static struct platform_device *rts7751r2d_devices[] __initdata = {
&uart_device,
&heartbeat_device,
- &cf_ide_device,
&sm501_device,
};
static int __init rts7751r2d_devices_setup(void)
{
+ int ret;
+
+ if (ctrl_inw(PA_BVERREG) == 0x10) { /* only working on R2D-PLUS */
+ ret = platform_device_register(&cf_ide_device);
+ if (ret)
+ return ret;
+ }
+
return platform_add_devices(rts7751r2d_devices,
ARRAY_SIZE(rts7751r2d_devices));
}
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
#
# DMA support
#
-CONFIG_SH_DMA=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=8
+# CONFIG_SH_DMA is not set
+# CONFIG_NR_ONCHIP_DMA_CHANNELS is not set
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=bios"
+CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
#
# Bus options
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_SH_STANDARD_BIOS=y
+# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 12:55:47 2006
+# Linux kernel version: 2.6.23-rc1
+# Thu Jul 26 11:49:11 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-CONFIG_SH_SECUREEDGE5410=y
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x01000000
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_INTC_IRQ=y
+CONFIG_CPU_HAS_IPR_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+CONFIG_SH_SECUREEDGE5410=y
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
#
-# Timer support
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=60000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU Frequency scaling
#
# DMA support
#
+CONFIG_SH_DMA_API=y
CONFIG_SH_DMA=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+CONFIG_NR_ONCHIP_DMA_CHANNELS=8
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
# Bus options
#
+CONFIG_SH_CONCAT_FS=y
CONFIG_PCI=y
-# CONFIG_SH_PCIDMA_NONCOHERENT is not set
+CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+CONFIG_MTD_BLOCK_RO=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
#
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_STNIC is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
+CONFIG_8139CP=y
CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
+CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_SH_SCI is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Console display driver support
+# Display device support
#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
#
# Real Time Clock
#
# DMA Devices
#
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
#
# File systems
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
#
# Network File Systems
#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_NLS is not set
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
#
# Profiling support
#
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
# CONFIG_CRYPTO is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
-CONFIG_CPU_SUBTYPE_SH7751=y
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
CONFIG_CPU_SUBTYPE_SH7751R=y
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
lds r10, pr
rts
nop
-0: sti
- mov.l 3f, r0
+0: mov.l 3f, r0
mov r9, r6
mov r8, r5
jmp @r0
set_exception_table_evt(0x800, do_reserved_inst);
set_exception_table_evt(0x820, do_illegal_slot_inst);
#elif defined(CONFIG_SH_FPU)
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+ set_exception_table_evt(0xd80, do_fpu_state_restore);
+ set_exception_table_evt(0xda0, do_fpu_state_restore);
+#else
set_exception_table_evt(0x800, do_fpu_state_restore);
set_exception_table_evt(0x820, do_fpu_state_restore);
#endif
+#endif
#ifdef CONFIG_CPU_SH2
set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler);
obj-$(CONFIG_CPU_SH3) += cache-sh3.o
obj-$(CONFIG_CPU_SH4) += cache-sh4.o
-mmu-y := fault-nommu.o tlb-nommu.o pg-nommu.o
+mmu-y := tlb-nommu.o pg-nommu.o
+mmu-$(CONFIG_CPU_SH3) += fault-nommu.o
+mmu-$(CONFIG_CPU_SH4) += fault-nommu.o
mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \
ioremap.o
-/*
+/*
* arch/sh/mm/fault-nommu.c
*
- * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* Based on linux/arch/sh/mm/fault.c:
* Copyright (C) 1999 Niibe Yutaka
*
* Released under the terms of the GNU GPL v2.0.
*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-
+#include <linux/hardirq.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/cacheflush.h>
-
-#if defined(CONFIG_SH_KGDB)
+#include <asm/ptrace.h>
#include <asm/kgdb.h>
-#endif
-
-extern void die(const char *,struct pt_regs *,long);
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*/
-asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
- unsigned long address)
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
+ unsigned long writeaccess,
+ unsigned long address)
{
+ trace_hardirqs_on();
+ local_irq_enable();
+
#if defined(CONFIG_SH_KGDB)
if (kgdb_nofault && kgdb_bus_err_hook)
kgdb_bus_err_hook();
do_exit(SIGKILL);
}
-asmlinkage int __do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
- unsigned long address)
+asmlinkage int __kprobes __do_page_fault(struct pt_regs *regs,
+ unsigned long writeaccess,
+ unsigned long address)
{
#if defined(CONFIG_SH_KGDB)
if (kgdb_nofault && kgdb_bus_err_hook)
kgdb_bus_err_hook();
#endif
- if (address >= TASK_SIZE)
- return 1;
-
- return 0;
+ return (address >= TASK_SIZE);
}
-
printk(KERN_ALERT "pc = %08lx\n", regs->pc);
page = (unsigned long)get_TTB();
if (page) {
- page = ((__typeof__(page) *) __va(page))[address >>
- PGDIR_SHIFT];
+ page = ((__typeof__(page) *)page)[address >> PGDIR_SHIFT];
printk(KERN_ALERT "*pde = %08lx\n", page);
if (page & _PAGE_PRESENT) {
page &= PAGE_MASK;
-/* $Id: entry.S,v 1.170 2001/11/13 00:57:05 davem Exp $
- * arch/sparc/kernel/entry.S: Sparc trap low-level entry points.
