<chapter id="blkdev">
<title>Block Devices</title>
!Eblock/blk-core.c
+!Iblock/blk-core.c
!Eblock/blk-map.c
!Iblock/blk-sysfs.c
!Eblock/blk-settings.c
!Eblock/blk-exec.c
!Eblock/blk-barrier.c
!Eblock/blk-tag.c
+!Iblock/blk-tag.c
</chapter>
<chapter id="chrdev">
-Memory Controller
+Memory Resource Controller
+
+NOTE: The Memory Resource Controller has been generically been referred
+to as the memory controller in this document. Do not confuse memory controller
+used here with the memory controller that is used in hardware.
Salient features
a. Enable CONFIG_CGROUPS
b. Enable CONFIG_RESOURCE_COUNTERS
-c. Enable CONFIG_CGROUP_MEM_CONT
+c. Enable CONFIG_CGROUP_MEM_RES_CTLR
1. Prepare the cgroups
# mkdir -p /cgroups
Since now we're in the 0 cgroup,
We can alter the memory limit:
-# echo -n 4M > /cgroups/0/memory.limit_in_bytes
+# echo 4M > /cgroups/0/memory.limit_in_bytes
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
availability of memory on the system. The user is required to re-read
this file after a write to guarantee the value committed by the kernel.
-# echo -n 1 > memory.limit_in_bytes
+# echo 1 > memory.limit_in_bytes
# cat memory.limit_in_bytes
4096
The memory.force_empty gives an interface to drop *all* charges by force.
-# echo -n 1 > memory.force_empty
+# echo 1 > memory.force_empty
will drop all charges in cgroup. Currently, this is maintained for test.
This provides an overview of GPIO access conventions on Linux.
+These calls use the gpio_* naming prefix. No other calls should use that
+prefix, or the related __gpio_* prefix.
+
What is a GPIO?
===============
not care how it's implemented.)
That said, if the convention is supported on their platform, drivers should
-use it when possible. Platforms should declare GENERIC_GPIO support in
-Kconfig (boolean true), which multi-platform drivers can depend on when
-using the include file:
+use it when possible. Platforms must declare GENERIC_GPIO support in their
+Kconfig (boolean true), and provide an <asm/gpio.h> file. Drivers that can't
+work without standard GPIO calls should have Kconfig entries which depend
+on GENERIC_GPIO. The GPIO calls are available, either as "real code" or as
+optimized-away stubs, when drivers use the include file:
- #include <asm/gpio.h>
+ #include <linux/gpio.h>
If you stick to this convention then it'll be easier for other developers to
see what your code is doing, and help maintain it.
or support them in the same way; and any given board might use external
pullups (or pulldowns) so that the on-chip ones should not be used.
(When a circuit needs 5 kOhm, on-chip 100 kOhm resistors won't do.)
+Likewise drive strength (2 mA vs 20 mA) and voltage (1.8V vs 3.3V) is a
+platform-specific issue, as are models like (not) having a one-to-one
+correspondence between configurable pins and GPIOs.
There are other system-specific mechanisms that are not specified here,
like the aforementioned options for input de-glitching and wire-OR output.
The Kprobes API includes a "register" function and an "unregister"
function for each type of probe. Here are terse, mini-man-page
specifications for these functions and the associated probe handlers
-that you'll write. See the latter half of this document for examples.
+that you'll write. See the files in the samples/kprobes/ sub-directory
+for examples.
4.1 register_kprobe
8. Kprobes Example
-Here's a sample kernel module showing the use of kprobes to dump a
-stack trace and selected i386 registers when do_fork() is called.
------ cut here -----
-/*kprobe_example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/sched.h>
-
-/*For each probe you need to allocate a kprobe structure*/
-static struct kprobe kp;
-
-/*kprobe pre_handler: called just before the probed instruction is executed*/
-int handler_pre(struct kprobe *p, struct pt_regs *regs)
-{
- printk("pre_handler: p->addr=0x%p, eip=%lx, eflags=0x%lx\n",
- p->addr, regs->eip, regs->eflags);
- dump_stack();
- return 0;
-}
-
-/*kprobe post_handler: called after the probed instruction is executed*/
-void handler_post(struct kprobe *p, struct pt_regs *regs, unsigned long flags)
-{
- printk("post_handler: p->addr=0x%p, eflags=0x%lx\n",
- p->addr, regs->eflags);
-}
-
-/* fault_handler: this is called if an exception is generated for any
- * instruction within the pre- or post-handler, or when Kprobes
- * single-steps the probed instruction.
- */
-int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
-{
- printk("fault_handler: p->addr=0x%p, trap #%dn",
- p->addr, trapnr);
- /* Return 0 because we don't handle the fault. */
- return 0;
-}
-
-static int __init kprobe_init(void)
-{
- int ret;
- kp.pre_handler = handler_pre;
- kp.post_handler = handler_post;
- kp.fault_handler = handler_fault;
- kp.symbol_name = "do_fork";
-
- ret = register_kprobe(&kp);
- if (ret < 0) {
- printk("register_kprobe failed, returned %d\n", ret);
- return ret;
- }
- printk("kprobe registered\n");
- return 0;
-}
-
-static void __exit kprobe_exit(void)
-{
- unregister_kprobe(&kp);
- printk("kprobe unregistered\n");
-}
-
-module_init(kprobe_init)
-module_exit(kprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-You can build the kernel module, kprobe-example.ko, using the following
-Makefile:
------ cut here -----
-obj-m := kprobe-example.o
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-default:
- $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-clean:
- rm -f *.mod.c *.ko *.o
------ cut here -----
-
-$ make
-$ su -
-...
-# insmod kprobe-example.ko
-
-You will see the trace data in /var/log/messages and on the console
-whenever do_fork() is invoked to create a new process.
+See samples/kprobes/kprobe_example.c
9. Jprobes Example
-Here's a sample kernel module showing the use of jprobes to dump
-the arguments of do_fork().
------ cut here -----
-/*jprobe-example.c */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/uio.h>
-#include <linux/kprobes.h>
-
-/*
- * Jumper probe for do_fork.
- * Mirror principle enables access to arguments of the probed routine
- * from the probe handler.
- */
-
-/* Proxy routine having the same arguments as actual do_fork() routine */
-long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
- struct pt_regs *regs, unsigned long stack_size,
- int __user * parent_tidptr, int __user * child_tidptr)
-{
- printk("jprobe: clone_flags=0x%lx, stack_size=0x%lx, regs=0x%p\n",
- clone_flags, stack_size, regs);
- /* Always end with a call to jprobe_return(). */
- jprobe_return();
- /*NOTREACHED*/
- return 0;
-}
-
-static struct jprobe my_jprobe = {
- .entry = jdo_fork
-};
-
-static int __init jprobe_init(void)
-{
- int ret;
- my_jprobe.kp.symbol_name = "do_fork";
-
- if ((ret = register_jprobe(&my_jprobe)) <0) {
- printk("register_jprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Planted jprobe at %p, handler addr %p\n",
- my_jprobe.kp.addr, my_jprobe.entry);
- return 0;
-}
-
-static void __exit jprobe_exit(void)
-{
- unregister_jprobe(&my_jprobe);
- printk("jprobe unregistered\n");
-}
-
-module_init(jprobe_init)
-module_exit(jprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on
-the console whenever do_fork() is invoked to create a new process.
-(Some messages may be suppressed if syslogd is configured to
-eliminate duplicate messages.)
+See samples/kprobes/jprobe_example.c
10. Kretprobes Example
-Here's a sample kernel module showing the use of return probes to
-report failed calls to sys_open().
------ cut here -----
-/*kretprobe-example.c*/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/kprobes.h>
-#include <linux/ktime.h>
-
-/* per-instance private data */
-struct my_data {
- ktime_t entry_stamp;
-};
-
-static const char *probed_func = "sys_open";
-
-/* Timestamp function entry. */
-static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- struct my_data *data;
-
- if(!current->mm)
- return 1; /* skip kernel threads */
-
- data = (struct my_data *)ri->data;
- data->entry_stamp = ktime_get();
- return 0;
-}
-
-/* If the probed function failed, log the return value and duration.
- * Duration may turn out to be zero consistently, depending upon the
- * granularity of time accounting on the platform. */
-static int return_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
-{
- int retval = regs_return_value(regs);
- struct my_data *data = (struct my_data *)ri->data;
- s64 delta;
- ktime_t now;
-
- if (retval < 0) {
- now = ktime_get();
- delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
- printk("%s: return val = %d (duration = %lld ns)\n",
- probed_func, retval, delta);
- }
- return 0;
-}
-
-static struct kretprobe my_kretprobe = {
- .handler = return_handler,
- .entry_handler = entry_handler,
- .data_size = sizeof(struct my_data),
- .maxactive = 20, /* probe up to 20 instances concurrently */
-};
-
-static int __init kretprobe_init(void)
-{
- int ret;
- my_kretprobe.kp.symbol_name = (char *)probed_func;
-
- if ((ret = register_kretprobe(&my_kretprobe)) < 0) {
- printk("register_kretprobe failed, returned %d\n", ret);
- return -1;
- }
- printk("Kretprobe active on %s\n", my_kretprobe.kp.symbol_name);
- return 0;
-}
-
-static void __exit kretprobe_exit(void)
-{
- unregister_kretprobe(&my_kretprobe);
- printk("kretprobe unregistered\n");
- /* nmissed > 0 suggests that maxactive was set too low. */
- printk("Missed probing %d instances of %s\n",
- my_kretprobe.nmissed, probed_func);
-}
-
-module_init(kretprobe_init)
-module_exit(kretprobe_exit)
-MODULE_LICENSE("GPL");
------ cut here -----
-
-Build and insert the kernel module as shown in the above kprobe
-example. You will see the trace data in /var/log/messages and on the
-console whenever sys_open() returns a negative value. (Some messages
-may be suppressed if syslogd is configured to eliminate duplicate
-messages.)
+See samples/kprobes/kretprobe_example.c
For additional information on Kprobes, refer to the following URLs:
http://www-106.ibm.com/developerworks/library/l-kprobes.html?ca=dgr-lnxw42Kprobe
The ID table is an array of struct pci_device_id entries ending with an
-all-zero entry. Each entry consists of:
+all-zero entry; use of the macro DECLARE_PCI_DEVICE_TABLE is the preferred
+method of declaring the table. Each entry consists of:
vendor,device Vendor and device ID to match (or PCI_ANY_ID)
o Do not mark the struct pci_driver.
- o The ID table array should be marked __devinitdata.
+ o The ID table array should be marked __devinitconst; this is done
+ automatically if the table is declared with DECLARE_PCI_DEVICE_TABLE().
o The probe() and remove() functions should be marked __devinit
and __devexit respectively. All initialization functions
** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
** 10.fix the arcmsr_polling_hbb_ccbdone()
+** 1.20.00.15 02/27/2008 Erich Chen & Nick Cheng
+** 1.arcmsr_iop_message_xfer() is called from atomic context under the
+** queuecommand scsi_host_template handler. James Bottomley pointed out
+** that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in
+** atomic context, secondly this memory is not used for DMA.
+** Also removed some unneeded casts. Thanks to Daniel Drake <dsd@gentoo.org>
**************************************************************************
W: http://accessrunner.sourceforge.net/
S: Maintained
+CONTROL GROUPS (CGROUPS)
+P: Paul Menage
+M: menage@google.com
+L: containers@lists.linux-foundation.org
+S: Maintained
+
CORETEMP HARDWARE MONITORING DRIVER
P: Rudolf Marek
M: r.marek@assembler.cz
W: http://linux-fbdev.sourceforge.net/
S: Maintained
+FREESCALE DMA DRIVER
+P; Zhang Wei
+M: wei.zhang@freescale.com
+L: linuxppc-embedded@ozlabs.org
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
FREESCALE SOC FS_ENET DRIVER
P: Pantelis Antoniou
M: pantelis.antoniou@gmail.com
W: http://www.linux-mm.org
S: Maintained
+MEMORY RESOURCE CONTROLLER
+P: Balbir Singh
+M: balbir@linux.vnet.ibm.com
+P: Pavel Emelyanov
+M: xemul@openvz.org
+P: KAMEZAWA Hiroyuki
+M: kamezawa.hiroyu@jp.fujitsu.com
+L: linux-mm@kvack.org
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
MEI MN10300/AM33 PORT
P: David Howells
M: dhowells@redhat.com
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
+config KRETPROBES
+ def_bool y
+ depends on KPROBES && HAVE_KRETPROBES
+
config HAVE_KPROBES
def_bool n
+
+config HAVE_KRETPROBES
+ def_bool n
#endif
#define DEBUG_NODIRECT 0
-#define DEBUG_FORCEDAC 0
#define ISA_DMA_MASK 0x00ffffff
return iommu_arena_new_node(0, hose, base, window_size, align);
}
+static inline int is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size)
+{
+ shift = (shift + index) & (boundary_size - 1);
+ return shift + nr > boundary_size;
+}
+
/* Must be called with the arena lock held */
static long
-iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
+iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
+ long n, long mask)
{
unsigned long *ptes;
long i, p, nent;
+ int pass = 0;
+ unsigned long base;
+ unsigned long boundary_size;
+
+ BUG_ON(arena->dma_base & ~PAGE_MASK);
+ base = arena->dma_base >> PAGE_SHIFT;
+ if (dev)
+ boundary_size = ALIGN(dma_get_max_seg_size(dev) + 1, PAGE_SIZE)
+ >> PAGE_SHIFT;
+ else
+ boundary_size = ALIGN(1UL << 32, PAGE_SIZE) >> PAGE_SHIFT;
+
+ BUG_ON(!is_power_of_2(boundary_size));
/* Search forward for the first mask-aligned sequence of N free ptes */
ptes = arena->ptes;
nent = arena->size >> PAGE_SHIFT;
- p = (arena->next_entry + mask) & ~mask;
+ p = ALIGN(arena->next_entry, mask + 1);
i = 0;
+
+again:
while (i < n && p+i < nent) {
+ if (!i && is_span_boundary(p, n, base, boundary_size)) {
+ p = ALIGN(p + 1, mask + 1);
+ goto again;
+ }
+
if (ptes[p+i])
- p = (p + i + 1 + mask) & ~mask, i = 0;
+ p = ALIGN(p + i + 1, mask + 1), i = 0;
else
i = i + 1;
}
if (i < n) {
- /* Reached the end. Flush the TLB and restart the
- search from the beginning. */
- alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
-
- p = 0, i = 0;
- while (i < n && p+i < nent) {
- if (ptes[p+i])
- p = (p + i + 1 + mask) & ~mask, i = 0;
- else
- i = i + 1;
- }
-
- if (i < n)
+ if (pass < 1) {
+ /*
+ * Reached the end. Flush the TLB and restart
+ * the search from the beginning.
+ */
+ alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+
+ pass++;
+ p = 0;
+ i = 0;
+ goto again;
+ } else
return -1;
}
}
static long
-iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
+iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
+ unsigned int align)
{
unsigned long flags;
unsigned long *ptes;
/* Search for N empty ptes */
ptes = arena->ptes;
mask = max(align, arena->align_entry) - 1;
- p = iommu_arena_find_pages(arena, n, mask);
+ p = iommu_arena_find_pages(dev, arena, n, mask);
if (p < 0) {
spin_unlock_irqrestore(&arena->lock, flags);
return -1;
unsigned long paddr;
dma_addr_t ret;
unsigned int align = 0;
+ struct device *dev = pdev ? &pdev->dev : NULL;
paddr = __pa(cpu_addr);
/* Force allocation to 64KB boundary for ISA bridges. */
if (pdev && pdev == isa_bridge)
align = 8;
- dma_ofs = iommu_arena_alloc(arena, npages, align);
+ dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
if (dma_ofs < 0) {
printk(KERN_WARNING "pci_map_single failed: "
"could not allocate dma page tables\n");
paddr &= ~PAGE_MASK;
npages = calc_npages(paddr + size);
- dma_ofs = iommu_arena_alloc(arena, npages, 0);
+ dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
if (dma_ofs < 0) {
/* If we attempted a direct map above but failed, die. */
if (leader->dma_address == 0)
/* Search for N empty ptes. */
ptes = arena->ptes;
- p = iommu_arena_find_pages(arena, pg_count, align_mask);
+ p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
if (p < 0) {
spin_unlock_irqrestore(&arena->lock, flags);
return -1;
select SYS_SUPPORTS_APM_EMULATION
select HAVE_OPROFILE
select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KRETPROBES if (HAVE_KPROBES)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
{
pmd_t *pmd;
- struct page *pte;
+ pgtable_t pte;
if (!pgd)
return;
goto free;
}
- pte = pmd_page(*pmd);
+ pte = pmd_pgtable(*pmd);
pmd_clear(pmd);
- dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
- pte_lock_deinit(pte);
pte_free(mm, pte);
pmd_free(mm, pmd);
free:
.align 16
/*
- * Atomic ior, 32 bit.
+ * Atomic and, 32 bit.
* Inputs: P0: memory address to use
- * R0: value to ior
+ * R0: value to and
* Outputs: R0: new contents of the memory address.
* R1: previous contents of the memory address.
*/
R0 = R1 & R0;
[P0] = R0;
rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_and32)
.align 16
/*
- * Atomic ior, 32 bit.
+ * Atomic xor, 32 bit.
* Inputs: P0: memory address to use
- * R0: value to ior
+ * R0: value to xor
* Outputs: R0: new contents of the memory address.
* R1: previous contents of the memory address.
*/
R0 = R1 ^ R0;
[P0] = R0;
rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_xor32)
.align 16
/*
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
static struct platform_device bf54x_sdh_device = {
.name = "bfin-sdh",
.id = 0,
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
&bf54x_sdh_device,
#endif
.long _sys_epoll_pwait
.long _sys_utimensat
.long _sys_signalfd
- .long _sys_ni_syscall
+ .long _sys_timerfd_create
.long _sys_eventfd /* 350 */
.long _sys_pread64
.long _sys_pwrite64
.long _sys_get_robust_list /* 355 */
.long _sys_fallocate
.long _sys_semtimedop
+ .long _sys_timerfd_settime
+ .long _sys_timerfd_gettime
+
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
#include <linux/swap.h>
#include <linux/sched.h>
#include <linux/init.h>
-#include <linux/vmstat.h>
+#include <linux/mm.h>
#include <asm/arch/svinto.h>
#include <asm/types.h>
#include <asm/signal.h>
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# FUNCTION NAME: memcpy() */
-/*# */
-/*# PARAMETERS: void* dst; Destination address. */
-/*# void* src; Source address. */
-/*# int len; Number of bytes to copy. */
-/*# */
-/*# RETURNS: dst. */
-/*# */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
-/*# about copying of overlapping memory areas. This routine is */
-/*# very sensitive to compiler changes in register allocation. */
-/*# Should really be rewritten to avoid this problem. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# HISTORY */
-/*# */
-/*# DATE NAME CHANGES */
-/*# ---- ---- ------- */
-/*# 941007 Kenny R Creation */
-/*# 941011 Kenny R Lots of optimizations and inlining. */
-/*# 941129 Ulf A Adapted for use in libc. */
-/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
-/*# Added some optimizations. */
-/*# 001025 HP Make src and dst char *. Align dst to */
-/*# dword, not just word-if-both-src-and-dst- */
-/*# are-misaligned. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
- const void *psrc,
- size_t pn)
+/* A memcpy for CRIS.
+ Copyright (C) 1994-2005 Axis Communications.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ 2. Neither the name of Axis Communications nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+ COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE. */
+
+/* FIXME: This file should really only be used for reference, as the
+ result is somewhat depending on gcc generating what we expect rather
+ than what we describe. An assembly file should be used instead. */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+ modulo 44, so up to the next multiple of 44, we use ordinary code. */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file. */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
{
- /* Ok. Now we want the parameters put in special registers.
+ /* Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
+ register unsigned char *dst __asm__ ("r13") = pdst;
+ register unsigned const char *src __asm__ ("r11") = psrc;
register int n __asm__ ("r12") = pn;
-
-
+
/* When src is aligned but not dst, this makes a few extra needless
cycles. I believe it would take as many to check that the
re-alignment was unnecessary. */
&& n >= 3)
{
if ((unsigned long) dst & 1)
- {
- n--;
- *(char*)dst = *(char*)src;
- src++;
- dst++;
- }
+ {
+ n--;
+ *dst = *src;
+ src++;
+ dst++;
+ }
if ((unsigned long) dst & 2)
- {
- n -= 2;
- *(short*)dst = *(short*)src;
- src += 2;
- dst += 2;
- }
+ {
+ n -= 2;
+ *(short *) dst = *(short *) src;
+ src += 2;
+ dst += 2;
+ }
}
- /* Decide which copying method to use. */
- if (n >= 44*2) /* Break even between movem and
- move16 is at 38.7*2, but modulo 44. */
- {
- /* For large copies we use 'movem' */
-
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal.
-
- This method is not foolproof; it assumes that the "asm reg"
- declarations at the beginning of the function really are used
- here (beware: they may be moved to temporary registers).
- This way, we do not have to save/move the registers around into
- temporaries; we can safely use them straight away.
-
- If you want to check that the allocation was right; then
- check the equalities in the first comment. It should say
- "r13=r13, r11=r11, r12=r12" */
- __asm__ volatile ("\n\
- ;; Check that the following is true (same register names on \n\
- ;; both sides of equal sign, as in r8=r8): \n\
- ;; %0=r13, %1=r11, %2=r12 \n\
- ;; \n\
- ;; Save the registers we'll use in the movem process \n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
+ /* Decide which copying method to use. */
+ if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+ {
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile
+ ("\
+ ;; GCC does promise correct register allocations, but let's \n\
+ ;; make sure it keeps its promises. \n\
+ .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
+ .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
+ .endif \n\
+ \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,sp \n\
+ movem r10,[sp] \n\
\n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
\n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
+ ;; Update n for the first loop. \n\
+ subq 44,r12 \n\
0: \n\
- movem [$r11+],$r10 \n\
- subq 44,$r12 \n\
- bge 0b \n\
- movem $r10,[$r13+] \n\
+"
+#ifdef __arch_common_v10_v32
+ /* Cater to branch offset difference between v32 and v10. We
+ assume the branch below has an 8-bit offset. */
+" setf\n"
+#endif
+" movem [r11+],r10 \n\
+ subq 44,r12 \n\
+ bge 0b \n\
+ movem r10,[r13+] \n\
\n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ ;; Compensate for last loop underflowing n. \n\
+ addq 44,r12 \n\
\n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10"
+ ;; Restore registers from stack. \n\
+ movem [sp+],r10"
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n));
-
- }
+ /* Outputs. */
+ : "=r" (dst), "=r" (src), "=r" (n)
- /* Either we directly starts copying, using dword copying
- in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
+ /* Inputs. */
+ : "0" (dst), "1" (src), "2" (n));
+ }
- while ( n >= 16 )
- {
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- n -= 16;
- }
+ while (n >= 16)
+ {
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+
+ n -= 16;
+ }
- /* A switch() is definitely the fastest although it takes a LOT of code.
- * Particularly if you inline code this.
- */
switch (n)
- {
+ {
case 0:
break;
+
case 1:
- *(char*)dst = *(char*)src;
+ *dst = *src;
break;
+
case 2:
- *(short*)dst = *(short*)src;
+ *(short *) dst = *(short *) src;
break;
+
case 3:
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 4:
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src;
break;
+
case 5:
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 6:
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 7:
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 8:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
break;
+
case 9:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 10:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 11:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 12:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
break;
+
case 13:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 14:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 15:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
- }
+ }
- return return_dst; /* destination pointer. */
-} /* memcpy() */
+ return return_dst;
+}
inaccessible. */
unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
{
/* We want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# FUNCTION NAME: memcpy() */
-/*# */
-/*# PARAMETERS: void* dst; Destination address. */
-/*# void* src; Source address. */
-/*# int len; Number of bytes to copy. */
-/*# */
-/*# RETURNS: dst. */
-/*# */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst. No guarantees */
-/*# about copying of overlapping memory areas. This routine is */
-/*# very sensitive to compiler changes in register allocation. */
-/*# Should really be rewritten to avoid this problem. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-/*# */
-/*# HISTORY */
-/*# */
-/*# DATE NAME CHANGES */
-/*# ---- ---- ------- */
-/*# 941007 Kenny R Creation */
-/*# 941011 Kenny R Lots of optimizations and inlining. */
-/*# 941129 Ulf A Adapted for use in libc. */
-/*# 950216 HP N==0 forgotten if non-aligned src/dst. */
-/*# Added some optimizations. */
-/*# 001025 HP Make src and dst char *. Align dst to */
-/*# dword, not just word-if-both-src-and-dst- */
-/*# are-misaligned. */
-/*# */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
- const void *psrc,
- size_t pn)
+/* A memcpy for CRIS.
+ Copyright (C) 1994-2005 Axis Communications.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ 2. Neither the name of Axis Communications nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+ COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE. */
+
+/* FIXME: This file should really only be used for reference, as the
+ result is somewhat depending on gcc generating what we expect rather
+ than what we describe. An assembly file should be used instead. */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+ modulo 44, so up to the next multiple of 44, we use ordinary code. */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file. */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
{
- /* Ok. Now we want the parameters put in special registers.
+ /* Now we want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
- As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+ As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
- If gcc was alright, it really would need no temporaries, and no
- stack space to save stuff on. */
+ If gcc was allright, it really would need no temporaries, and no
+ stack space to save stuff on. */
register void *return_dst __asm__ ("r10") = pdst;
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
+ register unsigned char *dst __asm__ ("r13") = pdst;
+ register unsigned const char *src __asm__ ("r11") = psrc;
register int n __asm__ ("r12") = pn;
-
/* When src is aligned but not dst, this makes a few extra needless
cycles. I believe it would take as many to check that the
re-alignment was unnecessary. */
&& n >= 3)
{
if ((unsigned long) dst & 1)
- {
- n--;
- *(char*)dst = *(char*)src;
- src++;
- dst++;
- }
+ {
+ n--;
+ *dst = *src;
+ src++;
+ dst++;
+ }
if ((unsigned long) dst & 2)
- {
- n -= 2;
- *(short*)dst = *(short*)src;
- src += 2;
- dst += 2;
- }
+ {
+ n -= 2;
+ *(short *) dst = *(short *) src;
+ src += 2;
+ dst += 2;
+ }
}
- /* Decide which copying method to use. Movem is dirt cheap, so the
- overheap is low enough to always use the minimum block size as the
- threshold. */
- if (n >= 44)
- {
- /* For large copies we use 'movem' */
-
- /* It is not optimal to tell the compiler about clobbering any
- registers; that will move the saving/restoring of those registers
- to the function prologue/epilogue, and make non-movem sizes
- suboptimal. */
- __asm__ volatile (" \n\
- ;; Check that the register asm declaration got right. \n\
- ;; The GCC manual explicitly says TRT will happen. \n\
- .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
- .err \n\
- .endif \n\
- \n\
- ;; Save the registers we'll use in the movem process \n\
+ /* Decide which copying method to use. */
+ if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+ {
+ /* It is not optimal to tell the compiler about clobbering any
+ registers; that will move the saving/restoring of those registers
+ to the function prologue/epilogue, and make non-movem sizes
+ suboptimal. */
+ __asm__ volatile
+ ("\
+ ;; GCC does promise correct register allocations, but let's \n\
+ ;; make sure it keeps its promises. \n\
+ .ifnc %0-%1-%2,$r13-$r11-$r12 \n\
+ .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\" \n\
+ .endif \n\
\n\
- ;; on the stack. \n\
- subq 11*4,$sp \n\
- movem $r10,[$sp] \n\
+ ;; Save the registers we'll use in the movem process \n\
+ ;; on the stack. \n\
+ subq 11*4,sp \n\
+ movem r10,[sp] \n\
\n\
- ;; Now we've got this: \n\
- ;; r11 - src \n\
- ;; r13 - dst \n\
- ;; r12 - n \n\
+ ;; Now we've got this: \n\
+ ;; r11 - src \n\
+ ;; r13 - dst \n\
+ ;; r12 - n \n\
\n\
- ;; Update n for the first loop \n\
- subq 44,$r12 \n\
+ ;; Update n for the first loop. \n\
+ subq 44,r12 \n\
0: \n\
- movem [$r11+],$r10 \n\
- subq 44,$r12 \n\
- bge 0b \n\
- movem $r10,[$r13+] \n\
+"
+#ifdef __arch_common_v10_v32
+ /* Cater to branch offset difference between v32 and v10. We
+ assume the branch below has an 8-bit offset. */
+" setf\n"
+#endif
+" movem [r11+],r10 \n\
+ subq 44,r12 \n\
+ bge 0b \n\
+ movem r10,[r13+] \n\
\n\
- addq 44,$r12 ;; compensate for last loop underflowing n \n\
+ ;; Compensate for last loop underflowing n. \n\
+ addq 44,r12 \n\
\n\
- ;; Restore registers from stack \n\
- movem [$sp+],$r10"
+ ;; Restore registers from stack. \n\
+ movem [sp+],r10"
- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+ /* Outputs. */
+ : "=r" (dst), "=r" (src), "=r" (n)
- }
+ /* Inputs. */
+ : "0" (dst), "1" (src), "2" (n));
+ }
- /* Either we directly starts copying, using dword copying
- in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
+ while (n >= 16)
+ {
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
- while ( n >= 16 )
- {
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- n -= 16;
- }
+ n -= 16;
+ }
- /* A switch() is definitely the fastest although it takes a LOT of code.
- * Particularly if you inline code this.
- */
switch (n)
- {
+ {
case 0:
break;
+
case 1:
- *(char*)dst = *(char*)src;
+ *dst = *src;
break;
+
case 2:
- *(short*)dst = *(short*)src;
+ *(short *) dst = *(short *) src;
break;
+
case 3:
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 4:
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src;
break;
+
case 5:
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 6:
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 7:
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 8:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
break;
+
case 9:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 10:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 11:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
+
case 12:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src;
break;
+
case 13:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *dst = *src;
break;
+
case 14:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *(short*)dst = *(short*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src;
break;
+
case 15:
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((long*)dst)++ = *((long*)src)++;
- *((short*)dst)++ = *((short*)src)++;
- *(char*)dst = *(char*)src;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(long *) dst = *(long *) src; dst += 4; src += 4;
+ *(short *) dst = *(short *) src; dst += 2; src += 2;
+ *dst = *src;
break;
- }
+ }
- return return_dst; /* destination pointer. */
-} /* memcpy() */
+ return return_dst;
+}
inaccessible. */
unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
{
/* We want the parameters put in special registers.
Make sure the compiler is able to make something useful of this.
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
config IA64_SGI_SN2
bool "SGI-SN2"
+ select NUMA
+ select ACPI_NUMA
help
Selecting this option will optimize the kernel for use on sn2 based
systems, but the resulting kernel binary will not run on other
# Copyright (C) 1998-2004 by David Mosberger-Tang <davidm@hpl.hp.com>
#
+KBUILD_DEFCONFIG := generic_defconfig
+
NM := $(CROSS_COMPILE)nm -B
READELF := $(CROSS_COMPILE)readelf
#ifdef CONFIG_IA64_GENERIC
/* Better to have normal DMA than panic */
printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
- " reverting to hpzx1 platform vector\n", __FUNCTION__);
+ " reverting to hpzx1 platform vector\n", __func__);
machvec_init("hpzx1");
#else
panic("Unable to initialize software I/O TLB services");
base_mask = RESMAP_MASK(bits_wanted);
mask = base_mask << bitshiftcnt;
- DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+ DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
for(; res_ptr < res_end ; res_ptr++)
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
#endif
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
- __FUNCTION__, size, pages_needed, pide,
+ __func__, size, pages_needed, pide,
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
ioc->res_bitshift );
m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
bits_not_wanted = 0;
- DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __FUNCTION__, (uint) iova, size,
- bits_not_wanted, m, pide, res_ptr, *res_ptr);
+ DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size,
+ bits_not_wanted, m, pide, res_ptr, *res_ptr);
ASSERT(m != 0);
ASSERT(bits_not_wanted);
iovp = (dma_addr_t) pide << iovp_shift;
- DBG_RUN("%s() 0x%p -> 0x%lx\n",
- __FUNCTION__, addr, (long) iovp | offset);
+ DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset);
pdir_start = &(ioc->pdir_base[pide]);
#endif
offset = iova & ~iovp_mask;
- DBG_RUN("%s() iovp 0x%lx/%x\n",
- __FUNCTION__, (long) iova, size);
+ DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
iova ^= offset; /* clear offset bits */
size += offset;
struct scatterlist *sg;
#endif
- DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
ioc = GET_IOC(dev);
ASSERT(ioc);
#endif
ASSERT(coalesced == filled);
- DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+ DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
return filled;
}
#endif
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
- __FUNCTION__, nents, sba_sg_address(sglist), sglist->length);
+ __func__, nents, sba_sg_address(sglist), sglist->length);
#ifdef ASSERT_PDIR_SANITY
ioc = GET_IOC(dev);
nents--;
}
- DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->iov_size = ~ioc->imask + 1;
DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
- __FUNCTION__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
+ __func__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
ioc->iov_size >> 20);
switch (iovp_size) {
memset(ioc->pdir_base, 0, ioc->pdir_size);
- DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __FUNCTION__,
+ DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__,
iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
prefetch_spill_page = virt_to_phys(addr);
- DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __FUNCTION__, prefetch_spill_page);
+ DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page);
}
/*
** Set all the PDIR entries valid w/ the spill page as the target
/* resource map size dictated by pdir_size */
ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
ioc->res_size >>= 3; /* convert bit count to byte count */
- DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+ DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
| prefetch_spill_page);
#endif
- DBG_INIT("%s() res_map %x %p\n", __FUNCTION__,
+ DBG_INIT("%s() res_map %x %p\n", __func__,
ioc->res_size, (void *) ioc->res_map);
}
iovp_size = (1 << iovp_shift);
iovp_mask = ~(iovp_size - 1);
- DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
+ DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__,
PAGE_SIZE >> 10, iovp_size >> 10);
if (!ioc->name) {
break;
default:
printk("%s: unknown/unsupported iommu page size %ld\n",
- __FUNCTION__, page_size);
+ __func__, page_size);
}
return 1;
}
if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
dev->irq = rc;
/*
if (!state->irq) {
if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
panic("%s: out of interrupt vectors!\n",
- __FUNCTION__);
+ __func__);
state->irq = rc;
ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
}
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
- if (!on_sig_stack(esp))
+ int onstack = sas_ss_flags(esp);
+
+ if (onstack == 0)
esp = current->sas_ss_sp + current->sas_ss_size;
+ else if (onstack == SS_ONSTACK) {
+ /*
+ * If we are on the alternate signal stack and would
+ * overflow it, don't. Return an always-bogus address
+ * instead so we will die with SIGSEGV.
+ */
+ if (!likely(on_sig_stack(esp - frame_size)))
+ return (void __user *) -1L;
+ }
}
/* Legacy stack switching not supported */
#include <linux/shm.h>
#include <linux/slab.h>
#include <linux/uio.h>
-#include <linux/nfs_fs.h>
+#include <linux/socket.h>
#include <linux/quota.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
#include <linux/poll.h>
#include <linux/eventpoll.h>
#include <linux/personality.h>
if (val == DIE_INIT_MONARCH_LEAVE)
ia64_mca_printk(KERN_NOTICE
"%s: kdump not configured\n",
- __FUNCTION__);
+ __func__);
return NOTIFY_DONE;
}
* a dedicated ITR for the PAL code.
*/
if ((vaddr & mask) == (KERNEL_START & mask)) {
- printk(KERN_INFO "%s: no need to install ITR for "
- "PAL code\n", __FUNCTION__);
+ printk(KERN_INFO "%s: no need to install ITR for PAL code\n",
+ __func__);
continue;
}
return __va(md->phys_addr);
}
printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n",
- __FUNCTION__);
+ __func__);
return NULL;
}
for (i = 0, p = efi_map_start; p < efi_map_end;
++i, p += efi_desc_size)
{
+ const char *unit;
+ unsigned long size;
+
md = p;
- printk("mem%02u: type=%u, attr=0x%lx, "
- "range=[0x%016lx-0x%016lx) (%luMB)\n",
+ size = md->num_pages << EFI_PAGE_SHIFT;
+
+ if ((size >> 40) > 0) {
+ size >>= 40;
+ unit = "TB";
+ } else if ((size >> 30) > 0) {
+ size >>= 30;
+ unit = "GB";
+ } else if ((size >> 20) > 0) {
+ size >>= 20;
+ unit = "MB";
+ } else {
+ size >>= 10;
+ unit = "KB";
+ }
+
+ printk("mem%02d: type=%2u, attr=0x%016lx, "
+ "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
i, md->type, md->attribute, md->phys_addr,
- md->phys_addr + efi_md_size(md),
- md->num_pages >> (20 - EFI_PAGE_SHIFT));
+ md->phys_addr + efi_md_size(md), size, unit);
}
}
#endif
if (cpus_empty(mask))
return;
- if (reassign_irq_vector(irq, first_cpu(mask)))
+ if (irq_prepare_move(irq, first_cpu(mask)))
return;
dest = cpu_physical_id(first_cpu(mask));
struct iosapic_rte_info *rte;
int do_unmask_irq = 0;
+ irq_complete_move(irq);
if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_irq(irq);
{
irq_desc_t *idesc = irq_desc + irq;
+ irq_complete_move(irq);
move_native_irq(irq);
/*
* Once we have recorded IRQ_PENDING already, we can mask the
if (iosapic_intr_info[irq].count) {
new_irq = create_irq();
if (new_irq < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
printk(KERN_INFO "Reassigning vector %d to %d\n",
irq_to_vector(irq), irq_to_vector(new_irq));
memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq],
index = find_iosapic(gsi);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
- __FUNCTION__, gsi);
+ __func__, gsi);
return -ENODEV;
}
rte = iosapic_alloc_rte();
if (!rte) {
printk(KERN_WARNING "%s: cannot allocate memory\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
(info->trigger != trigger || info->polarity != polarity)){
printk (KERN_WARNING
"%s: cannot override the interrupt\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
rte->refcnt++;
if (idesc->chip != &no_irq_type)
printk(KERN_WARNING
"%s: changing vector %d from %s to %s\n",
- __FUNCTION__, irq_to_vector(irq),
+ __func__, irq_to_vector(irq),
idesc->chip->name, irq_type->name);
idesc->chip = irq_type;
}
case ACPI_INTERRUPT_INIT:
irq = create_irq();
if (irq < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
vector = irq_to_vector(irq);
delivery = IOSAPIC_INIT;
break;
mask = 1;
break;
default:
- printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+ printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__,
int_type);
return -1;
}
*/
printk(KERN_INFO
"%s: Disabling PC-AT compatible 8259 interrupts\n",
- __FUNCTION__);
+ __func__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
if (!iosapic_lists[index].addr)
return index;
- printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__);
return -1;
}
index = find_iosapic(gsi_base);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
goto out;
}
if (iosapic_lists[index].rtes_inuse) {
err = -EBUSY;
printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
goto out;
}
index = find_iosapic(gsi_base);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
return;
}
iosapic_lists[index].node = node;
}
#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+#define IA64_IRQ_MOVE_VECTOR IA64_DEF_FIRST_DEVICE_VECTOR
+
static enum vector_domain_type {
VECTOR_DOMAIN_NONE,
VECTOR_DOMAIN_PERCPU
return CPU_MASK_ALL;
}
+static int __irq_prepare_move(int irq, int cpu)
+{
+ struct irq_cfg *cfg = &irq_cfg[irq];
+ int vector;
+ cpumask_t domain;
+
+ if (cfg->move_in_progress || cfg->move_cleanup_count)
+ return -EBUSY;
+ if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
+ return -EINVAL;
+ if (cpu_isset(cpu, cfg->domain))
+ return 0;
+ domain = vector_allocation_domain(cpu);
+ vector = find_unassigned_vector(domain);
+ if (vector < 0)
+ return -ENOSPC;
+ cfg->move_in_progress = 1;
+ cfg->old_domain = cfg->domain;
+ cfg->vector = IRQ_VECTOR_UNASSIGNED;
+ cfg->domain = CPU_MASK_NONE;
+ BUG_ON(__bind_irq_vector(irq, vector, domain));
+ return 0;
+}
+
+int irq_prepare_move(int irq, int cpu)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ ret = __irq_prepare_move(irq, cpu);
+ spin_unlock_irqrestore(&vector_lock, flags);
+ return ret;
+}
+
+void irq_complete_move(unsigned irq)
+{
+ struct irq_cfg *cfg = &irq_cfg[irq];
+ cpumask_t cleanup_mask;
+ int i;
+
+ if (likely(!cfg->move_in_progress))
+ return;
+
+ if (unlikely(cpu_isset(smp_processor_id(), cfg->old_domain)))
+ return;
+
+ cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+ cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+ for_each_cpu_mask(i, cleanup_mask)
+ platform_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
+ cfg->move_in_progress = 0;
+}
+
+static irqreturn_t smp_irq_move_cleanup_interrupt(int irq, void *dev_id)
+{
+ int me = smp_processor_id();
+ ia64_vector vector;
+ unsigned long flags;
+
+ for (vector = IA64_FIRST_DEVICE_VECTOR;
+ vector < IA64_LAST_DEVICE_VECTOR; vector++) {
+ int irq;
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ irq = __get_cpu_var(vector_irq)[vector];
+ if (irq < 0)
+ continue;
+
+ desc = irq_desc + irq;
+ cfg = irq_cfg + irq;
+ spin_lock(&desc->lock);
+ if (!cfg->move_cleanup_count)
+ goto unlock;
+
+ if (!cpu_isset(me, cfg->old_domain))
+ goto unlock;
+
+ spin_lock_irqsave(&vector_lock, flags);
+ __get_cpu_var(vector_irq)[vector] = -1;
+ cpu_clear(me, vector_table[vector]);
+ spin_unlock_irqrestore(&vector_lock, flags);
+ cfg->move_cleanup_count--;
+ unlock:
+ spin_unlock(&desc->lock);
+ }
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq_move_irqaction = {
+ .handler = smp_irq_move_cleanup_interrupt,
+ .flags = IRQF_DISABLED,
+ .name = "irq_move"
+};
+
static int __init parse_vector_domain(char *arg)
{
if (!arg)
spin_unlock_irqrestore(&vector_lock, flags);
}
-static int __reassign_irq_vector(int irq, int cpu)
-{
- struct irq_cfg *cfg = &irq_cfg[irq];
- int vector;
- cpumask_t domain;
-
- if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
- return -EINVAL;
- if (cpu_isset(cpu, cfg->domain))
- return 0;
- domain = vector_allocation_domain(cpu);
- vector = find_unassigned_vector(domain);
- if (vector < 0)
- return -ENOSPC;
- __clear_irq_vector(irq);
- BUG_ON(__bind_irq_vector(irq, vector, domain));
- return 0;
-}
-
-int reassign_irq_vector(int irq, int cpu)
-{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&vector_lock, flags);
- ret = __reassign_irq_vector(irq, cpu);
- spin_unlock_irqrestore(&vector_lock, flags);
- return ret;
-}
-
/*
* Dynamic irq allocate and deallocation for MSI
*/
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d is not mapped "
- "to any IRQ!\n", __FUNCTION__, vector,
+ "to any IRQ!\n", __func__, vector,
smp_processor_id());
} else
generic_handle_irq(irq);
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d not being mapped "
- "to any IRQ!!\n", __FUNCTION__, vector,
+ "to any IRQ!!\n", __func__, vector,
smp_processor_id());
} else {
vectors_in_migration[irq]=0;
register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
+ if (vector_domain_type != VECTOR_DOMAIN_NONE) {
+ BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
+ IA64_FIRST_DEVICE_VECTOR++;
+ register_percpu_irq(IA64_IRQ_MOVE_VECTOR, &irq_move_irqaction);
+ }
+#endif
#endif
#ifdef CONFIG_PERFMON
pfm_init_percpu();
unsigned long ipi_data;
unsigned long phys_cpu_id;
-#ifdef CONFIG_SMP
phys_cpu_id = cpu_physical_id(cpu);
-#else
- phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
-#endif
/*
* cpu number is in 8bit ID and 8bit EID
return 1;
}
-int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
return 1;
}
+/* ia64 does not need this */
+void __kprobes jprobe_return(void)
+{
+}
+
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
IA64_LOG_INDEX_INC(sal_info_type);
IA64_LOG_UNLOCK(sal_info_type);
if (irq_safe) {
- IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. "
- "Record length = %ld\n", __FUNCTION__, sal_info_type, total_len);
+ IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. Record length = %ld\n",
+ __func__, sal_info_type, total_len);
}
*buffer = (u8 *) log_buffer;
return total_len;
static DEFINE_SPINLOCK(cpe_history_lock);
IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
- __FUNCTION__, cpe_irq, smp_processor_id());
+ __func__, cpe_irq, smp_processor_id());
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
}
IA64_MCA_DEBUG("%s: corrected platform error "
- "vector %#x registered\n", __FUNCTION__, cpev);
+ "vector %#x registered\n", __func__, cpev);
}
#endif /* CONFIG_ACPI */
cmcv.cmcv_vector = IA64_CMC_VECTOR;
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x registered.\n",
- __FUNCTION__, smp_processor_id(), IA64_CMC_VECTOR);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x registered.\n",
+ __func__, smp_processor_id(), IA64_CMC_VECTOR);
IA64_MCA_DEBUG("%s: CPU %d CMCV = %#016lx\n",
- __FUNCTION__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
+ __func__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
}
/*
cmcv.cmcv_mask = 1; /* Mask/disable interrupt */
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x disabled.\n",
- __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x disabled.\n",
+ __func__, smp_processor_id(), cmcv.cmcv_vector);
}
/*
cmcv.cmcv_mask = 0; /* Unmask/enable interrupt */
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x enabled.\n",
- __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x enabled.\n",
+ __func__, smp_processor_id(), cmcv.cmcv_vector);
}
/*
local_irq_save(flags);
if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE;
/* Register with the SAL monarch that the slave has
if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
/* Wait for the monarch cpu to exit. */
while (monarch_cpu != -1)
if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
/* Enable all interrupts */
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
if (sos->monarch) {
ia64_mca_wakeup_all();
if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
} else {
while (cpu_isset(cpu, mca_cpu))
cpu_relax(); /* spin until monarch wakes us */
}
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (atomic_dec_return(&mca_count) > 0) {
static DEFINE_SPINLOCK(cmc_history_lock);
IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
- __FUNCTION__, cmc_irq, smp_processor_id());
+ __func__, cmc_irq, smp_processor_id());
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
*/
if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
- __FUNCTION__, cpu);
+ __func__, cpu);
atomic_dec(&slaves);
sos->monarch = 1;
}
*/
if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
- __FUNCTION__, cpu);
+ __func__, cpu);
atomic_dec(&monarchs);
sos->monarch = 0;
}
cpu_relax(); /* spin until monarch enters */
if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
while (monarch_cpu != -1)
cpu_relax(); /* spin until monarch leaves */
if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
mprintk("Slave on cpu %d returning to normal service.\n", cpu);
set_curr_task(cpu, previous_current);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
monarch_cpu = cpu;
if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
/*
* Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be
*/
if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
mprintk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
atomic_dec(&monarchs);
set_curr_task(cpu, previous_current);
.priority = 0/* we need to notified last */
};
- IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: begin\n", __func__);
/* Clear the Rendez checkin flag for all cpus */
for(i = 0 ; i < NR_CPUS; i++)
return;
}
- IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __func__);
ia64_mc_info.imi_mca_handler = ia64_tpa(mca_hldlr_ptr->fp);
/*
return;
}
- IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __FUNCTION__,
+ IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __func__,
ia64_mc_info.imi_mca_handler, ia64_tpa(mca_hldlr_ptr->gp));
/*
ia64_mc_info.imi_slave_init_handler = ia64_tpa(init_hldlr_ptr_slave->fp);
ia64_mc_info.imi_slave_init_handler_size = 0;
- IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__,
+ IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __func__,
ia64_mc_info.imi_monarch_init_handler);
/* Register the os init handler with SAL */
return;
}
- IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __func__);
/*
* Configure the CMCI/P vector and handler. Interrupts for CMC are
cmc_polling_enabled = 0;
schedule_work(&cmc_enable_work);
- IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
#ifdef CONFIG_ACPI
/* Setup the CPEI/P vector and handler */
ia64_cpe_irq = irq;
ia64_mca_register_cpev(cpe_vector);
IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n",
- __FUNCTION__);
+ __func__);
return 0;
}
printk(KERN_ERR "%s: Failed to find irq for CPE "
"interrupt handler, vector %d\n",
- __FUNCTION__, cpe_vector);
+ __func__, cpe_vector);
}
/* If platform doesn't support CPEI, get the timer going. */
if (cpe_poll_enabled) {
ia64_mca_cpe_poll(0UL);
- IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __func__);
}
}
#endif
mod->arch.opd->sh_addralign = 8;
mod->arch.opd->sh_size = fdescs * sizeof(struct fdesc);
DEBUGP("%s: core.plt=%lx, init.plt=%lx, got=%lx, fdesc=%lx\n",
- __FUNCTION__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
+ __func__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
mod->arch.got->sh_size, mod->arch.opd->sh_size);
return 0;
}
#if ARCH_MODULE_DEBUG
if (plt_target(plt) != target_ip) {
printk("%s: mistargeted PLT: wanted %lx, got %lx\n",
- __FUNCTION__, target_ip, plt_target(plt));
+ __func__, target_ip, plt_target(plt));
*okp = 0;
return 0;
}
if (r_type == R_IA64_PCREL21BI) {
if (!is_internal(mod, val)) {
printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n",
- __FUNCTION__, reloc_name[r_type], val);
+ __func__, reloc_name[r_type], val);
return -ENOEXEC;
}
format = RF_INSN21B;
case R_IA64_LDXMOV:
if (gp_addressable(mod, val)) {
/* turn "ld8" into "mov": */
- DEBUGP("%s: patching ld8 at %p to mov\n", __FUNCTION__, location);
+ DEBUGP("%s: patching ld8 at %p to mov\n", __func__, location);
ia64_patch((u64) location, 0x1fff80fe000UL, 0x10000000000UL);
}
return 0;
if (!ok)
return -ENOEXEC;
- DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __FUNCTION__, location, val,
+ DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __func__, location, val,
reloc_name[r_type] ? reloc_name[r_type] : "?", sym->st_value + addend);
switch (format) {
Elf64_Shdr *target_sec;
int ret;
- DEBUGP("%s: applying section %u (%u relocs) to %u\n", __FUNCTION__,
+ DEBUGP("%s: applying section %u (%u relocs) to %u\n", __func__,
relsec, n, sechdrs[relsec].sh_info);
target_sec = sechdrs + sechdrs[relsec].sh_info;
gp = mod->core_size / 2;
gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
mod->arch.gp = gp;
- DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
+ DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
}
for (i = 0; i < n; i++) {
init = start + num_core;
}
- DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __FUNCTION__,
+ DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __func__,
mod->name, mod->arch.gp, num_init, num_core);
/*
if (num_core > 0) {
mod->arch.core_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
core, core + num_core);
- DEBUGP("%s: core: handle=%p [%p-%p)\n", __FUNCTION__,
+ DEBUGP("%s: core: handle=%p [%p-%p)\n", __func__,
mod->arch.core_unw_table, core, core + num_core);
}
if (num_init > 0) {
mod->arch.init_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
init, init + num_init);
- DEBUGP("%s: init: handle=%p [%p-%p)\n", __FUNCTION__,
+ DEBUGP("%s: init: handle=%p [%p-%p)\n", __func__,
mod->arch.init_unw_table, init, init + num_init);
}
}
int
module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
{
- DEBUGP("%s: init: entry=%p\n", __FUNCTION__, mod->init);
+ DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
if (mod->arch.unwind)
register_unwind_table(mod);
return 0;
if (!cpu_online(cpu))
return;
- if (reassign_irq_vector(irq, cpu))
+ if (irq_prepare_move(irq, cpu))
return;
read_msi_msg(irq, &msg);
static void ia64_ack_msi_irq(unsigned int irq)
{
+ irq_complete_move(irq);
move_native_irq(irq);
ia64_eoi();
}
#ifdef PFM_DEBUGGING
#define DPRINT(a) \
do { \
- if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+ if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
} while (0)
#define DPRINT_ovfl(a) \
do { \
- if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+ if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
} while (0)
#endif
#ifdef DEFAULT_DEBUG
#define DPRINT(a) \
do { \
- if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+ if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
} while (0)
#define DPRINT_ovfl(a) \
do { \
- if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+ if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
} while (0)
#else
return 1; /* looks like we've got a winner */
}
-/*
- * GDB apparently wants to be able to read the register-backing store
- * of any thread when attached to a given process. If we are peeking
- * or poking an address that happens to reside in the kernel-backing
- * store of another thread, we need to attach to that thread, because
- * otherwise we end up accessing stale data.
