+++ /dev/null
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
-
-static int fsample_keymap[] = {
- KEY(0,0,KEY_UP),
- KEY(0,1,KEY_RIGHT),
- KEY(0,2,KEY_LEFT),
- KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_CENTER),
- KEY(0,5,KEY_0_5),
- KEY(1,0,KEY_SOFT2),
- KEY(1,1,KEY_SEND),
- KEY(1,2,KEY_END),
- KEY(1,3,KEY_VOLUMEDOWN),
- KEY(1,4,KEY_VOLUMEUP),
- KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_SOFT1),
- KEY(2,1,KEY_3),
- KEY(2,2,KEY_6),
- KEY(2,3,KEY_9),
- KEY(2,4,KEY_SHARP),
- KEY(2,5,KEY_2_5),
- KEY(3,0,KEY_BACK),
- KEY(3,1,KEY_2),
- KEY(3,2,KEY_5),
- KEY(3,3,KEY_8),
- KEY(3,4,KEY_0),
- KEY(3,5,KEY_HEADSETHOOK),
- KEY(4,0,KEY_HOME),
- KEY(4,1,KEY_1),
- KEY(4,2,KEY_4),
- KEY(4,3,KEY_7),
- KEY(4,4,KEY_STAR),
- KEY(4,5,KEY_POWER),
- 0
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
- .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_730_MPU_EXT_NIRQ,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mtd_partition nor_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* rest of flash is a file system */
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- },
-};
-
-static struct flash_platform_data nor_data = {
- .map_name = "cfi_probe",
- .width = 2,
- .parts = nor_partitions,
- .nr_parts = ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
- .start = OMAP_CS0_PHYS,
- .end = OMAP_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
- .name = "omapflash",
- .id = 0,
- .dev = {
- .platform_data = &nor_data,
- },
- .num_resources = 1,
- .resource = &nor_resource,
-};
-
-static struct nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
-};
-
-static struct resource nand_resource = {
- .start = OMAP_CS3_PHYS,
- .end = OMAP_CS3_PHYS + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
- .name = "omapnand",
- .id = 0,
- .dev = {
- .platform_data = &nand_data,
- },
- .num_resources = 1,
- .resource = &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
- [0] = {
- .start = INT_730_MPUIO_KEYPAD,
- .end = INT_730_MPUIO_KEYPAD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = fsample_keymap,
-};
-
-static struct platform_device kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &kp_data,
- },
- .num_resources = ARRAY_SIZE(kp_resources),
- .resource = kp_resources,
-};
-
-static struct platform_device lcd_device = {
- .name = "lcd_p2",
- .id = -1,
-};
-
-static struct platform_device *devices[] __initdata = {
- &nor_device,
- &nand_device,
- &smc91x_device,
- &kp_device,
- &lcd_device,
-};
-
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct nand_platform_data *data)
-{
- return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
-}
-
-static struct omap_uart_config fsample_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
-static struct omap_lcd_config fsample_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel fsample_config[] = {
- { OMAP_TAG_UART, &fsample_uart_config },
- { OMAP_TAG_LCD, &fsample_lcd_config },
-};
-
-static void __init omap_fsample_init(void)
-{
- if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
- nand_data.dev_ready = nand_dev_ready;
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = fsample_config;
- omap_board_config_size = ARRAY_SIZE(fsample_config);
- omap_serial_init();
-}
-
-static void __init fsample_init_smc91x(void)
-{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
- mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
- H2P2_DBG_FPGA_LAN_RESET);
- mdelay(50);
-}
-
-void omap_fsample_init_irq(void)
-{
- omap1_init_common_hw();
- omap_init_irq();
- omap_gpio_init();
- fsample_init_smc91x();
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = FSAMPLE_CPLD_BASE,
- .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
- .length = FSAMPLE_CPLD_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_fsample_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_fsample_io_desc,
- ARRAY_SIZE(omap_fsample_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
-
- /*
- * Ethernet support through the debug board
- * CS1 timings setup
- */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
- .phys_io = 0xfff00000,
- .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
- .boot_params = 0x10000100,
- .map_io = omap_fsample_map_io,