+/* arch/sparc/kernel/entry.S: Sparc trap low-level entry points.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1996-1999 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
RESTORE_ALL
#endif
-#ifdef CONFIG_BLK_DEV_FD
+#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
.text
.align 4
.globl floppy_hardint
set_irq_regs(old_regs);
}
-#ifdef CONFIG_BLK_DEV_FD
-extern void floppy_interrupt(int irq, void *dev_id);
-
-void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
-{
- struct pt_regs *old_regs;
- int cpu = smp_processor_id();
-
- old_regs = set_irq_regs(regs);
- disable_pil_irq(irq);
- irq_enter();
- kstat_cpu(cpu).irqs[irq]++;
- floppy_interrupt(irq, dev_id);
- irq_exit();
- enable_pil_irq(irq);
- set_irq_regs(old_regs);
- // XXX Eek, it's totally changed with preempt_count() and such
- // if (softirq_pending(cpu))
- // do_softirq();
-}
-#endif
+#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
/* Fast IRQs on the Sparc can only have one routine attached to them,
* thus no sharing possible.
*/
-int request_fast_irq(unsigned int irq,
- irq_handler_t handler,
- unsigned long irqflags, const char *devname)
+static int request_fast_irq(unsigned int irq,
+ void (*handler)(void),
+ unsigned long irqflags, const char *devname)
{
struct irqaction *action;
unsigned long flags;
*/
flush_cache_all();
- action->handler = handler;
action->flags = irqflags;
cpus_clear(action->mask);
action->name = devname;
return ret;
}
+/* These variables are used to access state from the assembler
+ * interrupt handler, floppy_hardint, so we cannot put these in
+ * the floppy driver image because that would not work in the
+ * modular case.
+ */
+volatile unsigned char *fdc_status;
+EXPORT_SYMBOL(fdc_status);
+
+char *pdma_vaddr;
+EXPORT_SYMBOL(pdma_vaddr);
+
+unsigned long pdma_size;
+EXPORT_SYMBOL(pdma_size);
+
+volatile int doing_pdma;
+EXPORT_SYMBOL(doing_pdma);
+
+char *pdma_base;
+EXPORT_SYMBOL(pdma_base);
+
+unsigned long pdma_areasize;
+EXPORT_SYMBOL(pdma_areasize);
+
+extern void floppy_hardint(void);
+
+static irqreturn_t (*floppy_irq_handler)(int irq, void *dev_id);
+
+void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct pt_regs *old_regs;
+ int cpu = smp_processor_id();
+
+ old_regs = set_irq_regs(regs);
+ disable_pil_irq(irq);
+ irq_enter();
+ kstat_cpu(cpu).irqs[irq]++;
+ floppy_irq_handler(irq, dev_id);
+ irq_exit();
+ enable_pil_irq(irq);
+ set_irq_regs(old_regs);
+ // XXX Eek, it's totally changed with preempt_count() and such
+ // if (softirq_pending(cpu))
+ // do_softirq();
+}
+
+int sparc_floppy_request_irq(int irq, unsigned long flags,
+ irqreturn_t (*irq_handler)(int irq, void *))
+{
+ floppy_irq_handler = irq_handler;
+ return request_fast_irq(irq, floppy_hardint, flags, "floppy");
+}
+EXPORT_SYMBOL(sparc_floppy_request_irq);
+
+#endif
+
int request_irq(unsigned int irq,
irq_handler_t handler,
unsigned long irqflags, const char * devname, void *dev_id)
EXPORT_SYMBOL(set_auxio);
EXPORT_SYMBOL(get_auxio);
#endif
-EXPORT_SYMBOL(request_fast_irq);
EXPORT_SYMBOL(io_remap_pfn_range);
/* P3: iounit_xxx may be needed, sun4d users */
/* EXPORT_SYMBOL(iounit_map_dma_init); */
int self_id_count, i, j, reg;
int generation, new_generation;
unsigned long flags;
+ void *free_rom = NULL;
+ dma_addr_t free_rom_bus = 0;
reg = reg_read(ohci, OHCI1394_NodeID);
if (!(reg & OHCI1394_NodeID_idValid)) {
*/
if (ohci->next_config_rom != NULL) {
- dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
- ohci->config_rom, ohci->config_rom_bus);
+ free_rom = ohci->config_rom;
+ free_rom_bus = ohci->config_rom_bus;
ohci->config_rom = ohci->next_config_rom;
ohci->config_rom_bus = ohci->next_config_rom_bus;
ohci->next_config_rom = NULL;
spin_unlock_irqrestore(&ohci->lock, flags);
+ if (free_rom)
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ free_rom, free_rom_bus);
+
fw_core_handle_bus_reset(&ohci->card, ohci->node_id, generation,
self_id_count, ohci->self_id_buffer);
}
{
struct fw_ohci *ohci;
unsigned long flags;
- int retval = 0;
+ int retval = -EBUSY;
__be32 *next_config_rom;
dma_addr_t next_config_rom_bus;
reg_write(ohci, OHCI1394_ConfigROMmap,
ohci->next_config_rom_bus);
- } else {
- dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
- next_config_rom, next_config_rom_bus);
- retval = -EBUSY;
+ retval = 0;
}
spin_unlock_irqrestore(&ohci->lock, flags);
*/
if (retval == 0)
fw_core_initiate_bus_reset(&ohci->card, 1);
+ else
+ dma_free_coherent(ohci->card.device, CONFIG_ROM_SIZE,
+ next_config_rom, next_config_rom_bus);
return retval;
}
struct fw_unit *unit = sd->unit;
struct fw_device *device = fw_device(unit->device.parent);
struct sbp2_command_orb *orb;
+ unsigned max_payload;
/*
* Bidirectional commands are not yet implemented, and unknown
* specifies the max payload size as 2 ^ (max_payload + 2), so
* if we set this to max_speed + 7, we get the right value.
