acpi.debug_level= [HW,ACPI]
Format: <int>
Each bit of the <int> indicates an ACPI debug level,
- 1: enable, 0: disable. It is useful for boot time
- debugging. After system has booted up, it can be set
- via /sys/module/acpi/parameters/debug_level.
- CONFIG_ACPI_DEBUG must be enabled for this to produce any output.
- Available bits (add the numbers together) to enable different
- debug output levels of the ACPI subsystem:
- 0x01 error 0x02 warn 0x04 init 0x08 debug object
- 0x10 info 0x20 init names 0x40 parse 0x80 load
- 0x100 dispatch 0x200 execute 0x400 names 0x800 operation region
- 0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects
- 0x10000 resources 0x20000 user requests 0x40000 package.
- The number can be in decimal or prefixed with 0x in hex.
- Warning: Many of these options can produce a lot of
- output and make your system unusable. Be very careful.
+ which corresponds to the level in an ACPI_DEBUG_PRINT
+ statement. After system has booted up, this mask
+ can be set via /sys/module/acpi/parameters/debug_level.
+
+ CONFIG_ACPI_DEBUG must be enabled for this to produce
+ any output. The number can be in decimal or prefixed
+ with 0x in hex. Some of these options produce so much
+ output that the system is unusable.
+
+ The following global components are defined by the
+ ACPI CA:
+ 0x01 error
+ 0x02 warn
+ 0x04 init
+ 0x08 debug object
+ 0x10 info
+ 0x20 init names
+ 0x40 parse
+ 0x80 load
+ 0x100 dispatch
+ 0x200 execute
+ 0x400 names
+ 0x800 operation region
+ 0x1000 bfield
+ 0x2000 tables
+ 0x4000 values
+ 0x8000 objects
+ 0x10000 resources
+ 0x20000 user requests
+ 0x40000 package
+ The number can be in decimal or prefixed with 0x in hex.
+ Warning: Many of these options can produce a lot of
+ output and make your system unusable. Be very careful.
+
+ acpi.power_nocheck= [HW,ACPI]
+ Format: 1/0 enable/disable the check of power state.
+ On some bogus BIOS the _PSC object/_STA object of
+ power resource can't return the correct device power
+ state. In such case it is unneccessary to check its
+ power state again in power transition.
+ 1 : disable the power state check
acpi_pm_good [X86-32,X86-64]
Override the pmtimer bug detection: force the kernel
Acer Laptop WMI Extras Driver
http://code.google.com/p/aceracpi
-Version 0.1
-9th February 2008
+Version 0.2
+18th August 2008
Copyright 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
ever wish to remove the card, or swap it out at some point, please get in touch
with me, as we may well be able to gain some data on wireless card detection.
-To read the status of the wireless radio (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the wireless radio:
-echo 1 > /sys/devices/platform/acer-wmi/wireless
-
-To disable the wireless radio:
-echo 0 > /sys/devices/platform/acer-wmi/wireless
-
-To set the state of the wireless radio when loading acer-wmi, pass:
-wireless=X (where X is 0 or 1)
+The wireless radio is exposed through rfkill.
Bluetooth
*********
module off the internet that is compatible with your laptop and fit it, then
it will work just fine with acer-wmi.
-To read the status of the bluetooth module (0=off, 1=on):
-cat /sys/devices/platform/acer-wmi/wireless
-
-To enable the bluetooth module:
-echo 1 > /sys/devices/platform/acer-wmi/bluetooth
-
-To disable the bluetooth module:
-echo 0 > /sys/devices/platform/acer-wmi/bluetooth
-
-To set the state of the bluetooth module when loading acer-wmi, pass:
-bluetooth=X (where X is 0 or 1)
+Bluetooth is exposed through rfkill.
