pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
int nents, int direction)
-Maps a scatter gather list from the block layer.
-
Returns: the number of physical segments mapped (this may be shorter
-than <nents> passed in if the block layer determines that some
-elements of the scatter/gather list are physically adjacent and thus
-may be mapped with a single entry).
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
Please note that the sg cannot be mapped again if it has been mapped once.
The mapping process is allowed to destroy information in the sg.
space, and might cause programs to fail unexpectedly.
To change the alignment trap behavior, simply echo a number into
-/proc/sys/debug/alignment. The number is made up from various bits:
+/proc/cpu/alignment. The number is made up from various bits:
bit behavior when set
--- -----------------
1.3 sparc64
1.4 ppc
1.5 SuperH
+1.6 Blackfin
2. "Policy" / "Governor"?
2.1 Policy
SH-3
SH-4
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
2. "Policy" / "Governor" ?
==========================
Caveats
=======
Features which OCFS2 does not support yet:
- - extended attributes
- quotas
- - cluster aware flock
- - cluster aware lockf
- Directory change notification (F_NOTIFY)
- Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease)
- POSIX ACLs
2.14 /proc/<pid>/io - Display the IO accounting fields
2.15 /proc/<pid>/coredump_filter - Core dump filtering settings
2.16 /proc/<pid>/mountinfo - Information about mounts
+ 2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
------------------------------------------------------------------------------
Preface
Documentation/filesystems/sharedsubtree.txt
+2.17 /proc/sys/fs/epoll - Configuration options for the epoll interface
+--------------------------------------------------------
+
+This directory contains configuration options for the epoll(7) interface.
+
+max_user_instances
+------------------
+
+This is the maximum number of epoll file descriptors that a single user can
+have open at a given time. The default value is 128, and should be enough
+for normal users.
+
+max_user_watches
+----------------
+
+Every epoll file descriptor can store a number of files to be monitored
+for event readiness. Each one of these monitored files constitutes a "watch".
+This configuration option sets the maximum number of "watches" that are
+allowed for each user.
+Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
+on a 64bit one.
+The current default value for max_user_watches is the 1/32 of the available
+low memory, divided for the "watch" cost in bytes.
+
+
------------------------------------------------------------------------------
+
archive and links it into the resulting kernel binary. By default, this
archive is empty (consuming 134 bytes on x86).
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary. This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary. This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
static struct input_dev *button_dev;
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
{
input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
input_sync(button_dev);
+ return IRQ_HANDLED;
}
static int __init button_init(void)
Bits in debug_level correspond to a level in
ACPI_DEBUG_PRINT statements, e.g.,
ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
- See Documentation/acpi/debug.txt for more information
- about debug layers and levels.
+ The debug_level mask defaults to "info". See
+ Documentation/acpi/debug.txt for more information about
+ debug layers and levels.
+ Enable processor driver info messages:
+ acpi.debug_layer=0x20000000
+ Enable PCI/PCI interrupt routing info messages:
+ acpi.debug_layer=0x400000
Enable AML "Debug" output, i.e., stores to the Debug
object while interpreting AML:
acpi.debug_layer=0xffffffff acpi.debug_level=0x2
- Enable PCI/PCI interrupt routing info messages:
- acpi.debug_layer=0x400000 acpi.debug_level=0x4
Enable all messages related to ACPI hardware:
acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
int cpu;
/* Increment the counters */
- on_each_cpu(test_each, NULL, 0, 1);
+ on_each_cpu(test_each, NULL, 1);
/* Read all the counters */
printk("Counters read from CPU %d\n", smp_processor_id());
for_each_online_cpu(cpu) {
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
+ probe_only - Only probing and no codec initialization (default=off);
+ Useful to check the initial codec status for debugging
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
Passing -1 will make the driver to choose the appropriate
value based on the controller chip.
This module supports multiple cards and autoprobe.
+ See Documentation/sound/alsa/HD-Audio.txt for more details about
+ HD-audio driver.
+
Each codec may have a model table for different configurations.
If your machine isn't listed there, the default (usually minimal)
configuration is set up. You can pass "model=<name>" option to
specify a certain model in such a case. There are different
- models depending on the codec chip.
-
- Model name Description
- ---------- -----------
- ALC880
- 3stack 3-jack in back and a headphone out
- 3stack-digout 3-jack in back, a HP out and a SPDIF out
- 5stack 5-jack in back, 2-jack in front
- 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
- 6stack 6-jack in back, 2-jack in front
- 6stack-digout 6-jack with a SPDIF out
- w810 3-jack
- z71v 3-jack (HP shared SPDIF)
- asus 3-jack (ASUS Mobo)
- asus-w1v ASUS W1V
- asus-dig ASUS with SPDIF out
- asus-dig2 ASUS with SPDIF out (using GPIO2)
- uniwill 3-jack
- fujitsu Fujitsu Laptops (Pi1536)
- F1734 2-jack
- lg LG laptop (m1 express dual)
- lg-lw LG LW20/LW25 laptop
- tcl TCL S700
- clevo Clevo laptops (m520G, m665n)
- medion Medion Rim 2150
- test for testing/debugging purpose, almost all controls can be
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC260
- hp HP machines
- hp-3013 HP machines (3013-variant)
- hp-dc7600 HP DC7600
- fujitsu Fujitsu S7020
- acer Acer TravelMate
- will Will laptops (PB V7900)
- replacer Replacer 672V
- basic fixed pin assignment (old default model)
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC262
- fujitsu Fujitsu Laptop
- hp-bpc HP xw4400/6400/8400/9400 laptops
- hp-bpc-d7000 HP BPC D7000
- hp-tc-t5735 HP Thin Client T5735
- hp-rp5700 HP RP5700
- benq Benq ED8
- benq-t31 Benq T31
- hippo Hippo (ATI) with jack detection, Sony UX-90s
- hippo_1 Hippo (Benq) with jack detection
- sony-assamd Sony ASSAMD
- toshiba-s06 Toshiba S06
- toshiba-rx1 Toshiba RX1
- ultra Samsung Q1 Ultra Vista model
- lenovo-3000 Lenovo 3000 y410
- nec NEC Versa S9100
- basic fixed pin assignment w/o SPDIF
- auto auto-config reading BIOS (default)
-
- ALC267/268
- quanta-il1 Quanta IL1 mini-notebook
- 3stack 3-stack model
- toshiba Toshiba A205
- acer Acer laptops
- acer-aspire Acer Aspire One
- dell Dell OEM laptops (Vostro 1200)
- zepto Zepto laptops
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC269
- basic Basic preset
- quanta Quanta FL1
- eeepc-p703 ASUS Eeepc P703 P900A
- eeepc-p901 ASUS Eeepc P901 S101
-
- ALC662/663
- 3stack-dig 3-stack (2-channel) with SPDIF
- 3stack-6ch 3-stack (6-channel)
- 3stack-6ch-dig 3-stack (6-channel) with SPDIF
- 6stack-dig 6-stack with SPDIF
- lenovo-101e Lenovo laptop
- eeepc-p701 ASUS Eeepc P701
- eeepc-ep20 ASUS Eeepc EP20
- ecs ECS/Foxconn mobo
- m51va ASUS M51VA
- g71v ASUS G71V
- h13 ASUS H13
- g50v ASUS G50V
- asus-mode1 ASUS
- asus-mode2 ASUS
- asus-mode3 ASUS
- asus-mode4 ASUS
- asus-mode5 ASUS
- asus-mode6 ASUS
- auto auto-config reading BIOS (default)
-
- ALC882/885
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
- arima Arima W820Di1
- targa Targa T8, MSI-1049 T8
- asus-a7j ASUS A7J
- asus-a7m ASUS A7M
- macpro MacPro support
- mbp3 Macbook Pro rev3
- imac24 iMac 24'' with jack detection
- w2jc ASUS W2JC
- auto auto-config reading BIOS (default)
-
- ALC883/888
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
- 3stack-6ch 3-jack 6-channel
- 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
- 6stack-dig-demo 6-jack digital for Intel demo board
- acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
- acer-aspire Acer Aspire 9810
- medion Medion Laptops
- medion-md2 Medion MD2
- targa-dig Targa/MSI
- targa-2ch-dig Targs/MSI with 2-channel
- laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
- lenovo-101e Lenovo 101E
- lenovo-nb0763 Lenovo NB0763
- lenovo-ms7195-dig Lenovo MS7195
- lenovo-sky Lenovo Sky
- haier-w66 Haier W66
- 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
- 6stack-dell Dell machines with 6stack (Inspiron 530)
- mitac Mitac 8252D
- clevo-m720 Clevo M720 laptop series
- fujitsu-pi2515 Fujitsu AMILO Pi2515
- 3stack-6ch-intel Intel DG33* boards
- auto auto-config reading BIOS (default)
-
- ALC861/660
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack with SPDIF I/O
- 3stack-660 3-jack (for ALC660)
- uniwill-m31 Uniwill M31 laptop
- toshiba Toshiba laptop support
- asus Asus laptop support
- asus-laptop ASUS F2/F3 laptops
- auto auto-config reading BIOS (default)
-
- ALC861VD/660VD
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF OUT
- 6stack-dig 6-jack with SPDIF OUT
- 3stack-660 3-jack (for ALC660VD)
- 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
- lenovo Lenovo 3000 C200
- dallas Dallas laptops
- hp HP TX1000
- auto auto-config reading BIOS (default)
-
- CMI9880
- minimal 3-jack in back
- min_fp 3-jack in back, 2-jack in front
- full 6-jack in back, 2-jack in front
- full_dig 6-jack in back, 2-jack in front, SPDIF I/O
- allout 5-jack in back, 2-jack in front, SPDIF out
- auto auto-config reading BIOS (default)
-
- AD1882 / AD1882A
- 3stack 3-stack mode (default)
- 6stack 6-stack mode
-
- AD1884A / AD1883 / AD1984A / AD1984B
- desktop 3-stack desktop (default)
- laptop laptop with HP jack sensing
- mobile mobile devices with HP jack sensing
- thinkpad Lenovo Thinkpad X300
-
- AD1884
- N/A
-
- AD1981
- basic 3-jack (default)
- hp HP nx6320
- thinkpad Lenovo Thinkpad T60/X60/Z60
- toshiba Toshiba U205
-
- AD1983
- N/A
-
- AD1984
- basic default configuration
- thinkpad Lenovo Thinkpad T61/X61
- dell Dell T3400
-
- AD1986A
- 6stack 6-jack, separate surrounds (default)
- 3stack 3-stack, shared surrounds
- laptop 2-channel only (FSC V2060, Samsung M50)
- laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
- laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
- ultra 2-channel with EAPD (Samsung Ultra tablet PC)
-
- AD1988/AD1988B/AD1989A/AD1989B
- 6stack 6-jack
- 6stack-dig ditto with SPDIF
- 3stack 3-jack
- 3stack-dig ditto with SPDIF
- laptop 3-jack with hp-jack automute
- laptop-dig ditto with SPDIF
- auto auto-config reading BIOS (default)
-
- Conexant 5045
- laptop-hpsense Laptop with HP sense (old model laptop)
- laptop-micsense Laptop with Mic sense (old model fujitsu)
- laptop-hpmicsense Laptop with HP and Mic senses
- benq Benq R55E
- test for testing/debugging purpose, almost all controls
- can be adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
-
- Conexant 5047
- laptop Basic Laptop config
- laptop-hp Laptop config for some HP models (subdevice 30A5)
- laptop-eapd Laptop config with EAPD support
- test for testing/debugging purpose, almost all controls
- can be adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
-
- Conexant 5051
- laptop Basic Laptop config (default)
- hp HP Spartan laptop
-
- STAC9200
- ref Reference board
- dell-d21 Dell (unknown)
- dell-d22 Dell (unknown)
- dell-d23 Dell (unknown)
- dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
- dell-m22 Dell Latitude D620, Dell Latitude D820
- dell-m23 Dell XPS M1710, Dell Precision M90
- dell-m24 Dell Latitude 120L
- dell-m25 Dell Inspiron E1505n
- dell-m26 Dell Inspiron 1501
- dell-m27 Dell Inspiron E1705/9400
- gateway Gateway laptops with EAPD control
- panasonic Panasonic CF-74
-
- STAC9205/9254
- ref Reference board
- dell-m42 Dell (unknown)
- dell-m43 Dell Precision
- dell-m44 Dell Inspiron
-
- STAC9220/9221
- ref Reference board
- 3stack D945 3stack
- 5stack D945 5stack + SPDIF
- intel-mac-v1 Intel Mac Type 1
- intel-mac-v2 Intel Mac Type 2
- intel-mac-v3 Intel Mac Type 3
- intel-mac-v4 Intel Mac Type 4
- intel-mac-v5 Intel Mac Type 5
- intel-mac-auto Intel Mac (detect type according to subsystem id)
- macmini Intel Mac Mini (equivalent with type 3)
- macbook Intel Mac Book (eq. type 5)
- macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
- macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
- imac-intel Intel iMac (eq. type 2)
- imac-intel-20 Intel iMac (newer version) (eq. type 3)
- dell-d81 Dell (unknown)
- dell-d82 Dell (unknown)
- dell-m81 Dell (unknown)
- dell-m82 Dell XPS M1210
-
- STAC9202/9250/9251
- ref Reference board, base config
- m2-2 Some Gateway MX series laptops
- m6 Some Gateway NX series laptops
- pa6 Gateway NX860 series
-
- STAC9227/9228/9229/927x
- ref Reference board
- 3stack D965 3stack
- 5stack D965 5stack + SPDIF
- dell-3stack Dell Dimension E520
- dell-bios Fixes with Dell BIOS setup
-
- STAC92HD71B*
- ref Reference board
- dell-m4-1 Dell desktops
- dell-m4-2 Dell desktops
-
- STAC92HD73*
- ref Reference board
- dell-m6 Dell desktops
-
- STAC9872
- vaio Setup for VAIO FE550G/SZ110
- vaio-ar Setup for VAIO AR
+ models depending on the codec chip. The list of available models
+ is found in HD-Audio-Models.txt
The model name "genric" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.
If the default configuration doesn't work and one of the above
- matches with your device, report it together with the PCI
- subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
+ matches with your device, report it together with alsa-info.sh
+ output (with --no-upload option) to kernel bugzilla or alsa-devel
ML (see the section "Links and Addresses").
power_save and power_save_controller options are for power-saving
* AuzenTech X-Meridian
* Bgears b-Enspirer
* Club3D Theatron DTS
- * HT-Omega Claro
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
* Razer Barracuda AC-1
* Sondigo Inferno
ALSA project homepage
http://www.alsa-project.org
- ALSA Bug Tracking System
- https://bugtrack.alsa-project.org/bugs/
+ Kernel Bugzilla
+ http://bugzilla.kernel.org/
ALSA Developers ML
mailto:alsa-devel@alsa-project.org
+
+ alsa-info.sh script
+ http://www.alsa-project.org/alsa-info.sh
--- /dev/null
+ Model name Description
+ ---------- -----------
+ALC880
+======
+ 3stack 3-jack in back and a headphone out
+ 3stack-digout 3-jack in back, a HP out and a SPDIF out
+ 5stack 5-jack in back, 2-jack in front
+ 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
+ 6stack 6-jack in back, 2-jack in front
+ 6stack-digout 6-jack with a SPDIF out
+ w810 3-jack
+ z71v 3-jack (HP shared SPDIF)
+ asus 3-jack (ASUS Mobo)
+ asus-w1v ASUS W1V
+ asus-dig ASUS with SPDIF out
+ asus-dig2 ASUS with SPDIF out (using GPIO2)
+ uniwill 3-jack
+ fujitsu Fujitsu Laptops (Pi1536)
+ F1734 2-jack
+ lg LG laptop (m1 express dual)
+ lg-lw LG LW20/LW25 laptop
+ tcl TCL S700
+ clevo Clevo laptops (m520G, m665n)
+ medion Medion Rim 2150
+ test for testing/debugging purpose, almost all controls can be
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC260
+======
+ hp HP machines
+ hp-3013 HP machines (3013-variant)
+ hp-dc7600 HP DC7600
+ fujitsu Fujitsu S7020
+ acer Acer TravelMate
+ will Will laptops (PB V7900)
+ replacer Replacer 672V
+ basic fixed pin assignment (old default model)
+ test for testing/debugging purpose, almost all controls can
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC262
+======
+ fujitsu Fujitsu Laptop
+ hp-bpc HP xw4400/6400/8400/9400 laptops
+ hp-bpc-d7000 HP BPC D7000
+ hp-tc-t5735 HP Thin Client T5735
+ hp-rp5700 HP RP5700
+ benq Benq ED8
+ benq-t31 Benq T31
+ hippo Hippo (ATI) with jack detection, Sony UX-90s
+ hippo_1 Hippo (Benq) with jack detection
+ sony-assamd Sony ASSAMD
+ toshiba-s06 Toshiba S06
+ toshiba-rx1 Toshiba RX1
+ ultra Samsung Q1 Ultra Vista model
+ lenovo-3000 Lenovo 3000 y410
+ nec NEC Versa S9100
+ basic fixed pin assignment w/o SPDIF
+ auto auto-config reading BIOS (default)
+
+ALC267/268
+==========
+ quanta-il1 Quanta IL1 mini-notebook
+ 3stack 3-stack model
+ toshiba Toshiba A205
+ acer Acer laptops
+ acer-dmic Acer laptops with digital-mic
+ acer-aspire Acer Aspire One
+ dell Dell OEM laptops (Vostro 1200)
+ zepto Zepto laptops
+ test for testing/debugging purpose, almost all controls can
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC269
+======
+ basic Basic preset
+ quanta Quanta FL1
+ eeepc-p703 ASUS Eeepc P703 P900A
+ eeepc-p901 ASUS Eeepc P901 S101
+ fujitsu FSC Amilo
+ auto auto-config reading BIOS (default)
+
+ALC662/663
+==========
+ 3stack-dig 3-stack (2-channel) with SPDIF
+ 3stack-6ch 3-stack (6-channel)
+ 3stack-6ch-dig 3-stack (6-channel) with SPDIF
+ 6stack-dig 6-stack with SPDIF
+ lenovo-101e Lenovo laptop
+ eeepc-p701 ASUS Eeepc P701
+ eeepc-ep20 ASUS Eeepc EP20
+ ecs ECS/Foxconn mobo
+ m51va ASUS M51VA
+ g71v ASUS G71V
+ h13 ASUS H13
+ g50v ASUS G50V
+ asus-mode1 ASUS
+ asus-mode2 ASUS
+ asus-mode3 ASUS
+ asus-mode4 ASUS
+ asus-mode5 ASUS
+ asus-mode6 ASUS
+ auto auto-config reading BIOS (default)
+
+ALC882/885
+==========
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack digital with SPDIF I/O
+ arima Arima W820Di1
+ targa Targa T8, MSI-1049 T8
+ asus-a7j ASUS A7J
+ asus-a7m ASUS A7M
+ macpro MacPro support
+ mbp3 Macbook Pro rev3
+ imac24 iMac 24'' with jack detection
+ w2jc ASUS W2JC
+ auto auto-config reading BIOS (default)
+
+ALC883/888
+==========
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack digital with SPDIF I/O
+ 3stack-6ch 3-jack 6-channel
+ 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
+ 6stack-dig-demo 6-jack digital for Intel demo board
+ acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
+ acer-aspire Acer Aspire 9810
+ acer-aspire-4930g Acer Aspire 4930G
+ medion Medion Laptops
+ medion-md2 Medion MD2
+ targa-dig Targa/MSI
+ targa-2ch-dig Targs/MSI with 2-channel
+ laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
+ lenovo-101e Lenovo 101E
+ lenovo-nb0763 Lenovo NB0763
+ lenovo-ms7195-dig Lenovo MS7195
+ lenovo-sky Lenovo Sky
+ haier-w66 Haier W66
+ 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
+ 6stack-dell Dell machines with 6stack (Inspiron 530)
+ mitac Mitac 8252D
+ clevo-m720 Clevo M720 laptop series
+ fujitsu-pi2515 Fujitsu AMILO Pi2515
+ fujitsu-xa3530 Fujitsu AMILO XA3530
+ 3stack-6ch-intel Intel DG33* boards
+ auto auto-config reading BIOS (default)
+
+ALC861/660
+==========
+ 3stack 3-jack
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack with SPDIF I/O
+ 3stack-660 3-jack (for ALC660)
+ uniwill-m31 Uniwill M31 laptop
+ toshiba Toshiba laptop support
+ asus Asus laptop support
+ asus-laptop ASUS F2/F3 laptops
+ auto auto-config reading BIOS (default)
+
+ALC861VD/660VD
+==============
+ 3stack 3-jack
+ 3stack-dig 3-jack with SPDIF OUT
+ 6stack-dig 6-jack with SPDIF OUT
+ 3stack-660 3-jack (for ALC660VD)
+ 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
+ lenovo Lenovo 3000 C200
+ dallas Dallas laptops
+ hp HP TX1000
+ asus-v1s ASUS V1Sn
+ auto auto-config reading BIOS (default)
+
+CMI9880
+=======
+ minimal 3-jack in back
+ min_fp 3-jack in back, 2-jack in front
+ full 6-jack in back, 2-jack in front
+ full_dig 6-jack in back, 2-jack in front, SPDIF I/O
+ allout 5-jack in back, 2-jack in front, SPDIF out
+ auto auto-config reading BIOS (default)
+
+AD1882 / AD1882A
+================
+ 3stack 3-stack mode (default)
+ 6stack 6-stack mode
+
+AD1884A / AD1883 / AD1984A / AD1984B
+====================================
+ desktop 3-stack desktop (default)
+ laptop laptop with HP jack sensing
+ mobile mobile devices with HP jack sensing
+ thinkpad Lenovo Thinkpad X300
+
+AD1884
+======
+ N/A
+
+AD1981
+======
+ basic 3-jack (default)
+ hp HP nx6320
+ thinkpad Lenovo Thinkpad T60/X60/Z60
+ toshiba Toshiba U205
+
+AD1983
+======
+ N/A
+
+AD1984
+======
+ basic default configuration
+ thinkpad Lenovo Thinkpad T61/X61
+ dell Dell T3400
+
+AD1986A
+=======
+ 6stack 6-jack, separate surrounds (default)
+ 3stack 3-stack, shared surrounds
+ laptop 2-channel only (FSC V2060, Samsung M50)
+ laptop-eapd 2-channel with EAPD (ASUS A6J)
+ laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
+ ultra 2-channel with EAPD (Samsung Ultra tablet PC)
+ samsung 2-channel with EAPD (Samsung R65)
+
+AD1988/AD1988B/AD1989A/AD1989B
+==============================
+ 6stack 6-jack
+ 6stack-dig ditto with SPDIF
+ 3stack 3-jack
+ 3stack-dig ditto with SPDIF
+ laptop 3-jack with hp-jack automute
+ laptop-dig ditto with SPDIF
+ auto auto-config reading BIOS (default)
+
+Conexant 5045
+=============
+ laptop-hpsense Laptop with HP sense (old model laptop)
+ laptop-micsense Laptop with Mic sense (old model fujitsu)
+ laptop-hpmicsense Laptop with HP and Mic senses
+ benq Benq R55E
+ test for testing/debugging purpose, almost all controls
+ can be adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+
+Conexant 5047
+=============
+ laptop Basic Laptop config
+ laptop-hp Laptop config for some HP models (subdevice 30A5)
+ laptop-eapd Laptop config with EAPD support
+ test for testing/debugging purpose, almost all controls
+ can be adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+
+Conexant 5051
+=============
+ laptop Basic Laptop config (default)
+ hp HP Spartan laptop
+
+STAC9200
+========
+ ref Reference board
+ dell-d21 Dell (unknown)
+ dell-d22 Dell (unknown)
+ dell-d23 Dell (unknown)
+ dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
+ dell-m22 Dell Latitude D620, Dell Latitude D820
+ dell-m23 Dell XPS M1710, Dell Precision M90
+ dell-m24 Dell Latitude 120L
+ dell-m25 Dell Inspiron E1505n
+ dell-m26 Dell Inspiron 1501
+ dell-m27 Dell Inspiron E1705/9400
+ gateway Gateway laptops with EAPD control
+ panasonic Panasonic CF-74
+
+STAC9205/9254
+=============
+ ref Reference board
+ dell-m42 Dell (unknown)
+ dell-m43 Dell Precision
+ dell-m44 Dell Inspiron
+
+STAC9220/9221
+=============
+ ref Reference board
+ 3stack D945 3stack
+ 5stack D945 5stack + SPDIF
+ intel-mac-v1 Intel Mac Type 1
+ intel-mac-v2 Intel Mac Type 2
+ intel-mac-v3 Intel Mac Type 3
+ intel-mac-v4 Intel Mac Type 4
+ intel-mac-v5 Intel Mac Type 5
+ intel-mac-auto Intel Mac (detect type according to subsystem id)
+ macmini Intel Mac Mini (equivalent with type 3)
+ macbook Intel Mac Book (eq. type 5)
+ macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
+ macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
+ imac-intel Intel iMac (eq. type 2)
+ imac-intel-20 Intel iMac (newer version) (eq. type 3)
+ dell-d81 Dell (unknown)
+ dell-d82 Dell (unknown)
+ dell-m81 Dell (unknown)
+ dell-m82 Dell XPS M1210
+
+STAC9202/9250/9251
+==================
+ ref Reference board, base config
+ m2-2 Some Gateway MX series laptops
+ m6 Some Gateway NX series laptops
+ pa6 Gateway NX860 series
+
+STAC9227/9228/9229/927x
+=======================
+ ref Reference board
+ ref-no-jd Reference board without HP/Mic jack detection
+ 3stack D965 3stack
+ 5stack D965 5stack + SPDIF
+ dell-3stack Dell Dimension E520
+ dell-bios Fixes with Dell BIOS setup
+
+STAC92HD71B*
+============
+ ref Reference board
+ dell-m4-1 Dell desktops
+ dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
+
+STAC92HD73*
+===========
+ ref Reference board
+ no-jd BIOS setup but without jack-detection
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
+
+STAC92HD83*
+===========
+ ref Reference board
+
+STAC9872
+========
+ vaio Setup for VAIO FE550G/SZ110
+ vaio-ar Setup for VAIO AR
--- /dev/null
+MORE NOTES ON HD-AUDIO DRIVER
+=============================
+ Takashi Iwai <tiwai@suse.de>
+
+
+GENERAL
+-------
+
+HD-audio is the new standard on-board audio component on modern PCs
+after AC97. Although Linux has been supporting HD-audio since long
+time ago, there are often problems with new machines. A part of the
+problem is broken BIOS, and the rest is the driver implementation.
+This document explains the brief trouble-shooting and debugging
+methods for the HD-audio hardware.
+
+The HD-audio component consists of two parts: the controller chip and
+the codec chips on the HD-audio bus. Linux provides a single driver
+for all controllers, snd-hda-intel. Although the driver name contains
+a word of a well-known harware vendor, it's not specific to it but for
+all controller chips by other companies. Since the HD-audio
+controllers are supposed to be compatible, the single snd-hda-driver
+should work in most cases. But, not surprisingly, there are known
+bugs and issues specific to each controller type. The snd-hda-intel
+driver has a bunch of workarounds for these as described below.
+
+A controller may have multiple codecs. Usually you have one audio
+codec and optionally one modem codec. In theory, there might be
+multiple audio codecs, e.g. for analog and digital outputs, and the
+driver might not work properly because of conflict of mixer elements.
+This should be fixed in future if such hardware really exists.
+
+The snd-hda-intel driver has several different codec parsers depending
+on the codec. It has a generic parser as a fallback, but this
+functionality is fairly limited until now. Instead of the generic
+parser, usually the codec-specific parser (coded in patch_*.c) is used
+for the codec-specific implementations. The details about the
+codec-specific problems are explained in the later sections.
+
+If you are interested in the deep debugging of HD-audio, read the
+HD-audio specification at first. The specification is found on
+Intel's web page, for example:
+
+- http://www.intel.com/standards/hdaudio/
+
+
+HD-AUDIO CONTROLLER
+-------------------
+
+DMA-Position Problem
+~~~~~~~~~~~~~~~~~~~~
+The most common problem of the controller is the inaccurate DMA
+pointer reporting. The DMA pointer for playback and capture can be
+read in two ways, either via a LPIB register or via a position-buffer
+map. As default the driver tries to read from the io-mapped
+position-buffer, and falls back to LPIB if the position-buffer appears
+dead. However, this detection isn't perfect on some devices. In such
+a case, you can change the default method via `position_fix` option.
+
+`position_fix=1` means to use LPIB method explicitly.
+`position_fix=2` means to use the position-buffer. 0 is the default
+value, the automatic check and fallback to LPIB as described in the
+above. If you get a problem of repeated sounds, this option might
+help.
+
+In addition to that, every controller is known to be broken regarding
+the wake-up timing. It wakes up a few samples before actually
+processing the data on the buffer. This caused a lot of problems, for
+example, with ALSA dmix or JACK. Since 2.6.27 kernel, the driver puts
+an artificial delay to the wake up timing. This delay is controlled
+via `bdl_pos_adj` option.
+
+When `bdl_pos_adj` is a negative value (as default), it's assigned to
+an appropriate value depending on the controller chip. For Intel
+chips, it'd be 1 while it'd be 32 for others. Usually this works.
+Only in case it doesn't work and you get warning messages, you should
+change this parameter to other values.
+
+
+Codec-Probing Problem
+~~~~~~~~~~~~~~~~~~~~~
+A less often but a more severe problem is the codec probing. When
+BIOS reports the available codec slots wrongly, the driver gets
+confused and tries to access the non-existing codec slot. This often
+results in the total screw-up, and destructs the further communication
+with the codec chips. The symptom appears usually as error messages
+like:
+------------------------------------------------------------------------
+ hda_intel: azx_get_response timeout, switching to polling mode:
+ last cmd=0x12345678
+ hda_intel: azx_get_response timeout, switching to single_cmd mode:
+ last cmd=0x12345678
+------------------------------------------------------------------------
+
+The first line is a warning, and this is usually relatively harmless.
+It means that the codec response isn't notified via an IRQ. The
+driver uses explicit polling method to read the response. It gives
+very slight CPU overhead, but you'd unlikely notice it.
+
+The second line is, however, a fatal error. If this happens, usually
+it means that something is really wrong. Most likely you are
+accessing a non-existing codec slot.
+
+Thus, if the second error message appears, try to narrow the probed
+codec slots via `probe_mask` option. It's a bitmask, and each bit
+corresponds to the codec slot. For example, to probe only the first
+slot, pass `probe_mask=1`. For the first and the third slots, pass
+`probe_mask=5` (where 5 = 1 | 4), and so on.
+
+Since 2.6.29 kernel, the driver has a more robust probing method, so
+this error might happen rarely, though.
+
+
+Interrupt Handling
+~~~~~~~~~~~~~~~~~~
+In rare but some cases, the interrupt isn't properly handled as
+default. You would notice this by the DMA transfer error reported by
+ALSA PCM core, for example. Using MSI might help in such a case.
+Pass `enable_msi=1` option for enabling MSI.
+
+
+HD-AUDIO CODEC
+--------------
+
+Model Option
+~~~~~~~~~~~~
+The most common problem regarding the HD-audio driver is the
+unsupported codec features or the mismatched device configuration.
+Most of codec-specific code has several preset models, either to
+override the BIOS setup or to provide more comprehensive features.
+
+The driver checks PCI SSID and looks through the static configuration
+table until any matching entry is found. If you have a new machine,
+you may see a message like below:
+------------------------------------------------------------------------
+ hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
+------------------------------------------------------------------------
+Even if you see such a message, DON'T PANIC. Take a deep breath and
+keep your towel. First of all, it's an informational message, no
+warning, no error. This means that the PCI SSID of your device isn't
+listed in the known preset model (white-)list. But, this doesn't mean
+that the driver is broken. Many codec-drivers provide the automatic
+configuration mechanism based on the BIOS setup.
+
+The HD-audio codec has usually "pin" widgets, and BIOS sets the default
+configuration of each pin, which indicates the location, the
+connection type, the jack color, etc. The HD-audio driver can guess
+the right connection judging from these default configuration values.
+However -- some codec-support codes, such as patch_analog.c, don't
+support the automatic probing (yet as of 2.6.28). And, BIOS is often,
+yes, pretty often broken. It sets up wrong values and screws up the
+driver.
+
+The preset model is provided basically to overcome such a situation.
+When the matching preset model is found in the white-list, the driver
+assumes the static configuration of that preset and builds the mixer
+elements and PCM streams based on the static information. Thus, if
+you have a newer machine with a slightly different PCI SSID from the
+existing one, you may have a good chance to re-use the same model.
+You can pass the `model` option to specify the preset model instead of
+PCI SSID look-up.
+
+What `model` option values are available depends on the codec chip.
+Check your codec chip from the codec proc file (see "Codec Proc-File"
+section below). It will show the vendor/product name of your codec
+chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+the section of HD-audio driver. You can find a list of codecs
+and `model` options belonging to each codec. For example, for Realtek
+ALC262 codec chip, pass `model=ultra` for devices that are compatible
+with Samsung Q1 Ultra.
+
+Thus, the first thing you can do for any brand-new, unsupported and
+non-working HD-audio hardware is to check HD-audio codec and several
+different `model` option values. If you have a luck, some of them
+might suit with your device well.
+
+Some codecs such as ALC880 have a special model option `model=test`.
+This configures the driver to provide as many mixer controls as
+possible for every single pin feature except for the unsolicited
+events (and maybe some other specials). Adjust each mixer element and
+try the I/O in the way of trial-and-error until figuring out the whole
+I/O pin mappings.
+
+Note that `model=generic` has a special meaning. It means to use the
+generic parser regardless of the codec. Usually the codec-specific
+parser is much better than the generic parser (as now). Thus this
+option is more about the debugging purpose.
+
+
+Speaker and Headphone Output
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+One of the most frequent (and obvious) bugs with HD-audio is the
+silent output from either or both of a built-in speaker and a
+headphone jack. In general, you should try a headphone output at
+first. A speaker output often requires more additional controls like
+the external amplifier bits. Thus a headphone output has a slightly
+better chance.
+
+Before making a bug report, double-check whether the mixer is set up
+correctly. The recent version of snd-hda-intel driver provides mostly
+"Master" volume control as well as "Front" volume (where Front
+indicates the front-channels). In addition, there can be individual
+"Headphone" and "Speaker" controls.
+
+Ditto for the speaker output. There can be "External Amplifier"
+switch on some codecs. Turn on this if present.
+
+Another related problem is the automatic mute of speaker output by
+headphone plugging. This feature is implemented in most cases, but
+not on every preset model or codec-support code.
+
+In anyway, try a different model option if you have such a problem.
+Some other models may match better and give you more matching
+functionality. If none of the available models works, send a bug
+report. See the bug report section for details.
+
+If you are masochistic enough to debug the driver problem, note the
+following:
+
+- The speaker (and the headphone, too) output often requires the
+ external amplifier. This can be set usually via EAPD verb or a
+ certain GPIO. If the codec pin supports EAPD, you have a better
+ chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly
+ it's either GPIO0 or GPIO1) may turn on/off EAPD.
+- Some Realtek codecs require special vendor-specific coefficients to
+ turn on the amplifier. See patch_realtek.c.
+- IDT codecs may have extra power-enable/disable controls on each
+ analog pin. See patch_sigmatel.c.
+- Very rare but some devices don't accept the pin-detection verb until
+ triggered. Issuing GET_PIN_SENSE verb (0xf09) may result in the
+ codec-communication stall. Some examples are found in
+ patch_realtek.c.
+
+
+Capture Problems
+~~~~~~~~~~~~~~~~
+The capture problems are often because of missing setups of mixers.
+Thus, before submitting a bug report, make sure that you set up the
+mixer correctly. For example, both "Capture Volume" and "Capture
+Switch" have to be set properly in addition to the right "Capture
+Source" or "Input Source" selection. Some devices have "Mic Boost"
+volume or switch.
+
+When the PCM device is opened via "default" PCM (without pulse-audio
+plugin), you'll likely have "Digital Capture Volume" control as well.
+This is provided for the extra gain/attenuation of the signal in
+software, especially for the inputs without the hardware volume
+control such as digital microphones. Unless really needed, this
+should be set to exactly 50%, corresponding to 0dB -- neither extra
+gain nor attenuation. When you use "hw" PCM, i.e., a raw access PCM,
+this control will have no influence, though.
+
+It's known that some codecs / devices have fairly bad analog circuits,
+and the recorded sound contains a certain DC-offset. This is no bug
+of the driver.
+
+Most of modern laptops have no analog CD-input connection. Thus, the
+recording from CD input won't work in many cases although the driver
+provides it as the capture source. Use CDDA instead.
+
+The automatic switching of the built-in and external mic per plugging
+is implemented on some codec models but not on every model. Partly
+because of my laziness but mostly lack of testers. Feel free to
+submit the improvement patch to the author.
+
+
+Direct Debugging
+~~~~~~~~~~~~~~~~
+If no model option gives you a better result, and you are a tough guy
+to fight against evil, try debugging via hitting the raw HD-audio
+codec verbs to the device. Some tools are available: hda-emu and
+hda-analyzer. The detailed description is found in the sections
+below. You'd need to enable hwdep for using these tools. See "Kernel
+Configuration" section.
+
+
+OTHER ISSUES
+------------
+
+Kernel Configuration
+~~~~~~~~~~~~~~~~~~~~
+In general, I recommend you to enable the sound debug option,
+`CONFIG_SND_DEBUG=y`, no matter whether you are debugging or not.
+This enables snd_printd() macro and others, and you'll get additional
+kernel messages at probing.
+
+In addition, you can enable `CONFIG_SND_DEBUG_VERBOSE=y`. But this
+will give you far more messages. Thus turn this on only when you are
+sure to want it.
+
+Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*`
+options. Note that each of them corresponds to the codec chip, not
+the controller chip. Thus, even if lspci shows the Nvidia controller,
+you may need to choose the option for other vendors. If you are
+unsure, just select all yes.
+
+`CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver.
+When this is enabled, the driver creates hardware-dependent devices
+(one per each codec), and you have a raw access to the device via
+these device files. For example, `hwC0D2` will be created for the
+codec slot #2 of the first card (#0). For debug-tools such as
+hda-verb and hda-analyzer, the hwdep device has to be enabled.
+Thus, it'd be better to turn this on always.
+
+`CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the
+hwdep option above. When enabled, you'll have some sysfs files under
+the corresponding hwdep directory. See "HD-audio reconfiguration"
+section below.
+
+`CONFIG_SND_HDA_POWER_SAVE` option enables the power-saving feature.
+See "Power-saving" section below.
+
+
+Codec Proc-File
+~~~~~~~~~~~~~~~
+The codec proc-file is a treasure-chest for debugging HD-audio.
+It shows most of useful information of each codec widget.
+
+The proc file is located in /proc/asound/card*/codec#*, one file per
+each codec slot. You can know the codec vendor, product id and
+names, the type of each widget, capabilities and so on.
+This file, however, doesn't show the jack sensing state, so far. This
+is because the jack-sensing might be depending on the trigger state.
+
+This file will be picked up by the debug tools, and also it can be fed
+to the emulator as the primary codec information. See the debug tools
+section below.
+
+This proc file can be also used to check whether the generic parser is
+used. When the generic parser is used, the vendor/product ID name
+will appear as "Realtek ID 0262", instead of "Realtek ALC262".
+
+
+HD-Audio Reconfiguration
+~~~~~~~~~~~~~~~~~~~~~~~~
+This is an experimental feature to allow you re-configure the HD-audio
+codec dynamically without reloading the driver. The following sysfs
+files are available under each codec-hwdep device directory (e.g.
+/sys/class/sound/hwC0D0):
+
+vendor_id::
+ Shows the 32bit codec vendor-id hex number. You can change the
+ vendor-id value by writing to this file.
+subsystem_id::
+ Shows the 32bit codec subsystem-id hex number. You can change the
+ subsystem-id value by writing to this file.
+revision_id::
+ Shows the 32bit codec revision-id hex number. You can change the
+ revision-id value by writing to this file.
+afg::
+ Shows the AFG ID. This is read-only.
+mfg::
+ Shows the MFG ID. This is read-only.
+name::
+ Shows the codec name string. Can be changed by writing to this
+ file.
+modelname::
+ Shows the currently set `model` option. Can be changed by writing
+ to this file.
+init_verbs::
+ The extra verbs to execute at initialization. You can add a verb by
+ writing to this file. Pass tree numbers, nid, verb and parameter.
+hints::
+ Shows hint strings for codec parsers for any use. Right now it's
+ not used.
+reconfig::
+ Triggers the codec re-configuration. When any value is written to
+ this file, the driver re-initialize and parses the codec tree
+ again. All the changes done by the sysfs entries above are taken
+ into account.
+clear::
+ Resets the codec, removes the mixer elements and PCM stuff of the
+ specified codec, and clear all init verbs and hints.
+
+
+Power-Saving
+~~~~~~~~~~~~
+The power-saving is a kind of auto-suspend of the device. When the
+device is inactive for a certain time, the device is automatically
+turned off to save the power. The time to go down is specified via
+`power_save` module option, and this option can be changed dynamically
+via sysfs.
+
+The power-saving won't work when the analog loopback is enabled on
+some codecs. Make sure that you mute all unneeded signal routes when
+you want the power-saving.
+
+The power-saving feature might cause audible click noises at each
+power-down/up depending on the device. Some of them might be
+solvable, but some are hard, I'm afraid. Some distros such as
+openSUSE enables the power-saving feature automatically when the power
+cable is unplugged. Thus, if you hear noises, suspect first the
+power-saving. See /sys/module/snd_hda_intel/parameters/power_save to
+check the current value. If it's non-zero, the feature is turned on.
+
+
+Development Tree
+~~~~~~~~~~~~~~~~
+The latest development codes for HD-audio are found on sound git tree:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+
+The master branch or for-next branches can be used as the main
+development branches in general while the HD-audio specific patches
+are committed in topic/hda branch.
+
+If you are using the latest Linus tree, it'd be better to pull the
+above GIT tree onto it. If you are using the older kernels, an easy
+way to try the latest ALSA code is to build from the snapshot
+tarball. There are daily tarballs and the latest snapshot tarball.
+All can be built just like normal alsa-driver release packages, that
+is, installed via the usual spells: configure, make and make
+install(-modules). See INSTALL in the package. The snapshot tarballs
+are found at:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+
+
+Sending a Bug Report
+~~~~~~~~~~~~~~~~~~~~
+If any model or module options don't work for your device, it's time
+to send a bug report to the developers. Give the following in your
+bug report:
+
+- Hardware vendor, product and model names
+- Kernel version (and ALSA-driver version if you built externally)
+- `alsa-info.sh` output; run with `--no-upload` option. See the
+ section below about alsa-info
+
+If it's a regression, at best, send alsa-info outputs of both working
+and non-working kernels. This is really helpful because we can
+compare the codec registers directly.
+
+Send a bug report either the followings:
+
+kernel-bugzilla::
+ http://bugme.linux-foundation.org/
+alsa-devel ML::
+ alsa-devel@alsa-project.org
+
+
+DEBUG TOOLS
+-----------
+
+This section describes some tools available for debugging HD-audio
+problems.
+
+alsa-info
+~~~~~~~~~
+The script `alsa-info.sh` is a very useful tool to gather the audio
+device information. You can fetch the latest version from:
+
+- http://www.alsa-project.org/alsa-info.sh
+
+Run this script as root, and it will gather the important information
+such as the module lists, module parameters, proc file contents
+including the codec proc files, mixer outputs and the control
+elements. As default, it will store the information onto a web server
+on alsa-project.org. But, if you send a bug report, it'd be better to
+run with `--no-upload` option, and attach the generated file.
+
+There are some other useful options. See `--help` option output for
+details.
+
+
+hda-verb
+~~~~~~~~
+hda-verb is a tiny program that allows you to access the HD-audio
+codec directly. You can execute a raw HD-audio codec verb with this.
+This program accesses the hwdep device, thus you need to enable the
+kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand.
+
+The hda-verb program takes four arguments: the hwdep device file, the
+widget NID, the verb and the parameter. When you access to the codec
+on the slot 2 of the card 0, pass /dev/snd/hwC0D2 to the first
+argument, typically. (However, the real path name depends on the
+system.)
+
+The second parameter is the widget number-id to access. The third
+parameter can be either a hex/digit number or a string corresponding
+to a verb. Similarly, the last parameter is the value to write, or
+can be a string for the parameter type.
+
+------------------------------------------------------------------------
+ % hda-verb /dev/snd/hwC0D0 0x12 0x701 2
+ nid = 0x12, verb = 0x701, param = 0x2
+ value = 0x0
+
+ % hda-verb /dev/snd/hwC0D0 0x0 PARAMETERS VENDOR_ID
+ nid = 0x0, verb = 0xf00, param = 0x0
+ value = 0x10ec0262
+
+ % hda-verb /dev/snd/hwC0D0 2 set_a 0xb080
+ nid = 0x2, verb = 0x300, param = 0xb080
+ value = 0x0
+------------------------------------------------------------------------
+
+Although you can issue any verbs with this program, the driver state
+won't be always updated. For example, the volume values are usually
+cached in the driver, and thus changing the widget amp value directly
+via hda-verb won't change the mixer value.
+
+The hda-verb program is found in the ftp directory:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+
+Also a git repository is available:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-verb.git
+
+See README file in the tarball for more details about hda-verb
+program.
+
+
+hda-analyzer
+~~~~~~~~~~~~
+hda-analyzer provides a graphical interface to access the raw HD-audio
+control, based on pyGTK2 binding. It's a more powerful version of
+hda-verb. The program gives you an easy-to-use GUI stuff for showing
+the widget information and adjusting the amp values, as well as the
+proc-compatible output.
+
+The hda-analyzer is a part of alsa.git repository in
+alsa-project.org:
+
+- http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer
+
+
+Codecgraph
+~~~~~~~~~~
+Codecgraph is a utility program to generate a graph and visualizes the
+codec-node connection of a codec chip. It's especially useful when
+you analyze or debug a codec without a proper datasheet. The program
+parses the given codec proc file and converts to SVG via graphiz
+program.
+
+The tarball and GIT trees are found in the web page at:
+
+- http://helllabs.org/codecgraph/
+
+
+hda-emu
+~~~~~~~
+hda-emu is an HD-audio emulator. The main purpose of this program is
+to debug an HD-audio codec without the real hardware. Thus, it
+doesn't emulate the behavior with the real audio I/O, but it just
+dumps the codec register changes and the ALSA-driver internal changes
+at probing and operating the HD-audio driver.
+
+The program requires a codec proc-file to simulate. Get a proc file
+for the target codec beforehand, or pick up an example codec from the
+codec proc collections in the tarball. Then, run the program with the
+proc file, and the hda-emu program will start parsing the codec file
+and simulates the HD-audio driver:
+
+------------------------------------------------------------------------
+ % hda-emu codecs/stac9200-dell-d820-laptop
+ # Parsing..
+ hda_codec: Unknown model for STAC9200, using BIOS defaults
+ hda_codec: pin nid 08 bios pin config 40c003fa
+ ....
+------------------------------------------------------------------------
+
+The program gives you only a very dumb command-line interface. You
+can get a proc-file dump at the current state, get a list of control
+(mixer) elements, set/get the control element value, simulate the PCM
+operation, the jack plugging simulation, etc.
+
+The package is found in:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+
+A git repository is available:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-emu.git
+
+See README file in the tarball for more details about hda-emu
+program.
Shows the general codec information and the attribute of each
widget node.
+card*/eld#*
+ Available for HDMI or DisplayPort interfaces.
+ Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink,
+ and describes its audio capabilities and configurations.
+
+ Some ELD fields may be modified by doing `echo name hex_value > eld#*`.
+ Only do this if you are sure the HDMI sink provided value is wrong.
+ And if that makes your HDMI audio work, please report to us so that we
+ can fix it in future kernel releases.
+
Sequencer Information
---------------------
the following struct:-
/* SoC machine */
-struct snd_soc_machine {
+struct snd_soc_card {
char *name;
int (*probe)(struct platform_device *pdev);
.ops = &corgi_ops,
};
-struct snd_soc_machine then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with it's DAIs. e.g.
/* corgi audio machine driver */
-static struct snd_soc_machine snd_soc_machine_corgi = {
+static struct snd_soc_card snd_soc_corgi = {
.name = "Corgi",
.dai_link = &corgi_dai,
.num_links = 1,
/* corgi audio subsystem */
static struct snd_soc_device corgi_snd_devdata = {
- .machine = &snd_soc_machine_corgi,
+ .machine = &snd_soc_corgi,
.platform = &pxa2xx_soc_platform,
.codec_dev = &soc_codec_dev_wm8731,
.codec_data = &corgi_wm8731_setup,
/* if your mach-* infrastructure doesn't support kernels that can
* run on multiple boards, pdata wouldn't benefit from "__init".
*/
- static struct mysoc_spi_data __init pdata = { ... };
+ static struct mysoc_spi_data __initdata pdata = { ... };
static __init board_init(void)
{
$ cat /debug/tracing/trace_pipe > mydump.txt &
Start X or whatever.
$ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
Check for lost events.
do.
Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
pressing ctrl+c.
$ cat /debug/tracing/trace_entries
gives you a number. Approximately double this number and write it back, for
instance:
+$ echo 0 > /debug/tracing/tracing_enabled
$ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
Then start again from the top.
If you are doing a trace for a driver project, e.g. Nouveau, you should also
Then you must load the gadget serial driver. To load it as an
ACM device (recommended for interoperability), do this:
- modprobe g_serial use_acm=1
+ modprobe g_serial
To load it as a vendor specific bulk in/out device, do this:
- modprobe g_serial
+ modprobe g_serial use_acm=0
This will also automatically load the underlying gadget peripheral
controller driver. This must be done each time you reboot the gadget
These files can be read as binary data. The binary data consists
of first the device descriptor, then the descriptors for each
-configuration of the device. That information is also shown in
-text form by the /proc/bus/usb/devices file, described later.
+configuration of the device. Multi-byte fields in the device and
+configuration descriptors, but not other descriptors, are converted
+to host endianness by the kernel. This information is also shown
+in text form by the /proc/bus/usb/devices file, described later.
These files may also be used to write user-level drivers for the USB
devices. You would open the /proc/bus/usb/BBB/DDD file read/write,
Verify that bus sockets are present.
# ls /sys/kernel/debug/usbmon
-0s 0t 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
+0s 0u 1s 1t 1u 2s 2t 2u 3s 3t 3u 4s 4t 4u
#
-Now you can choose to either use the sockets numbered '0' (to capture packets on
-all buses), and skip to step #3, or find the bus used by your device with step #2.
+Now you can choose to either use the socket '0u' (to capture packets on all
+buses), and skip to step #3, or find the bus used by your device with step #2.
+This allows to filter away annoying devices that talk continuously.
2. Find which bus connects to the desired device
Here is the list of words, from left to right:
-- URB Tag. This is used to identify URBs is normally a kernel mode address
- of the URB structure in hexadecimal.
+- URB Tag. This is used to identify URBs, and is normally an in-kernel address
+ of the URB structure in hexadecimal, but can be a sequence number or any
+ other unique string, within reason.
- Timestamp in microseconds, a decimal number. The timestamp's resolution
depends on available clock, and so it can be much worse than a microsecond
P: Chas Williams
M: chas@cmf.nrl.navy.mil
L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
S: Maintained
ECRYPT FILE SYSTEM
-P: Mike Halcrow, Phillip Hellewell
-M: mhalcrow@us.ibm.com, phillip@hellewell.homeip.net
-L: ecryptfs-devel@lists.sourceforge.net
-W: http://ecryptfs.sourceforge.net/
+P: Tyler Hicks, Dustin Kirkland
+M: tyhicks@linux.vnet.ibm.com, kirkland@canonical.com
+L: ecryptfs-devel@lists.launchpad.net
+W: https://launchpad.net/ecryptfs
S: Supported
EDAC-CORE
INOTIFY
P: John McCutchan
-M: ttb@tentacle.dhs.org
+M: john@johnmccutchan.com
P: Robert Love
-M: rml@novell.com
+M: rlove@rlove.org
L: linux-kernel@vger.kernel.org
S: Maintained
L: sdhci-devel@list.drzeus.cx
S: Maintained
+SECURITY SUBSYSTEM
+F: security/
+P: James Morris
+M: jmorris@namei.org
+L: linux-kernel@vger.kernel.org
+L: linux-security-module@vger.kernel.org (suggested Cc:)
+T: git kernel.org:pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+S: Supported
+
SECURITY CONTACT
P: Security Officers
M: security@kernel.org
L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
-SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
+SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
P: Liam Girdwood
M: lrg@slimlogic.co.uk
P: Mark Brown
P: Adrian Hunter
M: ext-adrian.hunter@nokia.com
L: linux-mtd@lists.infradead.org
-T: git git://git.infradead.org/~dedekind/ubifs-2.6.git
+T: git git://git.infradead.org/ubifs-2.6.git
W: http://www.linux-mtd.infradead.org/doc/ubifs.html
S: Maintained
M: dedekind@infradead.org
W: http://www.linux-mtd.infradead.org/
L: linux-mtd@lists.infradead.org
-T: git git://git.infradead.org/~dedekind/ubi-2.6.git
+T: git git://git.infradead.org/ubi-2.6.git
S: Maintained
USB ACM DRIVER
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linux-uvc-devel@lists.berlios.de
+L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc6
-NAME = Killer Bat of Doom
+EXTRAVERSION =
+NAME = Erotic Pickled Herring
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# task_pt_regs() in asm/processor.h or asm/ptrace.h
# arch_has_single_step() if there is hardware single-step support
# arch_has_block_step() if there is hardware block-step support
-# arch_ptrace() and not #define __ARCH_SYS_PTRACE
-# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE
# asm/syscall.h supplying asm-generic/syscall.h interface
# linux/regset.h user_regset interfaces
# CORE_DUMP_USE_REGSET #define'd in linux/elf.h
return PCI_SLOT(dev->devfn);
}
-void __devinit
+void
pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
struct resource *res)
{
/*
* Where secondaries begin a life of C.
*/
-void __init
+void __cpuinit
smp_callin(void)
{
int cpuid = hard_smp_processor_id();
* Send a message to a secondary's console. "START" is one such
* interesting message. ;-)
*/
-static void __init
+static void __cpuinit
send_secondary_console_msg(char *str, int cpuid)
{
struct percpu_struct *cpu;
/*
* Convince the console to have a secondary cpu begin execution.
*/
-static int __init
+static int __cpuinit
secondary_cpu_start(int cpuid, struct task_struct *idle)
{
struct percpu_struct *cpu;
static int opDEC_fix;
-static void __init
+static void __cpuinit
opDEC_check(void)
{
__asm__ __volatile__ (
return;
}
-void __init
+void __cpuinit
trap_init(void)
{
/* Tell PAL-code what global pointer we want in the kernel. */
return -ENOMEM;
sachip->clk = clk_get(me, "SA1111_CLK");
- if (!sachip->clk) {
+ if (IS_ERR(sachip->clk)) {
ret = PTR_ERR(sachip->clk);
goto err_free;
}
# CONFIG_MACH_AKITA is not set
# CONFIG_MACH_SPITZ is not set
# CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
# CONFIG_ARCH_VIPER is not set
# CONFIG_ARCH_PXA_ESERIES is not set
# CONFIG_TRIZEPS_PXA is not set
#if __LINUX_ARM_ARCH__ < 5
#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/__ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/ffs.h>
* the clz instruction for much better code efficiency.
*/
-#define __fls(x) \
- ( __builtin_constant_p(x) ? constant_fls(x) : \
- ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
-
-/* Implement fls() in C so that 64-bit args are suitably truncated */
static inline int fls(int x)
{
- return __fls(x);
+ int ret;
+
+ if (__builtin_constant_p(x))
+ return constant_fls(x);
+
+ asm("clz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
+ ret = 32 - ret;
+ return ret;
}
+#define __fls(x) (fls(x) - 1)
#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
#define __ffs(x) (ffs(x) - 1)
#define ffz(x) __ffs( ~(x) )
#include <asm/types.h>
#ifdef __KERNEL__
-#define STACK_TOP ((current->personality == PER_LINUX_32BIT) ? \
+#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
TASK_SIZE : TASK_SIZE_26)
#define STACK_TOP_MAX TASK_SIZE
#endif
EXPORT_SYMBOL(__strncpy_from_user);
#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
EXPORT_SYMBOL(__copy_from_user);
EXPORT_SYMBOL(__copy_to_user);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
-EXPORT_SYMBOL(copy_page);
-
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(mcount);
#endif
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/delay.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/uaccess.h>
* Common low-level hardware init for omap1. This should only get called from
* board specific init.
*/
-void __init omap1_init_common_hw()
+void __init omap1_init_common_hw(void)
{
/* REVISIT: Refer to OMAP5910 Errata, Advisory SYS_1: "Timeout Abort
* on a Posted Write in the TIPB Bridge".
--- /dev/null
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+struct palm27x_asoc_info {
+ int jack_gpio;
+};
+
+#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
+void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
+#else
+static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
+#endif
+
+#endif
#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
+#define LCD_TYPE_MASK 0xf
#define LCD_TYPE_UNKNOWN 0
#define LCD_TYPE_MONO_STN 1
#define LCD_TYPE_MONO_DSTN 2
/**
* init_gpio_reset() - register GPIO as reset generator
- *
- * @gpio - gpio nr
- * @output - set gpio as out/low instead of input during normal work
+ * @gpio: gpio nr
+ * @output: set gpio as out/low instead of input during normal work
*/
extern int init_gpio_reset(int gpio, int output);
u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR);
/* Devices prepare suspend */
- is_bt_on = gpio_get_value(GPIO83_BT_ON);
+ is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
1:
mov r0, #0xa0000000 @ Don't suppose memory access works
orr r0, r0, #0x00200000 @ even if it's supposed to
+ orr r0, r0, #0x0000b000
mov r1, #0
str r1, [r0] @ Early disable resume for next boot
ldr r0, mioa701_jumpaddr @ (Murphy's Law)
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
+ GPIO14_GPIO, /* SD detect */
+ GPIO114_GPIO, /* SD power */
+ GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO31_AC97_SYNC,
/* IrDA */
+ GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
GPIO16_PWM0_OUT,
/* USB */
- GPIO13_GPIO,
+ GPIO13_GPIO, /* usb detect */
+ GPIO95_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO94_GPIO, /* wifi power 1 */
+ GPIO108_GPIO, /* wifi power 2 */
+ GPIO116_GPIO, /* wifi ready */
+
+ /* MATRIX KEYPAD */
+ GPIO100_KP_MKIN_0,
+ GPIO101_KP_MKIN_1,
+ GPIO102_KP_MKIN_2,
+ GPIO97_KP_MKIN_3,
+ GPIO103_KP_MKOUT_0,
+ GPIO104_KP_MKOUT_1,
+ GPIO105_KP_MKOUT_2,
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MISC. */
+ GPIO10_GPIO, /* hotsync button */
+ GPIO12_GPIO, /* power detect */
+ GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
int err = 0;
/* Setup an interrupt for detecting card insert/remove events */
- err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
- IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+ err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
+ if (err)
+ goto err;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
+ if (err)
+ goto err2;
+ err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
+ palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"SD/MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
__func__);
- return err;
+ goto err2;
}
err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
if (err)
- goto pwr_err;
+ goto err3;
+ err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
+ if (err)
+ goto err4;
err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
if (err)
- goto ro_err;
+ goto err4;
+ err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
+ if (err)
+ goto err5;
printk(KERN_DEBUG "%s: irq registered\n", __func__);
return 0;
-ro_err:
+err5:
+ gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+err4:
gpio_free(GPIO_NR_PALMTX_SD_POWER);
-pwr_err:
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+err3:
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+err2:
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
+err:
return err;
}
{
gpio_free(GPIO_NR_PALMTX_SD_READONLY);
gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+ free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
+ gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
}
static void palmtx_mci_power(struct device *dev, unsigned int vdd)
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
-
};
static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
if (ret)
goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
+ if (ret)
+ goto err2;
ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
+ if (ret)
+ goto err3;
return 0;
+err3:
+ gpio_free(GPIO_NR_PALMTX_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMTX_BL_POWER);
err:
/******************************************************************************
* IrDA
******************************************************************************/
+static int palmtx_irda_startup(struct device *dev)
+{
+ int err;
+ err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
+ if (err)
+ goto err;
+ err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
+ if (err)
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+err:
+ return err;
+}
+
+static void palmtx_irda_shutdown(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
+}
+
static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
{
gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
}
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+ .startup = palmtx_irda_startup,
+ .shutdown = palmtx_irda_shutdown,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = palmtx_irda_transceiver_mode,
};
/******************************************************************************
* UDC
******************************************************************************/
-static void palmtx_udc_command(int cmd)
-{
- gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
- udelay(50);
- gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
-}
-
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .udc_command = palmtx_udc_command,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup_inverted = 0,
};
/******************************************************************************
ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
- goto err_cs_ac;
-
- ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+ goto err1;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
if (ret)
- goto err_cs_usb;
+ goto err2;
return 0;
-err_cs_usb:
+err2:
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
-err_cs_ac:
+err1:
return ret;
}
return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
}
-static int palmtx_is_usb_online(void)
-{
- return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
-}
-
static void power_supply_exit(struct device *dev)
{
- gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
}
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmtx_is_ac_online,
- .is_usb_online = palmtx_is_usb_online,
.exit = power_supply_exit,
.supplied_to = palmtx_supplicants,
.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
}
+/* setup udc GPIOs initial state */
+static void __init palmtx_udc_init(void)
+{
+ if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ }
+}
+
+
static void __init palmtx_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
+ palmtx_udc_init();
pxa_set_udc_info(&palmtx_udc_info);
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
.gpio = NR_BUILTIN_GPIO + 1,
}, {
.bus_id = 0, /* Must match with the camera ID above */
+ .gpio = -ENXIO,
}
};
/* Jump into ROM at address 0 */
cpu_reset(0);
break;
- case 'h':
- do_hw_reset();
- break;
case 'g':
do_gpio_reset();
break;
+ case 'h':
+ default:
+ do_hw_reset();
+ break;
}
}
static unsigned long spitz_pin_config[] __initdata = {
/* Chip Selects */
GPIO78_nCS_2, /* SCOOP #2 */
+ GPIO79_nCS_3, /* NAND */
GPIO80_nCS_4, /* SCOOP #1 */
/* LCD - 16bpp Active TFT */
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
- GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
+ GPIO104_PSKTSEL,
/* MMC */
GPIO32_MMC_CLK,
spitz_pcmcia_config.num_devs = 1;
platform_scoop_config = &spitz_pcmcia_config;
- pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
common_init();
unsigned long pin_mosi;
unsigned long pin_miso;
+ int num_chipselect;
int bus_num;
void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
static unsigned long ai_multi;
static int ai_usermode;
+#define UM_WARN (1 << 0)
+#define UM_FIXUP (1 << 1)
+#define UM_SIGNAL (1 << 2)
+
#ifdef CONFIG_PROC_FS
static const char *usermode_action[] = {
"ignored",
user:
ai_user += 1;
- if (ai_usermode & 1)
+ if (ai_usermode & UM_WARN)
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*lx "
"Address=0x%08lx FSR 0x%03x\n", current->comm,
task_pid_nr(current), instrptr,
thumb_mode(regs) ? tinstr : instr,
addr, fsr);
- if (ai_usermode & 2)
+ if (ai_usermode & UM_FIXUP)
goto fixup;
- if (ai_usermode & 4)
+ if (ai_usermode & UM_SIGNAL)
force_sig(SIGBUS, current);
else
set_cr(cr_no_alignment);
res->write_proc = proc_alignment_write;
#endif
+ /*
+ * ARMv6 and later CPUs can perform unaligned accesses for
+ * most single load and store instructions up to word size.
+ * LDM, STM, LDRD and STRD still need to be handled.
+ *
+ * Ignoring the alignment fault is not an option on these
+ * CPUs since we spin re-faulting the instruction without
+ * making any progress.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) {
+ cr_alignment &= ~CR_A;
+ cr_no_alignment &= ~CR_A;
+ set_cr(cr_alignment);
+ ai_usermode = UM_FIXUP;
+ }
+
hook_fault_code(1, do_alignment, SIGILL, "alignment exception");
hook_fault_code(3, do_alignment, SIGILL, "alignment exception");
#include <linux/module.h>
#include <linux/signal.h>
#include <linux/mm.h>
+#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
+#define OMAP24XX_GPIO_WAKE_EN 0x0020
#define OMAP24XX_GPIO_CTRL 0x0030
#define OMAP24XX_GPIO_OE 0x0034
#define OMAP24XX_GPIO_DATAIN 0x0038
#endif
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+ wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
break;
{
int i;
- if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+ if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
return 0;
for (i = 0; i < gpio_bank_count; i++) {
u32 pseudo_palette[17];
struct lcd_panel *panel; /* LCD panel */
- struct lcd_ctrl *ctrl; /* LCD controller */
- struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+ const struct lcd_ctrl *ctrl; /* LCD controller */
+ const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
interface */
struct device *dev;
* clk_allow_idle - Counters previous clk_deny_idle
* @clk: clock signal handle
*/
-void clk_deny_idle(struct clk *clk);
+void clk_allow_idle(struct clk *clk);
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
if (!_omap_sram_reprogram_clock)
omap_sram_error();
- return _omap_sram_reprogram_clock(dpllctl, ckctl);
+ _omap_sram_reprogram_clock(dpllctl, ckctl);
}
int __init omap1_sram_init(void)
if (!_omap2_sram_ddr_init)
omap_sram_error();
- return _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
- base_cs, force_unlock);
+ _omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+ base_cs, force_unlock);
}
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
if (!_omap2_sram_reprogram_sdrc)
omap_sram_error();
- return _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+ _omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
#define PCIE_CONF_REG(r) ((((r) & 0xf00) << 16) | ((r) & 0xfc))
#define PCIE_CONF_BUS(b) (((b) & 0xff) << 16)
#define PCIE_CONF_DEV(d) (((d) & 0x1f) << 11)
-#define PCIE_CONF_FUNC(f) (((f) & 0x3) << 8)
+#define PCIE_CONF_FUNC(f) (((f) & 0x7) << 8)
#define PCIE_CONF_DATA_OFF 0x18fc
#define PCIE_MASK_OFF 0x1910
#define PCIE_CTRL_OFF 0x1a00
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
static struct smc_timing flash_timing __initdata = {
.ncs_read_setup = 0,
#include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/init.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/init.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
/* Oscillator frequencies. These are board-specific */
unsigned long at32_board_osc_rates[3] = {
extra-y := vmlinux.bin vmlinux.gz
-OBJCOPYFLAGS_vmlinux.bin := -O binary
+OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note.gnu.build-id
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 15:40:26 2008
+# Linux kernel version: 2.6.28-rc8
+# Thu Dec 18 11:22:23 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type and features
CONFIG_CPU_AT32AP7000=y
CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATNGW100 is not set
+# CONFIG_BOARD_FAVR_32 is not set
+# CONFIG_BOARD_MIMC200 is not set
# CONFIG_BOARD_ATSTK1002 is not set
# CONFIG_BOARD_ATSTK1003 is not set
# CONFIG_BOARD_ATSTK1004 is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_CMDLINE=""
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# Self-contained MTD device drivers
#
CONFIG_MTD_DATAFLASH=m
+# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
+CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
CONFIG_ATMEL_TCB_CLKSRC=y
CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=m
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
+#
+# Memory mapped GPIO expanders:
+#
+
#
# I2C GPIO expanders:
#
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_AT32AP700X_WDT=y
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_ATMEL=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_MMC_TEST is not set
#
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
+# CONFIG_MMC_ATMELMCI_DMA is not set
CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+# CONFIG_EXT4_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
{
u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart1_pins(void)
{
u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */
- select_peripheral(PIOA, pin_mask, PERIPH_A, 0);
+ select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP);
}
static inline void configure_usart2_pins(void)
{
u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static inline void configure_usart3_pins(void)
{
u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */
- select_peripheral(PIOB, pin_mask, PERIPH_B, 0);
+ select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP);
}
static struct platform_device *__initdata at32_usarts[4];
int error = -EBADF;
struct file * file = NULL;
- flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
- if (!(flags & MAP_ANONYMOUS)) {
- file = fget(fd);
- if (!file)
- goto out;
- }
-
/* As with sparc32, make sure the shift for mmap2 is constant
(12), no matter what PAGE_SIZE we have.... */
/* But unlike sparc32, don't just silently break if we're
trying to map something we can't */
- if (pgoff & ((1<<(PAGE_SHIFT-12))-1))
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
return -EINVAL;
+ pgoff >>= PAGE_SHIFT - 12;
- pgoff >>= (PAGE_SHIFT - 12);
+ flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
+ if (!(flags & MAP_ANONYMOUS)) {
+ file = fget(fd);
+ if (!file)
+ goto out;
+ }
down_write(¤t->mm->mmap_sem);
error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Mon Aug 4 15:38:01 2008
+# Linux kernel version: 2.6.28-rc7
+# Mon Dec 8 08:12:07 2008
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
+# CONFIG_PARAVIRT_GUEST is not set
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
+# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_XEN_GUEST is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-# CONFIG_DMAR is not set
-
#
-# Power management and ACPI
+# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
-# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
+CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
+CONFIG_DMAR=y
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
+# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
# CONFIG_HP_ILO is not set
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
CONFIG_IGB=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_TR is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=m
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# HP Simulator drivers
+#
+# CONFIG_HP_SIMETH is not set
+# CONFIG_HP_SIMSERIAL is not set
+# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m
#
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_HAVE_KVM=y
-CONFIG_VIRTUALIZATION=y
-# CONFIG_KVM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# HP Simulator drivers
-#
-# CONFIG_HP_SIMETH is not set
-# CONFIG_HP_SIMSERIAL is not set
-# CONFIG_HP_SIMSCSI is not set
#
# Kernel hacking
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_HAVE_KVM=y
+CONFIG_VIRTUALIZATION=y
+# CONFIG_KVM is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTIO_BALLOON is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_IRQ_PER_CPU=y
config HP_SIMETH
bool "Simulated Ethernet "
+ depends on NET
config HP_SIMSERIAL
bool "Simulated serial driver support"
#define paravirt_getreg(reg) \
({ \
unsigned long res; \
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
if ((reg) == _IA64_REG_IP) \
res = ia64_native_getreg(_IA64_REG_IP); \
else \
#define arch_has_block_step() (1)
extern void user_enable_block_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
}
EXPORT_SYMBOL(arch_register_cpu);
-void arch_unregister_cpu(int num)
+void __ref arch_unregister_cpu(int num)
{
unregister_cpu(&sysfs_cpus[num].cpu);
+#ifdef CONFIG_ACPI
unmap_cpu_from_node(num, cpu_to_node(num));
+#endif
}
EXPORT_SYMBOL(arch_unregister_cpu);
#else
kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
obj-$(CONFIG_KVM) += kvm.o
-EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
+CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
vtlb.o process.o
#Add link memcpy and memset to avoid possible structure assignment error
GLOBAL_ENTRY(kvm_vps_resume_handler)
movl r30 = PAL_VPS_RESUME_HANDLER
;;
- ld8 r27=[r25]
+ ld8 r26=[r25]
shr r17=r17,IA64_ISR_IR_BIT
;;
- dep r27=r17,r27,63,1 // bit 63 of r27 indicate whether enable CFLE
+ dep r26=r17,r26,63,1 // bit 63 of r26 indicate whether enable CFLE
mov pr=r23,-2
br.sptk.many kvm_vps_entry
END(kvm_vps_resume_handler)
;;
ld8 r19=[r19]
mov b0=r29
- cmp.ne p6,p7 = r0,r0
+ mov r27=cr.isr
;;
- tbit.z p6,p7 = r19,IA64_PSR_IC_BIT // p1=vpsr.ic
+ tbit.z p6,p7 = r19,IA64_PSR_IC_BIT // p7=vpsr.ic
+ shr r27=r27,IA64_ISR_IR_BIT
;;
(p6) ld8 r26=[r25]
(p7) mov b0=r28
+ ;;
+ (p6) dep r26=r27,r26,63,1
mov pr=r31,-2
br.sptk.many b0 // call pal service
;;
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
*/
-static void
+static void __init
sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
{
s64 status = 0;
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2000-2008 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/irq.h>
int cpu = nasid_slice_to_cpuid(nasid, slice);
#ifdef CONFIG_SMP
int cpuphys;
+ irq_desc_t *desc;
#endif
pci_dev_get(pci_dev);
#ifdef CONFIG_SMP
cpuphys = cpu_physical_id(cpu);
set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0);
+ desc = irq_to_desc(sn_irq_info->irq_irq);
+ /*
+ * Affinity was set by the PROM, prevent it from
+ * being reset by the request_irq() path.
+ */
+ desc->status |= IRQ_AFFINITY_SET;
#endif
}
* Set flag for enabling shub specific wars
*/
-static inline int __init is_shub_1_1(int nasid)
+static inline int __cpuinit is_shub_1_1(int nasid)
{
unsigned long id;
int rev;
return rev <= 2;
}
-static void __init sn_check_for_wars(void)
+static void __cpuinit sn_check_for_wars(void)
{
int cnode;
for_each_online_node(cnode) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
- for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
+ for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++)
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
- memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
- }
/*
* Now copy the array of nodepda pointers to each nodepda.
/*
* References to members of the boot_cpu_data structure.
*/
- .text
+.section .text.head, "ax"
.global start_kernel
.global __bss_start
.global _end
/*
* AP startup routine
*/
- .text
.global eit_vector
ENTRY(startup_AP)
;; setup EVB
nop
#endif /* CONFIG_SMP */
+ .text
ENTRY(stack_start)
.long init_thread_union+8192
.long __KERNEL_DS
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:00 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:42 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
CONFIG_AMIGA=y
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:01 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:43 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
# CONFIG_FB_CFB_COPYAREA is not set
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:02 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:44 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
CONFIG_ATARI=y
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_STRAM_PROC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_VETH=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
CONFIG_ATARILANCE=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_ATARI=m
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=y
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-CONFIG_JBD2=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:03 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:45 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:04 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:46 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:06 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:47 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
CONFIG_MAC=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
# CONFIG_HEARTBEAT is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:07 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:48 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
CONFIG_AMIGA=y
CONFIG_ATARI=y
CONFIG_MAC=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+CONFIG_MII=y
CONFIG_ARIADNE=m
CONFIG_A2065=m
CONFIG_HYDRA=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND_Q40=m
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4DEV_FS=y
-# CONFIG_EXT4DEV_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-CONFIG_JBD2=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:08 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:50 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:09 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:51 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:10 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:52 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
-CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:11 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:53 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
CONFIG_NO_DMA=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
+# CONFIG_AMIGA is not set
+# CONFIG_ATARI is not set
+# CONFIG_MAC is not set
+# CONFIG_APOLLO is not set
+# CONFIG_VME is not set
+# CONFIG_HP300 is not set
+# CONFIG_SUN3X is not set
+# CONFIG_Q40 is not set
CONFIG_SUN3=y
#
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-#
-# Sonics Silicon Backplane
-#
-
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Wed Sep 10 09:02:12 2008
+# Linux kernel version: 2.6.28-rc7
+# Tue Dec 2 20:27:54 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_GENERIC_IOMAP=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_HZ=100
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform dependent setup
#
-# CONFIG_SUN3 is not set
# CONFIG_AMIGA is not set
# CONFIG_ATARI is not set
# CONFIG_MAC is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# General setup
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_EXT_SYSFS is not set
-# CONFIG_MAC80211 is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
+# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
help
If you say Y here, some debugging macros will do run-time checking.
If you say N here, those macros will mostly turn to no-ops. See
- include/asm-mips/debug.h for debuging macros.
+ arch/mips/include/asm/debug.h for debugging macros.
If unsure, say N.
endmenu
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Mon Jun 11 00:23:51 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 17:53:48 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_LEMOTE_FULONG=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+CONFIG_LEMOTE_FULONG=y
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
#
# CPU selection
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_WB=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="lm32"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_ISA=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
CONFIG_NET=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_PHONET=m
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
# CONFIG_IEEE80211_CRYPT_CCMP is not set
# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+# CONFIG_NET_9P_DEBUG is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x1fc00000
CONFIG_MTD_PHYSMAP_LEN=0x80000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-# CONFIG_PHANTOM is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_TC35815 is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+CONFIG_MEDIA_TUNER_CUSTOMIZE=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+CONFIG_USB_M5602=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_USB_W9968CF is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_DVB_CORE is not set
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_RTCTIMER=m
-CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA MIPS devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_MIPS=y
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# CONFIG_USB_MOUSE is not set
#
-# USB support
-#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_BRIGHT=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DELL=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_LOGITECH=m
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+CONFIG_USB_WUSB_CBAF=m
+# CONFIG_USB_WUSB_CBAF_DEBUG is not set
#
# USB Host Controller Drivers
#
+CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=m
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
CONFIG_USB_LIBUSUAL=y
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+CONFIG_USB_SEVSEG=m
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_VST=m
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# I2C RTC drivers
#
-# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
-# DMA Engine support
+# SPI RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
#
-# DMA Clients
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=m
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Devices
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FS_XIP=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
#
-# Hardware crypto devices
+# Random Number Generation
#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:39:49 2007
+# Linux kernel version: 2.6.28-rc6
+# Fri Nov 28 15:41:33 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
CONFIG_SGI_IP22=y
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_I8259=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
+CONFIG_SGI_HAS_INDYDOG=y
+CONFIG_SGI_HAS_HAL2=y
+CONFIG_SGI_HAS_SEEQ=y
+CONFIG_SGI_HAS_WD93=y
+CONFIG_SGI_HAS_ZILOG=y
+CONFIG_SGI_HAS_I8042=y
+CONFIG_DEFAULT_SGI_PARTITION=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_L1_CACHE_SHIFT=7
CONFIG_ARC_CONSOLE=y
CONFIG_ARC_PROMLIB=y
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_EISA is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
+# CONFIG_WIRELESS is not set
CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
# CONFIG_NET_9P is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_SGIWD93_SCSI=y
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
CONFIG_PHYLIB=m
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
CONFIG_SGISEEQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_STRIP=m
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
+# CONFIG_IWLWIFI_LEDS is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=m
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
#
-# SPI support
+# Sonics Silicon Backplane
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+CONFIG_HID_PID=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1286=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4DEV_COMPAT=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+CONFIG_DYNAMIC_PRINTK_DEBUG=y
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
# CONFIG_CRYPTO_HW is not set
#
CONFIG_BITREVERSE=m
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:33 2007
+# Linux kernel version: 2.6.28-rc7
+# Wed Dec 10 14:39:08 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
CONFIG_SGI_IP32=y
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARC=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_ARC32=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
+# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_TX49XX is not set
CONFIG_CPU_R5000=y
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
+# CONFIG_HZ_1000 is not set
# CONFIG_HZ_1024 is not set
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_MIPS32_O32=y
-# CONFIG_MIPS32_N32 is not set
+CONFIG_MIPS32_N32=y
CONFIG_BINFMT_ELF32=y
#
# Power management options
#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_IEEE80211=y
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=y
-CONFIG_IEEE80211_CRYPT_CCMP=y
-CONFIG_IEEE80211_SOFTMAC=y
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=y
-
-#
-# Misc devices
-#
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
-CONFIG_SCSI_NETLINK=y
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_CHR_DEV_OSST=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=y
-# CONFIG_AIC94XX_DEBUG is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
CONFIG_SGI_O2MACE_ETH=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=y
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=y
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=y
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_MACEPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
+CONFIG_SERIO_MACEPS2=y
+CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set
# Character devices
#
CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
+CONFIG_HW_RANDOM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# I2C support
+# Watchdog Device Drivers
#
-# CONFIG_I2C is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
#
-# SPI support
+# PCI-based Watchdog Cards
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
-# CONFIG_VIDEO_DEV is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia core support
#
-# CONFIG_DVB is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+CONFIG_DAB=y
#
-# Console display driver support
+# Graphics support
#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_UVESA is not set
+CONFIG_FB_GBE=y
+CONFIG_FB_GBE_MEM=4
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# HID Devices
+# Console display driver support
#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SGI_CLUT224=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
+# Special HID drivers
#
+CONFIG_HID_COMPAT=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+# RTC interfaces
#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# Real Time Clock
+# SPI RTC drivers
#
-# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
+# Platform RTC drivers
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
#
CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QFMT_V1=m
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=y
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
#
-# Cryptographic options
+# Crypto core or helper
#
-CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_WP512=y
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_ANUBIS=y
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CAMELLIA=y
+# CONFIG_CRYPTO_LZO is not set
#
-# Hardware crypto devices
+# Random Number Generation
#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:59:29 2007
+# Linux kernel version: 2.6.28-rc6
+# Mon Dec 1 08:08:19 2008
#
CONFIG_MIPS=y
CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
CONFIG_MIPS_MALTA=y
# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
+# CONFIG_MACH_EMMA is not set
# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
# CONFIG_WR_PPMC is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_BOOT_RAW=y
CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_HOTPLUG_CPU is not set
CONFIG_I8259=y
CONFIG_MIPS_BONITO64=y
CONFIG_MIPS_MSC=y
# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_ISA_DMA=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
+CONFIG_IRQ_GIC=y
+CONFIG_MIPS_BOARDS_GEN=y
CONFIG_PCI_GT64XXX_PCI0=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R8000 is not set
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_HARDWARE_WATCHPOINTS=y
#
# Kernel type
CONFIG_MIPS_MT_SMP=y
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_MIPS_MT=y
+# CONFIG_SCHED_SMT is not set
+CONFIG_SYS_SUPPORTS_SCHED_SMT=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_MIPS_MT_FPAFF=y
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_CPU_HAS_SMARTMIPS is not set
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_SRS=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_SMARTMIPS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_SMP=y
+CONFIG_SMP_UP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_2=y
CONFIG_NR_CPUS=2
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
CONFIG_HZ_100=y
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_KEXEC is not set
CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_CPUSETS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+CONFIG_PID_NS=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
#
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_MMU=y
CONFIG_I8253=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_TRAD_SIGNALS=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
+CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_GARP=m
CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
#
# Queueing/Scheduling
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
+CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_PHONET=m
CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
+CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
-# CONFIG_FIXED_PHY is not set
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_AX88796=m
+# CONFIG_AX88796_93CX6 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_TC35815=m
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
+# CONFIG_RTL8180 is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_IWLAGN is not set
+# CONFIG_IWL3945 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
-CONFIG_BCM43XX=m
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA=y
-CONFIG_BCM43XX_PIO=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_RT2X00 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
-CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_UBIFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
CONFIG_CMDLINE=""
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
mtc0 \reg, CP0_TCSTATUS
_ehb
.endm
+#elif defined(CONFIG_CPU_MIPSR2)
+ .macro local_irq_enable reg=t0
+ ei
+ irq_enable_hazard
+ .endm
+
+ .macro local_irq_disable reg=t0
+ di
+ irq_disable_hazard
+ .endm
#else
.macro local_irq_enable reg=t0
mfc0 \reg, CP0_STATUS
#include <asm/break.h>
-#define BUG() \
-do { \
- __asm__ __volatile__("break %0" : : "i" (BRK_BUG)); \
-} while (0)
+static inline void __noreturn BUG(void)
+{
+ __asm__ __volatile__("break %0" : : "i" (BRK_BUG));
+ /* Fool GCC into thinking the function doesn't return. */
+ while (1)
+ ;
+}
#define HAVE_ARCH_BUG
#if (_MIPS_ISA > _MIPS_ISA_MIPS1)
-#define BUG_ON(condition) \
-do { \
- __asm__ __volatile__("tne $0, %0, %1" \
- : : "r" (condition), "i" (BRK_BUG)); \
-} while (0)
+static inline void __BUG_ON(unsigned long condition)
+{
+ if (__builtin_constant_p(condition)) {
+ if (condition)
+ BUG();
+ else
+ return;
+ }
+ __asm__ __volatile__("tne $0, %0, %1"
+ : : "r" (condition), "i" (BRK_BUG));
+}
+
+#define BUG_ON(C) __BUG_ON((unsigned long)(C))
#define HAVE_ARCH_BUG_ON
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
- " dsbh %0, %1 \n"
- " dshd %0, %0 \n"
- " drotr %0, %0, 32 \n"
+ " dsbh %0, %1\n"
+ " dshd %0, %0"
: "=r" (x)
: "r" (x));
*/
#ifdef __MIPSEB__
#define ELF_DATA ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_MIPS
/* We don't do dynamic PCI IRQ allocation */
}
+#define HAVE_PCI_MMAP
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine);
+
/*
* Dynamic DMA mapping stuff.
* MIPS has everything mapped statically.
#ifndef _ASM_PTRACE_H
#define _ASM_PTRACE_H
-#ifdef CONFIG_64BIT
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-#endif
-
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
LEAF(sys_syscall)
subu t0, a0, __NR_O32_Linux # check syscall number
sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
sll t1, t0, 3
beqz v0, einval
-
lw t2, sys_call_table(t1) # syscall routine
- li v1, 4000 - __NR_O32_Linux # index of sys_syscall
- beq t0, v1, einval # do not recurse
-
/* Some syscalls like execve get their arguments from struct pt_regs
and claim zero arguments in the syscall table. Thus we have to
assume the worst case and shuffle around all potential arguments.
sys sys_pselect6 6
sys sys_ppoll 5
sys sys_unshare 1
- sys sys_splice 4
+ sys sys_splice 6
sys sys_sync_file_range 7 /* 4305 */
sys sys_tee 4
sys sys_vmsplice 4
PTR sys_splice
PTR sys_sync_file_range
PTR sys_tee
- PTR sys_vmsplice /* 6270 */
+ PTR compat_sys_vmsplice /* 6270 */
PTR sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list
END(handle_sys)
LEAF(sys32_syscall)
- sltu v0, a0, __NR_O32_Linux + __NR_O32_Linux_syscalls + 1
+ subu t0, a0, __NR_O32_Linux # check syscall number
+ sltiu v0, t0, __NR_O32_Linux_syscalls + 1
+ beqz t0, einval # do not recurse
+ dsll t1, t0, 3
beqz v0, einval
-
- dsll v0, a0, 3
- ld t2, (sys_call_table - (__NR_O32_Linux * 8))(v0)
-
- li v1, 4000 # indirect syscall number
- beq a0, v1, einval # do not recurse
+ ld t2, sys_call_table(t1) # syscall routine
move a0, a1 # shift argument registers
move a1, a2
jr t2
/* Unreached */
-einval: li v0, -EINVAL
+einval: li v0, -ENOSYS
jr ra
END(sys32_syscall)
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
PTR sys_tee
- PTR sys_vmsplice
+ PTR compat_sys_vmsplice
PTR compat_sys_move_pages
PTR compat_sys_set_robust_list
PTR compat_sys_get_robust_list /* 4310 */
/* It's good to be able to run the SP and if it chokes have a look at
the /dev/rt?. But if we reset the pointer to the shared struct we
- loose what has happened. So perhaps if garbage is sent to the vpe
+ lose what has happened. So perhaps if garbage is sent to the vpe
device, use it as a trigger for the reset. Hopefully a nice
executable will be along shortly. */
if (ret < 0)
void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
+ plat_unmap_dma_mem(dma_handle);
free_pages((unsigned long) vaddr, get_order(size));
}
{
unsigned long addr = (unsigned long) vaddr;
+ plat_unmap_dma_mem(dma_handle);
+
if (!plat_device_is_coherent(dev))
addr = CAC_ADDR(addr);
#
obj-y := malta-amon.o malta-cmdline.o \
malta-display.o malta-init.o malta-int.o \
- malta-memory.o malta-mtd.o \
- malta-platform.o malta-reset.o \
- malta-setup.o malta-time.o
+ malta-memory.o malta-platform.o \
+ malta-reset.o malta-setup.o malta-time.o
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 MIPS Technologies, Inc.
- * written by Ralf Baechle <ralf@linux-mips.org>
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <mtd/mtd-abi.h>
-
-static struct mtd_partition malta_mtd_partitions[] = {
- {
- .name = "YAMON",
- .offset = 0x0,
- .size = 0x100000,
- .mask_flags = MTD_WRITEABLE
- }, {
- .name = "User FS",
- .offset = 0x100000,
- .size = 0x2e0000
- }, {
- .name = "Board Config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE
- }
-};
-
-static struct physmap_flash_data malta_flash_data = {
- .width = 4,
- .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
- .parts = malta_mtd_partitions
-};
-
-static struct resource malta_flash_resource = {
- .start = 0x1e000000,
- .end = 0x1e3fffff,
- .flags = IORESOURCE_MEM
-};
-
-static struct platform_device malta_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &malta_flash_data,
- },
- .num_resources = 1,
- .resource = &malta_flash_resource,
-};
-
-static int __init malta_mtd_init(void)
-{
- platform_device_register(&malta_flash);
-
- return 0;
-}
-
-module_init(malta_mtd_init)
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 2007 MIPS Technologies, Inc.
+ * Copyright (C) 2006, 07 MIPS Technologies, Inc.
* written by Ralf Baechle (ralf@linux-mips.org)
+ * written by Ralf Baechle <ralf@linux-mips.org>
*
- * Probe driver for the Malta's UART ports:
+ * Copyright (C) 2008 Wind River Systems, Inc.
+ * updated by Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * 1. Probe driver for the Malta's UART ports:
*
* o 2 ports in the SMC SuperIO
* o 1 port in the CBUS UART, a discrete 16550 which normally is only used
*
* We don't use 8250_platform.c on Malta as it would result in the CBUS
* UART becoming ttyS0.
+ *
+ * 2. Register RTC-CMOS platform device on Malta.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
+#include <linux/mc146818rtc.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <mtd/mtd-abi.h>
#define SMC_PORT(base, int) \
{ \
{ },
};
-static struct platform_device uart8250_device = {
+static struct platform_device malta_uart8250_device = {
.name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM2,
+ .id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = uart8250_data,
},
};
-static int __init uart8250_init(void)
+struct resource malta_rtc_resources[] = {
+ {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(7),
+ .flags = IORESOURCE_IO,
+ }, {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device malta_rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = malta_rtc_resources,
+ .num_resources = ARRAY_SIZE(malta_rtc_resources),
+};
+
+static struct mtd_partition malta_mtd_partitions[] = {
+ {
+ .name = "YAMON",
+ .offset = 0x0,
+ .size = 0x100000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "User FS",
+ .offset = 0x100000,
+ .size = 0x2e0000
+ }, {
+ .name = "Board Config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE
+ }
+};
+
+static struct physmap_flash_data malta_flash_data = {
+ .width = 4,
+ .nr_parts = ARRAY_SIZE(malta_mtd_partitions),
+ .parts = malta_mtd_partitions
+};
+
+static struct resource malta_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x1e3fffff,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device malta_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &malta_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &malta_flash_resource,
+};
+
+static struct platform_device *malta_devices[] __initdata = {
+ &malta_uart8250_device,
+ &malta_rtc_device,
+ &malta_flash_device,
+};
+
+static int __init malta_add_devices(void)
{
- return platform_device_register(&uart8250_device);
-}
+ int err;
-module_init(uart8250_init);
+ err = platform_add_devices(malta_devices, ARRAY_SIZE(malta_devices));
+ if (err)
+ return err;
+
+ /*
+ * Set RTC to BCD mode to support current alarm code.
+ */
+ CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL);
+
+ return 0;
+}
-MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("8250 UART probe driver for the Malta CBUS UART");
+device_initcall(malta_add_devices);
EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
#endif
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state, int write_combine)
+{
+ unsigned long prot;
+
+ /*
+ * I/O space can be accessed via normal processor loads and stores on
+ * this platform but for now we elect not to do this and portable
+ * drivers should not do this anyway.
+ */
+ if (mmap_state == pci_mmap_io)
+ return -EINVAL;
+
+ /*
+ * Ignore write-combine; for now only return uncached mappings.
+ */
+ prot = pgprot_val(vma->vm_page_prot);
+ prot = (prot & ~_CACHE_MASK) | _CACHE_UNCACHED;
+ vma->vm_page_prot = __pgprot(prot);
+
+ return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
char * (*pcibios_plat_setup)(char *str) __devinitdata;
char *__devinit pcibios_setup(char *str)
#ifdef CONFIG_PREEMPT
ENTRY(resume_kernel)
+ __cli
mov (TI_preempt_count,a2),d0 # non-zero preempt_count ?
cmp 0,d0
bne restore_all
mov (REG_EPSW,fp),d0
and EPSW_IM,d0
cmp EPSW_IM_7,d0 # interrupts off (exception path) ?
- beq restore_all
+ bne restore_all
call preempt_schedule_irq[],0
jmp need_resched
#endif
try_again:
/* pull chars out of the buffer */
ix = gdbstub_rx_outp;
+ barrier();
if (ix == gdbstub_rx_inp) {
if (nonblock)
return -EAGAIN;
ch = gdbstub_rx_buffer[ix++];
st = gdbstub_rx_buffer[ix++];
+ barrier();
gdbstub_rx_outp = ix & 0x00000fff;
if (st & UART_LSR_BI) {
} else {
switch (cur) {
/* Bxx (d8,PC) */
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
+ case 0xc0 ... 0xca:
if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
goto fault;
if (!__gdbstub_mark_bp(pc + 2, 0))
break;
/* LXX (d8,PC) */
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
+ case 0xd0 ... 0xda:
if (!__gdbstub_mark_bp(pc + 1, 0))
goto fault;
if (regs->pc != regs->lar &&
{
_enter("%s", port->name);
+ if (!port->uart.info || !port->uart.info->port.tty) {
+ mn10300_serial_dis_tx_intr(port);
+ return;
+ }
+
if (uart_tx_stopped(&port->uart) ||
uart_circ_empty(&port->uart.info->xmit))
mn10300_serial_dis_tx_intr(port);
/* MN10300 Kernel module helper routines
*
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Copyright (C) 2007, 2008 Red Hat, Inc. All Rights Reserved.
* Written by Mark Salter (msalter@redhat.com)
* - Derived from arch/i386/kernel/module.c
*
return 0;
}
-static uint32_t reloc_get16(uint8_t *p)
-{
- return p[0] | (p[1] << 8);
-}
-
-static uint32_t reloc_get24(uint8_t *p)
-{
- return reloc_get16(p) | (p[2] << 16);
-}
-
-static uint32_t reloc_get32(uint8_t *p)
-{
- return reloc_get16(p) | (reloc_get16(p+2) << 16);
-}
-
static void reloc_put16(uint8_t *p, uint32_t val)
{
p[0] = val & 0xff;
relocation = sym->st_value + rel[i].r_addend;
switch (ELF32_R_TYPE(rel[i].r_info)) {
- /* for the first four relocation types, we add the
- * adjustment into the value at the location given */
+ /* for the first four relocation types, we simply
+ * store the adjustment at the location given */
case R_MN10300_32:
- value = reloc_get32(location);
- value += relocation;
- reloc_put32(location, value);
+ reloc_put32(location, relocation);
break;
case R_MN10300_24:
- value = reloc_get24(location);
- value += relocation;
- reloc_put24(location, value);
+ reloc_put24(location, relocation);
break;
case R_MN10300_16:
- value = reloc_get16(location);
- value += relocation;
- reloc_put16(location, value);
+ reloc_put16(location, relocation);
break;
case R_MN10300_8:
- *location += relocation;
+ *location = relocation;
break;
/* for the next three relocation types, we write the
reserve the page it is occupying. */
if (CONFIG_INTERRUPT_VECTOR_BASE >= CONFIG_KERNEL_RAM_BASE_ADDRESS &&
CONFIG_INTERRUPT_VECTOR_BASE < memory_end)
- reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, 1,
+ reserve_bootmem(CONFIG_INTERRUPT_VECTOR_BASE, PAGE_SIZE,
BOOTMEM_DEFAULT);
reserve_bootmem(PAGE_ALIGN(PFN_PHYS(free_pfn)), bootmap_size,
#define __VMLINUX_LDS__
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
+#include <asm/page.h>
OUTPUT_FORMAT("elf32-am33lin", "elf32-am33lin", "elf32-am33lin")
OUTPUT_ARCH(mn10300)
CONSTRUCTORS
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__nosave_end = .;
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.idt) }
. = ALIGN(32);
.data.init_task : { *(.data.init_task) }
/* might get freed after init */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
}
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
.exit.data : { *(.exit.data) }
#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
- . = ALIGN(32);
- __per_cpu_start = .;
- .data.percpu : { *(.data.percpu) }
- __per_cpu_end = .;
- . = ALIGN(4096);
+ PERCPU(32)
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
_end = . ;
/* This is where the kernel creates the early boot page tables */
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
pg0 = .;
/* Sections to be discarded */
#define to_parisc_driver(d) container_of(d, struct parisc_driver, drv)
#define parisc_parent(d) to_parisc_device(d->dev.parent)
-static inline char *parisc_pathname(struct parisc_device *d)
+static inline const char *parisc_pathname(struct parisc_device *d)
{
- return d->dev.bus_id;
+ return dev_name(&d->dev);
}
static inline void
typedef unsigned long __kernel_size_t;
typedef long __kernel_ssize_t;
typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#else
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
#endif
+typedef long __kernel_time_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
#define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
struct task_struct;
#define arch_has_single_step() 1
void user_disable_single_step(struct task_struct *task);
{
BUG_ON(mm == &init_mm); /* Should never happen */
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
flush_tlb_all();
#else
+ /* FIXME: currently broken, causing space id and protection ids
+ * to go out of sync, resulting in faults on userspace accesses.
+ */
if (mm) {
if (mm->context != 0)
free_sid(mm->context);
EXPORT_SYMBOL(hppa_dma_ops);
static struct device root = {
- .bus_id = "parisc",
+ .init_name = "parisc",
};
static inline int check_dev(struct device *dev)
static void setup_bus_id(struct parisc_device *padev)
{
struct hardware_path path;
- char *output = padev->dev.bus_id;
+ char name[20];
+ char *output = name;
int i;
get_node_path(padev->dev.parent, &path);
output += sprintf(output, "%u:", (unsigned char) path.bc[i]);
}
sprintf(output, "%u", (unsigned char) padev->hw_path);
+ dev_set_name(&padev->dev, name);
}
struct parisc_device * create_tree_node(char id, struct device *parent)
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/console.h>
-#include <linux/kallsyms.h>
#include <linux/bug.h>
#include <asm/assembly.h>
DEFINE_SPINLOCK(pa_dbit_lock);
#endif
-void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs);
static int printbinary(char *buf, unsigned long x, int nbits)
void show_regs(struct pt_regs *regs)
{
- int i;
+ int i, user;
char *level;
unsigned long cr30, cr31;
- level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
+ user = user_mode(regs);
+ level = user ? KERN_DEBUG : KERN_CRIT;
print_gr(level, regs);
for (i = 0; i < 8; i += 4)
PRINTREGS(level, regs->sr, "sr", RFMT, i);
- if (user_mode(regs))
+ if (user)
print_fr(level, regs);
cr30 = mfctl(30);
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
level, current_thread_info()->cpu, cr30, cr31);
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
- printk(level);
- print_symbol(" IAOQ[0]: %s\n", regs->iaoq[0]);
- printk(level);
- print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
- printk(level);
- print_symbol(" RP(r2): %s\n", regs->gr[2]);
-
- parisc_show_stack(current, NULL, regs);
+
+ if (user) {
+ printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
+ printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
+ printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
+ } else {
+ printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
+ printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
+ printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
+
+ parisc_show_stack(current, NULL, regs);
+ }
}
break;
if (__kernel_text_address(info->ip)) {
- printk("%s [<" RFMT ">] ", (i&0x3)==1 ? KERN_CRIT : "", info->ip);
-#ifdef CONFIG_KALLSYMS
- print_symbol("%s\n", info->ip);
-#else
- if ((i & 0x03) == 0)
- printk("\n");
-#endif
+ printk(KERN_CRIT " [<" RFMT ">] %pS\n",
+ info->ip, (void *) info->ip);
i++;
}
}
- printk("\n");
+ printk(KERN_CRIT "\n");
}
-void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+static void parisc_show_stack(struct task_struct *task, unsigned long *sp,
struct pt_regs *regs)
{
struct unwind_frame_info info;
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
#size-cells = <1>;
aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
+ ethernet0 = &enet1;
+ ethernet1 = &enet0;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
interrupts = <18 0x8>;
interrupt-parent = <&ipic>;
};
+
+ mcu_pio: mcu@a {
+ #gpio-cells = <2>;
+ compatible = "fsl,mc9s08qg8-mpc8349emitx",
+ "fsl,mcu-mpc8349emitx";
+ reg = <0x0a>;
+ gpio-controller;
+ };
};
spi@7000 {
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
-
- mcu_pio: mcu@a {
- #gpio-cells = <2>;
- compatible = "fsl,mc9s08qg8-mpc8349emitx",
- "fsl,mcu-mpc8349emitx";
- reg = <0x0a>;
- gpio-controller;
- };
};
usb@22000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
+ cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:49:16 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_XILINX_VIRTEX=y
+# CONFIG_ACADIA is not set
+# CONFIG_EP405 is not set
+# CONFIG_HCU4 is not set
+# CONFIG_KILAUEA is not set
+# CONFIG_MAKALU is not set
+# CONFIG_WALNUT is not set
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+# CONFIG_PPC40x_SIMPLE is not set
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_XILINX_SYSACE=y
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc1
-# Tue Aug 5 09:20:16 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:31:16 2008
#
# CONFIG_PPC64 is not set
CONFIG_NOT_COHERENT_CACHE=y
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_GET_USER_PAGES_FAST is not set
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
# CONFIG_PPC4xx_PCI_EXPRESS is not set
#
# CONFIG_KATMAI is not set
# CONFIG_RAINIER is not set
# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
# CONFIG_YOSEMITE is not set
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+# CONFIG_PPC44x_SIMPLE is not set
+# CONFIG_PPC4xx_GPIO is not set
CONFIG_XILINX_VIRTEX=y
CONFIG_XILINX_VIRTEX_5_FXT=y
# CONFIG_IPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
+CONFIG_OF_GPIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+CONFIG_SERIO_XILINX_XPS_PS2=y
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
#
-# I2C system bus drivers (mostly embedded / system-on-chip)
+# Memory mapped GPIO expanders:
#
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
+CONFIG_GPIO_XILINX=y
#
-# External I2C/SMBus adapter drivers
+# I2C GPIO expanders:
#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
#
-# Graphics adapter I2C/DDC channel drivers
+# PCI GPIO expanders:
#
-# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_GPIO_BT8XX is not set
#
-# Other I2C/SMBus bus drivers
+# SPI GPIO expanders:
#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-CONFIG_I2C_DEBUG_CORE=y
-CONFIG_I2C_DEBUG_ALGO=y
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_XILINX=y
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=y
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
#
# Kernel hacking
#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:11:37 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:12:40 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:56 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:10:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:22 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:11:02 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_MPC5200_WDT is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:13:19 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:13:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
CONFIG_ISA_DMA_API=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=m
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_PPC_CLOCK=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 07:12:39 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:30 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
-# CONFIG_SATA_FSL is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
CONFIG_PATA_MPC52xx=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_RTC_DRV_PPC is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
#
# MII PHY device drivers
#
-CONFIG_MARVELL_PHY=y
+# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 18 14:19:54 2008
+# Linux kernel version: 2.6.28-rc4
+# Thu Nov 13 02:09:07 2008
#
# CONFIG_PPC64 is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# Platform support
#
CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC52xx=y
-CONFIG_PPC_MPC5200=y
-CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MPC5200_BUGFIX=y
+# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_HIBERNATION is not set
+CONFIG_SUSPEND_FREEZER=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
-CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Input device support
#
-# CONFIG_INPUT is not set
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
# CONFIG_MPC5200_WDT is not set
# CONFIG_WATCHDOG_RTAS is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# Graphics support
#
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_R128 is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
#
# Display device support
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+# CONFIG_HID_APPLE is not set
+CONFIG_HID_BELKIN=y
+CONFIG_HID_BRIGHT=y
+CONFIG_HID_CHERRY=y
+# CONFIG_HID_CHICONY is not set
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DELL=y
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
# LED Triggers
#
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
# CONFIG_REALTEK_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 08:56:44 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 09:54:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Tue Oct 28 09:28:58 2008
+# Linux kernel version: 2.6.28-rc4
+# Fri Nov 14 10:06:19 2008
#
# CONFIG_PPC64 is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_XILINX_SYSACE is not set
+CONFIG_XILINX_SYSACE=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=m
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+CONFIG_SERIO_XILINX_XPS_PS2=m
# CONFIG_GAMEPORT is not set
#
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_XILINX=y
+
#
# I2C GPIO expanders:
#
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=m
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=m
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_NOP_TRACER=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_BOOT_TRACER is not set
}
}
+extern void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu);
+
#endif /* __POWERPC_KVM_PPC_H__ */
extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
unsigned long pstart, unsigned long prot,
int psize, int ssize);
-extern void set_huge_psize(int psize);
extern void add_gpage(unsigned long addr, unsigned long page_size,
unsigned long number_of_pages);
extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
#ifdef __powerpc64__
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define STACK_FRAME_OVERHEAD 112 /* size of minimum stack frame */
#define STACK_FRAME_LR_SAVE 2 /* Location of LR in stack frame */
#define STACK_FRAME_REGS_MARKER ASM_CONST(0x7265677368657265)
blr
_GLOBAL(__setup_cpu_460ex)
_GLOBAL(__setup_cpu_460gt)
- b __init_fpu_44x
+ mflr r4
+ bl __init_fpu_44x
+ bl __fixup_440A_mcheck
+ mtlr r4
+ blr
+
+_GLOBAL(__setup_cpu_440x5)
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_440x5(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
.cpu_user_features = COMMON_USER_BOOKE,
.icache_bsize = 32,
.dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_440x5,
+ .machine_check = machine_check_440A,
.platform = "ppc440",
},
{ /* 460EX */
for_each_sg(sgl, sg, nents, i) {
sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
sg->dma_length = sg->length;
+ __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
}
return nents;
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
- crclr so
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
ACCOUNT_CPU_USER_ENTRY(r10, r11)
+ /*
+ * This "crclr so" clears CR0.SO, which is the error indication on
+ * return from this system call. There must be no cmp instruction
+ * between it and the "mfcr r9" below, otherwise if XER.SO is set,
+ * CR0.SO will get set, causing all system calls to appear to fail.
+ */
+ crclr so
std r2,GPR2(r1)
std r3,GPR3(r1)
std r4,GPR4(r1)
* (no broadcast)
*/
_GLOBAL(_tlbil_va)
+ mfmsr r10
+ wrteei 0
slwi r4,r4,16
mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
tlbsx 0,r3
mfspr r4,SPRN_MAS1 /* check valid */
andis. r3,r4,MAS1_VALID@h
- beqlr
+ beq 1f
rlwinm r4,r4,0,1,31
mtspr SPRN_MAS1,r4
tlbwe
msync
isync
+1: wrtee r10
blr
#endif /* CONFIG_FSL_BOOKE */
* parsing
*/
dn = pci_device_to_OF_node(pdev);
- if (dn)
- return of_irq_map_one(dn, 0, out_irq);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
/* Ok, we don't, time to have fun. Let's start by building up an
* interrupt spec. we assume #interrupt-cells is 1, which is standard
BUG_ON(!c->hotpluggable);
+#ifdef CONFIG_PPC64
if (!firmware_has_feature(FW_FEATURE_ISERIES) &&
cpu_has_feature(CPU_FTR_SMT))
sysdev_remove_file(s, &attr_smt_snooze_delay);
+#endif
/* PMC stuff */
switch (cur_cpu_spec->pmc_type) {
}
}
+void kvmppc_core_destroy_mmu(struct kvm_vcpu *vcpu)
+{
+ int i;
+
+ for (i = 0; i <= tlb_44x_hwater; i++)
+ kvmppc_44x_shadow_release(vcpu, i);
+}
+
void kvmppc_tlbe_set_modified(struct kvm_vcpu *vcpu, unsigned int i)
{
vcpu->arch.shadow_tlb_mod[i] = 1;
void kvm_arch_vcpu_uninit(struct kvm_vcpu *vcpu)
{
+ kvmppc_core_destroy_mmu(vcpu);
}
/* Note: clearing MSR[DE] just means that the debug interrupt will not be
be = blk->start + blk->size;
if (s >= bs && e <= be)
break;
+ blk = NULL;
}
if (blk == NULL)
unsigned long __init mmu_mapin_ram(void)
{
- unsigned long v, s;
+ unsigned long v, s, mapped;
phys_addr_t p;
v = KERNELBASE;
s -= LARGE_PAGE_SIZE_4M;
}
- return total_lowmem - s;
+ mapped = total_lowmem - s;
+
+ /* If the size of RAM is not an exact power of two, we may not
+ * have covered RAM in its entirety with 16 and 4 MiB
+ * pages. Consequently, restrict the top end of RAM currently
+ * allocable so that calls to the LMB to allocate PTEs for "tail"
+ * coverage with normal-sized pages (or other reasons) do not
+ * attempt to allocate outside the allowed range.
+ */
+
+ __initial_memory_limit_addr = memstart_addr + mapped;
+
+ return mapped;
}
{
struct hstate *hstate = hstate_file(file);
int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+ if (!mmu_huge_psizes[mmu_psize])
+ return -EINVAL;
return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
}
return err;
}
-void set_huge_psize(int psize)
+static void __init set_huge_psize(int psize)
{
/* Check that it is a page size supported by the hardware and
* that it fits within pagetable limits. */
.priority = 1 /* Must run before sched domains notifier. */
};
+static void mark_reserved_regions_for_nid(int nid)
+{
+ struct pglist_data *node = NODE_DATA(nid);
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ unsigned long physbase = lmb.reserved.region[i].base;
+ unsigned long size = lmb.reserved.region[i].size;
+ unsigned long start_pfn = physbase >> PAGE_SHIFT;
+ unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
+ struct node_active_region node_ar;
+ unsigned long node_end_pfn = node->node_start_pfn +
+ node->node_spanned_pages;
+
+ /*
+ * Check to make sure that this lmb.reserved area is
+ * within the bounds of the node that we care about.
+ * Checking the nid of the start and end points is not
+ * sufficient because the reserved area could span the
+ * entire node.
+ */
+ if (end_pfn <= node->node_start_pfn ||
+ start_pfn >= node_end_pfn)
+ continue;
+
+ get_node_active_region(start_pfn, &node_ar);
+ while (start_pfn < end_pfn &&
+ node_ar.start_pfn < node_ar.end_pfn) {
+ unsigned long reserve_size = size;
+ /*
+ * if reserved region extends past active region
+ * then trim size to active region
+ */
+ if (end_pfn > node_ar.end_pfn)
+ reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
+ - (start_pfn << PAGE_SHIFT);
+ /*
+ * Only worry about *this* node, others may not
+ * yet have valid NODE_DATA().
+ */
+ if (node_ar.nid == nid) {
+ dbg("reserve_bootmem %lx %lx nid=%d\n",
+ physbase, reserve_size, node_ar.nid);
+ reserve_bootmem_node(NODE_DATA(node_ar.nid),
+ physbase, reserve_size,
+ BOOTMEM_DEFAULT);
+ }
+ /*
+ * if reserved region is contained in the active region
+ * then done.
+ */
+ if (end_pfn <= node_ar.end_pfn)
+ break;
+
+ /*
+ * reserved region extends past the active region
+ * get next active region that contains this
+ * reserved region
+ */
+ start_pfn = node_ar.end_pfn;
+ physbase = start_pfn << PAGE_SHIFT;
+ size = size - reserve_size;
+ get_node_active_region(start_pfn, &node_ar);
+ }
+ }
+}
+
+
void __init do_init_bootmem(void)
{
int nid;
- unsigned int i;
min_low_pfn = 0;
max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
- /* Allocate the node structure node local if possible */
+ /*
+ * Allocate the node structure node local if possible
+ *
+ * Be careful moving this around, as it relies on all
+ * previous nodes' bootmem to be initialized and have
+ * all reserved areas marked.
+ */
NODE_DATA(nid) = careful_allocation(nid,
sizeof(struct pglist_data),
SMP_CACHE_BYTES, end_pfn);
start_pfn, end_pfn);
free_bootmem_with_active_regions(nid, end_pfn);
- }
-
- /* Mark reserved regions */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long physbase = lmb.reserved.region[i].base;
- unsigned long size = lmb.reserved.region[i].size;
- unsigned long start_pfn = physbase >> PAGE_SHIFT;
- unsigned long end_pfn = ((physbase + size) >> PAGE_SHIFT);
- struct node_active_region node_ar;
-
- get_node_active_region(start_pfn, &node_ar);
- while (start_pfn < end_pfn &&
- node_ar.start_pfn < node_ar.end_pfn) {
- unsigned long reserve_size = size;
- /*
- * if reserved region extends past active region
- * then trim size to active region
- */
- if (end_pfn > node_ar.end_pfn)
- reserve_size = (node_ar.end_pfn << PAGE_SHIFT)
- - (start_pfn << PAGE_SHIFT);
- dbg("reserve_bootmem %lx %lx nid=%d\n", physbase,
- reserve_size, node_ar.nid);
- reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase,
- reserve_size, BOOTMEM_DEFAULT);
- /*
- * if reserved region is contained in the active region
- * then done.
- */
- if (end_pfn <= node_ar.end_pfn)
- break;
-
- /*
- * reserved region extends past the active region
- * get next active region that contains this
- * reserved region
- */
- start_pfn = node_ar.end_pfn;
- physbase = start_pfn << PAGE_SHIFT;
- size = size - reserve_size;
- get_node_active_region(start_pfn, &node_ar);
- }
-
- }
-
- for_each_online_node(nid)
+ /*
+ * Be very careful about moving this around. Future
+ * calls to careful_allocation() depend on this getting
+ * done correctly.
+ */
+ mark_reserved_regions_for_nid(nid);
sparse_memory_present_with_active_regions(nid);
+ }
}
void __init paging_init(void)
struct axon_msic *msic = get_irq_data(irq);
u32 write_offset, msi;
int idx;
+ int retry = 0;
write_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG);
pr_debug("axon_msi: original write_offset 0x%x\n", write_offset);
/* write_offset doesn't wrap properly, so we have to mask it */
write_offset &= MSIC_FIFO_SIZE_MASK;
- while (msic->read_offset != write_offset) {
+ while (msic->read_offset != write_offset && retry < 100) {
idx = msic->read_offset / sizeof(__le32);
msi = le32_to_cpu(msic->fifo_virt[idx]);
msi &= 0xFFFF;
pr_debug("axon_msi: woff %x roff %x msi %x\n",
write_offset, msic->read_offset, msi);
+ if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host) {
+ generic_handle_irq(msi);
+ msic->fifo_virt[idx] = cpu_to_le32(0xffffffff);
+ } else {
+ /*
+ * Reading the MSIC_WRITE_OFFSET_REG does not
+ * reliably flush the outstanding DMA to the
+ * FIFO buffer. Here we were reading stale
+ * data, so we need to retry.
+ */
+ udelay(1);
+ retry++;
+ pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ continue;
+ }
+
+ if (retry) {
+ pr_debug("axon_msi: late irq 0x%x, retry %d\n",
+ msi, retry);
+ retry = 0;
+ }
+
msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
msic->read_offset &= MSIC_FIFO_SIZE_MASK;
+ }
- if (msi < NR_IRQS && irq_map[msi].host == msic->irq_host)
- generic_handle_irq(msi);
- else
- pr_debug("axon_msi: invalid irq 0x%x!\n", msi);
+ if (retry) {
+ printk(KERN_WARNING "axon_msi: irq timed out\n");
+
+ msic->read_offset += MSIC_FIFO_ENTRY_SIZE;
+ msic->read_offset &= MSIC_FIFO_SIZE_MASK;
}
desc->chip->eoi(irq);
dn->full_name);
goto out_free_fifo;
}
+ memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES);
msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
NR_IRQS, &msic_host_ops, 0);
MSIC_CTRL_IRQ_ENABLE | MSIC_CTRL_ENABLE |
MSIC_CTRL_FIFO_SIZE);
+ msic->read_offset = dcr_read(msic->dcr_host, MSIC_WRITE_OFFSET_REG)
+ & MSIC_FIFO_SIZE_MASK;
+
device->dev.platform_data = msic;
ppc_md.setup_msi_irqs = axon_msi_setup_msi_irqs;
return cpus_weight(cpu_possible_map);
}
-static void __devinit smp_iic_setup_cpu(int cpu)
+static void __devinit smp_cell_setup_cpu(int cpu)
{
if (cpu != boot_cpuid)
iic_setup_cpu();
+
+ /*
+ * change default DABRX to allow user watchpoints
+ */
+ mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
}
static DEFINE_SPINLOCK(timebase_lock);
.message_pass = smp_iic_message_pass,
.probe = smp_iic_probe,
.kick_cpu = smp_cell_kick_cpu,
- .setup_cpu = smp_iic_setup_cpu,
+ .setup_cpu = smp_cell_setup_cpu,
.cpu_bootable = smp_cell_cpu_bootable,
};
if (offset >= ps_size)
return VM_FAULT_SIGBUS;
+ if (fatal_signal_pending(current))
+ return VM_FAULT_SIGBUS;
+
/*
* Because we release the mmap_sem, the context may be destroyed while
* we're in spu_wait. Grab an extra reference so it isn't destroyed
answer Y or M. Otherwise say N.
config PPC_BESTCOMM_ATA
- tristate "Bestcomm ATA task support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the ATA task.
config PPC_BESTCOMM_FEC
- tristate "Bestcomm FEC tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the FEC tasks.
config PPC_BESTCOMM_GEN_BD
- tristate "Bestcomm GenBD tasks support"
+ tristate
depends on PPC_BESTCOMM
- default n
help
This option enables the support for the GenBD tasks.
cpuid = first_cpu(tmp);
}
- return cpuid;
+ return get_hard_smp_processor_id(cpuid);
}
#else
static int irq_choose_cpu(unsigned int virt_irq)
void __init mpic_init(struct mpic *mpic)
{
int i;
+ int cpu;
BUG_ON(mpic->num_sources == 0);
mpic_pasemi_msi_init(mpic);
+ if (mpic->flags & MPIC_PRIMARY)
+ cpu = hard_smp_processor_id();
+ else
+ cpu = 0;
+
for (i = 0; i < mpic->num_sources; i++) {
/* start with vector = source number, and masked */
u32 vecpri = MPIC_VECPRI_MASK | i |
continue;
/* init hw */
mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri);
- mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
- 1 << hard_smp_processor_id());
+ mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
}
/* Init spurious vector */
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
- res.start, regs);
+ printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+ (unsigned long long) res.start, regs);
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Thu Aug 21 19:43:29 2008
+# Linux kernel version: 2.6.28-rc6
+# Thu Nov 27 11:00:49 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
CONFIG_GROUP_SCHED=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Base setup
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
#
# I/O subsystem configuration
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_IUCV=m
+CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_NF_CONNTRACK_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_ACT_NAT=m
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_PCMCIA is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
#
# SCSI device support
CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
+# CONFIG_REGULATOR is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
#
# File systems
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
#
# Ciphers
#
-# CONFIG_CRYPTO_AES is not set
+CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
# CONFIG_ZCRYPT_MONOLITHIC is not set
# Library routines
#
CONFIG_BITREVERSE=m
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
- if (mm->context.has_pgste)
- ptep_rcp_copy(ptep);
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
if (mm->context.noexec)
pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
psw_t psw;
unsigned long gprs[NUM_GPRS];
unsigned long orig_gpr2;
+ unsigned short svcnr;
unsigned short ilc;
- unsigned short trap;
};
#endif
extern void user_enable_single_step(struct task_struct *);
extern void user_disable_single_step(struct task_struct *);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
#define user_stack_pointer(regs)((regs)->gprs[15])
static inline long syscall_get_nr(struct task_struct *task,
struct pt_regs *regs)
{
- if (regs->trap != __LC_SVC_OLD_PSW)
- return -1;
- return regs->gprs[2];
+ return regs->svcnr ? regs->svcnr : -1;
}
static inline void syscall_rollback(struct task_struct *task,
unsigned int i, unsigned int n,
unsigned long *args)
{
+ unsigned long mask = -1UL;
+
BUG_ON(i + n > 6);
#ifdef CONFIG_COMPAT
- if (test_tsk_thread_flag(task, TIF_31BIT)) {
- if (i + n == 6)
- args[--n] = (u32) regs->args[0];
- while (n-- > 0)
- args[n] = (u32) regs->gprs[2 + i + n];
- }
+ if (test_tsk_thread_flag(task, TIF_31BIT))
+ mask = 0xffffffff;
#endif
if (i + n == 6)
- args[--n] = regs->args[0];
- memcpy(args, ®s->gprs[2 + i], n * sizeof(args[0]));
+ args[--n] = regs->args[0] & mask;
+ while (n-- > 0)
+ if (i + n > 0)
+ args[n] = regs->gprs[2 + i + n] & mask;
+ if (i == 0)
+ args[0] = regs->orig_gpr2 & mask;
}
static inline void syscall_set_arguments(struct task_struct *task,
BUG_ON(i + n > 6);
if (i + n == 6)
regs->args[0] = args[--n];
- memcpy(®s->gprs[2 + i], args, n * sizeof(args[0]));
+ while (n-- > 0)
+ if (i + n > 0)
+ regs->gprs[2 + i + n] = args[n];
+ if (i == 0)
+ regs->orig_gpr2 = args[0];
}
#endif /* _ASM_SYSCALL_H */
DEFINE(__PT_GPRS, offsetof(struct pt_regs, gprs));
DEFINE(__PT_ORIG_GPR2, offsetof(struct pt_regs, orig_gpr2));
DEFINE(__PT_ILC, offsetof(struct pt_regs, ilc));
- DEFINE(__PT_TRAP, offsetof(struct pt_regs, trap));
+ DEFINE(__PT_SVCNR, offsetof(struct pt_regs, svcnr));
DEFINE(__PT_SIZE, sizeof(struct pt_regs));
BLANK();
DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain));
return err;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 60
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
.macro CREATE_STACK_FRAME psworg,savearea
s %r15,BASED(.Lc_spsize) # make room for registers & psw
mvc SP_PSW(8,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
st %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stm %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
st %r12,__SF_BACKCHAIN(%r15) # clear back chain
#endif
sysc_do_svc:
l %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- sla %r7,2 # *4 and test for svc 0
+ ltr %r7,%r7 # test for svc 0
bnz BASED(sysc_nr_ok) # svc number > 0
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
bnl BASED(sysc_nr_ok)
lr %r7,%r1 # copy svc number to %r7
- sla %r7,2 # *4
sysc_nr_ok:
mvc SP_ARGS(4,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sll %r7,2 # svc number *4
l %r8,BASED(.Lsysc_table)
tm __TI_flags+3(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
l %r8,0(%r7,%r8) # get system call addr.
sysc_restart:
ni __TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
l %r7,SP_R2(%r15) # load new svc number
- sla %r7,2
mvc SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
lm %r2,%r6,SP_R2(%r15) # load svc arguments
b BASED(sysc_do_restart) # restart svc
#
sysc_singlestep:
ni __TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_return) # load adr. of system return
bnl BASED(sysc_tracenogo)
l %r8,BASED(.Lsysc_table)
lr %r7,%r2
- sll %r7,2 # *4
+ sll %r7,2 # svc number *4
l %r8,0(%r7,%r8)
sysc_tracego:
lm %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- mvi SP_TRAP+1(%r15),0x28 # set trap indication to pgm check
+ mvi SP_SVCNR(%r15),0xff # set trap indication to pgm check
+ mvi SP_SVCNR+1(%r15),0xff
la %r2,SP_PTREGS(%r15) # address of register-save area
l %r1,BASED(.Lhandle_per) # load adr. of per handler
la %r14,BASED(sysc_restore)# load adr. of system return
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
-SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
+SP_SVCNR = STACK_FRAME_OVERHEAD + __PT_SVCNR
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
- la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
- icm %r12,12,__LC_SVC_ILC
+ icm %r12,3,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
- st %r12,SP_ILC(%r15)
+ st %r12,SP_SVCNR(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
- slag %r7,%r7,2 # *4 and test for svc 0
+ ltgr %r7,%r7 # test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
- slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
+ sth %r7,SP_SVCNR(%r15)
+ sllg %r7,%r7,2 # svc number * 4
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
- slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
- ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
lghi %r0,NR_syscalls
clgr %r0,%r2
jnh sysc_tracenogo
- slag %r7,%r2,2 # *4
+ sllg %r7,%r2,2 # svc number *4
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
# per was called from kernel, must be kprobes
#
kernel_per:
- lhi %r0,__LC_PGM_OLD_PSW
- sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
+ xc SP_SVCNR(2,%r15),SP_SVCNR(%r15) # clear svc number
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_restore # load adr. of system ret, no work
jg do_single_step # branch to do_single_step
/*
* Initial thread structure.
*
- * We need to make sure that this is 8192-byte aligned due to the
+ * We need to make sure that this is THREAD_SIZE aligned due to the
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
* debugger stored an invalid system call number. Skip
* the system call and the system call restart handling.
*/
- regs->trap = -1;
+ regs->svcnr = 0;
ret = -1;
}
current->thread.fp_regs.fpc &= FPC_VALID_MASK;
restore_fp_regs(¤t->thread.fp_regs);
- regs->trap = -1; /* disable syscall checks */
+ regs->svcnr = 0; /* disable syscall checks */
return 0;
}
oldset = ¤t->blocked;
/* Are we from a system call? */
- if (regs->trap == __LC_SVC_OLD_PSW) {
+ if (regs->svcnr) {
continue_addr = regs->psw.addr;
restart_addr = continue_addr - regs->ilc;
retval = regs->gprs[2];
case -ERESTART_RESTARTBLOCK:
regs->gprs[2] = -EINTR;
}
- regs->trap = -1; /* Don't deal with this again. */
+ regs->svcnr = 0; /* Don't deal with this again. */
}
/* Get signal to deliver. When running under ptrace, at this point
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 jiffies_timer_cc;
+static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
*/
unsigned long long sched_clock(void)
{
- return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
+ return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
}
/*
*/
void __init time_init(void)
{
- u64 init_timer_cc;
-
- init_timer_cc = reset_tod_clock();
- jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
+ sched_clock_base_cc = reset_tod_clock();
/* set xtime */
- tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
delta = -delta;
adjust.offset = -ticks * (1000000 / HZ);
}
- jiffies_timer_cc += delta;
+ sched_clock_base_cc += delta;
if (adjust.offset != 0) {
printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
adjust.offset);
* Written by Martin Schwidefsky (schwidefsky@de.ibm.com)
*/
+#include <asm/thread_info.h>
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
}
_edata = .; /* End of data section */
- . = ALIGN(2 * PAGE_SIZE); /* init_task */
+ . = ALIGN(THREAD_SIZE); /* init_task */
.data.init_task : {
*(.data.init_task)
}
u8 order_code;
int rc;
+ /* sigp in userspace can exit */
+ if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
+ return kvm_s390_inject_program_int(vcpu,
+ PGM_PRIVILEGED_OPERATION);
+
order_code = disp2;
if (base2)
order_code += vcpu->arch.guest_gprs[base2];
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
+ depends on SUPERH32 && (!SH_DREAMCAST && !SH_SH4202_MICRODEV && \
+ !SH_7751_SYSTEMH && !HD64461)
config GENERIC_IRQ_PROBE
def_bool y
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/lock.h>
#ifdef __KERNEL__
+#include <asm/system.h>
+
static inline bool pt_regs_is_syscall(struct pt_regs *regs)
{
return (regs->psr & PSR_SYSCALL);
return (regs->psr &= ~PSR_SYSCALL);
}
+#define arch_ptrace_stop_needed(exit_code, info) \
+({ flush_user_windows(); \
+ current_thread_info()->w_saved != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+ synchronize_user_stack()
+
#define user_mode(regs) (!((regs)->psr & PSR_PS))
#define instruction_pointer(regs) ((regs)->pc)
#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
#ifdef __KERNEL__
#include <linux/threads.h>
+#include <asm/system.h>
static inline int pt_regs_trap_type(struct pt_regs *regs)
{
return (regs->tstate &= ~TSTATE_SYSCALL);
}
+#define arch_ptrace_stop_needed(exit_code, info) \
+({ flush_user_windows(); \
+ get_thread_wsaved() != 0; \
+})
+
+#define arch_ptrace_stop(exit_code, info) \
+ synchronize_user_stack()
+
struct global_reg_snapshot {
unsigned long tstate;
unsigned long tpc;
};
extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#define force_successful_syscall_return() \
do { current_thread_info()->syscall_noerror = 1; \
} while (0)
unsigned int fsr_storage;
-void __init cpu_probe(void)
+void __cpuinit cpu_probe(void)
{
int psr_impl, psr_vers, fpu_vers;
int i, psr;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .text
+ .section .text.head,"ax"
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
#include "irq.h"
-volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
+volatile unsigned long cpu_callin_map[NR_CPUS] __cpuinitdata = {0,};
unsigned char boot_cpu_id = 0;
unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
panic("SMP bolixed\n");
}
-struct linux_prom_registers smp_penguin_ctable __initdata = { 0 };
+struct linux_prom_registers smp_penguin_ctable __cpuinitdata = { 0 };
void smp_send_reschedule(int cpu)
{
"i" (ASI_M_CTL));
}
-void __init smp4d_callin(void)
+void __cpuinit smp4d_callin(void)
{
int cpuid = hard_smp4d_processor_id();
extern spinlock_t sun4d_imsk_lock;
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = hard_smp4d_processor_id();
extern unsigned int lvl14_resolution;
-static void __init smp_setup_percpu_timer(void)
+static void __cpuinit smp_setup_percpu_timer(void)
{
int cpu = smp_processor_id();
.globl sun4m_cpu_startup, __smp4m_processor_id
.globl sun4d_cpu_startup, __smp4d_processor_id
- __INIT
+ __CPUINIT
.align 4
/* When we start up a cpu for the first time it enters this routine.
/* CPUID in bootbus can be found at PA 0xff0140000 */
#define SUN4D_BOOTBUS_CPUID 0xf0140000
- __INIT
+ __CPUINIT
.align 4
sun4d_cpu_startup:
.text 0xf0004000 :
{
_text = .;
+ *(.text.head)
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
/* Paging initialization on the Sparc Reference MMU. */
extern void sparc_context_init(int);
-void (*poke_srmmu)(void) __initdata = NULL;
+void (*poke_srmmu)(void) __cpuinitdata = NULL;
extern unsigned long bootmem_init(unsigned long *pages_avail);
(int)vac_cache_size, (int)vac_line_size);
}
-static void __init poke_hypersparc(void)
+static void __cpuinit poke_hypersparc(void)
{
volatile unsigned long clear;
unsigned long mreg = srmmu_get_mmureg();
hypersparc_setup_blockops();
}
-static void __init poke_cypress(void)
+static void __cpuinit poke_cypress(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long faddr, tagval;
init_cypress_common();
}
-static void __init poke_swift(void)
+static void __cpuinit poke_swift(void)
{
unsigned long mreg;
}
-static void __init poke_turbosparc(void)
+static void __cpuinit poke_turbosparc(void)
{
unsigned long mreg = srmmu_get_mmureg();
unsigned long ccreg;
poke_srmmu = poke_turbosparc;
}
-static void __init poke_tsunami(void)
+static void __cpuinit poke_tsunami(void)
{
unsigned long mreg = srmmu_get_mmureg();
tsunami_setup_blockops();
}
-static void __init poke_viking(void)
+static void __cpuinit poke_viking(void)
{
unsigned long mreg = srmmu_get_mmureg();
static int smp_catch;
break;
case PTRACE_SETFPREGS64:
- ret = copy_regset_to_user(child, view, REGSET_FP,
+ ret = copy_regset_from_user(child, view, REGSET_FP,
0 * sizeof(u64),
33 * sizeof(u64),
fps);
return kern_base + (val - KERNBASE);
}
-static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
+static void __cpuinit ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
*/
static struct thread_info *cpu_new_thread = NULL;
-static int __devinit smp_boot_one_cpu(unsigned int cpu)
+static int __cpuinit smp_boot_one_cpu(unsigned int cpu)
{
struct trap_per_cpu *tb = &trap_block[cpu];
unsigned long entry =
#define VIS_OPF_SHIFT 5
#define VIS_OPF_MASK (0x1ff << VIS_OPF_SHIFT)
-#define RS1(INSN) (((INSN) >> 24) & 0x1f)
+#define RS1(INSN) (((INSN) >> 14) & 0x1f)
#define RS2(INSN) (((INSN) >> 0) & 0x1f)
#define RD(INSN) (((INSN) >> 25) & 0x1f)
unsigned long i;
rs1 = fpd_regval(f, RS1(insn));
- rs2 = fpd_regval(f, RS1(insn));
+ rs2 = fpd_regval(f, RS2(insn));
rd = fpd_regaddr(f, RD(insn));
rd_val = *rd;
if (get_user(insn, (u32 __user *) pc))
return -EFAULT;
+ save_and_clear_fpu();
+
opf = (insn & VIS_OPF_MASK) >> VIS_OPF_SHIFT;
switch (opf) {
default:
if (fault_addr < start || fault_addr >= end) {
*offset = 0;
} else {
- *offset = start - fault_addr;
+ *offset = fault_addr - start;
size = end - fault_addr;
}
return size;
return nid;
}
-static void add_node_ranges(void)
+static void __init add_node_ranges(void)
{
int i;
#include <linux/slab.h>
#include <linux/syscalls.h>
#include <linux/utsname.h>
+#include <linux/socket.h>
+#include <linux/un.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
/* long to avoid size mismatch warnings from gcc */
long sock;
int err;
- char file[256];
+ char file[UNIX_PATH_MAX];
if (umid_file_name("mconsole", file, sizeof(file)))
return -1;
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
+ depends on BROKEN
help
This adds a ptrace interface to the hardware's branch trace store.
{
u8 pending;
asm volatile("int $0x16; setnz %0"
- : "=rm" (pending)
+ : "=qm" (pending)
: "a" (0x0100));
return pending;
}
/* Pointer to PCI device of this IOMMU */
struct pci_dev *dev;
- /*
- * Capability pointer. There could be more than one IOMMU per PCI
- * device function if there are more than one AMD IOMMU capability
- * pointers.
- */
- u16 cap_ptr;
-
/* physical address of MMIO space */
u64 mmio_phys;
/* virtual address of MMIO space */
/* capabilities of that IOMMU read from ACPI */
u32 cap;
+ /*
+ * Capability pointer. There could be more than one IOMMU per PCI
+ * device function if there are more than one AMD IOMMU capability
+ * pointers.
+ */
+ u16 cap_ptr;
+
/* pci domain of this IOMMU */
u16 pci_seg;
/* size of command buffer */
u32 cmd_buf_size;
- /* event buffer virtual address */
- u8 *evt_buf;
/* size of event buffer */
u32 evt_buf_size;
+ /* event buffer virtual address */
+ u8 *evt_buf;
/* MSI number for event interrupt */
u16 evt_msi_num;
- /* if one, we need to send a completion wait command */
- int need_sync;
-
/* true if interrupts for this IOMMU are already enabled */
bool int_enabled;
+ /* if one, we need to send a completion wait command */
+ int need_sync;
+
/* default dma_ops domain for that IOMMU */
struct dma_ops_domain *default_dom;
};
/* Make sure we keep the same behaviour */
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
-#ifdef CONFIG_X86_32
- return 0;
-#else
+#ifdef CONFIG_X86_64
struct dma_mapping_ops *ops = get_dma_ops(dev);
if (ops->mapping_error)
return ops->mapping_error(dev, dma_addr);
- return (dma_addr == bad_dma_address);
#endif
+ return (dma_addr == bad_dma_address);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#ifndef _ASM_X86_DS_H
#define _ASM_X86_DS_H
-#ifdef CONFIG_X86_DS
#include <linux/types.h>
#include <linux/init.h>
+#ifdef CONFIG_X86_DS
+
struct task_struct;
/*
#else /* CONFIG_X86_DS */
-#define ds_init_intel(config) do {} while (0)
+struct cpuinfo_x86;
+static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
#endif /* CONFIG_X86_DS */
#endif /* _ASM_X86_DS_H */
*/
#define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
-#if defined(CONFIG_GART_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-#else
-/* No IOMMU */
-
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME) (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME) (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-
-#endif
-
#endif /* __KERNEL__ */
#endif /* _ASM_X86_PCI_64_H */
extern int do_set_thread_area(struct task_struct *p, int idx,
struct user_desc __user *info, int can_allocate);
-#define __ARCH_WANT_COMPAT_SYS_PTRACE
-
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
void set_pci_bus_resources_arch_default(struct pci_bus *b);
#ifdef CONFIG_SMP
-#define mc_capable() (boot_cpu_data.x86_max_cores > 1)
+#define mc_capable() (cpus_weight(per_cpu(cpu_core_map, 0)) != nr_cpu_ids)
#define smt_capable() (smp_num_siblings > 1)
#endif
} __attribute__((packed));
/* Function prototypes for bootstrapping */
+#ifdef CONFIG_VMI
extern void vmi_init(void);
+extern void vmi_activate(void);
extern void vmi_bringup(void);
-extern void vmi_apply_boot_page_allocations(void);
+#else
+static inline void vmi_init(void) {}
+static inline void vmi_activate(void) {}
+static inline void vmi_bringup(void) {}
+#endif
/* State needed to start an application processor in an SMP system. */
struct vmi_ap_state {
obj-y += process.o
obj-y += i387.o xsave.o
obj-y += ptrace.o
-obj-y += ds.o
+obj-$(CONFIG_X86_DS) += ds.o
obj-$(CONFIG_X86_32) += tls.o
obj-$(CONFIG_IA32_EMULATION) += tls.o
obj-y += step.o
spin_lock_irqsave(&iommu->lock, flags);
ret = __iommu_queue_command(iommu, cmd);
+ if (!ret)
+ iommu->need_sync = 1;
spin_unlock_irqrestore(&iommu->lock, flags);
return ret;
cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
- iommu->need_sync = 0;
-
spin_lock_irqsave(&iommu->lock, flags);
+ if (!iommu->need_sync)
+ goto out;
+
+ iommu->need_sync = 0;
+
ret = __iommu_queue_command(iommu, &cmd);
if (ret)
status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
- if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
- printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
+ if (unlikely(i == EXIT_LOOP_COUNT))
+ panic("AMD IOMMU: Completion wait loop failed\n");
+
out:
spin_unlock_irqrestore(&iommu->lock, flags);
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
ret = iommu_queue_command(iommu, &cmd);
- iommu->need_sync = 1;
-
return ret;
}
u64 __pte, *pte, *page;
bus_addr = PAGE_ALIGN(bus_addr);
- phys_addr = PAGE_ALIGN(bus_addr);
+ phys_addr = PAGE_ALIGN(phys_addr);
/* only support 512GB address spaces for now */
if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
continue;
p2 = IOMMU_PTE_PAGE(p1[i]);
- for (j = 0; j < 512; ++i) {
+ for (j = 0; j < 512; ++j) {
if (!IOMMU_PTE_PRESENT(p2[j]))
continue;
p3 = IOMMU_PTE_PAGE(p2[j]);
write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
iommu_queue_inv_dev_entry(iommu, devid);
-
- iommu->need_sync = 1;
}
/*****************************************************************************
print_devid(_bdf, 1);
}
+ if (domain_for_device(_bdf) == NULL)
+ set_device_domain(*iommu, *domain, _bdf);
+
return 1;
}
if (address >= dom->aperture_size)
return;
- WARN_ON(address & 0xfffULL || address > dom->aperture_size);
+ WARN_ON(address & ~PAGE_MASK || address >= dom->aperture_size);
pte = dom->pte_pages[IOMMU_PTE_L1_INDEX(address)];
pte += IOMMU_PTE_L0_INDEX(address);
/*
* This function contains common code for mapping of a physically
- * contiguous memory region into DMA address space. It is uses by all
- * mapping functions provided by this IOMMU driver.
+ * contiguous memory region into DMA address space. It is used by all
+ * mapping functions provided with this IOMMU driver.
* Must be called with the domain lock held.
*/
static dma_addr_t __map_single(struct device *dev,
dma_addr_t i, start;
unsigned int pages;
- if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
+ if ((dma_addr == bad_dma_address) ||
+ (dma_addr + size > dma_dom->aperture_size))
return;
pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
if (addr == bad_dma_address)
goto out;
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
__unmap_single(iommu, domain->priv, dma_addr, size, dir);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
goto unmap;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
s->dma_address = s->dma_length = 0;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
}
goto out;
}
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
out:
spin_unlock_irqrestore(&domain->lock, flags);
__unmap_single(iommu, domain->priv, dma_addr, size, DMA_BIDIRECTIONAL);
- if (unlikely(iommu->need_sync))
- iommu_completion_wait(iommu);
+ iommu_completion_wait(iommu);
spin_unlock_irqrestore(&domain->lock, flags);
memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
&entry, sizeof(entry));
+ /* set head and tail to zero manually */
+ writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+ writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
return cmd_buf;
goto free;
/* IOMMU rlookup table - find the IOMMU for a specific device */
- amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
+ amd_iommu_rlookup_table = (void *)__get_free_pages(
+ GFP_KERNEL | __GFP_ZERO,
get_order(rlookup_table_size));
if (amd_iommu_rlookup_table == NULL)
goto free;
}
}
-void enable_IR_x2apic(void)
+void __init enable_IR_x2apic(void)
{
#ifdef CONFIG_INTR_REMAP
int ret;
u32 i = 0;
if (cpu_family == CPU_HW_PSTATE) {
- rdmsr(MSR_PSTATE_STATUS, lo, hi);
- i = lo & HW_PSTATE_MASK;
- data->currpstate = i;
+ if (data->currpstate == HW_PSTATE_INVALID) {
+ /* read (initial) hw pstate if not yet set */
+ rdmsr(MSR_PSTATE_STATUS, lo, hi);
+ i = lo & HW_PSTATE_MASK;
+
+ /*
+ * a workaround for family 11h erratum 311 might cause
+ * an "out-of-range Pstate if the core is in Pstate-0
+ */
+ if (i >= data->numps)
+ data->currpstate = HW_PSTATE_0;
+ else
+ data->currpstate = i;
+ }
return 0;
}
do {
}
data->cpu = pol->cpu;
+ data->currpstate = HW_PSTATE_INVALID;
if (powernow_k8_cpu_init_acpi(data)) {
/*
* http://www.gnu.org/licenses/gpl.html
*/
+
+enum pstate {
+ HW_PSTATE_INVALID = 0xff,
+ HW_PSTATE_0 = 0,
+ HW_PSTATE_1 = 1,
+ HW_PSTATE_2 = 2,
+ HW_PSTATE_3 = 3,
+ HW_PSTATE_4 = 4,
+ HW_PSTATE_5 = 5,
+ HW_PSTATE_6 = 6,
+ HW_PSTATE_7 = 7,
+};
+
struct powernow_k8_data {
unsigned int cpu;
u32 exttype; /* extended interface = 1 */
/* keep track of the current fid / vid or pstate */
- u32 currvid, currfid, currpstate;
+ u32 currvid;
+ u32 currfid;
+ enum pstate currpstate;
/* the powernow_table includes all frequency and vid/fid pairings:
* fid are the lower 8 bits of the index, vid are the upper 8 bits.
*/
void __cpuinit mcheck_init(struct cpuinfo_x86 *c)
{
- static cpumask_t mce_cpus = CPU_MASK_NONE;
-
mce_cpu_quirks(c);
if (mce_dont_init ||
- cpu_test_and_set(smp_processor_id(), mce_cpus) ||
!mce_available(c))
return;
*/
-#ifdef CONFIG_X86_DS
-
#include <asm/ds.h>
#include <linux/errno.h>
static inline struct ds_context *ds_get_context(struct task_struct *task)
{
struct ds_context *context;
+ unsigned long irq;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
context = (task ? task->thread.ds_ctx : this_system_context);
if (context)
context->count++;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
return context;
}
/*
* Same as ds_get_context, but allocates the context and it's DS
* structure, if necessary; returns NULL; if out of memory.
- *
- * pre: requires ds_lock to be held
*/
static inline struct ds_context *ds_alloc_context(struct task_struct *task)
{
struct ds_context **p_context =
(task ? &task->thread.ds_ctx : &this_system_context);
struct ds_context *context = *p_context;
+ unsigned long irq;
if (!context) {
- spin_unlock(&ds_lock);
-
context = kzalloc(sizeof(*context), GFP_KERNEL);
-
- if (!context) {
- spin_lock(&ds_lock);
+ if (!context)
return NULL;
- }
context->ds = kzalloc(ds_cfg.sizeof_ds, GFP_KERNEL);
if (!context->ds) {
kfree(context);
- spin_lock(&ds_lock);
return NULL;
}
- spin_lock(&ds_lock);
- /*
- * Check for race - another CPU could have allocated
- * it meanwhile:
- */
+ spin_lock_irqsave(&ds_lock, irq);
+
if (*p_context) {
kfree(context->ds);
kfree(context);
- return *p_context;
- }
- *p_context = context;
+ context = *p_context;
+ } else {
+ *p_context = context;
- context->this = p_context;
- context->task = task;
+ context->this = p_context;
+ context->task = task;
- if (task)
- set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
+ if (task)
+ set_tsk_thread_flag(task, TIF_DS_AREA_MSR);
- if (!task || (task == current))
- wrmsr(MSR_IA32_DS_AREA, (unsigned long)context->ds, 0);
-
- get_tracer(task);
+ if (!task || (task == current))
+ wrmsrl(MSR_IA32_DS_AREA,
+ (unsigned long)context->ds);
+ }
+ spin_unlock_irqrestore(&ds_lock, irq);
}
context->count++;
*/
static inline void ds_put_context(struct ds_context *context)
{
+ unsigned long irq;
+
if (!context)
return;
- spin_lock(&ds_lock);
+ spin_lock_irqsave(&ds_lock, irq);
if (--context->count)
goto out;
kfree(context->ds);
kfree(context);
out:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
}
struct ds_context *context;
unsigned long buffer, adj;
const unsigned long alignment = (1 << 3);
+ unsigned long irq;
int error = 0;
if (!ds_cfg.sizeof_ds)
return -EOPNOTSUPP;
- spin_lock(&ds_lock);
-
- error = -ENOMEM;
context = ds_alloc_context(task);
if (!context)
- goto out_unlock;
+ return -ENOMEM;
+
+ spin_lock_irqsave(&ds_lock, irq);
error = -EPERM;
if (!check_tracer(task))
goto out_unlock;
+ get_tracer(task);
+
error = -EALREADY;
if (context->owner[qual] == current)
- goto out_unlock;
+ goto out_put_tracer;
error = -EPERM;
if (context->owner[qual] != NULL)
- goto out_unlock;
+ goto out_put_tracer;
context->owner[qual] = current;
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
error = -ENOMEM;
out_release:
context->owner[qual] = NULL;
ds_put_context(context);
+ put_tracer(task);
+ return error;
+
+ out_put_tracer:
+ spin_unlock_irqrestore(&ds_lock, irq);
+ ds_put_context(context);
+ put_tracer(task);
return error;
out_unlock:
- spin_unlock(&ds_lock);
+ spin_unlock_irqrestore(&ds_lock, irq);
ds_put_context(context);
return error;
}
.sizeof_ds = sizeof(long) * 12,
.sizeof_field = sizeof(long),
.sizeof_rec[ds_bts] = sizeof(long) * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = sizeof(long) * 10
+#else
+ .sizeof_rec[ds_pebs] = sizeof(long) * 18
+#endif
};
static const struct ds_configuration ds_cfg_64 = {
.sizeof_ds = 8 * 12,
.sizeof_field = 8,
.sizeof_rec[ds_bts] = 8 * 3,
+#ifdef __i386__
.sizeof_rec[ds_pebs] = 8 * 10
+#else
+ .sizeof_rec[ds_pebs] = 8 * 18
+#endif
};
static inline void
while (leftovers--)
ds_put_context(context);
}
-#endif /* CONFIG_X86_DS */
stts();
}
-void __init init_thread_xstate(void)
+void __cpuinit init_thread_xstate(void)
{
if (!HAVE_HWFP) {
xstate_size = sizeof(struct i387_soft_struct);
int __init probe_nr_irqs(void)
{
- int idx;
- int nr = 0;
-#ifndef CONFIG_XEN
- int nr_min = 32;
-#else
- int nr_min = NR_IRQS;
-#endif
-
- for (idx = 0; idx < nr_ioapics; idx++)
- nr += io_apic_get_redir_entries(idx) + 1;
-
- /* double it for hotplug and msi and nmi */
- nr <<= 1;
-
- /* something wrong ? */
- if (nr < nr_min)
- nr = nr_min;
- if (WARN_ON(nr > NR_IRQS))
- nr = NR_IRQS;
-
- return nr;
+ return NR_IRQS;
}
/* --------------------------------------------------------------------------
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
+ struct irq_desc *desc;
struct irq_cfg *cfg;
+ cpumask_t mask;
if (skip_ioapic_setup == 1)
return;
* cpu is online.
*/
cfg = irq_cfg(irq);
- if (!cfg->vector)
+ if (!cfg->vector) {
setup_IO_APIC_irq(ioapic, pin, irq,
irq_trigger(irq_entry),
irq_polarity(irq_entry));
+ continue;
+
+ }
+
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ desc = irq_to_desc(irq);
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = TARGET_CPUS;
+
#ifdef CONFIG_INTR_REMAP
- else if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq(irq, TARGET_CPUS);
-#endif
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq(irq, mask);
else
- set_ioapic_affinity_irq(irq, TARGET_CPUS);
+#endif
+ set_ioapic_affinity_irq(irq, mask);
}
}
}
#ifdef CONFIG_X86_LOCAL_APIC
-static void __devinit kvm_setup_secondary_clock(void)
+static void __cpuinit kvm_setup_secondary_clock(void)
{
/*
* Now that the first cpu already had this clocksource initialized,
.name = "microcode",
};
-static void microcode_fini_cpu(int cpu)
+static void __microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- mutex_lock(µcode_mutex);
microcode_ops->microcode_fini_cpu(cpu);
uci->valid = 0;
+}
+
+static void microcode_fini_cpu(int cpu)
+{
+ mutex_lock(µcode_mutex);
+ __microcode_fini_cpu(cpu);
mutex_unlock(µcode_mutex);
}
* to this cpu (a bit of paranoia):
*/
if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
- microcode_fini_cpu(cpu);
+ __microcode_fini_cpu(cpu);
+ printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
+ cpu);
return -1;
}
- if (memcmp(&nsig, &uci->cpu_sig, sizeof(nsig))) {
- microcode_fini_cpu(cpu);
+ if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
+ __microcode_fini_cpu(cpu);
+ printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
+ cpu);
/* Should we look for a new ucode here? */
return 1;
}
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
+ unsigned long flags;
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
csig->pf = 1 << ((val[1] >> 18) & 7);
}
+ /* serialize access to the physical write to MSR 0x79 */
+ spin_lock_irqsave(µcode_update_lock, flags);
+
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
/* see notes above for revision 1.07. Apparent chip bug */
sync_core();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
+ spin_unlock_irqrestore(µcode_update_lock, flags);
+
pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
csig->sig, csig->pf, csig->rev);
printk(KERN_INFO "Using ACPI for processor (LAPIC) "
"configuration information\n");
+ if (!mpf)
+ return;
+
printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
mpf->mpf_specification);
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
#include <asm/paravirt.h>
-static void default_spin_lock_flags(struct raw_spinlock *lock, unsigned long flags)
+static inline void
+default_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
{
__raw_spin_lock(lock);
}
++p;
if (*p == '\0')
break;
- bridge = simple_strtol(p, &endp, 0);
+ bridge = simple_strtoul(p, &endp, 0);
if (p == endp)
break;
spin_lock_irqsave(&iommu_bitmap_lock, flags);
iommu_area_free(iommu_gart_bitmap, offset, size);
+ if (offset >= next_bit)
+ next_bit = offset + size;
spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
}
unsigned long scratch;
long i;
- if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0) {
- printk(KERN_INFO "PCI-GART: No AMD GART found.\n");
+ if (cache_k8_northbridges() < 0 || num_k8_northbridges == 0)
return;
- }
#ifndef CONFIG_AGP_AMD64
no_agp = 1;
printk(KERN_INFO "Command line: %s\n", boot_command_line);
#endif
+ /* VMI may relocate the fixmap; do this before touching ioremap area */
+ vmi_init();
+
early_cpu_init();
early_ioremap_init();
check_efer();
#endif
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
+ /* Must be before kernel pagetables are setup */
+ vmi_activate();
/* after early param, so could get panic from serial */
reserve_early_setup_data();
* fragile that we want to limit the things done here to the
* most necessary things.
*/
-#ifdef CONFIG_VMI
vmi_bringup();
-#endif
cpu_init();
preempt_disable();
smp_callin();
void __init vmi_init(void)
{
- unsigned long flags;
-
if (!vmi_rom)
probe_vmi_rom();
else
reserve_top_address(-vmi_rom->virtual_top);
- local_irq_save(flags);
- activate_vmi();
-
#ifdef CONFIG_X86_IO_APIC
/* This is virtual hardware; timer routing is wired correctly */
no_timer_check = 1;
#endif
+}
+
+void vmi_activate(void)
+{
+ unsigned long flags;
+
+ if (!vmi_rom)
+ return;
+
+ local_irq_save(flags);
+ activate_vmi();
local_irq_restore(flags & X86_EFLAGS_IF);
}
/*
* Enable and initialize the xsave feature.
*/
-void __init xsave_cntxt_init(void)
+void __ref xsave_cntxt_init(void)
{
unsigned int eax, ebx, ecx, edx;
}
rmap_write_protect(vcpu->kvm, sp->gfn);
+ kvm_unlink_unsync_page(vcpu->kvm, sp);
if (vcpu->arch.mmu.sync_page(vcpu, sp)) {
kvm_mmu_zap_page(vcpu->kvm, sp);
return 1;
}
kvm_mmu_flush_tlb(vcpu);
- kvm_unlink_unsync_page(vcpu->kvm, sp);
return 0;
}
r = kvm_read_guest_atomic(vcpu->kvm, gw->pte_gpa[level - 2],
&curr_pte, sizeof(curr_pte));
if (r || curr_pte != gw->ptes[level - 2]) {
+ kvm_mmu_put_page(shadow_page, sptep);
kvm_release_pfn_clean(sw->pfn);
sw->sptep = NULL;
return 1;
if (cpu_has_virtual_nmis()) {
if (vcpu->arch.nmi_pending && !vcpu->arch.nmi_injected) {
- if (vmx_nmi_enabled(vcpu)) {
+ if (vcpu->arch.interrupt.pending) {
+ enable_nmi_window(vcpu);
+ } else if (vmx_nmi_enabled(vcpu)) {
vcpu->arch.nmi_pending = false;
vcpu->arch.nmi_injected = true;
} else {
*cpu_type = "i386/pii";
break;
case 6 ... 8:
+ case 10 ... 11:
*cpu_type = "i386/piii";
break;
case 9:
+ case 13:
*cpu_type = "i386/p6_mobile";
break;
- case 10 ... 13:
- *cpu_type = "i386/p6";
- break;
case 14:
*cpu_type = "i386/core";
break;
int i;
if (!reset_value) {
- reset_value = kmalloc(sizeof(unsigned) * num_counters,
+ reset_value = kmalloc(sizeof(reset_value[0]) * num_counters,
GFP_ATOMIC);
if (!reset_value)
return;
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (reset_value[i]) {
CTRL_READ(low, high, msrs, i);
unsigned int low, high;
int i;
+ if (!reset_value)
+ return;
for (i = 0; i < num_counters; ++i) {
if (!reset_value[i])
continue;
pci_siemens_interrupt_controller);
/*
- * Regular PCI devices have 256 bytes, but AMD Family 10h Opteron ext config
- * have 4096 bytes. Even if the device is capable, that doesn't mean we can
- * access it. Maybe we don't have a way to generate extended config space
- * accesses. So check it
+ * Regular PCI devices have 256 bytes, but AMD Family 10h/11h CPUs have
+ * 4096 bytes configuration space for each function of their processor
+ * configuration space.
*/
-static void fam10h_pci_cfg_space_size(struct pci_dev *dev)
+static void amd_cpu_pci_cfg_space_size(struct pci_dev *dev)
{
dev->cfg_size = pci_cfg_space_size_ext(dev);
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, fam10h_pci_cfg_space_size);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, fam10h_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1200, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1201, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1202, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1203, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1204, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1300, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1301, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1302, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1303, amd_cpu_pci_cfg_space_size);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x1304, amd_cpu_pci_cfg_space_size);
/*
* SB600: Disable BAR1 on device 14.0 to avoid HPET resources from
* For 64-bit, we must skip the Xen hole in the middle of the address
* space, just after the big x86-64 virtual hole.
*/
-static int xen_pgd_walk(struct mm_struct *mm,
- int (*func)(struct mm_struct *mm, struct page *,
- enum pt_level),
- unsigned long limit)
+static int __xen_pgd_walk(struct mm_struct *mm, pgd_t *pgd,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
{
- pgd_t *pgd = mm->pgd;
int flush = 0;
unsigned hole_low, hole_high;
unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
return flush;
}
+static int xen_pgd_walk(struct mm_struct *mm,
+ int (*func)(struct mm_struct *mm, struct page *,
+ enum pt_level),
+ unsigned long limit)
+{
+ return __xen_pgd_walk(mm, mm->pgd, func, limit);
+}
+
/* If we're using split pte locks, then take the page's lock and
return a pointer to it. Otherwise return NULL. */
static spinlock_t *xen_pte_lock(struct page *page, struct mm_struct *mm)
xen_mc_batch();
- if (xen_pgd_walk(mm, xen_pin_page, USER_LIMIT)) {
+ if (__xen_pgd_walk(mm, pgd, xen_pin_page, USER_LIMIT)) {
/* re-enable interrupts for flushing */
xen_mc_issue(0);
PT_PMD);
#endif
- xen_pgd_walk(mm, xen_unpin_page, USER_LIMIT);
+ __xen_pgd_walk(mm, pgd, xen_unpin_page, USER_LIMIT);
xen_mc_issue(0);
}
alternatives_smp_switch(0);
}
-static void xen_play_dead(void)
+static void __cpuinit xen_play_dead(void) /* used only with CPU_HOTPLUG */
{
play_dead_common();
HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
void xen_mark_init_mm_pinned(void);
-void __init xen_setup_vcpu_info_placement(void);
+void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
/*
* Prep proxy barrier request.
*/
- blkdev_dequeue_request(rq);
+ elv_dequeue_request(q, rq);
q->orig_bar_rq = rq;
rq = &q->bar_rq;
blk_rq_init(q, rq);
* This can happen when the queue switches to
* ORDERED_NONE while this request is on it.
*/
- blkdev_dequeue_request(rq);
+ elv_dequeue_request(q, rq);
if (__blk_end_request(rq, -EOPNOTSUPP,
blk_rq_bytes(rq)))
BUG();
1 << QUEUE_FLAG_STACKABLE);
q->queue_lock = lock;
- blk_queue_segment_boundary(q, 0xffffffff);
+ blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
blk_queue_make_request(q, __make_request);
blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
}
EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
+/**
+ * blkdev_dequeue_request - dequeue request and start timeout timer
+ * @req: request to dequeue
+ *
+ * Dequeue @req and start timeout timer on it. This hands off the
+ * request to the driver.
+ *
+ * Block internal functions which don't want to start timer should
+ * call elv_dequeue_request().
+ */
+void blkdev_dequeue_request(struct request *req)
+{
+ elv_dequeue_request(req->q, req);
+
+ /*
+ * We are now handing the request to the hardware, add the
+ * timeout handler.
+ */
+ blk_add_timer(req);
+}
+EXPORT_SYMBOL(blkdev_dequeue_request);
+
/**
* __end_that_request_first - end I/O on a request
* @req: the request being processed
blk_queue_end_tag(req->q, req);
if (blk_queued_rq(req))
- blkdev_dequeue_request(req);
+ elv_dequeue_request(req->q, req);
if (unlikely(laptop_mode) && blk_fs_request(req))
laptop_io_completion();
*/
bio_get(bio);
bio_endio(bio, 0);
- bio_unmap_user(bio);
+ __blk_rq_unmap_user(bio);
return -EINVAL;
}
q->nr_requests = BLKDEV_MAX_RQ;
blk_queue_max_phys_segments(q, MAX_PHYS_SEGMENTS);
blk_queue_max_hw_segments(q, MAX_HW_SEGMENTS);
+ blk_queue_segment_boundary(q, BLK_SEG_BOUNDARY_MASK);
+ blk_queue_max_segment_size(q, MAX_SEGMENT_SIZE);
+
q->make_request_fn = mfn;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
/* zero is "infinity" */
t->max_sectors = min_not_zero(t->max_sectors, b->max_sectors);
t->max_hw_sectors = min_not_zero(t->max_hw_sectors, b->max_hw_sectors);
+ t->seg_boundary_mask = min_not_zero(t->seg_boundary_mask, b->seg_boundary_mask);
t->max_phys_segments = min(t->max_phys_segments, b->max_phys_segments);
t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
case DVD_WRITE_STRUCT:
case DVD_AUTH:
arg = (unsigned long)compat_ptr(arg);
+ /* These intepret arg as an unsigned long, not as a pointer,
+ * so we must not do compat_ptr() conversion. */
+ case HDIO_SET_MULTCOUNT:
+ case HDIO_SET_UNMASKINTR:
+ case HDIO_SET_KEEPSETTINGS:
+ case HDIO_SET_32BIT:
+ case HDIO_SET_NOWERR:
+ case HDIO_SET_DMA:
+ case HDIO_SET_PIO_MODE:
+ case HDIO_SET_NICE:
+ case HDIO_SET_WCACHE:
+ case HDIO_SET_ACOUSTIC:
+ case HDIO_SET_BUSSTATE:
+ case HDIO_SET_ADDRESS:
+ case CDROMEJECT_SW:
+ case CDROM_SET_OPTIONS:
+ case CDROM_CLEAR_OPTIONS:
+ case CDROM_SELECT_SPEED:
+ case CDROM_SELECT_DISC:
+ case CDROM_MEDIA_CHANGED:
+ case CDROM_DRIVE_STATUS:
+ case CDROM_LOCKDOOR:
+ case CDROM_DEBUG:
break;
default:
/* unknown ioctl number */
struct backing_dev_info *bdi;
loff_t size;
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
switch (cmd) {
case HDIO_GETGEO:
*/
if (blk_account_rq(rq))
q->in_flight++;
-
- /*
- * We are now handing the request to the hardware, add the
- * timeout handler.
- */
- blk_add_timer(rq);
}
-EXPORT_SYMBOL(elv_dequeue_request);
int elv_queue_empty(struct request_queue *q)
{
kfree(disk);
return NULL;
}
+ disk->node_id = node_id;
if (disk_expand_part_tbl(disk, 0)) {
free_part_stats(&disk->part0);
kfree(disk);
device_initialize(disk_to_dev(disk));
INIT_WORK(&disk->async_notify,
media_change_notify_thread);
- disk->node_id = node_id;
}
return disk;
}
rq->timeout = q->sg_timeout;
if (!rq->timeout)
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
+ if (rq->timeout < BLK_MIN_SG_TIMEOUT)
+ rq->timeout = BLK_MIN_SG_TIMEOUT;
return 0;
}
config CRYPTO_ALGAPI
tristate
+ select CRYPTO_ALGAPI2
help
This option provides the API for cryptographic algorithms.
+config CRYPTO_ALGAPI2
+ tristate
+
config CRYPTO_AEAD
tristate
+ select CRYPTO_AEAD2
select CRYPTO_ALGAPI
+config CRYPTO_AEAD2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_BLKCIPHER
tristate
+ select CRYPTO_BLKCIPHER2
select CRYPTO_ALGAPI
- select CRYPTO_RNG
+
+config CRYPTO_BLKCIPHER2
+ tristate
+ select CRYPTO_ALGAPI2
+ select CRYPTO_RNG2
config CRYPTO_HASH
tristate
+ select CRYPTO_HASH2
select CRYPTO_ALGAPI
+config CRYPTO_HASH2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_RNG
tristate
+ select CRYPTO_RNG2
select CRYPTO_ALGAPI
+config CRYPTO_RNG2
+ tristate
+ select CRYPTO_ALGAPI2
+
config CRYPTO_MANAGER
tristate "Cryptographic algorithm manager"
- select CRYPTO_AEAD
- select CRYPTO_HASH
- select CRYPTO_BLKCIPHER
+ select CRYPTO_MANAGER2
help
Create default cryptographic template instantiations such as
cbc(aes).
+config CRYPTO_MANAGER2
+ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
+ select CRYPTO_AEAD2
+ select CRYPTO_HASH2
+ select CRYPTO_BLKCIPHER2
+
config CRYPTO_GF128MUL
tristate "GF(2^128) multiplication functions (EXPERIMENTAL)"
depends on EXPERIMENTAL
crypto_algapi-$(CONFIG_PROC_FS) += proc.o
crypto_algapi-objs := algapi.o scatterwalk.o $(crypto_algapi-y)
-obj-$(CONFIG_CRYPTO_ALGAPI) += crypto_algapi.o
+obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o
-obj-$(CONFIG_CRYPTO_AEAD) += aead.o
+obj-$(CONFIG_CRYPTO_AEAD2) += aead.o
crypto_blkcipher-objs := ablkcipher.o
crypto_blkcipher-objs += blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += crypto_blkcipher.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += chainiv.o
+obj-$(CONFIG_CRYPTO_BLKCIPHER2) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
crypto_hash-objs := hash.o
crypto_hash-objs += ahash.o
-obj-$(CONFIG_CRYPTO_HASH) += crypto_hash.o
+obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
cryptomgr-objs := algboss.o testmgr.o
-obj-$(CONFIG_CRYPTO_MANAGER) += cryptomgr.o
+obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL) += crypto_null.o
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o
-obj-$(CONFIG_CRYPTO_RNG) += rng.o
-obj-$(CONFIG_CRYPTO_RNG) += krng.o
+obj-$(CONFIG_CRYPTO_RNG2) += rng.o
+obj-$(CONFIG_CRYPTO_RNG2) += krng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
int xor_src_cnt;
dma_addr_t dma_dest;
- dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_FROM_DEVICE);
- for (i = 0; i < src_cnt; i++)
+ /* map the dest bidrectional in case it is re-used as a source */
+ dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
+ for (i = 0; i < src_cnt; i++) {
+ /* only map the dest once */
+ if (unlikely(src_list[i] == dest)) {
+ dma_src[i] = dma_dest;
+ continue;
+ }
dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
len, DMA_TO_DEVICE);
+ }
while (src_cnt) {
async_flags = flags;
acpi_dmi_osi_linux(1, d); /* enable */
return 0;
}
-static int __init dmi_disable_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(0, d); /* disable */
- return 0;
-}
-static int __init dmi_unknown_osi_linux(const struct dmi_system_id *d)
-{
- acpi_dmi_osi_linux(-1, d); /* unknown */
- return 0;
-}
static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
{
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
return 0;
}
-/*
- * Most BIOS that invoke OSI(Linux) do nothing with it.
- * But some cause Linux to break.
- * Only a couple use it to make Linux run better.
- *
- * Thus, Linux should continue to disable OSI(Linux) by default,
- * should continue to discourage BIOS writers from using it, and
- * should whitelist the few existing systems that require it.
- *
- * If it appears clear a vendor isn't using OSI(Linux)
- * for anything constructive, blacklist them by name to disable
- * unnecessary dmesg warnings on all of their products.
- */
-
static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
- /*
- * Disable OSI(Linux) warnings on all "Acer, inc."
- *
- * _OSI(Linux) disables the latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5050"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5580"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 3010"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Ferrari 5000"),
- */
- /*
- * note that dmi_check_system() uses strstr()
- * to match sub-strings rather than !strcmp(),
- * so "Acer" below matches "Acer, inc." above.
- */
- /*
- * Disable OSI(Linux) warnings on all "Acer"
- *
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5610"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720Z"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 5520"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 6460"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 7510"),
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Extensa 5220"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Acer",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Apple Computer, Inc."
- * Disable OSI(Linux) warnings on all "Apple Inc."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBook2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3,1"),
- * _OSI(Linux) effect unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacPro2,1"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro1,1"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Apple",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Apple"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "BenQ"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Joybook S31"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "BenQ",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "BenQ"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Clevo Co."
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "M570RU"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Clevo",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "COMPAL"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_BOARD_NAME, "HEL8X"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_BOARD_NAME, "IFL91"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Compal",
- .matches = {
- DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
- },
- },
- { /* OSI(Linux) touches USB, unknown side-effect */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Dimension 5150",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Dell DM051"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell i1501",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1501"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell Latitude D830",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D830"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex GX620",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex GX620"),
- },
- },
- { /* OSI(Linux) causes some USB initialization to not run */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell OptiPlex 755",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 755"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1900",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1900"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE 1950",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PE R200",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R200"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 390"),
- },
- },
- { /* OSI(Linux) touches USB */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR 390",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 690"),
- },
- },
- { /* OSI(Linux) unknown - ASL looks benign, but may effect dock/SMM */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PR M4300",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Precision M4300"),
- },
- },
- { /* OSI(Linux) is a NOP */
- .callback = dmi_disable_osi_linux,
- .ident = "Dell Vostro 1000",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1000"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dell PE SC440",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
- DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge SC440"),
- },
- },
- { /* OSI(Linux) effect unknown */
- .callback = dmi_unknown_osi_linux,
- .ident = "Dialogue Flybook V5",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Dialogue Technology Corporation"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Flybook V5"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "FUJITSU SIEMENS"
- *
- * _OSI(Linux) disables latest Windows BIOS code:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2510"),
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1536"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 1556"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 1546"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo M1425"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Amilo Si 1520"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Fujitsu Siemens",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- },
- },
{
.callback = dmi_disable_osi_vista,
.ident = "Fujitsu Siemens",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile V5505"),
},
},
+
/*
- * Disable OSI(Linux) warnings on all "Hewlett-Packard"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * .ident = "HP Pavilion tx 1000"
- * DMI_MATCH(DMI_BOARD_NAME, "30BF"),
- * .ident = "HP Pavilion dv2000"
- * DMI_MATCH(DMI_BOARD_NAME, "30B5"),
- * .ident = "HP Pavilion dv5000",
- * DMI_MATCH(DMI_BOARD_NAME, "30A7"),
- * .ident = "HP Pavilion dv6300 30BC",
- * DMI_MATCH(DMI_BOARD_NAME, "30BC"),
- * .ident = "HP Pavilion dv6000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B7"),
- * DMI_MATCH(DMI_BOARD_NAME, "30B8"),
- * .ident = "HP Pavilion dv9000",
- * DMI_MATCH(DMI_BOARD_NAME, "30B9"),
- * .ident = "HP Pavilion dv9500",
- * DMI_MATCH(DMI_BOARD_NAME, "30CB"),
- * .ident = "HP/Compaq Presario C500",
- * DMI_MATCH(DMI_BOARD_NAME, "30C6"),
- * .ident = "HP/Compaq Presario F500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D3"),
- * _OSI(Linux) unknown effect:
- * .ident = "HP Pavilion dv6500",
- * DMI_MATCH(DMI_BOARD_NAME, "30D0"),
+ * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
+ * Linux ignores it, except for the machines enumerated below.
*/
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Hewlett-Packard",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
- },
- },
+
/*
* Lenovo has a mix of systems OSI(Linux) situations
* and thus we can not wildcard the vendor.
DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"),
},
},
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 V100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "LENOVO3000 V100"),
- },
- },
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Lenovo 3000 N100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
- DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "LG Electronics"
- *
- * _OSI(Linux) confirmed to be a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "P1-J150B"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- *
- * unknown:
- * DMI_MATCH(DMI_PRODUCT_NAME, "S1-MDGDG"),
- * with DMI_MATCH(DMI_BOARD_NAME, "ROCKY"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "LG",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"),
- },
- },
- /* NEC - OSI(Linux) effect unknown */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "NEC VERSA M360",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "NEC Computers SAS"),
- DMI_MATCH(DMI_PRODUCT_NAME, "NEC VERSA M360"),
- },
- },
- /* Panasonic */
- {
- .callback = dmi_unknown_osi_linux,
- .ident = "Panasonic",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
- /* Toughbook CF-52 */
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-52CCABVBG"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Samsung Electronics"
- *
- * OSI(Linux) disables PNP0C32 and other BIOS code for Windows:
- * DMI_MATCH(DMI_PRODUCT_NAME, "R40P/R41P"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "R59P/R60P/R61P"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Samsung",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "Sony Corporation"
- *
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NR11S_S"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ38GP_C"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SZ650N"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-TZ21MN_N"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ11M"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Sony",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
- },
- },
- /*
- * Disable OSI(Linux) warnings on all "TOSHIBA"
- *
- * _OSI(Linux) breaks sound (bugzilla 7787):
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P105"),
- * _OSI(Linux) is a NOP:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A100"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A210"),
- * _OSI(Linux) unknown effect:
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A135"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A200"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P205"),
- * DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U305"),
- */
- {
- .callback = dmi_disable_osi_linux,
- .ident = "Toshiba",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- },
- },
{}
};
if (acpi_disabled)
return;
- /*
- * ACPI CA initializes acpi_dbg_level to non-zero, which means
- * we get debug output merely by turning on CONFIG_ACPI_DEBUG.
- * Turn it off so we don't get output unless the user specifies
- * acpi.debug_level.
- */
- acpi_dbg_level = 0;
-
printk(KERN_INFO PREFIX "Core revision %08x\n", ACPI_CA_VERSION);
/* enable workarounds, unless strict ACPI spec. compliance */
goto unlock;
err:
/* false interrupt, state didn't change */
- ++ec->curr->irq_count;
+ if (in_interrupt())
+ ++ec->curr->irq_count;
unlock:
spin_unlock_irqrestore(&ec->curr_lock, flags);
}
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
-#include <linux/dmi.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
- * "Ode to _OSI(Linux)"
+ * The story of _OSI(Linux)
*
- * osi_linux -- Control response to BIOS _OSI(Linux) query.
+ * From pre-history through Linux-2.6.22,
+ * Linux responded TRUE upon a BIOS OSI(Linux) query.
*
- * As Linux evolves, the features that it supports change.
- * So an OSI string such as "Linux" is not specific enough
- * to be useful across multiple versions of Linux. It
- * doesn't identify any particular feature, interface,
- * or even any particular version of Linux...
+ * Unfortunately, reference BIOS writers got wind of this
+ * and put OSI(Linux) in their example code, quickly exposing
+ * this string as ill-conceived and opening the door to
+ * an un-bounded number of BIOS incompatibilities.
*
- * Unfortunately, Linux-2.6.22 and earlier responded "yes"
- * to a BIOS _OSI(Linux) query. When
- * a reference mobile BIOS started using it, its use
- * started to spread to many vendor platforms.
- * As it is not supportable, we need to halt that spread.
+ * For example, OSI(Linux) was used on resume to re-POST a
+ * video card on one system, because Linux at that time
+ * could not do a speedy restore in its native driver.
+ * But then upon gaining quick native restore capability,
+ * Linux has no way to tell the BIOS to skip the time-consuming
+ * POST -- putting Linux at a permanent performance disadvantage.
+ * On another system, the BIOS writer used OSI(Linux)
+ * to infer native OS support for IPMI! On other systems,
+ * OSI(Linux) simply got in the way of Linux claiming to
+ * be compatible with other operating systems, exposing
+ * BIOS issues such as skipped device initialization.
*
- * Today, most BIOS references to _OSI(Linux) are noise --
- * they have no functional effect and are just dead code
- * carried over from the reference BIOS.
- *
- * The next most common case is that _OSI(Linux) harms Linux,
- * usually by causing the BIOS to follow paths that are
- * not tested during Windows validation.
- *
- * Finally, there is a short list of platforms
- * where OSI(Linux) benefits Linux.
- *
- * In Linux-2.6.23, OSI(Linux) is first disabled by default.
- * DMI is used to disable the dmesg warning about OSI(Linux)
- * on platforms where it is known to have no effect.
- * But a dmesg warning remains for systems where
- * we do not know if OSI(Linux) is good or bad for the system.
- * DMI is also used to enable OSI(Linux) for the machines
- * that are known to need it.
+ * So "Linux" turned out to be a really poor chose of
+ * OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
- * It will be ignored by default, and to get Linux to
- * not ignore it will require a kernel source update to
- * add a DMI entry, or a boot-time "acpi_osi=Linux" invocation.
+ * Linux will complain on the console when it sees it, and return FALSE.
+ * To get Linux to return TRUE for your system will require
+ * a kernel source update to add a DMI entry,
+ * or boot with "acpi_osi=Linux"
*/
-#define OSI_LINUX_ENABLE 0
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
-} osi_linux = { OSI_LINUX_ENABLE, 0, 0, 0};
+} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
return (AE_OK);
}
-/**
- * acpi_dmi_dump - dump DMI slots needed for blacklist entry
- *
- * Returns 0 on success
- */
-static int acpi_dmi_dump(void)
-{
-
- if (!dmi_available)
- return -1;
-
- printk(KERN_NOTICE PREFIX "DMI System Vendor: %s\n",
- dmi_get_system_info(DMI_SYS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI Product Name: %s\n",
- dmi_get_system_info(DMI_PRODUCT_NAME));
- printk(KERN_NOTICE PREFIX "DMI Product Version: %s\n",
- dmi_get_system_info(DMI_PRODUCT_VERSION));
- printk(KERN_NOTICE PREFIX "DMI Board Name: %s\n",
- dmi_get_system_info(DMI_BOARD_NAME));
- printk(KERN_NOTICE PREFIX "DMI BIOS Vendor: %s\n",
- dmi_get_system_info(DMI_BIOS_VENDOR));
- printk(KERN_NOTICE PREFIX "DMI BIOS Date: %s\n",
- dmi_get_system_info(DMI_BIOS_DATE));
-
- return 0;
-}
-
-
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
- if (!osi_linux.dmi) {
- if (acpi_dmi_dump())
- printk(KERN_NOTICE PREFIX
- "[please extract dmidecode output]\n");
- printk(KERN_NOTICE PREFIX
- "Please send DMI info above to "
- "linux-acpi@vger.kernel.org\n");
- }
- if (!osi_linux.known && !osi_linux.cmdline) {
- printk(KERN_NOTICE PREFIX
- "If \"acpi_osi=%sLinux\" works better, "
- "please notify linux-acpi@vger.kernel.org\n",
- osi_linux.enable ? "!" : "");
- }
-
if (osi_linux.enable)
return AE_OK;
}
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
- /*
- * Don't set Power button GPE as run_wake
- * if Fixed Power button is used
- */
- if (!strcmp(device->pnp.hardware_id, "PNP0C0C") &&
- !(acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON)) {
- device->wakeup.flags.run_wake = 0;
- device->wakeup.flags.valid = 0;
- }
-
end:
if (ACPI_FAILURE(status))
device->flags.wake_capable = 0;
old_suspend_ordering = true;
}
+/*
+ * According to the ACPI specification the BIOS should make sure that ACPI is
+ * enabled and SCI_EN bit is set on wake-up from S1 - S3 sleep states. Still,
+ * some BIOSes don't do that and therefore we use acpi_enable() to enable ACPI
+ * on such systems during resume. Unfortunately that doesn't help in
+ * particularly pathological cases in which SCI_EN has to be set directly on
+ * resume, although the specification states very clearly that this flag is
+ * owned by the hardware. The set_sci_en_on_resume variable will be set in such
+ * cases.
+ */
+static bool set_sci_en_on_resume;
+
/**
* acpi_pm_disable_gpes - Disable the GPEs.
*/
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
- acpi_enable();
+ if (set_sci_en_on_resume)
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
+ else
+ acpi_enable();
+
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
return 0;
}
+static int __init init_set_sci_en_on_resume(const struct dmi_system_id *d)
+{
+ set_sci_en_on_resume = true;
+ return 0;
+}
+
static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
{
.callback = init_old_suspend_ordering,
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacBook 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook1,1"),
+ },
+ },
+ {
+ .callback = init_set_sci_en_on_resume,
+ .ident = "Apple MacMini 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
toshiba_acpi_exit();
return -ENOMEM;
}
- }
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
-
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR "unable to register kill-switch input device\n");
- rfkill_free(toshiba_acpi.rfk_dev);
- toshiba_acpi.rfk_dev = NULL;
- toshiba_acpi_exit();
- return ret;
+ /* Register input device for kill switch */
+ toshiba_acpi.poll_dev = input_allocate_polled_device();
+ if (!toshiba_acpi.poll_dev) {
+ printk(MY_ERR
+ "unable to allocate kill-switch input device\n");
+ toshiba_acpi_exit();
+ return -ENOMEM;
+ }
+ toshiba_acpi.poll_dev->private = &toshiba_acpi;
+ toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+ toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+ toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+ toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+ /* Toshiba USB ID */
+ toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
+ set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+ set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+ input_report_switch(toshiba_acpi.poll_dev->input,
+ SW_RFKILL_ALL, TRUE);
+ input_sync(toshiba_acpi.poll_dev->input);
+
+ ret = input_register_polled_device(toshiba_acpi.poll_dev);
+ if (ret) {
+ printk(MY_ERR
+ "unable to register kill-switch input device\n");
+ toshiba_acpi_exit();
+ return ret;
+ }
}
return 0;
/* Debug switch - layer (component) mask */
-u32 acpi_dbg_layer = ACPI_COMPONENT_DEFAULT | ACPI_ALL_DRIVERS;
+u32 acpi_dbg_layer = 0;
u32 acpi_gbl_nesting_level = 0;
/* Debugger globals */
struct acpi_object_list *arguments, unsigned long long *data)
{
acpi_status status = AE_OK;
- union acpi_object *element;
+ union acpi_object element;
struct acpi_buffer buffer = { 0, NULL };
-
if (!data)
return AE_BAD_PARAMETER;
- element = kzalloc(sizeof(union acpi_object), irqs_disabled() ? GFP_ATOMIC: GFP_KERNEL);
- if (!element)
- return AE_NO_MEMORY;
-
buffer.length = sizeof(union acpi_object);
- buffer.pointer = element;
+ buffer.pointer = &element;
status = acpi_evaluate_object(handle, pathname, arguments, &buffer);
if (ACPI_FAILURE(status)) {
acpi_util_eval_error(handle, pathname, status);
- kfree(element);
return status;
}
- if (element->type != ACPI_TYPE_INTEGER) {
+ if (element.type != ACPI_TYPE_INTEGER) {
acpi_util_eval_error(handle, pathname, AE_BAD_DATA);
- kfree(element);
return AE_BAD_DATA;
}
- *data = element->integer.value;
- kfree(element);
+ *data = element.integer.value;
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Return value [%llu]\n", *data));
If unsure, say N.
config SATA_SX4
- tristate "Promise SATA SX4 support"
+ tristate "Promise SATA SX4 support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for Promise Serial ATA SX4.
otherwise unsupported hardware.
config PATA_ALI
- tristate "ALi PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "ALi PATA support"
+ depends on PCI
help
This option enables support for the ALi ATA interfaces
found on the many ALi chipsets.
If unsure, say N.
config PATA_CMD640_PCI
- tristate "CMD640 PCI PATA support (Very Experimental)"
+ tristate "CMD640 PCI PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the CMD640 PCI IDE
If unsure, say N.
config PATA_CS5530
- tristate "CS5530 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "CS5530 PATA support"
+ depends on PCI
help
This option enables support for the Cyrix/NatSemi/AMD CS5530
companion chip used with the MediaGX/Geode processor family.
If unsure, say N.
config PATA_CS5536
- tristate "CS5536 PATA support (Experimental)"
- depends on PCI && X86 && !X86_64 && EXPERIMENTAL
+ tristate "CS5536 PATA support"
+ depends on PCI && X86 && !X86_64
help
This option enables support for the AMD CS5536
companion chip used with the Geode LX processor family.
If unsure, say N.
config PATA_HPT3X2N
- tristate "HPT 372N/302N PATA support (Very Experimental)"
+ tristate "HPT 372N/302N PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the N variant HPT PATA
problems with DMA on this chipset.
config PATA_ISAPNP
- tristate "ISA Plug and Play PATA support (Experimental)"
- depends on EXPERIMENTAL && ISAPNP
+ tristate "ISA Plug and Play PATA support"
+ depends on ISAPNP
help
This option enables support for ISA plug & play ATA
controllers such as those found on old soundcards.
If unsure, say N.
config PATA_NS87410
- tristate "Nat Semi NS87410 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Nat Semi NS87410 PATA support"
+ depends on PCI
help
This option enables support for the National Semiconductor
NS87410 PCI-IDE controller.
If unsure, say N.
config PATA_NS87415
- tristate "Nat Semi NS87415 PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Nat Semi NS87415 PATA support"
+ depends on PCI
help
This option enables support for the National Semiconductor
NS87415 PCI-IDE controller.
If unsure, say N.
config PATA_PDC_OLD
- tristate "Older Promise PATA controller support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "Older Promise PATA controller support"
+ depends on PCI
help
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
config PATA_RADISYS
- tristate "RADISYS 82600 PATA support (Very Experimental)"
+ tristate "RADISYS 82600 PATA support (Experimental)"
depends on PCI && EXPERIMENTAL
help
This option enables support for the RADISYS 82600
If unsure, say N.
config PATA_SC1200
- tristate "SC1200 PATA support (Very Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "SC1200 PATA support"
+ depends on PCI
help
This option enables support for the NatSemi/AMD SC1200 SoC
companion chip used with the Geode processor family.
If unsure, say N.
config PATA_SIS
- tristate "SiS PATA support (Experimental)"
- depends on PCI && EXPERIMENTAL
+ tristate "SiS PATA support"
+ depends on PCI
help
This option enables support for SiS PATA controllers
if (dmi_find_device(DMI_DEV_TYPE_OEM_STRING, oemstrs[i], NULL))
return 1;
+ /* TECRA M4 sometimes forgets its identify and reports bogus
+ * DMI information. As the bogus information is a bit
+ * generic, match as many entries as possible. This manual
+ * matching is necessary because dmi_system_id.matches is
+ * limited to four entries.
+ */
+ if (dmi_get_system_info(DMI_SYS_VENDOR) &&
+ dmi_get_system_info(DMI_PRODUCT_NAME) &&
+ dmi_get_system_info(DMI_PRODUCT_VERSION) &&
+ dmi_get_system_info(DMI_PRODUCT_SERIAL) &&
+ dmi_get_system_info(DMI_BOARD_VENDOR) &&
+ dmi_get_system_info(DMI_BOARD_NAME) &&
+ dmi_get_system_info(DMI_BOARD_VERSION) &&
+ !strcmp(dmi_get_system_info(DMI_SYS_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_NAME), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_VERSION), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_PRODUCT_SERIAL), "000000") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VENDOR), "TOSHIBA") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_NAME), "Portable PC") &&
+ !strcmp(dmi_get_system_info(DMI_BOARD_VERSION), "Version A0"))
+ return 1;
+
return 0;
}
}
}
+ if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
+ ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
+ "firmware update to be fully functional.\n");
+ ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
+ "or visit http://ata.wiki.kernel.org.\n");
+ }
+
return 0;
err_out_nosup:
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
+ /* Seagate NCQ + FLUSH CACHE firmware bug */
+ { "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
+ { "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+ { "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
+ ATA_HORKAGE_FIRMWARE_WARN },
+
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
mask &= ~(0xF0 << ATA_SHIFT_UDMA);
- }
+ } else if (adev->class == ATA_DEV_ATAPI)
+ mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+
return ata_bmdma_mode_filter(adev, mask);
}
static int hpt36x_cable_detect(struct ata_port *ap)
{
- u8 ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u8 ata66;
+ /*
+ * Each channel of pata_hpt366 occupies separate PCI function
+ * as the primary channel and bit1 indicates the cable type.
+ */
pci_read_config_byte(pdev, 0x5A, &ata66);
- if (ata66 & (1 << ap->port_no))
+ if (ata66 & 2)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
}
/* PCI clocking determines the ATA timing values to use */
/* info_hpt366 is safe against re-entry so we can scribble on it */
switch((reg1 & 0x700) >> 8) {
- case 5:
+ case 9:
hpriv = &hpt366_40;
break;
- case 9:
+ case 5:
hpriv = &hpt366_25;
break;
default:
#include <linux/libata.h>
#define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.1"
+#define DRV_VERSION "0.1.3"
/**
return rc;
pci_set_master(dev);
- /* Set up the register mappings */
+ /* Set up the register mappings. We use the I/O mapping as only the
+ older chips also have MMIO on BAR 1 */
base = host->iomap[0];
if (!base)
return -ENOMEM;
#endif
static const struct pci_device_id ninja32[] = {
+ { 0x10FC, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0x8008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0xf008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0x1145, 0xf02C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ },
};
#define RB500_CF_MAXPORTS 1
#define RB500_CF_IO_DELAY 400
-#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_BASE 0x0800
+#define RB500_CF_REG_ERR 0x080D
#define RB500_CF_REG_CTRL 0x080E
-#define RB500_CF_REG_DATA 0x0C00
+/* 32bit buffered data register offset */
+#define RB500_CF_REG_DBUF32 0x0C00
struct rb532_cf_info {
void __iomem *iobase;
rb532_pata_finish_io(ap);
}
-static void rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
unsigned int buflen, int write_data)
{
struct ata_port *ap = adev->link->ap;
void __iomem *ioaddr = ap->ioaddr.data_addr;
+ int retlen = buflen;
if (write_data) {
for (; buflen > 0; buflen--, buf++)
}
rb532_pata_finish_io(adev->link->ap);
+ return retlen;
}
static void rb532_pata_freeze(struct ata_port *ap)
ap->pio_mask = 0x1f; /* PIO4 */
ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
- ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_BASE;
ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
ata_sff_std_ports(&ap->ioaddr);
- ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DBUF32;
+ ap->ioaddr.error_addr = info->iobase + RB500_CF_REG_ERR;
}
static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
{ 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
- { 0x5513, 0x1039, 0x5513 }, /* Targa Visionary 1000 */
/* end marker */
{ 0, }
};
/* XXX DEV_LABEL is a guess */
if (!request_region(iobase, HRZ_IO_EXTENT, DEV_LABEL)) {
- return -EINVAL;
+ err = -EINVAL;
goto out_disable;
}
for (i = 0; i <= h->highest_lun; i++) {
int j;
drv_found = 0;
+
+ /* skip holes in the array from already deleted drives */
+ if (h->drv[i].raid_level == -1)
+ continue;
+
for (j = 0; j < num_luns; j++) {
memcpy(&lunid, &ld_buff->LUN[j][0], 4);
lunid = le32_to_cpu(lunid);
static void pkt_sysfs_dev_new(struct pktcdvd_device *pd)
{
if (class_pktcdvd) {
- pd->dev = device_create(class_pktcdvd, NULL, pd->pkt_dev, NULL,
+ pd->dev = device_create(class_pktcdvd, NULL, MKDEV(0, 0), NULL,
"%s", pd->name);
if (IS_ERR(pd->dev))
pd->dev = NULL;
return 0;
out_mem:
- blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(bdev, FMODE_READ | FMODE_NDELAY);
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
return ret;
pkt_debugfs_dev_remove(pd);
pkt_sysfs_dev_remove(pd);
- blkdev_put(pd->bdev, FMODE_READ|FMODE_WRITE);
+ blkdev_put(pd->bdev, FMODE_READ | FMODE_NDELAY);
remove_proc_entry(pd->name, pkt_proc);
DPRINTK(DRIVER_NAME": writer %s unmapped\n", pd->name);
int in_irq;
/* Details of hardware device */
- unsigned long physaddr;
+ resource_size_t physaddr;
void __iomem *baseaddr;
int irq;
int bus_width; /* 0 := 8 bit; 1 := 16 bit */
/* Okay, it's a data request, set it up for transfer */
dev_dbg(ace->dev,
- "request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
- req->sector, req->hard_nr_sectors,
+ "request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+ (unsigned long long) req->sector, req->hard_nr_sectors,
req->current_nr_sectors, rq_data_dir(req));
ace->req = req;
int rc;
dev_dbg(ace->dev, "ace_setup(ace=0x%p)\n", ace);
- dev_dbg(ace->dev, "physaddr=0x%lx irq=%i\n", ace->physaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr=0x%llx irq=%i\n",
+ (unsigned long long)ace->physaddr, ace->irq);
spin_lock_init(&ace->lock);
init_completion(&ace->id_completion);
/* Print the identification */
dev_info(ace->dev, "Xilinx SystemACE revision %i.%i.%i\n",
(version >> 12) & 0xf, (version >> 8) & 0x0f, version & 0xff);
- dev_dbg(ace->dev, "physaddr 0x%lx, mapped to 0x%p, irq=%i\n",
- ace->physaddr, ace->baseaddr, ace->irq);
+ dev_dbg(ace->dev, "physaddr 0x%llx, mapped to 0x%p, irq=%i\n",
+ (unsigned long long) ace->physaddr, ace->baseaddr, ace->irq);
ace->media_change = 1;
ace_revalidate_disk(ace->gd);
err_blk_initq:
iounmap(ace->baseaddr);
err_ioremap:
- dev_info(ace->dev, "xsysace: error initializing device at 0x%lx\n",
- ace->physaddr);
+ dev_info(ace->dev, "xsysace: error initializing device at 0x%llx\n",
+ (unsigned long long) ace->physaddr);
return -ENOMEM;
}
}
static int __devinit
-ace_alloc(struct device *dev, int id, unsigned long physaddr,
+ace_alloc(struct device *dev, int id, resource_size_t physaddr,
int irq, int bus_width)
{
struct ace_device *ace;
static int __devinit ace_probe(struct platform_device *dev)
{
- unsigned long physaddr = 0;
+ resource_size_t physaddr = 0;
int bus_width = ACE_BUS_WIDTH_16; /* FIXME: should not be hard coded */
int id = dev->id;
int irq = NO_IRQ;
ace_of_probe(struct of_device *op, const struct of_device_id *match)
{
struct resource res;
- unsigned long physaddr;
+ resource_size_t physaddr;
const u32 *id;
int irq, bus_width, rc;
if (!q)
return -ENXIO;
- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
cdi->last_sense = 0;
while (nframes) {
len = nr * CD_FRAMESIZE_RAW;
+ rq = blk_get_request(q, READ, GFP_KERNEL);
+ if (!rq) {
+ ret = -ENOMEM;
+ break;
+ }
+
ret = blk_rq_map_user(q, rq, NULL, ubuf, len, GFP_KERNEL);
- if (ret)
+ if (ret) {
+ blk_put_request(rq);
break;
+ }
rq->cmd[0] = GPCMD_READ_CD;
rq->cmd[1] = 1 << 2;
if (blk_rq_unmap_user(bio))
ret = -EFAULT;
+ blk_put_request(rq);
if (ret)
break;
ubuf += len;
}
- blk_put_request(rq);
return ret;
}
static int uninorth_rev;
static int is_u3;
-static char __devinitdata *aperture = NULL;
+static char *aperture = NULL;
static int uninorth_fetch_size(void)
{
0x0c U+2640
0x0d U+266a
0x0e U+266b
-0x0f U+263c
+0x0f U+263c U+00a4
0x10 U+25b6 U+25ba
0x11 U+25c0 U+25c4
0x12 U+2195
0x24 U+0024
0x25 U+0025
0x26 U+0026
-0x27 U+0027
+0x27 U+0027 U+00b4
0x28 U+0028
0x29 U+0029
0x2a U+002a
0x41 U+0041 U+00c0 U+00c1 U+00c2 U+00c3
0x42 U+0042
0x43 U+0043 U+00a9
-0x44 U+0044
+0x44 U+0044 U+00d0
0x45 U+0045 U+00c8 U+00ca U+00cb
0x46 U+0046
0x47 U+0047
0x79 U+0079 U+00fd
0x7a U+007a
0x7b U+007b
-0x7c U+007c U+00a5
+0x7c U+007c U+00a6
0x7d U+007d
0x7e U+007e
#
0xe8 U+03a6 U+00d8
0xe9 U+0398
0xea U+03a9 U+2126
-0xeb U+03b4
+0xeb U+03b4 U+00f0
0xec U+221e
0xed U+03c6 U+00f8
-0xee U+03b5
+0xee U+03b5 U+2208
0xef U+2229
0xf0 U+2261
0xf1 U+00b1
* do is go probing around in the usual places hoping we can find it.
