]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] sata_mv: remove local copy of queue indexes
authorMark Lord <liml@rtr.ca>
Fri, 19 May 2006 20:36:36 +0000 (16:36 -0400)
committerJeff Garzik <jeff@garzik.org>
Sat, 20 May 2006 04:31:45 +0000 (00:31 -0400)
The driver currently keeps local copies of the hardware request/response queue indexes.
But it expends significant effort ensuring consistency between the two views,
and still gets it wrong after an error or reset occurs.

This patch removes the local copies, in favour of just accessing the hardware
whenever we need them.  Eventually this may need to be tweaked again for NCQ,
but for now this works and solves problems some users were seeing.

Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/scsi/sata_mv.c

index 65dc65304f515db852ccb4cdd57ce5d55317b803..dea9d4e4258654aee2f30a61b15ffc76cd0262d0 100644 (file)
@@ -308,9 +308,6 @@ struct mv_port_priv {
        dma_addr_t              crpb_dma;
        struct mv_sg            *sg_tbl;
        dma_addr_t              sg_tbl_dma;
-
-       unsigned                req_producer;           /* cp of req_in_ptr */
-       unsigned                rsp_consumer;           /* cp of rsp_out_ptr */
        u32                     pp_flags;
 };
 
@@ -943,8 +940,6 @@ static int mv_port_start(struct ata_port *ap)
        writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
                 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
-       pp->req_producer = pp->rsp_consumer = 0;
-
        /* Don't turn on EDMA here...do it before DMA commands only.  Else
         * we'll be unable to send non-data, PIO, etc due to restricted access
         * to shadow regs.
@@ -1028,10 +1023,9 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
        }
 }
 
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
 {
-       *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
-       return *index;
+       return (index + 1) & MV_MAX_Q_DEPTH_MASK;
 }
 
 static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
@@ -1059,15 +1053,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
        u16 *cw;
        struct ata_taskfile *tf;
        u16 flags = 0;
+       unsigned in_index;
 
        if (ATA_PROT_DMA != qc->tf.protocol)
                return;
 
-       /* the req producer index should be the same as we remember it */
-       WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-                 EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               pp->req_producer);
-
        /* Fill in command request block
         */
        if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1075,13 +1065,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
        WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
        flags |= qc->tag << CRQB_TAG_SHIFT;
 
-       pp->crqb[pp->req_producer].sg_addr =
+       /* get current queue index from hardware */
+       in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+                       >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+       pp->crqb[in_index].sg_addr =
                cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
-       pp->crqb[pp->req_producer].sg_addr_hi =
+       pp->crqb[in_index].sg_addr_hi =
                cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
-       pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+       pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
-       cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+       cw = &pp->crqb[in_index].ata_cmd[0];
        tf = &qc->tf;
 
        /* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1150,16 +1144,12 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
        struct mv_port_priv *pp = ap->private_data;
        struct mv_crqb_iie *crqb;
        struct ata_taskfile *tf;
+       unsigned in_index;
        u32 flags = 0;
 
        if (ATA_PROT_DMA != qc->tf.protocol)
                return;
 
-       /* the req producer index should be the same as we remember it */
-       WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-                 EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               pp->req_producer);
-
        /* Fill in Gen IIE command request block
         */
        if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1168,7 +1158,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
        WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
        flags |= qc->tag << CRQB_TAG_SHIFT;
 
-       crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+       /* get current queue index from hardware */
+       in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+                       >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+       crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
        crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
        crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
        crqb->flags = cpu_to_le32(flags);
@@ -1216,6 +1210,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
        void __iomem *port_mmio = mv_ap_base(qc->ap);
        struct mv_port_priv *pp = qc->ap->private_data;
+       unsigned in_index;
        u32 in_ptr;
 
        if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1227,23 +1222,20 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
                return ata_qc_issue_prot(qc);
        }
 
-       in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+       in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+       in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-       /* the req producer index should be the same as we remember it */
-       WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               pp->req_producer);
        /* until we do queuing, the queue should be empty at this point */
-       WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
-                 EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+       WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+               >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-       mv_inc_q_index(&pp->req_producer);      /* now incr producer index */
+       in_index = mv_inc_q_index(in_index);    /* now incr producer index */
 
        mv_start_dma(port_mmio, pp);
 
        /* and write the request in pointer to kick the EDMA to life */
        in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-       in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+       in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
        writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
        return 0;
@@ -1266,28 +1258,26 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 {
        void __iomem *port_mmio = mv_ap_base(ap);
        struct mv_port_priv *pp = ap->private_data;
+       unsigned out_index;
        u32 out_ptr;
        u8 ata_status;
 
-       out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-
-       /* the response consumer index should be the same as we remember it */
-       WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               pp->rsp_consumer);
+       out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+       out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-       ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+       ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+                                       >> CRPB_FLAG_STATUS_SHIFT;
 
        /* increment our consumer index... */
-       pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+       out_index = mv_inc_q_index(out_index);
 
        /* and, until we do NCQ, there should only be 1 CRPB waiting */
-       WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
-                 EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-               pp->rsp_consumer);
+       WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+               >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
        /* write out our inc'd consumer index so EDMA knows we're caught up */
        out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-       out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+       out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
        writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
        /* Return ATA status register for completed CRPB */