Convert files within the Documentation directory to UTF-8.
Adrian Bunk:
small additional fixes
Signed-off-by: John Anthony Kazos Jr. <jakj@j-a-k-j.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
http://handhelds.org/moin/moin.cgi/HpIpaqH1940
- Herbert Pötzl pages:
+ Herbert Pötzl pages:
http://vserver.13thfloor.at/H1940/
-----------
This project is being maintained and developed by a variety
- of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
+ of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
Thanks to the many others who have also provided support.
Ground (18)---[GND] [+5v]---(19) LED +
Ground (19)---[GND]
Ground (20)---[GND] E A Values:
-Ground (21)---[GND] [GND]---[P1]---(18) Vee · R = Resistor = 22 ohm
-Ground (22)---[GND] | · P1 = Preset = 10 Kohm
-Ground (23)---[GND] ---- S ------( 3) V0 · P2 = Preset = 1 Kohm
+Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm
+Ground (22)---[GND] | - P1 = Preset = 10 Kohm
+Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm
Ground (24)---[GND] | |
Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
There is a web page about binfmt_misc at
http://www.tat.physik.uni-tuebingen.de/~rguenth/linux/binfmt_misc.html
-Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
+Richard Günther <rguenth@tat.physik.uni-tuebingen.de>
and;
Nettle (http://www.lysator.liu.se/~nisse/nettle/)
- Niels Möller
+ Niels Möller
Original developers of the crypto algorithms:
DES algorithm contributors:
Raimar Falke
- Gisle Sælensminde
- Niels Möller
+ Gisle Sælensminde
+ Niels Möller
Blowfish algorithm contributors:
Herbert Valerio Riedel
Ulf Hermenau for helping me out with traditional chinese.
- André Smoktun and Christian Frömmel for supporting me with
+ André Smoktun and Christian Frömmel for supporting me with
hardware and listening to my problems very patiently.
Andreas 'randy' Weinberger
for the support of the Fujitsu-Siemens Activy budget DVB-S
-Kenneth Aafløy <ke-aa@frisurf.no>
+Kenneth Aafløy <ke-aa@frisurf.no>
for adding support for Typhoon DVB-S budget card
Ernst Peinlich <e.peinlich@inode.at>
vsync length.
+----------+---------------------------------------------+----------+-------+
- | | ^ | | |
+ | | ↑ | | |
| | |upper_margin | | |
- | | ¥ | | |
+ | | ↓ | | |
+----------###############################################----------+-------+
- | # ^ # | |
+ | # ↑ # | |
| # | # | |
| # | # | |
| # | # | |
| # | # | |
| # | # | |
| # | # | |
- | # ¥ # | |
+ | # ↓ # | |
+----------###############################################----------+-------+
- | | ^ | | |
+ | | ↑ | | |
| | |lower_margin | | |
- | | ¥ | | |
+ | | ↓ | | |
+----------+---------------------------------------------+----------+-------+
- | | ^ | | |
+ | | ↑ | | |
| | |vsync_len | | |
- | | ¥ | | |
+ | | ↓ | | |
+----------+---------------------------------------------+----------+-------+
The frame buffer device expects all horizontal timings in number of dotclocks
Introduction
This is a frame buffer device driver for 3dfx' Voodoo Graphics
- (aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based
+ (aka voodoo 1, aka sst1) and Voodoo² (aka Voodoo 2, aka CVG) based
video boards. It's highly experimental code, but is guaranteed to work
- on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
+ on my computer, with my "Maxi Gamer 3D" and "Maxi Gamer 3d²" boards,
and with me "between chair and keyboard". Some people tested other
combinations and it seems that it works.
The main page is located at <http://sstfb.sourceforge.net>, and if
used to control fan speed. Usually only one of these two outputs will be
used. Write the minimum PWM or DAC value to the appropriate control
register. Then set the low temperature limit in the tmin values for each
-temperature sensor. The range of control is fixed at 20 °C, and the
+temperature sensor. The range of control is fixed at 20 °C, and the
largest difference between current and tmin of the temperature sensors sets
the control output. See the datasheet for several example circuits for
controlling fan speed with the PWM and DAC outputs. The fan speed sensors
Authors:
Frodo Looijaard <frodol@dds.nl>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>
+ Kyösti Mälkki <kmalkki@cc.hut.fi>
Hong-Gunn Chew <hglinux@gunnet.org>
Jean Delvare <khali@linux-fr.org>
The LM82 is confirmed to have been found on most AMD Geode reference
designs and test platforms.
-The driver has been successfully tested by Magnus Forsström, who I'd
+The driver has been successfully tested by Magnus Forsström, who I'd
like to thank here. More testers will be of course welcome.
The fact that the LM83 is only scarcely used can be easily explained.
Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
Authors:
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Aurelien Jarno <aurelien@aurel32.net> 2.6 port
Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
Authors:
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Bob Dougherty <bobd@stanford.edu>
(Some conversion-factor data were contributed by
by CR[0x49h].
- The function of vid and vrm has not been finished, because I'm NOT
very familiar with them. Adding support is welcome.
- - The function of chassis open detection needs more tests.
+ - The function of chassis open detection needs more tests.
- If you have ASUS server board and chip was not found: Then you will
need to upgrade to latest (or beta) BIOS. If it does not help please
contact us.
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
Ralph Metzler <rjkm@thp.uni-koeln.de>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
- design hints and bug fixes
Alexander Maylsh <amalysh@web.de>
- ditto, plus an important datasheet... almost the one I really wanted
-Hans-Günter Lütke Uphues <hg_lu@t-online.de>
+Hans-Günter Lütke Uphues <hg_lu@t-online.de>
- patch for SiS735
Robert Zwerus <arzie@dds.nl>
- testing for SiS645DX
* VIA Technologies, InC. VT82C586B
Datasheet: Publicly available at the VIA website
-Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
+Author: Kyösti Mälkki <kmalkki@cc.hut.fi>
Description
-----------
Datasheet: available on request and under NDA from VIA
Authors:
- Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ Kyösti Mälkki <kmalkki@cc.hut.fi>,
Mark D. Studebaker <mdsxyz123@yahoo.com>,
Jean Delvare <khali@linux-fr.org>
Flags I2C_M_IGNORE_NAK
Normally message is interrupted immediately if there is [NA] from the
- client. Setting this flag treats any [NA] as [A], and all of
+ client. Setting this flag treats any [NA] as [A], and all of
message is sent.
These messages may still fail to SCL lo->hi timeout.
Bug fixes
Core code extensions
-Auvo Häkkinen, University of Helsinki Finland
+Auvo Häkkinen, University of Helsinki Finland
LAN OSM code
/Proc interface to LAN class
Bug fixes
Core code extensions
-Taneli Vähäkangas, University of Helsinki Finland
+Taneli Vähäkangas, University of Helsinki Finland
Fixes to i2o_config
CREDITS
I want to thank all who contributed to this project and especially to:
(in alphabetical order)
-Thomas Bogendörfer (tsbogend@bigbug.franken.de)
+Thomas Bogendörfer (tsbogend@bigbug.franken.de)
Tester, lots of bugfixes and hints.
Alan Cox (alan@redhat.com)
Henner Eisen (eis@baty.hanse.de)
For X.25 implementation.
-Volker Götz (volker@oops.franken.de)
+Volker Götz (volker@oops.franken.de)
For contribution of man-pages, the imontty-tool and a perfect
maintaining of the mailing-list at hub-wue.
the script tools/tcltk/isdnmon. You can add actions for line-status
changes. See the comments at the beginning of the script for how to
do that. There are other tty-based tools in the tools-subdirectory
- contributed by Michael Knigge (imon), Volker Götz (imontty) and
+ contributed by Michael Knigge (imon), Volker Götz (imontty) and
Andreas Kool (isdnmon).
l) For initial testing, you can set the verbose-level to 2 (default: 0).
You can get the ICN-ISDN-card from:
Thinking Objects Software GmbH
-Versbacher Röthe 159
-97078 Würzburg
+Versbacher Röthe 159
+97078 Würzburg
Tel: +49 931 2877950
Fax: +49 931 2877951
originally by Brian A. Lantz, brian@lantz.com
-heavily edited for binfmt_misc by Richard Günther
+heavily edited for binfmt_misc by Richard Günther
new scripts by Colin J. Watson <cjw44@cam.ac.uk>
added executable Jar file support by Kurt Huwig <kurt@iku-netz.de>
* Title: "Design and Implementation of the Second Extended
Filesystem"
- Author: Rémy Card, Theodore Ts'o, Stephen Tweedie.
+ Author: Rémy Card, Theodore Ts'o, Stephen Tweedie.
URL: http://web.mit.edu/tytso/www/linux/ext2intro.html
Keywords: ext2, linux fs history, inode, directory, link, devices,
VFS, physical structure, performance, benchmarks, ext2fs library,
the third IDE port are going into data's Nirwana on the
Buddha.