*/
-static int stli_findeisabrds(void)
+static int __init stli_findeisabrds(void)
{
struct stlibrd *brdp;
unsigned int iobase, eid, i;
* can find.
*/
-static int stli_initbrds(void)
+static int __init stli_initbrds(void)
{
struct stlibrd *brdp, *nxtbrdp;
struct stlconf conf;
TTY_OVERRUN);
/*
If the flip buffer itself is
- overflowing, we still loose
+ overflowing, we still lose
the next incoming character.
*/
if (tty_buffer_request_room(tty, 1) !=
}
#endif
if (device == MKDEV(TTYAUX_MAJOR, 1)) {
- driver = tty_driver_kref_get(console_device(&index));
- if (driver) {
- /* Don't let /dev/console block */
- filp->f_flags |= O_NONBLOCK;
- noctty = 1;
- goto got_driver;
+ struct tty_driver *console_driver = console_device(&index);
+ if (console_driver) {
+ driver = tty_driver_kref_get(console_driver);
+ if (driver) {
+ /* Don't let /dev/console block */
+ filp->f_flags |= O_NONBLOCK;
+ noctty = 1;
+ goto got_driver;
+ }
}
mutex_unlock(&tty_mutex);
return -ENODEV;
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2008 Xilinx Inc.
* All rights reserved.
*
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2007-2008 Xilinx Inc.
* All rights reserved.
*
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2002 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2004 Xilinx Inc., Systems Engineering Group
* (c) Copyright 2007-2008 Xilinx Inc.
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
dev_err(dev, "Couldn't lock memory region at %Lx\n",
- regs_res->start);
+ (unsigned long long) regs_res->start);
retval = -EBUSY;
goto failed1;
}
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %Lx\n",
- (unsigned long int)drvdata->mem_start,
- drvdata->base_address, drvdata->mem_size);
+ dev_info(dev, "ioremap %llx to %p with size %llx\n",
+ (unsigned long long) drvdata->mem_start,
+ drvdata->base_address,
+ (unsigned long long) drvdata->mem_size);
cdev_init(&drvdata->cdev, &hwicap_fops);
drvdata->cdev.owner = THIS_MODULE;
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE.
*
- * Xilinx products are not intended for use in life support appliances,
- * devices, or systems. Use in such applications is expressly prohibited.
- *
* (c) Copyright 2003-2007 Xilinx Inc.
* All rights reserved.
*
return ret;
}
-static int __devexit talitos_remove(struct of_device *ofdev)
+static int talitos_remove(struct of_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct talitos_private *priv = dev_get_drvdata(dev);
.name = "talitos",
.match_table = talitos_match,
.probe = talitos_probe,
- .remove = __devexit_p(talitos_remove),
+ .remove = talitos_remove,
};
static int __init talitos_init(void)
init_completion(&device->done);
kref_init(&device->refcount);
+
+ mutex_lock(&dma_list_mutex);
device->dev_id = id++;
+ mutex_unlock(&dma_list_mutex);
/* represent channels in sysfs. Probably want devs too */
list_for_each_entry(chan, &device->channels, device_node) {
*/
#define IOAT_TEST_SIZE 2000
+DECLARE_COMPLETION(test_completion);
static void ioat_dma_test_callback(void *dma_async_param)
{
printk(KERN_ERR "ioatdma: ioat_dma_test_callback(%p)\n",
dma_async_param);
+ complete(&test_completion);
}
/**
goto free_resources;
}
device->common.device_issue_pending(dma_chan);
- msleep(1);
+
+ wait_for_completion_timeout(&test_completion, msecs_to_jiffies(3000));
if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
!= DMA_SUCCESS) {
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
+ dma_addr_t dest;
+ src_cnt = unmap->unmap_src_cnt;
+ dest = iop_desc_get_dest_addr(unmap, iop_chan);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- addr = iop_desc_get_dest_addr(unmap, iop_chan);
- dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+
+ dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = iop_desc_get_src_addr(unmap,
iop_chan,
src_cnt);
+ if (addr == dest)
+ continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}
enum dma_ctrl_flags flags = desc->async_tx.flags;
u32 src_cnt;
dma_addr_t addr;
+ dma_addr_t dest;
+ src_cnt = unmap->unmap_src_cnt;
+ dest = mv_desc_get_dest_addr(unmap);
if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- addr = mv_desc_get_dest_addr(unmap);
- dma_unmap_page(dev, addr, len, DMA_FROM_DEVICE);
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor ? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+ dma_unmap_page(dev, dest, len, dir);
}
if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- src_cnt = unmap->unmap_src_cnt;
while (src_cnt--) {
addr = mv_desc_get_src_addr(unmap,
src_cnt);
+ if (addr == dest)
+ continue;
dma_unmap_page(dev, addr, len,
DMA_TO_DEVICE);
}
mutex_lock(&device_ctls_mutex);
+ /* If we are being removed, bail out immediately */
+ if (edac_dev->op_state == OP_OFFLINE) {
+ mutex_unlock(&device_ctls_mutex);
+ return;
+ }
+
/* Only poll controllers that are running polled and have a check */
if ((edac_dev->op_state == OP_RUNNING_POLL) &&
(edac_dev->edac_check != NULL)) {
/* mark this instance as OFFLINE */
edac_dev->op_state = OP_OFFLINE;
- /* clear workq processing on this instance */
- edac_device_workq_teardown(edac_dev);
-
/* deregister from global list */
del_edac_device_from_global_list(edac_dev);
mutex_unlock(&device_ctls_mutex);
+ /* clear workq processing on this instance */
+ edac_device_workq_teardown(edac_dev);
+
/* Tear down the sysfs entries for this instance */
edac_device_remove_sysfs(edac_dev);
* already registered driver
*/
-static int i82875p_registered = 1;
-
static struct edac_pci_ctl_info *i82875p_pci;
static void i82875p_get_error_info(struct mem_ctl_info *mci,
"%s(): pci_bus_add_device() Failed\n",
__func__);
}
+ pci_bus_assign_resources(dev->bus);
}
*ovrfl_pdev = dev;
goto fail0;
}
+ /* Keeps mci available after edac_mc_del_mc() till edac_mc_free() */
+ kobject_get(&mci->edac_mci_kobj);
+
debugf3("%s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR;
return 0;
fail1:
+ kobject_put(&mci->edac_mci_kobj);
edac_mc_free(mci);
fail0:
{
debugf3("%s()\n", __func__);
+ i82875p_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+
pci_unregister_driver(&i82875p_driver);
- if (!i82875p_registered) {
- i82875p_remove_one(mci_pdev);
- pci_dev_put(mci_pdev);
- }
}
module_init(i82875p_init);
packet->ack = RCODE_SEND_ERROR;
return -1;
}
+ packet->payload_bus = payload_bus;
d[2].req_count = cpu_to_le16(packet->payload_length);
d[2].data_address = cpu_to_le32(payload_bus);
struct driver_data *driver_data;
struct fw_packet *packet;
struct fw_ohci *ohci = context->ohci;
- dma_addr_t payload_bus;
int evt;
if (last->transfer_status == 0)
/* This packet was cancelled, just continue. */
return 1;
- payload_bus = le32_to_cpu(last->data_address);
- if (payload_bus != 0)
- dma_unmap_single(ohci->card.device, payload_bus,
+ if (packet->payload_bus)
+ dma_unmap_single(ohci->card.device, packet->payload_bus,
packet->payload_length, DMA_TO_DEVICE);
evt = le16_to_cpu(last->transfer_status) & 0x1f;
if (packet->ack != 0)
goto out;
+ if (packet->payload_bus)
+ dma_unmap_single(ohci->card.device, packet->payload_bus,
+ packet->payload_length, DMA_TO_DEVICE);
+
log_ar_at_event('T', packet->speed, packet->header, 0x20);
driver_data->packet = NULL;
packet->ack = RCODE_CANCELLED;
.model = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model = 0x000023,
packet->speed = speed;
packet->generation = generation;
packet->ack = 0;
+ packet->payload_bus = 0;
}
/**
BUG();
return;
}
+
+ response->payload_bus = 0;
}
EXPORT_SYMBOL(fw_fill_response);
#include <linux/list.h>
#include <linux/spinlock_types.h>
#include <linux/timer.h>
+#include <linux/types.h>
#include <linux/workqueue.h>
#define TCODE_IS_READ_REQUEST(tcode) (((tcode) & ~1) == 4)
size_t header_length;
void *payload;
size_t payload_length;
+ dma_addr_t payload_bus;
u32 timestamp;
/*
return;
}
+ drm_vblank_cleanup(dev);
+
drm_lastclose(dev);
if (drm_core_has_MTRR(dev) && drm_core_has_AGP(dev) &&
}
}
-static void drm_vblank_cleanup(struct drm_device *dev)
+void drm_vblank_cleanup(struct drm_device *dev)
{
/* Bail if the driver didn't call drm_vblank_init() */
if (dev->num_crtcs == 0)
free_irq(dev->pdev->irq, dev);
- drm_vblank_cleanup(dev);
-
return 0;
}
EXPORT_SYMBOL(drm_irq_uninstall);
value = dev->pci_device;
break;
case I915_PARAM_HAS_GEM:
- value = 1;
+ value = dev_priv->has_gem;
break;
default:
DRM_ERROR("Unknown parameter %d\n", param->param);
dev_priv->regs = ioremap(base, size);
+#ifdef CONFIG_HIGHMEM64G
+ /* don't enable GEM on PAE - needs agp + set_memory_* interface fixes */
+ dev_priv->has_gem = 0;
+#else
+ /* enable GEM by default */
+ dev_priv->has_gem = 1;
+#endif
+
i915_gem_load(dev);
/* Init HWS */
* and the registers being closely associated.
*
* According to chipset errata, on the 965GM, MSI interrupts may
- * be lost or delayed
+ * be lost or delayed, but we use them anyways to avoid
+ * stuck interrupts on some machines.
*/
- if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev))
+ if (!IS_I945G(dev) && !IS_I945GM(dev))
pci_enable_msi(dev->pdev);
intel_opregion_init(dev);
spin_lock_init(&dev_priv->user_irq_lock);
+ ret = drm_vblank_init(dev, I915_NUM_PIPE);
+
+ if (ret) {
+ (void) i915_driver_unload(dev);
+ return ret;
+ }
+
return ret;
}
PIPE_B,
};
+#define I915_NUM_PIPE 2
+
/* Interface history:
*
* 1.1: Original.
typedef struct drm_i915_private {
struct drm_device *dev;
+ int has_gem;
+
void __iomem *regs;
drm_local_map_t *sarea;
int user_irq_refcount;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
+ u32 pipestat[2];
int tex_lru_log_granularity;
int allow_batchbuffer;
u32 saveDSPBCNTR;
u32 saveDSPARB;
u32 saveRENDERSTANDBY;
+ u32 saveHWS;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
* List of objects currently involved in rendering from the
* ringbuffer.
*
+ * Includes buffers having the contents of their GPU caches
+ * flushed, not necessarily primitives. last_rendering_seqno
+ * represents when the rendering involved will be completed.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head active_list;
* still have a write_domain which needs to be flushed before
* unbinding.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is held on the buffer while on this list.
*/
struct list_head flushing_list;
* LRU list of objects which are not in the ringbuffer and
* are ready to unbind, but are still in the GTT.
*
+ * last_rendering_seqno is 0 while an object is in this list.
+ *
* A reference is not held on the buffer while on this list,
* as merely being GTT-bound shouldn't prevent its being
* freed, and we'll pull it off the list in the free path.
uint32_t agp_type;
/**
- * Flagging of which individual pages are valid in GEM_DOMAIN_CPU when
- * GEM_DOMAIN_CPU is not in the object's read domain.
+ * If present, while GEM_DOMAIN_CPU is in the read domain this array
+ * flags which individual pages are valid.
*/
uint8_t *page_cpu_valid;
};
/** Time at which this request was emitted, in jiffies. */
unsigned long emitted_jiffies;
- /** Cache domains that were flushed at the start of the request. */
- uint32_t flush_domains;
-
struct list_head list;
};
struct drm_file *file_priv);
extern void i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask);
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask);
+
+
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
struct drm_file *file_priv);
#include "i915_drv.h"
#include <linux/swap.h>
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain);
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain);
+#define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain);
+static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
+static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
+static int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
+ int write);
+static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset,
+ uint64_t size);
+static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
static int i915_gem_object_get_page_list(struct drm_gem_object *obj);
static void i915_gem_object_free_page_list(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_get_aperture *args = data;
- struct drm_i915_gem_object *obj_priv;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
args->aper_size = dev->gtt_total;
- args->aper_available_size = args->aper_size;
-
- list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
- if (obj_priv->pin_count > 0)
- args->aper_available_size -= obj_priv->obj->size;
- }
+ args->aper_available_size = (args->aper_size -
+ atomic_read(&dev->pin_memory));
return 0;
}
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_set_domain_range(obj, args->offset, args->size,
- I915_GEM_DOMAIN_CPU, 0);
+ ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
+ args->size);
if (ret != 0) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
mutex_unlock(&dev->struct_mutex);
return ret;
}
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT);
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret)
goto fail;
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_set_domain(obj, file_priv,
- I915_GEM_DOMAIN_CPU, I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
/**
- * Called when user space prepares to use an object
+ * Called when user space prepares to use an object with the CPU, either
+ * through the mmap ioctl's mapping or a GTT mapping.
*/
int
i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
{
struct drm_i915_gem_set_domain *args = data;
struct drm_gem_object *obj;
+ uint32_t read_domains = args->read_domains;
+ uint32_t write_domain = args->write_domain;
int ret;
if (!(dev->driver->driver_features & DRIVER_GEM))
return -ENODEV;
+ /* Only handle setting domains to types used by the CPU. */
+ if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT))
+ return -EINVAL;
+
+ /* Having something in the write domain implies it's in the read
+ * domain, and only that read domain. Enforce that in the request.
+ */
+ if (write_domain != 0 && read_domains != write_domain)
+ return -EINVAL;
+
obj = drm_gem_object_lookup(dev, file_priv, args->handle);
if (obj == NULL)
return -EBADF;
mutex_lock(&dev->struct_mutex);
#if WATCH_BUF
DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n",
- obj, obj->size, args->read_domains, args->write_domain);
+ obj, obj->size, read_domains, write_domain);
#endif
- ret = i915_gem_set_domain(obj, file_priv,
- args->read_domains, args->write_domain);
+ if (read_domains & I915_GEM_DOMAIN_GTT) {
+ ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0);
+
+ /* Silently promote "you're not bound, there was nothing to do"
+ * to success, since the client was just asking us to
+ * make sure everything was done.
+ */
+ if (ret == -EINVAL)
+ ret = 0;
+ } else {
+ ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0);
+ }
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
obj_priv = obj->driver_private;
/* Pinned buffers may be scanout, so flush the cache */
- if ((obj->write_domain & I915_GEM_DOMAIN_CPU) && obj_priv->pin_count) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- }
+ if (obj_priv->pin_count)
+ i915_gem_object_flush_cpu_write_domain(obj);
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return ret;
}
static void
-i915_gem_object_move_to_active(struct drm_gem_object *obj)
+i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno)
{
struct drm_device *dev = obj->dev;
drm_i915_private_t *dev_priv = dev->dev_private;
/* Move from whatever list we were on to the tail of execution. */
list_move_tail(&obj_priv->list,
&dev_priv->mm.active_list);
+ obj_priv->last_rendering_seqno = seqno;
}
+static void
+i915_gem_object_move_to_flushing(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ BUG_ON(!obj_priv->active);
+ list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list);
+ obj_priv->last_rendering_seqno = 0;
+}
static void
i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
else
list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+ obj_priv->last_rendering_seqno = 0;
if (obj_priv->active) {
obj_priv->active = 0;
drm_gem_object_unreference(obj);
request->seqno = seqno;
request->emitted_jiffies = jiffies;
- request->flush_domains = flush_domains;
was_empty = list_empty(&dev_priv->mm.request_list);
list_add_tail(&request->list, &dev_priv->mm.request_list);
+ /* Associate any objects on the flushing list matching the write
+ * domain we're flushing with our flush.
+ */
+ if (flush_domains != 0) {
+ struct drm_i915_gem_object *obj_priv, *next;
+
+ list_for_each_entry_safe(obj_priv, next,
+ &dev_priv->mm.flushing_list, list) {
+ struct drm_gem_object *obj = obj_priv->obj;
+
+ if ((obj->write_domain & flush_domains) ==
+ obj->write_domain) {
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+ }
+ }
+
+ }
+
if (was_empty && !dev_priv->mm.suspended)
schedule_delayed_work(&dev_priv->mm.retire_work, HZ);
return seqno;
__func__, request->seqno, obj);
#endif
- if (obj->write_domain != 0) {
- list_move_tail(&obj_priv->list,
- &dev_priv->mm.flushing_list);
- } else {
+ if (obj->write_domain != 0)
+ i915_gem_object_move_to_flushing(obj);
+ else
i915_gem_object_move_to_inactive(obj);
- }
- }
-
- if (request->flush_domains != 0) {
- struct drm_i915_gem_object *obj_priv, *next;
-
- /* Clear the write domain and activity from any buffers
- * that are just waiting for a flush matching the one retired.
- */
- list_for_each_entry_safe(obj_priv, next,
- &dev_priv->mm.flushing_list, list) {
- struct drm_gem_object *obj = obj_priv->obj;
-
- if (obj->write_domain & request->flush_domains) {
- obj->write_domain = 0;
- i915_gem_object_move_to_inactive(obj);
- }
- }
-
}
}
struct drm_i915_gem_object *obj_priv = obj->driver_private;
int ret;
- /* If there are writes queued to the buffer, flush and
- * create a new seqno to wait for.
+ /* This function only exists to support waiting for existing rendering,
+ * not for emitting required flushes.
*/
- if (obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)) {
- uint32_t write_domain = obj->write_domain;
-#if WATCH_BUF
- DRM_INFO("%s: flushing object %p from write domain %08x\n",
- __func__, obj, write_domain);
-#endif
- i915_gem_flush(dev, 0, write_domain);
-
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = i915_add_request(dev,
- write_domain);
- BUG_ON(obj_priv->last_rendering_seqno == 0);
-#if WATCH_LRU
- DRM_INFO("%s: flush moves to exec list %p\n", __func__, obj);
-#endif
- }
+ BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0);
/* If there is rendering queued on the buffer being evicted, wait for
* it.
return -EINVAL;
}
- /* Wait for any rendering to complete
- */
- ret = i915_gem_object_wait_rendering(obj);
- if (ret) {
- DRM_ERROR("wait_rendering failed: %d\n", ret);
- return ret;
- }
-
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
* also ensure that all pending GPU writes are finished
* before we unbind.
*/
- ret = i915_gem_object_set_domain(obj, I915_GEM_DOMAIN_CPU,
- I915_GEM_DOMAIN_CPU);
+ ret = i915_gem_object_set_to_cpu_domain(obj, 1);
if (ret) {
- DRM_ERROR("set_domain failed: %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("set_domain failed: %d\n", ret);
return ret;
}
return ret;
}
+static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+ int ret;
+
+ for (;;) {
+ ret = i915_gem_evict_something(dev);
+ if (ret != 0)
+ break;
+ }
+ if (ret == -ENOMEM)
+ return 0;
+ return ret;
+}
+
static int
i915_gem_object_get_page_list(struct drm_gem_object *obj)
{
ret = i915_gem_evict_something(dev);
if (ret != 0) {
- DRM_ERROR("Failed to evict a buffer %d\n", ret);
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to evict a buffer %d\n", ret);
return ret;
}
goto search_free;
drm_clflush_pages(obj_priv->page_list, obj->size / PAGE_SIZE);
}
+/** Flushes any GPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ uint32_t seqno;
+
+ if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
+ return;
+
+ /* Queue the GPU write cache flushing we need. */
+ i915_gem_flush(dev, 0, obj->write_domain);
+ seqno = i915_add_request(dev, obj->write_domain);
+ obj->write_domain = 0;
+ i915_gem_object_move_to_active(obj, seqno);
+}
+
+/** Flushes the GTT write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
+{
+ if (obj->write_domain != I915_GEM_DOMAIN_GTT)
+ return;
+
+ /* No actual flushing is required for the GTT write domain. Writes
+ * to it immediately go to main memory as far as we know, so there's
+ * no chipset flush. It also doesn't land in render cache.
+ */
+ obj->write_domain = 0;
+}
+
+/** Flushes the CPU write domain for the object if it's dirty. */
+static void
+i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+
+ if (obj->write_domain != I915_GEM_DOMAIN_CPU)
+ return;
+
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+ obj->write_domain = 0;
+}
+
+/**
+ * Moves a single object to the GTT read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int ret;
+
+ /* Not valid to be called on unbound objects. */
+ if (obj_priv->gtt_space == NULL)
+ return -EINVAL;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ /* If we're writing through the GTT domain, then CPU and GPU caches
+ * will need to be invalidated at next use.
+ */
+ if (write)
+ obj->read_domains &= I915_GEM_DOMAIN_GTT;
+
+ i915_gem_object_flush_cpu_write_domain(obj);
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0);
+ obj->read_domains |= I915_GEM_DOMAIN_GTT;
+ if (write) {
+ obj->write_domain = I915_GEM_DOMAIN_GTT;
+ obj_priv->dirty = 1;
+ }
+
+ return 0;
+}
+
+/**
+ * Moves a single object to the CPU read, and possibly write domain.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
+{
+ struct drm_device *dev = obj->dev;
+ int ret;
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
+ ret = i915_gem_object_wait_rendering(obj);
+ if (ret != 0)
+ return ret;
+
+ i915_gem_object_flush_gtt_write_domain(obj);
+
+ /* If we have a partially-valid cache of the object in the CPU,
+ * finish invalidating it and free the per-page flags.
+ */
+ i915_gem_object_set_to_full_cpu_read_domain(obj);
+
+ /* Flush the CPU cache if it's still invalid. */
+ if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
+ i915_gem_clflush_object(obj);
+ drm_agp_chipset_flush(dev);
+
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+ }
+
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
+ */
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+
+ /* If we're writing through the CPU, then the GPU read domains will
+ * need to be invalidated at next use.
+ */
+ if (write) {
+ obj->read_domains &= I915_GEM_DOMAIN_CPU;
+ obj->write_domain = I915_GEM_DOMAIN_CPU;
+ }
+
+ return 0;
+}
+
/*
* Set the next domain for the specified object. This
* may not actually perform the necessary flushing/invaliding though,
* MI_FLUSH
* drm_agp_chipset_flush
*/
-static int
-i915_gem_object_set_domain(struct drm_gem_object *obj,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
+ uint32_t read_domains,
+ uint32_t write_domain)
{
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
- int ret;
+
+ BUG_ON(read_domains & I915_GEM_DOMAIN_CPU);
+ BUG_ON(write_domain == I915_GEM_DOMAIN_CPU);
#if WATCH_BUF
DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n",
DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n",
__func__, flush_domains, invalidate_domains);
#endif
- /*
- * If we're invaliding the CPU cache and flushing a GPU cache,
- * then pause for rendering so that the GPU caches will be
- * flushed before the cpu cache is invalidated
- */
- if ((invalidate_domains & I915_GEM_DOMAIN_CPU) &&
- (flush_domains & ~(I915_GEM_DOMAIN_CPU |
- I915_GEM_DOMAIN_GTT))) {
- ret = i915_gem_object_wait_rendering(obj);
- if (ret)
- return ret;
- }
i915_gem_clflush_object(obj);
}
if ((write_domain | flush_domains) != 0)
obj->write_domain = write_domain;
-
- /* If we're invalidating the CPU domain, clear the per-page CPU
- * domain list as well.
- */
- if (obj_priv->page_cpu_valid != NULL &&
- (write_domain != 0 ||
- read_domains & I915_GEM_DOMAIN_CPU)) {
- drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
- DRM_MEM_DRIVER);
- obj_priv->page_cpu_valid = NULL;
- }
obj->read_domains = read_domains;
dev->invalidate_domains |= invalidate_domains;
obj->read_domains, obj->write_domain,
dev->invalidate_domains, dev->flush_domains);
#endif
- return 0;
}
/**
- * Set the read/write domain on a range of the object.
+ * Moves the object from a partially CPU read to a full one.
*
- * Currently only implemented for CPU reads, otherwise drops to normal
- * i915_gem_object_set_domain().
+ * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(),
+ * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU).
*/
-static int
-i915_gem_object_set_domain_range(struct drm_gem_object *obj,
- uint64_t offset,
- uint64_t size,
- uint32_t read_domains,
- uint32_t write_domain)
+static void
+i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj)
{
+ struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
- int ret, i;
- if (obj->read_domains & I915_GEM_DOMAIN_CPU)
- return 0;
+ if (!obj_priv->page_cpu_valid)
+ return;
- if (read_domains != I915_GEM_DOMAIN_CPU ||
- write_domain != 0)
- return i915_gem_object_set_domain(obj,
- read_domains, write_domain);
+ /* If we're partially in the CPU read domain, finish moving it in.
+ */
+ if (obj->read_domains & I915_GEM_DOMAIN_CPU) {
+ int i;
- /* Wait on any GPU rendering to the object to be flushed. */
+ for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) {
+ if (obj_priv->page_cpu_valid[i])
+ continue;
+ drm_clflush_pages(obj_priv->page_list + i, 1);
+ }
+ drm_agp_chipset_flush(dev);
+ }
+
+ /* Free the page_cpu_valid mappings which are now stale, whether
+ * or not we've got I915_GEM_DOMAIN_CPU.
+ */
+ drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE,
+ DRM_MEM_DRIVER);
+ obj_priv->page_cpu_valid = NULL;
+}
+
+/**
+ * Set the CPU read domain on a range of the object.
+ *
+ * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's
+ * not entirely valid. The page_cpu_valid member of the object flags which
+ * pages have been flushed, and will be respected by
+ * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping
+ * of the whole object.
+ *
+ * This function returns when the move is complete, including waiting on
+ * flushes to occur.
+ */
+static int
+i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
+ uint64_t offset, uint64_t size)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int i, ret;
+
+ if (offset == 0 && size == obj->size)
+ return i915_gem_object_set_to_cpu_domain(obj, 0);
+
+ i915_gem_object_flush_gpu_write_domain(obj);
+ /* Wait on any GPU rendering and flushing to occur. */
ret = i915_gem_object_wait_rendering(obj);
- if (ret)
+ if (ret != 0)
return ret;
+ i915_gem_object_flush_gtt_write_domain(obj);
+ /* If we're already fully in the CPU read domain, we're done. */
+ if (obj_priv->page_cpu_valid == NULL &&
+ (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0)
+ return 0;
+
+ /* Otherwise, create/clear the per-page CPU read domain flag if we're
+ * newly adding I915_GEM_DOMAIN_CPU
+ */
if (obj_priv->page_cpu_valid == NULL) {
obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE,
DRM_MEM_DRIVER);
- }
+ if (obj_priv->page_cpu_valid == NULL)
+ return -ENOMEM;
+ } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0)
+ memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE);
/* Flush the cache on any pages that are still invalid from the CPU's
* perspective.
*/
- for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) {
+ for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE;
+ i++) {
if (obj_priv->page_cpu_valid[i])
continue;
obj_priv->page_cpu_valid[i] = 1;
}
- return 0;
-}
-
-/**
- * Once all of the objects have been set in the proper domain,
- * perform the necessary flush and invalidate operations.
- *
- * Returns the write domains flushed, for use in flush tracking.
- */
-static uint32_t
-i915_gem_dev_set_domain(struct drm_device *dev)
-{
- uint32_t flush_domains = dev->flush_domains;
-
- /*
- * Now that all the buffers are synced to the proper domains,
- * flush and invalidate the collected domains
+ /* It should now be out of any other write domains, and we can update
+ * the domain values for our changes.
*/
- if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
- DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
- __func__,
- dev->invalidate_domains,
- dev->flush_domains);
-#endif
- i915_gem_flush(dev,
- dev->invalidate_domains,
- dev->flush_domains);
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
- }
+ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
- return flush_domains;
+ obj->read_domains |= I915_GEM_DOMAIN_CPU;
+
+ return 0;
}
/**
return -EINVAL;
}
+ if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc.read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc.target_handle,
+ (int) reloc.offset,
+ reloc.read_domains,
+ reloc.write_domain);
+ return -EINVAL;
+ }
+
if (reloc.write_domain && target_obj->pending_write_domain &&
reloc.write_domain != target_obj->pending_write_domain) {
DRM_ERROR("Write domain conflict: "
continue;
}
- /* Now that we're going to actually write some data in,
- * make sure that any rendering using this buffer's contents
- * is completed.
- */
- i915_gem_object_wait_rendering(obj);
-
- /* As we're writing through the gtt, flush
- * any CPU writes before we write the relocations
- */
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
+ ret = i915_gem_object_set_to_gtt_domain(obj, 1);
+ if (ret != 0) {
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
}
/* Map the page containing the relocation we're going to
int ret, i, pinned = 0;
uint64_t exec_offset;
uint32_t seqno, flush_domains;
+ int pin_tries;
#if WATCH_EXEC
DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n",
return -EBUSY;
}
- /* Zero the gloabl flush/invalidate flags. These
- * will be modified as each object is bound to the
- * gtt
- */
- dev->invalidate_domains = 0;
- dev->flush_domains = 0;
-
- /* Look up object handles and perform the relocations */
+ /* Look up object handles */
for (i = 0; i < args->buffer_count; i++) {
object_list[i] = drm_gem_object_lookup(dev, file_priv,
exec_list[i].handle);
ret = -EBADF;
goto err;
}
+ }
- object_list[i]->pending_read_domains = 0;
- object_list[i]->pending_write_domain = 0;
- ret = i915_gem_object_pin_and_relocate(object_list[i],
- file_priv,
- &exec_list[i]);
- if (ret) {
- DRM_ERROR("object bind and relocate failed %d\n", ret);
+ /* Pin and relocate */
+ for (pin_tries = 0; ; pin_tries++) {
+ ret = 0;
+ for (i = 0; i < args->buffer_count; i++) {
+ object_list[i]->pending_read_domains = 0;
+ object_list[i]->pending_write_domain = 0;
+ ret = i915_gem_object_pin_and_relocate(object_list[i],
+ file_priv,
+ &exec_list[i]);
+ if (ret)
+ break;
+ pinned = i + 1;
+ }
+ /* success */
+ if (ret == 0)
+ break;
+
+ /* error other than GTT full, or we've already tried again */
+ if (ret != -ENOMEM || pin_tries >= 1) {
+ DRM_ERROR("Failed to pin buffers %d\n", ret);
goto err;
}
- pinned = i + 1;
+
+ /* unpin all of our buffers */
+ for (i = 0; i < pinned; i++)
+ i915_gem_object_unpin(object_list[i]);
+
+ /* evict everyone we can from the aperture */
+ ret = i915_gem_evict_everything(dev);
+ if (ret)
+ goto err;
}
/* Set the pending read domains for the batch buffer to COMMAND */
i915_verify_inactive(dev, __FILE__, __LINE__);
+ /* Zero the global flush/invalidate flags. These
+ * will be modified as new domains are computed
+ * for each object
+ */
+ dev->invalidate_domains = 0;
+ dev->flush_domains = 0;
+
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
- if (obj_priv->gtt_space == NULL) {
- /* We evicted the buffer in the process of validating
- * our set of buffers in. We could try to recover by
- * kicking them everything out and trying again from
- * the start.
- */
- ret = -ENOMEM;
- goto err;
- }
-
- /* make sure all previous memory operations have passed */
- ret = i915_gem_object_set_domain(obj,
- obj->pending_read_domains,
- obj->pending_write_domain);
- if (ret)
- goto err;
+ /* Compute new gpu domains and update invalidate/flush */
+ i915_gem_object_set_to_gpu_domain(obj,
+ obj->pending_read_domains,
+ obj->pending_write_domain);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
- /* Flush/invalidate caches and chipset buffer */
- flush_domains = i915_gem_dev_set_domain(dev);
+ if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+ DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+ __func__,
+ dev->invalidate_domains,
+ dev->flush_domains);
+#endif
+ i915_gem_flush(dev,
+ dev->invalidate_domains,
+ dev->flush_domains);
+ if (dev->flush_domains)
+ (void)i915_add_request(dev, dev->flush_domains);
+ }
i915_verify_inactive(dev, __FILE__, __LINE__);
~0);
#endif
- (void)i915_add_request(dev, flush_domains);
-
/* Exec the batchbuffer */
ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset);
if (ret) {
i915_file_priv->mm.last_gem_seqno = seqno;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
- struct drm_i915_gem_object *obj_priv = obj->driver_private;
- i915_gem_object_move_to_active(obj);
- obj_priv->last_rendering_seqno = seqno;
+ i915_gem_object_move_to_active(obj, seqno);
#if WATCH_LRU
DRM_INFO("%s: move to exec list %p\n", __func__, obj);
#endif
/* XXX - flush the CPU caches for pinned objects
* as the X server doesn't manage domains yet
*/
- if (obj->write_domain & I915_GEM_DOMAIN_CPU) {
- i915_gem_clflush_object(obj);
- drm_agp_chipset_flush(dev);
- obj->write_domain = 0;
- }
+ i915_gem_object_flush_cpu_write_domain(obj);
args->offset = obj_priv->gtt_offset;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
}
obj_priv = obj->driver_private;
- args->busy = obj_priv->active;
+ /* Don't count being on the flushing list against the object being
+ * done. Otherwise, a buffer left on the flushing list but not getting
+ * flushed (because nobody's flushing that domain) won't ever return
+ * unbusy and get reused by libdrm's bo cache. The other expected
+ * consumer of this interface, OpenGL's occlusion queries, also specs
+ * that the objects get unbusy "eventually" without any interference.
+ */
+ args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0;
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
-static int
-i915_gem_set_domain(struct drm_gem_object *obj,
- struct drm_file *file_priv,
- uint32_t read_domains,
- uint32_t write_domain)
-{
- struct drm_device *dev = obj->dev;
- int ret;
- uint32_t flush_domains;
-
- BUG_ON(!mutex_is_locked(&dev->struct_mutex));
-
- ret = i915_gem_object_set_domain(obj, read_domains, write_domain);
- if (ret)
- return ret;
- flush_domains = i915_gem_dev_set_domain(obj->dev);
-
- if (flush_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT))
- (void) i915_add_request(dev, flush_domains);
-
- return 0;
-}
-
/** Unbinds all objects that are on the given buffer list. */
static int
i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
i915_gem_retire_requests(dev);
- /* Active and flushing should now be empty as we've
- * waited for a sequence higher than any pending execbuffer
- */
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
+ if (!dev_priv->mm.wedged) {
+ /* Active and flushing should now be empty as we've
+ * waited for a sequence higher than any pending execbuffer
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.active_list));
+ WARN_ON(!list_empty(&dev_priv->mm.flushing_list));
+ /* Request should now be empty as we've also waited
+ * for the last request in the list
+ */
+ WARN_ON(!list_empty(&dev_priv->mm.request_list));
+ }
- /* Request should now be empty as we've also waited
- * for the last request in the list
+ /* Empty the active and flushing lists to inactive. If there's
+ * anything left at this point, it means that we're wedged and
+ * nothing good's going to happen by leaving them there. So strip
+ * the GPU domains and just stuff them onto inactive.
*/
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
+ while (!list_empty(&dev_priv->mm.active_list)) {
+ struct drm_i915_gem_object *obj_priv;
+
+ obj_priv = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+ while (!list_empty(&dev_priv->mm.flushing_list)) {
+ struct drm_i915_gem_object *obj_priv;
- /* Move all buffers out of the GTT. */
+ obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list);
+ obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj_priv->obj);
+ }
+
+
+ /* Move all inactive buffers out of the GTT. */
ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
return ret;
}
- BUG_ON(!list_empty(&dev_priv->mm.active_list));
- BUG_ON(!list_empty(&dev_priv->mm.flushing_list));
- BUG_ON(!list_empty(&dev_priv->mm.inactive_list));
- BUG_ON(!list_empty(&dev_priv->mm.request_list));
-
i915_gem_cleanup_ringbuffer(dev);
mutex_unlock(&dev->struct_mutex);
list_for_each_entry(gem_request, &dev_priv->mm.request_list,
list)
{
- DRM_PROC_PRINT(" %d @ %d %08x\n",
+ DRM_PROC_PRINT(" %d @ %d\n",
gem_request->seqno,
- (int) (jiffies - gem_request->emitted_jiffies),
- gem_request->flush_domains);
+ (int) (jiffies - gem_request->emitted_jiffies));
}
if (len > request + offset)
return request;
dcc & DCC_CHANNEL_XOR_DISABLE) {
swizzle_x = I915_BIT_6_SWIZZLE_9_10;
swizzle_y = I915_BIT_6_SWIZZLE_9;
- } else if (IS_I965GM(dev) || IS_GM45(dev)) {
- /* GM965 only does bit 11-based channel
- * randomization
+ } else if ((IS_I965GM(dev) || IS_GM45(dev)) &&
+ (dcc & DCC_CHANNEL_XOR_BIT_17) == 0) {
+ /* GM965/GM45 does either bit 11 or bit 17
+ * swizzling.
*/
swizzle_x = I915_BIT_6_SWIZZLE_9_10_11;
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
#define MAX_NOPID ((u32)~0)
-/** These are the interrupts used by the driver */
-#define I915_INTERRUPT_ENABLE_MASK (I915_USER_INTERRUPT | \
- I915_ASLE_INTERRUPT | \
- I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+/**
+ * Interrupts that are always left unmasked.
+ *
+ * Since pipe events are edge-triggered from the PIPESTAT register to IIR,
+ * we leave them always unmasked in IMR and then control enabling them through
+ * PIPESTAT alone.
+ */
+#define I915_INTERRUPT_ENABLE_FIX (I915_ASLE_INTERRUPT | \
+ I915_DISPLAY_PIPE_A_EVENT_INTERRUPT | \
+ I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+
+/** Interrupts that we mask and unmask at runtime. */
+#define I915_INTERRUPT_ENABLE_VAR (I915_USER_INTERRUPT)
+
+/** These are all of the interrupts used by the driver */
+#define I915_INTERRUPT_ENABLE_MASK (I915_INTERRUPT_ENABLE_FIX | \
+ I915_INTERRUPT_ENABLE_VAR)
void
i915_enable_irq(drm_i915_private_t *dev_priv, u32 mask)
}
}
+static inline u32
+i915_pipestat(int pipe)
+{
+ if (pipe == 0)
+ return PIPEASTAT;
+ if (pipe == 1)
+ return PIPEBSTAT;
+ BUG();
+}
+
+void
+i915_enable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != mask) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] |= mask;
+ /* Enable the interrupt, clear any pending status */
+ I915_WRITE(reg, dev_priv->pipestat[pipe] | (mask >> 16));
+ (void) I915_READ(reg);
+ }
+}
+
+void
+i915_disable_pipestat(drm_i915_private_t *dev_priv, int pipe, u32 mask)
+{
+ if ((dev_priv->pipestat[pipe] & mask) != 0) {
+ u32 reg = i915_pipestat(pipe);
+
+ dev_priv->pipestat[pipe] &= ~mask;
+ I915_WRITE(reg, dev_priv->pipestat[pipe]);
+ (void) I915_READ(reg);
+ }
+}
+
/**
* i915_pipe_enabled - check if a pipe is enabled
* @dev: DRM device
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u32 iir, new_iir;
u32 pipea_stats, pipeb_stats;
+ u32 vblank_status;
+ u32 vblank_enable;
int vblank = 0;
+ unsigned long irqflags;
+ int irq_received;
+ int ret = IRQ_NONE;
atomic_inc(&dev_priv->irq_received);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, ~0);
iir = I915_READ(IIR);
- if (iir == 0) {
- if (dev->pdev->msi_enabled) {
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IMR);
- }
- return IRQ_NONE;
+ if (IS_I965G(dev)) {
+ vblank_status = I915_START_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ } else {
+ vblank_status = I915_VBLANK_INTERRUPT_STATUS;
+ vblank_enable = I915_VBLANK_INTERRUPT_ENABLE;
}
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
+ for (;;) {
+ irq_received = iir != 0;
+
+ /* Can't rely on pipestat interrupt bit in iir as it might
+ * have been cleared after the pipestat interrupt was received.
+ * It doesn't set the bit in iir again, but it still produces
+ * interrupts (for non-MSI).
+ */
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
pipea_stats = I915_READ(PIPEASTAT);
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A))
- pipea_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ pipeb_stats = I915_READ(PIPEBSTAT);
+ /*
+ * Clear the PIPE(A|B)STAT regs before the IIR
+ */
+ if (pipea_stats & 0x8000ffff) {
+ I915_WRITE(PIPEASTAT, pipea_stats);
+ irq_received = 1;
+ }
+
+ if (pipeb_stats & 0x8000ffff) {
+ I915_WRITE(PIPEBSTAT, pipeb_stats);
+ irq_received = 1;
+ }
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
+
+ if (!irq_received)
+ break;
+
+ ret = IRQ_HANDLED;
+
+ I915_WRITE(IIR, iir);
+ new_iir = I915_READ(IIR); /* Flush posted writes */
+
+ if (dev_priv->sarea_priv)
+ dev_priv->sarea_priv->last_dispatch =
+ READ_BREADCRUMB(dev_priv);
+
+ if (iir & I915_USER_INTERRUPT) {
+ dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
+ if (pipea_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 0);
}
- I915_WRITE(PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(PIPEBSTAT);
- /* Ack the event */
- I915_WRITE(PIPEBSTAT, pipeb_stats);
-
- /* The vblank interrupt gets enabled even if we didn't ask for
- it, so make sure it's shut down again */
- if (!(dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B))
- pipeb_stats &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
- PIPE_VBLANK_INTERRUPT_STATUS)) {
+ if (pipeb_stats & vblank_status) {
vblank++;
drm_handle_vblank(dev, 1);
}
- if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS)
+ if ((pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) ||
+ (iir & I915_ASLE_INTERRUPT))
opregion_asle_intr(dev);
- I915_WRITE(PIPEBSTAT, pipeb_stats);
- }
-
- I915_WRITE(IIR, iir);
- if (dev->pdev->msi_enabled)
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
- (void) I915_READ(IIR); /* Flush posted writes */
-
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
- if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
- DRM_WAKEUP(&dev_priv->irq_queue);
+ /* With MSI, interrupts are only generated when iir
+ * transitions from zero to nonzero. If another bit got
+ * set while we were handling the existing iir bits, then
+ * we would never get another interrupt.
+ *
+ * This is fine on non-MSI as well, as if we hit this path
+ * we avoid exiting the interrupt handler only to generate
+ * another one.
+ *
+ * Note that for MSI this could cause a stray interrupt report
+ * if an interrupt landed in the time between writing IIR and
+ * the posting read. This should be rare enough to never
+ * trigger the 99% of 100,000 interrupts test for disabling
+ * stray interrupts.
+ */
+ iir = new_iir;
}
- if (iir & I915_ASLE_INTERRUPT)
- opregion_asle_intr(dev);
-
- return IRQ_HANDLED;
+ return ret;
}
static int i915_emit_irq(struct drm_device * dev)
int i915_enable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- return 0;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- /* Enabling vblank events in IMR comes before PIPESTAT write, or
- * there's a race where the PIPESTAT vblank bit gets set to 1, so
- * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in
- * ISR flashes to 1, but the IIR bit doesn't get set to 1 because
- * IMR masks it. It doesn't ever get set after we clear the masking
- * in IMR because the ISR bit is edge, not level-triggered, on the
- * OR of PIPESTAT bits.
- */
- i915_enable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
if (IS_I965G(dev))
- pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
else
- pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
-
return 0;
}
void i915_disable_vblank(struct drm_device *dev, int pipe)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 pipestat_reg = 0;
- u32 pipestat;
- u32 interrupt = 0;
unsigned long irqflags;
- switch (pipe) {
- case 0:
- pipestat_reg = PIPEASTAT;
- interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = PIPEBSTAT;
- interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- return;
- break;
- }
-
spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
- i915_disable_irq(dev_priv, interrupt);
- pipestat = I915_READ(pipestat_reg);
- pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
- PIPE_VBLANK_INTERRUPT_ENABLE);
- /* Clear any stale interrupt status */
- pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
- PIPE_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- (void) I915_READ(pipestat_reg); /* Posting read */
+ i915_disable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE |
+ PIPE_START_VBLANK_INTERRUPT_ENABLE);
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
I915_WRITE(HWSTAM, 0xeffe);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
+ (void) I915_READ(IER);
}
int i915_driver_irq_postinstall(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
-
- /* Set initial unmasked IRQs to just the selected vblank pipes. */
- dev_priv->irq_mask_reg = ~0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT;
- dev_priv->irq_mask_reg &= ~I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT;
dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
- dev_priv->irq_mask_reg &= I915_INTERRUPT_ENABLE_MASK;
+ /* Unmask the interrupts that we always want on. */
+ dev_priv->irq_mask_reg = ~I915_INTERRUPT_ENABLE_FIX;
+
+ dev_priv->pipestat[0] = 0;
+ dev_priv->pipestat[1] = 0;
+
+ /* Disable pipe interrupt enables, clear pending pipe status */
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ /* Clear pending interrupt status */
+ I915_WRITE(IIR, I915_READ(IIR));
- I915_WRITE(IMR, dev_priv->irq_mask_reg);
I915_WRITE(IER, I915_INTERRUPT_ENABLE_MASK);
+ I915_WRITE(IMR, dev_priv->irq_mask_reg);
(void) I915_READ(IER);
opregion_enable_asle(dev);
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
if (!dev_priv)
return;
dev_priv->vblank_pipe = 0;
I915_WRITE(HWSTAM, 0xffffffff);
+ I915_WRITE(PIPEASTAT, 0);
+ I915_WRITE(PIPEBSTAT, 0);
I915_WRITE(IMR, 0xffffffff);
I915_WRITE(IER, 0x0);
- temp = I915_READ(PIPEASTAT);
- I915_WRITE(PIPEASTAT, temp);
- temp = I915_READ(PIPEBSTAT);
- I915_WRITE(PIPEBSTAT, temp);
- temp = I915_READ(IIR);
- I915_WRITE(IIR, temp);
+ I915_WRITE(PIPEASTAT, I915_READ(PIPEASTAT) & 0x8000ffff);
+ I915_WRITE(PIPEBSTAT, I915_READ(PIPEBSTAT) & 0x8000ffff);
+ I915_WRITE(IIR, I915_READ(IIR));
}
struct opregion_asle *asle = dev_priv->opregion.asle;
if (asle) {
- u32 pipeb_stats = I915_READ(PIPEBSTAT);
if (IS_MOBILE(dev)) {
- /* Many devices trigger events with a write to the
- legacy backlight controller, so we need to ensure
- that it's able to generate interrupts */
- I915_WRITE(PIPEBSTAT, pipeb_stats |=
- I915_LEGACY_BLC_EVENT_ENABLE);
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT |
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT);
- } else
- i915_enable_irq(dev_priv, I915_ASLE_INTERRUPT);
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags);
+ i915_enable_pipestat(dev_priv, 1,
+ I915_LEGACY_BLC_EVENT_ENABLE);
+ spin_unlock_irqrestore(&dev_priv->user_irq_lock,
+ irqflags);
+ }
asle->tche = ASLE_ALS_EN | ASLE_BLC_EN | ASLE_PFIT_EN |
ASLE_PFMB_EN;
#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0)
#define DCC_ADDRESSING_MODE_MASK (3 << 0)
#define DCC_CHANNEL_XOR_DISABLE (1 << 10)
+#define DCC_CHANNEL_XOR_BIT_17 (1 << 9)
/** 965 MCH register controlling DRAM channel configuration */
#define C0DRB3 0x10206
if (IS_I965G(dev) && IS_MOBILE(dev))
dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
if (IS_I965G(dev) && IS_MOBILE(dev))
I915_WRITE(MCHBAR_RENDER_STANDBY, dev_priv->saveRENDERSTANDBY);
+ /* Hardware status page */
+ I915_WRITE(HWS_PGA, dev_priv->saveHWS);
+
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
int mga_driver_load(struct drm_device * dev, unsigned long flags)
{
drm_mga_private_t *dev_priv;
+ int ret;
dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
if (!dev_priv)
dev->types[7] = _DRM_STAT_PRIMARY;
dev->types[8] = _DRM_STAT_SECONDARY;
+ ret = drm_vblank_init(dev, 1);
+
+ if (ret) {
+ (void) mga_driver_unload(dev);
+ return ret;
+ }
+
return 0;
}
int mga_driver_irq_postinstall(struct drm_device *dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
+ .load = r128_driver_load,
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
.get_vblank_counter = r128_get_vblank_counter,
.patchlevel = DRIVER_PATCHLEVEL,
};
+int r128_driver_load(struct drm_device * dev, unsigned long flags)
+{
+ return drm_vblank_init(dev, 1);
+}
+
static int __init r128_init(void)
{
driver.num_ioctls = r128_max_ioctl;
extern int r128_driver_irq_postinstall(struct drm_device *dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
+extern int r128_driver_load(struct drm_device * dev, unsigned long flags);
extern void r128_driver_preclose(struct drm_device * dev,
struct drm_file *file_priv);
int r128_driver_irq_postinstall(struct drm_device *dev)
{
- return drm_vblank_init(dev, 1);
+ return 0;
}
void r128_driver_irq_uninstall(struct drm_device * dev)
if (ret != 0)
return ret;
+ ret = drm_vblank_init(dev, 2);
+ if (ret) {
+ radeon_driver_unload(dev);
+ return ret;
+ }
+
DRM_DEBUG("%s card detected\n",
((dev_priv->flags & RADEON_IS_AGP) ? "AGP" : (((dev_priv->flags & RADEON_IS_PCIE) ? "PCIE" : "PCI"))));
return ret;
atomic_t swi_emitted;
int vblank_crtc;
uint32_t irq_enable_reg;
- int irq_enabled;
uint32_t r500_disp_irq_reg;
struct radeon_surface surfaces[RADEON_MAX_SURFACES];
else
dev_priv->irq_enable_reg &= ~mask;
- RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
+ if (dev->irq_enabled)
+ RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
}
static void r500_vbl_irq_set_state(struct drm_device *dev, u32 mask, int state)
else
dev_priv->r500_disp_irq_reg &= ~mask;
- RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
+ if (dev->irq_enabled)
+ RADEON_WRITE(R500_DxMODE_INT_MASK, dev_priv->r500_disp_irq_reg);
}
int radeon_enable_vblank(struct drm_device *dev, int crtc)
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
dev->max_vblank_count = 0x001fffff;
radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
if (!dev_priv)
return;
- dev_priv->irq_enabled = 0;
-
if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RS690)
RADEON_WRITE(R500_DxMODE_INT_MASK, 0);
/* Disable *all* interrupts */
if (!dev_priv)
return -EINVAL;
- drm_vblank_init(dev, 1);
status = VIA_READ(VIA_REG_INTERRUPT);
VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
| dev_priv->irq_enable_mask);
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
drm_free(dev_priv, sizeof(*dev_priv), DRM_MEM_DRIVER);
+ return ret;
}
- return ret;
+
+ ret = drm_vblank_init(dev, 1);
+ if (ret) {
+ drm_sman_takedown(&dev_priv->sman);
+ drm_free(dev_priv, sizeof(drm_via_private_t), DRM_MEM_DRIVER);
+ return ret;
+ }
+
+ return 0;
}
int via_driver_unload(struct drm_device *dev)
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_RDESC_JIS },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
APPLE_ISO_KEYBOARD },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
.driver_data = APPLE_HAS_FN },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_SK8115) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERIC_13BA, USB_DEVICE_ID_GENERIC_13BA_KBD_MOUSE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_SUPER_Q2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_GOGOPEN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GOTOP, USB_DEVICE_ID_PENPOWER) },
- { HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRETAGMACBETH, USB_DEVICE_ID_GRETAGMACBETH_HUEY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_POWERMATE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GRIFFIN, USB_DEVICE_ID_SOUNDKNOB) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_ISO) },
- { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING3_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
+#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
static const struct hid_device_id pl_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR),
.driver_data = 1 }, /* Twin USB Joystick */
+ { HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR),
+ .driver_data = 1 }, /* Twin USB Joystick */
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003), }, /* GreenAsia Inc. USB Joystick */
{ }
};
if (insize > HID_MAX_BUFFER_SIZE)
insize = HID_MAX_BUFFER_SIZE;
- mutex_lock(&usbhid->setup);
if (hid_alloc_buffers(dev, hid)) {
ret = -ENOMEM;
goto fail;
hid_dump_device(hid);
set_bit(HID_STARTED, &usbhid->iofl);
- mutex_unlock(&usbhid->setup);
return 0;
usbhid->urbout = NULL;
usbhid->urbctrl = NULL;
hid_free_buffers(dev, hid);
- mutex_unlock(&usbhid->setup);
return ret;
}
if (WARN_ON(!usbhid))
return;
- mutex_lock(&usbhid->setup);
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
usbhid->urbout = NULL;
hid_free_buffers(hid_to_usb_dev(hid), hid);
- mutex_unlock(&usbhid->setup);
}
static struct hid_ll_driver usb_hid_driver = {
hid->driver_data = usbhid;
usbhid->hid = hid;
- mutex_init(&usbhid->setup); /* needed on suspend/resume */
ret = hid_add_device(hid);
if (ret) {
struct hid_device *hid = usb_get_intfdata (intf);
struct usbhid_device *usbhid = hid->driver_data;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
spin_lock_irq(&usbhid->inlock); /* Sync with error handler */
set_bit(HID_SUSPENDED, &usbhid->iofl);
spin_unlock_irq(&usbhid->inlock);
del_timer_sync(&usbhid->io_retry);
usb_kill_urb(usbhid->urbin);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "suspend\n");
return 0;
}
struct usbhid_device *usbhid = hid->driver_data;
int status;
- mutex_lock(&usbhid->setup);
- if (!test_bit(HID_STARTED, &usbhid->iofl)) {
- mutex_unlock(&usbhid->setup);
+ if (!test_bit(HID_STARTED, &usbhid->iofl))
return 0;
- }
clear_bit(HID_SUSPENDED, &usbhid->iofl);
usbhid->retry_delay = 0;
status = hid_start_in(hid);
- mutex_unlock(&usbhid->setup);
dev_dbg(&intf->dev, "resume status %d\n", status);
return status;
}
dma_addr_t outbuf_dma; /* Output buffer dma */
spinlock_t outlock; /* Output fifo spinlock */
- struct mutex setup;
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
struct timer_list io_retry; /* Retry timer */
unsigned long stop_retry; /* Time to give up, in jiffies */
MODULE_AUTHOR("Nicolas Boichat");
MODULE_DESCRIPTION("Apple SMC");
MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(dmi, applesmc_whitelist);
pmsg = &msgs[tptr];
if (pmsg->flags & I2C_M_RD)
ret = wait_event_interruptible_timeout(cpm->i2c_wait,
+ (in_be16(&tbdf[tptr].cbd_sc) & BD_SC_NAK) ||
!(in_be16(&rbdf[rptr].cbd_sc) & BD_SC_EMPTY),
1 * HZ);
else
static void smbus_write_data(u8 *src, u16 *dst, int len)
{
for (; len > 1; len -= 2) {
- *dst++ = be16_to_cpup((u16 *)src);
+ *dst++ = be16_to_cpup((__be16 *)src);
src += 2;
}
static void smbus_read_data(u16 *src, u8 *dst, int len)
{
for (; len > 1; len -= 2) {
- *(u16 *)dst = cpu_to_be16p(src++);
+ *(__be16 *)dst = cpu_to_be16p(src++);
dst += 2;
}
if (adapter_parm[type].init.val)
line_set(port, 1, &adapter_parm[type].init);
- parport_release(adapter->pdev);
-
if (i2c_bit_add_bus(&adapter->adapter) < 0) {
printk(KERN_ERR "i2c-parport: Unable to register with I2C\n");
goto ERROR1;
return;
ERROR1:
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
ERROR0:
kfree(adapter);
if (adapter_parm[type].init.val)
line_set(port, 0, &adapter_parm[type].init);
+ parport_release(adapter->pdev);
parport_unregister_device(adapter->pdev);
if (prev)
prev->next = adapter->next;
if (cmd->type == MSP_TWI_CMD_WRITE ||
cmd->type == MSP_TWI_CMD_WRITE_READ) {
- __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ u64 tmp = be64_to_cpup((__be64 *)cmd->write_data);
tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
struct s3c24xx_i2c {
spinlock_t lock;
wait_queue_head_t wait;
+ unsigned int suspended:1;
struct i2c_msg *msg;
unsigned int msg_num;
unsigned long timeout;
int ret;
- if (!(readl(i2c->regs + S3C2410_IICCON) & S3C2410_IICCON_IRQEN))
+ if (i2c->suspended)
return -EIO;
ret = s3c24xx_i2c_set_master(i2c);
}
#ifdef CONFIG_PM
+static int s3c24xx_i2c_suspend_late(struct platform_device *dev,
+ pm_message_t msg)
+{
+ struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
+ i2c->suspended = 1;
+ return 0;
+}
+
static int s3c24xx_i2c_resume(struct platform_device *dev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(dev);
- if (i2c != NULL)
- s3c24xx_i2c_init(i2c);
+ i2c->suspended = 0;
+ s3c24xx_i2c_init(i2c);
return 0;
}
#else
+#define s3c24xx_i2c_suspend_late NULL
#define s3c24xx_i2c_resume NULL
#endif
static struct platform_driver s3c2410_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
+ .suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
static struct platform_driver s3c2440_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove = s3c24xx_i2c_remove,
+ .suspend_late = s3c24xx_i2c_suspend_late,
.resume = s3c24xx_i2c_resume,
.driver = {
.owner = THIS_MODULE,
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb.h>
#include <linux/workqueue.h>
#include <asm/irq.h>
+#include <asm/mach-types.h>
+
#include <mach/usb.h>
+#include <mach/mux.h>
#ifndef DEBUG
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_MACH_OMAP_H2
-
/* board-specific PM hooks */
-#include <asm/gpio.h>
-#include <mach/mux.h>
-#include <asm/mach-types.h>
-
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE)
}
+#endif
+
+#if defined(CONFIG_MACH_OMAP_H4)
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
#endif
/*-------------------------------------------------------------------------*/
* NOTE: guaranteeing certain response times might mean we shouldn't
* share keventd's work queue; a realtime task might be safest.
*/
-void
-isp1301_defer_work(struct isp1301 *isp, int work)
+static void isp1301_defer_work(struct isp1301 *isp, int work)
{
int status;
otg_ctrl &= ~OTG_XCEIV_INPUTS;
otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
-
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
static int otg_remove(struct platform_device *dev)
{
- otg_dev = 0;
+ otg_dev = NULL;
return 0;
}
-struct platform_driver omap_otg_driver = {
+static struct platform_driver omap_otg_driver = {
.probe = otg_probe,
.remove = otg_remove,
.driver = {
isp = dev_get_drvdata(dev);
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
otg_unbind(isp);
#endif
if (machine_is_omap_h2())
- omap_free_gpio(2);
+ gpio_free(2);
isp->timer.data = 0;
set_bit(WORK_STOP, &isp->todo);
flush_scheduled_work();
put_device(&i2c->dev);
- the_transceiver = 0;
+ the_transceiver = NULL;
return 0;
}
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = 0;
+ isp->otg.host = NULL;
return 0;
}
isp1301_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+#ifndef CONFIG_USB_OTG
u32 l;
+#endif
if (!otg || isp != the_transceiver)
return -ENODEV;
if (!isp->otg.default_a)
enable_vbus_draw(isp, 0);
usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = 0;
+ isp->otg.gadget = NULL;
power_down(isp);
return 0;
}
power_up(isp);
isp->otg.state = OTG_STATE_B_IDLE;
- if (machine_is_omap_h2())
+ if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
/*-------------------------------------------------------------------------*/
-static int __init isp1301_probe(struct i2c_client *i2c)
+static int __init
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
int status;
struct isp1301 *isp;
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(0);
+ otg_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
/* detach any active clients. This must be done first, because
* it can fail; in which case we give up. */
- list_for_each_entry_safe(client, _n, &adap->clients, list) {
+ list_for_each_entry_safe_reverse(client, _n, &adap->clients, list) {
struct i2c_driver *driver;
driver = client->driver;
endif
+# TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
+ select BLK_DEV_IDEDMA_PCI
help
This driver provides support for the on-board IDE controller on
most of the recent Apple Power Macintoshes and PowerBooks.
CD-ROM on hda. This option changes this to more natural hda for
hard disk and hdc for CD-ROM.
-config BLK_DEV_IDEDMA_PMAC
- bool "PowerMac IDE DMA support"
- depends on BLK_DEV_IDE_PMAC
- select BLK_DEV_IDEDMA_PCI
- help
- This option allows the driver for the on-board IDE controller on
- Power Macintoshes and PowerBooks to use DMA (direct memory access)
- to transfer data to and from memory. Saying Y is safe and improves
- performance.
-
config BLK_DEV_IDE_AU1XXX
bool "IDE for AMD Alchemy Au1200"
depends on SOC_AU1200
endif
config BLK_DEV_IDEDMA
- def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
+ def_bool BLK_DEV_IDEDMA_SFF || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
endif # IDE
static void __exit ali15x3_ide_exit(void)
{
- return pci_unregister_driver(&alim15x3_pci_driver);
+ pci_unregister_driver(&alim15x3_pci_driver);
}
module_init(ali15x3_ide_init);
* IDE driver for Linux.
*
* Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz
*
* Based on the work of:
* Andre Hedrick
d.udma_mask = ATA_UDMA5;
}
+ /*
+ * It seems that on some nVidia controllers using AltStatus
+ * register can be unreliable so default to Status register
+ * if the device is in Compatibility Mode.
+ */
+ if (dev->vendor == PCI_VENDOR_ID_NVIDIA &&
+ ide_pci_is_in_compatibility_mode(dev))
+ d.host_flags |= IDE_HFLAG_BROKEN_ALTSTATUS;
+
printk(KERN_INFO "%s %s: UDMA%s controller\n",
d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
+ u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
+ mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
hw->chipset = ide_acorn;
}
-static int __init
+static int __devinit
icside_register_v5(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *base;
.swdma_mask = ATA_SWDMA2,
};
-static int __init
+static int __devinit
icside_register_v6(struct icside_state *state, struct expansion_card *ec)
{
void __iomem *ioc_base, *easi_base;
}
EXPORT_SYMBOL(ide_end_request);
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
+static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
{
struct request_pm_state *pm = rq->data;
+#ifdef DEBUG_PM
+ printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+ drive->name, pm->pm_step);
+#endif
if (drive->media != ide_disk)
return;
/* Not supported? Switch to next step now. */
if (ata_id_flush_enabled(drive->id) == 0 ||
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq, 0, 0);
+ ide_complete_power_step(drive, rq);
return ide_stopped;
}
if (ata_id_flush_ext_enabled(drive->id))
if (drive->media != ide_disk)
pm->pm_step = IDE_PM_RESTORE_DMA;
else
- ide_complete_power_step(drive, rq, 0, 0);
+ ide_complete_power_step(drive, rq);
return ide_stopped;
case IDE_PM_IDLE: /* Resume step 2 (idle) */
args->tf.command = ATA_CMD_IDLEIMMEDIATE;
}
} else if (blk_pm_request(rq)) {
struct request_pm_state *pm = rq->data;
-#ifdef DEBUG_PM
- printk("%s: complete_power_step(step: %d, stat: %x, err: %x)\n",
- drive->name, rq->pm->pm_step, stat, err);
-#endif
- ide_complete_power_step(drive, rq, stat, err);
+
+ ide_complete_power_step(drive, rq);
if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
struct request_pm_state *pm = rq->data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
- drive->name, rq->pm->pm_step);
+ drive->name, pm->pm_step);
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
ide_startstop_t startstop;
int loops = 0;
- /* for atari only: POSSIBLY BROKEN HERE(?) */
- ide_get_lock(ide_intr, hwgroup);
-
/* caller must own ide_lock */
BUG_ON(!irqs_disabled());
while (!hwgroup->busy) {
hwgroup->busy = 1;
+ /* for atari only */
+ ide_get_lock(ide_intr, hwgroup);
drive = choose_drive(hwgroup);
if (drive == NULL) {
int sleeping = 0;
if (drive->waiting_for_dma)
return hwif->dma_ops->dma_test_irq(drive);
-#if 0
- /* need to guarantee 400ns since last command was issued */
- udelay(1);
-#endif
-
/*
* We do a passive status test under shared PCI interrupts on
* cards that truly share the ATA side interrupt, but may also share
* an interrupt with another pci card/device. We make no assumptions
* about possible isa-pnp and pci-pnp issues yet.
*/
- if (hwif->io_ports.ctl_addr)
+ if (hwif->io_ports.ctl_addr &&
+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0)
stat = hwif->tp_ops->read_altstatus(hwif);
else
/* Note: this may clear a pending IRQ!! */
{ "TSSTcorp CDDVDW SH-S202N" , "SB01" },
{ "TSSTcorp CDDVDW SH-S202H" , "SB00" },
{ "TSSTcorp CDDVDW SH-S202H" , "SB01" },
+ { "SAMSUNG SP0822N" , "WA100-10" },
{ NULL , NULL }
};
/* take a deep breath */
msleep(50);
- if (io_ports->ctl_addr) {
+ if (io_ports->ctl_addr &&
+ (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
a = tp_ops->read_altstatus(hwif);
s = tp_ops->read_status(hwif);
if ((a ^ s) & ~ATA_IDX)
struct macio_dev *mdev;
u32 timings[4];
volatile u32 __iomem * *kauai_fcr;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
/* Those fields are duplicating what is in hwif. We currently
* can't use the hwif ones because of some assumptions that are
* beeing done by the generic code about the kind of dma controller
*/
volatile struct dbdma_regs __iomem * dma_regs;
struct dbdma_cmd* dma_table_cpu;
-#endif
-
} pmac_ide_hwif_t;
enum {
#define KAUAI_FCR_UATA_RESET_N 0x00000002
#define KAUAI_FCR_UATA_ENABLE 0x00000001
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/* Rounded Multiword DMA timings
*
* I gave up finding a generic formula for all controller
static void pmac_ide_selectproc(ide_drive_t *drive);
static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
-
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
pmac_ide_do_update_timings(drive);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* Calculate KeyLargo ATA/66 UDMA timings
*/
drive->name, speed & 0xf, *timings);
#endif
}
-#endif /* #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC */
static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
tl[0] = *timings;
tl[1] = *timings2;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
if (speed >= XFER_UDMA_0) {
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(&tl[0], speed);
ret = -1;
} else
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
if (ret)
return;
.chipset = ide_pmac,
.tp_ops = &pmac_tp_ops,
.port_ops = &pmac_ide_port_ops,
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
.dma_ops = &pmac_dma_ops,
-#endif
.host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_MMIO |
pmif->regbase = regbase;
pmif->irq = irq;
pmif->kauai_fcr = NULL;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
+
if (macio_resource_count(mdev) >= 2) {
if (macio_request_resource(mdev, 1, "ide-pmac (dma)"))
printk(KERN_WARNING "ide-pmac: can't request DMA "
pmif->dma_regs = ioremap(macio_resource_start(mdev, 1), 0x1000);
} else
pmif->dma_regs = NULL;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
+
dev_set_drvdata(&mdev->ofdev.dev, pmif);
memset(&hw, 0, sizeof(hw));
base = ioremap(rbase, rlen);
pmif->regbase = (unsigned long) base + 0x2000;
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
pmif->dma_regs = base + 0x1000;
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
pmif->kauai_fcr = base;
pmif->irq = pdev->irq;
return error;
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
-
/*
* pmac_ide_build_dmatable builds the DBDMA command list
* for a transfer and sets the DBDMA channel to point to it.
return 0;
}
-#else
-static int __devinit pmac_ide_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return -EOPNOTSUPP;
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
{
ide_hwif_t *hwif = drive->hwif;
ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
+ u16 *mateid;
u8 mask = hwif->ultra_mask;
if (mate == NULL)
goto out;
+ mateid = mate->id;
if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
.dma_timeout = ide_dma_timeout,
};
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
+static const struct ide_port_info sgiioc4_port_info __devinitconst = {
.name = DRV_NAME,
.chipset = ide_pci,
.init_dma = ide_dma_sgiioc4,
return ret;
}
-int
+int __devinit
ioc4_ide_attach_one(struct ioc4_driver_data *idd)
{
/* PCI-RT does not bring out IDE connection.
return pci_init_sgiioc4(idd->idd_pdev);
}
-static struct ioc4_submodule ioc4_ide_submodule = {
+static struct ioc4_submodule __devinitdata ioc4_ide_submodule = {
.is_name = "IOC4_ide",
.is_owner = THIS_MODULE,
.is_probe = ioc4_ide_attach_one,
static DEFINE_RWLOCK(addr_space_lock);
-/* addr_space list will have zero and max already included as bounds */
-static struct hpsb_address_ops dummy_ops = { NULL, NULL, NULL, NULL };
-static struct hpsb_address_serve dummy_zero_addr, dummy_max_addr;
-
static struct hl_host_info *hl_get_hostinfo(struct hpsb_highlevel *hl,
struct hpsb_host *host)
return retval;
}
+static struct hpsb_address_ops dummy_ops;
+
+/* dummy address spaces as lower and upper bounds of the host's a.s. list */
static void init_hpsb_highlevel(struct hpsb_host *host)
{
- INIT_LIST_HEAD(&dummy_zero_addr.host_list);
- INIT_LIST_HEAD(&dummy_zero_addr.hl_list);
- INIT_LIST_HEAD(&dummy_max_addr.host_list);
- INIT_LIST_HEAD(&dummy_max_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_zero_addr.hl_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.host_list);
+ INIT_LIST_HEAD(&host->dummy_max_addr.hl_list);
- dummy_zero_addr.op = dummy_max_addr.op = &dummy_ops;
+ host->dummy_zero_addr.op = host->dummy_max_addr.op = &dummy_ops;
- dummy_zero_addr.start = dummy_zero_addr.end = 0;
- dummy_max_addr.start = dummy_max_addr.end = ((u64) 1) << 48;
+ host->dummy_zero_addr.start = host->dummy_zero_addr.end = 0;
+ host->dummy_max_addr.start = host->dummy_max_addr.end = ((u64) 1) << 48;
- list_add_tail(&dummy_zero_addr.host_list, &host->addr_space);
- list_add_tail(&dummy_max_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_zero_addr.host_list, &host->addr_space);
+ list_add_tail(&host->dummy_max_addr.host_list, &host->addr_space);
}
void highlevel_add_host(struct hpsb_host *host)
#include "ieee1394_types.h"
#include "csr.h"
+#include "highlevel.h"
struct hpsb_packet;
struct hpsb_iso;
struct { DECLARE_BITMAP(map, 64); } tl_pool[ALL_NODES];
struct csr_control csr;
+
+ struct hpsb_address_serve dummy_zero_addr;
+ struct hpsb_address_serve dummy_max_addr;
};
enum devctl_cmd {
return error;
}
+#define OUI_FREECOM_TECHNOLOGIES_GMBH 0x0001db
+
static int nodemgr_get_max_rom(quadlet_t *bus_info_data, void *__ci)
{
+ /* Freecom FireWire Hard Drive firmware bug */
+ if (be32_to_cpu(bus_info_data[3]) >> 8 == OUI_FREECOM_TECHNOLOGIES_GMBH)
+ return 0;
+
return (be32_to_cpu(bus_info_data[2]) >> 8) & 0x3;
}
g = get_hpsb_generation(host);
for (i = 0; i < 4 ; i++) {
msleep_interruptible(63);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;
/* Sleep 3 seconds */
for (i = 3000/200; i; i--) {
msleep_interruptible(200);
+ try_to_freeze();
if (kthread_should_stop())
goto exit;
.model_id = 0x000021,
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
},
+ /* iPod mini */ {
+ .firmware_revision = 0x0a2700,
+ .model_id = 0x000022,
+ .workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
+ },
/* iPod mini */ {
.firmware_revision = 0x0a2700,
.model_id = 0x000023,
return;
read_lock_irqsave(&sbp2_hi_logical_units_lock, flags);
+
list_for_each_entry(lu, &hi->logical_units, lu_list)
- if (likely(atomic_read(&lu->state) !=
- SBP2LU_STATE_IN_SHUTDOWN)) {
- atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+ if (atomic_cmpxchg(&lu->state,
+ SBP2LU_STATE_RUNNING, SBP2LU_STATE_IN_RESET)
+ == SBP2LU_STATE_RUNNING)
scsi_block_requests(lu->shost);
- }
+
read_unlock_irqrestore(&sbp2_hi_logical_units_lock, flags);
}
/* struct for tracking if cqes have been reported to the application */
struct ehca_qmap_entry {
u16 app_wr_id;
- u16 reported;
+ u8 reported;
+ u8 cqe_req;
};
struct ehca_queue_map {
unsigned int entries;
unsigned int tail;
unsigned int left_to_poll;
+ unsigned int next_wqe_idx; /* Idx to first wqe to be flushed */
};
struct ehca_qp {
if (printk_timed_ratelimit(&ehca_dmem_warn_time,
30 * 1000))
ehca_gen_err("DMEM operations are not allowed"
- "as long as an ehca adapter is"
- "attached to the LPAR");
+ "in conjunction with eHCA");
return NOTIFY_BAD;
}
}
{
int i;
- qmap->tail = 0;
- for (i = 0; i < qmap->entries; i++)
+ qmap->tail = qmap->entries - 1;
+ qmap->left_to_poll = 0;
+ qmap->next_wqe_idx = 0;
+ for (i = 0; i < qmap->entries; i++) {
qmap->map[i].reported = 1;
+ qmap->map[i].cqe_req = 0;
+ }
}
/*
void *wqe_v;
u64 q_ofs;
u32 wqe_idx;
+ unsigned int tail_idx;
/* convert real to abs address */
wqe_p = wqe_p & (~(1UL << 63));
return -EFAULT;
}
+ tail_idx = (qmap->tail + 1) % qmap->entries;
wqe_idx = q_ofs / ipz_queue->qe_size;
- if (wqe_idx < qmap->tail)
- qmap->left_to_poll = (qmap->entries - qmap->tail) + wqe_idx;
- else
- qmap->left_to_poll = wqe_idx - qmap->tail;
+ /* check all processed wqes, whether a cqe is requested or not */
+ while (tail_idx != wqe_idx) {
+ if (qmap->map[tail_idx].cqe_req)
+ qmap->left_to_poll++;
+ tail_idx = (tail_idx + 1) % qmap->entries;
+ }
+ /* save index in queue, where we have to start flushing */
+ qmap->next_wqe_idx = wqe_idx;
return 0;
}
} else {
spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
my_qp->sq_map.left_to_poll = 0;
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
my_qp->rq_map.left_to_poll = 0;
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
}
qmap_entry->app_wr_id = get_app_wr_id(send_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 0;
switch (send_wr->opcode) {
case IB_WR_SEND:
if ((send_wr->send_flags & IB_SEND_SIGNALED ||
qp->init_attr.sq_sig_type == IB_SIGNAL_ALL_WR)
- && !hidden)
+ && !hidden) {
wqe_p->wr_flag |= WQE_WRFLAG_REQ_SIGNAL_COM;
+ qmap_entry->cqe_req = 1;
+ }
if (send_wr->opcode == IB_WR_SEND_WITH_IMM ||
send_wr->opcode == IB_WR_RDMA_WRITE_WITH_IMM) {
qmap_entry = &my_qp->rq_map.map[rq_map_idx];
qmap_entry->app_wr_id = get_app_wr_id(cur_recv_wr->wr_id);
qmap_entry->reported = 0;
+ qmap_entry->cqe_req = 1;
wqe_cnt++;
} /* eof for cur_recv_wr */
goto repoll;
wc->qp = &my_qp->ib_qp;
+ qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
+ if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
+ /* We got a send completion. */
+ qmap = &my_qp->sq_map;
+ else
+ /* We got a receive completion. */
+ qmap = &my_qp->rq_map;
+
+ /* advance the tail pointer */
+ qmap->tail = qmap_tail_idx;
+
if (is_error) {
/*
* set left_to_poll to 0 because in error state, we will not
* get any additional CQEs
*/
- ehca_add_to_err_list(my_qp, 1);
+ my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
+ my_qp->sq_map.entries;
my_qp->sq_map.left_to_poll = 0;
+ ehca_add_to_err_list(my_qp, 1);
+ my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
+ my_qp->rq_map.entries;
+ my_qp->rq_map.left_to_poll = 0;
if (HAS_RQ(my_qp))
ehca_add_to_err_list(my_qp, 0);
- my_qp->rq_map.left_to_poll = 0;
}
- qmap_tail_idx = get_app_wr_id(cqe->work_request_id);
- if (!(cqe->w_completion_flags & WC_SEND_RECEIVE_BIT))
- /* We got a send completion. */
- qmap = &my_qp->sq_map;
- else
- /* We got a receive completion. */
- qmap = &my_qp->rq_map;
-
qmap_entry = &qmap->map[qmap_tail_idx];
if (qmap_entry->reported) {
ehca_warn(cq->device, "Double cqe on qp_num=%#x",
wc->wr_id = replace_wr_id(cqe->work_request_id, qmap_entry->app_wr_id);
qmap_entry->reported = 1;
- /* this is a proper completion, we need to advance the tail pointer */
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
-
/* if left_to_poll is decremented to 0, add the QP to the error list */
if (qmap->left_to_poll > 0) {
qmap->left_to_poll--;
else
qmap = &my_qp->rq_map;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
while ((nr < num_entries) && (qmap_entry->reported == 0)) {
/* generate flush CQE */
+
memset(wc, 0, sizeof(*wc));
- offset = qmap->tail * ipz_queue->qe_size;
+ offset = qmap->next_wqe_idx * ipz_queue->qe_size;
wqe = (struct ehca_wqe *)ipz_qeit_calc(ipz_queue, offset);
if (!wqe) {
ehca_err(cq->device, "Invalid wqe offset=%#lx on "
wc->qp = &my_qp->ib_qp;
- /* mark as reported and advance tail pointer */
+ /* mark as reported and advance next_wqe pointer */
qmap_entry->reported = 1;
- if (++qmap->tail == qmap->entries)
- qmap->tail = 0;
- qmap_entry = &qmap->map[qmap->tail];
+ qmap->next_wqe_idx++;
+ if (qmap->next_wqe_idx == qmap->entries)
+ qmap->next_wqe_idx = 0;
+ qmap_entry = &qmap->map[qmap->next_wqe_idx];
wc++; nr++;
}
{
struct mlx4_ib_dev *dev = to_mdev(ibcq->device);
struct mlx4_ib_cq *cq = to_mcq(ibcq);
+ struct mlx4_mtt mtt;
int outst_cqe;
int err;
goto out;
}
+ mtt = cq->buf.mtt;
+
err = mlx4_cq_resize(dev->dev, &cq->mcq, entries, &cq->resize_buf->buf.mtt);
if (err)
goto err_buf;
+ mlx4_mtt_cleanup(dev->dev, &mtt);
if (ibcq->uobject) {
cq->buf = cq->resize_buf->buf;
cq->ibcq.cqe = cq->resize_buf->cqe;
goto out;
err_buf:
+ mlx4_mtt_cleanup(dev->dev, &cq->resize_buf->buf.mtt);
if (!ibcq->uobject)
mlx4_ib_free_cq_buf(dev, &cq->resize_buf->buf,
cq->resize_buf->cqe);
{
struct ml_device *ml = dev->ff->private;
struct ml_effect_state *state = &ml->states[effect_id];
+ unsigned long flags;
- spin_lock_bh(&ml->timer_lock);
+ spin_lock_irqsave(&ml->timer_lock, flags);
if (value > 0) {
debug("initiated play");
ml_play_effects(ml);
}
- spin_unlock_bh(&ml->timer_lock);
+ spin_unlock_irqrestore(&ml->timer_lock, flags);
return 0;
}
atkbd_disable(atkbd);
/* make sure we don't have a command in flight */
- flush_scheduled_work();
+ cancel_delayed_work_sync(&atkbd->event_work);
sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
input_unregister_device(atkbd->dev);
atkbd->force_release_mask);
}
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+ const unsigned int forced_release_keys[] = {
+ 0xae, 0xb0,
+ };
+ int i;
+
+ if (atkbd->set == 2)
+ for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+ __set_bit(forced_release_keys[i],
+ atkbd->force_release_mask);
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_fixup,
.driver_data = atkbd_hp_keymap_fixup,
},
+ {
+ .ident = "Inventec Symphony",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+ },
+ .callback = atkbd_setup_fixup,
+ .driver_data = atkbd_inventec_keymap_fixup,
+ },
{ }
};
static char *phone = "kip1000";
module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
enum {
/* HID Registers */
}
}
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+ switch (scancode) { /* phone key: */
+ case 0x82: return KEY_NUMERIC_0; /* 0 */
+ case 0x11: return KEY_NUMERIC_1; /* 1 */
+ case 0x12: return KEY_NUMERIC_2; /* 2 */
+ case 0x14: return KEY_NUMERIC_3; /* 3 */
+ case 0x21: return KEY_NUMERIC_4; /* 4 */
+ case 0x22: return KEY_NUMERIC_5; /* 5 */
+ case 0x24: return KEY_NUMERIC_6; /* 6 */
+ case 0x41: return KEY_NUMERIC_7; /* 7 */
+ case 0x42: return KEY_NUMERIC_8; /* 8 */
+ case 0x44: return KEY_NUMERIC_9; /* 9 */
+ case 0x84: return KEY_NUMERIC_POUND; /* # */
+ case 0x81: return KEY_NUMERIC_STAR; /* * */
+ case 0x18: return KEY_ENTER; /* pickup */
+ case 0x28: return KEY_ESC; /* hangup */
+ case 0x48: return KEY_LEFT; /* left arrow */
+ case 0x88: return KEY_RIGHT; /* right arrow */
+ default: return special_keymap(scancode);
+ }
+}
+
static unsigned short (*keymap)(int) = keymap_kip1000;
/*
keymap = keymap_usbph01;
printk(KERN_INFO KBUILD_MODNAME ": "
"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+ } else if (!strcasecmp(phone, "atcom")) {
+ keymap = keymap_atcom;
+ printk(KERN_INFO KBUILD_MODNAME ": "
+ "Keymap for ATCom AU-100 phone loaded\n");
} else {
printk(KERN_ERR KBUILD_MODNAME ": "
"Unsupported phone: %s\n", phone);
*/
static int hgpk_validate_byte(unsigned char *packet)
{
- return (packet[0] & 0x0C) == 0x08;
+ return (packet[0] & 0x0C) != 0x08;
}
static void hgpk_process_packet(struct psmouse *psmouse)
DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
},
},
+ {
+ .ident = "Dell XPS M1530",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ .ident = "Compal HEL80I",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
{ }
};
* - Support Intuos3 4x6
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ * v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
struct usb_device *usbdev;
struct usb_interface *intf;
struct urb *irq;
- struct wacom_wac * wacom_wac;
+ struct wacom_wac *wacom_wac;
struct mutex lock;
unsigned int open:1;
char phys[32];
};
struct wacom_combo {
- struct wacom * wacom;
- struct urb * urb;
+ struct wacom *wacom;
+ struct urb *urb;
};
extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
#endif
#include "wacom.h"
#include "wacom_wac.h"
+/* defines to get HID report descriptor */
+#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
+#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
+#define HID_USAGE_UNDEFINED 0x00
+#define HID_USAGE_PAGE 0x05
+#define HID_USAGE_PAGE_DIGITIZER 0x0d
+#define HID_USAGE_PAGE_DESKTOP 0x01
+#define HID_USAGE 0x09
+#define HID_USAGE_X 0x30
+#define HID_USAGE_Y 0x31
+#define HID_USAGE_X_TILT 0x3d
+#define HID_USAGE_Y_TILT 0x3e
+#define HID_USAGE_FINGER 0x22
+#define HID_USAGE_STYLUS 0x20
+#define HID_COLLECTION 0xc0
+
+enum {
+ WCM_UNDEFINED = 0,
+ WCM_DESKTOP,
+ WCM_DIGITIZER,
+};
+
+struct hid_descriptor {
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
+#define WAC_HID_FEATURE_REPORT 0x03
static int usb_get_report(struct usb_interface *intf, unsigned char type,
unsigned char id, void *buf, int size)
void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
{
input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
- return;
}
void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
{
input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
- return;
}
void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
{
input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
- return;
}
void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
{
input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
- return;
}
__u16 wacom_be16_to_cpu(unsigned char *data)
void wacom_input_sync(void *wcombo)
{
input_sync(get_input_dev((struct wacom_combo *)wcombo));
- return;
}
static int wacom_open(struct input_dev *dev)
void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_1) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_1) |
BIT_MASK(BTN_5);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
}
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_4);
}
{
input_dev->evbit[0] |= BIT_MASK(EV_REL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_4) |
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) |
BIT_MASK(BTN_5) | BIT_MASK(BTN_6) | BIT_MASK(BTN_7);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
}
void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
+ input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_8) | BIT_MASK(BTN_9);
}
void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->evbit[0] |= BIT_MASK(EV_MSC) | BIT_MASK(EV_REL);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
- input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) |
+ input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
- input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2) |
- BIT_MASK(BTN_TOOL_RUBBER);
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
+static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
+ struct wacom_wac *wacom_wac)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct wacom_features *features = wacom_wac->features;
+ char limit = 0, result = 0;
+ int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
+ unsigned char *report;
+
+ report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+ if (!report)
+ return -ENOMEM;
+
+ /* retrive report descriptors */
+ do {
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ HID_DEVICET_REPORT << 8,
+ intf->altsetting[0].desc.bInterfaceNumber, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+ } while (result < 0 && limit++ < 5);
+
+ if (result < 0)
+ goto out;
+
+ for (i = 0; i < hid_desc->wDescriptorLength; i++) {
+
+ switch (report[i]) {
+ case HID_USAGE_PAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_PAGE_DIGITIZER:
+ usage = WCM_DIGITIZER;
+ i++;
+ break;
+
+ case HID_USAGE_PAGE_DESKTOP:
+ usage = WCM_DESKTOP;
+ i++;
+ break;
+ }
+ break;
+
+ case HID_USAGE:
+ switch (report[i + 1]) {
+ case HID_USAGE_X:
+ if (usage == WCM_DESKTOP) {
+ if (finger) {
+ features->touch_x_max =
+ features->touch_y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 6]);
+ i += 7;
+ } else if (pen) {
+ features->x_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ }
+ } else if (usage == WCM_DIGITIZER) {
+ /* max pressure isn't reported
+ features->pressure_max = (unsigned short)
+ (report[i+4] << 8 | report[i + 3]);
+ */
+ features->pressure_max = 255;
+ i += 4;
+ }
+ break;
+
+ case HID_USAGE_Y:
+ if (usage == WCM_DESKTOP)
+ features->y_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+
+ case HID_USAGE_FINGER:
+ finger = 1;
+ i++;
+ break;
+
+ case HID_USAGE_STYLUS:
+ pen = 1;
+ i++;
+ break;
+
+ case HID_USAGE_UNDEFINED:
+ if (usage == WCM_DESKTOP && finger) /* capacity */
+ features->pressure_max =
+ wacom_le16_to_cpu(&report[i + 3]);
+ i += 4;
+ break;
+ }
+ break;
+
+ case HID_COLLECTION:
+ /* reset UsagePage ans Finger */
+ finger = usage = 0;
+ break;
+ }
+ }
+
+ result = 0;
+
+ out:
+ kfree(report);
+ return result;
+}
+
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
+ struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
+ struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
char rep_data[2], limit = 0;
+ struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
- wacom_wac->features = get_wacom_feature(id);
- BUG_ON(wacom_wac->features->pktlen > 10);
+ wacom_wac->features = features = get_wacom_feature(id);
+ BUG_ON(features->pktlen > 10);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+ /* TabletPC need to retrieve the physical and logical maximum from report descriptor */
+ if (wacom_wac->features->type == TABLETPC) {
+ if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
+ if (usb_get_extra_descriptor(&interface->endpoint[0],
+ HID_DEVICET_REPORT, &hid_desc)) {
+ printk("wacom: can not retrive extra class descriptor\n");
+ goto fail2;
+ }
+ }
+ error = wacom_parse_hid(intf, hid_desc, wacom_wac);
+ if (error)
+ goto fail2;
+ }
+
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
- input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
- input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
- input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
+ if (features->type == TABLETPC) {
+ input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
+ input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
+ input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
+ }
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
- endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
if (error)
goto fail3;
- /* Ask the tablet to report tablet data. Repeat until it succeeds */
- do {
- rep_data[0] = 2;
- rep_data[1] = 2;
- usb_set_report(intf, 3, 2, rep_data, 2);
- usb_get_report(intf, 3, 2, rep_data, 2);
- } while (rep_data[1] != 2 && limit++ < 5);
+ /*
+ * Ask the tablet to report tablet data if it is not a Tablet PC.
+ * Repeat until it succeeds
+ */
+ if (wacom_wac->features->type != TABLETPC) {
+ do {
+ rep_data[0] = 2;
+ rep_data[1] = 2;
+ error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
+ 2, rep_data, 2);
+ if (error >= 0)
+ error = usb_get_report(intf,
+ WAC_HID_FEATURE_REPORT, 2,
+ rep_data, 2);
+ } while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
+ }
usb_set_intfdata(intf, wacom);
return 0;
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
- usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+ usb_buffer_free(interface_to_usbdev(intf), 10,
+ wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
}
return 1;
}
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+ char *data = wacom->data;
+ int prox = 0, pressure;
+ static int stylusInProx, touchInProx = 1, touchOut;
+ struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+ dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+ if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+ if (urb->actual_length == 5) { /* with touch */
+ prox = data[0] & 0x03;
+ } else { /* with capacity */
+ prox = data[1] & 0x03;
+ }
+
+ if (!stylusInProx) { /* stylus not in prox */
+ if (prox) {
+ if (touchInProx) {
+ wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+ wacom->id[0] = TOUCH_DEVICE_ID;
+ if (urb->actual_length != 5) {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+ wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+ } else {
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+ wacom_report_key(wcombo, BTN_TOUCH, 1);
+ }
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ touchOut = 1;
+ return 1;
+ }
+ } else {
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (touchOut || !prox) { /* force touch out-prox */
+ wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ touchOut = 0;
+ touchInProx = 1;
+ return 1;
+ }
+ } else if (data[0] == 2) { /* Penabled */
+ prox = data[1] & 0x20;
+
+ touchInProx = 0;
+
+ wacom->id[0] = ERASER_DEVICE_ID;
+
+ /*
+ * if going from out of proximity into proximity select between the eraser
+ * and the pen based on the state of the stylus2 button, choose eraser if
+ * pressed else choose pen. if not a proximity change from out to in, send
+ * an out of proximity for previous tool then a in for new tool.
+ */
+ if (prox) { /* in prox */
+ if (!wacom->tool[0]) {
+ /* Going into proximity select tool */
+ wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+ if (wacom->tool[1] == BTN_TOOL_PEN)
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ } else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+ /*
+ * was entered with stylus2 pressed
+ * report out proximity for previous tool
+ */
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ wacom_report_key(wcombo, wacom->tool[1], 0);
+ wacom_input_sync(wcombo);
+
+ /* set new tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ return 0;
+ }
+ if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+ /* Unknown tool selected default to pen tool */
+ wacom->tool[1] = BTN_TOOL_PEN;
+ wacom->id[0] = STYLUS_DEVICE_ID;
+ }
+ wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+ wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+ wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+ wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+ pressure = ((data[7] & 0x01) << 8) | data[6];
+ if (pressure < 0)
+ pressure = wacom->features->pressure_max + pressure + 1;
+ wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+ wacom_report_key(wcombo, BTN_TOUCH, pressure);
+ } else {
+ wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+ wacom_report_key(wcombo, BTN_STYLUS, 0);
+ wacom_report_key(wcombo, BTN_STYLUS2, 0);
+ wacom_report_key(wcombo, BTN_TOUCH, 0);
+ }
+ wacom_report_key(wcombo, wacom->tool[1], prox);
+ wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+ stylusInProx = prox;
+ wacom->tool[0] = prox;
+ return 1;
+ }
+ return 0;
+}
+
int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
{
switch (wacom_wac->features->type) {
case PENPARTNER:
- return (wacom_penpartner_irq(wacom_wac, wcombo));
- break;
+ return wacom_penpartner_irq(wacom_wac, wcombo);
+
case PL:
- return (wacom_pl_irq(wacom_wac, wcombo));
- break;
+ return wacom_pl_irq(wacom_wac, wcombo);
+
case WACOM_G4:
case GRAPHIRE:
case WACOM_MO:
- return (wacom_graphire_irq(wacom_wac, wcombo));
- break;
+ return wacom_graphire_irq(wacom_wac, wcombo);
+
case PTU:
- return (wacom_ptu_irq(wacom_wac, wcombo));
- break;
+ return wacom_ptu_irq(wacom_wac, wcombo);
+
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case CINTIQ:
case WACOM_BEE:
- return (wacom_intuos_irq(wacom_wac, wcombo));
- break;
+ return wacom_intuos_irq(wacom_wac, wcombo);
+
+ case TABLETPC:
+ return wacom_tpc_irq(wacom_wac, wcombo);
+
default:
return 0;
}
/* fall through */
case INTUOS3S:
input_dev_i3s(input_dev, wacom_wac);
+ /* fall through */
case INTUOS:
input_dev_i(input_dev, wacom_wac);
break;
case PL:
case PTU:
+ case TABLETPC:
input_dev_pl(input_dev, wacom_wac);
- break;
+ /* fall through */
case PENPARTNER:
input_dev_pt(input_dev, wacom_wac);
break;
{ "Wacom Graphire4 6x8", 8, 16704, 12064, 511, 63, WACOM_G4 },
{ "Wacom BambooFun 4x5", 9, 14760, 9225, 511, 63, WACOM_MO },
{ "Wacom BambooFun 6x8", 9, 21648, 13530, 511, 63, WACOM_MO },
+ { "Wacom Bamboo1 Medium",8, 16704, 12064, 511, 63, GRAPHIRE },
{ "Wacom Volito", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom PenStation2", 8, 3250, 2320, 255, 63, GRAPHIRE },
{ "Wacom Volito2 4x5", 8, 5104, 3712, 511, 63, GRAPHIRE },
{ "Wacom Cintiq 21UX", 10, 87200, 65600, 1023, 63, CINTIQ },
{ "Wacom Cintiq 20WSX", 10, 86680, 54180, 1023, 63, WACOM_BEE },
{ "Wacom Cintiq 12WX", 10, 53020, 33440, 1023, 63, WACOM_BEE },
+ { "Wacom DTU1931", 8, 37832, 30305, 511, 0, PL },
+ { "Wacom ISDv4 90", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 93", 8, 26202, 16325, 255, 0, TABLETPC },
+ { "Wacom ISDv4 9A", 8, 26202, 16325, 255, 0, TABLETPC },
{ "Wacom Intuos2 6x8", 10, 20320, 16240, 1023, 31, INTUOS },
{ }
};
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+ { USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
{ }
};
-const struct usb_device_id * get_device_table(void) {
- const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+ const struct usb_device_id *id_table = wacom_ids;
+
return id_table;
}
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
int index = id - wacom_ids;
struct wacom_features *wf = &wacom_features[index];
+
return wf;
}
#define WACOM_WAC_H
#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
CINTIQ,
WACOM_BEE,
WACOM_MO,
+ TABLETPC,
MAX_TYPE
};
int pressure_max;
int distance_max;
int type;
+ int touch_x_max;
+ int touch_y_max;
};
struct wacom_wac {
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
- "features: %x02x, controller: 0x%02x\n",
+ "features: 0x%02x, controller: 0x%02x\n",
elo_types[(packet[1] -'0') & 0x03],
packet[5], packet[4], packet[3], packet[7]);
{ "" }
};
-static struct xenbus_driver xenkbd = {
+static struct xenbus_driver xenkbd_driver = {
.name = "vkbd",
.owner = THIS_MODULE,
.ids = xenkbd_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenkbd);
+ return xenbus_register_frontend(&xenkbd_driver);
}
static void __exit xenkbd_cleanup(void)
{
- xenbus_unregister_driver(&xenkbd);
+ xenbus_unregister_driver(&xenkbd_driver);
}
module_init(xenkbd_init);
int i;
for (i = 0; i < MAX_CARDS; i++) {
- if (!io[i])
- break;
-
- b1isa_remove(&isa_dev[i]);
+ if (isa_dev[i].resource[0].start)
+ b1isa_remove(&isa_dev[i]);
}
unregister_capi_driver(&capi_driver_b1isa);
}
memcpy(&cards[i], &cards[i + 1], sizeof(cards[i]));
}
-static int HiSax_inithardware(int *busy_flag)
+static int __init HiSax_inithardware(int *busy_flag)
{
int foundcards = 0;
int i = 0;
printk(KERN_INFO "HiSax module removed\n");
}
-int hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
+#ifdef CONFIG_HOTPLUG
+
+int __devinit hisax_init_pcmcia(void *pcm_iob, int *busy_flag, struct IsdnCard *card)
{
u_char ids[16];
int ret = -1;
}
EXPORT_SYMBOL(hisax_init_pcmcia);
+#endif
+
EXPORT_SYMBOL(HiSax_closecard);
#include "hisax_if.h"
static void hisax_bh(struct work_struct *work);
static void EChannel_proc_rcv(struct hisax_d_if *d_if);
+static int hisax_setup_card_dynamic(struct IsdnCard *card)
+{
+ return 2;
+}
+
int hisax_register(struct hisax_d_if *hisax_d_if, struct hisax_b_if *b_if[],
char *name, int protocol)
{
cards[i].protocol = protocol;
sprintf(id, "%s%d", name, i);
nrcards++;
- retval = checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
+ retval = checkcard(i, id, NULL, hisax_d_if->owner,
+ hisax_setup_card_dynamic);
if (retval == 0) { // yuck
cards[i].typ = 0;
nrcards--;
/* Fill in the MAC-level header (if not already set) */
if (!card->mac_addr[0]) {
- for (i = 0; i < ETH_ALEN - sizeof(unsigned long); i++)
+ for (i = 0; i < ETH_ALEN; i++)
dev->dev_addr[i] = 0xfc;
if ((in_dev = dev->ip_ptr) != NULL) {
struct in_ifaddr *ifa = in_dev->ifa_list;
if (ifa != NULL)
- memcpy(dev->dev_addr + (ETH_ALEN - sizeof(unsigned long)), &ifa->ifa_local, sizeof(unsigned long));
+ memcpy(dev->dev_addr + (ETH_ALEN - sizeof(ifa->ifa_local)), &ifa->ifa_local, sizeof(ifa->ifa_local));
}
} else
memcpy(dev->dev_addr, card->mac_addr, ETH_ALEN);
cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
}
-static int rackmeter_setup(struct rackmeter *rm)
+static int __devinit rackmeter_setup(struct rackmeter *rm)
{
pr_debug("rackmeter: setting up i2s..\n");
rackmeter_setup_i2s(rm);
{ }
};
-static struct macio_driver rackmeter_drv = {
+static struct macio_driver rackmeter_driver = {
.name = "rackmeter",
.owner = THIS_MODULE,
.match_table = rackmeter_match,
.probe = rackmeter_probe,
- .remove = rackmeter_remove,
+ .remove = __devexit_p(rackmeter_remove),
.shutdown = rackmeter_shutdown,
};
{
pr_debug("rackmeter_init()\n");
- return macio_register_driver(&rackmeter_drv);
+ return macio_register_driver(&rackmeter_driver);
}
static void __exit rackmeter_exit(void)
{
pr_debug("rackmeter_exit()\n");
- macio_unregister_driver(&rackmeter_drv);
+ macio_unregister_driver(&rackmeter_driver);
}
module_init(rackmeter_init);
*/
/* IO operations when bitmap is stored near all superblocks */
-static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long index)
+static struct page *read_sb_page(mddev_t *mddev, long offset,
+ struct page *page,
+ unsigned long index, int size)
{
/* choose a good rdev and read the page from there */
mdk_rdev_t *rdev;
struct list_head *tmp;
- struct page *page = alloc_page(GFP_KERNEL);
sector_t target;
+ if (!page)
+ page = alloc_page(GFP_KERNEL);
if (!page)
return ERR_PTR(-ENOMEM);
target = rdev->sb_start + offset + index * (PAGE_SIZE/512);
- if (sync_page_io(rdev->bdev, target, PAGE_SIZE, page, READ)) {
+ if (sync_page_io(rdev->bdev, target,
+ roundup(size, bdev_hardsect_size(rdev->bdev)),
+ page, READ)) {
page->index = index;
attach_page_buffers(page, NULL); /* so that free_buffer will
* quietly no-op */
bitmap->sb_page = read_page(bitmap->file, 0, bitmap, bytes);
} else {
- bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset, 0);
+ bitmap->sb_page = read_sb_page(bitmap->mddev, bitmap->offset,
+ NULL,
+ 0, sizeof(bitmap_super_t));
}
if (IS_ERR(bitmap->sb_page)) {
err = PTR_ERR(bitmap->sb_page);
*/
page = bitmap->sb_page;
offset = sizeof(bitmap_super_t);
+ read_sb_page(bitmap->mddev, bitmap->offset,
+ page,
+ index, count);
} else if (file) {
page = read_page(file, index, bitmap, count);
offset = 0;
} else {
- page = read_sb_page(bitmap->mddev, bitmap->offset, index);
+ page = read_sb_page(bitmap->mddev, bitmap->offset,
+ NULL,
+ index, count);
offset = 0;
}
if (IS_ERR(page)) { /* read error */
if (!rs->max_segment_size)
rs->max_segment_size = MAX_SEGMENT_SIZE;
if (!rs->seg_boundary_mask)
- rs->seg_boundary_mask = -1;
+ rs->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
if (!rs->bounce_pfn)
rs->bounce_pfn = -1;
}
select DVB_STV0297 if !DVB_FE_CUSTOMISE
select DVB_BCM3510 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1420 if !DVB_FE_CUSTOMISE
select DVB_TUNER_ITD1000 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for the digital TV receiver chip made by B2C2 Inc. included in
Technisats PCI cards and USB boxes.
}
/* try the cable dvb (stv0297) */
+ fc->fc_i2c_adap[0].no_base_addr = 1;
fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, i2c);
if (fc->fe != NULL) {
fc->dev_type = FC_CABLE;
fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
goto fe_found;
}
+ fc->fc_i2c_adap[0].no_base_addr = 0;
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
fc->fe = dvb_attach(mt312_attach,
int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */
ret;
- r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
ret = flexcop_i2c_operation(i2c->fc, &r100);
+ if (ret != 0) {
+ deb_i2c("Retrying operation\n");
+ r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr;
+ ret = flexcop_i2c_operation(i2c->fc, &r100);
+ }
if (ret != 0) {
deb_i2c("read failed. %d\n", ret);
return ret;
select DVB_OR51211 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
help
Support for PCI cards based on the Bt8xx PCI bridge. Examples are
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards,
pci_free_consistent(dm1105dvb->pdev, 6*DM1105_DMA_BYTES, dm1105dvb->ts_buf, dm1105dvb->dma_addr);
}
-static void __devinit dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
+static void dm1105dvb_enable_irqs(struct dm1105dvb *dm1105dvb)
{
outb(INTMAK_ALLMASK, dm_io_mem(DM1105_INTMAK));
outb(1, dm_io_mem(DM1105_CR));
if (fe->ops.set_voltage)
fe->ops.set_voltage(fe, SEC_VOLTAGE_OFF);
if (fe->ops.tuner_ops.sleep) {
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
fe->ops.tuner_ops.sleep(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
int is_legacy_delivery_system(fe_delivery_system_t s)
{
if((s == SYS_UNDEFINED) || (s == SYS_DVBC_ANNEX_AC) ||
- (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS))
+ (s == SYS_DVBC_ANNEX_B) || (s == SYS_DVBT) || (s == SYS_DVBS) ||
+ (s == SYS_ATSC))
return 1;
return 0;
tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MB
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0 DVB-T receivers based on reference designs made by
DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
select DVB_DIB7000M
select DVB_DIB3000MC
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
select DVB_TUNER_DIB0070
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
help
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
USB bridge is also present in devices having the DiB7700 DVB-T-USB
depends on DVB_USB
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Conexant USB2.0 hybrid reference design.
Currently, only DVB and ATSC modes are supported, analog mode
tristate "Uli m920x DVB-T USB2.0 support"
depends on DVB_USB
select DVB_MT352 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
Currently, only devices with a product id of
tristate "Genesys Logic GL861 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0
receiver with USB ID 0db0:5581.
tristate "Alcor Micro AU6610 USB2.0 support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver.
tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
depends on DVB_USB
select DVB_DIB3000MC
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
select DVB_PLL if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
config DVB_USB_AF9005
tristate "Afatech AF9005 DVB-T USB1.1 support"
depends on DVB_USB && EXPERIMENTAL
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver
and the TerraTec Cinergy T USB XE (Rev.1)
tristate "AME DTV-5100 USB2.0 DVB-T support"
depends on DVB_USB
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
depends on DVB_USB && EXPERIMENTAL
select DVB_AF9013
select DVB_PLL if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_QT1010 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
help
Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver
goto error;
}
- /* firmware is running, reconnect device in the usb bus */
- req.cmd = RECONNECT_USB;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- err("reconnect failed: %d", ret);
-
error:
return ret;
}
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
.usb_ctrl = DEVICE_SPECIFIC,
.download_firmware = af9015_download_firmware,
.firmware = "dvb-usb-af9015.fw",
+ .no_reconnect = 1,
.size_of_priv = sizeof(struct af9015_state), \
#define REQUEST_I2C_READ 0x2
#define REQUEST_I2C_WRITE 0x3
-#define REQUEST_POLL_RC 0x4
+#define REQUEST_POLL_RC 0x4 /* deprecated in firmware v1.20 */
#define REQUEST_JUMPRAM 0x8
#define REQUEST_SET_CLOCK 0xB
#define REQUEST_SET_GPIO 0xC
u16 mt2060_if1[2];
u8 rc_toggle;
u8 rc_counter;
+ u8 rc_func_version;
u8 is_dib7000pc;
u8 fw_use_new_i2c_api;
u8 disable_streaming_master_mode;
};
+extern int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype);
extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
+ u32 *romversion, u32 *ramversion, u32 *fwtype)
+{
+ u8 b[16];
+ int ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ REQUEST_GET_VERSION,
+ USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
+ b, sizeof(b), USB_CTRL_GET_TIMEOUT);
+ *hwversion = (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
+ *romversion = (b[4] << 24) | (b[5] << 16) | (b[6] << 8) | b[7];
+ *ramversion = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
+ *fwtype = (b[12] << 24) | (b[13] << 16) | (b[14] << 8) | b[15];
+ return ret;
+}
+
/* expecting rx buffer: request data[0] data[1] ... data[2] */
static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
{
}
};
+
static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
.band_caps = BAND_VHF | BAND_UHF,
.setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
== NULL ? -ENODEV : 0;
}
-#define DEFAULT_RC_INTERVAL 150
+#define DEFAULT_RC_INTERVAL 50
static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
/* Number of keypresses to ignore before start repeating */
-#define RC_REPEAT_DELAY 2
+#define RC_REPEAT_DELAY 6
+#define RC_REPEAT_DELAY_V1_20 10
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+
+
+/* Used by firmware versions < 1.20 (deprecated) */
+static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
+ int *state)
{
u8 key[4];
int i;
return 0;
}
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+ u8 report_id;
+ u8 data_state;
+ u8 system_msb;
+ u8 system_lsb;
+ u8 data;
+ u8 not_data;
+};
+
+/* This supports the new IR response format for firmware v1.20 */
+static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
+ int *state)
+{
+ struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+ struct dib0700_state *st = d->priv;
+ struct dib0700_rc_response poll_reply;
+ u8 buf[6];
+ int i;
+ int status;
+ int actlen;
+ int found = 0;
+
+ /* Set initial results in case we exit the function early */
+ *event = 0;
+ *state = REMOTE_NO_KEY_PRESSED;
+
+ /* Firmware v1.20 provides RC data via bulk endpoint 1 */
+ status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
+ sizeof(buf), &actlen, 50);
+ if (status < 0) {
+ /* No data available (meaning no key press) */
+ return 0;
+ }
+
+ if (actlen != sizeof(buf)) {
+ /* We didn't get back the 6 byte message we expected */
+ err("Unexpected RC response size [%d]", actlen);
+ return -1;
+ }
+
+ poll_reply.report_id = buf[0];
+ poll_reply.data_state = buf[1];
+ poll_reply.system_msb = buf[2];
+ poll_reply.system_lsb = buf[3];
+ poll_reply.data = buf[4];
+ poll_reply.not_data = buf[5];
+
+ /*
+ info("rid=%02x ds=%02x sm=%02x sl=%02x d=%02x nd=%02x\n",
+ poll_reply.report_id, poll_reply.data_state,
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ */
+
+ if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+ /* Key failed integrity check */
+ err("key failed integrity check: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ return -1;
+ }
+
+ /* Find the key in the map */
+ for (i = 0; i < d->props.rc_key_map_size; i++) {
+ if (keymap[i].custom == poll_reply.system_lsb &&
+ keymap[i].data == poll_reply.data) {
+ *event = keymap[i].event;
+ found = 1;
+ break;
+ }
+ }
+
+ if (found == 0) {
+ err("Unknown remote controller key: %02x %02x %02x %02x",
+ poll_reply.system_msb, poll_reply.system_lsb,
+ poll_reply.data, poll_reply.not_data);
+ d->last_event = 0;
+ return 0;
+ }
+
+ if (poll_reply.data_state == 1) {
+ /* New key hit */
+ st->rc_counter = 0;
+ *event = keymap[i].event;
+ *state = REMOTE_KEY_PRESSED;
+ d->last_event = keymap[i].event;
+ } else if (poll_reply.data_state == 2) {
+ /* Key repeated */
+ st->rc_counter++;
+
+ /* prevents unwanted double hits */
+ if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+ *event = d->last_event;
+ *state = REMOTE_KEY_PRESSED;
+ st->rc_counter = RC_REPEAT_DELAY_V1_20;
+ }
+ } else {
+ err("Unknown data state [%d]", poll_reply.data_state);
+ }
+
+ return 0;
+}
+
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+ struct dib0700_state *st = d->priv;
+
+ /* Because some people may have improperly named firmware files,
+ let's figure out whether to use the new firmware call or the legacy
+ call based on the firmware version embedded in the file */
+ if (st->rc_func_version == 0) {
+ u32 hwver, romver, ramver, fwtype;
+ int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
+ &fwtype);
+ if (ret < 0) {
+ err("Could not determine version info");
+ return -1;
+ }
+ if (ramver < 0x10200)
+ st->rc_func_version = 1;
+ else
+ st->rc_func_version = 2;
+ }
+
+ if (st->rc_func_version == 2)
+ return dib0700_rc_query_v1_20(d, event, state);
+ else
+ return dib0700_rc_query_legacy(d, event, state);
+}
+
static struct dvb_usb_rc_key dib0700_rc_keys[] = {
/* Key codes for the tiny Pinnacle remote*/
{ 0x07, 0x00, KEY_MUTE },
static int usb_bulk_urb_init(struct usb_data_stream *stream)
{
- int i;
+ int i, j;
if ((i = usb_allocate_stream_buffers(stream,stream->props.count,
stream->props.u.bulk.buffersize)) < 0)
/* allocate the URBs */
for (i = 0; i < stream->props.count; i++) {
- if ((stream->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL)
+ stream->urb_list[i] = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!.\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
-
+ }
usb_fill_bulk_urb( stream->urb_list[i], stream->udev,
usb_rcvbulkpipe(stream->udev,stream->props.endpoint),
stream->buf_list[i],
for (i = 0; i < stream->props.count; i++) {
struct urb *urb;
int frame_offset = 0;
- if ((stream->urb_list[i] =
- usb_alloc_urb(stream->props.u.isoc.framesperurb,GFP_ATOMIC)) == NULL)
+
+ stream->urb_list[i] = usb_alloc_urb(stream->props.u.isoc.framesperurb, GFP_ATOMIC);
+ if (!stream->urb_list[i]) {
+ deb_mem("not enough memory for urb_alloc_urb!\n");
+ for (j = 0; j < i; j++)
+ usb_free_urb(stream->urb_list[i]);
return -ENOMEM;
+ }
urb = stream->urb_list[i];
[SMS1XXX_BOARD_HAUPPAUGE_WINDHAM] = {
.name = "Hauppauge WinTV MiniStick",
.type = SMS_NOVA_B0,
- .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-01.fw",
+ .fw[DEVICE_MODE_DVBT_BDA] = "sms1xxx-hcw-55xxx-dvbt-02.fw",
},
};
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
select DVB_LNBP21 if !DVB_FE_CUSTOMISE
select DVB_TDA10023 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
select VIDEO_IR
help
Support for simple SAA7146 based DVB cards
ISO_BUF_COUNT,
&ttusb->iso_dma_handle);
+ if (!ttusb->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(ttusb->iso_buffer, 0,
ISO_FRAME_SIZE * FRAMES_PER_ISO_BUF * ISO_BUF_COUNT);
ttusb_setup_interfaces(ttusb);
- ttusb_alloc_iso_urbs(ttusb);
+ result = ttusb_alloc_iso_urbs(ttusb);
+ if (result < 0) {
+ dprintk("%s: ttusb_alloc_iso_urbs - failed\n", __func__);
+ mutex_unlock(&ttusb->semi2c);
+ kfree(ttusb);
+ return result;
+ }
+
if (ttusb_init_controller(ttusb))
printk("ttusb_init_controller: error\n");
ISO_BUF_COUNT),
&dec->iso_dma_handle);
+ if (!dec->iso_buffer) {
+ dprintk("%s: pci_alloc_consistent - not enough memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
memset(dec->iso_buffer, 0,
ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF * ISO_BUF_COUNT));
dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
GFP_ATOMIC, &dec->irq_dma_handle);
if(!dec->irq_buffer) {
+ usb_free_urb(dec->irq_urb);
return -ENOMEM;
}
usb_fill_int_urb(dec->irq_urb, dec->udev,dec->irq_pipe,
{
int ret = -ENOIOCTLCMD;
- if (!file->f_op->ioctl)
+ if (!file->f_op->ioctl && !file->f_op->unlocked_ioctl)
return ret;
switch (cmd) {
select VIDEO_CX2341X
select VIDEO_CS5345
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMIZE
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
select VIDEO_CX25840
select VIDEO_CX2341X
select DVB_DIB7000P if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+ select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
+ select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
- select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
---help---
This is a video4linux driver for Conexant 23885 based
TV cards.
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_CX24123 if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_CX24116 if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_STV0288 if !DVB_FE_CUSTOMISE
select DVB_STB6000 if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB/ATSC cards based on the
Conexant 2388x chip.
dprintk("Stopping isoc\n");
for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
- usb_kill_urb(dev->adev->urb[i]);
+ usb_unlink_urb(dev->adev->urb[i]);
usb_free_urb(dev->adev->urb[i]);
dev->adev->urb[i] = NULL;
}
struct em28xx *dev = urb->context;
int i;
unsigned int oldptr;
- unsigned long flags;
int period_elapsed = 0;
int status;
unsigned char *cp;
if (!length)
continue;
- spin_lock_irqsave(&dev->adev->slock, flags);
-
oldptr = dev->adev->hwptr_done_capture;
+ if (oldptr + length >= runtime->buffer_size) {
+ unsigned int cnt =
+ runtime->buffer_size - oldptr;
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ cnt * stride);
+ memcpy(runtime->dma_area, cp + cnt * stride,
+ length * stride - cnt * stride);
+ } else {
+ memcpy(runtime->dma_area + oldptr * stride, cp,
+ length * stride);
+ }
+
+ snd_pcm_stream_lock(substream);
+
dev->adev->hwptr_done_capture += length;
if (dev->adev->hwptr_done_capture >=
runtime->buffer_size)
period_elapsed = 1;
}
- spin_unlock_irqrestore(&dev->adev->slock, flags);
-
- if (oldptr + length >= runtime->buffer_size) {
- unsigned int cnt =
- runtime->buffer_size - oldptr;
- memcpy(runtime->dma_area + oldptr * stride, cp,
- cnt * stride);
- memcpy(runtime->dma_area, cp + cnt * stride,
- length * stride - cnt * stride);
- } else {
- memcpy(runtime->dma_area + oldptr * stride, cp,
- length * stride);
- }
+ snd_pcm_stream_unlock(substream);
}
if (period_elapsed)
snd_pcm_period_elapsed(substream);
int ret, byte;
if (dev->state & DEV_DISCONNECTED)
- return(-ENODEV);
+ return -ENODEV;
+
+ if (len > URB_MAX_CTRL_SIZE)
+ return -EINVAL;
em28xx_regdbg("req=%02x, reg=%02x ", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, buf, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ if (ret < 0) {
+ if (reg_debug)
+ printk(" failed!\n");
+ mutex_unlock(&dev->ctrl_urb_lock);
+ return ret;
+ }
+
+ if (len)
+ memcpy(buf, dev->urb_buf, len);
+
+ mutex_unlock(&dev->ctrl_urb_lock);
if (reg_debug) {
- printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+ printk("%02x values: ", ret);
for (byte = 0; byte < len; byte++)
printk(" %02x", (unsigned char)buf[byte]);
-
printk("\n");
}
em28xx_regdbg("req=%02x, reg=%02x:", req, reg);
+ mutex_lock(&dev->ctrl_urb_lock);
ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, &val, 1, HZ);
-
- if (reg_debug)
- printk(ret < 0 ? " failed!\n" :
- "%02x\n", (unsigned char) val);
+ 0x0000, reg, dev->urb_buf, 1, HZ);
+ val = dev->urb_buf[0];
+ mutex_unlock(&dev->ctrl_urb_lock);
- if (ret < 0)
+ if (ret < 0) {
+ printk(" failed!\n");
return ret;
+ }
+
+ if (reg_debug)
+ printk("%02x\n", (unsigned char) val);
return val;
}
{
int ret;
- /*usb_control_msg seems to expect a kmalloced buffer */
- unsigned char *bufs;
-
if (dev->state & DEV_DISCONNECTED)
return -ENODEV;
- if (len < 1)
+ if ((len < 1) || (len > URB_MAX_CTRL_SIZE))
return -EINVAL;
- bufs = kmalloc(len, GFP_KERNEL);
-
em28xx_regdbg("req=%02x reg=%02x:", req, reg);
-
if (reg_debug) {
int i;
for (i = 0; i < len; ++i)
printk("\n");
}
- if (!bufs)
- return -ENOMEM;
- memcpy(bufs, buf, len);
+ mutex_lock(&dev->ctrl_urb_lock);
+ memcpy(dev->urb_buf, buf, len);
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
- 0x0000, reg, bufs, len, HZ);
+ 0x0000, reg, dev->urb_buf, len, HZ);
+ mutex_unlock(&dev->ctrl_urb_lock);
+
if (dev->wait_after_write)
msleep(dev->wait_after_write);
- kfree(bufs);
return ret;
}
break;
case EM28XX_AMUX_LINE_IN:
input = EM28XX_AUDIO_SRC_LINE;
+ video = disable;
+ line = enable;
break;
case EM28XX_AMUX_AC97_VIDEO:
input = EM28XX_AUDIO_SRC_LINE;
/* Check if board has eeprom */
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
if (err < 0) {
- em28xx_errdev("%s: i2c_master_recv failed! err [%d]\n",
- __func__, err);
- return err;
+ em28xx_errdev("board has no eeprom\n");
+ memset(eedata, 0, len);
+ return -ENODEV;
}
buf = 0;
dev->i2c_client.adapter = &dev->i2c_adap;
retval = em28xx_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
- if (retval < 0) {
+ if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
+
return retval;
}
if (i2c_scan)
em28xx_do_i2c_scan(dev);
+
return 0;
}
MODULE_LICENSE("GPL");
static LIST_HEAD(em28xx_devlist);
+static DEFINE_MUTEX(em28xx_devlist_mutex);
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static void em28xx_config_i2c(struct em28xx *dev)
{
struct v4l2_routing route;
+ int zero = 0;
route.input = INPUT(dev->ctl_input)->vmux;
route.output = 0;
- em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, NULL);
+ em28xx_i2c_call_clients(dev, VIDIOC_INT_RESET, &zero);
em28xx_i2c_call_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
em28xx_i2c_call_clients(dev, VIDIOC_STREAMON, NULL);
}
struct em28xx_fh *fh;
enum v4l2_buf_type fh_type = 0;
- lock_kernel();
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(h, &em28xx_devlist, devlist) {
if (h->vdev->minor == minor) {
dev = h;
dev = h;
}
}
- if (NULL == dev) {
- unlock_kernel();
+ mutex_unlock(&em28xx_devlist_mutex);
+ if (NULL == dev)
return -ENODEV;
- }
+
+ mutex_lock(&dev->lock);
em28xx_videodbg("open minor=%d type=%s users=%d\n",
minor, v4l2_type_names[fh_type], dev->users);
fh = kzalloc(sizeof(struct em28xx_fh), GFP_KERNEL);
if (!fh) {
em28xx_errdev("em28xx-video.c: Out of memory?!\n");
- unlock_kernel();
+ mutex_unlock(&dev->lock);
return -ENOMEM;
}
- mutex_lock(&dev->lock);
fh->dev = dev;
fh->radio = radio;
fh->type = fh_type;
sizeof(struct em28xx_buffer), fh);
mutex_unlock(&dev->lock);
- unlock_kernel();
return errCode;
}
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
mutex_lock(&em28xx_extension_devlist_lock);
list_add_tail(&ops->next, &em28xx_extension_devlist);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
}
printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
}
EXPORT_SYMBOL(em28xx_register_extension);
{
struct em28xx *dev = NULL;
+ mutex_lock(&em28xx_devlist_mutex);
list_for_each_entry(dev, &em28xx_devlist, devlist) {
if (dev)
ops->fini(dev);
printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name);
list_del(&ops->next);
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
}
EXPORT_SYMBOL(em28xx_unregister_extension);
}
+static int register_analog_devices(struct em28xx *dev)
+{
+ int ret;
+
+ /* allocate and fill video video_device struct */
+ dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
+ if (!dev->vdev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+
+ /* register v4l2 video video_device */
+ ret = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
+ video_nr[dev->devno]);
+ if (ret) {
+ em28xx_errdev("unable to register video device (error=%i).\n",
+ ret);
+ return ret;
+ }
+
+ /* Allocate and fill vbi video_device struct */
+ dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
+
+ /* register v4l2 vbi video_device */
+ ret = video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
+ vbi_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("unable to register vbi device\n");
+ return ret;
+ }
+
+ if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
+ dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
+ if (!dev->radio_dev) {
+ em28xx_errdev("cannot allocate video_device.\n");
+ return -ENODEV;
+ }
+ ret = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
+ radio_nr[dev->devno]);
+ if (ret < 0) {
+ em28xx_errdev("can't register radio device\n");
+ return ret;
+ }
+ em28xx_info("Registered radio device as /dev/radio%d\n",
+ dev->radio_dev->num);
+ }
+
+ em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
+ dev->vdev->num, dev->vbi_dev->num);
+
+ return 0;
+}
+
+
/*
* em28xx_init_dev()
* allocates and inits the device structs, registers i2c bus and v4l device
dev->udev = udev;
mutex_init(&dev->lock);
+ mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
init_waitqueue_head(&dev->open);
init_waitqueue_head(&dev->wait_frame);
errCode = em28xx_config(dev);
if (errCode) {
em28xx_errdev("error configuring device\n");
- em28xx_devused &= ~(1<<dev->devno);
- kfree(dev);
return -ENOMEM;
}
return errCode;
}
- list_add_tail(&dev->devlist, &em28xx_devlist);
-
- /* allocate and fill video video_device struct */
- dev->vdev = em28xx_vdev_init(dev, &em28xx_video_template, "video");
- if (NULL == dev->vdev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
-
- /* register v4l2 video video_device */
- retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER,
- video_nr[dev->devno]);
- if (retval) {
- em28xx_errdev("unable to register video device (error=%i).\n",
- retval);
- goto fail_unreg;
- }
-
- /* Allocate and fill vbi video_device struct */
- dev->vbi_dev = em28xx_vdev_init(dev, &em28xx_video_template, "vbi");
- /* register v4l2 vbi video_device */
- if (video_register_device(dev->vbi_dev, VFL_TYPE_VBI,
- vbi_nr[dev->devno]) < 0) {
- em28xx_errdev("unable to register vbi device\n");
- retval = -ENODEV;
- goto fail_unreg;
- }
-
- if (em28xx_boards[dev->model].radio.type == EM28XX_RADIO) {
- dev->radio_dev = em28xx_vdev_init(dev, &em28xx_radio_template, "radio");
- if (NULL == dev->radio_dev) {
- em28xx_errdev("cannot allocate video_device.\n");
- goto fail_unreg;
- }
- retval = video_register_device(dev->radio_dev, VFL_TYPE_RADIO,
- radio_nr[dev->devno]);
- if (retval < 0) {
- em28xx_errdev("can't register radio device\n");
- goto fail_unreg;
- }
- em28xx_info("Registered radio device as /dev/radio%d\n",
- dev->radio_dev->num);
- }
-
/* init video dma queues */
INIT_LIST_HEAD(&dev->vidq.active);
INIT_LIST_HEAD(&dev->vidq.queued);
video_mux(dev, 0);
- em28xx_info("V4L2 device registered as /dev/video%d and /dev/vbi%d\n",
- dev->vdev->num, dev->vbi_dev->num);
+ mutex_lock(&em28xx_devlist_mutex);
+ list_add_tail(&dev->devlist, &em28xx_devlist);
+ retval = register_analog_devices(dev);
+ if (retval < 0) {
+ em28xx_release_resources(dev);
+ mutex_unlock(&em28xx_devlist_mutex);
+ goto fail_reg_devices;
+ }
mutex_lock(&em28xx_extension_devlist_lock);
if (!list_empty(&em28xx_extension_devlist)) {
}
}
mutex_unlock(&em28xx_extension_devlist_lock);
+ mutex_unlock(&em28xx_devlist_mutex);
return 0;
-fail_unreg:
- em28xx_release_resources(dev);
+fail_reg_devices:
mutex_unlock(&dev->lock);
- kfree(dev);
return retval;
}
/* allocate device struct */
retval = em28xx_init_dev(&dev, udev, nr);
- if (retval)
+ if (retval) {
+ em28xx_devused &= ~(1<<dev->devno);
+ kfree(dev);
+
return retval;
+ }
em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
#define EM28XX_MIN_BUF 4
#define EM28XX_DEF_BUF 8
+/*Limits the max URB message size */
+#define URB_MAX_CTRL_SIZE 80
+
/* Params for validated field */
#define EM28XX_BOARD_NOT_VALIDATED 1
#define EM28XX_BOARD_VALIDATED 0
/* locks */
struct mutex lock;
+ struct mutex ctrl_urb_lock; /* protects urb_buf */
/* spinlock_t queue_lock; */
struct list_head inqueue, outqueue;
wait_queue_head_t open, wait_frame, wait_stream;
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[EM28XX_NUM_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[EM28XX_NUM_BUFS]; /* transfer buffers for isoc transfer */
+ char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
+
/* helper funcs that call usb_control_msg */
int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
char *buf, int len);
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
int retry = 50;
+ if (!gspca_dev->present)
+ return;
reg_w_val(gspca_dev, 0x0000, 0x00);
reg_r(gspca_dev, 0x0002, 1);
reg_w_val(gspca_dev, 0x0053, 0x00);
/* Stop the state machine */
if (dev->state != FPIX_NOP)
wait_for_completion(&dev->can_close);
+}
+
+/* called on streamoff with alt 0 and disconnect */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct usb_fpix *dev = (struct usb_fpix *) gspca_dev;
usb_free_urb(dev->control_urb);
dev->control_urb = NULL;
error:
/* Free the ressources */
sd_stopN(gspca_dev);
+ sd_stop0(gspca_dev);
return ret;
}
.init = sd_init,
.start = sd_start,
.stopN = sd_stopN,
+ .stop0 = sd_stop0,
};
/* -- device connect -- */
{
gspca_dev->streaming = 0;
atomic_set(&gspca_dev->nevent, 0);
- if (gspca_dev->present) {
- if (gspca_dev->sd_desc->stopN)
- gspca_dev->sd_desc->stopN(gspca_dev);
- destroy_urbs(gspca_dev);
- gspca_set_alt0(gspca_dev);
- if (gspca_dev->sd_desc->stop0)
- gspca_dev->sd_desc->stop0(gspca_dev);
- PDEBUG(D_STREAM, "stream off OK");
- }
+ if (gspca_dev->present
+ && gspca_dev->sd_desc->stopN)
+ gspca_dev->sd_desc->stopN(gspca_dev);
+ destroy_urbs(gspca_dev);
+ gspca_set_alt0(gspca_dev);
+ if (gspca_dev->sd_desc->stop0)
+ gspca_dev->sd_desc->stop0(gspca_dev);
+ PDEBUG(D_STREAM, "stream off OK");
}
static void gspca_set_default_mode(struct gspca_dev *gspca_dev)
int ret;
PDEBUG(D_STREAM, "%s open", current->comm);
- gspca_dev = (struct gspca_dev *) video_devdata(file);
+ gspca_dev = video_drvdata(file);
if (mutex_lock_interruptible(&gspca_dev->queue_lock))
return -ERESTARTSYS;
if (!gspca_dev->present) {
ret = -EBUSY;
goto out;
}
+
+ /* protect the subdriver against rmmod */
+ if (!try_module_get(gspca_dev->module)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
gspca_dev->users++;
/* one more user */
#ifdef GSPCA_DEBUG
/* activate the v4l2 debug */
if (gspca_debug & D_V4L2)
- gspca_dev->vdev.debug |= V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug |= V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG;
else
- gspca_dev->vdev.debug &= ~(V4L2_DEBUG_IOCTL
+ gspca_dev->vdev->debug &= ~(V4L2_DEBUG_IOCTL
| V4L2_DEBUG_IOCTL_ARG);
#endif
ret = 0;
gspca_dev->memory = GSPCA_MEMORY_NO;
}
file->private_data = NULL;
+ module_put(gspca_dev->module);
mutex_unlock(&gspca_dev->queue_lock);
PDEBUG(D_STREAM, "close done");
struct gspca_dev *gspca_dev = priv;
int ret;
- if (mutex_lock_interruptible(&gspca_dev->usb_lock))
- return -ERESTARTSYS;
if (!gspca_dev->sd_desc->set_jcomp)
return -EINVAL;
+ if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+ return -ERESTARTSYS;
ret = gspca_dev->sd_desc->set_jcomp(gspca_dev, jpegcomp);
mutex_unlock(&gspca_dev->usb_lock);
return ret;
return ret;
}
-static void dev_release(struct video_device *vfd)
-{
- /* nothing */
-}
-
static struct file_operations dev_fops = {
.owner = THIS_MODULE,
.open = dev_open,
.name = "gspca main driver",
.fops = &dev_fops,
.ioctl_ops = &dev_ioctl_ops,
- .release = dev_release, /* mandatory */
+ .release = video_device_release,
.minor = -1,
};
init_waitqueue_head(&gspca_dev->wq);
/* init video stuff */
- memcpy(&gspca_dev->vdev, &gspca_template, sizeof gspca_template);
- gspca_dev->vdev.parent = &dev->dev;
- memcpy(&gspca_dev->fops, &dev_fops, sizeof gspca_dev->fops);
- gspca_dev->vdev.fops = &gspca_dev->fops;
- gspca_dev->fops.owner = module; /* module protection */
+ gspca_dev->vdev = video_device_alloc();
+ memcpy(gspca_dev->vdev, &gspca_template, sizeof gspca_template);
+ gspca_dev->vdev->parent = &dev->dev;
+ gspca_dev->module = module;
gspca_dev->present = 1;
- ret = video_register_device(&gspca_dev->vdev,
+ video_set_drvdata(gspca_dev->vdev, gspca_dev);
+ ret = video_register_device(gspca_dev->vdev,
VFL_TYPE_GRABBER,
video_nr);
if (ret < 0) {
err("video_register_device err %d", ret);
+ video_device_release(gspca_dev->vdev);
goto out;
}
PDEBUG(D_PROBE, "probe ok");
return 0;
out:
- kref_put(&gspca_dev->kref, gspca_delete);
+ kfree(gspca_dev->usb_buf);
+ kfree(gspca_dev);
return ret;
}
EXPORT_SYMBOL(gspca_dev_probe);
usb_set_intfdata(intf, NULL);
/* We don't want people trying to open up the device */
- video_unregister_device(&gspca_dev->vdev);
+ video_unregister_device(gspca_dev->vdev);
gspca_dev->present = 0;
gspca_dev->streaming = 0;
cam_pkt_op pkt_scan;
/* optional operations */
cam_v_op stopN; /* called on stream off - main alt */
- cam_v_op stop0; /* called on stream off - alt 0 */
+ cam_v_op stop0; /* called on stream off & disconnect - alt 0 */
cam_v_op dq_callback; /* called when a frame has been dequeued */
cam_jpg_op get_jcomp;
cam_jpg_op set_jcomp;
};
struct gspca_dev {
- struct video_device vdev; /* !! must be the first item */
- struct file_operations fops;
+ struct video_device *vdev;
+ struct module *module; /* subdriver handling the device */
struct usb_device *dev;
struct kref kref;
struct file *capt_file; /* file doing video capture */
reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->sensor == SENSOR_PAC7302) {
reg_w(gspca_dev, 0xff, 0x01);
reg_w(gspca_dev, 0x78, 0x40);
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x01, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
}
reg_write(gspca_dev->dev, 0x02, 0x00, 0x00);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
+ if (!gspca_dev->present)
+ return;
+
/* This maybe reset or power control */
reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
reg_write(gspca_dev->dev, 0x03, 0x01, 0x0);
}
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
if (sd->chip_revision == Rev012A) {
reg_w_val(gspca_dev->dev, 0x8118, 0x29);
reg_w_val(gspca_dev->dev, 0x8114, 0x08);
reg_w(dev, 0xa0, 0x09, 0xb003);
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct usb_device *dev = gspca_dev->dev;
+ if (!gspca_dev->present)
+ return;
reg_w(dev, 0x89, 0xffff, 0xffff);
}
return 0;
}
+/* called on streamoff with alt 0 and on disconnect */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
+ if (!gspca_dev->present)
+ return;
send_unknown(gspca_dev->dev, sd->sensor);
}
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_TDA10048 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
---help---
#define S2255_FW_FAILED 3
#define S2255_FW_DISCONNECTING 4
-#define S2255_FW_MARKER 0x22552f2f
+#define S2255_FW_MARKER cpu_to_le32(0x22552f2f)
/* 2255 read states */
#define S2255_READ_IDLE 0
#define S2255_READ_FRAME 1
select DVB_NXT200X if !DVB_FE_CUSTOMISE
select DVB_TDA10086 if !DVB_FE_CUSTOMISE
select DVB_TDA826X if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
select DVB_ISL6421 if !DVB_FE_CUSTOMISE
- select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+ select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMIZE
+ select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMIZE
---help---
This adds support for DVB cards based on the
Philips saa7134 chip.
return FAILED;
}
+ /* make sure we have no outstanding commands at this stage */
+ mptscsih_flush_running_cmds(hd);
+
ioc = hd->ioc;
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
ioc->name, SCpnt);
* @req: the request to prepare
*
* Allocate the necessary i2o_block_request struct and connect it to
- * the request. This is needed that we not loose the SG list later on.
+ * the request. This is needed that we not lose the SG list later on.
*
* Returns BLKPREP_OK on success or BLKPREP_DEFER on failure.
*/
/**
* i2o_msg_get_wait - obtain an I2O message from the IOP
* @c: I2O controller
- * @msg: pointer to a I2O message pointer
* @wait: how long to wait until timeout
*
* This function waits up to wait seconds for a message slot to be
return 1;
*paddr = pte_pfn(pte) << PAGE_SHIFT;
+#ifdef CONFIG_HUGETLB_PAGE
*pageshift = is_vm_hugetlb_page(vma) ? HPAGE_SHIFT : PAGE_SHIFT;
+#else
+ *pageshift = PAGE_SHIFT;
+#endif
return 0;
err:
.fault = gru_fault,
};
-module_init(gru_init);
+fs_initcall(gru_init);
module_exit(gru_exit);
module_param(gru_options, ulong, 0644);
goto outinput;
}
- if (!acpi_video_backlight_support()) {
- printk(KERN_INFO DRV_PFX "Sony: Brightness ignored, must be "
+ if (acpi_video_backlight_support()) {
+ printk(KERN_INFO DRV_PFX "brightness ignored, must be "
"controlled by ACPI video driver\n");
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&handle))) {
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
+static u8 fan_control_resume_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- if ((level != TP_EC_FAN_AUTO) &&
- (level != TP_EC_FAN_FULLSPEED) &&
+ if (!(level & TP_EC_FAN_AUTO) &&
+ !(level & TP_EC_FAN_FULLSPEED) &&
((level < 0) || (level > 7)))
return -EINVAL;
static void fan_suspend(pm_message_t state)
{
+ int rc;
+
if (!fan_control_allowed)
return;
/* Store fan status in cache */
- fan_get_status_safe(NULL);
+ fan_control_resume_level = 0;
+ rc = fan_get_status_safe(&fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to read fan level for later "
+ "restore during resume: %d\n", rc);
+
+ /* if it is undefined, don't attempt to restore it.
+ * KEEP THIS LAST */
if (tp_features.fan_ctrl_status_undef)
- fan_control_desired_level = TP_EC_FAN_AUTO;
+ fan_control_resume_level = 0;
}
static void fan_resume(void)
{
- u8 saved_fan_level;
u8 current_level = 7;
bool do_set = false;
+ int rc;
/* DSDT *always* updates status on resume */
tp_features.fan_ctrl_status_undef = 0;
- saved_fan_level = fan_control_desired_level;
if (!fan_control_allowed ||
+ !fan_control_resume_level ||
(fan_get_status_safe(¤t_level) < 0))
return;
switch (fan_control_access_mode) {
case TPACPI_FAN_WR_ACPI_SFAN:
- do_set = (saved_fan_level > current_level);
+ /* never decrease fan level */
+ do_set = (fan_control_resume_level > current_level);
break;
case TPACPI_FAN_WR_ACPI_FANS:
case TPACPI_FAN_WR_TPEC:
- do_set = ((saved_fan_level & TP_EC_FAN_FULLSPEED) ||
- (saved_fan_level == 7 &&
- !(current_level & TP_EC_FAN_FULLSPEED)));
+ /* never decrease fan level, scale is:
+ * TP_EC_FAN_FULLSPEED > 7 >= TP_EC_FAN_AUTO
+ *
+ * We expect the firmware to set either 7 or AUTO, but we
+ * handle FULLSPEED out of paranoia.
+ *
+ * So, we can safely only restore FULLSPEED or 7, anything
+ * else could slow the fan. Restoring AUTO is useless, at
+ * best that's exactly what the DSDT already set (it is the
+ * slower it uses).
+ *
+ * Always keep in mind that the DSDT *will* have set the
+ * fans to what the vendor supposes is the best level. We
+ * muck with it only to speed the fan up.
+ */
+ if (fan_control_resume_level != 7 &&
+ !(fan_control_resume_level & TP_EC_FAN_FULLSPEED))
+ return;
+ else
+ do_set = !(current_level & TP_EC_FAN_FULLSPEED) &&
+ (current_level != fan_control_resume_level);
break;
default:
return;
if (do_set) {
printk(TPACPI_NOTICE
"restoring fan level to 0x%02x\n",
- saved_fan_level);
- fan_set_level_safe(saved_fan_level);
+ fan_control_resume_level);
+ rc = fan_set_level_safe(fan_control_resume_level);
+ if (rc < 0)
+ printk(TPACPI_NOTICE
+ "failed to restore fan level: %d\n", rc);
}
}
#define OPCODE_NORM_READ 0x03 /* Read data bytes (low frequency) */
#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */
#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */
-#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
+#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */
#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */
-#define OPCODE_BE 0xc7 /* Erase whole flash block */
+#define OPCODE_CHIP_ERASE 0xc7 /* Erase whole flash chip */
#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */
#define OPCODE_RDID 0x9f /* Read JEDEC ID */
*
* Returns 0 if successful, non-zero otherwise.
*/
-static int erase_block(struct m25p *flash)
+static int erase_chip(struct m25p *flash)
{
DEBUG(MTD_DEBUG_LEVEL3, "%s: %s %dKiB\n",
flash->spi->dev.bus_id, __func__,
write_enable(flash);
/* Set up command buffer. */
- flash->command[0] = OPCODE_BE;
+ flash->command[0] = OPCODE_CHIP_ERASE;
spi_write(flash->spi, flash->command, 1);
mutex_lock(&flash->lock);
- /* REVISIT in some cases we could speed up erasing large regions
- * by using OPCODE_SE instead of OPCODE_BE_4K
- */
-
- /* now erase those sectors */
- if (len == flash->mtd.size && erase_block(flash)) {
+ /* whole-chip erase? */
+ if (len == flash->mtd.size && erase_chip(flash)) {
instr->state = MTD_ERASE_FAILED;
mutex_unlock(&flash->lock);
return -EIO;
+
+ /* REVISIT in some cases we could speed up erasing large regions
+ * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
+ * to use "small sector erase", but that's not always optimal.
+ */
+
+ /* "sector"-at-a-time erase */
} else {
while (len) {
if (erase_sector(flash, addr)) {
for (tmp = 0, info = m25p_data;
tmp < ARRAY_SIZE(m25p_data);
tmp++, info++) {
- if (info->jedec_id == jedec)
- if (ext_jedec != 0 && info->ext_id != ext_jedec)
+ if (info->jedec_id == jedec) {
+ if (info->ext_id != 0 && info->ext_id != ext_jedec)
continue;
return info;
+ }
}
dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec);
return NULL;
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/concat.h>
-#include <asm/io.h>
+#include <linux/io.h>
#define MAX_RESOURCES 4
struct mtd_info *mtd[MAX_RESOURCES];
struct mtd_info *cmtd;
struct map_info map[MAX_RESOURCES];
- struct resource *res;
#ifdef CONFIG_MTD_PARTITIONS
int nr_parts;
struct mtd_partition *parts;
#endif
map_destroy(info->mtd[i]);
}
-
- if (info->map[i].virt != NULL)
- iounmap(info->map[i].virt);
- }
-
- if (info->res != NULL) {
- release_resource(info->res);
- kfree(info->res);
}
-
return 0;
}
if (physmap_data == NULL)
return -ENODEV;
- info = kzalloc(sizeof(struct physmap_flash_info), GFP_KERNEL);
+ info = devm_kzalloc(&dev->dev, sizeof(struct physmap_flash_info),
+ GFP_KERNEL);
if (info == NULL) {
err = -ENOMEM;
goto err_out;
(unsigned long long)(dev->resource[i].end - dev->resource[i].start + 1),
(unsigned long long)dev->resource[i].start);
- info->res = request_mem_region(dev->resource[i].start,
- dev->resource[i].end - dev->resource[i].start + 1,
- dev->dev.bus_id);
- if (info->res == NULL) {
+ if (!devm_request_mem_region(&dev->dev,
+ dev->resource[i].start,
+ dev->resource[i].end - dev->resource[i].start + 1,
+ dev->dev.bus_id)) {
dev_err(&dev->dev, "Could not reserve memory region\n");
err = -ENOMEM;
goto err_out;
info->map[i].bankwidth = physmap_data->width;
info->map[i].set_vpp = physmap_data->set_vpp;
- info->map[i].virt = ioremap(info->map[i].phys, info->map[i].size);
+ info->map[i].virt = devm_ioremap(&dev->dev, info->map[i].phys,
+ info->map[i].size);
if (info->map[i].virt == NULL) {
dev_err(&dev->dev, "Failed to ioremap flash region\n");
err = EIO;
ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0);
#ifdef CONFIG_MTD_OF_PARTS
- if (ret == 0)
- ret = of_mtd_parse_partitions(fun->dev, &fun->mtd,
- flash_np, &fun->parts);
+ if (ret == 0) {
+ ret = of_mtd_parse_partitions(fun->dev, flash_np, &fun->parts);
+ if (ret < 0)
+ goto err;
+ }
#endif
if (ret > 0)
ret = add_mtd_partitions(&fun->mtd, fun->parts, ret);
}
lpcctl = pci_resource_start(pdev, 0);
+ pci_dev_put(pdev);
if (!request_region(lpcctl, 4, driver_name)) {
err = -EBUSY;
static struct pxa3xx_nand_flash stm2GbX16 = {
.timing = &stm2GbX16_timing,
+ .cmdset = &largepage_cmdset,
.page_per_block = 64,
.page_size = 2048,
.flash_width = 16,
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/mach/flash.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/onenand.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pm.h>
+#include <mach/gpmc.h>
+#include <mach/onenand.h>
+#include <mach/gpio.h>
+#include <mach/pm.h>
-#include <linux/dma-mapping.h>
-#include <asm/dma-mapping.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
#define DRIVER_NAME "omap2-onenand"
}
/*
- * OK, now the LEB is locked and we can safely start moving iy. Since
+ * OK, now the LEB is locked and we can safely start moving it. Since
* this function utilizes thie @ubi->peb1_buf buffer which is shared
* with some other functions, so lock the buffer by taking the
* @ubi->buf_mutex.
}
err = ubi_io_read_data(ubi, buf, pnum, 0, len);
- if (err && err != UBI_IO_BITFLIPS)
+ if (err && err != UBI_IO_BITFLIPS && err != -EBADMSG)
goto out_free_buf;
data_crc = be32_to_cpu(vid_hdr->data_crc);
ubi_msg("%s: %d consecutive failures",
ubi->bgt_name, WL_MAX_FAILURES);
ubi_ro_mode(ubi);
- break;
+ ubi->thread_enabled = 0;
+ continue;
}
} else
failures = 0;
config FEC_MPC52xx
tristate "MPC52xx FEC driver"
- depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select CRC32
select PHYLIB
+ select PPC_BESTCOMM_FEC
---help---
This option enables support for the MPC5200's on-chip
Fast Ethernet Controller
obj-$(CONFIG_NE2000) += ne.o 8390p.o
obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
obj-$(CONFIG_HPLAN) += hp.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390.o
+obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
obj-$(CONFIG_ULTRA) += smc-ultra.o 8390.o
obj-$(CONFIG_ULTRAMCA) += smc-mca.o 8390.o
obj-$(CONFIG_ULTRA32) += smc-ultra32.o 8390.o
for (j = 0; j < bp->rx_max_pg_ring; j++) {
if (rxr->rx_pg_desc_ring[j])
pci_free_consistent(bp->pdev, RXBD_RING_SIZE,
- rxr->rx_pg_desc_ring[i],
- rxr->rx_pg_desc_mapping[i]);
- rxr->rx_pg_desc_ring[i] = NULL;
+ rxr->rx_pg_desc_ring[j],
+ rxr->rx_pg_desc_mapping[j]);
+ rxr->rx_pg_desc_ring[j] = NULL;
}
if (rxr->rx_pg_ring)
vfree(rxr->rx_pg_ring);
return 0;
}
+static void
+bnx2_chk_missed_msi(struct bnx2 *bp)
+{
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ u32 msi_ctrl;
+
+ if (bnx2_has_work(bnapi)) {
+ msi_ctrl = REG_RD(bp, BNX2_PCICFG_MSI_CONTROL);
+ if (!(msi_ctrl & BNX2_PCICFG_MSI_CONTROL_ENABLE))
+ return;
+
+ if (bnapi->last_status_idx == bp->idle_chk_status_idx) {
+ REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl &
+ ~BNX2_PCICFG_MSI_CONTROL_ENABLE);
+ REG_WR(bp, BNX2_PCICFG_MSI_CONTROL, msi_ctrl);
+ bnx2_msi(bp->irq_tbl[0].vector, bnapi);
+ }
+ }
+
+ bp->idle_chk_status_idx = bnapi->last_status_idx;
+}
+
static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
{
struct status_block *sblk = bnapi->status_blk.msi;
work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
- if (unlikely(work_done >= budget))
- break;
-
/* bnapi->last_status_idx is used below to tell the hw how
* much work has been processed, so we must read it before
* checking for more work.
*/
bnapi->last_status_idx = sblk->status_idx;
+
+ if (unlikely(work_done >= budget))
+ break;
+
rmb();
if (likely(!bnx2_has_work(bnapi))) {
netif_rx_complete(bp->dev, napi);
for (i = 0; i < BNX2_MAX_MSIX_VEC; i++)
bp->bnx2_napi[i].last_status_idx = 0;
+ bp->idle_chk_status_idx = 0xffff;
+
bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE;
/* Set up how to generate a link change interrupt. */
if (atomic_read(&bp->intr_sem) != 0)
goto bnx2_restart_timer;
+ if ((bp->flags & (BNX2_FLAG_USING_MSI | BNX2_FLAG_ONE_SHOT_MSI)) ==
+ BNX2_FLAG_USING_MSI)
+ bnx2_chk_missed_msi(bp);
+
bnx2_send_heart_beat(bp);
bp->stats_blk->stat_FwRxDrop =
* pci_config_l definition
* offset: 0000
*/
+#define BNX2_PCICFG_MSI_CONTROL 0x00000058
+#define BNX2_PCICFG_MSI_CONTROL_ENABLE (1L<<16)
+
#define BNX2_PCICFG_MISC_CONFIG 0x00000068
#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2)
#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3)
u8 num_tx_rings;
u8 num_rx_rings;
+
+ u32 idle_chk_status_idx;
+
};
#define REG_RD(bp, offset) \
* @pdev: the PCI device that received the packet
* @fl: the SGE free list holding the packet
* @len: the actual packet length, excluding any SGE padding
- * @dma_pad: padding at beginning of buffer left by SGE DMA
- * @skb_pad: padding to be used if the packet is copied
- * @copy_thres: length threshold under which a packet should be copied
- * @drop_thres: # of remaining buffers before we start dropping packets
*
* Get the next packet from a free list and complete setup of the
* sk_buff. If the packet is small we make a copy and recycle the
ctrl |= E1000_CTRL_PHY_RST;
}
ret_val = e1000_acquire_swflag_ich8lan(hw);
+ /* Whether or not the swflag was acquired, we need to reset the part */
hw_dbg(hw, "Issuing a global reset to ich8lan");
ew32(CTRL, (ctrl | E1000_CTRL_RST));
msleep(20);
- /* release the swflag because it is not reset by hardware reset */
- e1000_release_swflag_ich8lan(hw);
+ if (!ret_val) {
+ /* release the swflag because it is not reset by
+ * hardware reset
+ */
+ e1000_release_swflag_ich8lan(hw);
+ }
ret_val = e1000e_get_auto_rd_done(hw);
if (ret_val) {
/**
* e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
* @adapter: address of board private structure
- * @rx_ring: pointer to receive ring structure
* @cleaned_count: number of buffers to allocate this pass
**/
return erxrdpt;
}
+/*
+ * Calculate wrap around when reading beyond the end of the RX buffer
+ */
+static u16 rx_packet_start(u16 ptr)
+{
+ if (ptr + RSV_SIZE > RXEND_INIT)
+ return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
+ else
+ return ptr + RSV_SIZE;
+}
+
static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
{
u16 erxrdpt;
skb->dev = ndev;
skb_reserve(skb, NET_IP_ALIGN);
/* copy the packet from the receive buffer */
- enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
- len, skb_put(skb, len));
+ enc28j60_mem_read(priv,
+ rx_packet_start(priv->next_pk_ptr),
+ len, skb_put(skb, len));
if (netif_msg_pktdata(priv))
dump_packet(__func__, skb->len, skb->data);
skb->protocol = eth_type_trans(skb, ndev);
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += len;
ndev->last_rx = jiffies;
- netif_rx(skb);
+ netif_rx_ni(skb);
}
}
/*
dev->open = &hpp_open;
dev->stop = &hpp_close;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ei_poll;
+ dev->poll_controller = eip_poll;
#endif
ei_status.name = name;
/**
* igb_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
* @tx_ring: Tx descriptor ring for a specific queue
*
* Free all transmit software resources
/**
* igb_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
* @tx_ring: ring to be cleaned
**/
static void igb_clean_tx_ring(struct igb_ring *tx_ring)
/**
* igb_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
* @rx_ring: ring to clean the resources from
*
* Free all receive software resources
/**
* igb_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
* @rx_ring: ring to free buffers from
**/
static void igb_clean_rx_ring(struct igb_ring *rx_ring)
* ixgbe_intr - legacy mode Interrupt Handler
* @irq: interrupt number
* @data: pointer to a network interface device structure
- * @pt_regs: CPU registers structure
**/
static irqreturn_t ixgbe_intr(int irq, void *data)
{
* Once we know the feature-set enabled for the device, we'll cache
* the register offset the descriptor ring is assigned to.
**/
-static void __devinit ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
{
int feature_mask = 0, rss_i;
int i, txr_idx, rxr_idx;
* number of queues at compile-time. The polling_netdev array is
* intended for Multiqueue, but should work fine with a single queue.
**/
-static int __devinit ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
{
int i;
* Attempt to configure the interrupts using the best available
* capabilities of the hardware and the kernel.
**/
-static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
- *adapter)
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
{
int err = 0;
int vector, v_budget;
* - Hardware queue count (num_*_queues)
* - defined by miscellaneous hardware support/features (RSS, etc.)
**/
-static int __devinit ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+static int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
{
int err;
*/
#ifndef __JME_H_INCLUDED__
-#define __JME_H_INCLUDEE__
+#define __JME_H_INCLUDED__
#define DRV_NAME "jme"
#define DRV_VERSION "1.0.3"
struct sk_buff *nskb;
unsigned int i;
+ if (skb->protocol == htons(ETH_P_PAUSE))
+ return;
+
for (i = 0; i < MACVLAN_HASH_SIZE; i++) {
hlist_for_each_entry_rcu(vlan, n, &port->vlan_hash[i], hlist) {
dev = vlan->dev;
struct mlx4_priv *priv = mlx4_priv(dev);
int err;
int port;
+ __be32 ib_port_default_caps;
err = mlx4_init_uar_table(dev);
if (err) {
}
for (port = 1; port <= dev->caps.num_ports; port++) {
+ ib_port_default_caps = 0;
+ err = mlx4_get_port_ib_caps(dev, port, &ib_port_default_caps);
+ if (err)
+ mlx4_warn(dev, "failed to get port %d default "
+ "ib capabilities (%d). Continuing with "
+ "caps = 0\n", port, err);
+ dev->caps.ib_port_def_cap[port] = ib_port_default_caps;
err = mlx4_SET_PORT(dev, port);
if (err) {
mlx4_err(dev, "Failed to set port %d, aborting\n",
void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table);
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps);
#endif /* MLX4_H */
}
EXPORT_SYMBOL_GPL(mlx4_unregister_vlan);
+int mlx4_get_port_ib_caps(struct mlx4_dev *dev, u8 port, __be32 *caps)
+{
+ struct mlx4_cmd_mailbox *inmailbox, *outmailbox;
+ u8 *inbuf, *outbuf;
+ int err;
+
+ inmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inmailbox))
+ return PTR_ERR(inmailbox);
+
+ outmailbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outmailbox)) {
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ return PTR_ERR(outmailbox);
+ }
+
+ inbuf = inmailbox->buf;
+ outbuf = outmailbox->buf;
+ memset(inbuf, 0, 256);
+ memset(outbuf, 0, 256);
+ inbuf[0] = 1;
+ inbuf[1] = 1;
+ inbuf[2] = 1;
+ inbuf[3] = 1;
+ *(__be16 *) (&inbuf[16]) = cpu_to_be16(0x0015);
+ *(__be32 *) (&inbuf[20]) = cpu_to_be32(port);
+
+ err = mlx4_cmd_box(dev, inmailbox->dma, outmailbox->dma, port, 3,
+ MLX4_CMD_MAD_IFC, MLX4_CMD_TIME_CLASS_C);
+ if (!err)
+ *caps = *(__be32 *) (outbuf + 84);
+ mlx4_free_cmd_mailbox(dev, inmailbox);
+ mlx4_free_cmd_mailbox(dev, outmailbox);
+ return err;
+}
+
int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port)
{
struct mlx4_cmd_mailbox *mailbox;
((u8 *) mailbox->buf)[3] = 6;
((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15);
((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15);
- }
+ } else
+ ((__be32 *) mailbox->buf)[1] = dev->caps.ib_port_def_cap[port];
err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B);
priv->xmac_base = priv->xc->xmac_base;
priv->sram_base = priv->xc->sram_base;
+ spin_lock_init(&priv->lock);
+
ret = pfifo_request(PFIFO_MASK(priv->id));
if (ret) {
printk("unable to request PFIFO\n");
PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
+ PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FastEtherCard", 0x281f1c5d, 0x7ef26116),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "FEP501", 0x281f1c5d, 0x2e272058),
* ax_interrupt - handle the interrupts from an 8390
* @irq: interrupt number
* @dev_id: a pointer to the net_device
- * @regs: unused
*
* Handle the ether interface interrupts. We pull packets from
* the 8390 via the card specific functions and fire them at the networking
return 0;
}
-static int ibmtr_resume(struct pcmcia_device *link)
+static int __devinit ibmtr_resume(struct pcmcia_device *link)
{
ibmtr_dev_t *info = link->priv;
struct net_device *dev = info->dev;
PCMCIA_DEVICE_PROD_ID12("National Semiconductor", "InfoMover NE4100", 0x36e1191f, 0xa6617ec8),
PCMCIA_DEVICE_PROD_ID12("NEC", "PC-9801N-J12", 0x18df0ba0, 0xbc912d76),
PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA410TX", 0x9aa79dc3, 0x60e5bc0e),
- PCMCIA_DEVICE_PROD_ID12("NETGEAR", "FA411", 0x9aa79dc3, 0x40fad875),
PCMCIA_DEVICE_PROD_ID12("Network Everywhere", "Fast Ethernet 10/100 PC Card", 0x820a67b6, 0x31ed1a5f),
PCMCIA_DEVICE_PROD_ID12("NextCom K.K.", "Next Hawk", 0xaedaec74, 0xad050ef1),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "10/100Mbps Ethernet Card", 0x281f1c5d, 0x6e41773b),
return -EINVAL;
}
- bus->state = MDIOBUS_REGISTERED;
-
mutex_init(&bus->mdio_lock);
if (bus->reset)
}
}
+ if (!err)
+ bus->state = MDIOBUS_REGISTERED;
+
pr_info("%s: probed\n", bus->name);
return err;
if (r)
return ERR_PTR(r);
- /* If the phy_id is all Fs or all 0s, there is no device there */
- if ((0xffff == phy_id) || (0x00 == phy_id))
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((phy_id & 0x1fffffff) == 0x1fffffff)
+ return NULL;
+
+ /*
+ * Broken hardware is sometimes missing the pull down resistor on the
+ * MDIO line, which results in reads to non-existent devices returning
+ * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+ * device as well.
+ */
+ if (phy_id == 0)
return NULL;
dev = phy_device_create(bus, addr, phy_id);
#define MII_VSC8244_IMASK_DUPLEX 0x1000
#define MII_VSC8244_IMASK_MASK 0xf000
+#define MII_VSC8221_IMASK_MASK 0xa000
+
/* Vitesse Interrupt Status Register */
#define MII_VSC8244_ISTAT 0x1a
#define MII_VSC8244_ISTAT_STATUS 0x8000
#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
#define MII_VSC8244_AUXCONSTAT_100 0x0008
+#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+
+#define PHY_ID_VSC8244 0x000fc6c0
+#define PHY_ID_VSC8221 0x000fc550
+
MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");
return (err < 0) ? err : 0;
}
-static int vsc824x_config_intr(struct phy_device *phydev)
+static int vsc82xx_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_VSC8244_IMASK,
- MII_VSC8244_IMASK_MASK);
+ phydev->drv->phy_id == PHY_ID_VSC8244 ?
+ MII_VSC8244_IMASK_MASK :
+ MII_VSC8221_IMASK_MASK);
else {
/*
* The Vitesse PHY cannot clear the interrupt
/* Vitesse 824x */
static struct phy_driver vsc8244_driver = {
- .phy_id = 0x000fc6c0,
+ .phy_id = PHY_ID_VSC8244,
.name = "Vitesse VSC8244",
.phy_id_mask = 0x000fffc0,
.features = PHY_GBIT_FEATURES,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &vsc824x_ack_interrupt,
- .config_intr = &vsc824x_config_intr,
+ .config_intr = &vsc82xx_config_intr,
.driver = { .owner = THIS_MODULE,},
};
-static int __init vsc8244_init(void)
+static int vsc8221_config_init(struct phy_device *phydev)
{
- return phy_driver_register(&vsc8244_driver);
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8221_AUXCONSTAT_INIT);
+ return err;
+
+ /* Perhaps we should set EXT_CON1 based on the interface?
+ Options are 802.3Z SerDes or SGMII */
+}
+
+/* Vitesse 8221 */
+static struct phy_driver vsc8221_driver = {
+ .phy_id = PHY_ID_VSC8221,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8221",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &vsc8221_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &vsc824x_ack_interrupt,
+ .config_intr = &vsc82xx_config_intr,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init vsc82xx_init(void)
+{
+ int err;
+
+ err = phy_driver_register(&vsc8244_driver);
+ if (err < 0)
+ return err;
+ err = phy_driver_register(&vsc8221_driver);
+ if (err < 0)
+ phy_driver_unregister(&vsc8244_driver);
+ return err;
}
-static void __exit vsc8244_exit(void)
+static void __exit vsc82xx_exit(void)
{
phy_driver_unregister(&vsc8244_driver);
+ phy_driver_unregister(&vsc8221_driver);
}
-module_init(vsc8244_init);
-module_exit(vsc8244_exit);
+module_init(vsc82xx_init);
+module_exit(vsc82xx_exit);
unsigned long last_xmit; /* jiffies when last pkt sent 9c */
unsigned long last_recv; /* jiffies when last pkt rcvd a0 */
struct net_device *dev; /* network interface device a4 */
+ int closing; /* is device closing down? a8 */
#ifdef CONFIG_PPP_MULTILINK
int nxchan; /* next channel to send something on */
u32 nxseq; /* next sequence number to send */
struct sk_buff *skb;
ppp_xmit_lock(ppp);
- if (ppp->dev) {
+ if (!ppp->closing) {
ppp_push(ppp);
while (!ppp->xmit_pending
&& (skb = skb_dequeue(&ppp->file.xq)))
ppp_do_recv(struct ppp *ppp, struct sk_buff *skb, struct channel *pch)
{
ppp_recv_lock(ppp);
- /* ppp->dev == 0 means interface is closing down */
- if (ppp->dev)
+ if (!ppp->closing)
ppp_receive_frame(ppp, skb, pch);
else
kfree_skb(skb);
*/
static void ppp_shutdown_interface(struct ppp *ppp)
{
- struct net_device *dev;
-
mutex_lock(&all_ppp_mutex);
- ppp_lock(ppp);
- dev = ppp->dev;
- ppp->dev = NULL;
- ppp_unlock(ppp);
/* This will call dev_close() for us. */
- if (dev) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
+ ppp_lock(ppp);
+ if (!ppp->closing) {
+ ppp->closing = 1;
+ ppp_unlock(ppp);
+ unregister_netdev(ppp->dev);
+ } else
+ ppp_unlock(ppp);
+
cardmap_set(&all_ppp_units, ppp->file.index, NULL);
ppp->file.dead = 1;
ppp->owner = NULL;
if (ppp->xmit_pending)
kfree_skb(ppp->xmit_pending);
- kfree(ppp);
+ free_netdev(ppp->dev);
}
/*
if (pch->file.hdrlen > ppp->file.hdrlen)
ppp->file.hdrlen = pch->file.hdrlen;
hdrlen = pch->file.hdrlen + 2; /* for protocol bytes */
- if (ppp->dev && hdrlen > ppp->dev->hard_header_len)
+ if (hdrlen > ppp->dev->hard_header_len)
ppp->dev->hard_header_len = hdrlen;
list_add_tail(&pch->clist, &ppp->channels);
++ppp->n_channels;
kfree_skb(skb);
sock_put(sk);
}
+ sock_put(sk);
}
release_sock(sk);
* sis900_interrupt - sis900 interrupt handler
* @irq: the irq number
* @dev_instance: the client data object
- * @regs: snapshot of processor context
*
* The interrupt handler does all of the Rx thread work,
* and cleans up after the Tx thread
* This routine has a simple purpose -- make the SMC chip generate an
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
*/
-static int __init smc911x_findirq(struct net_device *dev)
+static int __devinit smc911x_findirq(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc911x_probe(struct net_device *dev)
+static int __devinit smc911x_probe(struct net_device *dev)
{
struct smc911x_local *lp = netdev_priv(dev);
int i, retval;
* 0 --> there is a device
* anything else, error
*/
-static int smc911x_drv_probe(struct platform_device *pdev)
+static int __devinit smc911x_drv_probe(struct platform_device *pdev)
{
#ifdef SMC_DYNAMIC_BUS_CONFIG
struct smc911x_platdata *pd = pdev->dev.platform_data;
return ret;
}
-static int smc911x_drv_remove(struct platform_device *pdev)
+static int __devexit smc911x_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc911x_local *lp = netdev_priv(ndev);
static struct platform_driver smc911x_driver = {
.probe = smc911x_drv_probe,
- .remove = smc911x_drv_remove,
+ .remove = __devexit_p(smc911x_drv_remove),
.suspend = smc911x_drv_suspend,
.resume = smc911x_drv_resume,
.driver = {
* I just deleted auto_irq.c, since it was never built...
* --jgarzik
*/
-static int __init smc_findirq(struct smc_local *lp)
+static int __devinit smc_findirq(struct smc_local *lp)
{
void __iomem *ioaddr = lp->base;
int timeout = 20;
* o actually GRAB the irq.
* o GRAB the region
*/
-static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
+static int __devinit smc_probe(struct net_device *dev, void __iomem *ioaddr,
unsigned long irq_flags)
{
struct smc_local *lp = netdev_priv(dev);
* 0 --> there is a device
* anything else, error
*/
-static int smc_drv_probe(struct platform_device *pdev)
+static int __devinit smc_drv_probe(struct platform_device *pdev)
{
struct smc91x_platdata *pd = pdev->dev.platform_data;
struct smc_local *lp;
return ret;
}
-static int smc_drv_remove(struct platform_device *pdev)
+static int __devexit smc_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
struct smc_local *lp = netdev_priv(ndev);
static struct platform_driver smc_driver = {
.probe = smc_drv_probe,
- .remove = smc_drv_remove,
+ .remove = __devexit_p(smc_drv_remove),
.suspend = smc_drv_suspend,
.resume = smc_drv_resume,
.driver = {
/**
* spider_net_prepare_tx_descr - fill tx descriptor with skb data
* @card: card structure
- * @descr: descriptor structure to fill out
* @skb: packet to use
*
* returns 0 on success, <0 on failure.
/**
* spider_net_kick_tx_dma - enables TX DMA processing
* @card: card structure
- * @descr: descriptor address to enable TX processing at
*
* This routine will start the transmit DMA running if
* it is not already running. This routine ned only be
* spider_net_interrupt - interrupt handler for spider_net
* @irq: interrupt number
* @ptr: pointer to net_device
- * @regs: PU registers
*
* returns IRQ_HANDLED, if interrupt was for driver, or IRQ_NONE, if no
* interrupt found raised by card.
/**
* spider_net_setup_pci_dev - sets up the device in terms of PCI operations
- * @card: card structure
* @pdev: PCI device
*
* Returns the card structure or NULL if any errors occur
desc->status = 0;
np->rx_done = (np->rx_done + 1) % DONE_Q_SIZE;
}
+
+ if (*quota == 0) { /* out of rx quota */
+ retcode = 1;
+ goto out;
+ }
writew(np->rx_done, np->base + CompletionQConsumerIdx);
out:
return NETDEV_TX_OK;
}
+static void gem_pcs_reset(struct gem *gp)
+{
+ int limit;
+ u32 val;
+
+ /* Reset PCS unit. */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= PCS_MIICTRL_RST;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ limit = 32;
+ while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
+ udelay(100);
+ if (limit-- <= 0)
+ break;
+ }
+ if (limit <= 0)
+ printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
+ gp->dev->name);
+}
+
+static void gem_pcs_reinit_adv(struct gem *gp)
+{
+ u32 val;
+
+ /* Make sure PCS is disabled while changing advertisement
+ * configuration.
+ */
+ val = readl(gp->regs + PCS_CFG);
+ val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Advertise all capabilities except assymetric
+ * pause.
+ */
+ val = readl(gp->regs + PCS_MIIADV);
+ val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
+ PCS_MIIADV_SP | PCS_MIIADV_AP);
+ writel(val, gp->regs + PCS_MIIADV);
+
+ /* Enable and restart auto-negotiation, disable wrapback/loopback,
+ * and re-enable PCS.
+ */
+ val = readl(gp->regs + PCS_MIICTRL);
+ val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
+ val &= ~PCS_MIICTRL_WB;
+ writel(val, gp->regs + PCS_MIICTRL);
+
+ val = readl(gp->regs + PCS_CFG);
+ val |= PCS_CFG_ENABLE;
+ writel(val, gp->regs + PCS_CFG);
+
+ /* Make sure serialink loopback is off. The meaning
+ * of this bit is logically inverted based upon whether
+ * you are in Serialink or SERDES mode.
+ */
+ val = readl(gp->regs + PCS_SCTRL);
+ if (gp->phy_type == phy_serialink)
+ val &= ~PCS_SCTRL_LOOP;
+ else
+ val |= PCS_SCTRL_LOOP;
+ writel(val, gp->regs + PCS_SCTRL);
+}
+
#define STOP_TRIES 32
/* Must be invoked under gp->lock and gp->tx_lock. */
if (limit <= 0)
printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
+
+ if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
+ gem_pcs_reinit_adv(gp);
}
/* Must be invoked under gp->lock and gp->tx_lock. */
gp->phy_type == phy_serdes) {
u32 pcs_lpa = readl(gp->regs + PCS_MIILP);
- if (pcs_lpa & PCS_MIIADV_FD)
+ if ((pcs_lpa & PCS_MIIADV_FD) || gp->phy_type == phy_serdes)
full_duplex = 1;
speed = SPEED_1000;
}
val = readl(gp->regs + PCS_MIISTAT);
if ((val & PCS_MIISTAT_LS) != 0) {
+ if (gp->lstate == link_up)
+ goto restart;
+
gp->lstate = link_up;
netif_carrier_on(gp->dev);
(void)gem_set_link_modes(gp);
if (gp->phy_mii.def && gp->phy_mii.def->ops->init)
gp->phy_mii.def->ops->init(&gp->phy_mii);
} else {
- u32 val;
- int limit;
-
- /* Reset PCS unit. */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= PCS_MIICTRL_RST;
- writeb(val, gp->regs + PCS_MIICTRL);
-
- limit = 32;
- while (readl(gp->regs + PCS_MIICTRL) & PCS_MIICTRL_RST) {
- udelay(100);
- if (limit-- <= 0)
- break;
- }
- if (limit <= 0)
- printk(KERN_WARNING "%s: PCS reset bit would not clear.\n",
- gp->dev->name);
-
- /* Make sure PCS is disabled while changing advertisement
- * configuration.
- */
- val = readl(gp->regs + PCS_CFG);
- val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
- writel(val, gp->regs + PCS_CFG);
-
- /* Advertise all capabilities except assymetric
- * pause.
- */
- val = readl(gp->regs + PCS_MIIADV);
- val |= (PCS_MIIADV_FD | PCS_MIIADV_HD |
- PCS_MIIADV_SP | PCS_MIIADV_AP);
- writel(val, gp->regs + PCS_MIIADV);
-
- /* Enable and restart auto-negotiation, disable wrapback/loopback,
- * and re-enable PCS.
- */
- val = readl(gp->regs + PCS_MIICTRL);
- val |= (PCS_MIICTRL_RAN | PCS_MIICTRL_ANE);
- val &= ~PCS_MIICTRL_WB;
- writel(val, gp->regs + PCS_MIICTRL);
-
- val = readl(gp->regs + PCS_CFG);
- val |= PCS_CFG_ENABLE;
- writel(val, gp->regs + PCS_CFG);
-
- /* Make sure serialink loopback is off. The meaning
- * of this bit is logically inverted based upon whether
- * you are in Serialink or SERDES mode.
- */
- val = readl(gp->regs + PCS_SCTRL);
- if (gp->phy_type == phy_serialink)
- val &= ~PCS_SCTRL_LOOP;
- else
- val |= PCS_SCTRL_LOOP;
- writel(val, gp->regs + PCS_SCTRL);
+ gem_pcs_reset(gp);
+ gem_pcs_reinit_adv(gp);
}
/* Default aneg parameters */
cmd->speed = 0;
cmd->duplex = cmd->port = cmd->phy_address =
cmd->transceiver = cmd->autoneg = 0;
+
+ /* serdes means usually a Fibre connector, with most fixed */
+ if (gp->phy_type == phy_serdes) {
+ cmd->port = PORT_FIBRE;
+ cmd->supported = (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE | SUPPORTED_Autoneg |
+ SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+ cmd->advertising = cmd->supported;
+ cmd->transceiver = XCVR_INTERNAL;
+ if (gp->lstate == link_up)
+ cmd->speed = SPEED_1000;
+ cmd->duplex = DUPLEX_FULL;
+ cmd->autoneg = 1;
+ }
}
cmd->maxtxpkt = cmd->maxrxpkt = 0;
dma_addr_t tail_list_phys;
u8 *tail_buffer;
unsigned long flags;
+ unsigned int txlen;
if ( ! priv->phyOnline ) {
TLAN_DBG( TLAN_DEBUG_TX, "TRANSMIT: %s PHY is not ready\n",
if (skb_padto(skb, TLAN_MIN_FRAME_SIZE))
return 0;
+ txlen = max(skb->len, (unsigned int)TLAN_MIN_FRAME_SIZE);
tail_list = priv->txList + priv->txTail;
tail_list_phys = priv->txListDMA + sizeof(TLanList) * priv->txTail;
if ( bbuf ) {
tail_buffer = priv->txBuffer + ( priv->txTail * TLAN_MAX_FRAME_SIZE );
- skb_copy_from_linear_data(skb, tail_buffer, skb->len);
+ skb_copy_from_linear_data(skb, tail_buffer, txlen);
} else {
tail_list->buffer[0].address = pci_map_single(priv->pciDev,
- skb->data, skb->len,
+ skb->data, txlen,
PCI_DMA_TODEVICE);
TLan_StoreSKB(tail_list, skb);
}
- tail_list->frameSize = (u16) skb->len;
- tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) skb->len;
+ tail_list->frameSize = (u16) txlen;
+ tail_list->buffer[0].count = TLAN_LAST_BUFFER | (u32) txlen;
tail_list->buffer[1].count = 0;
tail_list->buffer[1].address = 0;
if ( ! bbuf ) {
struct sk_buff *skb = TLan_GetSKB(head_list);
pci_unmap_single(priv->pciDev, head_list->buffer[0].address,
- skb->len, PCI_DMA_TODEVICE);
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
head_list->buffer[8].address = 0;
head_list->buffer[9].address = 0;
list = priv->txList + i;
skb = TLan_GetSKB(list);
if ( skb ) {
- pci_unmap_single(priv->pciDev,
- list->buffer[0].address, skb->len,
- PCI_DMA_TODEVICE);
+ pci_unmap_single(
+ priv->pciDev,
+ list->buffer[0].address,
+ max(skb->len,
+ (unsigned int)TLAN_MIN_FRAME_SIZE),
+ PCI_DMA_TODEVICE);
dev_kfree_skb_any( skb );
list->buffer[8].address = 0;
list->buffer[9].address = 0;
static void ath5k_reset_tsf(struct ieee80211_hw *hw);
static int ath5k_beacon_update(struct ieee80211_hw *hw,
struct sk_buff *skb);
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes);
static struct ieee80211_ops ath5k_hw_ops = {
.tx = ath5k_tx,
.get_tx_stats = ath5k_get_tx_stats,
.get_tsf = ath5k_get_tsf,
.reset_tsf = ath5k_reset_tsf,
+ .bss_info_changed = ath5k_bss_info_changed,
};
/*
sc->opmode != NL80211_IFTYPE_MESH_POINT &&
test_bit(ATH_STAT_PROMISC, sc->status))
rfilt |= AR5K_RX_FILTER_PROM;
- if (sc->opmode == NL80211_IFTYPE_STATION ||
+ if ((sc->opmode == NL80211_IFTYPE_STATION && sc->assoc) ||
sc->opmode == NL80211_IFTYPE_ADHOC) {
rfilt |= AR5K_RX_FILTER_BEACON;
}
end:
return ret;
}
+static void
+set_beacon_filter(struct ieee80211_hw *hw, bool enable)
+{
+ struct ath5k_softc *sc = hw->priv;
+ struct ath5k_hw *ah = sc->ah;
+ u32 rfilt;
+ rfilt = ath5k_hw_get_rx_filter(ah);
+ if (enable)
+ rfilt |= AR5K_RX_FILTER_BEACON;
+ else
+ rfilt &= ~AR5K_RX_FILTER_BEACON;
+ ath5k_hw_set_rx_filter(ah, rfilt);
+ sc->filter_flags = rfilt;
+}
+static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_bss_conf *bss_conf,
+ u32 changes)
+{
+ struct ath5k_softc *sc = hw->priv;
+ if (changes & BSS_CHANGED_ASSOC) {
+ mutex_lock(&sc->lock);
+ sc->assoc = bss_conf->assoc;
+ if (sc->opmode == NL80211_IFTYPE_STATION)
+ set_beacon_filter(hw, sc->assoc);
+ mutex_unlock(&sc->lock);
+ }
+}
struct timer_list calib_tim; /* calibration timer */
int power_level; /* Requested tx power in dbm */
+ bool assoc; /* assocate state */
};
#define ath5k_hw_hasbssidmask(_ah) \
sc->debug.debugfs_phydir = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
ath5k_global_debugfs);
- sc->debug.debugfs_debug = debugfs_create_file("debug", 0666,
+ sc->debug.debugfs_debug = debugfs_create_file("debug", S_IWUSR | S_IRUGO,
sc->debug.debugfs_phydir, sc, &fops_debug);
- sc->debug.debugfs_registers = debugfs_create_file("registers", 0444,
+ sc->debug.debugfs_registers = debugfs_create_file("registers", S_IRUGO,
sc->debug.debugfs_phydir, sc, &fops_registers);
- sc->debug.debugfs_tsf = debugfs_create_file("tsf", 0666,
+ sc->debug.debugfs_tsf = debugfs_create_file("tsf", S_IWUSR | S_IRUGO,
sc->debug.debugfs_phydir, sc, &fops_tsf);
- sc->debug.debugfs_beacon = debugfs_create_file("beacon", 0666,
+ sc->debug.debugfs_beacon = debugfs_create_file("beacon", S_IWUSR | S_IRUGO,
sc->debug.debugfs_phydir, sc, &fops_beacon);
- sc->debug.debugfs_reset = debugfs_create_file("reset", 0222,
+ sc->debug.debugfs_reset = debugfs_create_file("reset", S_IWUSR,
sc->debug.debugfs_phydir, sc, &fops_reset);
}
skb = (struct sk_buff *)bf->bf_mpdu;
if (skb) {
pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb_end_pointer(skb) - skb->head,
+ skb->len,
PCI_DMA_TODEVICE);
}
bf->bf_buf_addr = bf->bf_dmacontext =
pci_map_single(sc->pdev, skb->data,
- skb_end_pointer(skb) - skb->head,
+ skb->len,
PCI_DMA_TODEVICE);
skb = ieee80211_get_buffered_bc(sc->hw, avp->av_if_data);
if (bf->bf_mpdu != NULL) {
skb = (struct sk_buff *)bf->bf_mpdu;
pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb_end_pointer(skb) - skb->head,
+ skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
bf->bf_buf_addr = bf->bf_dmacontext =
pci_map_single(sc->pdev, skb->data,
- skb_end_pointer(skb) - skb->head,
+ skb->len,
PCI_DMA_TODEVICE);
bf->bf_mpdu = skb;
if (bf->bf_mpdu != NULL) {
struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
pci_unmap_single(sc->pdev, bf->bf_dmacontext,
- skb_end_pointer(skb) - skb->head,
+ skb->len,
PCI_DMA_TODEVICE);
dev_kfree_skb_any(skb);
bf->bf_mpdu = NULL;
ASSERT(skb != NULL);
ds->ds_vdata = skb->data;
- /* setup rx descriptors */
+ /* setup rx descriptors. The sc_rxbufsize here tells the harware
+ * how much data it can DMA to us and that we are prepared
+ * to process */
ath9k_hw_setuprxdesc(ah,
ds,
- skb_tailroom(skb), /* buffer size */
+ sc->sc_rxbufsize,
0);
if (sc->sc_rxlink == NULL)
* in rx'd frames.
*/
+ /* Note: the kernel can allocate a value greater than
+ * what we ask it to give us. We really only need 4 KB as that
+ * is this hardware supports and in fact we need at least 3849
+ * as that is the MAX AMSDU size this hardware supports.
+ * Unfortunately this means we may get 8 KB here from the
+ * kernel... and that is actually what is observed on some
+ * systems :( */
skb = dev_alloc_skb(len + sc->sc_cachelsz - 1);
if (skb != NULL) {
off = ((unsigned long) skb->data) % sc->sc_cachelsz;
if (nskb != NULL) {
bf->bf_mpdu = nskb;
bf->bf_buf_addr = pci_map_single(sc->pdev, nskb->data,
- skb_end_pointer(nskb) - nskb->head,
+ sc->sc_rxbufsize,
PCI_DMA_FROMDEVICE);
bf->bf_dmacontext = bf->bf_buf_addr;
ATH_RX_CONTEXT(nskb)->ctx_rxbuf = bf;
bf->bf_mpdu = skb;
bf->bf_buf_addr = pci_map_single(sc->pdev, skb->data,
- skb_end_pointer(skb) - skb->head,
+ sc->sc_rxbufsize,
PCI_DMA_FROMDEVICE);
bf->bf_dmacontext = bf->bf_buf_addr;
ATH_RX_CONTEXT(skb)->ctx_rxbuf = bf;
pci_dma_sync_single_for_cpu(sc->pdev,
bf->bf_buf_addr,
- skb_tailroom(skb),
+ sc->sc_rxbufsize,
PCI_DMA_FROMDEVICE);
pci_unmap_single(sc->pdev,
bf->bf_buf_addr,
if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
return 0;
ipw_send_disassociate(data, 0);
+ netif_carrier_off(priv->net_dev);
return 1;
}
u16 remaining_bytes;
int fc;
+ if (!(priv->status & STATUS_ASSOCIATED))
+ goto drop;
+
hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
switch (priv->ieee->iw_mode) {
case IW_MODE_ADHOC:
rxq->queue[i] = NULL;
- pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->aligned_dma_addr,
- priv->hw_params.rx_buf_size,
- PCI_DMA_FROMDEVICE);
+ dma_sync_single_range_for_cpu(
+ &priv->pci_dev->dev, rxb->real_dma_addr,
+ rxb->aligned_dma_addr - rxb->real_dma_addr,
+ priv->hw_params.rx_buf_size,
+ PCI_DMA_FROMDEVICE);
pkt = (struct iwl_rx_packet *)rxb->skb->data;
/* Reclaim a command buffer only if this packet is a response
priv->num_stations = 0;
memset(priv->stations, 0, sizeof(priv->stations));
+ /* clean ucode key table bit map */
+ priv->ucode_key_table = 0;
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
}
EXPORT_SYMBOL(iwl_clear_stations_table);
if (!test_and_set_bit(i, &priv->ucode_key_table))
return i;
- return -1;
+ return WEP_INVALID_OFFSET;
}
int iwl_send_static_wepkey_cmd(struct iwl_priv *priv, u8 send_if_empty)
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
{
unsigned long flags;
__le16 key_flags = 0;
+ int ret;
key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ ret = iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+
spin_unlock_irqrestore(&priv->sta_lock, flags);
- IWL_DEBUG_INFO("hwcrypto: modify ucode station key info\n");
- return iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
+ return ret;
}
static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
/* else, we are overriding an existing key => no need to allocated room
* in uCode. */
+ WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for new kew");
+
/* This copy is acutally not needed: we get the key with each TX */
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
return 0;
}
+ if (priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+ IWL_WARNING("Removing wrong key %d 0x%x\n",
+ keyconf->keyidx, key_flags);
+ spin_unlock_irqrestore(&priv->sta_lock, flags);
+ return 0;
+ }
+
if (!test_and_clear_bit(priv->stations[sta_id].sta.key.key_offset,
&priv->ucode_key_table))
IWL_ERROR("index %d not used in uCode key table.\n",
struct ieee80211_hdr *tx_hdr;
tx_hdr = (struct ieee80211_hdr *)skb->data;
- if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1)))
+ if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
{
__skb_unlink(skb, q);
tx_status(hw, skb, IEEE80211_TX_STAT_ACK, stats->signal, 1);
return 0;
}
-static struct xenbus_driver netfront = {
+static struct xenbus_driver netfront_driver = {
.name = "vif",
.owner = THIS_MODULE,
.ids = netfront_ids,
printk(KERN_INFO "Initialising Xen virtual ethernet driver.\n");
- return xenbus_register_frontend(&netfront);
+ return xenbus_register_frontend(&netfront_driver);
}
module_init(netif_init);
if (xen_initial_domain())
return;
- xenbus_unregister_driver(&netfront);
+ xenbus_unregister_driver(&netfront_driver);
}
module_exit(netif_exit);
* parallel ports and <S> is the number of serial ports.
*/
card->numports = (dev->subsystem_device & 0xf0) >> 4;
+ if (card->numports > ARRAY_SIZE(card->addr))
+ card->numports = ARRAY_SIZE(card->addr);
return 0;
}
u8 device; /* pci device# */
- u32 sun; /* ACPI _SUN (slot unique number) */
+ unsigned long long sun; /* ACPI _SUN (slot unique number) */
u32 flags; /* see below */
};
slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN;
acpiphp_slot->slot = slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun);
+ snprintf(name, SLOT_NAME_SIZE, "%llu", slot->acpi_slot->sun);
retval = pci_hp_register(slot->hotplug_slot,
acpiphp_slot->bridge->pci_bus,
bridge->nr_slots++;
- dbg("found ACPI PCI Hotplug slot %d at PCI %04x:%02x:%02x\n",
+ dbg("found ACPI PCI Hotplug slot %llu at PCI %04x:%02x:%02x\n",
slot->sun, pci_domain_nr(bridge->pci_bus),
bridge->pci_bus->number, slot->device);
retval = acpiphp_register_hotplug_slot(slot);
if (retval) {
if (retval == -EBUSY)
- warn("Slot %d already registered by another "
+ warn("Slot %llu already registered by another "
"hotplug driver\n", slot->sun);
else
warn("acpiphp_register_hotplug_slot failed "
goto error;
}
- /* lock ourselves into memory with a module
- * count of -1 so that no one can unload us. */
- module_put(THIS_MODULE);
-
exit:
return rc;
}
module_init(ibmphp_init);
-module_exit(ibmphp_exit);
goto err_out_release_ctlr;
}
+ /* Check if slot is occupied */
t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
- t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
- if (value && pciehp_force) {
- rc = pciehp_enable_slot(t_slot);
- if (rc) /* -ENODEV: shouldn't happen, but deal with it */
- value = 0;
- }
- if ((POWER_CTRL(ctrl)) && !value) {
- rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
- if (rc)
- goto err_out_free_ctrl_slot;
+ t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+ if (value) {
+ if (pciehp_force)
+ pciehp_enable_slot(t_slot);
+ } else {
+ /* Power off slot if not occupied */
+ if (POWER_CTRL(ctrl)) {
+ rc = t_slot->hpc_ops->power_off_slot(t_slot);
+ if (rc)
+ goto err_out_free_ctrl_slot;
+ }
}
return 0;
return 0;
}
-static int __devinit pci_setup(char *str)
+static int __init pci_setup(char *str)
{
while (str) {
char *k = strchr(str, ',');
if (!dev->driver ||
!dev->driver->err_handler ||
- !dev->driver->err_handler->slot_reset)
+ !dev->driver->err_handler->resume)
return;
err_handler = dev->driver->err_handler;
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/jiffies.h>
#include <linux/pci-aspm.h>
#include "../pci.h"
*/
static void pcie_aspm_configure_common_clock(struct pci_dev *pdev)
{
- int pos, child_pos;
+ int pos, child_pos, i = 0;
u16 reg16 = 0;
struct pci_dev *child_dev;
int same_clock = 1;
-
+ unsigned long start_jiffies;
+ u16 child_regs[8], parent_reg;
/*
* all functions of a slot should have the same Slot Clock
* Configuration, so just check one function
child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
pci_read_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
®16);
+ child_regs[i] = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
reg16 &= ~PCI_EXP_LNKCTL_CCC;
pci_write_config_word(child_dev, child_pos + PCI_EXP_LNKCTL,
reg16);
+ i++;
}
/* Configure upstream component */
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ parent_reg = reg16;
if (same_clock)
reg16 |= PCI_EXP_LNKCTL_CCC;
else
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
/* Wait for link training end */
- while (1) {
+ /* break out after waiting for 1 second */
+ start_jiffies = jiffies;
+ while ((jiffies - start_jiffies) < HZ) {
pci_read_config_word(pdev, pos + PCI_EXP_LNKSTA, ®16);
if (!(reg16 & PCI_EXP_LNKSTA_LT))
break;
cpu_relax();
}
+ /* training failed -> recover */
+ if ((jiffies - start_jiffies) >= HZ) {
+ dev_printk (KERN_ERR, &pdev->dev, "ASPM: Could not configure"
+ " common clock\n");
+ i = 0;
+ list_for_each_entry(child_dev, &pdev->subordinate->devices,
+ bus_list) {
+ child_pos = pci_find_capability(child_dev,
+ PCI_CAP_ID_EXP);
+ pci_write_config_word(child_dev,
+ child_pos + PCI_EXP_LNKCTL,
+ child_regs[i]);
+ i++;
+ }
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, parent_reg);
+ }
}
/*
#include <linux/delay.h>
#include <linux/acpi.h>
#include <linux/kallsyms.h>
+#include <linux/dmi.h>
#include "pci.h"
int isa_dma_bridge_buggy;
PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
ht_enable_msi_mapping);
+/* The P5N32-SLI Premium motherboard from Asus has a problem with msi
+ * for the MCP55 NIC. It is not yet determined whether the msi problem
+ * also affects other devices. As for now, turn off msi for this device.
+ */
+static void __devinit nvenet_msi_disable(struct pci_dev *dev)
+{
+ if (dmi_name_in_vendors("P5N32-SLI PREMIUM")) {
+ dev_info(&dev->dev,
+ "Disabling msi for MCP55 NIC on P5N32-SLI Premium\n");
+ dev->no_msi = 1;
+ }
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA,
+ PCI_DEVICE_ID_NVIDIA_NVENET_15,
+ nvenet_msi_disable);
+
static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
__func__, pci_domain_nr(parent), parent->number, slot_nr);
out:
+ kfree(slot_name);
up_write(&pci_bus_sem);
return slot;
err:
module_init(bfin_cf_init);
module_exit(bfin_cf_exit);
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>")
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("BFIN CF/PCMCIA Driver");
MODULE_LICENSE("GPL");
* link, then start recursive peer enumeration. Returns %0 if
* enumeration succeeds or %-EBUSY if enumeration fails.
*/
-int rio_enum_mport(struct rio_mport *mport)
+int __devinit rio_enum_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int rc = 0;
* peer discovery. Returns %0 if discovery succeeds or %-EBUSY
* on failure.
*/
-int rio_disc_mport(struct rio_mport *mport)
+int __devinit rio_disc_mport(struct rio_mport *mport)
{
struct rio_net *net = NULL;
int enum_timeout_flag = 0;
device_initcall(rio_init);
-int rio_init_mports(void)
+int __devinit rio_init_mports(void)
{
int rc = 0;
struct rio_mport *port;
return err;
}
+static struct i2c_device_id ds1672_id[] = {
+ { "ds1672", 0 },
+ { }
+};
+
static struct i2c_driver ds1672_driver = {
.driver = {
.name = "rtc-ds1672",
},
.probe = &ds1672_probe,
.remove = &ds1672_remove,
+ .id_table = ds1672_id,
};
static int __init ds1672_init(void)
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
+ /* The clock has an 8 bit wide bcd-coded register (they never learn)
+ * for the year. tm_year is an offset from 1900 and we are interested
+ * in the 2000-2099 range, so any value less than 100 is invalid.
+ */
+ if (tm->tm_year < 100)
+ return -EINVAL;
+
regs[ISL1208_REG_SC] = bin2bcd(tm->tm_sec);
regs[ISL1208_REG_MN] = bin2bcd(tm->tm_min);
regs[ISL1208_REG_HR] = bin2bcd(tm->tm_hour) | ISL1208_REG_HR_MIL;
return 0;
}
+static struct i2c_device_id max6900_id[] = {
+ { "max6900", 0 },
+ { }
+};
+
static struct i2c_driver max6900_driver = {
.driver = {
.name = "rtc-max6900",
},
.probe = max6900_probe,
.remove = max6900_remove,
+ .id_table = max6900_id,
};
static int __init max6900_init(void)
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/time.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
MODULE_DESCRIPTION("Starfire RTC driver");
MODULE_LICENSE("GPL");
-struct starfire_rtc {
- struct rtc_device *rtc;
- spinlock_t lock;
-};
-
static u32 starfire_get_time(void)
{
static char obp_gettod[32];
static int starfire_read_time(struct device *dev, struct rtc_time *tm)
{
- struct starfire_rtc *p = dev_get_drvdata(dev);
- unsigned long flags, secs;
-
- spin_lock_irqsave(&p->lock, flags);
- secs = starfire_get_time();
- spin_unlock_irqrestore(&p->lock, flags);
-
- rtc_time_to_tm(secs, tm);
-
- return 0;
-}
-
-static int starfire_set_time(struct device *dev, struct rtc_time *tm)
-{
- unsigned long secs;
- int err;
-
- err = rtc_tm_to_time(tm, &secs);
- if (err)
- return err;
-
- /* Do nothing, time is set using the service processor
- * console on this platform.