- *
- * task_list_lock must be read-locked before calling this routine!
- */
-static struct task_struct *
-find_thread_for_addr (struct task_struct *child, unsigned long addr)
-{
- struct task_struct *p;
- struct mm_struct *mm;
- struct list_head *this, *next;
- int mm_users;
-
- if (!(mm = get_task_mm(child)))
- return child;
-
- /* -1 because of our get_task_mm(): */
- mm_users = atomic_read(&mm->mm_users) - 1;
- if (mm_users <= 1)
- goto out; /* not multi-threaded */
-
- /*
- * Traverse the current process' children list. Every task that
- * one attaches to becomes a child. And it is only attached children
- * of the debugger that are of interest (ptrace_check_attach checks
- * for this).
- */
- list_for_each_safe(this, next, ¤t->children) {
- p = list_entry(this, struct task_struct, sibling);
- if (p->tgid != child->tgid)
- continue;
- if (thread_matches(p, addr)) {
- child = p;
- goto out;
- }
- }
-
- out:
- mmput(mm);
- return child;
-}
-
/*
* Write f32-f127 back to task->thread.fph if it has been modified.
*/
if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
< IA64_PT_REGS_SIZE) {
dprintk("ptrace.%s: ran off the top of the kernel "
- "stack\n", __FUNCTION__);
+ "stack\n", __func__);
return;
}
if (unw_get_pr (&prev_info, &pr) < 0) {
unw_get_rp(&prev_info, &ip);
dprintk("ptrace.%s: failed to read "
"predicate register (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return;
}
if (unw_is_intr_frame(&info)
access_uarea (struct task_struct *child, unsigned long addr,
unsigned long *data, int write_access)
{
- unsigned long *ptr, regnum, urbs_end, rnat_addr, cfm;
+ unsigned long *ptr, regnum, urbs_end, cfm;
struct switch_stack *sw;
struct pt_regs *pt;
# define pt_reg_addr(pt, reg) ((void *) \
* the kernel was entered.
*
* Furthermore, when changing the contents of
- * PT_AR_BSP (or PT_CFM) we MUST copy any
- * users-level stacked registers that are
- * stored on the kernel stack back to
- * user-space because otherwise, we might end
- * up clobbering kernel stacked registers.
- * Also, if this happens while the task is
- * blocked in a system call, which convert the
- * state such that the non-system-call exit
+ * PT_AR_BSP (or PT_CFM) while the task is
+ * blocked in a system call, convert the state
+ * so that the non-system-call exit
* path is used. This ensures that the proper
* state will be picked up when resuming
* execution. However, it *also* means that
urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
if (write_access) {
if (*data != urbs_end) {
- if (ia64_sync_user_rbs(child, sw,
- pt->ar_bspstore,
- urbs_end) < 0)
- return -1;
if (in_syscall(pt))
convert_to_non_syscall(child,
pt,
urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
if (write_access) {
if (((cfm ^ *data) & PFM_MASK) != 0) {
- if (ia64_sync_user_rbs(child, sw,
- pt->ar_bspstore,
- urbs_end) < 0)
- return -1;
if (in_syscall(pt))
convert_to_non_syscall(child,
pt,
return 0;
case PT_AR_RNAT:
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- rnat_addr = (long) ia64_rse_rnat_addr((long *)
- urbs_end);
- if (write_access)
- return ia64_poke(child, sw, urbs_end,
- rnat_addr, *data);
- else
- return ia64_peek(child, sw, urbs_end,
- rnat_addr, data);
-
+ ptr = pt_reg_addr(pt, ar_rnat);
+ break;
case PT_R1:
ptr = pt_reg_addr(pt, r1);
break;
return ret;
}
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
void
-ptrace_disable (struct task_struct *child)
+user_enable_single_step (struct task_struct *child)
{
struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- /* make sure the single step/taken-branch trap bits are not set: */
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
- child_psr->ss = 0;
- child_psr->tb = 0;
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->ss = 1;
}
-asmlinkage long
-sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data)
+void
+user_enable_block_step (struct task_struct *child)
{
- struct pt_regs *pt;
- unsigned long urbs_end, peek_or_poke;
- struct task_struct *child;
- struct switch_stack *sw;
- long ret;
- struct unw_frame_info info;
+ struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- ret = ptrace_traceme();
- goto out;
- }
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->tb = 1;
+}
- peek_or_poke = (request == PTRACE_PEEKTEXT
- || request == PTRACE_PEEKDATA
- || request == PTRACE_POKETEXT
- || request == PTRACE_POKEDATA);
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- {
- child = find_task_by_pid(pid);
- if (child) {
- if (peek_or_poke)
- child = find_thread_for_addr(child, addr);
- get_task_struct(child);
- }
- }
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
- ret = -EPERM;
- if (pid == 1) /* no messing around with init! */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- if (!ret)
- arch_ptrace_attach(child);
- goto out_tsk;
- }
+void
+user_disable_single_step (struct task_struct *child)
+{
+ struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
+ /* make sure the single step/taken-branch trap bits are not set: */
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->ss = 0;
+ child_psr->tb = 0;
+}
- pt = task_pt_regs(child);
- sw = (struct switch_stack *) (child->thread.ksp + 16);
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable (struct task_struct *child)
+{
+ user_disable_single_step(child);
+}
+long
+arch_ptrace (struct task_struct *child, long request, long addr, long data)
+{
switch (request) {
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
+ case PTRACE_PEEKTEXT:
+ case PTRACE_PEEKDATA:
/* read word at location addr */
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- ret = ia64_peek(child, sw, urbs_end, addr, &data);
- if (ret == 0) {
- ret = data;
- /* ensure "ret" is not mistaken as an error code: */
- force_successful_syscall_return();
- }
- goto out_tsk;
-
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- /* write the word at location addr */
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- ret = ia64_poke(child, sw, urbs_end, addr, data);
-
- /* Make sure user RBS has the latest data */
- unw_init_from_blocked_task(&info, child);
- do_sync_rbs(&info, ia64_sync_user_rbs);
+ if (access_process_vm(child, addr, &data, sizeof(data), 0)
+ != sizeof(data))
+ return -EIO;
+ /* ensure return value is not mistaken for error code */
+ force_successful_syscall_return();
+ return data;
- goto out_tsk;
+ /* PTRACE_POKETEXT and PTRACE_POKEDATA is handled
+ * by the generic ptrace_request().
+ */
- case PTRACE_PEEKUSR:
+ case PTRACE_PEEKUSR:
/* read the word at addr in the USER area */
- if (access_uarea(child, addr, &data, 0) < 0) {
- ret = -EIO;
- goto out_tsk;
- }
- ret = data;
- /* ensure "ret" is not mistaken as an error code */
+ if (access_uarea(child, addr, &data, 0) < 0)
+ return -EIO;
+ /* ensure return value is not mistaken for error code */
force_successful_syscall_return();
- goto out_tsk;
+ return data;
- case PTRACE_POKEUSR:
+ case PTRACE_POKEUSR:
/* write the word at addr in the USER area */
- if (access_uarea(child, addr, &data, 1) < 0) {
- ret = -EIO;
- goto out_tsk;
- }
- ret = 0;
- goto out_tsk;
+ if (access_uarea(child, addr, &data, 1) < 0)
+ return -EIO;
+ return 0;
- case PTRACE_OLD_GETSIGINFO:
+ case PTRACE_OLD_GETSIGINFO:
/* for backwards-compatibility */
- ret = ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
- goto out_tsk;
+ return ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
- case PTRACE_OLD_SETSIGINFO:
+ case PTRACE_OLD_SETSIGINFO:
/* for backwards-compatibility */
- ret = ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
- goto out_tsk;
-
- case PTRACE_SYSCALL:
- /* continue and stop at next (return from) syscall */
- case PTRACE_CONT:
- /* restart after signal. */
- ret = -EIO;
- if (!valid_signal(data))
- goto out_tsk;
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- child->exit_code = data;
+ return ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
- /*
- * Make sure the single step/taken-branch trap bits
- * are not set:
- */
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
- ia64_psr(pt)->ss = 0;
- ia64_psr(pt)->tb = 0;
+ case PTRACE_GETREGS:
+ return ptrace_getregs(child,
+ (struct pt_all_user_regs __user *) data);
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
+ case PTRACE_SETREGS:
+ return ptrace_setregs(child,
+ (struct pt_all_user_regs __user *) data);
- case PTRACE_KILL:
- /*
- * Make the child exit. Best I can do is send it a
- * sigkill. Perhaps it should be put in the status
- * that it wants to exit.
- */
- if (child->exit_state == EXIT_ZOMBIE)
- /* already dead */
- goto out_tsk;
- child->exit_code = SIGKILL;
-
- ptrace_disable(child);
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
-
- case PTRACE_SINGLESTEP:
- /* let child execute for one instruction */
- case PTRACE_SINGLEBLOCK:
- ret = -EIO;
- if (!valid_signal(data))
- goto out_tsk;
-
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
- if (request == PTRACE_SINGLESTEP) {
- ia64_psr(pt)->ss = 1;
- } else {
- ia64_psr(pt)->tb = 1;
- }
- child->exit_code = data;
-
- /* give it a chance to run. */
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
-
- case PTRACE_DETACH:
- /* detach a process that was attached. */
- ret = ptrace_detach(child, data);
- goto out_tsk;
-
- case PTRACE_GETREGS:
- ret = ptrace_getregs(child,
- (struct pt_all_user_regs __user *) data);
- goto out_tsk;
-
- case PTRACE_SETREGS:
- ret = ptrace_setregs(child,
- (struct pt_all_user_regs __user *) data);
- goto out_tsk;
-
- default:
- ret = ptrace_request(child, request, addr, data);
- goto out_tsk;
+ default:
+ return ptrace_request(child, request, addr, data);
}
- out_tsk:
- put_task_struct(child);
- out:
- unlock_kernel();
- return ret;
}
sal_revision = SAL_VERSION_CODE(2, 8);
sal_version = SAL_VERSION_CODE(0, 0);
}
+
+ if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9)))
+ /*
+ * SGI Altix has hard-coded version 2.9 in their prom
+ * but they actually implement 3.2, so let's fix it here.
+ */
+ sal_revision = SAL_VERSION_CODE(3, 2);
}
static void __init
if (overflow++ == 0)
printk(KERN_ERR
"%s: Table overflow. Some processor model information will be missing\n",
- __FUNCTION__);
+ __func__);
return "Unknown";
}
status = ia64_pal_cache_summary(&levels, &unique_caches);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
- __FUNCTION__, status);
+ __func__, status);
max = SMP_CACHE_BYTES;
/* Safest setup for "flush_icache_range()" */
ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
- __FUNCTION__, l, status);
+ __func__, l, status);
max = SMP_CACHE_BYTES;
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
- __FUNCTION__, l, status);
+ __func__, l, status);
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
}
new_sp = scr->pt.r12;
tramp_addr = (unsigned long) __kernel_sigtramp;
- if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
- new_sp = current->sas_ss_sp + current->sas_ss_size;
- /*
- * We need to check for the register stack being on the signal stack
- * separately, because it's switched separately (memory stack is switched
- * in the kernel, register stack is switched in the signal trampoline).
- */
- if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
- new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ int onstack = sas_ss_flags(new_sp);
+
+ if (onstack == 0) {
+ new_sp = current->sas_ss_sp + current->sas_ss_size;
+ /*
+ * We need to check for the register stack being on the
+ * signal stack separately, because it's switched
+ * separately (memory stack is switched in the kernel,
+ * register stack is switched in the signal trampoline).
+ */
+ if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
+ new_rbs = ALIGN(current->sas_ss_sp,
+ sizeof(long));
+ } else if (onstack == SS_ONSTACK) {
+ unsigned long check_sp;
+
+ /*
+ * If we are on the alternate signal stack and would
+ * overflow it, don't. Return an always-bogus address
+ * instead so we will die with SIGSEGV.
+ */
+ check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
+ if (!likely(on_sig_stack(check_sp)))
+ return force_sigsegv_info(sig, (void __user *)
+ check_sp);
+ }
}
frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
#undef DEBUG_UNALIGNED_TRAP
#ifdef DEBUG_UNALIGNED_TRAP
-# define DPRINT(a...) do { printk("%s %u: ", __FUNCTION__, __LINE__); printk (a); } while (0)
+# define DPRINT(a...) do { printk("%s %u: ", __func__, __LINE__); printk (a); } while (0)
# define DDUMP(str,vp,len) dump(str, vp, len)
static void
* just in case.
*/
if (ld.x6_op == 1 || ld.x6_op == 3) {
- printk(KERN_ERR "%s: register update on speculative load, error\n", __FUNCTION__);
+ printk(KERN_ERR "%s: register update on speculative load, error\n", __func__);
if (die_if_kernel("unaligned reference on speculative load with register update\n",
regs, 30))
return;
*/
if (ld.x6_op == 1 || ld.x6_op == 3)
printk(KERN_ERR "%s: register update on speculative load pair, error\n",
- __FUNCTION__);
+ __func__);
setreg(ld.r3, ifa, 0, regs);
}
off = unw.pt_regs_offsets[reg];
if (off < 0) {
- UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __FUNCTION__, reg);
+ UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __func__, reg);
off = 0;
}
return (unsigned long) off;
{
if (!info->pt) {
/* This should not happen with valid unwind info. */
- UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __func__);
if (info->flags & UNW_FLAG_INTERRUPT_FRAME)
info->pt = (unsigned long) ((struct pt_regs *) info->psp - 1);
else
info->pt = info->sp - 16;
}
- UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __FUNCTION__, info->sp, info->pt);
+ UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __func__, info->sp, info->pt);
return (struct pt_regs *) info->pt;
}
return 0;
}
UNW_DPRINT(0, "unwind.%s: trying to access non-existent r%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
{
UNW_DPRINT(0, "unwind.%s: %p outside of regstk "
"[0x%lx-0x%lx)\n",
- __FUNCTION__, (void *) addr,
+ __func__, (void *) addr,
info->regstk.limit,
info->regstk.top);
return -1;
|| (unsigned long) addr >= info->regstk.top)
{
UNW_DPRINT(0, "unwind.%s: ignoring attempt to access register outside "
- "of rbs\n", __FUNCTION__);
+ "of rbs\n", __func__);
return -1;
}
if ((unsigned long) nat_addr >= info->regstk.top)
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else {
*addr = *val;
if (*nat)
default:
UNW_DPRINT(0, "unwind.%s: trying to access non-existent b%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write)
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
else
if ((unsigned) (regnum - 2) >= 126) {
UNW_DPRINT(0, "unwind.%s: trying to access non-existent f%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write)
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
else
default:
UNW_DPRINT(0, "unwind.%s: trying to access non-existent ar%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
} else
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
} else
default:
break;
}
- UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __FUNCTION__, abreg);
+ UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __func__, abreg);
return UNW_REG_LC;
}
return;
}
}
- UNW_DPRINT(0, "unwind.%s: excess spill!\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: excess spill!\n", __func__);
}
static inline void
{
if (abi == 3 && context == 'i') {
sr->flags |= UNW_FLAG_INTERRUPT_FRAME;
- UNW_DPRINT(3, "unwind.%s: interrupt frame\n", __FUNCTION__);
+ UNW_DPRINT(3, "unwind.%s: interrupt frame\n", __func__);
}
else
UNW_DPRINT(0, "unwind%s: ignoring unwabi(abi=0x%x,context=0x%x)\n",
- __FUNCTION__, abi, context);
+ __func__, abi, context);
}
static inline void
{
if (script->count >= UNW_MAX_SCRIPT_LEN) {
UNW_DPRINT(0, "unwind.%s: script exceeds maximum size of %u instructions!\n",
- __FUNCTION__, UNW_MAX_SCRIPT_LEN);
+ __func__, UNW_MAX_SCRIPT_LEN);
return;
}
script->insn[script->count++] = insn;
default:
UNW_DPRINT(0, "unwind.%s: don't know how to emit nat info for where = %u\n",
- __FUNCTION__, r->where);
+ __func__, r->where);
return;
}
insn.opc = opc;
val = offsetof(struct pt_regs, f6) + 16*(rval - 6);
else
UNW_DPRINT(0, "unwind.%s: kernel may not touch f%lu\n",
- __FUNCTION__, rval);
+ __func__, rval);
}
break;
default:
UNW_DPRINT(0, "unwind%s: register %u has unexpected `where' value of %u\n",
- __FUNCTION__, i, r->where);
+ __func__, i, r->where);
break;
}
insn.opc = opc;
r->when = UNW_WHEN_NEVER;
sr.pr_val = info->pr;
- UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __FUNCTION__, ip);
+ UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __func__, ip);
script = script_new(ip);
if (!script) {
- UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n", __func__);
STAT(unw.stat.script.build_time += ia64_get_itc() - start);
return NULL;
}
if (!e) {
/* no info, return default unwinder (leaf proc, no mem stack, no saved regs) */
UNW_DPRINT(1, "unwind.%s: no unwind info for ip=0x%lx (prev ip=0x%lx)\n",
- __FUNCTION__, ip, unw.cache[info->prev_script].ip);
+ __func__, ip, unw.cache[info->prev_script].ip);
sr.curr.reg[UNW_REG_RP].where = UNW_WHERE_BR;
sr.curr.reg[UNW_REG_RP].when = -1;
sr.curr.reg[UNW_REG_RP].val = 0;
sr.curr.reg[UNW_REG_RP].when = -1;
sr.curr.reg[UNW_REG_RP].val = sr.return_link_reg;
UNW_DPRINT(1, "unwind.%s: using default for rp at ip=0x%lx where=%d val=0x%lx\n",
- __FUNCTION__, ip, sr.curr.reg[UNW_REG_RP].where,
+ __func__, ip, sr.curr.reg[UNW_REG_RP].where,
sr.curr.reg[UNW_REG_RP].val);
}
#ifdef UNW_DEBUG
UNW_DPRINT(1, "unwind.%s: state record for func 0x%lx, t=%u:\n",
- __FUNCTION__, table->segment_base + e->start_offset, sr.when_target);
+ __func__, table->segment_base + e->start_offset, sr.when_target);
for (r = sr.curr.reg; r < sr.curr.reg + UNW_NUM_REGS; ++r) {
if (r->where != UNW_WHERE_NONE || r->when != UNW_WHEN_NEVER) {
UNW_DPRINT(1, " %s <- ", unw.preg_name[r - sr.curr.reg]);
} else {
s[dst] = 0;
UNW_DPRINT(0, "unwind.%s: no state->pt, dst=%ld, val=%ld\n",
- __FUNCTION__, dst, val);
+ __func__, dst, val);
}
break;
else {
s[dst] = 0;
UNW_DPRINT(0, "unwind.%s: UNW_INSN_MOVE_CONST bad val=%ld\n",
- __FUNCTION__, val);
+ __func__, val);
}
break;
|| s[val] < TASK_SIZE)
{
UNW_DPRINT(0, "unwind.%s: rejecting bad psp=0x%lx\n",
- __FUNCTION__, s[val]);
+ __func__, s[val]);
break;
}
#endif
if ((info->ip & (local_cpu_data->unimpl_va_mask | 0xf)) || info->ip < TASK_SIZE) {
/* don't let obviously bad addresses pollute the cache */
/* FIXME: should really be level 0 but it occurs too often. KAO */
- UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __FUNCTION__, info->ip);
+ UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __func__, info->ip);
info->rp_loc = NULL;
return -1;
}
spin_unlock_irqrestore(&unw.lock, flags);
UNW_DPRINT(0,
"unwind.%s: failed to locate/build unwind script for ip %lx\n",
- __FUNCTION__, info->ip);
+ __func__, info->ip);
return -1;
}
have_write_lock = 1;
if (!unw_valid(info, info->rp_loc)) {
/* FIXME: should really be level 0 but it occurs too often. KAO */
UNW_DPRINT(1, "unwind.%s: failed to locate return link (ip=0x%lx)!\n",
- __FUNCTION__, info->ip);
+ __func__, info->ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
/* restore the ip */
ip = info->ip = *info->rp_loc;
if (ip < GATE_ADDR) {
- UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __FUNCTION__, ip);
+ UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __func__, ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
/* validate the previous stack frame pointer */
if (!unw_valid(info, info->pfs_loc)) {
- UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __func__);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
num_regs = *info->cfm_loc & 0x7f; /* size of frame */
info->pfs_loc =
(unsigned long *) (info->pt + offsetof(struct pt_regs, ar_pfs));
- UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __FUNCTION__, info->pt);
+ UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __func__, info->pt);
} else
num_regs = (*info->cfm_loc >> 7) & 0x7f; /* size of locals */
info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->bsp, -num_regs);
if (info->bsp < info->regstk.limit || info->bsp > info->regstk.top) {
UNW_DPRINT(0, "unwind.%s: bsp (0x%lx) out of range [0x%lx-0x%lx]\n",
- __FUNCTION__, info->bsp, info->regstk.limit, info->regstk.top);
+ __func__, info->bsp, info->regstk.limit, info->regstk.top);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
info->sp = info->psp;
if (info->sp < info->memstk.top || info->sp > info->memstk.limit) {
UNW_DPRINT(0, "unwind.%s: sp (0x%lx) out of range [0x%lx-0x%lx]\n",
- __FUNCTION__, info->sp, info->memstk.top, info->memstk.limit);
+ __func__, info->sp, info->memstk.top, info->memstk.limit);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
if (info->ip == prev_ip && info->sp == prev_sp && info->bsp == prev_bsp) {
UNW_DPRINT(0, "unwind.%s: ip, sp, bsp unchanged; stopping here (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
if ((long)((unsigned long)info->task + IA64_STK_OFFSET - sp)
< IA64_PT_REGS_SIZE) {
UNW_DPRINT(0, "unwind.%s: ran off the top of the kernel stack\n",
- __FUNCTION__);
+ __func__);
break;
}
if (unw_is_intr_frame(info) &&
unw_get_rp(info, &ip);
UNW_DPRINT(0, "unwind.%s: failed to read "
"predicate register (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return -1;
}
} while (unw_unwind(info) >= 0);
unw_get_ip(info, &ip);
UNW_DPRINT(0, "unwind.%s: failed to unwind to user-level (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return -1;
}
EXPORT_SYMBOL(unw_unwind_to_user);
" pr 0x%lx\n"
" sw 0x%lx\n"
" sp 0x%lx\n",
- __FUNCTION__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
+ __func__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
info->pr, (unsigned long) info->sw, info->sp);
STAT(unw.stat.api.init_time += ia64_get_itc() - start; local_irq_restore(flags));
}
" bsp 0x%lx\n"
" sol 0x%lx\n"
" ip 0x%lx\n",
- __FUNCTION__, info->bsp, sol, info->ip);
+ __func__, info->bsp, sol, info->ip);
find_save_locs(info);
}
{
struct switch_stack *sw = (struct switch_stack *) (t->thread.ksp + 16);
- UNW_DPRINT(1, "unwind.%s\n", __FUNCTION__);
+ UNW_DPRINT(1, "unwind.%s\n", __func__);
unw_init_frame_info(info, t, sw);
}
EXPORT_SYMBOL(unw_init_from_blocked_task);
if (end - start <= 0) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to insert empty unwind table\n",
- __FUNCTION__);
+ __func__);
return NULL;
}
if (!handle) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to remove non-existent unwind table\n",
- __FUNCTION__);
+ __func__);
return;
}
table = handle;
if (table == &unw.kernel_table) {
UNW_DPRINT(0, "unwind.%s: sorry, freeing the kernel's unwind table is a "
- "no-can-do!\n", __FUNCTION__);
+ "no-can-do!\n", __func__);
return;
}
break;
if (!prev) {
UNW_DPRINT(0, "unwind.%s: failed to find unwind table %p\n",
- __FUNCTION__, (void *) table);
+ __func__, (void *) table);
spin_unlock_irqrestore(&unw.lock, flags);
return;
}
}
if (!punw) {
- printk("%s: failed to find gate DSO's unwind table!\n", __FUNCTION__);
+ printk("%s: failed to find gate DSO's unwind table!\n", __func__);
return 0;
}
unw.gate_table = kmalloc(size, GFP_KERNEL);
if (!unw.gate_table) {
unw.gate_table_size = 0;
- printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __FUNCTION__);
+ printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __func__);
return 0;
}
unw.gate_table_size = size;
if (!user_mode(regs)) {
/* kprobe_running() needs smp_processor_id() */
preempt_disable();
- if (kprobe_running() && kprobes_fault_handler(regs, trap))
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
ret = 1;
preempt_enable();
}
if (ret)
printk("%s: Problem encountered in __add_pages() as ret=%d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
status = ia64_pal_cache_summary(&levels, &unique_caches);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed "
- "(status=%ld)\n", __FUNCTION__, status);
+ "(status=%ld)\n", __func__, status);
return;
}
/* cache_type (data_or_unified)= */ 2, &cci);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed "
- "(status=%ld)\n", __FUNCTION__, status);
+ "(status=%ld)\n", __func__, status);
return;
}
pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
- panic("%s: Fatal %s Error", __FUNCTION__,
+ panic("%s: Fatal %s Error", __func__,
((nasid & 1) ? "TIO" : "HUBII"));
if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
- panic("%s: Fatal TIO Error", __FUNCTION__);
+ panic("%s: Fatal TIO Error", __func__);
} else
bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: "
"acpi_get_vendor_resource() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return NULL;
sizeof(struct pcibus_bussoft *)) {
printk(KERN_ERR
"%s: Invalid vendor data length %d\n",
- __FUNCTION__, vendor->byte_length);
+ __func__, vendor->byte_length);
kfree(buffer.pointer);
return NULL;
}
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: acpi_get_vendor_resource() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return 1;
sizeof(struct pci_devdev_info *)) {
printk(KERN_ERR
"%s: Invalid vendor data length: %d for: ",
- __FUNCTION__, vendor->byte_length);
+ __func__, vendor->byte_length);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
ret = 1;
pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
if (!pcidev_ptr)
- panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for pcidev_info", __func__);
memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
pcidev_prom_ptr = __va(addr);
/* Get the IRQ info */
irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
if (!irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for sn_irq_info", __func__);
if (pcidev_ptr->pdi_sn_irq_info) {
irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
status = acpi_get_parent(child, &parent);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: acpi_get_parent() failed "
- "(0x%x) for: ", __FUNCTION__, status);
+ "(0x%x) for: ", __func__, status);
acpi_ns_print_node_pathname(child, NULL);
printk("\n");
- panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ panic("%s: Unable to find host devfn\n", __func__);
}
if (parent == rootbus_handle)
break;
}
if (!child) {
printk(KERN_ERR "%s: Unable to find root bus for: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(device_handle, NULL);
printk("\n");
BUG();
status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(child, NULL);
printk("\n");
- panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ panic("%s: Unable to find host devfn\n", __func__);
}
slot = (adr >> 16) & 0xffff;
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: acpi_get_parent() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return AE_OK;
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: Failed to find _BBN in parent of: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return AE_OK;
if (segment != pci_domain_nr(dev)) {
printk(KERN_ERR
"%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
- __FUNCTION__, segment, pci_domain_nr(dev));
+ __func__, segment, pci_domain_nr(dev));
acpi_ns_print_node_pathname(rootbus_handle, NULL);
printk("\n");
return 1;
}
} else {
printk(KERN_ERR "%s: Unable to get __SEG from: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(rootbus_handle, NULL);
printk("\n");
return 1;
if (!pcidev_match.handle) {
printk(KERN_ERR
"%s: Could not find matching ACPI device for %s.\n",
- __FUNCTION__, pci_name(dev));
+ __func__, pci_name(dev));
return 1;
}
if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
panic("%s: Failure obtaining pcidev_info for %s\n",
- __FUNCTION__, pci_name(dev));
+ __func__, pci_name(dev));
}
if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
printk(KERN_ERR
"%s: 0x%04x:0x%02x Unable to "
"obtain prom_bussoft_ptr\n",
- __FUNCTION__, pci_domain_nr(bus), bus->number);
+ __func__, pci_domain_nr(bus), bus->number);
return;
}
sn_common_bus_fixup(bus, prom_bussoft_ptr);
element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
if (!element) {
- dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
+ dev_dbg(&dev->dev, "%s: out of memory!\n", __func__);
return;
}
element->sysdata = SN_PCIDEV_INFO(dev);
pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
if (!pcidev_info)
- panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for pcidev_info", __func__);
sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
if (!sn_irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for sn_irq_info", __func__);
/* Call to retrieve pci device information needed by kernel. */
status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
if (!newbuf) {
mutex_unlock(&sn_oemdata_mutex);
printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
- __FUNCTION__);
+ __func__);
return 1;
}
vfree(*sn_oemdata);
*dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
SN_DMA_ADDR_PHYS);
if (!*dma_handle) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
free_pages((unsigned long)cpuaddr, get_order(size));
return NULL;
}
phys_addr = __pa(cpu_addr);
dma_addr = provider->dma_map(pdev, phys_addr, size, SN_DMA_ADDR_PHYS);
if (!dma_addr) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
return 0;
}
return dma_addr;
SN_DMA_ADDR_PHYS);
if (!sg->dma_address) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
/*
* Free any successfully allocated entries.
break;
default:
printk(KERN_ERR "%s: Invalid CA_APERATURE_SIZE "
- "0x%lx\n", __FUNCTION__, (ulong) CA_APERATURE_SIZE);
+ "0x%lx\n", __func__, (ulong) CA_APERATURE_SIZE);
return -1;
}
if (!tmp) {
printk(KERN_ERR "%s: Could not allocate "
"%lu bytes (order %d) for GART\n",
- __FUNCTION__,
+ __func__,
tioca_kern->ca_gart_size,
get_order(tioca_kern->ca_gart_size));
return -ENOMEM;
if (node_upper > 64) {
printk(KERN_ERR "%s: coretalk addr 0x%p node id out "
- "of range\n", __FUNCTION__, (void *)ct_addr);
+ "of range\n", __func__, (void *)ct_addr);
return 0;
}
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
- __FUNCTION__,
+ __func__,
node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
return 0;
}
if (is_shub1() && sn_sal_rev() < 0x0406) {
printk
(KERN_ERR "%s: SGI prom rev 4.06 or greater required "
- "for tioca support\n", __FUNCTION__);
+ "for tioca support\n", __func__);
return NULL;
}
printk(KERN_WARNING
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for TIOCA bus %d\n",
- __FUNCTION__, SGI_TIOCA_ERROR,
+ __func__, SGI_TIOCA_ERROR,
(int)tioca_common->ca_common.bs_persist_busnum);
sn_set_err_irq_affinity(SGI_TIOCA_ERROR);
if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
printk(KERN_WARNING
"%s: %s - no map found for bus_addr 0x%lx\n",
- __FUNCTION__, pci_name(pdev), bus_addr);
+ __func__, pci_name(pdev), bus_addr);
} else if (--map->refcnt == 0) {
for (i = 0; i < map->ate_count; i++) {
map->ate_shadow[i] = 0;
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for "
"TIOCE bus %04x:%02x\n",
- __FUNCTION__, SGI_PCIASIC_ERROR,
+ __func__, SGI_PCIASIC_ERROR,
tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum);
.long sys_epoll_pwait /* 315 */
.long sys_utimensat
.long sys_signalfd
- .long sys_ni_syscall
+ .long sys_timerfd_create
.long sys_eventfd
.long sys_fallocate /* 320 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 13:17:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Feb 25 15:03:00 2008
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
CONFIG_TIME_LOW_RES=y
CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# Processor type and features
# CONFIG_MOD5272 is not set
CONFIG_FREESCALE=y
CONFIG_4KSTACKS=y
+CONFIG_HZ=100
#
# RAM configuration
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
#
# Executable file formats
#
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
+CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_COLDFIRE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
#
# Sound
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
#
# Userspace I/O
#
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
# CONFIG_BOOTPARAM is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
#
.long sys_epoll_pwait /* 315 */
.long sys_utimensat
.long sys_signalfd
- .long sys_ni_syscall
+ .long sys_timerfd_create
.long sys_eventfd
.long sys_fallocate /* 320 */
+ .long sys_timerfd_settime
+ .long sys_timerfd_gettime
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
/***************************************************************************/
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
- /* Reset Timer1 */
- TSTAT &= 0;
-
- return arch_timer_interrupt(irq, dummy);
-}
-
-/***************************************************************************/
-
static struct irqaction m68328_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config EARLY_PRINTK
bool
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
- /* IDSEL 0x01 (PCI-X slot) */
- 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ /* IDSEL 0x01 (PCI-X slot) @66MHz */
+ 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
interrupts = <0x18 0x2>;
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
-ep88xc|ep405|redboot*|ep8248e)
+ep88xc|ep405|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;
+adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:18 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-# CONFIG_PPC_85xx is not set
-CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# Platform support
-#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
-CONFIG_PPC_ADDER875=y
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_8XX_MINIMAL_FPEMU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-uboot.dts"
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_FS_ENET=y
-# CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:38 2008
+# Linux kernel version: 2.6.25-rc2
+# Wed Feb 20 12:26:07 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-redboot.dts"
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ stw r10, 0(r11)
+4:
+#else
ori r10, r10, _PAGE_ACCESSED
stw r10, 0(r11)
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21, 22 and 28 must be clear.
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
ori r10, r10, _PAGE_ACCESSED
+4:
+ /* and update pte in table */
+#else
+ ori r10, r10, _PAGE_ACCESSED
+#endif
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
stw r10, 0(r11)
/* The Linux PTE won't go exactly into the MMU TLB.
/* Update 'changed', among others.
*/
+#ifdef CONFIG_SWAP
+ ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+#else
ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
mfspr r11, SPRN_MD_TWC /* Get pte address again */
stw r10, 0(r11) /* and update pte in table */
if (ret)
return ret;
/* Map BCSR area */
- np = of_find_node_by_name(NULL, "bcsr");
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
if (np) {
- struct resource res;
-
- of_address_to_resource(np, 0, &res);
- bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+ bcsr_regs = of_iomap(np, 0);
of_node_put(np);
}
if (!bcsr_regs)
static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
select FSL_SOC
select MPC83xx
select IPIC
- select FSL_EMB_PERFMON
config PPC_86xx
bool "Freescale 86xx"
default y
config FSL_EMB_PERFMON
- bool
+ bool "Freescale Embedded Perfmon"
+ depends on E500 || PPC_83xx
+ help
+ This is the Performance Monitor support found on the e500 core
+ and some e300 cores (c3 and c4). Select this only if your
+ core supports the Embedded Performance Monitor APU
config PTE_64BIT
bool
}
/* Validate some of the fields */
- if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+ if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
printk(KERN_ERR "qe-firmware: invalid data\n");
return -EINVAL;
}
* If we haven't checked yet, and a driver hasn't uploaded a firmware
* yet, then check the device tree for information.
*/
- if (initialized || qe_firmware_uploaded)
+ if (qe_firmware_uploaded)
+ return &qe_firmware_info;
+
+ if (initialized)
return NULL;
initialized = 1;
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ stw r10, 0(r11)
+4:
+#else
ori r10, r10, _PAGE_ACCESSED
stw r10, 0(r11)
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21, 22 and 28 must be clear.
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+ /* and update pte in table */
+#else
ori r10, r10, _PAGE_ACCESSED
+#endif
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
stw r10, 0(r11)
/* The Linux PTE won't go exactly into the MMU TLB.
/* Update 'changed', among others.
*/
+#ifdef CONFIG_SWAP
+ ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+#else
ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
mfspr r11, SPRN_MD_TWC /* Get pte address again */
stw r10, 0(r11) /* and update pte in table */
def_bool y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
source "init/Kconfig"
source "fs/Kconfig.binfmt"
+config FORCE_MAX_ZONEORDER
+ int
+ default "9"
+
config PROCESS_DEBUG
bool "Show crashed user process info"
help
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sat Feb 9 12:13:01 2008
+# Linux kernel version: 2.6.25-rc4
+# Wed Mar 5 11:22:59 2008
#
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CPUSETS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
#
# Sonics Silicon Backplane
#
+# CONFIG_MEMSTICK is not set
#
# File systems
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
+# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
EXTRA_AFLAGS := -traditional
+#
+# Passing null pointers is ok for smp code, since we access the lowcore here.
+#
+CFLAGS_smp.o := -Wno-nonnull
+
obj-y := bitmap.o traps.o time.o process.o base.o early.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
__cpcmd(defsys_cmd, NULL, 0, &response);
- if (response != 0)
+ if (response != 0) {
+ kernel_nss_name[0] = '\0';
return;
+ }
__cpcmd(savesys_cmd, NULL, 0, &response);
- if (response != strlen(savesys_cmd))
+ if (response != strlen(savesys_cmd)) {
+ kernel_nss_name[0] = '\0';
return;
+ }
ipl_flags = IPL_NSS_VALID;
}
default:
break;
}
+ disabled_wait((unsigned long) __builtin_return_address(0));
}
static void __init reipl_probe(void)
local_mcck_disable();
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
+ /* disable monitor call class 0 */
+ __ctl_clear_bit(8, 15);
+ atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
+ hcpu);
local_irq_enable();
s390_handle_mcck();
return;
panic_stack = __get_free_page(GFP_KERNEL);
if (!panic_stack || !async_stack)
goto out;
- /*
- * Only need to copy the first 512 bytes from address 0. But since
- * the compiler emits a warning if src == NULL for memcpy use copy_page
- * instead. Copies more than needed but this code is not performance
- * critical.
- */
- copy_page(lowcore, &S390_lowcore);
- memset((void *)lowcore + 512, 0, sizeof(*lowcore) - 512);
+ memcpy(lowcore, &S390_lowcore, 512);
+ memset((char *)lowcore + 512, 0, sizeof(*lowcore) - 512);
lowcore->async_stack = async_stack + ASYNC_SIZE;
lowcore->panic_stack = panic_stack + PAGE_SIZE;
*/
static void start_hz_timer(void)
{
- BUG_ON(!in_interrupt());
-
if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
return;
account_ticks(get_clock());
This includes both the OEM SecureEdge products as well as the
SME product line.
-config SH_7710VOIPGW
- bool "SH7710-VOIP-GW"
- depends on CPU_SUBTYPE_SH7710
- help
- Select this option to build a kernel for the SH7710 based
- VOIP GW.
-
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
machdir-$(CONFIG_SH_MIGOR) += renesas/migor
machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780
-machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
machdir-$(CONFIG_SH_LANDISK) += landisk
* bios-less APM driver for hp680
*
* Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License.
#include <asm/adc.h>
#include <asm/hp6xx.h>
-#define SH7709_PGDR 0xa400012c
-
+/* percentage values */
#define APM_CRITICAL 10
#define APM_LOW 30
+/* resonably sane values */
#define HP680_BATTERY_MAX 898
#define HP680_BATTERY_MIN 486
#define HP680_BATTERY_AC_ON 1023
#define MODNAME "hp6x0_apm"
+#define PGDR 0xa400012c
+
static void hp6x0_apm_get_power_status(struct apm_power_info *info)
{
int battery, backup, charging, percentage;
percentage = 100 * (battery - HP680_BATTERY_MIN) /
(HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+ /* % of full battery */
+ info->battery_life = percentage;
+
+ /* We want our estimates in minutes */
+ info->units = 0;
+
+ /* Extremely(!!) rough estimate, we will replace this with a datalist later on */
+ info->time = (2 * battery);
+
info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
APM_AC_ONLINE : APM_AC_OFFLINE;
- pgdr = ctrl_inb(SH7709_PGDR);
+ pgdr = ctrl_inb(PGDR);
if (pgdr & PGDR_MAIN_BATTERY_OUT) {
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
info->battery_flag = 0x80;
} else if (charging < 8) {
info->battery_status = APM_BATTERY_STATUS_CHARGING;
info->battery_flag = 0x08;
- info->ac_line_status = 0xff;
+ info->ac_line_status = 0x01;
} else if (percentage <= APM_CRITICAL) {
info->battery_status = APM_BATTERY_STATUS_CRITICAL;
info->battery_flag = 0x04;
info->battery_status = APM_BATTERY_STATUS_HIGH;
info->battery_flag = 0x01;
}
-
- info->units = 0;
}
static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-/*
- * Renesas Technology SH7710 VoIP Gateway
- *
- * Copyright (C) 2006 Ranjit Deshpande
- * Kenati Technologies Inc.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct ipr_data sh7710voipgw_ipr_map[] = {
- { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },
- { WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY },
-
- /* SCIF0 */
- { SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-
- /* DMAC-1 */
- { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-
- /* DMAC-2 */
- { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
- { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
- /* IPSEC */
- { IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY },
-
- /* EDMAC */
- { EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY },
- { EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY },
- { EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY },
-
- /* SIOF0 */
- { SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
- /* SIOF1 */
- { SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-
- /* SLIC IRQ's */
- { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
- { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7710voipgw_init_irq(void)
-{
- /* Disable all interrupts in IPR registers */
- ctrl_outw(0x0, INTC_IPRA);
- ctrl_outw(0x0, INTC_IPRB);
- ctrl_outw(0x0, INTC_IPRC);
- ctrl_outw(0x0, INTC_IPRD);
- ctrl_outw(0x0, INTC_IPRE);
- ctrl_outw(0x0, INTC_IPRF);
- ctrl_outw(0x0, INTC_IPRG);
- ctrl_outw(0x0, INTC_IPRH);
- ctrl_outw(0x0, INTC_IPRI);
-
- /* Ack all interrupt sources in the IRR0 register */
- ctrl_outb(0x3f, INTC_IRR0);
-
- /* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable
- * IRL mode.
