SND_SOC_DAPM_MIXER("Output Mixer", WM8731_PWR, 4, 1, wm8731_output_mixer_controls,
ARRAY_SIZE(wm8731_output_mixer_controls)),
+If you dont want the mixer elements prefixed with the name of the mixer widget,
+you can use SND_SOC_DAPM_MIXER_NAMED_CTL instead. the parameters are the same
+as for SND_SOC_DAPM_MIXER.
2.3 Platform/Machine domain Widgets
-----------------------------------
/*
* R231 (0xE7) - Jack Status
*/
+#define WM8350_JACK_L_LVL 0x0800
#define WM8350_JACK_R_LVL 0x0400
/*
wcontrols, wncontrols)\
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \
+ wcontrols, wncontrols)\
+{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \
+ .shift = wshift, .invert = winvert, .kcontrols = wcontrols, \
+ .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \
{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = NULL, .num_kcontrols = 0}
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
+#define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \
+ wcontrols, wncontrols, wevent, wflags) \
+{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
+ .invert = winvert, .kcontrols = wcontrols, \
+ .num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MICBIAS_E(wname, wreg, wshift, winvert, wevent, wflags) \
{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = NULL, .num_kcontrols = 0, \
int snd_soc_dapm_sys_add(struct device *dev);
/* dapm audio pin control and status */
-int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin);
-int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin);
+int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin);
+int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin);
int snd_soc_dapm_sync(struct snd_soc_codec *codec);
/* dapm widget types */
snd_soc_dapm_mux, /* selects 1 analog signal from many inputs */
snd_soc_dapm_value_mux, /* selects 1 analog signal from many inputs */
snd_soc_dapm_mixer, /* mixes several analog signals together */
+ snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */
snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */
snd_soc_dapm_adc, /* analog to digital converter */
snd_soc_dapm_dac, /* digital to analog converter */
SND_SOC_BIAS_OFF,
};
+struct snd_jack;
+struct snd_soc_card;
struct snd_soc_device;
struct snd_soc_pcm_stream;
struct snd_soc_ops;
struct snd_soc_codec;
struct soc_enum;
struct snd_soc_ac97_ops;
+struct snd_soc_jack;
+struct snd_soc_jack_pin;
typedef int (*hw_write_t)(void *,const char* ,int);
typedef int (*hw_read_t)(void *,char* ,int);
int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
const struct snd_pcm_hardware *hw);
+/* Jack reporting */
+int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type,
+ struct snd_soc_jack *jack);
+void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask);
+int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_pin *pins);
+
/* codec IO */
#define snd_soc_read(codec, reg) codec->read(codec, reg)
#define snd_soc_write(codec, reg, value) codec->write(codec, reg, value)
*/
struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template,
void *data, char *long_name);
+int snd_soc_add_controls(struct snd_soc_codec *codec,
+ const struct snd_kcontrol_new *controls, int num_controls);
int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol,
int snd_soc_put_volsw_s8(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
+/**
+ * struct snd_soc_jack_pin - Describes a pin to update based on jack detection
+ *
+ * @pin: name of the pin to update
+ * @mask: bits to check for in reported jack status
+ * @invert: if non-zero then pin is enabled when status is not reported
+ */
+struct snd_soc_jack_pin {
+ struct list_head list;
+ const char *pin;
+ int mask;
+ bool invert;
+};
+
+struct snd_soc_jack {
+ struct snd_jack *jack;
+ struct snd_soc_card *card;
+ struct list_head pins;
+ int status;
+};
+
/* SoC PCM stream information */
struct snd_soc_pcm_stream {
char *stream_name;
tristate "ALSA for SoC audio support"
select SND_PCM