3G
**
#endif
#define PFX "powernow-k8: "
-#define BFX PFX "BIOS error: "
#define VERSION "version 2.20.00"
#include "powernow-k8.h"
for (j = 0; j < data->numps; j++) {
if (pst[j].vid > LEAST_VID) {
- printk(KERN_ERR PFX "vid %d invalid : 0x%x\n", j, pst[j].vid);
+ printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
+ j, pst[j].vid);
return -EINVAL;
}
if (pst[j].vid < data->rvo) { /* vid + rvo >= 0 */
- printk(KERN_ERR BFX "0 vid exceeded with pstate %d\n", j);
+ printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
+ " %d\n", j);
return -ENODEV;
}
if (pst[j].vid < maxvid + data->rvo) { /* vid + rvo >= maxvid */
- printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
+ printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
+ " %d\n", j);
return -ENODEV;
}
if (pst[j].fid > MAX_FID) {
- printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+ printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
+ " %d\n", j);
return -ENODEV;
}
if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
/* Only first fid is allowed to be in "low" range */
- printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+ printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
+ "0x%x\n", j, pst[j].fid);
return -EINVAL;
}
if (pst[j].fid < lastfid)
lastfid = pst[j].fid;
}
if (lastfid & 1) {
- printk(KERN_ERR BFX "lastfid invalid\n");
+ printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
return -EINVAL;
}
if (lastfid > LO_FID_TABLE_TOP)
- printk(KERN_INFO BFX "first fid not from lo freq table\n");
+ printk(KERN_INFO FW_BUG PFX "first fid not from lo freq table\n");
return 0;
}
dprintk("table vers: 0x%x\n", psb->tableversion);
if (psb->tableversion != PSB_VERSION_1_4) {
- printk(KERN_ERR BFX "PSB table is not v1.4\n");
+ printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
return -ENODEV;
}
dprintk("flags: 0x%x\n", psb->flags1);
if (psb->flags1) {
- printk(KERN_ERR BFX "unknown flags\n");
+ printk(KERN_ERR FW_BUG PFX "unknown flags\n");
return -ENODEV;
}
}
}
if (cpst != 1) {
- printk(KERN_ERR BFX "numpst must be 1\n");
+ printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
return -ENODEV;
}
"ACPI Processor module before starting this "
"driver.\n");
#else
- printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
- "_PSS objects in a way that Linux understands. "
- "Please report this to the Linux ACPI maintainers"
- " and complain to your BIOS vendor.\n");
+ printk(KERN_ERR FW_BUG PFX "Your BIOS does not provide"
+ " ACPI _PSS objects in a way that Linux "
+ "understands. Please report this to the Linux "
+ "ACPI maintainers and complain to your BIOS "
+ "vendor.\n");
#endif
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
- "CPU0. Complain to your BIOS vendor.\n");
+ printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
+ "CPU other than CPU0. Complain to your BIOS "
+ "vendor.\n");
kfree(data);
return -ENODEV;
}
/* min/max the cpu is capable of */
if (cpufreq_frequency_table_cpuinfo(pol, data->powernow_table)) {
- printk(KERN_ERR PFX "invalid powernow_table\n");
+ printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
powernow_k8_cpu_exit_acpi(data);
kfree(data->powernow_table);
kfree(data);
#define STRUCT_TO_INT(s) (*((int*)&s))
+static int set_power_nocheck(const struct dmi_system_id *id)
+{
+ printk(KERN_NOTICE PREFIX "%s detected - "
+ "disable power check in power transistion\n", id->ident);
+ acpi_power_nocheck = 1;
+ return 0;
+}
+static struct dmi_system_id __cpuinitdata power_nocheck_dmi_table[] = {
+ {
+ set_power_nocheck, "HP Pavilion 05", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
+ DMI_MATCH(DMI_SYS_VENDOR, "HP Pavilion 05"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "2001211RE101GLEND") }, NULL},
+ {},
+};
+
+
/* --------------------------------------------------------------------------
Device Management
-------------------------------------------------------------------------- */
}
/*
- * Otherwise we assume the status of our parent (unless we don't
- * have one, in which case status is implied).
+ * According to ACPI spec some device can be present and functional
+ * even if the parent is not present but functional.
