# cscope files
cscope.*
+ncscope.*
*.orig
-*.rej
*~
\#*#
non-block filesystems which provide their own BDI, such as NFS
and FUSE.
+MAJOR:MINOR-fuseblk
+
+ Value of st_dev on fuseblk filesystems.
+
default
The default backing dev, used for non-block device backed
</sect1>
</chapter>
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+ <para>
+ There are functions that try to acquire a lock only once and immediately
+ return a value telling about success or failure to acquire the lock.
+ They can be used if you need no access to the data protected with the lock
+ when some other thread is holding the lock. You should acquire the lock
+ later if you then need access to the data protected with the lock.
+ </para>
+
+ <para>
+ <function>spin_trylock()</function> does not spin but returns non-zero if
+ it acquires the spinlock on the first try or 0 if not. This function can
+ be used in all contexts like <function>spin_lock</function>: you must have
+ disabled the contexts that might interrupt you and acquire the spin lock.
+ </para>
+
+ <para>
+ <function>mutex_trylock()</function> does not suspend your task
+ but returns non-zero if it could lock the mutex on the first try
+ or 0 if not. This function cannot be safely used in hardware or software
+ interrupt contexts despite not sleeping.
+ </para>
+</chapter>
+
<chapter id="Examples">
<title>Common Examples</title>
<para>
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+ [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+ Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+ Date: Tue May 13 19:10:30 2008 +0000
+
+ SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+ commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+ Date: Tue May 13 22:12:27 2008 +0200
+
+ wireless, airo: waitbusy() won't delay
+
+ [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
13) When to use Acked-by: and Cc:
intervals the CPU needs to be on average more than 80% in use to then
decide that the CPU frequency needs to be increased.
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency. When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency. Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
ignore_nice_load: this parameter takes a value of '0' or '1'. When
set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1', the processes that are
The following rules apply to each cpuset:
- Its CPUs and Memory Nodes must be a subset of its parents.
- - It can only be marked exclusive if its parent is.
+ - It can't be marked exclusive unless its parent is.
- If its cpu or memory is exclusive, they may not overlap any sibling.
These rules, and the natural hierarchy of cpusets, enable efficient
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
-Similarly, setting 'memory_spread_cache' turns on the flag
+Similarly, setting 'memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
In this directory you can find several files:
# ls
-cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks
+cpu_exclusive memory_migrate mems tasks
+cpus memory_pressure notify_on_release
+mem_exclusive memory_spread_page sched_load_balance
+mem_hardwall memory_spread_slab sched_relax_domain_level
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using
Setting it to very large values will improve
performance.
-barrier=1 This enables/disables barriers. barrier=0 disables
- it, barrier=1 enables it.
+barrier=<0|1(*)> This enables/disables the use of write barriers in
+ the jbd code. barrier=0 disables, barrier=1 enables.
+ This also requires an IO stack which can support
+ barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning.
+ Write barriers enforce proper on-disk ordering
+ of journal commits, making volatile disk write caches
+ safe to use, at some performance penalty. If
+ your disks are battery-backed in one way or another,
+ disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.
--- /dev/null
+Kernel driver ibmaem
+======================
+
+Supported systems:
+ * Any recent IBM System X server with Active Energy Manager support.
+ This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+ x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
+ driver ("ipmi-si") needs to be loaded for this driver to do anything.
+ Prefix: 'ibmaem'
+ Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC. All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces. This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software. Setting the power cap from the host
+is not currently supported.
kernel-doc nano-HOWTO
=====================
+How to format kernel-doc comments
+---------------------------------
+
+In order to provide embedded, 'C' friendly, easy to maintain,
+but consistent and extractable documentation of the functions and
+data structures in the Linux kernel, the Linux kernel has adopted
+a consistent style for documenting functions and their parameters,
+and structures and their members.
+
+The format for this documentation is called the kernel-doc format.
+It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
+
+This style embeds the documentation within the source files, using
+a few simple conventions. The scripts/kernel-doc perl script, some
+SGML templates in Documentation/DocBook, and other tools understand
+these conventions, and are used to extract this embedded documentation
+into various documents.
+
+In order to provide good documentation of kernel functions and data
+structures, please use the following conventions to format your
+kernel-doc comments in Linux kernel source.
+
+We definitely need kernel-doc formatted documentation for functions
+that are exported to loadable modules using EXPORT_SYMBOL.
+
+We also look to provide kernel-doc formatted documentation for
+functions externally visible to other kernel files (not marked
+"static").
+
+We also recommend providing kernel-doc formatted documentation
+for private (file "static") routines, for consistency of kernel
+source code layout. But this is lower priority and at the
+discretion of the MAINTAINER of that kernel source file.
+
+Data structures visible in kernel include files should also be
+documented using kernel-doc formatted comments.
+
+The opening comment mark "/**" is reserved for kernel-doc comments.
+Only comments so marked will be considered by the kernel-doc scripts,
+and any comment so marked must be in kernel-doc format. Do not use
+"/**" to be begin a comment block unless the comment block contains
+kernel-doc formatted comments. The closing comment marker for
+kernel-doc comments can be either "*/" or "**/".
+
+Kernel-doc comments should be placed just before the function
+or data structure being described.
+
+Example kernel-doc function comment:
+
+/**
+ * foobar() - short function description of foobar
+ * @arg1: Describe the first argument to foobar.
+ * @arg2: Describe the second argument to foobar.
+ * One can provide multiple line descriptions
+ * for arguments.
+ *
+ * A longer description, with more discussion of the function foobar()
+ * that might be useful to those using or modifying it. Begins with
+ * empty comment line, and may include additional embedded empty
+ * comment lines.
+ *
+ * The longer description can have multiple paragraphs.
+ **/
+
+The first line, with the short description, must be on a single line.
+
+The @argument descriptions must begin on the very next line following
+this opening short function description line, with no intervening
+empty comment lines.
+
+Example kernel-doc data structure comment.
+
+/**
+ * struct blah - the basic blah structure
+ * @mem1: describe the first member of struct blah
+ * @mem2: describe the second member of struct blah,
+ * perhaps with more lines and words.
+ *
+ * Longer description of this structure.
+ **/
+
+The kernel-doc function comments describe each parameter to the
+function, in order, with the @name lines.
+
+The kernel-doc data structure comments describe each structure member
+in the data structure, with the @name lines.
+
+The longer description formatting is "reflowed", losing your line
+breaks. So presenting carefully formatted lists within these
+descriptions won't work so well; derived documentation will lose
+the formatting.
+
+See the section below "How to add extractable documentation to your
+source files" for more details and notes on how to format kernel-doc
+comments.
+
+Components of the kernel-doc system
+-----------------------------------
+
Many places in the source tree have extractable documentation in the
form of block comments above functions. The components of this system
are:
* Name: "Gary's Encyclopedia - The Linux Kernel"
Author: Gary (I suppose...).
- URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
- Keywords: links, not found here?.
+ URL: http://slencyclopedia.berlios.de/index.html
+ Keywords: linux, community, everything!
Description: Gary's Encyclopedia exists to allow the rapid finding
of documentation and other information of interest to GNU/Linux
users. It has about 4000 links to external pages in 150 major
categories. This link is for kernel-specific links, documents,
- sites... Look there if you could not find here what you were
- looking for.
+ sites... This list is now hosted by developer.Berlios.de,
+ but seems not to have been updated since sometime in 1999.
* Name: "The home page of Linux-MM"
Author: The Linux-MM team.
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
+
+ /* Outstanding buffers */
+ unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
+ vq->inflight++;
return head;
}
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
+ vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
- /* If they don't want an interrupt, don't send one. */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ /* If they don't want an interrupt, don't send one, unless empty. */
+ if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ && vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */
This new release (2.91) has been put together by David Woodhouse
-<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
for yet another chipset. Now the generic support has been separated from the
individual chipset drivers, and the source files aren't quite so packed with
#ifdefs! I've changed this file a bit, but kept it in the first person from
In order to use the Ethernet bridging functionality, you'll need the
userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net. The download page is
+at http://www.linux-foundation.org/en/Net:Bridge. The download page is
http://prdownloads.sourceforge.net/bridge.
If you still have questions, don't hesitate to post to the mailing list
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
- 62 -> PowerColor Real Angel 330 [14f1:ea3d]
+ 62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
-1) The only hardware currently supported is the Hauppauge HVR-1600.
+1) The only hardware currently supported is the Hauppauge HVR-1600
+ card and the Compro VideoMate H900 (note that this card only
+ supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is
--- /dev/null
+pagemap, from the userspace perspective
+---------------------------------------
+
+pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
+userspace programs to examine the page tables and related information by
+reading files in /proc.
+
+There are three components to pagemap:
+
+ * /proc/pid/pagemap. This file lets a userspace process find out which
+ physical frame each virtual page is mapped to. It contains one 64-bit
+ value for each virtual page, containing the following data (from
+ fs/proc/task_mmu.c, above pagemap_read):
+
+ * Bits 0-55 page frame number (PFN) if present
+ * Bits 0-4 swap type if swapped
+ * Bits 5-55 swap offset if swapped
+ * Bits 55-60 page shift (page size = 1<<page shift)
+ * Bit 61 reserved for future use
+ * Bit 62 page swapped
+ * Bit 63 page present
+
+ If the page is not present but in swap, then the PFN contains an
+ encoding of the swap file number and the page's offset into the
+ swap. Unmapped pages return a null PFN. This allows determining
+ precisely which pages are mapped (or in swap) and comparing mapped
+ pages between processes.
+
+ Efficient users of this interface will use /proc/pid/maps to
+ determine which areas of memory are actually mapped and llseek to
+ skip over unmapped regions.
+
+ * /proc/kpagecount. This file contains a 64-bit count of the number of
+ times each page is mapped, indexed by PFN.
+
+ * /proc/kpageflags. This file contains a 64-bit set of flags for each
+ page, indexed by PFN.
+
+ The flags are (from fs/proc/proc_misc, above kpageflags_read):
+
+ 0. LOCKED
+ 1. ERROR
+ 2. REFERENCED
+ 3. UPTODATE
+ 4. DIRTY
+ 5. LRU
+ 6. ACTIVE
+ 7. SLAB
+ 8. WRITEBACK
+ 9. RECLAIM
+ 10. BUDDY
+
+Using pagemap to do something useful:
+
+The general procedure for using pagemap to find out about a process' memory
+usage goes like this:
+
+ 1. Read /proc/pid/maps to determine which parts of the memory space are
+ mapped to what.
+ 2. Select the maps you are interested in -- all of them, or a particular
+ library, or the stack or the heap, etc.
+ 3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
+ 4. Read a u64 for each page from pagemap.
+ 5. Open /proc/kpagecount and/or /proc/kpageflags. For each PFN you just
+ read, seek to that entry in the file, and read the data you want.
+
+For example, to find the "unique set size" (USS), which is the amount of
+memory that a process is using that is not shared with any other process,
+you can go through every map in the process, find the PFNs, look those up
+in kpagecount, and tally up the number of pages that are only referenced
+once.
+
+Other notes:
+
+Reading from any of the files will return -EINVAL if you are not starting
+the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
+into the file), or if the size of the read is not a multiple of 8 bytes.
$(call cmd,syscalls)
# Delete all targets during make clean
-clean-files := $(addprefix $(objtree)/,$(targets))
-
+clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))
W: http://sourceforge.net/projects/bonding/
S: Supported
-BROADBAND PROCESSOR ARCHITECTURE
-P: Arnd Bergmann
-M: arnd@arndb.de
-L: linuxppc-dev@ozlabs.org
-W: http://www.penguinppc.org/ppc64/
-S: Supported
-
BROADCOM B44 10/100 ETHERNET DRIVER
P: Gary Zambrano
M: zambrano@broadcom.com
L: discuss@x86-64.org
S: Maintained
+CELL BROADBAND ENGINE ARCHITECTURE
+P: Arnd Bergmann
+M: arnd@arndb.de
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: maxextreme@gmail.com
W: http://linuxtv.org
S: Maintained
+CXGB3 ETHERNET DRIVER (CXGB3)
+P: Divy Le Ray
+M: divy@chelsio.com
+L: netdev@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+
+CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
+P: Steve Wise
+M: swise@chelsio.com
+L: general@lists.openfabrics.org
+W: http://www.openfabrics.org
+S: Supported
+
CYBERPRO FB DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: bridge@lists.linux-foundation.org
-W: http://bridge.sourceforge.net/
+W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
ETHERTEAM 16I DRIVER
S: Maintained
FREESCALE DMA DRIVER
-P; Zhang Wei
-M: wei.zhang@freescale.com
+P: Li Yang
+M: leoli@freescale.com
+P: Zhang Wei
+M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
S: Maintained
I2C SUBSYSTEM
-P: Jean Delvare
+P: Jean Delvare (PC drivers, core)
M: khali@linux-fr.org
+P: Ben Dooks (embedded platforms)
+M: ben-linux@fluff.org
L: i2c@lm-sensors.org
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
S: Maintained
KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*)
P: Sam Ravnborg
M: sam@ravnborg.org
-T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git
+T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
S: Maintained
KERNEL VIRTUAL MACHINE (KVM)
P: Avi Kivity
M: avi@qumranet.com
-L: kvm-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
P: Hollis Blanchard
M: hollisb@us.ibm.com
-L: kvm-ppc-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm-ppc@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
-KERNEL VIRTUAL MACHINE For Itanium(KVM/IA64)
+KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
P: Anthony Xu
M: anthony.xu@intel.com
P: Xiantao Zhang
M: xiantao.zhang@intel.com
-L: kvm-ia64-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm-ia64@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
-W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
L: linux-kernel@vger.kernel.org
S: Maintained
+MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
+P: Andrew Gallatin
+M: gallatin@myri.com
+P: Brice Goglin
+M: brice@myri.com
+L: netdev@vger.kernel.org
+W: http://www.myri.com/scs/download-Myri10GE.html
+S: Supported
+
NATSEMI ETHERNET DRIVER (DP8381x)
P: Tim Hockin
M: thockin@hockin.org
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
-P: Nishi Gupta
-M: ngupta@neteffect.com
+P: Chien Tung
+M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
P: Linas Vepstas
M: linas@austin.ibm.com
L: linux-kernel@vger.kernel.org
-L: linux-pci@atrey.karlin.mff.cuni.cz
+L: linux-pci@vger.kernel.org
S: Supported
PCI SUBSYSTEM
PPP OVER ETHERNET
P: Michal Ostrowski
-M: mostrows@speakeasy.net
+M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
S: Maintained
REISERFS FILE SYSTEM
-P: Hans Reiser
-M: reiserfs-dev@namesys.com
L: reiserfs-devel@vger.kernel.org
-W: http://www.namesys.com
S: Supported
RFKILL
L: spi-devel-general@lists.sourceforge.net
S: Maintained
+SPU FILE SYSTEM
+P: Jeremy Kerr
+M: jk@ozlabs.org
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
L: linux-scsi@vger.kernel.org
S: Maintained
+UCLINUX (AND M68KNOMMU)
+P: Greg Ungerer
+M: gerg@uclinux.org
+W: http://www.uclinux.org/
+L: uclinux-dev@uclinux.org (subscribers-only)
+S: Maintained
+
+UCLINUX FOR NEC V850
+P: Miles Bader
+
+UCLINUX FOR RENESAS H8/300
+P: Yoshinori Sato
+M: ysato@users.sourceforge.jp
+W: http://uclinux-h8.sourceforge.jp/
+S: Supported
+
UDF FILESYSTEM
P: Jan Kara
M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
+UFS FILESYSTEM
+P: Evgeniy Dushistov
+M: dushistov@mail.ru
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
+UltraSPARC (sparc64):
+P: David S. Miller
+M: davem@davemloft.net
+L: sparclinux@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
+S: Maintained
+
UNIFORM CDROM DRIVER
P: Jens Axboe
M: axboe@kernel.dk
W: http://www.linux-usb.org/usbnet
S: Maintained
+USB DIAMOND RIO500 DRIVER
+P: Cesar Miquel
+M: miquel@df.uba.ar
+L: rio500-users@lists.sourceforge.net
+W: http://rio500.sourceforge.net
+S: Maintained
+
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
L: linux-kernel@vger.kernel.org
S: Maintained
+UTIL-LINUX-NG PACKAGE
+P: Karel Zak
+M: kzak@redhat.com
+L: util-linux-ng@vger.kernel.org
+W: http://kernel.org/~kzak/util-linux-ng/
+T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+S: Maintained
+
VFAT/FAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
L: netdev@vger.kernel.org
S: Maintained
-UCLINUX (AND M68KNOMMU)
-P: Greg Ungerer
-M: gerg@uclinux.org
-W: http://www.uclinux.org/
-L: uclinux-dev@uclinux.org (subscribers-only)
-S: Maintained
-
-UCLINUX FOR NEC V850
-P: Miles Bader
-
-UCLINUX FOR RENESAS H8/300
-P: Yoshinori Sato
-M: ysato@users.sourceforge.jp
-W: http://uclinux-h8.sourceforge.jp/
-S: Supported
-
-UFS FILESYSTEM
-P: Evgeniy Dushistov
-M: dushistov@mail.ru
-L: linux-kernel@vger.kernel.org
-S: Maintained
-
-UltraSPARC (sparc64):
-P: David S. Miller
-M: davem@davemloft.net
-L: sparclinux@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
-S: Maintained
-
-USB DIAMOND RIO500 DRIVER
-P: Cesar Miquel
-M: miquel@df.uba.ar
-L: rio500-users@lists.sourceforge.net
-W: http://rio500.sourceforge.net
-S: Maintained
-
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
+ include/linux/bounds.h include/asm*/asm-offsets.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
elif $1 --version 2>&1 | grep -iq emacs; then \
$(all-sources) | xargs $1 -a; \
$(all-kconfigs) | xargs $1 -a \
- --regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
+ --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'; \
$(all-defconfigs) | xargs -r $1 -a \
--regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
else \
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
-#ifdef CONFIG_ARCH_COTULLA_IDP
- mov r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
locomo_writel(r, mapbase + LOCOMO_GIE);
}
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+ unsigned int mask;
+ void __iomem *mapbase = get_irq_chip_data(irq);
+
+ mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+ if (type == IRQT_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+ }
+
+ if (type & __IRQT_RISEDGE)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & __IRQT_FALEDGE)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+ locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+ locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+ return 0;
+}
+
static struct irq_chip locomo_gpio_chip = {
- .name = "LOCOMO-gpio",
- .ack = locomo_gpio_ack_irq,
- .mask = locomo_gpio_mask_irq,
- .unmask = locomo_gpio_unmask_irq,
+ .name = "LOCOMO-gpio",
+ .ack = locomo_gpio_ack_irq,
+ .mask = locomo_gpio_mask_irq,
+ .unmask = locomo_gpio_unmask_irq,
+ .set_type = locomo_gpio_type,
};
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
- set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
- set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
- set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
- set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
- for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+ for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
set_irq_chip(irq, &locomo_spi_chip);
set_irq_chip_data(irq, irqbase);
set_irq_handler(irq, handle_edge_irq);
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
- save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
locomo_writel(0x00, lchip->base + LOCOMO_ASD);
- save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */
- locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+ save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
+ locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
locomo_writel(0x00, lchip->base + LOCOMO_DAC);
locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
- if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+ if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
else
/* 18MHz already enabled, so no wait */
spin_lock_irqsave(&lchip->lock, flags);
locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
- locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+ locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
- locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+ locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_C32K);
locomo_writel(0x90, lchip->base + LOCOMO_TADC);
/* GPIO */
locomo_writel(0, lchip->base + LOCOMO_GPO);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPE);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPD);
locomo_writel(0, lchip->base + LOCOMO_GIE);
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPD);
- r &= ~bits;
+ if (dir)
+ r |= bits;
+ else
+ r &= ~bits;
locomo_writel(r, lchip->base + LOCOMO_GPD);
r = locomo_readl(lchip->base + LOCOMO_GPE);
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
+
+EXPORT_SYMBOL(copy_page);
module_init(arthur_init);
module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
#include "generic.h"
/*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
lm_set_drvdata(dev, impd1);
- printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+ printk("IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
- printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
+ extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
0,
};
#define palmte_get_power_status NULL
#endif
-static struct tsc2102_config palmte_tsc2102_config = {
- .use_internal = 0,
- .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
- .temp_at25c = { 2200, 2615 },
- .apm_report = palmte_get_power_status,
- .alsa_config = &palmte_alsa_config,
-};
-
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
- .platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
KEY(2, 0, KEY_CAMERA),
0,
};
static void __init omap_2430sdp_map_io(void)
{
+ omap2_set_globals_243x();
omap2_map_common_io();
}
static void __init omap_apollon_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
static void __init omap_generic_map_io(void)
{
+ omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
omap2_map_common_io();
}
static void __init omap_h4_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
/* REVISIT: What are the appropriate exclusions for 34XX? */
/* OMAP3: ignore DSS-mod clocks */
if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+ (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+ ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+ clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
return;
/* Check if both functional and interface clocks
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
.name = "iva2_ck",
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
.clksel = iva2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
.name = "gpio6_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT6_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
.name = "gpio5_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT5_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
.name = "gpio4_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT4_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
.name = "gpio3_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT3_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
.name = "gpio2_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT2_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
/* CM_FCLKEN_IVA2 */
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT 8
static struct clk *mbox_ick_handle;
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+ omap_mbox_type_t irq);
+
static inline unsigned int mbox_read_reg(unsigned int reg)
{
return __raw_readl(mbox_base + reg);
}
/* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
{
unsigned int l;
l |= 0x00000011;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
+ omap2_mbox_enable_irq(mbox, IRQ_RX);
+
return 0;
}
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
{
clk_disable(mbox_ick_handle);
clk_put(mbox_ick_handle);
}
/* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_msg_t) mbox_read_reg(fifo->msg);
}
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
mbox_write_reg(msg, fifo->msg);
}
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_read_reg(fifo->msg_stat) == 0);
}
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
}
/* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
mbox_write_reg(bit, p->irqstatus);
}
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
/*
* Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the
}
static struct hw_pci dns323_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
}
static struct hw_pci kurobox_pro_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
[2] = {
.start = COLIBRI_ETH_IRQ,
.end = COLIBRI_ETH_IRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
/* DM9000 LAN */
pxa_gpio_mode(GPIO78_nCS_2_MD);
pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
- set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static void tosa_poweroff(void)
{
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+ gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
int ret = 0;
/* cpu initialize */
- GAFR = ( GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
- GPIO_32_768kHz );
-
- GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
- GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
- GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
- GPLR = GPIO_GPIO18;
-
- // PPC pin setting
- PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
- PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
- PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
-
- PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
-
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_32_768kHz;
+ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+ GPIO_MCP_CLK | GPIO_32_768kHz;
+
+ GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+ COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+ COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+
+ PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+
+ PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+ COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+
+ PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+ PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+ PCFR = PCFR_OPDE;
+
platform_scoop_config = &collie_pcmcia_config;
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
- mcr p15, 0, r3, c7, c10, 2 @ clean D entry
+ mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
return;
spin_lock_irqsave(&clockfw_lock, flags);
- BUG_ON(clk->usecount == 0);
+ if (clk->usecount == 0) {
+ printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
+
+out:
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
chan->data = data;
#ifndef CONFIG_ARCH_OMAP1
chan->chain_id = -1;
+ chan->next_linked_ch = -1;
#endif
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
printk(KERN_ERR "omap_dma: Request failed %d\n", err);
return err;
}
- dma_chan[channels[i]].next_linked_ch = -1;
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
"failed to register mailbox interrupt:%d\n", ret);
goto fail_request_irq;
}
- enable_mbox_irq(mbox, IRQ_RX);
mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
if (!mq) {
/* rename any peripherals used differing from the s3c2410 */
+ s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
#
# File systems
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
#
# Bus options
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# File systems
#
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
+
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
{
return cpufreq_register_driver(&at32_driver);
}
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);
comment "Misc"
-config ENET_FLASH_PIN
- int "PF port/pin used for flash and ethernet sharing"
- depends on (BFIN533_STAMP)
- default 0
- help
- PF port/pin used for flash and ethernet sharing to allow other PF
- pins to be used on other platforms without having to touch common
- code.
- For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
-
choice
prompt "Blackfin Exception Scratch Register"
default BFIN_SCRATCH_REG_RETN
prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M
depends on BFIN_DMA_5XX
+config DMA_UNCACHED_4M
+ bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
+# Fri May 16 10:02:29 2008
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC32M16A2TG_75=y
CONFIG_BFIN527_EZKIT=y
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
#
# Networking
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_SMC91X is not set
CONFIG_BFIN_MAC=y
CONFIG_BFIN_MAC_USE_L1=y
CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
#
-# Enable Host or Gadget support to see Inventra options
+# Blackfin high speed USB support
#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+# CONFIG_USB_LIBUSUAL is not set
#
-# LED devices
+# USB Imaging devices
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
#
-# LED drivers
+# USB port drivers
#
#
-# LED Triggers
+# USB Serial Converter support
#
+# CONFIG_USB_SERIAL is not set
#
-# InfiniBand support
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# USB DSL modem support
#
#
-# Real Time Clock
+# USB Gadget Support
#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
#
# File systems
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_SPORT0_RX=9
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
CONFIG_BFIN548_EZKIT=y
+# CONFIG_BFIN548_BLUETECHNIX_CM is not set
#
# BF548 Specific Configuration
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=512
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_BF54X=y
-CONFIG_PATA_BF54X_DMA=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
#
# Frame buffer hardware drivers
#
-# CONFIG_FB_BFIN_7171 is not set
-# CONFIG_FB_BFIN_7393 is not set
CONFIG_FB_BF54X_LQ043=y
# CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_BFIN_7393 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
+#
+# SPI devices
+#
+
#
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
CONFIG_SND_BF5XX_SPORT_NUM=0
CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+
+#
+# SoC Audio support for SuperH
+#
CONFIG_SND_SOC_AD1980=y
#
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
#
-# Enable Host or Gadget support to see Inventra options
+# USB Host Controller Drivers
#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
#
-# CONFIG_USB_GADGET is not set
-CONFIG_MMC=m
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_UNSAFE_RESUME is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
-# MMC/SD Card Drivers
+# USB Imaging devices
#
-CONFIG_MMC_BLOCK=m
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
#
-# MMC/SD Host Controller Drivers
+# USB port drivers
#
-CONFIG_SDH_BFIN=m
-# CONFIG_SPI_MMC is not set
#
-# LED devices
+# USB Serial Converter support
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USB_SERIAL is not set
#
-# LED drivers
+# USB Miscellaneous drivers
#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
#
-# LED Triggers
+# USB DSL modem support
#
#
-# InfiniBand support
+# USB Gadget Support
#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# MMC/SD Card Drivers
#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
-# Real Time Clock
+# MMC/SD Host Controller Drivers
#
+CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_SPI_MMC is not set
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
+# Userspace I/O
#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
#
# File systems
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
#
# Memory Setup
#
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=64
CONFIG_MEM_ADD_WIDTH=10
#
{
pr_debug("request_dma() : BEGIN \n");
+
+#if defined(CONFIG_BF561) && ANOMALY_05000182
+ if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
+ if (get_cclk() > 500000000) {
+ printk(KERN_WARNING
+ "Request IMDMA failed due to ANOMALY 05000182\n");
+ return -EFAULT;
+ }
+ }
+#endif
+
mutex_lock(&(dma_ch[channel].dmalock));
if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
#else
+int gpio_get_value(unsigned gpio)
+{
+ unsigned long flags;
+ int ret;
+
+ if (unlikely(get_gpio_edge(gpio))) {
+ local_irq_save(flags);
+ set_gpio_edge(gpio, 0);
+ ret = get_gpio_data(gpio);
+ set_gpio_edge(gpio, 1);
+ local_irq_restore(flags);
+
+ return ret;
+ } else
+ return get_gpio_data(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+
int gpio_direction_input(unsigned gpio)
{
unsigned long flags;
EXPORT_SYMBOL(outsb);
EXPORT_SYMBOL(insb);
EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsw_8);
EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insw_8);
EXPORT_SYMBOL(outsl);
EXPORT_SYMBOL(insl);
EXPORT_SYMBOL(insl_16);
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>
#include <linux/fs.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
CSYNC();
}
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
case VEC_CPLB_MHIT:
info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_NOTICE "NULL pointer access (probably)\n");
-#else
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ if (saved_dcplb_fault_addr < FIXED_CODE_START)
+ printk(KERN_NOTICE "NULL pointer access\n");
+ else
#endif
+ printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x28 - Emulation Watchpoint, handled here */
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
case VEC_CPLB_I_MHIT:
info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
-#else
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ if (saved_icplb_fault_addr < FIXED_CODE_START)
+ printk(KERN_NOTICE "Jump to NULL address\n");
+ else
#endif
+ printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2E - Illegal use of Supervisor Resource, handled here */
oops_in_progress = 1;
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*/
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
{
- return ~do_csum(iph, ihl * 4);
+ return (__force __sum16)~do_csum(iph, ihl * 4);
}
/*
*
* it's best to have buff aligned on a 32-bit boundary
*/
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+__wsum csum_partial(const void *buff, int len, __wsum sum)
{
/*
* Just in case we get nasty checksum data...
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
-unsigned short ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
{
- return ~do_csum(buff, len);
+ return (__force __sum16)~do_csum(buff, len);
}
/*
* copy from fs while checksumming, otherwise like csum_partial
*/
-unsigned int
-csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
- int len, int sum, int *csum_err)
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err)
{
if (csum_err)
*csum_err = 0;
- memcpy(dst, src, len);
+ memcpy(dst, (__force void *)src, len);
return csum_partial(dst, len, sum);
}
* copy from ds while checksumming, otherwise like csum_partial
*/
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
- int len, int sum)
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
{
memcpy(dst, src, len);
return csum_partial(dst, len, sum);
* Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
*
* Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
* Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
RTS;
ENDPROC(_insw)
+ENTRY(_insw_8)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R0 = W[P0];
+ B[P1++] = R0;
+ R0 = R0 >> 8;
+ B[P1++] = R0;
+ NOP;
+.Lword8_loop_e: NOP;
+ sti R3;
+ RTS;
+ENDPROC(_insw_8)
+
ENTRY(_insb)
P0 = R0; /* P0 = port */
cli R3;
RTS;
ENDPROC(_insb)
-
-
ENTRY(_insl_16)
P0 = R0; /* P0 = port */
cli R3;
* Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
*
* Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
.Lbyte_loop_e: B[P0] = R0;
RTS;
ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+ R0 = B[P1++];
+ R0 = R0 << 8;
+ R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+ RTS;
+ENDPROC(_outsw_8)
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
+ .irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- .type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
- .type = "pcf8574_keypad",
.irq = IRQ_PF8,
},
#endif
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
};
#endif
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
.name = "Bootloader",
.end = 0x203fffff,
.flags = IORESOURCE_MEM,
}, {
- .start = CONFIG_ENET_FLASH_PIN,
+ .start = 0x7BB07BB0, /* AMBCTL0 setting when accessing flash */
+ .end = 0x7BB07BB0, /* AMBCTL1 setting when accessing flash */
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = GPIO_PF0,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device stamp_flash_device = {
- .name = "BF5xx-Flash",
+ .name = "bfin-async-flash",
.id = 0,
.dev = {
.platform_data = &stamp_flash_data,
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
&bfin_gpios_device,
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
&stamp_flash_device,
#endif
};
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
- bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+ bfin_write_FIO_FLAG_S(PF0);
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
void native_machine_restart(char *cmd)
{
-#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
- bfin_write_FIO_INEN(~BIT_TO_SET);
- bfin_write_FIO_DIR(BIT_TO_SET);
- bfin_write_FIO_FLAG_C(BIT_TO_SET);
+ /* workaround pull up on cpld / flash pin not being strong enough */
+ bfin_write_FIO_INEN(~PF0);
+ bfin_write_FIO_DIR(PF0);
+ bfin_write_FIO_FLAG_C(PF0);
}
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
+++ /dev/null
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 12;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
- R2 = ~R1;
-
- P0.H = hi(PORTF_FER);
- P0.L = lo(PORTF_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_DIR);
- P0.L = lo(PORTFIO_DIR);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_INEN);
- P0.L = lo(PORTFIO_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- R1 = ~R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o
static int __init cm_bf548_init(void)
{
- printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
};
#endif
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bf54x_spi_board_info,
- ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
+++ /dev/null
-/****************************************************
- * LED1 ---- PG6 LED2 ---- PG7 *
- * LED3 ---- PG8 LED4 ---- PG9 *
- * LED5 ---- PG10 LED6 ---- PG11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 0;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
- R2 = ~R1;
-
- P0.H = hi(PORTG_FER);
- P0.L = lo(PORTG_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTG_DIR_SET);
- P0.L = lo(PORTG_DIR_SET);
- W[P0] = R1.L;
- SSYNC;
-
- P0.H = hi(PORTG_INEN);
- P0.L = lo(PORTG_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_SET);
- P0.L = lo(PORTG_SET);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_CLEAR);
- P0.L = lo(PORTG_CLEAR);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
};
#endif
-#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
.bits_per_word = 8,
};
#endif
-#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
*/
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
/* cmode.S: clock mode management
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
/* sleep.S: power saving mode entry
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#include <linux/types.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/segment.h>
*/
static unsigned long empty_bad_page_table;
static unsigned long empty_bad_page;
+
unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
/*****************************************************************************/
/*
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
DBG_FAULT(15)
FAULT(15)
- /*
- * Squatting in this space ...
- *
- * This special case dispatcher for illegal operation faults allows preserved
- * registers to be modified through a callback function (asm only) that is handed
- * back from the fault handler in r8. Up to three arguments can be passed to the
- * callback function by returning an aggregate with the callback as its first
- * element, followed by the arguments.
- */
-ENTRY(dispatch_illegal_op_fault)
- .prologue
- .body
- SAVE_MIN_WITH_COVER
- ssm psr.ic | PSR_DEFAULT_BITS
- ;;
- srlz.i // guarantee that interruption collection is on
- ;;
-(p15) ssm psr.i // restore psr.i
- adds r3=8,r2 // set up second base pointer for SAVE_REST
- ;;
- alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
- mov out0=ar.ec
- ;;
- SAVE_REST
- PT_REGS_UNWIND_INFO(0)
- ;;
- br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0: ;;
- alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
- mov out0=r9
- mov out1=r10
- mov out2=r11
- movl r15=ia64_leave_kernel
- ;;
- mov rp=r15
- mov b6=r8
- ;;
- cmp.ne p6,p0=0,r8
-(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
- br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
.org ia64_ivt+0x4000
/////////////////////////////////////////////////////////////////////////////////////////
// 0x4000 Entry 16 (size 64 bundles) Reserved
DBG_FAULT(67)
FAULT(67)
+ /*
+ * Squatting in this space ...
+ *
+ * This special case dispatcher for illegal operation faults allows preserved
+ * registers to be modified through a callback function (asm only) that is handed
+ * back from the fault handler in r8. Up to three arguments can be passed to the
+ * callback function by returning an aggregate with the callback as its first
+ * element, followed by the arguments.
+ */
+ENTRY(dispatch_illegal_op_fault)
+ .prologue
+ .body
+ SAVE_MIN_WITH_COVER
+ ssm psr.ic | PSR_DEFAULT_BITS
+ ;;
+ srlz.i // guarantee that interruption collection is on
+ ;;
+(p15) ssm psr.i // restore psr.i
+ adds r3=8,r2 // set up second base pointer for SAVE_REST
+ ;;
+ alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
+ mov out0=ar.ec
+ ;;
+ SAVE_REST
+ PT_REGS_UNWIND_INFO(0)
+ ;;
+ br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0: ;;
+ alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
+ mov out0=r9
+ mov out1=r10
+ mov out2=r11
+ movl r15=ia64_leave_kernel
+ ;;
+ mov rp=r15
+ mov b6=r8
+ ;;
+ cmp.ne p6,p0=0,r8
+(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
+ br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
#ifdef CONFIG_IA32_SUPPORT
/*
#define ACCOUNT_SYS_ENTER
#endif
+.section ".data.patch.rse", "a"
+.previous
+
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
+ WORKAROUND; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
st8 [r25]=r10; /* ar.ssd */ \
;;
-#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, )
+#define RSE_WORKAROUND \
+(pUStk) extr.u r17=r18,3,6; \
+(pUStk) sub r16=r18,r22; \
+[1:](pKStk) br.cond.sptk.many 1f; \
+ .xdata4 ".data.patch.rse",1b-. \
+ ;; \
+ cmp.ge p6,p7 = 33,r17; \
+ ;; \
+(p6) mov r17=0x310; \
+(p7) mov r17=0x308; \
+ ;; \
+ cmp.leu p1,p0=r16,r17; \
+(p1) br.cond.sptk.many 1f; \
+ dep.z r17=r26,0,62; \
+ movl r16=2f; \
+ ;; \
+ mov ar.pfs=r17; \
+ dep r27=r0,r27,16,14; \
+ mov b0=r16; \
+ ;; \
+ br.ret.sptk b0; \
+ ;; \
+2: \
+ mov ar.rsc=r0 \
+ ;; \
+ flushrs; \
+ ;; \
+ mov ar.bspstore=r22 \
+ ;; \
+ mov r18=ar.bsp; \
+ ;; \
+1: \
+ .pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , )
ia64_srlz_i();
}
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+ s32 *offp = (s32 *) start;
+ u64 ip, *b;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) offp + *offp;
+
+ b = (u64 *)(ip & -16);
+ b[1] &= ~0xf800000L;
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
void __init
ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
{
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
+#ifdef CONFIG_ITANIUM
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+ {
+ u64 num_phys_stacked;
+
+ if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+ }
+#endif
+
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
__end___vtop_patchlist = .;
}
+ .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+ {
+ __start___rse_patchlist = .;
+ *(.data.patch.rse)
+ __end___rse_patchlist = .;
+ }
+
.data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;
always := $(offsets-file)
targets := $(offsets-file)
targets += arch/ia64/kvm/asm-offsets.s
-clean-files := $(addprefix $(objtree)/,$(targets) $(obj)/memcpy.S $(obj)/memset.S)
# Default sed regexp - multiline due to syntax constraints
define sed-y
kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
vtlb.o process.o
#Add link memcpy and memset to avoid possible structure assignment error
-kvm-intel-objs += ../lib/memset.o ../lib/memcpy.o
+kvm-intel-objs += memcpy.o memset.o
obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
--- /dev/null
+#include "../lib/memcpy.S"
--- /dev/null
+#include "../lib/memset.S"
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
config ARCH_MAY_HAVE_PC_FDC
bool
- depends on Q40 || (BROKEN && SUN3X)
+ depends on BROKEN && (Q40 || SUN3X)
default y
config NO_IOPORT
To compile this driver as a module, choose M here.
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:06 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_A2232=m
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_WHIPPET_SERIAL is not set
CONFIG_MULTIFACE_III_TTY=m
# CONFIG_SERIAL_CONSOLE is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:07 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:09 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:10 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:12 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:14 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-multi"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+CONFIG_AMIGA=y
+CONFIG_ATARI=y
+CONFIG_MAC=y
+CONFIG_NUBUS=y
+CONFIG_M68K_L2_CACHE=y
+CONFIG_APOLLO=y
+CONFIG_VME=y
+CONFIG_MVME147=y
+CONFIG_MVME16x=y
+CONFIG_BVME6000=y
+CONFIG_HP300=y
+CONFIG_DIO=y
+CONFIG_SUN3X=y
+CONFIG_Q40=y
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+CONFIG_STRAM_PROC=y
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ZORRO_NAMES=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_ATARI_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_IDEDOUBLER=y
+CONFIG_BLK_DEV_BUDDHA=y
+CONFIG_BLK_DEV_FALCON_IDE=y
+CONFIG_BLK_DEV_MAC_IDE=y
+CONFIG_BLK_DEV_Q40IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_MVME147_SCSI=y
+CONFIG_MVME16x_SCSI=y
+CONFIG_BVME6000_SCSI=y
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ARIADNE=m
+CONFIG_A2065=m
+CONFIG_HYDRA=m
+CONFIG_ZORRO8390=m
+CONFIG_APNE=m
+CONFIG_APOLLO_ELPLUS=y
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+CONFIG_MVME147_NET=y
+CONFIG_MVME16x_NET=y
+CONFIG_BVME6000_NET=y
+CONFIG_ATARILANCE=m
+CONFIG_SUN3LANCE=y
+CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_AMIGA=m
+CONFIG_MOUSE_ATARI=m
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_Q40KBD=m
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_A2232=m
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
+CONFIG_FB_APOLLO=y
+CONFIG_FB_Q40=y
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+CONFIG_FB_FM2=y
+CONFIG_FB_ATARI=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_MAC=y
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_PEARL_8x8=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_MAC_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_ATARI=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# Character devices
+#
+CONFIG_ATARI_MFPSER=m
+CONFIG_ATARI_SCC=y
+CONFIG_ATARI_SCC_DMA=y
+CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_DSP56K=m
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+CONFIG_MULTIFACE_III_TTY=m
+CONFIG_MAC_SCC=y
+CONFIG_MAC_HID=y
+CONFIG_MVME147_SCC=y
+CONFIG_SERIAL167=y
+CONFIG_MVME162_SCC=y
+CONFIG_BVME6000_SCC=y
+CONFIG_DN_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:17 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:19 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:20 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_GENERIC_IOMAP=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:22 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:23 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#endif
#ifdef CONFIG_HP300
- is_not_hp300(1f)
+ is_not_hp300(2f)
/*
* Fix up the iobase register to point to the new location of the LEDs.
*/
* setup.
*/
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#endif
unsigned long m68k_machtype;
-unsigned long m68k_cputype;
EXPORT_SYMBOL(m68k_machtype);
+unsigned long m68k_cputype;
EXPORT_SYMBOL(m68k_cputype);
unsigned long m68k_fputype;
unsigned long m68k_mmutype;
+EXPORT_SYMBOL(m68k_mmutype);
#ifdef CONFIG_VME
unsigned long vme_brdtype;
EXPORT_SYMBOL(vme_brdtype);
/* set ISA defs early as possible */
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
-#if defined(CONFIG_Q40)
if (MACH_IS_Q40) {
- isa_type = Q40_ISA;
+ isa_type = ISA_TYPE_Q40;
isa_sex = 0;
}
-#elif defined(CONFIG_GG2)
+#ifdef CONFIG_GG2
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
- isa_type = GG2_ISA;
+ isa_type = ISA_TYPE_GG2;
isa_sex = 0;
}
-#elif defined(CONFIG_AMIGA_PCMCIA)
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
- isa_type = AG_ISA;
+ isa_type = ISA_TYPE_AG;
isa_sex = 1;
}
#endif
}
EXPORT_SYMBOL(strcpy);
+char *strcat(char *dest, const char *src)
+{
+ return __kernel_strcpy(dest + __kernel_strlen(dest), src);
+}
+EXPORT_SYMBOL(strcat);
+
void *memset(void *s, int c, size_t count)
{
void *xs = s;
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
{
return au1x00_clock;
}
+EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
+void au1xxx_ddma_del_device(u32 devid)
+{
+ dbdev_tab_t *p = find_dbdev_id(devid);
+
+ if (p != NULL) {
+ memset(p, 0, sizeof(dbdev_tab_t));
+ p->dev_id = ~0;
+ }
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
/* Allocate a channel and return a non-zero descriptor if successful. */
u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#ifdef CONFIG_KALLSYMS
printk("\n");
#endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
- if (IS_KVA01(sp)) {
- while (!kstack_end(sp)) {
- addr = *sp++;
- if (__kernel_text_address(addr))
- print_ip_sym(addr);
+ while (!kstack_end(sp)) {
+ unsigned long __user *p =
+ (unsigned long __user *)(unsigned long)sp++;
+ if (__get_user(addr, p)) {
+ printk(" (Bad stack address)");
+ break;
}
- printk("\n");
+ if (__kernel_text_address(addr))
+ print_ip_sym(addr);
}
+ printk("\n");
}
#ifdef CONFIG_KALLSYMS
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
static void mips_timer_dispatch(void)
{
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
- /*
- * Yes, this is very tacky, won't work as expected with SMTC and
- * dyntick will break it,
- * but it gives me a nice warm feeling during debug
- */
-#define LEDBAR 0xbf000408
- if (tickcount_this_cpu++ >= HZ) {
- tickcount_this_cpu = 0;
- change_bit(smp_processor_id(), &ledbitmask);
- smp_wmb(); /* Make sure every one else sees the change */
- /* This will pick up any recent changes made by other CPU's */
- *(unsigned int *)LEDBAR = ledbitmask;
- }
-#endif
do_IRQ(mips_cpu_timer_irq);
}
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_clear_store / cache_line_size) *
- cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+ * cache_line_size : 0;
while (off) {
build_clear_pref(&buf, -off);
off -= cache_line_size;
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
off -= cache_line_size;
static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
- /* Found by experiment: R4600 v2.0 needs this, too. */
+ /* Found by experiment: R4600 v2.0/R4700 needs this, too. */
case CPU_R4600:
+ case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
#include <asm/sn/intr.h>
#include <asm/sn/sn0/hub.h>
+/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+ if (size == 1 && where == 0x3d)
+ return 0x01;
+ else if (size == 2 && where == 0x3c)
+ return 0x0100;
+ else if (size == 4 && where == 0x3c)
+ return 0x00000100;
+
+ return 0;
+}
+
/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
static int num_bridges = 0;
bridge_t *bridge;
int slot;
+ extern int pci_probe_only;
+
+ pci_probe_only = 1;
printk("a bridge\n");
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+ bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
/*
* Hmm... IRIX sets additional bits in the address which
return NASID_TO_COMPACT_NODEID(get_nasid());
}
-/* Extracted from the IOC3 meta driver. FIXME. */
-static inline void ioc3_sio_init(void)
-{
- struct ioc3 *ioc3;
- nasid_t nid;
- long loops;
-
- nid = get_nasid();
- ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
- ioc3->sscr_a = 0; /* PIO mode for uarta. */
- ioc3->sscr_b = 0; /* PIO mode for uartb. */
- ioc3->sio_iec = ~0;
- ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
- loops=1000000; while(loops--);
- ioc3->sregs.uarta.iu_fcr = 0;
- ioc3->sregs.uartb.iu_fcr = 0;
- loops=1000000; while(loops--);
-}
-
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
panic("Kernel compiled for N mode.");
#endif
- ioc3_sio_init();
ioc3_eth_init();
per_cpu_init();
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
-#define SLOT_IGNORED 0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
struct node_data *__node_data[MAX_COMPACT_NODES];
return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
}
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
- return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
- return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
- pfn_t slot_psize;
- int slot;
-
- /*
- * Start at the top slot. When we find a slot with memory in it,
- * that's the winner.
- */
- for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
- if ((slot_psize = slot_getsize(node, slot))) {
- if (slot_psize == SLOT_IGNORED)
- continue;
- /* Return the basepfn + the slot size, minus 1. */
- return slot_getbasepfn(node, slot) + slot_psize - 1;
- }
- }
-
- /*
- * If there's no memory on the node, return 0. This is likely
- * to cause problems.
- */
- return 0;
-}
-
static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
{
nasid_t nasid;
static void __init szmem(void)
{
pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */
- int slot, ignore;
+ int slot;
cnodeid_t node;
num_physpages = 0;
for_each_online_node(node) {
- ignore = nodebytes = 0;
+ nodebytes = 0;
for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
slot_psize = slot_psize_compute(node, slot);
if (slot == 0)
* kernel text.
*/
nodebytes += (1LL << SLOT_SHIFT);
+
+ if (!slot_psize)
+ continue;
+
if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
- (slot0sz << PAGE_SHIFT))
- ignore = 1;
- if (ignore && slot_psize) {
+ (slot0sz << PAGE_SHIFT)) {
printk("Ignoring slot %d onwards on node %d\n",
slot, node);
- slot_psize_cache[node][slot] = SLOT_IGNORED;
slot = MAX_MEM_SLOTS;
continue;
}
num_physpages += slot_psize;
- slot_psize_cache[node][slot] =
- (unsigned short) slot_psize;
- if (slot_psize)
- slot_lastfilled_cache[node] = slot;
+ add_active_range(node, slot_getbasepfn(node, slot),
+ slot_getbasepfn(node, slot) + slot_psize);
}
}
}
static void __init node_mem_init(cnodeid_t node)
{
pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
- pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
pfn_t slot_freepfn = node_getfirstfree(node);
- struct pglist_data *pd;
unsigned long bootmap_size;
+ pfn_t start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
/*
* Allocate the node data structures on the node first.
*/
__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
- pd = NODE_DATA(node);
- pd->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
cpus_clear(hub_data(node)->h_cpus);
sizeof(struct hub_data));
bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
- slot_firstpfn, slot_lastpfn);
- free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
- (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
BOOTMEM_DEFAULT);
+ sparse_memory_present_with_active_regions(node);
}
/*
pagetable_init();
for_each_online_node(node) {
- pfn_t start_pfn = slot_getbasepfn(node, 0);
- pfn_t end_pfn = node_getmaxclick(node) + 1;
+ pfn_t start_pfn, end_pfn;
- zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
- free_area_init_node(node, NODE_DATA(node),
- zones_size, start_pfn, NULL);
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
}
void __init mem_init(void)
high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
for_each_online_node(node) {
- unsigned slot, numslots;
- struct page *end, *p;
-
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
- /*
- * We need to manually do the other slots.
- */
- numslots = node_getlastslot(node);
- for (slot = 1; slot <= numslots; slot++) {
- p = nid_page_nr(node, slot_getbasepfn(node, slot) -
- slot_getbasepfn(node, 0));
-
- /*
- * Free valid memory in current slot.
- */
- for (end = p + slot_getsize(node, slot); p < end; p++) {
- /* if (!page_is_ram(pgnr)) continue; */
- /* commented out until page_is_ram works */
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- totalram_pages++;
- }
- }
}
totalram_pages -= setup_zero_pages(); /* This comes from node 0 */
static void __cpuinit ip27_init_secondary(void)
{
per_cpu_init();
- local_irq_enable();
}
static void __cpuinit ip27_smp_finish(void)
{
+ extern void hub_rt_clock_event_init(void);
+
+ hub_rt_clock_event_init();
+ local_irq_enable();
}
static void __init ip27_cpus_done(void)
int rt_timer_irq;
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
+
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
- struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int slice = cputoslice(cpu);
/*
#define NSEC_PER_CYCLE 800
#define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE)
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
- cd->name = "HUB-RT",
- cd->features = CLOCK_EVT_FEAT_ONESHOT,
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, CYCLES_PER_SEC);
cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- cd->rating = 200,
- cd->irq = irq,
- cd->cpumask = cpumask_of_cpu(cpu),
- cd->rating = 300,
- cd->set_next_event = rt_next_event,
- cd->set_mode = rt_set_mode,
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = rt_next_event;
+ cd->set_mode = rt_set_mode;
clockevents_register_device(cd);
}
{
hub_rt_clocksource_init();
hub_rt_clock_event_global_init();
+ hub_rt_clock_event_init();
}
void __cpuinit cpu_time_init(void)
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
- hub_rt_clock_event_init();
set_c0_status(SRB_TIMOCLK);
}
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#include <asm/pgalloc.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
mktree
uImage
cuImage.*
+dtbImage.*
treeImage.*
zImage
+zImage.initrd
zImage.bin.*
zImage.chrp
zImage.coff
-zImage.coff.lds
-zImage.ep*
+zImage.holly
zImage.iseries
zImage.*lds
zImage.miboot
zImage.pmac
zImage.pseries
-zImage.redboot*
-zImage.sandpoint
-zImage.vmode
zconf.h
zlib.h
zutil.h
#include "reg.h"
#include "dcr.h"
+static unsigned long chip_11_errata(unsigned long memsize)
+{
+ unsigned long pvr;
+
+ pvr = mfpvr();
+
+ switch (pvr & 0xf0000ff0) {
+ case 0x40000850:
+ case 0x400008d0:
+ case 0x200008d0:
+ memsize -= 4096;
+ break;
+ default:
+ break;
+ }
+
+ return memsize;
+}
+
/* Read the 4xx SDRAM controller to get size of system memory. */
void ibm4xx_sdram_fixup_memsize(void)
{
memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
}
+ memsize = chip_11_errata(memsize);
dt_fixup_memory(0, memsize);
}
bank = 4; /* 4 banks */
memsize = cs * (1 << (col+row)) * bank * dpath;
+ memsize = chip_11_errata(memsize);
dt_fixup_memory(0, memsize);
}
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
- empty.c zImage zImage.coff.lds zImage.ps3.lds zImage.lds
+ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
-image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
-image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads
+image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads
image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
otheros.bld *.dtb
# clean up files cached by wrapper
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8349-dma";
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <0x47 8>;
cell-index = <0>;
dma-channel@0 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@80 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@100 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
dma-channel@180 {
- compatible = "fsl,mpc8349-dma-channel";
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
};
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:37 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:00:44 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:18 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:45 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:36 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-CONFIG_PCNET32_NAPI=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ISERIES_VETH=y
# CONFIG_FDDI is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
#
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:21 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:02:24 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_DCCP=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:24 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:02 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_PPC_CELLEB=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_CELLEB=y
#
# Cell Broadband Engine options
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=y
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-CONFIG_PATA_SCC=y
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_HVCS=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:28 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:28 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
-CONFIG_EHEA=m
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
dev->cfg_size = pci_cfg_space_size(dev);
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2"
+reloc_got2 kernstart_addr"
NM="$1"
OBJ="$2"
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
#endif
+ unsigned long msr = regs->msr;
long err = 0;
flush_fp_to_thread(current);
/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
* contains valid data.
*/
- regs->msr |= MSR_VEC;
+ msr |= MSR_VEC;
}
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
+ err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
/*
- * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
return ret;
}
#endif /* CONFIG_MEMORY_HOTREMOVE */
+#endif /* CONFIG_MEMORY_HOTPLUG */
/*
* walk_memory_resource() needs to make sure there is no holes in a given
}
EXPORT_SYMBOL_GPL(walk_memory_resource);
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
void show_mem(void)
{
unsigned long total = 0, reserved = 0;
return;
}
- map_page(address, phys, flags);
+ map_page(address, phys, pgprot_val(flags));
fixmaps++;
}
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
unsigned long flags;
const struct of_device_id *match)
{
struct mpc52xx_gpiochip *chip;
- struct mpc52xx_gpio_wkup *regs;
+ struct mpc52xx_gpio_wkup __iomem *regs;
struct of_gpio_chip *ofchip;
int ret;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
{
struct mpc52xx_gpiochip *chip;
struct of_gpio_chip *ofchip;
- struct mpc52xx_gpio *regs;
+ struct mpc52xx_gpio __iomem *regs;
int ret;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt *regs = mm_gc->regs;
+ struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
out_be32(®s->mode, 0x04);
static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- u##size *dst = b; \
+ __le##size *dst = b; \
for (; c != 0; c--, dst++) \
*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
scc_pciex_io_flush(bus); \
unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- const u##size *src = b; \
+ const __le##size *src = b; \
for (; c != 0; c--, src++) \
__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
}
+#define __le8 u8
#define cpu_to_le8(x) (x)
#define le8_to_cpu(x) (x)
PCIEX_PIO_FUNC(8, b)
*/
struct i2c_driver_device {
char *of_device;
- char *i2c_driver;
char *i2c_type;
};
static struct i2c_driver_device i2c_devices[] __initdata = {
- {"dallas,ds1338", "rtc-ds1307", "ds1338"},
+ {"dallas,ds1338", "ds1338"},
};
static int __init find_i2c_driver(struct device_node *node,
for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
if (!of_device_is_compatible(node, i2c_devices[i].of_device))
continue;
- if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver,
- KOBJ_NAME_LEN) >= KOBJ_NAME_LEN ||
- strlcpy(info->type, i2c_devices[i].i2c_type,
+ if (strlcpy(info->type, i2c_devices[i].i2c_type,
I2C_NAME_SIZE) >= I2C_NAME_SIZE)
return -ENOMEM;
return 0;
return result;
}
+ lmb_add(start_addr, map.r1.size);
+ lmb_analyze();
+
result = online_pages(start_pfn, nr_pages);
if (result)
{"dallas,ds1339", "ds1339"},
{"dallas,ds1340", "ds1340"},
{"stm,m41t00", "m41t00"},
- {"dallas,ds1374", "rtc-ds1374"},
+ {"dallas,ds1374", "ds1374"},
};
static int __init of_find_i2c_driver(struct device_node *node,
unsigned long flags;
u32 reg;
+ if (!mpic)
+ return;
+
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi) {
reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
spin_unlock_irqrestore(&mpic_lock, flags);
}
-unsigned int mpic_irq_get_priority(unsigned int irq)
-{
- unsigned int is_ipi;
- struct mpic *mpic = mpic_find(irq, &is_ipi);
- unsigned int src = mpic_irq_to_hw(irq);
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&mpic_lock, flags);
- if (is_ipi)
- reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
- else
- reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
- spin_unlock_irqrestore(&mpic_lock, flags);
- return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
-}
-
void mpic_setup_this_cpu(void)
{
#ifdef CONFIG_SMP
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
EXPORT_SYMBOL(machine_check_exception);
config ARCH_SPARSEMEM_DEFAULT
def_bool y
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
source "mm/Kconfig"
comment "I/O subsystem configuration"
P_DEBUG(" -= Work Queue =-\n");
i = 0;
+ get_online_cpus();
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
}
}
spin_unlock(&appldata_ops_lock);
+ put_online_cpus();
}
/*
len = *lenp;
if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len))
return -EFAULT;
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
if (buf[0] == '1')
__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
else if (buf[0] == '0')
__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
out:
*lenp = len;
*ppos += len;
return -EINVAL;
}
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
appldata_interval = interval;
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
interval);
return -ENOMEM;
}
+ get_online_cpus();
for_each_online_cpu(i)
appldata_online_cpu(i);
+ put_online_cpus();
/* Register cpu hotplug notifier */
register_hotcpu_notifier(&appldata_nb);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Wed Apr 30 11:07:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Fri May 30 09:49:33 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
# CONFIG_CMM is not set
+# CONFIG_PAGE_STATES is not set
CONFIG_VIRT_TIMER=y
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
#
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+CONFIG_ACCESSIBILITY=y
#
# File systems
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_CHECK=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
[INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, /* e.g. madbr */
[INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
[INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
- [INSTR_RRF_R0RR] = { 0xff, R_24,R_28,R_16,0,0,0 }, /* e.g. idte */
+ [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, /* e.g. idte */
[INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, /* e.g. fixr */
[INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, /* e.g. cfebr */
[INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, /* e.g. sske */
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
#ifdef CONFIG_HOTPLUG_CPU
-int smp_rescan_cpus(void)
+int __ref smp_rescan_cpus(void)
{
cpumask_t newcpus;
int cpu;
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ unsigned long i, total = 0, reserved = 0;
+ unsigned long shared = 0, cached = 0;
+ unsigned long flags;
struct page *page;
+ pg_data_t *pgdat;
printk("Mem-info:\n");
show_free_areas();
- i = max_mapnr;
- while (i-- > 0) {
- if (!pfn_valid(i))
- continue;
- page = pfn_to_page(i);
- total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (page_count(page))
- shared += page_count(page) - 1;
+ for_each_online_pgdat(pgdat) {
+ pgdat_resize_lock(pgdat, &flags);
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ if (!pfn_valid(pgdat->node_start_pfn + i))
+ continue;
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ pgdat_resize_unlock(pgdat, &flags);
}
- printk("%d pages of RAM\n", total);
- printk("%d reserved pages\n", reserved);
- printk("%d pages shared\n", shared);
- printk("%d pages swap cached\n", cached);
-
- printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
- printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK));
- printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
- printk("%lu pages slab\n",
- global_page_state(NR_SLAB_RECLAIMABLE) +
- global_page_state(NR_SLAB_UNRECLAIMABLE));
- printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE));
+ printk("%ld pages of RAM\n", total);
+ printk("%ld reserved pages\n", reserved);
+ printk("%ld pages shared\n", shared);
+ printk("%ld pages swap cached\n", cached);
}
/*
static LIST_HEAD(mem_segs);
-static pud_t *vmem_pud_alloc(void)
+static void __ref *vmem_alloc_pages(unsigned int order)
+{
+ if (slab_is_available())
+ return (void *)__get_free_pages(GFP_KERNEL, order);
+ return alloc_bootmem_pages((1 << order) * PAGE_SIZE);
+}
+
+static inline pud_t *vmem_pud_alloc(void)
{
pud_t *pud = NULL;
#ifdef CONFIG_64BIT
- pud = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+ pud = vmem_alloc_pages(2);
if (!pud)
return NULL;
clear_table((unsigned long *) pud, _REGION3_ENTRY_EMPTY, PAGE_SIZE * 4);
return pud;
}
-static pmd_t *vmem_pmd_alloc(void)
+static inline pmd_t *vmem_pmd_alloc(void)
{
pmd_t *pmd = NULL;
#ifdef CONFIG_64BIT
- pmd = vmemmap_alloc_block(PAGE_SIZE * 4, 0);
+ pmd = vmem_alloc_pages(2);
if (!pmd)
return NULL;
clear_table((unsigned long *) pmd, _SEGMENT_ENTRY_EMPTY, PAGE_SIZE * 4);
if (pte_none(*pt_dir)) {
unsigned long new_page;
- new_page =__pa(vmemmap_alloc_block(PAGE_SIZE, 0));
+ new_page =__pa(vmem_alloc_pages(0));
if (!new_page)
goto out;
pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
*pt_dir = pte;
}
}
+ memset(start, 0, nr * sizeof(struct page));
ret = 0;
out:
flush_tlb_kernel_range(start_addr, end_addr);
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && (MMU || BROKEN)
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
+cflags-y += $(call cc-option,-mno-fdpic)
+
#
# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
# support it, while -Wa,-dsp by itself limits the range of usable opcodes
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
#include <linux/pm.h>
.resource = heartbeat_resources,
};
-static struct plat_serial8250_port uart_platform_data[] = {
- {
- .membase = (void __iomem *)0xb3e30000,
- .mapbase = 0xb3e30000,
- .iotype = UPIO_MEM,
- .irq = IRQ_VOYAGER,
- .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
- .regshift = 2,
- .uartclk = (9600 * 16),
- },
- { 0 },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart_platform_data,
- },
-};
-
static struct resource sm501_resources[] = {
[0] = {
.start = 0x10000000,
};
static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = SM501_USE_USB_HOST,
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
};
static struct sm501_platdata sm501_platform_data = {
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
- &uart_device,
&sm501_device,
&heartbeat_device,
&spi_sh_sci_device,
sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-
- /*
- * Power Mode Gate - Enable UART0
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
}
/*
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Wed Feb 6 21:52:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Thu May 22 14:30:07 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SH_MOBILE=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 20:27:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
#
# System type
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
#
# Networking
#
# Networking options
#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x20000000
CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_SH=y
# CONFIG_UIO is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
reg += 8;
}
}
+ }
#endif
/*
switch (prr) {
case 0x50:
+ case 0x51:
boot_cpu_data.type = CPU_SH7723;
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
break;
static void master_clk_init(struct clk *clk)
{
- clk->rate *= 36;
+ clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
}
static struct clk_ops sh7785_master_clk_ops = {
static struct resource usbf_resources[] = {
[0] = {
- .name = "USBF",
+ .name = "m66592_udc",
.start = 0x04480000,
.end = 0x044800FF,
.flags = IORESOURCE_MEM,
static struct plat_sci_port sci_platform_data[] = {
{
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ },{
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ },{
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ },{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.resource = rtc_resources,
};
+static struct resource sh7723_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh7723_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
+ .resource = sh7723_usb_host_resources,
+};
+
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
+ &sh7723_usb_host_device,
};
static int __init sh7723_devices_setup(void)
INTC_VECT(VIO_VOUI,0x8E0),
INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x920),
+ INTC_VECT(VPU_VPUI,0x980),
INTC_VECT(TPU_TPUI,0x9A0),
INTC_VECT(ADC_ADI,0x9E0),
INTC_VECT(USB_USI0,0xA20),
{
register_intc_controller(&intc_desc);
}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
+ NULL, irq_mask_registers, irq_prio_registers,
+ irq_sense_registers);
+
/* External interrupt pins in IRL mode */
static struct intc_vect irl_vectors[] __initdata = {
};
static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, NULL, irl7654_mask_registers, NULL, NULL);
+ NULL, irl7654_mask_registers, NULL, NULL);
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, NULL, irl3210_mask_registers, NULL, NULL);
+ NULL, irl3210_mask_registers, NULL, NULL);
#define INTC_ICR0 0xffd00000
#define INTC_INTMSK0 0xffd00044
-/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
- *
- * linux/arch/sh/entry.S
- *
+/*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
.align 2
syscall_badsys: ! Bad syscall number
+ get_current_thread_info r8, r0
mov #-ENOSYS, r0
bra resume_userspace
mov.l r0, @(OFF_R0,r15) ! Return value
mov.l 1f, r8
add r0, r8
mov.l @r8, r8
- jmp @r8
+ jsr @r8
+ nop
+ bra __restore_all
nop
.align 2
.long 0 /* RAMDISK_FLAGS */
.long 0x0200 /* ORIG_ROOT_DEV */
.long 1 /* LOADER_TYPE */
- .long 0x00360000 /* INITRD_START */
- .long 0x000a0000 /* INITRD_SIZE */
+ .long 0x00000000 /* INITRD_START */
+ .long 0x00000000 /* INITRD_SIZE */
#ifdef CONFIG_32BIT
.long 0x53453f00 + 32 /* "SE?" = 32 bit */
#else
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct pt_regs fake_swapper_regs;
}
for (i = 0; i < count; i++) {
ch = *mem++;
- *buf++ = highhex(ch);
- *buf++ = lowhex(ch);
+ buf = pack_hex_byte(buf, ch);
}
*buf = 0;
return (buf);
/* '#' Separator, put high and low components of checksum */
put_debug_char('#');
- put_debug_char(highhex(checksum));
- put_debug_char(lowhex(checksum));
+ put_debug_char(hex_asc_hi(checksum));
+ put_debug_char(hex_asc_lo(checksum));
}
while ((get_debug_char()) != '+'); /* While no ack */
}
static void send_signal_msg(const int signum)
{
out_buffer[0] = 'S';
- out_buffer[1] = highhex(signum);
- out_buffer[2] = lowhex(signum);
+ out_buffer[1] = hex_asc_hi(signum);
+ out_buffer[2] = hex_asc_lo(signum);
out_buffer[3] = 0;
put_packet(out_buffer);
}
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <asm/unaligned.h>
void *module_alloc(unsigned long size)
{
return 0;
}
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
- void *__s = &(sw), *__t = &(tw); \
- unsigned short *__s2 = __s, *__t2 = __t; \
- unsigned char *__s1 = __s, *__t1 = __t; \
- switch ((align)) \
- { \
- case 0: \
- *(unsigned long *) __t = *(unsigned long *) __s; \
- break; \
- case 2: \
- *__t2++ = *__s2++; \
- *__t2 = *__s2; \
- break; \
- default: \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1 = *__s1; \
- break; \
- } \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); }
-#endif
-
int apply_relocate_add(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
Elf32_Addr relocation;
uint32_t *location;
uint32_t value;
- int align;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend;
- align = (int)location & 3;
#ifdef CONFIG_SUPERH64
/* For text addresses, bit2 of the st_other field indicates
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_DIR32:
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_REL32:
relocation = (relocation - (Elf32_Addr) location);
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_IMM_LOW16:
*location = (*location & ~0x3fffc00) |
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ printk(KERN_NOTICE "Boot params:\n"
+ "... MOUNT_ROOT_RDONLY - %08lx\n"
+ "... RAMDISK_FLAGS - %08lx\n"
+ "... ORIG_ROOT_DEV - %08lx\n"
+ "... LOADER_TYPE - %08lx\n"
+ "... INITRD_START - %08lx\n"
+ "... INITRD_SIZE - %08lx\n",
+ MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
+ ORIG_ROOT_DEV, LOADER_TYPE,
+ INITRD_START, INITRD_SIZE);
+
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
#include <linux/kdebug.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long addr)
{
- return addr >= PAGE_OFFSET;
+ unsigned short opcode;
+
+ if (addr < PAGE_OFFSET)
+ return 0;
+ if (probe_kernel_address((u16 *)addr, opcode))
+ return 0;
+
+ return opcode == TRAPA_BUG_OPCODE;
}
#endif
mov.l r3,@-r0 ! 30 LS
#else
-3: mov r1,r3 ! OPQR
+3: mov r7,r3 ! OPQR
shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
+ mov.l @(r0,r5),r7 ! KLMN
+ mov r7,r6
shll16 r6
shll8 r6 ! Nxxx
or r6,r3 ! NOPQ
movca.l r0,@r1 ! 40 LS (latency=3-7)
add #-0x1c, r1 ! 50 EX
- mov.l r3, @(0x1c,r1) ! 33 LS
+ mov.l r3, @(0x18,r1) ! 33 LS
xtrct r11, r10 ! 48 EX
- mov.l r6, @(0x18,r1) ! 33 LS
+ mov.l r6, @(0x14,r1) ! 33 LS
xtrct r12, r11 ! 48 EX
- mov.l r7, @(0x14,r1) ! 33 LS
+ mov.l r7, @(0x10,r1) ! 33 LS
- mov.l r8, @(0x10,r1) ! 33 LS
- add #-0x3e, r5 ! 50 EX
+ mov.l r8, @(0x0c,r1) ! 33 LS
+ add #-0x1e, r5 ! 50 EX
- mov.l r9, @(0x0c,r1) ! 33 LS
+ mov.l r9, @(0x08,r1) ! 33 LS
cmp/eq r2,r1 ! 54 MT
- mov.l r10, @(0x08,r1) ! 33 LS
+ mov.l r10, @(0x04,r1) ! 33 LS
bf/s 2b ! 109 BR
- mov.l r11, @(0x04,r1) ! 33 LS
+ mov.l r11, @(0x00,r1) ! 33 LS
#endif
mov.l @r15+, r12
-# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
-# $Id: Makefile,v 1.10 2000/02/23 08:17:46 jj Exp $
# Makefile for the Sparc boot stuff.
#
# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: btfixupprep.c,v 1.6 2001/08/22 15:27:47 davem Exp $
+/*
Simple utility to prepare vmlinux image for sparc.
Resolves all BTFIXUP uses and settings and creates
a special .s object to link to the image.
-/* $Id: piggyback.c,v 1.4 2000/12/05 00:48:57 anton Exp $
+/*
Simple utility to make a single-image install kernel with initial ramdisk
for Sparc tftpbooting without need to set up nfs.
-/* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $
+/*
* ebus.c: PCI to EBus bridge device.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
-/* $Id: etrap.S,v 1.31 2000/01/08 16:38:18 anton Exp $
+/*
* etrap.S: Sparc trap window preparation for entry into the
* Linux kernel.
*
-/* $Id: head.S,v 1.105 2001/08/12 09:08:56 davem Exp $
+/*
* head.S: The initial boot code for the Sparc port of Linux.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: idprom.c,v 1.24 1999/08/31 06:54:20 davem Exp $
+/*
* idprom.c: Routines to load the idprom into kernel addresses and
* interpret the data contained within.
*
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
-/* $Id: ioport.c,v 1.45 2001/10/30 04:54:21 davem Exp $
+/*
* ioport.c: Simple io mapping allocator.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: irq.c,v 1.114 2001/12/11 04:55:51 davem Exp $
+/*
* arch/sparc/kernel/irq.c: Interrupt request handling routines. On the
* Sparc the IRQs are basically 'cast in stone'
* and you are supposed to probe the prom's device
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
add_timer(&led_blink_timer);
}
-static int led_read_proc(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
+static int led_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
-
if (get_auxio() & AUXIO_LED)
- len = sprintf(buf, "on\n");
+ seq_puts(m, "on\n");
else
- len = sprintf(buf, "off\n");
+ seq_puts(m, "off\n");
+ return 0;
+}
- return len;
+static int led_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, led_proc_show, NULL);
}
-static int led_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static ssize_t led_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
char *buf = NULL;
return count;
}
+static const struct file_operations led_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = led_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = led_proc_write,
+};
+
static struct proc_dir_entry *led;
#define LED_VERSION "0.1"
init_timer(&led_blink_timer);
led_blink_timer.function = led_blink;
- led = create_proc_entry("led", 0, NULL);
+ led = proc_create("led", 0, NULL, &led_proc_fops);
if (!led)
return -ENOMEM;
-
- led->read_proc = led_read_proc; /* reader function */
- led->write_proc = led_write_proc; /* writer function */
led->owner = THIS_MODULE;
printk(KERN_INFO
-/* $Id: muldiv.c,v 1.5 1997/12/15 20:07:20 ecd Exp $
+/*
* muldiv.c: Hardware multiply/division illegal instruction trap
* for sun4c/sun4 (which do not have those instructions)
*
-/* $Id: rtrap.S,v 1.58 2002/01/31 03:30:05 davem Exp $
+/*
* rtrap.S: Return from Sparc trap low-level code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $
+/*
* linux/arch/sparc/kernel/setup.c
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: sparc_ksyms.c,v 1.107 2001/07/17 16:17:33 anton Exp $
+/*
* arch/sparc/kernel/ksyms.c: Sparc specific ksyms support.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: sun4d_irq.c,v 1.29 2001/12/11 04:55:51 davem Exp $
+/*
* arch/sparc/kernel/sun4d_irq.c:
* SS1000/SC2000 interrupt handling.
*
-/* $Id: trampoline.S,v 1.14 2002/01/11 08:45:38 davem Exp $
+/*
* trampoline.S: SMP cpu boot-up trampoline code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: traps.c,v 1.64 2000/09/03 15:00:49 anton Exp $
+/*
* arch/sparc/kernel/traps.c
*
* Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: unaligned.c,v 1.23 2001/12/21 00:54:31 davem Exp $
+/*
* unaligned.c: Unaligned load/store trap handling with special
* cases for the kernel to do them more quickly.
*
-/* $Id: wof.S,v 1.40 2000/01/08 16:38:18 anton Exp $
+/*
* wof.S: Sparc window overflow handler.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: wuf.S,v 1.39 2000/01/08 16:38:18 anton Exp $
+/*
* wuf.S: Window underflow trap handler for the Sparc.
*
* Copyright (C) 1995 David S. Miller
-# $Id: Makefile,v 1.35 2000/12/15 00:41:18 davem Exp $
# Makefile for Sparc library files..
#
-/* $Id: ashldi3.S,v 1.2 1999/11/19 04:11:46 davem Exp $
+/*
* ashldi3.S: GCC emits these for certain drivers playing
* with long longs.
*
-/* $Id: ashrdi3.S,v 1.4 1999/11/19 04:11:49 davem Exp $
+/*
* ashrdi3.S: The filesystem code creates all kinds of references to
* this little routine on the sparc with gcc.
*
-/* $Id: blockops.S,v 1.8 1998/01/30 10:58:44 jj Exp $
+/*
* blockops.S: Common block zero optimized routines.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: locks.S,v 1.16 2000/02/26 11:02:47 anton Exp $
+/*
* locks.S: SMP low-level lock primitives on Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: lshrdi3.S,v 1.1 1999/03/21 06:37:45 davem Exp $ */
.globl __lshrdi3
__lshrdi3:
-/* $Id: memscan.S,v 1.4 1996/09/08 02:01:20 davem Exp $
+/*
* memscan.S: Optimized memscan for the Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: mul.S,v 1.4 1996/09/30 02:22:32 davem Exp $
+/*
* mul.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: rem.S,v 1.7 1996/09/30 02:22:34 davem Exp $
+/*
* rem.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: rwsem.S,v 1.5 2000/05/09 17:40:13 davem Exp $
+/*
* Assembly part of rw semaphores.
*
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
-/* $Id: sdiv.S,v 1.6 1996/10/02 17:37:00 davem Exp $
+/*
* sdiv.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: strncmp.S,v 1.2 1996/09/09 02:47:20 davem Exp $
+/*
* strncmp.S: Hand optimized Sparc assembly of GCC output from GNU libc
* generic strncmp routine.
*/
-/* $Id: udiv.S,v 1.4 1996/09/30 02:22:38 davem Exp $
+/*
* udiv.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: umul.S,v 1.4 1996/09/30 02:22:39 davem Exp $
+/*
* umul.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: urem.S,v 1.4 1996/09/30 02:22:42 davem Exp $
+/*
* urem.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
-/* $Id: ashldi3.S,v 1.1 1998/04/06 16:09:28 jj Exp $
+/*
* ashldi3.S: Math-emu code creates all kinds of references to
* this little routine on the sparc with gcc.
*
-# $Id: Makefile,v 1.38 2000/12/15 00:41:22 davem Exp $
# Makefile for the linux Sparc-specific parts of the memory manager.
#
-/* $Id: fault.c,v 1.122 2001/11/17 07:19:26 davem Exp $
+/*
* fault.c: Page fault handlers for the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: generic.c,v 1.14 2001/12/21 04:56:15 davem Exp $
+/*
* generic.c: Generic Sparc mm routines that are not dependent upon
* MMU type but are Sparc specific.
*
-/* $Id: hypersparc.S,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
* hypersparc.S: High speed Hypersparc mmu/cache operations.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: init.c,v 1.103 2001/11/19 19:03:08 davem Exp $
+/*
* linux/arch/sparc/mm/init.c
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: io-unit.c,v 1.24 2001/12/17 07:05:09 davem Exp $
+/*
* io-unit.c: IO-UNIT specific routines for memory management.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: loadmmu.c,v 1.56 2000/02/08 20:24:21 davem Exp $
+/*
* loadmmu.c: This code loads up all the mm function pointers once the
* machine type has been determined. It also sets the static
* mmu values such as PAGE_NONE, etc.
-/* $Id: nosrmmu.c,v 1.5 1999/11/19 04:11:54 davem Exp $
+/*
* nosrmmu.c: This file is a bunch of dummies for sun4 compiles,
* so that it does not need srmmu and avoid ifdefs.
*
-/* $Id: nosun4c.c,v 1.3 2000/02/14 04:52:36 jj Exp $
+/*
* nosun4c.c: This file is a bunch of dummies for SMP compiles,
* so that it does not need sun4c and avoid ifdefs.
*
-/* $Id: swift.S,v 1.9 2002/01/08 11:11:59 davem Exp $
+/*
* swift.S: MicroSparc-II mmu/cache operations.
*
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
-/* $Id: tsunami.S,v 1.7 2001/12/21 04:56:15 davem Exp $
+/*
* tsunami.S: High speed MicroSparc-I mmu/cache operations.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: viking.S,v 1.19 2001/12/21 04:56:15 davem Exp $
+/*
* viking.S: High speed Viking cache/mmu operations
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
-# $Id: Makefile,v 1.8 2000/12/15 00:41:22 davem Exp $
# Makefile for the Sun Boot PROM interface library under
# Linux.
#
-/* $Id: bootstr.c,v 1.20 2000/02/08 20:24:23 davem Exp $
+/*
* bootstr.c: Boot string/argument acquisition from the PROM.
*
* Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: console.c,v 1.25 2001/10/30 04:54:22 davem Exp $
+/*
* console.c: Routines that deal with sending and receiving IO
* to/from the current console device using the PROM.
*
-/* $Id: devmap.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
* promdevmap.c: Map device/IO areas to virtual addresses.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: devops.c,v 1.13 2000/08/26 02:38:03 anton Exp $
+/*
* devops.c: Device operations using the PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: init.c,v 1.14 2000/01/29 01:09:12 anton Exp $
+/*
* init.c: Initialize internal variables used by the PROM
* library functions.
*
-/* $Id: misc.c,v 1.18 2000/08/26 02:38:03 anton Exp $
+/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
-/* $Id: mp.c,v 1.12 2000/08/26 02:38:03 anton Exp $
+/*
* mp.c: OpenBoot Prom Multiprocessor support routines. Don't call
* these on a UP or else you will halt and catch fire. ;)
*
-/* $Id: palloc.c,v 1.4 1996/04/25 06:09:48 davem Exp $
+/*
* palloc.c: Memory allocation from the Sun PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: ranges.c,v 1.15 2001/12/19 00:29:51 davem Exp $
+/*
* ranges.c: Handle ranges in newer proms for obio/sbus.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: segment.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
* segment.c: Prom routine to map segments in other contexts before
* a standalone is completely mapped. This is for sun4 and
* sun4c architectures only.
-/* $Id: tree.c,v 1.26 2000/08/26 02:38:03 anton Exp $
+/*
* tree.c: Basic device tree traversal/scanning for the Linux
* prom library.
*
-# $Id: Makefile,v 1.52 2002/02/09 19:49:31 davem Exp $
# sparc64/Makefile
#
# Makefile for the architecture dependent flags and dependencies on the
-# $Id: Makefile,v 1.4 1997/12/15 20:08:56 ecd Exp $
# Makefile for the Sparc64 boot stuff.
#
# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: piggyback.c,v 1.2 2000/09/19 14:34:39 anton Exp $
+/*
Simple utility to make a single-image install kernel with initial ramdisk
for Sparc64 tftpbooting without need to set up nfs.
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sat Apr 26 03:11:06 2008
+# Linux kernel version: 2.6.26-rc2
+# Fri May 16 13:36:07 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# ALSA SoC audio for Freescale SOCs
#
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
#
# Open Sound System
#
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_UIO is not set
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
-/* $Id: dtlb_prot.S,v 1.22 2001/04/11 23:40:32 davem Exp $
+/*
* dtlb_prot.S: DTLB protection trap strategy.
* This is included directly into the trap table.
*
-/* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $
+/*
* ebus.c: PCI to EBus bridge device.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
-/* $Id: etrap.S,v 1.46 2002/02/09 19:49:30 davem Exp $
+/*
* etrap.S: Preparing for entry into the kernel on Sparc V9.
*
* Copyright (C) 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: idprom.c,v 1.3 1999/08/31 06:54:53 davem Exp $
+/*
* idprom.c: Routines to load the idprom into kernel addresses and
* interpret the data contained within.
*
#include <asm/processor.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
/* arch/sparc64/kernel/process.c
*
- * Copyright (C) 1995, 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 1996, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1997, 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/elfcore.h>
+#include <linux/sysrq.h>
#include <asm/oplib.h>
#include <asm/uaccess.h>
#include <asm/sstate.h>
#include <asm/reboot.h>
#include <asm/syscalls.h>
+#include <asm/irq_regs.h>
+#include <asm/smp.h>
/* #define VERBOSE_SHOWREGS */
#endif
}
+#ifdef CONFIG_MAGIC_SYSRQ
+struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
+static DEFINE_SPINLOCK(global_reg_snapshot_lock);
+
+static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
+ int this_cpu)
+{
+ flushw_all();
+
+ global_reg_snapshot[this_cpu].tstate = regs->tstate;
+ global_reg_snapshot[this_cpu].tpc = regs->tpc;
+ global_reg_snapshot[this_cpu].tnpc = regs->tnpc;
+ global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
+
+ if (regs->tstate & TSTATE_PRIV) {
+ struct reg_window *rw;
+
+ rw = (struct reg_window *)
+ (regs->u_regs[UREG_FP] + STACK_BIAS);
+ global_reg_snapshot[this_cpu].i7 = rw->ins[6];
+ } else
+ global_reg_snapshot[this_cpu].i7 = 0;
+
+ global_reg_snapshot[this_cpu].thread = tp;
+}
+
+/* In order to avoid hangs we do not try to synchronize with the
+ * global register dump client cpus. The last store they make is to
+ * the thread pointer, so do a short poll waiting for that to become
+ * non-NULL.
+ */
+static void __global_reg_poll(struct global_reg_snapshot *gp)
+{
+ int limit = 0;
+
+ while (!gp->thread && ++limit < 100) {
+ barrier();
+ udelay(1);
+ }
+}
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+ struct thread_info *tp = current_thread_info();
+ struct pt_regs *regs = get_irq_regs();
+#ifdef CONFIG_KALLSYMS
+ char buffer[KSYM_SYMBOL_LEN];
+#endif
+ unsigned long flags;
+ int this_cpu, cpu;
+
+ if (!regs)
+ regs = tp->kregs;
+
+ spin_lock_irqsave(&global_reg_snapshot_lock, flags);
+
+ memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+ this_cpu = raw_smp_processor_id();
+
+ __global_reg_self(tp, regs, this_cpu);
+
+ smp_fetch_global_regs();
+
+ for_each_online_cpu(cpu) {
+ struct global_reg_snapshot *gp = &global_reg_snapshot[cpu];
+ struct thread_info *tp;
+
+ __global_reg_poll(gp);
+
+ tp = gp->thread;
+ printk("%c CPU[%3d]: TSTATE[%016lx] TPC[%016lx] TNPC[%016lx] TASK[%s:%d]\n",
+ (cpu == this_cpu ? '*' : ' '), cpu,
+ gp->tstate, gp->tpc, gp->tnpc,
+ ((tp && tp->task) ? tp->task->comm : "NULL"),
+ ((tp && tp->task) ? tp->task->pid : -1));
+#ifdef CONFIG_KALLSYMS
+ if (gp->tstate & TSTATE_PRIV) {
+ sprint_symbol(buffer, gp->tpc);
+ printk(" TPC[%s] ", buffer);
+ sprint_symbol(buffer, gp->o7);
+ printk("O7[%s] ", buffer);
+ sprint_symbol(buffer, gp->i7);
+ printk("I7[%s]\n", buffer);
+ } else
+#endif
+ {
+ printk(" TPC[%lx] O7[%lx] I7[%lx]\n",
+ gp->tpc, gp->o7, gp->i7);
+ }
+ }
+
+ memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+ spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
+}
+
+static struct sysrq_key_op sparc_globalreg_op = {
+ .handler = sysrq_handle_globreg,
+ .help_msg = "Globalregs",
+ .action_msg = "Show Global CPU Regs",
+};
+
+static int __init sparc_globreg_init(void)
+{
+ return register_sysrq_key('y', &sparc_globalreg_op);
+}
+
+core_initcall(sparc_globreg_init);
+
+#endif
+
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct thread_info *ti = task_thread_info(tsk);
struct task_struct *p, struct pt_regs *regs)
{
struct thread_info *t = task_thread_info(p);
+ struct sparc_stackf *parent_sf;
+ unsigned long child_stack_sz;
char *child_trap_frame;
+ int kernel_thread;
- /* Calculate offset to stack_frame & pt_regs */
- child_trap_frame = task_stack_page(p) + (THREAD_SIZE - (TRACEREG_SZ+STACKFRAME_SZ));
- memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ));
+ kernel_thread = (regs->tstate & TSTATE_PRIV) ? 1 : 0;
+ parent_sf = ((struct sparc_stackf *) regs) - 1;
- t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) | (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
+ /* Calculate offset to stack_frame & pt_regs */
+ child_stack_sz = ((STACKFRAME_SZ + TRACEREG_SZ) +
+ (kernel_thread ? STACKFRAME_SZ : 0));
+ child_trap_frame = (task_stack_page(p) +
+ (THREAD_SIZE - child_stack_sz));
+ memcpy(child_trap_frame, parent_sf, child_stack_sz);
+
+ t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) |
+ (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
(((regs->tstate + 1) & TSTATE_CWP) << TI_FLAG_CWP_SHIFT);
t->new_child = 1;
t->ksp = ((unsigned long) child_trap_frame) - STACK_BIAS;
- t->kregs = (struct pt_regs *)(child_trap_frame+sizeof(struct sparc_stackf));
+ t->kregs = (struct pt_regs *) (child_trap_frame +
+ sizeof(struct sparc_stackf));
t->fpsaved[0] = 0;
- if (regs->tstate & TSTATE_PRIV) {
+ if (kernel_thread) {
+ struct sparc_stackf *child_sf = (struct sparc_stackf *)
+ (child_trap_frame + (STACKFRAME_SZ + TRACEREG_SZ));
+
+ /* Zero terminate the stack backtrace. */
+ child_sf->fp = NULL;
+ t->kregs->u_regs[UREG_FP] =
+ ((unsigned long) child_sf) - STACK_BIAS;
+
/* Special case, if we are spawning a kernel thread from
* a userspace task (via KMOD, NFS, or similar) we must
* disable performance counters in the child because the
t->pcr_reg = 0;
t->flags &= ~_TIF_PERFCTR;
}
- t->kregs->u_regs[UREG_FP] = t->ksp;
t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
- flush_register_windows();
- memcpy((void *)(t->ksp + STACK_BIAS),
- (void *)(regs->u_regs[UREG_FP] + STACK_BIAS),
- sizeof(struct sparc_stackf));
t->kregs->u_regs[UREG_G6] = (unsigned long) t;
t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
} else {
-/* $Id: rtrap.S,v 1.61 2002/02/09 19:49:31 davem Exp $
+/*
* rtrap.S: Preparing for return from trap on Sparc V9.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
brz,pn %g1, kern_rtt_fill
nop
kern_rtt_restore:
+ stw %g0, [%sp + PTREGS_OFF + PT_V9_MAGIC]
restore
retry
-/* $Id: sbus.c,v 1.19 2002/01/23 11:27:32 davem Exp $
+/*
* sbus.c: UltraSparc SBUS controller support.
*
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
-/* $Id: setup.c,v 1.72 2002/02/09 19:49:30 davem Exp $
+/*
* linux/arch/sparc64/kernel/setup.c
*
* Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: signal.c,v 1.60 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/kernel/signal.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
extern unsigned long xcall_flush_tlb_pending;
extern unsigned long xcall_flush_tlb_kernel_range;
extern unsigned long xcall_report_regs;
+#ifdef CONFIG_MAGIC_SYSRQ
+extern unsigned long xcall_fetch_glob_regs;
+#endif
extern unsigned long xcall_receive_signal;
extern unsigned long xcall_new_mmu_context_version;
#ifdef CONFIG_KGDB
smp_cross_call(&xcall_report_regs, 0, 0, 0);
}
+#ifdef CONFIG_MAGIC_SYSRQ
+void smp_fetch_global_regs(void)
+{
+ smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
+}
+#endif
+
/* We know that the window frames of the user have been flushed
* to the stack before we get here because all callers of us
* are flush_tlb_*() routines, and these run after flush_cache_*()
fp = ksp + STACK_BIAS;
thread_base = (unsigned long) tp;
do {
- struct reg_window *rw;
+ struct sparc_stackf *sf;
struct pt_regs *regs;
unsigned long pc;
fp >= (thread_base + THREAD_SIZE))
break;
- rw = (struct reg_window *) fp;
- regs = (struct pt_regs *) (rw + 1);
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+ if (!(regs->tstate & TSTATE_PRIV))
+ break;
pc = regs->tpc;
fp = regs->u_regs[UREG_I6] + STACK_BIAS;
} else {
- pc = rw->ins[7];
- fp = rw->ins[6] + STACK_BIAS;
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
}
if (trace->skip > 0)
-/* $Id: starfire.c,v 1.10 2001/04/14 21:13:45 davem Exp $
+/*
* starfire.c: Starfire/E10000 support.
*
* Copyright (C) 1998 David S. Miller (davem@redhat.com)
-/* $Id: sys32.S,v 1.12 2000/03/24 04:17:37 davem Exp $
+/*
* sys32.S: I-cache tricks for 32-bit compatibility layer simple
* conversions.
*
-/* $Id: trampoline.S,v 1.26 2002/02/09 19:49:30 davem Exp $
+/*
* trampoline.S: Jump start slave processors on sparc64.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
printk("\n");
#endif
do {
- struct reg_window *rw;
+ struct sparc_stackf *sf;
struct pt_regs *regs;
unsigned long pc;
if (fp < (thread_base + sizeof(struct thread_info)) ||
fp >= (thread_base + THREAD_SIZE))
break;
- rw = (struct reg_window *)fp;
- regs = (struct pt_regs *) (rw + 1);
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+ if (!(regs->tstate & TSTATE_PRIV))
+ break;
pc = regs->tpc;
fp = regs->u_regs[UREG_I6] + STACK_BIAS;
} else {
- pc = rw->ins[7];
- fp = rw->ins[6] + STACK_BIAS;
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
}
printk(" [%016lx] ", pc);
-/* $Id: unaligned.c,v 1.24 2002/02/09 19:49:31 davem Exp $
+/*
* unaligned.c: Unaligned load/store trap handling with special
* cases for the kernel to do them more quickly.
*
-/* $Id: PeeCeeI.c,v 1.4 1999/09/06 01:17:35 davem Exp $
+/*
* PeeCeeI.c: The emerging standard...
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: VISsave.S,v 1.6 2002/02/09 19:49:30 davem Exp $
+/*
* VISsave.S: Code for saving FPU register state for
* VIS routines. One should not call this directly,
* but use macros provided in <asm/visasm.h>.
-/* $Id: memcmp.S,v 1.3 2000/03/23 07:51:08 davem Exp $
+/*
* Sparc64 optimized memcmp code.
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: memscan.S,v 1.3 2000/01/31 04:59:10 davem Exp $
+/*
* memscan.S: Optimized memscan for Sparc64.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
-/* $Id: strncmp.S,v 1.2 1997/03/11 17:51:44 jj Exp $
+/*
* Sparc64 optimized strncmp code.
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: strncpy_from_user.S,v 1.6 1999/05/25 16:53:05 jj Exp $
+/*
* strncpy_from_user.S: Sparc64 strncpy from userspace.
*
* Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
-/* $Id: math.c,v 1.11 1999/12/20 05:02:25 davem Exp $
+/*
* arch/sparc64/math-emu/math.c
*
* Copyright (C) 1997,1999 Jakub Jelinek (jj@ultra.linux.cz)
-/* $Id: sfp-util.h,v 1.5 2001/06/10 06:48:46 davem Exp $
+/*
* arch/sparc64/math-emu/sfp-util.h
*
* Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
-# $Id: Makefile,v 1.8 2000/12/14 22:57:25 davem Exp $
# Makefile for the linux Sparc64-specific parts of the memory manager.
#
-/* $Id: fault.c,v 1.59 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: generic.c,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
* generic.c: Generic Sparc mm routines that are not dependent upon
* MMU type but are Sparc specific.
*
-/* $Id: init.c,v 1.209 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/mm/init.c
*
* Copyright (C) 1996-1999 David S. Miller (davem@caip.rutgers.edu)
initrd_start = ramdisk_image;
initrd_end = ramdisk_image + sparc_ramdisk_size;
- lmb_reserve(initrd_start, initrd_end);
+ lmb_reserve(initrd_start, sparc_ramdisk_size);
initrd_start += PAGE_OFFSET;
initrd_end += PAGE_OFFSET;
-/* $Id: ultra.S,v 1.72 2002/02/09 19:49:31 davem Exp $
+/*
* ultra.S: Don't expand these all over the place...
*
- * Copyright (C) 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1997, 2000, 2008 David S. Miller (davem@davemloft.net)
*/
#include <asm/asi.h>
#include <asm/thread_info.h>
#include <asm/cacheflush.h>
#include <asm/hypervisor.h>
+#include <asm/cpudata.h>
/* Basically, most of the Spitfire vs. Cheetah madness
* has to do with the fact that Cheetah does not support
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
+#ifdef CONFIG_MAGIC_SYSRQ
+ .globl xcall_fetch_glob_regs
+xcall_fetch_glob_regs:
+ sethi %hi(global_reg_snapshot), %g1
+ or %g1, %lo(global_reg_snapshot), %g1
+ __GET_CPUID(%g2)
+ sllx %g2, 6, %g3
+ add %g1, %g3, %g1
+ rdpr %tstate, %g7
+ stx %g7, [%g1 + GR_SNAP_TSTATE]
+ rdpr %tpc, %g7
+ stx %g7, [%g1 + GR_SNAP_TPC]
+ rdpr %tnpc, %g7
+ stx %g7, [%g1 + GR_SNAP_TNPC]
+ stx %o7, [%g1 + GR_SNAP_O7]
+ stx %i7, [%g1 + GR_SNAP_I7]
+ sethi %hi(trap_block), %g7
+ or %g7, %lo(trap_block), %g7
+ sllx %g2, TRAP_BLOCK_SZ_SHIFT, %g2
+ add %g7, %g2, %g7
+ ldx [%g7 + TRAP_PER_CPU_THREAD], %g3
+ membar #StoreStore
+ stx %g3, [%g1 + GR_SNAP_THREAD]
+ retry
+#endif /* CONFIG_MAGIC_SYSRQ */
+
#ifdef DCACHE_ALIASING_POSSIBLE
.align 32
.globl xcall_flush_dcache_page_cheetah
-# $Id: Makefile,v 1.7 2000/12/14 22:57:25 davem Exp $
# Makefile for the Sun Boot PROM interface library under
# Linux.
#
-/* $Id: bootstr.c,v 1.6 1999/08/31 06:55:01 davem Exp $
+/*
* bootstr.c: Boot string/argument acquisition from the PROM.
*
* Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: devops.c,v 1.3 1997/10/29 07:43:28 ecd Exp $
+/*
* devops.c: Device operations using the PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: init.c,v 1.10 1999/09/21 14:35:59 davem Exp $
+/*
* init.c: Initialize internal variables used by the PROM
* library functions.
*
-/* $Id: misc.c,v 1.20 2001/09/21 03:17:07 kanoj Exp $
+/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
-/* $Id: p1275.c,v 1.22 2001/10/18 09:40:00 davem Exp $
+/*
* p1275.c: Sun IEEE 1275 PROM low level interface routines
*
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: tree.c,v 1.10 1998/01/10 22:39:00 ecd Exp $
+/*
* tree.c: Basic device tree traversal/scanning for the Linux
* prom library.
*
source "drivers/mtd/Kconfig"
endif
+source "drivers/leds/Kconfig"
+
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
bool
return -EIO;
}
- pri->compiled = kmalloc(sizeof(struct bpf_program),
+ pri->compiled = uml_kmalloc(sizeof(struct bpf_program),
UM_GFP_KERNEL);
if (pri->compiled == NULL) {
printk(UM_KERN_ERR "pcap_open : kmalloc failed\n");
#include "irq_user.h"
#include "irq_kern.h"
#include "ubd_user.h"
-#include "kern_util.h"
#include "os.h"
#include "mem.h"
#include "mem_kern.h"
extern int get_pty(void);
/* sys-$ARCH/task_size.c */
-extern unsigned long os_get_task_size(void);
+extern unsigned long os_get_top_address(void);
#endif
static struct fs_struct init_fs = INIT_FS;
struct mm_struct init_mm = INIT_MM(init_mm);
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
EXPORT_SYMBOL(init_mm);
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(add_sigio_fd);
+EXPORT_SYMBOL(ignore_sigio_fd);
+EXPORT_SYMBOL(deactivate_fd);
+EXPORT_SYMBOL(sigio_broken);
+
#ifdef CONFIG_SMP
/* required for SMP */
if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
- host_task_size = os_get_task_size();
+ host_task_size = os_get_top_address();
/*
* TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
* out
#include <unistd.h>
#include <errno.h>
#include <sched.h>
+#include <linux/limits.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include "kern_constants.h"
* Signals that are OK to receive in the stub - we'll just continue it.
* SIGWINCH will happen when UML is inside a detached screen.
*/
-#define STUB_SIG_MASK (1 << SIGVTALRM)
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
/* Signals that the stub will finish with - anything else is an error */
#define STUB_DONE_MASK (1 << SIGTRAP)
*/
#include <errno.h>
+#include <sys/ptrace.h>
#include <asm/user.h>
#include "kern_constants.h"
#include "longjmp.h"
return ok;
}
-unsigned long os_get_task_size(void)
+unsigned long os_get_top_address(void)
{
struct sigaction sa, old;
unsigned long bottom = 0;
* hosts, but shouldn't hurt otherwise.
*/
unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
- unsigned long test;
+ unsigned long test, original;
- printf("Locating the top of the address space ... ");
+ printf("Locating the bottom of the address space ... ");
fflush(stdout);
/*
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_NODEFER;
if (sigaction(SIGSEGV, &sa, &old)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
- if (!page_ok(bottom)) {
- fprintf(stderr, "Address 0x%x no good?\n",
- bottom << UM_KERN_PAGE_SHIFT);
+ /* Manually scan the address space, bottom-up, until we find
+ * the first valid page (or run out of them).
+ */
+ for (bottom = 0; bottom < top; bottom++) {
+ if (page_ok(bottom))
+ break;
+ }
+
+ /* If we've got this far, we ran out of pages. */
+ if (bottom == top) {
+ fprintf(stderr, "Unable to determine bottom of address "
+ "space.\n");
exit(1);
}
+ printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+ printf("Locating the top of the address space ... ");
+ fflush(stdout);
+
+ original = bottom;
+
/* This could happen with a 4G/4G split */
if (page_ok(top))
goto out;
out:
/* Restore the old SIGSEGV handling */
if (sigaction(SIGSEGV, &old, NULL)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
top <<= UM_KERN_PAGE_SHIFT;
-unsigned long os_get_task_size(unsigned long shift)
+unsigned long os_get_top_address(unsigned long shift)
{
/* The old value of CONFIG_TOP_ADDR */
return 0x7fc0000000;
unsigned long long this_tick = os_nsecs();
int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+ /* Protection against the host's time going backwards */
+ if ((last_tick != 0) && (this_tick < last_tick))
+ this_tick = last_tick;
+
if (last_tick == 0)
last_tick = this_tick - one_tick;
start_usecs = usec;
start_usecs -= skew / UM_NSEC_PER_USEC;
+ if (start_usecs < 0)
+ start_usecs = 0;
+
tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
.tv_usec = start_usecs % UM_USEC_PER_SEC });
interval = ((struct itimerval) { { 0, usec }, tv });
-#include "linux/module.h"
-#include "asm/string.h"
+#include <linux/module.h>
+#include <asm/string.h>
+#include <asm/checksum.h>
/*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
EXPORT_SYMBOL(__memcpy);
+#endif
+EXPORT_SYMBOL(csum_partial);
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM (init_mm);
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
string
- depends on X86_32
- option defconfig_list
- default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
- string
- depends on X86_64
- option defconfig_list
- default "arch/x86/configs/x86_64_defconfig"
+ default "arch/x86/configs/i386_defconfig" if X86_32
+ default "arch/x86/configs/x86_64_defconfig" if X86_64
config GENERIC_LOCKBREAK
config PCI_GODIRECT
bool "Direct"
-config PCI_GOANY
- bool "Any"
-
config PCI_GOOLPC
bool "OLPC"
depends on OLPC
+config PCI_GOANY
+ bool "Any"
+
endchoice
config PCI_BIOS
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
- bool
- depends on PCI && PCI_GOOLPC
- default y
+ def_bool y
+ depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
config PCI_DOMAINS
def_bool y
source "lib/Kconfig.debug"
config NONPROMISC_DEVMEM
- bool "Disable promiscuous /dev/mem"
+ bool "Filter access to /dev/mem"
help
- The /dev/mem file by default only allows userspace access to PCI
- space and the BIOS code and data regions. This is sufficient for
- dosemu and X and all common users of /dev/mem. With this config
- option, you allow userspace access to all of memory, including
- kernel and userspace memory. Accidental access to this is
- obviously disasterous, but specific access can be used by people
- debugging the kernel.
+ If this option is left off, you allow userspace access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to PCI space and the BIOS code and data regions.
+ This is sufficient for dosemu and X and all common users of
+ /dev/mem.
+
+ If in doubt, say Y.
config EARLY_PRINTK
bool "Early printk" if EMBEDDED
if (type & LEFT)
type &= ~ZEROPAD;
if (base < 2 || base > 36)
- return 0;
+ return NULL;
c = (type & ZEROPAD) ? '0' : ' ';
sign = 0;
if (type & SIGN) {
static void __cpuinit acpi_register_lapic(int id, u8 enabled)
{
+ unsigned int ver = 0;
+
if (!enabled) {
++disabled_cpus;
return;
}
- generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+ if (boot_cpu_physical_apicid != -1U)
+ ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+ generic_processor_info(id, ver);
}
static int __init
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
- if (boot_cpu_physical_apicid == -1U)
+ if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+ }
}
static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
*/
void clear_local_APIC(void)
{
- int maxlvt = lapic_get_maxlvt();
+ int maxlvt;
u32 v;
/* APIC hasn't been mapped yet */
if ((ecx > 95) || (ecx == 0) || (eax < ebx))
return -EIO;
- edx = (eax - ebx) / (100 - ecx);
+ edx = ((eax - ebx) * 100) / (100 - ecx);
*low_freq = edx * 1000; /* back to kHz */
dprintk("low frequency is %u kHz\n", *low_freq);
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
- printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
+#ifndef CONFIG_ACPI_PROCESSOR
+ printk(KERN_ERR PFX "ACPI Processor support is required "
+ "for SMP systems but is absent. Please load the "
+ "ACPI Processor module before starting this "
+ "driver.\n");
+#else
+ printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
+ "_PSS objects in a way that Linux understands. "
+ "Please report this to the Linux ACPI maintainers"
+ " and complain to your BIOS vendor.\n");
+#endif
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
+ printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
+ "CPU0. Complain to your BIOS vendor.\n");
kfree(data);
return -ENODEV;
}
void __init init_thread_xstate(void)
{
+ if (!HAVE_HWFP) {
+ xstate_size = sizeof(struct i387_soft_struct);
+ return;
+ }
+
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
#ifdef CONFIG_X86_32
int init_fpu(struct task_struct *tsk)
{
if (tsk_used_math(tsk)) {
- if (tsk == current)
+ if (HAVE_HWFP && tsk == current)
unlazy_fpu(tsk);
return 0;
}
return -ENOMEM;
}
+#ifdef CONFIG_X86_32
+ if (!HAVE_HWFP) {
+ memset(tsk->thread.xstate, 0, xstate_size);
+ finit();
+ set_stopped_child_used_math(tsk);
+ return 0;
+ }
+#endif
+
if (cpu_has_fxsr) {
struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
+ if (!HAVE_HWFP)
+ return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0,
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
set_stopped_child_used_math(target);
+ if (!HAVE_HWFP)
+ return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0, -1);
int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
{
int err;
+ struct task_struct *tsk = current;
- if (HAVE_HWFP) {
- struct task_struct *tsk = current;
-
+ if (HAVE_HWFP)
clear_fpu(tsk);
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+ if (HAVE_HWFP) {
if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
else
#include <asm/desc.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
* have elapsed since the hypervisor wrote the data. So we try to account for
* that with system time
*/
-unsigned long kvm_get_wallclock(void)
+static unsigned long kvm_get_wallclock(void)
{
u32 wc_sec, wc_nsec;
u64 delta;
return ts.tv_sec + 1;
}
-int kvm_set_wallclock(unsigned long now)
+static int kvm_set_wallclock(unsigned long now)
{
return 0;
}
#include <linux/kdebug.h>
#include <linux/scatterlist.h>
#include <linux/iommu-helper.h>
+#include <linux/sysdev.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <asm/mtrr.h>
return aper_base;
}
+static int gart_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+static int gart_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return -EINVAL;
+}
+
+static struct sysdev_class gart_sysdev_class = {
+ .name = "gart",
+ .suspend = gart_suspend,
+ .resume = gart_resume,
+
+};
+
+static struct sys_device device_gart = {
+ .id = 0,
+ .cls = &gart_sysdev_class,
+};
+
/*
* Private Northbridge GATT initialization in case we cannot use the
* AGP driver for some reason.
unsigned aper_base, new_aper_base;
struct pci_dev *dev;
void *gatt;
- int i;
+ int i, error;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
dev = k8_northbridges[i];
enable_gart_translation(dev, __pa(gatt));
}
+
+ error = sysdev_class_register(&gart_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_gart);
+ if (error)
+ panic("Could not register gart_sysdev -- would corrupt data on next suspend");
flush_gart();
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
local_irq_enable();
}
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
- if (force_mwait)
- return 1;
- /* Any C1 states supported? */
- return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
/*
* On SMP it's slightly faster (but much more power-consuming!)
* to poll the ->work.need_resched flag instead of waiting for the
cpu_relax();
}
+/*
+ * mwait selection logic:
+ *
+ * It depends on the CPU. For AMD CPUs that support MWAIT this is
+ * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings
+ * then depend on a clock divisor and current Pstate of the core. If
+ * all cores of a processor are in halt state (C1) the processor can
+ * enter the C1E (C1 enhanced) state. If mwait is used this will never
+ * happen.
+ *
+ * idle=mwait overrides this decision and forces the usage of mwait.
+ */
+static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+{
+ if (force_mwait)
+ return 1;
+
+ if (c->x86_vendor == X86_VENDOR_AMD) {
+ switch(c->x86) {
+ case 0x10:
+ case 0x11:
+ return 0;
+ }
+ }
+ return 1;
+}
+
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
static int selected;
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter > 5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter>5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
return prev_p;
}
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
+ preempt_disable();
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
- return;
+ goto out;
}
preempt_disable();
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+out:
+ preempt_enable();
}
/*
* Early setup to make printk work.
#include "mach_timer.h"
-static int tsc_enabled;
+static int tsc_disabled;
/*
* On some systems the TSC frequency does not
static int __init tsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC completely.\n");
- mark_tsc_unstable("user disabled TSC");
+ "cannot disable TSC completely.\n");
+ tsc_disabled = 1;
return 1;
}
#else
* very important for it to be as fast as the platform
* can achive it. )
*/
- if (unlikely(!tsc_enabled && !tsc_unstable))
+ if (unlikely(tsc_disabled))
/* No locking but a rare wrong value is not a big deal: */
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
{
if (!tsc_unstable) {
tsc_unstable = 1;
- tsc_enabled = 0;
printk("Marking TSC unstable due to: %s.\n", reason);
/* Can be called before registration */
if (clocksource_tsc.mult)
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
- d->ident);
+ d->ident);
tsc_unstable = 1;
return 0;
}
{
int cpu;
- if (!cpu_has_tsc)
+ if (!cpu_has_tsc || tsc_disabled) {
+ /* Disable the TSC in case of !cpu_has_tsc */
+ tsc_disabled = 1;
return;
+ }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
+ /*
+ * We need to disable the TSC completely in this case
+ * to prevent sched_clock() from using it.
+ */
+ tsc_disabled = 1;
return;
}
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- } else
- tsc_enabled = 1;
-
+ }
clocksource_register(&clocksource_tsc);
}
/* hpet or pmtimer available ? */
if (!hpet && !pm1 && !pm2) {
printk(KERN_INFO "TSC calibrated against PIT\n");
- return;
+ goto out;
}
/* Check, whether the sampling was disturbed by an SMI */
if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
printk(KERN_WARNING "TSC calibration disturbed by SMI, "
"using PIT calibration result\n");
- return;
+ goto out;
}
tsc2 = (tsc2 - tsc1) * 1000000L;
tsc_khz = tsc2 / tsc1;
+out:
for_each_possible_cpu(cpu)
set_cyc2ns_scale(tsc_khz, cpu);
}
{
struct kvm_pit *pit = vcpu->kvm->arch.vpit;
- if (pit && vcpu->vcpu_id == 0)
+ if (pit && vcpu->vcpu_id == 0 && pit->pit_state.inject_pending)
return atomic_read(&pit->pit_state.pit_timer.pending);
return 0;
{
struct kvm_lapic *lapic = vcpu->arch.apic;
- if (lapic)
+ if (lapic && apic_enabled(lapic) && apic_lvt_enabled(lapic, APIC_LVTT))
return atomic_read(&lapic->timer.pending);
return 0;
.seeks = DEFAULT_SEEKS * 10,
};
-void mmu_destroy_caches(void)
+static void mmu_destroy_caches(void)
{
if (pte_chain_cache)
kmem_cache_destroy(pte_chain_cache);
c->use_modrm_ea = 1;
if (c->modrm_mod == 3) {
- c->modrm_val = *(unsigned long *)
- decode_register(c->modrm_rm, c->regs, c->d & ByteOp);
+ c->modrm_ptr = decode_register(c->modrm_rm,
+ c->regs, c->d & ByteOp);
+ c->modrm_val = *(unsigned long *)c->modrm_ptr;
return rc;
}
if ((c->d & ModRM) && c->modrm_mod == 3) {
c->src.type = OP_REG;
c->src.val = c->modrm_val;
+ c->src.ptr = c->modrm_ptr;
break;
}
c->src.type = OP_MEM;
if ((c->d & ModRM) && c->modrm_mod == 3) {
c->dst.type = OP_REG;
c->dst.val = c->dst.orig_val = c->modrm_val;
+ c->dst.ptr = c->modrm_ptr;
break;
}
c->dst.type = OP_MEM;
int vector = FIRST_EXTERNAL_VECTOR + i;
if (vector != SYSCALL_VECTOR) {
set_intr_gate(vector, interrupt[i]);
- set_irq_chip_and_handler(i, &lguest_irq_controller,
- handle_level_irq);
+ set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+ handle_level_irq,
+ "level");
}
}
/* This call is required to set up for 4k stacks, where we have
static void delay_tsc(unsigned long loops)
{
unsigned long bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are per-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
- } while ((now-bclock) < loops);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
+ }
preempt_enable();
}
void __delay(unsigned long loops)
{
unsigned bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are pre-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
}
- while ((now-bclock) < loops);
preempt_enable();
}
EXPORT_SYMBOL(__delay);
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/user.h>
+#include <asm/i387.h>
#include "fpu_system.h"
#include "fpu_emu.h"
unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
struct desc_struct code_descriptor;
+ if (!used_math()) {
+ if (init_fpu(current)) {
+ do_group_exit(SIGKILL);
+ return;
+ }
+ }
+
#ifdef RE_ENTRANT_CHECKING
if (emulating) {
printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
RE_ENTRANT_CHECK_ON;
#endif /* RE_ENTRANT_CHECKING */
- if (!used_math()) {
- finit();
- set_used_math();
- }
-
SETUP_DATA_AREA(arg);
FPU_ORIG_EIP = FPU_EIP;
pmd_t *last_pmd = pmd + PTRS_PER_PMD;
for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
- if (!pmd_present(*pmd))
+ if (pmd_none(*pmd))
continue;
if (vaddr < (unsigned long) _text || vaddr > end)
set_pmd(pmd, __pmd(0));
static void __init early_memtest(unsigned long start, unsigned long end)
{
- unsigned long t_start, t_size;
+ u64 t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016lx - %016lx pattern %d",
+ printk(KERN_CONT "\n %016llx - %016llx pattern %d",
t_start, t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
unsigned long offset;
unsigned int nrpages;
enum fixed_addresses idx;
- unsigned int nesting;
+ int nesting;
nesting = --early_ioremap_nested;
- WARN_ON(nesting < 0);
+ if (WARN_ON(nesting < 0))
+ return;
if (early_ioremap_debug) {
printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
#ifdef CONFIG_X86_PAT
int __read_mostly pat_wc_enabled = 1;
-void __init pat_disable(char *reason)
+void __cpuinit pat_disable(char *reason)
{
pat_wc_enabled = 0;
printk(KERN_INFO "%s\n", reason);
}
-static int nopat(char *str)
+static int __init nopat(char *str)
{
pat_disable("PAT support disabled.");
return 0;
unsigned long pat_type;
u8 mtrr_type;
- mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFF) { /* MTRR not enabled */
- *ret_prot = prot;
- return 0;
- }
- if (mtrr_type == 0xFE) { /* MTRR match error */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
- if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
- mtrr_type != MTRR_TYPE_WRBACK &&
- mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
-
pat_type = prot & _PAGE_CACHE_MASK;
prot &= (~_PAGE_CACHE_MASK);
- /* Currently doing intersection by hand. Optimize it later. */
+ /*
+ * We return the PAT request directly for types where PAT takes
+ * precedence with respect to MTRR and for UC_MINUS.