- Jens Schönfeld february 19th, 1997
+ Jens Schönfeld february 19th, 1997
updated may 27th, 1997
eMail: sysop@nostlgic.tng.oche.de
This is the 6pack-mini-HOWTO, written by
-Andreas Könsgen DG3KQ
+Andreas Könsgen DG3KQ
Internet: ajk@iehk.rwth-aachen.de
AMPR-net: dg3kq@db0pra.ampr.org
AX.25: dg3kq@db0ach.#nrw.deu.eu
Please send me your comments to
- Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
+ Ulisses Alonso Camaró <uaca@i.hate.spam.alumni.uv.es>
-------------------------------------------------------------------------------
+ Why use PACKET_MMAP
SliceCOM adapter felhasznaloi dokumentacioja - 0.51 verziohoz
-Bartók István <bartoki@itc.hu>
+Bartók István <bartoki@itc.hu>
Utolso modositas: Wed Aug 29 17:26:58 CEST 2001
-----------------------------------------------------------------
SliceCOM adapter user's documentation - for the 0.51 driver version
-Written by Bartók István <bartoki@itc.hu>
+Written by Bartók István <bartoki@itc.hu>
-English translation: Lakatos György <gyuri@itc.hu>
+English translation: Lakatos György <gyuri@itc.hu>
Mon Dec 11 15:28:42 CET 2000
Last modified: Wed Aug 29 17:25:37 CEST 2001
CHAPTER 1 LOCATION OF DIP-SWITCH
==============================================================
-UÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
-þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ
-þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ
-þUÄÄÄÄÄÄ¿ þ þ þ þ UÄÄÅ¿
-þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ
-þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU
-þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ
-þUÄÄÄÄÄÄ¿ þ þ AÄÄÄU AÄ¿
-þAÄÄÄÄÄÄU þ þ þ þ
-þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ
-þ þ þ
-þ AÄU
-þ þ
-þ þ
-þ þ
-þ þ
-AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
- AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
+UÃ\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84Ã\84¿
+þUÄÄÄÄÄÄ¿ UÄÄÄÄÄ¿ UÄÄÄ¿ þ
+þAÄÄÄÄÄÄU W1 AÄÄÄÄÄU UÄÄÄÄ¿ þ þ þ
+þUÃ\84Ã\84Ã\84Ã\84Ã\84Ã\84¿ þ þ þ þ UÃ\84Ã\84Ã\85¿
+þAÄÄÄÄÄÄU UÄÄÄÄÄÄÄÄÄÄÄ¿ AÄÄÄÄU þ þ þ þþ
+þUÄÄÄÄÄÄ¿ þ þ UÄÄÄ¿ AÄÄÄU AÄÄÅU
+þAÄÄÄÄÄÄU þ TMS380C26 þ þ þ þ
+þUÃ\84Ã\84Ã\84Ã\84Ã\84Ã\84¿ þ þ AÃ\84Ã\84Ã\84U AÃ\84¿
+þAÄÄÄÄÄÄU þ þ þ þ
+þ AÄÄÄÄÄÄÄÄÄÄÄU þ þ
+þ þ þ
+þ AÄU
+þ þ
+þ þ
+þ þ
+þ þ
+AÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄAÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄAÄÄÄÄÄÄÄÄÄU
+ AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU AÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄU
==============================================================
CHAPTER 2 DEFAULT SETTINGS
CHAPTER 3 DIP SWITCH W1 DESCRIPTION
==============================================================
- UÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄ¿ ON
- þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
- AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF
+ UÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84AÃ\84Ã\84Ã\84¿ ON
+ þ 1 þ 2 þ 3 þ 4 þ 5 þ 6 þ 7 þ 8 þ
+ AÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄAÄÄÄU OFF
|AD | BootROM Addr. | I/O |
+-+-+-------+-------+-----+-----+
| | |
well as how to enable the drivers of endpoint devices to conform with
PCI Express AER driver.
-1.2 Copyright © Intel Corporation 2006.
+1.2 Copyright © Intel Corporation 2006.
1.3 What is the PCI Express AER Driver?
Article about goals and implementation of Software Suspend for Linux
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-Author: G\82ábor Kuti
+Author: G\82ábor Kuti
Last revised: 2003-10-20 by Pavel Machek
Idea and goals to achieve
#3 0x5167e6 in readline_internal_char () at readline.c:454
#4 0x5168ee in readline_internal_charloop () at readline.c:507
#5 0x51692c in readline_internal () at readline.c:521
-#6 0x5164fe in readline (prompt=0x7ffff810 "\177\81ÿ\81øx\177\81ÿ\81÷\81Ø\177\81ÿ\81øx\81À")
+#6 0x5164fe in readline (prompt=0x7ffff810 "\177\81ÿ\81øx\177\81ÿ\81÷\81Ø\177\81ÿ\81øx\81À")
at readline.c:349
#7 0x4d7a8a in command_line_input (prrompt=0x564420 "(gdb) ", repeat=1,
annotation_suffix=0x4d6b44 "prompt") at top.c:2091
$Id: README.aha152x,v 1.2 1999/12/25 15:32:30 fischer Exp fischer $
Adaptec AHA-1520/1522 SCSI driver for Linux (aha152x)
-Copyright 1993-1999 Jürgen Fischer <fischer@norbit.de>
+Copyright 1993-1999 Jürgen Fischer <fischer@norbit.de>
TC1550 patches by Luuk van Dijk (ldz@xs4all.nl)
This file contains brief information about the SCSI tape driver.