+ * In such conditions the child device should not inherit the status
+ * from the parent.
*/
- else if (device->parent)
- device->status = device->parent->status;
else
STRUCT_TO_INT(device->status) =
ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
if (device->status.functional && !device->status.present) {
- printk(KERN_WARNING PREFIX "Device [%s] status [%08x]: "
- "functional but not present; setting present\n",
- device->pnp.bus_id, (u32) STRUCT_TO_INT(device->status));
- device->status.present = 1;
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
+ "functional but not present;\n",
+ device->pnp.bus_id,
+ (u32) STRUCT_TO_INT(device->status)));
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
/*
* Get device's current power state
*/
- acpi_bus_get_power(device->handle, &device->power.state);
+ if (!acpi_power_nocheck) {
+ /*
+ * Maybe the incorrect power state is returned on the bogus
+ * bios, which is different with the real power state.
+ * For example: the bios returns D0 state and the real power
+ * state is D3. OS expects to set the device to D0 state. In
+ * such case if OS uses the power state returned by the BIOS,
+ * the device can't be transisted to the correct power state.
+ * So if the acpi_power_nocheck is set, it is unnecessary to
+ * get the power state by calling acpi_bus_get_power.
+ */
+ acpi_bus_get_power(device->handle, &device->power.state);
+ }
if ((state == device->power.state) && !device->flags.force_power_state) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device is already at D%d\n",
state));
}
} else
disable_acpi();
-
+ /*
+ * If the laptop falls into the DMI check table, the power state check
+ * will be disabled in the course of device power transistion.
+ */
+ dmi_check_system(power_nocheck_dmi_table);
return result;
}
acpi_device_bid(link->device)));
if (link->refcnt == 0) {
- acpi_ut_evaluate_object(link->device->handle, "_DIS", 0, NULL);
+ acpi_evaluate_object(link->device->handle, "_DIS", NULL, NULL);
}
mutex_unlock(&acpi_link_lock);
return (link->irq.active);
end:
/* disable all links -- to be activated on use */
- acpi_ut_evaluate_object(device->handle, "_DIS", 0, NULL);
+ acpi_evaluate_object(device->handle, "_DIS", NULL, NULL);
mutex_unlock(&acpi_link_lock);
if (result)
#define ACPI_POWER_RESOURCE_STATE_OFF 0x00
#define ACPI_POWER_RESOURCE_STATE_ON 0x01
#define ACPI_POWER_RESOURCE_STATE_UNKNOWN 0xFF
+
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "acpi."
+int acpi_power_nocheck;
+module_param_named(power_nocheck, acpi_power_nocheck, bool, 000);
+
static int acpi_power_add(struct acpi_device *device);
static int acpi_power_remove(struct acpi_device *device, int type);
static int acpi_power_resume(struct acpi_device *device);
return 0;
}
-static int acpi_power_get_state(struct acpi_power_resource *resource, int *state)
+static int acpi_power_get_state(acpi_handle handle, int *state)
{
acpi_status status = AE_OK;
unsigned long sta = 0;
- if (!resource || !state)
+ if (!handle || !state)
return -EINVAL;
- status = acpi_evaluate_integer(resource->device->handle, "_STA", NULL, &sta);
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
if (ACPI_FAILURE(status))
return -ENODEV;
ACPI_POWER_RESOURCE_STATE_OFF;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Resource [%s] is %s\n",
- resource->name, state ? "on" : "off"));
+ acpi_ut_get_node_name(handle), state ? "on" : "off"));
return 0;
}
static int acpi_power_get_list_state(struct acpi_handle_list *list, int *state)
{
int result = 0, state1;
- struct acpi_power_resource *resource = NULL;
u32 i = 0;
return -EINVAL;
/* The state of the list is 'on' IFF all resources are 'on'. */
+ /* */
for (i = 0; i < list->count; i++) {
- result = acpi_power_get_context(list->handles[i], &resource);
- if (result)
- return result;
- result = acpi_power_get_state(resource, &state1);
+ /*
+ * The state of the power resource can be obtained by
+ * using the ACPI handle. In such case it is unnecessary to
+ * get the Power resource first and then get its state again.