*/
+ max_payload = min(device->max_speed + 7,
+ device->card->max_receive - 1);
orb->request.misc =
- COMMAND_ORB_MAX_PAYLOAD(device->max_speed + 7) |
+ COMMAND_ORB_MAX_PAYLOAD(max_payload) |
COMMAND_ORB_SPEED(device->max_speed) |
COMMAND_ORB_NOTIFY;
}
EXPORT_SYMBOL(fw_core_handle_response);
-const struct fw_address_region topology_map_region =
+static const struct fw_address_region topology_map_region =
{ .start = 0xfffff0001000ull, .end = 0xfffff0001400ull, };
static void
.address_callback = handle_topology_map,
};
-const struct fw_address_region registers_region =
+static const struct fw_address_region registers_region =
{ .start = 0xfffff0000000ull, .end = 0xfffff0000400ull, };
static void
unsigned long reset_jiffies;
unsigned long long guid;
- int max_receive;
+ unsigned max_receive;
int link_speed;
int config_rom_generation;
config IEEE1394_SBP2_PHYS_DMA
bool "Enable replacement for physical DMA in SBP2"
- depends on IEEE1394 && IEEE1394_SBP2 && EXPERIMENTAL && (X86_32 || PPC_32)
+ depends on IEEE1394_SBP2 && VIRT_TO_BUS && EXPERIMENTAL
help
This builds sbp2 for use with non-OHCI host adapters which do not
support physical DMA or for when ohci1394 is run with phys_dma=0.
SBP2_ERR("failed to register lower 4GB address range");
goto failed_alloc;
}
-#else
- if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) {
- SBP2_ERR("failed to set 4GB DMA mask");
- goto failed_alloc;
- }
#endif
}
config BATTERY_PMU
tristate "Apple PMU battery"
- depends on ADB_PMU
+ depends on PPC32 && ADB_PMU
help
Say Y here to expose battery information on Apple machines
through the generic battery class.
return uart_set_options(port, co, baud, parity, bits, flow);
}
-static int __init serial8250_console_early_setup(void)
+static int serial8250_console_early_setup(void)
{
return serial8250_find_port_for_earlycon();
}
return 0;
}
-int __init serial8250_find_port_for_earlycon(void)
+int serial8250_find_port_for_earlycon(void)
{
struct early_serial8250_device *device = &early_device;
struct uart_port *port = &device->port;
struct fb_info *info;
struct cg6_par *par;
int linebytes, err;
+ int dblbuf;
info = framebuffer_alloc(sizeof(struct cg6_par), &op->dev);
linebytes = of_getintprop_default(dp, "linebytes",
info->var.xres);
par->fbsize = PAGE_ALIGN(linebytes * info->var.yres);
- if (of_find_property(dp, "dblbuf", NULL))
+
+ dblbuf = of_getintprop_default(dp, "dblbuf", 0);
+ if (dblbuf)
par->fbsize *= 4;
par->fbc = of_ioremap(&op->resource[0], CG6_FBC_OFFSET,
#define PA_VERREG 0xa4000032 /* FPGA Version Register */
#define PA_INPORT 0xa4000034 /* KEY Input Port control */
#define PA_OUTPORT 0xa4000036 /* LED control */
-#define PA_DMPORT 0xa4000038 /* DM270 Output Port control */
+#define PA_BVERREG 0xa4000038 /* Board Revision Register */
#define PA_AX88796L 0xaa000400 /* AX88796L Area */
#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
#define O_LARGEFILE 0x40000
#define O_DIRECT 0x100000 /* direct disk access hint */
#define O_NOATIME 0x200000
+#define O_CLOEXEC 0x400000
#define F_GETOWN 5 /* for sockets. */
#define F_SETOWN 6 /* for sockets. */
#define __ARCH_FLOCK_PAD short __unused;
#define __ARCH_FLOCK64_PAD short __unused;
-#include <asm-generic/fcntl.h>
#endif
/* You'll only ever find one controller on a SparcStation anyways. */
static struct sun_flpy_controller *sun_fdc = NULL;
-volatile unsigned char *fdc_status;
+extern volatile unsigned char *fdc_status;
struct sun_floppy_ops {
unsigned char (*fd_inb)(int port);
* underruns. If non-zero, doing_pdma encodes the direction of
* the transfer for debugging. 1=read 2=write
*/
-char *pdma_vaddr;
-unsigned long pdma_size;
-volatile int doing_pdma = 0;
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
/* This is software state */
-char *pdma_base = NULL;
-unsigned long pdma_areasize;
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
/* Common routines to all controller types on the Sparc. */
static __inline__ void virtual_dma_init(void)
}
/* Our low-level entry point in arch/sparc/kernel/entry.S */
-irqreturn_t floppy_hardint(int irq, void *unused);
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+ irqreturn_t (*irq_handler)(int irq, void *));
static int sun_fd_request_irq(void)
{
if(!once) {
once = 1;
- error = request_fast_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy");
+ error = sparc_floppy_request_irq(FLOPPY_IRQ,
+ IRQF_DISABLED,
+ floppy_interrupt);
return ((error == 0) ? 0 : -1);
} else return 0;
}
-/* $Id: irq.h,v 1.32 2000/08/26 02:42:28 anton Exp $
- * irq.h: IRQ registers on the Sparc.
+/* irq.h: IRQ registers on the Sparc.
*
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC_IRQ_H
#define irq_canonicalize(irq) (irq)
-extern int request_fast_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, __const__ char *devname);
-
#endif
dma_ops->sync_single_for_device(dev, dma_handle, size, direction);
}
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle,
+ unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+
+
static inline void dma_sync_sg_for_cpu(struct device *dev,
struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
#define O_LARGEFILE 0x40000
#define O_DIRECT 0x100000 /* direct disk access hint */
#define O_NOATIME 0x200000
-
+#define O_CLOEXEC 0x400000
#define F_GETOWN 5 /* for sockets. */
#define F_SETOWN 6 /* for sockets. */
void sctp_assocs_proc_exit(void);
+/*
+ * Module global variables
+ */
+
+ /*
+ * sctp/protocol.c
+ */
+extern struct kmem_cache *sctp_chunk_cachep __read_mostly;
+extern struct kmem_cache *sctp_bucket_cachep __read_mostly;
+
/*
* Section: Macros, externs, and inlines
*/
extern int tcp_v4_tw_remember_stamp(struct inet_timewait_sock *tw);
-extern int tcp_sendmsg(struct kiocb *iocb, struct sock *sk,
+extern int tcp_sendmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size);
extern ssize_t tcp_sendpage(struct socket *sock, struct page *page, int offset, size_t size, int flags);
__kill_pgrp_info(SIGCONT, SEND_SIG_PRIV, pgrp);
}
- /* Let father know we died
+ /* Let father know we died
*
* Thread signals are configurable, but you aren't going to use
* that to send signals to arbitary processes.