- */
- ctrl_outw(0x2aa, INTC_ICR1);
-
- make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map));
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7710voipgw __initmv = {
- .mv_name = "SH7710 VoIP Gateway",
- .mv_nr_irqs = 104,
- .mv_init_irq = sh7710voipgw_init_irq,
-};
shift = mk_ilsel_shift(bit);
pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
- __FUNCTION__, bit, addr, shift, set);
+ __func__, bit, addr, shift, set);
tmp = ctrl_inw(addr);
tmp &= ~(0xf << shift);
* safe default.
*/
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __FUNCTION__, offset);
+ __func__, offset);
result = PVR;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Tue Nov 13 20:32:39 2007
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar 6 15:39:59 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_32BIT is not set
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# Board support
#
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_SDK7780 is not set
CONFIG_SH_HIGHLANDER=y
# CONFIG_SH_R7780RP is not set
CONFIG_SH_R7780MP=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 15 14:06:20 2007
+# Linux kernel version: 2.6.25-rc3
+# Thu Feb 28 10:18:04 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+# CONFIG_SH_SDK7780 is not set
+# CONFIG_SH_HIGHLANDER is not set
#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SMP is not set
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00810000
-# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
#
# Bus options
#
+# CONFIG_CF_ENABLER is not set
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
#
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
#
# USB Imaging devices
#
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
+CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
# Security options
#
# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 12:48:56 2006
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar 6 16:02:29 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-CONFIG_SH_7710VOIPGW=y
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
CONFIG_CPU_SUBTYPE_SH7710=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
CONFIG_SH_DSP=y
# CONFIG_SH_ADC is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
#
-# Timer support
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=32768000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_PPTP=m
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
# CONFIG_IP_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=y
#
# Classification
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
CONFIG_PHONE=y
-# CONFIG_PHONE_IXJ is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
* and cache configuration in detect_cpu_and_cache_system().
*/
-asmlinkage void __cpuinit sh_cpu_init(void)
+asmlinkage void __init sh_cpu_init(void)
{
current_thread_info()->cpu = hard_smp_processor_id();
if (unlikely(!map)) {
printk("%s: bad store queue address 0x%08lx\n",
- __FUNCTION__, vaddr);
+ __func__, vaddr);
return;
}
vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
if (!vma) {
printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __FUNCTION__, map->sq_addr);
+ __func__, map->sq_addr);
return;
}
}
if (dest >= 63) {
printk(KERN_NOTICE "%s: Invalid dest reg %d "
"specified in movi handler. Failed "
- "opcode was 0x%lx: ", __FUNCTION__,
+ "opcode was 0x%lx: ", __func__,
dest, op);
continue;
#endif
static DEFINE_SPINLOCK(trapped_lock);
-int __init register_trapped_io(struct trapped_io *tiop)
+int register_trapped_io(struct trapped_io *tiop)
{
struct resource *res;
unsigned long len = 0, flags = 0;
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
-#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__))
+#if (__GNUC_MINOR__ >= 2 || defined(__GNUC_STM_RELEASE__))
/*
- * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST
+ * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
* compiler which include backported patches.
*/
DECLARE_EXPORT(__sdivsi3_i4i);
EXPORT_SYMBOL(csum_ipv6_magic);
#endif
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_ebss);
EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__udelay);
count -= LATCH;
} else {
printk("%s (): hardware timer problem?\n",
- __FUNCTION__);
+ __func__);
}
}
} else
count -= LATCH;
} else {
printk("%s (): hardware timer problem?\n",
- __FUNCTION__);
+ __func__);
}
}
} else
ret = register_cpu(&per_cpu(cpu_devices, i), i);
if (unlikely(ret))
printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
- __FUNCTION__, i, ret);
+ __func__, i, ret);
}
#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
/* Called with interrupts disabled */
asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
{
- show_excp_regs(__FUNCTION__, -1, -1, regs);
+ show_excp_regs(__func__, -1, -1, regs);
die_if_kernel("exception", regs, ex);
}
result = (result & 0xffffffff) + (result >> 32);
pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n",
- __FUNCTION__, saddr, daddr, len, proto, sum, result);
+ __func__, saddr, daddr, len, proto, sum, result);
return (__wsum)result;
}
* a 1GHz box, that's about 2 seconds.
*/
-void __delay(int loops)
+void __delay(unsigned long loops)
{
long long dummy;
__asm__ __volatile__("gettr tr0, %1\n\t"
:"0"(loops));
}
-void __udelay(unsigned long long usecs, unsigned long lpj)
+inline void __const_udelay(unsigned long xloops)
{
- usecs *= (((unsigned long long) HZ << 32) / 1000000) * lpj;
- __delay((long long) usecs >> 32);
+ __delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
}
-void __ndelay(unsigned long long nsecs, unsigned long lpj)
+void __udelay(unsigned long usecs)
{
- nsecs *= (((unsigned long long) HZ << 32) / 1000000000) * lpj;
- __delay((long long) nsecs >> 32);
+ __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
}
-void udelay(unsigned long usecs)
+void __ndelay(unsigned long nsecs)
{
- __udelay(usecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
-}
-
-void ndelay(unsigned long nsecs)
-{
- __ndelay(nsecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
+ __const_udelay(nsecs * 0x00000005);
}
config PMB
bool "Support 32-bit physical addressing through PMB"
- depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+ depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
select 32BIT
default y
help
/* We only have ZONE_NORMAL, so this is easy.. */
ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages);
if (unlikely(ret))
- printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret);
+ printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
return ret;
}
p = remove_vm_area((void *)(vaddr & PAGE_MASK));
if (!p) {
- printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr);
+ printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
return;
}
} else {
if (!printed_full) {
printk("%s: done with statics, switching to kmalloc\n",
- __FUNCTION__);
+ __func__);
printed_full = 1;
}
tlen = strlen(name);
res = shmedia_find_resource(&shmedia_iomap, vaddr);
if (!res) {
printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
- __FUNCTION__, vaddr);
+ __func__, vaddr);
return;
}
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/threads.h>
+#include <linux/fs.h>
#include <asm/addrspace.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#endif
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#endif
R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
-7710VOIPGW SH_7710VOIPGW
LBOXRE2 SH_LBOX_RE2
X3PROTO SH_X3PROTO
MAGICPANELR2 SH_MAGIC_PANEL_R2
-# $Id: Makefile,v 1.62 2000/12/15 00:41:17 davem Exp $
+#
# Makefile for the linux kernel.
#
sys_sparc.o sunos_asm.o systbls.o \
time.o windows.o cpu.o devices.o sclow.o \
tadpole.o tick14.o ptrace.o sys_solaris.o \
- unaligned.o muldiv.o semaphore.o prom.o of_device.o devres.o
+ unaligned.o una_asm.o muldiv.o semaphore.o \
+ prom.o of_device.o devres.o
devres-y = ../../../kernel/irq/devres.o
/* In order to get the fpu type correct, you need to take the IDPROM's
* machine type value into consideration too. I will fix this.
*/
-struct cpu_fp_info linux_sparc_fpu[] = {
+static struct cpu_fp_info linux_sparc_fpu[] = {
{ 0, 0, "Fujitsu MB86910 or Weitek WTL1164/5"},
{ 0, 1, "Fujitsu MB86911 or Weitek WTL1164/5 or LSI L64831"},
{ 0, 2, "LSI Logic L64802 or Texas Instruments ACT8847"},
#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu)
-struct cpu_iu_info linux_sparc_chips[] = {
+static struct cpu_iu_info linux_sparc_chips[] = {
/* Sun4/100, 4/200, SLC */
{ 0, 0, "Fujitsu MB86900/1A or LSI L64831 SparcKIT-40"},
/* borned STP1012PGA */
prom_printf("UGH: property for %s was %d, need < %d\n",
dev->prom_node->name, len,
dev->parent->num_addrs);
- panic(__FUNCTION__);
+ panic(__func__);
}
/* XXX resource */
prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
dev->prom_node->name, len,
(int)sizeof(struct linux_prom_registers));
- panic(__FUNCTION__);
+ panic(__func__);
}
dev->num_addrs = len / sizeof(struct linux_prom_registers);
regs = of_get_property(dp, "reg", &len);
if (!regs) {
prom_printf("%s: can't find reg property\n",
- __FUNCTION__);
+ __func__);
prom_halt();
}
nreg = len / sizeof(struct linux_prom_pci_registers);
#endif
-extern char reboot_command [];
-
/* XXX cli/sti -> local_irq_xxx here, check this works once SMP is fixed. */
void machine_halt(void)
{
--- /dev/null
+/* una_asm.S: Kernel unaligned trap assembler helpers.
+ *
+ * Copyright (C) 1996,2005,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#include <linux/errno.h>
+
+ .text
+
+retl_efault:
+ retl
+ mov -EFAULT, %o0
+
+ /* int __do_int_store(unsigned long *dst_addr, int size,
+ * unsigned long *src_val)
+ *
+ * %o0 = dest_addr
+ * %o1 = size
+ * %o2 = src_val
+ *
+ * Return '0' on success, -EFAULT on failure.
+ */
+ .globl __do_int_store
+__do_int_store:
+ ld [%o2], %g1
+ cmp %1, 2
+ be 2f
+ cmp %1, 4
+ be 1f
+ srl %g1, 24, %g2
+ srl %g1, 16, %g7
+4: stb %g2, [%o0]
+ srl %g1, 8, %g2
+5: stb %g7, [%o0 + 1]
+ ld [%o2 + 4], %g7
+6: stb %g2, [%o0 + 2]
+ srl %g7, 24, %g2
+7: stb %g1, [%o0 + 3]
+ srl %g7, 16, %g1
+8: stb %g2, [%o0 + 4]
+ srl %g7, 8, %g2
+9: stb %g1, [%o0 + 5]
+10: stb %g2, [%o0 + 6]
+ b 0f
+11: stb %g7, [%o0 + 7]
+1: srl %g1, 16, %g7
+12: stb %g2, [%o0]
+ srl %g1, 8, %g2
+13: stb %g7, [%o0 + 1]
+14: stb %g2, [%o0 + 2]
+ b 0f
+15: stb %g1, [%o0 + 3]
+2: srl %g1, 8, %g2
+16: stb %g2, [%o0]
+17: stb %g1, [%o0 + 1]
+0: retl
+ mov 0, %o0
+
+ .section __ex_table,#alloc
+ .word 4b, retl_efault
+ .word 5b, retl_efault
+ .word 6b, retl_efault
+ .word 7b, retl_efault
+ .word 8b, retl_efault
+ .word 9b, retl_efault
+ .word 10b, retl_efault
+ .word 11b, retl_efault
+ .word 12b, retl_efault
+ .word 13b, retl_efault
+ .word 14b, retl_efault
+ .word 15b, retl_efault
+ .word 16b, retl_efault
+ .word 17b, retl_efault
+ .previous
+
+ /* int do_int_load(unsigned long *dest_reg, int size,
+ * unsigned long *saddr, int is_signed)
+ *
+ * %o0 = dest_reg
+ * %o1 = size
+ * %o2 = saddr
+ * %o3 = is_signed
+ *
+ * Return '0' on success, -EFAULT on failure.
+ */
+ .globl do_int_load
+do_int_load:
+ cmp %o1, 8
+ be 9f
+ cmp %o1, 4
+ be 6f
+4: ldub [%o2], %g1
+5: ldub [%o2 + 1], %g2
+ sll %g1, 8, %g1
+ tst %o3
+ be 3f
+ or %g1, %g2, %g1
+ sll %g1, 16, %g1
+ sra %g1, 16, %g1
+3: b 0f
+ st %g1, [%o0]
+6: ldub [%o2 + 1], %g2
+ sll %g1, 24, %g1
+7: ldub [%o2 + 2], %g7
+ sll %g2, 16, %g2
+8: ldub [%o2 + 3], %g3
+ sll %g7, 8, %g7
+ or %g3, %g2, %g3
+ or %g7, %g3, %g7
+ or %g1, %g7, %g1
+ b 0f
+ st %g1, [%o0]
+9: ldub [%o2], %g1
+10: ldub [%o2 + 1], %g2
+ sll %g1, 24, %g1
+11: ldub [%o2 + 2], %g7
+ sll %g2, 16, %g2
+12: ldub [%o2 + 3], %g3
+ sll %g7, 8, %g7
+ or %g1, %g2, %g1
+ or %g7, %g3, %g7
+ or %g1, %g7, %g7
+13: ldub [%o2 + 4], %g1
+ st %g7, [%o0]
+14: ldub [%o2 + 5], %g2
+ sll %g1, 24, %g1
+15: ldub [%o2 + 6], %g7
+ sll %g2, 16, %g2
+16: ldub [%o2 + 7], %g3
+ sll %g7, 8, %g7
+ or %g1, %g2, %g1
+ or %g7, %g3, %g7
+ or %g1, %g7, %g7
+ st %g7, [%o0 + 4]
+0: retl
+ mov 0, %o0
+
+ .section __ex_table,#alloc
+ .word 4b, retl_efault
+ .word 5b, retl_efault
+ .word 6b, retl_efault
+ .word 7b, retl_efault
+ .word 8b, retl_efault
+ .word 9b, retl_efault
+ .word 10b, retl_efault
+ .word 11b, retl_efault
+ .word 12b, retl_efault
+ .word 13b, retl_efault
+ .word 14b, retl_efault
+ .word 15b, retl_efault
+ .word 16b, retl_efault
+ .previous
panic(str);
}
-#define do_integer_load(dest_reg, size, saddr, is_signed, errh) ({ \
-__asm__ __volatile__ ( \
- "cmp %1, 8\n\t" \
- "be 9f\n\t" \
- " cmp %1, 4\n\t" \
- "be 6f\n" \
-"4:\t" " ldub [%2], %%l1\n" \
-"5:\t" "ldub [%2 + 1], %%l2\n\t" \
- "sll %%l1, 8, %%l1\n\t" \
- "tst %3\n\t" \
- "be 3f\n\t" \
- " add %%l1, %%l2, %%l1\n\t" \
- "sll %%l1, 16, %%l1\n\t" \
- "sra %%l1, 16, %%l1\n" \
-"3:\t" "b 0f\n\t" \
- " st %%l1, [%0]\n" \
-"6:\t" "ldub [%2 + 1], %%l2\n\t" \
- "sll %%l1, 24, %%l1\n" \
-"7:\t" "ldub [%2 + 2], %%g7\n\t" \
- "sll %%l2, 16, %%l2\n" \
-"8:\t" "ldub [%2 + 3], %%g1\n\t" \
- "sll %%g7, 8, %%g7\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n\t" \
- "or %%l1, %%g7, %%l1\n\t" \
- "b 0f\n\t" \
- " st %%l1, [%0]\n" \
-"9:\t" "ldub [%2], %%l1\n" \
-"10:\t" "ldub [%2 + 1], %%l2\n\t" \
- "sll %%l1, 24, %%l1\n" \
-"11:\t" "ldub [%2 + 2], %%g7\n\t" \
- "sll %%l2, 16, %%l2\n" \
-"12:\t" "ldub [%2 + 3], %%g1\n\t" \
- "sll %%g7, 8, %%g7\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n\t" \
- "or %%l1, %%g7, %%g7\n" \
-"13:\t" "ldub [%2 + 4], %%l1\n\t" \
- "st %%g7, [%0]\n" \
-"14:\t" "ldub [%2 + 5], %%l2\n\t" \
- "sll %%l1, 24, %%l1\n" \
-"15:\t" "ldub [%2 + 6], %%g7\n\t" \
- "sll %%l2, 16, %%l2\n" \
-"16:\t" "ldub [%2 + 7], %%g1\n\t" \
- "sll %%g7, 8, %%g7\n\t" \
- "or %%l1, %%l2, %%l1\n\t" \
- "or %%g7, %%g1, %%g7\n\t" \
- "or %%l1, %%g7, %%g7\n\t" \
- "st %%g7, [%0 + 4]\n" \
-"0:\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
- ".word 4b, " #errh "\n\t" \
- ".word 5b, " #errh "\n\t" \
- ".word 6b, " #errh "\n\t" \
- ".word 7b, " #errh "\n\t" \
- ".word 8b, " #errh "\n\t" \
- ".word 9b, " #errh "\n\t" \
- ".word 10b, " #errh "\n\t" \
- ".word 11b, " #errh "\n\t" \
- ".word 12b, " #errh "\n\t" \
- ".word 13b, " #errh "\n\t" \
- ".word 14b, " #errh "\n\t" \
- ".word 15b, " #errh "\n\t" \
- ".word 16b, " #errh "\n\n\t" \
- ".previous\n\t" \
- : : "r" (dest_reg), "r" (size), "r" (saddr), "r" (is_signed) \
- : "l1", "l2", "g7", "g1", "cc"); \
-})
-
-#define store_common(dst_addr, size, src_val, errh) ({ \
-__asm__ __volatile__ ( \
- "ld [%2], %%l1\n" \
- "cmp %1, 2\n\t" \
- "be 2f\n\t" \
- " cmp %1, 4\n\t" \
- "be 1f\n\t" \
- " srl %%l1, 24, %%l2\n\t" \
- "srl %%l1, 16, %%g7\n" \
-"4:\t" "stb %%l2, [%0]\n\t" \
- "srl %%l1, 8, %%l2\n" \
-"5:\t" "stb %%g7, [%0 + 1]\n\t" \
- "ld [%2 + 4], %%g7\n" \
-"6:\t" "stb %%l2, [%0 + 2]\n\t" \
- "srl %%g7, 24, %%l2\n" \
-"7:\t" "stb %%l1, [%0 + 3]\n\t" \
- "srl %%g7, 16, %%l1\n" \
-"8:\t" "stb %%l2, [%0 + 4]\n\t" \
- "srl %%g7, 8, %%l2\n" \
-"9:\t" "stb %%l1, [%0 + 5]\n" \
-"10:\t" "stb %%l2, [%0 + 6]\n\t" \
- "b 0f\n" \
-"11:\t" " stb %%g7, [%0 + 7]\n" \
-"1:\t" "srl %%l1, 16, %%g7\n" \
-"12:\t" "stb %%l2, [%0]\n\t" \
- "srl %%l1, 8, %%l2\n" \
-"13:\t" "stb %%g7, [%0 + 1]\n" \
-"14:\t" "stb %%l2, [%0 + 2]\n\t" \
- "b 0f\n" \
-"15:\t" " stb %%l1, [%0 + 3]\n" \
-"2:\t" "srl %%l1, 8, %%l2\n" \
-"16:\t" "stb %%l2, [%0]\n" \
-"17:\t" "stb %%l1, [%0 + 1]\n" \
-"0:\n\n\t" \
- ".section __ex_table,#alloc\n\t" \
- ".word 4b, " #errh "\n\t" \
- ".word 5b, " #errh "\n\t" \
- ".word 6b, " #errh "\n\t" \
- ".word 7b, " #errh "\n\t" \
- ".word 8b, " #errh "\n\t" \
- ".word 9b, " #errh "\n\t" \
- ".word 10b, " #errh "\n\t" \
- ".word 11b, " #errh "\n\t" \
- ".word 12b, " #errh "\n\t" \
- ".word 13b, " #errh "\n\t" \
- ".word 14b, " #errh "\n\t" \
- ".word 15b, " #errh "\n\t" \
- ".word 16b, " #errh "\n\t" \
- ".word 17b, " #errh "\n\n\t" \
- ".previous\n\t" \
- : : "r" (dst_addr), "r" (size), "r" (src_val) \
- : "l1", "l2", "g7", "g1", "cc"); \
-})
-
-#define do_integer_store(reg_num, size, dst_addr, regs, errh) ({ \
- unsigned long *src_val; \
- static unsigned long zero[2] = { 0, }; \
- \
- if (reg_num) src_val = fetch_reg_addr(reg_num, regs); \
- else { \
- src_val = &zero[0]; \
- if (size == 8) \
- zero[1] = fetch_reg(1, regs); \
- } \
- store_common(dst_addr, size, src_val, errh); \
-})
+/* una_asm.S */
+extern int do_int_load(unsigned long *dest_reg, int size,
+ unsigned long *saddr, int is_signed);
+extern int __do_int_store(unsigned long *dst_addr, int size,
+ unsigned long *src_val);
+
+static int do_int_store(int reg_num, int size, unsigned long *dst_addr,
+ struct pt_regs *regs)
+{
+ unsigned long zero[2] = { 0, 0 };
+ unsigned long *src_val;
+
+ if (reg_num)
+ src_val = fetch_reg_addr(reg_num, regs);
+ else {
+ src_val = &zero[0];
+ if (size == 8)
+ zero[1] = fetch_reg(1, regs);
+ }
+ return __do_int_store(dst_addr, size, src_val);
+}
extern void smp_capture(void);
extern void smp_release(void);
-#define do_atomic(srcdest_reg, mem, errh) ({ \
- unsigned long flags, tmp; \
- \
- smp_capture(); \
- local_irq_save(flags); \
- tmp = *srcdest_reg; \
- do_integer_load(srcdest_reg, 4, mem, 0, errh); \
- store_common(mem, 4, &tmp, errh); \
- local_irq_restore(flags); \
- smp_release(); \
-})
-
static inline void advance(struct pt_regs *regs)
{
regs->pc = regs->npc;
return !floating_point_load_or_store_p(insn);
}
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("kernel_mna_trap_fault");
-
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+static void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
{
unsigned long g2 = regs->u_regs [UREG_G2];
unsigned long fixup = search_extables_range(regs->pc, &g2);
printk("Unsupported unaligned load/store trap for kernel at <%08lx>.\n",
regs->pc);
unaligned_panic("Wheee. Kernel does fpu/atomic unaligned load/store.");
-
- __asm__ __volatile__ ("\n"
-"kernel_unaligned_trap_fault:\n\t"
- "mov %0, %%o0\n\t"
- "call kernel_mna_trap_fault\n\t"
- " mov %1, %%o1\n\t"
- :
- : "r" (regs), "r" (insn)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "g4", "g5", "g7", "cc");
} else {
unsigned long addr = compute_effective_address(regs, insn);
+ int err;
#ifdef DEBUG_MNA
printk("KMNA: pc=%08lx [dir=%s addr=%08lx size=%d] retpc[%08lx]\n",
regs->pc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]);
#endif
- switch(dir) {
+ switch (dir) {
case load:
- do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
- size, (unsigned long *) addr,
- decode_signedness(insn),
- kernel_unaligned_trap_fault);
+ err = do_int_load(fetch_reg_addr(((insn>>25)&0x1f),
+ regs),
+ size, (unsigned long *) addr,
+ decode_signedness(insn));
break;
case store:
- do_integer_store(((insn>>25)&0x1f), size,
- (unsigned long *) addr, regs,
- kernel_unaligned_trap_fault);
+ err = do_int_store(((insn>>25)&0x1f), size,
+ (unsigned long *) addr, regs);
break;
-#if 0 /* unsupported */
- case both:
- do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
- (unsigned long *) addr,
- kernel_unaligned_trap_fault);
- break;
-#endif
default:
panic("Impossible kernel unaligned trap.");
/* Not reached... */
}
- advance(regs);
+ if (err)
+ kernel_mna_trap_fault(regs, insn);
+ else
+ advance(regs);
}
}
return 0;
}
-void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("user_mna_trap_fault");
-
-void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+static void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
{
siginfo_t info;
if(!ok_for_user(regs, insn, dir)) {
goto kill_user;
} else {
- int size = decode_access_size(insn);
+ int err, size = decode_access_size(insn);
unsigned long addr;
if(floating_point_load_or_store_p(insn)) {
addr = compute_effective_address(regs, insn);
switch(dir) {
case load:
- do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
- size, (unsigned long *) addr,
- decode_signedness(insn),
- user_unaligned_trap_fault);
+ err = do_int_load(fetch_reg_addr(((insn>>25)&0x1f),
+ regs),
+ size, (unsigned long *) addr,
+ decode_signedness(insn));
break;
case store:
- do_integer_store(((insn>>25)&0x1f), size,
- (unsigned long *) addr, regs,
- user_unaligned_trap_fault);
+ err = do_int_store(((insn>>25)&0x1f), size,
+ (unsigned long *) addr, regs);
break;
case both:
-#if 0 /* unsupported */
- do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
- (unsigned long *) addr,
- user_unaligned_trap_fault);
-#else
/*
* This was supported in 2.4. However, we question
* the value of SWAP instruction across word boundaries.
*/
printk("Unaligned SWAP unsupported.\n");
- goto kill_user;
-#endif
+ err = -EFAULT;
break;
default:
unaligned_panic("Impossible user unaligned trap.");
-
- __asm__ __volatile__ ("\n"
-"user_unaligned_trap_fault:\n\t"
- "mov %0, %%o0\n\t"
- "call user_mna_trap_fault\n\t"
- " mov %1, %%o1\n\t"
- :
- : "r" (regs), "r" (insn)
- : "o0", "o1", "o2", "o3", "o4", "o5", "o7",
- "g1", "g2", "g3", "g4", "g5", "g7", "cc");
goto out;
}
- advance(regs);
+ if (err)
+ goto kill_user;
+ else
+ advance(regs);
goto out;
}
default y
select HAVE_OPROFILE
select HAVE_KPROBES
+ select HAVE_KRETPROBES
config SPARC64
bool
char* fp_name;
};
-struct cpu_fp_info linux_sparc_fpu[] = {
+static struct cpu_fp_info linux_sparc_fpu[] = {
{ 0x17, 0x10, 0, "UltraSparc I integrated FPU"},
{ 0x22, 0x10, 0, "UltraSparc I integrated FPU"},
{ 0x17, 0x11, 0, "UltraSparc II integrated FPU"},
#define NSPARCFPU ARRAY_SIZE(linux_sparc_fpu)
-struct cpu_iu_info linux_sparc_chips[] = {
+static struct cpu_iu_info linux_sparc_chips[] = {
{ 0x17, 0x10, "TI UltraSparc I (SpitFire)"},
{ 0x22, 0x10, "TI UltraSparc I (SpitFire)"},
{ 0x17, 0x11, "TI UltraSparc II (BlackBird)"},
}
}
-extern char reboot_command [];
-
void machine_halt(void)
{
sstate_halt();
#define SUNOS(x) ((long)sunos_sys_table[x])
#ifdef DEBUG_SOLARIS
-#define SOLD(s) printk("%s,%d,%s(): %s\n",__FILE__,__LINE__,__FUNCTION__,(s))
+#define SOLD(s) printk("%s,%d,%s(): %s\n",__FILE__,__LINE__,__func__,(s))
#define SOLDD(s) printk("solaris: "); printk s
#else
#define SOLD(s)
#define MKCTL_MAGIC 0xDEADBABEBADC0DEDL
#define PUT_MAGIC(a,m) do{(*(u64*)(a))=(m);}while(0)
#define SCHECK_MAGIC(a,m) do{if((*(u64*)(a))!=(m))printk("%s,%u,%s(): magic %08x at %p corrupted!\n",\
- __FILE__,__LINE__,__FUNCTION__,(m),(a));}while(0)
+ __FILE__,__LINE__,__func__,(m),(a));}while(0)
#define BUF_OFFSET sizeof(u64)
#define MKCTL_TRAILER sizeof(u64)
select HAVE_IDE
select HAVE_OPROFILE
select HAVE_KPROBES
- select HAVE_KVM
+ select HAVE_KRETPROBES
+ select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
config GENERIC_LOCKBREAK
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || PENTIUM4)
+ depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4)
config X86_TSC
def_bool y
{
struct cpufreq_freqs freqs;
u32 lo, hi;
- u8 current_multiplier, current_voltage;
int err = 0;
int i;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+#ifdef DEBUG
+ {
+ u8 current_multiplier, current_voltage;
+
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
current_multiplier = (lo >> 8) & 0xff;
printk(KERN_INFO "eps: Current multiplier = %d\n",
current_multiplier);
-
+ }
+#endif
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return err;
}
if (!cpu_has_fxsr)
return -ENODEV;
- unlazy_fpu(target);
+ init_fpu(target);
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.i387.fxsave, 0, -1);
if (!cpu_has_fxsr)
return -ENODEV;
- unlazy_fpu(target);
+ init_fpu(target);
set_stopped_child_used_math(target);
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
if (!HAVE_HWFP)
return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
- unlazy_fpu(target);
+ init_fpu(target);
if (!cpu_has_fxsr)
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
if (!HAVE_HWFP)
return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
- unlazy_fpu(target);
+ init_fpu(target);
set_stopped_child_used_math(target);
if (!cpu_has_fxsr)
apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
APIC_BUS_CYCLE_NS * apic->timer.divide_count;
atomic_set(&apic->timer.pending, 0);
+
+ if (!apic->timer.period)
+ return;
+
hrtimer_start(&apic->timer.dev,
ktime_add_ns(now, apic->timer.period),
HRTIMER_MODE_ABS);
unsigned level,
int metaphysical,
unsigned access,
- u64 *parent_pte,
- bool *new_page)
+ u64 *parent_pte)
{
union kvm_mmu_page_role role;
unsigned index;
vcpu->arch.mmu.prefetch_page(vcpu, sp);
if (!metaphysical)
rmap_write_protect(vcpu->kvm, gfn);
- if (new_page)
- *new_page = 1;
return sp;
}
struct page *gva_to_page(struct kvm_vcpu *vcpu, gva_t gva)
{
+ struct page *page;
+
gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
if (gpa == UNMAPPED_GVA)
return NULL;
- return gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+
+ down_read(¤t->mm->mmap_sem);
+ page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+ up_read(¤t->mm->mmap_sem);
+
+ return page;
}
static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
>> PAGE_SHIFT;
new_table = kvm_mmu_get_page(vcpu, pseudo_gfn,
v, level - 1,
- 1, ACC_ALL, &table[index],
- NULL);
+ 1, ACC_ALL, &table[index]);
if (!new_table) {
pgprintk("nonpaging_map: ENOMEM\n");
kvm_release_page_clean(page);
struct page *page;
+ down_read(&vcpu->kvm->slots_lock);
+
down_read(¤t->mm->mmap_sem);
page = gfn_to_page(vcpu->kvm, gfn);
+ up_read(¤t->mm->mmap_sem);
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_free_some_pages(vcpu);
r = __nonpaging_map(vcpu, v, write, gfn, page);
spin_unlock(&vcpu->kvm->mmu_lock);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return r;
}
ASSERT(!VALID_PAGE(root));
sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
- PT64_ROOT_LEVEL, 0, ACC_ALL, NULL, NULL);
+ PT64_ROOT_LEVEL, 0, ACC_ALL, NULL);
root = __pa(sp->spt);
++sp->root_count;
vcpu->arch.mmu.root_hpa = root;
root_gfn = 0;
sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
PT32_ROOT_LEVEL, !is_paging(vcpu),
- ACC_ALL, NULL, NULL);
+ ACC_ALL, NULL);
root = __pa(sp->spt);
++sp->root_count;
vcpu->arch.mmu.pae_root[i] = root | PT_PRESENT_MASK;
static void paging_new_cr3(struct kvm_vcpu *vcpu)
{
- pgprintk("%s: cr3 %lx\n", __FUNCTION__, vcpu->cr3);
+ pgprintk("%s: cr3 %lx\n", __FUNCTION__, vcpu->arch.cr3);
mmu_free_roots(vcpu);
}
gfn_t gfn;
int r;
u64 gpte = 0;
+ struct page *page;
if (bytes != 4 && bytes != 8)
return;
if (!is_present_pte(gpte))
return;
gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
+
+ down_read(¤t->mm->mmap_sem);
+ page = gfn_to_page(vcpu->kvm, gfn);
+ up_read(¤t->mm->mmap_sem);
+
vcpu->arch.update_pte.gfn = gfn;
vcpu->arch.update_pte.page = gfn_to_page(vcpu->kvm, gfn);
}
gpa_t gpa;
int r;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
spin_lock(&vcpu->kvm->mmu_lock);
r = kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT);
pt_element_t *table;
struct page *page;
+ down_read(¤t->mm->mmap_sem);
page = gfn_to_page(kvm, table_gfn);
+ up_read(¤t->mm->mmap_sem);
+
table = kmap_atomic(page, KM_USER0);
ret = CMPXCHG(&table[index], orig_pte, new_pte);
}
#endif
ASSERT((!is_long_mode(vcpu) && is_pae(vcpu)) ||
- (vcpu->cr3 & CR3_NONPAE_RESERVED_BITS) == 0);
+ (vcpu->arch.cr3 & CR3_NONPAE_RESERVED_BITS) == 0);
pt_access = ACC_ALL;
u64 shadow_pte;
int metaphysical;
gfn_t table_gfn;
- bool new_page = 0;
shadow_ent = ((u64 *)__va(shadow_addr)) + index;
if (level == PT_PAGE_TABLE_LEVEL)
}
shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
metaphysical, access,
- shadow_ent, &new_page);
- if (new_page && !metaphysical) {
+ shadow_ent);
+ if (!metaphysical) {
int r;
pt_element_t curr_pte;
r = kvm_read_guest_atomic(vcpu->kvm,
if (r)
return r;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
/*
* Look up the shadow pte for the faulting address.
*/
pgprintk("%s: guest page fault\n", __FUNCTION__);
inject_page_fault(vcpu, addr, walker.error_code);
vcpu->arch.last_pt_write_count = 0; /* reset fork detector */
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return 0;
}
+ down_read(¤t->mm->mmap_sem);
page = gfn_to_page(vcpu->kvm, walker.gfn);
+ up_read(¤t->mm->mmap_sem);
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_free_some_pages(vcpu);
*/
if (shadow_pte && is_io_pte(*shadow_pte)) {
spin_unlock(&vcpu->kvm->mmu_lock);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return 1;
}
++vcpu->stat.pf_fixed;
kvm_mmu_audit(vcpu, "post page fault (fixed)");
spin_unlock(&vcpu->kvm->mmu_lock);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return write_pt;
}
vcpu->arch.cr0 = cr0;
cr0 |= X86_CR0_PG | X86_CR0_WP;
cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
+ if (!vcpu->fpu_active) {
+ svm->vmcb->control.intercept_exceptions |= (1 << NM_VECTOR);
+ cr0 |= X86_CR0_TS;
+ }
svm->vmcb->save.cr0 = cr0;
}
case MSR_IA32_SYSENTER_ESP:
*data = svm->vmcb->save.sysenter_esp;
break;
+ /* Nobody will change the following 5 values in the VMCB so
+ we can safely return them on rdmsr. They will always be 0
+ until LBRV is implemented. */
+ case MSR_IA32_DEBUGCTLMSR:
+ *data = svm->vmcb->save.dbgctl;
+ break;
+ case MSR_IA32_LASTBRANCHFROMIP:
+ *data = svm->vmcb->save.br_from;
+ break;
+ case MSR_IA32_LASTBRANCHTOIP:
+ *data = svm->vmcb->save.br_to;
+ break;
+ case MSR_IA32_LASTINTFROMIP:
+ *data = svm->vmcb->save.last_excp_from;
+ break;
+ case MSR_IA32_LASTINTTOIP:
+ *data = svm->vmcb->save.last_excp_to;
+ break;
default:
return kvm_get_msr_common(vcpu, ecx, data);
}
case MSR_IA32_SYSENTER_ESP:
svm->vmcb->save.sysenter_esp = data;
break;
+ case MSR_IA32_DEBUGCTLMSR:
+ pr_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
+ __FUNCTION__, data);
+ break;
case MSR_K7_EVNTSEL0:
case MSR_K7_EVNTSEL1:
case MSR_K7_EVNTSEL2:
{
int save_nmsrs;
+ vmx_load_host_state(vmx);
save_nmsrs = 0;
#ifdef CONFIG_X86_64
if (is_long_mode(&vmx->vcpu)) {
struct kvm_userspace_memory_region kvm_userspace_mem;
int r = 0;
- down_write(¤t->mm->mmap_sem);
+ down_write(&kvm->slots_lock);
if (kvm->arch.apic_access_page)
goto out;
kvm_userspace_mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT;
r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
if (r)
goto out;
+
+ down_read(¤t->mm->mmap_sem);
kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+ up_read(¤t->mm->mmap_sem);
out:
- up_write(¤t->mm->mmap_sem);
+ up_write(&kvm->slots_lock);
return r;
}
vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
vmcs_writel(CR4_GUEST_HOST_MASK, KVM_GUEST_CR4_MASK);
- if (vm_need_virtualize_apic_accesses(vmx->vcpu.kvm))
- if (alloc_apic_access_page(vmx->vcpu.kvm) != 0)
- return -ENOMEM;
return 0;
}
put_cpu();
if (err)
goto free_vmcs;
+ if (vm_need_virtualize_apic_accesses(kvm))
+ if (alloc_apic_access_page(kvm) != 0)
+ goto free_vmcs;
return &vmx->vcpu;
#define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
+static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
+ struct kvm_cpuid_entry2 __user *entries);
+
struct kvm_x86_ops *kvm_x86_ops;
struct kvm_stats_debugfs_item debugfs_entries[] = {
int ret;
u64 pdpte[ARRAY_SIZE(vcpu->arch.pdptrs)];
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
ret = kvm_read_guest_page(vcpu->kvm, pdpt_gfn, pdpte,
offset * sizeof(u64), sizeof(pdpte));
if (ret < 0) {
memcpy(vcpu->arch.pdptrs, pdpte, sizeof(vcpu->arch.pdptrs));
out:
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return ret;
}
if (is_long_mode(vcpu) || !is_pae(vcpu))
return false;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
r = kvm_read_guest(vcpu->kvm, vcpu->arch.cr3 & ~31u, pdpte, sizeof(pdpte));
if (r < 0)
goto out;
changed = memcmp(pdpte, vcpu->arch.pdptrs, sizeof(pdpte)) != 0;
out:
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return changed;
}
*/
}
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
/*
* Does the new cr3 value map to physical memory? (Note, we
* catch an invalid cr3 even in real-mode, because it would
vcpu->arch.cr3 = cr3;
vcpu->arch.mmu.new_cr3(vcpu);
}
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
}
EXPORT_SYMBOL_GPL(set_cr3);
pr_unimpl(vcpu, "%s: MSR_IA32_MCG_STATUS 0x%llx, nop\n",
__FUNCTION__, data);
break;
+ case MSR_IA32_MCG_CTL:
+ pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
+ __FUNCTION__, data);
+ break;
case MSR_IA32_UCODE_REV:
case MSR_IA32_UCODE_WRITE:
case 0x200 ... 0x2ff: /* MTRRs */
case MSR_IA32_MC0_CTL:
case MSR_IA32_MCG_STATUS:
case MSR_IA32_MCG_CAP:
+ case MSR_IA32_MCG_CTL:
case MSR_IA32_MC0_MISC:
case MSR_IA32_MC0_MISC+4:
case MSR_IA32_MC0_MISC+8:
r = 0;
break;
}
+ case KVM_GET_SUPPORTED_CPUID: {
+ struct kvm_cpuid2 __user *cpuid_arg = argp;
+ struct kvm_cpuid2 cpuid;
+
+ r = -EFAULT;
+ if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
+ goto out;
+ r = kvm_dev_ioctl_get_supported_cpuid(&cpuid,
+ cpuid_arg->entries);
+ if (r)
+ goto out;
+
+ r = -EFAULT;
+ if (copy_to_user(cpuid_arg, &cpuid, sizeof cpuid))
+ goto out;
+ r = 0;
+ break;
+ }
default:
r = -EINVAL;
}
put_cpu();
}
-static int kvm_vm_ioctl_get_supported_cpuid(struct kvm *kvm,
- struct kvm_cpuid2 *cpuid,
+static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries)
{
struct kvm_cpuid_entry2 *cpuid_entries;
if (kvm_nr_mmu_pages < KVM_MIN_ALLOC_MMU_PAGES)
return -EINVAL;
- down_write(¤t->mm->mmap_sem);
+ down_write(&kvm->slots_lock);
kvm_mmu_change_mmu_pages(kvm, kvm_nr_mmu_pages);
kvm->arch.n_requested_mmu_pages = kvm_nr_mmu_pages;
- up_write(¤t->mm->mmap_sem);
+ up_write(&kvm->slots_lock);
return 0;
}
< alias->target_phys_addr)
goto out;
- down_write(¤t->mm->mmap_sem);
+ down_write(&kvm->slots_lock);
p = &kvm->arch.aliases[alias->slot];
p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
kvm_mmu_zap_all(kvm);
- up_write(¤t->mm->mmap_sem);
+ up_write(&kvm->slots_lock);
return 0;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
- down_write(¤t->mm->mmap_sem);
+ down_write(&kvm->slots_lock);
r = kvm_get_dirty_log(kvm, log, &is_dirty);
if (r)
}
r = 0;
out:
- up_write(¤t->mm->mmap_sem);
+ up_write(&kvm->slots_lock);
return r;
}
r = 0;
break;
}
- case KVM_GET_SUPPORTED_CPUID: {
- struct kvm_cpuid2 __user *cpuid_arg = argp;
- struct kvm_cpuid2 cpuid;
-
- r = -EFAULT;
- if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
- goto out;
- r = kvm_vm_ioctl_get_supported_cpuid(kvm, &cpuid,
- cpuid_arg->entries);
- if (r)
- goto out;
-
- r = -EFAULT;
- if (copy_to_user(cpuid_arg, &cpuid, sizeof cpuid))
- goto out;
- r = 0;
- break;
- }
default:
;
}
void *data = val;
int r = X86EMUL_CONTINUE;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
while (bytes) {
gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
unsigned offset = addr & (PAGE_SIZE-1);
addr += tocopy;
}
out:
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return r;
}
EXPORT_SYMBOL_GPL(emulator_read_std);
return X86EMUL_CONTINUE;
}
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
/* For APIC access vmexit */
if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
{
int ret;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
ret = kvm_write_guest(vcpu->kvm, gpa, val, bytes);
if (ret < 0) {
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return 0;
}
kvm_mmu_pte_write(vcpu, gpa, val, bytes);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
return 1;
}
struct kvm_io_device *mmio_dev;
gpa_t gpa;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
if (gpa == UNMAPPED_GVA) {
kvm_inject_page_fault(vcpu, addr, 2);
char *kaddr;
u64 val;
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
if (gpa == UNMAPPED_GVA ||
goto emul_write;
val = *(u64 *)new;
+
+ down_read(¤t->mm->mmap_sem);
page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+ up_read(¤t->mm->mmap_sem);
+
kaddr = kmap_atomic(page, KM_USER0);
set_64bit((u64 *)(kaddr + offset_in_page(gpa)), val);
kunmap_atomic(kaddr, KM_USER0);
kvm_release_page_dirty(page);
emul_write:
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
}
#endif
kvm_x86_ops->skip_emulated_instruction(vcpu);
for (i = 0; i < nr_pages; ++i) {
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
page = gva_to_page(vcpu, address + i * PAGE_SIZE);
vcpu->arch.pio.guest_pages[i] = page;
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
if (!page) {
kvm_inject_gp(vcpu, 0);
free_pio_guest_pages(vcpu);
down_read(¤t->mm->mmap_sem);
page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
- vcpu->arch.apic->vapic_page = page;
up_read(¤t->mm->mmap_sem);
+
+ vcpu->arch.apic->vapic_page = page;
}
static void vapic_exit(struct kvm_vcpu *vcpu)
kvm_x86_ops->decache_cr4_guest_bits(vcpu);
mmu_reset_needed |= vcpu->arch.cr0 != sregs->cr0;
- vcpu->arch.cr0 = sregs->cr0;
kvm_x86_ops->set_cr0(vcpu, sregs->cr0);
+ vcpu->arch.cr0 = sregs->cr0;
mmu_reset_needed |= vcpu->arch.cr4 != sregs->cr4;
kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
gpa_t gpa;
vcpu_load(vcpu);
- down_read(¤t->mm->mmap_sem);
+ down_read(&vcpu->kvm->slots_lock);
gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, vaddr);
- up_read(¤t->mm->mmap_sem);
+ up_read(&vcpu->kvm->slots_lock);
tr->physical_address = gpa;
tr->valid = gpa != UNMAPPED_GVA;
tr->writeable = 1;
*/
if (!user_alloc) {
if (npages && !old.rmap) {
+ down_write(¤t->mm->mmap_sem);
memslot->userspace_addr = do_mmap(NULL, 0,
npages * PAGE_SIZE,
PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS,
0);
+ up_write(¤t->mm->mmap_sem);
if (IS_ERR((void *)memslot->userspace_addr))
return PTR_ERR((void *)memslot->userspace_addr);
if (!old.user_alloc && old.rmap) {
int ret;
+ down_write(¤t->mm->mmap_sem);
ret = do_munmap(current->mm, old.userspace_addr,
old.npages * PAGE_SIZE);
+ up_write(¤t->mm->mmap_sem);
if (ret < 0)
printk(KERN_WARNING
"kvm_vm_ioctl_set_memory_region: "
int i;
for (i = 0; i < NR_CPUS; i++) {
+ int node;
u16 apicid = x86_cpu_to_apicid_init[i];
if (apicid == BAD_APICID)
continue;
- if (apicid_to_node[apicid] == NUMA_NO_NODE)
+ node = apicid_to_node[apicid];
+ if (node == NUMA_NO_NODE)
continue;
- numa_set_node(i, apicid_to_node[apicid]);
+ if (!node_online(node))
+ continue;
+ numa_set_node(i, node);
}
}
pgprot_t mask_set;
pgprot_t mask_clr;
int numpages;
- int processed;
int flushtlb;
unsigned long pfn;
};
*/
nextpage_addr = (address + psize) & pmask;
numpages = (nextpage_addr - address) >> PAGE_SHIFT;
- if (numpages < cpa->processed)
- cpa->processed = numpages;
+ if (numpages < cpa->numpages)
+ cpa->numpages = numpages;
/*
* We are safe now. Check whether the new pgprot is the same:
*/
addr = address + PAGE_SIZE;
pfn++;
- for (i = 1; i < cpa->processed; i++, addr += PAGE_SIZE, pfn++) {
+ for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) {
pgprot_t chk_prot = static_protections(new_prot, addr, pfn);
if (pgprot_val(chk_prot) != pgprot_val(new_prot))
* that we limited the number of possible pages already to
* the number of pages in the large page.