+ * Consistency checks with other PAT requests is done later
+ * while going through memtype list.
+ */
if (pat_type == _PAGE_CACHE_WC) {
*ret_prot = prot | _PAGE_CACHE_WC;
+ return 0;
} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
- } else if (pat_type == _PAGE_CACHE_UC ||
- mtrr_type == MTRR_TYPE_UNCACHABLE) {
+ return 0;
+ } else if (pat_type == _PAGE_CACHE_UC) {
+ *ret_prot = prot | _PAGE_CACHE_UC;
+ return 0;
+ }
+
+ /*
+ * Look for MTRR hint to get the effective type in case where PAT
+ * request is for WB.
+ */
+ mtrr_type = mtrr_type_lookup(start, end);
+
+ if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
*ret_prot = prot | _PAGE_CACHE_UC;
} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
*ret_prot = prot | _PAGE_CACHE_WC;
if (req_type == -1) {
/*
- * Special case where caller wants to inherit from mtrr or
- * existing pat mapping, defaulting to UC_MINUS in case of
- * no match.
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
*/
u8 mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFE) { /* MTRR match error */
- err = -1;
- }
if (mtrr_type == MTRR_TYPE_WRBACK) {
req_type = _PAGE_CACHE_WB;
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
#ifdef __i386__
pci_mmcfg_early_init();
#ifdef CONFIG_PCI_OLPC
- pci_olpc_init();
+ if (!pci_olpc_init())
+ return 0; /* skip additional checks if it's an XO */
#endif
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
*/
device = PCI_DEVICE_ID_VIA_8235;
break;
+ case PCI_DEVICE_ID_VIA_8237:
+ /**
+ * Asus a7v600 bios wrongly reports 8237
+ * as 586-compatible
+ */
+ device = PCI_DEVICE_ID_VIA_8237;
+ break;
}
}
.write = pci_olpc_write,
};
-void __init pci_olpc_init(void)
+int __init pci_olpc_init(void)
{
if (!machine_is_olpc() || olpc_has_vsa())
- return;
+ return -ENODEV;
printk(KERN_INFO "PCI: Using configuration type OLPC\n");
raw_pci_ops = &pci_olpc_conf;
is_lx = is_geode_lx();
+ return 0;
}
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
-extern void pci_olpc_init(void);
+extern int pci_olpc_init(void);
/* pci-mmconfig.c */
do_realtime((struct timespec *)tv);
tv->tv_usec /= 1000;
if (unlikely(tz != NULL)) {
- /* This relies on gcc inlining the memcpy. We'll notice
- if it ever fails to do so. */
- memcpy(tz, >od->sys_tz, sizeof(struct timezone));
+ /* Avoid memcpy. Some old compilers fail to inline it */
+ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
+ tz->tz_dsttime = gtod->sys_tz.tz_dsttime;
}
return 0;
}
{
unsigned int level;
pte_t *pte = lookup_address(address, &level);
- unsigned offset = address & PAGE_MASK;
+ unsigned offset = address & ~PAGE_MASK;
BUG_ON(pte == NULL);
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
+ struct io_context *ioc;
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[rw], &wait,
TASK_UNINTERRUPTIBLE);
- rq = get_request(q, rw_flags, bio, GFP_NOIO);
-
- if (!rq) {
- struct io_context *ioc;
+ blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
- blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
-
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
- io_schedule();
+ __generic_unplug_device(q);
+ spin_unlock_irq(q->queue_lock);
+ io_schedule();
- /*
- * After sleeping, we become a "batching" process and
- * will be able to allocate at least one request, and
- * up to a big batch of them for a small period time.
- * See ioc_batching, ioc_set_batching
- */
- ioc = current_io_context(GFP_NOIO, q->node);
- ioc_set_batching(q, ioc);
+ /*
+ * After sleeping, we become a "batching" process and
+ * will be able to allocate at least one request, and
+ * up to a big batch of them for a small period time.
+ * See ioc_batching, ioc_set_batching
+ */
+ ioc = current_io_context(GFP_NOIO, q->node);
+ ioc_set_batching(q, ioc);
- spin_lock_irq(q->queue_lock);
- }
+ spin_lock_irq(q->queue_lock);
finish_wait(&rl->wait[rw], &wait);
- }
+
+ rq = get_request(q, rw_flags, bio, GFP_NOIO);
+ };
return rq;
}
local_irq_restore(flags);
}
+void __trace_note_message(struct blk_trace *bt, const char *fmt, ...)
+{
+ int n;
+ va_list args;
+ char *buf;
+
+ preempt_disable();
+ buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
+ va_start(args, fmt);
+ n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
+ va_end(args);
+
+ trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
+ preempt_enable();
+}
+EXPORT_SYMBOL_GPL(__trace_note_message);
+
static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
pid_t pid)
{
debugfs_remove(bt->dropped_file);
blk_remove_tree(bt->dir);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
kfree(bt);
}
if (!bt->sequence)
goto err;
+ bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG);
+ if (!bt->msg_data)
+ goto err;
+
ret = -ENOENT;
dir = blk_create_tree(buts->name);
if (!dir)
if (bt->dropped_file)
debugfs_remove(bt->dropped_file);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
if (bt->rchan)
relay_close(bt->rchan);
kfree(bt);
struct cfq_queue {
/* reference count */
atomic_t ref;
+ /* various state flags, see below */
+ unsigned int flags;
/* parent cfq_data */
struct cfq_data *cfqd;
/* service_tree member */
int queued[2];
/* currently allocated requests */
int allocated[2];
- /* pending metadata requests */
- int meta_pending;
/* fifo list of requests in sort_list */
struct list_head fifo;
unsigned long slice_end;
long slice_resid;
+ /* pending metadata requests */
+ int meta_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
unsigned short ioprio, org_ioprio;
unsigned short ioprio_class, org_ioprio_class;
- /* various state flags, see below */
- unsigned int flags;
};
enum cfqq_state_flags {
kmem_cache_free(cfq_pool, cfqq);
}
+/*
+ * Must always be called with the rcu_read_lock() held
+ */
static void
__call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
cfq_cic_free(cic);
}
+/*
+ * Must be called with rcu_read_lock() held or preemption otherwise disabled.
+ * Only two callers of this - ->dtor() which is called with the rcu_read_lock(),
+ * and ->trim() which is called with the task lock held
+ */
static void cfq_free_io_context(struct io_context *ioc)
{
/*
cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
{
struct cfq_io_context *cic;
+ unsigned long flags;
void *k;
if (unlikely(!ioc))
return NULL;
+ rcu_read_lock();
+
/*
* we maintain a last-hit cache, to avoid browsing over the tree
*/
cic = rcu_dereference(ioc->ioc_data);
- if (cic && cic->key == cfqd)
+ if (cic && cic->key == cfqd) {
+ rcu_read_unlock();
return cic;
+ }
do {
- rcu_read_lock();
cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
rcu_read_unlock();
if (!cic)
k = cic->key;
if (unlikely(!k)) {
cfq_drop_dead_cic(cfqd, ioc, cic);
+ rcu_read_lock();
continue;
}
+ spin_lock_irqsave(&ioc->lock, flags);
rcu_assign_pointer(ioc->ioc_data, cic);
+ spin_unlock_irqrestore(&ioc->lock, flags);
break;
} while (1);
static void cfq_slab_kill(void)
{
+ /*
+ * Caller already ensured that pending RCU callbacks are completed,
+ * so we should have no busy allocations at this point.
+ */
if (cfq_pool)
kmem_cache_destroy(cfq_pool);
if (cfq_ioc_pool)
ioc_gone = &all_gone;
/* ioc_gone's update must be visible before reading ioc_count */
smp_wmb();
+
+ /*
+ * this also protects us from entering cfq_slab_kill() with
+ * pending RCU callbacks
+ */
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
cfq_slab_kill();
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
spin_unlock_irq(q->queue_lock);
+ blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
+
return 1;
fail_register:
mutex_lock(&block_class_lock);
list_for_each_entry(dev, &block_class.devices, node) {
+ if (dev->type != &disk_type)
+ continue;
if (strcmp(dev->bus_id, name) == 0) {
struct gendisk *disk = dev_to_disk(dev);
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
memset(s, 0, sizeof(s));
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
lcldesc.tfm = ctx->child;
acpi_os_release_mutex(method_desc->method.
mutex->mutex.os_mutex);
- method_desc->method.mutex->mutex.thread_id = 0;
+ method_desc->method.mutex->mutex.thread_id = NULL;
}
}
/* Clear mutex info */
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
return_ACPI_STATUS(status);
}
/* Mark mutex unowned */
obj_desc->mutex.owner_thread = NULL;
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
/* Update Thread sync_level (Last mutex is the important one) */
{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
- /* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+ /* Mobile SATA Controller IDE (ICH8M) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
[ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+ &arg_list, NULL)))
+ printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev)
+ dev->flags |= ATA_DFLAG_DETACH;
+ else {
+ struct ata_link *tlink;
+ struct ata_device *tdev;
+
+ ata_port_for_each_link(tlink, ap)
+ ata_link_for_each_dev(tdev, tlink)
+ tdev->flags |= ATA_DFLAG_DETACH;
+ }
+
+ ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function. If
+ * the event is port-wide @dev is NULL. If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context. May sleep.
+ */
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
- u32 event)
+ u32 event, int is_dock_event)
{
char event_string[12];
char *envp[] = { event_string, NULL };
- struct ata_eh_info *ehi;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct kobject *kobj = NULL;
int wait = 0;
unsigned long flags;
+ acpi_handle handle, tmphandle;
+ unsigned long sta;
+ acpi_status status;
+
+ if (dev) {
+ if (dev->sdev)
+ kobj = &dev->sdev->sdev_gendev.kobj;
+ handle = dev->acpi_handle;
+ } else {
+ kobj = &ap->dev->kobj;
+ handle = ap->acpi_handle;
+ }
- if (!ap)
- ap = dev->link->ap;
- ehi = &ap->link.eh_info;
+ status = acpi_get_handle(handle, "_EJ0", &tmphandle);
+ if (ACPI_FAILURE(status))
+ /* This device does not support hotplug */
+ return;
spin_lock_irqsave(ap->lock, flags);
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
ata_ehi_push_desc(ehi, "ACPI event");
- ata_ehi_hotplugged(ehi);
- ata_port_freeze(ap);
- break;
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+ if (ACPI_FAILURE(status)) {
+ ata_port_printk(ap, KERN_ERR,
+ "acpi: failed to determine bay status (0x%x)\n",
+ status);
+ break;
+ }
+
+ if (sta) {
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else {
+ /* The device has gone - unplug it */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
+ }
+ break;
case ACPI_NOTIFY_EJECT_REQUEST:
ata_ehi_push_desc(ehi, "ACPI event");
- if (dev)
- dev->flags |= ATA_DFLAG_DETACH;
- else {
- struct ata_link *tlink;
- struct ata_device *tdev;
-
- ata_port_for_each_link(tlink, ap)
- ata_link_for_each_dev(tdev, tlink)
- tdev->flags |= ATA_DFLAG_DETACH;
- }
- ata_port_schedule_eh(ap);
+ if (!is_dock_event)
+ break;
+
+ /* undock event - immediate unplug */
+ ata_acpi_detach_device(ap, dev);
wait = 1;
break;
}
- if (dev) {
- if (dev->sdev)
- kobj = &dev->sdev->sdev_gendev.kobj;
- } else
- kobj = &ap->dev->kobj;
+ /* make sure kobj doesn't go away while ap->lock is released */
+ kobject_get(kobj);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (wait) {
+ ata_port_wait_eh(ap);
+ ata_acpi_eject_device(handle);
+ }
- if (kobj) {
+ if (kobj && !is_dock_event) {
sprintf(event_string, "BAY_EVENT=%d", event);
kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
}
- spin_unlock_irqrestore(ap->lock, flags);
+ kobject_put(kobj);
+}
- if (wait)
- ata_port_wait_eh(ap);
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_device *dev = data;
+
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+
+ ata_acpi_handle_hotplug(ap, NULL, event, 1);
}
static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_device *dev = data;
- ata_acpi_handle_hotplug(NULL, dev, event);
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
}
static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_port *ap = data;
- ata_acpi_handle_hotplug(ap, NULL, event);
+ ata_acpi_handle_hotplug(ap, NULL, event, 0);
}
/**
ata_acpi_ap_notify, ap);
/* we might be on a docking station */
register_hotplug_dock_device(ap->acpi_handle,
- ata_acpi_ap_notify, ap);
+ ata_acpi_ap_notify_dock, ap);
}
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
ata_acpi_dev_notify, dev);
/* we might be on a docking station */
register_hotplug_dock_device(dev->acpi_handle,
- ata_acpi_dev_notify, dev);
+ ata_acpi_dev_notify_dock, dev);
}
}
}
dev->horkage |= ata_dev_blacklisted(dev);
ata_force_horkage(dev);
+ if (dev->horkage & ATA_HORKAGE_DISABLE) {
+ ata_dev_printk(dev, KERN_INFO,
+ "unsupported device, disabling\n");
+ ata_dev_disable(dev);
+ return 0;
+ }
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
- /* Clear SError. PMP and some host PHYs require this to
- * operate and clearing should be done before checking PHY
- * online status to avoid race condition (hotplugging between
- * link resume and status check).
- */
+ /* clear SError, some PHYs require this even for SRST to work */
if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
rc = sata_scr_write(link, SCR_ERROR, serror);
- if (rc == 0 || rc == -EINVAL) {
- unsigned long flags;
- spin_lock_irqsave(link->ap->lock, flags);
- link->eh_info.serror = 0;
- spin_unlock_irqrestore(link->ap->lock, flags);
- rc = 0;
- }
- return rc;
+ return rc != -EINVAL ? rc : 0;
}
/**
if (check_ready)
rc = ata_wait_ready(link, deadline, check_ready);
out:
- if (rc && rc != -EAGAIN)
+ if (rc && rc != -EAGAIN) {
+ /* online is set iff link is online && reset succeeded */
+ if (online)
+ *online = false;
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
+ }
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
*/
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ u32 serror;
+
DPRINTK("ENTER\n");
+ /* reset complete, clear SError */
+ if (!sata_scr_read(link, SCR_ERROR, &serror))
+ sata_scr_write(link, SCR_ERROR, serror);
+
/* print link status */
sata_print_link_status(link);
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
- { "Config Disk", NULL, ATA_HORKAGE_NODMA |
- ATA_HORKAGE_SKIP_PM },
+ { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET;
+ ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
- ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
unsigned int err_mask = 0, action = 0;
u32 hotplug_mask;
- if (serror & SERR_PERSISTENT) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- }
- if (serror &
- (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
+ if (serror & (SERR_PERSISTENT | SERR_DATA)) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_RESET;
}
unsigned int *classes, unsigned long deadline)
{
struct ata_device *dev;
- int rc;
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_UNKNOWN;
- rc = reset(link, classes, deadline);
-
- /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
- ata_link_for_each_dev(dev, link)
- if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
-
- return rc;
+ return reset(link, classes, deadline);
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
ata_reset_fn_t reset;
unsigned long flags;
u32 sstatus;
- int rc;
+ int nr_known, rc;
- /* about to reset */
+ /*
+ * Prepare to reset
+ */
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
ap->ops->set_piomode(ap, dev);
}
- if (!softreset && !hardreset) {
- if (verbose)
- ata_link_printk(link, KERN_INFO, "no reset method "
- "available, skipping reset\n");
- if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
- lflags |= ATA_LFLAG_ASSUME_ATA;
- goto done;
- }
-
/* prefer hardreset */
+ reset = NULL;
ehc->i.action &= ~ATA_EH_RESET;
if (hardreset) {
reset = hardreset;
} else if (softreset) {
reset = softreset;
ehc->i.action = ATA_EH_SOFTRESET;
- } else {
- ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
- "please report to linux-ide@vger.kernel.org\n");
- dump_stack();
- return -EINVAL;
}
if (prereset) {
"prereset failed (errno=%d)\n", rc);
goto out;
}
- }
- /* prereset() might have cleared ATA_EH_RESET */
- if (!(ehc->i.action & ATA_EH_RESET)) {
- /* prereset told us not to reset, bang classes and return */
- ata_link_for_each_dev(dev, link)
- classes[dev->devno] = ATA_DEV_NONE;
- rc = 0;
- goto out;
+ /* prereset() might have cleared ATA_EH_RESET. If so,
+ * bang classes and return.
+ */
+ if (reset && !(ehc->i.action & ATA_EH_RESET)) {
+ ata_link_for_each_dev(dev, link)
+ classes[dev->devno] = ATA_DEV_NONE;
+ rc = 0;
+ goto out;
+ }
}
retry:
+ /*
+ * Perform reset
+ */
+ if (ata_is_host_link(link))
+ ata_eh_freeze_port(ap);
+
deadline = jiffies + ata_eh_reset_timeouts[try++];
- /* shut up during boot probing */
- if (verbose)
- ata_link_printk(link, KERN_INFO, "%s resetting link\n",
- reset == softreset ? "soft" : "hard");
+ if (reset) {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "%s resetting link\n",
+ reset == softreset ? "soft" : "hard");
- /* mark that this EH session started with reset */
- if (reset == hardreset)
- ehc->i.flags |= ATA_EHI_DID_HARDRESET;
- else
- ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
+ /* mark that this EH session started with reset */
+ if (reset == hardreset)
+ ehc->i.flags |= ATA_EHI_DID_HARDRESET;
+ else
+ ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
- rc = ata_do_reset(link, reset, classes, deadline);
+ rc = ata_do_reset(link, reset, classes, deadline);
- if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classify, classes)) {
- /* okay, let's do follow-up softreset */
- reset = softreset;
+ if (reset == hardreset &&
+ ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+ /* okay, let's do follow-up softreset */
+ reset = softreset;
- if (!reset) {
- ata_link_printk(link, KERN_ERR,
- "follow-up softreset required "
- "but no softreset avaliable\n");
- rc = -EINVAL;
- goto fail;
+ if (!reset) {
+ ata_link_printk(link, KERN_ERR,
+ "follow-up softreset required "
+ "but no softreset avaliable\n");
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
+ rc = ata_do_reset(link, reset, classes, deadline);
}
- ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
- rc = ata_do_reset(link, reset, classes, deadline);
+ /* -EAGAIN can happen if we skipped followup SRST */
+ if (rc && rc != -EAGAIN)
+ goto fail;
+ } else {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "no reset method "
+ "available, skipping reset\n");
+ if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
+ lflags |= ATA_LFLAG_ASSUME_ATA;
}
- /* -EAGAIN can happen if we skipped followup SRST */
- if (rc && rc != -EAGAIN)
- goto fail;
-
- done:
+ /*
+ * Post-reset processing
+ */
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Reset also wakes up
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
link->sata_spd = (sstatus >> 4) & 0xf;
+ /* thaw the port */
+ if (ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
+
+ /* postreset() should clear hardware SError. Although SError
+ * is cleared during link resume, clearing SError here is
+ * necessary as some PHYs raise hotplug events after SRST.
+ * This introduces race condition where hotplug occurs between
+ * reset and here. This race is mediated by cross checking
+ * link onlineness and classification result later.
+ */
if (postreset)
postreset(link, classes);
+ /* clear cached SError */
+ spin_lock_irqsave(link->ap->lock, flags);
+ link->eh_info.serror = 0;
+ spin_unlock_irqrestore(link->ap->lock, flags);
+
+ /* Make sure onlineness and classification result correspond.
+ * Hotplug could have happened during reset and some
+ * controllers fail to wait while a drive is spinning up after
+ * being hotplugged causing misdetection. By cross checking
+ * link onlineness and classification result, those conditions
+ * can be reliably detected and retried.
+ */
+ nr_known = 0;
+ ata_link_for_each_dev(dev, link) {
+ /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
+ else
+ nr_known++;
+ }
+
+ if (classify && !nr_known && ata_link_online(link)) {
+ if (try < max_tries) {
+ ata_link_printk(link, KERN_WARNING, "link online but "
+ "device misclassified, retrying\n");
+ rc = -EAGAIN;
+ goto fail;
+ }
+ ata_link_printk(link, KERN_WARNING,
+ "link online but device misclassified, "
+ "device detection might fail\n");
+ }
+
/* reset successful, schedule revalidation */
ata_eh_done(link, NULL, ATA_EH_RESET);
ehc->i.action |= ATA_EH_REVALIDATE;
struct ata_link *link;
struct ata_device *dev;
int nr_failed_devs, nr_disabled_devs;
- int reset, rc;
+ int rc;
unsigned long flags;
DPRINTK("ENTER\n");
rc = 0;
nr_failed_devs = 0;
nr_disabled_devs = 0;
- reset = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
if (ata_eh_skip_recovery(link))
ehc->i.action = 0;
- /* do we need to reset? */
- if (ehc->i.action & ATA_EH_RESET)
- reset = 1;
-
ata_link_for_each_dev(dev, link)
ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
}
/* reset */
- if (reset) {
- /* if PMP is attached, this function only deals with
- * downstream links, port should stay thawed.
- */
- if (!sata_pmp_attached(ap))
- ata_eh_freeze_port(ap);
-
- ata_port_for_each_link(link, ap) {
- struct ata_eh_context *ehc = &link->eh_context;
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
- if (!(ehc->i.action & ATA_EH_RESET))
- continue;
+ if (!(ehc->i.action & ATA_EH_RESET))
+ continue;
- rc = ata_eh_reset(link, ata_link_nr_vacant(link),
- prereset, softreset, hardreset,
- postreset);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "reset failed, giving up\n");
- goto out;
- }
+ rc = ata_eh_reset(link, ata_link_nr_vacant(link),
+ prereset, softreset, hardreset, postreset);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR,
+ "reset failed, giving up\n");
+ goto out;
}
-
- if (!sata_pmp_attached(ap))
- ata_eh_thaw_port(ap);
}
/* the rest */
tf.device = link->pmp;
err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
- SATA_PMP_SCR_TIMEOUT);
+ SATA_PMP_RW_TIMEOUT);
if (err_mask)
return err_mask;
tf.lbah = (val >> 24) & 0xff;
return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
- SATA_PMP_SCR_TIMEOUT);
+ SATA_PMP_RW_TIMEOUT);
}
/**
goto fail;
}
- /* turn off notification till fan-out ports are reset and configured */
- if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
- gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
-
- err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_FEAT_EN,
- gscr[SATA_PMP_GSCR_FEAT_EN]);
- if (err_mask) {
- rc = -EIO;
- reason = "failed to write GSCR_FEAT_EN";
- goto fail;
- }
- }
-
if (print_info) {
ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
"0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* class code report is unreliable */
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
if (ehc->i.action & ATA_EH_RESET) {
struct ata_link *tlink;
- ata_eh_freeze_port(ap);
-
/* reset */
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
goto fail;
}
- ata_eh_thaw_port(ap);
-
/* PMP is reset, SErrors cannot be trusted, scan all */
ata_port_for_each_link(tlink, ap) {
struct ata_eh_context *ehc = &tlink->eh_context;
struct ata_link *pmp_link = &ap->link;
struct ata_device *pmp_dev = pmp_link->device;
struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
+ u32 *gscr = pmp_dev->gscr;
struct ata_link *link;
struct ata_device *dev;
unsigned int err_mask;
if (rc)
goto pmp_fail;
+ /* PHY event notification can disturb reset and other recovery
+ * operations. Turn it off.
+ */
+ if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
+ gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
+
+ err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+ gscr[SATA_PMP_GSCR_FEAT_EN]);
+ if (err_mask) {
+ ata_link_printk(pmp_link, KERN_WARNING,
+ "failed to disable NOTIFY (err_mask=0x%x)\n",
+ err_mask);
+ goto pmp_fail;
+ }
+ }
+
/* handle disabled links */
rc = sata_pmp_eh_handle_disabled_links(ap);
if (rc)
/* enable notification */
if (pmp_dev->flags & ATA_DFLAG_AN) {
- pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
+ gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
- err_mask = sata_pmp_write(pmp_dev->link, SATA_PMP_GSCR_FEAT_EN,
- pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN]);
+ err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+ gscr[SATA_PMP_GSCR_FEAT_EN]);
if (err_mask) {
ata_dev_printk(pmp_dev, KERN_ERR, "failed to write "
"PMP_FEAT_EN (Emask=0x%x)\n", err_mask);
if (((cdb[4] >> 4) & 0xf) != 0)
goto invalid_fld; /* power conditions not supported */
- if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) {
- /* the device lacks PM support, finish without doing anything */
- scmd->result = SAM_STAT_GOOD;
- return 1;
- }
-
if (cdb[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
/**
* ata_scsi_rbuf_get - Map response buffer.
+ * @cmd: SCSI command containing buffer to be mapped.
* @flags: unsigned long variable to store irq enable status
* @copy_in: copy in from user buffer
*
/**
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- * @bufp: output buffer
+ * @buf: output buffer
*
* Generate a generic MODE SENSE r/w error recovery page.
*
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->sff_check_altstatus)
return ap->ops->sff_check_altstatus(ap);
return ioread8(ap->ioaddr.altstatus_addr);
}
+/**
+ * ata_sff_irq_status - Check if the device is busy
+ * @ap: port where the device is
+ *
+ * Determine if the port is currently busy. Uses altstatus
+ * if available in order to avoid clearing shared IRQ status
+ * when finding an IRQ source. Non ctl capable devices don't
+ * share interrupt lines fortunately for us.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+ u8 status;
+
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ status = ata_sff_altstatus(ap);
+ /* Not us: We are busy */
+ if (status & ATA_BUSY)
+ return status;
+ }
+ /* Clear INTRQ latch */
+ status = ap->ops->sff_check_status(ap);
+ return status;
+}
+
+/**
+ * ata_sff_sync - Flush writes
+ * @ap: Port to wait for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ ap->ops->sff_check_altstatus(ap);
+ else if (ap->ioaddr.altstatus_addr)
+ ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_pause - Flush writes and wait 400nS
+ * @ap: Port to pause for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_sync(ap);
+ ndelay(400);
+}
+
+/**
+ * ata_sff_dma_pause - Pause before commencing DMA
+ * @ap: Port to pause for.
+ *
+ * Perform I/O fencing and ensure sufficient cycle delays occur
+ * for the HDMA1:0 transition
+ */
+
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ /* An altstatus read will cause the needed delay without
+ messing up the IRQ status */
+ ata_sff_altstatus(ap);
+ return;
+ }
+ /* There are no DMA controllers without ctl. BUG here to ensure
+ we never violate the HDMA1:0 transition timing and risk
+ corruption. */
+ BUG();
+}
+
/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
} else
ata_pio_sector(qc);
- ata_sff_altstatus(qc->ap); /* flush */
+ ata_sff_sync(qc->ap); /* flush */
}
/**
WARN_ON(qc->dev->cdb_len < 12);
ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_sff_altstatus(ap); /* flush */
-
+ ata_sff_sync(ap);
+ /* FIXME: If the CDB is for DMA do we need to do the transition delay
+ or is bmdma_start guaranteed to do it ? */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_sff_altstatus(ap); /* flush */
+ ata_sff_sync(ap); /* flush */
return;
goto idle_irq;
}
- /* check altstatus */
- status = ata_sff_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
+ /* check main status, clearing INTRQ if needed */
+ status = ata_sff_irq_status(ap);
+ if (status & ATA_BUSY)
goto idle_irq;
/* ack bmdma irq events */
ap->ops->bmdma_stop(qc);
}
- ata_sff_altstatus(ap);
+ ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap);
}
/**
EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
EXPORT_SYMBOL_GPL(ata_sff_dev_select);
EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
EXPORT_SYMBOL_GPL(ata_sff_tf_load);
u8 udma;
if (t != NULL) {
- t->setup = FIT(t->setup, 1, 8) & 7;
- t->act8b = FIT(t->act8b, 1, 8) & 7;
- t->rec8b = FIT(t->rec8b, 1, 16) & 15;
- t->active = FIT(t->active, 1, 8) & 7;
- t->recover = FIT(t->recover, 1, 16) & 15;
+ t->setup = clamp_val(t->setup, 1, 8) & 7;
+ t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+ t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+ t->active = clamp_val(t->active, 1, 8) & 7;
+ t->recover = clamp_val(t->recover, 1, 16) & 15;
pci_write_config_byte(pdev, cas, t->setup);
pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
/* Configure the address set up timing */
pci_read_config_byte(pdev, offset + 0x0C, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(pdev, offset + 0x0C , t);
/* Configure the 8bit I/O timing */
pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
- ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+ ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
/* Drive timing */
pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
- ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+ ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
switch (clock) {
case 1:
- t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+ t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
break;
case 2:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
break;
case 3:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
break;
case 4:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
break;
default:
if (!info)
return -ENOMEM;
- memset(info, 0, sizeof(struct at32_ide_info));
-
info->irq = irq;
info->cs = board->cs;
/* Reset all transfer count */
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
- /* Set transfer length to buffer len */
+ /* Set ATAPI state machine contorl in terminate sequence */
+ ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
+
+ /* Set transfer length to buffer len */
for_each_sg(qc->sg, sg, qc->n_elem, si) {
ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
}
return;
}
- time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
- time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+ time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
+ time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
if (adev->devno == 0) {
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0x0F; /* Mask bits */
- addr |= FIT(t.setup, 0, 15);
+ addr |= clamp_val(t.setup, 0, 15);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0xF0; /* Mask bits */
- addr |= (FIT(t.setup, 0, 15) << 4);
+ addr |= (clamp_val(t.setup, 0, 15) << 4);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_sff_altstatus(ap);
+ ata_sff_dma_pause(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 4, 15);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 4, 15);
inb(0x3E6);
inb(0x3E6);
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 2, 16);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 2, 16);
recover &= 0x15;
inb(0x3E6);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(ld_winbond->timing, timing, reg);
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}
return;
}
- at.active = FIT(at.active, 2, 16) - 2;
- at.setup = FIT(at.setup, 1, 4) - 1;
- at.recover = FIT(at.recover, 1, 12) - 1;
+ at.active = clamp_val(at.active, 2, 16) - 2;
+ at.setup = clamp_val(at.setup, 1, 4) - 1;
+ at.recover = clamp_val(at.recover, 1, 12) - 1;
idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
- clocking = 17 - FIT(t.active, 2, 17);
- clocking |= (16 - FIT(t.recover, 1, 16)) << 4;
+ clocking = 17 - clamp_val(t.active, 2, 17);
+ clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
/* Use the same timing for read and write bytes */
clocking |= (clocking << 8);
pci_write_config_word(dev, timing, clocking);
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
struct ata_host *ah = ap->host;
struct rb532_cf_info *info = ah->private_data;
- ata_sff_altstatus(ap);
+ /* FIXME: Keep previous delay. If this is merely a fence then
+ ata_sff_sync might be sufficient. */
+ ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap); /* dummy read */
}
/**
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((scc_check_altstatus(ap) & ATA_ERR)
+ && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
int rc;
- /* First apply the usual rules */
+ /* First apply the usual rules */
rc = ata_std_qc_defer(qc);
if (rc != 0)
return rc;
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
- setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
pci_write_config_byte(pdev, 0x4C, setup);
}
/* Load the PIO mode bits */
pci_write_config_byte(pdev, 0x4F - ap->port_no,
- ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+ ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
- ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+ ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
switch(udma_type) {
/* BUG() ? */
/* fall through */
case 33:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
break;
case 66:
- ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
break;
case 100:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
case 133:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
}
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(winbond->config, timing, reg);
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(winbond->config, timing + 1, reg);
}
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
ioread32(CA + hcr_base),
ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+ iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
+
/* Simply queue command to the controller/device */
iowrite32(1 << tag, CQ + hcr_base);
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
+static void sata_fsl_pmp_attach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
+}
+
+static void sata_fsl_pmp_detach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_PMP_ATTACHED;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* enable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+}
+
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sata_fsl_port_priv *pp;
- int retval;
void *mem;
dma_addr_t mem_dma;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
}
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
+ int pmp = sata_srst_pmp(link);
u32 temp;
struct ata_taskfile tf;
u8 *cfis;
DPRINTK("in xx_softreset\n");
+ if (pmp != SATA_PMP_CTRL_PORT)
+ goto issue_srst;
+
try_offline_again:
/*
* Force host controller to go off-line, aborting current operations
temp = ioread32(hcr_base + HCONTROL);
temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+ temp |= HCONTROL_PMP_ATTACHED;
iowrite32(temp, hcr_base + HCONTROL);
temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
}
/*
if ((temp & 0xFF) != 0x18) {
ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
} else {
ata_port_printk(ap, KERN_INFO,
"Signature Update detected @ %d msecs\n",
* reached here, we can send a command to the target device
*/
+issue_srst:
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
cfis[0], cfis[1], cfis[2], cfis[3]);
sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
+ if (pmp != SATA_PMP_CTRL_PORT)
+ iowrite32(pmp, CQPMP + hcr_base);
iowrite32(1, CQ + hcr_base);
msleep(150); /* ?? */
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
}
+out:
return 0;
err:
return -EIO;
}
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+ DPRINTK("in xx_error_handler\n");
+ sata_pmp_error_handler(ap);
+
+}
+
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
- u32 hstatus, dereg, cereg = 0, SError = 0;
+ u32 hstatus, dereg=0, cereg = 0, SError = 0;
unsigned int err_mask = 0, action = 0;
- struct ata_queued_cmd *qc;
- int freeze = 0;
+ int freeze = 0, abort=0;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *qc = NULL;
+ struct ata_eh_info *ehi;
hstatus = ioread32(hcr_base + HSTATUS);
cereg = ioread32(hcr_base + CE);
+ /* first, analyze and record host port events */
+ link = &ap->link;
+ ehi = &link->eh_info;
ata_ehi_clear_desc(ehi);
/*
sata_fsl_scr_read(ap, SCR_ERROR, &SError);
if (unlikely(SError & 0xFFFF0000)) {
sata_fsl_scr_write(ap, SCR_ERROR, SError);
- err_mask |= AC_ERR_ATA_BUS;
}
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
- /* handle single device errors */
- if (cereg) {
- /*
- * clear the command error, also clears queue to the device
- * in error, and we can (re)issue commands to this device.
- * When a device is in error all commands queued into the
- * host controller and at the device are considered aborted
- * and the queue for that device is stopped. Now, after
- * clearing the device error, we can issue commands to the
- * device to interrogate it to find the source of the error.
- */
- dereg = ioread32(hcr_base + DE);
- iowrite32(dereg, hcr_base + DE);
- iowrite32(cereg, hcr_base + CE);
+ /* handle fatal errors */
+ if (hstatus & FATAL_ERROR_DECODE) {
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+ ehi->action |= ATA_EH_SOFTRESET;
- DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
- ioread32(hcr_base + CE), ioread32(hcr_base + DE));
/*
- * We should consider this as non fatal error, and TF must
- * be updated as done below.
+ * Ignore serror in case of fatal errors as we always want
+ * to do a soft-reset of the FSL SATA controller. Analyzing
+ * serror may cause libata to schedule a hard-reset action,
+ * and hard-reset currently does not do controller
+ * offline/online, causing command timeouts and leads to an
+ * un-recoverable state, hence make libATA ignore
+ * autopsy in case of fatal errors.
*/
- err_mask |= AC_ERR_DEV;
- }
+ ehi->flags |= ATA_EHI_NO_AUTOPSY;
- /* handle fatal errors */
- if (hstatus & FATAL_ERROR_DECODE) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- /* how will fatal error interrupts be completed ?? */
freeze = 1;
}
/* Setup a soft-reset EH action */
ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
freeze = 1;
}
- /* record error info */
- qc = ata_qc_from_tag(ap, link->active_tag);
+ /* handle single device errors */
+ if (cereg) {
+ /*
+ * clear the command error, also clears queue to the device
+ * in error, and we can (re)issue commands to this device.
+ * When a device is in error all commands queued into the
+ * host controller and at the device are considered aborted
+ * and the queue for that device is stopped. Now, after
+ * clearing the device error, we can issue commands to the
+ * device to interrogate it to find the source of the error.
+ */
+ abort = 1;
+
+ DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
+ ioread32(hcr_base + CE), ioread32(hcr_base + DE));
- if (qc)
+ /* find out the offending link and qc */
+ if (ap->nr_pmp_links) {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ if (dereg < ap->nr_pmp_links) {
+ link = &ap->pmp_link[dereg];
+ ehi = &link->eh_info;
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
+
+ err_mask |= AC_ERR_DEV;
+
+ } else {
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_HARDRESET;
+ freeze = 1;
+ }
+ } else {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
+ err_mask |= AC_ERR_DEV;
+ }
+ }
+
+ /* record error info */
+ if (qc) {
qc->err_mask |= err_mask;
- else
+ } else
ehi->err_mask |= err_mask;
ehi->action |= action;
- ehi->serror |= SError;
/* freeze or abort */
if (freeze)
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ else if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void sata_fsl_host_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
return;
}
- if (link->sactive) { /* only true for NCQ commands */
+ /* Read command completed register */
+ qc_active = ioread32(hcr_base + CC);
+
+ VPRINTK("Status of all queues :\n");
+ VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+ qc_active,
+ ioread32(hcr_base + CA),
+ ioread32(hcr_base + CE),
+ ioread32(hcr_base + CQ),
+ ap->qc_active);
+
+ if (qc_active & ap->qc_active) {
int i;
- /* Read command completed register */
- qc_active = ioread32(hcr_base + CC);
/* clear CC bit, this will also complete the interrupt */
iowrite32(qc_active, hcr_base + CC);
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
}
return;
- } else if (ap->qc_active) {
+ } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, link->active_tag);
+ qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
- DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- link->active_tag, ioread32(hcr_base + CC));
+ DPRINTK("completing non-ncq cmd, CC=0x%x\n",
+ ioread32(hcr_base + CC));
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
ioread32(hcr_base + CC));
+ iowrite32(qc_active, hcr_base + CC);
return;
}
}
iowrite32(0x00000FFFF, hcr_base + CE);
iowrite32(0x00000FFFF, hcr_base + DE);
- /* initially assuming no Port multiplier, set CQPMP to 0 */
- iowrite32(0x0, hcr_base + CQPMP);
-
/*
* host controller will be brought on-line, during xx_port_start()
* callback, that should also initiate the OOB, COMINIT sequence
.dma_boundary = ATA_DMA_BOUNDARY,
};
-static const struct ata_port_operations sata_fsl_ops = {
- .inherits = &sata_port_ops,
+static struct ata_port_operations sata_fsl_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
.thaw = sata_fsl_thaw,
.prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
+ .pmp_softreset = sata_fsl_softreset,
+ .error_handler = sata_fsl_error_handler,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
.port_stop = sata_fsl_port_stop,
+
+ .pmp_attach = sata_fsl_pmp_attach,
+ .pmp_detach = sata_fsl_pmp_detach,
};
static const struct ata_port_info sata_fsl_port_info[] = {
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.20"
+#define DRV_VERSION "1.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- /* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
ATA_FLAG_PIO_POLLING,
+
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
+ MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | ATA_FLAG_AN,
+
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
- HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
- PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
- PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
- HC_MAIN_RSVD),
- HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
- HC_MAIN_RSVD_5),
- HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC),
/* SATAHC registers */
HC_CFG_OFS = 0,
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+ SATA_FIS_IRQ_AN = (1 << 9), /* async notification */
LTMODE_OFS = 0x30c,
LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
PHY_MODE2 = 0x330,
SATA_IFCTL_OFS = 0x344,
SATA_TESTCTL_OFS = 0x348,
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_ERRATA_XX42A0 = (1 << 5),
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
-#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
struct mv_host_priv {
u32 hp_flags;
+ u32 main_irq_mask;
struct mv_port_signal signal[8];
const struct mv_hw_ops *ops;
int n_ports;
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_soc */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ | MV_FLAG_SOC,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crqb_dma & 0xffffffff) | index,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
/*
* initialize response queue
WARN_ON(pp->crpb_dma & 0xff);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crpb_dma & 0xffffffff) | index,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
+static void mv_set_main_irq_mask(struct ata_host *host,
+ u32 disable_bits, u32 enable_bits)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 old_mask, new_mask;
+
+ old_mask = hpriv->main_irq_mask;
+ new_mask = (old_mask & ~disable_bits) | enable_bits;
+ if (new_mask != old_mask) {
+ hpriv->main_irq_mask = new_mask;
+ writelfl(new_mask, hpriv->main_irq_mask_addr);
+ }
+}
+
+static void mv_enable_port_irqs(struct ata_port *ap,
+ unsigned int port_bits)
+{
+ unsigned int shift, hardport, port = ap->port_no;
+ u32 disable_bits, enable_bits;
+
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+
+ disable_bits = (DONE_IRQ | ERR_IRQ) << shift;
+ enable_bits = port_bits << shift;
+ mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
+}
+
/**
* mv_start_dma - Enable eDMA engine
* @base: port base address
mv_edma_cfg(ap, want_ncq);
/* clear FIS IRQ Cause */
- writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ if (IS_GEN_IIE(hpriv))
+ writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
mv_set_edma_ptrs(port_mmio, hpriv, pp);
+ mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ);
writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- if (HAS_PCI(ap->host))
+ if (!IS_SOC(hpriv))
cfg |= (1 << 18); /* enab early completion */
if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
static void mv_port_stop(struct ata_port *ap)
{
mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
mv_port_free_dma_mem(ap);
}
* shadow block, etc registers.
*/
mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, ERR_IRQ);
mv_pmp_select(ap, qc->dev->link->pmp);
return ata_sff_qc_issue(qc);
}
}
}
+static int mv_req_q_empty(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 in_ptr, out_ptr;
+
+ in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ return (in_ptr == out_ptr); /* 1 == queue_is_empty */
+}
+
static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
{
struct mv_port_priv *pp = ap->private_data;
ap->qc_active, failed_links,
ap->nr_active_links);
- if (ap->nr_active_links <= failed_links) {
+ if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
mv_process_crpb_entries(ap, pp);
mv_stop_edma(ap);
mv_eh_freeze(ap);
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ u32 fis_cause = 0;
struct mv_port_priv *pp = ap->private_data;
struct mv_host_priv *hpriv = ap->host->private_data;
unsigned int action = 0, err_mask = 0;
/*
* Read and clear the SError and err_cause bits.
+ * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
+ * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
*/
sata_scr_read(&ap->link, SCR_ERROR, &serr);
sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ }
writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n",
- __func__, edma_err_cause, pp->pp_flags);
-
if (edma_err_cause & EDMA_ERR_DEV) {
/*
* Device errors during FIS-based switching operation
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
edma_err_cause, pp->pp_flags);
+
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
+ if (fis_cause & SATA_FIS_IRQ_AN) {
+ u32 ec = edma_err_cause &
+ ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
+ sata_async_notification(ap);
+ if (!ec)
+ return; /* Just an AN; no need for the nukes */
+ ata_ehi_push_desc(ehi, "SDB notify");
+ }
+ }
/*
* All generations share these EDMA error cause bits:
*/
struct ata_host *host = dev_instance;
struct mv_host_priv *hpriv = host->private_data;
unsigned int handled = 0;
- u32 main_irq_cause, main_irq_mask;
+ u32 main_irq_cause, pending_irqs;
spin_lock(&host->lock);
main_irq_cause = readl(hpriv->main_irq_cause_addr);
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
+ pending_irqs = main_irq_cause & hpriv->main_irq_mask;
/*
* Deal with cases where we either have nothing pending, or have read
* a bogus register value which can indicate HW removal or PCI fault.
*/
- if ((main_irq_cause & main_irq_mask) && (main_irq_cause != 0xffffffffU)) {
- if (unlikely((main_irq_cause & PCI_ERR) && HAS_PCI(host)))
+ if (pending_irqs && main_irq_cause != 0xffffffffU) {
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
handled = mv_pci_error(host, hpriv->base);
else
- handled = mv_host_intr(host, main_irq_cause);
+ handled = mv_host_intr(host, pending_irqs);
}
spin_unlock(&host->lock);
return IRQ_RETVAL(handled);
ZERO(MV_PCI_DISC_TIMER);
ZERO(MV_PCI_MSI_TRIGGER);
writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
- ZERO(PCI_HC_MAIN_IRQ_MASK_OFS);
ZERO(MV_PCI_SERR_MASK);
ZERO(hpriv->irq_cause_ofs);
ZERO(hpriv->irq_mask_ofs);
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
- u32 m2, tmp;
+ u32 m2, m3;
if (fix_phy_mode2) {
m2 = readl(port_mmio + PHY_MODE2);
udelay(200);
}
- /* who knows what this magic does */
- tmp = readl(port_mmio + PHY_MODE3);
- tmp &= ~0x7F800000;
- tmp |= 0x2A800000;
- writel(tmp, port_mmio + PHY_MODE3);
-
- if (fix_phy_mode4) {
- u32 m4;
-
- m4 = readl(port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + PHY_MODE3);
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
- /* workaround for errata FEr SATA#10 (part 1) */
- m4 = (m4 & ~(1 << 1)) | (1 << 0);
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
+ if (fix_phy_mode4) {
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
writel(m4, port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + PHY_MODE3);
}
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
/* Revert values of pre-emphasis and signal amps to the saved ones */
m2 = readl(port_mmio + PHY_MODE2);
rc = sata_link_hardreset(link, timing, deadline + extra,
&online, NULL);
+ rc = online ? -EAGAIN : rc;
if (rc)
return rc;
sata_scr_read(link, SCR_STATUS, &sstatus);
static void mv_eh_freeze(struct ata_port *ap)
{
- struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int shift, hardport, port = ap->port_no;
- u32 main_irq_mask;
-
- /* FIXME: handle coalescing completion events properly */
-
mv_stop_edma(ap);
- MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
-
- /* disable assertion of portN err, done events */
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
- main_irq_mask &= ~((DONE_IRQ | ERR_IRQ) << shift);
- writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
+ mv_enable_port_irqs(ap, 0);
}
static void mv_eh_thaw(struct ata_port *ap)
{
struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int shift, hardport, port = ap->port_no;
+ unsigned int port = ap->port_no;
+ unsigned int hardport = mv_hardport_from_port(port);
void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
void __iomem *port_mmio = mv_ap_base(ap);
- u32 main_irq_mask, hc_irq_cause;
-
- /* FIXME: handle coalescing completion events properly */
-
- MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+ u32 hc_irq_cause;
/* clear EDMA errors on this port */
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
- /* enable assertion of portN err, done events */
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
- main_irq_mask |= ((DONE_IRQ | ERR_IRQ) << shift);
- writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
+ mv_enable_port_irqs(ap, ERR_IRQ);
}
/**
void __iomem *mmio = hpriv->base;
u32 reg;
- if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
return 0; /* not PCI-X capable */
reg = readl(mmio + MV_PCI_MODE_OFS);
if ((reg & MV_PCI_MODE_MASK) == 0)
hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
- case 0x0:
- hp_flags |= MV_HP_ERRATA_XX42A0;
- break;
- case 0x1:
+ case 0x2: /* Rev.B0: the first/only public release */
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
break;
default:
if (rc)
goto done;
- if (HAS_PCI(host)) {
- hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
- hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
- } else {
+ if (IS_SOC(hpriv)) {
hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
/* global interrupt mask: 0 == mask everything */
- writel(0, hpriv->main_irq_mask_addr);
+ mv_set_main_irq_mask(host, ~0, 0);
n_hc = mv_get_hc_count(host->ports[0]->flags);
mv_port_init(&ap->ioaddr, port_mmio);
#ifdef CONFIG_PCI
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
unsigned int offset = port_mmio - mmio;
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
/* Clear any currently outstanding host interrupt conditions */
writelfl(0, mmio + hpriv->irq_cause_ofs);
/* and unmask interrupt generation for host regs */
writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
- if (IS_GEN_I(hpriv))
- writelfl(~HC_MAIN_MASKED_IRQS_5,
- hpriv->main_irq_mask_addr);
- else
- writelfl(~HC_MAIN_MASKED_IRQS,
- hpriv->main_irq_mask_addr);
-
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
- "PCI int cause/mask=0x%08x/0x%08x\n",
- readl(hpriv->main_irq_cause_addr),
- readl(hpriv->main_irq_mask_addr),
- readl(mmio + hpriv->irq_cause_ofs),
- readl(mmio + hpriv->irq_mask_ofs));
- } else {
- writelfl(~HC_MAIN_MASKED_IRQS_SOC,
- hpriv->main_irq_mask_addr);
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n",
- readl(hpriv->main_irq_cause_addr),
- readl(hpriv->main_irq_mask_addr));
+
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
}
done:
return rc;
PDC_MMIO_BAR = 3,
PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */
- /* register offsets */
+ /* host register offsets (from host->iomap[PDC_MMIO_BAR]) */
+ PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
+ PDC_FLASH_CTL = 0x44, /* Flash control register */
+ PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
+ PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
+ PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
+ PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
+
+ /* per-port ATA register offsets (from ap->ioaddr.cmd_addr) */
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
PDC_ALTSTATUS = 0x38, /* Alternate-status/device-control reg (per port) */
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
- PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
- PDC_FLASH_CTL = 0x44, /* Flash control register */
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
- PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
- PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
- PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
- PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
+
+ /* per-port SATA register offsets (from ap->ioaddr.scr_addr) */
+ PDC_PHYMODE4 = 0x14,
/* PDC_GLOBAL_CTL bit definitions */
PDC_PH_ERR = (1 << 8), /* PCI error while loading packet */
static int pdc_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int pdc_sata_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int pdc_common_port_start(struct ata_port *ap);
static int pdc_sata_port_start(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
/* fix up PHYMODE4 align timing */
if (ap->flags & PDC_FLAG_GEN_II) {
- void __iomem *mmio = ap->ioaddr.scr_addr;
+ void __iomem *sata_mmio = ap->ioaddr.scr_addr;
unsigned int tmp;
- tmp = readl(mmio + 0x014);
+ tmp = readl(sata_mmio + PDC_PHYMODE4);
tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */
- writel(tmp, mmio + 0x014);
+ writel(tmp, sata_mmio + PDC_PHYMODE4);
}
return 0;
static void pdc_reset_port(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+ void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
unsigned int i;
u32 tmp;
for (i = 11; i > 0; i--) {
- tmp = readl(mmio);
+ tmp = readl(ata_ctlstat_mmio);
if (tmp & PDC_RESET)
break;
udelay(100);
tmp |= PDC_RESET;
- writel(tmp, mmio);
+ writel(tmp, ata_ctlstat_mmio);
}
tmp &= ~PDC_RESET;
- writel(tmp, mmio);
- readl(mmio); /* flush */
+ writel(tmp, ata_ctlstat_mmio);
+ readl(ata_ctlstat_mmio); /* flush */
}
static int pdc_pata_cable_detect(struct ata_port *ap)
{
u8 tmp;
- void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
- tmp = readb(mmio);
+ tmp = readb(ata_mmio + PDC_CTLSTAT + 3);
if (tmp & 0x01)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
pdc_fill_sg(qc);
- /* fall through */
-
+ /*FALLTHROUGH*/
case ATA_PROT_NODATA:
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
qc->dev->devno, pp->pkt);
-
if (qc->tf.flags & ATA_TFLAG_LBA48)
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
else
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
-
pdc_pkt_footer(&qc->tf, pp->pkt, i);
break;
-
case ATAPI_PROT_PIO:
pdc_fill_sg(qc);
break;
-
case ATAPI_PROT_DMA:
pdc_fill_sg(qc);
/*FALLTHROUGH*/
case ATAPI_PROT_NODATA:
pdc_atapi_pkt(qc);
break;
-
default:
break;
}
unsigned int nr_ports = pdc_sata_nr_ports(ap);
unsigned int i;
- for(i = 0; i < nr_ports && host->ports[i] != ap; ++i)
+ for (i = 0; i < nr_ports && host->ports[i] != ap; ++i)
;
BUG_ON(i >= nr_ports);
return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
static void pdc_freeze(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 tmp;
- tmp = readl(mmio + PDC_CTLSTAT);
+ tmp = readl(ata_mmio + PDC_CTLSTAT);
tmp |= PDC_IRQ_DISABLE;
tmp &= ~PDC_DMA_ENABLE;
- writel(tmp, mmio + PDC_CTLSTAT);
- readl(mmio + PDC_CTLSTAT); /* flush */
+ writel(tmp, ata_mmio + PDC_CTLSTAT);
+ readl(ata_mmio + PDC_CTLSTAT); /* flush */
}
static void pdc_sata_freeze(struct ata_port *ap)
static void pdc_thaw(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 tmp;
/* clear IRQ */
- readl(mmio + PDC_INT_SEQMASK);
+ readl(ata_mmio + PDC_COMMAND);
/* turn IRQ back on */
- tmp = readl(mmio + PDC_CTLSTAT);
+ tmp = readl(ata_mmio + PDC_CTLSTAT);
tmp &= ~PDC_IRQ_DISABLE;
- writel(tmp, mmio + PDC_CTLSTAT);
- readl(mmio + PDC_CTLSTAT); /* flush */
+ writel(tmp, ata_mmio + PDC_CTLSTAT);
+ readl(ata_mmio + PDC_CTLSTAT); /* flush */
}
static void pdc_sata_thaw(struct ata_port *ap)
ata_port_abort(ap);
}
-static inline unsigned int pdc_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+static unsigned int pdc_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
{
unsigned int handled = 0;
- void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 port_status, err_mask;
err_mask = PDC_ERR_MASK;
err_mask &= ~PDC1_ERR_MASK;
else
err_mask &= ~PDC2_ERR_MASK;
- port_status = readl(port_mmio + PDC_GLOBAL_CTL);
+ port_status = readl(ata_mmio + PDC_GLOBAL_CTL);
if (unlikely(port_status & err_mask)) {
pdc_error_intr(ap, qc, port_status, err_mask);
return 1;
ata_qc_complete(qc);
handled = 1;
break;
-
default:
ap->stats.idle_irq++;
break;
static void pdc_irq_clear(struct ata_port *ap)
{
- struct ata_host *host = ap->host;
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
- readl(mmio + PDC_INT_SEQMASK);
+ readl(ata_mmio + PDC_COMMAND);
}
static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
u32 mask = 0;
unsigned int i, tmp;
unsigned int handled = 0;
- void __iomem *mmio_base;
+ void __iomem *host_mmio;
unsigned int hotplug_offset, ata_no;
u32 hotplug_status;
int is_sataii_tx4;
return IRQ_NONE;
}
- mmio_base = host->iomap[PDC_MMIO_BAR];
+ host_mmio = host->iomap[PDC_MMIO_BAR];
spin_lock(&host->lock);
hotplug_offset = PDC2_SATA_PLUG_CSR;
else
hotplug_offset = PDC_SATA_PLUG_CSR;
- hotplug_status = readl(mmio_base + hotplug_offset);
+ hotplug_status = readl(host_mmio + hotplug_offset);
if (hotplug_status & 0xff)
- writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
+ writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
hotplug_status &= 0xff; /* clear uninteresting bits */
/* reading should also clear interrupts */
- mask = readl(mmio_base + PDC_INT_SEQMASK);
+ mask = readl(host_mmio + PDC_INT_SEQMASK);
if (mask == 0xffffffff && hotplug_status == 0) {
VPRINTK("QUICK EXIT 2\n");
goto done_irq;
}
- mask &= 0xffff; /* only 16 tags possible */
+ mask &= 0xffff; /* only 16 SEQIDs possible */
if (mask == 0 && hotplug_status == 0) {
VPRINTK("QUICK EXIT 3\n");
goto done_irq;
}
- writel(mask, mmio_base + PDC_INT_SEQMASK);
+ writel(mask, host_mmio + PDC_INT_SEQMASK);
is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
return IRQ_RETVAL(handled);
}
-static inline void pdc_packet_start(struct ata_queued_cmd *qc)
+static void pdc_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct pdc_port_priv *pp = ap->private_data;
- void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
+ void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
unsigned int port_no = ap->port_no;
u8 seq = (u8) (port_no + 1);
VPRINTK("ENTER, ap %p\n", ap);
- writel(0x00000001, mmio + (seq * 4));
- readl(mmio + (seq * 4)); /* flush */
+ writel(0x00000001, host_mmio + (seq * 4));
+ readl(host_mmio + (seq * 4)); /* flush */
pp->pkt[2] = seq;
wmb(); /* flush PRD, pkt writes */
- writel(pp->pkt_dma, ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
+ writel(pp->pkt_dma, ata_mmio + PDC_PKT_SUBMIT);
+ readl(ata_mmio + PDC_PKT_SUBMIT); /* flush */
}
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
case ATA_PROT_DMA:
pdc_packet_start(qc);
return 0;
-
default:
break;
}
-
return ata_sff_qc_issue(qc);
}
static void pdc_host_init(struct ata_host *host)
{
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
int hotplug_offset;
u32 tmp;
*/
/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
- tmp = readl(mmio + PDC_FLASH_CTL);
+ tmp = readl(host_mmio + PDC_FLASH_CTL);
tmp |= 0x02000; /* bit 13 (enable bmr burst) */
if (!is_gen2)
tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
- writel(tmp, mmio + PDC_FLASH_CTL);
+ writel(tmp, host_mmio + PDC_FLASH_CTL);
/* clear plug/unplug flags for all ports */
- tmp = readl(mmio + hotplug_offset);
- writel(tmp | 0xff, mmio + hotplug_offset);
+ tmp = readl(host_mmio + hotplug_offset);
+ writel(tmp | 0xff, host_mmio + hotplug_offset);
/* unmask plug/unplug ints */
- tmp = readl(mmio + hotplug_offset);
- writel(tmp & ~0xff0000, mmio + hotplug_offset);
+ tmp = readl(host_mmio + hotplug_offset);
+ writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
/* don't initialise TBG or SLEW on 2nd generation chips */
if (is_gen2)
return;
/* reduce TBG clock to 133 Mhz. */
- tmp = readl(mmio + PDC_TBG_MODE);
+ tmp = readl(host_mmio + PDC_TBG_MODE);
tmp &= ~0x30000; /* clear bit 17, 16*/
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
- writel(tmp, mmio + PDC_TBG_MODE);
+ writel(tmp, host_mmio + PDC_TBG_MODE);
- readl(mmio + PDC_TBG_MODE); /* flush */
+ readl(host_mmio + PDC_TBG_MODE); /* flush */
msleep(10);
/* adjust slew rate control register. */
- tmp = readl(mmio + PDC_SLEW_CTL);
+ tmp = readl(host_mmio + PDC_SLEW_CTL);
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
- writel(tmp, mmio + PDC_SLEW_CTL);
+ writel(tmp, host_mmio + PDC_SLEW_CTL);
}
static int pdc_ata_init_one(struct pci_dev *pdev,
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
const struct ata_port_info *ppi[PDC_MAX_PORTS];
struct ata_host *host;
- void __iomem *base;
+ void __iomem *host_mmio;
int n_ports, i, rc;
int is_sataii_tx4;
pcim_pin_device(pdev);
if (rc)
return rc;
- base = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
+ host_mmio = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
/* determine port configuration and setup host */
n_ports = 2;
ppi[i] = pi;
if (pi->flags & PDC_FLAG_SATA_PATA) {
- u8 tmp = readb(base + PDC_FLASH_CTL+1);
+ u8 tmp = readb(host_mmio + PDC_FLASH_CTL + 1);
if (!(tmp & 0x80))
ppi[n_ports++] = pi + 1;
}
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
- unsigned int port_offset = 0x200 + ata_no * 0x80;
+ unsigned int ata_offset = 0x200 + ata_no * 0x80;
unsigned int scr_offset = 0x400 + ata_no * 0x100;
- pdc_ata_setup_port(ap, base + port_offset, base + scr_offset);
+ pdc_ata_setup_port(ap, host_mmio + ata_offset, host_mmio + scr_offset);
ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port");
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, ata_offset, "ata");
}
/* initialize adapter */
static void sil24_pmp_attach(struct ata_port *ap)
{
+ u32 *gscr = ap->link.device->gscr;
+
sil24_config_pmp(ap, 1);
sil24_init_port(ap);
+
+ if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
+ sata_pmp_gscr_devid(gscr) == 0x4140) {
+ ata_port_printk(ap, KERN_INFO,
+ "disabling NCQ support due to sil24-mv4140 quirk\n");
+ ap->flags &= ~ATA_FLAG_NCQ;
+ }
}
static void sil24_pmp_detach(struct ata_port *ap)
{
sil24_init_port(ap);
sil24_config_pmp(ap, 0);
+
+ ap->flags |= ATA_FLAG_NCQ;
}
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
-/* $Id: fore200e.h,v 1.4 2000/04/14 10:10:34 davem Exp $ */
#ifndef _FORE200E_H
#define _FORE200E_H
/*
- $Id: fore200e_mkfirm.c,v 1.1 2000/02/21 16:04:32 davem Exp $
-
mkfirm.c: generates a C readable file from a binary firmware image
Christophe Lizzi (lizzi@{csti.fr, cnam.fr}), June 1999.
-/* $Id: he.h,v 1.4 2003/05/06 22:48:00 chas Exp $ */
-
/*
he.h
/*******************************************************************
- * ident "$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*******************************************************************/
-static char const rcsid[] =
-"$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $";
-
#include <linux/module.h>
#include <linux/pci.h>
/*******************************************************************
- * ident "$Id: idt77252.h,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
spinlock_t rx_lock, misc_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
- u32 rx_pkt_ram, rx_tmp_cnt, rx_tmp_jif;
+ u32 rx_pkt_ram, rx_tmp_cnt;
+ unsigned long rx_tmp_jif;
void __iomem *RX_DESC_BASE_ADDR;
u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt;
struct atm_dev *next_board; /* other iphase devices */
*
* Modified to work with the IDT7721 nicstar -- AAL5 (tested) only.
*
- * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997 $Revision: 1.1 $ $Date: 1999/08/20 11:00:11 $
+ * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997
*
* Linux driver for the IDT77201 NICStAR PCI ATM controller.
* PHY component is expected to be 155 Mbps S/UNI-Lite or IDT 77155;
sysfs_remove_link(&dev->kobj, "subsystem");
}
+/**
+ * dev_set_name - set a device name
+ * @dev: device
+ */
+int dev_set_name(struct device *dev, const char *fmt, ...)
+{
+ va_list vargs;
+
+ va_start(vargs, fmt);
+ vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
+ va_end(vargs);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_set_name);
+
/**
* device_add - add device to device hierarchy.
* @dev: device.
}
/**
- * device_create - creates a device and registers it with sysfs
+ * device_create_vargs - creates a device and registers it with sysfs
* @class: pointer to the struct class that this device should be registered to
* @parent: pointer to the parent struct device of this new device, if any
* @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
* @fmt: string for the device's name
+ * @args: va_list for the device's name
*
* This function can be used by char device classes. A struct device
* will be created in sysfs, registered to the specified class.
* Note: the struct class passed to this function must have previously
* been created with a call to class_create().
*/
-struct device *device_create(struct class *class, struct device *parent,
- dev_t devt, const char *fmt, ...)
+struct device *device_create_vargs(struct class *class, struct device *parent,
+ dev_t devt, void *drvdata, const char *fmt,
+ va_list args)
{
- va_list args;
struct device *dev = NULL;
int retval = -ENODEV;
dev->class = class;
dev->parent = parent;
dev->release = device_create_release;
+ dev_set_drvdata(dev, drvdata);
- va_start(args, fmt);
vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
- va_end(args);
retval = device_register(dev);
if (retval)
goto error;
kfree(dev);
return ERR_PTR(retval);
}
+EXPORT_SYMBOL_GPL(device_create_vargs);
+
+/**
+ * device_create_drvdata - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create_drvdata(struct class *class,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+{
+ va_list vargs;
+ struct device *dev;
+
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, drvdata, fmt, vargs);
+ va_end(vargs);
+ return dev;
+}
+EXPORT_SYMBOL_GPL(device_create_drvdata);
+
+/**
+ * device_create - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create(struct class *class, struct device *parent,
+ dev_t devt, const char *fmt, ...)
+{
+ va_list vargs;
+ struct device *dev;
+
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, NULL, fmt, vargs);
+ va_end(vargs);
+ return dev;
+}
EXPORT_SYMBOL_GPL(device_create);
static int __match_devt(struct device *dev, void *data)
}
#else
if (dev->class) {
- sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
- if (error) {
- dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
- __func__, error);
- }
+ if (error)
+ goto out;
+ sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
}
#endif
int i, ret;
if (!MACH_IS_AMIGA)
- return -ENXIO;
+ return -ENODEV;
if (!AMIGAHW_PRESENT(AMI_FLOPPY))
- return -ENXIO;
+ return -ENODEV;
if (register_blkdev(FLOPPY_MAJOR,"fd"))
return -EBUSY;
if (!floppy_queue)
goto out_queue;
- ret = -ENXIO;
+ ret = -ENODEV;
if (fd_probe_drives() < 1) /* No usable drives */
goto out_probe;
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+MODULE_ALIAS("rd");
#ifndef MODULE
/* Legacy boot options - nonmodular */
disk->fops = &brd_fops;
disk->private_data = brd;
disk->queue = brd->brd_queue;
+ disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
sprintf(disk->disk_name, "ram%d", i);
set_capacity(disk, rd_size * 2);
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ /* If disk is read-only in the host, the guest should obey */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
+ set_disk_ro(vblk->disk, 1);
+
/* Host must always specify the capacity. */
vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
&cap, sizeof(cap));
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ del_gendisk(vblk->disk);
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
- VIRTIO_BLK_F_GEOMETRY,
+ VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
};
static struct virtio_driver virtio_blk = {
int ret;
if (!MACH_IS_AMIGA)
- return -ENXIO;
+ return -ENODEV;
ret = -EBUSY;
if (register_blkdev(Z2RAM_MAJOR, DEVICE_NAME))
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
order to become a dial-in server. If you have a card like that, say
Y here and read <file:Documentation/computone.txt>.
- To compile this driver as modules, choose M here: the
- modules will be called ip2 and ip2main.
+ To compile this driver as module, choose M here: the
+ module will be called ip2.
config ROCKETPORT
tristate "Comtrol RocketPort support"
enum drm_vblank_seq_type {
_DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */
_DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */
- _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */
_DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
_DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
_DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */
struct drm_wait_vblank_reply reply;
};
-enum drm_modeset_ctl_cmd {
- _DRM_PRE_MODESET = 1,
- _DRM_POST_MODESET = 2,
-};
-
-/**
- * DRM_IOCTL_MODESET_CTL ioctl argument type
- *
- * \sa drmModesetCtl().
- */
-struct drm_modeset_ctl {
- unsigned long arg;
- enum drm_modeset_ctl_cmd cmd;
-};
-
/**
* DRM_IOCTL_AGP_ENABLE ioctl argument type.
*
#define DRM_IOCTL_GET_CLIENT DRM_IOWR(0x05, struct drm_client)
#define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats)
#define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version)
-#define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl)
#define DRM_IOCTL_SET_UNIQUE DRM_IOW( 0x10, struct drm_unique)
#define DRM_IOCTL_AUTH_MAGIC DRM_IOW( 0x11, struct drm_auth)
#define DRIVER_HAVE_DMA 0x20
#define DRIVER_HAVE_IRQ 0x40
#define DRIVER_IRQ_SHARED 0x80
+#define DRIVER_IRQ_VBL 0x100
#define DRIVER_DMA_QUEUE 0x200
#define DRIVER_FB_DMA 0x400
+#define DRIVER_IRQ_VBL2 0x800
/***********************************************************************/
/** \name Begin the DRM... */
int (*context_dtor) (struct drm_device *dev, int context);
int (*kernel_context_switch) (struct drm_device *dev, int old,
int new);
- void (*kernel_context_switch_unlock) (struct drm_device * dev);
- /**
- * get_vblank_counter - get raw hardware vblank counter
- * @dev: DRM device
- * @crtc: counter to fetch
- *
- * Driver callback for fetching a raw hardware vblank counter
- * for @crtc. If a device doesn't have a hardware counter, the
- * driver can simply return the value of drm_vblank_count and
- * make the enable_vblank() and disable_vblank() hooks into no-ops,
- * leaving interrupts enabled at all times.
- *
- * Wraparound handling and loss of events due to modesetting is dealt
- * with in the DRM core code.
- *
- * RETURNS
- * Raw vblank counter value.
- */
- u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);
-
- /**
- * enable_vblank - enable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Enable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- *
- * RETURNS
- * Zero on success, appropriate errno if the given @crtc's vblank
- * interrupt cannot be enabled.
- */
- int (*enable_vblank) (struct drm_device *dev, int crtc);
-
- /**
- * disable_vblank - disable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Disable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- */
- void (*disable_vblank) (struct drm_device *dev, int crtc);
- int (*dri_library_name) (struct drm_device *dev, char * buf);
+ void (*kernel_context_switch_unlock) (struct drm_device *dev);
+ int (*vblank_wait) (struct drm_device *dev, unsigned int *sequence);
+ int (*vblank_wait2) (struct drm_device *dev, unsigned int *sequence);
+ int (*dri_library_name) (struct drm_device *dev, char *buf);
/**
* Called by \c drm_device_is_agp. Typically used to determine if a
irqreturn_t(*irq_handler) (DRM_IRQ_ARGS);
void (*irq_preinstall) (struct drm_device *dev);
- int (*irq_postinstall) (struct drm_device *dev);
+ void (*irq_postinstall) (struct drm_device *dev);
void (*irq_uninstall) (struct drm_device *dev);
void (*reclaim_buffers) (struct drm_device *dev,
struct drm_file * file_priv);
/** \name VBLANK IRQ support */
/*@{ */
- wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */
- atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
+ wait_queue_head_t vbl_queue; /**< VBLANK wait queue */
+ atomic_t vbl_received;
+ atomic_t vbl_received2; /**< number of secondary VBLANK interrupts */
spinlock_t vbl_lock;
- struct list_head *vbl_sigs; /**< signal list to send on VBLANK */
- atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/
- atomic_t *vblank_refcount; /* number of users of vblank interrupts per crtc */
- u32 *last_vblank; /* protected by dev->vbl_lock, used */
- /* for wraparound handling */
- u32 *vblank_offset; /* used to track how many vblanks */
- int *vblank_enabled; /* so we don't call enable more than
- once per disable */
- u32 *vblank_premodeset; /* were lost during modeset */
- struct timer_list vblank_disable_timer;
-
- unsigned long max_vblank_count; /**< size of vblank counter register */
+ struct list_head vbl_sigs; /**< signal list to send on VBLANK */
+ struct list_head vbl_sigs2; /**< signals to send on secondary VBLANK */
+ unsigned int vbl_pending;
spinlock_t tasklet_lock; /**< For drm_locked_tasklet */
void (*locked_tasklet_func)(struct drm_device *dev);
#ifdef __alpha__
struct pci_controller *hose;
#endif
- int num_crtcs; /**< Number of CRTCs on this device */
struct drm_sg_mem *sg; /**< Scatter gather memory */
void *dev_private; /**< device private data */
struct drm_sigdata sigdata; /**< For block_all_signals */
extern void drm_driver_irq_postinstall(struct drm_device *dev);
extern void drm_driver_irq_uninstall(struct drm_device *dev);
-extern int drm_vblank_init(struct drm_device *dev, int num_crtcs);
-extern int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *filp);
-extern int drm_vblank_wait(struct drm_device * dev, unsigned int *vbl_seq);
-extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*));
-extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
-extern void drm_update_vblank_count(struct drm_device *dev, int crtc);
-extern void drm_handle_vblank(struct drm_device *dev, int crtc);
-extern int drm_vblank_get(struct drm_device *dev, int crtc);
-extern void drm_vblank_put(struct drm_device *dev, int crtc);
-
- /* Modesetting support */
-extern int drm_modeset_ctl(struct drm_device *dev, void *data,
+extern int drm_wait_vblank(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
+extern void drm_vbl_send_signals(struct drm_device *dev);
+extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*));
/* AGP/GART support (drm_agpsupport.h) */
extern struct drm_agp_head *drm_agp_init(struct drm_device *dev);
struct drm_file *file_priv = filp->private_data;
struct drm_device *dev = file_priv->minor->dev;
int retcode = 0;
- unsigned long irqflags;
lock_kernel();
*/
do{
- spin_lock_irqsave(&dev->lock.spinlock,
- irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
locked = dev->lock.idle_has_lock;
- spin_unlock_irqrestore(&dev->lock.spinlock,
- irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
if (locked)
break;
schedule();
return 0;
}
-static void vblank_disable_fn(unsigned long arg)
-{
- struct drm_device *dev = (struct drm_device *)arg;
- unsigned long irqflags;
- int i;
-
- for (i = 0; i < dev->num_crtcs; i++) {
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- if (atomic_read(&dev->vblank_refcount[i]) == 0 &&
- dev->vblank_enabled[i]) {
- dev->driver->disable_vblank(dev, i);
- dev->vblank_enabled[i] = 0;
- }
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- }
-}
-
-static void drm_vblank_cleanup(struct drm_device *dev)
-{
- /* Bail if the driver didn't call drm_vblank_init() */
- if (dev->num_crtcs == 0)
- return;
-
- del_timer(&dev->vblank_disable_timer);
-
- vblank_disable_fn((unsigned long)dev);
-
- drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->vblank_premodeset, sizeof(*dev->vblank_premodeset) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_offset, sizeof(*dev->vblank_offset) * dev->num_crtcs,
- DRM_MEM_DRIVER);
-
- dev->num_crtcs = 0;
-}
-
-int drm_vblank_init(struct drm_device *dev, int num_crtcs)
-{
- int i, ret = -ENOMEM;
-
- setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
- (unsigned long)dev);
- spin_lock_init(&dev->vbl_lock);
- atomic_set(&dev->vbl_signal_pending, 0);
- dev->num_crtcs = num_crtcs;
-
- dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vbl_queue)
- goto err;
-
- dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vbl_sigs)
- goto err;
-
- dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->_vblank_count)
- goto err;
-
- dev->vblank_refcount = drm_alloc(sizeof(atomic_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vblank_refcount)
- goto err;
-
- dev->vblank_enabled = drm_calloc(num_crtcs, sizeof(int),
- DRM_MEM_DRIVER);
- if (!dev->vblank_enabled)
- goto err;
-
- dev->last_vblank = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER);
- if (!dev->last_vblank)
- goto err;
-
- dev->vblank_premodeset = drm_calloc(num_crtcs, sizeof(u32),
- DRM_MEM_DRIVER);
- if (!dev->vblank_premodeset)
- goto err;
-
- dev->vblank_offset = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER);
- if (!dev->vblank_offset)
- goto err;
-
- /* Zero per-crtc vblank stuff */
- for (i = 0; i < num_crtcs; i++) {
- init_waitqueue_head(&dev->vbl_queue[i]);
- INIT_LIST_HEAD(&dev->vbl_sigs[i]);
- atomic_set(&dev->_vblank_count[i], 0);
- atomic_set(&dev->vblank_refcount[i], 0);
- }
-
- return 0;
-
-err:
- drm_vblank_cleanup(dev);
- return ret;
-}
-EXPORT_SYMBOL(drm_vblank_init);
-
/**
* Install IRQ handler.
*
DRM_DEBUG("irq=%d\n", dev->irq);
+ if (drm_core_check_feature(dev, DRIVER_IRQ_VBL)) {
+ init_waitqueue_head(&dev->vbl_queue);
+
+ spin_lock_init(&dev->vbl_lock);
+
+ INIT_LIST_HEAD(&dev->vbl_sigs);
+ INIT_LIST_HEAD(&dev->vbl_sigs2);
+
+ dev->vbl_pending = 0;
+ }
+
/* Before installing handler */
dev->driver->irq_preinstall(dev);
}
/* After installing handler */
- ret = dev->driver->irq_postinstall(dev);
- if (ret < 0) {
- mutex_lock(&dev->struct_mutex);
- dev->irq_enabled = 0;
- mutex_unlock(&dev->struct_mutex);
- }
+ dev->driver->irq_postinstall(dev);
- return ret;
+ return 0;
}
/**
free_irq(dev->irq, dev);
- drm_vblank_cleanup(dev);
-
dev->locked_tasklet_func = NULL;
return 0;
}
}
-/**
- * drm_vblank_count - retrieve "cooked" vblank counter value
- * @dev: DRM device
- * @crtc: which counter to retrieve
- *
- * Fetches the "cooked" vblank count value that represents the number of
- * vblank events since the system was booted, including lost events due to
- * modesetting activity.
- */
-u32 drm_vblank_count(struct drm_device *dev, int crtc)
-{
- return atomic_read(&dev->_vblank_count[crtc]) +
- dev->vblank_offset[crtc];
-}
-EXPORT_SYMBOL(drm_vblank_count);
-
-/**
- * drm_update_vblank_count - update the master vblank counter
- * @dev: DRM device
- * @crtc: counter to update
- *
- * Call back into the driver to update the appropriate vblank counter
- * (specified by @crtc). Deal with wraparound, if it occurred, and
- * update the last read value so we can deal with wraparound on the next
- * call if necessary.
- */
-void drm_update_vblank_count(struct drm_device *dev, int crtc)
-{
- unsigned long irqflags;
- u32 cur_vblank, diff;
-
- /*
- * Interrupts were disabled prior to this call, so deal with counter
- * wrap if needed.
- * NOTE! It's possible we lost a full dev->max_vblank_count events
- * here if the register is small or we had vblank interrupts off for
- * a long time.
- */
- cur_vblank = dev->driver->get_vblank_counter(dev, crtc);
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- if (cur_vblank < dev->last_vblank[crtc]) {
- diff = dev->max_vblank_count -
- dev->last_vblank[crtc];
- diff += cur_vblank;
- } else {
- diff = cur_vblank - dev->last_vblank[crtc];
- }
- dev->last_vblank[crtc] = cur_vblank;
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
- atomic_add(diff, &dev->_vblank_count[crtc]);
-}
-EXPORT_SYMBOL(drm_update_vblank_count);
-
-/**
- * drm_vblank_get - get a reference count on vblank events
- * @dev: DRM device
- * @crtc: which CRTC to own
- *
- * Acquire a reference count on vblank events to avoid having them disabled
- * while in use. Note callers will probably want to update the master counter
- * using drm_update_vblank_count() above before calling this routine so that
- * wakeups occur on the right vblank event.
- *
- * RETURNS
- * Zero on success, nonzero on failure.
- */
-int drm_vblank_get(struct drm_device *dev, int crtc)
-{
- unsigned long irqflags;
- int ret = 0;
-
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- /* Going from 0->1 means we have to enable interrupts again */
- if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1 &&
- !dev->vblank_enabled[crtc]) {
- ret = dev->driver->enable_vblank(dev, crtc);
- if (ret)
- atomic_dec(&dev->vblank_refcount[crtc]);
- else
- dev->vblank_enabled[crtc] = 1;
- }
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
- return ret;
-}
-EXPORT_SYMBOL(drm_vblank_get);
-
-/**
- * drm_vblank_put - give up ownership of vblank events
- * @dev: DRM device
- * @crtc: which counter to give up
- *
- * Release ownership of a given vblank counter, turning off interrupts
- * if possible.
- */
-void drm_vblank_put(struct drm_device *dev, int crtc)
-{
- /* Last user schedules interrupt disable */
- if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
- mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
-}
-EXPORT_SYMBOL(drm_vblank_put);
-
-/**
- * drm_modeset_ctl - handle vblank event counter changes across mode switch
- * @DRM_IOCTL_ARGS: standard ioctl arguments
- *
- * Applications should call the %_DRM_PRE_MODESET and %_DRM_POST_MODESET
- * ioctls around modesetting so that any lost vblank events are accounted for.
- */
-int drm_modeset_ctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_modeset_ctl *modeset = data;
- int crtc, ret = 0;
- u32 new;
-
- crtc = modeset->arg;
- if (crtc >= dev->num_crtcs) {
- ret = -EINVAL;
- goto out;
- }
-
- switch (modeset->cmd) {
- case _DRM_PRE_MODESET:
- dev->vblank_premodeset[crtc] =
- dev->driver->get_vblank_counter(dev, crtc);
- break;
- case _DRM_POST_MODESET:
- new = dev->driver->get_vblank_counter(dev, crtc);
- dev->vblank_offset[crtc] = dev->vblank_premodeset[crtc] - new;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
-out:
- return ret;
-}
-
/**
* Wait for VBLANK.
*
*
* If a signal is not requested, then calls vblank_wait().
*/
-int drm_wait_vblank(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
union drm_wait_vblank *vblwait = data;
struct timeval now;
int ret = 0;
- unsigned int flags, seq, crtc;
+ unsigned int flags, seq;
if ((!dev->irq) || (!dev->irq_enabled))
return -EINVAL;
}
flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK;
- crtc = flags & _DRM_VBLANK_SECONDARY ? 1 : 0;
- if (crtc >= dev->num_crtcs)
+ if (!drm_core_check_feature(dev, (flags & _DRM_VBLANK_SECONDARY) ?
+ DRIVER_IRQ_VBL2 : DRIVER_IRQ_VBL))
return -EINVAL;
- drm_update_vblank_count(dev, crtc);
- seq = drm_vblank_count(dev, crtc);
+ seq = atomic_read((flags & _DRM_VBLANK_SECONDARY) ? &dev->vbl_received2
+ : &dev->vbl_received);
switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) {
case _DRM_VBLANK_RELATIVE:
if (flags & _DRM_VBLANK_SIGNAL) {
unsigned long irqflags;
- struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
+ struct list_head *vbl_sigs = (flags & _DRM_VBLANK_SECONDARY)
+ ? &dev->vbl_sigs2 : &dev->vbl_sigs;
struct drm_vbl_sig *vbl_sig;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
}
}
- if (atomic_read(&dev->vbl_signal_pending) >= 100) {
+ if (dev->vbl_pending >= 100) {
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
return -EBUSY;
}
+ dev->vbl_pending++;
+
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- if (!vbl_sig)
+ if (!
+ (vbl_sig =
+ drm_alloc(sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER))) {
return -ENOMEM;
-
- ret = drm_vblank_get(dev, crtc);
- if (ret) {
- drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- return ret;
}
- atomic_inc(&dev->vbl_signal_pending);
+ memset((void *)vbl_sig, 0, sizeof(*vbl_sig));
vbl_sig->sequence = vblwait->request.sequence;
vbl_sig->info.si_signo = vblwait->request.signal;
vblwait->reply.sequence = seq;
} else {
- unsigned long cur_vblank;
-
- ret = drm_vblank_get(dev, crtc);
- if (ret)
- return ret;
- DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
- (((cur_vblank = drm_vblank_count(dev, crtc))
- - vblwait->request.sequence) <= (1 << 23)));
- drm_vblank_put(dev, crtc);
- do_gettimeofday(&now);
+ if (flags & _DRM_VBLANK_SECONDARY) {
+ if (dev->driver->vblank_wait2)
+ ret = dev->driver->vblank_wait2(dev, &vblwait->request.sequence);
+ } else if (dev->driver->vblank_wait)
+ ret =
+ dev->driver->vblank_wait(dev,
+ &vblwait->request.sequence);
+ do_gettimeofday(&now);
vblwait->reply.tval_sec = now.tv_sec;
vblwait->reply.tval_usec = now.tv_usec;
- vblwait->reply.sequence = cur_vblank;
}
done:
* Send the VBLANK signals.
*
* \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
*
* Sends a signal for each task in drm_device::vbl_sigs and empties the list.
*
* If a signal is not requested, then calls vblank_wait().
*/
-static void drm_vbl_send_signals(struct drm_device * dev, int crtc)
+void drm_vbl_send_signals(struct drm_device * dev)
{
- struct drm_vbl_sig *vbl_sig, *tmp;
- struct list_head *vbl_sigs;
- unsigned int vbl_seq;
unsigned long flags;
+ int i;
spin_lock_irqsave(&dev->vbl_lock, flags);
- vbl_sigs = &dev->vbl_sigs[crtc];
- vbl_seq = drm_vblank_count(dev, crtc);
+ for (i = 0; i < 2; i++) {
+ struct drm_vbl_sig *vbl_sig, *tmp;
+ struct list_head *vbl_sigs = i ? &dev->vbl_sigs2 : &dev->vbl_sigs;
+ unsigned int vbl_seq = atomic_read(i ? &dev->vbl_received2 :
+ &dev->vbl_received);
- list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
- if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
- vbl_sig->info.si_code = vbl_seq;
- send_sig_info(vbl_sig->info.si_signo,
- &vbl_sig->info, vbl_sig->task);
+ list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
+ if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
+ vbl_sig->info.si_code = vbl_seq;
+ send_sig_info(vbl_sig->info.si_signo,
+ &vbl_sig->info, vbl_sig->task);
- list_del(&vbl_sig->head);
+ list_del(&vbl_sig->head);
- drm_free(vbl_sig, sizeof(*vbl_sig),
- DRM_MEM_DRIVER);
- atomic_dec(&dev->vbl_signal_pending);
- drm_vblank_put(dev, crtc);
- }
+ drm_free(vbl_sig, sizeof(*vbl_sig),
+ DRM_MEM_DRIVER);
+
+ dev->vbl_pending--;
+ }
+ }
}
spin_unlock_irqrestore(&dev->vbl_lock, flags);
}
-/**
- * drm_handle_vblank - handle a vblank event
- * @dev: DRM device
- * @crtc: where this event occurred
- *
- * Drivers should call this routine in their vblank interrupt handlers to
- * update the vblank counter and send any signals that may be pending.
- */
-void drm_handle_vblank(struct drm_device *dev, int crtc)
-{
- drm_update_vblank_count(dev, crtc);
- DRM_WAKEUP(&dev->vbl_queue[crtc]);
- drm_vbl_send_signals(dev, crtc);
-}
-EXPORT_SYMBOL(drm_handle_vblank);
+EXPORT_SYMBOL(drm_vbl_send_signals);
/**
* Tasklet wrapper function.
DECLARE_WAITQUEUE(entry, current);
struct drm_lock *lock = data;
int ret = 0;
- unsigned long irqflags;
++file_priv->lock_count;
return -EINVAL;
add_wait_queue(&dev->lock.lock_queue, &entry);
- spin_lock_irqsave(&dev->lock.spinlock, irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
dev->lock.user_waiters++;
- spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
if (!dev->lock.hw_lock) {
break;
}
}
- spin_lock_irqsave(&dev->lock.spinlock, irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
dev->lock.user_waiters--;
- spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->lock.lock_queue, &entry);
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
do {
old = *lock;
if (old & _DRM_LOCK_HELD)
}
prev = cmpxchg(lock, old, new);
} while (prev != old);
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
if (_DRM_LOCKING_CONTEXT(old) == context) {
if (old & _DRM_LOCK_HELD) {
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (lock_data->kernel_waiters != 0) {
drm_lock_transfer(lock_data, 0);
lock_data->idle_has_lock = 1;
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
return 1;
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
do {
old = *lock;
void drm_idlelock_take(struct drm_lock_data *lock_data)
{
int ret = 0;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
lock_data->kernel_waiters++;
if (!lock_data->idle_has_lock) {
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
ret = drm_lock_take(lock_data, DRM_KERNEL_CONTEXT);
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (ret == 1)
lock_data->idle_has_lock = 1;
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
}
EXPORT_SYMBOL(drm_idlelock_take);
{
unsigned int old, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (--lock_data->kernel_waiters == 0) {
if (lock_data->idle_has_lock) {
do {
lock_data->idle_has_lock = 0;
}
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
}
EXPORT_SYMBOL(drm_idlelock_release);
struct drm_minor *drm_minor = to_drm_minor(dev);
struct drm_device *drm_dev = drm_minor->dev;
- printk(KERN_ERR "%s\n", __func__);
-
if (drm_dev->driver->suspend)
return drm_dev->driver->suspend(drm_dev, state);
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
- if (++dev_priv->counter > BREADCRUMB_MASK) {
- dev_priv->counter = 1;
- DRM_DEBUG("Breadcrumb counter wrapped around\n");
- }
+ dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter;
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
+ if (dev_priv->counter > 0x7FFFFFFFUL)
+ dev_priv->sarea_priv->last_enqueue = dev_priv->counter = 1;
BEGIN_LP_RING(4);
OUT_RING(CMD_STORE_DWORD_IDX);
ADVANCE_LP_RING();
}
-int i915_emit_mi_flush(struct drm_device *dev, uint32_t flush)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t flush_cmd = CMD_MI_FLUSH;
- RING_LOCALS;
-
- flush_cmd |= flush;
-
- i915_kernel_lost_context(dev);
-
- BEGIN_LP_RING(4);
- OUT_RING(flush_cmd);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(0);
- ADVANCE_LP_RING();
-
- return 0;
-}
-
static int i915_dispatch_cmdbuffer(struct drm_device * dev,
drm_i915_cmdbuffer_t * cmd)
{
return 0;
}
-static void i915_do_dispatch_flip(struct drm_device * dev, int plane, int sync)
+static int i915_dispatch_flip(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- u32 num_pages, current_page, next_page, dspbase;
- int shift = 2 * plane, x, y;
RING_LOCALS;
- /* Calculate display base offset */
- num_pages = dev_priv->sarea_priv->third_handle ? 3 : 2;
- current_page = (dev_priv->sarea_priv->pf_current_page >> shift) & 0x3;
- next_page = (current_page + 1) % num_pages;
+ DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n",
+ __FUNCTION__,
+ dev_priv->current_page,
+ dev_priv->sarea_priv->pf_current_page);
- switch (next_page) {
- default:
- case 0:
- dspbase = dev_priv->sarea_priv->front_offset;
- break;
- case 1:
- dspbase = dev_priv->sarea_priv->back_offset;
- break;
- case 2:
- dspbase = dev_priv->sarea_priv->third_offset;
- break;
- }
+ i915_kernel_lost_context(dev);
+
+ BEGIN_LP_RING(2);
+ OUT_RING(INST_PARSER_CLIENT | INST_OP_FLUSH | INST_FLUSH_MAP_CACHE);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
- if (plane == 0) {
- x = dev_priv->sarea_priv->planeA_x;
- y = dev_priv->sarea_priv->planeA_y;
+ BEGIN_LP_RING(6);
+ OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
+ OUT_RING(0);
+ if (dev_priv->current_page == 0) {
+ OUT_RING(dev_priv->back_offset);
+ dev_priv->current_page = 1;
} else {
- x = dev_priv->sarea_priv->planeB_x;
- y = dev_priv->sarea_priv->planeB_y;
+ OUT_RING(dev_priv->front_offset);
+ dev_priv->current_page = 0;
}
+ OUT_RING(0);
+ ADVANCE_LP_RING();
- dspbase += (y * dev_priv->sarea_priv->pitch + x) * dev_priv->cpp;
+ BEGIN_LP_RING(2);
+ OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
- DRM_DEBUG("plane=%d current_page=%d dspbase=0x%x\n", plane, current_page,
- dspbase);
+ dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
BEGIN_LP_RING(4);
- OUT_RING(sync ? 0 :
- (MI_WAIT_FOR_EVENT | (plane ? MI_WAIT_FOR_PLANE_B_FLIP :
- MI_WAIT_FOR_PLANE_A_FLIP)));
- OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | (sync ? 0 : ASYNC_FLIP) |
- (plane ? DISPLAY_PLANE_B : DISPLAY_PLANE_A));
- OUT_RING(dev_priv->sarea_priv->pitch * dev_priv->cpp);
- OUT_RING(dspbase);
+ OUT_RING(CMD_STORE_DWORD_IDX);
+ OUT_RING(20);
+ OUT_RING(dev_priv->counter);
+ OUT_RING(0);
ADVANCE_LP_RING();
- dev_priv->sarea_priv->pf_current_page &= ~(0x3 << shift);
- dev_priv->sarea_priv->pf_current_page |= next_page << shift;
-}
-
-void i915_dispatch_flip(struct drm_device * dev, int planes, int sync)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- int i;
-
- DRM_DEBUG("planes=0x%x pfCurrentPage=%d\n",
- planes, dev_priv->sarea_priv->pf_current_page);
-
- i915_emit_mi_flush(dev, MI_READ_FLUSH | MI_EXE_FLUSH);
-
- for (i = 0; i < 2; i++)
- if (planes & (1 << i))
- i915_do_dispatch_flip(dev, i, sync);
-
- i915_emit_breadcrumb(dev);
-
+ dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
+ return 0;
}
static int i915_quiescent(struct drm_device * dev)
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
ret = i915_dispatch_batchbuffer(dev, batch);
- sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+ sarea_priv->last_dispatch = (int)hw_status[5];
return ret;
}
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
return ret;
}
- sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
- return 0;
-}
-
-static int i915_do_cleanup_pageflip(struct drm_device * dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- int i, planes, num_pages = dev_priv->sarea_priv->third_handle ? 3 : 2;
-
- DRM_DEBUG("\n");
-
- for (i = 0, planes = 0; i < 2; i++)
- if (dev_priv->sarea_priv->pf_current_page & (0x3 << (2 * i))) {
- dev_priv->sarea_priv->pf_current_page =
- (dev_priv->sarea_priv->pf_current_page &
- ~(0x3 << (2 * i))) | ((num_pages - 1) << (2 * i));
-
- planes |= 1 << i;
- }
-
- if (planes)
- i915_dispatch_flip(dev, planes, 0);
-
+ sarea_priv->last_dispatch = (int)hw_status[5];
return 0;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_flip_t *param = data;
-
- DRM_DEBUG("\n");
+ DRM_DEBUG("%s\n", __FUNCTION__);
LOCK_TEST_WITH_RETURN(dev, file_priv);
- /* This is really planes */
- if (param->pipes & ~0x3) {
- DRM_ERROR("Invalid planes 0x%x, only <= 0x3 is valid\n",
- param->pipes);
- return -EINVAL;
- }
-
- i915_dispatch_flip(dev, param->pipes, 0);
-
- return 0;
+ return i915_dispatch_flip(dev);
}
static int i915_getparam(struct drm_device *dev, void *data,
if (!dev_priv)
return;
- if (drm_getsarea(dev) && dev_priv->sarea_priv)
- i915_do_cleanup_pageflip(dev);
if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
unsigned int rotated_tiled;
unsigned int rotated2_tiled;
- int planeA_x;
- int planeA_y;
- int planeA_w;
- int planeA_h;
- int planeB_x;
- int planeB_y;
- int planeB_w;
- int planeB_h;
-
- /* Triple buffering */
- drm_handle_t third_handle;
- int third_offset;
- int third_size;
- unsigned int third_tiled;
-
- /* buffer object handles for the static buffers. May change
- * over the lifetime of the client, though it doesn't in our current
- * implementation.
- */
- unsigned int front_bo_handle;
- unsigned int back_bo_handle;
- unsigned int third_bo_handle;
- unsigned int depth_bo_handle;
+ int pipeA_x;
+ int pipeA_y;
+ int pipeA_w;
+ int pipeA_h;
+ int pipeB_x;
+ int pipeB_y;
+ int pipeB_w;
+ int pipeB_h;
} drm_i915_sarea_t;
/* Flags for perf_boxes
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
-#define DRM_IOCTL_I915_FLIP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FLIP, drm_i915_flip_t)
+#define DRM_IOCTL_I915_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
#define DRM_IOCTL_I915_BATCHBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
#define DRM_IOCTL_I915_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
#define DRM_IOCTL_I915_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
#define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
-/* Asynchronous page flipping:
- */
-typedef struct drm_i915_flip {
- /*
- * This is really talking about planes, and we could rename it
- * except for the fact that some of the duplicated i915_drm.h files
- * out there check for HAVE_I915_FLIP and so might pick up this
- * version.
- */
- int pipes;
-} drm_i915_flip_t;
-
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
*/
i915_write_indexed(cr_index, cr_data, 0x11,
i915_read_indexed(cr_index, cr_data, 0x11) &
(~0x80));
- for (i = 0; i < 0x24; i++)
+ for (i = 0; i <= 0x24; i++)
dev_priv->saveCR[i] =
i915_read_indexed(cr_index, cr_data, i);
/* Make sure we don't turn off CR group 0 writes */
/* Attribute controller registers */
inb(st01);
dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX);
- for (i = 0; i < 20; i++)
+ for (i = 0; i <= 0x14; i++)
dev_priv->saveAR[i] = i915_read_ar(st01, i, 0);
inb(st01);
outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX);
/* CRT controller regs */
/* Enable CR group 0 writes */
i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]);
- for (i = 0; i < 0x24; i++)
+ for (i = 0; i <= 0x24; i++)
i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]);
/* Graphics controller regs */
/* Attribute controller registers */
inb(st01);
- for (i = 0; i < 20; i++)
+ for (i = 0; i <= 0x14; i++)
i915_write_ar(st01, i, dev_priv->saveAR[i], 0);
inb(st01); /* switch back to index mode */
outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX);
pci_save_state(dev->pdev);
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+ /* Display arbitration control */
+ dev_priv->saveDSPARB = I915_READ(DSPARB);
+
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
/* Clock gating state */
+ dev_priv->saveD_STATE = I915_READ(D_STATE);
dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D);
/* Cache mode state */
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+ I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
udelay(150);
/* Clock gating state */
+ I915_WRITE (D_STATE, dev_priv->saveD_STATE);
I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D);
/* Cache mode state */
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
- DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL |
+ DRIVER_IRQ_VBL2,
.load = i915_driver_load,
.unload = i915_driver_unload,
.lastclose = i915_driver_lastclose,
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
- .get_vblank_counter = i915_get_vblank_counter,
- .enable_vblank = i915_enable_vblank,
- .disable_vblank = i915_disable_vblank,
+ .vblank_wait = i915_driver_vblank_wait,
+ .vblank_wait2 = i915_driver_vblank_wait2,
.irq_preinstall = i915_driver_irq_preinstall,
.irq_postinstall = i915_driver_irq_postinstall,
.irq_uninstall = i915_driver_irq_uninstall,
typedef struct _drm_i915_vbl_swap {
struct list_head head;
drm_drawable_t drw_id;
- unsigned int plane;
+ unsigned int pipe;
unsigned int sequence;
- int flip;
} drm_i915_vbl_swap_t;
typedef struct drm_i915_private {
drm_dma_handle_t *status_page_dmah;
void *hw_status_page;
dma_addr_t dma_status_page;
- uint32_t counter;
+ unsigned long counter;
unsigned int status_gfx_addr;
drm_local_map_t hws_map;
wait_queue_head_t irq_queue;
atomic_t irq_received;
- atomic_t irq_emited;
+ atomic_t irq_emitted;
int tex_lru_log_granularity;
int allow_batchbuffer;
struct mem_block *agp_heap;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
- spinlock_t user_irq_lock;
- int user_irq_refcount;
- int fence_irq_on;
- uint32_t irq_enable_reg;
- int irq_enabled;
spinlock_t swaps_lock;
drm_i915_vbl_swap_t vbl_swaps;
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
+ u32 saveDSPARB;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
u32 saveIIR;
u32 saveIMR;
u32 saveCACHE_MODE_0;
+ u32 saveD_STATE;
u32 saveDSPCLK_GATE_D;
u32 saveMI_ARB_STATE;
u32 saveSWF0[16];
u8 saveSR[8];
u8 saveGR[25];
u8 saveAR_INDEX;
- u8 saveAR[20];
+ u8 saveAR[21];
u8 saveDACMASK;
u8 saveDACDATA[256*3]; /* 256 3-byte colors */
- u8 saveCR[36];
+ u8 saveCR[37];
} drm_i915_private_t;
extern struct drm_ioctl_desc i915_ioctls[];
extern int i915_driver_device_is_agp(struct drm_device * dev);
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
-extern void i915_dispatch_flip(struct drm_device * dev, int pipes, int sync);
+
/* i915_irq.c */
extern int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
extern void i915_driver_irq_preinstall(struct drm_device * dev);
-extern int i915_driver_irq_postinstall(struct drm_device * dev);
+extern void i915_driver_irq_postinstall(struct drm_device * dev);
extern void i915_driver_irq_uninstall(struct drm_device * dev);
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv);
struct drm_file *file_priv);
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern int i915_enable_vblank(struct drm_device *dev, int crtc);
-extern void i915_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
/* Interrupt bits:
*/
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14)
-#define I915_HWB_OOM_INTERRUPT (1<<13) /* binner out of memory */
-#define I915_SYNC_STATUS_INTERRUPT (1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DEBUG_INTERRUPT (1<<2)
-#define I915_USER_INTERRUPT (1<<1)
-
+#define USER_INT_FLAG (1<<1)
+#define VSYNC_PIPEB_FLAG (1<<5)
+#define VSYNC_PIPEA_FLAG (1<<7)
+#define HWB_OOM_FLAG (1<<13) /* binner out of memory */
#define I915REG_HWSTAM 0x02098
#define I915REG_INT_IDENTITY_R 0x020a4
#define I915REG_INT_MASK_R 0x020a8
#define I915REG_INT_ENABLE_R 0x020a0
-#define I915REG_INSTPM 0x020c0
-
-#define PIPEADSL 0x70000
-#define PIPEBDSL 0x71000
#define I915REG_PIPEASTAT 0x70024
#define I915REG_PIPEBSTAT 0x71024
-/*
- * The two pipe frame counter registers are not synchronized, so
- * reading a stable value is somewhat tricky. The following code
- * should work:
- *
- * do {
- * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- * PIPE_FRAME_HIGH_SHIFT;
- * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
- * PIPE_FRAME_LOW_SHIFT);
- * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- * PIPE_FRAME_HIGH_SHIFT);
- * } while (high1 != high2);
- * frame = (high1 << 8) | low1;
- */
-#define PIPEAFRAMEHIGH 0x70040
-#define PIPEBFRAMEHIGH 0x71040
-#define PIPE_FRAME_HIGH_MASK 0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT 0
-#define PIPEAFRAMEPIXEL 0x70044
-#define PIPEBFRAMEPIXEL 0x71044
-#define PIPE_FRAME_LOW_MASK 0xff000000
-#define PIPE_FRAME_LOW_SHIFT 24
-/*
- * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register
- * and is 24 bits wide.
- */
-#define PIPE_PIXEL_MASK 0x00ffffff
-#define PIPE_PIXEL_SHIFT 0
-
-#define I915_FIFO_UNDERRUN_STATUS (1UL<<31)
-#define I915_CRC_ERROR_ENABLE (1UL<<29)
-#define I915_CRC_DONE_ENABLE (1UL<<28)
-#define I915_GMBUS_EVENT_ENABLE (1UL<<27)
-#define I915_VSYNC_INTERRUPT_ENABLE (1UL<<25)
-#define I915_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
-#define I915_DPST_EVENT_ENABLE (1UL<<23)
-#define I915_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
-#define I915_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
-#define I915_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
-#define I915_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
-#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
-#define I915_OVERLAY_UPDATED_ENABLE (1UL<<16)
-#define I915_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
-#define I915_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
-#define I915_GMBUS_INTERRUPT_STATUS (1UL<<11)
-#define I915_VSYNC_INTERRUPT_STATUS (1UL<<9)
-#define I915_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
-#define I915_DPST_EVENT_STATUS (1UL<<7)
-#define I915_LEGACY_BLC_EVENT_STATUS (1UL<<6)
-#define I915_ODD_FIELD_INTERRUPT_STATUS (1UL<<5)
-#define I915_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4)
-#define I915_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
-#define I915_VBLANK_INTERRUPT_STATUS (1UL<<1)
-#define I915_OVERLAY_UPDATED_STATUS (1UL<<0)
+#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
+#define I915_VBLANK_CLEAR (1UL<<1)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
/** P1 value is 2 greater than this field */
# define VGA0_PD_P1_MASK (0x1f << 0)
+/* PCI D state control register */
+#define D_STATE 0x6104
#define DSPCLK_GATE_D 0x6200
/* I830 CRTC registers */
#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
+#define DSPARB 0x70030
+#define DSPARB_CSTART_MASK (0x7f << 7)
+#define DSPARB_CSTART_SHIFT 7
+#define DSPARB_BSTART_MASK (0x7f)
+#define DSPARB_BSTART_SHIFT 0
+
#define PIPEBCONF 0x71008
#define PIPEBCONF_ENABLE (1<<31)
#define PIPEBCONF_DISABLE 0
#define MAX_NOPID ((u32)~0)
-/**
- * i915_get_pipe - return the the pipe associated with a given plane
- * @dev: DRM device
- * @plane: plane to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a pipe number, since they may not always be equal. This routine
- * maps the given @plane back to a pipe number.
- */
-static int
-i915_get_pipe(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 dspcntr;
-
- dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR);
-
- return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0;
-}
-
-/**
- * i915_get_plane - return the the plane associated with a given pipe
- * @dev: DRM device
- * @pipe: pipe to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a plane number, since they may not always be equal. This routine
- * maps the given @pipe back to a plane number.
- */
-static int
-i915_get_plane(struct drm_device *dev, int pipe)
-{
- if (i915_get_pipe(dev, 0) == pipe)
- return 0;
- return 1;
-}
-
-/**
- * i915_pipe_enabled - check if a pipe is enabled
- * @dev: DRM device
- * @pipe: pipe to check
- *
- * Reading certain registers when the pipe is disabled can hang the chip.
- * Use this routine to make sure the PLL is running and the pipe is active
- * before reading such registers if unsure.
- */
-static int
-i915_pipe_enabled(struct drm_device *dev, int pipe)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
-
- if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
- return 1;
-
- return 0;
-}
-
-/**
- * Emit a synchronous flip.
- *
- * This function must be called with the drawable spinlock held.
- */
-static void
-i915_dispatch_vsync_flip(struct drm_device *dev, struct drm_drawable_info *drw,
- int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u16 x1, y1, x2, y2;
- int pf_planes = 1 << plane;
-
- /* If the window is visible on the other plane, we have to flip on that
- * plane as well.
- */
- if (plane == 1) {
- x1 = sarea_priv->planeA_x;
- y1 = sarea_priv->planeA_y;
- x2 = x1 + sarea_priv->planeA_w;
- y2 = y1 + sarea_priv->planeA_h;
- } else {
- x1 = sarea_priv->planeB_x;
- y1 = sarea_priv->planeB_y;
- x2 = x1 + sarea_priv->planeB_w;
- y2 = y1 + sarea_priv->planeB_h;
- }
-
- if (x2 > 0 && y2 > 0) {
- int i, num_rects = drw->num_rects;
- struct drm_clip_rect *rect = drw->rects;
-
- for (i = 0; i < num_rects; i++)
- if (!(rect[i].x1 >= x2 || rect[i].y1 >= y2 ||
- rect[i].x2 <= x1 || rect[i].y2 <= y1)) {
- pf_planes = 0x3;
-
- break;
- }
- }
-
- i915_dispatch_flip(dev, pf_planes, 1);
-}
-
/**
* Emit blits for scheduled buffer swaps.
*
static void i915_vblank_tasklet(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
struct list_head *list, *tmp, hits, *hit;
- int nhits, nrects, slice[2], upper[2], lower[2], i, num_pages;
- unsigned counter[2];
+ int nhits, nrects, slice[2], upper[2], lower[2], i;
+ unsigned counter[2] = { atomic_read(&dev->vbl_received),
+ atomic_read(&dev->vbl_received2) };
struct drm_drawable_info *drw;
drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp, offsets[3];
+ u32 cpp = dev_priv->cpp;
u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
XY_SRC_COPY_BLT_WRITE_ALPHA |
XY_SRC_COPY_BLT_WRITE_RGB)
: XY_SRC_COPY_BLT_CMD;
u32 src_pitch = sarea_priv->pitch * cpp;
u32 dst_pitch = sarea_priv->pitch * cpp;
- /* COPY rop (0xcc), map cpp to magic color depth constants */
u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
RING_LOCALS;
src_pitch >>= 2;
}
- counter[0] = drm_vblank_count(dev, 0);
- counter[1] = drm_vblank_count(dev, 1);
-
DRM_DEBUG("\n");
INIT_LIST_HEAD(&hits);
nhits = nrects = 0;
- /* No irqsave/restore necessary. This tasklet may be run in an
- * interrupt context or normal context, but we don't have to worry
- * about getting interrupted by something acquiring the lock, because
- * we are the interrupt context thing that acquires the lock.
- */
- spin_lock(&dev_priv->swaps_lock);
+ spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
/* Find buffer swaps scheduled for this vertical blank */
list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
drm_i915_vbl_swap_t *vbl_swap =
list_entry(list, drm_i915_vbl_swap_t, head);
- int pipe = i915_get_pipe(dev, vbl_swap->plane);
- if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
+ if ((counter[vbl_swap->pipe] - vbl_swap->sequence) > (1<<23))
continue;
list_del(list);
dev_priv->swaps_pending--;
- drm_vblank_put(dev, pipe);
spin_unlock(&dev_priv->swaps_lock);
spin_lock(&dev->drw_lock);
spin_lock(&dev_priv->swaps_lock);
}
- spin_unlock(&dev_priv->swaps_lock);
-
- if (nhits == 0)
+ if (nhits == 0) {
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
return;
+ }
+
+ spin_unlock(&dev_priv->swaps_lock);
i915_kernel_lost_context(dev);
- upper[0] = upper[1] = 0;
- slice[0] = max(sarea_priv->planeA_h / nhits, 1);
- slice[1] = max(sarea_priv->planeB_h / nhits, 1);
- lower[0] = sarea_priv->planeA_y + slice[0];
- lower[1] = sarea_priv->planeB_y + slice[0];
+ if (IS_I965G(dev)) {
+ BEGIN_LP_RING(4);
+
+ OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
+ OUT_RING(0);
+ OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16));
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else {
+ BEGIN_LP_RING(6);
- offsets[0] = sarea_priv->front_offset;
- offsets[1] = sarea_priv->back_offset;
- offsets[2] = sarea_priv->third_offset;
- num_pages = sarea_priv->third_handle ? 3 : 2;
+ OUT_RING(GFX_OP_DRAWRECT_INFO);
+ OUT_RING(0);
+ OUT_RING(0);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+ }
+
+ sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+
+ upper[0] = upper[1] = 0;
+ slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
+ slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
+ lower[0] = sarea_priv->pipeA_y + slice[0];
+ lower[1] = sarea_priv->pipeB_y + slice[0];
spin_lock(&dev->drw_lock);
for (i = 0; i++ < nhits;
upper[0] = lower[0], lower[0] += slice[0],
upper[1] = lower[1], lower[1] += slice[1]) {
- int init_drawrect = 1;
-
if (i == nhits)
lower[0] = lower[1] = sarea_priv->height;
drm_i915_vbl_swap_t *swap_hit =
list_entry(hit, drm_i915_vbl_swap_t, head);
struct drm_clip_rect *rect;
- int num_rects, plane, front, back;
+ int num_rects, pipe;
unsigned short top, bottom;
drw = drm_get_drawable_info(dev, swap_hit->drw_id);
if (!drw)
continue;
- plane = swap_hit->plane;
-
- if (swap_hit->flip) {
- i915_dispatch_vsync_flip(dev, drw, plane);
- continue;
- }
-
- if (init_drawrect) {
- int width = sarea_priv->width;
- int height = sarea_priv->height;
- if (IS_I965G(dev)) {
- BEGIN_LP_RING(4);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
- OUT_RING(0);
- OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(6);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
- OUT_RING(0);
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- }
-
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
- init_drawrect = 0;
- }
-
rect = drw->rects;
- top = upper[plane];
- bottom = lower[plane];
-
- front = (dev_priv->sarea_priv->pf_current_page >>
- (2 * plane)) & 0x3;
- back = (front + 1) % num_pages;
+ pipe = swap_hit->pipe;
+ top = upper[pipe];
+ bottom = lower[pipe];
for (num_rects = drw->num_rects; num_rects--; rect++) {
int y1 = max(rect->y1, top);
OUT_RING(ropcpp | dst_pitch);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING((y2 << 16) | rect->x2);
- OUT_RING(offsets[front]);
+ OUT_RING(sarea_priv->front_offset);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING(src_pitch);
- OUT_RING(offsets[back]);
+ OUT_RING(sarea_priv->back_offset);
ADVANCE_LP_RING();
}
}
}
- spin_unlock(&dev->drw_lock);
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
list_for_each_safe(hit, tmp, &hits) {
drm_i915_vbl_swap_t *swap_hit =
}
}
-u32 i915_get_vblank_counter(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long high_frame;
- unsigned long low_frame;
- u32 high1, high2, low, count;
- int pipe;
-
- pipe = i915_get_pipe(dev, plane);
- high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
- low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
-
- if (!i915_pipe_enabled(dev, pipe)) {
- printk(KERN_ERR "trying to get vblank count for disabled "
- "pipe %d\n", pipe);
- return 0;
- }
-
- /*
- * High & low register fields aren't synchronized, so make sure
- * we get a low value that's stable across two reads of the high
- * register.
- */
- do {
- high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
- PIPE_FRAME_LOW_SHIFT);
- high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- } while (high1 != high2);
-
- count = (high1 << 8) | low;
-
- /* count may be reset by other driver(e.g. 2D driver),
- we have no way to know if it is wrapped or resetted
- when count is zero. do a rough guess.