- */
- return 0;
+ rtc_time_to_tm(starfire_get_time(), tm);
+ return rtc_valid_tm(tm);
}
static const struct rtc_class_ops starfire_rtc_ops = {
.read_time = starfire_read_time,
- .set_time = starfire_set_time,
};
-static int __devinit starfire_rtc_probe(struct platform_device *pdev)
+static int __init starfire_rtc_probe(struct platform_device *pdev)
{
- struct starfire_rtc *p = kzalloc(sizeof(*p), GFP_KERNEL);
-
- if (!p)
- return -ENOMEM;
+ struct rtc_device *rtc = rtc_device_register("starfire", &pdev->dev,
+ &starfire_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
- spin_lock_init(&p->lock);
+ platform_set_drvdata(pdev, rtc);
- p->rtc = rtc_device_register("starfire", &pdev->dev,
- &starfire_rtc_ops, THIS_MODULE);
- if (IS_ERR(p->rtc)) {
- int err = PTR_ERR(p->rtc);
- kfree(p);
- return err;
- }
- platform_set_drvdata(pdev, p);
return 0;
}
-static int __devexit starfire_rtc_remove(struct platform_device *pdev)
+static int __exit starfire_rtc_remove(struct platform_device *pdev)
{
- struct starfire_rtc *p = platform_get_drvdata(pdev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
- rtc_device_unregister(p->rtc);
- kfree(p);
+ rtc_device_unregister(rtc);
return 0;
}
.name = "rtc-starfire",
.owner = THIS_MODULE,
},
- .probe = starfire_rtc_probe,
- .remove = __devexit_p(starfire_rtc_remove),
+ .remove = __exit_p(starfire_rtc_remove),
};
static int __init starfire_rtc_init(void)
{
- return platform_driver_register(&starfire_rtc_driver);
+ return platform_driver_probe(&starfire_rtc_driver, starfire_rtc_probe);
}
static void __exit starfire_rtc_exit(void)
}
#else
-#define omap_rtc_ioctl NULL
+#define twl4030_rtc_ioctl NULL
#endif
static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
goto failed_openfcp;
atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &act->adapter->status);
- schedule_work(&act->adapter->scan_work);
return ZFCP_ERP_SUCCEEDED;
container_of(work, struct zfcp_erp_add_work, work);
struct zfcp_unit *unit = p->unit;
struct fc_rport *rport = unit->port->rport;
- scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+
+ if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+ scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
zfcp_unit_put(unit);
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
if (result != ZFCP_ERP_SUCCEEDED)
zfcp_erp_rports_del(adapter);
+ else
+ schedule_work(&adapter->scan_work);
zfcp_adapter_put(adapter);
break;
}
if (mutex_lock_interruptible(&wka_port->mutex))
return -ERESTARTSYS;
- if (wka_port->status != ZFCP_WKA_PORT_ONLINE) {
+ if (wka_port->status == ZFCP_WKA_PORT_OFFLINE ||
+ wka_port->status == ZFCP_WKA_PORT_CLOSING) {
wka_port->status = ZFCP_WKA_PORT_OPENING;
if (zfcp_fsf_open_wka_port(wka_port))
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
read_lock_irqsave(&zfcp_data.config_lock, flags);
list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
- /* FIXME: ZFCP_STATUS_PORT_DID_DID check is racy */
- if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_DID_DID))
+ if (!(atomic_read(&port->status) & ZFCP_STATUS_PORT_PHYS_OPEN))
/* Try to connect to unused ports anyway. */
zfcp_erp_port_reopen(port,
ZFCP_STATUS_COMMON_ERP_FAILED,
int ret, i;
struct zfcp_gpn_ft *gpn_ft;
- zfcp_erp_wait(adapter); /* wait until adapter is finished with ERP */
if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
return 0;
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
req_flags, adapter->pool.fsf_req_abort);
- if (IS_ERR(req))
+ if (IS_ERR(req)) {
+ req = NULL;
goto out;
+ }
if (unlikely(!(atomic_read(&unit->status) &
ZFCP_STATUS_COMMON_UNBLOCKED)))
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
break;
case FSF_PORT_ALREADY_OPEN:
+ break;
case FSF_GOOD:
wka_port->handle = header->port_handle;
wka_port->status = ZFCP_WKA_PORT_ONLINE;
static void zfcp_fsf_send_fcp_command_task_handler(struct zfcp_fsf_req *req)
{
- struct scsi_cmnd *scpnt = req->data;
+ struct scsi_cmnd *scpnt;
struct fcp_rsp_iu *fcp_rsp_iu = (struct fcp_rsp_iu *)
&(req->qtcb->bottom.io.fcp_rsp);
u32 sns_len;
char *fcp_rsp_info = (unsigned char *) &fcp_rsp_iu[1];
unsigned long flags;
- if (unlikely(!scpnt))
- return;
-
read_lock_irqsave(&req->adapter->abort_lock, flags);
+ scpnt = req->data;
+ if (unlikely(!scpnt)) {
+ read_unlock_irqrestore(&req->adapter->abort_lock, flags);
+ return;
+ }
+
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ABORTED)) {
set_host_byte(scpnt, DID_SOFT_ERROR);
set_driver_byte(scpnt, SUGGEST_RETRY);
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (IS_ERR(req))
+ if (IS_ERR(req)) {
+ req = NULL;
goto out;
+ }
req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
req->data = unit;
ret = zfcp_fsf_send_fcp_command_task(adapter, unit, scpnt, 0,
ZFCP_REQ_AUTO_CLEANUP);
if (unlikely(ret == -EBUSY))
- zfcp_scsi_command_fail(scpnt, DID_NO_CONNECT);
+ return SCSI_MLQUEUE_DEVICE_BUSY;
else if (unlikely(ret < 0))
return SCSI_MLQUEUE_HOST_BUSY;
{ aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */
{ aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */
- { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2120S (Crusader) */
- { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
{ aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */
{ aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */
{ aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */
* Firmware has an individual device recovery time typically
* of 35 seconds, give us a margin.
*/
- if (sdev->timeout < (45 * HZ))
- sdev->timeout = 45 * HZ;
+ if (sdev->request_queue->rq_timeout < (45 * HZ))
+ blk_queue_rq_timeout(sdev->request_queue, 45*HZ);
for (cid = 0; cid < aac->maximum_num_containers; ++cid)
if (aac->fsa_dev[cid].valid)
++num_lsu;
advansys_wide_free_mem(boardp);
free_irq(boardp->irq, shost);
err_free_dma:
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA)
free_dma(shost->dma_channel);
+#endif
err_free_proc:
kfree(boardp->prtbuf);
err_unmap:
ASC_DBG(1, "begin\n");
scsi_remove_host(shost);
free_irq(board->irq, shost);
+#ifdef CONFIG_ISA
if (shost->dma_channel != NO_ISA_DMA) {
ASC_DBG(1, "free_dma()\n");
free_dma(shost->dma_channel);
}
+#endif
if (ASC_NARROW_BOARD(board)) {
dma_unmap_single(board->dev,
board->dvc_var.asc_dvc_var.overrun_dma,
struct request *req;
int ret;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
req->sense_len = 0;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
h->path_state = HP_SW_PATH_ACTIVE;
ret = SCSI_DH_OK;
}
- if (ret == SCSI_DH_IMM_RETRY)
+ if (ret == SCSI_DH_IMM_RETRY) {
+ blk_put_request(req);
goto retry;
+ }
if (ret == SCSI_DH_DEV_OFFLINED) {
h->path_state = HP_SW_PATH_PASSIVE;
ret = SCSI_DH_OK;
struct request *req;
int ret, retry;
+retry:
req = blk_get_request(sdev->request_queue, WRITE, GFP_NOIO);
if (!req)
return SCSI_DH_RES_TEMP_UNAVAIL;
req->sense_len = 0;
retry = h->retries;
-retry:
ret = blk_execute_rq(req->q, NULL, req, 1);
if (ret == -EIO) {
if (req->sense_len > 0) {
ret = SCSI_DH_OK;
if (ret == SCSI_DH_RETRY) {
- if (--retry)
+ if (--retry) {
+ blk_put_request(req);
goto retry;
+ }
ret = SCSI_DH_IO;
}
.remove = gdth_pci_remove_one,
};
-static void gdth_pci_remove_one(struct pci_dev *pdev)
+static void __devexit gdth_pci_remove_one(struct pci_dev *pdev)
{
gdth_ha_str *ha = pci_get_drvdata(pdev);
pci_disable_device(pdev);
}
-static int gdth_pci_init_one(struct pci_dev *pdev,
+static int __devinit gdth_pci_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
ushort vendor = pdev->vendor;
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static int gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
+static int __devinit gdth_init_pci(struct pci_dev *pdev, gdth_pci_str *pcistr,
gdth_ha_str *ha)
{
register gdt6_dpram_str __iomem *dp6_ptr;
/* controller protocol functions */
-static void __init gdth_enable_int(gdth_ha_str *ha)
+static void __devinit gdth_enable_int(gdth_ha_str *ha)
{
ulong flags;
gdt2_dpram_str __iomem *dp2_ptr;
/* search for devices */
-static int __init gdth_search_drives(gdth_ha_str *ha)
+static int __devinit gdth_search_drives(gdth_ha_str *ha)
{
ushort cdev_cnt, i;
int ok;
#endif /* CONFIG_EISA */
#ifdef CONFIG_PCI
-static int gdth_pci_probe_one(gdth_pci_str *pcistr,
+static int __devinit gdth_pci_probe_one(gdth_pci_str *pcistr,
gdth_ha_str **ha_out)
{
struct Scsi_Host *shp;
spin_lock_irqsave(shost->host_lock, lock_flags);
if (sdev->type == TYPE_DISK) {
sdev->allow_restart = 1;
- sdev->timeout = 60 * HZ;
+ blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
}
scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
spin_unlock_irqrestore(shost->host_lock, lock_flags);
INIT_WORK(&vport->crq_work, handle_crq);
- err = crq_queue_create(&vport->crq_queue, target);
+ err = scsi_add_host(shost, target->dev);
if (err)
goto free_srp_target;
- err = scsi_add_host(shost, target->dev);
+ err = scsi_tgt_alloc_queue(shost);
if (err)
- goto destroy_queue;
+ goto remove_host;
- err = scsi_tgt_alloc_queue(shost);
+ err = crq_queue_create(&vport->crq_queue, target);
if (err)
- goto destroy_queue;
+ goto free_queue;
return 0;
-destroy_queue:
- crq_queue_destroy(target);
+free_queue:
+ scsi_tgt_free_queue(shost);
+remove_host:
+ scsi_remove_host(shost);
free_srp_target:
srp_target_free(target);
put_host:
if (!__kfifo_get(session->cmdpool.queue,
(void*)&task, sizeof(void*)))
return NULL;
-
- if ((hdr->opcode == (ISCSI_OP_NOOP_OUT | ISCSI_OP_IMMEDIATE)) &&
- hdr->ttt == RESERVED_ITT) {
- conn->ping_task = task;
- conn->last_ping = jiffies;
- }
}
/*
* released in complete pdu for task we expect a response for, and
task = __iscsi_conn_send_pdu(conn, (struct iscsi_hdr *)&hdr, NULL, 0);
if (!task)
iscsi_conn_printk(KERN_ERR, conn, "Could not send nopout\n");
+ else if (!rhdr) {
+ /* only track our nops */
+ conn->ping_task = task;
+ conn->last_ping = jiffies;
+ }
}
static int iscsi_handle_reject(struct iscsi_conn *conn, struct iscsi_hdr *hdr,
* The RAID firmware may require extended timeouts.
*/
if (sdev->channel >= MEGASAS_MAX_PD_CHANNELS)
- sdev->timeout = MEGASAS_DEFAULT_CMD_TIMEOUT * HZ;
+ blk_queue_rq_timeout(sdev->request_queue,
+ MEGASAS_DEFAULT_CMD_TIMEOUT * HZ);
return 0;
}
int i, rtn = NEEDS_RETRY;
for (i = 0; rtn == NEEDS_RETRY && i < 2; i++)
- rtn = scsi_send_eh_cmnd(scmd, stu_command, 6,
- scmd->device->timeout, 0);
+ rtn = scsi_send_eh_cmnd(scmd, stu_command, 6, scmd->device->request_queue->rq_timeout, 0);
if (rtn == SUCCESS)
return 0;
*/
static void scsi_run_queue(struct request_queue *q)
{
- struct scsi_device *starved_head = NULL, *sdev = q->queuedata;
+ struct scsi_device *sdev = q->queuedata;
struct Scsi_Host *shost = sdev->host;
+ LIST_HEAD(starved_list);
unsigned long flags;
if (scsi_target(sdev)->single_lun)
scsi_single_lun_run(sdev);
spin_lock_irqsave(shost->host_lock, flags);
- while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) {
+ list_splice_init(&shost->starved_list, &starved_list);
+
+ while (!list_empty(&starved_list)) {
int flagset;
/*
* scsi_request_fn must get the host_lock before checking
* or modifying starved_list or starved_entry.
*/
- sdev = list_entry(shost->starved_list.next,
- struct scsi_device, starved_entry);
- /*
- * The *queue_ready functions can add a device back onto the
- * starved list's tail, so we must check for a infinite loop.
- */
- if (sdev == starved_head)
+ if (scsi_host_is_busy(shost))
break;
- if (!starved_head)
- starved_head = sdev;
+ sdev = list_entry(starved_list.next,
+ struct scsi_device, starved_entry);
+ list_del_init(&sdev->starved_entry);
if (scsi_target_is_busy(scsi_target(sdev))) {
list_move_tail(&sdev->starved_entry,
&shost->starved_list);
continue;
}
- list_del_init(&sdev->starved_entry);
spin_unlock(shost->host_lock);
spin_lock(sdev->request_queue->queue_lock);
spin_lock(shost->host_lock);
}
+ /* put any unprocessed entries back */
+ list_splice(&starved_list, &shost->starved_list);
spin_unlock_irqrestore(shost->host_lock, flags);
blk_run_queue(q);
struct request *req = cmd->request;
unsigned long flags;
- scsi_unprep_request(req);
spin_lock_irqsave(q->queue_lock, flags);
+ scsi_unprep_request(req);
blk_requeue_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
* access to the device is prohibited.
*/
error = scsi_nonblockable_ioctl(sdp, cmd, p,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (!scsi_block_when_processing_errors(sdp) || !error)
return error;
* if it doesn't recognise the ioctl
*/
ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
- (mode & FMODE_NDELAY_NOW) != 0);
+ (mode & FMODE_NDELAY) != 0);
if (ret != -ENODEV)
return ret;
return scsi_ioctl(sdev, cmd, argp);
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
- sdev->timeout = 60 * HZ;
+ blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
sdev->tagged_supported = 1;
return 0;
return ret;
}
-static struct ioc3_submodule ioc3uart_submodule = {
+static struct ioc3_submodule ioc3uart_ops = {
.name = "IOC3uart",
.probe = ioc3uart_probe,
.remove = ioc3uart_remove,
__func__);
return ret;
}
- ret = ioc3_register_submodule(&ioc3uart_submodule);
+ ret = ioc3_register_submodule(&ioc3uart_ops);
if (ret)
uart_unregister_driver(&ioc3_uart);
return ret;
static void __devexit ioc3uart_exit(void)
{
- ioc3_unregister_submodule(&ioc3uart_submodule);
+ ioc3_unregister_submodule(&ioc3uart_ops);
uart_unregister_driver(&ioc3_uart);
}
/* Update the per-port timeout */
uart_update_timeout(port, new->c_cflag, baud);
- /* Do our best to flush TX & RX, so we don't loose anything */
- /* But we don't wait indefinitly ! */
+ /* Do our best to flush TX & RX, so we don't lose anything */
+ /* But we don't wait indefinitely ! */
j = 5000000; /* Maximum wait */
/* FIXME Can't receive chars since set_termios might be called at early
* boot for the console, all stuff is not yet ready to receive at that
MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPLi v2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:s3c2440-uart");
static int ulite_request_port(struct uart_port *port)
{
- pr_debug("ulite console: port=%p; port->mapbase=%x\n",
- port, port->mapbase);
+ pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+ port, (unsigned long long) port->mapbase);
if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
dev_err(port->dev, "Memory region busy\n");
maple_queue_cache =
kmem_cache_create("maple_queue_cache", 0x400, 0,
- SLAB_POISON|SLAB_HWCACHE_ALIGN, NULL);
+ SLAB_HWCACHE_ALIGN, NULL);
if (!maple_queue_cache)
goto cleanup_bothirqs;
dma_rx_addr = t->rx_dma;
/*
- * check if buffers are already dma mapped, map them otherwise
+ * check if buffers are already dma mapped, map them otherwise:
+ * - first map the TX buffer, so cache data gets written to memory
+ * - then map the RX buffer, so that cache entries (with
+ * soon-to-be-stale data) get removed
* use rx buffer in place of tx if tx buffer was not provided
* use temp rx buffer (preallocated or realloc to fit) for rx dma
*/
+ if (t->tx_buf) {
+ if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
+ dma_tx_addr = dma_map_single(hw->dev,
+ (void *)t->tx_buf,
+ t->len, DMA_TO_DEVICE);
+ if (dma_mapping_error(hw->dev, dma_tx_addr))
+ dev_err(hw->dev, "tx dma map error\n");
+ }
+ }
+
if (t->rx_buf) {
if (t->rx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
dma_rx_addr = dma_map_single(hw->dev,
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_FROM_DEVICE);
}
- if (t->tx_buf) {
- if (t->tx_dma == 0) { /* if DMA_ADDR_INVALID, map it */
- dma_tx_addr = dma_map_single(hw->dev,
- (void *)t->tx_buf,
- t->len, DMA_TO_DEVICE);
- if (dma_mapping_error(hw->dev, dma_tx_addr))
- dev_err(hw->dev, "tx dma map error\n");
- }
- } else {
+
+ if (!t->tx_buf) {
dma_sync_single_for_device(hw->dev, dma_rx_addr,
t->len, DMA_BIDIRECTIONAL);
hw->tx = hw->rx;
unsigned rfalarm;
unsigned send_at_once = MPC52xx_PSC_BUFSIZE;
unsigned recv_at_once;
+ int last_block = 0;
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
while (rb < t->len) {
if (t->len - rb > MPC52xx_PSC_BUFSIZE) {
rfalarm = MPC52xx_PSC_RFALARM;
+ last_block = 0;
} else {
send_at_once = t->len - sb;
rfalarm = MPC52xx_PSC_BUFSIZE - (t->len - rb);
+ last_block = 1;
}
dev_dbg(&spi->dev, "send %d bytes...\n", send_at_once);
for (; send_at_once; sb++, send_at_once--) {
/* set EOF flag before the last word is sent */
- if (send_at_once == 1)
+ if (send_at_once == 1 && last_block)
out_8(&psc->ircr2, 0x01);
if (tx_buf)
struct device *dev = &pdev->dev;
struct spi_imx_master *platform_info;
struct spi_master *master;
- struct driver_data *drv_data = NULL;
+ struct driver_data *drv_data;
struct resource *res;
int irq, status = 0;
goto err_no_pdata;
}
- drv_data->clk = clk_get(&pdev->dev, "perclk2");
- if (IS_ERR(drv_data->clk)) {
- dev_err(&pdev->dev, "probe - cannot get get\n");
- status = PTR_ERR(drv_data->clk);
- goto err_no_clk;
- }
- clk_enable(drv_data->clk);
-
/* Allocate master with space for drv_data */
master = spi_alloc_master(dev, sizeof(struct driver_data));
if (!master) {
drv_data->dummy_dma_buf = SPI_DUMMY_u32;
+ drv_data->clk = clk_get(&pdev->dev, "perclk2");
+ if (IS_ERR(drv_data->clk)) {
+ dev_err(&pdev->dev, "probe - cannot get clock\n");
+ status = PTR_ERR(drv_data->clk);
+ goto err_no_clk;
+ }
+ clk_enable(drv_data->clk);
+
/* Find and map resources */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
kfree(drv_data->ioarea);
err_no_iores:
- spi_master_put(master);
-
-err_no_pdata:
clk_disable(drv_data->clk);
clk_put(drv_data->clk);
+
err_no_clk:
+ spi_master_put(master);
+
+err_no_pdata:
err_no_mem:
return status;
}
static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
{
- return spi->controller_data;
+ return spi_master_get_devdata(spi->master);
}
static inline void setsck(struct spi_device *dev, int on)
/* setup spi bitbang adaptor */
sp->bitbang.master = spi_master_get(master);
sp->bitbang.master->bus_num = info->bus_num;
+ sp->bitbang.master->num_chipselect = info->num_chipselect;
sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
}
mutex_unlock(&device_list_lock);
- if (status != 0)
+ if (status == 0)
+ spi_set_drvdata(spi, spidev);
+ else
kfree(spidev);
return status;
If in doubt, say N here.
+if STAGING
+
config STAGING_EXCLUDE_BUILD
bool "Exclude Staging drivers from being built" if STAGING
default y
source "drivers/staging/poch/Kconfig"
endif # !STAGING_EXCLUDE_BUILD
+endif # STAGING
{ USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), },
{ 0, } /* terminating entry */
};
+MODULE_DEVICE_TABLE(usb, usbtmc_devices);
/*
* This structure is the capabilities for the device
* altsetting means creating new endpoint device entries).
* When either of these happens, defer the Set-Interface.
*/
- if (!error && intf->dev.power.status == DPM_ON)
+ if (intf->cur_altsetting->desc.bAlternateSetting == 0)
+ ; /* Already in altsetting 0 so skip Set-Interface */
+ else if (!error && intf->dev.power.status == DPM_ON)
usb_set_interface(udev, intf->altsetting[0].
desc.bInterfaceNumber, 0);
else
fs_in_desc.bEndpointAddress;
hs_out_desc.bEndpointAddress =
fs_out_desc.bEndpointAddress;
+ hs_notify_desc.bEndpointAddress =
+ fs_notify_desc.bEndpointAddress;
/* copy descriptors, and track endpoint copies */
f->hs_descriptors = usb_copy_descriptors(eth_hs_function);
f->hs_descriptors, &hs_in_desc);
rndis->hs.out = usb_find_endpoint(eth_hs_function,
f->hs_descriptors, &hs_out_desc);
+ rndis->hs.notify = usb_find_endpoint(eth_hs_function,
+ f->hs_descriptors, &hs_notify_desc);
}
rndis->port.open = rndis_open;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
nuke(loop_ep, -ESHUTDOWN);
spin_unlock_irqrestore(&udc_controller->lock, flags);
+ /* report disconnect; the controller is already quiesced */
+ driver->disconnect(&udc_controller->gadget);
+
/* unbind gadget and unhook driver. */
driver->unbind(&udc_controller->gadget);
udc_controller->gadget.dev.driver = NULL;
if (mach->gpio_vbus) {
int value = gpio_get_value(mach->gpio_vbus);
- return mach->gpio_vbus_inverted ? !value : value;
+
+ if (mach->gpio_vbus_inverted)
+ return !value;
+ else
+ return !!value;
}
if (mach->udc_is_connected)
return mach->udc_is_connected();
struct pxa25x_udc *udc;
udc = container_of(_gadget, struct pxa25x_udc, gadget);
- udc->vbus = (is_active != 0);
+ udc->vbus = is_active;
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
pullup(udc);
return 0;
static irqreturn_t udc_vbus_irq(int irq, void *_dev)
{
struct pxa25x_udc *dev = _dev;
- int vbus = gpio_get_value(dev->mach->gpio_vbus);
- if (dev->mach->gpio_vbus_inverted)
- vbus = !vbus;
-
- pxa25x_udc_vbus_session(&dev->gadget, vbus);
+ pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present());
return IRQ_HANDLED;
}
}
break;
case PCI_VENDOR_ID_ATI:
- /* SB700 old version has a bug in EHCI controller,
+ /* SB600 and old version of SB700 have a bug in EHCI controller,
* which causes usb devices lose response in some cases.
*/
- if (pdev->device == 0x4396) {
+ if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (!p_smbus)
break;
rev = p_smbus->revision;
- if ((rev == 0x3a) || (rev == 0x3b)) {
+ if ((pdev->device == 0x4386) || (rev == 0x3a)
+ || (rev == 0x3b)) {
u8 tmp;
+ ehci_info(ehci, "applying AMD SB600/SB700 USB "
+ "freeze workaround\n");
pci_read_config_byte(pdev, 0x53, &tmp);
pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
}
* the async ring; just the I/O watchdog. Note that if a
* SHRINK were pending, OFF would never be requested.
*/
- enum ehci_timer_action oldactions = ehci->actions;
+ if (timer_pending(&ehci->watchdog)
+ && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+ & ehci->actions))
+ return;
if (!test_and_set_bit (action, &ehci->actions)) {
unsigned long t;
- if (timer_pending(&ehci->watchdog)
- && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
- & oldactions))
- return;
-
switch (action) {
case TIMER_IO_WATCHDOG:
t = EHCI_IO_JIFFIES;
t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
break;
}
- mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+ mod_timer(&ehci->watchdog, t + jiffies);
}
}
err("no more memory");
goto reset_open_count;
}
+ kref_init(&tty->kref);
termios = kzalloc(sizeof(*termios), GFP_KERNEL);
if (!termios) {
retval = -ENOMEM;
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) },
priv->interface, buf, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
- port->tty->termios - this would loose speed settings, etc.
+ port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
/* AlphaMicro Components AMC-232USB01 device */
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
+/* www.candapter.com Ewert Energy Systems CANdapter device */
+#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+
/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
/* the VID is the standard ftdi vid (FTDI_VID) */
#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
/* OpenDCC (www.opendcc.de) product id */
#define FTDI_OPENDCC_PID 0xBFD8
+/* Sprog II (Andrew Crosland's SprogII DCC interface) */
+#define FTDI_SPROG_II 0xF0C8
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
#define ONDA_VENDOR_ID 0x19d2
#define ONDA_PRODUCT_MSA501HS 0x0001
#define ONDA_PRODUCT_ET502HS 0x0002
+#define ONDA_PRODUCT_MT503HS 0x0200
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
+ { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
+ { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
+ { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ } /* Terminating entry */
};
/* Y.C. Cable U.S.A., Inc - USB to RS-232 */
#define YCCABLE_VENDOR_ID 0x05ad
#define YCCABLE_PRODUCT_ID 0x0fba
+
+/* "Superial" USB - Serial */
+#define SUPERIAL_VENDOR_ID 0x5372
+#define SUPERIAL_PRODUCT_ID 0x2303
+
+/* Hewlett-Packard LD220-HP POS Pole Display */
+#define HP_VENDOR_ID 0x03f0
+#define HP_LD220_PRODUCT_ID 0x3524
* For questions or problems with this driver, contact Texas Instruments
* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
* Peter Berger <pberger@brimson.com>.
- *
- * This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
- * or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
- * configuration.
- *
- * #!/bin/bash
- *
- * BOOT_CONFIG=1
- * ACTIVE_CONFIG=2
- *
- * if [[ "$ACTION" != "add" ]]
- * then
- * exit
- * fi
- *
- * CONFIG_PATH=/sys${DEVPATH%/?*}/bConfigurationValue
- *
- * if [[ 0`cat $CONFIG_PATH` -ne $BOOT_CONFIG ]]
- * then
- * exit
- * fi
- *
- * PRODUCT=${PRODUCT%/?*} # delete version
- * VENDOR_ID=`printf "%d" 0x${PRODUCT%/?*}`
- * PRODUCT_ID=`printf "%d" 0x${PRODUCT#*?/}`
- *
- * PARAM_PATH=/sys/module/ti_usb_3410_5052/parameters
- *
- * function scan() {
- * s=$1
- * shift
- * for i
- * do
- * if [[ $s -eq $i ]]
- * then
- * return 0
- * fi
- * done
- * return 1
- * }
- *
- * IFS=$IFS,
- *
- * if (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_3410` &&
- * scan $PRODUCT_ID 13328 `cat $PARAM_PATH/product_3410`) ||
- * (scan $VENDOR_ID 1105 `cat $PARAM_PATH/vendor_5052` &&
- * scan $PRODUCT_ID 20562 20818 20570 20575 `cat $PARAM_PATH/product_5052`)
- * then
- * echo $ACTIVE_CONFIG > $CONFIG_PATH
- * fi
*/
#include <linux/kernel.h>
goto free_tdev;
}
- /* the second configuration must be set (in sysfs by hotplug script) */
+ /* the second configuration must be set */
if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
- status = -ENODEV;
+ status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG);
+ status = status ? status : -ENODEV;
goto free_tdev;
}
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Ozan Sener <themgzzy@gmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0060, 0x0551, 0x0551,
+ "Nokia",
+ "3500c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
+/* Reported by CSECSY Laszlo <boobaa@frugalware.org> */
+UNUSUAL_DEV( 0x0421, 0x0063, 0x0001, 0x0601,
+ "Nokia",
+ "Nokia 3109c",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/* Patch for Nokia 5310 capacity */
-UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0591,
+UNUSUAL_DEV( 0x0421, 0x006a, 0x0000, 0x0701,
"Nokia",
"5310",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
#endif
+/* Reported by Tamas Kerecsen <kerecsen@bigfoot.com>
+ * Obviously the PROM has not been customized by the VAR;
+ * the Vendor and Product string descriptors are:
+ * Generic Mass Storage (PROTOTYPE--Remember to change idVendor)
+ * Generic Manufacturer (PROTOTYPE--Remember to change idVendor)
+ */
+UNUSUAL_DEV( 0x045e, 0xffff, 0x0000, 0x0000,
+ "Mitac",
+ "GPS",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
* Reported by Pete Zaitcev <zaitcev@redhat.com>
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/* Reported by Tobias Kunze Briseno <t-linux@fictive.com> */
+UNUSUAL_DEV( 0x04b0, 0x0403, 0x0200, 0x0200,
+ "NIKON",
+ "NIKON DSC D2H",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY),
+
/* Reported by Milinevsky Dmitry <niam.niam@gmail.com> */
UNUSUAL_DEV( 0x04b0, 0x0409, 0x0100, 0x0100,
"NIKON",
* --dte
*/
-#define FLUSH_CACHE_WORKAROUND 1
-
-void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries)
+static void radeon_fixup_offset(struct radeonfb_info *rinfo)
{
- int i;
+ u32 local_base;
+
+ /* *** Ugly workaround *** */
+ /*
+ * On some platforms, the video memory is mapped at 0 in radeon chip space
+ * (like PPCs) by the firmware. X will always move it up so that it's seen
+ * by the chip to be at the same address as the PCI BAR.
+ * That means that when switching back from X, there is a mismatch between
+ * the offsets programmed into the engine. This means that potentially,
+ * accel operations done before radeonfb has a chance to re-init the engine
+ * will have incorrect offsets, and potentially trash system memory !
+ *
+ * The correct fix is for fbcon to never call any accel op before the engine
+ * has properly been re-initialized (by a call to set_var), but this is a
+ * complex fix. This workaround in the meantime, called before every accel
+ * operation, makes sure the offsets are in sync.
+ */
- for (i=0; i<2000000; i++) {
- rinfo->fifo_free = INREG(RBBM_STATUS) & 0x7f;
- if (rinfo->fifo_free >= entries)
- return;
- udelay(10);
- }
- printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
- /* XXX Todo: attempt to reset the engine */
-}
+ radeon_fifo_wait (1);
+ local_base = INREG(MC_FB_LOCATION) << 16;
+ if (local_base == rinfo->fb_local_base)
+ return;
-static inline void radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
-{
- if (entries <= rinfo->fifo_free)
- rinfo->fifo_free -= entries;
- else
- radeon_fifo_update_and_wait(rinfo, entries);
-}
+ rinfo->fb_local_base = local_base;
-static inline void radeonfb_set_creg(struct radeonfb_info *rinfo, u32 reg,
- u32 *cache, u32 new_val)
-{
- if (new_val == *cache)
- return;
- *cache = new_val;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(reg, new_val);
+ radeon_fifo_wait (3);
+ OUTREG(DEFAULT_PITCH_OFFSET, (rinfo->pitch << 0x16) |
+ (rinfo->fb_local_base >> 10));
+ OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
+ OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
}
static void radeonfb_prim_fillrect(struct radeonfb_info *rinfo,
const struct fb_fillrect *region)
{
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base | GMC_BRUSH_SOLID_COLOR | ROP3_P);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_BRUSH_FRGD_CLR, &rinfo->dp_brush_fg_cache,
- region->color);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(4);
+
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* contains, like GMC_DST_32BPP */
+ | GMC_BRUSH_SOLID_COLOR
+ | ROP3_P);
+ if (radeon_get_dstbpp(rinfo->depth) != DST_8BPP)
+ OUTREG(DP_BRUSH_FRGD_CLR, rinfo->pseudo_palette[region->color]);
+ else
+ OUTREG(DP_BRUSH_FRGD_CLR, region->color);
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 2);
+
+ radeon_fifo_wait(2);
OUTREG(DST_Y_X, (region->dy << 16) | region->dx);
OUTREG(DST_WIDTH_HEIGHT, (region->width << 16) | region->height);
}
struct fb_fillrect modded;
int vxres, vyres;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_fillrect(info, region);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
if(modded.dx + modded.width > vxres) modded.width = vxres - modded.dx;
if(modded.dy + modded.height > vyres) modded.height = vyres - modded.dy;
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR )
- modded.color = ((u32 *) (info->pseudo_palette))[region->color];
-
radeonfb_prim_fillrect(rinfo, &modded);
}
if ( xdir < 0 ) { sx += w-1; dx += w-1; }
if ( ydir < 0 ) { sy += h-1; dy += h-1; }
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
- GMC_SRC_DATATYPE_COLOR |
- ROP3_S |
- DP_SRC_SOURCE_MEMORY);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0) |
- (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
-
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait(3);
+ OUTREG(DP_GUI_MASTER_CNTL,
+ rinfo->dp_gui_master_cntl /* i.e. GMC_DST_32BPP */
+ | GMC_BRUSH_NONE
+ | GMC_SRC_DSTCOLOR
+ | ROP3_S
+ | DP_SRC_SOURCE_MEMORY );
+ OUTREG(DP_WRITE_MSK, 0xffffffff);
+ OUTREG(DP_CNTL, (xdir>=0 ? DST_X_LEFT_TO_RIGHT : 0)
+ | (ydir>=0 ? DST_Y_TOP_TO_BOTTOM : 0));
+
+ radeon_fifo_wait(2);
OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
- radeon_fifo_wait(rinfo, 3);
+
+ radeon_fifo_wait(3);
OUTREG(SRC_Y_X, (sy << 16) | sx);
OUTREG(DST_Y_X, (dy << 16) | dx);
OUTREG(DST_HEIGHT_WIDTH, (h << 16) | w);
modded.width = area->width;
modded.height = area->height;
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
if (info->flags & FBINFO_HWACCEL_DISABLED) {
cfb_copyarea(info, area);
return;
}
+ radeon_fixup_offset(rinfo);
+
vxres = info->var.xres_virtual;
vyres = info->var.yres_virtual;
radeonfb_prim_copyarea(rinfo, &modded);
}
-static void radeonfb_prim_imageblit(struct radeonfb_info *rinfo,
- const struct fb_image *image,
- u32 fg, u32 bg)
-{
- unsigned int src_bytes, dwords;
- u32 *bits;
-
- radeonfb_set_creg(rinfo, DP_GUI_MASTER_CNTL, &rinfo->dp_gui_mc_cache,
- rinfo->dp_gui_mc_base |
- GMC_BRUSH_NONE |
- GMC_SRC_DATATYPE_MONO_FG_BG |
- ROP3_S |
- GMC_BYTE_ORDER_MSB_TO_LSB |
- DP_SRC_SOURCE_HOST_DATA);
- radeonfb_set_creg(rinfo, DP_CNTL, &rinfo->dp_cntl_cache,
- DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
- radeonfb_set_creg(rinfo, DP_SRC_FRGD_CLR, &rinfo->dp_src_fg_cache, fg);
- radeonfb_set_creg(rinfo, DP_SRC_BKGD_CLR, &rinfo->dp_src_bg_cache, bg);
-
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DST_Y_X, (image->dy << 16) | image->dx);
-
- /* Ensure the dst cache is flushed and the engine idle before
- * issuing the operation.
- *
- * This works around engine lockups on some cards
- */
-#if FLUSH_CACHE_WORKAROUND
- radeon_fifo_wait(rinfo, 2);
- OUTREG(DSTCACHE_CTLSTAT, RB2D_DC_FLUSH_ALL);
- OUTREG(WAIT_UNTIL, (WAIT_2D_IDLECLEAN | WAIT_DMA_GUI_IDLE));
-#endif
-
- /* X here pads width to a multiple of 32 and uses the clipper to
- * adjust the result. Is that really necessary ? Things seem to
- * work ok for me without that and the doco doesn't seem to imply
- * there is such a restriction.
- */
- OUTREG(DST_WIDTH_HEIGHT, (image->width << 16) | image->height);
-
- src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
- dwords = (src_bytes + 3) / 4;
- bits = (u32*)(image->data);
-
- while(dwords >= 8) {
- radeon_fifo_wait(rinfo, 8);
-#if BITS_PER_LONG == 64
- __raw_writeq(*((u64 *)(bits)), rinfo->mmio_base + HOST_DATA0);
- __raw_writeq(*((u64 *)(bits+2)), rinfo->mmio_base + HOST_DATA2);
- __raw_writeq(*((u64 *)(bits+4)), rinfo->mmio_base + HOST_DATA4);
- __raw_writeq(*((u64 *)(bits+6)), rinfo->mmio_base + HOST_DATA6);
- bits += 8;
-#else
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA2);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA3);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA4);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA5);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA6);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA7);
-#endif
- dwords -= 8;
- }
- while(dwords--) {
- radeon_fifo_wait(rinfo, 1);
- __raw_writel(*(bits++), rinfo->mmio_base + HOST_DATA0);
- }
-}
-
void radeonfb_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct radeonfb_info *rinfo = info->par;
- u32 fg, bg;
-
- WARN_ON(rinfo->gfx_mode);
- if (info->state != FBINFO_STATE_RUNNING || rinfo->gfx_mode)
- return;
- if (!image->width || !image->height)
+ if (info->state != FBINFO_STATE_RUNNING)
return;
-
- /* We only do 1 bpp color expansion for now */
- if (info->flags & FBINFO_HWACCEL_DISABLED || image->depth != 1)
- goto fallback;
-
- /* Fallback if running out of the screen. We may do clipping
- * in the future */
- if ((image->dx + image->width) > info->var.xres_virtual ||
- (image->dy + image->height) > info->var.yres_virtual)
- goto fallback;
-
- if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
- info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
- fg = ((u32*)(info->pseudo_palette))[image->fg_color];
- bg = ((u32*)(info->pseudo_palette))[image->bg_color];
- } else {
- fg = image->fg_color;
- bg = image->bg_color;
- }
-
- radeonfb_prim_imageblit(rinfo, image, fg, bg);
- return;
-
- fallback:
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
cfb_imageblit(info, image);
}
if (info->state != FBINFO_STATE_RUNNING)
return 0;
-
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
return 0;
}
/* disable 3D engine */
OUTREG(RB3D_CNTL, 0);
- rinfo->fifo_free = 0;
radeonfb_engine_reset(rinfo);
- radeon_fifo_wait(rinfo, 1);
+ radeon_fifo_wait (1);
if (IS_R300_VARIANT(rinfo)) {
OUTREG(RB2D_DSTCACHE_MODE, INREG(RB2D_DSTCACHE_MODE) |
RB2D_DC_AUTOFLUSH_ENABLE |
OUTREG(RB2D_DSTCACHE_MODE, 0);
}
- radeon_fifo_wait(rinfo, 3);
+ radeon_fifo_wait (3);
/* We re-read MC_FB_LOCATION from card as it can have been
* modified by XFree drivers (ouch !)
*/
OUTREG(DST_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
OUTREG(SRC_PITCH_OFFSET, (rinfo->pitch << 0x16) | (rinfo->fb_local_base >> 10));
- radeon_fifo_wait(rinfo, 1);
-#ifdef __BIG_ENDIAN
+ radeon_fifo_wait (1);
+#if defined(__BIG_ENDIAN)
OUTREGP(DP_DATATYPE, HOST_BIG_ENDIAN_EN, ~HOST_BIG_ENDIAN_EN);
#else
OUTREGP(DP_DATATYPE, 0, ~HOST_BIG_ENDIAN_EN);
#endif
- radeon_fifo_wait(rinfo, 2);
+ radeon_fifo_wait (2);
OUTREG(DEFAULT_SC_TOP_LEFT, 0);
OUTREG(DEFAULT_SC_BOTTOM_RIGHT, (DEFAULT_SC_RIGHT_MAX |
DEFAULT_SC_BOTTOM_MAX));
- /* set default DP_GUI_MASTER_CNTL */
temp = radeon_get_dstbpp(rinfo->depth);
- rinfo->dp_gui_mc_base = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
+ rinfo->dp_gui_master_cntl = ((temp << 8) | GMC_CLR_CMP_CNTL_DIS);
- rinfo->dp_gui_mc_cache = rinfo->dp_gui_mc_base |
- GMC_BRUSH_SOLID_COLOR |
- GMC_SRC_DATATYPE_COLOR;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_GUI_MASTER_CNTL, rinfo->dp_gui_mc_cache);
+ radeon_fifo_wait (1);
+ OUTREG(DP_GUI_MASTER_CNTL, (rinfo->dp_gui_master_cntl |
+ GMC_BRUSH_SOLID_COLOR |
+ GMC_SRC_DATATYPE_COLOR));
+ radeon_fifo_wait (7);
/* clear line drawing regs */
- radeon_fifo_wait(rinfo, 2);
OUTREG(DST_LINE_START, 0);
OUTREG(DST_LINE_END, 0);
- /* set brush and source color regs */
- rinfo->dp_brush_fg_cache = 0xffffffff;
- rinfo->dp_brush_bg_cache = 0x00000000;
- rinfo->dp_src_fg_cache = 0xffffffff;
- rinfo->dp_src_bg_cache = 0x00000000;
- radeon_fifo_wait(rinfo, 4);
- OUTREG(DP_BRUSH_FRGD_CLR, rinfo->dp_brush_fg_cache);
- OUTREG(DP_BRUSH_BKGD_CLR, rinfo->dp_brush_bg_cache);
- OUTREG(DP_SRC_FRGD_CLR, rinfo->dp_src_fg_cache);
- OUTREG(DP_SRC_BKGD_CLR, rinfo->dp_src_bg_cache);
-
- /* Default direction */
- rinfo->dp_cntl_cache = DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM;
- radeon_fifo_wait(rinfo, 1);
- OUTREG(DP_CNTL, rinfo->dp_cntl_cache);
+ /* set brush color regs */
+ OUTREG(DP_BRUSH_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_BRUSH_BKGD_CLR, 0x00000000);
+
+ /* set source color regs */
+ OUTREG(DP_SRC_FRGD_CLR, 0xffffffff);
+ OUTREG(DP_SRC_BKGD_CLR, 0x00000000);
/* default write mask */
- radeon_fifo_wait(rinfo, 1);
OUTREG(DP_WRITE_MSK, 0xffffffff);
- /* Default to no swapping of host data */
- radeon_fifo_wait(rinfo, 1);
- OUTREG(RBBM_GUICNTL, RBBM_GUICNTL_HOST_DATA_SWAP_NONE);
-
- /* Make sure it's settled */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle ();
}
level = bd->props.brightness;
del_timer_sync(&rinfo->lvds_timer);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
lvds_gen_cntl = INREG(LVDS_GEN_CNTL);
if (level > 0) {
if (rinfo->asleep)
return 0;
+ radeon_fifo_wait(2);
OUTREG(CRTC_OFFSET, ((var->yoffset * var->xres_virtual + var->xoffset)
* var->bits_per_pixel / 8) & ~7);
return 0;
if (rc)
return rc;
+ radeon_fifo_wait(2);
if (value & 0x01) {
tmp = INREG(LVDS_GEN_CNTL);
if (rinfo->lock_blank)
return 0;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
val = INREG(CRTC_EXT_CNTL);
val &= ~(CRTC_DISPLAY_DIS | CRTC_HSYNC_DIS |
if (rinfo->asleep)
return 0;
-
+
return radeon_screen_blank(rinfo, blank, 0);
}
pindex = regno;
if (!rinfo->asleep) {
+ radeon_fifo_wait(9);
+
if (rinfo->bpp == 16) {
pindex = regno * 8;
{
int i;
+ radeon_fifo_wait(20);
+
/* Workaround from XFree */
if (rinfo->is_mobility) {
/* A temporal workaround for the occational blanking on certain laptop
{
struct radeonfb_info *rinfo = (struct radeonfb_info *)data;
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
OUTREG(LVDS_GEN_CNTL, rinfo->pending_lvds_gen_cntl);
}
if (nomodeset)
return;
- radeon_engine_idle(rinfo);
-
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_NORMAL, 0);
+ radeon_fifo_wait(31);
for (i=0; i<10; i++)
OUTREG(common_regs[i].reg, common_regs[i].val);
radeon_write_pll_regs(rinfo, mode);
if ((primary_mon == MT_DFP) || (primary_mon == MT_LCD)) {
+ radeon_fifo_wait(10);
OUTREG(FP_CRTC_H_TOTAL_DISP, mode->fp_crtc_h_total_disp);
OUTREG(FP_CRTC_V_TOTAL_DISP, mode->fp_crtc_v_total_disp);
OUTREG(FP_H_SYNC_STRT_WID, mode->fp_h_sync_strt_wid);
if (!regs_only)
radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 0);
+ radeon_fifo_wait(2);
OUTPLL(VCLK_ECP_CNTL, mode->vclk_ecp_cntl);
return;
/* We always want engine to be idle on a mode switch, even
* if we won't actually change the mode
*/
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
hSyncStart = mode->xres + mode->right_margin;
hSyncEnd = hSyncStart + mode->hsync_len;
return 0;
}
+
static struct fb_ops radeonfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = radeonfb_check_var,
info->par = rinfo;
info->pseudo_palette = rinfo->pseudo_palette;
info->flags = FBINFO_DEFAULT
- | FBINFO_HWACCEL_IMAGEBLIT
| FBINFO_HWACCEL_COPYAREA
| FBINFO_HWACCEL_FILLRECT
| FBINFO_HWACCEL_XPAN
u32 tom = INREG(NB_TOM);
tmp = ((((tom >> 16) - (tom & 0xffff) + 1) << 6) * 1024);
+ radeon_fifo_wait(6);
OUTREG(MC_FB_LOCATION, tom);
OUTREG(DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
OUTREG(CRTC2_DISPLAY_BASE_ADDR, (tom & 0xffff) << 16);
if (!(info->flags & FBINFO_HWACCEL_DISABLED)) {
/* Make sure engine is reset */
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
radeonfb_engine_reset(rinfo);
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
}
/* Blank display and LCD */
rinfo->asleep = 0;
} else
- radeon_engine_idle(rinfo);
+ radeon_engine_idle();
/* Restore display & engine */
radeon_write_mode (rinfo, &rinfo->state, 1);
int mon2_type;
u8 *mon2_EDID;
- /* accel bits */
- u32 dp_gui_mc_base;
- u32 dp_gui_mc_cache;
- u32 dp_cntl_cache;
- u32 dp_brush_fg_cache;
- u32 dp_brush_bg_cache;
- u32 dp_src_fg_cache;
- u32 dp_src_bg_cache;
- u32 fifo_free;
+ u32 dp_gui_master_cntl;
struct pll_info pll;
int lock_blank;
int dynclk;
int no_schedule;
- int gfx_mode;
enum radeon_pm_mode pm_mode;
reinit_function_ptr reinit_func;
#define OUTREG8(addr,val) writeb(val, (rinfo->mmio_base)+addr)
#define INREG16(addr) readw((rinfo->mmio_base)+addr)
#define OUTREG16(addr,val) writew(val, (rinfo->mmio_base)+addr)
-
-#ifdef CONFIG_PPC
-#define INREG(addr) ({ eieio(); ld_le32(rinfo->mmio_base+(addr)); })
-#define OUTREG(addr,val) do { eieio(); st_le32(rinfo->mmio_base+(addr),(val)); } while(0)
-#else
#define INREG(addr) readl((rinfo->mmio_base)+addr)
#define OUTREG(addr,val) writel(val, (rinfo->mmio_base)+addr)
-#endif
static inline void _OUTREGP(struct radeonfb_info *rinfo, u32 addr,
u32 val, u32 mask)
* 2D Engine helper routines
*/
-extern void radeon_fifo_update_and_wait(struct radeonfb_info *rinfo, int entries);
+static inline void _radeon_fifo_wait(struct radeonfb_info *rinfo, int entries)
+{
+ int i;
+
+ for (i=0; i<2000000; i++) {
+ if ((INREG(RBBM_STATUS) & 0x7f) >= entries)
+ return;
+ udelay(1);
+ }
+ printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
+}
static inline void radeon_engine_flush (struct radeonfb_info *rinfo)
{
/* Ensure FIFO is empty, ie, make sure the flush commands
* has reached the cache
*/
- radeon_fifo_update_and_wait(rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
/* Wait for the flush to complete */
for (i=0; i < 2000000; i++) {
}
-static inline void radeon_engine_idle(struct radeonfb_info *rinfo)
+static inline void _radeon_engine_idle(struct radeonfb_info *rinfo)
{
int i;
/* ensure FIFO is empty before waiting for idle */
- radeon_fifo_update_and_wait (rinfo, 64);
+ _radeon_fifo_wait (rinfo, 64);
for (i=0; i<2000000; i++) {
if (((INREG(RBBM_STATUS) & GUI_ACTIVE)) == 0) {
}
+#define radeon_engine_idle() _radeon_engine_idle(rinfo)
+#define radeon_fifo_wait(entries) _radeon_fifo_wait(rinfo,entries)
#define radeon_msleep(ms) _radeon_msleep(rinfo,ms)
extern int radeonfb_sync(struct fb_info *info);
extern void radeonfb_engine_init (struct radeonfb_info *rinfo);
extern void radeonfb_engine_reset(struct radeonfb_info *rinfo);
-extern void radeon_fixup_mem_offset(struct radeonfb_info *rinfo);
/* Other functions */
extern int radeon_screen_blank(struct radeonfb_info *rinfo, int blank, int mode_switch);
if (!fbcon_is_inactive(vc, info)) {
if (ops->blank_state != blank) {
- int ret = 1;
-
ops->blank_state = blank;
fbcon_cursor(vc, blank ? CM_ERASE : CM_DRAW);
ops->cursor_flash = (!blank);
- if (info->fbops->fb_blank)
- ret = info->fbops->fb_blank(blank, info);
- if (ret)
- fbcon_generic_blank(vc, info, blank);
+ if (!(info->flags & FBINFO_MISC_USEREVENT))
+ if (fb_blank(info, blank))
+ fbcon_generic_blank(vc, info, blank);
}
if (!blank)
softback_buf = 0UL;
for (i = 0; i < FB_MAX; i++) {
+ int pending;
+
mapped = 0;
info = registered_fb[i];
if (info == NULL)
continue;
+ pending = cancel_work_sync(&info->queue);
+ DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
+ "no"));
+
for (j = first_fb_vc; j <= last_fb_vc; j++) {
if (con2fb_map[j] == i)
mapped = 1;
};
static struct fb_fix_screeninfo macfb_fix = {
- .id = "Macintosh ",
.type = FB_TYPE_PACKED_PIXELS,
.accel = FB_ACCEL_NONE,
};
switch(ndev->dr_hw) {
case NUBUS_DRHW_APPLE_MDC:
- strcat( macfb_fix.id, "Display Card" );
+ strcpy(macfb_fix.id, "Mac Disp. Card");
macfb_setpalette = mdc_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
break;
case NUBUS_DRHW_APPLE_TFB:
- strcat( macfb_fix.id, "Toby" );
+ strcpy(macfb_fix.id, "Toby");
macfb_setpalette = toby_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
break;
case NUBUS_DRHW_APPLE_JET:
- strcat( macfb_fix.id, "Jet");
+ strcpy(macfb_fix.id, "Jet");
macfb_setpalette = jet_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
break;
default:
- strcat( macfb_fix.id, "Generic NuBus" );
+ strcpy(macfb_fix.id, "Generic NuBus");
break;
}
}
if (!video_is_nubus)
switch( mac_bi_data.id )
{
- /* These don't have onboard video. Eventually, we may
- be able to write separate framebuffer drivers for
- them (tobyfb.c, hiresfb.c, etc, etc) */
- case MAC_MODEL_II:
- case MAC_MODEL_IIX:
- case MAC_MODEL_IICX:
- case MAC_MODEL_IIFX:
- strcat( macfb_fix.id, "Generic NuBus" );
- break;
-
/* Valkyrie Quadras */
case MAC_MODEL_Q630:
/* I'm not sure about this one */
case MAC_MODEL_P588:
- strcat( macfb_fix.id, "Valkyrie built-in" );
+ strcpy(macfb_fix.id, "Valkyrie");
macfb_setpalette = valkyrie_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
valkyrie_cmap_regs = ioremap(DAC_BASE, 0x1000);
case MAC_MODEL_Q700:
case MAC_MODEL_Q900:
case MAC_MODEL_Q950:
- strcat( macfb_fix.id, "DAFB built-in" );
+ strcpy(macfb_fix.id, "DAFB");
macfb_setpalette = dafb_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000);
/* LC II uses the V8 framebuffer */
case MAC_MODEL_LCII:
- strcat( macfb_fix.id, "V8 built-in" );
+ strcpy(macfb_fix.id, "V8");
macfb_setpalette = v8_brazil_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
case MAC_MODEL_IIVI:
case MAC_MODEL_IIVX:
case MAC_MODEL_P600:
- strcat( macfb_fix.id, "Brazil built-in" );
+ strcpy(macfb_fix.id, "Brazil");
macfb_setpalette = v8_brazil_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
case MAC_MODEL_P460:
macfb_setpalette = v8_brazil_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
- strcat( macfb_fix.id, "Sonora built-in" );
+ strcpy(macfb_fix.id, "Sonora");
v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000);
break;
case MAC_MODEL_IISI:
macfb_setpalette = rbv_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
- strcat( macfb_fix.id, "RBV built-in" );
+ strcpy(macfb_fix.id, "RBV");
rbv_cmap_regs = ioremap(DAC_BASE, 0x1000);
break;
case MAC_MODEL_C660:
macfb_setpalette = civic_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
- strcat( macfb_fix.id, "Civic built-in" );
+ strcpy(macfb_fix.id, "Civic");
civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000);
break;
v8_brazil_cmap_regs =
ioremap(DAC_BASE, 0x1000);
}
- strcat( macfb_fix.id, "LC built-in" );
+ strcpy(macfb_fix.id, "LC");
break;
/* We think this may be like the LC II */
case MAC_MODEL_CCL:
v8_brazil_cmap_regs =
ioremap(DAC_BASE, 0x1000);
}
- strcat( macfb_fix.id, "Color Classic built-in" );
+ strcpy(macfb_fix.id, "Color Classic");
break;
/* And we *do* mean "weirdos" */
case MAC_MODEL_TV:
- strcat( macfb_fix.id, "Mac TV built-in" );
+ strcpy(macfb_fix.id, "Mac TV");
break;
/* These don't have colour, so no need to worry */
case MAC_MODEL_SE30:
case MAC_MODEL_CLII:
- strcat( macfb_fix.id, "Monochrome built-in" );
+ strcpy(macfb_fix.id, "Monochrome");
break;
/* Powerbooks are particularly difficult. Many of
case MAC_MODEL_PB140:
case MAC_MODEL_PB145:
case MAC_MODEL_PB170:
- strcat( macfb_fix.id, "DDC built-in" );
+ strcpy(macfb_fix.id, "DDC");
break;
/* Internal is GSC, External (if present) is ViSC */
case MAC_MODEL_PB180:
case MAC_MODEL_PB210:
case MAC_MODEL_PB230:
- strcat( macfb_fix.id, "GSC built-in" );
+ strcpy(macfb_fix.id, "GSC");
break;
/* Internal is TIM, External is ViSC */
case MAC_MODEL_PB165C:
case MAC_MODEL_PB180C:
- strcat( macfb_fix.id, "TIM built-in" );
+ strcpy(macfb_fix.id, "TIM");
break;
/* Internal is CSC, External is Keystone+Ariel. */
case MAC_MODEL_PB280C:
macfb_setpalette = csc_setpalette;
macfb_defined.activate = FB_ACTIVATE_NOW;
- strcat( macfb_fix.id, "CSC built-in" );
+ strcpy(macfb_fix.id, "CSC");
csc_cmap_regs = ioremap(CSC_BASE, 0x1000);
break;
default:
- strcat( macfb_fix.id, "Unknown/Unsupported built-in" );
+ strcpy(macfb_fix.id, "Unknown");
break;
}
fb_info.pseudo_palette = pseudo_palette;
fb_info.flags = FBINFO_DEFAULT;
- fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0);
+ err = fb_alloc_cmap(&fb_info.cmap, video_cmap_len, 0);
+ if (err)
+ goto fail_unmap;
err = register_framebuffer(&fb_info);
- if (!err)
- printk("fb%d: %s frame buffer device\n",
- fb_info.node, fb_info.fix.id);
- else {
- iounmap(fb_info.screen_base);
- iounmap_macfb();
- }
+ if (err)
+ goto fail_dealloc;
+
+ printk("fb%d: %s frame buffer device\n",
+ fb_info.node, fb_info.fix.id);
+ return 0;
+
+fail_dealloc:
+ fb_dealloc_cmap(&fb_info.cmap);
+fail_unmap:
+ iounmap(fb_info.screen_base);
+ iounmap_macfb();
return err;
}
}
dev_dbg(dev, "fb phys 0x%llx 0x%lx\n",
- (u64)par->fb_base_phys, (ulong)par->mapped_vram);
+ (unsigned long long)par->fb_base_phys, (ulong)par->mapped_vram);
dev_dbg(dev, "mmio phys 0x%llx 0x%lx\n",
- (u64)par->mmio_base_phys, (ulong)par->mmio_len);
+ (unsigned long long)par->mmio_base_phys, (ulong)par->mmio_len);
if (mb862xx_pci_gdc_init(par))
goto io_unmap;
objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o
omapfb-objs := $(objs-yy)
+++ /dev/null
-/*
- * LCD panel support for the Siemens SX1 mobile phone
- *
- * Current version : Vovan888@gmail.com, great help from FCA00000
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/gpio.h>
-#include <mach/omapfb.h>
-#include <mach/mcbsp.h>
-#include <mach/mux.h>
-
-/*
- * OMAP310 GPIO registers
- */
-#define GPIO_DATA_INPUT 0xfffce000
-#define GPIO_DATA_OUTPUT 0xfffce004
-#define GPIO_DIR_CONTROL 0xfffce008
-#define GPIO_INT_CONTROL 0xfffce00c
-#define GPIO_INT_MASK 0xfffce010
-#define GPIO_INT_STATUS 0xfffce014
-#define GPIO_PIN_CONTROL 0xfffce018
-
-
-#define A_LCD_SSC_RD 3
-#define A_LCD_SSC_SD 7
-#define _A_LCD_RESET 9
-#define _A_LCD_SSC_CS 12
-#define _A_LCD_SSC_A0 13
-
-#define DSP_REG 0xE1017024
-
-const unsigned char INIT_1[12] = {
- 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00
-};
-
-const unsigned char INIT_2[127] = {
- 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00,
- 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00,
- 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00,
- 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01,
- 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01,
- 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01,
- 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01,
- 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01,
- 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01,
- 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01,
- 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01,
- 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01,
- 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01,
- 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01,
- 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02,
- 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00
-};
-
-const unsigned char INIT_3[15] = {
- 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59,
- 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF
-};
-
-static void epson_sendbyte(int flag, unsigned char byte)
-{
- int i, shifter = 0x80;
-
- if (!flag)
- gpio_set_value(_A_LCD_SSC_A0, 0);
- mdelay(2);
- gpio_set_value(A_LCD_SSC_RD, 1);
-
- gpio_set_value(A_LCD_SSC_SD, flag);
-
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- for (i = 0; i < 8; i++) {
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200);
- gpio_set_value(A_LCD_SSC_SD, shifter & byte);
- OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202);
- shifter >>= 1;
- }
- gpio_set_value(_A_LCD_SSC_A0, 1);
-}
-
-static void init_system(void)
-{
- omap_mcbsp_request(OMAP_MCBSP3);
- omap_mcbsp_stop(OMAP_MCBSP3);
-}
-
-static void setup_GPIO(void)
-{
- /* new wave */
- gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd");
- gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd");
- gpio_request(_A_LCD_RESET, "lcd_reset");
- gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs");
- gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0");
-
- /* set GPIOs to output, with initial data */
- gpio_direction_output(A_LCD_SSC_RD, 1);
- gpio_direction_output(A_LCD_SSC_SD, 0);
- gpio_direction_output(_A_LCD_RESET, 0);
- gpio_direction_output(_A_LCD_SSC_CS, 1);
- gpio_direction_output(_A_LCD_SSC_A0, 1);
-}
-
-static void display_init(void)
-{
- int i;
-
- omap_cfg_reg(MCBSP3_CLKX);
-
- mdelay(2);
- setup_GPIO();
- mdelay(2);
-
- /* reset LCD */
- gpio_set_value(A_LCD_SSC_SD, 1);
- epson_sendbyte(0, 0x25);
-
- gpio_set_value(_A_LCD_RESET, 0);
- mdelay(10);
- gpio_set_value(_A_LCD_RESET, 1);
-
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(2);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD, phase 1 */
- epson_sendbyte(0, 0xCA);
- for (i = 0; i < 10; i++)
- epson_sendbyte(1, INIT_1[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2 */
- epson_sendbyte(0, 0xCB);
- for (i = 0; i < 125; i++)
- epson_sendbyte(1, INIT_2[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 2a */
- epson_sendbyte(0, 0xCC);
- for (i = 0; i < 14; i++)
- epson_sendbyte(1, INIT_3[i]);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 3 */
- epson_sendbyte(0, 0xBC);
- epson_sendbyte(1, 0x08);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 4 */
- epson_sendbyte(0, 0x07);
- epson_sendbyte(1, 0x05);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 5 */
- epson_sendbyte(0, 0x94);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 6 */
- epson_sendbyte(0, 0xC6);
- epson_sendbyte(1, 0x80);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100); /* used to be 1000 */
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 7 */
- epson_sendbyte(0, 0x16);
- epson_sendbyte(1, 0x02);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xB1);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 8 */
- epson_sendbyte(0, 0x76);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0x00);
- epson_sendbyte(1, 0xDB);
- epson_sendbyte(1, 0x00);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- /* init LCD phase 9 */
- epson_sendbyte(0, 0xAF);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
-{
- return 0;
-}
-
-static void sx1_panel_cleanup(struct lcd_panel *panel)
-{
-}
-
-static void sx1_panel_disable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "SX1: LCD panel disable\n");
- sx1_setmmipower(0);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-
- epson_sendbyte(0, 0x25);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0xAE);
- gpio_set_value(_A_LCD_SSC_CS, 1);
- mdelay(100);
- gpio_set_value(_A_LCD_SSC_CS, 0);
-
- epson_sendbyte(0, 0x95);
- gpio_set_value(_A_LCD_SSC_CS, 1);
-}
-
-static int sx1_panel_enable(struct lcd_panel *panel)
-{
- printk(KERN_INFO "lcd_sx1: LCD panel enable\n");
- init_system();
- display_init();
-
- sx1_setmmipower(1);
- sx1_setbacklight(0x18);
- sx1_setkeylight (0x06);
- return 0;
-}
-
-
-static unsigned long sx1_panel_get_caps(struct lcd_panel *panel)
-{
- return 0;
-}
-
-struct lcd_panel sx1_panel = {
- .name = "sx1",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK |
- OMAP_LCDC_INV_OUTPUT_EN,
-
- .x_res = 176,
- .y_res = 220,
- .data_lines = 16,
- .bpp = 16,
- .hsw = 5,
- .hfp = 5,
- .hbp = 5,
- .vsw = 2,
- .vfp = 1,
- .vbp = 1,
- .pixel_clock = 1500,
-
- .init = sx1_panel_init,
- .cleanup = sx1_panel_cleanup,
- .enable = sx1_panel_enable,
- .disable = sx1_panel_disable,
- .get_caps = sx1_panel_get_caps,
-};
-
-static int sx1_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&sx1_panel);
- return 0;
-}
-
-static int sx1_panel_remove(struct platform_device *pdev)
-{
- return 0;
-}
-
-static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
-{
- return 0;
-}
-
-static int sx1_panel_resume(struct platform_device *pdev)
-{
- return 0;
-}
-
-struct platform_driver sx1_panel_driver = {
- .probe = sx1_panel_probe,
- .remove = sx1_panel_remove,
- .suspend = sx1_panel_suspend,
- .resume = sx1_panel_resume,
- .driver = {
- .name = "lcd_sx1",
- .owner = THIS_MODULE,
- },
-};
-
-static int sx1_panel_drv_init(void)
-{
- return platform_driver_register(&sx1_panel_driver);
-}
-
-static void sx1_panel_drv_cleanup(void)
-{
- platform_driver_unregister(&sx1_panel_driver);
-}
-
-module_init(sx1_panel_drv_init);
-module_exit(sx1_panel_drv_cleanup);
int bpp;
rg = &plane->fbdev->mem_desc.region[plane->idx];
- fbi->screen_base = (char __iomem *)rg->vaddr;
+ fbi->screen_base = rg->vaddr;
fix->smem_start = rg->paddr;
fix->smem_len = rg->size;
static int pxafb_smart_init(struct pxafb_info *fbi)
{
+ if (!(fbi->lccr0 | LCCR0_LCDT))
+ return 0;
+
fbi->smart_thread = kthread_run(pxafb_smart_thread, fbi,
"lcd_refresh");
if (IS_ERR(fbi->smart_thread)) {
fbi->cmap_inverse = inf->cmap_inverse;
fbi->cmap_static = inf->cmap_static;
- switch (lcd_conn & 0xf) {
+ switch (lcd_conn & LCD_TYPE_MASK) {
case LCD_TYPE_MONO_STN:
fbi->lccr0 = LCCR0_CMS;
break;
{ "" }
};
-static struct xenbus_driver xenfb = {
+static struct xenbus_driver xenfb_driver = {
.name = "vfb",
.owner = THIS_MODULE,
.ids = xenfb_ids,
if (xen_initial_domain())
return -ENODEV;
- return xenbus_register_frontend(&xenfb);
+ return xenbus_register_frontend(&xenfb_driver);
}
static void __exit xenfb_cleanup(void)
{
- xenbus_unregister_driver(&xenfb);
+ xenbus_unregister_driver(&xenfb_driver);
}
module_init(xenfb_init);
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
- dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
- (void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+ dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+ (unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+ fbsize);
return 0; /* success */
config W1_MASTER_DS1WM
tristate "Maxim DS1WM 1-wire busmaster"
- depends on W1 && ARM
+ depends on W1 && ARM && HAVE_CLK
help
Say Y here to enable the DS1WM 1-wire driver, such as that
in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like
w1_write_8(sl->master, W1_SKIP_ROM);
else {
u8 match[9] = {W1_MATCH_ROM, };
- memcpy(&match[1], (u8 *)&sl->reg_num, 8);
+ u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+
+ memcpy(&match[1], &rn, 8);
w1_write_block(sl->master, match, 9);
}
return 0;
#include <linux/bootmem.h>
#include <linux/slab.h>
#include <asm/desc.h>
+#include <asm/cacheflush.h>
#define PCI_BIOS32_SD_VALUE 0x5F32335F /* "_32_" */
#define CRU_BIOS_SIGNATURE_VALUE 0x55524324
smbios_cru64_ptr->double_offset;
cru_rom_addr = ioremap(cru_physical_address,
smbios_cru64_ptr->double_length);
+ set_memory_x((unsigned long)cru_rom_addr & PAGE_MASK,
+ smbios_cru64_ptr->double_length >> PAGE_SHIFT);
}
}
}
"Management Log for details.\n");
}
- return NOTIFY_STOP;
+ return NOTIFY_OK;
}
/*
/*
* intel TCO vendor specific watchdog driver support
*
- * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Module and version information */
#define DRV_NAME "iTCO_vendor_support"
-#define DRV_VERSION "1.01"
-#define DRV_RELDATE "11-Nov-2006"
+#define DRV_VERSION "1.02"
#define PFX DRV_NAME ": "
/* Includes */
* 20.6 seconds.
*/
-static void supermicro_old_pre_start(unsigned long acpibase)
-{
- unsigned long val32;
-
- val32 = inl(SMI_EN);
- val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
- outl(val32, SMI_EN); /* Needed to activate watchdog */
-}
-
-static void supermicro_old_pre_stop(unsigned long acpibase)
-{
- unsigned long val32;
-
- val32 = inl(SMI_EN);
- val32 &= 0x00002000; /* Turn on SMI clearing watchdog */
- outl(val32, SMI_EN); /* Needed to deactivate watchdog */
-}
-
static void supermicro_old_pre_keepalive(unsigned long acpibase)
{
/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
void iTCO_vendor_pre_start(unsigned long acpibase,
unsigned int heartbeat)
{
- if (vendorsupport == SUPERMICRO_OLD_BOARD)
- supermicro_old_pre_start(acpibase);
- else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_start(heartbeat);
}
EXPORT_SYMBOL(iTCO_vendor_pre_start);
void iTCO_vendor_pre_stop(unsigned long acpibase)
{
- if (vendorsupport == SUPERMICRO_OLD_BOARD)
- supermicro_old_pre_stop(acpibase);
- else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ if (vendorsupport == SUPERMICRO_NEW_BOARD)
supermicro_new_pre_stop();
}
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
/*
* intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets)
*
- * (c) Copyright 2006-2007 Wim Van Sebroeck <wim@iguana.be>.
+ * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
* 82801CA (ICH3-S) : document number 290733-003, 290739-013,
* 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
- * 82801DB (ICH4) : document number 290744-001, 290745-020,
- * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
+ * 82801DB (ICH4) : document number 290744-001, 290745-025,
+ * 82801DBM (ICH4-M) : document number 252337-001, 252663-008,
* 82801E (C-ICH) : document number 273599-001, 273645-002,
- * 82801EB (ICH5) : document number 252516-001, 252517-003,
- * 82801ER (ICH5R) : document number 252516-001, 252517-003,
- * 82801FB (ICH6) : document number 301473-002, 301474-007,
- * 82801FR (ICH6R) : document number 301473-002, 301474-007,
- * 82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- * 82801FW (ICH6W) : document number 301473-001, 301474-007,
- * 82801FRW (ICH6RW) : document number 301473-001, 301474-007,
- * 82801GB (ICH7) : document number 307013-002, 307014-009,
- * 82801GR (ICH7R) : document number 307013-002, 307014-009,
- * 82801GDH (ICH7DH) : document number 307013-002, 307014-009,
- * 82801GBM (ICH7-M) : document number 307013-002, 307014-009,
- * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009,
- * 82801HB (ICH8) : document number 313056-003, 313057-009,
- * 82801HR (ICH8R) : document number 313056-003, 313057-009,
- * 82801HBM (ICH8M) : document number 313056-003, 313057-009,
- * 82801HH (ICH8DH) : document number 313056-003, 313057-009,
- * 82801HO (ICH8DO) : document number 313056-003, 313057-009,
- * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
- * 82801IB (ICH9) : document number 316972-001, 316973-006,
- * 82801IR (ICH9R) : document number 316972-001, 316973-006,
- * 82801IH (ICH9DH) : document number 316972-001, 316973-006,
- * 82801IO (ICH9DO) : document number 316972-001, 316973-006,
- * 6300ESB (6300ESB) : document number 300641-003, 300884-010,
- * 631xESB (631xESB) : document number 313082-001, 313075-005,
- * 632xESB (632xESB) : document number 313082-001, 313075-005
+ * 82801EB (ICH5) : document number 252516-001, 252517-028,
+ * 82801ER (ICH5R) : document number 252516-001, 252517-028,
+ * 6300ESB (6300ESB) : document number 300641-004, 300884-013,
+ * 82801FB (ICH6) : document number 301473-002, 301474-026,
+ * 82801FR (ICH6R) : document number 301473-002, 301474-026,
+ * 82801FBM (ICH6-M) : document number 301473-002, 301474-026,
+ * 82801FW (ICH6W) : document number 301473-001, 301474-026,
+ * 82801FRW (ICH6RW) : document number 301473-001, 301474-026,
+ * 631xESB (631xESB) : document number 313082-001, 313075-006,
+ * 632xESB (632xESB) : document number 313082-001, 313075-006,
+ * 82801GB (ICH7) : document number 307013-003, 307014-024,
+ * 82801GR (ICH7R) : document number 307013-003, 307014-024,
+ * 82801GDH (ICH7DH) : document number 307013-003, 307014-024,
+ * 82801GBM (ICH7-M) : document number 307013-003, 307014-024,
+ * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024,
+ * 82801GU (ICH7-U) : document number 307013-003, 307014-024,
+ * 82801HB (ICH8) : document number 313056-003, 313057-017,
+ * 82801HR (ICH8R) : document number 313056-003, 313057-017,
+ * 82801HBM (ICH8M) : document number 313056-003, 313057-017,
+ * 82801HH (ICH8DH) : document number 313056-003, 313057-017,
+ * 82801HO (ICH8DO) : document number 313056-003, 313057-017,
+ * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017,
+ * 82801IB (ICH9) : document number 316972-004, 316973-012,
+ * 82801IR (ICH9R) : document number 316972-004, 316973-012,
+ * 82801IH (ICH9DH) : document number 316972-004, 316973-012,
+ * 82801IO (ICH9DO) : document number 316972-004, 316973-012,
+ * 82801IBM (ICH9M) : document number 316972-004, 316973-012,
+ * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012,
+ * 82801JIB (ICH10) : document number 319973-002, 319974-002,
+ * 82801JIR (ICH10R) : document number 319973-002, 319974-002,
+ * 82801JD (ICH10D) : document number 319973-002, 319974-002,
+ * 82801JDO (ICH10DO) : document number 319973-002, 319974-002
*/
/*
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.03"
-#define DRV_RELDATE "30-Apr-2008"
+#define DRV_VERSION "1.04"
#define PFX DRV_NAME ": "
/* Includes */
TCO_ICH6, /* ICH6 & ICH6R */
TCO_ICH6M, /* ICH6-M */
TCO_ICH6W, /* ICH6W & ICH6RW */
+ TCO_631XESB, /* 631xESB/632xESB */
TCO_ICH7, /* ICH7 & ICH7R */
- TCO_ICH7M, /* ICH7-M */
+ TCO_ICH7DH, /* ICH7DH */
+ TCO_ICH7M, /* ICH7-M & ICH7-U */
TCO_ICH7MDH, /* ICH7-M DH */
TCO_ICH8, /* ICH8 & ICH8R */
- TCO_ICH8ME, /* ICH8M-E */
TCO_ICH8DH, /* ICH8DH */
TCO_ICH8DO, /* ICH8DO */
TCO_ICH8M, /* ICH8M */
+ TCO_ICH8ME, /* ICH8M-E */
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
TCO_ICH9DO, /* ICH9DO */
- TCO_631XESB, /* 631xESB/632xESB */
+ TCO_ICH9M, /* ICH9M */
+ TCO_ICH9ME, /* ICH9M-E */
+ TCO_ICH10, /* ICH10 */
+ TCO_ICH10R, /* ICH10R */
+ TCO_ICH10D, /* ICH10D */
+ TCO_ICH10DO, /* ICH10DO */
};
static struct {
{"ICH6 or ICH6R", 2},
{"ICH6-M", 2},
{"ICH6W or ICH6RW", 2},
+ {"631xESB/632xESB", 2},
{"ICH7 or ICH7R", 2},
- {"ICH7-M", 2},
+ {"ICH7DH", 2},
+ {"ICH7-M or ICH7-U", 2},
{"ICH7-M DH", 2},
{"ICH8 or ICH8R", 2},
- {"ICH8M-E", 2},
{"ICH8DH", 2},
{"ICH8DO", 2},
{"ICH8M", 2},
+ {"ICH8M-E", 2},
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
{"ICH9DO", 2},
- {"631xESB/632xESB", 2},
+ {"ICH9M", 2},
+ {"ICH9M-E", 2},
+ {"ICH10", 2},
+ {"ICH10R", 2},
+ {"ICH10D", 2},
+ {"ICH10DO", 2},
{NULL, 0}
};
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)},
- { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)},
- { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)},
- { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x267d, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x267e, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x267f, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)},
+ { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)},
+ { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)},
+ { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)},
+ { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)},
+ { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)},
+ { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)},
+ { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)},
+ { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
static int iTCO_wdt_start(void)
{
unsigned int val;
+ unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
return -EIO;
}
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
+
+ /* Force the timer to its reload value by writing to the TCO_RLD
+ register */
+ if (iTCO_wdt_private.iTCO_version == 2)
+ outw(0x01, TCO_RLD);
+ else if (iTCO_wdt_private.iTCO_version == 1)
+ outb(0x01, TCO_RLD);
+
/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
val = inw(TCO1_CNT);
val &= 0xf7ff;
static int iTCO_wdt_stop(void)
{
unsigned int val;
+ unsigned long val32;
spin_lock(&iTCO_wdt_private.io_lock);
outw(val, TCO1_CNT);
val = inw(TCO1_CNT);
+ /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+ val32 = inl(SMI_EN);
+ val32 |= 0x00002000;
+ outl(val32, SMI_EN);
+
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
/*
* Reload and activate timer
*/
- iTCO_wdt_keepalive();
iTCO_wdt_start();
return nonseekable_open(inode, file);
}
int ret;
u32 base_address;
unsigned long RCBA;
- unsigned long val32;
/*
* Find the ACPI/PM base I/O address which is the base
/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
iTCO_wdt_set_NO_REBOOT_bit();
- /* Set the TCO_EN bit in SMI_EN register */
+ /* The TCO logic uses the TCO_EN bit in the SMI_EN register */
if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
printk(KERN_ERR PFX
"I/O address 0x%04lx already in use\n", SMI_EN);
ret = -EIO;
goto out;
}
- val32 = inl(SMI_EN);
- val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
- outl(val32, SMI_EN);
- release_region(SMI_EN, 4);
/* The TCO I/O registers reside in a 32-byte range pointed to
by the TCOBASE value */
printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
TCOBASE);
ret = -EIO;
- goto out;
+ goto unreg_smi_en;
}
printk(KERN_INFO PFX
TCOBASE);
/* Clear out the (probably old) status */
- outb(0, TCO1_STS);
- outb(3, TCO2_STS);
+ outb(8, TCO1_STS); /* Clear the Time Out Status bit */
+ outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */
+ outb(4, TCO2_STS); /* Clear BOOT_STS bit */
/* Make sure the watchdog is not running */
iTCO_wdt_stop();
unreg_region:
release_region(TCOBASE, 0x20);
+unreg_smi_en:
+ release_region(SMI_EN, 4);
out:
if (iTCO_wdt_private.iTCO_version == 2)
iounmap(iTCO_wdt_private.gcs);
/* Deregister */
misc_deregister(&iTCO_wdt_miscdev);
release_region(TCOBASE, 0x20);
+ release_region(SMI_EN, 4);
if (iTCO_wdt_private.iTCO_version == 2)
iounmap(iTCO_wdt_private.gcs);
pci_dev_put(iTCO_wdt_private.pdev);
{
int err;
- printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s (%s)\n",
- DRV_VERSION, DRV_RELDATE);
+ printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n",
+ DRV_VERSION);
err = platform_driver_register(&iTCO_wdt_driver);
if (err)
static void mtx1_wdt_start(void)
{
+ unsigned long flags;
+
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (!mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 1;
static int mtx1_wdt_stop(void)
{
+ unsigned long flags;
+
spin_lock_irqsave(&mtx1_wdt_device.lock, flags);
if (mtx1_wdt_device.queue) {
mtx1_wdt_device.queue = 0;
struct v9fs_dentry *dent;
P9_DPRINTK(P9_DEBUG_VFS, "fid %d dentry %s\n",
- fid->fid, dentry->d_iname);
+ fid->fid, dentry->d_name.name);
dent = dentry->d_fsdata;
if (!dent) {
struct p9_fid *fid, *ret;
P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p) uid %d any %d\n",
- dentry->d_iname, dentry, uid, any);
+ dentry->d_name.name, dentry, uid, any);
dent = (struct v9fs_dentry *) dentry->d_fsdata;
ret = NULL;
if (dent) {
v9ses->flags |= V9FS_ACCESS_ANY;
else {
v9ses->flags |= V9FS_ACCESS_SINGLE;
- v9ses->uid = simple_strtol(s, &e, 10);
+ v9ses->uid = simple_strtoul(s, &e, 10);
if (*e != '\0')
v9ses->uid = ~0;
}
static int v9fs_dentry_delete(struct dentry *dentry)
{
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
return 1;
}
static int v9fs_cached_dentry_delete(struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
if(!inode)
return 1;
struct v9fs_dentry *dent;
struct p9_fid *temp, *current_fid;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
dent = dentry->d_fsdata;
if (dent) {
list_for_each_entry_safe(current_fid, temp, &dent->fidlist,
if (buflen > PATH_MAX)
buflen = PATH_MAX;
- P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
+ dentry);
retval = v9fs_readlink(dentry, link, buflen);
{
char *s = nd_get_link(nd);
- P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name, s);
+ P9_DPRINTK(P9_DEBUG_VFS, " %s %s\n", dentry->d_name.name,
+ IS_ERR(s) ? "<error>" : s);
if (!IS_ERR(s))
__putname(s);
}
if (res)
return res;
- if (!(filp->f_mode & FMODE_EXCL))
- return 0;
+ if (filp->f_mode & FMODE_EXCL) {
+ res = bd_claim(bdev, filp);
+ if (res)
+ goto out_blkdev_put;
+ }
- if (!(res = bd_claim(bdev, filp)))
- return 0;
+ return 0;
+ out_blkdev_put:
blkdev_put(bdev, filp->f_mode);
return res;
}
{
struct block_device *bdev = I_BDEV(file->f_mapping->host);
fmode_t mode = file->f_mode;
+
+ /*
+ * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+ * to updated it before every ioctl.
+ */
if (file->f_flags & O_NDELAY)
- mode |= FMODE_NDELAY_NOW;
+ mode |= FMODE_NDELAY;
+ else
+ mode &= ~FMODE_NDELAY;
+
return blkdev_ioctl(bdev, mode, cmd, arg);
}
spin_unlock(&buffer_mapping->private_lock);
}
}
+EXPORT_SYMBOL(invalidate_inode_buffers);
/*
* Remove any clean buffers from the inode's buffer list. This is called
node->flags = le16_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
- __le16 *tmp = kmalloc(strlen(searchName)*2, GFP_KERNEL);
+ __le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
+ GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
node->path_consumed = hostlen_fromUCS(tmp,
cFYI(1, ("write_end for page %p from pos %lld with %d bytes",
page, pos, copied));
- if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
+ if (PageChecked(page)) {
+ if (copied == len)
+ SetPageUptodate(page);
+ ClearPageChecked(page);
+ } else if (!PageUptodate(page) && copied == PAGE_CACHE_SIZE)
SetPageUptodate(page);
if (!PageUptodate(page)) {
{
pgoff_t index = pos >> PAGE_CACHE_SHIFT;
loff_t offset = pos & (PAGE_CACHE_SIZE - 1);
+ loff_t page_start = pos & PAGE_MASK;
+ loff_t i_size;
+ struct page *page;
+ int rc = 0;
cFYI(1, ("write_begin from %lld len %d", (long long)pos, len));
- *pagep = __grab_cache_page(mapping, index);
- if (!*pagep)
- return -ENOMEM;
-
- if (PageUptodate(*pagep))
- return 0;
+ page = __grab_cache_page(mapping, index);
+ if (!page) {
+ rc = -ENOMEM;
+ goto out;
+ }
- /* If we are writing a full page it will be up to date,
- no need to read from the server */
- if (len == PAGE_CACHE_SIZE && flags & AOP_FLAG_UNINTERRUPTIBLE)
- return 0;
+ if (PageUptodate(page))
+ goto out;
- if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
- int rc;
+ /*
+ * If we write a full page it will be up to date, no need to read from
+ * the server. If the write is short, we'll end up doing a sync write
+ * instead.
+ */
+ if (len == PAGE_CACHE_SIZE)
+ goto out;
- /* might as well read a page, it is fast enough */
- rc = cifs_readpage_worker(file, *pagep, &offset);
+ /*
+ * optimize away the read when we have an oplock, and we're not
+ * expecting to use any of the data we'd be reading in. That
+ * is, when the page lies beyond the EOF, or straddles the EOF
+ * and the write will cover all of the existing data.
+ */
+ if (CIFS_I(mapping->host)->clientCanCacheRead) {
+ i_size = i_size_read(mapping->host);
+ if (page_start >= i_size ||
+ (offset == 0 && (pos + len) >= i_size)) {
+ zero_user_segments(page, 0, offset,
+ offset + len,
+ PAGE_CACHE_SIZE);
+ /*
+ * PageChecked means that the parts of the page
+ * to which we're not writing are considered up
+ * to date. Once the data is copied to the
+ * page, it can be set uptodate.
+ */
+ SetPageChecked(page);
+ goto out;
+ }
+ }
- /* we do not need to pass errors back
- e.g. if we do not have read access to the file
- because cifs_write_end will attempt synchronous writes
- -- shaggy */
+ if ((file->f_flags & O_ACCMODE) != O_WRONLY) {
+ /*
+ * might as well read a page, it is fast enough. If we get
+ * an error, we don't need to return it. cifs_write_end will
+ * do a sync write instead since PG_uptodate isn't set.
+ */
+ cifs_readpage_worker(file, page, &page_start);
} else {
/* we could try using another file handle if there is one -
but how would we lock it to prevent close of that handle
racing with this read? In any case
this will be written out by write_end so is fine */
}
-
- return 0;
+out:
+ *pagep = page;
+ return rc;
}
const struct address_space_operations cifs_addr_ops = {
#define EP_UNACTIVE_PTR ((void *) -1L)
+#define EP_ITEM_COST (sizeof(struct epitem) + sizeof(struct eppoll_entry))
+
struct epoll_filefd {
struct file *file;
int fd;
* holding ->lock.
*/
struct epitem *ovflist;
+
+ /* The user that created the eventpoll descriptor */
+ struct user_struct *user;
};
/* Wait structure used by the poll hooks */
struct epitem *epi;
};
+/*
+ * Configuration options available inside /proc/sys/fs/epoll/
+ */
+/* Maximum number of epoll devices, per user */
+static int max_user_instances __read_mostly;
+/* Maximum number of epoll watched descriptors, per user */
+static int max_user_watches __read_mostly;
+
/*
* This mutex is used to serialize ep_free() and eventpoll_release_file().
*/
-static struct mutex epmutex;
+static DEFINE_MUTEX(epmutex);
/* Safe wake up implementation */
static struct poll_safewake psw;
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
+#ifdef CONFIG_SYSCTL
+
+#include <linux/sysctl.h>
+
+static int zero;
+
+ctl_table epoll_table[] = {
+ {
+ .procname = "max_user_instances",
+ .data = &max_user_instances,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ {
+ .procname = "max_user_watches",
+ .data = &max_user_watches,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &zero,
+ },
+ { .ctl_name = 0 }
+};
+#endif /* CONFIG_SYSCTL */
+
/* Setup the structure that is used as key for the RB tree */
static inline void ep_set_ffd(struct epoll_filefd *ffd,
/* At this point it is safe to free the eventpoll item */
kmem_cache_free(epi_cache, epi);
+ atomic_dec(&ep->user->epoll_watches);
+
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_remove(%p, %p)\n",
current, ep, file));
mutex_unlock(&epmutex);
mutex_destroy(&ep->mtx);
+ atomic_dec(&ep->user->epoll_devs);
+ free_uid(ep->user);
kfree(ep);
}
static int ep_alloc(struct eventpoll **pep)
{
- struct eventpoll *ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ int error;
+ struct user_struct *user;
+ struct eventpoll *ep;
- if (!ep)
- return -ENOMEM;
+ user = get_current_user();
+ error = -EMFILE;
+ if (unlikely(atomic_read(&user->epoll_devs) >=
+ max_user_instances))
+ goto free_uid;
+ error = -ENOMEM;
+ ep = kzalloc(sizeof(*ep), GFP_KERNEL);
+ if (unlikely(!ep))
+ goto free_uid;
spin_lock_init(&ep->lock);
mutex_init(&ep->mtx);
INIT_LIST_HEAD(&ep->rdllist);
ep->rbr = RB_ROOT;
ep->ovflist = EP_UNACTIVE_PTR;
+ ep->user = user;
*pep = ep;
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: ep_alloc() ep=%p\n",
current, ep));
return 0;
+
+free_uid:
+ free_uid(user);
+ return error;
}
/*
struct epitem *epi;
struct ep_pqueue epq;
- error = -ENOMEM;
+ if (unlikely(atomic_read(&ep->user->epoll_watches) >=
+ max_user_watches))
+ return -ENOSPC;
if (!(epi = kmem_cache_alloc(epi_cache, GFP_KERNEL)))
- goto error_return;
+ return -ENOMEM;
/* Item initialization follow here ... */
INIT_LIST_HEAD(&epi->rdllink);
* install process. Namely an allocation for a wait queue failed due
* high memory pressure.
*/
+ error = -ENOMEM;
if (epi->nwait < 0)
goto error_unregister;
spin_unlock_irqrestore(&ep->lock, flags);
+ atomic_inc(&ep->user->epoll_watches);
+
/* We have to call this outside the lock */
if (pwake)
ep_poll_safewake(&psw, &ep->poll_wait);
spin_unlock_irqrestore(&ep->lock, flags);
kmem_cache_free(epi_cache, epi);
-error_return:
+
return error;
}
flags & O_CLOEXEC);
if (fd < 0)
ep_free(ep);
+ atomic_inc(&ep->user->epoll_devs);
error_return:
DNPRINTK(3, (KERN_INFO "[%p] eventpoll: sys_epoll_create(%d) = %d\n",
static int __init eventpoll_init(void)
{
- mutex_init(&epmutex);
+ struct sysinfo si;
+
+ si_meminfo(&si);
+ max_user_instances = 128;
+ max_user_watches = (((si.totalram - si.totalhigh) / 32) << PAGE_SHIFT) /
+ EP_ITEM_COST;
/* Initialize the structure used to perform safe poll wait head wake ups */
ep_poll_safewake_init(&psw);
*/
int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs)
{
+ unsigned int depth = bprm->recursion_depth;
int try,retval;
struct linux_binfmt *fmt;
#ifdef __alpha__
continue;
read_unlock(&binfmt_lock);
retval = fn(bprm, regs);
+ /*
+ * Restore the depth counter to its starting value
+ * in this call, so we don't have to rely on every
+ * load_binary function to restore it on return.
+ */
+ bprm->recursion_depth = depth;
if (retval >= 0) {
- tracehook_report_exec(fmt, bprm, regs);
+ if (depth == 0)
+ tracehook_report_exec(fmt, bprm, regs);
put_binfmt(fmt);
allow_write_access(bprm->file);
if (bprm->file)
* Try to get any dentry for the given file handle from the filesystem.
*/
result = nop->fh_to_dentry(mnt->mnt_sb, fid, fh_len, fileid_type);
+ if (!result)
+ result = ERR_PTR(-ESTALE);
if (IS_ERR(result))
return result;
target_dir = nop->fh_to_parent(mnt->mnt_sb, fid,
fh_len, fileid_type);
+ if (!target_dir)
+ goto err_result;
err = PTR_ERR(target_dir);
if (IS_ERR(target_dir))
goto err_result;
if (free_blocks - (nblocks + root_blocks + dirty_blocks) <
EXT4_FREEBLOCKS_WATERMARK) {
- free_blocks = percpu_counter_sum(fbc);
- dirty_blocks = percpu_counter_sum(dbc);
+ free_blocks = percpu_counter_sum_positive(fbc);
+ dirty_blocks = percpu_counter_sum_positive(dbc);
if (dirty_blocks < 0) {
printk(KERN_CRIT "Dirty block accounting "
"went wrong %lld\n",
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
+#include <linux/smp_lock.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
if (error)
return error;
+ /*
+ * We still need a lock here for now to keep multiple FASYNC calls
+ * from racing with each other.
+ */
+ lock_kernel();
if ((arg ^ filp->f_flags) & FASYNC) {
if (filp->f_op && filp->f_op->fasync) {
error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
out:
+ unlock_kernel();
return error;
}
watches = &inode->inotify_watches;
list_for_each_entry_safe(watch, next_w, watches, i_list) {
struct inotify_handle *ih= watch->ih;
+ get_inotify_watch(watch);
mutex_lock(&ih->mutex);
ih->in_ops->handle_event(watch, watch->wd, IN_UNMOUNT, 0,
NULL, NULL);
inotify_remove_watch_locked(ih, watch);
mutex_unlock(&ih->mutex);
+ put_inotify_watch(watch);
}
mutex_unlock(&inode->inotify_mutex);
iput(inode);
/* Did FASYNC state change ? */
if ((flag ^ filp->f_flags) & FASYNC) {
- if (filp->f_op && filp->f_op->fasync) {
- lock_kernel();
+ if (filp->f_op && filp->f_op->fasync)
error = filp->f_op->fasync(fd, filp, on);
- unlock_kernel();
- } else
+ else
error = -ENOTTY;
}
if (error)
break;
case FIONBIO:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fionbio(filp, argp);
+ unlock_kernel();
break;
case FIOASYNC:
+ /* BKL needed to avoid races tweaking f_flags */
+ lock_kernel();
error = ioctl_fioasync(fd, filp, argp);
+ unlock_kernel();
break;
case FIOQSIZE:
continue;
if (host->h_server != ni->server)
continue;
- if (!nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
+ if (ni->server &&
+ !nlm_cmp_addr(nlm_srcaddr(host), ni->src_sap))
continue;
/* Move to head of hash chain. */
}
flush_signals(current);
cancel_delayed_work_sync(&grace_period_end);
+ locks_end_grace(&lockd_manager);
if (nlmsvc_ops)
nlmsvc_invalidate_all();
nlm_shutdown_hosts();
return 0;
nfs4_save_user(&uid, &gid);
+ INIT_LIST_HEAD(dentries);
filp = dentry_open(dget(dir), mntget(rec_dir.mnt), O_RDONLY);
status = PTR_ERR(filp);
if (IS_ERR(filp))
goto out;
- INIT_LIST_HEAD(dentries);
status = vfs_readdir(filp, nfsd4_build_dentrylist, &dla);
fput(filp);
while (!list_empty(dentries)) {
{
cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work);
destroy_workqueue(laundry_wq);
+ locks_end_grace(&nfsd4_manager);
nfs4_lock_state();
nfs4_release_reclaim();
__nfs4_state_shutdown();
extern int debug_msgs;
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
+extern void __ntfs_debug(const char *file, int line, const char *function,
+ const char *format, ...) __attribute__ ((format (printf, 4, 5)));
/**
* ntfs_debug - write a debug level message to syslog
* @f: a printf format string containing the message
* ntfs_debug() writes a DEBUG level message to the syslog but only if the
* driver was compiled with -DDEBUG. Otherwise, the call turns into a NOP.
*/
-static void ntfs_debug(const char *f, ...);
-#endif
-
-extern void __ntfs_debug (const char *file, int line, const char *function,
- const char *format, ...) __attribute__ ((format (printf, 4, 5)));
#define ntfs_debug(f, a...) \
__ntfs_debug(__FILE__, __LINE__, __func__, f, ##a)
bh = bhs[i];
if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
+ mlog(ML_BH_IO,
"trying to sync read a jbd "
"managed bh (blocknr = %llu), skipping\n",
(unsigned long long)bh->b_blocknr);
for (i = nr; i > 0; i--) {
bh = bhs[i - 1];
- if (buffer_jbd(bh)) {
- mlog(ML_ERROR,
- "the journal got the buffer while it was "
- "locked for io! (blocknr = %llu)\n",
- (unsigned long long)bh->b_blocknr);
- BUG();
- }
+ /* No need to wait on the buffer if it's managed by JBD. */
+ if (!buffer_jbd(bh))
+ wait_on_buffer(bh);
- wait_on_buffer(bh);
if (!buffer_uptodate(bh)) {
/* Status won't be cleared from here on out,
* so we can safely record this and loop back
ignore_cache = 1;
}
- /* XXX: Can we ever get this and *not* have the cached
- * flag set? */
if (buffer_jbd(bh)) {
if (ignore_cache)
mlog(ML_BH_IO, "trying to sync read a jbd "
0, (SLAB_HWCACHE_ALIGN|SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
dlmfs_init_once);
- if (!dlmfs_inode_cache)
+ if (!dlmfs_inode_cache) {
+ status = -ENOMEM;
goto bail;
+ }
cleanup_inode = 1;
user_dlm_worker = create_singlethread_workqueue("user_dlm");
#include <linux/workqueue.h>
/* user_lock_res->l_flags flags. */
-#define USER_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define USER_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define USER_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
lockres_clear_flags(lockres, OCFS2_LOCK_BUSY);
lockres->l_unlock_action = OCFS2_UNLOCK_INVALID;
- spin_unlock_irqrestore(&lockres->l_lock, flags);
-
wake_up(&lockres->l_event);
+ spin_unlock_irqrestore(&lockres->l_lock, flags);
mlog_exit_void();
}
};
/* ocfs2_lock_res->l_flags flags. */
-#define OCFS2_LOCK_ATTACHED (0x00000001) /* have we initialized
+#define OCFS2_LOCK_ATTACHED (0x00000001) /* we have initialized
* the lvb */
#define OCFS2_LOCK_BUSY (0x00000002) /* we are currently in
* dlm_lock */
#define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask) \
OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
-#define OCFS2_FEATURE_COMPAT_SUPP OCFS2_FEATURE_COMPAT_BACKUP_SB
+#define OCFS2_FEATURE_COMPAT_SUPP (OCFS2_FEATURE_COMPAT_BACKUP_SB \
+ | OCFS2_FEATURE_COMPAT_JBD2_SB)
#define OCFS2_FEATURE_INCOMPAT_SUPP (OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT \
| OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC \
| OCFS2_FEATURE_INCOMPAT_INLINE_DATA \
*/
#define OCFS2_FEATURE_COMPAT_BACKUP_SB 0x0001
+/*
+ * The filesystem will correctly handle journal feature bits.
+ */
+#define OCFS2_FEATURE_COMPAT_JBD2_SB 0x0002
+
/*
* Unwritten extents support.
*/
static void *user_dlm_lvb(union ocfs2_dlm_lksb *lksb)
{
+ if (!lksb->lksb_fsdlm.sb_lvbptr)
+ lksb->lksb_fsdlm.sb_lvbptr = (char *)lksb +
+ sizeof(struct dlm_lksb);
return (void *)(lksb->lksb_fsdlm.sb_lvbptr);
}
return ret;
}
- i = xs->here - old_xh->xh_entries;
- xs->here = &xs->header->xh_entries[i];
}
+ i = xs->here - old_xh->xh_entries;
+ xs->here = &xs->header->xh_entries[i];
}
return ret;
task->latency_record[i].time,
task->latency_record[i].max);
for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
- char sym[KSYM_NAME_LEN];
+ char sym[KSYM_SYMBOL_LEN];
char *c;
if (!task->latency_record[i].backtrace[q])
break;
return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
-static unsigned long pte_to_pagemap_entry(pte_t pte)
+static u64 pte_to_pagemap_entry(pte_t pte)
{
- unsigned long pme = 0;
+ u64 pme = 0;
if (is_swap_pte(pte))
pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
| PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
int err;
struct ubifs_info *c = info;
- ubifs_msg("background thread \"%s\" started, PID %d",
- c->bgt_name, current->pid);
+ dbg_msg("background thread \"%s\" started, PID %d",
+ c->bgt_name, current->pid);
set_freezable();
while (1) {
if (c->key_fmt == UBIFS_SIMPLE_KEY_FMT) {
switch (type) {
case UBIFS_INO_KEY:
- sprintf(p, "(%lu, %s)", key_inum(c, key),
+ sprintf(p, "(%lu, %s)", (unsigned long)key_inum(c, key),
get_key_type(type));
break;
case UBIFS_DENT_KEY:
case UBIFS_XENT_KEY:
- sprintf(p, "(%lu, %s, %#08x)", key_inum(c, key),
+ sprintf(p, "(%lu, %s, %#08x)",
+ (unsigned long)key_inum(c, key),
get_key_type(type), key_hash(c, key));
break;
case UBIFS_DATA_KEY:
- sprintf(p, "(%lu, %s, %u)", key_inum(c, key),
+ sprintf(p, "(%lu, %s, %u)",
+ (unsigned long)key_inum(c, key),
get_key_type(type), key_block(c, key));
break;
case UBIFS_TRUN_KEY:
sprintf(p, "(%lu, %s)",
- key_inum(c, key), get_key_type(type));
+ (unsigned long)key_inum(c, key),
+ get_key_type(type));
break;
default:
sprintf(p, "(bad key type: %#08x, %#08x)",
le32_to_cpu(mst->ihead_lnum));
printk(KERN_DEBUG "\tihead_offs %u\n",
le32_to_cpu(mst->ihead_offs));
- printk(KERN_DEBUG "\tindex_size %u\n",
- le32_to_cpu(mst->index_size));
+ printk(KERN_DEBUG "\tindex_size %llu\n",
+ (unsigned long long)le64_to_cpu(mst->index_size));
printk(KERN_DEBUG "\tlpt_lnum %u\n",
le32_to_cpu(mst->lpt_lnum));
printk(KERN_DEBUG "\tlpt_offs %u\n",
if (inum > c->highest_inum) {
ubifs_err("too high inode number, max. is %lu",
- c->highest_inum);
+ (unsigned long)c->highest_inum);
return ERR_PTR(-EINVAL);
}
ino_key_init(c, &key, inum);
err = ubifs_lookup_level0(c, &key, &znode, &n);
if (!err) {
- ubifs_err("inode %lu not found in index", inum);
+ ubifs_err("inode %lu not found in index", (unsigned long)inum);
return ERR_PTR(-ENOENT);
} else if (err < 0) {
- ubifs_err("error %d while looking up inode %lu", err, inum);
+ ubifs_err("error %d while looking up inode %lu",
+ err, (unsigned long)inum);
return ERR_PTR(err);
}
zbr = &znode->zbranch[n];
if (zbr->len < UBIFS_INO_NODE_SZ) {
- ubifs_err("bad node %lu node length %d", inum, zbr->len);
+ ubifs_err("bad node %lu node length %d",
+ (unsigned long)inum, zbr->len);
return ERR_PTR(-EINVAL);
}
kfree(ino);
if (IS_ERR(fscki)) {
ubifs_err("error %ld while adding inode %lu node",
- PTR_ERR(fscki), inum);
+ PTR_ERR(fscki), (unsigned long)inum);
return fscki;
}
if (IS_ERR(fscki)) {
err = PTR_ERR(fscki);
ubifs_err("error %d while processing data node and "
- "trying to find inode node %lu", err, inum);
+ "trying to find inode node %lu",
+ err, (unsigned long)inum);
goto out_dump;
}
if (IS_ERR(fscki)) {
err = PTR_ERR(fscki);
ubifs_err("error %d while processing entry node and "
- "trying to find inode node %lu", err, inum);
+ "trying to find inode node %lu",
+ err, (unsigned long)inum);
goto out_dump;
}
err = PTR_ERR(fscki);
ubifs_err("error %d while processing entry node and "
"trying to find parent inode node %lu",
- err, inum);
+ err, (unsigned long)inum);
goto out_dump;
}
fscki->references != 1) {
ubifs_err("directory inode %lu has %d "
"direntries which refer it, but "
- "should be 1", fscki->inum,
+ "should be 1",
+ (unsigned long)fscki->inum,
fscki->references);
goto out_dump;
}
fscki->references != 0) {
ubifs_err("root inode %lu has non-zero (%d) "
"direntries which refer it",
- fscki->inum, fscki->references);
+ (unsigned long)fscki->inum,
+ fscki->references);
goto out_dump;
}
if (fscki->calc_sz != fscki->size) {
ubifs_err("directory inode %lu size is %lld, "
"but calculated size is %lld",
- fscki->inum, fscki->size,
- fscki->calc_sz);
+ (unsigned long)fscki->inum,
+ fscki->size, fscki->calc_sz);
goto out_dump;
}
if (fscki->calc_cnt != fscki->nlink) {
ubifs_err("directory inode %lu nlink is %d, "
"but calculated nlink is %d",
- fscki->inum, fscki->nlink,
- fscki->calc_cnt);
+ (unsigned long)fscki->inum,
+ fscki->nlink, fscki->calc_cnt);
goto out_dump;
}
} else {
if (fscki->references != fscki->nlink) {
ubifs_err("inode %lu nlink is %d, but "
- "calculated nlink is %d", fscki->inum,
+ "calculated nlink is %d",
+ (unsigned long)fscki->inum,
fscki->nlink, fscki->references);
goto out_dump;
}
if (fscki->xattr_sz != fscki->calc_xsz) {
ubifs_err("inode %lu has xattr size %u, but "
"calculated size is %lld",
- fscki->inum, fscki->xattr_sz,
+ (unsigned long)fscki->inum, fscki->xattr_sz,
fscki->calc_xsz);
goto out_dump;
}
if (fscki->xattr_cnt != fscki->calc_xcnt) {
ubifs_err("inode %lu has %u xattrs, but "
- "calculated count is %lld", fscki->inum,
+ "calculated count is %lld",
+ (unsigned long)fscki->inum,
fscki->xattr_cnt, fscki->calc_xcnt);
goto out_dump;
}
if (fscki->xattr_nms != fscki->calc_xnms) {
ubifs_err("inode %lu has xattr names' size %u, but "
"calculated names' size is %lld",
- fscki->inum, fscki->xattr_nms,
+ (unsigned long)fscki->inum, fscki->xattr_nms,
fscki->calc_xnms);
goto out_dump;
}
ino_key_init(c, &key, fscki->inum);
err = ubifs_lookup_level0(c, &key, &znode, &n);
if (!err) {
- ubifs_err("inode %lu not found in index", fscki->inum);
+ ubifs_err("inode %lu not found in index",
+ (unsigned long)fscki->inum);
return -ENOENT;
} else if (err < 0) {
ubifs_err("error %d while looking up inode %lu",
- err, fscki->inum);
+ err, (unsigned long)fscki->inum);
return err;
}
}
ubifs_msg("dump of the inode %lu sitting in LEB %d:%d",
- fscki->inum, zbr->lnum, zbr->offs);
+ (unsigned long)fscki->inum, zbr->lnum, zbr->offs);
dbg_dump_node(c, ino);
kfree(ino);
return -EINVAL;
return ERR_PTR(-EINVAL);
}
ubifs_warn("running out of inode numbers (current %lu, max %d)",
- c->highest_inum, INUM_WATERMARK);
+ (unsigned long)c->highest_inum, INUM_WATERMARK);
}
inode->i_ino = ++c->highest_inum;
dbg_gen("feed '%s', ino %llu, new f_pos %#x",
dent->name, (unsigned long long)le64_to_cpu(dent->inum),
key_hash_flash(c, &dent->key));
- ubifs_assert(dent->ch.sqnum > ubifs_inode(dir)->creat_sqnum);
+ ubifs_assert(le64_to_cpu(dent->ch.sqnum) >
+ ubifs_inode(dir)->creat_sqnum);
nm.len = le16_to_cpu(dent->nlen);
over = filldir(dirent, dent->name, nm.len, file->f_pos,
return err;
}
- ubifs_assert(dn->ch.sqnum > ubifs_inode(inode)->creat_sqnum);
+ ubifs_assert(le64_to_cpu(dn->ch.sqnum) > ubifs_inode(inode)->creat_sqnum);
len = le32_to_cpu(dn->size);
if (len <= 0 || len > UBIFS_BLOCK_SIZE)
dn = bu->buf + (bu->zbranch[nn].offs - offs);
- ubifs_assert(dn->ch.sqnum >
+ ubifs_assert(le64_to_cpu(dn->ch.sqnum) >
ubifs_inode(inode)->creat_sqnum);
len = le32_to_cpu(dn->size);
/**
* ubifs_do_bulk_read - do bulk-read.
* @c: UBIFS file-system description object
- * @page1: first page
+ * @bu: bulk-read information
+ * @page1: first page to read
*
* This function returns %1 if the bulk-read is done, otherwise %0 is returned.
*/
-static int ubifs_do_bulk_read(struct ubifs_info *c, struct page *page1)
+static int ubifs_do_bulk_read(struct ubifs_info *c, struct bu_info *bu,
+ struct page *page1)
{
pgoff_t offset = page1->index, end_index;
struct address_space *mapping = page1->mapping;
struct inode *inode = mapping->host;
struct ubifs_inode *ui = ubifs_inode(inode);
- struct bu_info *bu;
int err, page_idx, page_cnt, ret = 0, n = 0;
+ int allocate = bu->buf ? 0 : 1;
loff_t isize;
- bu = kmalloc(sizeof(struct bu_info), GFP_NOFS);
- if (!bu)
- return 0;
-
- bu->buf_len = c->bulk_read_buf_size;
- bu->buf = kmalloc(bu->buf_len, GFP_NOFS);
- if (!bu->buf)
- goto out_free;
-
- data_key_init(c, &bu->key, inode->i_ino,
- offset << UBIFS_BLOCKS_PER_PAGE_SHIFT);
-
err = ubifs_tnc_get_bu_keys(c, bu);
if (err)
goto out_warn;
* together. If all the pages were like this, bulk-read would
* reduce performance, so we turn it off for a while.
*/
- ui->read_in_a_row = 0;
- ui->bulk_read = 0;
- goto out_free;
+ goto out_bu_off;
}
if (bu->cnt) {
+ if (allocate) {
+ /*
+ * Allocate bulk-read buffer depending on how many data
+ * nodes we are going to read.
+ */
+ bu->buf_len = bu->zbranch[bu->cnt - 1].offs +
+ bu->zbranch[bu->cnt - 1].len -
+ bu->zbranch[0].offs;
+ ubifs_assert(bu->buf_len > 0);
+ ubifs_assert(bu->buf_len <= c->leb_size);
+ bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN);
+ if (!bu->buf)
+ goto out_bu_off;
+ }
+
err = ubifs_tnc_bulk_read(c, bu);
if (err)
goto out_warn;
ui->last_page_read = offset + page_idx - 1;
out_free:
- kfree(bu->buf);
- kfree(bu);
+ if (allocate)
+ kfree(bu->buf);
return ret;
out_warn:
ubifs_warn("ignoring error %d and skipping bulk-read", err);
goto out_free;
+
+out_bu_off:
+ ui->read_in_a_row = ui->bulk_read = 0;
+ goto out_free;
}
/**
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_inode *ui = ubifs_inode(inode);
pgoff_t index = page->index, last_page_read = ui->last_page_read;
- int ret = 0;
+ struct bu_info *bu;
+ int err = 0, allocated = 0;
ui->last_page_read = index;
-
if (!c->bulk_read)
return 0;
+
/*
- * Bulk-read is protected by ui_mutex, but it is an optimization, so
- * don't bother if we cannot lock the mutex.
+ * Bulk-read is protected by @ui->ui_mutex, but it is an optimization,
+ * so don't bother if we cannot lock the mutex.
*/
if (!mutex_trylock(&ui->ui_mutex))
return 0;
+
if (index != last_page_read + 1) {
/* Turn off bulk-read if we stop reading sequentially */
ui->read_in_a_row = 1;
ui->bulk_read = 0;
goto out_unlock;
}
+
if (!ui->bulk_read) {
ui->read_in_a_row += 1;
if (ui->read_in_a_row < 3)
/* Three reads in a row, so switch on bulk-read */
ui->bulk_read = 1;
}
- ret = ubifs_do_bulk_read(c, page);
+
+ /*
+ * If possible, try to use pre-allocated bulk-read information, which
+ * is protected by @c->bu_mutex.
+ */
+ if (mutex_trylock(&c->bu_mutex))
+ bu = &c->bu;
+ else {
+ bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN);
+ if (!bu)
+ goto out_unlock;
+
+ bu->buf = NULL;
+ allocated = 1;
+ }
+
+ bu->buf_len = c->max_bu_buf_len;
+ data_key_init(c, &bu->key, inode->i_ino,
+ page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT);
+ err = ubifs_do_bulk_read(c, bu, page);
+
+ if (!allocated)
+ mutex_unlock(&c->bu_mutex);
+ else
+ kfree(bu);
+
out_unlock:
mutex_unlock(&ui->ui_mutex);
- return ret;
+ return err;
}
static int ubifs_readpage(struct file *file, struct page *page)
int dlen = UBIFS_DATA_NODE_SZ + UBIFS_BLOCK_SIZE * WORST_COMPR_FACTOR;
struct ubifs_inode *ui = ubifs_inode(inode);
- dbg_jnl("ino %lu, blk %u, len %d, key %s", key_inum(c, key),
- key_block(c, key), len, DBGKEY(key));
+ dbg_jnl("ino %lu, blk %u, len %d, key %s",
+ (unsigned long)key_inum(c, key), key_block(c, key), len,
+ DBGKEY(key));
ubifs_assert(len <= UBIFS_BLOCK_SIZE);
data = kmalloc(dlen, GFP_NOFS);
ino_t inum = inode->i_ino;
unsigned int blk;
- dbg_jnl("ino %lu, size %lld -> %lld", inum, old_size, new_size);
+ dbg_jnl("ino %lu, size %lld -> %lld",
+ (unsigned long)inum, old_size, new_size);
ubifs_assert(!ui->data_len);
ubifs_assert(S_ISREG(inode->i_mode));
ubifs_assert(mutex_is_locked(&ui->ui_mutex));
{
const union ubifs_key *key = k;
- return le32_to_cpu(key->u32[1]) >> UBIFS_S_KEY_BLOCK_BITS;
+ return le32_to_cpu(key->j32[1]) >> UBIFS_S_KEY_BLOCK_BITS;
}
/**
{
const union ubifs_key *key = k;
- return le32_to_cpu(key->u32[1]) & UBIFS_S_KEY_BLOCK_MASK;
+ return le32_to_cpu(key->j32[1]) & UBIFS_S_KEY_BLOCK_MASK;
}
/**
/* We assume here that LEB zero is never an LPT LEB */
if (nnode->nbranch[iip].lnum)
return ubifs_get_pnode(c, nnode, iip);
- else
- return NULL;
}
/* Go up while can't go right */
list_add_tail(&orphan->list, &c->orph_list);
list_add_tail(&orphan->new_list, &c->orph_new);
spin_unlock(&c->orphan_lock);
- dbg_gen("ino %lu", inum);
+ dbg_gen("ino %lu", (unsigned long)inum);
return 0;
}
else {
if (o->dnext) {
spin_unlock(&c->orphan_lock);
- dbg_gen("deleted twice ino %lu", inum);
+ dbg_gen("deleted twice ino %lu",
+ (unsigned long)inum);
return;
}
if (o->cnext) {
o->dnext = c->orph_dnext;
c->orph_dnext = o;
spin_unlock(&c->orphan_lock);
- dbg_gen("delete later ino %lu", inum);
+ dbg_gen("delete later ino %lu",
+ (unsigned long)inum);
return;
}
rb_erase(p, &c->orph_tree);
}
spin_unlock(&c->orphan_lock);
kfree(o);
- dbg_gen("inum %lu", inum);
+ dbg_gen("inum %lu", (unsigned long)inum);
return;
}
}
spin_unlock(&c->orphan_lock);
- dbg_err("missing orphan ino %lu", inum);
+ dbg_err("missing orphan ino %lu", (unsigned long)inum);
dbg_dump_stack();
}
rb_erase(&orphan->rb, &c->orph_tree);
list_del(&orphan->list);
c->tot_orphans -= 1;
- dbg_gen("deleting orphan ino %lu", orphan->inum);
+ dbg_gen("deleting orphan ino %lu", (unsigned long)orphan->inum);
kfree(orphan);
}
c->orph_dnext = NULL;
list_add_tail(&orphan->list, &c->orph_list);
orphan->dnext = c->orph_dnext;
c->orph_dnext = orphan;
- dbg_mnt("ino %lu, new %d, tot %d",
- inum, c->new_orphans, c->tot_orphans);
+ dbg_mnt("ino %lu, new %d, tot %d", (unsigned long)inum,
+ c->new_orphans, c->tot_orphans);
return 0;
}
n = (le32_to_cpu(orph->ch.len) - UBIFS_ORPH_NODE_SZ) >> 3;
for (i = 0; i < n; i++) {
inum = le64_to_cpu(orph->inos[i]);
- dbg_rcvry("deleting orphaned inode %lu", inum);
+ dbg_rcvry("deleting orphaned inode %lu",
+ (unsigned long)inum);
err = ubifs_tnc_remove_ino(c, inum);
if (err)
return err;
if (inum != ci->last_ino) {
/* Lowest node type is the inode node, so it comes first */
if (key_type(c, &zbr->key) != UBIFS_INO_KEY)
- ubifs_err("found orphan node ino %lu, type %d", inum,
- key_type(c, &zbr->key));
+ ubifs_err("found orphan node ino %lu, type %d",
+ (unsigned long)inum, key_type(c, &zbr->key));
ci->last_ino = inum;
ci->tot_inos += 1;
err = ubifs_tnc_read_node(c, zbr, ci->node);
/* Must be recorded as an orphan */
if (!dbg_find_check_orphan(&ci->root, inum) &&
!dbg_find_orphan(c, inum)) {
- ubifs_err("missing orphan, ino %lu", inum);
+ ubifs_err("missing orphan, ino %lu",
+ (unsigned long)inum);
ci->missing += 1;
}
}
struct ubifs_mst_node *mst)
{
int err = 0, lnum = UBIFS_MST_LNUM, sz = c->mst_node_alsz;
- uint32_t save_flags;
+ __le32 save_flags;
dbg_rcvry("recovery");
save_flags = mst->flags;
- mst->flags = cpu_to_le32(le32_to_cpu(mst->flags) | UBIFS_MST_RCVRY);
+ mst->flags |= cpu_to_le32(UBIFS_MST_RCVRY);
ubifs_prepare_node(c, mst, UBIFS_MST_NODE_SZ, 1);
err = ubi_leb_change(c->ubi, lnum, mst, sz, UBI_SHORTTERM);
err = ubi_leb_change(c->ubi, lnum, c->sbuf, len, UBI_UNKNOWN);
if (err)
goto out;
- dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ", e->inum, lnum, offs,
- i_size, e->d_size);
+ dbg_rcvry("inode %lu at %d:%d size %lld -> %lld ",
+ (unsigned long)e->inum, lnum, offs, i_size, e->d_size);
return 0;
out:
ubifs_warn("inode %lu failed to fix size %lld -> %lld error %d",
- e->inum, e->i_size, e->d_size, err);
+ (unsigned long)e->inum, e->i_size, e->d_size, err);
return err;
}
return err;
if (err == -ENOENT) {
/* Remove data nodes that have no inode */
- dbg_rcvry("removing ino %lu", e->inum);
+ dbg_rcvry("removing ino %lu",
+ (unsigned long)e->inum);
err = ubifs_tnc_remove_ino(c, e->inum);
if (err)
return err;
return PTR_ERR(inode);
if (inode->i_size < e->d_size) {
dbg_rcvry("ino %lu size %lld -> %lld",
- e->inum, e->d_size,
- inode->i_size);
+ (unsigned long)e->inum,
+ e->d_size, inode->i_size);
inode->i_size = e->d_size;
ubifs_inode(inode)->ui_size = e->d_size;
e->inode = inode;
ubifs_assert(c->bud_bytes <= c->max_bud_bytes || c->need_recovery);
dbg_mnt("finished, log head LEB %d:%d, max_sqnum %llu, "
"highest_inum %lu", c->lhead_lnum, c->lhead_offs, c->max_sqnum,
- c->highest_inum);
+ (unsigned long)c->highest_inum);
out:
destroy_replay_tree(c);
destroy_bud_list(c);
int lpt_lebs, lpt_first, orph_lebs, big_lpt, ino_waste, sup_flags = 0;
int min_leb_cnt = UBIFS_MIN_LEB_CNT;
uint64_t tmp64, main_bytes;
+ __le64 tmp_le64;
/* Some functions called from here depend on the @c->key_len filed */
c->key_len = UBIFS_SK_LEN;
ino->ch.node_type = UBIFS_INO_NODE;
ino->creat_sqnum = cpu_to_le64(++c->max_sqnum);
ino->nlink = cpu_to_le32(2);
- tmp = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
- ino->atime_sec = tmp;
- ino->ctime_sec = tmp;
- ino->mtime_sec = tmp;
+ tmp_le64 = cpu_to_le64(CURRENT_TIME_SEC.tv_sec);
+ ino->atime_sec = tmp_le64;
+ ino->ctime_sec = tmp_le64;
+ ino->mtime_sec = tmp_le64;
ino->atime_nsec = 0;
ino->ctime_nsec = 0;
ino->mtime_nsec = 0;
#include <linux/mount.h>
#include "ubifs.h"
+/*
+ * Maximum amount of memory we may 'kmalloc()' without worrying that we are
+ * allocating too much.
+ */
+#define UBIFS_KMALLOC_OK (128*1024)
+
/* Slab cache for UBIFS inodes */
struct kmem_cache *ubifs_inode_slab;
* calculations when reporting free space.
*/
c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
- /* Buffer size for bulk-reads */
- c->bulk_read_buf_size = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ;
- if (c->bulk_read_buf_size > c->leb_size)
- c->bulk_read_buf_size = c->leb_size;
- if (c->bulk_read_buf_size > 128 * 1024) {
- /* Check if we can kmalloc more than 128KiB */
- void *try = kmalloc(c->bulk_read_buf_size, GFP_KERNEL);
- kfree(try);
- if (!try)
- c->bulk_read_buf_size = 128 * 1024;
- }
+ /* Buffer size for bulk-reads */
+ c->max_bu_buf_len = UBIFS_MAX_BULK_READ * UBIFS_MAX_DATA_NODE_SZ;
+ if (c->max_bu_buf_len > c->leb_size)
+ c->max_bu_buf_len = c->leb_size;
return 0;
}
free_buds(c);
}
+/**
+ * bu_init - initialize bulk-read information.
+ * @c: UBIFS file-system description object
+ */
+static void bu_init(struct ubifs_info *c)
+{
+ ubifs_assert(c->bulk_read == 1);
+
+ if (c->bu.buf)
+ return; /* Already initialized */
+
+again:
+ c->bu.buf = kmalloc(c->max_bu_buf_len, GFP_KERNEL | __GFP_NOWARN);
+ if (!c->bu.buf) {
+ if (c->max_bu_buf_len > UBIFS_KMALLOC_OK) {
+ c->max_bu_buf_len = UBIFS_KMALLOC_OK;
+ goto again;
+ }
+
+ /* Just disable bulk-read */
+ ubifs_warn("Cannot allocate %d bytes of memory for bulk-read, "
+ "disabling it", c->max_bu_buf_len);
+ c->mount_opts.bulk_read = 1;
+ c->bulk_read = 0;
+ return;
+ }
+}
+
/**
* mount_ubifs - mount UBIFS file-system.
* @c: UBIFS file-system description object
goto out_free;
}
+ if (c->bulk_read == 1)
+ bu_init(c);
+
+ /*
+ * We have to check all CRCs, even for data nodes, when we mount the FS
+ * (specifically, when we are replaying).
+ */
c->always_chk_crc = 1;
err = ubifs_read_superblock(c);
out_dereg:
dbg_failure_mode_deregistration(c);
out_free:
+ kfree(c->bu.buf);
vfree(c->ileb_buf);
vfree(c->sbuf);
kfree(c->bottom_up_buf);
kfree(c->cbuf);
kfree(c->rcvrd_mst_node);
kfree(c->mst_node);
+ kfree(c->bu.buf);
+ vfree(c->ileb_buf);
vfree(c->sbuf);
kfree(c->bottom_up_buf);
UBIFS_DBG(vfree(c->dbg_buf));
- vfree(c->ileb_buf);
dbg_failure_mode_deregistration(c);
}
ubifs_err("invalid or unknown remount parameter");
return err;
}
+
if ((sb->s_flags & MS_RDONLY) && !(*flags & MS_RDONLY)) {
err = ubifs_remount_rw(c);
if (err)
} else if (!(sb->s_flags & MS_RDONLY) && (*flags & MS_RDONLY))
ubifs_remount_ro(c);
+ if (c->bulk_read == 1)
+ bu_init(c);
+ else {
+ dbg_gen("disable bulk-read");
+ kfree(c->bu.buf);
+ c->bu.buf = NULL;
+ }
+
return 0;
}
mutex_init(&c->log_mutex);
mutex_init(&c->mst_mutex);
mutex_init(&c->umount_mutex);
+ mutex_init(&c->bu_mutex);
init_waitqueue_head(&c->cmt_wq);
c->buds = RB_ROOT;
c->old_idx = RB_ROOT;
* @bu: bulk-read parameters and results
*
* Lookup consecutive data node keys for the same inode that reside
- * consecutively in the same LEB.
+ * consecutively in the same LEB. This function returns zero in case of success
+ * and a negative error code in case of failure.
+ *
+ * Note, if the bulk-read buffer length (@bu->buf_len) is known, this function
+ * makes sure bulk-read nodes fit the buffer. Otherwise, this function prepares
+ * maxumum possible amount of nodes for bulk-read.
*/
int ubifs_tnc_get_bu_keys(struct ubifs_info *c, struct bu_info *bu)
{
struct ubifs_dent_node *xent, *pxent = NULL;
struct qstr nm = { .name = NULL };
- dbg_tnc("ino %lu", inum);
+ dbg_tnc("ino %lu", (unsigned long)inum);
/*
* Walk all extended attribute entries and remove them together with
}
xattr_inum = le64_to_cpu(xent->inum);
- dbg_tnc("xent '%s', ino %lu", xent->name, xattr_inum);
+ dbg_tnc("xent '%s', ino %lu", xent->name,
+ (unsigned long)xattr_inum);
nm.name = xent->name;
nm.len = le16_to_cpu(xent->nlen);
};
/**
- * struct bu_info - bulk-read information
+ * struct bu_info - bulk-read information.
* @key: first data node key
* @zbranch: zbranches of data nodes to bulk read
* @buf: buffer to read into
* @mst_node: master node
* @mst_offs: offset of valid master node
* @mst_mutex: protects the master node area, @mst_node, and @mst_offs
- * @bulk_read_buf_size: buffer size for bulk-reads
+ *
+ * @max_bu_buf_len: maximum bulk-read buffer length
+ * @bu_mutex: protects the pre-allocated bulk-read buffer and @c->bu
+ * @bu: pre-allocated bulk-read information
*
* @log_lebs: number of logical eraseblocks in the log
* @log_bytes: log size in bytes
struct ubifs_mst_node *mst_node;
int mst_offs;
struct mutex mst_mutex;
- int bulk_read_buf_size;
+
+ int max_bu_buf_len;
+ struct mutex bu_mutex;
+ struct bu_info bu;
int log_lebs;
long long log_bytes;
udf_truncate_tail_extent(inode);
unlock_kernel();
write_inode_now(inode, 0);
+ invalidate_inode_buffers(inode);
}
iinfo = UDF_I(inode);
kfree(iinfo->i_ext.i_data);
if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
(target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
error = XFS_ERROR(EXDEV);
- xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+ xfs_rename_unlock4(inodes, XFS_ILOCK_EXCL);
xfs_trans_cancel(tp, cancel_flags);
goto std_return;
}
/* Defaults for debug_level, debug and normal */
-#define ACPI_DEBUG_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
+#define ACPI_DEBUG_DEFAULT (ACPI_LV_INFO)
#define ACPI_NORMAL_DEFAULT (ACPI_LV_INIT | ACPI_LV_DEBUG_OBJECT)
#define ACPI_DEBUG_ALL (ACPI_LV_AML_DISASSEMBLE | ACPI_LV_ALL_EXCEPTIONS | ACPI_LV_ALL)
{.info = {"_BFS", 1, 0}},
{.info = {"_BIF", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER,
9,
- ACPI_RTYPE_STRING, 4, 0}}, /* fixed (9 Int),(4 Str) */
+ ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER, 4, 0}}, /* fixed (9 Int),(4 Str) */
{.info = {"_BLT", 3, 0}},
{.info = {"_BMC", 1, 0}},
{.info = {"_BMD", 0, ACPI_RTYPE_PACKAGE}}, {.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 5, 0, 0, 0}}, /* fixed (5 Int) */
/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
- {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_PACKAGE}},
+ {.info = {"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
{.ret_info = {ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0}}, /* fixed (2 Int), but is optional */
{.ret_info = {0, 0, 0, 0, 0, 0}} /* Table terminator */
};
/*
* We need to show where it is safe to preempt execution of ACPICA
*/
-#define ACPI_PREEMPTION_POINT() cond_resched()
+#define ACPI_PREEMPTION_POINT() \
+ do { \
+ if (!irqs_disabled()) \
+ cond_resched(); \
+ } while (0)
#endif /* __ACLINUX_H__ */
#define atomic_long_cmpxchg(l, old, new) \
(atomic_cmpxchg((atomic_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic_t *)(l), (new)))
+ (atomic_xchg((atomic_t *)(v), (new)))
#endif /* BITS_PER_LONG == 64 */
#include <asm-generic/audit_dir_write.h>
__NR_acct,
+#ifdef __NR_swapon
__NR_swapon,
+#endif
__NR_quotactl,
__NR_truncate,
#ifdef __NR_truncate64
" .section .fixup,\"ax\" \n" \
"4: \n" \
" mov %5,%0 \n" \
- " jmp 2b \n" \
+ " jmp 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\"\n" \
" .balign 4 \n" \
extern void drm_handle_vblank(struct drm_device *dev, int crtc);
extern int drm_vblank_get(struct drm_device *dev, int crtc);
extern void drm_vblank_put(struct drm_device *dev, int crtc);
+extern void drm_vblank_cleanup(struct drm_device *dev);
/* Modesetting support */
extern int drm_modeset_ctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
#ifdef CONFIG_AUDITSYSCALL
/* These are defined in auditsc.c */
/* Public API */
+extern void audit_finish_fork(struct task_struct *child);
extern int audit_alloc(struct task_struct *task);
extern void audit_free(struct task_struct *task);
extern void audit_syscall_entry(int arch,
/* Private API (for audit.c only) */
extern unsigned int audit_serial(void);
-extern void auditsc_get_stamp(struct audit_context *ctx,
+extern int auditsc_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial);
extern int audit_set_loginuid(struct task_struct *task, uid_t loginuid);
#define audit_get_loginuid(t) ((t)->loginuid)
extern int audit_n_rules;
extern int audit_signals;
#else
+#define audit_finish_fork(t)
#define audit_alloc(t) ({ 0; })
#define audit_free(t) do { ; } while (0)
#define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
#define audit_inode(n,d) do { ; } while (0)
#define audit_inode_child(d,i,p) do { ; } while (0)
#define audit_core_dumps(i) do { ; } while (0)
-#define auditsc_get_stamp(c,t,s) do { BUG(); } while (0)
+#define auditsc_get_stamp(c,t,s) (0)
#define audit_get_loginuid(t) (-1)
#define audit_get_sessionid(t) (-1)
#define audit_log_task_context(b) do { ; } while (0)
* default timeout for SG_IO if none specified
*/
#define BLK_DEFAULT_SG_TIMEOUT (60 * HZ)
+#define BLK_MIN_SG_TIMEOUT (7 * HZ)
#ifdef CONFIG_BOUNCE
extern int init_emergency_isa_pool(void);
blk_run_backing_dev(mapping->backing_dev_info, NULL);
}
+extern void blkdev_dequeue_request(struct request *req);
+
/*
* blk_end_request() and friends.
* __blk_end_request() and end_request() must be called with
extern unsigned int blk_rq_bytes(struct request *rq);
extern unsigned int blk_rq_cur_bytes(struct request *rq);
-static inline void blkdev_dequeue_request(struct request *req)
-{
- elv_dequeue_request(req->q, req);
-}
-
/*
* Access functions for manipulating queue properties
*/
#define MAX_SEGMENT_SIZE 65536
+#define BLK_SEG_BOUNDARY_MASK 0xFFFFFFFFUL
+
#define blkdev_entry_to_request(entry) list_entry((entry), struct request, queuelist)
static inline int queue_hardsect_size(struct request_queue *q)
#include <linux/skbuff.h>
#include <linux/netdevice.h>
-#define CAN_VERSION "20071116"
+#define CAN_VERSION "20081130"
/* increment this number each time you change some user-space interface */
#define CAN_ABI_VERSION "8"
compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
-#ifdef __ARCH_WANT_COMPAT_SYS_PTRACE
extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t addr, compat_ulong_t data);
asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
compat_long_t addr, compat_long_t data);
-#endif /* __ARCH_WANT_COMPAT_SYS_PTRACE */
/*
* epoll (fs/eventpoll.c) compat bits follow ...
#define MAY_ACCESS 16
#define MAY_OPEN 32
-#define FMODE_READ ((__force fmode_t)1)
-#define FMODE_WRITE ((__force fmode_t)2)
-
-/* Internal kernel extensions */
-#define FMODE_LSEEK ((__force fmode_t)4)
-#define FMODE_PREAD ((__force fmode_t)8)
-#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
-
-/* File is being opened for execution. Primary users of this flag are
- distributed filesystems that can use it to achieve correct ETXTBUSY
- behavior for cross-node execution/opening_for_writing of files */
-#define FMODE_EXEC ((__force fmode_t)16)
-
-#define FMODE_NDELAY ((__force fmode_t)32)
-#define FMODE_EXCL ((__force fmode_t)64)
+/* file is open for reading */
+#define FMODE_READ ((__force fmode_t)1)
+/* file is open for writing */
+#define FMODE_WRITE ((__force fmode_t)2)
+/* file is seekable */
+#define FMODE_LSEEK ((__force fmode_t)4)
+/* file can be accessed using pread/pwrite */
+#define FMODE_PREAD ((__force fmode_t)8)
+#define FMODE_PWRITE FMODE_PREAD /* These go hand in hand */
+/* File is opened for execution with sys_execve / sys_uselib */
+#define FMODE_EXEC ((__force fmode_t)16)
+/* File is opened with O_NDELAY (only set for block devices) */
+#define FMODE_NDELAY ((__force fmode_t)32)
+/* File is opened with O_EXCL (only set for block devices) */
+#define FMODE_EXCL ((__force fmode_t)64)
+/* File is opened using open(.., 3, ..) and is writeable only for ioctls
+ (specialy hack for floppy.c) */
#define FMODE_WRITE_IOCTL ((__force fmode_t)128)
-#define FMODE_NDELAY_NOW ((__force fmode_t)256)
#define RW_MASK 1
#define RWA_MASK 2
#include <linux/ktime.h>
#include <linux/init.h>
#include <linux/types.h>
+#include <linux/module.h>
#include <linux/kallsyms.h>
#ifdef CONFIG_FUNCTION_TRACER
struct boot_trace {
pid_t caller;
- char func[KSYM_NAME_LEN];
+ char func[KSYM_SYMBOL_LEN];
int result;
unsigned long long duration; /* usecs */
ktime_t calltime;
#endif /* CONFIG_HIGHMEM */
/* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */
+#ifndef clear_user_highpage
static inline void clear_user_highpage(struct page *page, unsigned long vaddr)
{
void *addr = kmap_atomic(page, KM_USER0);
clear_user_page(addr, vaddr, page);
kunmap_atomic(addr, KM_USER0);
}
+#endif
#ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
/**
#define ide_pci_register_driver(d) pci_register_driver(d)
#endif
+static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
+ return 1;
+ return 0;
+}
+
void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int,
hw_regs_t *, hw_regs_t **);
void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
IDE_HFLAG_IO_32BIT = (1 << 24),
/* unmask IRQs */
IDE_HFLAG_UNMASK_IRQS = (1 << 25),
+ IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26),
/* serialize ports if DMA is possible (for sl82c105) */
IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
/* force host out of "simplex" mode */
unsigned long bitmap; /* A zero bit means "space here" */
struct idr_layer *ary[1<<IDR_BITS];
int count; /* When zero, we can release it */
+ int layer; /* distance from leaf */
struct rcu_head rcu_head;
};
struct idr {
struct idr_layer *top;
struct idr_layer *id_free;
- int layers;
+ int layers; /* only valid without concurrent changes */
int id_free_cnt;
spinlock_t lock;
};
#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
#define SW_DOCK 0x05 /* set = plugged into dock */
+#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
+#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
#define IRQ_MOVE_PENDING 0x00200000 /* need to re-target IRQ destination */
#define IRQ_NO_BALANCING 0x00400000 /* IRQ is excluded from balancing */
#define IRQ_SPURIOUS_DISABLED 0x00800000 /* IRQ was disabled by the spurious trap */
-#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_MOVE_PCNTXT 0x01000000 /* IRQ migration from process context */
+#define IRQ_AFFINITY_SET 0x02000000 /* IRQ affinity was set from userspace*/
#ifdef CONFIG_IRQ_PER_CPU
# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
/**
* struct irq_desc - interrupt descriptor
- *
+ * @irq: interrupt number for this descriptor
* @handle_irq: highlevel irq-events handler [if NULL, __do_IRQ()]
* @chip: low level interrupt hardware access
* @msi_desc: MSI descriptor
* @cpu: cpu index useful for balancing
* @pending_mask: pending rebalanced interrupts
* @dir: /proc/irq/ procfs entry
- * @affinity_entry: /proc/irq/smp_affinity procfs entry on SMP
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
#ifdef CONFIG_GENERIC_PENDING_IRQ
-void set_pending_irq(unsigned int irq, cpumask_t mask);
void move_native_irq(int irq);
void move_masked_irq(int irq);
{
}
-static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
-}
-
#endif /* CONFIG_GENERIC_PENDING_IRQ */
#else /* CONFIG_SMP */
ATA_HORKAGE_BRIDGE_OK = (1 << 10), /* no bridge limits */
ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
not multiple of 16 bytes */
+ ATA_HORKAGE_FIRMWARE_WARN = (1 << 12), /* firwmare update warning */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
#ifdef CONFIG_MEMORY_HOTPLUG
#define hotplug_memory_notifier(fn, pri) { \
- static struct notifier_block fn##_mem_nb = \
+ static __meminitdata struct notifier_block fn##_mem_nb =\
{ .notifier_call = fn, .priority = pri }; \
register_memory_notifier(&fn##_mem_nb); \
}
/*
* audio.h -- Audio Driver for Wolfson WM8350 PMIC
*
- * Copyright 2007 Wolfson Microelectronics PLC
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
#define WM8350_CODEC_ISEL_0_5 3 /* x0.5 */
#define WM8350_VMID_OFF 0
-#define WM8350_VMID_500K 1
-#define WM8350_VMID_100K 2
-#define WM8350_VMID_10K 3
+#define WM8350_VMID_300K 1
+#define WM8350_VMID_50K 2
+#define WM8350_VMID_5K 3
/*
* R40 (0x28) - Clock Control 1
#define WM8350_IRQ_CODEC_MICSCD 41
#define WM8350_IRQ_CODEC_MICD 42
+/*
+ * WM8350 Platform data.
+ *
+ * This must be initialised per platform for best audio performance.
+ * Please see WM8350 datasheet for information.
+ */
+struct wm8350_audio_platform_data {
+ int vmid_discharge_msecs; /* VMID --> OFF discharge time */
+ int drain_msecs; /* OFF drain time */
+ int cap_discharge_msecs; /* Cap ON (from OFF) discharge time */
+ int vmid_charge_msecs; /* vmid power up time */
+ u32 vmid_s_curve:2; /* vmid enable s curve speed */
+ u32 dis_out4:2; /* out4 discharge speed */
+ u32 dis_out3:2; /* out3 discharge speed */
+ u32 dis_out2:2; /* out2 discharge speed */
+ u32 dis_out1:2; /* out1 discharge speed */
+ u32 vroi_out4:1; /* out4 tie off */
+ u32 vroi_out3:1; /* out3 tie off */
+ u32 vroi_out2:1; /* out2 tie off */
+ u32 vroi_out1:1; /* out1 tie off */
+ u32 vroi_enable:1; /* enable tie off */
+ u32 codec_current_on:2; /* current level ON */
+ u32 codec_current_standby:2; /* current level STANDBY */
+ u32 codec_current_charge:2; /* codec current @ vmid charge */
+};
+
+struct snd_soc_codec;
+
struct wm8350_codec {
struct platform_device *pdev;
+ struct snd_soc_codec *codec;
+ struct wm8350_audio_platform_data *platform_data;
};
#endif
int num_ports;
int vl_cap[MLX4_MAX_PORTS + 1];
int ib_mtu_cap[MLX4_MAX_PORTS + 1];
+ __be32 ib_port_def_cap[MLX4_MAX_PORTS + 1];
u64 def_mac[MLX4_MAX_PORTS + 1];
int eth_mtu_cap[MLX4_MAX_PORTS + 1];
int gid_table_len[MLX4_MAX_PORTS + 1];
{
NAPI_STATE_SCHED, /* Poll is scheduled */
NAPI_STATE_DISABLE, /* Disable pending */
+ NAPI_STATE_NPSVC, /* Netpoll - don't dequeue from poll_list */
};
extern void __napi_schedule(struct napi_struct *n);
{
unsigned long flags;
+ /*
+ * don't let napi dequeue from the cpu poll list
+ * just in case its running on a different cpu
+ */
+ if (unlikely(test_bit(NAPI_STATE_NPSVC, &napi->state)))
+ return;
local_irq_save(flags);
__netif_rx_complete(dev, napi);
local_irq_restore(flags);
#define CTA_PROTONAT_MAX (__CTA_PROTONAT_MAX - 1)
enum ctattr_natseq {
+ CTA_NAT_SEQ_UNSPEC,
CTA_NAT_SEQ_CORRECTION_POS,
CTA_NAT_SEQ_OFFSET_BEFORE,
CTA_NAT_SEQ_OFFSET_AFTER,
*/
struct xt_tgchk_param {
const char *table;
- void *entryinfo;
+ const void *entryinfo;
const struct xt_target *target;
void *targinfo;
unsigned int hook_mask;
struct list_head lru; /* per cgroup LRU list */
};
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat);
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat);
void __init page_cgroup_init(void);
struct page_cgroup *lookup_page_cgroup(struct page *page);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct page_cgroup;
-static inline void pgdat_page_cgroup_init(struct pglist_data *pgdat)
+static inline void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
}
atomic_t inotify_watches; /* How many inotify watches does this user have? */
atomic_t inotify_devs; /* How many inotify devs does this user have opened? */
#endif
+#ifdef CONFIG_EPOLL
+ atomic_t epoll_devs; /* The number of epoll descriptors currently open */
+ atomic_t epoll_watches; /* The number of file descriptors currently watched */
+#endif
#ifdef CONFIG_POSIX_MQUEUE
/* protected by mq_lock */
unsigned long mq_bytes; /* How many bytes can be allocated to mqueue? */
static inline int security_vm_enough_memory(long pages)
{
+ WARN_ON(current->mm == NULL);
return cap_vm_enough_memory(current->mm, pages);
}
-static inline int security_vm_enough_memory_kern(long pages)
+static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
{
- return cap_vm_enough_memory(current->mm, pages);
+ WARN_ON(mm == NULL);
+ return cap_vm_enough_memory(mm, pages);
}
-static inline int security_vm_enough_memory_mm(struct mm_struct *mm, long pages)
+static inline int security_vm_enough_memory_kern(long pages)
{
- return cap_vm_enough_memory(mm, pages);
+ /* If current->mm is a kernel thread then we will pass NULL,
+ for this specific case that is fine */
+ return cap_vm_enough_memory(current->mm, pages);
}
static inline int security_bprm_alloc(struct linux_binprm *bprm)
})
#define smp_call_function_mask(mask, func, info, wait) \
(up_smp_call_function(func, info))
+#define smp_call_function_many(mask, func, info, wait) \
+ (up_smp_call_function(func, info))
static inline void init_call_single_data(void)
{
}
* (rarely) accepted by SET_DESCRIPTOR.
*
* Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
+ * byte order "on the wire". Within the kernel and when exposed
+ * through the Linux-USB APIs, they are not converted to cpu byte
+ * order; it is the responsibility of the client code to do this.
+ * The single exception is when device and configuration descriptors (but
+ * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * in this case the fields are converted to host endianness by the kernel.
*/
/*
extern void unix_inflight(struct file *fp);
extern void unix_notinflight(struct file *fp);
extern void unix_gc(void);
+extern void wait_for_unix_gc(void);
#define UNIX_HASH_SIZE 256
/*
* Per-packet information we need to hide inside sk_buff
- * (must not exceed 48 bytes, check with struct sk_buff)
+ * (must not exceed 48 bytes, check with struct sk_buff)
+ * The default_qdisc_pad field is a temporary hack.
*/
struct irda_skb_cb {
+ unsigned int default_qdisc_pad;
magic_t magic; /* Be sure that we can trust the information */
__u32 next_speed; /* The Speed to be set *after* this frame */
__u16 mtt; /* Minimum turn around time */
int family;
int obj_size;
struct kmem_cache *slab;
+ char *slab_name;
int (*rtx_syn_ack)(struct sock *sk,
struct request_sock *req);
void (*send_ack)(struct sock *sk, struct sk_buff *skb,
struct timewait_sock_ops {
struct kmem_cache *twsk_slab;
+ char *twsk_slab_name;
unsigned int twsk_obj_size;
int (*twsk_unique)(struct sock *sk,
struct sock *sktw, void *twp);
/* bit field values for struct fc_rport "flags" field: */
#define FC_RPORT_DEVLOSS_PENDING 0x01
#define FC_RPORT_SCAN_PENDING 0x02
-#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x03
+#define FC_RPORT_FAST_FAIL_TIMEDOUT 0x04
#define dev_to_rport(d) \
container_of(d, struct fc_rport, dev)
/* specific - Analog Devices */
#define AC97_AD_TEST 0x5a /* test register */
#define AC97_AD_TEST2 0x5c /* undocumented test register 2 */
+#define AC97_AD_HPFD_SHIFT 12 /* High Pass Filter Disable */
#define AC97_AD_CODEC_CFG 0x70 /* codec configuration */
#define AC97_AD_JACK_SPDIF 0x72 /* Jack Sense & S/PDIF */
#define AC97_AD_SERIAL_CFG 0x74 /* Serial Configuration */
#define AC97_AD_MISC 0x76 /* Misc Control Bits */
+#define AC97_AD_VREFD_SHIFT 2 /* V_REFOUT Disable (AD1888) */
/* specific - Cirrus Logic */
#define AC97_CSR_ACMODE 0x5e /* AC Mode Register */
* snd_printk - printk wrapper
* @fmt: format string
*
- * Works like print() but prints the file and the line of the caller
+ * Works like printk() but prints the file and the line of the caller
* when configured with CONFIG_SND_VERBOSE_PRINTK.
*/
#define snd_printk(fmt, args...) \
printk(fmt ,##args)
#endif
+/**
+ * snd_BUG - give a BUG warning message and stack trace
+ *
+ * Calls WARN() if CONFIG_SND_DEBUG is set.
+ * Ignored when CONFIG_SND_DEBUG is not set.
+ */
#define snd_BUG() WARN(1, "BUG?\n")
+
+/**
+ * snd_BUG_ON - debugging check macro
+ * @cond: condition to evaluate
+ *
+ * When CONFIG_SND_DEBUG is set, this macro evaluates the given condition,
+ * and call WARN() and returns the value if it's non-zero.
+ *
+ * When CONFIG_SND_DEBUG is not set, this just returns zero, and the given
+ * condition is ignored.
+ *
+ * NOTE: the argument won't be evaluated at all when CONFIG_SND_DEBUG=n.
+ * Thus, don't put any statement that influences on the code behavior,
+ * such as pre/post increment, to the argument of this macro.
+ * If you want to evaluate and give a warning, use standard WARN_ON().
+ */
#define snd_BUG_ON(cond) WARN((cond), "BUG? (%s)\n", __stringify(cond))
#else /* !CONFIG_SND_DEBUG */
#define snd_printd(fmt, args...) do { } while (0)
#define snd_BUG() do { } while (0)
-static inline int __snd_bug_on(void)
+static inline int __snd_bug_on(int cond)
{
return 0;
}
-#define snd_BUG_ON(cond) __snd_bug_on() /* always false */
+#define snd_BUG_ON(cond) __snd_bug_on(0 && (cond)) /* always false */
#endif /* CONFIG_SND_DEBUG */
SND_JACK_HEADPHONE = 0x0001,
SND_JACK_MICROPHONE = 0x0002,
SND_JACK_HEADSET = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE,
+ SND_JACK_LINEOUT = 0x0004,
+ SND_JACK_MECHANICAL = 0x0008, /* If detected separately */
};
struct snd_jack {
--- /dev/null
+#ifndef _L3_H_
+#define _L3_H_ 1
+
+struct l3_pins {
+ void (*setdat)(int);
+ void (*setclk)(int);
+ void (*setmode)(int);
+ int data_hold;
+ int data_setup;
+ int clock_high;
+ int mode_hold;
+ int mode;
+ int mode_setup;
+};
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len);
+
+#endif
--- /dev/null
+#ifndef _S3C24XX_UDA134X_H_
+#define _S3C24XX_UDA134X_H_ 1
+
+#include <sound/uda134x.h>
+
+struct s3c24xx_uda134x_platform_data {
+ int l3_clk;
+ int l3_mode;
+ int l3_data;
+ void (*power) (int);
+ int model;
+};
+
+#endif
--- /dev/null
+/*
+ * linux/sound/soc-dai.h -- ALSA SoC Layer
+ *
+ * Copyright: 2005-2008 Wolfson Microelectronics. PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Digital Audio Interface (DAI) API.
+ */
+
+#ifndef __LINUX_SND_SOC_DAI_H
+#define __LINUX_SND_SOC_DAI_H
+
+
+#include <linux/list.h>
+
+struct snd_pcm_substream;
+
+/*
+ * DAI hardware audio formats.
+ *
+ * Describes the physical PCM data formating and clocking. Add new formats
+ * to the end.
+ */
+#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */
+#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right Justified mode */
+#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */
+#define SND_SOC_DAIFMT_DSP_A 3 /* L data msb after FRM LRC */
+#define SND_SOC_DAIFMT_DSP_B 4 /* L data msb during FRM LRC */
+#define SND_SOC_DAIFMT_AC97 5 /* AC97 */
+
+/* left and right justified also known as MSB and LSB respectively */
+#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
+#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
+
+/*
+ * DAI Clock gating.
+ *
+ * DAI bit clocks can be be gated (disabled) when not the DAI is not
+ * sending or receiving PCM data in a frame. This can be used to save power.
+ */
+#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
+#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated */
+
+/*
+ * DAI Left/Right Clocks.
+ *
+ * Specifies whether the DAI can support different samples for similtanious
+ * playback and capture. This usually requires a seperate physical frame
+ * clock for playback and capture.
+ */
+#define SND_SOC_DAIFMT_SYNC (0 << 5) /* Tx FRM = Rx FRM */
+#define SND_SOC_DAIFMT_ASYNC (1 << 5) /* Tx FRM ~ Rx FRM */
+
+/*
+ * TDM
+ *
+ * Time Division Multiplexing. Allows PCM data to be multplexed with other
+ * data on the DAI.
+ */
+#define SND_SOC_DAIFMT_TDM (1 << 6)
+
+/*
+ * DAI hardware signal inversions.
+ *
+ * Specifies whether the DAI can also support inverted clocks for the specified
+ * format.
+ */
+#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bit clock + frame */
+#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal bclk + inv frm */
+#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert bclk + nor frm */
+#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert bclk + frm */
+
+/*
+ * DAI hardware clock masters.
+ *
+ * This is wrt the codec, the inverse is true for the interface
+ * i.e. if the codec is clk and frm master then the interface is
+ * clk and frame slave.
+ */
+#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & frm master */
+#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & frm master */
+#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */
+#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & frm slave */
+
+#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
+#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
+#define SND_SOC_DAIFMT_INV_MASK 0x0f00
+#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
+
+/*
+ * Master Clock Directions
+ */
+#define SND_SOC_CLOCK_IN 0
+#define SND_SOC_CLOCK_OUT 1
+
+struct snd_soc_dai_ops;
+struct snd_soc_dai;
+struct snd_ac97_bus_ops;
+
+/* Digital Audio Interface registration */
+int snd_soc_register_dai(struct snd_soc_dai *dai);
+void snd_soc_unregister_dai(struct snd_soc_dai *dai);
+int snd_soc_register_dais(struct snd_soc_dai *dai, size_t count);
+void snd_soc_unregister_dais(struct snd_soc_dai *dai, size_t count);
+
+/* Digital Audio Interface clocking API.*/
+int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
+ unsigned int freq, int dir);
+
+int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
+ int div_id, int div);
+
+int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out);
+
+/* Digital Audio interface formatting */
+int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
+
+int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
+ unsigned int mask, int slots);
+
+int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
+
+/* Digital Audio Interface mute */
+int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute);
+
+/*
+ * Digital Audio Interface.
+ *
+ * Describes the Digital Audio Interface in terms of it's ALSA, DAI and AC97
+ * operations an capabilities. Codec and platfom drivers will register a this
+ * structure for every DAI they have.
+ *
+ * This structure covers the clocking, formating and ALSA operations for each
+ * interface a
+ */
+struct snd_soc_dai_ops {
+ /*
+ * DAI clocking configuration, all optional.
+ * Called by soc_card drivers, normally in their hw_params.
+ */
+ int (*set_sysclk)(struct snd_soc_dai *dai,
+ int clk_id, unsigned int freq, int dir);
+ int (*set_pll)(struct snd_soc_dai *dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out);
+ int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
+
+ /*
+ * DAI format configuration
+ * Called by soc_card drivers, normally in their hw_params.
+ */
+ int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
+ int (*set_tdm_slot)(struct snd_soc_dai *dai,
+ unsigned int mask, int slots);
+ int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
+
+ /*
+ * DAI digital mute - optional.
+ * Called by soc-core to minimise any pops.
+ */
+ int (*digital_mute)(struct snd_soc_dai *dai, int mute);
+
+ /*
+ * ALSA PCM audio operations - all optional.
+ * Called by soc-core during audio PCM operations.
+ */
+ int (*startup)(struct snd_pcm_substream *,
+ struct snd_soc_dai *);
+ void (*shutdown)(struct snd_pcm_substream *,
+ struct snd_soc_dai *);
+ int (*hw_params)(struct snd_pcm_substream *,
+ struct snd_pcm_hw_params *, struct snd_soc_dai *);
+ int (*hw_free)(struct snd_pcm_substream *,
+ struct snd_soc_dai *);
+ int (*prepare)(struct snd_pcm_substream *,
+ struct snd_soc_dai *);
+ int (*trigger)(struct snd_pcm_substream *, int,
+ struct snd_soc_dai *);
+};
+
+/*
+ * Digital Audio Interface runtime data.
+ *
+ * Holds runtime data for a DAI.
+ */
+struct snd_soc_dai {
+ /* DAI description */
+ char *name;
+ unsigned int id;
+ int ac97_control;
+
+ struct device *dev;
+
+ /* DAI callbacks */
+ int (*probe)(struct platform_device *pdev,
+ struct snd_soc_dai *dai);
+ void (*remove)(struct platform_device *pdev,
+ struct snd_soc_dai *dai);
+ int (*suspend)(struct snd_soc_dai *dai);
+ int (*resume)(struct snd_soc_dai *dai);
+
+ /* ops */
+ struct snd_soc_dai_ops ops;
+
+ /* DAI capabilities */
+ struct snd_soc_pcm_stream capture;
+ struct snd_soc_pcm_stream playback;
+
+ /* DAI runtime info */
+ struct snd_pcm_runtime *runtime;
+ struct snd_soc_codec *codec;
+ unsigned int active;
+ unsigned char pop_wait:1;
+ void *dma_data;
+
+ /* DAI private data */
+ void *private_data;
+
+ /* parent codec/platform */
+ union {
+ struct snd_soc_codec *codec;
+ struct snd_soc_platform *platform;
+ };
+
+ struct list_head list;
+};
+
+#endif
int num);
/* dapm path setup */
-int __deprecated snd_soc_dapm_connect_input(struct snd_soc_codec *codec,
- const char *sink_name, const char *control_name, const char *src_name);
int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec);
void snd_soc_dapm_free(struct snd_soc_device *socdev);
int snd_soc_dapm_add_routes(struct snd_soc_codec *codec,
#include <sound/control.h>
#include <sound/ac97_codec.h>
-#define SND_SOC_VERSION "0.13.2"
-
/*
* Convenience kcontrol builders
*/
SND_SOC_BIAS_OFF,
};
-/*
- * Digital Audio Interface (DAI) types
- */
-#define SND_SOC_DAI_AC97 0x1
-#define SND_SOC_DAI_I2S 0x2
-#define SND_SOC_DAI_PCM 0x4
-#define SND_SOC_DAI_AC97_BUS 0x8 /* for custom i.e. non ac97_codec.c */
-
-/*
- * DAI hardware audio formats
- */
-#define SND_SOC_DAIFMT_I2S 0 /* I2S mode */
-#define SND_SOC_DAIFMT_RIGHT_J 1 /* Right justified mode */
-#define SND_SOC_DAIFMT_LEFT_J 2 /* Left Justified mode */
-#define SND_SOC_DAIFMT_DSP_A 3 /* L data msb after FRM or LRC */
-#define SND_SOC_DAIFMT_DSP_B 4 /* L data msb during FRM or LRC */
-#define SND_SOC_DAIFMT_AC97 5 /* AC97 */
-
-#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J
-#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J
-
-/*
- * DAI Gating
- */
-#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
-#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated when not Tx/Rx */
-
-/*
- * DAI Sync
- * Synchronous LR (Left Right) clocks and Frame signals.
- */
-#define SND_SOC_DAIFMT_SYNC (0 << 5) /* Tx FRM = Rx FRM */
-#define SND_SOC_DAIFMT_ASYNC (1 << 5) /* Tx FRM ~ Rx FRM */
-
-/*
- * TDM
- */
-#define SND_SOC_DAIFMT_TDM (1 << 6)
-
-/*
- * DAI hardware signal inversions
- */
-#define SND_SOC_DAIFMT_NB_NF (0 << 8) /* normal bclk + frm */
-#define SND_SOC_DAIFMT_NB_IF (1 << 8) /* normal bclk + inv frm */
-#define SND_SOC_DAIFMT_IB_NF (2 << 8) /* invert bclk + nor frm */
-#define SND_SOC_DAIFMT_IB_IF (3 << 8) /* invert bclk + frm */
-
-/*
- * DAI hardware clock masters
- * This is wrt the codec, the inverse is true for the interface
- * i.e. if the codec is clk and frm master then the interface is
- * clk and frame slave.
- */
-#define SND_SOC_DAIFMT_CBM_CFM (0 << 12) /* codec clk & frm master */
-#define SND_SOC_DAIFMT_CBS_CFM (1 << 12) /* codec clk slave & frm master */
-#define SND_SOC_DAIFMT_CBM_CFS (2 << 12) /* codec clk master & frame slave */
-#define SND_SOC_DAIFMT_CBS_CFS (3 << 12) /* codec clk & frm slave */
-
-#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f
-#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0
-#define SND_SOC_DAIFMT_INV_MASK 0x0f00
-#define SND_SOC_DAIFMT_MASTER_MASK 0xf000
-
-
-/*
- * Master Clock Directions
- */
-#define SND_SOC_CLOCK_IN 0
-#define SND_SOC_CLOCK_OUT 1
-
-/*
- * AC97 codec ID's bitmask
- */
-#define SND_SOC_DAI_AC97_ID0 (1 << 0)
-#define SND_SOC_DAI_AC97_ID1 (1 << 1)
-#define SND_SOC_DAI_AC97_ID2 (1 << 2)
-#define SND_SOC_DAI_AC97_ID3 (1 << 3)
-
struct snd_soc_device;
struct snd_soc_pcm_stream;
struct snd_soc_ops;
struct snd_soc_dai_mode;
struct snd_soc_pcm_runtime;
struct snd_soc_dai;
+struct snd_soc_platform;
struct snd_soc_codec;
-struct snd_soc_machine_config;
struct soc_enum;
struct snd_soc_ac97_ops;
-struct snd_soc_clock_info;
typedef int (*hw_write_t)(void *,const char* ,int);
typedef int (*hw_read_t)(void *,char* ,int);
extern struct snd_ac97_bus_ops soc_ac97_ops;
+int snd_soc_register_platform(struct snd_soc_platform *platform);
+void snd_soc_unregister_platform(struct snd_soc_platform *platform);
+int snd_soc_register_codec(struct snd_soc_codec *codec);
+void snd_soc_unregister_codec(struct snd_soc_codec *codec);
+
/* pcm <-> DAI connect */
void snd_soc_free_pcms(struct snd_soc_device *socdev);
int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid);
-int snd_soc_register_card(struct snd_soc_device *socdev);
+int snd_soc_init_card(struct snd_soc_device *socdev);
/* set runtime hw params */
int snd_soc_set_runtime_hwparams(struct snd_pcm_substream *substream,
struct snd_ac97_bus_ops *ops, int num);
void snd_soc_free_ac97_codec(struct snd_soc_codec *codec);
-/* Digital Audio Interface clocking API.*/
-int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
- unsigned int freq, int dir);
-
-int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
- int div_id, int div);
-
-int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
- int pll_id, unsigned int freq_in, unsigned int freq_out);
-
-/* Digital Audio interface formatting */
-int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt);
-
-int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
-
-int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate);
-
-/* Digital Audio Interface mute */
-int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute);
-
/*
*Controls
*/
int (*trigger)(struct snd_pcm_substream *, int);
};
-/* ASoC DAI ops */
-struct snd_soc_dai_ops {
- /* DAI clocking configuration */
- int (*set_sysclk)(struct snd_soc_dai *dai,
- int clk_id, unsigned int freq, int dir);
- int (*set_pll)(struct snd_soc_dai *dai,
- int pll_id, unsigned int freq_in, unsigned int freq_out);
- int (*set_clkdiv)(struct snd_soc_dai *dai, int div_id, int div);
-
- /* DAI format configuration */
- int (*set_fmt)(struct snd_soc_dai *dai, unsigned int fmt);
- int (*set_tdm_slot)(struct snd_soc_dai *dai,
- unsigned int mask, int slots);
- int (*set_tristate)(struct snd_soc_dai *dai, int tristate);
-
- /* digital mute */
- int (*digital_mute)(struct snd_soc_dai *dai, int mute);
-};
-
-/* SoC DAI (Digital Audio Interface) */
-struct snd_soc_dai {
- /* DAI description */
- char *name;
- unsigned int id;
- unsigned char type;
-
- /* DAI callbacks */
- int (*probe)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
- void (*remove)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
- int (*suspend)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
- int (*resume)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
-
- /* ops */
- struct snd_soc_ops ops;
- struct snd_soc_dai_ops dai_ops;
-
- /* DAI capabilities */
- struct snd_soc_pcm_stream capture;
- struct snd_soc_pcm_stream playback;
-
- /* DAI runtime info */
- struct snd_pcm_runtime *runtime;
- struct snd_soc_codec *codec;
- unsigned int active;
- unsigned char pop_wait:1;
- void *dma_data;
-
- /* DAI private data */
- void *private_data;
-};
-
/* SoC Audio Codec */
struct snd_soc_codec {
char *name;
struct module *owner;
struct mutex mutex;
+ struct device *dev;
+
+ struct list_head list;
/* callbacks */
int (*set_bias_level)(struct snd_soc_codec *,
short reg_cache_step;
/* dapm */
+ u32 pop_time;
struct list_head dapm_widgets;
struct list_head dapm_paths;
enum snd_soc_bias_level bias_level;
/* codec DAI's */
struct snd_soc_dai *dai;
unsigned int num_dai;
+
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs_reg;
+ struct dentry *debugfs_pop_time;
+#endif
};
/* codec device */
/* SoC platform interface */
struct snd_soc_platform {
char *name;
+ struct list_head list;
int (*probe)(struct platform_device *pdev);
int (*remove)(struct platform_device *pdev);
- int (*suspend)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
- int (*resume)(struct platform_device *pdev,
- struct snd_soc_dai *dai);
+ int (*suspend)(struct snd_soc_dai *dai);
+ int (*resume)(struct snd_soc_dai *dai);
/* pcm creation and destruction */
int (*pcm_new)(struct snd_card *, struct snd_soc_dai *,
struct snd_pcm *pcm;
};
-/* SoC machine */
-struct snd_soc_machine {
+/* SoC card */
+struct snd_soc_card {
char *name;
+ struct device *dev;
+
+ struct list_head list;
+
+ int instantiated;
int (*probe)(struct platform_device *pdev);
int (*remove)(struct platform_device *pdev);
int (*resume_post)(struct platform_device *pdev);
/* callbacks */
- int (*set_bias_level)(struct snd_soc_machine *,
+ int (*set_bias_level)(struct snd_soc_card *,
enum snd_soc_bias_level level);
/* CPU <--> Codec DAI links */
struct snd_soc_dai_link *dai_link;
int num_links;
+
+ struct snd_soc_device *socdev;
+
+ struct snd_soc_platform *platform;
+ struct delayed_work delayed_work;
+ struct work_struct deferred_resume_work;
};
/* SoC Device - the audio subsystem */
struct snd_soc_device {
struct device *dev;
- struct snd_soc_machine *machine;
- struct snd_soc_platform *platform;
+ struct snd_soc_card *card;
struct snd_soc_codec *codec;
struct snd_soc_codec_device *codec_dev;
- struct delayed_work delayed_work;
- struct work_struct deferred_resume_work;
void *codec_data;
};
void *dapm;
};
+#include <sound/soc-dai.h>
+
#endif
--- /dev/null
+/*
+ * uda134x.h -- UDA134x ALSA SoC Codec driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UDA134X_H
+#define _UDA134X_H
+
+#include <sound/l3.h>
+
+struct uda134x_platform_data {
+ struct l3_pins l3;
+ void (*power) (int);
+ int model;
+#define UDA134X_UDA1340 1
+#define UDA134X_UDA1341 2
+#define UDA134X_UDA1344 3
+};
+
+#endif /* _UDA134X_H */
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.18rc3"
+#define CONFIG_SND_VERSION "1.0.18a"
#define CONFIG_SND_DATE ""
#define CRTC_DISPLAY_DIS (1 << 10)
#define CRTC_CRT_ON (1 << 15)
-/* DSTCACHE_MODE bits constants */
-#define RB2D_DC_AUTOFLUSH_ENABLE (1 << 8)
-#define RB2D_DC_DC_DISABLE_IGNORE_PE (1 << 17)
/* DSTCACHE_CTLSTAT bit constants */
#define RB2D_DC_FLUSH_2D (1 << 0)
#define GMC_DST_16BPP_YVYU422 0x00000c00
#define GMC_DST_32BPP_AYUV444 0x00000e00
#define GMC_DST_16BPP_ARGB4444 0x00000f00
+#define GMC_SRC_MONO 0x00000000
+#define GMC_SRC_MONO_LBKGD 0x00001000
+#define GMC_SRC_DSTCOLOR 0x00003000
#define GMC_BYTE_ORDER_MSB_TO_LSB 0x00000000
#define GMC_BYTE_ORDER_LSB_TO_MSB 0x00004000
#define GMC_DP_CONVERSION_TEMP_9300 0x00008000
#define GMC_DP_CONVERSION_TEMP_6500 0x00000000
+#define GMC_DP_SRC_RECT 0x02000000
+#define GMC_DP_SRC_HOST 0x03000000
#define GMC_DP_SRC_HOST_BYTEALIGN 0x04000000
#define GMC_3D_FCN_EN_CLR 0x00000000
#define GMC_3D_FCN_EN_SET 0x08000000
#define GMC_WRITE_MASK_LEAVE 0x00000000
#define GMC_WRITE_MASK_SET 0x40000000
#define GMC_CLR_CMP_CNTL_DIS (1 << 28)
-#define GMC_SRC_DATATYPE_MASK (3 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_BG (0 << 12)
-#define GMC_SRC_DATATYPE_MONO_FG_LA (1 << 12)
#define GMC_SRC_DATATYPE_COLOR (3 << 12)
#define ROP3_S 0x00cc0000
#define ROP3_SRCCOPY 0x00cc0000
#define DP_SRC_SOURCE_MASK (7 << 24)
#define GMC_BRUSH_NONE (15 << 4)
#define DP_SRC_SOURCE_MEMORY (2 << 24)
-#define DP_SRC_SOURCE_HOST_DATA (3 << 24)
#define GMC_BRUSH_SOLIDCOLOR 0x000000d0
/* DP_MIX bit constants */
#define DISP_PWR_MAN_TV_ENABLE_RST (1 << 25)
#define DISP_PWR_MAN_AUTO_PWRUP_EN (1 << 26)
-/* RBBM_GUICNTL constants */
-#define RBBM_GUICNTL_HOST_DATA_SWAP_NONE (0 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_16BIT (1 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_32BIT (2 << 0)
-#define RBBM_GUICNTL_HOST_DATA_SWAP_HDW (3 << 0)
-
/* masks */
#define CONFIG_MEMSIZE_MASK 0x1f000000
#include "audit.h"
-/* No auditing will take place until audit_initialized != 0.
+/* No auditing will take place until audit_initialized == AUDIT_INITIALIZED.
* (Initialization happens after skb_init is called.) */
+#define AUDIT_DISABLED -1
+#define AUDIT_UNINITIALIZED 0
+#define AUDIT_INITIALIZED 1
static int audit_initialized;
#define AUDIT_OFF 0
{
int i;
+ if (audit_initialized == AUDIT_DISABLED)
+ return 0;
+
printk(KERN_INFO "audit: initializing netlink socket (%s)\n",
audit_default ? "enabled" : "disabled");
audit_sock = netlink_kernel_create(&init_net, NETLINK_AUDIT, 0,
skb_queue_head_init(&audit_skb_queue);
skb_queue_head_init(&audit_skb_hold_queue);
- audit_initialized = 1;
+ audit_initialized = AUDIT_INITIALIZED;
audit_enabled = audit_default;
audit_ever_enabled |= !!audit_default;
static int __init audit_enable(char *str)
{
audit_default = !!simple_strtol(str, NULL, 0);
- printk(KERN_INFO "audit: %s%s\n",
- audit_default ? "enabled" : "disabled",
- audit_initialized ? "" : " (after initialization)");
- if (audit_initialized) {
+ if (!audit_default)
+ audit_initialized = AUDIT_DISABLED;
+
+ printk(KERN_INFO "audit: %s", audit_default ? "enabled" : "disabled");
+
+ if (audit_initialized == AUDIT_INITIALIZED) {
audit_enabled = audit_default;
audit_ever_enabled |= !!audit_default;
+ } else if (audit_initialized == AUDIT_UNINITIALIZED) {
+ printk(" (after initialization)");
+ } else {
+ printk(" (until reboot)");
}
+ printk("\n");
+
return 1;
}
static inline void audit_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial)
{
- if (ctx)
- auditsc_get_stamp(ctx, t, serial);
- else {
+ if (!ctx || !auditsc_get_stamp(ctx, t, serial)) {
*t = CURRENT_TIME;
*serial = audit_serial();
}
int reserve;
unsigned long timeout_start = jiffies;
- if (!audit_initialized)
+ if (audit_initialized != AUDIT_INITIALIZED)
return NULL;
if (unlikely(audit_filter_type(type)))
/**
* audit_syscall_entry - fill in an audit record at syscall entry
- * @tsk: task being audited
* @arch: architecture type
* @major: major syscall type (function)
* @a1: additional syscall register 1
context->ppid = 0;
}
+void audit_finish_fork(struct task_struct *child)
+{
+ struct audit_context *ctx = current->audit_context;
+ struct audit_context *p = child->audit_context;
+ if (!p || !ctx || !ctx->auditable)
+ return;
+ p->arch = ctx->arch;
+ p->major = ctx->major;
+ memcpy(p->argv, ctx->argv, sizeof(ctx->argv));
+ p->ctime = ctx->ctime;
+ p->dummy = ctx->dummy;
+ p->auditable = ctx->auditable;
+ p->in_syscall = ctx->in_syscall;
+ p->filterkey = kstrdup(ctx->filterkey, GFP_KERNEL);
+ p->ppid = current->pid;
+}
+
/**
* audit_syscall_exit - deallocate audit context after a system call
- * @tsk: task being audited
* @valid: success/failure flag
* @return_code: syscall return value
*
*
* Also sets the context as auditable.
*/
-void auditsc_get_stamp(struct audit_context *ctx,
+int auditsc_get_stamp(struct audit_context *ctx,
struct timespec *t, unsigned int *serial)
{
+ if (!ctx->in_syscall)
+ return 0;
if (!ctx->serial)
ctx->serial = audit_serial();
t->tv_sec = ctx->ctime.tv_sec;
t->tv_nsec = ctx->ctime.tv_nsec;
*serial = ctx->serial;
ctx->auditable = 1;
+ return 1;
}
/* global counter which is incremented every time something logs in */
* any child cgroups exist. This is theoretically supportable
* but involves complex error handling, so it's being left until
* later */
- if (!list_empty(&cgrp->children))
+ if (root->number_of_cgroups > 1)
return -EBUSY;
/* Process each subsystem */
if (ret == -EBUSY) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
- goto drop_new_super;
+ goto free_cg_links;
}
/* EBUSY should be the only error here */
return simple_set_mnt(mnt, sb);
+ free_cg_links:
+ free_cg_links(&tmp_cg_links);
drop_new_super:
up_write(&sb->s_umount);
deactivate_super(sb);
- free_cg_links(&tmp_cg_links);
return ret;
}
again:
root = subsys->root;
if (root == &rootnode) {
- printk(KERN_INFO
- "Not cloning cgroup for unused subsystem %s\n",
- subsys->name);
mutex_unlock(&cgroup_mutex);
return 0;
}
* It must be called by the arch code on the new cpu, before the new cpu
* enables interrupts and before the "boot" cpu returns from __cpu_up().
*/
-void notify_cpu_starting(unsigned int cpu)
+void __cpuinit notify_cpu_starting(unsigned int cpu)
{
unsigned long val = CPU_STARTING;
int i, j, k; /* indices for partition finding loops */
cpumask_t *doms; /* resulting partition; i.e. sched domains */
struct sched_domain_attr *dattr; /* attributes for custom domains */
- int ndoms; /* number of sched domains in result */
+ int ndoms = 0; /* number of sched domains in result */
int nslot; /* next empty doms[] cpumask_t slot */
doms = NULL;
file = tmp->vm_file;
if (file) {
struct inode *inode = file->f_path.dentry->d_inode;
+ struct address_space *mapping = file->f_mapping;
+
get_file(file);
if (tmp->vm_flags & VM_DENYWRITE)
atomic_dec(&inode->i_writecount);
-
- /* insert tmp into the share list, just after mpnt */
- spin_lock(&file->f_mapping->i_mmap_lock);
+ spin_lock(&mapping->i_mmap_lock);
+ if (tmp->vm_flags & VM_SHARED)
+ mapping->i_mmap_writable++;
tmp->vm_truncate_count = mpnt->vm_truncate_count;
- flush_dcache_mmap_lock(file->f_mapping);
+ flush_dcache_mmap_lock(mapping);
+ /* insert tmp into the share list, just after mpnt */
vma_prio_tree_add(tmp, mpnt);
- flush_dcache_mmap_unlock(file->f_mapping);
- spin_unlock(&file->f_mapping->i_mmap_lock);
+ flush_dcache_mmap_unlock(mapping);
+ spin_unlock(&mapping->i_mmap_lock);
}
/*
init_completion(&vfork);
}
+ audit_finish_fork(p);
tracehook_report_clone(trace, regs, clone_flags, nr, p);
/*
struct irqaction *action) { }
#endif
+extern int irq_select_affinity_usr(unsigned int irq);
+
/*
* Debugging printout:
*/
int irq_set_affinity(unsigned int irq, cpumask_t cpumask)
{
struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
if (!desc->chip->set_affinity)
return -EINVAL;
+ spin_lock_irqsave(&desc->lock, flags);
+
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
- spin_unlock_irqrestore(&desc->lock, flags);
- } else
- set_pending_irq(irq, cpumask);
+ } else {
+ desc->status |= IRQ_MOVE_PENDING;
+ desc->pending_mask = cpumask;
+ }
#else
desc->affinity = cpumask;
desc->chip->set_affinity(irq, cpumask);
#endif
+ desc->status |= IRQ_AFFINITY_SET;
+ spin_unlock_irqrestore(&desc->lock, flags);
return 0;
}
/*
* Generic version of the affinity autoselector.
*/
-int irq_select_affinity(unsigned int irq)
+int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc)
{
cpumask_t mask;
- struct irq_desc *desc;
if (!irq_can_set_affinity(irq))
return 0;
cpus_and(mask, cpu_online_map, irq_default_affinity);
- desc = irq_to_desc(irq);
+ /*
+ * Preserve an userspace affinity setup, but make sure that
+ * one of the targets is online.
+ */
+ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) {
+ if (cpus_intersects(desc->affinity, cpu_online_map))
+ mask = desc->affinity;
+ else
+ desc->status &= ~IRQ_AFFINITY_SET;
+ }
+
desc->affinity = mask;
desc->chip->set_affinity(irq, mask);
return 0;
}
+#else
+static inline int do_irq_select_affinity(unsigned int irq, struct irq_desc *d)
+{
+ return irq_select_affinity(irq);
+}
#endif
+/*
+ * Called when affinity is set via /proc/irq
+ */
+int irq_select_affinity_usr(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ ret = do_irq_select_affinity(irq, desc);
+ spin_unlock_irqrestore(&desc->lock, flags);
+
+ return ret;
+}
+
+#else
+static inline int do_irq_select_affinity(int irq, struct irq_desc *desc)
+{
+ return 0;
+}
#endif
/**
* IRQF_TRIGGER_* but the PIC does not support multiple
* flow-types?
*/
- pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ pr_debug("No set_type function for IRQ %d (%s)\n", irq,
chip ? (chip->name ? : "unknown") : "unknown");
return 0;
}
/* Undo nested disables: */
desc->depth = 1;
+ /* Exclude IRQ from balancing if requested */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Set default affinity mask once everything is setup */
- irq_select_affinity(irq);
+ do_irq_select_affinity(irq, desc);
} else if ((new->flags & IRQF_TRIGGER_MASK)
&& (new->flags & IRQF_TRIGGER_MASK)
*p = new;
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
#include <linux/irq.h>
-void set_pending_irq(unsigned int irq, cpumask_t mask)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- desc->status |= IRQ_MOVE_PENDING;
- desc->pending_mask = mask;
- spin_unlock_irqrestore(&desc->lock, flags);
-}
-
void move_masked_irq(int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
if (!cpus_intersects(new_value, cpu_online_map))
/* Special case for empty set - allow the architecture
code to set default SMP affinity. */
- return irq_select_affinity(irq) ? -EINVAL : count;
+ return irq_select_affinity_usr(irq) ? -EINVAL : count;
irq_set_affinity(irq, new_value);
latency_record[i].time,
latency_record[i].max);
for (q = 0; q < LT_BACKTRACEDEPTH; q++) {
- char sym[KSYM_NAME_LEN];
+ char sym[KSYM_SYMBOL_LEN];
char *c;
if (!latency_record[i].backtrace[q])
break;
{
printk("Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar\n");
- printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
+ printk("... MAX_LOCKDEP_SUBCLASSES: %lu\n", MAX_LOCKDEP_SUBCLASSES);
printk("... MAX_LOCK_DEPTH: %lu\n", MAX_LOCK_DEPTH);
printk("... MAX_LOCKDEP_KEYS: %lu\n", MAX_LOCKDEP_KEYS);
- printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
+ printk("... CLASSHASH_SIZE: %lu\n", CLASSHASH_SIZE);
printk("... MAX_LOCKDEP_ENTRIES: %lu\n", MAX_LOCKDEP_ENTRIES);
printk("... MAX_LOCKDEP_CHAINS: %lu\n", MAX_LOCKDEP_CHAINS);
printk("... CHAINHASH_SIZE: %lu\n", CHAINHASH_SIZE);
* 'M' - System experienced a machine check exception.
* 'B' - System has hit bad_page.
* 'U' - Userspace-defined naughtiness.
+ * 'D' - Kernel has oopsed before
* 'A' - ACPI table overridden.
* 'W' - Taint on warning.
* 'C' - modules from drivers/staging are loaded.
struct task_cputime cputime;
thread_group_cputime(p, &cputime);
- switch (which_clock) {
+ switch (CPUCLOCK_WHICH(which_clock)) {
default:
return -EINVAL;
case CPUCLOCK_PROF:
return 0;
}
+static int no_timer_create(struct k_itimer *new_timer)
+{
+ return -EOPNOTSUPP;
+}
+
/*
* Return nonzero if we know a priori this clockid_t value is bogus.
*/
.clock_getres = hrtimer_get_res,
.clock_get = posix_get_monotonic_raw,
.clock_set = do_posix_clock_nosettime,
+ .timer_create = no_timer_create,
};
register_posix_clock(CLOCK_REALTIME, &clock_realtime);
return;
}
- blkdev_put(resume_bdev, mode); /* move up */
+ blkdev_put(resume_bdev, mode);
}
static int swsusp_header_init(void)
put_cpu();
}
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int __cpuinit profile_cpu_callback(struct notifier_block *info,
unsigned long action, void *__cpu)
{
int node, cpu = (unsigned long)__cpu;
#define create_hash_tables() ({ 0; })
#endif
-int create_proc_profile(void)
+int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
{
struct proc_dir_entry *entry;
return (copied == sizeof(data)) ? 0 : -EIO;
}
-#if defined CONFIG_COMPAT && defined __ARCH_WANT_COMPAT_SYS_PTRACE
+#if defined CONFIG_COMPAT
#include <linux/compat.h>
int compat_ptrace_request(struct task_struct *child, compat_long_t request,
unlock_kernel();
return ret;
}
-#endif /* CONFIG_COMPAT && __ARCH_WANT_COMPAT_SYS_PTRACE */
+#endif /* CONFIG_COMPAT */
if (ret < 0)
break;
else if (!ret) {
- if (spliced)
- break;
- if (flags & SPLICE_F_NONBLOCK) {
+ if (flags & SPLICE_F_NONBLOCK)
ret = -EAGAIN;
- break;
- }
+ break;
}
*ppos += ret;
static unsigned long cpu_avg_load_per_task(int cpu)
{
struct rq *rq = cpu_rq(cpu);
+ unsigned long nr_running = ACCESS_ONCE(rq->nr_running);
- if (rq->nr_running)
- rq->avg_load_per_task = rq->load.weight / rq->nr_running;
+ if (nr_running)
+ rq->avg_load_per_task = rq->load.weight / nr_running;
else
rq->avg_load_per_task = 0;
req = list_entry(rq->migration_queue.next,
struct migration_req, list);
list_del_init(&req->list);
+ spin_unlock_irq(&rq->lock);
complete(&req->done);
+ spin_lock_irq(&rq->lock);
}
spin_unlock_irq(&rq->lock);
break;
/*
* scd->clock = clamp(scd->tick_gtod + delta,
- * max(scd->tick_gtod, scd->clock),
- * max(scd->clock, scd->tick_gtod + TICK_NSEC));
+ * max(scd->tick_gtod, scd->clock),
+ * scd->tick_gtod + TICK_NSEC);
*/
clock = scd->tick_gtod + delta;
min_clock = wrap_max(scd->tick_gtod, scd->clock);
- max_clock = wrap_max(scd->clock, scd->tick_gtod + TICK_NSEC);
+ max_clock = scd->tick_gtod + TICK_NSEC;
clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
if ((long)(now - t->last_switch_timestamp) <
sysctl_hung_task_timeout_secs)
return;
- if (sysctl_hung_task_warnings < 0)
+ if (!sysctl_hung_task_warnings)
return;
sysctl_hung_task_warnings--;
#ifdef CONFIG_INOTIFY_USER
extern struct ctl_table inotify_table[];
#endif
+#ifdef CONFIG_EPOLL
+extern struct ctl_table epoll_table[];
+#endif
#ifdef HAVE_ARCH_PICK_MMAP_LAYOUT
int sysctl_legacy_va_layout;
.child = inotify_table,
},
#endif
+#ifdef CONFIG_EPOLL
+ {
+ .procname = "epoll",
+ .mode = 0555,
+ .child = epoll_table,
+ },
+#endif
#endif
{
.ctl_name = KERN_SETUID_DUMPABLE,
/* correct the clock when NTP error is too big */
clocksource_adjust(offset);
+ /*
+ * Since in the loop above, we accumulate any amount of time
+ * in xtime_nsec over a second into xtime.tv_sec, its possible for
+ * xtime_nsec to be fairly small after the loop. Further, if we're
+ * slightly speeding the clocksource up in clocksource_adjust(),
+ * its possible the required corrective factor to xtime_nsec could
+ * cause it to underflow.
+ *
+ * Now, we cannot simply roll the accumulated second back, since
+ * the NTP subsystem has been notified via second_overflow. So
+ * instead we push xtime_nsec forward by the amount we underflowed,
+ * and add that amount into the error.
+ *
+ * We'll correct this error next time through this function, when
+ * xtime_nsec is not as small.
+ */
+ if (unlikely((s64)clock->xtime_nsec < 0)) {
+ s64 neg = -(s64)clock->xtime_nsec;
+ clock->xtime_nsec = 0;
+ clock->error += neg << (NTP_SCALE_SHIFT - clock->shift);
+ }
+
/* store full nanoseconds into xtime after rounding it up and
* add the remainder to the error difference.
*/
out:
if (resched)
- preempt_enable_notrace();
+ preempt_enable_no_resched_notrace();
else
preempt_enable_notrace();
return NULL;
static struct trace_array *mmio_trace_array;
static bool overrun_detected;
+static unsigned long prev_overruns;
static void mmio_reset_data(struct trace_array *tr)
{
int cpu;
overrun_detected = false;
+ prev_overruns = 0;
tr->time_start = ftrace_now(tr->cpu);
for_each_online_cpu(cpu)
static unsigned long count_overruns(struct trace_iterator *iter)
{
- int cpu;
unsigned long cnt = 0;
-/* FIXME: */
-#if 0
- for_each_online_cpu(cpu) {
- cnt += iter->overrun[cpu];
- iter->overrun[cpu] = 0;
- }
-#endif
- (void)cpu;
+ unsigned long over = ring_buffer_overruns(iter->tr->buffer);
+
+ if (over > prev_overruns)
+ cnt = over - prev_overruns;
+ prev_overruns = over;
return cnt;
}
static void *
t_next(struct seq_file *m, void *v, loff_t *pos)
{
- long i = (long)m->private;
+ long i;
(*pos)++;
- i++;
+ if (v == SEQ_START_TOKEN)
+ i = 0;
+ else {
+ i = *(long *)v;
+ i++;
+ }
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
static void *t_start(struct seq_file *m, loff_t *pos)
{
- void *t = &m->private;
+ void *t = SEQ_START_TOKEN;
loff_t l = 0;
local_irq_disable();
__raw_spin_lock(&max_stack_lock);
+ if (*pos == 0)
+ return SEQ_START_TOKEN;
+
for (; t && l < *pos; t = t_next(m, t, &l))
;
static int t_show(struct seq_file *m, void *v)
{
- long i = *(long *)v;
+ long i;
int size;
- if (i < 0) {
+ if (v == SEQ_START_TOKEN) {
seq_printf(m, " Depth Size Location"
" (%d entries)\n"
" ----- ---- --------\n",
return 0;
}
+ i = *(long *)v;
+
if (i >= max_stack_trace.nr_entries ||
stack_dump_trace[i] == ULONG_MAX)
return 0;
int ret;
ret = seq_open(file, &stack_trace_seq_ops);
- if (!ret) {
- struct seq_file *m = file->private_data;
- m->private = (void *)-1;
- }
return ret;
}
nr_entries--;
out:
up(&debug_list_mutex);
- return 0;
+ return ret;
}
EXPORT_SYMBOL_GPL(unregister_dynamic_debug_module);
dynamic_enabled = DYNAMIC_ENABLED_SOME;
err = 0;
printk(KERN_DEBUG
- "debugging enabled for module %s",
+ "debugging enabled for module %s\n",
elem->name);
} else if (!value && (elem->enable == 1)) {
elem->enable = 0;
err = 0;
printk(KERN_DEBUG
"debugging disabled for module "
- "%s", elem->name);
+ "%s\n", elem->name);
}
}
}
new = get_from_free_list(idp);
if (!new)
return -1;
+ new->layer = l-1;
rcu_assign_pointer(p->ary[m], new);
p->count++;
}
if (unlikely(!p)) {
if (!(p = get_from_free_list(idp)))
return -1;
+ p->layer = 0;
layers = 1;
}
/*
*/
while ((layers < (MAX_LEVEL - 1)) && (id >= (1 << (layers*IDR_BITS)))) {
layers++;
- if (!p->count)
+ if (!p->count) {
+ /* special case: if the tree is currently empty,
+ * then we grow the tree by moving the top node
+ * upwards.
+ */
+ p->layer++;
continue;
+ }
if (!(new = get_from_free_list(idp))) {
/*
* The allocation failed. If we built part of
}
new->ary[0] = p;
new->count = 1;
+ new->layer = layers-1;
if (p->bitmap == IDR_FULL)
__set_bit(0, &new->bitmap);
p = new;
int n;
struct idr_layer *p;
- n = idp->layers * IDR_BITS;
p = rcu_dereference(idp->top);
+ if (!p)
+ return NULL;
+ n = (p->layer+1) * IDR_BITS;
/* Mask off upper bits we don't use for the search. */
id &= MAX_ID_MASK;
if (id >= (1 << n))
return NULL;
+ BUG_ON(n == 0);
while (n > 0 && p) {
n -= IDR_BITS;
+ BUG_ON(n != p->layer*IDR_BITS);
p = rcu_dereference(p->ary[(id >> n) & IDR_MASK]);
}
return((void *)p);
int n;
struct idr_layer *p, *old_p;
- n = idp->layers * IDR_BITS;
p = idp->top;
+ if (!p)
+ return ERR_PTR(-EINVAL);
+
+ n = (p->layer+1) * IDR_BITS;
id &= MAX_ID_MASK;
for_each_online_cpu(cpu) {
s32 *pcount = per_cpu_ptr(fbc->counters, cpu);
ret += *pcount;
- *pcount = 0;
}
- fbc->count = ret;
-
spin_unlock(&fbc->lock);
return ret;
}
if (!fbc->counters)
return;
- free_percpu(fbc->counters);
- fbc->counters = NULL;
#ifdef CONFIG_HOTPLUG_CPU
mutex_lock(&percpu_counters_lock);
list_del(&fbc->list);
mutex_unlock(&percpu_counters_lock);
#endif
+ free_percpu(fbc->counters);
+ fbc->counters = NULL;
}
EXPORT_SYMBOL(percpu_counter_destroy);
int ret = 0;
struct device *dev;
+ if (bdi->dev) /* The driver needs to use separate queues per device */
+ goto exit;
+
va_start(args, fmt);
dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
pgdat->node_start_pfn;
}
-static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
return 0;
}
-static int __add_section(struct zone *zone, unsigned long phys_start_pfn)
+static int __meminit __add_section(struct zone *zone, unsigned long phys_start_pfn)
{
int nr_pages = PAGES_PER_SECTION;
int ret;
* call this function after deciding the zone to which to
* add the new pages.
*/
-int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
+int __ref __add_pages(struct zone *zone, unsigned long phys_start_pfn,
unsigned long nr_pages)
{
unsigned long i;
}
-int add_memory(int nid, u64 start, u64 size)
+/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+int __ref add_memory(int nid, u64 start, u64 size)
{
pg_data_t *pgdat = NULL;
int new_pgdat = 0;
/*
* Determine the nodes of an array of pages and store it in an array of status.
*/
-static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
- const void __user * __user *pages,
- int __user *status)
+static void do_pages_stat_array(struct mm_struct *mm, unsigned long nr_pages,
+ const void __user **pages, int *status)
{
unsigned long i;
- int err;
down_read(&mm->mmap_sem);
for (i = 0; i < nr_pages; i++) {
- const void __user *p;
- unsigned long addr;
+ unsigned long addr = (unsigned long)(*pages);
struct vm_area_struct *vma;
struct page *page;
-
- err = -EFAULT;
- if (get_user(p, pages+i))
- goto out;
- addr = (unsigned long) p;
+ int err = -EFAULT;
vma = find_vma(mm, addr);
if (!vma)
err = page_to_nid(page);
set_status:
- put_user(err, status+i);
+ *status = err;
+
+ pages++;
+ status++;
+ }
+
+ up_read(&mm->mmap_sem);
+}
+
+/*
+ * Determine the nodes of a user array of pages and store it in
+ * a user array of status.
+ */
+static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
+ const void __user * __user *pages,
+ int __user *status)
+{
+#define DO_PAGES_STAT_CHUNK_NR 16
+ const void __user *chunk_pages[DO_PAGES_STAT_CHUNK_NR];
+ int chunk_status[DO_PAGES_STAT_CHUNK_NR];
+ unsigned long i, chunk_nr = DO_PAGES_STAT_CHUNK_NR;
+ int err;
+
+ for (i = 0; i < nr_pages; i += chunk_nr) {
+ if (chunk_nr + i > nr_pages)
+ chunk_nr = nr_pages - i;
+
+ err = copy_from_user(chunk_pages, &pages[i],
+ chunk_nr * sizeof(*chunk_pages));
+ if (err) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
+
+ err = copy_to_user(&status[i], chunk_status,
+ chunk_nr * sizeof(*chunk_status));
+ if (err) {
+ err = -EFAULT;
+ goto out;
+ }
}
err = 0;
out:
- up_read(&mm->mmap_sem);
return err;
}
#if !defined(CONFIG_SPARSEMEM)
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
pgdat->node_page_cgroup = NULL;
}
start_pfn = NODE_DATA(nid)->node_start_pfn;
nr_pages = NODE_DATA(nid)->node_spanned_pages;
+ if (!nr_pages)
+ return 0;
+
table_size = sizeof(struct page_cgroup) * nr_pages;
base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
return section->page_cgroup + pfn;
}
-int __meminit init_section_page_cgroup(unsigned long pfn)
+/* __alloc_bootmem...() is protected by !slab_available() */
+int __init_refok init_section_page_cgroup(unsigned long pfn)
{
struct mem_section *section;
struct page_cgroup *base, *pc;
section = __pfn_to_section(pfn);
- if (section->page_cgroup)
- return 0;
-
- nid = page_to_nid(pfn_to_page(pfn));
-
- table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
- if (slab_is_available()) {
- base = kmalloc_node(table_size, GFP_KERNEL, nid);
- if (!base)
- base = vmalloc_node(table_size, nid);
- } else {
- base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size,
+ if (!section->page_cgroup) {
+ nid = page_to_nid(pfn_to_page(pfn));
+ table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION;
+ if (slab_is_available()) {
+ base = kmalloc_node(table_size, GFP_KERNEL, nid);
+ if (!base)
+ base = vmalloc_node(table_size, nid);
+ } else {
+ base = __alloc_bootmem_node_nopanic(NODE_DATA(nid),
+ table_size,
PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
+ }
+ } else {
+ /*
+ * We don't have to allocate page_cgroup again, but
+ * address of memmap may be changed. So, we have to initialize
+ * again.