select AC97_BUS if SND_SOC_AC97_BUS
+ select SND_JACK if INPUT=y || INPUT=SND
---help---
If you want ASoC support, you should say Y here and also to the
-snd-soc-core-objs := soc-core.o soc-dapm.o
+snd-soc-core-objs := soc-core.o soc-dapm.o soc-jack.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
obj-$(CONFIG_SND_SOC) += codecs/
SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
};
-/* add non dapm controls */
-static int ad1980_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(ad1980_snd_ac97_controls); i++) {
- err = snd_ctl_add(codec->card, snd_soc_cnew(
- &ad1980_snd_ac97_controls[i], codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
static unsigned int ac97_read(struct snd_soc_codec *codec,
unsigned int reg)
{
ext_status = ac97_read(codec, AC97_EXTENDED_STATUS);
ac97_write(codec, AC97_EXTENDED_STATUS, ext_status&~0x3800);
- ad1980_add_controls(codec);
+ snd_soc_add_controls(codec, ad1980_snd_ac97_controls,
+ ARRAY_SIZE(ad1980_snd_ac97_controls));
ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "ad1980: failed to register card\n");
SOC_SINGLE("Mic Sidetone Volume", AK4535_VOL, 4, 7, 0),
};
-/* add non dapm controls */
-static int ak4535_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(ak4535_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&ak4535_snd_controls[i], codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Mono 1 Mixer */
static const struct snd_kcontrol_new ak4535_mono1_mixer_controls[] = {
SOC_DAPM_SINGLE("Mic Sidetone Switch", AK4535_SIG1, 4, 1, 0),
/* power on device */
ak4535_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- ak4535_add_controls(codec);
+ snd_soc_add_controls(codec, ak4535_snd_controls,
+ ARRAY_SIZE(ak4535_snd_controls));
ak4535_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_ENUM("Playback De-emphasis", ssm2602_enum[1]),
};
-/* add non dapm controls */
-static int ssm2602_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(ssm2602_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&ssm2602_snd_controls[i], codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Output Mixer */
static const struct snd_kcontrol_new ssm2602_output_mixer_controls[] = {
SOC_DAPM_SINGLE("Line Bypass Switch", SSM2602_APANA, 3, 1, 0),
APANA_ENABLE_MIC_BOOST);
ssm2602_write(codec, SSM2602_PWR, 0);
- ssm2602_add_controls(codec);
+ snd_soc_add_controls(codec, ssm2602_snd_controls,
+ ARRAY_SIZE(ssm2602_snd_controls));
ssm2602_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_ENUM("Playback De-emphasis", tlv320aic23_deemph),
};
-/* add non dapm controls */
-static int tlv320aic23_add_controls(struct snd_soc_codec *codec)
-{
-
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(tlv320aic23_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&tlv320aic23_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-
-}
-
/* PGA Mixer controls for Line and Mic switch */
static const struct snd_kcontrol_new tlv320aic23_output_mixer_controls[] = {
SOC_DAPM_SINGLE("Line Bypass Switch", TLV320AIC23_ANLG, 3, 1, 0),
tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x1);
- tlv320aic23_add_controls(codec);
+ snd_soc_add_controls(codec, tlv320aic23_snd_controls,
+ ARRAY_SIZE(tlv320aic23_snd_controls));
tlv320aic23_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_ENUM("ADC HPF Cut-off", aic3x_enum[ADC_HPF_ENUM]),
};
-/* add non dapm controls */
-static int aic3x_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(aic3x_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&aic3x_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Left DAC Mux */
static const struct snd_kcontrol_new aic3x_left_dac_mux_controls =
SOC_DAPM_ENUM("Route", aic3x_enum[LDAC_ENUM]);
aic3x_write(codec, AIC3X_GPIO1_REG, (setup->gpio_func[0] & 0xf) << 4);
aic3x_write(codec, AIC3X_GPIO2_REG, (setup->gpio_func[1] & 0xf) << 4);
- aic3x_add_controls(codec);
+ snd_soc_add_controls(codec, aic3x_snd_controls,
+ ARRAY_SIZE(aic3x_snd_controls));
aic3x_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