- .init_irq = omap_fsample_init_irq,
- .init_machine = omap_fsample_init,
- .timer = &omap_timer,
-MACHINE_END
-/*
- * linux/arch/arm/mach-omap1/board-fsample.c
- *
- * Modified from board-perseus2.c
- *
- * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
- * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/input.h>
-
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
-
-static int fsample_keymap[] = {
- KEY(0,0,KEY_UP),
- KEY(0,1,KEY_RIGHT),
- KEY(0,2,KEY_LEFT),
- KEY(0,3,KEY_DOWN),
- KEY(0,4,KEY_CENTER),
- KEY(0,5,KEY_0_5),
- KEY(1,0,KEY_SOFT2),
- KEY(1,1,KEY_SEND),
- KEY(1,2,KEY_END),
- KEY(1,3,KEY_VOLUMEDOWN),
- KEY(1,4,KEY_VOLUMEUP),
- KEY(1,5,KEY_RECORD),
- KEY(2,0,KEY_SOFT1),
- KEY(2,1,KEY_3),
- KEY(2,2,KEY_6),
- KEY(2,3,KEY_9),
- KEY(2,4,KEY_SHARP),
- KEY(2,5,KEY_2_5),
- KEY(3,0,KEY_BACK),
- KEY(3,1,KEY_2),
- KEY(3,2,KEY_5),
- KEY(3,3,KEY_8),
- KEY(3,4,KEY_0),
- KEY(3,5,KEY_HEADSETHOOK),
- KEY(4,0,KEY_HOME),
- KEY(4,1,KEY_1),
- KEY(4,2,KEY_4),
- KEY(4,3,KEY_7),
- KEY(4,4,KEY_STAR),
- KEY(4,5,KEY_POWER),
- 0
-};
-
-static struct resource smc91x_resources[] = {
- [0] = {
- .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
- .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = INT_730_MPU_EXT_NIRQ,
- .end = 0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct mtd_partition nor_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "bootloader",
- .offset = 0,
- .size = SZ_128K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "params",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* rest of flash is a file system */
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- },
-};
-
-static struct flash_platform_data nor_data = {
- .map_name = "cfi_probe",
- .width = 2,
- .parts = nor_partitions,
- .nr_parts = ARRAY_SIZE(nor_partitions),
-};
-
-static struct resource nor_resource = {
- .start = OMAP_CS0_PHYS,
- .end = OMAP_CS0_PHYS + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nor_device = {
- .name = "omapflash",
- .id = 0,
- .dev = {
- .platform_data = &nor_data,
- },
- .num_resources = 1,
- .resource = &nor_resource,
-};
-
-static struct nand_platform_data nand_data = {
- .options = NAND_SAMSUNG_LP_OPTIONS,
-};
-
-static struct resource nand_resource = {
- .start = OMAP_CS3_PHYS,
- .end = OMAP_CS3_PHYS + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device nand_device = {
- .name = "omapnand",
- .id = 0,
- .dev = {
- .platform_data = &nand_data,
- },
- .num_resources = 1,
- .resource = &nand_resource,
-};
-
-static struct platform_device smc91x_device = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(smc91x_resources),
- .resource = smc91x_resources,
-};
-
-static struct resource kp_resources[] = {
- [0] = {
- .start = INT_730_MPUIO_KEYPAD,
- .end = INT_730_MPUIO_KEYPAD,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct omap_kp_platform_data kp_data = {
- .rows = 8,
- .cols = 8,
- .keymap = fsample_keymap,
-};
-
-static struct platform_device kp_device = {
- .name = "omap-keypad",
- .id = -1,
- .dev = {
- .platform_data = &kp_data,
- },
- .num_resources = ARRAY_SIZE(kp_resources),
- .resource = kp_resources,
-};
-
-static struct platform_device lcd_device = {
- .name = "lcd_p2",
- .id = -1,
-};
-
-static struct platform_device *devices[] __initdata = {
- &nor_device,
- &nand_device,
- &smc91x_device,
- &kp_device,
- &lcd_device,
-};
-
-#define P2_NAND_RB_GPIO_PIN 62
-
-static int nand_dev_ready(struct nand_platform_data *data)
-{
- return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
-}
-
-static struct omap_uart_config fsample_uart_config __initdata = {
- .enabled_uarts = ((1 << 0) | (1 << 1)),
-};
-
-static struct omap_lcd_config fsample_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
-static struct omap_board_config_kernel fsample_config[] = {
- { OMAP_TAG_UART, &fsample_uart_config },
- { OMAP_TAG_LCD, &fsample_lcd_config },
-};
-
-static void __init omap_fsample_init(void)
-{
- if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
- nand_data.dev_ready = nand_dev_ready;
-
- omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
- omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-
- omap_board_config = fsample_config;
- omap_board_config_size = ARRAY_SIZE(fsample_config);