*/
- if (address == (nextpage_addr - psize) && cpa->processed == numpages) {
+ if (address == (nextpage_addr - psize) && cpa->numpages == numpages) {
/*
* The address is aligned and the number of pages
* covers the full page.
set_pte_atomic(kpte, new_pte);
cpa->flushtlb = 1;
}
- cpa->processed = 1;
+ cpa->numpages = 1;
return 0;
}
do_split = try_preserve_large_page(kpte, address, cpa);
/*
* When the range fits into the existing large page,
- * return. cp->processed and cpa->tlbflush have been updated in
+ * return. cp->numpages and cpa->tlbflush have been updated in
* try_large_page:
*/
if (do_split <= 0)
* Store the remaining nr of pages for the large page
* preservation check.
*/
- cpa->numpages = cpa->processed = numpages;
+ cpa->numpages = numpages;
ret = __change_page_attr(cpa, checkalias);
if (ret)
* CPA operation. Either a large page has been
* preserved or a single page update happened.
*/
- BUG_ON(cpa->processed > numpages);
- numpages -= cpa->processed;
- cpa->vaddr += cpa->processed * PAGE_SIZE;
+ BUG_ON(cpa->numpages > numpages);
+ numpages -= cpa->numpages;
+ cpa->vaddr += cpa->numpages * PAGE_SIZE;
}
return 0;
}
unsigned long max_pfn = xen_start_info->nr_pages;
e820.nr_map = 0;
- add_memory_region(0, PFN_PHYS(max_pfn), E820_RAM);
+ add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+ add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM);
return "Xen";
}
static void bio_end_empty_barrier(struct bio *bio, int err)
{
- if (err)
+ if (err) {
+ if (err == -EOPNOTSUPP)
+ set_bit(BIO_EOPNOTSUPP, &bio->bi_flags);
clear_bit(BIO_UPTODATE, &bio->bi_flags);
+ }
complete(bio->bi_private);
}
*error_sector = bio->bi_sector;
ret = 0;
- if (!bio_flagged(bio, BIO_UPTODATE))
+ if (bio_flagged(bio, BIO_EOPNOTSUPP))
+ ret = -EOPNOTSUPP;
+ else if (!bio_flagged(bio, BIO_UPTODATE))
ret = -EIO;
bio_put(bio);
rq->nr_hw_segments = 0;
rq->ioprio = 0;
rq->special = NULL;
- rq->raw_data_len = 0;
rq->buffer = NULL;
rq->tag = -1;
rq->errors = 0;
rq->cmd_len = 0;
memset(rq->cmd, 0, sizeof(rq->cmd));
rq->data_len = 0;
+ rq->extra_len = 0;
rq->sense_len = 0;
rq->data = NULL;
rq->sense = NULL;
{
kobject_put(&q->kobj);
}
-EXPORT_SYMBOL(blk_put_queue);
void blk_cleanup_queue(struct request_queue *q)
{
return 1;
}
-EXPORT_SYMBOL(blk_get_queue);
static inline void blk_free_request(struct request_queue *q, struct request *rq)
{
/**
* blk_rq_bytes - Returns bytes left to complete in the entire request
+ * @rq: the request being processed
**/
unsigned int blk_rq_bytes(struct request *rq)
{
/**
* blk_rq_cur_bytes - Returns bytes left to complete in the current segment
+ * @rq: the request being processed
**/
unsigned int blk_rq_cur_bytes(struct request *rq)
{
rq->hard_cur_sectors = rq->current_nr_sectors;
rq->hard_nr_sectors = rq->nr_sectors = bio_sectors(bio);
rq->buffer = bio_data(bio);
- rq->raw_data_len = bio->bi_size;
rq->data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
rq->biotail->bi_next = bio;
rq->biotail = bio;
- rq->raw_data_len += bio->bi_size;
rq->data_len += bio->bi_size;
}
return 0;
void __user *ubuf, unsigned int len)
{
unsigned long uaddr;
+ unsigned int alignment;
struct bio *bio, *orig_bio;
int reading, ret;
* direct dma. else, set up kernel bounce buffers
*/
uaddr = (unsigned long) ubuf;
- if (!(uaddr & queue_dma_alignment(q)) &&
- !(len & queue_dma_alignment(q)))
+ alignment = queue_dma_alignment(q) | q->dma_pad_mask;
+ if (!(uaddr & alignment) && !(len & alignment))
bio = bio_map_user(q, NULL, uaddr, len, reading);
else
bio = bio_copy_user(q, uaddr, len, reading);
/*
* __blk_rq_map_user() copies the buffers if starting address
- * or length isn't aligned. As the copied buffer is always
- * page aligned, we know that there's enough room for padding.
- * Extend the last bio and update rq->data_len accordingly.
+ * or length isn't aligned to dma_pad_mask. As the copied
+ * buffer is always page aligned, we know that there's enough
+ * room for padding. Extend the last bio and update
+ * rq->data_len accordingly.
*
* On unmap, bio_uncopy_user() will use unmodified
* bio_map_data pointed to by bio->bi_private.
*/
- if (len & queue_dma_alignment(q)) {
- unsigned int pad_len = (queue_dma_alignment(q) & ~len) + 1;
- struct bio *bio = rq->biotail;
+ if (len & q->dma_pad_mask) {
+ unsigned int pad_len = (q->dma_pad_mask & ~len) + 1;
+ struct bio *tail = rq->biotail;
- bio->bi_io_vec[bio->bi_vcnt - 1].bv_len += pad_len;
- bio->bi_size += pad_len;
- rq->data_len += pad_len;
+ tail->bi_io_vec[tail->bi_vcnt - 1].bv_len += pad_len;
+ tail->bi_size += pad_len;
+
+ rq->extra_len += pad_len;
}
rq->buffer = rq->data = NULL;
rq->buffer = rq->data = NULL;
return 0;
}
-EXPORT_SYMBOL(blk_rq_map_user_iov);
/**
* blk_rq_unmap_user - unmap a request with user data
((unsigned long)q->dma_drain_buffer) &
(PAGE_SIZE - 1));
nsegs++;
- rq->data_len += q->dma_drain_size;
+ rq->extra_len += q->dma_drain_size;
}
if (sg)
/* Assume anything <= 4GB can be handled by IOMMU.
Actually some IOMMUs can handle everything, but I don't
know of a way to test this here. */
- if (b_pfn < (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
EXPORT_SYMBOL(blk_queue_stack_limits);
/**
- * blk_queue_dma_drain - Set up a drain buffer for excess dma.
+ * blk_queue_dma_pad - set pad mask
+ * @q: the request queue for the device
+ * @mask: pad mask
+ *
+ * Set pad mask. Direct IO requests are padded to the mask specified.
*
+ * Appending pad buffer to a request modifies ->data_len such that it
+ * includes the pad buffer. The original requested data length can be
+ * obtained using blk_rq_raw_data_len().
+ **/
+void blk_queue_dma_pad(struct request_queue *q, unsigned int mask)
+{
+ q->dma_pad_mask = mask;
+}
+EXPORT_SYMBOL(blk_queue_dma_pad);
+
+/**
+ * blk_queue_dma_drain - Set up a drain buffer for excess dma.
* @q: the request queue for the device
* @dma_drain_needed: fn which returns non-zero if drain is necessary
* @buf: physically contiguous buffer
* device can support otherwise there won't be room for the drain
* buffer.
*/
-extern int blk_queue_dma_drain(struct request_queue *q,
+int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size)
{
#include <linux/bio.h>
#include <linux/blkdev.h>
+#include "blk.h"
+
/**
* blk_queue_find_tag - find a request by its tag and queue
* @q: The request queue for the device
void blk_queue_congestion_threshold(struct request_queue *q);
+int blk_dev_init(void);
+
/*
* Return the threshold (number of used requests) at which the queue is
* considered to be congested. It include a little hysteresis to keep the
}
if (rq->next_rq) {
- hdr->dout_resid = rq->raw_data_len;
- hdr->din_resid = rq->next_rq->raw_data_len;
+ hdr->dout_resid = rq->data_len;
+ hdr->din_resid = rq->next_rq->data_len;
blk_rq_unmap_user(bidi_bio);
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
- hdr->din_resid = rq->raw_data_len;
+ hdr->din_resid = rq->data_len;
else
- hdr->dout_resid = rq->raw_data_len;
+ hdr->dout_resid = rq->data_len;
/*
* If the request generated a negative error number, return it
#include <linux/buffer_head.h>
#include <linux/mutex.h>
+#include "blk.h"
+
static DEFINE_MUTEX(block_class_lock);
#ifndef CONFIG_SYSFS_DEPRECATED
struct kobject *block_depr;
#endif
+static struct device_type disk_type;
+
/*
* Can be deleted altogether. Later.
*
#endif
-extern int blk_dev_init(void);
-
static struct kobject *base_probe(dev_t devt, int *part, void *data)
{
if (request_module("block-major-%d-%d", MAJOR(devt), MINOR(devt)) > 0)
.name = "block",
};
-struct device_type disk_type = {
+static struct device_type disk_type = {
.name = "disk",
.groups = disk_attr_groups,
.release = disk_release,
put_device(gd->driverfs_dev);
}
+#if 0
void genhd_media_change_notify(struct gendisk *disk)
{
get_device(disk->driverfs_dev);
schedule_work(&disk->async_notify);
}
EXPORT_SYMBOL_GPL(genhd_media_change_notify);
+#endif /* 0 */
dev_t blk_lookup_devt(const char *name)
{
hdr->info = 0;
if (hdr->masked_status || hdr->host_status || hdr->driver_status)
hdr->info |= SG_INFO_CHECK;
- hdr->resid = rq->raw_data_len;
+ hdr->resid = rq->data_len;
hdr->sb_len_wr = 0;
if (rq->sense_len && hdr->sbp) {
rq = blk_get_request(q, WRITE, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_BLOCK_PC;
rq->data = NULL;
- rq->raw_data_len = 0;
rq->data_len = 0;
+ rq->extra_len = 0;
rq->timeout = BLK_DEFAULT_SG_TIMEOUT;
memset(rq->cmd, 0, sizeof(rq->cmd));
rq->cmd[0] = cmd;
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
+ select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
help
crypto_blkcipher-objs := ablkcipher.o
crypto_blkcipher-objs += blkcipher.o
+crypto_blkcipher-objs += chainiv.o
+crypto_blkcipher-objs += eseqiv.o
obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
crypto_hash-objs := hash.o
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Asynchronous block chaining cipher type");
}
EXPORT_SYMBOL_GPL(skcipher_geniv_exit);
+static int __init blkcipher_module_init(void)
+{
+ int err;
+
+ err = chainiv_module_init();
+ if (err)
+ goto out;
+
+ err = eseqiv_module_init();
+ if (err)
+ goto eseqiv_err;
+
+out:
+ return err;
+
+eseqiv_err:
+ chainiv_module_exit();
+ goto out;
+}
+
+static void __exit blkcipher_module_exit(void)
+{
+ eseqiv_module_exit();
+ chainiv_module_exit();
+}
+
+module_init(blkcipher_module_init);
+module_exit(blkcipher_module_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic block chaining cipher type");
.module = THIS_MODULE,
};
-static int __init chainiv_module_init(void)
+int __init chainiv_module_init(void)
{
return crypto_register_template(&chainiv_tmpl);
}
+EXPORT_SYMBOL_GPL(chainiv_module_init);
-static void __exit chainiv_module_exit(void)
+void __exit chainiv_module_exit(void)
{
crypto_unregister_template(&chainiv_tmpl);
}
-
-module_init(chainiv_module_init);
-module_exit(chainiv_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Chain IV Generator");
+EXPORT_SYMBOL_GPL(chainiv_module_exit);
#include <linux/module.h>
#include <linux/scatterlist.h>
+#include "internal.h"
+
static int init(struct hash_desc *desc)
{
struct crypto_tfm *tfm = crypto_hash_tfm(desc->tfm);
.module = THIS_MODULE,
};
-static int __init eseqiv_module_init(void)
+int __init eseqiv_module_init(void)
{
return crypto_register_template(&eseqiv_tmpl);
}
+EXPORT_SYMBOL_GPL(eseqiv_module_init);
-static void __exit eseqiv_module_exit(void)
+void __exit eseqiv_module_exit(void)
{
crypto_unregister_template(&eseqiv_tmpl);
}
-
-module_init(eseqiv_module_init);
-module_exit(eseqiv_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Encrypted Sequence Number IV Generator");
+EXPORT_SYMBOL_GPL(eseqiv_module_exit);
unsigned int offset = sg[i].offset;
unsigned int slen = sg[i].length;
+ if (unlikely(slen > nbytes))
+ slen = nbytes;
+
+ nbytes -= slen;
+
while (slen > 0) {
unsigned int len = min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
char *p = crypto_kmap(pg, 0) + offset;
offset = 0;
pg++;
}
- nbytes-=sg[i].length;
i++;
} while (nbytes>0);
}
struct sinfo {
- be128 t;
+ be128 *t;
struct crypto_tfm *tfm;
void (*fn)(struct crypto_tfm *, u8 *, const u8 *);
};
static inline void xts_round(struct sinfo *s, void *dst, const void *src)
{
- be128_xor(dst, &s->t, src); /* PP <- T xor P */
+ be128_xor(dst, s->t, src); /* PP <- T xor P */
s->fn(s->tfm, dst, dst); /* CC <- E(Key1,PP) */
- be128_xor(dst, dst, &s->t); /* C <- T xor CC */
+ be128_xor(dst, dst, s->t); /* C <- T xor CC */
}
static int crypt(struct blkcipher_desc *d,
.tfm = crypto_cipher_tfm(ctx->child),
.fn = fn
};
- be128 *iv;
u8 *wsrc;
u8 *wdst;
if (!w->nbytes)
return err;
+ s.t = (be128 *)w->iv;
avail = w->nbytes;
wsrc = w->src.virt.addr;
wdst = w->dst.virt.addr;
/* calculate first value of T */
- iv = (be128 *)w->iv;
- tw(crypto_cipher_tfm(ctx->tweak), (void *)&s.t, w->iv);
+ tw(crypto_cipher_tfm(ctx->tweak), w->iv, w->iv);
goto first;
for (;;) {
do {
- gf128mul_x_ble(&s.t, &s.t);
+ gf128mul_x_ble(s.t, s.t);
first:
xts_round(&s, wdst, wsrc);
};
struct kbdiacruc accent_table[MAX_DIACR] = {
- {'`', 'A', '\300'}, {'`', 'a', '\340'},
- {'\'', 'A', '\301'}, {'\'', 'a', '\341'},
- {'^', 'A', '\302'}, {'^', 'a', '\342'},
- {'~', 'A', '\303'}, {'~', 'a', '\343'},
- {'"', 'A', '\304'}, {'"', 'a', '\344'},
- {'O', 'A', '\305'}, {'o', 'a', '\345'},
- {'0', 'A', '\305'}, {'0', 'a', '\345'},
- {'A', 'A', '\305'}, {'a', 'a', '\345'},
- {'A', 'E', '\306'}, {'a', 'e', '\346'},
- {',', 'C', '\307'}, {',', 'c', '\347'},
- {'`', 'E', '\310'}, {'`', 'e', '\350'},
- {'\'', 'E', '\311'}, {'\'', 'e', '\351'},
- {'^', 'E', '\312'}, {'^', 'e', '\352'},
- {'"', 'E', '\313'}, {'"', 'e', '\353'},
- {'`', 'I', '\314'}, {'`', 'i', '\354'},
- {'\'', 'I', '\315'}, {'\'', 'i', '\355'},
- {'^', 'I', '\316'}, {'^', 'i', '\356'},
- {'"', 'I', '\317'}, {'"', 'i', '\357'},
- {'-', 'D', '\320'}, {'-', 'd', '\360'},
- {'~', 'N', '\321'}, {'~', 'n', '\361'},
- {'`', 'O', '\322'}, {'`', 'o', '\362'},
- {'\'', 'O', '\323'}, {'\'', 'o', '\363'},
- {'^', 'O', '\324'}, {'^', 'o', '\364'},
- {'~', 'O', '\325'}, {'~', 'o', '\365'},
- {'"', 'O', '\326'}, {'"', 'o', '\366'},
- {'/', 'O', '\330'}, {'/', 'o', '\370'},
- {'`', 'U', '\331'}, {'`', 'u', '\371'},
- {'\'', 'U', '\332'}, {'\'', 'u', '\372'},
- {'^', 'U', '\333'}, {'^', 'u', '\373'},
- {'"', 'U', '\334'}, {'"', 'u', '\374'},
- {'\'', 'Y', '\335'}, {'\'', 'y', '\375'},
- {'T', 'H', '\336'}, {'t', 'h', '\376'},
- {'s', 's', '\337'}, {'"', 'y', '\377'},
- {'s', 'z', '\337'}, {'i', 'j', '\377'},
+ {'`', 'A', 0300}, {'`', 'a', 0340},
+ {'\'', 'A', 0301}, {'\'', 'a', 0341},
+ {'^', 'A', 0302}, {'^', 'a', 0342},
+ {'~', 'A', 0303}, {'~', 'a', 0343},
+ {'"', 'A', 0304}, {'"', 'a', 0344},
+ {'O', 'A', 0305}, {'o', 'a', 0345},
+ {'0', 'A', 0305}, {'0', 'a', 0345},
+ {'A', 'A', 0305}, {'a', 'a', 0345},
+ {'A', 'E', 0306}, {'a', 'e', 0346},
+ {',', 'C', 0307}, {',', 'c', 0347},
+ {'`', 'E', 0310}, {'`', 'e', 0350},
+ {'\'', 'E', 0311}, {'\'', 'e', 0351},
+ {'^', 'E', 0312}, {'^', 'e', 0352},
+ {'"', 'E', 0313}, {'"', 'e', 0353},
+ {'`', 'I', 0314}, {'`', 'i', 0354},
+ {'\'', 'I', 0315}, {'\'', 'i', 0355},
+ {'^', 'I', 0316}, {'^', 'i', 0356},
+ {'"', 'I', 0317}, {'"', 'i', 0357},
+ {'-', 'D', 0320}, {'-', 'd', 0360},
+ {'~', 'N', 0321}, {'~', 'n', 0361},
+ {'`', 'O', 0322}, {'`', 'o', 0362},
+ {'\'', 'O', 0323}, {'\'', 'o', 0363},
+ {'^', 'O', 0324}, {'^', 'o', 0364},
+ {'~', 'O', 0325}, {'~', 'o', 0365},
+ {'"', 'O', 0326}, {'"', 'o', 0366},
+ {'/', 'O', 0330}, {'/', 'o', 0370},
+ {'`', 'U', 0331}, {'`', 'u', 0371},
+ {'\'', 'U', 0332}, {'\'', 'u', 0372},
+ {'^', 'U', 0333}, {'^', 'u', 0373},
+ {'"', 'U', 0334}, {'"', 'u', 0374},
+ {'\'', 'Y', 0335}, {'\'', 'y', 0375},
+ {'T', 'H', 0336}, {'t', 'h', 0376},
+ {'s', 's', 0337}, {'"', 'y', 0377},
+ {'s', 'z', 0337}, {'i', 'j', 0377},
};
unsigned int accent_table_size = 68;
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
/* ap->flags bits */
static void ahci_p5wdh_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
+ .dev_config = ahci_dev_config,
+
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
/* board_ahci_sb600 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
VPRINTK("HOST_CTL 0x%x\n", tmp);
}
+static void ahci_dev_config(struct ata_device *dev)
+{
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ if (hpriv->flags & AHCI_HFLAG_SECT255)
+ dev->max_sectors = 255;
+}
+
static unsigned int ahci_dev_classify(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct request_queue *q = sdev->request_queue;
void *buf;
- /* set the min alignment */
+ /* set the min alignment and padding */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
+ blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd);
+ qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(scmd->request->raw_data_len, (unsigned int)63 * 1024);
+ nbytes = min(scmd->request->data_len, (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd);
+ qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.1"
+#define DRV_VERSION "0.6.2"
struct hpt_clock {
u8 xfer_speed;
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
- mask &= ~(0x07 << ATA_SHIFT_UDMA);
+ mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
- mask &= ~(0x0F << ATA_SHIFT_UDMA);
+ mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.9"
+#define DRV_VERSION "0.6.11"
struct hpt_clock {
u8 xfer_speed;
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
- mask &= ~(0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
{
if (adev->class == ATA_DEV_ATA) {
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
- mask &= ~ (0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
if (!strcmp(p, model_num))
- mask &= ~(0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
{
/* see if we live in a "glue" directory */
- if (!dev->class || glue_dir->kset != &dev->class->class_dirs)
+ if (!glue_dir || !dev->class ||
+ glue_dir->kset != &dev->class->class_dirs)
return;
kobject_put(glue_dir);
struct class_interface *class_intf;
int error;
- error = pm_sleep_lock();
- if (error) {
- dev_warn(dev, "Suspicious %s during suspend\n", __FUNCTION__);
- dump_stack();
- return error;
- }
-
dev = get_device(dev);
if (!dev || !strlen(dev->bus_id)) {
error = -EINVAL;
- goto Error;
+ goto Done;
}
pr_debug("device: '%s': %s\n", dev->bus_id, __FUNCTION__);
}
Done:
put_device(dev);
- pm_sleep_unlock();
return error;
BusError:
device_pm_remove(dev);
- dpm_sysfs_remove(dev);
PMError:
if (dev->bus)
blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
*/
LIST_HEAD(dpm_active);
-static LIST_HEAD(dpm_locked);
static LIST_HEAD(dpm_off);
static LIST_HEAD(dpm_off_irq);
static LIST_HEAD(dpm_destroy);
*/
void device_pm_remove(struct device *dev)
{
- /*
- * If this function is called during a suspend, it will be blocked,
- * because we're holding the device's semaphore at that time, which may
- * lead to a deadlock. In that case we want to print a warning.
- * However, it may also be called by unregister_dropped_devices() with
- * the device's semaphore released, in which case the warning should
- * not be printed.
- */
- if (down_trylock(&dev->sem)) {
- if (down_read_trylock(&pm_sleep_rwsem)) {
- /* No suspend in progress, wait on dev->sem */
- down(&dev->sem);
- up_read(&pm_sleep_rwsem);
- } else {
- /* Suspend in progress, we may deadlock */
- dev_warn(dev, "Suspicious %s during suspend\n",
- __FUNCTION__);
- dump_stack();
- /* The user has been warned ... */
- down(&dev->sem);
- }
- }
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
- up(&dev->sem);
}
/**
TRACE_DEVICE(dev);
TRACE_RESUME(0);
+ down(&dev->sem);
+
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
error = dev->bus->resume(dev);
error = dev->class->resume(dev);
}
+ up(&dev->sem);
+
TRACE_RESUME(error);
return error;
}
struct list_head *entry = dpm_off.next;
struct device *dev = to_device(entry);
- list_move_tail(entry, &dpm_locked);
+ list_move_tail(entry, &dpm_active);
mutex_unlock(&dpm_list_mtx);
resume_device(dev);
mutex_lock(&dpm_list_mtx);
mutex_unlock(&dpm_list_mtx);
}
-/**
- * unlock_all_devices - Release each device's semaphore
- *
- * Go through the dpm_off list. Put each device on the dpm_active
- * list and unlock it.
- */
-static void unlock_all_devices(void)
-{
- mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_locked)) {
- struct list_head *entry = dpm_locked.prev;
- struct device *dev = to_device(entry);
-
- list_move(entry, &dpm_active);
- up(&dev->sem);
- }
- mutex_unlock(&dpm_list_mtx);
-}
-
/**
* unregister_dropped_devices - Unregister devices scheduled for removal
*
struct list_head *entry = dpm_destroy.next;
struct device *dev = to_device(entry);
- up(&dev->sem);
mutex_unlock(&dpm_list_mtx);
/* This also removes the device from the list */
device_unregister(dev);
{
might_sleep();
dpm_resume();
- unlock_all_devices();
unregister_dropped_devices();
up_write(&pm_sleep_rwsem);
}
struct list_head *entry = dpm_off.prev;
struct device *dev = to_device(entry);
- list_del_init(&dev->power.entry);
error = suspend_device_late(dev, state);
if (error) {
printk(KERN_ERR "Could not power down device %s: "
"error %d\n",
kobject_name(&dev->kobj), error);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off);
break;
}
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off_irq);
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off_irq);
}
if (!error)
{
int error = 0;
+ down(&dev->sem);
+
if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
error = dev->bus->suspend(dev, state);
suspend_report_result(dev->bus->suspend, error);
}
+
+ up(&dev->sem);
+
return error;
}
int error = 0;
mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_locked)) {
- struct list_head *entry = dpm_locked.prev;
+ while (!list_empty(&dpm_active)) {
+ struct list_head *entry = dpm_active.prev;
struct device *dev = to_device(entry);
- list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
error = suspend_device(dev, state);
+ mutex_lock(&dpm_list_mtx);
if (error) {
printk(KERN_ERR "Could not suspend device %s: "
"error %d%s\n",
(error == -EAGAIN ?
" (please convert to suspend_late)" :
""));
- mutex_lock(&dpm_list_mtx);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_locked);
break;
}
- mutex_lock(&dpm_list_mtx);
- if (list_empty(&dev->power.entry))
- list_add(&dev->power.entry, &dpm_off);
+ if (!list_empty(&dev->power.entry))
+ list_move(&dev->power.entry, &dpm_off);
}
mutex_unlock(&dpm_list_mtx);
return error;
}
-/**
- * lock_all_devices - Acquire every device's semaphore
- *
- * Go through the dpm_active list. Carefully lock each device's
- * semaphore and put it in on the dpm_locked list.
- */
-static void lock_all_devices(void)
-{
- mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active)) {
- struct list_head *entry = dpm_active.next;
- struct device *dev = to_device(entry);
-
- /* Required locking order is dev->sem first,
- * then dpm_list_mutex. Hence this awkward code.
- */
- get_device(dev);
- mutex_unlock(&dpm_list_mtx);
- down(&dev->sem);
- mutex_lock(&dpm_list_mtx);
-
- if (list_empty(entry))
- up(&dev->sem); /* Device was removed */
- else
- list_move_tail(entry, &dpm_locked);
- put_device(dev);
- }
- mutex_unlock(&dpm_list_mtx);
-}
-
/**
* device_suspend - Save state and stop all devices in system.
* @state: new power management state
might_sleep();
down_write(&pm_sleep_rwsem);
- lock_all_devices();
error = dpm_suspend(state);
if (error)
device_resume();
}
/**
- * transport_setup_device - declare a new dev for transport class association
- * but don't make it visible yet.
- *
+ * transport_setup_device - declare a new dev for transport class association but don't make it visible yet.
* @dev: the generic device representing the entity being added
*
* Usually, dev represents some component in the HBA system (either
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
-#define READ_AHEAD 1024
#define MAX_CTLR 32
/* Originally cciss driver only supports 8 major numbers */
static void fail_all_cmds(unsigned long ctlr);
#ifdef CONFIG_PROC_FS
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data);
static void cciss_procinit(int i);
#else
static void cciss_procinit(int i)
*/
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
+#define ENGAGE_SCSI "engage scsi"
static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
"UNKNOWN"
};
static struct proc_dir_entry *proc_cciss;
-static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
- int length, int *eof, void *data)
+static void cciss_seq_show_header(struct seq_file *seq)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t *) data;
- drive_info_struct *drv;
- unsigned long flags;
- sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+
+ seq_printf(seq, "%s: HP %s Controller\n"
+ "Board ID: 0x%08lx\n"
+ "Firmware Version: %c%c%c%c\n"
+ "IRQ: %d\n"
+ "Logical drives: %d\n"
+ "Current Q depth: %d\n"
+ "Current # commands on controller: %d\n"
+ "Max Q depth since init: %d\n"
+ "Max # commands on controller since init: %d\n"
+ "Max SG entries since init: %d\n",
+ h->devname,
+ h->product_name,
+ (unsigned long)h->board_id,
+ h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
+ h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
+ h->num_luns,
+ h->Qdepth, h->commands_outstanding,
+ h->maxQsinceinit, h->max_outstanding, h->maxSG);
- ctlr = h->ctlr;
+#ifdef CONFIG_CISS_SCSI_TAPE
+ cciss_seq_tape_report(seq, h->ctlr);
+#endif /* CONFIG_CISS_SCSI_TAPE */
+}
+
+static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ unsigned long flags;
/* prevent displaying bogus info during configuration
* or deconfiguration of a logical volume
spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
if (h->busy_configuring) {
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- return -EBUSY;
+ return ERR_PTR(-EBUSY);
}
h->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
- size = sprintf(buffer, "%s: HP %s Controller\n"
- "Board ID: 0x%08lx\n"
- "Firmware Version: %c%c%c%c\n"
- "IRQ: %d\n"
- "Logical drives: %d\n"
- "Max sectors: %d\n"
- "Current Q depth: %d\n"
- "Current # commands on controller: %d\n"
- "Max Q depth since init: %d\n"
- "Max # commands on controller since init: %d\n"
- "Max SG entries since init: %d\n\n",
- h->devname,
- h->product_name,
- (unsigned long)h->board_id,
- h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
- h->num_luns,
- h->cciss_max_sectors,
- h->Qdepth, h->commands_outstanding,
- h->maxQsinceinit, h->max_outstanding, h->maxSG);
-
- pos += size;
- len += size;
- cciss_proc_tape_report(ctlr, buffer, &pos, &len);
- for (i = 0; i <= h->highest_lun; i++) {
-
- drv = &h->drv[i];
- if (drv->heads == 0)
- continue;
+ if (*pos == 0)
+ cciss_seq_show_header(seq);
- vol_sz = drv->nr_blocks;
- vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
- vol_sz_frac *= 100;
- sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+ return pos;
+}
+
+static int cciss_seq_show(struct seq_file *seq, void *v)
+{
+ sector_t vol_sz, vol_sz_frac;
+ ctlr_info_t *h = seq->private;
+ unsigned ctlr = h->ctlr;
+ loff_t *pos = v;
+ drive_info_struct *drv = &h->drv[*pos];
+
+ if (*pos > h->highest_lun)
+ return 0;
+
+ if (drv->heads == 0)
+ return 0;
+
+ vol_sz = drv->nr_blocks;
+ vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
+ vol_sz_frac *= 100;
+ sector_div(vol_sz_frac, ENG_GIG_FACTOR);
+
+ if (drv->raid_level > 5)
+ drv->raid_level = RAID_UNKNOWN;
+ seq_printf(seq, "cciss/c%dd%d:"
+ "\t%4u.%02uGB\tRAID %s\n",
+ ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
+ raid_label[drv->raid_level]);
+ return 0;
+}
+
+static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ctlr_info_t *h = seq->private;
+
+ if (*pos > h->highest_lun)
+ return NULL;
+ *pos += 1;
+
+ return pos;
+}
+
+static void cciss_seq_stop(struct seq_file *seq, void *v)
+{
+ ctlr_info_t *h = seq->private;
+
+ /* Only reset h->busy_configuring if we succeeded in setting
+ * it during cciss_seq_start. */
+ if (v == ERR_PTR(-EBUSY))
+ return;
- if (drv->raid_level > 5)
- drv->raid_level = RAID_UNKNOWN;
- size = sprintf(buffer + len, "cciss/c%dd%d:"
- "\t%4u.%02uGB\tRAID %s\n",
- ctlr, i, (int)vol_sz, (int)vol_sz_frac,
- raid_label[drv->raid_level]);
- pos += size;
- len += size;
- }
-
- *eof = 1;
- *start = buffer + offset;
- len -= offset;
- if (len > length)
- len = length;
h->busy_configuring = 0;
- return len;
}
-static int
-cciss_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static struct seq_operations cciss_seq_ops = {
+ .start = cciss_seq_start,
+ .show = cciss_seq_show,
+ .next = cciss_seq_next,
+ .stop = cciss_seq_stop,
+};
+
+static int cciss_seq_open(struct inode *inode, struct file *file)
{
- unsigned char cmd[80];
- int len;
-#ifdef CONFIG_CISS_SCSI_TAPE
- ctlr_info_t *h = (ctlr_info_t *) data;
- int rc;
+ int ret = seq_open(file, &cciss_seq_ops);
+ struct seq_file *seq = file->private_data;
+
+ if (!ret)
+ seq->private = PDE(inode)->data;
+
+ return ret;
+}
+
+static ssize_t
+cciss_proc_write(struct file *file, const char __user *buf,
+ size_t length, loff_t *ppos)
+{
+ int err;
+ char *buffer;
+
+#ifndef CONFIG_CISS_SCSI_TAPE
+ return -EINVAL;
#endif
- if (count > sizeof(cmd) - 1)
+ if (!buf || length > PAGE_SIZE - 1)
return -EINVAL;
- if (copy_from_user(cmd, buffer, count))
- return -EFAULT;
- cmd[count] = '\0';
- len = strlen(cmd); // above 3 lines ensure safety
- if (len && cmd[len - 1] == '\n')
- cmd[--len] = '\0';
-# ifdef CONFIG_CISS_SCSI_TAPE
- if (strcmp("engage scsi", cmd) == 0) {
+
+ buffer = (char *)__get_free_page(GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ err = -EFAULT;
+ if (copy_from_user(buffer, buf, length))
+ goto out;
+ buffer[length] = '\0';
+
+#ifdef CONFIG_CISS_SCSI_TAPE
+ if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
+ struct seq_file *seq = file->private_data;
+ ctlr_info_t *h = seq->private;
+ int rc;
+
rc = cciss_engage_scsi(h->ctlr);
if (rc != 0)
- return -rc;
- return count;
- }
+ err = -rc;
+ else
+ err = length;
+ } else
+#endif /* CONFIG_CISS_SCSI_TAPE */
+ err = -EINVAL;
/* might be nice to have "disengage" too, but it's not
safely possible. (only 1 module use count, lock issues.) */
-# endif
- return -EINVAL;
+
+out:
+ free_page((unsigned long)buffer);
+ return err;
}
-/*
- * Get us a file in /proc/cciss that says something about each controller.
- * Create /proc/cciss if it doesn't exist yet.
- */
+static struct file_operations cciss_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = cciss_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = cciss_proc_write,
+};
+
static void __devinit cciss_procinit(int i)
{
struct proc_dir_entry *pde;
- if (proc_cciss == NULL) {
+ if (proc_cciss == NULL)
proc_cciss = proc_mkdir("cciss", proc_root_driver);
- if (!proc_cciss)
- return;
- }
+ if (!proc_cciss)
+ return;
+ pde = proc_create(hba[i]->devname, S_IWUSR | S_IRUSR | S_IRGRP |
+ S_IROTH, proc_cciss,
+ &cciss_proc_fops);
+ if (!pde)
+ return;
- pde = create_proc_read_entry(hba[i]->devname,
- S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
- proc_cciss, cciss_proc_get_info, hba[i]);
- pde->write_proc = cciss_proc_write;
+ pde->data = hba[i];
}
#endif /* CONFIG_PROC_FS */
disk->private_data = &h->drv[drv_index];
/* Set up queue information */
- disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
/* This is a hardware imposed limit. */
}
drv->queue = q;
- q->backing_dev_info.ra_pages = READ_AHEAD;
blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
/* This is a hardware imposed limit. */
}
static void
-cciss_proc_tape_report(int ctlr, unsigned char *buffer, off_t *pos, off_t *len)
+cciss_seq_tape_report(struct seq_file *seq, int ctlr)
{
unsigned long flags;
- int size;
-
- *pos = *pos -1; *len = *len - 1; // cut off the last trailing newline
CPQ_TAPE_LOCK(ctlr, flags);
- size = sprintf(buffer + *len,
+ seq_printf(seq,
"Sequential access devices: %d\n\n",
ccissscsi[ctlr].ndevices);
CPQ_TAPE_UNLOCK(ctlr, flags);
- *pos += size; *len += size;
}
+
/* Need at least one of these error handlers to keep ../scsi/hosts.c from
* complaining. Doing a host- or bus-reset can't do anything good here.
* Despite what it might say in scsi_error.c, there may well be commands
#define cciss_scsi_setup(cntl_num)
#define cciss_unregister_scsi(ctlr)
#define cciss_register_scsi(ctlr)
-#define cciss_proc_tape_report(ctlr, buffer, pos, len)
#endif /* CONFIG_CISS_SCSI_TAPE */
/*
* speed is given as the normal factor, e.g. 4 for 4x
*/
-static int pkt_set_speed(struct pktcdvd_device *pd, unsigned write_speed, unsigned read_speed)
+static noinline_for_stack int pkt_set_speed(struct pktcdvd_device *pd,
+ unsigned write_speed, unsigned read_speed)
{
struct packet_command cgc;
struct request_sense sense;
return pkt_generic_packet(pd, &cgc);
}
-static int pkt_get_last_written(struct pktcdvd_device *pd, long *last_written)
+static noinline_for_stack int pkt_get_last_written(struct pktcdvd_device *pd,
+ long *last_written)
{
disc_information di;
track_information ti;
/*
* write mode select package based on pd->settings
*/
-static int pkt_set_write_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_set_write_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
return 1;
}
-static int pkt_probe_settings(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_probe_settings(struct pktcdvd_device *pd)
{
struct packet_command cgc;
unsigned char buf[12];
/*
* enable/disable write caching on drive
*/
-static int pkt_write_caching(struct pktcdvd_device *pd, int set)
+static noinline_for_stack int pkt_write_caching(struct pktcdvd_device *pd,
+ int set)
{
struct packet_command cgc;
struct request_sense sense;
/*
* Returns drive maximum write speed
*/
-static int pkt_get_max_speed(struct pktcdvd_device *pd, unsigned *write_speed)
+static noinline_for_stack int pkt_get_max_speed(struct pktcdvd_device *pd,
+ unsigned *write_speed)
{
struct packet_command cgc;
struct request_sense sense;
/*
* reads the maximum media speed from ATIP
*/
-static int pkt_media_speed(struct pktcdvd_device *pd, unsigned *speed)
+static noinline_for_stack int pkt_media_speed(struct pktcdvd_device *pd,
+ unsigned *speed)
{
struct packet_command cgc;
struct request_sense sense;
}
}
-static int pkt_perform_opc(struct pktcdvd_device *pd)
+static noinline_for_stack int pkt_perform_opc(struct pktcdvd_device *pd)
{
struct packet_command cgc;
struct request_sense sense;
/* This code is similar to that in open_for_data. The routine is called
whenever an audio play operation is requested.
*/
-int check_for_audio_disc(struct cdrom_device_info * cdi,
- struct cdrom_device_ops * cdo)
+static int check_for_audio_disc(struct cdrom_device_info * cdi,
+ struct cdrom_device_ops * cdo)
{
int ret;
tracktype tracks;
};
struct kbdiacruc accent_table[MAX_DIACR] = {
- {'`', 'A', '\300'}, {'`', 'a', '\340'},
- {'\'', 'A', '\301'}, {'\'', 'a', '\341'},
- {'^', 'A', '\302'}, {'^', 'a', '\342'},
- {'~', 'A', '\303'}, {'~', 'a', '\343'},
- {'"', 'A', '\304'}, {'"', 'a', '\344'},
- {'O', 'A', '\305'}, {'o', 'a', '\345'},
- {'0', 'A', '\305'}, {'0', 'a', '\345'},
- {'A', 'A', '\305'}, {'a', 'a', '\345'},
- {'A', 'E', '\306'}, {'a', 'e', '\346'},
- {',', 'C', '\307'}, {',', 'c', '\347'},
- {'`', 'E', '\310'}, {'`', 'e', '\350'},
- {'\'', 'E', '\311'}, {'\'', 'e', '\351'},
- {'^', 'E', '\312'}, {'^', 'e', '\352'},
- {'"', 'E', '\313'}, {'"', 'e', '\353'},
- {'`', 'I', '\314'}, {'`', 'i', '\354'},
- {'\'', 'I', '\315'}, {'\'', 'i', '\355'},
- {'^', 'I', '\316'}, {'^', 'i', '\356'},
- {'"', 'I', '\317'}, {'"', 'i', '\357'},
- {'-', 'D', '\320'}, {'-', 'd', '\360'},
- {'~', 'N', '\321'}, {'~', 'n', '\361'},
- {'`', 'O', '\322'}, {'`', 'o', '\362'},
- {'\'', 'O', '\323'}, {'\'', 'o', '\363'},
- {'^', 'O', '\324'}, {'^', 'o', '\364'},
- {'~', 'O', '\325'}, {'~', 'o', '\365'},
- {'"', 'O', '\326'}, {'"', 'o', '\366'},
- {'/', 'O', '\330'}, {'/', 'o', '\370'},
- {'`', 'U', '\331'}, {'`', 'u', '\371'},
- {'\'', 'U', '\332'}, {'\'', 'u', '\372'},
- {'^', 'U', '\333'}, {'^', 'u', '\373'},
- {'"', 'U', '\334'}, {'"', 'u', '\374'},
- {'\'', 'Y', '\335'}, {'\'', 'y', '\375'},
- {'T', 'H', '\336'}, {'t', 'h', '\376'},
- {'s', 's', '\337'}, {'"', 'y', '\377'},
- {'s', 'z', '\337'}, {'i', 'j', '\377'},
+ {'`', 'A', 0300}, {'`', 'a', 0340},
+ {'\'', 'A', 0301}, {'\'', 'a', 0341},
+ {'^', 'A', 0302}, {'^', 'a', 0342},
+ {'~', 'A', 0303}, {'~', 'a', 0343},
+ {'"', 'A', 0304}, {'"', 'a', 0344},
+ {'O', 'A', 0305}, {'o', 'a', 0345},
+ {'0', 'A', 0305}, {'0', 'a', 0345},
+ {'A', 'A', 0305}, {'a', 'a', 0345},
+ {'A', 'E', 0306}, {'a', 'e', 0346},
+ {',', 'C', 0307}, {',', 'c', 0347},
+ {'`', 'E', 0310}, {'`', 'e', 0350},
+ {'\'', 'E', 0311}, {'\'', 'e', 0351},
+ {'^', 'E', 0312}, {'^', 'e', 0352},
+ {'"', 'E', 0313}, {'"', 'e', 0353},
+ {'`', 'I', 0314}, {'`', 'i', 0354},
+ {'\'', 'I', 0315}, {'\'', 'i', 0355},
+ {'^', 'I', 0316}, {'^', 'i', 0356},
+ {'"', 'I', 0317}, {'"', 'i', 0357},
+ {'-', 'D', 0320}, {'-', 'd', 0360},
+ {'~', 'N', 0321}, {'~', 'n', 0361},
+ {'`', 'O', 0322}, {'`', 'o', 0362},
+ {'\'', 'O', 0323}, {'\'', 'o', 0363},
+ {'^', 'O', 0324}, {'^', 'o', 0364},
+ {'~', 'O', 0325}, {'~', 'o', 0365},
+ {'"', 'O', 0326}, {'"', 'o', 0366},
+ {'/', 'O', 0330}, {'/', 'o', 0370},
+ {'`', 'U', 0331}, {'`', 'u', 0371},
+ {'\'', 'U', 0332}, {'\'', 'u', 0372},
+ {'^', 'U', 0333}, {'^', 'u', 0373},
+ {'"', 'U', 0334}, {'"', 'u', 0374},
+ {'\'', 'Y', 0335}, {'\'', 'y', 0375},
+ {'T', 'H', 0336}, {'t', 'h', 0376},
+ {'s', 's', 0337}, {'"', 'y', 0377},
+ {'s', 'z', 0337}, {'i', 'j', 0377},
};
unsigned int accent_table_size = 68;
msleep(10);
portcount = inw(base + 0x2);
- if (!inw(base + 0xe) & 0x1 || (portcount != 0 && portcount != 4 &&
+ if (!(inw(base + 0xe) & 0x1) || (portcount != 0 && portcount != 4 &&
portcount != 8 && portcount != 16)) {
dev_err(&pdev->dev, "ISILoad:PCI Card%d reset failure.\n",
card + 1);
for (i = 0; i < MAX_ASSOCIATED_TTYS; i++) {
struct ipw_tty *tty = network->associated_ttys[channel_idx][i];
+ if (!tty)
+ continue;
+
/*
* If it's associated with a tty (other than the RAS channel
* when we're online), then send the data to that tty. The RAS
* channel's data is handled above - it always goes through
* ppp_generic.
*/
- if (tty && channel_idx == IPW_CHANNEL_RAS
+ if (channel_idx == IPW_CHANNEL_RAS
&& (network->ras_control_lines &
IPW_CONTROL_LINE_DCD) != 0
&& ipwireless_tty_is_modem(tty)) {
sx_out(bp, CD186x_CAR, port_No(port));
spin_unlock_irqrestore(&bp->lock, flags);
if (I_IXOFF(tty)) {
- spin_unlock_irqrestore(&bp->lock, flags);
sx_wait_CCR(bp);
spin_lock_irqsave(&bp->lock, flags);
sx_out(bp, CD186x_CCR, CCR_SSCH2);
if (is_switch) {
set_leds();
compute_shiftstate();
+ notify_update(vc);
}
}
{
struct cpufreq_policy * policy = to_policy(kobj);
struct freq_attr * fattr = to_attr(attr);
- ssize_t ret;
+ ssize_t ret = -EINVAL;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
- return -EINVAL;
+ goto no_policy;
if (lock_policy_rwsem_read(policy->cpu) < 0)
- return -EINVAL;
+ goto fail;
if (fattr->show)
ret = fattr->show(policy, buf);
ret = -EIO;
unlock_policy_rwsem_read(policy->cpu);
-
+fail:
cpufreq_cpu_put(policy);
+no_policy:
return ret;
}
{
struct cpufreq_policy * policy = to_policy(kobj);
struct freq_attr * fattr = to_attr(attr);
- ssize_t ret;
+ ssize_t ret = -EINVAL;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
- return -EINVAL;
+ goto no_policy;
if (lock_policy_rwsem_write(policy->cpu) < 0)
- return -EINVAL;
+ goto fail;
if (fattr->store)
ret = fattr->store(policy, buf, count);
ret = -EIO;
unlock_policy_rwsem_write(policy->cpu);
-
+fail:
cpufreq_cpu_put(policy);
+no_policy:
return ret;
}
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata cpufreq_cpu_notifier =
+static struct notifier_block __refdata cpufreq_cpu_notifier =
{
.notifier_call = cpufreq_cpu_callback,
};
return NOTIFY_OK;
}
-static struct notifier_block cpufreq_stat_cpu_notifier __cpuinitdata =
+static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
{
.notifier_call = cpufreq_stat_cpu_callback,
};
menuconfig DMADEVICES
bool "DMA Engine support"
- depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX
+ depends on (PCI && X86) || ARCH_IOP32X || ARCH_IOP33X || ARCH_IOP13XX || PPC
depends on !HIGHMEM64G
help
DMA engines can do asynchronous data transfers without
help
Enable support for the Intel(R) IOP Series RAID engines.