+ */
+ base = section->page_cgroup + pfn;
+ table_size = 0;
+ /* check address of memmap is changed or not. */
+ if (base->page == pfn_to_page(pfn))
+ return 0;
}
if (!base) {
}
}
-int online_page_cgroup(unsigned long start_pfn,
+int __meminit online_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages,
int nid)
{
return -ENOMEM;
}
-int offline_page_cgroup(unsigned long start_pfn,
+int __meminit offline_page_cgroup(unsigned long start_pfn,
unsigned long nr_pages, int nid)
{
unsigned long start, end, pfn;
}
-static int page_cgroup_callback(struct notifier_block *self,
+static int __meminit page_cgroup_callback(struct notifier_block *self,
unsigned long action, void *arg)
{
struct memory_notify *mn = arg;
ret = online_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
- case MEM_CANCEL_ONLINE:
case MEM_OFFLINE:
offline_page_cgroup(mn->start_pfn,
mn->nr_pages, mn->status_change_nid);
break;
+ case MEM_CANCEL_ONLINE:
case MEM_GOING_OFFLINE:
break;
case MEM_ONLINE:
case MEM_CANCEL_OFFLINE:
break;
}
- ret = notifier_from_errno(ret);
+
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
+
return ret;
}
" want\n");
}
-void __init pgdat_page_cgroup_init(struct pglist_data *pgdat)
+void __meminit pgdat_page_cgroup_init(struct pglist_data *pgdat)
{
return;
}
struct kmem_cache *c;
c = slob_alloc(sizeof(struct kmem_cache),
- flags, ARCH_KMALLOC_MINALIGN, -1);
+ GFP_KERNEL, ARCH_KMALLOC_MINALIGN, -1);
if (c) {
c->name = name;
case MEM_CANCEL_OFFLINE:
break;
}
-
- ret = notifier_from_errno(ret);
+ if (ret)
+ ret = notifier_from_errno(ret);
+ else
+ ret = NOTIFY_OK;
return ret;
}
for (i = 0; i < t.count; i++) {
struct location *l = &t.loc[i];
- if (len > PAGE_SIZE - 100)
+ if (len > PAGE_SIZE - KSYM_SYMBOL_LEN - 100)
break;
len += sprintf(buf + len, "%7ld ", l->count);
* set. If this is <=0, then that means that the passed-in
* map was not consumed and must be freed.
*/
-int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
+int __meminit sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
int nr_pages)
{
unsigned long section_nr = pfn_to_section_nr(start_pfn);
put_cpu();
}
-#if defined(CONFIG_NUMA) || defined(CONFIG_UNEVICTABLE_LRU)
static void lru_add_drain_per_cpu(struct work_struct *dummy)
{
lru_add_drain();
return schedule_on_each_cpu(lru_add_drain_per_cpu);
}
-#else
-
-/*
- * Returns 0 for success
- */
-int lru_add_drain_all(void)
-{
- lru_add_drain();
- return 0;
-}
-#endif
-
/*
* Batched page_cache_release(). Decrement the reference count on all the
* passed pages. If it fell to zero then remove the page from the LRU and
for (i = 0; i < pagevec_count(pvec); i++) {
struct page *page = pvec->pages[i];
struct zone *pagezone = page_zone(page);
+ int file;
if (pagezone != zone) {
if (zone)
VM_BUG_ON(PageUnevictable(page));
VM_BUG_ON(PageLRU(page));
SetPageLRU(page);
- if (is_active_lru(lru))
+ file = is_file_lru(lru);
+ zone->recent_scanned[file]++;
+ if (is_active_lru(lru)) {
SetPageActive(page);
+ zone->recent_rotated[file]++;
+ }
add_page_to_lru_list(zone, page, lru);
}
if (zone)
BUG_ON(addr >= end);
pgd = pgd_offset_k(addr);
- flush_cache_vunmap(addr, end);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
}
/*
- * Free and unmap a vmap area
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
*/
-static void free_unmap_vmap_area(struct vmap_area *va)
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
try_purge_vmap_area_lazy();
}
+/*
+ * Free and unmap a vmap area
+ */
+static void free_unmap_vmap_area(struct vmap_area *va)
+{
+ flush_cache_vunmap(va->va_start, va->va_end);
+ free_unmap_vmap_area_noflush(va);
+}
+
static struct vmap_area *find_vmap_area(unsigned long addr)
{
struct vmap_area *va;
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area(vb->va);
+ free_unmap_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
BUG_ON(size & ~PAGE_MASK);
BUG_ON(size > PAGE_SIZE*VMAP_MAX_ALLOC);
+
+ flush_cache_vunmap((unsigned long)addr, (unsigned long)addr + size);
+
order = get_order(size);
offset = (unsigned long)addr & (VMAP_BLOCK_SIZE - 1);
v->addr, v->addr + v->size, v->size);
if (v->caller) {
- char buff[2 * KSYM_NAME_LEN];
+ char buff[KSYM_SYMBOL_LEN];
seq_putc(m, ' ');
sprint_symbol(buff, (unsigned long)v->caller);
list_add(&page->lru, &l_inactive);
}
+ spin_lock_irq(&zone->lru_lock);
/*
* Count referenced pages from currently used mappings as
* rotated, even though they are moved to the inactive list.
pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
- spin_lock_irq(&zone->lru_lock);
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
error = -EINVAL;
goto out;
}
- vcc_insert_socket(sk);
+ if (test_bit(ATM_VF_LISTEN, &vcc->flags)) {
+ error = -EADDRINUSE;
+ goto out;
+ }
set_bit(ATM_VF_WAITING, &vcc->flags);
prepare_to_wait(sk->sk_sleep, &wait, TASK_UNINTERRUPTIBLE);
sigd_enq(vcc,as_listen,NULL,NULL,&vcc->local);
goto out;
}
set_bit(ATM_VF_LISTEN,&vcc->flags);
+ vcc_insert_socket(sk);
sk->sk_max_ack_backlog = backlog > 0 ? backlog : ATM_BACKLOG_DEFAULT;
error = -sk->sk_err;
out:
if (err < 0)
return;
- __module_get(nsock->ops->owner);
-
/* Set our callbacks */
nsock->sk->sk_data_ready = rfcomm_l2data_ready;
nsock->sk->sk_state_change = rfcomm_l2state_change;
pppoe_proto(skb) == htons(PPP_IPV6) && \
brnf_filter_pppoe_tagged)
+static void fake_update_pmtu(struct dst_entry *dst, u32 mtu)
+{
+}
+
+static struct dst_ops fake_dst_ops = {
+ .family = AF_INET,
+ .protocol = __constant_htons(ETH_P_IP),
+ .update_pmtu = fake_update_pmtu,
+ .entry_size = sizeof(struct rtable),
+ .entries = ATOMIC_INIT(0),
+};
+
/*
* Initialize bogus route table used to keep netfilter happy.
* Currently, we fill in the PMTU entry because netfilter
rt->u.dst.path = &rt->u.dst;
rt->u.dst.metrics[RTAX_MTU - 1] = 1500;
rt->u.dst.flags = DST_NOXFRM;
+ rt->u.dst.ops = &fake_dst_ops;
}
static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
return n ? d : NULL;
}
+/**
+ * find_rcv_list - determine optimal filterlist inside device filter struct
+ * @can_id: pointer to CAN identifier of a given can_filter
+ * @mask: pointer to CAN mask of a given can_filter
+ * @d: pointer to the device filter struct
+ *
+ * Description:
+ * Returns the optimal filterlist to reduce the filter handling in the
+ * receive path. This function is called by service functions that need
+ * to register or unregister a can_filter in the filter lists.
+ *
+ * A filter matches in general, when
+ *
+ * <received_can_id> & mask == can_id & mask
+ *
+ * so every bit set in the mask (even CAN_EFF_FLAG, CAN_RTR_FLAG) describe
+ * relevant bits for the filter.
+ *
+ * The filter can be inverted (CAN_INV_FILTER bit set in can_id) or it can
+ * filter for error frames (CAN_ERR_FLAG bit set in mask). For error frames
+ * there is a special filterlist and a special rx path filter handling.
+ *
+ * Return:
+ * Pointer to optimal filterlist for the given can_id/mask pair.
+ * Constistency checked mask.
+ * Reduced can_id to have a preprocessed filter compare value.
+ */
static struct hlist_head *find_rcv_list(canid_t *can_id, canid_t *mask,
struct dev_rcv_lists *d)
{
canid_t inv = *can_id & CAN_INV_FILTER; /* save flag before masking */
- /* filter error frames */
+ /* filter for error frames in extra filterlist */
if (*mask & CAN_ERR_FLAG) {
- /* clear CAN_ERR_FLAG in list entry */
+ /* clear CAN_ERR_FLAG in filter entry */
*mask &= CAN_ERR_MASK;
return &d->rx[RX_ERR];
}
- /* ensure valid values in can_mask */
- if (*mask & CAN_EFF_FLAG)
- *mask &= (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG);
- else
- *mask &= (CAN_SFF_MASK | CAN_RTR_FLAG);
+ /* with cleared CAN_ERR_FLAG we have a simple mask/value filterpair */
+
+#define CAN_EFF_RTR_FLAGS (CAN_EFF_FLAG | CAN_RTR_FLAG)
+
+ /* ensure valid values in can_mask for 'SFF only' frame filtering */
+ if ((*mask & CAN_EFF_FLAG) && !(*can_id & CAN_EFF_FLAG))
+ *mask &= (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS);
/* reduce condition testing at receive time */
*can_id &= *mask;
if (!(*mask))
return &d->rx[RX_ALL];
- /* use extra filterset for the subscription of exactly *ONE* can_id */
- if (*can_id & CAN_EFF_FLAG) {
- if (*mask == (CAN_EFF_MASK | CAN_EFF_FLAG)) {
- /* RFC: a use-case for hash-tables in the future? */
- return &d->rx[RX_EFF];
+ /* extra filterlists for the subscription of a single non-RTR can_id */
+ if (((*mask & CAN_EFF_RTR_FLAGS) == CAN_EFF_RTR_FLAGS)
+ && !(*can_id & CAN_RTR_FLAG)) {
+
+ if (*can_id & CAN_EFF_FLAG) {
+ if (*mask == (CAN_EFF_MASK | CAN_EFF_RTR_FLAGS)) {
+ /* RFC: a future use-case for hash-tables? */
+ return &d->rx[RX_EFF];
+ }
+ } else {
+ if (*mask == (CAN_SFF_MASK | CAN_EFF_RTR_FLAGS))
+ return &d->rx_sff[*can_id];
}
- } else {
- if (*mask == CAN_SFF_MASK)
- return &d->rx_sff[*can_id];
}
/* default: filter via can_id/can_mask */
}
}
- /* check CAN_ID specific entries */
+ /* check filterlists for single non-RTR can_ids */
+ if (can_id & CAN_RTR_FLAG)
+ return matches;
+
if (can_id & CAN_EFF_FLAG) {
hlist_for_each_entry_rcu(r, n, &d->rx[RX_EFF], list) {
if (r->can_id == can_id) {
#define BCM_CAN_DLC_MASK 0x0F /* clean private flags in can_dlc by masking */
/* get best masking value for can_rx_register() for a given single can_id */
-#define REGMASK(id) ((id & CAN_RTR_FLAG) | ((id & CAN_EFF_FLAG) ? \
- (CAN_EFF_MASK | CAN_EFF_FLAG) : CAN_SFF_MASK))
+#define REGMASK(id) ((id & CAN_EFF_FLAG) ? \
+ (CAN_EFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG) : \
+ (CAN_SFF_MASK | CAN_EFF_FLAG | CAN_RTR_FLAG))
-#define CAN_BCM_VERSION "20080415"
+#define CAN_BCM_VERSION CAN_VERSION
static __initdata const char banner[] = KERN_INFO
"can: broadcast manager protocol (rev " CAN_BCM_VERSION ")\n";
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
+ set_bit(NAPI_STATE_NPSVC, &napi->state);
work = napi->poll(napi, budget);
+ clear_bit(NAPI_STATE_NPSVC, &napi->state);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
void skb_truesize_bug(struct sk_buff *skb)
{
- printk(KERN_ERR "SKB BUG: Invalid truesize (%u) "
+ WARN(net_ratelimit(), KERN_ERR "SKB BUG: Invalid truesize (%u) "
"len=%u, sizeof(sk_buff)=%Zd\n",
skb->truesize, skb->len, sizeof(struct sk_buff));
}
int proto_register(struct proto *prot, int alloc_slab)
{
- char *request_sock_slab_name = NULL;
- char *timewait_sock_slab_name;
-
if (alloc_slab) {
prot->slab = kmem_cache_create(prot->name, prot->obj_size, 0,
SLAB_HWCACHE_ALIGN, NULL);
if (prot->rsk_prot != NULL) {
static const char mask[] = "request_sock_%s";
- request_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
- if (request_sock_slab_name == NULL)
+ prot->rsk_prot->slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
+ if (prot->rsk_prot->slab_name == NULL)
goto out_free_sock_slab;
- sprintf(request_sock_slab_name, mask, prot->name);
- prot->rsk_prot->slab = kmem_cache_create(request_sock_slab_name,
+ sprintf(prot->rsk_prot->slab_name, mask, prot->name);
+ prot->rsk_prot->slab = kmem_cache_create(prot->rsk_prot->slab_name,
prot->rsk_prot->obj_size, 0,
SLAB_HWCACHE_ALIGN, NULL);
if (prot->twsk_prot != NULL) {
static const char mask[] = "tw_sock_%s";
- timewait_sock_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
+ prot->twsk_prot->twsk_slab_name = kmalloc(strlen(prot->name) + sizeof(mask) - 1, GFP_KERNEL);
- if (timewait_sock_slab_name == NULL)
+ if (prot->twsk_prot->twsk_slab_name == NULL)
goto out_free_request_sock_slab;
- sprintf(timewait_sock_slab_name, mask, prot->name);
+ sprintf(prot->twsk_prot->twsk_slab_name, mask, prot->name);
prot->twsk_prot->twsk_slab =
- kmem_cache_create(timewait_sock_slab_name,
+ kmem_cache_create(prot->twsk_prot->twsk_slab_name,
prot->twsk_prot->twsk_obj_size,
0, SLAB_HWCACHE_ALIGN,
NULL);
return 0;
out_free_timewait_sock_slab_name:
- kfree(timewait_sock_slab_name);
+ kfree(prot->twsk_prot->twsk_slab_name);
out_free_request_sock_slab:
if (prot->rsk_prot && prot->rsk_prot->slab) {
kmem_cache_destroy(prot->rsk_prot->slab);
prot->rsk_prot->slab = NULL;
}
out_free_request_sock_slab_name:
- kfree(request_sock_slab_name);
+ kfree(prot->rsk_prot->slab_name);
out_free_sock_slab:
kmem_cache_destroy(prot->slab);
prot->slab = NULL;
}
if (prot->rsk_prot != NULL && prot->rsk_prot->slab != NULL) {
- const char *name = kmem_cache_name(prot->rsk_prot->slab);
-
kmem_cache_destroy(prot->rsk_prot->slab);
- kfree(name);
+ kfree(prot->rsk_prot->slab_name);
prot->rsk_prot->slab = NULL;
}
if (prot->twsk_prot != NULL && prot->twsk_prot->twsk_slab != NULL) {
- const char *name = kmem_cache_name(prot->twsk_prot->twsk_slab);
-
kmem_cache_destroy(prot->twsk_prot->twsk_slab);
- kfree(name);
+ kfree(prot->twsk_prot->twsk_slab_name);
prot->twsk_prot->twsk_slab = NULL;
}
}
static struct xt_table nat_table = {
.name = "nat",
.valid_hooks = NAT_VALID_HOOKS,
- .lock = __RW_LOCK_UNLOCKED(__nat_table.lock),
+ .lock = __RW_LOCK_UNLOCKED(nat_table.lock),
.me = THIS_MODULE,
.af = AF_INET,
};
/* Compute the current effective MSS, taking SACKs and IP options,
* and even PMTU discovery events into account.
- *
- * LARGESEND note: !tcp_urg_mode is overkill, only frames up to snd_up
- * cannot be large. However, taking into account rare use of URG, this
- * is not a big flaw.
*/
unsigned int tcp_current_mss(struct sock *sk, int large_allowed)
{
mss_now = tp->mss_cache;
- if (large_allowed && sk_can_gso(sk) && !tcp_urg_mode(tp))
+ if (large_allowed && sk_can_gso(sk))
doing_tso = 1;
if (dst) {
* send_head. This happens as incoming acks open up the remote
* window for us.
*
+ * LARGESEND note: !tcp_urg_mode is overkill, only frames between
+ * snd_up-64k-mss .. snd_up cannot be large. However, taking into
+ * account rare use of URG, this is not a big flaw.
+ *
* Returns 1, if no segments are in flight and we have queued segments, but
* cannot send anything now because of SWS or another problem.
*/
}
limit = mss_now;
- if (tso_segs > 1)
+ if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(sk, skb, mss_now,
cwnd_quota);
*/
void tcp_push_one(struct sock *sk, unsigned int mss_now)
{
+ struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb = tcp_send_head(sk);
unsigned int tso_segs, cwnd_quota;
BUG_ON(!tso_segs);
limit = mss_now;
- if (tso_segs > 1)
+ if (tso_segs > 1 && !tcp_urg_mode(tp))
limit = tcp_mss_split_point(sk, skb, mss_now,
cwnd_quota);
#include "tcp_vegas.h"
-/* Default values of the Vegas variables, in fixed-point representation
- * with V_PARAM_SHIFT bits to the right of the binary point.
- */
-#define V_PARAM_SHIFT 1
-static int alpha = 2<<V_PARAM_SHIFT;
-static int beta = 4<<V_PARAM_SHIFT;
-static int gamma = 1<<V_PARAM_SHIFT;
+static int alpha = 2;
+static int beta = 4;
+static int gamma = 1;
module_param(alpha, int, 0644);
-MODULE_PARM_DESC(alpha, "lower bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(alpha, "lower bound of packets in network");
module_param(beta, int, 0644);
-MODULE_PARM_DESC(beta, "upper bound of packets in network (scale by 2)");
+MODULE_PARM_DESC(beta, "upper bound of packets in network");
module_param(gamma, int, 0644);
MODULE_PARM_DESC(gamma, "limit on increase (scale by 2)");
return;
}
- /* The key players are v_beg_snd_una and v_beg_snd_nxt.
- *
- * These are so named because they represent the approximate values
- * of snd_una and snd_nxt at the beginning of the current RTT. More
- * precisely, they represent the amount of data sent during the RTT.
- * At the end of the RTT, when we receive an ACK for v_beg_snd_nxt,
- * we will calculate that (v_beg_snd_nxt - v_beg_snd_una) outstanding
- * bytes of data have been ACKed during the course of the RTT, giving
- * an "actual" rate of:
- *
- * (v_beg_snd_nxt - v_beg_snd_una) / (rtt duration)
- *
- * Unfortunately, v_beg_snd_una is not exactly equal to snd_una,
- * because delayed ACKs can cover more than one segment, so they
- * don't line up nicely with the boundaries of RTTs.
- *
- * Another unfortunate fact of life is that delayed ACKs delay the
- * advance of the left edge of our send window, so that the number
- * of bytes we send in an RTT is often less than our cwnd will allow.
- * So we keep track of our cwnd separately, in v_beg_snd_cwnd.
- */
-
if (after(ack, vegas->beg_snd_nxt)) {
/* Do the Vegas once-per-RTT cwnd adjustment. */
- u32 old_wnd, old_snd_cwnd;
-
-
- /* Here old_wnd is essentially the window of data that was
- * sent during the previous RTT, and has all
- * been acknowledged in the course of the RTT that ended
- * with the ACK we just received. Likewise, old_snd_cwnd
- * is the cwnd during the previous RTT.
- */
- old_wnd = (vegas->beg_snd_nxt - vegas->beg_snd_una) /
- tp->mss_cache;
- old_snd_cwnd = vegas->beg_snd_cwnd;
/* Save the extent of the current window so we can use this
* at the end of the next RTT.
*/
- vegas->beg_snd_una = vegas->beg_snd_nxt;
vegas->beg_snd_nxt = tp->snd_nxt;
- vegas->beg_snd_cwnd = tp->snd_cwnd;
/* We do the Vegas calculations only if we got enough RTT
* samples that we can be reasonably sure that we got
*
* This is:
* (actual rate in segments) * baseRTT
- * We keep it as a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary point.
*/
- target_cwnd = ((u64)old_wnd * vegas->baseRTT);
- target_cwnd <<= V_PARAM_SHIFT;
- do_div(target_cwnd, rtt);
+ target_cwnd = tp->snd_cwnd * vegas->baseRTT / rtt;
/* Calculate the difference between the window we had,
* and the window we would like to have. This quantity
* is the "Diff" from the Arizona Vegas papers.
- *
- * Again, this is a fixed point number with
- * V_PARAM_SHIFT bits to the right of the binary
- * point.
*/
- diff = (old_wnd << V_PARAM_SHIFT) - target_cwnd;
+ diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
if (diff > gamma && tp->snd_ssthresh > 2 ) {
/* Going too fast. Time to slow down
* truncation robs us of full link
* utilization.
*/
- tp->snd_cwnd = min(tp->snd_cwnd,
- ((u32)target_cwnd >>
- V_PARAM_SHIFT)+1);
+ tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
tcp_slow_start(tp);
} else {
/* Congestion avoidance. */
- u32 next_snd_cwnd;
/* Figure out where we would like cwnd
* to be.
/* The old window was too fast, so
* we slow down.
*/
- next_snd_cwnd = old_snd_cwnd - 1;
+ tp->snd_cwnd--;
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
*/
- next_snd_cwnd = old_snd_cwnd + 1;
+ tp->snd_cwnd++;
} else {
/* Sending just as fast as we
* should be.
*/
- next_snd_cwnd = old_snd_cwnd;
}
-
- /* Adjust cwnd upward or downward, toward the
- * desired value.
- */
- if (next_snd_cwnd > tp->snd_cwnd)
- tp->snd_cwnd++;
- else if (next_snd_cwnd < tp->snd_cwnd)
- tp->snd_cwnd--;
}
if (tp->snd_cwnd < 2)
tp->snd_cwnd = 2;
else if (tp->snd_cwnd > tp->snd_cwnd_clamp)
tp->snd_cwnd = tp->snd_cwnd_clamp;
+
+ tp->snd_ssthresh = tcp_current_ssthresh(sk);
}
/* Wipe the slate clean for the next RTT. */
is invalid, but ndisc specs say nothing
about it. It could be misconfiguration, or
an smart proxy agent tries to help us :-)
+
+ We should not print the error if NA has been
+ received from loopback - it is just our own
+ unsolicited advertisement.
*/
- ND_PRINTK1(KERN_WARNING
+ if (skb->pkt_type != PACKET_LOOPBACK)
+ ND_PRINTK1(KERN_WARNING
"ICMPv6 NA: someone advertises our address on %s!\n",
ifp->idev->dev->name);
in6_ifa_put(ifp);
sta = rcu_dereference(local->sta_hash[STA_HASH(addr)]);
while (sta) {
- if (compare_ether_addr(sta->sta.addr, addr) == 0)
+ if (memcmp(sta->sta.addr, addr, ETH_ALEN) == 0)
break;
sta = rcu_dereference(sta->hnext);
}
__u32 *mode, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
int type;
if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
type = NL80211_IFTYPE_STATION;
break;
case IW_MODE_ADHOC:
+ /* Setting ad-hoc mode on non ibss channel is not
+ * supported.
+ */
+ if (local->oper_channel &&
+ (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS))
+ return -EOPNOTSUPP;
+
type = NL80211_IFTYPE_ADHOC;
break;
case IW_MODE_REPEAT:
hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
repl_hash = hash_conntrack(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
- spin_lock_bh(&nf_conntrack_lock);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
- spin_unlock_bh(&nf_conntrack_lock);
}
EXPORT_SYMBOL_GPL(nf_conntrack_hash_insert);
struct nf_conn_help *help;
struct nf_conntrack_helper *helper;
- ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_KERNEL);
+ ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC);
if (ct == NULL || IS_ERR(ct))
return -ENOMEM;
}
}
- nf_ct_acct_ext_add(ct, GFP_KERNEL);
+ nf_ct_acct_ext_add(ct, GFP_ATOMIC);
#if defined(CONFIG_NF_CONNTRACK_MARK)
if (cda[CTA_MARK])
atomic_inc(&master_ct->ct_general.use);
}
- spin_unlock_bh(&nf_conntrack_lock);
err = -ENOENT;
if (nlh->nlmsg_flags & NLM_F_CREATE)
err = ctnetlink_create_conntrack(cda,
&otuple,
&rtuple,
master_ct);
+ spin_unlock_bh(&nf_conntrack_lock);
+
if (err < 0 && master_ct)
nf_ct_put(master_ct);
sk = nf_tproxy_get_sock_v4(dev_net(skb->dev), protocol,
saddr, daddr, sport, dport, par->in, false);
if (sk != NULL) {
- bool wildcard = (inet_sk(sk)->rcv_saddr == 0);
+ bool wildcard = (sk->sk_state != TCP_TIME_WAIT && inet_sk(sk)->rcv_saddr == 0);
nf_tproxy_put_sock(sk);
if (wildcard)
const struct in_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af4list *list_entry;
struct netlbl_unlhsh_addr4 *entry;
struct audit_buffer *audit_buf;
list_entry = netlbl_af4list_remove(addr->s_addr, mask->s_addr,
&iface->addr4_list);
spin_unlock(&netlbl_unlhsh_lock);
- if (list_entry == NULL)
- ret_val = -ENOENT;
- entry = netlbl_unlhsh_addr4_entry(list_entry);
+ if (list_entry != NULL)
+ entry = netlbl_unlhsh_addr4_entry(list_entry);
+ else
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
addr->s_addr, mask->s_addr);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr4);
+ return 0;
}
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
const struct in6_addr *mask,
struct netlbl_audit *audit_info)
{
- int ret_val = 0;
struct netlbl_af6list *list_entry;
struct netlbl_unlhsh_addr6 *entry;
struct audit_buffer *audit_buf;
spin_lock(&netlbl_unlhsh_lock);
list_entry = netlbl_af6list_remove(addr, mask, &iface->addr6_list);
spin_unlock(&netlbl_unlhsh_lock);
- if (list_entry == NULL)
- ret_val = -ENOENT;
- entry = netlbl_unlhsh_addr6_entry(list_entry);
+ if (list_entry != NULL)
+ entry = netlbl_unlhsh_addr6_entry(list_entry);
+ else
+ entry = NULL;
audit_buf = netlbl_audit_start_common(AUDIT_MAC_UNLBL_STCDEL,
audit_info);
addr, mask);
if (dev != NULL)
dev_put(dev);
- if (entry && security_secid_to_secctx(entry->secid,
- &secctx,
- &secctx_len) == 0) {
+ if (entry != NULL &&
+ security_secid_to_secctx(entry->secid,
+ &secctx, &secctx_len) == 0) {
audit_log_format(audit_buf, " sec_obj=%s", secctx);
security_release_secctx(secctx, secctx_len);
}
- audit_log_format(audit_buf, " res=%u", ret_val == 0 ? 1 : 0);
+ audit_log_format(audit_buf, " res=%u", entry != NULL ? 1 : 0);
audit_log_end(audit_buf);
}
- if (ret_val == 0)
- call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
- return ret_val;
+ if (entry == NULL)
+ return -ENOENT;
+
+ call_rcu(&entry->rcu, netlbl_unlhsh_free_addr6);
+ return 0;
}
#endif /* IPv6 */
static void gprs_write_space(struct sock *sk)
{
struct gprs_dev *dev = sk->sk_user_data;
+ struct net_device *net = dev->net;
unsigned credits = pep_writeable(sk);
spin_lock_bh(&dev->tx_lock);
dev->tx_max = credits;
- if (credits > skb_queue_len(&dev->tx_queue))
- netif_wake_queue(dev->net);
+ if (credits > skb_queue_len(&dev->tx_queue) && netif_running(net))
+ netif_wake_queue(net);
spin_unlock_bh(&dev->tx_lock);
}
* Network device callbacks
*/
+static int gprs_open(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ gprs_write_space(gp->sk);
+ return 0;
+}
+
+static int gprs_close(struct net_device *dev)
+{
+ struct gprs_dev *gp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ flush_work(&gp->tx_work);
+ return 0;
+}
+
static int gprs_xmit(struct sk_buff *skb, struct net_device *net)
{
struct gprs_dev *dev = netdev_priv(net);
net->tx_queue_len = 10;
net->destructor = free_netdev;
+ net->open = gprs_open;
+ net->stop = gprs_close;
net->hard_start_xmit = gprs_xmit; /* mandatory */
net->change_mtu = gprs_set_mtu;
net->get_stats = gprs_get_stats;
dev->sk = sk;
printk(KERN_DEBUG"%s: attached\n", net->name);
- gprs_write_space(sk); /* kick off TX */
return net->ifindex;
out_rel:
printk(KERN_DEBUG"%s: detached\n", net->name);
unregister_netdev(net);
- flush_scheduled_work();
sock_put(sk);
- skb_queue_purge(&dev->tx_queue);
}
pnd = __phonet_get(dev);
if (!pnd || !test_and_clear_bit(addr >> 2, pnd->addrs))
err = -EADDRNOTAVAIL;
- if (bitmap_empty(pnd->addrs, 64))
+ else if (bitmap_empty(pnd->addrs, 64))
__phonet_device_free(pnd);
spin_unlock_bh(&pndevs.lock);
return err;
static int getaddr_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
{
+ struct net *net = sock_net(skb->sk);
struct phonet_device *pnd;
int dev_idx = 0, dev_start_idx = cb->args[0];
int addr_idx = 0, addr_start_idx = cb->args[1];
list_for_each_entry(pnd, &pndevs.list, list) {
u8 addr;
+ if (!net_eq(dev_net(pnd->netdev), net))
+ continue;
if (dev_idx > dev_start_idx)
addr_start_idx = 0;
if (dev_idx++ < dev_start_idx)
unsigned char *asmptr;
int n, size, qbit = 0;
+ /* ROSE empty frame has no meaning : don't send */
+ if (len == 0)
+ return 0;
+
if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_EOR|MSG_CMSG_COMPAT))
return -EINVAL;
skb_reset_transport_header(skb);
copied = skb->len;
+ /* ROSE empty frame has no meaning : ignore it */
+ if (copied == 0) {
+ skb_free_datagram(sk, skb);
+ return copied;
+ }
+
if (copied > size) {
copied = size;
msg->msg_flags |= MSG_TRUNC;
layering other disciplines. It does not need to do bandwidth
control either since that can be handled by using token
bucket or other rate control.
-
- The simulator is limited by the Linux timer resolution
- and will create packet bursts on the HZ boundary (1ms).
*/
struct netem_sched_data {
}
(*newsock)->ops = sock->ops;
+ __module_get((*newsock)->ops->owner);
done:
return err;
else if (so->state > SS_UNCONNECTED)
err = -EISCONN;
else {
- svsk = svc_setup_socket(serv, so, &err, SVC_SOCK_DEFAULTS);
+ if (!try_module_get(THIS_MODULE))
+ err = -ENOENT;
+ else
+ svsk = svc_setup_socket(serv, so, &err,
+ SVC_SOCK_DEFAULTS);
if (svsk) {
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *)&addr;
spin_unlock_bh(&serv->sv_lock);
svc_xprt_received(&svsk->sk_xprt);
err = 0;
- }
+ } else
+ module_put(THIS_MODULE);
}
if (err) {
sockfd_put(so);
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
+ wait_for_unix_gc();
err = scm_send(sock, msg, siocb->scm);
if (err < 0)
return err;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
+ wait_for_unix_gc();
err = scm_send(sock, msg, siocb->scm);
if (err < 0)
return err;
#include <linux/file.h>
#include <linux/proc_fs.h>
#include <linux/mutex.h>
+#include <linux/wait.h>
#include <net/sock.h>
#include <net/af_unix.h>
static LIST_HEAD(gc_inflight_list);
static LIST_HEAD(gc_candidates);
static DEFINE_SPINLOCK(unix_gc_lock);
+static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait);
unsigned int unix_tot_inflight;
list_move_tail(&u->link, &gc_candidates);
}
-/* The external entry point: unix_gc() */
+static bool gc_in_progress = false;
-void unix_gc(void)
+void wait_for_unix_gc(void)
{
- static bool gc_in_progress = false;
+ wait_event(unix_gc_wait, gc_in_progress == false);
+}
+/* The external entry point: unix_gc() */
+void unix_gc(void)
+{
struct unix_sock *u;
struct unix_sock *next;
struct sk_buff_head hitlist;
/* All candidates should have been detached by now. */
BUG_ON(!list_empty(&gc_candidates));
gc_in_progress = false;
+ wake_up(&unix_gc_wait);
out:
spin_unlock(&unix_gc_lock);
return 0;
return -EALREADY;
}
- if (WARN_ON(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2)),
+ if (WARN(!is_alpha2_set(alpha2) || !is_an_alpha2(alpha2),
"Invalid Country IE regulatory hint passed "
- "to the wireless core\n")
+ "to the wireless core\n"))
return -EINVAL;
/* We ignore Country IE hints for now, as we haven't yet
* added the dot11MultiDomainCapabilityEnabled flag
continue;
hlist_del(&pol->bydst);
hlist_del(&pol->byidx);
+ list_del(&pol->walk.all);
write_unlock_bh(&xfrm_policy_lock);
xfrm_audit_policy_delete(pol, 1, audit_info->loginuid,
# print STDERR "parameter def '$1' = '$contents'\n";
$name = $1;
$parameterdescs{$name} = $contents;
+ } elsif ($name eq "@\.\.\.") {
+# print STDERR "parameter def '...' = '$contents'\n";
+ $name = "...";
+ $parameterdescs{$name} = $contents;
} else {
# print STDERR "other section '$name' = '$contents'\n";
if (defined($sections{$name}) && ($sections{$name} ne "")) {
if ($type eq "" && $param =~ /\.\.\.$/)
{
- $type="";
- $parameterdescs{$param} = "variable arguments";
+ if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
+ $parameterdescs{$param} = "variable arguments";
+ }
}
elsif ($type eq "" && ($param eq "" or $param eq "void"))
{
- $type="";
$param="void";
$parameterdescs{void} = "no arguments";
}
#include <linux/init.h>
#include <linux/device.h>
#include <linux/string.h>
+#include <sound/ac97_codec.h>
/*
* Let drivers decide whether they want to support given codec from their
+snd-aoa-codec-onyx-objs := onyx.o
+snd-aoa-codec-tas-objs := tas.o
+snd-aoa-codec-toonie-objs := toonie.o
+
obj-$(CONFIG_SND_AOA_ONYX) += snd-aoa-codec-onyx.o
obj-$(CONFIG_SND_AOA_TAS) += snd-aoa-codec-tas.o
obj-$(CONFIG_SND_AOA_TOONIE) += snd-aoa-codec-toonie.o
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa");
-#include "snd-aoa-codec-onyx.h"
+#include "onyx.h"
#include "../aoa.h"
#include "../soundbus/soundbus.h"
static struct snd_kcontrol_new capture_source_control = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
/* If we name this 'Input Source', it properly shows up in
- * alsamixer as a selection, * but it's shown under the
+ * alsamixer as a selection, * but it's shown under the
* 'Playback' category.
* If I name it 'Capture Source', it shows up in strange
* ways (two bools of which one can be selected at a
ucontrol->value.iec958.status[3] = 0x3f;
ucontrol->value.iec958.status[4] = 0x0f;
-
+
return 0;
}
onyx_read_register(onyx, ONYX_REG_DIG_INFO4, &v);
spdif_enabled = !!(v & ONYX_SPDIF_ENABLE);
onyx_read_register(onyx, ONYX_REG_DAC_CONTROL, &v);
- analog_enabled =
+ analog_enabled =
(v & (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT))
!= (ONYX_MUTE_RIGHT|ONYX_MUTE_LEFT);
mutex_unlock(&onyx->mutex);
msleep(1);
onyx->codec.gpio->methods->set_hw_reset(onyx->codec.gpio, 0);
msleep(1);
-
+
if (onyx_register_init(onyx)) {
printk(KERN_ERR PFX "failed to initialise onyx registers\n");
return -ENODEV;
/* if that didn't work, try desperate mode for older
* machines that have stuff missing from the device tree */
-
+
if (!of_device_is_compatible(busnode, "k2-i2c"))
return -ENODEV;
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("tas codec driver for snd-aoa");
-#include "snd-aoa-codec-tas.h"
-#include "snd-aoa-codec-tas-gain-table.h"
-#include "snd-aoa-codec-tas-basstreble.h"
+#include "tas.h"
+#include "tas-gain-table.h"
+#include "tas-basstreble.h"
#include "../aoa.h"
#include "../soundbus/soundbus.h"
return;
tas->codec.soundbus_dev->detach_codec(tas->codec.soundbus_dev, tas);
}
-
+
static struct i2c_driver tas_driver;
toonie->codec.owner = THIS_MODULE;
toonie->codec.init = toonie_init_codec;
toonie->codec.exit = toonie_exit_codec;
-
+
if (aoa_codec_register(&toonie->codec)) {
kfree(toonie);
return -EINVAL;
obj-$(CONFIG_SND_AOA) += snd-aoa.o
-snd-aoa-objs := snd-aoa-core.o \
- snd-aoa-alsa.o \
- snd-aoa-gpio-pmf.o \
- snd-aoa-gpio-feature.o
+snd-aoa-objs := core.o \
+ alsa.o \
+ gpio-pmf.o \
+ gpio-feature.o
* GPL v2, can be found in COPYING.
*/
#include <linux/module.h>
-#include "snd-aoa-alsa.h"
+#include "alsa.h"
static int index = -1;
module_param(index, int, 0444);
{
struct snd_card *card = aoa_get_card();
int err;
-
+
if (!card) return -ENOMEM;
err = snd_device_new(card, type, device_data, ops);
#include <linux/module.h>
#include <linux/list.h>
#include "../aoa.h"
-#include "snd-aoa-alsa.h"
+#include "alsa.h"
MODULE_DESCRIPTION("Apple Onboard Audio Sound Driver");
MODULE_AUTHOR("Johannes Berg <johannes@sipsolutions.net>");
*
* GPL v2, can be found in COPYING.
*
- * This file contains the GPIO control routines for
+ * This file contains the GPIO control routines for
* direct (through feature calls) access to the GPIO
* registers.
*/
+snd-aoa-fabric-layout-objs += layout.o
+
obj-$(CONFIG_SND_AOA_FABRIC_LAYOUT) += snd-aoa-fabric-layout.o
unsigned int layout_id;
struct codec_connect_info codecs[MAX_CODECS_PER_BUS];
int flags;
-
+
/* if busname is not assigned, we use 'Master' below,
* so that our layout table doesn't need to be filled
* too much.
obj-$(CONFIG_SND_AOA_SOUNDBUS_I2S) += snd-aoa-i2sbus.o
-snd-aoa-i2sbus-objs := i2sbus-core.o i2sbus-pcm.o i2sbus-control.o
+snd-aoa-i2sbus-objs := core.o pcm.o control.o
struct dbdma_command_mem *r)
{
if (!r->space) return;
-
+
dma_free_coherent(&macio_get_pci_dev(i2sdev->macio)->dev,
r->size, r->space, r->bus_addr);
}
* but request_resource doesn't know about parents and
* contained resources...
*/
- dev->allocated_resource[i] =
+ dev->allocated_resource[i] =
request_mem_region(dev->resources[i].start,
dev->resources[i].end -
dev->resources[i].start + 1,
#include <asm/pmac_feature.h>
#include <asm/dbdma.h>
-#include "i2sbus-interface.h"
+#include "interface.h"
#include "../soundbus.h"
struct i2sbus_control {
kfree(dev);
return 0;
}
- snd_printd("device free %p (from %p), not found\n", device_data,
+ snd_printd("device free %p (from %pF), not found\n", device_data,
__builtin_return_address(0));
return -ENXIO;
}
}
return 0;
}
- snd_printd("device disconnect %p (from %p), not found\n", device_data,
+ snd_printd("device disconnect %p (from %pF), not found\n", device_data,
__builtin_return_address(0));
return -ENXIO;
}
else
input_free_device(jack->input_dev);
+ kfree(jack->id);
kfree(jack);
return 0;
if (jack == NULL)
return -ENOMEM;
- jack->id = id;
+ jack->id = kstrdup(id, GFP_KERNEL);
jack->input_dev = input_allocate_device();
if (jack->input_dev == NULL) {
if (type & SND_JACK_HEADPHONE)
input_set_capability(jack->input_dev, EV_SW,
SW_HEADPHONE_INSERT);
+ if (type & SND_JACK_LINEOUT)
+ input_set_capability(jack->input_dev, EV_SW,
+ SW_LINEOUT_INSERT);
if (type & SND_JACK_MICROPHONE)
input_set_capability(jack->input_dev, EV_SW,
SW_MICROPHONE_INSERT);
+ if (type & SND_JACK_MECHANICAL)
+ input_set_capability(jack->input_dev, EV_SW,
+ SW_JACK_PHYSICAL_INSERT);
err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops);
if (err < 0)
if (jack->type & SND_JACK_HEADPHONE)
input_report_switch(jack->input_dev, SW_HEADPHONE_INSERT,
status & SND_JACK_HEADPHONE);
+ if (jack->type & SND_JACK_LINEOUT)
+ input_report_switch(jack->input_dev, SW_LINEOUT_INSERT,
+ status & SND_JACK_LINEOUT);
if (jack->type & SND_JACK_MICROPHONE)
input_report_switch(jack->input_dev, SW_MICROPHONE_INSERT,
status & SND_JACK_MICROPHONE);
+ if (jack->type & SND_JACK_MECHANICAL)
+ input_report_switch(jack->input_dev, SW_JACK_PHYSICAL_INSERT,
+ status & SND_JACK_MECHANICAL);
input_sync(jack->input_dev);
}
if (!substream->opened)
return;
if (up) {
- tasklet_hi_schedule(&substream->runtime->tasklet);
+ tasklet_schedule(&substream->runtime->tasklet);
} else {
tasklet_kill(&substream->runtime->tasklet);
substream->ops->trigger(substream, 0);
}
if (result > 0) {
if (runtime->event)
- tasklet_hi_schedule(&runtime->tasklet);
+ tasklet_schedule(&runtime->tasklet);
else if (snd_rawmidi_ready(substream))
wake_up(&runtime->sleep);
}
*/
static void rtctimer_interrupt(void *private_data)
{
- tasklet_hi_schedule(private_data);
+ tasklet_schedule(private_data);
}
spin_unlock_irqrestore(&timer->lock, flags);
if (use_tasklet)
- tasklet_hi_schedule(&timer->task_queue);
+ tasklet_schedule(&timer->task_queue);
}
/*
config SND_AC97_POWER_SAVE
bool "AC97 Power-Saving Mode"
- depends on SND_AC97_CODEC && EXPERIMENTAL
+ depends on SND_AC97_CODEC
default n
help
Say Y here to enable the aggressive power-saving support of
return -EINVAL;
hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- pcsp_chip.timer.cb_mode = HRTIMER_CB_SOFTIRQ;
+ pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE_UNLOCKED;
pcsp_chip.timer.function = pcsp_do_timer;
card = snd_card_new(index, id, THIS_MODULE, 0);
static void pcsp_stop_beep(struct snd_pcsp *chip)
{
- spin_lock_irq(&chip->substream_lock);
- if (!chip->playback_substream)
- pcspkr_stop_sound();
- spin_unlock_irq(&chip->substream_lock);
+ pcsp_sync_stop(chip);
+ pcspkr_stop_sound();
}
#ifdef CONFIG_PM
unsigned short port, irq, dma;
spinlock_t substream_lock;
struct snd_pcm_substream *playback_substream;
+ unsigned int fmt_size;
+ unsigned int is_signed;
size_t playback_ptr;
size_t period_ptr;
atomic_t timer_active;
extern struct snd_pcsp pcsp_chip;
extern enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle);
+extern void pcsp_sync_stop(struct snd_pcsp *chip);
extern int snd_pcsp_new_pcm(struct snd_pcsp *chip);
extern int snd_pcsp_new_mixer(struct snd_pcsp *chip);
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
#include <sound/pcm.h>
#include <asm/io.h>
#include "pcsp.h"
#define DMIX_WANTS_S16 1
-enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
+/*
+ * Call snd_pcm_period_elapsed in a tasklet
+ * This avoids spinlock messes and long-running irq contexts
+ */
+static void pcsp_call_pcm_elapsed(unsigned long priv)
+{
+ if (atomic_read(&pcsp_chip.timer_active)) {
+ struct snd_pcm_substream *substream;
+ substream = pcsp_chip.playback_substream;
+ if (substream)
+ snd_pcm_period_elapsed(substream);
+ }
+}
+
+static DECLARE_TASKLET(pcsp_pcm_tasklet, pcsp_call_pcm_elapsed, 0);
+
+/* write the port and returns the next expire time in ns;
+ * called at the trigger-start and in hrtimer callback
+ */
+static unsigned long pcsp_timer_update(struct hrtimer *handle)
{
unsigned char timer_cnt, val;
- int fmt_size, periods_elapsed;
u64 ns;
- size_t period_bytes, buffer_bytes;
struct snd_pcm_substream *substream;
struct snd_pcm_runtime *runtime;
struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer);
+ unsigned long flags;
if (chip->thalf) {
outb(chip->val61, 0x61);
chip->thalf = 0;
if (!atomic_read(&chip->timer_active))
- return HRTIMER_NORESTART;
- hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
- ktime_set(0, chip->ns_rem));
- return HRTIMER_RESTART;
+ return 0;
+ return chip->ns_rem;
}
- spin_lock_irq(&chip->substream_lock);
- /* Takashi Iwai says regarding this extra lock:
-
- If the irq handler handles some data on the DMA buffer, it should
- do snd_pcm_stream_lock().
- That protects basically against all races among PCM callbacks, yes.
- However, there are two remaining issues:
- 1. The substream pointer you try to lock isn't protected _before_
- this lock yet.
- 2. snd_pcm_period_elapsed() itself acquires the lock.
- The requirement of another lock is because of 1. When you get
- chip->playback_substream, it's not protected.
- Keeping this lock while snd_pcm_period_elapsed() assures the substream
- is still protected (at least, not released). And the other status is
- handled properly inside snd_pcm_stream_lock() in
- snd_pcm_period_elapsed().
-
- */
- if (!chip->playback_substream)
- goto exit_nr_unlock1;
- substream = chip->playback_substream;
- snd_pcm_stream_lock(substream);
if (!atomic_read(&chip->timer_active))
- goto exit_nr_unlock2;
+ return 0;
+ substream = chip->playback_substream;
+ if (!substream)
+ return 0;
runtime = substream->runtime;
- fmt_size = snd_pcm_format_physical_width(runtime->format) >> 3;
/* assume it is mono! */
- val = runtime->dma_area[chip->playback_ptr + fmt_size - 1];
- if (snd_pcm_format_signed(runtime->format))
+ val = runtime->dma_area[chip->playback_ptr + chip->fmt_size - 1];
+ if (chip->is_signed)
val ^= 0x80;
timer_cnt = val * CUR_DIV() / 256;
if (timer_cnt && chip->enable) {
- spin_lock(&i8253_lock);
+ spin_lock_irqsave(&i8253_lock, flags);
if (!nforce_wa) {
outb_p(chip->val61, 0x61);
outb_p(timer_cnt, 0x42);
outb(chip->val61 ^ 2, 0x61);
chip->thalf = 1;
}
- spin_unlock(&i8253_lock);
+ spin_unlock_irqrestore(&i8253_lock, flags);
}
+ chip->ns_rem = PCSP_PERIOD_NS();
+ ns = (chip->thalf ? PCSP_CALC_NS(timer_cnt) : chip->ns_rem);
+ chip->ns_rem -= ns;
+ return ns;
+}
+
+enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
+{
+ struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer);
+ struct snd_pcm_substream *substream;
+ int periods_elapsed, pointer_update;
+ size_t period_bytes, buffer_bytes;
+ unsigned long ns;
+ unsigned long flags;
+
+ pointer_update = !chip->thalf;
+ ns = pcsp_timer_update(handle);
+ if (!ns)
+ return HRTIMER_NORESTART;
+
+ /* update the playback position */
+ substream = chip->playback_substream;
+ if (!substream)
+ return HRTIMER_NORESTART;
+
period_bytes = snd_pcm_lib_period_bytes(substream);
buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- chip->playback_ptr += PCSP_INDEX_INC() * fmt_size;
+
+ spin_lock_irqsave(&chip->substream_lock, flags);
+ chip->playback_ptr += PCSP_INDEX_INC() * chip->fmt_size;
periods_elapsed = chip->playback_ptr - chip->period_ptr;
if (periods_elapsed < 0) {
#if PCSP_DEBUG
* or ALSA will BUG on us. */
chip->playback_ptr %= buffer_bytes;
- snd_pcm_stream_unlock(substream);
-
if (periods_elapsed) {
- snd_pcm_period_elapsed(substream);
chip->period_ptr += periods_elapsed * period_bytes;
chip->period_ptr %= buffer_bytes;
}
+ spin_unlock_irqrestore(&chip->substream_lock, flags);
- spin_unlock_irq(&chip->substream_lock);
+ if (periods_elapsed)
+ tasklet_schedule(&pcsp_pcm_tasklet);
- if (!atomic_read(&chip->timer_active))
- return HRTIMER_NORESTART;
+ hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns));
- chip->ns_rem = PCSP_PERIOD_NS();
- ns = (chip->thalf ? PCSP_CALC_NS(timer_cnt) : chip->ns_rem);
- chip->ns_rem -= ns;
- hrtimer_forward(&chip->timer, hrtimer_get_expires(&chip->timer),
- ktime_set(0, ns));
return HRTIMER_RESTART;
-
-exit_nr_unlock2:
- snd_pcm_stream_unlock(substream);
-exit_nr_unlock1:
- spin_unlock_irq(&chip->substream_lock);
- return HRTIMER_NORESTART;
}
-static void pcsp_start_playing(struct snd_pcsp *chip)
+static int pcsp_start_playing(struct snd_pcsp *chip)
{
+ unsigned long ns;
+
#if PCSP_DEBUG
printk(KERN_INFO "PCSP: start_playing called\n");
#endif
if (atomic_read(&chip->timer_active)) {
printk(KERN_ERR "PCSP: Timer already active\n");
- return;
+ return -EIO;
}
spin_lock(&i8253_lock);
atomic_set(&chip->timer_active, 1);
chip->thalf = 0;
- hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
+ ns = pcsp_timer_update(&pcsp_chip.timer);
+ if (!ns)
+ return -EIO;
+
+ hrtimer_start(&pcsp_chip.timer, ktime_set(0, ns), HRTIMER_MODE_REL);
+ return 0;
}
static void pcsp_stop_playing(struct snd_pcsp *chip)
spin_unlock(&i8253_lock);
}
+/*
+ * Force to stop and sync the stream
+ */
+void pcsp_sync_stop(struct snd_pcsp *chip)
+{
+ local_irq_disable();
+ pcsp_stop_playing(chip);
+ local_irq_enable();
+ hrtimer_cancel(&chip->timer);
+ tasklet_kill(&pcsp_pcm_tasklet);
+}
+
static int snd_pcsp_playback_close(struct snd_pcm_substream *substream)
{
struct snd_pcsp *chip = snd_pcm_substream_chip(substream);
#if PCSP_DEBUG
printk(KERN_INFO "PCSP: close called\n");
#endif
- if (atomic_read(&chip->timer_active)) {
- printk(KERN_ERR "PCSP: timer still active\n");
- pcsp_stop_playing(chip);
- }
- spin_lock_irq(&chip->substream_lock);
+ pcsp_sync_stop(chip);
chip->playback_substream = NULL;
- spin_unlock_irq(&chip->substream_lock);
return 0;
}
static int snd_pcsp_playback_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
+ struct snd_pcsp *chip = snd_pcm_substream_chip(substream);
int err;
+ pcsp_sync_stop(chip);
err = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
if (err < 0)
static int snd_pcsp_playback_hw_free(struct snd_pcm_substream *substream)
{
+ struct snd_pcsp *chip = snd_pcm_substream_chip(substream);
#if PCSP_DEBUG
printk(KERN_INFO "PCSP: hw_free called\n");
#endif
+ pcsp_sync_stop(chip);
return snd_pcm_lib_free_pages(substream);
}
snd_pcm_lib_period_bytes(substream),
substream->runtime->periods);
#endif
+ pcsp_sync_stop(chip);
chip->playback_ptr = 0;
chip->period_ptr = 0;
+ chip->fmt_size =
+ snd_pcm_format_physical_width(substream->runtime->format) >> 3;
+ chip->is_signed = snd_pcm_format_signed(substream->runtime->format);
return 0;
}
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
- pcsp_start_playing(chip);
- break;
+ return pcsp_start_playing(chip);
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
pcsp_stop_playing(chip);
*substream)
{
struct snd_pcsp *chip = snd_pcm_substream_chip(substream);
- return bytes_to_frames(substream->runtime, chip->playback_ptr);
+ unsigned int pos;
+ spin_lock(&chip->substream_lock);
+ pos = chip->playback_ptr;
+ spin_unlock(&chip->substream_lock);
+ return bytes_to_frames(substream->runtime, pos);
}
static struct snd_pcm_hardware snd_pcsp_playback = {
return -EBUSY;
}
runtime->hw = snd_pcsp_playback;
- spin_lock_irq(&chip->substream_lock);
chip->playback_substream = substream;
- spin_unlock_irq(&chip->substream_lock);
return 0;
}
(chip->chip_status & VX_STAT_IS_STALE))
return IRQ_NONE;
if (! vx_test_and_ack(chip))
- tasklet_hi_schedule(&chip->tq);
+ tasklet_schedule(&chip->tq);
return IRQ_HANDLED;
}
* we trigger the pipe using tasklet, so that the interrupts are
* issued surely after the trigger is completed.
*/
- tasklet_hi_schedule(&pipe->start_tq);
+ tasklet_schedule(&pipe->start_tq);
chip->pcm_running++;
pipe->running = 1;
break;
break;
}
}
- if (i >= ARRAY_SIZE(possible_ports))
+ if (i >= ARRAY_SIZE(possible_ports)) {
+ err = -EINVAL;
goto _err;
+ }
}
acard->chip = chip;
* AuzenTech X-Meridian
* Bgears b-Enspirer
* Club3D Theatron DTS
- * HT-Omega Claro
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
* Razer Barracuda AC-1
* Sondigo Inferno
depends on SND_FM801_TEA575X_BOOL
default SND_FM801
-config SND_HDA_INTEL
- tristate "Intel HD Audio"
- select SND_PCM
- select SND_VMASTER
- help
- Say Y here to include support for Intel "High Definition
- Audio" (Azalia) motherboard devices.
-
- To compile this driver as a module, choose M here: the module
- will be called snd-hda-intel.
-
-config SND_HDA_HWDEP
- bool "Build hwdep interface for HD-audio driver"
- depends on SND_HDA_INTEL
- select SND_HWDEP
- help
- Say Y here to build a hwdep interface for HD-audio driver.
- This interface can be used for out-of-band communication
- with codecs for debugging purposes.
-
-config SND_HDA_INPUT_BEEP
- bool "Support digital beep via input layer"
- depends on SND_HDA_INTEL
- depends on INPUT=y || INPUT=SND_HDA_INTEL
- help
- Say Y here to build a digital beep interface for HD-audio
- driver. This interface is used to generate digital beeps.
-
-config SND_HDA_CODEC_REALTEK
- bool "Build Realtek HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Realtek HD-audio codec support in
- snd-hda-intel driver, such as ALC880.
-
-config SND_HDA_CODEC_ANALOG
- bool "Build Analog Device HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Analog Device HD-audio codec support in
- snd-hda-intel driver, such as AD1986A.
-
-config SND_HDA_CODEC_SIGMATEL
- bool "Build IDT/Sigmatel HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include IDT (Sigmatel) HD-audio codec support in
- snd-hda-intel driver, such as STAC9200.
-
-config SND_HDA_CODEC_VIA
- bool "Build VIA HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include VIA HD-audio codec support in
- snd-hda-intel driver, such as VT1708.
-
-config SND_HDA_CODEC_ATIHDMI
- bool "Build ATI HDMI HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include ATI HDMI HD-audio codec support in
- snd-hda-intel driver, such as ATI RS600 HDMI.
-
-config SND_HDA_CODEC_NVHDMI
- bool "Build NVIDIA HDMI HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include NVIDIA HDMI HD-audio codec support in
- snd-hda-intel driver, such as NVIDIA MCP78 HDMI.
-
-config SND_HDA_CODEC_CONEXANT
- bool "Build Conexant HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Conexant HD-audio codec support in
- snd-hda-intel driver, such as CX20549.
-
-config SND_HDA_CODEC_CMEDIA
- bool "Build C-Media HD-audio codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include C-Media HD-audio codec support in
- snd-hda-intel driver, such as CMI9880.
-
-config SND_HDA_CODEC_SI3054
- bool "Build Silicon Labs 3054 HD-modem codec support"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to include Silicon Labs 3054 HD-modem codec
- (and compatibles) support in snd-hda-intel driver.
-
-config SND_HDA_GENERIC
- bool "Enable generic HD-audio codec parser"
- depends on SND_HDA_INTEL
- default y
- help
- Say Y here to enable the generic HD-audio codec parser
- in snd-hda-intel driver.
-
-config SND_HDA_POWER_SAVE
- bool "Aggressive power-saving on HD-audio"
- depends on SND_HDA_INTEL && EXPERIMENTAL
- help
- Say Y here to enable more aggressive power-saving mode on
- HD-audio driver. The power-saving timeout can be configured
- via power_save option or over sysfs on-the-fly.
-
-config SND_HDA_POWER_SAVE_DEFAULT
- int "Default time-out for HD-audio power-save mode"
- depends on SND_HDA_POWER_SAVE
- default 0
- help
- The default time-out value in seconds for HD-audio automatic
- power-save mode. 0 means to disable the power-save mode.
+source "sound/pci/hda/Kconfig"
config SND_HDSP
tristate "RME Hammerfall DSP Audio"
{ 0x574d4C04, 0xffffffff, "WM9704M,WM9704Q", patch_wolfson04, NULL},
{ 0x574d4C05, 0xffffffff, "WM9705,WM9710", patch_wolfson05, NULL},
{ 0x574d4C09, 0xffffffff, "WM9709", NULL, NULL},
-{ 0x574d4C12, 0xffffffff, "WM9711,WM9712", patch_wolfson11, NULL},
+{ 0x574d4C12, 0xffffffff, "WM9711,WM9712,WM9715", patch_wolfson11, NULL},
{ 0x574d4c13, 0xffffffff, "WM9713,WM9714", patch_wolfson13, NULL, AC97_DEFAULT_POWER_OFF},
{ 0x594d4800, 0xffffffff, "YMF743", patch_yamaha_ymf743, NULL },
{ 0x594d4802, 0xffffffff, "YMF752", NULL, NULL },
.get = snd_ac97_ad1888_lohpsel_get,
.put = snd_ac97_ad1888_lohpsel_put
},
- AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, 2, 1, 1),
- AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2, 12, 1, 1),
+ AC97_SINGLE("V_REFOUT Enable", AC97_AD_MISC, AC97_AD_VREFD_SHIFT, 1, 1),
+ AC97_SINGLE("High Pass Filter Enable", AC97_AD_TEST2,
+ AC97_AD_HPFD_SHIFT, 1, 1),
AC97_SINGLE("Spread Front to Surround and Center/LFE", AC97_AD_MISC, 7, 1, 0),
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
val &= ~(1 << 1); /* Pin 47 is EAPD (for internal speaker) */
else
val |= (1 << 1); /* Pin 47 is spdif input pin */
+ /* this seems missing on some hardwares */
+ ac97->ext_id |= AC97_EI_SPDIF;
}
val &= ~(1 << 12); /* vref enable */
snd_ac97_write_cache(ac97, 0x7a, val);
struct snd_ca0106_details {
u32 serial;
char * name;
- int ac97;
- int gpio_type;
- int i2c_adc;
- int spi_dac;
+ int ac97; /* ac97 = 0 -> Select MIC, Line in, TAD in, AUX in.
+ ac97 = 1 -> Default to AC97 in. */
+ int gpio_type; /* gpio_type = 1 -> shared mic-in/line-in
+ gpio_type = 2 -> shared side-out/line-in. */
+ int i2c_adc; /* with i2c_adc=1, the driver adds some capture volume
+ controls, phone, mic, line-in and aux. */
+ int spi_dac; /* spi_dac=1 adds the mute switch for each analog
+ output, front, rear, etc. */
};
// definition of the chip-specific record
spinlock_t emu_lock;
struct snd_ac97 *ac97;
- struct snd_pcm *pcm;
+ struct snd_pcm *pcm[4];
struct snd_ca0106_channel playback_channels[4];
struct snd_ca0106_channel capture_channels[4];
- u32 spdif_bits[4]; /* s/pdif out setup */
+ u32 spdif_bits[4]; /* s/pdif out default setup */
+ u32 spdif_str_bits[4]; /* s/pdif out per-stream setup */
int spdif_enable;
int capture_source;
int i2c_capture_source;
struct snd_ca_midi midi2;
u16 spi_dac_reg[16];
+
+#ifdef CONFIG_PM
+#define NUM_SAVED_VOLUMES 9
+ unsigned int saved_vol[NUM_SAVED_VOLUMES];
+#endif
};
int snd_ca0106_mixer(struct snd_ca0106 *emu);
int snd_ca0106_spi_write(struct snd_ca0106 * emu,
unsigned int data);
+
+#ifdef CONFIG_PM
+void snd_ca0106_mixer_suspend(struct snd_ca0106 *chip);
+void snd_ca0106_mixer_resume(struct snd_ca0106 *chip);
+#else
+#define snd_ca0106_mixer_suspend(chip) do { } while (0)
+#define snd_ca0106_mixer_resume(chip) do { } while (0)
+#endif
.name = "MSI K8N Diamond MB",
.gpio_type = 2,
.i2c_adc = 1,
- .spi_dac = 2 } ,
+ .spi_dac = 1 } ,
/* Shuttle XPC SD31P which has an onboard Creative Labs
* Sound Blaster Live! 24-bit EAX
* high-definition 7.1 audio processor".
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
+#if 0 /* FIXME: looks like 44.1kHz capture causes noisy output on 48kHz */
.rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000),
.rate_min = 44100,
+#else
+ .rates = (SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000),
+ .rate_min = 48000,
+#endif /* FIXME */
.rate_max = 192000,
.channels_min = 2,
.channels_max = 2,
[PCM_UNKNOWN_CHANNEL] = SPI_DACD1_BIT,
};
+static void restore_spdif_bits(struct snd_ca0106 *chip, int idx)
+{
+ if (chip->spdif_str_bits[idx] != chip->spdif_bits[idx]) {
+ chip->spdif_str_bits[idx] = chip->spdif_bits[idx];
+ snd_ca0106_ptr_write(chip, SPCS0 + idx, 0,
+ chip->spdif_str_bits[idx]);
+ }
+}
+
/* open_playback callback */
static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substream,
int channel_id)
if (err < 0)
return err;
}
+
+ restore_spdif_bits(chip, channel_id);
+
return 0;
}
struct snd_ca0106_pcm *epcm = runtime->private_data;
chip->playback_channels[epcm->channel_id].use = 0;
+ restore_spdif_bits(chip, epcm->channel_id);
+
if (chip->details->spi_dac && epcm->channel_id != PCM_FRONT_CHANNEL) {
const int reg = spi_dacd_reg[epcm->channel_id];
struct snd_pcm_substream *s;
u32 basic = 0;
u32 extended = 0;
- int running=0;
+ u32 bits;
+ int running = 0;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- running=1;
+ case SNDRV_PCM_TRIGGER_RESUME:
+ running = 1;
break;
case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
default:
- running=0;
+ running = 0;
break;
}
snd_pcm_group_for_each_entry(s, substream) {
runtime = s->runtime;
epcm = runtime->private_data;
channel = epcm->channel_id;
- //snd_printk("channel=%d\n",channel);
+ /* snd_printk("channel=%d\n",channel); */
epcm->running = running;
- basic |= (0x1<<channel);
- extended |= (0x10<<channel);
+ basic |= (0x1 << channel);
+ extended |= (0x10 << channel);
snd_pcm_trigger_done(s, substream);
}
- //snd_printk("basic=0x%x, extended=0x%x\n",basic, extended);
+ /* snd_printk("basic=0x%x, extended=0x%x\n",basic, extended); */
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
- snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) | (extended));
- snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0)|(basic));
+ case SNDRV_PCM_TRIGGER_RESUME:
+ bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0);
+ bits |= extended;
+ snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits);
+ bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0);
+ bits |= basic;
+ snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits);
break;
case SNDRV_PCM_TRIGGER_STOP:
- snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0) & ~(basic));
- snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) & ~(extended));
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0);
+ bits &= ~basic;
+ snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits);
+ bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0);
+ bits &= ~extended;
+ snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits);
break;
default:
result = -EINVAL;
return snd_ac97_mixer(pbus, &ac97, &chip->ac97);
}
+static void ca0106_stop_chip(struct snd_ca0106 *chip);
+
static int snd_ca0106_free(struct snd_ca0106 *chip)
{
- if (chip->res_port != NULL) { /* avoid access to already used hardware */
- // disable interrupts
- snd_ca0106_ptr_write(chip, BASIC_INTERRUPT, 0, 0);
- outl(0, chip->port + INTE);
- snd_ca0106_ptr_write(chip, EXTENDED_INT_MASK, 0, 0);
- udelay(1000);
- // disable audio
- //outl(HCFG_LOCKSOUNDCACHE, chip->port + HCFG);
- outl(0, chip->port + HCFG);
- /* FIXME: We need to stop and DMA transfers here.
- * But as I am not sure how yet, we cannot from the dma pages.
- * So we can fix: snd-malloc: Memory leak? pages not freed = 8
- */
+ if (chip->res_port != NULL) {
+ /* avoid access to already used hardware */
+ ca0106_stop_chip(chip);
}
if (chip->irq >= 0)
free_irq(chip->irq, chip);
return IRQ_HANDLED;
}
-static int __devinit snd_ca0106_pcm(struct snd_ca0106 *emu, int device, struct snd_pcm **rpcm)
+static int __devinit snd_ca0106_pcm(struct snd_ca0106 *emu, int device)
{
struct snd_pcm *pcm;
struct snd_pcm_substream *substream;
int err;
- if (rpcm)
- *rpcm = NULL;
- if ((err = snd_pcm_new(emu->card, "ca0106", device, 1, 1, &pcm)) < 0)
+ err = snd_pcm_new(emu->card, "ca0106", device, 1, 1, &pcm);
+ if (err < 0)
return err;
pcm->private_data = emu;
pcm->info_flags = 0;
pcm->dev_subclass = SNDRV_PCM_SUBCLASS_GENERIC_MIX;
strcpy(pcm->name, "CA0106");
- emu->pcm = pcm;
for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
substream;
return err;
}
- if (rpcm)
- *rpcm = pcm;
+ emu->pcm[device] = pcm;
return 0;
}
{ 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */
};
-static int __devinit snd_ca0106_create(int dev, struct snd_card *card,
- struct pci_dev *pci,
- struct snd_ca0106 **rchip)
+static void ca0106_init_chip(struct snd_ca0106 *chip, int resume)
{
- struct snd_ca0106 *chip;
- struct snd_ca0106_details *c;
- int err;
int ch;
- static struct snd_device_ops ops = {
- .dev_free = snd_ca0106_dev_free,
- };
-
- *rchip = NULL;
-
- if ((err = pci_enable_device(pci)) < 0)
- return err;
- if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0) {
- printk(KERN_ERR "error to set 32bit mask DMA\n");
- pci_disable_device(pci);
- return -ENXIO;
- }
-
- chip = kzalloc(sizeof(*chip), GFP_KERNEL);
- if (chip == NULL) {
- pci_disable_device(pci);
- return -ENOMEM;
- }
-
- chip->card = card;
- chip->pci = pci;
- chip->irq = -1;
-
- spin_lock_init(&chip->emu_lock);
-
- chip->port = pci_resource_start(pci, 0);
- if ((chip->res_port = request_region(chip->port, 0x20,
- "snd_ca0106")) == NULL) {
- snd_ca0106_free(chip);
- printk(KERN_ERR "cannot allocate the port\n");
- return -EBUSY;
- }
-
- if (request_irq(pci->irq, snd_ca0106_interrupt,
- IRQF_SHARED, "snd_ca0106", chip)) {
- snd_ca0106_free(chip);
- printk(KERN_ERR "cannot grab irq\n");
- return -EBUSY;
- }
- chip->irq = pci->irq;
-
- /* This stores the periods table. */
- if(snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), 1024, &chip->buffer) < 0) {
- snd_ca0106_free(chip);
- return -ENOMEM;
- }
-
- pci_set_master(pci);
- /* read serial */
- pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
- pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
-#if 1
- printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n", chip->model,
- pci->revision, chip->serial);
-#endif
- strcpy(card->driver, "CA0106");
- strcpy(card->shortname, "CA0106");
-
- for (c = ca0106_chip_details; c->serial; c++) {
- if (subsystem[dev]) {
- if (c->serial == subsystem[dev])
- break;
- } else if (c->serial == chip->serial)
- break;
- }
- chip->details = c;
- if (subsystem[dev]) {
- printk(KERN_INFO "snd-ca0106: Sound card name=%s, subsystem=0x%x. Forced to subsystem=0x%x\n",
- c->name, chip->serial, subsystem[dev]);
- }
-
- sprintf(card->longname, "%s at 0x%lx irq %i",
- c->name, chip->port, chip->irq);
+ unsigned int def_bits;
outl(0, chip->port + INTE);
* AN = 0 (Audio data)
* P = 0 (Consumer)
*/
- snd_ca0106_ptr_write(chip, SPCS0, 0,
- chip->spdif_bits[0] =
- SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
- SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
- SPCS_GENERATIONSTATUS | 0x00001200 |
- 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
+ def_bits =
+ SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
+ SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
+ SPCS_GENERATIONSTATUS | 0x00001200 |
+ 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT;
+ if (!resume) {
+ chip->spdif_str_bits[0] = chip->spdif_bits[0] = def_bits;
+ chip->spdif_str_bits[1] = chip->spdif_bits[1] = def_bits;
+ chip->spdif_str_bits[2] = chip->spdif_bits[2] = def_bits;
+ chip->spdif_str_bits[3] = chip->spdif_bits[3] = def_bits;
+ }
/* Only SPCS1 has been tested */
- snd_ca0106_ptr_write(chip, SPCS1, 0,
- chip->spdif_bits[1] =
- SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
- SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
- SPCS_GENERATIONSTATUS | 0x00001200 |
- 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
- snd_ca0106_ptr_write(chip, SPCS2, 0,
- chip->spdif_bits[2] =
- SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
- SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
- SPCS_GENERATIONSTATUS | 0x00001200 |
- 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
- snd_ca0106_ptr_write(chip, SPCS3, 0,
- chip->spdif_bits[3] =
- SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
- SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
- SPCS_GENERATIONSTATUS | 0x00001200 |
- 0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT);
+ snd_ca0106_ptr_write(chip, SPCS1, 0, chip->spdif_str_bits[1]);
+ snd_ca0106_ptr_write(chip, SPCS0, 0, chip->spdif_str_bits[0]);
+ snd_ca0106_ptr_write(chip, SPCS2, 0, chip->spdif_str_bits[2]);
+ snd_ca0106_ptr_write(chip, SPCS3, 0, chip->spdif_str_bits[3]);
snd_ca0106_ptr_write(chip, PLAYBACK_MUTE, 0, 0x00fc0000);
snd_ca0106_ptr_write(chip, CAPTURE_MUTE, 0, 0x00fc0000);
/* Write 0x8000 to AC97_REC_GAIN to mute it. */
outb(AC97_REC_GAIN, chip->port + AC97ADDRESS);
outw(0x8000, chip->port + AC97DATA);
-#if 0
+#if 0 /* FIXME: what are these? */
snd_ca0106_ptr_write(chip, SPCS0, 0, 0x2108006);
snd_ca0106_ptr_write(chip, 0x42, 0, 0x2108006);
snd_ca0106_ptr_write(chip, 0x43, 0, 0x2108006);
snd_ca0106_ptr_write(chip, 0x44, 0, 0x2108006);
#endif
- //snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0xf0f003f); /* OSS drivers set this. */
+ /* OSS drivers set this. */
+ /* snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0xf0f003f); */
+
/* Analog or Digital output */
snd_ca0106_ptr_write(chip, SPDIF_SELECT1, 0, 0xf);
- snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0x000f0000); /* 0x0b000000 for digital, 0x000b0000 for analog, from win2000 drivers. Use 0x000f0000 for surround71 */
+ /* 0x0b000000 for digital, 0x000b0000 for analog, from win2000 drivers.
+ * Use 0x000f0000 for surround71
+ */
+ snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0x000f0000);
+
chip->spdif_enable = 0; /* Set digital SPDIF output off */
- //snd_ca0106_ptr_write(chip, 0x45, 0, 0); /* Analogue out */
- //snd_ca0106_ptr_write(chip, 0x45, 0, 0xf00); /* Digital out */
+ /*snd_ca0106_ptr_write(chip, 0x45, 0, 0);*/ /* Analogue out */
+ /*snd_ca0106_ptr_write(chip, 0x45, 0, 0xf00);*/ /* Digital out */
+
+ /* goes to 0x40c80000 when doing SPDIF IN/OUT */
+ snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 0, 0x40c81000);
+ /* (Mute) CAPTURE feedback into PLAYBACK volume.
+ * Only lower 16 bits matter.
+ */
+ snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 1, 0xffffffff);
+ /* SPDIF IN Volume */
+ snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 2, 0x30300000);
+ /* SPDIF IN Volume, 0x70 = (vol & 0x3f) | 0x40 */
+ snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 3, 0x00700000);
- snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 0, 0x40c81000); /* goes to 0x40c80000 when doing SPDIF IN/OUT */
- snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 1, 0xffffffff); /* (Mute) CAPTURE feedback into PLAYBACK volume. Only lower 16 bits matter. */
- snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 2, 0x30300000); /* SPDIF IN Volume */
- snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 3, 0x00700000); /* SPDIF IN Volume, 0x70 = (vol & 0x3f) | 0x40 */
snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING1, 0, 0x32765410);
snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING2, 0, 0x76767676);
snd_ca0106_ptr_write(chip, CAPTURE_ROUTING1, 0, 0x32765410);
snd_ca0106_ptr_write(chip, CAPTURE_ROUTING2, 0, 0x76767676);
- for(ch = 0; ch < 4; ch++) {
- snd_ca0106_ptr_write(chip, CAPTURE_VOLUME1, ch, 0x30303030); /* Only high 16 bits matter */
+
+ for (ch = 0; ch < 4; ch++) {
+ /* Only high 16 bits matter */
+ snd_ca0106_ptr_write(chip, CAPTURE_VOLUME1, ch, 0x30303030);
snd_ca0106_ptr_write(chip, CAPTURE_VOLUME2, ch, 0x30303030);
- //snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0x40404040); /* Mute */
- //snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0x40404040); /* Mute */
- snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0xffffffff); /* Mute */
- snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0xffffffff); /* Mute */
+#if 0 /* Mute */
+ snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0x40404040);
+ snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0x40404040);
+ snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0xffffffff);
+ snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0xffffffff);
+#endif
}
if (chip->details->i2c_adc == 1) {
/* Select MIC, Line in, TAD in, AUX in */
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4);
/* Default to CAPTURE_SOURCE to i2s in */
- chip->capture_source = 3;
+ if (!resume)
+ chip->capture_source = 3;
} else if (chip->details->ac97 == 1) {
/* Default to AC97 in */
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x444400e4);
/* Default to CAPTURE_SOURCE to AC97 in */
- chip->capture_source = 4;
+ if (!resume)
+ chip->capture_source = 4;
} else {
/* Select MIC, Line in, TAD in, AUX in */
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4);
/* Default to Set CAPTURE_SOURCE to i2s in */
- chip->capture_source = 3;
+ if (!resume)
+ chip->capture_source = 3;
}
- if (chip->details->gpio_type == 2) { /* The SB0438 use GPIO differently. */
- /* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */
+ if (chip->details->gpio_type == 2) {
+ /* The SB0438 use GPIO differently. */
+ /* FIXME: Still need to find out what the other GPIO bits do.
+ * E.g. For digital spdif out.
+ */
outl(0x0, chip->port+GPIO);
- //outl(0x00f0e000, chip->port+GPIO); /* Analog */
+ /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
outl(0x005f5301, chip->port+GPIO); /* Analog */
- } else if (chip->details->gpio_type == 1) { /* The SB0410 and SB0413 use GPIO differently. */
- /* FIXME: Still need to find out what the other GPIO bits do. E.g. For digital spdif out. */
+ } else if (chip->details->gpio_type == 1) {
+ /* The SB0410 and SB0413 use GPIO differently. */
+ /* FIXME: Still need to find out what the other GPIO bits do.
+ * E.g. For digital spdif out.
+ */
outl(0x0, chip->port+GPIO);
- //outl(0x00f0e000, chip->port+GPIO); /* Analog */
+ /* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
outl(0x005f5301, chip->port+GPIO); /* Analog */
} else {
outl(0x0, chip->port+GPIO);
outl(0x005f03a3, chip->port+GPIO); /* Analog */
- //outl(0x005f02a2, chip->port+GPIO); /* SPDIF */
+ /* outl(0x005f02a2, chip->port+GPIO); */ /* SPDIF */
}
snd_ca0106_intr_enable(chip, 0x105); /* Win2000 uses 0x1e0 */
- //outl(HCFG_LOCKSOUNDCACHE|HCFG_AUDIOENABLE, chip->port+HCFG);
- //outl(0x00001409, chip->port+HCFG); /* 0x1000 causes AC3 to fails. Maybe it effects 24 bit output. */
- //outl(0x00000009, chip->port+HCFG);
- outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG); /* AC97 2.0, Enable outputs. */
+ /* outl(HCFG_LOCKSOUNDCACHE|HCFG_AUDIOENABLE, chip->port+HCFG); */
+ /* 0x1000 causes AC3 to fails. Maybe it effects 24 bit output. */
+ /* outl(0x00001409, chip->port+HCFG); */
+ /* outl(0x00000009, chip->port+HCFG); */
+ /* AC97 2.0, Enable outputs. */
+ outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG);
- if (chip->details->i2c_adc == 1) { /* The SB0410 and SB0413 use I2C to control ADC. */
+ if (chip->details->i2c_adc == 1) {
+ /* The SB0410 and SB0413 use I2C to control ADC. */
int size, n;
size = ARRAY_SIZE(i2c_adc_init);
- //snd_printk("I2C:array size=0x%x\n", size);
- for (n=0; n < size; n++) {
- snd_ca0106_i2c_write(chip, i2c_adc_init[n][0], i2c_adc_init[n][1]);
- }
- for (n=0; n < 4; n++) {
- chip->i2c_capture_volume[n][0]= 0xcf;
- chip->i2c_capture_volume[n][1]= 0xcf;
+ /* snd_printk("I2C:array size=0x%x\n", size); */
+ for (n = 0; n < size; n++)
+ snd_ca0106_i2c_write(chip, i2c_adc_init[n][0],
+ i2c_adc_init[n][1]);
+ for (n = 0; n < 4; n++) {
+ chip->i2c_capture_volume[n][0] = 0xcf;
+ chip->i2c_capture_volume[n][1] = 0xcf;
}
- chip->i2c_capture_source=2; /* Line in */
- //snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); /* Enable Line-in capture. MIC in currently untested. */
+ chip->i2c_capture_source = 2; /* Line in */
+ /* Enable Line-in capture. MIC in currently untested. */
+ /* snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); */
}
- if (chip->details->spi_dac == 1) { /* The SB0570 use SPI to control DAC. */
+
+ if (chip->details->spi_dac == 1) {
+ /* The SB0570 use SPI to control DAC. */
int size, n;
size = ARRAY_SIZE(spi_dac_init);
chip->spi_dac_reg[reg] = spi_dac_init[n];
}
}
+}
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL,
- chip, &ops)) < 0) {
+static void ca0106_stop_chip(struct snd_ca0106 *chip)
+{
+ /* disable interrupts */
+ snd_ca0106_ptr_write(chip, BASIC_INTERRUPT, 0, 0);
+ outl(0, chip->port + INTE);
+ snd_ca0106_ptr_write(chip, EXTENDED_INT_MASK, 0, 0);
+ udelay(1000);
+ /* disable audio */
+ /* outl(HCFG_LOCKSOUNDCACHE, chip->port + HCFG); */
+ outl(0, chip->port + HCFG);
+ /* FIXME: We need to stop and DMA transfers here.
+ * But as I am not sure how yet, we cannot from the dma pages.
+ * So we can fix: snd-malloc: Memory leak? pages not freed = 8
+ */
+}
+
+static int __devinit snd_ca0106_create(int dev, struct snd_card *card,
+ struct pci_dev *pci,
+ struct snd_ca0106 **rchip)
+{
+ struct snd_ca0106 *chip;
+ struct snd_ca0106_details *c;
+ int err;
+ static struct snd_device_ops ops = {
+ .dev_free = snd_ca0106_dev_free,
+ };
+
+ *rchip = NULL;
+
+ err = pci_enable_device(pci);
+ if (err < 0)
+ return err;
+ if (pci_set_dma_mask(pci, DMA_32BIT_MASK) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) < 0) {
+ printk(KERN_ERR "error to set 32bit mask DMA\n");
+ pci_disable_device(pci);
+ return -ENXIO;
+ }
+
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ pci_disable_device(pci);
+ return -ENOMEM;
+ }
+
+ chip->card = card;
+ chip->pci = pci;
+ chip->irq = -1;
+
+ spin_lock_init(&chip->emu_lock);
+
+ chip->port = pci_resource_start(pci, 0);
+ chip->res_port = request_region(chip->port, 0x20, "snd_ca0106");
+ if (!chip->res_port) {
+ snd_ca0106_free(chip);
+ printk(KERN_ERR "cannot allocate the port\n");
+ return -EBUSY;
+ }
+
+ if (request_irq(pci->irq, snd_ca0106_interrupt,
+ IRQF_SHARED, "snd_ca0106", chip)) {
+ snd_ca0106_free(chip);
+ printk(KERN_ERR "cannot grab irq\n");
+ return -EBUSY;
+ }
+ chip->irq = pci->irq;
+
+ /* This stores the periods table. */
+ if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
+ 1024, &chip->buffer) < 0) {
+ snd_ca0106_free(chip);
+ return -ENOMEM;
+ }
+
+ pci_set_master(pci);
+ /* read serial */
+ pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
+ pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
+ printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n",
+ chip->model, pci->revision, chip->serial);
+ strcpy(card->driver, "CA0106");
+ strcpy(card->shortname, "CA0106");
+
+ for (c = ca0106_chip_details; c->serial; c++) {
+ if (subsystem[dev]) {
+ if (c->serial == subsystem[dev])
+ break;
+ } else if (c->serial == chip->serial)
+ break;
+ }
+ chip->details = c;
+ if (subsystem[dev]) {
+ printk(KERN_INFO "snd-ca0106: Sound card name=%s, "
+ "subsystem=0x%x. Forced to subsystem=0x%x\n",
+ c->name, chip->serial, subsystem[dev]);
+ }
+
+ sprintf(card->longname, "%s at 0x%lx irq %i",
+ c->name, chip->port, chip->irq);
+
+ ca0106_init_chip(chip, 0);
+
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ if (err < 0) {
snd_ca0106_free(chip);
return err;
}
static int dev;
struct snd_card *card;
struct snd_ca0106 *chip;
- int err;
+ int i, err;
if (dev >= SNDRV_CARDS)
return -ENODEV;
if (card == NULL)
return -ENOMEM;
- if ((err = snd_ca0106_create(dev, card, pci, &chip)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_ca0106_create(dev, card, pci, &chip);
+ if (err < 0)
+ goto error;
+ card->private_data = chip;
- if ((err = snd_ca0106_pcm(chip, 0, NULL)) < 0) {
- snd_card_free(card);
- return err;
- }
- if ((err = snd_ca0106_pcm(chip, 1, NULL)) < 0) {
- snd_card_free(card);
- return err;
- }
- if ((err = snd_ca0106_pcm(chip, 2, NULL)) < 0) {
- snd_card_free(card);
- return err;
- }
- if ((err = snd_ca0106_pcm(chip, 3, NULL)) < 0) {
- snd_card_free(card);
- return err;
- }
- if (chip->details->ac97 == 1) { /* The SB0410 and SB0413 do not have an AC97 chip. */
- if ((err = snd_ca0106_ac97(chip)) < 0) {
- snd_card_free(card);
- return err;
- }
+ for (i = 0; i < 4; i++) {
+ err = snd_ca0106_pcm(chip, i);
+ if (err < 0)
+ goto error;
}
- if ((err = snd_ca0106_mixer(chip)) < 0) {
- snd_card_free(card);
- return err;
+
+ if (chip->details->ac97 == 1) {
+ /* The SB0410 and SB0413 do not have an AC97 chip. */
+ err = snd_ca0106_ac97(chip);
+ if (err < 0)
+ goto error;
}
+ err = snd_ca0106_mixer(chip);
+ if (err < 0)
+ goto error;
snd_printdd("ca0106: probe for MIDI channel A ...");
- if ((err = snd_ca0106_midi(chip,CA0106_MIDI_CHAN_A)) < 0) {
- snd_card_free(card);
- snd_printdd(" failed, err=0x%x\n",err);
- return err;
- }
+ err = snd_ca0106_midi(chip, CA0106_MIDI_CHAN_A);
+ if (err < 0)
+ goto error;
snd_printdd(" done.\n");
#ifdef CONFIG_PROC_FS
snd_card_set_dev(card, &pci->dev);
- if ((err = snd_card_register(card)) < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_card_register(card);
+ if (err < 0)
+ goto error;
pci_set_drvdata(pci, card);
dev++;
return 0;
+
+ error:
+ snd_card_free(card);
+ return err;
}
static void __devexit snd_ca0106_remove(struct pci_dev *pci)
pci_set_drvdata(pci, NULL);
}
+#ifdef CONFIG_PM
+static int snd_ca0106_suspend(struct pci_dev *pci, pm_message_t state)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ca0106 *chip = card->private_data;
+ int i;
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+ for (i = 0; i < 4; i++)
+ snd_pcm_suspend_all(chip->pcm[i]);
+ if (chip->details->ac97)
+ snd_ac97_suspend(chip->ac97);
+ snd_ca0106_mixer_suspend(chip);
+
+ ca0106_stop_chip(chip);
+
+ pci_disable_device(pci);
+ pci_save_state(pci);
+ pci_set_power_state(pci, pci_choose_state(pci, state));
+ return 0;
+}
+
+static int snd_ca0106_resume(struct pci_dev *pci)
+{
+ struct snd_card *card = pci_get_drvdata(pci);
+ struct snd_ca0106 *chip = card->private_data;
+ int i;
+
+ pci_set_power_state(pci, PCI_D0);
+ pci_restore_state(pci);
+
+ if (pci_enable_device(pci) < 0) {
+ snd_card_disconnect(card);
+ return -EIO;
+ }
+
+ pci_set_master(pci);
+
+ ca0106_init_chip(chip, 1);
+
+ if (chip->details->ac97)
+ snd_ac97_resume(chip->ac97);
+ snd_ca0106_mixer_resume(chip);
+ if (chip->details->spi_dac) {
+ for (i = 0; i < ARRAY_SIZE(chip->spi_dac_reg); i++)
+ snd_ca0106_spi_write(chip, chip->spi_dac_reg[i]);
+ }
+
+ snd_power_change_state(card, SNDRV_CTL_POWER_D0);
+ return 0;
+}
+#endif
+
// PCI IDs
static struct pci_device_id snd_ca0106_ids[] = {
{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* Audigy LS or Live 24bit */
.id_table = snd_ca0106_ids,
.probe = snd_ca0106_probe,
.remove = __devexit_p(snd_ca0106_remove),
+#ifdef CONFIG_PM
+ .suspend = snd_ca0106_suspend,
+ .resume = snd_ca0106_resume,
+#endif
};
// initialization of the module
#include "ca0106.h"
+static void ca0106_spdif_enable(struct snd_ca0106 *emu)
+{
+ unsigned int val;
+
+ if (emu->spdif_enable) {
+ /* Digital */
+ snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
+ snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x0b000000);
+ val = snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) & ~0x1000;
+ snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0, val);
+ val = inl(emu->port + GPIO) & ~0x101;
+ outl(val, emu->port + GPIO);
+
+ } else {
+ /* Analog */
+ snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
+ snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x000f0000);
+ val = snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) | 0x1000;
+ snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0, val);
+ val = inl(emu->port + GPIO) | 0x101;
+ outl(val, emu->port + GPIO);
+ }
+}
+
+static void ca0106_set_capture_source(struct snd_ca0106 *emu)
+{
+ unsigned int val = emu->capture_source;
+ unsigned int source, mask;
+ source = (val << 28) | (val << 24) | (val << 20) | (val << 16);
+ mask = snd_ca0106_ptr_read(emu, CAPTURE_SOURCE, 0) & 0xffff;
+ snd_ca0106_ptr_write(emu, CAPTURE_SOURCE, 0, source | mask);
+}
+
+static void ca0106_set_i2c_capture_source(struct snd_ca0106 *emu,
+ unsigned int val, int force)
+{
+ unsigned int ngain, ogain;
+ u32 source;
+
+ snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
+ ngain = emu->i2c_capture_volume[val][0]; /* Left */
+ ogain = emu->i2c_capture_volume[emu->i2c_capture_source][0]; /* Left */
+ if (force || ngain != ogain)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ngain & 0xff);
+ ngain = emu->i2c_capture_volume[val][1]; /* Right */
+ ogain = emu->i2c_capture_volume[emu->i2c_capture_source][1]; /* Right */
+ if (force || ngain != ogain)
+ snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ngain & 0xff);
+ source = 1 << val;
+ snd_ca0106_i2c_write(emu, ADC_MUX, source); /* Set source */
+ emu->i2c_capture_source = val;
+}
+
+static void ca0106_set_capture_mic_line_in(struct snd_ca0106 *emu)
+{
+ u32 tmp;
+
+ if (emu->capture_mic_line_in) {
+ /* snd_ca0106_i2c_write(emu, ADC_MUX, 0); */ /* Mute input */
+ tmp = inl(emu->port+GPIO) & ~0x400;
+ tmp = tmp | 0x400;
+ outl(tmp, emu->port+GPIO);
+ /* snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC); */
+ } else {
+ /* snd_ca0106_i2c_write(emu, ADC_MUX, 0); */ /* Mute input */
+ tmp = inl(emu->port+GPIO) & ~0x400;
+ outl(tmp, emu->port+GPIO);
+ /* snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN); */
+ }
+}
+
+static void ca0106_set_spdif_bits(struct snd_ca0106 *emu, int idx)
+{
+ snd_ca0106_ptr_write(emu, SPCS0 + idx, 0, emu->spdif_str_bits[idx]);
+}
+
+/*
+ */
static const DECLARE_TLV_DB_SCALE(snd_ca0106_db_scale1, -5175, 25, 1);
static const DECLARE_TLV_DB_SCALE(snd_ca0106_db_scale2, -10350, 50, 1);
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
- u32 mask;
val = !!ucontrol->value.integer.value[0];
change = (emu->spdif_enable != val);
if (change) {
emu->spdif_enable = val;
- if (val) {
- /* Digital */
- snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
- snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x0b000000);
- snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0,
- snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) & ~0x1000);
- mask = inl(emu->port + GPIO) & ~0x101;
- outl(mask, emu->port + GPIO);
-
- } else {
- /* Analog */
- snd_ca0106_ptr_write(emu, SPDIF_SELECT1, 0, 0xf);
- snd_ca0106_ptr_write(emu, SPDIF_SELECT2, 0, 0x000f0000);
- snd_ca0106_ptr_write(emu, CAPTURE_CONTROL, 0,
- snd_ca0106_ptr_read(emu, CAPTURE_CONTROL, 0) | 0x1000);
- mask = inl(emu->port + GPIO) | 0x101;
- outl(mask, emu->port + GPIO);
- }
+ ca0106_spdif_enable(emu);
}
return change;
}
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
- u32 mask;
- u32 source;
val = ucontrol->value.enumerated.item[0] ;
if (val >= 6)
change = (emu->capture_source != val);
if (change) {
emu->capture_source = val;
- source = (val << 28) | (val << 24) | (val << 20) | (val << 16);
- mask = snd_ca0106_ptr_read(emu, CAPTURE_SOURCE, 0) & 0xffff;
- snd_ca0106_ptr_write(emu, CAPTURE_SOURCE, 0, source | mask);
+ ca0106_set_capture_source(emu);
}
return change;
}
{
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int source_id;
- unsigned int ngain, ogain;
int change = 0;
- u32 source;
/* If the capture source has changed,
* update the capture volume from the cached value
* for the particular source.
return -EINVAL;
change = (emu->i2c_capture_source != source_id);
if (change) {
- snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
- ngain = emu->i2c_capture_volume[source_id][0]; /* Left */
- ogain = emu->i2c_capture_volume[emu->i2c_capture_source][0]; /* Left */
- if (ngain != ogain)
- snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCL, ((ngain) & 0xff));
- ngain = emu->i2c_capture_volume[source_id][1]; /* Left */
- ogain = emu->i2c_capture_volume[emu->i2c_capture_source][1]; /* Left */
- if (ngain != ogain)
- snd_ca0106_i2c_write(emu, ADC_ATTEN_ADCR, ((ngain) & 0xff));
- source = 1 << source_id;
- snd_ca0106_i2c_write(emu, ADC_MUX, source); /* Set source */
- emu->i2c_capture_source = source_id;
+ ca0106_set_i2c_capture_source(emu, source_id, 0);
}
return change;
}
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int val;
int change = 0;
- u32 tmp;
val = ucontrol->value.enumerated.item[0] ;
if (val > 1)
change = (emu->capture_mic_line_in != val);
if (change) {
emu->capture_mic_line_in = val;
- if (val) {
- //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
- tmp = inl(emu->port+GPIO) & ~0x400;
- tmp = tmp | 0x400;
- outl(tmp, emu->port+GPIO);
- //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_MIC);
- } else {
- //snd_ca0106_i2c_write(emu, ADC_MUX, 0); /* Mute input */
- tmp = inl(emu->port+GPIO) & ~0x400;
- outl(tmp, emu->port+GPIO);
- //snd_ca0106_i2c_write(emu, ADC_MUX, ADC_MUX_LINEIN);
- }
+ ca0106_set_capture_mic_line_in(emu);
}
return change;
}
return 0;
}
-static int snd_ca0106_spdif_get(struct snd_kcontrol *kcontrol,
+static void decode_spdif_bits(unsigned char *status, unsigned int bits)
+{
+ status[0] = (bits >> 0) & 0xff;
+ status[1] = (bits >> 8) & 0xff;
+ status[2] = (bits >> 16) & 0xff;
+ status[3] = (bits >> 24) & 0xff;
+}
+
+static int snd_ca0106_spdif_get_default(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- ucontrol->value.iec958.status[0] = (emu->spdif_bits[idx] >> 0) & 0xff;
- ucontrol->value.iec958.status[1] = (emu->spdif_bits[idx] >> 8) & 0xff;
- ucontrol->value.iec958.status[2] = (emu->spdif_bits[idx] >> 16) & 0xff;
- ucontrol->value.iec958.status[3] = (emu->spdif_bits[idx] >> 24) & 0xff;
+ decode_spdif_bits(ucontrol->value.iec958.status,
+ emu->spdif_bits[idx]);
+ return 0;
+}
+
+static int snd_ca0106_spdif_get_stream(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+
+ decode_spdif_bits(ucontrol->value.iec958.status,
+ emu->spdif_str_bits[idx]);
return 0;
}
return 0;
}
-static int snd_ca0106_spdif_put(struct snd_kcontrol *kcontrol,
+static unsigned int encode_spdif_bits(unsigned char *status)
+{
+ return ((unsigned int)status[0] << 0) |
+ ((unsigned int)status[1] << 8) |
+ ((unsigned int)status[2] << 16) |
+ ((unsigned int)status[3] << 24);
+}
+
+static int snd_ca0106_spdif_put_default(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- int change;
unsigned int val;
- val = (ucontrol->value.iec958.status[0] << 0) |
- (ucontrol->value.iec958.status[1] << 8) |
- (ucontrol->value.iec958.status[2] << 16) |
- (ucontrol->value.iec958.status[3] << 24);
- change = val != emu->spdif_bits[idx];
- if (change) {
- snd_ca0106_ptr_write(emu, SPCS0 + idx, 0, val);
+ val = encode_spdif_bits(ucontrol->value.iec958.status);
+ if (val != emu->spdif_bits[idx]) {
emu->spdif_bits[idx] = val;
+ /* FIXME: this isn't safe, but needed to keep the compatibility
+ * with older alsa-lib config
+ */
+ emu->spdif_str_bits[idx] = val;
+ ca0106_set_spdif_bits(emu, idx);
+ return 1;
}
- return change;
+ return 0;
+}
+
+static int snd_ca0106_spdif_put_stream(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ca0106 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ unsigned int val;
+
+ val = encode_spdif_bits(ucontrol->value.iec958.status);
+ if (val != emu->spdif_str_bits[idx]) {
+ emu->spdif_str_bits[idx] = val;
+ ca0106_set_spdif_bits(emu, idx);
+ return 1;
+ }
+ return 0;
}
static int snd_ca0106_volume_info(struct snd_kcontrol *kcontrol,
.name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,DEFAULT),
.count = 4,
.info = snd_ca0106_spdif_info,
- .get = snd_ca0106_spdif_get,
- .put = snd_ca0106_spdif_put
+ .get = snd_ca0106_spdif_get_default,
+ .put = snd_ca0106_spdif_put_default
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .name = SNDRV_CTL_NAME_IEC958("",PLAYBACK,PCM_STREAM),
+ .count = 4,
+ .info = snd_ca0106_spdif_info,
+ .get = snd_ca0106_spdif_get_stream,
+ .put = snd_ca0106_spdif_put_stream
},
};
return 0;
}
+#ifdef CONFIG_PM
+struct ca0106_vol_tbl {
+ unsigned int channel_id;
+ unsigned int reg;
+};
+
+static struct ca0106_vol_tbl saved_volumes[NUM_SAVED_VOLUMES] = {
+ { CONTROL_FRONT_CHANNEL, PLAYBACK_VOLUME2 },
+ { CONTROL_REAR_CHANNEL, PLAYBACK_VOLUME2 },
+ { CONTROL_CENTER_LFE_CHANNEL, PLAYBACK_VOLUME2 },
+ { CONTROL_UNKNOWN_CHANNEL, PLAYBACK_VOLUME2 },
+ { CONTROL_FRONT_CHANNEL, PLAYBACK_VOLUME1 },
+ { CONTROL_REAR_CHANNEL, PLAYBACK_VOLUME1 },
+ { CONTROL_CENTER_LFE_CHANNEL, PLAYBACK_VOLUME1 },
+ { CONTROL_UNKNOWN_CHANNEL, PLAYBACK_VOLUME1 },
+ { 1, CAPTURE_CONTROL },
+};
+
+void snd_ca0106_mixer_suspend(struct snd_ca0106 *chip)
+{
+ int i;
+
+ /* save volumes */
+ for (i = 0; i < NUM_SAVED_VOLUMES; i++)
+ chip->saved_vol[i] =
+ snd_ca0106_ptr_read(chip, saved_volumes[i].reg,
+ saved_volumes[i].channel_id);
+}
+
+void snd_ca0106_mixer_resume(struct snd_ca0106 *chip)
+{
+ int i;
+
+ for (i = 0; i < NUM_SAVED_VOLUMES; i++)
+ snd_ca0106_ptr_write(chip, saved_volumes[i].reg,
+ saved_volumes[i].channel_id,
+ chip->saved_vol[i]);
+
+ ca0106_spdif_enable(chip);
+ ca0106_set_capture_source(chip);
+ ca0106_set_i2c_capture_source(chip, chip->i2c_capture_source, 1);
+ for (i = 0; i < 4; i++)
+ ca0106_set_spdif_bits(chip, i);
+ if (chip->details->i2c_adc)
+ ca0106_set_capture_mic_line_in(chip);
+}
+#endif /* CONFIG_PM */
{
struct snd_card *card = pci_get_drvdata(pci);
struct snd_cs46xx *chip = card->private_data;
- int i, amp_saved;
+ int amp_saved;
+#ifdef CONFIG_SND_CS46XX_NEW_DSP
+ int i;
+#endif
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
snd-cs5535audio-y := cs5535audio.o cs5535audio_pcm.o
snd-cs5535audio-$(CONFIG_PM) += cs5535audio_pm.o
+ifdef CONFIG_MGEODE_LX
+snd-cs5535audio-$(CONFIG_OLPC) += cs5535audio_olpc.o
+endif
# Toplevel Module Dependency
obj-$(CONFIG_SND_CS5535AUDIO) += snd-cs5535audio.o
return err;
memset(&ac97, 0, sizeof(ac97));
- ac97.scaps = AC97_SCAP_AUDIO|AC97_SCAP_SKIP_MODEM;
+ ac97.scaps = AC97_SCAP_AUDIO | AC97_SCAP_SKIP_MODEM
+ | AC97_SCAP_POWER_SAVE;
ac97.private_data = cs5535au;
ac97.pci = cs5535au->pci;
+ /* set any OLPC-specific scaps */
+ olpc_prequirks(card, &ac97);
+
if ((err = snd_ac97_mixer(pbus, &ac97, &cs5535au->ac97)) < 0) {
snd_printk(KERN_ERR "mixer failed\n");
return err;
snd_ac97_tune_hardware(cs5535au->ac97, ac97_quirks, ac97_quirk);
+ err = olpc_quirks(card, cs5535au->ac97);
+ if (err < 0) {
+ snd_printk(KERN_ERR "olpc quirks failed\n");
+ return err;
+ }
+
return 0;
}
unsigned int buf_addr, buf_bytes;
unsigned int period_bytes, periods;
u32 saved_prd;
+ int pcm_open_flag;
};
struct cs5535audio {
struct cs5535audio_dma dmas[NUM_CS5535AUDIO_DMAS];
};
+#ifdef CONFIG_PM
int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state);
int snd_cs5535audio_resume(struct pci_dev *pci);
+#endif
+
+#if defined(CONFIG_OLPC) && defined(CONFIG_MGEODE_LX)
+void __devinit olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97);
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97);
+void olpc_analog_input(struct snd_ac97 *ac97, int on);
+void olpc_mic_bias(struct snd_ac97 *ac97, int on);
+
+static inline void olpc_capture_open(struct snd_ac97 *ac97)
+{
+ /* default to Analog Input off */
+ olpc_analog_input(ac97, 0);
+ /* enable MIC Bias for recording */
+ olpc_mic_bias(ac97, 1);
+}
+
+static inline void olpc_capture_close(struct snd_ac97 *ac97)
+{
+ /* disable Analog Input */
+ olpc_analog_input(ac97, 0);
+ /* disable the MIC Bias (so the recording LED turns off) */
+ olpc_mic_bias(ac97, 0);
+}
+#else
+static inline void olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97) { }
+static inline int olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ return 0;
+}
+static inline void olpc_analog_input(struct snd_ac97 *ac97, int on) { }
+static inline void olpc_mic_bias(struct snd_ac97 *ac97, int on) { }
+static inline void olpc_capture_open(struct snd_ac97 *ac97) { }
+static inline void olpc_capture_close(struct snd_ac97 *ac97) { }
+#endif
+
int __devinit snd_cs5535audio_pcm(struct cs5535audio *cs5535audio);
#endif /* __SOUND_CS5535AUDIO_H */
--- /dev/null
+/*
+ * OLPC XO-1 additional sound features
+ *
+ * Copyright © 2006 Jaya Kumar <jayakumar.lkml@gmail.com>
+ * Copyright © 2007-2008 Andres Salomon <dilinger@debian.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/ac97_codec.h>
+
+#include <asm/olpc.h>
+#include "cs5535audio.h"
+
+/*
+ * OLPC has an additional feature on top of the regular AD1888 codec features.
+ * It has an Analog Input mode that is switched into (after disabling the
+ * High Pass Filter) via GPIO. It is supported on B2 and later models.
+ */
+void olpc_analog_input(struct snd_ac97 *ac97, int on)
+{
+ int err;
+
+ if (!machine_is_olpc())
+ return;
+
+ /* update the High Pass Filter (via AC97_AD_TEST2) */
+ err = snd_ac97_update_bits(ac97, AC97_AD_TEST2,
+ 1 << AC97_AD_HPFD_SHIFT, on << AC97_AD_HPFD_SHIFT);
+ if (err < 0) {
+ snd_printk(KERN_ERR "setting High Pass Filter - %d\n", err);
+ return;
+ }
+
+ /* set Analog Input through GPIO */
+ if (on)
+ geode_gpio_set(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+ else
+ geode_gpio_clear(OLPC_GPIO_MIC_AC, GPIO_OUTPUT_VAL);
+}
+
+/*
+ * OLPC XO-1's V_REFOUT is a mic bias enable.
+ */
+void olpc_mic_bias(struct snd_ac97 *ac97, int on)
+{
+ int err;
+
+ if (!machine_is_olpc())
+ return;
+
+ on = on ? 0 : 1;
+ err = snd_ac97_update_bits(ac97, AC97_AD_MISC,
+ 1 << AC97_AD_VREFD_SHIFT, on << AC97_AD_VREFD_SHIFT);
+ if (err < 0)
+ snd_printk(KERN_ERR "setting MIC Bias - %d\n", err);
+}
+
+static int olpc_dc_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int olpc_dc_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ v->value.integer.value[0] = geode_gpio_isset(OLPC_GPIO_MIC_AC,
+ GPIO_OUTPUT_VAL);
+ return 0;
+}
+
+static int olpc_dc_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+
+ olpc_analog_input(cs5535au->ac97, v->value.integer.value[0]);
+ return 1;
+}
+
+static int olpc_mic_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
+ uinfo->count = 1;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 1;
+ return 0;
+}
+
+static int olpc_mic_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+ struct snd_ac97 *ac97 = cs5535au->ac97;
+ int i;
+
+ i = (snd_ac97_read(ac97, AC97_AD_MISC) >> AC97_AD_VREFD_SHIFT) & 0x1;
+ v->value.integer.value[0] = i ? 0 : 1;
+ return 0;
+}
+
+static int olpc_mic_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *v)
+{
+ struct cs5535audio *cs5535au = snd_kcontrol_chip(kctl);
+
+ olpc_mic_bias(cs5535au->ac97, v->value.integer.value[0]);
+ return 1;
+}
+
+static struct snd_kcontrol_new olpc_cs5535audio_ctls[] __devinitdata = {
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "DC Mode Enable",
+ .info = olpc_dc_info,
+ .get = olpc_dc_get,
+ .put = olpc_dc_put,
+ .private_value = 0,
+},
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "MIC Bias Enable",
+ .info = olpc_mic_info,
+ .get = olpc_mic_get,
+ .put = olpc_mic_put,
+ .private_value = 0,
+},
+};
+
+void __devinit olpc_prequirks(struct snd_card *card,
+ struct snd_ac97_template *ac97)
+{
+ if (!machine_is_olpc())
+ return;
+
+ /* invert EAPD if on an OLPC B3 or higher */
+ if (olpc_board_at_least(olpc_board_pre(0xb3)))
+ ac97->scaps |= AC97_SCAP_INV_EAPD;
+}
+
+int __devinit olpc_quirks(struct snd_card *card, struct snd_ac97 *ac97)
+{
+ struct snd_ctl_elem_id elem;
+ int i, err;
+
+ if (!machine_is_olpc())
+ return 0;
+
+ /* drop the original AD1888 HPF control */
+ memset(&elem, 0, sizeof(elem));
+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strncpy(elem.name, "High Pass Filter Enable", sizeof(elem.name));
+ snd_ctl_remove_id(card, &elem);
+
+ /* drop the original V_REFOUT control */
+ memset(&elem, 0, sizeof(elem));
+ elem.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ strncpy(elem.name, "V_REFOUT Enable", sizeof(elem.name));
+ snd_ctl_remove_id(card, &elem);
+
+ /* add the OLPC-specific controls */
+ for (i = 0; i < ARRAY_SIZE(olpc_cs5535audio_ctls); i++) {
+ err = snd_ctl_add(card, snd_ctl_new1(&olpc_cs5535audio_ctls[i],
+ ac97->private_data));
+ if (err < 0)
+ return err;
+ }
+
+ /* turn off the mic by default */
+ olpc_mic_bias(ac97, 0);
+ return 0;
+}
err = cs5535audio_build_dma_packets(cs5535au, dma, substream,
params_periods(hw_params),
params_period_bytes(hw_params));
+ if (!err)
+ dma->pcm_open_flag = 1;
+
return err;
}
struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
struct cs5535audio_dma *dma = substream->runtime->private_data;
+ if (dma->pcm_open_flag) {
+ if (substream == cs5535au->playback_substream)
+ snd_ac97_update_power(cs5535au->ac97,
+ AC97_PCM_FRONT_DAC_RATE, 0);
+ else
+ snd_ac97_update_power(cs5535au->ac97,
+ AC97_PCM_LR_ADC_RATE, 0);
+ dma->pcm_open_flag = 0;
+ }
cs5535audio_clear_dma_packets(cs5535au, dma, substream);
return snd_pcm_lib_free_pages(substream);
}
if ((err = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
return err;
+ olpc_capture_open(cs5535au->ac97);
return 0;
}
static int snd_cs5535audio_capture_close(struct snd_pcm_substream *substream)
{
+ struct cs5535audio *cs5535au = snd_pcm_substream_chip(substream);
+ olpc_capture_close(cs5535au->ac97);
return 0;
}
* EMU10K1 init / done
*************************************************************************/
-void snd_emu10k1_voice_init(struct snd_emu10k1 * emu, int ch)
+void snd_emu10k1_voice_init(struct snd_emu10k1 *emu, int ch)
{
snd_emu10k1_ptr_write(emu, DCYSUSV, ch, 0);
snd_emu10k1_ptr_write(emu, IP, ch, 0);
{ 0x12, 0x32 }, /* ALC Control 3 */
{ 0x13, 0x00 }, /* Noise gate control */
{ 0x14, 0xa6 }, /* Limiter control */
- { 0x15, ADC_MUX_2 }, /* ADC Mixer control. Mic for Audigy 2 ZS Notebook */
+ { 0x15, ADC_MUX_2 }, /* ADC Mixer control. Mic for A2ZS Notebook */
};
-
+
static int snd_emu10k1_init(struct snd_emu10k1 *emu, int enable_ir, int resume)
{
unsigned int silent_page;
u32 tmp;
/* disable audio and lock cache */
- outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK | HCFG_MUTEBUTTONENABLE,
- emu->port + HCFG);
+ outl(HCFG_LOCKSOUNDCACHE | HCFG_LOCKTANKCACHE_MASK |
+ HCFG_MUTEBUTTONENABLE, emu->port + HCFG);
/* reset recording buffers */
snd_emu10k1_ptr_write(emu, MICBS, 0, ADCBS_BUFSIZE_NONE);
snd_emu10k1_ptr_write(emu, SOLEL, 0, 0);
snd_emu10k1_ptr_write(emu, SOLEH, 0, 0);
- if (emu->audigy){
+ if (emu->audigy) {
/* set SPDIF bypass mode */
snd_emu10k1_ptr_write(emu, SPBYPASS, 0, SPBYPASS_FORMAT);
/* enable rear left + rear right AC97 slots */
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Hacks for Alice3 to work independent of haP16V driver */
- //Setup SRCMulti_I2S SamplingRate
+ /* Setup SRCMulti_I2S SamplingRate */
tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
tmp &= 0xfffff1ff;
tmp |= (0x2<<9);
snd_emu10k1_ptr_write(emu, A_SPDIF_SAMPLERATE, 0, tmp);
-
+
/* Setup SRCSel (Enable Spdif,I2S SRCMulti) */
snd_emu10k1_ptr20_write(emu, SRCSel, 0, 0x14);
/* Setup SRCMulti Input Audio Enable */
if (emu->card_capabilities->ca0108_chip) { /* audigy2 Value */
/* Hacks for Alice3 to work independent of haP16V driver */
snd_printk(KERN_INFO "Audigy2 value: Special config.\n");
- //Setup SRCMulti_I2S SamplingRate
+ /* Setup SRCMulti_I2S SamplingRate */
tmp = snd_emu10k1_ptr_read(emu, A_SPDIF_SAMPLERATE, 0);
tmp &= 0xfffff1ff;
tmp |= (0x2<<9);
size = ARRAY_SIZE(i2c_adc_init);
for (n = 0; n < size; n++)
snd_emu10k1_i2c_write(emu, i2c_adc_init[n][0], i2c_adc_init[n][1]);
- for (n=0; n < 4; n++) {
- emu->i2c_capture_volume[n][0]= 0xcf;
- emu->i2c_capture_volume[n][1]= 0xcf;
+ for (n = 0; n < 4; n++) {
+ emu->i2c_capture_volume[n][0] = 0xcf;
+ emu->i2c_capture_volume[n][1] = 0xcf;
}
}
-
+
snd_emu10k1_ptr_write(emu, PTB, 0, emu->ptb_pages.addr);
snd_emu10k1_ptr_write(emu, TCB, 0, 0); /* taken from original driver */
snd_emu10k1_ptr_write(emu, TCBS, 0, 4); /* taken from original driver */
(emu->model == 0x21 && emu->revision < 6))
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE, emu->port + HCFG);
else
- // With on-chip joystick
+ /* With on-chip joystick */
outl(HCFG_LOCKTANKCACHE_MASK | HCFG_AUTOMUTE | HCFG_JOYENABLE, emu->port + HCFG);
if (enable_ir) { /* enable IR for SB Live */
outl(reg | HCFG_GPOUT1 | HCFG_GPOUT2, emu->port + HCFG);
udelay(100);
outl(reg, emu->port + HCFG);
- }
+ }
}
-
+
if (emu->card_capabilities->emu_model) {
; /* Disable all access to A_IOCFG for the emu1010 */
} else if (emu->card_capabilities->i2c_adc) {
; /* Disable A_IOCFG for Audigy 2 ZS Notebook */
} else if (emu->audigy) {
outl(inl(emu->port + A_IOCFG) & ~0x44, emu->port + A_IOCFG);
-
+
if (emu->card_capabilities->ca0151_chip) { /* audigy2 */
/* Unmute Analog now. Set GPO6 to 1 for Apollo.
* This has to be done after init ALice3 I2SOut beyond 48KHz.
outl(inl(emu->port + A_IOCFG) | 0x0080, emu->port + A_IOCFG);
}
}
-
+
#if 0
{
unsigned int tmp;
/* FIXME: the following routine disables LiveDrive-II !! */
- // TOSLink detection
+ /* TOSLink detection */
emu->tos_link = 0;
tmp = inl(emu->port + HCFG);
if (tmp & (HCFG_GPINPUT0 | HCFG_GPINPUT1)) {
snd_emu10k1_intr_enable(emu, INTE_PCIERRORENABLE);
}
-int snd_emu10k1_done(struct snd_emu10k1 * emu)
+int snd_emu10k1_done(struct snd_emu10k1 *emu)
{
int ch;
#define EC_LAST_PROMFILE_ADDR 0x2f
-#define EC_SERIALNUM_ADDR 0x30 /* First word of serial number. The
+#define EC_SERIALNUM_ADDR 0x30 /* First word of serial number. The
* can be up to 30 characters in length
* and is stored as a NULL-terminated
* ASCII string. Any unused bytes must be
#define EC_CHECKSUM_ADDR 0x3f /* Location at which checksum is stored */
-/* Most of this stuff is pretty self-evident. According to the hardware
- * dudes, we need to leave the ADCCAL bit low in order to avoid a DC
+/* Most of this stuff is pretty self-evident. According to the hardware
+ * dudes, we need to leave the ADCCAL bit low in order to avoid a DC
* offset problem. Weird.
*/
#define EC_RAW_RUN_MODE (EC_DACMUTEN | EC_ADCRSTN | EC_TRIM_MUTEN | \
* register.
*/
-static void snd_emu10k1_ecard_write(struct snd_emu10k1 * emu, unsigned int value)
+static void snd_emu10k1_ecard_write(struct snd_emu10k1 *emu, unsigned int value)
{
unsigned short count;
unsigned int data;
* channel.
*/
-static void snd_emu10k1_ecard_setadcgain(struct snd_emu10k1 * emu,
+static void snd_emu10k1_ecard_setadcgain(struct snd_emu10k1 *emu,
unsigned short gain)
{
unsigned int bit;
for (bit = (1 << 15); bit; bit >>= 1) {
unsigned int value;
-
+
value = emu->ecard_ctrl & ~(EC_TRIM_CSN | EC_TRIM_SDATA);
if (gain & bit)
snd_emu10k1_ecard_write(emu, emu->ecard_ctrl);
}
-static int snd_emu10k1_ecard_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_ecard_init(struct snd_emu10k1 *emu)
{
unsigned int hc_value;
EC_SPDIF0_SELECT(EC_DEFAULT_SPDIF0_SEL) |
EC_SPDIF1_SELECT(EC_DEFAULT_SPDIF1_SEL);
- /* Step 0: Set the codec type in the hardware control register
+ /* Step 0: Set the codec type in the hardware control register
* and enable audio output */
hc_value = inl(emu->port + HCFG);
outl(hc_value | HCFG_AUDIOENABLE | HCFG_CODECFORMAT_I2S, emu->port + HCFG);
return 0;
}
-static int snd_emu10k1_cardbus_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_cardbus_init(struct snd_emu10k1 *emu)
{
unsigned long special_port;
unsigned int value;
return 0;
}
-static int snd_emu1010_load_firmware(struct snd_emu10k1 * emu, const char * filename)
+static int snd_emu1010_load_firmware(struct snd_emu10k1 *emu, const char *filename)
{
int err;
int n, i;
unsigned long flags;
const struct firmware *fw_entry;
- if ((err = request_firmware(&fw_entry, filename, &emu->pci->dev)) != 0) {
- snd_printk(KERN_ERR "firmware: %s not found. Err=%d\n",filename, err);
+ err = request_firmware(&fw_entry, filename, &emu->pci->dev);
+ if (err != 0) {
+ snd_printk(KERN_ERR "firmware: %s not found. Err = %d\n", filename, err);
return err;
}
- snd_printk(KERN_INFO "firmware size=0x%zx\n", fw_entry->size);
+ snd_printk(KERN_INFO "firmware size = 0x%zx\n", fw_entry->size);
/* The FPGA is a Xilinx Spartan IIE XC2S50E */
/* GPIO7 -> FPGA PGMN
outl(0x80, emu->port + A_IOCFG); /* Leave bit 7 set during netlist setup. */
write_post = inl(emu->port + A_IOCFG);
udelay(100); /* Allow FPGA memory to clean */
- for(n = 0; n < fw_entry->size; n++) {
- value=fw_entry->data[n];
- for(i = 0; i < 8; i++) {
+ for (n = 0; n < fw_entry->size; n++) {
+ value = fw_entry->data[n];
+ for (i = 0; i < 8; i++) {
reg = 0x80;
if (value & 0x1)
reg = reg | 0x20;
- value = value >> 1;
+ value = value >> 1;
outl(reg, emu->port + A_IOCFG);
write_post = inl(emu->port + A_IOCFG);
outl(reg | 0x40, emu->port + A_IOCFG);
write_post = inl(emu->port + A_IOCFG);
spin_unlock_irqrestore(&emu->emu_lock, flags);
- release_firmware(fw_entry);
+ release_firmware(fw_entry);
return 0;
}
static int emu1010_firmware_thread(void *data)
{
- struct snd_emu10k1 * emu = data;
- int tmp,tmp2;
+ struct snd_emu10k1 *emu = data;
+ int tmp, tmp2;
int reg;
int err;
msleep_interruptible(1000);
if (kthread_should_stop())
break;
- snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &tmp ); /* IRQ Status */
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® ); /* OPTIONS: Which cards are attached to the EMU */
+ snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, &tmp); /* IRQ Status */
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®); /* OPTIONS: Which cards are attached to the EMU */
if (reg & EMU_HANA_OPTION_DOCK_OFFLINE) {
/* Audio Dock attached */
/* Return to Audio Dock programming mode */
snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware\n");
- snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK );
+ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, EMU_HANA_FPGA_CONFIG_AUDIODOCK);
if (emu->card_capabilities->emu_model ==
EMU_MODEL_EMU1010) {
- if ((err = snd_emu1010_load_firmware(emu, DOCK_FILENAME)) != 0) {
+ err = snd_emu1010_load_firmware(emu, DOCK_FILENAME);
+ if (err != 0)
continue;
- }
} else if (emu->card_capabilities->emu_model ==
EMU_MODEL_EMU1010B) {
- if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME);
+ if (err != 0)
continue;
- }
} else if (emu->card_capabilities->emu_model ==
EMU_MODEL_EMU1616) {
- if ((err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME)) != 0) {
+ err = snd_emu1010_load_firmware(emu, MICRO_DOCK_FILENAME);
+ if (err != 0)
continue;
- }
}
- snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0 );
- snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ® );
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS=0x%x\n",reg);
+ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0);
+ snd_emu1010_fpga_read(emu, EMU_HANA_IRQ_STATUS, ®);
+ snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_IRQ_STATUS = 0x%x\n", reg);
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
- snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID=0x%x\n",reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
+ snd_printk(KERN_INFO "emu1010: EMU_HANA+DOCK_ID = 0x%x\n", reg);
if ((reg & 0x1f) != 0x15) {
/* FPGA failed to be programmed */
- snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg=0x%x\n", reg);
+ snd_printk(KERN_INFO "emu1010: Loading Audio Dock Firmware file failed, reg = 0x%x\n", reg);
continue;
}
snd_printk(KERN_INFO "emu1010: Audio Dock Firmware loaded\n");
- snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp );
- snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2 );
- snd_printk("Audio Dock ver:%d.%d\n",tmp ,tmp2);
+ snd_emu1010_fpga_read(emu, EMU_DOCK_MAJOR_REV, &tmp);
+ snd_emu1010_fpga_read(emu, EMU_DOCK_MINOR_REV, &tmp2);
+ snd_printk("Audio Dock ver:%d.%d\n", tmp, tmp2);
/* Sync clocking between 1010 and Dock */
/* Allow DLL to settle */
msleep(10);
/* Unmute all. Default is muted after a firmware load */
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE );
+ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, EMU_UNMUTE);
}
}
snd_printk(KERN_INFO "emu1010: firmware thread stopping\n");
* 16 x 16-bit playback - snd_emu10k1_fx8010_playback_ops
* 16 x 32-bit capture - snd_emu10k1_capture_efx_ops
*/
-static int snd_emu10k1_emu1010_init(struct snd_emu10k1 * emu)
+static int snd_emu10k1_emu1010_init(struct snd_emu10k1 *emu)
{
unsigned int i;
- int tmp,tmp2;
+ int tmp, tmp2;
int reg;
int err;
const char *filename = NULL;
* Lock Tank Memory Cache,
* Mute all codecs.
*/
- outl(0x0005a004, emu->port + HCFG);
+ outl(0x0005a004, emu->port + HCFG);
/* AC97 2.1, Any 16Meg of 4Gig address, Auto-Mute, EMU32 Slave,
* Mute all codecs.
*/
outl(0x0005a000, emu->port + HCFG);
/* Disable 48Volt power to Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0);
/* ID, should read & 0x7f = 0x55. (Bit 7 is the IRQ bit) */
- snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- snd_printdd("reg1=0x%x\n",reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
+ snd_printdd("reg1 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA netlist already present so clear it */
/* Return to programming mode */
- snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0x02 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_FPGA_CONFIG, 0x02);
}
- snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
- snd_printdd("reg2=0x%x\n",reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
+ snd_printdd("reg2 = 0x%x\n", reg);
if ((reg & 0x3f) == 0x15) {
/* FPGA failed to return to programming mode */
snd_printk(KERN_INFO "emu1010: FPGA failed to return to programming mode\n");
return -ENODEV;
}
- snd_printk(KERN_INFO "emu1010: EMU_HANA_ID=0x%x\n",reg);
+ snd_printk(KERN_INFO "emu1010: EMU_HANA_ID = 0x%x\n", reg);
switch (emu->card_capabilities->emu_model) {
case EMU_MODEL_EMU1010:
filename = HANA_FILENAME;
}
/* ID, should read & 0x7f = 0x55 when FPGA programmed. */
- snd_emu1010_fpga_read(emu, EMU_HANA_ID, ® );
+ snd_emu1010_fpga_read(emu, EMU_HANA_ID, ®);
if ((reg & 0x3f) != 0x15) {
/* FPGA failed to be programmed */
- snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg=0x%x\n", reg);
+ snd_printk(KERN_INFO "emu1010: Loading Hana Firmware file failed, reg = 0x%x\n", reg);
return -ENODEV;
}
snd_printk(KERN_INFO "emu1010: Hana Firmware loaded\n");
- snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp );
- snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2 );
- snd_printk("Hana ver:%d.%d\n",tmp ,tmp2);
+ snd_emu1010_fpga_read(emu, EMU_HANA_MAJOR_REV, &tmp);
+ snd_emu1010_fpga_read(emu, EMU_HANA_MINOR_REV, &tmp2);
+ snd_printk("emu1010: Hana version: %d.%d\n", tmp, tmp2);
/* Enable 48Volt power to Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, EMU_HANA_DOCK_PWR_ON);
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® );
- snd_printk(KERN_INFO "emu1010: Card options=0x%x\n",reg);
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® );
- snd_printk(KERN_INFO "emu1010: Card options=0x%x\n",reg);
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp );
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
+ snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
+ snd_printk(KERN_INFO "emu1010: Card options = 0x%x\n", reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTICAL_TYPE, &tmp);
/* Optical -> ADAT I/O */
/* 0 : SPDIF
* 1 : ADAT
tmp = 0;
tmp = (emu->emu1010.optical_in ? EMU_HANA_OPTICAL_IN_ADAT : 0) |
(emu->emu1010.optical_out ? EMU_HANA_OPTICAL_OUT_ADAT : 0);
- snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp );
- snd_emu1010_fpga_read(emu, EMU_HANA_ADC_PADS, &tmp );
+ snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, tmp);
+ snd_emu1010_fpga_read(emu, EMU_HANA_ADC_PADS, &tmp);
/* Set no attenuation on Audio Dock pads. */
- snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, 0x00 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_ADC_PADS, 0x00);
emu->emu1010.adc_pads = 0x00;
- snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp );
+ snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp);
/* Unmute Audio dock DACs, Headphone source DAC-4. */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30 );
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12 );
- snd_emu1010_fpga_read(emu, EMU_HANA_DAC_PADS, &tmp );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30);
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12);
+ snd_emu1010_fpga_read(emu, EMU_HANA_DAC_PADS, &tmp);
/* DAC PADs. */
- snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, 0x0f );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DAC_PADS, 0x0f);
emu->emu1010.dac_pads = 0x0f;
- snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp );
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30 );
- snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp );
+ snd_emu1010_fpga_read(emu, EMU_HANA_DOCK_MISC, &tmp);
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_MISC, 0x30);
+ snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp);
/* SPDIF Format. Set Consumer mode, 24bit, copy enable */
- snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10);
/* MIDI routing */
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19);
/* Unknown. */
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c );
- /* snd_emu1010_fpga_write(emu, 0x09, 0x0f ); // IRQ Enable: All on */
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c);
+ /* IRQ Enable: Alll on */
+ /* snd_emu1010_fpga_write(emu, 0x09, 0x0f ); */
/* IRQ Enable: All off */
- snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_IRQ_ENABLE, 0x00);
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ® );
- snd_printk(KERN_INFO "emu1010: Card options3=0x%x\n",reg);
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, ®);
+ snd_printk(KERN_INFO "emu1010: Card options3 = 0x%x\n", reg);
/* Default WCLK set to 48kHz. */
- snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x00);
/* Word Clock source, Internal 48kHz x1 */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K );
- //snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X );
+ snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K);
+ /* snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X); */
/* Audio Dock LEDs. */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12);
#if 0
/* For 96kHz */
* Defaults only, users will set their own values anyways, let's
* just copy/paste.
*/
-
+
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_ALICE2_EMU32_8, EMU_SRC_DOCK_MIC_A1);
snd_emu1010_fpga_link_dst_src_write(emu,
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_ALICE2_EMU32_F, EMU_SRC_HAMOA_ADC_LEFT2);
#endif
- for (i = 0;i < 0x20; i++ ) {
- /* AudioDock Elink <- Silence */
- snd_emu1010_fpga_link_dst_src_write(emu, 0x0100+i, EMU_SRC_SILENCE);
+ for (i = 0; i < 0x20; i++) {
+ /* AudioDock Elink <- Silence */
+ snd_emu1010_fpga_link_dst_src_write(emu, 0x0100 + i, EMU_SRC_SILENCE);
}
- for (i = 0;i < 4; i++) {
+ for (i = 0; i < 4; i++) {
/* Hana SPDIF Out <- Silence */
- snd_emu1010_fpga_link_dst_src_write(emu, 0x0200+i, EMU_SRC_SILENCE);
+ snd_emu1010_fpga_link_dst_src_write(emu, 0x0200 + i, EMU_SRC_SILENCE);
}
- for (i = 0;i < 7; i++) {
+ for (i = 0; i < 7; i++) {
/* Hamoa DAC <- Silence */
- snd_emu1010_fpga_link_dst_src_write(emu, 0x0300+i, EMU_SRC_SILENCE);
+ snd_emu1010_fpga_link_dst_src_write(emu, 0x0300 + i, EMU_SRC_SILENCE);
}
- for (i = 0;i < 7; i++) {
+ for (i = 0; i < 7; i++) {
/* Hana ADAT Out <- Silence */
snd_emu1010_fpga_link_dst_src_write(emu, EMU_DST_HANA_ADAT + i, EMU_SRC_SILENCE);
}
EMU_DST_ALICE_I2S2_LEFT, EMU_SRC_DOCK_ADC3_LEFT1);
snd_emu1010_fpga_link_dst_src_write(emu,
EMU_DST_ALICE_I2S2_RIGHT, EMU_SRC_DOCK_ADC3_RIGHT1);
- snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x01 ); // Unmute all
+ snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x01); /* Unmute all */
+
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp);
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp );
-
/* AC97 1.03, Any 32Meg of 2Gig address, Auto-Mute, EMU32 Slave,
* Lock Sound Memory Cache, Lock Tank Memory Cache,
* Mute all codecs.
*/
- outl(0x0000a000, emu->port + HCFG);
+ outl(0x0000a000, emu->port + HCFG);
/* AC97 1.03, Any 32Meg of 2Gig address, Auto-Mute, EMU32 Slave,
* Lock Sound Memory Cache, Lock Tank Memory Cache,
* Un-Mute all codecs.
*/
outl(0x0000a001, emu->port + HCFG);
-
+
/* Initial boot complete. Now patches */
- snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp );
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 ); /* MIDI Route */
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c ); /* Unknown */
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19 ); /* MIDI Route */
- snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c ); /* Unknown */
- snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp );
- snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10 ); /* SPDIF Format spdif (or 0x11 for aes/ebu) */
+ snd_emu1010_fpga_read(emu, EMU_HANA_OPTION_CARDS, &tmp);
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19); /* MIDI Route */
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c); /* Unknown */
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_IN, 0x19); /* MIDI Route */
+ snd_emu1010_fpga_write(emu, EMU_HANA_MIDI_OUT, 0x0c); /* Unknown */
+ snd_emu1010_fpga_read(emu, EMU_HANA_SPDIF_MODE, &tmp);
+ snd_emu1010_fpga_write(emu, EMU_HANA_SPDIF_MODE, 0x10); /* SPDIF Format spdif (or 0x11 for aes/ebu) */
/* Start Micro/Audio Dock firmware loader thread */
if (!emu->emu1010.firmware_thread) {
emu->emu1010.output_source[23] = 28;
}
/* TEMP: Select SPDIF in/out */
- //snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x0); /* Output spdif */
+ /* snd_emu1010_fpga_write(emu, EMU_HANA_OPTICAL_TYPE, 0x0); */ /* Output spdif */
/* TEMP: Select 48kHz SPDIF out */
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x0); /* Mute all */
snd_emu1010_fpga_write(emu, EMU_HANA_DEFCLOCK, 0x0); /* Default fallback clock 48kHz */
/* Word Clock source, Internal 48kHz x1 */
- snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K );
- //snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X );
+ snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K);
+ /* snd_emu1010_fpga_write(emu, EMU_HANA_WCLOCK, EMU_HANA_WCLOCK_INT_48K | EMU_HANA_WCLOCK_4X); */
emu->emu1010.internal_clock = 1; /* 48000 */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12);/* Set LEDs on Audio Dock */
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_LEDS_2, 0x12); /* Set LEDs on Audio Dock */
snd_emu1010_fpga_write(emu, EMU_HANA_UNMUTE, 0x1); /* Unmute all */
- //snd_emu1010_fpga_write(emu, 0x7, 0x0); /* Mute all */
- //snd_emu1010_fpga_write(emu, 0x7, 0x1); /* Unmute all */
- //snd_emu1010_fpga_write(emu, 0xe, 0x12); /* Set LEDs on Audio Dock */
+ /* snd_emu1010_fpga_write(emu, 0x7, 0x0); */ /* Mute all */
+ /* snd_emu1010_fpga_write(emu, 0x7, 0x1); */ /* Unmute all */
+ /* snd_emu1010_fpga_write(emu, 0xe, 0x12); */ /* Set LEDs on Audio Dock */
return 0;
}
static int snd_emu10k1_free(struct snd_emu10k1 *emu)
{
if (emu->port) { /* avoid access to already used hardware */
- snd_emu10k1_fx8010_tram_setup(emu, 0);
+ snd_emu10k1_fx8010_tram_setup(emu, 0);
snd_emu10k1_done(emu);
snd_emu10k1_free_efx(emu);
- }
+ }
if (emu->card_capabilities->emu_model == EMU_MODEL_EMU1010) {
/* Disable 48Volt power to Audio Dock */
- snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0 );
+ snd_emu1010_fpga_write(emu, EMU_HANA_DOCK_PWR, 0);
}
if (emu->emu1010.firmware_thread)
kthread_stop(emu->emu1010.firmware_thread);
#endif
if (emu->port)
pci_release_regions(emu->pci);
- if (emu->card_capabilities->ca0151_chip) /* P16V */
+ if (emu->card_capabilities->ca0151_chip) /* P16V */
snd_p16v_free(emu);
pci_disable_device(emu->pci);
kfree(emu);
}
static struct snd_emu_chip_details emu_chip_details[] = {
- /* Audigy 2 Value AC3 out does not work yet. Need to find out how to turn off interpolators.*/
- /* Tested by James@superbug.co.uk 3rd July 2005 */
- /* DSP: CA0108-IAT
- * DAC: CS4382-KQ
- * ADC: Philips 1361T
- * AC97: STAC9750
- * CA0151: None
- */
- {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
- .driver = "Audigy2", .name = "Audigy 2 Value [SB0400]",
- .id = "Audigy2",
- .emu10k2_chip = 1,
- .ca0108_chip = 1,
- .spk71 = 1,
- .ac97_chip = 1} ,
/* Audigy4 (Not PRO) SB0610 */
/* Tested by James@superbug.co.uk 4th April 2006 */
/* A_IOCFG bits
* CA0151: None
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10211102,
- .driver = "Audigy2", .name = "Audigy 4 [SB0610]",
+ .driver = "Audigy2", .name = "SB Audigy 4 [SB0610]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
+ /* Audigy 2 Value AC3 out does not work yet.
+ * Need to find out how to turn off interpolators.
+ */
+ /* Tested by James@superbug.co.uk 3rd July 2005 */
+ /* DSP: CA0108-IAT
+ * DAC: CS4382-KQ
+ * ADC: Philips 1361T
+ * AC97: STAC9750
+ * CA0151: None
+ */
+ {.vendor = 0x1102, .device = 0x0008, .subsystem = 0x10011102,
+ .driver = "Audigy2", .name = "SB Audigy 2 Value [SB0400]",
+ .id = "Audigy2",
+ .emu10k2_chip = 1,
+ .ca0108_chip = 1,
+ .spk71 = 1,
+ .ac97_chip = 1} ,
/* Audigy 2 ZS Notebook Cardbus card.*/
/* Tested by James@superbug.co.uk 6th November 2006 */
/* Audio output 7.1/Headphones working.
* Digital output working. (AC3 not checked, only PCM)
* Audio Mic/Line inputs working.
* Digital input not tested.
- */
+ */
/* DSP: Tina2
* DAC: Wolfson WM8768/WM8568
* ADC: Wolfson WM8775
*
*/
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x20011102,
- .driver = "Audigy2", .name = "Audigy 2 ZS Notebook [SB0530]",
+ .driver = "Audigy2", .name = "SB Audigy 2 ZS Notebook [SB0530]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1} ,
/* Tested by James@superbug.co.uk 4th Nov 2007. */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x42011102,
- .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]",
+ .driver = "Audigy2", .name = "E-mu 1010 Notebook [MAEM8950]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1 ,
.emu_model = EMU_MODEL_EMU1616},
/* Tested by James@superbug.co.uk 4th Nov 2007. */
+ /* This is MAEM8960, 0202 is MAEM 8980 */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40041102,
- .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM????]",
+ .driver = "Audigy2", .name = "E-mu 1010b PCI [MAEM8960]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
- .emu_model = EMU_MODEL_EMU1010B},
+ .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
/* Tested by James@superbug.co.uk 8th July 2005. */
+ /* This is MAEM8810, 0202 is MAEM8820 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,
- .driver = "Audigy2", .name = "E-mu 1010 [4001]",
+ .driver = "Audigy2", .name = "E-mu 1010 [MAEM8810]",
.id = "EMU1010",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk71 = 1,
- .emu_model = EMU_MODEL_EMU1010}, /* Emu 1010 */
+ .emu_model = EMU_MODEL_EMU1010}, /* EMU 1010 old revision */
/* EMU0404b */
{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40021102,
- .driver = "Audigy2", .name = "E-mu 0404b [4002]",
+ .driver = "Audigy2", .name = "E-mu 0404b PCI [MAEM8852]",
.id = "EMU0404",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.spk71 = 1,
- .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
+ .emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 new revision */
/* Tested by James@superbug.co.uk 20-3-2007. */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40021102,
- .driver = "Audigy2", .name = "E-mu 0404 [4002]",
+ .driver = "Audigy2", .name = "E-mu 0404 [MAEM8850]",
.id = "EMU0404",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spk71 = 1,
.emu_model = EMU_MODEL_EMU0404}, /* EMU 0404 */
- /* Audigy4 (Not PRO) SB0610 */
- {.vendor = 0x1102, .device = 0x0008,
- .driver = "Audigy2", .name = "Audigy 2 Value [Unknown]",
+ /* Note that all E-mu cards require kernel 2.6 or newer. */
+ {.vendor = 0x1102, .device = 0x0008,
+ .driver = "Audigy2", .name = "SB Audigy 2 Value [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0108_chip = 1,
.ac97_chip = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20071102,
- .driver = "Audigy2", .name = "Audigy 4 PRO [SB0380]",
+ .driver = "Audigy2", .name = "SB Audigy 4 PRO [SB0380]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
* Just like 0x20021102
*/
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20061102,
- .driver = "Audigy2", .name = "Audigy 2 [SB0350b]",
+ .driver = "Audigy2", .name = "SB Audigy 2 [SB0350b]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20021102,
- .driver = "Audigy2", .name = "Audigy 2 ZS [SB0350]",
+ .driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0350]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.invert_shared_spdif = 1, /* digital/analog switch swapped */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x20011102,
- .driver = "Audigy2", .name = "Audigy 2 ZS [2001]",
+ .driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0360]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
* CA0151: Yes
*/
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10071102,
- .driver = "Audigy2", .name = "Audigy 2 [SB0240]",
+ .driver = "Audigy2", .name = "SB Audigy 2 [SB0240]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10051102,
- .driver = "Audigy2", .name = "Audigy 2 EX [1005]",
+ .driver = "Audigy2", .name = "SB Audigy 2 Platinum EX [SB0280]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
/* Dell OEM/Creative Labs Audigy 2 ZS */
/* See ALSA bug#1365 */
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10031102,
- .driver = "Audigy2", .name = "Audigy 2 ZS [SB0353]",
+ .driver = "Audigy2", .name = "SB Audigy 2 ZS [SB0353]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x10021102,
- .driver = "Audigy2", .name = "Audigy 2 Platinum [SB0240P]",
+ .driver = "Audigy2", .name = "SB Audigy 2 Platinum [SB0240P]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.adc_1361t = 1, /* 24 bit capture instead of 16bit. Fixes ALSA bug#324 */
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .revision = 0x04,
- .driver = "Audigy2", .name = "Audigy 2 [Unknown]",
+ .driver = "Audigy2", .name = "SB Audigy 2 [Unknown]",
.id = "Audigy2",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00531102,
- .driver = "Audigy", .name = "Audigy 1 [SB0090]",
+ .driver = "Audigy", .name = "SB Audigy 1 [SB0092]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00521102,
- .driver = "Audigy", .name = "Audigy 1 ES [SB0160]",
+ .driver = "Audigy", .name = "SB Audigy 1 ES [SB0160]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.spdif_bug = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x00511102,
- .driver = "Audigy", .name = "Audigy 1 [SB0090]",
+ .driver = "Audigy", .name = "SB Audigy 1 [SB0090]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0004,
- .driver = "Audigy", .name = "Audigy 1 [Unknown]",
+ .driver = "Audigy", .name = "Audigy 1 [Unknown]",
.id = "Audigy",
.emu10k2_chip = 1,
.ca0102_chip = 1,
.ac97_chip = 1} ,
- {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806B1102,
- .driver = "EMU10K1", .name = "SBLive! [SB0105]",
+ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x100a1102,
+ .driver = "EMU10K1", .name = "SB Live! 5.1 [SB0220]",
+ .id = "Live",
+ .emu10k1_chip = 1,
+ .ac97_chip = 1,
+ .sblive51 = 1} ,
+ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806b1102,
+ .driver = "EMU10K1", .name = "SB Live! [SB0105]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
- {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806A1102,
- .driver = "EMU10K1", .name = "SBLive! Value [SB0103]",
+ {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x806a1102,
+ .driver = "EMU10K1", .name = "SB Live! Value [SB0103]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80691102,
- .driver = "EMU10K1", .name = "SBLive! Value [SB0101]",
+ .driver = "EMU10K1", .name = "SB Live! Value [SB0101]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by ALSA bug#1680 26th December 2005 */
- /* note: It really has SB0220 written on the card. */
+ /* note: It really has SB0220 written on the card, */
+ /* but it's SB0228 according to kx.inf */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80661102,
- .driver = "EMU10K1", .name = "SB Live 5.1 Dell OEM [SB0220]",
+ .driver = "EMU10K1", .name = "SB Live! 5.1 Dell OEM [SB0228]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by Thomas Zehetbauer 27th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80651102,
- .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]",
- .id = "Live",
- .emu10k1_chip = 1,
- .ac97_chip = 1,
- .sblive51 = 1} ,
- {.vendor = 0x1102, .device = 0x0002, .subsystem = 0x100a1102,
- .driver = "EMU10K1", .name = "SB Live 5.1 [SB0220]",
+ .driver = "EMU10K1", .name = "SB Live! 5.1 [SB0220]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80641102,
- .driver = "EMU10K1", .name = "SB Live 5.1",
+ .driver = "EMU10K1", .name = "SB Live! 5.1",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by alsa bugtrack user "hus" bug #1297 12th Aug 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80611102,
- .driver = "EMU10K1", .name = "SBLive 5.1 [SB0060]",
+ .driver = "EMU10K1", .name = "SB Live! 5.1 [SB0060]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 2, /* ac97 is optional; both SBLive 5.1 and platinum
*/
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80511102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4850]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4850]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80401102,
- .driver = "EMU10K1", .name = "SBLive! Platinum [CT4760P]",
+ .driver = "EMU10K1", .name = "SB Live! Platinum [CT4760P]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80321102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4871]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4871]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80311102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4831]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4831]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80281102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4870]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4870]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
/* Tested by James@superbug.co.uk 3rd July 2005 */
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80271102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4832]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4832]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80261102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4830]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4830]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80231102,
- .driver = "EMU10K1", .name = "SB PCI512 [CT4790]",
+ .driver = "EMU10K1", .name = "SB PCI512 [CT4790]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x80221102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4780]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4780]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x40011102,
- .driver = "EMU10K1", .name = "E-mu APS [4001]",
+ .driver = "EMU10K1", .name = "E-mu APS [PC545]",
.id = "APS",
.emu10k1_chip = 1,
.ecard = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00211102,
- .driver = "EMU10K1", .name = "SBLive! [CT4620]",
+ .driver = "EMU10K1", .name = "SB Live! [CT4620]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002, .subsystem = 0x00201102,
- .driver = "EMU10K1", .name = "SBLive! Value [CT4670]",
+ .driver = "EMU10K1", .name = "SB Live! Value [CT4670]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
.sblive51 = 1} ,
{.vendor = 0x1102, .device = 0x0002,
- .driver = "EMU10K1", .name = "SB Live [Unknown]",
+ .driver = "EMU10K1", .name = "SB Live! [Unknown]",
.id = "Live",
.emu10k1_chip = 1,
.ac97_chip = 1,
};
int __devinit snd_emu10k1_create(struct snd_card *card,
- struct pci_dev * pci,
+ struct pci_dev *pci,
unsigned short extin_mask,
unsigned short extout_mask,
long max_cache_bytes,
int enable_ir,
uint subsystem,
- struct snd_emu10k1 ** remu)
+ struct snd_emu10k1 **remu)
{
struct snd_emu10k1 *emu;
int idx, err;
static struct snd_device_ops ops = {
.dev_free = snd_emu10k1_dev_free,
};
-
+
*remu = NULL;
/* enable PCI device */
- if ((err = pci_enable_device(pci)) < 0)
+ err = pci_enable_device(pci);
+ if (err < 0)
return err;
emu = kzalloc(sizeof(*emu), GFP_KERNEL);
emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
- snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
+ snd_printdd("vendor = 0x%x, device = 0x%x, subsystem_vendor_id = 0x%x, subsystem_id = 0x%x\n", pci->vendor, pci->device, emu->serial, emu->model);
for (c = emu_chip_details; c->vendor; c++) {
if (c->vendor == pci->vendor && c->device == pci->device) {
if (subsystem) {
- if (c->subsystem && (c->subsystem == subsystem) ) {
+ if (c->subsystem && (c->subsystem == subsystem))
break;
- } else continue;
+ else
+ continue;
} else {
- if (c->subsystem && (c->subsystem != emu->serial) )
+ if (c->subsystem && (c->subsystem != emu->serial))
continue;
if (c->revision && c->revision != emu->revision)
continue;
}
emu->card_capabilities = c;
if (c->subsystem && !subsystem)
- snd_printdd("Sound card name=%s\n", c->name);
- else if (subsystem)
- snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x. Forced to subsytem=0x%x\n",
- c->name, pci->vendor, pci->device, emu->serial, c->subsystem);
- else
- snd_printdd("Sound card name=%s, vendor=0x%x, device=0x%x, subsystem=0x%x.\n",
- c->name, pci->vendor, pci->device, emu->serial);
-
+ snd_printdd("Sound card name = %s\n", c->name);
+ else if (subsystem)
+ snd_printdd("Sound card name = %s, "
+ "vendor = 0x%x, device = 0x%x, subsystem = 0x%x. "
+ "Forced to subsytem = 0x%x\n", c->name,
+ pci->vendor, pci->device, emu->serial, c->subsystem);
+ else
+ snd_printdd("Sound card name = %s, "
+ "vendor = 0x%x, device = 0x%x, subsystem = 0x%x.\n",
+ c->name, pci->vendor, pci->device,
+ emu->serial);
+
if (!*card->id && c->id) {
int i, n = 0;
strlcpy(card->id, c->id, sizeof(card->id));
else
emu->gpr_base = FXGPREGBASE;
- if ((err = pci_request_regions(pci, "EMU10K1")) < 0) {
+ err = pci_request_regions(pci, "EMU10K1");
+ if (err < 0) {
kfree(emu);
pci_disable_device(pci);
return err;
emu->enable_ir = enable_ir;
if (emu->card_capabilities->ca_cardbus_chip) {
- if ((err = snd_emu10k1_cardbus_init(emu)) < 0)
+ err = snd_emu10k1_cardbus_init(emu);
+ if (err < 0)
goto error;
}
if (emu->card_capabilities->ecard) {
- if ((err = snd_emu10k1_ecard_init(emu)) < 0)
+ err = snd_emu10k1_ecard_init(emu);
+ if (err < 0)
goto error;
} else if (emu->card_capabilities->emu_model) {
- if ((err = snd_emu10k1_emu1010_init(emu)) < 0) {
- snd_emu10k1_free(emu);
- return err;
- }
+ err = snd_emu10k1_emu1010_init(emu);
+ if (err < 0) {
+ snd_emu10k1_free(emu);
+ return err;
+ }
} else {
/* 5.1: Enable the additional AC97 Slots. If the emu10k1 version
does not support this, it shouldn't do any harm */
- snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
+ snd_emu10k1_ptr_write(emu, AC97SLOT, 0,
+ AC97SLOT_CNTR|AC97SLOT_LFE);
}
/* initialize TRAM setup */
snd_emu10k1_synth_alloc(emu, 4096);
if (emu->reserved_page)
emu->reserved_page->map_locked = 1;
-
+
/* Clear silent pages and set up pointers */
memset(emu->silent_page.area, 0, PAGE_SIZE);
silent_page = emu->silent_page.addr << 1;
emu->voices[idx].number = idx;
}
- if ((err = snd_emu10k1_init(emu, enable_ir, 0)) < 0)
+ err = snd_emu10k1_init(emu, enable_ir, 0);
+ if (err < 0)
goto error;
#ifdef CONFIG_PM
- if ((err = alloc_pm_buffer(emu)) < 0)
+ err = alloc_pm_buffer(emu);
+ if (err < 0)
goto error;
#endif
/* Initialize the effect engine */
- if ((err = snd_emu10k1_init_efx(emu)) < 0)
+ err = snd_emu10k1_init_efx(emu);
+ if (err < 0)
goto error;
snd_emu10k1_audio_enable(emu);
- if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, emu, &ops)) < 0)
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, emu, &ops);
+ if (err < 0)
goto error;
#ifdef CONFIG_PROC_FS
if (emu->audigy)
size += ARRAY_SIZE(saved_regs_audigy);
emu->saved_ptr = vmalloc(4 * NUM_G * size);
- if (! emu->saved_ptr)
+ if (!emu->saved_ptr)
return -ENOMEM;
if (snd_emu10k1_efx_alloc_pm_buffer(emu) < 0)
return -ENOMEM;
if (emu->card_capabilities->ecard)
snd_emu10k1_ecard_init(emu);
else if (emu->card_capabilities->emu_model)
- snd_emu10k1_emu1010_init(emu);
+ snd_emu10k1_emu1010_init(emu);
else
snd_emu10k1_ptr_write(emu, AC97SLOT, 0, AC97SLOT_CNTR|AC97SLOT_LFE);
snd_emu10k1_init(emu, emu->enable_ir, 1);
.put = snd_emu10k1_shared_spdif_put
};
+/* workaround for too low volume on Audigy due to 16bit/24bit conversion */
+
+#define snd_audigy_capture_boost_info snd_ctl_boolean_mono_info
+
+static int snd_audigy_capture_boost_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+
+ /* FIXME: better to use a cached version */
+ val = snd_ac97_read(emu->ac97, AC97_REC_GAIN);
+ ucontrol->value.integer.value[0] = !!val;
+ return 0;
+}
+
+static int snd_audigy_capture_boost_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_emu10k1 *emu = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+
+ if (ucontrol->value.integer.value[0])
+ val = 0x0f0f;
+ else
+ val = 0;
+ return snd_ac97_update(emu->ac97, AC97_REC_GAIN, val);
+}
+
+static struct snd_kcontrol_new snd_audigy_capture_boost __devinitdata =
+{
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Analog Capture Boost",
+ .info = snd_audigy_capture_boost_info,
+ .get = snd_audigy_capture_boost_get,
+ .put = snd_audigy_capture_boost_put
+};
+
+
/*
*/
static void snd_emu10k1_mixer_free_ac97(struct snd_ac97 *ac97)
}
}
+ if (emu->card_capabilities->ac97_chip && emu->audigy) {
+ err = snd_ctl_add(card, snd_ctl_new1(&snd_audigy_capture_boost,
+ emu));
+ if (err < 0)
+ return err;
+ }
+
return 0;
}
outw(inw(chip->io_port + 4) & 1, chip->io_port + 4);
if (event & ESM_HWVOL_IRQ)
- tasklet_hi_schedule(&chip->hwvol_tq); /* we'll do this later */
+ tasklet_schedule(&chip->hwvol_tq); /* we'll do this later */
/* else ack 'em all, i imagine */
outb(0xFF, chip->io_port + 0x1A);
--- /dev/null
+menuconfig SND_HDA_INTEL
+ tristate "Intel HD Audio"
+ select SND_PCM
+ select SND_VMASTER
+ select SND_JACK if INPUT=y || INPUT=SND
+ help
+ Say Y here to include support for Intel "High Definition
+ Audio" (Azalia) and its compatible devices.
+
+ This option enables the HD-audio controller. Don't forget
+ to choose the appropriate codec options below.
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-hda-intel.
+
+if SND_HDA_INTEL
+
+config SND_HDA_HWDEP
+ bool "Build hwdep interface for HD-audio driver"
+ select SND_HWDEP
+ help
+ Say Y here to build a hwdep interface for HD-audio driver.
+ This interface can be used for out-of-band communication
+ with codecs for debugging purposes.
+
+config SND_HDA_RECONFIG
+ bool "Allow dynamic codec reconfiguration (EXPERIMENTAL)"
+ depends on SND_HDA_HWDEP && EXPERIMENTAL
+ help
+ Say Y here to enable the HD-audio codec re-configuration feature.
+ This adds the sysfs interfaces to allow user to clear the whole
+ codec configuration, change the codec setup, add extra verbs,
+ and re-configure the codec dynamically.
+
+config SND_HDA_INPUT_BEEP
+ bool "Support digital beep via input layer"
+ depends on INPUT=y || INPUT=SND_HDA_INTEL
+ help
+ Say Y here to build a digital beep interface for HD-audio
+ driver. This interface is used to generate digital beeps.
+
+config SND_HDA_CODEC_REALTEK
+ bool "Build Realtek HD-audio codec support"
+ default y
+ help
+ Say Y here to include Realtek HD-audio codec support in
+ snd-hda-intel driver, such as ALC880.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-realtek.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_ANALOG
+ bool "Build Analog Device HD-audio codec support"
+ default y
+ help
+ Say Y here to include Analog Device HD-audio codec support in
+ snd-hda-intel driver, such as AD1986A.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-analog.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_SIGMATEL
+ bool "Build IDT/Sigmatel HD-audio codec support"
+ default y
+ help
+ Say Y here to include IDT (Sigmatel) HD-audio codec support in
+ snd-hda-intel driver, such as STAC9200.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-idt.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_VIA
+ bool "Build VIA HD-audio codec support"
+ default y
+ help
+ Say Y here to include VIA HD-audio codec support in
+ snd-hda-intel driver, such as VT1708.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-via.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_ATIHDMI
+ bool "Build ATI HDMI HD-audio codec support"
+ default y
+ help
+ Say Y here to include ATI HDMI HD-audio codec support in
+ snd-hda-intel driver, such as ATI RS600 HDMI.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-atihdmi.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_NVHDMI
+ bool "Build NVIDIA HDMI HD-audio codec support"
+ default y
+ help
+ Say Y here to include NVIDIA HDMI HD-audio codec support in
+ snd-hda-intel driver, such as NVIDIA MCP78 HDMI.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-nvhdmi.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_INTELHDMI
+ bool "Build INTEL HDMI HD-audio codec support"
+ default y
+ help
+ Say Y here to include INTEL HDMI HD-audio codec support in
+ snd-hda-intel driver, such as Eaglelake integrated HDMI.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-intelhdmi.
+ This module is automatically loaded at probing.
+
+config SND_HDA_ELD
+ def_bool y
+ depends on SND_HDA_CODEC_INTELHDMI
+
+config SND_HDA_CODEC_CONEXANT
+ bool "Build Conexant HD-audio codec support"
+ default y
+ help
+ Say Y here to include Conexant HD-audio codec support in
+ snd-hda-intel driver, such as CX20549.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-conexant.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_CMEDIA
+ bool "Build C-Media HD-audio codec support"
+ default y
+ help
+ Say Y here to include C-Media HD-audio codec support in
+ snd-hda-intel driver, such as CMI9880.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-cmedia.
+ This module is automatically loaded at probing.
+
+config SND_HDA_CODEC_SI3054
+ bool "Build Silicon Labs 3054 HD-modem codec support"
+ default y
+ help
+ Say Y here to include Silicon Labs 3054 HD-modem codec
+ (and compatibles) support in snd-hda-intel driver.
+
+ When the HD-audio driver is built as a module, the codec
+ support code is also built as another module,
+ snd-hda-codec-si3054.
+ This module is automatically loaded at probing.
+
+config SND_HDA_GENERIC
+ bool "Enable generic HD-audio codec parser"
+ default y
+ help
+ Say Y here to enable the generic HD-audio codec parser
+ in snd-hda-intel driver.
+
+config SND_HDA_POWER_SAVE
+ bool "Aggressive power-saving on HD-audio"
+ help
+ Say Y here to enable more aggressive power-saving mode on
+ HD-audio driver. The power-saving timeout can be configured
+ via power_save option or over sysfs on-the-fly.
+
+config SND_HDA_POWER_SAVE_DEFAULT
+ int "Default time-out for HD-audio power-save mode"
+ depends on SND_HDA_POWER_SAVE
+ default 0
+ help
+ The default time-out value in seconds for HD-audio automatic
+ power-save mode. 0 means to disable the power-save mode.
+
+endif
-snd-hda-intel-y := hda_intel.o
-# since snd-hda-intel is the only driver using hda-codec,
-# merge it into a single module although it was originally
-# designed to be individual modules
-snd-hda-intel-y += hda_codec.o
-snd-hda-intel-$(CONFIG_PROC_FS) += hda_proc.o
-snd-hda-intel-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
-snd-hda-intel-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
-snd-hda-intel-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_REALTEK) += patch_realtek.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_CMEDIA) += patch_cmedia.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_ANALOG) += patch_analog.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_SIGMATEL) += patch_sigmatel.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_SI3054) += patch_si3054.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_ATIHDMI) += patch_atihdmi.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_CONEXANT) += patch_conexant.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_VIA) += patch_via.o
-snd-hda-intel-$(CONFIG_SND_HDA_CODEC_NVHDMI) += patch_nvhdmi.o
+snd-hda-intel-objs := hda_intel.o
+snd-hda-codec-y := hda_codec.o
+snd-hda-codec-$(CONFIG_SND_HDA_GENERIC) += hda_generic.o
+snd-hda-codec-$(CONFIG_PROC_FS) += hda_proc.o
+# snd-hda-codec-$(CONFIG_SND_HDA_ELD) += hda_eld.o
+snd-hda-codec-$(CONFIG_SND_HDA_HWDEP) += hda_hwdep.o
+snd-hda-codec-$(CONFIG_SND_HDA_INPUT_BEEP) += hda_beep.o
+
+snd-hda-codec-realtek-objs := patch_realtek.o
+snd-hda-codec-cmedia-objs := patch_cmedia.o
+snd-hda-codec-analog-objs := patch_analog.o
+snd-hda-codec-idt-objs := patch_sigmatel.o
+snd-hda-codec-si3054-objs := patch_si3054.o
+snd-hda-codec-atihdmi-objs := patch_atihdmi.o
+snd-hda-codec-conexant-objs := patch_conexant.o
+snd-hda-codec-via-objs := patch_via.o
+snd-hda-codec-nvhdmi-objs := patch_nvhdmi.o
+snd-hda-codec-intelhdmi-objs := patch_intelhdmi.o hda_eld.o
+
+# common driver
+obj-$(CONFIG_SND_HDA_INTEL) := snd-hda-codec.o
+
+# codec drivers (note: CONFIG_SND_HDA_CODEC_XXX are booleans)
+ifdef CONFIG_SND_HDA_CODEC_REALTEK
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-realtek.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_CMEDIA
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-cmedia.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_ANALOG
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-analog.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_SIGMATEL
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-idt.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_SI3054
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-si3054.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-atihdmi.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_CONEXANT
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-conexant.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_VIA
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-via.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_NVHDMI
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-nvhdmi.o
+endif
+ifdef CONFIG_SND_HDA_CODEC_INTELHDMI
+obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-codec-intelhdmi.o
+endif
+
+# this must be the last entry after codec drivers;
+# otherwise the codec patches won't be hooked before the PCI probe
+# when built in kernel
obj-$(CONFIG_SND_HDA_INTEL) += snd-hda-intel.o
INIT_WORK(&beep->beep_work, &snd_hda_generate_beep);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_attach_beep_device);
void snd_hda_detach_beep_device(struct hda_codec *codec)
{
kfree(beep);
}
}
+EXPORT_SYMBOL_HDA(snd_hda_detach_beep_device);
#include <sound/initval.h>
#include "hda_local.h"
#include <sound/hda_hwdep.h>
-#include "hda_patch.h" /* codec presets */
-
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-/* define this option here to hide as static */
-static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
-module_param(power_save, int, 0644);
-MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
- "(in second, 0 = disable).");
-#endif
/*
* vendor / preset table
{ 0x1002, "ATI" },
{ 0x1057, "Motorola" },
{ 0x1095, "Silicon Image" },
+ { 0x10de, "Nvidia" },
{ 0x10ec, "Realtek" },
{ 0x1106, "VIA" },
{ 0x111d, "IDT" },
{ 0x1854, "LG" },
{ 0x1aec, "Wolfson Microelectronics" },
{ 0x434d, "C-Media" },
+ { 0x8086, "Intel" },
{ 0x8384, "SigmaTel" },
{} /* terminator */
};
-static const struct hda_codec_preset *hda_preset_tables[] = {
-#ifdef CONFIG_SND_HDA_CODEC_REALTEK
- snd_hda_preset_realtek,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_CMEDIA
- snd_hda_preset_cmedia,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_ANALOG
- snd_hda_preset_analog,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_SIGMATEL
- snd_hda_preset_sigmatel,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_SI3054
- snd_hda_preset_si3054,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_ATIHDMI
- snd_hda_preset_atihdmi,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_CONEXANT
- snd_hda_preset_conexant,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_VIA
- snd_hda_preset_via,
-#endif
-#ifdef CONFIG_SND_HDA_CODEC_NVHDMI
- snd_hda_preset_nvhdmi,
-#endif
- NULL
-};
+static DEFINE_MUTEX(preset_mutex);
+static LIST_HEAD(hda_preset_tables);
+
+int snd_hda_add_codec_preset(struct hda_codec_preset_list *preset)
+{
+ mutex_lock(&preset_mutex);
+ list_add_tail(&preset->list, &hda_preset_tables);
+ mutex_unlock(&preset_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_add_codec_preset);
+
+int snd_hda_delete_codec_preset(struct hda_codec_preset_list *preset)
+{
+ mutex_lock(&preset_mutex);
+ list_del(&preset->list);
+ mutex_unlock(&preset_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_delete_codec_preset);
#ifdef CONFIG_SND_HDA_POWER_SAVE
static void hda_power_work(struct work_struct *work);
static inline void hda_keep_power_on(struct hda_codec *codec) {}
#endif
+const char *snd_hda_get_jack_location(u32 cfg)
+{
+ static char *bases[7] = {
+ "N/A", "Rear", "Front", "Left", "Right", "Top", "Bottom",
+ };
+ static unsigned char specials_idx[] = {
+ 0x07, 0x08,
+ 0x17, 0x18, 0x19,
+ 0x37, 0x38
+ };
+ static char *specials[] = {
+ "Rear Panel", "Drive Bar",
+ "Riser", "HDMI", "ATAPI",
+ "Mobile-In", "Mobile-Out"
+ };
+ int i;
+ cfg = (cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT;
+ if ((cfg & 0x0f) < 7)
+ return bases[cfg & 0x0f];
+ for (i = 0; i < ARRAY_SIZE(specials_idx); i++) {
+ if (cfg == specials_idx[i])
+ return specials[i];
+ }
+ return "UNKNOWN";
+}
+EXPORT_SYMBOL_HDA(snd_hda_get_jack_location);
+
+const char *snd_hda_get_jack_connectivity(u32 cfg)
+{
+ static char *jack_locations[4] = { "Ext", "Int", "Sep", "Oth" };
+
+ return jack_locations[(cfg >> (AC_DEFCFG_LOCATION_SHIFT + 4)) & 3];
+}
+EXPORT_SYMBOL_HDA(snd_hda_get_jack_connectivity);
+
+const char *snd_hda_get_jack_type(u32 cfg)
+{
+ static char *jack_types[16] = {
+ "Line Out", "Speaker", "HP Out", "CD",
+ "SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
+ "Line In", "Aux", "Mic", "Telephony",
+ "SPDIF In", "Digitial In", "Reserved", "Other"
+ };
+
+ return jack_types[(cfg & AC_DEFCFG_DEVICE)
+ >> AC_DEFCFG_DEVICE_SHIFT];
+}
+EXPORT_SYMBOL_HDA(snd_hda_get_jack_type);
+
+/*
+ * Compose a 32bit command word to be sent to the HD-audio controller
+ */
+static inline unsigned int
+make_codec_cmd(struct hda_codec *codec, hda_nid_t nid, int direct,
+ unsigned int verb, unsigned int parm)
+{
+ u32 val;
+
+ val = (u32)(codec->addr & 0x0f) << 28;
+ val |= (u32)direct << 27;
+ val |= (u32)nid << 20;
+ val |= verb << 8;
+ val |= parm;
+ return val;
+}
+
/**
* snd_hda_codec_read - send a command and get the response
* @codec: the HDA codec
int direct,
unsigned int verb, unsigned int parm)
{
+ struct hda_bus *bus = codec->bus;
unsigned int res;
+
+ res = make_codec_cmd(codec, nid, direct, verb, parm);
snd_hda_power_up(codec);
- mutex_lock(&codec->bus->cmd_mutex);
- if (!codec->bus->ops.command(codec, nid, direct, verb, parm))
- res = codec->bus->ops.get_response(codec);
+ mutex_lock(&bus->cmd_mutex);
+ if (!bus->ops.command(bus, res))
+ res = bus->ops.get_response(bus);
else
res = (unsigned int)-1;
- mutex_unlock(&codec->bus->cmd_mutex);
+ mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
return res;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_read);
/**
* snd_hda_codec_write - send a single command without waiting for response
int snd_hda_codec_write(struct hda_codec *codec, hda_nid_t nid, int direct,
unsigned int verb, unsigned int parm)
{
+ struct hda_bus *bus = codec->bus;
+ unsigned int res;
int err;
+
+ res = make_codec_cmd(codec, nid, direct, verb, parm);
snd_hda_power_up(codec);
- mutex_lock(&codec->bus->cmd_mutex);
- err = codec->bus->ops.command(codec, nid, direct, verb, parm);
- mutex_unlock(&codec->bus->cmd_mutex);
+ mutex_lock(&bus->cmd_mutex);
+ err = bus->ops.command(bus, res);
+ mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_write);
/**
* snd_hda_sequence_write - sequence writes
for (; seq->nid; seq++)
snd_hda_codec_write(codec, seq->nid, 0, seq->verb, seq->param);
}
+EXPORT_SYMBOL_HDA(snd_hda_sequence_write);
/**
* snd_hda_get_sub_nodes - get the range of sub nodes
*start_id = (parm >> 16) & 0x7fff;
return (int)(parm & 0x7fff);
}
+EXPORT_SYMBOL_HDA(snd_hda_get_sub_nodes);
/**
* snd_hda_get_connections - get connection list
}
return conns;
}
+EXPORT_SYMBOL_HDA(snd_hda_get_connections);
/**
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_queue_unsol_event);
/*
* process queued unsolicited events
/*
* initialize unsolicited queue
*/
-static int __devinit init_unsol_queue(struct hda_bus *bus)
+static int init_unsol_queue(struct hda_bus *bus)
{
struct hda_bus_unsolicited *unsol;
static int snd_hda_bus_dev_free(struct snd_device *device)
{
struct hda_bus *bus = device->device_data;
+ bus->shutdown = 1;
return snd_hda_bus_free(bus);
}
+#ifdef CONFIG_SND_HDA_HWDEP
+static int snd_hda_bus_dev_register(struct snd_device *device)
+{
+ struct hda_bus *bus = device->device_data;
+ struct hda_codec *codec;
+ list_for_each_entry(codec, &bus->codec_list, list) {
+ snd_hda_hwdep_add_sysfs(codec);
+ }
+ return 0;
+}
+#else
+#define snd_hda_bus_dev_register NULL
+#endif
+
/**
* snd_hda_bus_new - create a HDA bus
* @card: the card entry
*
* Returns 0 if successful, or a negative error code.
*/
-int __devinit snd_hda_bus_new(struct snd_card *card,
+int /*__devinit*/ snd_hda_bus_new(struct snd_card *card,
const struct hda_bus_template *temp,
struct hda_bus **busp)
{
struct hda_bus *bus;
int err;
static struct snd_device_ops dev_ops = {
+ .dev_register = snd_hda_bus_dev_register,
.dev_free = snd_hda_bus_dev_free,
};
bus->private_data = temp->private_data;
bus->pci = temp->pci;
bus->modelname = temp->modelname;
+ bus->power_save = temp->power_save;
bus->ops = temp->ops;
mutex_init(&bus->cmd_mutex);
*busp = bus;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_bus_new);
#ifdef CONFIG_SND_HDA_GENERIC
#define is_generic_config(codec) \
- (codec->bus->modelname && !strcmp(codec->bus->modelname, "generic"))
+ (codec->modelname && !strcmp(codec->modelname, "generic"))
#else
#define is_generic_config(codec) 0
#endif
+#ifdef MODULE
+#define HDA_MODREQ_MAX_COUNT 2 /* two request_modules()'s */
+#else
+#define HDA_MODREQ_MAX_COUNT 0 /* all presets are statically linked */
+#endif
+
/*
* find a matching codec preset
*/
-static const struct hda_codec_preset __devinit *
+static const struct hda_codec_preset *
find_codec_preset(struct hda_codec *codec)
{
- const struct hda_codec_preset **tbl, *preset;
+ struct hda_codec_preset_list *tbl;
+ const struct hda_codec_preset *preset;
+ int mod_requested = 0;
if (is_generic_config(codec))
return NULL; /* use the generic parser */
- for (tbl = hda_preset_tables; *tbl; tbl++) {
- for (preset = *tbl; preset->id; preset++) {
+ again:
+ mutex_lock(&preset_mutex);
+ list_for_each_entry(tbl, &hda_preset_tables, list) {
+ if (!try_module_get(tbl->owner)) {
+ snd_printk(KERN_ERR "hda_codec: cannot module_get\n");
+ continue;
+ }
+ for (preset = tbl->preset; preset->id; preset++) {
u32 mask = preset->mask;
if (preset->afg && preset->afg != codec->afg)
continue;
mask = ~0;
if (preset->id == (codec->vendor_id & mask) &&
(!preset->rev ||
- preset->rev == codec->revision_id))
+ preset->rev == codec->revision_id)) {
+ mutex_unlock(&preset_mutex);
+ codec->owner = tbl->owner;
return preset;
+ }
}
+ module_put(tbl->owner);
+ }
+ mutex_unlock(&preset_mutex);
+
+ if (mod_requested < HDA_MODREQ_MAX_COUNT) {
+ char name[32];
+ if (!mod_requested)
+ snprintf(name, sizeof(name), "snd-hda-codec-id:%08x",
+ codec->vendor_id);
+ else
+ snprintf(name, sizeof(name), "snd-hda-codec-id:%04x*",
+ (codec->vendor_id >> 16) & 0xffff);
+ request_module(name);
+ mod_requested++;
+ goto again;
}
return NULL;
}
/*
- * snd_hda_get_codec_name - store the codec name
+ * get_codec_name - store the codec name
*/
-void snd_hda_get_codec_name(struct hda_codec *codec,
- char *name, int namelen)
+static int get_codec_name(struct hda_codec *codec)
{
const struct hda_vendor_id *c;
const char *vendor = NULL;
u16 vendor_id = codec->vendor_id >> 16;
- char tmp[16];
+ char tmp[16], name[32];
for (c = hda_vendor_ids; c->id; c++) {
if (c->id == vendor_id) {
vendor = tmp;
}
if (codec->preset && codec->preset->name)
- snprintf(name, namelen, "%s %s", vendor, codec->preset->name);
+ snprintf(name, sizeof(name), "%s %s", vendor,
+ codec->preset->name);
else
- snprintf(name, namelen, "%s ID %x", vendor,
+ snprintf(name, sizeof(name), "%s ID %x", vendor,
codec->vendor_id & 0xffff);
+ codec->name = kstrdup(name, GFP_KERNEL);
+ if (!codec->name)
+ return -ENOMEM;
+ return 0;
}
/*
* look for an AFG and MFG nodes
*/
-static void __devinit setup_fg_nodes(struct hda_codec *codec)
+static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
{
int i, total_nodes;
hda_nid_t nid;
flush_scheduled_work();
#endif
list_del(&codec->list);
+ snd_array_free(&codec->mixers);
codec->bus->caddr_tbl[codec->addr] = NULL;
if (codec->patch_ops.free)
codec->patch_ops.free(codec);
+ module_put(codec->owner);
free_hda_cache(&codec->amp_cache);
free_hda_cache(&codec->cmd_cache);
+ kfree(codec->name);
+ kfree(codec->modelname);
kfree(codec->wcaps);
kfree(codec);
}
*
* Returns 0 if successful, or a negative error code.
*/
-int __devinit snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- struct hda_codec **codecp)
+int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
+ int do_init, struct hda_codec **codecp)
{
struct hda_codec *codec;
char component[31];
mutex_init(&codec->spdif_mutex);
init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
+ snd_array_init(&codec->mixers, sizeof(struct snd_kcontrol *), 32);
+ if (codec->bus->modelname) {
+ codec->modelname = kstrdup(codec->bus->modelname, GFP_KERNEL);
+ if (!codec->modelname) {
+ snd_hda_codec_free(codec);
+ return -ENODEV;
+ }
+ }
#ifdef CONFIG_SND_HDA_POWER_SAVE
INIT_DELAYED_WORK(&codec->power_work, hda_power_work);
snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_SUBSYSTEM_ID, 0);
}
+ if (bus->modelname)
+ codec->modelname = kstrdup(bus->modelname, GFP_KERNEL);
+
+ if (do_init) {
+ err = snd_hda_codec_configure(codec);
+ if (err < 0) {
+ snd_hda_codec_free(codec);
+ return err;
+ }
+ }
+ snd_hda_codec_proc_new(codec);
+
+ snd_hda_create_hwdep(codec);
+
+ sprintf(component, "HDA:%08x,%08x,%08x", codec->vendor_id,
+ codec->subsystem_id, codec->revision_id);
+ snd_component_add(codec->bus->card, component);
+
+ if (codecp)
+ *codecp = codec;
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_codec_new);
+
+int snd_hda_codec_configure(struct hda_codec *codec)
+{
+ int err;
codec->preset = find_codec_preset(codec);
+ if (!codec->name) {
+ err = get_codec_name(codec);
+ if (err < 0)
+ return err;
+ }
/* audio codec should override the mixer name */
- if (codec->afg || !*bus->card->mixername)
- snd_hda_get_codec_name(codec, bus->card->mixername,
- sizeof(bus->card->mixername));
+ if (codec->afg || !*codec->bus->card->mixername)
+ strlcpy(codec->bus->card->mixername, codec->name,
+ sizeof(codec->bus->card->mixername));
if (is_generic_config(codec)) {
err = snd_hda_parse_generic_codec(codec);
printk(KERN_ERR "hda-codec: No codec parser is available\n");
patched:
- if (err < 0) {
- snd_hda_codec_free(codec);
- return err;
- }
-
- if (codec->patch_ops.unsol_event)
- init_unsol_queue(bus);
-
- snd_hda_codec_proc_new(codec);
-#ifdef CONFIG_SND_HDA_HWDEP
- snd_hda_create_hwdep(codec);
-#endif
-
- sprintf(component, "HDA:%08x,%08x,%08x", codec->vendor_id, codec->subsystem_id, codec->revision_id);
- snd_component_add(codec->bus->card, component);
-
- if (codecp)
- *codecp = codec;
- return 0;
+ if (!err && codec->patch_ops.unsol_event)
+ err = init_unsol_queue(codec->bus);
+ return err;
}
/**
msleep(1);
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, format);
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_setup_stream);
void snd_hda_codec_cleanup_stream(struct hda_codec *codec, hda_nid_t nid)
{
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_STREAM_FORMAT, 0);
#endif
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_cleanup_stream);
/*
* amp access functions
#define INFO_AMP_VOL(ch) (1 << (1 + (ch)))
/* initialize the hash table */
-static void __devinit init_hda_cache(struct hda_cache_rec *cache,
+static void /*__devinit*/ init_hda_cache(struct hda_cache_rec *cache,
unsigned int record_size)
{
memset(cache, 0, sizeof(*cache));
memset(cache->hash, 0xff, sizeof(cache->hash));
- cache->record_size = record_size;
+ snd_array_init(&cache->buf, record_size, 64);
}
static void free_hda_cache(struct hda_cache_rec *cache)
{
- kfree(cache->buffer);
+ snd_array_free(&cache->buf);
}
/* query the hash. allocate an entry if not found. */
struct hda_cache_head *info;
while (cur != 0xffff) {
- info = (struct hda_cache_head *)(cache->buffer +
- cur * cache->record_size);
+ info = snd_array_elem(&cache->buf, cur);
if (info->key == key)
return info;
cur = info->next;
}
/* add a new hash entry */
- if (cache->num_entries >= cache->size) {
- /* reallocate the array */
- unsigned int new_size = cache->size + 64;
- void *new_buffer;
- new_buffer = kcalloc(new_size, cache->record_size, GFP_KERNEL);
- if (!new_buffer) {
- snd_printk(KERN_ERR "hda_codec: "
- "can't malloc amp_info\n");
- return NULL;
- }
- if (cache->buffer) {
- memcpy(new_buffer, cache->buffer,
- cache->size * cache->record_size);
- kfree(cache->buffer);
- }
- cache->size = new_size;
- cache->buffer = new_buffer;
- }
- cur = cache->num_entries++;
- info = (struct hda_cache_head *)(cache->buffer +
- cur * cache->record_size);
+ info = snd_array_new(&cache->buf);
+ if (!info)
+ return NULL;
+ cur = snd_array_index(&cache->buf, info);
info->key = key;
info->val = 0;
info->next = cache->hash[idx];
}
return info->amp_caps;
}
+EXPORT_SYMBOL_HDA(query_amp_caps);
int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
unsigned int caps)
info->head.val |= INFO_AMP_CAPS;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_override_amp_caps);
/*
* read the current volume to info
return 0;
return get_vol_mute(codec, info, nid, ch, direction, index);
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_amp_read);
/*
* update the AMP value, mask = bit mask to set, val = the value
put_vol_mute(codec, info, nid, ch, direction, idx, val);
return 1;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_amp_update);
/*
* update the AMP stereo with the same mask and value
idx, mask, val);
return ret;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_amp_stereo);
#ifdef SND_HDA_NEEDS_RESUME
/* resume the all amp commands from the cache */
void snd_hda_codec_resume_amp(struct hda_codec *codec)
{
- struct hda_amp_info *buffer = codec->amp_cache.buffer;
+ struct hda_amp_info *buffer = codec->amp_cache.buf.list;
int i;
- for (i = 0; i < codec->amp_cache.size; i++, buffer++) {
+ for (i = 0; i < codec->amp_cache.buf.used; i++, buffer++) {
u32 key = buffer->head.key;
hda_nid_t nid;
unsigned int idx, dir, ch;
}
}
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_resume_amp);
#endif /* SND_HDA_NEEDS_RESUME */
/* volume */
uinfo->value.integer.max = caps;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_info);
int snd_hda_mixer_amp_volume_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
& HDA_AMP_VOLMASK;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_get);
int snd_hda_mixer_amp_volume_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
snd_hda_power_down(codec);
return change;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_volume_put);
int snd_hda_mixer_amp_tlv(struct snd_kcontrol *kcontrol, int op_flag,
unsigned int size, unsigned int __user *_tlv)
return -EFAULT;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_tlv);
/*
* set (static) TLV for virtual master volume; recalculated as max 0dB
tlv[2] = -nums * step;
tlv[3] = step;
}
+EXPORT_SYMBOL_HDA(snd_hda_set_vmaster_tlv);
/* find a mixer control element with the given name */
static struct snd_kcontrol *
{
return _snd_hda_find_mixer_ctl(codec, name, 0);
}
+EXPORT_SYMBOL_HDA(snd_hda_find_mixer_ctl);
+
+/* Add a control element and assign to the codec */
+int snd_hda_ctl_add(struct hda_codec *codec, struct snd_kcontrol *kctl)
+{
+ int err;
+ struct snd_kcontrol **knewp;
+
+ err = snd_ctl_add(codec->bus->card, kctl);
+ if (err < 0)
+ return err;
+ knewp = snd_array_new(&codec->mixers);
+ if (!knewp)
+ return -ENOMEM;
+ *knewp = kctl;
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_ctl_add);
+
+#ifdef CONFIG_SND_HDA_RECONFIG
+/* Clear all controls assigned to the given codec */
+void snd_hda_ctls_clear(struct hda_codec *codec)
+{
+ int i;
+ struct snd_kcontrol **kctls = codec->mixers.list;
+ for (i = 0; i < codec->mixers.used; i++)
+ snd_ctl_remove(codec->bus->card, kctls[i]);
+ snd_array_free(&codec->mixers);
+}
+
+void snd_hda_codec_reset(struct hda_codec *codec)
+{
+ int i;
+
+#ifdef CONFIG_SND_HDA_POWER_SAVE
+ cancel_delayed_work(&codec->power_work);
+ flush_scheduled_work();
+#endif
+ snd_hda_ctls_clear(codec);
+ /* relase PCMs */
+ for (i = 0; i < codec->num_pcms; i++) {
+ if (codec->pcm_info[i].pcm) {
+ snd_device_free(codec->bus->card,
+ codec->pcm_info[i].pcm);
+ clear_bit(codec->pcm_info[i].device,
+ codec->bus->pcm_dev_bits);
+ }
+ }
+ if (codec->patch_ops.free)
+ codec->patch_ops.free(codec);
+ codec->proc_widget_hook = NULL;
+ codec->spec = NULL;
+ free_hda_cache(&codec->amp_cache);
+ free_hda_cache(&codec->cmd_cache);
+ init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
+ init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
+ codec->num_pcms = 0;
+ codec->pcm_info = NULL;
+ codec->preset = NULL;
+ module_put(codec->owner);
+ codec->owner = NULL;
+}
+#endif /* CONFIG_SND_HDA_RECONFIG */
/* create a virtual master control and add slaves */
int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
kctl = snd_ctl_make_virtual_master(name, tlv);
if (!kctl)
return -ENOMEM;
- err = snd_ctl_add(codec->bus->card, kctl);
+ err = snd_hda_ctl_add(codec, kctl);
if (err < 0)
return err;
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_add_vmaster);
/* switch */
int snd_hda_mixer_amp_switch_info(struct snd_kcontrol *kcontrol,
uinfo->value.integer.max = 1;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_info);
int snd_hda_mixer_amp_switch_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
HDA_AMP_MUTE) ? 0 : 1;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_get);
int snd_hda_mixer_amp_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
snd_hda_power_down(codec);
return change;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_amp_switch_put);
/*
* bound volume controls
mutex_unlock(&codec->spdif_mutex);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_get);
int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
mutex_unlock(&codec->spdif_mutex);
return err < 0 ? err : change;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_put);
/*
* generic bound volume/swtich controls
mutex_unlock(&codec->spdif_mutex);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_info);
int snd_hda_mixer_bind_ctls_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
mutex_unlock(&codec->spdif_mutex);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_get);
int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
mutex_unlock(&codec->spdif_mutex);
return err < 0 ? err : change;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_put);
int snd_hda_mixer_bind_tlv(struct snd_kcontrol *kcontrol, int op_flag,
unsigned int size, unsigned int __user *tlv)
mutex_unlock(&codec->spdif_mutex);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_tlv);
struct hda_ctl_ops snd_hda_bind_vol = {
.info = snd_hda_mixer_amp_volume_info,
.put = snd_hda_mixer_amp_volume_put,
.tlv = snd_hda_mixer_amp_tlv
};
+EXPORT_SYMBOL_HDA(snd_hda_bind_vol);
struct hda_ctl_ops snd_hda_bind_sw = {
.info = snd_hda_mixer_amp_switch_info,
.put = snd_hda_mixer_amp_switch_put,
.tlv = snd_hda_mixer_amp_tlv
};
+EXPORT_SYMBOL_HDA(snd_hda_bind_sw);
/*
* SPDIF out controls
{
hda_nid_t *d;
- snd_hda_codec_write(codec, nid, 0, verb, val);
+ snd_hda_codec_write_cache(codec, nid, 0, verb, val);
d = codec->slave_dig_outs;
if (!d)
return;
for (; *d; d++)
- snd_hda_codec_write(codec, *d, 0, verb, val);
+ snd_hda_codec_write_cache(codec, *d, 0, verb, val);
}
static inline void set_dig_out_convert(struct hda_codec *codec, hda_nid_t nid,
}
for (dig_mix = dig_mixes; dig_mix->name; dig_mix++) {
kctl = snd_ctl_new1(dig_mix, codec);
+ if (!kctl)
+ return -ENOMEM;
kctl->id.index = idx;
kctl->private_value = nid;
- err = snd_ctl_add(codec->bus->card, kctl);
+ err = snd_hda_ctl_add(codec, kctl);
if (err < 0)
return err;
}
codec->spdif_status = convert_to_spdif_status(codec->spdif_ctls);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_create_spdif_out_ctls);
/*
* SPDIF sharing with analog output
if (!mout->dig_out_nid)
return 0;
/* ATTENTION: here mout is passed as private_data, instead of codec */
- return snd_ctl_add(codec->bus->card,
+ return snd_hda_ctl_add(codec,
snd_ctl_new1(&spdif_share_sw, mout));
}
+EXPORT_SYMBOL_HDA(snd_hda_create_spdif_share_sw);
/*
* SPDIF input
for (dig_mix = dig_in_ctls; dig_mix->name; dig_mix++) {
kctl = snd_ctl_new1(dig_mix, codec);
kctl->private_value = nid;
- err = snd_ctl_add(codec->bus->card, kctl);
+ err = snd_hda_ctl_add(codec, kctl);
if (err < 0)
return err;
}
AC_DIG1_ENABLE;
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_create_spdif_in_ctls);
#ifdef SND_HDA_NEEDS_RESUME
/*
int snd_hda_codec_write_cache(struct hda_codec *codec, hda_nid_t nid,
int direct, unsigned int verb, unsigned int parm)
{
+ struct hda_bus *bus = codec->bus;
+ unsigned int res;
int err;
+
+ res = make_codec_cmd(codec, nid, direct, verb, parm);
snd_hda_power_up(codec);
- mutex_lock(&codec->bus->cmd_mutex);
- err = codec->bus->ops.command(codec, nid, direct, verb, parm);
+ mutex_lock(&bus->cmd_mutex);
+ err = bus->ops.command(bus, res);
if (!err) {
struct hda_cache_head *c;
u32 key = build_cmd_cache_key(nid, verb);
if (c)
c->val = parm;
}
- mutex_unlock(&codec->bus->cmd_mutex);
+ mutex_unlock(&bus->cmd_mutex);
snd_hda_power_down(codec);
return err;
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_write_cache);
/* resume the all commands from the cache */
void snd_hda_codec_resume_cache(struct hda_codec *codec)
{
- struct hda_cache_head *buffer = codec->cmd_cache.buffer;
+ struct hda_cache_head *buffer = codec->cmd_cache.buf.list;
int i;
- for (i = 0; i < codec->cmd_cache.size; i++, buffer++) {
+ for (i = 0; i < codec->cmd_cache.buf.used; i++, buffer++) {
u32 key = buffer->key;
if (!key)
continue;
get_cmd_cache_cmd(key), buffer->val);
}
}
+EXPORT_SYMBOL_HDA(snd_hda_codec_resume_cache);
/**
* snd_hda_sequence_write_cache - sequence writes with caching
snd_hda_codec_write_cache(codec, seq->nid, 0, seq->verb,
seq->param);
}
+EXPORT_SYMBOL_HDA(snd_hda_sequence_write_cache);
#endif /* SND_HDA_NEEDS_RESUME */
/*
}
}
+#ifdef CONFIG_SND_HDA_HWDEP
+/* execute additional init verbs */
+static void hda_exec_init_verbs(struct hda_codec *codec)
+{
+ if (codec->init_verbs.list)
+ snd_hda_sequence_write(codec, codec->init_verbs.list);
+}
+#else
+static inline void hda_exec_init_verbs(struct hda_codec *codec) {}
+#endif
+
#ifdef SND_HDA_NEEDS_RESUME
/*
* call suspend and power-down; used both from PM and power-save
hda_set_power_state(codec,
codec->afg ? codec->afg : codec->mfg,
AC_PWRST_D0);
+ hda_exec_init_verbs(codec);
if (codec->patch_ops.resume)
codec->patch_ops.resume(codec);
else {
*
* Returns 0 if successful, otherwise a negative error code.
*/
-int __devinit snd_hda_build_controls(struct hda_bus *bus)
+int /*__devinit*/ snd_hda_build_controls(struct hda_bus *bus)
{
struct hda_codec *codec;
list_for_each_entry(codec, &bus->codec_list, list) {
- int err = 0;
- /* fake as if already powered-on */
- hda_keep_power_on(codec);
- /* then fire up */
- hda_set_power_state(codec,
- codec->afg ? codec->afg : codec->mfg,
- AC_PWRST_D0);
- /* continue to initialize... */
- if (codec->patch_ops.init)
- err = codec->patch_ops.init(codec);
- if (!err && codec->patch_ops.build_controls)
- err = codec->patch_ops.build_controls(codec);
- snd_hda_power_down(codec);
+ int err = snd_hda_codec_build_controls(codec);
if (err < 0)
return err;
}
+ return 0;
+}
+EXPORT_SYMBOL_HDA(snd_hda_build_controls);
+int snd_hda_codec_build_controls(struct hda_codec *codec)
+{
+ int err = 0;
+ /* fake as if already powered-on */
+ hda_keep_power_on(codec);
+ /* then fire up */
+ hda_set_power_state(codec,
+ codec->afg ? codec->afg : codec->mfg,
+ AC_PWRST_D0);
+ hda_exec_init_verbs(codec);
+ /* continue to initialize... */
+ if (codec->patch_ops.init)
+ err = codec->patch_ops.init(codec);
+ if (!err && codec->patch_ops.build_controls)
+ err = codec->patch_ops.build_controls(codec);
+ snd_hda_power_down(codec);
+ if (err < 0)
+ return err;
return 0;
}
return val;
}
+EXPORT_SYMBOL_HDA(snd_hda_calc_stream_format);
/**
* snd_hda_query_supported_pcm - query the supported PCM rates and formats
*
* Returns 0 if successful, otherwise a negative error code.