0, 3, 5, 0, input_gain_tlv),
};
-/* add non dapm controls */
-static int twl4030_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&twl4030_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
/* Left channel inputs */
SND_SOC_DAPM_INPUT("MAINMIC"),
/* power on device */
twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- twl4030_add_controls(codec);
+ snd_soc_add_controls(codec, twl4030_snd_controls,
+ ARRAY_SIZE(twl4030_snd_controls));
twl4030_add_widgets(codec);
ret = snd_soc_init_card(socdev);
SOC_SINGLE("DC Filter Enable Switch", UDA134X_STATUS0, 0, 1, 0),
};
-static int uda134x_add_controls(struct snd_soc_codec *codec)
-{
- int err, i, n;
- const struct snd_kcontrol_new *ctrls;
- struct uda134x_platform_data *pd = codec->control_data;
-
- switch (pd->model) {
- case UDA134X_UDA1340:
- case UDA134X_UDA1344:
- n = ARRAY_SIZE(uda1340_snd_controls);
- ctrls = uda1340_snd_controls;
- break;
- case UDA134X_UDA1341:
- n = ARRAY_SIZE(uda1341_snd_controls);
- ctrls = uda1341_snd_controls;
- break;
- default:
- printk(KERN_ERR "%s unkown codec type: %d",
- __func__, pd->model);
- return -EINVAL;
- }
-
- for (i = 0; i < n; i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&ctrls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
struct snd_soc_dai uda134x_dai = {
.name = "UDA134X",
/* playback capabilities */
goto pcm_err;
}
- ret = uda134x_add_controls(codec);
+ switch (pd->model) {
+ case UDA134X_UDA1340:
+ case UDA134X_UDA1344:
+ ret = snd_soc_add_controls(codec, uda1340_snd_controls,
+ ARRAY_SIZE(uda1340_snd_controls));
+ break;
+ case UDA134X_UDA1341:
+ ret = snd_soc_add_controls(codec, uda1341_snd_controls,
+ ARRAY_SIZE(uda1341_snd_controls));
+ break;
+ default:
+ printk(KERN_ERR "%s unkown codec type: %d",
+ __func__, pd->model);
+ return -EINVAL;
+ }
+
if (ret < 0) {
printk(KERN_ERR "UDA134X: failed to register controls\n");
goto pcm_err;
SOC_SINGLE("AGC Switch", UDA1380_AGC, 0, 1, 0),
};
-/* add non dapm controls */
-static int uda1380_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(uda1380_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&uda1380_snd_controls[i], codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Input mux */
static const struct snd_kcontrol_new uda1380_input_mux_control =
SOC_DAPM_ENUM("Route", uda1380_input_sel_enum);
}
/* uda1380 init */
- uda1380_add_controls(codec);
+ snd_soc_add_controls(codec, uda1380_snd_controls,
+ ARRAY_SIZE(uda1380_snd_controls));
uda1380_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
u16 mute;
};
+struct wm8350_jack_data {
+ struct snd_soc_jack *jack;
+ int report;
+};
+
struct wm8350_data {
struct snd_soc_codec codec;
struct wm8350_output out1;
struct wm8350_output out2;
+ struct wm8350_jack_data hpl;
+ struct wm8350_jack_data hpr;
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
};
{"Beep", NULL, "IN3R PGA"},
};
-static int wm8350_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8350_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8350_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static int wm8350_add_widgets(struct snd_soc_codec *codec)
{
int ret;
return 0;
}
+static void wm8350_hp_jack_handler(struct wm8350 *wm8350, int irq, void *data)
+{
+ struct wm8350_data *priv = data;
+ u16 reg;
+ int report;
+ int mask;
+ struct wm8350_jack_data *jack = NULL;
+
+ switch (irq) {
+ case WM8350_IRQ_CODEC_JCK_DET_L:
+ jack = &priv->hpl;
+ mask = WM8350_JACK_L_LVL;
+ break;
+
+ case WM8350_IRQ_CODEC_JCK_DET_R:
+ jack = &priv->hpr;
+ mask = WM8350_JACK_R_LVL;
+ break;
+
+ default:
+ BUG();
+ }
+
+ if (!jack->jack) {
+ dev_warn(wm8350->dev, "Jack interrupt called with no jack\n");
+ return;
+ }
+
+ /* Debounce */
+ msleep(200);
+
+ reg = wm8350_reg_read(wm8350, WM8350_JACK_PIN_STATUS);
+ if (reg & mask)
+ report = jack->report;
+ else
+ report = 0;
+
+ snd_soc_jack_report(jack->jack, report, jack->report);
+}
+
+/**
+ * wm8350_hp_jack_detect - Enable headphone jack detection.