+config FSL_DMA
+ bool "Freescale MPC85xx/MPC83xx DMA support"
+ depends on PPC
+ select DMA_ENGINE
+ ---help---
+ Enable support for the Freescale DMA engine. Now, it support
+ MPC8560/40, MPC8555, MPC8548 and MPC8641 processors.
+ The MPC8349, MPC8360 is also supported.
+
+config FSL_DMA_SELFTEST
+ bool "Enable the self test for each DMA channel"
+ depends on FSL_DMA
+ default y
+ ---help---
+ Enable the self test for each DMA channel. A self test will be
+ performed after the channel probed to ensure the DMA works well.
+
config DMA_ENGINE
bool
obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
+obj-$(CONFIG_FSL_DMA) += fsldma.o
--- /dev/null
+/*
+ * Freescale MPC85xx, MPC83xx DMA Engine support
+ *
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author:
+ * Zhang Wei <wei.zhang@freescale.com>, Jul 2007
+ * Ebony Zhu <ebony.zhu@freescale.com>, May 2007
+ *
+ * Description:
+ * DMA engine driver for Freescale MPC8540 DMA controller, which is
+ * also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
+ * The support for MPC8349 DMA contorller is also added.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/of_platform.h>
+
+#include "fsldma.h"
+
+static void dma_init(struct fsl_dma_chan *fsl_chan)
+{
+ /* Reset the channel */
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, 0, 32);
+
+ switch (fsl_chan->feature & FSL_DMA_IP_MASK) {
+ case FSL_DMA_IP_85XX:
+ /* Set the channel to below modes:
+ * EIE - Error interrupt enable
+ * EOSIE - End of segments interrupt enable (basic mode)
+ * EOLNIE - End of links interrupt enable
+ */
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EIE
+ | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
+ break;
+ case FSL_DMA_IP_83XX:
+ /* Set the channel to below modes:
+ * EOTIE - End-of-transfer interrupt enable
+ */
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
+ 32);
+ break;
+ }
+
+}
+
+static void set_sr(struct fsl_dma_chan *fsl_chan, dma_addr_t val)
+{
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->sr, val, 32);
+}
+
+static dma_addr_t get_sr(struct fsl_dma_chan *fsl_chan)
+{
+ return DMA_IN(fsl_chan, &fsl_chan->reg_base->sr, 32);
+}
+
+static void set_desc_cnt(struct fsl_dma_chan *fsl_chan,
+ struct fsl_dma_ld_hw *hw, u32 count)
+{
+ hw->count = CPU_TO_DMA(fsl_chan, count, 32);
+}
+
+static void set_desc_src(struct fsl_dma_chan *fsl_chan,
+ struct fsl_dma_ld_hw *hw, dma_addr_t src)
+{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX)
+ ? ((u64)FSL_DMA_SATR_SREADTYPE_SNOOP_READ << 32) : 0;
+ hw->src_addr = CPU_TO_DMA(fsl_chan, snoop_bits | src, 64);
+}
+
+static void set_desc_dest(struct fsl_dma_chan *fsl_chan,
+ struct fsl_dma_ld_hw *hw, dma_addr_t dest)
+{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX)
+ ? ((u64)FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE << 32) : 0;
+ hw->dst_addr = CPU_TO_DMA(fsl_chan, snoop_bits | dest, 64);
+}
+
+static void set_desc_next(struct fsl_dma_chan *fsl_chan,
+ struct fsl_dma_ld_hw *hw, dma_addr_t next)
+{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+ hw->next_ln_addr = CPU_TO_DMA(fsl_chan, snoop_bits | next, 64);
+}
+
+static void set_cdar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr)
+{
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->cdar, addr | FSL_DMA_SNEN, 64);
+}
+
+static dma_addr_t get_cdar(struct fsl_dma_chan *fsl_chan)
+{
+ return DMA_IN(fsl_chan, &fsl_chan->reg_base->cdar, 64) & ~FSL_DMA_SNEN;
+}
+
+static void set_ndar(struct fsl_dma_chan *fsl_chan, dma_addr_t addr)
+{
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->ndar, addr, 64);
+}
+
+static dma_addr_t get_ndar(struct fsl_dma_chan *fsl_chan)
+{
+ return DMA_IN(fsl_chan, &fsl_chan->reg_base->ndar, 64);
+}
+
+static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
+{
+ u32 sr = get_sr(fsl_chan);
+ return (!(sr & FSL_DMA_SR_CB)) || (sr & FSL_DMA_SR_CH);
+}
+
+static void dma_start(struct fsl_dma_chan *fsl_chan)
+{
+ u32 mr_set = 0;;
+
+ if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
+ mr_set |= FSL_DMA_MR_EMP_EN;
+ } else
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ & ~FSL_DMA_MR_EMP_EN, 32);
+
+ if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
+ mr_set |= FSL_DMA_MR_EMS_EN;
+ else
+ mr_set |= FSL_DMA_MR_CS;
+
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ | mr_set, 32);
+}
+
+static void dma_halt(struct fsl_dma_chan *fsl_chan)
+{
+ int i = 0;
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
+ 32);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
+ | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
+
+ while (!dma_is_idle(fsl_chan) && (i++ < 100))
+ udelay(10);
+ if (i >= 100 && !dma_is_idle(fsl_chan))
+ dev_err(fsl_chan->dev, "DMA halt timeout!\n");
+}
+
+static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
+ struct fsl_desc_sw *desc)
+{
+ desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
+ 64);
+}
+
+static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
+ struct fsl_desc_sw *new_desc)
+{
+ struct fsl_desc_sw *queue_tail = to_fsl_desc(fsl_chan->ld_queue.prev);
+
+ if (list_empty(&fsl_chan->ld_queue))
+ return;
+
+ /* Link to the new descriptor physical address and
+ * Enable End-of-segment interrupt for
+ * the last link descriptor.
+ * (the previous node's next link descriptor)
+ *
+ * For FSL_DMA_IP_83xx, the snoop enable bit need be set.
+ */
+ queue_tail->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
+ new_desc->async_tx.phys | FSL_DMA_EOSIE |
+ (((fsl_chan->feature & FSL_DMA_IP_MASK)
+ == FSL_DMA_IP_83XX) ? FSL_DMA_SNEN : 0), 64);
+}
+
+/**
+ * fsl_chan_set_src_loop_size - Set source address hold transfer size
+ * @fsl_chan : Freescale DMA channel
+ * @size : Address loop size, 0 for disable loop
+ *
+ * The set source address hold transfer size. The source
+ * address hold or loop transfer size is when the DMA transfer
+ * data from source address (SA), if the loop size is 4, the DMA will
+ * read data from SA, SA + 1, SA + 2, SA + 3, then loop back to SA,
+ * SA + 1 ... and so on.
+ */
+static void fsl_chan_set_src_loop_size(struct fsl_dma_chan *fsl_chan, int size)
+{
+ switch (size) {
+ case 0:
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) &
+ (~FSL_DMA_MR_SAHE), 32);
+ break;
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) |
+ FSL_DMA_MR_SAHE | (__ilog2(size) << 14),
+ 32);
+ break;
+ }
+}
+
+/**
+ * fsl_chan_set_dest_loop_size - Set destination address hold transfer size
+ * @fsl_chan : Freescale DMA channel
+ * @size : Address loop size, 0 for disable loop
+ *
+ * The set destination address hold transfer size. The destination
+ * address hold or loop transfer size is when the DMA transfer
+ * data to destination address (TA), if the loop size is 4, the DMA will
+ * write data to TA, TA + 1, TA + 2, TA + 3, then loop back to TA,
+ * TA + 1 ... and so on.
+ */
+static void fsl_chan_set_dest_loop_size(struct fsl_dma_chan *fsl_chan, int size)
+{
+ switch (size) {
+ case 0:
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) &
+ (~FSL_DMA_MR_DAHE), 32);
+ break;
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) |
+ FSL_DMA_MR_DAHE | (__ilog2(size) << 16),
+ 32);
+ break;
+ }
+}
+
+/**
+ * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * @fsl_chan : Freescale DMA channel
+ * @size : Pause control size, 0 for disable external pause control.
+ * The maximum is 1024.
+ *
+ * The Freescale DMA channel can be controlled by the external
+ * signal DREQ#. The pause control size is how many bytes are allowed
+ * to transfer before pausing the channel, after which a new assertion
+ * of DREQ# resumes channel operation.
+ */
+static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size)
+{
+ if (size > 1024)
+ return;
+
+ if (size) {
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ | ((__ilog2(size) << 24) & 0x0f000000),
+ 32);
+ fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT;
+ } else
+ fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT;
+}
+
+/**
+ * fsl_chan_toggle_ext_start - Toggle channel external start status
+ * @fsl_chan : Freescale DMA channel
+ * @enable : 0 is disabled, 1 is enabled.
+ *
+ * If enable the external start, the channel can be started by an
+ * external DMA start pin. So the dma_start() does not start the
+ * transfer immediately. The DMA channel will wait for the
+ * control pin asserted.
+ */
+static void fsl_chan_toggle_ext_start(struct fsl_dma_chan *fsl_chan, int enable)
+{
+ if (enable)
+ fsl_chan->feature |= FSL_DMA_CHAN_START_EXT;
+ else
+ fsl_chan->feature &= ~FSL_DMA_CHAN_START_EXT;
+}
+
+static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ unsigned long flags;
+ dma_cookie_t cookie;
+
+ /* cookie increment and adding to ld_queue must be atomic */
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ cookie = fsl_chan->common.cookie;
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+ desc->async_tx.cookie = cookie;
+ fsl_chan->common.cookie = desc->async_tx.cookie;
+
+ append_ld_queue(fsl_chan, desc);
+ list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+
+ return cookie;
+}
+
+/**
+ * fsl_dma_alloc_descriptor - Allocate descriptor from channel's DMA pool.
+ * @fsl_chan : Freescale DMA channel
+ *
+ * Return - The descriptor allocated. NULL for failed.
+ */
+static struct fsl_desc_sw *fsl_dma_alloc_descriptor(
+ struct fsl_dma_chan *fsl_chan)
+{
+ dma_addr_t pdesc;
+ struct fsl_desc_sw *desc_sw;
+
+ desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc);
+ if (desc_sw) {
+ memset(desc_sw, 0, sizeof(struct fsl_desc_sw));
+ dma_async_tx_descriptor_init(&desc_sw->async_tx,
+ &fsl_chan->common);
+ desc_sw->async_tx.tx_submit = fsl_dma_tx_submit;
+ INIT_LIST_HEAD(&desc_sw->async_tx.tx_list);
+ desc_sw->async_tx.phys = pdesc;
+ }
+
+ return desc_sw;
+}
+
+
+/**
+ * fsl_dma_alloc_chan_resources - Allocate resources for DMA channel.
+ * @fsl_chan : Freescale DMA channel
+ *
+ * This function will create a dma pool for descriptor allocation.
+ *
+ * Return - The number of descriptors allocated.
+ */
+static int fsl_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
+ LIST_HEAD(tmp_list);
+
+ /* We need the descriptor to be aligned to 32bytes
+ * for meeting FSL DMA specification requirement.
+ */
+ fsl_chan->desc_pool = dma_pool_create("fsl_dma_engine_desc_pool",
+ fsl_chan->dev, sizeof(struct fsl_desc_sw),
+ 32, 0);
+ if (!fsl_chan->desc_pool) {
+ dev_err(fsl_chan->dev, "No memory for channel %d "
+ "descriptor dma pool.\n", fsl_chan->id);
+ return 0;
+ }
+
+ return 1;
+}
+
+/**
+ * fsl_dma_free_chan_resources - Free all resources of the channel.
+ * @fsl_chan : Freescale DMA channel
+ */
+static void fsl_dma_free_chan_resources(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
+ struct fsl_desc_sw *desc, *_desc;
+ unsigned long flags;
+
+ dev_dbg(fsl_chan->dev, "Free all channel resources.\n");
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+ list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) {
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(fsl_chan->dev,
+ "LD %p will be released.\n", desc);
+#endif
+ list_del(&desc->node);
+ /* free link descriptor */
+ dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+ }
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+ dma_pool_destroy(fsl_chan->desc_pool);
+}
+
+static struct dma_async_tx_descriptor *fsl_dma_prep_memcpy(
+ struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
+ size_t len, unsigned long flags)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ size_t copy;
+ LIST_HEAD(link_chain);
+
+ if (!chan)
+ return NULL;
+
+ if (!len)
+ return NULL;
+
+ fsl_chan = to_fsl_chan(chan);
+
+ do {
+
+ /* Allocate the link descriptor from DMA pool */
+ new = fsl_dma_alloc_descriptor(fsl_chan);
+ if (!new) {
+ dev_err(fsl_chan->dev,
+ "No free memory for link descriptor\n");
+ return NULL;
+ }
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+ copy = min(len, FSL_DMA_BCR_MAX_CNT);
+
+ set_desc_cnt(fsl_chan, &new->hw, copy);
+ set_desc_src(fsl_chan, &new->hw, dma_src);
+ set_desc_dest(fsl_chan, &new->hw, dma_dest);
+
+ if (!first)
+ first = new;
+ else
+ set_desc_next(fsl_chan, &prev->hw, new->async_tx.phys);
+
+ new->async_tx.cookie = 0;
+ new->async_tx.ack = 1;
+
+ prev = new;
+ len -= copy;
+ dma_src += copy;
+ dma_dest += copy;
+
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &first->async_tx.tx_list);
+ } while (len);
+
+ new->async_tx.ack = 0; /* client is in control of this ack */
+ new->async_tx.cookie = -EBUSY;
+
+ /* Set End-of-link to the last link descriptor of new list*/
+ set_ld_eol(fsl_chan, new);
+
+ return first ? &first->async_tx : NULL;
+}
+
+/**
+ * fsl_dma_update_completed_cookie - Update the completed cookie.
+ * @fsl_chan : Freescale DMA channel
+ */
+static void fsl_dma_update_completed_cookie(struct fsl_dma_chan *fsl_chan)
+{
+ struct fsl_desc_sw *cur_desc, *desc;
+ dma_addr_t ld_phy;
+
+ ld_phy = get_cdar(fsl_chan) & FSL_DMA_NLDA_MASK;
+
+ if (ld_phy) {
+ cur_desc = NULL;
+ list_for_each_entry(desc, &fsl_chan->ld_queue, node)
+ if (desc->async_tx.phys == ld_phy) {
+ cur_desc = desc;
+ break;
+ }
+
+ if (cur_desc && cur_desc->async_tx.cookie) {
+ if (dma_is_idle(fsl_chan))
+ fsl_chan->completed_cookie =
+ cur_desc->async_tx.cookie;
+ else
+ fsl_chan->completed_cookie =
+ cur_desc->async_tx.cookie - 1;
+ }
+ }
+}
+
+/**
+ * fsl_chan_ld_cleanup - Clean up link descriptors
+ * @fsl_chan : Freescale DMA channel
+ *
+ * This function clean up the ld_queue of DMA channel.
+ * If 'in_intr' is set, the function will move the link descriptor to
+ * the recycle list. Otherwise, free it directly.
+ */
+static void fsl_chan_ld_cleanup(struct fsl_dma_chan *fsl_chan)
+{
+ struct fsl_desc_sw *desc, *_desc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ fsl_dma_update_completed_cookie(fsl_chan);
+ dev_dbg(fsl_chan->dev, "chan completed_cookie = %d\n",
+ fsl_chan->completed_cookie);
+ list_for_each_entry_safe(desc, _desc, &fsl_chan->ld_queue, node) {
+ dma_async_tx_callback callback;
+ void *callback_param;
+
+ if (dma_async_is_complete(desc->async_tx.cookie,
+ fsl_chan->completed_cookie, fsl_chan->common.cookie)
+ == DMA_IN_PROGRESS)
+ break;
+
+ callback = desc->async_tx.callback;
+ callback_param = desc->async_tx.callback_param;
+
+ /* Remove from ld_queue list */
+ list_del(&desc->node);
+
+ dev_dbg(fsl_chan->dev, "link descriptor %p will be recycle.\n",
+ desc);
+ dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+
+ /* Run the link descriptor callback function */
+ if (callback) {
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+ dev_dbg(fsl_chan->dev, "link descriptor %p callback\n",
+ desc);
+ callback(callback_param);
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+ }
+ }
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+}
+
+/**
+ * fsl_chan_xfer_ld_queue - Transfer link descriptors in channel ld_queue.
+ * @fsl_chan : Freescale DMA channel
+ */
+static void fsl_chan_xfer_ld_queue(struct fsl_dma_chan *fsl_chan)
+{
+ struct list_head *ld_node;
+ dma_addr_t next_dest_addr;
+ unsigned long flags;
+
+ if (!dma_is_idle(fsl_chan))
+ return;
+
+ dma_halt(fsl_chan);
+
+ /* If there are some link descriptors
+ * not transfered in queue. We need to start it.
+ */
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ /* Find the first un-transfer desciptor */
+ for (ld_node = fsl_chan->ld_queue.next;
+ (ld_node != &fsl_chan->ld_queue)
+ && (dma_async_is_complete(
+ to_fsl_desc(ld_node)->async_tx.cookie,
+ fsl_chan->completed_cookie,
+ fsl_chan->common.cookie) == DMA_SUCCESS);
+ ld_node = ld_node->next);
+
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+
+ if (ld_node != &fsl_chan->ld_queue) {
+ /* Get the ld start address from ld_queue */
+ next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
+ dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%016llx\n",
+ (u64)next_dest_addr);
+ set_cdar(fsl_chan, next_dest_addr);
+ dma_start(fsl_chan);
+ } else {
+ set_cdar(fsl_chan, 0);
+ set_ndar(fsl_chan, 0);
+ }
+}
+
+/**
+ * fsl_dma_memcpy_issue_pending - Issue the DMA start command
+ * @fsl_chan : Freescale DMA channel
+ */
+static void fsl_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
+
+#ifdef FSL_DMA_LD_DEBUG
+ struct fsl_desc_sw *ld;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+ if (list_empty(&fsl_chan->ld_queue)) {
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+ return;
+ }
+
+ dev_dbg(fsl_chan->dev, "--memcpy issue--\n");
+ list_for_each_entry(ld, &fsl_chan->ld_queue, node) {
+ int i;
+ dev_dbg(fsl_chan->dev, "Ch %d, LD %08x\n",
+ fsl_chan->id, ld->async_tx.phys);
+ for (i = 0; i < 8; i++)
+ dev_dbg(fsl_chan->dev, "LD offset %d: %08x\n",
+ i, *(((u32 *)&ld->hw) + i));
+ }
+ dev_dbg(fsl_chan->dev, "----------------\n");
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+#endif
+
+ fsl_chan_xfer_ld_queue(fsl_chan);
+}
+
+static void fsl_dma_dependency_added(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
+
+ fsl_chan_ld_cleanup(fsl_chan);
+}
+
+/**
+ * fsl_dma_is_complete - Determine the DMA status
+ * @fsl_chan : Freescale DMA channel
+ */
+static enum dma_status fsl_dma_is_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done,
+ dma_cookie_t *used)
+{
+ struct fsl_dma_chan *fsl_chan = to_fsl_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+
+ fsl_chan_ld_cleanup(fsl_chan);
+
+ last_used = chan->cookie;
+ last_complete = fsl_chan->completed_cookie;
+
+ if (done)
+ *done = last_complete;
+
+ if (used)
+ *used = last_used;
+
+ return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+static irqreturn_t fsl_dma_chan_do_interrupt(int irq, void *data)
+{
+ struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
+ dma_addr_t stat;
+
+ stat = get_sr(fsl_chan);
+ dev_dbg(fsl_chan->dev, "event: channel %d, stat = 0x%x\n",
+ fsl_chan->id, stat);
+ set_sr(fsl_chan, stat); /* Clear the event register */
+
+ stat &= ~(FSL_DMA_SR_CB | FSL_DMA_SR_CH);
+ if (!stat)
+ return IRQ_NONE;
+
+ if (stat & FSL_DMA_SR_TE)
+ dev_err(fsl_chan->dev, "Transfer Error!\n");
+
+ /* If the link descriptor segment transfer finishes,
+ * we will recycle the used descriptor.
+ */
+ if (stat & FSL_DMA_SR_EOSI) {
+ dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
+ dev_dbg(fsl_chan->dev, "event: clndar 0x%016llx, "
+ "nlndar 0x%016llx\n", (u64)get_cdar(fsl_chan),
+ (u64)get_ndar(fsl_chan));
+ stat &= ~FSL_DMA_SR_EOSI;
+ }
+
+ /* If it current transfer is the end-of-transfer,
+ * we should clear the Channel Start bit for
+ * prepare next transfer.
+ */
+ if (stat & (FSL_DMA_SR_EOLNI | FSL_DMA_SR_EOCDI)) {
+ dev_dbg(fsl_chan->dev, "event: End-of-link INT\n");
+ stat &= ~FSL_DMA_SR_EOLNI;
+ fsl_chan_xfer_ld_queue(fsl_chan);
+ }
+
+ if (stat)
+ dev_dbg(fsl_chan->dev, "event: unhandled sr 0x%02x\n",
+ stat);
+
+ dev_dbg(fsl_chan->dev, "event: Exit\n");
+ tasklet_schedule(&fsl_chan->tasklet);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fsl_dma_do_interrupt(int irq, void *data)
+{
+ struct fsl_dma_device *fdev = (struct fsl_dma_device *)data;
+ u32 gsr;
+ int ch_nr;
+
+ gsr = (fdev->feature & FSL_DMA_BIG_ENDIAN) ? in_be32(fdev->reg_base)
+ : in_le32(fdev->reg_base);
+ ch_nr = (32 - ffs(gsr)) / 8;
+
+ return fdev->chan[ch_nr] ? fsl_dma_chan_do_interrupt(irq,
+ fdev->chan[ch_nr]) : IRQ_NONE;
+}
+
+static void dma_do_tasklet(unsigned long data)
+{
+ struct fsl_dma_chan *fsl_chan = (struct fsl_dma_chan *)data;
+ fsl_chan_ld_cleanup(fsl_chan);
+}
+
+static void fsl_dma_callback_test(struct fsl_dma_chan *fsl_chan)
+{
+ if (fsl_chan)
+ dev_info(fsl_chan->dev, "selftest: callback is ok!\n");
+}
+
+static int fsl_dma_self_test(struct fsl_dma_chan *fsl_chan)
+{
+ struct dma_chan *chan;
+ int err = 0;
+ dma_addr_t dma_dest, dma_src;
+ dma_cookie_t cookie;
+ u8 *src, *dest;
+ int i;
+ size_t test_size;
+ struct dma_async_tx_descriptor *tx1, *tx2, *tx3;
+
+ test_size = 4096;
+
+ src = kmalloc(test_size * 2, GFP_KERNEL);
+ if (!src) {
+ dev_err(fsl_chan->dev,
+ "selftest: Cannot alloc memory for test!\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ dest = src + test_size;
+
+ for (i = 0; i < test_size; i++)
+ src[i] = (u8) i;
+
+ chan = &fsl_chan->common;
+
+ if (fsl_dma_alloc_chan_resources(chan) < 1) {
+ dev_err(fsl_chan->dev,
+ "selftest: Cannot alloc resources for DMA\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* TX 1 */
+ dma_src = dma_map_single(fsl_chan->dev, src, test_size / 2,
+ DMA_TO_DEVICE);
+ dma_dest = dma_map_single(fsl_chan->dev, dest, test_size / 2,
+ DMA_FROM_DEVICE);
+ tx1 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 2, 0);
+ async_tx_ack(tx1);
+
+ cookie = fsl_dma_tx_submit(tx1);
+ fsl_dma_memcpy_issue_pending(chan);
+ msleep(2);
+
+ if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(fsl_chan->dev, "selftest: Time out!\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* Test free and re-alloc channel resources */
+ fsl_dma_free_chan_resources(chan);
+
+ if (fsl_dma_alloc_chan_resources(chan) < 1) {
+ dev_err(fsl_chan->dev,
+ "selftest: Cannot alloc resources for DMA\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* Continue to test
+ * TX 2
+ */
+ dma_src = dma_map_single(fsl_chan->dev, src + test_size / 2,
+ test_size / 4, DMA_TO_DEVICE);
+ dma_dest = dma_map_single(fsl_chan->dev, dest + test_size / 2,
+ test_size / 4, DMA_FROM_DEVICE);
+ tx2 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0);
+ async_tx_ack(tx2);
+
+ /* TX 3 */
+ dma_src = dma_map_single(fsl_chan->dev, src + test_size * 3 / 4,
+ test_size / 4, DMA_TO_DEVICE);
+ dma_dest = dma_map_single(fsl_chan->dev, dest + test_size * 3 / 4,
+ test_size / 4, DMA_FROM_DEVICE);
+ tx3 = fsl_dma_prep_memcpy(chan, dma_dest, dma_src, test_size / 4, 0);
+ async_tx_ack(tx3);
+
+ /* Test exchanging the prepared tx sort */
+ cookie = fsl_dma_tx_submit(tx3);
+ cookie = fsl_dma_tx_submit(tx2);
+
+#ifdef FSL_DMA_CALLBACKTEST
+ if (dma_has_cap(DMA_INTERRUPT, ((struct fsl_dma_device *)
+ dev_get_drvdata(fsl_chan->dev->parent))->common.cap_mask)) {
+ tx3->callback = fsl_dma_callback_test;
+ tx3->callback_param = fsl_chan;
+ }
+#endif
+ fsl_dma_memcpy_issue_pending(chan);
+ msleep(2);
+
+ if (fsl_dma_is_complete(chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(fsl_chan->dev, "selftest: Time out!\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ err = memcmp(src, dest, test_size);
+ if (err) {
+ for (i = 0; (*(src + i) == *(dest + i)) && (i < test_size);
+ i++);
+ dev_err(fsl_chan->dev, "selftest: Test failed, data %d/%d is "
+ "error! src 0x%x, dest 0x%x\n",
+ i, test_size, *(src + i), *(dest + i));
+ }
+
+free_resources:
+ fsl_dma_free_chan_resources(chan);
+out:
+ kfree(src);
+ return err;
+}
+
+static int __devinit of_fsl_dma_chan_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ struct fsl_dma_device *fdev;
+ struct fsl_dma_chan *new_fsl_chan;
+ int err;
+
+ fdev = dev_get_drvdata(dev->dev.parent);
+ BUG_ON(!fdev);
+
+ /* alloc channel */
+ new_fsl_chan = kzalloc(sizeof(struct fsl_dma_chan), GFP_KERNEL);
+ if (!new_fsl_chan) {
+ dev_err(&dev->dev, "No free memory for allocating "
+ "dma channels!\n");
+ err = -ENOMEM;
+ goto err;
+ }
+
+ /* get dma channel register base */
+ err = of_address_to_resource(dev->node, 0, &new_fsl_chan->reg);
+ if (err) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ dev->node->full_name);
+ goto err;
+ }
+
+ new_fsl_chan->feature = *(u32 *)match->data;
+
+ if (!fdev->feature)
+ fdev->feature = new_fsl_chan->feature;
+
+ /* If the DMA device's feature is different than its channels',
+ * report the bug.
+ */
+ WARN_ON(fdev->feature != new_fsl_chan->feature);
+
+ new_fsl_chan->dev = &dev->dev;
+ new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start,
+ new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
+
+ new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
+ if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ dev_err(&dev->dev, "There is no %d channel!\n",
+ new_fsl_chan->id);
+ err = -EINVAL;
+ goto err;
+ }
+ fdev->chan[new_fsl_chan->id] = new_fsl_chan;
+ tasklet_init(&new_fsl_chan->tasklet, dma_do_tasklet,
+ (unsigned long)new_fsl_chan);
+
+ /* Init the channel */
+ dma_init(new_fsl_chan);
+
+ /* Clear cdar registers */
+ set_cdar(new_fsl_chan, 0);
+
+ switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
+ case FSL_DMA_IP_85XX:
+ new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
+ new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
+ case FSL_DMA_IP_83XX:
+ new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
+ new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
+ }
+
+ spin_lock_init(&new_fsl_chan->desc_lock);
+ INIT_LIST_HEAD(&new_fsl_chan->ld_queue);
+
+ new_fsl_chan->common.device = &fdev->common;
+
+ /* Add the channel to DMA device channel list */
+ list_add_tail(&new_fsl_chan->common.device_node,
+ &fdev->common.channels);
+ fdev->common.chancnt++;
+
+ new_fsl_chan->irq = irq_of_parse_and_map(dev->node, 0);
+ if (new_fsl_chan->irq != NO_IRQ) {
+ err = request_irq(new_fsl_chan->irq,
+ &fsl_dma_chan_do_interrupt, IRQF_SHARED,
+ "fsldma-channel", new_fsl_chan);
+ if (err) {
+ dev_err(&dev->dev, "DMA channel %s request_irq error "
+ "with return %d\n", dev->node->full_name, err);
+ goto err;
+ }
+ }
+
+#ifdef CONFIG_FSL_DMA_SELFTEST
+ err = fsl_dma_self_test(new_fsl_chan);
+ if (err)
+ goto err;
+#endif
+
+ dev_info(&dev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id,
+ match->compatible, new_fsl_chan->irq);
+
+ return 0;
+err:
+ dma_halt(new_fsl_chan);
+ iounmap(new_fsl_chan->reg_base);
+ free_irq(new_fsl_chan->irq, new_fsl_chan);
+ list_del(&new_fsl_chan->common.device_node);
+ kfree(new_fsl_chan);
+ return err;
+}
+
+const u32 mpc8540_dma_ip_feature = FSL_DMA_IP_85XX | FSL_DMA_BIG_ENDIAN;
+const u32 mpc8349_dma_ip_feature = FSL_DMA_IP_83XX | FSL_DMA_LITTLE_ENDIAN;
+
+static struct of_device_id of_fsl_dma_chan_ids[] = {
+ {
+ .compatible = "fsl,mpc8540-dma-channel",
+ .data = (void *)&mpc8540_dma_ip_feature,
+ },
+ {
+ .compatible = "fsl,mpc8349-dma-channel",
+ .data = (void *)&mpc8349_dma_ip_feature,
+ },
+ {}
+};
+
+static struct of_platform_driver of_fsl_dma_chan_driver = {
+ .name = "of-fsl-dma-channel",
+ .match_table = of_fsl_dma_chan_ids,
+ .probe = of_fsl_dma_chan_probe,
+};
+
+static __init int of_fsl_dma_chan_init(void)
+{
+ return of_register_platform_driver(&of_fsl_dma_chan_driver);
+}
+
+static int __devinit of_fsl_dma_probe(struct of_device *dev,
+ const struct of_device_id *match)
+{
+ int err;
+ unsigned int irq;
+ struct fsl_dma_device *fdev;
+
+ fdev = kzalloc(sizeof(struct fsl_dma_device), GFP_KERNEL);
+ if (!fdev) {
+ dev_err(&dev->dev, "No enough memory for 'priv'\n");
+ err = -ENOMEM;
+ goto err;
+ }
+ fdev->dev = &dev->dev;
+ INIT_LIST_HEAD(&fdev->common.channels);
+
+ /* get DMA controller register base */
+ err = of_address_to_resource(dev->node, 0, &fdev->reg);
+ if (err) {
+ dev_err(&dev->dev, "Can't get %s property 'reg'\n",
+ dev->node->full_name);
+ goto err;
+ }
+
+ dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
+ "controller at 0x%08x...\n",
+ match->compatible, fdev->reg.start);
+ fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
+ - fdev->reg.start + 1);
+
+ dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
+ dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+ fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
+ fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
+ fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
+ fdev->common.device_is_tx_complete = fsl_dma_is_complete;
+ fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
+ fdev->common.device_dependency_added = fsl_dma_dependency_added;
+ fdev->common.dev = &dev->dev;
+
+ irq = irq_of_parse_and_map(dev->node, 0);
+ if (irq != NO_IRQ) {
+ err = request_irq(irq, &fsl_dma_do_interrupt, IRQF_SHARED,
+ "fsldma-device", fdev);
+ if (err) {
+ dev_err(&dev->dev, "DMA device request_irq error "
+ "with return %d\n", err);
+ goto err;
+ }
+ }
+
+ dev_set_drvdata(&(dev->dev), fdev);
+ of_platform_bus_probe(dev->node, of_fsl_dma_chan_ids, &dev->dev);
+
+ dma_async_device_register(&fdev->common);
+ return 0;
+
+err:
+ iounmap(fdev->reg_base);
+ kfree(fdev);
+ return err;
+}
+
+static struct of_device_id of_fsl_dma_ids[] = {
+ { .compatible = "fsl,mpc8540-dma", },
+ { .compatible = "fsl,mpc8349-dma", },
+ {}
+};
+
+static struct of_platform_driver of_fsl_dma_driver = {
+ .name = "of-fsl-dma",
+ .match_table = of_fsl_dma_ids,
+ .probe = of_fsl_dma_probe,
+};
+
+static __init int of_fsl_dma_init(void)
+{
+ return of_register_platform_driver(&of_fsl_dma_driver);
+}
+
+subsys_initcall(of_fsl_dma_chan_init);
+subsys_initcall(of_fsl_dma_init);
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author:
+ * Zhang Wei <wei.zhang@freescale.com>, Jul 2007
+ * Ebony Zhu <ebony.zhu@freescale.com>, May 2007
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __DMA_FSLDMA_H
+#define __DMA_FSLDMA_H
+
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dmaengine.h>
+
+/* Define data structures needed by Freescale
+ * MPC8540 and MPC8349 DMA controller.
+ */
+#define FSL_DMA_MR_CS 0x00000001
+#define FSL_DMA_MR_CC 0x00000002
+#define FSL_DMA_MR_CA 0x00000008
+#define FSL_DMA_MR_EIE 0x00000040
+#define FSL_DMA_MR_XFE 0x00000020
+#define FSL_DMA_MR_EOLNIE 0x00000100
+#define FSL_DMA_MR_EOLSIE 0x00000080
+#define FSL_DMA_MR_EOSIE 0x00000200
+#define FSL_DMA_MR_CDSM 0x00000010
+#define FSL_DMA_MR_CTM 0x00000004
+#define FSL_DMA_MR_EMP_EN 0x00200000
+#define FSL_DMA_MR_EMS_EN 0x00040000
+#define FSL_DMA_MR_DAHE 0x00002000
+#define FSL_DMA_MR_SAHE 0x00001000
+
+/* Special MR definition for MPC8349 */
+#define FSL_DMA_MR_EOTIE 0x00000080
+
+#define FSL_DMA_SR_CH 0x00000020
+#define FSL_DMA_SR_CB 0x00000004
+#define FSL_DMA_SR_TE 0x00000080
+#define FSL_DMA_SR_EOSI 0x00000002
+#define FSL_DMA_SR_EOLSI 0x00000001
+#define FSL_DMA_SR_EOCDI 0x00000001
+#define FSL_DMA_SR_EOLNI 0x00000008
+
+#define FSL_DMA_SATR_SBPATMU 0x20000000
+#define FSL_DMA_SATR_STRANSINT_RIO 0x00c00000
+#define FSL_DMA_SATR_SREADTYPE_SNOOP_READ 0x00050000
+#define FSL_DMA_SATR_SREADTYPE_BP_IORH 0x00020000
+#define FSL_DMA_SATR_SREADTYPE_BP_NREAD 0x00040000
+#define FSL_DMA_SATR_SREADTYPE_BP_MREAD 0x00070000
+
+#define FSL_DMA_DATR_DBPATMU 0x20000000
+#define FSL_DMA_DATR_DTRANSINT_RIO 0x00c00000
+#define FSL_DMA_DATR_DWRITETYPE_SNOOP_WRITE 0x00050000
+#define FSL_DMA_DATR_DWRITETYPE_BP_FLUSH 0x00010000
+
+#define FSL_DMA_EOL ((u64)0x1)
+#define FSL_DMA_SNEN ((u64)0x10)
+#define FSL_DMA_EOSIE 0x8
+#define FSL_DMA_NLDA_MASK (~(u64)0x1f)
+
+#define FSL_DMA_BCR_MAX_CNT 0x03ffffffu
+
+#define FSL_DMA_DGSR_TE 0x80
+#define FSL_DMA_DGSR_CH 0x20
+#define FSL_DMA_DGSR_PE 0x10
+#define FSL_DMA_DGSR_EOLNI 0x08
+#define FSL_DMA_DGSR_CB 0x04
+#define FSL_DMA_DGSR_EOSI 0x02
+#define FSL_DMA_DGSR_EOLSI 0x01
+
+struct fsl_dma_ld_hw {
+ u64 __bitwise src_addr;
+ u64 __bitwise dst_addr;
+ u64 __bitwise next_ln_addr;
+ u32 __bitwise count;
+ u32 __bitwise reserve;
+} __attribute__((aligned(32)));
+
+struct fsl_desc_sw {
+ struct fsl_dma_ld_hw hw;
+ struct list_head node;
+ struct dma_async_tx_descriptor async_tx;
+ struct list_head *ld;
+ void *priv;
+} __attribute__((aligned(32)));
+
+struct fsl_dma_chan_regs {
+ u32 __bitwise mr; /* 0x00 - Mode Register */
+ u32 __bitwise sr; /* 0x04 - Status Register */
+ u64 __bitwise cdar; /* 0x08 - Current descriptor address register */
+ u64 __bitwise sar; /* 0x10 - Source Address Register */
+ u64 __bitwise dar; /* 0x18 - Destination Address Register */
+ u32 __bitwise bcr; /* 0x20 - Byte Count Register */
+ u64 __bitwise ndar; /* 0x24 - Next Descriptor Address Register */
+};
+
+struct fsl_dma_chan;
+#define FSL_DMA_MAX_CHANS_PER_DEVICE 4
+
+struct fsl_dma_device {
+ void __iomem *reg_base; /* DGSR register base */
+ struct resource reg; /* Resource for register */
+ struct device *dev;
+ struct dma_device common;
+ struct fsl_dma_chan *chan[FSL_DMA_MAX_CHANS_PER_DEVICE];
+ u32 feature; /* The same as DMA channels */
+};
+
+/* Define macros for fsl_dma_chan->feature property */
+#define FSL_DMA_LITTLE_ENDIAN 0x00000000
+#define FSL_DMA_BIG_ENDIAN 0x00000001
+
+#define FSL_DMA_IP_MASK 0x00000ff0
+#define FSL_DMA_IP_85XX 0x00000010
+#define FSL_DMA_IP_83XX 0x00000020
+
+#define FSL_DMA_CHAN_PAUSE_EXT 0x00001000
+#define FSL_DMA_CHAN_START_EXT 0x00002000
+
+struct fsl_dma_chan {
+ struct fsl_dma_chan_regs __iomem *reg_base;
+ dma_cookie_t completed_cookie; /* The maximum cookie completed */
+ spinlock_t desc_lock; /* Descriptor operation lock */
+ struct list_head ld_queue; /* Link descriptors queue */
+ struct dma_chan common; /* DMA common channel */
+ struct dma_pool *desc_pool; /* Descriptors pool */
+ struct device *dev; /* Channel device */
+ struct resource reg; /* Resource for register */
+ int irq; /* Channel IRQ */
+ int id; /* Raw id of this channel */
+ struct tasklet_struct tasklet;
+ u32 feature;
+
+ void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*toggle_ext_start)(struct fsl_dma_chan *fsl_chan, int enable);
+ void (*set_src_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*set_dest_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
+};
+
+#define to_fsl_chan(chan) container_of(chan, struct fsl_dma_chan, common)
+#define to_fsl_desc(lh) container_of(lh, struct fsl_desc_sw, node)
+#define tx_to_fsl_desc(tx) container_of(tx, struct fsl_desc_sw, async_tx)
+
+#ifndef __powerpc64__
+static u64 in_be64(const u64 __iomem *addr)
+{
+ return ((u64)in_be32((u32 *)addr) << 32) | (in_be32((u32 *)addr + 1));
+}
+
+static void out_be64(u64 __iomem *addr, u64 val)
+{
+ out_be32((u32 *)addr, val >> 32);
+ out_be32((u32 *)addr + 1, (u32)val);
+}
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static u64 in_le64(const u64 __iomem *addr)
+{
+ return ((u64)in_le32((u32 *)addr + 1) << 32) | (in_le32((u32 *)addr));
+}
+
+static void out_le64(u64 __iomem *addr, u64 val)
+{
+ out_le32((u32 *)addr + 1, val >> 32);
+ out_le32((u32 *)addr, (u32)val);
+}
+#endif
+
+#define DMA_IN(fsl_chan, addr, width) \
+ (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ in_be##width(addr) : in_le##width(addr))
+#define DMA_OUT(fsl_chan, addr, val, width) \
+ (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ out_be##width(addr, val) : out_le##width(addr, val))
+
+#define DMA_TO_CPU(fsl_chan, d, width) \
+ (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ be##width##_to_cpu(d) : le##width##_to_cpu(d))
+#define CPU_TO_DMA(fsl_chan, c, width) \
+ (((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
+ cpu_to_be##width(c) : cpu_to_le##width(c))
+
+#endif /* __DMA_FSLDMA_H */
new->len = len;
new->dst = dma_dest;
new->src = dma_src;
+ new->async_tx.ack = 0;
return &new->async_tx;
} else
return NULL;
new->len = len;
new->dst = dma_dest;
new->src = dma_src;
+ new->async_tx.ack = 0;
return &new->async_tx;
} else
return NULL;
config INPUT_APANEL
tristate "Fujitsu Lifebook Application Panel buttons"
- depends on X86
- select I2C_I801
+ depends on X86 && I2C && LEDS_CLASS
select INPUT_POLLDEV
select CHECK_SIGNATURE
help
Say Y here for support of the Application Panel buttons, used on
Fujitsu Lifebook. These are attached to the mainboard through
- an SMBus interface managed by the I2C Intel ICH (i801) driver.
+ an SMBus interface managed by the I2C Intel ICH (i801) driver,
+ which you should also build for this kernel.
To compile this driver as a module, choose M here: the module will
be called apanel.
if (!request_region(adapter->io, 32, "fcpcipnp"))
goto err;
- switch (adapter->type) {
- case AVM_FRITZ_PCIV2:
- retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED,
- "fcpcipnp", adapter);
- break;
- case AVM_FRITZ_PCI:
- retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED,
- "fcpcipnp", adapter);
- break;
- case AVM_FRITZ_PNP:
- retval = request_irq(adapter->irq, fcpci_irq, 0,
- "fcpcipnp", adapter);
- break;
- }
- if (retval)
- goto err_region;
-
switch (adapter->type) {
case AVM_FRITZ_PCIV2:
case AVM_FRITZ_PCI:
outb(0, adapter->io + AVM_STATUS0);
mdelay(10);
+ switch (adapter->type) {
+ case AVM_FRITZ_PCIV2:
+ retval = request_irq(adapter->irq, fcpci2_irq, IRQF_SHARED,
+ "fcpcipnp", adapter);
+ break;
+ case AVM_FRITZ_PCI:
+ retval = request_irq(adapter->irq, fcpci_irq, IRQF_SHARED,
+ "fcpcipnp", adapter);
+ break;
+ case AVM_FRITZ_PNP:
+ retval = request_irq(adapter->irq, fcpci_irq, 0,
+ "fcpcipnp", adapter);
+ break;
+ }
+ if (retval)
+ goto err_region;
+
switch (adapter->type) {
case AVM_FRITZ_PCIV2:
fcpci2_init(adapter);
sprintf(rs, "\r\n0-2");
isdn_tty_at_cout(rs, info);
} else {
- if ((f->phase != ISDN_FAX_PHASE_D) || (!info->faxonline & 1))
+ if ((f->phase != ISDN_FAX_PHASE_D) ||
+ (!(info->faxonline & 1)))
PARSE_ERROR1;
par = isdn_getnum(p);
if ((par < 0) || (par > 2))
}
break;
case ISDN_CMD_CLREAZ:
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
if (card->leased)
break;
}
break;
case ISDN_CMD_SETL3:
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
return 0;
default:
isdnloop_card *card = isdnloop_findcard(id);
if (card) {
- if (!card->flags & ISDNLOOP_FLAGS_RUNNING)
+ if (!(card->flags & ISDNLOOP_FLAGS_RUNNING))
return -ENODEV;
return (isdnloop_writecmd(buf, len, 1, card));
}
if (time_before(jiffies, bitmap->daemon_lastrun + bitmap->daemon_sleep*HZ))
return;
bitmap->daemon_lastrun = jiffies;
+ if (bitmap->allclean) {
+ bitmap->mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
+ return;
+ }
+ bitmap->allclean = 1;
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
clear_page_attr(bitmap, page, BITMAP_PAGE_NEEDWRITE);
spin_unlock_irqrestore(&bitmap->lock, flags);
- if (need_write)
+ if (need_write) {
write_page(bitmap, page, 0);
+ bitmap->allclean = 0;
+ }
continue;
}
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
*/
+ if (*bmc)
+ bitmap->allclean = 0;
+
if (*bmc == 2) {
*bmc=1; /* maybe clear the bit next time */
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
}
+ if (bitmap->allclean == 0)
+ bitmap->mddev->thread->timeout = bitmap->daemon_sleep * HZ;
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
sectors -= blocks;
else sectors = 0;
}
+ bitmap->allclean = 0;
return 0;
}
}
}
spin_unlock_irq(&bitmap->lock);
+ bitmap->allclean = 0;
return rv;
}
}
unlock:
spin_unlock_irqrestore(&bitmap->lock, flags);
+ bitmap->allclean = 0;
}
void bitmap_close_sync(struct bitmap *bitmap)
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
spin_unlock_irq(&bitmap->lock);
-
+ bitmap->allclean = 0;
}
/* dirty the memory and file bits for bitmap chunks "s" to "e" */
rdev->sb_size = le32_to_cpu(sb->max_dev) * 2 + 256;
bmask = queue_hardsect_size(rdev->bdev->bd_disk->queue)-1;
if (rdev->sb_size & bmask)
- rdev-> sb_size = (rdev->sb_size | bmask)+1;
+ rdev->sb_size = (rdev->sb_size | bmask) + 1;
+
+ if (minor_version
+ && rdev->data_offset < sb_offset + (rdev->sb_size/512))
+ return -EINVAL;
if (sb->level == cpu_to_le32(LEVEL_MULTIPATH))
rdev->desc_nr = -1;
else
ret = 0;
}
- if (minor_version)
+ if (minor_version)
rdev->size = ((rdev->bdev->bd_inode->i_size>>9) - le64_to_cpu(sb->data_offset)) / 2;
else
rdev->size = rdev->sb_offset;
free_disk_sb(rdev);
list_del_init(&rdev->same_set);
#ifndef MODULE
- md_autodetect_dev(rdev->bdev->bd_dev);
+ if (test_bit(AutoDetected, &rdev->flags))
+ md_autodetect_dev(rdev->bdev->bd_dev);
#endif
unlock_rdev(rdev);
kobject_put(&rdev->kobj);
char *e;
unsigned long long size = simple_strtoull(buf, &e, 10);
unsigned long long oldsize = rdev->size;
+ mddev_t *my_mddev = rdev->mddev;
+
if (e==buf || (*e && *e != '\n'))
return -EINVAL;
- if (rdev->mddev->pers)
+ if (my_mddev->pers)
return -EBUSY;
rdev->size = size;
if (size > oldsize && rdev->mddev->external) {
int overlap = 0;
struct list_head *tmp, *tmp2;
- mddev_unlock(rdev->mddev);
+ mddev_unlock(my_mddev);
for_each_mddev(mddev, tmp) {
mdk_rdev_t *rdev2;
break;
}
}
- mddev_lock(rdev->mddev);
+ mddev_lock(my_mddev);
if (overlap) {
/* Someone else could have slipped in a size
* change here, but doing so is just silly.
return -EBUSY;
}
}
- if (size < rdev->mddev->size || rdev->mddev->size == 0)
- rdev->mddev->size = size;
+ if (size < my_mddev->size || my_mddev->size == 0)
+ my_mddev->size = size;
return len;
}
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
+ mddev_t *mddev = rdev->mddev;
+ ssize_t rv;
if (!entry->show)
return -EIO;
- return entry->show(rdev, page);
+
+ rv = mddev ? mddev_lock(mddev) : -EBUSY;
+ if (!rv) {
+ if (rdev->mddev == NULL)
+ rv = -EBUSY;
+ else
+ rv = entry->show(rdev, page);
+ mddev_unlock(mddev);
+ }
+ return rv;
}
static ssize_t
{
struct rdev_sysfs_entry *entry = container_of(attr, struct rdev_sysfs_entry, attr);
mdk_rdev_t *rdev = container_of(kobj, mdk_rdev_t, kobj);
- int rv;
+ ssize_t rv;
+ mddev_t *mddev = rdev->mddev;
if (!entry->store)
return -EIO;
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
- rv = mddev_lock(rdev->mddev);
+ rv = mddev ? mddev_lock(mddev): -EBUSY;
if (!rv) {
- rv = entry->store(rdev, page, length);
+ if (rdev->mddev == NULL)
+ rv = -EBUSY;
+ else
+ rv = entry->store(rdev, page, length);
mddev_unlock(rdev->mddev);
}
return rv;
mddev->ro = 0;
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
+ md_wakeup_thread(mddev->sync_thread);
}
atomic_inc(&mddev->writes_pending);
if (mddev->in_sync) {
MD_BUG();
continue;
}
+ set_bit(AutoDetected, &rdev->flags);
list_add(&rdev->same_set, &pending_raid_disks);
i_passed++;
}
}
+static int flush_pending_writes(conf_t *conf)
+{
+ /* Any writes that have been queued but are awaiting
+ * bitmap updates get flushed here.