- */
- if (count == 0 && dev->last_vblank[pipe] < dev->max_vblank_count/2)
- dev->last_vblank[pipe] = 0;
-
- return count;
-}
-
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u16 temp;
u32 pipea_stats, pipeb_stats;
- int vblank = 0;
-
- iir = I915_READ(I915REG_INT_IDENTITY_R);
- if (iir == 0) {
- DRM_DEBUG ("iir 0x%08x im 0x%08x ie 0x%08x pipea 0x%08x pipeb 0x%08x\n",
- iir,
- I915_READ(I915REG_INT_MASK_R),
- I915_READ(I915REG_INT_ENABLE_R),
- I915_READ(I915REG_PIPEASTAT),
- I915_READ(I915REG_PIPEBSTAT));
- return IRQ_NONE;
- }
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
- pipea_stats = I915_READ(I915REG_PIPEASTAT);
- if (pipea_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
- I915_VBLANK_INTERRUPT_STATUS))
- {
- vblank++;
- drm_handle_vblank(dev, i915_get_plane(dev, 0));
- }
- I915_WRITE(I915REG_PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
- if (pipeb_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
- I915_VBLANK_INTERRUPT_STATUS))
- {
- vblank++;
- drm_handle_vblank(dev, i915_get_plane(dev, 1));
- }
- I915_WRITE(I915REG_PIPEBSTAT, pipeb_stats);
- }
+ pipea_stats = I915_READ(I915REG_PIPEASTAT);
+ pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
- I915_WRITE(I915REG_INT_IDENTITY_R, iir);
- (void) I915_READ(I915REG_INT_IDENTITY_R); /* Flush posted write */
+ temp &= (USER_INT_FLAG | VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG);
- if (iir & I915_USER_INTERRUPT) {
+ DRM_DEBUG("%s flag=%08x\n", __FUNCTION__, temp);
+
+ if (temp == 0)
+ return IRQ_NONE;
+
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+ (void) I915_READ16(I915REG_INT_IDENTITY_R);
+ DRM_READMEMORYBARRIER();
+
+ dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+
+ if (temp & USER_INT_FLAG)
DRM_WAKEUP(&dev_priv->irq_queue);
- }
- if (vblank) {
+
+ if (temp & (VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG)) {
+ int vblank_pipe = dev_priv->vblank_pipe;
+
+ if ((vblank_pipe &
+ (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B))
+ == (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B)) {
+ if (temp & VSYNC_PIPEA_FLAG)
+ atomic_inc(&dev->vbl_received);
+ if (temp & VSYNC_PIPEB_FLAG)
+ atomic_inc(&dev->vbl_received2);
+ } else if (((temp & VSYNC_PIPEA_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_A)) ||
+ ((temp & VSYNC_PIPEB_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_B)))
+ atomic_inc(&dev->vbl_received);
+
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
+
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
+ I915_WRITE(I915REG_PIPEASTAT,
+ pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
+ I915_WRITE(I915REG_PIPEBSTAT,
+ pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
}
return IRQ_HANDLED;
}
-static int i915_emit_irq(struct drm_device *dev)
+static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
+ dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return ret;
}
+static int i915_driver_vblank_do_wait(struct drm_device *dev, unsigned int *sequence,
+ atomic_t *counter)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(counter))
+ - *sequence) <= (1<<23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
+}
+
+
+int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received);
+}
+
+int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received2);
+}
+
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
return i915_wait_irq(dev, irqwait->irq_seq);
}
-int i915_enable_vblank(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int pipe = i915_get_pipe(dev, plane);
- u32 pipestat_reg = 0;
- u32 pipestat;
-
- switch (pipe) {
- case 0:
- pipestat_reg = I915REG_PIPEASTAT;
- dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = I915REG_PIPEBSTAT;
- dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- break;
- }
-
- if (pipestat_reg)
- {
- pipestat = I915_READ (pipestat_reg);
- /*
- * Older chips didn't have the start vblank interrupt,
- * but
- */
- if (IS_I965G (dev))
- pipestat |= I915_START_VBLANK_INTERRUPT_ENABLE;
- else
- pipestat |= I915_VBLANK_INTERRUPT_ENABLE;
- /*
- * Clear any pending status
- */
- pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
- I915_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- }
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
-
- return 0;
-}
-
-void i915_disable_vblank(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int pipe = i915_get_pipe(dev, plane);
- u32 pipestat_reg = 0;
- u32 pipestat;
-
- switch (pipe) {
- case 0:
- pipestat_reg = I915REG_PIPEASTAT;
- dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = I915REG_PIPEBSTAT;
- dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- break;
- }
-
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
- if (pipestat_reg)
- {
- pipestat = I915_READ (pipestat_reg);
- pipestat &= ~(I915_START_VBLANK_INTERRUPT_ENABLE |
- I915_VBLANK_INTERRUPT_ENABLE);
- /*
- * Clear any pending status
- */
- pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
- I915_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- }
-}
-
static void i915_enable_interrupt (struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u16 flag;
- dev_priv->irq_enable_reg |= I915_USER_INTERRUPT;
+ flag = 0;
+ if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)
+ flag |= VSYNC_PIPEA_FLAG;
+ if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)
+ flag |= VSYNC_PIPEB_FLAG;
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
- dev_priv->irq_enabled = 1;
+ I915_WRITE16(I915REG_INT_ENABLE_R, USER_INT_FLAG | flag);
}
/* Set the vblank monitor pipe
dev_priv->vblank_pipe = pipe->pipe;
+ i915_enable_interrupt (dev);
+
return 0;
}
flag = I915_READ(I915REG_INT_ENABLE_R);
pipe->pipe = 0;
- if (flag & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT)
+ if (flag & VSYNC_PIPEA_FLAG)
pipe->pipe |= DRM_I915_VBLANK_PIPE_A;
- if (flag & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+ if (flag & VSYNC_PIPEB_FLAG)
pipe->pipe |= DRM_I915_VBLANK_PIPE_B;
return 0;
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_swap_t *swap = data;
drm_i915_vbl_swap_t *vbl_swap;
- unsigned int pipe, seqtype, curseq, plane;
+ unsigned int pipe, seqtype, curseq;
unsigned long irqflags;
struct list_head *list;
- int ret;
if (!dev_priv) {
DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
- if (!dev_priv->sarea_priv || dev_priv->sarea_priv->rotation) {
+ if (dev_priv->sarea_priv->rotation) {
DRM_DEBUG("Rotation not supported\n");
return -EINVAL;
}
if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
- _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS |
- _DRM_VBLANK_FLIP)) {
+ _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
return -EINVAL;
}
- plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
- pipe = i915_get_pipe(dev, plane);
+ pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
spin_lock_irqsave(&dev->drw_lock, irqflags);
- /* It makes no sense to schedule a swap for a drawable that doesn't have
- * valid information at this point. E.g. this could mean that the X
- * server is too old to push drawable information to the DRM, in which
- * case all such swaps would become ineffective.
- */
if (!drm_get_drawable_info(dev, swap->drawable)) {
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- drm_update_vblank_count(dev, pipe);
- curseq = drm_vblank_count(dev, pipe);
+ curseq = atomic_read(pipe ? &dev->vbl_received2 : &dev->vbl_received);
if (seqtype == _DRM_VBLANK_RELATIVE)
swap->sequence += curseq;
}
}
- if (swap->seqtype & _DRM_VBLANK_FLIP) {
- swap->sequence--;
-
- if ((curseq - swap->sequence) <= (1<<23)) {
- struct drm_drawable_info *drw;
-
- LOCK_TEST_WITH_RETURN(dev, file_priv);
-
- spin_lock_irqsave(&dev->drw_lock, irqflags);
-
- drw = drm_get_drawable_info(dev, swap->drawable);
-
- if (!drw) {
- spin_unlock_irqrestore(&dev->drw_lock,
- irqflags);
- DRM_DEBUG("Invalid drawable ID %d\n",
- swap->drawable);
- return -EINVAL;
- }
-
- i915_dispatch_vsync_flip(dev, drw, plane);
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-
- return 0;
- }
- }
-
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
list_for_each(list, &dev_priv->vbl_swaps.head) {
vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head);
if (vbl_swap->drw_id == swap->drawable &&
- vbl_swap->plane == plane &&
+ vbl_swap->pipe == pipe &&
vbl_swap->sequence == swap->sequence) {
- vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
DRM_DEBUG("Already scheduled\n");
return 0;
DRM_DEBUG("\n");
- ret = drm_vblank_get(dev, pipe);
- if (ret) {
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- return ret;
- }
-
vbl_swap->drw_id = swap->drawable;
- vbl_swap->plane = plane;
+ vbl_swap->pipe = pipe;
vbl_swap->sequence = swap->sequence;
- vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
-
- if (vbl_swap->flip)
- swap->sequence++;
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- I915_WRITE16(I915REG_HWSTAM, 0xeffe);
+ I915_WRITE16(I915REG_HWSTAM, 0xfffe);
I915_WRITE16(I915REG_INT_MASK_R, 0x0);
I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
}
-int i915_driver_irq_postinstall(struct drm_device * dev)
+void i915_driver_irq_postinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
spin_lock_init(&dev_priv->swaps_lock);
INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
dev_priv->swaps_pending = 0;
- dev_priv->user_irq_refcount = 0;
- dev_priv->irq_enable_reg = 0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
-
- dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-
+ if (!dev_priv->vblank_pipe)
+ dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A;
i915_enable_interrupt(dev);
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
-
- /*
- * Initialize the hardware status page IRQ location.
- */
-
- I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21));
- return 0;
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
+ u16 temp;
if (!dev_priv)
return;
- dev_priv->irq_enabled = 0;
- I915_WRITE(I915REG_HWSTAM, 0xffffffff);
- I915_WRITE(I915REG_INT_MASK_R, 0xffffffff);
- I915_WRITE(I915REG_INT_ENABLE_R, 0x0);
-
- temp = I915_READ(I915REG_PIPEASTAT);
- I915_WRITE(I915REG_PIPEASTAT, temp);
- temp = I915_READ(I915REG_PIPEBSTAT);
- I915_WRITE(I915REG_PIPEBSTAT, temp);
- temp = I915_READ(I915REG_INT_IDENTITY_R);
- I915_WRITE(I915REG_INT_IDENTITY_R, temp);
+ I915_WRITE16(I915REG_HWSTAM, 0xffff);
+ I915_WRITE16(I915REG_INT_MASK_R, 0xffff);
+ I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
+
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
}
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA |
- DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL,
.dev_priv_size = sizeof(drm_mga_buf_priv_t),
.load = mga_driver_load,
.unload = mga_driver_unload,
.lastclose = mga_driver_lastclose,
.dma_quiescent = mga_driver_dma_quiescent,
.device_is_agp = mga_driver_device_is_agp,
- .get_vblank_counter = mga_get_vblank_counter,
- .enable_vblank = mga_enable_vblank,
- .disable_vblank = mga_disable_vblank,
+ .vblank_wait = mga_driver_vblank_wait,
.irq_preinstall = mga_driver_irq_preinstall,
.irq_postinstall = mga_driver_irq_postinstall,
.irq_uninstall = mga_driver_irq_uninstall,
u32 clear_cmd;
u32 maccess;
- atomic_t vbl_received; /**< Number of vblanks received. */
wait_queue_head_t fence_queue;
atomic_t last_fence_retired;
u32 next_fence_to_post;
extern int mga_warp_init(drm_mga_private_t * dev_priv);
/* mga_irq.c */
-extern int mga_enable_vblank(struct drm_device *dev, int crtc);
-extern void mga_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 mga_get_vblank_counter(struct drm_device *dev, int crtc);
extern int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence);
extern int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS);
extern void mga_driver_irq_preinstall(struct drm_device * dev);
-extern int mga_driver_irq_postinstall(struct drm_device * dev);
+extern void mga_driver_irq_postinstall(struct drm_device * dev);
extern void mga_driver_irq_uninstall(struct drm_device * dev);
extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
#include "mga_drm.h"
#include "mga_drv.h"
-u32 mga_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- const drm_mga_private_t *const dev_priv =
- (drm_mga_private_t *) dev->dev_private;
-
- if (crtc != 0) {
- return 0;
- }
-
-
- return atomic_read(&dev_priv->vbl_received);
-}
-
-
irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
/* VBLANK interrupt */
if (status & MGA_VLINEPEN) {
MGA_WRITE(MGA_ICLEAR, MGA_VLINEICLR);
- atomic_inc(&dev_priv->vbl_received);
- drm_handle_vblank(dev, 0);
+ atomic_inc(&dev->vbl_received);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
handled = 1;
}
return IRQ_NONE;
}
-int mga_enable_vblank(struct drm_device *dev, int crtc)
+int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
-
- if (crtc != 0) {
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- return 0;
- }
-
- MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
- return 0;
-}
+ unsigned int cur_vblank;
+ int ret = 0;
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received))
+ - *sequence) <= (1 << 23)));
-void mga_disable_vblank(struct drm_device *dev, int crtc)
-{
- if (crtc != 0) {
- DRM_ERROR("tried to disable vblank on non-existent crtc %d\n",
- crtc);
- }
+ *sequence = cur_vblank;
- /* Do *NOT* disable the vertical refresh interrupt. MGA doesn't have
- * a nice hardware counter that tracks the number of refreshes when
- * the interrupt is disabled, and the kernel doesn't know the refresh
- * rate to calculate an estimate.
- */
- /* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */
+ return ret;
}
int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence)
MGA_WRITE(MGA_ICLEAR, ~0);
}
-int mga_driver_irq_postinstall(struct drm_device * dev)
+void mga_driver_irq_postinstall(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
- /* Turn on soft trap interrupt. Vertical blank interrupts are enabled
- * in mga_enable_vblank.
- */
- MGA_WRITE(MGA_IEN, MGA_SOFTRAPEN);
- return 0;
+ /* Turn on vertical blank interrupt and soft trap interrupt. */
+ MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
}
void mga_driver_irq_uninstall(struct drm_device * dev)
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
- DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
- .get_vblank_counter = r128_get_vblank_counter,
- .enable_vblank = r128_enable_vblank,
- .disable_vblank = r128_disable_vblank,
+ .vblank_wait = r128_driver_vblank_wait,
.irq_preinstall = r128_driver_irq_preinstall,
.irq_postinstall = r128_driver_irq_postinstall,
.irq_uninstall = r128_driver_irq_uninstall,
u32 crtc_offset;
u32 crtc_offset_cntl;
- atomic_t vbl_received;
-
u32 color_fmt;
unsigned int front_offset;
unsigned int front_pitch;
extern int r128_do_cce_idle(drm_r128_private_t * dev_priv);
extern int r128_do_cleanup_cce(struct drm_device * dev);
-extern int r128_enable_vblank(struct drm_device *dev, int crtc);
-extern void r128_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 r128_get_vblank_counter(struct drm_device *dev, int crtc);
+extern int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
+
extern irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS);
extern void r128_driver_irq_preinstall(struct drm_device * dev);
-extern int r128_driver_irq_postinstall(struct drm_device * dev);
+extern void r128_driver_irq_postinstall(struct drm_device * dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
extern void r128_driver_preclose(struct drm_device * dev,
#include "r128_drm.h"
#include "r128_drv.h"
-u32 r128_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- const drm_r128_private_t *dev_priv = dev->dev_private;
-
- if (crtc != 0)
- return 0;
-
- return atomic_read(&dev_priv->vbl_received);
-}
-
irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
/* VBLANK interrupt */
if (status & R128_CRTC_VBLANK_INT) {
R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK);
- atomic_inc(&dev_priv->vbl_received);
- drm_handle_vblank(dev, 0);
+ atomic_inc(&dev->vbl_received);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
-int r128_enable_vblank(struct drm_device *dev, int crtc)
+int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_r128_private_t *dev_priv = dev->dev_private;
-
- if (crtc != 0) {
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
- return -EINVAL;
- }
+ unsigned int cur_vblank;
+ int ret = 0;
- R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN);
- return 0;
-}
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received))
+ - *sequence) <= (1 << 23)));
-void r128_disable_vblank(struct drm_device *dev, int crtc)
-{
- if (crtc != 0)
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
+ *sequence = cur_vblank;
- /*
- * FIXME: implement proper interrupt disable by using the vblank
- * counter register (if available)
- *
- * R128_WRITE(R128_GEN_INT_CNTL,
- * R128_READ(R128_GEN_INT_CNTL) & ~R128_CRTC_VBLANK_INT_EN);
- */
+ return ret;
}
void r128_driver_irq_preinstall(struct drm_device * dev)
R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK);
}
-int r128_driver_irq_postinstall(struct drm_device * dev)
+void r128_driver_irq_postinstall(struct drm_device * dev)
{
- return drm_vblank_init(dev, 1);
+ drm_r128_private_t *dev_priv = (drm_r128_private_t *) dev->dev_private;
+
+ /* Turn on VBL interrupt */
+ R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN);
}
void r128_driver_irq_uninstall(struct drm_device * dev)
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
- DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2,
.dev_priv_size = sizeof(drm_radeon_buf_priv_t),
.load = radeon_driver_load,
.firstopen = radeon_driver_firstopen,
.postclose = radeon_driver_postclose,
.lastclose = radeon_driver_lastclose,
.unload = radeon_driver_unload,
- .get_vblank_counter = radeon_get_vblank_counter,
- .enable_vblank = radeon_enable_vblank,
- .disable_vblank = radeon_disable_vblank,
+ .vblank_wait = radeon_driver_vblank_wait,
+ .vblank_wait2 = radeon_driver_vblank_wait2,
.dri_library_name = dri_library_name,
.irq_preinstall = radeon_driver_irq_preinstall,
.irq_postinstall = radeon_driver_irq_postinstall,
u32 scratch_ages[5];
- unsigned int crtc_last_cnt;
- unsigned int crtc2_last_cnt;
-
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
unsigned long fb_aper_offset;
extern int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv);
extern void radeon_do_release(struct drm_device * dev);
-extern u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc);
-extern int radeon_enable_vblank(struct drm_device *dev, int crtc);
-extern void radeon_disable_vblank(struct drm_device *dev, int crtc);
-extern void radeon_do_release(struct drm_device * dev);
+extern int radeon_driver_vblank_wait(struct drm_device * dev,
+ unsigned int *sequence);
+extern int radeon_driver_vblank_wait2(struct drm_device * dev,
+ unsigned int *sequence);
extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS);
extern void radeon_driver_irq_preinstall(struct drm_device * dev);
-extern int radeon_driver_irq_postinstall(struct drm_device * dev);
+extern void radeon_driver_irq_postinstall(struct drm_device * dev);
extern void radeon_driver_irq_uninstall(struct drm_device * dev);
extern int radeon_vblank_crtc_get(struct drm_device *dev);
extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
? DRM_READ32( dev_priv->ring_rptr, RADEON_SCRATCHOFF(x) ) \
: RADEON_READ( RADEON_SCRATCH_REG0 + 4*(x) ) )
-#define RADEON_CRTC_CRNT_FRAME 0x0214
-#define RADEON_CRTC2_CRNT_FRAME 0x0314
-
-#define RADEON_CRTC_STATUS 0x005c
-#define RADEON_CRTC2_STATUS 0x03fc
-
#define RADEON_GEN_INT_CNTL 0x0040
# define RADEON_CRTC_VBLANK_MASK (1 << 0)
# define RADEON_CRTC2_VBLANK_MASK (1 << 9)
#include "radeon_drm.h"
#include "radeon_drv.h"
-static void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
+static __inline__ u32 radeon_acknowledge_irqs(drm_radeon_private_t * dev_priv,
+ u32 mask)
{
- drm_radeon_private_t *dev_priv = dev->dev_private;
-
- if (state)
- dev_priv->irq_enable_reg |= mask;
- else
- dev_priv->irq_enable_reg &= ~mask;
-
- RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
-}
-
-int radeon_enable_vblank(struct drm_device *dev, int crtc)
-{
- switch (crtc) {
- case 0:
- radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 1);
- break;
- case 1:
- radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 1);
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- return EINVAL;
- }
-
- return 0;
-}
-
-void radeon_disable_vblank(struct drm_device *dev, int crtc)
-{
- switch (crtc) {
- case 0:
- radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 0);
- break;
- case 1:
- radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 0);
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- break;
- }
-}
-
-static __inline__ u32 radeon_acknowledge_irqs(drm_radeon_private_t * dev_priv)
-{
- u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS) &
- (RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
- RADEON_CRTC2_VBLANK_STAT);
-
+ u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS) & mask;
if (irqs)
RADEON_WRITE(RADEON_GEN_INT_STATUS, irqs);
-
return irqs;
}
/* Only consider the bits we're interested in - others could be used
* outside the DRM
*/
- stat = radeon_acknowledge_irqs(dev_priv);
+ stat = radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK |
+ RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT));
if (!stat)
return IRQ_NONE;
stat &= dev_priv->irq_enable_reg;
/* SW interrupt */
- if (stat & RADEON_SW_INT_TEST)
+ if (stat & RADEON_SW_INT_TEST) {
DRM_WAKEUP(&dev_priv->swi_queue);
+ }
/* VBLANK interrupt */
- if (stat & RADEON_CRTC_VBLANK_STAT)
- drm_handle_vblank(dev, 0);
- if (stat & RADEON_CRTC2_VBLANK_STAT)
- drm_handle_vblank(dev, 1);
+ if (stat & (RADEON_CRTC_VBLANK_STAT|RADEON_CRTC2_VBLANK_STAT)) {
+ int vblank_crtc = dev_priv->vblank_crtc;
+
+ if ((vblank_crtc &
+ (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) ==
+ (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) {
+ if (stat & RADEON_CRTC_VBLANK_STAT)
+ atomic_inc(&dev->vbl_received);
+ if (stat & RADEON_CRTC2_VBLANK_STAT)
+ atomic_inc(&dev->vbl_received2);
+ } else if (((stat & RADEON_CRTC_VBLANK_STAT) &&
+ (vblank_crtc & DRM_RADEON_VBLANK_CRTC1)) ||
+ ((stat & RADEON_CRTC2_VBLANK_STAT) &&
+ (vblank_crtc & DRM_RADEON_VBLANK_CRTC2)))
+ atomic_inc(&dev->vbl_received);
+
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
+ }
return IRQ_HANDLED;
}
return ret;
}
-u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc)
+static int radeon_driver_vblank_do_wait(struct drm_device * dev,
+ unsigned int *sequence, int crtc)
{
- drm_radeon_private_t *dev_priv = dev->dev_private;
- u32 crtc_cnt_reg, crtc_status_reg;
-
+ drm_radeon_private_t *dev_priv =
+ (drm_radeon_private_t *) dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
+ int ack = 0;
+ atomic_t *counter;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
- if (crtc == 0) {
- crtc_cnt_reg = RADEON_CRTC_CRNT_FRAME;
- crtc_status_reg = RADEON_CRTC_STATUS;
- } else if (crtc == 1) {
- crtc_cnt_reg = RADEON_CRTC2_CRNT_FRAME;
- crtc_status_reg = RADEON_CRTC2_STATUS;
- } else {
+ if (crtc == DRM_RADEON_VBLANK_CRTC1) {
+ counter = &dev->vbl_received;
+ ack |= RADEON_CRTC_VBLANK_STAT;
+ } else if (crtc == DRM_RADEON_VBLANK_CRTC2) {
+ counter = &dev->vbl_received2;
+ ack |= RADEON_CRTC2_VBLANK_STAT;
+ } else
return -EINVAL;
- }
- return RADEON_READ(crtc_cnt_reg) + (RADEON_READ(crtc_status_reg) & 1);
+ radeon_acknowledge_irqs(dev_priv, ack);
+
+ dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
+
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(counter))
+ - *sequence) <= (1 << 23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
+}
+
+int radeon_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence)
+{
+ return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC1);
+}
+
+int radeon_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence)
+{
+ return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC2);
}
/* Needs the lock as it touches the ring.
return radeon_wait_irq(dev, irqwait->irq_seq);
}
+static void radeon_enable_interrupt(struct drm_device *dev)
+{
+ drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
+
+ dev_priv->irq_enable_reg = RADEON_SW_INT_ENABLE;
+ if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC1)
+ dev_priv->irq_enable_reg |= RADEON_CRTC_VBLANK_MASK;
+
+ if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC2)
+ dev_priv->irq_enable_reg |= RADEON_CRTC2_VBLANK_MASK;
+
+ RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
+ dev_priv->irq_enabled = 1;
+}
+
/* drm_dma.h hooks
*/
void radeon_driver_irq_preinstall(struct drm_device * dev)
RADEON_WRITE(RADEON_GEN_INT_CNTL, 0);
/* Clear bits if they're already high */
- radeon_acknowledge_irqs(dev_priv);
+ radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK |
+ RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT));
}
-int radeon_driver_irq_postinstall(struct drm_device * dev)
+void radeon_driver_irq_postinstall(struct drm_device * dev)
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
- dev->max_vblank_count = 0x001fffff;
-
- radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
-
- return 0;
+ radeon_enable_interrupt(dev);
}
void radeon_driver_irq_uninstall(struct drm_device * dev)
return -EINVAL;
}
dev_priv->vblank_crtc = (unsigned int)value;
+ radeon_enable_interrupt(dev);
return 0;
}
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_IRQ |
- DRIVER_IRQ_SHARED,
+ DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL,
.load = via_driver_load,
.unload = via_driver_unload,
.context_dtor = via_final_context,
- .get_vblank_counter = via_get_vblank_counter,
- .enable_vblank = via_enable_vblank,
- .disable_vblank = via_disable_vblank,
+ .vblank_wait = via_driver_vblank_wait,
.irq_preinstall = via_driver_irq_preinstall,
.irq_postinstall = via_driver_irq_postinstall,
.irq_uninstall = via_driver_irq_uninstall,
struct timeval last_vblank;
int last_vblank_valid;
unsigned usec_per_vblank;
- atomic_t vbl_received;
drm_via_state_t hc_state;
char pci_buf[VIA_PCI_BUF_SIZE];
const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE];
extern int via_final_context(struct drm_device * dev, int context);
extern int via_do_cleanup_map(struct drm_device * dev);
-extern u32 via_get_vblank_counter(struct drm_device *dev, int crtc);
-extern int via_enable_vblank(struct drm_device *dev, int crtc);
-extern void via_disable_vblank(struct drm_device *dev, int crtc);
+extern int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
extern irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS);
extern void via_driver_irq_preinstall(struct drm_device * dev);
-extern int via_driver_irq_postinstall(struct drm_device * dev);
+extern void via_driver_irq_postinstall(struct drm_device * dev);
extern void via_driver_irq_uninstall(struct drm_device * dev);
extern int via_dma_cleanup(struct drm_device * dev);
static unsigned time_diff(struct timeval *now, struct timeval *then)
{
return (now->tv_usec >= then->tv_usec) ?
- now->tv_usec - then->tv_usec :
- 1000000 - (then->tv_usec - now->tv_usec);
-}
-
-u32 via_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- drm_via_private_t *dev_priv = dev->dev_private;
- if (crtc != 0)
- return 0;
-
- return atomic_read(&dev_priv->vbl_received);
+ now->tv_usec - then->tv_usec :
+ 1000000 - (then->tv_usec - now->tv_usec);
}
irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
status = VIA_READ(VIA_REG_INTERRUPT);
if (status & VIA_IRQ_VBLANK_PENDING) {
- atomic_inc(&dev_priv->vbl_received);
- if (!(atomic_read(&dev_priv->vbl_received) & 0x0F)) {
+ atomic_inc(&dev->vbl_received);
+ if (!(atomic_read(&dev->vbl_received) & 0x0F)) {
do_gettimeofday(&cur_vblank);
if (dev_priv->last_vblank_valid) {
dev_priv->usec_per_vblank =
dev_priv->last_vblank = cur_vblank;
dev_priv->last_vblank_valid = 1;
}
- if (!(atomic_read(&dev_priv->vbl_received) & 0xFF)) {
+ if (!(atomic_read(&dev->vbl_received) & 0xFF)) {
DRM_DEBUG("US per vblank is: %u\n",
dev_priv->usec_per_vblank);
}
- drm_handle_vblank(dev, 0);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
handled = 1;
}
}
}
-int via_enable_vblank(struct drm_device *dev, int crtc)
+int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_via_private_t *dev_priv = dev->dev_private;
- u32 status;
+ drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
- if (crtc != 0) {
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
+ DRM_DEBUG("\n");
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
- status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+ viadrv_acknowledge_irqs(dev_priv);
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
- return 0;
-}
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received)) -
+ *sequence) <= (1 << 23)));
-void via_disable_vblank(struct drm_device *dev, int crtc)
-{
- drm_via_private_t *dev_priv = dev->dev_private;
-
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
-
- if (crtc != 0)
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
+ *sequence = cur_vblank;
+ return ret;
}
static int
}
}
-int via_driver_irq_postinstall(struct drm_device * dev)
+void via_driver_irq_postinstall(struct drm_device * dev)
{
drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
u32 status;
- DRM_DEBUG("via_driver_irq_postinstall\n");
- if (!dev_priv)
- return -EINVAL;
+ DRM_DEBUG("\n");
+ if (dev_priv) {
+ status = VIA_READ(VIA_REG_INTERRUPT);
+ VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
+ | dev_priv->irq_enable_mask);
- drm_vblank_init(dev, 1);
- status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
- | dev_priv->irq_enable_mask);
+ /* Some magic, oh for some data sheets ! */
- /* Some magic, oh for some data sheets ! */
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
+ VIA_WRITE8(0x83d4, 0x11);
+ VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
- return 0;
+ }
}
void via_driver_irq_uninstall(struct drm_device * dev)
If unsure, say Y.
+config HW_RANDOM_VIRTIO
+ tristate "VirtIO Random Number Generator support"
+ depends on HW_RANDOM && VIRTIO
+ ---help---
+ This driver provides kernel-side support for the virtual Random Number
+ Generator hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
--- /dev/null
+/*
+ * Randomness driver for virtio
+ * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_rng.h>
+
+/* The host will fill any buffer we give it with sweet, sweet randomness. We
+ * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a
+ * time. */
+#define RANDOM_DATA_SIZE 64
+
+static struct virtqueue *vq;
+static u32 *random_data;
+static unsigned int data_left;
+static DECLARE_COMPLETION(have_data);
+
+static void random_recv_done(struct virtqueue *vq)
+{
+ int len;
+
+ /* We never get spurious callbacks. */
+ if (!vq->vq_ops->get_buf(vq, &len))
+ BUG();
+
+ data_left = len / sizeof(random_data[0]);
+ complete(&have_data);
+}
+
+static void register_buffer(void)
+{
+ struct scatterlist sg;
+
+ sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+ /* There should always be room for one buffer. */
+ if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
+/* At least we don't udelay() in a loop like some other drivers. */
+static int virtio_data_present(struct hwrng *rng, int wait)
+{
+ if (data_left)
+ return 1;
+
+ if (!wait)
+ return 0;
+
+ wait_for_completion(&have_data);
+ return 1;
+}
+
+/* virtio_data_present() must have succeeded before this is called. */
+static int virtio_data_read(struct hwrng *rng, u32 *data)
+{
+ BUG_ON(!data_left);
+
+ *data = random_data[--data_left];
+
+ if (!data_left) {
+ init_completion(&have_data);
+ register_buffer();
+ }
+ return sizeof(*data);
+}
+
+static struct hwrng virtio_hwrng = {
+ .name = "virtio",
+ .data_present = virtio_data_present,
+ .data_read = virtio_data_read,
+};
+
+static int virtrng_probe(struct virtio_device *vdev)
+{
+ int err;
+
+ /* We expect a single virtqueue. */
+ vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+ if (IS_ERR(vq))
+ return PTR_ERR(vq);
+
+ err = hwrng_register(&virtio_hwrng);
+ if (err) {
+ vdev->config->del_vq(vq);
+ return err;
+ }
+
+ register_buffer();
+ return 0;
+}
+
+static void virtrng_remove(struct virtio_device *vdev)
+{
+ vdev->config->reset(vdev);
+ hwrng_unregister(&virtio_hwrng);
+ vdev->config->del_vq(vq);
+}
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static struct virtio_driver virtio_rng = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtrng_probe,
+ .remove = __devexit_p(virtrng_remove),
+};
+
+static int __init init(void)
+{
+ int err;
+
+ random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL);
+ if (!random_data)
+ return -ENOMEM;
+
+ err = register_virtio_driver(&virtio_rng);
+ if (err)
+ kfree(random_data);
+ return err;
+}
+
+static void __exit fini(void)
+{
+ kfree(random_data);
+ unregister_virtio_driver(&virtio_rng);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio random number driver");
+MODULE_LICENSE("GPL");
# Makefile for the Computone IntelliPort Plus Driver
#
-obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
+obj-$(CONFIG_COMPUTONE) += ip2.o
-ip2-objs := ip2base.o
+ip2-objs := ip2base.o ip2main.o
return 0;
}
-/******************************************************************************/
-/* Function: init_module() */
-/* Parameters: None */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/* This is a required entry point for an installable module. It simply calls */
-/* the driver initialisation function and returns what it returns. */
-/******************************************************************************/
-#ifdef MODULE
-static int __init
-ip2_init_module(void)
-{
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "Loading module ...\n" );
-#endif
- return 0;
-}
-module_init(ip2_init_module);
-#endif /* MODULE */
-
/******************************************************************************/
/* Function: cleanup_module() */
/* Parameters: None */
return err;
}
-EXPORT_SYMBOL(ip2_loadmain);
-
/******************************************************************************/
/* Function: ip2_init_board() */
/* Parameters: Index of board in configuration structure */
int init_loops;
struct timer_list setup_timer;
+ /* Flag if hw is ready to send next packet */
int tx_ready;
- struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
- /* True if any packets are queued for transmission */
+ /* Count of pending packets to be sent */
int tx_queued;
+ struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
int rx_bytes_queued;
struct list_head rx_queue;
spin_lock_irqsave(&hw->spinlock, flags);
+ hw->tx_ready = 0;
+
if (hw->hw_version == HW_VERSION_1) {
outw((unsigned short) length, hw->base_port + IODWR);
spin_lock_irqsave(&hw->spinlock, flags);
list_add(&packet->queue, &hw->tx_queue[0]);
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
} else {
if (packet->packet_callback)
unsigned long flags;
spin_lock_irqsave(&hw->spinlock, flags);
- if (hw->tx_queued && hw->tx_ready != 0) {
+ if (hw->tx_queued && hw->tx_ready) {
int priority;
struct ipw_tx_packet *packet = NULL;
- hw->tx_ready--;
-
/* Pick a packet */
for (priority = 0; priority < priority_limit; priority++) {
if (!list_empty(&hw->tx_queue[priority])) {
struct ipw_tx_packet,
queue);
+ hw->tx_queued--;
list_del(&packet->queue);
break;
spin_unlock_irqrestore(&hw->spinlock, flags);
return 0;
}
+
spin_unlock_irqrestore(&hw->spinlock, flags);
/* Send */
if (irqn & IR_TXINTR) {
ack |= IR_TXINTR;
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
}
/* Received data */
if (memrxdone & MEMRX_RX_DONE) {
writew(0, &hw->memory_info_regs->memreg_rx_done);
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
tx = 1;
}
spin_lock_irqsave(&hw->spinlock, flags);
list_add_tail(&packet->queue, &hw->tx_queue[priority]);
- hw->tx_queued = 1;
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
flush_packets_to_hw(hw);
#include <linux/interrupt.h>
#include <linux/sched.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/sn/sn_sal.h>
#include <asm/unaligned.h>
#include "snsc.h"
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
NULL, /* x */
+ /* y: May be registered on sparc64 for global register dump */
NULL, /* y */
NULL /* z */
};
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
*
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
static struct tty_driver *scc_driver;
-struct scc_port scc_ports[2];
-
-int scc_initialized = 0;
+static struct scc_port scc_ports[2];
/*---------------------------------------------------------------------------
* Interface from generic_serial.c back here
vc->vc_blink, vc->vc_underline,
vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
- vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' ';
+ vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' ';
}
/* Note: inverting the screen twice should revert to the original state */
if (vc->vc_tty) {
struct winsize ws, *cws = &vc->vc_tty->winsize;
- unsigned long flags;
+ struct pid *pgrp = NULL;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
ws.ws_ypixel = vc->vc_scan_lines;
mutex_lock(&vc->vc_tty->termios_mutex);
- spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags);
- if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
- vc->vc_tty->pgrp)
+ spin_lock_irq(&vc->vc_tty->ctrl_lock);
+ if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
+ pgrp = get_pid(vc->vc_tty->pgrp);
+ spin_unlock_irq(&vc->vc_tty->ctrl_lock);
+ if (pgrp) {
kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
- spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags);
+ put_pid(pgrp);
+ }
*cws = ws;
mutex_unlock(&vc->vc_tty->termios_mutex);
}
int ret;
mutex_unlock(&cpufreq_governor_mutex);
- ret = request_module(name);
+ ret = request_module("%s", name);
mutex_lock(&cpufreq_governor_mutex);
if (ret == 0)
unsigned int freq = 0;
unsigned int ret;
- if (!policy->governor->store_setspeed)
+ if (!policy->governor || !policy->governor->store_setspeed)
return -EINVAL;
ret = sscanf(buf, "%u", &freq);
static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
{
- if (!policy->governor->show_setspeed)
+ if (!policy->governor || !policy->governor->show_setspeed)
return sprintf(buf, "<unsupported>\n");
return policy->governor->show_setspeed(policy, buf);
policy->user_policy.policy = policy->policy;
policy->user_policy.governor = policy->governor;
- unlock_policy_rwsem_write(cpu);
-
if (ret) {
dprintk("setting policy failed\n");
goto err_out_unregister;
}
+ unlock_policy_rwsem_write(cpu);
+
kobject_uevent(&policy->kobj, KOBJ_ADD);
module_put(cpufreq_driver->owner);
dprintk("initialization complete\n");
* linux/drivers/cpufreq/freq_table.c
*
* Copyright (C) 2002 - 2003 Dominik Brodowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
*/
#include <linux/kernel.h>
dev_dbg(device->common.dev, "%s\n", __func__);
- src = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ src = kmalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!src)
return -ENOMEM;
- dest = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ dest = kzalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!dest) {
kfree(src);
return -ENOMEM;
for (i = 0; i < IOP_ADMA_TEST_SIZE; i++)
((u8 *) src)[i] = (u8)i;
- memset(dest, 0, IOP_ADMA_TEST_SIZE);
-
/* Start copy, using first DMA channel */
dma_chan = container_of(device->common.channels.next,
struct dma_chan,
#include <linux/of_platform.h>
#include <linux/of_device.h>
-#include <asm/mpc85xx.h>
#include "edac_module.h"
#include "edac_core.h"
#include "mpc85xx_edac.h"
static u32 orig_l2_err_disable;
static u32 orig_hid1;
-static const char *mpc85xx_ctl_name = "MPC85xx";
-
/************************ MC SYSFS parts ***********************************/
static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci,
if (device == NULL)
return -ENODEV;
+ if (fw_device_is_shutdown(device)) {
+ fw_device_put(device);
+ return -ENODEV;
+ }
+
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (client == NULL) {
fw_device_put(device);
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, (void __user *) arg);
}
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, compat_ptr(arg));
}
#endif
unsigned long size;
int page_count, retval;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
/* FIXME: We could support multiple buffers, but we don't. */
if (client->buffer.pages != NULL)
return -EBUSY;
if (!edd_num_devices()) {
printk(KERN_INFO "EDD information not available.\n");
- return 1;
+ return -ENODEV;
}
edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
unsigned long flags;
int i;
- if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
+ if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1))
return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
unsigned id;
int base = chip->base;
- if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
+ if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1))
&& base >= 0) {
status = -EINVAL;
goto fail;
/* failures here can mean systems won't boot... */
if (status)
pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
- chip->base, chip->base + chip->ngpio,
+ chip->base, chip->base + chip->ngpio - 1,
chip->label ? : "generic");
return status;
}
{
struct mcp23s08 *mcp;
char bank;
- unsigned t;
+ int t;
unsigned mask;
mcp = container_of(chip, struct mcp23s08, chip);
{ "pca9537", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
+ { "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
/* REVISIT several pca955x parts should work here too */
/*
- * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $
- *
* (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
* (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
* (c) 2007 Jiri Kosina
/*
- * $Id: hid-input.c,v 1.2 2002/04/23 00:59:25 rdamazio Exp $
- *
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
*
}
}
- if (test_bit(usage->code, hid->pb_pressed_numlock) ||
- test_bit(LED_NUML, input->led)) {
+ if (hid->quirks & HID_QUIRK_APPLE_NUMLOCK_EMULATION && (
+ test_bit(usage->code, hid->pb_pressed_numlock) ||
+ test_bit(LED_NUML, input->led))) {
trans = find_translation(powerbook_numlock_keys, usage->code);
if (trans) {
#define USB_DEVICE_ID_MGE_UPS 0xffff
#define USB_DEVICE_ID_MGE_UPS1 0x0001
+#define USB_VENDOR_ID_MICROCHIP 0x04d8
+#define USB_DEVICE_ID_PICKIT1 0x0032
+#define USB_DEVICE_ID_PICKIT2 0x0033
+
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
#define USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0 0x009d
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
+#define USB_VENDOR_ID_SOUNDGRAPH 0x15c2
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038
+
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT2, HID_QUIRK_IGNORE },
+
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI, HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
/*
- * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Keyboard support
/*
- * $Id: usbmouse.c,v 1.15 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Mouse support
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
config SENSORS_IBMPEX
tristate "IBM PowerExecutive temperature/power sensors"
select IPMI_SI
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
+obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
void __iomem *amb_mmio;
struct i5k_device_attribute *attrs;
unsigned int num_attrs;
+ unsigned long chipset_id;
};
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
return res;
}
-static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
+static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data,
+ unsigned long devid)
{
struct pci_dev *pcidev;
u32 val32;
/* Find AMB register memory space */
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_5000_ERR,
+ devid,
NULL);
if (!pcidev)
return -ENODEV;
goto out;
}
+ data->chipset_id = devid;
+
res = 0;
out:
pci_dev_put(pcidev);
return res;
}
+static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
+ unsigned long channel)
+{
+ switch (data->chipset_id) {
+ case PCI_DEVICE_ID_INTEL_5000_ERR:
+ return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
+ case PCI_DEVICE_ID_INTEL_5400_ERR:
+ return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
+ default:
+ BUG();
+ }
+}
+
+static unsigned long chipset_ids[] = {
+ PCI_DEVICE_ID_INTEL_5000_ERR,
+ PCI_DEVICE_ID_INTEL_5400_ERR,
+ 0
+};
+
static int __devinit i5k_amb_probe(struct platform_device *pdev)
{
struct i5k_amb_data *data;
struct resource *reso;
+ int i;
int res = -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
return -ENOMEM;
/* Figure out where the AMB registers live */
- res = i5k_find_amb_registers(data);
+ i = 0;
+ do {
+ res = i5k_find_amb_registers(data, chipset_ids[i]);
+ i++;
+ } while (res && chipset_ids[i]);
+
if (res)
goto err;
/* Copy the DIMM presence map for the first two channels */
res = i5k_channel_probe(&data->amb_present[0],
- PCI_DEVICE_ID_INTEL_5000_FBD0);
+ i5k_channel_pci_id(data, 0));
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
i5k_channel_probe(&data->amb_present[2],
- PCI_DEVICE_ID_INTEL_5000_FBD1);
+ i5k_channel_pci_id(data, 1));
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
--- /dev/null
+/*
+ * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
+ * and capping functionality.
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ipmi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/math64.h>
+#include <linux/time.h>
+
+#define REFRESH_INTERVAL (HZ)
+#define IPMI_TIMEOUT (30 * HZ)
+#define DRVNAME "aem"
+
+#define AEM_NETFN 0x2E
+
+#define AEM_FIND_FW_CMD 0x80
+#define AEM_ELEMENT_CMD 0x81
+#define AEM_FW_INSTANCE_CMD 0x82
+
+#define AEM_READ_ELEMENT_CFG 0x80
+#define AEM_READ_BUFFER 0x81
+#define AEM_READ_REGISTER 0x82
+#define AEM_WRITE_REGISTER 0x83
+#define AEM_SET_REG_MASK 0x84
+#define AEM_CLEAR_REG_MASK 0x85
+#define AEM_READ_ELEMENT_CFG2 0x86
+
+#define AEM_CONTROL_ELEMENT 0
+#define AEM_ENERGY_ELEMENT 1
+#define AEM_CLOCK_ELEMENT 4
+#define AEM_POWER_CAP_ELEMENT 7
+#define AEM_EXHAUST_ELEMENT 9
+#define AEM_POWER_ELEMENT 10
+
+#define AEM_MODULE_TYPE_ID 0x0001
+
+#define AEM2_NUM_ENERGY_REGS 2
+#define AEM2_NUM_PCAP_REGS 6
+#define AEM2_NUM_TEMP_REGS 2
+#define AEM2_NUM_SENSORS 14
+
+#define AEM1_NUM_ENERGY_REGS 1
+#define AEM1_NUM_SENSORS 3
+
+/* AEM 2.x has more energy registers */
+#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS
+/* AEM 2.x needs more sensor files */
+#define AEM_NUM_SENSORS AEM2_NUM_SENSORS
+
+#define POWER_CAP 0
+#define POWER_CAP_MAX_HOTPLUG 1
+#define POWER_CAP_MAX 2
+#define POWER_CAP_MIN_WARNING 3
+#define POWER_CAP_MIN 4
+#define POWER_AUX 5
+
+#define AEM_DEFAULT_POWER_INTERVAL 1000
+#define AEM_MIN_POWER_INTERVAL 200
+#define UJ_PER_MJ 1000L
+
+static DEFINE_IDR(aem_idr);
+static DEFINE_SPINLOCK(aem_idr_lock);
+
+static struct device_driver aem_driver = {
+ .name = DRVNAME,
+ .bus = &platform_bus_type,
+};
+
+struct aem_ipmi_data {
+ struct completion read_complete;
+ struct ipmi_addr address;
+ ipmi_user_t user;
+ int interface;
+
+ struct kernel_ipmi_msg tx_message;
+ long tx_msgid;
+
+ void *rx_msg_data;
+ unsigned short rx_msg_len;
+ unsigned char rx_result;
+ int rx_recv_type;
+
+ struct device *bmc_device;
+};
+
+struct aem_ro_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ int index;
+};
+
+struct aem_rw_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ ssize_t (*set)(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count);
+ int index;
+};
+
+struct aem_data {
+ struct list_head list;
+
+ struct device *hwmon_dev;
+ struct platform_device *pdev;
+ struct mutex lock;
+ char valid;
+ unsigned long last_updated; /* In jiffies */
+ u8 ver_major;
+ u8 ver_minor;
+ u8 module_handle;
+ int id;
+ struct aem_ipmi_data ipmi;
+
+ /* Function to update sensors */
+ void (*update)(struct aem_data *data);
+
+ /*
+ * AEM 1.x sensors:
+ * Available sensors:
+ * Energy meter
+ * Power meter
+ *
+ * AEM 2.x sensors:
+ * Two energy meters
+ * Two power meters
+ * Two temperature sensors
+ * Six power cap registers
+ */
+
+ /* sysfs attrs */
+ struct sensor_device_attribute sensors[AEM_NUM_SENSORS];
+
+ /* energy use in mJ */
+ u64 energy[AEM_NUM_ENERGY_REGS];
+
+ /* power sampling interval in ms */
+ unsigned long power_period[AEM_NUM_ENERGY_REGS];
+
+ /* Everything past here is for AEM2 only */
+
+ /* power caps in dW */
+ u16 pcap[AEM2_NUM_PCAP_REGS];
+
+ /* exhaust temperature in C */
+ u8 temp[AEM2_NUM_TEMP_REGS];
+};
+
+/* Data structures returned by the AEM firmware */
+struct aem_iana_id {
+ u8 bytes[3];
+};
+static struct aem_iana_id system_x_id = {
+ .bytes = {0x4D, 0x4F, 0x00}
+};
+
+/* These are used to find AEM1 instances */
+struct aem_find_firmware_req {
+ struct aem_iana_id id;
+ u8 rsvd;
+ __be16 index;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_firmware_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+} __packed;
+
+/* These are used to find AEM2 instances */
+struct aem_find_instance_req {
+ struct aem_iana_id id;
+ u8 instance_number;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_instance_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+ u8 major;
+ u8 minor;
+ u8 module_handle;
+ u16 record_id;
+} __packed;
+
+/* These are used to query sensors */
+struct aem_read_sensor_req {
+ struct aem_iana_id id;
+ u8 module_handle;
+ u8 element;
+ u8 subcommand;
+ u8 reg;
+ u8 rx_buf_size;
+} __packed;
+
+struct aem_read_sensor_resp {
+ struct aem_iana_id id;
+ u8 bytes[0];
+} __packed;
+
+/* Data structures to talk to the IPMI layer */
+struct aem_driver_data {
+ struct list_head aem_devices;
+ struct ipmi_smi_watcher bmc_events;
+ struct ipmi_user_hndl ipmi_hndlrs;
+};
+
+static void aem_register_bmc(int iface, struct device *dev);
+static void aem_bmc_gone(int iface);
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+
+static void aem_remove_sensors(struct aem_data *data);
+static int aem_init_aem1(struct aem_ipmi_data *probe);
+static int aem_init_aem2(struct aem_ipmi_data *probe);
+static int aem1_find_sensors(struct aem_data *data);
+static int aem2_find_sensors(struct aem_data *data);
+static void update_aem1_sensors(struct aem_data *data);
+static void update_aem2_sensors(struct aem_data *data);
+
+static struct aem_driver_data driver_data = {
+ .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices),
+ .bmc_events = {
+ .owner = THIS_MODULE,
+ .new_smi = aem_register_bmc,
+ .smi_gone = aem_bmc_gone,
+ },
+ .ipmi_hndlrs = {
+ .ipmi_recv_hndl = aem_msg_handler,
+ },
+};
+
+/* Functions to talk to the IPMI layer */
+
+/* Initialize IPMI address, message buffers and user data */
+static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface,
+ struct device *bmc)
+{
+ int err;
+
+ init_completion(&data->read_complete);
+ data->bmc_device = bmc;
+
+ /* Initialize IPMI address */
+ data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ data->address.channel = IPMI_BMC_CHANNEL;
+ data->address.data[0] = 0;
+ data->interface = iface;
+
+ /* Initialize message buffers */
+ data->tx_msgid = 0;
+ data->tx_message.netfn = AEM_NETFN;
+
+ /* Create IPMI messaging interface user */
+ err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
+ data, &data->user);
+ if (err < 0) {
+ dev_err(bmc, "Unable to register user with IPMI "
+ "interface %d\n", data->interface);
+ return -EACCES;
+ }
+
+ return 0;
+}
+
+/* Send an IPMI command */
+static int aem_send_message(struct aem_ipmi_data *data)
+{
+ int err;
+
+ err = ipmi_validate_addr(&data->address, sizeof(data->address));
+ if (err)
+ goto out;
+
+ data->tx_msgid++;
+ err = ipmi_request_settime(data->user, &data->address, data->tx_msgid,
+ &data->tx_message, data, 0, 0, 0);
+ if (err)
+ goto out1;
+
+ return 0;
+out1:
+ dev_err(data->bmc_device, "request_settime=%x\n", err);
+ return err;
+out:
+ dev_err(data->bmc_device, "validate_addr=%x\n", err);
+ return err;
+}
+
+/* Dispatch IPMI messages to callers */
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+ unsigned short rx_len;
+ struct aem_ipmi_data *data = user_msg_data;
+
+ if (msg->msgid != data->tx_msgid) {
+ dev_err(data->bmc_device, "Mismatch between received msgid "
+ "(%02x) and transmitted msgid (%02x)!\n",
+ (int)msg->msgid,
+ (int)data->tx_msgid);
+ ipmi_free_recv_msg(msg);
+ return;
+ }
+
+ data->rx_recv_type = msg->recv_type;
+ if (msg->msg.data_len > 0)
+ data->rx_result = msg->msg.data[0];
+ else
+ data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE;
+
+ if (msg->msg.data_len > 1) {
+ rx_len = msg->msg.data_len - 1;
+ if (data->rx_msg_len < rx_len)
+ rx_len = data->rx_msg_len;
+ data->rx_msg_len = rx_len;
+ memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len);
+ } else
+ data->rx_msg_len = 0;
+
+ ipmi_free_recv_msg(msg);
+ complete(&data->read_complete);
+}
+
+/* ID functions */
+
+/* Obtain an id */
+static int aem_idr_get(int *id)
+{
+ int i, err;
+
+again:
+ if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL)))
+ return -ENOMEM;
+
+ spin_lock(&aem_idr_lock);
+ err = idr_get_new(&aem_idr, NULL, &i);
+ spin_unlock(&aem_idr_lock);
+
+ if (unlikely(err == -EAGAIN))
+ goto again;
+ else if (unlikely(err))
+ return err;
+
+ *id = i & MAX_ID_MASK;
+ return 0;
+}
+
+/* Release an object ID */
+static void aem_idr_put(int id)
+{
+ spin_lock(&aem_idr_lock);
+ idr_remove(&aem_idr, id);
+ spin_unlock(&aem_idr_lock);
+}
+
+/* Sensor support functions */
+
+/* Read a sensor value */
+static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
+ void *buf, size_t size)
+{
+ int rs_size, res;
+ struct aem_read_sensor_req rs_req;
+ struct aem_read_sensor_resp *rs_resp;
+ struct aem_ipmi_data *ipmi = &data->ipmi;
+
+ /* AEM registers are 1, 2, 4 or 8 bytes */
+ switch (size) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rs_req.id = system_x_id;
+ rs_req.module_handle = data->module_handle;
+ rs_req.element = elt;
+ rs_req.subcommand = AEM_READ_REGISTER;
+ rs_req.reg = reg;
+ rs_req.rx_buf_size = size;
+
+ ipmi->tx_message.cmd = AEM_ELEMENT_CMD;
+ ipmi->tx_message.data = (char *)&rs_req;
+ ipmi->tx_message.data_len = sizeof(rs_req);
+
+ rs_size = sizeof(*rs_resp) + size;
+ rs_resp = kzalloc(rs_size, GFP_KERNEL);
+ if (!rs_resp)
+ return -ENOMEM;
+
+ ipmi->rx_msg_data = rs_resp;
+ ipmi->rx_msg_len = rs_size;
+
+ aem_send_message(ipmi);
+
+ res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (ipmi->rx_result || ipmi->rx_msg_len != rs_size ||
+ memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) {
+ kfree(rs_resp);
+ return -ENOENT;
+ }
+
+ switch (size) {
+ case 1: {
+ u8 *x = buf;
+ *x = rs_resp->bytes[0];
+ break;
+ }
+ case 2: {
+ u16 *x = buf;
+ *x = be16_to_cpup((__be16 *)rs_resp->bytes);
+ break;
+ }
+ case 4: {
+ u32 *x = buf;
+ *x = be32_to_cpup((__be32 *)rs_resp->bytes);
+ break;
+ }
+ case 8: {
+ u64 *x = buf;
+ *x = be64_to_cpup((__be64 *)rs_resp->bytes);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* Update AEM energy registers */
+static void update_aem_energy(struct aem_data *data)
+{
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+ if (data->ver_major < 2)
+ return;
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+}
+
+/* Update all AEM1 sensors */
+static void update_aem1_sensors(struct aem_data *data)
+{
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Update all AEM2 sensors */
+static void update_aem2_sensors(struct aem_data *data)
+{
+ int i;
+
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1);
+
+ for (i = POWER_CAP; i <= POWER_AUX; i++)
+ aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i,
+ &data->pcap[i], 2);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Delete an AEM instance */
+static void aem_delete(struct aem_data *data)
+{
+ list_del(&data->list);
+ aem_remove_sensors(data);
+ hwmon_device_unregister(data->hwmon_dev);
+ ipmi_destroy_user(data->ipmi.user);
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+ aem_idr_put(data->id);
+ kfree(data);
+}
+
+/* Probe functions for AEM1 devices */
+
+/* Retrieve version and module handle for an AEM1 instance */
+static int aem_find_aem1_count(struct aem_ipmi_data *data)
+{
+ int res;
+ struct aem_find_firmware_req ff_req;
+ struct aem_find_firmware_resp ff_resp;
+
+ ff_req.id = system_x_id;
+ ff_req.index = 0;
+ ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FIND_FW_CMD;
+ data->tx_message.data = (char *)&ff_req;
+ data->tx_message.data_len = sizeof(ff_req);
+
+ data->rx_msg_data = &ff_resp;
+ data->rx_msg_len = sizeof(ff_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) ||
+ memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return ff_resp.num_instances;
+}
+
+/* Find and initialize one AEM1 instance */
+static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = 1;
+ data->ver_minor = 0;
+ data->module_handle = module_handle;
+ for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem1_sensors;
+
+ /* Find sensors */
+ if (aem1_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM1 instances */
+static int aem_init_aem1(struct aem_ipmi_data *probe)
+{
+ int num, i, err;
+
+ num = aem_find_aem1_count(probe);
+ for (i = 0; i < num; i++) {
+ err = aem_init_aem1_inst(probe, i);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM1 0x%X\n",
+ err, i);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* Probe functions for AEM2 devices */
+
+/* Retrieve version and module handle for an AEM2 instance */
+static int aem_find_aem2(struct aem_ipmi_data *data,
+ struct aem_find_instance_resp *fi_resp,
+ int instance_num)
+{
+ int res;
+ struct aem_find_instance_req fi_req;
+
+ fi_req.id = system_x_id;
+ fi_req.instance_number = instance_num;
+ fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FW_INSTANCE_CMD;
+ data->tx_message.data = (char *)&fi_req;
+ data->tx_message.data_len = sizeof(fi_req);
+
+ data->rx_msg_data = fi_resp;
+ data->rx_msg_len = sizeof(*fi_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
+ memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return 0;
+}
+
+/* Find and initialize one AEM2 instance */
+static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
+ struct aem_find_instance_resp *fi_resp)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = fi_resp->major;
+ data->ver_minor = fi_resp->minor;
+ data->module_handle = fi_resp->module_handle;
+ for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem2_sensors;
+
+ /* Find sensors */
+ if (aem2_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM2 instances */
+static int aem_init_aem2(struct aem_ipmi_data *probe)
+{
+ struct aem_find_instance_resp fi_resp;
+ int err;
+ int i = 0;
+
+ while (!aem_find_aem2(probe, &fi_resp, i)) {
+ if (fi_resp.major != 2) {
+ dev_err(probe->bmc_device, "Unknown AEM v%d; please "
+ "report this to the maintainer.\n",
+ fi_resp.major);
+ i++;
+ continue;
+ }
+ err = aem_init_aem2_inst(probe, &fi_resp);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM2 0x%X\n",
+ err, fi_resp.module_handle);
+ return err;
+ }
+ i++;
+ }
+
+ return 0;
+}
+
+/* Probe a BMC for AEM firmware instances */
+static void aem_register_bmc(int iface, struct device *dev)
+{
+ struct aem_ipmi_data probe;
+
+ if (aem_init_ipmi_data(&probe, iface, dev))
+ return;
+
+ /* Ignore probe errors; they won't cause problems */
+ aem_init_aem1(&probe);
+ aem_init_aem2(&probe);
+
+ ipmi_destroy_user(probe.user);
+}
+
+/* Handle BMC deletion */
+static void aem_bmc_gone(int iface)
+{
+ struct aem_data *p1, *next1;
+
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ if (p1->ipmi.interface == iface)
+ aem_delete(p1);
+}
+
+/* sysfs support functions */
+
+/* AEM device name */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major);
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+/* AEM device version */
+static ssize_t show_version(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor);
+}
+static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0);
+
+/* Display power use */
+static ssize_t aem_show_power(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *data = dev_get_drvdata(dev);
+ u64 before, after, delta, time;
+ signed long leftover;
+ struct timespec b, a;
+
+ mutex_lock(&data->lock);
+ update_aem_energy(data);
+ getnstimeofday(&b);
+ before = data->energy[attr->index];
+
+ leftover = schedule_timeout_interruptible(
+ msecs_to_jiffies(data->power_period[attr->index])
+ );
+ if (leftover) {
+ mutex_unlock(&data->lock);
+ return 0;
+ }
+
+ update_aem_energy(data);
+ getnstimeofday(&a);
+ after = data->energy[attr->index];
+ mutex_unlock(&data->lock);
+
+ time = timespec_to_ns(&a) - timespec_to_ns(&b);
+ delta = (after - before) * UJ_PER_MJ;
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time));
+}
+
+/* Display energy use */
+static ssize_t aem_show_energy(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)a->energy[attr->index] * 1000);
+}
+
+/* Display power interval registers */
+static ssize_t aem_show_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%lu\n", a->power_period[attr->index]);
+}
+
+/* Set power interval registers */
+static ssize_t aem_set_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ unsigned long temp;
+ int res;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ if (temp < AEM_MIN_POWER_INTERVAL)
+ return -EINVAL;
+
+ mutex_lock(&a->lock);
+ a->power_period[attr->index] = temp;
+ mutex_unlock(&a->lock);
+
+ return count;
+}
+
+/* Discover sensors on an AEM device */
+static int aem_register_sensors(struct aem_data *data,
+ struct aem_ro_sensor_template *ro,
+ struct aem_rw_sensor_template *rw)
+{
+ struct device *dev = &data->pdev->dev;
+ struct sensor_device_attribute *sensors = data->sensors;
+ int err;
+
+ /* Set up read-only sensors */
+ while (ro->label) {
+ sensors->dev_attr.attr.name = ro->label;
+ sensors->dev_attr.attr.mode = S_IRUGO;
+ sensors->dev_attr.show = ro->show;
+ sensors->index = ro->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ ro++;
+ }
+
+ /* Set up read-write sensors */
+ while (rw->label) {
+ sensors->dev_attr.attr.name = rw->label;
+ sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
+ sensors->dev_attr.show = rw->show;
+ sensors->dev_attr.store = rw->set;
+ sensors->index = rw->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ rw++;
+ }
+
+ err = device_create_file(dev, &sensor_dev_attr_name.dev_attr);
+ if (err)
+ goto error;
+ err = device_create_file(dev, &sensor_dev_attr_version.dev_attr);
+ return err;
+
+error:
+ aem_remove_sensors(data);
+ return err;
+}
+
+/* sysfs support functions for AEM2 sensors */
+
+/* Display temperature use */
+static ssize_t aem2_show_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->temp[attr->index] * 1000);
+}
+
+/* Display power-capping registers */
+static ssize_t aem2_show_pcap_value(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000);
+}
+
+/* Remove sensors attached to an AEM device */
+static void aem_remove_sensors(struct aem_data *data)
+{
+ int i;
+
+ for (i = 0; i < AEM_NUM_SENSORS; i++) {
+ if (!data->sensors[i].dev_attr.attr.name)
+ continue;
+ device_remove_file(&data->pdev->dev,
+ &data->sensors[i].dev_attr);
+ }
+
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_name.dev_attr);
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_version.dev_attr);
+}
+
+/* Sensor probe functions */
+
+/* Description of AEM1 sensors */
+static struct aem_ro_sensor_template aem1_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"power1_average", aem_show_power, 0},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem1_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{NULL, NULL, NULL, 0},
+};
+
+/* Description of AEM2 sensors */
+static struct aem_ro_sensor_template aem2_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"energy2_input", aem_show_energy, 1},
+{"power1_average", aem_show_power, 0},
+{"power2_average", aem_show_power, 1},
+{"temp1_input", aem2_show_temp, 0},
+{"temp2_input", aem2_show_temp, 1},
+
+{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG},
+{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX},
+{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING},
+{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN},
+
+{"power3_average", aem2_show_pcap_value, POWER_AUX},
+{"power_cap", aem2_show_pcap_value, POWER_CAP},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem2_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1},
+{NULL, NULL, NULL, 0},
+};
+
+/* Set up AEM1 sensor attrs */
+static int aem1_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors);
+}
+
+/* Set up AEM2 sensor attrs */
+static int aem2_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors);
+}
+
+/* Module init/exit routines */
+
+static int __init aem_init(void)
+{
+ int res;
+
+ res = driver_register(&aem_driver);
+ if (res) {
+ printk(KERN_ERR "Can't register aem driver\n");
+ return res;
+ }
+
+ res = ipmi_smi_watcher_register(&driver_data.bmc_events);
+ if (res)
+ goto ipmi_reg_err;
+ return 0;
+
+ipmi_reg_err:
+ driver_unregister(&aem_driver);
+ return res;
+
+}
+
+static void __exit aem_exit(void)
+{
+ struct aem_data *p1, *next1;
+
+ ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+ driver_unregister(&aem_driver);
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ aem_delete(p1);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(aem_init);
+module_exit(aem_exit);
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+ I2C_FUNC_SMBUS_BLOCK_DATA;
}
static const struct i2c_algorithm smbus_algorithm = {
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
/* Misc definitions */
#define MAX_TIMEOUT 100
+/* We disable the second SMBus channel on these boards */
+static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = {
+ {
+ .ident = "DFI Lanparty NF4 Expert",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "DFI Corp,LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "LP UT NF4 Expert"),
+ },
+ },
+ { }
+};
+
static struct pci_driver nforce2_driver;
static void nforce2_abort(struct i2c_adapter *adap)
smbuses[0].base = 0; /* to have a check value */
}
/* SMBus adapter 2 */
- res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
- if (res2 < 0) {
- dev_err(&dev->dev, "Error probing SMB2.\n");
- smbuses[1].base = 0; /* to have a check value */
+ if (dmi_check_system(nforce2_dmi_blacklist2)) {
+ dev_err(&dev->dev, "Disabling SMB2 for safety reasons.\n");
+ res2 = -EPERM;
+ smbuses[1].base = 0;
+ } else {
+ res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1],
+ "SMB2");
+ if (res2 < 0) {
+ dev_err(&dev->dev, "Error probing SMB2.\n");
+ smbuses[1].base = 0; /* to have a check value */
+ }
}
if ((res1 < 0) && (res2 < 0)) {
/* we did not find even one of the SMBuses, so we give up */
fake_client->flags = 0;
strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE);
- /* Prevent 24RF08 corruption (in case of user error) */
- i2c_smbus_write_quick(real_client, 0);
-
if ((err = i2c_attach_client(real_client)) != 0)
goto exit_kfree2;
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
- /* new style drivers use the same kind of driver matching policy
- * as platform devices or SPI: compare device and driver IDs.
- */
- return strcmp(client->driver_name, drv->name) == 0;
+ return 0;
}
#ifdef CONFIG_HOTPLUG
if (dev->driver)
return 0;
- if (client->driver_name[0]) {
- if (add_uevent_var(env, "MODALIAS=%s", client->driver_name))
- return -ENOMEM;
- } else {
- if (add_uevent_var(env, "MODALIAS=%s%s",
- I2C_MODULE_PREFIX, client->name))
- return -ENOMEM;
- }
+ if (add_uevent_var(env, "MODALIAS=%s%s",
+ I2C_MODULE_PREFIX, client->name))
+ return -ENOMEM;
dev_dbg(dev, "uevent\n");
return 0;
}
static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
- return client->driver_name[0]
- ? sprintf(buf, "%s\n", client->driver_name)
- : sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
+ return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
static struct device_attribute i2c_dev_attrs[] = {
client->addr = info->addr;
client->irq = info->irq;
- strlcpy(client->driver_name, info->driver_name,
- sizeof(client->driver_name));
strlcpy(client->name, info->type, sizeof(client->name));
/* a new style driver may be bound to this device when we
get_device(&hwif->gendev);
- hwif->portdev = device_create(ide_port_class, &hwif->gendev,
- MKDEV(0, 0), hwif->name);
+ hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
+ MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
ret = PTR_ERR(hwif->portdev);
device_unregister(&hwif->gendev);
}
- dev_set_drvdata(hwif->portdev, hwif);
out:
return ret;
}
int irq;
hw_regs_t hw;
+ if (!MACH_IS_MAC)
+ return -ENODEV;
+
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
base = IDE_BASE;
static void sbp2_create_command_orb(struct sbp2_lu *lu,
struct sbp2_command_info *cmd,
- unchar *scsi_cmd,
- unsigned int scsi_use_sg,
- unsigned int scsi_request_bufflen,
- struct scatterlist *sg,
- enum dma_data_direction dma_dir)
+ struct scsi_cmnd *SCpnt)
{
struct sbp2_fwhost_info *hi = lu->hi;
struct sbp2_command_orb *orb = &cmd->command_orb;
u32 orb_direction;
+ unsigned int scsi_request_bufflen = scsi_bufflen(SCpnt);
+ enum dma_data_direction dma_dir = SCpnt->sc_data_direction;
/*
* Set-up our command ORB.
orb->data_descriptor_lo = 0x0;
orb->misc |= ORB_SET_DIRECTION(1);
} else
- sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sg,
+ sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_sg_count(SCpnt),
+ scsi_sglist(SCpnt),
orb_direction, dma_dir);
sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
- memset(orb->cdb, 0, 12);
- memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
+ memset(orb->cdb, 0, sizeof(orb->cdb));
+ memcpy(orb->cdb, SCpnt->cmnd, SCpnt->cmd_len);
}
static void sbp2_link_orb_command(struct sbp2_lu *lu,
static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
struct sbp2_command_info *cmd;
cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
if (!cmd)
return -EIO;
- sbp2_create_command_orb(lu, cmd, scsi_cmd, scsi_sg_count(SCpnt),
- scsi_bufflen(SCpnt), scsi_sglist(SCpnt),
- SCpnt->sc_data_direction);
+ sbp2_create_command_orb(lu, cmd, SCpnt);
sbp2_link_orb_command(lu, cmd);
return 0;
break;
case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED:
kmem_cache_free(ib_mad_cache, mad_priv);
- break;
+ kfree(local);
+ ret = 1;
+ goto out;
case IB_MAD_RESULT_SUCCESS:
/* Treat like an incoming receive MAD */
port_priv = ib_get_mad_port(mad_agent_priv->agent.device,
ret = 0;
while (npages) {
ret = get_user_pages(current, current->mm, cur_base,
- min_t(int, npages,
+ min_t(unsigned long, npages,
PAGE_SIZE / sizeof (struct page *)),
1, !umem->writable, page_list, vma_list);
if (cdev_add(port->cdev, base_dev + port->dev_num, 1))
goto err_cdev;
- port->dev = device_create(umad_class, device->dma_device,
- port->cdev->dev, "umad%d", port->dev_num);
+ port->dev = device_create_drvdata(umad_class, device->dma_device,
+ port->cdev->dev, port,
+ "umad%d", port->dev_num);
if (IS_ERR(port->dev))
goto err_cdev;
if (cdev_add(port->sm_cdev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1))
goto err_sm_cdev;
- port->sm_dev = device_create(umad_class, device->dma_device,
- port->sm_cdev->dev,
- "issm%d", port->dev_num);
+ port->sm_dev = device_create_drvdata(umad_class, device->dma_device,
+ port->sm_cdev->dev, port,
+ "issm%d", port->dev_num);
if (IS_ERR(port->sm_dev))
goto err_sm_cdev;
- dev_set_drvdata(port->dev, port);
- dev_set_drvdata(port->sm_dev, port);
-
if (device_create_file(port->sm_dev, &dev_attr_ibdev))
goto err_sm_dev;
if (device_create_file(port->sm_dev, &dev_attr_port))
if (cdev_add(uverbs_dev->cdev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1))
goto err_cdev;
- uverbs_dev->dev = device_create(uverbs_class, device->dma_device,
- uverbs_dev->cdev->dev,
- "uverbs%d", uverbs_dev->devnum);
+ uverbs_dev->dev = device_create_drvdata(uverbs_class,
+ device->dma_device,
+ uverbs_dev->cdev->dev,
+ uverbs_dev,
+ "uverbs%d",
+ uverbs_dev->devnum);
if (IS_ERR(uverbs_dev->dev))
goto err_cdev;
- dev_set_drvdata(uverbs_dev->dev, uverbs_dev);
-
if (device_create_file(uverbs_dev->dev, &dev_attr_ibdev))
goto err_class;
if (device_create_file(uverbs_dev->dev, &dev_attr_abi_version))
IB_DEVICE_CURR_QP_STATE_MOD |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_ZERO_STAG |
- IB_DEVICE_MEM_WINDOW |
- IB_DEVICE_SEND_W_INV);
+ IB_DEVICE_MEM_WINDOW);
/* Allocate the qptr_array */
c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
struct ib_send_wr **bad_wr)
{
int err = 0;
- u8 t3_wr_flit_cnt;
+ u8 uninitialized_var(t3_wr_flit_cnt);
enum t3_wr_opcode t3_wr_opcode = 0;
enum t3_wr_flags t3_wr_flags;
struct iwch_qp *qhp;
int ret = 0;
unsigned long flags;
- if (unlikely(my_qp->state != IB_QPS_RTS)) {
- ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num);
+ /* Reject WR if QP is in RESET, INIT or RTR state */
+ if (unlikely(my_qp->state < IB_QPS_RTS)) {
+ ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x",
+ my_qp->state, qp->qp_num);
return -EINVAL;
}
#define IPATH_SDMA_TXREQ_S_ABORTED 2
#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
+#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
+#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
+#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
+#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
+
/* max dwords in small buffer packet */
#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
goto bail;
}
+ case IB_MGMT_METHOD_TRAP:
+ case IB_MGMT_METHOD_REPORT:
+ case IB_MGMT_METHOD_REPORT_RESP:
+ case IB_MGMT_METHOD_TRAP_REPRESS:
case IB_MGMT_METHOD_GET_RESP:
/*
* The ib_mad module will call us to process responses
hwstatus = ipath_read_kreg64(dd,
dd->ipath_kregs->kr_senddmastatus);
- if (/* ScoreBoardDrainInProg */
- test_bit(63, &hwstatus) ||
- /* AbortInProg */
- test_bit(62, &hwstatus) ||
- /* InternalSDmaEnable */
- test_bit(61, &hwstatus) ||
- /* ScbEmpty */
- !test_bit(30, &hwstatus)) {
+ if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
+ IPATH_SDMA_STATUS_ABORT_IN_PROG |
+ IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
+ !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
if (dd->ipath_sdma_reset_wait > 0) {
/* not done shutting down sdma */
--dd->ipath_sdma_reset_wait;
* state change
*/
if (jiffies > dd->ipath_sdma_abort_jiffies) {
- ipath_dbg("looping with status 0x%016llx\n",
+ ipath_dbg("looping with status 0x%08lx\n",
dd->ipath_sdma_status);
dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
}
}
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
if (!needed) {
- ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n",
+ ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
dd->ipath_sdma_status);
goto bail;
}
dev->n_pkt_drops++;
goto done;
}
- /* XXX Need to free SGEs */
+ wc.opcode = IB_WC_RECV;
last_imm:
ipath_copy_sge(&qp->r_sge, data, tlen);
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.slid = qp->remote_ah_attr.dlid;
goto done;
}
wc.byte_len = qp->r_len;
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
goto last_imm;
case OP(RDMA_WRITE_LAST):
props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
- IB_DEVICE_SYS_IMAGE_GUID;
+ IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
+ IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
props->page_size_cap = PAGE_SIZE;
props->vendor_id = dev->dd->ipath_vendorid;
props->vendor_part_id = dev->dd->ipath_deviceid;
cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
send_wqe_overhead(type, qp->flags);
+ if (s > dev->dev->caps.max_sq_desc_sz)
+ return -EINVAL;
+
/*
* Hermon supports shrinking WQEs, such that a single work
* request can include multiple units of 1 << wqe_shift. This
qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s));
for (;;) {
- if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz)
- return -EINVAL;
-
qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift);
/*
++qp->sq.wqe_shift;
}
- qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
+ qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz,
+ (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) -
send_wqe_overhead(type, qp->flags)) /
sizeof (struct mlx4_wqe_data_seg);
cap->max_send_wr = qp->sq.max_post =
(qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr;
- cap->max_send_sge = qp->sq.max_gs;
+ cap->max_send_sge = min(qp->sq.max_gs,
+ min(dev->dev->caps.max_sq_sg,
+ dev->dev->caps.max_rq_sg));
/* We don't support inline sends for kernel QPs (yet) */
cap->max_inline_data = 0;
unsigned ind;
int uninitialized_var(stamp);
int uninitialized_var(size);
- unsigned seglen;
+ unsigned uninitialized_var(seglen);
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
#include "mthca_cmd.h"
#include "mthca_profile.h"
#include "mthca_memfree.h"
+#include "mthca_wqe.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
mdev->limits.gid_table_len = dev_lim->max_gids;
mdev->limits.pkey_table_len = dev_lim->max_pkeys;
mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
- mdev->limits.max_sg = dev_lim->max_sg;
+ /*
+ * Need to allow for worst case send WQE overhead and check
+ * whether max_desc_sz imposes a lower limit than max_sg; UD
+ * send has the biggest overhead.
+ */
+ mdev->limits.max_sg = min_t(int, dev_lim->max_sg,
+ (dev_lim->max_desc_sz -
+ sizeof (struct mthca_next_seg) -
+ (mthca_is_memfree(mdev) ?
+ sizeof (struct mthca_arbel_ud_seg) :
+ sizeof (struct mthca_tavor_ud_seg))) /
+ sizeof (struct mthca_data_seg));
mdev->limits.max_wqes = dev_lim->max_qp_sz;
mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp;
mdev->limits.reserved_qps = dev_lim->reserved_qps;
/* Set the cached Q_Key before we attach if it's the broadcast group */
if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid))) {
+ spin_lock_irq(&priv->lock);
+ if (!priv->broadcast) {
+ spin_unlock_irq(&priv->lock);
+ return -EAGAIN;
+ }
priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
+ spin_unlock_irq(&priv->lock);
priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
}
MODULE_AUTHOR("Nicolas Bellido Y Ortega");
MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
static void atkbd_cleanup(struct serio *serio)
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
}
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Corgi Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:corgi-keyboard");
return -ENOMEM;
#if defined(CONFIG_HP300)
+ if (!MACH_IS_HP300) {
+ err = -ENODEV;
+ goto err1;
+ }
if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
printk(KERN_ERR "HIL: hardware register was not found\n");
err = -ENODEV;
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:jornada680_kbd");
MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
static unsigned short jornada_std_keymap[128] = { /* ROW */
0, KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, /* #1 */
set_bit(code, input_dev->keybit);
}
+ for (i = 0; i < pdata->direct_key_num; i++)
+ set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
keypad->rotary_up_key[0] = pdata->rotary0_up_key;
keypad->rotary_up_key[1] = pdata->rotary1_up_key;
keypad->rotary_down_key[0] = pdata->rotary0_down_key;
keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
- if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
- set_bit(pdata->rotary0_up_key, input_dev->keybit);
- set_bit(pdata->rotary0_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary0_rel_code, input_dev->relbit);
-
- if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
- set_bit(pdata->rotary1_up_key, input_dev->keybit);
- set_bit(pdata->rotary1_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary0) {
+ if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+ set_bit(pdata->rotary0_up_key, input_dev->keybit);
+ set_bit(pdata->rotary0_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ }
+
+ if (pdata->enable_rotary1) {
+ if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+ set_bit(pdata->rotary1_up_key, input_dev->keybit);
+ set_bit(pdata->rotary1_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ }
}
static inline unsigned int lookup_matrix_keycode(
keypad->input_dev = input_dev;
input_set_drvdata(input_dev, keypad);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
- BIT_MASK(EV_REL);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ if ((keypad->pdata->enable_rotary0 &&
+ keypad->pdata->rotary0_rel_code) ||
+ (keypad->pdata->enable_rotary1 &&
+ keypad->pdata->rotary1_rel_code)) {
+ input_dev->evbit[0] |= BIT_MASK(EV_REL);
+ }
pxa27x_keypad_build_keycode(keypad);
platform_set_drvdata(pdev, keypad);
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Spitz Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spitz-keyboard");
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/input-polldev.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
{
int ret;
+#ifdef __mc68000__
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+#endif
+
init_MUTEX(&i8042tregs);
if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr)))
{
hil_mlc *mlc = &hp_sdc_mlc;
+#ifdef __mc68000__
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+#endif
+
printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
hp_sdc_mlc_priv.emtestmode = 0;
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 9110"),
},
},
+ {
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
{
.ident = "Acer TravelMate 2490",
.matches = {
#undef DELAY
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+ char param = 0x90;
+ int error;
+
+ error = i8042_command(¶m, 0x1059);
+ if (error)
+ printk(KERN_WARNING
+ "Failed to enable DRITEK extension: %d\n",
+ error);
+}
+#endif
+
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
return -EIO;
}
+
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
if (error)
return error;
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
if (error)
goto out_fail;
}
-#ifdef CONFIG_X86
- if (i8042_dritek) {
- char param = 0x90;
- error = i8042_command(¶m, 0x1059);
- if (error)
- goto out_fail;
- }
-#endif
/*
* Ok, everything is ready, let's register all serio ports
*/
int error;
if (!MACH_IS_Q40)
- return -EIO;
+ return -ENODEV;
error = platform_driver_register(&q40kbd_driver);
if (error)
struct gtco *gtco;
struct input_dev *input_dev;
struct hid_descriptor *hid_desc;
- char *report = NULL;
+ char *report;
int result = 0, retry;
int error;
struct usb_endpoint_descriptor *endpoint;
le16_to_cpu(hid_desc->wDescriptorLength),
5000); /* 5 secs */
- if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+ dbg("usb_control_msg result: %d", result);
+ if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+ parse_hid_report_descriptor(gtco, report, result);
break;
+ }
}
+ kfree(report);
+
/* If we didn't get the report, fail */
- dbg("usb_control_msg result: :%d", result);
if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
err("Failed to get HID Report Descriptor of size: %d",
hid_desc->wDescriptorLength);
goto err_free_urb;
}
- /* Now we parse the report */
- parse_hid_report_descriptor(gtco, report, result);
-
- /* Now we delete it */
- kfree(report);
-
/* Create a device file node */
usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
gtco->buffer, gtco->buf_dma);
err_free_devs:
- kfree(report);
input_free_device(input_dev);
kfree(gtco);
return error;
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
struct jornada_ts {
struct input_dev *dev;
module_param(delay, int, 0);
MODULE_PARM_DESC(delay, "Set adc sample delay.");
+/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
/*
* Set adc mask function.
*
64000 / rpu);
}
+ /* Five wire panel? */
+ if (five_wire) {
+ dig3 |= WM9713_45W;
+ dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+ if (pil) {
+ dev_warn(wm->dev,
+ "Pressure measurement not supported in 5 "
+ "wire mode, disabling\n");
+ pil = 0;
+ }
+ }
+
/* touchpanel pressure */
if (pil == 2) {
dig3 |= WM9712_PIL;
goto alloc_err;
}
+ /* set up physical characteristics */
+ wm->codec->phy_init(wm);
+
+ /* load gpio cache */
+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
wm->input_dev = input_allocate_device();
if (wm->input_dev == NULL) {
ret = -ENOMEM;
/* set up touch configuration */
wm->input_dev->name = "wm97xx touchscreen";
+ wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
set_bit(EV_ABS, wm->input_dev->evbit);
if (ret < 0)
goto dev_alloc_err;
- /* set up physical characteristics */
- wm->codec->phy_init(wm);
-
- /* load gpio cache */
- wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
- wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
- wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
- wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
- wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
- wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
/* register our battery device */
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
if (!wm->battery_dev) {
EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
static struct device_driver wm97xx_driver = {
- .name = "ac97",
+ .name = "wm97xx-ts",
.bus = &ac97_bus_type,
.owner = THIS_MODULE,
.probe = wm97xx_probe,
{
g_cmsg= kmalloc(sizeof(_cmsg), GFP_KERNEL);
if (!g_cmsg)
- return ENOMEM;
+ return -ENOMEM;
g_debbuf = kmalloc(sizeof(_cdebbuf), GFP_KERNEL);
if (!g_debbuf) {
kfree(g_cmsg);
- return ENOMEM;
+ return -ENOMEM;
}
g_debbuf->buf = kmalloc(CDEBUG_GSIZE, GFP_KERNEL);
if (!g_debbuf->buf) {
kfree(g_cmsg);
kfree(g_debbuf);
- return ENOMEM;;
+ return -ENOMEM;;
}
g_debbuf->size = CDEBUG_GSIZE;
g_debbuf->buf[0] = 0;
#
config HYSDN
tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
- depends on m && PROC_FS && PCI && BROKEN_ON_SMP
+ depends on m && PROC_FS && PCI
help
Say Y here if you have one of Hypercope's active PCI ISDN cards
Champ, Ergo and Metro. You will then get a module called hysdn.
} /* ergo_interrupt */
/******************************************************************************/
-/* ergo_irq_bh is the function called by the immediate kernel task list after */
-/* being activated with queue_task and no interrupts active. This task is the */
-/* only one handling data transfer from or to the card after booting. The task */
-/* may be queued from everywhere (interrupts included). */
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work */
+/* queue sometime after a call to schedule_work has been made passing our */
+/* work_struct. This task is the only one handling data transfer from or to */
+/* the card after booting. The task may be queued from everywhere */
+/* (interrupts included). */
/******************************************************************************/
static void
ergo_irq_bh(struct work_struct *ugli_api)
card->hw_lock = 1; /* we now lock the hardware */
do {
- sti(); /* reenable other ints */
again = 0; /* assume loop not to be repeated */
if (!dpr->ToHyFlag) {
again = 1; /* restart loop */
}
} /* a message has arrived for us */
- cli(); /* no further ints */
if (again) {
dpr->ToHyInt = 1;
dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
/* the interrupts are still masked */
- sti();
msleep_interruptible(20); /* Timeout 20ms */
if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
dst = sp->Data; /* point to data in spool structure */
buflen = sp->Len; /* maximum len of spooled data */
wr_mirror = sp->WrPtr; /* only once read */
- sti();
/* try until all bytes written or error */
i = 0x1000; /* timeout value */
#endif /* CONFIG_HYSDN_CAPI */
return (0); /* success */
} /* data has arrived */
- sti();
msleep_interruptible(50); /* Timeout 50ms */
} /* wait until timeout */
default: s = "???"; break;
}
len += sprintf(page+len, "%-16s %s\n", "type", s);
- if ((s = cinfo->version[VER_DRIVER]) != 0)
+ if ((s = cinfo->version[VER_DRIVER]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_driver", s);
- if ((s = cinfo->version[VER_CARDTYPE]) != 0)
+ if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s);
- if ((s = cinfo->version[VER_SERIAL]) != 0)
+ if ((s = cinfo->version[VER_SERIAL]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_serial", s);
len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname);
{
int rc;
- led_cdev->dev = device_create(leds_class, parent, 0, "%s",
- led_cdev->name);
+ led_cdev->dev = device_create_drvdata(leds_class, parent, 0, led_cdev,
+ "%s", led_cdev->name);
if (IS_ERR(led_cdev->dev))
return PTR_ERR(led_cdev->dev);
- dev_set_drvdata(led_cdev->dev, led_cdev);
-
/* register the attributes */
rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
if (rc)
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* Unique numbering for lguest devices. */
-static unsigned int dev_index;
-
/* For Guests, device memory can be used as normal memory, so we cast away the
* __iomem to quieten sparse. */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
- return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages);
+ return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
}
static inline void lguest_unmap(void *addr)
* As Andrew Tridgell says, "Untested code is buggy code".
*
* It's worth reading this carefully: we start with a pointer to the new device
- * descriptor in the "lguest_devices" page. */
-static void add_lguest_device(struct lguest_device_desc *d)
+ * descriptor in the "lguest_devices" page, and the offset into the device
+ * descriptor page so we can uniquely identify it if things go badly wrong. */
+static void add_lguest_device(struct lguest_device_desc *d,
+ unsigned int offset)
{
struct lguest_device *ldev;
* it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
- printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
+ offset, d->type);
return;
}
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = &lguest_root;
/* We have a unique device index thanks to the dev_index counter. */
- ldev->vdev.index = dev_index++;
- /* The device type comes straight from the descriptor. There's also a
- * device vendor field in the virtio_device struct, which we leave as
- * 0. */
ldev->vdev.id.device = d->type;
/* We have a simple set of routines for querying the device's
* configuration information and setting its status. */
* virtio_device and calls device_register(). This makes the bus
* infrastructure look for a matching driver. */
if (register_virtio_device(&ldev->vdev) != 0) {
- printk(KERN_ERR "Failed to register lguest device %u\n",
- ldev->vdev.index);
+ printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
+ offset, d->type);
kfree(ldev);
}
}
break;
printk("Device at %i has size %u\n", i, desc_size(d));
- add_lguest_device(d);
+ add_lguest_device(d, i);
}
}
* bitmap file handling - read and write the bitmap file and its superblock
*/
-/* copy the pathname of a file to a buffer */
-char *file_path(struct file *file, char *buf, int count)
-{
- if (!buf)
- return NULL;
-
- buf = d_path(&file->f_path, buf, count);
-
- return IS_ERR(buf) ? NULL : buf;
-}
-
/*
* basic page I/O operations
*/
if (bitmap->file) {
path = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (path)
- ptr = file_path(bitmap->file, path, PAGE_SIZE);
+ ptr = d_path(&bitmap->file->f_path, path,
+ PAGE_SIZE);
+
printk(KERN_ALERT
"%s: kicking failed bitmap file %s from array!\n",
- bmname(bitmap), ptr ? ptr : "");
+ bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
kfree(path);
} else
static void md_print_devices(void);
+static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
+
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
/*
atomic_set(&new->active, 1);
spin_lock_init(&new->write_lock);
init_waitqueue_head(&new->sb_wait);
+ init_waitqueue_head(&new->recovery_wait);
new->reshape_position = MaxSector;
new->resync_max = MaxSector;
new->level = LEVEL_NONE;
}
static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded);
+static ssize_t
+sync_force_parallel_show(mddev_t *mddev, char *page)
+{
+ return sprintf(page, "%d\n", mddev->parallel_resync);
+}
+
+static ssize_t
+sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ long n;
+
+ if (strict_strtol(buf, 10, &n))
+ return -EINVAL;
+
+ if (n != 0 && n != 1)
+ return -EINVAL;
+
+ mddev->parallel_resync = n;
+
+ if (mddev->sync_thread)
+ wake_up(&resync_wait);
+
+ return len;
+}
+
+/* force parallel resync, even with shared block devices */
+static struct md_sysfs_entry md_sync_force_parallel =
+__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR,
+ sync_force_parallel_show, sync_force_parallel_store);
+
static ssize_t
sync_speed_show(mddev_t *mddev, char *page)
{
&md_sync_min.attr,
&md_sync_max.attr,
&md_sync_speed.attr,
+ &md_sync_force_parallel.attr,
&md_sync_completed.attr,
&md_max_sync.attr,
&md_suspend_lo.attr,
module_put(mddev->pers->owner);
mddev->pers = NULL;
+ /* tell userspace to handle 'inactive' */
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
set_capacity(disk, 0);
mddev->changed = 1;
if (!buf)
goto out;
- ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname));
- if (!ptr)
+ ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname));
+ if (IS_ERR(ptr))
goto out;
strcpy(file->pathname, ptr);
atomic_sub(blocks, &mddev->recovery_active);
wake_up(&mddev->recovery_wait);
if (!ok) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread(mddev->thread);
// stop recovery, signal do_sync ....
}
md_wakeup_thread(mddev->thread);
}
spin_unlock_irq(&mddev->write_lock);
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
}
- wait_event(mddev->sb_wait, mddev->flags==0);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
}
void md_write_end(mddev_t *mddev)
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
+
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
+ /* wait for the dirty state to be recorded in the metadata */
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
} else
spin_unlock_irq(&mddev->write_lock);
}
EXPORT_SYMBOL_GPL(md_allow_write);
-static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
-
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
for_each_mddev(mddev2, tmp) {
if (mddev2 == mddev)
continue;
- if (mddev2->curr_resync &&
- match_mddev_units(mddev,mddev2)) {
+ if (!mddev->parallel_resync
+ && mddev2->curr_resync
+ && match_mddev_units(mddev, mddev2)) {
DEFINE_WAIT(wq);
if (mddev < mddev2 && mddev->curr_resync == 2) {
/* arbitrarily yield */
window/2,(unsigned long long) max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
- init_waitqueue_head(&mddev->recovery_wait);
last_check = 0;
if (j>2) {
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto out;
}
last_check = io_sectors;
- if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) ||
- test_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
break;
repeat:
/* tell personality that we are finished */
mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
+ if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
mddev->curr_resync > 2) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
}
if (mddev->degraded) {
- rdev_for_each(rdev, rtmp, mddev)
+ rdev_for_each(rdev, rtmp, mddev) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags))
+ spares++;
if (rdev->raid_disk < 0
&& !test_bit(Faulty, &rdev->flags)) {
rdev->recovery_offset = 0;
} else
break;
}
+ }
}
return spares;
}
* to do that as needed.
* When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in
* "->recovery" and create a thread at ->sync_thread.
- * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR)
+ * When the thread finishes it sets MD_RECOVERY_DONE
* and wakeups up this thread which will reap the thread and finish up.
* This thread also removes any faulty devices (with nr_pending == 0).
*
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
/* success...*/
/* activate any spares */
mddev->pers->spare_active(mddev);
* might be left set
*/
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- clear_bit(MD_RECOVERY_ERR, &mddev->recovery);
clear_bit(MD_RECOVERY_INTR, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
if (rdev) {
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
- printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number);
+ printk(KERN_ERR "hot-remove-disk, slot %d is identified"
+ " but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
r1bio_t *r1_bio;
struct bio *read_bio;
int i, targets = 0, disks;
- struct bitmap *bitmap = mddev->bitmap;
+ struct bitmap *bitmap;
unsigned long flags;
struct bio_list bl;
struct page **behind_pages = NULL;
wait_barrier(conf);
+ bitmap = mddev->bitmap;
+
disk_stat_inc(mddev->gendisk, ios[rw]);
disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
} else
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices is recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded < conf->raid_disks) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
} else {
/* fixup the bio for reuse */
+ int size;
sbio->bi_vcnt = vcnt;
sbio->bi_size = r1_bio->sectors << 9;
sbio->bi_idx = 0;
sbio->bi_sector = r1_bio->sector +
conf->mirrors[i].rdev->data_offset;
sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
- for (j = 0; j < vcnt ; j++)
- memcpy(page_address(sbio->bi_io_vec[j].bv_page),
+ size = sbio->bi_size;
+ for (j = 0; j < vcnt ; j++) {
+ struct bio_vec *bi;
+ bi = &sbio->bi_io_vec[j];
+ bi->bv_offset = 0;
+ if (size > PAGE_SIZE)
+ bi->bv_len = PAGE_SIZE;
+ else
+ bi->bv_len = size;
+ size -= PAGE_SIZE;
+ memcpy(page_address(bi->bv_page),
page_address(pbio->bi_io_vec[j].bv_page),
PAGE_SIZE);
+ }
}
}
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
err = -EBUSY;
goto abort;
}
+ /* Only remove faulty devices in recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ enough(conf)) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
if (!uptodate)
md_error(mddev, conf->mirrors[d].rdev);
+
update_head_pos(i, r10_bio);
while (atomic_dec_and_test(&r10_bio->remaining)) {
if (rb2)
atomic_dec(&rb2->remaining);
r10_bio = rb2;
- if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (!test_and_set_bit(MD_RECOVERY_INTR,
+ &mddev->recovery))
printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
mdname(mddev));
break;
#define __inline__
#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
/*
* if recovery was running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
printk (KERN_ALERT
* have quiesced.
*/
if ((s->uptodate == disks - 1) &&
+ (s->failed && disk_idx == s->failed_num) &&
!test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
set_bit(R5_Wantcompute, &dev->flags);
/* we would like to get this block, possibly
* by computing it, but we might not be able to
*/
- if (s->uptodate == disks-1) {
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (i == r6s->failed_num[0] ||
+ i == r6s->failed_num[1]))) {
pr_debug("Computing stripe %llu block %d\n",
(unsigned long long)sh->sector, i);
compute_block_1(sh, i, 0);
struct r5dev *dev;
unsigned long pending = 0;
mdk_rdev_t *blocked_rdev = NULL;
+ int prexor;
memset(&s, 0, sizeof(s));
pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
/* leave prexor set until postxor is done, allows us to distinguish
* a rmw from a rcw during biodrain
*/
+ prexor = 0;
if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
+ prexor = 1;
clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
if (!test_and_set_bit(
STRIPE_OP_IO, &sh->ops.pending))
sh->ops.count++;
+ if (prexor)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
(i == sh->pd_idx && s.failed == 0))
set_bit(STRIPE_INSYNC, &sh->state);
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices if recovery
+ * isn't possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded <= conf->max_degraded) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
# Makefile for the kernel multimedia device drivers.
#
-obj-y := common/
-
-obj-$(CONFIG_VIDEO_MEDIA) += common/
-
-# Since hybrid devices are here, should be compiled if DVB and/or V4L
-obj-$(CONFIG_VIDEO_MEDIA) += video/
+obj-y += common/ video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
tristate
default VIDEO_MEDIA && I2C
depends on VIDEO_MEDIA && I2C
+ select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
MXL_QAM,
MXL_ANALOG_CABLE,
MXL_ANALOG_OTA
-} tuner_modu_type;
+};
/* MXL5005 Tuner Register Struct */
struct TunerReg {
RFSYN_DIVM, /* 88 */
DN_BYPASS_AGC_I2C /* 89 */
#endif
-} MXL5005_ControlName;
+};
/*
* The following context is source code provided by MaxLinear.
unsigned char *regs = priv->tda18271_regs;
u8 val;
- tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
regs[R_EB14] = val;
- return 0;
+ return ret;
}
/*
unsigned char buf[] = {0x22, 0x01};
int arg;
int gp_func;
- struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) };
if (NULL == priv->cfg) {
dprintk("tda827x_config not defined, cannot set LNA gain!\n");
return;
}
+ msg.addr = priv->cfg->switch_addr;
if (priv->cfg->config) {
if (high)
dprintk("setting LNA to high gain\n");
{
struct tea5761_priv *priv = NULL;
- if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL)
+ if (tea5761_autodetection(i2c_adap, i2c_addr) != 0)
return NULL;
priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
__ret; \
})
+#define hybrid_tuner_report_instance_count(state) \
+({ \
+ int __ret = 0; \
+ if (state) \
+ __ret = state->i2c_props.count; \
+ __ret; \
+})
+
#endif /* __TUNER_I2C_H__ */
fe->ops.i2c_gate_ctrl(fe, 1);
if (1 != i2c_transfer(i2c_adap, &msg, 1))
- tuner_warn("unable to probe %s, proceeding anyway.",
- tuners[type].name);
+ printk(KERN_WARNING "tuner-simple %d-%04x: "
+ "unable to probe %s, proceeding anyway.",
+ i2c_adapter_id(i2c_adap), i2c_addr,
+ tuners[type].name);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
"default firmware name\n");
-static LIST_HEAD(xc2028_list);
+static LIST_HEAD(hybrid_tuner_instance_list);
static DEFINE_MUTEX(xc2028_list_mutex);
/* struct for storing firmware table */
};
struct xc2028_data {
- struct list_head xc2028_list;
+ struct list_head hybrid_tuner_instance_list;
struct tuner_i2c_props i2c_props;
int (*tuner_callback) (void *dev,
int command, int arg);
void *video_dev;
- int count;
__u32 frequency;
struct firmware_description *firm;
mutex_lock(&xc2028_list_mutex);
- priv->count--;
-
- if (!priv->count) {
- list_del(&priv->xc2028_list);
-
+ /* only perform final cleanup if this is the last instance */
+ if (hybrid_tuner_report_instance_count(priv) == 1) {
kfree(priv->ctrl.fname);
-
free_firmware(priv);
- kfree(priv);
- fe->tuner_priv = NULL;
}
+ if (priv)
+ hybrid_tuner_release_state(priv);
+
mutex_unlock(&xc2028_list_mutex);
+ fe->tuner_priv = NULL;
+
return 0;
}
struct xc2028_config *cfg)
{
struct xc2028_data *priv;
- void *video_dev;
+ int instance;
if (debug)
printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
return NULL;
}
- video_dev = cfg->i2c_adap->algo_data;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev);
-
mutex_lock(&xc2028_list_mutex);
- list_for_each_entry(priv, &xc2028_list, xc2028_list) {
- if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) {
- video_dev = NULL;
- if (debug)
- printk(KERN_DEBUG "xc2028: reusing device\n");
-
- break;
- }
- }
-
- if (video_dev) {
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- mutex_unlock(&xc2028_list_mutex);
- return NULL;
- }
-
- priv->i2c_props.addr = cfg->i2c_addr;
- priv->i2c_props.adap = cfg->i2c_adap;
- priv->i2c_props.name = "xc2028";
-
- priv->video_dev = video_dev;
+ instance = hybrid_tuner_request_state(struct xc2028_data, priv,
+ hybrid_tuner_instance_list,
+ cfg->i2c_adap, cfg->i2c_addr,
+ "xc2028");
+ switch (instance) {
+ case 0:
+ /* memory allocation failure */
+ goto fail;
+ break;
+ case 1:
+ /* new tuner instance */
priv->tuner_callback = cfg->callback;
priv->ctrl.max_len = 13;
mutex_init(&priv->lock);
- list_add_tail(&priv->xc2028_list, &xc2028_list);
- }
-
- fe->tuner_priv = priv;
- priv->count++;
+ /* analog side (tuner-core) uses i2c_adap->algo_data.
+ * digital side is not guaranteed to have algo_data defined.
+ *
+ * digital side will always have fe->dvb defined.
+ * analog side (tuner-core) doesn't (yet) define fe->dvb.