* If our self_exec id doesn't match our parent_exec_id then
* we have changed execution domain as these two values started
* the same after a fork.
- *
*/
-
if (tsk->exit_signal != SIGCHLD && tsk->exit_signal != -1 &&
( tsk->parent_exec_id != t->self_exec_id ||
tsk->self_exec_id != tsk->parent_exec_id)
}
state = EXIT_ZOMBIE;
- if (tsk->exit_signal == -1 &&
- (likely(tsk->ptrace == 0) ||
- unlikely(tsk->parent->signal->flags & SIGNAL_GROUP_EXIT)))
+ if (tsk->exit_signal == -1 && likely(!tsk->ptrace))
state = EXIT_DEAD;
tsk->exit_state = state;
return 0;
}
-int __init update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
+int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options)
{
struct console_cmdline *c;
int i;
(current->ptrace & PT_ATTACHED)))
return 0;
- if (unlikely(current->signal == current->parent->signal) &&
- unlikely(current->signal->flags & SIGNAL_GROUP_EXIT))
- return 0;
-
/*
* Are we in the middle of do_coredump?
* If so and our tracer is also part of the coredump stopping
.shutdown = inet_shutdown,
.setsockopt = sock_common_setsockopt,
.getsockopt = sock_common_getsockopt,
- .sendmsg = inet_sendmsg,
+ .sendmsg = tcp_sendmsg,
.recvmsg = sock_common_recvmsg,
.mmap = sock_no_mmap,
.sendpage = tcp_sendpage,
struct ct_expect_iter_state *st;
int ret;
- st = kmalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
- if (st == NULL)
+ st = kzalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
+ if (!st)
return -ENOMEM;
ret = seq_open(file, &exp_seq_ops);
if (ret)
goto out_free;
seq = file->private_data;
seq->private = st;
- memset(st, 0, sizeof(struct ct_expect_iter_state));
return ret;
out_free:
kfree(st);
{
struct seq_file *seq;
int rc = -ENOMEM;
- struct raw_iter_state *s = kmalloc(sizeof(*s), GFP_KERNEL);
+ struct raw_iter_state *s;
+ s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s)
goto out;
rc = seq_open(file, &raw_seq_ops);
seq = file->private_data;
seq->private = s;
- memset(s, 0, sizeof(*s));
out:
return rc;
out_kfree:
{
struct seq_file *seq;
int rc = -ENOMEM;
- struct rt_cache_iter_state *s = kmalloc(sizeof(*s), GFP_KERNEL);
+ struct rt_cache_iter_state *s;
+ s = kzalloc(sizeof(*s), GFP_KERNEL);
if (!s)
goto out;
rc = seq_open(file, &rt_cache_seq_ops);
goto out_kfree;
seq = file->private_data;
seq->private = s;
- memset(s, 0, sizeof(*s));
out:
return rc;
out_kfree:
return tmp;
}
-int tcp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
+int tcp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
size_t size)
{
+ struct sock *sk = sock->sk;
struct iovec *iov;
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
#define FLAG_DATA_LOST 0x80 /* SACK detected data lossage. */
#define FLAG_SLOWPATH 0x100 /* Do not skip RFC checks for window update.*/
#define FLAG_ONLY_ORIG_SACKED 0x200 /* SACKs only non-rexmit sent before RTO */
+#define FLAG_SND_UNA_ADVANCED 0x400 /* Snd_una was changed (!= FLAG_DATA_ACKED) */
+#define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained DSACK info */
#define FLAG_ACKED (FLAG_DATA_ACKED|FLAG_SYN_ACKED)
#define FLAG_NOT_DUP (FLAG_DATA|FLAG_WIN_UPDATE|FLAG_ACKED)
#define FLAG_CA_ALERT (FLAG_DATA_SACKED|FLAG_ECE)
#define FLAG_FORWARD_PROGRESS (FLAG_ACKED|FLAG_DATA_SACKED)
+#define FLAG_ANY_PROGRESS (FLAG_FORWARD_PROGRESS|FLAG_SND_UNA_ADVANCED)
#define IsReno(tp) ((tp)->rx_opt.sack_ok == 0)
#define IsFack(tp) ((tp)->rx_opt.sack_ok & 2)
/* Check for D-SACK. */
if (before(ntohl(sp[0].start_seq), TCP_SKB_CB(ack_skb)->ack_seq)) {
+ flag |= FLAG_DSACKING_ACK;
found_dup_sack = 1;
tp->rx_opt.sack_ok |= 4;
NET_INC_STATS_BH(LINUX_MIB_TCPDSACKRECV);
} else if (num_sacks > 1 &&
!after(ntohl(sp[0].end_seq), ntohl(sp[1].end_seq)) &&
!before(ntohl(sp[0].start_seq), ntohl(sp[1].start_seq))) {
+ flag |= FLAG_DSACKING_ACK;
found_dup_sack = 1;
tp->rx_opt.sack_ok |= 4;
NET_INC_STATS_BH(LINUX_MIB_TCPDSACKOFORECV);
struct tcp_sock *tp = tcp_sk(sk);
int decr = tp->snd_cwnd_cnt + 1;
- if ((flag&FLAG_FORWARD_PROGRESS) ||
+ if ((flag&(FLAG_ANY_PROGRESS|FLAG_DSACKING_ACK)) ||
(IsReno(tp) && !(flag&FLAG_NOT_DUP))) {
tp->snd_cwnd_cnt = decr&1;
decr >>= 1;
* tcp_xmit_retransmit_queue().