+ *
+ * @codec: WM8350 codec
+ * @which: left or right jack detect signal
+ * @jack: jack to report detection events on
+ * @report: value to report
+ *
+ * Enables the headphone jack detection of the WM8350.
+ */
+int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which,
+ struct snd_soc_jack *jack, int report)
+{
+ struct wm8350_data *priv = codec->private_data;
+ struct wm8350 *wm8350 = codec->control_data;
+ int irq;
+ int ena;
+
+ switch (which) {
+ case WM8350_JDL:
+ priv->hpl.jack = jack;
+ priv->hpl.report = report;
+ irq = WM8350_IRQ_CODEC_JCK_DET_L;
+ ena = WM8350_JDL_ENA;
+ break;
+
+ case WM8350_JDR:
+ priv->hpr.jack = jack;
+ priv->hpr.report = report;
+ irq = WM8350_IRQ_CODEC_JCK_DET_R;
+ ena = WM8350_JDR_ENA;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_TOCLK_ENA);
+ wm8350_set_bits(wm8350, WM8350_JACK_DETECT, ena);
+
+ /* Sync status */
+ wm8350_hp_jack_handler(wm8350, irq, priv);
+
+ wm8350_unmask_irq(wm8350, irq);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(wm8350_hp_jack_detect);
+
static struct snd_soc_codec *wm8350_codec;
static int wm8350_probe(struct platform_device *pdev)
wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
+ wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L);
+ wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R);
+ wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L,
+ wm8350_hp_jack_handler, priv);
+ wm8350_register_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R,
+ wm8350_hp_jack_handler, priv);
+
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
dev_err(&pdev->dev, "failed to create pcms\n");
return ret;
}
- wm8350_add_controls(codec);
+ snd_soc_add_controls(codec, wm8350_snd_controls,
+ ARRAY_SIZE(wm8350_snd_controls));
wm8350_add_widgets(codec);
wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
struct wm8350 *wm8350 = codec->control_data;
+ struct wm8350_data *priv = codec->private_data;
int ret;
+ wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
+ WM8350_JDL_ENA | WM8350_JDR_ENA);
+ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_TOCLK_ENA);
+
+ wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L);
+ wm8350_mask_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_L);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CODEC_JCK_DET_R);
+
+ priv->hpl.jack = NULL;
+ priv->hpr.jack = NULL;
+
/* cancel any work waiting to be queued. */
ret = cancel_delayed_work(&codec->delayed_work);
extern struct snd_soc_dai wm8350_dai;
extern struct snd_soc_codec_device soc_codec_dev_wm8350;
+enum wm8350_jack {
+ WM8350_JDL = 1,
+ WM8350_JDR = 2,
+};
+
+int wm8350_hp_jack_detect(struct snd_soc_codec *codec, enum wm8350_jack which,
+ struct snd_soc_jack *jack, int report);
+
#endif
SOC_SINGLE("Mono Playback Switch", WM8510_MONOMIX, 6, 1, 1),
};
-/* add non dapm controls */
-static int wm8510_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8510_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8510_snd_controls[i], codec,
- NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Speaker Output Mixer */
static const struct snd_kcontrol_new wm8510_speaker_mixer_controls[] = {
SOC_DAPM_SINGLE("Line Bypass Switch", WM8510_SPKMIX, 1, 1, 0),
/* power on device */
codec->bias_level = SND_SOC_BIAS_OFF;
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- wm8510_add_controls(codec);
+ snd_soc_add_controls(codec, wm8510_snd_controls,
+ ARRAY_SIZE(wm8510_snd_controls));
wm8510_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_SINGLE("ADC High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
};
-/* Add non-DAPM controls */
-static int wm8580_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8580_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8580_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
goto pcm_err;
}
- wm8580_add_controls(codec);
+ snd_soc_add_controls(codec, wm8580_snd_controls,
+ ARRAY_SIZE(wm8580_snd_controls));
wm8580_add_widgets(codec);
ret = snd_soc_init_card(socdev);
SOC_SINGLE("Deemphasis", WM8728_DACCTL, 1, 1, 0),
};
-static int wm8728_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8728_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8728_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/*
* DAPM controls.
