[ARM] pxa: update pxa serial driver to use clk support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 59889f6a86b26d0995c68dbe05c02d836c4db680..af3a011b2b244719d95a32a500b4eb72e47c4f45 100644 (file)
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -42,6 +42,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/hardware.h>
@@ -55,7 +56,7 @@ struct uart_pxa_port {
        unsigned char           lcr;
        unsigned char           mcr;
        unsigned int            lsr_break_flag;
-       unsigned int            cken;
+       struct clk              *clk;
        char                    *name;
 };
 
@@ -351,6 +352,8 @@ static int serial_pxa_startup(struct uart_port *port)
        else
                up->mcr = 0;
 
+       up->port.uartclk = clk_get_rate(up->clk);
+
        /*
         * Allocate the IRQ
         */
@@ -546,9 +549,11 @@ serial_pxa_pm(struct uart_port *port, unsigned int state,
              unsigned int oldstate)
 {
        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-       pxa_set_cken(up->cken, !state);
+
        if (!state)
-               udelay(1);
+               clk_enable(up->clk);
+       else
+               clk_disable(up->clk);
 }
 
 static void serial_pxa_release_port(struct uart_port *port)
@@ -635,6 +640,8 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
        struct uart_pxa_port *up = serial_pxa_ports[co->index];
        unsigned int ier;
 
+       clk_enable(up->clk);
+
        /*
         *      First save the IER then disable the interrupts
         */
@@ -649,6 +656,8 @@ serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
         */
        wait_for_xmitr(up);
        serial_out(up, UART_IER, ier);
+
+       clk_disable(up->clk);
 }
 
 static int __init
@@ -752,6 +761,12 @@ static int serial_pxa_probe(struct platform_device *dev)
        if (!sport)
                return -ENOMEM;
 
+       sport->clk = clk_get(&dev->dev, "UARTCLK");
+       if (IS_ERR(sport->clk)) {
+               ret = PTR_ERR(sport->clk);
+               goto err_free;
+       }
+
        sport->port.type = PORT_PXA;
        sport->port.iotype = UPIO_MEM;
        sport->port.mapbase = mmres->start;
@@ -761,7 +776,7 @@ static int serial_pxa_probe(struct platform_device *dev)
        sport->port.line = dev->id;
        sport->port.dev = &dev->dev;
        sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-       sport->port.uartclk = 921600 * 16;
+       sport->port.uartclk = clk_get_rate(sport->clk);
 
        /*
         * Is it worth keeping this?
@@ -780,7 +795,7 @@ static int serial_pxa_probe(struct platform_device *dev)
        sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1);
        if (!sport->port.membase) {
                ret = -ENOMEM;
-               goto err_free;
+               goto err_clk;
        }
 
        serial_pxa_ports[dev->id] = sport;
@@ -790,6 +805,8 @@ static int serial_pxa_probe(struct platform_device *dev)
 
        return 0;
 
+ err_clk:
+       clk_put(sport->clk);
  err_free:
        kfree(sport);
        return ret;
@@ -802,6 +819,7 @@ static int serial_pxa_remove(struct platform_device *dev)
        platform_set_drvdata(dev, NULL);
 
        uart_remove_one_port(&serial_pxa_reg, &sport->port);
+       clk_put(sport->clk);
        kfree(sport);
 
        return 0;