V4L/DVB (3432): Hauppauge HVR 900 Composite support

- Hauppauge HVR 900 Composite support

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 58f7b4194a0d51a6359475923c93c84e6583dad5..ed428c58b73d76098698ca123cb534ba19dd12d8 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -136,6 +136,28 @@ struct em28xx_board em28xx_boards[] = {
                        .amux     = 1,
                }},
        },
+       [EM2880_BOARD_WINTV_HVR_900] = {
+               .name         = "WinTV HVR 900",
+               .vchannels    = 3,
+               .norm         = VIDEO_MODE_PAL,
+               .has_tuner    = 0,
+               .tda9887_conf = TDA9887_PRESENT,
+               .has_tuner    = 1,
+               .decoder      = EM28XX_TVP5150,
+               .input          = {{
+                       .type     = EM28XX_VMUX_COMPOSITE1,
+                       .vmux     = 2,
+                       .amux     = 0,
+               },{
+                       .type     = EM28XX_VMUX_TELEVISION,
+                       .vmux     = 0,
+                       .amux     = 1,
+               },{
+                       .type     = EM28XX_VMUX_SVIDEO,
+                       .vmux     = 9,
+                       .amux     = 1,
+               }},
+       },
        [EM2820_BOARD_MSI_VOX_USB_2] = {
                .name           = "MSI VOX USB 2.0",
                .vchannels      = 3,
@@ -254,30 +276,47 @@ struct usb_device_id em28xx_id_table [] = {
        { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
        { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
        { USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+       { USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_WINTV_HVR_900 },
        { },
 };
 
+void em28xx_pre_card_setup(struct em28xx *dev)
+{
+       /* request some modules */
+       switch(dev->model){
+               case EM2880_BOARD_WINTV_HVR_900:
+                       {
+                               em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO?
+                               break;
+                       }
+       }
+}
+
 void em28xx_card_setup(struct em28xx *dev)
 {
        /* request some modules */
-       if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) {
-               struct tveeprom tv;
+       switch(dev->model){
+               case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
+                       {
+                               struct tveeprom tv;
 #ifdef CONFIG_MODULES
-               request_module("tveeprom");
-               request_module("ir-kbd-i2c");
-               request_module("msp3400");
+                               request_module("tveeprom");
+                               request_module("ir-kbd-i2c");
+                               request_module("msp3400");
 #endif
-               /* Call first TVeeprom */
+                               /* Call first TVeeprom */
 
-               dev->i2c_client.addr = 0xa0 >> 1;
-               tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
+                               dev->i2c_client.addr = 0xa0 >> 1;
+                               tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
 
-               dev->tuner_type= tv.tuner_type;
-               if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
-                       dev->i2s_speed=2048000;
-                       dev->has_msp34xx=1;
-               } else
-                       dev->has_msp34xx=0;
+                               dev->tuner_type= tv.tuner_type;
+                               if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
+                                       dev->i2s_speed=2048000;
+                                       dev->has_msp34xx=1;
+                               } else
+                                       dev->has_msp34xx=0;
+                               break;
+                       }
        }
 }
 

diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 1b0e10d5edd4fdaa6ead24a149a013ca2603d0e0..1726b2c26b6ce8ef20420915a7e55eb42063940b 100644 (file)
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1766,6 +1766,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
        dev->vpic.depth = 16;
        dev->vpic.palette = VIDEO_PALETTE_YUV422;
 
+       em28xx_pre_card_setup(dev);
 #ifdef CONFIG_MODULES
        /* request some modules */
        if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)

diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 119fdbedc7bf5a33d0dcdbbc56e64c129957f279..8269cca7dcdbbafcb82435265553c4aa3251d902 100644 (file)
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -41,6 +41,7 @@
 #define EM2800_BOARD_LEADTEK_WINFAST_USBII      7
 #define EM2800_BOARD_KWORLD_USB2800             8
 #define EM2820_BOARD_PINNACLE_DVC_90           9
+#define EM2880_BOARD_WINTV_HVR_900              10
 
 #define UNSET -1
 
@@ -327,6 +328,7 @@ int em28xx_set_alternate(struct em28xx *dev);
 
 /* Provided by em28xx-cards.c */
 extern int em2800_variant_detect(struct usb_device* udev,int model);
+extern void em28xx_pre_card_setup(struct em28xx *dev);
 extern void em28xx_card_setup(struct em28xx *dev);
 extern struct em28xx_board em28xx_boards[];
 extern struct usb_device_id em28xx_id_table[];