*/
/* power on device */
wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- wm8728_add_controls(codec);
+ snd_soc_add_controls(codec, wm8728_snd_controls,
+ ARRAY_SIZE(wm8728_snd_controls));
wm8728_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_ENUM("Playback De-emphasis", wm8731_enum[1]),
};
-/* add non dapm controls */
-static int wm8731_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8731_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8731_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
/* Output Mixer */
static const struct snd_kcontrol_new wm8731_output_mixer_controls[] = {
SOC_DAPM_SINGLE("Line Bypass Switch", WM8731_APANA, 3, 1, 0),
reg = wm8731_read_reg_cache(codec, WM8731_RINVOL);
wm8731_write(codec, WM8731_RINVOL, reg & ~0x0100);
- wm8731_add_controls(codec);
+ snd_soc_add_controls(codec, wm8731_snd_controls,
+ ARRAY_SIZE(wm8731_snd_controls));
wm8731_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
};
-/* add non dapm controls */
-static int wm8750_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8750_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8750_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/*
* DAPM Controls
*/
reg = wm8750_read_reg_cache(codec, WM8750_RINVOL);
wm8750_write(codec, WM8750_RINVOL, reg | 0x0100);
- wm8750_add_controls(codec);
+ snd_soc_add_controls(codec, wm8750_snd_controls,
+ ARRAY_SIZE(wm8750_snd_controls));
wm8750_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_ENUM("ROUT2 Phase", wm8753_enum[28]),
};
-/* add non dapm controls */
-static int wm8753_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8753_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8753_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/*
* _DAPM_ Controls
*/
reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
- wm8753_add_controls(codec);
+ snd_soc_add_controls(codec, wm8753_snd_controls,
+ ARRAY_SIZE(wm8753_snd_controls));
wm8753_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
};
-/* add non dapm controls */
-static int wm8900_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8900_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8900_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static const struct snd_kcontrol_new wm8900_dapm_loutput2_control =
SOC_DAPM_SINGLE("LINEOUT2L Switch", WM8900_REG_POWER3, 6, 1, 0);
goto pcm_err;
}
- wm8900_add_controls(codec);
+ snd_soc_add_controls(codec, wm8900_snd_controls,
+ ARRAY_SIZE(wm8900_snd_controls));
wm8900_add_widgets(codec);
ret = snd_soc_init_card(socdev);
0, 63, 0, out_tlv),
};
-static int wm8903_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8903_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8903_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
-
- return 0;
-}
-
static const struct snd_kcontrol_new linput_mode_mux =
SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
goto err;
}
- wm8903_add_controls(socdev->codec);
+ snd_soc_add_controls(socdev->codec, wm8903_snd_controls,
+ ARRAY_SIZE(wm8903_snd_controls));
wm8903_add_widgets(socdev->codec);
ret = snd_soc_init_card(socdev);
SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
};
-/* add non-DAPM controls */
-static int wm8971_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8971_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8971_snd_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/*
* DAPM Controls
*/
reg = wm8971_read_reg_cache(codec, WM8971_RINVOL);
wm8971_write(codec, WM8971_RINVOL, reg | 0x0100);
- wm8971_add_controls(codec);
+ snd_soc_add_controls(codec, wm8971_snd_controls,
+ ARRAY_SIZE(wm8971_snd_controls));
wm8971_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
};
-/* add non dapm controls */
-static int wm8990_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm8990_snd_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm8990_snd_controls[i], codec,
- NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/*
* _DAPM_ Controls
*/
wm8990_write(codec, WM8990_LEFT_OUTPUT_VOLUME, 0x50 | (1<<8));
wm8990_write(codec, WM8990_RIGHT_OUTPUT_VOLUME, 0x50 | (1<<8));
- wm8990_add_controls(codec);
+ snd_soc_add_controls(codec, wm8990_snd_controls,
+ ARRAY_SIZE(wm8990_snd_controls));
wm8990_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_SINGLE("Mic 20dB Boost Switch", AC97_MIC, 7, 1, 0),
};
-/* add non dapm controls */
-static int wm9712_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm9712_snd_ac97_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm9712_snd_ac97_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/* We have to create a fake left and right HP mixers because
* the codec only has a single control that is shared by both channels.