+ */
+ result = acpi_power_get_state(list->handles[i], &state1);
if (result)
return result;
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_ON)
- return -ENOEXEC;
-
+ if (!acpi_power_nocheck) {
+ /*
+ * If acpi_power_nocheck is set, it is unnecessary to check
+ * the power state after power transition.
+ */
+ result = acpi_power_get_state(resource->device->handle,
+ &state);
+ if (result)
+ return result;
+ if (state != ACPI_POWER_RESOURCE_STATE_ON)
+ return -ENOEXEC;
+ }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D0;
if (ACPI_FAILURE(status))
return -ENODEV;
- result = acpi_power_get_state(resource, &state);
- if (result)
- return result;
- if (state != ACPI_POWER_RESOURCE_STATE_OFF)
- return -ENOEXEC;
+ if (!acpi_power_nocheck) {
+ /*
+ * If acpi_power_nocheck is set, it is unnecessary to check
+ * the power state after power transition.
+ */
+ result = acpi_power_get_state(handle, &state);
+ if (result)
+ return result;
+ if (state != ACPI_POWER_RESOURCE_STATE_OFF)
+ return -ENOEXEC;
+ }
/* Update the power resource's _device_ power state */
resource->device->power.state = ACPI_STATE_D3;
if (!resource)
goto end;
- result = acpi_power_get_state(resource, &state);
+ result = acpi_power_get_state(resource->device->handle, &state);
if (result)
goto end;
resource->system_level = acpi_object.power_resource.system_level;
resource->order = acpi_object.power_resource.resource_order;
- result = acpi_power_get_state(resource, &state);
+ result = acpi_power_get_state(device->handle, &state);
if (result)
goto end;
resource = (struct acpi_power_resource *)acpi_driver_data(device);
- result = acpi_power_get_state(resource, &state);
+ result = acpi_power_get_state(device->handle, &state);
if (result)
return result;
#include <asm/uaccess.h>
#endif
+#include <asm/cpufeature.h>
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
acpi_status status = AE_OK;
acpi_handle handle = NULL;
-
if (!pr || !pr->performance || !pr->handle)
return -EINVAL;
result = acpi_processor_get_performance_control(pr);
if (result)
- return result;
+ goto update_bios;
result = acpi_processor_get_performance_states(pr);
if (result)
- return result;
+ goto update_bios;
return 0;
+
+ /*
+ * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
+ * the BIOS is older than the CPU and does not know its frequencies
+ */
+ update_bios:
+ if (ACPI_SUCCESS(acpi_get_handle(pr->handle, "_PPC", &handle))){
+ if(boot_cpu_has(X86_FEATURE_EST))
+ printk(KERN_WARNING FW_BUG "BIOS needs update for CPU "
+ "frequency support\n");
+ }
+ return result;
}
int acpi_processor_notify_smm(struct module *calling_module)
{
const struct acpi_device_id *id;
+ /*
+ * If the device is not present, it is unnecessary to load device
+ * driver for it.
+ */
+ if (!device->status.present)
+ return -ENODEV;
+
if (device->flags.hardware_id) {
for (id = ids; id->id[0]; id++) {
if (!strcmp((char*)id->id, device->pnp.hardware_id))
/* TBD: System wake support and resource requirements. */
device->power.state = ACPI_STATE_UNKNOWN;
+ acpi_bus_get_power(device->handle, &(device->power.state));
return 0;
}
return 0;
}
-static int
-acpi_is_child_device(struct acpi_device *device,
- int (*matcher)(struct acpi_device *))
-{
- int result = -ENODEV;
-
- do {
- if (ACPI_SUCCESS(matcher(device)))
- return AE_OK;
- } while ((device = device->parent));
-
- return result;
-}
-
static int
acpi_add_single_object(struct acpi_device **child,
struct acpi_device *parent, acpi_handle handle, int type,
result = -ENODEV;
goto end;
}
- if (!device->status.present) {
- /* Bay and dock should be handled even if absent */
- if (!ACPI_SUCCESS(
- acpi_is_child_device(device, acpi_bay_match)) &&
- !ACPI_SUCCESS(
- acpi_is_child_device(device, acpi_dock_match))) {
- result = -ENODEV;
- goto end;
- }
+ /*
+ * When the device is neither present nor functional, the
+ * device should not be added to Linux ACPI device tree.