-The driver is currently maintained by Kai Mäkisara (email
+The driver is currently maintained by Kai Mäkisara (email
Kai.Makisara@kolumbus.fi)
Last modified: Mon Mar 7 21:14:44 2005 by kai.makisara
all the others for the wonderful OS and software.
Thanks to C.L. Huang and Philip Giang (Tekram) for the initial driver
release and support.
-Thanks to Doug Ledford, Gérard Roudier for support with SCSI coding.
+Thanks to Doug Ledford, Gérard Roudier for support with SCSI coding.
Thanks to a lot of people (espec. Chiaki Ishikawa, Andreas Haumer, Hubert
Tonneau) for intensively testing the driver (and even risking data loss
doing this during early revisions).
Sony Programmable I/O Control Device Driver Readme
--------------------------------------------------
Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ Copyright (C) 2001-2002 Alcôve <www.alcove.com>
Copyright (C) 2001 Michael Ashley <m.ashley@unsw.edu.au>
Copyright (C) 2001 Junichi Morita <jun1m@mars.dti.ne.jp>
Copyright (C) 2000 Takaya Kinjo <t-kinjo@tc4.so-net.ne.jp>
Default=SBPRO
Reboot to Windows 95 and choose Linux. When booted, use sndconfig to configure
-the sound modules and voilà - ThinkPad sound with Linux.
+the sound modules and voilà - ThinkPad sound with Linux.
Now the gotchas - you can either have CD sound OR Mixers but not both. That's a
problem with the SB1.5 (CD sound) or SBPRO (Mixers) settings. No one knows why
will sell keyboards to some of the 3 million (at least)
Linux users.
- - Many thanks to ing büro h doran [http://www.ibhdoran.com]!
+ - Many thanks to ing büro h doran [http://www.ibhdoran.com]!
It was almost impossible to get a PC backplate USB connector
for the motherboard here at Europe (mine, home-made, was
quite lousy :). Now I know where to acquire nice USB stuff!
Connect Tech's Support Department at support@connecttech.com
-HandSpring Visor, Palm USB, and Clié USB driver
+HandSpring Visor, Palm USB, and Clié USB driver
- This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
+ This driver works with all HandSpring USB, Palm USB, and Sony Clié USB
devices.
Only when the device tries to connect to the host, will the device show
the port to use for the HotSync transfer. The "Generic" port can be used
for other device communication, such as a PPP link.
- For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
+ For some Sony Clié devices, /dev/ttyUSB0 must be used to talk to the
device. This is true for all OS version 3.5 devices, and most devices
that have had a flash upgrade to a newer version of the OS. See the
kernel system log for information on which is the correct port to use.
This driver is intended for the "Hauppauge WinTV PVR USB 2.0", which
is a USB 2.0 hosted TV Tuner. This driver is a work in progress.
- Its history started with the reverse-engineering effort by Björn
+ Its history started with the reverse-engineering effort by Björn
Danielsson <pvrusb2@dax.nu> whose web page can be found here:
http://pvrusb2.dax.nu/
Conexant bt866 TV encoder
is used in AVS6EYES, and
-can generate: NTSC/PAL, PALM, PALN
+can generate: NTSC/PAL, PALÂM, PALÂN
The adv717x, should be able to produce PAL N. But you find nothing PAL N
specific in the registers. Seem that you have to reuse a other standard
Vaio Picturebook Motion Eye Camera Driver Readme
------------------------------------------------
Copyright (C) 2001-2004 Stelian Pop <stelian@popies.net>
- Copyright (C) 2001-2002 Alcôve <www.alcove.com>
+ Copyright (C) 2001-2002 Alcôve <www.alcove.com>
Copyright (C) 2000 Andrew Tridgell <tridge@samba.org>
This driver enable the use of video4linux compatible applications with the
NAME: bandingfilter
TYPE: integer (Boolean)
DEFAULT: 0 (off)
- DESC: Enables the sensor´s banding filter exposure algorithm. This reduces
+ DESC: Enables the sensor´s banding filter exposure algorithm. This reduces
or stabilizes the "banding" caused by some artificial light sources
(especially fluorescent). You might have to set lightfreq correctly for
this to work right. As an added bonus, this sometimes makes it
- possible to capture your monitor´s output.
+ possible to capture your monitor´s output.
NAME: fastset
TYPE: integer (Boolean)
projects / linux-2.6-omap-h63xx.git / commitdiff