* This makes it impossible to determine the audio path.
ac97_write(codec, AC97_VIDEO, ac97_read(codec, AC97_VIDEO) | 0x3000);
wm9712_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
- wm9712_add_controls(codec);
+ snd_soc_add_controls(codec, wm9712_snd_ac97_controls,
+ ARRAY_SIZE(wm9712_snd_ac97_controls));
wm9712_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
SOC_SINGLE("3D Depth", AC97_REC_GAIN_MIC, 0, 15, 1),
};
-/* add non dapm controls */
-static int wm9713_add_controls(struct snd_soc_codec *codec)
-{
- int err, i;
-
- for (i = 0; i < ARRAY_SIZE(wm9713_snd_ac97_controls); i++) {
- err = snd_ctl_add(codec->card,
- snd_soc_cnew(&wm9713_snd_ac97_controls[i],
- codec, NULL));
- if (err < 0)
- return err;
- }
- return 0;
-}
-
/* We have to create a fake left and right HP mixers because
* the codec only has a single control that is shared by both channels.
* This makes it impossible to determine the audio path using the current
reg = ac97_read(codec, AC97_CD) & 0x7fff;
ac97_write(codec, AC97_CD, reg);
- wm9713_add_controls(codec);
+ snd_soc_add_controls(codec, wm9713_snd_ac97_controls,
+ ARRAY_SIZE(wm9713_snd_ac97_controls));
wm9713_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0)
}
EXPORT_SYMBOL_GPL(snd_soc_cnew);
+/**
+ * snd_soc_add_controls - add an array of controls to a codec.
+ * Convienience function to add a list of controls. Many codecs were
+ * duplicating this code.
+ *
+ * @codec: codec to add controls to
+ * @controls: array of controls to add
+ * @num_controls: number of elements in the array
+ *
+ * Return 0 for success, else error.
+ */
+int snd_soc_add_controls(struct snd_soc_codec *codec,
+ const struct snd_kcontrol_new *controls, int num_controls)
+{
+ struct snd_card *card = codec->card;
+ int err, i;
+
+ for (i = 0; i < num_controls; i++) {
+ const struct snd_kcontrol_new *control = &controls[i];
+ err = snd_ctl_add(card, snd_soc_cnew(control, codec, NULL));
+ if (err < 0) {
+ dev_err(codec->dev, "%s: Failed to add %s\n",
+ codec->name, control->name);
+ return err;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_add_controls);
+
/**
* snd_soc_info_enum_double - enumerated double mixer info callback
* @kcontrol: mixer control
static int dapm_up_seq[] = {
snd_soc_dapm_pre, snd_soc_dapm_micbias, snd_soc_dapm_mic,
snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_dac,
- snd_soc_dapm_mixer, snd_soc_dapm_pga, snd_soc_dapm_adc, snd_soc_dapm_hp,
- snd_soc_dapm_spk, snd_soc_dapm_post
+ snd_soc_dapm_mixer, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_pga,
+ snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk, snd_soc_dapm_post
};
+
static int dapm_down_seq[] = {
snd_soc_dapm_pre, snd_soc_dapm_adc, snd_soc_dapm_hp, snd_soc_dapm_spk,
- snd_soc_dapm_pga, snd_soc_dapm_mixer, snd_soc_dapm_dac, snd_soc_dapm_mic,
- snd_soc_dapm_micbias, snd_soc_dapm_mux, snd_soc_dapm_value_mux,
- snd_soc_dapm_post
+ snd_soc_dapm_pga, snd_soc_dapm_mixer_named_ctl, snd_soc_dapm_mixer,
+ snd_soc_dapm_dac, snd_soc_dapm_mic, snd_soc_dapm_micbias,
+ snd_soc_dapm_mux, snd_soc_dapm_value_mux, snd_soc_dapm_post
};
static int dapm_status = 1;
{
switch (w->id) {
case snd_soc_dapm_switch:
- case snd_soc_dapm_mixer: {
+ case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl: {
int val;
struct soc_mixer_control *mc = (struct soc_mixer_control *)
w->kcontrols[i].private_value;
if (path->name != (char*)w->kcontrols[i].name)
continue;
- /* add dapm control with long name */
- name_len = 2 + strlen(w->name)
- + strlen(w->kcontrols[i].name);
+ /* add dapm control with long name.