+ * When the status of the device is not present but functinal,
+ * it should be added to Linux ACPI tree. For example : bay
+ * device , dock device.
+ * In such conditions it is unncessary to check whether it is
+ * bay device or dock device.
+ */
+ if (!device->status.present && !device->status.functional) {
+ result = -ENODEV;
+ goto end;
}
break;
default:
*/
acpi_device_set_id(device, parent, handle, type);
+ /*
+ * The ACPI device is attached to acpi handle before getting
+ * the power/wakeup/peformance flags. Otherwise OS can't get
+ * the corresponding ACPI device by the acpi handle in the course
+ * of getting the power/wakeup/performance flags.
+ */
+ result = acpi_device_set_context(device, type);
+ if (result)
+ goto end;
+
/*
* Power Management
* ----------------
goto end;
}
- if ((result = acpi_device_set_context(device, type)))
- goto end;
result = acpi_device_register(device, parent);
* TBD: Need notifications and other detection mechanisms
* in place before we can fully implement this.
*/
- if (child->status.present) {
+ /*
+ * When the device is not present but functional, it is also
+ * necessary to scan the children of this device.
+ */
+ if (child->status.present || (!child->status.present &&
+ child->status.functional)) {
status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
NULL, NULL);
if (ACPI_SUCCESS(status)) {
return 0;
}
+static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)
+{
+ struct guid_block *block = NULL;
+ char method[5];
+ struct acpi_object_list input;
+ union acpi_object params[1];
+ acpi_status status;
+ acpi_handle handle;
+
+ block = &wblock->gblock;
+ handle = wblock->handle;
+
+ if (!block)
+ return AE_NOT_EXIST;
+
+ input.count = 1;
+ input.pointer = params;
+ params[0].type = ACPI_TYPE_INTEGER;
+ params[0].integer.value = enable;
+
+ snprintf(method, 5, "WE%02X", block->notify_id);
+ status = acpi_evaluate_object(handle, method, &input, NULL);
+
+ if (status != AE_OK && status != AE_NOT_FOUND)
+ return status;
+ else
+ return AE_OK;
+}
+
/*
* Exported WMI functions
*/
char method[4] = "WM";
if (!find_guid(guid_string, &wblock))
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
block = &wblock->gblock;
handle = wblock->handle;
return AE_BAD_PARAMETER;
if (!find_guid(guid_string, &wblock))
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
block = &wblock->gblock;
handle = wblock->handle;
/* Check GUID is a data block */
if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
input.count = 1;
input.pointer = wq_params;
return AE_BAD_DATA;
if (!find_guid(guid_string, &wblock))
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
block = &wblock->gblock;
handle = wblock->handle;
/* Check GUID is a data block */
if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
input.count = 2;
input.pointer = params;
wmi_notify_handler handler, void *data)
{
struct wmi_block *block;
+ acpi_status status;
if (!guid || !handler)
return AE_BAD_PARAMETER;
block->handler = handler;
block->handler_data = data;
- return AE_OK;
+ status = wmi_method_enable(block, 1);
+
+ return status;
}
EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
acpi_status wmi_remove_notify_handler(const char *guid)
{
struct wmi_block *block;
+ acpi_status status;
if (!guid)
return AE_BAD_PARAMETER;
if (!block->handler)
return AE_NULL_ENTRY;
+ status = wmi_method_enable(block, 0);
+
block->handler = NULL;
block->handler_data = NULL;
- return AE_OK;
+ return status;
}
EXPORT_SYMBOL_GPL(wmi_remove_notify_handler);
depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
+ depends on RFKILL
select ACPI_WMI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
#include <linux/platform_device.h>
#include <linux/acpi.h>
#include <linux/i8042.h>
+#include <linux/rfkill.h>
+#include <linux/workqueue.h>
#include <linux/debugfs.h>
#include <acpi/acpi_drivers.h>
static int max_brightness = 0xF;
-static int wireless = -1;
-static int bluetooth = -1;
static int mailled = -1;
static int brightness = -1;
static int threeg = -1;
static int force_series;
module_param(mailled, int, 0444);
-module_param(wireless, int, 0444);
-module_param(bluetooth, int, 0444);
module_param(brightness, int, 0444);
module_param(threeg, int, 0444);
module_param(force_series, int, 0444);
-MODULE_PARM_DESC(wireless, "Set initial state of Wireless hardware");
-MODULE_PARM_DESC(bluetooth, "Set initial state of Bluetooth hardware");
MODULE_PARM_DESC(mailled, "Set initial state of Mail LED");
MODULE_PARM_DESC(brightness, "Set initial LCD backlight brightness");
MODULE_PARM_DESC(threeg, "Set initial state of 3G hardware");
struct acer_data {
int mailled;
- int wireless;
- int bluetooth;
int threeg;
int brightness;
};
u32 wmid_devices;
};
+static struct rfkill *wireless_rfkill;
+static struct rfkill *bluetooth_rfkill;
+
/* Each low-level interface must define at least some of the following */
struct wmi_interface {
/* The WMI device type */
}
break;
default:
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
}
return AE_OK;
}
break;
}
default:
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
}
/* Actually do the set */
return 0;
}
default:
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
}
status = WMI_execute_u32(method_id, 0, &result);
}
break;
default:
- return AE_BAD_ADDRESS;
+ return AE_ERROR;
}
return WMI_execute_u32(method_id, (u32)value, NULL);
}
static acpi_status get_u32(u32 *value, u32 cap)
{
- acpi_status status = AE_BAD_ADDRESS;
+ acpi_status status = AE_ERROR;
switch (interface->type) {
case ACER_AMW0:
* capability isn't available on the given interface
*/
set_u32(mailled, ACER_CAP_MAILLED);
- set_u32(wireless, ACER_CAP_WIRELESS);
- set_u32(bluetooth, ACER_CAP_BLUETOOTH);
set_u32(threeg, ACER_CAP_THREEG);
set_u32(brightness, ACER_CAP_BRIGHTNESS);
}
}
/*
- * Read/ write bool sysfs macro
+ * Rfkill devices
*/
-#define show_set_bool(value, cap) \
-static ssize_t \
-show_bool_##value(struct device *dev, struct device_attribute *attr, \
- char *buf) \
-{ \
- u32 result; \
- acpi_status status = get_u32(&result, cap); \
- if (ACPI_SUCCESS(status)) \
- return sprintf(buf, "%u\n", result); \
- return sprintf(buf, "Read error\n"); \
-} \
-\
-static ssize_t \
-set_bool_##value(struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
-{ \
- u32 tmp = simple_strtoul(buf, NULL, 10); \
- acpi_status status = set_u32(tmp, cap); \
- if (ACPI_FAILURE(status)) \
- return -EINVAL; \
- return count; \
-} \
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO | S_IWUSR, \
- show_bool_##value, set_bool_##value);
-
-show_set_bool(wireless, ACER_CAP_WIRELESS);
-show_set_bool(bluetooth, ACER_CAP_BLUETOOTH);
-show_set_bool(threeg, ACER_CAP_THREEG);
+static void acer_rfkill_update(struct work_struct *ignored);
+static DECLARE_DELAYED_WORK(acer_rfkill_work, acer_rfkill_update);
+static void acer_rfkill_update(struct work_struct *ignored)
+{
+ u32 state;
+ acpi_status status;
+
+ status = get_u32(&state, ACER_CAP_WIRELESS);
+ if (ACPI_SUCCESS(status))
+ rfkill_force_state(wireless_rfkill, state ?
+ RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED);
+
+ if (has_cap(ACER_CAP_BLUETOOTH)) {
+ status = get_u32(&state, ACER_CAP_BLUETOOTH);
+ if (ACPI_SUCCESS(status))
+ rfkill_force_state(bluetooth_rfkill, state ?
+ RFKILL_STATE_UNBLOCKED :
+ RFKILL_STATE_SOFT_BLOCKED);
+ }
+
+ schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
+}
+
+static int acer_rfkill_set(void *data, enum rfkill_state state)
+{
+ acpi_status status;
+ u32 *cap = data;
+ status = set_u32((u32) (state == RFKILL_STATE_UNBLOCKED), *cap);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ return 0;
+}
+
+static struct rfkill * acer_rfkill_register(struct device *dev,
+enum rfkill_type type, char *name, u32 cap)
+{
+ int err;
+ u32 state;
+ u32 *data;
+ struct rfkill *rfkill_dev;
+
+ rfkill_dev = rfkill_allocate(dev, type);
+ if (!rfkill_dev)
+ return ERR_PTR(-ENOMEM);
+ rfkill_dev->name = name;
+ get_u32(&state, cap);
+ rfkill_dev->state = state ? RFKILL_STATE_UNBLOCKED :
+ RFKILL_STATE_SOFT_BLOCKED;
+ data = kzalloc(sizeof(u32), GFP_KERNEL);
+ if (!data) {
+ rfkill_free(rfkill_dev);
+ return ERR_PTR(-ENOMEM);
+ }
+ *data = cap;
+ rfkill_dev->data = data;
+ rfkill_dev->toggle_radio = acer_rfkill_set;
+ rfkill_dev->user_claim_unsupported = 1;
+
+ err = rfkill_register(rfkill_dev);
+ if (err) {
+ kfree(rfkill_dev->data);
+ rfkill_free(rfkill_dev);
+ return ERR_PTR(err);
+ }
+ return rfkill_dev;
+}
+
+static int acer_rfkill_init(struct device *dev)
+{
+ wireless_rfkill = acer_rfkill_register(dev, RFKILL_TYPE_WLAN,
+ "acer-wireless", ACER_CAP_WIRELESS);
+ if (IS_ERR(wireless_rfkill))
+ return PTR_ERR(wireless_rfkill);
+
+ if (has_cap(ACER_CAP_BLUETOOTH)) {
+ bluetooth_rfkill = acer_rfkill_register(dev,
+ RFKILL_TYPE_BLUETOOTH, "acer-bluetooth",
+ ACER_CAP_BLUETOOTH);
+ if (IS_ERR(bluetooth_rfkill)) {
+ kfree(wireless_rfkill->data);
+ rfkill_unregister(wireless_rfkill);
+ return PTR_ERR(bluetooth_rfkill);
+ }
+ }
+
+ schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
+
+ return 0;
+}
+
+static void acer_rfkill_exit(void)
+{
+ cancel_delayed_work_sync(&acer_rfkill_work);
+ kfree(wireless_rfkill->data);
+ rfkill_unregister(wireless_rfkill);
+ if (has_cap(ACER_CAP_BLUETOOTH)) {
+ kfree(wireless_rfkill->data);
+ rfkill_unregister(bluetooth_rfkill);
+ }
+ return;
+}
/*
- * Read interface sysfs macro
+ * sysfs interface
*/
+static ssize_t show_bool_threeg(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 result; \
+ acpi_status status = get_u32(&result, ACER_CAP_THREEG);
+ if (ACPI_SUCCESS(status))
+ return sprintf(buf, "%u\n", result);
+ return sprintf(buf, "Read error\n");
+}
+
+static ssize_t set_bool_threeg(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ u32 tmp = simple_strtoul(buf, NULL, 10);
+ acpi_status status = set_u32(tmp, ACER_CAP_THREEG);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+ return count;
+}
+static DEVICE_ATTR(threeg, S_IWUGO | S_IRUGO | S_IWUSR, show_bool_threeg,