*/
static void
-tcp_fastretrans_alert(struct sock *sk, u32 prior_snd_una,
- int prior_packets, int flag)
+tcp_fastretrans_alert(struct sock *sk, int prior_packets, int flag)
{
struct inet_connection_sock *icsk = inet_csk(sk);
struct tcp_sock *tp = tcp_sk(sk);
- int is_dupack = (tp->snd_una == prior_snd_una &&
- (!(flag&FLAG_NOT_DUP) ||
- ((flag&FLAG_DATA_SACKED) &&
- (tp->fackets_out > tp->reordering))));
+ int is_dupack = !(flag&(FLAG_SND_UNA_ADVANCED|FLAG_NOT_DUP));
+ int do_lost = is_dupack || ((flag&FLAG_DATA_SACKED) &&
+ (tp->fackets_out > tp->reordering));
/* Some technical things:
* 1. Reno does not count dupacks (sacked_out) automatically. */
/* F. Process state. */
switch (icsk->icsk_ca_state) {
case TCP_CA_Recovery:
- if (prior_snd_una == tp->snd_una) {
+ if (!(flag & FLAG_SND_UNA_ADVANCED)) {
if (IsReno(tp) && is_dupack)
tcp_add_reno_sack(sk);
} else {
int acked = prior_packets - tp->packets_out;
if (IsReno(tp))
tcp_remove_reno_sacks(sk, acked);
- is_dupack = tcp_try_undo_partial(sk, acked);
+ do_lost = tcp_try_undo_partial(sk, acked);
}
break;
case TCP_CA_Loss:
/* Loss is undone; fall through to processing in Open state. */
default:
if (IsReno(tp)) {
- if (tp->snd_una != prior_snd_una)
+ if (flag & FLAG_SND_UNA_ADVANCED)
tcp_reset_reno_sack(tp);
if (is_dupack)
tcp_add_reno_sack(sk);
tcp_set_ca_state(sk, TCP_CA_Recovery);
}
- if (is_dupack || tcp_head_timedout(sk))
+ if (do_lost || tcp_head_timedout(sk))
tcp_update_scoreboard(sk);
tcp_cwnd_down(sk, flag);
tcp_xmit_retransmit_queue(sk);
* to prove that the RTO is indeed spurious. It transfers the control
* from F-RTO to the conventional RTO recovery
*/
-static int tcp_process_frto(struct sock *sk, u32 prior_snd_una, int flag)
+static int tcp_process_frto(struct sock *sk, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
* ACK isn't duplicate nor advances window, e.g., opposite dir
* data, winupdate
*/
- if ((tp->snd_una == prior_snd_una) && (flag&FLAG_NOT_DUP) &&
- !(flag&FLAG_FORWARD_PROGRESS))
+ if (!(flag&FLAG_ANY_PROGRESS) && (flag&FLAG_NOT_DUP))
return 1;
if (!(flag&FLAG_DATA_ACKED)) {
if (before(ack, prior_snd_una))
goto old_ack;
+ if (after(ack, prior_snd_una))
+ flag |= FLAG_SND_UNA_ADVANCED;
+
if (sysctl_tcp_abc) {
if (icsk->icsk_ca_state < TCP_CA_CWR)
tp->bytes_acked += ack - prior_snd_una;
flag |= tcp_clean_rtx_queue(sk, &seq_rtt);
if (tp->frto_counter)
- frto_cwnd = tcp_process_frto(sk, prior_snd_una, flag);
+ frto_cwnd = tcp_process_frto(sk, flag);
if (tcp_ack_is_dubious(sk, flag)) {
/* Advance CWND, if state allows this. */
if ((flag & FLAG_DATA_ACKED) && !frto_cwnd &&
tcp_may_raise_cwnd(sk, flag))
tcp_cong_avoid(sk, ack, prior_in_flight, 0);
- tcp_fastretrans_alert(sk, prior_snd_una, prior_packets, flag);
+ tcp_fastretrans_alert(sk, prior_packets, flag);
} else {
if ((flag & FLAG_DATA_ACKED) && !frto_cwnd)
tcp_cong_avoid(sk, ack, prior_in_flight, 1);
.shutdown = tcp_shutdown,
.setsockopt = tcp_setsockopt,
.getsockopt = tcp_getsockopt,
- .sendmsg = tcp_sendmsg,
.recvmsg = tcp_recvmsg,
.backlog_rcv = tcp_v4_do_rcv,
.hash = tcp_v4_hash,
.shutdown = inet_shutdown, /* ok */
.setsockopt = sock_common_setsockopt, /* ok */
.getsockopt = sock_common_getsockopt, /* ok */
- .sendmsg = inet_sendmsg, /* ok */
+ .sendmsg = tcp_sendmsg, /* ok */
.recvmsg = sock_common_recvmsg, /* ok */
.mmap = sock_no_mmap,
.sendpage = tcp_sendpage,
.shutdown = tcp_shutdown,
.setsockopt = tcp_setsockopt,
.getsockopt = tcp_getsockopt,
- .sendmsg = tcp_sendmsg,
.recvmsg = tcp_recvmsg,
.backlog_rcv = tcp_v6_do_rcv,
.hash = tcp_v6_hash,
x->sel.prefixlen_s = addr->sadb_address_prefixlen;
}
+ if (!x->sel.family)
+ x->sel.family = x->props.family;
+
if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
struct sadb_x_nat_t_type* n_type;
struct xfrm_encap_tmpl *natt;
struct ct_expect_iter_state *st;
int ret;
- st = kmalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
- if (st == NULL)
+ st = kzalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
+ if (!st)
return -ENOMEM;
ret = seq_open(file, &exp_seq_ops);
if (ret)
goto out_free;
seq = file->private_data;
seq->private = st;
- memset(st, 0, sizeof(struct ct_expect_iter_state));
return ret;
out_free:
kfree(st);
* Return 0 - If further processing is needed.
* Return 1 - If the packet can be discarded right away.