+ * for dapm_mixer this is the concatenation of the
+ * mixer and kcontrol name.
+ * for dapm_mixer_named_ctl this is simply the
+ * kcontrol name.
+ */
+ name_len = strlen(w->kcontrols[i].name) + 1;
+ if (w->id == snd_soc_dapm_mixer)
+ name_len += 1 + strlen(w->name);
+
path->long_name = kmalloc(name_len, GFP_KERNEL);
+
if (path->long_name == NULL)
return -ENOMEM;
- snprintf(path->long_name, name_len, "%s %s",
- w->name, w->kcontrols[i].name);
+ switch (w->id) {
+ case snd_soc_dapm_mixer:
+ default:
+ snprintf(path->long_name, name_len, "%s %s",
+ w->name, w->kcontrols[i].name);
+ break;
+ case snd_soc_dapm_mixer_named_ctl:
+ snprintf(path->long_name, name_len, "%s",
+ w->kcontrols[i].name);
+ break;
+ }
+
path->long_name[name_len - 1] = '\0';
path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w,
case snd_soc_dapm_adc:
case snd_soc_dapm_pga:
case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
if (w->name) {
in = is_connected_input_ep(w);
dapm_clear_walk(w->codec);
int found = 0;
if (widget->id != snd_soc_dapm_mixer &&
+ widget->id != snd_soc_dapm_mixer_named_ctl &&
widget->id != snd_soc_dapm_switch)
return -ENODEV;
case snd_soc_dapm_adc:
case snd_soc_dapm_pga:
case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
if (w->name)
count += sprintf(buf + count, "%s: %s\n",
w->name, w->power ? "On":"Off");
}
static int snd_soc_dapm_set_pin(struct snd_soc_codec *codec,
- char *pin, int status)
+ const char *pin, int status)
{
struct snd_soc_dapm_widget *w;
break;
case snd_soc_dapm_switch:
case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
ret = dapm_connect_mixer(codec, wsource, wsink, path, control);
if (ret != 0)
goto err;
switch(w->id) {
case snd_soc_dapm_switch:
case snd_soc_dapm_mixer:
+ case snd_soc_dapm_mixer_named_ctl:
dapm_new_mixer(codec, w);
break;
case snd_soc_dapm_mux:
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
* do any widget power switching.
*/
-int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, char *pin)
+int snd_soc_dapm_enable_pin(struct snd_soc_codec *codec, const char *pin)
{
return snd_soc_dapm_set_pin(codec, pin, 1);
}
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
* do any widget power switching.
*/
-int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, char *pin)
+int snd_soc_dapm_disable_pin(struct snd_soc_codec *codec, const char *pin)
{
return snd_soc_dapm_set_pin(codec, pin, 0);
}
* NOTE: snd_soc_dapm_sync() needs to be called after this for DAPM to
* do any widget power switching.
*/
-int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, char *pin)
+int snd_soc_dapm_nc_pin(struct snd_soc_codec *codec, const char *pin)
{
return snd_soc_dapm_set_pin(codec, pin, 0);
}
*
* Returns 1 for connected otherwise 0.