*/
-int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
+static int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
u32 *ratesp, u64 *formatsp, unsigned int *bpsp)
{
int i;
return 1;
}
+EXPORT_SYMBOL_HDA(snd_hda_is_supported_format);
/*
* PCM stuff
return 0;
}
-static int __devinit set_pcm_default_values(struct hda_codec *codec,
- struct hda_pcm_stream *info)
+static int set_pcm_default_values(struct hda_codec *codec,
+ struct hda_pcm_stream *info)
{
/* query support PCM information from the given NID */
if (info->nid && (!info->rates || !info->formats)) {
return 0;
}
+/*
+ * get the empty PCM device number to assign
+ */
+static int get_empty_pcm_device(struct hda_bus *bus, int type)
+{
+ static const char *dev_name[HDA_PCM_NTYPES] = {
+ "Audio", "SPDIF", "HDMI", "Modem"
+ };
+ /* starting device index for each PCM type */
+ static int dev_idx[HDA_PCM_NTYPES] = {
+ [HDA_PCM_TYPE_AUDIO] = 0,
+ [HDA_PCM_TYPE_SPDIF] = 1,
+ [HDA_PCM_TYPE_HDMI] = 3,
+ [HDA_PCM_TYPE_MODEM] = 6
+ };
+ /* normal audio device indices; not linear to keep compatibility */
+ static int audio_idx[4] = { 0, 2, 4, 5 };
+ int i, dev;
+
+ switch (type) {
+ case HDA_PCM_TYPE_AUDIO:
+ for (i = 0; i < ARRAY_SIZE(audio_idx); i++) {
+ dev = audio_idx[i];
+ if (!test_bit(dev, bus->pcm_dev_bits))
+ break;
+ }
+ if (i >= ARRAY_SIZE(audio_idx)) {
+ snd_printk(KERN_WARNING "Too many audio devices\n");
+ return -EAGAIN;
+ }
+ break;
+ case HDA_PCM_TYPE_SPDIF:
+ case HDA_PCM_TYPE_HDMI:
+ case HDA_PCM_TYPE_MODEM:
+ dev = dev_idx[type];
+ if (test_bit(dev, bus->pcm_dev_bits)) {
+ snd_printk(KERN_WARNING "%s already defined\n",
+ dev_name[type]);
+ return -EAGAIN;
+ }
+ break;
+ default:
+ snd_printk(KERN_WARNING "Invalid PCM type %d\n", type);
+ return -EINVAL;
+ }
+ set_bit(dev, bus->pcm_dev_bits);
+ return dev;
+}
+
+/*
+ * attach a new PCM stream
+ */
+static int snd_hda_attach_pcm(struct hda_codec *codec, struct hda_pcm *pcm)
+{
+ struct hda_bus *bus = codec->bus;
+ struct hda_pcm_stream *info;
+ int stream, err;
+
+ if (snd_BUG_ON(!pcm->name))
+ return -EINVAL;
+ for (stream = 0; stream < 2; stream++) {
+ info = &pcm->stream[stream];
+ if (info->substreams) {
+ err = set_pcm_default_values(codec, info);
+ if (err < 0)
+ return err;
+ }
+ }
+ return bus->ops.attach_pcm(bus, codec, pcm);
+}
+
+/* assign all PCMs of the given codec */
+int snd_hda_codec_build_pcms(struct hda_codec *codec)
+{
+ unsigned int pcm;
+ int err;
+
+ if (!codec->num_pcms) {
+ if (!codec->patch_ops.build_pcms)
+ return 0;
+ err = codec->patch_ops.build_pcms(codec);
+ if (err < 0)
+ return err;
+ }
+ for (pcm = 0; pcm < codec->num_pcms; pcm++) {
+ struct hda_pcm *cpcm = &codec->pcm_info[pcm];
+ int dev;
+
+ if (!cpcm->stream[0].substreams && !cpcm->stream[1].substreams)
+ return 0; /* no substreams assigned */
+
+ if (!cpcm->pcm) {
+ dev = get_empty_pcm_device(codec->bus, cpcm->pcm_type);
+ if (dev < 0)
+ return 0;
+ cpcm->device = dev;
+ err = snd_hda_attach_pcm(codec, cpcm);
+ if (err < 0)
+ return err;
+ }
+ }
+ return 0;
+}
+
/**
* snd_hda_build_pcms - build PCM information
* @bus: the BUS
struct hda_codec *codec;
list_for_each_entry(codec, &bus->codec_list, list) {
- unsigned int pcm, s;
- int err;
- if (!codec->patch_ops.build_pcms)
- continue;
- err = codec->patch_ops.build_pcms(codec);
+ int err = snd_hda_codec_build_pcms(codec);
if (err < 0)
return err;
- for (pcm = 0; pcm < codec->num_pcms; pcm++) {
- for (s = 0; s < 2; s++) {
- struct hda_pcm_stream *info;
- info = &codec->pcm_info[pcm].stream[s];
- if (!info->substreams)
- continue;
- err = set_pcm_default_values(codec, info);
- if (err < 0)
- return err;
- }
- }
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_build_pcms);
/**
* snd_hda_check_board_config - compare the current codec with the config table
int num_configs, const char **models,
const struct snd_pci_quirk *tbl)
{
- if (codec->bus->modelname && models) {
+ if (codec->modelname && models) {
int i;
for (i = 0; i < num_configs; i++) {
if (models[i] &&
- !strcmp(codec->bus->modelname, models[i])) {
+ !strcmp(codec->modelname, models[i])) {
snd_printd(KERN_INFO "hda_codec: model '%s' is "
"selected\n", models[i]);
return i;
}
return -1;
}
+EXPORT_SYMBOL_HDA(snd_hda_check_board_config);
/**
* snd_hda_add_new_ctls - create controls from the array
kctl = snd_ctl_new1(knew, codec);
if (!kctl)
return -ENOMEM;
- err = snd_ctl_add(codec->bus->card, kctl);
+ err = snd_hda_ctl_add(codec, kctl);
if (err < 0) {
if (!codec->addr)
return err;
if (!kctl)
return -ENOMEM;
kctl->id.device = codec->addr;
- err = snd_ctl_add(codec->bus->card, kctl);
+ err = snd_hda_ctl_add(codec, kctl);
if (err < 0)
return err;
}
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_add_new_ctls);
#ifdef CONFIG_SND_HDA_POWER_SAVE
static void hda_set_power_state(struct hda_codec *codec, hda_nid_t fg,
{
struct hda_codec *codec =
container_of(work, struct hda_codec, power_work.work);
+ struct hda_bus *bus = codec->bus;
if (!codec->power_on || codec->power_count) {
codec->power_transition = 0;
}
hda_call_codec_suspend(codec);
- if (codec->bus->ops.pm_notify)
- codec->bus->ops.pm_notify(codec);
+ if (bus->ops.pm_notify)
+ bus->ops.pm_notify(bus);
}
static void hda_keep_power_on(struct hda_codec *codec)
void snd_hda_power_up(struct hda_codec *codec)
{
+ struct hda_bus *bus = codec->bus;
+
codec->power_count++;
if (codec->power_on || codec->power_transition)
return;
codec->power_on = 1;
- if (codec->bus->ops.pm_notify)
- codec->bus->ops.pm_notify(codec);
+ if (bus->ops.pm_notify)
+ bus->ops.pm_notify(bus);
hda_call_codec_resume(codec);
cancel_delayed_work(&codec->power_work);
codec->power_transition = 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_power_up);
+
+#define power_save(codec) \
+ ((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
+
+#define power_save(codec) \
+ ((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
void snd_hda_power_down(struct hda_codec *codec)
{
--codec->power_count;
if (!codec->power_on || codec->power_count || codec->power_transition)
return;
- if (power_save) {
+ if (power_save(codec)) {
codec->power_transition = 1; /* avoid reentrance */
schedule_delayed_work(&codec->power_work,
- msecs_to_jiffies(power_save * 1000));
+ msecs_to_jiffies(power_save(codec) * 1000));
}
}
+EXPORT_SYMBOL_HDA(snd_hda_power_down);
int snd_hda_check_amp_list_power(struct hda_codec *codec,
struct hda_loopback_check *check,
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_check_amp_list_power);
#endif
/*
chmode[uinfo->value.enumerated.item].channels);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_ch_mode_info);
int snd_hda_ch_mode_get(struct hda_codec *codec,
struct snd_ctl_elem_value *ucontrol,
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_ch_mode_get);
int snd_hda_ch_mode_put(struct hda_codec *codec,
struct snd_ctl_elem_value *ucontrol,
snd_hda_sequence_write_cache(codec, chmode[mode].sequence);
return 1;
}
+EXPORT_SYMBOL_HDA(snd_hda_ch_mode_put);
/*
* input MUX helper
strcpy(uinfo->value.enumerated.name, imux->items[index].label);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_input_mux_info);
int snd_hda_input_mux_put(struct hda_codec *codec,
const struct hda_input_mux *imux,
*cur_val = idx;
return 1;
}
+EXPORT_SYMBOL_HDA(snd_hda_input_mux_put);
/*
mutex_unlock(&codec->spdif_mutex);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_open);
int snd_hda_multi_out_dig_prepare(struct hda_codec *codec,
struct hda_multi_out *mout,
mutex_unlock(&codec->spdif_mutex);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_prepare);
/*
* release the digital out
mutex_unlock(&codec->spdif_mutex);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_dig_close);
/*
* set up more restrictions for analog out
return snd_pcm_hw_constraint_step(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_CHANNELS, 2);
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_analog_open);
/*
* set up the i/o for analog out
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_analog_prepare);
/*
* clean up the setting for analog out
mutex_unlock(&codec->spdif_mutex);
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_multi_out_analog_cleanup);
/*
* Helper for automatic pin configuration
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_parse_pin_def_config);
/* labels for input pins */
const char *auto_pin_cfg_labels[AUTO_PIN_LAST] = {
"Mic", "Front Mic", "Line", "Front Line", "CD", "Aux"
};
+EXPORT_SYMBOL_HDA(auto_pin_cfg_labels);
#ifdef CONFIG_PM
}
return 0;
}
+EXPORT_SYMBOL_HDA(snd_hda_suspend);
/**
* snd_hda_resume - resume the codecs
* @bus: the HDA bus
- * @state: resume state
*
* Returns 0 if successful.
*
}
return 0;
}
-#ifdef CONFIG_SND_HDA_POWER_SAVE
-int snd_hda_codecs_inuse(struct hda_bus *bus)
-{
- struct hda_codec *codec;
+EXPORT_SYMBOL_HDA(snd_hda_resume);
+#endif /* CONFIG_PM */
- list_for_each_entry(codec, &bus->codec_list, list) {
- if (snd_hda_codec_needs_resume(codec))
- return 1;
+/*
+ * generic arrays
+ */
+
+/* get a new element from the given array
+ * if it exceeds the pre-allocated array size, re-allocate the array
+ */
+void *snd_array_new(struct snd_array *array)
+{
+ if (array->used >= array->alloced) {
+ int num = array->alloced + array->alloc_align;
+ void *nlist;
+ if (snd_BUG_ON(num >= 4096))
+ return NULL;
+ nlist = kcalloc(num + 1, array->elem_size, GFP_KERNEL);
+ if (!nlist)
+ return NULL;
+ if (array->list) {
+ memcpy(nlist, array->list,
+ array->elem_size * array->alloced);
+ kfree(array->list);
+ }
+ array->list = nlist;
+ array->alloced = num;
}
- return 0;
+ return snd_array_elem(array, array->used++);
}
-#endif
-#endif
+EXPORT_SYMBOL_HDA(snd_array_new);
+
+/* free the given array elements */
+void snd_array_free(struct snd_array *array)
+{
+ kfree(array->list);
+ array->used = 0;
+ array->alloced = 0;
+ array->list = NULL;
+}
+EXPORT_SYMBOL_HDA(snd_array_free);
+
+/*
+ * used by hda_proc.c and hda_eld.c
+ */
+void snd_print_pcm_rates(int pcm, char *buf, int buflen)
+{
+ static unsigned int rates[] = {
+ 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
+ 96000, 176400, 192000, 384000
+ };
+ int i, j;
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(rates); i++)
+ if (pcm & (1 << i))
+ j += snprintf(buf + j, buflen - j, " %d", rates[i]);
+
+ buf[j] = '\0'; /* necessary when j == 0 */
+}
+EXPORT_SYMBOL_HDA(snd_print_pcm_rates);
+
+void snd_print_pcm_bits(int pcm, char *buf, int buflen)
+{
+ static unsigned int bits[] = { 8, 16, 20, 24, 32 };
+ int i, j;
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(bits); i++)
+ if (pcm & (AC_SUPPCM_BITS_8 << i))
+ j += snprintf(buf + j, buflen - j, " %d", bits[i]);
+
+ buf[j] = '\0'; /* necessary when j == 0 */
+}
+EXPORT_SYMBOL_HDA(snd_print_pcm_bits);
+
+MODULE_DESCRIPTION("HDA codec core");
+MODULE_LICENSE("GPL");
/* max. codec address */
#define HDA_MAX_CODEC_ADDRESS 0x0f
+/*
+ * generic arrays
+ */
+struct snd_array {
+ unsigned int used;
+ unsigned int alloced;
+ unsigned int elem_size;
+ unsigned int alloc_align;
+ void *list;
+};
+
+void *snd_array_new(struct snd_array *array);
+void snd_array_free(struct snd_array *array);
+static inline void snd_array_init(struct snd_array *array, unsigned int size,
+ unsigned int align)
+{
+ array->elem_size = size;
+ array->alloc_align = align;
+}
+
+static inline void *snd_array_elem(struct snd_array *array, unsigned int idx)
+{
+ return array->list + idx * array->elem_size;
+}
+
+static inline unsigned int snd_array_index(struct snd_array *array, void *ptr)
+{
+ return (unsigned long)(ptr - array->list) / array->elem_size;
+}
+
/*
* Structures
*/
/* bus operators */
struct hda_bus_ops {
/* send a single command */
- int (*command)(struct hda_codec *codec, hda_nid_t nid, int direct,
- unsigned int verb, unsigned int parm);
+ int (*command)(struct hda_bus *bus, unsigned int cmd);
/* get a response from the last command */
- unsigned int (*get_response)(struct hda_codec *codec);
+ unsigned int (*get_response)(struct hda_bus *bus);
/* free the private data */
void (*private_free)(struct hda_bus *);
+ /* attach a PCM stream */
+ int (*attach_pcm)(struct hda_bus *bus, struct hda_codec *codec,
+ struct hda_pcm *pcm);
#ifdef CONFIG_SND_HDA_POWER_SAVE
/* notify power-up/down from codec to controller */
- void (*pm_notify)(struct hda_codec *codec);
+ void (*pm_notify)(struct hda_bus *bus);
#endif
};
void *private_data;
struct pci_dev *pci;
const char *modelname;
+ int *power_save;
struct hda_bus_ops ops;
};
void *private_data;
struct pci_dev *pci;
const char *modelname;
+ int *power_save;
struct hda_bus_ops ops;
/* codec linked list */
/* unsolicited event queue */
struct hda_bus_unsolicited *unsol;
- struct snd_info_entry *proc;
+ /* assigned PCMs */
+ DECLARE_BITMAP(pcm_dev_bits, SNDRV_PCM_DEVICES);
/* misc op flags */
unsigned int needs_damn_long_delay :1;
+ unsigned int shutdown :1; /* being unloaded */
};
/*
int (*patch)(struct hda_codec *codec);
};
+struct hda_codec_preset_list {
+ const struct hda_codec_preset *preset;
+ struct module *owner;
+ struct list_head list;
+};
+
+/* initial hook */
+int snd_hda_add_codec_preset(struct hda_codec_preset_list *preset);
+int snd_hda_delete_codec_preset(struct hda_codec_preset_list *preset);
+
/* ops set by the preset patch */
struct hda_codec_ops {
int (*build_controls)(struct hda_codec *codec);
struct hda_cache_rec {
u16 hash[64]; /* hash table for index */
- unsigned int num_entries; /* number of assigned entries */
- unsigned int size; /* allocated size */
- unsigned int record_size; /* record size (including header) */
- void *buffer; /* hash table entries */
+ struct snd_array buf; /* record entries */
};
/* PCM callbacks */
char *name;
struct hda_pcm_stream stream[2];
unsigned int pcm_type; /* HDA_PCM_TYPE_XXX */
- int device; /* assigned device number */
+ int device; /* device number to assign */
+ struct snd_pcm *pcm; /* assigned PCM instance */
};
/* codec information */
/* detected preset */
const struct hda_codec_preset *preset;
+ struct module *owner;
+ const char *name; /* codec name */
+ const char *modelname; /* model name for preset */
/* set by patch */
struct hda_codec_ops patch_ops;
hda_nid_t start_nid;
u32 *wcaps;
+ struct snd_array mixers; /* list of assigned mixer elements */
+
struct hda_cache_rec amp_cache; /* cache for amp access */
struct hda_cache_rec cmd_cache; /* cache for other commands */
unsigned int spdif_in_enable; /* SPDIF input enable? */
hda_nid_t *slave_dig_outs; /* optional digital out slave widgets */
+#ifdef CONFIG_SND_HDA_HWDEP
struct snd_hwdep *hwdep; /* assigned hwdep device */
+ struct snd_array init_verbs; /* additional init verbs */
+ struct snd_array hints; /* additional hints */
+#endif
/* misc flags */
unsigned int spdif_status_reset :1; /* needs to toggle SPDIF for each
int power_count; /* current (global) power refcount */
struct delayed_work power_work; /* delayed task for powerdown */
#endif
+
+ /* codec-specific additional proc output */
+ void (*proc_widget_hook)(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid);
};
/* direction */
int snd_hda_bus_new(struct snd_card *card, const struct hda_bus_template *temp,
struct hda_bus **busp);
int snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr,
- struct hda_codec **codecp);
+ int do_init, struct hda_codec **codecp);
/*
* low level functions
* Mixer
*/
int snd_hda_build_controls(struct hda_bus *bus);
+int snd_hda_codec_build_controls(struct hda_codec *codec);
/*
* PCM
*/
int snd_hda_build_pcms(struct hda_bus *bus);
+int snd_hda_codec_build_pcms(struct hda_codec *codec);
void snd_hda_codec_setup_stream(struct hda_codec *codec, hda_nid_t nid,
u32 stream_tag,
int channel_id, int format);
unsigned int channels,
unsigned int format,
unsigned int maxbps);
-int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
- u32 *ratesp, u64 *formatsp, unsigned int *bpsp);
int snd_hda_is_supported_format(struct hda_codec *codec, hda_nid_t nid,
unsigned int format);
int snd_hda_resume(struct hda_bus *bus);
#endif
+/*
+ * get widget information
+ */
+const char *snd_hda_get_jack_connectivity(u32 cfg);
+const char *snd_hda_get_jack_type(u32 cfg);
+const char *snd_hda_get_jack_location(u32 cfg);
+
/*
* power saving
*/
void snd_hda_power_up(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
#define snd_hda_codec_needs_resume(codec) codec->power_count
-int snd_hda_codecs_inuse(struct hda_bus *bus);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#define snd_hda_codec_needs_resume(codec) 1
-#define snd_hda_codecs_inuse(bus) 1
+#endif
+
+/*
+ * Codec modularization
+ */
+
+/* Export symbols only for communication with codec drivers;
+ * When built in kernel, all HD-audio drivers are supposed to be statically
+ * linked to the kernel. Thus, the symbols don't have to (or shouldn't) be
+ * exported unless it's built as a module.
+ */
+#ifdef MODULE
+#define EXPORT_SYMBOL_HDA(sym) EXPORT_SYMBOL_GPL(sym)
+#else
+#define EXPORT_SYMBOL_HDA(sym)
#endif
#endif /* __SOUND_HDA_CODEC_H */
--- /dev/null
+/*
+ * Generic routines and proc interface for ELD(EDID Like Data) information
+ *
+ * Copyright(c) 2008 Intel Corporation.
+ *
+ * Authors:
+ * Wu Fengguang <wfg@linux.intel.com>
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <sound/core.h>
+#include <asm/unaligned.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+enum eld_versions {
+ ELD_VER_CEA_861D = 2,
+ ELD_VER_PARTIAL = 31,
+};
+
+enum cea_edid_versions {
+ CEA_EDID_VER_NONE = 0,
+ CEA_EDID_VER_CEA861 = 1,
+ CEA_EDID_VER_CEA861A = 2,
+ CEA_EDID_VER_CEA861BCD = 3,
+ CEA_EDID_VER_RESERVED = 4,
+};
+
+static char *cea_speaker_allocation_names[] = {
+ /* 0 */ "FL/FR",
+ /* 1 */ "LFE",
+ /* 2 */ "FC",
+ /* 3 */ "RL/RR",
+ /* 4 */ "RC",
+ /* 5 */ "FLC/FRC",
+ /* 6 */ "RLC/RRC",
+ /* 7 */ "FLW/FRW",
+ /* 8 */ "FLH/FRH",
+ /* 9 */ "TC",
+ /* 10 */ "FCH",
+};
+
+static char *eld_connection_type_names[4] = {
+ "HDMI",
+ "DisplayPort",
+ "2-reserved",
+ "3-reserved"
+};
+
+enum cea_audio_coding_types {
+ AUDIO_CODING_TYPE_REF_STREAM_HEADER = 0,
+ AUDIO_CODING_TYPE_LPCM = 1,
+ AUDIO_CODING_TYPE_AC3 = 2,
+ AUDIO_CODING_TYPE_MPEG1 = 3,
+ AUDIO_CODING_TYPE_MP3 = 4,
+ AUDIO_CODING_TYPE_MPEG2 = 5,
+ AUDIO_CODING_TYPE_AACLC = 6,
+ AUDIO_CODING_TYPE_DTS = 7,
+ AUDIO_CODING_TYPE_ATRAC = 8,
+ AUDIO_CODING_TYPE_SACD = 9,
+ AUDIO_CODING_TYPE_EAC3 = 10,
+ AUDIO_CODING_TYPE_DTS_HD = 11,
+ AUDIO_CODING_TYPE_MLP = 12,
+ AUDIO_CODING_TYPE_DST = 13,
+ AUDIO_CODING_TYPE_WMAPRO = 14,
+ AUDIO_CODING_TYPE_REF_CXT = 15,
+ /* also include valid xtypes below */
+ AUDIO_CODING_TYPE_HE_AAC = 15,
+ AUDIO_CODING_TYPE_HE_AAC2 = 16,
+ AUDIO_CODING_TYPE_MPEG_SURROUND = 17,
+};
+
+enum cea_audio_coding_xtypes {
+ AUDIO_CODING_XTYPE_HE_REF_CT = 0,
+ AUDIO_CODING_XTYPE_HE_AAC = 1,
+ AUDIO_CODING_XTYPE_HE_AAC2 = 2,
+ AUDIO_CODING_XTYPE_MPEG_SURROUND = 3,
+ AUDIO_CODING_XTYPE_FIRST_RESERVED = 4,
+};
+
+static char *cea_audio_coding_type_names[] = {
+ /* 0 */ "undefined",
+ /* 1 */ "LPCM",
+ /* 2 */ "AC-3",
+ /* 3 */ "MPEG1",
+ /* 4 */ "MP3",
+ /* 5 */ "MPEG2",
+ /* 6 */ "AAC-LC",
+ /* 7 */ "DTS",
+ /* 8 */ "ATRAC",
+ /* 9 */ "DSD (One Bit Audio)",
+ /* 10 */ "E-AC-3/DD+ (Dolby Digital Plus)",
+ /* 11 */ "DTS-HD",
+ /* 12 */ "MLP (Dolby TrueHD)",
+ /* 13 */ "DST",
+ /* 14 */ "WMAPro",
+ /* 15 */ "HE-AAC",
+ /* 16 */ "HE-AACv2",
+ /* 17 */ "MPEG Surround",
+};
+
+/*
+ * The following two lists are shared between
+ * - HDMI audio InfoFrame (source to sink)
+ * - CEA E-EDID Extension (sink to source)
+ */
+
+/*
+ * SS1:SS0 index => sample size
+ */
+static int cea_sample_sizes[4] = {
+ 0, /* 0: Refer to Stream Header */
+ AC_SUPPCM_BITS_16, /* 1: 16 bits */
+ AC_SUPPCM_BITS_20, /* 2: 20 bits */
+ AC_SUPPCM_BITS_24, /* 3: 24 bits */
+};
+
+/*
+ * SF2:SF1:SF0 index => sampling frequency
+ */
+static int cea_sampling_frequencies[8] = {
+ 0, /* 0: Refer to Stream Header */
+ SNDRV_PCM_RATE_32000, /* 1: 32000Hz */
+ SNDRV_PCM_RATE_44100, /* 2: 44100Hz */
+ SNDRV_PCM_RATE_48000, /* 3: 48000Hz */
+ SNDRV_PCM_RATE_88200, /* 4: 88200Hz */
+ SNDRV_PCM_RATE_96000, /* 5: 96000Hz */
+ SNDRV_PCM_RATE_176400, /* 6: 176400Hz */
+ SNDRV_PCM_RATE_192000, /* 7: 192000Hz */
+};
+
+static unsigned char hdmi_get_eld_byte(struct hda_codec *codec, hda_nid_t nid,
+ int byte_index)
+{
+ unsigned int val;
+
+ val = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_HDMI_ELDD, byte_index);
+
+#ifdef BE_PARANOID
+ printk(KERN_INFO "HDMI: ELD data byte %d: 0x%x\n", byte_index, val);
+#endif
+
+ if ((val & AC_ELDD_ELD_VALID) == 0) {
+ snd_printd(KERN_INFO "HDMI: invalid ELD data byte %d\n",
+ byte_index);
+ val = 0;
+ }
+
+ return val & AC_ELDD_ELD_DATA;
+}
+
+#define GRAB_BITS(buf, byte, lowbit, bits) \
+({ \
+ BUILD_BUG_ON(lowbit > 7); \
+ BUILD_BUG_ON(bits > 8); \
+ BUILD_BUG_ON(bits <= 0); \
+ \
+ (buf[byte] >> (lowbit)) & ((1 << (bits)) - 1); \
+})
+
+static void hdmi_update_short_audio_desc(struct cea_sad *a,
+ const unsigned char *buf)
+{
+ int i;
+ int val;
+
+ val = GRAB_BITS(buf, 1, 0, 7);
+ a->rates = 0;
+ for (i = 0; i < 7; i++)
+ if (val & (1 << i))
+ a->rates |= cea_sampling_frequencies[i + 1];
+
+ a->channels = GRAB_BITS(buf, 0, 0, 3);
+ a->channels++;
+
+ a->format = GRAB_BITS(buf, 0, 3, 4);
+ switch (a->format) {
+ case AUDIO_CODING_TYPE_REF_STREAM_HEADER:
+ snd_printd(KERN_INFO
+ "HDMI: audio coding type 0 not expected\n");
+ break;
+
+ case AUDIO_CODING_TYPE_LPCM:
+ val = GRAB_BITS(buf, 2, 0, 3);
+ a->sample_bits = 0;
+ for (i = 0; i < 3; i++)
+ if (val & (1 << i))
+ a->sample_bits |= cea_sample_sizes[i + 1];
+ break;
+
+ case AUDIO_CODING_TYPE_AC3:
+ case AUDIO_CODING_TYPE_MPEG1:
+ case AUDIO_CODING_TYPE_MP3:
+ case AUDIO_CODING_TYPE_MPEG2:
+ case AUDIO_CODING_TYPE_AACLC:
+ case AUDIO_CODING_TYPE_DTS:
+ case AUDIO_CODING_TYPE_ATRAC:
+ a->max_bitrate = GRAB_BITS(buf, 2, 0, 8);
+ a->max_bitrate *= 8000;
+ break;
+
+ case AUDIO_CODING_TYPE_SACD:
+ break;
+
+ case AUDIO_CODING_TYPE_EAC3:
+ break;
+
+ case AUDIO_CODING_TYPE_DTS_HD:
+ break;
+
+ case AUDIO_CODING_TYPE_MLP:
+ break;
+
+ case AUDIO_CODING_TYPE_DST:
+ break;
+
+ case AUDIO_CODING_TYPE_WMAPRO:
+ a->profile = GRAB_BITS(buf, 2, 0, 3);
+ break;
+
+ case AUDIO_CODING_TYPE_REF_CXT:
+ a->format = GRAB_BITS(buf, 2, 3, 5);
+ if (a->format == AUDIO_CODING_XTYPE_HE_REF_CT ||
+ a->format >= AUDIO_CODING_XTYPE_FIRST_RESERVED) {
+ snd_printd(KERN_INFO
+ "HDMI: audio coding xtype %d not expected\n",
+ a->format);
+ a->format = 0;
+ } else
+ a->format += AUDIO_CODING_TYPE_HE_AAC -
+ AUDIO_CODING_XTYPE_HE_AAC;
+ break;
+ }
+}
+
+/*
+ * Be careful, ELD buf could be totally rubbish!
+ */
+static int hdmi_update_eld(struct hdmi_eld *e,
+ const unsigned char *buf, int size)
+{
+ int mnl;
+ int i;
+
+ e->eld_ver = GRAB_BITS(buf, 0, 3, 5);
+ if (e->eld_ver != ELD_VER_CEA_861D &&
+ e->eld_ver != ELD_VER_PARTIAL) {
+ snd_printd(KERN_INFO "HDMI: Unknown ELD version %d\n",
+ e->eld_ver);
+ goto out_fail;
+ }
+
+ e->eld_size = size;
+ e->baseline_len = GRAB_BITS(buf, 2, 0, 8);
+ mnl = GRAB_BITS(buf, 4, 0, 5);
+ e->cea_edid_ver = GRAB_BITS(buf, 4, 5, 3);
+
+ e->support_hdcp = GRAB_BITS(buf, 5, 0, 1);
+ e->support_ai = GRAB_BITS(buf, 5, 1, 1);
+ e->conn_type = GRAB_BITS(buf, 5, 2, 2);
+ e->sad_count = GRAB_BITS(buf, 5, 4, 4);
+
+ e->aud_synch_delay = GRAB_BITS(buf, 6, 0, 8) * 2;
+ e->spk_alloc = GRAB_BITS(buf, 7, 0, 7);
+
+ e->port_id = get_unaligned_le64(buf + 8);
+
+ /* not specified, but the spec's tendency is little endian */
+ e->manufacture_id = get_unaligned_le16(buf + 16);
+ e->product_id = get_unaligned_le16(buf + 18);
+
+ if (mnl > ELD_MAX_MNL) {
+ snd_printd(KERN_INFO "HDMI: MNL is reserved value %d\n", mnl);
+ goto out_fail;
+ } else if (ELD_FIXED_BYTES + mnl > size) {
+ snd_printd(KERN_INFO "HDMI: out of range MNL %d\n", mnl);
+ goto out_fail;
+ } else
+ strlcpy(e->monitor_name, buf + ELD_FIXED_BYTES, mnl);
+
+ for (i = 0; i < e->sad_count; i++) {
+ if (ELD_FIXED_BYTES + mnl + 3 * (i + 1) > size) {
+ snd_printd(KERN_INFO "HDMI: out of range SAD %d\n", i);
+ goto out_fail;
+ }
+ hdmi_update_short_audio_desc(e->sad + i,
+ buf + ELD_FIXED_BYTES + mnl + 3 * i);
+ }
+
+ return 0;
+
+out_fail:
+ e->eld_ver = 0;
+ return -EINVAL;
+}
+
+static int hdmi_present_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0);
+}
+
+static int hdmi_eld_valid(struct hda_codec *codec, hda_nid_t nid)
+{
+ int eldv;
+ int present;
+
+ present = hdmi_present_sense(codec, nid);
+ eldv = (present & AC_PINSENSE_ELDV);
+ present = (present & AC_PINSENSE_PRESENCE);
+
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ printk(KERN_INFO "HDMI: sink_present = %d, eld_valid = %d\n",
+ !!present, !!eldv);
+#endif
+
+ return eldv && present;
+}
+
+int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid)
+{
+ return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE,
+ AC_DIPSIZE_ELD_BUF);
+}
+
+int snd_hdmi_get_eld(struct hdmi_eld *eld,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ int i;
+ int ret;
+ int size;
+ unsigned char *buf;
+
+ if (!hdmi_eld_valid(codec, nid))
+ return -ENOENT;
+
+ size = snd_hdmi_get_eld_size(codec, nid);
+ if (size == 0) {
+ /* wfg: workaround for ASUS P5E-VM HDMI board */
+ snd_printd(KERN_INFO "HDMI: ELD buf size is 0, force 128\n");
+ size = 128;
+ }
+ if (size < ELD_FIXED_BYTES || size > PAGE_SIZE) {
+ snd_printd(KERN_INFO "HDMI: invalid ELD buf size %d\n", size);
+ return -ERANGE;
+ }
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ for (i = 0; i < size; i++)
+ buf[i] = hdmi_get_eld_byte(codec, nid, i);
+
+ ret = hdmi_update_eld(eld, buf, size);
+
+ kfree(buf);
+ return ret;
+}
+
+static void hdmi_show_short_audio_desc(struct cea_sad *a)
+{
+ char buf[SND_PRINT_RATES_ADVISED_BUFSIZE];
+ char buf2[8 + SND_PRINT_BITS_ADVISED_BUFSIZE] = ", bits =";
+
+ if (!a->format)
+ return;
+
+ snd_print_pcm_rates(a->rates, buf, sizeof(buf));
+
+ if (a->format == AUDIO_CODING_TYPE_LPCM)
+ snd_print_pcm_bits(a->sample_bits, buf2 + 8, sizeof(buf2 - 8));
+ else if (a->max_bitrate)
+ snprintf(buf2, sizeof(buf2),
+ ", max bitrate = %d", a->max_bitrate);
+ else
+ buf2[0] = '\0';
+
+ printk(KERN_INFO "HDMI: supports coding type %s:"
+ " channels = %d, rates =%s%s\n",
+ cea_audio_coding_type_names[a->format],
+ a->channels,
+ buf,
+ buf2);
+}
+
+void snd_print_channel_allocation(int spk_alloc, char *buf, int buflen)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < ARRAY_SIZE(cea_speaker_allocation_names); i++) {
+ if (spk_alloc & (1 << i))
+ j += snprintf(buf + j, buflen - j, " %s",
+ cea_speaker_allocation_names[i]);
+ }
+ buf[j] = '\0'; /* necessary when j == 0 */
+}
+
+void snd_hdmi_show_eld(struct hdmi_eld *e)
+{
+ int i;
+
+ printk(KERN_INFO "HDMI: detected monitor %s at connection type %s\n",
+ e->monitor_name,
+ eld_connection_type_names[e->conn_type]);
+
+ if (e->spk_alloc) {
+ char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
+ snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf));
+ printk(KERN_INFO "HDMI: available speakers:%s\n", buf);
+ }
+
+ for (i = 0; i < e->sad_count; i++)
+ hdmi_show_short_audio_desc(e->sad + i);
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void hdmi_print_sad_info(int i, struct cea_sad *a,
+ struct snd_info_buffer *buffer)
+{
+ char buf[SND_PRINT_RATES_ADVISED_BUFSIZE];
+
+ snd_iprintf(buffer, "sad%d_coding_type\t[0x%x] %s\n",
+ i, a->format, cea_audio_coding_type_names[a->format]);
+ snd_iprintf(buffer, "sad%d_channels\t\t%d\n", i, a->channels);
+
+ snd_print_pcm_rates(a->rates, buf, sizeof(buf));
+ snd_iprintf(buffer, "sad%d_rates\t\t[0x%x]%s\n", i, a->rates, buf);
+
+ if (a->format == AUDIO_CODING_TYPE_LPCM) {
+ snd_print_pcm_bits(a->sample_bits, buf, sizeof(buf));
+ snd_iprintf(buffer, "sad%d_bits\t\t[0x%x]%s\n",
+ i, a->sample_bits, buf);
+ }
+
+ if (a->max_bitrate)
+ snd_iprintf(buffer, "sad%d_max_bitrate\t%d\n",
+ i, a->max_bitrate);
+
+ if (a->profile)
+ snd_iprintf(buffer, "sad%d_profile\t\t%d\n", i, a->profile);
+}
+
+static void hdmi_print_eld_info(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct hdmi_eld *e = entry->private_data;
+ char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
+ int i;
+ static char *eld_versoin_names[32] = {
+ "reserved",
+ "reserved",
+ "CEA-861D or below",
+ [3 ... 30] = "reserved",
+ [31] = "partial"
+ };
+ static char *cea_edid_version_names[8] = {
+ "no CEA EDID Timing Extension block present",
+ "CEA-861",
+ "CEA-861-A",
+ "CEA-861-B, C or D",
+ [4 ... 7] = "reserved"
+ };
+
+ snd_iprintf(buffer, "monitor_name\t\t%s\n", e->monitor_name);
+ snd_iprintf(buffer, "connection_type\t\t%s\n",
+ eld_connection_type_names[e->conn_type]);
+ snd_iprintf(buffer, "eld_version\t\t[0x%x] %s\n", e->eld_ver,
+ eld_versoin_names[e->eld_ver]);
+ snd_iprintf(buffer, "edid_version\t\t[0x%x] %s\n", e->cea_edid_ver,
+ cea_edid_version_names[e->cea_edid_ver]);
+ snd_iprintf(buffer, "manufacture_id\t\t0x%x\n", e->manufacture_id);
+ snd_iprintf(buffer, "product_id\t\t0x%x\n", e->product_id);
+ snd_iprintf(buffer, "port_id\t\t\t0x%llx\n", (long long)e->port_id);
+ snd_iprintf(buffer, "support_hdcp\t\t%d\n", e->support_hdcp);
+ snd_iprintf(buffer, "support_ai\t\t%d\n", e->support_ai);
+ snd_iprintf(buffer, "audio_sync_delay\t%d\n", e->aud_synch_delay);
+
+ snd_print_channel_allocation(e->spk_alloc, buf, sizeof(buf));
+ snd_iprintf(buffer, "speakers\t\t[0x%x]%s\n", e->spk_alloc, buf);
+
+ snd_iprintf(buffer, "sad_count\t\t%d\n", e->sad_count);
+
+ for (i = 0; i < e->sad_count; i++)
+ hdmi_print_sad_info(i, e->sad + i, buffer);
+}
+
+static void hdmi_write_eld_info(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct hdmi_eld *e = entry->private_data;
+ char line[64];
+ char name[64];
+ char *sname;
+ long long val;
+ int n;
+
+ while (!snd_info_get_line(buffer, line, sizeof(line))) {
+ if (sscanf(line, "%s %llx", name, &val) != 2)
+ continue;
+ /*
+ * We don't allow modification to these fields:
+ * monitor_name manufacture_id product_id
+ * eld_version edid_version
+ */
+ if (!strcmp(name, "connection_type"))
+ e->conn_type = val;
+ else if (!strcmp(name, "port_id"))
+ e->port_id = val;
+ else if (!strcmp(name, "support_hdcp"))
+ e->support_hdcp = val;
+ else if (!strcmp(name, "support_ai"))
+ e->support_ai = val;
+ else if (!strcmp(name, "audio_sync_delay"))
+ e->aud_synch_delay = val;
+ else if (!strcmp(name, "speakers"))
+ e->spk_alloc = val;
+ else if (!strcmp(name, "sad_count"))
+ e->sad_count = val;
+ else if (!strncmp(name, "sad", 3)) {
+ sname = name + 4;
+ n = name[3] - '0';
+ if (name[4] >= '0' && name[4] <= '9') {
+ sname++;
+ n = 10 * n + name[4] - '0';
+ }
+ if (n < 0 || n > 31) /* double the CEA limit */
+ continue;
+ if (!strcmp(sname, "_coding_type"))
+ e->sad[n].format = val;
+ else if (!strcmp(sname, "_channels"))
+ e->sad[n].channels = val;
+ else if (!strcmp(sname, "_rates"))
+ e->sad[n].rates = val;
+ else if (!strcmp(sname, "_bits"))
+ e->sad[n].sample_bits = val;
+ else if (!strcmp(sname, "_max_bitrate"))
+ e->sad[n].max_bitrate = val;
+ else if (!strcmp(sname, "_profile"))
+ e->sad[n].profile = val;
+ if (n >= e->sad_count)
+ e->sad_count = n + 1;
+ }
+ }
+}
+
+
+int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld)
+{
+ char name[32];
+ struct snd_info_entry *entry;
+ int err;
+
+ snprintf(name, sizeof(name), "eld#%d", codec->addr);
+ err = snd_card_proc_new(codec->bus->card, name, &entry);
+ if (err < 0)
+ return err;
+
+ snd_info_set_text_ops(entry, eld, hdmi_print_eld_info);
+ entry->c.text.write = hdmi_write_eld_info;
+ entry->mode |= S_IWUSR;
+ eld->proc_entry = entry;
+
+ return 0;
+}
+
+void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld)
+{
+ if (!codec->bus->shutdown && eld->proc_entry) {
+ snd_device_free(codec->bus->card, eld->proc_entry);
+ eld->proc_entry = NULL;
+ }
+}
+
+#endif /* CONFIG_PROC_FS */
if (is_loopback)
add_input_loopback(codec, node->nid, HDA_INPUT, index);
snd_printdd("[%s] NID=0x%x, DIR=IN, IDX=0x%x\n", name, node->nid, index);
- if ((err = snd_ctl_add(codec->bus->card, snd_ctl_new1(&knew, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+ if (err < 0)
return err;
created = 1;
} else if ((node->wid_caps & AC_WCAP_OUT_AMP) &&
if (is_loopback)
add_input_loopback(codec, node->nid, HDA_OUTPUT, 0);
snd_printdd("[%s] NID=0x%x, DIR=OUT\n", name, node->nid);
- if ((err = snd_ctl_add(codec->bus->card, snd_ctl_new1(&knew, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+ if (err < 0)
return err;
created = 1;
}
(node->amp_in_caps & AC_AMPCAP_NUM_STEPS)) {
knew = (struct snd_kcontrol_new)HDA_CODEC_VOLUME(name, node->nid, index, HDA_INPUT);
snd_printdd("[%s] NID=0x%x, DIR=IN, IDX=0x%x\n", name, node->nid, index);
- if ((err = snd_ctl_add(codec->bus->card, snd_ctl_new1(&knew, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+ if (err < 0)
return err;
created = 1;
} else if ((node->wid_caps & AC_WCAP_OUT_AMP) &&
(node->amp_out_caps & AC_AMPCAP_NUM_STEPS)) {
knew = (struct snd_kcontrol_new)HDA_CODEC_VOLUME(name, node->nid, 0, HDA_OUTPUT);
snd_printdd("[%s] NID=0x%x, DIR=OUT\n", name, node->nid);
- if ((err = snd_ctl_add(codec->bus->card, snd_ctl_new1(&knew, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+ if (err < 0)
return err;
created = 1;
}
}
/* create input MUX if multiple sources are available */
- if ((err = snd_ctl_add(codec->bus->card,
- snd_ctl_new1(&cap_sel, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&cap_sel, codec));
+ if (err < 0)
return err;
/* no volume control? */
HDA_CODEC_VOLUME(name, adc_node->nid,
spec->input_mux.items[i].index,
HDA_INPUT);
- if ((err = snd_ctl_add(codec->bus->card,
- snd_ctl_new1(&knew, codec))) < 0)
+ err = snd_hda_ctl_add(codec, snd_ctl_new1(&knew, codec));
+ if (err < 0)
return err;
}
snd_hda_generic_free(codec);
return err;
}
+EXPORT_SYMBOL(snd_hda_parse_generic_codec);
#include <linux/pci.h>
#include <linux/compat.h>
#include <linux/mutex.h>
+#include <linux/ctype.h>
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
#include <sound/hda_hwdep.h>
+#include <sound/minors.h>
/*
* write/read an out-of-bound verb
return 0;
}
-int __devinit snd_hda_create_hwdep(struct hda_codec *codec)
+static void clear_hwdep_elements(struct hda_codec *codec)
+{
+ char **head;
+ int i;
+
+ /* clear init verbs */
+ snd_array_free(&codec->init_verbs);
+ /* clear hints */
+ head = codec->hints.list;
+ for (i = 0; i < codec->hints.used; i++, head++)
+ kfree(*head);
+ snd_array_free(&codec->hints);
+}
+
+static void hwdep_free(struct snd_hwdep *hwdep)
+{
+ clear_hwdep_elements(hwdep->private_data);
+}
+
+int /*__devinit*/ snd_hda_create_hwdep(struct hda_codec *codec)
{
char hwname[16];
struct snd_hwdep *hwdep;
sprintf(hwdep->name, "HDA Codec %d", codec->addr);
hwdep->iface = SNDRV_HWDEP_IFACE_HDA;
hwdep->private_data = codec;
+ hwdep->private_free = hwdep_free;
hwdep->exclusive = 1;
hwdep->ops.open = hda_hwdep_open;
hwdep->ops.ioctl_compat = hda_hwdep_ioctl_compat;
#endif
+ snd_array_init(&codec->init_verbs, sizeof(struct hda_verb), 32);
+ snd_array_init(&codec->hints, sizeof(char *), 32);
+
return 0;
}
+
+#ifdef CONFIG_SND_HDA_RECONFIG
+
+/*
+ * sysfs interface
+ */
+
+static int clear_codec(struct hda_codec *codec)
+{
+ snd_hda_codec_reset(codec);
+ clear_hwdep_elements(codec);
+ return 0;
+}
+
+static int reconfig_codec(struct hda_codec *codec)
+{
+ int err;
+
+ snd_printk(KERN_INFO "hda-codec: reconfiguring\n");
+ snd_hda_codec_reset(codec);
+ err = snd_hda_codec_configure(codec);
+ if (err < 0)
+ return err;
+ /* rebuild PCMs */
+ err = snd_hda_codec_build_pcms(codec);
+ if (err < 0)
+ return err;
+ /* rebuild mixers */
+ err = snd_hda_codec_build_controls(codec);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+/*
+ * allocate a string at most len chars, and remove the trailing EOL
+ */
+static char *kstrndup_noeol(const char *src, size_t len)
+{
+ char *s = kstrndup(src, len, GFP_KERNEL);
+ char *p;
+ if (!s)
+ return NULL;
+ p = strchr(s, '\n');
+ if (p)
+ *p = 0;
+ return s;
+}
+
+#define CODEC_INFO_SHOW(type) \
+static ssize_t type##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
+ struct hda_codec *codec = hwdep->private_data; \
+ return sprintf(buf, "0x%x\n", codec->type); \
+}
+
+#define CODEC_INFO_STR_SHOW(type) \
+static ssize_t type##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *buf) \
+{ \
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
+ struct hda_codec *codec = hwdep->private_data; \
+ return sprintf(buf, "%s\n", \
+ codec->type ? codec->type : ""); \
+}
+
+CODEC_INFO_SHOW(vendor_id);
+CODEC_INFO_SHOW(subsystem_id);
+CODEC_INFO_SHOW(revision_id);
+CODEC_INFO_SHOW(afg);
+CODEC_INFO_SHOW(mfg);
+CODEC_INFO_STR_SHOW(name);
+CODEC_INFO_STR_SHOW(modelname);
+
+#define CODEC_INFO_STORE(type) \
+static ssize_t type##_store(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
+ struct hda_codec *codec = hwdep->private_data; \
+ char *after; \
+ codec->type = simple_strtoul(buf, &after, 0); \
+ return count; \
+}
+
+#define CODEC_INFO_STR_STORE(type) \
+static ssize_t type##_store(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
+ struct hda_codec *codec = hwdep->private_data; \
+ char *s = kstrndup_noeol(buf, 64); \
+ if (!s) \
+ return -ENOMEM; \
+ kfree(codec->type); \
+ codec->type = s; \
+ return count; \
+}
+
+CODEC_INFO_STORE(vendor_id);
+CODEC_INFO_STORE(subsystem_id);
+CODEC_INFO_STORE(revision_id);
+CODEC_INFO_STR_STORE(name);
+CODEC_INFO_STR_STORE(modelname);
+
+#define CODEC_ACTION_STORE(type) \
+static ssize_t type##_store(struct device *dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t count) \
+{ \
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev); \
+ struct hda_codec *codec = hwdep->private_data; \
+ int err = 0; \
+ if (*buf) \
+ err = type##_codec(codec); \
+ return err < 0 ? err : count; \
+}
+
+CODEC_ACTION_STORE(reconfig);
+CODEC_ACTION_STORE(clear);
+
+static ssize_t init_verbs_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ char *p;
+ struct hda_verb verb, *v;
+
+ verb.nid = simple_strtoul(buf, &p, 0);
+ verb.verb = simple_strtoul(p, &p, 0);
+ verb.param = simple_strtoul(p, &p, 0);
+ if (!verb.nid || !verb.verb || !verb.param)
+ return -EINVAL;
+ v = snd_array_new(&codec->init_verbs);
+ if (!v)
+ return -ENOMEM;
+ *v = verb;
+ return count;
+}
+
+static ssize_t hints_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct snd_hwdep *hwdep = dev_get_drvdata(dev);
+ struct hda_codec *codec = hwdep->private_data;
+ char *p;
+ char **hint;
+
+ if (!*buf || isspace(*buf) || *buf == '#' || *buf == '\n')
+ return count;
+ p = kstrndup_noeol(buf, 1024);
+ if (!p)
+ return -ENOMEM;
+ hint = snd_array_new(&codec->hints);
+ if (!hint) {
+ kfree(p);
+ return -ENOMEM;
+ }
+ *hint = p;
+ return count;
+}
+
+#define CODEC_ATTR_RW(type) \
+ __ATTR(type, 0644, type##_show, type##_store)
+#define CODEC_ATTR_RO(type) \
+ __ATTR_RO(type)
+#define CODEC_ATTR_WO(type) \
+ __ATTR(type, 0200, NULL, type##_store)
+
+static struct device_attribute codec_attrs[] = {
+ CODEC_ATTR_RW(vendor_id),
+ CODEC_ATTR_RW(subsystem_id),
+ CODEC_ATTR_RW(revision_id),
+ CODEC_ATTR_RO(afg),
+ CODEC_ATTR_RO(mfg),
+ CODEC_ATTR_RW(name),
+ CODEC_ATTR_RW(modelname),
+ CODEC_ATTR_WO(init_verbs),
+ CODEC_ATTR_WO(hints),
+ CODEC_ATTR_WO(reconfig),
+ CODEC_ATTR_WO(clear),
+};
+
+/*
+ * create sysfs files on hwdep directory
+ */
+int snd_hda_hwdep_add_sysfs(struct hda_codec *codec)
+{
+ struct snd_hwdep *hwdep = codec->hwdep;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(codec_attrs); i++)
+ snd_add_device_sysfs_file(SNDRV_DEVICE_TYPE_HWDEP, hwdep->card,
+ hwdep->device, &codec_attrs[i]);
+ return 0;
+}
+
+#endif /* CONFIG_SND_HDA_RECONFIG */
static int position_fix[SNDRV_CARDS];
static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
+static int probe_only[SNDRV_CARDS];
static int single_cmd;
static int enable_msi;
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1).");
+module_param_array(probe_only, bool, NULL, 0444);
+MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization.");
module_param(single_cmd, bool, 0444);
MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs "
"(for debugging only).");
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
#ifdef CONFIG_SND_HDA_POWER_SAVE
-/* power_save option is defined in hda_codec.c */
+static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
+module_param(power_save, int, 0644);
+MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
+ "(in second, 0 = disable).");
/* reset the HD-audio controller in power save mode.
* this may give more power-saving, but will take longer time to
/* Define VIA HD Audio Device ID*/
#define VIA_HDAC_DEVICE_ID 0x3288
+/* HD Audio class code */
+#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
/*
*/
unsigned int msi :1;
unsigned int irq_pending_warned :1;
unsigned int via_dmapos_patch :1; /* enable DMA-position fix for VIA */
+ unsigned int probing :1; /* codec probing phase */
/* for debugging */
unsigned int last_cmd; /* last issued command (to sync) */
AZX_DRIVER_ULI,
AZX_DRIVER_NVIDIA,
AZX_DRIVER_TERA,
+ AZX_DRIVER_GENERIC,
AZX_NUM_DRIVERS, /* keep this as last entry */
};
[AZX_DRIVER_ULI] = "HDA ULI M5461",
[AZX_DRIVER_NVIDIA] = "HDA NVidia",
[AZX_DRIVER_TERA] = "HDA Teradici",
+ [AZX_DRIVER_GENERIC] = "HD-Audio Generic",
};
/*
}
/* send a command */
-static int azx_corb_send_cmd(struct hda_codec *codec, u32 val)
+static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
unsigned int wp;
/* add command to corb */
}
/* receive a response */
-static unsigned int azx_rirb_get_response(struct hda_codec *codec)
+static unsigned int azx_rirb_get_response(struct hda_bus *bus)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
unsigned long timeout;
again:
}
if (time_after(jiffies, timeout))
break;
- if (codec->bus->needs_damn_long_delay)
+ if (bus->needs_damn_long_delay)
msleep(2); /* temporary workaround */
else {
udelay(10);
goto again;
}
+ if (chip->probing) {
+ /* If this critical timeout happens during the codec probing
+ * phase, this is likely an access to a non-existing codec
+ * slot. Better to return an error and reset the system.
+ */
+ return -1;
+ }
+
snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
"switching to single_cmd mode: last cmd=0x%08x\n",
chip->last_cmd);
*/
/* send a command */
-static int azx_single_send_cmd(struct hda_codec *codec, u32 val)
+static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
int timeout = 50;
while (timeout--) {
}
/* receive a response */
-static unsigned int azx_single_get_response(struct hda_codec *codec)
+static unsigned int azx_single_get_response(struct hda_bus *bus)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
int timeout = 50;
while (timeout--) {
*/
/* send a command */
-static int azx_send_cmd(struct hda_codec *codec, hda_nid_t nid,
- int direct, unsigned int verb,
- unsigned int para)
+static int azx_send_cmd(struct hda_bus *bus, unsigned int val)
{
- struct azx *chip = codec->bus->private_data;
- u32 val;
-
- val = (u32)(codec->addr & 0x0f) << 28;
- val |= (u32)direct << 27;
- val |= (u32)nid << 20;
- val |= verb << 8;
- val |= para;
- chip->last_cmd = val;
+ struct azx *chip = bus->private_data;
+ chip->last_cmd = val;
if (chip->single_cmd)
- return azx_single_send_cmd(codec, val);
+ return azx_single_send_cmd(bus, val);
else
- return azx_corb_send_cmd(codec, val);
+ return azx_corb_send_cmd(bus, val);
}
/* get a response */
-static unsigned int azx_get_response(struct hda_codec *codec)
+static unsigned int azx_get_response(struct hda_bus *bus)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
if (chip->single_cmd)
- return azx_single_get_response(codec);
+ return azx_single_get_response(bus);
else
- return azx_rirb_get_response(codec);
+ return azx_rirb_get_response(bus);
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
-static void azx_power_notify(struct hda_codec *codec);
+static void azx_power_notify(struct hda_bus *bus);
#endif
/* reset codec link */
return 0;
}
+/*
+ * Probe the given codec address
+ */
+static int probe_codec(struct azx *chip, int addr)
+{
+ unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) |
+ (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
+ unsigned int res;
+
+ chip->probing = 1;
+ azx_send_cmd(chip->bus, cmd);
+ res = azx_get_response(chip->bus);
+ chip->probing = 0;
+ if (res == -1)
+ return -EIO;
+ snd_printdd("hda_intel: codec #%d probed OK\n", addr);
+ return 0;
+}
+
+static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
+ struct hda_pcm *cpcm);
+static void azx_stop_chip(struct azx *chip);
/*
* Codec initialization
[AZX_DRIVER_TERA] = 1,
};
-/* number of slots to probe as default
- * this can be different from azx_max_codecs[] -- e.g. some boards
- * report wrongly the non-existing 4th slot availability
- */
-static unsigned int azx_default_codecs[AZX_NUM_DRIVERS] __devinitdata = {
- [AZX_DRIVER_ICH] = 3,
- [AZX_DRIVER_ATI] = 3,
-};
-
static int __devinit azx_codec_create(struct azx *chip, const char *model,
- unsigned int codec_probe_mask)
+ unsigned int codec_probe_mask,
+ int no_init)
{
struct hda_bus_template bus_temp;
- int c, codecs, audio_codecs, err;
- int def_slots, max_slots;
+ int c, codecs, err;
+ int max_slots;
memset(&bus_temp, 0, sizeof(bus_temp));
bus_temp.private_data = chip;
bus_temp.pci = chip->pci;
bus_temp.ops.command = azx_send_cmd;
bus_temp.ops.get_response = azx_get_response;
+ bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
#ifdef CONFIG_SND_HDA_POWER_SAVE
+ bus_temp.power_save = &power_save;
bus_temp.ops.pm_notify = azx_power_notify;
#endif
if (chip->driver_type == AZX_DRIVER_NVIDIA)
chip->bus->needs_damn_long_delay = 1;
- codecs = audio_codecs = 0;
+ codecs = 0;
max_slots = azx_max_codecs[chip->driver_type];
if (!max_slots)
max_slots = AZX_MAX_CODECS;
- def_slots = azx_default_codecs[chip->driver_type];
- if (!def_slots)
- def_slots = max_slots;
- for (c = 0; c < def_slots; c++) {
+
+ /* First try to probe all given codec slots */
+ for (c = 0; c < max_slots; c++) {
+ if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
+ if (probe_codec(chip, c) < 0) {
+ /* Some BIOSen give you wrong codec addresses
+ * that don't exist
+ */
+ snd_printk(KERN_WARNING
+ "hda_intel: Codec #%d probe error; "
+ "disabling it...\n", c);
+ chip->codec_mask &= ~(1 << c);
+ /* More badly, accessing to a non-existing
+ * codec often screws up the controller chip,
+ * and distrubs the further communications.
+ * Thus if an error occurs during probing,
+ * better to reset the controller chip to
+ * get back to the sanity state.
+ */
+ azx_stop_chip(chip);
+ azx_init_chip(chip);
+ }
+ }
+ }
+
+ /* Then create codec instances */
+ for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
struct hda_codec *codec;
- err = snd_hda_codec_new(chip->bus, c, &codec);
+ err = snd_hda_codec_new(chip->bus, c, !no_init, &codec);
if (err < 0)
continue;
codecs++;
- if (codec->afg)
- audio_codecs++;
- }
- }
- if (!audio_codecs) {
- /* probe additional slots if no codec is found */
- for (; c < max_slots; c++) {
- if ((chip->codec_mask & (1 << c)) & codec_probe_mask) {
- err = snd_hda_codec_new(chip->bus, c, NULL);
- if (err < 0)
- continue;
- codecs++;
- }
}
}
if (!codecs) {
static void azx_pcm_free(struct snd_pcm *pcm)
{
- kfree(pcm->private_data);
+ struct azx_pcm *apcm = pcm->private_data;
+ if (apcm) {
+ apcm->chip->pcm[pcm->device] = NULL;
+ kfree(apcm);
+ }
}
-static int __devinit create_codec_pcm(struct azx *chip, struct hda_codec *codec,
- struct hda_pcm *cpcm)
+static int
+azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
+ struct hda_pcm *cpcm)
{
- int err;
+ struct azx *chip = bus->private_data;
struct snd_pcm *pcm;
struct azx_pcm *apcm;
+ int pcm_dev = cpcm->device;
+ int s, err;
- /* if no substreams are defined for both playback and capture,
- * it's just a placeholder. ignore it.
- */
- if (!cpcm->stream[0].substreams && !cpcm->stream[1].substreams)
- return 0;
-
- if (snd_BUG_ON(!cpcm->name))
+ if (pcm_dev >= AZX_MAX_PCMS) {
+ snd_printk(KERN_ERR SFX "Invalid PCM device number %d\n",
+ pcm_dev);
return -EINVAL;
-
- err = snd_pcm_new(chip->card, cpcm->name, cpcm->device,
- cpcm->stream[0].substreams,
- cpcm->stream[1].substreams,
+ }
+ if (chip->pcm[pcm_dev]) {
+ snd_printk(KERN_ERR SFX "PCM %d already exists\n", pcm_dev);
+ return -EBUSY;
+ }
+ err = snd_pcm_new(chip->card, cpcm->name, pcm_dev,
+ cpcm->stream[SNDRV_PCM_STREAM_PLAYBACK].substreams,
+ cpcm->stream[SNDRV_PCM_STREAM_CAPTURE].substreams,
&pcm);
if (err < 0)
return err;
strcpy(pcm->name, cpcm->name);
- apcm = kmalloc(sizeof(*apcm), GFP_KERNEL);
+ apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
if (apcm == NULL)
return -ENOMEM;
apcm->chip = chip;
apcm->codec = codec;
- apcm->hinfo[0] = &cpcm->stream[0];
- apcm->hinfo[1] = &cpcm->stream[1];
pcm->private_data = apcm;
pcm->private_free = azx_pcm_free;
- if (cpcm->stream[0].substreams)
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &azx_pcm_ops);
- if (cpcm->stream[1].substreams)
- snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &azx_pcm_ops);
+ if (cpcm->pcm_type == HDA_PCM_TYPE_MODEM)
+ pcm->dev_class = SNDRV_PCM_CLASS_MODEM;
+ chip->pcm[pcm_dev] = pcm;
+ cpcm->pcm = pcm;
+ for (s = 0; s < 2; s++) {
+ apcm->hinfo[s] = &cpcm->stream[s];
+ if (cpcm->stream[s].substreams)
+ snd_pcm_set_ops(pcm, s, &azx_pcm_ops);
+ }
+ /* buffer pre-allocation */
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
1024 * 64, 32 * 1024 * 1024);
- chip->pcm[cpcm->device] = pcm;
- return 0;
-}
-
-static int __devinit azx_pcm_create(struct azx *chip)
-{
- static const char *dev_name[HDA_PCM_NTYPES] = {
- "Audio", "SPDIF", "HDMI", "Modem"
- };
- /* starting device index for each PCM type */
- static int dev_idx[HDA_PCM_NTYPES] = {
- [HDA_PCM_TYPE_AUDIO] = 0,
- [HDA_PCM_TYPE_SPDIF] = 1,
- [HDA_PCM_TYPE_HDMI] = 3,
- [HDA_PCM_TYPE_MODEM] = 6
- };
- /* normal audio device indices; not linear to keep compatibility */
- static int audio_idx[4] = { 0, 2, 4, 5 };
- struct hda_codec *codec;
- int c, err;
- int num_devs[HDA_PCM_NTYPES];
-
- err = snd_hda_build_pcms(chip->bus);
- if (err < 0)
- return err;
-
- /* create audio PCMs */
- memset(num_devs, 0, sizeof(num_devs));
- list_for_each_entry(codec, &chip->bus->codec_list, list) {
- for (c = 0; c < codec->num_pcms; c++) {
- struct hda_pcm *cpcm = &codec->pcm_info[c];
- int type = cpcm->pcm_type;
- switch (type) {
- case HDA_PCM_TYPE_AUDIO:
- if (num_devs[type] >= ARRAY_SIZE(audio_idx)) {
- snd_printk(KERN_WARNING
- "Too many audio devices\n");
- continue;
- }
- cpcm->device = audio_idx[num_devs[type]];
- break;
- case HDA_PCM_TYPE_SPDIF:
- case HDA_PCM_TYPE_HDMI:
- case HDA_PCM_TYPE_MODEM:
- if (num_devs[type]) {
- snd_printk(KERN_WARNING
- "%s already defined\n",
- dev_name[type]);
- continue;
- }
- cpcm->device = dev_idx[type];
- break;
- default:
- snd_printk(KERN_WARNING
- "Invalid PCM type %d\n", type);
- continue;
- }
- num_devs[type]++;
- err = create_codec_pcm(chip, codec, cpcm);
- if (err < 0)
- return err;
- }
- }
return 0;
}
#ifdef CONFIG_SND_HDA_POWER_SAVE
/* power-up/down the controller */
-static void azx_power_notify(struct hda_codec *codec)
+static void azx_power_notify(struct hda_bus *bus)
{
- struct azx *chip = codec->bus->private_data;
+ struct azx *chip = bus->private_data;
struct hda_codec *c;
int power_on = 0;
- list_for_each_entry(c, &codec->bus->codec_list, list) {
+ list_for_each_entry(c, &bus->codec_list, list) {
if (c->power_on) {
power_on = 1;
break;
/*
* power management
*/
+
+static int snd_hda_codecs_inuse(struct hda_bus *bus)
+{
+ struct hda_codec *codec;
+
+ list_for_each_entry(codec, &bus->codec_list, list) {
+ if (snd_hda_codec_needs_resume(codec))
+ return 1;
+ }
+ return 0;
+}
+
static int azx_suspend(struct pci_dev *pci, pm_message_t state)
{
struct snd_card *card = pci_get_drvdata(pci);
return 0;
}
+static int azx_resume_early(struct pci_dev *pci)
+{
+ return pci_restore_state(pci);
+}
+
static int azx_resume(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
- pci_set_power_state(pci, PCI_D0);
- pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
printk(KERN_ERR "hda-intel: pci_enable_device failed, "
"disabling device\n");
SND_PCI_QUIRK(0x1014, 0x05b7, "Thinkpad Z60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x2010, "Thinkpad X/T/R60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X/T/R61", 0x01),
+ /* broken BIOS */
+ SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
+ /* including bogus ALC268 in slot#2 that conflicts with ALC888 */
+ SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
{}
};
chip->playback_streams = ATIHDMI_NUM_PLAYBACK;
chip->capture_streams = ATIHDMI_NUM_CAPTURE;
break;
+ case AZX_DRIVER_GENERIC:
default:
chip->playback_streams = ICH6_NUM_PLAYBACK;
chip->capture_streams = ICH6_NUM_CAPTURE;
}
err = azx_create(card, pci, dev, pci_id->driver_data, &chip);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto out_free;
card->private_data = chip;
/* create codec instances */
- err = azx_codec_create(chip, model[dev], probe_mask[dev]);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ err = azx_codec_create(chip, model[dev], probe_mask[dev],
+ probe_only[dev]);
+ if (err < 0)
+ goto out_free;
/* create PCM streams */
- err = azx_pcm_create(chip);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ err = snd_hda_build_pcms(chip->bus);
+ if (err < 0)
+ goto out_free;
/* create mixer controls */
err = azx_mixer_create(chip);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto out_free;
snd_card_set_dev(card, &pci->dev);
err = snd_card_register(card);
- if (err < 0) {
- snd_card_free(card);
- return err;
- }
+ if (err < 0)
+ goto out_free;
pci_set_drvdata(pci, card);
chip->running = 1;
dev++;
return err;
+out_free:
+ snd_card_free(card);
+ return err;
}
static void __devexit azx_remove(struct pci_dev *pci)
{ PCI_DEVICE(0x10de, 0x0bd7), .driver_data = AZX_DRIVER_NVIDIA },
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA },
+ /* AMD Generic, PCI class code and Vendor ID for HD Audio */
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
+ .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
+ .class_mask = 0xffffff,
+ .driver_data = AZX_DRIVER_GENERIC },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
.remove = __devexit_p(azx_remove),
#ifdef CONFIG_PM
.suspend = azx_suspend,
+ .resume_early = azx_resume_early,
.resume = azx_resume,
#endif
};
const char *name);
int snd_hda_add_vmaster(struct hda_codec *codec, char *name,
unsigned int *tlv, const char **slaves);
+void snd_hda_codec_reset(struct hda_codec *codec);
+int snd_hda_codec_configure(struct hda_codec *codec);
/* amp value bits */
#define HDA_AMP_MUTE 0x80
static inline int snd_hda_codec_proc_new(struct hda_codec *codec) { return 0; }
#endif
+#define SND_PRINT_RATES_ADVISED_BUFSIZE 80
+void snd_print_pcm_rates(int pcm, char *buf, int buflen);
+
+#define SND_PRINT_BITS_ADVISED_BUFSIZE 16
+void snd_print_pcm_bits(int pcm, char *buf, int buflen);
+
/*
* Misc
*/
/* amp values */
#define AMP_IN_MUTE(idx) (0x7080 | ((idx)<<8))
#define AMP_IN_UNMUTE(idx) (0x7000 | ((idx)<<8))
-#define AMP_OUT_MUTE 0xb080
-#define AMP_OUT_UNMUTE 0xb000
-#define AMP_OUT_ZERO 0xb000
+#define AMP_OUT_MUTE 0xb080
+#define AMP_OUT_UNMUTE 0xb000
+#define AMP_OUT_ZERO 0xb000
/* pinctl values */
#define PIN_IN (AC_PINCTL_IN_EN)
-#define PIN_VREFHIZ (AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ)
+#define PIN_VREFHIZ (AC_PINCTL_IN_EN | AC_PINCTL_VREF_HIZ)
#define PIN_VREF50 (AC_PINCTL_IN_EN | AC_PINCTL_VREF_50)
-#define PIN_VREFGRD (AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD)
+#define PIN_VREFGRD (AC_PINCTL_IN_EN | AC_PINCTL_VREF_GRD)
#define PIN_VREF80 (AC_PINCTL_IN_EN | AC_PINCTL_VREF_80)
-#define PIN_VREF100 (AC_PINCTL_IN_EN | AC_PINCTL_VREF_100)
-#define PIN_OUT (AC_PINCTL_OUT_EN)
+#define PIN_VREF100 (AC_PINCTL_IN_EN | AC_PINCTL_VREF_100)
+#define PIN_OUT (AC_PINCTL_OUT_EN)
#define PIN_HP (AC_PINCTL_OUT_EN | AC_PINCTL_HP_EN)
#define PIN_HP_AMP (AC_PINCTL_HP_EN)
int snd_hda_override_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir,
unsigned int caps);
+int snd_hda_ctl_add(struct hda_codec *codec, struct snd_kcontrol *kctl);
+void snd_hda_ctls_clear(struct hda_codec *codec);
+
/*
* hwdep interface
*/
+#ifdef CONFIG_SND_HDA_HWDEP
int snd_hda_create_hwdep(struct hda_codec *codec);
+#else
+static inline int snd_hda_create_hwdep(struct hda_codec *codec) { return 0; }
+#endif
+
+#ifdef CONFIG_SND_HDA_RECONFIG
+int snd_hda_hwdep_add_sysfs(struct hda_codec *codec);
+#else
+static inline int snd_hda_hwdep_add_sysfs(struct hda_codec *codec)
+{
+ return 0;
+}
+#endif
/*
* power-management
#define get_amp_direction(kc) (((kc)->private_value >> 18) & 0x1)
#define get_amp_index(kc) (((kc)->private_value >> 19) & 0xf)
+/*
+ * CEA Short Audio Descriptor data
+ */
+struct cea_sad {
+ int channels;
+ int format; /* (format == 0) indicates invalid SAD */
+ int rates;
+ int sample_bits; /* for LPCM */
+ int max_bitrate; /* for AC3...ATRAC */
+ int profile; /* for WMAPRO */
+};
+
+#define ELD_FIXED_BYTES 20
+#define ELD_MAX_MNL 16
+#define ELD_MAX_SAD 16
+
+/*
+ * ELD: EDID Like Data
+ */
+struct hdmi_eld {
+ int eld_size;
+ int baseline_len;
+ int eld_ver; /* (eld_ver == 0) indicates invalid ELD */
+ int cea_edid_ver;
+ char monitor_name[ELD_MAX_MNL + 1];
+ int manufacture_id;
+ int product_id;
+ u64 port_id;
+ int support_hdcp;
+ int support_ai;
+ int conn_type;
+ int aud_synch_delay;
+ int spk_alloc;
+ int sad_count;
+ struct cea_sad sad[ELD_MAX_SAD];
+#ifdef CONFIG_PROC_FS
+ struct snd_info_entry *proc_entry;
+#endif
+};
+
+int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid);
+int snd_hdmi_get_eld(struct hdmi_eld *, struct hda_codec *, hda_nid_t);
+void snd_hdmi_show_eld(struct hdmi_eld *eld);
+
+#ifdef CONFIG_PROC_FS
+int snd_hda_eld_proc_new(struct hda_codec *codec, struct hdmi_eld *eld);
+void snd_hda_eld_proc_free(struct hda_codec *codec, struct hdmi_eld *eld);
+#else
+static inline int snd_hda_eld_proc_new(struct hda_codec *codec,
+ struct hdmi_eld *eld)
+{
+ return 0;
+}
+static inline void snd_hda_eld_proc_free(struct hda_codec *codec,
+ struct hdmi_eld *eld)
+{
+}
+#endif
+
+#define SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE 80
+void snd_print_channel_allocation(int spk_alloc, char *buf, int buflen);
+
#endif /* __SOUND_HDA_LOCAL_H */
+++ /dev/null
-/*
- * HDA Patches - included by hda_codec.c
- */
-
-/* Realtek codecs */
-extern struct hda_codec_preset snd_hda_preset_realtek[];
-/* C-Media codecs */
-extern struct hda_codec_preset snd_hda_preset_cmedia[];
-/* Analog Devices codecs */
-extern struct hda_codec_preset snd_hda_preset_analog[];
-/* SigmaTel codecs */
-extern struct hda_codec_preset snd_hda_preset_sigmatel[];
-/* SiLabs 3054/3055 modem codecs */
-extern struct hda_codec_preset snd_hda_preset_si3054[];
-/* ATI HDMI codecs */
-extern struct hda_codec_preset snd_hda_preset_atihdmi[];
-/* Conexant audio codec */
-extern struct hda_codec_preset snd_hda_preset_conexant[];
-/* VIA codecs */
-extern struct hda_codec_preset snd_hda_preset_via[];
-/* NVIDIA HDMI codecs */
-extern struct hda_codec_preset snd_hda_preset_nvhdmi[];
static void print_pcm_rates(struct snd_info_buffer *buffer, unsigned int pcm)
{
- static unsigned int rates[] = {
- 8000, 11025, 16000, 22050, 32000, 44100, 48000, 88200,
- 96000, 176400, 192000, 384000
- };
- int i;
+ char buf[SND_PRINT_RATES_ADVISED_BUFSIZE];
pcm &= AC_SUPPCM_RATES;
snd_iprintf(buffer, " rates [0x%x]:", pcm);
- for (i = 0; i < ARRAY_SIZE(rates); i++)
- if (pcm & (1 << i))
- snd_iprintf(buffer, " %d", rates[i]);
- snd_iprintf(buffer, "\n");
+ snd_print_pcm_rates(pcm, buf, sizeof(buf));
+ snd_iprintf(buffer, "%s\n", buf);
}
static void print_pcm_bits(struct snd_info_buffer *buffer, unsigned int pcm)
{
- static unsigned int bits[] = { 8, 16, 20, 24, 32 };
- int i;
+ char buf[SND_PRINT_BITS_ADVISED_BUFSIZE];
- pcm = (pcm >> 16) & 0xff;
- snd_iprintf(buffer, " bits [0x%x]:", pcm);
- for (i = 0; i < ARRAY_SIZE(bits); i++)
- if (pcm & (1 << i))
- snd_iprintf(buffer, " %d", bits[i]);
- snd_iprintf(buffer, "\n");
+ snd_iprintf(buffer, " bits [0x%x]:", (pcm >> 16) & 0xff);
+ snd_print_pcm_bits(pcm, buf, sizeof(buf));
+ snd_iprintf(buffer, "%s\n", buf);
}
static void print_pcm_formats(struct snd_info_buffer *buffer,
print_pcm_formats(buffer, stream);
}
-static const char *get_jack_location(u32 cfg)
-{
- static char *bases[7] = {
- "N/A", "Rear", "Front", "Left", "Right", "Top", "Bottom",
- };
- static unsigned char specials_idx[] = {
- 0x07, 0x08,
- 0x17, 0x18, 0x19,
- 0x37, 0x38
- };
- static char *specials[] = {
- "Rear Panel", "Drive Bar",
- "Riser", "HDMI", "ATAPI",
- "Mobile-In", "Mobile-Out"
- };
- int i;
- cfg = (cfg & AC_DEFCFG_LOCATION) >> AC_DEFCFG_LOCATION_SHIFT;
- if ((cfg & 0x0f) < 7)
- return bases[cfg & 0x0f];
- for (i = 0; i < ARRAY_SIZE(specials_idx); i++) {
- if (cfg == specials_idx[i])
- return specials[i];
- }
- return "UNKNOWN";
-}
-
static const char *get_jack_connection(u32 cfg)
{
static char *names[16] = {
int *supports_vref)
{
static char *jack_conns[4] = { "Jack", "N/A", "Fixed", "Both" };
- static char *jack_types[16] = {
- "Line Out", "Speaker", "HP Out", "CD",
- "SPDIF Out", "Digital Out", "Modem Line", "Modem Hand",
- "Line In", "Aux", "Mic", "Telephony",
- "SPDIF In", "Digitial In", "Reserved", "Other"
- };
- static char *jack_locations[4] = { "Ext", "Int", "Sep", "Oth" };
unsigned int caps, val;
caps = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
caps = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
snd_iprintf(buffer, " Pin Default 0x%08x: [%s] %s at %s %s\n", caps,
jack_conns[(caps & AC_DEFCFG_PORT_CONN) >> AC_DEFCFG_PORT_CONN_SHIFT],
- jack_types[(caps & AC_DEFCFG_DEVICE) >> AC_DEFCFG_DEVICE_SHIFT],
- jack_locations[(caps >> (AC_DEFCFG_LOCATION_SHIFT + 4)) & 3],
- get_jack_location(caps));
+ snd_hda_get_jack_type(caps),
+ snd_hda_get_jack_connectivity(caps),
+ snd_hda_get_jack_location(caps));
snd_iprintf(buffer, " Conn = %s, Color = %s\n",
get_jack_connection(caps),
get_jack_color(caps));
}
}
-static void print_realtek_coef(struct snd_info_buffer *buffer,
- struct hda_codec *codec, hda_nid_t nid)
-{
- int coeff = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_PROC_COEF, 0);
- snd_iprintf(buffer, " Processing Coefficient: 0x%02x\n", coeff);
- coeff = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_COEF_INDEX, 0);
- snd_iprintf(buffer, " Coefficient Index: 0x%02x\n", coeff);
-}
-
static void print_gpio(struct snd_info_buffer *buffer,
struct hda_codec *codec, hda_nid_t nid)
{
for (i = 0; i < max; ++i)
snd_iprintf(buffer,
" IO[%d]: enable=%d, dir=%d, wake=%d, "
- "sticky=%d, data=%d\n", i,
+ "sticky=%d, data=%d, unsol=%d\n", i,
(enable & (1<<i)) ? 1 : 0,
(direction & (1<<i)) ? 1 : 0,
(wake & (1<<i)) ? 1 : 0,
(sticky & (1<<i)) ? 1 : 0,
- (data & (1<<i)) ? 1 : 0);
+ (data & (1<<i)) ? 1 : 0,
+ (unsol & (1<<i)) ? 1 : 0);
/* FIXME: add GPO and GPI pin information */
}
struct snd_info_buffer *buffer)
{
struct hda_codec *codec = entry->private_data;
- char buf[32];
hda_nid_t nid;
int i, nodes;
- snd_hda_get_codec_name(codec, buf, sizeof(buf));
- snd_iprintf(buffer, "Codec: %s\n", buf);
+ snd_iprintf(buffer, "Codec: %s\n",
+ codec->name ? codec->name : "Not Set");
snd_iprintf(buffer, "Address: %d\n", codec->addr);
snd_iprintf(buffer, "Vendor Id: 0x%x\n", codec->vendor_id);
snd_iprintf(buffer, "Subsystem Id: 0x%x\n", codec->subsystem_id);
}
print_gpio(buffer, codec, codec->afg);
+ if (codec->proc_widget_hook)
+ codec->proc_widget_hook(buffer, codec, codec->afg);
for (i = 0; i < nodes; i++, nid++) {
unsigned int wid_caps =
if (wid_caps & AC_WCAP_PROC_WID)
print_proc_caps(buffer, codec, nid);
- /* NID 0x20 == Realtek Define Registers */
- if (codec->vendor_id == 0x10ec && nid == 0x20)
- print_realtek_coef(buffer, codec, nid);
+ if (codec->proc_widget_hook)
+ codec->proc_widget_hook(buffer, codec, nid);
}
snd_hda_power_down(codec);
}
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
struct ad198x_spec {
struct snd_kcontrol_new *mixers[5];
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
- unsigned int num_kctl_alloc, num_kctl_used;
- struct snd_kcontrol_new *kctl_alloc;
+ struct snd_array kctls;
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
NULL
};
+static void ad198x_free_kctls(struct hda_codec *codec);
+
static int ad198x_build_controls(struct hda_codec *codec)
{
struct ad198x_spec *spec = codec->spec;
return err;
}
+ ad198x_free_kctls(codec); /* no longer needed */
return 0;
}
return 0;
}
-static void ad198x_free(struct hda_codec *codec)
+static void ad198x_free_kctls(struct hda_codec *codec)
{
struct ad198x_spec *spec = codec->spec;
- unsigned int i;
- if (spec->kctl_alloc) {
- for (i = 0; i < spec->num_kctl_used; i++)
- kfree(spec->kctl_alloc[i].name);
- kfree(spec->kctl_alloc);
+ if (spec->kctls.list) {
+ struct snd_kcontrol_new *kctl = spec->kctls.list;
+ int i;
+ for (i = 0; i < spec->kctls.used; i++)
+ kfree(kctl[i].name);
}
+ snd_array_free(&spec->kctls);
+}
+
+static void ad198x_free(struct hda_codec *codec)
+{
+ struct ad198x_spec *spec = codec->spec;
+
+ if (!spec)
+ return;
+
+ ad198x_free_kctls(codec);
kfree(codec->spec);
}
};
static struct snd_kcontrol_new ad1986a_laptop_eapd_mixers[] = {
+ HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
+ HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
+ HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("PCM Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x17, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x17, 0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x13, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x13, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x12, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x12, 0x0, HDA_OUTPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .info = ad198x_mux_enum_info,
+ .get = ad198x_mux_enum_get,
+ .put = ad198x_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "External Amplifier",
+ .info = ad198x_eapd_info,
+ .get = ad198x_eapd_get,
+ .put = ad198x_eapd_put,
+ .private_value = 0x1b | (1 << 8), /* port-D, inversed */
+ },
+ { } /* end */
+};
+
+static struct snd_kcontrol_new ad1986a_samsung_mixers[] = {
HDA_BIND_VOL("Master Playback Volume", &ad1986a_laptop_master_vol),
HDA_BIND_SW("Master Playback Switch", &ad1986a_laptop_master_sw),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x03, 0x0, HDA_OUTPUT),
AD1986A_LAPTOP_EAPD,
AD1986A_LAPTOP_AUTOMUTE,
AD1986A_ULTRA,
+ AD1986A_SAMSUNG,
AD1986A_MODELS
};
[AD1986A_LAPTOP_EAPD] = "laptop-eapd",
[AD1986A_LAPTOP_AUTOMUTE] = "laptop-automute",
[AD1986A_ULTRA] = "ultra",
+ [AD1986A_SAMSUNG] = "samsung",
};
static struct snd_pci_quirk ad1986a_cfg_tbl[] = {
SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba", AD1986A_LAPTOP_EAPD),
SND_PCI_QUIRK(0x144d, 0xb03c, "Samsung R55", AD1986A_3STACK),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_LAPTOP),
- SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_LAPTOP_EAPD),
- SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_LAPTOP_EAPD),
- SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_LAPTOP_EAPD),
+ SND_PCI_QUIRK(0x144d, 0xc023, "Samsung X60", AD1986A_SAMSUNG),
+ SND_PCI_QUIRK(0x144d, 0xc024, "Samsung R65", AD1986A_SAMSUNG),
+ SND_PCI_QUIRK(0x144d, 0xc026, "Samsung X11", AD1986A_SAMSUNG),
SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_ULTRA),
SND_PCI_QUIRK(0x144d, 0xc504, "Samsung Q35", AD1986A_3STACK),
SND_PCI_QUIRK(0x17aa, 0x1011, "Lenovo M55", AD1986A_LAPTOP),
break;
case AD1986A_LAPTOP_EAPD:
spec->mixers[0] = ad1986a_laptop_eapd_mixers;
+ spec->num_init_verbs = 2;
+ spec->init_verbs[1] = ad1986a_eapd_init_verbs;
+ spec->multiout.max_channels = 2;
+ spec->multiout.num_dacs = 1;
+ spec->multiout.dac_nids = ad1986a_laptop_dac_nids;
+ if (!is_jack_available(codec, 0x25))
+ spec->multiout.dig_out_nid = 0;
+ spec->input_mux = &ad1986a_laptop_eapd_capture_source;
+ break;
+ case AD1986A_SAMSUNG:
+ spec->mixers[0] = ad1986a_samsung_mixers;
spec->num_init_verbs = 3;
spec->init_verbs[1] = ad1986a_eapd_init_verbs;
spec->init_verbs[2] = ad1986a_automic_verbs;
* Automatic parse of I/O pins from the BIOS configuration
*/
-#define NUM_CONTROL_ALLOC 32
-#define NUM_VERB_ALLOC 32
-
enum {
AD_CTL_WIDGET_VOL,
AD_CTL_WIDGET_MUTE,
{
struct snd_kcontrol_new *knew;
- if (spec->num_kctl_used >= spec->num_kctl_alloc) {
- int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
-
- knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
- if (! knew)
- return -ENOMEM;
- if (spec->kctl_alloc) {
- memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
- kfree(spec->kctl_alloc);
- }
- spec->kctl_alloc = knew;
- spec->num_kctl_alloc = num;
- }
-
- knew = &spec->kctl_alloc[spec->num_kctl_used];
+ snd_array_init(&spec->kctls, sizeof(*knew), 32);
+ knew = snd_array_new(&spec->kctls);
+ if (!knew)
+ return -ENOMEM;
*knew = ad1988_control_templates[type];
knew->name = kstrdup(name, GFP_KERNEL);
if (! knew->name)
return -ENOMEM;
knew->private_value = val;
- spec->num_kctl_used++;
return 0;
}
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = AD1988_SPDIF_IN;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->init_verbs[spec->num_init_verbs++] = ad1988_6stack_init_verbs;
static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE),
SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
+ SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x103c, 0x3614, "HP 6730s", AD1884A_LAPTOP),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_analog[] = {
+static struct hda_codec_preset snd_hda_preset_analog[] = {
{ .id = 0x11d4184a, .name = "AD1884A", .patch = patch_ad1884a },
{ .id = 0x11d41882, .name = "AD1882", .patch = patch_ad1882 },
{ .id = 0x11d41883, .name = "AD1883", .patch = patch_ad1884a },
{ .id = 0x11d4989b, .name = "AD1989B", .patch = patch_ad1988 },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:11d4*");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Analog Devices HD-audio codec");
+
+static struct hda_codec_preset_list analog_list = {
+ .preset = snd_hda_preset_analog,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_analog_init(void)
+{
+ return snd_hda_add_codec_preset(&analog_list);
+}
+
+static void __exit patch_analog_exit(void)
+{
+ snd_hda_delete_codec_preset(&analog_list);
+}
+
+module_init(patch_analog_init)
+module_exit(patch_analog_exit)
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
struct atihdmi_spec {
struct hda_multi_out multiout;
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_atihdmi[] = {
- { .id = 0x1002793c, .name = "ATI RS600 HDMI", .patch = patch_atihdmi },
- { .id = 0x10027919, .name = "ATI RS600 HDMI", .patch = patch_atihdmi },
- { .id = 0x1002791a, .name = "ATI RS690/780 HDMI", .patch = patch_atihdmi },
- { .id = 0x1002aa01, .name = "ATI R6xx HDMI", .patch = patch_atihdmi },
+static struct hda_codec_preset snd_hda_preset_atihdmi[] = {
+ { .id = 0x1002793c, .name = "RS600 HDMI", .patch = patch_atihdmi },
+ { .id = 0x10027919, .name = "RS600 HDMI", .patch = patch_atihdmi },
+ { .id = 0x1002791a, .name = "RS690/780 HDMI", .patch = patch_atihdmi },
+ { .id = 0x1002aa01, .name = "R6xx HDMI", .patch = patch_atihdmi },
{ .id = 0x10951390, .name = "SiI1390 HDMI", .patch = patch_atihdmi },
- { .id = 0x10951392, .name = "SiI1392 HDMI", .patch = patch_atihdmi },
{ .id = 0x17e80047, .name = "Chrontel HDMI", .patch = patch_atihdmi },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:1002793c");
+MODULE_ALIAS("snd-hda-codec-id:10027919");
+MODULE_ALIAS("snd-hda-codec-id:1002791a");
+MODULE_ALIAS("snd-hda-codec-id:1002aa01");
+MODULE_ALIAS("snd-hda-codec-id:10951390");
+MODULE_ALIAS("snd-hda-codec-id:17e80047");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ATI HDMI HD-audio codec");
+
+static struct hda_codec_preset_list atihdmi_list = {
+ .preset = snd_hda_preset_atihdmi,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_atihdmi_init(void)
+{
+ return snd_hda_add_codec_preset(&atihdmi_list);
+}
+
+static void __exit patch_atihdmi_exit(void)
+{
+ snd_hda_delete_codec_preset(&atihdmi_list);
+}
+
+module_init(patch_atihdmi_init)
+module_exit(patch_atihdmi_exit)
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
#define NUM_PINS 11
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_cmedia[] = {
+static struct hda_codec_preset snd_hda_preset_cmedia[] = {
{ .id = 0x13f69880, .name = "CMI9880", .patch = patch_cmi9880 },
{ .id = 0x434d4980, .name = "CMI9880", .patch = patch_cmi9880 },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:13f69880");
+MODULE_ALIAS("snd-hda-codec-id:434d4980");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("C-Media HD-audio codec");
+
+static struct hda_codec_preset_list cmedia_list = {
+ .preset = snd_hda_preset_cmedia,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_cmedia_init(void)
+{
+ return snd_hda_add_codec_preset(&cmedia_list);
+}
+
+static void __exit patch_cmedia_exit(void)
+{
+ snd_hda_delete_codec_preset(&cmedia_list);
+}
+
+module_init(patch_cmedia_init)
+module_exit(patch_cmedia_exit)
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
#define CXT_PIN_DIR_IN 0x00
#define CXT_PIN_DIR_OUT 0x01
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
- unsigned int num_kctl_alloc, num_kctl_used;
- struct snd_kcontrol_new *kctl_alloc;
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
static void conexant_free(struct hda_codec *codec)
{
- struct conexant_spec *spec = codec->spec;
- unsigned int i;
-
- if (spec->kctl_alloc) {
- for (i = 0; i < spec->num_kctl_used; i++)
- kfree(spec->kctl_alloc[i].name);
- kfree(spec->kctl_alloc);
- }
-
kfree(codec->spec);
}
/*
*/
-struct hda_codec_preset snd_hda_preset_conexant[] = {
+static struct hda_codec_preset snd_hda_preset_conexant[] = {
{ .id = 0x14f15045, .name = "CX20549 (Venice)",
.patch = patch_cxt5045 },
{ .id = 0x14f15047, .name = "CX20551 (Waikiki)",
.patch = patch_cxt5051 },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:14f15045");
+MODULE_ALIAS("snd-hda-codec-id:14f15047");
+MODULE_ALIAS("snd-hda-codec-id:14f15051");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Conexant HD-audio codec");
+
+static struct hda_codec_preset_list conexant_list = {
+ .preset = snd_hda_preset_conexant,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_conexant_init(void)
+{
+ return snd_hda_add_codec_preset(&conexant_list);
+}
+
+static void __exit patch_conexant_exit(void)
+{
+ snd_hda_delete_codec_preset(&conexant_list);
+}
+
+module_init(patch_conexant_init)
+module_exit(patch_conexant_exit)
--- /dev/null
+/*
+ *
+ * patch_intelhdmi.c - Patch for Intel HDMI codecs
+ *
+ * Copyright(c) 2008 Intel Corporation. All rights reserved.
+ *
+ * Authors:
+ * Jiang Zhe <zhe.jiang@intel.com>
+ * Wu Fengguang <wfg@linux.intel.com>
+ *
+ * Maintained by:
+ * Wu Fengguang <wfg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include "hda_codec.h"
+#include "hda_local.h"
+
+#define CVT_NID 0x02 /* audio converter */
+#define PIN_NID 0x03 /* HDMI output pin */
+
+#define INTEL_HDMI_EVENT_TAG 0x08
+
+struct intel_hdmi_spec {
+ struct hda_multi_out multiout;
+ struct hda_pcm pcm_rec;
+ struct hdmi_eld sink_eld;
+};
+
+static struct hda_verb pinout_enable_verb[] = {
+ {PIN_NID, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {} /* terminator */
+};
+
+static struct hda_verb pinout_disable_verb[] = {
+ {PIN_NID, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00},
+ {}
+};
+
+static struct hda_verb unsolicited_response_verb[] = {
+ {PIN_NID, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN |
+ INTEL_HDMI_EVENT_TAG},
+ {}
+};
+
+static struct hda_verb def_chan_map[] = {
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x00},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x11},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x22},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x33},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x44},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x55},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x66},
+ {CVT_NID, AC_VERB_SET_HDMI_CHAN_SLOT, 0x77},
+ {}
+};
+
+
+struct hdmi_audio_infoframe {
+ u8 type; /* 0x84 */
+ u8 ver; /* 0x01 */
+ u8 len; /* 0x0a */
+
+ u8 checksum; /* PB0 */
+ u8 CC02_CT47; /* CC in bits 0:2, CT in 4:7 */
+ u8 SS01_SF24;
+ u8 CXT04;
+ u8 CA;
+ u8 LFEPBL01_LSV36_DM_INH7;
+ u8 reserved[5]; /* PB6 - PB10 */
+};
+
+/*
+ * CEA speaker placement:
+ *
+ * FLH FCH FRH
+ * FLW FL FLC FC FRC FR FRW
+ *
+ * LFE
+ * TC
+ *
+ * RL RLC RC RRC RR
+ *
+ * The Left/Right Surround channel _notions_ LS/RS in SMPTE 320M corresponds to
+ * CEA RL/RR; The SMPTE channel _assignment_ C/LFE is swapped to CEA LFE/FC.
+ */
+enum cea_speaker_placement {
+ FL = (1 << 0), /* Front Left */
+ FC = (1 << 1), /* Front Center */
+ FR = (1 << 2), /* Front Right */
+ FLC = (1 << 3), /* Front Left Center */
+ FRC = (1 << 4), /* Front Right Center */
+ RL = (1 << 5), /* Rear Left */
+ RC = (1 << 6), /* Rear Center */
+ RR = (1 << 7), /* Rear Right */
+ RLC = (1 << 8), /* Rear Left Center */
+ RRC = (1 << 9), /* Rear Right Center */
+ LFE = (1 << 10), /* Low Frequency Effect */
+ FLW = (1 << 11), /* Front Left Wide */
+ FRW = (1 << 12), /* Front Right Wide */
+ FLH = (1 << 13), /* Front Left High */
+ FCH = (1 << 14), /* Front Center High */
+ FRH = (1 << 15), /* Front Right High */
+ TC = (1 << 16), /* Top Center */
+};
+
+/*
+ * ELD SA bits in the CEA Speaker Allocation data block
+ */
+static int eld_speaker_allocation_bits[] = {
+ [0] = FL | FR,
+ [1] = LFE,
+ [2] = FC,
+ [3] = RL | RR,
+ [4] = RC,
+ [5] = FLC | FRC,
+ [6] = RLC | RRC,
+ /* the following are not defined in ELD yet */
+ [7] = FLW | FRW,
+ [8] = FLH | FRH,
+ [9] = TC,
+ [10] = FCH,
+};
+
+struct cea_channel_speaker_allocation {
+ int ca_index;
+ int speakers[8];
+
+ /* derived values, just for convenience */
+ int channels;
+ int spk_mask;
+};
+
+/*
+ * This is an ordered list!
+ *
+ * The preceding ones have better chances to be selected by
+ * hdmi_setup_channel_allocation().
+ */
+static struct cea_channel_speaker_allocation channel_allocations[] = {
+/* channel: 8 7 6 5 4 3 2 1 */
+{ .ca_index = 0x00, .speakers = { 0, 0, 0, 0, 0, 0, FR, FL } },
+ /* 2.1 */
+{ .ca_index = 0x01, .speakers = { 0, 0, 0, 0, 0, LFE, FR, FL } },
+ /* Dolby Surround */
+{ .ca_index = 0x02, .speakers = { 0, 0, 0, 0, FC, 0, FR, FL } },
+{ .ca_index = 0x03, .speakers = { 0, 0, 0, 0, FC, LFE, FR, FL } },
+{ .ca_index = 0x04, .speakers = { 0, 0, 0, RC, 0, 0, FR, FL } },
+{ .ca_index = 0x05, .speakers = { 0, 0, 0, RC, 0, LFE, FR, FL } },
+{ .ca_index = 0x06, .speakers = { 0, 0, 0, RC, FC, 0, FR, FL } },
+{ .ca_index = 0x07, .speakers = { 0, 0, 0, RC, FC, LFE, FR, FL } },
+{ .ca_index = 0x08, .speakers = { 0, 0, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x09, .speakers = { 0, 0, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x0a, .speakers = { 0, 0, RR, RL, FC, 0, FR, FL } },
+ /* 5.1 */
+{ .ca_index = 0x0b, .speakers = { 0, 0, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x0c, .speakers = { 0, RC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x0d, .speakers = { 0, RC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x0e, .speakers = { 0, RC, RR, RL, FC, 0, FR, FL } },
+ /* 6.1 */
+{ .ca_index = 0x0f, .speakers = { 0, RC, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x10, .speakers = { RRC, RLC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x11, .speakers = { RRC, RLC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x12, .speakers = { RRC, RLC, RR, RL, FC, 0, FR, FL } },
+ /* 7.1 */
+{ .ca_index = 0x13, .speakers = { RRC, RLC, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x14, .speakers = { FRC, FLC, 0, 0, 0, 0, FR, FL } },
+{ .ca_index = 0x15, .speakers = { FRC, FLC, 0, 0, 0, LFE, FR, FL } },
+{ .ca_index = 0x16, .speakers = { FRC, FLC, 0, 0, FC, 0, FR, FL } },
+{ .ca_index = 0x17, .speakers = { FRC, FLC, 0, 0, FC, LFE, FR, FL } },
+{ .ca_index = 0x18, .speakers = { FRC, FLC, 0, RC, 0, 0, FR, FL } },
+{ .ca_index = 0x19, .speakers = { FRC, FLC, 0, RC, 0, LFE, FR, FL } },
+{ .ca_index = 0x1a, .speakers = { FRC, FLC, 0, RC, FC, 0, FR, FL } },
+{ .ca_index = 0x1b, .speakers = { FRC, FLC, 0, RC, FC, LFE, FR, FL } },
+{ .ca_index = 0x1c, .speakers = { FRC, FLC, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x1d, .speakers = { FRC, FLC, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x1e, .speakers = { FRC, FLC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x1f, .speakers = { FRC, FLC, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x20, .speakers = { 0, FCH, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x21, .speakers = { 0, FCH, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x22, .speakers = { TC, 0, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x23, .speakers = { TC, 0, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x24, .speakers = { FRH, FLH, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x25, .speakers = { FRH, FLH, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x26, .speakers = { FRW, FLW, RR, RL, 0, 0, FR, FL } },
+{ .ca_index = 0x27, .speakers = { FRW, FLW, RR, RL, 0, LFE, FR, FL } },
+{ .ca_index = 0x28, .speakers = { TC, RC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x29, .speakers = { TC, RC, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x2a, .speakers = { FCH, RC, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x2b, .speakers = { FCH, RC, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x2c, .speakers = { TC, FCH, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x2d, .speakers = { TC, FCH, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x2e, .speakers = { FRH, FLH, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x2f, .speakers = { FRH, FLH, RR, RL, FC, LFE, FR, FL } },
+{ .ca_index = 0x30, .speakers = { FRW, FLW, RR, RL, FC, 0, FR, FL } },
+{ .ca_index = 0x31, .speakers = { FRW, FLW, RR, RL, FC, LFE, FR, FL } },
+};
+
+/*
+ * HDMI routines
+ */
+
+#ifdef BE_PARANOID
+static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t nid,
+ int *packet_index, int *byte_index)
+{
+ int val;
+
+ val = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_INDEX, 0);
+
+ *packet_index = val >> 5;
+ *byte_index = val & 0x1f;
+}
+#endif
+
+static void hdmi_set_dip_index(struct hda_codec *codec, hda_nid_t nid,
+ int packet_index, int byte_index)
+{
+ int val;
+
+ val = (packet_index << 5) | (byte_index & 0x1f);
+
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
+}
+
+static void hdmi_write_dip_byte(struct hda_codec *codec, hda_nid_t nid,
+ unsigned char val)
+{
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_HDMI_DIP_DATA, val);
+}
+
+static void hdmi_enable_output(struct hda_codec *codec)
+{
+ /* Enable Audio InfoFrame Transmission */
+ hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+ snd_hda_codec_write(codec, PIN_NID, 0, AC_VERB_SET_HDMI_DIP_XMIT,
+ AC_DIPXMIT_BEST);
+ /* Unmute */
+ if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, PIN_NID, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
+ /* Enable pin out */
+ snd_hda_sequence_write(codec, pinout_enable_verb);
+}
+
+static void hdmi_disable_output(struct hda_codec *codec)
+{
+ snd_hda_sequence_write(codec, pinout_disable_verb);
+ if (get_wcaps(codec, PIN_NID) & AC_WCAP_OUT_AMP)
+ snd_hda_codec_write(codec, PIN_NID, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+
+ /*
+ * FIXME: noises may arise when playing music after reloading the
+ * kernel module, until the next X restart or monitor repower.
+ */
+}
+
+static int hdmi_get_channel_count(struct hda_codec *codec)
+{
+ return 1 + snd_hda_codec_read(codec, CVT_NID, 0,
+ AC_VERB_GET_CVT_CHAN_COUNT, 0);
+}
+
+static void hdmi_set_channel_count(struct hda_codec *codec, int chs)
+{
+ snd_hda_codec_write(codec, CVT_NID, 0,
+ AC_VERB_SET_CVT_CHAN_COUNT, chs - 1);
+
+ if (chs != hdmi_get_channel_count(codec))
+ snd_printd(KERN_INFO "HDMI channel count: expect %d, get %d\n",
+ chs, hdmi_get_channel_count(codec));
+}
+
+static void hdmi_debug_channel_mapping(struct hda_codec *codec)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ int i;
+ int slot;
+
+ for (i = 0; i < 8; i++) {
+ slot = snd_hda_codec_read(codec, CVT_NID, 0,
+ AC_VERB_GET_HDMI_CHAN_SLOT, i);
+ printk(KERN_DEBUG "HDMI: ASP channel %d => slot %d\n",
+ slot >> 4, slot & 0x7);
+ }
+#endif
+}
+
+static void hdmi_parse_eld(struct hda_codec *codec)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+ struct hdmi_eld *eld = &spec->sink_eld;
+
+ if (!snd_hdmi_get_eld(eld, codec, PIN_NID))
+ snd_hdmi_show_eld(eld);
+}
+
+
+/*
+ * Audio InfoFrame routines
+ */
+
+static void hdmi_debug_dip_size(struct hda_codec *codec)
+{
+#ifdef CONFIG_SND_DEBUG_VERBOSE
+ int i;
+ int size;
+
+ size = snd_hdmi_get_eld_size(codec, PIN_NID);
+ printk(KERN_DEBUG "HDMI: ELD buf size is %d\n", size);
+
+ for (i = 0; i < 8; i++) {
+ size = snd_hda_codec_read(codec, PIN_NID, 0,
+ AC_VERB_GET_HDMI_DIP_SIZE, i);
+ printk(KERN_DEBUG "HDMI: DIP GP[%d] buf size is %d\n", i, size);
+ }
+#endif
+}
+
+static void hdmi_clear_dip_buffers(struct hda_codec *codec)
+{
+#ifdef BE_PARANOID
+ int i, j;
+ int size;
+ int pi, bi;
+ for (i = 0; i < 8; i++) {
+ size = snd_hda_codec_read(codec, PIN_NID, 0,
+ AC_VERB_GET_HDMI_DIP_SIZE, i);
+ if (size == 0)
+ continue;
+
+ hdmi_set_dip_index(codec, PIN_NID, i, 0x0);
+ for (j = 1; j < 1000; j++) {
+ hdmi_write_dip_byte(codec, PIN_NID, 0x0);
+ hdmi_get_dip_index(codec, PIN_NID, &pi, &bi);
+ if (pi != i)
+ snd_printd(KERN_INFO "dip index %d: %d != %d\n",
+ bi, pi, i);
+ if (bi == 0) /* byte index wrapped around */
+ break;
+ }
+ snd_printd(KERN_INFO
+ "HDMI: DIP GP[%d] buf reported size=%d, written=%d\n",
+ i, size, j);
+ }
+#endif
+}
+
+static void hdmi_fill_audio_infoframe(struct hda_codec *codec,
+ struct hdmi_audio_infoframe *ai)
+{
+ u8 *params = (u8 *)ai;
+ int i;
+
+ hdmi_debug_dip_size(codec);
+ hdmi_clear_dip_buffers(codec); /* be paranoid */
+
+ hdmi_set_dip_index(codec, PIN_NID, 0x0, 0x0);
+ for (i = 0; i < sizeof(ai); i++)
+ hdmi_write_dip_byte(codec, PIN_NID, params[i]);
+}
+
+/*
+ * Compute derived values in channel_allocations[].
+ */
+static void init_channel_allocations(void)
+{
+ int i, j;
+ struct cea_channel_speaker_allocation *p;
+
+ for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+ p = channel_allocations + i;
+ p->channels = 0;
+ p->spk_mask = 0;
+ for (j = 0; j < ARRAY_SIZE(p->speakers); j++)
+ if (p->speakers[j]) {
+ p->channels++;
+ p->spk_mask |= p->speakers[j];
+ }
+ }
+}
+
+/*
+ * The transformation takes two steps:
+ *
+ * eld->spk_alloc => (eld_speaker_allocation_bits[]) => spk_mask
+ * spk_mask => (channel_allocations[]) => ai->CA
+ *
+ * TODO: it could select the wrong CA from multiple candidates.
+*/
+static int hdmi_setup_channel_allocation(struct hda_codec *codec,
+ struct hdmi_audio_infoframe *ai)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+ struct hdmi_eld *eld = &spec->sink_eld;
+ int i;
+ int spk_mask = 0;
+ int channels = 1 + (ai->CC02_CT47 & 0x7);
+ char buf[SND_PRINT_CHANNEL_ALLOCATION_ADVISED_BUFSIZE];
+
+ /*
+ * CA defaults to 0 for basic stereo audio
+ */
+ if (!eld->eld_ver)
+ return 0;
+ if (!eld->spk_alloc)
+ return 0;
+ if (channels <= 2)
+ return 0;
+
+ /*
+ * expand ELD's speaker allocation mask
+ *
+ * ELD tells the speaker mask in a compact(paired) form,
+ * expand ELD's notions to match the ones used by Audio InfoFrame.
+ */
+ for (i = 0; i < ARRAY_SIZE(eld_speaker_allocation_bits); i++) {
+ if (eld->spk_alloc & (1 << i))
+ spk_mask |= eld_speaker_allocation_bits[i];
+ }
+
+ /* search for the first working match in the CA table */
+ for (i = 0; i < ARRAY_SIZE(channel_allocations); i++) {
+ if (channels == channel_allocations[i].channels &&
+ (spk_mask & channel_allocations[i].spk_mask) ==
+ channel_allocations[i].spk_mask) {
+ ai->CA = channel_allocations[i].ca_index;
+ break;
+ }
+ }
+
+ snd_print_channel_allocation(eld->spk_alloc, buf, sizeof(buf));
+ snd_printdd(KERN_INFO
+ "HDMI: select CA 0x%x for %d-channel allocation: %s\n",
+ ai->CA, channels, buf);
+
+ return ai->CA;
+}
+
+static void hdmi_setup_channel_mapping(struct hda_codec *codec,
+ struct hdmi_audio_infoframe *ai)
+{
+ if (!ai->CA)
+ return;
+
+ /*
+ * TODO: adjust channel mapping if necessary
+ * ALSA sequence is front/surr/clfe/side?
+ */
+
+ snd_hda_sequence_write(codec, def_chan_map);
+ hdmi_debug_channel_mapping(codec);
+}
+
+
+static void hdmi_setup_audio_infoframe(struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct hdmi_audio_infoframe ai = {
+ .type = 0x84,
+ .ver = 0x01,
+ .len = 0x0a,
+ .CC02_CT47 = substream->runtime->channels - 1,
+ };
+
+ hdmi_setup_channel_allocation(codec, &ai);
+ hdmi_setup_channel_mapping(codec, &ai);
+
+ hdmi_fill_audio_infoframe(codec, &ai);
+}
+
+
+/*
+ * Unsolicited events
+ */
+
+static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+ int pind = !!(res & AC_UNSOL_RES_PD);
+ int eldv = !!(res & AC_UNSOL_RES_ELDV);
+
+ printk(KERN_INFO
+ "HDMI hot plug event: Presence_Detect=%d ELD_Valid=%d\n",
+ pind, eldv);
+
+ if (pind && eldv) {
+ hdmi_parse_eld(codec);
+ /* TODO: do real things about ELD */
+ }
+}
+
+static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res)
+{
+ int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+ int cp_state = !!(res & AC_UNSOL_RES_CP_STATE);
+ int cp_ready = !!(res & AC_UNSOL_RES_CP_READY);
+
+ printk(KERN_INFO
+ "HDMI content protection event: SUBTAG=0x%x CP_STATE=%d CP_READY=%d\n",
+ subtag,
+ cp_state,
+ cp_ready);
+
+ /* TODO */
+ if (cp_state)
+ ;
+ if (cp_ready)
+ ;
+}
+
+
+static void intel_hdmi_unsol_event(struct hda_codec *codec, unsigned int res)
+{
+ int tag = res >> AC_UNSOL_RES_TAG_SHIFT;
+ int subtag = (res & AC_UNSOL_RES_SUBTAG) >> AC_UNSOL_RES_SUBTAG_SHIFT;
+
+ if (tag != INTEL_HDMI_EVENT_TAG) {
+ snd_printd(KERN_INFO "Unexpected HDMI event tag 0x%x\n", tag);
+ return;
+ }
+
+ if (subtag == 0)
+ hdmi_intrinsic_event(codec, res);
+ else
+ hdmi_non_intrinsic_event(codec, res);
+}
+
+/*
+ * Callbacks
+ */
+
+static int intel_hdmi_playback_pcm_open(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+
+ return snd_hda_multi_out_dig_open(codec, &spec->multiout);
+}
+
+static int intel_hdmi_playback_pcm_close(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ struct snd_pcm_substream *substream)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+
+ hdmi_disable_output(codec);
+
+ return snd_hda_multi_out_dig_close(codec, &spec->multiout);
+}
+
+static int intel_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
+ struct hda_codec *codec,
+ unsigned int stream_tag,
+ unsigned int format,
+ struct snd_pcm_substream *substream)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+
+ snd_hda_multi_out_dig_prepare(codec, &spec->multiout, stream_tag,
+ format, substream);
+
+ hdmi_set_channel_count(codec, substream->runtime->channels);
+
+ hdmi_setup_audio_infoframe(codec, substream);
+
+ hdmi_enable_output(codec);
+
+ return 0;
+}
+
+static struct hda_pcm_stream intel_hdmi_pcm_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 8,
+ .nid = CVT_NID, /* NID to query formats and rates and setup streams */
+ .ops = {
+ .open = intel_hdmi_playback_pcm_open,
+ .close = intel_hdmi_playback_pcm_close,
+ .prepare = intel_hdmi_playback_pcm_prepare
+ },
+};
+
+static int intel_hdmi_build_pcms(struct hda_codec *codec)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+ struct hda_pcm *info = &spec->pcm_rec;
+
+ codec->num_pcms = 1;
+ codec->pcm_info = info;
+
+ info->name = "INTEL HDMI";
+ info->pcm_type = HDA_PCM_TYPE_HDMI;
+ info->stream[SNDRV_PCM_STREAM_PLAYBACK] = intel_hdmi_pcm_playback;
+
+ return 0;
+}
+
+static int intel_hdmi_build_controls(struct hda_codec *codec)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+ int err;
+
+ err = snd_hda_create_spdif_out_ctls(codec, spec->multiout.dig_out_nid);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+static int intel_hdmi_init(struct hda_codec *codec)
+{
+ /* disable audio output as early as possible */
+ hdmi_disable_output(codec);
+
+ snd_hda_sequence_write(codec, unsolicited_response_verb);
+
+ return 0;
+}
+
+static void intel_hdmi_free(struct hda_codec *codec)
+{
+ struct intel_hdmi_spec *spec = codec->spec;
+
+ snd_hda_eld_proc_free(codec, &spec->sink_eld);
+ kfree(spec);
+}
+
+static struct hda_codec_ops intel_hdmi_patch_ops = {
+ .init = intel_hdmi_init,
+ .free = intel_hdmi_free,
+ .build_pcms = intel_hdmi_build_pcms,
+ .build_controls = intel_hdmi_build_controls,
+ .unsol_event = intel_hdmi_unsol_event,
+};
+
+static int patch_intel_hdmi(struct hda_codec *codec)
+{
+ struct intel_hdmi_spec *spec;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (spec == NULL)
+ return -ENOMEM;
+
+ spec->multiout.num_dacs = 0; /* no analog */
+ spec->multiout.max_channels = 8;
+ spec->multiout.dig_out_nid = CVT_NID;
+
+ codec->spec = spec;
+ codec->patch_ops = intel_hdmi_patch_ops;
+
+ snd_hda_eld_proc_new(codec, &spec->sink_eld);
+
+ init_channel_allocations();
+
+ return 0;
+}
+
+static struct hda_codec_preset snd_hda_preset_intelhdmi[] = {
+ { .id = 0x808629fb, .name = "G45 DEVCL", .patch = patch_intel_hdmi },
+ { .id = 0x80862801, .name = "G45 DEVBLC", .patch = patch_intel_hdmi },
+ { .id = 0x80862802, .name = "G45 DEVCTG", .patch = patch_intel_hdmi },
+ { .id = 0x80862803, .name = "G45 DEVELK", .patch = patch_intel_hdmi },
+ { .id = 0x10951392, .name = "SiI1392 HDMI", .patch = patch_intel_hdmi },
+ {} /* terminator */
+};
+
+MODULE_ALIAS("snd-hda-codec-id:808629fb");
+MODULE_ALIAS("snd-hda-codec-id:80862801");
+MODULE_ALIAS("snd-hda-codec-id:80862802");
+MODULE_ALIAS("snd-hda-codec-id:80862803");
+MODULE_ALIAS("snd-hda-codec-id:10951392");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Intel HDMI HD-audio codec");
+
+static struct hda_codec_preset_list intel_list = {
+ .preset = snd_hda_preset_intelhdmi,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_intelhdmi_init(void)
+{
+ return snd_hda_add_codec_preset(&intel_list);
+}
+
+static void __exit patch_intelhdmi_exit(void)
+{
+ snd_hda_delete_codec_preset(&intel_list);
+}
+
+module_init(patch_intelhdmi_init)
+module_exit(patch_intelhdmi_exit)
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
- { .id = 0x10de0002, .name = "NVIDIA MCP78 HDMI", .patch = patch_nvhdmi },
- { .id = 0x10de0007, .name = "NVIDIA MCP7A HDMI", .patch = patch_nvhdmi },
+static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
+ { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
+ { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
+ { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:10de0002");
+MODULE_ALIAS("snd-hda-codec-id:10de0007");
+MODULE_ALIAS("snd-hda-codec-id:10de0067");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Nvidia HDMI HD-audio codec");
+
+static struct hda_codec_preset_list nvhdmi_list = {
+ .preset = snd_hda_preset_nvhdmi,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_nvhdmi_init(void)
+{
+ return snd_hda_add_codec_preset(&nvhdmi_list);
+}
+
+static void __exit patch_nvhdmi_exit(void)
+{
+ snd_hda_delete_codec_preset(&nvhdmi_list);
+}
+
+module_init(patch_nvhdmi_init)
+module_exit(patch_nvhdmi_exit)
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
#define ALC880_FRONT_EVENT 0x01
#define ALC880_DCVOL_EVENT 0x02
ALC268_3ST,
ALC268_TOSHIBA,
ALC268_ACER,
+ ALC268_ACER_DMIC,
ALC268_ACER_ASPIRE_ONE,
ALC268_DELL,
ALC268_ZEPTO,
ALC269_QUANTA_FL1,
ALC269_ASUS_EEEPC_P703,
ALC269_ASUS_EEEPC_P901,
+ ALC269_FUJITSU,
+ ALC269_LIFEBOOK,
ALC269_AUTO,
ALC269_MODEL_LAST /* last tag */
};
enum {
ALC660VD_3ST,
ALC660VD_3ST_DIG,
+ ALC660VD_ASUS_V1S,
ALC861VD_3ST,
ALC861VD_3ST_DIG,
ALC861VD_6ST_DIG,
ALC883_TARGA_2ch_DIG,
ALC883_ACER,
ALC883_ACER_ASPIRE,
+ ALC888_ACER_ASPIRE_4930G,
ALC883_MEDION,
ALC883_MEDION_MD2,
ALC883_LAPTOP_EAPD,
ALC883_MITAC,
ALC883_CLEVO_M720,
ALC883_FUJITSU_PI2515,
+ ALC888_FUJITSU_XA3530,
ALC883_3ST_6ch_INTEL,
ALC888_ASUS_M90V,
ALC888_ASUS_EEE1601,
+ ALC1200_ASUS_P5Q,
ALC883_AUTO,
ALC883_MODEL_LAST,
};
/* codec parameterization */
struct snd_kcontrol_new *mixers[5]; /* mixer arrays */
unsigned int num_mixers;
+ struct snd_kcontrol_new *cap_mixer; /* capture mixer */
const struct hda_verb *init_verbs[5]; /* initialization verbs
* don't forget NULL
hda_nid_t *adc_nids;
hda_nid_t *capsrc_nids;
hda_nid_t dig_in_nid; /* digital-in NID; optional */
+ unsigned char is_mix_capture; /* matrix-style capture (non-mux) */
/* capture source */
unsigned int num_mux_defs;
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
- unsigned int num_kctl_alloc, num_kctl_used;
- struct snd_kcontrol_new *kctl_alloc;
+ struct snd_array kctls;
struct hda_input_mux private_imux;
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
struct snd_kcontrol_new *mixers[5]; /* should be identical size
* with spec
*/
+ struct snd_kcontrol_new *cap_mixer; /* capture mixer */
const struct hda_verb *init_verbs[5];
unsigned int num_dacs;
hda_nid_t *dac_nids;
{
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux;
unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- unsigned int mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
+ unsigned int mux_idx;
hda_nid_t nid = spec->capsrc_nids ?
spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
- return snd_hda_input_mux_put(codec, &spec->input_mux[mux_idx], ucontrol,
- nid, &spec->cur_mux[adc_idx]);
-}
+ mux_idx = adc_idx >= spec->num_mux_defs ? 0 : adc_idx;
+ imux = &spec->input_mux[mux_idx];
+
+ if (spec->is_mix_capture) {
+ /* Matrix-mixer style (e.g. ALC882) */
+ unsigned int *cur_val = &spec->cur_mux[adc_idx];
+ unsigned int i, idx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+ idx = imux->num_items - 1;
+ if (*cur_val == idx)
+ return 0;
+ for (i = 0; i < imux->num_items; i++) {
+ unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
+ snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
+ imux->items[i].index,
+ HDA_AMP_MUTE, v);
+ }
+ *cur_val = idx;
+ return 1;
+ } else {
+ /* MUX style (e.g. ALC880) */
+ return snd_hda_input_mux_put(codec, imux, ucontrol, nid,
+ &spec->cur_mux[adc_idx]);
+ }
+}
/*
* channel mode setting
.private_value = nid | (mask<<16) }
#endif /* CONFIG_SND_DEBUG */
+/*
+ */
+static void add_mixer(struct alc_spec *spec, struct snd_kcontrol_new *mix)
+{
+ if (snd_BUG_ON(spec->num_mixers >= ARRAY_SIZE(spec->mixers)))
+ return;
+ spec->mixers[spec->num_mixers++] = mix;
+}
+
+static void add_verb(struct alc_spec *spec, const struct hda_verb *verb)
+{
+ if (snd_BUG_ON(spec->num_init_verbs >= ARRAY_SIZE(spec->init_verbs)))
+ return;
+ spec->init_verbs[spec->num_init_verbs++] = verb;
+}
+
+#ifdef CONFIG_PROC_FS
+/*
+ * hook for proc
+ */
+static void print_realtek_coef(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ int coeff;
+
+ if (nid != 0x20)
+ return;
+ coeff = snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PROC_COEF, 0);
+ snd_iprintf(buffer, " Processing Coefficient: 0x%02x\n", coeff);
+ coeff = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_COEF_INDEX, 0);
+ snd_iprintf(buffer, " Coefficient Index: 0x%02x\n", coeff);
+}
+#else
+#define print_realtek_coef NULL
+#endif
+
/*
* set up from the preset table
*/
int i;
for (i = 0; i < ARRAY_SIZE(preset->mixers) && preset->mixers[i]; i++)
- spec->mixers[spec->num_mixers++] = preset->mixers[i];
+ add_mixer(spec, preset->mixers[i]);
+ spec->cap_mixer = preset->cap_mixer;
for (i = 0; i < ARRAY_SIZE(preset->init_verbs) && preset->init_verbs[i];
i++)
- spec->init_verbs[spec->num_init_verbs++] =
- preset->init_verbs[i];
+ add_verb(spec, preset->init_verbs[i]);
spec->channel_mode = preset->channel_mode;
spec->num_channel_mode = preset->num_channel_mode;
}
}
+/*
+ * ALC888
+ */
+
+/*
+ * 2ch mode
+ */
+static struct hda_verb alc888_4ST_ch2_intel_init[] = {
+/* Mic-in jack as mic in */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+/* Line-in jack as Line in */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+/* Line-Out as Front */
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
+ { } /* end */
+};
+
+/*
+ * 4ch mode
+ */
+static struct hda_verb alc888_4ST_ch4_intel_init[] = {
+/* Mic-in jack as mic in */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80 },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE },
+/* Line-in jack as Surround */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+/* Line-Out as Front */
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x00},
+ { } /* end */
+};
+
+/*
+ * 6ch mode
+ */
+static struct hda_verb alc888_4ST_ch6_intel_init[] = {
+/* Mic-in jack as CLFE */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+/* Line-in jack as Surround */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+/* Line-Out as CLFE (workaround because Mic-in is not loud enough) */
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ { } /* end */
+};
+
+/*
+ * 8ch mode
+ */
+static struct hda_verb alc888_4ST_ch8_intel_init[] = {
+/* Mic-in jack as CLFE */
+ { 0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+/* Line-in jack as Surround */
+ { 0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT },
+ { 0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE },
+/* Line-Out as Side */
+ { 0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+ { } /* end */
+};
+
+static struct hda_channel_mode alc888_4ST_8ch_intel_modes[4] = {
+ { 2, alc888_4ST_ch2_intel_init },
+ { 4, alc888_4ST_ch4_intel_init },
+ { 6, alc888_4ST_ch6_intel_init },
+ { 8, alc888_4ST_ch8_intel_init },
+};
+
+/*
+ * ALC888 Fujitsu Siemens Amillo xa3530
+ */
+
+static struct hda_verb alc888_fujitsu_xa3530_verbs[] = {
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Connect Internal HP to Front */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect Bass HP to Front */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect Line-Out side jack (SPDIF) to Side */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x03},
+/* Connect Mic jack to CLFE */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x18, AC_VERB_SET_CONNECT_SEL, 0x02},
+/* Connect Line-in jack to Surround */
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+/* Connect HP out jack to Front */
+ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1b, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Enable unsolicited event for HP jack and Line-out jack */
+ {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x17, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {}
+};
+
+static void alc888_fujitsu_xa3530_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned int bits;
+ /* Line out presence */
+ present = snd_hda_codec_read(codec, 0x17, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ /* HP out presence */
+ present = present || snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? HDA_AMP_MUTE : 0;
+ /* Toggle internal speakers muting */
+ snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, bits);
+ /* Toggle internal bass muting */
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, bits);
+}
+
+static void alc888_fujitsu_xa3530_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if (res >> 26 == ALC880_HP_EVENT)
+ alc888_fujitsu_xa3530_automute(codec);
+}
+
+
+/*
+ * ALC888 Acer Aspire 4930G model
+ */
+
+static struct hda_verb alc888_acer_aspire_4930g_verbs[] = {
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Connect Internal HP to front */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_CONNECT_SEL, 0x00},
+/* Connect HP out to front */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ { }
+};
+
+static struct hda_input_mux alc888_2_capture_sources[2] = {
+ /* Front mic only available on one ADC */
+ {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ { "Front Mic", 0xb },
+ },
+ },
+ {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x0 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+ }
+};
+
+static struct snd_kcontrol_new alc888_base_mixer[] = {
+ HDA_CODEC_VOLUME("Front Playback Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Front Playback Switch", 0x0c, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Surround Playback Volume", 0x0d, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Surround Playback Switch", 0x0d, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x0e, 1, 0x0,
+ HDA_OUTPUT),
+ HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x0e, 2, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE_MONO("Center Playback Switch", 0x0e, 1, 2, HDA_INPUT),
+ HDA_BIND_MUTE_MONO("LFE Playback Switch", 0x0e, 2, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Side Playback Volume", 0x0f, 0x0, HDA_OUTPUT),
+ HDA_BIND_MUTE("Side Playback Switch", 0x0f, 2, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
+ { } /* end */
+};
+
+static void alc888_acer_aspire_4930g_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned int bits;
+ present = snd_hda_codec_read(codec, 0x15, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ bits = present ? HDA_AMP_MUTE : 0;
+ snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, bits);
+}
+
+static void alc888_acer_aspire_4930g_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if (res >> 26 == ALC880_HP_EVENT)
+ alc888_acer_aspire_4930g_automute(codec);
+}
+
/*
* ALC880 3-stack model
*
};
/* capture mixer elements */
-static struct snd_kcontrol_new alc880_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 3,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
-};
+static int alc_cap_vol_info(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ int err;
-/* capture mixer elements (in case NID 0x07 not available) */
-static struct snd_kcontrol_new alc880_capture_alt_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
-};
+ mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[0], 3, 0,
+ HDA_INPUT);
+ err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo);
+ mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ return err;
+}
+
+static int alc_cap_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag,
+ unsigned int size, unsigned int __user *tlv)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ int err;
+
+ mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[0], 3, 0,
+ HDA_INPUT);
+ err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv);
+ mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ return err;
+}
+
+typedef int (*getput_call_t)(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol);
+
+static int alc_cap_getput_caller(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol,
+ getput_call_t func)
+{
+ struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct alc_spec *spec = codec->spec;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ int err;
+
+ mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[adc_idx],
+ 3, 0, HDA_INPUT);
+ err = func(kcontrol, ucontrol);
+ mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+ return err;
+}
+static int alc_cap_vol_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return alc_cap_getput_caller(kcontrol, ucontrol,
+ snd_hda_mixer_amp_volume_get);
+}
+
+static int alc_cap_vol_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return alc_cap_getput_caller(kcontrol, ucontrol,
+ snd_hda_mixer_amp_volume_put);
+}
+
+/* capture mixer elements */
+#define alc_cap_sw_info snd_ctl_boolean_stereo_info
+
+static int alc_cap_sw_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return alc_cap_getput_caller(kcontrol, ucontrol,
+ snd_hda_mixer_amp_switch_get);
+}
+
+static int alc_cap_sw_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ return alc_cap_getput_caller(kcontrol, ucontrol,
+ snd_hda_mixer_amp_switch_put);
+}
+
+#define DEFINE_CAPMIX(num) \
+static struct snd_kcontrol_new alc_capture_mixer ## num[] = { \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = "Capture Switch", \
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
+ .count = num, \
+ .info = alc_cap_sw_info, \
+ .get = alc_cap_sw_get, \
+ .put = alc_cap_sw_put, \
+ }, \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ .name = "Capture Volume", \
+ .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK), \
+ .count = num, \
+ .info = alc_cap_vol_info, \
+ .get = alc_cap_vol_get, \
+ .put = alc_cap_vol_put, \
+ .tlv = { .c = alc_cap_vol_tlv }, \
+ }, \
+ { \
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+ /* .name = "Capture Source", */ \
+ .name = "Input Source", \
+ .count = num, \
+ .info = alc_mux_enum_info, \
+ .get = alc_mux_enum_get, \
+ .put = alc_mux_enum_put, \
+ }, \
+ { } /* end */ \
+}
+
+/* up to three ADCs */
+DEFINE_CAPMIX(1);
+DEFINE_CAPMIX(2);
+DEFINE_CAPMIX(3);
/*
HDA_CODEC_MUTE("Mic Playback Switch", 0x0B, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{ } /* end */
};
"Speaker Playback Volume",
"Mono Playback Volume",
"Line-Out Playback Volume",
+ "PCM Playback Volume",
NULL,
};
/*
* build control elements
*/
+
+static void alc_free_kctls(struct hda_codec *codec);
+
static int alc_build_controls(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
if (err < 0)
return err;
}
-
+ if (spec->cap_mixer) {
+ err = snd_hda_add_new_ctls(codec, spec->cap_mixer);
+ if (err < 0)
+ return err;
+ }
if (spec->multiout.dig_out_nid) {
err = snd_hda_create_spdif_out_ctls(codec,
spec->multiout.dig_out_nid);
return err;
}
+ alc_free_kctls(codec); /* no longer needed */
return 0;
}
return 0;
}
+static void alc_free_kctls(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ if (spec->kctls.list) {
+ struct snd_kcontrol_new *kctl = spec->kctls.list;
+ int i;
+ for (i = 0; i < spec->kctls.used; i++)
+ kfree(kctl[i].name);
+ }
+ snd_array_free(&spec->kctls);
+}
+
static void alc_free(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int i;
if (!spec)
return;
- if (spec->kctl_alloc) {
- for (i = 0; i < spec->num_kctl_used; i++)
- kfree(spec->kctl_alloc[i].name);
- kfree(spec->kctl_alloc);
- }
+ alc_free_kctls(codec);
kfree(spec);
codec->spec = NULL; /* to be sure */
}
alc880_gpio2_init_verbs },
.num_dacs = ARRAY_SIZE(alc880_dac_nids),
.dac_nids = alc880_dac_nids,
+ .adc_nids = alc880_adc_nids_alt, /* FIXME: correct? */
+ .num_adc_nids = 1, /* single ADC */
.hp_nid = 0x03,
.num_channel_mode = ARRAY_SIZE(alc880_2_jack_modes),
.channel_mode = alc880_2_jack_modes,
* Automatic parse of I/O pins from the BIOS configuration
*/
-#define NUM_CONTROL_ALLOC 32
-#define NUM_VERB_ALLOC 32
-
enum {
ALC_CTL_WIDGET_VOL,
ALC_CTL_WIDGET_MUTE,
{
struct snd_kcontrol_new *knew;
- if (spec->num_kctl_used >= spec->num_kctl_alloc) {
- int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
-
- /* array + terminator */
- knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL);
- if (!knew)
- return -ENOMEM;
- if (spec->kctl_alloc) {
- memcpy(knew, spec->kctl_alloc,
- sizeof(*knew) * spec->num_kctl_alloc);
- kfree(spec->kctl_alloc);
- }
- spec->kctl_alloc = knew;
- spec->num_kctl_alloc = num;
- }
-
- knew = &spec->kctl_alloc[spec->num_kctl_used];
+ snd_array_init(&spec->kctls, sizeof(*knew), 32);
+ knew = snd_array_new(&spec->kctls);
+ if (!knew)
+ return -ENOMEM;
*knew = alc880_control_templates[type];
knew->name = kstrdup(name, GFP_KERNEL);
if (!knew->name)
return -ENOMEM;
knew->private_value = val;
- spec->num_kctl_used++;
return 0;
}
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC880_DIGIN_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
- spec->init_verbs[spec->num_init_verbs++] = alc880_volume_init_verbs;
+ add_verb(spec, alc880_volume_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
* OK, here we have finally the patch for ALC880
*/
+static void set_capture_mixer(struct alc_spec *spec)
+{
+ static struct snd_kcontrol_new *caps[3] = {
+ alc_capture_mixer1,
+ alc_capture_mixer2,
+ alc_capture_mixer3,
+ };
+ if (spec->num_adc_nids > 0 && spec->num_adc_nids <= 3)
+ spec->cap_mixer = caps[spec->num_adc_nids - 1];
+}
+
static int patch_alc880(struct hda_codec *codec)
{
struct alc_spec *spec;
if (wcap != AC_WID_AUD_IN) {
spec->adc_nids = alc880_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids_alt);
- spec->mixers[spec->num_mixers] =
- alc880_capture_alt_mixer;
- spec->num_mixers++;
} else {
spec->adc_nids = alc880_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc880_adc_nids);
- spec->mixers[spec->num_mixers] = alc880_capture_mixer;
- spec->num_mixers++;
}
}
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x0c;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc880_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
0x05,
};
-static hda_nid_t alc260_hp_adc_nids[2] = {
- /* ADC1, 0 */
- 0x05, 0x04
-};
-
/* NIDs used when simultaneous access to both ADCs makes sense. Note that
* alc260_capture_mixer assumes ADC0 (nid 0x04) is the first ADC.
*/
struct alc_spec *spec = codec->spec;
unsigned int val = spec->master_sw ? PIN_HP : 0;
/* change HP and line-out pins */
- snd_hda_codec_write(codec, 0x0f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ snd_hda_codec_write(codec, hp, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
val);
- snd_hda_codec_write(codec, 0x10, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ snd_hda_codec_write(codec, line, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
val);
/* mono (speaker) depending on the HP jack sense */
val = (val && !spec->jack_present) ? PIN_OUT : 0;
- snd_hda_codec_write(codec, 0x11, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
+ snd_hda_codec_write(codec, mono, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
val);
}
.info = snd_ctl_boolean_mono_info,
.get = alc260_hp_master_sw_get,
.put = alc260_hp_master_sw_put,
- .private_value = (0x10 << 16) | (0x15 << 8) | 0x11
+ .private_value = (0x15 << 16) | (0x10 << 8) | 0x11
},
HDA_CODEC_VOLUME("Front Playback Volume", 0x09, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x10, 0x0, HDA_OUTPUT),
present = snd_hda_codec_read(codec, 0x15, 0,
AC_VERB_GET_PIN_SENSE, 0);
spec->jack_present = (present & AC_PINSENSE_PRESENCE) != 0;
- alc260_hp_master_update(codec, 0x10, 0x15, 0x11);
+ alc260_hp_master_update(codec, 0x15, 0x10, 0x11);
}
static void alc260_hp_3013_unsol_event(struct hda_codec *codec,
{ } /* end */
};
-/* capture mixer elements */
-static struct snd_kcontrol_new alc260_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x04, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x04, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x05, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x05, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
-};
-
-static struct snd_kcontrol_new alc260_capture_alt_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x05, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x05, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
-};
-
/*
* initialization verbs
*/
static int alc260_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- unsigned int wcap;
int err;
static hda_nid_t alc260_ignore[] = { 0x17, 0 };
err = alc260_auto_create_multi_out_ctls(spec, &spec->autocfg);
if (err < 0)
return err;
- if (!spec->kctl_alloc)
+ if (!spec->kctls.list)
return 0; /* can't find valid BIOS pin config */
err = alc260_auto_create_analog_input_ctls(spec, &spec->autocfg);
if (err < 0)
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC260_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
- spec->init_verbs[spec->num_init_verbs++] = alc260_volume_init_verbs;
+ add_verb(spec, alc260_volume_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
- /* check whether NID 0x04 is valid */
- wcap = get_wcaps(codec, 0x04);
- wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT; /* get type */
- if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
- spec->adc_nids = alc260_adc_nids_alt;
- spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt);
- spec->mixers[spec->num_mixers] = alc260_capture_alt_mixer;
- } else {
- spec->adc_nids = alc260_adc_nids;
- spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
- spec->mixers[spec->num_mixers] = alc260_capture_mixer;
- }
- spec->num_mixers++;
-
store_pin_configs(codec);
return 1;
}
[ALC260_BASIC] = {
.mixers = { alc260_base_output_mixer,
alc260_input_mixer,
- alc260_pc_beep_mixer,
- alc260_capture_mixer },
+ alc260_pc_beep_mixer },
.init_verbs = { alc260_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_adc_nids),
+ .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
.adc_nids = alc260_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
},
[ALC260_HP] = {
.mixers = { alc260_hp_output_mixer,
- alc260_input_mixer,
- alc260_capture_alt_mixer },
+ alc260_input_mixer },
.init_verbs = { alc260_init_verbs,
alc260_hp_unsol_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
- .adc_nids = alc260_hp_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
[ALC260_HP_DC7600] = {
.mixers = { alc260_hp_dc7600_mixer,
- alc260_input_mixer,
- alc260_capture_alt_mixer },
+ alc260_input_mixer },
.init_verbs = { alc260_init_verbs,
alc260_hp_dc7600_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
- .adc_nids = alc260_hp_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
},
[ALC260_HP_3013] = {
.mixers = { alc260_hp_3013_mixer,
- alc260_input_mixer,
- alc260_capture_alt_mixer },
+ alc260_input_mixer },
.init_verbs = { alc260_hp_3013_init_verbs,
alc260_hp_3013_unsol_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
- .num_adc_nids = ARRAY_SIZE(alc260_hp_adc_nids),
- .adc_nids = alc260_hp_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt),
+ .adc_nids = alc260_adc_nids_alt,
.num_channel_mode = ARRAY_SIZE(alc260_modes),
.channel_mode = alc260_modes,
.input_mux = &alc260_capture_source,
.init_hook = alc260_hp_3013_automute,
},
[ALC260_FUJITSU_S702X] = {
- .mixers = { alc260_fujitsu_mixer,
- alc260_capture_mixer },
+ .mixers = { alc260_fujitsu_mixer },
.init_verbs = { alc260_fujitsu_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.input_mux = alc260_fujitsu_capture_sources,
},
[ALC260_ACER] = {
- .mixers = { alc260_acer_mixer,
- alc260_capture_mixer },
+ .mixers = { alc260_acer_mixer },
.init_verbs = { alc260_acer_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.input_mux = alc260_acer_capture_sources,
},
[ALC260_WILL] = {
- .mixers = { alc260_will_mixer,
- alc260_capture_mixer },
+ .mixers = { alc260_will_mixer },
.init_verbs = { alc260_init_verbs, alc260_will_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
.input_mux = &alc260_capture_source,
},
[ALC260_REPLACER_672V] = {
- .mixers = { alc260_replacer_672v_mixer,
- alc260_capture_mixer },
+ .mixers = { alc260_replacer_672v_mixer },
.init_verbs = { alc260_init_verbs, alc260_replacer_672v_verbs },
.num_dacs = ARRAY_SIZE(alc260_dac_nids),
.dac_nids = alc260_dac_nids,
},
#ifdef CONFIG_SND_DEBUG
[ALC260_TEST] = {
- .mixers = { alc260_test_mixer,
- alc260_capture_mixer },
+ .mixers = { alc260_test_mixer },
.init_verbs = { alc260_test_init_verbs },
.num_dacs = ARRAY_SIZE(alc260_test_dac_nids),
.dac_nids = alc260_test_dac_nids,
spec->stream_digital_playback = &alc260_pcm_digital_playback;
spec->stream_digital_capture = &alc260_pcm_digital_capture;
+ if (!spec->adc_nids && spec->input_mux) {
+ /* check whether NID 0x04 is valid */
+ unsigned int wcap = get_wcaps(codec, 0x04);
+ wcap = (wcap & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ /* get type */
+ if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
+ spec->adc_nids = alc260_adc_nids_alt;
+ spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids_alt);
+ } else {
+ spec->adc_nids = alc260_adc_nids;
+ spec->num_adc_nids = ARRAY_SIZE(alc260_adc_nids);
+ }
+ }
+ set_capture_mixer(spec);
+
spec->vmaster_nid = 0x08;
codec->patch_ops = alc_patch_ops;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc260_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
-static struct hda_input_mux alc882_capture_source = {
- .num_items = 4,
- .items = {
- { "Mic", 0x0 },
- { "Front Mic", 0x1 },
- { "Line", 0x2 },
- { "CD", 0x4 },
- },
-};
-#define alc882_mux_enum_info alc_mux_enum_info
-#define alc882_mux_enum_get alc_mux_enum_get
-
-static int alc882_mux_enum_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
- struct alc_spec *spec = codec->spec;
- const struct hda_input_mux *imux = spec->input_mux;
- unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
- hda_nid_t nid = spec->capsrc_nids ?
- spec->capsrc_nids[adc_idx] : spec->adc_nids[adc_idx];
- unsigned int *cur_val = &spec->cur_mux[adc_idx];
- unsigned int i, idx;
-
- idx = ucontrol->value.enumerated.item[0];
- if (idx >= imux->num_items)
- idx = imux->num_items - 1;
- if (*cur_val == idx)
- return 0;
- for (i = 0; i < imux->num_items; i++) {
- unsigned int v = (i == idx) ? 0 : HDA_AMP_MUTE;
- snd_hda_codec_amp_stereo(codec, nid, HDA_INPUT,
- imux->items[i].index,
- HDA_AMP_MUTE, v);
- }
- *cur_val = idx;
- return 1;
-}
-
+static struct hda_input_mux alc882_capture_source = {
+ .num_items = 4,
+ .items = {
+ { "Mic", 0x0 },
+ { "Front Mic", 0x1 },
+ { "Line", 0x2 },
+ { "CD", 0x4 },
+ },
+};
/*
* 2ch mode
*/
{ }
};
-/* capture mixer elements */
-static struct snd_kcontrol_new alc882_capture_alt_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc882_mux_enum_info,
- .get = alc882_mux_enum_get,
- .put = alc882_mux_enum_put,
- },
- { } /* end */
-};
-
-static struct snd_kcontrol_new alc882_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x07, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 2, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 2, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 3,
- .info = alc882_mux_enum_info,
- .get = alc882_mux_enum_get,
- .put = alc882_mux_enum_put,
- },
- { } /* end */
-};
-
#ifdef CONFIG_SND_HDA_POWER_SAVE
#define alc882_loopbacks alc880_loopbacks
#endif
.init_hook = alc885_imac24_init_hook,
},
[ALC882_TARGA] = {
- .mixers = { alc882_targa_mixer, alc882_chmode_mixer,
- alc882_capture_mixer },
+ .mixers = { alc882_targa_mixer, alc882_chmode_mixer },
.init_verbs = { alc882_init_verbs, alc882_targa_verbs},
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
.init_hook = alc882_targa_automute,
},
[ALC882_ASUS_A7J] = {
- .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer,
- alc882_capture_mixer },
+ .mixers = { alc882_asus_a7j_mixer, alc882_chmode_mixer },
.init_verbs = { alc882_init_verbs, alc882_asus_a7j_verbs},
.num_dacs = ARRAY_SIZE(alc882_dac_nids),
.dac_nids = alc882_dac_nids,
spec->stream_digital_playback = &alc882_pcm_digital_playback;
spec->stream_digital_capture = &alc882_pcm_digital_capture;
+ spec->is_mix_capture = 1; /* matrix-style capture */
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
spec->adc_nids = alc882_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids_alt);
spec->capsrc_nids = alc882_capsrc_nids_alt;
- spec->mixers[spec->num_mixers] =
- alc882_capture_alt_mixer;
- spec->num_mixers++;
} else {
spec->adc_nids = alc882_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc882_adc_nids);
spec->capsrc_nids = alc882_capsrc_nids;
- spec->mixers[spec->num_mixers] = alc882_capture_mixer;
- spec->num_mixers++;
}
}
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x0c;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc882_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
#define ALC883_DIGOUT_NID 0x06
#define ALC883_DIGIN_NID 0x0a
+#define ALC1200_DIGOUT_NID 0x10
+
static hda_nid_t alc883_dac_nids[4] = {
/* front, rear, clfe, rear_surr */
0x02, 0x03, 0x04, 0x05
0x08, 0x09,
};
+static hda_nid_t alc883_adc_nids_alt[1] = {
+ /* ADC1 */
+ 0x08,
+};
+
+static hda_nid_t alc883_adc_nids_rev[2] = {
+ /* ADC2-1 */
+ 0x09, 0x08
+};
+
static hda_nid_t alc883_capsrc_nids[2] = { 0x23, 0x22 };
+static hda_nid_t alc883_capsrc_nids_rev[2] = { 0x22, 0x23 };
+
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
},
};
-#define alc883_mux_enum_info alc_mux_enum_info
-#define alc883_mux_enum_get alc_mux_enum_get
-/* ALC883 has the ALC882-type input selection */
-#define alc883_mux_enum_put alc882_mux_enum_put
-
/*
* 2ch mode
*/
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x05, HDA_INPUT),
HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x05, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Int Mic Boost", 0x19, 0, HDA_INPUT),
HDA_CODEC_MUTE("Int Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("iMic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_MUTE("iMic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Line Playback Volume", 0x0b, 0x02, HDA_INPUT),
HDA_CODEC_MUTE("Line Playback Switch", 0x0b, 0x02, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Front Mic Playback Volume", 0x0b, 0x1, HDA_INPUT),
HDA_CODEC_VOLUME("Front Mic Boost", 0x19, 0, HDA_INPUT),
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x0b, 0x1, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
+static struct snd_kcontrol_new alc883_asus_eee1601_cap_mixer[] = {
HDA_BIND_VOL("Capture Volume", &alc883_bind_cap_vol),
HDA_BIND_SW("Capture Switch", &alc883_bind_cap_switch),
{
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
- .info = alc883_mux_enum_info,
- .get = alc883_mux_enum_get,
- .put = alc883_mux_enum_put,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
},
{ } /* end */
};
{ }
};
-/* capture mixer elements */
-static struct snd_kcontrol_new alc883_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME_IDX("Capture Volume", 1, 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE_IDX("Capture Switch", 1, 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 2,
- .info = alc882_mux_enum_info,
- .get = alc882_mux_enum_get,
- .put = alc882_mux_enum_put,
- },
- { } /* end */
-};
-
static struct hda_verb alc888_asus_m90v_verbs[] = {
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
[ALC883_TARGA_2ch_DIG] = "targa-2ch-dig",
[ALC883_ACER] = "acer",
[ALC883_ACER_ASPIRE] = "acer-aspire",
+ [ALC888_ACER_ASPIRE_4930G] = "acer-aspire-4930g",
[ALC883_MEDION] = "medion",
[ALC883_MEDION_MD2] = "medion-md2",
[ALC883_LAPTOP_EAPD] = "laptop-eapd",
[ALC883_MITAC] = "mitac",
[ALC883_CLEVO_M720] = "clevo-m720",
[ALC883_FUJITSU_PI2515] = "fujitsu-pi2515",
+ [ALC888_FUJITSU_XA3530] = "fujitsu-xa3530",
[ALC883_3ST_6ch_INTEL] = "3stack-6ch-intel",
+ [ALC1200_ASUS_P5Q] = "asus-p5q",
[ALC883_AUTO] = "auto",
};
SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_ACER_ASPIRE),
SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE),
+ SND_PCI_QUIRK(0x1025, 0x013e, "Acer Aspire 4930G",
+ ALC888_ACER_ASPIRE_4930G),
SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x1873, "Asus M90V", ALC888_ASUS_M90V),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1043, 0x82fe, "Asus P5Q-EM HDMI", ALC1200_ASUS_P5Q),
SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601),
SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7187, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7250, "MSI", ALC883_6ST_DIG),
+ SND_PCI_QUIRK(0x1462, 0x7260, "MSI 7260", ALC883_TARGA_DIG),
SND_PCI_QUIRK(0x1462, 0x7267, "MSI", ALC883_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1462, 0x7280, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1462, 0x7327, "MSI", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
+ SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+ ALC888_FUJITSU_XA3530),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
.init_verbs = { alc883_init_verbs, alc883_tagra_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
+ .adc_nids = alc883_adc_nids_alt,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt),
.dig_out_nid = ALC883_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
.channel_mode = alc883_3ST_2ch_modes,
.unsol_event = alc883_acer_aspire_unsol_event,
.init_hook = alc883_acer_aspire_automute,
},
+ [ALC888_ACER_ASPIRE_4930G] = {
+ .mixers = { alc888_base_mixer,
+ alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs, alc880_gpio1_init_verbs,
+ alc888_acer_aspire_4930g_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+ .adc_nids = alc883_adc_nids_rev,
+ .capsrc_nids = alc883_capsrc_nids_rev,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_3ST_6ch_modes),
+ .channel_mode = alc883_3ST_6ch_modes,
+ .need_dac_fix = 1,
+ .num_mux_defs =
+ ARRAY_SIZE(alc888_2_capture_sources),
+ .input_mux = alc888_2_capture_sources,
+ .unsol_event = alc888_acer_aspire_4930g_unsol_event,
+ .init_hook = alc888_acer_aspire_4930g_automute,
+ },
[ALC883_MEDION] = {
.mixers = { alc883_fivestack_mixer,
alc883_chmode_mixer },
alc883_medion_eapd_verbs },
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
+ .adc_nids = alc883_adc_nids_alt,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt),
.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
.channel_mode = alc883_sixstack_modes,
.input_mux = &alc883_capture_source,
.init_verbs = { alc883_init_verbs, alc883_lenovo_101e_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
+ .adc_nids = alc883_adc_nids_alt,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_alt),
.num_channel_mode = ARRAY_SIZE(alc883_3ST_2ch_modes),
.channel_mode = alc883_3ST_2ch_modes,
.input_mux = &alc883_lenovo_101e_capture_source,
.unsol_event = alc883_2ch_fujitsu_pi2515_unsol_event,
.init_hook = alc883_2ch_fujitsu_pi2515_automute,
},
+ [ALC888_FUJITSU_XA3530] = {
+ .mixers = { alc888_base_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs,
+ alc888_fujitsu_xa3530_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc883_adc_nids_rev),
+ .adc_nids = alc883_adc_nids_rev,
+ .capsrc_nids = alc883_capsrc_nids_rev,
+ .dig_out_nid = ALC883_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc888_4ST_8ch_intel_modes),
+ .channel_mode = alc888_4ST_8ch_intel_modes,
+ .num_mux_defs =
+ ARRAY_SIZE(alc888_2_capture_sources),
+ .input_mux = alc888_2_capture_sources,
+ .unsol_event = alc888_fujitsu_xa3530_unsol_event,
+ .init_hook = alc888_fujitsu_xa3530_automute,
+ },
[ALC888_LENOVO_SKY] = {
.mixers = { alc888_lenovo_sky_mixer, alc883_chmode_mixer },
.init_verbs = { alc883_init_verbs, alc888_lenovo_sky_verbs},
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.dig_out_nid = ALC883_DIGOUT_NID,
- .num_adc_nids = ARRAY_SIZE(alc883_adc_nids),
- .adc_nids = alc883_adc_nids,
.num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
.channel_mode = alc883_sixstack_modes,
.need_dac_fix = 1,
},
[ALC888_ASUS_EEE1601] = {
.mixers = { alc883_asus_eee1601_mixer },
+ .cap_mixer = alc883_asus_eee1601_cap_mixer,
.init_verbs = { alc883_init_verbs, alc888_asus_eee1601_verbs },
.num_dacs = ARRAY_SIZE(alc883_dac_nids),
.dac_nids = alc883_dac_nids,
.unsol_event = alc883_eee1601_unsol_event,
.init_hook = alc883_eee1601_inithook,
},
+ [ALC1200_ASUS_P5Q] = {
+ .mixers = { alc883_base_mixer, alc883_chmode_mixer },
+ .init_verbs = { alc883_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc883_dac_nids),
+ .dac_nids = alc883_dac_nids,
+ .dig_out_nid = ALC1200_DIGOUT_NID,
+ .dig_in_nid = ALC883_DIGIN_NID,
+ .num_channel_mode = ARRAY_SIZE(alc883_sixstack_modes),
+ .channel_mode = alc883_sixstack_modes,
+ .input_mux = &alc883_capture_source,
+ },
};
/* hack - override the init verbs */
spec->init_verbs[0] = alc883_auto_init_verbs;
- spec->mixers[spec->num_mixers] = alc883_capture_mixer;
- spec->num_mixers++;
return 1; /* config found */
}
spec->stream_digital_playback = &alc883_pcm_digital_playback;
spec->stream_digital_capture = &alc883_pcm_digital_capture;
- spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
- spec->adc_nids = alc883_adc_nids;
- spec->capsrc_nids = alc883_capsrc_nids;
+ if (!spec->num_adc_nids) {
+ spec->num_adc_nids = ARRAY_SIZE(alc883_adc_nids);
+ spec->adc_nids = alc883_adc_nids;
+ }
+ if (!spec->capsrc_nids)
+ spec->capsrc_nids = alc883_capsrc_nids;
+ spec->is_mix_capture = 1; /* matrix-style capture */
+ if (!spec->cap_mixer)
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x0c;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc883_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{ } /* end */
};
struct alc_spec *spec = codec->spec;
int ret;
- ret = alc882_mux_enum_put(kcontrol, ucontrol);
+ ret = alc_mux_enum_put(kcontrol, ucontrol);
if (!ret)
return 0;
/* reprogram the HP pin as mic or HP according to the input source */
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Capture Source",
- .info = alc882_mux_enum_info,
- .get = alc882_mux_enum_get,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
.put = alc262_ultra_mux_enum_put,
},
{ } /* end */
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = ALC262_DIGIN_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
- spec->init_verbs[spec->num_init_verbs++] = alc262_volume_init_verbs;
+ add_verb(spec, alc262_volume_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x900e, "Sony ASSAMD", ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x104d, 0x9015, "Sony 0x9015", ALC262_SONY_ASSAMD),
+ SND_PCI_QUIRK(0x104d, 0x9033, "Sony VAIO VGN-SR19XN",
+ ALC262_SONY_ASSAMD),
SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1",
ALC262_TOSHIBA_RX1),
SND_PCI_QUIRK(0x1179, 0xff7b, "Toshiba S06", ALC262_TOSHIBA_S06),
.init_hook = alc262_hippo_automute,
},
[ALC262_ULTRA] = {
- .mixers = { alc262_ultra_mixer, alc262_ultra_capture_mixer },
+ .mixers = { alc262_ultra_mixer },
+ .cap_mixer = alc262_ultra_capture_mixer,
.init_verbs = { alc262_ultra_verbs },
.num_dacs = ARRAY_SIZE(alc262_dac_nids),
.dac_nids = alc262_dac_nids,
spec->stream_digital_playback = &alc262_pcm_digital_playback;
spec->stream_digital_capture = &alc262_pcm_digital_capture;
+ spec->is_mix_capture = 1;
if (!spec->adc_nids && spec->input_mux) {
/* check whether NID 0x07 is valid */
unsigned int wcap = get_wcaps(codec, 0x07);
spec->adc_nids = alc262_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids_alt);
spec->capsrc_nids = alc262_capsrc_nids_alt;
- spec->mixers[spec->num_mixers] =
- alc262_capture_alt_mixer;
- spec->num_mixers++;
} else {
spec->adc_nids = alc262_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc262_adc_nids);
spec->capsrc_nids = alc262_capsrc_nids;
- spec->mixers[spec->num_mixers] = alc262_capture_mixer;
- spec->num_mixers++;
}
}
+ if (!spec->cap_mixer)
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x0c;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc262_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
{ }
};
+static struct snd_kcontrol_new alc268_acer_dmic_mixer[] = {
+ /* output mixer control */
+ HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = alc268_acer_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
+ },
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line In Boost", 0x1a, 0, HDA_INPUT),
+ { }
+};
+
static struct hda_verb alc268_acer_aspire_one_verbs[] = {
{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{ }
};
-#define alc268_mux_enum_info alc_mux_enum_info
-#define alc268_mux_enum_get alc_mux_enum_get
-#define alc268_mux_enum_put alc_mux_enum_put
-
static struct snd_kcontrol_new alc268_capture_alt_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x23, 0x0, HDA_OUTPUT),
/* .name = "Capture Source", */
.name = "Input Source",
.count = 1,
- .info = alc268_mux_enum_info,
- .get = alc268_mux_enum_get,
- .put = alc268_mux_enum_put,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
},
{ } /* end */
};
/* .name = "Capture Source", */
.name = "Input Source",
.count = 2,
- .info = alc268_mux_enum_info,
- .get = alc268_mux_enum_get,
- .put = alc268_mux_enum_put,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
},
{ } /* end */
};
};
static struct hda_input_mux alc268_acer_capture_source = {
+ .num_items = 3,
+ .items = {
+ { "Mic", 0x0 },
+ { "Internal Mic", 0x1 },
+ { "Line", 0x2 },
+ },
+};
+
+static struct hda_input_mux alc268_acer_dmic_capture_source = {
.num_items = 3,
.items = {
{ "Mic", 0x0 },
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC268_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
if (spec->autocfg.speaker_pins[0] != 0x1d)
- spec->mixers[spec->num_mixers++] = alc268_beep_mixer;
+ add_mixer(spec, alc268_beep_mixer);
- spec->init_verbs[spec->num_init_verbs++] = alc268_volume_init_verbs;
+ add_verb(spec, alc268_volume_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
[ALC268_3ST] = "3stack",
[ALC268_TOSHIBA] = "toshiba",
[ALC268_ACER] = "acer",
+ [ALC268_ACER_DMIC] = "acer-dmic",
[ALC268_ACER_ASPIRE_ONE] = "acer-aspire",
[ALC268_DELL] = "dell",
[ALC268_ZEPTO] = "zepto",
.unsol_event = alc268_acer_unsol_event,
.init_hook = alc268_acer_init_hook,
},
+ [ALC268_ACER_DMIC] = {
+ .mixers = { alc268_acer_dmic_mixer, alc268_capture_alt_mixer,
+ alc268_beep_mixer },
+ .init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
+ alc268_acer_verbs },
+ .num_dacs = ARRAY_SIZE(alc268_dac_nids),
+ .dac_nids = alc268_dac_nids,
+ .num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
+ .adc_nids = alc268_adc_nids_alt,
+ .capsrc_nids = alc268_capsrc_nids,
+ .hp_nid = 0x02,
+ .num_channel_mode = ARRAY_SIZE(alc268_modes),
+ .channel_mode = alc268_modes,
+ .input_mux = &alc268_acer_dmic_capture_source,
+ .unsol_event = alc268_acer_unsol_event,
+ .init_hook = alc268_acer_init_hook,
+ },
[ALC268_ACER_ASPIRE_ONE] = {
.mixers = { alc268_acer_aspire_one_mixer,
alc268_capture_alt_mixer },
if (wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc268_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt);
- spec->mixers[spec->num_mixers] =
- alc268_capture_alt_mixer;
- spec->num_mixers++;
+ add_mixer(spec, alc268_capture_alt_mixer);
} else {
spec->adc_nids = alc268_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids);
- spec->mixers[spec->num_mixers] =
- alc268_capture_mixer;
- spec->num_mixers++;
+ add_mixer(spec, alc268_capture_mixer);
}
spec->capsrc_nids = alc268_capsrc_nids;
/* set default input source */
if (board_config == ALC268_AUTO)
spec->init_hook = alc268_auto_init;
+ codec->proc_widget_hook = print_realtek_coef;
+
return 0;
}
{ }
};
+static struct snd_kcontrol_new alc269_lifebook_mixer[] = {
+ /* output mixer control */
+ HDA_BIND_VOL("Master Playback Volume", &alc268_acer_bind_master_vol),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = alc268_acer_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x14, 3, 0, HDA_OUTPUT),
+ },
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x0b, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Playback Volume", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Internal Mic Playback Switch", 0x0b, 0x01, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Boost", 0x19, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Dock Mic Playback Volume", 0x0b, 0x03, HDA_INPUT),
+ HDA_CODEC_MUTE("Dock Mic Playback Switch", 0x0b, 0x03, HDA_INPUT),
+ HDA_CODEC_VOLUME("Dock Mic Boost", 0x1b, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("PC Speaker Playback Volume", 0x0b, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("PC Speaker Playback Switch", 0x0b, 0x04, HDA_INPUT),
+ { }
+};
+
/* bind volumes of both NID 0x0c and 0x0d */
static struct hda_bind_ctls alc269_epc_bind_vol = {
.ops = &snd_hda_bind_vol,
};
/* capture mixer elements */
-static struct snd_kcontrol_new alc269_capture_mixer[] = {
+static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
+ HDA_CODEC_VOLUME("Mic Boost", 0x18, 0, HDA_INPUT),
{ } /* end */
};
-/* capture mixer elements */
-static struct snd_kcontrol_new alc269_epc_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+/* FSC amilo */
+static struct snd_kcontrol_new alc269_fujitsu_mixer[] = {
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x14, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_BIND_VOL("PCM Playback Volume", &alc269_epc_bind_vol),
{ } /* end */
};
{ }
};
+static struct hda_verb alc269_lifebook_verbs[] = {
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x1a, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x1d, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ { }
+};
+
/* toggle speaker-output according to the hp-jack state */
static void alc269_quanta_fl1_speaker_automute(struct hda_codec *codec)
{
AC_VERB_SET_PROC_COEF, 0x480);
}
+/* toggle speaker-output according to the hp-jacks state */
+static void alc269_lifebook_speaker_automute(struct hda_codec *codec)
+{
+ unsigned int present;
+ unsigned char bits;
+
+ /* Check laptop headphone socket */
+ present = snd_hda_codec_read(codec, 0x15, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+
+ /* Check port replicator headphone socket */
+ present |= snd_hda_codec_read(codec, 0x1a, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+
+ bits = present ? AMP_IN_MUTE(0) : 0;
+ snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 0,
+ AMP_IN_MUTE(0), bits);
+ snd_hda_codec_amp_stereo(codec, 0x0c, HDA_INPUT, 1,
+ AMP_IN_MUTE(0), bits);
+
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_COEF_INDEX, 0x0c);
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_PROC_COEF, 0x680);
+
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_COEF_INDEX, 0x0c);
+ snd_hda_codec_write(codec, 0x20, 0,
+ AC_VERB_SET_PROC_COEF, 0x480);
+}
+
static void alc269_quanta_fl1_mic_automute(struct hda_codec *codec)
{
unsigned int present;
AC_VERB_SET_CONNECT_SEL, present ? 0x0 : 0x1);
}
+static void alc269_lifebook_mic_autoswitch(struct hda_codec *codec)
+{
+ unsigned int present_laptop;
+ unsigned int present_dock;
+
+ present_laptop = snd_hda_codec_read(codec, 0x18, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+
+ present_dock = snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+
+ /* Laptop mic port overrides dock mic port, design decision */
+ if (present_dock)
+ snd_hda_codec_write(codec, 0x23, 0,
+ AC_VERB_SET_CONNECT_SEL, 0x3);
+ if (present_laptop)
+ snd_hda_codec_write(codec, 0x23, 0,
+ AC_VERB_SET_CONNECT_SEL, 0x0);
+ if (!present_dock && !present_laptop)
+ snd_hda_codec_write(codec, 0x23, 0,
+ AC_VERB_SET_CONNECT_SEL, 0x1);
+}
+
static void alc269_quanta_fl1_unsol_event(struct hda_codec *codec,
unsigned int res)
{
alc269_quanta_fl1_mic_automute(codec);
}
+static void alc269_lifebook_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ if ((res >> 26) == ALC880_HP_EVENT)
+ alc269_lifebook_speaker_automute(codec);
+ if ((res >> 26) == ALC880_MIC_EVENT)
+ alc269_lifebook_mic_autoswitch(codec);
+}
+
static void alc269_quanta_fl1_init_hook(struct hda_codec *codec)
{
alc269_quanta_fl1_speaker_automute(codec);
alc269_quanta_fl1_mic_automute(codec);
}
+static void alc269_lifebook_init_hook(struct hda_codec *codec)
+{
+ alc269_lifebook_speaker_automute(codec);
+ alc269_lifebook_mic_autoswitch(codec);
+}
+
static struct hda_verb alc269_eeepc_dmic_init_verbs[] = {
{0x15, AC_VERB_SET_CONNECT_SEL, 0x01},
{0x23, AC_VERB_SET_CONNECT_SEL, 0x05},
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC269_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
/* create a beep mixer control if the pin 0x1d isn't assigned */
for (i = 0; i < ARRAY_SIZE(spec->autocfg.input_pins); i++)
if (spec->autocfg.input_pins[i] == 0x1d)
break;
if (i >= ARRAY_SIZE(spec->autocfg.input_pins))
- spec->mixers[spec->num_mixers++] = alc269_beep_mixer;
+ add_mixer(spec, alc269_beep_mixer);
- spec->init_verbs[spec->num_init_verbs++] = alc269_init_verbs;
+ add_verb(spec, alc269_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
/* set default input source */
if (err < 0)
return err;
- spec->mixers[spec->num_mixers] = alc269_capture_mixer;
- spec->num_mixers++;
+ if (!spec->cap_mixer)
+ set_capture_mixer(spec);
store_pin_configs(codec);
return 1;
[ALC269_BASIC] = "basic",
[ALC269_QUANTA_FL1] = "quanta",
[ALC269_ASUS_EEEPC_P703] = "eeepc-p703",
- [ALC269_ASUS_EEEPC_P901] = "eeepc-p901"
+ [ALC269_ASUS_EEEPC_P901] = "eeepc-p901",
+ [ALC269_FUJITSU] = "fujitsu",
+ [ALC269_LIFEBOOK] = "lifebook"
};
static struct snd_pci_quirk alc269_cfg_tbl[] = {
ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
ALC269_ASUS_EEEPC_P901),
+ SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
+ SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
{}
};
static struct alc_config_preset alc269_presets[] = {
[ALC269_BASIC] = {
- .mixers = { alc269_base_mixer, alc269_capture_mixer },
+ .mixers = { alc269_base_mixer },
.init_verbs = { alc269_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.dac_nids = alc269_dac_nids,
.init_hook = alc269_quanta_fl1_init_hook,
},
[ALC269_ASUS_EEEPC_P703] = {
- .mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer },
+ .mixers = { alc269_eeepc_mixer },
+ .cap_mixer = alc269_epc_capture_mixer,
.init_verbs = { alc269_init_verbs,
alc269_eeepc_amic_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.init_hook = alc269_eeepc_amic_inithook,
},
[ALC269_ASUS_EEEPC_P901] = {
- .mixers = { alc269_eeepc_mixer, alc269_epc_capture_mixer},
+ .mixers = { alc269_eeepc_mixer },
+ .cap_mixer = alc269_epc_capture_mixer,
+ .init_verbs = { alc269_init_verbs,
+ alc269_eeepc_dmic_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc269_dac_nids),
+ .dac_nids = alc269_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc269_modes),
+ .channel_mode = alc269_modes,
+ .input_mux = &alc269_eeepc_dmic_capture_source,
+ .unsol_event = alc269_eeepc_dmic_unsol_event,
+ .init_hook = alc269_eeepc_dmic_inithook,
+ },
+ [ALC269_FUJITSU] = {
+ .mixers = { alc269_fujitsu_mixer, alc269_beep_mixer },
+ .cap_mixer = alc269_epc_capture_mixer,
.init_verbs = { alc269_init_verbs,
alc269_eeepc_dmic_init_verbs },
.num_dacs = ARRAY_SIZE(alc269_dac_nids),
.unsol_event = alc269_eeepc_dmic_unsol_event,
.init_hook = alc269_eeepc_dmic_inithook,
},
+ [ALC269_LIFEBOOK] = {
+ .mixers = { alc269_lifebook_mixer },
+ .init_verbs = { alc269_init_verbs, alc269_lifebook_verbs },
+ .num_dacs = ARRAY_SIZE(alc269_dac_nids),
+ .dac_nids = alc269_dac_nids,
+ .hp_nid = 0x03,
+ .num_channel_mode = ARRAY_SIZE(alc269_modes),
+ .channel_mode = alc269_modes,
+ .input_mux = &alc269_capture_source,
+ .unsol_event = alc269_lifebook_unsol_event,
+ .init_hook = alc269_lifebook_init_hook,
+ },
};
static int patch_alc269(struct hda_codec *codec)
spec->adc_nids = alc269_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
spec->capsrc_nids = alc269_capsrc_nids;
+ if (!spec->cap_mixer)
+ set_capture_mixer(spec);
codec->patch_ops = alc_patch_ops;
if (board_config == ALC269_AUTO)
if (!spec->loopback.amplist)
spec->loopback.amplist = alc269_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
- /* Capture mixer control */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
- /* Capture mixer control */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
- /*Capture mixer control */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
-
{ } /* end */
};
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_INPUT),
- /* Capture mixer control */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT),
- /* Capture mixer control */
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
{
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.name = "Channel Mode",
return 0;
}
-static struct snd_kcontrol_new alc861_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc_mux_enum_info,
- .get = alc_mux_enum_get,
- .put = alc_mux_enum_put,
- },
- { } /* end */
-};
-
static void alc861_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid,
int pin_type, int dac_idx)
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC861_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
- spec->init_verbs[spec->num_init_verbs++] = alc861_auto_init_verbs;
+ add_verb(spec, alc861_auto_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
spec->adc_nids = alc861_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861_adc_nids);
- spec->mixers[spec->num_mixers] = alc861_capture_mixer;
- spec->num_mixers++;
+ set_capture_mixer(spec);
store_pin_configs(codec);
return 1;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc861_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
},
};
-#define alc861vd_mux_enum_info alc_mux_enum_info
-#define alc861vd_mux_enum_get alc_mux_enum_get
-/* ALC861VD has the ALC882-type input selection (but has only one ADC) */
-#define alc861vd_mux_enum_put alc882_mux_enum_put
-
/*
* 2ch mode
*/
{ } /* end */
};
-static struct snd_kcontrol_new alc861vd_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
-
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc861vd_mux_enum_info,
- .get = alc861vd_mux_enum_get,
- .put = alc861vd_mux_enum_put,
- },
- { } /* end */
-};
-
/* Pin assignment: Front=0x14, Rear=0x15, CLFE=0x16, Side=0x17
* Mic=0x18, Front Mic=0x19, Line-In=0x1a, HP=0x1b
*/
static const char *alc861vd_models[ALC861VD_MODEL_LAST] = {
[ALC660VD_3ST] = "3stack-660",
[ALC660VD_3ST_DIG] = "3stack-660-digout",
+ [ALC660VD_ASUS_V1S] = "asus-v1s",
[ALC861VD_3ST] = "3stack",
[ALC861VD_3ST_DIG] = "3stack-digout",
[ALC861VD_6ST_DIG] = "6stack-digout",
SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
- SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC861VD_LENOVO),
+ SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
SND_PCI_QUIRK(0x1179, 0xff00, "Toshiba A135", ALC861VD_LENOVO),
.unsol_event = alc861vd_dallas_unsol_event,
.init_hook = alc861vd_dallas_automute,
},
+ [ALC660VD_ASUS_V1S] = {
+ .mixers = { alc861vd_lenovo_mixer },
+ .init_verbs = { alc861vd_volume_init_verbs,
+ alc861vd_3stack_init_verbs,
+ alc861vd_eapd_verbs,
+ alc861vd_lenovo_unsol_verbs },
+ .num_dacs = ARRAY_SIZE(alc660vd_dac_nids),
+ .dac_nids = alc660vd_dac_nids,
+ .dig_out_nid = ALC861VD_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861vd_3stack_2ch_modes),
+ .channel_mode = alc861vd_3stack_2ch_modes,
+ .input_mux = &alc861vd_capture_source,
+ .unsol_event = alc861vd_lenovo_unsol_event,
+ .init_hook = alc861vd_lenovo_automute,
+ },
};
/*
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC861VD_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
- spec->init_verbs[spec->num_init_verbs++]
- = alc861vd_volume_init_verbs;
+ add_verb(spec, alc861vd_volume_init_verbs);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
spec->stream_name_analog = "ALC660-VD Analog";
spec->stream_name_digital = "ALC660-VD Digital";
/* always turn on EAPD */
- spec->init_verbs[spec->num_init_verbs++] = alc660vd_eapd_verbs;
+ add_verb(spec, alc660vd_eapd_verbs);
} else {
spec->stream_name_analog = "ALC861VD Analog";
spec->stream_name_digital = "ALC861VD Digital";
spec->adc_nids = alc861vd_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc861vd_adc_nids);
spec->capsrc_nids = alc861vd_capsrc_nids;
+ spec->is_mix_capture = 1;
- spec->mixers[spec->num_mixers] = alc861vd_capture_mixer;
- spec->num_mixers++;
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x02;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc861vd_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
},
};
-#define alc662_mux_enum_info alc_mux_enum_info
-#define alc662_mux_enum_get alc_mux_enum_get
-#define alc662_mux_enum_put alc882_mux_enum_put
-
/*
* 2ch mode
*/
{}
};
-/* capture mixer elements */
-static struct snd_kcontrol_new alc662_capture_mixer[] = {
- HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- /* The multiple "Capture Source" controls confuse alsamixer
- * So call somewhat different..
- */
- /* .name = "Capture Source", */
- .name = "Input Source",
- .count = 1,
- .info = alc662_mux_enum_info,
- .get = alc662_mux_enum_get,
- .put = alc662_mux_enum_put,
- },
- { } /* end */
-};
-
static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
static struct alc_config_preset alc662_presets[] = {
[ALC662_3ST_2ch_DIG] = {
- .mixers = { alc662_3ST_2ch_mixer, alc662_capture_mixer },
+ .mixers = { alc662_3ST_2ch_mixer },
.init_verbs = { alc662_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.input_mux = &alc662_capture_source,
},
[ALC662_3ST_6ch_DIG] = {
- .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer,
- alc662_capture_mixer },
+ .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
.init_verbs = { alc662_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.input_mux = &alc662_capture_source,
},
[ALC662_3ST_6ch] = {
- .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer,
- alc662_capture_mixer },
+ .mixers = { alc662_3ST_6ch_mixer, alc662_chmode_mixer },
.init_verbs = { alc662_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.input_mux = &alc662_capture_source,
},
[ALC662_5ST_DIG] = {
- .mixers = { alc662_base_mixer, alc662_chmode_mixer,
- alc662_capture_mixer },
+ .mixers = { alc662_base_mixer, alc662_chmode_mixer },
.init_verbs = { alc662_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.input_mux = &alc662_capture_source,
},
[ALC662_LENOVO_101E] = {
- .mixers = { alc662_lenovo_101e_mixer, alc662_capture_mixer },
+ .mixers = { alc662_lenovo_101e_mixer },
.init_verbs = { alc662_init_verbs, alc662_sue_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.init_hook = alc662_lenovo_101e_all_automute,
},
[ALC662_ASUS_EEEPC_P701] = {
- .mixers = { alc662_eeepc_p701_mixer, alc662_capture_mixer },
+ .mixers = { alc662_eeepc_p701_mixer },
.init_verbs = { alc662_init_verbs,
alc662_eeepc_sue_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc662_eeepc_inithook,
},
[ALC662_ASUS_EEEPC_EP20] = {
- .mixers = { alc662_eeepc_ep20_mixer, alc662_capture_mixer,
+ .mixers = { alc662_eeepc_ep20_mixer,
alc662_chmode_mixer },
.init_verbs = { alc662_init_verbs,
alc662_eeepc_ep20_sue_init_verbs },
.init_hook = alc662_eeepc_ep20_inithook,
},
[ALC662_ECS] = {
- .mixers = { alc662_ecs_mixer, alc662_capture_mixer },
+ .mixers = { alc662_ecs_mixer },
.init_verbs = { alc662_init_verbs,
alc662_ecs_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc662_eeepc_inithook,
},
[ALC663_ASUS_M51VA] = {
- .mixers = { alc663_m51va_mixer, alc662_capture_mixer},
+ .mixers = { alc663_m51va_mixer },
.init_verbs = { alc662_init_verbs, alc663_m51va_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.init_hook = alc663_m51va_inithook,
},
[ALC663_ASUS_G71V] = {
- .mixers = { alc663_g71v_mixer, alc662_capture_mixer},
+ .mixers = { alc663_g71v_mixer },
.init_verbs = { alc662_init_verbs, alc663_g71v_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.init_hook = alc663_g71v_inithook,
},
[ALC663_ASUS_H13] = {
- .mixers = { alc663_m51va_mixer, alc662_capture_mixer},
+ .mixers = { alc663_m51va_mixer },
.init_verbs = { alc662_init_verbs, alc663_m51va_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.init_hook = alc663_m51va_inithook,
},
[ALC663_ASUS_G50V] = {
- .mixers = { alc663_g50v_mixer, alc662_capture_mixer},
+ .mixers = { alc663_g50v_mixer },
.init_verbs = { alc662_init_verbs, alc663_g50v_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.dac_nids = alc662_dac_nids,
.init_hook = alc663_g50v_inithook,
},
[ALC663_ASUS_MODE1] = {
- .mixers = { alc663_m51va_mixer, alc662_auto_capture_mixer },
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc663_21jd_amic_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc663_mode1_inithook,
},
[ALC662_ASUS_MODE2] = {
- .mixers = { alc662_1bjd_mixer, alc662_auto_capture_mixer },
+ .mixers = { alc662_1bjd_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc662_1bjd_amic_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc662_mode2_inithook,
},
[ALC663_ASUS_MODE3] = {
- .mixers = { alc663_two_hp_m1_mixer, alc662_auto_capture_mixer },
+ .mixers = { alc663_two_hp_m1_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc663_two_hp_amic_m1_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc663_mode3_inithook,
},
[ALC663_ASUS_MODE4] = {
- .mixers = { alc663_asus_21jd_clfe_mixer,
- alc662_auto_capture_mixer},
+ .mixers = { alc663_asus_21jd_clfe_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc663_21jd_amic_init_verbs},
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc663_mode4_inithook,
},
[ALC663_ASUS_MODE5] = {
- .mixers = { alc663_asus_15jd_clfe_mixer,
- alc662_auto_capture_mixer },
+ .mixers = { alc663_asus_15jd_clfe_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc663_15jd_amic_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
.init_hook = alc663_mode5_inithook,
},
[ALC663_ASUS_MODE6] = {
- .mixers = { alc663_two_hp_m2_mixer, alc662_auto_capture_mixer },
+ .mixers = { alc663_two_hp_m2_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
.init_verbs = { alc662_init_verbs,
alc663_two_hp_amic_m2_init_verbs },
.num_dacs = ARRAY_SIZE(alc662_dac_nids),
if (spec->autocfg.dig_out_pin)
spec->multiout.dig_out_nid = ALC880_DIGOUT_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ add_mixer(spec, spec->kctls.list);
spec->num_mux_defs = 1;
spec->input_mux = &spec->private_imux;
- spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+ add_verb(spec, alc662_auto_init_verbs);
if (codec->vendor_id == 0x10ec0663)
- spec->init_verbs[spec->num_init_verbs++] =
- alc663_auto_init_verbs;
+ add_verb(spec, alc663_auto_init_verbs);
err = alc_auto_add_mic_boost(codec);
if (err < 0)
return err;
- spec->mixers[spec->num_mixers] = alc662_capture_mixer;
- spec->num_mixers++;
-
store_pin_configs(codec);
return 1;
}
spec->adc_nids = alc662_adc_nids;
spec->num_adc_nids = ARRAY_SIZE(alc662_adc_nids);
spec->capsrc_nids = alc662_capsrc_nids;
+ spec->is_mix_capture = 1;
+
+ if (!spec->cap_mixer)
+ set_capture_mixer(spec);
spec->vmaster_nid = 0x02;
if (!spec->loopback.amplist)
spec->loopback.amplist = alc662_loopbacks;
#endif
+ codec->proc_widget_hook = print_realtek_coef;
return 0;
}
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_realtek[] = {
+static struct hda_codec_preset snd_hda_preset_realtek[] = {
{ .id = 0x10ec0260, .name = "ALC260", .patch = patch_alc260 },
{ .id = 0x10ec0262, .name = "ALC262", .patch = patch_alc262 },
{ .id = 0x10ec0267, .name = "ALC267", .patch = patch_alc268 },
{ .id = 0x10ec0889, .name = "ALC889", .patch = patch_alc883 },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:10ec*");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek HD-audio codec");
+
+static struct hda_codec_preset_list realtek_list = {
+ .preset = snd_hda_preset_realtek,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_realtek_init(void)
+{
+ return snd_hda_add_codec_preset(&realtek_list);
+}
+
+static void __exit patch_realtek_exit(void)
+{
+ snd_hda_delete_codec_preset(&realtek_list);
+}
+
+module_init(patch_realtek_init)
+module_exit(patch_realtek_exit)
#include <sound/core.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
/* si3054 verbs */
#define SI3054_VERB_READ_NODE 0x900
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_si3054[] = {
+static struct hda_codec_preset snd_hda_preset_si3054[] = {
{ .id = 0x163c3055, .name = "Si3054", .patch = patch_si3054 },
{ .id = 0x163c3155, .name = "Si3054", .patch = patch_si3054 },
{ .id = 0x11c13026, .name = "Si3054", .patch = patch_si3054 },
{}
};
+MODULE_ALIAS("snd-hda-codec-id:163c3055");
+MODULE_ALIAS("snd-hda-codec-id:163c3155");
+MODULE_ALIAS("snd-hda-codec-id:11c13026");
+MODULE_ALIAS("snd-hda-codec-id:11c13055");
+MODULE_ALIAS("snd-hda-codec-id:11c13155");
+MODULE_ALIAS("snd-hda-codec-id:10573055");
+MODULE_ALIAS("snd-hda-codec-id:10573057");
+MODULE_ALIAS("snd-hda-codec-id:10573155");
+MODULE_ALIAS("snd-hda-codec-id:11063288");
+MODULE_ALIAS("snd-hda-codec-id:15433155");
+MODULE_ALIAS("snd-hda-codec-id:18540018");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Si3054 HD-audio modem codec");
+
+static struct hda_codec_preset_list si3054_list = {
+ .preset = snd_hda_preset_si3054,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_si3054_init(void)
+{
+ return snd_hda_add_codec_preset(&si3054_list);
+}
+
+static void __exit patch_si3054_exit(void)
+{
+ snd_hda_delete_codec_preset(&si3054_list);
+}
+
+module_init(patch_si3054_init)
+module_exit(patch_si3054_exit)
#include <linux/pci.h>
#include <sound/core.h>
#include <sound/asoundef.h>
+#include <sound/jack.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
#include "hda_beep.h"
-#define NUM_CONTROL_ALLOC 32
-
-#define STAC_VREF_EVENT 0x00
-#define STAC_INSERT_EVENT 0x10
-#define STAC_PWR_EVENT 0x20
-#define STAC_HP_EVENT 0x30
+enum {
+ STAC_VREF_EVENT = 1,
+ STAC_INSERT_EVENT,
+ STAC_PWR_EVENT,
+ STAC_HP_EVENT,
+};
enum {
STAC_REF,
};
enum {
+ STAC_92HD73XX_NO_JD, /* no jack-detection */
STAC_92HD73XX_REF,
- STAC_DELL_M6,
+ STAC_DELL_M6_AMIC,
+ STAC_DELL_M6_DMIC,
+ STAC_DELL_M6_BOTH,
STAC_DELL_EQ,
STAC_92HD73XX_MODELS
};
STAC_92HD71BXX_REF,
STAC_DELL_M4_1,
STAC_DELL_M4_2,
+ STAC_DELL_M4_3,
STAC_HP_M4,
STAC_92HD71BXX_MODELS
};
};
enum {
+ STAC_D965_REF_NO_JD, /* no jack-detection */
STAC_D965_REF,
STAC_D965_3ST,
STAC_D965_5ST,
STAC_927X_MODELS
};
+struct sigmatel_event {
+ hda_nid_t nid;
+ unsigned char type;
+ unsigned char tag;
+ int data;
+};
+
+struct sigmatel_jack {
+ hda_nid_t nid;
+ int type;
+ struct snd_jack *jack;
+};
+
struct sigmatel_spec {
struct snd_kcontrol_new *mixers[4];
unsigned int num_mixers;
int board_config;
+ unsigned int eapd_switch: 1;
unsigned int surr_switch: 1;
- unsigned int line_switch: 1;
- unsigned int mic_switch: 1;
unsigned int alt_switch: 1;
unsigned int hp_detect: 1;
unsigned int spdif_mute: 1;
hda_nid_t *pwr_nids;
hda_nid_t *dac_list;
+ /* jack detection */
+ struct snd_array jacks;
+
+ /* events */
+ struct snd_array events;
+
/* playback */
struct hda_input_mux *mono_mux;
struct hda_input_mux *amp_mux;
unsigned int cur_mmux;
struct hda_multi_out multiout;
hda_nid_t dac_nids[5];
+ hda_nid_t hp_dacs[5];
+ hda_nid_t speaker_dacs[5];
/* capture */
hda_nid_t *adc_nids;
hda_nid_t *pin_nids;
unsigned int num_pins;
unsigned int *pin_configs;
- unsigned int *bios_pin_configs;
/* codec specific stuff */
struct hda_verb *init;
/* i/o switches */
unsigned int io_switch[2];
unsigned int clfe_swap;
- unsigned int hp_switch; /* NID of HP as line-out */
+ hda_nid_t line_switch; /* shared line-in for input and output */
+ hda_nid_t mic_switch; /* shared mic-in for input and output */
+ hda_nid_t hp_switch; /* NID of HP as line-out */
unsigned int aloopback;
struct hda_pcm pcm_rec[2]; /* PCM information */
/* dynamic controls and input_mux */
struct auto_pin_cfg autocfg;
- unsigned int num_kctl_alloc, num_kctl_used;
- struct snd_kcontrol_new *kctl_alloc;
+ struct snd_array kctls;
struct hda_input_mux private_dimux;
struct hda_input_mux private_imux;
struct hda_input_mux private_smux;
};
#define STAC92HD73_DAC_COUNT 5
-static hda_nid_t stac92hd73xx_dac_nids[STAC92HD73_DAC_COUNT] = {
- 0x15, 0x16, 0x17, 0x18, 0x19,
-};
static hda_nid_t stac92hd73xx_mux_nids[4] = {
0x28, 0x29, 0x2a, 0x2b,
0x11, 0x12, 0
};
-#define STAC92HD81_DAC_COUNT 2
#define STAC92HD83_DAC_COUNT 3
-static hda_nid_t stac92hd83xxx_dac_nids[STAC92HD73_DAC_COUNT] = {
- 0x13, 0x14, 0x22,
-};
static hda_nid_t stac92hd83xxx_dmux_nids[2] = {
0x17, 0x18,
0x24, 0x25,
};
-static hda_nid_t stac92hd71bxx_dac_nids[1] = {
- 0x10, /*0x11, */
-};
-
#define STAC92HD71BXX_NUM_DMICS 2
static hda_nid_t stac92hd71bxx_dmic_nids[STAC92HD71BXX_NUM_DMICS + 1] = {
0x18, 0x19, 0
else
nid = codec->slave_dig_outs[smux_idx - 1];
if (spec->cur_smux[smux_idx] == smux->num_items - 1)
- val = AMP_OUT_MUTE;
+ val = HDA_AMP_MUTE;
else
- val = AMP_OUT_UNMUTE;
+ val = 0;
/* un/mute SPDIF out */
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_AMP_GAIN_MUTE, val);
+ snd_hda_codec_amp_stereo(codec, nid, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, val);
}
return 0;
}
static struct hda_verb stac92hd73xx_6ch_core_init[] = {
/* set master volume and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup audio connections */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00},
- { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02},
/* setup adcs to point to mixer */
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
{ 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
/* set master volume to max value without distortion
* and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
- /* setup audio connections */
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x02},
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01},
/* setup adcs to point to mixer */
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
{ 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
static struct hda_verb dell_m6_core_init[] = {
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup audio connections */
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x02},
/* setup adcs to point to mixer */
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
{ 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
static struct hda_verb stac92hd73xx_8ch_core_init[] = {
/* set master volume and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup audio connections */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00},
- { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01},
- { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02},
- /* connect hp ports to dac3 */
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x03},
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x03},
/* setup adcs to point to mixer */
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
{ 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
static struct hda_verb stac92hd73xx_10ch_core_init[] = {
/* set master volume and direct control */
{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* setup audio connections */
- { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x00 },
- { 0x10, AC_VERB_SET_CONNECT_SEL, 0x01 },
- { 0x11, AC_VERB_SET_CONNECT_SEL, 0x02 },
/* dac3 is connected to import3 mux */
{ 0x18, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f},
- /* connect hp ports to dac4 */
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x04},
- { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x04},
/* setup adcs to point to mixer */
{ 0x20, AC_VERB_SET_CONNECT_SEL, 0x0b},
{ 0x21, AC_VERB_SET_CONNECT_SEL, 0x0b},
/* power state controls amps */
{ 0x01, AC_VERB_SET_EAPD, 1 << 2},
+ {}
};
static struct hda_verb stac92hd71bxx_core_init[] = {
/* set master volume and direct control */
{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* connect headphone jack to dac1 */
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
/* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {}
};
#define HD_DISABLE_PORTF 2
/* set master volume and direct control */
{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
- /* connect headphone jack to dac1 */
- { 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
/* unmute right and left channels for nodes 0x0a, 0xd */
{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x1b, 0, HDA_INPUT),
- HDA_CODEC_MUTE("DAC0 Capture Switch", 0x1b, 0, HDA_INPUT),
+ HDA_CODEC_VOLUME("DAC0 Capture Volume", 0x1b, 0x3, HDA_INPUT),
+ HDA_CODEC_MUTE("DAC0 Capture Switch", 0x1b, 0x3, HDA_INPUT),
- HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x1b, 0x1, HDA_INPUT),
- HDA_CODEC_MUTE("DAC1 Capture Switch", 0x1b, 0x1, HDA_INPUT),
+ HDA_CODEC_VOLUME("DAC1 Capture Volume", 0x1b, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("DAC1 Capture Switch", 0x1b, 0x4, HDA_INPUT),
- HDA_CODEC_VOLUME("Front Mic Capture Volume", 0x1b, 0x2, HDA_INPUT),
- HDA_CODEC_MUTE("Front Mic Capture Switch", 0x1b, 0x2, HDA_INPUT),
+ HDA_CODEC_VOLUME("Front Mic Capture Volume", 0x1b, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Capture Switch", 0x1b, 0x0, HDA_INPUT),
- HDA_CODEC_VOLUME("Line In Capture Volume", 0x1b, 0x3, HDA_INPUT),
- HDA_CODEC_MUTE("Line In Capture Switch", 0x1b, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line In Capture Volume", 0x1b, 0x2, HDA_INPUT),
+ HDA_CODEC_MUTE("Line In Capture Switch", 0x1b, 0x2, HDA_INPUT),
/*
- HDA_CODEC_VOLUME("Mic Capture Volume", 0x1b, 0x4, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Capture Switch", 0x1b 0x4, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Capture Volume", 0x1b, 0x1, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Capture Switch", 0x1b 0x1, HDA_INPUT),
*/
{ } /* end */
};
NULL
};
+static void stac92xx_free_kctls(struct hda_codec *codec);
+static int stac92xx_add_jack(struct hda_codec *codec, hda_nid_t nid, int type);
+
static int stac92xx_build_controls(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
int err;
int i;
}
if (spec->num_dmuxes > 0) {
stac_dmux_mixer.count = spec->num_dmuxes;
- err = snd_ctl_add(codec->bus->card,
+ err = snd_hda_ctl_add(codec,
snd_ctl_new1(&stac_dmux_mixer, codec));
if (err < 0)
return err;
spec->spdif_mute = 1;
}
stac_smux_mixer.count = spec->num_smuxes;
- err = snd_ctl_add(codec->bus->card,
+ err = snd_hda_ctl_add(codec,
snd_ctl_new1(&stac_smux_mixer, codec));
if (err < 0)
return err;
return err;
}
+ stac92xx_free_kctls(codec); /* no longer needed */
+
+ /* create jack input elements */
+ if (spec->hp_detect) {
+ for (i = 0; i < cfg->hp_outs; i++) {
+ int type = SND_JACK_HEADPHONE;
+ nid = cfg->hp_pins[i];
+ /* jack detection */
+ if (cfg->hp_outs == i)
+ type |= SND_JACK_LINEOUT;
+ err = stac92xx_add_jack(codec, nid, type);
+ if (err < 0)
+ return err;
+ }
+ }
+ for (i = 0; i < cfg->line_outs; i++) {
+ err = stac92xx_add_jack(codec, cfg->line_out_pins[i],
+ SND_JACK_LINEOUT);
+ if (err < 0)
+ return err;
+ }
+ for (i = 0; i < AUTO_PIN_LAST; i++) {
+ nid = cfg->input_pins[i];
+ if (nid) {
+ err = stac92xx_add_jack(codec, nid,
+ SND_JACK_MICROPHONE);
+ if (err < 0)
+ return err;
+ }
+ }
+
return 0;
}
static unsigned int *stac92hd73xx_brd_tbl[STAC_92HD73XX_MODELS] = {
[STAC_92HD73XX_REF] = ref92hd73xx_pin_configs,
- [STAC_DELL_M6] = dell_m6_pin_configs,
+ [STAC_DELL_M6_AMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_DMIC] = dell_m6_pin_configs,
+ [STAC_DELL_M6_BOTH] = dell_m6_pin_configs,
[STAC_DELL_EQ] = dell_m6_pin_configs,
};
static const char *stac92hd73xx_models[STAC_92HD73XX_MODELS] = {
+ [STAC_92HD73XX_NO_JD] = "no-jd",
[STAC_92HD73XX_REF] = "ref",
- [STAC_DELL_M6] = "dell-m6",
+ [STAC_DELL_M6_AMIC] = "dell-m6-amic",
+ [STAC_DELL_M6_DMIC] = "dell-m6-dmic",
+ [STAC_DELL_M6_BOTH] = "dell-m6",
[STAC_DELL_EQ] = "dell-eq",
};
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD73XX_REF),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0254,
- "unknown Dell", STAC_DELL_M6),
+ "Dell Studio 1535", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0255,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0256,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0257,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_BOTH),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025e,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x025f,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_AMIC),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0271,
- "unknown Dell", STAC_DELL_M6),
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0272,
+ "unknown Dell", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x029f,
+ "Dell Studio 1537", STAC_DELL_M6_DMIC),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
+ "Dell Studio 17", STAC_DELL_M6_DMIC),
{} /* terminator */
};
/* SigmaTel reference board */
SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
"DFI LanParty", STAC_92HD71BXX_REF),
+ {} /* terminator */
};
static unsigned int ref92hd71bxx_pin_configs[11] = {
0x40f000f0, 0x044413b0, 0x044413b0,
};
+static unsigned int dell_m4_3_pin_configs[11] = {
+ 0x0421101f, 0x04a11221, 0x90a70330, 0x90170110,
+ 0x40f000f0, 0x40f000f0, 0x40f000f0, 0x90a000f0,
+ 0x40f000f0, 0x044413b0, 0x044413b0,
+};
+
static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
[STAC_92HD71BXX_REF] = ref92hd71bxx_pin_configs,
[STAC_DELL_M4_1] = dell_m4_1_pin_configs,
[STAC_DELL_M4_2] = dell_m4_2_pin_configs,
+ [STAC_DELL_M4_3] = dell_m4_3_pin_configs,
[STAC_HP_M4] = NULL,
};
[STAC_92HD71BXX_REF] = "ref",
[STAC_DELL_M4_1] = "dell-m4-1",
[STAC_DELL_M4_2] = "dell-m4-2",
+ [STAC_DELL_M4_3] = "dell-m4-3",
[STAC_HP_M4] = "hp-m4",
};
"HP dv5", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4,
"HP dv7", STAC_HP_M4),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
+ "HP dv7", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
"unknown HP", STAC_HP_M4),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
"unknown Dell", STAC_DELL_M4_2),
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0264,
"unknown Dell", STAC_DELL_M4_2),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02aa,
+ "unknown Dell", STAC_DELL_M4_3),
{} /* terminator */
};
};
static unsigned int *stac927x_brd_tbl[STAC_927X_MODELS] = {
+ [STAC_D965_REF_NO_JD] = ref927x_pin_configs,
[STAC_D965_REF] = ref927x_pin_configs,
[STAC_D965_3ST] = d965_3st_pin_configs,
[STAC_D965_5ST] = d965_5st_pin_configs,
};
static const char *stac927x_models[STAC_927X_MODELS] = {
+ [STAC_D965_REF_NO_JD] = "ref-no-jd",
[STAC_D965_REF] = "ref",
[STAC_D965_3ST] = "3stack",
[STAC_D965_5ST] = "5stack",
int i;
struct sigmatel_spec *spec = codec->spec;
- if (! spec->bios_pin_configs) {
- spec->bios_pin_configs = kcalloc(spec->num_pins,
- sizeof(*spec->bios_pin_configs), GFP_KERNEL);
- if (! spec->bios_pin_configs)
- return -ENOMEM;
- }
+ kfree(spec->pin_configs);
+ spec->pin_configs = kcalloc(spec->num_pins, sizeof(*spec->pin_configs),
+ GFP_KERNEL);
+ if (!spec->pin_configs)
+ return -ENOMEM;
for (i = 0; i < spec->num_pins; i++) {
hda_nid_t nid = spec->pin_nids[i];
AC_VERB_GET_CONFIG_DEFAULT, 0x00);
snd_printdd(KERN_INFO "hda_codec: pin nid %2.2x bios pin config %8.8x\n",
nid, pin_cfg);
- spec->bios_pin_configs[i] = pin_cfg;
+ spec->pin_configs[i] = pin_cfg;
}
return 0;
spec->pin_configs[i]);
}
+static int stac_save_pin_cfgs(struct hda_codec *codec, unsigned int *pins)
+{
+ struct sigmatel_spec *spec = codec->spec;
+
+ if (!pins)
+ return stac92xx_save_bios_config_regs(codec);
+
+ kfree(spec->pin_configs);
+ spec->pin_configs = kmemdup(pins,
+ spec->num_pins * sizeof(*pins),
+ GFP_KERNEL);
+ if (!spec->pin_configs)
+ return -ENOMEM;
+
+ stac92xx_set_config_regs(codec);
+ return 0;
+}
+
+static void stac_change_pin_config(struct hda_codec *codec, hda_nid_t nid,
+ unsigned int cfg)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ int i;
+
+ for (i = 0; i < spec->num_pins; i++) {
+ if (spec->pin_nids[i] == nid) {
+ spec->pin_configs[i] = cfg;
+ stac92xx_set_config_reg(codec, nid, cfg);
+ break;
+ }
+ }
+}
+
/*
* Analog playback callbacks
*/
if (spec->powerdown_adcs) {
msleep(40);
- snd_hda_codec_write_cache(codec, nid, 0,
+ snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
}
snd_hda_codec_setup_stream(codec, nid, stream_tag, 0, format);
snd_hda_codec_cleanup_stream(codec, nid);
if (spec->powerdown_adcs)
- snd_hda_codec_write_cache(codec, nid, 0,
+ snd_hda_codec_write(codec, nid, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
return 0;
}
return 0;
}
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
+ unsigned char type);
+
static int stac92xx_hp_switch_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
/* check to be sure that the ports are upto date with
* switch changes
*/
- codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
+ stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
return 1;
}
* appropriately according to the pin direction
*/
if (spec->hp_detect)
- codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
+ stac_issue_unsol_event(codec, nid, STAC_HP_EVENT);
return 1;
}
{
struct snd_kcontrol_new *knew;
- if (spec->num_kctl_used >= spec->num_kctl_alloc) {
- int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
-
- knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL); /* array + terminator */
- if (! knew)
- return -ENOMEM;
- if (spec->kctl_alloc) {
- memcpy(knew, spec->kctl_alloc, sizeof(*knew) * spec->num_kctl_alloc);
- kfree(spec->kctl_alloc);
- }
- spec->kctl_alloc = knew;
- spec->num_kctl_alloc = num;
- }
-
- knew = &spec->kctl_alloc[spec->num_kctl_used];
+ snd_array_init(&spec->kctls, sizeof(*knew), 32);
+ knew = snd_array_new(&spec->kctls);
+ if (!knew)
+ return -ENOMEM;
*knew = *ktemp;
knew->index = idx;
knew->name = kstrdup(name, GFP_KERNEL);
if (!knew->name)
return -ENOMEM;
knew->private_value = val;
- spec->num_kctl_used++;
return 0;
}
return stac92xx_add_control_idx(spec, type, 0, name, val);
}
-/* flag inputs as additional dynamic lineouts */
-static int stac92xx_add_dyn_out_pins(struct hda_codec *codec, struct auto_pin_cfg *cfg)
+/* check whether the line-input can be used as line-out */
+static hda_nid_t check_line_out_switch(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- unsigned int wcaps, wtype;
- int i, num_dacs = 0;
-
- /* use the wcaps cache to count all DACs available for line-outs */
- for (i = 0; i < codec->num_nodes; i++) {
- wcaps = codec->wcaps[i];
- wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ hda_nid_t nid;
+ unsigned int pincap;
- if (wtype == AC_WID_AUD_OUT && !(wcaps & AC_WCAP_DIGITAL))
- num_dacs++;
- }
+ if (cfg->line_out_type != AUTO_PIN_LINE_OUT)
+ return 0;
+ nid = cfg->input_pins[AUTO_PIN_LINE];
+ pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+ if (pincap & AC_PINCAP_OUT)
+ return nid;
+ return 0;
+}
- snd_printdd("%s: total dac count=%d\n", __func__, num_dacs);
-
- switch (cfg->line_outs) {
- case 3:
- /* add line-in as side */
- if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 3) {
- cfg->line_out_pins[cfg->line_outs] =
- cfg->input_pins[AUTO_PIN_LINE];
- spec->line_switch = 1;
- cfg->line_outs++;
- }
- break;
- case 2:
- /* add line-in as clfe and mic as side */
- if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 2) {
- cfg->line_out_pins[cfg->line_outs] =
- cfg->input_pins[AUTO_PIN_LINE];
- spec->line_switch = 1;
- cfg->line_outs++;
- }
- if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 3) {
- cfg->line_out_pins[cfg->line_outs] =
- cfg->input_pins[AUTO_PIN_MIC];
- spec->mic_switch = 1;
- cfg->line_outs++;
- }
- break;
- case 1:
- /* add line-in as surr and mic as clfe */
- if (cfg->input_pins[AUTO_PIN_LINE] && num_dacs > 1) {
- cfg->line_out_pins[cfg->line_outs] =
- cfg->input_pins[AUTO_PIN_LINE];
- spec->line_switch = 1;
- cfg->line_outs++;
- }
- if (cfg->input_pins[AUTO_PIN_MIC] && num_dacs > 2) {
- cfg->line_out_pins[cfg->line_outs] =
- cfg->input_pins[AUTO_PIN_MIC];
- spec->mic_switch = 1;
- cfg->line_outs++;
+/* check whether the mic-input can be used as line-out */
+static hda_nid_t check_mic_out_switch(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int def_conf, pincap;
+ unsigned int mic_pin;
+
+ if (cfg->line_out_type != AUTO_PIN_LINE_OUT)
+ return 0;
+ mic_pin = AUTO_PIN_MIC;
+ for (;;) {
+ hda_nid_t nid = cfg->input_pins[mic_pin];
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ /* some laptops have an internal analog microphone
+ * which can't be used as a output */
+ if (get_defcfg_connect(def_conf) != AC_JACK_PORT_FIXED) {
+ pincap = snd_hda_param_read(codec, nid, AC_PAR_PIN_CAP);
+ if (pincap & AC_PINCAP_OUT)
+ return nid;
}
- break;
+ if (mic_pin == AUTO_PIN_MIC)
+ mic_pin = AUTO_PIN_FRONT_MIC;
+ else
+ break;
}
-
return 0;
}
-
static int is_in_dac_nids(struct sigmatel_spec *spec, hda_nid_t nid)
{
int i;
return 0;
}
+static int check_all_dac_nids(struct sigmatel_spec *spec, hda_nid_t nid)
+{
+ int i;
+ if (is_in_dac_nids(spec, nid))
+ return 1;
+ for (i = 0; i < spec->autocfg.hp_outs; i++)
+ if (spec->hp_dacs[i] == nid)
+ return 1;
+ for (i = 0; i < spec->autocfg.speaker_outs; i++)
+ if (spec->speaker_dacs[i] == nid)
+ return 1;
+ return 0;
+}
+
+static hda_nid_t get_unassigned_dac(struct hda_codec *codec, hda_nid_t nid)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ int j, conn_len;
+ hda_nid_t conn[HDA_MAX_CONNECTIONS];
+ unsigned int wcaps, wtype;
+
+ conn_len = snd_hda_get_connections(codec, nid, conn,
+ HDA_MAX_CONNECTIONS);
+ for (j = 0; j < conn_len; j++) {
+ wcaps = snd_hda_param_read(codec, conn[j],
+ AC_PAR_AUDIO_WIDGET_CAP);
+ wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
+ /* we check only analog outputs */
+ if (wtype != AC_WID_AUD_OUT || (wcaps & AC_WCAP_DIGITAL))
+ continue;
+ /* if this route has a free DAC, assign it */
+ if (!check_all_dac_nids(spec, conn[j])) {
+ if (conn_len > 1) {
+ /* select this DAC in the pin's input mux */
+ snd_hda_codec_write_cache(codec, nid, 0,
+ AC_VERB_SET_CONNECT_SEL, j);
+ }
+ return conn[j];
+ }
+ }
+ return 0;
+}
+
+static int add_spec_dacs(struct sigmatel_spec *spec, hda_nid_t nid);
+static int add_spec_extra_dacs(struct sigmatel_spec *spec, hda_nid_t nid);
+
/*
* Fill in the dac_nids table from the parsed pin configuration
* This function only works when every pin in line_out_pins[]
* codecs are not connected directly to a DAC, such as the 9200
* and 9202/925x. For those, dac_nids[] must be hard-coded.