+ */
+ priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
+ fe->dvb->priv : cfg->i2c_adap->algo_data;
- if (debug)
- printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count);
+ fe->tuner_priv = priv;
+ break;
+ case 2:
+ /* existing tuner instance */
+ fe->tuner_priv = priv;
+ break;
+ }
memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
sizeof(xc2028_dvb_tuner_ops));
mutex_unlock(&xc2028_list_mutex);
return fe;
+fail:
+ mutex_unlock(&xc2028_list_mutex);
+
+ xc2028_dvb_release(fe);
+ return NULL;
}
EXPORT_SYMBOL(xc2028_attach);
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
- u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+ u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
int buffer_offset = 0;
struct dvbt_set_parameters_msg {
uint8_t cmd;
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
} __attribute__((packed));
struct dvbt_get_status_msg {
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
- uint16_t gain;
+ __le16 gain;
uint8_t snr;
- uint32_t viterbi_error_rate;
- uint32_t rs_error_rate;
- uint32_t uncorrected_block_count;
+ __le32 viterbi_error_rate;
+ __le32 rs_error_rate;
+ __le32 uncorrected_block_count;
uint8_t lock_bits;
uint8_t prev_lock_bits;
} __attribute__((packed));
wait_queue_head_t poll_wq;
int pending_fe_events;
int disconnect_pending;
+ unsigned int uncorrected_block_count;
atomic_t inuse;
void *streambuf;
char phys[64];
struct delayed_work rc_query_work;
int rc_input_event;
- u32 rc_last_code;
+ __le32 rc_last_code;
unsigned long last_event_jiffies;
#endif
};
struct cinergyt2_rc_event {
char type;
- uint32_t value;
+ __le32 value;
} __attribute__((packed));
static const uint32_t rc_keys[] = {
{
uint32_t unc_count;
- unc_count = stat->uncorrected_block_count;
- stat->uncorrected_block_count = 0;
+ if (mutex_lock_interruptible(&cinergyt2->sem))
+ return -ERESTARTSYS;
+ unc_count = cinergyt2->uncorrected_block_count;
+ cinergyt2->uncorrected_block_count = 0;
+ mutex_unlock(&cinergyt2->sem);
/* UNC are already converted to host byte order... */
return put_user(unc_count,(__u32 __user *) arg);
input_sync(cinergyt2->rc_input_dev);
cinergyt2->rc_input_event = KEY_MAX;
}
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
}
goto out;
}
n, le32_to_cpu(rc_events[n].value), rc_events[n].type);
if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC &&
- rc_events[n].value == ~0) {
+ rc_events[n].value == cpu_to_le32(~0)) {
/* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
if (cinergyt2->rc_input_event != KEY_MAX) {
if (rc_events[n].value == cinergyt2->rc_last_code &&
- cinergyt2->rc_last_code != ~0) {
+ cinergyt2->rc_last_code != cpu_to_le32(~0)) {
/* emit a key-up so the double event is recognized */
dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
input_report_key(cinergyt2->rc_input_dev,
usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
cinergyt2->rc_input_event = KEY_MAX;
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc);
input_dev->name = DRIVER_NAME " remote control";
input_dev->keycodesize = 0;
input_dev->keycodemax = 0;
input_dev->id.bustype = BUS_USB;
- input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor;
- input_dev->id.product = cinergyt2->udev->descriptor.idProduct;
+ input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor);
+ input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct);
input_dev->id.version = 1;
input_dev->dev.parent = &cinergyt2->udev->dev;
char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS };
struct dvbt_get_status_msg *s = &cinergyt2->status;
uint8_t lock_bits;
- uint32_t unc;
if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return;
- unc = s->uncorrected_block_count;
lock_bits = s->lock_bits;
cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s));
- unc += le32_to_cpu(s->uncorrected_block_count);
- s->uncorrected_block_count = unc;
+ cinergyt2->uncorrected_block_count +=
+ le32_to_cpu(s->uncorrected_block_count);
if (lock_bits != s->lock_bits) {
wake_up_interruptible(&cinergyt2->poll_wq);
* stolen from eth.c out of the linux kernel, hacked for dvb-device
* by Michael Holzt <kju@debian.org>
*/
-static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb,
+static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
struct net_device *dev)
{
struct ethhdr *eth;
if(ext_len >= 0) {
p->ule_next_hdr += ext_len;
if (!p->ule_bridged) {
- p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr);
+ p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr);
p->ule_next_hdr += 2;
} else {
- p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
+ p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
/* This assures the extension handling loop will terminate. */
}
}
if (ule_optional_ext_handlers[htype])
(void)ule_optional_ext_handlers[htype]( p );
p->ule_next_hdr += ext_len;
- p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) );
+ p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) );
/*
* note: the length of the next header type is included in the
* length of THIS optional extension header
/* Check for complete payload. */
if (priv->ule_sndu_remain <= 0) {
/* Check CRC32, we've got it in our skb already. */
- unsigned short ulen = htons(priv->ule_sndu_len);
- unsigned short utype = htons(priv->ule_sndu_type);
+ __be16 ulen = htons(priv->ule_sndu_len);
+ __be16 utype = htons(priv->ule_sndu_type);
const u8 *tail;
struct kvec iov[3] = {
{ &ulen, sizeof ulen },
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C
+ depends on DVB_CORE && USB && I2C && INPUT
depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
help
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
}
return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
{
struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
- if (desc->idVendor == USB_VID_PINNACLE &&
- desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX)
+ if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
struct i2c_adapter *tun_i2c;
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
}
if (st->is_dib7000pc)
/* STK7070P */
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
{
- if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E)
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
if ((*pos + hx->len + 4) >= fw->size)
return -EINVAL;
- hx->addr = le16_to_cpu( *((u16 *) &b[1]) );
+ hx->addr = b[1] | (b[2] << 8);
hx->type = b[3];
if (hx->type == 0x04) {
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
- return EINVAL;
+ return -EINVAL;
if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Set DVB mode to 1 */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
/* Abort possible TS (if previous tune crashed) */
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
+#include <asm/unaligned.h>
/* debug */
static int dvb_usb_m920x_debug;
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
- value = le16_to_cpu(*(u16 *)(fw->data + i));
+ value = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- index = le16_to_cpu(*(u16 *)(fw->data + i));
+ index = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- size = le16_to_cpu(*(u16 *)(fw->data + i));
+ size = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
if (pass == 1) {
u8 flip_chip;
};
-extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg);
+#else
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
extern u16 dib0070_wbd_offset(struct dvb_frontend *);
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
-extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg);
+#else
+static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
reg, err);
return -EREMOTEIO;
}
- return le16_to_cpup((u16*)buf);
+ return buf[0] | (buf[1] << 8);
}
static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
dprintk("Firmware is %Zd bytes\n",fw->size);
/* Get size of firmware A and B */
- firmwareAsize = le32_to_cpu(*((u32*)fw->data));
+ firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
dprintk("FirmwareA is %i bytes\n",firmwareAsize);
- firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
+ firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
dprintk("FirmwareB is %i bytes\n",firmwareBsize);
/* Upload firmware */
#include <linux/crc32.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
+#include <asm/unaligned.h>
#include <asm/system.h>
ptr += 4;
/* check dpram file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len >= 512) {
printk("dvb-ttpci: dpram file is way too big.\n");
ptr += len;
/* check root file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len <= 200000 || len >= 300000 ||
static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock)
{
- int i, n;
+ unsigned i, n;
int progressive = 0;
+ int match = 0;
dprintk(2, "av7110:%p, \n", av7110);
return -EBUSY;
}
- for (i = 0; i < len - 5; i++) {
- /* get progressive flag from picture extension */
- if (buf[i] == 0x00 && buf[i+1] == 0x00 &&
- buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 &&
- (buf[i+4] & 0xf0) == 0x10)
- progressive = buf[i+5] & 0x08;
+ /* search in buf for instances of 00 00 01 b5 1? */
+ for (i = 0; i < len; i++) {
+ unsigned char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (match == 5) {
+ progressive = c & 0x08;
+ match = 0;
+ }
+ if (c == 0x00) {
+ match = (match == 1 || match == 2) ? 2 : 1;
+ continue;
+ }
+ switch (match++) {
+ case 2: if (c == 0x01)
+ continue;
+ break;
+ case 3: if (c == 0xb5)
+ continue;
+ break;
+ case 4: if ((c & 0xf0) == 0x10)
+ continue;
+ break;
+ }
+ match = 0;
}
/* setting n always > 1, fixes problems when playing stillframes
u16 csum = 0, cc;
int i;
for (i = 0; i < len; i += 2)
- csum ^= le16_to_cpup((u16 *) (muxpack + i));
+ csum ^= le16_to_cpup((__le16 *) (muxpack + i));
if (csum) {
printk("%s: muxpack with incorrect checksum, ignoring\n",
__func__);
config DVB_TTUSB_DEC
tristate "Technotrend/Hauppauge USB DEC devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
select CRC32
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
- unsigned int tmp;
+ __be32 tmp;
dprintk("%s\n", __func__);
0x00, 0x00, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff };
- u16 pcr = htons(dec->pid[DMX_PES_PCR]);
- u16 audio = htons(dec->pid[DMX_PES_AUDIO]);
- u16 video = htons(dec->pid[DMX_PES_VIDEO]);
+ __be16 pcr = htons(dec->pid[DMX_PES_PCR]);
+ __be16 audio = htons(dec->pid[DMX_PES_AUDIO]);
+ __be16 video = htons(dec->pid[DMX_PES_VIDEO]);
dprintk("%s\n", __func__);
case 0x01: { /* VideoStream */
int prebytes = pva[5] & 0x03;
int postbytes = (pva[5] & 0x0c) >> 2;
- u16 v_pes_payload_length;
+ __be16 v_pes_payload_length;
if (output_pva) {
dec->video_filter->feed->cb.ts(pva, length, NULL, 0,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00 };
- u16 pid;
+ __be16 pid;
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
u8 *firmware = NULL;
size_t firmware_size = 0;
u16 firmware_csum = 0;
- u16 firmware_csum_ns;
- u32 firmware_size_nl;
- u32 crc32_csum, crc32_check, tmp;
+ __be16 firmware_csum_ns;
+ __be32 firmware_size_nl;
+ u32 crc32_csum, crc32_check;
+ __be32 tmp;
const struct firmware *fw_entry = NULL;
dprintk("%s\n", __func__);
valid. */
crc32_csum = crc32(~0L, firmware, 56) ^ ~0L;
memcpy(&tmp, &firmware[56], 4);
- crc32_check = htonl(tmp);
+ crc32_check = ntohl(tmp);
if (crc32_csum != crc32_check) {
printk("%s: crc32 check of DSP code failed (calculated "
"0x%08x != 0x%08x in file), file invalid.\n",
usb_set_intfdata(intf, (void *)dec);
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
ttusb_dec_set_model(dec, TTUSB_DEC3000S);
break;
ttusb_dec_init_dvb(dec);
dec->adapter.priv = dec;
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
break;
0x00, 0x00, 0x00, 0xff,
0x00, 0x00, 0x00, 0xff };
- u32 freq = htonl(p->frequency / 1000);
+ __be32 freq = htonl(p->frequency / 1000);
memcpy(&b[4], &freq, sizeof (u32));
state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00 };
- u32 freq;
- u32 sym_rate;
- u32 band;
- u32 lnb_voltage;
+ __be32 freq;
+ __be32 sym_rate;
+ __be32 band;
+ __be32 lnb_voltage;
freq = htonl(p->frequency +
(state->hi_band ? LOF_HI : LOF_LO));
config SOC_CAMERA
tristate "SoC camera support"
- depends on VIDEO_V4L2
+ depends on VIDEO_V4L2 && HAS_DMA
select VIDEOBUF_DMA_SG
help
SoC Camera is a common API to several cameras, not connecting
config VIDEO_AU0828
tristate "Auvitek AU0828 support"
- depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB
+ depends on I2C && INPUT && DVB_CORE && USB
select I2C_ALGOBIT
select VIDEO_TVEEPROM
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
return -1;
}
- /* Put the analog decoder in standby to keep it quiet */
- au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL);
-
- if (dvb->frontend->ops.analog_ops.standby)
- dvb->frontend->ops.analog_ops.standby(dvb->frontend);
-
/* register everything */
ret = dvb_register(dev);
if (ret < 0) {
#include <linux/firmware.h>
#include <net/checksum.h>
+#include <asm/unaligned.h>
#include <asm/io.h>
#include "bttvp.h"
ee += i;
/* found a valid descriptor */
- type = be16_to_cpup((u16*)(ee+4));
+ type = get_unaligned_be16((__be16 *)(ee+4));
switch(type) {
/* 848 based */
btv->c.nr, type);
break;
}
- serial = be32_to_cpup((u32*)(ee+6));
+ serial = get_unaligned_be32((__be32 *)(ee+6));
}
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
struct bttv_fh *fh = priv;
mutex_lock(&fh->cap.vb_lock);
- retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
+ retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
V4L2_MEMORY_MMAP);
if (retval < 0) {
mutex_unlock(&fh->cap.vb_lock);
{
u32 instructions,line,todo;
struct scatterlist *sg;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
unsigned int cpadding)
{
unsigned int instructions,line,todo,ylen,chroma;
- u32 *rp,ri;
+ __le32 *rp;
+ u32 ri;
struct scatterlist *ysg;
struct scatterlist *usg;
struct scatterlist *vsg;
{
int dwords,rc,line,maxy,start,end,skip,nskips;
struct btcx_skiplist *skips;
- u32 *rp,ri,ra;
+ __le32 *rp;
+ u32 ri,ra;
u32 addr;
/* skip list for window clipping */
struct btcx_riscmem *risc,
unsigned int size)
{
- u32 *cpu;
+ __le32 *cpu;
dma_addr_t dma;
if (NULL != risc->cpu && risc->size < size)
*/
struct btcx_riscmem {
unsigned int size;
- u32 *cpu;
- u32 *jmp;
+ __le32 *cpu;
+ __le32 *jmp;
dma_addr_t dma;
};
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id cs5345_id[] = {
+ { "cs5345", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cs5345_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cs5345",
.driverid = I2C_DRIVERID_CS5345,
.command = cs5345_command,
.probe = cs5345_probe,
+ .id_table = cs5345_id,
};
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "cs53l32a");
+ if (!id)
+ strlcpy(client->name, "cs53l32a", sizeof(client->name));
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
return 0;
}
+static const struct i2c_device_id cs53l32a_id[] = {
+ { "cs53l32a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cs53l32a_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cs53l32a",
.driverid = I2C_DRIVERID_CS53L32A,
.command = cs53l32a_command,
.probe = cs53l32a_probe,
+ .id_table = cs53l32a_id,
};
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
cx18_av_write(cx, 0x808, 0xf7);
+ cx18_av_write(cx, 0x80b, 0x02);
} else if (std == V4L2_STD_NTSC_M_KR) {
/* South Korea uses A2 audio standard */
cx18_av_write(cx, 0x808, 0xf8);
+ cx18_av_write(cx, 0x80b, 0x03);
} else {
/* Others use the BTSC audio standard */
cx18_av_write(cx, 0x808, 0xf6);
+ cx18_av_write(cx, 0x80b, 0x01);
}
- cx18_av_write(cx, 0x80b, 0x00);
} else if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx18_av_write(cx, 0x808, 0xff);
{
struct cx18_av_state *state = &cx->av_state;
u8 download_ctl = cx18_av_read(cx, 0x803);
- u8 mod_det_stat0 = cx18_av_read(cx, 0x805);
- u8 mod_det_stat1 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
u8 audio_config = cx18_av_read(cx, 0x808);
u8 pref_mode = cx18_av_read(cx, 0x809);
u8 afc0 = cx18_av_read(cx, 0x80b);
case 0x12: p = "dual with SAP"; break;
case 0x14: p = "tri with SAP"; break;
case 0xfe: p = "forced mode"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio mode: %s\n", p);
switch (mod_det_stat1) {
- case 0x00: p = "BTSC"; break;
+ case 0x00: p = "not defined"; break;
case 0x01: p = "EIAJ"; break;
case 0x02: p = "A2-M"; break;
case 0x03: p = "A2-BG"; break;
case 0x0b: p = "NICAM-I"; break;
case 0x0c: p = "NICAM-L"; break;
case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+ case 0x0e: p = "IF FM Radio"; break;
+ case 0x0f: p = "BTSC"; break;
+ case 0x10: p = "detected chrominance"; break;
+ case 0xfd: p = "unknown audio standard"; break;
+ case 0xfe: p = "forced audio standard"; break;
case 0xff: p = "no detected audio standard"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio standard: %s\n", p);
CX18_INFO("Audio muted: %s\n",
(download_ctl & 0x10) ? "running" : "stopped");
switch (audio_config >> 4) {
- case 0x00: p = "BTSC"; break;
- case 0x01: p = "EIAJ"; break;
- case 0x02: p = "A2-M"; break;
- case 0x03: p = "A2-BG"; break;
- case 0x04: p = "A2-DK1"; break;
- case 0x05: p = "A2-DK2"; break;
- case 0x06: p = "A2-DK3"; break;
- case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
- case 0x08: p = "AM-L"; break;
- case 0x09: p = "NICAM-BG"; break;
- case 0x0a: p = "NICAM-DK"; break;
- case 0x0b: p = "NICAM-I"; break;
- case 0x0c: p = "NICAM-L"; break;
- case 0x0d: p = "FM radio"; break;
+ case 0x00: p = "undefined"; break;
+ case 0x01: p = "BTSC"; break;
+ case 0x02: p = "EIAJ"; break;
+ case 0x03: p = "A2-M"; break;
+ case 0x04: p = "A2-BG"; break;
+ case 0x05: p = "A2-DK1"; break;
+ case 0x06: p = "A2-DK2"; break;
+ case 0x07: p = "A2-DK3"; break;
+ case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+ case 0x09: p = "AM-L"; break;
+ case 0x0a: p = "NICAM-BG"; break;
+ case 0x0b: p = "NICAM-DK"; break;
+ case 0x0c: p = "NICAM-I"; break;
+ case 0x0d: p = "NICAM-L"; break;
+ case 0x0e: p = "FM radio"; break;
case 0x0f: p = "automatic detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio standard: %s\n", p);
case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
case 0x04: p = "STEREO"; break;
- case 0x05: p = "DUAL1 (AB)"; break;
- case 0x06: p = "DUAL2 (AC) (FM)"; break;
- case 0x07: p = "DUAL3 (BC) (FM)"; break;
- case 0x08: p = "DUAL4 (AC) (AM)"; break;
- case 0x09: p = "DUAL5 (BC) (AM)"; break;
- case 0x0a: p = "SAP"; break;
+ case 0x05: p = "DUAL1 (AC)"; break;
+ case 0x06: p = "DUAL2 (BC)"; break;
+ case 0x07: p = "DUAL3 (AB)"; break;
default: p = "undefined";
}
CX18_INFO("Configured audio mode: %s\n", p);
case 0x06: p = "BTSC"; break;
case 0x07: p = "EIAJ"; break;
case 0x08: p = "A2-M"; break;
- case 0x09: p = "FM Radio"; break;
+ case 0x09: p = "FM Radio (4.5 MHz)"; break;
+ case 0x0a: p = "FM Radio (5.5 MHz)"; break;
+ case 0x0b: p = "S-Video"; break;
case 0x0f: p = "automatic standard and mode detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio system: %s\n", p);
}
case 5: p = "language AC"; break;
case 6: p = "language BC"; break;
case 7: p = "language AB"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Preferred audio mode: %s\n", p);
if ((audio_config & 0xf) == 0xf) {
- switch ((afc0 >> 2) & 0x1) {
+ switch ((afc0 >> 3) & 0x1) {
case 0: p = "system DK"; break;
case 1: p = "system L"; break;
}
CX18_INFO("Selected 65 MHz format: %s\n", p);
- switch (afc0 & 0x3) {
- case 0: p = "BTSC"; break;
- case 1: p = "EIAJ"; break;
- case 2: p = "A2-M"; break;
- default: p = "undefined";
+ switch (afc0 & 0x7) {
+ case 0: p = "Chroma"; break;
+ case 1: p = "BTSC"; break;
+ case 2: p = "EIAJ"; break;
+ case 3: p = "A2-M"; break;
+ case 4: p = "autodetect"; break;
+ default: p = "undefined"; break;
}
CX18_INFO("Selected 45 MHz format: %s\n", p);
}
/* ------------------------------------------------------------------------- */
-/* Compro VideoMate H900: not working at the moment! */
+/* Compro VideoMate H900: note that this card is analog only! */
static const struct cx18_card_pci_info cx18_pci_h900[] = {
{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
static const struct cx18_card cx18_card_h900 = {
.type = CX18_CARD_COMPRO_H900,
.name = "Compro VideoMate H900",
- .comment = "DVB & VBI are not yet supported\n",
+ .comment = "VBI is not yet supported\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
{
if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
/* First try to allocate sliced VBI buffers if needed. */
CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
struct cx2341x_mpeg_params p = cx->params;
- int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd);
+ int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd);
if (err)
return err;
CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
return cx2341x_ext_ctrls(&cx->params,
- atomic_read(&cx->capturing), arg, cmd);
+ atomic_read(&cx->ana_capturing), arg, cmd);
return -EINVAL;
}
cx18_init_power(cx, 1);
cx18_init_memory(cx);
- cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET);
+ cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
- retval = cx18_streams_setup(cx);
- if (retval) {
- CX18_ERR("Error %d setting up streams\n", retval);
- goto free_irq;
- }
- retval = cx18_streams_register(cx);
- if (retval) {
- CX18_ERR("Error %d registering devices\n", retval);
- goto free_streams;
- }
-
if (cx->options.tuner > -1) {
struct tuner_setup setup;
are not. */
cx->tuner_std = cx->std;
- cx18_init_on_first_open(cx);
+ retval = cx18_streams_setup(cx);
+ if (retval) {
+ CX18_ERR("Error %d setting up streams\n", retval);
+ goto free_irq;
+ }
+ retval = cx18_streams_register(cx);
+ if (retval) {
+ CX18_ERR("Error %d registering devices\n", retval);
+ goto free_streams;
+ }
CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name);
/* Stop all captures */
CX18_DEBUG_INFO("Stopping all streams\n");
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
cx18_stop_all_captures(cx);
/* Interrupts */
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* Hardware description of the board */
unsigned mdl_offset;
- struct cx18_scb *scb; /* pointer to SCB */
+ struct cx18_scb __iomem *scb; /* pointer to SCB */
struct cx18_av_state av_state;
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
unsigned long i_flags; /* global cx18 flags */
- atomic_t capturing; /* count number of active capture streams */
+ atomic_t ana_capturing; /* count number of active analog capture streams */
+ atomic_t tot_capturing; /* total count number of active capture streams */
spinlock_t lock; /* lock access to this struct */
int search_pack_header;
struct mutex i2c_bus_lock[2];
struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
+ /* gpio */
+ u32 gpio_dir;
+ u32 gpio_val;
+
/* v4l2 and User settings */
/* codec settings */
size_t tot_written = 0;
int single_frame = 0;
- if (atomic_read(&cx->capturing) == 0 && s->id == -1) {
+ if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) {
/* shouldn't happen */
CX18_DEBUG_WARN("Stream %s not initialized before read\n",
s->name);
cx18_enqueue(s, buf, &s->q_free);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5,
s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] -
+ cx->enc_mem,
1, buf->id, s->buf_size);
} else
cx18_enqueue(s, buf, &s->q_io);
cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
cx18_audio_set_io(cx);
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* Undo video mute */
cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
cx->params.video_mute |
}
if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* switching to radio while capture is
in progress is not polite */
cx18_release_stream(s);
void cx18_mute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing))
+ if (atomic_read(&cx->ana_capturing))
cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
cx18_find_handle(cx), 1);
CX18_DEBUG_INFO("Mute\n");
void cx18_unmute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing)) {
+ if (atomic_read(&cx->ana_capturing)) {
cx18_msleep_timeout(100, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
cx18_find_handle(cx), 12);
#define CX18_REG_GPIO_OUT2 0xc78104
#define CX18_REG_GPIO_DIR2 0xc7810c
-static u32 gpio_dir;
-static u32 gpio_val;
-
/*
* HVR-1600 GPIO pins, courtesy of Hauppauge:
*
static void gpio_write(struct cx18 *cx)
{
- write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
- write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff),
+ u32 dir = cx->gpio_dir;
+ u32 val = cx->gpio_val;
+
+ write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
+ write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
CX18_REG_GPIO_OUT1);
- write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2);
- write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16),
+ write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
+ write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
CX18_REG_GPIO_OUT2);
}
void cx18_gpio_init(struct cx18 *cx)
{
- gpio_dir = cx->card->gpio_init.direction;
- gpio_val = cx->card->gpio_init.initial_value;
+ cx->gpio_dir = cx->card->gpio_init.direction;
+ cx->gpio_val = cx->card->gpio_init.initial_value;
- if (gpio_dir == 0)
- return;
+ if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+ cx->gpio_dir |= 1 << cx->card->xceive_pin;
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
+ }
- gpio_dir |= 1 << cx->card->xceive_pin;
- gpio_val |= 1 << cx->card->xceive_pin;
+ if (cx->gpio_dir == 0)
+ return;
CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2),
return 0;
CX18_DEBUG_INFO("Resetting tuner\n");
- gpio_dir |= 1 << cx->card->xceive_pin;
- gpio_val &= ~(1 << cx->card->xceive_pin);
+ cx->gpio_val &= ~(1 << cx->card->xceive_pin);
gpio_write(cx);
schedule_timeout_interruptible(msecs_to_jiffies(1));
- gpio_val |= 1 << cx->card->xceive_pin;
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
gpio_write(cx);
schedule_timeout_interruptible(msecs_to_jiffies(1));
return 0;
};
/* This array should match the CX18_HW_ defines */
-static const char * const hw_drivernames[] = {
+static const char * const hw_devicenames[] = {
"tuner",
"tveeprom",
"cs5345",
id = hw_driverids[idx];
bus = hw_bus[idx];
memset(&info, 0, sizeof(info));
- strlcpy(info.driver_name, hw_drivernames[idx],
- sizeof(info.driver_name));
+ strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
info.addr = hw_addrs[idx];
for (i = 0; i < I2C_CLIENTS_MAX; i++)
if (cx->i2c_clients[i] == NULL)
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (hw_driverids[i] == id)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (1 << i == hw)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
if (!set_fmt || (cx->params.width == w && cx->params.height == h))
return 0;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
cx->params.width = w;
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI &&
cx->vbi.sliced_in->service_set &&
- atomic_read(&cx->capturing) > 0)
+ atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
if (set_fmt) {
cx->vbi.sliced_in->service_set = 0;
return 0;
if (set == 0)
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
+ if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
return -EBUSY;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
break;
if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ||
- atomic_read(&cx->capturing) > 0) {
+ atomic_read(&cx->ana_capturing) > 0) {
/* Switching standard would turn off the radio or mess
with already running streams, prevent that by
returning EBUSY. */
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
cx18_buf_sync_for_device(s, buf);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
1, buf->id, s->buf_size);
} else
set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
*/
if (sw2) {
- if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) |
+ readl(&cx->scb->cpu2epu_irq_ack)))
wake_up(&cx->mb_cpu_waitq);
- if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) |
+ readl(&cx->scb->apu2epu_irq_ack)))
wake_up(&cx->mb_apu_waitq);
- if (sw2 & cx->scb->epu2hpu_irq_ack)
+ if (sw2 & readl(&cx->scb->epu2hpu_irq_ack))
wake_up(&cx->mb_epu_waitq);
- if (sw2 & cx->scb->hpu2epu_irq_ack)
+ if (sw2 & readl(&cx->scb->hpu2epu_irq_ack))
wake_up(&cx->mb_hpu_waitq);
}
return NULL;
}
-static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu,
+static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu,
u32 *state, u32 *irq, u32 *req)
{
- struct cx18_mailbox *mb = NULL;
+ struct cx18_mailbox __iomem *mb = NULL;
int wait_count = 0;
u32 ack;
long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
{
const struct cx18_api_info *info = find_api_info(mb->cmd);
- struct cx18_mailbox *ack_mb;
+ struct cx18_mailbox __iomem *ack_mb;
u32 ack_irq;
u8 rpu = CPU;
{
const struct cx18_api_info *info = find_api_info(cmd);
u32 state = 0, irq = 0, req, oldreq, err;
- struct cx18_mailbox *mb;
+ struct cx18_mailbox __iomem *mb;
wait_queue_head_t *waitq;
int timeout = 100;
int cnt = 0;
#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
static struct file_operations cx18_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = cx18_v4l2_read,
- .open = cx18_v4l2_open,
- .ioctl = cx18_v4l2_ioctl,
- .release = cx18_v4l2_close,
- .poll = cx18_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = cx18_v4l2_read,
+ .open = cx18_v4l2_open,
+ .ioctl = cx18_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = cx18_v4l2_close,
+ .poll = cx18_v4l2_enc_poll,
};
/* offset from 0 to register ts v4l2 minors on */
s->handle = data[0];
cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
- if (atomic_read(&cx->capturing) == 0 && !ts) {
+ if (atomic_read(&cx->ana_capturing) == 0 && !ts) {
/* Stuff from Windows, we don't know what it is */
cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
cx2341x_update(cx, cx18_api_func, NULL, &cx->params);
}
- if (atomic_read(&cx->capturing) == 0) {
+ if (atomic_read(&cx->tot_capturing) == 0) {
clear_bit(CX18_F_I_EOS, &cx->i_flags);
write_reg(7, CX18_DSP0_INTERRUPT_MASK);
}
cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
- (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
- (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1,
- buf->id, s->buf_size);
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ 1, buf->id, s->buf_size);
}
/* begin_capture */
if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
}
/* you're live! sit back and await interrupts :) */
- atomic_inc(&cx->capturing);
+ if (!ts)
+ atomic_inc(&cx->ana_capturing);
+ atomic_inc(&cx->tot_capturing);
return 0;
}
CX18_DEBUG_INFO("Stop Capture\n");
- if (atomic_read(&cx->capturing) == 0)
+ if (atomic_read(&cx->tot_capturing) == 0)
return 0;
if (s->type == CX18_ENC_STREAM_TYPE_MPG)
CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
}
- atomic_dec(&cx->capturing);
+ if (s->type != CX18_ENC_STREAM_TYPE_TS)
+ atomic_dec(&cx->ana_capturing);
+ atomic_dec(&cx->tot_capturing);
/* Clear capture and no-read bits */
clear_bit(CX18_F_S_STREAMING, &s->s_flags);
cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
s->handle = 0xffffffff;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
return 0;
write_reg(5, CX18_DSP0_INTERRUPT_MASK);
iounmap(dev->lmmio);
}
-static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines)
unsigned int padding, unsigned int lines)
{
u32 instructions, fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
unsigned int lines)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
return 0;
}
+static const struct i2c_device_id cx25840_id[] = {
+ { "cx25840", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cx25840_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cx25840",
.driverid = I2C_DRIVERID_CX25840,
.command = cx25840_command,
.probe = cx25840_probe,
.remove = cx25840_remove,
+ .id_table = cx25840_id,
};
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
- .name = "PowerColor Real Angel 330",
+ .name = "PowerColor RA330", /* Long names may confuse LIRC. */
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.input = { {
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3, /* Due to the way the cx88 driver is written, */
+ .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
+ .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
+ .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
+ }, { /* from the tuner on boot for a little while. */
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00ff,
switch (core->boardnr) {
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
- /* Doesn't work with firmware version 2.7 */
- ctl->fname = "xc3028-v25.fw";
+ /* Now works with firmware version 2.7 */
+ if (core->i2c_algo.udelay < 16)
+ core->i2c_algo.udelay = 16;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
ctl->scode_table = XC3028_FE_ZARLINK456;
/* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
generated _after_ lpi lines are transferred. */
-static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines, unsigned int lpi)
unsigned int bpl, unsigned int padding, unsigned int lines)
{
u32 instructions,fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
unsigned int lines, unsigned int lpi)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
reg->val = ret;
} else {
- u64 val = 0;
+ __le64 val = 0;
ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
reg->reg, (char *)&val, 2);
if (ret < 0)
return ret;
- reg->val = cpu_to_le64((__u64)val);
+ reg->val = le64_to_cpu(val);
}
return 0;
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- u64 buf;
+ __le64 buf;
- buf = le64_to_cpu((__u64)reg->val);
+ buf = cpu_to_le64(reg->val);
return em28xx_write_regs(dev, reg->reg, (char *)&buf,
em28xx_reg_len(reg->reg));
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
/* Scatter-Gather array element, used in DMA transfers */
struct ivtv_sg_element {
+ __le32 src;
+ __le32 dst;
+ __le32 size;
+};
+
+struct ivtv_sg_host_element {
u32 src;
u32 dst;
u32 size;
u16 dma_xfer_cnt;
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_sg_element *sg_pending;
- struct ivtv_sg_element *sg_processing;
+ struct ivtv_sg_host_element *sg_pending;
+ struct ivtv_sg_host_element *sg_processing;
struct ivtv_sg_element *sg_dma;
dma_addr_t sg_handle;
int sg_pending_size;
since we may get here before the stream has been fully set-up */
if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) {
while (count >= itv->dma_data_req_size) {
- if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) {
+ if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) {
bytes_written += itv->dma_data_req_size;
user_buf += itv->dma_data_req_size;
count -= itv->dma_data_req_size;
};
/* This array should match the IVTV_HW_ defines */
-static const char * const hw_drivernames[] = {
+static const char * const hw_devicenames[] = {
"cx25840",
"saa7115",
"saa7127",
"wm8775",
"cs53l32a",
"tveeprom",
- "saa7115",
+ "saa7114",
"upd64031a",
"upd64083",
"saa717x",
return -1;
id = hw_driverids[idx];
memset(&info, 0, sizeof(info));
- strlcpy(info.driver_name, hw_drivernames[idx],
- sizeof(info.driver_name));
+ strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
info.addr = hw_addrs[idx];
for (i = 0; itv->i2c_clients[i] && i < I2C_CLIENTS_MAX; i++) {}
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (hw_driverids[i] == id)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (1 << i == hw)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
* same size and GPIO must be the last entry.
*/
if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) ||
- ARRAY_SIZE(hw_drivernames) != ARRAY_SIZE(hw_addrs) ||
+ ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) ||
IVTV_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 1)) ||
hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) {
IVTV_ERR("Mismatched I2C hardware arrays\n");
struct ivtv_buffer *buf = NULL;
struct list_head *p;
u32 offset;
- u32 *u32buf;
+ __le32 *u32buf;
int x = 0;
IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA",
s->name, s->dma_offset);
list_for_each(p, &s->q_dma.list) {
buf = list_entry(p, struct ivtv_buffer, list);
- u32buf = (u32 *)buf->buf;
+ u32buf = (__le32 *)buf->buf;
/* Sync Buffer */
ivtv_buf_sync_for_cpu(s, buf);
}
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
if (s->q_predma.bytesused)
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
int ivtv_stream_alloc(struct ivtv_stream *s)
{
struct ivtv *itv = s->itv;
- int SGsize = sizeof(struct ivtv_sg_element) * s->buffers;
+ int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers;
int i;
if (s->buffers == 0)
#include "ivtv-streams.h"
static const struct file_operations ivtv_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_enc_poll,
};
static const struct file_operations ivtv_v4l2_dec_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_dec_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_dec_poll,
};
#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 2
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 1
+#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
}
/* Attempt to dma a frame from a user buffer */
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src)
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src)
{
struct yuv_playback_info *yi = &itv->yuv_info;
struct ivtv_dma_frame dma_args;
int ivtv_yuv_filter_check(struct ivtv *itv);
void ivtv_yuv_setup_stream_frame(struct ivtv *itv);
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src);
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src);
void ivtv_yuv_frame_complete(struct ivtv *itv);
int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args);
void ivtv_yuv_close(struct ivtv *itv);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "m52790");
-
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id m52790_id[] = {
+ { "m52790", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, m52790_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "m52790",
.driverid = I2C_DRIVERID_M52790,
.command = m52790_command,
.probe = m52790_probe,
.remove = m52790_remove,
+ .id_table = m52790_id,
};
int msp_product, msp_prod_hi, msp_prod_lo;
int msp_rom;
- snprintf(client->name, sizeof(client->name) - 1, "msp3400");
+ if (!id)
+ strlcpy(client->name, "msp3400", sizeof(client->name));
if (msp_reset(client) == -1) {
v4l_dbg(1, msp_debug, client, "msp3400 not found\n");
msp_revision = (state->rev1 & 0x0f) + '@';
msp_hard = ((state->rev1 >> 8) & 0xff) + '@';
msp_rom = state->rev2 & 0x1f;
- snprintf(client->name, sizeof(client->name), "MSP%d4%02d%c-%c%d",
- msp_family, msp_product,
- msp_revision, msp_hard, msp_rom);
/* Rev B=2, C=3, D=4, G=7 */
state->ident = msp_family * 10000 + 4000 + msp_product * 10 +
msp_revision - '@';
}
/* hello world :-) */
- v4l_info(client, "%s found @ 0x%x (%s)\n", client->name,
+ v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
+ msp_family, msp_product,
+ msp_revision, msp_hard, msp_rom,
client->addr << 1, client->adapter->name);
v4l_info(client, "%s ", client->name);
if (state->has_nicam && state->has_radio)
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id msp_id[] = {
+ { "msp3400", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, msp_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "msp3400",
.driverid = I2C_DRIVERID_MSP3400,
.remove = msp_remove,
.suspend = msp_suspend,
.resume = msp_resume,
+ .id_table = msp_id,
};
struct saa711x_state *state;
int i;
char name[17];
- u8 chip_id;
+ char chip_id;
+ int autodetect = !id || id->driver_data == 1;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa7115");
-
for (i = 0; i < 0x0f; i++) {
saa711x_write(client, 0, i);
name[i] = (saa711x_read(client, 0) & 0x0f) + '0';
}
name[i] = '\0';
- saa711x_write(client, 0, 5);
- chip_id = saa711x_read(client, 0) & 0x0f;
+ chip_id = name[5];
/* Check whether this chip is part of the saa711x series */
if (memcmp(name, "1f711", 5)) {
return -ENODEV;
}
- snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id);
- v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, client->addr << 1, client->adapter->name);
+ /* Safety check */
+ if (!autodetect && id->name[6] != chip_id) {
+ v4l_warn(client, "found saa711%c while %s was expected\n",
+ chip_id, id->name);
+ }
+ snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
+ v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
+ client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
i2c_set_clientdata(client, state);
state->hue = 0;
state->sat = 64;
switch (chip_id) {
- case 1:
+ case '1':
state->ident = V4L2_IDENT_SAA7111;
break;
- case 3:
+ case '3':
state->ident = V4L2_IDENT_SAA7113;
break;
- case 4:
+ case '4':
state->ident = V4L2_IDENT_SAA7114;
break;
- case 5:
+ case '5':
state->ident = V4L2_IDENT_SAA7115;
break;
- case 8:
+ case '8':
state->ident = V4L2_IDENT_SAA7118;
break;
default:
return 0;
}
+static const struct i2c_device_id saa7115_id[] = {
+ { "saa711x", 1 }, /* autodetect */
+ { "saa7111", 0 },
+ { "saa7113", 0 },
+ { "saa7114", 0 },
+ { "saa7115", 0 },
+ { "saa7118", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa7115_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa7115",
.driverid = I2C_DRIVERID_SAA711X,
.probe = saa7115_probe,
.remove = saa7115_remove,
.legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+ .id_table = saa7115_id,
};
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa7127");
-
v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
client->addr << 1);
/* ----------------------------------------------------------------------- */
+static struct i2c_device_id saa7127_id[] = {
+ { "saa7127", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa7127_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa7127",
.driverid = I2C_DRIVERID_SAA7127,
.command = saa7127_command,
.probe = saa7127_probe,
.remove = saa7127_remove,
+ .id_table = saa7127_id,
};
static int empress_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
strcpy(cap->driver, "saa7134");
strlcpy(cap->card, saa7134_boards[dev->board].name,
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa717x");
-
if (saa717x_write(client, 0x5a4, 0xfe) &&
saa717x_write(client, 0x5a5, 0x0f) &&
saa717x_write(client, 0x5a6, 0x00) &&
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id saa717x_id[] = {
+ { "saa717x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa717x_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa717x",
.driverid = I2C_DRIVERID_SAA717X,
.probe = saa717x_probe,
.remove = saa717x_remove,
.legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+ .id_table = saa717x_id,
};
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
unsigned int type; /* chip type id */
unsigned int config;
int (*tuner_callback) (void *dev, int command, int arg);
+ const char *name;
};
/* standard i2c insmod options */
tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
tuner_warn("will soon be dropped. This message indicates that your\n");
tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
- t->i2c->name, t->i2c->addr);
+ t->name, t->i2c->addr);
tuner_warn("To ensure continued support for your device, please\n");
tuner_warn("send a copy of this message, along with full dmesg\n");
tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
- t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name);
+ t->i2c->adapter->name, t->i2c->addr, t->type, t->name);
tuner_warn("====================== WARNING! ======================\n");
}
if ((NULL == analog_ops->set_params) &&
(fe_tuner_ops->set_analog_params)) {
- strlcpy(t->i2c->name, fe_tuner_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = fe_tuner_ops->info.name;
t->fe.analog_demod_priv = t;
memcpy(analog_ops, &tuner_core_ops,
sizeof(struct analog_demod_ops));
} else {
- strlcpy(t->i2c->name, analog_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = analog_ops->info.name;
}
- tuner_dbg("type set to %s\n", t->i2c->name);
+ tuner_dbg("type set to %s\n", t->name);
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
static inline int check_mode(struct tuner *t, char *cmd)
{
if ((1 << t->mode & t->mode_mask) == 0) {
- return EINVAL;
+ return -EINVAL;
}
switch (t->mode) {
t->mode = mode;
- if (check_mode(t, cmd) == EINVAL) {
+ if (check_mode(t, cmd) == -EINVAL) {
t->mode = T_STANDBY;
if (analog_ops->standby)
analog_ops->standby(&t->fe);
- return EINVAL;
+ return -EINVAL;
}
return 0;
}
break;
case AUDC_SET_RADIO:
if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
- == EINVAL)
+ == -EINVAL)
return 0;
if (t->radio_freq)
set_freq(client, t->radio_freq);
break;
case TUNER_SET_STANDBY:
- if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
+ if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
break;
#ifdef CONFIG_VIDEO_ALLOW_V4L1
case VIDIOCSAUDIO:
- if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
/* Should be implemented, since bttv calls it */
};
struct video_channel *vc = arg;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
- if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL)
+ if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL)
return 0;
if (vc->norm < ARRAY_SIZE(map))
{
unsigned long *v = arg;
- if (check_mode(t, "VIDIOCSFREQ") == EINVAL)
+ if (check_mode(t, "VIDIOCSFREQ") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
set_freq(client, *v);
{
struct video_tuner *vt = arg;
- if (check_mode(t, "VIDIOCGTUNER") == EINVAL)
+ if (check_mode(t, "VIDIOCGTUNER") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
{
struct video_audio *va = arg;
- if (check_mode(t, "VIDIOCGAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
v4l2_std_id *id = arg;
if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
struct v4l2_frequency *f = arg;
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
set_freq(client,f->frequency);
{
struct v4l2_frequency *f = arg;
- if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL)
return 0;
switch_v4l2();
f->type = t->mode;
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL)
return 0;
switch_v4l2();
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL)
return 0;
switch_v4l2();
if (NULL == t)
return -ENOMEM;
t->i2c = client;
- strlcpy(client->name, "(tuner unset)", sizeof(client->name));
+ t->name = "(tuner unset)";
i2c_set_clientdata(client, t);
t->type = UNSET;
t->audmode = V4L2_TUNER_MODE_STEREO;
/* ----------------------------------------------------------------------- */
+/* This driver supports many devices and the idea is to let the driver
+ detect which device is present. So rather than listing all supported
+ devices here, we pretend to support a single, fake device type. */
+static const struct i2c_device_id tuner_id[] = {
+ { "tuner", }, /* autodetect */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tuner_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tuner",
.driverid = I2C_DRIVERID_TUNER,
.suspend = tuner_suspend,
.resume = tuner_resume,
.legacy_probe = tuner_legacy_probe,
+ .id_table = tuner_id,
};
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id upd64031a_id[] = {
+ { "upd64031a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, upd64031a_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "upd64031a",
.command = upd64031a_command,
.probe = upd64031a_probe,
.remove = upd64031a_remove,
+ .id_table = upd64031a_id,
};
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id upd64083_id[] = {
+ { "upd64083", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, upd64083_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "upd64083",
.command = upd64083_command,
.probe = upd64083_probe,
.remove = upd64083_remove,
+ .id_table = upd64083_id,
};
return ret;
}
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val)
+static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
{
int ret;
}
/* Locking: Caller holds q->vb_lock */
-static int __videobuf_mmap_setup(struct videobuf_queue *q,
+int __videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory)
{
EXPORT_SYMBOL_GPL(videobuf_read_one);
EXPORT_SYMBOL_GPL(videobuf_poll_stream);
+EXPORT_SYMBOL_GPL(__videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_free);
EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "vp27smpx");
-
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id vp27smpx_id[] = {
+ { "vp27smpx", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, vp27smpx_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "vp27smpx",
.driverid = I2C_DRIVERID_VP27SMPX,
.command = vp27smpx_command,
.probe = vp27smpx_probe,
.remove = vp27smpx_remove,
+ .id_table = vp27smpx_id,
};
return 0;
}
+static const struct i2c_device_id wm8739_id[] = {
+ { "wm8739", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8739_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "wm8739",
.driverid = I2C_DRIVERID_WM8739,
.command = wm8739_command,
.probe = wm8739_probe,
.remove = wm8739_remove,
+ .id_table = wm8739_id,
};
return 0;
}
+static const struct i2c_device_id wm8775_id[] = {
+ { "wm8775", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8775_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "wm8775",
.driverid = I2C_DRIVERID_WM8775,
.command = wm8775_command,
.probe = wm8775_probe,
.remove = wm8775_remove,
+ .id_table = wm8775_id,
};
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
struct zoran_jpg_buffer {
struct zoran_mapping *map;
- u32 *frag_tab; /* addresses of frag table */
+ __le32 *frag_tab; /* addresses of frag table */
u32 frag_tab_bus; /* same value cached to save time in ISR */
enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */
struct zoran_sync bs; /* DONE: info to return to application */
unsigned long jpg_queued_num; /* count of frames queued since grab/play started */
/* zr36057's code buffer table */
- u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
+ __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
/* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
int jpg_pend[BUZ_MAX_FRAME];
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
-#include <linux/byteorder/generic.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/delay.h>
#include <linux/wait.h>
+#include <asm/byteorder.h>
#include <asm/io.h>
#include "videocodec.h"
if (i) {
/* Rotate stat_comm entries to make current entry first */
int j;
- u32 bus_addr[BUZ_NUM_STAT_COM];
+ __le32 bus_addr[BUZ_NUM_STAT_COM];
/* Here we are copying the stat_com array, which
* is already in little endian format, so
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
-#include <linux/byteorder/generic.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <media/v4l2-common.h>
#include "videocodec.h"
+#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/proc_fs.h>
jpg_fbuffer_free(file);
return -ENOBUFS;
}
- fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem;
+ fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem;
fh->jpg_buffers.buffer[i].frag_tab_bus =
virt_to_bus((void *) mem);
/* v4l capture */
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
/* unload capture */
if (zr->v4l_memgrab_active) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
mutex_lock(&zr->resource_lock);
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
if (todo > fraglen)
todo = fraglen;
pos =
- le32_to_cpu((unsigned long) fh->jpg_buffers.
+ le32_to_cpu(fh->jpg_buffers.
buffer[i].frag_tab[2 * j]);
/* should just be pos on i386 */
page = virt_to_phys(bus_to_virt(pos))
sh->max_id = ioc->pfacts->MaxDevices;
sh->max_lun = max_lun;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
sh->transportt = mptsas_transport_template;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
ioc->name, sdev->sdtr, sdev->wdtr,
sdev->ppr, sdev->inquiry_len));
- if (sdev->id > sh->max_id) {
- /* error case, should never happen */
- scsi_adjust_queue_depth(sdev, 0, 1);
- goto slave_configure_exit;
- }
-
vdevice->configured_lun = 1;
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
-slave_configure_exit:
-
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB
+ depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
MODULE_DESCRIPTION("Fujitsu laptop extras support");
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+static struct pnp_device_id pnp_ids[] = {
+ { .id = "FUJ02bf" },
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_ids);
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
#define v1printk(a...) do { \
if (verbose) \
} while (0)
#define MAX_CONFIG_LEN 40
-static const char hexchars[] = "0123456789abcdef";
static struct kgdb_io kgdbts_io_ops;
static char get_buf[BUFMAX];
static int get_buf_cnt;
static int test_complete;
static int send_ack;
static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
static int hw_break_val;
static int hw_break_val2;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
static void sw_break(char *arg)
{
- break_helper("Z0", arg, 0);
+ break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
}
static void sw_rem_break(char *arg)
{
- break_helper("z0", arg, 0);
+ break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
}
static void hw_break(char *arg)
count++;
}
strcat(get_buf, "#");
- get_buf[count + 2] = hexchars[checksum >> 4];
- get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 2] = hex_asc_hi(checksum);
+ get_buf[count + 3] = hex_asc_lo(checksum);
get_buf[count + 4] = '\0';
v2printk("get%i: %s\n", ts.idx, get_buf);
}
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ if (is_hw_breakpoint)
+ hwbreaks_ok = 0;
}
static void run_hw_break_test(int is_write_test)
kgdb_breakpoint();
hw_break_val_access();
if (is_write_test) {
- if (test_complete == 2)
+ if (test_complete == 2) {
eprintk("kgdbts: ERROR %s broke on access\n",
ts.name);
+ hwbreaks_ok = 0;
+ }
hw_break_val_write();
}
kgdb_breakpoint();
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ hwbreaks_ok = 0;
}
static void run_nmi_sleep_test(int nmi_sleep)
/* All HW break point tests */
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ hwbreaks_ok = 1;
v1printk("kgdbts:RUN hw breakpoint test\n");
run_breakpoint_test(1);
v1printk("kgdbts:RUN hw write breakpoint test\n");
run_nmi_sleep_test(nmi_sleep);
}
+#ifdef CONFIG_DEBUG_RODATA
+ /* Until there is an api to write to read-only text segments, use
+ * HW breakpoints for the remainder of any tests, else print a
+ * failure message if hw breakpoints do not work.
+ */
+ if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+ eprintk("kgdbts: HW breakpoints do not work,"
+ "skipping remaining tests\n");
+ return;
+ }
+ force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
#define TPACPI_LED_NUMLEDS 8
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
-static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
/* there's a limit of 19 chars + NULL before 2.6.26 */
"tpacpi::power",
"tpacpi:orange:batt",
static int led_set_status(unsigned int led, enum led_status_t ledstatus)
{
/* off, on, blink. Index is led_status_t */
- static const int const led_sled_arg1[] = { 0, 1, 3 };
- static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
- static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
- static const int const led_led_arg1[] = { 0, 0x80, 0xc0 };
+ static const int led_sled_arg1[] = { 0, 1, 3 };
+ static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
+ static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
+ static const int led_led_arg1[] = { 0, 0x80, 0xc0 };
int rc = 0;
SDIO function driver for SDIO cards that implements the UART
class, as well as the GPS class which appears like a UART.
+config MMC_TEST
+ tristate "MMC host test driver"
+ default n
+ help
+ Development driver that performs a series of reads and writes
+ to a memory card in order to expose certain well known bugs
+ in host controllers. The tests are executed by writing to the
+ "test" file in sysfs under each card. Note that whatever is
+ on your card will be overwritten by these tests.
+
+ This driver is only of interest to those developing or
+ testing a host driver. Most people should say N here.
obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
mmc_block-objs := block.o queue.o
+obj-$(CONFIG_MMC_TEST) += mmc_test.o
obj-$(CONFIG_SDIO_UART) += sdio_uart.o
#define MMC_SHIFT 3
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS);
/*
* There is one mmc_blk_data per slot.
--- /dev/null
+/*
+ * linux/drivers/mmc/card/mmc_test.c
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include <linux/scatterlist.h>
+
+#define RESULT_OK 0
+#define RESULT_FAIL 1
+#define RESULT_UNSUP_HOST 2
+#define RESULT_UNSUP_CARD 3
+
+#define BUFFER_SIZE (PAGE_SIZE * 4)
+
+struct mmc_test_card {
+ struct mmc_card *card;
+
+ u8 *buffer;
+};
+
+/*******************************************************************/
+/* Helper functions */
+/*******************************************************************/
+
+static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size)
+{
+ struct mmc_command cmd;
+ int ret;
+
+ cmd.opcode = MMC_SET_BLOCKLEN;
+ cmd.arg = size;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ ret = mmc_wait_for_cmd(test->card->host, &cmd, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __mmc_test_transfer(struct mmc_test_card *test, int write,
+ unsigned broken_xfer, u8 *buffer, unsigned addr,
+ unsigned blocks, unsigned blksz)
+{
+ int ret, busy;
+
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_command stop;
+ struct mmc_data data;
+
+ struct scatterlist sg;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ if (broken_xfer) {
+ if (blocks > 1) {
+ cmd.opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ } else {
+ cmd.opcode = MMC_SEND_STATUS;
+ }
+ } else {
+ if (blocks > 1) {
+ cmd.opcode = write ?
+ MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
+ } else {
+ cmd.opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ }
+ }
+
+ if (broken_xfer && blocks == 1)
+ cmd.arg = test->card->rca << 16;
+ else
+ cmd.arg = addr;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ memset(&stop, 0, sizeof(struct mmc_command));
+
+ if (!broken_xfer && (blocks > 1)) {
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
+ mrq.stop = &stop;
+ }
+
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ data.blksz = blksz;
+ data.blocks = blocks;
+ data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, buffer, blocks * blksz);
+
+ mmc_set_data_timeout(&data, test->card);
+
+ mmc_wait_for_req(test->card->host, &mrq);
+
+ ret = 0;
+
+ if (broken_xfer) {
+ if (!ret && cmd.error)
+ ret = cmd.error;
+ if (!ret && data.error == 0)
+ ret = RESULT_FAIL;
+ if (!ret && data.error != -ETIMEDOUT)
+ ret = data.error;
+ if (!ret && stop.error)
+ ret = stop.error;
+ if (blocks > 1) {
+ if (!ret && data.bytes_xfered > blksz)
+ ret = RESULT_FAIL;
+ } else {
+ if (!ret && data.bytes_xfered > 0)
+ ret = RESULT_FAIL;
+ }
+ } else {
+ if (!ret && cmd.error)
+ ret = cmd.error;
+ if (!ret && data.error)
+ ret = data.error;
+ if (!ret && stop.error)
+ ret = stop.error;
+ if (!ret && data.bytes_xfered != blocks * blksz)
+ ret = RESULT_FAIL;
+ }
+
+ if (ret == -EINVAL)
+ ret = RESULT_UNSUP_HOST;
+
+ busy = 0;
+ do {
+ int ret2;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = test->card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ ret2 = mmc_wait_for_cmd(test->card->host, &cmd, 0);
+ if (ret2)
+ break;
+
+ if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) {
+ busy = 1;
+ printk(KERN_INFO "%s: Warning: Host did not "
+ "wait for busy state to end.\n",
+ mmc_hostname(test->card->host));
+ }
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA));
+
+ return ret;
+}
+
+static int mmc_test_transfer(struct mmc_test_card *test, int write,
+ u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+{
+ return __mmc_test_transfer(test, write, 0, buffer,
+ addr, blocks, blksz);
+}
+
+static int mmc_test_prepare_verify(struct mmc_test_card *test, int write)
+{
+ int ret, i;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ if (write)
+ memset(test->buffer, 0xDF, BUFFER_SIZE);
+ else {
+ for (i = 0;i < BUFFER_SIZE;i++)
+ test->buffer[i] = i;
+ }
+
+ for (i = 0;i < BUFFER_SIZE / 512;i++) {
+ ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
+ i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_prepare_verify_write(struct mmc_test_card *test)
+{
+ return mmc_test_prepare_verify(test, 1);
+}
+
+static int mmc_test_prepare_verify_read(struct mmc_test_card *test)
+{
+ return mmc_test_prepare_verify(test, 0);
+}
+
+static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
+ u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+{
+ int ret, i, sectors;
+
+ /*
+ * It is assumed that the above preparation has been done.
+ */
+
+ memset(test->buffer, 0, BUFFER_SIZE);
+
+ if (write) {
+ for (i = 0;i < blocks * blksz;i++)
+ buffer[i] = i;
+ }
+
+ ret = mmc_test_set_blksize(test, blksz);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, write, buffer, addr, blocks, blksz);
+ if (ret)
+ return ret;
+
+ if (write) {
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ sectors = (blocks * blksz + 511) / 512;
+ if ((sectors * 512) == (blocks * blksz))
+ sectors++;
+
+ if ((sectors * 512) > BUFFER_SIZE)
+ return -EINVAL;
+
+ memset(test->buffer, 0, sectors * 512);
+
+ for (i = 0;i < sectors;i++) {
+ ret = mmc_test_transfer(test, 0,
+ test->buffer + i * 512,
+ addr + i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0;i < blocks * blksz;i++) {
+ if (test->buffer[i] != (u8)i)
+ return RESULT_FAIL;
+ }
+
+ for (;i < sectors * 512;i++) {
+ if (test->buffer[i] != 0xDF)
+ return RESULT_FAIL;
+ }
+ } else {
+ for (i = 0;i < blocks * blksz;i++) {
+ if (buffer[i] != (u8)i)
+ return RESULT_FAIL;
+ }
+ }
+
+ return 0;
+}
+
+static int mmc_test_cleanup_verify(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ memset(test->buffer, 0, BUFFER_SIZE);
+
+ for (i = 0;i < BUFFER_SIZE / 512;i++) {
+ ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
+ i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*******************************************************************/
+/* Tests */
+/*******************************************************************/
+
+struct mmc_test_case {
+ const char *name;
+
+ int (*prepare)(struct mmc_test_card *);
+ int (*run)(struct mmc_test_card *);
+ int (*cleanup)(struct mmc_test_card *);
+};
+
+static int mmc_test_basic_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_basic_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, 0, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_verify_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_verify_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_write(struct mmc_test_card *test)
+{
+ int ret;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_verified_transfer(test, 1, test->buffer, 0,
+ size / 512, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_read(struct mmc_test_card *test)
+{
+ int ret;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_verified_transfer(test, 0, test->buffer, 0,
+ size / 512, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_pow2_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.write_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 1; i < 512;i <<= 1) {
+ ret = mmc_test_verified_transfer(test, 1,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_pow2_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.read_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 1; i < 512;i <<= 1) {
+ ret = mmc_test_verified_transfer(test, 0,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_weird_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.write_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 3; i < 512;i += 7) {
+ ret = mmc_test_verified_transfer(test, 1,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_weird_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.read_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 3; i < 512;i += 7) {
+ ret = mmc_test_verified_transfer(test, 0,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
+ 0, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
+ 0, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_multi_write(struct mmc_test_card *test)
+{
+ int ret, i;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
+ 0, size / 512, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_multi_read(struct mmc_test_card *test)
+{
+ int ret, i;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
+ 0, size / 512, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_xfersize_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_xfersize_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_xfersize_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 2, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 2, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct mmc_test_case mmc_test_cases[] = {
+ {
+ .name = "Basic write (no data verification)",
+ .run = mmc_test_basic_write,
+ },
+
+ {
+ .name = "Basic read (no data verification)",
+ .run = mmc_test_basic_read,
+ },
+
+ {
+ .name = "Basic write (with data verification)",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_verify_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Basic read (with data verification)",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_verify_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Multi-block write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_multi_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Multi-block read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_multi_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Power of two block writes",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_pow2_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Power of two block reads",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_pow2_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Weird sized block writes",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_weird_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Weird sized block reads",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_weird_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_align_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_align_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned multi-block write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_align_multi_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned multi-block read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_align_multi_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Correct xfer_size at write (start failure)",
+ .run = mmc_test_xfersize_write,
+ },
+
+ {
+ .name = "Correct xfer_size at read (start failure)",
+ .run = mmc_test_xfersize_read,
+ },
+
+ {
+ .name = "Correct xfer_size at write (midway failure)",
+ .run = mmc_test_multi_xfersize_write,
+ },
+
+ {
+ .name = "Correct xfer_size at read (midway failure)",
+ .run = mmc_test_multi_xfersize_read,
+ },
+};
+
+static struct mutex mmc_test_lock;
+
+static void mmc_test_run(struct mmc_test_card *test)
+{
+ int i, ret;
+
+ printk(KERN_INFO "%s: Starting tests of card %s...\n",
+ mmc_hostname(test->card->host), mmc_card_id(test->card));
+
+ mmc_claim_host(test->card->host);
+
+ for (i = 0;i < ARRAY_SIZE(mmc_test_cases);i++) {
+ printk(KERN_INFO "%s: Test case %d. %s...\n",
+ mmc_hostname(test->card->host), i + 1,
+ mmc_test_cases[i].name);
+
+ if (mmc_test_cases[i].prepare) {
+ ret = mmc_test_cases[i].prepare(test);
+ if (ret) {
+ printk(KERN_INFO "%s: Result: Prepare "
+ "stage failed! (%d)\n",
+ mmc_hostname(test->card->host),
+ ret);
+ continue;
+ }
+ }
+
+ ret = mmc_test_cases[i].run(test);
+ switch (ret) {
+ case RESULT_OK:
+ printk(KERN_INFO "%s: Result: OK\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_FAIL:
+ printk(KERN_INFO "%s: Result: FAILED\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_UNSUP_HOST:
+ printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ "(by host)\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_UNSUP_CARD:
+ printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ "(by card)\n",
+ mmc_hostname(test->card->host));
+ break;
+ default:
+ printk(KERN_INFO "%s: Result: ERROR (%d)\n",
+ mmc_hostname(test->card->host), ret);
+ }
+
+ if (mmc_test_cases[i].cleanup) {
+ ret = mmc_test_cases[i].cleanup(test);
+ if (ret) {
+ printk(KERN_INFO "%s: Warning: Cleanup "
+ "stage failed! (%d)\n",
+ mmc_hostname(test->card->host),
+ ret);
+ }
+ }
+ }
+
+ mmc_release_host(test->card->host);
+
+ printk(KERN_INFO "%s: Tests completed.\n",
+ mmc_hostname(test->card->host));
+}
+
+static ssize_t mmc_test_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ mutex_lock(&mmc_test_lock);
+ mutex_unlock(&mmc_test_lock);
+
+ return 0;
+}
+
+static ssize_t mmc_test_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mmc_card *card;
+ struct mmc_test_card *test;
+
+ card = container_of(dev, struct mmc_card, dev);
+
+ test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL);
+ if (!test)
+ return -ENOMEM;
+
+ test->card = card;
+
+ test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL);
+ if (test->buffer) {
+ mutex_lock(&mmc_test_lock);
+ mmc_test_run(test);
+ mutex_unlock(&mmc_test_lock);
+ }
+
+ kfree(test->buffer);
+ kfree(test);
+
+ return count;
+}
+
+static DEVICE_ATTR(test, S_IWUSR | S_IRUGO, mmc_test_show, mmc_test_store);
+
+static int mmc_test_probe(struct mmc_card *card)
+{
+ int ret;
+
+ mutex_init(&mmc_test_lock);
+
+ ret = device_create_file(&card->dev, &dev_attr_test);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void mmc_test_remove(struct mmc_card *card)
+{
+ device_remove_file(&card->dev, &dev_attr_test);
+}
+
+static struct mmc_driver mmc_driver = {
+ .drv = {
+ .name = "mmc_test",
+ },
+ .probe = mmc_test_probe,
+ .remove = mmc_test_remove,
+};
+
+static int __init mmc_test_init(void)
+{
+ return mmc_register_driver(&mmc_driver);
+}
+
+static void __exit mmc_test_exit(void)
+{
+ mmc_unregister_driver(&mmc_driver);
+}
+
+module_init(mmc_test_init);
+module_exit(mmc_test_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Multimedia Card (MMC) host test driver");
+MODULE_AUTHOR("Pierre Ossman");
config MMC_SPI
tristate "MMC/SD over SPI"
- depends on MMC && SPI_MASTER && !HIGHMEM
+ depends on MMC && SPI_MASTER && !HIGHMEM && HAS_DMA
select CRC7
select CRC_ITU_T
help
gpio_set_value(host->board->vcc_pin, 0);
break;
case MMC_POWER_UP:
- case MMC_POWER_ON:
gpio_set_value(host->board->vcc_pin, 1);
break;
+ case MMC_POWER_ON:
+ break;
+ default:
+ WARN_ON(1);
}
}
}
static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data)
{
- const char *dev_name;
+ const char *dma_dev_name;
int sync_dev, dma_ch, is_read, r;
is_read = !(data->flags & MMC_DATA_WRITE);
if (is_read) {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_RX;
- dev_name = "MMC1 read";
+ dma_dev_name = "MMC1 read";
} else {
sync_dev = OMAP_DMA_MMC2_RX;
- dev_name = "MMC2 read";
+ dma_dev_name = "MMC2 read";
}
} else {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_TX;
- dev_name = "MMC1 write";
+ dma_dev_name = "MMC1 write";
} else {
sync_dev = OMAP_DMA_MMC2_TX;
- dev_name = "MMC2 write";
+ dma_dev_name = "MMC2 write";
}
}
- r = omap_request_dma(sync_dev, dev_name, mmc_omap_dma_cb,
+ r = omap_request_dma(sync_dev, dma_dev_name, mmc_omap_dma_cb,
host, &dma_ch);
if (r != 0) {
dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r);
mutex_lock(&flash->lock);
/* Wait until finished previous write command. */
- if (wait_till_ready(flash))
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
return 1;
+ }
write_enable(flash);
}
static struct pci_device_id ck804xrom_pci_tbl[] = {
- { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 },
- { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 },
{ 0, }
};
err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
clk_enable(info->clk);
- return pxa3xx_nand_config_flash(info);
+ return pxa3xx_nand_config_flash(info, info->flash_info);
}
#else
#define pxa3xx_nand_suspend NULL
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(&info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
module_exit(redboot_parser_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables");
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
int err;
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
u_char pos4, pos5;
struct mca_device *mdev = to_mca_device(device);
printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
- for (i = 0; i < 3; i++) {
- phys_addr[i] = htons(read_eeprom(ioaddr, i));
- }
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
dev = alloc_etherdev(sizeof (struct el3_private));
if (dev == NULL) {
- release_region(ioaddr, EL3_IO_EXTENT);
- return -ENOMEM;
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
}
netdev_boot_setup_check(dev);
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
struct eisa_device *edev;
int err;
struct sk_buff *skb;
skb = dev_alloc_skb(pkt_len+5);
- dev->stats.rx_bytes += pkt_len;
if (el3_debug > 4)
printk("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
skb->protocol = eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_len;
dev->stats.rx_packets++;
continue;
}
memcpy(eth_addr, (void *) 0xfffc1f2c, 6); /* YUCK! Get addr from NOVRAM */
dev->base_addr = MVME_I596_BASE;
dev->irq = (unsigned) MVME16x_IRQ_I596;
+ goto found;
}
#endif
#ifdef ENABLE_BVME6000_NET
rtc[3] = msr;
dev->base_addr = BVME_I596_BASE;
dev->irq = (unsigned) BVME_IRQ_I596;
+ goto found;
}
#endif
#ifdef ENABLE_APRICOT
}
dev->irq = 10;
+ goto found;
}
#endif
+ err = -ENODEV;
+ goto out;
+
+found:
dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
if (!dev->mem_start) {
err = -ENOMEM;
config B44
tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE
+ depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
help
config EHEA
tristate "eHEA Ethernet support"
- depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG
+ depends on IBMEBUS && INET && SPARSEMEM
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
#endif
int err;
+ if (!MACH_IS_AMIGA)
+ return ERR_PTR(-ENODEV);
+
if (apne_owned)
return ERR_PTR(-ENODEV);
/* Good Receive */
pci_unmap_page(adapter->pdev, buffer_info->dma,
buffer_info->length, PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
return -1;
}
- if (skb->protocol == ntohs(ETH_P_IP)) {
+ if (skb->protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
real_len = (((unsigned char *)iph - skb->data) +
*/
static irqreturn_t au1000_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
-
- if (dev == NULL) {
- printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
- return IRQ_RETVAL(1);
- }
+ struct net_device *dev = dev_id;
/* Handle RX interrupts first to minimize chance of overrun */
#include <linux/crc32.h>
#include <linux/device.h>
#include <linux/spinlock.h>
-#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
* configure multiple bonding devices.
*/
if (ret == -EEXIST) {
- netdev_class = NULL;
- return 0;
+ /* Is someone being kinky and naming a device bonding_master? */
+ if (__dev_get_by_name(&init_net,
+ class_attr_bonding_masters.attr.name))
+ printk(KERN_ERR
+ "network device named %s already exists in sysfs",
+ class_attr_bonding_masters.attr.name);
+ else {
+ netdev_class = NULL;
+ return 0;
+ }
}
return ret;
#define DRV_MODULE_NAME "cassini"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5"
-#define DRV_MODULE_RELDATE "4 Jan 2008"
+#define DRV_MODULE_VERSION "1.6"
+#define DRV_MODULE_RELDATE "21 May 2008"
#define CAS_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
if (addr)
cas_page_unmap(addr);
}
- skb->csum = csum_unfold(~csum);
- skb->ip_summed = CHECKSUM_COMPLETE;
skb->protocol = eth_type_trans(skb, cp->dev);
+ if (skb->protocol == htons(ETH_P_IP)) {
+ skb->csum = csum_unfold(~csum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
return len;
}
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/gpio.h>
+#include <asm/atomic.h>
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
#define CPMAC_EOQ 0x1000
struct sk_buff *skb;
struct cpmac_desc *next;
+ struct cpmac_desc *prev;
dma_addr_t mapping;
dma_addr_t data_mapping;
};
struct work_struct reset_work;
struct platform_device *pdev;
struct napi_struct napi;
+ atomic_t reset_pending;
};
static irqreturn_t cpmac_irq(int, void *);
printk("\n");
}
+static void cpmac_dump_all_desc(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ struct cpmac_desc *dump = priv->rx_head;
+ do {
+ cpmac_dump_desc(dev, dump);
+ dump = dump->next;
+ } while (dump != priv->rx_head);
+}
+
static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
{
int i;
static int cpmac_poll(struct napi_struct *napi, int budget)
{
struct sk_buff *skb;
- struct cpmac_desc *desc;
- int received = 0;
+ struct cpmac_desc *desc, *restart;
struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
+ int received = 0, processed = 0;
spin_lock(&priv->rx_lock);
if (unlikely(!priv->rx_head)) {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: rx: polling, but no queue\n",
priv->dev->name);
+ spin_unlock(&priv->rx_lock);
netif_rx_complete(priv->dev, napi);
return 0;
}
desc = priv->rx_head;
+ restart = NULL;
while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
+ processed++;
+
+ if ((desc->dataflags & CPMAC_EOQ) != 0) {
+ /* The last update to eoq->hw_next didn't happen
+ * soon enough, and the receiver stopped here.
+ *Remember this descriptor so we can restart
+ * the receiver after freeing some space.
+ */
+ if (unlikely(restart)) {
+ if (netif_msg_rx_err(priv))
+ printk(KERN_ERR "%s: poll found a"
+ " duplicate EOQ: %p and %p\n",
+ priv->dev->name, restart, desc);
+ goto fatal_error;
+ }
+
+ restart = desc->next;
+ }
+
skb = cpmac_rx_one(priv, desc);
if (likely(skb)) {
netif_receive_skb(skb);
desc = desc->next;
}
+ if (desc != priv->rx_head) {
+ /* We freed some buffers, but not the whole ring,
+ * add what we did free to the rx list */
+ desc->prev->hw_next = (u32)0;
+ priv->rx_head->prev->hw_next = priv->rx_head->mapping;
+ }
+
+ /* Optimization: If we did not actually process an EOQ (perhaps because
+ * of quota limits), check to see if the tail of the queue has EOQ set.
+ * We should immediately restart in that case so that the receiver can
+ * restart and run in parallel with more packet processing.
+ * This lets us handle slightly larger bursts before running
+ * out of ring space (assuming dev->weight < ring_size) */
+
+ if (!restart &&
+ (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ))
+ == CPMAC_EOQ &&
+ (priv->rx_head->dataflags & CPMAC_OWN) != 0) {
+ /* reset EOQ so the poll loop (above) doesn't try to
+ * restart this when it eventually gets to this descriptor.
+ */
+ priv->rx_head->prev->dataflags &= ~CPMAC_EOQ;
+ restart = priv->rx_head;
+ }
+
+ if (restart) {
+ priv->dev->stats.rx_errors++;
+ priv->dev->stats.rx_fifo_errors++;
+ if (netif_msg_rx_err(priv) && net_ratelimit())
+ printk(KERN_WARNING "%s: rx dma ring overrun\n",
+ priv->dev->name);
+
+ if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: cpmac_poll is trying to "
+ "restart rx from a descriptor that's "
+ "not free: %p\n",
+ priv->dev->name, restart);
+ goto fatal_error;
+ }
+
+ cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping);
+ }
+
priv->rx_head = desc;
spin_unlock(&priv->rx_lock);
if (unlikely(netif_msg_rx_status(priv)))
printk(KERN_DEBUG "%s: poll processed %d packets\n",
priv->dev->name, received);
- if (desc->dataflags & CPMAC_OWN) {
+ if (processed == 0) {
+ /* we ran out of packets to read,
+ * revert to interrupt-driven mode */
netif_rx_complete(priv->dev, napi);
- cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
return 0;
}
return 1;
+
+fatal_error:
+ /* Something went horribly wrong.
+ * Reset hardware to try to recover rather than wedging. */
+
+ if (netif_msg_drv(priv)) {
+ printk(KERN_ERR "%s: cpmac_poll is confused. "
+ "Resetting hardware\n", priv->dev->name);
+ cpmac_dump_all_desc(priv->dev);
+ printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n",
+ priv->dev->name,
+ cpmac_read(priv->regs, CPMAC_RX_PTR(0)),
+ cpmac_read(priv->regs, CPMAC_RX_ACK(0)));
+ }
+
+ spin_unlock(&priv->rx_lock);
+ netif_rx_complete(priv->dev, napi);
+ netif_stop_queue(priv->dev);
+ napi_disable(&priv->napi);
+
+ atomic_inc(&priv->reset_pending);
+ cpmac_hw_stop(priv->dev);
+ if (!schedule_work(&priv->reset_work))
+ atomic_dec(&priv->reset_pending);
+ return 0;
+
}
static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
struct cpmac_desc *desc;
struct cpmac_priv *priv = netdev_priv(dev);
+ if (unlikely(atomic_read(&priv->reset_pending)))
+ return NETDEV_TX_BUSY;
+
if (unlikely(skb_padto(skb, ETH_ZLEN)))
return NETDEV_TX_OK;
desc->dataflags = CPMAC_OWN;
dev->stats.rx_dropped++;
}
+ desc->hw_next = desc->next->mapping;
desc = desc->next;
}
+ priv->rx_head->prev->hw_next = 0;
}
static void cpmac_clear_tx(struct net_device *dev)
priv->desc_ring[i].dataflags = 0;
if (priv->desc_ring[i].skb) {
dev_kfree_skb_any(priv->desc_ring[i].skb);
- if (netif_subqueue_stopped(dev, i))
- netif_wake_subqueue(dev, i);
+ priv->desc_ring[i].skb = NULL;
}
}
}
static void cpmac_hw_error(struct work_struct *work)
{
+ int i;
struct cpmac_priv *priv =
container_of(work, struct cpmac_priv, reset_work);
spin_unlock(&priv->rx_lock);
cpmac_clear_tx(priv->dev);
cpmac_hw_start(priv->dev);
- napi_enable(&priv->napi);
- netif_start_queue(priv->dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ for (i = 0; i < CPMAC_QUEUES; i++)
+ netif_wake_subqueue(priv->dev, i);
+ netif_wake_queue(priv->dev);
+ cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3);
+}
+
+static void cpmac_check_status(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS);
+ int rx_channel = (macstatus >> 8) & 7;
+ int rx_code = (macstatus >> 12) & 15;
+ int tx_channel = (macstatus >> 16) & 7;
+ int tx_code = (macstatus >> 20) & 15;
+
+ if (rx_code || tx_code) {
+ if (netif_msg_drv(priv) && net_ratelimit()) {
+ /* Can't find any documentation on what these
+ *error codes actually are. So just log them and hope..
+ */
+ if (rx_code)
+ printk(KERN_WARNING "%s: host error %d on rx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, rx_code, rx_channel, macstatus);
+ if (tx_code)
+ printk(KERN_WARNING "%s: host error %d on tx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, tx_code, tx_channel, macstatus);
+ }
+
+ netif_stop_queue(dev);
+ cpmac_hw_stop(dev);
+ if (schedule_work(&priv->reset_work))
+ atomic_inc(&priv->reset_pending);
+ if (unlikely(netif_msg_hw(priv)))
+ cpmac_dump_regs(dev);
+ }
+ cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff);
}
static irqreturn_t cpmac_irq(int irq, void *dev_id)
cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
- if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) {
- if (netif_msg_drv(priv) && net_ratelimit())
- printk(KERN_ERR "%s: hw error, resetting...\n",
- dev->name);
- netif_stop_queue(dev);
- napi_disable(&priv->napi);
- cpmac_hw_stop(dev);
- schedule_work(&priv->reset_work);
- if (unlikely(netif_msg_hw(priv)))
- cpmac_dump_regs(dev);
- }
+ if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS)))
+ cpmac_check_status(dev);
return IRQ_HANDLED;
}
static void cpmac_tx_timeout(struct net_device *dev)
{
- struct cpmac_priv *priv = netdev_priv(dev);
int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
spin_lock(&priv->lock);
dev->stats.tx_errors++;
spin_unlock(&priv->lock);
if (netif_msg_tx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: transmit timeout\n", dev->name);
- /*
- * FIXME: waking up random queue is not the best thing to
- * do... on the other hand why we got here at all?
- */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+
+ atomic_inc(&priv->reset_pending);
+ barrier();
+ cpmac_clear_tx(dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ netif_wake_queue(priv->dev);
for (i = 0; i < CPMAC_QUEUES; i++)
- if (priv->desc_ring[i].skb) {
- priv->desc_ring[i].dataflags = 0;
- dev_kfree_skb_any(priv->desc_ring[i].skb);
- netif_wake_subqueue(dev, i);
- break;
- }
-#else
- priv->desc_ring[0].dataflags = 0;
- if (priv->desc_ring[0].skb)
- dev_kfree_skb_any(priv->desc_ring[0].skb);
- netif_wake_queue(dev);
-#endif
+ netif_wake_subqueue(dev, i);
}
static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
desc->buflen = CPMAC_SKB_SIZE;
desc->dataflags = CPMAC_OWN;
desc->next = &priv->rx_head[(i + 1) % priv->ring_size];
+ desc->next->prev = desc;
desc->hw_next = (u32)desc->next->mapping;
}
+ priv->rx_head->prev->hw_next = (u32)0;
+
if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED,
dev->name, dev))) {
if (netif_msg_drv(priv))
goto fail_irq;
}
+ atomic_set(&priv->reset_pending, 0);
INIT_WORK(&priv->reset_work, cpmac_hw_error);
cpmac_hw_start(dev);
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch) {
- struct fixed_phy_status status = {};
-
- /*
- * FIXME: this should be in the platform code!
- * Since there is not platform code at all (that is,
- * no mainline users of that driver), place it here
- * for now.
- */
- phy_id = 0;
- status.link = 1;
- status.duplex = 1;
- status.speed = 100;
- fixed_phy_add(PHY_POLL, phy_id, &status);
+ mdio_bus_id = 0; /* fixed phys bus */
+ phy_id = pdev->id;
} else {
- printk(KERN_ERR "cpmac: no PHY present\n");
+ dev_err(&pdev->dev, "no PHY present\n");
return -ENODEV;
}
}
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-
- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
+ priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
+ &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not attach to PHY\n",
#endif
if (!result) {
printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
- release_irq:
+release_dma:
+#if ALLOW_DMA
+ free_dma(dev->dma);
+#endif
+release_irq:
#if ALLOW_DMA
release_dma_buff(lp);
#endif
if ((result = detect_bnc(dev)) != DETECTED_NONE)
break;
printk(KERN_ERR "%s: no media detected\n", dev->name);
- goto release_irq;
+ goto release_dma;
}
switch(result) {
case DETECTED_NONE:
printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
- goto release_irq;
+ goto release_dma;
case DETECTED_RJ45H:
printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
break;
if (netif_msg_ifdown(db))
dev_dbg(db->dev, "shutting down %s\n", ndev->name);
- cancel_delayed_work(&db->phy_poll);
+ cancel_delayed_work_sync(&db->phy_poll);
netif_stop_queue(ndev);
netif_carrier_off(ndev);
struct e1000_adapter *adapter;
struct e1000_hw *hw;
const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
- unsigned long mmio_start, mmio_len;
- unsigned long flash_start, flash_len;
+ resource_size_t mmio_start, mmio_len;
+ resource_size_t flash_start, flash_len;
static int cards_found;
int i, err, pci_using_dac;
goto out;
}
- memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter));
-
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
static void ehea_shutdown_single_port(struct ehea_port *port)
{
+ struct ehea_adapter *adapter = port->adapter;
unregister_netdev(port->netdev);
ehea_unregister_port(port);
kfree(port->mc_list);
free_netdev(port->netdev);
- port->adapter->active_ports--;
+ adapter->active_ports--;
}
static int ehea_setup_ports(struct ehea_adapter *adapter)
writel(txreg, base + NvRegTransmitPoll);
rc = nv_open(dev);
+ nv_set_multicast(dev);
out:
return rc;
}
if (registered)
unregister_netdev(ndev);
- if (fep != NULL) {
+ if (fep && fep->ops) {
(*fep->ops->free_bd)(ndev);
(*fep->ops->cleanup_data)(ndev);
}
case PARAM_RTS:
if ( !(scc->wreg[R5] & RTS) )
{
- if (arg != TX_OFF)
+ if (arg != TX_OFF) {
scc_key_trx(scc, TX_ON);
scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+ }
} else {
if (arg == TX_OFF)
{
}
}
- if (self->usbdev->descriptor.bcdDevice == fw_version) {
+ if (self->usbdev->descriptor.bcdDevice == cpu_to_le16(fw_version)) {
/*
* If we're here, we've found a correct patch
* The actual image starts after the "STMP" keyword
struct irda_class_desc {
__u8 bLength;
__u8 bDescriptorType;
- __u16 bcdSpecRevision;
+ __le16 bcdSpecRevision;
__u8 bmDataSize;
__u8 bmWindowSize;
__u8 bmMinTurnaroundTime;
- __u16 wBaudRate;
+ __le16 wBaudRate;
__u8 bmAdditionalBOFs;
__u8 bIrdaRateSniff;
__u8 bMaxUnicastList;
int err = -ENODEV;
DECLARE_MAC_BUF(mac);
+ if (!MACH_IS_MAC)
+ return ERR_PTR(-ENODEV);
+
dev = alloc_etherdev(sizeof(struct net_local));
if (!dev)
return ERR_PTR(-ENOMEM);
{
int err;
+ if (!MACH_IS_MAC)
+ return -ENODEV;
+
if ((err = platform_driver_register(&mac_mace_driver))) {
printk(KERN_ERR "Driver registration failed\n");
return err;
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.3.2-1.287"
+#define MYRI10GE_VERSION_STR "1.3.99-1.347"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
return status;
}
-int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
+static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
{
struct myri10ge_cmd cmd;
int status;
cardtype = CONTEC;
break;
case MANFID_FUJITSU:
- if (link->card_id == PRODID_FUJITSU_MBH10302)
+ if (link->conf.ConfigBase == 0x0fe0)
+ cardtype = MBH10302;
+ else if (link->card_id == PRODID_FUJITSU_MBH10302)
/* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
but these are MBH10304 based card. */
cardtype = MBH10304;
set_multicast_list(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
+ unsigned value;
SelectPage(0x42);
+ value = GetByte(XIRCREG42_SWC1) & 0xC0;
+
if (dev->flags & IFF_PROMISC) { /* snoop */
- PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
+ PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
} else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
- PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
+ PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
} else if (dev->mc_count) {
/* the chip can filter 9 addresses perfectly */
- PutByte(XIRCREG42_SWC1, 0x01);
+ PutByte(XIRCREG42_SWC1, value | 0x01);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, Offline);
set_addresses(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
} else { /* standard usage */
- PutByte(XIRCREG42_SWC1, 0x00);
+ PutByte(XIRCREG42_SWC1, value | 0x00);
}
SelectPage(0);
}
/* enable receiver and put the mac online */
if (full) {
+ set_multicast_list(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
}
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
-static int pcnet32_alloc_ring(struct net_device *dev, char *name);
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name);
static void pcnet32_free_ring(struct net_device *dev);
static void pcnet32_check_media(struct net_device *dev, int verbose);
}
/* if any allocation fails, caller must also call pcnet32_free_ring */
-static int pcnet32_alloc_ring(struct net_device *dev, char *name)
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
{
struct pcnet32_private *lp = netdev_priv(dev);
menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
depends on !S390
- depends on NET_ETHERNET && (BROKEN || !S390)
+ depends on NET_ETHERNET
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
return 0;
}
+EXPORT_SYMBOL(get_phy_id);
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device struct
if (sk == NULL)
return NULL;
+ sock_hold(sk);
session = (struct pppol2tp_session *)(sk->sk_user_data);
- if (session == NULL)
- return NULL;
+ if (session == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
-
+out:
return session;
}
if (sk == NULL)
return NULL;
+ sock_hold(sk);
tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
- if (tunnel == NULL)
- return NULL;
+ if (tunnel == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
-
+out:
return tunnel;
}
session->stats.rx_errors++;
kfree_skb(skb);
sock_put(session->sock);
+ sock_put(sock);
return 0;
error:
/* Put UDP header back */
__skb_push(skb, sizeof(struct udphdr));
+ sock_put(sock);
no_tunnel:
return 1;
"%s: received %d bytes\n", tunnel->name, skb->len);
if (pppol2tp_recv_core(sk, skb))
- goto pass_up;
+ goto pass_up_put;
+ sock_put(sk);
return 0;
+pass_up_put:
+ sock_put(sk);
pass_up:
return 1;
}
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto error;
+ goto error_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
sizeof(ppph) + total_len,
0, GFP_KERNEL);
if (!skb)
- goto error;
+ goto error_put_sess_tun;
/* Reserve space for headers. */
skb_reserve(skb, NET_SKB_PAD);
error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
if (error < 0) {
kfree_skb(skb);
- goto error;
+ goto error_put_sess_tun;
}
skb_put(skb, total_len);
session->stats.tx_errors++;
}
+ return error;
+
+error_put_sess_tun:
+ sock_put(session->tunnel_sock);
+error_put_sess:
+ sock_put(sk);
error:
return error;
}
+/* Automatically called when the skb is freed.
+ */
+static void pppol2tp_sock_wfree(struct sk_buff *skb)
+{
+ sock_put(skb->sk);
+}
+
+/* For data skbs that we transmit, we associate with the tunnel socket
+ * but don't do accounting.
+ */
+static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ sock_hold(sk);
+ skb->sk = sk;
+ skb->destructor = pppol2tp_sock_wfree;
+}
+
/* Transmit function called by generic PPP driver. Sends PPP frame
* over PPPoL2TP socket.
*
__wsum csum = 0;
struct udphdr *uh;
unsigned int len;
+ int old_headroom;
+ int new_headroom;
if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
goto abort;
sk_tun = session->tunnel_sock;
if (sk_tun == NULL)
- goto abort;
+ goto abort_put_sess;
tunnel = pppol2tp_sock_to_tunnel(sk_tun);
if (tunnel == NULL)
- goto abort;
+ goto abort_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
/* Check that there's enough headroom in the skb to insert IP,
* UDP and L2TP and PPP headers. If not enough, expand it to
- * make room. Note that a new skb (or a clone) is
- * allocated. If we return an error from this point on, make
- * sure we free the new skb but do not free the original skb
- * since that is done by the caller for the error case.
+ * make room. Adjust truesize.
*/
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
sizeof(struct udphdr) + hdr_len + sizeof(ppph);
+ old_headroom = skb_headroom(skb);
if (skb_cow_head(skb, headroom))
- goto abort;
+ goto abort_put_sess_tun;
+
+ new_headroom = skb_headroom(skb);
+ skb_orphan(skb);
+ skb->truesize += new_headroom - old_headroom;
/* Setup PPP header */
__skb_push(skb, sizeof(ppph));
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
skb->dst = dst_clone(__sk_dst_get(sk_tun));
- skb_orphan(skb);
- skb->sk = sk_tun;
+ pppol2tp_skb_set_owner_w(skb, sk_tun);
/* Queue the packet to IP for output */
len = skb->len;
session->stats.tx_errors++;
}
+ sock_put(sk_tun);
+ sock_put(sk);
return 1;
+abort_put_sess_tun:
+ sock_put(sk_tun);
+abort_put_sess:
+ sock_put(sk);
abort:
/* Free the original skb */
kfree_skb(skb);
{
struct pppol2tp_tunnel *tunnel;
- tunnel = pppol2tp_sock_to_tunnel(sk);
+ tunnel = sk->sk_user_data;
if (tunnel == NULL)
goto end;
if (sk->sk_user_data != NULL) {
struct pppol2tp_tunnel *tunnel;
- session = pppol2tp_sock_to_session(sk);
+ session = sk->sk_user_data;
if (session == NULL)
goto out;
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
/* Don't use pppol2tp_sock_to_tunnel() here to
* get the tunnel context because the tunnel
* socket might have already been closed (its
static int pppol2tp_release(struct socket *sock)
{
struct sock *sk = sock->sk;
+ struct pppol2tp_session *session;
int error;
if (!sk)
sock_orphan(sk);
sock->sk = NULL;
+ session = pppol2tp_sock_to_session(sk);
+
/* Purge any queued data */
skb_queue_purge(&sk->sk_receive_queue);
skb_queue_purge(&sk->sk_write_queue);
+ if (session != NULL) {
+ struct sk_buff *skb;
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ kfree_skb(skb);
+ sock_put(sk);
+ }
+ }
release_sock(sk);
error = ppp_register_channel(&po->chan);
if (error)
- goto end;
+ goto end_put_tun;
/* This is how we get the session context from the socket. */
sk->sk_user_data = session;
PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
"%s: created\n", session->name);
+end_put_tun:
+ sock_put(tunnel_sock);
end:
release_sock(sk);
*usockaddr_len = len;
error = 0;
+ sock_put(sock->sk);
end:
return error;
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
- goto end;
+ sock_put(session->tunnel_sock);
+ goto end_put_sess;
}
err = pppol2tp_session_ioctl(session, cmd, arg);
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_setsockopt(sk, session, optname, val);
err = 0;
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_getsockopt(sk, session, optname, &val);
err = -EFAULT;
if (put_user(len, (int __user *) optlen))
- goto end;
+ goto end_put_sess;
if (copy_to_user((void __user *) optval, &val, len))
- goto end;
+ goto end_put_sess;
err = 0;
+
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
u64 tx_mat0_n[0x8];
#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8)
- u8 unused_1[0x8];
+ u64 xmsi_mask_reg;
u64 stat_byte_cnt;
#define STAT_BC(n) vBIT(n,4,12)
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.23"
+#define DRV_VERSION "2.0.26.24"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
struct pci_dev *tdev = NULL;
while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
- if (tdev->bus == s2io_pdev->bus->parent)
+ if (tdev->bus == s2io_pdev->bus->parent) {
pci_dev_put(tdev);
return 1;
+ }
}
}
return 0;
TTI_DATA1_MEM_TX_URNG_B(0x10) |
TTI_DATA1_MEM_TX_URNG_C(0x30) |
TTI_DATA1_MEM_TX_TIMER_AC_EN;
-
- if (use_continuous_tx_intrs && (link == LINK_UP))
- val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ if (i == 0)
+ if (use_continuous_tx_intrs && (link == LINK_UP))
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
writeq(val64, &bar0->tti_data1_mem);
- val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
- TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x40) |
- TTI_DATA2_MEM_TX_UFC_D(0x80);
+ if (nic->config.intr_type == MSI_X) {
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x100) |
+ TTI_DATA2_MEM_TX_UFC_C(0x200) |
+ TTI_DATA2_MEM_TX_UFC_D(0x300);
+ } else {
+ if ((nic->config.tx_steering_type ==
+ TX_DEFAULT_STEERING) &&
+ (config->tx_fifo_num > 1) &&
+ (i >= nic->udp_fifo_idx) &&
+ (i < (nic->udp_fifo_idx +
+ nic->total_udp_fifos)))
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
+ TTI_DATA2_MEM_TX_UFC_B(0x80) |
+ TTI_DATA2_MEM_TX_UFC_C(0x100) |
+ TTI_DATA2_MEM_TX_UFC_D(0x120);
+ else
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x20) |
+ TTI_DATA2_MEM_TX_UFC_C(0x40) |
+ TTI_DATA2_MEM_TX_UFC_D(0x80);
+ }
writeq(val64, &bar0->tti_data2_mem);
}
}
+static int s2io_chk_rx_buffers(struct ring_info *ring)
+{
+ if (fill_rx_buffers(ring) == -ENOMEM) {
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ }
+ return 0;
+}
+
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @napi : pointer to the napi structure.
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-static int s2io_poll(struct napi_struct *napi, int budget)
+static int s2io_poll_msix(struct napi_struct *napi, int budget)
{
- struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
- struct net_device *dev = nic->dev;
- int pkt_cnt = 0, org_pkts_to_process;
- struct mac_info *mac_control;
+ struct ring_info *ring = container_of(napi, struct ring_info, napi);
+ struct net_device *dev = ring->dev;
struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+ struct s2io_nic *nic = dev->priv;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- int i;
+ int budget_org = budget;
- mac_control = &nic->mac_control;
config = &nic->config;
+ mac_control = &nic->mac_control;
- nic->pkts_to_process = budget;
- org_pkts_to_process = nic->pkts_to_process;
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
- writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
- readl(&bar0->rx_traffic_int);
+ pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
- for (i = 0; i < config->rx_ring_num; i++) {
- rx_intr_handler(&mac_control->rings[i]);
- pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
- if (!nic->pkts_to_process) {
- /* Quota for the current iteration has been met */
- goto no_rx;
- }
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /*Re Enable MSI-Rx Vector*/
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += 7 - ring->ring_no;
+ val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
+ writeb(val8, addr);
+ val8 = readb(addr);
}
+ return pkts_processed;
+}
+static int s2io_poll_inta(struct napi_struct *napi, int budget)
+{
+ struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
+ struct ring_info *ring;
+ struct net_device *dev = nic->dev;
+ struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ int ring_pkts_processed, i;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
+ int budget_org = budget;
- netif_rx_complete(dev, napi);
+ config = &nic->config;
+ mac_control = &nic->mac_control;
- for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
- break;
- }
- }
- /* Re enable the Rx interrupts. */
- writeq(0x0, &bar0->rx_traffic_mask);
- readl(&bar0->rx_traffic_mask);
- return pkt_cnt;
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
-no_rx:
for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
+ ring = &mac_control->rings[i];
+ ring_pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
+ pkts_processed += ring_pkts_processed;
+ budget -= ring_pkts_processed;
+ if (budget <= 0)
break;
- }
}
- return pkt_cnt;
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /* Re enable the Rx interrupts for the ring */
+ writeq(0, &bar0->rx_traffic_mask);
+ readl(&bar0->rx_traffic_mask);
+ }
+ return pkts_processed;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
/* check for received packet and indicate up to network */
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
/**
* rx_intr_handler - Rx interrupt handler
- * @nic: device private variable.
+ * @ring_info: per ring structure.
+ * @budget: budget for napi processing.
* Description:
* If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
* stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
- * NONE.
+ * No. of napi packets processed.
*/
-static void rx_intr_handler(struct ring_info *ring_data)
+static int rx_intr_handler(struct ring_info *ring_data, int budget)
{
int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
- int pkt_cnt = 0;
+ int pkt_cnt = 0, napi_pkts = 0;
int i;
struct RxD1* rxdp1;
struct RxD3* rxdp3;
DBG_PRINT(ERR_DBG, "%s: The skb is ",
ring_data->dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
+ return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
rxdp1 = (struct RxD1*)rxdp;
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
- if(ring_data->nic->config.napi){
- ring_data->nic->pkts_to_process -= 1;
- if (!ring_data->nic->pkts_to_process)
+ if (ring_data->nic->config.napi) {
+ budget--;
+ napi_pkts++;
+ if (!budget)
break;
}
pkt_cnt++;
}
}
}
+ return(napi_pkts);
}
/**
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
- int i;
+ int i, msix_index;
+
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
- val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
+ val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
- int i;
+ int i, msix_index;
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
/* Store and display */
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- val64 = (s2BIT(15) | vBIT(i, 26, 6));
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
+ val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
static int s2io_enable_msi_x(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- u64 tx_mat, rx_mat;
+ u64 rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
- nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
+ nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
GFP_KERNEL);
if (!nic->entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
+
+ memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
nic->s2io_entries =
- kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
+ kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (!nic->s2io_entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
-
- for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
- nic->entries[i].entry = i;
- nic->s2io_entries[i].entry = i;
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
+ memset(nic->s2io_entries, 0,
+ nic->num_entries * sizeof(struct s2io_msix_entry));
+
+ nic->entries[0].entry = 0;
+ nic->s2io_entries[0].entry = 0;
+ nic->s2io_entries[0].in_use = MSIX_FLG;
+ nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
+ nic->s2io_entries[0].arg = &nic->mac_control.fifos;
+
+ for (i = 1; i < nic->num_entries; i++) {
+ nic->entries[i].entry = ((i - 1) * 8) + 1;
+ nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
nic->s2io_entries[i].arg = NULL;
nic->s2io_entries[i].in_use = 0;
}
- tx_mat = readq(&bar0->tx_mat0_n[0]);
- for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
- tx_mat |= TX_MAT_SET(i, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
- nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
- }
- writeq(tx_mat, &bar0->tx_mat0_n[0]);
-
rx_mat = readq(&bar0->rx_mat);
- for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
+ for (j = 0; j < nic->config.rx_ring_num; j++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
- nic->s2io_entries[msix_indx].arg
- = &nic->mac_control.rings[j];
- nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
+ nic->s2io_entries[j+1].in_use = MSIX_FLG;
+ msix_indx += 8;
}
writeq(rx_mat, &bar0->rx_mat);
+ readq(&bar0->rx_mat);
- nic->avail_msix_vectors = 0;
- ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
- if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
- nic->avail_msix_vectors = ret;
- ret = pci_enable_msix(nic->pdev, nic->entries, ret);
- }
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
- nic->avail_msix_vectors = 0;
return -ENOMEM;
}
- if (!nic->avail_msix_vectors)
- nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
/*
* To enable MSI-X, MSI also needs to be enabled, due to a bug
int i;
u16 msi_control;
- for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+ for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use ==
MSIX_REGISTERED_SUCCESS) {
int vector = sp->entries[i].vector;
netif_carrier_off(dev);
sp->last_link_state = 0;
- if (sp->config.intr_type == MSI_X) {
- int ret = s2io_enable_msi_x(sp);
-
- if (!ret) {
- ret = s2io_test_msi(sp);
- /* rollback MSI-X, will re-enable during add_isr() */
- remove_msix_isr(sp);
- }
- if (ret) {
-
- DBG_PRINT(ERR_DBG,
- "%s: MSI-X requested but failed to enable\n",
- dev->name);
- sp->config.intr_type = INTA;
- }
- }
-
- /* NAPI doesn't work well with MSI(X) */
- if (sp->config.intr_type != INTA) {
- if(sp->config.napi)
- sp->config.napi = 0;
- }
-
/* Initialize H/W and enable interrupts */
err = s2io_card_up(sp);
if (err) {
if (sp->entries) {
kfree(sp->entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (sp->num_entries * sizeof(struct msix_entry));
}
if (sp->s2io_entries) {
kfree(sp->s2io_entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (sp->num_entries * sizeof(struct s2io_msix_entry));
}
}
return err;
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
-static int s2io_chk_rx_buffers(struct ring_info *ring)
-{
- if (fill_rx_buffers(ring) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
- }
- return 0;
-}
-
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
struct ring_info *ring = (struct ring_info *)dev_id;
struct s2io_nic *sp = ring->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct net_device *dev = sp->dev;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
return IRQ_HANDLED;
- rx_intr_handler(ring);
- s2io_chk_rx_buffers(ring);
+ if (sp->config.napi) {
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += (7 - ring->ring_no);
+ val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
+ writeb(val8, addr);
+ val8 = readb(addr);
+ netif_rx_schedule(dev, &ring->napi);
+ } else {
+ rx_intr_handler(ring, 0);
+ s2io_chk_rx_buffers(ring);
+ }
return IRQ_HANDLED;
}
static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
{
- struct fifo_info *fifo = (struct fifo_info *)dev_id;
- struct s2io_nic *sp = fifo->nic;
+ int i;
+ struct fifo_info *fifos = (struct fifo_info *)dev_id;
+ struct s2io_nic *sp = fifos->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct config_param *config = &sp->config;
+ u64 reason;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
+ return IRQ_NONE;
+
+ reason = readq(&bar0->general_int_status);
+ if (unlikely(reason == S2IO_MINUS_ONE))
+ /* Nothing much can be done. Get out */
return IRQ_HANDLED;
- tx_intr_handler(fifo);
+ writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
+
+ if (reason & GEN_INTR_TXTRAFFIC)
+ writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
+
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&fifos[i]);
+
+ writeq(sp->general_int_mask, &bar0->general_int_mask);
+ readl(&bar0->general_int_status);
+
return IRQ_HANDLED;
}
+
static void s2io_txpic_intr_handle(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (config->napi) {
if (reason & GEN_INTR_RXTRAFFIC) {
- if (likely(netif_rx_schedule_prep(dev,
- &sp->napi))) {
- __netif_rx_schedule(dev, &sp->napi);
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_mask);
- } else
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_int);
+ netif_rx_schedule(dev, &sp->napi);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+ readl(&bar0->rx_traffic_int);
}
} else {
/*
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
}
/*
/* After proper initialization of H/W, register ISR */
if (sp->config.intr_type == MSI_X) {
- int i, msix_tx_cnt=0,msix_rx_cnt=0;
-
- for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
- if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
- sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+ int i, msix_rx_cnt = 0;
+
+ for (i = 0; i < sp->num_entries; i++) {
+ if (sp->s2io_entries[i].in_use == MSIX_FLG) {
+ if (sp->s2io_entries[i].type ==
+ MSIX_RING_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+ } else if (sp->s2io_entries[i].type ==
+ MSIX_ALARM_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_fifo_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
- sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
- (unsigned long long)
- sp->msix_info[i].addr,
- (unsigned long long)
- sp->msix_info[i].data);
- } else {
- msix_tx_cnt++;
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+
}
- } else {
- sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
- dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_ring_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
+ /* if either data or addr is zero print it. */
+ if (!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
+ DBG_PRINT(ERR_DBG,
+ "%s @Addr:0x%llx Data:0x%llx\n",
+ sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
(unsigned long long)
- sp->msix_info[i].data);
- } else {
+ ntohl(sp->msix_info[i].data));
+ } else
msix_rx_cnt++;
+ if (err) {
+ remove_msix_isr(sp);
+
+ DBG_PRINT(ERR_DBG,
+ "%s:MSI-X-%d registration "
+ "failed\n", dev->name, i);
+
+ DBG_PRINT(ERR_DBG,
+ "%s: Defaulting to INTA\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ break;
}
+ sp->s2io_entries[i].in_use =
+ MSIX_REGISTERED_SUCCESS;
}
- if (err) {
- remove_msix_isr(sp);
- DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
- "failed\n", dev->name, i);
- DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
- dev->name);
- sp->config.intr_type = INTA;
- break;
- }
- sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
}
if (!err) {
- printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
- msix_tx_cnt);
printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
- msix_rx_cnt);
+ --msix_rx_cnt);
+ DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
+ " through alarm vector\n");
}
}
if (sp->config.intr_type == INTA) {
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
/* Disable napi */
- if (config->napi)
- napi_disable(&sp->napi);
+ if (sp->config.napi) {
+ int off = 0;
+ if (config->intr_type == MSI_X) {
+ for (; off < sp->config.rx_ring_num; off++)
+ napi_disable(&sp->mac_control.rings[off].napi);
+ }
+ else
+ napi_disable(&sp->napi);
+ }
/* disable Tx and Rx traffic on the NIC */
if (do_io)
}
/* Initialise napi */
- if (config->napi)
- napi_enable(&sp->napi);
+ if (config->napi) {
+ int i;
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < sp->config.rx_ring_num; i++)
+ napi_enable(&sp->mac_control.rings[i].napi);
+ } else {
+ napi_enable(&sp->napi);
+ }
+ }
/* Maintain the state prior to the open */
if (sp->promisc_flg)
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
- en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+ en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS);
else {
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
interruptible |= TX_PIC_INTR;
rx_ring_num = MAX_RX_RINGS;
}
- if (*dev_intr_type != INTA)
- napi = 0;
-
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
"Defaulting to INTA\n");
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
- netif_napi_add(dev, &sp->napi, s2io_poll, 32);
-
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = s2io_netpoll;
#endif
}
}
+ if (sp->config.intr_type == MSI_X) {
+ sp->num_entries = config->rx_ring_num + 1;
+ ret = s2io_enable_msi_x(sp);
+
+ if (!ret) {
+ ret = s2io_test_msi(sp);
+ /* rollback MSI-X, will re-enable during add_isr() */
+ remove_msix_isr(sp);
+ }
+ if (ret) {
+
+ DBG_PRINT(ERR_DBG,
+ "%s: MSI-X requested but failed to enable\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ }
+ }
+
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < config->rx_ring_num ; i++)
+ netif_napi_add(dev, &mac_control->rings[i].napi,
+ s2io_poll_msix, 64);
+ } else {
+ netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
+ }
+
/* Not needed for Herc */
if (sp->device_type & XFRAME_I_DEVICE) {
/*
/* store mac addresses from CAM to s2io_nic structure */
do_s2io_store_unicast_mc(sp);
+ /* Configure MSIX vector for number of rings configured plus one */
+ if ((sp->device_type == XFRAME_II_DEVICE) &&
+ (config->intr_type == MSI_X))
+ sp->num_entries = config->rx_ring_num + 1;
+
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */
break;
}
- if (napi)
+ switch (sp->config.napi) {
+ case 0:
+ DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
+ break;
+ case 1:
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+ break;
+ }
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
sp->config.tx_fifo_num);
/* per-ring buffer counter */
u32 rx_bufs_left;
- #define MAX_LRO_SESSIONS 32
+#define MAX_LRO_SESSIONS 32
struct lro lro0_n[MAX_LRO_SESSIONS];
u8 lro;
/* copy of sp->pdev pointer */
struct pci_dev *pdev;
+ /* Per ring napi struct */
+ struct napi_struct napi;
+
+ unsigned long interrupt_count;
+
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
* Structure to keep track of the MSI-X vectors and the corresponding
* argument registered against each vector
*/
-#define MAX_REQUESTED_MSI_X 17
+#define MAX_REQUESTED_MSI_X 9
struct s2io_msix_entry
{
u16 vector;
void *arg;
u8 type;
-#define MSIX_FIFO_TYPE 1
-#define MSIX_RING_TYPE 2
+#define MSIX_ALARM_TYPE 1
+#define MSIX_RING_TYPE 2
u8 in_use;
#define MSIX_REGISTERED_SUCCESS 0xAA
*/
int pkts_to_process;
struct net_device *dev;
- struct napi_struct napi;
struct mac_info mac_control;
struct config_param config;
struct pci_dev *pdev;
*/
u8 other_fifo_idx;
+ struct napi_struct napi;
/* after blink, the adapter must be restored with original
* values.
*/
unsigned long long start_time;
struct vlan_group *vlgrp;
#define MSIX_FLG 0xA5
+ int num_entries;
struct msix_entry *entries;
int msi_detected;
wait_queue_head_t msi_wait;
u16 lro_max_aggr_per_sess;
volatile unsigned long state;
u64 general_int_mask;
+
#define VPD_STRING_LEN 80
u8 product_name[VPD_STRING_LEN];
u8 serial_num[VPD_STRING_LEN];
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
-static void rx_intr_handler(struct ring_info *ring_data);
+static int rx_intr_handler(struct ring_info *ring_data, int budget);
static void tx_intr_handler(struct fifo_info *fifo_data);
static void s2io_handle_errors(void * dev_id);
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);
static void s2io_reset(struct s2io_nic * sp);
-static int s2io_poll(struct napi_struct *napi, int budget);
+static int s2io_poll_msix(struct napi_struct *napi, int budget);
+static int s2io_poll_inta(struct napi_struct *napi, int budget);
static void s2io_init_pci(struct s2io_nic * sp);
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
static void s2io_alarm_handle(unsigned long data);
#define SBMAC_MAX_TXDESCR 256
#define SBMAC_MAX_RXDESCR 256
-#define ETHER_ALIGN 2
-#define ETHER_ADDR_LEN 6
+#define ETHER_ADDR_LEN 6
#define ENET_PACKET_SIZE 1518
/*#define ENET_PACKET_SIZE 9216 */
spinlock_t sbm_lock; /* spin lock */
int sbm_devflags; /* current device flags */
- int sbm_buffersize;
-
/*
* Controller-specific things
*/
static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
int txrx, int maxdescr);
static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m);
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *m);
static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
static void sbdma_emptyring(struct sbmacdma *d);
-static void sbdma_fillring(struct sbmacdma *d);
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
int work_to_do, int poll);
static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
d->sbdma_remptr = NULL;
}
-static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+static inline void sbdma_align_skb(struct sk_buff *skb,
+ unsigned int power2, unsigned int offset)
{
- unsigned long addr;
- unsigned long newaddr;
-
- addr = (unsigned long) skb->data;
-
- newaddr = (addr + power2 - 1) & ~(power2 - 1);
+ unsigned char *addr = skb->data;
+ unsigned char *newaddr = PTR_ALIGN(addr, power2);
- skb_reserve(skb,newaddr-addr+offset);
+ skb_reserve(skb, newaddr - addr + offset);
}
* this queues a buffer for inbound packets.
*
* Input parameters:
- * d - DMA channel descriptor
+ * sc - softc structure
+ * d - DMA channel descriptor
* sb - sk_buff to add, or NULL if we should allocate one
*
* Return value:
********************************************************************* */
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *sb)
{
+ struct net_device *dev = sc->sbm_dev;
struct sbdmadscr *dsc;
struct sbdmadscr *nextdsc;
struct sk_buff *sb_new = NULL;
*/
if (sb == NULL) {
- sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+ sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+ SMP_CACHE_BYTES * 2 +
+ NET_IP_ALIGN);
if (sb_new == NULL) {
pr_info("%s: sk_buff allocation failed\n",
d->sbdma_eth->sbm_dev->name);
return -ENOBUFS;
}
- sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+ sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
}
else {
sb_new = sb;
* Do not interrupt per DMA transfer.
*/
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
#else
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
M_DMA_DSCRA_INTERRUPT;
#endif
* with sk_buffs
*
* Input parameters:
- * d - DMA channel
+ * sc - softc structure
+ * d - DMA channel
*
* Return value:
* nothing
********************************************************************* */
-static void sbdma_fillring(struct sbmacdma *d)
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
{
int idx;
- for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
- if (sbdma_add_rcvbuffer(d,NULL) != 0)
+ for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
+ if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
break;
}
}
* packet and put it right back on the receive ring.
*/
- if (unlikely (sbdma_add_rcvbuffer(d,NULL) ==
- -ENOBUFS)) {
+ if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
+ -ENOBUFS)) {
dev->stats.rx_dropped++;
- sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+ /* Re-add old buffer */
+ sbdma_add_rcvbuffer(sc, d, sb);
/* No point in continuing at the moment */
printk(KERN_ERR "dropped packet (1)\n");
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
* put it back on the receive ring.
*/
dev->stats.rx_errors++;
- sbdma_add_rcvbuffer(d,sb);
+ sbdma_add_rcvbuffer(sc, d, sb);
}
* Fill the receive ring
*/
- sbdma_fillring(&(s->sbm_rxdma));
+ sbdma_fillring(s, &(s->sbm_rxdma));
/*
* Turn on the rest of the bits in the enable register
dev->dev_addr[i] = eaddr[i];
}
-
- /*
- * Init packet size
- */
-
- sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
-
/*
* Initialize context (get pointers to registers and stuff), then
* allocate the memory for the descriptor tables.
unsigned entry;
u32 tx_status;
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
-
if (unlikely(skb->len > TX_BUF_SIZE)) {
dev->stats.tx_dropped++;
goto out;
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
len = skb->len;
+ if (len < ETH_ZLEN) {
+ memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
+ 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
wmb();
#endif
#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
- if (FALCON_REV(efx) >= FALCON_REV_B0) { \
+ if (falcon_rev(efx) >= FALCON_REV_B0) { \
EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
} else { \
EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
} while (0)
#define EFX_QWORD_FIELD_VER(efx, qword, field) \
- (FALCON_REV(efx) >= FALCON_REV_B0 ? \
+ (falcon_rev(efx) >= FALCON_REV_B0 ? \
EFX_QWORD_FIELD((qword), field##_B0) : \
EFX_QWORD_FIELD((qword), field##_A1))
#define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t))
#define EFX_DMA_TYPE_WIDTH(width) \
(((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH)
-#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \
- ~((u64) 0) : ~((u32) 0))
-#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK)
#endif /* EFX_BITFIELD_H */
struct efx_blinker *bl = &efx->board_info.blinker;
efx->board_info.set_fault_led(efx, bl->state);
bl->state = !bl->state;
- if (bl->resubmit) {
- bl->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&bl->timer);
- }
+ if (bl->resubmit)
+ mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
}
static void board_blink(struct efx_nic *efx, int blink)
blinker->state = 0;
setup_timer(&blinker->timer, blink_led_timer,
(unsigned long)efx);
- blinker->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&blinker->timer);
+ mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
} else {
blinker->resubmit = 0;
if (blinker->timer.function)
*/
static inline void efx_channel_processed(struct efx_channel *channel)
{
- /* Write to EVQ_RPTR_REG. If a new event arrived in a race
- * with finishing processing, a new interrupt will be raised.
- */
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we acknowledge the events we've seen. Make sure
+ * it's cleared before then. */
channel->work_pending = 0;
- smp_wmb(); /* Ensure channel updated before any new interrupt. */
+ smp_wmb();
+
falcon_eventq_read_ack(channel);
}
napi_disable(&channel->napi_str);
/* Poll the channel */
- (void) efx_process_channel(channel, efx->type->evq_size);
+ efx_process_channel(channel, efx->type->evq_size);
/* Ack the eventq. This may cause an interrupt to be generated
* when they are reenabled */
*
*************************************************************************/
-/* Setup per-NIC RX buffer parameters.
- * Calculate the rx buffer allocation parameters required to support
- * the current MTU, including padding for header alignment and overruns.
- */
-static void efx_calc_rx_buffer_params(struct efx_nic *efx)
-{
- unsigned int order, len;
-
- len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
- EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
- efx->type->rx_buffer_padding);
-
- /* Calculate page-order */
- for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
- ;
-
- efx->rx_buffer_len = len;
- efx->rx_buffer_order = order;
-}
-
static int efx_probe_channel(struct efx_channel *channel)
{
struct efx_tx_queue *tx_queue;
struct efx_channel *channel;
int rc = 0;
- efx_calc_rx_buffer_params(efx);
+ /* Calculate the rx buffer allocation parameters required to
+ * support the current MTU, including padding for header
+ * alignment and overruns.
+ */
+ efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+ EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+ efx->type->rx_buffer_padding);
+ efx->rx_buffer_order = get_order(efx->rx_buffer_len);
/* Initialise the channels */
efx_for_each_channel(channel, efx) {
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we enable it. Make sure it's cleared before
+ * then. Similarly, make sure it sees the enabled flag set. */
channel->work_pending = 0;
channel->enabled = 1;
- smp_wmb(); /* ensure channel updated before first interrupt */
+ smp_wmb();
napi_enable(&channel->napi_str);
mutex_unlock(&efx->mac_lock);
/* Serialise against efx_set_multicast_list() */
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
efx->membase = ioremap_nocache(efx->membase_phys,
efx->type->mem_map_size);
if (!efx->membase) {
- EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
- efx->type->mem_bar, efx->membase_phys,
+ EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
+ efx->type->mem_bar,
+ (unsigned long long)efx->membase_phys,
efx->type->mem_map_size);
rc = -ENOMEM;
goto fail4;
}
- EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
- efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
- efx->membase);
+ EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
+ efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+ efx->type->mem_map_size, efx->membase);
return 0;
fail4:
release_mem_region(efx->membase_phys, efx->type->mem_map_size);
fail3:
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
fail2:
pci_disable_device(efx->pci_dev);
fail1:
if (efx->membase_phys) {
pci_release_region(efx->pci_dev, efx->type->mem_bar);
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
}
pci_disable_device(efx->pci_dev);
return;
if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
return;
- if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+ if (efx_dev_registered(efx) && !netif_running(efx->net_dev))
return;
/* Mark the port as enabled so port reconfigurations can start, then
cancel_delayed_work_sync(&efx->monitor_work);
/* Ensure that all RX slow refills are complete. */
- efx_for_each_rx_queue(rx_queue, efx) {
+ efx_for_each_rx_queue(rx_queue, efx)
cancel_delayed_work_sync(&rx_queue->work);
- }
/* Stop scheduled port reconfigurations */
cancel_work_sync(&efx->reconfigure_work);
falcon_disable_interrupts(efx);
if (efx->legacy_irq)
synchronize_irq(efx->legacy_irq);
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
+ }
/* Stop all NAPI processing and synchronous rx refills */
efx_for_each_channel(channel, efx)
/* Stop the kernel transmit interface late, so the watchdog
* timer isn't ticking over the flush */
efx_stop_queue(efx);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
return 0;
}
-/* Context: process, dev_base_lock held, non-blocking. */
+/* Context: process, dev_base_lock or RTNL held, non-blocking. */
static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
{
struct efx_nic *efx = net_dev->priv;
struct efx_mac_stats *mac_stats = &efx->mac_stats;
struct net_device_stats *stats = &net_dev->stats;
+ /* Update stats if possible, but do not wait if another thread
+ * is updating them (or resetting the NIC); slightly stale
+ * stats are acceptable.
+ */
if (!spin_trylock(&efx->stats_lock))
return stats;
if (efx->state == STATE_RUNNING) {
static int efx_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
- struct net_device *net_dev = (struct net_device *)ptr;
+ struct net_device *net_dev = ptr;
if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
struct efx_nic *efx = net_dev->priv;
efx_for_each_tx_queue(tx_queue, efx)
efx_release_tx_buffers(tx_queue);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
unregister_netdev(efx->net_dev);
}
if (method == RESET_TYPE_DISABLE) {
/* Reinitialise the device anyway so the driver unload sequence
* can talk to the external SRAM */
- (void) falcon_init_nic(efx);
+ falcon_init_nic(efx);
rc = -EIO;
goto fail4;
}
**************************************************************************
*/
-/* DMA address mask (up to 46-bit, avoiding compiler warnings)
- *
- * Note that it is possible to have a platform with 64-bit longs and
- * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the
- * platform DMA mask.
- */
-#if BITS_PER_LONG == 64
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL)
-#else
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL)
-#endif
+/* DMA address mask */
+#define FALCON_DMA_MASK DMA_BIT_MASK(46)
/* TX DMA length mask (13-bit) */
#define FALCON_TX_DMA_MASK (4096 - 1)
#define PCI_EXP_LNKSTA_LNK_WID_LBN 4
#define FALCON_IS_DUAL_FUNC(efx) \
- (FALCON_REV(efx) < FALCON_REV_B0)
+ (falcon_rev(efx) < FALCON_REV_B0)
/**************************************************************************
*
TX_DESCQ_TYPE, 0,
TX_NON_IP_DROP_DIS_B0, 1);
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum);
falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
tx_queue->queue);
- if (FALCON_REV(efx) < FALCON_REV_B0) {
+ if (falcon_rev(efx) < FALCON_REV_B0) {
efx_oword_t reg;
BUG_ON(tx_queue->queue >= 128); /* HW limit */
efx_oword_t rx_desc_ptr;
struct efx_nic *efx = rx_queue->efx;
int rc;
- int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0;
+ int is_b0 = falcon_rev(efx) >= FALCON_REV_B0;
int iscsi_digest_en = is_b0;
EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
tx_queue = &efx->tx_queue[tx_ev_q_label];
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock(efx->net_dev);
falcon_notify_tx_desc(tx_queue);
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock(efx->net_dev);
} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
EFX_WORKAROUND_10727(efx)) {
RX_EV_TCP_UDP_CHKSUM_ERR);
rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
- rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ?
+ rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
EFX_QWORD_FIELD(*event, XG_PHY_INTR))
is_phy_event = 1;
- if ((FALCON_REV(efx) >= FALCON_REV_B0) &&
+ if ((falcon_rev(efx) >= FALCON_REV_B0) &&
EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0))
is_phy_event = 1;
static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
{
struct falcon_nic_data *nic_data = efx->nic_data;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
efx_oword_t fatal_intr;
int error, mem_perr;
static int n_int_errors;
*/
static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
efx_dword_t reg;
u32 queues;
static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
int syserr;
int queues;
*/
static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
{
- struct efx_channel *channel = (struct efx_channel *)dev_id;
+ struct efx_channel *channel = dev_id;
struct efx_nic *efx = channel->efx;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
int syserr;
efx->last_irq_cpu = raw_smp_processor_id();
unsigned long offset;
efx_dword_t dword;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
for (offset = RX_RSS_INDIR_TBL_B0;
if (!EFX_INT_MODE_USE_MSI(efx)) {
irq_handler_t handler;
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
handler = falcon_legacy_interrupt_b0;
else
handler = falcon_legacy_interrupt_a1;
efx_oword_t reg;
/* Disable MSI/MSI-X interrupts */
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
free_irq(channel->irq, channel);
+ }
/* ACK legacy interrupt */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
falcon_read(efx, ®, INT_ISR0_B0);
else
falcon_irq_ack_a1(efx);
efx_oword_t temp;
int count;
- if ((FALCON_REV(efx) < FALCON_REV_B0) ||
+ if ((falcon_rev(efx) < FALCON_REV_B0) ||
(efx->loopback_mode != LOOPBACK_NONE))
return;
{
efx_oword_t temp;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
/* Isolate the MAC -> RX */
MAC_SPEED, link_speed);
/* On B0, MAC backpressure can be disabled and packets get
* discarded. */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
!efx->link_up);
}
EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
/* Unisolate the MAC -> RX */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
falcon_write(efx, ®, RX_CFG_REG_KER);
}
return 0;
/* Statistics fetch will fail if the MAC is in TX drain */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
efx_oword_t temp;
falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
int addr, int value)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
* could be read, -1 will be returned. */
static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
int value = -1;
falcon_init_mdio(&efx->mii);
/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
efx->flow_control = EFX_FC_RX | EFX_FC_TX;
else
efx->flow_control = EFX_FC_RX;
return -ENODEV;
}
- switch (FALCON_REV(efx)) {
+ switch (falcon_rev(efx)) {
case FALCON_REV_A0:
case 0xff:
EFX_ERR(efx, "Falcon rev A0 not supported\n");
break;
default:
- EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx));
+ EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx));
return -ENODEV;
}
/* Allocate storage for hardware specific data */
nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
- efx->nic_data = (void *) nic_data;
+ efx->nic_data = nic_data;
/* Determine number of ports etc. */
rc = falcon_probe_nic_variant(efx);
*/
int falcon_init_nic(struct efx_nic *efx)
{
- struct falcon_nic_data *data;
efx_oword_t temp;
unsigned thresh;
int rc;
- data = (struct falcon_nic_data *)efx->nic_data;
-
/* Set up the address region register. This is only needed
* for the B0 FPGA, but since we are just pushing in the
* reset defaults this may as well be unconditional. */
/* Set number of RSS queues for receive path. */
falcon_read(efx, &temp, RX_FILTER_CTL_REG);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, NUM_KER, 0);
else
EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1);
/* Prefetch threshold 2 => fetch when descriptor cache half empty */
EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
/* Squash TX of packets of 16 bytes or less */
- if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
+ if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
falcon_write(efx, &temp, TX_CFG2_REG_KER);
if (EFX_WORKAROUND_7575(efx))
EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
(3 * 4096) / 32);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
/* RX FIFO flow control thresholds */
falcon_write(efx, &temp, RX_CFG_REG_KER);
/* Set destination of both TX and RX Flush events */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
falcon_write(efx, &temp, DP_CTRL_REG);
}
falcon_free_buffer(efx, &efx->irq_status);
- (void) falcon_reset_hw(efx, RESET_TYPE_ALL);
+ falcon_reset_hw(efx, RESET_TYPE_ALL);
/* Release the second function after the reset */
if (nic_data->pci_dev2) {
FALCON_REV_B0 = 2,
};
-#define FALCON_REV(efx) ((efx)->pci_dev->revision)
+static inline int falcon_rev(struct efx_nic *efx)
+{
+ return efx->pci_dev->revision;
+}
extern struct efx_nic_type falcon_a_nic_type;
extern struct efx_nic_type falcon_b_nic_type;
u8 port1_phy_type;
__le16 asic_sub_revision;
__le16 board_revision;
-} __attribute__ ((packed));
+} __packed;
#define NVCONFIG_BASE 0x300
#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
__le16 board_struct_ver;
__le16 board_checksum;
struct falcon_nvconfig_board_v2 board_v2;
-} __attribute__ ((packed));
+} __packed;
#endif /* EFX_FALCON_HWDEFS_H */
#define FALCON_USE_QWORD_IO 1
#endif
-#define _falcon_writeq(efx, value, reg) \
- __raw_writeq((__force u64) (value), (efx)->membase + (reg))
-#define _falcon_writel(efx, value, reg) \
- __raw_writel((__force u32) (value), (efx)->membase + (reg))
-#define _falcon_readq(efx, reg) \
- ((__force __le64) __raw_readq((efx)->membase + (reg)))
-#define _falcon_readl(efx, reg) \
- ((__force __le32) __raw_readl((efx)->membase + (reg)))
+#ifdef FALCON_USE_QWORD_IO
+static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
+ unsigned int reg)
+{
+ __raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
+ unsigned int reg)
+{
+ __raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le32)__raw_readl(efx->membase + reg);
+}
/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
{
efx_dword_t reg;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return 1;
/* The ISR latches, so clear it and re-read */
{
efx_dword_t reg;
- if ((FALCON_REV(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
+ if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
return;
/* Flush the ISR */
EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
__func__, tries);
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
udelay(200);
tries--;
}
- EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n",
+ EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
max_tries);
return 0;
}
xaui_link_ok = falcon_xaui_link_ok(efx);
if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
/* Call the PHY check_hw routine */
rc = efx->phy_op->check_hw(efx);
reset = ((flow_control & EFX_FC_TX) &&
!(efx->flow_control & EFX_FC_TX));
if (EFX_WORKAROUND_11482(efx) && reset) {
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
/* Recover by resetting the EM block */
if (efx->link_up)
falcon_drain_tx_fifo(efx);
#ifndef EFX_DRIVER_NAME
#define EFX_DRIVER_NAME "sfc"
#endif
-#define EFX_DRIVER_VERSION "2.2.0136"
+#define EFX_DRIVER_VERSION "2.2"
#ifdef EFX_ENABLE_DEBUG
#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
#define EFX_WARN_ON_PARANOID(x) do {} while (0)
#endif
-#define NET_DEV_REGISTERED(efx) \
- ((efx)->net_dev->reg_state == NETREG_REGISTERED)
-
-/* Include net device name in log messages if it has been registered.
- * Use efx->name not efx->net_dev->name so that races with (un)registration
- * are harmless.
- */
-#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "")
-
/* Un-rate-limited logging */
#define EFX_ERR(efx, fmt, args...) \
-dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
#define EFX_INFO(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
#ifdef EFX_ENABLE_DEBUG
#define EFX_LOG(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#else
#define EFX_LOG(efx, fmt, args...) \
-dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#endif
#define EFX_TRACE(efx, fmt, args...) do {} while (0)
#define EFX_LOG_RL(efx, fmt, args...) \
do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
-/* Kernel headers may redefine inline anyway */
-#ifndef inline
-#define inline inline __attribute__ ((always_inline))
-#endif
-
/**************************************************************************
*
* Efx data structures
struct workqueue_struct *workqueue;
struct work_struct reset_work;
struct delayed_work monitor_work;
- unsigned long membase_phys;
+ resource_size_t membase_phys;
void __iomem *membase;
spinlock_t biu_lock;
enum efx_int_mode interrupt_mode;
unsigned n_rx_nodesc_drop_cnt;
- void *nic_data;
+ struct falcon_nic_data *nic_data;
struct mutex mac_lock;
int port_enabled;
void *loopback_selftest;
};
+static inline int efx_dev_registered(struct efx_nic *efx)
+{
+ return efx->net_dev->reg_state == NETREG_REGISTERED;
+}
+
+/* Net device name, for inclusion in log messages if it has been registered.
+ * Use efx->name not efx->net_dev->name so that races with (un)registration
+ * are harmless.
+ */
+static inline const char *efx_dev_name(struct efx_nic *efx)
+{
+ return efx_dev_registered(efx) ? efx->name : "";
+}
+
/**
* struct efx_nic_type - Efx device type definition
* @mem_bar: Memory BAR number
unsigned int txd_ring_mask;
unsigned int rxd_ring_mask;
unsigned int evq_size;
- dma_addr_t max_dma_mask;
+ u64 max_dma_mask;
unsigned int tx_dma_mask;
unsigned bug5391_mask;
*/
#define EFX_RXD_HEAD_ROOM 2
-/* Macros for zero-order pages (potentially) containing multiple RX buffers */
-#define RX_DATA_OFFSET(_data) \
- (((unsigned long) (_data)) & (PAGE_SIZE-1))
-#define RX_BUF_OFFSET(_rx_buf) \
- RX_DATA_OFFSET((_rx_buf)->data)
-
-#define RX_PAGE_SIZE(_efx) \
- (PAGE_SIZE * (1u << (_efx)->rx_buffer_order))
+static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf)
+{
+ /* Offset is always within one page, so we don't need to consider
+ * the page order.
