* CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0
+       if (ntp_synced()
            && xtime.tv_sec > state.last_rtc_update + 660
            && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2
            && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) {
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
 
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
 
  */
 static inline void do_set_rtc(void)
 {
-       if (time_status & STA_UNSYNC || set_rtc == NULL)
+       if (!ntp_synced() || set_rtc == NULL)
                return;
 
        if (next_rtc_update &&
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
  */
 static inline void do_set_rtc(void)
 {
-       if (time_status & STA_UNSYNC || set_rtc == NULL)
+       if (!ntp_synced() || set_rtc == NULL)
                return;
 
 //FIXME - timespec.tv_sec is a time_t not unsigned long
 
        xtime.tv_sec = tv->tv_sec;
        xtime.tv_nsec = tv->tv_nsec;
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
         * The division here is not time critical since it will run once in 
         * 11 minutes
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
         * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
 
        xtime.tv_sec = tv->tv_sec;
        xtime.tv_nsec = tv->tv_nsec;
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
         * This code is run on a timer.  If the clock is set, that timer
         * may not expire at the correct time.  Thus, we adjust...
         */
-       if ((time_status & STA_UNSYNC) != 0)
+       if (!ntp_synced())
                /*
                 * Not synced, exit, do not restart a timer (if one is
                 * running, let it run out).
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
 
         * called as close as possible to 500 ms before the new second starts.
         */
        write_seqlock(&xtime_lock);
-       if ((time_status & STA_UNSYNC) == 0
+       if (ntp_synced()
                && xtime.tv_sec > last_rtc_update + 660
                && (xtime.tv_nsec / 1000) >= 500000 - ((unsigned)TICK_SIZE) / 2
                && (xtime.tv_nsec / 1000) <= 500000 + ((unsigned)TICK_SIZE) / 2)
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
         * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
        write_seqlock_irq(&xtime_lock);
        xtime.tv_sec = value;
        xtime.tv_nsec = 0;
-       time_adjust = 0;                        /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
 
        return 0;
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                        /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
 
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
         * called as close as possible to 500 ms before the new second starts.
         */
        write_seqlock(&xtime_lock);
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 
         * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to when a second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 
                set_normalized_timespec(&xtime, sec, nsec);
                set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-               time_adjust = 0;                /* stop active adjtime() */
-               time_status |= STA_UNSYNC;
-               time_maxerror = NTP_PHASE_LIMIT;
-               time_esterror = NTP_PHASE_LIMIT;
+               ntp_clear();
        }
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
 
                 * We should have an rtc call that only sets the minutes and
                 * seconds like on Intel to avoid problems with non UTC clocks.
                 */
-               if ( ppc_md.set_rtc_time && (time_status & STA_UNSYNC) == 0 &&
+               if ( ppc_md.set_rtc_time && ntp_synced() &&
                     xtime.tv_sec - last_rtc_update >= 659 &&
                     abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ &&
                     jiffies - wall_jiffies == 1) {
         */
        last_rtc_update = new_sec - 658;
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irqrestore(&xtime_lock, flags);
        clock_was_set();
        return 0;
 
          * We should have an rtc call that only sets the minutes and
          * seconds like on Intel to avoid problems with non UTC clocks.
          */
-        if ( (time_status & STA_UNSYNC) == 0 &&
+        if (ntp_synced() &&
              xtime.tv_sec - last_rtc_update >= 659 &&
              abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
              jiffies - wall_jiffies == 1) {
         */
        last_rtc_update = new_sec - 658;
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
 
        delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp),
                             do_gtod.varp->tb_to_xs );
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
        return 0;
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
 
         * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
 
         * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 
 
        xtime.tv_sec = tv->tv_sec;
        xtime.tv_nsec = tv->tv_nsec;
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        return 0;
 }
 
 
 
 
        /* Determine when to update the Mostek clock. */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        return 0;
 }
 
 
        static long last_rtc_update;
 
        /* Determine when to update the Mostek clock. */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
 
         * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
         * called as close as possible to 500 ms before the new second starts.
         */
-       if ((time_status & STA_UNSYNC) == 0 &&
+       if (ntp_synced() &&
            xtime.tv_sec > last_rtc_update + 660 &&
            (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
            (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
        xtime.tv_sec = tv->tv_sec;
        xtime.tv_nsec = tv->tv_nsec;
 
-       time_adjust = 0;                /* stop active adjtime () */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
 
        write_sequnlock_irq (&xtime_lock);
        clock_was_set();
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
 
        write_sequnlock_irq(&xtime_lock);
        clock_was_set();
  * off) isn't likely to go away much sooner anyway.
  */
 
-       if ((~time_status & STA_UNSYNC) && xtime.tv_sec > rtc_update &&
+       if (ntp_synced() && xtime.tv_sec > rtc_update &&
                abs(xtime.tv_nsec - 500000000) <= tick_nsec / 2) {
                set_rtc_mmss(xtime.tv_sec);
                rtc_update = xtime.tv_sec + 660;
 
        set_normalized_timespec(&xtime, sec, nsec);
        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-       time_adjust = 0;                /* stop active adjtime() */
-       time_status |= STA_UNSYNC;
-       time_maxerror = NTP_PHASE_LIMIT;
-       time_esterror = NTP_PHASE_LIMIT;
+       ntp_clear();
        write_sequnlock_irq(&xtime_lock);
        return 0;
 }
                next += CCOUNT_PER_JIFFY;
                do_timer (regs); /* Linux handler in kernel/timer.c */
 
-               if ((time_status & STA_UNSYNC) == 0 &&
+               if (ntp_synced() &&
                    xtime.tv_sec - last_rtc_update >= 659 &&
                    abs((xtime.tv_nsec/1000)-(1000000-1000000/HZ))<5000000/HZ &&
                    jiffies - wall_jiffies == 1) {
 
 extern long pps_errcnt;                /* calibration errors */
 extern long pps_stbcnt;                /* stability limit exceeded */
 
+/**
+ * ntp_clear - Clears the NTP state variables
+ *
+ * Must be called while holding a write on the xtime_lock
+ */
+static inline void ntp_clear(void)
+{
+       time_adjust = 0;                /* stop active adjtime() */
+       time_status |= STA_UNSYNC;
+       time_maxerror = NTP_PHASE_LIMIT;
+       time_esterror = NTP_PHASE_LIMIT;
+}
+
+/**
+ * ntp_synced - Returns 1 if the NTP status is not UNSYNC
+ *
+ */
+static inline int ntp_synced(void)
+{
+       return !(time_status & STA_UNSYNC);
+}
+
+
 #ifdef CONFIG_TIME_INTERPOLATION
 
 #define TIME_SOURCE_CPU 0