*/
-static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec,
- struct auto_pin_cfg *cfg)
+static int stac92xx_auto_fill_dac_nids(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- int i, j, conn_len = 0;
- hda_nid_t nid, conn[HDA_MAX_CONNECTIONS];
- unsigned int wcaps, wtype;
+ struct auto_pin_cfg *cfg = &spec->autocfg;
+ int i;
+ hda_nid_t nid, dac;
for (i = 0; i < cfg->line_outs; i++) {
nid = cfg->line_out_pins[i];
- conn_len = snd_hda_get_connections(codec, nid, conn,
- HDA_MAX_CONNECTIONS);
- for (j = 0; j < conn_len; j++) {
- wcaps = snd_hda_param_read(codec, conn[j],
- AC_PAR_AUDIO_WIDGET_CAP);
- wtype = (wcaps & AC_WCAP_TYPE) >> AC_WCAP_TYPE_SHIFT;
- if (wtype != AC_WID_AUD_OUT ||
- (wcaps & AC_WCAP_DIGITAL))
- continue;
- /* conn[j] is a DAC routed to this line-out */
- if (!is_in_dac_nids(spec, conn[j]))
- break;
- }
-
- if (j == conn_len) {
+ dac = get_unassigned_dac(codec, nid);
+ if (!dac) {
if (spec->multiout.num_dacs > 0) {
/* we have already working output pins,
* so let's drop the broken ones again
__func__, nid);
return -ENODEV;
}
+ add_spec_dacs(spec, dac);
+ }
- spec->multiout.dac_nids[i] = conn[j];
- spec->multiout.num_dacs++;
- if (conn_len > 1) {
- /* select this DAC in the pin's input mux */
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_CONNECT_SEL, j);
+ /* add line-in as output */
+ nid = check_line_out_switch(codec);
+ if (nid) {
+ dac = get_unassigned_dac(codec, nid);
+ if (dac) {
+ snd_printdd("STAC: Add line-in 0x%x as output %d\n",
+ nid, cfg->line_outs);
+ cfg->line_out_pins[cfg->line_outs] = nid;
+ cfg->line_outs++;
+ spec->line_switch = nid;
+ add_spec_dacs(spec, dac);
+ }
+ }
+ /* add mic as output */
+ nid = check_mic_out_switch(codec);
+ if (nid) {
+ dac = get_unassigned_dac(codec, nid);
+ if (dac) {
+ snd_printdd("STAC: Add mic-in 0x%x as output %d\n",
+ nid, cfg->line_outs);
+ cfg->line_out_pins[cfg->line_outs] = nid;
+ cfg->line_outs++;
+ spec->mic_switch = nid;
+ add_spec_dacs(spec, dac);
+ }
+ }
+ for (i = 0; i < cfg->hp_outs; i++) {
+ nid = cfg->hp_pins[i];
+ dac = get_unassigned_dac(codec, nid);
+ if (dac) {
+ if (!spec->multiout.hp_nid)
+ spec->multiout.hp_nid = dac;
+ else
+ add_spec_extra_dacs(spec, dac);
}
+ spec->hp_dacs[i] = dac;
+ }
+
+ for (i = 0; i < cfg->speaker_outs; i++) {
+ nid = cfg->speaker_pins[i];
+ dac = get_unassigned_dac(codec, nid);
+ if (dac)
+ add_spec_extra_dacs(spec, dac);
+ spec->speaker_dacs[i] = dac;
}
- snd_printd("dac_nids=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
+ snd_printd("stac92xx: dac_nids=%d (0x%x/0x%x/0x%x/0x%x/0x%x)\n",
spec->multiout.num_dacs,
spec->multiout.dac_nids[0],
spec->multiout.dac_nids[1],
spec->multiout.dac_nids[2],
spec->multiout.dac_nids[3],
spec->multiout.dac_nids[4]);
+
return 0;
}
static int add_spec_dacs(struct sigmatel_spec *spec, hda_nid_t nid)
{
- if (!spec->multiout.hp_nid)
- spec->multiout.hp_nid = nid;
- else if (spec->multiout.num_dacs > 4) {
+ if (spec->multiout.num_dacs > 4) {
printk(KERN_WARNING "stac92xx: No space for DAC 0x%x\n", nid);
return 1;
} else {
return 0;
}
-static int check_in_dac_nids(struct sigmatel_spec *spec, hda_nid_t nid)
+static int add_spec_extra_dacs(struct sigmatel_spec *spec, hda_nid_t nid)
{
- if (is_in_dac_nids(spec, nid))
- return 1;
+ int i;
+ for (i = 0; i < ARRAY_SIZE(spec->multiout.extra_out_nid); i++) {
+ if (!spec->multiout.extra_out_nid[i]) {
+ spec->multiout.extra_out_nid[i] = nid;
+ return 0;
+ }
+ }
+ printk(KERN_WARNING "stac92xx: No space for extra DAC 0x%x\n", nid);
+ return 1;
+}
+
+static int is_unique_dac(struct sigmatel_spec *spec, hda_nid_t nid)
+{
+ int i;
+
+ if (spec->autocfg.line_outs != 1)
+ return 0;
if (spec->multiout.hp_nid == nid)
- return 1;
- return 0;
+ return 0;
+ for (i = 0; i < ARRAY_SIZE(spec->multiout.extra_out_nid); i++)
+ if (spec->multiout.extra_out_nid[i] == nid)
+ return 0;
+ return 1;
}
/* add playback controls from the parsed DAC table */
static int stac92xx_auto_create_multi_out_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
+ struct sigmatel_spec *spec = codec->spec;
static const char *chname[4] = {
"Front", "Surround", NULL /*CLFE*/, "Side"
};
hda_nid_t nid = 0;
int i, err;
+ unsigned int wid_caps;
- struct sigmatel_spec *spec = codec->spec;
- unsigned int wid_caps, pincap;
-
-
- for (i = 0; i < cfg->line_outs && i < spec->multiout.num_dacs; i++) {
- if (!spec->multiout.dac_nids[i])
- continue;
-
+ for (i = 0; i < cfg->line_outs && spec->multiout.dac_nids[i]; i++) {
nid = spec->multiout.dac_nids[i];
-
if (i == 2) {
/* Center/LFE */
err = create_controls(spec, "Center", nid, 1);
}
} else {
- err = create_controls(spec, chname[i], nid, 3);
+ const char *name = chname[i];
+ /* if it's a single DAC, assign a better name */
+ if (!i && is_unique_dac(spec, nid)) {
+ switch (cfg->line_out_type) {
+ case AUTO_PIN_HP_OUT:
+ name = "Headphone";
+ break;
+ case AUTO_PIN_SPEAKER_OUT:
+ name = "Speaker";
+ break;
+ }
+ }
+ err = create_controls(spec, name, nid, 3);
if (err < 0)
return err;
}
}
- if ((spec->multiout.num_dacs - cfg->line_outs) > 0 &&
- cfg->hp_outs && !spec->multiout.hp_nid)
- spec->multiout.hp_nid = nid;
-
- if (cfg->hp_outs > 1) {
+ if (cfg->hp_outs > 1 && cfg->line_out_type == AUTO_PIN_LINE_OUT) {
err = stac92xx_add_control(spec,
STAC_CTL_WIDGET_HP_SWITCH,
"Headphone as Line Out Switch",
}
if (spec->line_switch) {
- nid = cfg->input_pins[AUTO_PIN_LINE];
- pincap = snd_hda_param_read(codec, nid,
- AC_PAR_PIN_CAP);
- if (pincap & AC_PINCAP_OUT) {
- err = stac92xx_add_control(spec,
- STAC_CTL_WIDGET_IO_SWITCH,
- "Line In as Output Switch", nid << 8);
- if (err < 0)
- return err;
- }
+ err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
+ "Line In as Output Switch",
+ spec->line_switch << 8);
+ if (err < 0)
+ return err;
}
if (spec->mic_switch) {
- unsigned int def_conf;
- unsigned int mic_pin = AUTO_PIN_MIC;
-again:
- nid = cfg->input_pins[mic_pin];
- def_conf = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_CONFIG_DEFAULT, 0);
- /* some laptops have an internal analog microphone
- * which can't be used as a output */
- if (get_defcfg_connect(def_conf) != AC_JACK_PORT_FIXED) {
- pincap = snd_hda_param_read(codec, nid,
- AC_PAR_PIN_CAP);
- if (pincap & AC_PINCAP_OUT) {
- err = stac92xx_add_control(spec,
- STAC_CTL_WIDGET_IO_SWITCH,
- "Mic as Output Switch", (nid << 8) | 1);
- nid = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
- if (!check_in_dac_nids(spec, nid))
- add_spec_dacs(spec, nid);
- if (err < 0)
- return err;
- }
- } else if (mic_pin == AUTO_PIN_MIC) {
- mic_pin = AUTO_PIN_FRONT_MIC;
- goto again;
- }
+ err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
+ "Mic as Output Switch",
+ (spec->mic_switch << 8) | 1);
+ if (err < 0)
+ return err;
}
return 0;
{
struct sigmatel_spec *spec = codec->spec;
hda_nid_t nid;
- int i, old_num_dacs, err;
+ int i, err, nums;
- old_num_dacs = spec->multiout.num_dacs;
+ nums = 0;
for (i = 0; i < cfg->hp_outs; i++) {
+ static const char *pfxs[] = {
+ "Headphone", "Headphone2", "Headphone3",
+ };
unsigned int wid_caps = get_wcaps(codec, cfg->hp_pins[i]);
if (wid_caps & AC_WCAP_UNSOL_CAP)
spec->hp_detect = 1;
- nid = snd_hda_codec_read(codec, cfg->hp_pins[i], 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
- if (check_in_dac_nids(spec, nid))
- nid = 0;
- if (! nid)
+ if (nums >= ARRAY_SIZE(pfxs))
continue;
- add_spec_dacs(spec, nid);
- }
- for (i = 0; i < cfg->speaker_outs; i++) {
- nid = snd_hda_codec_read(codec, cfg->speaker_pins[i], 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
- if (check_in_dac_nids(spec, nid))
- nid = 0;
- if (! nid)
+ nid = spec->hp_dacs[i];
+ if (!nid)
continue;
- add_spec_dacs(spec, nid);
- }
- for (i = 0; i < cfg->line_outs; i++) {
- nid = snd_hda_codec_read(codec, cfg->line_out_pins[i], 0,
- AC_VERB_GET_CONNECT_LIST, 0) & 0xff;
- if (check_in_dac_nids(spec, nid))
- nid = 0;
- if (! nid)
- continue;
- add_spec_dacs(spec, nid);
+ err = create_controls(spec, pfxs[nums++], nid, 3);
+ if (err < 0)
+ return err;
}
- for (i = old_num_dacs; i < spec->multiout.num_dacs; i++) {
+ nums = 0;
+ for (i = 0; i < cfg->speaker_outs; i++) {
static const char *pfxs[] = {
"Speaker", "External Speaker", "Speaker2",
};
- err = create_controls(spec, pfxs[i - old_num_dacs],
- spec->multiout.dac_nids[i], 3);
- if (err < 0)
- return err;
- }
- if (spec->multiout.hp_nid) {
- err = create_controls(spec, "Headphone",
- spec->multiout.hp_nid, 3);
+ if (nums >= ARRAY_SIZE(pfxs))
+ continue;
+ nid = spec->speaker_dacs[i];
+ if (!nid)
+ continue;
+ err = create_controls(spec, pfxs[nums++], nid, 3);
if (err < 0)
return err;
}
-
return 0;
}
{
struct sigmatel_spec *spec = codec->spec;
int err;
- int hp_speaker_swap = 0;
if ((err = snd_hda_parse_pin_def_config(codec,
&spec->autocfg,
* speaker_outs so that the following routines can handle
* HP pins as primary outputs.
*/
+ snd_printdd("stac92xx: Enabling multi-HPs workaround\n");
memcpy(spec->autocfg.speaker_pins, spec->autocfg.line_out_pins,
sizeof(spec->autocfg.line_out_pins));
spec->autocfg.speaker_outs = spec->autocfg.line_outs;
memcpy(spec->autocfg.line_out_pins, spec->autocfg.hp_pins,
sizeof(spec->autocfg.hp_pins));
spec->autocfg.line_outs = spec->autocfg.hp_outs;
- hp_speaker_swap = 1;
+ spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
+ spec->autocfg.hp_outs = 0;
}
if (spec->autocfg.mono_out_pin) {
int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
AC_PINCTL_OUT_EN);
}
- if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) < 0)
- return err;
- if (spec->multiout.num_dacs == 0)
- if ((err = stac92xx_auto_fill_dac_nids(codec, &spec->autocfg)) < 0)
+ if (!spec->multiout.num_dacs) {
+ err = stac92xx_auto_fill_dac_nids(codec);
+ if (err < 0)
return err;
+ }
err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg);
}
#endif
- if (hp_speaker_swap == 1) {
- /* Restore the hp_outs and line_outs */
- memcpy(spec->autocfg.hp_pins, spec->autocfg.line_out_pins,
- sizeof(spec->autocfg.line_out_pins));
- spec->autocfg.hp_outs = spec->autocfg.line_outs;
- memcpy(spec->autocfg.line_out_pins, spec->autocfg.speaker_pins,
- sizeof(spec->autocfg.speaker_pins));
- spec->autocfg.line_outs = spec->autocfg.speaker_outs;
- memset(spec->autocfg.speaker_pins, 0,
- sizeof(spec->autocfg.speaker_pins));
- spec->autocfg.speaker_outs = 0;
- }
-
err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg);
if (err < 0)
if (dig_in && spec->autocfg.dig_in_pin)
spec->dig_in_nid = dig_in;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux;
- spec->dinput_mux = &spec->private_dimux;
+ if (!spec->dinput_mux)
+ spec->dinput_mux = &spec->private_dimux;
spec->sinput_mux = &spec->private_smux;
spec->mono_mux = &spec->private_mono_mux;
spec->amp_mux = &spec->private_amp_mux;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = 0x04;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux;
spec->dinput_mux = &spec->private_dimux;
AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
}
+static int stac92xx_add_jack(struct hda_codec *codec,
+ hda_nid_t nid, int type)
+{
+#ifdef CONFIG_SND_JACK
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_jack *jack;
+ int def_conf = snd_hda_codec_read(codec, nid,
+ 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
+ int connectivity = get_defcfg_connect(def_conf);
+ char name[32];
+
+ if (connectivity && connectivity != AC_JACK_PORT_FIXED)
+ return 0;
+
+ snd_array_init(&spec->jacks, sizeof(*jack), 32);
+ jack = snd_array_new(&spec->jacks);
+ if (!jack)
+ return -ENOMEM;
+ jack->nid = nid;
+ jack->type = type;
+
+ sprintf(name, "%s at %s %s Jack",
+ snd_hda_get_jack_type(def_conf),
+ snd_hda_get_jack_connectivity(def_conf),
+ snd_hda_get_jack_location(def_conf));
+
+ return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+#else
+ return 0;
+#endif
+}
+
+static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
+ unsigned char type, int data)
+{
+ struct sigmatel_event *event;
+
+ snd_array_init(&spec->events, sizeof(*event), 32);
+ event = snd_array_new(&spec->events);
+ if (!event)
+ return -ENOMEM;
+ event->nid = nid;
+ event->type = type;
+ event->tag = spec->events.used;
+ event->data = data;
+
+ return event->tag;
+}
+
+static struct sigmatel_event *stac_get_event(struct hda_codec *codec,
+ hda_nid_t nid, unsigned char type)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_event *event = spec->events.list;
+ int i;
+
+ for (i = 0; i < spec->events.used; i++, event++) {
+ if (event->nid == nid && event->type == type)
+ return event;
+ }
+ return NULL;
+}
+
+static struct sigmatel_event *stac_get_event_from_tag(struct hda_codec *codec,
+ unsigned char tag)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_event *event = spec->events.list;
+ int i;
+
+ for (i = 0; i < spec->events.used; i++, event++) {
+ if (event->tag == tag)
+ return event;
+ }
+ return NULL;
+}
+
static void enable_pin_detect(struct hda_codec *codec, hda_nid_t nid,
- unsigned int event)
+ unsigned int type)
{
- if (get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP)
- snd_hda_codec_write_cache(codec, nid, 0,
- AC_VERB_SET_UNSOLICITED_ENABLE,
- (AC_USRSP_EN | event));
+ struct sigmatel_event *event;
+ int tag;
+
+ if (!(get_wcaps(codec, nid) & AC_WCAP_UNSOL_CAP))
+ return;
+ event = stac_get_event(codec, nid, type);
+ if (event)
+ tag = event->tag;
+ else
+ tag = stac_add_event(codec->spec, nid, type, 0);
+ if (tag < 0)
+ return;
+ snd_hda_codec_write_cache(codec, nid, 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | tag);
}
static int is_nid_hp_pin(struct auto_pin_cfg *cfg, hda_nid_t nid)
/* power down inactive DACs */
hda_nid_t *dac;
for (dac = spec->dac_list; *dac; dac++)
- if (!is_in_dac_nids(spec, *dac) &&
- spec->multiout.hp_nid != *dac)
- snd_hda_codec_write_cache(codec, *dac, 0,
+ if (!check_all_dac_nids(spec, *dac))
+ snd_hda_codec_write(codec, *dac, 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
}
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable);
+
static int stac92xx_init(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
+ unsigned int gpio;
int i;
snd_hda_sequence_write(codec, spec->init);
/* power down adcs initially */
if (spec->powerdown_adcs)
for (i = 0; i < spec->num_adcs; i++)
- snd_hda_codec_write_cache(codec,
+ snd_hda_codec_write(codec,
spec->adc_nids[i], 0,
AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+
+ /* set up GPIO */
+ gpio = spec->gpio_data;
+ /* turn on EAPD statically when spec->eapd_switch isn't set.
+ * otherwise, unsol event will turn it on/off dynamically
+ */
+ if (!spec->eapd_switch)
+ gpio |= spec->eapd_mask;
+ stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, gpio);
+
/* set up pins */
if (spec->hp_detect) {
/* Enable unsolicited responses on the HP widget */
- for (i = 0; i < cfg->hp_outs; i++)
- enable_pin_detect(codec, cfg->hp_pins[i],
- STAC_HP_EVENT);
+ for (i = 0; i < cfg->hp_outs; i++) {
+ hda_nid_t nid = cfg->hp_pins[i];
+ enable_pin_detect(codec, nid, STAC_HP_EVENT);
+ }
/* force to enable the first line-out; the others are set up
* in unsol_event
*/
stac92xx_auto_set_pinctl(codec, spec->autocfg.line_out_pins[0],
- AC_PINCTL_OUT_EN);
- stac92xx_auto_init_hp_out(codec);
+ AC_PINCTL_OUT_EN);
/* fake event to set up pins */
- codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
+ STAC_HP_EVENT);
} else {
stac92xx_auto_init_multi_out(codec);
stac92xx_auto_init_hp_out(codec);
+ for (i = 0; i < cfg->hp_outs; i++)
+ stac_toggle_power_map(codec, cfg->hp_pins[i], 1);
}
for (i = 0; i < AUTO_PIN_LAST; i++) {
hda_nid_t nid = cfg->input_pins[i];
if (nid) {
- unsigned int pinctl;
+ unsigned int pinctl, conf;
if (i == AUTO_PIN_MIC || i == AUTO_PIN_FRONT_MIC) {
/* for mic pins, force to initialize */
pinctl = stac92xx_get_vref(codec, nid);
+ pinctl |= AC_PINCTL_IN_EN;
+ stac92xx_auto_set_pinctl(codec, nid, pinctl);
} else {
pinctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* if PINCTL already set then skip */
- if (pinctl & AC_PINCTL_IN_EN)
- continue;
+ if (!(pinctl & AC_PINCTL_IN_EN)) {
+ pinctl |= AC_PINCTL_IN_EN;
+ stac92xx_auto_set_pinctl(codec, nid,
+ pinctl);
+ }
+ }
+ conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ if (get_defcfg_connect(conf) != AC_JACK_PORT_FIXED) {
+ enable_pin_detect(codec, nid,
+ STAC_INSERT_EVENT);
+ stac_issue_unsol_event(codec, nid,
+ STAC_INSERT_EVENT);
}
- pinctl |= AC_PINCTL_IN_EN;
- stac92xx_auto_set_pinctl(codec, nid, pinctl);
}
}
for (i = 0; i < spec->num_dmics; i++)
stac92xx_auto_set_pinctl(codec, spec->dmic_nids[i],
AC_PINCTL_IN_EN);
+ if (cfg->dig_out_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
+ AC_PINCTL_OUT_EN);
+ if (cfg->dig_in_pin)
+ stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
+ AC_PINCTL_IN_EN);
for (i = 0; i < spec->num_pwrs; i++) {
- int event = is_nid_hp_pin(cfg, spec->pwr_nids[i])
- ? STAC_HP_EVENT : STAC_PWR_EVENT;
- int pinctl = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- int def_conf = snd_hda_codec_read(codec, spec->pwr_nids[i],
- 0, AC_VERB_GET_CONFIG_DEFAULT, 0);
- def_conf = get_defcfg_connect(def_conf);
+ hda_nid_t nid = spec->pwr_nids[i];
+ int pinctl, def_conf;
+
+ /* power on when no jack detection is available */
+ if (!spec->hp_detect) {
+ stac_toggle_power_map(codec, nid, 1);
+ continue;
+ }
+
+ if (is_nid_hp_pin(cfg, nid))
+ continue; /* already has an unsol event */
+
+ pinctl = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* outputs are only ports capable of power management
* any attempts on powering down a input port cause the
* referenced VREF to act quirky.
*/
- if (pinctl & AC_PINCTL_IN_EN)
+ if (pinctl & AC_PINCTL_IN_EN) {
+ stac_toggle_power_map(codec, nid, 1);
continue;
+ }
+ def_conf = snd_hda_codec_read(codec, nid, 0,
+ AC_VERB_GET_CONFIG_DEFAULT, 0);
+ def_conf = get_defcfg_connect(def_conf);
/* skip any ports that don't have jacks since presence
* detection is useless */
- if (def_conf && def_conf != AC_JACK_PORT_FIXED)
+ if (def_conf != AC_JACK_PORT_COMPLEX) {
+ if (def_conf != AC_JACK_PORT_NONE)
+ stac_toggle_power_map(codec, nid, 1);
continue;
- enable_pin_detect(codec, spec->pwr_nids[i], event | i);
- codec->patch_ops.unsol_event(codec, (event | i) << 26);
+ }
+ if (!stac_get_event(codec, nid, STAC_INSERT_EVENT)) {
+ enable_pin_detect(codec, nid, STAC_PWR_EVENT);
+ stac_issue_unsol_event(codec, nid, STAC_PWR_EVENT);
+ }
}
if (spec->dac_list)
stac92xx_power_down(codec);
- if (cfg->dig_out_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_out_pin,
- AC_PINCTL_OUT_EN);
- if (cfg->dig_in_pin)
- stac92xx_auto_set_pinctl(codec, cfg->dig_in_pin,
- AC_PINCTL_IN_EN);
+ return 0;
+}
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
+static void stac92xx_free_jacks(struct hda_codec *codec)
+{
+#ifdef CONFIG_SND_JACK
+ /* free jack instances manually when clearing/reconfiguring */
+ struct sigmatel_spec *spec = codec->spec;
+ if (!codec->bus->shutdown && spec->jacks.list) {
+ struct sigmatel_jack *jacks = spec->jacks.list;
+ int i;
+ for (i = 0; i < spec->jacks.used; i++)
+ snd_device_free(codec->bus->card, &jacks[i].jack);
+ }
+ snd_array_free(&spec->jacks);
+#endif
+}
- return 0;
+static void stac92xx_free_kctls(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+
+ if (spec->kctls.list) {
+ struct snd_kcontrol_new *kctl = spec->kctls.list;
+ int i;
+ for (i = 0; i < spec->kctls.used; i++)
+ kfree(kctl[i].name);
+ }
+ snd_array_free(&spec->kctls);
}
static void stac92xx_free(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
- int i;
if (! spec)
return;
- if (spec->kctl_alloc) {
- for (i = 0; i < spec->num_kctl_used; i++)
- kfree(spec->kctl_alloc[i].name);
- kfree(spec->kctl_alloc);
- }
-
- if (spec->bios_pin_configs)
- kfree(spec->bios_pin_configs);
+ kfree(spec->pin_configs);
+ stac92xx_free_jacks(codec);
+ snd_array_free(&spec->events);
kfree(spec);
snd_hda_detach_beep_device(codec);
* "xxx as Output" mixer switch
*/
struct sigmatel_spec *spec = codec->spec;
- struct auto_pin_cfg *cfg = &spec->autocfg;
- if ((nid == cfg->input_pins[AUTO_PIN_LINE] &&
- spec->line_switch) ||
- (nid == cfg->input_pins[AUTO_PIN_MIC] &&
- spec->mic_switch))
+ if (nid == spec->line_switch || nid == spec->mic_switch)
return;
}
pin_ctl & ~flag);
}
-static int get_hp_pin_presence(struct hda_codec *codec, hda_nid_t nid)
+static int get_pin_presence(struct hda_codec *codec, hda_nid_t nid)
{
if (!nid)
return 0;
if (snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_PIN_SENSE, 0x00)
- & (1 << 31)) {
- unsigned int pinctl;
- pinctl = snd_hda_codec_read(codec, nid, 0,
- AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
- if (pinctl & AC_PINCTL_IN_EN)
- return 0; /* mic- or line-input */
- else
- return 1; /* HP-output */
- }
+ & (1 << 31))
+ return 1;
return 0;
}
struct auto_pin_cfg *cfg = &spec->autocfg;
/* ignore sensing of shared line and mic jacks */
- if (spec->line_switch &&
- cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_LINE])
+ if (cfg->hp_pins[i] == spec->line_switch)
return 1;
- if (spec->mic_switch &&
- cfg->hp_pins[i] == cfg->input_pins[AUTO_PIN_MIC])
+ if (cfg->hp_pins[i] == spec->mic_switch)
return 1;
/* ignore if the pin is set as line-out */
if (cfg->hp_pins[i] == spec->hp_switch)
return 0;
}
-static void stac92xx_hp_detect(struct hda_codec *codec, unsigned int res)
+static void stac92xx_hp_detect(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
break;
if (no_hp_sensing(spec, i))
continue;
- presence = get_hp_pin_presence(codec, cfg->hp_pins[i]);
+ presence = get_pin_presence(codec, cfg->hp_pins[i]);
+ if (presence) {
+ unsigned int pinctl;
+ pinctl = snd_hda_codec_read(codec, cfg->hp_pins[i], 0,
+ AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+ if (pinctl & AC_PINCTL_IN_EN)
+ presence = 0; /* mic- or line-input */
+ }
}
if (presence) {
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_reset_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data &
~spec->eapd_mask);
for (i = 0; i < cfg->speaker_outs; i++)
stac92xx_set_pinctl(codec, cfg->speaker_pins[i],
AC_PINCTL_OUT_EN);
- if (spec->eapd_mask)
+ if (spec->eapd_mask && spec->eapd_switch)
stac_gpio_set(codec, spec->gpio_mask,
spec->gpio_dir, spec->gpio_data |
spec->eapd_mask);
}
}
-static void stac92xx_pin_sense(struct hda_codec *codec, int idx)
+static void stac_toggle_power_map(struct hda_codec *codec, hda_nid_t nid,
+ int enable)
{
struct sigmatel_spec *spec = codec->spec;
- hda_nid_t nid = spec->pwr_nids[idx];
- int presence, val;
- val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0)
- & 0x000000ff;
- presence = get_hp_pin_presence(codec, nid);
+ unsigned int idx, val;
+
+ for (idx = 0; idx < spec->num_pwrs; idx++) {
+ if (spec->pwr_nids[idx] == nid)
+ break;
+ }
+ if (idx >= spec->num_pwrs)
+ return;
/* several codecs have two power down bits */
if (spec->pwr_mapping)
else
idx = 1 << idx;
- if (presence)
+ val = snd_hda_codec_read(codec, codec->afg, 0, 0x0fec, 0x0) & 0xff;
+ if (enable)
val &= ~idx;
else
val |= idx;
/* power down unused output ports */
snd_hda_codec_write(codec, codec->afg, 0, 0x7ec, val);
-};
+}
+
+static void stac92xx_pin_sense(struct hda_codec *codec, hda_nid_t nid)
+{
+ stac_toggle_power_map(codec, nid, get_pin_presence(codec, nid));
+}
+
+static void stac92xx_report_jack(struct hda_codec *codec, hda_nid_t nid)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ struct sigmatel_jack *jacks = spec->jacks.list;
+
+ if (jacks) {
+ int i;
+ for (i = 0; i < spec->jacks.used; i++) {
+ if (jacks->nid == nid) {
+ unsigned int pin_ctl =
+ snd_hda_codec_read(codec, nid,
+ 0, AC_VERB_GET_PIN_WIDGET_CONTROL,
+ 0x00);
+ int type = jacks->type;
+ if (type == (SND_JACK_LINEOUT
+ | SND_JACK_HEADPHONE))
+ type = (pin_ctl & AC_PINCTL_HP_EN)
+ ? SND_JACK_HEADPHONE : SND_JACK_LINEOUT;
+ snd_jack_report(jacks->jack,
+ get_pin_presence(codec, nid)
+ ? type : 0);
+ }
+ jacks++;
+ }
+ }
+}
+
+static void stac_issue_unsol_event(struct hda_codec *codec, hda_nid_t nid,
+ unsigned char type)
+{
+ struct sigmatel_event *event = stac_get_event(codec, nid, type);
+ if (!event)
+ return;
+ codec->patch_ops.unsol_event(codec, (unsigned)event->tag << 26);
+}
static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res)
{
struct sigmatel_spec *spec = codec->spec;
- int idx = res >> 26 & 0x0f;
+ struct sigmatel_event *event;
+ int tag, data;
+
+ tag = (res >> 26) & 0x7f;
+ event = stac_get_event_from_tag(codec, tag);
+ if (!event)
+ return;
- switch ((res >> 26) & 0x70) {
+ switch (event->type) {
case STAC_HP_EVENT:
- stac92xx_hp_detect(codec, res);
+ stac92xx_hp_detect(codec);
/* fallthru */
+ case STAC_INSERT_EVENT:
case STAC_PWR_EVENT:
if (spec->num_pwrs > 0)
- stac92xx_pin_sense(codec, idx);
+ stac92xx_pin_sense(codec, event->nid);
+ stac92xx_report_jack(codec, event->nid);
break;
- case STAC_VREF_EVENT: {
- int data = snd_hda_codec_read(codec, codec->afg, 0,
- AC_VERB_GET_GPIO_DATA, 0);
+ case STAC_VREF_EVENT:
+ data = snd_hda_codec_read(codec, codec->afg, 0,
+ AC_VERB_GET_GPIO_DATA, 0);
/* toggle VREF state based on GPIOx status */
snd_hda_codec_write(codec, codec->afg, 0, 0x7e0,
- !!(data & (1 << idx)));
+ !!(data & (1 << event->data)));
break;
- }
}
}
+#ifdef CONFIG_PROC_FS
+static void stac92hd_proc_hook(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ if (nid == codec->afg)
+ snd_iprintf(buffer, "Power-Map: 0x%02x\n",
+ snd_hda_codec_read(codec, nid, 0, 0x0fec, 0x0));
+}
+
+static void analog_loop_proc_hook(struct snd_info_buffer *buffer,
+ struct hda_codec *codec,
+ unsigned int verb)
+{
+ snd_iprintf(buffer, "Analog Loopback: 0x%02x\n",
+ snd_hda_codec_read(codec, codec->afg, 0, verb, 0));
+}
+
+/* stac92hd71bxx, stac92hd73xx */
+static void stac92hd7x_proc_hook(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ stac92hd_proc_hook(buffer, codec, nid);
+ if (nid == codec->afg)
+ analog_loop_proc_hook(buffer, codec, 0xfa0);
+}
+
+static void stac9205_proc_hook(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ if (nid == codec->afg)
+ analog_loop_proc_hook(buffer, codec, 0xfe0);
+}
+
+static void stac927x_proc_hook(struct snd_info_buffer *buffer,
+ struct hda_codec *codec, hda_nid_t nid)
+{
+ if (nid == codec->afg)
+ analog_loop_proc_hook(buffer, codec, 0xfeb);
+}
+#else
+#define stac92hd_proc_hook NULL
+#define stac92hd7x_proc_hook NULL
+#define stac9205_proc_hook NULL
+#define stac927x_proc_hook NULL
+#endif
+
#ifdef SND_HDA_NEEDS_RESUME
static int stac92xx_resume(struct hda_codec *codec)
{
struct sigmatel_spec *spec = codec->spec;
stac92xx_set_config_regs(codec);
- snd_hda_sequence_write(codec, spec->init);
- stac_gpio_set(codec, spec->gpio_mask,
- spec->gpio_dir, spec->gpio_data);
+ stac92xx_init(codec);
snd_hda_codec_resume_amp(codec);
snd_hda_codec_resume_cache(codec);
- /* power down inactive DACs */
- if (spec->dac_list)
- stac92xx_power_down(codec);
- /* invoke unsolicited event to reset the HP state */
+ /* fake event to set up pins again to override cached values */
if (spec->hp_detect)
- codec->patch_ops.unsol_event(codec, STAC_HP_EVENT << 26);
+ stac_issue_unsol_event(codec, spec->autocfg.hp_pins[0],
+ STAC_HP_EVENT);
+ return 0;
+}
+
+static int stac92xx_suspend(struct hda_codec *codec, pm_message_t state)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ if (spec->eapd_mask)
+ stac_gpio_set(codec, spec->gpio_mask,
+ spec->gpio_dir, spec->gpio_data &
+ ~spec->eapd_mask);
return 0;
}
#endif
.free = stac92xx_free,
.unsol_event = stac92xx_unsol_event,
#ifdef SND_HDA_NEEDS_RESUME
+ .suspend = stac92xx_suspend,
.resume = stac92xx_resume,
#endif
};
if (spec->board_config < 0) {
snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9200, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac9200_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac9200_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
spec->multiout.max_channels = 2;
snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
"using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else if (stac925x_brd_tbl[spec->board_config] != NULL){
- spec->pin_configs = stac925x_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac925x_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
spec->multiout.max_channels = 2;
struct sigmatel_spec *spec;
hda_nid_t conn[STAC92HD73_DAC_COUNT + 2];
int err = 0;
+ int num_dacs;
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (spec == NULL)
snd_printdd(KERN_INFO "hda_codec: Unknown model for"
" STAC92HD73XX, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac92hd73xx_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac92hd73xx_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
- spec->multiout.num_dacs = snd_hda_get_connections(codec, 0x0a,
+ num_dacs = snd_hda_get_connections(codec, 0x0a,
conn, STAC92HD73_DAC_COUNT + 2) - 1;
- if (spec->multiout.num_dacs < 0) {
+ if (num_dacs < 3 || num_dacs > 5) {
printk(KERN_WARNING "hda_codec: Could not determine "
"number of channels defaulting to DAC count\n");
- spec->multiout.num_dacs = STAC92HD73_DAC_COUNT;
+ num_dacs = STAC92HD73_DAC_COUNT;
}
-
- switch (spec->multiout.num_dacs) {
+ switch (num_dacs) {
case 0x3: /* 6 Channel */
spec->mixer = stac92hd73xx_6ch_mixer;
spec->init = stac92hd73xx_6ch_core_init;
case 0x5: /* 10 Channel */
spec->mixer = stac92hd73xx_10ch_mixer;
spec->init = stac92hd73xx_10ch_core_init;
- };
+ }
+ spec->multiout.dac_nids = spec->dac_nids;
- spec->multiout.dac_nids = stac92hd73xx_dac_nids;
spec->aloopback_mask = 0x01;
spec->aloopback_shift = 8;
case STAC_DELL_EQ:
spec->init = dell_eq_core_init;
/* fallthru */
- case STAC_DELL_M6:
+ case STAC_DELL_M6_AMIC:
+ case STAC_DELL_M6_DMIC:
+ case STAC_DELL_M6_BOTH:
spec->num_smuxes = 0;
spec->mixer = &stac92hd73xx_6ch_mixer[DELL_M6_MIXER];
spec->amp_nids = &stac92hd73xx_amp_nids[DELL_M6_AMP];
+ spec->eapd_switch = 0;
spec->num_amps = 1;
- if (!spec->init)
+ if (spec->board_config != STAC_DELL_EQ)
spec->init = dell_m6_core_init;
- switch (codec->subsystem_id) {
- case 0x1028025e: /* Analog Mics */
- case 0x1028025f:
+ switch (spec->board_config) {
+ case STAC_DELL_M6_AMIC: /* Analog Mics */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
spec->num_dmics = 0;
spec->private_dimux.num_items = 1;
break;
- case 0x10280271: /* Digital Mics */
- case 0x10280272:
- case 0x10280254:
- case 0x10280255:
+ case STAC_DELL_M6_DMIC: /* Digital Mics */
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
spec->private_dimux.num_items = 2;
break;
- case 0x10280256: /* Both */
- case 0x10280057:
+ case STAC_DELL_M6_BOTH: /* Both */
stac92xx_set_config_reg(codec, 0x0b, 0x90A70170);
stac92xx_set_config_reg(codec, 0x13, 0x90A60160);
spec->num_dmics = 1;
default:
spec->num_dmics = STAC92HD73XX_NUM_DMICS;
spec->num_smuxes = ARRAY_SIZE(stac92hd73xx_smux_nids);
+ spec->eapd_switch = 1;
}
if (spec->board_config > STAC_92HD73XX_REF) {
/* GPIO0 High = Enable EAPD */
return err;
}
+ if (spec->board_config == STAC_92HD73XX_NO_JD)
+ spec->hp_detect = 0;
+
codec->patch_ops = stac92xx_patch_ops;
+ codec->proc_widget_hook = stac92hd7x_proc_hook;
+
return 0;
}
spec->pwr_nids = stac92hd83xxx_pwr_nids;
spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
- spec->multiout.dac_nids = stac92hd83xxx_dac_nids;
+ spec->multiout.dac_nids = spec->dac_nids;
spec->init = stac92hd83xxx_core_init;
switch (codec->vendor_id) {
case 0x111d7605:
- spec->multiout.num_dacs = STAC92HD81_DAC_COUNT;
break;
default:
spec->num_pwrs--;
spec->init++; /* switch to config #2 */
- spec->multiout.num_dacs = STAC92HD83_DAC_COUNT;
}
spec->mixer = stac92hd83xxx_mixer;
snd_printdd(KERN_INFO "hda_codec: Unknown model for"
" STAC92HD83XXX, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac92hd83xxx_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac92hd83xxx_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
err = stac92xx_parse_auto_config(codec, 0x1d, 0);
codec->patch_ops = stac92xx_patch_ops;
- return 0;
-}
+ codec->proc_widget_hook = stac92hd_proc_hook;
-#ifdef SND_HDA_NEEDS_RESUME
-static void stac92hd71xx_set_power_state(struct hda_codec *codec, int pwr)
-{
- struct sigmatel_spec *spec = codec->spec;
- int i;
- snd_hda_codec_write_cache(codec, codec->afg, 0,
- AC_VERB_SET_POWER_STATE, pwr);
-
- msleep(1);
- for (i = 0; i < spec->num_adcs; i++) {
- snd_hda_codec_write_cache(codec,
- spec->adc_nids[i], 0,
- AC_VERB_SET_POWER_STATE, pwr);
- }
-};
-
-static int stac92hd71xx_resume(struct hda_codec *codec)
-{
- stac92hd71xx_set_power_state(codec, AC_PWRST_D0);
- return stac92xx_resume(codec);
-}
-
-static int stac92hd71xx_suspend(struct hda_codec *codec, pm_message_t state)
-{
- stac92hd71xx_set_power_state(codec, AC_PWRST_D3);
return 0;
-};
-
-#endif
-
-static struct hda_codec_ops stac92hd71bxx_patch_ops = {
- .build_controls = stac92xx_build_controls,
- .build_pcms = stac92xx_build_pcms,
- .init = stac92xx_init,
- .free = stac92xx_free,
- .unsol_event = stac92xx_unsol_event,
-#ifdef SND_HDA_NEEDS_RESUME
- .resume = stac92hd71xx_resume,
- .suspend = stac92hd71xx_suspend,
-#endif
-};
+}
static struct hda_input_mux stac92hd71bxx_dmux = {
.num_items = 4,
snd_printdd(KERN_INFO "hda_codec: Unknown model for"
" STAC92HD71BXX, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac92hd71bxx_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac92hd71bxx_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
if (spec->board_config > STAC_92HD71BXX_REF) {
switch (spec->board_config) {
case STAC_HP_M4:
/* Enable VREF power saving on GPIO1 detect */
+ err = stac_add_event(spec, codec->afg,
+ STAC_VREF_EVENT, 0x02);
+ if (err < 0)
+ return err;
snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x02);
snd_hda_codec_write_cache(codec, codec->afg, 0,
- AC_VERB_SET_UNSOLICITED_ENABLE,
- (AC_USRSP_EN | STAC_VREF_EVENT | 0x01));
+ AC_VERB_SET_UNSOLICITED_ENABLE,
+ AC_USRSP_EN | err);
spec->gpio_mask |= 0x02;
break;
}
if ((codec->revision_id & 0xf) == 0 ||
- (codec->revision_id & 0xf) == 1) {
-#ifdef SND_HDA_NEEDS_RESUME
- codec->patch_ops = stac92hd71bxx_patch_ops;
-#endif
+ (codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- }
/* no output amps */
spec->num_pwrs = 0;
/* disable VSW */
spec->init = &stac92hd71bxx_analog_core_init[HD_DISABLE_PORTF];
- stac92xx_set_config_reg(codec, 0xf, 0x40f000f0);
+ stac_change_pin_config(codec, 0xf, 0x40f000f0);
break;
case 0x111d7603: /* 6 Port with Analog Mixer */
- if ((codec->revision_id & 0xf) == 1) {
-#ifdef SND_HDA_NEEDS_RESUME
- codec->patch_ops = stac92hd71bxx_patch_ops;
-#endif
+ if ((codec->revision_id & 0xf) == 1)
spec->stream_delay = 40; /* 40 milliseconds */
- }
/* no output amps */
spec->num_pwrs = 0;
switch (spec->board_config) {
case STAC_HP_M4:
- spec->num_dmics = 0;
- spec->num_smuxes = 0;
- spec->num_dmuxes = 0;
-
/* enable internal microphone */
- stac92xx_set_config_reg(codec, 0x0e, 0x01813040);
+ stac_change_pin_config(codec, 0x0e, 0x01813040);
stac92xx_auto_set_pinctl(codec, 0x0e,
AC_PINCTL_IN_EN | AC_PINCTL_VREF_80);
+ /* fallthru */
+ case STAC_DELL_M4_2:
+ spec->num_dmics = 0;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
+ break;
+ case STAC_DELL_M4_1:
+ case STAC_DELL_M4_3:
+ spec->num_dmics = 1;
+ spec->num_smuxes = 0;
+ spec->num_dmuxes = 0;
break;
default:
spec->num_dmics = STAC92HD71BXX_NUM_DMICS;
spec->num_dmuxes = ARRAY_SIZE(stac92hd71bxx_dmux_nids);
};
- spec->multiout.num_dacs = 1;
- spec->multiout.hp_nid = 0x11;
- spec->multiout.dac_nids = stac92hd71bxx_dac_nids;
+ spec->multiout.dac_nids = spec->dac_nids;
if (spec->dinput_mux)
spec->private_dimux.num_items +=
spec->num_dmics -
return err;
}
+ codec->proc_widget_hook = stac92hd7x_proc_hook;
+
return 0;
};
snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC922x, "
"using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else if (stac922x_brd_tbl[spec->board_config] != NULL) {
- spec->pin_configs = stac922x_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac922x_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
spec->adc_nids = stac922x_adc_nids;
snd_printdd(KERN_INFO "hda_codec: Unknown model for"
"STAC927x, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac927x_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac927x_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
spec->digbeep_nid = 0x23;
case 0x10280209:
case 0x1028022e:
/* correct the device field to SPDIF out */
- stac92xx_set_config_reg(codec, 0x21, 0x01442070);
+ stac_change_pin_config(codec, 0x21, 0x01442070);
break;
};
/* configure the analog microphone on some laptops */
- stac92xx_set_config_reg(codec, 0x0c, 0x90a79130);
+ stac_change_pin_config(codec, 0x0c, 0x90a79130);
/* correct the front output jack as a hp out */
- stac92xx_set_config_reg(codec, 0x0f, 0x0227011f);
+ stac_change_pin_config(codec, 0x0f, 0x0227011f);
/* correct the front input jack as a mic */
- stac92xx_set_config_reg(codec, 0x0e, 0x02a79130);
+ stac_change_pin_config(codec, 0x0e, 0x02a79130);
/* fallthru */
case STAC_DELL_3ST:
/* GPIO2 High = Enable EAPD */
spec->num_pwrs = 0;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
err = stac92xx_parse_auto_config(codec, 0x1e, 0x20);
if (!err) {
codec->patch_ops = stac92xx_patch_ops;
+ codec->proc_widget_hook = stac927x_proc_hook;
+
/*
* !!FIXME!!
* The STAC927x seem to require fairly long delays for certain
*/
codec->bus->needs_damn_long_delay = 1;
+ /* no jack detecion for ref-no-jd model */
+ if (spec->board_config == STAC_D965_REF_NO_JD)
+ spec->hp_detect = 0;
+
return 0;
}
if (spec->board_config < 0) {
snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC9205, using BIOS defaults\n");
err = stac92xx_save_bios_config_regs(codec);
- if (err < 0) {
- stac92xx_free(codec);
- return err;
- }
- spec->pin_configs = spec->bios_pin_configs;
- } else {
- spec->pin_configs = stac9205_brd_tbl[spec->board_config];
- stac92xx_set_config_regs(codec);
+ } else
+ err = stac_save_pin_cfgs(codec,
+ stac9205_brd_tbl[spec->board_config]);
+ if (err < 0) {
+ stac92xx_free(codec);
+ return err;
}
spec->digbeep_nid = 0x23;
spec->aloopback_mask = 0x40;
spec->aloopback_shift = 0;
+ spec->eapd_switch = 1;
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config){
case STAC_9205_DELL_M43:
/* Enable SPDIF in/out */
- stac92xx_set_config_reg(codec, 0x1f, 0x01441030);
- stac92xx_set_config_reg(codec, 0x20, 0x1c410030);
+ stac_change_pin_config(codec, 0x1f, 0x01441030);
+ stac_change_pin_config(codec, 0x20, 0x1c410030);
/* Enable unsol response for GPIO4/Dock HP connection */
+ err = stac_add_event(spec, codec->afg, STAC_VREF_EVENT, 0x01);
+ if (err < 0)
+ return err;
snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK, 0x10);
snd_hda_codec_write_cache(codec, codec->afg, 0,
AC_VERB_SET_UNSOLICITED_ENABLE,
- (AC_USRSP_EN | STAC_HP_EVENT));
+ AC_USRSP_EN | err);
spec->gpio_dir = 0x0b;
spec->eapd_mask = 0x01;
codec->patch_ops = stac92xx_patch_ops;
+ codec->proc_widget_hook = stac9205_proc_hook;
+
return 0;
}
{}
};
-/* bind volumes of both NID 0x02 and 0x05 */
-static struct hda_bind_ctls vaio_bind_master_vol = {
- .ops = &snd_hda_bind_vol,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x05, 3, 0, HDA_OUTPUT),
- 0
- },
-};
-
-/* bind volumes of both NID 0x02 and 0x05 */
-static struct hda_bind_ctls vaio_bind_master_sw = {
- .ops = &snd_hda_bind_sw,
- .values = {
- HDA_COMPOSE_AMP_VAL(0x02, 3, 0, HDA_OUTPUT),
- HDA_COMPOSE_AMP_VAL(0x05, 3, 0, HDA_OUTPUT),
- 0,
- },
-};
-
static struct snd_kcontrol_new vaio_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &vaio_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &vaio_bind_master_sw),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT),
/* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
};
static struct snd_kcontrol_new vaio_ar_mixer[] = {
- HDA_BIND_VOL("Master Playback Volume", &vaio_bind_master_vol),
- HDA_BIND_SW("Master Playback Switch", &vaio_bind_master_sw),
+ HDA_CODEC_VOLUME("Headphone Playback Volume", 0x02, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x02, 0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Speaker Playback Volume", 0x05, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Speaker Playback Switch", 0x05, 0, HDA_OUTPUT),
/* HDA_CODEC_VOLUME("CD Capture Volume", 0x07, 0, HDA_INPUT), */
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_INPUT),
static void stac9872_vaio_hp_detect(struct hda_codec *codec, unsigned int res)
{
- if (get_hp_pin_presence(codec, 0x0a)) {
+ if (get_pin_presence(codec, 0x0a)) {
stac92xx_reset_pinctl(codec, 0x0f, AC_PINCTL_OUT_EN);
stac92xx_set_pinctl(codec, 0x0a, AC_PINCTL_OUT_EN);
} else {
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_sigmatel[] = {
+static struct hda_codec_preset snd_hda_preset_sigmatel[] = {
{ .id = 0x83847690, .name = "STAC9200", .patch = patch_stac9200 },
{ .id = 0x83847882, .name = "STAC9220 A1", .patch = patch_stac922x },
{ .id = 0x83847680, .name = "STAC9221 A1", .patch = patch_stac922x },
{ .id = 0x111d76b7, .name = "92HD71B5X", .patch = patch_stac92hd71bxx },
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:8384*");
+MODULE_ALIAS("snd-hda-codec-id:111d*");
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("IDT/Sigmatel HD-audio codec");
+
+static struct hda_codec_preset_list sigmatel_list = {
+ .preset = snd_hda_preset_sigmatel,
+ .owner = THIS_MODULE,
+};
+
+static int __init patch_sigmatel_init(void)
+{
+ return snd_hda_add_codec_preset(&sigmatel_list);
+}
+
+static void __exit patch_sigmatel_exit(void)
+{
+ snd_hda_delete_codec_preset(&sigmatel_list);
+}
+
+module_init(patch_sigmatel_init)
+module_exit(patch_sigmatel_exit)
#include <sound/asoundef.h>
#include "hda_codec.h"
#include "hda_local.h"
-#include "hda_patch.h"
/* amp values */
#define AMP_VAL_IDX_SHIFT 19
#define AMP_VAL_IDX_MASK (0x0f<<19)
-#define NUM_CONTROL_ALLOC 32
-#define NUM_VERB_ALLOC 32
-
/* Pin Widget NID */
#define VT1708_HP_NID 0x13
#define VT1708_DIGOUT_NID 0x14
AUTO_SEQ_SIDE
};
-#define get_amp_nid(kc) ((kc)->private_value & 0xffff)
-
/* Some VT1708S based boards gets the micboost setting wrong, so we have
* to apply some brute-force and re-write the TLV's by software. */
static int mic_boost_tlv(struct snd_kcontrol *kcontrol, int op_flag,
/* dynamic controls, init_verbs and input_mux */
struct auto_pin_cfg autocfg;
- unsigned int num_kctl_alloc, num_kctl_used;
- struct snd_kcontrol_new *kctl_alloc;
+ struct snd_array kctls;
struct hda_input_mux private_imux[2];
hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS];
{
struct snd_kcontrol_new *knew;
- if (spec->num_kctl_used >= spec->num_kctl_alloc) {
- int num = spec->num_kctl_alloc + NUM_CONTROL_ALLOC;
-
- /* array + terminator */
- knew = kcalloc(num + 1, sizeof(*knew), GFP_KERNEL);
- if (!knew)
- return -ENOMEM;
- if (spec->kctl_alloc) {
- memcpy(knew, spec->kctl_alloc,
- sizeof(*knew) * spec->num_kctl_alloc);
- kfree(spec->kctl_alloc);
- }
- spec->kctl_alloc = knew;
- spec->num_kctl_alloc = num;
- }
-
- knew = &spec->kctl_alloc[spec->num_kctl_used];
+ snd_array_init(&spec->kctls, sizeof(*knew), 32);
+ knew = snd_array_new(&spec->kctls);
+ if (!knew)
+ return -ENOMEM;
*knew = vt1708_control_templates[type];
knew->name = kstrdup(name, GFP_KERNEL);
-
if (!knew->name)
return -ENOMEM;
knew->private_value = val;
- spec->num_kctl_used++;
return 0;
}
+static void via_free_kctls(struct hda_codec *codec)
+{
+ struct via_spec *spec = codec->spec;
+
+ if (spec->kctls.list) {
+ struct snd_kcontrol_new *kctl = spec->kctls.list;
+ int i;
+ for (i = 0; i < spec->kctls.used; i++)
+ kfree(kctl[i].name);
+ }
+ snd_array_free(&spec->kctls);
+}
+
/* create input playback/capture controls for the given pin */
static int via_new_analog_input(struct via_spec *spec, hda_nid_t pin,
const char *ctlname, int idx, int mix_nid)
if (err < 0)
return err;
}
+ via_free_kctls(codec); /* no longer needed */
return 0;
}
static void via_free(struct hda_codec *codec)
{
struct via_spec *spec = codec->spec;
- unsigned int i;
if (!spec)
return;
- if (spec->kctl_alloc) {
- for (i = 0; i < spec->num_kctl_used; i++)
- kfree(spec->kctl_alloc[i].name);
- kfree(spec->kctl_alloc);
- }
-
+ via_free_kctls(codec);
kfree(codec->spec);
}
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708_DIGIN_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->init_verbs[spec->num_iverbs++] = vt1708_volume_init_verbs;
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1709_DIGIN_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux[0];
if (spec->autocfg.dig_in_pin)
spec->dig_in_nid = VT1708B_DIGIN_NID;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux[0];
spec->extra_dig_out_nid = 0x15;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux[0];
spec->extra_dig_out_nid = 0x1B;
- if (spec->kctl_alloc)
- spec->mixers[spec->num_mixers++] = spec->kctl_alloc;
+ if (spec->kctls.list)
+ spec->mixers[spec->num_mixers++] = spec->kctls.list;
spec->input_mux = &spec->private_imux[0];
/*
* patch entries
*/
-struct hda_codec_preset snd_hda_preset_via[] = {
- { .id = 0x11061708, .name = "VIA VT1708", .patch = patch_vt1708},
- { .id = 0x11061709, .name = "VIA VT1708", .patch = patch_vt1708},
- { .id = 0x1106170A, .name = "VIA VT1708", .patch = patch_vt1708},
- { .id = 0x1106170B, .name = "VIA VT1708", .patch = patch_vt1708},
- { .id = 0x1106E710, .name = "VIA VT1709 10-Ch",
+static struct hda_codec_preset snd_hda_preset_via[] = {
+ { .id = 0x11061708, .name = "VT1708", .patch = patch_vt1708},
+ { .id = 0x11061709, .name = "VT1708", .patch = patch_vt1708},
+ { .id = 0x1106170a, .name = "VT1708", .patch = patch_vt1708},
+ { .id = 0x1106170b, .name = "VT1708", .patch = patch_vt1708},
+ { .id = 0x1106e710, .name = "VT1709 10-Ch",
.patch = patch_vt1709_10ch},
- { .id = 0x1106E711, .name = "VIA VT1709 10-Ch",
+ { .id = 0x1106e711, .name = "VT1709 10-Ch",
.patch = patch_vt1709_10ch},
- { .id = 0x1106E712, .name = "VIA VT1709 10-Ch",
+ { .id = 0x1106e712, .name = "VT1709 10-Ch",
.patch = patch_vt1709_10ch},
- { .id = 0x1106E713, .name = "VIA VT1709 10-Ch",
+ { .id = 0x1106e713, .name = "VT1709 10-Ch",
.patch = patch_vt1709_10ch},
- { .id = 0x1106E714, .name = "VIA VT1709 6-Ch",
+ { .id = 0x1106e714, .name = "VT1709 6-Ch",
.patch = patch_vt1709_6ch},
- { .id = 0x1106E715, .name = "VIA VT1709 6-Ch",
+ { .id = 0x1106e715, .name = "VT1709 6-Ch",
.patch = patch_vt1709_6ch},
- { .id = 0x1106E716, .name = "VIA VT1709 6-Ch",
+ { .id = 0x1106e716, .name = "VT1709 6-Ch",
.patch = patch_vt1709_6ch},
- { .id = 0x1106E717, .name = "VIA VT1709 6-Ch",
+ { .id = 0x1106e717, .name = "VT1709 6-Ch",
.patch = patch_vt1709_6ch},
- { .id = 0x1106E720, .name = "VIA VT1708B 8-Ch",
+ { .id = 0x1106e720, .name = "VT1708B 8-Ch",
.patch = patch_vt1708B_8ch},
- { .id = 0x1106E721, .name = "VIA VT1708B 8-Ch",
+ { .id = 0x1106e721, .name = "VT1708B 8-Ch",
.patch = patch_vt1708B_8ch},
- { .id = 0x1106E722, .name = "VIA VT1708B 8-Ch",
+ { .id = 0x1106e722, .name = "VT1708B 8-Ch",
.patch = patch_vt1708B_8ch},
- { .id = 0x1106E723, .name = "VIA VT1708B 8-Ch",
+ { .id = 0x1106e723, .name = "VT1708B 8-Ch",
.patch = patch_vt1708B_8ch},
- { .id = 0x1106E724, .name = "VIA VT1708B 4-Ch",
+ { .id = 0x1106e724, .name = "VT1708B 4-Ch",
.patch = patch_vt1708B_4ch},
- { .id = 0x1106E725, .name = "VIA VT1708B 4-Ch",
+ { .id = 0x1106e725, .name = "VT1708B 4-Ch",
.patch = patch_vt1708B_4ch},
- { .id = 0x1106E726, .name = "VIA VT1708B 4-Ch",
+ { .id = 0x1106e726, .name = "VT1708B 4-Ch",
.patch = patch_vt1708B_4ch},
- { .id = 0x1106E727, .name = "VIA VT1708B 4-Ch",
+ { .id = 0x1106e727, .name = "VT1708B 4-Ch",
.patch = patch_vt1708B_4ch},
- { .id = 0x11060397, .name = "VIA VT1708S",
+ { .id = 0x11060397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11061397, .name = "VIA VT1708S",
+ { .id = 0x11061397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11062397, .name = "VIA VT1708S",
+ { .id = 0x11062397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11063397, .name = "VIA VT1708S",
+ { .id = 0x11063397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11064397, .name = "VIA VT1708S",
+ { .id = 0x11064397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11065397, .name = "VIA VT1708S",
+ { .id = 0x11065397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11066397, .name = "VIA VT1708S",
+ { .id = 0x11066397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11067397, .name = "VIA VT1708S",
+ { .id = 0x11067397, .name = "VT1708S",
.patch = patch_vt1708S},
- { .id = 0x11060398, .name = "VIA VT1702",
+ { .id = 0x11060398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11061398, .name = "VIA VT1702",
+ { .id = 0x11061398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11062398, .name = "VIA VT1702",
+ { .id = 0x11062398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11063398, .name = "VIA VT1702",
+ { .id = 0x11063398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11064398, .name = "VIA VT1702",
+ { .id = 0x11064398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11065398, .name = "VIA VT1702",
+ { .id = 0x11065398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11066398, .name = "VIA VT1702",
+ { .id = 0x11066398, .name = "VT1702",
.patch = patch_vt1702},
- { .id = 0x11067398, .name = "VIA VT1702",
+ { .id = 0x11067398, .name = "VT1702",
.patch = patch_vt1702},
{} /* terminator */
};
+
+MODULE_ALIAS("snd-hda-codec-id:1106*");
+
+static struct hda_codec_preset_list via_list = {
+ .preset = snd_hda_preset_via,
+ .owner = THIS_MODULE,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VIA HD-audio codec");
+
+static int __init patch_via_init(void)
+{
+ return snd_hda_add_codec_preset(&via_list);
+}
+
+static void __exit patch_via_exit(void)
+{
+ snd_hda_delete_codec_preset(&via_list);
+}
+
+module_init(patch_via_init)
+module_exit(patch_via_exit)
unsigned char status_mask =
VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX | VT1724_IRQ_MTPCM;
int handled = 0;
-#ifdef CONFIG_SND_DEBUG
int timeout = 0;
-#endif
while (1) {
status = inb(ICEREG1724(ice, IRQSTAT));
status &= status_mask;
if (status == 0)
break;
-#ifdef CONFIG_SND_DEBUG
if (++timeout > 10) {
- printk(KERN_ERR
- "ice1724: Too long irq loop, status = 0x%x\n",
- status);
+ status = inb(ICEREG1724(ice, IRQSTAT));
+ printk(KERN_ERR "ice1724: Too long irq loop, "
+ "status = 0x%x\n", status);
+ if (status & VT1724_IRQ_MPU_TX) {
+ printk(KERN_ERR "ice1724: Disabling MPU_TX\n");
+ outb(inb(ICEREG1724(ice, IRQMASK)) |
+ VT1724_IRQ_MPU_TX,
+ ICEREG1724(ice, IRQMASK));
+ }
break;
}
-#endif
handled = 1;
if (status & VT1724_IRQ_MPU_TX) {
spin_lock(&ice->reg_lock);
{
struct snd_ice1712 *ice;
int err;
- unsigned char mask;
static struct snd_device_ops ops = {
.dev_free = snd_vt1724_dev_free,
};
return -EIO;
}
- /* unmask used interrupts */
- mask = VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX;
- outb(mask, ICEREG1724(ice, IRQMASK));
+ /* MPU_RX and TX irq masks are cleared later dynamically */
+ outb(VT1724_IRQ_MPU_RX | VT1724_IRQ_MPU_TX , ICEREG1724(ice, IRQMASK));
+
/* don't handle FIFO overrun/underruns (just yet),
* since they cause machine lockups
*/
return IRQ_NONE;
if (status & HV_INT_PENDING)
- tasklet_hi_schedule(&chip->hwvol_tq);
+ tasklet_schedule(&chip->hwvol_tq);
/*
* ack an assp int if its running
.dev_free = snd_mixart_chip_dev_free,
};
- mgr->chip[idx] = chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (! chip) {
snd_printk(KERN_ERR "cannot allocate chip\n");
return -ENOMEM;
return err;
}
+ mgr->chip[idx] = chip;
snd_card_set_dev(card, &mgr->pci->dev);
return 0;
sprintf(card->longname, "%s [PCM #%d]", mgr->longname, i);
if ((err = snd_mixart_create(mgr, card, i)) < 0) {
+ snd_card_free(card);
snd_mixart_free(mgr);
return err;
}
mgr->msg_fifo[mgr->msg_fifo_writeptr] = msg;
mgr->msg_fifo_writeptr++;
mgr->msg_fifo_writeptr %= MSG_FIFO_SIZE;
- tasklet_hi_schedule(&mgr->msg_taskq);
+ tasklet_schedule(&mgr->msg_taskq);
}
spin_unlock(&mgr->msg_lock);
break;
enum {
MODEL_CMEDIA_REF, /* C-Media's reference design */
MODEL_MERIDIAN, /* AuzenTech X-Meridian */
+ MODEL_HALO, /* HT-Omega Claro halo */
};
static struct pci_device_id oxygen_ids[] __devinitdata = {
{ OXYGEN_PCI_SUBID(0x1a58, 0x0910), .driver_data = MODEL_CMEDIA_REF },
{ OXYGEN_PCI_SUBID(0x415a, 0x5431), .driver_data = MODEL_MERIDIAN },
{ OXYGEN_PCI_SUBID(0x7284, 0x9761), .driver_data = MODEL_CMEDIA_REF },
+ { OXYGEN_PCI_SUBID(0x7284, 0x9781), .driver_data = MODEL_HALO },
{ }
};
MODULE_DEVICE_TABLE(pci, oxygen_ids);
PLAYBACK_1_TO_SPDIF |
CAPTURE_0_FROM_I2S_2 |
CAPTURE_1_FROM_SPDIF;
+ }
+ if (driver_data == MODEL_MERIDIAN || driver_data == MODEL_HALO) {
chip->model.misc_flags = OXYGEN_MISC_MIDI;
chip->model.device_config |= MIDI_OUTPUT | MIDI_INPUT;
}
PCXHR_STREAM_STATUS_SCHEDULE_RUN;
snd_pcm_trigger_done(s, subs);
}
- tasklet_hi_schedule(&chip->mgr->trigger_taskq);
+ tasklet_schedule(&chip->mgr->trigger_taskq);
} else {
stream = subs->runtime->private_data;
snd_printdd("Only one Substream %c %d\n",
.dev_free = pcxhr_chip_dev_free,
};
- mgr->chip[idx] = chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (! chip) {
snd_printk(KERN_ERR "cannot allocate chip\n");
return -ENOMEM;
return err;
}
+ mgr->chip[idx] = chip;
snd_card_set_dev(card, &mgr->pci->dev);
return 0;
sprintf(card->longname, "%s [PCM #%d]", mgr->longname, i);
if ((err = pcxhr_create(mgr, card, i)) < 0) {
+ snd_card_free(card);
pcxhr_free(mgr);
return err;
}
mgr->dsp_time_last = PCXHR_DSP_TIME_INVALID;
}
mgr->src_it_dsp = reg;
- tasklet_hi_schedule(&mgr->msg_taskq);
+ tasklet_schedule(&mgr->msg_taskq);
}
#ifdef CONFIG_SND_DEBUG_VERBOSE
if (reg & PCXHR_FATAL_DSP_ERR)
#define MAX_WRITE_RETRY 10 /* cmd interface limits */
#define MAX_ERROR_COUNT 10
-#define CMDIF_TIMEOUT 500000
+#define CMDIF_TIMEOUT 50000
#define RESET_TRIES 5
#define READ_PORT_ULONG(p) inl((unsigned long)&(p))
if (IS_EOBIRQ(cif->hwport) || IS_EOSIRQ(cif->hwport) ||
IS_EOCIRQ(cif->hwport)) {
chip->handled_irqs++;
- tasklet_hi_schedule(&chip->riptide_tq);
+ tasklet_schedule(&chip->riptide_tq);
}
if (chip->rmidi && IS_MPUIRQ(cif->hwport)) {
chip->handled_irqs++;
}
}
if (hdsp->use_midi_tasklet && schedule)
- tasklet_hi_schedule(&hdsp->midi_tasklet);
+ tasklet_schedule(&hdsp->midi_tasklet);
return IRQ_HANDLED;
}
schedule = 1;
}
if (schedule)
- tasklet_hi_schedule(&hdspm->midi_tasklet);
+ tasklet_schedule(&hdspm->midi_tasklet);
return IRQ_HANDLED;
}
if (stat & PDAUDIOCF_IRQOVR) /* should never happen */
snd_printk(KERN_ERR "PDAUDIOCF SRAM buffer overrun detected!\n");
if (chip->pcm_substream)
- tasklet_hi_schedule(&chip->tq);
+ tasklet_schedule(&chip->tq);
if (!(stat & PDAUDIOCF_IRQAKM))
stat |= PDAUDIOCF_IRQAKM; /* check rate */
}
}
if (of_device_is_compatible(sound, "tumbler")) {
chip->model = PMAC_TUMBLER;
- chip->can_capture = 0; /* no capture */
+ chip->can_capture = machine_is_compatible("PowerMac4,2");
chip->can_duplex = 0;
// chip->can_byte_swap = 0; /* FIXME: check this */
chip->num_freqs = ARRAY_SIZE(tumbler_freqs);
.put = tumbler_put_master_switch
},
DEFINE_SNAPPER_MIX("PCM Playback Volume", 0, VOL_IDX_PCM),
- DEFINE_SNAPPER_MIX("PCM Playback Volume", 1, VOL_IDX_PCM2),
+ /* Alternative PCM is assigned to Mic analog loopback on iBook G4 */
+ DEFINE_SNAPPER_MIX("Mic Playback Volume", 0, VOL_IDX_PCM2),
DEFINE_SNAPPER_MIX("Monitor Mix Volume", 0, VOL_IDX_ADC),
DEFINE_SNAPPER_MONO("Tone Control - Bass", bass),
DEFINE_SNAPPER_MONO("Tone Control - Treble", treble),
config SND_SOC_AC97_BUS
bool
-# All the supported Soc's
-source "sound/soc/at32/Kconfig"
-source "sound/soc/at91/Kconfig"
+# All the supported SoCs
+source "sound/soc/atmel/Kconfig"
source "sound/soc/au1x/Kconfig"
+source "sound/soc/blackfin/Kconfig"
+source "sound/soc/davinci/Kconfig"
+source "sound/soc/fsl/Kconfig"
+source "sound/soc/omap/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/s3c24xx/Kconfig"
source "sound/soc/sh/Kconfig"
-source "sound/soc/fsl/Kconfig"
-source "sound/soc/davinci/Kconfig"
-source "sound/soc/omap/Kconfig"
-source "sound/soc/blackfin/Kconfig"
# Supported codecs
source "sound/soc/codecs/Kconfig"
snd-soc-core-objs := soc-core.o soc-dapm.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
-obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/
-obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/
+obj-$(CONFIG_SND_SOC) += codecs/
+obj-$(CONFIG_SND_SOC) += atmel/
+obj-$(CONFIG_SND_SOC) += au1x/
+obj-$(CONFIG_SND_SOC) += blackfin/
+obj-$(CONFIG_SND_SOC) += davinci/
+obj-$(CONFIG_SND_SOC) += fsl/
+obj-$(CONFIG_SND_SOC) += omap/
+obj-$(CONFIG_SND_SOC) += pxa/
+obj-$(CONFIG_SND_SOC) += s3c24xx/
+obj-$(CONFIG_SND_SOC) += sh/
+++ /dev/null
-config SND_AT32_SOC
- tristate "SoC Audio for the Atmel AT32 System-on-a-Chip"
- depends on AVR32 && SND_SOC
- help
- Say Y or M if you want to add support for codecs attached to
- the AT32 SSC interface. You will also need to
- to select the audio interfaces to support below.
-
-
-config SND_AT32_SOC_SSC
- tristate
-
-
-
-config SND_AT32_SOC_PLAYPAQ
- tristate "SoC Audio support for PlayPaq with WM8510"
- depends on SND_AT32_SOC && BOARD_PLAYPAQ
- select SND_AT32_SOC_SSC
- select SND_SOC_WM8510
- help
- Say Y or M here if you want to add support for SoC audio
- on the LRS PlayPaq.
-
-
-
-config SND_AT32_SOC_PLAYPAQ_SLAVE
- bool "Run CODEC on PlayPaq in slave mode"
- depends on SND_AT32_SOC_PLAYPAQ
- default n
- help
- Say Y if you want to run with the AT32 SSC generating the BCLK
- and FRAME signals on the PlayPaq. Unless you want to play
- with the AT32 as the SSC master, you probably want to say N here,
- as this will give you better sound quality.
+++ /dev/null
-# AT32 Platform Support
-snd-soc-at32-objs := at32-pcm.o
-snd-soc-at32-ssc-objs := at32-ssc.o
-
-obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o
-obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o
-
-# AT32 Machine Support
-snd-soc-playpaq-objs := playpaq_wm8510.o
-
-obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
+++ /dev/null
-/* sound/soc/at32/at32-pcm.c
- * ASoC PCM interface for Atmel AT32 SoC
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note that this is basically a port of the sound/soc/at91-pcm.c to
- * the AVR32 kernel. Thanks to Frank Mandarino for that code.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/atmel_pdc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include "at32-pcm.h"
-
-
-
-/*--------------------------------------------------------------------------*\
- * Hardware definition
-\*--------------------------------------------------------------------------*/
-/* TODO: These values were taken from the AT91 platform driver, check
- * them against real values for AT32
- */
-static const struct snd_pcm_hardware at32_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_PAUSE),
-
- .formats = SNDRV_PCM_FMTBIT_S16,
- .period_bytes_min = 32,
- .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */
- .periods_min = 2,
- .periods_max = 1024,
- .buffer_bytes_max = 32 * 1024,
-};
-
-
-
-/*--------------------------------------------------------------------------*\
- * Data types
-\*--------------------------------------------------------------------------*/
-struct at32_runtime_data {
- struct at32_pcm_dma_params *params;
- dma_addr_t dma_buffer; /* physical address of DMA buffer */
- dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
- size_t period_size;
-
- dma_addr_t period_ptr; /* physical address of next period */
- int periods; /* period index of period_ptr */
-
- /* Save PDC registers (for power management) */
- u32 pdc_xpr_save;
- u32 pdc_xcr_save;
- u32 pdc_xnpr_save;
- u32 pdc_xncr_save;
-};
-
-
-
-/*--------------------------------------------------------------------------*\
- * Helper functions
-\*--------------------------------------------------------------------------*/
-static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *dmabuf = &substream->dma_buffer;
- size_t size = at32_pcm_hardware.buffer_bytes_max;
-
- dmabuf->dev.type = SNDRV_DMA_TYPE_DEV;
- dmabuf->dev.dev = pcm->card->dev;
- dmabuf->private_data = NULL;
- dmabuf->area = dma_alloc_coherent(pcm->card->dev, size,
- &dmabuf->addr, GFP_KERNEL);
- pr_debug("at32_pcm: preallocate_dma_buffer: "
- "area=%p, addr=%p, size=%ld\n",
- (void *)dmabuf->area, (void *)dmabuf->addr, size);
-
- if (!dmabuf->area)
- return -ENOMEM;
-
- dmabuf->bytes = size;
- return 0;
-}
-
-
-
-/*--------------------------------------------------------------------------*\
- * ISR
-\*--------------------------------------------------------------------------*/
-static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *rtd = substream->runtime;
- struct at32_runtime_data *prtd = rtd->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
- static int count;
-
- count++;
- if (ssc_sr & params->mask->ssc_endbuf) {
- pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- "underrun" : "overrun", params->name, ssc_sr, count);
-
- /* re-start the PDC */
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_disable);
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end)
- prtd->period_ptr = prtd->dma_buffer;
-
-
- ssc_writex(params->ssc->regs, params->pdc->xpr,
- prtd->period_ptr);
- ssc_writex(params->ssc->regs, params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_enable);
- }
-
-
- if (ssc_sr & params->mask->ssc_endx) {
- /* Load the PDC next pointer and counter registers */
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end)
- prtd->period_ptr = prtd->dma_buffer;
- ssc_writex(params->ssc->regs, params->pdc->xnpr,
- prtd->period_ptr);
- ssc_writex(params->ssc->regs, params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
- }
-
-
- snd_pcm_period_elapsed(substream);
-}
-
-
-
-/*--------------------------------------------------------------------------*\
- * PCM operations
-\*--------------------------------------------------------------------------*/
-static int at32_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
-
- /* this may get called several times by oss emulation
- * with different params
- */
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
- runtime->dma_bytes = params_buffer_bytes(params);
-
- prtd->params = rtd->dai->cpu_dai->dma_data;
- prtd->params->dma_intr_handler = at32_pcm_dma_irq;
-
- prtd->dma_buffer = runtime->dma_addr;
- prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
- prtd->period_size = params_period_bytes(params);
-
- pr_debug("hw_params: DMA for %s initialized "
- "(dma_bytes=%ld, period_size=%ld)\n",
- prtd->params->name, runtime->dma_bytes, prtd->period_size);
-
- return 0;
-}
-
-
-
-static int at32_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
-
- if (params != NULL) {
- ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
- params->mask->pdc_disable);
- prtd->params->dma_intr_handler = NULL;
- }
-
- return 0;
-}
-
-
-
-static int at32_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
-
- ssc_writex(params->ssc->regs, SSC_IDR,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_disable);
-
- return 0;
-}
-
-
-static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_pcm_runtime *rtd = substream->runtime;
- struct at32_runtime_data *prtd = rtd->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
- int ret = 0;
-
- pr_debug("at32_pcm_trigger: buffer_size = %ld, "
- "dma_area = %p, dma_bytes = %ld\n",
- rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->period_ptr = prtd->dma_buffer;
-
- ssc_writex(params->ssc->regs, params->pdc->xpr,
- prtd->period_ptr);
- ssc_writex(params->ssc->regs, params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
-
- prtd->period_ptr += prtd->period_size;
- ssc_writex(params->ssc->regs, params->pdc->xnpr,
- prtd->period_ptr);
- ssc_writex(params->ssc->regs, params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
-
- pr_debug("trigger: period_ptr=%lx, xpr=%x, "
- "xcr=%d, xnpr=%x, xncr=%d\n",
- (unsigned long)prtd->period_ptr,
- ssc_readx(params->ssc->regs, params->pdc->xpr),
- ssc_readx(params->ssc->regs, params->pdc->xcr),
- ssc_readx(params->ssc->regs, params->pdc->xnpr),
- ssc_readx(params->ssc->regs, params->pdc->xncr));
-
- ssc_writex(params->ssc->regs, SSC_IER,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
- ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
- params->mask->pdc_enable);
-
- pr_debug("sr=%x, imr=%x\n",
- ssc_readx(params->ssc->regs, SSC_SR),
- ssc_readx(params->ssc->regs, SSC_IER));
- break; /* SNDRV_PCM_TRIGGER_START */
-
-
-
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_disable);
- break;
-
-
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_enable);
- break;
-
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-
-
-static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd = runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
- dma_addr_t ptr;
- snd_pcm_uframes_t x;
-
- ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr);
- x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
-
- if (x == runtime->buffer_size)
- x = 0;
-
- return x;
-}
-
-
-
-static int at32_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd;
- int ret = 0;
-
- snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware);
-
- /* ensure that buffer size is a multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto out;
-
- prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
- runtime->private_data = prtd;
-
-
-out:
- return ret;
-}
-
-
-
-static int at32_pcm_close(struct snd_pcm_substream *substream)
-{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
-
- kfree(prtd);
- return 0;
-}
-
-
-static int at32_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- return remap_pfn_range(vma, vma->vm_start,
- substream->dma_buffer.addr >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
-}
-
-
-
-static struct snd_pcm_ops at32_pcm_ops = {
- .open = at32_pcm_open,
- .close = at32_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = at32_pcm_hw_params,
- .hw_free = at32_pcm_hw_free,
- .prepare = at32_pcm_prepare,
- .trigger = at32_pcm_trigger,
- .pointer = at32_pcm_pointer,
- .mmap = at32_pcm_mmap,
-};
-
-
-
-/*--------------------------------------------------------------------------*\
- * ASoC platform driver
-\*--------------------------------------------------------------------------*/
-static u64 at32_pcm_dmamask = 0xffffffff;
-
-static int at32_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai,
- struct snd_pcm *pcm)
-{
- int ret = 0;
-
- if (!card->dev->dma_mask)
- card->dev->dma_mask = &at32_pcm_dmamask;
- if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = 0xffffffff;
-
- if (dai->playback.channels_min) {
- ret = at32_pcm_preallocate_dma_buffer(
- pcm, SNDRV_PCM_STREAM_PLAYBACK);
- if (ret)
- goto out;
- }
-
- if (dai->capture.channels_min) {
- pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n");
- ret = at32_pcm_preallocate_dma_buffer(
- pcm, SNDRV_PCM_STREAM_CAPTURE);
- if (ret)
- goto out;
- }
-
-
-out:
- return ret;
-}
-
-
-
-static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (substream == NULL)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
- dma_free_coherent(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
-
-
-#ifdef CONFIG_PM
-static int at32_pcm_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at32_runtime_data *prtd;
- struct at32_pcm_dma_params *params;
-
- if (runtime == NULL)
- return 0;
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* Disable the PDC and save the PDC registers */
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_disable);
-
- prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
- prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
- prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr);
- prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr);
-
- return 0;
-}
-
-
-
-static int at32_pcm_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at32_runtime_data *prtd;
- struct at32_pcm_dma_params *params;
-
- if (runtime == NULL)
- return 0;
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* Restore the PDC registers and enable the PDC */
- ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save);
- ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save);
- ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
- ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
-
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable);
- return 0;
-}
-#else /* CONFIG_PM */
-# define at32_pcm_suspend NULL
-# define at32_pcm_resume NULL
-#endif /* CONFIG_PM */
-
-
-
-struct snd_soc_platform at32_soc_platform = {
- .name = "at32-audio",
- .pcm_ops = &at32_pcm_ops,
- .pcm_new = at32_pcm_new,
- .pcm_free = at32_pcm_free_dma_buffers,
- .suspend = at32_pcm_suspend,
- .resume = at32_pcm_resume,
-};
-EXPORT_SYMBOL_GPL(at32_soc_platform);
-
-
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("Atmel AT32 PCM module");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* sound/soc/at32/at32-pcm.h
- * ASoC PCM interface for Atmel AT32 SoC
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SOUND_SOC_AT32_AT32_PCM_H
-#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__
-
-#include <linux/atmel-ssc.h>
-
-
-/*
- * Registers and status bits that are required by the PCM driver
- * TODO: Is ptcr really used?
- */
-struct at32_pdc_regs {
- u32 xpr; /* PDC RX/TX pointer */
- u32 xcr; /* PDC RX/TX counter */
- u32 xnpr; /* PDC next RX/TX pointer */
- u32 xncr; /* PDC next RX/TX counter */
- u32 ptcr; /* PDC transfer control */
-};
-
-
-
-/*
- * SSC mask info
- */
-struct at32_ssc_mask {
- u32 ssc_enable; /* SSC RX/TX enable */
- u32 ssc_disable; /* SSC RX/TX disable */
- u32 ssc_endx; /* SSC ENDTX or ENDRX */
- u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */
- u32 pdc_enable; /* PDC RX/TX enable */
- u32 pdc_disable; /* PDC RX/TX disable */
-};
-
-
-
-/*
- * This structure, shared between the PCM driver and the interface,
- * contains all information required by the PCM driver to perform the
- * PDC DMA operation. All fields except dma_intr_handler() are initialized
- * by the interface. The dms_intr_handler() pointer is set by the PCM
- * driver and called by the interface SSC interrupt handler if it is
- * non-NULL.
- */
-struct at32_pcm_dma_params {
- char *name; /* stream identifier */
- int pdc_xfer_size; /* PDC counter increment in bytes */
- struct ssc_device *ssc; /* SSC device for stream */
- struct at32_pdc_regs *pdc; /* PDC register info */
- struct at32_ssc_mask *mask; /* SSC mask info */
- struct snd_pcm_substream *substream;
- void (*dma_intr_handler) (u32, struct snd_pcm_substream *);
-};
-
-
-
-/*
- * The AT32 ASoC platform driver
- */
-extern struct snd_soc_platform at32_soc_platform;
-
-
-
-/*
- * SSC register access (since ssc_writel() / ssc_readl() require literal name)
- */
-#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
-#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
-
-#endif /* __SOUND_SOC_AT32_AT32_PCM_H */
+++ /dev/null
-/* sound/soc/at32/at32-ssc.c
- * ASoC platform driver for AT32 using SSC as DAI
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note that this is basically a port of the sound/soc/at91-ssc.c to
- * the AVR32 kernel. Thanks to Frank Mandarino for that code.
- */
-
-/* #define DEBUG */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/atmel_pdc.h>
-#include <linux/atmel-ssc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include "at32-pcm.h"
-#include "at32-ssc.h"
-
-
-
-/*-------------------------------------------------------------------------*\
- * Constants
-\*-------------------------------------------------------------------------*/
-#define NUM_SSC_DEVICES 3
-
-/*
- * SSC direction masks
- */
-#define SSC_DIR_MASK_UNUSED 0
-#define SSC_DIR_MASK_PLAYBACK 1
-#define SSC_DIR_MASK_CAPTURE 2
-
-/*
- * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
- * are expected to be used with SSC_BF
- */
-/* START bit field values */
-#define SSC_START_CONTINUOUS 0
-#define SSC_START_TX_RX 1
-#define SSC_START_LOW_RF 2
-#define SSC_START_HIGH_RF 3
-#define SSC_START_FALLING_RF 4
-#define SSC_START_RISING_RF 5
-#define SSC_START_LEVEL_RF 6
-#define SSC_START_EDGE_RF 7
-#define SSS_START_COMPARE_0 8
-
-/* CKI bit field values */
-#define SSC_CKI_FALLING 0
-#define SSC_CKI_RISING 1
-
-/* CKO bit field values */
-#define SSC_CKO_NONE 0
-#define SSC_CKO_CONTINUOUS 1
-#define SSC_CKO_TRANSFER 2
-
-/* CKS bit field values */
-#define SSC_CKS_DIV 0
-#define SSC_CKS_CLOCK 1
-#define SSC_CKS_PIN 2
-
-/* FSEDGE bit field values */
-#define SSC_FSEDGE_POSITIVE 0
-#define SSC_FSEDGE_NEGATIVE 1
-
-/* FSOS bit field values */
-#define SSC_FSOS_NONE 0
-#define SSC_FSOS_NEGATIVE 1
-#define SSC_FSOS_POSITIVE 2
-#define SSC_FSOS_LOW 3
-#define SSC_FSOS_HIGH 4
-#define SSC_FSOS_TOGGLE 5
-
-#define START_DELAY 1
-
-
-
-/*-------------------------------------------------------------------------*\
- * Module data
-\*-------------------------------------------------------------------------*/
-/*
- * SSC PDC registered required by the PCM DMA engine
- */
-static struct at32_pdc_regs pdc_tx_reg = {
- .xpr = SSC_PDC_TPR,
- .xcr = SSC_PDC_TCR,
- .xnpr = SSC_PDC_TNPR,
- .xncr = SSC_PDC_TNCR,
-};
-
-
-
-static struct at32_pdc_regs pdc_rx_reg = {
- .xpr = SSC_PDC_RPR,
- .xcr = SSC_PDC_RCR,
- .xnpr = SSC_PDC_RNPR,
- .xncr = SSC_PDC_RNCR,
-};
-
-
-
-/*
- * SSC and PDC status bits for transmit and receive
- */
-static struct at32_ssc_mask ssc_tx_mask = {
- .ssc_enable = SSC_BIT(CR_TXEN),
- .ssc_disable = SSC_BIT(CR_TXDIS),
- .ssc_endx = SSC_BIT(SR_ENDTX),
- .ssc_endbuf = SSC_BIT(SR_TXBUFE),
- .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS),
-};
-
-
-
-static struct at32_ssc_mask ssc_rx_mask = {
- .ssc_enable = SSC_BIT(CR_RXEN),
- .ssc_disable = SSC_BIT(CR_RXDIS),
- .ssc_endx = SSC_BIT(SR_ENDRX),
- .ssc_endbuf = SSC_BIT(SR_RXBUFF),
- .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS),
-};
-
-
-
-/*
- * DMA parameters for each SSC
- */
-static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
- {
- {
- .name = "SSC0 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC0 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC1 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC1 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC2 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC2 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
-};
-
-
-
-static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = {
- {
- .name = "ssc0",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc1",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc2",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
-};
-
-
-
-
-/*-------------------------------------------------------------------------*\
- * ISR
-\*-------------------------------------------------------------------------*/
-/*
- * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt
- * handler in the PCM driver.
- */
-static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id)
-{
- struct at32_ssc_info *ssc_p = dev_id;
- struct at32_pcm_dma_params *dma_params;
- u32 ssc_sr;
- u32 ssc_substream_mask;
- int i;
-
- ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) &
- ssc_readl(ssc_p->ssc->regs, IMR));
-
- /*
- * Loop through substreams attached to this SSC. If a DMA-related
- * interrupt occured on that substream, call the DMA interrupt
- * handler function, if one has been registered in the dma_param
- * structure by the PCM driver.
- */
- for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
- dma_params = ssc_p->dma_params[i];
-
- if ((dma_params != NULL) &&
- (dma_params->dma_intr_handler != NULL)) {
- ssc_substream_mask = (dma_params->mask->ssc_endx |
- dma_params->mask->ssc_endbuf);
- if (ssc_sr & ssc_substream_mask) {
- dma_params->dma_intr_handler(ssc_sr,
- dma_params->
- substream);
- }
- }
- }
-
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*\
- * DAI functions
-\*-------------------------------------------------------------------------*/
-/*
- * Startup. Only that one substream allowed in each direction.
- */
-static int at32_ssc_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- int dir_mask;
-
- dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE);
-
- spin_lock_irq(&ssc_p->lock);
- if (ssc_p->dir_mask & dir_mask) {
- spin_unlock_irq(&ssc_p->lock);
- return -EBUSY;
- }
- ssc_p->dir_mask |= dir_mask;
- spin_unlock_irq(&ssc_p->lock);
-
- return 0;
-}
-
-
-
-/*
- * Shutdown. Clear DMA parameters and shutdown the SSC if there
- * are no other substreams open.
- */
-static void at32_ssc_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
- int dir_mask;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- if (dma_params != NULL) {
- ssc_writel(dma_params->ssc->regs, CR,
- dma_params->mask->ssc_disable);
- pr_debug("%s disabled SSC_SR=0x%08x\n",
- (substream->stream ? "receiver" : "transmit"),
- ssc_readl(ssc_p->ssc->regs, SR));
-
- dma_params->ssc = NULL;
- dma_params->substream = NULL;
- ssc_p->dma_params[substream->stream] = NULL;
- }
-
-
- dir_mask = 1 << substream->stream;
- spin_lock_irq(&ssc_p->lock);
- ssc_p->dir_mask &= ~dir_mask;
- if (!ssc_p->dir_mask) {
- /* Shutdown the SSC clock */
- pr_debug("at32-ssc: Stopping user %d clock\n",
- ssc_p->ssc->user);
- clk_disable(ssc_p->ssc->clk);
-
- if (ssc_p->initialized) {
- free_irq(ssc_p->ssc->irq, ssc_p);
- ssc_p->initialized = 0;
- }
-
- /* Reset the SSC */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- /* clear the SSC dividers */
- ssc_p->cmr_div = 0;
- ssc_p->tcmr_period = 0;
- ssc_p->rcmr_period = 0;
- }
- spin_unlock_irq(&ssc_p->lock);
-}
-
-
-
-/*
- * Set the SSC system clock rate
- */
-static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- /* TODO: What the heck do I do here? */
- return 0;
-}
-
-
-
-/*
- * Record DAI format for use by hw_params()
- */
-static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- ssc_p->daifmt = fmt;
- return 0;
-}
-
-
-
-/*
- * Record SSC clock dividers for use in hw_params()
- */
-static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- switch (div_id) {
- case AT32_SSC_CMR_DIV:
- /*
- * The same master clock divider is used for both
- * transmit and receive, so if a value has already
- * been set, it must match this value
- */
- if (ssc_p->cmr_div == 0)
- ssc_p->cmr_div = div;
- else if (div != ssc_p->cmr_div)
- return -EBUSY;
- break;
-
- case AT32_SSC_TCMR_PERIOD:
- ssc_p->tcmr_period = div;
- break;
-
- case AT32_SSC_RCMR_PERIOD:
- ssc_p->rcmr_period = div;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-
-/*
- * Configure the SSC
- */
-static int at32_ssc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int id = rtd->dai->cpu_dai->id;
- struct at32_ssc_info *ssc_p = &ssc_info[id];
- struct at32_pcm_dma_params *dma_params;
- int channels, bits;
- u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
- int ret;
-
-
- /*
- * Currently, there is only one set of dma_params for each direction.
- * If more are added, this code will have to be changed to select
- * the proper set
- */
- dma_params = &ssc_dma_params[id][substream->stream];
- dma_params->ssc = ssc_p->ssc;
- dma_params->substream = substream;
-
- ssc_p->dma_params[substream->stream] = dma_params;
-
-
- /*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the PCM driver's hw_params()
- * function. It should not be used for other purposes as it
- * is common to all substreams.
- */
- rtd->dai->cpu_dai->dma_data = dma_params;
-
- channels = params_channels(params);
-
-
- /*
- * Determine sample size in bits and the PDC increment
- */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- bits = 8;
- dma_params->pdc_xfer_size = 1;
- break;
-
- case SNDRV_PCM_FORMAT_S16:
- bits = 16;
- dma_params->pdc_xfer_size = 2;
- break;
-
- case SNDRV_PCM_FORMAT_S24:
- bits = 24;
- dma_params->pdc_xfer_size = 4;
- break;
-
- case SNDRV_PCM_FORMAT_S32:
- bits = 32;
- dma_params->pdc_xfer_size = 4;
- break;
-
- default:
- pr_warning("at32-ssc: Unsupported PCM format %d",
- params_format(params));
- return -EINVAL;
- }
- pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n",
- bits, dma_params->pdc_xfer_size, channels);
-
-
- /*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field.
- */
- if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S)
- if (bits > 16) {
- pr_warning("at32-ssc: "
- "sample size %d is too large for I2S\n",
- bits);
- return -EINVAL;
- }
-
-
- /*
- * Compute the SSC register settings
- */
- switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK |
- SND_SOC_DAIFMT_MASTER_MASK)) {
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * I2S format, SSC provides BCLK and LRS clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(RFMR_FSLEN, bits - 1) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(TFMR_FSLEN, bits - 1) |
- SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) |
- SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
- /*
- * I2S format, CODEC supplies BCLK and LRC clock.
- *
- * The SSC transmit clock is obtained from the BCLK signal
- * on the TK line, and the SSC receive clock is generated from
- * the transmit clock.
- *
- * For single channel data, one sample is transferred on the
- * falling edge of the LRC clock. For two channel data, one
- * sample is transferred on both edges of the LRC clock.
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n");
- start_event = ((channels == 1) ?
- SSC_START_FALLING_RF : SSC_START_EDGE_RF);
-
- rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, start_event) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_CLOCK));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, start_event) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(TCMR_CKS, SSC_CKS_PIN));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, 1) |
- SSC_BF(RCMR_START, SSC_START_RISING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, 1) |
- SSC_BF(TCMR_START, SSC_START_RISING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(TFMR_DATNB, channels - 1) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
- default:
- pr_warning("at32-ssc: unsupported DAI format 0x%x\n",
- ssc_p->daifmt);
- return -EINVAL;
- break;
- }
- pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
- rcmr, rfmr, tcmr, tfmr);
-
-
- if (!ssc_p->initialized) {
- /* enable peripheral clock */
- pr_debug("at32-ssc: Starting clock\n");
- clk_enable(ssc_p->ssc->clk);
-
- /* Reset the SSC and its PDC registers */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
- ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
-
- ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0,
- ssc_p->name, ssc_p);
- if (ret < 0) {
- pr_warning("at32-ssc: request irq failed (%d)\n", ret);
- pr_debug("at32-ssc: Stopping clock\n");
- clk_disable(ssc_p->ssc->clk);
- return ret;
- }
-
- ssc_p->initialized = 1;
- }
-
- /* Set SSC clock mode register */
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
-
- /* set receive clock mode and format */
- ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
-
- /* set transmit clock mode and format */
- ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
- ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
-
- pr_debug("at32-ssc: SSC initialized\n");
- return 0;
-}
-
-
-
-static int at32_ssc_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable);
-
- return 0;
-}
-
-
-
-#ifdef CONFIG_PM
-static int at32_ssc_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* Save the status register before disabling transmit and receive */
- ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
-
- /* Save the current interrupt mask, then disable unmasked interrupts */
- ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
- ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
-
- ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
- ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
- ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
- ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
- ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
-
- return 0;
-}
-
-
-
-static int at32_ssc_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
- u32 cr;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* restore SSC register settings */
- ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
- ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
- ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
-
- /* re-enable interrupts */
- ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
-
- /* Re-enable recieve and transmit as appropriate */
- cr = 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
- ssc_writel(ssc_p->ssc->regs, CR, cr);
-
- return 0;
-}
-#else /* CONFIG_PM */
-# define at32_ssc_suspend NULL
-# define at32_ssc_resume NULL
-#endif /* CONFIG_PM */
-
-
-#define AT32_SSC_RATES \
- (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
- SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-
-#define AT32_SSC_FORMATS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \
- SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32)
-
-
-struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = {
- {
- .name = "at32-ssc0",
- .id = 0,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[0],
- },
- {
- .name = "at32-ssc1",
- .id = 1,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[1],
- },
- {
- .name = "at32-ssc2",
- .id = 2,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[2],
- },
-};
-EXPORT_SYMBOL_GPL(at32_ssc_dai);
-
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("AT32 SSC ASoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* sound/soc/at32/at32-ssc.h
- * ASoC SSC interface for Atmel AT32 SoC
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SOUND_SOC_AT32_AT32_SSC_H
-#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__
-
-#include <linux/types.h>
-#include <linux/atmel-ssc.h>
-
-#include "at32-pcm.h"
-
-
-
-struct at32_ssc_state {
- u32 ssc_cmr;
- u32 ssc_rcmr;
- u32 ssc_rfmr;
- u32 ssc_tcmr;
- u32 ssc_tfmr;
- u32 ssc_sr;
- u32 ssc_imr;
-};
-
-
-
-struct at32_ssc_info {
- char *name;
- struct ssc_device *ssc;
- spinlock_t lock; /* lock for dir_mask */
- unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
- unsigned short initialized; /* true if SSC has been initialized */
- unsigned short daifmt;
- unsigned short cmr_div;
- unsigned short tcmr_period;
- unsigned short rcmr_period;
- struct at32_pcm_dma_params *dma_params[2];
- struct at32_ssc_state ssc_state;
-};
-
-
-/* SSC divider ids */
-#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */
-#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
-#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
-
-
-extern struct snd_soc_dai at32_ssc_dai[];
-
-
-
-#endif /* __SOUND_SOC_AT32_AT32_SSC_H */
+++ /dev/null
-config SND_AT91_SOC
- tristate "SoC Audio for the Atmel AT91 System-on-Chip"
- depends on ARCH_AT91
- help
- Say Y or M if you want to add support for codecs attached to
- the AT91 SSC interface. You will also need
- to select the audio interfaces to support below.
-
-config SND_AT91_SOC_SSC
- tristate
+++ /dev/null
-# AT91 Platform Support
-snd-soc-at91-objs := at91-pcm.o
-snd-soc-at91-ssc-objs := at91-ssc.o
-
-obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o
-obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o
+++ /dev/null
-/*
- * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Mar 3, 2006
- *
- * Based on pxa2xx-pcm.c by:
- *
- * Author: Nicolas Pitre
- * Created: Nov 30, 2004
- * Copyright: (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/atmel_pdc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_ssc.h>
-
-#include "at91-pcm.h"
-
-#if 0
-#define DBG(x...) printk(KERN_INFO "at91-pcm: " x)
-#else
-#define DBG(x...)
-#endif
-
-static const struct snd_pcm_hardware at91_pcm_hardware = {
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_PAUSE,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .period_bytes_min = 32,
- .period_bytes_max = 8192,
- .periods_min = 2,
- .periods_max = 1024,
- .buffer_bytes_max = 32 * 1024,
-};
-
-struct at91_runtime_data {
- struct at91_pcm_dma_params *params;
- dma_addr_t dma_buffer; /* physical address of dma buffer */
- dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
- size_t period_size;
- dma_addr_t period_ptr; /* physical address of next period */
- u32 pdc_xpr_save; /* PDC register save */
- u32 pdc_xcr_save;
- u32 pdc_xnpr_save;
- u32 pdc_xncr_save;
-};
-
-static void at91_pcm_dma_irq(u32 ssc_sr,
- struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- static int count = 0;
-
- count++;
-
- if (ssc_sr & params->mask->ssc_endbuf) {
-
- printk(KERN_WARNING
- "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK
- ? "underrun" : "overrun",
- params->name, ssc_sr, count);
-
- /* re-start the PDC */
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
-
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end) {
- prtd->period_ptr = prtd->dma_buffer;
- }
-
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- }
-
- if (ssc_sr & params->mask->ssc_endx) {
-
- /* Load the PDC next pointer and counter registers */
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end) {
- prtd->period_ptr = prtd->dma_buffer;
- }
- at91_ssc_write(params->ssc_base + params->pdc->xnpr,
- prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
- }
-
- snd_pcm_period_elapsed(substream);
-}
-
-static int at91_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
-
- /* this may get called several times by oss emulation
- * with different params */
-
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
- runtime->dma_bytes = params_buffer_bytes(params);
-
- prtd->params = rtd->dai->cpu_dai->dma_data;
- prtd->params->dma_intr_handler = at91_pcm_dma_irq;
-
- prtd->dma_buffer = runtime->dma_addr;
- prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
- prtd->period_size = params_period_bytes(params);
-
- DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n",
- prtd->params->name, runtime->dma_bytes, prtd->period_size);
- return 0;
-}
-
-static int at91_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
-
- if (params != NULL) {
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- prtd->params->dma_intr_handler = NULL;
- }
-
- return 0;
-}
-
-static int at91_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
-
- at91_ssc_write(params->ssc_base + AT91_SSC_IDR,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- return 0;
-}
-
-static int at91_pcm_trigger(struct snd_pcm_substream *substream,
- int cmd)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- int ret = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->period_ptr = prtd->dma_buffer;
-
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
-
- prtd->period_ptr += prtd->period_size;
- at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
-
- DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n",
- (unsigned long) prtd->period_ptr,
- at91_ssc_read(params->ssc_base + params->pdc->xpr),
- at91_ssc_read(params->ssc_base + params->pdc->xcr),
- at91_ssc_read(params->ssc_base + params->pdc->xnpr),
- at91_ssc_read(params->ssc_base + params->pdc->xncr));
-
- at91_ssc_write(params->ssc_base + AT91_SSC_IER,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR,
- params->mask->pdc_enable);
-
- DBG("sr=%lx imr=%lx\n",
- at91_ssc_read(params->ssc_base + AT91_SSC_SR),
- at91_ssc_read(params->ssc_base + AT91_SSC_IMR));
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- break;
-
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- break;
-
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static snd_pcm_uframes_t at91_pcm_pointer(
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd = runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- dma_addr_t ptr;
- snd_pcm_uframes_t x;
-
- ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr);
- x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
-
- if (x == runtime->buffer_size)
- x = 0;
- return x;
-}
-
-static int at91_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd;
- int ret = 0;
-
- snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware);
-
- /* ensure that buffer size is a multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto out;
-
- prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
- runtime->private_data = prtd;
-
- out:
- return ret;
-}
-
-static int at91_pcm_close(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
-
- kfree(prtd);
- return 0;
-}
-
-static int at91_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-struct snd_pcm_ops at91_pcm_ops = {
- .open = at91_pcm_open,
- .close = at91_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = at91_pcm_hw_params,
- .hw_free = at91_pcm_hw_free,
- .prepare = at91_pcm_prepare,
- .trigger = at91_pcm_trigger,
- .pointer = at91_pcm_pointer,
- .mmap = at91_pcm_mmap,
-};
-
-static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
- int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- size_t size = at91_pcm_hardware.buffer_bytes_max;
-
- buf->dev.type = SNDRV_DMA_TYPE_DEV;
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
- &buf->addr, GFP_KERNEL);
-
- DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
- (void *) buf->area,
- (void *) buf->addr,
- size);
-
- if (!buf->area)
- return -ENOMEM;
-
- buf->bytes = size;
- return 0;
-}
-
-static u64 at91_pcm_dmamask = 0xffffffff;
-
-static int at91_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
-{
- int ret = 0;
-
- if (!card->dev->dma_mask)
- card->dev->dma_mask = &at91_pcm_dmamask;
- if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = 0xffffffff;
-
- if (dai->playback.channels_min) {
- ret = at91_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_PLAYBACK);
- if (ret)
- goto out;
- }
-
- if (dai->capture.channels_min) {
- ret = at91_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_CAPTURE);
- if (ret)
- goto out;
- }
- out:
- return ret;
-}
-
-static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (!substream)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
-
- dma_free_writecombine(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
-#ifdef CONFIG_PM
-static int at91_pcm_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at91_runtime_data *prtd;
- struct at91_pcm_dma_params *params;
-
- if (!runtime)
- return 0;
-
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* disable the PDC and save the PDC registers */
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
-
- prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr);
- prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr);
- prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr);
- prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr);
-
- return 0;
-}
-
-static int at91_pcm_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at91_runtime_data *prtd;
- struct at91_pcm_dma_params *params;
-
- if (!runtime)
- return 0;
-
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* restore the PDC registers and enable the PDC */
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- return 0;
-}
-#else
-#define at91_pcm_suspend NULL
-#define at91_pcm_resume NULL
-#endif
-
-struct snd_soc_platform at91_soc_platform = {
- .name = "at91-audio",
- .pcm_ops = &at91_pcm_ops,
- .pcm_new = at91_pcm_new,
- .pcm_free = at91_pcm_free_dma_buffers,
- .suspend = at91_pcm_suspend,
- .resume = at91_pcm_resume,
-};
-
-EXPORT_SYMBOL_GPL(at91_soc_platform);
-
-MODULE_AUTHOR("Frank Mandarino <fmandarino@endrelia.com>");
-MODULE_DESCRIPTION("Atmel AT91 PCM module");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Mar 3, 2006
- *
- * Based on pxa2xx-pcm.h by:
- *
- * Author: Nicolas Pitre
- * Created: Nov 30, 2004
- * Copyright: MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _AT91_PCM_H
-#define _AT91_PCM_H
-
-#include <mach/hardware.h>
-
-struct at91_ssc_periph {
- void __iomem *base;
- u32 pid;
-};
-
-/*
- * Registers and status bits that are required by the PCM driver.
- */
-struct at91_pdc_regs {
- unsigned int xpr; /* PDC recv/trans pointer */
- unsigned int xcr; /* PDC recv/trans counter */
- unsigned int xnpr; /* PDC next recv/trans pointer */
- unsigned int xncr; /* PDC next recv/trans counter */
- unsigned int ptcr; /* PDC transfer control */
-};
-
-struct at91_ssc_mask {
- u32 ssc_enable; /* SSC recv/trans enable */
- u32 ssc_disable; /* SSC recv/trans disable */
- u32 ssc_endx; /* SSC ENDTX or ENDRX */
- u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
- u32 pdc_enable; /* PDC recv/trans enable */
- u32 pdc_disable; /* PDC recv/trans disable */
-};
-
-/*
- * This structure, shared between the PCM driver and the interface,
- * contains all information required by the PCM driver to perform the
- * PDC DMA operation. All fields except dma_intr_handler() are initialized
- * by the interface. The dms_intr_handler() pointer is set by the PCM
- * driver and called by the interface SSC interrupt handler if it is
- * non-NULL.
- */
-struct at91_pcm_dma_params {
- char *name; /* stream identifier */
- int pdc_xfer_size; /* PDC counter increment in bytes */
- void __iomem *ssc_base; /* SSC base address */
- struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */
- struct at91_ssc_mask *mask;/* SSC & PDC status bits */
- struct snd_pcm_substream *substream;
- void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
-};
-
-extern struct snd_soc_platform at91_soc_platform;
-
-#define at91_ssc_read(a) ((unsigned long) __raw_readl(a))
-#define at91_ssc_write(a,v) __raw_writel((v),(a))
-
-#endif /* _AT91_PCM_H */
+++ /dev/null
-/*
- * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- *
- * Based on pxa2xx Platform drivers by
- * Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_ssc.h>
-
-#include "at91-pcm.h"
-#include "at91-ssc.h"
-
-#if 0
-#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x)
-#else
-#define DBG(x...)
-#endif
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#define NUM_SSC_DEVICES 1
-#else
-#define NUM_SSC_DEVICES 3
-#endif
-
-
-/*
- * SSC PDC registers required by the PCM DMA engine.
- */
-static struct at91_pdc_regs pdc_tx_reg = {
- .xpr = ATMEL_PDC_TPR,
- .xcr = ATMEL_PDC_TCR,
- .xnpr = ATMEL_PDC_TNPR,
- .xncr = ATMEL_PDC_TNCR,
-};
-
-static struct at91_pdc_regs pdc_rx_reg = {
- .xpr = ATMEL_PDC_RPR,
- .xcr = ATMEL_PDC_RCR,
- .xnpr = ATMEL_PDC_RNPR,
- .xncr = ATMEL_PDC_RNCR,
-};
-
-/*
- * SSC & PDC status bits for transmit and receive.
- */
-static struct at91_ssc_mask ssc_tx_mask = {
- .ssc_enable = AT91_SSC_TXEN,
- .ssc_disable = AT91_SSC_TXDIS,
- .ssc_endx = AT91_SSC_ENDTX,
- .ssc_endbuf = AT91_SSC_TXBUFE,
- .pdc_enable = ATMEL_PDC_TXTEN,
- .pdc_disable = ATMEL_PDC_TXTDIS,
-};
-
-static struct at91_ssc_mask ssc_rx_mask = {
- .ssc_enable = AT91_SSC_RXEN,
- .ssc_disable = AT91_SSC_RXDIS,
- .ssc_endx = AT91_SSC_ENDRX,
- .ssc_endbuf = AT91_SSC_RXBUFF,
- .pdc_enable = ATMEL_PDC_RXTEN,
- .pdc_disable = ATMEL_PDC_RXTDIS,
-};
-
-
-/*
- * DMA parameters.
- */
-static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
- {{
- .name = "SSC0 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC0 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
-#if NUM_SSC_DEVICES == 3
- {{
- .name = "SSC1 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC1 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
- {{
- .name = "SSC2 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC2 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
-#endif
-};
-
-struct at91_ssc_state {
- u32 ssc_cmr;
- u32 ssc_rcmr;
- u32 ssc_rfmr;
- u32 ssc_tcmr;
- u32 ssc_tfmr;
- u32 ssc_sr;
- u32 ssc_imr;
-};
-
-static struct at91_ssc_info {
- char *name;
- struct at91_ssc_periph ssc;
- spinlock_t lock; /* lock for dir_mask */
- unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
- unsigned short initialized; /* 1=SSC has been initialized */
- unsigned short daifmt;
- unsigned short cmr_div;
- unsigned short tcmr_period;
- unsigned short rcmr_period;
- struct at91_pcm_dma_params *dma_params[2];
- struct at91_ssc_state ssc_state;
-
-} ssc_info[NUM_SSC_DEVICES] = {
- {
- .name = "ssc0",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
-#if NUM_SSC_DEVICES == 3
- {
- .name = "ssc1",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
- {
- .name = "ssc2",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
-#endif
-};
-
-static unsigned int at91_ssc_sysclk;
-
-/*
- * SSC interrupt handler. Passes PDC interrupts to the DMA
- * interrupt handler in the PCM driver.
- */
-static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id)
-{
- struct at91_ssc_info *ssc_p = dev_id;
- struct at91_pcm_dma_params *dma_params;
- u32 ssc_sr;
- int i;
-
- ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)
- & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR);
-
- /*
- * Loop through the substreams attached to this SSC. If
- * a DMA-related interrupt occurred on that substream, call
- * the DMA interrupt handler function, if one has been
- * registered in the dma_params structure by the PCM driver.
- */
- for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
- dma_params = ssc_p->dma_params[i];
-
- if (dma_params != NULL && dma_params->dma_intr_handler != NULL &&
- (ssc_sr &
- (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf)))
-
- dma_params->dma_intr_handler(ssc_sr, dma_params->substream);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Startup. Only that one substream allowed in each direction.
- */
-static int at91_ssc_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- int dir_mask;
-
- DBG("ssc_startup: SSC_SR=0x%08lx\n",
- at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR));
- dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2;
-
- spin_lock_irq(&ssc_p->lock);
- if (ssc_p->dir_mask & dir_mask) {
- spin_unlock_irq(&ssc_p->lock);
- return -EBUSY;
- }
- ssc_p->dir_mask |= dir_mask;
- spin_unlock_irq(&ssc_p->lock);
-
- return 0;
-}
-
-/*
- * Shutdown. Clear DMA parameters and shutdown the SSC if there
- * are no other substreams open.
- */
-static void at91_ssc_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at91_pcm_dma_params *dma_params;
- int dir, dir_mask;
-
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- dma_params = ssc_p->dma_params[dir];
-
- if (dma_params != NULL) {
- at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR,
- dma_params->mask->ssc_disable);
- DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"),
- at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR));
-
- dma_params->ssc_base = NULL;
- dma_params->substream = NULL;
- ssc_p->dma_params[dir] = NULL;
- }
-
- dir_mask = 1 << dir;
-
- spin_lock_irq(&ssc_p->lock);
- ssc_p->dir_mask &= ~dir_mask;
- if (!ssc_p->dir_mask) {
- /* Shutdown the SSC clock. */
- DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid);
-
- if (ssc_p->initialized) {
- free_irq(ssc_p->ssc.pid, ssc_p);
- ssc_p->initialized = 0;
- }
-
- /* Reset the SSC */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST);
-
- /* Clear the SSC dividers */
- ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
- }
- spin_unlock_irq(&ssc_p->lock);
-}
-
-/*
- * Record the SSC system clock rate.
- */
-static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- /*
- * The only clock supplied to the SSC is the AT91 master clock,
- * which is only used if the SSC is generating BCLK and/or
- * LRC clocks.
- */
- switch (clk_id) {
- case AT91_SYSCLK_MCK:
- at91_ssc_sysclk = freq;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Record the DAI format for use in hw_params().
- */
-static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- ssc_p->daifmt = fmt;
- return 0;
-}
-
-/*
- * Record SSC clock dividers for use in hw_params().
- */
-static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- switch (div_id) {
- case AT91SSC_CMR_DIV:
- /*
- * The same master clock divider is used for both
- * transmit and receive, so if a value has already
- * been set, it must match this value.
- */
- if (ssc_p->cmr_div == 0)
- ssc_p->cmr_div = div;
- else
- if (div != ssc_p->cmr_div)
- return -EBUSY;
- break;
-
- case AT91SSC_TCMR_PERIOD:
- ssc_p->tcmr_period = div;
- break;
-
- case AT91SSC_RCMR_PERIOD:
- ssc_p->rcmr_period = div;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Configure the SSC.
- */
-static int at91_ssc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int id = rtd->dai->cpu_dai->id;
- struct at91_ssc_info *ssc_p = &ssc_info[id];
- struct at91_pcm_dma_params *dma_params;
- int dir, channels, bits;
- u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
- int ret;
-
- /*
- * Currently, there is only one set of dma params for
- * each direction. If more are added, this code will
- * have to be changed to select the proper set.
- */
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- dma_params = &ssc_dma_params[id][dir];
- dma_params->ssc_base = ssc_p->ssc.base;
- dma_params->substream = substream;
-
- ssc_p->dma_params[dir] = dma_params;
-
- /*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the pcm driver hw_params()
- * function. It should not be used for other purposes
- * as it is common to all substreams.
- */
- rtd->dai->cpu_dai->dma_data = dma_params;
-
- channels = params_channels(params);
-
- /*
- * Determine sample size in bits and the PDC increment.
- */
- switch(params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- bits = 8;
- dma_params->pdc_xfer_size = 1;
- break;
- case SNDRV_PCM_FORMAT_S16_LE:
- bits = 16;
- dma_params->pdc_xfer_size = 2;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- bits = 24;
- dma_params->pdc_xfer_size = 4;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- bits = 32;
- dma_params->pdc_xfer_size = 4;
- break;
- default:
- printk(KERN_WARNING "at91-ssc: unsupported PCM format\n");
- return -EINVAL;
- }
-
- /*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field.
- */
- if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
- && bits > 16) {
- printk(KERN_WARNING
- "at91-ssc: sample size %d is too large for I2S\n", bits);
- return -EINVAL;
- }
-
- /*
- * Compute SSC register settings.
- */
- switch (ssc_p->daifmt
- & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * I2S format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line.
- */
- rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS)
- | (((bits - 1) << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS)
- | (((bits - 1) << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
- break;
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
- /*
- * I2S format, CODEC supplies BCLK and LRC clocks.
- *
- * The SSC transmit clock is obtained from the BCLK signal on
- * on the TK line, and the SSC receive clock is generated from the
- * transmit clock.
- *
- * For single channel data, one sample is transferred on the falling
- * edge of the LRC clock. For two channel data, one sample is
- * transferred on both edges of the LRC clock.
- */
- start_event = channels == 1
- ? AT91_SSC_START_FALLING_RF
- : AT91_SSC_START_EDGE_RF;
-
- rcmr = (( 0 << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( start_event ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (( 0 << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( 0 << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( start_event ) & AT91_SSC_START)
- | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (( 0 << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
- break;
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line.
- */
- rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
-
-
- break;
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
- default:
- printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n",
- ssc_p->daifmt);
- return -EINVAL;
- break;
- }
- DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr);
-
- if (!ssc_p->initialized) {
-
- /* Enable PMC peripheral clock for this SSC */
- DBG("Starting pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid);
-
- /* Reset the SSC and its PDC registers */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST);
-
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0);
-
- if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt,
- 0, ssc_p->name, ssc_p)) < 0) {
- printk(KERN_WARNING "at91-ssc: request_irq failure\n");
-
- DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid);
- return ret;
- }
-
- ssc_p->initialized = 1;
- }
-
- /* set SSC clock mode register */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div);
-
- /* set receive clock mode and format */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr);
-
- /* set transmit clock mode and format */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr);
-
- DBG("hw_params: SSC initialized\n");
- return 0;
-}
-
-
-static int at91_ssc_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at91_pcm_dma_params *dma_params;
- int dir;
-
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- dma_params = ssc_p->dma_params[dir];
-
- at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR,
- dma_params->mask->ssc_enable);
-
- DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit",
- at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR));
- return 0;
-}
-
-
-#ifdef CONFIG_PM
-static int at91_ssc_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at91_ssc_info *ssc_p;
-
- if(!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* Save the status register before disabling transmit and receive. */
- ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR,
- AT91_SSC_TXDIS | AT91_SSC_RXDIS);
-
- /* Save the current interrupt mask, then disable unmasked interrupts. */
- ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr);
-
- ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR);
- ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR);
- ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR);
- ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR);
- ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR);
-
- return 0;
-}
-
-static int at91_ssc_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at91_ssc_info *ssc_p;
-
- if(!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr);
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr);
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR,
- ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) |
- ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0));
-
- return 0;
-}
-
-#else
-#define at91_ssc_suspend NULL
-#define at91_ssc_resume NULL
-#endif
-
-#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
- SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
- SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
- SNDRV_PCM_RATE_96000)
-
-#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
-
-struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = {
- { .name = "at91-ssc0",
- .id = 0,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[0].ssc,
- },
-#if NUM_SSC_DEVICES == 3
- { .name = "at91-ssc1",
- .id = 1,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[1].ssc,
- },
- { .name = "at91-ssc2",
- .id = 2,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[2].ssc,
- },
-#endif
-};
-
-EXPORT_SYMBOL_GPL(at91_ssc_dai);
-
-/* Module information */
-MODULE_AUTHOR("Frank Mandarino, fmandarino@endrelia.com, www.endrelia.com");
-MODULE_DESCRIPTION("AT91 SSC ASoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Jan 9, 2007
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _AT91_SSC_H
-#define _AT91_SSC_H
-
-/* SSC system clock ids */
-#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
-
-/* SSC divider ids */
-#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */
-#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
-#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
-
-extern struct snd_soc_dai at91_ssc_dai[];
-
-#endif /* _AT91_SSC_H */
-
--- /dev/null
+config SND_ATMEL_SOC
+ tristate "SoC Audio for the Atmel System-on-Chip"
+ depends on ARCH_AT91 || AVR32
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the ATMEL SSC interface. You will also need
+ to select the audio interfaces to support below.
+
+config SND_ATMEL_SOC_SSC
+ tristate
+ depends on SND_ATMEL_SOC
+ help
+ Say Y or M if you want to add support for codecs the
+ ATMEL SSC interface. You will also needs to select the individual
+ machine drivers to support below.
+
+config SND_AT91_SOC_SAM9G20_WM8731
+ tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+ depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for SoC audio on WM8731-based
+ AT91sam9g20 evaluation board.
+
+config SND_AT32_SOC_PLAYPAQ
+ tristate "SoC Audio support for PlayPaq with WM8510"
+ depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8510
+ help
+ Say Y or M here if you want to add support for SoC audio
+ on the LRS PlayPaq.
+
+config SND_AT32_SOC_PLAYPAQ_SLAVE
+ bool "Run CODEC on PlayPaq in slave mode"
+ depends on SND_AT32_SOC_PLAYPAQ
+ default n
+ help
+ Say Y if you want to run with the AT32 SSC generating the BCLK
+ and FRAME signals on the PlayPaq. Unless you want to play
+ with the AT32 as the SSC master, you probably want to say N here,
+ as this will give you better sound quality.
--- /dev/null
+# AT91 Platform Support
+snd-soc-atmel-pcm-objs := atmel-pcm.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
+obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
+# AT91 Machine Support
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+
+# AT32 Machine Support
+snd-soc-playpaq-objs := playpaq_wm8510.o
+
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
--- /dev/null
+/*
+ * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/atmel_pdc.h>
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+/* TODO: These values were taken from the AT91 platform driver, check
+ * them against real values for AT32
+ */
+static const struct snd_pcm_hardware atmel_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 2,
+ .periods_max = 1024,
+ .buffer_bytes_max = 32 * 1024,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Data types
+\*--------------------------------------------------------------------------*/
+struct atmel_runtime_data {
+ struct atmel_pcm_dma_params *params;
+ dma_addr_t dma_buffer; /* physical address of dma buffer */
+ dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
+ size_t period_size;
+
+ dma_addr_t period_ptr; /* physical address of next period */
+ int periods; /* period index of period_ptr */
+
+ /* PDC register save */
+ u32 pdc_xpr_save;
+ u32 pdc_xcr_save;
+ u32 pdc_xnpr_save;
+ u32 pdc_xncr_save;
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Helper functions
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+ int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = atmel_pcm_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ pr_debug("atmel-pcm:"
+ "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
+ (void *) buf->area,
+ (void *) buf->addr,
+ size);
+
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+/*--------------------------------------------------------------------------*\
+ * ISR
+\*--------------------------------------------------------------------------*/
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+ struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ static int count;
+
+ count++;
+
+ if (ssc_sr & params->mask->ssc_endbuf) {
+ pr_warning("atmel-pcm: buffer %s on %s"
+ " (SSC_SR=%#x, count=%d)\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? "underrun" : "overrun",
+ params->name, ssc_sr, count);
+
+ /* re-start the PDC */
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ }
+
+ if (ssc_sr & params->mask->ssc_endx) {
+ /* Load the PDC next pointer and counter registers */
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+ }
+
+ snd_pcm_period_elapsed(substream);
+}
+
+
+/*--------------------------------------------------------------------------*\
+ * PCM operations
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+ /* this may get called several times by oss emulation
+ * with different params */
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ runtime->dma_bytes = params_buffer_bytes(params);
+
+ prtd->params = rtd->dai->cpu_dai->dma_data;
+ prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
+
+ prtd->dma_buffer = runtime->dma_addr;
+ prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
+ prtd->period_size = params_period_bytes(params);
+
+ pr_debug("atmel-pcm: "
+ "hw_params: DMA for %s initialized "
+ "(dma_bytes=%u, period_size=%u)\n",
+ prtd->params->name,
+ runtime->dma_bytes,
+ prtd->period_size);
+ return 0;
+}
+
+static int atmel_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ if (params != NULL) {
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->params->dma_intr_handler = NULL;
+ }
+
+ return 0;
+}
+
+static int atmel_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ ssc_writex(params->ssc->regs, SSC_IDR,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ return 0;
+}
+
+static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ struct snd_pcm_runtime *rtd = substream->runtime;
+ struct atmel_runtime_data *prtd = rtd->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ int ret = 0;
+
+ pr_debug("atmel-pcm:buffer_size = %ld,"
+ "dma_area = %p, dma_bytes = %u\n",
+ rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ prtd->period_ptr += prtd->period_size;
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ pr_debug("atmel-pcm: trigger: "
+ "period_ptr=%lx, xpr=%u, "
+ "xcr=%u, xnpr=%u, xncr=%u\n",
+ (unsigned long)prtd->period_ptr,
+ ssc_readx(params->ssc->regs, params->pdc->xpr),
+ ssc_readx(params->ssc->regs, params->pdc->xcr),
+ ssc_readx(params->ssc->regs, params->pdc->xnpr),
+ ssc_readx(params->ssc->regs, params->pdc->xncr));
+
+ ssc_writex(params->ssc->regs, SSC_IER,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_enable);
+
+ pr_debug("sr=%u imr=%u\n",
+ ssc_readx(params->ssc->regs, SSC_SR),
+ ssc_readx(params->ssc->regs, SSC_IER));
+ break; /* SNDRV_PCM_TRIGGER_START */
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ break;
+
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t atmel_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ dma_addr_t ptr;
+ snd_pcm_uframes_t x;
+
+ ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr);
+ x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
+
+ if (x == runtime->buffer_size)
+ x = 0;
+
+ return x;
+}
+
+static int atmel_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware);
+
+ /* ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ goto out;
+
+ prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL);
+ if (prtd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ runtime->private_data = prtd;
+
+ out:
+ return ret;
+}
+
+static int atmel_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+
+ kfree(prtd);
+ return 0;
+}
+
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ return remap_pfn_range(vma, vma->vm_start,
+ substream->dma_buffer.addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+struct snd_pcm_ops atmel_pcm_ops = {
+ .open = atmel_pcm_open,
+ .close = atmel_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = atmel_pcm_hw_params,
+ .hw_free = atmel_pcm_hw_free,
+ .prepare = atmel_pcm_prepare,
+ .trigger = atmel_pcm_trigger,
+ .pointer = atmel_pcm_pointer,
+ .mmap = atmel_pcm_mmap,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * ASoC platform driver
+\*--------------------------------------------------------------------------*/
+static u64 atmel_pcm_dmamask = 0xffffffff;
+
+static int atmel_pcm_new(struct snd_card *card,
+ struct snd_soc_dai *dai, struct snd_pcm *pcm)
+{
+ int ret = 0;
+
+ if (!card->dev->dma_mask)
+ card->dev->dma_mask = &atmel_pcm_dmamask;
+ if (!card->dev->coherent_dma_mask)
+ card->dev->coherent_dma_mask = 0xffffffff;
+
+ if (dai->playback.channels_min) {
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (dai->capture.channels_min) {
+ pr_debug("at32-pcm:"
+ "Allocating PCM capture DMA buffer\n");
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+ dma_free_coherent(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+#ifdef CONFIG_PM
+static int atmel_pcm_suspend(struct snd_soc_dai *dai)
+{
+ struct snd_pcm_runtime *runtime = dai->runtime;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
+
+ if (!runtime)
+ return 0;
+
+ prtd = runtime->private_data;
+ params = prtd->params;
+
+ /* disable the PDC and save the PDC registers */
+
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
+
+ prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
+ prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
+ prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr);
+ prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr);
+
+ return 0;
+}
+
+static int atmel_pcm_resume(struct snd_soc_dai *dai)
+{
+ struct snd_pcm_runtime *runtime = dai->runtime;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
+
+ if (!runtime)
+ return 0;
+
+ prtd = runtime->private_data;
+ params = prtd->params;
+
+ /* restore the PDC registers and enable the PDC */
+ ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
+ ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
+
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
+ return 0;
+}
+#else
+#define atmel_pcm_suspend NULL
+#define atmel_pcm_resume NULL
+#endif
+
+struct snd_soc_platform atmel_soc_platform = {
+ .name = "atmel-audio",
+ .pcm_ops = &atmel_pcm_ops,
+ .pcm_new = atmel_pcm_new,
+ .pcm_free = atmel_pcm_free_dma_buffers,
+ .suspend = atmel_pcm_suspend,
+ .resume = atmel_pcm_resume,
+};
+EXPORT_SYMBOL_GPL(atmel_soc_platform);
+
+static int __init atmel_pcm_modinit(void)
+{
+ return snd_soc_register_platform(&atmel_soc_platform);
+}
+module_init(atmel_pcm_modinit);
+
+static void __exit atmel_pcm_modexit(void)
+{
+ snd_soc_unregister_platform(&atmel_soc_platform);
+}
+module_exit(atmel_pcm_modexit);
+
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("Atmel PCM module");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_PCM_H
+#define _ATMEL_PCM_H
+
+#include <linux/atmel-ssc.h>
+
+/*
+ * Registers and status bits that are required by the PCM driver.
+ */
+struct atmel_pdc_regs {
+ unsigned int xpr; /* PDC recv/trans pointer */
+ unsigned int xcr; /* PDC recv/trans counter */
+ unsigned int xnpr; /* PDC next recv/trans pointer */
+ unsigned int xncr; /* PDC next recv/trans counter */
+ unsigned int ptcr; /* PDC transfer control */
+};
+
+struct atmel_ssc_mask {
+ u32 ssc_enable; /* SSC recv/trans enable */
+ u32 ssc_disable; /* SSC recv/trans disable */
+ u32 ssc_endx; /* SSC ENDTX or ENDRX */
+ u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
+ u32 pdc_enable; /* PDC recv/trans enable */
+ u32 pdc_disable; /* PDC recv/trans disable */
+};
+
+/*
+ * This structure, shared between the PCM driver and the interface,
+ * contains all information required by the PCM driver to perform the
+ * PDC DMA operation. All fields except dma_intr_handler() are initialized
+ * by the interface. The dms_intr_handler() pointer is set by the PCM
+ * driver and called by the interface SSC interrupt handler if it is
+ * non-NULL.
+ */
+struct atmel_pcm_dma_params {
+ char *name; /* stream identifier */
+ int pdc_xfer_size; /* PDC counter increment in bytes */
+ struct ssc_device *ssc; /* SSC device for stream */
+ struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */
+ struct atmel_ssc_mask *mask; /* SSC & PDC status bits */
+ struct snd_pcm_substream *substream;
+ void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
+};
+
+extern struct snd_soc_platform atmel_soc_platform;
+
+
+/*
+ * SSC register access (since ssc_writel() / ssc_readl() require literal name)
+ */
+#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
+#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
+
+#endif /* _ATMEL_PCM_H */
--- /dev/null
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#define NUM_SSC_DEVICES 1
+#else
+#define NUM_SSC_DEVICES 3
+#endif
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#if NUM_SSC_DEVICES == 3
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#endif
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#if NUM_SSC_DEVICES == 3
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#endif
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct atmel_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ u32 ssc_substream_mask;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if ((dma_params != NULL) &&
+ (dma_params->dma_intr_handler != NULL)) {
+ ssc_substream_mask = (dma_params->mask->ssc_endx |
+ dma_params->mask->ssc_endbuf);
+ if (ssc_sr & ssc_substream_mask) {
+ dma_params->dma_intr_handler(ssc_sr,
+ dma_params->
+ substream);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ int dir_mask;
+
+ pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir_mask = SSC_DIR_MASK_PLAYBACK;
+ else
+ dir_mask = SSC_DIR_MASK_CAPTURE;
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
+ (dir ? "receive" : "transmit"),
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ dma_params->ssc = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ if (ssc_p->initialized) {
+ /* Shutdown the SSC clock. */
+ pr_debug("atmel_ssc_dau: Stopping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+
+ free_irq(ssc_p->ssc->irq, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case ATMEL_SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case ATMEL_SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case ATMEL_SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ int id = rtd->dai->cpu_dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ int start_event;
+ int ret;
+
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = &ssc_dma_params[id][dir];
+ dma_params->ssc = ssc_p->ssc;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ /*
+ * The cpu_dai->dma_data field is only used to communicate the
+ * appropriate DMA parameters to the pcm driver hw_params()
+ * function. It should not be used for other purposes
+ * as it is common to all substreams.
+ */
+ rtd->dai->cpu_dai->dma_data = dma_params;
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: sample size %d"
+ "is too large for I2S\n", bits);
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated
+ * from the MCK divider, and the BCLK signal
+ * is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, (bits - 1))
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, (bits - 1))
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * I2S format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is
+ * generated from the transmit clock.
+ *
+ * For single channel data, one sample is transferred
+ * on the falling edge of the LRC clock.
+ * For two channel data, one sample is
+ * transferred on both edges of the LRC clock.
+ */
+ start_event = ((channels == 1)
+ ? SSC_START_FALLING_RF
+ : SSC_START_EDGE_RF);
+
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output
+ * on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ break;
+ }
+ pr_debug("atmel_ssc_hw_params: "
+ "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+
+ /* Enable PMC peripheral clock for this SSC */
+ pr_debug("atmel_ssc_dai: Starting clock\n");
+ clk_enable(ssc_p->ssc->clk);
+
+ /* Reset the SSC and its PDC registers */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+
+ ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+ ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: request_irq failure\n");
+ pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+
+ pr_debug("%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* Save the status register before disabling transmit and receive */
+ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+ /* Save the current interrupt mask, then disable unmasked interrupts */
+ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+ ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+ ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+ ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+ ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+ ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+ ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+ return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+ u32 cr;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* restore SSC register settings */
+ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+ ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+ ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+ /* re-enable interrupts */
+ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+ /* Re-enable recieve and transmit as appropriate */
+ cr = 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+ ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+ return 0;
+}
+#else /* CONFIG_PM */
+# define atmel_ssc_suspend NULL
+# define atmel_ssc_resume NULL
+#endif /* CONFIG_PM */
+
+
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000)
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "atmel-ssc0",
+ .id = 0,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[0],
+ },
+#if NUM_SSC_DEVICES == 3
+ { .name = "atmel-ssc1",
+ .id = 1,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[1],
+ },
+ { .name = "atmel-ssc2",
+ .id = 2,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[2],
+ },
+#endif
+};
+EXPORT_SYMBOL_GPL(atmel_ssc_dai);
+
+static int __init atmel_ssc_modinit(void)
+{
+ return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai));
+}
+module_init(atmel_ssc_modinit);
+
+static void __exit atmel_ssc_modexit(void)
+{
+ snd_soc_unregister_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai));
+}
+module_exit(atmel_ssc_modexit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_SSC_DAI_H
+#define _ATMEL_SSC_DAI_H
+
+#include <linux/types.h>
+#include <linux/atmel-ssc.h>
+
+#include "atmel-pcm.h"
+
+/* SSC system clock ids */
+#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
+
+/* SSC divider ids */
+#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */
+#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
+#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
+/*
+ * SSC direction masks
+ */
+#define SSC_DIR_MASK_UNUSED 0
+#define SSC_DIR_MASK_PLAYBACK 1
+#define SSC_DIR_MASK_CAPTURE 2
+
+/*
+ * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
+ * are expected to be used with SSC_BF
+ */
+/* START bit field values */
+#define SSC_START_CONTINUOUS 0
+#define SSC_START_TX_RX 1
+#define SSC_START_LOW_RF 2
+#define SSC_START_HIGH_RF 3
+#define SSC_START_FALLING_RF 4
+#define SSC_START_RISING_RF 5
+#define SSC_START_LEVEL_RF 6
+#define SSC_START_EDGE_RF 7
+#define SSS_START_COMPARE_0 8
+
+/* CKI bit field values */
+#define SSC_CKI_FALLING 0
+#define SSC_CKI_RISING 1
+
+/* CKO bit field values */
+#define SSC_CKO_NONE 0
+#define SSC_CKO_CONTINUOUS 1
+#define SSC_CKO_TRANSFER 2
+
+/* CKS bit field values */
+#define SSC_CKS_DIV 0
+#define SSC_CKS_CLOCK 1
+#define SSC_CKS_PIN 2
+
+/* FSEDGE bit field values */
+#define SSC_FSEDGE_POSITIVE 0
+#define SSC_FSEDGE_NEGATIVE 1
+
+/* FSOS bit field values */
+#define SSC_FSOS_NONE 0
+#define SSC_FSOS_NEGATIVE 1
+#define SSC_FSOS_POSITIVE 2
+#define SSC_FSOS_LOW 3
+#define SSC_FSOS_HIGH 4
+#define SSC_FSOS_TOGGLE 5
+
+#define START_DELAY 1
+
+struct atmel_ssc_state {
+ u32 ssc_cmr;
+ u32 ssc_rcmr;
+ u32 ssc_rfmr;
+ u32 ssc_tcmr;
+ u32 ssc_tfmr;
+ u32 ssc_sr;
+ u32 ssc_imr;
+};
+
+
+struct atmel_ssc_info {
+ char *name;
+ struct ssc_device *ssc;
+ spinlock_t lock; /* lock for dir_mask */
+ unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
+ unsigned short initialized; /* true if SSC has been initialized */
+ unsigned short daifmt;
+ unsigned short cmr_div;
+ unsigned short tcmr_period;
+ unsigned short rcmr_period;
+ struct atmel_pcm_dma_params *dma_params[2];
+ struct atmel_ssc_state ssc_state;
+};
+extern struct snd_soc_dai atmel_ssc_dai[];
+
+#endif /* _AT91_SSC_DAI_H */
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <mach/portmux.h>
#include "../codecs/wm8510.h"
-#include "at32-pcm.h"
-#include "at32-ssc.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
/*-------------------------------------------------------------------------*\
-static struct snd_soc_machine snd_soc_machine_playpaq = {
+static struct snd_soc_card snd_soc_playpaq = {
.name = "LRS_PlayPaq_WM8510",
+ .platform = &at32_soc_platform,
.dai_link = &playpaq_wm8510_dai,
.num_links = 1,
};
static struct snd_soc_device playpaq_wm8510_snd_devdata = {
- .machine = &snd_soc_machine_playpaq,
- .platform = &at32_soc_platform,
+ .card = &snd_soc_playpaq,
.codec_dev = &soc_codec_dev_wm8510,
.codec_data = &playpaq_wm8510_setup,
};
--- /dev/null
+/*
+ * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based
+ * ATMEL AT91SAM9G20ek board.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+static int at91sam9g20ek_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ int ret;
+
+ /* codec system clock is supplied by PCK0, set to 12MHz */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK,
+ 12000000, SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+
+ dev_dbg(rtd->socdev->dev, "shutdown");
+}
+
+static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct atmel_ssc_info *ssc_p = cpu_dai->private_data;
+ struct ssc_device *ssc = ssc_p->ssc;
+ int ret;
+
+ unsigned int rate;
+ int cmr_div, period;
+
+ if (ssc == NULL) {
+ printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n");
+ return -EINVAL;
+ }
+
+ /* set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /* set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The SSC clock dividers depend on the sample rate. The CMR.DIV
+ * field divides the system master clock MCK to drive the SSC TK
+ * signal which provides the codec BCLK. The TCMR.PERIOD and
+ * RCMR.PERIOD fields further divide the BCLK signal to drive
+ * the SSC TF and RF signals which provide the codec DACLRC and
+ * ADCLRC clocks.
+ *
+ * The dividers were determined through trial and error, where a
+ * CMR.DIV value is chosen such that the resulting BCLK value is
+ * divisible, or almost divisible, by (2 * sample rate), and then
+ * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1.
+ */
+ rate = params_rate(params);
+
+ switch (rate) {
+ case 8000:
+ cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */
+ period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */
+ break;
+ case 11025:
+ cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */
+ period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */
+ break;
+ case 16000:
+ cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */
+ period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */
+ break;
+ case 22050:
+ cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */
+ period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */
+ break;
+ case 32000:
+ cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */
+ period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */
+ break;
+ case 44100:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */
+ break;
+ case 48000:
+ cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */
+ period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */
+ break;
+ case 88200:
+ cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */
+ period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */
+ break;
+ case 96000:
+ cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */
+ period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */
+ break;
+ default:
+ printk(KERN_WARNING "unsupported rate %d"
+ " on at91sam9g20ek board\n", rate);
+ return -EINVAL;
+ }
+
+ /* set the MCK divider for BCLK */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div);
+ if (ret < 0)
+ return ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* set the BCLK divider for DACLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_TCMR_PERIOD, period);
+ } else {
+ /* set the BCLK divider for ADCLRC */
+ ret = snd_soc_dai_set_clkdiv(cpu_dai,
+ ATMEL_SSC_RCMR_PERIOD, period);
+ }
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops at91sam9g20ek_ops = {
+ .startup = at91sam9g20ek_startup,
+ .hw_params = at91sam9g20ek_hw_params,
+ .shutdown = at91sam9g20ek_shutdown,
+};
+
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec)
+{
+ printk(KERN_DEBUG
+ "at91sam9g20ek_wm8731 "
+ ": at91sam9g20ek_wm8731_init() called\n");
+
+ /* Add specific widgets */
+ snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets,
+ ARRAY_SIZE(at91sam9g20ek_dapm_widgets));
+ /* Set up specific audio path interconnects */
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ /* not connected */
+ snd_soc_dapm_disable_pin(codec, "RLINEIN");
+ snd_soc_dapm_disable_pin(codec, "LLINEIN");
+
+ /* always connected */
+ snd_soc_dapm_enable_pin(codec, "Int Mic");
+ snd_soc_dapm_enable_pin(codec, "Ext Spk");
+
+ snd_soc_dapm_sync(codec);
+
+ return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai = &atmel_ssc_dai[0],
+ .codec_dai = &wm8731_dai,
+ .init = at91sam9g20ek_wm8731_init,
+ .ops = &at91sam9g20ek_ops,
+};
+
+static struct snd_soc_card snd_soc_at91sam9g20ek = {
+ .name = "WM8731",
+ .platform = &atmel_soc_platform,
+ .dai_link = &at91sam9g20ek_dai,
+ .num_links = 1,
+};
+
+static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = {
+ .i2c_bus = 0,
+ .i2c_address = 0x1b,
+};
+
+static struct snd_soc_device at91sam9g20ek_snd_devdata = {
+ .card = &snd_soc_at91sam9g20ek,
+ .codec_dev = &soc_codec_dev_wm8731,
+ .codec_data = &at91sam9g20ek_wm8731_setup,
+};
+
+static struct platform_device *at91sam9g20ek_snd_device;
+
+static int __init at91sam9g20ek_init(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc = NULL;
+ int ret;
+
+ /*
+ * Request SSC device
+ */
+ ssc = ssc_request(0);
+ if (IS_ERR(ssc)) {
+ ret = PTR_ERR(ssc);
+ ssc = NULL;
+ goto err_ssc;
+ }
+ ssc_p->ssc = ssc;
+
+ at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!at91sam9g20ek_snd_device) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ ret = -ENOMEM;
+ }
+
+ platform_set_drvdata(at91sam9g20ek_snd_device,
+ &at91sam9g20ek_snd_devdata);
+ at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev;
+
+ ret = platform_device_add(at91sam9g20ek_snd_device);
+ if (ret) {
+ printk(KERN_DEBUG
+ "platform device allocation failed\n");
+ platform_device_put(at91sam9g20ek_snd_device);
+ }
+
+ return ret;
+
+err_ssc:
+ return ret;
+}
+
+static void __exit at91sam9g20ek_exit(void)
+{
+ struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data;
+ struct ssc_device *ssc;
+
+ if (ssc_p != NULL) {
+ ssc = ssc_p->ssc;
+ if (ssc != NULL)
+ ssc_free(ssc);
+ ssc_p->ssc = NULL;
+ }
+
+ platform_device_unregister(at91sam9g20ek_snd_device);
+ at91sam9g20ek_snd_device = NULL;
+}
+
+module_init(at91sam9g20ek_init);
+module_exit(at91sam9g20ek_exit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_LICENSE("GPL");
{
au1xpsc_audio_pcmdma[PCM_TX] = NULL;
au1xpsc_audio_pcmdma[PCM_RX] = NULL;
- return 0;
+ return snd_soc_register_platform(&au1xpsc_soc_platform);
}
static void __exit au1xpsc_audio_dbdma_exit(void)
{
+ snd_soc_unregister_platform(&au1xpsc_soc_platform);
}
module_init(au1xpsc_audio_dbdma_init);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
static int au1xpsc_ac97_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
}
static int au1xpsc_ac97_trigger(struct snd_pcm_substream *substream,
- int cmd)
+ int cmd, struct snd_soc_dai *dai)
{
/* FIXME */
struct au1xpsc_audio_data *pscdata = au1xpsc_ac97_workdata;
au1xpsc_ac97_workdata = NULL;
}
-static int au1xpsc_ac97_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int au1xpsc_ac97_suspend(struct snd_soc_dai *dai)
{
/* save interesting registers and disable PSC */
au1xpsc_ac97_workdata->pm[0] =
return 0;
}
-static int au1xpsc_ac97_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int au1xpsc_ac97_resume(struct snd_soc_dai *dai)
{
/* restore PSC clock config */
au_writel(au1xpsc_ac97_workdata->pm[0] | PSC_SEL_PS_AC97MODE,
struct snd_soc_dai au1xpsc_ac97_dai = {
.name = "au1xpsc_ac97",
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.probe = au1xpsc_ac97_probe,
.remove = au1xpsc_ac97_remove,
.suspend = au1xpsc_ac97_suspend,
static int __init au1xpsc_ac97_init(void)
{
au1xpsc_ac97_workdata = NULL;
- return 0;
+ return snd_soc_register_dai(&au1xpsc_ac97_dai);
}
static void __exit au1xpsc_ac97_exit(void)
{
+ snd_soc_unregister_dai(&au1xpsc_ac97_dai);
}
module_init(au1xpsc_ac97_init);
}
static int au1xpsc_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct au1xpsc_audio_data *pscdata = au1xpsc_i2s_workdata;
return 0;
}
-static int au1xpsc_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int au1xpsc_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
struct au1xpsc_audio_data *pscdata = au1xpsc_i2s_workdata;
int ret, stype = SUBSTREAM_TYPE(substream);
au1xpsc_i2s_workdata = NULL;
}
-static int au1xpsc_i2s_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
+static int au1xpsc_i2s_suspend(struct snd_soc_dai *cpu_dai)
{
/* save interesting register and disable PSC */
au1xpsc_i2s_workdata->pm[0] =
return 0;
}
-static int au1xpsc_i2s_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
+static int au1xpsc_i2s_resume(struct snd_soc_dai *cpu_dai)
{
/* select I2S mode and PSC clock */
au_writel(PSC_CTRL_DISABLE, PSC_CTRL(au1xpsc_i2s_workdata));
struct snd_soc_dai au1xpsc_i2s_dai = {
.name = "au1xpsc_i2s",
- .type = SND_SOC_DAI_I2S,
.probe = au1xpsc_i2s_probe,
.remove = au1xpsc_i2s_remove,
.suspend = au1xpsc_i2s_suspend,
.ops = {
.trigger = au1xpsc_i2s_trigger,
.hw_params = au1xpsc_i2s_hw_params,
- },
- .dai_ops = {
.set_fmt = au1xpsc_i2s_set_fmt,
},
};
static int __init au1xpsc_i2s_init(void)
{
au1xpsc_i2s_workdata = NULL;
- return 0;
+ return snd_soc_register_dai(&au1xpsc_i2s_dai);
}
static void __exit au1xpsc_i2s_exit(void)
{
+ snd_soc_unregister_dai(&au1xpsc_i2s_dai);
}
module_init(au1xpsc_i2s_init);
.ops = NULL,
};
-static struct snd_soc_machine au1xpsc_sample_ac97_machine = {
+static struct snd_soc_card au1xpsc_sample_ac97_machine = {
.name = "Au1xxx PSC AC97 Audio",
.dai_link = &au1xpsc_sample_ac97_dai,
.num_links = 1,
};
static struct snd_soc_device au1xpsc_sample_ac97_devdata = {
- .machine = &au1xpsc_sample_ac97_machine,
+ .card = &au1xpsc_sample_ac97_machine,
.platform = &au1xpsc_soc_platform, /* see dbdma2.c */
.codec_dev = &soc_codec_dev_ac97,
};
config SND_BF5XX_I2S
tristate "SoC I2S Audio for the ADI BF5xx chip"
- depends on BLACKFIN && SND_SOC
+ depends on BLACKFIN
help
Say Y or M if you want to add support for codecs attached to
the Blackfin SPORT (synchronous serial ports) interface in I2S
select SND_BF5XX_SOC_I2S
select SND_SOC_SSM2602
select I2C
- select I2C_BLACKFIN_TWI
help
Say Y if you want to add support for SoC audio on BF527-EZKIT.
config SND_BF5XX_AC97
tristate "SoC AC97 Audio for the ADI BF5xx chip"
- depends on BLACKFIN && SND_SOC
+ depends on BLACKFIN
help
Say Y or M if you want to add support for codecs attached to
the Blackfin SPORT (synchronous serial ports) interface in slot 16
properly with this driver. This driver is known to work with the
Analog Devices line of AC97 codecs.
-config SND_MMAP_SUPPORT
+config SND_BF5XX_MMAP_SUPPORT
bool "Enable MMAP Support"
depends on SND_BF5XX_AC97
default y
Say y if you want AC97 driver to support mmap mode.
We introduce an intermediate buffer to simulate mmap.
+config SND_BF5XX_MULTICHAN_SUPPORT
+ bool "Enable Multichannel Support"
+ depends on SND_BF5XX_AC97
+ default n
+ help
+ Say y if you want AC97 driver to support up to 5.1 channel audio.
+ this mode will consume much more memory for DMA.
+
config SND_BF5XX_SOC_SPORT
tristate
-
+
config SND_BF5XX_SOC_I2S
tristate
select SND_BF5XX_SOC_SPORT
int "Set a SPORT for Sound chip"
depends on (SND_BF5XX_I2S || SND_BF5XX_AC97)
range 0 3 if BF54x
- range 0 1 if (BF53x || BF561)
+ range 0 1 if !BF54x
default 0
help
Set the correct SPORT for sound chip.
depends on SND_BF5XX_AC97
default y if BFIN548_EZKIT
default n if !BFIN548_EZKIT
-
+
config SND_BF5XX_RESET_GPIO_NUM
int "Set a GPIO for cold reset"
depends on SND_BF5XX_HAVE_COLD_RESET
range 0 159
default 19 if BFIN548_EZKIT
default 5 if BFIN537_STAMP
+ default 0
help
Set the correct GPIO for RESET the sound chip.
#include "bf5xx-ac97.h"
#include "bf5xx-sport.h"
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+static unsigned int ac97_chan_mask[] = {
+ SP_FL, /* Mono */
+ SP_STEREO, /* Stereo */
+ SP_2DOT1, /* 2.1*/
+ SP_QUAD,/*Quadraquic*/
+ SP_FL | SP_FR | SP_FC | SP_SL | SP_SR,/*5 channels */
+ SP_5DOT1, /* 5.1 */
+};
+
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
static void bf5xx_mmap_copy(struct snd_pcm_substream *substream,
snd_pcm_uframes_t count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct sport_device *sport = runtime->private_data;
+ unsigned int chan_mask = ac97_chan_mask[runtime->channels - 1];
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- bf5xx_pcm_to_ac97(
- (struct ac97_frame *)sport->tx_dma_buf + sport->tx_pos,
- (__u32 *)runtime->dma_area + sport->tx_pos, count);
+ bf5xx_pcm_to_ac97((struct ac97_frame *)sport->tx_dma_buf +
+ sport->tx_pos, (__u16 *)runtime->dma_area + sport->tx_pos *
+ runtime->channels, count, chan_mask);
sport->tx_pos += runtime->period_size;
if (sport->tx_pos >= runtime->buffer_size)
sport->tx_pos %= runtime->buffer_size;
sport->tx_delay_pos = sport->tx_pos;
} else {
- bf5xx_ac97_to_pcm(
- (struct ac97_frame *)sport->rx_dma_buf + sport->rx_pos,
- (__u32 *)runtime->dma_area + sport->rx_pos, count);
+ bf5xx_ac97_to_pcm((struct ac97_frame *)sport->rx_dma_buf +
+ sport->rx_pos, (__u16 *)runtime->dma_area + sport->rx_pos *
+ runtime->channels, count);
sport->rx_pos += runtime->period_size;
if (sport->rx_pos >= runtime->buffer_size)
sport->rx_pos %= runtime->buffer_size;
static void bf5xx_dma_irq(void *data)
{
struct snd_pcm_substream *pcm = data;
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
struct snd_pcm_runtime *runtime = pcm->runtime;
struct sport_device *sport = runtime->private_data;
bf5xx_mmap_copy(pcm, runtime->period_size);
* The total rx/tx buffer is for ac97 frame to hold all pcm data
* is 0x20000 * sizeof(struct ac97_frame) / 4.
*/
-#ifdef CONFIG_SND_MMAP_SUPPORT
static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_BLOCK_TRANSFER,
-#else
-static const struct snd_pcm_hardware bf5xx_pcm_hardware = {
- .info = SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER,
#endif
+ SNDRV_PCM_INFO_BLOCK_TRANSFER,
+
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.period_bytes_min = 32,
.period_bytes_max = 0x10000,
static int bf5xx_pcm_hw_free(struct snd_pcm_substream *substream)
{
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
struct snd_pcm_runtime *runtime = substream->runtime;
+ struct sport_device *sport = runtime->private_data;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- memset(runtime->dma_area, 0, runtime->buffer_size);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ sport->once = 0;
+ if (runtime->dma_area)
+ memset(runtime->dma_area, 0, runtime->buffer_size);
+ memset(sport->tx_dma_buf, 0, runtime->buffer_size *
+ sizeof(struct ac97_frame));
+ } else
+ memset(sport->rx_dma_buf, 0, runtime->buffer_size *
+ sizeof(struct ac97_frame));
+#endif
snd_pcm_lib_free_pages(substream);
return 0;
}
/* An intermediate buffer is introduced for implementing mmap for
* SPORT working in TMD mode(include AC97).
*/
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
sport_set_tx_callback(sport, bf5xx_dma_irq, substream);
sport_config_tx_dma(sport, sport->tx_dma_buf, runtime->periods,
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
bf5xx_mmap_copy(substream, runtime->period_size);
- snd_pcm_period_elapsed(substream);
sport->tx_delay_pos = 0;
+#endif
sport_tx_start(sport);
- }
- else
+ } else
sport_rx_start(sport);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
sport->tx_pos = 0;
#endif
sport_tx_stop(sport);
} else {
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
sport->rx_pos = 0;
#endif
sport_rx_stop(sport);
struct sport_device *sport = runtime->private_data;
unsigned int curr;
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
curr = sport->tx_delay_pos;
else
return ret;
}
-static int bf5xx_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct sport_device *sport = runtime->private_data;
-
- pr_debug("%s enter\n", __func__);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- sport->once = 0;
- memset(sport->tx_dma_buf, 0, runtime->buffer_size * sizeof(struct ac97_frame));
- } else
- memset(sport->rx_dma_buf, 0, runtime->buffer_size * sizeof(struct ac97_frame));
-
- return 0;
-}
-
-#ifdef CONFIG_SND_MMAP_SUPPORT
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
static int bf5xx_pcm_mmap(struct snd_pcm_substream *substream,
struct vm_area_struct *vma)
{
void __user *buf, snd_pcm_uframes_t count)
{
struct snd_pcm_runtime *runtime = substream->runtime;
-
+ unsigned int chan_mask = ac97_chan_mask[runtime->channels - 1];
pr_debug("%s copy pos:0x%lx count:0x%lx\n",
substream->stream ? "Capture" : "Playback", pos, count);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- bf5xx_pcm_to_ac97(
- (struct ac97_frame *)runtime->dma_area + pos,
- buf, count);
+ bf5xx_pcm_to_ac97((struct ac97_frame *)runtime->dma_area + pos,
+ (__u16 *)buf, count, chan_mask);
else
- bf5xx_ac97_to_pcm(
- (struct ac97_frame *)runtime->dma_area + pos,
- buf, count);
+ bf5xx_ac97_to_pcm((struct ac97_frame *)runtime->dma_area + pos,
+ (__u16 *)buf, count);
return 0;
}
#endif
struct snd_pcm_ops bf5xx_pcm_ac97_ops = {
.open = bf5xx_pcm_open,
- .close = bf5xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = bf5xx_pcm_hw_params,
.hw_free = bf5xx_pcm_hw_free,
.prepare = bf5xx_pcm_prepare,
.trigger = bf5xx_pcm_trigger,
.pointer = bf5xx_pcm_pointer,
-#ifdef CONFIG_SND_MMAP_SUPPORT
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
.mmap = bf5xx_pcm_mmap,
#else
.copy = bf5xx_pcm_copy,
* Need to allocate local buffer when enable
* MMAP for SPORT working in TMD mode (include AC97).
*/
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (!sport_handle->tx_dma_buf) {
sport_handle->tx_dma_buf = dma_alloc_coherent(NULL, \
struct snd_pcm_substream *substream;
struct snd_dma_buffer *buf;
int stream;
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
size_t size = bf5xx_pcm_hardware.buffer_bytes_max *
sizeof(struct ac97_frame) / 4;
#endif
continue;
dma_free_coherent(NULL, buf->bytes, buf->area, 0);
buf->area = NULL;
-#if defined(CONFIG_SND_MMAP_SUPPORT)
+#if defined(CONFIG_SND_BF5XX_MMAP_SUPPORT)
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (sport_handle->tx_dma_buf)
dma_free_coherent(NULL, size, \
};
EXPORT_SYMBOL_GPL(bf5xx_ac97_soc_platform);
+static int __init bfin_ac97_init(void)
+{
+ return snd_soc_register_platform(&bf5xx_ac97_soc_platform);
+}
+module_init(bfin_ac97_init);
+
+static void __exit bfin_ac97_exit(void)
+{
+ snd_soc_unregister_platform(&bf5xx_ac97_soc_platform);
+}
+module_exit(bfin_ac97_exit);
+
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("ADI Blackfin AC97 PCM DMA module");
MODULE_LICENSE("GPL");
static int *cmd_count;
static int sport_num = CONFIG_SND_BF5XX_SPORT_NUM;
-#if defined(CONFIG_BF54x)
+static u16 sport_req[][7] = {
+ PIN_REQ_SPORT_0,
+#ifdef PIN_REQ_SPORT_1
+ PIN_REQ_SPORT_1,
+#endif
+#ifdef PIN_REQ_SPORT_2
+ PIN_REQ_SPORT_2,
+#endif
+#ifdef PIN_REQ_SPORT_3
+ PIN_REQ_SPORT_3,
+#endif
+ };
+
static struct sport_param sport_params[4] = {
{
.dma_rx_chan = CH_SPORT0_RX,
.dma_tx_chan = CH_SPORT0_TX,
- .err_irq = IRQ_SPORT0_ERR,
+ .err_irq = IRQ_SPORT0_ERROR,
.regs = (struct sport_register *)SPORT0_TCR1,
},
+#ifdef PIN_REQ_SPORT_1
{
.dma_rx_chan = CH_SPORT1_RX,
.dma_tx_chan = CH_SPORT1_TX,
- .err_irq = IRQ_SPORT1_ERR,
+ .err_irq = IRQ_SPORT1_ERROR,
.regs = (struct sport_register *)SPORT1_TCR1,
},
+#endif
+#ifdef PIN_REQ_SPORT_2
{
.dma_rx_chan = CH_SPORT2_RX,
.dma_tx_chan = CH_SPORT2_TX,
- .err_irq = IRQ_SPORT2_ERR,
+ .err_irq = IRQ_SPORT2_ERROR,
.regs = (struct sport_register *)SPORT2_TCR1,
},
+#endif
+#ifdef PIN_REQ_SPORT_3
{
.dma_rx_chan = CH_SPORT3_RX,
.dma_tx_chan = CH_SPORT3_TX,
- .err_irq = IRQ_SPORT3_ERR,
+ .err_irq = IRQ_SPORT3_ERROR,
.regs = (struct sport_register *)SPORT3_TCR1,
}
-};
-#else
-static struct sport_param sport_params[2] = {
- {
- .dma_rx_chan = CH_SPORT0_RX,
- .dma_tx_chan = CH_SPORT0_TX,
- .err_irq = IRQ_SPORT0_ERROR,
- .regs = (struct sport_register *)SPORT0_TCR1,
- },
- {
- .dma_rx_chan = CH_SPORT1_RX,
- .dma_tx_chan = CH_SPORT1_TX,
- .err_irq = IRQ_SPORT1_ERROR,
- .regs = (struct sport_register *)SPORT1_TCR1,
- }
-};
#endif
+};
-void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u32 *src, \
- size_t count)
+void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src,
+ size_t count, unsigned int chan_mask)
{
while (count--) {
- dst->ac97_tag = TAG_VALID | TAG_PCM;
- (dst++)->ac97_pcm = *src++;
+ dst->ac97_tag = TAG_VALID;
+ if (chan_mask & SP_FL) {
+ dst->ac97_pcm_r = *src++;
+ dst->ac97_tag |= TAG_PCM_RIGHT;
+ }
+ if (chan_mask & SP_FR) {
+ dst->ac97_pcm_l = *src++;
+ dst->ac97_tag |= TAG_PCM_LEFT;
+
+ }
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+ if (chan_mask & SP_SR) {
+ dst->ac97_sl = *src++;
+ dst->ac97_tag |= TAG_PCM_SL;
+ }
+ if (chan_mask & SP_SL) {
+ dst->ac97_sr = *src++;
+ dst->ac97_tag |= TAG_PCM_SR;
+ }
+ if (chan_mask & SP_LFE) {
+ dst->ac97_lfe = *src++;
+ dst->ac97_tag |= TAG_PCM_LFE;
+ }
+ if (chan_mask & SP_FC) {
+ dst->ac97_center = *src++;
+ dst->ac97_tag |= TAG_PCM_CENTER;
+ }
+#endif
+ dst++;
}
}
EXPORT_SYMBOL(bf5xx_pcm_to_ac97);
-void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u32 *dst, \
+void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst,
size_t count)
{
- while (count--)
- *(dst++) = (src++)->ac97_pcm;
+ while (count--) {
+ *(dst++) = src->ac97_pcm_l;
+ *(dst++) = src->ac97_pcm_r;
+ src++;
+ }
}
EXPORT_SYMBOL(bf5xx_ac97_to_pcm);
static unsigned int sport_tx_curr_frag(struct sport_device *sport)
{
- return sport->tx_curr_frag = sport_curr_offset_tx(sport) / \
+ return sport->tx_curr_frag = sport_curr_offset_tx(sport) /
sport->tx_fragsize;
}
sport_incfrag(sport, &nextfrag, 1);
- nextwrite = (struct ac97_frame *)(sport->tx_buf + \
+ nextwrite = (struct ac97_frame *)(sport->tx_buf +
nextfrag * sport->tx_fragsize);
pr_debug("sport->tx_buf:%p, nextfrag:0x%x nextwrite:%p, cmd_count:%d\n",
sport->tx_buf, nextfrag, nextwrite, cmd_count[nextfrag]);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
#ifdef CONFIG_PM
-static int bf5xx_ac97_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int bf5xx_ac97_suspend(struct snd_soc_dai *dai)
{
struct sport_device *sport =
(struct sport_device *)dai->private_data;
return 0;
}
-static int bf5xx_ac97_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int bf5xx_ac97_resume(struct snd_soc_dai *dai)
{
int ret;
struct sport_device *sport =
static int bf5xx_ac97_probe(struct platform_device *pdev,
struct snd_soc_dai *dai)
{
- int ret;
-#if defined(CONFIG_BF54x)
- u16 sport_req[][7] = {PIN_REQ_SPORT_0, PIN_REQ_SPORT_1,
- PIN_REQ_SPORT_2, PIN_REQ_SPORT_3};
-#else
- u16 sport_req[][7] = {PIN_REQ_SPORT_0, PIN_REQ_SPORT_1};
-#endif
+ int ret = 0;
cmd_count = (int *)get_zeroed_page(GFP_KERNEL);
if (cmd_count == NULL)
return -ENOMEM;
if (peripheral_request_list(&sport_req[sport_num][0], "soc-audio")) {
pr_err("Requesting Peripherals failed\n");
- return -EFAULT;
+ ret = -EFAULT;
+ goto peripheral_err;
}
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
if (gpio_request(CONFIG_SND_BF5XX_RESET_GPIO_NUM, "SND_AD198x RESET")) {
pr_err("Failed to request GPIO_%d for reset\n",
CONFIG_SND_BF5XX_RESET_GPIO_NUM);
- peripheral_free_list(&sport_req[sport_num][0]);
- return -1;
+ ret = -1;
+ goto gpio_err;
}
gpio_direction_output(CONFIG_SND_BF5XX_RESET_GPIO_NUM, 1);
#endif
sport_handle = sport_init(&sport_params[sport_num], 2, \
sizeof(struct ac97_frame), NULL);
if (!sport_handle) {
- peripheral_free_list(&sport_req[sport_num][0]);
-#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
- gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
-#endif
- return -ENODEV;
+ ret = -ENODEV;
+ goto sport_err;
}
/*SPORT works in TDM mode to simulate AC97 transfers*/
ret = sport_set_multichannel(sport_handle, 16, 0x1F, 1);
if (ret) {
pr_err("SPORT is busy!\n");
- kfree(sport_handle);
- peripheral_free_list(&sport_req[sport_num][0]);
-#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
- gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
-#endif
- return -EBUSY;
+ ret = -EBUSY;
+ goto sport_config_err;
}
ret = sport_config_rx(sport_handle, IRFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
- kfree(sport_handle);
- peripheral_free_list(&sport_req[sport_num][0]);
-#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
- gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
-#endif
- return -EBUSY;
+ ret = -EBUSY;
+ goto sport_config_err;
}
ret = sport_config_tx(sport_handle, ITFS, 0xF, 0, (16*16-1));
if (ret) {
pr_err("SPORT is busy!\n");
- kfree(sport_handle);
- peripheral_free_list(&sport_req[sport_num][0]);
-#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
- gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
-#endif
- return -EBUSY;
+ ret = -EBUSY;
+ goto sport_config_err;
}
+
return 0;
+
+sport_config_err:
+ kfree(sport_handle);
+sport_err:
+#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
+ gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
+#endif
+gpio_err:
+ peripheral_free_list(&sport_req[sport_num][0]);
+peripheral_err:
+ free_page((unsigned long)cmd_count);
+ cmd_count = NULL;
+
+ return ret;
}
static void bf5xx_ac97_remove(struct platform_device *pdev,
{
free_page((unsigned long)cmd_count);
cmd_count = NULL;
+ peripheral_free_list(&sport_req[sport_num][0]);
#ifdef CONFIG_SND_BF5XX_HAVE_COLD_RESET
gpio_free(CONFIG_SND_BF5XX_RESET_GPIO_NUM);
#endif
struct snd_soc_dai bfin_ac97_dai = {
.name = "bf5xx-ac97",
.id = 0,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.probe = bf5xx_ac97_probe,
.remove = bf5xx_ac97_remove,
.suspend = bf5xx_ac97_suspend,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+ .channels_max = 6,
+#else
.channels_max = 2,
+#endif
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
.capture = {
};
EXPORT_SYMBOL_GPL(bfin_ac97_dai);
+static int __init bfin_ac97_init(void)
+{
+ return snd_soc_register_dai(&bfin_ac97_dai);
+}
+module_init(bfin_ac97_init);
+
+static void __exit bfin_ac97_exit(void)
+{
+ snd_soc_unregister_dai(&bfin_ac97_dai);
+}
+module_exit(bfin_ac97_exit);
+
MODULE_AUTHOR("Roy Huang");
MODULE_DESCRIPTION("AC97 driver for ADI Blackfin");
MODULE_LICENSE("GPL");
u16 ac97_tag; /* slot 0 */
u16 ac97_addr; /* slot 1 */
u16 ac97_data; /* slot 2 */
- u32 ac97_pcm; /* slot 3 and 4: left and right pcm data */
+ u16 ac97_pcm_l; /*slot 3:front left*/
+ u16 ac97_pcm_r; /*slot 4:front left*/
+#if defined(CONFIG_SND_BF5XX_MULTICHAN_SUPPORT)
+ u16 ac97_mdm_l1;
+ u16 ac97_center; /*slot 6:center*/
+ u16 ac97_sl; /*slot 7:surround left*/
+ u16 ac97_sr; /*slot 8:surround right*/
+ u16 ac97_lfe; /*slot 9:lfe*/
+#endif
} __attribute__ ((packed));
+/* Speaker location */
+#define SP_FL 0x0001
+#define SP_FR 0x0010
+#define SP_FC 0x0002
+#define SP_LFE 0x0020
+#define SP_SL 0x0004
+#define SP_SR 0x0040
+
+#define SP_STEREO (SP_FL | SP_FR)
+#define SP_2DOT1 (SP_FL | SP_FR | SP_LFE)
+#define SP_QUAD (SP_FL | SP_FR | SP_SL | SP_SR)
+#define SP_5DOT1 (SP_FL | SP_FR | SP_FC | SP_LFE | SP_SL | SP_SR)
+
#define TAG_VALID 0x8000
#define TAG_CMD 0x6000
#define TAG_PCM_LEFT 0x1000
#define TAG_PCM_RIGHT 0x0800
-#define TAG_PCM (TAG_PCM_LEFT | TAG_PCM_RIGHT)
+#define TAG_PCM_MDM_L1 0x0400
+#define TAG_PCM_CENTER 0x0200
+#define TAG_PCM_SL 0x0100
+#define TAG_PCM_SR 0x0080
+#define TAG_PCM_LFE 0x0040
extern struct snd_soc_dai bfin_ac97_dai;
-void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u32 *src, \
- size_t count);
+void bf5xx_pcm_to_ac97(struct ac97_frame *dst, const __u16 *src, \
+ size_t count, unsigned int chan_mask);
-void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u32 *dst, \
+void bf5xx_ac97_to_pcm(const struct ac97_frame *src, __u16 *dst, \
size_t count);
#endif
#include "bf5xx-ac97-pcm.h"
#include "bf5xx-ac97.h"
-static struct snd_soc_machine bf5xx_board;
+static struct snd_soc_card bf5xx_board;
static int bf5xx_board_startup(struct snd_pcm_substream *substream)
{
.ops = &bf5xx_board_ops,
};
-static struct snd_soc_machine bf5xx_board = {
+static struct snd_soc_card bf5xx_board = {
.name = "bf5xx-board",
+ .platform = &bf5xx_ac97_soc_platform,
.dai_link = &bf5xx_board_dai,
.num_links = 1,
};
static struct snd_soc_device bf5xx_board_snd_devdata = {
- .machine = &bf5xx_board,
- .platform = &bf5xx_ac97_soc_platform,
+ .card = &bf5xx_board,
.codec_dev = &soc_codec_dev_ad1980,
};
#define GPIO_SE CONFIG_SND_BFIN_AD73311_SE
-static struct snd_soc_machine bf5xx_ad73311;
+static struct snd_soc_card bf5xx_ad73311;
static int snd_ad73311_startup(void)
{
params_format(params));
/* set cpu DAI configuration */
- ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_A |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
.ops = &bf5xx_ad73311_ops,
};
-static struct snd_soc_machine bf5xx_ad73311 = {
+static struct snd_soc_card bf5xx_ad73311 = {
.name = "bf5xx_ad73311",
+ .platform = &bf5xx_i2s_soc_platform,
.probe = bf5xx_probe,
.dai_link = &bf5xx_ad73311_dai,
.num_links = 1,
};
static struct snd_soc_device bf5xx_ad73311_snd_devdata = {
- .machine = &bf5xx_ad73311,
- .platform = &bf5xx_i2s_soc_platform,
+ .card = &bf5xx_ad73311,
.codec_dev = &soc_codec_dev_ad73311,
};
};
EXPORT_SYMBOL_GPL(bf5xx_i2s_soc_platform);
+static int __init bfin_i2s_init(void)
+{
+ return snd_soc_register_platform(&bf5xx_i2s_soc_platform);
+}
+module_init(bfin_i2s_init);
+
+static void __exit bfin_i2s_exit(void)
+{
+ snd_soc_unregister_platform(&bf5xx_i2s_soc_platform);
+}
+module_exit(bfin_i2s_exit);
+
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("ADI Blackfin I2S PCM DMA module");
MODULE_LICENSE("GPL");
return ret;
}
-static int bf5xx_i2s_startup(struct snd_pcm_substream *substream)
+static int bf5xx_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
}
static int bf5xx_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
int ret = 0;
return 0;
}
-static void bf5xx_i2s_shutdown(struct snd_pcm_substream *substream)
+static void bf5xx_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
bf5xx_i2s.counter--;
return 0;
}
-static void bf5xx_i2s_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static void bf5xx_i2s_remove(struct snd_soc_dai *dai)
{
pr_debug("%s enter\n", __func__);
peripheral_free_list(&sport_req[sport_num][0]);
}
#ifdef CONFIG_PM
-static int bf5xx_i2s_suspend(struct platform_device *dev,
- struct snd_soc_dai *dai)
+static int bf5xx_i2s_suspend(struct snd_soc_dai *dai)
{
struct sport_device *sport =
(struct sport_device *)dai->private_data;
struct snd_soc_dai bf5xx_i2s_dai = {
.name = "bf5xx-i2s",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.probe = bf5xx_i2s_probe,
.remove = bf5xx_i2s_remove,
.suspend = bf5xx_i2s_suspend,
.ops = {
.startup = bf5xx_i2s_startup,
.shutdown = bf5xx_i2s_shutdown,
- .hw_params = bf5xx_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = bf5xx_i2s_hw_params,
.set_fmt = bf5xx_i2s_set_dai_fmt,
},
};
EXPORT_SYMBOL_GPL(bf5xx_i2s_dai);
+static int __init bfin_i2s_init(void)
+{
+ return snd_soc_register_dai(&bf5xx_i2s_dai);
+}
+module_init(bfin_i2s_init);
+
+static void __exit bfin_i2s_exit(void)
+{
+ snd_soc_unregister_dai(&bf5xx_i2s_dai);
+}
+module_exit(bfin_i2s_exit);
+
/* Module information */
MODULE_AUTHOR("Cliff Cai");
MODULE_DESCRIPTION("I2S driver for ADI Blackfin");
void *err_data;
unsigned char *tx_dma_buf;
unsigned char *rx_dma_buf;
-#ifdef CONFIG_SND_MMAP_SUPPORT
+#ifdef CONFIG_SND_BF5XX_MMAP_SUPPORT
dma_addr_t tx_dma_phy;
dma_addr_t rx_dma_phy;
int tx_pos;/*pcm sample count*/
#include "bf5xx-i2s-pcm.h"
#include "bf5xx-i2s.h"
-static struct snd_soc_machine bf5xx_ssm2602;
+static struct snd_soc_card bf5xx_ssm2602;
static int bf5xx_ssm2602_startup(struct snd_pcm_substream *substream)
{
*/
/* set codec DAI configuration */
- ret = codec_dai->dai_ops.set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
- ret = cpu_dai->dai_ops.set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);
if (ret < 0)
return ret;
- ret = codec_dai->dai_ops.set_sysclk(codec_dai, SSM2602_SYSCLK, clk,
+ ret = snd_soc_dai_set_sysclk(codec_dai, SSM2602_SYSCLK, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
.i2c_address = 0x1b,
};
-static struct snd_soc_machine bf5xx_ssm2602 = {
+static struct snd_soc_card bf5xx_ssm2602 = {
.name = "bf5xx_ssm2602",
+ .platform = &bf5xx_i2s_soc_platform,
.dai_link = &bf5xx_ssm2602_dai,
.num_links = 1,
};
static struct snd_soc_device bf5xx_ssm2602_snd_devdata = {
- .machine = &bf5xx_ssm2602,
- .platform = &bf5xx_i2s_soc_platform,
+ .card = &bf5xx_ssm2602,
.codec_dev = &soc_codec_dev_ssm2602,
.codec_data = &bf5xx_ssm2602_setup,
};
config SND_SOC_ALL_CODECS
tristate "Build all ASoC CODEC drivers"
- depends on I2C
- select SPI
- select SPI_MASTER
- select SND_SOC_AD73311
- select SND_SOC_AK4535
- select SND_SOC_CS4270
- select SND_SOC_SSM2602
- select SND_SOC_TLV320AIC23
- select SND_SOC_TLV320AIC26
- select SND_SOC_TLV320AIC3X
- select SND_SOC_UDA1380
- select SND_SOC_WM8510
- select SND_SOC_WM8580
- select SND_SOC_WM8731
- select SND_SOC_WM8750
- select SND_SOC_WM8753
- select SND_SOC_WM8900
- select SND_SOC_WM8903
- select SND_SOC_WM8971
- select SND_SOC_WM8990
+ select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS
+ select SND_SOC_AD1980 if SND_SOC_AC97_BUS
+ select SND_SOC_AD73311 if I2C
+ select SND_SOC_AK4535 if I2C
+ select SND_SOC_CS4270 if I2C
+ select SND_SOC_PCM3008
+ select SND_SOC_SSM2602 if I2C
+ select SND_SOC_TLV320AIC23 if I2C
+ select SND_SOC_TLV320AIC26 if SPI_MASTER
+ select SND_SOC_TLV320AIC3X if I2C
+ select SND_SOC_TWL4030 if TWL4030_CORE
+ select SND_SOC_UDA134X
+ select SND_SOC_UDA1380 if I2C
+ select SND_SOC_WM8350 if MFD_WM8350
+ select SND_SOC_WM8510 if (I2C || SPI_MASTER)
+ select SND_SOC_WM8580 if I2C
+ select SND_SOC_WM8728 if (I2C || SPI_MASTER)
+ select SND_SOC_WM8731 if (I2C || SPI_MASTER)
+ select SND_SOC_WM8750 if (I2C || SPI_MASTER)
+ select SND_SOC_WM8753 if (I2C || SPI_MASTER)
+ select SND_SOC_WM8900 if I2C
+ select SND_SOC_WM8903 if I2C
+ select SND_SOC_WM8971 if I2C
+ select SND_SOC_WM8990 if I2C
+ select SND_SOC_WM9712 if SND_SOC_AC97_BUS
+ select SND_SOC_WM9713 if SND_SOC_AC97_BUS
help
Normally ASoC codec drivers are only built if a machine driver which
uses them is also built since they are only usable with a machine
driver. Selecting this option will allow these drivers to be built
without an explicit machine driver for test and development purposes.
+ Support for the bus types used to access the codecs to be built must
+ be selected separately.
+
If unsure select "N".
bool
depends on SND_SOC_CS4270
+config SND_SOC_L3
+ tristate
+
+config SND_SOC_PCM3008
+ tristate
+
config SND_SOC_SSM2602
tristate
tristate
depends on I2C
+config SND_SOC_TWL4030
+ tristate
+ depends on TWL4030_CORE
+
+config SND_SOC_UDA134X
+ tristate
+ select SND_SOC_L3
+
config SND_SOC_UDA1380
tristate
+config SND_SOC_WM8350
+ tristate
+
config SND_SOC_WM8510
tristate
config SND_SOC_WM8580
tristate
+config SND_SOC_WM8728
+ tristate
+
config SND_SOC_WM8731
tristate
snd-soc-ad73311-objs := ad73311.o
snd-soc-ak4535-objs := ak4535.o
snd-soc-cs4270-objs := cs4270.o
+snd-soc-l3-objs := l3.o
+snd-soc-pcm3008-objs := pcm3008.o
snd-soc-ssm2602-objs := ssm2602.o
snd-soc-tlv320aic23-objs := tlv320aic23.o
snd-soc-tlv320aic26-objs := tlv320aic26.o
snd-soc-tlv320aic3x-objs := tlv320aic3x.o
+snd-soc-twl4030-objs := twl4030.o
+snd-soc-uda134x-objs := uda134x.o
snd-soc-uda1380-objs := uda1380.o
+snd-soc-wm8350-objs := wm8350.o
snd-soc-wm8510-objs := wm8510.o
snd-soc-wm8580-objs := wm8580.o
+snd-soc-wm8728-objs := wm8728.o
snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8750-objs := wm8750.o
snd-soc-wm8753-objs := wm8753.o
obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
obj-$(CONFIG_SND_SOC_AK4535) += snd-soc-ak4535.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o
+obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o
obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o
obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o
obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o
obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o
+obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o
+obj-$(CONFIG_SND_SOC_UDA134X) += snd-soc-uda134x.o
obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o
+obj-$(CONFIG_SND_SOC_WM8350) += snd-soc-wm8350.o
obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o
obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o
+obj-$(CONFIG_SND_SOC_WM8728) += snd-soc-wm8728.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
#define AC97_VERSION "0.6"
-static int ac97_prepare(struct snd_pcm_substream *substream)
+static int ac97_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai ac97_dai = {
.name = "AC97 HiFi",
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 1,
if (ret < 0)
goto bus_err;
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0)
goto bus_err;
return 0;
SOC_DOUBLE("Surround Playback Volume", AC97_SURROUND_MASTER, 8, 0, 31, 1),
SOC_DOUBLE("Surround Playback Switch", AC97_SURROUND_MASTER, 15, 7, 1, 1),
+SOC_DOUBLE("Center/LFE Playback Volume", AC97_CENTER_LFE_MASTER, 8, 0, 31, 1),
+SOC_DOUBLE("Center/LFE Playback Switch", AC97_CENTER_LFE_MASTER, 15, 7, 1, 1),
+
SOC_ENUM("Capture Source", ad1980_cap_src),
SOC_SINGLE("Mic Boost Switch", AC97_MIC, 6, 1, 0),
struct snd_soc_dai ad1980_dai = {
.name = "AC97",
+ .ac97_control = 1,
.playback = {
.stream_name = "Playback",
.channels_min = 2,
- .channels_max = 2,
+ .channels_max = 6,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE, },
.capture = {
struct snd_soc_codec *codec;
int ret = 0;
u16 vendor_id2;
+ u16 ext_status;
printk(KERN_INFO "AD1980 SoC Audio Codec\n");
ret = ad1980_reset(codec, 0);
if (ret < 0) {
- printk(KERN_ERR "AC97 link error\n");
+ printk(KERN_ERR "Failed to reset AD1980: AC97 link error\n");
goto reset_err;
}
"supported\n");
}
- ac97_write(codec, AC97_MASTER, 0x0000); /* unmute line out volume */
- ac97_write(codec, AC97_PCM, 0x0000); /* unmute PCM out volume */
- ac97_write(codec, AC97_REC_GAIN, 0x0000);/* unmute record volume */
+ /* unmute captures and playbacks volume */
+ ac97_write(codec, AC97_MASTER, 0x0000);
+ ac97_write(codec, AC97_PCM, 0x0000);
+ ac97_write(codec, AC97_REC_GAIN, 0x0000);
+ ac97_write(codec, AC97_CENTER_LFE_MASTER, 0x0000);
+ ac97_write(codec, AC97_SURROUND_MASTER, 0x0000);
+
+ /*power on LFE/CENTER/Surround DACs*/
+ ext_status = ac97_read(codec, AC97_EXTENDED_STATUS);
+ ac97_write(codec, AC97_EXTENDED_STATUS, ext_status&~0x3800);
ad1980_add_controls(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "ad1980: failed to register card\n");
goto reset_err;
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
- * Revision history
- * 25th Sep 2008 Initial version.
*/
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <sound/core.h>
goto pcm_err;
}
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "ad73311: failed to register card\n");
goto register_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ad73311);
+static int __init ad73311_init(void)
+{
+ return snd_soc_register_dai(&ad73311_dai);
+}
+module_init(ad73311_init);
+
+static void __exit ad73311_exit(void)
+{
+ snd_soc_unregister_dai(&ad73311_dai);
+}
+module_exit(ad73311_exit);
+
MODULE_DESCRIPTION("ASoC ad73311 driver");
MODULE_AUTHOR("Cliff Cai ");
MODULE_LICENSE("GPL");
}
static int ak4535_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
.hw_params = ak4535_hw_params,
- },
- .dai_ops = {
.set_fmt = ak4535_set_dai_fmt,
.digital_mute = ak4535_mute,
.set_sysclk = ak4535_set_dai_sysclk,
ak4535_add_controls(codec);
ak4535_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "ak4535: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ak4535);
+static int __init ak4535_modinit(void)
+{
+ return snd_soc_register_dai(&ak4535_dai);
+}
+module_init(ak4535_modinit);
+
+static void __exit ak4535_exit(void)
+{
+ snd_soc_unregister_dai(&ak4535_dai);
+}
+module_exit(ak4535_exit);
+
MODULE_DESCRIPTION("Soc AK4535 driver");
MODULE_AUTHOR("Richard Purdie");
MODULE_LICENSE("GPL");
/*
* Program the CS4270 with the given hardware parameters.
*
- * The .dai_ops functions are used to provide board-specific data, like
+ * The .ops functions are used to provide board-specific data, like
* input frequencies, to this driver. This function takes that information,
* combines it with the hardware parameters provided, and programs the
* hardware accordingly.
*/
static int cs4270_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return ret;
}
+ /* Disable automatic volume control. It's enabled by default, and
+ * it causes volume change commands to be delayed, sometimes until
+ * after playback has started.
+ */
+
+ reg = cs4270_read_reg_cache(codec, CS4270_TRANS);
+ reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO);
+ ret = cs4270_i2c_write(codec, CS4270_TRANS, reg);
+ if (ret < 0) {
+ printk(KERN_ERR "I2C write failed\n");
+ return ret;
+ }
+
/* Thaw and power-up the codec */
ret = snd_soc_write(codec, CS4270_PWRCTL, 0);
if (codec->control_data) {
/* Initialize codec ops */
cs4270_dai.ops.hw_params = cs4270_hw_params;
- cs4270_dai.dai_ops.set_sysclk = cs4270_set_dai_sysclk;
- cs4270_dai.dai_ops.set_fmt = cs4270_set_dai_fmt;
+ cs4270_dai.ops.set_sysclk = cs4270_set_dai_sysclk;
+ cs4270_dai.ops.set_fmt = cs4270_set_dai_fmt;
#ifdef CONFIG_SND_SOC_CS4270_HWMUTE
- cs4270_dai.dai_ops.digital_mute = cs4270_mute;
+ cs4270_dai.ops.digital_mute = cs4270_mute;
#endif
} else
printk(KERN_INFO "cs4270: no I2C device found, "
printk(KERN_INFO "cs4270: I2C disabled, using stand-alone mode\n");
#endif
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to register card\n");
goto error_del_driver;
};
EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
+static int __init cs4270_init(void)
+{
+ return snd_soc_register_dai(&cs4270_dai);
+}
+module_init(cs4270_init);
+
+static void __exit cs4270_exit(void)
+{
+ snd_soc_unregister_dai(&cs4270_dai);
+}
+module_exit(cs4270_exit);
+
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_DESCRIPTION("Cirrus Logic CS4270 ALSA SoC Codec Driver");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * L3 code
+ *
+ * Copyright (C) 2008, Christian Pellegrin <chripell@evolware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * based on:
+ *
+ * L3 bus algorithm module.
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <sound/l3.h>
+
+/*
+ * Send one byte of data to the chip. Data is latched into the chip on
+ * the rising edge of the clock.
+ */
+static void sendbyte(struct l3_pins *adap, unsigned int byte)
+{
+ int i;
+
+ for (i = 0; i < 8; i++) {
+ adap->setclk(0);
+ udelay(adap->data_hold);
+ adap->setdat(byte & 1);
+ udelay(adap->data_setup);
+ adap->setclk(1);
+ udelay(adap->clock_high);
+ byte >>= 1;
+ }
+}
+
+/*
+ * Send a set of bytes to the chip. We need to pulse the MODE line
+ * between each byte, but never at the start nor at the end of the
+ * transfer.