+ */
+ return (__force unsigned long) buf->data & (PAGE_SIZE - 1);
+}
+static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
+{
+ return PAGE_SIZE << efx->rx_buffer_order;
+}
/**************************************************************************
static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr,
void **tcpudp_hdr, u64 *hdr_flags, void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct iphdr *iph;
struct tcphdr *th;
void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct ethhdr *eh;
struct iphdr *iph;
/* We support EtherII and VLAN encapsulated IPv4 */
- eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset);
+ eh = page_address(frag->page) + frag->page_offset;
*mac_hdr = eh;
if (eh->h_proto == htons(ETH_P_IP)) {
return -ENOMEM;
dma_addr = pci_map_page(efx->pci_dev, rx_buf->page,
- 0, RX_PAGE_SIZE(efx),
+ 0, efx_rx_buf_size(efx),
PCI_DMA_FROMDEVICE);
if (unlikely(pci_dma_mapping_error(dma_addr))) {
rx_queue->buf_page = rx_buf->page;
rx_queue->buf_dma_addr = dma_addr;
- rx_queue->buf_data = ((char *) page_address(rx_buf->page) +
+ rx_queue->buf_data = (page_address(rx_buf->page) +
EFX_PAGE_IP_ALIGN);
}
- offset = RX_DATA_OFFSET(rx_queue->buf_data);
rx_buf->len = bytes;
- rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
rx_buf->data = rx_queue->buf_data;
+ offset = efx_rx_buf_offset(rx_buf);
+ rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
/* Try to pack multiple buffers per page */
if (efx->rx_buffer_order == 0) {
rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff);
offset += ((bytes + 0x1ff) & ~0x1ff);
- space = RX_PAGE_SIZE(efx) - offset;
+ space = efx_rx_buf_size(efx) - offset;
if (space >= bytes) {
/* Refs dropped on kernel releasing each skb */
get_page(rx_queue->buf_page);
EFX_BUG_ON_PARANOID(rx_buf->skb);
if (rx_buf->unmap_addr) {
pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr,
- RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(efx),
+ PCI_DMA_FROMDEVICE);
rx_buf->unmap_addr = 0;
}
} else if (likely(rx_buf->skb)) {
return 0;
/* Record minimum fill level */
- if (unlikely(fill_level < rx_queue->min_fill))
+ if (unlikely(fill_level < rx_queue->min_fill)) {
if (fill_level)
rx_queue->min_fill = fill_level;
+ }
/* Acquire RX add lock. If this lock is contended, then a fast
* fill must already be in progress (e.g. in the refill
struct skb_frag_struct frags;
frags.page = rx_buf->page;
- frags.page_offset = RX_BUF_OFFSET(rx_buf);
+ frags.page_offset = efx_rx_buf_offset(rx_buf);
frags.size = rx_buf->len;
lro_receive_frags(lro_mgr, &frags, rx_buf->len,
if (unlikely(rx_buf->len > hdr_len)) {
struct skb_frag_struct *frag = skb_shinfo(skb)->frags;
frag->page = rx_buf->page;
- frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len;
+ frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len;
frag->size = skb->len - hdr_len;
skb_shinfo(skb)->nr_frags = 1;
skb->data_len = frag->size;
/* For a page that is part-way through splitting into RX buffers */
if (rx_queue->buf_page != NULL) {
pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr,
- RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(rx_queue->efx),
+ PCI_DMA_FROMDEVICE);
__free_pages(rx_queue->buf_page,
rx_queue->efx->rx_buffer_order);
rx_queue->buf_page = NULL;
payload = &state->payload;
- received = (struct efx_loopback_payload *)(char *) buf_ptr;
+ received = (struct efx_loopback_payload *) buf_ptr;
received->ip.saddr = payload->ip.saddr;
received->ip.check = payload->ip.check;
* interrupt handler. */
smp_wmb();
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock_bh(efx->net_dev);
rc = efx_xmit(efx, tx_queue, skb);
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock_bh(efx->net_dev);
if (rc != NETDEV_TX_OK) {
int tx_done = 0, rx_good, rx_bad;
int i, rc = 0;
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock_bh(efx->net_dev);
/* Count the number of tx completions, and decrement the refcnt. Any
dev_kfree_skb_any(skb);
}
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock_bh(efx->net_dev);
/* Check TX completion and received packet counts */
state->packet_count = min(1 << (i << 2), state->packet_count);
state->skbs = kzalloc(sizeof(state->skbs[0]) *
state->packet_count, GFP_KERNEL);
+ if (!state->skbs)
+ return -ENOMEM;
state->flush = 0;
EFX_LOG(efx, "TX queue %d testing %s loopback with %d "
* "flushing" so all inflight packets are dropped */
BUG_ON(efx->loopback_selftest);
state->flush = 1;
- efx->loopback_selftest = (void *)state;
+ efx->loopback_selftest = state;
rc = efx_test_loopbacks(efx, tests, loopback_modes);
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
/* Disable port 0 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
/* Clear any over-temperature alert */
- (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+ efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
}
/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
fail3:
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
fail2:
/* Disable port 0 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
fail1:
return rc;
}
int rc = 0;
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
efx->phy_data = phy_data;
tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
* perform a special software reset */
if ((phy_data->tx_disabled && !efx->tx_disabled) ||
loop_change) {
- (void) tenxpress_special_reset(efx);
+ tenxpress_special_reset(efx);
falcon_reset_xaui(efx);
}
if (unlikely(tx_queue->stopped)) {
fill_level = tx_queue->insert_count - tx_queue->read_count;
if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
- EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx));
+ EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
/* Do this under netif_tx_lock(), to avoid racing
* with efx_xmit(). */
base_dma = tsoh->dma_addr & PAGE_MASK;
p = &tx_queue->tso_headers_free;
- while (*p != NULL)
+ while (*p != NULL) {
if (((unsigned long)*p & PAGE_MASK) == base_kva)
*p = (*p)->next;
else
p = &(*p)->next;
+ }
pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma);
}
/* Allocate a DMA-mapped header buffer. */
if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) {
- if (tx_queue->tso_headers_free == NULL)
+ if (tx_queue->tso_headers_free == NULL) {
if (efx_tsoh_block_alloc(tx_queue))
return -1;
+ }
EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free);
tsoh = tx_queue->tso_headers_free;
tx_queue->tso_headers_free = tsoh->next;
{
unsigned i;
- if (tx_queue->buffer)
+ if (tx_queue->buffer) {
for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
+ }
while (tx_queue->tso_headers_free != NULL)
efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free,
*/
#define EFX_WORKAROUND_ALWAYS(efx) 1
-#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1)
+#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
/* XAUI resets if link not detected */
#define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
int rc;
phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
- efx->phy_data = (void *) phy_data;
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
" %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
}
#ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
{
- struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- u16 port = sky2->port;
-
- netif_tx_lock_bh(dev);
- napi_disable(&hw->napi);
-
- sky2->vlgrp = grp;
- if (grp) {
+ if (onoff) {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
}
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ netif_tx_lock_bh(dev);
+ napi_disable(&hw->napi);
+
+ sky2->vlgrp = grp;
+ sky2_set_vlan_mode(hw, port, grp != NULL);
sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
+#ifdef SKY2_VLAN_TAG_USED
+ sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
static int found;
int err = -ENODEV;
+ if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
+ return ERR_PTR(-ENODEV);
+
/* check that this machine has an onboard lance */
switch(idprom->id_machtype) {
case SM_SUN3|SM_3_50:
struct hme_tx_logent *tlp;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
tlp = &tx_log[txlog_cur_entry];
tlp->tstamp = (unsigned int)jiffies;
tlp->tx_new = hp->tx_new;
tlp->action = a;
tlp->status = s;
txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1);
- restore_flags(flags);
+ local_irq_restore(flags);
}
static __inline__ void tx_dump_log(void)
{
u16 asb;
u8 __iomem *xl_mmio;
- char *xl_card_name;
+ const char *xl_card_name;
struct pci_dev *pdev ;
spinlock_t xl_lock ;
u8 __iomem *olympic_mmio;
u8 __iomem *olympic_lap;
struct pci_dev *pdev ;
- char *olympic_card_name ;
+ const char *olympic_card_name;
spinlock_t olympic_lock ;
if (!dev)
return -EINVAL;
- if (netif_running(dev))
- tulip_down(dev);
+ if (!netif_running(dev))
+ goto save_state;
+
+ tulip_down(dev);
netif_device_detach(dev);
free_irq(dev->irq, dev);
+save_state:
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ if (!netif_running(dev))
+ return 0;
+
if ((retval = pci_enable_device(pdev))) {
printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
return retval;
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &uli526x_poll;
+#endif
spin_lock_init(&db->lock);
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
- spin_unlock_irqrestore(&db->lock, flags);
+ /* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
+ spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+ /* ISR grabs the irqsave lock, so this should be safe */
+ uli526x_interrupt(dev->irq, dev);
+}
+#endif
/*
* Free TX resource after TX complete
skb->dev = ugeth->dev;
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL,
+ dma_map_single(&ugeth->dev->dev,
skb->data,
ugeth->ug_info->uf_info.max_rx_buf_length +
UCC_GETH_RX_DATA_BUF_ALIGNMENT,
continue;
for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) {
if (ugeth->tx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
(in_be32((u32 __iomem *)bd) &
BD_LENGTH_MASK),
bd = ugeth->p_rx_bd_ring[i];
for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) {
if (ugeth->rx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
ugeth->ug_info->
uf_info.max_rx_buf_length +
/* set up the buffer descriptor */
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE));
+ dma_map_single(&ugeth->dev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE));
/* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */
"tx-frames-ok",
"tx-excessive-differ-frames",
"tx-256-511-frames",
+ "tx-512-1023-frames",
"tx-1024-1518-frames",
"tx-jumbo-frames",
};
buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX)
- memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
+ memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
ETH_GSTRING_LEN);
}
// Belkin F5D5055
USB_DEVICE(0x050d, 0x5055),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // Apple USB Ethernet Adapter
+ USB_DEVICE(0x05ac, 0x1402),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
- *((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
+ if (catc->is_f5u011)
+ *(__be16 *)tx_buf = cpu_to_be16(skb->len);
+ else
+ *(__le16 *)tx_buf = cpu_to_le16(skb->len);
skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
catc->tx_ptr += skb->len + 2;
/*-------------------------------------------------------------------------*/
#ifndef HAVE_HARDWARE
-#error You need to configure some hardware for this driver
+#warning You need to configure some hardware for this driver
#endif
/*
dev_dbg(&info->control->dev,
"rndis response error, code %d\n", retval);
}
- msleep(2);
+ msleep(20);
}
dev_dbg(&info->control->dev, "rndis response timeout\n");
return -ETIMEDOUT;
struct rndis_set_c *set_c;
struct rndis_halt *halt;
} u;
- u32 tmp, phym_unspec;
- __le32 *phym;
+ u32 tmp;
+ __le32 phym_unspec, *phym;
int reply_len;
unsigned char *bp;
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
+ /* For cleaning up after transmission. */
+ struct tasklet_struct tasklet;
+
/* Receive & send queues. */
struct sk_buff_head recv;
struct sk_buff_head send;
/* Suppress further interrupts. */
svq->vq_ops->disable_cb(svq);
+
/* We were waiting for more output buffers. */
netif_wake_queue(vi->dev);
+
+ /* Make sure we re-xmit last_xmit_skb: if there are no more packets
+ * queued, start_xmit won't be called. */
+ tasklet_schedule(&vi->tasklet);
}
static void receive_skb(struct net_device *dev, struct sk_buff *skb,
return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
}
+static void xmit_tasklet(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock_bh(vi->dev);
+ if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) {
+ vi->svq->vq_ops->kick(vi->svq);
+ vi->last_xmit_skb = NULL;
+ }
+ netif_tx_unlock_bh(vi->dev);
+}
+
static int start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
free_old_xmit_skbs(vi);
/* If we has a buffer left over from last time, send it now. */
- if (vi->last_xmit_skb) {
+ if (unlikely(vi->last_xmit_skb)) {
if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
/* Drop this skb: we only queue one. */
vi->dev->stats.tx_dropped++;
kfree_skb(skb);
+ skb = NULL;
goto stop_queue;
}
vi->last_xmit_skb = NULL;
}
/* Put new one in send queue and do transmit */
- __skb_queue_head(&vi->send, skb);
- if (xmit_skb(vi, skb) != 0) {
- vi->last_xmit_skb = skb;
- goto stop_queue;
+ if (likely(skb)) {
+ __skb_queue_head(&vi->send, skb);
+ if (xmit_skb(vi, skb) != 0) {
+ vi->last_xmit_skb = skb;
+ skb = NULL;
+ goto stop_queue;
+ }
}
done:
vi->svq->vq_ops->kick(vi->svq);
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
+ tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
kfree_skb(skb);
vi->num--;
}
- while ((skb = __skb_dequeue(&vi->send)) != NULL)
- kfree_skb(skb);
+ __skb_queue_purge(&vi->send);
BUG_ON(vi->num != 0);
#undef DEBUG_LINK
-static struct hdlc_proto *first_proto = NULL;
-
+static struct hdlc_proto *first_proto;
static int hdlc_change_mtu(struct net_device *dev, int new_mtu)
{
void register_hdlc_protocol(struct hdlc_proto *proto)
{
+ rtnl_lock();
proto->next = first_proto;
first_proto = proto;
+ rtnl_unlock();
}
void unregister_hdlc_protocol(struct hdlc_proto *proto)
{
- struct hdlc_proto **p = &first_proto;
- while (*p) {
- if (*p == proto) {
- *p = proto->next;
- return;
- }
+ struct hdlc_proto **p;
+
+ rtnl_lock();
+ p = &first_proto;
+ while (*p != proto) {
+ BUG_ON(!*p);
p = &((*p)->next);
}
+ *p = proto->next;
+ rtnl_unlock();
}
cisco_proto settings;
struct timer_list timer;
+ spinlock_t lock;
unsigned long last_poll;
int up;
int request_sent;
{
struct net_device *dev = skb->dev;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
struct hdlc_header *data = (struct hdlc_header*)skb->data;
struct cisco_packet *cisco_data;
struct in_device *in_dev;
goto rx_error;
case CISCO_KEEPALIVE_REQ:
- state(hdlc)->rxseq = ntohl(cisco_data->par1);
- if (state(hdlc)->request_sent &&
- ntohl(cisco_data->par2) == state(hdlc)->txseq) {
- state(hdlc)->last_poll = jiffies;
- if (!state(hdlc)->up) {
+ spin_lock(&st->lock);
+ st->rxseq = ntohl(cisco_data->par1);
+ if (st->request_sent &&
+ ntohl(cisco_data->par2) == st->txseq) {
+ st->last_poll = jiffies;
+ if (!st->up) {
u32 sec, min, hrs, days;
sec = ntohl(cisco_data->time) / 1000;
min = sec / 60; sec -= min * 60;
days = hrs / 24; hrs -= days * 24;
printk(KERN_INFO "%s: Link up (peer "
"uptime %ud%uh%um%us)\n",
- dev->name, days, hrs,
- min, sec);
+ dev->name, days, hrs, min, sec);
netif_dormant_off(dev);
- state(hdlc)->up = 1;
+ st->up = 1;
}
}
+ spin_unlock(&st->lock);
dev_kfree_skb_any(skb);
return NET_RX_SUCCESS;
{
struct net_device *dev = (struct net_device *)arg;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
- if (state(hdlc)->up &&
- time_after(jiffies, state(hdlc)->last_poll +
- state(hdlc)->settings.timeout * HZ)) {
- state(hdlc)->up = 0;
+ spin_lock(&st->lock);
+ if (st->up &&
+ time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
+ st->up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
netif_dormant_on(dev);
}
- cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
- htonl(++state(hdlc)->txseq),
- htonl(state(hdlc)->rxseq));
- state(hdlc)->request_sent = 1;
- state(hdlc)->timer.expires = jiffies +
- state(hdlc)->settings.interval * HZ;
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = arg;
- add_timer(&state(hdlc)->timer);
+ cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
+ htonl(st->rxseq));
+ st->request_sent = 1;
+ spin_unlock(&st->lock);
+
+ st->timer.expires = jiffies + st->settings.interval * HZ;
+ st->timer.function = cisco_timer;
+ st->timer.data = arg;
+ add_timer(&st->timer);
}
static void cisco_start(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
- state(hdlc)->txseq = state(hdlc)->rxseq = 0;
-
- init_timer(&state(hdlc)->timer);
- state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = (unsigned long)dev;
- add_timer(&state(hdlc)->timer);
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&st->lock, flags);
+ st->up = 0;
+ st->request_sent = 0;
+ st->txseq = st->rxseq = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
+
+ init_timer(&st->timer);
+ st->timer.expires = jiffies + HZ; /* First poll after 1 s */
+ st->timer.function = cisco_timer;
+ st->timer.data = (unsigned long)dev;
+ add_timer(&st->timer);
}
static void cisco_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- del_timer_sync(&state(hdlc)->timer);
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
+
+ del_timer_sync(&st->timer);
+
+ spin_lock_irqsave(&st->lock, flags);
netif_dormant_on(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
+ st->up = 0;
+ st->request_sent = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
}
return result;
memcpy(&state(hdlc)->settings, &new_settings, size);
+ spin_lock_init(&state(hdlc)->lock);
dev->hard_start_xmit = hdlc->xmit;
dev->header_ops = &cisco_header_ops;
dev->type = ARPHRD_CISCO;
dev->irq = ethdev->irq;
dev->base_addr = ethdev->base_addr;
dev->wireless_data = ethdev->wireless_data;
+ SET_NETDEV_DEV(dev, ethdev->dev.parent);
memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
err = register_netdev(dev);
if (err<0) {
static int waitbusy (struct airo_info *ai) {
int delay = 0;
- while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+ while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
udelay (10);
if ((++delay % 20) == 0)
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
spin_lock(&sc->rxbuflock);
do {
+ rxs.flag = 0;
+
if (unlikely(list_empty(&sc->rxbuf))) {
ATH5K_WARN(sc, "empty rx buf pool\n");
break;
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
if (rx_status->rx_status_1 &
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
}
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
if (rx_status->rx_status_1 &
AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_err->rx_error_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
}
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/timer.h>
+#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/delay.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#include <linux/byteorder/generic.h>
#include <linux/crc32.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
config B43
tristate "Broadcom 43xx wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
struct ieee80211_tx_control beacon_txctl;
bool beacon0_uploaded;
bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues.
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
config B43LEGACY
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
- struct b43legacy_wl *wl = dev->wl;
struct b43legacy_phy *phy = &dev->phy;
u32 macctl;
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
- mutex_unlock(&wl->mutex);
- /* Must unlock as it would otherwise deadlock. No races here.
- * Cancel possibly pending workqueues. */
- cancel_work_sync(&dev->restart_work);
- mutex_lock(&wl->mutex);
-
b43legacy_leds_exit(dev);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
}
}
out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43legacy_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43legacy_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
}
printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
-#ifndef PRISM2_NO_PROCFS_DEBUG
- create_proc_read_entry("registers", 0, local->proc,
- prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
hostap_init_data(local);
return dev;
netif_carrier_off(local->ddev);
}
hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+ create_proc_read_entry("registers", 0, local->proc,
+ prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
hostap_init_ap_proc(local);
return 0;
}
priv->ieee->iw_mode == IW_MODE_ADHOC &&
priv->config & CFG_ADHOC_CREATE &&
priv->config & CFG_STATIC_ESSID &&
- priv->config & CFG_STATIC_CHANNEL &&
- !list_empty(&priv->ieee->network_free_list)) {
+ priv->config & CFG_STATIC_CHANNEL) {
+ /* Use oldest network if the free list is empty */
+ if (list_empty(&priv->ieee->network_free_list)) {
+ struct ieee80211_network *oldest = NULL;
+ struct ieee80211_network *target;
+ DECLARE_MAC_BUF(mac);
+
+ list_for_each_entry(target, &priv->ieee->network_list, list) {
+ if ((oldest == NULL) ||
+ (target->last_scanned < oldest->last_scanned))
+ oldest = target;
+ }
+
+ /* If there are no more slots, expire the oldest */
+ list_del(&oldest->list);
+ target = oldest;
+ IPW_DEBUG_ASSOC("Expired '%s' (%s) from "
+ "network list.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ print_mac(mac, target->bssid));
+ list_add_tail(&target->list,
+ &priv->ieee->network_free_list);
+ }
+
element = priv->ieee->network_free_list.next;
network = list_entry(element, struct ieee80211_network, list);
ipw_adhoc_create(priv, network);
priv->prom_net_dev->hard_start_xmit = ipw_prom_hard_start_xmit;
priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+ SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
rc = register_netdev(priv->prom_net_dev);
if (rc) {
/* Higher rate not available, use the original */
} else {
- new_rate = rate;
break;
}
}
* 2) Not just finishing up a search
* 3) Allowing a new search
*/
- if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
if (tlv_type != TLV_TYPE_BCNMISS)
tlv->freq = freq;
- /* The command header, the event mask, and the one TLV */
- events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv));
+ /* The command header, the action, the event mask, and one TLV */
+ events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv));
ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events);
return ret;
}
-static void lbs_ethtool_get_stats(struct net_device * dev,
- struct ethtool_stats * stats, u64 * data)
+static void lbs_ethtool_get_stats(struct net_device *dev,
+ struct ethtool_stats *stats, uint64_t *data)
{
struct lbs_private *priv = dev->priv;
struct cmd_ds_mesh_access mesh_access;
lbs_deb_enter(LBS_DEB_ETHTOOL);
/* Get Mesh Statistics */
- ret = lbs_prepare_and_send_command(priv,
- CMD_MESH_ACCESS, CMD_ACT_MESH_GET_STATS,
- CMD_OPTION_WAITFORRSP, 0, &mesh_access);
+ ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
- if (ret)
+ if (ret) {
+ memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
return;
+ }
priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
lbs_deb_enter(LBS_DEB_ETHTOOL);
}
-static int lbs_ethtool_get_sset_count(struct net_device * dev, int sset)
+static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- switch (sset) {
- case ETH_SS_STATS:
+ struct lbs_private *priv = dev->priv;
+
+ if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
- default:
- return -EOPNOTSUPP;
- }
+
+ return -EOPNOTSUPP;
}
static void lbs_ethtool_get_strings(struct net_device *dev,
- u32 stringset,
- u8 * s)
+ uint32_t stringset, uint8_t *s)
{
int i;
priv->nr_retries = 0;
} else {
priv->cur_cmd = NULL;
+ priv->dnld_sent = DNLD_RES_RECEIVED;
lbs_pr_info("requeueing command %x due to timeout (#%d)\n",
le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries);
rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
rtap_dev->set_multicast_list = lbs_set_multicast_list;
rtap_dev->priv = priv;
+ SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
ret = register_netdev(rtap_dev);
if (ret) {
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
/* Version 2 devices (3887) */
+ {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
#define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b)
#define OID_802_11_ADD_KEY ccpu2(0x0d01011d)
#define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e)
+#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f)
#define OID_802_11_PMKID ccpu2(0x0d010123)
#define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203)
#define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204)
__le32 value_length;
} __attribute__((packed));
+struct ndis_80211_assoc_info {
+ __le32 length;
+ __le16 req_ies;
+ struct req_ie {
+ __le16 capa;
+ __le16 listen_interval;
+ u8 cur_ap_address[6];
+ } req_ie;
+ __le32 req_ie_length;
+ __le32 offset_req_ies;
+ __le16 resp_ies;
+ struct resp_ie {
+ __le16 capa;
+ __le16 status_code;
+ __le16 assoc_id;
+ } resp_ie;
+ __le32 resp_ie_length;
+ __le32 offset_resp_ies;
+} __attribute__((packed));
+
/* these have to match what is in wpa_supplicant */
enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
return ret;
}
+static int get_association_info(struct usbnet *usbdev,
+ struct ndis_80211_assoc_info *info, int len)
+{
+ return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION,
+ info, &len);
+}
static int is_associated(struct usbnet *usbdev)
{
struct usbnet *usbdev = priv->usbdev;
union iwreq_data evt;
unsigned char bssid[ETH_ALEN];
- int ret;
+ struct ndis_80211_assoc_info *info;
+ int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
+ int ret, offset;
if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) {
- ret = get_bssid(usbdev, bssid);
+ info = kzalloc(assoc_size, GFP_KERNEL);
+ if (!info)
+ goto get_bssid;
+
+ /* Get association info IEs from device and send them back to
+ * userspace. */
+ ret = get_association_info(usbdev, info, assoc_size);
+ if (!ret) {
+ evt.data.length = le32_to_cpu(info->req_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_req_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCREQIE, &evt,
+ (char *)info + offset);
+ }
+
+ evt.data.length = le32_to_cpu(info->resp_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_resp_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCRESPIE, &evt,
+ (char *)info + offset);
+ }
+ }
+
+ kfree(info);
+get_bssid:
+ ret = get_bssid(usbdev, bssid);
if (!ret) {
evt.data.flags = 0;
evt.data.length = 0;
else if (priv->param_power_save > 2)
priv->param_power_save = 2;
+ if (priv->param_power_output < 0)
+ priv->param_power_output = 0;
+ else if (priv->param_power_output > 3)
+ priv->param_power_output = 3;
+
if (priv->param_roamtrigger < -80)
priv->param_roamtrigger = -80;
else if (priv->param_roamtrigger > -60)
return DEFAULT_RSSI;
}
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+ link->ant.rssi_ant = 0;
+}
+
static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
enum antenna ant)
{
*/
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
rt2x00lib_reset_link_tuner(rt2x00dev);
+ rt2x00_reset_link_ant_rssi(&rt2x00dev->link);
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
}
* Update TX statistics.
*/
rt2x00dev->link.qual.tx_success += success;
- rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
+ rt2x00dev->link.qual.tx_failed += fail;
/*
* Initialize TX status
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
write_grf5101(dev, 0x0B, chan);
write_grf5101(dev, 0x07, 0x1000);
- grf5101_write_phy_antenna(dev, chan);
+ grf5101_write_phy_antenna(dev, channel);
}
static void grf5101_rf_stop(struct ieee80211_hw *dev)
struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
- int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+ int channel = conf ?
+ ieee80211_frequency_to_channel(conf->channel->center_freq) : 1;
unsigned int chan_idx = channel - 1;
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
u32 chan = max2820_chan[chan_idx];
* sa2400, for MAXIM we do this directly from BB */
rtl8180_write_phy(dev, 3, txpw);
- max2820_write_phy_antenna(dev, chan);
+ max2820_write_phy_antenna(dev, channel);
write_max2820(dev, 3, chan);
}
write_sa2400(dev, 7, txpw);
- sa2400_write_phy_antenna(dev, chan);
+ sa2400_write_phy_antenna(dev, channel);
write_sa2400(dev, 0, chan);
write_sa2400(dev, 1, 0xbb50);
u8 data[4];
struct usb_ctrlrequest dr;
} *buf;
+ int rc;
buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
if (!buf)
usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
(unsigned char *)dr, buf, len,
rtl8187_iowrite_async_cb, buf);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ kfree(buf);
+ usb_free_urb(urb);
+ }
}
static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
struct urb *urb;
__le16 rts_dur = 0;
u32 flags;
+ int rc;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
info->dev = dev;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
hdr, skb->len, rtl8187_tx_cb, skb);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ usb_free_urb(urb);
+ kfree_skb(skb);
+ }
return 0;
}
u16 int_status;
struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
- int_status = le16_to_cpu(*(u16 *)(mac->intr_buffer+4));
+ int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
if (int_status & INT_CFG_NEXT_BCN) {
if (net_ratelimit())
dev_dbg_f(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
ZD_ASSERT(in_interrupt());
spin_lock(&intr->lock);
- int_num = le16_to_cpu(*(u16 *)(urb->transfer_buffer+2));
+ int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
if (int_num == CR_INTERRUPT) {
struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
memcpy(&mac->intr_buffer, urb->transfer_buffer,
work_done++;
}
- while ((skb = __skb_dequeue(&errq)))
- kfree_skb(skb);
+ __skb_queue_purge(&errq);
work_done -= handle_incoming_queue(dev, &rxq);
}
}
- while ((skb = __skb_dequeue(&free_list)) != NULL)
- dev_kfree_skb(skb);
+ __skb_queue_purge(&free_list);
spin_unlock_bh(&np->rx_lock);
}
};
static struct i2c_driver_device i2c_devices[] = {
- { "dallas,ds1374", "rtc-ds1374" },
};
static int of_find_i2c_driver(struct device_node *node,
int pci_hp_register (struct hotplug_slot *slot)
{
int result;
+ struct hotplug_slot *tmp;
if (slot == NULL)
return -ENODEV;
return -EINVAL;
}
- /* this can fail if we have already registered a slot with the same name */
+ /* Check if we have already registered a slot with the same name. */
+ tmp = get_slot_from_name(slot->name);
+ if (tmp)
+ return -EEXIST;
+
slot->kobj.kset = pci_hotplug_slots_kset;
result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
"%s", slot->name);
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ unsigned int no_cmd_complete:1;
};
#define INT_BUTTON_IGNORE 0
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define EMI_PRSN 0x00020000
+#define NO_CMD_CMPL_SUP 0x00040000
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+ extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
slot->hp_slot, slot->number, ctrl->slot_device_offset);
retval = pci_hp_register(hotplug_slot);
if (retval) {
- err ("pci_hp_register failed with error %d\n", retval);
+ err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'pciehp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
/* create additional sysfs entries */
return 0;
}
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* Attention Button Change */
dbg("pciehp: Attention button interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
return 0;
}
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
{
- struct slot *p_slot;
u8 getstatus;
u32 event_type;
/* Switch Change */
dbg("pciehp: Switch interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
if (getstatus) {
/*
* Switch opened
return 1;
}
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
u8 presence_save;
/* Presence Change */
dbg("pciehp: Presence/Notify input change.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/* Switch is open, assume a presence change
* Save the presence state
*/
return 1;
}
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* power fault */
dbg("pciehp: Power fault interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
/*
* power fault Cleared
*/
info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
- info("power fault bit %x set\n", hp_slot);
+ info("power fault bit %x set\n", 0);
}
queue_interrupt_event(p_slot, event_type);
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
pslot->hpc_ops->green_led_off(pslot);
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
free_irq(ctrl->pci_dev->irq, ctrl);
}
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+ u16 slot_status;
+ int timeout = 1000;
+
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ for (timeout = 1000; timeout > 0; timeout -= 100) {
+ msleep(100);
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ }
+ return 0; /* timeout */
+
+completed:
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
{
int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
- rc = wait_event_interruptible_timeout(ctrl->queue,
+ if (poll)
+ rc = pcie_poll_cmd(ctrl);
+ else
+ rc = wait_event_interruptible_timeout(ctrl->queue,
!ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
goto out;
}
- if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
- /* After 1 sec and CMD_COMPLETED still not set, just
- proceed forward to issue the next command according
- to spec. Just print out the error message */
- dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
- __func__);
+ if (slot_status & CMD_COMPLETED) {
+ if (!ctrl->no_cmd_complete) {
+ /*
+ * After 1 sec and CMD_COMPLETED still not set, just
+ * proceed forward to issue the next command according
+ * to spec. Just print out the error message.
+ */
+ dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+ __func__);
+ } else if (!NO_CMD_CMPL(ctrl)) {
+ /*
+ * This controller semms to notify of command completed
+ * event even though it supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+ "command completed event.\n", __func__);
+ ctrl->no_cmd_complete = 0;
+ } else {
+ dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+ "controller is broken.\n", __func__);
+ }
}
retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
/*
* Wait for command completion.
*/
- if (!retval)
- retval = pcie_wait_cmd(ctrl);
+ if (!retval && !ctrl->no_cmd_complete) {
+ int poll = 0;
+ /*
+ * if hotplug interrupt is not enabled or command
+ * completed interrupt is not enabled, we need to poll
+ * command completed event.
+ */
+ if (!(slot_ctrl & HP_INTR_ENABLE) ||
+ !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+ poll = 1;
+ retval = pcie_wait_cmd(ctrl, poll);
+ }
out:
mutex_unlock(&ctrl->ctrl_lock);
return retval;
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
{
struct controller *ctrl = (struct controller *)dev_id;
u16 detected, intr_loc;
+ struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
wake_up_interruptible(&ctrl->queue);
}
+ if (!(intr_loc & ~CMD_COMPLETED))
+ return IRQ_HANDLED;
+
+ /*
+ * Return without handling events if this handler routine is
+ * called before controller initialization is done. This may
+ * happen if hotplug event or another interrupt that shares
+ * the IRQ with pciehp arrives before slot initialization is
+ * done after interrupt handler is registered.
+ *
+ * FIXME - Need more structural fixes. We need to be ready to
+ * handle the event before installing interrupt handler.
+ */
+ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ if (!p_slot || !p_slot->hpc_ops)
+ return IRQ_HANDLED;
+
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
- pciehp_handle_switch_change(0, ctrl);
+ pciehp_handle_switch_change(p_slot);
/* Check Attention Button Pressed */
if (intr_loc & ATTN_BUTTN_PRESSED)
- pciehp_handle_attention_button(0, ctrl);
+ pciehp_handle_attention_button(p_slot);
/* Check Presence Detect Changed */
if (intr_loc & PRSN_DETECT_CHANGED)
- pciehp_handle_presence_change(0, ctrl);
+ pciehp_handle_presence_change(p_slot);
/* Check Power Fault Detected */
if (intr_loc & PWR_FAULT_DETECTED)
- pciehp_handle_power_fault(0, ctrl);
+ pciehp_handle_power_fault(p_slot);
return IRQ_HANDLED;
}
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
+ /* Clear all remaining event bits in Slot Status register */
+ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+ err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+ return -1;
+ }
+
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
err("%s: Cannot mask hotplug interrupt enable\n", __func__);
{
u16 cmd, mask;
- /*
- * We need to clear all events before enabling hotplug interrupt
- * notification mechanism in order for hotplug controler to
- * generate interrupts.
- */
- if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
- err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
- return -1;
- }
-
cmd = PRSN_DETECT_ENABLE;
if (ATTN_BUTTN(ctrl))
cmd |= ATTN_BUTTN_ENABLE;
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
+ dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, ®16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, ®16);
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
+ /*
+ * Controller doesn't notify of command completion if the "No
+ * Command Completed Support" bit is set in Slot Capability
+ * register or the controller supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ if (NO_CMD_CMPL(ctrl) ||
+ !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+ ctrl->no_cmd_complete = 1;
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
#include "rpadlpar.h"
#define DLPAR_KOBJ_NAME "control"
-#define ADD_SLOT_ATTR_NAME "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
#define MAX_DRC_NAME_LEN 64
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'shpchp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
pdev->link_state = NULL;
}
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+ struct pci_dev *child_dev;
+ int child_pos;
+
+ /*
+ * Some functions in a slot might not all be PCIE functions, very
+ * strange. Disable ASPM for the whole slot
+ */
+ list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+ child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ if (!child_pos)
+ return -EINVAL;
+ }
+ return 0;
+}
+
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
* It is called after the pcie and its children devices are scaned.
if (list_empty(&pdev->subordinate->devices))
goto out;
+ if (pcie_aspm_sanity_check(pdev))
+ goto out;
+
mutex_lock(&aspm_lock);
link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
},
{},
};
+MODULE_DEVICE_TABLE(of, electra_cf_match);
static struct of_platform_driver electra_cf_driver = {
.name = (char *)driver_name,
pci_name(pdev), i,
(unsigned long long) pci_start,
(unsigned long long) pci_end);
- res->flags = 0;
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
- if (res->flags & IORESOURCE_UNSET)
+ if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
continue;
reserve_range(dev, res->start, res->end, 0);
{
int rc = 0;
- psy->dev = device_create(power_supply_class, parent, 0,
- "%s", psy->name);
+ psy->dev = device_create_drvdata(power_supply_class, parent, 0,
+ psy, "%s", psy->name);
if (IS_ERR(psy->dev)) {
rc = PTR_ERR(psy->dev);
goto dev_create_failed;
}
- dev_set_drvdata(psy->dev, psy);
-
INIT_WORK(&psy->changed_work, power_supply_changed_work);
rc = power_supply_create_attrs(psy);
dev_dbg(dev, "uevent\n");
- if (!psy) {
+ if (!psy || !psy->dev) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
help
If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+config RTC_DRV_PPC
+ tristate "PowerPC machine dependent RTC support"
+ depends on PPC_MERGE
+ help
+ The PowerPC kernel has machine-specific functions for accessing
+ the RTC. This exposes that functionality through the generic RTC
+ class.
+
endif # RTC_CLASS
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
#define DS1374_REG_TCR 0x09 /* Trickle Charge */
static const struct i2c_device_id ds1374_id[] = {
- { "rtc-ds1374", 0 },
+ { "ds1374", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds1374_id);
--- /dev/null
+/*
+ * RTC driver for ppc_md RTC functions
+ *
+ * © 2007 Red Hat, Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+
+static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ ppc_md.get_rtc_time(tm);
+ return 0;
+}
+
+static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return ppc_md.set_rtc_time(tm);
+}
+
+static const struct rtc_class_ops ppc_rtc_ops = {
+ .set_time = ppc_rtc_set_time,
+ .read_time = ppc_rtc_read_time,
+};
+
+static struct rtc_device *rtc;
+static struct platform_device *ppc_rtc_pdev;
+
+static int __init ppc_rtc_init(void)
+{
+ if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time)
+ return -ENODEV;
+
+ ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0);
+ if (IS_ERR(ppc_rtc_pdev))
+ return PTR_ERR(ppc_rtc_pdev);
+
+ rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev,
+ &ppc_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ platform_device_unregister(ppc_rtc_pdev);
+ return PTR_ERR(rtc);
+ }
+
+ return 0;
+}
+
+static void __exit ppc_rtc_exit(void)
+{
+ rtc_device_unregister(rtc);
+ platform_device_unregister(ppc_rtc_pdev);
+}
+
+module_init(ppc_rtc_init);
+module_exit(ppc_rtc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Generic RTC class driver for PowerPC");
*/
static wait_queue_head_t dasd_init_waitq;
static wait_queue_head_t dasd_flush_wq;
+static wait_queue_head_t generic_waitq;
/*
* Allocate memory for a new device structure.
struct list_head *l, *n;
struct dasd_ccw_req *cqr;
struct dasd_block *block;
+ void (*callback)(struct dasd_ccw_req *, void *data);
+ void *callback_data;
list_for_each_safe(l, n, final_queue) {
cqr = list_entry(l, struct dasd_ccw_req, devlist);
list_del_init(&cqr->devlist);
block = cqr->block;
+ callback = cqr->callback;
+ callback_data = cqr->callback_data;
if (block)
spin_lock_bh(&block->queue_lock);
switch (cqr->status) {
BUG();
}
if (cqr->callback != NULL)
- (cqr->callback)(cqr, cqr->callback_data);
+ (callback)(cqr, callback_data);
if (block)
spin_unlock_bh(&block->queue_lock);
}
*/
int dasd_sleep_on(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
*/
int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr));
+ rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr));
if (rc == -ERESTARTSYS) {
dasd_cancel_req(cqr);
/* wait (non-interruptible) for final status */
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
}
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
return rc;
int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
return rc;
}
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
cqr->status = DASD_CQR_QUEUED;
list_add(&cqr->devlist, &device->ccw_queue);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
init_waitqueue_head(&dasd_init_waitq);
init_waitqueue_head(&dasd_flush_wq);
+ init_waitqueue_head(&generic_waitq);
/* register 'common' DASD debug area, used for all DBF_XXX calls */
dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long));
struct raw3270_request *rq)
{
unsigned long flags;
- wait_queue_head_t wq;
int rc;
#ifdef CONFIG_TN3270_CONSOLE
return rq->rc;
}
#endif
- init_waitqueue_head(&wq);
rq->callback = raw3270_wake_init;
- rq->callback_data = &wq;
+ rq->callback_data = &raw3270_wait_queue;
spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
rc = __raw3270_start(rp, view, rq);
spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
if (rc)
return rc;
/* Now wait for the completion. */
- rc = wait_event_interruptible(wq, raw3270_request_final(rq));
+ rc = wait_event_interruptible(raw3270_wait_queue,
+ raw3270_request_final(rq));
if (rc == -ERESTARTSYS) { /* Interrupted by a signal. */
raw3270_halt_io(view->dev, rq);
/* No wait for the halt to complete. */
- wait_event(wq, raw3270_request_final(rq));
+ wait_event(raw3270_wait_queue, raw3270_request_final(rq));
return -ERESTARTSYS;
}
return rq->rc;
put_online_cpus();
}
-static void sclp_cpu_change_notify(struct work_struct *work)
+static void __ref sclp_cpu_change_notify(struct work_struct *work)
{
smp_rescan_cpus();
}
/* Number of requests in outqueue */
static int sclp_vt220_outqueue_count;
-/* Wait queue used to delay write requests while we've run out of buffers */
-static wait_queue_head_t sclp_vt220_waitq;
-
/* Timer used for delaying write requests to merge subsequent messages into
* a single buffer */
static struct timer_list sclp_vt220_timer;
} while (request && __sclp_vt220_emit(request));
if (request == NULL && sclp_vt220_flush_later)
sclp_vt220_emit_current();
- wake_up(&sclp_vt220_waitq);
/* Check if the tty needs a wake up call */
if (sclp_vt220_tty != NULL) {
tty_wakeup(sclp_vt220_tty);
*/
static int
__sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
- int convertlf, int may_schedule)
+ int convertlf, int may_fail)
{
unsigned long flags;
void *page;
overall_written = 0;
spin_lock_irqsave(&sclp_vt220_lock, flags);
do {
- /* Create a sclp output buffer if none exists yet */
+ /* Create an sclp output buffer if none exists yet */
if (sclp_vt220_current_request == NULL) {
while (list_empty(&sclp_vt220_empty)) {
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
- if (in_interrupt() || !may_schedule)
- sclp_sync_wait();
+ if (may_fail)
+ goto out;
else
- wait_event(sclp_vt220_waitq,
- !list_empty(&sclp_vt220_empty));
+ sclp_sync_wait();
spin_lock_irqsave(&sclp_vt220_lock, flags);
}
page = (void *) sclp_vt220_empty.next;
add_timer(&sclp_vt220_timer);
}
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+out:
return overall_written;
}
* character to the tty device. If the kernel uses this routine,
* it must call the flush_chars() routine (if defined) when it is
* done stuffing characters into the driver.
- *
- * NOTE: include/linux/tty_driver.h specifies that a character should be
- * ignored if there is no room in the queue. This driver implements a different
- * semantic in that it will block when there is no more room left.
- *
- * FIXME: putchar can currently be called from BH and other non blocking
- * handlers so this semantic isn't a good idea.
*/
static int
sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
{
- __sclp_vt220_write(&ch, 1, 0, 0, 1);
- return 1;
+ return __sclp_vt220_write(&ch, 1, 0, 0, 1);
}
/*
spin_lock_init(&sclp_vt220_lock);
INIT_LIST_HEAD(&sclp_vt220_empty);
INIT_LIST_HEAD(&sclp_vt220_outqueue);
- init_waitqueue_head(&sclp_vt220_waitq);
init_timer(&sclp_vt220_timer);
sclp_vt220_current_request = NULL;
sclp_vt220_buffered_chars = 0;
/* Request queue. */
struct list_head req_queue;
+ /* Request wait queue. */
+ wait_queue_head_t wait_queue;
+
/* Each tape device has (currently) two minor numbers. */
int first_minor;
tapeblock_end_request(req, -EIO);
continue;
}
+ blkdev_dequeue_request(req);
+ nr_queued++;
spin_unlock_irq(&device->blk_data.request_queue_lock);
rc = tapeblock_start_request(device, req);
spin_lock_irq(&device->blk_data.request_queue_lock);
- blkdev_dequeue_request(req);
- nr_queued++;
}
spin_unlock_irq(&device->blk_data.request_queue_lock);
atomic_set(&device->blk_data.requeue_scheduled, 0);
INIT_LIST_HEAD(&device->req_queue);
INIT_LIST_HEAD(&device->node);
init_waitqueue_head(&device->state_change_wq);
+ init_waitqueue_head(&device->wait_queue);
device->tape_state = TS_INIT;
device->medium_state = MS_UNKNOWN;
*device->modeset_byte = 0;
int
tape_do_io(struct tape_device *device, struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
/* Add request to request queue and try to start it. */
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- wait_event(wq, (request->callback == NULL));
+ wait_event(device->wait_queue, (request->callback == NULL));
/* Get rc from request */
return request->rc;
}
tape_do_io_interruptible(struct tape_device *device,
struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up_interruptible;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- rc = wait_event_interruptible(wq, (request->callback == NULL));
+ rc = wait_event_interruptible(device->wait_queue,
+ (request->callback == NULL));
if (rc != -ERESTARTSYS)
/* Request finished normally. */
return request->rc;
/* Wait for the interrupt that acknowledges the halt. */
do {
rc = wait_event_interruptible(
- wq,
+ device->wait_queue,
(request->callback == NULL)
);
} while (rc == -ERESTARTSYS);
device_unregister(dev);
return ret;
}
- priv->class_device = device_create(vmlogrdr_class, dev,
- MKDEV(vmlogrdr_major,
- priv->minor_num),
- "%s", dev->bus_id);
+ priv->class_device = device_create_drvdata(vmlogrdr_class, dev,
+ MKDEV(vmlogrdr_major,
+ priv->minor_num),
+ priv, "%s", dev->bus_id);
if (IS_ERR(priv->class_device)) {
ret = PTR_ERR(priv->class_device);
priv->class_device=NULL;
device_unregister(dev);
return ret;
}
- dev->driver_data = priv;
priv->device = dev;
return 0;
}
*/
static void *kvm_devices;
-/*
- * Unique numbering for kvm devices.
- */
-static unsigned int dev_index;
-
struct kvm_device {
struct virtio_device vdev;
struct kvm_device_desc *desc;
+ desc->config_len;
}
-/*
- * This tests (and acknowleges) a feature bit.
- */
-static bool kvm_feature(struct virtio_device *vdev, unsigned fbit)
+/* This gets the device's feature bits. */
+static u32 kvm_get_features(struct virtio_device *vdev)
{
+ unsigned int i;
+ u32 features = 0;
struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
- u8 *features;
+ u8 *in_features = kvm_vq_features(desc);
- if (fbit / 8 > desc->feature_len)
- return false;
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++)
+ if (in_features[i / 8] & (1 << (i % 8)))
+ features |= (1 << i);
+ return features;
+}
- features = kvm_vq_features(desc);
- if (!(features[fbit / 8] & (1 << (fbit % 8))))
- return false;
+static void kvm_set_features(struct virtio_device *vdev, u32 features)
+{
+ unsigned int i;
+ struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
+ /* Second half of bitmap is features we accept. */
+ u8 *out_features = kvm_vq_features(desc) + desc->feature_len;
- /*
- * We set the matching bit in the other half of the bitmap to tell the
- * Host we want to use this feature.
- */
- features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
- return true;
+ memset(out_features, 0, desc->feature_len);
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
+ if (features & (1 << i))
+ out_features[i / 8] |= (1 << (i % 8));
+ }
}
/*
* The config ops structure as defined by virtio config
*/
static struct virtio_config_ops kvm_vq_configspace_ops = {
- .feature = kvm_feature,
+ .get_features = kvm_get_features,
+ .set_features = kvm_set_features,
.get = kvm_get,
.set = kvm_set,
.get_status = kvm_get_status,
* adds a new device and register it with virtio
* appropriate drivers are loaded by the device model
*/
-static void add_kvm_device(struct kvm_device_desc *d)
+static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset)
{
struct kvm_device *kdev;
kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
if (!kdev) {
- printk(KERN_EMERG "Cannot allocate kvm dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n",
+ offset, d->type);
return;
}
kdev->vdev.dev.parent = &kvm_root;
- kdev->vdev.index = dev_index++;
kdev->vdev.id.device = d->type;
kdev->vdev.config = &kvm_vq_configspace_ops;
kdev->desc = d;
if (register_virtio_device(&kdev->vdev) != 0) {
- printk(KERN_ERR "Failed to register kvm device %u\n",
- kdev->vdev.index);
+ printk(KERN_ERR "Failed to register kvm device %u type %u\n",
+ offset, d->type);
kfree(kdev);
}
}
if (d->type == 0)
break;
- add_kvm_device(d);
+ add_kvm_device(d, i);
}
}
instances[idx].mode = COMPATIBILITY;
instances[idx].run_length = 0;
instances[idx].run_flag = 0;
- if (!request_region(lpAddr,3, dev_name)) return;
+ if (!request_region(lpAddr,3, bpp_dev_name)) return;
/*
* First, make sure the instance exists. Do this by writing to
if (rc == 0)
return -ENODEV;
- rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops);
+ rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
if (rc < 0)
return rc;
{
unsigned idx;
- unregister_chrdev(BPP_MAJOR, dev_name);
+ unregister_chrdev(BPP_MAJOR, bpp_dev_name);
for (idx = 0; idx < BPP_NO; idx++) {
if (instances[idx].present)
error = 0;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status != 0) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
error = twa_fill_sense(tw_dev, request_id, 1, 1);
} else {
/* Skip ioctl error prints */
/* Check for correct state */
if (tw_dev->state[request_id] != TW_S_POSTED) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
}
/* Check for internal command completion */
- if (tw_dev->srb[request_id] == 0) {
+ if (tw_dev->srb[request_id] == NULL) {
if (request_id != tw_dev->chrdev_request_id) {
if (twa_aen_complete(tw_dev, request_id))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
if (i == ARRAY_SIZE(ports))
return 0;
- if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
return 0;
}
if ((setup_count == 1) && (setup[0].io_port == ports[i]))
continue;
- if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(ports[i], IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
continue;
}
dev->quhd[c] = 0;
}
workreq = dev->quereq[c][dev->quhd[c]];
- if (dev->id[c][scmd_id(workreq)].curr_req == 0) {
+ if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
goto cmd_subp;
ch->minor = minor;
sprintf(ch->name,"ch%d",ch->minor);
- class_dev = device_create(ch_sysfs_class, dev,
- MKDEV(SCSI_CHANGER_MAJOR,ch->minor),
- "s%s", ch->name);
+ class_dev = device_create_drvdata(ch_sysfs_class, dev,
+ MKDEV(SCSI_CHANGER_MAJOR, ch->minor),
+ ch, "s%s", ch->name);
if (IS_ERR(class_dev)) {
printk(KERN_WARNING "ch%d: device_create failed\n",
ch->minor);
if (init)
ch_init_elem(ch);
- dev_set_drvdata(dev, ch);
sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
return 0;
if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) {
printk(KERN_ERR "scsi%d: pci resource invalid\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
mem_base_phy = pci_resource_start(pcidev, index);
if (!mem_base_virt) {
printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
return mem_base_virt;
}
static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba)
{
hba->u.mv.regs = hptiop_map_pci_bar(hba, 0);
- if (hba->u.mv.regs == 0)
+ if (hba->u.mv.regs == NULL)
return -1;
hba->u.mv.mu = hptiop_map_pci_bar(hba, 2);
- if (hba->u.mv.mu == 0) {
+ if (hba->u.mv.mu == NULL) {
iounmap(hba->u.mv.regs);
return -1;
}
static struct hptiop_adapter_ops hptiop_itl_ops = {
.iop_wait_ready = iop_wait_ready_itl,
- .internal_memalloc = 0,
- .internal_memfree = 0,
+ .internal_memalloc = NULL,
+ .internal_memfree = NULL,
.map_pci_bar = hptiop_map_pci_bar_itl,
.unmap_pci_bar = hptiop_unmap_pci_bar_itl,
.enable_intr = hptiop_enable_intr_itl,
del_timer(&evt_struct->timer);
- if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+ if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
evt_struct->cmnd->result = DID_ERROR << 16;
if (evt_struct->done)
evt_struct->done(evt_struct);
VIOSRP_VIOLATES_MAX_XFER = 0x2,
VIOSRP_PARTNER_PANIC = 0x3,
VIOSRP_DEVICE_BUSY = 0x8,
- VIOSRP_ADAPTER_FAIL = 0x10
+ VIOSRP_ADAPTER_FAIL = 0x10,
+ VIOSRP_OK2 = 0x99,
};
struct viosrp_crq {
MODULE_DESCRIPTION("Mac ESP SCSI driver");
MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
module_init(mac_esp_init);
struct device *osst_member;
int err;
- osst_member = device_create(osst_sysfs_class, device, dev, "%s", name);
+ osst_member = device_create_drvdata(osst_sysfs_class, device, dev, STp, "%s", name);
if (IS_ERR(osst_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return PTR_ERR(osst_member);
}
- dev_set_drvdata(osst_member, STp);
err = device_create_file(osst_member, &dev_attr_ADR_rev);
if (err)
goto err_out;
/* Check for room in outstanding command list. */
for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
- ha->outstanding_cmds[cnt] != 0; cnt++);
+ ha->outstanding_cmds[cnt] != NULL; cnt++);
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
status = 1;
case 2:
qla2x00_alloc_fw_dump(ha);
break;
+ case 3:
+ qla2x00_system_error(ha);
+ break;
}
return (count);
}
static void
qla2x00_get_host_port_type(struct Scsi_Host *shost)
{
- scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+ scsi_qla_host_t *ha = shost_priv(shost);
uint32_t port_type = FC_PORTTYPE_UNKNOWN;
+ if (ha->parent) {
+ fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+ return;
+ }
switch (ha->current_topology) {
case ISP_CFG_NL:
port_type = FC_PORTTYPE_LPORT;
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ha->cur_vport_count--;
clear_bit(vha->vp_idx, ha->vp_idx_map);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
kfree(vha->node_name);
kfree(vha->port_name);
#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct semaphore vport_sem; /* Virtual port synchronization */
+ struct mutex vport_lock; /* Virtual port synchronization */
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
extern int qla24xx_abort_target(struct fc_port *, unsigned int);
extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
+extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
static inline void
qla2x00_poll(scsi_qla_host_t *ha)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
ha->isp_ops->intr_handler(0, ha);
+ local_irq_restore(flags);
}
static __inline__ scsi_qla_host_t *
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
- scsi_qla_host_t *vha;
- int i;
/* Setup to process RIO completion. */
handle_cnt = 0;
break;
case MBA_PORT_UPDATE: /* Port database update */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
+
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Check if the Vport has issued a SCR */
+ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+ break;
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
-
- /*
- * In case of a Underrun condition, set both the lscsi
- * status and the completion status to appropriate
- * values.
- */
- if (resid &&
- ((unsigned)(scsi_bufflen(cp) - resid) <
- cp->underflow)) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Mid-layer underflow "
- "detected (%x of %x bytes)...returning "
- "error status.\n", ha->host_no,
- cp->device->channel, cp->device->id,
- cp->device->lun, resid,
- scsi_bufflen(cp)));
-
- cp->result = DID_ERROR << 16 | lscsi_status;
- }
} else {
/*
* If RISC reports underrun and target does not report
ha = dev_id;
reg = &ha->iobase->isp24;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
qla24xx_process_response_queue(ha);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
reg = &ha->iobase->isp24;
status = 0;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
}
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
} while (0);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
}
-#if 0
-
int
qla2x00_system_error(scsi_qla_host_t *ha)
{
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
- if (!IS_FWI2_CAPABLE(ha))
+ if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
return rval;
}
-#endif /* 0 */
-
/**
* qla2x00_set_serdes_params() -
* @ha: HA context
if (mb)
memcpy(mb, mcp->mb, 8 * sizeof(*mb));
if (dwords)
- *dwords = mcp->mb[6];
+ *dwords = buffers;
}
return rval;
*/
map = (vp_index - 1) / 8;
pos = (vp_index - 1) & 7;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vce->vp_idx_map[map] |= 1 << pos;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
if (rval != QLA_SUCCESS) {
scsi_qla_host_t *ha = vha->parent;
/* Find an empty slot and assign an vp_id */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
if (vp_id > ha->max_npiv_vports) {
DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
vp_id, ha->max_npiv_vports));
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
ha->num_vhosts++;
vha->vp_idx = vp_id;
list_add_tail(&vha->vp_list, &ha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
uint16_t vp_id;
scsi_qla_host_t *ha = vha->parent;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = vha->vp_idx;
ha->num_vhosts--;
clear_bit(vp_id, ha->vp_idx_map);
list_del(&vha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
}
static scsi_qla_host_t *
}
/* Initialize the new vport unless it is a persistent port */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ret = qla24xx_modify_vp_config(vha);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
if (ret != QLA_SUCCESS) {
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
INIT_LIST_HEAD(&vha->list);
INIT_LIST_HEAD(&vha->fcports);
INIT_LIST_HEAD(&vha->vp_fcports);
+ INIT_LIST_HEAD(&vha->work_list);
vha->dpc_flags = 0L;
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
vha->flags.init_done = 1;
num_hosts++;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
set_bit(vha->vp_idx, ha->vp_idx_map);
ha->cur_vport_count++;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vha;
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
/* load the F/W, read paramaters, and init the H/W */
ha->instance = num_hosts;
- init_MUTEX(&ha->vport_sem);
+ mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
{
unsigned long flags;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
if (!locked)
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ spin_lock_irqsave(&pha->hardware_lock, flags);
list_add_tail(&e->list, &ha->work_list);
qla2xxx_wake_dpc(ha);
if (!locked)
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
return QLA_SUCCESS;
}
qla2x00_do_work(struct scsi_qla_host *ha)
{
struct qla_work_evt *e;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
while (!list_empty(&ha->work_list)) {
e = list_entry(ha->work_list.next, struct qla_work_evt, list);
list_del_init(&e->list);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
switch (e->type) {
case QLA_EVT_AEN:
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
}
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
}
/**************************************************************************
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
blob = &qla_fw_blobs[FW_ISP25XX];
}
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
}
out:
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
return blob;
}
{
int idx;
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
if (qla_fw_blobs[idx].fw)
release_firmware(qla_fw_blobs[idx].fw);
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
return -ENODEV;
}
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+ printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k2"
+#define QLA2XXX_VERSION "8.02.01-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
+
+ if (dev->type != &scsi_dev_type)
+ return 0;
+
+ sdev = to_scsi_device(dev);
add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
return 0;
if (sg_sysfs_valid) {
struct device *sg_class_member;
- sg_class_member = device_create(sg_sysfs_class, cl_dev->parent,
- MKDEV(SCSI_GENERIC_MAJOR,
- sdp->index),
- "%s", disk->disk_name);
+ sg_class_member = device_create_drvdata(sg_sysfs_class,
+ cl_dev->parent,
+ MKDEV(SCSI_GENERIC_MAJOR,
+ sdp->index),
+ sdp,
+ "%s", disk->disk_name);
if (IS_ERR(sg_class_member)) {
printk(KERN_ERR "sg_add: "
"device_create failed\n");
error = PTR_ERR(sg_class_member);
goto cdev_add_err;
}
- dev_set_drvdata(sg_class_member, sdp);
error = sysfs_create_link(&scsidp->sdev_gendev.kobj,
&sg_class_member->kobj, "generic");
if (error)
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
STp->disk->disk_name, st_formats[i]);
st_class_member =
- device_create(st_sysfs_class, &STp->device->sdev_gendev,
- MKDEV(SCSI_TAPE_MAJOR,
- TAPE_MINOR(dev_num, mode, rew)),
- "%s", name);
+ device_create_drvdata(st_sysfs_class,
+ &STp->device->sdev_gendev,
+ MKDEV(SCSI_TAPE_MAJOR,
+ TAPE_MINOR(dev_num,
+ mode, rew)),
+ &STp->modes[mode],
+ "%s", name);
if (IS_ERR(st_class_member)) {
printk(KERN_WARNING "st%d: device_create failed\n",
dev_num);
error = PTR_ERR(st_class_member);
goto out;
}
- dev_set_drvdata(st_class_member, &STp->modes[mode]);
error = device_create_file(st_class_member,
&dev_attr_defined);
#define CONFIG_HUB6 1
#include <asm/serial.h>
-
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
pbn_b2_2_115200 },
-
+ /*
+ * IntaShield IS-400
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
*/
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
- depends on BFIN && EXPERIMENTAL
+ depends on BLACKFIN && EXPERIMENTAL
select SERIAL_CORE
help
Enble support SPORT emulate UART on Blackfin series.
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct device *tty_dev;
+ struct uart_match match = {port, drv};
mutex_lock(&state->mutex);
return 0;
}
- if (!port->suspended) {
+ tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ if (!port->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(port->irq);
mutex_unlock(&state->mutex);
return 0;
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
int h, l;
c = *p++;
- h = highhex(c);
- l = lowhex(c);
+ h = hex_asc_hi(c);
+ l = hex_asc_lo(c);
put_char(port, h);
put_char(port, l);
checksum += h + l;
}
put_char(port, '#');
- put_char(port, highhex(checksum));
- put_char(port, lowhex(checksum));
+ put_char(port, hex_asc_hi(checksum));
+ put_char(port, hex_asc_lo(checksum));
} while (get_char(port) != '+');
} else
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
} else
spin_lock(&port->lock);
- spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < n; i++) {
if (*s == '\n')
sunhv_console_putchar(port, '\r');
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mutex.h>
| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
struct spidev_data {
- struct device dev;
+ dev_t devt;
+ spinlock_t spi_lock;
struct spi_device *spi;
struct list_head device_entry;
+ /* buffer is NULL unless this device is open (users > 0) */
struct mutex buf_lock;
unsigned users;
u8 *buffer;
/*-------------------------------------------------------------------------*/
+/*
+ * We can't use the standard synchronous wrappers for file I/O; we
+ * need to protect against async removal of the underlying spi_device.
+ */
+static void spidev_complete(void *arg)
+{
+ complete(arg);
+}
+
+static ssize_t
+spidev_sync(struct spidev_data *spidev, struct spi_message *message)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+ int status;
+
+ message->complete = spidev_complete;
+ message->context = &done;
+
+ spin_lock_irq(&spidev->spi_lock);
+ if (spidev->spi == NULL)
+ status = -ESHUTDOWN;
+ else
+ status = spi_async(spidev->spi, message);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (status == 0) {
+ wait_for_completion(&done);
+ status = message->status;
+ if (status == 0)
+ status = message->actual_length;
+ }
+ return status;
+}
+
+static inline ssize_t
+spidev_sync_write(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .tx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+static inline ssize_t
+spidev_sync_read(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .rx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+/*-------------------------------------------------------------------------*/
+
/* Read-only message with current device setup */
static ssize_t
spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
/* chipselect only toggles at start or end of operation */
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
- status = spi_read(spi, spidev->buffer, count);
+ status = spidev_sync_read(spidev, count);
if (status == 0) {
unsigned long missing;
size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
unsigned long missing;
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
- status = spi_write(spi, spidev->buffer, count);
+ status = spidev_sync_write(spidev, count);
if (status == 0)
status = count;
} else
struct spi_transfer *k_xfers;
struct spi_transfer *k_tmp;
struct spi_ioc_transfer *u_tmp;
- struct spi_device *spi = spidev->spi;
unsigned n, total;
u8 *buf;
int status = -EFAULT;
spi_message_add_tail(k_tmp, &msg);
}
- status = spi_sync(spi, &msg);
+ status = spidev_sync(spidev, &msg);
if (status < 0)
goto done;
if (err)
return -EFAULT;
+ /* guard against device removal before, or while,
+ * we issue this ioctl.
+ */
spidev = filp->private_data;
- spi = spidev->spi;
+ spin_lock_irq(&spidev->spi_lock);
+ spi = spi_dev_get(spidev->spi);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (spi == NULL)
+ return -ESHUTDOWN;
switch (cmd) {
/* read requests */
default:
/* segmented and/or full-duplex I/O request */
if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
- || _IOC_DIR(cmd) != _IOC_WRITE)
- return -ENOTTY;
+ || _IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -ENOTTY;
+ break;
+ }
tmp = _IOC_SIZE(cmd);
if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
kfree(ioc);
break;
}
+ spi_dev_put(spi);
return retval;
}
mutex_lock(&device_list_lock);
list_for_each_entry(spidev, &device_list, device_entry) {
- if (spidev->dev.devt == inode->i_rdev) {
+ if (spidev->devt == inode->i_rdev) {
status = 0;
break;
}
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
+
+ /* last close? */
spidev->users--;
if (!spidev->users) {
+ int dofree;
+
kfree(spidev->buffer);
spidev->buffer = NULL;
+
+ /* ... after we unbound from the underlying device? */
+ spin_lock_irq(&spidev->spi_lock);
+ dofree = (spidev->spi == NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (dofree)
+ kfree(spidev);
}
mutex_unlock(&device_list_lock);
* It also simplifies memory management.
*/
-static void spidev_classdev_release(struct device *dev)
-{
- struct spidev_data *spidev;
-
- spidev = container_of(dev, struct spidev_data, dev);
- kfree(spidev);
-}
-
-static struct class spidev_class = {
- .name = "spidev",
- .owner = THIS_MODULE,
- .dev_release = spidev_classdev_release,
-};
+static struct class *spidev_class;
/*-------------------------------------------------------------------------*/
/* Initialize the driver data */
spidev->spi = spi;
+ spin_lock_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
mutex_lock(&device_list_lock);
minor = find_first_zero_bit(minors, N_SPI_MINORS);
if (minor < N_SPI_MINORS) {
- spidev->dev.parent = &spi->dev;
- spidev->dev.class = &spidev_class;
- spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor);
- snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id,
+ struct device *dev;
+
+ spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
+ dev = device_create(spidev_class, &spi->dev, spidev->devt,
"spidev%d.%d",
spi->master->bus_num, spi->chip_select);
- status = device_register(&spidev->dev);
+ status = IS_ERR(dev) ? PTR_ERR(dev) : 0;
} else {
dev_dbg(&spi->dev, "no minor number available!\n");
status = -ENODEV;
}
if (status == 0) {
set_bit(minor, minors);
- dev_set_drvdata(&spi->dev, spidev);
+ spi_set_drvdata(spi, spidev);
list_add(&spidev->device_entry, &device_list);
}
mutex_unlock(&device_list_lock);
static int spidev_remove(struct spi_device *spi)
{
- struct spidev_data *spidev = dev_get_drvdata(&spi->dev);
+ struct spidev_data *spidev = spi_get_drvdata(spi);
- mutex_lock(&device_list_lock);
+ /* make sure ops on existing fds can abort cleanly */
+ spin_lock_irq(&spidev->spi_lock);
+ spidev->spi = NULL;
+ spi_set_drvdata(spi, NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+ /* prevent new opens */
+ mutex_lock(&device_list_lock);
list_del(&spidev->device_entry);
- dev_set_drvdata(&spi->dev, NULL);
- clear_bit(MINOR(spidev->dev.devt), minors);
- device_unregister(&spidev->dev);
-
+ device_destroy(spidev_class, spidev->devt);
+ clear_bit(MINOR(spidev->devt), minors);
+ if (spidev->users == 0)
+ kfree(spidev);
mutex_unlock(&device_list_lock);
return 0;
if (status < 0)
return status;
- status = class_register(&spidev_class);
- if (status < 0) {
+ spidev_class = class_create(THIS_MODULE, "spidev");
+ if (IS_ERR(spidev_class)) {
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
- return status;
+ return PTR_ERR(spidev_class);
}
status = spi_register_driver(&spidev_spi);
if (status < 0) {
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
return status;
static void __exit spidev_exit(void)
{
spi_unregister_driver(&spidev_spi);
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
module_exit(spidev_exit);
int err = 0;
u32 tmp;
- might_sleep();
-
if (!pdev)
goto out;
bus = pdev->bus;
+ might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+
/* Enable interrupts for this device. */
if (bus->host_pci &&
((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
if (ret)
goto err_get_minor;
- idev->dev = device_create(uio_class->class, parent,
- MKDEV(uio_major, idev->minor),
- "uio%d", idev->minor);
+ idev->dev = device_create_drvdata(uio_class->class, parent,
+ MKDEV(uio_major, idev->minor), idev,
+ "uio%d", idev->minor);
if (IS_ERR(idev->dev)) {
printk(KERN_ERR "UIO: device register failed\n");
ret = PTR_ERR(idev->dev);
goto err_device_create;
}
- dev_set_drvdata(idev->dev, idev);
ret = uio_dev_add_attributes(idev);
if (ret)
* Only data is little endian, addr has cpu endianess
*/
static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+ hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
* Only data is little endian, addr has cpu endianess
*/
static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
spin_lock_irqsave(&dev->hpi.lock, flags);
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+ *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
len--;
}
- hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
len--;
}
- hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
To compile this driver as a module, choose M here: the
module will be called usblp.
+config USB_WDM
+ tristate "USB Wireless Device Management support"
+ depends on USB
+ ---help---
+ This driver supports the WMC Device Management functionality
+ of cell phones compliant to the CDC WMC specification. You can use
+ AT commands over this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdc-wdm.
+
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
+obj-$(CONFIG_USB_WDM) += cdc-wdm.o
--- /dev/null
+/*
+ * cdc-wdm.c
+ *
+ * This driver supports USB CDC WCM Device Management.
+ *
+ * Copyright (c) 2007-2008 Oliver Neukum
+ *
+ * Some code taken from cdc-acm.c
+ *
+ * Released under the GPLv2.
+ *
+ * Many thanks to Carl Nordbeck
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.02"
+#define DRIVER_AUTHOR "Oliver Neukum"
+
+static struct usb_device_id wdm_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
+ },
+ { }
+};
+
+#define WDM_MINOR_BASE 176
+
+
+#define WDM_IN_USE 1
+#define WDM_DISCONNECTING 2
+#define WDM_RESULT 3
+#define WDM_READ 4
+#define WDM_INT_STALL 5
+#define WDM_POLL_RUNNING 6
+
+
+#define WDM_MAX 16
+
+
+static DEFINE_MUTEX(wdm_mutex);
+
+/* --- method tables --- */
+
+struct wdm_device {
+ u8 *inbuf; /* buffer for response */
+ u8 *outbuf; /* buffer for command */
+ u8 *sbuf; /* buffer for status */
+ u8 *ubuf; /* buffer for copy to user space */
+
+ struct urb *command;
+ struct urb *response;
+ struct urb *validity;
+ struct usb_interface *intf;
+ struct usb_ctrlrequest *orq;
+ struct usb_ctrlrequest *irq;
+ spinlock_t iuspin;
+
+ unsigned long flags;
+ u16 bufsize;
+ u16 wMaxCommand;
+ u16 wMaxPacketSize;
+ u16 bMaxPacketSize0;
+ __le16 inum;
+ int reslength;
+ int length;
+ int read;
+ int count;
+ dma_addr_t shandle;
+ dma_addr_t ihandle;
+ struct mutex wlock;
+ struct mutex rlock;
+ wait_queue_head_t wait;
+ struct work_struct rxwork;
+ int werr;
+ int rerr;
+};
+
+static struct usb_driver wdm_driver;
+
+/* --- callbacks --- */
+static void wdm_out_callback(struct urb *urb)
+{
+ struct wdm_device *desc;
+ desc = urb->context;
+ spin_lock(&desc->iuspin);
+ desc->werr = urb->status;
+ spin_unlock(&desc->iuspin);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ kfree(desc->outbuf);
+ wake_up(&desc->wait);
+}
+
+static void wdm_in_callback(struct urb *urb)
+{
+ struct wdm_device *desc = urb->context;
+ int status = urb->status;
+
+ spin_lock(&desc->iuspin);
+
+ if (status) {
+ switch (status) {
+ case -ENOENT:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ENOENT");
+ break;
+ case -ECONNRESET:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ECONNRESET");
+ break;
+ case -ESHUTDOWN:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ESHUTDOWN");
+ break;
+ case -EPIPE:
+ err("nonzero urb status received: -EPIPE");
+ break;
+ default:
+ err("Unexpected error %d", status);
+ break;
+ }
+ }
+
+ desc->rerr = status;
+ desc->reslength = urb->actual_length;
+ memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
+ desc->length += desc->reslength;
+ wake_up(&desc->wait);
+
+ set_bit(WDM_READ, &desc->flags);
+ spin_unlock(&desc->iuspin);
+}
+
+static void wdm_int_callback(struct urb *urb)
+{
+ int rv = 0;
+ int status = urb->status;
+ struct wdm_device *desc;
+ struct usb_ctrlrequest *req;
+ struct usb_cdc_notification *dr;
+
+ desc = urb->context;
+ req = desc->irq;
+ dr = (struct usb_cdc_notification *)desc->sbuf;
+
+ if (status) {
+ switch (status) {
+ case -ESHUTDOWN:
+ case -ENOENT:
+ case -ECONNRESET:
+ return; /* unplug */
+ case -EPIPE:
+ set_bit(WDM_INT_STALL, &desc->flags);
+ err("Stall on int endpoint");
+ goto sw; /* halt is cleared in work */
+ default:
+ err("nonzero urb status received: %d", status);
+ break;
+ }
+ }
+
+ if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
+ err("wdm_int_callback - %d bytes", urb->actual_length);
+ goto exit;
+ }
+
+ switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
+ dr->wIndex, dr->wLength);
+ break;
+
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_NETWORK_CONNECTION %s network",
+ dr->wValue ? "connected to" : "disconnected from");
+ goto exit;
+ default:
+ clear_bit(WDM_POLL_RUNNING, &desc->flags);
+ err("unknown notification %d received: index %d len %d",
+ dr->bNotificationType, dr->wIndex, dr->wLength);
+ goto exit;
+ }
+
+ req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(desc->bMaxPacketSize0);
+
+ usb_fill_control_urb(
+ desc->response,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ desc->inbuf,
+ desc->bMaxPacketSize0,
+ wdm_in_callback,
+ desc
+ );
+ desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ spin_lock(&desc->iuspin);
+ clear_bit(WDM_READ, &desc->flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
+ dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
+ __func__, rv);
+ }
+ spin_unlock(&desc->iuspin);
+ if (rv < 0) {
+ if (rv == -EPERM)
+ return;
+ if (rv == -ENOMEM) {
+sw:
+ rv = schedule_work(&desc->rxwork);
+ if (rv)
+ err("Cannot schedule work");
+ }
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv)
+ err("%s - usb_submit_urb failed with result %d",
+ __func__, rv);
+
+}
+
+static void kill_urbs(struct wdm_device *desc)
+{
+ usb_kill_urb(desc->command);
+ usb_kill_urb(desc->validity);
+ usb_kill_urb(desc->response);
+}
+
+static void free_urbs(struct wdm_device *desc)
+{
+ usb_free_urb(desc->validity);
+ usb_free_urb(desc->response);
+ usb_free_urb(desc->command);
+}
+
+static void cleanup(struct wdm_device *desc)
+{
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->inbuf,
+ desc->response->transfer_dma);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc->ubuf);
+ free_urbs(desc);
+ kfree(desc);
+}
+
+static ssize_t wdm_write
+(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ u8 *buf;
+ int rv = -EMSGSIZE, r, we;
+ struct wdm_device *desc = file->private_data;
+ struct usb_ctrlrequest *req;
+
+ if (count > desc->wMaxCommand)
+ count = desc->wMaxCommand;
+
+ spin_lock_irq(&desc->iuspin);
+ we = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ if (we < 0)
+ return -EIO;
+
+ r = mutex_lock_interruptible(&desc->wlock); /* concurrent writes */
+ rv = -ERESTARTSYS;
+ if (r)
+ goto outnl;
+
+ r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+ &desc->flags));
+ if (r < 0)
+ goto out;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+
+ desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ if (!buf) {
+ rv = -ENOMEM;
+ goto out;
+ }
+
+ r = copy_from_user(buf, buffer, count);
+ if (r > 0) {
+ kfree(buf);
+ rv = -EFAULT;
+ goto out;
+ }
+
+ req = desc->orq;
+ usb_fill_control_urb(
+ desc->command,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ buf,
+ count,
+ wdm_out_callback,
+ desc
+ );
+
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(count);
+ set_bit(WDM_IN_USE, &desc->flags);
+
+ rv = usb_submit_urb(desc->command, GFP_KERNEL);
+ if (rv < 0) {
+ kfree(buf);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ } else {
+ dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
+ req->wIndex);
+ }
+out:
+ mutex_unlock(&desc->wlock);
+outnl:
+ return rv < 0 ? rv : count;
+}
+
+static ssize_t wdm_read
+(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+ int rv, cntr;
+ int i = 0;
+ struct wdm_device *desc = file->private_data;
+
+
+ rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+ if (rv < 0)
+ return -ERESTARTSYS;
+
+ if (desc->length == 0) {
+ desc->read = 0;
+retry:
+ i++;
+ rv = wait_event_interruptible(desc->wait,
+ test_bit(WDM_READ, &desc->flags));
+
+ if (rv < 0) {
+ rv = -ERESTARTSYS;
+ goto err;
+ }
+
+ spin_lock_irq(&desc->iuspin);
+
+ if (desc->rerr) { /* read completed, error happened */
+ int t = desc->rerr;
+ desc->rerr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ err("reading had resulted in %d", t);
+ rv = -EIO;
+ goto err;
+ }
+ /*
+ * recheck whether we've lost the race
+ * against the completion handler
+ */
+ if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ if (!desc->reslength) { /* zero length read */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ clear_bit(WDM_READ, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ }
+
+ cntr = count > desc->length ? desc->length : count;
+ rv = copy_to_user(buffer, desc->ubuf, cntr);
+ if (rv > 0) {
+ rv = -EFAULT;
+ goto err;
+ }
+
+ for (i = 0; i < desc->length - cntr; i++)
+ desc->ubuf[i] = desc->ubuf[i + cntr];
+
+ desc->length -= cntr;
+ rv = cntr;
+
+err:
+ mutex_unlock(&desc->rlock);
+ if (rv < 0)
+ err("wdm_read: exit error");
+ return rv;
+}
+
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ struct wdm_device *desc = file->private_data;
+
+ wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags));
+ if (desc->werr < 0)
+ err("Error in flush path: %d", desc->werr);
+
+ return desc->werr;
+}
+
+static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct wdm_device *desc = file->private_data;
+ unsigned long flags;
+ unsigned int mask = 0;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ mask = POLLERR;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ goto desc_out;
+ }
+ if (test_bit(WDM_READ, &desc->flags))
+ mask = POLLIN | POLLRDNORM;
+ if (desc->rerr || desc->werr)
+ mask |= POLLERR;
+ if (!test_bit(WDM_IN_USE, &desc->flags))
+ mask |= POLLOUT | POLLWRNORM;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+
+ poll_wait(file, &desc->wait, wait);
+
+desc_out:
+ return mask;
+}
+
+static int wdm_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ int rv = -ENODEV;
+ struct usb_interface *intf;
+ struct wdm_device *desc;
+
+ mutex_lock(&wdm_mutex);
+ intf = usb_find_interface(&wdm_driver, minor);
+ if (!intf)
+ goto out;
+
+ desc = usb_get_intfdata(intf);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ goto out;
+
+ desc->count++;
+ file->private_data = desc;
+
+ rv = usb_submit_urb(desc->validity, GFP_KERNEL);
+
+ if (rv < 0) {
+ desc->count--;
+ err("Error submitting int urb - %d", rv);
+ goto out;
+ }
+ rv = 0;
+
+out:
+ mutex_unlock(&wdm_mutex);
+ return rv;
+}
+
+static int wdm_release(struct inode *inode, struct file *file)
+{
+ struct wdm_device *desc = file->private_data;
+
+ mutex_lock(&wdm_mutex);
+ desc->count--;
+ if (!desc->count) {
+ dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+ kill_urbs(desc);
+ }
+ mutex_unlock(&wdm_mutex);
+ return 0;
+}
+
+static const struct file_operations wdm_fops = {
+ .owner = THIS_MODULE,
+ .read = wdm_read,
+ .write = wdm_write,
+ .open = wdm_open,
+ .flush = wdm_flush,
+ .release = wdm_release,
+ .poll = wdm_poll
+};
+
+static struct usb_class_driver wdm_class = {
+ .name = "cdc-wdm%d",
+ .fops = &wdm_fops,
+ .minor_base = WDM_MINOR_BASE,
+};
+
+/* --- error handling --- */
+static void wdm_rxwork(struct work_struct *work)
+{
+ struct wdm_device *desc = container_of(work, struct wdm_device, rxwork);
+ unsigned long flags;
+ int rv;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ } else {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ if (rv < 0 && rv != -EPERM) {
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ schedule_work(&desc->rxwork);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ }
+ }
+}
+
+/* --- hotplug --- */
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int rv = -EINVAL;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct wdm_device *desc;
+ struct usb_host_interface *iface;
+ struct usb_endpoint_descriptor *ep;
+ struct usb_cdc_dmm_desc *dmhd;
+ u8 *buffer = intf->altsetting->extra;
+ int buflen = intf->altsetting->extralen;
+ u16 maxcom = 0;
+
+ if (!buffer)
+ goto out;
+
+ while (buflen > 0) {
+ if (buffer [1] != USB_DT_CS_INTERFACE) {
+ err("skipping garbage");
+ goto next_desc;
+ }
+
+ switch (buffer [2]) {
+ case USB_CDC_HEADER_TYPE:
+ break;
+ case USB_CDC_DMM_TYPE:
+ dmhd = (struct usb_cdc_dmm_desc *)buffer;
+ maxcom = le16_to_cpu(dmhd->wMaxCommand);
+ dev_dbg(&intf->dev,
+ "Finding maximum buffer length: %d", maxcom);
+ break;
+ default:
+ err("Ignoring extra header, type %d, length %d",
+ buffer[2], buffer[0]);
+ break;
+ }
+next_desc:
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ rv = -ENOMEM;
+ desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
+ if (!desc)
+ goto out;
+ mutex_init(&desc->wlock);
+ mutex_init(&desc->rlock);
+ spin_lock_init(&desc->iuspin);
+ init_waitqueue_head(&desc->wait);
+ desc->wMaxCommand = maxcom;
+ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
+ desc->intf = intf;
+ INIT_WORK(&desc->rxwork, wdm_rxwork);
+
+ iface = &intf->altsetting[0];
+ ep = &iface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(ep)) {
+ rv = -EINVAL;
+ goto err;
+ }
+
+ desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+ desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
+
+ desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->orq)
+ goto err;
+ desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->irq)
+ goto err;
+
+ desc->validity = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->validity)
+ goto err;
+
+ desc->response = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->response)
+ goto err;
+
+ desc->command = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->command)
+ goto err;
+
+ desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+ if (!desc->ubuf)
+ goto err;
+
+ desc->sbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->wMaxPacketSize,
+ GFP_KERNEL,
+ &desc->validity->transfer_dma);
+ if (!desc->sbuf)
+ goto err;
+
+ desc->inbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->bMaxPacketSize0,
+ GFP_KERNEL,
+ &desc->response->transfer_dma);
+ if (!desc->inbuf)
+ goto err2;
+
+ usb_fill_int_urb(
+ desc->validity,
+ interface_to_usbdev(intf),
+ usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress),
+ desc->sbuf,
+ desc->wMaxPacketSize,
+ wdm_int_callback,
+ desc,
+ ep->bInterval
+ );
+ desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, desc);
+ rv = usb_register_dev(intf, &wdm_class);
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
+ if (rv < 0)
+ goto err;
+out:
+ return rv;
+err2:
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+err:
+ free_urbs(desc);
+ kfree(desc->ubuf);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc);
+ return rv;
+}
+
+static void wdm_disconnect(struct usb_interface *intf)
+{
+ struct wdm_device *desc;
+ unsigned long flags;
+
+ usb_deregister_dev(intf, &wdm_class);
+ mutex_lock(&wdm_mutex);
+ desc = usb_get_intfdata(intf);
+
+ /* the spinlock makes sure no new urbs are generated in the callbacks */
+ spin_lock_irqsave(&desc->iuspin, flags);
+ set_bit(WDM_DISCONNECTING, &desc->flags);
+ set_bit(WDM_READ, &desc->flags);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ cancel_work_sync(&desc->rxwork);
+ kill_urbs(desc);
+ wake_up_all(&desc->wait);
+ if (!desc->count)
+ cleanup(desc);
+ mutex_unlock(&wdm_mutex);
+}
+
+static struct usb_driver wdm_driver = {
+ .name = "cdc_wdm",
+ .probe = wdm_probe,
+ .disconnect = wdm_disconnect,
+ .id_table = wdm_ids,
+};
+
+/* --- low level module stuff --- */
+
+static int __init wdm_init(void)
+{
+ int rv;
+
+ rv = usb_register(&wdm_driver);
+
+ return rv;
+}
+
+static void __exit wdm_exit(void)
+{
+ usb_deregister(&wdm_driver);
+}
+
+module_init(wdm_init);
+module_exit(wdm_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION("USB Abstract Control Model driver for "
+ "USB WCM Device Management");
+MODULE_LICENSE("GPL");
{
int err, c;
- /* put device-specific files into sysfs */
- usb_create_sysfs_dev_files(udev);
-
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
* unconfigure the device */
if (udev->actconfig)
usb_set_configuration(udev, -1);
-
- usb_remove_sysfs_dev_files(udev);
}
#ifdef CONFIG_PM
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
- "usb_host%d", busnum);
+ bus->dev = device_create_drvdata(usb_host_class, bus->controller,
+ MKDEV(0, 0), bus,
+ "usb_host%d", busnum);
result = PTR_ERR(bus->dev);
if (IS_ERR(bus->dev))
goto error_create_class_dev;
- dev_set_drvdata(bus->dev, bus);
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
+ /* has a port been handed over to a companion? */
+ int (*port_handed_over)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
usb_unlock_device(udev);
+ /* Remove the device-specific files from sysfs. This must be
+ * done with udev unlocked, because some of the attribute
+ * routines try to acquire the device lock.
+ */
+ usb_remove_sysfs_dev_files(udev);
+
/* Unregister the device. The device driver is responsible
* for removing the device files from usbfs and sysfs and for
* de-configuring the device.
goto fail;
}
+ /* put device-specific files into sysfs */
+ usb_create_sysfs_dev_files(udev);
+
/* Tell the world! */
announce_device(udev);
return err;
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
}
- dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1);
+ if (hub->hdev->parent ||
+ !hcd->driver->port_handed_over ||
+ !(hcd->driver->port_handed_over)(hcd, port1))
+ dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
+ port1);
done:
hub_port_disable(hub, port1, 1);
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Avision AV600U */
+ { USB_DEVICE(0x0638, 0x0a13), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
container_of(kobj, struct device, kobj));
size_t nleft = count;
size_t srclen, n;
+ int cfgno;
+ void *src;
- usb_lock_device(udev);
-
- /* The binary attribute begins with the device descriptor */
- srclen = sizeof(struct usb_device_descriptor);
- if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + (char *) &udev->descriptor, n);
- nleft -= n;
- buf += n;
- off = 0;
- } else {
- off -= srclen;
- }
-
- /* Then follows the raw descriptor entry for the current
- * configuration (config plus subsidiary descriptors).
+ /* The binary attribute begins with the device descriptor.
+ * Following that are the raw descriptor entries for all the
+ * configurations (config plus subsidiary descriptors).
*/
- if (udev->actconfig) {
- int cfgno = udev->actconfig - udev->config;
-
- srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength);
+ for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+ nleft > 0; ++cfgno) {
+ if (cfgno < 0) {
+ src = &udev->descriptor;
+ srclen = sizeof(struct usb_device_descriptor);
+ } else {
+ src = udev->rawdescriptors[cfgno];
+ srclen = __le16_to_cpu(udev->config[cfgno].desc.
+ wTotalLength);
+ }
if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + udev->rawdescriptors[cfgno], n);
+ n = min(nleft, srclen - (size_t) off);
+ memcpy(buf, src + off, n);
nleft -= n;
+ buf += n;
+ off = 0;
+ } else {
+ off -= srclen;
}
}
- usb_unlock_device(udev);
return count - nleft;
}
udc_reset_ep_queue(udc, pipe);
/* report disconnect; the driver is already quiesced */
+ spin_unlock(&udc->lock);
udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
return 0;
}
ep0_idle(udc);
udc->gadget.speed = USB_SPEED_UNKNOWN;
- udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+ if (udc->mach->udc_command)
+ udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
/**
module will be called r8a66597-hcd.
config SUPERH_ON_CHIP_R8A66597
- boolean "Enable SuperH on-chip USB like the R8A66597"
- depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+ boolean "Enable SuperH on-chip R8A66597 USB"
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
help
- Renesas SuperH processor has USB like the R8A66597.
- This driver supported processor is SH7366.
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
if (retval)
return retval;
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
}
break;
case USB_PORT_FEAT_C_SUSPEND:
- /* we auto-clear this feature */
+ clear_bit(wIndex, &ehci->port_c_suspend);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
/* resume completed? */
else if (time_after_eq(jiffies,
ehci->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ set_bit(wIndex, &ehci->port_c_suspend);
ehci->reset_done[wIndex] = 0;
/* stop resume signaling */
status |= 1 << USB_PORT_FEAT_RESET;
if (temp & PORT_POWER)
status |= 1 << USB_PORT_FEAT_POWER;
+ if (test_bit(wIndex, &ehci->port_c_suspend))
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
#ifndef VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
set_owner(ehci, --portnum, PORT_OWNER);
}
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *reg;
+
+ if (ehci_is_TDI(ehci))
+ return 0;
+ reg = &ehci->regs->port_status[portnum - 1];
+ return ehci_readl(ehci, reg) & PORT_OWNER;
+}
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci_reset(ehci);
retval = ehci_init(hcd);
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
if (retval)
return retval;
+ hcd->has_tt = 1;
+
ehci_reset(ehci);
ehci_port_power(ehci, 0);
*/
.reset = ehci_orion_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static void __init
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
/*
switch (pdev->vendor) {
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
hcd->has_tt = 1;
tdi_reset(ehci);
}
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
/* when's the last uframe this urb could start? */
max = now + mod;
- /* typical case: reuse current schedule. stream is still active,
- * and no gaps from host falling behind (irq delays etc)
+ /* Typical case: reuse current schedule, stream is still active.
+ * Hopefully there are no gaps from the host falling behind
+ * (irq delays etc), but if there are we'll take the next
+ * slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
start = stream->next_uframe;
if (start < now)
start += mod;
- if (likely ((start + sched->span) < max))
- goto ready;
- /* else fell behind; someday, try to reschedule */
- status = -EL2NSYNC;
- goto fail;
+
+ /* Fell behind (by up to twice the slop amount)? */
+ if (start >= max - 2 * 8 * SCHEDULE_SLOP)
+ start += stream->interval * DIV_ROUND_UP(
+ max - start, stream->interval) - mod;
+
+ /* Tried to schedule too far into the future? */
+ if (unlikely((start + sched->span) >= max)) {
+ status = -EFBIG;
+ goto fail;
+ }
+ goto ready;
}
/* need to schedule; when's the next (u)frame we could start?
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
desc->actual_length = EHCI_ITD_LENGTH (t);
+ } else {
+ /* URB was too late */
+ desc->status = -EXDEV;
}
}
static void
scan_periodic (struct ehci_hcd *ehci)
{
- unsigned frame, clock, now_uframe, mod;
+ unsigned now_uframe, frame, clock, clock_frame, mod;
unsigned modified;
mod = ehci->periodic_size << 3;
else
clock = now_uframe + mod - 1;
clock %= mod;
+ clock_frame = clock >> 3;
for (;;) {
union ehci_shadow q, *q_p;
case Q_TYPE_ITD:
/* If this ITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- rmb ();
- for (uf = 0; uf < 8 && live; uf++) {
- if (0 == (q.itd->hw_transaction [uf]
- & ITD_ACTIVE(ehci)))
- continue;
- incomplete = true;
- q_p = &q.itd->itd_next;
- hw_p = &q.itd->hw_next;
- type = Q_NEXT_TYPE(ehci,
+ if (frame == clock_frame && live) {
+ rmb();
+ for (uf = 0; uf < 8; uf++) {
+ if (q.itd->hw_transaction[uf] &
+ ITD_ACTIVE(ehci))
+ break;
+ }
+ if (uf < 8) {
+ incomplete = true;
+ q_p = &q.itd->itd_next;
+ hw_p = &q.itd->hw_next;
+ type = Q_NEXT_TYPE(ehci,
q.itd->hw_next);
- q = *q_p;
- break;
+ q = *q_p;
+ break;
+ }
}
- if (uf < 8 && live)
- break;
/* Take finished ITDs out of the schedule
* and process them: recycle, maybe report
case Q_TYPE_SITD:
/* If this SITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- if ((q.sitd->hw_results & SITD_ACTIVE(ehci))
- && live) {
+ if (frame == clock_frame && live &&
+ (q.sitd->hw_results &
+ SITD_ACTIVE(ehci))) {
incomplete = true;
q_p = &q.sitd->sitd_next;
hw_p = &q.sitd->hw_next;
/* rescan the rest of this frame, then ... */
clock = now;
+ clock_frame = clock >> 3;
} else {
now_uframe++;
now_uframe %= mod;
dedicated to the companion controller */
unsigned long owned_ports; /* which ports are
owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
u32 command;
/* SILICON QUIRKS */
- unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
* needed (mostly in root hub code).
*/
-#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
+#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
/* Returns the speed of a device attached to a port on the root hub. */
static inline unsigned int
static u32 iolength;
static u32 pci_mem_phy0;
static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
static int __devinit isp1761_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
See <http://www.linux-usb.org/usbtest/> for more information,
including sample test device firmware and "how to use it".
+config USB_ISIGHTFW
+ tristate "iSight firmware loading support"
+ depends on USB
+ help
+ This driver loads firmware for USB Apple iSight cameras, allowing
+ them to be driven by the USB video class driver available at
+ http://linux-uvc.berlios.de
+
+ The firmware for this driver must be extracted from the MacOS
+ driver beforehand. Tools for doing so are available at
+ http://bersace03.free.fr
obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
--- /dev/null
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(0x05ac, 0x8300)},
+ {},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int llen, len, req, ret = 0;
+ const struct firmware *firmware;
+ unsigned char *buf;
+ unsigned char data[4];
+ char *ptr;
+
+ if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+ printk(KERN_ERR "Unable to load isight firmware\n");
+ return -ENODEV;
+ }
+
+ ptr = firmware->data;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+ 300) != 1) {
+ printk(KERN_ERR
+ "Failed to initialise isight firmware loader\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ while (1) {
+ memcpy(data, ptr, 4);
+ len = (data[0] << 8 | data[1]);
+ req = (data[2] << 8 | data[3]);
+ ptr += 4;
+
+ if (len == 0x8001)
+ break; /* success */
+ else if (len == 0)
+ continue;
+
+ for (; len > 0; req += 50) {
+ llen = len > 50 ? 50 : len;
+ len -= llen;
+
+ buf = kmalloc(llen, GFP_KERNEL);
+ memcpy(buf, ptr, llen);
+
+ ptr += llen;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+ buf, llen, 300) != llen) {
+ printk(KERN_ERR
+ "Failed to load isight firmware\n");
+ kfree(buf);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ kfree(buf);
+ }
+ }
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+ 300) != 1) {
+ printk(KERN_ERR "isight firmware loading completion failed\n");
+ ret = -ENODEV;
+ }
+out:
+ release_firmware(firmware);
+ return ret;
+}
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+ .name = "isight_firmware",
+ .probe = isight_firmware_load,
+ .disconnect = isight_firmware_disconnect,
+ .id_table = id_table,
+};
+
+static int __init isight_firmware_init(void)
+{
+ return usb_register(&isight_firmware_driver);
+}
+
+static void __exit isight_firmware_exit(void)
+{
+ usb_deregister(&isight_firmware_driver);
+}
+
+module_init(isight_firmware_init);
+module_exit(isight_firmware_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
} while(value);
kit->dev_no = bit;
- kit->dev = device_create(phidget_class, &kit->udev->dev, 0,
- "interfacekit%d", kit->dev_no);
+ kit->dev = device_create_drvdata(phidget_class, &kit->udev->dev,
+ MKDEV(0, 0), kit,
+ "interfacekit%d", kit->dev_no);
if (IS_ERR(kit->dev)) {
rc = PTR_ERR(kit->dev);
kit->dev = NULL;
goto out;
}
- dev_set_drvdata(kit->dev, kit);
if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
rc = -EIO;
} while(value);
mc->dev_no = bit;
- mc->dev = device_create(phidget_class, &mc->udev->dev, 0,
- "motorcontrol%d", mc->dev_no);
+ mc->dev = device_create_drvdata(phidget_class, &mc->udev->dev,
+ MKDEV(0, 0), mc,
+ "motorcontrol%d", mc->dev_no);
if (IS_ERR(mc->dev)) {
rc = PTR_ERR(mc->dev);
mc->dev = NULL;
goto out;
}
- dev_set_drvdata(mc->dev, mc);
-
if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
rc = -EIO;
goto out;
} while (value);
dev->dev_no = bit;
- dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
- "servo%d", dev->dev_no);
+ dev->dev = device_create_drvdata(phidget_class, &dev->udev->dev,
+ MKDEV(0, 0), dev,
+ "servo%d", dev->dev_no);
if (IS_ERR(dev->dev)) {
rc = PTR_ERR(dev->dev);
dev->dev = NULL;
goto out;
}
- dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x1a86, 0x7523) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
- { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/*
- * The following are the values for the Matrix Orbital VK204-25-USB
- * display, which use the FT232RL.
- */
-#define MTXORB_VK_VID 0x1b3d
-#define MTXORB_VK_PID 0x0158
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
+ */
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
#define FIC_VID 0x1457
#define FIC_NEO1973_DEBUG_PID 0x5118
+/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
#define AXESSTEL_PRODUCT_MV110H 0x1000
#define ONDA_VENDOR_ID 0x19d2
+#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
#define BANDRICH_VENDOR_ID 0x1A8D
#define MAXON_VENDOR_ID 0x16d8
+#define TELIT_VENDOR_ID 0x1bc7
+#define TELIT_PRODUCT_UC864E 0x1003
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
- { USB_DEVICE(0x19d2, 0x0001) }, /* Telstra NextG CDMA */
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
- { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
+#define PL2303_PRODUCT_ID_MMX 0x0612
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID 0xb000
-#define RATOC_PRODUCT_ID_USB60F 0xb020
#define TRIPP_VENDOR_ID 0x2478
#define TRIPP_PRODUCT_ID 0x2008
UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
"Cypress",
"Cypress AT2LP",
- US_SC_CYP_ATACB, US_PR_BULK, NULL,
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
0),
#endif
"Sony Ericsson",
"M600i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
/*
* Patch by Pete Zaitcev <zaitcev@redhat.com>
* Report by Mark Patton. Red Hat bz#208928.
+ * Added support for rev 0x0002 (Motorola ROKR W5)
+ * by Javier Smaldone <javier@smaldone.com.ar>
*/
-UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
"Motorola",
- "RAZR V3i",
+ "RAZR V3i/ROKR W5",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
select FB_CFB_IMAGEBLIT
select FB_MACMODES
-# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
bool
- depends on (FB = y) && HP300
- select FB_CFB_FILLRECT
+ depends on (FB = y) && DIO
select FB_CFB_IMAGEBLIT
default y
amifb_setup(option);
#endif
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_VIDEO))
- return -ENXIO;
+ return -ENODEV;
/*
* We request all registers starting from bplpt[0]
strcat(fb_info.fix.id, "Unknown");
goto default_chipset;
#else /* CONFIG_FB_AMIGA_OCS */
- err = -ENXIO;
+ err = -ENODEV;
goto amifb_error;
#endif /* CONFIG_FB_AMIGA_OCS */
break;
info->fix.mmio_start = raddr;
par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
- if (par->ati_regbase == 0)
+ if (par->ati_regbase == NULL)
return -ENOMEM;
info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00;
do {
rinfo->fb_base = ioremap (rinfo->fb_base_phys,
rinfo->mapped_vram);
- } while ( rinfo->fb_base == 0 &&
- ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
+ } while (rinfo->fb_base == NULL &&
+ ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM));
if (rinfo->fb_base == NULL) {
printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
* in fb_set_var()
*/
info->var.activate = var.activate;
- var.yoffset = info->var.yoffset;
- var.xoffset = info->var.xoffset;
- var.vmode = info->var.vmode;
+ var.vmode |= info->var.vmode & ~FB_VMODE_MASK;
fb_set_var(info, &var);
ops->var = info->var;
#include <linux/ctype.h>
#include <linux/idr.h>
#include <linux/err.h>
+#include <linux/kdev_t.h>
static ssize_t display_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
mutex_unlock(&allocated_dsp_lock);
if (!ret) {
- new_dev->dev = device_create(display_class, parent, 0,
- "display%d", new_dev->idx);
+ new_dev->dev = device_create_drvdata(display_class,
+ parent,
+ MKDEV(0,0),
+ new_dev,
+ "display%d",
+ new_dev->idx);
if (!IS_ERR(new_dev->dev)) {
- dev_set_drvdata(new_dev->dev, new_dev);
new_dev->parent = parent;
new_dev->driver = driver;
mutex_init(&new_dev->lock);
{
int ret;
+ if (!MACH_IS_APOLLO)
+ return -ENODEV;
+
if (fb_get_options("dnfb", NULL))
return -ENODEV;
#define INTFBPADDR 0x560000
if (!MACH_IS_HP300)
- return -ENXIO;
+ return -ENODEV;
if (fb_get_options("hpfb", NULL))
return -ENODEV;
virt->vaddr = ioremap_nocache(phys, size);
else
virt->vaddr = ioremap(phys, size);
- return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */
+ return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */
}
static inline void mga_iounmap(vaddr_t va) {
#endif
const char *fb_mode_option;
+EXPORT_SYMBOL_GPL(fb_mode_option);
/*
* Standard video mode definitions (taken from XFree86)
"", (margins) ? " with margins" : "", (interlace) ?
" interlaced" : "");
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
cvt_mode.xres = xres;
cvt_mode.yres = yres;
cvt_mode.refresh = (refresh) ? refresh : 60;
}
#ifdef CONFIG_CPU_FREQ
- pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n",
- pxafb_display_dma_period(var),
- get_clk_frequency_khz(0));
+ pr_debug("pxafb: dma period = %d ps\n",
+ pxafb_display_dma_period(var));
#endif
return 0;
struct pxafb_info *fbi;
void *addr;
struct pxafb_mach_info *inf = dev->platform_data;
- struct pxafb_mode_info *mode = inf->modes;
/* Alloc the pxafb_info and pseudo_palette in one step */
fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
-/*
- * linux/drivers/video/s3c2410fb.c
- * Copyright (c) Arnaud Patard, Ben Dooks
+/* linux/drivers/video/s3c2410fb.c
+ * Copyright (c) 2004,2005 Arnaud Patard
+ * Copyright (c) 2004-2008 Ben Dooks
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.c and others
- *
- * ChangeLog
- * 2005-04-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - u32 state -> pm_message_t state
- * - S3C2410_{VA,SZ}_LCD -> S3C24XX
- *
- * 2005-03-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the ioctl
- * - use readl/writel instead of __raw_writel/__raw_readl
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Added the possibility to set on or off the
- * debugging messages
- * - Replaced 0 and 1 by on or off when reading the
- * /sys files
- *
- * 2005-03-23: Ben Dooks <ben-linux@fluff.org>
- * - added non 16bpp modes
- * - updated platform information for range of x/y/bpp
- * - add code to ensure palette is written correctly
- * - add pixel clock divisor control
- *
- * 2004-11-11: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the use of currcon as it no more exists
- * - Added LCD power sysfs interface
- *
- * 2004-11-03: Ben Dooks <ben-linux@fluff.org>
- * - minor cleanups
- * - add suspend/resume support
- * - s3c2410fb_setcolreg() not valid in >8bpp modes
- * - removed last CONFIG_FB_S3C2410_FIXED
- * - ensure lcd controller stopped before cleanup
- * - added sysfs interface for backlight power
- * - added mask for gpio configuration
- * - ensured IRQs disabled during GPIO configuration
- * - disable TPAL before enabling video
- *
- * 2004-09-20: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Suppress command line options
- *
- * 2004-09-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.c to s3c2410fb.c
- * - Add support for different devices
- * - Backlight support
- *
- * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
- * - added clock (de-)allocation code
- * - added fixem fbmem option
- *
- * 2004-07-27: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- * - added a forgotten return in h1940fb_init
- *
- * 2004-07-19: Herbert Pötzl <herbert@13thfloor.at>
- * - code cleanup and extended debugging
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+ * Driver based on skeletonfb.c, sa1100fb.c and others.
+*/
#include <linux/module.h>
#include <linux/kernel.h>
return 0;
}
+/* s3c2410fb_lcd_enable
+ *
+ * shutdown the lcd controller
+ */
+static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (enable)
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
+ else
+ fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+
+ writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
+
+ local_irq_restore(flags);
+}
+
+
/*
* s3c2410fb_blank
* @blank_mode: the blank mode we want.
* blanking succeeded, != 0 if un-/blanking failed due to e.g. a
* video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
- * blank_mode == 2: suspend vsync
- * blank_mode == 3: suspend hsync
- * blank_mode == 4: powerdown
*
* Returns negative errno on error, or zero on success.
*
tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
+ if (blank_mode == FB_BLANK_POWERDOWN) {
+ s3c2410fb_lcd_enable(fbi, 0);
+ } else {
+ s3c2410fb_lcd_enable(fbi, 1);
+ }
+
if (blank_mode == FB_BLANK_UNBLANK)
writel(0x0, tpal_reg);
else {
}
/* create device files */
- device_create_file(&pdev->dev, &dev_attr_debug);
+ ret = device_create_file(&pdev->dev, &dev_attr_debug);
+ if (ret) {
+ printk(KERN_ERR "failed to add debug attribute\n");
+ }
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fbinfo->node, fbinfo->fix.id);
return s3c24xxfb_probe(pdev, DRV_S3C2412);
}
-/* s3c2410fb_stop_lcd
- *
- * shutdown the lcd controller
- */
-static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
- writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
-
- local_irq_restore(flags);
-}
/*
* Cleanup
unregister_framebuffer(fbinfo);
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
msleep(1);
s3c2410fb_unmap_video_memory(fbinfo);
struct fb_info *fbinfo = platform_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
/* sleep before disabling the clock, we need to ensure
* the LCD DMA engine is not going to get back on the bus
"Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-lcd");
+MODULE_ALIAS("platform:s3c2412-lcd");
/*
* linux/drivers/video/s3c2410fb.h
- * Copyright (c) Arnaud Patard
+ * Copyright (c) 2004 Arnaud Patard
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.h
- *
- * ChangeLog
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Moved dprintk to s3c2410fb.c
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.h to s3c2410fb.h
- * - Changed h1940 to s3c2410
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+*/
#ifndef __S3C2410FB_H
#define __S3C2410FB_H
} else {
struct sis_video_info *countvideo = card_list;
ivideo->cardnumber = 1;
- while((countvideo = countvideo->next) != 0)
+ while((countvideo = countvideo->next) != NULL)
ivideo->cardnumber++;
}
sm501fb_sync_regs(fbi);
mdelay(10);
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control |= SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
}
} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
/* disable panel power */
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control &= ~SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control &= ~SM501_DC_PANEL_CONTROL_BIAS;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
+/* Unique numbering for virtio devices. */
+static unsigned int dev_index;
+
static ssize_t device_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
int err;
dev->dev.bus = &virtio_bus;
- sprintf(dev->dev.bus_id, "%u", dev->index);
+
+ /* Assign a unique device index and hence name. */
+ dev->index = dev_index++;
+ sprintf(dev->dev.bus_id, "virtio%u", dev->index);
/* We always start by resetting the device, in case a previous
* driver messed it up. This also tests that code path a little. */
.bus_id = "virtio-pci",
};
-/* Unique numbering for devices under the kvm root */
-static unsigned int dev_index;
-
/* Convert a generic virtio device to our structure */
static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
{
if (vp_dev == NULL)
return -ENOMEM;
- snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
- vp_dev->vdev.index = dev_index;
- dev_index++;
-
vp_dev->vdev.dev.parent = &virtio_pci_root;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
struct vring_virtqueue *vq = to_vvq(_vq);
START_USE(vq);
- BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT));
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
if (unlikely(vq->broken))
return IRQ_HANDLED;
- /* Other side may have missed us turning off the interrupt,
- * but we should preserve disable semantic for virtio users. */
- if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
- pr_debug("virtqueue interrupt after disable for %p\n", vq);
- return IRQ_HANDLED;
- }
-
pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
if (vq->vq.callback)
vq->vq.callback(&vq->vq);
Most people will say N.
+config GEODE_WDT
+ tristate "AMD Geode CS5535/CS5536 Watchdog"
+ depends on MGEODE_LX
+ help
+ This driver enables a watchdog capability built into the
+ CS5535/CS5536 companion chips for the AMD Geode GX and LX
+ processors. This watchdog watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after
+ a certain amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called geodewdt.
+
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
depends on X86
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
#define stampit() stamp("here i am")
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
#define WATCHDOG_NAME "bfin-wdt"
#define PFX WATCHDOG_NAME ": "
# define bfin_wdt_resume NULL
#endif
-static struct platform_device bfin_wdt_device = {
- .name = WATCHDOG_NAME,
- .id = -1,
-};
-
-static struct platform_driver bfin_wdt_driver = {
- .driver = {
- .name = WATCHDOG_NAME,
- .owner = THIS_MODULE,
- },
- .suspend = bfin_wdt_suspend,
- .resume = bfin_wdt_resume,
-};
-
static const struct file_operations bfin_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
};
/**
- * bfin_wdt_init - Initialize module
+ * bfin_wdt_probe - Initialize module
*
- * Registers the device and notifier handler. Actual device
+ * Registers the misc device and notifier handler. Actual device
* initialization is handled by bfin_wdt_open().
*/
+static int __devinit bfin_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = register_reboot_notifier(&bfin_wdt_notifier);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ ret = misc_register(&bfin_wdt_miscdev);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return ret;
+ }
+
+ pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+ return 0;
+}
+
+/**
+ * bfin_wdt_remove - Initialize module
+ *
+ * Unregisters the misc device and notifier handler. Actual device
+ * deinitialization is handled by bfin_wdt_close().
+ */
+static int __devexit bfin_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&bfin_wdt_miscdev);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return 0;
+}
+
+static struct platform_device *bfin_wdt_device;
+
+static struct platform_driver bfin_wdt_driver = {
+ .probe = bfin_wdt_probe,
+ .remove = __devexit_p(bfin_wdt_remove),
+ .suspend = bfin_wdt_suspend,
+ .resume = bfin_wdt_resume,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * bfin_wdt_init - Initialize module
+ *
+ * Checks the module params and registers the platform device & driver.
+ * Real work is in the platform probe function.
+ */
static int __init bfin_wdt_init(void)
{
int ret;
/* Since this is an on-chip device and needs no board-specific
* resources, we'll handle all the platform device stuff here.
*/
- ret = platform_device_register(&bfin_wdt_device);
- if (ret)
- return ret;
-
- ret = platform_driver_probe(&bfin_wdt_driver, NULL);
- if (ret)
- return ret;
-
- ret = register_reboot_notifier(&bfin_wdt_notifier);
+ ret = platform_driver_register(&bfin_wdt_driver);
if (ret) {
- pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ pr_init(KERN_ERR PFX "unable to register driver\n");
return ret;
}
- ret = misc_register(&bfin_wdt_miscdev);
- if (ret) {
- pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- unregister_reboot_notifier(&bfin_wdt_notifier);
- return ret;
+ bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+ if (IS_ERR(bfin_wdt_device)) {
+ pr_init(KERN_ERR PFX "unable to register device\n");
+ platform_driver_unregister(&bfin_wdt_driver);
+ return PTR_ERR(bfin_wdt_device);
}
- pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
-
return 0;
}
/**
* bfin_wdt_exit - Deinitialize module
*
- * Unregisters the device and notifier handler. Actual device
- * deinitialization is handled by bfin_wdt_close().
+ * Back out the platform device & driver steps. Real work is in the
+ * platform remove function.