+ set_bool_threeg);
+
static ssize_t show_interface(struct device *dev, struct device_attribute *attr,
char *buf)
{
goto error_brightness;
}
- return 0;
+ err = acer_rfkill_init(&device->dev);
+
+ return err;
error_brightness:
acer_led_exit();
acer_led_exit();
if (has_cap(ACER_CAP_BRIGHTNESS))
acer_backlight_exit();
+
+ acer_rfkill_exit();
return 0;
}
if (!data)
return -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS)) {
- get_u32(&value, ACER_CAP_WIRELESS);
- data->wireless = value;
- }
-
- if (has_cap(ACER_CAP_BLUETOOTH)) {
- get_u32(&value, ACER_CAP_BLUETOOTH);
- data->bluetooth = value;
- }
-
if (has_cap(ACER_CAP_MAILLED)) {
get_u32(&value, ACER_CAP_MAILLED);
data->mailled = value;
if (!data)
return -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS))
- set_u32(data->wireless, ACER_CAP_WIRELESS);
-
- if (has_cap(ACER_CAP_BLUETOOTH))
- set_u32(data->bluetooth, ACER_CAP_BLUETOOTH);
-
- if (has_cap(ACER_CAP_THREEG))
- set_u32(data->threeg, ACER_CAP_THREEG);
-
if (has_cap(ACER_CAP_MAILLED))
set_u32(data->mailled, ACER_CAP_MAILLED);
static int remove_sysfs(struct platform_device *device)
{
- if (has_cap(ACER_CAP_WIRELESS))
- device_remove_file(&device->dev, &dev_attr_wireless);
-
- if (has_cap(ACER_CAP_BLUETOOTH))
- device_remove_file(&device->dev, &dev_attr_bluetooth);
-
if (has_cap(ACER_CAP_THREEG))
device_remove_file(&device->dev, &dev_attr_threeg);
{
int retval = -ENOMEM;
- if (has_cap(ACER_CAP_WIRELESS)) {
- retval = device_create_file(&acer_platform_device->dev,
- &dev_attr_wireless);
- if (retval)
- goto error_sysfs;
- }
-
- if (has_cap(ACER_CAP_BLUETOOTH)) {
- retval = device_create_file(&acer_platform_device->dev,
- &dev_attr_bluetooth);
- if (retval)
- goto error_sysfs;
- }
-
if (has_cap(ACER_CAP_THREEG)) {
retval = device_create_file(&acer_platform_device->dev,
&dev_attr_threeg);
acpi_status status;
struct pnp_dev *dev;
+ /*
+ * If a PnPacpi device is not present , the device
+ * driver should not be loaded.
+ */
status = acpi_get_handle(device->handle, "_CRS", &temp);
if (ACPI_FAILURE(status) || !ispnpidacpi(acpi_device_hid(device)) ||
- is_exclusive_device(device))
+ is_exclusive_device(device) || (!device->status.present))
return 0;
dev = pnp_alloc_dev(&pnpacpi_protocol, num, acpi_device_hid(device));
int acpi_disable_wakeup_device_power(struct acpi_device *dev);
int acpi_power_get_inferred_state(struct acpi_device *device);
int acpi_power_transition(struct acpi_device *device, int state);
+extern int acpi_power_nocheck;
#endif
/* --------------------------------------------------------------------------
struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG "[Firmware Bug]: "
+#define FW_WARN "[Firmware Warn]: "
+#define FW_INFO "[Firmware Info]: "
+
#ifdef CONFIG_PRINTK
asmlinkage int vprintk(const char *fmt, va_list args)
__attribute__ ((format (printf, 1, 0)));
projects / linux-2.6-omap-h63xx.git / commitdiff