*/
-int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, char *pin)
+int snd_soc_dapm_get_pin_status(struct snd_soc_codec *codec, const char *pin)
{
struct snd_soc_dapm_widget *w;
--- /dev/null
+/*
+ * soc-jack.c -- ALSA SoC jack handling
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <sound/jack.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+/**
+ * snd_soc_jack_new - Create a new jack
+ * @card: ASoC card
+ * @id: an identifying string for this jack
+ * @type: a bitmask of enum snd_jack_type values that can be detected by
+ * this jack
+ * @jack: structure to use for the jack
+ *
+ * Creates a new jack object.
+ *
+ * Returns zero if successful, or a negative error code on failure.
+ * On success jack will be initialised.
+ */
+int snd_soc_jack_new(struct snd_soc_card *card, const char *id, int type,
+ struct snd_soc_jack *jack)
+{
+ jack->card = card;
+ INIT_LIST_HEAD(&jack->pins);
+
+ return snd_jack_new(card->socdev->codec->card, id, type, &jack->jack);
+}
+EXPORT_SYMBOL_GPL(snd_soc_jack_new);
+
+/**
+ * snd_soc_jack_report - Report the current status for a jack
+ *
+ * @jack: the jack
+ * @status: a bitmask of enum snd_jack_type values that are currently detected.
+ * @mask: a bitmask of enum snd_jack_type values that being reported.
+ *
+ * If configured using snd_soc_jack_add_pins() then the associated
+ * DAPM pins will be enabled or disabled as appropriate and DAPM
+ * synchronised.
+ *
+ * Note: This function uses mutexes and should be called from a
+ * context which can sleep (such as a workqueue).
+ */
+void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
+{
+ struct snd_soc_codec *codec = jack->card->socdev->codec;
+ struct snd_soc_jack_pin *pin;
+ int enable;
+ int oldstatus;
+
+ if (!jack) {
+ WARN_ON_ONCE(!jack);
+ return;
+ }
+
+ mutex_lock(&codec->mutex);
+
+ oldstatus = jack->status;
+
+ jack->status &= ~mask;
+ jack->status |= status;
+
+ /* The DAPM sync is expensive enough to be worth skipping */
+ if (jack->status == oldstatus)
+ goto out;
+
+ list_for_each_entry(pin, &jack->pins, list) {
+ enable = pin->mask & status;
+
+ if (pin->invert)
+ enable = !enable;
+
+ if (enable)
+ snd_soc_dapm_enable_pin(codec, pin->pin);
+ else
+ snd_soc_dapm_disable_pin(codec, pin->pin);
+ }
+
+ snd_soc_dapm_sync(codec);
+
+ snd_jack_report(jack->jack, status);
+
+out:
+ mutex_unlock(&codec->mutex);
+}
+EXPORT_SYMBOL_GPL(snd_soc_jack_report);
+
+/**
+ * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
+ *
+ * @jack: ASoC jack
+ * @count: Number of pins
+ * @pins: Array of pins
+ *
+ * After this function has been called the DAPM pins specified in the
+ * pins array will have their status updated to reflect the current
+ * state of the jack whenever the jack status is updated.
+ */
+int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
+ struct snd_soc_jack_pin *pins)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (!pins[i].pin) {
+ printk(KERN_ERR "No name for pin %d\n", i);
+ return -EINVAL;
+ }
+ if (!pins[i].mask) {
+ printk(KERN_ERR "No mask for pin %d (%s)\n", i,
+ pins[i].pin);
+ return -EINVAL;
+ }
+
+ INIT_LIST_HEAD(&pins[i].list);
+ list_add(&(pins[i].list), &jack->pins);
+ }
+
+ /* Update to reflect the last reported status; canned jack
+ * implementations are likely to set their state before the
+ * card has an opportunity to associate pins.
+ */
+ snd_soc_jack_report(jack, 0, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins);
projects / linux-2.6-omap-h63xx.git / commitdiff