+ * We return 1 if any requests were actually submitted.
+ */
+ int rv = 0;
+
+ spin_lock_irq(&conf->device_lock);
+
+ if (conf->pending_bio_list.head) {
+ struct bio *bio;
+ bio = bio_list_get(&conf->pending_bio_list);
+ blk_remove_plug(conf->mddev->queue);
+ spin_unlock_irq(&conf->device_lock);
+ /* flush any pending bitmap writes to
+ * disk before proceeding w/ I/O */
+ bitmap_unplug(conf->mddev->bitmap);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ rv = 1;
+ } else
+ spin_unlock_irq(&conf->device_lock);
+ return rv;
+}
+
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
/* stop syncio and normal IO and wait for everything to
* go quite.
* We increment barrier and nr_waiting, and then
- * wait until barrier+nr_pending match nr_queued+2
+ * wait until nr_pending match nr_queued+1
+ * This is called in the context of one normal IO request
+ * that has failed. Thus any sync request that might be pending
+ * will be blocked by nr_pending, and we need to wait for
+ * pending IO requests to complete or be queued for re-try.
+ * Thus the number queued (nr_queued) plus this request (1)
+ * must match the number of pending IOs (nr_pending) before
+ * we continue.
*/
spin_lock_irq(&conf->resync_lock);
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq(conf->wait_barrier,
- conf->barrier+conf->nr_pending == conf->nr_queued+2,
+ conf->nr_pending == conf->nr_queued+1,
conf->resync_lock,
- raid1_unplug(conf->mddev->queue));
+ ({ flush_pending_writes(conf);
+ raid1_unplug(conf->mddev->queue); }));
spin_unlock_irq(&conf->resync_lock);
}
static void unfreeze_array(conf_t *conf)
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ /* In case raid1d snuck into freeze_array */
+ wake_up(&conf->wait_barrier);
+
if (do_sync)
md_wakeup_thread(mddev->thread);
#if 0
for (;;) {
char b[BDEVNAME_SIZE];
- spin_lock_irqsave(&conf->device_lock, flags);
-
- if (conf->pending_bio_list.head) {
- bio = bio_list_get(&conf->pending_bio_list);
- blk_remove_plug(mddev->queue);
- spin_unlock_irqrestore(&conf->device_lock, flags);
- /* flush any pending bitmap writes to disk before proceeding w/ I/O */
- bitmap_unplug(mddev->bitmap);
- while (bio) { /* submit pending writes */
- struct bio *next = bio->bi_next;
- bio->bi_next = NULL;
- generic_make_request(bio);
- bio = next;
- }
- unplug = 1;
+ unplug += flush_pending_writes(conf);
- continue;
- }
-
- if (list_empty(head))
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(&conf->device_lock, flags);
break;
+ }
r1_bio = list_entry(head->prev, r1bio_t, retry_list);
list_del(head->prev);
conf->nr_queued--;
}
}
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
if (unplug)
unplug_slaves(mddev);
}
current_distance = abs(r10_bio->devs[slot].addr -
conf->mirrors[disk].head_position);
- /* Find the disk whose head is closest */
+ /* Find the disk whose head is closest,
+ * or - for far > 1 - find the closest to partition beginning */
for (nslot = slot; nslot < conf->copies; nslot++) {
int ndisk = r10_bio->devs[nslot].devnum;
slot = nslot;
break;
}
- new_distance = abs(r10_bio->devs[nslot].addr -
- conf->mirrors[ndisk].head_position);
+
+ /* for far > 1 always use the lowest address */
+ if (conf->far_copies > 1)
+ new_distance = r10_bio->devs[nslot].addr;
+ else
+ new_distance = abs(r10_bio->devs[nslot].addr -
+ conf->mirrors[ndisk].head_position);
if (new_distance < current_distance) {
current_distance = new_distance;
disk = ndisk;
return ret;
}
-
+static int flush_pending_writes(conf_t *conf)
+{
+ /* Any writes that have been queued but are awaiting
+ * bitmap updates get flushed here.
+ * We return 1 if any requests were actually submitted.
+ */
+ int rv = 0;
+
+ spin_lock_irq(&conf->device_lock);
+
+ if (conf->pending_bio_list.head) {
+ struct bio *bio;
+ bio = bio_list_get(&conf->pending_bio_list);
+ blk_remove_plug(conf->mddev->queue);
+ spin_unlock_irq(&conf->device_lock);
+ /* flush any pending bitmap writes to disk
+ * before proceeding w/ I/O */
+ bitmap_unplug(conf->mddev->bitmap);
+
+ while (bio) { /* submit pending writes */
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ generic_make_request(bio);
+ bio = next;
+ }
+ rv = 1;
+ } else
+ spin_unlock_irq(&conf->device_lock);
+ return rv;
+}
/* Barriers....
* Sometimes we need to suspend IO while we do something else,
* either some resync/recovery, or reconfigure the array.
/* stop syncio and normal IO and wait for everything to
* go quiet.
* We increment barrier and nr_waiting, and then
- * wait until barrier+nr_pending match nr_queued+2
+ * wait until nr_pending match nr_queued+1
+ * This is called in the context of one normal IO request
+ * that has failed. Thus any sync request that might be pending
+ * will be blocked by nr_pending, and we need to wait for
+ * pending IO requests to complete or be queued for re-try.
+ * Thus the number queued (nr_queued) plus this request (1)
+ * must match the number of pending IOs (nr_pending) before
+ * we continue.
*/
spin_lock_irq(&conf->resync_lock);
conf->barrier++;
conf->nr_waiting++;
wait_event_lock_irq(conf->wait_barrier,
- conf->barrier+conf->nr_pending == conf->nr_queued+2,
+ conf->nr_pending == conf->nr_queued+1,
conf->resync_lock,
- raid10_unplug(conf->mddev->queue));
+ ({ flush_pending_writes(conf);
+ raid10_unplug(conf->mddev->queue); }));
spin_unlock_irq(&conf->resync_lock);
}
blk_plug_device(mddev->queue);
spin_unlock_irqrestore(&conf->device_lock, flags);
+ /* In case raid10d snuck in to freeze_array */
+ wake_up(&conf->wait_barrier);
+
if (do_sync)
md_wakeup_thread(mddev->thread);
for (;;) {
char b[BDEVNAME_SIZE];
- spin_lock_irqsave(&conf->device_lock, flags);
- if (conf->pending_bio_list.head) {
- bio = bio_list_get(&conf->pending_bio_list);
- blk_remove_plug(mddev->queue);
- spin_unlock_irqrestore(&conf->device_lock, flags);
- /* flush any pending bitmap writes to disk before proceeding w/ I/O */
- bitmap_unplug(mddev->bitmap);
-
- while (bio) { /* submit pending writes */
- struct bio *next = bio->bi_next;
- bio->bi_next = NULL;
- generic_make_request(bio);
- bio = next;
- }
- unplug = 1;
-
- continue;
- }
+ unplug += flush_pending_writes(conf);
- if (list_empty(head))
+ spin_lock_irqsave(&conf->device_lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(&conf->device_lock, flags);
break;
+ }
r10_bio = list_entry(head->prev, r10bio_t, retry_list);
list_del(head->prev);
conf->nr_queued--;
}
}
}
- spin_unlock_irqrestore(&conf->device_lock, flags);
if (unplug)
unplug_slaves(mddev);
}
if (j == conf->copies) {
/* Cannot recover, so abort the recovery */
put_buf(r10_bio);
+ if (rb2)
+ atomic_dec(&rb2->remaining);
r10_bio = rb2;
if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_event_register - Register protocol-specific event callback
- * handler.
+ * mpt_event_register - Register protocol-specific event callback handler.
* @cb_idx: previously registered (via mpt_register) callback handle
* @ev_cbfunc: callback function
*
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_event_deregister - Deregister protocol-specific event callback
- * handler.
+ * mpt_event_deregister - Deregister protocol-specific event callback handler
* @cb_idx: previously registered callback handle
*
* Each protocol-specific driver should call this routine
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_get_msg_frame - Obtain a MPT request frame from the pool (of 1024)
- * allocated per MPT adapter.
+ * mpt_get_msg_frame - Obtain an MPT request frame from the pool
* @cb_idx: Handle of registered MPT protocol driver
* @ioc: Pointer to MPT adapter structure
*
+ * Obtain an MPT request frame from the pool (of 1024) that are
+ * allocated per MPT adapter.
+ *
* Returns pointer to a MPT request frame or %NULL if none are available
* or IOC is not active.
*/
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_put_msg_frame - Send a protocol specific MPT request frame
- * to a IOC.
+ * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
* @cb_idx: Handle of registered MPT protocol driver
* @ioc: Pointer to MPT adapter structure
* @mf: Pointer to MPT request frame
*
- * This routine posts a MPT request frame to the request post FIFO of a
+ * This routine posts an MPT request frame to the request post FIFO of a
* specific MPT adapter.
*/
void
}
/**
- * mpt_put_msg_frame_hi_pri - Send a protocol specific MPT request frame
- * to a IOC using hi priority request queue.
+ * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
* @cb_idx: Handle of registered MPT protocol driver
* @ioc: Pointer to MPT adapter structure
* @mf: Pointer to MPT request frame
*
- * This routine posts a MPT request frame to the request post FIFO of a
+ * Send a protocol-specific MPT request frame to an IOC using
+ * hi-priority request queue.
+ *
+ * This routine posts an MPT request frame to the request post FIFO of a
* specific MPT adapter.
**/
void
if (error)
goto out_free_consistent;
+ if (!buffer->NumPhys) {
+ error = -ENODEV;
+ goto out_free_consistent;
+ }
+
/* save config data */
port_info->num_phys = buffer->NumPhys;
port_info->phy_info = kcalloc(port_info->num_phys,
*
* Remark: Currently invoked from a non-interrupt thread (_bh).
*
- * Remark: With old EH code, at most 1 SCSI TaskMgmt function per IOC
+ * Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
* will be active.
*
* Returns 0 for SUCCESS, or %FAILED.
/**
* mptscsih_get_scsi_lookup
- *
- * retrieves scmd entry from ScsiLookup[] array list
- *
* @ioc: Pointer to MPT_ADAPTER structure
* @i: index into the array
*
- * Returns the scsi_cmd pointer
+ * retrieves scmd entry from ScsiLookup[] array list
*
+ * Returns the scsi_cmd pointer
**/
static struct scsi_cmnd *
mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
/**
* mptscsih_getclear_scsi_lookup
- *
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
* @ioc: Pointer to MPT_ADAPTER structure
* @i: index into the array
*
- * Returns the scsi_cmd pointer
+ * retrieves and clears scmd entry from ScsiLookup[] array list
*
+ * Returns the scsi_cmd pointer
**/
static struct scsi_cmnd *
mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
unsigned int pdev_id;
unsigned int irq;
void __iomem *regs;
+ unsigned int rev;
};
#define MHZ (1000 * 1000)
#ifdef DEBUG
-static const unsigned int misc_div[] = {
- [0] = 1,
- [1] = 2,
- [2] = 4,
- [3] = 8,
- [4] = 16,
- [5] = 32,
- [6] = 64,
- [7] = 128,
- [8] = 3,
- [9] = 6,
- [10] = 12,
- [11] = 24,
- [12] = 48,
- [13] = 96,
- [14] = 192,
- [15] = 384,
-};
-
-static const unsigned int px_div[] = {
+static const unsigned int div_tab[] = {
[0] = 1,
[1] = 2,
[2] = 4,
static unsigned long decode_div(unsigned long pll2, unsigned long val,
unsigned int lshft, unsigned int selbit,
- unsigned long mask, const unsigned int *dtab)
+ unsigned long mask)
{
if (val & selbit)
pll2 = 288 * MHZ;
- return pll2 / dtab[(val >> lshft) & mask];
+ return pll2 / div_tab[(val >> lshft) & mask];
}
#define fmt_freq(x) ((x) / MHZ), ((x) % MHZ), (x)
}
sdclk0 = (misct & (1<<12)) ? pll2 : 288 * MHZ;
- sdclk0 /= misc_div[((misct >> 8) & 0xf)];
+ sdclk0 /= div_tab[((misct >> 8) & 0xf)];
sdclk1 = (misct & (1<<20)) ? pll2 : 288 * MHZ;
- sdclk1 /= misc_div[((misct >> 16) & 0xf)];
+ sdclk1 /= div_tab[((misct >> 16) & 0xf)];
dev_dbg(sm->dev, "MISCT=%08lx, PM0=%08lx, PM1=%08lx\n",
misct, pm0, pm1);
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
(pmc & 3 ) == 0 ? '*' : '-',
- fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31, px_div)),
- fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15, misc_div)));
+ fmt_freq(decode_div(pll2, pm0, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm0, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm0, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm0, 0, 1<<4, 15)));
dev_dbg(sm->dev, "PM1[%c]: "
"P2 %ld.%ld MHz (%ld), V2 %ld.%ld (%ld), "
"M %ld.%ld (%ld), MX1 %ld.%ld (%ld)\n",
(pmc & 3 ) == 1 ? '*' : '-',
- fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31, px_div)),
- fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15, misc_div)),
- fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15, misc_div)));
+ fmt_freq(decode_div(pll2, pm1, 24, 1<<29, 31)),
+ fmt_freq(decode_div(pll2, pm1, 16, 1<<20, 15)),
+ fmt_freq(decode_div(pll2, pm1, 8, 1<<12, 15)),
+ fmt_freq(decode_div(pll2, pm1, 0, 1<<4, 15)));
}
static void sm501_dump_regs(struct sm501_devdata *sm)
unsigned long mclk;
int divider;
int shift;
+ unsigned int m, n, k;
};
+/* sm501_calc_clock
+ *
+ * Calculates the nearest discrete clock frequency that
+ * can be achieved with the specified input clock.
+ * the maximum divisor is 3 or 5
+ */
+
+static int sm501_calc_clock(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div,
+ unsigned long mclk,
+ long *best_diff)
+{
+ int ret = 0;
+ int divider;
+ int shift;
+ long diff;
+
+ /* try dividers 1 and 3 for CRT and for panel,
+ try divider 5 for panel only.*/
+
+ for (divider = 1; divider <= max_div; divider += 2) {
+ /* try all 8 shift values.*/
+ for (shift = 0; shift < 8; shift++) {
+ /* Calculate difference to requested clock */
+ diff = sm501fb_round_div(mclk, divider << shift) - freq;
+ if (diff < 0)
+ diff = -diff;
+
+ /* If it is less than the current, use it */
+ if (diff < *best_diff) {
+ *best_diff = diff;
+
+ clock->mclk = mclk;
+ clock->divider = divider;
+ clock->shift = shift;
+ ret = 1;
+ }
+ }
+ }
+
+ return ret;
+}
+
+/* sm501_calc_pll
+ *
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the programmable PLL.
+ * the maximum divisor is 3 or 5
+ */
+
+static unsigned long sm501_calc_pll(unsigned long freq,
+ struct sm501_clock *clock,
+ int max_div)
+{
+ unsigned long mclk;
+ unsigned int m, n, k;
+ long best_diff = 999999999;
+
+ /*
+ * The SM502 datasheet doesn't specify the min/max values for M and N.
+ * N = 1 at least doesn't work in practice.
+ */
+ for (m = 2; m <= 255; m++) {
+ for (n = 2; n <= 127; n++) {
+ for (k = 0; k <= 1; k++) {
+ mclk = (24000000UL * m / n) >> k;
+
+ if (sm501_calc_clock(freq, clock, max_div,
+ mclk, &best_diff)) {
+ clock->m = m;
+ clock->n = n;
+ clock->k = k;
+ }
+ }
+ }
+ }
+
+ /* Return best clock. */
+ return clock->mclk / (clock->divider << clock->shift);
+}
+
/* sm501_select_clock
*
- * selects nearest discrete clock frequency the SM501 can achive
+ * Calculates the nearest discrete clock frequency that can be
+ * achieved using the 288MHz and 336MHz PLLs.
* the maximum divisor is 3 or 5
*/
+
static unsigned long sm501_select_clock(unsigned long freq,
struct sm501_clock *clock,
int max_div)
{
unsigned long mclk;
- int divider;
- int shift;
- long diff;
long best_diff = 999999999;
/* Try 288MHz and 336MHz clocks. */
for (mclk = 288000000; mclk <= 336000000; mclk += 48000000) {
- /* try dividers 1 and 3 for CRT and for panel,
- try divider 5 for panel only.*/
-
- for (divider = 1; divider <= max_div; divider += 2) {
- /* try all 8 shift values.*/
- for (shift = 0; shift < 8; shift++) {
- /* Calculate difference to requested clock */
- diff = sm501fb_round_div(mclk, divider << shift) - freq;
- if (diff < 0)
- diff = -diff;
-
- /* If it is less than the current, use it */
- if (diff < best_diff) {
- best_diff = diff;
-
- clock->mclk = mclk;
- clock->divider = divider;
- clock->shift = shift;
- }
- }
- }
+ sm501_calc_clock(freq, clock, max_div, mclk, &best_diff);
}
/* Return best clock. */
unsigned long gate = readl(sm->regs + SM501_CURRENT_GATE);
unsigned long clock = readl(sm->regs + SM501_CURRENT_CLOCK);
unsigned char reg;
+ unsigned int pll_reg = 0;
unsigned long sm501_freq; /* the actual frequency acheived */
struct sm501_clock to;
* requested frequency the value must be multiplied by
* 2. This clock also has an additional pre divisor */
- sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
- reg=to.shift & 0x07;/* bottom 3 bits are shift */
- if (to.divider == 3)
- reg |= 0x08; /* /3 divider required */
- else if (to.divider == 5)
- reg |= 0x10; /* /5 divider required */
- if (to.mclk != 288000000)
- reg |= 0x20; /* which mclk pll is source */
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ reg |= 0x40; /* select the programmable PLL */
+ pll_reg = 0x20000 | (to.k << 15) | (to.n << 8) | to.m;
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ reg = to.shift & 0x07;/* bottom 3 bits are shift */
+ if (to.divider == 3)
+ reg |= 0x08; /* /3 divider required */
+ else if (to.divider == 5)
+ reg |= 0x10; /* /5 divider required */
+ if (to.mclk != 288000000)
+ reg |= 0x20; /* which mclk pll is source */
+ }
break;
case SM501_CLOCK_V2XCLK:
}
writel(mode, sm->regs + SM501_POWER_MODE_CONTROL);
+
+ if (pll_reg)
+ writel(pll_reg, sm->regs + SM501_PROGRAMMABLE_PLL_CONTROL);
+
sm501_sync_regs(sm);
dev_info(sm->dev, "gate %08lx, clock %08lx, mode %08lx\n",
* finds the closest available frequency for a given clock
*/
-unsigned long sm501_find_clock(int clksrc,
+unsigned long sm501_find_clock(struct device *dev,
+ int clksrc,
unsigned long req_freq)
{
+ struct sm501_devdata *sm = dev_get_drvdata(dev);
unsigned long sm501_freq; /* the frequency achiveable by the 501 */
struct sm501_clock to;
switch (clksrc) {
case SM501_CLOCK_P2XCLK:
- sm501_freq = (sm501_select_clock(2 * req_freq, &to, 5) / 2);
+ if (sm->rev >= 0xC0) {
+ /* SM502 -> use the programmable PLL */
+ sm501_freq = (sm501_calc_pll(2 * req_freq,
+ &to, 5) / 2);
+ } else {
+ sm501_freq = (sm501_select_clock(2 * req_freq,
+ &to, 5) / 2);
+ }
break;
case SM501_CLOCK_V2XCLK:
dev_info(sm->dev, "SM501 At %p: Version %08lx, %ld Mb, IRQ %d\n",
sm->regs, devid, (unsigned long)mem_avail >> 20, sm->irq);
+ sm->rev = devid & SM501_DEVICEID_REVMASK;
+
sm501_dump_gate(sm);
ret = device_create_file(sm->dev, &dev_attr_dbg_regs);
if (!acpi_evalf(hkey_handle, &s, "MHKG", "d"))
return -EIO;
- return ((s & TP_HOTKEY_TABLET_MASK) != 0);
+ *status = ((s & TP_HOTKEY_TABLET_MASK) != 0);
+ return 0;
}
/*
mutex_unlock(&ubi_devices_mutex);
if (err < 0) {
put_mtd_device(mtd);
- printk(KERN_ERR "UBI error: cannot attach %s\n",
- p->name);
+ printk(KERN_ERR "UBI error: cannot attach mtd%d\n",
+ mtd->index);
goto out_detach;
}
}
void *upd_buf;
int *eba_tbl;
- int checked:1;
- int corrupted:1;
- int upd_marker:1;
- int updating:1;
- int changing_leb:1;
+ unsigned int checked:1;
+ unsigned int corrupted:1;
+ unsigned int upd_marker:1;
+ unsigned int updating:1;
+ unsigned int changing_leb:1;
#ifdef CONFIG_MTD_UBI_GLUEBI
/*
get_device(&vol->dev);
volume_sysfs_close(vol);
out_gluebi:
- ubi_destroy_gluebi(vol);
+ if (ubi_destroy_gluebi(vol))
+ dbg_err("cannot destroy gluebi for volume %d:%d",
+ ubi->ubi_num, vol_id);
out_cdev:
cdev_del(&vol->cdev);
out_mapping:
if (ubi->autoresize_vol_id != -1) {
ubi_err("more then one auto-resize volume (%d "
"and %d)", ubi->autoresize_vol_id, i);
+ kfree(vol);
return -EINVAL;
}
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(idp->irq, idp->handler, 0, idp->name, dev) != 0)
+ if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq);
}
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, 0, idp->name, dev) != 0)
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
}
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
}
/* Setup interrupt handlers. */
for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq,fec_enet_interrupt,0,idp->name,dev)!=0)
+ if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
printk("FEC: Could not allocate %s IRQ(%d)!\n",
idp->name, b+idp->irq);
}
skb_queue_len(&session->reorder_q));
__skb_unlink(skb, &session->reorder_q);
kfree_skb(skb);
+ sock_put(session->sock);
continue;
}
for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) {
again:
hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) {
+ struct sk_buff *skb;
+
session = hlist_entry(walk, struct pppol2tp_session, hlist);
sk = session->sock;
/* Purge any queued data */
skb_queue_purge(&sk->sk_receive_queue);
skb_queue_purge(&sk->sk_write_queue);
- skb_queue_purge(&session->reorder_q);
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ kfree_skb(skb);
+ sock_put(sk);
+ }
release_sock(sk);
sock_put(sk);
case SIOCSIFHWADDR:
{
/* try to set the actual net device's hw address */
- int ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
+ int ret;
+
+ rtnl_lock();
+ ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr);
+ rtnl_unlock();
if (ret == 0) {
/** Set the character device's hardware address. This is used when
#ifdef CONFIG_B43LEGACY_DMA
feat_dma = "D";
#endif
- printk(KERN_INFO "Broadcom 43xx driver loaded "
+ printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
"[ Features: %s%s%s%s%s, Firmware-ID: "
B43legacy_SUPPORTED_FIRMWARE_ID " ]\n",
feat_pci, feat_leds, feat_rfkill, feat_pio, feat_dma);
}
resp = (void *)priv->upld_buf;
-
- curcmd = le16_to_cpu(resp->command);
-
+ curcmd = le16_to_cpu(priv->cur_cmd->cmdbuf->command);
respcmd = le16_to_cpu(resp->command);
result = le16_to_cpu(resp->result);
respcmd, le16_to_cpu(resp->seqnum), priv->upld_len, jiffies);
lbs_deb_hex(LBS_DEB_HOST, "CMD_RESP", (void *) resp, priv->upld_len);
- if (resp->seqnum != resp->seqnum) {
+ if (resp->seqnum != priv->cur_cmd->cmdbuf->seqnum) {
lbs_pr_info("Received CMD_RESP with invalid sequence %d (expected %d)\n",
- le16_to_cpu(resp->seqnum), le16_to_cpu(resp->seqnum));
+ le16_to_cpu(resp->seqnum), le16_to_cpu(priv->cur_cmd->cmdbuf->seqnum));
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
goto done;
struct p54_common *priv = dev->priv;
struct eeprom_pda_wrap *wrap = NULL;
struct pda_entry *entry;
- int i = 0;
unsigned int data_len, entry_len;
void *tmp;
int err;
+ u8 *end = (u8 *)eeprom + len;
wrap = (struct eeprom_pda_wrap *) eeprom;
- entry = (void *)wrap->data + wrap->len;
- i += 2;
- i += le16_to_cpu(entry->len)*2;
- while (i < len) {
+ entry = (void *)wrap->data + le16_to_cpu(wrap->len);
+
+ /* verify that at least the entry length/code fits */
+ while ((u8 *)entry <= end - sizeof(*entry)) {
entry_len = le16_to_cpu(entry->len);
data_len = ((entry_len - 1) << 1);
+
+ /* abort if entry exceeds whole structure */
+ if ((u8 *)entry + sizeof(*entry) + data_len > end)
+ break;
+
switch (le16_to_cpu(entry->code)) {
case PDR_MAC_ADDRESS:
SET_IEEE80211_PERM_ADDR(dev, entry->data);
priv->version = *(u8 *)(entry->data + 1);
break;
case PDR_END:
- i = len;
+ /* make it overrun */
+ entry_len = len;
break;
}
entry = (void *)entry + (entry_len + 1)*2;
- i += 2;
- i += entry_len*2;
}
if (!priv->iq_autocal || !priv->output_limit || !priv->curve_data) {
} __attribute__ ((packed));
struct eeprom_pda_wrap {
- u32 magic;
- u16 pad;
- u16 len;
- u32 arm_opcode;
+ __le32 magic;
+ __le16 pad;
+ __le16 len;
+ __le32 arm_opcode;
u8 data[0];
} __attribute__ ((packed));
__le32 KeyLength;
u8 Bssid[6];
u8 Padding[6];
- __le64 KeyRSC;
+ u8 KeyRSC[8];
u8 KeyMaterial[32];
} __attribute__((packed));
struct usbnet *usbdev = dev->priv;
struct rndis_wext_private *priv = get_rndis_wext_priv(usbdev);
struct NDIS_802_11_KEY ndis_key;
- int i, keyidx, ret;
+ int keyidx, ret;
u8 *addr;
keyidx = wrqu->encoding.flags & IW_ENCODE_INDEX;
ndis_key.KeyIndex = cpu_to_le32(keyidx);
if (ext->ext_flags & IW_ENCODE_EXT_RX_SEQ_VALID) {
- for (i = 0; i < 6; i++)
- ndis_key.KeyRSC |=
- cpu_to_le64(ext->rx_seq[i] << (i * 8));
+ memcpy(ndis_key.KeyRSC, ext->rx_seq, 6);
ndis_key.KeyIndex |= cpu_to_le32(1 << 29);
}
depends on PCI_LBA
default PCI_LBA
+config IOMMU_HELPER
+ bool
+ depends on IOMMU_SBA || IOMMU_CCIO
+ default y
+
#config PCI_EPIC
# bool "EPIC/SAGA PCI support"
# depends on PCI
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
#include <asm/byteorder.h>
#include <asm/cache.h> /* for L1_CACHE_BYTES */
*/
#define CCIO_SEARCH_LOOP(ioc, res_idx, mask, size) \
for(; res_ptr < res_end; ++res_ptr) { \
- if(0 == (*res_ptr & mask)) { \
- *res_ptr |= mask; \
- res_idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
- ioc->res_hint = res_idx + (size >> 3); \
- goto resource_found; \
- } \
- }
+ int ret;\
+ unsigned int idx;\
+ idx = (unsigned int)((unsigned long)res_ptr - (unsigned long)ioc->res_map); \
+ ret = iommu_is_span_boundary(idx << 3, pages_needed, 0, boundary_size);\
+ if ((0 == (*res_ptr & mask)) && !ret) { \
+ *res_ptr |= mask; \
+ res_idx = idx;\
+ ioc->res_hint = res_idx + (size >> 3); \
+ goto resource_found; \
+ } \
+ }
#define CCIO_FIND_FREE_MAPPING(ioa, res_idx, mask, size) \
u##size *res_ptr = (u##size *)&((ioc)->res_map[ioa->res_hint & ~((size >> 3) - 1)]); \
* of available pages for the requested size.
*/
static int
-ccio_alloc_range(struct ioc *ioc, size_t size)
+ccio_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
unsigned int res_idx;
+ unsigned long boundary_size;
#ifdef CCIO_SEARCH_TIME
unsigned long cr_start = mfctl(16);
#endif
** ggg sacrifices another 710 to the computer gods.
*/
+ boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+ 1ULL << IOVP_SHIFT) >> IOVP_SHIFT;
+
if (pages_needed <= 8) {
/*
* LAN traffic will not thrash the TLB IFF the same NIC
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
- idx = ccio_alloc_range(ioc, size);
+ idx = ccio_alloc_range(ioc, dev, size);
iovp = (dma_addr_t)MKIOVP(idx);
pdir_start = &(ioc->pdir_base[idx]);
static inline unsigned int
iommu_coalesce_chunks(struct ioc *ioc, struct device *dev,
- struct scatterlist *startsg, int nents,
- int (*iommu_alloc_range)(struct ioc *, size_t))
+ struct scatterlist *startsg, int nents,
+ int (*iommu_alloc_range)(struct ioc *, struct device *, size_t))
{
struct scatterlist *contig_sg; /* contig chunk head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
dma_len = ALIGN(dma_len + dma_offset, IOVP_SIZE);
sg_dma_address(contig_sg) =
PIDE_FLAG
- | (iommu_alloc_range(ioc, dma_len) << IOVP_SHIFT)
+ | (iommu_alloc_range(ioc, dev, dma_len) << IOVP_SHIFT)
| dma_offset;
n_mappings++;
}
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/scatterlist.h>
+#include <linux/iommu-helper.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n)))
#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
+unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
+ unsigned int bitshiftcnt)
+{
+ return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
+ + bitshiftcnt;
+}
/**
* sba_search_bitmap - find free space in IO PDIR resource bitmap
* Cool perf optimization: search for log2(size) bits at a time.
*/
static SBA_INLINE unsigned long
-sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
+sba_search_bitmap(struct ioc *ioc, struct device *dev,
+ unsigned long bits_wanted)
{
unsigned long *res_ptr = ioc->res_hint;
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
- unsigned long pide = ~0UL;
+ unsigned long pide = ~0UL, tpide;
+ unsigned long boundary_size;
+ unsigned long shift;
+ int ret;
+
+ boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+ 1ULL << IOVP_SHIFT) >> IOVP_SHIFT;
+
+#if defined(ZX1_SUPPORT)
+ BUG_ON(ioc->ibase & ~IOVP_MASK);
+ shift = ioc->ibase >> IOVP_SHIFT;
+#else
+ shift = 0;
+#endif
if (bits_wanted > (BITS_PER_LONG/2)) {
/* Search word at a time - no mask needed */
for(; res_ptr < res_end; ++res_ptr) {
- if (*res_ptr == 0) {
+ tpide = ptr_to_pide(ioc, res_ptr, 0);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift,
+ boundary_size);
+ if ((*res_ptr == 0) && !ret) {
*res_ptr = RESMAP_MASK(bits_wanted);
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
+ pide = tpide;
break;
}
}
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
WARN_ON(mask == 0);
- if(((*res_ptr) & mask) == 0) {
+ tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
+ ret = iommu_is_span_boundary(tpide, bits_wanted,
+ shift,
+ boundary_size);
+ if ((((*res_ptr) & mask) == 0) && !ret) {
*res_ptr |= mask; /* mark resources busy! */
- pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
- pide <<= 3; /* convert to bit address */
- pide += bitshiftcnt;
+ pide = tpide;
break;
}
mask >>= o;
* resource bit map.
*/
static int
-sba_alloc_range(struct ioc *ioc, size_t size)
+sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
#ifdef SBA_COLLECT_STATS
#endif
unsigned long pide;
- pide = sba_search_bitmap(ioc, pages_needed);
+ pide = sba_search_bitmap(ioc, dev, pages_needed);
if (pide >= (ioc->res_size << 3)) {
- pide = sba_search_bitmap(ioc, pages_needed);
+ pide = sba_search_bitmap(ioc, dev, pages_needed);
if (pide >= (ioc->res_size << 3))
panic("%s: I/O MMU @ %p is out of mapping resources\n",
__FILE__, ioc->ioc_hpa);
ioc->msingle_calls++;
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
- pide = sba_alloc_range(ioc, size);
+ pide = sba_alloc_range(ioc, dev, size);
iovp = (dma_addr_t) pide << IOVP_SHIFT;
DBG_RUN("%s() 0x%p -> 0x%lx\n",
child_bus = dev->subordinate;
child_bus->dev.parent = child_bus->bridge;
retval = device_register(&child_bus->dev);
- if (!retval)
+ if (retval)
+ dev_err(&dev->dev, "Error registering pci_bus,"
+ " continuing...\n");
+ else
retval = device_create_file(&child_bus->dev,
&dev_attr_cpuaffinity);
if (retval)
- dev_err(&dev->dev, "Error registering pci_bus"
- " device bridge symlink,"
- " continuing...\n");
+ dev_err(&dev->dev, "Error creating cpuaffinity"
+ " file, continuing...\n");
}
}
}
#include "pci.h"
-unsigned int pci_do_scan_bus(struct pci_bus *bus)
+unsigned int __devinit pci_do_scan_bus(struct pci_bus *bus)
{
unsigned int max;
* This function should be called per *physical slot*,
* not per each slot object in ACPI namespace.
*/
-static int enable_device(struct acpiphp_slot *slot)
+static int __ref enable_device(struct acpiphp_slot *slot)
{
struct pci_dev *dev;
struct pci_bus *bus = slot->bridge->pci_bus;
* Device configuration functions
*/
-int cpci_configure_slot(struct slot* slot)
+int __ref cpci_configure_slot(struct slot *slot)
{
struct pci_bus *parent;
int fn;
retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
- return -1;
+ retval = -1;
+ goto out;
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
* removed from the slot/adapter.
*/
msleep(1000);
-
+ out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
}
}
-static int pciehp_add_bridge(struct pci_dev *dev)
+static int __ref pciehp_add_bridge(struct pci_dev *dev)
{
struct pci_bus *parent = dev->bus;
int pass, busnr, start = parent->secondary;
}
}
-int shpchp_configure_device(struct slot *p_slot)
+int __ref shpchp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
}
}
-void pci_read_bridge_bases(struct pci_bus *child)
+void __devinit pci_read_bridge_bases(struct pci_bus *child)
{
struct pci_dev *dev = child->self;
u8 io_base_lo, io_limit_lo;
* them, we proceed to assigning numbers to the remaining buses in
* order to avoid overlaps between old and new bus numbers.
*/
-int pci_scan_bridge(struct pci_bus *bus, struct pci_dev * dev, int max, int pass)
+int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
{
struct pci_bus *child;
int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS);
return nr;
}
-unsigned int pci_scan_child_bus(struct pci_bus *bus)
+unsigned int __devinit pci_scan_child_bus(struct pci_bus *bus)
{
unsigned int devfn, pass, max = bus->secondary;
struct pci_dev *dev;
return NULL;
}
-struct pci_bus *pci_scan_bus_parented(struct device *parent,
+struct pci_bus * __devinit pci_scan_bus_parented(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
struct pci_bus *b;
pci_write_config_byte(dev, 0x75, 0x1);
pci_write_config_byte(dev, 0x77, 0x0);
- printk(KERN_INFO
- "PCI: VIA CX700 PCI parking/caching fixup on %s\n",
- pci_name(dev));
+ dev_info(&dev->dev,
+ "Disabling VIA CX700 PCI parking/caching\n");
}
}
}
quirk_msi_ht_cap);
-/*
- * Force enable MSI mapping capability on HT bridges
- */
-static void __devinit quirk_msi_ht_cap_enable(struct pci_dev *dev)
-{
- int pos, ttl = 48;
-
- pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
- while (pos && ttl--) {
- u8 flags;
-
- if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, &flags) == 0) {
- printk(KERN_INFO "PCI: Enabling HT MSI Mapping on %s\n",
- pci_name(dev));
-
- pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
- flags | HT_MSI_FLAGS_ENABLE);
- }
- pos = pci_find_next_ht_capability(dev, pos,
- HT_CAPTYPE_MSI_MAPPING);
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
- quirk_msi_ht_cap_enable);
-
/* The nVidia CK804 chipset may have 2 HT MSI mappings.
* MSI are supported if the MSI capability set in any of these mappings.
*/
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_msi_ht_cap);
-/*
- * Force enable MSI mapping capability on HT bridges */
-static inline void ht_enable_msi_mapping(struct pci_dev *dev)
+/* Force enable MSI mapping capability on HT bridges */
+static void __devinit ht_enable_msi_mapping(struct pci_dev *dev)
{
int pos, ttl = 48;
HT_CAPTYPE_MSI_MAPPING);
}
}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS,
+ PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB,
+ ht_enable_msi_mapping);
static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
{
if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
&flags) == 0) {
- dev_info(&dev->dev, "Quirk disabling HT MSI mapping");
+ dev_info(&dev->dev, "Disabling HT MSI mapping");
pci_write_config_byte(dev, pos + HT_MSI_FLAGS,
flags & ~HT_MSI_FLAGS_ENABLE);
}
#endif /* 0 */
/**
- * pci_cleanup_rom - internal routine for freeing the ROM copy created
- * by pci_map_rom_copy called from remove.c
+ * pci_cleanup_rom - free the ROM copy created by pci_map_rom_copy
* @pdev: pointer to pci device struct
*
* Free the copied ROM if we allocated one.
}
/**
- * rio_device_probe - Tell if a RIO device structure has a matching RIO
- * device id structure
+ * rio_device_probe - Tell if a RIO device structure has a matching RIO device id structure
* @id: the RIO device id structure to match against
* @dev: the RIO device structure to match against
*
* rio_register_driver - register a new RIO driver
* @rdrv: the RIO driver structure to register
*
- * Adds a &struct rio_driver to the list of registered drivers
+ * Adds a &struct rio_driver to the list of registered drivers.
* Returns a negative value on error, otherwise 0. If no error
* occurred, the driver remains registered even if no device
* was claimed during registration.
}
/**
- * rio_match_bus - Tell if a RIO device structure has a matching RIO
- * driver device id structure
+ * rio_match_bus - Tell if a RIO device structure has a matching RIO driver device id structure
* @dev: the standard device structure to match against
* @drv: the standard driver structure containing the ids to match against
*
platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
+config RTC_DRV_S35390A
+ tristate "Seiko Instruments S-35390A"
+ help
+ If you say yes here you will get support for the Seiko
+ Instruments S-35390A.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-s35390a.