- omap_serial_init();
-}
-
-static void __init fsample_init_smc91x(void)
-{
- fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
- mdelay(50);
- fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
- H2P2_DBG_FPGA_LAN_RESET);
- mdelay(50);
-}
-
-void omap_fsample_init_irq(void)
-{
- omap1_init_common_hw();
- omap_init_irq();
- omap_gpio_init();
- fsample_init_smc91x();
-}
-
-/* Only FPGA needs to be mapped here. All others are done with ioremap */
-static struct map_desc omap_fsample_io_desc[] __initdata = {
- {
- .virtual = H2P2_DBG_FPGA_BASE,
- .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
- .length = H2P2_DBG_FPGA_SIZE,
- .type = MT_DEVICE
- },
- {
- .virtual = FSAMPLE_CPLD_BASE,
- .pfn = __phys_to_pfn(FSAMPLE_CPLD_START),
- .length = FSAMPLE_CPLD_SIZE,
- .type = MT_DEVICE
- }
-};
-
-static void __init omap_fsample_map_io(void)
-{
- omap1_map_common_io();
- iotable_init(omap_fsample_io_desc,
- ARRAY_SIZE(omap_fsample_io_desc));
-
- /* Early, board-dependent init */
-
- /*
- * Hold GSM Reset until needed
- */
- omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
-
- /*
- * UARTs -> done automagically by 8250 driver
- */
-
- /*
- * CSx timings, GPIO Mux ... setup
- */
-
- /* Flash: CS0 timings setup */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
- omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
-
- /*
- * Ethernet support through the debug board
- * CS1 timings setup
- */
- omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
- omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
-
- /*
- * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
- * It is used as the Ethernet controller interrupt
- */
- omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-}
-
-MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
-/* Maintainer: Brian Swetland <swetland@google.com> */
- .phys_io = 0xfff00000,
- .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
- .boot_params = 0x10000100,
- .map_io = omap_fsample_map_io,
- .init_irq = omap_fsample_init_irq,
- .init_machine = omap_fsample_init,
- .timer = &omap_timer,
-MACHINE_END
+++ /dev/null
-/*
- * linux/include/asm-arm/arch-omap/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE 0xE8100000
-#define FSAMPLE_CPLD_SIZE SZ_4K
-#define FSAMPLE_CPLD_START 0x05080000
-
-#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET 0
-#define FSAMPLE_CPLD_BIT_LCD_RESET 1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
-#define FSAMPLE_CPLD_BIT_OTG_RESET 9
-
-#define fsample_cpld_set(bit) \
- fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
- fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
-/*
- * linux/include/asm-arm/arch-omap/board-fsample.h
- *
- * Board-specific goodies for TI F-Sample.
- *
- * Copyright (C) 2006 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
-#define __ASM_ARCH_OMAP_FSAMPLE_H
-
-/* fsample is pretty close to p2-sample */
-#include <asm/arch/board-perseus2.h>
-
-#define fsample_cpld_read(reg) __raw_readb(reg)
-#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
-
-#define FSAMPLE_CPLD_BASE 0xE8100000
-#define FSAMPLE_CPLD_SIZE SZ_4K
-#define FSAMPLE_CPLD_START 0x05080000
-
-#define FSAMPLE_CPLD_REG_A (FSAMPLE_CPLD_BASE + 0x00)
-#define FSAMPLE_CPLD_SWITCH (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_UART (FSAMPLE_CPLD_BASE + 0x02)
-#define FSAMPLE_CPLD_REG_B (FSAMPLE_CPLD_BASE + 0x04)
-#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
-#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
-
-#define FSAMPLE_CPLD_BIT_BT_RESET 0
-#define FSAMPLE_CPLD_BIT_LCD_RESET 1
-#define FSAMPLE_CPLD_BIT_CAM_PWDN 2
-#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE 3
-#define FSAMPLE_CPLD_BIT_SD_MMC_EN 4
-#define FSAMPLE_CPLD_BIT_aGPS_PWREN 5
-#define FSAMPLE_CPLD_BIT_BACKLIGHT 6
-#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET 7
-#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N 8
-#define FSAMPLE_CPLD_BIT_OTG_RESET 9
-
-#define fsample_cpld_set(bit) \
- fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
-
-#define fsample_cpld_clear(bit) \
- fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
-
-#endif
projects / linux-2.6-omap-h63xx.git / commitdiff