*/
static void __exit bfin_wdt_exit(void)
{
- misc_deregister(&bfin_wdt_miscdev);
- unregister_reboot_notifier(&bfin_wdt_notifier);
+ platform_device_unregister(bfin_wdt_device);
+ platform_driver_unregister(&bfin_wdt_driver);
}
module_init(bfin_wdt_init);
/*
- * drivers/char/watchdog/booke_wdt.c
- *
* Watchdog timer for PowerPC Book-E systems
*
* Author: Matthew McClintock
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/smp.h>
#include <linux/miscdevice.h>
#include <linux/notifier.h>
#include <linux/watchdog.h>
#define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */
#endif /* for timing information */
-u32 booke_wdt_enabled = 0;
+u32 booke_wdt_enabled;
u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
#ifdef CONFIG_FSL_BOOKE
#define WDTP(x) (TCR_WP(x))
#endif
-/*
- * booke_wdt_ping:
- */
-static __inline__ void booke_wdt_ping(void)
+static DEFINE_SPINLOCK(booke_wdt_lock);
+
+static void __booke_wdt_ping(void *data)
{
mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
}
-/*
- * booke_wdt_enable:
- */
-static __inline__ void booke_wdt_enable(void)
+static void booke_wdt_ping(void)
+{
+ on_each_cpu(__booke_wdt_ping, NULL, 0, 0);
+}
+
+static void __booke_wdt_enable(void *data)
{
u32 val;
/* clear status before enabling watchdog */
- booke_wdt_ping();
+ __booke_wdt_ping(NULL);
val = mfspr(SPRN_TCR);
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
mtspr(SPRN_TCR, val);
}
-/*
- * booke_wdt_write:
- */
-static ssize_t booke_wdt_write (struct file *file, const char __user *buf,
+static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
booke_wdt_ping();
}
static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .firmware_version = 0,
- .identity = "PowerPC Book-E Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "PowerPC Book-E Watchdog",
};
-/*
- * booke_wdt_ioctl:
- */
-static int booke_wdt_ioctl (struct inode *inode, struct file *file,
+static int booke_wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
u32 tmp = 0;
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user ((struct watchdog_info __user *) arg, &ident,
+ if (copy_to_user((struct watchdog_info __user *)arg, &ident,
sizeof(struct watchdog_info)))
return -EFAULT;
case WDIOC_GETSTATUS:
return 0;
}
-/*
- * booke_wdt_open:
- */
-static int booke_wdt_open (struct inode *inode, struct file *file)
+
+static int booke_wdt_open(struct inode *inode, struct file *file)
{
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 0) {
booke_wdt_enabled = 1;
- booke_wdt_enable();
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
}
+ spin_unlock(&booke_wdt_lock);
return nonseekable_open(inode, file);
}
static const struct file_operations booke_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = booke_wdt_write,
- .ioctl = booke_wdt_ioctl,
- .open = booke_wdt_open,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = booke_wdt_write,
+ .ioctl = booke_wdt_ioctl,
+ .open = booke_wdt_open,
};
static struct miscdevice booke_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &booke_wdt_fops,
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &booke_wdt_fops,
};
static void __exit booke_wdt_exit(void)
misc_deregister(&booke_wdt_miscdev);
}
-/*
- * booke_wdt_init:
- */
static int __init booke_wdt_init(void)
{
int ret = 0;
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
ident.firmware_version = cur_cpu_spec->pvr_value;
ret = misc_register(&booke_wdt_miscdev);
if (ret) {
- printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n",
WATCHDOG_MINOR, ret);
return ret;
}
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 1) {
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
- booke_wdt_enable();
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
}
+ spin_unlock(&booke_wdt_lock);
return ret;
}
--- /dev/null
+/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/uaccess.h>
+#include <asm/geode.h>
+
+#define GEODEWDT_HZ 500
+#define GEODEWDT_SCALE 6
+#define GEODEWDT_MAX_SECONDS 131
+
+#define WDT_FLAGS_OPEN 1
+#define WDT_FLAGS_ORPHAN 2
+
+#define DRV_NAME "geodewdt"
+#define WATCHDOG_NAME "Geode GX/LX WDT"
+#define WATCHDOG_TIMEOUT 60
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct platform_device *geodewdt_platform_device;
+static unsigned long wdt_flags;
+static int wdt_timer;
+static int safe_close;
+
+static void geodewdt_ping(void)
+{
+ /* Stop the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+
+ /* Reset the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+
+ /* Enable the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+}
+
+static void geodewdt_disable(void)
+{
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+}
+
+static int geodewdt_set_heartbeat(int val)
+{
+ if (val < 1 || val > GEODEWDT_MAX_SECONDS)
+ return -EINVAL;
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+
+ timeout = val;
+ return 0;
+}
+
+static int
+geodewdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+ return -EBUSY;
+
+ if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+ __module_get(THIS_MODULE);
+
+ geodewdt_ping();
+ return nonseekable_open(inode, file);
+}
+
+static int
+geodewdt_release(struct inode *inode, struct file *file)
+{
+ if (safe_close) {
+ geodewdt_disable();
+ module_put(THIS_MODULE);
+ }
+ else {
+ printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
+ geodewdt_ping();
+
+ set_bit(WDT_FLAGS_ORPHAN, &wdt_flags);
+ }
+
+ clear_bit(WDT_FLAGS_OPEN, &wdt_flags);
+ safe_close = 0;
+ return 0;
+}
+
+static ssize_t
+geodewdt_write(struct file *file, const char __user *data, size_t len,
+ loff_t *ppos)
+{
+ if(len) {
+ if (!nowayout) {
+ size_t i;
+ safe_close = 0;
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+
+ if (c == 'V')
+ safe_close = 1;
+ }
+ }
+
+ geodewdt_ping();
+ }
+ return len;
+}
+
+static int
+geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int interval;
+
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+ .identity = WATCHDOG_NAME,
+ };
+
+ switch(cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ geodewdt_ping();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(interval, p))
+ return -EFAULT;
+
+ if (geodewdt_set_heartbeat(interval))
+ return -EINVAL;
+
+/* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, p);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, ret = -EINVAL;
+
+ if (get_user(options, p))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ geodewdt_disable();
+ ret = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ geodewdt_ping();
+ ret = 0;
+ }
+
+ return ret;
+ }
+ default:
+ return -ENOTTY;
+ }
+
+ return 0;
+}
+
+static const struct file_operations geodewdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = geodewdt_write,
+ .ioctl = geodewdt_ioctl,
+ .open = geodewdt_open,
+ .release = geodewdt_release,
+};
+
+static struct miscdevice geodewdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &geodewdt_fops
+};
+
+static int __devinit
+geodewdt_probe(struct platform_device *dev)
+{
+ int ret, timer;
+
+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+
+ if (timer == -1) {
+ printk(KERN_ERR "geodewdt: No timers were available\n");
+ return -ENODEV;
+ }
+
+ wdt_timer = timer;
+
+ /* Set up the timer */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP,
+ GEODEWDT_SCALE | (3 << 8));
+
+ /* Set up comparator 2 to reset when the event fires */
+ geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1);
+
+ /* Set up the initial timeout */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2,
+ timeout * GEODEWDT_HZ);
+
+ ret = misc_register(&geodewdt_miscdev);
+
+ return ret;
+}
+
+static int __devexit
+geodewdt_remove(struct platform_device *dev)
+{
+ misc_deregister(&geodewdt_miscdev);
+ return 0;
+}
+
+static void
+geodewdt_shutdown(struct platform_device *dev)
+{
+ geodewdt_disable();
+}
+
+static struct platform_driver geodewdt_driver = {
+ .probe = geodewdt_probe,
+ .remove = __devexit_p(geodewdt_remove),
+ .shutdown = geodewdt_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init
+geodewdt_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&geodewdt_driver);
+ if (ret)
+ return ret;
+
+ geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(geodewdt_platform_device)) {
+ ret = PTR_ERR(geodewdt_platform_device);
+ goto err;
+ }
+
+ return 0;
+err:
+ platform_driver_unregister(&geodewdt_driver);
+ return ret;
+}
+
+static void __exit
+geodewdt_exit(void)
+{
+ platform_device_unregister(geodewdt_platform_device);
+ platform_driver_unregister(&geodewdt_driver);
+}
+
+module_init(geodewdt_init);
+module_exit(geodewdt_exit);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
- return NOTIFY_OK;
-
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
- "but unable to determine source.\n");
- } else {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
+ if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral != 0) {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
+ }
}
- return NOTIFY_STOP;
+ die_nmi_called = 0;
+ return NOTIFY_DONE;
}
/*
* 82801HH (ICH8DH) : document number 313056-003, 313057-009,
* 82801HO (ICH8DO) : document number 313056-003, 313057-009,
* 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
- * 82801IB (ICH9) : document number 316972-001, 316973-001,
- * 82801IR (ICH9R) : document number 316972-001, 316973-001,
- * 82801IH (ICH9DH) : document number 316972-001, 316973-001,
+ * 82801IB (ICH9) : document number 316972-001, 316973-006,
+ * 82801IR (ICH9R) : document number 316972-001, 316973-006,
+ * 82801IH (ICH9DH) : document number 316972-001, 316973-006,
+ * 82801IO (ICH9DO) : document number 316972-001, 316973-006,
* 6300ESB (6300ESB) : document number 300641-003, 300884-010,
* 631xESB (631xESB) : document number 313082-001, 313075-005,
* 632xESB (632xESB) : document number 313082-001, 313075-005
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.02"
-#define DRV_RELDATE "26-Jul-2007"
+#define DRV_VERSION "1.03"
+#define DRV_RELDATE "30-Apr-2008"
#define PFX DRV_NAME ": "
/* Includes */
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
+ TCO_ICH9DO, /* ICH9DO */
TCO_631XESB, /* 631xESB/632xESB */
};
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
+ {"ICH9DO", 2},
{"631xESB/632xESB", 2},
{NULL,0}
};
{ ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )},
{ ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
#define WATCHDOG_NAME "w83697hf/hg WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
+#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */
static unsigned long wdt_is_open;
static char expect_close;
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+static int early_disable = WATCHDOG_EARLY_DISABLE;
+module_param(early_disable, int, 0);
+MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+
/*
* Kernel methods.
*/
w83697hf_deselect_wdt();
}
-static int
+static void
wdt_ping(void)
{
spin_lock(&io_lock);
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_enable(void)
{
spin_lock(&io_lock);
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_disable(void)
{
spin_lock(&io_lock);
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
+}
+
+static unsigned char
+wdt_running(void)
+{
+ unsigned char t;
+
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ t = w83697hf_get_reg(0xF4); /* Read timer */
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+
+ return t;
}
static int
}
w83697hf_init();
- wdt_disable(); /* Disable watchdog until first use */
+ if (early_disable) {
+ if (wdt_running())
+ printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+ wdt_disable();
+ }
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
config BINFMT_FLAT
bool "Kernel support for flat binaries"
- depends on !MMU
+ depends on !MMU && (!FRV || BROKEN)
help
Support uClinux FLAT format binaries.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Authors: David Howells <dhowells@redhat.com>
- * David Woodhouse <dwmw2@redhat.com>
+ * David Woodhouse <dwmw2@infradead.org>
*
*/
atomic_inc(&mm->mm_count);
tsk->mm = mm;
tsk->active_mm = mm;
- /*
- * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise
- * it won't work. Update it accordingly if you change it here
- */
switch_mm(active_mm, mm, tsk);
task_unlock(tsk);
#ifndef LINUX_BEFS_ENDIAN
#define LINUX_BEFS_ENDIAN
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
static inline u64
fs64_to_cpu(const struct super_block *sb, fs64 n)
return -EFAULT;
len = strnlen_user((void __user *)p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
- return 0;
+ return -EINVAL;
p += len;
}
if (__put_user(0, argv))
return -EFAULT;
len = strnlen_user((void __user *)p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
- return 0;
+ return -EINVAL;
p += len;
}
if (__put_user(0, envp))
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
- goto cleanup;
+ goto out;
segs = current->mm->map_count;
#ifdef ELF_CORE_EXTRA_PHDRS
set_fs(fs);
cleanup:
- kfree(elf);
free_note_info(&info);
+ kfree(elf);
+out:
return has_dumped;
}
}
/* expand the stack mapping to use up the entire allocation granule */
- fullsize = ksize((char *) current->mm->start_brk);
+ fullsize = kobjsize((char *) current->mm->start_brk);
if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
fullsize, 0, 0)))
stack_size = fullsize;
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (realdatastart && (realdatastart < (unsigned long)-4096)) {
- reallen = ksize((void *)realdatastart);
+ reallen = kobjsize((void *)realdatastart);
if (reallen > len) {
realdatastart = do_mremap(realdatastart, len,
reallen, MREMAP_FIXED, realdatastart);
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (textpos && (textpos < (unsigned long) -4096)) {
- reallen = ksize((void *)textpos);
+ reallen = kobjsize((void *)textpos);
if (reallen > len) {
textpos = do_mremap(textpos, len, reallen,
MREMAP_FIXED, textpos);
*/
current->mm->start_brk = datapos + data_len + bss_len;
current->mm->brk = (current->mm->start_brk + 3) & ~3;
- current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len;
+ current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len;
}
if (flags & FLAT_FLAG_KTRACE)
/* zero the BSS, BRK and stack areas */
memset((void*)(datapos + data_len), 0, bss_len +
- (memp + ksize((void *) memp) - stack_len - /* end brk */
+ (memp + kobjsize((void *) memp) - stack_len - /* end brk */
libinfo->lib_list[id].start_brk) + /* start brk */
stack_len);
#include <linux/kmod.h>
#include <linux/major.h>
#include <linux/smp_lock.h>
+#include <linux/device_cgroup.h>
#include <linux/highmem.h>
#include <linux/blkdev.h>
#include <linux/module.h>
{
struct module *owner = NULL;
struct gendisk *disk;
- int ret = -ENXIO;
+ int ret;
int part;
+ ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode);
+ if (ret != 0)
+ return ret;
+
+ ret = -ENXIO;
file->f_mapping = bdev->bd_inode->i_mapping;
lock_kernel();
disk = get_gendisk(bdev->bd_dev, &part);
Kazeon team for various fixes especially for 2.4 version.
Asser Ferno (Change Notify support)
Shaggy (Dave Kleikamp) for inumerable small fs suggestions and some good cleanup
+Igor Mammedov (DFS support)
Test case and Bug Report contributors
-------------------------------------
Version 1.53
------------
+DFS support added (Microsoft Distributed File System client support needed
+for referrals which enable a hierarchical name space among servers).
Version 1.52
------------
cifsacl flag). Fix prefixpath path separator so we can handle mounts
with prefixpaths longer than one directory (one path component) when
mounted to Windows servers. Fix slow file open when cifsacl
-enabled.
+enabled. Fix memory leak in FindNext when the SMB call returns -EBADF.
+
Version 1.51
------------
sign Must use packet signing (helps avoid unwanted data modification
by intermediate systems in the route). Note that signing
does not work with lanman or plaintext authentication.
+ seal Must seal (encrypt) all data on this mounted share before
+ sending on the network. Requires support for Unix Extensions.
+ Note that this differs from the sign mount option in that it
+ causes encryption of data sent over this mounted share but other
+ shares mounted to the same server are unaffected.
sec Security mode. Allowed values are:
none attempt to connection as a null user (no name)
krb5 Use Kerberos version 5 authentication
-Version 1.52 January 3, 2008
+Version 1.53 May 20, 2008
A Partial List of Missing Features
==================================
fs/cifs/connect.c and add back in NTLMSSP code if any servers
need it
-e) ms-dfs and ms-dfs host name resolution cleanup
-
-f) fix NTLMv2 signing when two mounts with different users to same
+e) fix NTLMv2 signing when two mounts with different users to same
server.
-g) Directory entry caching relies on a 1 second timer, rather than
+f) Directory entry caching relies on a 1 second timer, rather than
using FindNotify or equivalent. - (started)
-h) quota support (needs minor kernel change since quota calls
+g) quota support (needs minor kernel change since quota calls
to make it to network filesystems or deviceless filesystems)
-i) investigate sync behavior (including syncpage) and check
+h) investigate sync behavior (including syncpage) and check
for proper behavior of intr/nointr
+i) improve support for very old servers (OS/2 and Win9x for example)
+Including support for changing the time remotely (utimes command).
+
j) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
extra copy in/out of the socket buffers in some cases.
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL)
return 0;
}
-static char *build_full_dfs_path_from_dentry(struct dentry *dentry)
-{
- char *full_path = NULL;
- char *search_path;
- char *tmp_path;
- size_t l_max_len;
- struct cifs_sb_info *cifs_sb;
-
- if (dentry->d_inode == NULL)
- return NULL;
-
- cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
-
- if (cifs_sb->tcon == NULL)
- return NULL;
-
- search_path = build_path_from_dentry(dentry);
- if (search_path == NULL)
- return NULL;
-
- if (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS) {
- int i;
- /* we should use full path name for correct working with DFS */
- l_max_len = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE+1) +
- strnlen(search_path, MAX_PATHCONF) + 1;
- tmp_path = kmalloc(l_max_len, GFP_KERNEL);
- if (tmp_path == NULL) {
- kfree(search_path);
- return NULL;
- }
- strncpy(tmp_path, cifs_sb->tcon->treeName, l_max_len);
- tmp_path[l_max_len-1] = 0;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < l_max_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncat(tmp_path, search_path, l_max_len - strlen(tmp_path));
-
- full_path = tmp_path;
- kfree(search_path);
- } else {
- full_path = search_path;
- }
- return full_path;
-}
-
static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
struct list_head *mntlist)
{
goto out_err;
}
- full_path = build_full_dfs_path_from_dentry(dentry);
+ full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
rc = -ENOMEM;
goto out_err;
#define CIFS_MOUNT_CIFS_ACL 0x200 /* send ACL requests to non-POSIX srv */
#define CIFS_MOUNT_OVERR_UID 0x400 /* override uid returned from server */
#define CIFS_MOUNT_OVERR_GID 0x800 /* override gid returned from server */
+#define CIFS_MOUNT_DYNPERM 0x1000 /* allow in-memory only mode setting */
struct cifs_sb_info {
struct cifsTconInfo *tcon; /* primary mount */
dp = description + strlen(description);
sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
+ dp = description + strlen(description);
+ sprintf(dp, ";user=%s", sesInfo->userName);
+
cFYI(1, ("key description = %s", description));
spnego_key = request_key(&cifs_spnego_key_type, description, "");
/*
* fs/cifs/cifsfs.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Common Internet FileSystem (CIFS) client
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
!(cifs_sb->tcon->unix_ext))
seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (!cifs_sb->tcon->unix_ext) {
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ cifs_sb->mnt_file_mode,
+ cifs_sb->mnt_dir_mode);
+ }
+ if (cifs_sb->tcon->seal)
+ seq_printf(s, ",seal");
+ if (cifs_sb->tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (cifs_sb->tcon->retry)
+ seq_printf(s, ",hard");
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
+
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
}
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
#ifdef CONFIG_CIFS_EXPERIMENTAL
.dir_notify = cifs_dir_notify,
#endif /* CONFIG_CIFS_EXPERIMENTAL */
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
};
static void
size_t, int);
extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t);
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
-extern int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg);
+extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_CIFS_EXPERIMENTAL
extern const struct export_operations cifs_export_ops;
bool ipc:1; /* set if connection to IPC$ eg for RPC/PIPES */
bool retry:1;
bool nocase:1;
+ bool seal:1; /* transport encryption for this mounted share */
bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol
for this mount even if server would support */
/* BB add field for back pointer to sb struct(s)? */
char RequestFileName[1];
} __attribute__((packed)) TRANSACTION2_GET_DFS_REFER_REQ;
+#define DFS_VERSION cpu_to_le16(0x0003)
+
+/* DFS server target type */
+#define DFS_TYPE_LINK 0x0000 /* also for sysvol targets */
+#define DFS_TYPE_ROOT 0x0001
+
+/* Referral Entry Flags */
+#define DFS_NAME_LIST_REF 0x0200
+
typedef struct dfs_referral_level_3 {
__le16 VersionNumber;
- __le16 ReferralSize;
- __le16 ServerType; /* 0x0001 = CIFS server */
- __le16 ReferralFlags; /* or proximity - not clear which since it is
- always set to zero - SNIA spec says 0x01
- means strip off PathConsumed chars before
- submitting RequestFileName to remote node */
- __le16 TimeToLive;
- __le16 Proximity;
+ __le16 Size;
+ __le16 ServerType; /* 0x0001 = root targets; 0x0000 = link targets */
+ __le16 ReferralEntryFlags; /* 0x0200 bit set only for domain
+ or DC referral responce */
+ __le32 TimeToLive;
__le16 DfsPathOffset;
__le16 DfsAlternatePathOffset;
- __le16 NetworkAddressOffset;
+ __le16 NetworkAddressOffset; /* offset of the link target */
+ __le16 ServiceSiteGuid;
} __attribute__((packed)) REFERRAL3;
typedef struct smb_com_transaction_get_dfs_refer_rsp {
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
- FILE_ALL_INFO * pfile_info,
+ FILE_ALL_INFO *pfile_info,
struct super_block *sb, int xid, const __u16 *pfid);
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_ALL_INFO * findData,
+ FILE_ALL_INFO *findData,
int legacy /* whether to use old info level */,
const struct nls_table *nls_codepage, int remap);
extern int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon,
extern int CIFSSMBUnixQPathInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap);
extern int CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *number_of_nodes_in_array,
const struct nls_table *nls_codepage, int remap);
-extern int connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path,
- const struct nls_table *nls_codepage, int remap);
extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
const char *old_path,
const struct nls_table *nls_codepage,
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
+/* Allocates buffer into dst and copies smb string from src to it.
+ * caller is responsible for freeing dst if function returned 0.
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
+ const bool is_unicode, const struct nls_table *nls_codepage)
+{
+ int plen;
+
+ if (is_unicode) {
+ plen = UniStrnlen((wchar_t *)src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
+ } else {
+ plen = strnlen(src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ strncpy(*dst, src, plen);
+ }
+ (*dst)[plen] = 0;
+ (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
+ return 0;
+
+cifs_strncpy_to_host_ErrExit:
+ cERROR(1, ("Failed to allocate buffer for string\n"));
+ return -ENOMEM;
+}
+
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
return ofun;
}
+static int
+access_flags_to_smbopen_mode(const int access_flags)
+{
+ int masked_flags = access_flags & (GENERIC_READ | GENERIC_WRITE);
+
+ if (masked_flags == GENERIC_READ)
+ return SMBOPEN_READ;
+ else if (masked_flags == GENERIC_WRITE)
+ return SMBOPEN_WRITE;
+
+ /* just go for read/write */
+ return SMBOPEN_READWRITE;
+}
+
int
SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int openDisposition,
pSMB->OpenFlags = cpu_to_le16(REQ_BATCHOPLOCK);
pSMB->OpenFlags |= cpu_to_le16(REQ_MORE_INFO);
- /* BB fixme add conversion for access_flags to bits 0 - 2 of mode */
- /* 0 = read
- 1 = write
- 2 = rw
- 3 = execute
- */
- pSMB->Mode = cpu_to_le16(2);
+ pSMB->Mode = cpu_to_le16(access_flags_to_smbopen_mode(access_flags));
pSMB->Mode |= cpu_to_le16(0x40); /* deny none */
/* set file as system file if special file such
as fifo and server expecting SFU style and
} else {
/* BB verify if wct == 15 */
-/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field BB */
+/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field*/
*netfid = pSMBr->Fid; /* cifs fid stays in le */
/* Let caller know file was created so we can set the mode. */
cFYI(1, ("Posix Lock"));
if (pLockData == NULL)
- return EINVAL;
+ return -EINVAL;
rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2],
+ cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
cFYI(1, ("Send error in copy = %d with %d files copied",
rc, le16_to_cpu(pSMBr->CopyCount)));
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto copyRetry;
if (rc)
cFYI(1, ("Send error in SetPathInfo create symlink = %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto createSymLinkRetry;
}
params = 6 + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB size from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
int
CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap)
{
/* SMB_QUERY_FILE_UNIX_BASIC */
if (rc) {
if (rc == -EBADF) {
psrch_inf->endOfSearch = true;
+ cifs_buf_release(pSMB);
rc = 0; /* search probably was closed at end of search*/
} else
cFYI(1, ("FindNext returned = %d", rc));
return rc;
}
+/* parses DFS refferal V3 structure
+ * caller is responsible for freeing target_nodes
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
+ unsigned int *num_of_nodes,
+ struct dfs_info3_param **target_nodes,
+ const struct nls_table *nls_codepage)
+{
+ int i, rc = 0;
+ char *data_end;
+ bool is_unicode;
+ struct dfs_referral_level_3 *ref;
+
+ is_unicode = pSMBr->hdr.Flags2 & SMBFLG2_UNICODE;
+ *num_of_nodes = le16_to_cpu(pSMBr->NumberOfReferrals);
+
+ if (*num_of_nodes < 1) {
+ cERROR(1, ("num_referrals: must be at least > 0,"
+ "but we get num_referrals = %d\n", *num_of_nodes));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
+ if (ref->VersionNumber != cpu_to_le16(3)) {
+ cERROR(1, ("Referrals of V%d version are not supported,"
+ "should be V3", le16_to_cpu(ref->VersionNumber)));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* get the upper boundary of the resp buffer */
+ data_end = (char *)(&(pSMBr->PathConsumed)) +
+ le16_to_cpu(pSMBr->t2.DataCount);
+
+ cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
+ *num_of_nodes,
+ le16_to_cpu(pSMBr->DFSFlags)));
+
+ *target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
+ *num_of_nodes, GFP_KERNEL);
+ if (*target_nodes == NULL) {
+ cERROR(1, ("Failed to allocate buffer for target_nodes\n"));
+ rc = -ENOMEM;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* collect neccessary data from referrals */
+ for (i = 0; i < *num_of_nodes; i++) {
+ char *temp;
+ int max_len;
+ struct dfs_info3_param *node = (*target_nodes)+i;
+
+ node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->path_consumed = le16_to_cpu(pSMBr->PathConsumed);
+ node->server_type = le16_to_cpu(ref->ServerType);
+ node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags);
+
+ /* copy DfsPath */
+ temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->path_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ /* copy link target UNC */
+ temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->node_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ ref += le16_to_cpu(ref->Size);
+ }
+
+parse_DFS_referrals_exit:
+ if (rc) {
+ free_dfs_info_array(*target_nodes, *num_of_nodes);
+ *target_nodes = NULL;
+ *num_of_nodes = 0;
+ }
+ return rc;
+}
+
int
CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *num_of_nodes,
const struct nls_table *nls_codepage, int remap)
{
/* TRANS2_GET_DFS_REFERRAL */
TRANSACTION2_GET_DFS_REFER_REQ *pSMB = NULL;
TRANSACTION2_GET_DFS_REFER_RSP *pSMBr = NULL;
- struct dfs_referral_level_3 *referrals = NULL;
int rc = 0;
int bytes_returned;
int name_len;
- unsigned int i;
- char *temp;
__u16 params, byte_count;
- *number_of_UNC_in_array = 0;
- *targetUNCs = NULL;
+ *num_of_nodes = 0;
+ *target_nodes = NULL;
cFYI(1, ("In GetDFSRefer the path %s", searchName));
if (ses == NULL)
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = 0;
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in GetDFSRefer = %d", rc));
- } else { /* decode response */
-/* BB Add logic to parse referrals here */
- rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+ goto GetDFSRefExit;
+ }
+ rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- /* BB Also check if enough total bytes returned? */
- if (rc || (pSMBr->ByteCount < 17))
- rc = -EIO; /* bad smb */
- else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 data_count = le16_to_cpu(pSMBr->t2.DataCount);
+ /* BB Also check if enough total bytes returned? */
+ if (rc || (pSMBr->ByteCount < 17)) {
+ rc = -EIO; /* bad smb */
+ goto GetDFSRefExit;
+ }
- cFYI(1,
- ("Decoding GetDFSRefer response BCC: %d Offset %d",
- pSMBr->ByteCount, data_offset));
- referrals =
- (struct dfs_referral_level_3 *)
- (8 /* sizeof start of data block */ +
- data_offset +
- (char *) &pSMBr->hdr.Protocol);
- cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n"
- "for referral one refer size: 0x%x srv "
- "type: 0x%x refer flags: 0x%x ttl: 0x%x",
- le16_to_cpu(pSMBr->NumberOfReferrals),
- le16_to_cpu(pSMBr->DFSFlags),
- le16_to_cpu(referrals->ReferralSize),
- le16_to_cpu(referrals->ServerType),
- le16_to_cpu(referrals->ReferralFlags),
- le16_to_cpu(referrals->TimeToLive)));
- /* BB This field is actually two bytes in from start of
- data block so we could do safety check that DataBlock
- begins at address of pSMBr->NumberOfReferrals */
- *number_of_UNC_in_array =
- le16_to_cpu(pSMBr->NumberOfReferrals);
-
- /* BB Fix below so can return more than one referral */
- if (*number_of_UNC_in_array > 1)
- *number_of_UNC_in_array = 1;
-
- /* get the length of the strings describing refs */
- name_len = 0;
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- /* make sure that DfsPathOffset not past end */
- __u16 offset =
- le16_to_cpu(referrals->DfsPathOffset);
- if (offset > data_count) {
- /* if invalid referral, stop here and do
- not try to copy any more */
- *number_of_UNC_in_array = i;
- break;
- }
- temp = ((char *)referrals) + offset;
+ cFYI(1, ("Decoding GetDFSRefer response BCC: %d Offset %d",
+ pSMBr->ByteCount,
+ le16_to_cpu(pSMBr->t2.DataOffset)));
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len += UniStrnlen((wchar_t *)temp,
- data_count);
- } else {
- name_len += strnlen(temp, data_count);
- }
- referrals++;
- /* BB add check that referral pointer does
- not fall off end PDU */
- }
- /* BB add check for name_len bigger than bcc */
- *targetUNCs =
- kmalloc(name_len+1+(*number_of_UNC_in_array),
- GFP_KERNEL);
- if (*targetUNCs == NULL) {
- rc = -ENOMEM;
- goto GetDFSRefExit;
- }
- /* copy the ref strings */
- referrals = (struct dfs_referral_level_3 *)
- (8 /* sizeof data hdr */ + data_offset +
- (char *) &pSMBr->hdr.Protocol);
-
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- temp = ((char *)referrals) +
- le16_to_cpu(referrals->DfsPathOffset);
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- cifs_strfromUCS_le(*targetUNCs,
- (__le16 *) temp,
- name_len,
- nls_codepage);
- } else {
- strncpy(*targetUNCs, temp, name_len);
- }
- /* BB update target_uncs pointers */
- referrals++;
- }
- temp = *targetUNCs;
- temp[name_len] = 0;
- }
+ /* parse returned result into more usable form */
+ rc = parse_DFS_referrals(pSMBr, num_of_nodes,
+ target_nodes, nls_codepage);
- }
GetDFSRefExit:
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto getDFSRetry;
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
offset = param_offset + params;
pSMB->MaxParameterCount = cpu_to_le16(4);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FS_INFORMATION);
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
count = sizeof(struct file_end_of_file_info);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
params = 6 + name_len;
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
params = 6 + name_len;
count = sizeof(FILE_UNIX_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
if (rc)
cFYI(1, ("SetPathInfo (perms) returned %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto setPermsRetry;
return rc;
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QAllEAsRetry;
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QEARetry;
count = sizeof(*parm_data) + ea_value_len + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
char *domainname;
char *UNC;
char *UNCip;
- char *in6_addr; /* ipv6 address as human readable form of in6_addr */
+ char *in6_addr; /* ipv6 address as human readable form of in6_addr */
char *iocharset; /* local code page for mapping to and from Unicode */
char source_rfc1001_name[16]; /* netbios name of client */
char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
bool setuids:1;
bool override_uid:1;
bool override_gid:1;
+ bool dynperm:1;
bool noperm:1;
bool no_psx_acl:1; /* set if posix acl support should be disabled */
bool cifs_acl:1;
bool no_xattr:1; /* set if xattr (EA) support should be disabled*/
bool server_ino:1; /* use inode numbers from server ie UniqueId */
bool direct_io:1;
- bool remap:1; /* set to remap seven reserved chars in filenames */
- bool posix_paths:1; /* unset to not ask for posix pathnames. */
+ bool remap:1; /* set to remap seven reserved chars in filenames */
+ bool posix_paths:1; /* unset to not ask for posix pathnames. */
bool no_linux_ext:1;
bool sfu_emul:1;
- bool nullauth:1; /* attempt to authenticate with null user */
- unsigned nocase; /* request case insensitive filenames */
- unsigned nobrl; /* disable sending byte range locks to srv */
+ bool nullauth:1; /* attempt to authenticate with null user */
+ bool nocase:1; /* request case insensitive filenames */
+ bool nobrl:1; /* disable sending byte range locks to srv */
+ bool seal:1; /* request transport encryption on share */
unsigned int rsize;
unsigned int wsize;
unsigned int sockopt;
vol->setuids = 1;
} else if (strnicmp(data, "nosetuids", 9) == 0) {
vol->setuids = 0;
+ } else if (strnicmp(data, "dynperm", 7) == 0) {
+ vol->dynperm = true;
+ } else if (strnicmp(data, "nodynperm", 9) == 0) {
+ vol->dynperm = false;
} else if (strnicmp(data, "nohard", 6) == 0) {
vol->retry = 0;
} else if (strnicmp(data, "nosoft", 6) == 0) {
vol->no_psx_acl = 1;
} else if (strnicmp(data, "sign", 4) == 0) {
vol->secFlg |= CIFSSEC_MUST_SIGN;
-/* } else if (strnicmp(data, "seal",4) == 0) {
- vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ } else if (strnicmp(data, "seal", 4) == 0) {
+ /* we do not do the following in secFlags because seal
+ is a per tree connection (mount) not a per socket
+ or per-smb connection option in the protocol */
+ /* vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ vol->seal = 1;
} else if (strnicmp(data, "direct", 6) == 0) {
vol->direct_io = 1;
} else if (strnicmp(data, "forcedirectio", 13) == 0) {
return NULL;
}
-int
-connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path, const struct nls_table *nls_codepage,
- int remap)
-{
- struct dfs_info3_param *referrals = NULL;
- unsigned int num_referrals;
- int rc = 0;
-
- rc = get_dfs_path(xid, pSesInfo, old_path, nls_codepage,
- &num_referrals, &referrals, remap);
-
- /* BB Add in code to: if valid refrl, if not ip address contact
- the helper that resolves tcp names, mount to it, try to
- tcon to it unmount it if fail */
-
- kfree(referrals);
-
- return rc;
-}
-
int
get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
const struct nls_table *nls_codepage, unsigned int *pnum_referrals,
{
char *temp_unc;
int rc = 0;
- unsigned char *targetUNCs;
*pnum_referrals = 0;
*preferrals = NULL;
kfree(temp_unc);
}
if (rc == 0)
- rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, &targetUNCs,
+ rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, preferrals,
pnum_referrals, nls_codepage, remap);
/* BB map targetUNCs to dfs_info3 structures, here or
in CIFSGetDFSRefer BB */
if (path == NULL)
return;
- if (delim == '/')
+ if (delim == '/')
old_delim = '\\';
else
old_delim = '/';
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
if (volume_info.override_gid)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
+ if (volume_info.dynperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
if (volume_info.direct_io) {
cFYI(1, ("mounting share using direct i/o"));
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
for the retry flag is used */
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ if (tcon->seal != volume_info.seal)
+ cERROR(1, ("transport encryption setting "
+ "conflicts with existing tid"));
} else {
tcon = tconInfoAlloc();
if (tcon == NULL)
if ((strchr(volume_info.UNC + 3, '\\') == NULL)
&& (strchr(volume_info.UNC + 3, '/') ==
NULL)) {
- rc = connect_to_dfs_path(xid, pSesInfo,
+/* rc = connect_to_dfs_path(xid, pSesInfo,
"", cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFS_MOUNT_MAP_SPECIAL_CHR);*/
+ cFYI(1, ("DFS root not supported"));
rc = -ENODEV;
goto out;
} else {
atomic_inc(&pSesInfo->inUse);
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ tcon->seal = volume_info.seal;
}
}
}
user = ses->userName;
domain = ses->domainName;
smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
+
+ if (smb_buffer == NULL)
return -ENOMEM;
- }
+
smb_buffer_response = smb_buffer;
pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
struct dentry *temp;
int namelen;
int pplen;
+ int dfsplen;
char *full_path;
char dirsep;
+ struct cifs_sb_info *cifs_sb;
if (direntry == NULL)
return NULL; /* not much we can do if dentry is freed and
we need to reopen the file after it was closed implicitly
when the server crashed */
- dirsep = CIFS_DIR_SEP(CIFS_SB(direntry->d_sb));
- pplen = CIFS_SB(direntry->d_sb)->prepathlen;
+ cifs_sb = CIFS_SB(direntry->d_sb);
+ dirsep = CIFS_DIR_SEP(cifs_sb);
+ pplen = cifs_sb->prepathlen;
+ if (cifs_sb->tcon && (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS))
+ dfsplen = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE + 1);
+ else
+ dfsplen = 0;
cifs_bp_rename_retry:
- namelen = pplen;
+ namelen = pplen + dfsplen;
for (temp = direntry; !IS_ROOT(temp);) {
namelen += (1 + temp->d_name.len);
temp = temp->d_parent;
return NULL;
}
}
- if (namelen != pplen) {
+ if (namelen != pplen + dfsplen) {
cERROR(1,
("did not end path lookup where expected namelen is %d",
namelen));
since the '\' is a valid posix character so we can not switch
those safely to '/' if any are found in the middle of the prepath */
/* BB test paths to Windows with '/' in the midst of prepath */
- strncpy(full_path, CIFS_SB(direntry->d_sb)->prepath, pplen);
+
+ if (dfsplen) {
+ strncpy(full_path, cifs_sb->tcon->treeName, dfsplen);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < dfsplen; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+ }
+ strncpy(full_path + dfsplen, CIFS_SB(direntry->d_sb)->prepath, pplen);
return full_path;
}
* case take precedence. If a is not a negative dentry, this
* should have no side effects
*/
- memcpy(a->name, b->name, a->len);
+ memcpy((void *)a->name, b->name, a->len);
return 0;
}
return 1;
rkey = request_key(&key_type_dns_resolver, name, "");
if (!IS_ERR(rkey)) {
data = rkey->payload.data;
- cFYI(1, ("%s: resolved: %s to %s", __func__,
- rkey->description,
- *ip_addr
- ));
} else {
cERROR(1, ("%s: unable to resolve: %s", __func__, name));
goto out;
if (*ip_addr) {
memcpy(*ip_addr, data, len);
(*ip_addr)[len] = '\0';
+ if (!IS_ERR(rkey))
+ cFYI(1, ("%s: resolved: %s to %s", __func__,
+ name,
+ *ip_addr
+ ));
rc = 0;
} else {
rc = -ENOMEM;
return (GENERIC_READ | GENERIC_WRITE);
}
- return 0x20197;
+ return (READ_CONTROL | FILE_WRITE_ATTRIBUTES | FILE_READ_ATTRIBUTES |
+ FILE_WRITE_EA | FILE_APPEND_DATA | FILE_WRITE_DATA |
+ FILE_READ_DATA);
+
+
}
static inline int cifs_get_disposition(unsigned int flags)
spin_unlock(&inode->i_lock);
}
-static const unsigned char *cifs_get_search_path(struct cifs_sb_info *cifs_sb,
- const char *search_path)
-{
- int tree_len;
- int path_len;
- int i;
- char *tmp_path;
- struct cifsTconInfo *pTcon = cifs_sb->tcon;
-
- if (!(pTcon->Flags & SMB_SHARE_IS_IN_DFS))
- return search_path;
- /* use full path name for working with DFS */
- tree_len = strnlen(pTcon->treeName, MAX_TREE_SIZE + 1);
- path_len = strnlen(search_path, MAX_PATHCONF);
-
- tmp_path = kmalloc(tree_len+path_len+1, GFP_KERNEL);
- if (tmp_path == NULL)
- return search_path;
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
+ struct super_block *sb)
+{
+ struct inode *pinode = NULL;
+
+ memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
+
+/* __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
+ __u64 UniqueId = 0; */
+ pfnd_dat->LastStatusChange =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastModificationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
+ pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
+ pfnd_dat->Nlinks = cpu_to_le64(2);
+ if (sb->s_root)
+ pinode = sb->s_root->d_inode;
+ if (pinode == NULL)
+ return;
- strncpy(tmp_path, pTcon->treeName, tree_len);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < tree_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncpy(tmp_path+tree_len, search_path, path_len);
- tmp_path[tree_len+path_len] = 0;
- return tmp_path;
+ /* fill in default values for the remaining based on root
+ inode since we can not query the server for this inode info */
+ pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
+ pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
+ pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
+ pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
}
int cifs_get_inode_info_unix(struct inode **pinode,
- const unsigned char *search_path, struct super_block *sb, int xid)
+ const unsigned char *full_path, struct super_block *sb, int xid)
{
int rc = 0;
- FILE_UNIX_BASIC_INFO findData;
+ FILE_UNIX_BASIC_INFO find_data;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path;
bool is_dfs_referral = false;
+ struct cifsInodeInfo *cifsInfo;
+ __u64 num_of_bytes;
+ __u64 end_of_file;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBUnixQPathInfo:
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &findData,
+ rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-/* dump_mem("\nUnixQPathInfo return data", &findData,
- sizeof(findData)); */
if (rc) {
if (rc == -EREMOTE && !is_dfs_referral) {
is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBUnixQPathInfo;
+ cFYI(DBG2, ("DFS ref"));
+ /* for DFS, server does not give us real inode data */
+ fill_fake_finddataunix(&find_data, sb);
+ rc = 0;
}
- goto cgiiu_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
- __u64 end_of_file = le64_to_cpu(findData.EndOfFile);
+ }
+ num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
+ end_of_file = le64_to_cpu(find_data.EndOfFile);
- /* get new inode */
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgiiu_exit;
- }
- /* Is an i_ino of zero legal? */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- (*pinode)->i_ino =
- (unsigned long)findData.UniqueId;
- } /* note ino incremented to unique num in new_inode */
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(*pinode);
+ rc = -ENOMEM;
+ goto cgiiu_exit;
}
+ /* Is an i_ino of zero legal? */
+ /* note ino incremented to unique num in new_inode */
+ /* Are there sanity checks we can use to ensure that
+ the server is really filling in that field? */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
- /* this is ok to set on every inode revalidate */
- atomic_set(&cifsInfo->inUse, 1);
+ insert_inode_hash(*pinode);
+ }
- cifs_unix_info_to_inode(inode, &findData, 0);
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+ /* this is ok to set on every inode revalidate */
+ atomic_set(&cifsInfo->inUse, 1);
- if (num_of_bytes < end_of_file)
- cFYI(1, ("allocation size less than end of file"));
- cFYI(1, ("Size %ld and blocks %llu",
- (unsigned long) inode->i_size,
- (unsigned long long)inode->i_blocks));
+ cifs_unix_info_to_inode(inode, &find_data, 0);
- cifs_set_ops(inode, is_dfs_referral);
- }
+ if (num_of_bytes < end_of_file)
+ cFYI(1, ("allocation size less than end of file"));
+ cFYI(1, ("Size %ld and blocks %llu",
+ (unsigned long) inode->i_size,
+ (unsigned long long)inode->i_blocks));
+
+ cifs_set_ops(inode, is_dfs_referral);
cgiiu_exit:
- if (full_path != search_path)
- kfree(full_path);
return rc;
}
#endif
}
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
+ struct super_block *sb)
+{
+ memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
+
+/* __le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
+ __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __u8 pfnd_dat->DeletePending = 0;
+ __u8 pfnd_data->Directory = 0;
+ __le32 pfnd_dat->EASize = 0;
+ __u64 pfnd_dat->IndexNumber = 0;
+ __u64 pfnd_dat->IndexNumber1 = 0; */
+ pfnd_dat->CreationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastWriteTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->ChangeTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
+ pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+}
+
int cifs_get_inode_info(struct inode **pinode,
- const unsigned char *search_path, FILE_ALL_INFO *pfindData,
+ const unsigned char *full_path, FILE_ALL_INFO *pfindData,
struct super_block *sb, int xid, const __u16 *pfid)
{
int rc = 0;
+ __u32 attr;
+ struct cifsInodeInfo *cifsInfo;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path = NULL;
char *buf = NULL;
bool adjustTZ = false;
bool is_dfs_referral = false;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
if ((pfindData == NULL) && (*pinode != NULL)) {
if (CIFS_I(*pinode)->clientCanCacheRead) {
return -ENOMEM;
pfindData = (FILE_ALL_INFO *)buf;
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBQPathInfo:
/* could do find first instead but this returns more info */
rc = CIFSSMBQPathInfo(xid, pTcon, full_path, pfindData,
0 /* not legacy */,
}
}
/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
- if (rc) {
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBQPathInfo;
- }
+ if (rc == -EREMOTE) {
+ is_dfs_referral = true;
+ fill_fake_finddata(pfindData, sb);
+ rc = 0;
+ } else if (rc)
goto cgii_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u32 attr = le32_to_cpu(pfindData->Attributes);
- /* get new inode */
- if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
- /* Is an i_ino of zero legal? Can we use that to check
- if the server supports returning inode numbers? Are
- there other sanity checks we can use to ensure that
- the server is really filling in that field? */
+ attr = le32_to_cpu(pfindData->Attributes);
- /* We can not use the IndexNumber field by default from
- Windows or Samba (in ALL_INFO buf) but we can request
- it explicitly. It may not be unique presumably if
- the server has multiple devices mounted under one
- share */
-
- /* There may be higher info levels that work but are
- there Windows server or network appliances for which
- IndexNumber field is not guaranteed unique? */
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- int rc1 = 0;
- __u64 inode_num;
-
- rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- search_path, &inode_num,
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgii_exit;
+ }
+ /* Is an i_ino of zero legal? Can we use that to check
+ if the server supports returning inode numbers? Are
+ there other sanity checks we can use to ensure that
+ the server is really filling in that field? */
+
+ /* We can not use the IndexNumber field by default from
+ Windows or Samba (in ALL_INFO buf) but we can request
+ it explicitly. It may not be unique presumably if
+ the server has multiple devices mounted under one share */
+
+ /* There may be higher info levels that work but are
+ there Windows server or network appliances for which
+ IndexNumber field is not guaranteed unique? */
+
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ int rc1 = 0;
+ __u64 inode_num;
+
+ rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
+ full_path, &inode_num,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc1) {
- cFYI(1, ("GetSrvInodeNum rc %d", rc1));
- /* BB EOPNOSUPP disable SERVER_INUM? */
- } else /* do we need cast or hash to ino? */
- (*pinode)->i_ino = inode_num;
- } /* else ino incremented to unique num in new_inode*/
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- insert_inode_hash(*pinode);
- }
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
- cifsInfo->cifsAttrs = attr;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* Linux can not store file creation time so ignore it */
- if (pfindData->LastAccessTime)
- inode->i_atime = cifs_NTtimeToUnix
- (le64_to_cpu(pfindData->LastAccessTime));
- else /* do not need to use current_fs_time - time not stored */
- inode->i_atime = CURRENT_TIME;
- inode->i_mtime =
+ if (rc1) {
+ cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ /* BB EOPNOSUPP disable SERVER_INUM? */
+ } else /* do we need cast or hash to ino? */
+ (*pinode)->i_ino = inode_num;
+ } /* else ino incremented to unique num in new_inode*/
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
+ insert_inode_hash(*pinode);
+ }
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+ cifsInfo->cifsAttrs = attr;
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+
+ /* blksize needs to be multiple of two. So safer to default to
+ blksize and blkbits set in superblock so 2**blkbits and blksize
+ will match rather than setting to:
+ (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
+
+ /* Linux can not store file creation time so ignore it */
+ if (pfindData->LastAccessTime)
+ inode->i_atime = cifs_NTtimeToUnix
+ (le64_to_cpu(pfindData->LastAccessTime));
+ else /* do not need to use current_fs_time - time not stored */
+ inode->i_atime = CURRENT_TIME;
+ inode->i_mtime =
cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
- inode->i_ctime =
- cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
- cFYI(0, ("Attributes came in as 0x%x", attr));
- if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
- inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
- inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
- }
+ inode->i_ctime =
+ cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
+ cFYI(DBG2, ("Attributes came in as 0x%x", attr));
+ if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
+ inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
+ inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
+ }
- /* set default mode. will override for dirs below */
- if (atomic_read(&cifsInfo->inUse) == 0)
- /* new inode, can safely set these fields */
- inode->i_mode = cifs_sb->mnt_file_mode;
- else /* since we set the inode type below we need to mask off
- to avoid strange results if type changes and both
- get orred in */
- inode->i_mode &= ~S_IFMT;
-/* if (attr & ATTR_REPARSE) */
- /* We no longer handle these as symlinks because we could not
- follow them due to the absolute path with drive letter */
- if (attr & ATTR_DIRECTORY) {
- /* override default perms since we do not do byte range locking
- on dirs */
- inode->i_mode = cifs_sb->mnt_dir_mode;
- inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
- /* No need to le64 convert size of zero */
- (pfindData->EndOfFile == 0)) {
- inode->i_mode = cifs_sb->mnt_file_mode;
- inode->i_mode |= S_IFIFO;
+ /* set default mode. will override for dirs below */
+ if (atomic_read(&cifsInfo->inUse) == 0)
+ /* new inode, can safely set these fields */
+ inode->i_mode = cifs_sb->mnt_file_mode;
+ else /* since we set the inode type below we need to mask off
+ to avoid strange results if type changes and both
+ get orred in */
+ inode->i_mode &= ~S_IFMT;
+/* if (attr & ATTR_REPARSE) */
+ /* We no longer handle these as symlinks because we could not
+ follow them due to the absolute path with drive letter */
+ if (attr & ATTR_DIRECTORY) {
+ /* override default perms since we do not do byte range locking
+ on dirs */
+ inode->i_mode = cifs_sb->mnt_dir_mode;
+ inode->i_mode |= S_IFDIR;
+ } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
+ (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
+ /* No need to le64 convert size of zero */
+ (pfindData->EndOfFile == 0)) {
+ inode->i_mode = cifs_sb->mnt_file_mode;
+ inode->i_mode |= S_IFIFO;
/* BB Finish for SFU style symlinks and devices */
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
- if (decode_sfu_inode(inode,
- le64_to_cpu(pfindData->EndOfFile),
- search_path,
- cifs_sb, xid))
- cFYI(1, ("Unrecognized sfu inode type"));
-
- cFYI(1, ("sfu mode 0%o", inode->i_mode));
- } else {
- inode->i_mode |= S_IFREG;
- /* treat the dos attribute of read-only as read-only
- mode e.g. 555 */
- if (cifsInfo->cifsAttrs & ATTR_READONLY)
- inode->i_mode &= ~(S_IWUGO);
- else if ((inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been */
- /* changed on server -- set any w bits */
- /* allowed by mnt_file_mode */
- inode->i_mode |= (S_IWUGO &
- cifs_sb->mnt_file_mode);
- /* BB add code here -
- validate if device or weird share or device type? */
- }
+ } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
+ (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
+ if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile),
+ full_path, cifs_sb, xid))
+ cFYI(1, ("Unrecognized sfu inode type"));
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
- /* can not safely shrink the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
-
- /* 512 bytes (2**9) is the fake blocksize that must be
- used for this calculation */
- inode->i_blocks = (512 - 1 + le64_to_cpu(
- pfindData->AllocationSize)) >> 9;
- }
- spin_unlock(&inode->i_lock);
+ cFYI(1, ("sfu mode 0%o", inode->i_mode));
+ } else {
+ inode->i_mode |= S_IFREG;
+ /* treat dos attribute of read-only as read-only mode eg 555 */
+ if (cifsInfo->cifsAttrs & ATTR_READONLY)
+ inode->i_mode &= ~(S_IWUGO);
+ else if ((inode->i_mode & S_IWUGO) == 0)
+ /* the ATTR_READONLY flag may have been */
+ /* changed on server -- set any w bits */
+ /* allowed by mnt_file_mode */
+ inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
+ /* BB add code to validate if device or weird share or device type? */
+ }
+
+ spin_lock(&inode->i_lock);
+ if (is_size_safe_to_change(cifsInfo,
+ le64_to_cpu(pfindData->EndOfFile))) {
+ /* can not safely shrink the file size here if the
+ client is writing to it due to potential races */
+ i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+
+ /* 512 bytes (2**9) is the fake blocksize that must be
+ used for this calculation */
+ inode->i_blocks = (512 - 1 + le64_to_cpu(
+ pfindData->AllocationSize)) >> 9;
+ }
+ spin_unlock(&inode->i_lock);
- inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
+ inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
+ /* BB fill in uid and gid here? with help from winbind?
+ or retrieve from NTFS stream extended attribute */
#ifdef CONFIG_CIFS_EXPERIMENTAL
- /* fill in 0777 bits from ACL */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(inode, search_path, pfid);
- }
+ /* fill in 0777 bits from ACL */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ cFYI(1, ("Getting mode bits from ACL"));
+ acl_to_uid_mode(inode, full_path, pfid);
+ }
#endif
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- /* fill in remaining high mode bits e.g. SUID, VTX */
- get_sfu_mode(inode, search_path, cifs_sb, xid);
- } else if (atomic_read(&cifsInfo->inUse) == 0) {
- inode->i_uid = cifs_sb->mnt_uid;
- inode->i_gid = cifs_sb->mnt_gid;
- /* set so we do not keep refreshing these fields with
- bad data after user has changed them in memory */
- atomic_set(&cifsInfo->inUse, 1);
- }
-
- cifs_set_ops(inode, is_dfs_referral);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+ /* fill in remaining high mode bits e.g. SUID, VTX */
+ get_sfu_mode(inode, full_path, cifs_sb, xid);
+ } else if (atomic_read(&cifsInfo->inUse) == 0) {
+ inode->i_uid = cifs_sb->mnt_uid;
+ inode->i_gid = cifs_sb->mnt_gid;
+ /* set so we do not keep refreshing these fields with
+ bad data after user has changed them in memory */
+ atomic_set(&cifsInfo->inUse, 1);
}
+
+ cifs_set_ops(inode, is_dfs_referral);
+
+
+
+
cgii_exit:
- if (full_path != search_path)
- kfree(full_path);
kfree(buf);
return rc;
}
int oplock = 0;
rc = SMBLegacyOpen(xid, pTcon, full_path,
- FILE_OPEN,
- SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+ FILE_OPEN, GENERIC_WRITE,
CREATE_NOT_DIR, &netfid, &oplock,
NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
#define CIFS_IOC_CHECKUMOUNT _IO(0xCF, 2)
-int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg)
+long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
{
+ struct inode *inode = filep->f_dentry->d_inode;
int rc = -ENOTTY; /* strange error - but the precedent */
int xid;
struct cifs_sb_info *cifs_sb;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
char *full_path = NULL;
- char *tmp_path = NULL;
char *tmpbuffer;
int len;
__u16 fid;
cFYI(1, ("Error closing junction point "
"(open for ioctl)"));
}
- /* BB unwind this long, nested function, or remove BB */
- if (rc == -EIO) {
- /* Query if DFS Junction */
- unsigned int num_referrals = 0;
- struct dfs_info3_param *refs = NULL;
- tmp_path =
- kmalloc(MAX_TREE_SIZE + MAX_PATHCONF + 1,
- GFP_KERNEL);
- if (tmp_path) {
- strncpy(tmp_path, pTcon->treeName,
- MAX_TREE_SIZE);
- strncat(tmp_path, full_path,
- MAX_PATHCONF);
- rc = get_dfs_path(xid, pTcon->ses,
- tmp_path,
- cifs_sb->local_nls,
- &num_referrals, &refs,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- cFYI(1, ("Get DFS for %s rc = %d ",
- tmp_path, rc));
- if ((num_referrals == 0) && (rc == 0))
- rc = -EACCES;
- else {
- cFYI(1, ("num referral: %d",
- num_referrals));
- if (refs && refs->path_name) {
- strncpy(tmpbuffer,
- refs->path_name,
- len-1);
- }
- }
- kfree(refs);
- kfree(tmp_path);
-}
- /* BB add code like else decode referrals
- then memcpy to tmpbuffer and free referrals
- string array BB */
- }
+ /* If it is a DFS junction earlier we would have gotten
+ PATH_NOT_COVERED returned from server so we do
+ not need to request the DFS info here */
}
}
/* BB Anything else to do to handle recursive links? */
int ret = 0;
/* calculate length by finding first slash or NULL */
- if (address_family == AF_INET) {
+ if (address_family == AF_INET)
ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
- } else if (address_family == AF_INET6) {
+ else if (address_family == AF_INET6)
ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
- }
+
cFYI(DBG2, ("address conversion returned %d for %s", ret, cp));
if (ret > 0)
ret = 1;
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
(index_to_find < first_entry_in_buffer)) {
/* close and restart search */
cFYI(1, ("search backing up - close and restart search"));
- cifsFile->invalidHandle = true;
- CIFSFindClose(xid, pTcon, cifsFile->netfid);
+ if (!cifsFile->srch_inf.endOfSearch &&
+ !cifsFile->invalidHandle) {
+ cifsFile->invalidHandle = true;
+ CIFSFindClose(xid, pTcon, cifsFile->netfid);
+ }
kfree(cifsFile->search_resume_name);
cifsFile->search_resume_name = NULL;
if (cifsFile->srch_inf.ntwrk_buf_start) {
/* execve success */
security_bprm_free(bprm);
acct_update_integrals(current);
- kfree(bprm);
+ free_bprm(bprm);
return retval;
}
}
out_kfree:
- kfree(bprm);
+ free_bprm(bprm);
out_ret:
return retval;
#include <linux/pagemap.h>
#include <linux/idr.h>
#include <linux/file.h>
+#include <linux/mutex.h>
#include <linux/sctp.h>
#include <net/sctp/user.h>
static struct workqueue_struct *send_workqueue;
static DEFINE_IDR(connections_idr);
-static DECLARE_MUTEX(connections_lock);
+static DEFINE_MUTEX(connections_lock);
static int max_nodeid;
static struct kmem_cache *con_cache;
{
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
con = __nodeid2con(nodeid, allocation);
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return con;
}
int i;
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i=0; i<=max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (con && con->sctp_assoc == assoc_id) {
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return con;
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return NULL;
}
int i;
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i=1; i<=max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (!con)
}
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
}
/* Something happened to an association */
* errors we try again until the max number of retries is reached.
*/
if (result != -EHOSTUNREACH && result != -ENETUNREACH &&
- result != -ENETDOWN && result != EINVAL
+ result != -ENETDOWN && result != -EINVAL
&& result != -EPROTONOSUPPORT) {
lowcomms_connect_sock(con);
result = 0;
/* Set all the flags to prevent any
socket activity.
*/
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i = 0; i <= max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (con) {
con->sock->sk->sk_user_data = NULL;
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
work_stop();
- down(&connections_lock);
+ mutex_lock(&connections_lock);
clean_writequeues();
for (i = 0; i <= max_nodeid; i++) {
}
}
max_nodeid = 0;
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
kmem_cache_destroy(con_cache);
idr_init(&connections_idr);
}
return rv;
}
-void __exit dlm_netlink_exit(void)
+void dlm_netlink_exit(void)
{
genl_unregister_ops(&family, &dlm_nl_ops);
genl_unregister_family(&family);
struct plock_xop *xop;
xop = (struct plock_xop *)op;
if (xop->callback)
- count = dlm_plock_callback(op);
+ dlm_plock_callback(op);
else
wake_up(&recv_wq);
} else
goto out;
}
}
- mutex_unlock(&key_tfm_list_mutex);
(*tfm) = key_tfm->key_tfm;
(*tfm_mutex) = &key_tfm->key_tfm_mutex;
out:
+ mutex_unlock(&key_tfm_list_mutex);
return rc;
}
int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key,
struct ecryptfs_auth_tok **auth_tok,
char *sig);
-int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start,
- int num_zeros);
int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
loff_t offset, size_t size);
int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode,
struct ecryptfs_daemon *daemon;
struct ecryptfs_msg_ctx *msg_ctx;
size_t packet_length_size;
- u32 counter_nbo;
char packet_length[3];
size_t i;
size_t total_length;
"pending message\n", __func__, count, total_length);
goto out_unlock_msg_ctx;
}
- i = 0;
- buf[i++] = msg_ctx->type;
- counter_nbo = cpu_to_be32(msg_ctx->counter);
- memcpy(&buf[i], (char *)&counter_nbo, 4);
- i += 4;
+ rc = -EFAULT;
+ if (put_user(msg_ctx->type, buf))
+ goto out_unlock_msg_ctx;
+ if (put_user(cpu_to_be32(msg_ctx->counter), (__be32 __user *)(buf + 1)))
+ goto out_unlock_msg_ctx;
+ i = 5;
if (msg_ctx->msg) {
- memcpy(&buf[i], packet_length, packet_length_size);
+ if (copy_to_user(&buf[i], packet_length, packet_length_size))
+ goto out_unlock_msg_ctx;
i += packet_length_size;
- rc = copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size);
- if (rc) {
- printk(KERN_ERR "%s: copy_to_user returned error "
- "[%d]\n", __func__, rc);
+ if (copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size))
goto out_unlock_msg_ctx;
- }
i += msg_ctx->msg_size;
}
rc = i;
ecryptfs_miscdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- u32 counter_nbo, seq;
+ __be32 counter_nbo;
+ u32 seq;
size_t packet_size, packet_size_length, i;
ssize_t sz = 0;
char *data;
count);
goto out_free;
}
- memcpy((char *)&counter_nbo, &data[i], 4);
+ memcpy(&counter_nbo, &data[i], 4);
seq = be32_to_cpu(counter_nbo);
i += 4;
rc = ecryptfs_parse_packet_length(&data[i], &packet_size,
ecryptfs_page_idx, rc);
goto out;
}
- if (start_offset_in_page) {
- /* Read in the page from the lower
- * into the eCryptfs inode page cache,
- * decrypting */
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n",
- __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
/*
ecryptfs_page_idx, rc);
goto out;
}
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n", __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
memcpy((data + data_offset),
((char *)ecryptfs_page_virt + start_offset_in_page),
no_thread_group:
exit_itimers(sig);
+ flush_itimer_signals();
if (leader)
release_task(leader);
EXPORT_SYMBOL(search_binary_handler);
+void free_bprm(struct linux_binprm *bprm)
+{
+ free_arg_pages(bprm);
+ kfree(bprm);
+}
+
/*
* sys_execve() executes a new program.
*/
retval = search_binary_handler(bprm,regs);
if (retval >= 0) {
/* execve success */
- free_arg_pages(bprm);
security_bprm_free(bprm);
acct_update_integrals(current);
- kfree(bprm);
+ free_bprm(bprm);
if (displaced)
put_files_struct(displaced);
return retval;
}
out:
- free_arg_pages(bprm);
if (bprm->security)
security_bprm_free(bprm);
fput(bprm->file);
}
out_kfree:
- kfree(bprm);
+ free_bprm(bprm);
out_files:
if (displaced)
}
blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count %
+ EXT3_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
}
+static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block,
+ ext4_group_t block_group)
+{
+ ext4_group_t actual_group;
+ ext4_get_group_no_and_offset(sb, block, &actual_group, 0);
+ if (actual_group == block_group)
+ return 1;
+ return 0;
+}
+
+static int ext4_group_used_meta_blocks(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ ext4_fsblk_t tmp;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ /* block bitmap, inode bitmap, and inode table blocks */
+ int used_blocks = sbi->s_itb_per_group + 2;
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ struct ext4_group_desc *gdp;
+ struct buffer_head *bh;
+
+ gdp = ext4_get_group_desc(sb, block_group, &bh);
+ if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!ext4_block_in_group(sb, tmp, block_group))
+ used_blocks -= 1;
+ }
+ }
+ return used_blocks;
+}
/* Initializes an uninitialized block bitmap if given, and returns the
* number of blocks free in the group. */
unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
free_blocks = group_blocks - bit_max;
if (bh) {
- ext4_fsblk_t start;
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
for (bit = 0; bit < bit_max; bit++)
ext4_set_bit(bit, bh->b_data);
start = ext4_group_first_block_no(sb, block_group);
- /* Set bits for block and inode bitmaps, and inode table */
- ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data);
- ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data);
- for (bit = (ext4_inode_table(sb, gdp) - start),
- bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb,
+ EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg ||
+ ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+ }
/*
* Also if the number of blocks within the group is
* less than the blocksize * 8 ( which is the size
*/
mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data);
}
-
- return free_blocks - sbi->s_itb_per_group - 2;
+ return free_blocks - ext4_group_used_meta_blocks(sb, block_group);
}
sbi = EXT4_SB(sb);
es = sbi->s_es;
- ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
- gdp->bg_free_blocks_count);
err = -EIO;
bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group);
if (!gdp)
goto out_err;
+ ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
+ gdp->bg_free_blocks_count);
+
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
goto out_err;
static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
- unsigned len = ac->ac_o_ex.fe_len;
-
+ unsigned int len = ac->ac_o_ex.fe_len;
ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
&ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
}
blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count %
+ EXT4_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ journal_t *journal = sbi->s_journal;
struct ext4_super_block *es = sbi->s_es;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
seq_printf(seq, ",commit=%u",
(unsigned) (sbi->s_commit_interval / HZ));
}
- if (test_opt(sb, BARRIER))
- seq_puts(seq, ",barrier=1");
+ /*
+ * We're changing the default of barrier mount option, so
+ * let's always display its mount state so it's clear what its
+ * status is.
+ */
+ seq_puts(seq, ",barrier=");
+ seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
+ seq_puts(seq, ",journal_async_commit");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (!test_opt(sb, EXTENTS))
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
set_opt(sbi->s_mount_opt, RESERVATION);
+ set_opt(sbi->s_mount_opt, BARRIER);
/*
* turn on extents feature by default in ext4 filesystem
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
+ if (!(sb->s_flags & MS_RDONLY) &&
+ EXT4_SB(sb)->s_journal->j_failed_commit) {
+ printk(KERN_CRIT "EXT4-fs error (device %s): "
+ "ext4_fill_super: Journal transaction "
+ "%u is corrupt\n", sb->s_id,
+ EXT4_SB(sb)->s_journal->j_failed_commit);
+ if (test_opt (sb, ERRORS_RO)) {
+ printk (KERN_CRIT
+ "Mounting filesystem read-only\n");
+ sb->s_flags |= MS_RDONLY;
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ }
+ if (test_opt(sb, ERRORS_PANIC)) {
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ ext4_commit_super(sb, es, 1);
+ printk(KERN_CRIT
+ "EXT4-fs (device %s): mount failed\n",
+ sb->s_id);
+ goto failed_mount4;
+ }
+ }
} else if (journal_inum) {
if (ext4_create_journal(sb, es, journal_inum))
goto failed_mount3;
};
int sysctl_nr_open __read_mostly = 1024*1024;
+int sysctl_nr_open_min = BITS_PER_LONG;
+int sysctl_nr_open_max = 1024 * 1024; /* raised later */
/*
* We use this list to defer free fdtables that have vmalloced
unsigned int cpy, set;
BUG_ON(nfdt->max_fds < ofdt->max_fds);
- if (ofdt->max_fds == 0)
- return;
cpy = ofdt->max_fds * sizeof(struct file *);
set = (nfdt->max_fds - ofdt->max_fds) * sizeof(struct file *);
return expand_fdtable(files, nr);
}
+static int count_open_files(struct fdtable *fdt)
+{
+ int size = fdt->max_fds;
+ int i;
+
+ /* Find the last open fd */
+ for (i = size/(8*sizeof(long)); i > 0; ) {
+ if (fdt->open_fds->fds_bits[--i])
+ break;
+ }
+ i = (i+1) * 8 * sizeof(long);
+ return i;
+}
+
+/*
+ * Allocate a new files structure and copy contents from the
+ * passed in files structure.
+ * errorp will be valid only when the returned files_struct is NULL.
+ */
+struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
+{
+ struct files_struct *newf;
+ struct file **old_fds, **new_fds;
+ int open_files, size, i;
+ struct fdtable *old_fdt, *new_fdt;
+
+ *errorp = -ENOMEM;
+ newf = kmem_cache_alloc(files_cachep, GFP_KERNEL);
+ if (!newf)
+ goto out;
+
+ atomic_set(&newf->count, 1);
+
+ spin_lock_init(&newf->file_lock);
+ newf->next_fd = 0;
+ new_fdt = &newf->fdtab;
+ new_fdt->max_fds = NR_OPEN_DEFAULT;
+ new_fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
+ new_fdt->open_fds = (fd_set *)&newf->open_fds_init;
+ new_fdt->fd = &newf->fd_array[0];
+ INIT_RCU_HEAD(&new_fdt->rcu);
+ new_fdt->next = NULL;
+
+ spin_lock(&oldf->file_lock);
+ old_fdt = files_fdtable(oldf);
+ open_files = count_open_files(old_fdt);
+
+ /*
+ * Check whether we need to allocate a larger fd array and fd set.
+ */
+ while (unlikely(open_files > new_fdt->max_fds)) {
+ spin_unlock(&oldf->file_lock);
+
+ if (new_fdt != &newf->fdtab) {
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
+ }
+
+ new_fdt = alloc_fdtable(open_files - 1);
+ if (!new_fdt) {
+ *errorp = -ENOMEM;
+ goto out_release;
+ }
+
+ /* beyond sysctl_nr_open; nothing to do */
+ if (unlikely(new_fdt->max_fds < open_files)) {
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
+ *errorp = -EMFILE;
+ goto out_release;
+ }
+
+ /*
+ * Reacquire the oldf lock and a pointer to its fd table
+ * who knows it may have a new bigger fd table. We need
+ * the latest pointer.
+ */
+ spin_lock(&oldf->file_lock);
+ old_fdt = files_fdtable(oldf);
+ open_files = count_open_files(old_fdt);
+ }
+
+ old_fds = old_fdt->fd;
+ new_fds = new_fdt->fd;
+
+ memcpy(new_fdt->open_fds->fds_bits,
+ old_fdt->open_fds->fds_bits, open_files/8);
+ memcpy(new_fdt->close_on_exec->fds_bits,
+ old_fdt->close_on_exec->fds_bits, open_files/8);
+
+ for (i = open_files; i != 0; i--) {
+ struct file *f = *old_fds++;
+ if (f) {
+ get_file(f);
+ } else {
+ /*
+ * The fd may be claimed in the fd bitmap but not yet
+ * instantiated in the files array if a sibling thread
+ * is partway through open(). So make sure that this
+ * fd is available to the new process.
+ */
+ FD_CLR(open_files - i, new_fdt->open_fds);
+ }
+ rcu_assign_pointer(*new_fds++, f);
+ }
+ spin_unlock(&oldf->file_lock);
+
+ /* compute the remainder to be cleared */
+ size = (new_fdt->max_fds - open_files) * sizeof(struct file *);
+
+ /* This is long word aligned thus could use a optimized version */
+ memset(new_fds, 0, size);
+
+ if (new_fdt->max_fds > open_files) {
+ int left = (new_fdt->max_fds-open_files)/8;
+ int start = open_files / (8 * sizeof(unsigned long));
+
+ memset(&new_fdt->open_fds->fds_bits[start], 0, left);
+ memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
+ }
+
+ rcu_assign_pointer(newf->fdt, new_fdt);
+
+ return newf;
+
+out_release:
+ kmem_cache_free(files_cachep, newf);
+out:
+ return NULL;
+}
+
static void __devinit fdtable_defer_list_init(int cpu)
{
struct fdtable_defer *fddef = &per_cpu(fdtable_defer_list, cpu);
int i;
for_each_possible_cpu(i)
fdtable_defer_list_init(i);
+ sysctl_nr_open_max = min((size_t)INT_MAX, ~(size_t)0/sizeof(void *)) &
+ -BITS_PER_LONG;
}
+
+struct files_struct init_files = {
+ .count = ATOMIC_INIT(1),
+ .fdt = &init_files.fdtab,
+ .fdtab = {
+ .max_fds = NR_OPEN_DEFAULT,
+ .fd = &init_files.fd_array[0],
+ .close_on_exec = (fd_set *)&init_files.close_on_exec_init,
+ .open_fds = (fd_set *)&init_files.open_fds_init,
+ .rcu = RCU_HEAD_INIT,
+ },
+ .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock),
+};
err = bdi_init(&fc->bdi);
if (err)
goto error_kfree;
- err = bdi_register_dev(&fc->bdi, fc->dev);
+ if (sb->s_bdev) {
+ err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+ MAJOR(fc->dev), MINOR(fc->dev));
+ } else {
+ err = bdi_register_dev(&fc->bdi, fc->dev);
+ }
if (err)
goto error_bdi_destroy;
/*
struct gfs2_inode *ip = gl->gl_object;
int error = 0;
- if (!ip)
+ if (!ip || (gh->gh_flags & GL_SKIP))
return 0;
if (test_bit(GIF_INVALID, &ip->i_flags)) {
GIF_INVALID = 0,
GIF_QD_LOCKED = 1,
GIF_SW_PAGED = 3,
+ GIF_USER = 4, /* user inode, not metadata addr space */
};
struct gfs2_dinode_host {
struct gfs2_inode *ip = GFS2_I(inode);
u64 *no_addr = opaque;
- if (ip->i_no_addr == *no_addr &&
- inode->i_private != NULL)
+ if (ip->i_no_addr == *no_addr && test_bit(GIF_USER, &ip->i_flags))
return 1;
return 0;
inode->i_ino = (unsigned long)*no_addr;
ip->i_no_addr = *no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_skip_data *data = opaque;
- if (ip->i_no_addr == data->no_addr && inode->i_private != NULL){
+ if (ip->i_no_addr == data->no_addr && test_bit(GIF_USER, &ip->i_flags)){
if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)){
data->skipped = 1;
return 0;
return 1;
inode->i_ino = (unsigned long)(data->no_addr);
ip->i_no_addr = data->no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
* Returns: A VFS inode, or an error
*/
-struct inode *gfs2_inode_lookup(struct super_block *sb,
+struct inode *gfs2_inode_lookup(struct super_block *sb,
unsigned int type,
u64 no_addr,
u64 no_formal_ino, int skip_freeing)
if (inode->i_state & I_NEW) {
struct gfs2_sbd *sdp = GFS2_SB(inode);
- inode->i_private = ip;
ip->i_no_formal_ino = no_formal_ino;
error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
struct inode *gfs2_aspace_get(struct gfs2_sbd *sdp)
{
struct inode *aspace;
+ struct gfs2_inode *ip;
aspace = new_inode(sdp->sd_vfs);
if (aspace) {
mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS);
aspace->i_mapping->a_ops = &aspace_aops;
aspace->i_size = ~0ULL;
- aspace->i_private = NULL;
+ ip = GFS2_I(aspace);
+ clear_bit(GIF_USER, &ip->i_flags);
insert_inode_hash(aspace);
}
return aspace;
if (!table[0])
table = sdp->sd_vfs->s_id;
- snprintf(sdp->sd_proto_name, GFS2_FSNAME_LEN, "%s", proto);
- snprintf(sdp->sd_table_name, GFS2_FSNAME_LEN, "%s", table);
+ strlcpy(sdp->sd_proto_name, proto, GFS2_FSNAME_LEN);
+ strlcpy(sdp->sd_table_name, table, GFS2_FSNAME_LEN);
table = sdp->sd_table_name;
while ((table = strchr(table, '/')))
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
struct gfs2_inode *ip = GFS2_I(inode);
/* Check this is a "normal" inode */
- if (inode->i_private) {
+ if (test_bit(GIF_USER, &ip->i_flags)) {
if (current->flags & PF_MEMALLOC)
return 0;
if (sync)
*/
static void gfs2_drop_inode(struct inode *inode)
{
- if (inode->i_private && inode->i_nlink) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+
+ if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
static void gfs2_clear_inode(struct inode *inode)
{
+ struct gfs2_inode *ip = GFS2_I(inode);
+
/* This tells us its a "real" inode and not one which only
* serves to contain an address space (see rgrp.c, meta_io.c)
* which therefore doesn't have its own glocks.
*/
- if (inode->i_private) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ if (test_bit(GIF_USER, &ip->i_flags)) {
ip->i_gl->gl_object = NULL;
gfs2_glock_schedule_for_reclaim(ip->i_gl);
gfs2_glock_put(ip->i_gl);
struct gfs2_holder gh;
int error;
- if (!inode->i_private)
+ if (!test_bit(GIF_USER, &ip->i_flags))
goto out;
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
al->al_alloced += *n;
- gfs2_statfs_change(sdp, 0, -*n, 0);
+ gfs2_statfs_change(sdp, 0, -(s64)*n, 0);
gfs2_quota_change(ip, *n, ip->i_inode.i_uid, ip->i_inode.i_gid);
spin_lock(&sdp->sd_rindex_spin);
# Licensed under the GPL
#
-hppfs-objs := hppfs.o
-
-obj-y =
-obj-$(CONFIG_HPPFS) += $(hppfs-objs)
+obj-$(CONFIG_HPPFS) += hppfs.o
spin_unlock(&journal->j_state_lock);
/* And try again, without the barrier */
+ lock_buffer(bh);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
ret = submit_bh(WRITE, bh);
*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
obh->b_size);
}
+ put_bh(obh);
}
return 0;
}
chksum_err = chksum_seen = 0;
if (info->end_transaction) {
- printk(KERN_ERR "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID - 1);
+ journal->j_failed_commit =
+ info->end_transaction;
brelse(bh);
break;
}
if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
- printk(KERN_ERR
- "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID);
+ journal->j_failed_commit =
+ next_commit_ID;
brelse(bh);
break;
}
return count;
}
+ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available)
+{
+ loff_t pos = *ppos;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= available)
+ return 0;
+ if (count > available - pos)
+ count = available - pos;
+ memcpy(to, from + pos, count);
+ *ppos = pos + count;
+
+ return count;
+}
+
/*
* Transaction based IO.
* The file expects a single write which triggers the transaction, and then
EXPORT_SYMBOL(simple_sync_file);
EXPORT_SYMBOL(simple_unlink);
EXPORT_SYMBOL(simple_read_from_buffer);
+EXPORT_SYMBOL(memory_read_from_buffer);
EXPORT_SYMBOL(simple_transaction_get);
EXPORT_SYMBOL(simple_transaction_read);
EXPORT_SYMBOL(simple_transaction_release);
if (IS_ERR(dentry))
goto fail;
+ if (dentry->d_inode)
+ goto eexist;
/*
* Special case - lookup gave negative, but... we had foo/bar/
* From the vfs_mknod() POV we just have a negative dentry -
* all is fine. Let's be bastards - you had / on the end, you've
* been asking for (non-existent) directory. -ENOENT for you.
*/
- if (!is_dir && nd->last.name[nd->last.len] && !dentry->d_inode)
- goto enoent;
+ if (unlikely(!is_dir && nd->last.name[nd->last.len])) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOENT);
+ }
return dentry;
-enoent:
+eexist:
dput(dentry);
- dentry = ERR_PTR(-ENOENT);
+ dentry = ERR_PTR(-EEXIST);
fail:
return dentry;
}
if (clp == NULL)
return SVC_DROP;
- dprintk("%s: %s NFSv4 callback!\n", __FUNCTION__,
+ dprintk("%s: %s NFSv4 callback!\n", __func__,
svc_print_addr(rqstp, buf, sizeof(buf)));
nfs_put_client(clp);
out_putclient:
nfs_put_client(clp);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(res->status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(res->status));
return res->status;
}
nfs_put_client(prev);
} while (clp != NULL);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(res));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(res));
return res;
}
/* We do not like overly long tags! */
if (hdr->taglen > CB_OP_TAGLEN_MAXSZ - 12) {
printk("NFSv4 CALLBACK %s: client sent tag of length %u\n",
- __FUNCTION__, hdr->taglen);
+ __func__, hdr->taglen);
return htonl(NFS4ERR_RESOURCE);
}
p = read_buf(xdr, 12);
/* Check minor version is zero. */
if (minor_version != 0) {
printk(KERN_WARNING "%s: NFSv4 server callback with illegal minor version %u!\n",
- __FUNCTION__, minor_version);
+ __func__, minor_version);
return htonl(NFS4ERR_MINOR_VERS_MISMATCH);
}
hdr->callback_ident = ntohl(*p++);
args->addr = svc_addr(rqstp);
status = decode_bitmap(xdr, args->bitmap);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
args->truncate = ntohl(*p);
status = decode_fh(xdr, &args->fh);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
status = encode_attr_mtime(xdr, res->bitmap, &res->mtime);
*savep = htonl((unsigned int)((char *)xdr->p - (char *)(savep+1)));
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
long maxlen;
__be32 res;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
status = decode_op_hdr(xdr_in, &op_nr);
if (likely(status == 0)) {
switch (op_nr) {
status = res;
if (op->encode_res != NULL && status == 0)
status = op->encode_res(rqstp, xdr_out, resp);
- dprintk("%s: done, status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: done, status = %d\n", __func__, ntohl(status));
return status;
}
*/
static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *resp)
{
- struct cb_compound_hdr_arg hdr_arg;
- struct cb_compound_hdr_res hdr_res;
+ struct cb_compound_hdr_arg hdr_arg = { 0 };
+ struct cb_compound_hdr_res hdr_res = { NULL };
struct xdr_stream xdr_in, xdr_out;
__be32 *p;
__be32 status;
- unsigned int nops = 1;
+ unsigned int nops = 0;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
xdr_init_decode(&xdr_in, &rqstp->rq_arg, rqstp->rq_arg.head[0].iov_base);
p = (__be32*)((char *)rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len);
xdr_init_encode(&xdr_out, &rqstp->rq_res, p);
- decode_compound_hdr_arg(&xdr_in, &hdr_arg);
+ status = decode_compound_hdr_arg(&xdr_in, &hdr_arg);
+ if (status == __constant_htonl(NFS4ERR_RESOURCE))
+ return rpc_garbage_args;
+
hdr_res.taglen = hdr_arg.taglen;
hdr_res.tag = hdr_arg.tag;
- hdr_res.nops = NULL;
- encode_compound_hdr_res(&xdr_out, &hdr_res);
+ if (encode_compound_hdr_res(&xdr_out, &hdr_res) != 0)
+ return rpc_system_err;
- for (;;) {
+ while (status == 0 && nops != hdr_arg.nops) {
status = process_op(rqstp, &xdr_in, argp, &xdr_out, resp);
- if (status != 0)
- break;
- if (nops == hdr_arg.nops)
- break;
nops++;
}
+
*hdr_res.status = status;
*hdr_res.nops = htonl(nops);
- dprintk("%s: done, status = %u\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: done, status = %u\n", __func__, ntohl(status));
return rpc_success;
}
clnt = rpc_create(&args);
if (IS_ERR(clnt)) {
dprintk("%s: cannot create RPC client. Error = %ld\n",
- __FUNCTION__, PTR_ERR(clnt));
+ __func__, PTR_ERR(clnt));
return PTR_ERR(clnt);
}
server->client = rpc_clone_client(clp->cl_rpcclient);
if (IS_ERR(server->client)) {
- dprintk("%s: couldn't create rpc_client!\n", __FUNCTION__);
+ dprintk("%s: couldn't create rpc_client!\n", __func__);
return PTR_ERR(server->client);
}
auth = rpcauth_create(pseudoflavour, server->client);
if (IS_ERR(auth)) {
- dprintk("%s: couldn't create credcache!\n", __FUNCTION__);
+ dprintk("%s: couldn't create credcache!\n", __func__);
return PTR_ERR(auth);
}
}
error = nfs_idmap_new(clp);
if (error < 0) {
dprintk("%s: failed to create idmapper. Error = %d\n",
- __FUNCTION__, error);
+ __func__, error);
goto error;
}
__set_bit(NFS_CS_IDMAP, &clp->cl_res_state);
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d.\n",
- __FUNCTION__, status);
+ __func__, status);
case -NFS4ERR_EXPIRED:
/* kill_proc(fl->fl_pid, SIGLOST, 1); */
case -NFS4ERR_STALE_CLIENTID:
*/
dfprintk(FILE, "%s: server %s handed out "
"a duplicate delegation!\n",
- __FUNCTION__, clp->cl_hostname);
+ __func__, clp->cl_hostname);
if (delegation->type <= nfsi->delegation->type) {
freeme = delegation;
delegation = NULL;
int error;
dfprintk(DIRCACHE, "NFS: %s: reading cookie %Lu into page %lu\n",
- __FUNCTION__, (long long)desc->entry->cookie,
+ __func__, (long long)desc->entry->cookie,
page->index);
again:
while((status = dir_decode(desc)) == 0) {
dfprintk(DIRCACHE, "NFS: %s: examining cookie %Lu\n",
- __FUNCTION__, (unsigned long long)entry->cookie);
+ __func__, (unsigned long long)entry->cookie);
if (entry->prev_cookie == *desc->dir_cookie)
break;
if (loop_count++ > 200) {
int status;
dfprintk(DIRCACHE, "NFS: %s: searching page %ld for target %Lu\n",
- __FUNCTION__, desc->page_index,
+ __func__, desc->page_index,
(long long) *desc->dir_cookie);
/* If we find the page in the page_cache, we cannot be sure
if (status < 0)
dir_page_release(desc);
out:
- dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __FUNCTION__, status);
+ dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __func__, status);
return status;
}
}
}
- dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __FUNCTION__, res);
+ dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __func__, res);
return res;
}
desc->entry->eof = 0;
out:
dfprintk(DIRCACHE, "NFS: %s: returns %d\n",
- __FUNCTION__, status);
+ __func__, status);
return status;
out_release:
dir_page_release(desc);
if (is_bad_inode(inode)) {
dfprintk(LOOKUPCACHE, "%s: %s/%s has dud inode\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
goto out_bad;
}
unlock_kernel();
dput(parent);
dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is valid\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
return 1;
out_zap_parent:
unlock_kernel();
dput(parent);
dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is invalid\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
return 0;
}
if (res < 0)
dprintk(KERN_WARNING "%s: VFS is out of sync with lock manager"
" - error %d!\n",
- __FUNCTION__, res);
+ __func__, res);
return res;
}
}
if (ctx->cred != NULL)
put_rpccred(ctx->cred);
- dput(ctx->path.dentry);
- mntput(ctx->path.mnt);
+ path_put(&ctx->path);
kfree(ctx);
}
if (nfs_have_delegation(inode, FMODE_READ))
return 0;
+ /*
+ * Special case: if the attribute timeout is set to 0, then always
+ * treat the cache as having expired (unless holding
+ * a delegation).
+ */
+ if (nfsi->attrtimeo == 0)
+ return 1;
return !time_in_range(jiffies, nfsi->read_cache_jiffies, nfsi->read_cache_jiffies + nfsi->attrtimeo);
}
unsigned long now = jiffies;
dfprintk(VFS, "NFS: %s(%s/%ld ct=%d info=0x%x)\n",
- __FUNCTION__, inode->i_sb->s_id, inode->i_ino,
+ __func__, inode->i_sb->s_id, inode->i_ino,
atomic_read(&inode->i_count), fattr->valid);
if (nfsi->fileid != fattr->fileid)
* Big trouble! The inode has become a different object.
*/
printk(KERN_DEBUG "%s: inode %ld mode changed, %07o to %07o\n",
- __FUNCTION__, inode->i_ino, inode->i_mode, fattr->mode);
+ __func__, inode->i_ino, inode->i_mode, fattr->mode);
out_err:
/*
* No need to worry about unhashing the dentry, as the
dprintk("--> nfs_follow_mountpoint()\n");
BUG_ON(IS_ROOT(dentry));
- dprintk("%s: enter\n", __FUNCTION__);
+ dprintk("%s: enter\n", __func__);
dput(nd->path.dentry);
nd->path.dentry = dget(dentry);
goto out_follow;
goto out_err;
}
- mntput(nd->path.mnt);
- dput(nd->path.dentry);
+ path_put(&nd->path);
nd->path.mnt = mnt;
nd->path.dentry = dget(mnt->mnt_root);
schedule_delayed_work(&nfs_automount_task, nfs_mountpoint_expiry_timeout);
out:
- dprintk("%s: done, returned %d\n", __FUNCTION__, err);
+ dprintk("%s: done, returned %d\n", __func__, err);
dprintk("<-- nfs_follow_mountpoint() = %d\n", err);
return ERR_PTR(err);
dprintk("--> nfs_do_submount()\n");
- dprintk("%s: submounting on %s/%s\n", __FUNCTION__,
+ dprintk("%s: submounting on %s/%s\n", __func__,
dentry->d_parent->d_name.name,
dentry->d_name.name);
if (page == NULL)
free_page:
free_page((unsigned long)page);
out:
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
dprintk("<-- nfs_do_submount() = %p\n", mnt);
return mnt;
};
int status;
- dprintk("%s: call fsinfo\n", __FUNCTION__);
+ dprintk("%s: call fsinfo\n", __func__);
nfs_fattr_init(info->fattr);
status = rpc_call_sync(client, &msg, 0);
- dprintk("%s: reply fsinfo: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply fsinfo: %d\n", __func__, status);
if (!(info->fattr->valid & NFS_ATTR_FATTR)) {
msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
msg.rpc_resp = info->fattr;
status = rpc_call_sync(client, &msg, 0);
- dprintk("%s: reply getattr: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply getattr: %d\n", __func__, status);
}
return status;
}
extern struct nfs4_state_owner * nfs4_get_state_owner(struct nfs_server *, struct rpc_cred *);
extern void nfs4_put_state_owner(struct nfs4_state_owner *);
-extern void nfs4_drop_state_owner(struct nfs4_state_owner *);
extern struct nfs4_state * nfs4_get_open_state(struct inode *, struct nfs4_state_owner *);
extern void nfs4_put_open_state(struct nfs4_state *);
extern void nfs4_close_state(struct path *, struct nfs4_state *, mode_t);
if (strncmp(path, fs_path, strlen(fs_path)) != 0) {
dprintk("%s: path %s does not begin with fsroot %s\n",
- __FUNCTION__, path, fs_path);
+ __func__, path, fs_path);
return -ENOENT;
}
if (locations == NULL || locations->nlocations <= 0)
goto out;
- dprintk("%s: referral at %s/%s\n", __FUNCTION__,
+ dprintk("%s: referral at %s/%s\n", __func__,
dentry->d_parent->d_name.name, dentry->d_name.name);
page = (char *) __get_free_page(GFP_USER);
out:
free_page((unsigned long) page);
free_page((unsigned long) page2);
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
return mnt;
}
int err;
/* BUG_ON(IS_ROOT(dentry)); */
- dprintk("%s: enter\n", __FUNCTION__);
+ dprintk("%s: enter\n", __func__);
page = alloc_page(GFP_KERNEL);
if (page == NULL)
parent = dget_parent(dentry);
dprintk("%s: getting locations for %s/%s\n",
- __FUNCTION__, parent->d_name.name, dentry->d_name.name);
+ __func__, parent->d_name.name, dentry->d_name.name);
err = nfs4_proc_fs_locations(parent->d_inode, &dentry->d_name, fs_locations, page);
dput(parent);
__free_page(page);
kfree(fs_locations);
out:
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
return mnt;
}
{
if (err < -1000) {
dprintk("%s could not handle NFSv4 error %d\n",
- __FUNCTION__, -err);
+ __func__, -err);
return -EIO;
}
return err;
nfs4_put_open_state(p->state);
nfs4_put_state_owner(p->owner);
dput(p->dir);
- dput(p->path.dentry);
- mntput(p->path.mnt);
+ path_put(&p->path);
kfree(p);
}
nfs4_put_open_state(calldata->state);
nfs_free_seqid(calldata->arg.seqid);
nfs4_put_state_owner(sp);
- dput(calldata->path.dentry);
- mntput(calldata->path.mnt);
+ path_put(&calldata->path);
kfree(calldata);
}
goto out;
/* Make sure server returned a different fsid for the referral */
if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) {
- dprintk("%s: server did not return a different fsid for a referral at %s\n", __FUNCTION__, name->name);
+ dprintk("%s: server did not return a different fsid for a referral at %s\n", __func__, name->name);
status = -EIO;
goto out;
}
};
int status;
- dprintk("%s: dentry = %s/%s, cookie = %Lu\n", __FUNCTION__,
+ dprintk("%s: dentry = %s/%s, cookie = %Lu\n", __func__,
dentry->d_parent->d_name.name,
dentry->d_name.name,
(unsigned long long)cookie);
nfs_invalidate_atime(dir);
- dprintk("%s: returns %d\n", __FUNCTION__, status);
+ dprintk("%s: returns %d\n", __func__, status);
return status;
}
struct nfs4_lockdata *data = calldata;
struct nfs4_state *state = data->lsp->ls_state;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
if (nfs_wait_on_sequence(data->arg.lock_seqid, task) != 0)
return;
/* Do we need to do an open_to_lock_owner? */
data->arg.new_lock_owner = 0;
data->timestamp = jiffies;
rpc_call_start(task);
- dprintk("%s: done!, ret = %d\n", __FUNCTION__, data->rpc_status);
+ dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
}
static void nfs4_lock_done(struct rpc_task *task, void *calldata)
{
struct nfs4_lockdata *data = calldata;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
data->rpc_status = task->tk_status;
if (RPC_ASSASSINATED(task))
renew_lease(NFS_SERVER(data->ctx->path.dentry->d_inode), data->timestamp);
}
out:
- dprintk("%s: done, ret = %d!\n", __FUNCTION__, data->rpc_status);
+ dprintk("%s: done, ret = %d!\n", __func__, data->rpc_status);
}
static void nfs4_lock_release(void *calldata)
{
struct nfs4_lockdata *data = calldata;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
nfs_free_seqid(data->arg.open_seqid);
if (data->cancelled != 0) {
struct rpc_task *task;
data->arg.lock_seqid);
if (!IS_ERR(task))
rpc_put_task(task);
- dprintk("%s: cancelling lock!\n", __FUNCTION__);
+ dprintk("%s: cancelling lock!\n", __func__);
} else
nfs_free_seqid(data->arg.lock_seqid);
nfs4_put_lock_state(data->lsp);
put_nfs_open_context(data->ctx);
kfree(data);
- dprintk("%s: done!\n", __FUNCTION__);
+ dprintk("%s: done!\n", __func__);
}
static const struct rpc_call_ops nfs4_lock_ops = {
};
int ret;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
data = nfs4_alloc_lockdata(fl, nfs_file_open_context(fl->fl_file),
fl->fl_u.nfs4_fl.owner);
if (data == NULL)
} else
data->cancelled = 1;
rpc_put_task(task);
- dprintk("%s: done, ret = %d!\n", __FUNCTION__, ret);
+ dprintk("%s: done, ret = %d!\n", __func__, ret);
return ret;
}
/* Note: we always want to sleep here! */
request->fl_flags = fl_flags | FL_SLEEP;
if (do_vfs_lock(request->fl_file, request) < 0)
- printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __func__);
out_unlock:
up_read(&clp->cl_sem);
out:
};
int status;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
nfs_fattr_init(&fs_locations->fattr);
fs_locations->server = server;
fs_locations->nlocations = 0;
status = rpc_call_sync(server->client, &msg, 0);
- dprintk("%s: returned status = %d\n", __FUNCTION__, status);
+ dprintk("%s: returned status = %d\n", __func__, status);
return status;
}
unsigned long last, now;
down_read(&clp->cl_sem);
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
/* Are there any active superblocks? */
if (list_empty(&clp->cl_superblocks))
goto out;
spin_lock(&clp->cl_lock);
} else
dprintk("%s: failed to call renewd. Reason: lease not expired \n",
- __FUNCTION__);
+ __func__);
if (timeout < 5 * HZ) /* safeguard */
timeout = 5 * HZ;
dprintk("%s: requeueing work. Lease period = %ld\n",
- __FUNCTION__, (timeout + HZ - 1) / HZ);
+ __func__, (timeout + HZ - 1) / HZ);
cancel_delayed_work(&clp->cl_renewd);
schedule_delayed_work(&clp->cl_renewd, timeout);
spin_unlock(&clp->cl_lock);
out:
up_read(&clp->cl_sem);
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
}
/* Must be called with clp->cl_sem locked for writes */
if (timeout < 5 * HZ)
timeout = 5 * HZ;
dprintk("%s: requeueing work. Lease period = %ld\n",
- __FUNCTION__, (timeout + HZ - 1) / HZ);
+ __func__, (timeout + HZ - 1) / HZ);
cancel_delayed_work(&clp->cl_renewd);
schedule_delayed_work(&clp->cl_renewd, timeout);
set_bit(NFS_CS_RENEWD, &clp->cl_res_state);
return sp;
}
-void
+static void
nfs4_drop_state_owner(struct nfs4_state_owner *sp)
{
if (!RB_EMPTY_NODE(&sp->so_client_node)) {
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
- __FUNCTION__, status);
+ __func__, status);
case -NFS4ERR_EXPIRED:
case -NFS4ERR_NO_GRACE:
case -NFS4ERR_RECLAIM_BAD:
list_for_each_entry(lock, &state->lock_states, ls_locks) {
if (!(lock->ls_flags & NFS_LOCK_INITIALIZED))
printk("%s: Lock reclaim failed!\n",
- __FUNCTION__);
+ __func__);
}
continue;
}
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
- __FUNCTION__, status);
+ __func__, status);
case -ENOENT:
case -NFS4ERR_RECLAIM_BAD:
case -NFS4ERR_RECLAIM_CONFLICT:
xdr_inline_pages(&req->rq_rcv_buf, replen, args->pages,
args->pgbase, args->count);
dprintk("%s: inlined page args = (%u, %p, %u, %u)\n",
- __FUNCTION__, replen, args->pages,
+ __func__, replen, args->pages,
args->pgbase, args->count);
out:
p = xdr_inline_decode(xdr, nbytes); \
if (unlikely(!p)) { \
dprintk("nfs: %s: prematurely hit end of receive" \
- " buffer\n", __FUNCTION__); \
+ " buffer\n", __func__); \
dprintk("nfs: %s: xdr->p=%p, bytes=%u, xdr->end=%p\n", \
- __FUNCTION__, xdr->p, nbytes, xdr->end); \
+ __func__, xdr->p, nbytes, xdr->end); \
return -EIO; \
} \
} while (0)
READ_BUF(4);
READ32(*type);
if (*type < NF4REG || *type > NF4NAMEDATTR) {
- dprintk("%s: bad type %d\n", __FUNCTION__, *type);
+ dprintk("%s: bad type %d\n", __func__, *type);
return -EIO;
}
bitmap[0] &= ~FATTR4_WORD0_TYPE;
}
- dprintk("%s: type=0%o\n", __FUNCTION__, nfs_type2fmt[*type].nfs2type);
+ dprintk("%s: type=0%o\n", __func__, nfs_type2fmt[*type].nfs2type);
return 0;
}
READ64(*change);
bitmap[0] &= ~FATTR4_WORD0_CHANGE;
}
- dprintk("%s: change attribute=%Lu\n", __FUNCTION__,
+ dprintk("%s: change attribute=%Lu\n", __func__,
(unsigned long long)*change);
return 0;
}
READ64(*size);
bitmap[0] &= ~FATTR4_WORD0_SIZE;
}
- dprintk("%s: file size=%Lu\n", __FUNCTION__, (unsigned long long)*size);
+ dprintk("%s: file size=%Lu\n", __func__, (unsigned long long)*size);
return 0;
}
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_LINK_SUPPORT;
}
- dprintk("%s: link support=%s\n", __FUNCTION__, *res == 0 ? "false" : "true");
+ dprintk("%s: link support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
}
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_SYMLINK_SUPPORT;
}
- dprintk("%s: symlink support=%s\n", __FUNCTION__, *res == 0 ? "false" : "true");
+ dprintk("%s: symlink support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
}
READ64(fsid->minor);
bitmap[0] &= ~FATTR4_WORD0_FSID;
}
- dprintk("%s: fsid=(0x%Lx/0x%Lx)\n", __FUNCTION__,
+ dprintk("%s: fsid=(0x%Lx/0x%Lx)\n", __func__,
(unsigned long long)fsid->major,
(unsigned long long)fsid->minor);
return 0;
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_LEASE_TIME;
}
- dprintk("%s: file size=%u\n", __FUNCTION__, (unsigned int)*res);
+ dprintk("%s: file size=%u\n", __func__, (unsigned int)*res);
return 0;
}
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_ACLSUPPORT;
}
- dprintk("%s: ACLs supported=%u\n", __FUNCTION__, (unsigned int)*res);
+ dprintk("%s: ACLs supported=%u\n", __func__, (unsigned int)*res);
return 0;
}
READ64(*fileid);
bitmap[0] &= ~FATTR4_WORD0_FILEID;
}
- dprintk("%s: fileid=%Lu\n", __FUNCTION__, (unsigned long long)*fileid);
+ dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return 0;
}
READ64(*fileid);
bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
}
- dprintk("%s: fileid=%Lu\n", __FUNCTION__, (unsigned long long)*fileid);
+ dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return 0;
}
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_AVAIL;
}
- dprintk("%s: files avail=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_FREE;
}
- dprintk("%s: files free=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files free=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_TOTAL;
}
- dprintk("%s: files total=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files total=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
status = 0;
if (unlikely(!(bitmap[0] & FATTR4_WORD0_FS_LOCATIONS)))
goto out;
- dprintk("%s: fsroot ", __FUNCTION__);
+ dprintk("%s: fsroot ", __func__);
status = decode_pathname(xdr, &res->fs_path);
if (unlikely(status != 0))
goto out;
READ32(m);
loc->nservers = 0;
- dprintk("%s: servers ", __FUNCTION__);
+ dprintk("%s: servers ", __func__);
while (loc->nservers < m) {
struct nfs4_string *server = &loc->servers[loc->nservers];
status = decode_opaque_inline(xdr, &server->len, &server->data);
unsigned int i;
dprintk("%s: using first %u of %u servers "
"returned for location %u\n",
- __FUNCTION__,
+ __func__,
NFS4_FS_LOCATION_MAXSERVERS,
m, res->nlocations);
for (i = loc->nservers; i < m; i++) {
res->nlocations++;
}
out:
- dprintk("%s: fs_locations done, error = %d\n", __FUNCTION__, status);
+ dprintk("%s: fs_locations done, error = %d\n", __func__, status);
return status;
out_eio:
status = -EIO;
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_MAXFILESIZE;
}
- dprintk("%s: maxfilesize=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: maxfilesize=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ32(*maxlink);
bitmap[0] &= ~FATTR4_WORD0_MAXLINK;
}
- dprintk("%s: maxlink=%u\n", __FUNCTION__, *maxlink);
+ dprintk("%s: maxlink=%u\n", __func__, *maxlink);
return status;
}
READ32(*maxname);
bitmap[0] &= ~FATTR4_WORD0_MAXNAME;
}
- dprintk("%s: maxname=%u\n", __FUNCTION__, *maxname);
+ dprintk("%s: maxname=%u\n", __func__, *maxname);
return status;
}
*res = (uint32_t)maxread;
bitmap[0] &= ~FATTR4_WORD0_MAXREAD;
}
- dprintk("%s: maxread=%lu\n", __FUNCTION__, (unsigned long)*res);
+ dprintk("%s: maxread=%lu\n", __func__, (unsigned long)*res);
return status;
}
*res = (uint32_t)maxwrite;
bitmap[0] &= ~FATTR4_WORD0_MAXWRITE;
}
- dprintk("%s: maxwrite=%lu\n", __FUNCTION__, (unsigned long)*res);
+ dprintk("%s: maxwrite=%lu\n", __func__, (unsigned long)*res);
return status;
}
*mode &= ~S_IFMT;
bitmap[1] &= ~FATTR4_WORD1_MODE;
}
- dprintk("%s: file mode=0%o\n", __FUNCTION__, (unsigned int)*mode);
+ dprintk("%s: file mode=0%o\n", __func__, (unsigned int)*mode);
return 0;
}
READ32(*nlink);
bitmap[1] &= ~FATTR4_WORD1_NUMLINKS;
}
- dprintk("%s: nlink=%u\n", __FUNCTION__, (unsigned int)*nlink);
+ dprintk("%s: nlink=%u\n", __func__, (unsigned int)*nlink);
return 0;
}
if (len < XDR_MAX_NETOBJ) {
if (nfs_map_name_to_uid(clp, (char *)p, len, uid) != 0)
dprintk("%s: nfs_map_name_to_uid failed!\n",
- __FUNCTION__);
+ __func__);
} else
dprintk("%s: name too long (%u)!\n",
- __FUNCTION__, len);
+ __func__, len);
bitmap[1] &= ~FATTR4_WORD1_OWNER;
}
- dprintk("%s: uid=%d\n", __FUNCTION__, (int)*uid);
+ dprintk("%s: uid=%d\n", __func__, (int)*uid);
return 0;
}
if (len < XDR_MAX_NETOBJ) {
if (nfs_map_group_to_gid(clp, (char *)p, len, gid) != 0)
dprintk("%s: nfs_map_group_to_gid failed!\n",
- __FUNCTION__);
+ __func__);
} else
dprintk("%s: name too long (%u)!\n",
- __FUNCTION__, len);
+ __func__, len);
bitmap[1] &= ~FATTR4_WORD1_OWNER_GROUP;
}
- dprintk("%s: gid=%d\n", __FUNCTION__, (int)*gid);
+ dprintk("%s: gid=%d\n", __func__, (int)*gid);
return 0;
}
*rdev = tmp;
bitmap[1] &= ~ FATTR4_WORD1_RAWDEV;
}
- dprintk("%s: rdev=(0x%x:0x%x)\n", __FUNCTION__, major, minor);
+ dprintk("%s: rdev=(0x%x:0x%x)\n", __func__, major, minor);
return 0;
}
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_AVAIL;
}
- dprintk("%s: space avail=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_FREE;
}
- dprintk("%s: space free=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space free=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_TOTAL;
}
- dprintk("%s: space total=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space total=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
READ64(*used);
bitmap[1] &= ~FATTR4_WORD1_SPACE_USED;
}
- dprintk("%s: space used=%Lu\n", __FUNCTION__,
+ dprintk("%s: space used=%Lu\n", __func__,
(unsigned long long)*used);
return 0;
}
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_ACCESS;
}
- dprintk("%s: atime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: atime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_METADATA;
}
- dprintk("%s: ctime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: ctime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_MODIFY;
}
- dprintk("%s: mtime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: mtime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
if (unlikely(attrwords != nwords)) {
dprintk("%s: server returned incorrect attribute length: "
"%u %c %u\n",
- __FUNCTION__,
+ __func__,
attrwords << 2,
(attrwords < nwords) ? '<' : '>',
nwords << 2);
goto xdr_error;
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
if ((status = verify_attr_len(xdr, savep, attrlen)) == 0)
fattr->valid = NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3 | NFS_ATTR_FATTR_V4;
xdr_error:
- dprintk("%s: xdr returned %d\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d\n", __func__, -status);
return status;
}
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
return decode_delegation(xdr, res);
xdr_error:
- dprintk("%s: Bitmap too large! Length = %u\n", __FUNCTION__, bmlen);
+ dprintk("%s: Bitmap too large! Length = %u\n", __func__, bmlen);
return -EIO;
}
* the call was successful, but incomplete. The caller can retry the
* readdir starting at the last cookie.
*/
- dprintk("%s: short packet at entry %d\n", __FUNCTION__, nr);
+ dprintk("%s: short packet at entry %d\n", __func__, nr);
entry[0] = entry[1] = 0;
if (nr)
goto out;
};
int status;
- dprintk("%s: call getattr\n", __FUNCTION__);
+ dprintk("%s: call getattr\n", __func__);
nfs_fattr_init(fattr);
status = rpc_call_sync(server->nfs_client->cl_rpcclient, &msg, 0);
- dprintk("%s: reply getattr: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply getattr: %d\n", __func__, status);
if (status)
return status;
- dprintk("%s: call statfs\n", __FUNCTION__);
+ dprintk("%s: call statfs\n", __func__);
msg.rpc_proc = &nfs_procedures[NFSPROC_STATFS];
msg.rpc_resp = &fsinfo;
status = rpc_call_sync(server->nfs_client->cl_rpcclient, &msg, 0);
- dprintk("%s: reply statfs: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply statfs: %d\n", __func__, status);
if (status)
return status;
info->rtmax = NFS_MAXDATA;
{
int status;
- dprintk("NFS: %s: %5u, (status %d)\n", __FUNCTION__, task->tk_pid,
+ dprintk("NFS: %s: %5u, (status %d)\n", __func__, task->tk_pid,
task->tk_status);
status = NFS_PROTO(data->inode)->read_done(task, data);
return 0;
out_err:
- dprintk("%s: statfs error = %d\n", __FUNCTION__, -error);
+ dprintk("%s: statfs error = %d\n", __func__, -error);
unlock_kernel();
return error;
}
goto error_splat_super;
}
+ error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ if (error)
+ goto error_splat_root;
+
s->s_flags |= MS_ACTIVE;
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
nfs_free_server(server);
goto out;
+error_splat_root:
+ dput(mntroot);
error_splat_super:
up_write(&s->s_umount);
deactivate_super(s);
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs4_xdev_get_sb() = 0\n");
return 0;
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs4_referral_get_sb() = 0\n");
return 0;
if (page == NULL || test_bit(PG_NEED_COMMIT, &req->wb_flags))
return 0;
- return !PageWriteback(req->wb_page);
+ return !PageWriteback(page);
}
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
out_release_client:
rpc_shutdown_client(client);
out_err:
- put_nfs4_client(clp);
dprintk("NFSD: warning: no callback path to client %.*s\n",
(int)clp->cl_name.len, clp->cl_name.data);
+ put_nfs4_client(clp);
return status;
}
uc[i] = cpu_to_le16(i);
for (r = 0; uc_run_table[r][0]; r++)
for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
- uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
- uc_run_table[r][2]);
+ le16_add_cpu(&uc[i], uc_run_table[r][2]);
for (r = 0; uc_dup_table[r][0]; r++)
for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
- uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
+ le16_add_cpu(&uc[i + 1], -1);
for (r = 0; uc_word_table[r][0]; r++)
uc[uc_word_table[r][0]] = cpu_to_le16(uc_word_table[r][1]);
return uc;
BUG_ON(index >= le16_to_cpu(el->l_next_free_rec));
left_rec = &el->l_recs[index];
- if (index == le16_to_cpu(el->l_next_free_rec - 1) &&
+ if (index == le16_to_cpu(el->l_next_free_rec) - 1 &&
le16_to_cpu(el->l_next_free_rec) == le16_to_cpu(el->l_count)) {
/* we meet with a cross extent block merge. */
ret = ocfs2_get_right_path(inode, left_path, &right_path);
BUG_ON(next_free <= 0);
right_rec = &right_el->l_recs[0];
if (ocfs2_is_empty_extent(right_rec)) {
- BUG_ON(le16_to_cpu(next_free) <= 1);
+ BUG_ON(next_free <= 1);
right_rec = &right_el->l_recs[1];
}
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
-static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
- u32 msgkey, struct task_struct *task, u8 node)
-{
#ifdef CONFIG_DEBUG_FS
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
INIT_LIST_HEAD(&nst->st_net_debug_item);
nst->st_task = task;
nst->st_msg_type = msgtype;
nst->st_msg_key = msgkey;
nst->st_node = node;
-#endif
}
-static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_sock_time);
-#endif
}
-static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_send_time);
-#endif
}
-static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_status_time);
-#endif
}
-static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
struct o2net_sock_container *sc)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_sc = sc;
-#endif
}
-static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_id = msg_id;
-#endif
}
+#endif /* CONFIG_DEBUG_FS */
static inline int o2net_reconnect_delay(void)
{
void o2net_debug_add_sc(struct o2net_sock_container *sc);
void o2net_debug_del_sc(struct o2net_sock_container *sc);
#else
-static int o2net_debugfs_init(void)
+static inline int o2net_debugfs_init(void)
{
return 0;
}
-static void o2net_debugfs_exit(void)
+static inline void o2net_debugfs_exit(void)
{
}
-static void o2net_debug_add_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_del_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_add_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_add_sc(struct o2net_sock_container *sc)
{
}
-static void o2net_debug_del_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_del_sc(struct o2net_sock_container *sc)
{
}
#endif /* CONFIG_DEBUG_FS */
struct timeval st_send_time;
struct timeval st_status_time;
};
+
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node);
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc);
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
+
#else
struct o2net_send_tracking {
u32 dummy;
};
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc)
+{
+}
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+ u32 msg_id)
+{
+}
#endif /* CONFIG_DEBUG_FS */
#endif /* O2CLUSTER_TCP_INTERNAL_H */
#else
-static int dlm_debug_init(struct dlm_ctxt *dlm)
+static inline int dlm_debug_init(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_debug_shutdown(struct dlm_ctxt *dlm)
+static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_root(void)
+static inline int dlm_create_debugfs_root(void)
{
return 0;
}
-static void dlm_destroy_debugfs_root(void)
+static inline void dlm_destroy_debugfs_root(void)
{
}
* negotiated by the client. The client negotiates based on the maximum
* version advertised in /sys/fs/ocfs2/max_locking_protocol. The major
* number from the "SETV" message must match
- * user_stack.sp_proto->lp_max_version.pv_major, and the minor number
+ * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number
* must be less than or equal to ...->lp_max_version.pv_minor.
*
* Once this information has been set, mounts will be allowed. From this
struct ocfs2_control_message_down u_down;
};
-static struct ocfs2_stack_plugin user_stack;
+static struct ocfs2_stack_plugin ocfs2_user_plugin;
static atomic_t ocfs2_control_opened;
static int ocfs2_control_this_node = -1;
char *ptr = NULL;
struct ocfs2_control_private *p = file->private_data;
struct ocfs2_protocol_version *max =
- &user_stack.sp_proto->lp_max_version;
+ &ocfs2_user_plugin.sp_proto->lp_max_version;
if (ocfs2_control_get_handshake_state(file) !=
OCFS2_CONTROL_HANDSHAKE_PROTOCOL)
struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg);
int status = lksb->sb_status;
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
/*
* For now we're punting on the issue of other non-standard errors
*/
if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL)
- user_stack.sp_proto->lp_unlock_ast(astarg, 0);
+ ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0);
else
- user_stack.sp_proto->lp_lock_ast(astarg);
+ ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg);
}
static void fsdlm_blocking_ast_wrapper(void *astarg, int level)
{
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
- user_stack.sp_proto->lp_blocking_ast(astarg, level);
+ ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level);
}
static int user_dlm_lock(struct ocfs2_cluster_connection *conn,
return 0;
}
-static struct ocfs2_stack_operations user_stack_ops = {
+static struct ocfs2_stack_operations ocfs2_user_plugin_ops = {
.connect = user_cluster_connect,
.disconnect = user_cluster_disconnect,
.this_node = user_cluster_this_node,
.dump_lksb = user_dlm_dump_lksb,
};
-static struct ocfs2_stack_plugin user_stack = {
+static struct ocfs2_stack_plugin ocfs2_user_plugin = {
.sp_name = "user",
- .sp_ops = &user_stack_ops,
+ .sp_ops = &ocfs2_user_plugin_ops,
.sp_owner = THIS_MODULE,
};
-static int __init user_stack_init(void)
+static int __init ocfs2_user_plugin_init(void)
{
int rc;
rc = ocfs2_control_init();
if (!rc) {
- rc = ocfs2_stack_glue_register(&user_stack);
+ rc = ocfs2_stack_glue_register(&ocfs2_user_plugin);
if (rc)
ocfs2_control_exit();
}
return rc;
}
-static void __exit user_stack_exit(void)
+static void __exit ocfs2_user_plugin_exit(void)
{
- ocfs2_stack_glue_unregister(&user_stack);
+ ocfs2_stack_glue_unregister(&ocfs2_user_plugin);
ocfs2_control_exit();
}
MODULE_AUTHOR("Oracle");
MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks");
MODULE_LICENSE("GPL");
-module_init(user_stack_init);
-module_exit(user_stack_exit);
+module_init(ocfs2_user_plugin_init);
+module_exit(ocfs2_user_plugin_exit);
seq_printf(m, "%s", header);
CAP_FOR_EACH_U32(__capi) {
seq_printf(m, "%08x",
- a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
+ a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]);
}
seq_printf(m, "\n");
}
NULL, &proc_single_file_operations, \
{ .proc_show = &proc_##OTYPE } )
+/*
+ * Count the number of hardlinks for the pid_entry table, excluding the .
+ * and .. links.
+ */
+static unsigned int pid_entry_count_dirs(const struct pid_entry *entries,
+ unsigned int n)
+{
+ unsigned int i;
+ unsigned int count;
+
+ count = 0;
+ for (i = 0; i < n; ++i) {
+ if (S_ISDIR(entries[i].mode))
+ ++count;
+ }
+
+ return count;
+}
+
int maps_protect;
EXPORT_SYMBOL(maps_protect);
REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
- REG("sessionid", S_IRUSR, sessionid),
+ REG("sessionid", S_IRUGO, sessionid),
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
inode->i_op = &proc_tgid_base_inode_operations;
inode->i_fop = &proc_tgid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 5;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
+ ARRAY_SIZE(tgid_base_stuff));
dentry->d_op = &pid_dentry_operations;
inode->i_op = &proc_tid_base_inode_operations;
inode->i_fop = &proc_tid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 4;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
+ ARRAY_SIZE(tid_base_stuff));
dentry->d_op = &pid_dentry_operations;
}
}
unlock_new_inode(inode);
- }
+ } else
+ module_put(de->owner);
return inode;
out_ino:
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_read(&vm_committed_space);
+ committed = atomic_long_read(&vm_committed_space);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
pfn = src / KPMSIZE;
count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
if (!ppage)
pcount = 0;
else
- pcount = atomic_read(&ppage->_count);
+ pcount = page_mapcount(ppage);
if (put_user(pcount, out++)) {
ret = -EFAULT;
pfn = src / KPMSIZE;
count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
};
struct pagemapread {
- char __user *out, *end;
+ u64 __user *out, *end;
};
#define PM_ENTRY_BYTES sizeof(u64)
static int add_to_pagemap(unsigned long addr, u64 pfn,
struct pagemapread *pm)
{
- /*
- * Make sure there's room in the buffer for an
- * entire entry. Otherwise, only copy part of
- * the pfn.
- */
- if (pm->out + PM_ENTRY_BYTES >= pm->end) {
- if (copy_to_user(pm->out, &pfn, pm->end - pm->out))
- return -EFAULT;
- pm->out = pm->end;
- return PM_END_OF_BUFFER;
- }
-
if (put_user(pfn, pm->out))
return -EFAULT;
- pm->out += PM_ENTRY_BYTES;
+ pm->out++;
+ if (pm->out >= pm->end)
+ return PM_END_OF_BUFFER;
return 0;
}
ret = -EINVAL;
/* file position must be aligned */
- if (*ppos % PM_ENTRY_BYTES)
+ if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES))
goto out_task;
ret = 0;
goto out_pages;
}
- pm.out = buf;
- pm.end = buf + count;
+ pm.out = (u64 *)buf;
+ pm.end = (u64 *)(buf + count);
if (!ptrace_may_attach(task)) {
ret = -EIO;
if (ret == PM_END_OF_BUFFER)
ret = 0;
/* don't need mmap_sem for these, but this looks cleaner */
- *ppos += pm.out - buf;
+ *ppos += (char *)pm.out - buf;
if (!ret)
- ret = pm.out - buf;
+ ret = (char *)pm.out - buf;
}
out_pages:
*/
wait_on_page_writeback(page);
- if (PagePrivate(page))
- try_to_release_page(page, GFP_KERNEL);
+ if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
+ goto out_unlock;
/*
* If we succeeded in removing the mapping, set LRU flag
* Raced with truncate or failed to remove page from current
* address space, unlock and return failure.