+
endif # I2C
comment "SPI RTC drivers"
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
obj-$(CONFIG_RTC_DRV_RS5C372) += rtc-rs5c372.o
+obj-$(CONFIG_RTC_DRV_S35390A) += rtc-s35390a.o
obj-$(CONFIG_RTC_DRV_S3C) += rtc-s3c.o
obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o
obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o
--- /dev/null
+/*
+ * Seiko Instruments S-35390A RTC Driver
+ *
+ * Copyright (c) 2007 Byron Bradley
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/rtc.h>
+#include <linux/i2c.h>
+#include <linux/bitrev.h>
+#include <linux/bcd.h>
+#include <linux/slab.h>
+
+#define S35390A_CMD_STATUS1 0
+#define S35390A_CMD_STATUS2 1
+#define S35390A_CMD_TIME1 2
+
+#define S35390A_BYTE_YEAR 0
+#define S35390A_BYTE_MONTH 1
+#define S35390A_BYTE_DAY 2
+#define S35390A_BYTE_WDAY 3
+#define S35390A_BYTE_HOURS 4
+#define S35390A_BYTE_MINS 5
+#define S35390A_BYTE_SECS 6
+
+#define S35390A_FLAG_POC 0x01
+#define S35390A_FLAG_BLD 0x02
+#define S35390A_FLAG_24H 0x40
+#define S35390A_FLAG_RESET 0x80
+#define S35390A_FLAG_TEST 0x01
+
+struct s35390a {
+ struct i2c_client *client[8];
+ struct rtc_device *rtc;
+ int twentyfourhour;
+};
+
+static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+ struct i2c_client *client = s35390a->client[reg];
+ struct i2c_msg msg[] = {
+ { client->addr, 0, len, buf },
+ };
+
+ if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+{
+ struct i2c_client *client = s35390a->client[reg];
+ struct i2c_msg msg[] = {
+ { client->addr, I2C_M_RD, len, buf },
+ };
+
+ if ((i2c_transfer(client->adapter, msg, 1)) != 1)
+ return -EIO;
+
+ return 0;
+}
+
+static int s35390a_reset(struct s35390a *s35390a)
+{
+ char buf[1];
+
+ if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf)) < 0)
+ return -EIO;
+
+ if (!(buf[0] & (S35390A_FLAG_POC | S35390A_FLAG_BLD)))
+ return 0;
+
+ buf[0] |= (S35390A_FLAG_RESET | S35390A_FLAG_24H);
+ buf[0] &= 0xf0;
+ return s35390a_set_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+}
+
+static int s35390a_disable_test_mode(struct s35390a *s35390a)
+{
+ char buf[1];
+
+ if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
+ return -EIO;
+
+ if (!(buf[0] & S35390A_FLAG_TEST))
+ return 0;
+
+ buf[0] &= ~S35390A_FLAG_TEST;
+ return s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf));
+}
+
+static char s35390a_hr2reg(struct s35390a *s35390a, int hour)
+{
+ if (s35390a->twentyfourhour)
+ return BIN2BCD(hour);
+
+ if (hour < 12)
+ return BIN2BCD(hour);
+
+ return 0x40 | BIN2BCD(hour - 12);
+}
+
+static int s35390a_reg2hr(struct s35390a *s35390a, char reg)
+{
+ unsigned hour;
+
+ if (s35390a->twentyfourhour)
+ return BCD2BIN(reg & 0x3f);
+
+ hour = BCD2BIN(reg & 0x3f);
+ if (reg & 0x40)
+ hour += 12;
+
+ return hour;
+}
+
+static int s35390a_set_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ int i, err;
+ char buf[7];
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
+ "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+ tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+ tm->tm_wday);
+
+ buf[S35390A_BYTE_YEAR] = BIN2BCD(tm->tm_year - 100);
+ buf[S35390A_BYTE_MONTH] = BIN2BCD(tm->tm_mon + 1);
+ buf[S35390A_BYTE_DAY] = BIN2BCD(tm->tm_mday);
+ buf[S35390A_BYTE_WDAY] = BIN2BCD(tm->tm_wday);
+ buf[S35390A_BYTE_HOURS] = s35390a_hr2reg(s35390a, tm->tm_hour);
+ buf[S35390A_BYTE_MINS] = BIN2BCD(tm->tm_min);
+ buf[S35390A_BYTE_SECS] = BIN2BCD(tm->tm_sec);
+
+ /* This chip expects the bits of each byte to be in reverse order */
+ for (i = 0; i < 7; ++i)
+ buf[i] = bitrev8(buf[i]);
+
+ err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+
+ return err;
+}
+
+static int s35390a_get_datetime(struct i2c_client *client, struct rtc_time *tm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ char buf[7];
+ int i, err;
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
+ if (err < 0)
+ return err;
+
+ /* This chip returns the bits of each byte in reverse order */
+ for (i = 0; i < 7; ++i)
+ buf[i] = bitrev8(buf[i]);
+
+ tm->tm_sec = BCD2BIN(buf[S35390A_BYTE_SECS]);
+ tm->tm_min = BCD2BIN(buf[S35390A_BYTE_MINS]);
+ tm->tm_hour = s35390a_reg2hr(s35390a, buf[S35390A_BYTE_HOURS]);
+ tm->tm_wday = BCD2BIN(buf[S35390A_BYTE_WDAY]);
+ tm->tm_mday = BCD2BIN(buf[S35390A_BYTE_DAY]);
+ tm->tm_mon = BCD2BIN(buf[S35390A_BYTE_MONTH]) - 1;
+ tm->tm_year = BCD2BIN(buf[S35390A_BYTE_YEAR]) + 100;
+
+ dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d, mday=%d, "
+ "mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
+ tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year,
+ tm->tm_wday);
+
+ return rtc_valid_tm(tm);
+}
+
+static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ return s35390a_get_datetime(to_i2c_client(dev), tm);
+}
+
+static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return s35390a_set_datetime(to_i2c_client(dev), tm);
+}
+
+static const struct rtc_class_ops s35390a_rtc_ops = {
+ .read_time = s35390a_rtc_read_time,
+ .set_time = s35390a_rtc_set_time,
+};
+
+static struct i2c_driver s35390a_driver;
+
+static int s35390a_probe(struct i2c_client *client)
+{
+ int err;
+ unsigned int i;
+ struct s35390a *s35390a;
+ struct rtc_time tm;
+ char buf[1];
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ s35390a = kzalloc(sizeof(struct s35390a), GFP_KERNEL);
+ if (!s35390a) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ s35390a->client[0] = client;
+ i2c_set_clientdata(client, s35390a);
+
+ /* This chip uses multiple addresses, use dummy devices for them */
+ for (i = 1; i < 8; ++i) {
+ s35390a->client[i] = i2c_new_dummy(client->adapter,
+ client->addr + i, "rtc-s35390a");
+ if (!s35390a->client[i]) {
+ dev_err(&client->dev, "Address %02x unavailable\n",
+ client->addr + i);
+ err = -EBUSY;
+ goto exit_dummy;
+ }
+ }
+
+ err = s35390a_reset(s35390a);
+ if (err < 0) {
+ dev_err(&client->dev, "error resetting chip\n");
+ goto exit_dummy;
+ }
+
+ err = s35390a_disable_test_mode(s35390a);
+ if (err < 0) {
+ dev_err(&client->dev, "error disabling test mode\n");
+ goto exit_dummy;
+ }
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
+ if (err < 0) {
+ dev_err(&client->dev, "error checking 12/24 hour mode\n");
+ goto exit_dummy;
+ }
+ if (buf[0] & S35390A_FLAG_24H)
+ s35390a->twentyfourhour = 1;
+ else
+ s35390a->twentyfourhour = 0;
+
+ if (s35390a_get_datetime(client, &tm) < 0)
+ dev_warn(&client->dev, "clock needs to be set\n");
+
+ s35390a->rtc = rtc_device_register(s35390a_driver.driver.name,
+ &client->dev, &s35390a_rtc_ops, THIS_MODULE);
+
+ if (IS_ERR(s35390a->rtc)) {
+ err = PTR_ERR(s35390a->rtc);
+ goto exit_dummy;
+ }
+ return 0;
+
+exit_dummy:
+ for (i = 1; i < 8; ++i)
+ if (s35390a->client[i])
+ i2c_unregister_device(s35390a->client[i]);
+ kfree(s35390a);
+ i2c_set_clientdata(client, NULL);
+
+exit:
+ return err;
+}
+
+static int s35390a_remove(struct i2c_client *client)
+{
+ unsigned int i;
+
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ for (i = 1; i < 8; ++i)
+ if (s35390a->client[i])
+ i2c_unregister_device(s35390a->client[i]);
+
+ rtc_device_unregister(s35390a->rtc);
+ kfree(s35390a);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+static struct i2c_driver s35390a_driver = {
+ .driver = {
+ .name = "rtc-s35390a",
+ },
+ .probe = s35390a_probe,
+ .remove = s35390a_remove,
+};
+
+static int __init s35390a_rtc_init(void)
+{
+ return i2c_add_driver(&s35390a_driver);
+}
+
+static void __exit s35390a_rtc_exit(void)
+{
+ i2c_del_driver(&s35390a_driver);
+}
+
+MODULE_AUTHOR("Byron Bradley <byron.bbradley@gmail.com>");
+MODULE_DESCRIPTION("S35390A RTC driver");
+MODULE_LICENSE("GPL");
+
+module_init(s35390a_rtc_init);
+module_exit(s35390a_rtc_exit);
dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, struct dasd_ccw_req *cqr2)
{
- /* check failed CCW */
- if (cqr1->irb.scsw.cpa != cqr2->irb.scsw.cpa) {
- // return 0; /* CCW doesn't match */
- }
+ if (cqr1->startdev != cqr2->startdev)
+ return 0;
if (cqr1->irb.esw.esw0.erw.cons != cqr2->irb.esw.esw0.erw.cons)
return 0;
return 0;
if (device->block)
block = device->block;
- else
+ else {
+ dasd_put_device(device);
return 0;
+ }
/* Print device number. */
seq_printf(m, "%s", device->cdev->dev.bus_id);
/* Print discipline string. */
};
struct kbdiacruc accent_table[MAX_DIACR] = {
- {'^', 'c', '\003'}, {'^', 'd', '\004'},
- {'^', 'z', '\032'}, {'^', '\012', '\000'},
+ {'^', 'c', 0003}, {'^', 'd', 0004},
+ {'^', 'z', 0032}, {'^', 0012, 0000},
};
unsigned int accent_table_size = 4;
sclp_vt220_emit_current();
}
-#define BUFFER_MAX_DELAY HZ/2
+#define BUFFER_MAX_DELAY HZ/20
/*
* Internal implementation of the write function. Write COUNT bytes of data
int rc;
ap_dev->drv = ap_drv;
- spin_lock_bh(&ap_device_lock);
- list_add(&ap_dev->list, &ap_device_list);
- spin_unlock_bh(&ap_device_lock);
rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
+ if (!rc) {
+ spin_lock_bh(&ap_device_lock);
+ list_add(&ap_dev->list, &ap_device_list);
+ spin_unlock_bh(&ap_device_lock);
+ }
return rc;
}
ap_flush_queue(ap_dev);
del_timer_sync(&ap_dev->timeout);
- if (ap_drv->remove)
- ap_drv->remove(ap_dev);
spin_lock_bh(&ap_device_lock);
list_del_init(&ap_dev->list);
spin_unlock_bh(&ap_device_lock);
+ if (ap_drv->remove)
+ ap_drv->remove(ap_dev);
spin_lock_bh(&ap_dev->lock);
atomic_sub(ap_dev->queue_count, &ap_poll_requests);
spin_unlock_bh(&ap_dev->lock);
int asd_clear_aca(struct domain_device *, u8 *lun);
int asd_clear_task_set(struct domain_device *, u8 *lun);
int asd_lu_reset(struct domain_device *, u8 *lun);
+int asd_I_T_nexus_reset(struct domain_device *dev);
int asd_query_task(struct sas_task *);
/* ---------- Adapter and Port management ---------- */
/* internally generated command */
struct timer_list timer;
- struct completion completion;
+ struct completion *completion;
u8 tag_valid:1;
__be16 tag; /* error recovery only */
ascb->timer.function = NULL;
init_timer(&ascb->timer);
ascb->tc_index = -1;
- init_completion(&ascb->completion);
}
/* Must be called with the tc_index_lock held!
.lldd_abort_task_set = asd_abort_task_set,
.lldd_clear_aca = asd_clear_aca,
.lldd_clear_task_set = asd_clear_task_set,
- .lldd_I_T_nexus_reset = NULL,
+ .lldd_I_T_nexus_reset = asd_I_T_nexus_reset,
.lldd_lu_reset = asd_lu_reset,
.lldd_query_task = asd_query_task,
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
task->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ struct completion *completion = ascb->completion;
spin_unlock_irqrestore(&task->task_state_lock, flags);
ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x "
"stat 0x%x but aborted by upper layer!\n",
task, opcode, ts->resp, ts->stat);
- complete(&ascb->completion);
+ if (completion)
+ complete(completion);
} else {
spin_unlock_irqrestore(&task->task_state_lock, flags);
task->lldd_task = NULL;
return res;
}
-static inline void asd_timedout_common(unsigned long data)
-{
- struct asd_ascb *ascb = (void *) data;
- struct asd_seq_data *seq = &ascb->ha->seq;
- unsigned long flags;
+/* ---------- CLEAR NEXUS ---------- */
- spin_lock_irqsave(&seq->pend_q_lock, flags);
- seq->pending--;
- list_del_init(&ascb->list);
- spin_unlock_irqrestore(&seq->pend_q_lock, flags);
-}
+struct tasklet_completion_status {
+ int dl_opcode;
+ int tmf_state;
+ u8 tag_valid:1;
+ __be16 tag;
+};
+
+#define DECLARE_TCS(tcs) \
+ struct tasklet_completion_status tcs = { \
+ .dl_opcode = 0, \
+ .tmf_state = 0, \
+ .tag_valid = 0, \
+ .tag = 0, \
+ }
-/* ---------- CLEAR NEXUS ---------- */
static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("%s: here\n", __FUNCTION__);
if (!del_timer(&ascb->timer)) {
ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
return;
}
ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
- ascb->uldd_task = (void *) (unsigned long) dl->opcode;
- complete(&ascb->completion);
+ tcs->dl_opcode = dl->opcode;
+ complete(ascb->completion);
+ asd_ascb_free(ascb);
}
static void asd_clear_nexus_timedout(unsigned long data)
{
- struct asd_ascb *ascb = (void *) data;
+ struct asd_ascb *ascb = (void *)data;
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("%s: here\n", __FUNCTION__);
- asd_timedout_common(data);
- ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
- complete(&ascb->completion);
+ tcs->dl_opcode = TMF_RESP_FUNC_FAILED;
+ complete(ascb->completion);
}
#define CLEAR_NEXUS_PRE \
+ struct asd_ascb *ascb; \
+ struct scb *scb; \
+ int res; \
+ DECLARE_COMPLETION_ONSTACK(completion); \
+ DECLARE_TCS(tcs); \
+ \
ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
res = 1; \
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
if (!ascb) \
return -ENOMEM; \
\
+ ascb->completion = &completion; \
+ ascb->uldd_task = &tcs; \
scb = ascb->scb; \
scb->header.opcode = CLEAR_NEXUS
if (res) \
goto out_err; \
ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
- wait_for_completion(&ascb->completion); \
- res = (int) (unsigned long) ascb->uldd_task; \
+ wait_for_completion(&completion); \
+ res = tcs.dl_opcode; \
if (res == TC_NO_ERROR) \
res = TMF_RESP_FUNC_COMPLETE; \
+ return res; \
out_err: \
asd_ascb_free(ascb); \
return res
int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha)
{
struct asd_ha_struct *asd_ha = sas_ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_ADAPTER;
int asd_clear_nexus_port(struct asd_sas_port *port)
{
struct asd_ha_struct *asd_ha = port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_PORT;
CLEAR_NEXUS_POST;
}
-#if 0
-static int asd_clear_nexus_I_T(struct domain_device *dev)
+enum clear_nexus_phase {
+ NEXUS_PHASE_PRE,
+ NEXUS_PHASE_POST,
+ NEXUS_PHASE_RESUME,
+};
+
+static int asd_clear_nexus_I_T(struct domain_device *dev,
+ enum clear_nexus_phase phase)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_I_T;
- scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ switch (phase) {
+ case NEXUS_PHASE_PRE:
+ scb->clear_nexus.flags = EXEC_Q | SUSPEND_TX;
+ break;
+ case NEXUS_PHASE_POST:
+ scb->clear_nexus.flags = SEND_Q | NOTINQ;
+ break;
+ case NEXUS_PHASE_RESUME:
+ scb->clear_nexus.flags = RESUME_TX;
+ }
scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
dev->lldd_dev);
CLEAR_NEXUS_POST;
}
-#endif
+
+int asd_I_T_nexus_reset(struct domain_device *dev)
+{
+ int res, tmp_res, i;
+ struct sas_phy *phy = sas_find_local_phy(dev);
+ /* Standard mandates link reset for ATA (type 0) and
+ * hard reset for SSP (type 1) */
+ int reset_type = (dev->dev_type == SATA_DEV ||
+ (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+
+ asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE);
+ /* send a hard reset */
+ ASD_DPRINTK("sending %s reset to %s\n",
+ reset_type ? "hard" : "soft", phy->dev.bus_id);
+ res = sas_phy_reset(phy, reset_type);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ /* wait for the maximum settle time */
+ msleep(500);
+ /* clear all outstanding commands (keep nexus suspended) */
+ asd_clear_nexus_I_T(dev, NEXUS_PHASE_POST);
+ }
+ for (i = 0 ; i < 3; i++) {
+ tmp_res = asd_clear_nexus_I_T(dev, NEXUS_PHASE_RESUME);
+ if (tmp_res == TC_RESUME)
+ return res;
+ msleep(500);
+ }
+
+ /* This is a bit of a problem: the sequencer is still suspended
+ * and is refusing to resume. Hope it will resume on a bigger hammer
+ * or the disk is lost */
+ dev_printk(KERN_ERR, &phy->dev,
+ "Failed to resume nexus after reset 0x%x\n", tmp_res);
+
+ return TMF_RESP_FUNC_FAILED;
+}
static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_I_T_L;
{
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
struct asd_ascb *tascb = task->lldd_task;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_TAG;
{
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
struct asd_ascb *tascb = task->lldd_task;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_TRANS_CX;
static void asd_tmf_timedout(unsigned long data)
{
struct asd_ascb *ascb = (void *) data;
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("tmf timed out\n");
- asd_timedout_common(data);
- ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
- complete(&ascb->completion);
+ tcs->tmf_state = TMF_RESP_FUNC_FAILED;
+ complete(ascb->completion);
}
static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
static void asd_tmf_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
+ struct tasklet_completion_status *tcs;
+
if (!del_timer(&ascb->timer))
return;
+ tcs = ascb->uldd_task;
ASD_DPRINTK("tmf tasklet complete\n");
- if (dl->opcode == TC_SSP_RESP)
- ascb->uldd_task = (void *) (unsigned long)
- asd_get_tmf_resp_tasklet(ascb, dl);
- else
- ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode;
+ tcs->dl_opcode = dl->opcode;
+
+ if (dl->opcode == TC_SSP_RESP) {
+ tcs->tmf_state = asd_get_tmf_resp_tasklet(ascb, dl);
+ tcs->tag_valid = ascb->tag_valid;
+ tcs->tag = ascb->tag;
+ }
- complete(&ascb->completion);
+ complete(ascb->completion);
+ asd_ascb_free(ascb);
}
static inline int asd_clear_nexus(struct sas_task *task)
int res = TMF_RESP_FUNC_FAILED;
int leftover;
struct asd_ascb *tascb = task->lldd_task;
+ DECLARE_COMPLETION_ONSTACK(completion);
unsigned long flags;
+ tascb->completion = &completion;
+
ASD_DPRINTK("task not done, clearing nexus\n");
if (tascb->tag_valid)
res = asd_clear_nexus_tag(task);
else
res = asd_clear_nexus_index(task);
- leftover = wait_for_completion_timeout(&tascb->completion,
+ leftover = wait_for_completion_timeout(&completion,
AIC94XX_SCB_TIMEOUT);
+ tascb->completion = NULL;
ASD_DPRINTK("came back from clear nexus\n");
spin_lock_irqsave(&task->task_state_lock, flags);
if (leftover < 1)
struct asd_ascb *ascb = NULL;
struct scb *scb;
int leftover;
+ DECLARE_TCS(tcs);
+ DECLARE_COMPLETION_ONSTACK(completion);
+ DECLARE_COMPLETION_ONSTACK(tascb_completion);
+
+ tascb->completion = &tascb_completion;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
if (!ascb)
return -ENOMEM;
- scb = ascb->scb;
+ ascb->uldd_task = &tcs;
+ ascb->completion = &completion;
+ scb = ascb->scb;
scb->header.opcode = SCB_ABORT_TASK;
switch (task->task_proto) {
res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
asd_tmf_timedout);
if (res)
- goto out;
- wait_for_completion(&ascb->completion);
+ goto out_free;
+ wait_for_completion(&completion);
ASD_DPRINTK("tmf came back\n");
- res = (int) (unsigned long) ascb->uldd_task;
- tascb->tag = ascb->tag;
- tascb->tag_valid = ascb->tag_valid;
+ tascb->tag = tcs.tag;
+ tascb->tag_valid = tcs.tag_valid;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
- switch (res) {
- /* The task to be aborted has been sent to the device.
- * We got a Response IU for the ABORT TASK TMF. */
- case TC_NO_ERROR + 0xFF00:
- case TMF_RESP_FUNC_COMPLETE:
- case TMF_RESP_FUNC_FAILED:
- res = asd_clear_nexus(task);
- break;
- case TMF_RESP_INVALID_FRAME:
- case TMF_RESP_OVERLAPPED_TAG:
- case TMF_RESP_FUNC_ESUPP:
- case TMF_RESP_NO_LUN:
- goto out_done; break;
- }
- /* In the following we assume that the managing layer
- * will _never_ make a mistake, when issuing ABORT TASK.
- */
- switch (res) {
- default:
- res = asd_clear_nexus(task);
- /* fallthrough */
- case TC_NO_ERROR + 0xFF00:
- case TMF_RESP_FUNC_COMPLETE:
- break;
- /* The task hasn't been sent to the device xor we never got
- * a (sane) Response IU for the ABORT TASK TMF.
- */
- case TF_NAK_RECV + 0xFF00:
- res = TMF_RESP_INVALID_FRAME;
- break;
- case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */
+ if (tcs.dl_opcode == TC_SSP_RESP) {
+ /* The task to be aborted has been sent to the device.
+ * We got a Response IU for the ABORT TASK TMF. */
+ if (tcs.tmf_state == TMF_RESP_FUNC_COMPLETE)
+ res = asd_clear_nexus(task);
+ else
+ res = tcs.tmf_state;
+ } else if (tcs.dl_opcode == TC_NO_ERROR &&
+ tcs.tmf_state == TMF_RESP_FUNC_FAILED) {
+ /* timeout */
res = TMF_RESP_FUNC_FAILED;
- leftover = wait_for_completion_timeout(&tascb->completion,
- AIC94XX_SCB_TIMEOUT);
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (leftover < 1)
+ } else {
+ /* In the following we assume that the managing layer
+ * will _never_ make a mistake, when issuing ABORT
+ * TASK.
+ */
+ switch (tcs.dl_opcode) {
+ default:
+ res = asd_clear_nexus(task);
+ /* fallthrough */
+ case TC_NO_ERROR:
+ break;
+ /* The task hasn't been sent to the device xor
+ * we never got a (sane) Response IU for the
+ * ABORT TASK TMF.
+ */
+ case TF_NAK_RECV:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE: /* done but not reported yet */
res = TMF_RESP_FUNC_FAILED;
- if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ leftover =
+ wait_for_completion_timeout(&tascb_completion,
+ AIC94XX_SCB_TIMEOUT);
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (leftover < 1)
+ res = TMF_RESP_FUNC_FAILED;
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ break;
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE: /* no such device */
res = TMF_RESP_FUNC_COMPLETE;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- goto out_done;
- case TF_TMF_NO_TAG + 0xFF00:
- case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
- case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
- res = TMF_RESP_FUNC_COMPLETE;
- goto out_done;
- case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
- res = TMF_RESP_FUNC_ESUPP;
- goto out;
+ break;
+ case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ break;
+ }
}
-out_done:
+ out_done:
+ tascb->completion = NULL;
if (res == TMF_RESP_FUNC_COMPLETE) {
task->lldd_task = NULL;
mb();
asd_ascb_free(tascb);
}
-out:
+ ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
+ return res;
+
+ out_free:
asd_ascb_free(ascb);
ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
return res;
struct asd_ascb *ascb;
int res = 1;
struct scb *scb;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ DECLARE_TCS(tcs);
if (!(dev->tproto & SAS_PROTOCOL_SSP))
return TMF_RESP_FUNC_ESUPP;
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
if (!ascb)
return -ENOMEM;
+
+ ascb->completion = &completion;
+ ascb->uldd_task = &tcs;
scb = ascb->scb;
if (tmf == TMF_QUERY_TASK)
asd_tmf_timedout);
if (res)
goto out_err;
- wait_for_completion(&ascb->completion);
- res = (int) (unsigned long) ascb->uldd_task;
+ wait_for_completion(&completion);
- switch (res) {
- case TC_NO_ERROR + 0xFF00:
+ switch (tcs.dl_opcode) {
+ case TC_NO_ERROR:
res = TMF_RESP_FUNC_COMPLETE;
break;
- case TF_NAK_RECV + 0xFF00:
+ case TF_NAK_RECV:
res = TMF_RESP_INVALID_FRAME;
break;
- case TF_TMF_TASK_DONE + 0xFF00:
+ case TF_TMF_TASK_DONE:
res = TMF_RESP_FUNC_FAILED;
break;
- case TF_TMF_NO_TAG + 0xFF00:
- case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
- case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE: /* no such device */
res = TMF_RESP_FUNC_COMPLETE;
break;
- case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */
res = TMF_RESP_FUNC_ESUPP;
break;
default:
/* Allow TMF response codes to propagate upwards */
+ res = tcs.dl_opcode;
break;
}
+ return res;
out_err:
asd_ascb_free(ascb);
return res;
/*The limit of outstanding scsi command that firmware can handle*/
#define ARCMSR_MAX_OUTSTANDING_CMD 256
#define ARCMSR_MAX_FREECCB_NUM 320
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/12/24"
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2008/02/27"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
static void gdth_clear_events(void);
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count, int to_buffer);
+ char *buffer, ushort count);
static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp);
static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive);
unsigned int cmd, unsigned long arg);
static void gdth_flush(gdth_ha_str *ha);
-static int gdth_halt(struct notifier_block *nb, ulong event, void *buf);
static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
struct gdth_cmndinfo *cmndinfo);
#include "gdth_proc.h"
#include "gdth_proc.c"
-/* notifier block to get a notify on system shutdown/halt/reboot */
-static struct notifier_block gdth_notifier = {
- gdth_halt, NULL, 0
-};
-static int notifier_disabled = 0;
-
static gdth_ha_str *gdth_find_ha(int hanum)
{
gdth_ha_str *ha;
for (i=0; i<GDTH_MAXCMDS; ++i) {
if (ha->cmndinfo[i].index == 0) {
priv = &ha->cmndinfo[i];
- priv->index = i+1;
memset(priv, 0, sizeof(*priv));
+ priv->index = i+1;
break;
}
}
gdth_ha_str *ha = shost_priv(sdev->host);
Scsi_Cmnd *scp;
struct gdth_cmndinfo cmndinfo;
- struct scatterlist one_sg;
DECLARE_COMPLETION_ONSTACK(wait);
int rval;
/* use request field to save the ptr. to completion struct. */
scp->request = (struct request *)&wait;
scp->timeout_per_command = timeout*HZ;
- sg_init_one(&one_sg, gdtcmd, sizeof(*gdtcmd));
- gdth_set_sglist(scp, &one_sg);
- gdth_set_sg_count(scp, 1);
- gdth_set_bufflen(scp, sizeof(*gdtcmd));
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
cmndinfo.priority = IOCTL_PRI;
+ cmndinfo.internal_cmd_str = gdtcmd;
cmndinfo.internal_command = 1;
TRACE(("__gdth_execute() cmd 0x%x\n", scp->cmnd[0]));
* buffers, kmap_atomic() as needed.
*/
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count, int to_buffer)
+ char *buffer, ushort count)
{
ushort cpcount,i, max_sg = gdth_sg_count(scp);
ushort cpsum,cpnow;
}
local_irq_save(flags);
address = kmap_atomic(sg_page(sl), KM_BIO_SRC_IRQ) + sl->offset;
- if (to_buffer)
- memcpy(buffer, address, cpnow);
- else
- memcpy(address, buffer, cpnow);
+ memcpy(address, buffer, cpnow);
flush_dcache_page(sg_page(sl));
kunmap_atomic(address, KM_BIO_SRC_IRQ);
local_irq_restore(flags);
strcpy(inq.vendor,ha->oem_name);
sprintf(inq.product,"Host Drive #%02d",t);
strcpy(inq.revision," ");
- gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data));
break;
case REQUEST_SENSE:
sd.key = NO_SENSE;
sd.info = 0;
sd.add_length= 0;
- gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data));
break;
case MODE_SENSE:
mpd.bd.block_length[0] = (SECTOR_SIZE & 0x00ff0000) >> 16;
mpd.bd.block_length[1] = (SECTOR_SIZE & 0x0000ff00) >> 8;
mpd.bd.block_length[2] = (SECTOR_SIZE & 0x000000ff);
- gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data));
break;
case READ_CAPACITY:
else
rdc.last_block_no = cpu_to_be32(ha->hdr[t].size-1);
rdc.block_length = cpu_to_be32(SECTOR_SIZE);
- gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data));
break;
case SERVICE_ACTION_IN:
rdc16.last_block_no = cpu_to_be64(ha->hdr[t].size-1);
rdc16.block_length = cpu_to_be32(SECTOR_SIZE);
gdth_copy_internal_data(ha, scp, (char*)&rdc16,
- sizeof(gdth_rdcap16_data), 0);
+ sizeof(gdth_rdcap16_data));
} else {
scp->result = DID_ABORT << 16;
}
static int gdth_special_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp)
{
register gdth_cmd_str *cmdp;
+ struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
int cmd_index;
cmdp= ha->pccb;
if (ha->type==GDT_EISA && ha->cmd_cnt>0)
return 0;
- gdth_copy_internal_data(ha, scp, (char *)cmdp, sizeof(gdth_cmd_str), 1);
+ *cmdp = *cmndinfo->internal_cmd_str;
cmdp->RequestBuffer = scp;
/* search free command index */
gdth_ha_str *ha;
ulong flags;
+ BUG_ON(list_empty(&gdth_instances));
+
ha = list_first_entry(&gdth_instances, gdth_ha_str, list);
spin_lock_irqsave(&ha->smp_lock, flags);
}
}
-/* shutdown routine */
-static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
-{
- gdth_ha_str *ha;
-#ifndef __alpha__
- gdth_cmd_str gdtcmd;
- char cmnd[MAX_COMMAND_SIZE];
-#endif
-
- if (notifier_disabled)
- return NOTIFY_OK;
-
- TRACE2(("gdth_halt() event %d\n",(int)event));
- if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
- return NOTIFY_DONE;
-
- notifier_disabled = 1;
- printk("GDT-HA: Flushing all host drives .. ");
- list_for_each_entry(ha, &gdth_instances, list) {
- gdth_flush(ha);
-
-#ifndef __alpha__
- /* controller reset */
- memset(cmnd, 0xff, MAX_COMMAND_SIZE);
- gdtcmd.BoardNode = LOCALBOARD;
- gdtcmd.Service = CACHESERVICE;
- gdtcmd.OpCode = GDT_RESET;
- TRACE2(("gdth_halt(): reset controller %d\n", ha->hanum));
- gdth_execute(ha->shost, &gdtcmd, cmnd, 10, NULL);
-#endif
- }
- printk("Done.\n");
-
-#ifdef GDTH_STATISTICS
- del_timer(&gdth_timer);
-#endif
- return NOTIFY_OK;
-}
-
/* configure lun */
static int gdth_slave_configure(struct scsi_device *sdev)
{
scsi_remove_host(shp);
+ gdth_flush(ha);
+
if (ha->sdev) {
scsi_free_host_dev(ha->sdev);
ha->sdev = NULL;
}
- gdth_flush(ha);
-
if (shp->irq)
free_irq(shp->irq,ha);
scsi_host_put(shp);
}
+static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
+{
+ gdth_ha_str *ha;
+
+ TRACE2(("gdth_halt() event %d\n", (int)event));
+ if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
+ return NOTIFY_DONE;
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_flush(ha);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gdth_notifier = {
+ gdth_halt, NULL, 0
+};
+
static int __init gdth_init(void)
{
if (disable) {
add_timer(&gdth_timer);
#endif
major = register_chrdev(0,"gdth", &gdth_fops);
- notifier_disabled = 0;
register_reboot_notifier(&gdth_notifier);
gdth_polling = FALSE;
return 0;
{
gdth_ha_str *ha;
- list_for_each_entry(ha, &gdth_instances, list)
- gdth_remove_one(ha);
+ unregister_chrdev(major, "gdth");
+ unregister_reboot_notifier(&gdth_notifier);
#ifdef GDTH_STATISTICS
- del_timer(&gdth_timer);
+ del_timer_sync(&gdth_timer);
#endif
- unregister_chrdev(major,"gdth");
- unregister_reboot_notifier(&gdth_notifier);
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_remove_one(ha);
}
module_init(gdth_init);
struct gdth_cmndinfo { /* per-command private info */
int index;
int internal_command; /* don't call scsi_done */
+ gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/
dma_addr_t sense_paddr; /* sense dma-addr */
unchar priority;
int timeout;
int err = 0;
dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0],
- cmd->usg_sg);
+ scsi_sg_count(sc));
if (scsi_sg_count(sc))
err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
if (!shost)
goto free_vport;
shost->transportt = ibmvstgt_transport_template;
- err = scsi_tgt_alloc_queue(shost);
- if (err)
- goto put_host;
target = host_to_srp_target(shost);
target->shost = shost;
if (err)
goto destroy_queue;
+ err = scsi_tgt_alloc_queue(shost);
+ if (err)
+ goto destroy_queue;
+
return 0;
destroy_queue:
crq_queue_destroy(target);
qdepth = ISCSI_DEF_CMD_PER_LUN;
}
- if (!is_power_of_2(cmds_max) ||
- cmds_max >= ISCSI_MGMT_ITT_OFFSET) {
+ if (!is_power_of_2(cmds_max) || cmds_max >= ISCSI_MGMT_ITT_OFFSET ||
+ cmds_max < 2) {
if (cmds_max != 0)
printk(KERN_ERR "iscsi: invalid can_queue of %d. "
"can_queue must be a power of 2 and between "
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
- int res = 0;
+ int res = TMF_RESP_FUNC_FAILED;
if (i->dft->lldd_I_T_nexus_reset)
res = i->dft->lldd_I_T_nexus_reset(dev);
- if (res)
+ if (res != TMF_RESP_FUNC_COMPLETE)
SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
switch (dev->sata_dev.command_set) {
return res;
}
-static void sas_sata_propagate_sas_addr(struct domain_device *dev)
-{
- unsigned long flags;
- struct asd_sas_port *port = dev->port;
- struct asd_sas_phy *phy;
-
- BUG_ON(dev->parent);
-
- memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
- spin_lock_irqsave(&port->phy_list_lock, flags);
- list_for_each_entry(phy, &port->phy_list, port_phy_el)
- memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
- spin_unlock_irqrestore(&port->phy_list_lock, flags);
-}
-
#define ATA_IDENTIFY_DEV 0xEC
#define ATA_IDENTIFY_PACKET_DEV 0xA1
#define ATA_SET_FEATURES 0xEF
goto out_err;
}
cont1:
- /* Get WWN */
- if (dev->port->oob_mode != SATA_OOB_MODE) {
- memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
- SAS_ADDR_SIZE);
- } else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
- (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
- == 0x5000) {
- int i;
-
- for (i = 0; i < 4; i++) {
- dev->sas_addr[2*i] =
- (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
- dev->sas_addr[2*i+1] =
- le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
- }
- }
- sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
- if (!dev->parent)
- sas_sata_propagate_sas_addr(dev);
-
/* XXX Hint: register this SATA device with SATL.
When this returns, dev->sata_dev->lu is alive and
present.
if (!port->phy)
port->phy = phy->phy;
- SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
- port->id, port->phy_mask);
-
if (*(u64 *)port->attached_sas_addr == 0) {
port->class = phy->class;
memcpy(port->attached_sas_addr, phy->attached_sas_addr,
}
sas_port_add_phy(port->port, phy->phy);
+ SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
+ phy->phy->dev.bus_id,port->port->dev.bus_id,
+ port->phy_mask,
+ SAS_ADDR(port->attached_sas_addr));
+
if (port->port_dev)
port->port_dev->pathways = port->num_phys;
static void sas_init_port(struct asd_sas_port *port,
struct sas_ha_struct *sas_ha, int i)
{
+ memset(port, 0, sizeof(*port));
port->id = i;
INIT_LIST_HEAD(&port->dev_list);
spin_lock_init(&port->phy_list_lock);
INIT_LIST_HEAD(&port->phy_list);
- port->num_phys = 0;
- port->phy_mask = 0;
port->ha = sas_ha;
spin_lock_init(&port->dev_list_lock);
}
/* Find the sas_phy that's attached to this device */
-static struct sas_phy *find_local_sas_phy(struct domain_device *dev)
+struct sas_phy *sas_find_local_phy(struct domain_device *dev)
{
struct domain_device *pdev = dev->parent;
struct ex_phy *exphy = NULL;
BUG_ON(!exphy);
return exphy->phy;
}
+EXPORT_SYMBOL_GPL(sas_find_local_phy);
/* Attempt to send a LUN reset message to a device */
int sas_eh_device_reset_handler(struct scsi_cmnd *cmd)
int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd)
{
struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_phy *phy = find_local_sas_phy(dev);
+ struct sas_phy *phy = sas_find_local_phy(dev);
int res;
res = sas_phy_reset(phy, 1);
}
/* Try to reset a device */
-static int try_to_reset_cmd_device(struct Scsi_Host *shost,
- struct scsi_cmnd *cmd)
+static int try_to_reset_cmd_device(struct scsi_cmnd *cmd)
{
int res;
+ struct Scsi_Host *shost = cmd->device->host;
if (!shost->hostt->eh_device_reset_handler)
goto try_bus_reset;
need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (need_reset) {
+ SAS_DPRINTK("%s: task 0x%p requests reset\n",
+ __FUNCTION__, task);
+ goto reset;
+ }
+
SAS_DPRINTK("trying to find task 0x%p\n", task);
res = sas_scsi_find_task(task);
SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
task);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_ABORTED:
SAS_DPRINTK("%s: task 0x%p is aborted\n",
__FUNCTION__, task);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_AT_LU:
SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ reset:
tmf_resp = sas_recover_lu(task->dev, cmd);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
SAS_DPRINTK("dev %016llx LU %x is "
SAS_ADDR(task->dev),
cmd->device->lun);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
sas_scsi_clear_queue_lu(work_q, cmd);
goto Again;
}
task);
tmf_resp = sas_recover_I_T(task->dev);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ struct domain_device *dev = task->dev;
SAS_DPRINTK("I_T %016llx recovered\n",
SAS_ADDR(task->dev->sas_addr));
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
- sas_scsi_clear_queue_I_T(work_q, task->dev);
+ sas_scsi_clear_queue_I_T(work_q, dev);
goto Again;
}
/* Hammer time :-) */
+ try_to_reset_cmd_device(cmd);
if (i->dft->lldd_clear_nexus_port) {
struct asd_sas_port *port = task->dev->port;
SAS_DPRINTK("clearing nexus for port:%d\n",
SAS_DPRINTK("clear nexus port:%d "
"succeeded\n", port->id);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
sas_scsi_clear_queue_port(work_q,
port);
goto Again;
SAS_DPRINTK("clear nexus ha "
"succeeded\n");
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
goto clear_q;
}
}
cmd->device->lun);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
goto clear_q;
}
}
#include <asm/io.h>
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.5.1"
#define _MV_DUMP 0
#define MVS_DISABLE_NVRAM
#define MVS_DISABLE_MSI
return rc;
#else
/* FIXME , For SAS target mode */
- memcpy(buf, "\x00\x00\xab\x11\x30\x04\x05\x50", 8);
+ memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
return 0;
#endif
}
mvs_hba_cq_dump(mvi);
- if (unlikely(rx_desc & RXQ_DONE))
+ if (likely(rx_desc & RXQ_DONE))
mvs_slot_complete(mvi, rx_desc);
if (rx_desc & RXQ_ATTN) {
attn = true;
msleep(100);
/* init and reset phys */
for (i = 0; i < mvi->chip->n_phy; i++) {
- /* FIXME: is this the correct dword order? */
- u32 lo = *((u32 *)&mvi->sas_addr[0]);
- u32 hi = *((u32 *)&mvi->sas_addr[4]);
+ u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
+ u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
mvs_detect_porttype(mvi, i);
}
req_len += sgpnt->length;
}
- scsi_set_resid(cmd, req_len - act_len);
+ scsi_set_resid(cmd, buflen - act_len);
return 0;
}
.cmd_per_lun = 1,
.emulated = 1, /* only sg driver uses this */
.max_sectors = PS3ROM_MAX_SECTORS,
- .use_clustering = ENABLE_CLUSTERING,
+ .use_clustering = DISABLE_CLUSTERING,
.module = THIS_MODULE,
};
ms_pkt->entry_count = 1;
SET_TARGET_ID(ha, ms_pkt->loop_id, SIMPLE_NAME_SERVER);
ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG);
- ms_pkt->timeout = __constant_cpu_to_le16(25);
+ ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ms_pkt->total_dsd_count = __constant_cpu_to_le16(2);
ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = __constant_cpu_to_le16(NPH_SNS);
- ct_pkt->timeout = __constant_cpu_to_le16(25);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ms_pkt->entry_count = 1;
SET_TARGET_ID(ha, ms_pkt->loop_id, ha->mgmt_svr_loop_id);
ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG);
- ms_pkt->timeout = __constant_cpu_to_le16(59);
+ ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ms_pkt->total_dsd_count = __constant_cpu_to_le16(2);
ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
- ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
- ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ha->login_timeout = nv->login_timeout;
icb->login_timeout = nv->login_timeout;
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
ha->login_timeout = le16_to_cpu(nv->login_timeout);
icb->login_timeout = cpu_to_le16(nv->login_timeout);
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
return;
ret = qla2x00_stop_firmware(ha);
- for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {
+ for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
+ retries ; retries--) {
qla2x00_reset_chip(ha);
if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
continue;
}
}
+ /* Check for overrun. */
+ if (IS_FWI2_CAPABLE(ha) && comp_status == CS_COMPLETE &&
+ scsi_status & SS_RESIDUAL_OVER)
+ comp_status = CS_DATA_OVERRUN;
+
/*
* Based on Host and scsi status generate status code for Linux
*/
tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
tsk->p.tsk.entry_count = 1;
tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
- tsk->p.tsk.timeout = __constant_cpu_to_le16(25);
+ tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
tsk->p.tsk.control_flags = __constant_cpu_to_le32(TCF_TARGET_RESET);
tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa;
tsk->p.tsk.port_id[1] = fcport->d_id.b.area;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.00-k8"
+#define QLA2XXX_VERSION "8.02.00-k9"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
ddb_entry->fw_ddb_device_state = state;
/* Device is back online. */
if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
+ atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
atomic_set(&ddb_entry->port_down_timer,
ha->port_down_retry_count);
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
atomic_set(&ddb_entry->relogin_retry_count, 0);
atomic_set(&ddb_entry->relogin_timer, 0);
clear_bit(DF_RELOGIN, &ddb_entry->flags);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
+static void qla4xxx_scan_start(struct Scsi_Host *shost);
static struct scsi_host_template qla4xxx_driver_template = {
.module = THIS_MODULE,
.slave_destroy = qla4xxx_slave_destroy,
.scan_finished = iscsi_scan_finished,
+ .scan_start = qla4xxx_scan_start,
.this_id = -1,
.cmd_per_lun = 3,
return ddb_entry;
}
+static void qla4xxx_scan_start(struct Scsi_Host *shost)
+{
+ struct scsi_qla_host *ha = shost_priv(shost);
+ struct ddb_entry *ddb_entry, *ddbtemp;
+
+ /* finish setup of sessions that were already setup in firmware */
+ list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
+ qla4xxx_add_sess(ddb_entry);
+ }
+}
+
/*
* Timer routines
*/
* qla4xxx_recover_adapter - recovers adapter after a fatal error
* @ha: Pointer to host adapter structure.
* @renew_ddb_list: Indicates what to do with the adapter's ddb list
- * after adapter recovery has completed.
- * 0=preserve ddb list, 1=destroy and rebuild ddb list
+ *
+ * renew_ddb_list value can be 0=preserve ddb list, 1=destroy and rebuild
+ * ddb list.
**/
static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
uint8_t renew_ddb_list)
/* Stall incoming I/O until we are done */
clear_bit(AF_ONLINE, &ha->flags);
+
DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no,
__func__));
int ret = -ENODEV, status;
struct Scsi_Host *host;
struct scsi_qla_host *ha;
- struct ddb_entry *ddb_entry, *ddbtemp;
uint8_t init_retry_count = 0;
char buf[34];
if (ret)
goto probe_failed;
- /* Update transport device information for all devices. */
- list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
- if (qla4xxx_add_sess(ddb_entry))
- goto remove_host;
- }
-
printk(KERN_INFO
" QLogic iSCSI HBA Driver version: %s\n"
" QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
scsi_scan_host(host);
return 0;
-remove_host:
- qla4xxx_free_ddb_list(ha);
- scsi_remove_host(host);
-
probe_failed:
qla4xxx_free_adapter(ha);
scsi_host_put(ha->host);
return FAILED;
}
- if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) {
+ /* make sure the dpc thread is stopped while we reset the hba */
+ clear_bit(AF_ONLINE, &ha->flags);
+ flush_workqueue(ha->dpc_thread);
+
+ if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS)
return_status = SUCCESS;
- }
dev_info(&ha->pdev->dev, "HOST RESET %s.\n",
return_status == FAILED ? "FAILED" : "SUCCEDED");
"Notifying upper driver of completion "
"(result %x)\n", cmd->result));
- good_bytes = scsi_bufflen(cmd);
+ good_bytes = scsi_bufflen(cmd) + cmd->request->extra_len;
if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
drv = scsi_cmd_to_driver(cmd);
if (drv->done)
}
/**
- * scsi_scan_target - scan a target id, possibly including all LUNs on the
- * target.
+ * scsi_scan_target - scan a target id, possibly including all LUNs on the target.
* @parent: host to scan
* @channel: channel to scan
* @id: target id to scan
if (!cmd)
goto release_rq;
- memset(cmd, 0, sizeof(*cmd));
cmd->sc_data_direction = data_dir;
cmd->jiffies_at_alloc = jiffies;
cmd->request = rq;
scsi_release_buffers(cmd);
goto unmap_rq;
}
+ /*
+ * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
+ * length for us.
+ */
+ cmd->sdb.length = rq->data_len;
return 0;
#define ISCSI_SESSION_ATTRS 19
#define ISCSI_CONN_ATTRS 13
#define ISCSI_HOST_ATTRS 4
-#define ISCSI_TRANSPORT_VERSION "2.0-868"
+#define ISCSI_TRANSPORT_VERSION "2.0-869"
struct iscsi_internal {
int daemon_pid;
scsi_target_unblock(&session->dev);
}
-static void __iscsi_unblock_session(struct iscsi_cls_session *session)
-{
- if (!cancel_delayed_work(&session->recovery_work))
- flush_workqueue(iscsi_eh_timer_workq);
- scsi_target_unblock(&session->dev);
-}
-
-void iscsi_unblock_session(struct iscsi_cls_session *session)
+static void __iscsi_unblock_session(struct work_struct *work)
{
+ struct iscsi_cls_session *session =
+ container_of(work, struct iscsi_cls_session,
+ unblock_work);
struct Scsi_Host *shost = iscsi_session_to_shost(session);
struct iscsi_host *ihost = shost->shost_data;
unsigned long flags;
+ /*
+ * The recovery and unblock work get run from the same workqueue,
+ * so try to cancel it if it was going to run after this unblock.
+ */
+ cancel_delayed_work(&session->recovery_work);
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_LOGGED_IN;
spin_unlock_irqrestore(&session->lock, flags);
-
- __iscsi_unblock_session(session);
+ /* start IO */
+ scsi_target_unblock(&session->dev);
/*
* Only do kernel scanning if the driver is properly hooked into
* the async scanning code (drivers like iscsi_tcp do login and
atomic_inc(&ihost->nr_scans);
}
}
+
+/**
+ * iscsi_unblock_session - set a session as logged in and start IO.
+ * @session: iscsi session
+ *
+ * Mark a session as ready to accept IO.
+ */
+void iscsi_unblock_session(struct iscsi_cls_session *session)
+{
+ queue_work(iscsi_eh_timer_workq, &session->unblock_work);
+ /*
+ * make sure all the events have completed before tell the driver
+ * it is safe
+ */
+ flush_workqueue(iscsi_eh_timer_workq);
+}
EXPORT_SYMBOL_GPL(iscsi_unblock_session);
-void iscsi_block_session(struct iscsi_cls_session *session)
+static void __iscsi_block_session(struct work_struct *work)
{
+ struct iscsi_cls_session *session =
+ container_of(work, struct iscsi_cls_session,
+ block_work);
unsigned long flags;
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_FAILED;
spin_unlock_irqrestore(&session->lock, flags);
-
scsi_target_block(&session->dev);
queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work,
session->recovery_tmo * HZ);
}
+
+void iscsi_block_session(struct iscsi_cls_session *session)
+{
+ queue_work(iscsi_eh_timer_workq, &session->block_work);
+}
EXPORT_SYMBOL_GPL(iscsi_block_session);
static void __iscsi_unbind_session(struct work_struct *work)
INIT_DELAYED_WORK(&session->recovery_work, session_recovery_timedout);
INIT_LIST_HEAD(&session->host_list);
INIT_LIST_HEAD(&session->sess_list);
+ INIT_WORK(&session->unblock_work, __iscsi_unblock_session);
+ INIT_WORK(&session->block_work, __iscsi_block_session);
INIT_WORK(&session->unbind_work, __iscsi_unbind_session);
INIT_WORK(&session->scan_work, iscsi_scan_session);
spin_lock_init(&session->lock);
list_del(&session->sess_list);
spin_unlock_irqrestore(&sesslock, flags);
+ /* make sure there are no blocks/unblocks queued */
+ flush_workqueue(iscsi_eh_timer_workq);
+ /* make sure the timedout callout is not running */
+ if (!cancel_delayed_work(&session->recovery_work))
+ flush_workqueue(iscsi_eh_timer_workq);
/*
* If we are blocked let commands flow again. The lld or iscsi
* layer should set up the queuecommand to fail commands.
+ * We assume that LLD will not be calling block/unblock while
+ * removing the session.
