[POWERPC] 83xx: Add support for Wind River SBC834x boards

This adds the basic support for the Wind River SBC834x boards.  The
SBC8349 is more common, although it should work on the SBC8347 board
as well.  Support is heavily based on the existing MPC834x_MDS code.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 2430ac840493cb4c6a9a84213af490e42a4b188d..782bff0c322962b90e13ef476a13131a6c61422d 100644 (file)
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -55,6 +55,13 @@ config MPC837x_MDS
        select DEFAULT_UIMAGE
        help
          This option enables support for the MPC837x MDS Processor Board.
+
+config SBC834x
+       bool "Wind River SBC834x"
+       select DEFAULT_UIMAGE
+       help
+         This option enables support for the Wind River SBC834x board.
+
 endchoice
 
 config PPC_MPC831x
@@ -73,7 +80,7 @@ config MPC834x
        bool
        select PPC_UDBG_16550
        select PPC_INDIRECT_PCI
-       default y if MPC834x_MDS || MPC834x_ITX
+       default y if MPC834x_MDS || MPC834x_ITX || SBC834x
 
 config PPC_MPC836x
        bool

diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index df4662999a950fc77aee61e6bc7a9f25b8941d07..3a35242ba8904667dc28ccc75c8816d23a70298d 100644 (file)
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_MPC834x_ITX)     += mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)      += mpc836x_mds.o
 obj-$(CONFIG_MPC832x_MDS)      += mpc832x_mds.o
 obj-$(CONFIG_MPC837x_MDS)      += mpc837x_mds.o
+obj-$(CONFIG_SBC834x)          += sbc834x.o

diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
new file mode 100644 (file)
index 0000000..cf38247
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -0,0 +1,115 @@
+/*
+ * arch/powerpc/platforms/83xx/sbc834x.c
+ *
+ * Wind River SBC834x board specific routines
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc834x_mds.c support by Kumar Gala.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/time.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init sbc834x_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+       struct device_node *np;
+#endif
+
+       if (ppc_md.progress)
+               ppc_md.progress("sbc834x_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+       for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+               mpc83xx_add_bridge(np);
+#endif
+
+}
+
+static void __init sbc834x_init_IRQ(void)
+{
+       struct device_node *np;
+
+       np = of_find_node_by_type(NULL, "ipic");
+       if (!np)
+               return;
+
+       ipic_init(np, 0);
+
+       /* Initialize the default interrupt mapping priorities,
+        * in case the boot rom changed something on us.
+        */
+       ipic_set_default_priority();
+
+       of_node_put(np);
+}
+
+static struct __initdata of_device_id sbc834x_ids[] = {
+       { .type = "soc", },
+       { .compatible = "soc", },
+       {},
+};
+
+static int __init sbc834x_declare_of_platform_devices(void)
+{
+       of_platform_bus_probe(NULL, sbc834x_ids, NULL);
+       return 0;
+}
+machine_device_initcall(sbc834x, sbc834x_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init sbc834x_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       return of_flat_dt_is_compatible(root, "SBC834x");
+}
+
+define_machine(sbc834x) {
+       .name                   = "SBC834x",
+       .probe                  = sbc834x_probe,
+       .setup_arch             = sbc834x_setup_arch,
+       .init_IRQ               = sbc834x_init_IRQ,
+       .get_irq                = ipic_get_irq,
+       .restart                = mpc83xx_restart,
+       .time_init              = mpc83xx_time_init,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+};