*/
+out_unlock:
unlock_page(page);
return 1;
}
while (len) {
size_t read_len;
- loff_t pos = sd->pos;
+ loff_t pos = sd->pos, prev_pos = pos;
ret = do_splice_to(in, &pos, pipe, len, flags);
if (unlikely(ret <= 0))
* could get stuck data in the internal pipe:
*/
ret = actor(pipe, sd);
- if (unlikely(ret <= 0))
+ if (unlikely(ret <= 0)) {
+ sd->pos = prev_pos;
goto out_release;
+ }
bytes += ret;
len -= ret;
sd->pos = pos;
- if (ret < read_len)
+ if (ret < read_len) {
+ sd->pos = prev_pos + ret;
goto out_release;
+ }
}
done:
ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
if (ret > 0)
- *ppos += ret;
+ *ppos = sd.pos;
return ret;
}
*/
int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
- if (sysfs_find_dirent(acxt->parent_sd, sd->s_name)) {
- printk(KERN_WARNING "sysfs: duplicate filename '%s' "
- "can not be created\n", sd->s_name);
- WARN_ON(1);
+ if (sysfs_find_dirent(acxt->parent_sd, sd->s_name))
return -EEXIST;
- }
sd->s_parent = sysfs_get(acxt->parent_sd);
if (unlikely(page == NULL)) {
if (flags & XBF_READ_AHEAD) {
bp->b_page_count = i;
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
return -ENOMEM;
}
ASSERT(!PagePrivate(page));
if (!PageUptodate(page)) {
page_count--;
- if (blocksize < PAGE_CACHE_SIZE && !PagePrivate(page)) {
+ if (blocksize >= PAGE_CACHE_SIZE) {
+ if (flags & XBF_READ)
+ bp->b_flags |= _XBF_PAGE_LOCKED;
+ } else if (!PagePrivate(page)) {
if (test_page_region(page, offset, nbytes))
page_count++;
}
}
- unlock_page(page);
bp->b_pages[i] = page;
offset = 0;
}
+ if (!(bp->b_flags & _XBF_PAGE_LOCKED)) {
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
+ }
+
if (page_count == bp->b_page_count)
bp->b_flags |= XBF_DONE;
bp->b_count_desired = len;
bp->b_buffer_length = buflen;
bp->b_flags |= XBF_MAPPED;
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
return 0;
}
xfs_buf_t *bp,
int schedule)
{
- if (atomic_dec_and_test(&bp->b_io_remaining) == 1)
+ if (atomic_dec_and_test(&bp->b_io_remaining) == 1) {
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
xfs_buf_ioend(bp, schedule);
+ }
}
STATIC void
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
+
+ if (bp->b_flags & _XBF_PAGE_LOCKED)
+ unlock_page(page);
} while (bvec >= bio->bi_io_vec);
_xfs_buf_ioend(bp, 1);
* filesystem block size is not smaller than the page size.
*/
if ((bp->b_buffer_length < PAGE_CACHE_SIZE) &&
- (bp->b_flags & XBF_READ) &&
+ ((bp->b_flags & (XBF_READ|_XBF_PAGE_LOCKED)) ==
+ (XBF_READ|_XBF_PAGE_LOCKED)) &&
(blocksize >= PAGE_CACHE_SIZE)) {
bio = bio_alloc(GFP_NOIO, 1);
_XBF_PAGES = (1 << 18), /* backed by refcounted pages */
_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue */
_XBF_DELWRI_Q = (1 << 21), /* buffer on delwri queue */
+
+ /*
+ * Special flag for supporting metadata blocks smaller than a FSB.
+ *
+ * In this case we can have multiple xfs_buf_t on a single page and
+ * need to lock out concurrent xfs_buf_t readers as they only
+ * serialise access to the buffer.
+ *
+ * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+ * between reads of the page. Hence we can have one thread read the
+ * page and modify it, but then race with another thread that thinks
+ * the page is not up-to-date and hence reads it again.
+ *
+ * The result is that the first modifcation to the page is lost.
+ * This sort of AGF/AGI reading race can happen when unlinking inodes
+ * that require truncation and results in the AGI unlinked list
+ * modifications being lost.
+ */
+ _XBF_PAGE_LOCKED = (1 << 22),
} xfs_buf_flags_t;
typedef enum {
return -xfs_release(XFS_I(inode));
}
+/*
+ * We ignore the datasync flag here because a datasync is effectively
+ * identical to an fsync. That is, datasync implies that we need to write
+ * only the metadata needed to be able to access the data that is written
+ * if we crash after the call completes. Hence if we are writing beyond
+ * EOF we have to log the inode size change as well, which makes it a
+ * full fsync. If we don't write beyond EOF, the inode core will be
+ * clean in memory and so we don't need to log the inode, just like
+ * fsync.
+ */
STATIC int
xfs_file_fsync(
struct file *filp,
struct dentry *dentry,
int datasync)
{
- int flags = FSYNC_WAIT;
-
- if (datasync)
- flags |= FSYNC_DATA;
xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED);
- return -xfs_fsync(XFS_I(dentry->d_inode), flags,
- (xfs_off_t)0, (xfs_off_t)-1);
+ return -xfs_fsync(XFS_I(dentry->d_inode));
}
/*
#define ATTR_NOLOCK 0x200 /* Don't grab any conflicting locks */
#define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */
-/*
- * Flags to vop_fsync/reclaim.
- */
-#define FSYNC_NOWAIT 0 /* asynchronous flush */
-#define FSYNC_WAIT 0x1 /* synchronous fsync or forced reclaim */
-#define FSYNC_INVAL 0x2 /* flush and invalidate cached data */
-#define FSYNC_DATA 0x4 /* synchronous fsync of data only */
-
/*
* Tracking vnode activity.
*/
xfs_mount_t *mp = ip->i_mount;
xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino);
unsigned long first_index, mask;
+ unsigned long inodes_per_cluster;
int ilist_size;
xfs_inode_t **ilist;
xfs_inode_t *iq;
ASSERT(pag->pagi_inodeok);
ASSERT(pag->pag_ici_init);
- ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *);
- ilist = kmem_alloc(ilist_size, KM_MAYFAIL);
+ inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
+ ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
+ ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS);
if (!ilist)
return 0;
read_lock(&pag->pag_ici_lock);
/* really need a gang lookup range call here */
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist,
- first_index,
- XFS_INODE_CLUSTER_SIZE(mp));
+ first_index, inodes_per_cluster);
if (nr_found == 0)
goto out_free;
/*
* xfs_fsync
*
- * This is called to sync the inode and its data out to disk.
- * We need to hold the I/O lock while flushing the data, and
- * the inode lock while flushing the inode. The inode lock CANNOT
- * be held while flushing the data, so acquire after we're done
- * with that.
+ * This is called to sync the inode and its data out to disk. We need to hold
+ * the I/O lock while flushing the data, and the inode lock while flushing the
+ * inode. The inode lock CANNOT be held while flushing the data, so acquire
+ * after we're done with that.
*/
int
xfs_fsync(
- xfs_inode_t *ip,
- int flag,
- xfs_off_t start,
- xfs_off_t stop)
+ xfs_inode_t *ip)
{
xfs_trans_t *tp;
int error;
xfs_itrace_entry(ip);
- ASSERT(start >= 0 && stop >= -1);
-
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return XFS_ERROR(EIO);
- if (flag & FSYNC_DATA)
- filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ /* capture size updates in I/O completion before writing the inode. */
+ error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ if (error)
+ return XFS_ERROR(error);
/*
- * We always need to make sure that the required inode state
- * is safe on disk. The vnode might be clean but because
- * of committed transactions that haven't hit the disk yet.
- * Likewise, there could be unflushed non-transactional
- * changes to the inode core that have to go to disk.
+ * We always need to make sure that the required inode state is safe on
+ * disk. The vnode might be clean but we still might need to force the
+ * log because of committed transactions that haven't hit the disk yet.
+ * Likewise, there could be unflushed non-transactional changes to the
+ * inode core that have to go to disk and this requires us to issue
+ * a synchronous transaction to capture these changes correctly.
*
- * The following code depends on one assumption: that
- * any transaction that changes an inode logs the core
- * because it has to change some field in the inode core
- * (typically nextents or nblocks). That assumption
- * implies that any transactions against an inode will
- * catch any non-transactional updates. If inode-altering
- * transactions exist that violate this assumption, the
- * code breaks. Right now, it figures that if the involved
- * update_* field is clear and the inode is unpinned, the
- * inode is clean. Either it's been flushed or it's been
- * committed and the commit has hit the disk unpinning the inode.
- * (Note that xfs_inode_item_format() called at commit clears
- * the update_* fields.)
+ * This code relies on the assumption that if the update_* fields
+ * of the inode are clear and the inode is unpinned then it is clean
+ * and no action is required.
*/
xfs_ilock(ip, XFS_ILOCK_SHARED);
- /* If we are flushing data then we care about update_size
- * being set, otherwise we care about update_core
- */
- if ((flag & FSYNC_DATA) ?
- (ip->i_update_size == 0) :
- (ip->i_update_core == 0)) {
+ if (!(ip->i_update_size || ip->i_update_core)) {
/*
- * Timestamps/size haven't changed since last inode
- * flush or inode transaction commit. That means
- * either nothing got written or a transaction
- * committed which caught the updates. If the
- * latter happened and the transaction hasn't
- * hit the disk yet, the inode will be still
- * be pinned. If it is, force the log.
+ * Timestamps/size haven't changed since last inode flush or
+ * inode transaction commit. That means either nothing got
+ * written or a transaction committed which caught the updates.
+ * If the latter happened and the transaction hasn't hit the
+ * disk yet, the inode will be still be pinned. If it is,
+ * force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (xfs_ipincount(ip)) {
- _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
- XFS_LOG_FORCE |
- ((flag & FSYNC_WAIT)
- ? XFS_LOG_SYNC : 0),
+ error = _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
+ XFS_LOG_FORCE | XFS_LOG_SYNC,
&log_flushed);
} else {
/*
- * If the inode is not pinned and nothing
- * has changed we don't need to flush the
- * cache.
+ * If the inode is not pinned and nothing has changed
+ * we don't need to flush the cache.
*/
changed = 0;
}
- error = 0;
} else {
/*
- * Kick off a transaction to log the inode
- * core to get the updates. Make it
- * sync if FSYNC_WAIT is passed in (which
- * is done by everybody but specfs). The
- * sync transaction will also force the log.
+ * Kick off a transaction to log the inode core to get the
+ * updates. The sync transaction will also force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
- if ((error = xfs_trans_reserve(tp, 0,
- XFS_FSYNC_TS_LOG_RES(ip->i_mount),
- 0, 0, 0))) {
+ error = xfs_trans_reserve(tp, 0,
+ XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+ if (error) {
xfs_trans_cancel(tp, 0);
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
/*
- * Note - it's possible that we might have pushed
- * ourselves out of the way during trans_reserve
- * which would flush the inode. But there's no
- * guarantee that the inode buffer has actually
- * gone out yet (it's delwri). Plus the buffer
- * could be pinned anyway if it's part of an
- * inode in another recent transaction. So we
- * play it safe and fire off the transaction anyway.
+ * Note - it's possible that we might have pushed ourselves out
+ * of the way during trans_reserve which would flush the inode.
+ * But there's no guarantee that the inode buffer has actually
+ * gone out yet (it's delwri). Plus the buffer could be pinned
+ * anyway if it's part of an inode in another recent
+ * transaction. So we play it safe and fire off the
+ * transaction anyway.
*/
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_ihold(tp, ip);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- if (flag & FSYNC_WAIT)
- xfs_trans_set_sync(tp);
+ xfs_trans_set_sync(tp);
error = _xfs_trans_commit(tp, 0, &log_flushed);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
struct cred *credp);
int xfs_readlink(struct xfs_inode *ip, char *link);
-int xfs_fsync(struct xfs_inode *ip, int flag, xfs_off_t start,
- xfs_off_t stop);
+int xfs_fsync(struct xfs_inode *ip);
int xfs_release(struct xfs_inode *ip);
int xfs_inactive(struct xfs_inode *ip);
int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
-#include <asm/io.h>
-
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) ((void __iomem *)(a))
#ifndef __OMAP_BOARD_PALMTE_H
#define __OMAP_BOARD_PALMTE_H
-#include <asm/arch/gpio.h>
-
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#define PALMTE_TSC_GPIO 4
#endif
};
+struct cpufreq_frequency_table;
+
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
};
extern unsigned int mpurate;
}
#endif
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
+#include <asm/arch/io.h>
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_OMAP1)
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
-#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
#include <asm/types.h>
#include <asm/arch/cpu.h>
#endif
-#include <asm/arch/io.h>
#include <asm/arch/serial.h>
/*
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <asm/arch/board.h>
+
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
struct omap_mmc_conf conf;
- unsigned enabled:1;
/* number of slots on board */
unsigned nr_slots:2;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO and
- * MMCv4 */
- unsigned wire4:1;
+
/* set if your board has components or wiring that limits the
* maximum frequency on the MMC bus */
unsigned int max_freq;
* not supported */
int (* init)(struct device *dev);
void (* cleanup)(struct device *dev);
+ void (* shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
struct omap_mmc_slot_data {
int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
const char *name;
u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (* card_detect)(int irq);
+
+ unsigned int ban_openended:1;
+
} slots[OMAP_MMC_MAX_SLOTS];
};
extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
#endif
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
/* I2C */
#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */
#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */
#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */
+#define GPIO96_FFRXD 96 /* FFUART recieve */
+#define GPIO98_FFRTS 98 /* FFUART request to send */
#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */
+#define GPIO99_FFTXD 99 /* FFUART transmit data */
+#define GPIO100_FFCTS 100 /* FFUART Clear to send */
#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */
#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN)
#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT)
#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN)
#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN)
#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN)
#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN)
#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN)
#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT)
#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN)
#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN)
#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
#define COLLIE_GPIO_CO GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
/*
#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
#define LOCOMO_SPICT 0x04 /* SPI mode control */
#define LOCOMO_SPIST 0x08 /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
+#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
+#define LOCOMO_SPI_RFR (1) /* read buffer bit */
+
#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
-#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
-#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */
-#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
-#define LOCOMO_SPI_RFR (1) /* read buffer bit */
/* GPIO */
#define LOCOMO_GPD 0x90 /* GPIO direction */
#define LOCOMO_GPE 0x94 /* GPIO input enable */
#define LOCOMO_GPL 0x98 /* GPIO level */
-#define LOCOMO_GPO 0x9c /* GPIO out data setteing */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
/* Start the definitions of the devices. Each device has an initial
* base address and a series of offsets from that base address. */
/* Audio controller */
#define LOCOMO_AUDIO 0x54
#define LOCOMO_ACC 0x00 /* Audio clock */
-#define LOCOMO_PAIF 0x7C /* PCM audio interface */
+#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
/* Audio clock */
#define LOCOMO_ACC_XON 0x80
#define LOCOMO_ACC_XEN 0x40
#define LOCOMO_DEVID_AUDIO 3
#define LOCOMO_DEVID_LED 4
#define LOCOMO_DEVID_UART 5
-#define LOCOMO_DEVID_SPI 6
+#define LOCOMO_DEVID_SPI 6
struct locomo_dev {
struct device dev;
int locomo_gpio_read_output(struct device *dev, unsigned int bits);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
/* M62332 control function */
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
#endif /* STRICT_MM_TYPECHECKS */
-typedef struct page *pgtable_t;
-
#endif /* CONFIG_MMU */
+typedef struct page *pgtable_t;
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
-#include <asm/io.h>
/*
* Trivial page table functions.
}
/* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+#define __raw_write_can_lock(x) ((x)->lock == 0)
/*
* Read locks are a bit more hairy:
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
#include <linux/stringify.h>
#include <linux/irqflags.h>
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
#include <linux/linkage.h>
#include <linux/types.h>
-#if defined(CONFIG_DMA_UNCACHED_2M)
+#if defined(CONFIG_DMA_UNCACHED_4M)
+# define DMA_UNCACHED_REGION (4 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_2M)
# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
#elif defined(CONFIG_DMA_UNCACHED_1M)
# define DMA_UNCACHED_REGION (1024 * 1024)
extern void *sram_alloc_with_lsl(size_t, unsigned long);
extern int sram_free_with_lsl(const void*);
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
extern const char bfin_board_name[];
extern unsigned long wall_jiffies;
*
* it's best to have buff aligned on a 32-bit boundary
*/
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum);
+__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
* better 64-bit) boundary
*/
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
- int len, int sum);
+__wsum csum_partial_copy(const void *src, void *dst,
+ int len, __wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
* better 64-bit) boundary
*/
-extern unsigned int csum_partial_copy_from_user(const unsigned char *src,
- unsigned char *dst, int len,
- int sum, int *csum_err);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy((src), (dst), (len), (sum))
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
-static inline unsigned int csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum sum)
{
while (sum >> 16)
sum = (sum & 0xffff) + (sum >> 16);
* returns a 16-bit checksum, already complemented
*/
-static inline unsigned int
-csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
- unsigned short proto, unsigned int sum)
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
{
__asm__ ("%0 = %0 + %1;\n\t"
return (sum);
}
-static inline unsigned short int
-csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
- unsigned short proto, unsigned int sum)
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
* in icmp.c
*/
-extern unsigned short ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
#endif /* _BFIN_CHECKSUM_H */
int gpio_get_value(unsigned gpio);
#ifndef BF548_FAMILY
-#define gpio_get_value(gpio) get_gpio_data(gpio)
#define gpio_set_value(gpio, value) set_gpio_data(gpio, value)
#endif
extern void outsb(unsigned long port, const void *addr, unsigned long count);
extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
extern void outsl(unsigned long port, const void *addr, unsigned long count);
extern void insb(unsigned long port, void *addr, unsigned long count);
extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insw_8(unsigned long port, void *addr, unsigned long count);
extern void insl(unsigned long port, void *addr, unsigned long count);
extern void insl_16(unsigned long port, void *addr, unsigned long count);
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (1)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
#include "defBF522.h"
#include "anomaly.h"
-#if defined(CONFIG_BF527)
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
#include "defBF527.h"
#endif
-#if defined(CONFIG_BF525)
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
#include "defBF525.h"
#endif
#if !defined(__ASSEMBLY__)
#include "cdefBF522.h"
-#if defined(CONFIG_BF527)
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
#include "cdefBF527.h"
#endif
-#if defined(CONFIG_BF525)
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
#include "cdefBF525.h"
#endif
#endif
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000315 (1)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
-
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000158 (0)
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
#define ANOMALY_05000365 (1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
#define CH_MEM_STREAM1_SRC 27 /* RX */
#define CH_MEM_STREAM2_DEST 28
#define CH_MEM_STREAM2_SRC 29
-#define CH_MEM_STREAM3_SRC 30
-#define CH_MEM_STREAM3_DEST 31
+#define CH_MEM_STREAM3_DEST 30
+#define CH_MEM_STREAM3_SRC 31
#define CH_IMEM_STREAM0_DEST 32
#define CH_IMEM_STREAM0_SRC 33
-#define CH_IMEM_STREAM1_SRC 34
-#define CH_IMEM_STREAM1_DEST 35
+#define CH_IMEM_STREAM1_DEST 34
+#define CH_IMEM_STREAM1_SRC 35
#endif
--- /dev/null
+/*
+ * include/asm-blackfin/serial.h
+ */
+
+#define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
: "0" (sum), "1" (iph), "2" (ihl), "3" (4),
"m"(*(volatile struct { int _[100]; } *)iph)
- : "icc0", "icc1"
+ : "icc0", "icc1", "memory"
);
return (__force __sum16)~sum;
#define PAGE_MASK (~(PAGE_SIZE-1))
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define ARCH_KMALLOC_MINALIGN 8
+#define ARCH_SLAB_MINALIGN 8
+
/*****************************************************************************/
/*
* virtual memory layout from kernel's point of view
#ifndef _ASM_GENERIC_GPIO_H
#define _ASM_GENERIC_GPIO_H
+#include <linux/types.h>
+
#ifdef CONFIG_HAVE_GPIO_LIB
+#include <linux/compiler.h>
+
/* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
* extra memory (for code and for per-GPIO table entries).
extern const char *gpiochip_is_requested(struct gpio_chip *chip,
unsigned offset);
-extern int __init __must_check gpiochip_reserve(int start, int ngpio);
+extern int __must_check gpiochip_reserve(int start, int ngpio);
/* add/remove chips */
extern int gpiochip_add(struct gpio_chip *chip);
*/
#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _AMS_H8300_CACHEFLUSH_H
+#define _ASM_H8300_CACHEFLUSH_H
/*
* Cache handling functions
*/
#include <asm/types.h>
-#include <asm/fpu.h>
#include <linux/ioctl.h>
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
-#define KVM_IOAPIC_NUM_PINS 24
+#define KVM_IOAPIC_NUM_PINS 48
struct kvm_ioapic_state {
__u64 base_address;
#define KVM_CONTEXT_SIZE 8*1024
+struct kvm_fpreg {
+ union {
+ unsigned long bits[2];
+ long double __dummy; /* force 16-byte alignment */
+ } u;
+};
+
union context {
/* 8K size */
char dummy[KVM_CONTEXT_SIZE];
unsigned long ibr[8];
unsigned long dbr[8];
unsigned long pkr[8];
- struct ia64_fpreg fr[128];
+ struct kvm_fpreg fr[128];
};
};
extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
extern void ia64_patch_vtop (unsigned long start, unsigned long end);
extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
extern void ia64_patch_gate (void);
#endif /* _ASM_IA64_PATCH_H */
# define KERNEL_STACK_SIZE_ORDER 0
#endif
-#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
#define KERNEL_STACK_SIZE IA64_STK_OFFSET
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
extern char __start_gate_section[];
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <asm/page.h>
+#include <asm/setup.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#else
static inline int access_ok(int type, const void *addr, unsigned long size)
{
- extern unsigned long memory_start, memory_end;
unsigned long val = (unsigned long)addr;
return ((val >= memory_start) && ((val + size) < memory_end));
#ifndef CONFIG_SUN3
#define BUG() do { \
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#else
#define BUG() do { \
#endif
#else
#define BUG() do { \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#endif
#undef MULTI_ISA
#endif
-#define Q40_ISA (1)
-#define GG2_ISA (2)
-#define AG_ISA (3)
+#define ISA_TYPE_Q40 (1)
+#define ISA_TYPE_GG2 (2)
+#define ISA_TYPE_AG (3)
#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
-#define ISA_TYPE Q40_ISA
+#define ISA_TYPE ISA_TYPE_Q40
#define ISA_SEX 0
#endif
#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
-#define ISA_TYPE AG_ISA
+#define ISA_TYPE ISA_TYPE_AG
#define ISA_SEX 1
#endif
#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
-#define ISA_TYPE GG2_ISA
+#define ISA_TYPE ISA_TYPE_GG2
#define ISA_SEX 0
#endif
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_IO_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_IO_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)AG_ISA_IO_B(addr);
+ case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_IO_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_IO_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
switch(ISA_TYPE)
{
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u32 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return 0; /* avoid warnings, just in case */
}
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)addr;
+ case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)addr;
+ case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: isa_outb(0,0x80); break;
+ case ISA_TYPE_Q40: isa_outb(0,0x80); break;
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: break;
+ case ISA_TYPE_GG2: break;
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: break;
+ case ISA_TYPE_AG: break;
#endif
default: break; /* avoid warnings */
}
#ifndef __ASSEMBLY__
extern unsigned long m68k_cputype;
extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype; /* Not really used yet */
+extern unsigned long m68k_mmutype;
#ifdef CONFIG_VME
extern unsigned long vme_brdtype;
#endif
#define VERIFY_WRITE 1
/* We let the MMU do all checking */
-#define access_ok(type,addr,size) 1
+static inline int access_ok(int type, const void __user *addr,
+ unsigned long size)
+{
+ return 1;
+}
/*
* The exception table consists of pairs of addresses: the first is the
#define GIC_SH_RMASK_OFS 0x0300
#define GIC_CLR_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
#define USBD_INTSTAT 0xB020001C
# define USBDEV_INT_SOF (1 << 12)
# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
#define USBD_CONFIG 0xB0200020
u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
static inline pte_t pte_mkyoung(pte_t pte)
{
pte.pte_low |= _PAGE_ACCESSED;
- if (pte.pte_low & _PAGE_READ)
+ if (pte.pte_low & _PAGE_READ) {
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
+ }
return pte;
}
#else
*
*/
-#ifndef __ASM_RTLX_H
+#ifndef __ASM_RTLX_H_
#define __ASM_RTLX_H_
#include <irq.h>
-#ifndef _ASM_IPCBUF_H_
+#ifndef _ASM_IPCBUF_H
#define _ASM_IPCBUF_H
/*
{ \
type ret; \
__asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \
- : "=r" (ret) : "r" (addr), "m" (*addr)); \
+ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
return ret; \
}
static inline void name(volatile type __iomem *addr, type val) \
{ \
__asm__ __volatile__("sync;" insn \
- : "=m" (*addr) : "r" (val), "r" (addr)); \
- IO_SET_SYNC_FLAG(); \
+ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
}
" .long 3b,5b\n" \
".previous" \
: "=&r" (x) \
- : "r" (port + _IO_BASE)); \
+ : "r" (port + _IO_BASE) \
+ : "memory"); \
return x; \
}
" .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
- : : "r" (val), "r" (port + _IO_BASE)); \
+ : : "r" (val), "r" (port + _IO_BASE) \
+ : "memory"); \
}
__do_in_asm(_rec_inb, "lbzx")
*/
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+/* Change the priority of an interrupt. Default is 8 for irqs and
* 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
* IPI number is then the offset'ed (linux irq number mapped to the IPI)
*/
extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
/* Setup a non-boot CPU */
extern void mpic_setup_this_cpu(void);
#ifndef __ASSEMBLY__
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
typedef u32 dma_addr_t;
+#endif
#ifndef __s390x__
typedef union {
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
: "1" (iph), "2" (ihl)
- : "t");
+ : "t", "memory");
return csum_fold(sum);
}
/* Forced breakpoint */
#define breakpoint() __asm__ __volatile__("trapa #0x3c")
-/* Taken from sh-stub.c of GDB 4.18 */
-static const char hexchars[] = "0123456789abcdef";
-
-/* Get high hex bits */
-static inline char highhex(const int x)
-{
- return hexchars[(x >> 4) & 0xf];
-}
-
-/* Get low hex bits */
-static inline char lowhex(const int x)
-{
- return hexchars[x & 0xf];
-}
#endif
-/* $Id: asi.h,v 1.18 1998/03/09 14:04:46 jj Exp $ */
#ifndef _SPARC_ASI_H
#define _SPARC_ASI_H
-/* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $
+/*
* auxio.h: Definitions and code for the Auxiliary I/O register.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: bitops.h,v 1.67 2001/11/19 18:36:34 davem Exp $
+/*
* bitops.h: Bit string operations on the Sparc.
*
* Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: btfixup.h,v 1.4 1998/03/09 14:04:43 jj Exp $
+/*
* asm-sparc/btfixup.h: Macros for boot time linking.
*
* Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: checksum.h,v 1.33 2002/02/01 22:01:05 davem Exp $ */
#ifndef __SPARC_CHECKSUM_H
#define __SPARC_CHECKSUM_H
-/* $Id: clock.h,v 1.3 1995/11/25 02:31:25 davem Exp $
+/*
* clock.h: Definitions for clock operations on the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: contregs.h,v 1.8 2000/12/28 22:49:11 davem Exp $ */
#ifndef _SPARC_CONTREGS_H
#define _SPARC_CONTREGS_H
-/* $Id: cypress.h,v 1.6 1996/08/29 09:48:09 davem Exp $
+/*
* cypress.h: Cypress module specific definitions and defines.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: delay.h,v 1.11 2001/01/01 01:46:15 davem Exp $
+/*
* delay.h: Linux delay routines on the Sparc.
*
* Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
-/* $Id: ebus.h,v 1.2 1999/09/11 23:05:55 zaitcev Exp $
+/*
* ebus.h: PCI to Ebus pseudo driver software state.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
-/* $Id: ecc.h,v 1.3 1996/04/25 06:12:57 davem Exp $
+/*
* ecc.h: Definitions and defines for the external cache/memory
* controller on the sun4m.
*
-/* $Id: eeprom.h,v 1.3 1995/11/25 02:31:38 davem Exp $
+/*
* eeprom.h: Definitions for the Sun eeprom.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: elf.h,v 1.22 2000/07/12 01:27:08 davem Exp $ */
#ifndef __ASMSPARC_ELF_H
#define __ASMSPARC_ELF_H
-/* $Id: fcntl.h,v 1.16 2001/09/20 00:35:33 davem Exp $ */
#ifndef _SPARC_FCNTL_H
#define _SPARC_FCNTL_H
-/* $Id: head.h,v 1.39 2000/05/26 22:18:45 ecd Exp $ */
#ifndef __SPARC_HEAD_H
#define __SPARC_HEAD_H
-/* $Id: idprom.h,v 1.6 1996/08/04 10:35:07 ecd Exp $
+/*
* idprom.h: Macros and defines for idprom routines
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/*
- * $Id: io.h,v 1.30 2001/12/21 01:23:21 davem Exp $
- */
#ifndef __SPARC_IO_H
#define __SPARC_IO_H
-/* $Id: ioctl.h,v 1.6 1999/12/01 23:58:36 davem Exp $ */
#ifndef _SPARC_IOCTL_H
#define _SPARC_IOCTL_H
-/* $Id: kdebug.h,v 1.11 2000/06/04 06:23:53 anton Exp $
+/*
* kdebug.h: Defines and definitions for debugging the Linux kernel
* under various kernel debuggers.
*
-/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+/*
* machines.h: Defines for taking apart the machine type value in the
* idprom and determining the kind of machine we are on.
*
-/* $Id: mbus.h,v 1.9 1997/06/24 15:48:12 jj Exp $
+/*
* mbus.h: Various defines for MBUS modules.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */
#ifndef _SPARC_MEMREG_H
#define _SPARC_MEMREG_H
/* memreg.h: Definitions of the values found in the synchronous
-/* $Id: mman.h,v 1.9 2000/03/15 02:44:23 davem Exp $ */
#ifndef __SPARC_MMAN_H__
#define __SPARC_MMAN_H__
-/* $Id: mostek.h,v 1.13 2001/01/11 15:07:09 davem Exp $
+/*
* mostek.h: Describes the various Mostek time of day clock registers.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: mpmbox.h,v 1.4 1996/04/25 06:13:19 davem Exp $
+/*
* mpmbox.h: Interface and defines for the OpenProm mailbox
* facilities for MP machines under Linux.
*
-/* $Id: msi.h,v 1.3 1996/08/29 09:48:25 davem Exp $
+/*
* msi.h: Defines specific to the MBus - Sbus - Interface.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: mxcc.h,v 1.7 1997/04/20 14:11:46 ecd Exp $
+/*
* mxcc.h: Definitions of the Viking MXCC registers
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: namei.h,v 1.16 2000/04/13 00:55:54 davem Exp $
+/*
* linux/include/asm-sparc/namei.h
*
* Routines to handle famous /usr/gnemul/s*.
-/* $Id: obio.h,v 1.4 1998/03/09 14:04:55 jj Exp $
+/*
* obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
*
* Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
-/* $Id: openprom.h,v 1.24 2000/06/04 06:23:53 anton Exp $ */
#ifndef __SPARC_OPENPROM_H
#define __SPARC_OPENPROM_H
-/* $Id: oplib.h,v 1.23 2001/12/21 00:54:31 davem Exp $
+/*
* oplib.h: Describes the interface and available routines in the
* Linux Prom library.
*
-/* $Id: page.h,v 1.55 2000/10/30 21:01:41 davem Exp $
+/*
* page.h: Various defines and such for MMU operations on the Sparc for
* the Linux kernel.
*
-/* $Id: param.h,v 1.4 2000/10/30 21:01:41 davem Exp $ */
#ifndef _ASMSPARC_PARAM_H
#define _ASMSPARC_PARAM_H
-/* $Id: pbm.h,v 1.3 1999/12/20 17:06:35 zaitcev Exp $
+/*
*
* pbm.h: PCI bus module pseudo driver software state
* Adopted from sparc64 by V. Roganov and G. Raiko
-/* $Id: pcic.h,v 1.4 1999/11/17 07:34:20 zaitcev Exp $
+/*
* pcic.h: JavaEngine 1 specific PCI definitions.
*
* Copyright (C) 1998 V. Roganov and G. Raiko
-/* $Id: pgalloc.h,v 1.16 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC_PGALLOC_H
#define _SPARC_PGALLOC_H
-/* $Id: pgtable.h,v 1.110 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC_PGTABLE_H
#define _SPARC_PGTABLE_H
-/* $Id: pgtsrmmu.h,v 1.31 2000/07/16 21:48:52 anton Exp $
+/*
* pgtsrmmu.h: SRMMU page table defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: pgtsun4.h,v 1.5 2000/06/05 06:08:46 anton Exp $
+/*
* pgtsun4.h: Sun4 specific pgtable.h defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: pgtsun4c.h,v 1.37 2000/06/05 06:08:46 anton Exp $
+/*
* pgtsun4c.h: Sun4c specific pgtable.h defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: psr.h,v 1.15 1997/10/04 08:54:22 ecd Exp $
+/*
* psr.h: This file holds the macros for masking off various parts of
* the processor status register on the Sparc. This is valid
* for Version 8. On the V9 this is renamed to the PSTATE
-/* $Id: ptrace.h,v 1.25 1997/03/04 16:27:25 jj Exp $ */
#ifndef _SPARC_PTRACE_H
#define _SPARC_PTRACE_H
-/* $Id: resource.h,v 1.12 2000/09/23 02:09:21 davem Exp $
+/*
* resource.h: Resource definitions.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: ross.h,v 1.13 1998/01/07 06:49:11 baccala Exp $
+/*
* ross.h: Ross module specific definitions and defines.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: rtc.h,v 1.2 1996/08/21 23:17:39 ecd Exp $
- *
+/*
* rtc.h: Definitions for access to the Mostek real time clock
*
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
-/* $Id: sbi.h,v 1.2 1998/03/09 14:04:48 jj Exp $
+/*
* sbi.h: SBI (Sbus Interface on sun4d) definitions
*
* Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
-/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $
+/*
* sbus.h: Defines for the Sun SBus.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: scatterlist.h,v 1.8 2001/12/17 07:05:15 davem Exp $ */
#ifndef _SPARC_SCATTERLIST_H
#define _SPARC_SCATTERLIST_H
-/* $Id: shmparam.h,v 1.6 1999/12/09 10:32:41 davem Exp $ */
#ifndef _ASMSPARC_SHMPARAM_H
#define _ASMSPARC_SHMPARAM_H
-/* $Id: sigcontext.h,v 1.14 1999/09/06 08:22:05 jj Exp $ */
#ifndef __SPARC_SIGCONTEXT_H
#define __SPARC_SIGCONTEXT_H
-/* $Id: siginfo.h,v 1.9 2002/02/08 03:57:18 davem Exp $
- * siginfo.c:
- */
-
#ifndef _SPARC_SIGINFO_H
#define _SPARC_SIGINFO_H
-/* $Id: signal.h,v 1.35 1999/09/06 08:22:04 jj Exp $ */
#ifndef _ASMSPARC_SIGNAL_H
#define _ASMSPARC_SIGNAL_H
-/* $Id: smpprim.h,v 1.5 1996/08/29 09:48:49 davem Exp $
+/*
* smpprim.h: SMP locking primitives on the Sparc
*
* God knows we won't be actually using this code for some time
-/* $Id: socket.h,v 1.17 2001/06/13 16:25:03 davem Exp $ */
#ifndef _ASM_SOCKET_H
#define _ASM_SOCKET_H
-/* $Id: stat.h,v 1.12 2000/08/04 05:35:55 davem Exp $ */
#ifndef _SPARC_STAT_H
#define _SPARC_STAT_H
-/* $Id: statfs.h,v 1.4 1996/06/07 00:41:05 ecd Exp $ */
#ifndef _SPARC_STATFS_H
#define _SPARC_STATFS_H
-/* $Id: string.h,v 1.36 2001/12/21 00:54:31 davem Exp $
+/*
* string.h: External definitions for optimized assembly string
* routines for the Linux Kernel.
*
-/* $Id: sun4paddr.h,v 1.3 1998/07/28 16:53:27 jj Exp $
+/*
* sun4paddr.h: Various physical addresses on sun4 machines
*
* Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
-/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $
+/*
* include/asm-sparc/sunbpp.h
*/
-/* $Id: sysen.h,v 1.3 1995/11/25 02:32:58 davem Exp $
+/*
* sysen.h: Bit fields within the "System Enable" register accessed via
* the ASI_CONTROL address space at address AC_SYSENABLE.
*
-/* $Id: termios.h,v 1.32 2001/06/01 08:12:11 davem Exp $ */
#ifndef _SPARC_TERMIOS_H
#define _SPARC_TERMIOS_H
-/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
+/*
* timer.h: Definitions for the timer chips on the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: traps.h,v 1.9 1998/03/09 14:04:53 jj Exp $
+/*
* traps.h: Format of entries for the Sparc trap table.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: tsunami.h,v 1.5 1996/08/29 09:49:03 davem Exp $
+/*
* tsunami.h: Module specific definitions for Tsunami V8 Sparcs
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: turbosparc.h,v 1.4 1998/08/16 16:02:42 ecd Exp $
+/*
* turbosparc.h: Defines specific to the TurboSparc module.
* This is SRMMU stuff.
*
-/* $Id: types.h,v 1.13 2001/12/21 01:22:59 davem Exp $ */
#ifndef _SPARC_TYPES_H
#define _SPARC_TYPES_H
-/* $Id: uaccess.h,v 1.24 2001/10/30 04:32:24 davem Exp $
+/*
* uaccess.h: User space memore access functions.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */
#ifndef _SPARC_VAC_OPS_H
#define _SPARC_VAC_OPS_H
-/* $Id: vaddrs.h,v 1.27 2001/07/04 00:18:18 davem Exp $ */
#ifndef _SPARC_VADDRS_H
#define _SPARC_VADDRS_H
-/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
+/*
* viking.h: Defines specific to the GNU/Viking MBUS module.
* This is SRMMU stuff.
*
-/* $Id: winmacro.h,v 1.22 2000/05/09 17:40:15 davem Exp $
+/*
* winmacro.h: Window loading-unloading macros.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: apb.h,v 1.2 1998/04/01 20:41:49 ecd Exp $
+/*
* apb.h: Advanced PCI Bridge Configuration Registers and Bits
*
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
-/* $Id: asi.h,v 1.5 2001/03/29 11:47:47 davem Exp $ */
#ifndef _SPARC64_ASI_H
#define _SPARC64_ASI_H
-/* $Id: auxio.h,v 1.3 2001/06/05 08:16:34 davem Exp $
+/*
* auxio.h: Definitions and code for the Auxiliary I/O registers.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: bbc.h,v 1.2 2001/03/26 23:47:18 davem Exp $
+/*
* bbc.h: Defines for BootBus Controller found on UltraSPARC-III
* systems.
*
-/* $Id: bitops.h,v 1.39 2002/01/30 01:40:00 davem Exp $
+/*
* bitops.h: Bit string operations on the V9.
*
* Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: chafsr.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
#ifndef _SPARC64_CHAFSR_H
#define _SPARC64_CHAFSR_H
-/* $Id: checksum.h,v 1.19 2002/02/09 19:49:31 davem Exp $ */
#ifndef __SPARC64_CHECKSUM_H
#define __SPARC64_CHECKSUM_H
-/* $Id: chmctrl.h,v 1.1 2001/03/29 11:43:28 davem Exp $ */
#ifndef _SPARC64_CHMCTRL_H
#define _SPARC64_CHMCTRL_H
-/* $Id: dcr.h,v 1.4 2001/03/09 17:56:37 davem Exp $ */
#ifndef _SPARC64_DCR_H
#define _SPARC64_DCR_H
-/* $Id: display7seg.h,v 1.2 2000/08/02 06:22:35 davem Exp $
+/*
*
* display7seg - Driver interface for the 7-segment display
* present on Sun Microsystems CP1400 and CP1500
-/* $Id: dma.h,v 1.21 2001/12/13 04:16:52 davem Exp $
+/*
* include/asm-sparc64/dma.h
*
* Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
-/* $Id: ebus.h,v 1.10 2001/03/14 05:00:55 davem Exp $
+/*
* ebus.h: PCI to Ebus pseudo driver software state.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
-/* $Id: elf.h,v 1.32 2002/02/09 19:49:31 davem Exp $ */
#ifndef __ASM_SPARC64_ELF_H
#define __ASM_SPARC64_ELF_H
-/* $Id: envctrl.h,v 1.3 2000/11/03 00:37:40 davem Exp $
+/*
*
* envctrl.h: Definitions for access to the i2c environment
* monitoring on Ultrasparc systems.
-/* $Id: estate.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
#ifndef _SPARC64_ESTATE_H
#define _SPARC64_ESTATE_H
-/* $Id: fcntl.h,v 1.12 2001/09/20 00:35:34 davem Exp $ */
#ifndef _SPARC64_FCNTL_H
#define _SPARC64_FCNTL_H
-/* $Id: fhc.h,v 1.5 1999/09/21 14:39:29 davem Exp $
+/*
* fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
*
* Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
-/* $Id: head.h,v 1.30 1997/08/08 08:34:33 jj Exp $ */
#ifndef _SPARC64_HEAD_H
#define _SPARC64_HEAD_H
-/* $Id: ide.h,v 1.21 2001/09/25 20:21:48 kanoj Exp $
+/*
* ide.h: Ultra/PCI specific IDE glue.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: idprom.h,v 1.2 1997/04/04 00:50:16 davem Exp $
+/*
* idprom.h: Macros and defines for idprom routines
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outw(u16 w, unsigned long addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outl(u32 l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define inb(__addr) (_inb((unsigned long)(__addr)))
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writeq(u64 q, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
: /* no outputs */
- : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define readb(__addr) _readb(__addr)
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
#define sbus_readb(__addr) _sbus_readb(__addr)
-/* $Id: ioctl.h,v 1.2 1998/10/15 05:40:38 jj Exp $ */
#ifndef _SPARC64_IOCTL_H
#define _SPARC64_IOCTL_H
-/* $Id: ioctls.h,v 1.7 1998/02/23 02:49:41 davem Exp $ */
#ifndef _ASM_SPARC64_IOCTLS_H
#define _ASM_SPARC64_IOCTLS_H
-/* $Id: lsu.h,v 1.2 1997/04/04 00:50:22 davem Exp $ */
#ifndef _SPARC64_LSU_H
#define _SPARC64_LSU_H
-/* $Id: mman.h,v 1.2 2000/03/15 02:44:26 davem Exp $ */
#ifndef __SPARC64_MMAN_H__
#define __SPARC64_MMAN_H__
-/* $Id: mmu_context.h,v 1.54 2002/02/09 19:49:31 davem Exp $ */
#ifndef __SPARC64_MMU_CONTEXT_H
#define __SPARC64_MMU_CONTEXT_H
-/* $Id: namei.h,v 1.17 2000/04/13 00:55:54 davem Exp $
+/*
* linux/include/asm-sparc64/namei.h
*
* Routines to handle famous /usr/gnemul/s*.
-/* $Id: openprom.h,v 1.9 2001/03/16 10:22:02 davem Exp $ */
#ifndef __SPARC64_OPENPROM_H
#define __SPARC64_OPENPROM_H
-/* $Id: page.h,v 1.39 2002/02/09 19:49:31 davem Exp $ */
-
#ifndef _SPARC64_PAGE_H
#define _SPARC64_PAGE_H
-/* $Id: pgalloc.h,v 1.30 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC64_PGALLOC_H
#define _SPARC64_PGALLOC_H
-/* $Id: pgtable.h,v 1.156 2002/02/09 19:49:31 davem Exp $
+/*
* pgtable.h: SpitFire page table operations.
*
* Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: pil.h,v 1.1 2002/01/23 11:27:36 davem Exp $ */
#ifndef _SPARC64_PIL_H
#define _SPARC64_PIL_H
-/* $Id: processor.h,v 1.83 2002/02/10 06:04:33 davem Exp $
+/*
* include/asm-sparc64/processor.h
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: psrcompat.h,v 1.5 1998/10/06 09:28:39 jj Exp $ */
#ifndef _SPARC64_PSRCOMPAT_H
#define _SPARC64_PSRCOMPAT_H
-/* $Id: pstate.h,v 1.6 1997/06/25 07:39:45 jj Exp $ */
#ifndef _SPARC64_PSTATE_H
#define _SPARC64_PSTATE_H
#ifdef __KERNEL__
+struct global_reg_snapshot {
+ unsigned long tstate;
+ unsigned long tpc;
+ unsigned long tnpc;
+ unsigned long o7;
+ unsigned long i7;
+ struct thread_info *thread;
+ unsigned long pad1;
+ unsigned long pad2;
+};
+
#define __ARCH_WANT_COMPAT_SYS_PTRACE
#define force_successful_syscall_return() \
#define SF_XARG5 0x58
#define SF_XXARG 0x5c
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE 0x00
+#define GR_SNAP_TPC 0x08
+#define GR_SNAP_TNPC 0x10
+#define GR_SNAP_O7 0x18
+#define GR_SNAP_I7 0x20
+#define GR_SNAP_THREAD 0x28
+#define GR_SNAP_PAD1 0x30
+#define GR_SNAP_PAD2 0x38
+
+#endif /* __KERNEL__ */
+
/* Stuff for the ptrace system call */
#define PTRACE_SPARC_DETACH 11
#define PTRACE_GETREGS 12
-/* $Id: reg.h,v 1.6 1999/09/06 08:22:10 jj Exp $
+/*
* linux/asm-sparc64/reg.h
* Layout of the registers as expected by gdb on the Sparc
* we should replace the user.h definitions with those in
-/* $Id: resource.h,v 1.8 2000/09/23 02:09:21 davem Exp $
+/*
* resource.h: Resource definitions.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: rtc.h,v 1.1 1996/12/26 14:22:35 davem Exp $
- *
+/*
* rtc.h: Definitions for access to the Mostek real time clock
*
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
-/* $Id: rwsem.h,v 1.5 2001/11/18 00:12:56 davem Exp $
+/*
* rwsem.h: R/W semaphores implemented using CAS
*
* Written by David S. Miller (davem@redhat.com), 2001.
-/* $Id: scatterlist.h,v 1.11 2001/12/17 07:05:15 davem Exp $ */
#ifndef _SPARC64_SCATTERLIST_H
#define _SPARC64_SCATTERLIST_H
-/* $Id: shmparam.h,v 1.5 2001/09/24 21:17:57 kanoj Exp $ */
#ifndef _ASMSPARC64_SHMPARAM_H
#define _ASMSPARC64_SHMPARAM_H
-/* $Id: sigcontext.h,v 1.12 1999/09/06 08:22:09 jj Exp $ */
#ifndef __SPARC64_SIGCONTEXT_H
#define __SPARC64_SIGCONTEXT_H
-/* $Id: signal.h,v 1.9 1999/09/06 08:22:11 jj Exp $ */
#ifndef _ASMSPARC64_SIGNAL_H
#define _ASMSPARC64_SIGNAL_H
/* smp.h: Sparc64 specific SMP stuff.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_SMP_H
extern void smp_fill_in_sib_core_maps(void);
extern void cpu_play_dead(void);
+extern void smp_fetch_global_regs(void);
+
#ifdef CONFIG_HOTPLUG_CPU
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
#define hard_smp_processor_id() 0
#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
#endif /* !(CONFIG_SMP) */
-/* $Id: socket.h,v 1.10 2001/06/13 16:25:03 davem Exp $ */
#ifndef _ASM_SOCKET_H
#define _ASM_SOCKET_H
-/* $Id: starfire.h,v 1.2 2001/07/04 00:18:18 davem Exp $
+/*
* starfire.h: Group all starfire specific code together.
*
* Copyright (C) 2000 Anton Blanchard (anton@samba.org)
-/* $Id: stat.h,v 1.7 2000/08/04 05:35:55 davem Exp $ */
#ifndef _SPARC64_STAT_H
#define _SPARC64_STAT_H
-/* $Id: statfs.h,v 1.2 1997/04/14 17:05:22 jj Exp $ */
#ifndef _SPARC64_STATFS_H
#define _SPARC64_STATFS_H
-/* $Id: string.h,v 1.20 2001/09/27 04:36:24 kanoj Exp $
+/*
* string.h: External definitions for optimized assembly string
* routines for the Linux Kernel.
*
-/* $Id: sunbpp.h,v 1.1 1999/08/13 06:21:44 shadow Exp $
+/*
* include/asm-sparc64/sunbpp.h
*/
-/* $Id: termios.h,v 1.11 2001/06/01 08:12:11 davem Exp $ */
#ifndef _SPARC64_TERMIOS_H
#define _SPARC64_TERMIOS_H
-/* $Id: ttable.h,v 1.18 2002/02/09 19:49:32 davem Exp $ */
#ifndef _SPARC64_TTABLE_H
#define _SPARC64_TTABLE_H
-/* $Id: types.h,v 1.4 2001/10/09 02:24:35 davem Exp $ */
#ifndef _SPARC64_TYPES_H
#define _SPARC64_TYPES_H
-/* $Id: uaccess.h,v 1.35 2002/02/09 19:49:31 davem Exp $ */
#ifndef _ASM_UACCESS_H
#define _ASM_UACCESS_H
-/* $Id: uctx.h,v 1.1 1997/06/18 16:51:58 davem Exp $
+/*
* uctx.h: Sparc64 {set,get}context() register state layouts.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
-/* $Id: utrap.h,v 1.1 1997/10/14 16:21:31 jj Exp $
+/*
* include/asm-sparc64/utrap.h
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-/* $Id: watchdog.h,v 1.1 2001/01/18 04:47:44 davem Exp $
+/*
*
* watchdog - Driver interface for the hardware watchdog timers
* present on Sun Microsystems boardsets
static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
{
/*
- * This is called by fs/exec.c and fs/aio.c. In the first case, for an
- * exec, we don't need to do anything as we're called from userspace
- * and thus going to use a new host PID. In the second, we're called
- * from a kernel thread, and thus need to go doing the mmap's on the
- * host. Since they're very expensive, we want to avoid that as far as
- * possible.
+ * This is called by fs/exec.c and sys_unshare()
+ * when the new ->mm is used for the first time.
*/
- if (old != new && (current->flags & PF_BORROWED_MM))
- __switch_mm(&new->context.id);
-
+ __switch_mm(&new->context.id);
arch_dup_mmap(old, new);
}
* Written by Miles Bader <miles@gnu.org>
*/
-#ifndef __CLINKAGE_H__
+#ifndef __V850_CLINKAGE_H__
#define __V850_CLINKAGE_H__
#include <asm/macrology.h>
#else /* CONFIG_X86_32 */
+extern void finit(void);
+
static inline void tolerant_fwait(void)
{
asm volatile("fnclex ; fwait");
u8 modrm_rm;
u8 use_modrm_ea;
unsigned long modrm_ea;
+ void *modrm_ptr;
unsigned long modrm_val;
struct fetch_cache fetch;
};
#ifdef __KERNEL__
-#define PHYSICAL_PAGE_MASK (PAGE_MASK & __PHYSICAL_MASK)
-#define PTE_MASK (_AT(long, PHYSICAL_PAGE_MASK))
+#define __PHYSICAL_MASK ((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+ virtual addresses are 32-bits but physical addresses are larger
+ (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK (((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
#define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT)
#define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1))
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-#define __PHYSICAL_MASK _AT(phys_addr_t, (_AC(1,ULL) << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK ((_AC(1,UL) << __VIRTUAL_MASK_SHIFT) - 1)
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
#endif
write_cr3(pgd);
}
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_MASK))
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_MASK))
/* Find an entry in the second-level page table.. */
static inline unsigned long pte_pfn(pte_t pte)
{
- return (pte_val(pte) & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte_val(pte) & PTE_MASK) >> PAGE_SHIFT;
}
/*
#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
_PAGE_DIRTY)
+/* Set of bits not changed in pte_modify */
#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_PCD | _PAGE_PWT | \
_PAGE_ACCESSED | _PAGE_DIRTY)
return __pgprot(preservebits | addbits);
}
-#define pte_pgprot(x) __pgprot(pte_val(x) & (0xfff | _PAGE_NX))
+#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK)
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val((x)))
#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
#define pmd_page_vaddr(pmd) \
- ((unsigned long)__va(pmd_val((pmd)) & PAGE_MASK))
+ ((unsigned long)__va(pmd_val((pmd)) & PTE_MASK))
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
#ifndef __ASSEMBLY__
-static inline unsigned long pgd_bad(pgd_t pgd)
+static inline int pgd_bad(pgd_t pgd)
{
- return pgd_val(pgd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pgd_val(pgd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pud_bad(pud_t pud)
+static inline int pud_bad(pud_t pud)
{
- return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pud_val(pud) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pmd_bad(pmd_t pmd)
+static inline int pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pmd_val(pmd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
#define pte_none(x) (!pte_val((x)))
static inline void __native_flush_tlb_global(void)
{
- unsigned long cr4 = read_cr4();
+ unsigned long flags;
+ unsigned long cr4;
+ /*
+ * Read-modify-write to CR4 - protect it from preemption and
+ * from interrupts. (Use the raw variant because this code can
+ * be called from deep inside debugging code.)
+ */
+ raw_local_irq_save(flags);
+
+ cr4 = read_cr4();
/* clear PGE */
write_cr4(cr4 & ~X86_CR4_PGE);
/* write old PGE again and flush TLBs */
write_cr4(cr4);
+
+ raw_local_irq_restore(flags);
}
static inline void __native_flush_tlb_single(unsigned long addr)
static inline unsigned long pte_mfn(pte_t pte)
{
- return (pte.pte & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte.pte & PTE_MASK) >> PAGE_SHIFT;
}
static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
header-y += if_strip.h
header-y += if_tun.h
header-y += if_tunnel.h
-header-y += in6.h
header-y += in_route.h
header-y += ioctl.h
header-y += ip6_tunnel.h
header-y += jffs2.h
header-y += keyctl.h
header-y += limits.h
-header-y += dlm_plock.h
header-y += magic.h
header-y += major.h
header-y += matroxfb.h
unifdef-y += dccp.h
unifdef-y += dirent.h
unifdef-y += dlm.h
+unifdef-y += dlm_plock.h
unifdef-y += edd.h
unifdef-y += elf.h
unifdef-y += elfcore.h
unifdef-y += igmp.h
unifdef-y += inet_diag.h
unifdef-y += in.h
+unifdef-y += in6.h
unifdef-y += inotify.h
unifdef-y += input.h
unifdef-y += ip.h
* documentation. Do not change them.
*/
-#ifdef __KERNEL__
-#include <linux/socket.h>
-#include <linux/types.h>
-#endif
#include <linux/compiler.h>
#include <linux/atmapi.h>
#include <linux/atmsap.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/* general ATM constants */
char pub[ATM_E164_LEN+1]; /* public address (E.164) */
/* unused addresses must be bzero'ed */
char lij_type; /* role in LIJ call; one of ATM_LIJ* */
- uint32_t lij_id; /* LIJ call identifier */
+ __u32 lij_id; /* LIJ call identifier */
} sas_addr __ATM_API_ALIGN; /* SVC address */
};
#define LINUX_ATM_TCP_H
#include <linux/atmapi.h>
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#endif
+#include <linux/atm.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/*
*/
struct atmtcp_hdr {
- uint16_t vpi;
- uint16_t vci;
- uint32_t length; /* ... of data part */
+ __u16 vpi;
+ __u16 vci;
+ __u32 length; /* ... of data part */
};
/*
extern void compute_creds(struct linux_binprm *binprm);
extern int do_coredump(long signr, int exit_code, struct pt_regs * regs);
extern int set_binfmt(struct linux_binfmt *new);
+extern void free_bprm(struct linux_binprm *);
#endif /* __KERNEL__ */
#endif /* _LINUX_BINFMTS_H */
return byte_rev_table[byte];
}
+extern u16 bitrev16(u16 in);
extern u32 bitrev32(u32 in);
#endif /* _LINUX_BITREV_H */
enum blktrace_notify {
__BLK_TN_PROCESS = 0, /* establish pid/name mapping */
__BLK_TN_TIMESTAMP, /* include system clock */
+ __BLK_TN_MESSAGE, /* Character string message */
};
#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_IO_TRACE_MAGIC 0x65617400
#define BLK_IO_TRACE_VERSION 0x07
int trace_state;
struct rchan *rchan;
unsigned long *sequence;
+ unsigned char *msg_data;
u16 act_mask;
u64 start_lba;
u64 end_lba;
extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *);
extern int do_blk_trace_setup(struct request_queue *q,
char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
+/**
+ * blk_add_trace_msg - Add a (simple) message to the blktrace stream
+ * @q: queue the io is for
+ * @fmt: format to print message in
+ * args... Variable argument list for format
+ *
+ * Description:
+ * Records a (simple) message onto the blktrace stream.
+ *
+ * NOTE: BLK_TN_MAX_MSG characters are output at most.
+ * NOTE: Can not use 'static inline' due to presence of var args...
+ *
+ **/
+#define blk_add_trace_msg(q, fmt, ...) \
+ do { \
+ struct blk_trace *bt = (q)->blk_trace; \
+ if (unlikely(bt)) \
+ __trace_note_message(bt, fmt, ##__VA_ARGS__); \
+ } while (0)
+#define BLK_TN_MAX_MSG 128
/**
* blk_add_trace_rq - Add a trace for a request oriented action
#define blk_trace_setup(q, name, dev, arg) (-ENOTTY)
#define blk_trace_startstop(q, start) (-ENOTTY)
#define blk_trace_remove(q) (-ENOTTY)
+#define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#endif /* __KERNEL__ */
#endif
#define _LINUX_CAPABILITY_VERSION_1 0x19980330
#define _LINUX_CAPABILITY_U32S_1 1
-#define _LINUX_CAPABILITY_VERSION_2 0x20071026
+#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
#define _LINUX_CAPABILITY_U32S_2 2
-#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_2
-#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_2
+#define _LINUX_CAPABILITY_VERSION_3 0x20080522
+#define _LINUX_CAPABILITY_U32S_3 2
typedef struct __user_cap_header_struct {
__u32 version;
} data[VFS_CAP_U32];
};
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
+
+#else
+
+#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
typedef struct kernel_cap_struct {
- __u32 cap[_LINUX_CAPABILITY_U32S];
+ __u32 cap[_KERNEL_CAPABILITY_U32S];
} kernel_cap_t;
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
*/
#define CAP_FOR_EACH_U32(__capi) \
- for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi)
+ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
# define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \
| CAP_TO_MASK(CAP_DAC_OVERRIDE) \
# define CAP_FS_MASK_B1 (CAP_TO_MASK(CAP_MAC_OVERRIDE))
-#if _LINUX_CAPABILITY_U32S != 2
+#if _KERNEL_CAPABILITY_U32S != 2
# error Fix up hand-coded capability macro initializers
#else /* HAND-CODED capability initializers */
# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
CAP_FS_MASK_B1 } })
-#endif /* _LINUX_CAPABILITY_U32S != 2 */
+#endif /* _KERNEL_CAPABILITY_U32S != 2 */
#define CAP_INIT_INH_SET CAP_EMPTY_SET
return dev->bus_id;
}
+extern int dev_set_name(struct device *dev, const char *name, ...)
+ __attribute__((format(printf, 2, 3)));
+
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
/*
* Easy functions for dynamically creating devices on the fly
*/
+extern struct device *device_create_vargs(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt,
+ va_list vargs);
extern struct device *device_create(struct class *cls, struct device *parent,
dev_t devt, const char *fmt, ...)
__attribute__((format(printf, 4, 5)));
+extern struct device *device_create_drvdata(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+ __attribute__((format(printf, 5, 6)));
extern void device_destroy(struct class *cls, dev_t devt);
/*
void put_files_struct(struct files_struct *fs);
void reset_files_struct(struct files_struct *);
int unshare_files(struct files_struct **);
+struct files_struct *dup_fd(struct files_struct *, int *);
extern struct kmem_cache *files_cachep;
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);
-extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
+ loff_t *ppos, const void *from, size_t available);
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available);
#ifdef CONFIG_MIGRATION
extern int buffer_migrate_page(struct address_space *,
#else
+#include <linux/types.h>
+#include <linux/errno.h>
+
/*
* Some platforms don't support the GPIO programming interface.
*
#define __HID_H
/*
- * $Id: hid.h,v 1.24 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
#define HID_QUIRK_HWHEEL_WHEEL_INVERT 0x04000000
#define HID_QUIRK_MICROSOFT_KEYS 0x08000000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
+#define HID_QUIRK_APPLE_NUMLOCK_EMULATION 0x20000000
/*
* Separate quirks for runtime report descriptor fixup
#define _HIDDEV_H
/*
- * $Id: hiddev.h,v 1.2 2001/04/26 11:26:09 vojtech Exp $
- *
* Copyright (c) 1999-2000 Vojtech Pavlik
*
* Sponsored by SuSE
* @driver: device's driver, hence pointer to access routines
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
- * @driver_name: Identifies new-style driver used with this device; also
- * used as the module name for hotplug/coldplug modprobe support.
* @list: list of active/busy clients (DEPRECATED)
* @released: used to synchronize client releases & detaches and references
*
struct i2c_driver *driver; /* and our access routines */
struct device dev; /* the device structure */
int irq; /* irq issued by device (or -1) */
- char driver_name[KOBJ_NAME_LEN];
struct list_head list; /* DEPRECATED */
struct completion released;
};
/**
* struct i2c_board_info - template for device creation
- * @driver_name: identifies the driver to be bound to the device
- * @type: optional chip type information, to initialize i2c_client.name
+ * @type: chip type, to initialize i2c_client.name
* @flags: to initialize i2c_client.flags
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
* with the adapter already known.
*/
struct i2c_board_info {
- char driver_name[KOBJ_NAME_LEN];
char type[I2C_NAME_SIZE];
unsigned short flags;
unsigned short addr;
* @context: optional parameter passed to setup() and teardown()
*
* In addition to the I2C_BOARD_INFO() state appropriate to each chip,
- * the i2c_board_info used with the pcf875x driver must provide the
- * chip "type" ("pcf8574", "pcf8574a", "pcf8575", "pcf8575c") and its
+ * the i2c_board_info used with the pcf875x driver must provide its
* platform_data (pointer to one of these structures) with at least
* the gpio_base value initialized.
*
#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
#define RTCF_NOTIFY 0x00010000
-#define RTCF_DIRECTDST 0x00020000
+#define RTCF_DIRECTDST 0x00020000 /* unused */
#define RTCF_REDIRECTED 0x00040000
-#define RTCF_TPROXY 0x00080000
+#define RTCF_TPROXY 0x00080000 /* unused */
-#define RTCF_FAST 0x00200000
-#define RTCF_MASQ 0x00400000
-#define RTCF_SNAT 0x00800000
+#define RTCF_FAST 0x00200000 /* unused */
+#define RTCF_MASQ 0x00400000 /* unused */
+#define RTCF_SNAT 0x00800000 /* unused */
#define RTCF_DOREDIRECT 0x01000000
#define RTCF_DIRECTSRC 0x04000000
#define RTCF_DNAT 0x08000000
#define RTCF_BROADCAST 0x10000000
#define RTCF_MULTICAST 0x20000000
-#define RTCF_REJECT 0x40000000
+#define RTCF_REJECT 0x40000000 /* unused */
#define RTCF_LOCAL 0x80000000
#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT)
__be32 ifa_address;
__be32 ifa_mask;
__be32 ifa_broadcast;
- __be32 ifa_anycast;
unsigned char ifa_scope;
unsigned char ifa_flags;
unsigned char ifa_prefixlen;
#ifndef _LINUX__INIT_TASK_H
#define _LINUX__INIT_TASK_H
-#include <linux/fdtable.h>
#include <linux/rcupdate.h>
#include <linux/irqflags.h>
#include <linux/utsname.h>
#include <linux/securebits.h>
#include <net/net_namespace.h>
-#define INIT_FDTABLE \
-{ \
- .max_fds = NR_OPEN_DEFAULT, \
- .fd = &init_files.fd_array[0], \
- .close_on_exec = (fd_set *)&init_files.close_on_exec_init, \
- .open_fds = (fd_set *)&init_files.open_fds_init, \
- .rcu = RCU_HEAD_INIT, \
- .next = NULL, \
-}
-
-#define INIT_FILES \
-{ \
- .count = ATOMIC_INIT(1), \
- .fdt = &init_files.fdtab, \
- .fdtab = INIT_FDTABLE, \
- .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), \
- .next_fd = 0, \
- .close_on_exec_init = { { 0, } }, \
- .open_fds_init = { { 0, } }, \
- .fd_array = { NULL, } \
-}
+extern struct files_struct init_files;
#define INIT_KIOCTX(name, which_mm) \
{ \
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RADIO 0x03 /* set = radio enabled */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
struct proc_dir_entry *j_proc_entry;
struct transaction_stats_s j_stats;
+ /* Failed journal commit ID */
+ unsigned int j_failed_commit;
+
/*
* An opaque pointer to fs-private information. ext3 puts its
* superblock pointer here
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
- ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_BUS = 2,
- ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
ATAPI_MAX_DRAIN = 16 << 10,
ATA_EH_PMP_TRIES = 5,
ATA_EH_PMP_LINK_TRIES = 3,
- SATA_PMP_SCR_TIMEOUT = 250,
+ SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
- ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */
+ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
unsigned short udma; /* t2CYCTYP/2 */
};
-#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
-
/*
* Core layer - drivers/ata/libata-core.c
*/
extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
struct scsi_host_template *sht, void *host_priv);
#endif /* CONFIG_PCI */
-/**
- * ata_sff_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
- ata_sff_altstatus(ap);
- ndelay(400);
-}
-
/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
unsigned long nr_pages);
-/*
- * Walk through all memory which is registered as resource.
- * arg is (start_pfn, nr_pages, private_arg_pointer)
- */
-extern int walk_memory_resource(unsigned long start_pfn,
- unsigned long nr_pages, void *arg,
- int (*func)(unsigned long, unsigned long, void *));
-
#ifdef CONFIG_NUMA
extern int memory_add_physaddr_to_nid(u64 start);
#else
#endif /* ! CONFIG_MEMORY_HOTPLUG */
+/*
+ * Walk through all memory which is registered as resource.
+ * arg is (start_pfn, nr_pages, private_arg_pointer)
+ */
+extern int walk_memory_resource(unsigned long start_pfn,
+ unsigned long nr_pages, void *arg,
+ int (*func)(unsigned long, unsigned long, void *));
+
extern int add_memory(int nid, u64 start, u64 size);
extern int arch_add_memory(int nid, u64 start, u64 size);
extern int remove_memory(u64 start, u64 size);
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_t vm_committed_space;
+extern atomic_long_t vm_committed_space;
#ifdef CONFIG_SMP
extern void vm_acct_memory(long pages);
#else
static inline void vm_acct_memory(long pages)
{
- atomic_add(pages, &vm_committed_space);
+ atomic_long_add(pages, &vm_committed_space);
}
#endif
extern struct zone *next_zone(struct zone *zone);
/**
- * for_each_pgdat - helper macro to iterate over all nodes
+ * for_each_online_pgdat - helper macro to iterate over all online nodes
* @pgdat - pointer to a pg_data_t variable
*/
#define for_each_online_pgdat(pgdat) \
struct i2c_device_id {
char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
+ kernel_ulong_t driver_data /* Data private to the driver */
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
};
#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
- return 0xf8 <= media || media == 0xf0;
-}
-
#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
#endif
}
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+ return 0xf8 <= media || media == 0xf0;
+}
+
/* fat/cache.c */
extern void fat_cache_inval_inode(struct inode *inode);
extern int fat_get_cluster(struct inode *inode, int cluster,
#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
#define MSGTQL MSGMNB /* number of system message headers */
#define MSGMAP MSGMNB /* number of entries in message map */
#define MSGSSZ 16 /* message segment size */
-#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
#ifdef __KERNEL__
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
* Steven J. Hill <sjhill@realitydiluted.com>
* Thomas Gleixner <tglx@linutronix.de>
*
/* rtnetlink link ops */
const struct rtnl_link_ops *rtnl_link_ops;
+ /* VLAN feature mask */
+ unsigned long vlan_features;
+
/* for setting kernel sock attribute on TCP connection setup */
#define GSO_MAX_SIZE 65536
unsigned int gso_max_size;
#ifdef __KERNEL__
#include <linux/init.h>
-#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/list.h>
#include <net/net_namespace.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
/* Responses from hook functions. */
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_arp.h>
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv4.h>
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv6.h>
}
#endif /* !PAGEFLAGS_EXTENDED */
+
+#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \
+ 1 << PG_buddy | 1 << PG_writeback | \
+ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active)
+
+/*
+ * Flags checked in bad_page(). Pages on the free list should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty)
+
+/*
+ * Flags checked when a page is freed. Pages being freed should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have these flags set. It they are, there
+ * is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty)
+
#endif /* !__GENERATING_BOUNDS_H */
#endif /* PAGE_FLAGS_H */
#define PCI_VENDOR_ID_INTASHIELD 0x135a
#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
+#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036
#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff
#define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031
#define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032
void bitmap_flush(mddev_t *mddev);
void bitmap_destroy(mddev_t *mddev);
-char *file_path(struct file *file, char *buf, int count);
void bitmap_print_sb(struct bitmap *bitmap);
void bitmap_update_sb(struct bitmap *bitmap);
*/
#define MD_PATCHLEVEL_VERSION 3
+extern int mdp_major;
+
extern int register_md_personality (struct mdk_personality *p);
extern int unregister_md_personality (struct mdk_personality *p);
extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev),
int sync_speed_min;
int sync_speed_max;
+ /* resync even though the same disks are shared among md-devices */
+ int parallel_resync;
+
int ok_start_degraded;
/* recovery/resync flags
* NEEDED: we might need to start a resync/recover
* RUNNING: a thread is running, or about to be started
* SYNC: actually doing a resync, not a recovery
- * ERR: and IO error was detected - abort the resync/recovery
- * INTR: someone requested a (clean) early abort.
+ * INTR: resync needs to be aborted for some reason
* DONE: thread is done and is waiting to be reaped
* REQUEST: user-space has requested a sync (used with SYNC)
* CHECK: user-space request for for check-only, no repair
*/
#define MD_RECOVERY_RUNNING 0
#define MD_RECOVERY_SYNC 1
-#define MD_RECOVERY_ERR 2
#define MD_RECOVERY_INTR 3
#define MD_RECOVERY_DONE 4
#define MD_RECOVERY_NEEDED 5
RTA_PREFSRC,
RTA_METRICS,
RTA_MULTIPATH,
- RTA_PROTOINFO,
+ RTA_PROTOINFO, /* no longer used */
RTA_FLOW,
RTA_CACHEINFO,
- RTA_SESSION,
+ RTA_SESSION, /* no longer used */
RTA_MP_ALGO, /* no longer used */
RTA_TABLE,
__RTA_MAX
struct sched_domain *child; /* bottom domain must be null terminated */
struct sched_group *groups; /* the balancing groups of the domain */
cpumask_t span; /* span of all CPUs in this domain */
- int first_cpu; /* cache of the first cpu in this domain */
unsigned long min_interval; /* Minimum balance interval ms */
unsigned long max_interval; /* Maximum balance interval ms */
unsigned int busy_factor; /* less balancing by factor if busy */
extern void exit_files(struct task_struct *);
extern void __cleanup_signal(struct signal_struct *);
extern void __cleanup_sighand(struct sighand_struct *);
+
extern void exit_itimers(struct signal_struct *);
+extern void flush_itimer_signals(void);
extern NORET_TYPE void do_group_exit(int);
void (*shutdown)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
+ void (*set_ldisc)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
return kmalloc(size, flags | __GFP_ZERO);
}
+/**
+ * kzalloc_node - allocate zeroed memory from a particular memory node.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ * @node: memory node from which to allocate
+ */
+static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
+{
+ return kmalloc_node(size, flags | __GFP_ZERO, node);
+}
+
#ifdef CONFIG_SLABINFO
extern const struct seq_operations slabinfo_op;
ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1)
#define SM501FB_FLAG_USE_HWCURSOR (1<<2)
#define SM501FB_FLAG_USE_HWACCEL (1<<3)
-#define SM501FB_FLAG_PANEL_USE_FPEN (1<<4)
-#define SM501FB_FLAG_PANEL_USE_VBIASEN (1<<5)
+#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4)
+#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5)
struct sm501_platdata_fbsub {
struct fb_videomode *def_mode;
#ifndef __LINUX_SPI_MMC_SPI_H
#define __LINUX_SPI_MMC_SPI_H
+#include <linux/interrupt.h>
+
struct device;
struct mmc_host;
* completes.
*/
struct svc_rdma_op_ctxt {
- struct svc_rdma_op_ctxt *next;
+ struct svc_rdma_op_ctxt *read_hdr;
+ struct list_head free_list;
struct xdr_buf arg;
struct list_head dto_q;
enum ib_wr_opcode wr_op;
struct page *pages[RPCSVC_MAXPAGES];
};
-#define RDMACTXT_F_READ_DONE 1
#define RDMACTXT_F_LAST_CTXT 2
struct svcxprt_rdma {
struct ib_pd *sc_pd;
- struct svc_rdma_op_ctxt *sc_ctxt_head;
+ atomic_t sc_ctxt_used;
+ struct list_head sc_ctxt_free;
int sc_ctxt_cnt;
int sc_ctxt_bump;
int sc_ctxt_max;
struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */
struct list_head sc_read_complete_q;
spinlock_t sc_read_complete_lock;
+ struct work_struct sc_work;
};
/* sc_flags */
#define RDMAXPRT_RQ_PENDING 1
/* svc_rdma_transport.c */
extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *);
-extern int svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
- enum rpcrdma_errcode);
+extern void svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
+ enum rpcrdma_errcode);
struct page *svc_rdma_get_page(void);
extern int svc_rdma_post_recv(struct svcxprt_rdma *);
extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
u32 lost_retrans_low; /* Sent seq after any rxmit (lowest) */
u16 advmss; /* Advertised MSS */
- u16 prior_ssthresh; /* ssthresh saved at recovery start */
+ u32 prior_ssthresh; /* ssthresh saved at recovery start */
u32 lost_out; /* Lost packets */
u32 sacked_out; /* SACK'd packets */
u32 fackets_out; /* FACK'd packets */
.busy_idx = 3, \
.idle_idx = 3, \
.flags = SD_LOAD_BALANCE \
- | SD_SERIALIZE, \
+ | SD_BALANCE_NEWIDLE \
+ | SD_WAKE_AFFINE \
+ | SD_SERIALIZE, \
.last_balance = jiffies, \
.balance_interval = 64, \
}
#define N_6PACK 7
#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
/* cards about SMS messages */
typedef u32 resource_size_t;
#endif
-#endif /* __KERNEL__ */
-
struct ustat {
__kernel_daddr_t f_tfree;
__kernel_ino_t f_tinode;
char f_fpack[6];
};
+#endif /* __KERNEL__ */
+
#endif /* _LINUX_TYPES_H */
__u8 bNumberPowerFilters;
} __attribute__ ((packed));
+/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
+struct usb_cdc_dmm_desc {
+ __u8 bFunctionLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u16 bcdVersion;
+ __le16 wMaxCommand;
+} __attribute__ ((packed));
+
/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
struct usb_cdc_mdlm_desc {
__u8 bLength;
#define V4L2_CID_HFLIP (V4L2_CID_BASE+20)
#define V4L2_CID_VFLIP (V4L2_CID_BASE+21)
-/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23)
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER (V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER (V4L2_CID_BASE+23)
#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24)
enum v4l2_power_line_frequency {
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
struct virtio_blk_config
{
/* The capacity (in 512-byte sectors). */
- __le64 capacity;
+ __u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
- __le32 size_max;
+ __u32 size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
- __le32 seg_max;
+ __u32 seg_max;
/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
struct virtio_blk_geometry {
- __le16 cylinders;
+ __u16 cylinders;
__u8 heads;
__u8 sectors;
} geometry;
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
#ifdef __KERNEL__
#include <linux/virtio.h>
* The return value is -ENOENT if the feature doesn't exist. Otherwise
* the config value is copied into whatever is pointed to by v. */
#define virtio_config_val(vdev, fbit, offset, v) \
- virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+ virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
--- /dev/null
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG 4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
#define WM9713_COO 0x0001 /* enable coordinate mode */
+#define WM9713_45W 0x1000 /* set for 5 wire panel */
#define WM9713_PDEN 0x0800 /* measure only when pen down */
#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
#define WM9713_WAIT 0x0200 /* coordinate wait */
#define VFL_TYPE_VTX 3
/* Video standard functions */
-extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
extern char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
int id, char *name);
int videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory);
+int __videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory);
int videobuf_mmap_free(struct videobuf_queue *q);
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma);
extern void addrconf_leave_solict(struct inet6_dev *idev,
struct in6_addr *addr);
+static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+ unsigned unit)
+{
+ if (timeout == 0xffffffff)
+ return ~0UL;
+
+ /*
+ * Avoid arithmetic overflow.
+ * Assuming unit is constant and non-zero, this "if" statement
+ * will go away on 64bit archs.
+ */
+ if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
+ return LONG_MAX / unit;
+
+ return timeout;
+}
+
+static inline int addrconf_finite_timeout(unsigned long timeout)
+{
+ return ~timeout;
+}
+
/*
* IPv6 Address Label subsystem (addrlabel.c)
*/
* @skb: socket buffer the message is stored in
* @hdr: generic netlink message header
*/
-static inline int genlmsg_cancel(struct sk_buff *skb, void *hdr)
+static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr)
{
- return nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+ nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
}
/**
void ieee80211_scan_completed(struct ieee80211_hw *hw);
/**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
*
* @hw: the hardware struct of which the interfaces should be iterated over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
* @data: first argument of the iterator function
*/
void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
struct ieee80211_vif *vif),
void *data);
+/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+ void (*iterator)(void *data,
+ u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data);
+
/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
* @hw: pointer as obtained from ieee80211_alloc_hw().
void __user *buffer,
size_t *lenp,
loff_t *ppos);
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen);
#endif
extern void inet6_ifinfo_notify(int event,
* @skb: socket buffer the message is stored in
* @mark: mark to trim to
*
- * Trims the message to the provided mark. Returns -1.
+ * Trims the message to the provided mark.
*/
-static inline int nlmsg_trim(struct sk_buff *skb, const void *mark)
+static inline void nlmsg_trim(struct sk_buff *skb, const void *mark)
{
if (mark)
skb_trim(skb, (unsigned char *) mark - skb->data);
-
- return -1;
}
/**
* @nlh: netlink message header
*
* Removes the complete netlink message including all
- * attributes from the socket buffer again. Returns -1.
+ * attributes from the socket buffer again.
*/
-static inline int nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
+static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
{
- return nlmsg_trim(skb, nlh);
+ nlmsg_trim(skb, nlh);
}
/**
const struct nla_policy *policy,
int len)
{
- if (nla_len(nla) < len)
- return -1;
- if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr))
- return nla_parse_nested(tb, maxtype,
- nla_data(nla) + NLA_ALIGN(len),
- policy);
+ int nested_len = nla_len(nla) - NLA_ALIGN(len);
+
+ if (nested_len < 0)
+ return -EINVAL;
+ if (nested_len >= nla_attr_size(0))
+ return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
+ nested_len, policy);
memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
return 0;
}
* @start: container attribute
*
* Removes the container attribute and including all nested
- * attributes. Returns -1.
+ * attributes. Returns -EMSGSIZE
*/
-static inline int nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
+static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
{
- return nlmsg_trim(skb, start);
+ nlmsg_trim(skb, start);
}
/**
struct dst_entry *(*get_dst) (struct sctp_association *asoc,
union sctp_addr *daddr,
union sctp_addr *saddr);
- void (*get_saddr) (struct sctp_association *asoc,
+ void (*get_saddr) (struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr);
int (*is_ce) (const struct sk_buff *sk);
void (*seq_dump_addr)(struct seq_file *seq,
union sctp_addr *addr);
+ void (*ecn_capable)(struct sock *sk);
__u16 net_header_len;
int sockaddr_len;
sa_family_t sa_family;
* calculation completes (i.e. the DATA chunk
* is SACK'd) clear this flag.
*/
- int rto_pending;
+ __u8 rto_pending;
+
+ /* Flag to track the current fast recovery state */
+ __u8 fast_recovery;
/*
* These are the congestion stats.
/* Data that has been sent, but not acknowledged. */
__u32 flight_size;
+ /* TSN marking the fast recovery exit point */
+ __u32 fast_recovery_exit;
+
/* Destination */
struct dst_entry *dst;
/* Source address. */
struct sctp_sock *);
void sctp_transport_pmtu(struct sctp_transport *);
void sctp_transport_free(struct sctp_transport *);
-void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *, int);
void sctp_transport_hold(struct sctp_transport *);
void sctp_transport_put(struct sctp_transport *);
void sctp_transport_update_rto(struct sctp_transport *, __u32);
/* How many unackd bytes do we have in-flight? */
__u32 outstanding_bytes;
+ /* Are we doing fast-rtx on this queue */
+ char fast_rtx;
+
/* Corked? */
char cork;
struct msghdr *msg,
struct sk_buff *skb);
-extern int datagram_send_ctl(struct msghdr *msg,
+extern int datagram_send_ctl(struct net *net,
+ struct msghdr *msg,
struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass);
extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg, size_t len);
+extern void udp_flush_pending_frames(struct sock *sk);
extern int udp_rcv(struct sk_buff *skb);
extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
- IB_DEVICE_SEND_W_INV = (1<<21),
};
enum ib_atomic_cap {
unsigned short pcmreg[3]; // PCM registers
unsigned short codec_cfg[3]; // CODEC_CFG bits
unsigned char swap_mic_linein; // AD1986/AD1986A only
+ unsigned char lo_as_master; /* LO as master */
} ad18xx;
unsigned int dev_flags; /* device specific */
} spec;
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
+ default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
menu "General setup"
static int md_setup_ents __initdata;
-extern int mdp_major;
/*
* Parse the command-line parameters given our kernel, but do not
* actually try to invoke the MD device now; that is handled by
if (allowed < MSGMNI) {
ns->msg_ctlmni = MSGMNI;
- goto out_callback;
+ return;
}
if (allowed > IPCMNI / nb_ns) {
ns->msg_ctlmni = IPCMNI / nb_ns;
- goto out_callback;
+ return;
}
ns->msg_ctlmni = allowed;
-
-out_callback:
-
- printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n",
- ns->msg_ctlmni, ns);
}
void msg_init_ns(struct ipc_namespace *ns)
void __init msg_init(void)
{
msg_init_ns(&init_ipc_ns);
+
+ printk(KERN_INFO "msgmni has been set to %d\n",
+ init_ipc_ns.msg_ctlmni);
+
ipc_init_proc_interface("sysvipc/msg",
" key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
IPC_MSG_IDS, sysvipc_msg_proc_show);
skb = audit_make_reply(pid, seq, type, done, multi, payload, size);
if (!skb)
- return;
+ goto out;
reply->pid = pid;
reply->skb = skb;
tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
- if (IS_ERR(tsk)) {
- kfree(reply);
- kfree_skb(skb);
- }
+ if (!IS_ERR(tsk))
+ return;
+ kfree_skb(skb);
+out:
+ kfree(reply);
}
/*
struct audit_chunk *audit_tree_lookup(const struct inode *inode)
{
struct list_head *list = chunk_hash(inode);
- struct list_head *pos;
+ struct audit_chunk *p;
- list_for_each_rcu(pos, list) {
- struct audit_chunk *p = container_of(pos, struct audit_chunk, hash);
+ list_for_each_entry_rcu(p, list, hash) {
if (p->watch.inode == inode) {
get_inotify_watch(&p->watch);
return p;
}
}
+/*
+ * Version 2 capabilities worked fine, but the linux/capability.h file
+ * that accompanied their introduction encouraged their use without
+ * the necessary user-space source code changes. As such, we have
+ * created a version 3 with equivalent functionality to version 2, but
+ * with a header change to protect legacy source code from using
+ * version 2 when it wanted to use version 1. If your system has code
+ * that trips the following warning, it is using version 2 specific
+ * capabilities and may be doing so insecurely.
+ *
+ * The remedy is to either upgrade your version of libcap (to 2.10+,
+ * if the application is linked against it), or recompile your
+ * application with modern kernel headers and this warning will go
+ * away.
+ */
+
+static void warn_deprecated_v2(void)
+{
+ static int warned;
+
+ if (!warned) {
+ char name[sizeof(current->comm)];
+
+ printk(KERN_INFO "warning: `%s' uses deprecated v2"
+ " capabilities in a way that may be insecure.\n",
+ get_task_comm(name, current));
+ warned = 1;
+ }
+}
+
+/*
+ * Version check. Return the number of u32s in each capability flag
+ * array, or a negative value on error.
+ */
+static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy)
+{
+ __u32 version;
+
+ if (get_user(version, &header->version))
+ return -EFAULT;
+
+ switch (version) {
+ case _LINUX_CAPABILITY_VERSION_1:
+ warn_legacy_capability_use();
+ *tocopy = _LINUX_CAPABILITY_U32S_1;
+ break;
+ case _LINUX_CAPABILITY_VERSION_2:
+ warn_deprecated_v2();
+ /*
+ * fall through - v3 is otherwise equivalent to v2.
+ */
+ case _LINUX_CAPABILITY_VERSION_3:
+ *tocopy = _LINUX_CAPABILITY_U32S_3;
+ break;
+ default:
+ if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version))
+ return -EFAULT;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/*
* For sys_getproccap() and sys_setproccap(), any of the three
* capability set pointers may be NULL -- indicating that that set is
{
int ret = 0;
pid_t pid;
- __u32 version;
struct task_struct *target;
unsigned tocopy;
kernel_cap_t pE, pI, pP;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
spin_unlock(&task_capability_lock);
if (!ret) {
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i;
for (i = 0; i < tocopy; i++) {
}
/*
- * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S,
+ * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S,
* we silently drop the upper capabilities here. This
* has the effect of making older libcap
* implementations implicitly drop upper capability
*/
asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
{
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i, tocopy;
kernel_cap_t inheritable, permitted, effective;
- __u32 version;
struct task_struct *target;
int ret;
pid_t pid;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
permitted.cap[i] = kdata[i].permitted;
inheritable.cap[i] = kdata[i].inheritable;
}
- while (i < _LINUX_CAPABILITY_U32S) {
+ while (i < _KERNEL_CAPABILITY_U32S) {
effective.cap[i] = 0;
permitted.cap[i] = 0;
inheritable.cap[i] = 0;
cg = tsk->cgroups;
parent = task_cgroup(tsk, subsys->subsys_id);
- snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "node_%d", tsk->pid);
+ snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
/* Pin the hierarchy */
atomic_inc(&parent->root->sb->s_active);
retval = cpulist_parse(buf, trialcs.cpus_allowed);
if (retval < 0)
return retval;
+
+ if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map))
+ return -EINVAL;
}
- cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map);
retval = validate_change(cs, &trialcs);
if (retval < 0)
return retval;
retval = nodelist_parse(buf, trialcs.mems_allowed);
if (retval < 0)
goto done;
+
+ if (!nodes_subset(trialcs.mems_allowed,
+ node_states[N_HIGH_MEMORY]))
+ return -EINVAL;
}
- nodes_and(trialcs.mems_allowed, trialcs.mems_allowed,
- node_states[N_HIGH_MEMORY]);
oldmem = cs->mems_allowed;
if (nodes_equal(oldmem, trialcs.mems_allowed)) {
retval = 0; /* Too easy - nothing to do */
__unhash_process(tsk);
+ /*
+ * Do this under ->siglock, we can race with another thread
+ * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
+ */
+ flush_sigqueue(&tsk->pending);
+
tsk->signal = NULL;
tsk->sighand = NULL;
spin_unlock(&sighand->siglock);
__cleanup_sighand(sighand);
clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
- flush_sigqueue(&tsk->pending);
if (sig) {
flush_sigqueue(&sig->shared_pending);
taskstats_tgid_free(sig);
return 0;
}
-static int count_open_files(struct fdtable *fdt)
-{
- int size = fdt->max_fds;
- int i;
-
- /* Find the last open fd */
- for (i = size/(8*sizeof(long)); i > 0; ) {
- if (fdt->open_fds->fds_bits[--i])
- break;
- }
- i = (i+1) * 8 * sizeof(long);
- return i;
-}
-
-static struct files_struct *alloc_files(void)
-{
- struct files_struct *newf;
- struct fdtable *fdt;
-
- newf = kmem_cache_alloc(files_cachep, GFP_KERNEL);
- if (!newf)
- goto out;
-
- atomic_set(&newf->count, 1);
-
- spin_lock_init(&newf->file_lock);
- newf->next_fd = 0;
- fdt = &newf->fdtab;
- fdt->max_fds = NR_OPEN_DEFAULT;
- fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
- fdt->open_fds = (fd_set *)&newf->open_fds_init;
- fdt->fd = &newf->fd_array[0];
- INIT_RCU_HEAD(&fdt->rcu);
- fdt->next = NULL;
- rcu_assign_pointer(newf->fdt, fdt);
-out:
- return newf;
-}
-
-/*
- * Allocate a new files structure and copy contents from the
- * passed in files structure.
- * errorp will be valid only when the returned files_struct is NULL.
- */
-static struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
-{
- struct files_struct *newf;
- struct file **old_fds, **new_fds;
- int open_files, size, i;
- struct fdtable *old_fdt, *new_fdt;
-
- *errorp = -ENOMEM;
- newf = alloc_files();
- if (!newf)
- goto out;
-
- spin_lock(&oldf->file_lock);
- old_fdt = files_fdtable(oldf);
- new_fdt = files_fdtable(newf);
- open_files = count_open_files(old_fdt);
-
- /*
- * Check whether we need to allocate a larger fd array and fd set.
- * Note: we're not a clone task, so the open count won't change.
- */
- if (open_files > new_fdt->max_fds) {
- new_fdt->max_fds = 0;
- spin_unlock(&oldf->file_lock);
- spin_lock(&newf->file_lock);
- *errorp = expand_files(newf, open_files-1);
- spin_unlock(&newf->file_lock);
- if (*errorp < 0)
- goto out_release;
- new_fdt = files_fdtable(newf);
- /*
- * Reacquire the oldf lock and a pointer to its fd table
- * who knows it may have a new bigger fd table. We need
- * the latest pointer.
- */
- spin_lock(&oldf->file_lock);
- old_fdt = files_fdtable(oldf);
- }
-
- old_fds = old_fdt->fd;
- new_fds = new_fdt->fd;
-
- memcpy(new_fdt->open_fds->fds_bits,
- old_fdt->open_fds->fds_bits, open_files/8);
- memcpy(new_fdt->close_on_exec->fds_bits,
- old_fdt->close_on_exec->fds_bits, open_files/8);
-
- for (i = open_files; i != 0; i--) {
- struct file *f = *old_fds++;
- if (f) {
- get_file(f);
- } else {
- /*
- * The fd may be claimed in the fd bitmap but not yet
- * instantiated in the files array if a sibling thread
- * is partway through open(). So make sure that this
- * fd is available to the new process.
- */
- FD_CLR(open_files - i, new_fdt->open_fds);
- }
- rcu_assign_pointer(*new_fds++, f);
- }
- spin_unlock(&oldf->file_lock);
-
- /* compute the remainder to be cleared */
- size = (new_fdt->max_fds - open_files) * sizeof(struct file *);
-
- /* This is long word aligned thus could use a optimized version */
- memset(new_fds, 0, size);
-
- if (new_fdt->max_fds > open_files) {
- int left = (new_fdt->max_fds-open_files)/8;
- int start = open_files / (8 * sizeof(unsigned long));
-
- memset(&new_fdt->open_fds->fds_bits[start], 0, left);
- memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
- }
-
- return newf;
-
-out_release:
- kmem_cache_free(files_cachep, newf);
-out:
- return NULL;
-}
-
static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
{
struct files_struct *oldf, *newf;
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <asm/system.h>
+#include <asm/unaligned.h>
static int kgdb_break_asap;
* GDB remote protocol parser:
*/
-static const char hexchars[] = "0123456789abcdef";
-
static int hex(char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
}
kgdb_io_ops->write_char('#');
- kgdb_io_ops->write_char(hexchars[checksum >> 4]);
- kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+ kgdb_io_ops->write_char(hex_asc_hi(checksum));
+ kgdb_io_ops->write_char(hex_asc_lo(checksum));
if (kgdb_io_ops->flush)
kgdb_io_ops->flush();
{
error = -error;
pkt[0] = 'E';
- pkt[1] = hexchars[(error / 10)];
- pkt[2] = hexchars[(error % 10)];
+ pkt[1] = hex_asc[(error / 10)];
+ pkt[2] = hex_asc[(error % 10)];
pkt[3] = '\0';
}
scan = (unsigned char *)id;
while (i--)
*scan++ = 0;
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
+ put_unaligned_be32(value, scan);
}
static struct task_struct *getthread(struct pt_regs *regs, int tid)
kobject_put(&mod->mkobj.kobj);
return err;
}
-#endif
+
+static void mod_sysfs_fini(struct module *mod)
+{
+ kobject_put(&mod->mkobj.kobj);
+}
+
+#else /* CONFIG_SYSFS */
+
+static void mod_sysfs_fini(struct module *mod)
+{
+}
+
+#endif /* CONFIG_SYSFS */
static void mod_kobject_remove(struct module *mod)
{
module_param_sysfs_remove(mod);
kobject_put(mod->mkobj.drivers_dir);
kobject_put(mod->holders_dir);
- kobject_put(&mod->mkobj.kobj);
+ mod_sysfs_fini(mod);
}
/*
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| hdr->e_type != ET_REL
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
ret = 0;
spliced = 0;
- while (len) {
+ while (len && !spliced) {
ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret);
if (ret < 0)
break;
static inline int rt_policy(int policy)
{
- if (unlikely(policy == SCHED_FIFO) || unlikely(policy == SCHED_RR))
+ if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
return 1;
return 0;
}
*/
struct list_head leaf_cfs_rq_list;
struct task_group *tg; /* group that "owns" this runqueue */
-
-#ifdef CONFIG_SMP
- unsigned long task_weight;
- unsigned long shares;
- /*
- * We need space to build a sched_domain wide view of the full task
- * group tree, in order to avoid depending on dynamic memory allocation
- * during the load balancing we place this in the per cpu task group
- * hierarchy. This limits the load balancing to one instance per cpu,
- * but more should not be needed anyway.
- */
- struct aggregate_struct {
- /*
- * load = weight(cpus) * f(tg)
- *
- * Where f(tg) is the recursive weight fraction assigned to
- * this group.
- */
- unsigned long load;
-
- /*
- * part of the group weight distributed to this span.
- */
- unsigned long shares;
-
- /*
- * The sum of all runqueue weights within this span.
- */
- unsigned long rq_weight;
-
- /*
- * Weight contributed by tasks; this is the part we can
- * influence by moving tasks around.
- */
- unsigned long task_weight;
- } aggregate;
-#endif
#endif
};
*/
#define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y))
-/*
- * delta *= weight / lw
- */
static unsigned long
calc_delta_mine(unsigned long delta_exec, unsigned long weight,
struct load_weight *lw)
return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX);
}
+static inline unsigned long
+calc_delta_fair(unsigned long delta_exec, struct load_weight *lw)
+{
+ return calc_delta_mine(delta_exec, NICE_0_LOAD, lw);
+}
+
static inline void update_load_add(struct load_weight *lw, unsigned long inc)
{
lw->weight += inc;
static unsigned long target_load(int cpu, int type);
static unsigned long cpu_avg_load_per_task(int cpu);
static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-
-/*
- * Group load balancing.
- *
- * We calculate a few balance domain wide aggregate numbers; load and weight.
- * Given the pictures below, and assuming each item has equal weight:
- *
- * root 1 - thread
- * / | \ A - group
- * A 1 B
- * /|\ / \
- * C 2 D 3 4
- * | |
- * 5 6
- *
- * load:
- * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd,
- * which equals 1/9-th of the total load.
- *
- * shares:
- * The weight of this group on the selected cpus.
- *
- * rq_weight:
- * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while
- * B would get 2.
- *
- * task_weight:
- * Part of the rq_weight contributed by tasks; all groups except B would
- * get 1, B gets 2.
- */
-
-static inline struct aggregate_struct *
-aggregate(struct task_group *tg, struct sched_domain *sd)
-{
- return &tg->cfs_rq[sd->first_cpu]->aggregate;
-}
-
-typedef void (*aggregate_func)(struct task_group *, struct sched_domain *);
-
-/*
- * Iterate the full tree, calling @down when first entering a node and @up when
- * leaving it for the final time.
- */
-static
-void aggregate_walk_tree(aggregate_func down, aggregate_func up,
- struct sched_domain *sd)
-{
- struct task_group *parent, *child;
-
- rcu_read_lock();
- parent = &root_task_group;
-down:
- (*down)(parent, sd);
- list_for_each_entry_rcu(child, &parent->children, siblings) {
- parent = child;
- goto down;
-
-up:
- continue;
- }
- (*up)(parent, sd);
-
- child = parent;
- parent = parent->parent;
- if (parent)
- goto up;
- rcu_read_unlock();
-}
-
-/*
- * Calculate the aggregate runqueue weight.
- */
-static
-void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long rq_weight = 0;
- unsigned long task_weight = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- rq_weight += tg->cfs_rq[i]->load.weight;
- task_weight += tg->cfs_rq[i]->task_weight;
- }
-
- aggregate(tg, sd)->rq_weight = rq_weight;
- aggregate(tg, sd)->task_weight = task_weight;
-}
-
-/*
- * Compute the weight of this group on the given cpus.
- */
-static
-void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span)
- shares += tg->cfs_rq[i]->shares;
-
- if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares)
- shares = tg->shares;
-
- aggregate(tg, sd)->shares = shares;
-}
-
-/*
- * Compute the load fraction assigned to this group, relies on the aggregate
- * weight and this group's parent's load, i.e. top-down.
- */
-static
-void aggregate_group_load(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long load;
-
- if (!tg->parent) {
- int i;
-
- load = 0;
- for_each_cpu_mask(i, sd->span)
- load += cpu_rq(i)->load.weight;
-
- } else {
- load = aggregate(tg->parent, sd)->load;
-
- /*
- * shares is our weight in the parent's rq so
- * shares/parent->rq_weight gives our fraction of the load
- */
- load *= aggregate(tg, sd)->shares;
- load /= aggregate(tg->parent, sd)->rq_weight + 1;
- }
-
- aggregate(tg, sd)->load = load;
-}
-
-static void __set_se_shares(struct sched_entity *se, unsigned long shares);
-
-/*
- * Calculate and set the cpu's group shares.
- */
-static void
-__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd,
- int tcpu)
-{
- int boost = 0;
- unsigned long shares;
- unsigned long rq_weight;
-
- if (!tg->se[tcpu])
- return;
-
- rq_weight = tg->cfs_rq[tcpu]->load.weight;
-
- /*
- * If there are currently no tasks on the cpu pretend there is one of
- * average load so that when a new task gets to run here it will not
- * get delayed by group starvation.
- */
- if (!rq_weight) {
- boost = 1;
- rq_weight = NICE_0_LOAD;
- }
-
- /*
- * \Sum shares * rq_weight
- * shares = -----------------------
- * \Sum rq_weight
- *
- */
- shares = aggregate(tg, sd)->shares * rq_weight;
- shares /= aggregate(tg, sd)->rq_weight + 1;
-
- /*
- * record the actual number of shares, not the boosted amount.
- */
- tg->cfs_rq[tcpu]->shares = boost ? 0 : shares;
-
- if (shares < MIN_SHARES)
- shares = MIN_SHARES;
- else if (shares > MAX_SHARES)
- shares = MAX_SHARES;
-
- __set_se_shares(tg->se[tcpu], shares);
-}
-
-/*
- * Re-adjust the weights on the cpu the task came from and on the cpu the
- * task went to.
- */
-static void
-__move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- unsigned long shares;
-
- shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
-
- __update_group_shares_cpu(tg, sd, scpu);
- __update_group_shares_cpu(tg, sd, dcpu);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
- if (shares)
- tg->cfs_rq[dcpu]->shares += shares;
-}
-
-/*
- * Because changing a group's shares changes the weight of the super-group
- * we need to walk up the tree and change all shares until we hit the root.
- */
-static void
-move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- while (tg) {
- __move_group_shares(tg, sd, scpu, dcpu);
- tg = tg->parent;
- }
-}
-
-static
-void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = aggregate(tg, sd)->shares;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- struct rq *rq = cpu_rq(i);
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __update_group_shares_cpu(tg, sd, i);
- spin_unlock_irqrestore(&rq->lock, flags);
- }
-
- aggregate_group_shares(tg, sd);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= aggregate(tg, sd)->shares;
- if (shares) {
- tg->cfs_rq[sd->first_cpu]->shares += shares;
- aggregate(tg, sd)->shares += shares;
- }
-}
-
-/*
- * Calculate the accumulative weight and recursive load of each task group
- * while walking down the tree.
- */
-static
-void aggregate_get_down(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_weight(tg, sd);
- aggregate_group_shares(tg, sd);
- aggregate_group_load(tg, sd);
-}
-
-/*
- * Rebalance the cpu shares while walking back up the tree.
- */
-static
-void aggregate_get_up(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_set_shares(tg, sd);
-}
-
-static DEFINE_PER_CPU(spinlock_t, aggregate_lock);
-
-static void __init init_aggregate(void)
-{
- int i;
-
- for_each_possible_cpu(i)
- spin_lock_init(&per_cpu(aggregate_lock, i));
-}
-
-static int get_aggregate(struct sched_domain *sd)
-{
- if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu)))
- return 0;
-
- aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd);
- return 1;
-}
-
-static void put_aggregate(struct sched_domain *sd)
-{
- spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu));
-}
-
-static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
-{
- cfs_rq->shares = shares;
-}
-
-#else
-
-static inline void init_aggregate(void)
-{
-}
-
-static inline int get_aggregate(struct sched_domain *sd)
-{
- return 0;
-}
-
-static inline void put_aggregate(struct sched_domain *sd)
-{
-}
-#endif
-
#else /* CONFIG_SMP */
#ifdef CONFIG_FAIR_GROUP_SCHED
#define sched_class_highest (&rt_sched_class)
-static void inc_nr_running(struct rq *rq)
+static inline void inc_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_add(&rq->load, p->se.load.weight);
+}
+
+static inline void dec_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_sub(&rq->load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running++;
+ inc_load(rq, p);
}
-static void dec_nr_running(struct rq *rq)
+static void dec_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running--;
+ dec_load(rq, p);
}
static void set_load_weight(struct task_struct *p)
rq->nr_uninterruptible--;
enqueue_task(rq, p, wakeup);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
/*
rq->nr_uninterruptible++;
dequeue_task(rq, p, sleep);
- dec_nr_running(rq);
+ dec_nr_running(p, rq);
}
/**
* management (if any):
*/
p->sched_class->task_new(rq, p);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
check_preempt_curr(rq, p);
#ifdef CONFIG_SMP
unsigned long imbalance;
struct rq *busiest;
unsigned long flags;
- int unlock_aggregate;
cpus_setall(*cpus);
- unlock_aggregate = get_aggregate(sd);
-
/*
* When power savings policy is enabled for the parent domain, idle
* sibling can pick up load irrespective of busy siblings. In this case,
if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
-
- goto out;
+ return -1;
+ return ld_moved;
out_balanced:
schedstat_inc(sd, lb_balanced[idle]);
if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
- else
- ld_moved = 0;
-out:
- if (unlock_aggregate)
- put_aggregate(sd);
- return ld_moved;
+ return -1;
+ return 0;
}
/*
* schedule() atomically, we ignore that path for now.
* Otherwise, whine if we are scheduling when we should not be.
*/
- if (unlikely(in_atomic_preempt_off()) && unlikely(!prev->exit_state))
+ if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
__schedule_bug(prev);
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
goto out_unlock;
}
on_rq = p->se.on_rq;
- if (on_rq)
+ if (on_rq) {
dequeue_task(rq, p, 0);
+ dec_load(rq, p);
+ }
p->static_prio = NICE_TO_PRIO(nice);
set_load_weight(p);
if (on_rq) {
enqueue_task(rq, p, 0);
+ inc_load(rq, p);
/*
* If the task increased its priority or is running and
* lowered its priority, then reschedule its CPU:
SD_INIT(sd, ALLNODES);
set_domain_attribute(sd, attr);
sd->span = *cpu_map;
- sd->first_cpu = first_cpu(sd->span);
cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
p = sd;
sd_allnodes = 1;
SD_INIT(sd, NODE);
set_domain_attribute(sd, attr);
sched_domain_node_span(cpu_to_node(i), &sd->span);
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
SD_INIT(sd, CPU);
set_domain_attribute(sd, attr);
sd->span = *nodemask;
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
SD_INIT(sd, MC);
set_domain_attribute(sd, attr);
sd->span = cpu_coregroup_map(i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
SD_INIT(sd, SIBLING);
set_domain_attribute(sd, attr);
sd->span = per_cpu(cpu_sibling_map, i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
static cpumask_t *doms_cur; /* current sched domains */
static int ndoms_cur; /* number of sched domains in 'doms_cur' */
-static struct sched_domain_attr *dattr_cur; /* attribues of custom domains
- in 'doms_cur' */
+static struct sched_domain_attr *dattr_cur;
+ /* attribues of custom domains in 'doms_cur' */
/*
* Special case: If a kmalloc of a doms_cur partition (array of
}
#ifdef CONFIG_SMP
- init_aggregate();
init_defrootdomain();
#endif
#endif
#ifdef CONFIG_FAIR_GROUP_SCHED
-static void __set_se_shares(struct sched_entity *se, unsigned long shares)
+static void set_se_shares(struct sched_entity *se, unsigned long shares)
{
struct cfs_rq *cfs_rq = se->cfs_rq;
+ struct rq *rq = cfs_rq->rq;
int on_rq;
+ spin_lock_irq(&rq->lock);
+
on_rq = se->on_rq;
if (on_rq)
dequeue_entity(cfs_rq, se, 0);
if (on_rq)
enqueue_entity(cfs_rq, se, 0);
-}
-static void set_se_shares(struct sched_entity *se, unsigned long shares)
-{
- struct cfs_rq *cfs_rq = se->cfs_rq;
- struct rq *rq = cfs_rq->rq;
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __set_se_shares(se, shares);
- spin_unlock_irqrestore(&rq->lock, flags);
+ spin_unlock_irq(&rq->lock);
}
static DEFINE_MUTEX(shares_mutex);
* w/o tripping rebalance_share or load_balance_fair.
*/
tg->shares = shares;
- for_each_possible_cpu(i) {
- /*
- * force a rebalance
- */
- cfs_rq_set_shares(tg->cfs_rq[i], 0);
+ for_each_possible_cpu(i)
set_se_shares(tg->se[i], shares);
- }
/*
* Enable load balance activity on this group, by inserting it back on
return &per_cpu(sched_clock_data, cpu);
}
+static __read_mostly int sched_clock_running;
+
void sched_clock_init(void)
{
u64 ktime_now = ktime_to_ns(ktime_get());
- u64 now = 0;
+ unsigned long now_jiffies = jiffies;
int cpu;
for_each_possible_cpu(cpu) {
struct sched_clock_data *scd = cpu_sdc(cpu);
scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
- scd->prev_jiffies = jiffies;
- scd->prev_raw = now;
- scd->tick_raw = now;
+ scd->prev_jiffies = now_jiffies;
+ scd->prev_raw = 0;
+ scd->tick_raw = 0;
scd->tick_gtod = ktime_now;
scd->clock = ktime_now;
}
+
+ sched_clock_running = 1;
}
/*
struct sched_clock_data *scd = cpu_sdc(cpu);
u64 now, clock;
+ if (unlikely(!sched_clock_running))
+ return 0ull;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
struct sched_clock_data *scd = this_scd();
u64 now, now_gtod;
+ if (unlikely(!sched_clock_running))
+ return;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
#endif
SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over",
cfs_rq->nr_spread_over);
-#ifdef CONFIG_FAIR_GROUP_SCHED
-#ifdef CONFIG_SMP
- SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares);
-#endif
-#endif
}
static void print_cpu(struct seq_file *m, int cpu)
}
#endif
-/*
- * delta *= w / rw
- */
-static inline unsigned long
-calc_delta_weight(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- se->load.weight, &cfs_rq_of(se)->load);
- }
-
- return delta;
-}
-
-/*
- * delta *= rw / w
- */
-static inline unsigned long
-calc_delta_fair(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, &se->load);
- }
-
- return delta;
-}
-
/*
* The idea is to set a period in which each task runs once.
*
*/
static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
- return calc_delta_weight(__sched_period(cfs_rq->nr_running), se);
+ u64 slice = __sched_period(cfs_rq->nr_running);
+
+ for_each_sched_entity(se) {
+ cfs_rq = cfs_rq_of(se);
+
+ slice *= se->load.weight;
+ do_div(slice, cfs_rq->load.weight);
+ }
+
+
+ return slice;
}
/*
* We calculate the vruntime slice of a to be inserted task
*
- * vs = s*rw/w = p
+ * vs = s/w = p/rw
*/
static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
unsigned long nr_running = cfs_rq->nr_running;
+ unsigned long weight;
+ u64 vslice;
if (!se->on_rq)
nr_running++;
- return __sched_period(nr_running);
-}
-
-/*
- * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in
- * that it favours >=0 over <0.
- *
- * -20 |
- * |
- * 0 --------+-------
- * .'
- * 19 .'
- *
- */
-static unsigned long
-calc_delta_asym(unsigned long delta, struct sched_entity *se)
-{
- struct load_weight lw = {
- .weight = NICE_0_LOAD,
- .inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT)
- };
+ vslice = __sched_period(nr_running);
for_each_sched_entity(se) {
- struct load_weight *se_lw = &se->load;
+ cfs_rq = cfs_rq_of(se);
- if (se->load.weight < NICE_0_LOAD)
- se_lw = &lw;
+ weight = cfs_rq->load.weight;
+ if (!se->on_rq)
+ weight += se->load.weight;
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, se_lw);
+ vslice *= NICE_0_LOAD;
+ do_div(vslice, weight);
}
- return delta;
+ return vslice;
}
/*
curr->sum_exec_runtime += delta_exec;
schedstat_add(cfs_rq, exec_clock, delta_exec);
- delta_exec_weighted = calc_delta_fair(delta_exec, curr);
+ delta_exec_weighted = delta_exec;
+ if (unlikely(curr->load.weight != NICE_0_LOAD)) {
+ delta_exec_weighted = calc_delta_fair(delta_exec_weighted,
+ &curr->load);
+ }
curr->vruntime += delta_exec_weighted;
}
* Scheduling class queueing methods:
*/
-#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
-static void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
- cfs_rq->task_weight += weight;
-}
-#else
-static inline void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
-}
-#endif
-
static void
account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_add(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- inc_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, se->load.weight);
cfs_rq->nr_running++;
se->on_rq = 1;
list_add(&se->group_node, &cfs_rq->tasks);
account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_sub(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- dec_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, -se->load.weight);
cfs_rq->nr_running--;
se->on_rq = 0;
list_del_init(&se->group_node);
if (!initial) {
/* sleeps upto a single latency don't count. */
- if (sched_feat(NEW_FAIR_SLEEPERS)) {
- unsigned long thresh = sysctl_sched_latency;
-
- /*
- * convert the sleeper threshold into virtual time
- */
- if (sched_feat(NORMALIZED_SLEEPER))
- thresh = calc_delta_fair(thresh, se);
-
- vruntime -= thresh;
- }
+ if (sched_feat(NEW_FAIR_SLEEPERS))
+ vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
struct task_struct *curr = this_rq->curr;
unsigned long tl = this_load;
unsigned long tl_per_task;
+ int balanced;
- if (!(this_sd->flags & SD_WAKE_AFFINE))
+ if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
return 0;
+ /*
+ * If sync wakeup then subtract the (maximum possible)
+ * effect of the currently running task from the load
+ * of the current CPU:
+ */
+ if (sync)
+ tl -= current->se.load.weight;
+
+ balanced = 100*(tl + p->se.load.weight) <= imbalance*load;
+
/*
* If the currently running task will sleep within
* a reasonable amount of time then attract this newly
* woken task:
*/
- if (sync && curr->sched_class == &fair_sched_class) {
+ if (sync && balanced && curr->sched_class == &fair_sched_class) {
if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
p->se.avg_overlap < sysctl_sched_migration_cost)
return 1;
schedstat_inc(p, se.nr_wakeups_affine_attempts);
tl_per_task = cpu_avg_load_per_task(this_cpu);
- /*
- * If sync wakeup then subtract the (maximum possible)
- * effect of the currently running task from the load
- * of the current CPU:
- */
- if (sync)
- tl -= current->se.load.weight;
-
if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) ||
- 100*(tl + p->se.load.weight) <= imbalance*load) {
+ balanced) {
/*
* This domain has SD_WAKE_AFFINE and
* p is cache cold in this domain, and
unsigned long gran = sysctl_sched_wakeup_granularity;
/*
- * More easily preempt - nice tasks, while not making it harder for
- * + nice tasks.
+ * More easily preempt - nice tasks, while not making
+ * it harder for + nice tasks.