+ */
+static void sendbytes(struct l3_pins *adap, const u8 *buf,
+ int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (i) {
+ udelay(adap->mode_hold);
+ adap->setmode(0);
+ udelay(adap->mode);
+ }
+ adap->setmode(1);
+ udelay(adap->mode_setup);
+ sendbyte(adap, buf[i]);
+ }
+}
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len)
+{
+ adap->setclk(1);
+ adap->setdat(1);
+ adap->setmode(1);
+ udelay(adap->mode);
+
+ adap->setmode(0);
+ udelay(adap->mode_setup);
+ sendbyte(adap, addr);
+ udelay(adap->mode_hold);
+
+ sendbytes(adap, data, len);
+
+ adap->setclk(1);
+ adap->setdat(1);
+ adap->setmode(0);
+
+ return len;
+}
+EXPORT_SYMBOL_GPL(l3_write);
+
+MODULE_DESCRIPTION("L3 bit-banging driver");
+MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ALSA Soc PCM3008 codec support
+ *
+ * Author: Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * Based on AC97 Soc codec, original copyright follow:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Generic PCM3008 support.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "pcm3008.h"
+
+#define PCM3008_VERSION "0.2"
+
+#define PCM3008_RATES (SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000)
+
+struct snd_soc_dai pcm3008_dai = {
+ .name = "PCM3008 HiFi",
+ .playback = {
+ .stream_name = "PCM3008 Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PCM3008_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .capture = {
+ .stream_name = "PCM3008 Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PCM3008_RATES,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+};
+EXPORT_SYMBOL_GPL(pcm3008_dai);
+
+static void pcm3008_gpio_free(struct pcm3008_setup_data *setup)
+{
+ gpio_free(setup->dem0_pin);
+ gpio_free(setup->dem1_pin);
+ gpio_free(setup->pdad_pin);
+ gpio_free(setup->pdda_pin);
+}
+
+static int pcm3008_soc_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct pcm3008_setup_data *setup = socdev->codec_data;
+ int ret = 0;
+
+ printk(KERN_INFO "PCM3008 SoC Audio Codec %s\n", PCM3008_VERSION);
+
+ socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (!socdev->codec)
+ return -ENOMEM;
+
+ codec = socdev->codec;
+ mutex_init(&codec->mutex);
+
+ codec->name = "PCM3008";
+ codec->owner = THIS_MODULE;
+ codec->dai = &pcm3008_dai;
+ codec->num_dai = 1;
+ codec->write = NULL;
+ codec->read = NULL;
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ /* Register PCMs. */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "pcm3008: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ /* Register Card. */
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "pcm3008: failed to register card\n");
+ goto card_err;
+ }
+
+ /* DEM1 DEM0 DE-EMPHASIS_MODE
+ * Low Low De-emphasis 44.1 kHz ON
+ * Low High De-emphasis OFF
+ * High Low De-emphasis 48 kHz ON
+ * High High De-emphasis 32 kHz ON
+ */
+
+ /* Configure DEM0 GPIO (turning OFF DAC De-emphasis). */
+ ret = gpio_request(setup->dem0_pin, "codec_dem0");
+ if (ret == 0)
+ ret = gpio_direction_output(setup->dem0_pin, 1);
+ if (ret != 0)
+ goto gpio_err;
+
+ /* Configure DEM1 GPIO (turning OFF DAC De-emphasis). */
+ ret = gpio_request(setup->dem1_pin, "codec_dem1");
+ if (ret == 0)
+ ret = gpio_direction_output(setup->dem1_pin, 0);
+ if (ret != 0)
+ goto gpio_err;
+
+ /* Configure PDAD GPIO. */
+ ret = gpio_request(setup->pdad_pin, "codec_pdad");
+ if (ret == 0)
+ ret = gpio_direction_output(setup->pdad_pin, 1);
+ if (ret != 0)
+ goto gpio_err;
+
+ /* Configure PDDA GPIO. */
+ ret = gpio_request(setup->pdda_pin, "codec_pdda");
+ if (ret == 0)
+ ret = gpio_direction_output(setup->pdda_pin, 1);
+ if (ret != 0)
+ goto gpio_err;
+
+ return ret;
+
+gpio_err:
+ pcm3008_gpio_free(setup);
+card_err:
+ snd_soc_free_pcms(socdev);
+pcm_err:
+ kfree(socdev->codec);
+
+ return ret;
+}
+
+static int pcm3008_soc_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+ struct pcm3008_setup_data *setup = socdev->codec_data;
+
+ if (!codec)
+ return 0;
+
+ pcm3008_gpio_free(setup);
+ snd_soc_free_pcms(socdev);
+ kfree(socdev->codec);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcm3008_soc_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct pcm3008_setup_data *setup = socdev->codec_data;
+
+ gpio_set_value(setup->pdad_pin, 0);
+ gpio_set_value(setup->pdda_pin, 0);
+
+ return 0;
+}
+
+static int pcm3008_soc_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct pcm3008_setup_data *setup = socdev->codec_data;
+
+ gpio_set_value(setup->pdad_pin, 1);
+ gpio_set_value(setup->pdda_pin, 1);
+
+ return 0;
+}
+#else
+#define pcm3008_soc_suspend NULL
+#define pcm3008_soc_resume NULL
+#endif
+
+struct snd_soc_codec_device soc_codec_dev_pcm3008 = {
+ .probe = pcm3008_soc_probe,
+ .remove = pcm3008_soc_remove,
+ .suspend = pcm3008_soc_suspend,
+ .resume = pcm3008_soc_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_pcm3008);
+
+static int __init pcm3008_init(void)
+{
+ return snd_soc_register_dai(&pcm3008_dai);
+}
+module_init(pcm3008_init);
+
+static void __exit pcm3008_exit(void)
+{
+ snd_soc_unregister_dai(&pcm3008_dai);
+}
+module_exit(pcm3008_exit);
+
+MODULE_DESCRIPTION("Soc PCM3008 driver");
+MODULE_AUTHOR("Hugo Villeneuve");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * PCM3008 ALSA SoC Layer
+ *
+ * Author: Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_SOC_PCM3008_H
+#define __LINUX_SND_SOC_PCM3008_H
+
+struct pcm3008_setup_data {
+ unsigned dem0_pin;
+ unsigned dem1_pin;
+ unsigned pdad_pin;
+ unsigned pdda_pin;
+};
+
+extern struct snd_soc_codec_device soc_codec_dev_pcm3008;
+extern struct snd_soc_dai pcm3008_dai;
+
+#endif
}
static int ssm2602_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
u16 srate;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
struct ssm2602_priv *ssm2602 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
u16 iface = ssm2602_read_reg_cache(codec, SSM2602_IFACE) & 0xfff3;
int i = get_coeff(ssm2602->sysclk, params_rate(params));
+ if (substream == ssm2602->slave_substream) {
+ dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+ return 0;
+ }
+
/*no match is found*/
if (i == ARRAY_SIZE(coeff_div))
return -EINVAL;
return 0;
}
-static int ssm2602_startup(struct snd_pcm_substream *substream)
+static int ssm2602_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
struct ssm2602_priv *ssm2602 = codec->private_data;
+ struct i2c_client *i2c = codec->control_data;
struct snd_pcm_runtime *master_runtime;
/* The DAI has shared clocks so if we already have a playback or
* capture going then constrain this substream to match it.
+ * TODO: the ssm2602 allows pairs of non-matching PB/REC rates
*/
if (ssm2602->master_substream) {
master_runtime = ssm2602->master_substream->runtime;
+ dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
+ master_runtime->sample_bits,
+ master_runtime->rate);
+
snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_RATE,
master_runtime->rate,
return 0;
}
-static int ssm2602_pcm_prepare(struct snd_pcm_substream *substream)
+static int ssm2602_pcm_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static void ssm2602_shutdown(struct snd_pcm_substream *substream)
+static void ssm2602_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
+ struct ssm2602_priv *ssm2602 = codec->private_data;
/* deactivate */
if (!codec->active)
ssm2602_write(codec, SSM2602_ACTIVE, 0);
+
+ if (ssm2602->master_substream == substream)
+ ssm2602->master_substream = ssm2602->slave_substream;
+
+ ssm2602->slave_substream = NULL;
}
static int ssm2602_mute(struct snd_soc_dai *dai, int mute)
iface |= 0x0001;
break;
case SND_SOC_DAIFMT_DSP_A:
- iface |= 0x0003;
+ iface |= 0x0013;
break;
case SND_SOC_DAIFMT_DSP_B:
- iface |= 0x0013;
+ iface |= 0x0003;
break;
default:
return -EINVAL;
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
SNDRV_PCM_RATE_96000)
+#define SSM2602_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
struct snd_soc_dai ssm2602_dai = {
.name = "SSM2602",
.playback = {
.channels_min = 2,
.channels_max = 2,
.rates = SSM2602_RATES,
- .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .formats = SSM2602_FORMATS,},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SSM2602_RATES,
- .formats = SNDRV_PCM_FMTBIT_S32_LE,},
+ .formats = SSM2602_FORMATS,},
.ops = {
.startup = ssm2602_startup,
.prepare = ssm2602_pcm_prepare,
.hw_params = ssm2602_hw_params,
.shutdown = ssm2602_shutdown,
- },
- .dai_ops = {
.digital_mute = ssm2602_mute,
.set_sysclk = ssm2602_set_dai_sysclk,
.set_fmt = ssm2602_set_dai_fmt,
ssm2602_add_controls(codec);
ssm2602_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
pr_err("ssm2602: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_ssm2602);
+static int __init ssm2602_modinit(void)
+{
+ return snd_soc_register_dai(&ssm2602_dai);
+}
+module_init(ssm2602_modinit);
+
+static void __exit ssm2602_exit(void)
+{
+ snd_soc_unregister_dai(&ssm2602_dai);
+}
+module_exit(ssm2602_exit);
+
MODULE_DESCRIPTION("ASoC ssm2602 driver");
MODULE_AUTHOR("Cliff Cai");
MODULE_LICENSE("GPL");
#define AIC23_VERSION "0.1"
-struct tlv320aic23_srate_reg_info {
- u32 sample_rate;
- u8 control; /* SR3, SR2, SR1, SR0 and BOSR */
- u8 divider; /* if 0 CLKIN = MCLK, if 1 CLKIN = MCLK/2 */
-};
-
/*
* AIC23 register cache
*/
};
-/* tlv320aic23 related */
-static const struct tlv320aic23_srate_reg_info srate_reg_info[] = {
- {4000, 0x06, 1}, /* 4000 */
- {8000, 0x06, 0}, /* 8000 */
- {16000, 0x0C, 1}, /* 16000 */
- {22050, 0x11, 1}, /* 22050 */
- {24000, 0x00, 1}, /* 24000 */
- {32000, 0x0C, 0}, /* 32000 */
- {44100, 0x11, 0}, /* 44100 */
- {48000, 0x00, 0}, /* 48000 */
- {88200, 0x1F, 0}, /* 88200 */
- {96000, 0x0E, 0}, /* 96000 */
+/* AIC23 driver data */
+struct aic23 {
+ struct snd_soc_codec codec;
+ int mclk;
+ int requested_adc;
+ int requested_dac;
+};
+
+/*
+ * Common Crystals used
+ * 11.2896 Mhz /128 = *88.2k /192 = 58.8k
+ * 12.0000 Mhz /125 = *96k /136 = 88.235K
+ * 12.2880 Mhz /128 = *96k /192 = 64k
+ * 16.9344 Mhz /128 = 132.3k /192 = *88.2k
+ * 18.4320 Mhz /128 = 144k /192 = *96k
+ */
+
+/*
+ * Normal BOSR 0-256/2 = 128, 1-384/2 = 192
+ * USB BOSR 0-250/2 = 125, 1-272/2 = 136
+ */
+static const int bosr_usb_divisor_table[] = {
+ 128, 125, 192, 136
+};
+#define LOWER_GROUP ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<6) | (1<<7))
+#define UPPER_GROUP ((1<<8) | (1<<9) | (1<<10) | (1<<11) | (1<<15))
+static const unsigned short sr_valid_mask[] = {
+ LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 0*/
+ LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/
+ LOWER_GROUP, /* Usb, bosr - 0*/
+ UPPER_GROUP, /* Usb, bosr - 1*/
+};
+/*
+ * Every divisor is a factor of 11*12
+ */
+#define SR_MULT (11*12)
+#define A(x) (x) ? (SR_MULT/x) : 0
+static const unsigned char sr_adc_mult_table[] = {
+ A(2), A(2), A(12), A(12), A(0), A(0), A(3), A(1),
+ A(2), A(2), A(11), A(11), A(0), A(0), A(0), A(1)
+};
+static const unsigned char sr_dac_mult_table[] = {
+ A(2), A(12), A(2), A(12), A(0), A(0), A(3), A(1),
+ A(2), A(11), A(2), A(11), A(0), A(0), A(0), A(1)
};
+static unsigned get_score(int adc, int adc_l, int adc_h, int need_adc,
+ int dac, int dac_l, int dac_h, int need_dac)
+{
+ if ((adc >= adc_l) && (adc <= adc_h) &&
+ (dac >= dac_l) && (dac <= dac_h)) {
+ int diff_adc = need_adc - adc;
+ int diff_dac = need_dac - dac;
+ return abs(diff_adc) + abs(diff_dac);
+ }
+ return UINT_MAX;
+}
+
+static int find_rate(int mclk, u32 need_adc, u32 need_dac)
+{
+ int i, j;
+ int best_i = -1;
+ int best_j = -1;
+ int best_div = 0;
+ unsigned best_score = UINT_MAX;
+ int adc_l, adc_h, dac_l, dac_h;
+
+ need_adc *= SR_MULT;
+ need_dac *= SR_MULT;
+ /*
+ * rates given are +/- 1/32
+ */
+ adc_l = need_adc - (need_adc >> 5);
+ adc_h = need_adc + (need_adc >> 5);
+ dac_l = need_dac - (need_dac >> 5);
+ dac_h = need_dac + (need_dac >> 5);
+ for (i = 0; i < ARRAY_SIZE(bosr_usb_divisor_table); i++) {
+ int base = mclk / bosr_usb_divisor_table[i];
+ int mask = sr_valid_mask[i];
+ for (j = 0; j < ARRAY_SIZE(sr_adc_mult_table);
+ j++, mask >>= 1) {
+ int adc;
+ int dac;
+ int score;
+ if ((mask & 1) == 0)
+ continue;
+ adc = base * sr_adc_mult_table[j];
+ dac = base * sr_dac_mult_table[j];
+ score = get_score(adc, adc_l, adc_h, need_adc,
+ dac, dac_l, dac_h, need_dac);
+ if (best_score > score) {
+ best_score = score;
+ best_i = i;
+ best_j = j;
+ best_div = 0;
+ }
+ score = get_score((adc >> 1), adc_l, adc_h, need_adc,
+ (dac >> 1), dac_l, dac_h, need_dac);
+ /* prefer to have a /2 */
+ if ((score != UINT_MAX) && (best_score >= score)) {
+ best_score = score;
+ best_i = i;
+ best_j = j;
+ best_div = 1;
+ }
+ }
+ }
+ return (best_j << 2) | best_i | (best_div << TLV320AIC23_CLKIN_SHIFT);
+}
+
+#ifdef DEBUG
+static void get_current_sample_rates(struct snd_soc_codec *codec, int mclk,
+ u32 *sample_rate_adc, u32 *sample_rate_dac)
+{
+ int src = tlv320aic23_read_reg_cache(codec, TLV320AIC23_SRATE);
+ int sr = (src >> 2) & 0x0f;
+ int val = (mclk / bosr_usb_divisor_table[src & 3]);
+ int adc = (val * sr_adc_mult_table[sr]) / SR_MULT;
+ int dac = (val * sr_dac_mult_table[sr]) / SR_MULT;
+ if (src & TLV320AIC23_CLKIN_HALF) {
+ adc >>= 1;
+ dac >>= 1;
+ }
+ *sample_rate_adc = adc;
+ *sample_rate_dac = dac;
+}
+#endif
+
+static int set_sample_rate_control(struct snd_soc_codec *codec, int mclk,
+ u32 sample_rate_adc, u32 sample_rate_dac)
+{
+ /* Search for the right sample rate */
+ int data = find_rate(mclk, sample_rate_adc, sample_rate_dac);
+ if (data < 0) {
+ printk(KERN_ERR "%s:Invalid rate %u,%u requested\n",
+ __func__, sample_rate_adc, sample_rate_dac);
+ return -EINVAL;
+ }
+ tlv320aic23_write(codec, TLV320AIC23_SRATE, data);
+#ifdef DEBUG
+ {
+ u32 adc, dac;
+ get_current_sample_rates(codec, mclk, &adc, &dac);
+ printk(KERN_DEBUG "actual samplerate = %u,%u reg=%x\n",
+ adc, dac, data);
+ }
+#endif
+ return 0;
+}
+
static int tlv320aic23_add_widgets(struct snd_soc_codec *codec)
{
snd_soc_dapm_new_controls(codec, tlv320aic23_dapm_widgets,
}
static int tlv320aic23_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
- u16 iface_reg, data;
- u8 count = 0;
+ u16 iface_reg;
+ int ret;
+ struct aic23 *aic23 = container_of(codec, struct aic23, codec);
+ u32 sample_rate_adc = aic23->requested_adc;
+ u32 sample_rate_dac = aic23->requested_dac;
+ u32 sample_rate = params_rate(params);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ aic23->requested_dac = sample_rate_dac = sample_rate;
+ if (!sample_rate_adc)
+ sample_rate_adc = sample_rate;
+ } else {
+ aic23->requested_adc = sample_rate_adc = sample_rate;
+ if (!sample_rate_dac)
+ sample_rate_dac = sample_rate;
+ }
+ ret = set_sample_rate_control(codec, aic23->mclk, sample_rate_adc,
+ sample_rate_dac);
+ if (ret < 0)
+ return ret;
iface_reg =
tlv320aic23_read_reg_cache(codec,
TLV320AIC23_DIGT_FMT) & ~(0x03 << 2);
-
- /* Search for the right sample rate */
- /* Verify what happens if the rate is not supported
- * now it goes to 96Khz */
- while ((srate_reg_info[count].sample_rate != params_rate(params)) &&
- (count < ARRAY_SIZE(srate_reg_info))) {
- count++;
- }
-
- data = (srate_reg_info[count].divider << TLV320AIC23_CLKIN_SHIFT) |
- (srate_reg_info[count]. control << TLV320AIC23_BOSR_SHIFT) |
- TLV320AIC23_USB_CLK_ON;
-
- tlv320aic23_write(codec, TLV320AIC23_SRATE, data);
-
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
break;
return 0;
}
-static int tlv320aic23_pcm_prepare(struct snd_pcm_substream *substream)
+static int tlv320aic23_pcm_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static void tlv320aic23_shutdown(struct snd_pcm_substream *substream)
+static void tlv320aic23_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
+ struct aic23 *aic23 = container_of(codec, struct aic23, codec);
/* deactivate */
if (!codec->active) {
udelay(50);
tlv320aic23_write(codec, TLV320AIC23_ACTIVE, 0x0);
}
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ aic23->requested_dac = 0;
+ else
+ aic23->requested_adc = 0;
}
static int tlv320aic23_mute(struct snd_soc_dai *dai, int mute)
case SND_SOC_DAIFMT_I2S:
iface_reg |= TLV320AIC23_FOR_I2S;
break;
- case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
iface_reg |= TLV320AIC23_FOR_DSP;
break;
case SND_SOC_DAIFMT_RIGHT_J:
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
-
- switch (freq) {
- case 12000000:
- return 0;
- }
- return -EINVAL;
+ struct aic23 *aic23 = container_of(codec, struct aic23, codec);
+ aic23->mclk = freq;
+ return 0;
}
static int tlv320aic23_set_bias_level(struct snd_soc_codec *codec,
.prepare = tlv320aic23_pcm_prepare,
.hw_params = tlv320aic23_hw_params,
.shutdown = tlv320aic23_shutdown,
- },
- .dai_ops = {
- .digital_mute = tlv320aic23_mute,
- .set_fmt = tlv320aic23_set_dai_fmt,
- .set_sysclk = tlv320aic23_set_dai_sysclk,
- }
+ .digital_mute = tlv320aic23_mute,
+ .set_fmt = tlv320aic23_set_dai_fmt,
+ .set_sysclk = tlv320aic23_set_dai_sysclk,
+ }
};
EXPORT_SYMBOL_GPL(tlv320aic23_dai);
tlv320aic23_add_controls(codec);
tlv320aic23_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "tlv320aic23: failed to register card\n");
goto card_err;
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
+ struct aic23 *aic23;
int ret = 0;
printk(KERN_INFO "AIC23 Audio Codec %s\n", AIC23_VERSION);
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
+ aic23 = kzalloc(sizeof(struct aic23), GFP_KERNEL);
+ if (aic23 == NULL)
return -ENOMEM;
-
+ codec = &aic23->codec;
socdev->codec = codec;
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
+ struct aic23 *aic23 = container_of(codec, struct aic23, codec);
if (codec->control_data)
tlv320aic23_set_bias_level(codec, SND_SOC_BIAS_OFF);
i2c_del_driver(&tlv320aic23_i2c_driver);
#endif
kfree(codec->reg_cache);
- kfree(codec);
+ kfree(aic23);
return 0;
}
};
EXPORT_SYMBOL_GPL(soc_codec_dev_tlv320aic23);
+static int __init tlv320aic23_modinit(void)
+{
+ return snd_soc_register_dai(&tlv320aic23_dai);
+}
+module_init(tlv320aic23_modinit);
+
+static void __exit tlv320aic23_exit(void)
+{
+ snd_soc_unregister_dai(&tlv320aic23_dai);
+}
+module_exit(tlv320aic23_exit);
+
MODULE_DESCRIPTION("ASoC TLV320AIC23 codec driver");
MODULE_AUTHOR("Arun KS <arunks@mistralsolutions.com>");
MODULE_LICENSE("GPL");
* Digital Audio Interface Operations
*/
static int aic26_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
},
.ops = {
.hw_params = aic26_hw_params,
- },
- .dai_ops = {
.digital_mute = aic26_mute,
.set_sysclk = aic26_set_sysclk,
.set_fmt = aic26_set_fmt,
/* CODEC is setup, we can register the card now */
dev_dbg(&pdev->dev, "Registering card\n");
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
dev_err(&pdev->dev, "aic26: failed to register card\n");
goto card_err;
static int aic26_spi_probe(struct spi_device *spi)
{
struct aic26 *aic26;
- int rc, i, reg;
+ int ret, i, reg;
dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
aic26->codec.reg_cache_size = AIC26_NUM_REGS;
aic26->codec.reg_cache = aic26->reg_cache;
+ aic26_dai.dev = &spi->dev;
+ ret = snd_soc_register_dai(&aic26_dai);
+ if (ret != 0) {
+ dev_err(&spi->dev, "Failed to register DAI: %d\n", ret);
+ kfree(aic26);
+ return ret;
+ }
+
/* Reset the codec to power on defaults */
aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00);
/* Register the sysfs files for debugging */
/* Create SysFS files */
- rc = device_create_file(&spi->dev, &dev_attr_keyclick);
- if (rc)
+ ret = device_create_file(&spi->dev, &dev_attr_keyclick);
+ if (ret)
dev_info(&spi->dev, "error creating sysfs files\n");
#if defined(CONFIG_SND_SOC_OF_SIMPLE)
{
struct aic26 *aic26 = dev_get_drvdata(&spi->dev);
+ snd_soc_unregister_dai(&aic26_dai);
kfree(aic26);
return 0;
SOC_DOUBLE_R("Line DAC Playback Volume", DACL1_2_LLOPM_VOL,
DACR1_2_RLOPM_VOL, 0, 0x7f, 1),
- SOC_DOUBLE_R("Line DAC Playback Switch", LLOPM_CTRL, RLOPM_CTRL, 3,
- 0x01, 0),
- SOC_DOUBLE_R("Line PGA Bypass Playback Volume", PGAL_2_LLOPM_VOL,
- PGAR_2_RLOPM_VOL, 0, 0x7f, 1),
- SOC_DOUBLE_R("Line Line2 Bypass Playback Volume", LINE2L_2_LLOPM_VOL,
+ SOC_SINGLE("LineL Playback Switch", LLOPM_CTRL, 3, 0x01, 0),
+ SOC_SINGLE("LineR Playback Switch", RLOPM_CTRL, 3, 0x01, 0),
+ SOC_DOUBLE_R("LineL DAC Playback Volume", DACL1_2_LLOPM_VOL,
+ DACR1_2_LLOPM_VOL, 0, 0x7f, 1),
+ SOC_SINGLE("LineL Left PGA Bypass Playback Volume", PGAL_2_LLOPM_VOL,
+ 0, 0x7f, 1),
+ SOC_SINGLE("LineR Right PGA Bypass Playback Volume", PGAR_2_RLOPM_VOL,
+ 0, 0x7f, 1),
+ SOC_DOUBLE_R("LineL Line2 Bypass Playback Volume", LINE2L_2_LLOPM_VOL,
+ LINE2R_2_LLOPM_VOL, 0, 0x7f, 1),
+ SOC_DOUBLE_R("LineR Line2 Bypass Playback Volume", LINE2L_2_RLOPM_VOL,
LINE2R_2_RLOPM_VOL, 0, 0x7f, 1),
SOC_DOUBLE_R("Mono DAC Playback Volume", DACL1_2_MONOLOPM_VOL,
DACR1_2_HPROUT_VOL, 0, 0x7f, 1),
SOC_DOUBLE_R("HP DAC Playback Switch", HPLOUT_CTRL, HPROUT_CTRL, 3,
0x01, 0),
- SOC_DOUBLE_R("HP PGA Bypass Playback Volume", PGAL_2_HPLOUT_VOL,
+ SOC_DOUBLE_R("HP Right PGA Bypass Playback Volume", PGAR_2_HPLOUT_VOL,
PGAR_2_HPROUT_VOL, 0, 0x7f, 1),
+ SOC_SINGLE("HPL PGA Bypass Playback Volume", PGAL_2_HPLOUT_VOL,
+ 0, 0x7f, 1),
+ SOC_SINGLE("HPR PGA Bypass Playback Volume", PGAL_2_HPROUT_VOL,
+ 0, 0x7f, 1),
SOC_DOUBLE_R("HP Line2 Bypass Playback Volume", LINE2L_2_HPLOUT_VOL,
LINE2R_2_HPROUT_VOL, 0, 0x7f, 1),
DACR1_2_HPRCOM_VOL, 0, 0x7f, 1),
SOC_DOUBLE_R("HPCOM DAC Playback Switch", HPLCOM_CTRL, HPRCOM_CTRL, 3,
0x01, 0),
- SOC_DOUBLE_R("HPCOM PGA Bypass Playback Volume", PGAL_2_HPLCOM_VOL,
- PGAR_2_HPRCOM_VOL, 0, 0x7f, 1),
+ SOC_SINGLE("HPLCOM PGA Bypass Playback Volume", PGAL_2_HPLCOM_VOL,
+ 0, 0x7f, 1),
+ SOC_SINGLE("HPRCOM PGA Bypass Playback Volume", PGAL_2_HPRCOM_VOL,
+ 0, 0x7f, 1),
SOC_DOUBLE_R("HPCOM Line2 Bypass Playback Volume", LINE2L_2_HPLCOM_VOL,
LINE2R_2_HPRCOM_VOL, 0, 0x7f, 1),
/* Left DAC_L1 Mixer */
static const struct snd_kcontrol_new aic3x_left_dac_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", DACL1_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", DACL1_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", DACL1_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", DACL1_2_MONOLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HP Switch", DACL1_2_HPLOUT_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HPCOM Switch", DACL1_2_HPLCOM_VOL, 7, 1, 0),
/* Right DAC_R1 Mixer */
static const struct snd_kcontrol_new aic3x_right_dac_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", DACR1_2_RLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", DACR1_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", DACR1_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", DACR1_2_MONOLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HP Switch", DACR1_2_HPROUT_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HPCOM Switch", DACR1_2_HPRCOM_VOL, 7, 1, 0),
/* Left PGA Mixer */
static const struct snd_kcontrol_new aic3x_left_pga_mixer_controls[] = {
SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_LADC_CTRL, 3, 1, 1),
+ SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_LADC_CTRL, 3, 1, 1),
SOC_DAPM_SINGLE_AIC3X("Line2L Switch", LINE2L_2_LADC_CTRL, 3, 1, 1),
SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_LADC_CTRL, 4, 1, 1),
+ SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_LADC_CTRL, 0, 1, 1),
};
/* Right PGA Mixer */
static const struct snd_kcontrol_new aic3x_right_pga_mixer_controls[] = {
SOC_DAPM_SINGLE_AIC3X("Line1R Switch", LINE1R_2_RADC_CTRL, 3, 1, 1),
+ SOC_DAPM_SINGLE_AIC3X("Line1L Switch", LINE1L_2_RADC_CTRL, 3, 1, 1),
SOC_DAPM_SINGLE_AIC3X("Line2R Switch", LINE2R_2_RADC_CTRL, 3, 1, 1),
+ SOC_DAPM_SINGLE_AIC3X("Mic3L Switch", MIC3LR_2_RADC_CTRL, 4, 1, 1),
SOC_DAPM_SINGLE_AIC3X("Mic3R Switch", MIC3LR_2_RADC_CTRL, 0, 1, 1),
};
/* Left PGA Bypass Mixer */
static const struct snd_kcontrol_new aic3x_left_pga_bp_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", PGAL_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", PGAL_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", PGAL_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", PGAL_2_MONOLOPM_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HP Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HPCOM Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPL Switch", PGAL_2_HPLOUT_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPR Switch", PGAL_2_HPROUT_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPLCOM Switch", PGAL_2_HPLCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPRCOM Switch", PGAL_2_HPRCOM_VOL, 7, 1, 0),
};
/* Right PGA Bypass Mixer */
static const struct snd_kcontrol_new aic3x_right_pga_bp_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", PGAR_2_RLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", PGAR_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", PGAR_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", PGAR_2_MONOLOPM_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HP Switch", PGAR_2_HPROUT_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HPCOM Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPL Switch", PGAR_2_HPLOUT_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPR Switch", PGAR_2_HPROUT_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPLCOM Switch", PGAR_2_HPLCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPRCOM Switch", PGAR_2_HPRCOM_VOL, 7, 1, 0),
};
/* Left Line2 Bypass Mixer */
static const struct snd_kcontrol_new aic3x_left_line2_bp_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", LINE2L_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", LINE2L_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", LINE2L_2_MONOLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HP Switch", LINE2L_2_HPLOUT_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HPCOM Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPLCOM Switch", LINE2L_2_HPLCOM_VOL, 7, 1, 0),
};
/* Right Line2 Bypass Mixer */
static const struct snd_kcontrol_new aic3x_right_line2_bp_mixer_controls[] = {
- SOC_DAPM_SINGLE("Line Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineL Switch", LINE2R_2_LLOPM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("LineR Switch", LINE2R_2_RLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("Mono Switch", LINE2R_2_MONOLOPM_VOL, 7, 1, 0),
SOC_DAPM_SINGLE("HP Switch", LINE2R_2_HPROUT_VOL, 7, 1, 0),
- SOC_DAPM_SINGLE("HPCOM Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0),
+ SOC_DAPM_SINGLE("HPRCOM Switch", LINE2R_2_HPRCOM_VOL, 7, 1, 0),
};
static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
/* Mono Output */
SND_SOC_DAPM_PGA("Mono Out", MONOLOPM_CTRL, 0, 0, NULL, 0),
- /* Left Inputs to Left ADC */
+ /* Inputs to Left ADC */
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", LINE1L_2_LADC_CTRL, 2, 0),
SND_SOC_DAPM_MIXER("Left PGA Mixer", SND_SOC_NOPM, 0, 0,
&aic3x_left_pga_mixer_controls[0],
ARRAY_SIZE(aic3x_left_pga_mixer_controls)),
SND_SOC_DAPM_MUX("Left Line1L Mux", SND_SOC_NOPM, 0, 0,
&aic3x_left_line1_mux_controls),
+ SND_SOC_DAPM_MUX("Left Line1R Mux", SND_SOC_NOPM, 0, 0,
+ &aic3x_left_line1_mux_controls),
SND_SOC_DAPM_MUX("Left Line2L Mux", SND_SOC_NOPM, 0, 0,
&aic3x_left_line2_mux_controls),
- /* Right Inputs to Right ADC */
+ /* Inputs to Right ADC */
SND_SOC_DAPM_ADC("Right ADC", "Right Capture",
LINE1R_2_RADC_CTRL, 2, 0),
SND_SOC_DAPM_MIXER("Right PGA Mixer", SND_SOC_NOPM, 0, 0,
&aic3x_right_pga_mixer_controls[0],
ARRAY_SIZE(aic3x_right_pga_mixer_controls)),
+ SND_SOC_DAPM_MUX("Right Line1L Mux", SND_SOC_NOPM, 0, 0,
+ &aic3x_right_line1_mux_controls),
SND_SOC_DAPM_MUX("Right Line1R Mux", SND_SOC_NOPM, 0, 0,
&aic3x_right_line1_mux_controls),
SND_SOC_DAPM_MUX("Right Line2R Mux", SND_SOC_NOPM, 0, 0,
{"Left DAC Mux", "DAC_L2", "Left DAC"},
{"Left DAC Mux", "DAC_L3", "Left DAC"},
- {"Left DAC_L1 Mixer", "Line Switch", "Left DAC Mux"},
+ {"Left DAC_L1 Mixer", "LineL Switch", "Left DAC Mux"},
+ {"Left DAC_L1 Mixer", "LineR Switch", "Left DAC Mux"},
{"Left DAC_L1 Mixer", "Mono Switch", "Left DAC Mux"},
{"Left DAC_L1 Mixer", "HP Switch", "Left DAC Mux"},
{"Left DAC_L1 Mixer", "HPCOM Switch", "Left DAC Mux"},
{"Right DAC Mux", "DAC_R2", "Right DAC"},
{"Right DAC Mux", "DAC_R3", "Right DAC"},
- {"Right DAC_R1 Mixer", "Line Switch", "Right DAC Mux"},
+ {"Right DAC_R1 Mixer", "LineL Switch", "Right DAC Mux"},
+ {"Right DAC_R1 Mixer", "LineR Switch", "Right DAC Mux"},
{"Right DAC_R1 Mixer", "Mono Switch", "Right DAC Mux"},
{"Right DAC_R1 Mixer", "HP Switch", "Right DAC Mux"},
{"Right DAC_R1 Mixer", "HPCOM Switch", "Right DAC Mux"},
{"Left Line2L Mux", "differential", "LINE2L"},
{"Left PGA Mixer", "Line1L Switch", "Left Line1L Mux"},
+ {"Left PGA Mixer", "Line1R Switch", "Left Line1R Mux"},
{"Left PGA Mixer", "Line2L Switch", "Left Line2L Mux"},
{"Left PGA Mixer", "Mic3L Switch", "MIC3L"},
+ {"Left PGA Mixer", "Mic3R Switch", "MIC3R"},
{"Left ADC", NULL, "Left PGA Mixer"},
{"Left ADC", NULL, "GPIO1 dmic modclk"},
{"Right Line2R Mux", "single-ended", "LINE2R"},
{"Right Line2R Mux", "differential", "LINE2R"},
+ {"Right PGA Mixer", "Line1L Switch", "Right Line1L Mux"},
{"Right PGA Mixer", "Line1R Switch", "Right Line1R Mux"},
{"Right PGA Mixer", "Line2R Switch", "Right Line2R Mux"},
+ {"Right PGA Mixer", "Mic3L Switch", "MIC3L"},
{"Right PGA Mixer", "Mic3R Switch", "MIC3R"},
{"Right ADC", NULL, "Right PGA Mixer"},
{"Right ADC", NULL, "GPIO1 dmic modclk"},
/* Left PGA Bypass */
- {"Left PGA Bypass Mixer", "Line Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "LineL Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "LineR Switch", "Left PGA Mixer"},
{"Left PGA Bypass Mixer", "Mono Switch", "Left PGA Mixer"},
- {"Left PGA Bypass Mixer", "HP Switch", "Left PGA Mixer"},
- {"Left PGA Bypass Mixer", "HPCOM Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "HPL Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "HPR Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "HPLCOM Switch", "Left PGA Mixer"},
+ {"Left PGA Bypass Mixer", "HPRCOM Switch", "Left PGA Mixer"},
{"Left HPCOM Mux", "differential of HPLOUT", "Left PGA Bypass Mixer"},
{"Left HPCOM Mux", "constant VCM", "Left PGA Bypass Mixer"},
{"Left HP Out", NULL, "Left PGA Bypass Mixer"},
/* Right PGA Bypass */
- {"Right PGA Bypass Mixer", "Line Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "LineL Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "LineR Switch", "Right PGA Mixer"},
{"Right PGA Bypass Mixer", "Mono Switch", "Right PGA Mixer"},
- {"Right PGA Bypass Mixer", "HP Switch", "Right PGA Mixer"},
- {"Right PGA Bypass Mixer", "HPCOM Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "HPL Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "HPR Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "HPLCOM Switch", "Right PGA Mixer"},
+ {"Right PGA Bypass Mixer", "HPRCOM Switch", "Right PGA Mixer"},
{"Right HPCOM Mux", "differential of HPROUT", "Right PGA Bypass Mixer"},
{"Right HPCOM Mux", "constant VCM", "Right PGA Bypass Mixer"},
{"Right HP Out", NULL, "Right PGA Bypass Mixer"},
/* Left Line2 Bypass */
- {"Left Line2 Bypass Mixer", "Line Switch", "Left Line2L Mux"},
+ {"Left Line2 Bypass Mixer", "LineL Switch", "Left Line2L Mux"},
+ {"Left Line2 Bypass Mixer", "LineR Switch", "Left Line2L Mux"},
{"Left Line2 Bypass Mixer", "Mono Switch", "Left Line2L Mux"},
{"Left Line2 Bypass Mixer", "HP Switch", "Left Line2L Mux"},
- {"Left Line2 Bypass Mixer", "HPCOM Switch", "Left Line2L Mux"},
+ {"Left Line2 Bypass Mixer", "HPLCOM Switch", "Left Line2L Mux"},
{"Left HPCOM Mux", "differential of HPLOUT", "Left Line2 Bypass Mixer"},
{"Left HPCOM Mux", "constant VCM", "Left Line2 Bypass Mixer"},
{"Left HP Out", NULL, "Left Line2 Bypass Mixer"},
/* Right Line2 Bypass */
- {"Right Line2 Bypass Mixer", "Line Switch", "Right Line2R Mux"},
+ {"Right Line2 Bypass Mixer", "LineL Switch", "Right Line2R Mux"},
+ {"Right Line2 Bypass Mixer", "LineR Switch", "Right Line2R Mux"},
{"Right Line2 Bypass Mixer", "Mono Switch", "Right Line2R Mux"},
{"Right Line2 Bypass Mixer", "HP Switch", "Right Line2R Mux"},
- {"Right Line2 Bypass Mixer", "HPCOM Switch", "Right Line2R Mux"},
+ {"Right Line2 Bypass Mixer", "HPRCOM Switch", "Right Line2R Mux"},
{"Right HPCOM Mux", "differential of HPROUT", "Right Line2 Bypass Mixer"},
{"Right HPCOM Mux", "constant VCM", "Right Line2 Bypass Mixer"},
}
static int aic3x_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = codec_dai->codec;
struct aic3x_priv *aic3x = codec->private_data;
u8 iface_areg, iface_breg;
+ int delay = 0;
iface_areg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLA) & 0x3f;
iface_breg = aic3x_read_reg_cache(codec, AIC3X_ASD_INTF_CTRLB) & 0x3f;
SND_SOC_DAIFMT_INV_MASK)) {
case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
break;
+ case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
+ delay = 1;
case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
iface_breg |= (0x01 << 6);
break;
/* set iface */
aic3x_write(codec, AIC3X_ASD_INTF_CTRLA, iface_areg);
aic3x_write(codec, AIC3X_ASD_INTF_CTRLB, iface_breg);
+ aic3x_write(codec, AIC3X_ASD_INTF_CTRLC, delay);
return 0;
}
}
EXPORT_SYMBOL_GPL(aic3x_get_gpio);
+void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect,
+ int headset_debounce, int button_debounce)
+{
+ u8 val;
+
+ val = ((detect & AIC3X_HEADSET_DETECT_MASK)
+ << AIC3X_HEADSET_DETECT_SHIFT) |
+ ((headset_debounce & AIC3X_HEADSET_DEBOUNCE_MASK)
+ << AIC3X_HEADSET_DEBOUNCE_SHIFT) |
+ ((button_debounce & AIC3X_BUTTON_DEBOUNCE_MASK)
+ << AIC3X_BUTTON_DEBOUNCE_SHIFT);
+
+ if (detect & AIC3X_HEADSET_DETECT_MASK)
+ val |= AIC3X_HEADSET_DETECT_ENABLED;
+
+ aic3x_write(codec, AIC3X_HEADSET_DETECT_CTRL_A, val);
+}
+EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
+
int aic3x_headset_detected(struct snd_soc_codec *codec)
{
u8 val;
- aic3x_read(codec, AIC3X_RT_IRQ_FLAGS_REG, &val);
- return (val >> 2) & 1;
+ aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
+ return (val >> 4) & 1;
}
EXPORT_SYMBOL_GPL(aic3x_headset_detected);
+int aic3x_button_pressed(struct snd_soc_codec *codec)
+{
+ u8 val;
+ aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
+ return (val >> 5) & 1;
+}
+EXPORT_SYMBOL_GPL(aic3x_button_pressed);
+
#define AIC3X_RATES SNDRV_PCM_RATE_8000_96000
#define AIC3X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE)
.formats = AIC3X_FORMATS,},
.ops = {
.hw_params = aic3x_hw_params,
- },
- .dai_ops = {
.digital_mute = aic3x_mute,
.set_sysclk = aic3x_set_dai_sysclk,
.set_fmt = aic3x_set_dai_fmt,
aic3x_add_controls(codec);
aic3x_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "aic3x: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_aic3x);
+static int __init aic3x_modinit(void)
+{
+ return snd_soc_register_dai(&aic3x_dai);
+}
+module_init(aic3x_modinit);
+
+static void __exit aic3x_exit(void)
+{
+ snd_soc_unregister_dai(&aic3x_dai);
+}
+module_exit(aic3x_exit);
+
MODULE_DESCRIPTION("ASoC TLV320AIC3X codec driver");
MODULE_AUTHOR("Vladimir Barinov");
MODULE_LICENSE("GPL");
#define AIC3X_ASD_INTF_CTRLA 8
/* Audio serial data interface control register B */
#define AIC3X_ASD_INTF_CTRLB 9
+/* Audio serial data interface control register C */
+#define AIC3X_ASD_INTF_CTRLC 10
/* Audio overflow status and PLL R value programming register */
#define AIC3X_OVRF_STATUS_AND_PLLR_REG 11
/* Audio codec digital filter control register */
#define AIC3X_CODEC_DFILT_CTRL 12
-
+/* Headset/button press detection register */
+#define AIC3X_HEADSET_DETECT_CTRL_A 13
+#define AIC3X_HEADSET_DETECT_CTRL_B 14
/* ADC PGA Gain control registers */
#define LADC_VOL 15
#define RADC_VOL 16
#define MIC3LR_2_RADC_CTRL 18
/* Line1 Input control registers */
#define LINE1L_2_LADC_CTRL 19
+#define LINE1R_2_LADC_CTRL 21
#define LINE1R_2_RADC_CTRL 22
+#define LINE1L_2_RADC_CTRL 24
/* Line2 Input control registers */
#define LINE2L_2_LADC_CTRL 20
#define LINE2R_2_RADC_CTRL 23
#define LINE2L_2_HPLOUT_VOL 45
#define LINE2R_2_HPROUT_VOL 62
#define PGAL_2_HPLOUT_VOL 46
+#define PGAL_2_HPROUT_VOL 60
+#define PGAR_2_HPLOUT_VOL 49
#define PGAR_2_HPROUT_VOL 63
#define DACL1_2_HPLOUT_VOL 47
#define DACR1_2_HPROUT_VOL 64
#define LINE2L_2_HPLCOM_VOL 52
#define LINE2R_2_HPRCOM_VOL 69
#define PGAL_2_HPLCOM_VOL 53
+#define PGAR_2_HPLCOM_VOL 56
+#define PGAL_2_HPRCOM_VOL 67
#define PGAR_2_HPRCOM_VOL 70
#define DACL1_2_HPLCOM_VOL 54
#define DACR1_2_HPRCOM_VOL 71
#define MONOLOPM_CTRL 79
/* Line Output Plus/Minus control registers */
#define LINE2L_2_LLOPM_VOL 80
+#define LINE2L_2_RLOPM_VOL 87
+#define LINE2R_2_LLOPM_VOL 83
#define LINE2R_2_RLOPM_VOL 90
#define PGAL_2_LLOPM_VOL 81
+#define PGAL_2_RLOPM_VOL 88
+#define PGAR_2_LLOPM_VOL 84
#define PGAR_2_RLOPM_VOL 91
#define DACL1_2_LLOPM_VOL 82
+#define DACL1_2_RLOPM_VOL 89
#define DACR1_2_RLOPM_VOL 92
+#define DACR1_2_LLOPM_VOL 85
#define LLOPM_CTRL 86
#define RLOPM_CTRL 93
/* GPIO/IRQ registers */
void aic3x_set_gpio(struct snd_soc_codec *codec, int gpio, int state);
int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio);
+
+/* headset detection / button API */
+
+/* The AIC3x supports detection of stereo headsets (GND + left + right signal)
+ * and cellular headsets (GND + speaker output + microphone input).
+ * It is recommended to enable MIC bias for this function to work properly.
+ * For more information, please refer to the datasheet. */
+enum {
+ AIC3X_HEADSET_DETECT_OFF = 0,
+ AIC3X_HEADSET_DETECT_STEREO = 1,
+ AIC3X_HEADSET_DETECT_CELLULAR = 2,
+ AIC3X_HEADSET_DETECT_BOTH = 3
+};
+
+enum {
+ AIC3X_HEADSET_DEBOUNCE_16MS = 0,
+ AIC3X_HEADSET_DEBOUNCE_32MS = 1,
+ AIC3X_HEADSET_DEBOUNCE_64MS = 2,
+ AIC3X_HEADSET_DEBOUNCE_128MS = 3,
+ AIC3X_HEADSET_DEBOUNCE_256MS = 4,
+ AIC3X_HEADSET_DEBOUNCE_512MS = 5
+};
+
+enum {
+ AIC3X_BUTTON_DEBOUNCE_0MS = 0,
+ AIC3X_BUTTON_DEBOUNCE_8MS = 1,
+ AIC3X_BUTTON_DEBOUNCE_16MS = 2,
+ AIC3X_BUTTON_DEBOUNCE_32MS = 3
+};
+
+#define AIC3X_HEADSET_DETECT_ENABLED 0x80
+#define AIC3X_HEADSET_DETECT_SHIFT 5
+#define AIC3X_HEADSET_DETECT_MASK 3
+#define AIC3X_HEADSET_DEBOUNCE_SHIFT 2
+#define AIC3X_HEADSET_DEBOUNCE_MASK 7
+#define AIC3X_BUTTON_DEBOUNCE_SHIFT 0
+#define AIC3X_BUTTON_DEBOUNCE_MASK 3
+
+/* see the enums above for valid parameters to this function */
+void aic3x_set_headset_detection(struct snd_soc_codec *codec, int detect,
+ int headset_debounce, int button_debounce);
int aic3x_headset_detected(struct snd_soc_codec *codec);
+int aic3x_button_pressed(struct snd_soc_codec *codec);
struct aic3x_setup_data {
int i2c_bus;
--- /dev/null
+/*
+ * ALSA SoC TWL4030 codec driver
+ *
+ * Author: Steve Sakoman, <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/i2c/twl4030.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "twl4030.h"
+
+/*
+ * twl4030 register cache & default register settings
+ */
+static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
+ 0x00, /* this register not used */
+ 0x93, /* REG_CODEC_MODE (0x1) */
+ 0xc3, /* REG_OPTION (0x2) */
+ 0x00, /* REG_UNKNOWN (0x3) */
+ 0x00, /* REG_MICBIAS_CTL (0x4) */
+ 0x20, /* REG_ANAMICL (0x5) */
+ 0x00, /* REG_ANAMICR (0x6) */
+ 0x00, /* REG_AVADC_CTL (0x7) */
+ 0x00, /* REG_ADCMICSEL (0x8) */
+ 0x00, /* REG_DIGMIXING (0x9) */
+ 0x0c, /* REG_ATXL1PGA (0xA) */
+ 0x0c, /* REG_ATXR1PGA (0xB) */
+ 0x00, /* REG_AVTXL2PGA (0xC) */
+ 0x00, /* REG_AVTXR2PGA (0xD) */
+ 0x01, /* REG_AUDIO_IF (0xE) */
+ 0x00, /* REG_VOICE_IF (0xF) */
+ 0x00, /* REG_ARXR1PGA (0x10) */
+ 0x00, /* REG_ARXL1PGA (0x11) */
+ 0x6c, /* REG_ARXR2PGA (0x12) */
+ 0x6c, /* REG_ARXL2PGA (0x13) */
+ 0x00, /* REG_VRXPGA (0x14) */
+ 0x00, /* REG_VSTPGA (0x15) */
+ 0x00, /* REG_VRX2ARXPGA (0x16) */
+ 0x0c, /* REG_AVDAC_CTL (0x17) */
+ 0x00, /* REG_ARX2VTXPGA (0x18) */
+ 0x00, /* REG_ARXL1_APGA_CTL (0x19) */
+ 0x00, /* REG_ARXR1_APGA_CTL (0x1A) */
+ 0x4b, /* REG_ARXL2_APGA_CTL (0x1B) */
+ 0x4b, /* REG_ARXR2_APGA_CTL (0x1C) */
+ 0x00, /* REG_ATX2ARXPGA (0x1D) */
+ 0x00, /* REG_BT_IF (0x1E) */
+ 0x00, /* REG_BTPGA (0x1F) */
+ 0x00, /* REG_BTSTPGA (0x20) */
+ 0x00, /* REG_EAR_CTL (0x21) */
+ 0x24, /* REG_HS_SEL (0x22) */
+ 0x0a, /* REG_HS_GAIN_SET (0x23) */
+ 0x00, /* REG_HS_POPN_SET (0x24) */
+ 0x00, /* REG_PREDL_CTL (0x25) */
+ 0x00, /* REG_PREDR_CTL (0x26) */
+ 0x00, /* REG_PRECKL_CTL (0x27) */
+ 0x00, /* REG_PRECKR_CTL (0x28) */
+ 0x00, /* REG_HFL_CTL (0x29) */
+ 0x00, /* REG_HFR_CTL (0x2A) */
+ 0x00, /* REG_ALC_CTL (0x2B) */
+ 0x00, /* REG_ALC_SET1 (0x2C) */
+ 0x00, /* REG_ALC_SET2 (0x2D) */
+ 0x00, /* REG_BOOST_CTL (0x2E) */
+ 0x00, /* REG_SOFTVOL_CTL (0x2F) */
+ 0x00, /* REG_DTMF_FREQSEL (0x30) */
+ 0x00, /* REG_DTMF_TONEXT1H (0x31) */
+ 0x00, /* REG_DTMF_TONEXT1L (0x32) */
+ 0x00, /* REG_DTMF_TONEXT2H (0x33) */
+ 0x00, /* REG_DTMF_TONEXT2L (0x34) */
+ 0x00, /* REG_DTMF_TONOFF (0x35) */
+ 0x00, /* REG_DTMF_WANONOFF (0x36) */
+ 0x00, /* REG_I2S_RX_SCRAMBLE_H (0x37) */
+ 0x00, /* REG_I2S_RX_SCRAMBLE_M (0x38) */
+ 0x00, /* REG_I2S_RX_SCRAMBLE_L (0x39) */
+ 0x16, /* REG_APLL_CTL (0x3A) */
+ 0x00, /* REG_DTMF_CTL (0x3B) */
+ 0x00, /* REG_DTMF_PGA_CTL2 (0x3C) */
+ 0x00, /* REG_DTMF_PGA_CTL1 (0x3D) */
+ 0x00, /* REG_MISC_SET_1 (0x3E) */
+ 0x00, /* REG_PCMBTMUX (0x3F) */
+ 0x00, /* not used (0x40) */
+ 0x00, /* not used (0x41) */
+ 0x00, /* not used (0x42) */
+ 0x00, /* REG_RX_PATH_SEL (0x43) */
+ 0x00, /* REG_VDL_APGA_CTL (0x44) */
+ 0x00, /* REG_VIBRA_CTL (0x45) */
+ 0x00, /* REG_VIBRA_SET (0x46) */
+ 0x00, /* REG_VIBRA_PWM_SET (0x47) */
+ 0x00, /* REG_ANAMIC_GAIN (0x48) */
+ 0x00, /* REG_MISC_SET_2 (0x49) */
+};
+
+/*
+ * read twl4030 register cache
+ */
+static inline unsigned int twl4030_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *cache = codec->reg_cache;
+
+ return cache[reg];
+}
+
+/*
+ * write twl4030 register cache
+ */
+static inline void twl4030_write_reg_cache(struct snd_soc_codec *codec,
+ u8 reg, u8 value)
+{
+ u8 *cache = codec->reg_cache;
+
+ if (reg >= TWL4030_CACHEREGNUM)
+ return;
+ cache[reg] = value;
+}
+
+/*
+ * write to the twl4030 register space
+ */
+static int twl4030_write(struct snd_soc_codec *codec,
+ unsigned int reg, unsigned int value)
+{
+ twl4030_write_reg_cache(codec, reg, value);
+ return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
+}
+
+static void twl4030_clear_codecpdz(struct snd_soc_codec *codec)
+{
+ u8 mode;
+
+ mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
+ twl4030_write(codec, TWL4030_REG_CODEC_MODE,
+ mode & ~TWL4030_CODECPDZ);
+
+ /* REVISIT: this delay is present in TI sample drivers */
+ /* but there seems to be no TRM requirement for it */
+ udelay(10);
+}
+
+static void twl4030_set_codecpdz(struct snd_soc_codec *codec)
+{
+ u8 mode;
+
+ mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
+ twl4030_write(codec, TWL4030_REG_CODEC_MODE,
+ mode | TWL4030_CODECPDZ);
+
+ /* REVISIT: this delay is present in TI sample drivers */
+ /* but there seems to be no TRM requirement for it */
+ udelay(10);
+}
+
+static void twl4030_init_chip(struct snd_soc_codec *codec)
+{
+ int i;
+
+ /* clear CODECPDZ prior to setting register defaults */
+ twl4030_clear_codecpdz(codec);
+
+ /* set all audio section registers to reasonable defaults */
+ for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
+ twl4030_write(codec, i, twl4030_reg[i]);
+
+}
+
+/* Earpiece */
+static const char *twl4030_earpiece_texts[] =
+ {"Off", "DACL1", "DACL2", "Invalid", "DACR1"};
+
+static const struct soc_enum twl4030_earpiece_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1,
+ ARRAY_SIZE(twl4030_earpiece_texts),
+ twl4030_earpiece_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_earpiece_control =
+SOC_DAPM_ENUM("Route", twl4030_earpiece_enum);
+
+/* PreDrive Left */
+static const char *twl4030_predrivel_texts[] =
+ {"Off", "DACL1", "DACL2", "Invalid", "DACR2"};
+
+static const struct soc_enum twl4030_predrivel_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1,
+ ARRAY_SIZE(twl4030_predrivel_texts),
+ twl4030_predrivel_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_predrivel_control =
+SOC_DAPM_ENUM("Route", twl4030_predrivel_enum);
+
+/* PreDrive Right */
+static const char *twl4030_predriver_texts[] =
+ {"Off", "DACR1", "DACR2", "Invalid", "DACL2"};
+
+static const struct soc_enum twl4030_predriver_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1,
+ ARRAY_SIZE(twl4030_predriver_texts),
+ twl4030_predriver_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_predriver_control =
+SOC_DAPM_ENUM("Route", twl4030_predriver_enum);
+
+/* Headset Left */
+static const char *twl4030_hsol_texts[] =
+ {"Off", "DACL1", "DACL2"};
+
+static const struct soc_enum twl4030_hsol_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1,
+ ARRAY_SIZE(twl4030_hsol_texts),
+ twl4030_hsol_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_hsol_control =
+SOC_DAPM_ENUM("Route", twl4030_hsol_enum);
+
+/* Headset Right */
+static const char *twl4030_hsor_texts[] =
+ {"Off", "DACR1", "DACR2"};
+
+static const struct soc_enum twl4030_hsor_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4,
+ ARRAY_SIZE(twl4030_hsor_texts),
+ twl4030_hsor_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
+SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
+
+/* Carkit Left */
+static const char *twl4030_carkitl_texts[] =
+ {"Off", "DACL1", "DACL2"};
+
+static const struct soc_enum twl4030_carkitl_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
+ ARRAY_SIZE(twl4030_carkitl_texts),
+ twl4030_carkitl_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
+SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
+
+/* Carkit Right */
+static const char *twl4030_carkitr_texts[] =
+ {"Off", "DACR1", "DACR2"};
+
+static const struct soc_enum twl4030_carkitr_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
+ ARRAY_SIZE(twl4030_carkitr_texts),
+ twl4030_carkitr_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
+SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
+
+/* Handsfree Left */
+static const char *twl4030_handsfreel_texts[] =
+ {"Voice", "DACL1", "DACL2", "DACR2"};
+
+static const struct soc_enum twl4030_handsfreel_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0,
+ ARRAY_SIZE(twl4030_handsfreel_texts),
+ twl4030_handsfreel_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control =
+SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum);
+
+/* Handsfree Right */
+static const char *twl4030_handsfreer_texts[] =
+ {"Voice", "DACR1", "DACR2", "DACL2"};
+
+static const struct soc_enum twl4030_handsfreer_enum =
+ SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0,
+ ARRAY_SIZE(twl4030_handsfreer_texts),
+ twl4030_handsfreer_texts);
+
+static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
+SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
+
+static int outmixer_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+ int ret = 0;
+ int val;
+
+ switch (e->reg) {
+ case TWL4030_REG_PREDL_CTL:
+ case TWL4030_REG_PREDR_CTL:
+ case TWL4030_REG_EAR_CTL:
+ val = w->value >> e->shift_l;
+ if (val == 3) {
+ printk(KERN_WARNING
+ "Invalid MUX setting for register 0x%02x (%d)\n",
+ e->reg, val);
+ ret = -1;
+ }
+ break;
+ }
+
+ return ret;
+}
+
+static int handsfree_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
+ unsigned char hs_ctl;
+
+ hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
+
+ if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
+ hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
+ twl4030_write(w->codec, e->reg, hs_ctl);
+ hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
+ twl4030_write(w->codec, e->reg, hs_ctl);
+ hs_ctl |= TWL4030_HF_CTL_HB_EN;
+ twl4030_write(w->codec, e->reg, hs_ctl);
+ } else {
+ hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
+ | TWL4030_HF_CTL_HB_EN);
+ twl4030_write(w->codec, e->reg, hs_ctl);
+ }
+
+ return 0;
+}
+
+/*
+ * Some of the gain controls in TWL (mostly those which are associated with
+ * the outputs) are implemented in an interesting way:
+ * 0x0 : Power down (mute)
+ * 0x1 : 6dB
+ * 0x2 : 0 dB
+ * 0x3 : -6 dB
+ * Inverting not going to help with these.
+ * Custom volsw and volsw_2r get/put functions to handle these gain bits.
+ */
+#define SOC_DOUBLE_TLV_TWL4030(xname, xreg, shift_left, shift_right, xmax,\
+ xinvert, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw, \
+ .get = snd_soc_get_volsw_twl4030, \
+ .put = snd_soc_put_volsw_twl4030, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = xreg, .shift = shift_left, .rshift = shift_right,\
+ .max = xmax, .invert = xinvert} }
+#define SOC_DOUBLE_R_TLV_TWL4030(xname, reg_left, reg_right, xshift, xmax,\
+ xinvert, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
+ SNDRV_CTL_ELEM_ACCESS_READWRITE,\
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw_2r, \
+ .get = snd_soc_get_volsw_r2_twl4030,\
+ .put = snd_soc_put_volsw_r2_twl4030, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .rshift = xshift, .max = xmax, .invert = xinvert} }
+#define SOC_SINGLE_TLV_TWL4030(xname, xreg, xshift, xmax, xinvert, tlv_array) \
+ SOC_DOUBLE_TLV_TWL4030(xname, xreg, xshift, xshift, xmax, \
+ xinvert, tlv_array)
+
+static int snd_soc_get_volsw_twl4030(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int rshift = mc->rshift;
+ int max = mc->max;
+ int mask = (1 << fls(max)) - 1;
+
+ ucontrol->value.integer.value[0] =
+ (snd_soc_read(codec, reg) >> shift) & mask;
+ if (ucontrol->value.integer.value[0])
+ ucontrol->value.integer.value[0] =
+ max + 1 - ucontrol->value.integer.value[0];
+
+ if (shift != rshift) {
+ ucontrol->value.integer.value[1] =
+ (snd_soc_read(codec, reg) >> rshift) & mask;
+ if (ucontrol->value.integer.value[1])
+ ucontrol->value.integer.value[1] =
+ max + 1 - ucontrol->value.integer.value[1];
+ }
+
+ return 0;
+}
+
+static int snd_soc_put_volsw_twl4030(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned int reg = mc->reg;
+ unsigned int shift = mc->shift;
+ unsigned int rshift = mc->rshift;
+ int max = mc->max;
+ int mask = (1 << fls(max)) - 1;
+ unsigned short val, val2, val_mask;
+
+ val = (ucontrol->value.integer.value[0] & mask);
+
+ val_mask = mask << shift;
+ if (val)
+ val = max + 1 - val;
+ val = val << shift;
+ if (shift != rshift) {
+ val2 = (ucontrol->value.integer.value[1] & mask);
+ val_mask |= mask << rshift;
+ if (val2)
+ val2 = max + 1 - val2;
+ val |= val2 << rshift;
+ }
+ return snd_soc_update_bits(codec, reg, val_mask, val);
+}
+
+static int snd_soc_get_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ int max = mc->max;
+ int mask = (1<<fls(max))-1;
+
+ ucontrol->value.integer.value[0] =
+ (snd_soc_read(codec, reg) >> shift) & mask;
+ ucontrol->value.integer.value[1] =
+ (snd_soc_read(codec, reg2) >> shift) & mask;
+
+ if (ucontrol->value.integer.value[0])
+ ucontrol->value.integer.value[0] =
+ max + 1 - ucontrol->value.integer.value[0];
+ if (ucontrol->value.integer.value[1])
+ ucontrol->value.integer.value[1] =
+ max + 1 - ucontrol->value.integer.value[1];
+
+ return 0;
+}
+
+static int snd_soc_put_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
+ unsigned int shift = mc->shift;
+ int max = mc->max;
+ int mask = (1 << fls(max)) - 1;
+ int err;
+ unsigned short val, val2, val_mask;
+
+ val_mask = mask << shift;
+ val = (ucontrol->value.integer.value[0] & mask);
+ val2 = (ucontrol->value.integer.value[1] & mask);
+
+ if (val)
+ val = max + 1 - val;
+ if (val2)
+ val2 = max + 1 - val2;
+
+ val = val << shift;
+ val2 = val2 << shift;
+
+ err = snd_soc_update_bits(codec, reg, val_mask, val);
+ if (err < 0)
+ return err;
+
+ err = snd_soc_update_bits(codec, reg2, val_mask, val2);
+ return err;
+}
+
+static int twl4030_get_left_input(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = kcontrol->private_data;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
+ int result = 0;
+
+ /* one bit must be set a time */
+ reg &= TWL4030_CKMIC_EN | TWL4030_AUXL_EN | TWL4030_HSMIC_EN
+ | TWL4030_MAINMIC_EN;
+ if (reg != 0) {
+ result++;
+ while ((reg & 1) == 0) {
+ result++;
+ reg >>= 1;
+ }
+ }
+
+ ucontrol->value.integer.value[0] = result;
+ return 0;
+}
+
+static int twl4030_put_left_input(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = kcontrol->private_data;
+ int value = ucontrol->value.integer.value[0];
+ u8 anamicl, micbias, avadc_ctl;
+
+ anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
+ anamicl &= ~(TWL4030_CKMIC_EN | TWL4030_AUXL_EN | TWL4030_HSMIC_EN
+ | TWL4030_MAINMIC_EN);
+ micbias = twl4030_read_reg_cache(codec, TWL4030_REG_MICBIAS_CTL);
+ micbias &= ~(TWL4030_HSMICBIAS_EN | TWL4030_MICBIAS1_EN);
+ avadc_ctl = twl4030_read_reg_cache(codec, TWL4030_REG_AVADC_CTL);
+
+ switch (value) {
+ case 1:
+ anamicl |= TWL4030_MAINMIC_EN;
+ micbias |= TWL4030_MICBIAS1_EN;
+ break;
+ case 2:
+ anamicl |= TWL4030_HSMIC_EN;
+ micbias |= TWL4030_HSMICBIAS_EN;
+ break;
+ case 3:
+ anamicl |= TWL4030_AUXL_EN;
+ break;
+ case 4:
+ anamicl |= TWL4030_CKMIC_EN;
+ break;
+ default:
+ break;
+ }
+
+ /* If some input is selected, enable amp and ADC */
+ if (value != 0) {
+ anamicl |= TWL4030_MICAMPL_EN;
+ avadc_ctl |= TWL4030_ADCL_EN;
+ } else {
+ anamicl &= ~TWL4030_MICAMPL_EN;
+ avadc_ctl &= ~TWL4030_ADCL_EN;
+ }
+
+ twl4030_write(codec, TWL4030_REG_ANAMICL, anamicl);
+ twl4030_write(codec, TWL4030_REG_MICBIAS_CTL, micbias);
+ twl4030_write(codec, TWL4030_REG_AVADC_CTL, avadc_ctl);
+
+ return 1;
+}
+
+static int twl4030_get_right_input(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = kcontrol->private_data;
+ u8 reg = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICR);
+ int value = 0;
+
+ reg &= TWL4030_SUBMIC_EN|TWL4030_AUXR_EN;
+ switch (reg) {
+ case TWL4030_SUBMIC_EN:
+ value = 1;
+ break;
+ case TWL4030_AUXR_EN:
+ value = 2;
+ break;
+ default:
+ break;
+ }
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int twl4030_put_right_input(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = kcontrol->private_data;
+ int value = ucontrol->value.integer.value[0];
+ u8 anamicr, micbias, avadc_ctl;
+
+ anamicr = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICR);
+ anamicr &= ~(TWL4030_SUBMIC_EN|TWL4030_AUXR_EN);
+ micbias = twl4030_read_reg_cache(codec, TWL4030_REG_MICBIAS_CTL);
+ micbias &= ~TWL4030_MICBIAS2_EN;
+ avadc_ctl = twl4030_read_reg_cache(codec, TWL4030_REG_AVADC_CTL);
+
+ switch (value) {
+ case 1:
+ anamicr |= TWL4030_SUBMIC_EN;
+ micbias |= TWL4030_MICBIAS2_EN;
+ break;
+ case 2:
+ anamicr |= TWL4030_AUXR_EN;
+ break;
+ default:
+ break;
+ }
+
+ if (value != 0) {
+ anamicr |= TWL4030_MICAMPR_EN;
+ avadc_ctl |= TWL4030_ADCR_EN;
+ } else {
+ anamicr &= ~TWL4030_MICAMPR_EN;
+ avadc_ctl &= ~TWL4030_ADCR_EN;
+ }
+
+ twl4030_write(codec, TWL4030_REG_ANAMICR, anamicr);
+ twl4030_write(codec, TWL4030_REG_MICBIAS_CTL, micbias);
+ twl4030_write(codec, TWL4030_REG_AVADC_CTL, avadc_ctl);
+
+ return 1;
+}
+
+static const char *twl4030_left_in_sel[] = {
+ "None",
+ "Main Mic",
+ "Headset Mic",
+ "Line In",
+ "Carkit Mic",
+};
+
+static const char *twl4030_right_in_sel[] = {
+ "None",
+ "Sub Mic",
+ "Line In",
+};
+
+static const struct soc_enum twl4030_left_input_mux =
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(twl4030_left_in_sel),
+ twl4030_left_in_sel);
+
+static const struct soc_enum twl4030_right_input_mux =
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(twl4030_right_in_sel),
+ twl4030_right_in_sel);
+
+/*
+ * FGAIN volume control:
+ * from -62 to 0 dB in 1 dB steps (mute instead of -63 dB)
+ */
+static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1);
+
+/*
+ * CGAIN volume control:
+ * 0 dB to 12 dB in 6 dB steps
+ * value 2 and 3 means 12 dB
+ */
+static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0);
+
+/*
+ * Analog playback gain
+ * -24 dB to 12 dB in 2 dB steps
+ */
+static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0);
+
+/*
+ * Gain controls tied to outputs
+ * -6 dB to 6 dB in 6 dB steps (mute instead of -12)
+ */
+static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
+
+/*
+ * Capture gain after the ADCs
+ * from 0 dB to 31 dB in 1 dB steps
+ */
+static DECLARE_TLV_DB_SCALE(digital_capture_tlv, 0, 100, 0);
+
+/*
+ * Gain control for input amplifiers
+ * 0 dB to 30 dB in 6 dB steps
+ */
+static DECLARE_TLV_DB_SCALE(input_gain_tlv, 0, 600, 0);
+
+static const struct snd_kcontrol_new twl4030_snd_controls[] = {
+ /* Common playback gain controls */
+ SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
+ TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
+ 0, 0x3f, 0, digital_fine_tlv),
+ SOC_DOUBLE_R_TLV("DAC2 Digital Fine Playback Volume",
+ TWL4030_REG_ARXL2PGA, TWL4030_REG_ARXR2PGA,
+ 0, 0x3f, 0, digital_fine_tlv),
+
+ SOC_DOUBLE_R_TLV("DAC1 Digital Coarse Playback Volume",
+ TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
+ 6, 0x2, 0, digital_coarse_tlv),
+ SOC_DOUBLE_R_TLV("DAC2 Digital Coarse Playback Volume",
+ TWL4030_REG_ARXL2PGA, TWL4030_REG_ARXR2PGA,
+ 6, 0x2, 0, digital_coarse_tlv),
+
+ SOC_DOUBLE_R_TLV("DAC1 Analog Playback Volume",
+ TWL4030_REG_ARXL1_APGA_CTL, TWL4030_REG_ARXR1_APGA_CTL,
+ 3, 0x12, 1, analog_tlv),
+ SOC_DOUBLE_R_TLV("DAC2 Analog Playback Volume",
+ TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
+ 3, 0x12, 1, analog_tlv),
+ SOC_DOUBLE_R("DAC1 Analog Playback Switch",
+ TWL4030_REG_ARXL1_APGA_CTL, TWL4030_REG_ARXR1_APGA_CTL,
+ 1, 1, 0),
+ SOC_DOUBLE_R("DAC2 Analog Playback Switch",
+ TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
+ 1, 1, 0),
+
+ /* Separate output gain controls */
+ SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
+ TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
+ 4, 3, 0, output_tvl),
+
+ SOC_DOUBLE_TLV_TWL4030("Headset Playback Volume",
+ TWL4030_REG_HS_GAIN_SET, 0, 2, 3, 0, output_tvl),
+
+ SOC_DOUBLE_R_TLV_TWL4030("Carkit Playback Volume",
+ TWL4030_REG_PRECKL_CTL, TWL4030_REG_PRECKR_CTL,
+ 4, 3, 0, output_tvl),
+
+ SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
+ TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+
+ /* Common capture gain controls */
+ SOC_DOUBLE_R_TLV("Capture Volume",
+ TWL4030_REG_ATXL1PGA, TWL4030_REG_ATXR1PGA,
+ 0, 0x1f, 0, digital_capture_tlv),
+
+ SOC_DOUBLE_TLV("Input Boost Volume", TWL4030_REG_ANAMIC_GAIN,
+ 0, 3, 5, 0, input_gain_tlv),
+
+ /* Input source controls */
+ SOC_ENUM_EXT("Left Input Source", twl4030_left_input_mux,
+ twl4030_get_left_input, twl4030_put_left_input),
+ SOC_ENUM_EXT("Right Input Source", twl4030_right_input_mux,
+ twl4030_get_right_input, twl4030_put_right_input),
+};
+
+/* add non dapm controls */
+static int twl4030_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&twl4030_snd_controls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
+ SND_SOC_DAPM_INPUT("INL"),
+ SND_SOC_DAPM_INPUT("INR"),
+
+ SND_SOC_DAPM_OUTPUT("OUTL"),
+ SND_SOC_DAPM_OUTPUT("OUTR"),
+ SND_SOC_DAPM_OUTPUT("EARPIECE"),
+ SND_SOC_DAPM_OUTPUT("PREDRIVEL"),
+ SND_SOC_DAPM_OUTPUT("PREDRIVER"),
+ SND_SOC_DAPM_OUTPUT("HSOL"),
+ SND_SOC_DAPM_OUTPUT("HSOR"),
+ SND_SOC_DAPM_OUTPUT("CARKITL"),
+ SND_SOC_DAPM_OUTPUT("CARKITR"),
+ SND_SOC_DAPM_OUTPUT("HFL"),
+ SND_SOC_DAPM_OUTPUT("HFR"),
+
+ /* DACs */
+ SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
+ TWL4030_REG_AVDAC_CTL, 0, 0),
+ SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback",
+ TWL4030_REG_AVDAC_CTL, 1, 0),
+ SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback",
+ TWL4030_REG_AVDAC_CTL, 2, 0),
+ SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback",
+ TWL4030_REG_AVDAC_CTL, 3, 0),
+
+ /* Analog PGAs */
+ SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL,
+ 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL,
+ 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL,
+ 0, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL,
+ 0, 0, NULL, 0),
+
+ /* Output MUX controls */
+ /* Earpiece */
+ SND_SOC_DAPM_MUX_E("Earpiece Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_earpiece_control, outmixer_event,
+ SND_SOC_DAPM_PRE_REG),
+ /* PreDrivL/R */
+ SND_SOC_DAPM_MUX_E("PredriveL Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_predrivel_control, outmixer_event,
+ SND_SOC_DAPM_PRE_REG),
+ SND_SOC_DAPM_MUX_E("PredriveR Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_predriver_control, outmixer_event,
+ SND_SOC_DAPM_PRE_REG),
+ /* HeadsetL/R */
+ SND_SOC_DAPM_MUX("HeadsetL Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_hsol_control),
+ SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_hsor_control),
+ /* CarkitL/R */
+ SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_carkitl_control),
+ SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
+ &twl4030_dapm_carkitr_control),
+ /* HandsfreeL/R */
+ SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
+ &twl4030_dapm_handsfreel_control, handsfree_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
+ &twl4030_dapm_handsfreer_control, handsfree_event,
+ SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
+
+ SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ {"ARXL1_APGA", NULL, "DAC Left1"},
+ {"ARXR1_APGA", NULL, "DAC Right1"},
+ {"ARXL2_APGA", NULL, "DAC Left2"},
+ {"ARXR2_APGA", NULL, "DAC Right2"},
+
+ /* Internal playback routings */
+ /* Earpiece */
+ {"Earpiece Mux", "DACL1", "ARXL1_APGA"},
+ {"Earpiece Mux", "DACL2", "ARXL2_APGA"},
+ {"Earpiece Mux", "DACR1", "ARXR1_APGA"},
+ /* PreDrivL */
+ {"PredriveL Mux", "DACL1", "ARXL1_APGA"},
+ {"PredriveL Mux", "DACL2", "ARXL2_APGA"},
+ {"PredriveL Mux", "DACR2", "ARXR2_APGA"},
+ /* PreDrivR */
+ {"PredriveR Mux", "DACR1", "ARXR1_APGA"},
+ {"PredriveR Mux", "DACR2", "ARXR2_APGA"},
+ {"PredriveR Mux", "DACL2", "ARXL2_APGA"},
+ /* HeadsetL */
+ {"HeadsetL Mux", "DACL1", "ARXL1_APGA"},
+ {"HeadsetL Mux", "DACL2", "ARXL2_APGA"},
+ /* HeadsetR */
+ {"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
+ {"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
+ /* CarkitL */
+ {"CarkitL Mux", "DACL1", "ARXL1_APGA"},
+ {"CarkitL Mux", "DACL2", "ARXL2_APGA"},
+ /* CarkitR */
+ {"CarkitR Mux", "DACR1", "ARXR1_APGA"},
+ {"CarkitR Mux", "DACR2", "ARXR2_APGA"},
+ /* HandsfreeL */
+ {"HandsfreeL Mux", "DACL1", "ARXL1_APGA"},
+ {"HandsfreeL Mux", "DACL2", "ARXL2_APGA"},
+ {"HandsfreeL Mux", "DACR2", "ARXR2_APGA"},
+ /* HandsfreeR */
+ {"HandsfreeR Mux", "DACR1", "ARXR1_APGA"},
+ {"HandsfreeR Mux", "DACR2", "ARXR2_APGA"},
+ {"HandsfreeR Mux", "DACL2", "ARXL2_APGA"},
+
+ /* outputs */
+ {"OUTL", NULL, "ARXL2_APGA"},
+ {"OUTR", NULL, "ARXR2_APGA"},
+ {"EARPIECE", NULL, "Earpiece Mux"},
+ {"PREDRIVEL", NULL, "PredriveL Mux"},
+ {"PREDRIVER", NULL, "PredriveR Mux"},
+ {"HSOL", NULL, "HeadsetL Mux"},
+ {"HSOR", NULL, "HeadsetR Mux"},
+ {"CARKITL", NULL, "CarkitL Mux"},
+ {"CARKITR", NULL, "CarkitR Mux"},
+ {"HFL", NULL, "HandsfreeL Mux"},
+ {"HFR", NULL, "HandsfreeR Mux"},
+
+ /* inputs */
+ {"ADCL", NULL, "INL"},
+ {"ADCR", NULL, "INR"},
+};
+
+static int twl4030_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, twl4030_dapm_widgets,
+ ARRAY_SIZE(twl4030_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_new_widgets(codec);
+ return 0;
+}
+
+static void twl4030_power_up(struct snd_soc_codec *codec)
+{
+ u8 anamicl, regmisc1, byte, popn;
+ int i = 0;
+
+ /* set CODECPDZ to turn on codec */
+ twl4030_set_codecpdz(codec);
+
+ /* initiate offset cancellation */
+ anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
+ twl4030_write(codec, TWL4030_REG_ANAMICL,
+ anamicl | TWL4030_CNCL_OFFSET_START);
+
+ /* wait for offset cancellation to complete */
+ do {
+ /* this takes a little while, so don't slam i2c */
+ udelay(2000);
+ twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte,
+ TWL4030_REG_ANAMICL);
+ } while ((i++ < 100) &&
+ ((byte & TWL4030_CNCL_OFFSET_START) ==
+ TWL4030_CNCL_OFFSET_START));
+
+ /* anti-pop when changing analog gain */
+ regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1);
+ twl4030_write(codec, TWL4030_REG_MISC_SET_1,
+ regmisc1 | TWL4030_SMOOTH_ANAVOL_EN);
+
+ /* toggle CODECPDZ as per TRM */
+ twl4030_clear_codecpdz(codec);
+ twl4030_set_codecpdz(codec);
+
+ /* program anti-pop with bias ramp delay */
+ popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+ popn &= TWL4030_RAMP_DELAY;
+ popn |= TWL4030_RAMP_DELAY_645MS;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
+ popn |= TWL4030_VMID_EN;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
+
+ /* enable anti-pop ramp */
+ popn |= TWL4030_RAMP_EN;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
+}
+
+static void twl4030_power_down(struct snd_soc_codec *codec)
+{
+ u8 popn;
+
+ /* disable anti-pop ramp */
+ popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
+ popn &= ~TWL4030_RAMP_EN;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
+
+ /* disable bias out */
+ popn &= ~TWL4030_VMID_EN;
+ twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
+
+ /* power down */
+ twl4030_clear_codecpdz(codec);
+}
+
+static int twl4030_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ twl4030_power_up(codec);
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ /* TODO: develop a twl4030_prepare function */
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ /* TODO: develop a twl4030_standby function */
+ twl4030_power_down(codec);
+ break;
+ case SND_SOC_BIAS_OFF:
+ twl4030_power_down(codec);
+ break;
+ }
+ codec->bias_level = level;
+
+ return 0;
+}
+
+static int twl4030_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ u8 mode, old_mode, format, old_format;
+
+
+ /* bit rate */
+ old_mode = twl4030_read_reg_cache(codec,
+ TWL4030_REG_CODEC_MODE) & ~TWL4030_CODECPDZ;
+ mode = old_mode & ~TWL4030_APLL_RATE;
+
+ switch (params_rate(params)) {
+ case 8000:
+ mode |= TWL4030_APLL_RATE_8000;
+ break;
+ case 11025:
+ mode |= TWL4030_APLL_RATE_11025;
+ break;
+ case 12000:
+ mode |= TWL4030_APLL_RATE_12000;
+ break;
+ case 16000:
+ mode |= TWL4030_APLL_RATE_16000;
+ break;
+ case 22050:
+ mode |= TWL4030_APLL_RATE_22050;
+ break;
+ case 24000:
+ mode |= TWL4030_APLL_RATE_24000;
+ break;
+ case 32000:
+ mode |= TWL4030_APLL_RATE_32000;
+ break;
+ case 44100:
+ mode |= TWL4030_APLL_RATE_44100;
+ break;
+ case 48000:
+ mode |= TWL4030_APLL_RATE_48000;
+ break;
+ default:
+ printk(KERN_ERR "TWL4030 hw params: unknown rate %d\n",
+ params_rate(params));
+ return -EINVAL;
+ }
+
+ if (mode != old_mode) {
+ /* change rate and set CODECPDZ */
+ twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
+ twl4030_set_codecpdz(codec);
+ }
+
+ /* sample size */
+ old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+ format = old_format;
+ format &= ~TWL4030_DATA_WIDTH;
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ format |= TWL4030_DATA_WIDTH_16S_16W;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ format |= TWL4030_DATA_WIDTH_32S_24W;
+ break;
+ default:
+ printk(KERN_ERR "TWL4030 hw params: unknown format %d\n",
+ params_format(params));
+ return -EINVAL;
+ }
+
+ if (format != old_format) {
+
+ /* clear CODECPDZ before changing format (codec requirement) */
+ twl4030_clear_codecpdz(codec);
+
+ /* change format */
+ twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+
+ /* set CODECPDZ afterwards */
+ twl4030_set_codecpdz(codec);
+ }
+ return 0;
+}
+
+static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u8 infreq;
+
+ switch (freq) {
+ case 19200000:
+ infreq = TWL4030_APLL_INFREQ_19200KHZ;
+ break;
+ case 26000000:
+ infreq = TWL4030_APLL_INFREQ_26000KHZ;
+ break;
+ case 38400000:
+ infreq = TWL4030_APLL_INFREQ_38400KHZ;
+ break;
+ default:
+ printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
+ freq);
+ return -EINVAL;
+ }
+
+ infreq |= TWL4030_APLL_EN;
+ twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
+
+ return 0;
+}
+
+static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u8 old_format, format;
+
+ /* get format */
+ old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
+ format = old_format;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ format &= ~(TWL4030_AIF_SLAVE_EN);
+ format &= ~(TWL4030_CLK256FS_EN);
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ format |= TWL4030_AIF_SLAVE_EN;
+ format |= TWL4030_CLK256FS_EN;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* interface format */
+ format &= ~TWL4030_AIF_FORMAT;
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ format |= TWL4030_AIF_FORMAT_CODEC;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (format != old_format) {
+
+ /* clear CODECPDZ before changing format (codec requirement) */
+ twl4030_clear_codecpdz(codec);
+
+ /* change format */
+ twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
+
+ /* set CODECPDZ afterwards */
+ twl4030_set_codecpdz(codec);
+ }
+
+ return 0;
+}
+
+#define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000)
+#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
+
+struct snd_soc_dai twl4030_dai = {
+ .name = "twl4030",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = TWL4030_RATES,
+ .formats = TWL4030_FORMATS,},
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = TWL4030_RATES,
+ .formats = TWL4030_FORMATS,},
+ .ops = {
+ .hw_params = twl4030_hw_params,
+ .set_sysclk = twl4030_set_dai_sysclk,
+ .set_fmt = twl4030_set_dai_fmt,
+ }
+};
+EXPORT_SYMBOL_GPL(twl4030_dai);
+
+static int twl4030_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int twl4030_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ twl4030_set_bias_level(codec, codec->suspend_bias_level);
+ return 0;
+}
+
+/*
+ * initialize the driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+
+static int twl4030_init(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret = 0;
+
+ printk(KERN_INFO "TWL4030 Audio Codec init \n");
+
+ codec->name = "twl4030";
+ codec->owner = THIS_MODULE;
+ codec->read = twl4030_read_reg_cache;
+ codec->write = twl4030_write;
+ codec->set_bias_level = twl4030_set_bias_level;
+ codec->dai = &twl4030_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = sizeof(twl4030_reg);
+ codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
+ GFP_KERNEL);
+ if (codec->reg_cache == NULL)
+ return -ENOMEM;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "twl4030: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ twl4030_init_chip(codec);
+
+ /* power on device */
+ twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ twl4030_add_controls(codec);
+ twl4030_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "twl4030: failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ kfree(codec->reg_cache);
+ return ret;
+}
+
+static struct snd_soc_device *twl4030_socdev;
+
+static int twl4030_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+
+ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (codec == NULL)
+ return -ENOMEM;
+
+ socdev->codec = codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ twl4030_socdev = socdev;
+ twl4030_init(socdev);
+
+ return 0;
+}
+
+static int twl4030_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ printk(KERN_INFO "TWL4030 Audio Codec remove\n");
+ kfree(codec);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_twl4030 = {
+ .probe = twl4030_probe,
+ .remove = twl4030_remove,
+ .suspend = twl4030_suspend,
+ .resume = twl4030_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
+
+static int __init twl4030_modinit(void)
+{
+ return snd_soc_register_dai(&twl4030_dai);
+}
+module_init(twl4030_modinit);
+
+static void __exit twl4030_exit(void)
+{
+ snd_soc_unregister_dai(&twl4030_dai);
+}
+module_exit(twl4030_exit);
+
+MODULE_DESCRIPTION("ASoC TWL4030 codec driver");
+MODULE_AUTHOR("Steve Sakoman");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ALSA SoC TWL4030 codec driver
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __TWL4030_AUDIO_H__
+#define __TWL4030_AUDIO_H__
+
+#define TWL4030_REG_CODEC_MODE 0x1
+#define TWL4030_REG_OPTION 0x2
+#define TWL4030_REG_UNKNOWN 0x3
+#define TWL4030_REG_MICBIAS_CTL 0x4
+#define TWL4030_REG_ANAMICL 0x5
+#define TWL4030_REG_ANAMICR 0x6
+#define TWL4030_REG_AVADC_CTL 0x7
+#define TWL4030_REG_ADCMICSEL 0x8
+#define TWL4030_REG_DIGMIXING 0x9
+#define TWL4030_REG_ATXL1PGA 0xA
+#define TWL4030_REG_ATXR1PGA 0xB
+#define TWL4030_REG_AVTXL2PGA 0xC
+#define TWL4030_REG_AVTXR2PGA 0xD
+#define TWL4030_REG_AUDIO_IF 0xE
+#define TWL4030_REG_VOICE_IF 0xF
+#define TWL4030_REG_ARXR1PGA 0x10
+#define TWL4030_REG_ARXL1PGA 0x11
+#define TWL4030_REG_ARXR2PGA 0x12
+#define TWL4030_REG_ARXL2PGA 0x13
+#define TWL4030_REG_VRXPGA 0x14
+#define TWL4030_REG_VSTPGA 0x15
+#define TWL4030_REG_VRX2ARXPGA 0x16
+#define TWL4030_REG_AVDAC_CTL 0x17
+#define TWL4030_REG_ARX2VTXPGA 0x18
+#define TWL4030_REG_ARXL1_APGA_CTL 0x19
+#define TWL4030_REG_ARXR1_APGA_CTL 0x1A
+#define TWL4030_REG_ARXL2_APGA_CTL 0x1B
+#define TWL4030_REG_ARXR2_APGA_CTL 0x1C
+#define TWL4030_REG_ATX2ARXPGA 0x1D
+#define TWL4030_REG_BT_IF 0x1E
+#define TWL4030_REG_BTPGA 0x1F
+#define TWL4030_REG_BTSTPGA 0x20
+#define TWL4030_REG_EAR_CTL 0x21
+#define TWL4030_REG_HS_SEL 0x22
+#define TWL4030_REG_HS_GAIN_SET 0x23
+#define TWL4030_REG_HS_POPN_SET 0x24
+#define TWL4030_REG_PREDL_CTL 0x25
+#define TWL4030_REG_PREDR_CTL 0x26
+#define TWL4030_REG_PRECKL_CTL 0x27
+#define TWL4030_REG_PRECKR_CTL 0x28
+#define TWL4030_REG_HFL_CTL 0x29
+#define TWL4030_REG_HFR_CTL 0x2A
+#define TWL4030_REG_ALC_CTL 0x2B
+#define TWL4030_REG_ALC_SET1 0x2C
+#define TWL4030_REG_ALC_SET2 0x2D
+#define TWL4030_REG_BOOST_CTL 0x2E
+#define TWL4030_REG_SOFTVOL_CTL 0x2F
+#define TWL4030_REG_DTMF_FREQSEL 0x30
+#define TWL4030_REG_DTMF_TONEXT1H 0x31
+#define TWL4030_REG_DTMF_TONEXT1L 0x32
+#define TWL4030_REG_DTMF_TONEXT2H 0x33
+#define TWL4030_REG_DTMF_TONEXT2L 0x34
+#define TWL4030_REG_DTMF_TONOFF 0x35
+#define TWL4030_REG_DTMF_WANONOFF 0x36
+#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37
+#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38
+#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39
+#define TWL4030_REG_APLL_CTL 0x3A
+#define TWL4030_REG_DTMF_CTL 0x3B
+#define TWL4030_REG_DTMF_PGA_CTL2 0x3C
+#define TWL4030_REG_DTMF_PGA_CTL1 0x3D
+#define TWL4030_REG_MISC_SET_1 0x3E
+#define TWL4030_REG_PCMBTMUX 0x3F
+#define TWL4030_REG_RX_PATH_SEL 0x43
+#define TWL4030_REG_VDL_APGA_CTL 0x44
+#define TWL4030_REG_VIBRA_CTL 0x45
+#define TWL4030_REG_VIBRA_SET 0x46
+#define TWL4030_REG_VIBRA_PWM_SET 0x47
+#define TWL4030_REG_ANAMIC_GAIN 0x48
+#define TWL4030_REG_MISC_SET_2 0x49
+
+#define TWL4030_CACHEREGNUM (TWL4030_REG_MISC_SET_2 + 1)
+
+/* Bitfield Definitions */
+
+/* TWL4030_CODEC_MODE (0x01) Fields */
+
+#define TWL4030_APLL_RATE 0xF0
+#define TWL4030_APLL_RATE_8000 0x00
+#define TWL4030_APLL_RATE_11025 0x10
+#define TWL4030_APLL_RATE_12000 0x20
+#define TWL4030_APLL_RATE_16000 0x40
+#define TWL4030_APLL_RATE_22050 0x50
+#define TWL4030_APLL_RATE_24000 0x60
+#define TWL4030_APLL_RATE_32000 0x80
+#define TWL4030_APLL_RATE_44100 0x90
+#define TWL4030_APLL_RATE_48000 0xA0
+#define TWL4030_SEL_16K 0x04
+#define TWL4030_CODECPDZ 0x02
+#define TWL4030_OPT_MODE 0x01
+
+/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
+
+#define TWL4030_MICBIAS2_CTL 0x40
+#define TWL4030_MICBIAS1_CTL 0x20
+#define TWL4030_HSMICBIAS_EN 0x04
+#define TWL4030_MICBIAS2_EN 0x02
+#define TWL4030_MICBIAS1_EN 0x01
+
+/* ANAMICL (0x05) Fields */
+
+#define TWL4030_CNCL_OFFSET_START 0x80
+#define TWL4030_OFFSET_CNCL_SEL 0x60
+#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00
+#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20
+#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40
+#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60
+#define TWL4030_MICAMPL_EN 0x10
+#define TWL4030_CKMIC_EN 0x08
+#define TWL4030_AUXL_EN 0x04
+#define TWL4030_HSMIC_EN 0x02
+#define TWL4030_MAINMIC_EN 0x01
+
+/* ANAMICR (0x06) Fields */
+
+#define TWL4030_MICAMPR_EN 0x10
+#define TWL4030_AUXR_EN 0x04
+#define TWL4030_SUBMIC_EN 0x01
+
+/* AVADC_CTL (0x07) Fields */
+
+#define TWL4030_ADCL_EN 0x08
+#define TWL4030_AVADC_CLK_PRIORITY 0x04
+#define TWL4030_ADCR_EN 0x02
+
+/* AUDIO_IF (0x0E) Fields */
+
+#define TWL4030_AIF_SLAVE_EN 0x80
+#define TWL4030_DATA_WIDTH 0x60
+#define TWL4030_DATA_WIDTH_16S_16W 0x00
+#define TWL4030_DATA_WIDTH_32S_16W 0x40
+#define TWL4030_DATA_WIDTH_32S_24W 0x60
+#define TWL4030_AIF_FORMAT 0x18
+#define TWL4030_AIF_FORMAT_CODEC 0x00
+#define TWL4030_AIF_FORMAT_LEFT 0x08
+#define TWL4030_AIF_FORMAT_RIGHT 0x10
+#define TWL4030_AIF_FORMAT_TDM 0x18
+#define TWL4030_AIF_TRI_EN 0x04
+#define TWL4030_CLK256FS_EN 0x02
+#define TWL4030_AIF_EN 0x01
+
+/* HS_GAIN_SET (0x23) Fields */
+
+#define TWL4030_HSR_GAIN 0x0C
+#define TWL4030_HSR_GAIN_PWR_DOWN 0x00
+#define TWL4030_HSR_GAIN_PLUS_6DB 0x04
+#define TWL4030_HSR_GAIN_0DB 0x08
+#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C
+#define TWL4030_HSL_GAIN 0x03
+#define TWL4030_HSL_GAIN_PWR_DOWN 0x00
+#define TWL4030_HSL_GAIN_PLUS_6DB 0x01
+#define TWL4030_HSL_GAIN_0DB 0x02
+#define TWL4030_HSL_GAIN_MINUS_6DB 0x03
+
+/* HS_POPN_SET (0x24) Fields */
+
+#define TWL4030_VMID_EN 0x40
+#define TWL4030_EXTMUTE 0x20
+#define TWL4030_RAMP_DELAY 0x1C
+#define TWL4030_RAMP_DELAY_20MS 0x00
+#define TWL4030_RAMP_DELAY_40MS 0x04
+#define TWL4030_RAMP_DELAY_81MS 0x08
+#define TWL4030_RAMP_DELAY_161MS 0x0C
+#define TWL4030_RAMP_DELAY_323MS 0x10
+#define TWL4030_RAMP_DELAY_645MS 0x14
+#define TWL4030_RAMP_DELAY_1291MS 0x18
+#define TWL4030_RAMP_DELAY_2581MS 0x1C
+#define TWL4030_RAMP_EN 0x02
+
+/* HFL_CTL (0x29, 0x2A) Fields */
+#define TWL4030_HF_CTL_HB_EN 0x04
+#define TWL4030_HF_CTL_LOOP_EN 0x08
+#define TWL4030_HF_CTL_RAMP_EN 0x10
+#define TWL4030_HF_CTL_REF_EN 0x20
+
+/* APLL_CTL (0x3A) Fields */
+
+#define TWL4030_APLL_EN 0x10
+#define TWL4030_APLL_INFREQ 0x0F
+#define TWL4030_APLL_INFREQ_19200KHZ 0x05
+#define TWL4030_APLL_INFREQ_26000KHZ 0x06
+#define TWL4030_APLL_INFREQ_38400KHZ 0x0F
+
+/* REG_MISC_SET_1 (0x3E) Fields */
+
+#define TWL4030_CLK64_EN 0x80
+#define TWL4030_SCRAMBLE_EN 0x40
+#define TWL4030_FMLOOP_EN 0x20
+#define TWL4030_SMOOTH_ANAVOL_EN 0x02
+#define TWL4030_DIGMIC_LR_SWAP_EN 0x01
+
+extern struct snd_soc_dai twl4030_dai;
+extern struct snd_soc_codec_device soc_codec_dev_twl4030;
+
+#endif /* End of __TWL4030_AUDIO_H__ */
--- /dev/null
+/*
+ * uda134x.c -- UDA134X ALSA SoC Codec driver
+ *
+ * Modifications by Christian Pellegrin <chripell@evolware.org>
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * Based on the WM87xx drivers by Liam Girdwood and Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+
+#include <sound/uda134x.h>
+#include <sound/l3.h>
+
+#include "uda134x.h"
+
+
+#define POWER_OFF_ON_STANDBY 1
+/*
+ ALSA SOC usually puts the device in standby mode when it's not used
+ for sometime. If you define POWER_OFF_ON_STANDBY the driver will
+ turn off the ADC/DAC when this callback is invoked and turn it back
+ on when needed. Unfortunately this will result in a very light bump
+ (it can be audible only with good earphones). If this bothers you
+ just comment this line, you will have slightly higher power
+ consumption . Please note that sending the L3 command for ADC is
+ enough to make the bump, so it doesn't make difference if you
+ completely take off power from the codec.
+ */
+
+#define UDA134X_RATES SNDRV_PCM_RATE_8000_48000
+#define UDA134X_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE)
+
+struct uda134x_priv {
+ int sysclk;
+ int dai_fmt;
+
+ struct snd_pcm_substream *master_substream;
+ struct snd_pcm_substream *slave_substream;
+};
+
+/* In-data addresses are hard-coded into the reg-cache values */
+static const char uda134x_reg[UDA134X_REGS_NUM] = {
+ /* Extended address registers */
+ 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00,
+ /* Status, data regs */
+ 0x00, 0x83, 0x00, 0x40, 0x80, 0x00,
+};
+
+/*
+ * The codec has no support for reading its registers except for peak level...
+ */
+static inline unsigned int uda134x_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u8 *cache = codec->reg_cache;
+
+ if (reg >= UDA134X_REGS_NUM)
+ return -1;
+ return cache[reg];
+}
+
+/*
+ * Write the register cache
+ */
+static inline void uda134x_write_reg_cache(struct snd_soc_codec *codec,
+ u8 reg, unsigned int value)
+{
+ u8 *cache = codec->reg_cache;
+
+ if (reg >= UDA134X_REGS_NUM)
+ return;
+ cache[reg] = value;
+}
+
+/*
+ * Write to the uda134x registers
+ *
+ */
+static int uda134x_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ int ret;
+ u8 addr;
+ u8 data = value;
+ struct uda134x_platform_data *pd = codec->control_data;
+
+ pr_debug("%s reg: %02X, value:%02X\n", __func__, reg, value);
+
+ if (reg >= UDA134X_REGS_NUM) {
+ printk(KERN_ERR "%s unkown register: reg: %d",
+ __func__, reg);
+ return -EINVAL;
+ }
+
+ uda134x_write_reg_cache(codec, reg, value);
+
+ switch (reg) {
+ case UDA134X_STATUS0:
+ case UDA134X_STATUS1:
+ addr = UDA134X_STATUS_ADDR;
+ break;
+ case UDA134X_DATA000:
+ case UDA134X_DATA001:
+ case UDA134X_DATA010:
+ addr = UDA134X_DATA0_ADDR;
+ break;
+ case UDA134X_DATA1:
+ addr = UDA134X_DATA1_ADDR;
+ break;
+ default:
+ /* It's an extended address register */
+ addr = (reg | UDA134X_EXTADDR_PREFIX);
+
+ ret = l3_write(&pd->l3,
+ UDA134X_DATA0_ADDR, &addr, 1);
+ if (ret != 1)
+ return -EIO;
+
+ addr = UDA134X_DATA0_ADDR;
+ data = (value | UDA134X_EXTDATA_PREFIX);
+ break;
+ }
+
+ ret = l3_write(&pd->l3,
+ addr, &data, 1);
+ if (ret != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static inline void uda134x_reset(struct snd_soc_codec *codec)
+{
+ u8 reset_reg = uda134x_read_reg_cache(codec, UDA134X_STATUS0);
+ uda134x_write(codec, UDA134X_STATUS0, reset_reg | (1<<6));
+ msleep(1);
+ uda134x_write(codec, UDA134X_STATUS0, reset_reg & ~(1<<6));
+}
+
+static int uda134x_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u8 mute_reg = uda134x_read_reg_cache(codec, UDA134X_DATA010);
+
+ pr_debug("%s mute: %d\n", __func__, mute);
+
+ if (mute)
+ mute_reg |= (1<<2);
+ else
+ mute_reg &= ~(1<<2);
+
+ uda134x_write(codec, UDA134X_DATA010, mute_reg & ~(1<<2));
+
+ return 0;
+}
+
+static int uda134x_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct uda134x_priv *uda134x = codec->private_data;
+ struct snd_pcm_runtime *master_runtime;
+
+ if (uda134x->master_substream) {
+ master_runtime = uda134x->master_substream->runtime;
+
+ pr_debug("%s constraining to %d bits at %d\n", __func__,
+ master_runtime->sample_bits,
+ master_runtime->rate);
+
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_RATE,
+ master_runtime->rate,
+ master_runtime->rate);
+
+ snd_pcm_hw_constraint_minmax(substream->runtime,
+ SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+ master_runtime->sample_bits,
+ master_runtime->sample_bits);
+
+ uda134x->slave_substream = substream;
+ } else
+ uda134x->master_substream = substream;
+
+ return 0;
+}
+
+static void uda134x_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct uda134x_priv *uda134x = codec->private_data;
+
+ if (uda134x->master_substream == substream)
+ uda134x->master_substream = uda134x->slave_substream;
+
+ uda134x->slave_substream = NULL;
+}
+
+static int uda134x_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ struct uda134x_priv *uda134x = codec->private_data;
+ u8 hw_params;
+
+ if (substream == uda134x->slave_substream) {
+ pr_debug("%s ignoring hw_params for slave substream\n",
+ __func__);
+ return 0;
+ }
+
+ hw_params = uda134x_read_reg_cache(codec, UDA134X_STATUS0);
+ hw_params &= STATUS0_SYSCLK_MASK;
+ hw_params &= STATUS0_DAIFMT_MASK;
+
+ pr_debug("%s sysclk: %d, rate:%d\n", __func__,
+ uda134x->sysclk, params_rate(params));
+
+ /* set SYSCLK / fs ratio */
+ switch (uda134x->sysclk / params_rate(params)) {
+ case 512:
+ break;
+ case 384:
+ hw_params |= (1<<4);
+ break;
+ case 256:
+ hw_params |= (1<<5);
+ break;
+ default:
+ printk(KERN_ERR "%s unsupported fs\n", __func__);
+ return -EINVAL;
+ }
+
+ pr_debug("%s dai_fmt: %d, params_format:%d\n", __func__,
+ uda134x->dai_fmt, params_format(params));
+
+ /* set DAI format and word length */
+ switch (uda134x->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ hw_params |= (1<<1);
+ break;
+ case SNDRV_PCM_FORMAT_S18_3LE:
+ hw_params |= (1<<2);
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ hw_params |= ((1<<2) | (1<<1));
+ break;
+ default:
+ printk(KERN_ERR "%s unsupported format (right)\n",
+ __func__);
+ return -EINVAL;
+ }
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ hw_params |= (1<<3);
+ break;
+ default:
+ printk(KERN_ERR "%s unsupported format\n", __func__);
+ return -EINVAL;
+ }
+
+ uda134x_write(codec, UDA134X_STATUS0, hw_params);
+
+ return 0;
+}
+
+static int uda134x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct uda134x_priv *uda134x = codec->private_data;
+
+ pr_debug("%s clk_id: %d, freq: %d, dir: %d\n", __func__,
+ clk_id, freq, dir);
+
+ /* Anything between 256fs*8Khz and 512fs*48Khz should be acceptable
+ because the codec is slave. Of course limitations of the clock
+ master (the IIS controller) apply.
+ We'll error out on set_hw_params if it's not OK */
+ if ((freq >= (256 * 8000)) && (freq <= (512 * 48000))) {
+ uda134x->sysclk = freq;
+ return 0;
+ }
+
+ printk(KERN_ERR "%s unsupported sysclk\n", __func__);
+ return -EINVAL;
+}
+
+static int uda134x_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct uda134x_priv *uda134x = codec->private_data;
+
+ pr_debug("%s fmt: %08X\n", __func__, fmt);
+
+ /* codec supports only full slave mode */
+ if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) != SND_SOC_DAIFMT_CBS_CFS) {
+ printk(KERN_ERR "%s unsupported slave mode\n", __func__);
+ return -EINVAL;
+ }
+
+ /* no support for clock inversion */
+ if ((fmt & SND_SOC_DAIFMT_INV_MASK) != SND_SOC_DAIFMT_NB_NF) {
+ printk(KERN_ERR "%s unsupported clock inversion\n", __func__);
+ return -EINVAL;
+ }
+
+ /* We can't setup DAI format here as it depends on the word bit num */
+ /* so let's just store the value for later */
+ uda134x->dai_fmt = fmt;
+
+ return 0;
+}
+
+static int uda134x_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u8 reg;
+ struct uda134x_platform_data *pd = codec->control_data;
+ int i;
+ u8 *cache = codec->reg_cache;
+
+ pr_debug("%s bias level %d\n", __func__, level);
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ /* ADC, DAC on */
+ reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
+ uda134x_write(codec, UDA134X_STATUS1, reg | 0x03);
+ break;
+ case SND_SOC_BIAS_PREPARE:
+ /* power on */
+ if (pd->power) {
+ pd->power(1);
+ /* Sync reg_cache with the hardware */
+ for (i = 0; i < ARRAY_SIZE(uda134x_reg); i++)
+ codec->write(codec, i, *cache++);
+ }
+ break;
+ case SND_SOC_BIAS_STANDBY:
+ /* ADC, DAC power off */
+ reg = uda134x_read_reg_cache(codec, UDA134X_STATUS1);
+ uda134x_write(codec, UDA134X_STATUS1, reg & ~(0x03));
+ break;
+ case SND_SOC_BIAS_OFF:
+ /* power off */
+ if (pd->power)
+ pd->power(0);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+static const char *uda134x_dsp_setting[] = {"Flat", "Minimum1",
+ "Minimum2", "Maximum"};
+static const char *uda134x_deemph[] = {"None", "32Khz", "44.1Khz", "48Khz"};
+static const char *uda134x_mixmode[] = {"Differential", "Analog1",
+ "Analog2", "Both"};
+
+static const struct soc_enum uda134x_mixer_enum[] = {
+SOC_ENUM_SINGLE(UDA134X_DATA010, 0, 0x04, uda134x_dsp_setting),
+SOC_ENUM_SINGLE(UDA134X_DATA010, 3, 0x04, uda134x_deemph),
+SOC_ENUM_SINGLE(UDA134X_EA010, 0, 0x04, uda134x_mixmode),
+};
+
+static const struct snd_kcontrol_new uda1341_snd_controls[] = {
+SOC_SINGLE("Master Playback Volume", UDA134X_DATA000, 0, 0x3F, 1),
+SOC_SINGLE("Capture Volume", UDA134X_EA010, 2, 0x07, 0),
+SOC_SINGLE("Analog1 Volume", UDA134X_EA000, 0, 0x1F, 1),
+SOC_SINGLE("Analog2 Volume", UDA134X_EA001, 0, 0x1F, 1),
+
+SOC_SINGLE("Mic Sensitivity", UDA134X_EA010, 2, 7, 0),
+SOC_SINGLE("Mic Volume", UDA134X_EA101, 0, 0x1F, 0),
+
+SOC_SINGLE("Tone Control - Bass", UDA134X_DATA001, 2, 0xF, 0),
+SOC_SINGLE("Tone Control - Treble", UDA134X_DATA001, 0, 3, 0),
+
+SOC_ENUM("Sound Processing Filter", uda134x_mixer_enum[0]),
+SOC_ENUM("PCM Playback De-emphasis", uda134x_mixer_enum[1]),
+SOC_ENUM("Input Mux", uda134x_mixer_enum[2]),
+
+SOC_SINGLE("AGC Switch", UDA134X_EA100, 4, 1, 0),
+SOC_SINGLE("AGC Target Volume", UDA134X_EA110, 0, 0x03, 1),
+SOC_SINGLE("AGC Timing", UDA134X_EA110, 2, 0x07, 0),
+
+SOC_SINGLE("DAC +6dB Switch", UDA134X_STATUS1, 6, 1, 0),
+SOC_SINGLE("ADC +6dB Switch", UDA134X_STATUS1, 5, 1, 0),
+SOC_SINGLE("ADC Polarity Switch", UDA134X_STATUS1, 4, 1, 0),
+SOC_SINGLE("DAC Polarity Switch", UDA134X_STATUS1, 3, 1, 0),
+SOC_SINGLE("Double Speed Playback Switch", UDA134X_STATUS1, 2, 1, 0),
+SOC_SINGLE("DC Filter Enable Switch", UDA134X_STATUS0, 0, 1, 0),
+};
+
+static const struct snd_kcontrol_new uda1340_snd_controls[] = {
+SOC_SINGLE("Master Playback Volume", UDA134X_DATA000, 0, 0x3F, 1),
+
+SOC_SINGLE("Tone Control - Bass", UDA134X_DATA001, 2, 0xF, 0),
+SOC_SINGLE("Tone Control - Treble", UDA134X_DATA001, 0, 3, 0),
+
+SOC_ENUM("Sound Processing Filter", uda134x_mixer_enum[0]),
+SOC_ENUM("PCM Playback De-emphasis", uda134x_mixer_enum[1]),
+
+SOC_SINGLE("DC Filter Enable Switch", UDA134X_STATUS0, 0, 1, 0),
+};
+
+static int uda134x_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i, n;
+ const struct snd_kcontrol_new *ctrls;
+ struct uda134x_platform_data *pd = codec->control_data;
+
+ switch (pd->model) {
+ case UDA134X_UDA1340:
+ case UDA134X_UDA1344:
+ n = ARRAY_SIZE(uda1340_snd_controls);
+ ctrls = uda1340_snd_controls;
+ break;
+ case UDA134X_UDA1341:
+ n = ARRAY_SIZE(uda1341_snd_controls);
+ ctrls = uda1341_snd_controls;
+ break;
+ default:
+ printk(KERN_ERR "%s unkown codec type: %d",
+ __func__, pd->model);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < n; i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&ctrls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+struct snd_soc_dai uda134x_dai = {
+ .name = "UDA134X",
+ /* playback capabilities */
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = UDA134X_RATES,
+ .formats = UDA134X_FORMATS,
+ },
+ /* capture capabilities */
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = UDA134X_RATES,
+ .formats = UDA134X_FORMATS,
+ },
+ /* pcm operations */
+ .ops = {
+ .startup = uda134x_startup,
+ .shutdown = uda134x_shutdown,
+ .hw_params = uda134x_hw_params,
+ .digital_mute = uda134x_mute,
+ .set_sysclk = uda134x_set_dai_sysclk,
+ .set_fmt = uda134x_set_dai_fmt,
+ }
+};
+EXPORT_SYMBOL(uda134x_dai);
+
+
+static int uda134x_soc_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct uda134x_priv *uda134x;
+ void *codec_setup_data = socdev->codec_data;
+ int ret = -ENOMEM;
+ struct uda134x_platform_data *pd;
+
+ printk(KERN_INFO "UDA134X SoC Audio Codec\n");
+
+ if (!codec_setup_data) {
+ printk(KERN_ERR "UDA134X SoC codec: "
+ "missing L3 bitbang function\n");
+ return -ENODEV;
+ }
+
+ pd = codec_setup_data;
+ switch (pd->model) {
+ case UDA134X_UDA1340:
+ case UDA134X_UDA1341:
+ case UDA134X_UDA1344:
+ break;
+ default:
+ printk(KERN_ERR "UDA134X SoC codec: "
+ "unsupported model %d\n",
+ pd->model);
+ return -EINVAL;
+ }
+
+ socdev->codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (socdev->codec == NULL)
+ return ret;
+
+ codec = socdev->codec;
+
+ uda134x = kzalloc(sizeof(struct uda134x_priv), GFP_KERNEL);
+ if (uda134x == NULL)
+ goto priv_err;
+ codec->private_data = uda134x;
+
+ codec->reg_cache = kmemdup(uda134x_reg, sizeof(uda134x_reg),
+ GFP_KERNEL);
+ if (codec->reg_cache == NULL)
+ goto reg_err;
+
+ mutex_init(&codec->mutex);
+
+ codec->reg_cache_size = sizeof(uda134x_reg);
+ codec->reg_cache_step = 1;
+
+ codec->name = "UDA134X";
+ codec->owner = THIS_MODULE;
+ codec->dai = &uda134x_dai;
+ codec->num_dai = 1;
+ codec->read = uda134x_read_reg_cache;
+ codec->write = uda134x_write;
+#ifdef POWER_OFF_ON_STANDBY
+ codec->set_bias_level = uda134x_set_bias_level;
+#endif
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->control_data = codec_setup_data;
+
+ if (pd->power)
+ pd->power(1);
+
+ uda134x_reset(codec);
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "UDA134X: failed to register pcms\n");
+ goto pcm_err;
+ }
+
+ ret = uda134x_add_controls(codec);
+ if (ret < 0) {
+ printk(KERN_ERR "UDA134X: failed to register controls\n");
+ goto pcm_err;
+ }
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "UDA134X: failed to register card\n");
+ goto card_err;
+ }
+
+ return 0;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ kfree(codec->reg_cache);
+reg_err:
+ kfree(codec->private_data);
+priv_err:
+ kfree(codec);
+ return ret;
+}
+
+/* power down chip */
+static int uda134x_soc_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+
+ kfree(codec->private_data);
+ kfree(codec->reg_cache);
+ kfree(codec);
+
+ return 0;
+}
+
+#if defined(CONFIG_PM)
+static int uda134x_soc_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int uda134x_soc_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_PREPARE);
+ uda134x_set_bias_level(codec, SND_SOC_BIAS_ON);
+ return 0;
+}
+#else
+#define uda134x_soc_suspend NULL
+#define uda134x_soc_resume NULL
+#endif /* CONFIG_PM */
+
+struct snd_soc_codec_device soc_codec_dev_uda134x = {
+ .probe = uda134x_soc_probe,
+ .remove = uda134x_soc_remove,
+ .suspend = uda134x_soc_suspend,
+ .resume = uda134x_soc_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_uda134x);
+
+static int __init uda134x_init(void)
+{
+ return snd_soc_register_dai(&uda134x_dai);
+}
+module_init(uda134x_init);
+
+static void __exit uda134x_exit(void)
+{
+ snd_soc_unregister_dai(&uda134x_dai);
+}
+module_exit(uda134x_exit);
+
+MODULE_DESCRIPTION("UDA134X ALSA soc codec driver");
+MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef _UDA134X_CODEC_H
+#define _UDA134X_CODEC_H
+
+#define UDA134X_L3ADDR 5
+#define UDA134X_DATA0_ADDR ((UDA134X_L3ADDR << 2) | 0)
+#define UDA134X_DATA1_ADDR ((UDA134X_L3ADDR << 2) | 1)
+#define UDA134X_STATUS_ADDR ((UDA134X_L3ADDR << 2) | 2)
+
+#define UDA134X_EXTADDR_PREFIX 0xC0
+#define UDA134X_EXTDATA_PREFIX 0xE0
+
+/* UDA134X registers */
+#define UDA134X_EA000 0
+#define UDA134X_EA001 1
+#define UDA134X_EA010 2
+#define UDA134X_EA011 3
+#define UDA134X_EA100 4
+#define UDA134X_EA101 5
+#define UDA134X_EA110 6
+#define UDA134X_EA111 7
+#define UDA134X_STATUS0 8
+#define UDA134X_STATUS1 9
+#define UDA134X_DATA000 10
+#define UDA134X_DATA001 11
+#define UDA134X_DATA010 12
+#define UDA134X_DATA1 13
+
+#define UDA134X_REGS_NUM 14
+
+#define STATUS0_DAIFMT_MASK (~(7<<1))
+#define STATUS0_SYSCLK_MASK (~(3<<4))
+
+extern struct snd_soc_dai uda134x_dai;
+extern struct snd_soc_codec_device soc_codec_dev_uda134x;
+
+#endif
* when the DAI is being clocked by the CPU DAI. It's up to the
* machine and cpu DAI driver to do this before we are called.
*/
-static int uda1380_pcm_prepare(struct snd_pcm_substream *substream)
+static int uda1380_pcm_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
}
static int uda1380_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static void uda1380_pcm_shutdown(struct snd_pcm_substream *substream)
+static void uda1380_pcm_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.hw_params = uda1380_pcm_hw_params,
.shutdown = uda1380_pcm_shutdown,
.prepare = uda1380_pcm_prepare,
- },
- .dai_ops = {
.digital_mute = uda1380_mute,
.set_fmt = uda1380_set_dai_fmt,
},
.hw_params = uda1380_pcm_hw_params,
.shutdown = uda1380_pcm_shutdown,
.prepare = uda1380_pcm_prepare,
- },
- .dai_ops = {
.digital_mute = uda1380_mute,
.set_fmt = uda1380_set_dai_fmt,
},
.hw_params = uda1380_pcm_hw_params,
.shutdown = uda1380_pcm_shutdown,
.prepare = uda1380_pcm_prepare,
- },
- .dai_ops = {
.set_fmt = uda1380_set_dai_fmt,
},
},
/* uda1380 init */
uda1380_add_controls(codec);
uda1380_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
pr_err("uda1380: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_uda1380);
+static int __init uda1380_modinit(void)
+{
+ return snd_soc_register_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+}
+module_init(uda1380_modinit);
+
+static void __exit uda1380_exit(void)
+{
+ snd_soc_unregister_dais(uda1380_dai, ARRAY_SIZE(uda1380_dai));
+}
+module_exit(uda1380_exit);
+
MODULE_AUTHOR("Giorgio Padrin");
MODULE_DESCRIPTION("Audio support for codec Philips UDA1380");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8350.c -- WM8350 ALSA SoC audio driver
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/regulator/consumer.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8350.h"
+
+#define WM8350_OUTn_0dB 0x39
+
+#define WM8350_RAMP_NONE 0
+#define WM8350_RAMP_UP 1
+#define WM8350_RAMP_DOWN 2
+
+/* We only include the analogue supplies here; the digital supplies
+ * need to be available well before this driver can be probed.
+ */
+static const char *supply_names[] = {
+ "AVDD",
+ "HPVDD",
+};
+
+struct wm8350_output {
+ u16 active;
+ u16 left_vol;
+ u16 right_vol;
+ u16 ramp;
+ u16 mute;
+};
+
+struct wm8350_data {
+ struct snd_soc_codec codec;
+ struct wm8350_output out1;
+ struct wm8350_output out2;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+};
+
+static unsigned int wm8350_codec_cache_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ struct wm8350 *wm8350 = codec->control_data;
+ return wm8350->reg_cache[reg];
+}
+
+static unsigned int wm8350_codec_read(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ struct wm8350 *wm8350 = codec->control_data;
+ return wm8350_reg_read(wm8350, reg);
+}
+
+static int wm8350_codec_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ struct wm8350 *wm8350 = codec->control_data;
+ return wm8350_reg_write(wm8350, reg, value);
+}
+
+/*
+ * Ramp OUT1 PGA volume to minimise pops at stream startup and shutdown.
+ */
+static inline int wm8350_out1_ramp_step(struct snd_soc_codec *codec)
+{
+ struct wm8350_data *wm8350_data = codec->private_data;
+ struct wm8350_output *out1 = &wm8350_data->out1;
+ struct wm8350 *wm8350 = codec->control_data;
+ int left_complete = 0, right_complete = 0;
+ u16 reg, val;
+
+ /* left channel */
+ reg = wm8350_reg_read(wm8350, WM8350_LOUT1_VOLUME);
+ val = (reg & WM8350_OUT1L_VOL_MASK) >> WM8350_OUT1L_VOL_SHIFT;
+
+ if (out1->ramp == WM8350_RAMP_UP) {
+ /* ramp step up */
+ if (val < out1->left_vol) {
+ val++;
+ reg &= ~WM8350_OUT1L_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_LOUT1_VOLUME,
+ reg | (val << WM8350_OUT1L_VOL_SHIFT));
+ } else
+ left_complete = 1;
+ } else if (out1->ramp == WM8350_RAMP_DOWN) {
+ /* ramp step down */
+ if (val > 0) {
+ val--;
+ reg &= ~WM8350_OUT1L_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_LOUT1_VOLUME,
+ reg | (val << WM8350_OUT1L_VOL_SHIFT));
+ } else
+ left_complete = 1;
+ } else
+ return 1;
+
+ /* right channel */
+ reg = wm8350_reg_read(wm8350, WM8350_ROUT1_VOLUME);
+ val = (reg & WM8350_OUT1R_VOL_MASK) >> WM8350_OUT1R_VOL_SHIFT;
+ if (out1->ramp == WM8350_RAMP_UP) {
+ /* ramp step up */
+ if (val < out1->right_vol) {
+ val++;
+ reg &= ~WM8350_OUT1R_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_ROUT1_VOLUME,
+ reg | (val << WM8350_OUT1R_VOL_SHIFT));
+ } else
+ right_complete = 1;
+ } else if (out1->ramp == WM8350_RAMP_DOWN) {
+ /* ramp step down */
+ if (val > 0) {
+ val--;
+ reg &= ~WM8350_OUT1R_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_ROUT1_VOLUME,
+ reg | (val << WM8350_OUT1R_VOL_SHIFT));
+ } else
+ right_complete = 1;
+ }
+
+ /* only hit the update bit if either volume has changed this step */
+ if (!left_complete || !right_complete)
+ wm8350_set_bits(wm8350, WM8350_LOUT1_VOLUME, WM8350_OUT1_VU);
+
+ return left_complete & right_complete;
+}
+
+/*
+ * Ramp OUT2 PGA volume to minimise pops at stream startup and shutdown.
+ */
+static inline int wm8350_out2_ramp_step(struct snd_soc_codec *codec)
+{
+ struct wm8350_data *wm8350_data = codec->private_data;
+ struct wm8350_output *out2 = &wm8350_data->out2;
+ struct wm8350 *wm8350 = codec->control_data;
+ int left_complete = 0, right_complete = 0;
+ u16 reg, val;
+
+ /* left channel */
+ reg = wm8350_reg_read(wm8350, WM8350_LOUT2_VOLUME);
+ val = (reg & WM8350_OUT2L_VOL_MASK) >> WM8350_OUT1L_VOL_SHIFT;
+ if (out2->ramp == WM8350_RAMP_UP) {
+ /* ramp step up */
+ if (val < out2->left_vol) {
+ val++;
+ reg &= ~WM8350_OUT2L_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_LOUT2_VOLUME,
+ reg | (val << WM8350_OUT1L_VOL_SHIFT));
+ } else
+ left_complete = 1;
+ } else if (out2->ramp == WM8350_RAMP_DOWN) {
+ /* ramp step down */
+ if (val > 0) {
+ val--;
+ reg &= ~WM8350_OUT2L_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_LOUT2_VOLUME,
+ reg | (val << WM8350_OUT1L_VOL_SHIFT));
+ } else
+ left_complete = 1;
+ } else
+ return 1;
+
+ /* right channel */
+ reg = wm8350_reg_read(wm8350, WM8350_ROUT2_VOLUME);
+ val = (reg & WM8350_OUT2R_VOL_MASK) >> WM8350_OUT1R_VOL_SHIFT;
+ if (out2->ramp == WM8350_RAMP_UP) {
+ /* ramp step up */
+ if (val < out2->right_vol) {
+ val++;
+ reg &= ~WM8350_OUT2R_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_ROUT2_VOLUME,
+ reg | (val << WM8350_OUT1R_VOL_SHIFT));
+ } else
+ right_complete = 1;
+ } else if (out2->ramp == WM8350_RAMP_DOWN) {
+ /* ramp step down */
+ if (val > 0) {
+ val--;
+ reg &= ~WM8350_OUT2R_VOL_MASK;
+ wm8350_reg_write(wm8350, WM8350_ROUT2_VOLUME,
+ reg | (val << WM8350_OUT1R_VOL_SHIFT));
+ } else
+ right_complete = 1;
+ }
+
+ /* only hit the update bit if either volume has changed this step */
+ if (!left_complete || !right_complete)
+ wm8350_set_bits(wm8350, WM8350_LOUT2_VOLUME, WM8350_OUT2_VU);
+
+ return left_complete & right_complete;
+}
+
+/*
+ * This work ramps both output PGAs at stream start/stop time to
+ * minimise pop associated with DAPM power switching.
+ * It's best to enable Zero Cross when ramping occurs to minimise any
+ * zipper noises.
+ */
+static void wm8350_pga_work(struct work_struct *work)
+{
+ struct snd_soc_codec *codec =
+ container_of(work, struct snd_soc_codec, delayed_work.work);
+ struct wm8350_data *wm8350_data = codec->private_data;
+ struct wm8350_output *out1 = &wm8350_data->out1,
+ *out2 = &wm8350_data->out2;
+ int i, out1_complete, out2_complete;
+
+ /* do we need to ramp at all ? */
+ if (out1->ramp == WM8350_RAMP_NONE && out2->ramp == WM8350_RAMP_NONE)
+ return;
+
+ /* PGA volumes have 6 bits of resolution to ramp */
+ for (i = 0; i <= 63; i++) {
+ out1_complete = 1, out2_complete = 1;
+ if (out1->ramp != WM8350_RAMP_NONE)
+ out1_complete = wm8350_out1_ramp_step(codec);
+ if (out2->ramp != WM8350_RAMP_NONE)
+ out2_complete = wm8350_out2_ramp_step(codec);
+
+ /* ramp finished ? */
+ if (out1_complete && out2_complete)
+ break;
+
+ /* we need to delay longer on the up ramp */
+ if (out1->ramp == WM8350_RAMP_UP ||
+ out2->ramp == WM8350_RAMP_UP) {
+ /* delay is longer over 0dB as increases are larger */
+ if (i >= WM8350_OUTn_0dB)
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (2));
+ else
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (1));
+ } else
+ udelay(50); /* doesn't matter if we delay longer */
+ }
+
+ out1->ramp = WM8350_RAMP_NONE;
+ out2->ramp = WM8350_RAMP_NONE;
+}
+
+/*
+ * WM8350 Controls
+ */
+
+static int pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_codec *codec = w->codec;
+ struct wm8350_data *wm8350_data = codec->private_data;
+ struct wm8350_output *out;
+
+ switch (w->shift) {
+ case 0:
+ case 1:
+ out = &wm8350_data->out1;
+ break;
+ case 2:
+ case 3:
+ out = &wm8350_data->out2;
+ break;
+
+ default:
+ BUG();
+ return -1;
+ }
+
+ switch (event) {
+ case SND_SOC_DAPM_POST_PMU:
+ out->ramp = WM8350_RAMP_UP;
+ out->active = 1;
+
+ if (!delayed_work_pending(&codec->delayed_work))
+ schedule_delayed_work(&codec->delayed_work,
+ msecs_to_jiffies(1));
+ break;
+
+ case SND_SOC_DAPM_PRE_PMD:
+ out->ramp = WM8350_RAMP_DOWN;
+ out->active = 0;
+
+ if (!delayed_work_pending(&codec->delayed_work))
+ schedule_delayed_work(&codec->delayed_work,
+ msecs_to_jiffies(1));
+ break;
+ }
+
+ return 0;
+}
+
+static int wm8350_put_volsw_2r_vu(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8350_data *wm8350_priv = codec->private_data;
+ struct wm8350_output *out = NULL;
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int ret;
+ unsigned int reg = mc->reg;
+ u16 val;
+
+ /* For OUT1 and OUT2 we shadow the values and only actually write
+ * them out when active in order to ensure the amplifier comes on
+ * as quietly as possible. */
+ switch (reg) {
+ case WM8350_LOUT1_VOLUME:
+ out = &wm8350_priv->out1;
+ break;
+ case WM8350_LOUT2_VOLUME:
+ out = &wm8350_priv->out2;
+ break;
+ default:
+ break;
+ }
+
+ if (out) {
+ out->left_vol = ucontrol->value.integer.value[0];
+ out->right_vol = ucontrol->value.integer.value[1];
+ if (!out->active)
+ return 1;
+ }
+
+ ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ if (ret < 0)
+ return ret;
+
+ /* now hit the volume update bits (always bit 8) */
+ val = wm8350_codec_read(codec, reg);
+ wm8350_codec_write(codec, reg, val | WM8350_OUT1_VU);
+ return 1;
+}
+
+static int wm8350_get_volsw_2r(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+ struct wm8350_data *wm8350_priv = codec->private_data;
+ struct wm8350_output *out1 = &wm8350_priv->out1;
+ struct wm8350_output *out2 = &wm8350_priv->out2;
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ unsigned int reg = mc->reg;
+
+ /* If these are cached registers use the cache */
+ switch (reg) {
+ case WM8350_LOUT1_VOLUME:
+ ucontrol->value.integer.value[0] = out1->left_vol;
+ ucontrol->value.integer.value[1] = out1->right_vol;
+ return 0;
+
+ case WM8350_LOUT2_VOLUME:
+ ucontrol->value.integer.value[0] = out2->left_vol;
+ ucontrol->value.integer.value[1] = out2->right_vol;
+ return 0;
+
+ default:
+ break;
+ }
+
+ return snd_soc_get_volsw_2r(kcontrol, ucontrol);
+}
+
+/* double control with volume update */
+#define SOC_WM8350_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+ xinvert, tlv_array) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
+ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \
+ SNDRV_CTL_ELEM_ACCESS_READWRITE | \
+ SNDRV_CTL_ELEM_ACCESS_VOLATILE, \
+ .tlv.p = (tlv_array), \
+ .info = snd_soc_info_volsw_2r, \
+ .get = wm8350_get_volsw_2r, .put = wm8350_put_volsw_2r_vu, \
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .rshift = xshift, .max = xmax, .invert = xinvert}, }
+
+static const char *wm8350_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
+static const char *wm8350_pol[] = { "Normal", "Inv R", "Inv L", "Inv L & R" };
+static const char *wm8350_dacmutem[] = { "Normal", "Soft" };
+static const char *wm8350_dacmutes[] = { "Fast", "Slow" };
+static const char *wm8350_dacfilter[] = { "Normal", "Sloping" };
+static const char *wm8350_adcfilter[] = { "None", "High Pass" };
+static const char *wm8350_adchp[] = { "44.1kHz", "8kHz", "16kHz", "32kHz" };
+static const char *wm8350_lr[] = { "Left", "Right" };
+
+static const struct soc_enum wm8350_enum[] = {
+ SOC_ENUM_SINGLE(WM8350_DAC_CONTROL, 4, 4, wm8350_deemp),
+ SOC_ENUM_SINGLE(WM8350_DAC_CONTROL, 0, 4, wm8350_pol),
+ SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 14, 2, wm8350_dacmutem),
+ SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 13, 2, wm8350_dacmutes),
+ SOC_ENUM_SINGLE(WM8350_DAC_MUTE_VOLUME, 12, 2, wm8350_dacfilter),
+ SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 15, 2, wm8350_adcfilter),
+ SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 8, 4, wm8350_adchp),
+ SOC_ENUM_SINGLE(WM8350_ADC_CONTROL, 0, 4, wm8350_pol),
+ SOC_ENUM_SINGLE(WM8350_INPUT_MIXER_VOLUME, 15, 2, wm8350_lr),
+};
+
+static DECLARE_TLV_DB_LINEAR(pre_amp_tlv, -1200, 3525);
+static DECLARE_TLV_DB_LINEAR(out_pga_tlv, -5700, 600);
+static DECLARE_TLV_DB_SCALE(dac_pcm_tlv, -7163, 36, 1);
+static DECLARE_TLV_DB_SCALE(adc_pcm_tlv, -12700, 50, 1);
+static DECLARE_TLV_DB_SCALE(out_mix_tlv, -1500, 300, 1);
+
+static const unsigned int capture_sd_tlv[] = {
+ TLV_DB_RANGE_HEAD(2),
+ 0, 12, TLV_DB_SCALE_ITEM(-3600, 300, 1),
+ 13, 15, TLV_DB_SCALE_ITEM(0, 0, 0),
+};
+
+static const struct snd_kcontrol_new wm8350_snd_controls[] = {
+ SOC_ENUM("Playback Deemphasis", wm8350_enum[0]),
+ SOC_ENUM("Playback DAC Inversion", wm8350_enum[1]),
+ SOC_WM8350_DOUBLE_R_TLV("Playback PCM Volume",
+ WM8350_DAC_DIGITAL_VOLUME_L,
+ WM8350_DAC_DIGITAL_VOLUME_R,
+ 0, 255, 0, dac_pcm_tlv),
+ SOC_ENUM("Playback PCM Mute Function", wm8350_enum[2]),
+ SOC_ENUM("Playback PCM Mute Speed", wm8350_enum[3]),
+ SOC_ENUM("Playback PCM Filter", wm8350_enum[4]),
+ SOC_ENUM("Capture PCM Filter", wm8350_enum[5]),
+ SOC_ENUM("Capture PCM HP Filter", wm8350_enum[6]),
+ SOC_ENUM("Capture ADC Inversion", wm8350_enum[7]),
+ SOC_WM8350_DOUBLE_R_TLV("Capture PCM Volume",
+ WM8350_ADC_DIGITAL_VOLUME_L,
+ WM8350_ADC_DIGITAL_VOLUME_R,
+ 0, 255, 0, adc_pcm_tlv),
+ SOC_DOUBLE_TLV("Capture Sidetone Volume",
+ WM8350_ADC_DIVIDER,
+ 8, 4, 15, 1, capture_sd_tlv),
+ SOC_WM8350_DOUBLE_R_TLV("Capture Volume",
+ WM8350_LEFT_INPUT_VOLUME,
+ WM8350_RIGHT_INPUT_VOLUME,
+ 2, 63, 0, pre_amp_tlv),
+ SOC_DOUBLE_R("Capture ZC Switch",
+ WM8350_LEFT_INPUT_VOLUME,
+ WM8350_RIGHT_INPUT_VOLUME, 13, 1, 0),
+ SOC_SINGLE_TLV("Left Input Left Sidetone Volume",
+ WM8350_OUTPUT_LEFT_MIXER_VOLUME, 1, 7, 0, out_mix_tlv),
+ SOC_SINGLE_TLV("Left Input Right Sidetone Volume",
+ WM8350_OUTPUT_LEFT_MIXER_VOLUME,
+ 5, 7, 0, out_mix_tlv),
+ SOC_SINGLE_TLV("Left Input Bypass Volume",
+ WM8350_OUTPUT_LEFT_MIXER_VOLUME,
+ 9, 7, 0, out_mix_tlv),
+ SOC_SINGLE_TLV("Right Input Left Sidetone Volume",
+ WM8350_OUTPUT_RIGHT_MIXER_VOLUME,
+ 1, 7, 0, out_mix_tlv),
+ SOC_SINGLE_TLV("Right Input Right Sidetone Volume",
+ WM8350_OUTPUT_RIGHT_MIXER_VOLUME,
+ 5, 7, 0, out_mix_tlv),
+ SOC_SINGLE_TLV("Right Input Bypass Volume",
+ WM8350_OUTPUT_RIGHT_MIXER_VOLUME,
+ 13, 7, 0, out_mix_tlv),
+ SOC_SINGLE("Left Input Mixer +20dB Switch",
+ WM8350_INPUT_MIXER_VOLUME_L, 0, 1, 0),
+ SOC_SINGLE("Right Input Mixer +20dB Switch",
+ WM8350_INPUT_MIXER_VOLUME_R, 0, 1, 0),
+ SOC_SINGLE_TLV("Out4 Capture Volume",
+ WM8350_INPUT_MIXER_VOLUME,
+ 1, 7, 0, out_mix_tlv),
+ SOC_WM8350_DOUBLE_R_TLV("Out1 Playback Volume",
+ WM8350_LOUT1_VOLUME,
+ WM8350_ROUT1_VOLUME,
+ 2, 63, 0, out_pga_tlv),
+ SOC_DOUBLE_R("Out1 Playback ZC Switch",
+ WM8350_LOUT1_VOLUME,
+ WM8350_ROUT1_VOLUME, 13, 1, 0),
+ SOC_WM8350_DOUBLE_R_TLV("Out2 Playback Volume",
+ WM8350_LOUT2_VOLUME,
+ WM8350_ROUT2_VOLUME,
+ 2, 63, 0, out_pga_tlv),
+ SOC_DOUBLE_R("Out2 Playback ZC Switch", WM8350_LOUT2_VOLUME,
+ WM8350_ROUT2_VOLUME, 13, 1, 0),
+ SOC_SINGLE("Out2 Right Invert Switch", WM8350_ROUT2_VOLUME, 10, 1, 0),
+ SOC_SINGLE_TLV("Out2 Beep Volume", WM8350_BEEP_VOLUME,
+ 5, 7, 0, out_mix_tlv),
+
+ SOC_DOUBLE_R("Out1 Playback Switch",
+ WM8350_LOUT1_VOLUME,
+ WM8350_ROUT1_VOLUME,
+ 14, 1, 1),
+ SOC_DOUBLE_R("Out2 Playback Switch",
+ WM8350_LOUT2_VOLUME,
+ WM8350_ROUT2_VOLUME,
+ 14, 1, 1),
+};
+
+/*
+ * DAPM Controls
+ */
+
+/* Left Playback Mixer */
+static const struct snd_kcontrol_new wm8350_left_play_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Playback Switch",
+ WM8350_LEFT_MIXER_CONTROL, 11, 1, 0),
+ SOC_DAPM_SINGLE("Left Bypass Switch",
+ WM8350_LEFT_MIXER_CONTROL, 2, 1, 0),
+ SOC_DAPM_SINGLE("Right Playback Switch",
+ WM8350_LEFT_MIXER_CONTROL, 12, 1, 0),
+ SOC_DAPM_SINGLE("Left Sidetone Switch",
+ WM8350_LEFT_MIXER_CONTROL, 0, 1, 0),
+ SOC_DAPM_SINGLE("Right Sidetone Switch",
+ WM8350_LEFT_MIXER_CONTROL, 1, 1, 0),
+};
+
+/* Right Playback Mixer */
+static const struct snd_kcontrol_new wm8350_right_play_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Playback Switch",
+ WM8350_RIGHT_MIXER_CONTROL, 12, 1, 0),
+ SOC_DAPM_SINGLE("Right Bypass Switch",
+ WM8350_RIGHT_MIXER_CONTROL, 3, 1, 0),
+ SOC_DAPM_SINGLE("Left Playback Switch",
+ WM8350_RIGHT_MIXER_CONTROL, 11, 1, 0),
+ SOC_DAPM_SINGLE("Left Sidetone Switch",
+ WM8350_RIGHT_MIXER_CONTROL, 0, 1, 0),
+ SOC_DAPM_SINGLE("Right Sidetone Switch",
+ WM8350_RIGHT_MIXER_CONTROL, 1, 1, 0),
+};
+
+/* Out4 Mixer */
+static const struct snd_kcontrol_new wm8350_out4_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Right Playback Switch",
+ WM8350_OUT4_MIXER_CONTROL, 12, 1, 0),
+ SOC_DAPM_SINGLE("Left Playback Switch",
+ WM8350_OUT4_MIXER_CONTROL, 11, 1, 0),
+ SOC_DAPM_SINGLE("Right Capture Switch",
+ WM8350_OUT4_MIXER_CONTROL, 9, 1, 0),
+ SOC_DAPM_SINGLE("Out3 Playback Switch",
+ WM8350_OUT4_MIXER_CONTROL, 2, 1, 0),
+ SOC_DAPM_SINGLE("Right Mixer Switch",
+ WM8350_OUT4_MIXER_CONTROL, 1, 1, 0),
+ SOC_DAPM_SINGLE("Left Mixer Switch",
+ WM8350_OUT4_MIXER_CONTROL, 0, 1, 0),
+};
+
+/* Out3 Mixer */
+static const struct snd_kcontrol_new wm8350_out3_mixer_controls[] = {
+ SOC_DAPM_SINGLE("Left Playback Switch",
+ WM8350_OUT3_MIXER_CONTROL, 11, 1, 0),
+ SOC_DAPM_SINGLE("Left Capture Switch",
+ WM8350_OUT3_MIXER_CONTROL, 8, 1, 0),
+ SOC_DAPM_SINGLE("Out4 Playback Switch",
+ WM8350_OUT3_MIXER_CONTROL, 3, 1, 0),
+ SOC_DAPM_SINGLE("Left Mixer Switch",
+ WM8350_OUT3_MIXER_CONTROL, 0, 1, 0),
+};
+
+/* Left Input Mixer */
+static const struct snd_kcontrol_new wm8350_left_capt_mixer_controls[] = {
+ SOC_DAPM_SINGLE_TLV("L2 Capture Volume",
+ WM8350_INPUT_MIXER_VOLUME_L, 1, 7, 0, out_mix_tlv),
+ SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
+ WM8350_INPUT_MIXER_VOLUME_L, 9, 7, 0, out_mix_tlv),
+ SOC_DAPM_SINGLE("PGA Capture Switch",
+ WM8350_LEFT_INPUT_VOLUME, 14, 1, 0),
+};
+
+/* Right Input Mixer */
+static const struct snd_kcontrol_new wm8350_right_capt_mixer_controls[] = {
+ SOC_DAPM_SINGLE_TLV("L2 Capture Volume",
+ WM8350_INPUT_MIXER_VOLUME_R, 5, 7, 0, out_mix_tlv),
+ SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
+ WM8350_INPUT_MIXER_VOLUME_R, 13, 7, 0, out_mix_tlv),
+ SOC_DAPM_SINGLE("PGA Capture Switch",
+ WM8350_RIGHT_INPUT_VOLUME, 14, 1, 0),
+};
+
+/* Left Mic Mixer */
+static const struct snd_kcontrol_new wm8350_left_mic_mixer_controls[] = {
+ SOC_DAPM_SINGLE("INN Capture Switch", WM8350_INPUT_CONTROL, 1, 1, 0),
+ SOC_DAPM_SINGLE("INP Capture Switch", WM8350_INPUT_CONTROL, 0, 1, 0),
+ SOC_DAPM_SINGLE("IN2 Capture Switch", WM8350_INPUT_CONTROL, 2, 1, 0),
+};
+
+/* Right Mic Mixer */
+static const struct snd_kcontrol_new wm8350_right_mic_mixer_controls[] = {
+ SOC_DAPM_SINGLE("INN Capture Switch", WM8350_INPUT_CONTROL, 9, 1, 0),
+ SOC_DAPM_SINGLE("INP Capture Switch", WM8350_INPUT_CONTROL, 8, 1, 0),
+ SOC_DAPM_SINGLE("IN2 Capture Switch", WM8350_INPUT_CONTROL, 10, 1, 0),
+};
+
+/* Beep Switch */
+static const struct snd_kcontrol_new wm8350_beep_switch_controls =
+SOC_DAPM_SINGLE("Switch", WM8350_BEEP_VOLUME, 15, 1, 1);
+
+/* Out4 Capture Mux */
+static const struct snd_kcontrol_new wm8350_out4_capture_controls =
+SOC_DAPM_ENUM("Route", wm8350_enum[8]);
+
+static const struct snd_soc_dapm_widget wm8350_dapm_widgets[] = {
+
+ SND_SOC_DAPM_PGA("IN3R PGA", WM8350_POWER_MGMT_2, 11, 0, NULL, 0),
+ SND_SOC_DAPM_PGA("IN3L PGA", WM8350_POWER_MGMT_2, 10, 0, NULL, 0),
+ SND_SOC_DAPM_PGA_E("Right Out2 PGA", WM8350_POWER_MGMT_3, 3, 0, NULL,
+ 0, pga_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA_E("Left Out2 PGA", WM8350_POWER_MGMT_3, 2, 0, NULL, 0,
+ pga_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA_E("Right Out1 PGA", WM8350_POWER_MGMT_3, 1, 0, NULL,
+ 0, pga_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_PGA_E("Left Out1 PGA", WM8350_POWER_MGMT_3, 0, 0, NULL, 0,
+ pga_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+
+ SND_SOC_DAPM_MIXER("Right Capture Mixer", WM8350_POWER_MGMT_2,
+ 7, 0, &wm8350_right_capt_mixer_controls[0],
+ ARRAY_SIZE(wm8350_right_capt_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Left Capture Mixer", WM8350_POWER_MGMT_2,
+ 6, 0, &wm8350_left_capt_mixer_controls[0],
+ ARRAY_SIZE(wm8350_left_capt_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Out4 Mixer", WM8350_POWER_MGMT_2, 5, 0,
+ &wm8350_out4_mixer_controls[0],
+ ARRAY_SIZE(wm8350_out4_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Out3 Mixer", WM8350_POWER_MGMT_2, 4, 0,
+ &wm8350_out3_mixer_controls[0],
+ ARRAY_SIZE(wm8350_out3_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Right Playback Mixer", WM8350_POWER_MGMT_2, 1, 0,
+ &wm8350_right_play_mixer_controls[0],
+ ARRAY_SIZE(wm8350_right_play_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Left Playback Mixer", WM8350_POWER_MGMT_2, 0, 0,
+ &wm8350_left_play_mixer_controls[0],
+ ARRAY_SIZE(wm8350_left_play_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Left Mic Mixer", WM8350_POWER_MGMT_2, 8, 0,
+ &wm8350_left_mic_mixer_controls[0],
+ ARRAY_SIZE(wm8350_left_mic_mixer_controls)),
+
+ SND_SOC_DAPM_MIXER("Right Mic Mixer", WM8350_POWER_MGMT_2, 9, 0,
+ &wm8350_right_mic_mixer_controls[0],
+ ARRAY_SIZE(wm8350_right_mic_mixer_controls)),
+
+ /* virtual mixer for Beep and Out2R */
+ SND_SOC_DAPM_MIXER("Out2 Mixer", SND_SOC_NOPM, 0, 0, NULL, 0),
+
+ SND_SOC_DAPM_SWITCH("Beep", WM8350_POWER_MGMT_3, 7, 0,
+ &wm8350_beep_switch_controls),
+
+ SND_SOC_DAPM_ADC("Right ADC", "Right Capture",
+ WM8350_POWER_MGMT_4, 3, 0),
+ SND_SOC_DAPM_ADC("Left ADC", "Left Capture",
+ WM8350_POWER_MGMT_4, 2, 0),
+ SND_SOC_DAPM_DAC("Right DAC", "Right Playback",
+ WM8350_POWER_MGMT_4, 5, 0),
+ SND_SOC_DAPM_DAC("Left DAC", "Left Playback",
+ WM8350_POWER_MGMT_4, 4, 0),
+
+ SND_SOC_DAPM_MICBIAS("Mic Bias", WM8350_POWER_MGMT_1, 4, 0),
+
+ SND_SOC_DAPM_MUX("Out4 Capture Channel", SND_SOC_NOPM, 0, 0,
+ &wm8350_out4_capture_controls),
+
+ SND_SOC_DAPM_OUTPUT("OUT1R"),
+ SND_SOC_DAPM_OUTPUT("OUT1L"),
+ SND_SOC_DAPM_OUTPUT("OUT2R"),
+ SND_SOC_DAPM_OUTPUT("OUT2L"),
+ SND_SOC_DAPM_OUTPUT("OUT3"),
+ SND_SOC_DAPM_OUTPUT("OUT4"),
+
+ SND_SOC_DAPM_INPUT("IN1RN"),
+ SND_SOC_DAPM_INPUT("IN1RP"),
+ SND_SOC_DAPM_INPUT("IN2R"),
+ SND_SOC_DAPM_INPUT("IN1LP"),
+ SND_SOC_DAPM_INPUT("IN1LN"),
+ SND_SOC_DAPM_INPUT("IN2L"),
+ SND_SOC_DAPM_INPUT("IN3R"),
+ SND_SOC_DAPM_INPUT("IN3L"),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* left playback mixer */
+ {"Left Playback Mixer", "Playback Switch", "Left DAC"},
+ {"Left Playback Mixer", "Left Bypass Switch", "IN3L PGA"},
+ {"Left Playback Mixer", "Right Playback Switch", "Right DAC"},
+ {"Left Playback Mixer", "Left Sidetone Switch", "Left Mic Mixer"},
+ {"Left Playback Mixer", "Right Sidetone Switch", "Right Mic Mixer"},
+
+ /* right playback mixer */
+ {"Right Playback Mixer", "Playback Switch", "Right DAC"},
+ {"Right Playback Mixer", "Right Bypass Switch", "IN3R PGA"},
+ {"Right Playback Mixer", "Left Playback Switch", "Left DAC"},
+ {"Right Playback Mixer", "Left Sidetone Switch", "Left Mic Mixer"},
+ {"Right Playback Mixer", "Right Sidetone Switch", "Right Mic Mixer"},
+
+ /* out4 playback mixer */
+ {"Out4 Mixer", "Right Playback Switch", "Right DAC"},
+ {"Out4 Mixer", "Left Playback Switch", "Left DAC"},
+ {"Out4 Mixer", "Right Capture Switch", "Right Capture Mixer"},
+ {"Out4 Mixer", "Out3 Playback Switch", "Out3 Mixer"},
+ {"Out4 Mixer", "Right Mixer Switch", "Right Playback Mixer"},
+ {"Out4 Mixer", "Left Mixer Switch", "Left Playback Mixer"},
+ {"OUT4", NULL, "Out4 Mixer"},
+
+ /* out3 playback mixer */
+ {"Out3 Mixer", "Left Playback Switch", "Left DAC"},
+ {"Out3 Mixer", "Left Capture Switch", "Left Capture Mixer"},
+ {"Out3 Mixer", "Left Mixer Switch", "Left Playback Mixer"},
+ {"Out3 Mixer", "Out4 Playback Switch", "Out4 Mixer"},
+ {"OUT3", NULL, "Out3 Mixer"},
+
+ /* out2 */
+ {"Right Out2 PGA", NULL, "Right Playback Mixer"},
+ {"Left Out2 PGA", NULL, "Left Playback Mixer"},
+ {"OUT2L", NULL, "Left Out2 PGA"},
+ {"OUT2R", NULL, "Right Out2 PGA"},
+
+ /* out1 */
+ {"Right Out1 PGA", NULL, "Right Playback Mixer"},
+ {"Left Out1 PGA", NULL, "Left Playback Mixer"},
+ {"OUT1L", NULL, "Left Out1 PGA"},
+ {"OUT1R", NULL, "Right Out1 PGA"},
+
+ /* ADCs */
+ {"Left ADC", NULL, "Left Capture Mixer"},
+ {"Right ADC", NULL, "Right Capture Mixer"},
+
+ /* Left capture mixer */
+ {"Left Capture Mixer", "L2 Capture Volume", "IN2L"},
+ {"Left Capture Mixer", "L3 Capture Volume", "IN3L PGA"},
+ {"Left Capture Mixer", "PGA Capture Switch", "Left Mic Mixer"},
+ {"Left Capture Mixer", NULL, "Out4 Capture Channel"},
+
+ /* Right capture mixer */
+ {"Right Capture Mixer", "L2 Capture Volume", "IN2R"},
+ {"Right Capture Mixer", "L3 Capture Volume", "IN3R PGA"},
+ {"Right Capture Mixer", "PGA Capture Switch", "Right Mic Mixer"},
+ {"Right Capture Mixer", NULL, "Out4 Capture Channel"},
+
+ /* L3 Inputs */
+ {"IN3L PGA", NULL, "IN3L"},
+ {"IN3R PGA", NULL, "IN3R"},
+
+ /* Left Mic mixer */
+ {"Left Mic Mixer", "INN Capture Switch", "IN1LN"},
+ {"Left Mic Mixer", "INP Capture Switch", "IN1LP"},
+ {"Left Mic Mixer", "IN2 Capture Switch", "IN2L"},
+
+ /* Right Mic mixer */
+ {"Right Mic Mixer", "INN Capture Switch", "IN1RN"},
+ {"Right Mic Mixer", "INP Capture Switch", "IN1RP"},
+ {"Right Mic Mixer", "IN2 Capture Switch", "IN2R"},
+
+ /* out 4 capture */
+ {"Out4 Capture Channel", NULL, "Out4 Mixer"},
+
+ /* Beep */
+ {"Beep", NULL, "IN3R PGA"},
+};
+
+static int wm8350_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8350_snd_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&wm8350_snd_controls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static int wm8350_add_widgets(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ ret = snd_soc_dapm_new_controls(codec,
+ wm8350_dapm_widgets,
+ ARRAY_SIZE(wm8350_dapm_widgets));
+ if (ret != 0) {
+ dev_err(codec->dev, "dapm control register failed\n");
+ return ret;
+ }
+
+ /* set up audio paths */
+ ret = snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+ if (ret != 0) {
+ dev_err(codec->dev, "DAPM route register failed\n");
+ return ret;
+ }
+
+ return snd_soc_dapm_new_widgets(codec);
+}
+
+static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8350 *wm8350 = codec->control_data;
+ u16 fll_4;
+
+ switch (clk_id) {
+ case WM8350_MCLK_SEL_MCLK:
+ wm8350_clear_bits(wm8350, WM8350_CLOCK_CONTROL_1,
+ WM8350_MCLK_SEL);
+ break;
+ case WM8350_MCLK_SEL_PLL_MCLK:
+ case WM8350_MCLK_SEL_PLL_DAC:
+ case WM8350_MCLK_SEL_PLL_ADC:
+ case WM8350_MCLK_SEL_PLL_32K:
+ wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_1,
+ WM8350_MCLK_SEL);
+ fll_4 = wm8350_codec_read(codec, WM8350_FLL_CONTROL_4) &
+ ~WM8350_FLL_CLK_SRC_MASK;
+ wm8350_codec_write(codec, WM8350_FLL_CONTROL_4, fll_4 | clk_id);
+ break;
+ }
+
+ /* MCLK direction */
+ if (dir == WM8350_MCLK_DIR_OUT)
+ wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2,
+ WM8350_MCLK_DIR);
+ else
+ wm8350_clear_bits(wm8350, WM8350_CLOCK_CONTROL_2,
+ WM8350_MCLK_DIR);
+
+ return 0;
+}
+
+static int wm8350_set_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 val;
+
+ switch (div_id) {
+ case WM8350_ADC_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_ADC_DIVIDER) &
+ ~WM8350_ADC_CLKDIV_MASK;
+ wm8350_codec_write(codec, WM8350_ADC_DIVIDER, val | div);
+ break;
+ case WM8350_DAC_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_DAC_CLOCK_CONTROL) &
+ ~WM8350_DAC_CLKDIV_MASK;
+ wm8350_codec_write(codec, WM8350_DAC_CLOCK_CONTROL, val | div);
+ break;
+ case WM8350_BCLK_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_CLOCK_CONTROL_1) &
+ ~WM8350_BCLK_DIV_MASK;
+ wm8350_codec_write(codec, WM8350_CLOCK_CONTROL_1, val | div);
+ break;
+ case WM8350_OPCLK_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_CLOCK_CONTROL_1) &
+ ~WM8350_OPCLK_DIV_MASK;
+ wm8350_codec_write(codec, WM8350_CLOCK_CONTROL_1, val | div);
+ break;
+ case WM8350_SYS_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_CLOCK_CONTROL_1) &
+ ~WM8350_MCLK_DIV_MASK;
+ wm8350_codec_write(codec, WM8350_CLOCK_CONTROL_1, val | div);
+ break;
+ case WM8350_DACLR_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_DAC_LR_RATE) &
+ ~WM8350_DACLRC_RATE_MASK;
+ wm8350_codec_write(codec, WM8350_DAC_LR_RATE, val | div);
+ break;
+ case WM8350_ADCLR_CLKDIV:
+ val = wm8350_codec_read(codec, WM8350_ADC_LR_RATE) &
+ ~WM8350_ADCLRC_RATE_MASK;
+ wm8350_codec_write(codec, WM8350_ADC_LR_RATE, val | div);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm8350_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 iface = wm8350_codec_read(codec, WM8350_AI_FORMATING) &
+ ~(WM8350_AIF_BCLK_INV | WM8350_AIF_LRCLK_INV | WM8350_AIF_FMT_MASK);
+ u16 master = wm8350_codec_read(codec, WM8350_AI_DAC_CONTROL) &
+ ~WM8350_BCLK_MSTR;
+ u16 dac_lrc = wm8350_codec_read(codec, WM8350_DAC_LR_RATE) &
+ ~WM8350_DACLRC_ENA;
+ u16 adc_lrc = wm8350_codec_read(codec, WM8350_ADC_LR_RATE) &
+ ~WM8350_ADCLRC_ENA;
+
+ /* set master/slave audio interface */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ master |= WM8350_BCLK_MSTR;
+ dac_lrc |= WM8350_DACLRC_ENA;
+ adc_lrc |= WM8350_ADCLRC_ENA;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* interface format */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 0x2 << 8;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ break;
+ case SND_SOC_DAIFMT_LEFT_J:
+ iface |= 0x1 << 8;
+ break;
+ case SND_SOC_DAIFMT_DSP_A:
+ iface |= 0x3 << 8;
+ break;
+ case SND_SOC_DAIFMT_DSP_B:
+ iface |= 0x3 << 8; /* lg not sure which mode */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* clock inversion */
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= WM8350_AIF_LRCLK_INV | WM8350_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= WM8350_AIF_BCLK_INV;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= WM8350_AIF_LRCLK_INV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8350_codec_write(codec, WM8350_AI_FORMATING, iface);
+ wm8350_codec_write(codec, WM8350_AI_DAC_CONTROL, master);
+ wm8350_codec_write(codec, WM8350_DAC_LR_RATE, dac_lrc);
+ wm8350_codec_write(codec, WM8350_ADC_LR_RATE, adc_lrc);
+ return 0;
+}
+
+static int wm8350_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *codec_dai)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ int master = wm8350_codec_cache_read(codec, WM8350_AI_DAC_CONTROL) &
+ WM8350_BCLK_MSTR;
+ int enabled = 0;
+
+ /* Check that the DACs or ADCs are enabled since they are
+ * required for LRC in master mode. The DACs or ADCs need a
+ * valid audio path i.e. pin -> ADC or DAC -> pin before
+ * the LRC will be enabled in master mode. */
+ if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+ return 0;
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ enabled = wm8350_codec_cache_read(codec, WM8350_POWER_MGMT_4) &
+ (WM8350_ADCR_ENA | WM8350_ADCL_ENA);
+ } else {
+ enabled = wm8350_codec_cache_read(codec, WM8350_POWER_MGMT_4) &
+ (WM8350_DACR_ENA | WM8350_DACL_ENA);
+ }
+
+ if (!enabled) {
+ dev_err(codec->dev,
+ "%s: invalid audio path - no clocks available\n",
+ __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int wm8350_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *codec_dai)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 iface = wm8350_codec_read(codec, WM8350_AI_FORMATING) &
+ ~WM8350_AIF_WL_MASK;
+
+ /* bit size */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ iface |= 0x1 << 10;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ iface |= 0x2 << 10;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ iface |= 0x3 << 10;
+ break;
+ }
+
+ wm8350_codec_write(codec, WM8350_AI_FORMATING, iface);
+ return 0;
+}
+
+static int wm8350_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ struct wm8350 *wm8350 = codec->control_data;
+
+ if (mute)
+ wm8350_set_bits(wm8350, WM8350_DAC_MUTE, WM8350_DAC_MUTE_ENA);
+ else
+ wm8350_clear_bits(wm8350, WM8350_DAC_MUTE, WM8350_DAC_MUTE_ENA);
+ return 0;
+}
+
+/* FLL divisors */
+struct _fll_div {
+ int div; /* FLL_OUTDIV */
+ int n;
+ int k;
+ int ratio; /* FLL_FRATIO */
+};
+
+/* The size in bits of the fll divide multiplied by 10
+ * to allow rounding later */
+#define FIXED_FLL_SIZE ((1 << 16) * 10)
+
+static inline int fll_factors(struct _fll_div *fll_div, unsigned int input,
+ unsigned int output)
+{
+ u64 Kpart;
+ unsigned int t1, t2, K, Nmod;
+
+ if (output >= 2815250 && output <= 3125000)
+ fll_div->div = 0x4;
+ else if (output >= 5625000 && output <= 6250000)
+ fll_div->div = 0x3;
+ else if (output >= 11250000 && output <= 12500000)
+ fll_div->div = 0x2;
+ else if (output >= 22500000 && output <= 25000000)
+ fll_div->div = 0x1;
+ else {
+ printk(KERN_ERR "wm8350: fll freq %d out of range\n", output);
+ return -EINVAL;
+ }
+
+ if (input > 48000)
+ fll_div->ratio = 1;
+ else
+ fll_div->ratio = 8;
+
+ t1 = output * (1 << (fll_div->div + 1));
+ t2 = input * fll_div->ratio;
+
+ fll_div->n = t1 / t2;
+ Nmod = t1 % t2;
+
+ if (Nmod) {
+ Kpart = FIXED_FLL_SIZE * (long long)Nmod;
+ do_div(Kpart, t2);
+ K = Kpart & 0xFFFFFFFF;
+
+ /* Check if we need to round */
+ if ((K % 10) >= 5)
+ K += 5;
+
+ /* Move down to proper range now rounding is done */
+ K /= 10;
+ fll_div->k = K;
+ } else
+ fll_div->k = 0;
+
+ return 0;
+}
+
+static int wm8350_set_fll(struct snd_soc_dai *codec_dai,
+ int pll_id, unsigned int freq_in,
+ unsigned int freq_out)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct wm8350 *wm8350 = codec->control_data;
+ struct _fll_div fll_div;
+ int ret = 0;
+ u16 fll_1, fll_4;
+
+ /* power down FLL - we need to do this for reconfiguration */
+ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4,
+ WM8350_FLL_ENA | WM8350_FLL_OSC_ENA);
+
+ if (freq_out == 0 || freq_in == 0)
+ return ret;
+
+ ret = fll_factors(&fll_div, freq_in, freq_out);
+ if (ret < 0)
+ return ret;
+ dev_dbg(wm8350->dev,
+ "FLL in %d FLL out %d N 0x%x K 0x%x div %d ratio %d",
+ freq_in, freq_out, fll_div.n, fll_div.k, fll_div.div,
+ fll_div.ratio);
+
+ /* set up N.K & dividers */
+ fll_1 = wm8350_codec_read(codec, WM8350_FLL_CONTROL_1) &
+ ~(WM8350_FLL_OUTDIV_MASK | WM8350_FLL_RSP_RATE_MASK | 0xc000);
+ wm8350_codec_write(codec, WM8350_FLL_CONTROL_1,
+ fll_1 | (fll_div.div << 8) | 0x50);
+ wm8350_codec_write(codec, WM8350_FLL_CONTROL_2,
+ (fll_div.ratio << 11) | (fll_div.
+ n & WM8350_FLL_N_MASK));
+ wm8350_codec_write(codec, WM8350_FLL_CONTROL_3, fll_div.k);
+ fll_4 = wm8350_codec_read(codec, WM8350_FLL_CONTROL_4) &
+ ~(WM8350_FLL_FRAC | WM8350_FLL_SLOW_LOCK_REF);
+ wm8350_codec_write(codec, WM8350_FLL_CONTROL_4,
+ fll_4 | (fll_div.k ? WM8350_FLL_FRAC : 0) |
+ (fll_div.ratio == 8 ? WM8350_FLL_SLOW_LOCK_REF : 0));
+
+ /* power FLL on */
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_OSC_ENA);
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4, WM8350_FLL_ENA);
+
+ return 0;
+}
+
+static int wm8350_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ struct wm8350 *wm8350 = codec->control_data;
+ struct wm8350_data *priv = codec->private_data;
+ struct wm8350_audio_platform_data *platform =
+ wm8350->codec.platform_data;
+ u16 pm1;
+ int ret;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1) &
+ ~(WM8350_VMID_MASK | WM8350_CODEC_ISEL_MASK);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ pm1 | WM8350_VMID_50K |
+ platform->codec_current_on << 14);
+ break;
+
+ case SND_SOC_BIAS_PREPARE:
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1);
+ pm1 &= ~WM8350_VMID_MASK;
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ pm1 | WM8350_VMID_50K);
+ break;
+
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ ret = regulator_bulk_enable(ARRAY_SIZE(priv->supplies),
+ priv->supplies);
+ if (ret != 0)
+ return ret;
+
+ /* Enable the system clock */
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_4,
+ WM8350_SYSCLK_ENA);
+
+ /* mute DAC & outputs */
+ wm8350_set_bits(wm8350, WM8350_DAC_MUTE,
+ WM8350_DAC_MUTE_ENA);
+
+ /* discharge cap memory */
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL,
+ platform->dis_out1 |
+ (platform->dis_out2 << 2) |
+ (platform->dis_out3 << 4) |
+ (platform->dis_out4 << 6));
+
+ /* wait for discharge */
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (platform->
+ cap_discharge_msecs));
+
+ /* enable antipop */
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL,
+ (platform->vmid_s_curve << 8));
+
+ /* ramp up vmid */
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ (platform->
+ codec_current_charge << 14) |
+ WM8350_VMID_5K | WM8350_VMIDEN |
+ WM8350_VBUFEN);
+
+ /* wait for vmid */
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (platform->
+ vmid_charge_msecs));
+
+ /* turn on vmid 300k */
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1) &
+ ~(WM8350_VMID_MASK | WM8350_CODEC_ISEL_MASK);
+ pm1 |= WM8350_VMID_300K |
+ (platform->codec_current_standby << 14);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ pm1);
+
+
+ /* enable analogue bias */
+ pm1 |= WM8350_BIASEN;
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1);
+
+ /* disable antipop */
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL, 0);
+
+ } else {
+ /* turn on vmid 300k and reduce current */
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1) &
+ ~(WM8350_VMID_MASK | WM8350_CODEC_ISEL_MASK);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ pm1 | WM8350_VMID_300K |
+ (platform->
+ codec_current_standby << 14));
+
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+
+ /* mute DAC & enable outputs */
+ wm8350_set_bits(wm8350, WM8350_DAC_MUTE, WM8350_DAC_MUTE_ENA);
+
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_3,
+ WM8350_OUT1L_ENA | WM8350_OUT1R_ENA |
+ WM8350_OUT2L_ENA | WM8350_OUT2R_ENA);
+
+ /* enable anti pop S curve */
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL,
+ (platform->vmid_s_curve << 8));
+
+ /* turn off vmid */
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1) &
+ ~WM8350_VMIDEN;
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1);
+
+ /* wait */
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (platform->
+ vmid_discharge_msecs));
+
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL,
+ (platform->vmid_s_curve << 8) |
+ platform->dis_out1 |
+ (platform->dis_out2 << 2) |
+ (platform->dis_out3 << 4) |
+ (platform->dis_out4 << 6));
+
+ /* turn off VBuf and drain */
+ pm1 = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_1) &
+ ~(WM8350_VBUFEN | WM8350_VMID_MASK);
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1,
+ pm1 | WM8350_OUTPUT_DRAIN_EN);
+
+ /* wait */
+ schedule_timeout_interruptible(msecs_to_jiffies
+ (platform->drain_msecs));
+
+ pm1 &= ~WM8350_BIASEN;
+ wm8350_reg_write(wm8350, WM8350_POWER_MGMT_1, pm1);
+
+ /* disable anti-pop */
+ wm8350_reg_write(wm8350, WM8350_ANTI_POP_CONTROL, 0);
+
+ wm8350_clear_bits(wm8350, WM8350_LOUT1_VOLUME,
+ WM8350_OUT1L_ENA);
+ wm8350_clear_bits(wm8350, WM8350_ROUT1_VOLUME,
+ WM8350_OUT1R_ENA);
+ wm8350_clear_bits(wm8350, WM8350_LOUT2_VOLUME,
+ WM8350_OUT2L_ENA);
+ wm8350_clear_bits(wm8350, WM8350_ROUT2_VOLUME,
+ WM8350_OUT2R_ENA);
+
+ /* disable clock gen */
+ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_4,
+ WM8350_SYSCLK_ENA);
+
+ regulator_bulk_disable(ARRAY_SIZE(priv->supplies),
+ priv->supplies);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+static int wm8350_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ wm8350_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ return 0;
+}
+
+static int wm8350_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ if (codec->suspend_bias_level == SND_SOC_BIAS_ON)
+ wm8350_set_bias_level(codec, SND_SOC_BIAS_ON);
+
+ return 0;
+}
+
+static struct snd_soc_codec *wm8350_codec;
+
+static int wm8350_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec;
+ struct wm8350 *wm8350;
+ struct wm8350_data *priv;
+ int ret;
+ struct wm8350_output *out1;
+ struct wm8350_output *out2;
+
+ BUG_ON(!wm8350_codec);
+
+ socdev->codec = wm8350_codec;
+ codec = socdev->codec;
+ wm8350 = codec->control_data;
+ priv = codec->private_data;
+
+ /* Enable the codec */
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CODEC_ENA);
+
+ /* Enable robust clocking mode in ADC */
+ wm8350_codec_write(codec, WM8350_SECURITY, 0xa7);
+ wm8350_codec_write(codec, 0xde, 0x13);
+ wm8350_codec_write(codec, WM8350_SECURITY, 0);
+
+ /* read OUT1 & OUT2 volumes */
+ out1 = &priv->out1;
+ out2 = &priv->out2;
+ out1->left_vol = (wm8350_reg_read(wm8350, WM8350_LOUT1_VOLUME) &
+ WM8350_OUT1L_VOL_MASK) >> WM8350_OUT1L_VOL_SHIFT;
+ out1->right_vol = (wm8350_reg_read(wm8350, WM8350_ROUT1_VOLUME) &
+ WM8350_OUT1R_VOL_MASK) >> WM8350_OUT1R_VOL_SHIFT;
+ out2->left_vol = (wm8350_reg_read(wm8350, WM8350_LOUT2_VOLUME) &
+ WM8350_OUT2L_VOL_MASK) >> WM8350_OUT1L_VOL_SHIFT;
+ out2->right_vol = (wm8350_reg_read(wm8350, WM8350_ROUT2_VOLUME) &
+ WM8350_OUT2R_VOL_MASK) >> WM8350_OUT1R_VOL_SHIFT;
+ wm8350_reg_write(wm8350, WM8350_LOUT1_VOLUME, 0);
+ wm8350_reg_write(wm8350, WM8350_ROUT1_VOLUME, 0);
+ wm8350_reg_write(wm8350, WM8350_LOUT2_VOLUME, 0);
+ wm8350_reg_write(wm8350, WM8350_ROUT2_VOLUME, 0);
+
+ /* Latch VU bits & mute */
+ wm8350_set_bits(wm8350, WM8350_LOUT1_VOLUME,
+ WM8350_OUT1_VU | WM8350_OUT1L_MUTE);
+ wm8350_set_bits(wm8350, WM8350_LOUT2_VOLUME,
+ WM8350_OUT2_VU | WM8350_OUT2L_MUTE);
+ wm8350_set_bits(wm8350, WM8350_ROUT1_VOLUME,
+ WM8350_OUT1_VU | WM8350_OUT1R_MUTE);
+ wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
+ WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
+
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create pcms\n");
+ return ret;
+ }
+
+ wm8350_add_controls(codec);
+ wm8350_add_widgets(codec);
+
+ wm8350_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to register card\n");
+ goto card_err;
+ }
+
+ return 0;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+ return ret;
+}
+
+static int wm8350_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+ struct wm8350 *wm8350 = codec->control_data;
+ int ret;
+
+ /* cancel any work waiting to be queued. */
+ ret = cancel_delayed_work(&codec->delayed_work);
+
+ /* if there was any work waiting then we run it now and
+ * wait for its completion */
+ if (ret) {
+ schedule_delayed_work(&codec->delayed_work, 0);
+ flush_scheduled_work();
+ }
+
+ wm8350_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CODEC_ENA);
+
+ return 0;
+}
+
+#define WM8350_RATES (SNDRV_PCM_RATE_8000_96000)
+
+#define WM8350_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+struct snd_soc_dai wm8350_dai = {
+ .name = "WM8350",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8350_RATES,
+ .formats = WM8350_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = WM8350_RATES,
+ .formats = WM8350_FORMATS,
+ },
+ .ops = {
+ .hw_params = wm8350_pcm_hw_params,
+ .digital_mute = wm8350_mute,
+ .trigger = wm8350_pcm_trigger,
+ .set_fmt = wm8350_set_dai_fmt,
+ .set_sysclk = wm8350_set_dai_sysclk,
+ .set_pll = wm8350_set_fll,
+ .set_clkdiv = wm8350_set_clkdiv,
+ },
+};
+EXPORT_SYMBOL_GPL(wm8350_dai);
+
+struct snd_soc_codec_device soc_codec_dev_wm8350 = {
+ .probe = wm8350_probe,
+ .remove = wm8350_remove,
+ .suspend = wm8350_suspend,
+ .resume = wm8350_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8350);
+
+static int wm8350_codec_probe(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct wm8350_data *priv;
+ struct snd_soc_codec *codec;
+ int ret, i;
+
+ if (wm8350->codec.platform_data == NULL) {
+ dev_err(&pdev->dev, "No audio platform data supplied\n");
+ return -EINVAL;
+ }
+
+ priv = kzalloc(sizeof(struct wm8350_data), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+ priv->supplies[i].supply = supply_names[i];
+
+ ret = regulator_bulk_get(wm8350->dev, ARRAY_SIZE(priv->supplies),
+ priv->supplies);
+ if (ret != 0)
+ goto err_priv;
+
+ codec = &priv->codec;
+ wm8350->codec.codec = codec;
+
+ wm8350_dai.dev = &pdev->dev;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+ codec->dev = &pdev->dev;
+ codec->name = "WM8350";
+ codec->owner = THIS_MODULE;
+ codec->read = wm8350_codec_read;
+ codec->write = wm8350_codec_write;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->set_bias_level = wm8350_set_bias_level;
+ codec->dai = &wm8350_dai;
+ codec->num_dai = 1;
+ codec->reg_cache_size = WM8350_MAX_REGISTER;
+ codec->private_data = priv;
+ codec->control_data = wm8350;
+
+ /* Put the codec into reset if it wasn't already */
+ wm8350_clear_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CODEC_ENA);
+
+ INIT_DELAYED_WORK(&codec->delayed_work, wm8350_pga_work);
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0)
+ goto err_supply;
+
+ wm8350_codec = codec;
+
+ ret = snd_soc_register_dai(&wm8350_dai);
+ if (ret != 0)
+ goto err_codec;
+ return 0;
+
+err_codec:
+ snd_soc_unregister_codec(codec);
+err_supply:
+ regulator_bulk_free(ARRAY_SIZE(priv->supplies), priv->supplies);
+err_priv:
+ kfree(priv);
+ wm8350_codec = NULL;
+ return ret;
+}
+
+static int __devexit wm8350_codec_remove(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = wm8350->codec.codec;
+ struct wm8350_data *priv = codec->private_data;
+
+ snd_soc_unregister_dai(&wm8350_dai);
+ snd_soc_unregister_codec(codec);
+ regulator_bulk_free(ARRAY_SIZE(priv->supplies), priv->supplies);
+ kfree(priv);
+ wm8350_codec = NULL;
+ return 0;
+}
+
+static struct platform_driver wm8350_codec_driver = {
+ .driver = {
+ .name = "wm8350-codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8350_codec_probe,
+ .remove = __devexit_p(wm8350_codec_remove),
+};
+
+static __init int wm8350_init(void)
+{
+ return platform_driver_register(&wm8350_codec_driver);
+}
+module_init(wm8350_init);
+
+static __exit void wm8350_exit(void)
+{
+ platform_driver_unregister(&wm8350_codec_driver);
+}
+module_exit(wm8350_exit);
+
+MODULE_DESCRIPTION("ASoC WM8350 driver");
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-codec");
--- /dev/null
+/*
+ * wm8350.h - WM8903 audio codec interface
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _WM8350_H
+#define _WM8350_H
+
+#include <sound/soc.h>
+
+extern struct snd_soc_dai wm8350_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8350;
+
+#endif
}
static int wm8510_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.formats = WM8510_FORMATS,},
.ops = {
.hw_params = wm8510_pcm_hw_params,
- },
- .dai_ops = {
.digital_mute = wm8510_mute,
.set_fmt = wm8510_set_dai_fmt,
.set_clkdiv = wm8510_set_dai_clkdiv,
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
wm8510_add_controls(codec);
wm8510_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8510: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8510);
+static int __init wm8510_modinit(void)
+{
+ return snd_soc_register_dai(&wm8510_dai);
+}
+module_init(wm8510_modinit);
+
+static void __exit wm8510_exit(void)
+{
+ snd_soc_unregister_dai(&wm8510_dai);
+}
+module_exit(wm8510_exit);
+
MODULE_DESCRIPTION("ASoC WM8510 driver");
MODULE_AUTHOR("Liam Girdwood");
MODULE_LICENSE("GPL");
* Set PCM DAI bit size and sample rate.
*/
static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai_link *dai = rtd->dai;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
- u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->codec_dai->id);
+ u16 paifb = wm8580_read(codec, WM8580_PAIF3 + dai->id);
paifb &= ~WM8580_AIF_LENGTH_MASK;
/* bit size */
return -EINVAL;
}
- wm8580_write(codec, WM8580_PAIF3 + dai->codec_dai->id, paifb);
+ wm8580_write(codec, WM8580_PAIF3 + dai->id, paifb);
return 0;
}
},
.ops = {
.hw_params = wm8580_paif_hw_params,
- },
- .dai_ops = {
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
},
.ops = {
.hw_params = wm8580_paif_hw_params,
- },
- .dai_ops = {
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
wm8580_add_controls(codec);
wm8580_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8580: failed to register card\n");
goto card_err;
* low = 0x1a
* high = 0x1b
*/
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-static struct i2c_driver wm8580_i2c_driver;
-static struct i2c_client client_template;
-
-static int wm8580_codec_probe(struct i2c_adapter *adap, int addr, int kind)
+static int wm8580_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
{
struct snd_soc_device *socdev = wm8580_socdev;
- struct wm8580_setup_data *setup = socdev->codec_data;
struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c;
int ret;
- if (addr != setup->i2c_address)
- return -ENODEV;
-
- client_template.adapter = adap;
- client_template.addr = addr;
-
- i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
- if (i2c == NULL) {
- kfree(codec);
- return -ENOMEM;
- }
i2c_set_clientdata(i2c, codec);
codec->control_data = i2c;
- ret = i2c_attach_client(i2c);
- if (ret < 0) {
- dev_err(&i2c->dev, "failed to attach codec at addr %x\n", addr);
- goto err;
- }
-
ret = wm8580_init(socdev);
- if (ret < 0) {
+ if (ret < 0)
dev_err(&i2c->dev, "failed to initialise WM8580\n");
- goto err;
- }
-
- return ret;
-
-err:
- kfree(codec);
- kfree(i2c);
return ret;
}
-static int wm8580_i2c_detach(struct i2c_client *client)
+static int wm8580_i2c_remove(struct i2c_client *client)
{
struct snd_soc_codec *codec = i2c_get_clientdata(client);
- i2c_detach_client(client);
kfree(codec->reg_cache);
- kfree(client);
return 0;
}
-static int wm8580_i2c_attach(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, wm8580_codec_probe);
-}
+static const struct i2c_device_id wm8580_i2c_id[] = {
+ { "wm8580", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id);
-/* corgi i2c codec control layer */
static struct i2c_driver wm8580_i2c_driver = {
.driver = {
.name = "WM8580 I2C Codec",
.owner = THIS_MODULE,
},
- .attach_adapter = wm8580_i2c_attach,
- .detach_client = wm8580_i2c_detach,
- .command = NULL,
+ .probe = wm8580_i2c_probe,
+ .remove = wm8580_i2c_remove,
+ .id_table = wm8580_i2c_id,
};
-static struct i2c_client client_template = {
- .name = "WM8580",
- .driver = &wm8580_i2c_driver,
-};
+static int wm8580_add_i2c_device(struct platform_device *pdev,
+ const struct wm8580_setup_data *setup)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+ int ret;
+
+ ret = i2c_add_driver(&wm8580_i2c_driver);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "can't add i2c driver\n");
+ return ret;
+ }
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = setup->i2c_address;
+ strlcpy(info.type, "wm8580", I2C_NAME_SIZE);
+
+ adapter = i2c_get_adapter(setup->i2c_bus);
+ if (!adapter) {
+ dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+ setup->i2c_bus);
+ goto err_driver;
+ }
+
+ client = i2c_new_device(adapter, &info);
+ i2c_put_adapter(adapter);
+ if (!client) {
+ dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+ (unsigned int)info.addr);
+ goto err_driver;
+ }
+
+ return 0;
+
+err_driver:
+ i2c_del_driver(&wm8580_i2c_driver);
+ return -ENODEV;
+}
#endif
static int wm8580_probe(struct platform_device *pdev)
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
if (setup->i2c_address) {
- normal_i2c[0] = setup->i2c_address;
codec->hw_write = (hw_write_t)i2c_master_send;
- ret = i2c_add_driver(&wm8580_i2c_driver);
- if (ret != 0)
- printk(KERN_ERR "can't add i2c driver");
+ ret = wm8580_add_i2c_device(pdev, setup);
}
#else
/* Add other interfaces here */
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_unregister_device(codec->control_data);
i2c_del_driver(&wm8580_i2c_driver);
#endif
kfree(codec->private_data);
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8580);
+static int __init wm8580_modinit(void)
+{
+ return snd_soc_register_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
+}
+module_init(wm8580_modinit);
+
+static void __exit wm8580_exit(void)
+{
+ snd_soc_unregister_dais(wm8580_dai, ARRAY_SIZE(wm8580_dai));
+}
+module_exit(wm8580_exit);
+
MODULE_DESCRIPTION("ASoC WM8580 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
#define WM8580_CLKSRC_NONE 5
struct wm8580_setup_data {
+ int i2c_bus;
unsigned short i2c_address;
};
--- /dev/null
+/*
+ * wm8728.c -- WM8728 ALSA SoC Audio driver
+ *
+ * Copyright 2008 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "wm8728.h"
+
+struct snd_soc_codec_device soc_codec_dev_wm8728;
+
+/*
+ * We can't read the WM8728 register space so we cache them instead.
+ * Note that the defaults here aren't the physical defaults, we latch
+ * the volume update bits, mute the output and enable infinite zero
+ * detect.
+ */
+static const u16 wm8728_reg_defaults[] = {
+ 0x1ff,
+ 0x1ff,
+ 0x001,
+ 0x100,
+};
+
+static inline unsigned int wm8728_read_reg_cache(struct snd_soc_codec *codec,
+ unsigned int reg)
+{
+ u16 *cache = codec->reg_cache;
+ BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults));
+ return cache[reg];
+}
+
+static inline void wm8728_write_reg_cache(struct snd_soc_codec *codec,
+ u16 reg, unsigned int value)
+{
+ u16 *cache = codec->reg_cache;
+ BUG_ON(reg > ARRAY_SIZE(wm8728_reg_defaults));
+ cache[reg] = value;
+}
+
+/*
+ * write to the WM8728 register space
+ */
+static int wm8728_write(struct snd_soc_codec *codec, unsigned int reg,
+ unsigned int value)
+{
+ u8 data[2];
+
+ /* data is
+ * D15..D9 WM8728 register offset
+ * D8...D0 register data
+ */
+ data[0] = (reg << 1) | ((value >> 8) & 0x0001);
+ data[1] = value & 0x00ff;
+
+ wm8728_write_reg_cache(codec, reg, value);
+
+ if (codec->hw_write(codec->control_data, data, 2) == 2)
+ return 0;
+ else
+ return -EIO;
+}
+
+static const DECLARE_TLV_DB_SCALE(wm8728_tlv, -12750, 50, 1);
+
+static const struct snd_kcontrol_new wm8728_snd_controls[] = {
+
+SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8728_DACLVOL, WM8728_DACRVOL,
+ 0, 255, 0, wm8728_tlv),
+
+SOC_SINGLE("Deemphasis", WM8728_DACCTL, 1, 1, 0),
+};
+
+static int wm8728_add_controls(struct snd_soc_codec *codec)
+{
+ int err, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm8728_snd_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&wm8728_snd_controls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * DAPM controls.
+ */
+static const struct snd_soc_dapm_widget wm8728_dapm_widgets[] = {
+SND_SOC_DAPM_DAC("DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_OUTPUT("VOUTL"),
+SND_SOC_DAPM_OUTPUT("VOUTR"),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+ {"VOUTL", NULL, "DAC"},
+ {"VOUTR", NULL, "DAC"},
+};
+
+static int wm8728_add_widgets(struct snd_soc_codec *codec)
+{
+ snd_soc_dapm_new_controls(codec, wm8728_dapm_widgets,
+ ARRAY_SIZE(wm8728_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
+
+ snd_soc_dapm_new_widgets(codec);
+
+ return 0;
+}
+
+static int wm8728_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+ u16 mute_reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+
+ if (mute)
+ wm8728_write(codec, WM8728_DACCTL, mute_reg | 1);
+ else
+ wm8728_write(codec, WM8728_DACCTL, mute_reg & ~1);
+
+ return 0;
+}
+
+static int wm8728_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ u16 dac = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+
+ dac &= ~0x18;
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+ break;
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ dac |= 0x10;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ dac |= 0x08;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8728_write(codec, WM8728_DACCTL, dac);
+
+ return 0;
+}
+
+static int wm8728_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int fmt)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ u16 iface = wm8728_read_reg_cache(codec, WM8728_IFCTL);
+
+ /* Currently only I2S is supported by the driver, though the
+ * hardware is more flexible.
+ */
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ iface |= 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* The hardware only support full slave mode */
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ iface &= ~0x22;
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ iface |= 0x20;
+ iface &= ~0x02;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ iface |= 0x02;
+ iface &= ~0x20;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ iface |= 0x22;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ wm8728_write(codec, WM8728_IFCTL, iface);
+ return 0;
+}
+
+static int wm8728_set_bias_level(struct snd_soc_codec *codec,
+ enum snd_soc_bias_level level)
+{
+ u16 reg;
+ int i;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ case SND_SOC_BIAS_STANDBY:
+ if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ /* Power everything up... */
+ reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ wm8728_write(codec, WM8728_DACCTL, reg & ~0x4);
+
+ /* ..then sync in the register cache. */
+ for (i = 0; i < ARRAY_SIZE(wm8728_reg_defaults); i++)
+ wm8728_write(codec, i,
+ wm8728_read_reg_cache(codec, i));
+ }
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ reg = wm8728_read_reg_cache(codec, WM8728_DACCTL);
+ wm8728_write(codec, WM8728_DACCTL, reg | 0x4);
+ break;
+ }
+ codec->bias_level = level;
+ return 0;
+}
+
+#define WM8728_RATES (SNDRV_PCM_RATE_8000_192000)
+
+#define WM8728_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
+ SNDRV_PCM_FMTBIT_S24_LE)
+
+struct snd_soc_dai wm8728_dai = {
+ .name = "WM8728",
+ .playback = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = WM8728_RATES,
+ .formats = WM8728_FORMATS,
+ },
+ .ops = {
+ .hw_params = wm8728_hw_params,
+ .digital_mute = wm8728_mute,
+ .set_fmt = wm8728_set_dai_fmt,
+ }
+};
+EXPORT_SYMBOL_GPL(wm8728_dai);
+
+static int wm8728_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ return 0;
+}
+
+static int wm8728_resume(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ wm8728_set_bias_level(codec, codec->suspend_bias_level);
+
+ return 0;
+}
+
+/*
+ * initialise the WM8728 driver
+ * register the mixer and dsp interfaces with the kernel
+ */
+static int wm8728_init(struct snd_soc_device *socdev)
+{
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret = 0;
+
+ codec->name = "WM8728";
+ codec->owner = THIS_MODULE;
+ codec->read = wm8728_read_reg_cache;
+ codec->write = wm8728_write;
+ codec->set_bias_level = wm8728_set_bias_level;
+ codec->dai = &wm8728_dai;
+ codec->num_dai = 1;
+ codec->bias_level = SND_SOC_BIAS_OFF;
+ codec->reg_cache_size = ARRAY_SIZE(wm8728_reg_defaults);
+ codec->reg_cache = kmemdup(wm8728_reg_defaults,
+ sizeof(wm8728_reg_defaults),
+ GFP_KERNEL);
+ if (codec->reg_cache == NULL)
+ return -ENOMEM;
+
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8728: failed to create pcms\n");
+ goto pcm_err;
+ }
+
+ /* power on device */
+ wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
+ wm8728_add_controls(codec);
+ wm8728_add_widgets(codec);
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8728: failed to register card\n");
+ goto card_err;
+ }
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
+ kfree(codec->reg_cache);
+ return ret;
+}
+
+static struct snd_soc_device *wm8728_socdev;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+
+/*
+ * WM8728 2 wire address is determined by GPIO5
+ * state during powerup.
+ * low = 0x1a
+ * high = 0x1b
+ */
+
+static int wm8728_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct snd_soc_device *socdev = wm8728_socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret;
+
+ i2c_set_clientdata(i2c, codec);
+ codec->control_data = i2c;
+
+ ret = wm8728_init(socdev);
+ if (ret < 0)
+ pr_err("failed to initialise WM8728\n");
+
+ return ret;
+}
+
+static int wm8728_i2c_remove(struct i2c_client *client)
+{
+ struct snd_soc_codec *codec = i2c_get_clientdata(client);
+ kfree(codec->reg_cache);
+ return 0;
+}
+
+static const struct i2c_device_id wm8728_i2c_id[] = {
+ { "wm8728", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8728_i2c_id);
+
+static struct i2c_driver wm8728_i2c_driver = {
+ .driver = {
+ .name = "WM8728 I2C Codec",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8728_i2c_probe,
+ .remove = wm8728_i2c_remove,
+ .id_table = wm8728_i2c_id,
+};
+
+static int wm8728_add_i2c_device(struct platform_device *pdev,
+ const struct wm8728_setup_data *setup)
+{
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+ int ret;
+
+ ret = i2c_add_driver(&wm8728_i2c_driver);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "can't add i2c driver\n");
+ return ret;
+ }
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = setup->i2c_address;
+ strlcpy(info.type, "wm8728", I2C_NAME_SIZE);
+
+ adapter = i2c_get_adapter(setup->i2c_bus);
+ if (!adapter) {
+ dev_err(&pdev->dev, "can't get i2c adapter %d\n",
+ setup->i2c_bus);
+ goto err_driver;
+ }
+
+ client = i2c_new_device(adapter, &info);
+ i2c_put_adapter(adapter);
+ if (!client) {
+ dev_err(&pdev->dev, "can't add i2c device at 0x%x\n",
+ (unsigned int)info.addr);
+ goto err_driver;
+ }
+
+ return 0;
+
+err_driver:
+ i2c_del_driver(&wm8728_i2c_driver);
+ return -ENODEV;
+}
+#endif
+
+#if defined(CONFIG_SPI_MASTER)
+static int __devinit wm8728_spi_probe(struct spi_device *spi)
+{
+ struct snd_soc_device *socdev = wm8728_socdev;
+ struct snd_soc_codec *codec = socdev->codec;
+ int ret;
+
+ codec->control_data = spi;
+
+ ret = wm8728_init(socdev);
+ if (ret < 0)
+ dev_err(&spi->dev, "failed to initialise WM8728\n");
+
+ return ret;
+}
+
+static int __devexit wm8728_spi_remove(struct spi_device *spi)
+{
+ return 0;
+}
+
+static struct spi_driver wm8728_spi_driver = {
+ .driver = {
+ .name = "wm8728",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm8728_spi_probe,
+ .remove = __devexit_p(wm8728_spi_remove),
+};
+
+static int wm8728_spi_write(struct spi_device *spi, const char *data, int len)
+{
+ struct spi_transfer t;
+ struct spi_message m;
+ u8 msg[2];
+
+ if (len <= 0)
+ return 0;
+
+ msg[0] = data[0];
+ msg[1] = data[1];
+
+ spi_message_init(&m);
+ memset(&t, 0, (sizeof t));
+
+ t.tx_buf = &msg[0];
+ t.len = len;
+
+ spi_message_add_tail(&t, &m);
+ spi_sync(spi, &m);
+
+ return len;
+}
+#endif /* CONFIG_SPI_MASTER */
+
+static int wm8728_probe(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct wm8728_setup_data *setup;
+ struct snd_soc_codec *codec;
+ int ret = 0;
+
+ setup = socdev->codec_data;
+ codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
+ if (codec == NULL)
+ return -ENOMEM;
+
+ socdev->codec = codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ wm8728_socdev = socdev;
+ ret = -ENODEV;
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ if (setup->i2c_address) {
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ ret = wm8728_add_i2c_device(pdev, setup);
+ }
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ if (setup->spi) {
+ codec->hw_write = (hw_write_t)wm8728_spi_write;
+ ret = spi_register_driver(&wm8728_spi_driver);
+ if (ret != 0)
+ printk(KERN_ERR "can't add spi driver");
+ }
+#endif
+
+ if (ret != 0)
+ kfree(codec);
+
+ return ret;
+}
+
+/* power down chip */
+static int wm8728_remove(struct platform_device *pdev)
+{
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_codec *codec = socdev->codec;
+
+ if (codec->control_data)
+ wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF);
+
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+ i2c_unregister_device(codec->control_data);
+ i2c_del_driver(&wm8728_i2c_driver);
+#endif
+#if defined(CONFIG_SPI_MASTER)
+ spi_unregister_driver(&wm8728_spi_driver);
+#endif
+ kfree(codec);
+
+ return 0;
+}
+
+struct snd_soc_codec_device soc_codec_dev_wm8728 = {
+ .probe = wm8728_probe,
+ .remove = wm8728_remove,
+ .suspend = wm8728_suspend,
+ .resume = wm8728_resume,
+};
+EXPORT_SYMBOL_GPL(soc_codec_dev_wm8728);
+
+static int __init wm8728_modinit(void)
+{
+ return snd_soc_register_dai(&wm8728_dai);
+}
+module_init(wm8728_modinit);
+
+static void __exit wm8728_exit(void)
+{
+ snd_soc_unregister_dai(&wm8728_dai);
+}
+module_exit(wm8728_exit);
+
+MODULE_DESCRIPTION("ASoC WM8728 driver");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * wm8728.h -- WM8728 ASoC codec driver
+ *
+ * Copyright 2008 Wolfson Microelectronics plc
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _WM8728_H
+#define _WM8728_H
+
+#define WM8728_DACLVOL 0x00
+#define WM8728_DACRVOL 0x01
+#define WM8728_DACCTL 0x02
+#define WM8728_IFCTL 0x03
+
+struct wm8728_setup_data {
+ int spi;
+ int i2c_bus;
+ unsigned short i2c_address;
+};
+
+extern struct snd_soc_dai wm8728_dai;
+extern struct snd_soc_codec_device soc_codec_dev_wm8728;
+
+#endif
}
static int wm8731_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static int wm8731_pcm_prepare(struct snd_pcm_substream *substream)
+static int wm8731_pcm_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static void wm8731_shutdown(struct snd_pcm_substream *substream)
+static void wm8731_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.prepare = wm8731_pcm_prepare,
.hw_params = wm8731_hw_params,
.shutdown = wm8731_shutdown,
- },
- .dai_ops = {
.digital_mute = wm8731_mute,
.set_sysclk = wm8731_set_dai_sysclk,
.set_fmt = wm8731_set_dai_fmt,
wm8731_add_controls(codec);
wm8731_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8731: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8731);
+static int __init wm8731_modinit(void)
+{
+ return snd_soc_register_dai(&wm8731_dai);
+}
+module_init(wm8731_modinit);
+
+static void __exit wm8731_exit(void)
+{
+ snd_soc_unregister_dai(&wm8731_dai);
+}
+module_exit(wm8731_exit);
+
MODULE_DESCRIPTION("ASoC WM8731 driver");
MODULE_AUTHOR("Richard Purdie");
MODULE_LICENSE("GPL");
}
static int wm8750_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.formats = WM8750_FORMATS,},
.ops = {
.hw_params = wm8750_pcm_hw_params,
- },
- .dai_ops = {
.digital_mute = wm8750_mute,
.set_fmt = wm8750_set_dai_fmt,
.set_sysclk = wm8750_set_dai_sysclk,
wm8750_add_controls(codec);
wm8750_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8750: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8750);
+static int __init wm8750_modinit(void)
+{
+ return snd_soc_register_dai(&wm8750_dai);
+}
+module_init(wm8750_modinit);
+
+static void __exit wm8750_exit(void)
+{
+ snd_soc_unregister_dai(&wm8750_dai);
+}
+module_exit(wm8750_exit);
+
MODULE_DESCRIPTION("ASoC WM8750 driver");
MODULE_AUTHOR("Liam Girdwood");
MODULE_LICENSE("GPL");
* Set PCM DAI bit size and sample rate.