*/
-int sctp_rcv_ootb(struct sk_buff *skb)
+static int sctp_rcv_ootb(struct sk_buff *skb)
{
sctp_chunkhdr_t *ch;
__u8 *ch_end;
newsctp6sk = (struct sctp6_sock *)newsk;
inet_sk(newsk)->pinet6 = &newsctp6sk->inet6;
+ sctp_sk(newsk)->v4mapped = sctp_sk(sk)->v4mapped;
+
newinet = inet_sk(newsk);
newnp = inet6_sk(newsk);
#include <net/sctp/sctp.h>
#include <net/sctp/sm.h>
-extern struct kmem_cache *sctp_chunk_cachep;
-
SCTP_STATIC
struct sctp_chunk *sctp_make_chunk(const struct sctp_association *asoc,
__u8 type, __u8 flags, int paylen);
const void *payload, size_t paylen)
{
sctp_errhdr_t err;
- int padlen;
__u16 len;
/* Cause code constants are now defined in network order. */
err.cause = cause_code;
len = sizeof(sctp_errhdr_t) + paylen;
- padlen = len % 4;
err.length = htons(len);
- len += padlen;
chunk->subh.err_hdr = sctp_addto_chunk(chunk, sizeof(sctp_errhdr_t), &err);
sctp_addto_chunk(chunk, paylen, payload);
}
do_gettimeofday(&tv);
if (!asoc && tv_lt(bear_cookie->expiration, tv)) {
- __u16 len;
/*
* Section 3.3.10.3 Stale Cookie Error (3)
*
const struct sctp_association *asoc,
struct sctp_transport *transport);
+static sctp_disposition_t sctp_sf_abort_violation(
+ const struct sctp_association *asoc,
+ void *arg,
+ sctp_cmd_seq_t *commands,
+ const __u8 *payload,
+ const size_t paylen);
+
static sctp_disposition_t sctp_sf_violation_chunklen(
const struct sctp_endpoint *ep,
const struct sctp_association *asoc,
void *arg,
sctp_cmd_seq_t *commands);
+static sctp_disposition_t sctp_sf_violation_ctsn(
+ const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type,
+ void *arg,
+ sctp_cmd_seq_t *commands);
+
/* Small helper function that checks if the chunk length
* is of the appropriate length. The 'required_length' argument
* is set to be the size of a specific chunk we are testing.
return SCTP_DISPOSITION_DISCARD;
}
+ /* If Cumulative TSN Ack beyond the max tsn currently
+ * send, terminating the association and respond to the
+ * sender with an ABORT.
+ */
+ if (!TSN_lt(ctsn, asoc->next_tsn))
+ return sctp_sf_violation_ctsn(ep, asoc, type, arg, commands);
+
/* Return this SACK for further processing. */
sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_SACK, SCTP_SACKH(sackh));
return SCTP_DISPOSITION_VIOLATION;
}
-
/*
- * Handle a protocol violation when the chunk length is invalid.
- * "Invalid" length is identified as smaller then the minimal length a
- * given chunk can be. For example, a SACK chunk has invalid length
- * if it's length is set to be smaller then the size of sctp_sack_chunk_t.
- *
- * We inform the other end by sending an ABORT with a Protocol Violation
- * error code.
- *
- * Section: Not specified
- * Verification Tag: Nothing to do
- * Inputs
- * (endpoint, asoc, chunk)
- *
- * Outputs
- * (reply_msg, msg_up, counters)
- *
- * Generate an ABORT chunk and terminate the association.
+ * Common function to handle a protocol violation.
*/
-static sctp_disposition_t sctp_sf_violation_chunklen(
- const struct sctp_endpoint *ep,
+static sctp_disposition_t sctp_sf_abort_violation(
const struct sctp_association *asoc,
- const sctp_subtype_t type,
void *arg,
- sctp_cmd_seq_t *commands)
+ sctp_cmd_seq_t *commands,
+ const __u8 *payload,
+ const size_t paylen)
{
struct sctp_chunk *chunk = arg;
struct sctp_chunk *abort = NULL;
- char err_str[]="The following chunk had invalid length:";
/* Make the abort chunk. */
- abort = sctp_make_abort_violation(asoc, chunk, err_str,
- sizeof(err_str));
+ abort = sctp_make_abort_violation(asoc, chunk, payload, paylen);
if (!abort)
goto nomem;
return SCTP_DISPOSITION_NOMEM;
}
+/*
+ * Handle a protocol violation when the chunk length is invalid.
+ * "Invalid" length is identified as smaller then the minimal length a
+ * given chunk can be. For example, a SACK chunk has invalid length
+ * if it's length is set to be smaller then the size of sctp_sack_chunk_t.
+ *
+ * We inform the other end by sending an ABORT with a Protocol Violation
+ * error code.
+ *
+ * Section: Not specified
+ * Verification Tag: Nothing to do
+ * Inputs
+ * (endpoint, asoc, chunk)
+ *
+ * Outputs
+ * (reply_msg, msg_up, counters)
+ *
+ * Generate an ABORT chunk and terminate the association.
+ */
+static sctp_disposition_t sctp_sf_violation_chunklen(
+ const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type,
+ void *arg,
+ sctp_cmd_seq_t *commands)
+{
+ char err_str[]="The following chunk had invalid length:";
+
+ return sctp_sf_abort_violation(asoc, arg, commands, err_str,
+ sizeof(err_str));
+}
+
+/* Handle a protocol violation when the peer trying to advance the
+ * cumulative tsn ack to a point beyond the max tsn currently sent.
+ *
+ * We inform the other end by sending an ABORT with a Protocol Violation
+ * error code.
