omap 5912 osk: GPIO updates

Start cleaning up GPIO handling for OMAP5912 OSK board:

 - Initialize GPIOs using the cross-platform calls, not the old
   OMAP-private ones.

 - Move touchscreen setup out of ads7846 code into board-specfic
   setup code, where it belongs.

This doesn't depend on the patches to update OMAP to use the
gpiolib implementation framework.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5279e35a8aec17ef89f397f43c1c90939e96864c..dd9ece8f409fcda532ab2eed6d4dff68bab2c428 100644 (file)
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -198,7 +198,7 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
-       if ((omap_request_gpio(0)) < 0) {
+       if ((gpio_request(0, "smc_irq")) < 0) {
                printk("Error requesting gpio 0 for smc91x irq\n");
                return;
        }
@@ -210,7 +210,7 @@ static void __init osk_init_smc91x(void)
 static void __init osk_init_cf(void)
 {
        omap_cfg_reg(M7_1610_GPIO62);
-       if ((omap_request_gpio(62)) < 0) {
+       if ((gpio_request(62, "cf_irq")) < 0) {
                printk("Error requesting gpio 62 for CF irq\n");
                return;
        }
@@ -334,7 +334,7 @@ static struct platform_device *mistral_devices[] __initdata = {
 
 static int mistral_get_pendown_state(void)
 {
-       return !omap_get_gpio_datain(4);
+       return !gpio_get_value(4);
 }
 
 static const struct ads7846_platform_data mistral_ts_info = {
@@ -396,25 +396,31 @@ static void __init osk_mistral_init(void)
        omap_cfg_reg(W14_1610_CCP_DATAP);
 
        /* CAM_PWDN */
-       if (omap_request_gpio(11) == 0) {
+       if (gpio_request(11, "cam_pwdn") == 0) {
                omap_cfg_reg(N20_1610_GPIO11);
-               omap_set_gpio_direction(11, 0 /* out */);
-               omap_set_gpio_dataout(11, 0 /* off */);
+               gpio_direction_output(11, 0);
        } else
                pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
 
 
        /* omap_cfg_reg(P19_1610_GPIO6); */     /* BUSY */
+       gpio_request(6, "ts_busy");
+       gpio_direction_input(6);
+
        omap_cfg_reg(P20_1610_GPIO4);   /* PENIRQ */
+       gpio_request(4, "ts_int");
+       gpio_direction_input(4);
        set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+
        spi_register_board_info(mistral_boardinfo,
                        ARRAY_SIZE(mistral_boardinfo));
 
        /* the sideways button (SW1) is for use as a "wakeup" button */
        omap_cfg_reg(N15_1610_MPUIO2);
-       if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
+       if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
                int ret = 0;
-               omap_set_gpio_direction(OMAP_MPUIO(2), 1);
+
+               gpio_direction_input(OMAP_MPUIO(2));
                set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
 #ifdef CONFIG_PM
                /* share the IRQ in case someone wants to use the
@@ -425,7 +431,7 @@ static void __init osk_mistral_init(void)
                                IRQF_SHARED, "mistral_wakeup",
                                &osk_mistral_wake_interrupt);
                if (ret != 0) {
-                       omap_free_gpio(OMAP_MPUIO(2));
+                       gpio_free(OMAP_MPUIO(2));
                        printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
                                ret);
                } else
@@ -438,10 +444,8 @@ static void __init osk_mistral_init(void)
         * board, like the touchscreen, EEPROM, and wakeup (!) switch.
         */
        omap_cfg_reg(PWL);
-       if (omap_request_gpio(2) == 0) {
-               omap_set_gpio_direction(2, 0 /* out */);
-               omap_set_gpio_dataout(2, 1 /* on */);
-       }
+       if (gpio_request(2, "lcd_pwr") == 0)
+               gpio_direction_output(2, 1);
 
        platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 0cc339c1fc50823ab031657bb50ef23e6e3c821f..48cc5b060122167838d10171bf07f998ca4c8f90 100644 (file)
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -28,13 +28,6 @@
 #include <linux/spi/ads7846.h>
 #include <asm/irq.h>
 
-#ifdef CONFIG_ARM
-#include <asm/mach-types.h>
-#ifdef CONFIG_ARCH_OMAP
-#include <asm/arch/gpio.h>
-#endif
-#endif
-
 
 /*
  * This code has been heavily tested on a Nokia 770, and lightly
@@ -1183,31 +1176,6 @@ static struct spi_driver ads7846_driver = {
 
 static int __init ads7846_init(void)
 {
-       /* grr, board-specific init should stay out of drivers!! */
-
-#ifdef CONFIG_ARCH_OMAP
-       if (machine_is_omap_osk()) {
-               /* GPIO4 = PENIRQ; GPIO6 = BUSY */
-               omap_request_gpio(4);
-               omap_set_gpio_direction(4, 1);
-               omap_request_gpio(6);
-               omap_set_gpio_direction(6, 1);
-       }
-       // also TI 1510 Innovator, bitbanging through FPGA
-       // also Nokia 770
-       // also Palm Tungsten T2
-#endif
-
-       // PXA:
-       // also Dell Axim X50
-       // also HP iPaq H191x/H192x/H415x/H435x
-       // also Intel Lubbock (additional to UCB1400; as temperature sensor)
-       // also Sharp Zaurus C7xx, C8xx (corgi/sheperd/husky)
-
-       // Atmel at91sam9261-EK uses ads7843
-
-       // also various AMD Au1x00 devel boards
-
        return spi_register_driver(&ads7846_driver);
 }
 module_init(ads7846_init);
@@ -1215,14 +1183,6 @@ module_init(ads7846_init);
 static void __exit ads7846_exit(void)
 {
        spi_unregister_driver(&ads7846_driver);
-
-#ifdef CONFIG_ARCH_OMAP
-       if (machine_is_omap_osk()) {
-               omap_free_gpio(4);
-               omap_free_gpio(6);
-       }
-#endif
-
 }
 module_exit(ads7846_exit);