*/
static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
* Set PCM DAI bit size and sample rate.
*/
static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.channels_min = 1,
.channels_max = 2,
.rates = WM8753_RATES,
- .formats = WM8753_FORMATS,},
+ .formats = WM8753_FORMATS},
.capture = { /* dummy for fast DAI switching */
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM8753_RATES,
- .formats = WM8753_FORMATS,},
+ .formats = WM8753_FORMATS},
.ops = {
- .hw_params = wm8753_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = wm8753_i2s_hw_params,
.digital_mute = wm8753_mute,
.set_fmt = wm8753_mode1h_set_dai_fmt,
.set_clkdiv = wm8753_set_dai_clkdiv,
.rates = WM8753_RATES,
.formats = WM8753_FORMATS,},
.ops = {
- .hw_params = wm8753_pcm_hw_params,},
- .dai_ops = {
+ .hw_params = wm8753_pcm_hw_params,
.digital_mute = wm8753_mute,
.set_fmt = wm8753_mode1v_set_dai_fmt,
.set_clkdiv = wm8753_set_dai_clkdiv,
.rates = WM8753_RATES,
.formats = WM8753_FORMATS,},
.ops = {
- .hw_params = wm8753_pcm_hw_params,},
- .dai_ops = {
+ .hw_params = wm8753_pcm_hw_params,
.digital_mute = wm8753_mute,
.set_fmt = wm8753_mode2_set_dai_fmt,
.set_clkdiv = wm8753_set_dai_clkdiv,
.rates = WM8753_RATES,
.formats = WM8753_FORMATS,},
.ops = {
- .hw_params = wm8753_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = wm8753_i2s_hw_params,
.digital_mute = wm8753_mute,
.set_fmt = wm8753_mode3_4_set_dai_fmt,
.set_clkdiv = wm8753_set_dai_clkdiv,
.rates = WM8753_RATES,
.formats = WM8753_FORMATS,},
.ops = {
- .hw_params = wm8753_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = wm8753_i2s_hw_params,
.digital_mute = wm8753_mute,
.set_fmt = wm8753_mode3_4_set_dai_fmt,
.set_clkdiv = wm8753_set_dai_clkdiv,
wm8753_add_controls(codec);
wm8753_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8753: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8753);
+static int __init wm8753_modinit(void)
+{
+ return snd_soc_register_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai));
+}
+module_init(wm8753_modinit);
+
+static void __exit wm8753_exit(void)
+{
+ snd_soc_unregister_dais(wm8753_dai, ARRAY_SIZE(wm8753_dai));
+}
+module_exit(wm8753_exit);
+
MODULE_DESCRIPTION("ASoC WM8753 driver");
MODULE_AUTHOR("Liam Girdwood");
MODULE_LICENSE("GPL");
struct snd_soc_codec_device soc_codec_dev_wm8900;
struct wm8900_priv {
+ struct snd_soc_codec codec;
+
+ u16 reg_cache[WM8900_MAXREG];
+
u32 fll_in; /* FLL input frequency */
u32 fll_out; /* FLL output frequency */
};
}
static int wm8900_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
},
.ops = {
.hw_params = wm8900_hw_params,
- },
- .dai_ops = {
.set_clkdiv = wm8900_set_dai_clkdiv,
.set_pll = wm8900_set_dai_pll,
.set_fmt = wm8900_set_dai_fmt,
return 0;
}
-/*
- * initialise the WM8900 driver
- * register the mixer and dsp interfaces with the kernel
- */
-static int wm8900_init(struct snd_soc_device *socdev)
+static struct snd_soc_codec *wm8900_codec;
+
+static int wm8900_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
{
- struct snd_soc_codec *codec = socdev->codec;
- int ret = 0;
+ struct wm8900_priv *wm8900;
+ struct snd_soc_codec *codec;
unsigned int reg;
- struct i2c_client *i2c_client = socdev->codec->control_data;
+ int ret;
+
+ wm8900 = kzalloc(sizeof(struct wm8900_priv), GFP_KERNEL);
+ if (wm8900 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8900->codec;
+ codec->private_data = wm8900;
+ codec->reg_cache = &wm8900->reg_cache[0];
+ codec->reg_cache_size = WM8900_MAXREG;
+
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "WM8900";
codec->owner = THIS_MODULE;
codec->write = wm8900_write;
codec->dai = &wm8900_dai;
codec->num_dai = 1;
- codec->reg_cache_size = WM8900_MAXREG;
- codec->reg_cache = kmemdup(wm8900_reg_defaults,
- sizeof(wm8900_reg_defaults), GFP_KERNEL);
-
- if (codec->reg_cache == NULL)
- return -ENOMEM;
+ codec->hw_write = (hw_write_t)i2c_master_send;
+ codec->control_data = i2c;
+ codec->set_bias_level = wm8900_set_bias_level;
+ codec->dev = &i2c->dev;
reg = wm8900_read(codec, WM8900_REG_ID);
if (reg != 0x8900) {
- dev_err(&i2c_client->dev, "Device is not a WM8900 - ID %x\n",
- reg);
- return -ENODEV;
- }
-
- codec->private_data = kzalloc(sizeof(struct wm8900_priv), GFP_KERNEL);
- if (codec->private_data == NULL) {
- ret = -ENOMEM;
- goto priv_err;
+ dev_err(&i2c->dev, "Device is not a WM8900 - ID %x\n", reg);
+ ret = -ENODEV;
+ goto err;
}
/* Read back from the chip */
reg = wm8900_chip_read(codec, WM8900_REG_POWER1);
reg = (reg >> 12) & 0xf;
- dev_info(&i2c_client->dev, "WM8900 revision %d\n", reg);
+ dev_info(&i2c->dev, "WM8900 revision %d\n", reg);
wm8900_reset(codec);
+ /* Turn the chip on */
+ wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
+
/* Latch the volume update bits */
wm8900_write(codec, WM8900_REG_LINVOL,
wm8900_read(codec, WM8900_REG_LINVOL) | 0x100);
/* Set the DAC and mixer output bias */
wm8900_write(codec, WM8900_REG_OUTBIASCTL, 0x81);
- /* Register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- dev_err(&i2c_client->dev, "Failed to register new PCMs\n");
- goto pcm_err;
- }
-
- /* Turn the chip on */
- codec->bias_level = SND_SOC_BIAS_OFF;
- wm8900_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
- wm8900_add_controls(codec);
- wm8900_add_widgets(codec);
-
- ret = snd_soc_register_card(socdev);
- if (ret < 0) {
- dev_err(&i2c_client->dev, "Failed to register card\n");
- goto card_err;
- }
- return ret;
-
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-pcm_err:
- kfree(codec->reg_cache);
-priv_err:
- kfree(codec->private_data);
- return ret;
-}
+ wm8900_dai.dev = &i2c->dev;
-static struct snd_soc_device *wm8900_socdev;
+ wm8900_codec = codec;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-
-static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END };
-
-/* Magic definition of all other variables and things */
-I2C_CLIENT_INSMOD;
-
-static struct i2c_driver wm8900_i2c_driver;
-static struct i2c_client client_template;
-
-/* If the i2c layer weren't so broken, we could pass this kind of data
- around */
-static int wm8900_codec_probe(struct i2c_adapter *adap, int addr, int kind)
-{
- struct snd_soc_device *socdev = wm8900_socdev;
- struct wm8900_setup_data *setup = socdev->codec_data;
- struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c;
- int ret;
-
- if (addr != setup->i2c_address)
- return -ENODEV;
-
- dev_err(&adap->dev, "Probe on %x\n", addr);
-
- client_template.adapter = adap;
- client_template.addr = addr;
-
- i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
- if (i2c == NULL) {
- kfree(codec);
- return -ENOMEM;
- }
- i2c_set_clientdata(i2c, codec);
- codec->control_data = i2c;
-
- ret = i2c_attach_client(i2c);
- if (ret < 0) {
- dev_err(&adap->dev,
- "failed to attach codec at addr %x\n", addr);
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
goto err;
}
- ret = wm8900_init(socdev);
- if (ret < 0) {
- dev_err(&adap->dev, "failed to initialise WM8900\n");
- goto err;
+ ret = snd_soc_register_dai(&wm8900_dai);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
}
+
return ret;
+err_codec:
+ snd_soc_unregister_codec(codec);
err:
- kfree(codec);
- kfree(i2c);
+ kfree(wm8900);
+ wm8900_codec = NULL;
return ret;
}
-static int wm8900_i2c_detach(struct i2c_client *client)
+static int wm8900_i2c_remove(struct i2c_client *client)
{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- i2c_detach_client(client);
- kfree(codec->reg_cache);
- kfree(client);
+ snd_soc_unregister_dai(&wm8900_dai);
+ snd_soc_unregister_codec(wm8900_codec);
+
+ wm8900_set_bias_level(wm8900_codec, SND_SOC_BIAS_OFF);
+
+ wm8900_dai.dev = NULL;
+ kfree(wm8900_codec->private_data);
+ wm8900_codec = NULL;
+
return 0;
}
-static int wm8900_i2c_attach(struct i2c_adapter *adap)
-{
- return i2c_probe(adap, &addr_data, wm8900_codec_probe);
-}
+static const struct i2c_device_id wm8900_i2c_id[] = {
+ { "wm8900", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8900_i2c_id);
-/* corgi i2c codec control layer */
static struct i2c_driver wm8900_i2c_driver = {
.driver = {
- .name = "WM8900 I2C codec",
+ .name = "WM8900",
.owner = THIS_MODULE,
},
- .attach_adapter = wm8900_i2c_attach,
- .detach_client = wm8900_i2c_detach,
- .command = NULL,
-};
-
-static struct i2c_client client_template = {
- .name = "WM8900",
- .driver = &wm8900_i2c_driver,
+ .probe = wm8900_i2c_probe,
+ .remove = wm8900_i2c_remove,
+ .id_table = wm8900_i2c_id,
};
-#endif
static int wm8900_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct wm8900_setup_data *setup;
struct snd_soc_codec *codec;
int ret = 0;
- dev_info(&pdev->dev, "WM8900 Audio Codec\n");
-
- setup = socdev->codec_data;
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
-
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
+ if (!wm8900_codec) {
+ dev_err(&pdev->dev, "I2C client not yet instantiated\n");
+ return -ENODEV;
+ }
+ codec = wm8900_codec;
socdev->codec = codec;
- codec->set_bias_level = wm8900_set_bias_level;
+ /* Register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register new PCMs\n");
+ goto pcm_err;
+ }
- wm8900_socdev = socdev;
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- if (setup->i2c_address) {
- normal_i2c[0] = setup->i2c_address;
- codec->hw_write = (hw_write_t)i2c_master_send;
- ret = i2c_add_driver(&wm8900_i2c_driver);
- if (ret != 0)
- printk(KERN_ERR "can't add i2c driver");
+ wm8900_add_controls(codec);
+ wm8900_add_widgets(codec);
+
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register card\n");
+ goto card_err;
}
-#else
-#error Non-I2C interfaces not yet supported
-#endif
+
+ return ret;
+
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+pcm_err:
return ret;
}
static int wm8900_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_codec *codec = socdev->codec;
-
- if (codec->control_data)
- wm8900_set_bias_level(codec, SND_SOC_BIAS_OFF);
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
-#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
- i2c_del_driver(&wm8900_i2c_driver);
-#endif
- kfree(codec);
return 0;
}
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8900);
+static int __init wm8900_modinit(void)
+{
+ return i2c_add_driver(&wm8900_i2c_driver);
+}
+module_init(wm8900_modinit);
+
+static void __exit wm8900_exit(void)
+{
+ i2c_del_driver(&wm8900_i2c_driver);
+}
+module_exit(wm8900_exit);
+
MODULE_DESCRIPTION("ASoC WM8900 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfonmicro.com>");
MODULE_LICENSE("GPL");
#define WM8900_DAC_CLKDIV_5_5 0x14
#define WM8900_DAC_CLKDIV_6 0x18
-#define WM8900_
-
-struct wm8900_setup_data {
- unsigned short i2c_address;
-};
-
extern struct snd_soc_dai wm8900_dai;
extern struct snd_soc_codec_device soc_codec_dev_wm8900;
#include "wm8903.h"
-struct wm8903_priv {
- int sysclk;
-
- /* Reference counts */
- int charge_pump_users;
- int class_w_users;
- int playback_active;
- int capture_active;
-
- struct snd_pcm_substream *master_substream;
- struct snd_pcm_substream *slave_substream;
-};
-
/* Register defaults at reset */
static u16 wm8903_reg_defaults[] = {
0x8903, /* R0 - SW Reset and ID */
0x0000, /* R172 - Analogue Output Bias 0 */
};
+struct wm8903_priv {
+ struct snd_soc_codec codec;
+ u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
+
+ int sysclk;
+
+ /* Reference counts */
+ int charge_pump_users;
+ int class_w_users;
+ int playback_active;
+ int capture_active;
+
+ struct snd_pcm_substream *master_substream;
+ struct snd_pcm_substream *slave_substream;
+};
+
+
static unsigned int wm8903_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
{
static void wm8903_reset(struct snd_soc_codec *codec)
{
wm8903_write(codec, WM8903_SW_RESET_AND_ID, 0);
+ memcpy(codec->reg_cache, wm8903_reg_defaults,
+ sizeof(wm8903_reg_defaults));
}
#define WM8903_OUTPUT_SHORT 0x8
break;
default:
BUG();
+ return -EINVAL; /* Spurious warning from some compilers */
}
switch (w->shift) {
break;
default:
BUG();
+ return -EINVAL; /* Spurious warning from some compilers */
}
if (event & SND_SOC_DAPM_PRE_PMU) {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
-SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new right_output_mixer[] = {
SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
-SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
+SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
};
static const struct snd_kcontrol_new left_speaker_mixer[] = {
SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
- 1, 1, 0),
+ 0, 1, 0),
};
static const struct snd_kcontrol_new right_speaker_mixer[] = {
SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
1, 1, 0),
SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
- 1, 1, 0),
+ 0, 1, 0),
};
static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
+ wm8903_write(codec, WM8903_CLOCK_RATES_2,
+ WM8903_CLK_SYS_ENA);
+
wm8903_run_sequence(codec, 0);
wm8903_sync_reg_cache(codec, codec->reg_cache);
case SND_SOC_BIAS_OFF:
wm8903_run_sequence(codec, 32);
+ reg = wm8903_read(codec, WM8903_CLOCK_RATES_2);
+ reg &= ~WM8903_CLK_SYS_ENA;
+ wm8903_write(codec, WM8903_CLOCK_RATES_2, reg);
break;
}
{ 0, 0 },
};
-static int wm8903_startup(struct snd_pcm_substream *substream)
+static int wm8903_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
return 0;
}
-static void wm8903_shutdown(struct snd_pcm_substream *substream)
+static void wm8903_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
}
static int wm8903_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.startup = wm8903_startup,
.shutdown = wm8903_shutdown,
.hw_params = wm8903_hw_params,
- },
- .dai_ops = {
.digital_mute = wm8903_digital_mute,
.set_fmt = wm8903_set_dai_fmt,
.set_sysclk = wm8903_set_dai_sysclk
return 0;
}
-/*
- * initialise the WM8903 driver
- * register the mixer and dsp interfaces with the kernel
- */
-static int wm8903_init(struct snd_soc_device *socdev)
+static struct snd_soc_codec *wm8903_codec;
+
+static int wm8903_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
{
- struct snd_soc_codec *codec = socdev->codec;
- struct i2c_client *i2c = codec->control_data;
- int ret = 0;
+ struct wm8903_priv *wm8903;
+ struct snd_soc_codec *codec;
+ int ret;
u16 val;
- val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
- if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
- dev_err(&i2c->dev,
- "Device with ID register %x is not a WM8903\n", val);
- return -ENODEV;
- }
+ wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+ if (wm8903 == NULL)
+ return -ENOMEM;
+
+ codec = &wm8903->codec;
+ mutex_init(&codec->mutex);
+ INIT_LIST_HEAD(&codec->dapm_widgets);
+ INIT_LIST_HEAD(&codec->dapm_paths);
+
+ codec->dev = &i2c->dev;
codec->name = "WM8903";
codec->owner = THIS_MODULE;
codec->read = wm8903_read;
codec->write = wm8903_write;
+ codec->hw_write = (hw_write_t)i2c_master_send;
codec->bias_level = SND_SOC_BIAS_OFF;
codec->set_bias_level = wm8903_set_bias_level;
codec->dai = &wm8903_dai;
codec->num_dai = 1;
- codec->reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults);
- codec->reg_cache = kmemdup(wm8903_reg_defaults,
- sizeof(wm8903_reg_defaults),
- GFP_KERNEL);
- if (codec->reg_cache == NULL) {
- dev_err(&i2c->dev, "Failed to allocate register cache\n");
- return -ENOMEM;
+ codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
+ codec->reg_cache = &wm8903->reg_cache[0];
+ codec->private_data = wm8903;
+
+ i2c_set_clientdata(i2c, codec);
+ codec->control_data = i2c;
+
+ val = wm8903_hw_read(codec, WM8903_SW_RESET_AND_ID);
+ if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
+ dev_err(&i2c->dev,
+ "Device with ID register %x is not a WM8903\n", val);
+ return -ENODEV;
}
val = wm8903_read(codec, WM8903_REVISION_NUMBER);
wm8903_reset(codec);
- /* register pcms */
- ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
- if (ret < 0) {
- dev_err(&i2c->dev, "failed to create pcms\n");
- goto pcm_err;
- }
-
- /* SYSCLK is required for pretty much anything */
- wm8903_write(codec, WM8903_CLOCK_RATES_2, WM8903_CLK_SYS_ENA);
-
/* power on device */
wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
val |= WM8903_DAC_MUTEMODE;
wm8903_write(codec, WM8903_DAC_DIGITAL_1, val);
- wm8903_add_controls(codec);
- wm8903_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
- if (ret < 0) {
- dev_err(&i2c->dev, "wm8903: failed to register card\n");
- goto card_err;
+ wm8903_dai.dev = &i2c->dev;
+ wm8903_codec = codec;
+
+ ret = snd_soc_register_codec(codec);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
+ goto err;
+ }
+
+ ret = snd_soc_register_dai(&wm8903_dai);
+ if (ret != 0) {
+ dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
+ goto err_codec;
}
return ret;
-card_err:
- snd_soc_free_pcms(socdev);
- snd_soc_dapm_free(socdev);
-pcm_err:
- kfree(codec->reg_cache);
+err_codec:
+ snd_soc_unregister_codec(codec);
+err:
+ wm8903_codec = NULL;
+ kfree(wm8903);
return ret;
}
-static struct snd_soc_device *wm8903_socdev;
-
-static int wm8903_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int wm8903_i2c_remove(struct i2c_client *client)
{
- struct snd_soc_device *socdev = wm8903_socdev;
- struct snd_soc_codec *codec = socdev->codec;
- int ret;
+ struct snd_soc_codec *codec = i2c_get_clientdata(client);
- i2c_set_clientdata(i2c, codec);
- codec->control_data = i2c;
+ snd_soc_unregister_dai(&wm8903_dai);
+ snd_soc_unregister_codec(codec);
- ret = wm8903_init(socdev);
- if (ret < 0)
- dev_err(&i2c->dev, "Device initialisation failed\n");
+ wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
- return ret;
-}
+ kfree(codec->private_data);
+
+ wm8903_codec = NULL;
+ wm8903_dai.dev = NULL;
-static int wm8903_i2c_remove(struct i2c_client *client)
-{
- struct snd_soc_codec *codec = i2c_get_clientdata(client);
- kfree(codec->reg_cache);
return 0;
}
static int wm8903_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct wm8903_setup_data *setup;
- struct snd_soc_codec *codec;
- struct wm8903_priv *wm8903;
- struct i2c_board_info board_info;
- struct i2c_adapter *adapter;
- struct i2c_client *i2c_client;
int ret = 0;
- setup = socdev->codec_data;
-
- if (!setup->i2c_address) {
- dev_err(&pdev->dev, "No codec address provided\n");
- return -ENODEV;
+ if (!wm8903_codec) {
+ dev_err(&pdev->dev, "I2C device not yet probed\n");
+ goto err;
}
- codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
- if (codec == NULL)
- return -ENOMEM;
+ socdev->codec = wm8903_codec;
- wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
- if (wm8903 == NULL) {
- ret = -ENOMEM;
- goto err_codec;
+ /* register pcms */
+ ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to create pcms\n");
+ goto err;
}
- codec->private_data = wm8903;
- socdev->codec = codec;
- mutex_init(&codec->mutex);
- INIT_LIST_HEAD(&codec->dapm_widgets);
- INIT_LIST_HEAD(&codec->dapm_paths);
-
- wm8903_socdev = socdev;
+ wm8903_add_controls(socdev->codec);
+ wm8903_add_widgets(socdev->codec);
- codec->hw_write = (hw_write_t)i2c_master_send;
- ret = i2c_add_driver(&wm8903_i2c_driver);
- if (ret != 0) {
- dev_err(&pdev->dev, "can't add i2c driver\n");
- goto err_priv;
- } else {
- memset(&board_info, 0, sizeof(board_info));
- strlcpy(board_info.type, "wm8903", I2C_NAME_SIZE);
- board_info.addr = setup->i2c_address;
-
- adapter = i2c_get_adapter(setup->i2c_bus);
- if (!adapter) {
- dev_err(&pdev->dev, "Can't get I2C bus %d\n",
- setup->i2c_bus);
- ret = -ENODEV;
- goto err_adapter;
- }
-
- i2c_client = i2c_new_device(adapter, &board_info);
- i2c_put_adapter(adapter);
- if (i2c_client == NULL) {
- dev_err(&pdev->dev,
- "I2C driver registration failed\n");
- ret = -ENODEV;
- goto err_adapter;
- }
+ ret = snd_soc_init_card(socdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "wm8903: failed to register card\n");
+ goto card_err;
}
return ret;
-err_adapter:
- i2c_del_driver(&wm8903_i2c_driver);
-err_priv:
- kfree(codec->private_data);
-err_codec:
- kfree(codec);
+card_err:
+ snd_soc_free_pcms(socdev);
+ snd_soc_dapm_free(socdev);
+err:
return ret;
}
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
- i2c_unregister_device(socdev->codec->control_data);
- i2c_del_driver(&wm8903_i2c_driver);
- kfree(codec->private_data);
- kfree(codec);
return 0;
}
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
+static int __init wm8903_modinit(void)
+{
+ return i2c_add_driver(&wm8903_i2c_driver);
+}
+module_init(wm8903_modinit);
+
+static void __exit wm8903_exit(void)
+{
+ i2c_del_driver(&wm8903_i2c_driver);
+}
+module_exit(wm8903_exit);
+
MODULE_DESCRIPTION("ASoC WM8903 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
MODULE_LICENSE("GPL");
extern struct snd_soc_dai wm8903_dai;
extern struct snd_soc_codec_device soc_codec_dev_wm8903;
-struct wm8903_setup_data {
- int i2c_bus;
- int i2c_address;
-};
-
#define WM8903_MCLK_DIV_2 1
#define WM8903_CLK_SYS 2
#define WM8903_BCLK 3
}
static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
.formats = WM8971_FORMATS,},
.ops = {
.hw_params = wm8971_pcm_hw_params,
- },
- .dai_ops = {
.digital_mute = wm8971_mute,
.set_fmt = wm8971_set_dai_fmt,
.set_sysclk = wm8971_set_dai_sysclk,
wm8971_add_controls(codec);
wm8971_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8971: failed to register card\n");
goto card_err;
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8971);
+static int __init wm8971_modinit(void)
+{
+ return snd_soc_register_dai(&wm8971_dai);
+}
+module_init(wm8971_modinit);
+
+static void __exit wm8971_exit(void)
+{
+ snd_soc_unregister_dai(&wm8971_dai);
+}
+module_exit(wm8971_exit);
+
MODULE_DESCRIPTION("ASoC WM8971 driver");
MODULE_AUTHOR("Lab126");
MODULE_LICENSE("GPL");
0x0008, /* R60 - PLL1 */
0x0031, /* R61 - PLL2 */
0x0026, /* R62 - PLL3 */
+ 0x0000, /* R63 - Driver internal */
};
/*
unsigned int reg, unsigned int value)
{
u16 *cache = codec->reg_cache;
- BUG_ON(reg > (ARRAY_SIZE(wm8990_reg)) - 1);
- /* Reset register is uncached */
- if (reg == 0)
+ /* Reset register and reserved registers are uncached */
+ if (reg == 0 || reg > ARRAY_SIZE(wm8990_reg) - 1)
return;
cache[reg] = value;
* Set PCM DAI bit size and sample rate.
*/
static int wm8990_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
switch (level) {
case SND_SOC_BIAS_ON:
break;
+
case SND_SOC_BIAS_PREPARE:
+ /* VMID=2*50k */
+ val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ ~WM8990_VMID_MODE_MASK;
+ wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x2);
break;
+
case SND_SOC_BIAS_STANDBY:
if (codec->bias_level == SND_SOC_BIAS_OFF) {
/* Enable all output discharge bits */
/* disable POBCTRL, SOFT_ST and BUFDCOPEN */
wm8990_write(codec, WM8990_ANTIPOP2, WM8990_BUFIOEN);
- } else {
- /* ON -> standby */
+ /* Enable workaround for ADC clocking issue. */
+ wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0x2);
+ wm8990_write(codec, WM8990_EXT_CTL1, 0xa003);
+ wm8990_write(codec, WM8990_EXT_ACCESS_ENA, 0);
}
+
+ /* VMID=2*250k */
+ val = wm8990_read_reg_cache(codec, WM8990_POWER_MANAGEMENT_1) &
+ ~WM8990_VMID_MODE_MASK;
+ wm8990_write(codec, WM8990_POWER_MANAGEMENT_1, val | 0x4);
break;
case SND_SOC_BIAS_OFF:
.rates = WM8990_RATES,
.formats = WM8990_FORMATS,},
.ops = {
- .hw_params = wm8990_hw_params,},
- .dai_ops = {
+ .hw_params = wm8990_hw_params,
.digital_mute = wm8990_mute,
.set_fmt = wm8990_set_dai_fmt,
.set_clkdiv = wm8990_set_dai_clkdiv,
wm8990_add_controls(codec);
wm8990_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm8990: failed to register card\n");
goto card_err;
};
EXPORT_SYMBOL_GPL(soc_codec_dev_wm8990);
+static int __init wm8990_modinit(void)
+{
+ return snd_soc_register_dai(&wm8990_dai);
+}
+module_init(wm8990_modinit);
+
+static void __exit wm8990_exit(void)
+{
+ snd_soc_unregister_dai(&wm8990_dai);
+}
+module_exit(wm8990_exit);
+
MODULE_DESCRIPTION("ASoC WM8990 driver");
MODULE_AUTHOR("Liam Girdwood");
MODULE_LICENSE("GPL");
#define WM8990_PLL3 0x3E
#define WM8990_INTDRIVBITS 0x3F
-#define WM8990_REGISTER_COUNT 60
-#define WM8990_MAX_REGISTER 0x3F
+#define WM8990_EXT_ACCESS_ENA 0x75
+#define WM8990_EXT_CTL1 0x7a
/*
* Field Definitions.
return 0;
}
-static int ac97_prepare(struct snd_pcm_substream *substream)
+static int ac97_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
return ac97_write(codec, reg, runtime->rate);
}
-static int ac97_aux_prepare(struct snd_pcm_substream *substream)
+static int ac97_aux_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai wm9712_dai[] = {
{
.name = "AC97 HiFi",
- .type = SND_SOC_DAI_AC97_BUS,
+ .ac97_control = 1,
.playback = {
.stream_name = "HiFi Playback",
.channels_min = 1,
ret = wm9712_reset(codec, 0);
if (ret < 0) {
- printk(KERN_ERR "AC97 link error\n");
+ printk(KERN_ERR "Failed to reset WM9712: AC97 link error\n");
goto reset_err;
}
wm9712_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
wm9712_add_controls(codec);
wm9712_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "wm9712: failed to register card\n");
goto reset_err;
}
static int wm9713_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->codec;
+ struct snd_soc_codec *codec = dai->codec;
u16 reg = ac97_read(codec, AC97_CENTER_LFE_MASTER) & 0xfff3;
switch (params_format(params)) {
return 0;
}
-static void wm9713_voiceshutdown(struct snd_pcm_substream *substream)
+static void wm9713_voiceshutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->codec;
+ struct snd_soc_codec *codec = dai->codec;
u16 status;
/* Gracefully shut down the voice interface. */
ac97_write(codec, AC97_EXTENDED_MID, status);
}
-static int ac97_hifi_prepare(struct snd_pcm_substream *substream)
+static int ac97_hifi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
+ struct snd_soc_codec *codec = dai->codec;
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->codec;
int reg;
u16 vra;
return ac97_write(codec, reg, runtime->rate);
}
-static int ac97_aux_prepare(struct snd_pcm_substream *substream)
+static int ac97_aux_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
+ struct snd_soc_codec *codec = dai->codec;
struct snd_pcm_runtime *runtime = substream->runtime;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_device *socdev = rtd->socdev;
- struct snd_soc_codec *codec = socdev->codec;
u16 vra, xsle;
vra = ac97_read(codec, AC97_EXTENDED_STATUS);
struct snd_soc_dai wm9713_dai[] = {
{
.name = "AC97 HiFi",
- .type = SND_SOC_DAI_AC97_BUS,
+ .ac97_control = 1,
.playback = {
.stream_name = "HiFi Playback",
.channels_min = 1,
.rates = WM9713_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
- .prepare = ac97_hifi_prepare,},
- .dai_ops = {
+ .prepare = ac97_hifi_prepare,
.set_clkdiv = wm9713_set_dai_clkdiv,
.set_pll = wm9713_set_dai_pll,},
},
.rates = WM9713_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
- .prepare = ac97_aux_prepare,},
- .dai_ops = {
+ .prepare = ac97_aux_prepare,
.set_clkdiv = wm9713_set_dai_clkdiv,
.set_pll = wm9713_set_dai_pll,},
},
.formats = WM9713_PCM_FORMATS,},
.ops = {
.hw_params = wm9713_pcm_hw_params,
- .shutdown = wm9713_voiceshutdown,},
- .dai_ops = {
+ .shutdown = wm9713_voiceshutdown,
.set_clkdiv = wm9713_set_dai_clkdiv,
.set_pll = wm9713_set_dai_pll,
.set_fmt = wm9713_set_dai_fmt,
}
soc_ac97_ops.reset(codec->ac97);
+ if (soc_ac97_ops.warm_reset)
+ soc_ac97_ops.warm_reset(codec->ac97);
if (ac97_read(codec, 0) != wm9713_reg[0])
return -EIO;
return 0;
wm9713_reset(codec, 0);
ret = wm9713_reset(codec, 1);
if (ret < 0) {
- printk(KERN_ERR "AC97 link error\n");
+ printk(KERN_ERR "Failed to reset WM9713: AC97 link error\n");
goto reset_err;
}
wm9713_add_controls(codec);
wm9713_add_widgets(codec);
- ret = snd_soc_register_card(socdev);
+ ret = snd_soc_init_card(socdev);
if (ret < 0)
goto reset_err;
return 0;
snd_soc_free_ac97_codec(codec);
kfree(codec->private_data);
kfree(codec->reg_cache);
- kfree(codec->dai);
kfree(codec);
return 0;
}
help
Say Y if you want to add support for SoC audio on TI
DaVinci EVM platform.
+
+config SND_DAVINCI_SOC_SFFSDR
+ tristate "SoC Audio support for SFFSDR"
+ depends on SND_DAVINCI_SOC && MACH_DAVINCI_SFFSDR
+ select SND_DAVINCI_SOC_I2S
+ select SND_SOC_PCM3008
+ select SFFSDR_FPGA
+ help
+ Say Y if you want to add support for SoC audio on
+ Lyrtech SFFSDR board.
# DAVINCI Machine Support
snd-soc-evm-objs := davinci-evm.o
+snd-soc-sffsdr-objs := davinci-sffsdr.o
obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_DAVINCI_SOC_SFFSDR) += snd-soc-sffsdr.o
#define EVM_CODEC_CLOCK 22579200
+#define AUDIO_FORMAT (SND_SOC_DAIFMT_DSP_B | \
+ SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF)
static int evm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
int ret = 0;
/* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBM_CFM);
+ ret = snd_soc_dai_set_fmt(codec_dai, AUDIO_FORMAT);
if (ret < 0)
return ret;
/* set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
- SND_SOC_DAIFMT_IB_NF);
+ ret = snd_soc_dai_set_fmt(cpu_dai, AUDIO_FORMAT);
if (ret < 0)
return ret;
};
/* davinci-evm audio machine driver */
-static struct snd_soc_machine snd_soc_machine_evm = {
+static struct snd_soc_card snd_soc_card_evm = {
.name = "DaVinci EVM",
+ .platform = &davinci_soc_platform,
.dai_link = &evm_dai,
.num_links = 1,
};
/* evm audio subsystem */
static struct snd_soc_device evm_snd_devdata = {
- .machine = &snd_soc_machine_evm,
- .platform = &davinci_soc_platform,
+ .card = &snd_soc_card_evm,
.codec_dev = &soc_codec_dev_aic3x,
.codec_data = &evm_aic3x_setup,
};
#define DAVINCI_MCBSP_PCR_CLKXP (1 << 1)
#define DAVINCI_MCBSP_PCR_FSRP (1 << 2)
#define DAVINCI_MCBSP_PCR_FSXP (1 << 3)
+#define DAVINCI_MCBSP_PCR_SCLKME (1 << 7)
#define DAVINCI_MCBSP_PCR_CLKRM (1 << 8)
#define DAVINCI_MCBSP_PCR_CLKXM (1 << 9)
#define DAVINCI_MCBSP_PCR_FSRM (1 << 10)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct davinci_mcbsp_dev *dev = rtd->dai->cpu_dai->private_data;
+ struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_platform *platform = socdev->card->platform;
u32 w;
+ int ret;
/* Start the sample generator and enable transmitter/receiver */
w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_GRST, 1);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ /* Stop the DMA to avoid data loss */
+ /* while the transmitter is out of reset to handle XSYNCERR */
+ if (platform->pcm_ops->trigger) {
+ ret = platform->pcm_ops->trigger(substream,
+ SNDRV_PCM_TRIGGER_STOP);
+ if (ret < 0)
+ printk(KERN_DEBUG "Playback DMA stop failed\n");
+ }
+
+ /* Enable the transmitter */
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
- else
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+
+ /* wait for any unexpected frame sync error to occur */
+ udelay(100);
+
+ /* Disable the transmitter to clear any outstanding XSYNCERR */
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 0);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+
+ /* Restart the DMA */
+ if (platform->pcm_ops->trigger) {
+ ret = platform->pcm_ops->trigger(substream,
+ SNDRV_PCM_TRIGGER_START);
+ if (ret < 0)
+ printk(KERN_DEBUG "Playback DMA start failed\n");
+ }
+ /* Enable the transmitter */
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_XRST, 1);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+
+ } else {
+
+ /* Enable the reciever */
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
MOD_REG_BIT(w, DAVINCI_MCBSP_SPCR_RRST, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ }
+
/* Start frame sync */
w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
}
-static int davinci_i2s_startup(struct snd_pcm_substream *substream)
+static int davinci_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
return 0;
}
+#define DEFAULT_BITPERSAMPLE 16
+
static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
- u32 w;
+ unsigned int pcr;
+ unsigned int srgr;
+ unsigned int rcr;
+ unsigned int xcr;
+ srgr = DAVINCI_MCBSP_SRGR_FSGM |
+ DAVINCI_MCBSP_SRGR_FPER(DEFAULT_BITPERSAMPLE * 2 - 1) |
+ DAVINCI_MCBSP_SRGR_FWID(DEFAULT_BITPERSAMPLE - 1);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG,
- DAVINCI_MCBSP_PCR_FSXM |
- DAVINCI_MCBSP_PCR_FSRM |
- DAVINCI_MCBSP_PCR_CLKXM |
- DAVINCI_MCBSP_PCR_CLKRM);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG,
- DAVINCI_MCBSP_SRGR_FSGM);
+ /* cpu is master */
+ pcr = DAVINCI_MCBSP_PCR_FSXM |
+ DAVINCI_MCBSP_PCR_FSRM |
+ DAVINCI_MCBSP_PCR_CLKXM |
+ DAVINCI_MCBSP_PCR_CLKRM;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ /* McBSP CLKR pin is the input for the Sample Rate Generator.
+ * McBSP FSR and FSX are driven by the Sample Rate Generator. */
+ pcr = DAVINCI_MCBSP_PCR_SCLKME |
+ DAVINCI_MCBSP_PCR_FSXM |
+ DAVINCI_MCBSP_PCR_FSRM;
break;
case SND_SOC_DAIFMT_CBM_CFM:
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, 0);
+ /* codec is master */
+ pcr = 0;
break;
default:
+ printk(KERN_ERR "%s:bad master\n", __func__);
return -EINVAL;
}
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_IB_NF:
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_CLKXP |
- DAVINCI_MCBSP_PCR_CLKRP, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w);
+ rcr = DAVINCI_MCBSP_RCR_RFRLEN1(1);
+ xcr = DAVINCI_MCBSP_XCR_XFIG | DAVINCI_MCBSP_XCR_XFRLEN1(1);
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_DSP_B:
break;
- case SND_SOC_DAIFMT_NB_IF:
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_FSXP |
- DAVINCI_MCBSP_PCR_FSRP, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w);
+ case SND_SOC_DAIFMT_I2S:
+ /* Davinci doesn't support TRUE I2S, but some codecs will have
+ * the left and right channels contiguous. This allows
+ * dsp_a mode to be used with an inverted normal frame clk.
+ * If your codec is master and does not have contiguous
+ * channels, then you will have sound on only one channel.
+ * Try using a different mode, or codec as slave.
+ *
+ * The TLV320AIC33 is an example of a codec where this works.
+ * It has a variable bit clock frequency allowing it to have
+ * valid data on every bit clock.
+ *
+ * The TLV320AIC23 is an example of a codec where this does not
+ * work. It has a fixed bit clock frequency with progressively
+ * more empty bit clock slots between channels as the sample
+ * rate is lowered.
+ */
+ fmt ^= SND_SOC_DAIFMT_NB_IF;
+ case SND_SOC_DAIFMT_DSP_A:
+ rcr |= DAVINCI_MCBSP_RCR_RDATDLY(1);
+ xcr |= DAVINCI_MCBSP_XCR_XDATDLY(1);
+ break;
+ default:
+ printk(KERN_ERR "%s:bad format\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ /* CLKRP Receive clock polarity,
+ * 1 - sampled on rising edge of CLKR
+ * valid on rising edge
+ * CLKXP Transmit clock polarity,
+ * 1 - clocked on falling edge of CLKX
+ * valid on rising edge
+ * FSRP Receive frame sync pol, 0 - active high
+ * FSXP Transmit frame sync pol, 0 - active high
+ */
+ pcr |= (DAVINCI_MCBSP_PCR_CLKXP | DAVINCI_MCBSP_PCR_CLKRP);
break;
case SND_SOC_DAIFMT_IB_IF:
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_PCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_PCR_CLKXP |
- DAVINCI_MCBSP_PCR_CLKRP |
- DAVINCI_MCBSP_PCR_FSXP |
- DAVINCI_MCBSP_PCR_FSRP, 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, w);
+ /* CLKRP Receive clock polarity,
+ * 0 - sampled on falling edge of CLKR
+ * valid on falling edge
+ * CLKXP Transmit clock polarity,
+ * 0 - clocked on rising edge of CLKX
+ * valid on falling edge
+ * FSRP Receive frame sync pol, 1 - active low
+ * FSXP Transmit frame sync pol, 1 - active low
+ */
+ pcr |= (DAVINCI_MCBSP_PCR_FSXP | DAVINCI_MCBSP_PCR_FSRP);
break;
- case SND_SOC_DAIFMT_NB_NF:
+ case SND_SOC_DAIFMT_NB_IF:
+ /* CLKRP Receive clock polarity,
+ * 1 - sampled on rising edge of CLKR
+ * valid on rising edge
+ * CLKXP Transmit clock polarity,
+ * 1 - clocked on falling edge of CLKX
+ * valid on rising edge
+ * FSRP Receive frame sync pol, 1 - active low
+ * FSXP Transmit frame sync pol, 1 - active low
+ */
+ pcr |= (DAVINCI_MCBSP_PCR_CLKXP | DAVINCI_MCBSP_PCR_CLKRP |
+ DAVINCI_MCBSP_PCR_FSXP | DAVINCI_MCBSP_PCR_FSRP);
+ break;
+ case SND_SOC_DAIFMT_IB_NF:
+ /* CLKRP Receive clock polarity,
+ * 0 - sampled on falling edge of CLKR
+ * valid on falling edge
+ * CLKXP Transmit clock polarity,
+ * 0 - clocked on rising edge of CLKX
+ * valid on falling edge
+ * FSRP Receive frame sync pol, 0 - active high
+ * FSXP Transmit frame sync pol, 0 - active high
+ */
break;
default:
return -EINVAL;
}
-
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, srgr);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_PCR_REG, pcr);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, rcr);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, xcr);
return 0;
}
static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct davinci_pcm_dma_params *dma_params = rtd->dai->cpu_dai->dma_data;
u32 w;
/* general line settings */
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG,
- DAVINCI_MCBSP_SPCR_RINTM(3) |
- DAVINCI_MCBSP_SPCR_XINTM(3) |
- DAVINCI_MCBSP_SPCR_FREE);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG,
- DAVINCI_MCBSP_RCR_RFRLEN1(1) |
- DAVINCI_MCBSP_RCR_RDATDLY(1));
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG,
- DAVINCI_MCBSP_XCR_XFRLEN1(1) |
- DAVINCI_MCBSP_XCR_XDATDLY(1) |
- DAVINCI_MCBSP_XCR_XFIG);
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ w |= DAVINCI_MCBSP_SPCR_RINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ } else {
+ w |= DAVINCI_MCBSP_SPCR_XINTM(3) | DAVINCI_MCBSP_SPCR_FREE;
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SPCR_REG, w);
+ }
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_SAMPLE_BITS);
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SRGR_REG);
+ w = DAVINCI_MCBSP_SRGR_FSGM;
MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FWID(snd_interval_value(i) - 1), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w);
i = hw_param_interval(params, SNDRV_PCM_HW_PARAM_FRAME_BITS);
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SRGR_REG);
MOD_REG_BIT(w, DAVINCI_MCBSP_SRGR_FPER(snd_interval_value(i) - 1), 1);
davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_SRGR_REG, w);
return -EINVAL;
}
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_RCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, w);
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_RCR_REG);
+ MOD_REG_BIT(w, DAVINCI_MCBSP_RCR_RWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_RCR_RWDLEN2(mcbsp_word_length), 1);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_RCR_REG, w);
- w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_XCR_REG);
- MOD_REG_BIT(w, DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
- DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length), 1);
- davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, w);
+ } else {
+ w = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_XCR_REG);
+ MOD_REG_BIT(w, DAVINCI_MCBSP_XCR_XWDLEN1(mcbsp_word_length) |
+ DAVINCI_MCBSP_XCR_XWDLEN2(mcbsp_word_length), 1);
+ davinci_mcbsp_write_reg(dev, DAVINCI_MCBSP_XCR_REG, w);
+ }
return 0;
}
-static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
int ret = 0;
struct snd_soc_dai *dai)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *ioarea;
struct evm_snd_platform_data *pdata;
struct snd_soc_dai *dai)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_dai *cpu_dai = machine->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
struct resource *mem;
struct snd_soc_dai davinci_i2s_dai = {
.name = "davinci-i2s",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.probe = davinci_i2s_probe,
.remove = davinci_i2s_remove,
.playback = {
.ops = {
.startup = davinci_i2s_startup,
.trigger = davinci_i2s_trigger,
- .hw_params = davinci_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = davinci_i2s_hw_params,
.set_fmt = davinci_i2s_set_dai_fmt,
},
};
EXPORT_SYMBOL_GPL(davinci_i2s_dai);
+static int __init davinci_i2s_init(void)
+{
+ return snd_soc_register_dai(&davinci_i2s_dai);
+}
+module_init(davinci_i2s_init);
+
+static void __exit davinci_i2s_exit(void)
+{
+ snd_soc_unregister_dai(&davinci_i2s_dai);
+}
+module_exit(davinci_i2s_exit);
+
MODULE_AUTHOR("Vladimir Barinov");
MODULE_DESCRIPTION("TI DAVINCI I2S (McBSP) SoC Interface");
MODULE_LICENSE("GPL");
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "davinci-pcm.h"
-#define DAVINCI_PCM_DEBUG 0
-#if DAVINCI_PCM_DEBUG
-#define DPRINTK(x...) printk(KERN_DEBUG x)
-#else
-#define DPRINTK(x...)
-#endif
-
static struct snd_pcm_hardware davinci_pcm_hardware = {
.info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
dma_offset = prtd->period * period_size;
dma_pos = runtime->dma_addr + dma_offset;
- DPRINTK("audio_set_dma_params_play channel = %d dma_ptr = %x "
- "period_size=%x\n", lch, dma_pos, period_size);
+ pr_debug("davinci_pcm: audio_set_dma_params_play channel = %d "
+ "dma_ptr = %x period_size=%x\n", lch, dma_pos, period_size);
data_type = prtd->params->data_type;
count = period_size / data_type;
struct snd_pcm_substream *substream = data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
- DPRINTK("lch=%d, status=0x%x\n", lch, ch_status);
+ pr_debug("davinci_pcm: lch=%d, status=0x%x\n", lch, ch_status);
if (unlikely(ch_status != DMA_COMPLETE))
return;
buf->area = dma_alloc_writecombine(pcm->card->dev, size,
&buf->addr, GFP_KERNEL);
- DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
- (void *) buf->area, (void *) buf->addr, size);
+ pr_debug("davinci_pcm: preallocate_dma_buffer: area=%p, addr=%p, "
+ "size=%d\n", (void *) buf->area, (void *) buf->addr, size);
if (!buf->area)
return -ENOMEM;
};
EXPORT_SYMBOL_GPL(davinci_soc_platform);
+static int __init davinci_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&davinci_soc_platform);
+}
+module_init(davinci_soc_platform_init);
+
+static void __exit davinci_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&davinci_soc_platform);
+}
+module_exit(davinci_soc_platform_exit);
+
MODULE_AUTHOR("Vladimir Barinov");
MODULE_DESCRIPTION("TI DAVINCI PCM DMA module");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ASoC driver for Lyrtech SFFSDR board.
+ *
+ * Author: Hugo Villeneuve
+ * Copyright (C) 2008 Lyrtech inc
+ *
+ * Based on ASoC driver for TI DAVINCI EVM platform, original copyright follow:
+ * Copyright: (C) 2007 MontaVista Software, Inc., <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/dma.h>
+#include <asm/plat-sffsdr/sffsdr-fpga.h>
+
+#include <mach/mcbsp.h>
+#include <mach/edma.h>
+
+#include "../codecs/pcm3008.h"
+#include "davinci-pcm.h"
+#include "davinci-i2s.h"
+
+static int sffsdr_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int fs;
+ int ret = 0;
+
+ /* Set cpu DAI configuration:
+ * CLKX and CLKR are the inputs for the Sample Rate Generator.
+ * FSX and FSR are outputs, driven by the sample Rate Generator. */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_RIGHT_J |
+ SND_SOC_DAIFMT_CBM_CFS |
+ SND_SOC_DAIFMT_IB_NF);
+ if (ret < 0)
+ return ret;
+
+ /* Fsref can be 32000, 44100 or 48000. */
+ fs = params_rate(params);
+
+ pr_debug("sffsdr_hw_params: rate = %d Hz\n", fs);
+
+ return sffsdr_fpga_set_codec_fs(fs);
+}
+
+static struct snd_soc_ops sffsdr_ops = {
+ .hw_params = sffsdr_hw_params,
+};
+
+/* davinci-sffsdr digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link sffsdr_dai = {
+ .name = "PCM3008", /* Codec name */
+ .stream_name = "PCM3008 HiFi",
+ .cpu_dai = &davinci_i2s_dai,
+ .codec_dai = &pcm3008_dai,
+ .ops = &sffsdr_ops,
+};
+
+/* davinci-sffsdr audio machine driver */
+static struct snd_soc_card snd_soc_sffsdr = {
+ .name = "DaVinci SFFSDR",
+ .platform = &davinci_soc_platform,
+ .dai_link = &sffsdr_dai,
+ .num_links = 1,
+};
+
+/* sffsdr audio private data */
+static struct pcm3008_setup_data sffsdr_pcm3008_setup = {
+ .dem0_pin = GPIO(45),
+ .dem1_pin = GPIO(46),
+ .pdad_pin = GPIO(47),
+ .pdda_pin = GPIO(38),
+};
+
+/* sffsdr audio subsystem */
+static struct snd_soc_device sffsdr_snd_devdata = {
+ .card = &snd_soc_sffsdr,
+ .codec_dev = &soc_codec_dev_pcm3008,
+ .codec_data = &sffsdr_pcm3008_setup,
+};
+
+static struct resource sffsdr_snd_resources[] = {
+ {
+ .start = DAVINCI_MCBSP_BASE,
+ .end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct evm_snd_platform_data sffsdr_snd_data = {
+ .tx_dma_ch = DAVINCI_DMA_MCBSP_TX,
+ .rx_dma_ch = DAVINCI_DMA_MCBSP_RX,
+};
+
+static struct platform_device *sffsdr_snd_device;
+
+static int __init sffsdr_init(void)
+{
+ int ret;
+
+ sffsdr_snd_device = platform_device_alloc("soc-audio", 0);
+ if (!sffsdr_snd_device) {
+ printk(KERN_ERR "platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(sffsdr_snd_device, &sffsdr_snd_devdata);
+ sffsdr_snd_devdata.dev = &sffsdr_snd_device->dev;
+ sffsdr_snd_device->dev.platform_data = &sffsdr_snd_data;
+
+ ret = platform_device_add_resources(sffsdr_snd_device,
+ sffsdr_snd_resources,
+ ARRAY_SIZE(sffsdr_snd_resources));
+ if (ret) {
+ printk(KERN_ERR "platform device add ressources failed\n");
+ goto error;
+ }
+
+ ret = platform_device_add(sffsdr_snd_device);
+ if (ret)
+ goto error;
+
+ return ret;
+
+error:
+ platform_device_put(sffsdr_snd_device);
+ return ret;
+}
+
+static void __exit sffsdr_exit(void)
+{
+ platform_device_unregister(sffsdr_snd_device);
+}
+
+module_init(sffsdr_init);
+module_exit(sffsdr_exit);
+
+MODULE_AUTHOR("Hugo Villeneuve");
+MODULE_DESCRIPTION("Lyrtech SFFSDR ASoC driver");
+MODULE_LICENSE("GPL");
config SND_SOC_MPC5200_I2S
tristate "Freescale MPC5200 PSC in I2S mode driver"
+ depends on PPC_MPC52xx && PPC_BESTCOMM
select SND_SOC_OF_SIMPLE
- depends on SND_SOC && PPC_MPC52xx
+ select PPC_BESTCOMM_GEN_BD
help
Say Y here to support the MPC5200 PSCs in I2S mode.
* fsl_dma_new: initialize this PCM driver.
*
* This function is called when the codec driver calls snd_soc_new_pcms(),
- * once for each .dai_link in the machine driver's snd_soc_machine
+ * once for each .dai_link in the machine driver's snd_soc_card
* structure.
*/
static int fsl_dma_new(struct snd_card *card, struct snd_soc_dai *dai,
}
EXPORT_SYMBOL_GPL(fsl_dma_configure);
+static int __init fsl_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&fsl_soc_platform);
+}
+module_init(fsl_soc_platform_init);
+
+static void __exit fsl_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&fsl_soc_platform);
+}
+module_exit(fsl_soc_platform_exit);
+
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_DESCRIPTION("Freescale Elo DMA ASoC PCM module");
MODULE_LICENSE("GPL");
* If this is the first stream open, then grab the IRQ and program most of
* the SSI registers.
*/
-static int fsl_ssi_startup(struct snd_pcm_substream *substream)
+static int fsl_ssi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
* Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the
* clock master.
*/
-static int fsl_ssi_prepare(struct snd_pcm_substream *substream)
+static int fsl_ssi_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
* The DMA channel is in external master start and pause mode, which
* means the SSI completely controls the flow of data.
*/
-static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd)
+static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
*
* Shutdown the SSI if there are no other substreams open.
*/
-static void fsl_ssi_shutdown(struct snd_pcm_substream *substream)
+static void fsl_ssi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
.prepare = fsl_ssi_prepare,
.shutdown = fsl_ssi_shutdown,
.trigger = fsl_ssi_trigger,
- },
- .dai_ops = {
.set_sysclk = fsl_ssi_set_sysclk,
.set_fmt = fsl_ssi_set_fmt,
},
fsl_ssi_dai->private_data = ssi_private;
fsl_ssi_dai->name = ssi_private->name;
fsl_ssi_dai->id = ssi_info->id;
+ fsl_ssi_dai->dev = ssi_info->dev;
+
+ ret = snd_soc_register_dai(fsl_ssi_dai);
+ if (ret != 0) {
+ dev_err(ssi_info->dev, "failed to register DAI: %d\n", ret);
+ kfree(fsl_ssi_dai);
+ return NULL;
+ }
return fsl_ssi_dai;
}
device_remove_file(ssi_private->dev, &ssi_private->dev_attr);
+ snd_soc_unregister_dai(&ssi_private->cpu_dai);
+
kfree(ssi_private);
}
EXPORT_SYMBOL_GPL(fsl_ssi_destroy_dai);
* If this is the first stream open, then grab the IRQ and program most of
* the PSC registers.
*/
-static int psc_i2s_startup(struct snd_pcm_substream *substream)
+static int psc_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
}
static int psc_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
return 0;
}
-static int psc_i2s_hw_free(struct snd_pcm_substream *substream)
+static int psc_i2s_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
snd_pcm_set_runtime_buffer(substream, NULL);
return 0;
* This function is called by ALSA to start, stop, pause, and resume the DMA
* transfer of data.
*/
-static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int psc_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
*
* Shutdown the PSC if there are no other substreams open.
*/
-static void psc_i2s_shutdown(struct snd_pcm_substream *substream)
+static void psc_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct psc_i2s *psc_i2s = rtd->dai->cpu_dai->private_data;
* psc_i2s_dai_template: template CPU Digital Audio Interface
*/
static struct snd_soc_dai psc_i2s_dai_template = {
- .type = SND_SOC_DAI_I2S,
.playback = {
.channels_min = 2,
.channels_max = 2,
.hw_free = psc_i2s_hw_free,
.shutdown = psc_i2s_shutdown,
.trigger = psc_i2s_trigger,
- },
- .dai_ops = {
.set_sysclk = psc_i2s_set_sysclk,
.set_fmt = psc_i2s_set_fmt,
},
if (rc)
dev_info(psc_i2s->dev, "error creating sysfs files\n");
+ snd_soc_register_platform(&psc_i2s_pcm_soc_platform);
+
/* Tell the ASoC OF helpers about it */
of_snd_soc_register_platform(&psc_i2s_pcm_soc_platform, op->node,
&psc_i2s->dai);
dev_dbg(&op->dev, "psc_i2s_remove()\n");
+ snd_soc_unregister_platform(&psc_i2s_pcm_soc_platform);
+
bcom_gen_bd_rx_release(psc_i2s->capture.bcom_task);
bcom_gen_bd_tx_release(psc_i2s->playback.bcom_task);
struct mpc8610_hpcd_data {
struct snd_soc_device sound_devdata;
struct snd_soc_dai_link dai;
- struct snd_soc_machine machine;
+ struct snd_soc_card machine;
unsigned int dai_format;
unsigned int codec_clk_direction;
unsigned int cpu_clk_direction;
/**
* mpc8610_hpcd_machine: ASoC machine data
*/
-static struct snd_soc_machine mpc8610_hpcd_machine = {
+static struct snd_soc_card mpc8610_hpcd_machine = {
.probe = mpc8610_hpcd_machine_probe,
.remove = mpc8610_hpcd_machine_remove,
.name = "MPC8610 HPCD",
goto error;
}
- machine_data->sound_devdata.machine = &mpc8610_hpcd_machine;
+ machine_data->sound_devdata.card = &mpc8610_hpcd_machine;
machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270;
- machine_data->sound_devdata.platform = &fsl_soc_platform;
+ machine_data->machine.platform = &fsl_soc_platform;
sound_device->dev.platform_data = machine_data;
int id;
struct list_head list;
struct snd_soc_device device;
- struct snd_soc_machine machine;
+ struct snd_soc_card card;
struct snd_soc_dai_link dai_link;
struct platform_device *pdev;
struct device_node *platform_node;
/* Initialize the structure and add it to the global list */
of_soc->codec_node = codec_node;
of_soc->id = of_snd_soc_next_index++;
- of_soc->machine.dai_link = &of_soc->dai_link;
- of_soc->machine.num_links = 1;
- of_soc->device.machine = &of_soc->machine;
+ of_soc->card.dai_link = &of_soc->dai_link;
+ of_soc->card.num_links = 1;
+ of_soc->device.card = &of_soc->card;
of_soc->dai_link.ops = &of_snd_soc_ops;
list_add(&of_soc->list, &of_snd_soc_device_list);
of_soc->platform_node = node;
of_soc->dai_link.cpu_dai = cpu_dai;
- of_soc->device.platform = platform;
- of_soc->machine.name = of_soc->dai_link.cpu_dai->name;
+ of_soc->card.platform = platform;
+ of_soc->card.name = of_soc->dai_link.cpu_dai->name;
/* Now try to register the SoC device */
of_snd_soc_register_device(of_soc);
config SND_OMAP_SOC
tristate "SoC Audio for the Texas Instruments OMAP chips"
- depends on ARCH_OMAP && SND_SOC
+ depends on ARCH_OMAP
config SND_OMAP_SOC_MCBSP
tristate
select SND_SOC_TLV320AIC23
help
Say Y if you want to add support for SoC audio on osk5912.
+
+config SND_OMAP_SOC_OVERO
+ tristate "SoC Audio support for Gumstix Overo"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OVERO
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on the Gumstix Overo.
+
+config SND_OMAP_SOC_OMAP2EVM
+ tristate "SoC Audio support for OMAP2EVM board"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP2EVM
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on the omap2evm board.
+
+config SND_OMAP_SOC_SDP3430
+ tristate "SoC Audio support for Texas Instruments SDP3430"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on Texas Instruments
+ SDP3430.
+
+config SND_OMAP_SOC_OMAP3_PANDORA
+ tristate "SoC Audio support for OMAP3 Pandora"
+ depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
+ select SND_OMAP_SOC_MCBSP
+ select SND_SOC_TWL4030
+ help
+ Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
# OMAP Machine Support
snd-soc-n810-objs := n810.o
snd-soc-osk5912-objs := osk5912.o
+snd-soc-overo-objs := overo.o
+snd-soc-omap2evm-objs := omap2evm.o
+snd-soc-sdp3430-objs := sdp3430.o
+snd-soc-omap3pandora-objs := omap3pandora.o
obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o
obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o
+obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o
+obj-$(CONFIG_MACH_OMAP2EVM) += snd-soc-omap2evm.o
+obj-$(CONFIG_SND_OMAP_SOC_SDP3430) += snd-soc-sdp3430.o
+obj-$(CONFIG_SND_OMAP_SOC_OMAP3_PANDORA) += snd-soc-omap3pandora.o
static int n810_startup(struct snd_pcm_substream *substream)
{
+ struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->socdev->codec;
+ snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2);
+
n810_ext_control(codec);
return clk_enable(sys_clkout2);
}
};
/* Audio machine driver */
-static struct snd_soc_machine snd_soc_machine_n810 = {
+static struct snd_soc_card snd_soc_n810 = {
.name = "N810",
+ .platform = &omap_soc_platform,
.dai_link = &n810_dai,
.num_links = 1,
};
/* Audio subsystem */
static struct snd_soc_device n810_snd_devdata = {
- .machine = &snd_soc_machine_n810,
- .platform = &omap_soc_platform,
+ .card = &snd_soc_n810,
.codec_dev = &soc_codec_dev_aic3x,
.codec_data = &n810_aic33_setup,
};
#include "omap-mcbsp.h"
#include "omap-pcm.h"
-#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | \
- SNDRV_PCM_RATE_KNOT)
+#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)
struct omap_mcbsp_data {
unsigned int bus_id;
static const unsigned long omap34xx_mcbsp_port[][2] = {};
#endif
-static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream)
+static int omap_mcbsp_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
return err;
}
-static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream)
+static void omap_mcbsp_dai_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
}
-static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+static int omap_mcbsp_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
int dma, bus_id = mcbsp_data->bus_id, id = cpu_dai->id;
- int wlen;
+ int wlen, channels;
unsigned long port;
if (cpu_class_is_omap1()) {
return 0;
}
- switch (params_channels(params)) {
+ channels = params_channels(params);
+ switch (channels) {
case 2:
- /* Set 1 word per (McBPSP) frame and use dual-phase frames */
- regs->rcr2 |= RFRLEN2(1 - 1) | RPHASE;
+ /* Use dual-phase frames */
+ regs->rcr2 |= RPHASE;
+ regs->xcr2 |= XPHASE;
+ case 1:
+ /* Set 1 word per (McBSP) frame */
+ regs->rcr2 |= RFRLEN2(1 - 1);
regs->rcr1 |= RFRLEN1(1 - 1);
- regs->xcr2 |= XFRLEN2(1 - 1) | XPHASE;
+ regs->xcr2 |= XFRLEN2(1 - 1);
regs->xcr1 |= XFRLEN1(1 - 1);
break;
default:
regs->srgr2 |= FPER(wlen * 2 - 1);
regs->srgr1 |= FWID(wlen - 1);
break;
- case SND_SOC_DAIFMT_DSP_A:
- regs->srgr2 |= FPER(wlen * 2 - 1);
- regs->srgr1 |= FWID(wlen * 2 - 2);
+ case SND_SOC_DAIFMT_DSP_B:
+ regs->srgr2 |= FPER(wlen * channels - 1);
+ regs->srgr1 |= FWID(wlen * channels - 2);
break;
}
regs->rcr2 |= RDATDLY(1);
regs->xcr2 |= XDATDLY(1);
break;
- case SND_SOC_DAIFMT_DSP_A:
+ case SND_SOC_DAIFMT_DSP_B:
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
#define OMAP_MCBSP_DAI_BUILDER(link_id) \
{ \
- .name = "omap-mcbsp-dai-(link_id)", \
+ .name = "omap-mcbsp-dai-"#link_id, \
.id = (link_id), \
- .type = SND_SOC_DAI_I2S, \
.playback = { \
- .channels_min = 2, \
+ .channels_min = 1, \
.channels_max = 2, \
.rates = OMAP_MCBSP_RATES, \
.formats = SNDRV_PCM_FMTBIT_S16_LE, \
}, \
.capture = { \
- .channels_min = 2, \
+ .channels_min = 1, \
.channels_max = 2, \
.rates = OMAP_MCBSP_RATES, \
.formats = SNDRV_PCM_FMTBIT_S16_LE, \
.shutdown = omap_mcbsp_dai_shutdown, \
.trigger = omap_mcbsp_dai_trigger, \
.hw_params = omap_mcbsp_dai_hw_params, \
- }, \
- .dai_ops = { \
.set_fmt = omap_mcbsp_dai_set_dai_fmt, \
.set_clkdiv = omap_mcbsp_dai_set_clkdiv, \
.set_sysclk = omap_mcbsp_dai_set_dai_sysclk, \
EXPORT_SYMBOL_GPL(omap_mcbsp_dai);
+static int __init snd_omap_mcbsp_init(void)
+{
+ return snd_soc_register_dais(omap_mcbsp_dai,
+ ARRAY_SIZE(omap_mcbsp_dai));
+}
+module_init(snd_omap_mcbsp_init);
+
+static void __exit snd_omap_mcbsp_exit(void)
+{
+ snd_soc_unregister_dais(omap_mcbsp_dai, ARRAY_SIZE(omap_mcbsp_dai));
+}
+module_exit(snd_omap_mcbsp_exit);
+
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
prtd->dma_data = dma_data;
err = omap_request_dma(dma_data->dma_req, dma_data->name,
omap_pcm_dma_irq, substream, &prtd->dma_ch);
- if (!err & !cpu_is_omap1510()) {
+ if (!err && !cpu_is_omap1510()) {
/*
* Link channel with itself so DMA doesn't need any
* reprogramming while looping the buffer
if (ret < 0)
goto out;
- prtd = kzalloc(sizeof(prtd), GFP_KERNEL);
+ prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
if (prtd == NULL) {
ret = -ENOMEM;
goto out;
};
EXPORT_SYMBOL_GPL(omap_soc_platform);
+static int __init omap_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&omap_soc_platform);
+}
+module_init(omap_soc_platform_init);
+
+static void __exit omap_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&omap_soc_platform);
+}
+module_exit(omap_soc_platform_exit);
+
MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * omap2evm.c -- SoC audio machine driver for omap2evm board
+ *
+ * Author: Arun KS <arunks@mistralsolutions.com>
+ *
+ * Based on sound/soc/omap/overo.c by Steve Sakoman
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap2evm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops omap2evm_ops = {
+ .hw_params = omap2evm_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap2evm_dai = {
+ .name = "TWL4030",
+ .stream_name = "TWL4030",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai,
+ .ops = &omap2evm_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap2evm = {
+ .name = "omap2evm",
+ .platform = &omap_soc_platform,
+ .dai_link = &omap2evm_dai,
+ .num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap2evm_snd_devdata = {
+ .card = &snd_soc_omap2evm,
+ .codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap2evm_snd_device;
+
+static int __init omap2evm_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap2evm()) {
+ pr_debug("Not omap2evm!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "omap2evm SoC init\n");
+
+ omap2evm_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!omap2evm_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(omap2evm_snd_device, &omap2evm_snd_devdata);
+ omap2evm_snd_devdata.dev = &omap2evm_snd_device->dev;
+ *(unsigned int *)omap2evm_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+ ret = platform_device_add(omap2evm_snd_device);
+ if (ret)
+ goto err1;
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(omap2evm_snd_device);
+
+ return ret;
+}
+module_init(omap2evm_soc_init);
+
+static void __exit omap2evm_soc_exit(void)
+{
+ platform_device_unregister(omap2evm_snd_device);
+}
+module_exit(omap2evm_soc_exit);
+
+MODULE_AUTHOR("Arun KS <arunks@mistralsolutions.com>");
+MODULE_DESCRIPTION("ALSA SoC omap2evm");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * omap3beagle.c -- SoC audio for OMAP3 Beagle
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int omap3beagle_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops omap3beagle_ops = {
+ .hw_params = omap3beagle_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3beagle_dai = {
+ .name = "TWL4030",
+ .stream_name = "TWL4030",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai,
+ .ops = &omap3beagle_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_omap3beagle = {
+ .name = "omap3beagle",
+ .platform = &omap_soc_platform,
+ .dai_link = &omap3beagle_dai,
+ .num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3beagle_snd_devdata = {
+ .card = &snd_soc_omap3beagle,
+ .codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3beagle_snd_device;
+
+static int __init omap3beagle_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap3_beagle()) {
+ pr_debug("Not OMAP3 Beagle!\n");
+ return -ENODEV;
+ }
+ pr_info("OMAP3 Beagle SoC init\n");
+
+ omap3beagle_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!omap3beagle_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(omap3beagle_snd_device, &omap3beagle_snd_devdata);
+ omap3beagle_snd_devdata.dev = &omap3beagle_snd_device->dev;
+ *(unsigned int *)omap3beagle_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+ ret = platform_device_add(omap3beagle_snd_device);
+ if (ret)
+ goto err1;
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(omap3beagle_snd_device);
+
+ return ret;
+}
+
+static void __exit omap3beagle_soc_exit(void)
+{
+ platform_device_unregister(omap3beagle_snd_device);
+}
+
+module_init(omap3beagle_soc_init);
+module_exit(omap3beagle_soc_exit);
+
+MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 Beagle");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * omap3pandora.c -- SoC audio for Pandora Handheld Console
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+#define OMAP3_PANDORA_DAC_POWER_GPIO 118
+#define OMAP3_PANDORA_AMP_POWER_GPIO 14
+
+#define PREFIX "ASoC omap3pandora: "
+
+static int omap3pandora_cmn_hw_params(struct snd_soc_dai *codec_dai,
+ struct snd_soc_dai *cpu_dai, unsigned int fmt)
+{
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai, fmt);
+ if (ret < 0) {
+ pr_err(PREFIX "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai, fmt);
+ if (ret < 0) {
+ pr_err(PREFIX "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ pr_err(PREFIX "can't set codec system clock\n");
+ return ret;
+ }
+
+ /* Set McBSP clock to external */
+ ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_SYSCLK_CLKS_EXT, 0,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ pr_err(PREFIX "can't set cpu system clock\n");
+ return ret;
+ }
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, OMAP_MCBSP_CLKGDV, 8);
+ if (ret < 0) {
+ pr_err(PREFIX "can't set SRG clock divider\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int omap3pandora_out_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ return omap3pandora_cmn_hw_params(codec_dai, cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+}
+
+static int omap3pandora_in_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+ return omap3pandora_cmn_hw_params(codec_dai, cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS);
+}
+
+static int omap3pandora_hp_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 1);
+ gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 1);
+ } else {
+ gpio_set_value(OMAP3_PANDORA_AMP_POWER_GPIO, 0);
+ mdelay(1);
+ gpio_set_value(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
+ }
+
+ return 0;
+}
+
+/*
+ * Audio paths on Pandora board:
+ *
+ * |O| ---> PCM DAC +-> AMP -> Headphone Jack
+ * |M| A +--------> Line Out
+ * |A| <~~clk~~+
+ * |P| <--- TWL4030 <--------- Line In and MICs
+ */
+static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("PCM DAC", "Playback", SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM,
+ 0, 0, NULL, 0, omap3pandora_hp_event,
+ SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_LINE("Line Out", NULL),
+};
+
+static const struct snd_soc_dapm_widget omap3pandora_in_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Mic (Internal)", NULL),
+ SND_SOC_DAPM_MIC("Mic (external)", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+};
+
+static const struct snd_soc_dapm_route omap3pandora_out_map[] = {
+ {"Headphone Amplifier", NULL, "PCM DAC"},
+ {"Line Out", NULL, "PCM DAC"},
+ {"Headphone Jack", NULL, "Headphone Amplifier"},
+};
+
+static const struct snd_soc_dapm_route omap3pandora_in_map[] = {
+ {"INL", NULL, "Line In"},
+ {"INR", NULL, "Line In"},
+ {"INL", NULL, "Mic (Internal)"},
+ {"INR", NULL, "Mic (external)"},
+};
+
+static int omap3pandora_out_init(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets,
+ ARRAY_SIZE(omap3pandora_out_dapm_widgets));
+ if (ret < 0)
+ return ret;
+
+ snd_soc_dapm_add_routes(codec, omap3pandora_out_map,
+ ARRAY_SIZE(omap3pandora_out_map));
+
+ return snd_soc_dapm_sync(codec);
+}
+
+static int omap3pandora_in_init(struct snd_soc_codec *codec)
+{
+ int ret;
+
+ ret = snd_soc_dapm_new_controls(codec, omap3pandora_in_dapm_widgets,
+ ARRAY_SIZE(omap3pandora_in_dapm_widgets));
+ if (ret < 0)
+ return ret;
+
+ snd_soc_dapm_add_routes(codec, omap3pandora_in_map,
+ ARRAY_SIZE(omap3pandora_in_map));
+
+ return snd_soc_dapm_sync(codec);
+}
+
+static struct snd_soc_ops omap3pandora_out_ops = {
+ .hw_params = omap3pandora_out_hw_params,
+};
+
+static struct snd_soc_ops omap3pandora_in_ops = {
+ .hw_params = omap3pandora_in_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link omap3pandora_dai[] = {
+ {
+ .name = "PCM1773",
+ .stream_name = "HiFi Out",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai,
+ .ops = &omap3pandora_out_ops,
+ .init = omap3pandora_out_init,
+ }, {
+ .name = "TWL4030",
+ .stream_name = "Line/Mic In",
+ .cpu_dai = &omap_mcbsp_dai[1],
+ .codec_dai = &twl4030_dai,
+ .ops = &omap3pandora_in_ops,
+ .init = omap3pandora_in_init,
+ }
+};
+
+/* SoC card */
+static struct snd_soc_card snd_soc_card_omap3pandora = {
+ .name = "omap3pandora",
+ .platform = &omap_soc_platform,
+ .dai_link = omap3pandora_dai,
+ .num_links = ARRAY_SIZE(omap3pandora_dai),
+};
+
+/* Audio subsystem */
+static struct snd_soc_device omap3pandora_snd_data = {
+ .card = &snd_soc_card_omap3pandora,
+ .codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *omap3pandora_snd_device;
+
+static int __init omap3pandora_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap3_pandora()) {
+ pr_debug(PREFIX "Not OMAP3 Pandora\n");
+ return -ENODEV;
+ }
+ pr_info("OMAP3 Pandora SoC init\n");
+
+ ret = gpio_request(OMAP3_PANDORA_DAC_POWER_GPIO, "dac_power");
+ if (ret) {
+ pr_err(PREFIX "Failed to get DAC power GPIO\n");
+ return ret;
+ }
+
+ ret = gpio_direction_output(OMAP3_PANDORA_DAC_POWER_GPIO, 0);
+ if (ret) {
+ pr_err(PREFIX "Failed to set DAC power GPIO direction\n");
+ goto fail0;
+ }
+
+ ret = gpio_request(OMAP3_PANDORA_AMP_POWER_GPIO, "amp_power");
+ if (ret) {
+ pr_err(PREFIX "Failed to get amp power GPIO\n");
+ goto fail0;
+ }
+
+ ret = gpio_direction_output(OMAP3_PANDORA_AMP_POWER_GPIO, 0);
+ if (ret) {
+ pr_err(PREFIX "Failed to set amp power GPIO direction\n");
+ goto fail1;
+ }
+
+ omap3pandora_snd_device = platform_device_alloc("soc-audio", -1);
+ if (omap3pandora_snd_device == NULL) {
+ pr_err(PREFIX "Platform device allocation failed\n");
+ ret = -ENOMEM;
+ goto fail1;
+ }
+
+ platform_set_drvdata(omap3pandora_snd_device, &omap3pandora_snd_data);
+ omap3pandora_snd_data.dev = &omap3pandora_snd_device->dev;
+ *(unsigned int *)omap_mcbsp_dai[0].private_data = 1; /* McBSP2 */
+ *(unsigned int *)omap_mcbsp_dai[1].private_data = 3; /* McBSP4 */
+
+ ret = platform_device_add(omap3pandora_snd_device);
+ if (ret) {
+ pr_err(PREFIX "Unable to add platform device\n");
+ goto fail2;
+ }
+
+ return 0;
+
+fail2:
+ platform_device_put(omap3pandora_snd_device);
+fail1:
+ gpio_free(OMAP3_PANDORA_AMP_POWER_GPIO);
+fail0:
+ gpio_free(OMAP3_PANDORA_DAC_POWER_GPIO);
+ return ret;
+}
+module_init(omap3pandora_soc_init);
+
+static void __exit omap3pandora_soc_exit(void)
+{
+ platform_device_unregister(omap3pandora_snd_device);
+ gpio_free(OMAP3_PANDORA_AMP_POWER_GPIO);
+ gpio_free(OMAP3_PANDORA_DAC_POWER_GPIO);
+}
+module_exit(omap3pandora_soc_exit);
+
+MODULE_AUTHOR("Grazvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC OMAP3 Pandora");
+MODULE_LICENSE("GPL");
/* Set codec DAI configuration */
err = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_DSP_B |
SND_SOC_DAIFMT_NB_IF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
/* Set cpu DAI configuration */
err = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_DSP_A |
+ SND_SOC_DAIFMT_DSP_B |
SND_SOC_DAIFMT_NB_IF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
};
/* Audio machine driver */
-static struct snd_soc_machine snd_soc_machine_osk = {
+static struct snd_soc_card snd_soc_card_osk = {
.name = "OSK5912",
+ .platform = &omap_soc_platform,
.dai_link = &osk_dai,
.num_links = 1,
};
/* Audio subsystem */
static struct snd_soc_device osk_snd_devdata = {
- .machine = &snd_soc_machine_osk,
- .platform = &omap_soc_platform,
+ .card = &snd_soc_card_osk,
.codec_dev = &soc_codec_dev_tlv320aic23,
};
--- /dev/null
+/*
+ * overo.c -- SoC audio for Gumstix Overo
+ *
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int overo_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops overo_ops = {
+ .hw_params = overo_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link overo_dai = {
+ .name = "TWL4030",
+ .stream_name = "TWL4030",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai,
+ .ops = &overo_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_card snd_soc_card_overo = {
+ .name = "overo",
+ .platform = &omap_soc_platform,
+ .dai_link = &overo_dai,
+ .num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device overo_snd_devdata = {
+ .card = &snd_soc_card_overo,
+ .codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *overo_snd_device;
+
+static int __init overo_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_overo()) {
+ pr_debug("Not Overo!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "overo SoC init\n");
+
+ overo_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!overo_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(overo_snd_device, &overo_snd_devdata);
+ overo_snd_devdata.dev = &overo_snd_device->dev;
+ *(unsigned int *)overo_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+ ret = platform_device_add(overo_snd_device);
+ if (ret)
+ goto err1;
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(overo_snd_device);
+
+ return ret;
+}
+module_init(overo_soc_init);
+
+static void __exit overo_soc_exit(void)
+{
+ platform_device_unregister(overo_snd_device);
+}
+module_exit(overo_soc_exit);
+
+MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>");
+MODULE_DESCRIPTION("ALSA SoC overo");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * sdp3430.c -- SoC audio for TI OMAP3430 SDP
+ *
+ * Author: Misael Lopez Cruz <x0052729@ti.com>
+ *
+ * Based on:
+ * Author: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/mcbsp.h>
+
+#include "omap-mcbsp.h"
+#include "omap-pcm.h"
+#include "../codecs/twl4030.h"
+
+static int sdp3430_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret;
+
+ /* Set codec DAI configuration */
+ ret = snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec DAI configuration\n");
+ return ret;
+ }
+
+ /* Set cpu DAI configuration */
+ ret = snd_soc_dai_set_fmt(cpu_dai,
+ SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set cpu DAI configuration\n");
+ return ret;
+ }
+
+ /* Set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "can't set codec system clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops sdp3430_ops = {
+ .hw_params = sdp3430_hw_params,
+};
+
+/* Digital audio interface glue - connects codec <--> CPU */
+static struct snd_soc_dai_link sdp3430_dai = {
+ .name = "TWL4030",
+ .stream_name = "TWL4030",
+ .cpu_dai = &omap_mcbsp_dai[0],
+ .codec_dai = &twl4030_dai,
+ .ops = &sdp3430_ops,
+};
+
+/* Audio machine driver */
+static struct snd_soc_machine snd_soc_machine_sdp3430 = {
+ .name = "SDP3430",
+ .platform = &omap_soc_platform,
+ .dai_link = &sdp3430_dai,
+ .num_links = 1,
+};
+
+/* Audio subsystem */
+static struct snd_soc_device sdp3430_snd_devdata = {
+ .machine = &snd_soc_machine_sdp3430,
+ .codec_dev = &soc_codec_dev_twl4030,
+};
+
+static struct platform_device *sdp3430_snd_device;
+
+static int __init sdp3430_soc_init(void)
+{
+ int ret;
+
+ if (!machine_is_omap_3430sdp()) {
+ pr_debug("Not SDP3430!\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "SDP3430 SoC init\n");
+
+ sdp3430_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!sdp3430_snd_device) {
+ printk(KERN_ERR "Platform device allocation failed\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(sdp3430_snd_device, &sdp3430_snd_devdata);
+ sdp3430_snd_devdata.dev = &sdp3430_snd_device->dev;
+ *(unsigned int *)sdp3430_dai.cpu_dai->private_data = 1; /* McBSP2 */
+
+ ret = platform_device_add(sdp3430_snd_device);
+ if (ret)
+ goto err1;
+
+ return 0;
+
+err1:
+ printk(KERN_ERR "Unable to add platform device\n");
+ platform_device_put(sdp3430_snd_device);
+
+ return ret;
+}
+module_init(sdp3430_soc_init);
+
+static void __exit sdp3430_soc_exit(void)
+{
+ platform_device_unregister(sdp3430_snd_device);
+}
+module_exit(sdp3430_soc_exit);
+
+MODULE_AUTHOR("Misael Lopez Cruz <x0052729@ti.com>");
+MODULE_DESCRIPTION("ALSA SoC SDP3430");
+MODULE_LICENSE("GPL");
+
config SND_PXA2XX_SOC_I2S
tristate
+config SND_PXA_SOC_SSP
+ tristate
+
config SND_PXA2XX_SOC_CORGI
tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx
help
Say Y if you want to add support for SoC audio on
CompuLab EM-x270.
+
+config SND_PXA2XX_SOC_PALM27X
+ bool "SoC Audio support for Palm T|X, T5 and LifeDrive"
+ depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || MACH_PALMT5)
+ select SND_PXA2XX_SOC_AC97
+ select SND_SOC_WM9712
+ help
+ Say Y if you want to add support for SoC audio on
+ Palm T|X, T5 or LifeDrive handheld computer.
+
+config SND_SOC_ZYLONITE
+ tristate "SoC Audio support for Marvell Zylonite"
+ depends on SND_PXA2XX_SOC && MACH_ZYLONITE
+ select SND_PXA2XX_SOC_AC97
+ select SND_PXA_SOC_SSP
+ select SND_SOC_WM9713
+ help
+ Say Y if you want to add support for SoC audio on the
+ Marvell Zylonite reference platform.
snd-soc-pxa2xx-objs := pxa2xx-pcm.o
snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o
snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o
+snd-soc-pxa-ssp-objs := pxa-ssp.o
obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o
obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o
obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o
+obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o
# PXA Machine Support
snd-soc-corgi-objs := corgi.o
snd-soc-e800-objs := e800_wm9712.o
snd-soc-spitz-objs := spitz.o
snd-soc-em-x270-objs := em-x270.o
+snd-soc-palm27x-objs := palm27x.o
+snd-soc-zylonite-objs := zylonite.o
obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o
obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o
obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o
obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o
obj-$(CONFIG_SND_PXA2XX_SOC_EM_X270) += snd-soc-em-x270.o
+obj-$(CONFIG_SND_PXA2XX_SOC_PALM27X) += snd-soc-palm27x.o
+obj-$(CONFIG_SND_SOC_ZYLONITE) += snd-soc-zylonite.o
}
/* we need to unmute the HP at shutdown as the mute burns power on corgi */
-static int corgi_shutdown(struct snd_pcm_substream *substream)
+static void corgi_shutdown(struct snd_pcm_substream *substream)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_codec *codec = rtd->socdev->codec;
-
/* set = unmute headphone */
gpio_set_value(CORGI_GPIO_MUTE_L, 1);
gpio_set_value(CORGI_GPIO_MUTE_R, 1);
- return 0;
}
static int corgi_hw_params(struct snd_pcm_substream *substream,
};
/* corgi audio machine driver */
-static struct snd_soc_machine snd_soc_machine_corgi = {
+static struct snd_soc_card snd_soc_corgi = {
.name = "Corgi",
+ .platform = &pxa2xx_soc_platform,
.dai_link = &corgi_dai,
.num_links = 1,
};
/* corgi audio subsystem */
static struct snd_soc_device corgi_snd_devdata = {
- .machine = &snd_soc_machine_corgi,
- .platform = &pxa2xx_soc_platform,
+ .card = &snd_soc_corgi,
.codec_dev = &soc_codec_dev_wm8731,
.codec_data = &corgi_wm8731_setup,
};
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
-static struct snd_soc_machine e800;
+static struct snd_soc_card e800;
static struct snd_soc_dai_link e800_dai[] = {
{
},
};
-static struct snd_soc_machine e800 = {
+static struct snd_soc_card e800 = {
.name = "Toshiba e800",
+ .platform = &pxa2xx_soc_platform,
.dai_link = e800_dai,
.num_links = ARRAY_SIZE(e800_dai),
};
static struct snd_soc_device e800_snd_devdata = {
- .machine = &e800,
- .platform = &pxa2xx_soc_platform,
+ .card = &e800,
.codec_dev = &soc_codec_dev_wm9712,
};
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <sound/driver.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
},
};
-static struct snd_soc_machine em_x270 = {
+static struct snd_soc_card em_x270 = {
.name = "EM-X270",
+ .platform = &pxa2xx_soc_platform,
.dai_link = em_x270_dai,
.num_links = ARRAY_SIZE(em_x270_dai),
};
static struct snd_soc_device em_x270_snd_devdata = {
- .machine = &em_x270,
- .platform = &pxa2xx_soc_platform,
+ .card = &em_x270,
.codec_dev = &soc_codec_dev_wm9712,
};
--- /dev/null
+/*
+ * linux/sound/soc/pxa/palm27x.c
+ *
+ * SoC Audio driver for Palm T|X, T5 and LifeDrive
+ *
+ * based on tosa.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include <asm/mach-types.h>
+#include <mach/audio.h>
+#include <mach/palmasoc.h>
+
+#include "../codecs/wm9712.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-ac97.h"
+
+static int palm27x_jack_func = 1;
+static int palm27x_spk_func = 1;
+static int palm27x_ep_gpio = -1;
+
+static void palm27x_ext_control(struct snd_soc_codec *codec)
+{
+ if (!palm27x_spk_func)
+ snd_soc_dapm_enable_pin(codec, "Speaker");
+ else
+ snd_soc_dapm_disable_pin(codec, "Speaker");
+
+ if (!palm27x_jack_func)
+ snd_soc_dapm_enable_pin(codec, "Headphone Jack");
+ else
+ snd_soc_dapm_disable_pin(codec, "Headphone Jack");
+
+ snd_soc_dapm_sync(codec);
+}
+
+static int palm27x_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_codec *codec = rtd->socdev->codec;
+
+ /* check the jack status at stream startup */
+ palm27x_ext_control(codec);
+ return 0;
+}
+
+static struct snd_soc_ops palm27x_ops = {
+ .startup = palm27x_startup,
+};
+
+static irqreturn_t palm27x_interrupt(int irq, void *v)
+{
+ palm27x_spk_func = gpio_get_value(palm27x_ep_gpio);
+ palm27x_jack_func = !palm27x_spk_func;
+ return IRQ_HANDLED;
+}
+
+static int palm27x_get_jack(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = palm27x_jack_func;
+ return 0;
+}
+
+static int palm27x_set_jack(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (palm27x_jack_func == ucontrol->value.integer.value[0])
+ return 0;
+
+ palm27x_jack_func = ucontrol->value.integer.value[0];
+ palm27x_ext_control(codec);
+ return 1;
+}
+
+static int palm27x_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = palm27x_spk_func;
+ return 0;
+}
+
+static int palm27x_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
+
+ if (palm27x_spk_func == ucontrol->value.integer.value[0])
+ return 0;
+
+ palm27x_spk_func = ucontrol->value.integer.value[0];
+ palm27x_ext_control(codec);
+ return 1;
+}
+
+/* PalmTX machine dapm widgets */
+static const struct snd_soc_dapm_widget palm27x_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+/* PalmTX audio map */
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* headphone connected to HPOUTL, HPOUTR */
+ {"Headphone Jack", NULL, "HPOUTL"},
+ {"Headphone Jack", NULL, "HPOUTR"},
+
+ /* ext speaker connected to ROUT2, LOUT2 */
+ {"Speaker", NULL, "LOUT2"},
+ {"Speaker", NULL, "ROUT2"},
+};
+
+static const char *jack_function[] = {"Headphone", "Off"};
+static const char *spk_function[] = {"On", "Off"};
+static const struct soc_enum palm27x_enum[] = {
+ SOC_ENUM_SINGLE_EXT(2, jack_function),
+ SOC_ENUM_SINGLE_EXT(2, spk_function),
+};
+
+static const struct snd_kcontrol_new palm27x_controls[] = {
+ SOC_ENUM_EXT("Jack Function", palm27x_enum[0], palm27x_get_jack,
+ palm27x_set_jack),
+ SOC_ENUM_EXT("Speaker Function", palm27x_enum[1], palm27x_get_spk,
+ palm27x_set_spk),
+};
+
+static int palm27x_ac97_init(struct snd_soc_codec *codec)
+{
+ int i, err;
+
+ snd_soc_dapm_nc_pin(codec, "OUT3");
+ snd_soc_dapm_nc_pin(codec, "MONOOUT");
+
+ /* add palm27x specific controls */
+ for (i = 0; i < ARRAY_SIZE(palm27x_controls); i++) {
+ err = snd_ctl_add(codec->card,
+ snd_soc_cnew(&palm27x_controls[i],
+ codec, NULL));
+ if (err < 0)
+ return err;
+ }
+
+ /* add palm27x specific widgets */
+ snd_soc_dapm_new_controls(codec, palm27x_dapm_widgets,
+ ARRAY_SIZE(palm27x_dapm_widgets));
+
+ /* set up palm27x specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ snd_soc_dapm_sync(codec);
+ return 0;
+}
+
+static struct snd_soc_dai_link palm27x_dai[] = {
+{
+ .name = "AC97 HiFi",
+ .stream_name = "AC97 HiFi",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
+ .codec_dai = &wm9712_dai[WM9712_DAI_AC97_HIFI],
+ .init = palm27x_ac97_init,
+ .ops = &palm27x_ops,
+},
+{
+ .name = "AC97 Aux",
+ .stream_name = "AC97 Aux",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
+ .codec_dai = &wm9712_dai[WM9712_DAI_AC97_AUX],
+ .ops = &palm27x_ops,
+},
+};
+
+static struct snd_soc_card palm27x_asoc = {
+ .name = "Palm/PXA27x",
+ .platform = &pxa2xx_soc_platform,
+ .dai_link = palm27x_dai,
+ .num_links = ARRAY_SIZE(palm27x_dai),
+};
+
+static struct snd_soc_device palm27x_snd_devdata = {
+ .card = &palm27x_asoc,
+ .codec_dev = &soc_codec_dev_wm9712,
+};
+
+static struct platform_device *palm27x_snd_device;
+
+static int __init palm27x_asoc_init(void)
+{
+ int ret;
+
+ if (!(machine_is_palmtx() || machine_is_palmt5() ||
+ machine_is_palmld()))
+ return -ENODEV;
+
+ ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
+ if (ret)
+ return ret;
+ ret = gpio_direction_input(palm27x_ep_gpio);
+ if (ret)
+ goto err_alloc;
+
+ if (request_irq(gpio_to_irq(palm27x_ep_gpio), palm27x_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "Headphone jack", NULL))
+ goto err_alloc;
+
+ palm27x_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!palm27x_snd_device) {
+ ret = -ENOMEM;
+ goto err_dev;
+ }
+
+ platform_set_drvdata(palm27x_snd_device, &palm27x_snd_devdata);
+ palm27x_snd_devdata.dev = &palm27x_snd_device->dev;
+ ret = platform_device_add(palm27x_snd_device);
+
+ if (ret != 0)
+ goto put_device;
+
+ return 0;
+
+put_device:
+ platform_device_put(palm27x_snd_device);
+err_dev:
+ free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
+err_alloc:
+ gpio_free(palm27x_ep_gpio);
+
+ return ret;
+}
+
+static void __exit palm27x_asoc_exit(void)
+{
+ free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
+ gpio_free(palm27x_ep_gpio);
+ platform_device_unregister(palm27x_snd_device);
+}
+
+void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+{
+ palm27x_ep_gpio = data->jack_gpio;
+}
+
+module_init(palm27x_asoc_init);
+module_exit(palm27x_asoc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC Palm T|X, T5 and LifeDrive");
+MODULE_LICENSE("GPL");
};
/* poodle audio machine driver */
-static struct snd_soc_machine snd_soc_machine_poodle = {
+static struct snd_soc_card snd_soc_poodle = {
.name = "Poodle",
+ .platform = &pxa2xx_soc_platform,
.dai_link = &poodle_dai,
.num_links = 1,
};
/* poodle audio subsystem */
static struct snd_soc_device poodle_snd_devdata = {
- .machine = &snd_soc_machine_poodle,
- .platform = &pxa2xx_soc_platform,
+ .card = &snd_soc_poodle,
.codec_dev = &soc_codec_dev_wm8731,
.codec_data = &poodle_wm8731_setup,
};
--- /dev/null
+#define DEBUG
+/*
+ * pxa-ssp.c -- ALSA Soc Audio Layer
+ *
+ * Copyright 2005,2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ * Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * TODO:
+ * o Test network mode for > 16bit sample size
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/initval.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/pxa2xx-lib.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
+#include <mach/audio.h>
+#include <mach/ssp.h>
+
+#include "pxa2xx-pcm.h"
+#include "pxa-ssp.h"
+
+/*
+ * SSP audio private data
+ */
+struct ssp_priv {
+ struct ssp_dev dev;
+ unsigned int sysclk;
+ int dai_fmt;
+#ifdef CONFIG_PM
+ struct ssp_state state;
+#endif
+};
+
+#define PXA2xx_SSP1_BASE 0x41000000
+#define PXA27x_SSP2_BASE 0x41700000
+#define PXA27x_SSP3_BASE 0x41900000
+#define PXA3xx_SSP4_BASE 0x41a00000
+
+static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
+ .name = "SSP1 PCM Mono out",
+ .dev_addr = PXA2xx_SSP1_BASE + SSDR,
+ .drcmr = &DRCMR(14),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
+ .name = "SSP1 PCM Mono in",
+ .dev_addr = PXA2xx_SSP1_BASE + SSDR,
+ .drcmr = &DRCMR(13),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
+ .name = "SSP1 PCM Stereo out",
+ .dev_addr = PXA2xx_SSP1_BASE + SSDR,
+ .drcmr = &DRCMR(14),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
+ .name = "SSP1 PCM Stereo in",
+ .dev_addr = PXA2xx_SSP1_BASE + SSDR,
+ .drcmr = &DRCMR(13),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
+ .name = "SSP2 PCM Mono out",
+ .dev_addr = PXA27x_SSP2_BASE + SSDR,
+ .drcmr = &DRCMR(16),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
+ .name = "SSP2 PCM Mono in",
+ .dev_addr = PXA27x_SSP2_BASE + SSDR,
+ .drcmr = &DRCMR(15),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
+ .name = "SSP2 PCM Stereo out",
+ .dev_addr = PXA27x_SSP2_BASE + SSDR,
+ .drcmr = &DRCMR(16),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
+ .name = "SSP2 PCM Stereo in",
+ .dev_addr = PXA27x_SSP2_BASE + SSDR,
+ .drcmr = &DRCMR(15),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
+ .name = "SSP3 PCM Mono out",
+ .dev_addr = PXA27x_SSP3_BASE + SSDR,
+ .drcmr = &DRCMR(67),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
+ .name = "SSP3 PCM Mono in",
+ .dev_addr = PXA27x_SSP3_BASE + SSDR,
+ .drcmr = &DRCMR(66),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
+ .name = "SSP3 PCM Stereo out",
+ .dev_addr = PXA27x_SSP3_BASE + SSDR,
+ .drcmr = &DRCMR(67),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
+ .name = "SSP3 PCM Stereo in",
+ .dev_addr = PXA27x_SSP3_BASE + SSDR,
+ .drcmr = &DRCMR(66),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
+ .name = "SSP4 PCM Mono out",
+ .dev_addr = PXA3xx_SSP4_BASE + SSDR,
+ .drcmr = &DRCMR(67),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
+ .name = "SSP4 PCM Mono in",
+ .dev_addr = PXA3xx_SSP4_BASE + SSDR,
+ .drcmr = &DRCMR(66),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH2,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
+ .name = "SSP4 PCM Stereo out",
+ .dev_addr = PXA3xx_SSP4_BASE + SSDR,
+ .drcmr = &DRCMR(67),
+ .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
+ .name = "SSP4 PCM Stereo in",
+ .dev_addr = PXA3xx_SSP4_BASE + SSDR,
+ .drcmr = &DRCMR(66),
+ .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
+ DCMD_BURST16 | DCMD_WIDTH4,
+};
+
+static void dump_registers(struct ssp_device *ssp)
+{
+ dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
+ ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1),
+ ssp_read_reg(ssp, SSTO));
+
+ dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
+ ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR),
+ ssp_read_reg(ssp, SSACD));
+}
+
+static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
+ {
+ &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
+ &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
+ },
+ {
+ &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
+ &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
+ },
+ {
+ &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
+ &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
+ },
+ {
+ &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
+ &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
+ },
+};
+
+static int pxa_ssp_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct ssp_priv *priv = cpu_dai->private_data;
+ int ret = 0;
+
+ if (!cpu_dai->active) {
+ ret = ssp_init(&priv->dev, cpu_dai->id + 1, SSP_NO_IRQ);
+ if (ret < 0)
+ return ret;
+ ssp_disable(&priv->dev);
+ }
+ return ret;
+}
+
+static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct ssp_priv *priv = cpu_dai->private_data;
+
+ if (!cpu_dai->active) {
+ ssp_disable(&priv->dev);
+ ssp_exit(&priv->dev);
+ }
+}
+
+#ifdef CONFIG_PM
+
+static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssp_save_state(&priv->dev, &priv->state);
+ clk_disable(priv->dev.ssp->clk);
+ return 0;
+}
+
+static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ clk_enable(priv->dev.ssp->clk);
+ ssp_restore_state(&priv->dev, &priv->state);
+ ssp_enable(&priv->dev);
+
+ return 0;
+}
+
+#else
+#define pxa_ssp_suspend NULL
+#define pxa_ssp_resume NULL
+#endif
+
+/**
+ * ssp_set_clkdiv - set SSP clock divider
+ * @div: serial clock rate divider
+ */
+static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+{
+ struct ssp_device *ssp = dev->ssp;
+ u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+
+ ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+}
+
+/*
+ * Set the SSP ports SYSCLK.
+ */
+static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ int val;
+
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0) &
+ ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC);
+
+ dev_dbg(&ssp->pdev->dev,
+ "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n",
+ cpu_dai->id, clk_id, freq);
+
+ switch (clk_id) {
+ case PXA_SSP_CLK_NET_PLL:
+ sscr0 |= SSCR0_MOD;
+ break;
+ case PXA_SSP_CLK_PLL:
+ /* Internal PLL is fixed */
+ if (cpu_is_pxa25x())
+ priv->sysclk = 1843200;
+ else
+ priv->sysclk = 13000000;
+ break;
+ case PXA_SSP_CLK_EXT:
+ priv->sysclk = freq;
+ sscr0 |= SSCR0_ECS;
+ break;
+ case PXA_SSP_CLK_NET:
+ priv->sysclk = freq;
+ sscr0 |= SSCR0_NCS | SSCR0_MOD;
+ break;
+ case PXA_SSP_CLK_AUDIO:
+ priv->sysclk = 0;
+ ssp_set_scr(&priv->dev, 1);
+ sscr0 |= SSCR0_ADC;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /* The SSP clock must be disabled when changing SSP clock mode
+ * on PXA2xx. On PXA3xx it must be enabled when doing so. */
+ if (!cpu_is_pxa3xx())
+ clk_disable(priv->dev.ssp->clk);
+ val = ssp_read_reg(ssp, SSCR0) | sscr0;
+ ssp_write_reg(ssp, SSCR0, val);
+ if (!cpu_is_pxa3xx())
+ clk_enable(priv->dev.ssp->clk);
+
+ return 0;
+}
+
+/*
+ * Set the SSP clock dividers.
+ */
+static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ int val;
+
+ switch (div_id) {
+ case PXA_SSP_AUDIO_DIV_ACDS:
+ val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div);
+ ssp_write_reg(ssp, SSACD, val);
+ break;
+ case PXA_SSP_AUDIO_DIV_SCDB:
+ val = ssp_read_reg(ssp, SSACD);
+ val &= ~SSACD_SCDB;
+#if defined(CONFIG_PXA3xx)
+ if (cpu_is_pxa3xx())
+ val &= ~SSACD_SCDX8;
+#endif
+ switch (div) {
+ case PXA_SSP_CLK_SCDB_1:
+ val |= SSACD_SCDB;
+ break;
+ case PXA_SSP_CLK_SCDB_4:
+ break;
+#if defined(CONFIG_PXA3xx)
+ case PXA_SSP_CLK_SCDB_8:
+ if (cpu_is_pxa3xx())
+ val |= SSACD_SCDX8;
+ else
+ return -EINVAL;
+ break;
+#endif
+ default:
+ return -EINVAL;
+ }
+ ssp_write_reg(ssp, SSACD, val);
+ break;
+ case PXA_SSP_DIV_SCR:
+ ssp_set_scr(&priv->dev, div);
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the PLL frequency pxa27x and (afaik - pxa320 only)
+ */
+static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai,
+ int pll_id, unsigned int freq_in, unsigned int freq_out)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70;
+
+#if defined(CONFIG_PXA3xx)
+ if (cpu_is_pxa3xx())
+ ssp_write_reg(ssp, SSACDD, 0);
+#endif
+
+ switch (freq_out) {
+ case 5622000:
+ break;
+ case 11345000:
+ ssacd |= (0x1 << 4);
+ break;
+ case 12235000:
+ ssacd |= (0x2 << 4);
+ break;
+ case 14857000:
+ ssacd |= (0x3 << 4);
+ break;
+ case 32842000:
+ ssacd |= (0x4 << 4);
+ break;
+ case 48000000:
+ ssacd |= (0x5 << 4);
+ break;
+ case 0:
+ /* Disable */
+ break;
+
+ default:
+#ifdef CONFIG_PXA3xx
+ /* PXA3xx has a clock ditherer which can be used to generate
+ * a wider range of frequencies - calculate a value for it.
+ */
+ if (cpu_is_pxa3xx()) {
+ u32 val;
+ u64 tmp = 19968;
+ tmp *= 1000000;
+ do_div(tmp, freq_out);
+ val = tmp;
+
+ val = (val << 16) | 64;;
+ ssp_write_reg(ssp, SSACDD, val);
+
+ ssacd |= (0x6 << 4);
+
+ dev_dbg(&ssp->pdev->dev,
+ "Using SSACDD %x to supply %dHz\n",
+ val, freq_out);
+ break;
+ }
+#endif
+
+ return -EINVAL;
+ }
+
+ ssp_write_reg(ssp, SSACD, ssacd);
+
+ return 0;
+}
+
+/*
+ * Set the active slots in TDM/Network mode
+ */
+static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+ unsigned int mask, int slots)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ u32 sscr0;
+
+ sscr0 = ssp_read_reg(ssp, SSCR0) & ~SSCR0_SlotsPerFrm(7);
+
+ /* set number of active slots */
+ sscr0 |= SSCR0_SlotsPerFrm(slots);
+ ssp_write_reg(ssp, SSCR0, sscr0);
+
+ /* set active slot mask */
+ ssp_write_reg(ssp, SSTSA, mask);
+ ssp_write_reg(ssp, SSRSA, mask);
+ return 0;
+}
+
+/*
+ * Tristate the SSP DAI lines
+ */
+static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
+ int tristate)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ u32 sscr1;
+
+ sscr1 = ssp_read_reg(ssp, SSCR1);
+ if (tristate)
+ sscr1 &= ~SSCR1_TTE;
+ else
+ sscr1 |= SSCR1_TTE;
+ ssp_write_reg(ssp, SSCR1, sscr1);
+
+ return 0;
+}
+
+/*
+ * Set up the SSP DAI format.
+ * The SSP Port must be inactive before calling this function as the
+ * physical interface format is changed.
+ */
+static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ u32 sscr0;
+ u32 sscr1;
+ u32 sspsp;
+
+ /* reset port settings */
+ sscr0 = ssp_read_reg(ssp, SSCR0) &
+ (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC);
+ sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
+ sspsp = 0;
+
+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFM:
+ sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR;
+ break;
+ case SND_SOC_DAIFMT_CBM_CFS:
+ sscr1 |= SSCR1_SCLKDIR;
+ break;
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ssp_write_reg(ssp, SSCR0, sscr0);
+ ssp_write_reg(ssp, SSCR1, sscr1);
+ ssp_write_reg(ssp, SSPSP, sspsp);
+
+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ sscr0 |= SSCR0_MOD | SSCR0_PSP;
+ sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ sspsp |= SSPSP_FSRT;
+ break;
+ case SND_SOC_DAIFMT_NB_IF:
+ sspsp |= SSPSP_SFRMP | SSPSP_FSRT;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ sspsp |= SSPSP_SFRMP;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A:
+ sspsp |= SSPSP_FSRT;
+ case SND_SOC_DAIFMT_DSP_B:
+ sscr0 |= SSCR0_MOD | SSCR0_PSP;
+ sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
+
+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ case SND_SOC_DAIFMT_NB_NF:
+ sspsp |= SSPSP_SFRMP;
+ break;
+ case SND_SOC_DAIFMT_IB_IF:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ ssp_write_reg(ssp, SSCR0, sscr0);
+ ssp_write_reg(ssp, SSCR1, sscr1);
+ ssp_write_reg(ssp, SSPSP, sspsp);
+
+ dump_registers(ssp);
+
+ /* Since we are configuring the timings for the format by hand
+ * we have to defer some things until hw_params() where we
+ * know parameters like the sample size.
+ */
+ priv->dai_fmt = fmt;
+
+ return 0;
+}
+
+/*
+ * Set the SSP audio DMA parameters and sample size.
+ * Can be called multiple times by oss emulation.
+ */
+static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ int dma = 0, chn = params_channels(params);
+ u32 sscr0;
+ u32 sspsp;
+ int width = snd_pcm_format_physical_width(params_format(params));
+
+ /* select correct DMA params */
+ if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
+ dma = 1; /* capture DMA offset is 1,3 */
+ if (chn == 2)
+ dma += 2; /* stereo DMA offset is 2, mono is 0 */
+ cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
+
+ dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
+
+ /* we can only change the settings if the port is not in use */
+ if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
+ return 0;
+
+ /* clear selected SSP bits */
+ sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
+ ssp_write_reg(ssp, SSCR0, sscr0);
+
+ /* bit size */
+ sscr0 = ssp_read_reg(ssp, SSCR0);
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S16_LE:
+#ifdef CONFIG_PXA3xx
+ if (cpu_is_pxa3xx())
+ sscr0 |= SSCR0_FPCKE;
+#endif
+ sscr0 |= SSCR0_DataSize(16);
+ if (params_channels(params) > 1)
+ sscr0 |= SSCR0_EDSS;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
+ /* we must be in network mode (2 slots) for 24 bit stereo */
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
+ /* we must be in network mode (2 slots) for 32 bit stereo */
+ break;
+ }
+ ssp_write_reg(ssp, SSCR0, sscr0);
+
+ switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_I2S:
+ /* Cleared when the DAI format is set */
+ sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width);
+ ssp_write_reg(ssp, SSPSP, sspsp);
+ break;
+ default:
+ break;
+ }
+
+ /* We always use a network mode so we always require TDM slots
+ * - complain loudly and fail if they've not been set up yet.
+ */
+ if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) {
+ dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
+ return -EINVAL;
+ }
+
+ dump_registers(ssp);
+
+ return 0;
+}
+
+static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ int ret = 0;
+ struct ssp_priv *priv = cpu_dai->private_data;
+ struct ssp_device *ssp = priv->dev.ssp;
+ int val;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_RESUME:
+ ssp_enable(&priv->dev);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ val = ssp_read_reg(ssp, SSCR1);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ val |= SSCR1_TSRE;
+ else
+ val |= SSCR1_RSRE;
+ ssp_write_reg(ssp, SSCR1, val);
+ val = ssp_read_reg(ssp, SSSR);
+ ssp_write_reg(ssp, SSSR, val);
+ break;
+ case SNDRV_PCM_TRIGGER_START:
+ val = ssp_read_reg(ssp, SSCR1);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ val |= SSCR1_TSRE;
+ else
+ val |= SSCR1_RSRE;
+ ssp_write_reg(ssp, SSCR1, val);
+ ssp_enable(&priv->dev);
+ break;
+ case SNDRV_PCM_TRIGGER_STOP:
+ val = ssp_read_reg(ssp, SSCR1);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ val &= ~SSCR1_TSRE;
+ else
+ val &= ~SSCR1_RSRE;
+ ssp_write_reg(ssp, SSCR1, val);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ ssp_disable(&priv->dev);
+ break;
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ val = ssp_read_reg(ssp, SSCR1);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ val &= ~SSCR1_TSRE;
+ else
+ val &= ~SSCR1_RSRE;
+ ssp_write_reg(ssp, SSCR1, val);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ dump_registers(ssp);
+
+ return ret;
+}
+
+static int pxa_ssp_probe(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ struct ssp_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev.ssp = ssp_request(dai->id, "SoC audio");
+ if (priv->dev.ssp == NULL) {
+ ret = -ENODEV;
+ goto err_priv;
+ }
+
+ dai->private_data = priv;
+
+ return 0;
+
+err_priv:
+ kfree(priv);
+ return ret;
+}
+
+static void pxa_ssp_remove(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
+{
+ struct ssp_priv *priv = dai->private_data;
+ ssp_free(priv->dev.ssp);
+}
+
+#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
+ SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
+
+#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai pxa_ssp_dai[] = {
+ {
+ .name = "pxa2xx-ssp1",
+ .id = 0,
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .suspend = pxa_ssp_suspend,
+ .resume = pxa_ssp_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .ops = {
+ .startup = pxa_ssp_startup,
+ .shutdown = pxa_ssp_shutdown,
+ .trigger = pxa_ssp_trigger,
+ .hw_params = pxa_ssp_hw_params,
+ .set_sysclk = pxa_ssp_set_dai_sysclk,
+ .set_clkdiv = pxa_ssp_set_dai_clkdiv,
+ .set_pll = pxa_ssp_set_dai_pll,
+ .set_fmt = pxa_ssp_set_dai_fmt,
+ .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
+ .set_tristate = pxa_ssp_set_dai_tristate,
+ },
+ },
+ { .name = "pxa2xx-ssp2",
+ .id = 1,
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .suspend = pxa_ssp_suspend,
+ .resume = pxa_ssp_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .ops = {
+ .startup = pxa_ssp_startup,
+ .shutdown = pxa_ssp_shutdown,
+ .trigger = pxa_ssp_trigger,
+ .hw_params = pxa_ssp_hw_params,
+ .set_sysclk = pxa_ssp_set_dai_sysclk,
+ .set_clkdiv = pxa_ssp_set_dai_clkdiv,
+ .set_pll = pxa_ssp_set_dai_pll,
+ .set_fmt = pxa_ssp_set_dai_fmt,
+ .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
+ .set_tristate = pxa_ssp_set_dai_tristate,
+ },
+ },
+ {
+ .name = "pxa2xx-ssp3",
+ .id = 2,
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .suspend = pxa_ssp_suspend,
+ .resume = pxa_ssp_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .ops = {
+ .startup = pxa_ssp_startup,
+ .shutdown = pxa_ssp_shutdown,
+ .trigger = pxa_ssp_trigger,
+ .hw_params = pxa_ssp_hw_params,
+ .set_sysclk = pxa_ssp_set_dai_sysclk,
+ .set_clkdiv = pxa_ssp_set_dai_clkdiv,
+ .set_pll = pxa_ssp_set_dai_pll,
+ .set_fmt = pxa_ssp_set_dai_fmt,
+ .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
+ .set_tristate = pxa_ssp_set_dai_tristate,
+ },
+ },
+ {
+ .name = "pxa2xx-ssp4",
+ .id = 3,
+ .probe = pxa_ssp_probe,
+ .remove = pxa_ssp_remove,
+ .suspend = pxa_ssp_suspend,
+ .resume = pxa_ssp_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = PXA_SSP_RATES,
+ .formats = PXA_SSP_FORMATS,
+ },
+ .ops = {
+ .startup = pxa_ssp_startup,
+ .shutdown = pxa_ssp_shutdown,
+ .trigger = pxa_ssp_trigger,
+ .hw_params = pxa_ssp_hw_params,
+ .set_sysclk = pxa_ssp_set_dai_sysclk,
+ .set_clkdiv = pxa_ssp_set_dai_clkdiv,
+ .set_pll = pxa_ssp_set_dai_pll,
+ .set_fmt = pxa_ssp_set_dai_fmt,
+ .set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
+ .set_tristate = pxa_ssp_set_dai_tristate,
+ },
+ },
+};
+EXPORT_SYMBOL_GPL(pxa_ssp_dai);
+
+static int __init pxa_ssp_init(void)
+{
+ return snd_soc_register_dais(pxa_ssp_dai, ARRAY_SIZE(pxa_ssp_dai));
+}
+module_init(pxa_ssp_init);
+
+static void __exit pxa_ssp_exit(void)
+{
+ snd_soc_unregister_dais(pxa_ssp_dai, ARRAY_SIZE(pxa_ssp_dai));
+}
+module_exit(pxa_ssp_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ASoC PXA SSP port support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _PXA_SSP_H
+#define _PXA_SSP_H
+
+/* pxa DAI SSP IDs */
+#define PXA_DAI_SSP1 0
+#define PXA_DAI_SSP2 1
+#define PXA_DAI_SSP3 2
+#define PXA_DAI_SSP4 3
+
+/* SSP clock sources */
+#define PXA_SSP_CLK_PLL 0
+#define PXA_SSP_CLK_EXT 1
+#define PXA_SSP_CLK_NET 2
+#define PXA_SSP_CLK_AUDIO 3
+#define PXA_SSP_CLK_NET_PLL 4
+
+/* SSP audio dividers */
+#define PXA_SSP_AUDIO_DIV_ACDS 0
+#define PXA_SSP_AUDIO_DIV_SCDB 1
+#define PXA_SSP_DIV_SCR 2
+
+/* SSP ACDS audio dividers values */
+#define PXA_SSP_CLK_AUDIO_DIV_1 0
+#define PXA_SSP_CLK_AUDIO_DIV_2 1
+#define PXA_SSP_CLK_AUDIO_DIV_4 2
+#define PXA_SSP_CLK_AUDIO_DIV_8 3
+#define PXA_SSP_CLK_AUDIO_DIV_16 4
+#define PXA_SSP_CLK_AUDIO_DIV_32 5
+
+/* SSP divider bypass */
+#define PXA_SSP_CLK_SCDB_4 0
+#define PXA_SSP_CLK_SCDB_1 1
+#define PXA_SSP_CLK_SCDB_8 2
+
+#define PXA_SSP_PLL_OUT 0
+
+extern struct snd_soc_dai pxa_ssp_dai[4];
+
+#endif
};
#ifdef CONFIG_PM
-static int pxa2xx_ac97_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int pxa2xx_ac97_suspend(struct snd_soc_dai *dai)
{
return pxa2xx_ac97_hw_suspend();
}
-static int pxa2xx_ac97_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int pxa2xx_ac97_resume(struct snd_soc_dai *dai)
{
return pxa2xx_ac97_hw_resume();
}
}
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
{
.name = "pxa2xx-ac97",
.id = 0,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.probe = pxa2xx_ac97_probe,
.remove = pxa2xx_ac97_remove,
.suspend = pxa2xx_ac97_suspend,
{
.name = "pxa2xx-ac97-aux",
.id = 1,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.playback = {
.stream_name = "AC97 Aux Playback",
.channels_min = 1,
{
.name = "pxa2xx-ac97-mic",
.id = 2,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.capture = {
.stream_name = "AC97 Mic Capture",
.channels_min = 1,
EXPORT_SYMBOL_GPL(pxa_ac97_dai);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
+static int __init pxa_ac97_init(void)
+{
+ return snd_soc_register_dais(pxa_ac97_dai, ARRAY_SIZE(pxa_ac97_dai));
+}
+module_init(pxa_ac97_init);
+
+static void __exit pxa_ac97_exit(void)
+{
+ snd_soc_unregister_dais(pxa_ac97_dai, ARRAY_SIZE(pxa_ac97_dai));
+}
+module_exit(pxa_ac97_exit);
+
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
MODULE_LICENSE("GPL");
},
};
-static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
+static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
return 0;
}
-static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int pxa2xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
int ret = 0;
return ret;
}
-static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream)
+static void pxa2xx_i2s_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
SACR1 |= SACR1_DRPL;
}
#ifdef CONFIG_PM
-static int pxa2xx_i2s_suspend(struct platform_device *dev,
- struct snd_soc_dai *dai)
+static int pxa2xx_i2s_suspend(struct snd_soc_dai *dai)
{
if (!dai->active)
return 0;
return 0;
}
-static int pxa2xx_i2s_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int pxa2xx_i2s_resume(struct snd_soc_dai *dai)
{
if (!dai->active)
return 0;
struct snd_soc_dai pxa_i2s_dai = {
.name = "pxa2xx-i2s",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.suspend = pxa2xx_i2s_suspend,
.resume = pxa2xx_i2s_resume,
.playback = {
.startup = pxa2xx_i2s_startup,
.shutdown = pxa2xx_i2s_shutdown,
.trigger = pxa2xx_i2s_trigger,
- .hw_params = pxa2xx_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = pxa2xx_i2s_hw_params,
.set_fmt = pxa2xx_i2s_set_dai_fmt,
.set_sysclk = pxa2xx_i2s_set_dai_sysclk,
},
static int pxa2xx_i2s_probe(struct platform_device *dev)
{
+ int ret;
+
clk_i2s = clk_get(&dev->dev, "I2SCLK");
- return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+ if (IS_ERR(clk_i2s))
+ return PTR_ERR(clk_i2s);
+
+ pxa_i2s_dai.dev = &dev->dev;
+ ret = snd_soc_register_dai(&pxa_i2s_dai);
+ if (ret != 0)
+ clk_put(clk_i2s);
+
+ return ret;
}
static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
{
+ snd_soc_unregister_dai(&pxa_i2s_dai);
clk_put(clk_i2s);
clk_i2s = ERR_PTR(-ENOENT);
return 0;
return 0;
}
-struct snd_pcm_ops pxa2xx_pcm_ops = {
+static struct snd_pcm_ops pxa2xx_pcm_ops = {
.open = __pxa2xx_pcm_open,
.close = __pxa2xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
};
EXPORT_SYMBOL_GPL(pxa2xx_soc_platform);
+static int __init pxa2xx_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&pxa2xx_soc_platform);
+}
+module_init(pxa2xx_soc_platform_init);
+
+static void __exit pxa2xx_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&pxa2xx_soc_platform);
+}
+module_exit(pxa2xx_soc_platform_exit);
+
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("Intel PXA2xx PCM DMA module");
MODULE_LICENSE("GPL");
};
/* spitz audio machine driver */
-static struct snd_soc_machine snd_soc_machine_spitz = {
+static struct snd_soc_card snd_soc_spitz = {
.name = "Spitz",
+ .platform = &pxa2xx_soc_platform,
.dai_link = &spitz_dai,
.num_links = 1,
};
/* spitz audio subsystem */
static struct snd_soc_device spitz_snd_devdata = {
- .machine = &snd_soc_machine_spitz,
- .platform = &pxa2xx_soc_platform,
+ .card = &snd_soc_spitz,
.codec_dev = &soc_codec_dev_wm8750,
.codec_data = &spitz_wm8750_setup,
};
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
-static struct snd_soc_machine tosa;
+static struct snd_soc_card tosa;
#define TOSA_HP 0
#define TOSA_MIC_INT 1
},
};
-static struct snd_soc_machine tosa = {
+static int tosa_probe(struct platform_device *dev)
+{
+ int ret;
+
+ ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack");
+ if (ret)
+ return ret;
+ ret = gpio_direction_output(TOSA_GPIO_L_MUTE, 0);
+ if (ret)
+ gpio_free(TOSA_GPIO_L_MUTE);
+
+ return ret;
+}
+
+static int tosa_remove(struct platform_device *dev)
+{
+ gpio_free(TOSA_GPIO_L_MUTE);
+ return 0;
+}
+
+static struct snd_soc_card tosa = {
.name = "Tosa",
+ .platform = &pxa2xx_soc_platform,
.dai_link = tosa_dai,
.num_links = ARRAY_SIZE(tosa_dai),
+ .probe = tosa_probe,
+ .remove = tosa_remove,
};
static struct snd_soc_device tosa_snd_devdata = {
- .machine = &tosa,
- .platform = &pxa2xx_soc_platform,
+ .card = &tosa,
.codec_dev = &soc_codec_dev_wm9712,
};
if (!machine_is_tosa())
return -ENODEV;
- ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack");
- if (ret)
- return ret;
- gpio_direction_output(TOSA_GPIO_L_MUTE, 0);
-
tosa_snd_device = platform_device_alloc("soc-audio", -1);
if (!tosa_snd_device) {
ret = -ENOMEM;
platform_device_put(tosa_snd_device);
err_alloc:
- gpio_free(TOSA_GPIO_L_MUTE);
-
return ret;
}
static void __exit tosa_exit(void)
{
platform_device_unregister(tosa_snd_device);
- gpio_free(TOSA_GPIO_L_MUTE);
}
module_init(tosa_init);
--- /dev/null
+/*
+ * zylonite.c -- SoC audio for Zylonite
+ *
+ * Copyright 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm9713.h"
+#include "pxa2xx-pcm.h"
+#include "pxa2xx-ac97.h"
+#include "pxa-ssp.h"
+
+static struct snd_soc_card zylonite;
+
+static const struct snd_soc_dapm_widget zylonite_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone", NULL),
+ SND_SOC_DAPM_MIC("Headset Microphone", NULL),
+ SND_SOC_DAPM_MIC("Handset Microphone", NULL),
+ SND_SOC_DAPM_SPK("Multiactor", NULL),
+ SND_SOC_DAPM_SPK("Headset Earpiece", NULL),
+};
+
+/* Currently supported audio map */
+static const struct snd_soc_dapm_route audio_map[] = {
+
+ /* Headphone output connected to HPL/HPR */
+ { "Headphone", NULL, "HPL" },
+ { "Headphone", NULL, "HPR" },
+
+ /* On-board earpiece */
+ { "Headset Earpiece", NULL, "OUT3" },
+
+ /* Headphone mic */
+ { "MIC2A", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "Headset Microphone" },
+
+ /* On-board mic */
+ { "MIC1", NULL, "Mic Bias" },
+ { "Mic Bias", NULL, "Handset Microphone" },
+
+ /* Multiactor differentially connected over SPKL/SPKR */
+ { "Multiactor", NULL, "SPKL" },
+ { "Multiactor", NULL, "SPKR" },
+};
+
+static int zylonite_wm9713_init(struct snd_soc_codec *codec)
+{
+ /* Currently we only support use of the AC97 clock here. If
+ * CLK_POUT is selected by SW15 then the clock API will need
+ * to be used to request and enable it here.
+ */
+
+ snd_soc_dapm_new_controls(codec, zylonite_dapm_widgets,
+ ARRAY_SIZE(zylonite_dapm_widgets));
+
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ /* Static setup for now */
+ snd_soc_dapm_enable_pin(codec, "Headphone");
+ snd_soc_dapm_enable_pin(codec, "Headset Earpiece");
+
+ snd_soc_dapm_sync(codec);
+ return 0;
+}
+
+static int zylonite_voice_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int pll_out = 0;
+ unsigned int acds = 0;
+ unsigned int wm9713_div = 0;
+ int ret = 0;
+
+ switch (params_rate(params)) {
+ case 8000:
+ wm9713_div = 12;
+ pll_out = 2048000;
+ break;
+ case 16000:
+ wm9713_div = 6;
+ pll_out = 4096000;
+ break;
+ case 48000:
+ default:
+ wm9713_div = 2;
+ pll_out = 12288000;
+ acds = 1;
+ break;
+ }
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_tdm_slot(cpu_dai,
+ params_channels(params),
+ params_channels(params));
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_pll(cpu_dai, 0, 0, pll_out);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, PXA_SSP_AUDIO_DIV_ACDS, acds);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai, PXA_SSP_CLK_AUDIO, 0, 1);
+ if (ret < 0)
+ return ret;
+
+ /* Note that if the PLL is in use the WM9713_PCMCLK_PLL_DIV needs
+ * to be set instead.
+ */
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM9713_PCMCLK_DIV,
+ WM9713_PCMDIV(wm9713_div));
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops zylonite_voice_ops = {
+ .hw_params = zylonite_voice_hw_params,
+};
+
+static struct snd_soc_dai_link zylonite_dai[] = {
+{
+ .name = "AC97",
+ .stream_name = "AC97 HiFi",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI],
+ .codec_dai = &wm9713_dai[WM9713_DAI_AC97_HIFI],
+ .init = zylonite_wm9713_init,
+},
+{
+ .name = "AC97 Aux",
+ .stream_name = "AC97 Aux",
+ .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX],
+ .codec_dai = &wm9713_dai[WM9713_DAI_AC97_AUX],
+},
+{
+ .name = "WM9713 Voice",
+ .stream_name = "WM9713 Voice",
+ .cpu_dai = &pxa_ssp_dai[PXA_DAI_SSP3],
+ .codec_dai = &wm9713_dai[WM9713_DAI_PCM_VOICE],
+ .ops = &zylonite_voice_ops,
+},
+};
+
+static struct snd_soc_card zylonite = {
+ .name = "Zylonite",
+ .platform = &pxa2xx_soc_platform,
+ .dai_link = zylonite_dai,
+ .num_links = ARRAY_SIZE(zylonite_dai),
+};
+
+static struct snd_soc_device zylonite_snd_ac97_devdata = {
+ .card = &zylonite,
+ .codec_dev = &soc_codec_dev_wm9713,
+};
+
+static struct platform_device *zylonite_snd_ac97_device;
+
+static int __init zylonite_init(void)
+{
+ int ret;
+
+ zylonite_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+ if (!zylonite_snd_ac97_device)
+ return -ENOMEM;
+
+ platform_set_drvdata(zylonite_snd_ac97_device,
+ &zylonite_snd_ac97_devdata);
+ zylonite_snd_ac97_devdata.dev = &zylonite_snd_ac97_device->dev;
+
+ ret = platform_device_add(zylonite_snd_ac97_device);
+ if (ret != 0)
+ platform_device_put(zylonite_snd_ac97_device);
+
+ return ret;
+}
+
+static void __exit zylonite_exit(void)
+{
+ platform_device_unregister(zylonite_snd_ac97_device);
+}
+
+module_init(zylonite_init);
+module_exit(zylonite_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("ALSA SoC WM9713 Zylonite");
+MODULE_LICENSE("GPL");
Say Y if you want to add support for SoC audio on ln2440sbc
with the ALC650.
+config SND_S3C24XX_SOC_S3C24XX_UDA134X
+ tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
+ depends on SND_S3C24XX_SOC
+ select SND_S3C24XX_SOC_I2S
+ select SND_SOC_UDA134X
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
+snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
+obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
#include "s3c24xx-pcm.h"
#include "s3c24xx-ac97.h"
-static struct snd_soc_machine ln2440sbc;
+static struct snd_soc_card ln2440sbc;
static struct snd_soc_dai_link ln2440sbc_dai[] = {
{
},
};
-static struct snd_soc_machine ln2440sbc = {
+static struct snd_soc_card ln2440sbc = {
.name = "LN2440SBC",
+ .platform = &s3c24xx_soc_platform,
.dai_link = ln2440sbc_dai,
.num_links = ARRAY_SIZE(ln2440sbc_dai),
};
static struct snd_soc_device ln2440sbc_snd_ac97_devdata = {
- .machine = &ln2440sbc,
- .platform = &s3c24xx_soc_platform,
+ .card = &ln2440sbc,
.codec_dev = &soc_codec_dev_ac97,
};
#define NEO_CAPTURE_HEADSET 7
#define NEO_CAPTURE_BLUETOOTH 8
-static struct snd_soc_machine neo1973;
+static struct snd_soc_card neo1973;
static struct i2c_client *i2c;
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
static struct snd_soc_dai bt_dai = {
.name = "Bluetooth",
.id = 0,
- .type = SND_SOC_DAI_PCM,
.playback = {
.channels_min = 1,
.channels_max = 1,
},
};
-static struct snd_soc_machine neo1973 = {
+static struct snd_soc_card neo1973 = {
.name = "neo1973",
+ .platform = &s3c24xx_soc_platform,
.dai_link = neo1973_dai,
.num_links = ARRAY_SIZE(neo1973_dai),
};
};
static struct snd_soc_device neo1973_snd_devdata = {
- .machine = &neo1973,
- .platform = &s3c24xx_soc_platform,
+ .card = &neo1973,
.codec_dev = &soc_codec_dev_wm8753,
.codec_data = &neo1973_wm8753_setup,
};
}
static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
u32 iismod;
return 0;
}
-static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int s3c2412_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
int capture = (substream->stream == SNDRV_PCM_STREAM_CAPTURE);
unsigned long irqs;
}
#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct platform_device *dev,
- struct snd_soc_dai *dai)
+static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
{
struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
u32 iismod;
iismod = readl(i2s->regs + S3C2412_IISMOD);
if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
- dev_warn(&dev->dev, "%s: RXDMA active?\n", __func__);
+ pr_warning("%s: RXDMA active?\n", __func__);
if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
- dev_warn(&dev->dev, "%s: TXDMA active?\n", __func__);
+ pr_warning("%s: TXDMA active?\n", __func__);
if (iismod & S3C2412_IISCON_IIS_ACTIVE)
- dev_warn(&dev->dev, "%s: IIS active\n", __func__);
+ pr_warning("%s: IIS active\n", __func__);
}
return 0;
}
-static int s3c2412_i2s_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
{
struct s3c2412_i2s_info *i2s = &s3c2412_i2s;
- dev_info(&pdev->dev, "dai_active %d, IISMOD %08x, IISCON %08x\n",
- dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+ pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
+ dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
if (dai->active) {
writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
struct snd_soc_dai s3c2412_i2s_dai = {
.name = "s3c2412-i2s",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.probe = s3c2412_i2s_probe,
.suspend = s3c2412_i2s_suspend,
.resume = s3c2412_i2s_resume,
.ops = {
.trigger = s3c2412_i2s_trigger,
.hw_params = s3c2412_i2s_hw_params,
- },
- .dai_ops = {
.set_fmt = s3c2412_i2s_set_fmt,
.set_clkdiv = s3c2412_i2s_set_clkdiv,
.set_sysclk = s3c2412_i2s_set_sysclk,
};
EXPORT_SYMBOL_GPL(s3c2412_i2s_dai);
+static int __init s3c2412_i2s_init(void)
+{
+ return snd_soc_register_dai(&s3c2412_i2s_dai);
+}
+module_init(s3c2412_i2s_init);
+
+static void __exit s3c2412_i2s_exit(void)
+{
+ snd_soc_unregister_dai(&s3c2412_i2s_dai);
+}
+module_exit(s3c2412_i2s_exit);
+
+
/* Module information */
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_DESCRIPTION("S3C2412 I2S SoC Interface");
}
static int s3c2443_ac97_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
return 0;
}
-static int s3c2443_ac97_trigger(struct snd_pcm_substream *substream, int cmd)
+static int s3c2443_ac97_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
}
static int s3c2443_ac97_hw_mic_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
}
static int s3c2443_ac97_mic_trigger(struct snd_pcm_substream *substream,
- int cmd)
+ int cmd, struct snd_soc_dai *dai)
{
u32 ac_glbctrl;
{
.name = "s3c2443-ac97",
.id = 0,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.probe = s3c2443_ac97_probe,
.remove = s3c2443_ac97_remove,
.playback = {
{
.name = "pxa2xx-ac97-mic",
.id = 1,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.capture = {
.stream_name = "AC97 Mic Capture",
.channels_min = 1,
EXPORT_SYMBOL_GPL(s3c2443_ac97_dai);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
+static int __init s3c2443_ac97_init(void)
+{
+ return snd_soc_register_dais(s3c2443_ac97_dai,
+ ARRAY_SIZE(s3c2443_ac97_dai));
+}
+module_init(s3c2443_ac97_init);
+
+static void __exit s3c2443_ac97_exit(void)
+{
+ snd_soc_unregister_dais(s3c2443_ac97_dai,
+ ARRAY_SIZE(s3c2443_ac97_dai));
+}
+module_exit(s3c2443_ac97_exit);
+
+
MODULE_AUTHOR("Graeme Gregory");
MODULE_DESCRIPTION("AC97 driver for the Samsung s3c2443 chip");
MODULE_LICENSE("GPL");
}
static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
u32 iismod;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
+ iismod &= ~S3C2410_IISMOD_16BIT;
+ ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->dma_size = 1;
break;
case SNDRV_PCM_FORMAT_S16_LE:
iismod |= S3C2410_IISMOD_16BIT;
+ ((struct s3c24xx_pcm_dma_params *)
+ rtd->dai->cpu_dai->dma_data)->dma_size = 2;
break;
+ default:
+ return -EINVAL;
}
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
return 0;
}
-static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd)
+static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
int ret = 0;
}
#ifdef CONFIG_PM
-static int s3c24xx_i2s_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
+static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
{
DBG("Entered %s\n", __func__);
return 0;
}
-static int s3c24xx_i2s_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
+static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
{
DBG("Entered %s\n", __func__);
clk_enable(s3c24xx_i2s.iis_clk);
struct snd_soc_dai s3c24xx_i2s_dai = {
.name = "s3c24xx-i2s",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.probe = s3c24xx_i2s_probe,
.suspend = s3c24xx_i2s_suspend,
.resume = s3c24xx_i2s_resume,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
.trigger = s3c24xx_i2s_trigger,
- .hw_params = s3c24xx_i2s_hw_params,},
- .dai_ops = {
+ .hw_params = s3c24xx_i2s_hw_params,
.set_fmt = s3c24xx_i2s_set_fmt,
.set_clkdiv = s3c24xx_i2s_set_clkdiv,
.set_sysclk = s3c24xx_i2s_set_sysclk,
};
EXPORT_SYMBOL_GPL(s3c24xx_i2s_dai);
+static int __init s3c24xx_i2s_init(void)
+{
+ return snd_soc_register_dai(&s3c24xx_i2s_dai);
+}
+module_init(s3c24xx_i2s_init);
+
+static void __exit s3c24xx_i2s_exit(void)
+{
+ snd_soc_unregister_dai(&s3c24xx_i2s_dai);
+}
+module_exit(s3c24xx_i2s_exit);
+
/* Module information */
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
};
EXPORT_SYMBOL_GPL(s3c24xx_soc_platform);
+static int __init s3c24xx_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&s3c24xx_soc_platform);
+}
+module_init(s3c24xx_soc_platform_init);
+
+static void __exit s3c24xx_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&s3c24xx_soc_platform);
+}
+module_exit(s3c24xx_soc_platform_exit);
+
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_DESCRIPTION("Samsung S3C24XX PCM DMA module");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Modifications by Christian Pellegrin <chripell@evolware.org>
+ *
+ * s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+#include <sound/s3c24xx_uda134x.h>
+#include <sound/uda134x.h>
+
+#include <asm/plat-s3c24xx/regs-iis.h>
+
+#include "s3c24xx-pcm.h"
+#include "s3c24xx-i2s.h"
+#include "../codecs/uda134x.h"
+
+
+/* #define ENFORCE_RATES 1 */
+/*
+ Unfortunately the S3C24XX in master mode has a limited capacity of
+ generating the clock for the codec. If you define this only rates
+ that are really available will be enforced. But be careful, most
+ user level application just want the usual sampling frequencies (8,
+ 11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
+ operation for embedded systems. So if you aren't very lucky or your
+ hardware engineer wasn't very forward-looking it's better to leave
+ this undefined. If you do so an approximate value for the requested
+ sampling rate in the range -/+ 5% will be chosen. If this in not
+ possible an error will be returned.
+*/
+
+static struct clk *xtal;
+static struct clk *pclk;
+/* this is need because we don't have a place where to keep the
+ * pointers to the clocks in each substream. We get the clocks only
+ * when we are actually using them so we don't block stuff like
+ * frequency change or oscillator power-off */
+static int clk_users;
+static DEFINE_MUTEX(clk_lock);
+
+static unsigned int rates[33 * 2];
+#ifdef ENFORCE_RATES
+static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
+ .count = ARRAY_SIZE(rates),
+ .list = rates,
+ .mask = 0,
+};
+#endif
+
+static struct platform_device *s3c24xx_uda134x_snd_device;
+
+static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
+{
+ int ret = 0;
+#ifdef ENFORCE_RATES
+ struct snd_pcm_runtime *runtime = substream->runtime;;
+#endif
+
+ mutex_lock(&clk_lock);
+ pr_debug("%s %d\n", __func__, clk_users);
+ if (clk_users == 0) {
+ xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
+ if (!xtal) {
+ printk(KERN_ERR "%s cannot get xtal\n", __func__);
+ ret = -EBUSY;
+ } else {
+ pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
+ "pclk");
+ if (!pclk) {
+ printk(KERN_ERR "%s cannot get pclk\n",
+ __func__);
+ clk_put(xtal);
+ ret = -EBUSY;
+ }
+ }
+ if (!ret) {
+ int i, j;
+
+ for (i = 0; i < 2; i++) {
+ int fs = i ? 256 : 384;
+
+ rates[i*33] = clk_get_rate(xtal) / fs;
+ for (j = 1; j < 33; j++)
+ rates[i*33 + j] = clk_get_rate(pclk) /
+ (j * fs);
+ }
+ }
+ }
+ clk_users += 1;
+ mutex_unlock(&clk_lock);
+ if (!ret) {
+#ifdef ENFORCE_RATES
+ ret = snd_pcm_hw_constraint_list(runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &hw_constraints_rates);
+ if (ret < 0)
+ printk(KERN_ERR "%s cannot set constraints\n",
+ __func__);
+#endif
+ }
+ return ret;
+}
+
+static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
+{
+ mutex_lock(&clk_lock);
+ pr_debug("%s %d\n", __func__, clk_users);
+ clk_users -= 1;
+ if (clk_users == 0) {
+ clk_put(xtal);
+ xtal = NULL;
+ clk_put(pclk);
+ pclk = NULL;
+ }
+ mutex_unlock(&clk_lock);
+}
+
+static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ unsigned int clk = 0;
+ int ret = 0;
+ int clk_source, fs_mode;
+ unsigned long rate = params_rate(params);
+ long err, cerr;
+ unsigned int div;
+ int i, bi;
+
+ err = 999999;
+ bi = 0;
+ for (i = 0; i < 2*33; i++) {
+ cerr = rates[i] - rate;
+ if (cerr < 0)
+ cerr = -cerr;
+ if (cerr < err) {
+ err = cerr;
+ bi = i;
+ }
+ }
+ if (bi / 33 == 1)
+ fs_mode = S3C2410_IISMOD_256FS;
+ else
+ fs_mode = S3C2410_IISMOD_384FS;
+ if (bi % 33 == 0) {
+ clk_source = S3C24XX_CLKSRC_MPLL;
+ div = 1;
+ } else {
+ clk_source = S3C24XX_CLKSRC_PCLK;
+ div = bi % 33;
+ }
+ pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
+
+ clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
+ pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
+ fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
+ clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
+ div, clk, err);
+
+ if ((err * 100 / rate) > 5) {
+ printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
+ "too different from desired (%ld%%)\n",
+ err * 100 / rate);
+ return -EINVAL;
+ }
+
+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
+ SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
+ SND_SOC_CLOCK_IN);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
+ S3C2410_IISMOD_32FS);
+ if (ret < 0)
+ return ret;
+
+ ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
+ S3C24XX_PRESCALE(div, div));
+ if (ret < 0)
+ return ret;
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
+ SND_SOC_CLOCK_OUT);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct snd_soc_ops s3c24xx_uda134x_ops = {
+ .startup = s3c24xx_uda134x_startup,
+ .shutdown = s3c24xx_uda134x_shutdown,
+ .hw_params = s3c24xx_uda134x_hw_params,
+};
+
+static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
+ .name = "UDA134X",
+ .stream_name = "UDA134X",
+ .codec_dai = &uda134x_dai,
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .ops = &s3c24xx_uda134x_ops,
+};
+
+static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
+ .name = "S3C24XX_UDA134X",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = &s3c24xx_uda134x_dai_link,
+ .num_links = 1,
+};
+
+static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
+
+static void setdat(int v)
+{
+ gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
+}
+
+static void setclk(int v)
+{
+ gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
+}
+
+static void setmode(int v)
+{
+ gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
+}
+
+static struct uda134x_platform_data s3c24xx_uda134x = {
+ .l3 = {
+ .setdat = setdat,
+ .setclk = setclk,
+ .setmode = setmode,
+ .data_hold = 1,
+ .data_setup = 1,
+ .clock_high = 1,
+ .mode_hold = 1,
+ .mode = 1,
+ .mode_setup = 1,
+ },
+};
+
+static struct snd_soc_device s3c24xx_uda134x_snd_devdata = {
+ .card = &snd_soc_s3c24xx_uda134x,
+ .codec_dev = &soc_codec_dev_uda134x,
+ .codec_data = &s3c24xx_uda134x,
+};
+
+static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
+{
+ if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
+ printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+ "l3 %s pin already in use", fun);
+ return -EBUSY;
+ }
+ gpio_direction_output(pin, 0);
+ return 0;
+}
+
+static int s3c24xx_uda134x_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
+
+ s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
+ if (s3c24xx_uda134x_l3_pins == NULL) {
+ printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+ "unable to find platform data\n");
+ return -ENODEV;
+ }
+ s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
+ s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
+
+ if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
+ "data") < 0)
+ return -EBUSY;
+ if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
+ "clk") < 0) {
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+ return -EBUSY;
+ }
+ if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
+ "mode") < 0) {
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+ return -EBUSY;
+ }
+
+ s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
+ if (!s3c24xx_uda134x_snd_device) {
+ printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
+ "Unable to register\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(s3c24xx_uda134x_snd_device,
+ &s3c24xx_uda134x_snd_devdata);
+ s3c24xx_uda134x_snd_devdata.dev = &s3c24xx_uda134x_snd_device->dev;
+ ret = platform_device_add(s3c24xx_uda134x_snd_device);
+ if (ret) {
+ printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
+ platform_device_put(s3c24xx_uda134x_snd_device);
+ }
+
+ return ret;
+}
+
+static int s3c24xx_uda134x_remove(struct platform_device *pdev)
+{
+ platform_device_unregister(s3c24xx_uda134x_snd_device);
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
+ gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
+ return 0;
+}
+
+static struct platform_driver s3c24xx_uda134x_driver = {
+ .probe = s3c24xx_uda134x_probe,
+ .remove = s3c24xx_uda134x_remove,
+ .driver = {
+ .name = "s3c24xx_uda134x",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init s3c24xx_uda134x_init(void)
+{
+ return platform_driver_register(&s3c24xx_uda134x_driver);
+}
+
+static void __exit s3c24xx_uda134x_exit(void)
+{
+ platform_driver_unregister(&s3c24xx_uda134x_driver);
+}
+
+
+module_init(s3c24xx_uda134x_init);
+module_exit(s3c24xx_uda134x_exit);
+
+MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
+MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
+MODULE_LICENSE("GPL");
#include "s3c24xx-pcm.h"
#include "s3c24xx-ac97.h"
-static struct snd_soc_machine smdk2443;
+static struct snd_soc_card smdk2443;
static struct snd_soc_dai_link smdk2443_dai[] = {
{
},
};
-static struct snd_soc_machine smdk2443 = {
+static struct snd_soc_card smdk2443 = {
.name = "SMDK2443",
+ .platform = &s3c24xx_soc_platform,
.dai_link = smdk2443_dai,
.num_links = ARRAY_SIZE(smdk2443_dai),
};
static struct snd_soc_device smdk2443_snd_ac97_devdata = {
- .machine = &smdk2443,
- .platform = &s3c24xx_soc_platform,
+ .card = &smdk2443,
.codec_dev = &soc_codec_dev_ac97,
};
};
EXPORT_SYMBOL_GPL(sh7760_soc_platform);
+static int __init sh7760_soc_platform_init(void)
+{
+ return snd_soc_register_platform(&sh7760_soc_platform);
+}
+module_init(sh7760_soc_platform_init);
+
+static void __exit sh7760_soc_platform_exit(void)
+{
+ snd_soc_unregister_platform(&sh7760_soc_platform);
+}
+module_exit(sh7760_soc_platform_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SH7760 Audio DMA (DMABRG) driver");
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
EXPORT_SYMBOL_GPL(soc_ac97_ops);
static int hac_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct hac_priv *hac = &hac_cpu_data[rtd->dai->cpu_dai->id];
{
.name = "HAC0",
.id = 0,
- .type = SND_SOC_DAI_AC97,
+ .ac97_control = 1,
.playback = {
.rates = AC97_RATES,
.formats = AC97_FMTS,
#ifdef CONFIG_CPU_SUBTYPE_SH7760
{
.name = "HAC1",
+ .ac97_control = 1,
.id = 1,
- .type = SND_SOC_DAI_AC97,
.playback = {
.rates = AC97_RATES,
.formats = AC97_FMTS,
};
EXPORT_SYMBOL_GPL(sh4_hac_dai);
+static int __init sh4_hac_init(void)
+{
+ return snd_soc_register_dais(sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
+}
+module_init(sh4_hac_init);
+
+static void __exit sh4_hac_exit(void)
+{
+ snd_soc_unregister_dais(sh4_hac_dai, ARRAY_SIZE(sh4_hac_dai));
+}
+module_exit(sh4_hac_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SuperH onchip HAC (AC97) audio driver");
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
.ops = NULL,
};
-static struct snd_soc_machine sh7760_ac97_soc_machine = {
+static struct snd_soc_card sh7760_ac97_soc_machine = {
.name = "SH7760 AC97",
+ .platform = &sh7760_soc_platform,
.dai_link = &sh7760_ac97_dai,
.num_links = 1,
};
static struct snd_soc_device sh7760_ac97_snd_devdata = {
- .machine = &sh7760_ac97_soc_machine,
- .platform = &sh7760_soc_platform,
+ .card = &sh7760_ac97_soc_machine,
.codec_dev = &soc_codec_dev_ac97,
};
* track usage of the SSI; it is simplex-only so prevent attempts of
* concurrent playback + capture. FIXME: any locking required?
*/
-static int ssi_startup(struct snd_pcm_substream *substream)
+static int ssi_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
return 0;
}
-static void ssi_shutdown(struct snd_pcm_substream *substream)
+static void ssi_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
ssi->inuse = 0;
}
-static int ssi_trigger(struct snd_pcm_substream *substream, int cmd)
+static int ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
}
static int ssi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct ssi_priv *ssi = &ssi_cpu_data[rtd->dai->cpu_dai->id];
{
.name = "SSI0",
.id = 0,
- .type = SND_SOC_DAI_I2S,
.playback = {
.rates = SSI_RATES,
.formats = SSI_FMTS,
.shutdown = ssi_shutdown,
.trigger = ssi_trigger,
.hw_params = ssi_hw_params,
- },
- .dai_ops = {
.set_sysclk = ssi_set_sysclk,
.set_clkdiv = ssi_set_clkdiv,
.set_fmt = ssi_set_fmt,
{
.name = "SSI1",
.id = 1,
- .type = SND_SOC_DAI_I2S,
.playback = {
.rates = SSI_RATES,
.formats = SSI_FMTS,
.shutdown = ssi_shutdown,
.trigger = ssi_trigger,
.hw_params = ssi_hw_params,
- },
- .dai_ops = {
.set_sysclk = ssi_set_sysclk,
.set_clkdiv = ssi_set_clkdiv,
.set_fmt = ssi_set_fmt,
};
EXPORT_SYMBOL_GPL(sh4_ssi_dai);
+static int __init sh4_ssi_init(void)
+{
+ return snd_soc_register_dais(sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
+}
+module_init(sh4_ssi_init);
+
+static void __exit sh4_ssi_exit(void)
+{
+ snd_soc_unregister_dais(sh4_ssi_dai, ARRAY_SIZE(sh4_ssi_dai));
+}
+module_exit(sh4_ssi_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("SuperH onchip SSI (I2S) audio driver");
MODULE_AUTHOR("Manuel Lauss <mano@roarinelk.homelinux.net>");
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/bitops.h>
+#include <linux/debugfs.h>
#include <linux/platform_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
-/* debug */
-#define SOC_DEBUG 0
-#if SOC_DEBUG
-#define dbg(format, arg...) printk(format, ## arg)
-#else
-#define dbg(format, arg...)
-#endif
-
static DEFINE_MUTEX(pcm_mutex);
static DEFINE_MUTEX(io_mutex);
static DECLARE_WAIT_QUEUE_HEAD(soc_pm_waitq);
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *debugfs_root;
+#endif
+
+static DEFINE_MUTEX(client_mutex);
+static LIST_HEAD(card_list);
+static LIST_HEAD(dai_list);
+static LIST_HEAD(platform_list);
+static LIST_HEAD(codec_list);
+
+static int snd_soc_register_card(struct snd_soc_card *card);
+static int snd_soc_unregister_card(struct snd_soc_card *card);
+
/*
* This is a timeout to do a DAPM powerdown after a stream is closed().
* It can be used to eliminate pops between different playback streams, e.g.
}
#endif
-static inline const char *get_dai_name(int type)
-{
- switch (type) {
- case SND_SOC_DAI_AC97_BUS:
- case SND_SOC_DAI_AC97:
- return "AC97";
- case SND_SOC_DAI_I2S:
- return "I2S";
- case SND_SOC_DAI_PCM:
- return "PCM";
- }
- return NULL;
-}
-
/*
* Called by ALSA when a PCM substream is opened, the runtime->hw record is
* then initialized and any private data can be allocated. This also calls
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_card *card = socdev->card;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
int ret = 0;
/* startup the audio subsystem */
if (cpu_dai->ops.startup) {
- ret = cpu_dai->ops.startup(substream);
+ ret = cpu_dai->ops.startup(substream, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't open interface %s\n",
cpu_dai->name);
}
if (codec_dai->ops.startup) {
- ret = codec_dai->ops.startup(substream);
+ ret = codec_dai->ops.startup(substream, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't open codec %s\n",
codec_dai->name);
goto machine_err;
}
- dbg("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
- dbg("asoc: rate mask 0x%x\n", runtime->hw.rates);
- dbg("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
- runtime->hw.channels_max);
- dbg("asoc: min rate %d max rate %d\n", runtime->hw.rate_min,
- runtime->hw.rate_max);
+ pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name);
+ pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates);
+ pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
+ runtime->hw.channels_max);
+ pr_debug("asoc: min rate %d max rate %d\n", runtime->hw.rate_min,
+ runtime->hw.rate_max);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
cpu_dai->playback.active = codec_dai->playback.active = 1;
platform_err:
if (cpu_dai->ops.shutdown)
- cpu_dai->ops.shutdown(substream);
+ cpu_dai->ops.shutdown(substream, cpu_dai);
out:
mutex_unlock(&pcm_mutex);
return ret;
*/
static void close_delayed_work(struct work_struct *work)
{
- struct snd_soc_device *socdev =
- container_of(work, struct snd_soc_device, delayed_work.work);
+ struct snd_soc_card *card = container_of(work, struct snd_soc_card,
+ delayed_work.work);
+ struct snd_soc_device *socdev = card->socdev;
struct snd_soc_codec *codec = socdev->codec;
struct snd_soc_dai *codec_dai;
int i;
for (i = 0; i < codec->num_dai; i++) {
codec_dai = &codec->dai[i];
- dbg("pop wq checking: %s status: %s waiting: %s\n",
- codec_dai->playback.stream_name,
- codec_dai->playback.active ? "active" : "inactive",
- codec_dai->pop_wait ? "yes" : "no");
+ pr_debug("pop wq checking: %s status: %s waiting: %s\n",
+ codec_dai->playback.stream_name,
+ codec_dai->playback.active ? "active" : "inactive",
+ codec_dai->pop_wait ? "yes" : "no");
/* are we waiting on this codec DAI stream */
if (codec_dai->pop_wait == 1) {
/* Reduce power if no longer active */
if (codec->active == 0) {
- dbg("pop wq D1 %s %s\n", codec->name,
- codec_dai->playback.stream_name);
+ pr_debug("pop wq D1 %s %s\n", codec->name,
+ codec_dai->playback.stream_name);
snd_soc_dapm_set_bias_level(socdev,
SND_SOC_BIAS_PREPARE);
}
/* Fall into standby if no longer active */
if (codec->active == 0) {
- dbg("pop wq D3 %s %s\n", codec->name,
- codec_dai->playback.stream_name);
+ pr_debug("pop wq D3 %s %s\n", codec->name,
+ codec_dai->playback.stream_name);
snd_soc_dapm_set_bias_level(socdev,
SND_SOC_BIAS_STANDBY);
}
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_card *card = socdev->card;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
struct snd_soc_codec *codec = socdev->codec;
snd_soc_dai_digital_mute(codec_dai, 1);
if (cpu_dai->ops.shutdown)
- cpu_dai->ops.shutdown(substream);
+ cpu_dai->ops.shutdown(substream, cpu_dai);
if (codec_dai->ops.shutdown)
- codec_dai->ops.shutdown(substream);
+ codec_dai->ops.shutdown(substream, codec_dai);
if (machine->ops && machine->ops->shutdown)
machine->ops->shutdown(substream);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* start delayed pop wq here for playback streams */
codec_dai->pop_wait = 1;
- schedule_delayed_work(&socdev->delayed_work,
+ schedule_delayed_work(&card->delayed_work,
msecs_to_jiffies(pmdown_time));
} else {
/* capture streams can be powered down now */
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_card *card = socdev->card;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
struct snd_soc_codec *codec = socdev->codec;
}
if (codec_dai->ops.prepare) {
- ret = codec_dai->ops.prepare(substream);
+ ret = codec_dai->ops.prepare(substream, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: codec DAI prepare error\n");
goto out;
}
if (cpu_dai->ops.prepare) {
- ret = cpu_dai->ops.prepare(substream);
+ ret = cpu_dai->ops.prepare(substream, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: cpu DAI prepare error\n");
goto out;
}
}
- /* we only want to start a DAPM playback stream if we are not waiting
- * on an existing one stopping */
- if (codec_dai->pop_wait) {
- /* we are waiting for the delayed work to start */
- if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
- snd_soc_dapm_stream_event(socdev->codec,
- codec_dai->capture.stream_name,
- SND_SOC_DAPM_STREAM_START);
- else {
- codec_dai->pop_wait = 0;
- cancel_delayed_work(&socdev->delayed_work);
- snd_soc_dai_digital_mute(codec_dai, 0);
- }
- } else {
- /* no delayed work - do we need to power up codec */
- if (codec->bias_level != SND_SOC_BIAS_ON) {
+ /* cancel any delayed stream shutdown that is pending */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
+ codec_dai->pop_wait) {
+ codec_dai->pop_wait = 0;
+ cancel_delayed_work(&card->delayed_work);
+ }
- snd_soc_dapm_set_bias_level(socdev,
- SND_SOC_BIAS_PREPARE);
+ /* do we need to power up codec */
+ if (codec->bias_level != SND_SOC_BIAS_ON) {
+ snd_soc_dapm_set_bias_level(socdev,
+ SND_SOC_BIAS_PREPARE);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- snd_soc_dapm_stream_event(codec,
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ snd_soc_dapm_stream_event(codec,
codec_dai->playback.stream_name,
SND_SOC_DAPM_STREAM_START);
- else
- snd_soc_dapm_stream_event(codec,
+ else
+ snd_soc_dapm_stream_event(codec,
codec_dai->capture.stream_name,
SND_SOC_DAPM_STREAM_START);
- snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON);
- snd_soc_dai_digital_mute(codec_dai, 0);
+ snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON);
+ snd_soc_dai_digital_mute(codec_dai, 0);
- } else {
- /* codec already powered - power on widgets */
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- snd_soc_dapm_stream_event(codec,
+ } else {
+ /* codec already powered - power on widgets */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ snd_soc_dapm_stream_event(codec,
codec_dai->playback.stream_name,
SND_SOC_DAPM_STREAM_START);
- else
- snd_soc_dapm_stream_event(codec,
+ else
+ snd_soc_dapm_stream_event(codec,
codec_dai->capture.stream_name,
SND_SOC_DAPM_STREAM_START);
- snd_soc_dai_digital_mute(codec_dai, 0);
- }
+ snd_soc_dai_digital_mute(codec_dai, 0);
}
out:
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
int ret = 0;
}
if (codec_dai->ops.hw_params) {
- ret = codec_dai->ops.hw_params(substream, params);
+ ret = codec_dai->ops.hw_params(substream, params, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't set codec %s hw params\n",
codec_dai->name);
}
if (cpu_dai->ops.hw_params) {
- ret = cpu_dai->ops.hw_params(substream, params);
+ ret = cpu_dai->ops.hw_params(substream, params, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: interface %s hw params failed\n",
cpu_dai->name);
platform_err:
if (cpu_dai->ops.hw_free)
- cpu_dai->ops.hw_free(substream);
+ cpu_dai->ops.hw_free(substream, cpu_dai);
interface_err:
if (codec_dai->ops.hw_free)
- codec_dai->ops.hw_free(substream);
+ codec_dai->ops.hw_free(substream, codec_dai);
codec_err:
if (machine->ops && machine->ops->hw_free)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
struct snd_soc_codec *codec = socdev->codec;
/* now free hw params for the DAI's */
if (codec_dai->ops.hw_free)
- codec_dai->ops.hw_free(substream);
+ codec_dai->ops.hw_free(substream, codec_dai);
if (cpu_dai->ops.hw_free)
- cpu_dai->ops.hw_free(substream);
+ cpu_dai->ops.hw_free(substream, cpu_dai);
mutex_unlock(&pcm_mutex);
return 0;
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
+ struct snd_soc_card *card= socdev->card;
struct snd_soc_dai_link *machine = rtd->dai;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *cpu_dai = machine->cpu_dai;
struct snd_soc_dai *codec_dai = machine->codec_dai;
int ret;
if (codec_dai->ops.trigger) {
- ret = codec_dai->ops.trigger(substream, cmd);
+ ret = codec_dai->ops.trigger(substream, cmd, codec_dai);
if (ret < 0)
return ret;
}
}
if (cpu_dai->ops.trigger) {
- ret = cpu_dai->ops.trigger(substream, cmd);
+ ret = cpu_dai->ops.trigger(substream, cmd, cpu_dai);
if (ret < 0)
return ret;
}
static int soc_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
struct snd_soc_codec *codec = socdev->codec;
int i;
snd_power_change_state(codec->card, SNDRV_CTL_POWER_D3hot);
/* mute any active DAC's */
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *dai = machine->dai_link[i].codec_dai;
- if (dai->dai_ops.digital_mute && dai->playback.active)
- dai->dai_ops.digital_mute(dai, 1);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *dai = card->dai_link[i].codec_dai;
+ if (dai->ops.digital_mute && dai->playback.active)
+ dai->ops.digital_mute(dai, 1);
}
/* suspend all pcms */
- for (i = 0; i < machine->num_links; i++)
- snd_pcm_suspend_all(machine->dai_link[i].pcm);
+ for (i = 0; i < card->num_links; i++)
+ snd_pcm_suspend_all(card->dai_link[i].pcm);
- if (machine->suspend_pre)
- machine->suspend_pre(pdev, state);
+ if (card->suspend_pre)
+ card->suspend_pre(pdev, state);
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
- if (cpu_dai->suspend && cpu_dai->type != SND_SOC_DAI_AC97)
- cpu_dai->suspend(pdev, cpu_dai);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
+ if (cpu_dai->suspend && !cpu_dai->ac97_control)
+ cpu_dai->suspend(cpu_dai);
if (platform->suspend)
- platform->suspend(pdev, cpu_dai);
+ platform->suspend(cpu_dai);
}
/* close any waiting streams and save state */
- run_delayed_work(&socdev->delayed_work);
+ run_delayed_work(&card->delayed_work);
codec->suspend_bias_level = codec->bias_level;
for (i = 0; i < codec->num_dai; i++) {
if (codec_dev->suspend)
codec_dev->suspend(pdev, state);
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
- if (cpu_dai->suspend && cpu_dai->type == SND_SOC_DAI_AC97)
- cpu_dai->suspend(pdev, cpu_dai);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
+ if (cpu_dai->suspend && cpu_dai->ac97_control)
+ cpu_dai->suspend(cpu_dai);
}
- if (machine->suspend_post)
- machine->suspend_post(pdev, state);
+ if (card->suspend_post)
+ card->suspend_post(pdev, state);
return 0;
}
*/
static void soc_resume_deferred(struct work_struct *work)
{
- struct snd_soc_device *socdev = container_of(work,
- struct snd_soc_device,
- deferred_resume_work);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_card *card = container_of(work,
+ struct snd_soc_card,
+ deferred_resume_work);
+ struct snd_soc_device *socdev = card->socdev;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
struct snd_soc_codec *codec = socdev->codec;
struct platform_device *pdev = to_platform_device(socdev->dev);
* so userspace apps are blocked from touching us
*/
- dev_info(socdev->dev, "starting resume work\n");
+ dev_dbg(socdev->dev, "starting resume work\n");
- if (machine->resume_pre)
- machine->resume_pre(pdev);
+ if (card->resume_pre)
+ card->resume_pre(pdev);
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
- if (cpu_dai->resume && cpu_dai->type == SND_SOC_DAI_AC97)
- cpu_dai->resume(pdev, cpu_dai);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
+ if (cpu_dai->resume && cpu_dai->ac97_control)
+ cpu_dai->resume(cpu_dai);
}
if (codec_dev->resume)
}
/* unmute any active DACs */
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *dai = machine->dai_link[i].codec_dai;
- if (dai->dai_ops.digital_mute && dai->playback.active)
- dai->dai_ops.digital_mute(dai, 0);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *dai = card->dai_link[i].codec_dai;
+ if (dai->ops.digital_mute && dai->playback.active)
+ dai->ops.digital_mute(dai, 0);
}
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
- if (cpu_dai->resume && cpu_dai->type != SND_SOC_DAI_AC97)
- cpu_dai->resume(pdev, cpu_dai);
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
+ if (cpu_dai->resume && !cpu_dai->ac97_control)
+ cpu_dai->resume(cpu_dai);
if (platform->resume)
- platform->resume(pdev, cpu_dai);
+ platform->resume(cpu_dai);
}
- if (machine->resume_post)
- machine->resume_post(pdev);
+ if (card->resume_post)
+ card->resume_post(pdev);
- dev_info(socdev->dev, "resume work completed\n");
+ dev_dbg(socdev->dev, "resume work completed\n");
/* userspace can access us now we are back as we were before */
snd_power_change_state(codec->card, SNDRV_CTL_POWER_D0);
static int soc_resume(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = socdev->card;
- dev_info(socdev->dev, "scheduling resume work\n");
+ dev_dbg(socdev->dev, "scheduling resume work\n");
- if (!schedule_work(&socdev->deferred_resume_work))
- dev_err(socdev->dev, "work item may be lost\n");
+ if (!schedule_work(&card->deferred_resume_work))
+ dev_err(socdev->dev, "resume work item may be lost\n");
return 0;
}
#define soc_resume NULL
#endif
-/* probes a new socdev */
-static int soc_probe(struct platform_device *pdev)
+static void snd_soc_instantiate_card(struct snd_soc_card *card)
{
- int ret = 0, i;
- struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_platform *platform = socdev->platform;
- struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
+ struct platform_device *pdev = container_of(card->dev,
+ struct platform_device,
+ dev);
+ struct snd_soc_codec_device *codec_dev = card->socdev->codec_dev;
+ struct snd_soc_platform *platform;
+ struct snd_soc_dai *dai;
+ int i, found, ret, ac97;
+
+ if (card->instantiated)
+ return;
+
+ found = 0;
+ list_for_each_entry(platform, &platform_list, list)
+ if (card->platform == platform) {
+ found = 1;
+ break;
+ }
+ if (!found) {
+ dev_dbg(card->dev, "Platform %s not registered\n",
+ card->platform->name);
+ return;
+ }
+
+ ac97 = 0;
+ for (i = 0; i < card->num_links; i++) {
+ found = 0;
+ list_for_each_entry(dai, &dai_list, list)
+ if (card->dai_link[i].cpu_dai == dai) {
+ found = 1;
+ break;
+ }
+ if (!found) {
+ dev_dbg(card->dev, "DAI %s not registered\n",
+ card->dai_link[i].cpu_dai->name);
+ return;
+ }
- if (machine->probe) {
- ret = machine->probe(pdev);
+ if (card->dai_link[i].cpu_dai->ac97_control)
+ ac97 = 1;
+ }
+
+ /* If we have AC97 in the system then don't wait for the
+ * codec. This will need revisiting if we have to handle
+ * systems with mixed AC97 and non-AC97 parts. Only check for
+ * DAIs currently; we can't do this per link since some AC97
+ * codecs have non-AC97 DAIs.
+ */
+ if (!ac97)
+ for (i = 0; i < card->num_links; i++) {
+ found = 0;
+ list_for_each_entry(dai, &dai_list, list)
+ if (card->dai_link[i].codec_dai == dai) {
+ found = 1;
+ break;
+ }
+ if (!found) {
+ dev_dbg(card->dev, "DAI %s not registered\n",
+ card->dai_link[i].codec_dai->name);
+ return;
+ }
+ }
+
+ /* Note that we do not current check for codec components */
+
+ dev_dbg(card->dev, "All components present, instantiating\n");
+
+ /* Found everything, bring it up */
+ if (card->probe) {
+ ret = card->probe(pdev);
if (ret < 0)
- return ret;
+ return;
}
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
if (cpu_dai->probe) {
ret = cpu_dai->probe(pdev, cpu_dai);
if (ret < 0)
}
/* DAPM stream work */
- INIT_DELAYED_WORK(&socdev->delayed_work, close_delayed_work);
+ INIT_DELAYED_WORK(&card->delayed_work, close_delayed_work);
#ifdef CONFIG_PM
/* deferred resume work */
- INIT_WORK(&socdev->deferred_resume_work, soc_resume_deferred);
+ INIT_WORK(&card->deferred_resume_work, soc_resume_deferred);
#endif
- return 0;
+ card->instantiated = 1;
+
+ return;
platform_err:
if (codec_dev->remove)
cpu_dai_err:
for (i--; i >= 0; i--) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
if (cpu_dai->remove)
cpu_dai->remove(pdev, cpu_dai);
}
- if (machine->remove)
- machine->remove(pdev);
+ if (card->remove)
+ card->remove(pdev);
+}
- return ret;
+/*
+ * Attempt to initialise any uninitalised cards. Must be called with
+ * client_mutex.
+ */
+static void snd_soc_instantiate_cards(void)
+{
+ struct snd_soc_card *card;
+ list_for_each_entry(card, &card_list, list)
+ snd_soc_instantiate_card(card);
+}
+
+/* probes a new socdev */
+static int soc_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct snd_soc_device *socdev = platform_get_drvdata(pdev);
+ struct snd_soc_card *card = socdev->card;
+
+ /* Bodge while we push things out of socdev */
+ card->socdev = socdev;
+
+ /* Bodge while we unpick instantiation */
+ card->dev = &pdev->dev;
+ ret = snd_soc_register_card(card);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to register card\n");
+ return ret;
+ }
+
+ return 0;
}
/* removes a socdev */
{
int i;
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
- struct snd_soc_machine *machine = socdev->machine;
- struct snd_soc_platform *platform = socdev->platform;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
- run_delayed_work(&socdev->delayed_work);
+ run_delayed_work(&card->delayed_work);
if (platform->remove)
platform->remove(pdev);
if (codec_dev->remove)
codec_dev->remove(pdev);
- for (i = 0; i < machine->num_links; i++) {
- struct snd_soc_dai *cpu_dai = machine->dai_link[i].cpu_dai;
+ for (i = 0; i < card->num_links; i++) {
+ struct snd_soc_dai *cpu_dai = card->dai_link[i].cpu_dai;
if (cpu_dai->remove)
cpu_dai->remove(pdev, cpu_dai);
}
- if (machine->remove)
- machine->remove(pdev);
+ if (card->remove)
+ card->remove(pdev);
+
+ snd_soc_unregister_card(card);
return 0;
}
struct snd_soc_dai_link *dai_link, int num)
{
struct snd_soc_codec *codec = socdev->codec;
+ struct snd_soc_card *card = socdev->card;
+ struct snd_soc_platform *platform = card->platform;
struct snd_soc_dai *codec_dai = dai_link->codec_dai;
struct snd_soc_dai *cpu_dai = dai_link->cpu_dai;
struct snd_soc_pcm_runtime *rtd;
codec_dai->codec = socdev->codec;
/* check client and interface hw capabilities */
- sprintf(new_name, "%s %s-%s-%d", dai_link->stream_name, codec_dai->name,
- get_dai_name(cpu_dai->type), num);
+ sprintf(new_name, "%s %s-%d", dai_link->stream_name, codec_dai->name,
+ num);
if (codec_dai->playback.channels_min)
playback = 1;
dai_link->pcm = pcm;
pcm->private_data = rtd;
- soc_pcm_ops.mmap = socdev->platform->pcm_ops->mmap;
- soc_pcm_ops.pointer = socdev->platform->pcm_ops->pointer;
- soc_pcm_ops.ioctl = socdev->platform->pcm_ops->ioctl;
- soc_pcm_ops.copy = socdev->platform->pcm_ops->copy;
- soc_pcm_ops.silence = socdev->platform->pcm_ops->silence;
- soc_pcm_ops.ack = socdev->platform->pcm_ops->ack;
- soc_pcm_ops.page = socdev->platform->pcm_ops->page;
+ soc_pcm_ops.mmap = platform->pcm_ops->mmap;
+ soc_pcm_ops.pointer = platform->pcm_ops->pointer;
+ soc_pcm_ops.ioctl = platform->pcm_ops->ioctl;
+ soc_pcm_ops.copy = platform->pcm_ops->copy;
+ soc_pcm_ops.silence = platform->pcm_ops->silence;
+ soc_pcm_ops.ack = platform->pcm_ops->ack;
+ soc_pcm_ops.page = platform->pcm_ops->page;
if (playback)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &soc_pcm_ops);
if (capture)
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &soc_pcm_ops);
- ret = socdev->platform->pcm_new(codec->card, codec_dai, pcm);
+ ret = platform->pcm_new(codec->card, codec_dai, pcm);
if (ret < 0) {
printk(KERN_ERR "asoc: platform pcm constructor failed\n");
kfree(rtd);
return ret;
}
- pcm->private_free = socdev->platform->pcm_free;
+ pcm->private_free = platform->pcm_free;
printk(KERN_INFO "asoc: %s <-> %s mapping ok\n", codec_dai->name,
cpu_dai->name);
return ret;
}
/* codec register dump */
-static ssize_t codec_reg_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t soc_codec_reg_show(struct snd_soc_device *devdata, char *buf)
{
- struct snd_soc_device *devdata = dev_get_drvdata(dev);
struct snd_soc_codec *codec = devdata->codec;
int i, step = 1, count = 0;
return count;
}
+static ssize_t codec_reg_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct snd_soc_device *devdata = dev_get_drvdata(dev);
+ return soc_codec_reg_show(devdata, buf);
+}
+
static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL);
+#ifdef CONFIG_DEBUG_FS
+static int codec_reg_open_file(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t ret;
+ struct snd_soc_codec *codec = file->private_data;
+ struct device *card_dev = codec->card->dev;
+ struct snd_soc_device *devdata = card_dev->driver_data;
+ char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ ret = soc_codec_reg_show(devdata, buf);
+ if (ret >= 0)
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+ kfree(buf);
+ return ret;
+}
+
+static ssize_t codec_reg_write_file(struct file *file,
+ const char __user *user_buf, size_t count, loff_t *ppos)
+{
+ char buf[32];
+ int buf_size;
+ char *start = buf;
+ unsigned long reg, value;
+ int step = 1;
+ struct snd_soc_codec *codec = file->private_data;
+
+ buf_size = min(count, (sizeof(buf)-1));
+ if (copy_from_user(buf, user_buf, buf_size))
+ return -EFAULT;
+ buf[buf_size] = 0;
+
+ if (codec->reg_cache_step)
+ step = codec->reg_cache_step;
+
+ while (*start == ' ')
+ start++;
+ reg = simple_strtoul(start, &start, 16);
+ if ((reg >= codec->reg_cache_size) || (reg % step))
+ return -EINVAL;
+ while (*start == ' ')
+ start++;
+ if (strict_strtoul(start, 16, &value))
+ return -EINVAL;
+ codec->write(codec, reg, value);
+ return buf_size;
+}
+
+static const struct file_operations codec_reg_fops = {
+ .open = codec_reg_open_file,
+ .read = codec_reg_read_file,
+ .write = codec_reg_write_file,
+};
+
+static void soc_init_codec_debugfs(struct snd_soc_codec *codec)
+{
+ codec->debugfs_reg = debugfs_create_file("codec_reg", 0644,
+ debugfs_root, codec,
+ &codec_reg_fops);
+ if (!codec->debugfs_reg)
+ printk(KERN_WARNING
+ "ASoC: Failed to create codec register debugfs file\n");
+
+ codec->debugfs_pop_time = debugfs_create_u32("dapm_pop_time", 0744,
+ debugfs_root,
+ &codec->pop_time);
+ if (!codec->debugfs_pop_time)
+ printk(KERN_WARNING
+ "Failed to create pop time debugfs file\n");
+}
+
+static void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
+{
+ debugfs_remove(codec->debugfs_pop_time);
+ debugfs_remove(codec->debugfs_reg);
+}
+
+#else
+
+static inline void soc_init_codec_debugfs(struct snd_soc_codec *codec)
+{
+}
+
+static inline void soc_cleanup_codec_debugfs(struct snd_soc_codec *codec)
+{
+}
+#endif
+
/**
* snd_soc_new_ac97_codec - initailise AC97 device
* @codec: audio codec
int snd_soc_new_pcms(struct snd_soc_device *socdev, int idx, const char *xid)
{
struct snd_soc_codec *codec = socdev->codec;
- struct snd_soc_machine *machine = socdev->machine;
+ struct snd_soc_card *card = socdev->card;
int ret = 0, i;
mutex_lock(&codec->mutex);
strncpy(codec->card->driver, codec->name, sizeof(codec->card->driver));
/* create the pcms */
- for (i = 0; i < machine->num_links; i++) {
- ret = soc_new_pcm(socdev, &machine->dai_link[i], i);
+ for (i = 0; i < card->num_links; i++) {
+ ret = soc_new_pcm(socdev, &card->dai_link[i], i);
if (ret < 0) {
printk(KERN_ERR "asoc: can't create pcm %s\n",
- machine->dai_link[i].stream_name);
+ card->dai_link[i].stream_name);
mutex_unlock(&codec->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_new_pcms);
/**
- * snd_soc_register_card - register sound card
+ * snd_soc_init_card - register sound card
* @socdev: the SoC audio device
*
* Register a SoC sound card. Also registers an AC97 device if the
*
* Returns 0 for success, else error.
*/
-int snd_soc_register_card(struct snd_soc_device *socdev)
+int snd_soc_init_card(struct snd_soc_device *socdev)
{
struct snd_soc_codec *codec = socdev->codec;
- struct snd_soc_machine *machine = socdev->machine;
+ struct snd_soc_card *card = socdev->card;
int ret = 0, i, ac97 = 0, err = 0;
- for (i = 0; i < machine->num_links; i++) {
- if (socdev->machine->dai_link[i].init) {
- err = socdev->machine->dai_link[i].init(codec);
+ for (i = 0; i < card->num_links; i++) {
+ if (card->dai_link[i].init) {
+ err = card->dai_link[i].init(codec);
if (err < 0) {
printk(KERN_ERR "asoc: failed to init %s\n",
- socdev->machine->dai_link[i].stream_name);
+ card->dai_link[i].stream_name);
continue;
}
}
- if (socdev->machine->dai_link[i].codec_dai->type ==
- SND_SOC_DAI_AC97_BUS)
+ if (card->dai_link[i].codec_dai->ac97_control)
ac97 = 1;
}
snprintf(codec->card->shortname, sizeof(codec->card->shortname),
- "%s", machine->name);
+ "%s", card->name);
snprintf(codec->card->longname, sizeof(codec->card->longname),
- "%s (%s)", machine->name, codec->name);
+ "%s (%s)", card->name, codec->name);
ret = snd_card_register(codec->card);
if (ret < 0) {
if (err < 0)
printk(KERN_WARNING "asoc: failed to add codec sysfs files\n");
+ soc_init_codec_debugfs(socdev->codec);
mutex_unlock(&codec->mutex);
out:
return ret;
}
-EXPORT_SYMBOL_GPL(snd_soc_register_card);
+EXPORT_SYMBOL_GPL(snd_soc_init_card);
/**
* snd_soc_free_pcms - free sound card and pcms
#endif
mutex_lock(&codec->mutex);
+ soc_cleanup_codec_debugfs(socdev->codec);
#ifdef CONFIG_SND_SOC_AC97_BUS
for (i = 0; i < codec->num_dai; i++) {
codec_dai = &codec->dai[i];
- if (codec_dai->type == SND_SOC_DAI_AC97_BUS && codec->ac97) {
+ if (codec_dai->ac97_control && codec->ac97) {
soc_ac97_dev_unregister(codec);
goto free_card;
}
int snd_soc_dai_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
- if (dai->dai_ops.set_sysclk)
- return dai->dai_ops.set_sysclk(dai, clk_id, freq, dir);
+ if (dai->ops.set_sysclk)
+ return dai->ops.set_sysclk(dai, clk_id, freq, dir);
else
return -EINVAL;
}
int snd_soc_dai_set_clkdiv(struct snd_soc_dai *dai,
int div_id, int div)
{
- if (dai->dai_ops.set_clkdiv)
- return dai->dai_ops.set_clkdiv(dai, div_id, div);
+ if (dai->ops.set_clkdiv)
+ return dai->ops.set_clkdiv(dai, div_id, div);
else
return -EINVAL;
}
int snd_soc_dai_set_pll(struct snd_soc_dai *dai,
int pll_id, unsigned int freq_in, unsigned int freq_out)
{
- if (dai->dai_ops.set_pll)
- return dai->dai_ops.set_pll(dai, pll_id, freq_in, freq_out);
+ if (dai->ops.set_pll)
+ return dai->ops.set_pll(dai, pll_id, freq_in, freq_out);
else
return -EINVAL;
}
/**
* snd_soc_dai_set_fmt - configure DAI hardware audio format.
* @dai: DAI
- * @clk_id: DAI specific clock ID
* @fmt: SND_SOC_DAIFMT_ format value.
*
* Configures the DAI hardware format and clocking.
*/
int snd_soc_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
- if (dai->dai_ops.set_fmt)
- return dai->dai_ops.set_fmt(dai, fmt);
+ if (dai->ops.set_fmt)
+ return dai->ops.set_fmt(dai, fmt);
else
return -EINVAL;
}
int snd_soc_dai_set_tdm_slot(struct snd_soc_dai *dai,
unsigned int mask, int slots)
{
- if (dai->dai_ops.set_sysclk)
- return dai->dai_ops.set_tdm_slot(dai, mask, slots);
+ if (dai->ops.set_sysclk)
+ return dai->ops.set_tdm_slot(dai, mask, slots);
else
return -EINVAL;
}
*/
int snd_soc_dai_set_tristate(struct snd_soc_dai *dai, int tristate)
{
- if (dai->dai_ops.set_sysclk)
- return dai->dai_ops.set_tristate(dai, tristate);
+ if (dai->ops.set_sysclk)
+ return dai->ops.set_tristate(dai, tristate);
else
return -EINVAL;
}
*/
int snd_soc_dai_digital_mute(struct snd_soc_dai *dai, int mute)
{
- if (dai->dai_ops.digital_mute)
- return dai->dai_ops.digital_mute(dai, mute);
+ if (dai->ops.digital_mute)
+ return dai->ops.digital_mute(dai, mute);
else
return -EINVAL;
}
EXPORT_SYMBOL_GPL(snd_soc_dai_digital_mute);
-static int __devinit snd_soc_init(void)
+/**
+ * snd_soc_register_card - Register a card with the ASoC core
+ *
+ * @param card Card to register
+ *
+ * Note that currently this is an internal only function: it will be
+ * exposed to machine drivers after further backporting of ASoC v2
+ * registration APIs.
+ */
+static int snd_soc_register_card(struct snd_soc_card *card)
+{
+ if (!card->name || !card->dev)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&card->list);
+ card->instantiated = 0;
+
+ mutex_lock(&client_mutex);
+ list_add(&card->list, &card_list);
+ snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
+
+ dev_dbg(card->dev, "Registered card '%s'\n", card->name);
+
+ return 0;
+}
+
+/**
+ * snd_soc_unregister_card - Unregister a card with the ASoC core
+ *
+ * @param card Card to unregister
+ *
+ * Note that currently this is an internal only function: it will be
+ * exposed to machine drivers after further backporting of ASoC v2
+ * registration APIs.
+ */
+static int snd_soc_unregister_card(struct snd_soc_card *card)
+{
+ mutex_lock(&client_mutex);
+ list_del(&card->list);
+ mutex_unlock(&client_mutex);
+
+ dev_dbg(card->dev, "Unregistered card '%s'\n", card->name);
+
+ return 0;
+}
+
+/**
+ * snd_soc_register_dai - Register a DAI with the ASoC core
+ *
+ * @param dai DAI to register
+ */
+int snd_soc_register_dai(struct snd_soc_dai *dai)
+{
+ if (!dai->name)
+ return -EINVAL;
+
+ /* The device should become mandatory over time */
+ if (!dai->dev)
+ printk(KERN_WARNING "No device for DAI %s\n", dai->name);
+
+ INIT_LIST_HEAD(&dai->list);
+
+ mutex_lock(&client_mutex);
+ list_add(&dai->list, &dai_list);
+ snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Registered DAI '%s'\n", dai->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_register_dai);
+
+/**
+ * snd_soc_unregister_dai - Unregister a DAI from the ASoC core
+ *
+ * @param dai DAI to unregister
+ */
+void snd_soc_unregister_dai(struct snd_soc_dai *dai)
+{
+ mutex_lock(&client_mutex);
+ list_del(&dai->list);
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Unregistered DAI '%s'\n", dai->name);
+}
+EXPORT_SYMBOL_GPL(snd_soc_unregister_dai);
+
+/**
+ * snd_soc_register_dais - Register multiple DAIs with the ASoC core
+ *
+ * @param dai Array of DAIs to register
+ * @param count Number of DAIs
+ */
+int snd_soc_register_dais(struct snd_soc_dai *dai, size_t count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ ret = snd_soc_register_dai(&dai[i]);
+ if (ret != 0)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ for (i--; i >= 0; i--)
+ snd_soc_unregister_dai(&dai[i]);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(snd_soc_register_dais);
+
+/**
+ * snd_soc_unregister_dais - Unregister multiple DAIs from the ASoC core
+ *
+ * @param dai Array of DAIs to unregister
+ * @param count Number of DAIs
+ */
+void snd_soc_unregister_dais(struct snd_soc_dai *dai, size_t count)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ snd_soc_unregister_dai(&dai[i]);
+}
+EXPORT_SYMBOL_GPL(snd_soc_unregister_dais);
+
+/**
+ * snd_soc_register_platform - Register a platform with the ASoC core
+ *
+ * @param platform platform to register
+ */
+int snd_soc_register_platform(struct snd_soc_platform *platform)
+{
+ if (!platform->name)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&platform->list);
+
+ mutex_lock(&client_mutex);
+ list_add(&platform->list, &platform_list);
+ snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Registered platform '%s'\n", platform->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_register_platform);
+
+/**
+ * snd_soc_unregister_platform - Unregister a platform from the ASoC core
+ *
+ * @param platform platform to unregister
+ */
+void snd_soc_unregister_platform(struct snd_soc_platform *platform)
{
- printk(KERN_INFO "ASoC version %s\n", SND_SOC_VERSION);
+ mutex_lock(&client_mutex);
+ list_del(&platform->list);
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Unregistered platform '%s'\n", platform->name);
+}
+EXPORT_SYMBOL_GPL(snd_soc_unregister_platform);
+
+/**
+ * snd_soc_register_codec - Register a codec with the ASoC core
+ *
+ * @param codec codec to register
+ */
+int snd_soc_register_codec(struct snd_soc_codec *codec)
+{
+ if (!codec->name)
+ return -EINVAL;
+
+ /* The device should become mandatory over time */
+ if (!codec->dev)
+ printk(KERN_WARNING "No device for codec %s\n", codec->name);
+
+ INIT_LIST_HEAD(&codec->list);
+
+ mutex_lock(&client_mutex);
+ list_add(&codec->list, &codec_list);
+ snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Registered codec '%s'\n", codec->name);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(snd_soc_register_codec);
+
+/**
+ * snd_soc_unregister_codec - Unregister a codec from the ASoC core
+ *
+ * @param codec codec to unregister
+ */
+void snd_soc_unregister_codec(struct snd_soc_codec *codec)
+{
+ mutex_lock(&client_mutex);
+ list_del(&codec->list);
+ mutex_unlock(&client_mutex);
+
+ pr_debug("Unregistered codec '%s'\n", codec->name);
+}
+EXPORT_SYMBOL_GPL(snd_soc_unregister_codec);
+
+static int __init snd_soc_init(void)
+{
+#ifdef CONFIG_DEBUG_FS
+ debugfs_root = debugfs_create_dir("asoc", NULL);
+ if (IS_ERR(debugfs_root) || !debugfs_root) {
+ printk(KERN_WARNING
+ "ASoC: Failed to create debugfs directory\n");
+ debugfs_root = NULL;
+ }
+#endif
+
return platform_driver_register(&soc_driver);
}
-static void snd_soc_exit(void)
+static void __exit snd_soc_exit(void)
{
+#ifdef CONFIG_DEBUG_FS
+ debugfs_remove_recursive(debugfs_root);
+#endif
platform_driver_unregister(&soc_driver);
}
#include <linux/bitops.h>
#include <linux/platform_device.h>
#include <linux/jiffies.h>
-#include <linux/debugfs.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
module_param(dapm_status, int, 0);
MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries");
-static struct dentry *asoc_debugfs;
-
-static u32 pop_time;
-
-static void pop_wait(void)
+static void pop_wait(u32 pop_time)
{
if (pop_time)
schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time));
}
-static void pop_dbg(const char *fmt, ...)
+static void pop_dbg(u32 pop_time, const char *fmt, ...)
{
va_list args;
if (pop_time) {
vprintk(fmt, args);
- pop_wait();
+ pop_wait(pop_time);
}
va_end(args);
change = old != new;
if (change) {
- pop_dbg("pop test %s : %s in %d ms\n", widget->name,
- widget->power ? "on" : "off", pop_time);
+ pop_dbg(codec->pop_time, "pop test %s : %s in %d ms\n",
+ widget->name, widget->power ? "on" : "off",
+ codec->pop_time);
snd_soc_write(codec, widget->reg, new);
- pop_wait();
+ pop_wait(codec->pop_time);
}
pr_debug("reg %x old %x new %x change %d\n", widget->reg,
old, new, change);
struct snd_soc_dapm_widget *w)
{
int i, ret = 0;
- char name[32];
+ size_t name_len;
struct snd_soc_dapm_path *path;
/* add kcontrol */
continue;
/* add dapm control with long name */
- snprintf(name, 32, "%s %s", w->name, w->kcontrols[i].name);
- path->long_name = kstrdup (name, GFP_KERNEL);
+ name_len = 2 + strlen(w->name)
+ + strlen(w->kcontrols[i].name);
+ path->long_name = kmalloc(name_len, GFP_KERNEL);
if (path->long_name == NULL)
return -ENOMEM;
+ snprintf(path->long_name, name_len, "%s %s",
+ w->name, w->kcontrols[i].name);
+ path->long_name[name_len - 1] = '\0';
+
path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w,
path->long_name);
ret = snd_ctl_add(codec->card, path->kcontrol);
int snd_soc_dapm_sys_add(struct device *dev)
{
- int ret = 0;
-
if (!dapm_status)
return 0;
-
- ret = device_create_file(dev, &dev_attr_dapm_widget);
- if (ret != 0)
- return ret;
-
- asoc_debugfs = debugfs_create_dir("asoc", NULL);
- if (!IS_ERR(asoc_debugfs) && asoc_debugfs)
- debugfs_create_u32("dapm_pop_time", 0744, asoc_debugfs,
- &pop_time);
- else
- asoc_debugfs = NULL;
-
- return 0;
+ return device_create_file(dev, &dev_attr_dapm_widget);
}
static void snd_soc_dapm_sys_remove(struct device *dev)
if (dapm_status) {
device_remove_file(dev, &dev_attr_dapm_widget);
}
-
- if (asoc_debugfs)
- debugfs_remove_recursive(asoc_debugfs);
}
/* free all dapm widgets and resources */
return ret;
}
-/**
- * snd_soc_dapm_connect_input - connect dapm widgets
- * @codec: audio codec
- * @sink: name of target widget
- * @control: mixer control name
- * @source: name of source name
- *
- * Connects 2 dapm widgets together via a named audio path. The sink is
- * the widget receiving the audio signal, whilst the source is the sender
- * of the audio signal.
- *
- * This function has been deprecated in favour of snd_soc_dapm_add_routes().
- *
- * Returns 0 for success else error.
- */
-int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, const char *sink,
- const char *control, const char *source)
-{
- return snd_soc_dapm_add_route(codec, sink, control, source);
-}
-EXPORT_SYMBOL_GPL(snd_soc_dapm_connect_input);
-
/**
* snd_soc_dapm_add_routes - Add routes between DAPM widgets
* @codec: codec
for (i = 0; i < num; i++) {
ret = snd_soc_dapm_new_control(codec, widget);
- if (ret < 0)
+ if (ret < 0) {
+ printk(KERN_ERR
+ "ASoC: Failed to create DAPM control %s: %d\n",
+ widget->name, ret);
return ret;
+ }
widget++;
}
return 0;
enum snd_soc_bias_level level)
{
struct snd_soc_codec *codec = socdev->codec;
- struct snd_soc_machine *machine = socdev->machine;
+ struct snd_soc_card *card = socdev->card;
int ret = 0;
- if (machine->set_bias_level)
- ret = machine->set_bias_level(machine, level);
+ if (card->set_bias_level)
+ ret = card->set_bias_level(card, level);
if (ret == 0 && codec->set_bias_level)
ret = codec->set_bias_level(codec, level);
void unregister_sound_midi(int unit)
{
- return sound_remove_unit(&chains[2], unit);
+ sound_remove_unit(&chains[2], unit);
}
EXPORT_SYMBOL(unregister_sound_midi);
void unregister_sound_dsp(int unit)
{
- return sound_remove_unit(&chains[3], unit);
+ sound_remove_unit(&chains[3], unit);
}
return NULL;
}
-int soundcore_open(struct inode *inode, struct file *file)
+static int soundcore_open(struct inode *inode, struct file *file)
{
int chain;
int unit = iminor(inode);
{ "Software lock", 40 }
};
-int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
+static int __devinit add_controls(struct caiaq_controller *c, int num,
+ struct snd_usb_caiaqdev *dev)
{
- int i;
+ int i, ret;
struct snd_kcontrol *kc;
+ for (i = 0; i < num; i++, c++) {
+ kcontrol_template.name = c->name;
+ kcontrol_template.private_value = c->index;
+ kc = snd_ctl_new1(&kcontrol_template, dev);
+ ret = snd_ctl_add(dev->chip.card, kc);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+int __devinit snd_usb_caiaq_control_init(struct snd_usb_caiaqdev *dev)
+{
+ int ret = 0;
+
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
- for (i = 0; i < ARRAY_SIZE(ak1_controller); i++) {
- struct caiaq_controller *c = ak1_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(ak1_controller,
+ ARRAY_SIZE(ak1_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
- for (i = 0; i < ARRAY_SIZE(rk2_controller); i++) {
- struct caiaq_controller *c = rk2_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(rk2_controller,
+ ARRAY_SIZE(rk2_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
- for (i = 0; i < ARRAY_SIZE(rk3_controller); i++) {
- struct caiaq_controller *c = rk3_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(rk3_controller,
+ ARRAY_SIZE(rk3_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER):
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2):
- for (i = 0; i < ARRAY_SIZE(kore_controller); i++) {
- struct caiaq_controller *c = kore_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(kore_controller,
+ ARRAY_SIZE(kore_controller), dev);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
- for (i = 0; i < ARRAY_SIZE(a8dj_controller); i++) {
- struct caiaq_controller *c = a8dj_controller + i;
- kcontrol_template.name = c->name;
- kcontrol_template.private_value = c->index;
- kc = snd_ctl_new1(&kcontrol_template, dev);
- snd_ctl_add(dev->chip.card, kc);
- }
-
+ ret = add_controls(a8dj_controller,
+ ARRAY_SIZE(a8dj_controller), dev);
break;
}
- return 0;
+ return ret;
}
#endif
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.8");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.9");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
snd_rawmidi_transmit_ack(substream, 1);
return;
}
- tasklet_hi_schedule(&port->ep->tasklet);
+ tasklet_schedule(&port->ep->tasklet);
}
}
}
}
-int usb_stream_prepare_playback(struct usb_stream_kernel *sk, struct urb *inurb)
+static int usb_stream_prepare_playback(struct usb_stream_kernel *sk,
+ struct urb *inurb)
{
struct usb_stream *s = sk->s;
struct urb *io;
projects / linux-2.6-omap-h63xx.git / commitdiff