+ */
+static sctp_disposition_t sctp_sf_violation_ctsn(
+ const struct sctp_endpoint *ep,
+ const struct sctp_association *asoc,
+ const sctp_subtype_t type,
+ void *arg,
+ sctp_cmd_seq_t *commands)
+{
+ char err_str[]="The cumulative tsn ack beyond the max tsn currently sent:";
+
+ return sctp_sf_abort_violation(asoc, arg, commands, err_str,
+ sizeof(err_str));
+}
+
/***************************************************************************
* These are the state functions for handling primitive (Section 10) events.
***************************************************************************/
struct sctp_association *, sctp_socket_type_t);
static char *sctp_hmac_alg = SCTP_COOKIE_HMAC_ALG;
-extern struct kmem_cache *sctp_bucket_cachep;
-
/* Get the sndbuf space available at the time on the association. */
static inline int sctp_wspace(struct sctp_association *asoc)
{
*
* Only sctp_setsockopt_bindx() is supposed to call this function.
*/
-int sctp_bindx_add(struct sock *sk, struct sockaddr *addrs, int addrcnt)
+static int sctp_bindx_add(struct sock *sk, struct sockaddr *addrs, int addrcnt)
{
int cnt;
int retval = 0;
*
* Only sctp_setsockopt_bindx() is supposed to call this function.
*/
-int sctp_bindx_rem(struct sock *sk, struct sockaddr *addrs, int addrcnt)
+static int sctp_bindx_rem(struct sock *sk, struct sockaddr *addrs, int addrcnt)
{
struct sctp_sock *sp = sctp_sk(sk);
struct sctp_endpoint *ep = sp->ep;
int err = 0;
int addrcnt = 0;
int walk_size = 0;
- union sctp_addr *sa_addr;
+ union sctp_addr *sa_addr = NULL;
void *addr_buf;
unsigned short port;
unsigned int f_flags = 0;
goto out_free;
}
- err = sctp_verify_addr(sk, sa_addr, af->sockaddr_len);
+ /* Save current address so we can work with it */
+ memcpy(&to, sa_addr, af->sockaddr_len);
+
+ err = sctp_verify_addr(sk, &to, af->sockaddr_len);
if (err)
goto out_free;
if (asoc && asoc->peer.port && asoc->peer.port != port)
goto out_free;
- memcpy(&to, sa_addr, af->sockaddr_len);
/* Check if there already is a matching association on the
* endpoint (other than the one created here).
*/
- asoc2 = sctp_endpoint_lookup_assoc(ep, sa_addr, &transport);
+ asoc2 = sctp_endpoint_lookup_assoc(ep, &to, &transport);
if (asoc2 && asoc2 != asoc) {
if (asoc2->state >= SCTP_STATE_ESTABLISHED)
err = -EISCONN;
* make sure that there is no peeled-off association matching
* the peer address even on another socket.
*/
- if (sctp_endpoint_is_peeled_off(ep, sa_addr)) {
+ if (sctp_endpoint_is_peeled_off(ep, &to)) {
err = -EADDRNOTAVAIL;
goto out_free;
}
}
}
- scope = sctp_scope(sa_addr);
+ scope = sctp_scope(&to);
asoc = sctp_association_new(ep, sk, scope, GFP_KERNEL);
if (!asoc) {
err = -ENOMEM;
}
/* Prime the peer's transport structures. */
- transport = sctp_assoc_add_peer(asoc, sa_addr, GFP_KERNEL,
+ transport = sctp_assoc_add_peer(asoc, &to, GFP_KERNEL,
SCTP_UNKNOWN);
if (!transport) {
err = -ENOMEM;
/* Initialize sk's dport and daddr for getpeername() */
inet_sk(sk)->dport = htons(asoc->peer.port);
- af = sctp_get_af_specific(to.sa.sa_family);
- af->to_sk_daddr(&to, sk);
+ af = sctp_get_af_specific(sa_addr->sa.sa_family);
+ af->to_sk_daddr(sa_addr, sk);
sk->sk_err = 0;
/* in-kernel sockets don't generally have a file allocated to them
goto out_unlock;
}
if (sinfo_flags & SCTP_ABORT) {
- struct sctp_chunk *chunk;
chunk = sctp_make_abort_user(asoc, msg, msg_len);
if (!chunk) {
space_left, &bytes_copied);
if (cnt < 0) {
err = cnt;
- goto error;
+ goto error_lock;
}
goto copy_getaddrs;
}
addrlen = sctp_get_af_specific(temp.sa.sa_family)->sockaddr_len;
if (space_left < addrlen) {
err = -ENOMEM; /*fixme: right error?*/
- goto error;
+ goto error_lock;
}
memcpy(buf, &temp, addrlen);
buf += addrlen;
if (copy_to_user(to, addrs, bytes_copied)) {
err = -EFAULT;
- goto error;
+ goto out;
}
if (put_user(cnt, &((struct sctp_getaddrs __user *)optval)->addr_num)) {
err = -EFAULT;
- goto error;
+ goto out;
}
if (put_user(bytes_copied, optlen))
err = -EFAULT;
-error:
+
+ goto out;
+
+error_lock:
+ sctp_read_unlock(addr_lock);
+
+out:
kfree(addrs);
return err;
}
return err;
}
-void sctp_wait_for_close(struct sock *sk, long timeout)
+static void sctp_wait_for_close(struct sock *sk, long timeout)
{
DEFINE_WAIT(wait);
__u16 *start, __u16 *end)
{
int started, ended;
- __u16 _start, _end, offset;
+ __u16 start_, end_, offset;
/* We haven't found a gap yet. */
started = ended = 0;
offset = iter->start - map->base_tsn;
sctp_tsnmap_find_gap_ack(map->tsn_map, offset, map->len, 0,
- &started, &_start, &ended, &_end);
+ &started, &start_, &ended, &end_);
}
/* Do we need to check the overflow map? */
offset,
map->len,
map->len,
- &started, &_start,
- &ended, &_end);