*/
- gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se);
+ if (unlikely(se->load.weight > NICE_0_LOAD))
+ gran = calc_delta_fair(gran, &se->load);
return gran;
}
return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator);
}
-static unsigned long
-__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move, struct sched_domain *sd,
- enum cpu_idle_type idle, int *all_pinned, int *this_best_prio,
- struct cfs_rq *cfs_rq)
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static int cfs_rq_best_prio(struct cfs_rq *cfs_rq)
{
- struct rq_iterator cfs_rq_iterator;
+ struct sched_entity *curr;
+ struct task_struct *p;
- cfs_rq_iterator.start = load_balance_start_fair;
- cfs_rq_iterator.next = load_balance_next_fair;
- cfs_rq_iterator.arg = cfs_rq;
+ if (!cfs_rq->nr_running || !first_fair(cfs_rq))
+ return MAX_PRIO;
+
+ curr = cfs_rq->curr;
+ if (!curr)
+ curr = __pick_next_entity(cfs_rq);
+
+ p = task_of(curr);
- return balance_tasks(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &cfs_rq_iterator);
+ return p->prio;
}
+#endif
-#ifdef CONFIG_FAIR_GROUP_SCHED
static unsigned long
load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
int *all_pinned, int *this_best_prio)
{
+ struct cfs_rq *busy_cfs_rq;
long rem_load_move = max_load_move;
- int busiest_cpu = cpu_of(busiest);
- struct task_group *tg;
-
- rcu_read_lock();
- list_for_each_entry(tg, &task_groups, list) {
- long imbalance;
- unsigned long this_weight, busiest_weight;
- long rem_load, max_load, moved_load;
-
- /*
- * empty group
- */
- if (!aggregate(tg, sd)->task_weight)
- continue;
-
- rem_load = rem_load_move * aggregate(tg, sd)->rq_weight;
- rem_load /= aggregate(tg, sd)->load + 1;
-
- this_weight = tg->cfs_rq[this_cpu]->task_weight;
- busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight;
+ struct rq_iterator cfs_rq_iterator;
- imbalance = (busiest_weight - this_weight) / 2;
+ cfs_rq_iterator.start = load_balance_start_fair;
+ cfs_rq_iterator.next = load_balance_next_fair;
- if (imbalance < 0)
- imbalance = busiest_weight;
+ for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
+#ifdef CONFIG_FAIR_GROUP_SCHED
+ struct cfs_rq *this_cfs_rq;
+ long imbalance;
+ unsigned long maxload;
- max_load = max(rem_load, imbalance);
- moved_load = __load_balance_fair(this_rq, this_cpu, busiest,
- max_load, sd, idle, all_pinned, this_best_prio,
- tg->cfs_rq[busiest_cpu]);
+ this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu);
- if (!moved_load)
+ imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight;
+ /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */
+ if (imbalance <= 0)
continue;
- move_group_shares(tg, sd, busiest_cpu, this_cpu);
+ /* Don't pull more than imbalance/2 */
+ imbalance /= 2;
+ maxload = min(rem_load_move, imbalance);
- moved_load *= aggregate(tg, sd)->load;
- moved_load /= aggregate(tg, sd)->rq_weight + 1;
+ *this_best_prio = cfs_rq_best_prio(this_cfs_rq);
+#else
+# define maxload rem_load_move
+#endif
+ /*
+ * pass busy_cfs_rq argument into
+ * load_balance_[start|next]_fair iterators
+ */
+ cfs_rq_iterator.arg = busy_cfs_rq;
+ rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
+ maxload, sd, idle, all_pinned,
+ this_best_prio,
+ &cfs_rq_iterator);
- rem_load_move -= moved_load;
- if (rem_load_move < 0)
+ if (rem_load_move <= 0)
break;
}
- rcu_read_unlock();
return max_load_move - rem_load_move;
}
-#else
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
-{
- return __load_balance_fair(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &busiest->cfs);
-}
-#endif
static int
move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
*/
for_each_sched_rt_entity(rt_se)
enqueue_rt_entity(rt_se);
-
- inc_cpu_load(rq, p->se.load.weight);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
if (rt_rq && rt_rq->rt_nr_running)
enqueue_rt_entity(rt_se);
}
-
- dec_cpu_load(rq, p->se.load.weight);
}
/*
preempt_enable();
#endif
}
+ kfree(mask_str);
return 0;
}
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
+static void __flush_itimer_signals(struct sigpending *pending)
+{
+ sigset_t signal, retain;
+ struct sigqueue *q, *n;
+
+ signal = pending->signal;
+ sigemptyset(&retain);
+
+ list_for_each_entry_safe(q, n, &pending->list, list) {
+ int sig = q->info.si_signo;
+
+ if (likely(q->info.si_code != SI_TIMER)) {
+ sigaddset(&retain, sig);
+ } else {
+ sigdelset(&signal, sig);
+ list_del_init(&q->list);
+ __sigqueue_free(q);
+ }
+ }
+
+ sigorsets(&pending->signal, &signal, &retain);
+}
+
+void flush_itimer_signals(void)
+{
+ struct task_struct *tsk = current;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tsk->sighand->siglock, flags);
+ __flush_itimer_signals(&tsk->pending);
+ __flush_itimer_signals(&tsk->signal->shared_pending);
+ spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+}
+
void ignore_signals(struct task_struct *t)
{
int i;
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
/*
- * If the signal is still pending remove it from the
- * pending queue. We must hold ->siglock while testing
- * q->list to serialize with collect_signal().
+ * We must hold ->siglock while testing q->list
+ * to serialize with collect_signal() or with
+ * __exit_signal()->flush_sigqueue().
*/
spin_lock_irqsave(lock, flags);
+ q->flags &= ~SIGQUEUE_PREALLOC;
+ /*
+ * If it is queued it will be freed when dequeued,
+ * like the "regular" sigqueue.
+ */
if (!list_empty(&q->list))
- list_del_init(&q->list);
+ q = NULL;
spin_unlock_irqrestore(lock, flags);
- q->flags &= ~SIGQUEUE_PREALLOC;
- __sigqueue_free(q);
+ if (q)
+ __sigqueue_free(q);
}
int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
* help our sisters onto their CPUs. */
if (!prepared && !irqs_disabled)
yield();
- else
- cpu_relax();
+ cpu_relax();
}
/* Ack: we are exiting. */
}
/* Wait for them all to come to life. */
- while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
+ while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
yield();
+ cpu_relax();
+ }
/* If some failed, kill them all. */
if (ret < 0) {
asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
- long uninitialized_var(error);
+ long error = 0;
if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
return error;
error = PR_TIMING_STATISTICAL;
break;
case PR_SET_TIMING:
- if (arg2 == PR_TIMING_STATISTICAL)
- error = 0;
- else
+ if (arg2 != PR_TIMING_STATISTICAL)
error = -EINVAL;
break;
extern int maps_protect;
extern int sysctl_stat_interval;
extern int latencytop_enabled;
+extern int sysctl_nr_open_min, sysctl_nr_open_max;
/* Constants used for minimum and maximum */
#if defined(CONFIG_DETECT_SOFTLOCKUP) || defined(CONFIG_HIGHMEM)
.data = &sysctl_nr_open,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &sysctl_nr_open_min,
+ .extra2 = &sysctl_nr_open_max,
},
{
.ctl_name = FS_DENTRY,
};
EXPORT_SYMBOL_GPL(byte_rev_table);
-static __always_inline u16 bitrev16(u16 x)
+u16 bitrev16(u16 x)
{
return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
}
+EXPORT_SYMBOL(bitrev16);
/**
* bitrev32 - reverse the order of bits in a u32 value
}
pr_info(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- pr_info(" reserved.size = 0x%lx\n", lmb.reserved.size);
+ pr_info(" reserved.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
pr_info(" reserved.region[0x%lx].base = 0x%llx\n",
i, (unsigned long long)lmb.reserved.region[i].base);
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
- char *name;
va_list args;
int ret = 0;
struct device *dev;
va_start(args, fmt);
- name = kvasprintf(GFP_KERNEL, fmt, args);
+ dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
-
- if (!name)
- return -ENOMEM;
-
- dev = device_create(bdi_class, parent, MKDEV(0, 0), name);
if (IS_ERR(dev)) {
ret = PTR_ERR(dev);
goto exit;
}
bdi->dev = dev;
- dev_set_drvdata(bdi->dev, bdi);
- bdi_debug_register(bdi, name);
+ bdi_debug_register(bdi, dev_name(dev));
exit:
- kfree(name);
return ret;
}
EXPORT_SYMBOL(bdi_register);
continue;
spin_lock(&dst->page_table_lock);
- spin_lock(&src->page_table_lock);
+ spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING);
if (!huge_pte_none(huge_ptep_get(src_pte))) {
if (cow)
huge_ptep_set_wrprotect(src, addr, src_pte);
vmf.flags = flags;
vmf.page = NULL;
- BUG_ON(vma->vm_flags & VM_PFNMAP);
-
ret = vma->vm_ops->fault(vma, &vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
/*
* Check that a process has enough memory to allocate a new virtual
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
unsigned long rlim, retval;
unsigned long newbrk, oldbrk;
struct mm_struct *mm = current->mm;
+ unsigned long min_brk;
down_write(&mm->mmap_sem);
- if (brk < mm->start_brk)
+#ifdef CONFIG_COMPAT_BRK
+ min_brk = mm->end_code;
+#else
+ min_brk = mm->start_brk;
+#endif
+ if (brk < min_brk)
goto out;
/*
unsigned long max_mapnr;
unsigned long num_physpages;
unsigned long askedalloc, realalloc;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
unsigned int kobjsize(const void *objp)
{
struct page *page;
+ int order = 0;
/*
* If the object we have should not have ksize performed on it,
* return size of 0
*/
- if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp))))
+ if (!objp)
return 0;
+ if ((unsigned long)objp >= memory_end)
+ return 0;
+
+ page = virt_to_head_page(objp);
+ if (!page)
+ return 0;
+
+ /*
+ * If the allocator sets PageSlab, we know the pointer came from
+ * kmalloc().
+ */
if (PageSlab(page))
return ksize(objp);
- BUG_ON(page->index < 0);
- BUG_ON(page->index >= MAX_ORDER);
+ /*
+ * The ksize() function is only guaranteed to work for pointers
+ * returned by kmalloc(). So handle arbitrary pointers, that we expect
+ * always to be compound pages, here.
+ */
+ if (PageCompound(page))
+ order = compound_order(page);
- return (PAGE_SIZE << page->index);
+ /*
+ * Finally, handle arbitrary pointers that don't set PageSlab.
+ * Default to 0-order in the case when we're unable to ksize()
+ * the object.
+ */
+ return PAGE_SIZE << order;
}
/*
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
KERN_EMERG "Backtrace:\n");
dump_stack();
- page->flags &= ~(1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_reclaim |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_buddy );
+ page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD;
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_FREE)))
bad_page(page);
if (PageDirty(page))
__ClearPageDirty(page);
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_PREP)))
bad_page(page);
/*
(void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
&preferred_zone);
+ if (!preferred_zone)
+ return NULL;
+
classzone_idx = zone_idx(preferred_zone);
zonelist_scan:
alloc_size = zone->wait_table_hash_nr_entries
* sizeof(wait_queue_head_t);
- if (system_state == SYSTEM_BOOTING) {
+ if (!slab_is_available()) {
zone->wait_table = (wait_queue_head_t *)
alloc_bootmem_node(pgdat, alloc_size);
} else {
* is used by this zone for memmap. This affects the watermark
* and per-cpu initialisations
*/
- memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT;
+ memmap_pages =
+ PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT;
if (realsize >= memmap_pages) {
realsize -= memmap_pages;
printk(KERN_DEBUG
return ZERO_SIZE_PTR;
m = slob_alloc(size + align, gfp, align, node);
- if (m)
- *m = size;
+ if (!m)
+ return NULL;
+ *m = size;
return (void *)m + align;
} else {
void *ret;
page = virt_to_head_page(object);
- if (unlikely(!PageSlab(page)))
+ if (unlikely(!PageSlab(page))) {
+ WARN_ON(!PageCompound(page));
return PAGE_SIZE << compound_order(page);
-
+ }
s = page->slab;
#ifdef CONFIG_SLUB_DEBUG
local = &__get_cpu_var(committed_space);
*local += pages;
if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_add(*local, &vm_committed_space);
+ atomic_long_add(*local, &vm_committed_space);
*local = 0;
}
preempt_enable();
committed = &per_cpu(committed_space, (long)hcpu);
if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_add(*committed, &vm_committed_space);
+ atomic_long_add(*committed, &vm_committed_space);
*committed = 0;
drain_cpu_pagevecs((long)hcpu);
}
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void vlan_transfer_features(struct net_device *dev,
+ struct net_device *vlandev)
+{
+ unsigned long old_features = vlandev->features;
+
+ vlandev->features &= ~dev->vlan_features;
+ vlandev->features |= dev->features & dev->vlan_features;
+
+ if (old_features != vlandev->features)
+ netdev_features_change(vlandev);
+}
+
static void __vlan_device_event(struct net_device *dev, unsigned long event)
{
switch (event) {
int i, flgs;
struct net_device *vlandev;
- if (is_vlan_dev(dev)) {
+ if (is_vlan_dev(dev))
__vlan_device_event(dev, event);
- goto out;
- }
grp = __vlan_find_group(dev);
if (!grp)
}
break;
+ case NETDEV_FEAT_CHANGE:
+ /* Propagate device features to underlying device */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ vlan_transfer_features(dev, vlandev);
+ }
+
+ break;
+
case NETDEV_DOWN:
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
+ dev->features |= real_dev->features & real_dev->vlan_features;
+
/* ipv6 shared card related stuff */
dev->dev_id = real_dev->dev_id;
void ax25_requeue_frames(ax25_cb *ax25)
{
- struct sk_buff *skb, *skb_prev = NULL;
+ struct sk_buff *skb;
/*
* Requeue all the un-ack-ed frames on the output queue to be picked
* up by ax25_kick called from the timer. This arrangement handles the
* possibility of an empty output queue.
*/
- while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) {
- if (skb_prev == NULL)
- skb_queue_head(&ax25->write_queue, skb);
- else
- skb_append(skb_prev, skb, &ax25->write_queue);
- skb_prev = skb;
- }
+ while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL)
+ skb_queue_head(&ax25->write_queue, skb);
}
/*
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- rfcomm_dlc_unlock(d);
d->state_change(d, err);
+ rfcomm_dlc_unlock(d);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
if (dlc->state == BT_CLOSED) {
if (!dev->tty) {
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
- if (rfcomm_dev_get(dev->id) == NULL)
+ /* Drop DLC lock here to avoid deadlock
+ * 1. rfcomm_dev_get will take rfcomm_dev_lock
+ * but in rfcomm_dev_add there's lock order:
+ * rfcomm_dev_lock -> dlc lock
+ * 2. rfcomm_dev_put will deadlock if it's
+ * the last reference
+ */
+ rfcomm_dlc_unlock(dlc);
+ if (rfcomm_dev_get(dev->id) == NULL) {
+ rfcomm_dlc_lock(dlc);
return;
+ }
rfcomm_dev_del(dev);
rfcomm_dev_put(dev);
+ rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
strlcpy(dev->name, newname, IFNAMSIZ);
rollback:
- device_rename(&dev->dev, dev->name);
+ err = device_rename(&dev->dev, dev->name);
+ if (err) {
+ memcpy(dev->name, oldname, IFNAMSIZ);
+ return err;
+ }
write_lock_bh(&dev_base_lock);
hlist_del(&dev->name_hlist);
* Load in the correct multicast list now the flags have changed.
*/
- if (dev->change_rx_flags && (dev->flags ^ flags) & IFF_MULTICAST)
+ if (dev->change_rx_flags && (old_flags ^ flags) & IFF_MULTICAST)
dev->change_rx_flags(dev, IFF_MULTICAST);
dev_set_rx_mode(dev);
return nla_nest_end(skb, nest);
nla_put_failure:
- return nla_nest_cancel(skb, nest);
+ nla_nest_cancel(skb, nest);
+ return -EMSGSIZE;
}
static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
goto nla_put_failure;
}
- ci.ndm_used = now - neigh->used;
- ci.ndm_confirmed = now - neigh->confirmed;
- ci.ndm_updated = now - neigh->updated;
+ ci.ndm_used = jiffies_to_clock_t(now - neigh->used);
+ ci.ndm_confirmed = jiffies_to_clock_t(now - neigh->confirmed);
+ ci.ndm_updated = jiffies_to_clock_t(now - neigh->updated);
ci.ndm_refcnt = atomic_read(&neigh->refcnt) - 1;
read_unlock_bh(&neigh->lock);
int cpu;
wait_queue_head_t queue;
+ struct completion start_done;
};
#define REMOVE 1
BUG_ON(smp_processor_id() != cpu);
init_waitqueue_head(&t->queue);
+ complete(&t->start_done);
pr_debug("pktgen: starting pktgen/%d: pid=%d\n", cpu, task_pid_nr(current));
INIT_LIST_HEAD(&t->if_list);
list_add_tail(&t->th_list, &pktgen_threads);
+ init_completion(&t->start_done);
p = kthread_create(pktgen_thread_worker, t, "kpktgend_%d", cpu);
if (IS_ERR(p)) {
}
wake_up_process(p);
+ wait_for_completion(&t->start_done);
return 0;
}
return nla_nest_end(skb, mx);
nla_put_failure:
- return nla_nest_cancel(skb, mx);
+ nla_nest_cancel(skb, mx);
+ return -EMSGSIZE;
}
int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
if (spd.nr_pages) {
int ret;
+ struct sock *sk = __skb->sk;
/*
* Drop the socket lock, otherwise we have reverse
* we call into ->sendpage() with the i_mutex lock held
* and networking will grab the socket lock.
*/
- release_sock(__skb->sk);
+ release_sock(sk);
ret = splice_to_pipe(pipe, &spd);
- lock_sock(__skb->sk);
+ lock_sock(sk);
return ret;
}
end = start + skb_shinfo(skb)->frags[i].size;
copy = end - offset;
- if ((copy = end - offset) > 0) {
+ if (copy > 0) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
struct page *page = frag->page;
/*
* Update Window Counter using the algorithm from [RFC 4342, 8.1].
- * The algorithm is not applicable if RTT < 4 microseconds.
+ * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
*/
static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
ktime_t now)
{
- u32 quarter_rtts;
-
- if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */
- return;
-
- quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
- quarter_rtts /= hctx->ccid3hctx_rtt / 4;
+ u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
+ quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
if (quarter_rtts > 0) {
hctx->ccid3hctx_t_last_win_count = now;
- hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5);
+ hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U);
hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */
}
}
* If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
* has short sequence numbers), drop packet and return
*/
- if (dh->dccph_type >= DCCP_PKT_DATA &&
- dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0) {
+ if ((dh->dccph_type < DCCP_PKT_DATA ||
+ dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) {
DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n",
dccp_packet_name(dh->dccph_type));
return 1;
struct neighbour *n)
{
char hbuffer[HBUFFERLEN];
- const char hexbuf[] = "0123456789ABCDEF";
int k, j;
char tbuf[16];
struct net_device *dev = n->dev;
else {
#endif
for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
- hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
- hbuffer[k++] = hexbuf[n->ha[j] & 15];
+ hbuffer[k++] = hex_asc_hi(n->ha[j]);
+ hbuffer[k++] = hex_asc_lo(n->ha[j]);
hbuffer[k++] = ':';
}
hbuffer[--k] = 0;
[IFA_LOCAL] = { .type = NLA_U32 },
[IFA_ADDRESS] = { .type = NLA_U32 },
[IFA_BROADCAST] = { .type = NLA_U32 },
- [IFA_ANYCAST] = { .type = NLA_U32 },
[IFA_LABEL] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 },
};
if (tb[IFA_BROADCAST])
ifa->ifa_broadcast = nla_get_be32(tb[IFA_BROADCAST]);
- if (tb[IFA_ANYCAST])
- ifa->ifa_anycast = nla_get_be32(tb[IFA_ANYCAST]);
-
if (tb[IFA_LABEL])
nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ);
else
break;
inet_del_ifa(in_dev, ifap, 0);
ifa->ifa_broadcast = 0;
- ifa->ifa_anycast = 0;
ifa->ifa_scope = 0;
}
+ nla_total_size(4) /* IFA_ADDRESS */
+ nla_total_size(4) /* IFA_LOCAL */
+ nla_total_size(4) /* IFA_BROADCAST */
- + nla_total_size(4) /* IFA_ANYCAST */
+ nla_total_size(IFNAMSIZ); /* IFA_LABEL */
}
if (ifa->ifa_broadcast)
NLA_PUT_BE32(skb, IFA_BROADCAST, ifa->ifa_broadcast);
- if (ifa->ifa_anycast)
- NLA_PUT_BE32(skb, IFA_ANYCAST, ifa->ifa_anycast);
-
if (ifa->ifa_label[0])
NLA_PUT_STRING(skb, IFA_LABEL, ifa->ifa_label);
[RTA_PREFSRC] = { .type = NLA_U32 },
[RTA_METRICS] = { .type = NLA_NESTED },
[RTA_MULTIPATH] = { .len = sizeof(struct rtnexthop) },
- [RTA_PROTOINFO] = { .type = NLA_U32 },
[RTA_FLOW] = { .type = NLA_U32 },
};
static void ipgre_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
out:
read_unlock(&ipgre_lock);
return;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- struct iphdr *eiph;
- __be16 *p = (__be16*)(dp+(iph->ihl<<2));
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- __be16 flags;
- int grehlen = (iph->ihl<<2) + 4;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (p[1] != htons(ETH_P_IP))
- return;
-
- flags = p[0];
- if (flags&(GRE_CSUM|GRE_KEY|GRE_SEQ|GRE_ROUTING|GRE_VERSION)) {
- if (flags&(GRE_VERSION|GRE_ROUTING))
- return;
- if (flags&GRE_CSUM)
- grehlen += 4;
- if (flags&GRE_KEY)
- grehlen += 4;
- if (flags&GRE_SEQ)
- grehlen += 4;
- }
- if (len < grehlen + sizeof(struct iphdr))
- return;
- eiph = (struct iphdr*)(dp + grehlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < (iph->ihl<<2))
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- n -= grehlen;
- rel_info = htonl(n << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < grehlen+68)
- return;
- n -= grehlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_dst = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_GRE;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_dst = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_IPGRE) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_IPGRE) {
- kfree_skb(skb2);
- return;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
-#endif
}
static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
static int ipip_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
out:
read_unlock(&ipip_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct iphdr *eiph;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (len < hlen + sizeof(struct iphdr))
- return 0;
- eiph = (struct iphdr*)(dp + hlen);
-
- switch (type) {
- default:
- return 0;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < hlen)
- return 0;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- rel_info = htonl((n - hlen) << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return 0;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < hlen+68)
- return 0;
- n -= hlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return 0;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return 0;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_daddr = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_IPIP;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &key)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_daddr = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_TUNNEL) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return 0;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_TUNNEL) {
- kfree_skb(skb2);
- return 0;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip_ecn_decapsulate(const struct iphdr *outer_iph,
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL) {
if (net_ratelimit())
sk_common_release(sk);
}
+static int raw_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip_flush_pending_frames(sk);
+ release_sock(sk);
+ return 0;
+}
+
/* This gets rid of all the nasties in af_inet. -DaveM */
static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
.name = "RAW",
.owner = THIS_MODULE,
.close = raw_close,
+ .destroy = raw_destroy,
.connect = ip4_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = raw_ioctl,
.negative_advice = ipv4_negative_advice,
.link_failure = ipv4_link_failure,
.update_pmtu = ip_rt_update_pmtu,
- .local_out = ip_local_out,
+ .local_out = __ip_local_out,
.entry_size = sizeof(struct rtable),
.entries = ATOMIC_INIT(0),
};
if (err)
flags |= RTCF_DIRECTSRC;
- if (out_dev == in_dev && err && !(flags & RTCF_MASQ) &&
+ if (out_dev == in_dev && err &&
(IN_DEV_SHARED_MEDIA(out_dev) ||
inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
flags |= RTCF_DOREDIRECT;
copied += used;
offset += used;
}
- if (offset != skb->len)
+ /*
+ * If recv_actor drops the lock (e.g. TCP splice
+ * receive) the skb pointer might be invalid when
+ * getting here: tcp_collapse might have deleted it
+ * while aggregating skbs from the socket queue.
+ */
+ skb = tcp_recv_skb(sk, seq-1, &offset);
+ if (!skb || (offset+1 != skb->len))
break;
}
if (tcp_hdr(skb)->fin) {
if (before(next_dup->start_seq, skip_to_seq)) {
skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count);
- tcp_sacktag_walk(skb, sk, NULL,
- next_dup->start_seq, next_dup->end_seq,
- 1, fack_count, reord, flag);
+ skb = tcp_sacktag_walk(skb, sk, NULL,
+ next_dup->start_seq, next_dup->end_seq,
+ 1, fack_count, reord, flag);
}
return skb;
tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
}
+static void tcp_try_keep_open(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ int state = TCP_CA_Open;
+
+ if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
+ state = TCP_CA_Disorder;
+
+ if (inet_csk(sk)->icsk_ca_state != state) {
+ tcp_set_ca_state(sk, state);
+ tp->high_seq = tp->snd_nxt;
+ }
+}
+
static void tcp_try_to_open(struct sock *sk, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp_enter_cwr(sk, 1);
if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) {
- int state = TCP_CA_Open;
-
- if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
- state = TCP_CA_Disorder;
-
- if (inet_csk(sk)->icsk_ca_state != state) {
- tcp_set_ca_state(sk, state);
- tp->high_seq = tp->snd_nxt;
- }
+ tcp_try_keep_open(sk);
tcp_moderate_cwnd(tp);
} else {
tcp_cwnd_down(sk, flag);
return 1;
old_ack:
- if (TCP_SKB_CB(skb)->sacked)
+ if (TCP_SKB_CB(skb)->sacked) {
tcp_sacktag_write_queue(sk, skb, prior_snd_una);
+ if (icsk->icsk_ca_state == TCP_CA_Open)
+ tcp_try_keep_open(sk);
+ }
uninteresting_ack:
SOCK_DEBUG(sk, "Ack %u out of %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
- unsigned int cur_mss = tcp_current_mss(sk, 0);
+ unsigned int cur_mss;
int err;
/* Inconslusive MTU probe */
return -ENOMEM;
}
+ if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
+ return -EHOSTUNREACH; /* Routing failure or similar. */
+
+ cur_mss = tcp_current_mss(sk, 0);
+
/* If receiver has shrunk his window, and skb is out of
* new window, do not retransmit it. The exception is the
* case, when window is shrunk to zero. In this case
(sysctl_tcp_retrans_collapse != 0))
tcp_retrans_try_collapse(sk, skb, cur_mss);
- if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
- return -EHOSTUNREACH; /* Routing failure or similar. */
-
/* Some Solaris stacks overoptimize and ignore the FIN on a
* retransmit when old data is attached. So strip it off
* since it is cheap to do so and saves bytes on the network.
TCP_SKB_CB(skb)->when = tcp_time_stamp;
if (tcp_transmit_skb(sk, skb, 0, priority))
NET_INC_STATS(LINUX_MIB_TCPABORTFAILED);
+
+ TCP_INC_STATS(TCP_MIB_OUTRSTS);
}
/* WARNING: This routine must only be called when we have already sent
{
struct xfrm_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+ if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto drop;
for (handler = tunnel64_handlers; handler; handler = handler->next)
/*
* Throw away all pending data and cancel the corking. Socket is locked.
*/
-static void udp_flush_pending_frames(struct sock *sk)
+void udp_flush_pending_frames(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
ip_flush_pending_frames(sk);
}
}
+EXPORT_SYMBOL(udp_flush_pending_frames);
/**
* udp4_hwcsum_outgoing - handle outgoing HW checksumming
onlink = -1;
spin_lock(&ifa->lock);
- lifetime = min_t(unsigned long,
- ifa->valid_lft, 0x7fffffffUL/HZ);
+
+ lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ);
+ /*
+ * Note: Because this address is
+ * not permanent, lifetime <
+ * LONG_MAX / HZ here.
+ */
if (time_before(expires,
ifa->tstamp + lifetime * HZ))
expires = ifa->tstamp + lifetime * HZ;
__u32 valid_lft;
__u32 prefered_lft;
int addr_type;
- unsigned long rt_expires;
struct inet6_dev *in6_dev;
pinfo = (struct prefix_info *) opt;
* 2) Configure prefixes with the auto flag set
*/
- /* Avoid arithmetic overflow. Really, we could
- save rt_expires in seconds, likely valid_lft,
- but it would require division in fib gc, that it
- not good.
- */
- if (valid_lft >= 0x7FFFFFFF/HZ)
- rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
- else
- rt_expires = valid_lft * HZ;
-
- /*
- * We convert this (in jiffies) to clock_t later.
- * Avoid arithmetic overflow there as well.
- * Overflow can happen only if HZ < USER_HZ.
- */
- if (HZ < USER_HZ && rt_expires > 0x7FFFFFFF / USER_HZ)
- rt_expires = 0x7FFFFFFF / USER_HZ;
-
if (pinfo->onlink) {
struct rt6_info *rt;
+ unsigned long rt_expires;
+
+ /* Avoid arithmetic overflow. Really, we could
+ * save rt_expires in seconds, likely valid_lft,
+ * but it would require division in fib gc, that it
+ * not good.
+ */
+ if (HZ > USER_HZ)
+ rt_expires = addrconf_timeout_fixup(valid_lft, HZ);
+ else
+ rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ);
+
+ if (addrconf_finite_timeout(rt_expires))
+ rt_expires *= HZ;
+
rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
dev->ifindex, 1);
if (rt && ((rt->rt6i_flags & (RTF_GATEWAY | RTF_DEFAULT)) == 0)) {
- if (rt->rt6i_flags&RTF_EXPIRES) {
- if (valid_lft == 0) {
- ip6_del_rt(rt);
- rt = NULL;
- } else {
- rt->rt6i_expires = jiffies + rt_expires;
- }
+ /* Autoconf prefix route */
+ if (valid_lft == 0) {
+ ip6_del_rt(rt);
+ rt = NULL;
+ } else if (addrconf_finite_timeout(rt_expires)) {
+ /* not infinity */
+ rt->rt6i_expires = jiffies + rt_expires;
+ rt->rt6i_flags |= RTF_EXPIRES;
+ } else {
+ rt->rt6i_flags &= ~RTF_EXPIRES;
+ rt->rt6i_expires = 0;
}
} else if (valid_lft) {
+ clock_t expires = 0;
+ int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
+ if (addrconf_finite_timeout(rt_expires)) {
+ /* not infinity */
+ flags |= RTF_EXPIRES;
+ expires = jiffies_to_clock_t(rt_expires);
+ }
addrconf_prefix_route(&pinfo->prefix, pinfo->prefix_len,
- dev, jiffies_to_clock_t(rt_expires), RTF_ADDRCONF|RTF_EXPIRES|RTF_PREFIX_RT);
+ dev, expires, flags);
}
if (rt)
dst_release(&rt->u.dst);
* Manual configuration of address on an interface
*/
static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen, __u8 ifa_flags, __u32 prefered_lft,
+ unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
__u32 valid_lft)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
int scope;
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
+ unsigned long timeout;
ASSERT_RTNL();
+ if (plen > 128)
+ return -EINVAL;
+
/* check the lifetime */
if (!valid_lft || prefered_lft > valid_lft)
return -EINVAL;
scope = ipv6_addr_scope(pfx);
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
+ flags = RTF_EXPIRES;
+ } else {
+ expires = 0;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ ifa_flags |= IFA_F_PERMANENT;
+ }
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
spin_unlock_bh(&ifp->lock);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
/*
* Note that section 3.1 of RFC 4429 indicates
* that the Optimistic flag should not be set for
}
static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen)
+ unsigned int plen)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
+ if (plen > 128)
+ return -EINVAL;
+
dev = __dev_get_by_index(net, ifindex);
if (!dev)
return -ENODEV;
static int inet6_addr_modify(struct inet6_ifaddr *ifp, u8 ifa_flags,
u32 prefered_lft, u32 valid_lft)
{
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
+ unsigned long timeout;
if (!valid_lft || (prefered_lft > valid_lft))
return -EINVAL;
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
+ flags = RTF_EXPIRES;
+ } else {
+ expires = 0;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ ifa_flags |= IFA_F_PERMANENT;
+ }
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
spin_lock_bh(&ifp->lock);
ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags;
ipv6_ifa_notify(0, ifp);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->idev->dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
addrconf_verify(0);
return 0;
neigh_sysctl_register(idev->dev, idev->nd_parms, NET_IPV6,
NET_IPV6_NEIGH, "ipv6",
&ndisc_ifinfo_sysctl_change,
- NULL);
+ ndisc_ifinfo_sysctl_strategy);
__addrconf_sysctl_register(dev_net(idev->dev), idev->dev->name,
idev->dev->ifindex, idev, &idev->cnf);
}
return 0;
}
-int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
+int datagram_send_ctl(struct net *net,
+ struct msghdr *msg, struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass)
{
for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
int addr_type;
- struct net_device *dev = NULL;
if (!CMSG_OK(msg, cmsg)) {
err = -EINVAL;
switch (cmsg->cmsg_type) {
case IPV6_PKTINFO:
case IPV6_2292PKTINFO:
+ {
+ struct net_device *dev = NULL;
+
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
err = -EINVAL;
goto exit_f;
fl->oif = src_info->ipi6_ifindex;
}
- addr_type = ipv6_addr_type(&src_info->ipi6_addr);
+ addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
- if (addr_type == IPV6_ADDR_ANY)
- break;
+ if (fl->oif) {
+ dev = dev_get_by_index(net, fl->oif);
+ if (!dev)
+ return -ENODEV;
+ } else if (addr_type & IPV6_ADDR_LINKLOCAL)
+ return -EINVAL;
- if (addr_type & IPV6_ADDR_LINKLOCAL) {
- if (!src_info->ipi6_ifindex)
- return -EINVAL;
- else {
- dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex);
- if (!dev)
- return -ENODEV;
- }
- }
- if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
- dev, 0)) {
- if (dev)
- dev_put(dev);
- err = -EINVAL;
- goto exit_f;
+ if (addr_type != IPV6_ADDR_ANY) {
+ int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
+ if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+ strict ? dev : NULL, 0))
+ err = -EINVAL;
+ else
+ ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
}
+
if (dev)
dev_put(dev);
- ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
+ if (err)
+ goto exit_f;
+
break;
+ }
case IPV6_FLOWINFO:
if (cmsg->cmsg_len < CMSG_LEN(4)) {
msg.msg_control = (void*)(fl->opt+1);
flowi.oif = 0;
- err = datagram_send_ctl(&msg, &flowi, fl->opt, &junk, &junk);
+ err = datagram_send_ctl(net, &msg, &flowi, fl->opt, &junk, &junk);
if (err)
goto done;
err = -EINVAL;
const char *name = vif->dev ? vif->dev->name : "none";
seq_printf(seq,
- "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n",
+ "%2td %-10s %8ld %7ld %8ld %7ld %05X\n",
vif - vif6_table,
name, vif->bytes_in, vif->pkt_in,
vif->bytes_out, vif->pkt_out,
struct ipv6_txoptions *opt;
struct sk_buff *pktopt;
- if (sk->sk_protocol != IPPROTO_UDP &&
- sk->sk_protocol != IPPROTO_UDPLITE &&
- sk->sk_protocol != IPPROTO_TCP)
+ if (sk->sk_type == SOCK_RAW)
+ break;
+
+ if (sk->sk_protocol == IPPROTO_UDP ||
+ sk->sk_protocol == IPPROTO_UDPLITE) {
+ struct udp_sock *up = udp_sk(sk);
+ if (up->pending == AF_INET6) {
+ retv = -EBUSY;
+ break;
+ }
+ } else if (sk->sk_protocol != IPPROTO_TCP)
break;
if (sk->sk_state != TCP_ESTABLISHED) {
msg.msg_controllen = optlen;
msg.msg_control = (void*)(opt+1);
- retv = datagram_send_ctl(&msg, &fl, opt, &junk, &junk);
+ retv = datagram_send_ctl(net, &msg, &fl, opt, &junk, &junk);
if (retv)
goto done;
update:
len = min_t(unsigned int, len, ipv6_optlen(hdr));
if (copy_to_user(optval, hdr, len))
return -EFAULT;
- return ipv6_optlen(hdr);
+ return len;
}
static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
len = ipv6_getsockopt_sticky(sk, np->opt,
optname, optval, len);
release_sock(sk);
+ /* check if ipv6_getsockopt_sticky() returns err code */
+ if (len < 0)
+ return len;
return put_user(len, optlen);
}
return ret;
}
-static int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
- int nlen, void __user *oldval,
- size_t __user *oldlenp,
- void __user *newval, size_t newlen)
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
arg.dst = dst;
hash = ip6qhashfn(id, src, dst);
+ local_bh_disable();
q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash);
+ local_bh_enable();
if (q == NULL)
goto oom;
goto ret_orig;
}
- spin_lock(&fq->q.lock);
+ spin_lock_bh(&fq->q.lock);
if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) {
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
pr_debug("Can't insert skb to queue\n");
fq_put(fq);
goto ret_orig;
if (ret_skb == NULL)
pr_debug("Can't reassemble fragmented packets\n");
}
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
fq_put(fq);
return ret_skb;
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
sk_common_release(sk);
}
+static int raw6_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip6_flush_pending_frames(sk);
+ release_sock(sk);
+ return 0;
+}
+
static int rawv6_init_sk(struct sock *sk)
{
struct raw6_sock *rp = raw6_sk(sk);
.name = "RAWv6",
.owner = THIS_MODULE,
.close = rawv6_close,
+ .destroy = raw6_destroy,
.connect = ip6_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = rawv6_ioctl,
.negative_advice = ip6_negative_advice,
.link_failure = ip6_link_failure,
.update_pmtu = ip6_rt_update_pmtu,
- .local_out = ip6_local_out,
+ .local_out = __ip6_local_out,
.entry_size = sizeof(struct rt6_info),
.entries = ATOMIC_INIT(0),
};
struct route_info *rinfo = (struct route_info *) opt;
struct in6_addr prefix_buf, *prefix;
unsigned int pref;
- u32 lifetime;
+ unsigned long lifetime;
struct rt6_info *rt;
if (len < sizeof(struct route_info)) {
if (pref == ICMPV6_ROUTER_PREF_INVALID)
pref = ICMPV6_ROUTER_PREF_MEDIUM;
- lifetime = ntohl(rinfo->lifetime);
- if (lifetime == 0xffffffff) {
- /* infinity */
- } else if (lifetime > 0x7fffffff/HZ) {
- /* Avoid arithmetic overflow */
- lifetime = 0x7fffffff/HZ - 1;
- }
+ lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ);
if (rinfo->length == 3)
prefix = (struct in6_addr *)rinfo->prefix;
(rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref);
if (rt) {
- if (lifetime == 0xffffffff) {
+ if (!addrconf_finite_timeout(lifetime)) {
rt->rt6i_flags &= ~RTF_EXPIRES;
} else {
rt->rt6i_expires = jiffies + HZ * lifetime;
}
rt->u.dst.obsolete = -1;
- rt->rt6i_expires = jiffies + clock_t_to_jiffies(cfg->fc_expires);
+ rt->rt6i_expires = (cfg->fc_flags & RTF_EXPIRES) ?
+ jiffies + clock_t_to_jiffies(cfg->fc_expires) :
+ 0;
if (cfg->fc_protocol == RTPROT_UNSPEC)
cfg->fc_protocol = RTPROT_BOOT;
NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric);
- expires = rt->rt6i_expires ? rt->rt6i_expires - jiffies : 0;
+ expires = (rt->rt6i_flags & RTF_EXPIRES) ?
+ rt->rt6i_expires - jiffies : 0;
+
if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0,
expires, rt->u.dst.error) < 0)
goto nla_put_failure;
static int ipip6_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
out:
read_unlock(&ipip6_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct ipv6hdr *iph6;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- int rel_info = 0;
- struct sk_buff *skb2;
- struct rt6_info *rt6i;
-
- if (len < hlen + sizeof(struct ipv6hdr))
- return;
- iph6 = (struct ipv6hdr*)(dp + hlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- if (icmp_hdr(skb)->un.gateway < hlen)
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMPV6_PARAMPROB;
- rel_info = icmp_hdr(skb)->un.gateway - hlen;
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* Too complicated case ... */
- return;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- rel_type = ICMPV6_TIME_EXCEED;
- rel_code = ICMPV6_EXC_HOPLIMIT;
- break;
- }
-
- /* Prepare fake skb to feed it to icmpv6_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)iph6);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- rt6i = rt6_lookup(dev_net(skb->dev), &iph6->saddr, NULL, NULL, 0);
- if (rt6i && rt6i->rt6i_dev) {
- skb2->dev = rt6i->rt6i_dev;
-
- rt6i = rt6_lookup(dev_net(skb->dev),
- &iph6->daddr, &iph6->saddr, NULL, 0);
-
- if (rt6i && rt6i->rt6i_dev && rt6i->rt6i_dev->type == ARPHRD_SIT) {
- struct ip_tunnel *t = netdev_priv(rt6i->rt6i_dev);
- if (rel_type == ICMPV6_TIME_EXCEED && t->parms.iph.ttl) {
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- }
- icmpv6_send(skb2, rel_type, rel_code, rel_info, skb2->dev);
- }
- }
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
{
struct xfrm6_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
+ if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto drop;
for (handler = tunnel46_handlers; handler; handler = handler->next)
{
struct udp_sock *up = udp_sk(sk);
- if (up->pending) {
+ if (up->pending == AF_INET)
+ udp_flush_pending_frames(sk);
+ else if (up->pending) {
up->len = 0;
up->pending = 0;
ip6_flush_pending_frames(sk);
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(*opt);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
} else {
dst_release(dst);
}
+ dst = NULL;
}
if (err > 0)
err = np->recverr ? net_xmit_errno(err) : 0;
release_sock(sk);
out:
+ dst_release(dst);
fl6_sock_release(flowlabel);
if (!err)
return len;
init_waitqueue_head(&self->query_wait);
- /* Initialise networking socket struct */
- sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
- sk->sk_family = PF_IRDA;
- sk->sk_protocol = protocol;
-
switch (sock->type) {
case SOCK_STREAM:
sock->ops = &irda_stream_ops;
self->max_sdu_size_rx = TTP_SAR_UNBOUND;
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
+ /* Initialise networking socket struct */
+ sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
+ sk->sk_family = PF_IRDA;
+ sk->sk_protocol = protocol;
+
/* Register as a client with IrLMP */
self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
self->mask.word = 0xffff;
x->sel.prefixlen_s = addr->sadb_address_prefixlen;
}
- if (x->props.mode == XFRM_MODE_TRANSPORT)
+ if (!x->sel.family)
x->sel.family = x->props.family;
if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
*
* Sends received pdus to the sap state machine.
*/
-static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb)
+static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb,
+ struct sock *sk)
{
struct llc_sap_state_ev *ev = llc_sap_ev(skb);
ev->type = LLC_SAP_EV_TYPE_PDU;
ev->reason = 0;
+ skb->sk = sk;
llc_sap_state_process(sap, skb);
}
break;
sock_hold(sk);
- skb_set_owner_r(skb1, sk);
- llc_sap_rcv(sap, skb1);
+ llc_sap_rcv(sap, skb1, sk);
sock_put(sk);
}
read_unlock_bh(&sap->sk_list.lock);
} else {
struct sock *sk = llc_lookup_dgram(sap, &laddr);
if (sk) {
- skb_set_owner_r(skb, sk);
- llc_sap_rcv(sap, skb);
+ llc_sap_rcv(sap, skb, sk);
sock_put(sk);
} else
kfree_skb(skb);
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
} else
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
vlansdata->vif.type != IEEE80211_IF_TYPE_AP) {
rcu_read_unlock();
return -EINVAL;
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
- * happen when it wakes up for the next time.
+ * when it wakes up for the next time.
*/
sta->flags |= WLAN_STA_CLEAR_PS_FILT;
if (bss->wmm_ie) {
wmm = 1;
}
+
+ /* get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode) */
+ rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
ieee80211_rx_bss_put(dev, bss);
+ } else {
+ rates = ~0;
+ rates_len = sband->n_bitrates;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
*pos++ = ifsta->ssid_len;
memcpy(pos, ifsta->ssid, ifsta->ssid_len);
- /* all supported rates should be added here but some APs
- * (e.g. D-Link DAP 1353 in b-only mode) don't like that
- * Therefore only add rates the AP supports */
- rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+ /* add all rates which were marked to be used above */
supp_rates_len = rates_len;
if (supp_rates_len > 8)
supp_rates_len = 8;
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
- kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
- buf_size * sizeof(struct sk_buf *));
+ buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
* only one argument, and both sta_info and TID are needed, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
- u16 tid = *(int *)data;
+ u16 tid = *(u8 *)data;
struct sta_info *temp_sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
void sta_rx_agg_session_timer_expired(unsigned long data)
{
/* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and verious sta_info are needed here, so init
+ * only one argument, and various sta_info are needed here, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_rx_bss_put(dev, bss);
-
return res;
}
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
- if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
- IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
- ifsta->state = IEEE80211_AUTHENTICATE;
- ieee80211_sta_reset_auth(dev, ifsta);
- return 0;
- }
-
spin_lock_bh(&local->sta_bss_lock);
freq = local->oper_channel->center_freq;
list_for_each_entry(bss, &local->sta_bss_list, list) {
if (!(bss->capability & WLAN_CAPABILITY_ESS))
continue;
- if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
- !!sdata->default_key)
+ if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+ IEEE80211_STA_AUTO_BSSID_SEL |
+ IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+ (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+ !!sdata->default_key))
continue;
if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
+ int ret;
DECLARE_MAC_BUF(mac);
#if 0
*pos++ = (u8) (rate / 5);
}
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len))) {
+ int ret;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
dev->name, print_mac(mac, bssid));
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = bss->freq;
- iwe.u.freq.e = 6;
+ iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
+ iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
- iwe.u.freq.e = 0;
+ iwe.u.freq.m = bss->freq;
+ iwe.u.freq.e = 6;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
-
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = bss->signal;
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
- u8 src[ETH_ALEN];
+ u8 src[ETH_ALEN] __aligned(2);
struct sk_buff *skb = rx->skb;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
*/
static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
{
- static const u8 pae_group_addr[ETH_ALEN]
+ static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] =
+const unsigned char rfc1042_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] =
+const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
+ rtnl_lock();
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ switch (sdata->vif.type) {
+ case IEEE80211_IF_TYPE_INVALID:
+ case IEEE80211_IF_TYPE_MNTR:
+ case IEEE80211_IF_TYPE_VLAN:
+ continue;
+ case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_IBSS:
+ case IEEE80211_IF_TYPE_WDS:
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ break;
+ }
+ if (sdata->dev == local->mdev)
+ continue;
+ if (netif_running(sdata->dev))
+ iterator(data, sdata->dev->dev_addr,
+ &sdata->vif);
+ }
+
+ rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+ struct ieee80211_hw *hw,
+ void (*iterator)(void *data, u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
+
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
rcu_read_unlock();
}
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
range->num_frequency = c;
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
- return 0;
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ ap_addr->sa_family = ARPHRD_ETHER;
+ memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
+ return 0;
+ } else {
+ memset(&ap_addr->sa_data, 0, ETH_ALEN);
+ return 0;
+ }
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
return 0;
err3:
+ kmem_cache_destroy(nf_ct_expect_cachep);
+err2:
nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
nf_ct_expect_hsize);
-err2:
- kmem_cache_destroy(nf_ct_expect_cachep);
err1:
return err;
}
static inline bool already_closed(const struct nf_conn *conn)
{
if (nf_ct_protonum(conn) == IPPROTO_TCP)
- return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT;
+ return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT ||
+ conn->proto.tcp.state == TCP_CONNTRACK_CLOSE;
else
return 0;
}
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute header and payload.
*/
int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put(skb, attrtype, attrlen, data);
return 0;
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put_nohdr(skb, attrlen, data);
return 0;
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_append(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
memcpy(skb_put(skb, attrlen), data, attrlen);
return 0;
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid,
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb)
tp = kzalloc(sizeof(*tp), GFP_KERNEL);
if (tp == NULL)
goto errout;
- err = -EINVAL;
+ err = -ENOENT;
tp_ops = tcf_proto_lookup_ops(tca[TCA_KIND]);
if (tp_ops == NULL) {
#ifdef CONFIG_KMOD
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb)
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static const struct Qdisc_class_ops dsmark_class_ops = {
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static void gred_destroy(struct Qdisc *sch)
nla_put_failure:
nla_nest_cancel(skb, nest);
- return -1;
+ return -EMSGSIZE;
}
static int
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int red_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
struct list_head *head = &asoc->peer.transport_addr_list;
struct list_head *pos;
+ if (asoc->peer.transport_count == 1)
+ return;
+
/* Find the next transport in a round-robin fashion. */
t = asoc->peer.retran_path;
pos = &t->transports;
t = list_entry(pos, struct sctp_transport, transports);
+ /* We have exhausted the list, but didn't find any
+ * other active transports. If so, use the next
+ * transport.
+ */
+ if (t == asoc->peer.retran_path) {
+ t = next;
+ break;
+ }
+
/* Try to find an active transport. */
if ((t->state == SCTP_ACTIVE) ||
if (!next)
next = t;
}
-
- /* We have exhausted the list, but didn't find any
- * other active transports. If so, use the next
- * transport.
- */
- if (t == asoc->peer.retran_path) {
- t = next;
- break;
- }
}
asoc->peer.retran_path = t;
/* Fills in the source address(saddr) based on the destination address(daddr)
* and asoc's bind address list.
*/
-static void sctp_v6_get_saddr(struct sctp_association *asoc,
+static void sctp_v6_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
if (!asoc) {
ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
&daddr->v6.sin6_addr,
- inet6_sk(asoc->base.sk)->srcprefs,
+ inet6_sk(&sk->inet.sk)->srcprefs,
&saddr->v6.sin6_addr);
SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: " NIP6_FMT "\n",
NIP6(saddr->v6.sin6_addr));
seq_printf(seq, NIP6_FMT " ", NIP6(addr->v6.sin6_addr));
}
+static void sctp_v6_ecn_capable(struct sock *sk)
+{
+ inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
/* Initialize a PF_INET6 socket msg_name. */
static void sctp_inet6_msgname(char *msgname, int *addr_len)
{
.skb_iif = sctp_v6_skb_iif,
.is_ce = sctp_v6_is_ce,
.seq_dump_addr = sctp_v6_seq_dump_addr,
+ .ecn_capable = sctp_v6_ecn_capable,
.net_header_len = sizeof(struct ipv6hdr),
.sockaddr_len = sizeof(struct sockaddr_in6),
#ifdef CONFIG_COMPAT
* Note: The works for IPv6 layer checks this bit too later
* in transmission. See IP6_ECN_flow_xmit().
*/
- INET_ECN_xmit(nskb->sk);
+ (*tp->af_specific->ecn_capable)(nskb->sk);
/* Set up the IP options. */
/* BUG: not implemented
INIT_LIST_HEAD(&q->sacked);
INIT_LIST_HEAD(&q->abandoned);
+ q->fast_rtx = 0;
q->outstanding_bytes = 0;
q->empty = 1;
q->cork = 0;
case SCTP_RTXR_FAST_RTX:
SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS);
sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX);
+ q->fast_rtx = 1;
break;
case SCTP_RTXR_PMTUD:
SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS);
* the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by
* following the procedures outlined in C1 - C5.
*/
- sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
+ if (reason == SCTP_RTXR_T3_RTX)
+ sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
- error = sctp_outq_flush(q, /* rtx_timeout */ 1);
+ /* Flush the queues only on timeout, since fast_rtx is only
+ * triggered during sack processing and the queue
+ * will be flushed at the end.
+ */
+ if (reason != SCTP_RTXR_FAST_RTX)
+ error = sctp_outq_flush(q, /* rtx_timeout */ 1);
if (error)
q->asoc->base.sk->sk_err = -error;
int rtx_timeout, int *start_timer)
{
struct list_head *lqueue;
- struct list_head *lchunk;
struct sctp_transport *transport = pkt->transport;
sctp_xmit_t status;
struct sctp_chunk *chunk, *chunk1;
struct sctp_association *asoc;
+ int fast_rtx;
int error = 0;
+ int timer = 0;
+ int done = 0;
asoc = q->asoc;
lqueue = &q->retransmit;
+ fast_rtx = q->fast_rtx;
- /* RFC 2960 6.3.3 Handle T3-rtx Expiration
+ /* This loop handles time-out retransmissions, fast retransmissions,
+ * and retransmissions due to opening of whindow.
+ *
+ * RFC 2960 6.3.3 Handle T3-rtx Expiration
*
* E3) Determine how many of the earliest (i.e., lowest TSN)
* outstanding DATA chunks for the address for which the
* [Just to be painfully clear, if we are retransmitting
* because a timeout just happened, we should send only ONE
* packet of retransmitted data.]
+ *
+ * For fast retransmissions we also send only ONE packet. However,
+ * if we are just flushing the queue due to open window, we'll
+ * try to send as much as possible.
*/
- lchunk = sctp_list_dequeue(lqueue);
-
- while (lchunk) {
- chunk = list_entry(lchunk, struct sctp_chunk,
- transmitted_list);
+ list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
/* Make sure that Gap Acked TSNs are not retransmitted. A
* simple approach is just to move such TSNs out of the
* next chunk.
*/
if (chunk->tsn_gap_acked) {
- list_add_tail(lchunk, &transport->transmitted);
- lchunk = sctp_list_dequeue(lqueue);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
continue;
}
+ /* If we are doing fast retransmit, ignore non-fast_rtransmit
+ * chunks
+ */
+ if (fast_rtx && !chunk->fast_retransmit)
+ continue;
+
/* Attempt to append this chunk to the packet. */
status = sctp_packet_append_chunk(pkt, chunk);
switch (status) {
case SCTP_XMIT_PMTU_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* If we are retransmitting, we should only
* send a single packet.
*/
- if (rtx_timeout) {
- list_add(lchunk, lqueue);
- lchunk = NULL;
- }
+ if (rtx_timeout || fast_rtx)
+ done = 1;
- /* Bundle lchunk in the next round. */
+ /* Bundle next chunk in the next round. */
break;
case SCTP_XMIT_RWND_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA as there is no more room
* at the receiver.
*/
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
case SCTP_XMIT_NAGLE_DELAY:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA because of nagle delay. */
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
default:
/* The append was successful, so add this chunk to
* the transmitted list.
*/
- list_add_tail(lchunk, &transport->transmitted);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
/* Mark the chunk as ineligible for fast retransmit
* after it is retransmitted.
if (chunk->fast_retransmit > 0)
chunk->fast_retransmit = -1;
- *start_timer = 1;
- q->empty = 0;
+ /* Force start T3-rtx timer when fast retransmitting
+ * the earliest outstanding TSN
+ */
+ if (!timer && fast_rtx &&
+ ntohl(chunk->subh.data_hdr->tsn) ==
+ asoc->ctsn_ack_point + 1)
+ timer = 2;
- /* Retrieve a new chunk to bundle. */
- lchunk = sctp_list_dequeue(lqueue);
+ q->empty = 0;
break;
}
- /* If we are here due to a retransmit timeout or a fast
- * retransmit and if there are any chunks left in the retransmit
- * queue that could not fit in the PMTU sized packet, they need
- * to be marked as ineligible for a subsequent fast retransmit.
- */
- if (rtx_timeout && !lchunk) {
- list_for_each_entry(chunk1, lqueue, transmitted_list) {
- if (chunk1->fast_retransmit > 0)
- chunk1->fast_retransmit = -1;
- }
+ /* Set the timer if there were no errors */
+ if (!error && !timer)
+ timer = 1;
+
+ if (done)
+ break;
+ }
+
+ /* If we are here due to a retransmit timeout or a fast
+ * retransmit and if there are any chunks left in the retransmit
+ * queue that could not fit in the PMTU sized packet, they need
+ * to be marked as ineligible for a subsequent fast retransmit.
+ */
+ if (rtx_timeout || fast_rtx) {
+ list_for_each_entry(chunk1, lqueue, transmitted_list) {
+ if (chunk1->fast_retransmit > 0)
+ chunk1->fast_retransmit = -1;
}
}
+ *start_timer = timer;
+
+ /* Clear fast retransmit hint */
+ if (fast_rtx)
+ q->fast_rtx = 0;
+
return error;
}
rtx_timeout, &start_timer);
if (start_timer)
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport,
+ start_timer-1);
/* This can happen on COOKIE-ECHO resend. Only
* one chunk can get bundled with a COOKIE-ECHO.
list_add_tail(&chunk->transmitted_list,
&transport->transmitted);
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport, start_timer-1);
q->empty = 0;
/* Walk through the bind address list and look for a bind
* address that matches the source address of the returned dst.
*/
+ sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
rcu_read_lock();
list_for_each_entry_rcu(laddr, &bp->address_list, list) {
if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
continue;
- sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a))
goto out_unlock;
}
/* For v4, the source address is cached in the route entry(dst). So no need
* to cache it separately and hence this is an empty routine.
*/
-static void sctp_v4_get_saddr(struct sctp_association *asoc,
+static void sctp_v4_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr));
}
+static void sctp_v4_ecn_capable(struct sock *sk)
+{
+ INET_ECN_xmit(sk);
+}
+
/* Event handler for inet address addition/deletion events.
* The sctp_local_addr_list needs to be protocted by a spin lock since
* multiple notifiers (say IPv4 and IPv6) may be running at the same
.skb_iif = sctp_v4_skb_iif,
.is_ce = sctp_v4_is_ce,
.seq_dump_addr = sctp_v4_seq_dump_addr,
+ .ecn_capable = sctp_v4_ecn_capable,
.net_header_len = sizeof(struct iphdr),
.sockaddr_len = sizeof(struct sockaddr_in),
#ifdef CONFIG_COMPAT
peer->rttvar = 0;
peer->srtt = 0;
peer->rto_pending = 0;
+ peer->fast_recovery = 0;
peer->last_time_heard = jiffies;
peer->last_time_used = jiffies;
/* Start T3_rtx timer if it is not already running and update the heartbeat
* timer. This routine is called every time a DATA chunk is sent.
*/
-void sctp_transport_reset_timers(struct sctp_transport *transport)
+void sctp_transport_reset_timers(struct sctp_transport *transport, int force)
{
/* RFC 2960 6.3.2 Retransmission Timer Rules
*
* address.
*/
- if (!timer_pending(&transport->T3_rtx_timer))
+ if (force || !timer_pending(&transport->T3_rtx_timer))
if (!mod_timer(&transport->T3_rtx_timer,
jiffies + transport->rto))
sctp_transport_hold(transport);
if (saddr)
memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
else
- af->get_saddr(asoc, dst, daddr, &transport->saddr);
+ af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
transport->dst = dst;
if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
cwnd = transport->cwnd;
flight_size = transport->flight_size;
+ /* See if we need to exit Fast Recovery first */
+ if (transport->fast_recovery &&
+ TSN_lte(transport->fast_recovery_exit, sack_ctsn))
+ transport->fast_recovery = 0;
+
/* The appropriate cwnd increase algorithm is performed if, and only
- * if the cumulative TSN has advanced and the congestion window is
+ * if the cumulative TSN whould advanced and the congestion window is
* being fully utilized.
*/
- if ((transport->asoc->ctsn_ack_point >= sack_ctsn) ||
+ if (TSN_lte(sack_ctsn, transport->asoc->ctsn_ack_point) ||
(flight_size < cwnd))
return;
pmtu = transport->asoc->pathmtu;
if (cwnd <= ssthresh) {
- /* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less
- * than or equal to ssthresh an SCTP endpoint MUST use the
- * slow start algorithm to increase cwnd only if the current
- * congestion window is being fully utilized and an incoming
- * SACK advances the Cumulative TSN Ack Point. Only when these
- * two conditions are met can the cwnd be increased otherwise
- * the cwnd MUST not be increased. If these conditions are met
- * then cwnd MUST be increased by at most the lesser of
- * 1) the total size of the previously outstanding DATA
- * chunk(s) acknowledged, and 2) the destination's path MTU.
+ /* RFC 4960 7.2.1
+ * o When cwnd is less than or equal to ssthresh, an SCTP
+ * endpoint MUST use the slow-start algorithm to increase
+ * cwnd only if the current congestion window is being fully
+ * utilized, an incoming SACK advances the Cumulative TSN
+ * Ack Point, and the data sender is not in Fast Recovery.
+ * Only when these three conditions are met can the cwnd be
+ * increased; otherwise, the cwnd MUST not be increased.
+ * If these conditions are met, then cwnd MUST be increased
+ * by, at most, the lesser of 1) the total size of the
+ * previously outstanding DATA chunk(s) acknowledged, and
+ * 2) the destination's path MTU. This upper bound protects
+ * against the ACK-Splitting attack outlined in [SAVAGE99].
*/
+ if (transport->fast_recovery)
+ return;
+
if (bytes_acked > pmtu)
cwnd += pmtu;
else
* cwnd = ssthresh
* partial_bytes_acked = 0
*/
+ if (transport->fast_recovery)
+ return;
+
+ /* Mark Fast recovery */
+ transport->fast_recovery = 1;
+ transport->fast_recovery_exit = transport->asoc->next_tsn - 1;
+
transport->ssthresh = max(transport->cwnd/2,
4*transport->asoc->pathmtu);
transport->cwnd = transport->ssthresh;
t->flight_size = 0;
t->error_count = 0;
t->rto_pending = 0;
+ t->fast_recovery = 0;
/* Initialize the state information for SFR-CACC */
t->cacc.changeover_active = 0;
# define RPCDBG_FACILITY RPCDBG_AUTH
#endif
-#define RPC_ANONYMOUS_USERID ((uid_t)-2)
-#define RPC_ANONYMOUS_GROUPID ((gid_t)-2)
+#define RPC_MACHINE_CRED_USERID ((uid_t)0)
+#define RPC_MACHINE_CRED_GROUPID ((gid_t)0)
struct generic_cred {
struct rpc_cred gc_base;
struct rpc_cred *rpc_lookup_machine_cred(void)
{
struct auth_cred acred = {
- .uid = RPC_ANONYMOUS_USERID,
- .gid = RPC_ANONYMOUS_GROUPID,
+ .uid = RPC_MACHINE_CRED_USERID,
+ .gid = RPC_MACHINE_CRED_GROUPID,
.machine_cred = 1,
};
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/fcntl.h>
-#include <linux/net.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/udp.h>
-#include <linux/tcp.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/file.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <net/sock.h>
-#include <net/checksum.h>
-#include <net/ip.h>
-#include <net/ipv6.h>
-#include <net/tcp_states.h>
-#include <linux/uaccess.h>
-#include <asm/ioctls.h>
-
-#include <linux/sunrpc/types.h>
-#include <linux/sunrpc/clnt.h>
-#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svc_xprt.h>
if (!(xprt->xpt_flags &
((1<<XPT_CONN)|(1<<XPT_DATA)|(1<<XPT_CLOSE)|(1<<XPT_DEFERRED))))
return;
- if (test_bit(XPT_DEAD, &xprt->xpt_flags))
- return;
cpu = get_cpu();
pool = svc_pool_for_cpu(xprt->xpt_server, cpu);
dom = im->m_client->h.name;
if (ipv6_addr_v4mapped(&addr)) {
- seq_printf(m, "%s" NIPQUAD_FMT "%s\n",
+ seq_printf(m, "%s " NIPQUAD_FMT " %s\n",
im->m_class,
ntohl(addr.s6_addr32[3]) >> 24 & 0xff,
ntohl(addr.s6_addr32[3]) >> 16 & 0xff,
ntohl(addr.s6_addr32[3]) >> 0 & 0xff,
dom);
} else {
- seq_printf(m, "%s" NIP6_FMT "%s\n",
+ seq_printf(m, "%s " NIP6_FMT " %s\n",
im->m_class, NIP6(addr), dom);
}
return 0;
* On our side, we need to read into a pagelist. The first page immediately
* follows the RPC header.
*
- * This function returns 1 to indicate success. The data is not yet in
+ * This function returns:
+ * 0 - No error and no read-list found.
+ *
+ * 1 - Successful read-list processing. The data is not yet in
* the pagelist and therefore the RPC request must be deferred. The
* I/O completion will enqueue the transport again and
* svc_rdma_recvfrom will complete the request.
*
+ * <0 - Error processing/posting read-list.
+ *
* NOTE: The ctxt must not be touched after the last WR has been posted
* because the I/O completion processing may occur on another
* processor and free / modify the context. Ne touche pas!
u64 sgl_offset;
struct rpcrdma_read_chunk *ch;
struct svc_rdma_op_ctxt *ctxt = NULL;
- struct svc_rdma_op_ctxt *head;
struct svc_rdma_op_ctxt *tmp_sge_ctxt;
struct svc_rdma_op_ctxt *tmp_ch_ctxt;
struct chunk_sge *ch_sge_ary;
ch_sge_ary = (struct chunk_sge *)tmp_ch_ctxt->sge;
svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count);
+ if (ch_count > RPCSVC_MAXPAGES)
+ return -EINVAL;
sge_count = rdma_rcl_to_sge(xprt, rqstp, hdr_ctxt, rmsgp,
sge, ch_sge_ary,
ch_count, byte_count);
- head = svc_rdma_get_context(xprt);
sgl_offset = 0;
ch_no = 0;
for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
ch->rc_discrim != 0; ch++, ch_no++) {
next_sge:
- if (!ctxt)
- ctxt = head;
- else {
- ctxt->next = svc_rdma_get_context(xprt);
- ctxt = ctxt->next;
- }
- ctxt->next = NULL;
+ ctxt = svc_rdma_get_context(xprt);
ctxt->direction = DMA_FROM_DEVICE;
- clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
/* Prepare READ WR */
* the client and the RPC needs to be enqueued.
*/
set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
+ ctxt->read_hdr = hdr_ctxt;
}
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
- printk(KERN_ERR "svcrdma: Error posting send = %d\n",
+ printk(KERN_ERR "svcrdma: Error %d posting RDMA_READ\n",
err);
- /*
- * Break the circular list so free knows when
- * to stop if the error happened to occur on
- * the last read
- */
- ctxt->next = NULL;
+ set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
goto out;
}
atomic_inc(&rdma_stat_read);
goto next_sge;
}
sgl_offset = 0;
- err = 0;
+ err = 1;
}
out:
while (rqstp->rq_resused)
rqstp->rq_respages[--rqstp->rq_resused] = NULL;
- if (err) {
- printk(KERN_ERR "svcrdma : RDMA_READ error = %d\n", err);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- /* Free the linked list of read contexts */
- while (head != NULL) {
- ctxt = head->next;
- svc_rdma_put_context(head, 1);
- head = ctxt;
- }
- return 0;
- }
-
- return 1;
+ return err;
}
static int rdma_read_complete(struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *data)
+ struct svc_rdma_op_ctxt *head)
{
- struct svc_rdma_op_ctxt *head = data->next;
int page_no;
int ret;
rqstp->rq_arg.len = head->arg.len;
rqstp->rq_arg.buflen = head->arg.buflen;
+ /* Free the context */
+ svc_rdma_put_context(head, 0);
+
/* XXX: What should this be? */
rqstp->rq_prot = IPPROTO_MAX;
-
- /*
- * Free the contexts we used to build the RDMA_READ. We have
- * to be careful here because the context list uses the same
- * next pointer used to chain the contexts associated with the
- * RDMA_READ
- */
- data->next = NULL; /* terminate circular list */
- do {
- data = head->next;
- svc_rdma_put_context(head, 0);
- head = data;
- } while (head != NULL);
+ svc_xprt_copy_addrs(rqstp, rqstp->rq_xprt);
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
ret, rqstp->rq_arg.len, rqstp->rq_arg.head[0].iov_base,
rqstp->rq_arg.head[0].iov_len);
- /* Indicate that we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
svc_xprt_received(rqstp->rq_xprt);
return ret;
}
dprintk("svcrdma: rqstp=%p\n", rqstp);
- /*
- * The rq_xprt_ctxt indicates if we've consumed an RQ credit
- * or not. It is used in the rdma xpo_release_rqst function to
- * determine whether or not to return an RQ WQE to the RQ.
- */
- rqstp->rq_xprt_ctxt = NULL;
-
spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
/* If the request is invalid, reply with an error */
if (len < 0) {
if (len == -ENOSYS)
- (void)svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
+ svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
goto close_out;
}
- /* Read read-list data. If we would need to wait, defer
- * it. Not that in this case, we don't return the RQ credit
- * until after the read completes.
- */
- if (rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt)) {
+ /* Read read-list data. */
+ ret = rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt);
+ if (ret > 0) {
+ /* read-list posted, defer until data received from client. */
svc_xprt_received(xprt);
return 0;
}
-
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
+ if (ret < 0) {
+ /* Post of read-list failed, free context. */
+ svc_rdma_put_context(ctxt, 1);
+ return 0;
+ }
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
return ret;
close_out:
- if (ctxt) {
+ if (ctxt)
svc_rdma_put_context(ctxt, 1);
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
- }
dprintk("svcrdma: transport %p is closing\n", xprt);
/*
* Set the close bit and enqueue it. svc_recv will see the
int page_no;
int ret;
+ /* Post a recv buffer to handle another request. */
+ ret = svc_rdma_post_recv(rdma);
+ if (ret) {
+ printk(KERN_INFO
+ "svcrdma: could not post a receive buffer, err=%d."
+ "Closing transport %p.\n", ret, rdma);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
+ return -ENOTCONN;
+ }
+
/* Prepare the context */
ctxt->pages[0] = page;
ctxt->count = 1;
spin_lock_bh(&xprt->sc_ctxt_lock);
if (ctxt) {
at_least_one = 1;
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
} else {
/* kmalloc failed...give up for now */
xprt->sc_ctxt_cnt--;
while (1) {
spin_lock_bh(&xprt->sc_ctxt_lock);
- if (unlikely(xprt->sc_ctxt_head == NULL)) {
+ if (unlikely(list_empty(&xprt->sc_ctxt_free))) {
/* Try to bump my cache. */
spin_unlock_bh(&xprt->sc_ctxt_lock);
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
continue;
}
- ctxt = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt->next;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
spin_unlock_bh(&xprt->sc_ctxt_lock);
ctxt->xprt = xprt;
INIT_LIST_HEAD(&ctxt->dto_q);
ctxt->count = 0;
+ atomic_inc(&xprt->sc_ctxt_used);
break;
}
return ctxt;
put_page(ctxt->pages[i]);
for (i = 0; i < ctxt->count; i++)
- dma_unmap_single(xprt->sc_cm_id->device->dma_device,
- ctxt->sge[i].addr,
- ctxt->sge[i].length,
- ctxt->direction);
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
+ ctxt->sge[i].addr,
+ ctxt->sge[i].length,
+ ctxt->direction);
+
spin_lock_bh(&xprt->sc_ctxt_lock);
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
spin_unlock_bh(&xprt->sc_ctxt_lock);
+ atomic_dec(&xprt->sc_ctxt_used);
}
/* ib_cq event handler */
list_del_init(&xprt->sc_dto_q);
spin_unlock_irqrestore(&dto_lock, flags);
- if (test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
- rq_cq_reap(xprt);
- set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- /*
- * If data arrived before established event,
- * don't enqueue. This defers RPC I/O until the
- * RDMA connection is complete.
- */
- if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
- svc_xprt_enqueue(&xprt->sc_xprt);
- }
-
- if (test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- sq_cq_reap(xprt);
- }
+ rq_cq_reap(xprt);
+ sq_cq_reap(xprt);
svc_xprt_put(&xprt->sc_xprt);
spin_lock_irqsave(&dto_lock, flags);
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an SQ
* completion.
- */
+ */
set_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags);
/*
*
* Take all completing WC off the CQE and enqueue the associated DTO
* context on the dto_q for the transport.
+ *
+ * Note that caller must hold a transport reference.
*/
static void rq_cq_reap(struct svcxprt_rdma *xprt)
{
struct ib_wc wc;
struct svc_rdma_op_ctxt *ctxt = NULL;
+ if (!test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_rq_poll);
- spin_lock_bh(&xprt->sc_rq_dto_lock);
while ((ret = ib_poll_cq(xprt->sc_rq_cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
ctxt->wc_status = wc.status;
ctxt->byte_len = wc.byte_len;
if (wc.status != IB_WC_SUCCESS) {
/* Close the transport */
+ dprintk("svcrdma: transport closing putting ctxt %p\n", ctxt);
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
continue;
}
+ spin_lock_bh(&xprt->sc_rq_dto_lock);
list_add_tail(&ctxt->dto_q, &xprt->sc_rq_dto_q);
+ spin_unlock_bh(&xprt->sc_rq_dto_lock);
+ svc_xprt_put(&xprt->sc_xprt);
}
- spin_unlock_bh(&xprt->sc_rq_dto_lock);
if (ctxt)
atomic_inc(&rdma_stat_rq_prod);
+
+ set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
+ /*
+ * If data arrived before established event,
+ * don't enqueue. This defers RPC I/O until the
+ * RDMA connection is complete.
+ */
+ if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
+ svc_xprt_enqueue(&xprt->sc_xprt);
}
/*
* Send Queue Completion Handler - potentially called on interrupt context.
+ *
+ * Note that caller must hold a transport reference.
*/
static void sq_cq_reap(struct svcxprt_rdma *xprt)
{
struct ib_cq *cq = xprt->sc_sq_cq;
int ret;
+
+ if (!test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_sq_poll);
while ((ret = ib_poll_cq(cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
case IB_WR_RDMA_READ:
if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
+ struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
+ BUG_ON(!read_hdr);
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- set_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
spin_lock_bh(&xprt->sc_read_complete_lock);
- list_add_tail(&ctxt->dto_q,
+ list_add_tail(&read_hdr->dto_q,
&xprt->sc_read_complete_q);
spin_unlock_bh(&xprt->sc_read_complete_lock);
svc_xprt_enqueue(&xprt->sc_xprt);
}
+ svc_rdma_put_context(ctxt, 0);
break;
default:
wc.opcode, wc.status);
break;
}
+ svc_xprt_put(&xprt->sc_xprt);
}
if (ctxt)
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an RQ
* completion.
- */
+ */
set_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags);
/*
xprt->sc_ctxt_max = ctxt_max;
xprt->sc_ctxt_bump = ctxt_bump;
xprt->sc_ctxt_cnt = 0;
- xprt->sc_ctxt_head = NULL;
+ atomic_set(&xprt->sc_ctxt_used, 0);
+
+ INIT_LIST_HEAD(&xprt->sc_ctxt_free);
for (i = 0; i < ctxt_count; i++) {
ctxt = kmalloc(sizeof(*ctxt), GFP_KERNEL);
if (ctxt) {
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
xprt->sc_ctxt_cnt++;
}
}
}
-static void destroy_context_cache(struct svc_rdma_op_ctxt *ctxt)
+static void destroy_context_cache(struct svcxprt_rdma *xprt)
{
- struct svc_rdma_op_ctxt *next;
- if (!ctxt)
- return;
-
- do {
- next = ctxt->next;
+ while (!list_empty(&xprt->sc_ctxt_free)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
kfree(ctxt);
- ctxt = next;
- } while (next);
+ }
}
static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
reqs +
cma_xprt->sc_sq_depth +
RPCRDMA_MAX_THREADS + 1); /* max */
- if (!cma_xprt->sc_ctxt_head) {
+ if (list_empty(&cma_xprt->sc_ctxt_free)) {
kfree(cma_xprt);
return NULL;
}
recv_wr.num_sge = ctxt->count;
recv_wr.wr_id = (u64)(unsigned long)ctxt;
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
+ if (ret) {
+ svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_put_context(ctxt, 1);
+ }
return ret;
}
{
struct svcxprt_rdma *listen_xprt = new_cma_id->context;
struct svcxprt_rdma *newxprt;
+ struct sockaddr *sa;
/* Create a new transport */
newxprt = rdma_create_xprt(listen_xprt->sc_xprt.xpt_server, 0);
dprintk("svcrdma: Creating newxprt=%p, cm_id=%p, listenxprt=%p\n",
newxprt, newxprt->sc_cm_id, listen_xprt);
+ /* Set the local and remote addresses in the transport */
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
+ svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
+ svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+
/*
* Enqueue the new transport on the accept queue of the listening
* transport
if (xprt) {
set_bit(XPT_CLOSE, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
break;
case RDMA_CM_EVENT_DEVICE_REMOVAL:
cma_xprt = rdma_create_xprt(serv, 1);
if (!cma_xprt)
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
xprt = &cma_xprt->sc_xprt;
listen_id = rdma_create_id(rdma_listen_handler, cma_xprt, RDMA_PS_TCP);
if (IS_ERR(listen_id)) {
- svc_xprt_put(&cma_xprt->sc_xprt);
- dprintk("svcrdma: rdma_create_id failed = %ld\n",
- PTR_ERR(listen_id));
- return (void *)listen_id;
+ ret = PTR_ERR(listen_id);
+ dprintk("svcrdma: rdma_create_id failed = %d\n", ret);
+ goto err0;
}
+
ret = rdma_bind_addr(listen_id, sa);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_bind_addr failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
cma_xprt->sc_cm_id = listen_id;
ret = rdma_listen(listen_id, RPCRDMA_LISTEN_BACKLOG);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_listen failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
/*
svc_xprt_set_local(&cma_xprt->sc_xprt, sa, salen);
return &cma_xprt->sc_xprt;
+
+ err1:
+ rdma_destroy_id(listen_id);
+ err0:
+ kfree(cma_xprt);
+ return ERR_PTR(ret);
}
/*
struct rdma_conn_param conn_param;
struct ib_qp_init_attr qp_attr;
struct ib_device_attr devattr;
- struct sockaddr *sa;
int ret;
int i;
newxprt->sc_sq_depth = qp_attr.cap.max_send_wr;
newxprt->sc_max_requests = qp_attr.cap.max_recv_wr;
}
- svc_xprt_get(&newxprt->sc_xprt);
newxprt->sc_qp = newxprt->sc_cm_id->qp;
/* Register all of physical memory */
/* Swap out the handler */
newxprt->sc_cm_id->event_handler = rdma_cma_handler;
+ /*
+ * Arm the CQs for the SQ and RQ before accepting so we can't
+ * miss the first message
+ */
+ ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
+ ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
+
/* Accept Connection */
set_bit(RDMAXPRT_CONN_PENDING, &newxprt->sc_flags);
memset(&conn_param, 0, sizeof conn_param);
newxprt->sc_max_requests,
newxprt->sc_ord);
- /* Set the local and remote addresses in the transport */
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
- svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
- svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
-
- ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
return &newxprt->sc_xprt;
errout:
dprintk("svcrdma: failure accepting new connection rc=%d.\n", ret);
/* Take a reference in case the DTO handler runs */
svc_xprt_get(&newxprt->sc_xprt);
- if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp)) {
+ if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp))
ib_destroy_qp(newxprt->sc_qp);
- svc_xprt_put(&newxprt->sc_xprt);
- }
rdma_destroy_id(newxprt->sc_cm_id);
/* This call to put will destroy the transport */
svc_xprt_put(&newxprt->sc_xprt);
return NULL;
}
-/*
- * Post an RQ WQE to the RQ when the rqst is being released. This
- * effectively returns an RQ credit to the client. The rq_xprt_ctxt
- * will be null if the request is deferred due to an RDMA_READ or the
- * transport had no data ready (EAGAIN). Note that an RPC deferred in
- * svc_process will still return the credit, this is because the data
- * is copied and no longer consume a WQE/WC.
- */
static void svc_rdma_release_rqst(struct svc_rqst *rqstp)
{
- int err;
- struct svcxprt_rdma *rdma =
- container_of(rqstp->rq_xprt, struct svcxprt_rdma, sc_xprt);
- if (rqstp->rq_xprt_ctxt) {
- BUG_ON(rqstp->rq_xprt_ctxt != rdma);
- err = svc_rdma_post_recv(rdma);
- if (err)
- dprintk("svcrdma: failed to post an RQ WQE error=%d\n",
- err);
- }
- rqstp->rq_xprt_ctxt = NULL;
}
/*
- * When connected, an svc_xprt has at least three references:
- *
- * - A reference held by the QP. We still hold that here because this
- * code deletes the QP and puts the reference.
+ * When connected, an svc_xprt has at least two references:
*
* - A reference held by the cm_id between the ESTABLISHED and
* DISCONNECTED events. If the remote peer disconnected first, this
* - A reference held by the svc_recv code that called this function
* as part of close processing.
*
- * At a minimum two references should still be held.
+ * At a minimum one references should still be held.
*/
static void svc_rdma_detach(struct svc_xprt *xprt)
{
/* Disconnect and flush posted WQE */
rdma_disconnect(rdma->sc_cm_id);
-
- /* Destroy the QP if present (not a listener) */
- if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) {
- ib_destroy_qp(rdma->sc_qp);
- svc_xprt_put(xprt);
- }
-
- /* Destroy the CM ID */
- rdma_destroy_id(rdma->sc_cm_id);
}
-static void svc_rdma_free(struct svc_xprt *xprt)
+static void __svc_rdma_free(struct work_struct *work)
{
- struct svcxprt_rdma *rdma = (struct svcxprt_rdma *)xprt;
+ struct svcxprt_rdma *rdma =
+ container_of(work, struct svcxprt_rdma, sc_work);
dprintk("svcrdma: svc_rdma_free(%p)\n", rdma);
+
/* We should only be called from kref_put */
- BUG_ON(atomic_read(&xprt->xpt_ref.refcount) != 0);
+ BUG_ON(atomic_read(&rdma->sc_xprt.xpt_ref.refcount) != 0);
+
+ /*
+ * Destroy queued, but not processed read completions. Note
+ * that this cleanup has to be done before destroying the
+ * cm_id because the device ptr is needed to unmap the dma in
+ * svc_rdma_put_context.
+ */
+ spin_lock_bh(&rdma->sc_read_complete_lock);
+ while (!list_empty(&rdma->sc_read_complete_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_read_complete_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_read_complete_lock);
+
+ /* Destroy queued, but not processed recv completions */
+ spin_lock_bh(&rdma->sc_rq_dto_lock);
+ while (!list_empty(&rdma->sc_rq_dto_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_rq_dto_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_rq_dto_lock);
+
+ /* Warn if we leaked a resource or under-referenced */
+ WARN_ON(atomic_read(&rdma->sc_ctxt_used) != 0);
+
+ /* Destroy the QP if present (not a listener) */
+ if (rdma->sc_qp && !IS_ERR(rdma->sc_qp))
+ ib_destroy_qp(rdma->sc_qp);
+
if (rdma->sc_sq_cq && !IS_ERR(rdma->sc_sq_cq))
ib_destroy_cq(rdma->sc_sq_cq);
if (rdma->sc_pd && !IS_ERR(rdma->sc_pd))
ib_dealloc_pd(rdma->sc_pd);
- destroy_context_cache(rdma->sc_ctxt_head);
+ /* Destroy the CM ID */
+ rdma_destroy_id(rdma->sc_cm_id);
+
+ destroy_context_cache(rdma);
kfree(rdma);
}
+static void svc_rdma_free(struct svc_xprt *xprt)
+{
+ struct svcxprt_rdma *rdma =
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
+ INIT_WORK(&rdma->sc_work, __svc_rdma_free);
+ schedule_work(&rdma->sc_work);
+}
+
static int svc_rdma_has_wspace(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
int ret;
if (test_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags))
- return 0;
+ return -ENOTCONN;
BUG_ON(wr->send_flags != IB_SEND_SIGNALED);
BUG_ON(((struct svc_rdma_op_ctxt *)(unsigned long)wr->wr_id)->wr_op !=
if (xprt->sc_sq_depth == atomic_read(&xprt->sc_sq_count)) {
spin_unlock_bh(&xprt->sc_lock);
atomic_inc(&rdma_stat_sq_starve);
- /* See if we can reap some SQ WR */
+
+ /* See if we can opportunistically reap SQ WR to make room */
sq_cq_reap(xprt);
/* Wait until SQ WR available if SQ still full */
continue;
}
/* Bumped used SQ WR count and post */
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_send(xprt->sc_qp, wr, &bad_wr);
if (!ret)
atomic_inc(&xprt->sc_sq_count);
- else
+ else {
+ svc_xprt_put(&xprt->sc_xprt);
dprintk("svcrdma: failed to post SQ WR rc=%d, "
"sc_sq_count=%d, sc_sq_depth=%d\n",
ret, atomic_read(&xprt->sc_sq_count),
xprt->sc_sq_depth);
+ }
spin_unlock_bh(&xprt->sc_lock);
break;
}
return ret;
}
-int svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
- enum rpcrdma_errcode err)
+void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
+ enum rpcrdma_errcode err)
{
struct ib_send_wr err_wr;
struct ib_sge sge;
/* Post It */
ret = svc_rdma_send(xprt, &err_wr);
if (ret) {
- dprintk("svcrdma: Error posting send = %d\n", ret);
+ dprintk("svcrdma: Error %d posting send for protocol error\n",
+ ret);
svc_rdma_put_context(ctxt, 1);
}
-
- return ret;
}
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_station(struct sk_buff *skb,
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_mpath(struct sk_buff *skb,
}
},
{
- .name = "hmac(ripemd160)",
- .compat = "ripemd160",
+ .name = "hmac(rmd160)",
+ .compat = "rmd160",
.uinfo = {
.auth = {
switch (type) {
case XFRMA_ALG_AUTH:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "digest_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_CRYPT:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "cipher_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_COMP:
- /* Zero length keys are legal. */
break;
default:
include include/config/auto.conf
include scripts/Kbuild.include
+# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
ifneq ($(KBUILD_EXTMOD),)
+
+# set src + obj - they may be used when building the .mod.c file
+obj := $(KBUILD_EXTMOD)
+src := $(obj)
+
# Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.18';
+my $V = '0.19';
use Getopt::Long qw(:config no_auto_abbrev);
__kprobes|
__(?:mem|cpu|dev|)(?:initdata|init)
}x;
+our $Modifier;
our $Inline = qr{inline|__always_inline|noinline};
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
our @typeList = (
qr{void},
- qr{char},
- qr{short},
- qr{int},
- qr{long},
+ qr{(?:unsigned\s+)?char},
+ qr{(?:unsigned\s+)?short},
+ qr{(?:unsigned\s+)?int},
+ qr{(?:unsigned\s+)?long},
+ qr{(?:unsigned\s+)?long\s+int},
+ qr{(?:unsigned\s+)?long\s+long},
+ qr{(?:unsigned\s+)?long\s+long\s+int},
qr{unsigned},
qr{float},
qr{double},
qr{bool},
- qr{long\s+int},
- qr{long\s+long},
- qr{long\s+long\s+int},
qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
qr{struct\s+$Ident},
qr{union\s+$Ident},
qr{${Ident}_handler},
qr{${Ident}_handler_fn},
);
+our @modifierList = (
+ qr{fastcall},
+);
sub build_types {
+ my $mods = "(?: \n" . join("|\n ", @modifierList) . "\n)";
my $all = "(?: \n" . join("|\n ", @typeList) . "\n)";
$NonptrType = qr{
- \b
(?:const\s+)?
- (?:unsigned\s+)?
+ (?:$mods\s+)?
(?:
- $all|
- (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+ (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+ (?:${all}\b)
)
(?:\s+$Sparse|\s+const)*
- \b
}x;
$Type = qr{
- \b$NonptrType\b
+ $NonptrType
(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Inline|\s+$Sparse|\s+$Attribute)*
+ (?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
+ $Modifier = qr{(?:$Attribute|$Sparse|$mods)};
}
build_types();
$off++;
next;
}
- if (substr($line, $off, 2) eq $sanitise_quote) {
+ if (substr($line, $off, 2) eq '*/') {
$sanitise_quote = '';
substr($res, $off, 2, "$;$;");
$off++;
}
# The pathname on a #include may be surrounded by '<' and '>'.
- if ($res =~ /^.#\s*include\s+\<(.*)\>/) {
+ if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
my $clean = 'X' x length($1);
$res =~ s@\<.*\>@<$clean>@;
# The whole of a #error is a string.
- } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) {
+ } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
my $clean = 'X' x length($1);
- $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@;
+ $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
}
return $res;
print "DECLARE($1)\n" if ($dbg_values > 1);
$type = 'T';
- } elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
+ } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1,$2)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
}
$type = 'E';
- } elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) {
+ } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
print "UNDEF($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
print "PRE_RESTART($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:endif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:endif))/o) {
print "PRE_END($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
sub possible {
my ($possible, $line) = @_;
- #print "CHECK<$possible>\n";
+ print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
$possible ne 'goto' && $possible ne 'return' &&
- $possible ne 'struct' && $possible ne 'enum' &&
$possible ne 'case' && $possible ne 'else' &&
- $possible ne 'typedef') {
- warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
- push(@typeList, $possible);
+ $possible ne 'asm' &&
+ $possible !~ /^(typedef|struct|enum)\b/) {
+ # Check for modifiers.
+ $possible =~ s/\s*$Storage\s*//g;
+ $possible =~ s/\s*$Sparse\s*//g;
+ if ($possible =~ /^\s*$/) {
+
+ } elsif ($possible =~ /\s/) {
+ $possible =~ s/\s*$Type\s*//g;
+ warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
+ push(@modifierList, $possible);
+
+ } else {
+ warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
+ push(@typeList, $possible);
+ }
build_types();
}
}
} else {
$realcnt=1+1;
}
+ $in_comment = 0;
# Guestimate if this is a continuing comment. Run
# the context looking for a comment "edge". If this
ERROR("trailing whitespace\n" . $herevet);
}
#80 column limit
- if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) {
+ if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
+ $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+ {
WARN("line over 80 characters\n" . $herecurr);
}
# Ignore functions being called
} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
+ # declarations always start with types
+ } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+ my $type = $1;
+ $type =~ s/\s+/ /g;
+ possible($type, "A:" . $s);
+
# definitions in global scope can only start with types
} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) {
- possible($1, $s);
-
- # declarations always start with types
- } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) {
- possible($1, $s);
+ possible($1, "B:" . $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) {
- possible($1, $s);
+ possible($1, "C:" . $s);
}
# Check for any sort of function declaration.
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
- if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
+ if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
- possible($1, $s);
+ possible($1, "D:" . $s);
}
}
}
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
- if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
ERROR("that open brace { should be on the previous line\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
$ctx =~ /\)\s*\;\s*$/ &&
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
}
}
#
# check for malformed paths in #include statements (uses RAW line)
- if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
+ if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
my $path = $1;
if ($path =~ m{//}) {
ERROR("malformed #include filename\n" .
}
# check for external initialisers.
- if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) {
+ if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
ERROR("do not initialise externals to 0 or NULL\n" .
$herecurr);
}
# make sense.
if ($line =~ /\btypedef\s/ &&
$line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ &&
+ $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
$line !~ /\b__bitwise(?:__|)\b/) {
WARN("do not add new typedefs\n" . $herecurr);
}
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
- if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and
- !($line=~/\#define.*do\s{/) and !($line=~/}/)) {
+ if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
+ !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) {
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
- } elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+ } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
# cpp #elif statement condition may start with a (
- } elsif ($ctx =~ /^.\#\s*elif\s*$/) {
+ } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
-# check spacing on paretheses
+# check spacing on parentheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
- $line !~ /for\s*\(.*;\s+\)/) {
+ $line !~ /for\s*\(.*;\s+\)/ &&
+ $line !~ /:\s+\)/) {
ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
WARN("labels should not be indented\n" . $herecurr);
}
+# Return is not a function.
+ if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) {
+ my $spacing = $1;
+ my $value = $2;
+
+ # Flatten any parentheses and braces
+ while ($value =~ s/\([^\(\)]*\)/1/) {
+ }
+
+ if ($value =~ /^(?:$Ident|-?$Constant)$/) {
+ ERROR("return is not a function, parentheses are not required\n" . $herecurr);
+
+ } elsif ($spacing !~ /\s+/) {
+ ERROR("space required before the open parenthesis '('\n" . $herecurr);
+ }
+ }
+
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
ERROR("space required before the open parenthesis '('\n" . $herecurr);
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
- $c !~ /^.\#\s*if/)
+ $c !~ /^.\s*\#\s*if/)
{
ERROR("trailing statements should be on next line\n" . $herecurr);
}
# }
#no spaces allowed after \ in define
- if ($line=~/\#define.*\\\s$/) {
+ if ($line=~/\#\s*define.*\\\s$/) {
WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
}
#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
- if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
- my $checkfile = "$root/include/linux/$1.h";
- if (-f $checkfile && $1 ne 'irq') {
+ if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
+ my $checkfile = "include/linux/$1.h";
+ if (-f "$root/$checkfile" && $realfile ne $checkfile &&
+ $1 ne 'irq')
+ {
WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
$herecurr);
}
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known good container
- if ($prevline =~ /\#define.*\\/ &&
- $prevline !~/(?:do\s+{|\(\{|\{)/ &&
- $line !~ /(?:do\s+{|\(\{|\{)/ &&
- $line !~ /^.\s*$Declare\s/) {
- # Grab the first statement, if that is the entire macro
- # its ok. This may start either on the #define line
- # or the one below.
+ if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
my $ln = $linenr;
my $cnt = $realcnt;
- my $off = 0;
+ my ($off, $dstat, $dcond, $rest);
+ my $ctx = '';
- # If the macro starts on the define line start
- # grabbing the statement after the identifier
- $prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$};
- ##print "1<$1> 2<$2>\n";
- if (defined $2 && $2 ne '') {
- $off = length($1);
- $ln--;
- $cnt++;
- while ($lines[$ln - 1] =~ /^-/) {
- $ln--;
- $cnt++;
- }
+ my $args = defined($1);
+
+ # Find the end of the macro and limit our statement
+ # search to that.
+ while ($cnt > 0 && defined $lines[$ln - 1] &&
+ $lines[$ln - 1] =~ /^(?:-|..*\\$)/)
+ {
+ $ctx .= $rawlines[$ln - 1] . "\n";
+ $ln++;
+ $cnt--;
+ }
+ $ctx .= $rawlines[$ln - 1];
+
+ ($dstat, $dcond, $ln, $cnt, $off) =
+ ctx_statement_block($linenr, $ln - $linenr + 1, 0);
+ #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
+ #print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+
+ # Extract the remainder of the define (if any) and
+ # rip off surrounding spaces, and trailing \'s.
+ $rest = '';
+ if (defined $lines[$ln - 1] &&
+ $off > length($lines[$ln - 1]))
+ {
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ while ($cnt > 0) {
+ $rest .= substr($lines[$ln - 1], $off) . "\n";
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ $rest =~ s/\\\n.//g;
+ $rest =~ s/^\s*//s;
+ $rest =~ s/\s*$//s;
+
+ # Clean up the original statement.
+ if ($args) {
+ substr($dstat, 0, length($dcond), '');
+ } else {
+ $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
}
- my @ctx = ctx_statement($ln, $cnt, $off);
- my $ctx_ln = $ln + $#ctx + 1;
- my $ctx = join("\n", @ctx);
+ $dstat =~ s/\\\n.//g;
+ $dstat =~ s/^\s*//s;
+ $dstat =~ s/\s*$//s;
- # Pull in any empty extension lines.
- while ($ctx =~ /\\$/ &&
- $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
- $ctx .= $lines[$ctx_ln - 1];
- $ctx_ln++;
+ # Flatten any parentheses and braces
+ while ($dstat =~ s/\([^\(\)]*\)/1/) {
+ }
+ while ($dstat =~ s/\{[^\{\}]*\}/1/) {
}
- if ($ctx =~ /\\$/) {
- if ($ctx =~ /;/) {
+ my $exceptions = qr{
+ $Declare|
+ module_param_named|
+ MODULE_PARAM_DESC|
+ DECLARE_PER_CPU|
+ DEFINE_PER_CPU|
+ __typeof__\(
+ }x;
+ if ($rest ne '') {
+ if ($rest !~ /while\s*\(/ &&
+ $dstat !~ /$exceptions/)
+ {
ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
- } else {
+ }
+
+ } elsif ($ctx !~ /;/) {
+ if ($dstat ne '' &&
+ $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
+ $dstat !~ /$exceptions/ &&
+ $dstat =~ /$Operators/)
+ {
ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
}
# don't include deprecated include files (uses RAW line)
for my $inc (@dep_includes) {
- if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
+ if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) {
ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
}
}
}
# warn about #if 0
- if ($line =~ /^.#\s*if\s+0\b/) {
+ if ($line =~ /^.\s*\#\s*if\s+0\b/) {
CHK("if this code is redundant consider removing it\n" .
$herecurr);
}
WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
}
}
-# check for needless usb_free_urb() checks
- if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
- my $expr = $1;
- if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
- WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev);
- }
- }
# warn about #ifdefs in C files
-# if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
+# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
# print "#ifdef in C files should be avoided\n";
# print "$herecurr";
# $clean = 0;
# }
# warn about spacing in #ifdefs
- if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) {
+ if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
ERROR("exactly one space required after that #$1\n" . $herecurr);
}
}
}
# check of hardware specific defines
- if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
+ if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
CHK("architecture specific defines should be avoided\n" . $herecurr);
}
# check for new externs in .c files.
if ($realfile =~ /\.c$/ && defined $stat &&
- $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s)
+ $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
{
- my $paren_space = $1;
+ my $function_name = $1;
+ my $paren_space = $2;
my $s = $stat;
if (defined $cond) {
substr($s, 0, length($cond), '');
}
- if ($s =~ /^\s*;/) {
+ if ($s =~ /^\s*;/ &&
+ $function_name ne 'uninitialized_var')
+ {
WARN("externs should be avoided in .c files\n" . $herecurr);
}
# use of NR_CPUS is usually wrong
# ignore definitions of NR_CPUS and usage to define arrays as likely right
if ($line =~ /\bNR_CPUS\b/ &&
- $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ &&
- $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ &&
$line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/)
/* exclude also MIPS ELF local symbols ($L123 instead of .L123) */
else if (str[0] == '$')
return -1;
+ /* exclude debugging symbols */
+ else if (stype == 'N')
+ return -1;
/* include the type field in the symbol name, so that it gets
* compressed together */
{
struct gstr gs;
gs.s = malloc(sizeof(char) * 64);
- gs.len = 16;
+ gs.len = 64;
strcpy(gs.s, "\0");
return gs;
}
push_parameter($2, "$type $1", $file);
}
elsif ($param =~ m/(.*?):(\d+)/) {
- push_parameter($1, "$type:$2", $file)
+ if ($type ne "") { # skip unnamed bit-fields
+ push_parameter($1, "$type:$2", $file)
+ }
}
else {
push_parameter($param, $type, $file);
# For System.map filter away:
# a - local absolute symbols
# U - undefined global symbols
+# N - debugging symbols
# w - local weak symbols
# readprofile starts reading symbols when _stext is found, and
# so we just ignore them to let readprofile continue to work.
# (At least sparc64 has __crc_ in the middle).
-$NM -n $1 | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
/* consume all digits */
while (*e && e != sec && isdigit(*e))
e--;
- if (*e == '.') {
+ if (*e == '.' && !strstr(sec, ".linkonce")) {
warn("%s (%s): unexpected section name.\n"
"The (.[number]+) following section name are "
"ld generated and not expected.\n"
uname -a
echo ' '
-gcc --version 2>&1| head -n 1 | grep -v gcc | awk \
+gcc -dumpversion 2>&1| awk \
'NR==1{print "Gnu C ", $1}'
-gcc --version 2>&1| grep gcc | awk \
-'NR==1{print "Gnu C ", $3}'
-
make --version 2>&1 | awk -F, '{print $1}' | awk \
'/GNU Make/{print "Gnu make ",$NF}'
spinlock_t lock;
};
+static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
+{
+ return container_of(s, struct dev_cgroup, css);
+}
+
static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
{
- return container_of(cgroup_subsys_state(cgroup, devices_subsys_id),
- struct dev_cgroup, css);
+ return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
}
struct cgroup_subsys devices_subsys;
static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
struct dev_whitelist_item *wh)
{
- struct dev_whitelist_item *whcopy;
+ struct dev_whitelist_item *whcopy, *walk;
whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL);
if (!whcopy)
memcpy(whcopy, wh, sizeof(*whcopy));
spin_lock(&dev_cgroup->lock);
- list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+ list_for_each_entry(walk, &dev_cgroup->whitelist, list) {
+ if (walk->type != wh->type)
+ continue;
+ if (walk->major != wh->major)
+ continue;
+ if (walk->minor != wh->minor)
+ continue;
+
+ walk->access |= wh->access;
+ kfree(whcopy);
+ whcopy = NULL;
+ }
+
+ if (whcopy != NULL)
+ list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
spin_unlock(&dev_cgroup->lock);
return 0;
}
int devcgroup_inode_permission(struct inode *inode, int mask)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
return 0;
if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
return 0;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
int devcgroup_inode_mknod(int mode, dev_t dev)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
extern struct rb_root key_serial_tree;
extern spinlock_t key_serial_lock;
-extern struct semaphore key_alloc_sem;
extern struct mutex key_construction_mutex;
extern wait_queue_head_t request_key_conswq;
*/
final = sbsp->smk_default;
+ /*
+ * If this is the root inode the superblock
+ * may be in the process of initialization.
+ * If that is the case use the root value out
+ * of the superblock.
+ */
+ if (opt_dentry->d_parent == opt_dentry) {
+ isp->smk_inode = sbsp->smk_root;
+ isp->smk_flags |= SMK_INODE_INSTANT;
+ goto unlockandout;
+ }
+
/*
* This is pretty hackish.
* Casey says that we shouldn't have to do
and read <file:Documentation/sound/oss/README.modules>; the module
will be called soundcore.
- I'm told that even without a sound card, you can make your computer
- say more than an occasional beep, by programming the PC speaker.
- Kernel patches and supporting utilities to do that are in the pcsp
- package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
source "sound/oss/dmasound/Kconfig"
if !M68K
return minor;
}
snd_minors[minor] = preg;
- preg->dev = device_create(sound_class, device, MKDEV(major, minor),
- "%s", name);
+ preg->dev = device_create_drvdata(sound_class, device,
+ MKDEV(major, minor),
+ private_data, "%s", name);
if (IS_ERR(preg->dev)) {
snd_minors[minor] = NULL;
mutex_unlock(&sound_mutex);
return minor;
}
- if (preg->dev)
- dev_set_drvdata(preg->dev, private_data);
-
mutex_unlock(&sound_mutex);
return 0;
}
config SND_PCSP
- tristate "PC-Speaker support"
+ tristate "PC-Speaker support (READ HELP!)"
depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
depends on INPUT
+ depends on EXPERIMENTAL
depends on SND
select SND_PCM
help
You can compile this as a module which will be called snd-pcsp.
+ WARNING: if you already have a soundcard, enabling this
+ driver may lead to a problem. Namely, it may get loaded
+ before the other sound driver of yours, making the
+ pc-speaker a default sound device. Which is likely not
+ what you want. To make this driver play nicely with other
+ sound driver, you can add this into your /etc/modprobe.conf:
+ options snd-pcsp index=2
+
You don't need this driver if you only want your pc-speaker to beep.
You don't need this driver if you have a tablet piezo beeper
in your PC instead of the real speaker.
- It should not hurt to say Y or M here in all other cases.
+ Say N if you have a sound card.
+ Say M if you don't.
+ Say Y only if you really know what you do.
config SND_MPU401_UART
tristate
return -EINVAL;
hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE;
+ pcsp_chip.timer.cb_mode = HRTIMER_CB_SOFTIRQ;
pcsp_chip.timer.function = pcsp_do_timer;
card = snd_card_new(index, id, THIS_MODULE, 0);
/* default timer freq for PC-Speaker: 18643 Hz */
#define DIV_18KHZ 64
#define MAX_DIV DIV_18KHZ
-#define CUR_DIV() (MAX_DIV >> chip->treble)
+#define CALC_DIV(d) (MAX_DIV >> (d))
+#define CUR_DIV() CALC_DIV(chip->treble)
#define PCSP_MAX_TREBLE 1
/* unfortunately, with hrtimers 37KHz does not work very well :( */
#define PCSP_DEFAULT_SDIV (DIV_18KHZ >> 1)
#define PCSP_DEFAULT_SRATE (PIT_TICK_RATE / PCSP_DEFAULT_SDIV)
#define PCSP_INDEX_INC() (1 << (PCSP_MAX_TREBLE - chip->treble))
-#define PCSP_RATE() (PIT_TICK_RATE / CUR_DIV())
+#define PCSP_CALC_RATE(i) (PIT_TICK_RATE / CALC_DIV(i))
+#define PCSP_RATE() PCSP_CALC_RATE(chip->treble)
#define PCSP_MIN_RATE__1 MAX_DIV/PIT_TICK_RATE
#define PCSP_MAX_RATE__1 MIN_DIV/PIT_TICK_RATE
#define PCSP_MAX_PERIOD_NS (1000000000ULL * PCSP_MIN_RATE__1)
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <sound/pcm.h>
-#include <linux/interrupt.h>
#include <asm/io.h>
#include "pcsp.h"
MODULE_PARM_DESC(nforce_wa, "Apply NForce chipset workaround "
"(expect bad sound)");
-static void pcsp_start_timer(unsigned long dummy)
-{
- hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
-}
-
-/*
- * We need the hrtimer_start as a tasklet to avoid
- * the nasty locking problem. :(
- * The problem:
- * - The timer handler is called with the cpu_base->lock
- * already held by hrtimer code.
- * - snd_pcm_period_elapsed() takes the
- * substream->self_group.lock.
- * So far so good.
- * But the snd_pcsp_trigger() is called with the
- * substream->self_group.lock held, and it calls
- * hrtimer_start(), which takes the cpu_base->lock.
- * You see the problem. We have the code pathes
- * which take two locks in a reverse order. This
- * can deadlock and the lock validator complains.
- * The only solution I could find was to move the
- * hrtimer_start() into a tasklet. -stsp
- */
-static DECLARE_TASKLET(pcsp_start_timer_tasklet, pcsp_start_timer, 0);
+#define DMIX_WANTS_S16 1
enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
{
- unsigned long flags;
unsigned char timer_cnt, val;
- int periods_elapsed;
+ int fmt_size, periods_elapsed;
u64 ns;
size_t period_bytes, buffer_bytes;
struct snd_pcm_substream *substream;
return HRTIMER_RESTART;
}
- /* hrtimer calls us from both hardirq and softirq contexts,
- * so irqsave :( */
- spin_lock_irqsave(&chip->substream_lock, flags);
+ spin_lock_irq(&chip->substream_lock);
/* Takashi Iwai says regarding this extra lock:
If the irq handler handles some data on the DMA buffer, it should
goto exit_nr_unlock2;
runtime = substream->runtime;
- /* assume it is u8 mono */
- val = runtime->dma_area[chip->playback_ptr];
+ fmt_size = snd_pcm_format_physical_width(runtime->format) >> 3;
+ /* assume it is mono! */
+ val = runtime->dma_area[chip->playback_ptr + fmt_size - 1];
+ if (snd_pcm_format_signed(runtime->format))
+ val ^= 0x80;
timer_cnt = val * CUR_DIV() / 256;
if (timer_cnt && chip->enable) {
period_bytes = snd_pcm_lib_period_bytes(substream);
buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- chip->playback_ptr += PCSP_INDEX_INC();
+ chip->playback_ptr += PCSP_INDEX_INC() * fmt_size;
periods_elapsed = chip->playback_ptr - chip->period_ptr;
if (periods_elapsed < 0) {
- printk(KERN_WARNING "PCSP: playback_ptr inconsistent "
+#if PCSP_DEBUG
+ printk(KERN_INFO "PCSP: buffer_bytes mod period_bytes != 0 ? "
"(%zi %zi %zi)\n",
chip->playback_ptr, period_bytes, buffer_bytes);
+#endif
periods_elapsed += buffer_bytes;
}
periods_elapsed /= period_bytes;
chip->period_ptr %= buffer_bytes;
}
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
if (!atomic_read(&chip->timer_active))
return HRTIMER_NORESTART;
exit_nr_unlock2:
snd_pcm_stream_unlock(substream);
exit_nr_unlock1:
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
return HRTIMER_NORESTART;
}
atomic_set(&chip->timer_active, 1);
chip->thalf = 0;
- tasklet_schedule(&pcsp_start_timer_tasklet);
+ hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
}
static void pcsp_stop_playing(struct snd_pcsp *chip)
.info = (SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_HALF_DUPLEX |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
- .formats = SNDRV_PCM_FMTBIT_U8,
+ .formats = (SNDRV_PCM_FMTBIT_U8
+#if DMIX_WANTS_S16
+ | SNDRV_PCM_FMTBIT_S16_LE
+#endif
+ ),
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = PCSP_DEFAULT_SRATE,
.rate_max = PCSP_DEFAULT_SRATE,
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d", PCSP_RATE());
+ sprintf(uinfo->value.enumerated.name, "%d",
+ PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
val = ac97->regs[AC97_AD_MISC];
ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+ if (ac97->spec.ad18xx.lo_as_master)
+ ucontrol->value.integer.value[0] =
+ !ucontrol->value.integer.value[0];
return 0;
}
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- val = !ucontrol->value.integer.value[0]
- ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+ val = !ucontrol->value.integer.value[0];
+ if (ac97->spec.ad18xx.lo_as_master)
+ val = !val;
+ val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
return snd_ac97_update_bits(ac97, AC97_AD_MISC,
AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
}
{
unsigned short val = 0;
/* clear LODIS if shared jack is to be used for Surround out */
- if (is_shared_linein(ac97))
+ if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
val |= (1 << 12);
/* clear CLDIS if shared jack is to be used for C/LFE out */
if (is_shared_micin(ac97))
static int patch_ad1888_specific(struct snd_ac97 *ac97)
{
- /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
- snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
- snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+ if (!ac97->spec.ad18xx.lo_as_master) {
+ /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+ "Master Surround Playback");
+ snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+ "Master Playback");
+ }
return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
}
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1888_build_ops;
- /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
- /* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+ /*
+ * LO can be used as a real line-out on some devices,
+ * and we need to revert the front/surround mixer switches
+ */
+ if (ac97->subsystem_vendor == 0x1043 &&
+ ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+ ac97->spec.ad18xx.lo_as_master = 1;
+
+ misc = snd_ac97_read(ac97, AC97_AD_MISC);
/* AD-compatible mode */
/* Stereo mutes enabled */
- misc = snd_ac97_read(ac97, AC97_AD_MISC);
- snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
- AC97_AD198X_LOSEL |
- AC97_AD198X_HPSEL |
- AC97_AD198X_MSPLT |
- AC97_AD198X_AC97NC);
+ misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+ if (!ac97->spec.ad18xx.lo_as_master)
+ /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+ /* it seems that most vendors connect line-out connector to
+ * headphone out of AC'97
+ */
+ misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+ snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
ac97->flags |= AC97_STEREO_MUTES;
return 0;
}
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
- "EMU10K1", emu)) {
- err = -EBUSY;
- goto error;
- }
- emu->irq = pci->irq;
-
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
32 * 1024, &emu->ptb_pages) < 0) {
emu->fx8010.etram_pages.area = NULL;
emu->fx8010.etram_pages.bytes = 0;
+ /* irq handler must be registered after I/O ports are activated */
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+ "EMU10K1", emu)) {
+ err = -EBUSY;
+ goto error;
+ }
+ emu->irq = pci->irq;
+
/*
* Init to 0x02109204 :
* Clock accuracy = 0 (1000ppm)
static struct snd_pci_quirk ad1988_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG),
SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG),
+ SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG),
{}
};
{ } /* end */
};
-static struct hda_input_mux ad1884a_mobile_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 }, /* port-C */
- { "Mix", 0x3 },
- },
-};
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
present ? 0x00 : 0x02);
}
+/* switch to external mic if plugged */
+static void ad1884a_hp_automic(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
+ present ? 0 : 1);
+}
+
#define AD1884A_HP_EVENT 0x37
+#define AD1884A_MIC_EVENT 0x36
/* unsolicited event for HP jack sensing */
static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res)
{
- if ((res >> 26) != AD1884A_HP_EVENT)
- return;
- ad1884a_hp_automute(codec);
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_hp_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_hp_automic(codec);
+ break;
+ }
}
/* initialize jack-sensing, too */
{
ad198x_init(codec);
ad1884a_hp_automute(codec);
+ ad1884a_hp_automic(codec);
return 0;
}
/* Port-F pin */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Port-C pin - internal mic-in */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
{ } /* end */
};
spec->mixers[0] = ad1884a_mobile_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_mobile_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
break;
static struct snd_pci_quirk cmi9880_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG),
+ SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL),
SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG),
{} /* terminator */
};
case 0x10ec0269:
case 0x10ec0862:
case 0x10ec0662:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x14, 0,
AC_VERB_SET_EAPD_BTLENABLE, 2);
snd_hda_codec_write(codec, 0x15, 0,
case 0x10ec0883:
case 0x10ec0885:
case 0x10ec0888:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_HP_EVENT);
spec->unsol_event = alc_sku_unsol_event;
- spec->init_hook = alc_sku_automute;
}
/*
/* SND_PCI_QUIRK(0x1043, 0x1964, "ASUS", ALC880_ASUS_DIG), */
SND_PCI_QUIRK(0x1043, 0x1973, "ASUS", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS", ALC880_ASUS_DIG),
- SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_ASUS),
+ SND_PCI_QUIRK(0x1043, 0x814e, "ASUS P5GD1 w/SPDIF", ALC880_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
};
/* mute/unmute internal speaker according to the hp jack and mute state */
},
};
-/* mute/unmute internal speaker according to the hp jack and mute state */
+/* mute/unmute internal speaker according to the hp jacks and mute state */
static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
{
struct alc_spec *spec = codec->spec;
unsigned int mute;
if (force || !spec->sense_updated) {
- unsigned int present_int_hp, present_dock_hp;
+ unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_int_hp = snd_hda_codec_read(codec, 0x14, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- snd_hda_codec_read(codec, 0x1B, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_dock_hp = snd_hda_codec_read(codec, 0x1b, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- spec->jack_present = (present_int_hp & 0x80000000) != 0;
- spec->jack_present |= (present_dock_hp & 0x80000000) != 0;
+ /* check laptop HP jack */
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ /* need to execute and sync at first */
+ snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
+ /* check docking HP jack */
+ present |= snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ if (present & AC_PINSENSE_PRESENCE)
+ spec->jack_present = 1;
+ else
+ spec->jack_present = 0;
spec->sense_updated = 1;
}
- if (spec->jack_present) {
- /* mute internal speaker */
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, HDA_AMP_MUTE);
- } else {
- /* unmute internal speaker if necessary */
+ /* unmute internal speaker only if both HPs are unplugged and
+ * master switch is on
+ */
+ if (spec->jack_present)
+ mute = HDA_AMP_MUTE;
+ else
mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, mute);
- }
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, mute);
}
/* unsolicited event for HP jack sensing */
alc262_fujitsu_automute(codec, 1);
}
+static void alc262_fujitsu_init_hook(struct hda_codec *codec)
+{
+ alc262_fujitsu_automute(codec, 1);
+}
+
/* bind volumes of both NID 0x0c and 0x0d */
static struct hda_bind_ctls alc262_fujitsu_bind_master_vol = {
.ops = &snd_hda_bind_vol,
.channel_mode = alc262_modes,
.input_mux = &alc262_fujitsu_capture_source,
.unsol_event = alc262_fujitsu_unsol_event,
+ .init_hook = alc262_fujitsu_init_hook,
},
[ALC262_HP_BPC] = {
.mixers = { alc262_HP_BPC_mixer },
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
static struct snd_kcontrol_new stac925x_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
{ } /* end */
};
},
};
+static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 8,
+ .nid = 0x10, /* NID to query formats and rates */
+ /* We got noisy outputs on the right channel on VT1708 when
+ * 24bit samples are used. Until any workaround is found,
+ * disable the 24bit format, so far.
+ */
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .ops = {
+ .open = via_playback_pcm_open,
+ .prepare = via_playback_pcm_prepare,
+ .cleanup = via_playback_pcm_cleanup
+ },
+};
+
static struct hda_pcm_stream vt1708_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
spec->stream_name_analog = "VT1708 Analog";
spec->stream_analog_playback = &vt1708_pcm_analog_playback;
+ /* disable 32bit format on VT1708 */
+ if (codec->vendor_id == 0x11061708)
+ spec->stream_analog_playback = &vt1708_pcm_analog_s16_playback;
spec->stream_analog_capture = &vt1708_pcm_analog_capture;
spec->stream_name_digital = "VT1708 Digital";
dev = caiaqdev(card);
dev->chip.dev = usb_dev;
dev->chip.card = card;
- dev->chip.usb_id = USB_ID(usb_dev->descriptor.idVendor,
- usb_dev->descriptor.idProduct);
+ dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&dev->spinlock);
snd_card_set_dev(card, &usb_dev->dev);
*/
void kvm_vcpu_block(struct kvm_vcpu *vcpu)
{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&vcpu->wq, &wait);
-
- /*
- * We will block until either an interrupt or a signal wakes us up
- */
- while (!kvm_cpu_has_interrupt(vcpu)
- && !kvm_cpu_has_pending_timer(vcpu)
- && !signal_pending(current)
- && !kvm_arch_vcpu_runnable(vcpu)) {
- set_current_state(TASK_INTERRUPTIBLE);
+ DEFINE_WAIT(wait);
+
+ for (;;) {
+ prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
+
+ if (kvm_cpu_has_interrupt(vcpu))
+ break;
+ if (kvm_cpu_has_pending_timer(vcpu))
+ break;
+ if (kvm_arch_vcpu_runnable(vcpu))
+ break;
+ if (signal_pending(current))
+ break;
+
vcpu_put(vcpu);
schedule();
vcpu_load(vcpu);
}
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&vcpu->wq, &wait);
+ finish_wait(&vcpu->wq, &wait);
}
void kvm_resched(struct kvm_vcpu *vcpu)
projects / linux-2.6-omap-h63xx.git / commitdiff