+ &started, &start_,
+ &ended, &end_);
}
/* The Gap Ack Block happens to end at the end of the
*/
if (started && !ended) {
ended++;
- _end = map->len + map->len - 1;
+ end_ = map->len + map->len - 1;
}
/* If we found a Gap Ack Block, return the start and end and
int gap = map->cumulative_tsn_ack_point -
map->base_tsn;
- *start = _start - gap;
- *end = _end - gap;
+ *start = start_ - gap;
+ *end = end_ - gap;
/* Move the iterator forward. */
iter->start = map->cumulative_tsn_ack_point + *end + 1;
struct tipc_msg *msg = buf_msg(crs);
if ((msg_user(msg) == MSG_BUNDLER) && split_bundles) {
- u32 msgcount = msg_msgcnt(msg);
struct tipc_msg *m = msg_get_wrapped(msg);
unchar* pos = (unchar*)m;
+ msgcount = msg_msgcnt(msg);
while (msgcount--) {
msg_set_seqno(m,msg_seqno(msg));
tipc_link_tunnel(l_ptr, &tunnel_hdr, m,
* sequence overlapping with the requested sequence
*/
-void tipc_nameseq_subscribe(struct name_seq *nseq, struct subscription *s)
+static void tipc_nameseq_subscribe(struct name_seq *nseq, struct subscription *s)
{
struct sub_seq *sseq = nseq->sseqs;
char addr_string[16];
if (n_ptr->link_cnt >= 2) {
- char addr_string[16];
-
err("Attempt to create third link to %s\n",
addr_string_fill(addr_string, n_ptr->addr));
return NULL;
#include <linux/capability.h>
#include <linux/errno.h> /* return codes */
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/module.h> /* support for loadable modules */
#include <linux/slab.h> /* kmalloc(), kfree() */
#include <linux/mm.h>
void (*enable)(struct cs4231_dma_control *dma_cont, int on);
int (*request)(struct cs4231_dma_control *dma_cont, dma_addr_t bus_addr, size_t len);
unsigned int (*address)(struct cs4231_dma_control *dma_cont);
- void (*reset)(struct snd_cs4231 *chip);
void (*preallocate)(struct snd_cs4231 *chip, struct snd_pcm *pcm);
#ifdef EBUS_SUPPORT
struct ebus_dma_info ebus_info;
spin_lock_irqsave(&chip->lock, flags);
-
- /* Reset DMA engine (sbus only). */
- chip->p_dma.reset(chip);
-
__cs4231_readb(chip, CS4231P(chip, STATUS)); /* clear any pendings IRQ */
__cs4231_writeb(chip, 0, CS4231P(chip, STATUS));
mb();
if (!on) {
sbus_writel(0, base->regs + base->dir + APCNC);
sbus_writel(0, base->regs + base->dir + APCNVA);
- sbus_writel(0, base->regs + base->dir + APCC);
- sbus_writel(0, base->regs + base->dir + APCVA);
+ if ( base->dir == APC_PLAY ) {
+ sbus_writel(0, base->regs + base->dir + APCC);
+ sbus_writel(0, base->regs + base->dir + APCVA);
+ }
- /* ACK any APC interrupts. */
- csr = sbus_readl(base->regs + APCCSR);
- sbus_writel(csr, base->regs + APCCSR);
+ udelay(1200);
}
- udelay(1000);
csr = sbus_readl(base->regs + APCCSR);
shift = 0;
if ( base->dir == APC_PLAY )
return sbus_readl(base->regs + base->dir + APCVA);
}
-static void sbus_dma_reset(struct snd_cs4231 *chip)
-{
- sbus_writel(APC_CHIP_RESET, chip->port + APCCSR);
- sbus_writel(0x00, chip->port + APCCSR);
- sbus_writel(sbus_readl(chip->port + APCCSR) | APC_CDC_RESET,
- chip->port + APCCSR);
-
- udelay(20);
-
- sbus_writel(sbus_readl(chip->port + APCCSR) & ~APC_CDC_RESET,
- chip->port + APCCSR);
- sbus_writel(sbus_readl(chip->port + APCCSR) | (APC_XINT_ENA |
- APC_XINT_PENA |
- APC_XINT_CENA),
- chip->port + APCCSR);
-}
-
static void sbus_dma_preallocate(struct snd_cs4231 *chip, struct snd_pcm *pcm)
{
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_SBUS,
chip->p_dma.enable = sbus_dma_enable;
chip->p_dma.request = sbus_dma_request;
chip->p_dma.address = sbus_dma_addr;
- chip->p_dma.reset = sbus_dma_reset;
chip->p_dma.preallocate = sbus_dma_preallocate;
chip->c_dma.prepare = sbus_dma_prepare;
chip->c_dma.enable = sbus_dma_enable;
chip->c_dma.request = sbus_dma_request;
chip->c_dma.address = sbus_dma_addr;
- chip->c_dma.reset = sbus_dma_reset;
chip->c_dma.preallocate = sbus_dma_preallocate;
if (request_irq(sdev->irqs[0], snd_cs4231_sbus_interrupt,
return ebus_dma_addr(&dma_cont->ebus_info);
}
-static void _ebus_dma_reset(struct snd_cs4231 *chip)
-{
- return;
-}
-
static void _ebus_dma_preallocate(struct snd_cs4231 *chip, struct snd_pcm *pcm)
{
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
chip->p_dma.enable = _ebus_dma_enable;
chip->p_dma.request = _ebus_dma_request;
chip->p_dma.address = _ebus_dma_addr;
- chip->p_dma.reset = _ebus_dma_reset;
chip->p_dma.preallocate = _ebus_dma_preallocate;
chip->c_dma.prepare = _ebus_dma_prepare;
chip->c_dma.enable = _ebus_dma_enable;
chip->c_dma.request = _ebus_dma_request;
chip->c_dma.address = _ebus_dma_addr;
- chip->c_dma.reset = _ebus_dma_reset;
chip->c_dma.preallocate = _ebus_dma_preallocate;
chip->port = ioremap(edev->resource[0].start, 0x10);
projects / linux-2.6-omap-h63xx.git / commitdiff