*/
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_FREE;
spin_unlock_irqrestore(&session->lock, flags);
- __iscsi_unblock_session(session);
- __iscsi_unbind_session(&session->unbind_work);
- /* flush running scans */
+ scsi_target_unblock(&session->dev);
+ /* flush running scans then delete devices */
flush_workqueue(ihost->scan_workq);
- /*
- * If the session dropped while removing devices then we need to make
- * sure it is not blocked
- */
- if (!cancel_delayed_work(&session->recovery_work))
- flush_workqueue(iscsi_eh_timer_workq);
+ __iscsi_unbind_session(&session->unbind_work);
/* hw iscsi may not have removed all connections from session */
err = device_for_each_child(&session->dev, NULL,
void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
{
- struct iscsi_cls_session *session = iscsi_conn_to_session(conn);
struct nlmsghdr *nlh;
struct sk_buff *skb;
struct iscsi_uevent *ev;
struct iscsi_internal *priv;
int len = NLMSG_SPACE(sizeof(*ev));
- unsigned long flags;
priv = iscsi_if_transport_lookup(conn->transport);
if (!priv)
return;
- spin_lock_irqsave(&session->lock, flags);
- if (session->state == ISCSI_SESSION_LOGGED_IN)
- session->state = ISCSI_SESSION_FAILED;
- spin_unlock_irqrestore(&session->lock, flags);
-
skb = alloc_skb(len, GFP_ATOMIC);
if (!skb) {
iscsi_cls_conn_printk(KERN_ERR, conn, "gracefully ignored "
/* Archtek America Corp. */
/* Archtek SmartLink Modem 3334BT Plug & Play */
{ "GVC000F", 0 },
+ /* Archtek SmartLink Modem 3334BRV 33.6K Data Fax Voice */
+ { "GVC0303", 0 },
/* Hayes */
/* Hayes Optima 288 V.34-V.FC + FAX + Voice Plug & Play */
{ "HAY0001", 0 },
up->port.icount.tx++;
if (uart_circ_empty(xmit))
break;
- while (!serial_in(up, UART_LSR) & UART_LSR_THRE);
+ while (!(serial_in(up, UART_LSR) & UART_LSR_THRE));
} while (--count > 0);
/* driver internal data */
struct mpc52xx_psc __iomem *psc;
+ struct mpc52xx_psc_fifo __iomem *fifo;
unsigned int irq;
u8 bits_per_word;
u8 busy;
{
struct mpc52xx_psc_spi *mps = spi_master_get_devdata(spi->master);
struct mpc52xx_psc __iomem *psc = mps->psc;
+ struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
unsigned rb = 0; /* number of bytes receieved */
unsigned sb = 0; /* number of bytes sent */
unsigned char *rx_buf = (unsigned char *)t->rx_buf;
out_8(&psc->mode, 0);
} else {
out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
- out_be16(&psc->rfalarm, rfalarm);
+ out_be16(&fifo->rfalarm, rfalarm);
}
out_be16(&psc->mpc52xx_psc_imr, MPC52xx_PSC_IMR_RXRDY);
wait_for_completion(&mps->done);
- recv_at_once = in_be16(&psc->rfnum);
+ recv_at_once = in_be16(&fifo->rfnum);
dev_dbg(&spi->dev, "%d bytes received\n", recv_at_once);
send_at_once = recv_at_once;
static int mpc52xx_psc_spi_port_config(int psc_id, struct mpc52xx_psc_spi *mps)
{
struct mpc52xx_psc __iomem *psc = mps->psc;
+ struct mpc52xx_psc_fifo __iomem *fifo = mps->fifo;
u32 mclken_div;
int ret = 0;
/* Disable interrupts, interrupts are based on alarm level */
out_be16(&psc->mpc52xx_psc_imr, 0);
out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
- out_8(&psc->rfcntl, 0);
+ out_8(&fifo->rfcntl, 0);
out_8(&psc->mode, MPC52xx_PSC_MODE_FFULL);
/* Configure 8bit codec mode as a SPI master and use EOF flags */
ret = -EFAULT;
goto free_master;
}
+ /* On the 5200, fifo regs are immediately ajacent to the psc regs */
+ mps->fifo = ((void __iomem *)mps->psc) + sizeof(struct mpc52xx_psc);
ret = request_irq(mps->irq, mpc52xx_psc_spi_isr, 0, "mpc52xx-psc-spi",
mps);
/* Enable PCI bridge bus mastering and memory space */
pci_set_master(dev);
- pcibios_enable_device(dev, ~0);
+ if (pcibios_enable_device(dev, ~0) < 0) {
+ ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n");
+ return;
+ }
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
If you are unsure about this, say N here.
config USB_SUSPEND
- bool "USB selective suspend/resume and wakeup (EXPERIMENTAL)"
- depends on USB && PM && EXPERIMENTAL
+ bool "USB selective suspend/resume and wakeup"
+ depends on USB && PM
help
If you say Y here, you can use driver calls or the sysfs
- "power/state" file to suspend or resume individual USB
- peripherals.
+ "power/level" file to suspend or resume individual USB
+ peripherals and to enable or disable autosuspend (see
+ Documentation/usb/power-management.txt for more details).
Also, USB "remote wakeup" signaling is supported, whereby some
USB devices (like keyboards and network adapters) can wake up
* devices is broken...
*/
static const struct usb_device_id usb_quirk_list[] = {
- /* Action Semiconductor flash disk */
- { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255},
-
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* HP 5300/5370C scanner */
- { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 },
+ { USB_DEVICE(0x03f0, 0x0701), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Philips PSC805 audio device */
+ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
- /* INTEL VALUE SSD */
- { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
-
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
- /* Philips PSC805 audio device */
- { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Action Semiconductor flash disk */
+ { USB_DEVICE(0x10d6, 0x2200), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* INTEL VALUE SSD */
+ { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
+
{ } /* terminating entry must be last */
};
EXPORT_SYMBOL_GPL(usb_ifnum_to_if);
/**
- * usb_altnum_to_altsetting - get the altsetting structure with a given
- * alternate setting number.
+ * usb_altnum_to_altsetting - get the altsetting structure with a given alternate setting number.
* @intf: the interface containing the altsetting in question
* @altnum: the desired alternate setting number
*
* singlethreaded. Its job doesn't justify running on more
* than one CPU.
*/
- ksuspend_usb_wq = create_singlethread_workqueue("ksuspend_usbd");
+ ksuspend_usb_wq = create_freezeable_workqueue("ksuspend_usbd");
if (!ksuspend_usb_wq)
return -ENOMEM;
return 0;
*/
/**
- * usb_lock_device_for_reset - cautiously acquire the lock for a
- * usb device structure
+ * usb_lock_device_for_reset - cautiously acquire the lock for a usb device structure
* @udev: device that's being locked
* @iface: interface bound to the driver making the request (optional)
*
u8 *current_rx_buf;
u8 printer_status;
u8 reset_printer;
- struct class_device *printer_class_dev;
struct cdev printer_cdev;
struct device *pdev;
u8 printer_cdev_open;
#error "Can't configure both IXP and PXA"
#endif
+/* IXP doesn't yet support <linux/clk.h> */
+#define clk_get(dev,name) NULL
+#define clk_enable(clk) do { } while (0)
+#define clk_disable(clk) do { } while (0)
+#define clk_put(clk) do { } while (0)
+
#endif
#include "pxa2xx_udc.h"
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
* in active use.
*/
-static int pullup(struct pxa2xx_udc *udc, int is_active)
+static int pullup(struct pxa2xx_udc *udc)
{
- is_active = is_active && udc->vbus && udc->pullup;
+ int is_active = udc->vbus && udc->pullup && !udc->suspended;
DMSG("%s\n", is_active ? "active" : "inactive");
- if (is_active)
- udc_enable(udc);
- else {
- if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
- DMSG("disconnect %s\n", udc->driver
- ? udc->driver->driver.name
- : "(no driver)");
- stop_activity(udc, udc->driver);
+ if (is_active) {
+ if (!udc->active) {
+ udc->active = 1;
+ /* Enable clock for USB device */
+ clk_enable(udc->clk);
+ udc_enable(udc);
}
- udc_disable(udc);
+ } else {
+ if (udc->active) {
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN) {
+ DMSG("disconnect %s\n", udc->driver
+ ? udc->driver->driver.name
+ : "(no driver)");
+ stop_activity(udc, udc->driver);
+ }
+ udc_disable(udc);
+ /* Disable clock for USB device */
+ clk_disable(udc->clk);
+ udc->active = 0;
+ }
+
}
return 0;
}
struct pxa2xx_udc *udc;
udc = container_of(_gadget, struct pxa2xx_udc, gadget);
- udc->vbus = is_active = (is_active != 0);
+ udc->vbus = (is_active != 0);
DMSG("vbus %s\n", is_active ? "supplied" : "inactive");
- pullup(udc, is_active);
+ pullup(udc);
return 0;
}
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
return -EOPNOTSUPP;
- is_active = (is_active != 0);
- udc->pullup = is_active;
- pullup(udc, is_active);
+ udc->pullup = (is_active != 0);
+ pullup(udc);
return 0;
}
#ifdef CONFIG_USB_GADGET_DEBUG_FS
static int
-udc_seq_show(struct seq_file *m, void *d)
+udc_seq_show(struct seq_file *m, void *_d)
{
struct pxa2xx_udc *dev = m->private;
unsigned long flags;
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Disable clock for USB device */
- clk_disable(dev->clk);
-#endif
-
ep0_idle (dev);
dev->gadget.speed = USB_SPEED_UNKNOWN;
}
{
udc_clear_mask_UDCCR(UDCCR_UDE);
-#ifdef CONFIG_ARCH_PXA
- /* Enable clock for USB device */
- clk_enable(dev->clk);
-#endif
-
/* try to clear these bits before we enable the udc */
udc_ack_int_UDCCR(UDCCR_SUSIR|/*UDCCR_RSTIR|*/UDCCR_RESIR);
* for set_configuration as well as eventual disconnect.
*/
DMSG("registered gadget driver '%s'\n", driver->driver.name);
- pullup(dev, 1);
+ pullup(dev);
dump_state(dev);
return 0;
}
return -EINVAL;
local_irq_disable();
- pullup(dev, 0);
+ dev->pullup = 0;
+ pullup(dev);
stop_activity(dev, driver);
local_irq_enable();
if (irq < 0)
return -ENODEV;
-#ifdef CONFIG_ARCH_PXA
dev->clk = clk_get(&pdev->dev, "UDCCLK");
if (IS_ERR(dev->clk)) {
retval = PTR_ERR(dev->clk);
goto err_clk;
}
-#endif
pr_debug("%s: IRQ %d%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
if (dev->mach->gpio_vbus)
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
err_clk:
-#endif
return retval;
}
if (dev->driver)
return -EBUSY;
- udc_disable(dev);
+ dev->pullup = 0;
+ pullup(dev);
+
remove_debug_files(dev);
if (dev->got_irq) {
if (dev->mach->gpio_pullup)
gpio_free(dev->mach->gpio_pullup);
-#ifdef CONFIG_ARCH_PXA
clk_put(dev->clk);
-#endif
platform_set_drvdata(pdev, NULL);
the_controller = NULL;
static int pxa2xx_udc_suspend(struct platform_device *dev, pm_message_t state)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
WARN("USB host won't detect disconnect!\n");
- pullup(udc, 0);
+ udc->suspended = 1;
+
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
static int pxa2xx_udc_resume(struct platform_device *dev)
{
struct pxa2xx_udc *udc = platform_get_drvdata(dev);
+ unsigned long flags;
- pullup(udc, 1);
+ udc->suspended = 0;
+ local_irq_save(flags);
+ pullup(udc);
+ local_irq_restore(flags);
return 0;
}
has_cfr : 1,
req_pending : 1,
req_std : 1,
- req_config : 1;
+ req_config : 1,
+ suspended : 1,
+ active : 1;
#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
struct timer_list timer;
if (likely (last->urb != urb)) {
ehci_urb_done(ehci, last->urb, last_status);
count++;
+ last_status = -EINPROGRESS;
}
ehci_qtd_free (ehci, last);
last = NULL;
- last_status = -EINPROGRESS;
}
/* ignore urbs submitted during completions we reported */
buf[0] = 0;
for (i = 0; i < ports; i++) {
- u32 status = isp116x->rhport[i] =
- isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
+ u32 status = isp116x_read_reg32(isp116x, i ? HCRHPORT2 : HCRHPORT1);
if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
| RH_PS_OCIC | RH_PS_PRSC)) {
DBG("GetPortStatus\n");
if (!wIndex || wIndex > ports)
goto error;
- tmp = isp116x->rhport[--wIndex];
+ spin_lock_irqsave(&isp116x->lock, flags);
+ tmp = isp116x_read_reg32(isp116x, (--wIndex) ? HCRHPORT2 : HCRHPORT1);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
*(__le32 *) buf = cpu_to_le32(tmp);
DBG("GetPortStatus: port[%d] %08x\n", wIndex + 1, tmp);
break;
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, tmp);
- isp116x->rhport[wIndex] =
- isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case SetPortFeature:
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, RH_PS_PSS);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case USB_PORT_FEAT_POWER:
DBG("USB_PORT_FEAT_POWER\n");
spin_lock_irqsave(&isp116x->lock, flags);
isp116x_write_reg32(isp116x, wIndex
? HCRHPORT2 : HCRHPORT1, RH_PS_PPS);
+ spin_unlock_irqrestore(&isp116x->lock, flags);
break;
case USB_PORT_FEAT_RESET:
DBG("USB_PORT_FEAT_RESET\n");
root_port_reset(isp116x, wIndex);
- spin_lock_irqsave(&isp116x->lock, flags);
break;
default:
goto error;
}
- isp116x->rhport[wIndex] =
- isp116x_read_reg32(isp116x, wIndex ? HCRHPORT2 : HCRHPORT1);
- spin_unlock_irqrestore(&isp116x->lock, flags);
break;
default:
u32 rhdesca;
u32 rhdescb;
u32 rhstatus;
- u32 rhport[2];
/* async schedule: control, bulk */
struct list_head async;
};
static int ftdi_jtag_probe (struct usb_serial *serial);
+static int ftdi_mtxorb_hack_setup (struct usb_serial *serial);
static void ftdi_USB_UIRT_setup (struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv);
.probe = ftdi_jtag_probe,
};
+static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
+ .probe = ftdi_mtxorb_hack_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
return 0;
}
+/*
+ * The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
+ * We have to correct it if we want to read from it.
+ */
+static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
+{
+ struct usb_host_endpoint *ep = serial->dev->ep_in[1];
+ struct usb_endpoint_descriptor *ep_desc = &ep->desc;
+
+ if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
+ ep_desc->wMaxPacketSize = 0x40;
+ info("Fixing invalid wMaxPacketSize on read pipe");
+ }
+
+ return 0;
+}
+
/* ftdi_shutdown is called from usbserial:usb_serial_disconnect
* it is called when the usb device is disconnected
*
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
+/*
+ * The following are the values for the Matrix Orbital VK204-25-USB
+ * display, which use the FT232RL.
+ */
+#define MTXORB_VK_VID 0x1b3d
+#define MTXORB_VK_PID 0x0158
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
#define INTERBIOMETRICS_VID 0x1209
/* vendor id and device id defines */
+/* The native mos7840/7820 component */
#define USB_VENDOR_ID_MOSCHIP 0x9710
#define MOSCHIP_DEVICE_ID_7840 0x7840
#define MOSCHIP_DEVICE_ID_7820 0x7820
+/* The native component can have its vendor/device id's overridden
+ * in vendor-specific implementations. Such devices can be handled
+ * by making a change here, in moschip_port_id_table, and in
+ * moschip_id_table_combined
+ */
+#define USB_VENDOR_ID_BANDB 0x0856
+#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-/* Interrupt Rotinue Defines */
+/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
#define SERIAL_IIR_MS 0x00
static struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{} /* terminating entry */
};
static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{} /* terminating entry */
};
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
#define ANYDATA_PRODUCT_ADU_500A 0x6502
+#define AXESSTEL_VENDOR_ID 0x1726
+#define AXESSTEL_PRODUCT_MV110H 0x1000
+
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+ { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
if (!sg)
sg = scsi_sglist(srb);
- buflen = min(buflen, scsi_bufflen(srb));
/* This loop handles a single s-g list entry, which may
* include multiple pages. Find the initial page structure
unsigned int offset = 0;
struct scatterlist *sg = NULL;
+ buflen = min(buflen, scsi_bufflen(srb));
buflen = usb_stor_access_xfer_buf(buffer, buflen, srb, &sg, &offset,
TO_XFER_BUF);
if (buflen < scsi_bufflen(srb))
return 0;
}
-static int __devexit hitfb_remove(struct platform_device *dev)
+static int __exit hitfb_remove(struct platform_device *dev)
{
return unregister_framebuffer(&fb_info);
}
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
- .remove = __devexit_p(hitfb_remove),
+ .remove = __exit_p(hitfb_remove),
#ifdef CONFIG_PM
.suspend = hitfb_suspend,
.resume = hitfb_resume,
-/* drivers/video/pvr2fb.c
+/*
+ * drivers/video/pvr2fb.c
*
* Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega
* Dreamcast.
*
* Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (linuxdc.sourceforge.net).
+ * Copyright (c) 2001 - 2008 Paul Mundt <lethal@linux-sh.org>
*
- */
-
-/*
* This driver is mostly based on the excellent amifb and vfb sources. It uses
* an odd scheme for converting hardware values to/from framebuffer values,
* here are some hacked-up formulas:
} else {
var->sync &= ~FB_SYNC_BROADCAST;
var->vmode &= ~FB_VMODE_INTERLACED;
- var->vmode |= pvr2_var.vmode;
+ var->vmode |= FB_VMODE_NONINTERLACED;
}
if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) {
/* check we can fit these values into the registers */
- if (var->hsync_len > 255 || var->vsync_len > 255)
+ if (var->hsync_len > 255 || var->vsync_len > 63)
return -EINVAL;
- if ((var->xres + var->right_margin) >= 4096)
+ /* hdisplay end and hsync start */
+ if ((var->xres + var->right_margin) > 4096)
return -EINVAL;
+ /* vdisplay end and vsync start */
if ((var->yres + var->lower_margin) > 2048)
return -EINVAL;
var->blue.length = var->bits_per_pixel;
var->blue.offset = 0;
var->transp.length = 0;
+ var->transp.offset = 0;
break;
case 16:
if (sm->pdata->flags & SM501_FBPD_SWAP_FB_ENDIAN) {
- var->red.offset = 11;
- var->green.offset = 5;
- var->blue.offset = 0;
- } else {
var->blue.offset = 11;
var->green.offset = 5;
var->red.offset = 0;
+ } else {
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
}
+ var->transp.offset = 0;
var->red.length = 5;
var->green.length = 6;
break;
case 16:
- info->fix.visual = FB_VISUAL_DIRECTCOLOR;
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
break;
case 32:
case 16:
control |= SM501_DC_CRT_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_CRT_PALETTE);
break;
case 32:
case 16:
control |= SM501_DC_PANEL_CONTROL_16BPP;
+ sm501fb_setup_gamma(fbi, SM501_DC_PANEL_PALETTE);
break;
case 32:
t_outb(val, 0x3CF);
}
-static inline void enable_mmio(void)
+static void enable_mmio(void)
{
+ unsigned char tmp;
+
/* Goto New Mode */
outb(0x0B, 0x3C4);
inb(0x3C5);
/* Unprotect registers */
outb(NewMode1, 0x3C4);
+ tmp = inb(0x3C5);
outb(0x80, 0x3C5);
/* Enable MMIO */
outb(PCIReg, 0x3D4);
outb(inb(0x3D5) | 0x01, 0x3D5);
+
+ t_outb(NewMode1, 0x3C4);
+ t_outb(tmp, 0x3C5);
+}
+
+static void disable_mmio(void)
+{
+ unsigned char tmp;
+
+ /* Goto New Mode */
+ t_outb(0x0B, 0x3C4);
+ t_inb(0x3C5);
+
+ /* Unprotect registers */
+ t_outb(NewMode1, 0x3C4);
+ tmp = t_inb(0x3C5);
+ t_outb(0x80, 0x3C5);
+
+ /* Disable MMIO */
+ t_outb(PCIReg, 0x3D4);
+ t_outb(t_inb(0x3D5) & ~0x01, 0x3D5);
+
+ outb(NewMode1, 0x3C4);
+ outb(tmp, 0x3C5);
}
#define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
default_par.io_virt = ioremap_nocache(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
if (!default_par.io_virt) {
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
debug("ioremap failed\n");
- return -1;
+ err = -1;
+ goto out_unmap1;
}
enable_mmio();
if (!request_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len, "tridentfb")) {
debug("request_mem_region failed!\n");
+ disable_mmio();
err = -1;
- goto out_unmap;
+ goto out_unmap1;
}
fb_info.screen_base = ioremap_nocache(tridentfb_fix.smem_start,
tridentfb_fix.smem_len);
if (!fb_info.screen_base) {
- release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
debug("ioremap failed\n");
err = -1;
- goto out_unmap;
+ goto out_unmap2;
}
output("%s board found\n", pci_name(dev));
-#if 0
- output("Trident board found : mem = %X, io = %X, mem_v = %X, io_v = %X\n",
- tridentfb_fix.smem_start, tridentfb_fix.mmio_start, fb_info.screen_base, default_par.io_virt);
-#endif
displaytype = get_displaytype();
if (flatpanel)
if (!fb_find_mode(&default_var, &fb_info, mode, NULL, 0, NULL, bpp)) {
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
- fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ err = fb_alloc_cmap(&fb_info.cmap, 256, 0);
+ if (err < 0)
+ goto out_unmap2;
+
if (defaultaccel && acc)
default_var.accel_flags |= FB_ACCELF_TEXT;
else
fb_info.device = &dev->dev;
if (register_framebuffer(&fb_info) < 0) {
printk(KERN_ERR "tridentfb: could not register Trident framebuffer\n");
+ fb_dealloc_cmap(&fb_info.cmap);
err = -EINVAL;
- goto out_unmap;
+ goto out_unmap2;
}
output("fb%d: %s frame buffer device %dx%d-%dbpp\n",
fb_info.node, fb_info.fix.id, default_var.xres,
default_var.yres, default_var.bits_per_pixel);
return 0;
-out_unmap:
- if (default_par.io_virt)
- iounmap(default_par.io_virt);
+out_unmap2:
if (fb_info.screen_base)
iounmap(fb_info.screen_base);
+ release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
+ disable_mmio();
+out_unmap1:
+ if (default_par.io_virt)
+ iounmap(default_par.io_virt);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
return err;
}
iounmap(par->io_virt);
iounmap(fb_info.screen_base);
release_mem_region(tridentfb_fix.smem_start, tridentfb_fix.smem_len);
- release_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
+ release_mem_region(tridentfb_fix.mmio_start, tridentfb_fix.mmio_len);
}
/* List of boards that we are trying to support */
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/delay.h>
#include <linux/ds1wm.h>
static inline void ds1wm_write_register(struct ds1wm_data *ds1wm_data, u32 reg,
u8 val)
{
- __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+ __raw_writeb(val, ds1wm_data->map + (reg << ds1wm_data->bus_shift));
}
static inline u8 ds1wm_read_register(struct ds1wm_data *ds1wm_data, u32 reg)
{
- return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift));
+ return __raw_readb(ds1wm_data->map + (reg << ds1wm_data->bus_shift));
}
timeleft = wait_for_completion_timeout(&reset_done, DS1WM_TIMEOUT);
ds1wm_data->reset_complete = NULL;
if (!timeleft) {
- dev_dbg(&ds1wm_data->pdev->dev, "reset failed\n");
- return 1;
+ dev_err(&ds1wm_data->pdev->dev, "reset failed\n");
+ return 1;
}
/* Wait for the end of the reset. According to the specs, the time
(ds1wm_data->active_high ? DS1WM_INTEN_IAS : 0));
if (!ds1wm_data->slave_present) {
- dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n");
- return 1;
- }
+ dev_dbg(&ds1wm_data->pdev->dev, "reset: no devices found\n");
+ return 1;
+ }
- return 0;
+ return 0;
}
static int ds1wm_write(struct ds1wm_data *ds1wm_data, u8 data)
if (!pdev)
return -ENODEV;
- ds1wm_data = kzalloc(sizeof (*ds1wm_data), GFP_KERNEL);
+ ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL);
if (!ds1wm_data)
return -ENOMEM;
goto err1;
ds1wm_data->clk = clk_get(&pdev->dev, "ds1wm");
- if (!ds1wm_data->clk) {
- ret = -ENOENT;
+ if (IS_ERR(ds1wm_data->clk)) {
+ ret = PTR_ERR(ds1wm_data->clk);
goto err2;
}
int thread_notes;
};
+/*
+ * When a regset has a writeback hook, we call it on each thread before
+ * dumping user memory. On register window machines, this makes sure the
+ * user memory backing the register data is up to date before we read it.
+ */
+static void do_thread_regset_writeback(struct task_struct *task,
+ const struct user_regset *regset)
+{
+ if (regset->writeback)
+ regset->writeback(task, regset, 1);
+}
+
static int fill_thread_core_info(struct elf_thread_core_info *t,
const struct user_regset_view *view,
long signr, size_t *total)
sizeof(t->prstatus), &t->prstatus);
*total += notesize(&t->notes[0]);
+ do_thread_regset_writeback(t->task, &view->regsets[0]);
+
/*
* Each other regset might generate a note too. For each regset
* that has no core_note_type or is inactive, we leave t->notes[i]
*/
for (i = 1; i < view->n; ++i) {
const struct user_regset *regset = &view->regsets[i];
+ do_thread_regset_writeback(t->task, regset);
if (regset->core_note_type &&
(!regset->active || regset->active(t->task, regset))) {
int ret;
}
/**
- * sync_mapping_buffers - write out and wait upon a mapping's "associated"
- * buffers
+ * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
* @mapping: the mapping which wants those buffers written
*
* Starts I/O against the buffers at mapping->private_list, and waits upon
smp_mb();
if (buffer_dirty(bh)) {
list_add(&bh->b_assoc_buffers,
- &bh->b_assoc_map->private_list);
+ &mapping->private_list);
bh->b_assoc_map = mapping;
}
spin_unlock(lock);
cached files. Fix setxattr failure to certain Samba versions. Fix mount
of second share to disconnected server session (autoreconnect on this).
Add ability to modify cifs acls for handling chmod (when mounted with
-cifsacl flag).
+cifsacl flag). Fix prefixpath path separator so we can handle mounts
+with prefixpaths longer than one directory (one path component) when
+mounted to Windows servers.
Version 1.51
------------
cifsacl Report mode bits (e.g. on stat) based on the Windows ACL for
the file. (EXPERIMENTAL)
servern Specify the server 's netbios name (RFC1001 name) to use
- when attempting to setup a session to the server. This is
+ when attempting to setup a session to the server.
This is needed for mounting to some older servers (such
as OS/2 or Windows 98 and Windows ME) since they do not
support a default server name. A server name can be up
if (mid_entry->resp_buf) {
cifs_dump_detail(mid_entry->resp_buf);
cifs_dump_mem("existing buf: ",
- mid_entry->resp_buf,
- 62 /* fixme */);
+ mid_entry->resp_buf, 62);
}
}
}
return length;
}
-#endif
+#endif /* STATS */
static struct proc_dir_entry *proc_fs_cifs;
read_proc_t cifs_txanchor_read;
cifs_stats_read, NULL);
if (pde)
pde->write_proc = cifs_stats_write;
-#endif
+#endif /* STATS */
pde = create_proc_read_entry("cifsFYI", 0, proc_fs_cifs,
cifsFYI_read, NULL);
if (pde)
/* BB should we turn on MAY flags for other MUST options? */
return count;
}
-#endif
+#else
+inline void cifs_proc_init(void)
+{
+}
+
+inline void cifs_proc_clean(void)
+{
+}
+#endif /* PROC_FS */
void cifs_dump_mem(char *label, void *data, int length);
#ifdef CONFIG_CIFS_DEBUG2
+#define DBG2 2
void cifs_dump_detail(struct smb_hdr *);
void cifs_dump_mids(struct TCP_Server_Info *);
+#else
+#define DBG2 0
#endif
extern int traceSMB; /* flag which enables the function below */
void dump_smb(struct smb_hdr *, int);
* ---------
*/
#else /* _CIFS_DEBUG */
-#define cERROR(button,prspec)
-#define cEVENT(format,arg...)
+#define cERROR(button, prspec)
+#define cEVENT(format, arg...)
#define cFYI(button, prspec)
-#define cifserror(format,arg...)
+#define cifserror(format, arg...)
#endif /* _CIFS_DEBUG */
#endif /* _H_CIFS_DEBUG */
cFYI(1, ("DFS: node path: %s", ref->node_name));
cFYI(1, ("DFS: fl: %hd, srv_type: %hd", ref->flags, ref->server_type));
cFYI(1, ("DFS: ref_flags: %hd, path_consumed: %hd", ref->ref_flag,
- ref->PathConsumed));
+ ref->path_consumed));
}
#ifdef CONFIG_CIFS_DEBUG2
if (cifsFYI && !IS_ERR(spnego_key)) {
struct cifs_spnego_msg *msg = spnego_key->payload.data;
- cifs_dump_mem("SPNEGO reply blob:", msg->data, min(1024,
+ cifs_dump_mem("SPNEGO reply blob:", msg->data, min(1024U,
msg->secblob_len + msg->sesskey_len));
}
#endif /* CONFIG_CIFS_DEBUG2 */
*
*/
int
-cifs_strfromUCS_le(char *to, const __le16 * from,
+cifs_strfromUCS_le(char *to, const __le16 *from,
int len, const struct nls_table *codepage)
{
int i;
*
*/
int
-cifs_strtoUCS(__le16 * to, const char *from, int len,
+cifs_strtoUCS(__le16 *to, const char *from, int len,
const struct nls_table *codepage)
{
int charlen;
const wchar_t *anchor2 = ucs2;
while (*ucs1) {
- if (*ucs1 == *ucs2) { /* Partial match found */
+ if (*ucs1 == *ucs2) {
+ /* Partial match found */
ucs1++;
ucs2++;
} else {
{
register const struct UniCaseRange *rp;
- if (uc < sizeof (CifsUniUpperTable)) { /* Latin characters */
+ if (uc < sizeof(CifsUniUpperTable)) {
+ /* Latin characters */
return uc + CifsUniUpperTable[uc]; /* Use base tables */
} else {
rp = CifsUniUpperRange; /* Use range tables */
{
register struct UniCaseRange *rp;
- if (uc < sizeof (UniLowerTable)) { /* Latin characters */
+ if (uc < sizeof(UniLowerTable)) {
+ /* Latin characters */
return uc + UniLowerTable[uc]; /* Use base tables */
} else {
rp = UniLowerRange; /* Use range tables */
static const struct cifs_sid sid_everyone = {
1, 1, {0, 0, 0, 0, 0, 1}, {0} };
/* group users */
-static const struct cifs_sid sid_user =
- {1, 2 , {0, 0, 0, 0, 0, 5}, {} };
+static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {} };
int match_sid(struct cifs_sid *ctsid)
/* For deny ACEs we change the mask so that subsequent allow access
control entries do not turn on the bits we are denying */
if (type == ACCESS_DENIED) {
- if (flags & GENERIC_ALL) {
+ if (flags & GENERIC_ALL)
*pbits_to_set &= ~S_IRWXUGO;
- }
+
if ((flags & GENERIC_WRITE) ||
((flags & FILE_WRITE_RIGHTS) == FILE_WRITE_RIGHTS))
*pbits_to_set &= ~S_IWUGO;
if (flags & GENERIC_ALL) {
*pmode |= (S_IRWXUGO & (*pbits_to_set));
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("all perms"));
-#endif
+ cFYI(DBG2, ("all perms"));
return;
}
if ((flags & GENERIC_WRITE) ||
((flags & FILE_EXEC_RIGHTS) == FILE_EXEC_RIGHTS))
*pmode |= (S_IXUGO & (*pbits_to_set));
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("access flags 0x%x mode now 0x%x", flags, *pmode));
-#endif
+ cFYI(DBG2, ("access flags 0x%x mode now 0x%x", flags, *pmode));
return;
}
if (mode & S_IXUGO)
*pace_flags |= SET_FILE_EXEC_RIGHTS;
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("mode: 0x%x, access flags now 0x%x", mode, *pace_flags));
-#endif
+ cFYI(DBG2, ("mode: 0x%x, access flags now 0x%x", mode, *pace_flags));
return;
}
return;
}
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("DACL revision %d size %d num aces %d",
+ cFYI(DBG2, ("DACL revision %d size %d num aces %d",
le16_to_cpu(pdacl->revision), le16_to_cpu(pdacl->size),
le32_to_cpu(pdacl->num_aces)));
-#endif
/* reset rwx permissions for user/group/other.
Also, if num_aces is 0 i.e. DACL has no ACEs,
ppace = kmalloc(num_aces * sizeof(struct cifs_ace *),
GFP_KERNEL);
-/* cifscred->cecount = pdacl->num_aces;
- cifscred->aces = kmalloc(num_aces *
- sizeof(struct cifs_ace *), GFP_KERNEL);*/
-
for (i = 0; i < num_aces; ++i) {
ppace[i] = (struct cifs_ace *) (acl_base + acl_size);
#ifdef CONFIG_CIFS_DEBUG2
&sid_everyone, nmode, S_IRWXO);
pndacl->size = cpu_to_le16(size + sizeof(struct cifs_acl));
- pndacl->num_aces = 3;
+ pndacl->num_aces = cpu_to_le32(3);
return (0);
}
le32_to_cpu(pntsd->gsidoffset));
dacloffset = le32_to_cpu(pntsd->dacloffset);
dacl_ptr = (struct cifs_acl *)((char *)pntsd + dacloffset);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("revision %d type 0x%x ooffset 0x%x goffset 0x%x "
+ cFYI(DBG2, ("revision %d type 0x%x ooffset 0x%x goffset 0x%x "
"sacloffset 0x%x dacloffset 0x%x",
pntsd->revision, pntsd->type, le32_to_cpu(pntsd->osidoffset),
le32_to_cpu(pntsd->gsidoffset),
le32_to_cpu(pntsd->sacloffset), dacloffset));
-#endif
/* cifs_dump_mem("owner_sid: ", owner_sid_ptr, 64); */
rc = parse_sid(owner_sid_ptr, end_of_acl);
if (rc)
struct super_block *sb;
struct cifs_sb_info *cifs_sb;
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
-#endif
+ cFYI(DBG2, ("set ACL for %s from mode 0x%x", path, inode->i_mode));
if (!inode)
return (rc);
}
rc = CIFSSMBSetCIFSACL(xid, cifs_sb->tcon, fid, pnntsd, acllen);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("SetCIFSACL rc = %d", rc));
-#endif
+ cFYI(DBG2, ("SetCIFSACL rc = %d", rc));
if (unlock_file == TRUE)
atomic_dec(&open_file->wrtPending);
else
u32 acllen = 0;
int rc = 0;
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("converting ACL to mode for %s", path));
-#endif
+ cFYI(DBG2, ("converting ACL to mode for %s", path));
pntsd = get_cifs_acl(&acllen, inode, path);
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
struct cifs_ntsd *pntsd = NULL; /* acl obtained from server */
struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("set ACL from mode for %s", path));
-#endif
+ cFYI(DBG2, ("set ACL from mode for %s", path));
/* Get the security descriptor */
pntsd = get_cifs_acl(&acllen, inode, path);
rc = build_sec_desc(pntsd, pnntsd, acllen, inode, nmode);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("build_sec_desc rc: %d", rc));
-#endif
+ cFYI(DBG2, ("build_sec_desc rc: %d", rc));
if (!rc) {
/* Set the security descriptor */
rc = set_cifs_acl(pnntsd, acllen, inode, path);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("set_cifs_acl rc: %d", rc));
-#endif
+ cFYI(DBG2, ("set_cifs_acl rc: %d", rc));
}
kfree(pnntsd);
return;
}
rc = cifs_umount(sb, cifs_sb);
- if (rc) {
+ if (rc)
cERROR(1, ("cifs_umount failed with return code %d", rc));
- }
#ifdef CONFIG_CIFS_DFS_UPCALL
if (cifs_sb->mountdata) {
kfree(cifs_sb->mountdata);
static struct quotactl_ops cifs_quotactl_ops = {
.set_xquota = cifs_xquota_set,
- .get_xquota = cifs_xquota_set,
+ .get_xquota = cifs_xquota_get,
.set_xstate = cifs_xstate_set,
.get_xstate = cifs_xstate_get,
};
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
-#ifdef CONFIG_CIFS_DFS_UPCALL
dfs_shrink_umount_helper(vfsmnt);
-#endif /* CONFIG CIFS_DFS_UPCALL */
if (!(flags & MNT_FORCE))
return;
init_cifs(void)
{
int rc = 0;
-#ifdef CONFIG_PROC_FS
cifs_proc_init();
-#endif
/* INIT_LIST_HEAD(&GlobalServerList);*/ /* BB not implemented yet */
INIT_LIST_HEAD(&GlobalSMBSessionList);
INIT_LIST_HEAD(&GlobalTreeConnectionList);
out_destroy_inodecache:
cifs_destroy_inodecache();
out_clean_proc:
-#ifdef CONFIG_PROC_FS
cifs_proc_clean();
-#endif
return rc;
}
static void __exit
exit_cifs(void)
{
- cFYI(0, ("exit_cifs"));
-#ifdef CONFIG_PROC_FS
+ cFYI(DBG2, ("exit_cifs"));
cifs_proc_clean();
-#endif
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
#endif
struct dfs_info3_param {
int flags; /* DFSREF_REFERRAL_SERVER, DFSREF_STORAGE_SERVER*/
- int PathConsumed;
+ int path_consumed;
int server_type;
int ref_flag;
char *path_name;
extern int SendReceive2(const unsigned int /* xid */ , struct cifsSesInfo *,
struct kvec *, int /* nvec to send */,
int * /* type of buf returned */ , const int flags);
-extern int SendReceiveBlockingLock(const unsigned int /* xid */ ,
- struct cifsTconInfo *,
- struct smb_hdr * /* input */ ,
- struct smb_hdr * /* out */ ,
- int * /* bytes returned */);
+extern int SendReceiveBlockingLock(const unsigned int xid,
+ struct cifsTconInfo *ptcon,
+ struct smb_hdr *in_buf ,
+ struct smb_hdr *out_buf,
+ int *bytes_returned);
extern int checkSMB(struct smb_hdr *smb, __u16 mid, unsigned int length);
extern int is_valid_oplock_break(struct smb_hdr *smb, struct TCP_Server_Info *);
extern int is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
struct cifsTconInfo *);
extern void DeleteOplockQEntry(struct oplock_q_entry *);
-extern struct timespec cifs_NTtimeToUnix(u64 /* utc nanoseconds since 1601 */ );
+extern struct timespec cifs_NTtimeToUnix(u64 utc_nanoseconds_since_1601);
extern u64 cifs_UnixTimeToNT(struct timespec);
extern __le64 cnvrtDosCifsTm(__u16 date, __u16 time);
extern struct timespec cnvrtDosUnixTm(__u16 date, __u16 time);
extern int cifs_umount(struct super_block *, struct cifs_sb_info *);
#ifdef CONFIG_CIFS_DFS_UPCALL
extern void dfs_shrink_umount_helper(struct vfsmount *vfsmnt);
-#endif
+#else
+static inline void dfs_shrink_umount_helper(struct vfsmount *vfsmnt)
+{
+}
+#endif /* DFS_UPCALL */
void cifs_proc_init(void);
void cifs_proc_clean(void);
struct kstatfs *FSData);
extern int CIFSSMBSetTimes(const int xid, struct cifsTconInfo *tcon,
- const char *fileName, const FILE_BASIC_INFO * data,
+ const char *fileName, const FILE_BASIC_INFO *data,
const struct nls_table *nls_codepage,
int remap_special_chars);
extern int CIFSSMBSetFileTimes(const int xid, struct cifsTconInfo *tcon,
- const FILE_BASIC_INFO * data, __u16 fid);
+ const FILE_BASIC_INFO *data, __u16 fid);
#if 0
extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon,
char *fileName, __u16 dos_attributes,
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
to this tcon */
}
-/* If the return code is zero, this function must fill in request_buf pointer */
+/* Allocate and return pointer to an SMB request buffer, and set basic
+ SMB information in the SMB header. If the return code is zero, this
+ function must have filled in request_buf pointer */
static int
small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
- void **request_buf /* returned */)
+ void **request_buf)
{
int rc = 0;
*response_buf = *request_buf;
header_assemble((struct smb_hdr *) *request_buf, smb_command, tcon,
- wct /*wct */ );
+ wct);
if (tcon != NULL)
cifs_stats_inc(&tcon->num_smbs_sent);
if (remain >= (MIN_TZ_ADJ / 2))
result += MIN_TZ_ADJ;
if (val < 0)
- result = - result;
+ result = -result;
server->timeAdj = result;
} else {
server->timeAdj = (int)tmp;
server->maxBuf = min(le32_to_cpu(pSMBr->MaxBufferSize),
(__u32) CIFSMaxBufSize + MAX_CIFS_HDR_SIZE);
server->maxRw = le32_to_cpu(pSMBr->MaxRawSize);
- cFYI(0, ("Max buf = %d", ses->server->maxBuf));
+ cFYI(DBG2, ("Max buf = %d", ses->server->maxBuf));
GETU32(ses->server->sessid) = le32_to_cpu(pSMBr->SessionKey);
server->capabilities = le32_to_cpu(pSMBr->Capabilities);
server->timeAdj = (int)(__s16)le16_to_cpu(pSMBr->ServerTimeZone);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("Posix delete returned %d", rc));
- }
cifs_buf_release(pSMB);
cifs_stats_inc(&tcon->num_deletes);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_deletes);
- if (rc) {
+ if (rc)
cFYI(1, ("Error in RMFile = %d", rc));
- }
cifs_buf_release(pSMB);
if (rc == -EAGAIN)
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_rmdirs);
- if (rc) {
+ if (rc)
cFYI(1, ("Error in RMDir = %d", rc));
- }
cifs_buf_release(pSMB);
if (rc == -EAGAIN)
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_mkdirs);
- if (rc) {
+ if (rc)
cFYI(1, ("Error in Mkdir = %d", rc));
- }
cifs_buf_release(pSMB);
if (rc == -EAGAIN)
int
CIFSPOSIXCreate(const int xid, struct cifsTconInfo *tcon, __u32 posix_flags,
- __u64 mode, __u16 * netfid, FILE_UNIX_BASIC_INFO *pRetData,
+ __u64 mode, __u16 *netfid, FILE_UNIX_BASIC_INFO *pRetData,
__u32 *pOplock, const char *name,
const struct nls_table *nls_codepage, int remap)
{
int rc = 0;
int bytes_returned = 0;
__u16 params, param_offset, offset, byte_count, count;
- OPEN_PSX_REQ * pdata;
- OPEN_PSX_RSP * psx_rsp;
+ OPEN_PSX_REQ *pdata;
+ OPEN_PSX_RSP *psx_rsp;
cFYI(1, ("In POSIX Create"));
PsxCreat:
/* check to make sure response data is there */
if (psx_rsp->ReturnedLevel != cpu_to_le16(SMB_QUERY_FILE_UNIX_BASIC)) {
pRetData->Type = cpu_to_le32(-1); /* unknown */
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("unknown type"));
-#endif
+ cFYI(DBG2, ("unknown type"));
} else {
if (pSMBr->ByteCount < sizeof(OPEN_PSX_RSP)
+ sizeof(FILE_UNIX_BASIC_INFO)) {
int
SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int openDisposition,
- const int access_flags, const int create_options, __u16 * netfid,
- int *pOplock, FILE_ALL_INFO * pfile_info,
+ const int access_flags, const int create_options, __u16 *netfid,
+ int *pOplock, FILE_ALL_INFO *pfile_info,
const struct nls_table *nls_codepage, int remap)
{
int rc = -EACCES;
if (create_options & CREATE_OPTION_SPECIAL)
pSMB->FileAttributes = cpu_to_le16(ATTR_SYSTEM);
- else
- pSMB->FileAttributes = cpu_to_le16(0/*ATTR_NORMAL*/); /* BB FIXME */
+ else /* BB FIXME BB */
+ pSMB->FileAttributes = cpu_to_le16(0/*ATTR_NORMAL*/);
/* if ((omode & S_IWUGO) == 0)
pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);*/
int
CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int openDisposition,
- const int access_flags, const int create_options, __u16 * netfid,
- int *pOplock, FILE_ALL_INFO * pfile_info,
+ const int access_flags, const int create_options, __u16 *netfid,
+ int *pOplock, FILE_ALL_INFO *pfile_info,
const struct nls_table *nls_codepage, int remap)
{
int rc = -EACCES;
} /* else setting file size with write of zero bytes */
if (wct == 14)
byte_count = bytes_sent + 1; /* pad */
- else /* wct == 12 */ {
+ else /* wct == 12 */
byte_count = bytes_sent + 5; /* bigger pad, smaller smb hdr */
- }
+
pSMB->DataLengthLow = cpu_to_le16(bytes_sent & 0xFFFF);
pSMB->DataLengthHigh = cpu_to_le16(bytes_sent >> 16);
pSMB->hdr.smb_buf_length += byte_count;
rc = -EIO;
*nbytes = 0;
} else {
- WRITE_RSP * pSMBr = (WRITE_RSP *)iov[0].iov_base;
+ WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
*nbytes = le16_to_cpu(pSMBr->CountHigh);
*nbytes = (*nbytes) << 16;
*nbytes += le16_to_cpu(pSMBr->Count);
/* SMB buffer freed by function above */
}
cifs_stats_inc(&tcon->num_locks);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in Lock = %d", rc));
- }
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
count = sizeof(struct cifs_posix_lock);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB from sess */
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
if (get_flag)
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_renames);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in rename = %d", rc));
- }
cifs_buf_release(pSMB);
data_offset = (char *) (&pSMB->hdr.Protocol) + offset;
rename_info = (struct set_file_rename *) data_offset;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB from sess */
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
rc = SendReceive(xid, pTcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&pTcon->num_t2renames);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in Rename (by file handle) = %d", rc));
- }
cifs_buf_release(pSMB);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_symlinks);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in SetPathInfo create symlink = %d", rc));
- }
if (pSMB)
cifs_buf_release(pSMB);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_hardlinks);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in SetPathInfo (hard link) = %d", rc));
- }
cifs_buf_release(pSMB);
if (rc == -EAGAIN)
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
cifs_stats_inc(&tcon->num_hardlinks);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in hard link (NT rename) = %d", rc));
- }
+
cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto winCreateHardLinkRetry;
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("Set POSIX ACL returned %d", rc));
- }
setACLerrorExit:
cifs_buf_release(pSMB);
/* BB fix tabs in this function FIXME BB */
int
CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon,
- const int netfid, __u64 * pExtAttrBits, __u64 *pMask)
+ const int netfid, __u64 *pExtAttrBits, __u64 *pMask)
{
int rc = 0;
struct smb_t2_qfi_req *pSMB = NULL;
if (rc)
return rc;
- params = 2 /* level */ +2 /* fid */;
+ params = 2 /* level */ + 2 /* fid */;
pSMB->t2.TotalDataCount = 0;
pSMB->t2.MaxParameterCount = cpu_to_le16(4);
/* BB find exact max data count below from sess structure BB */
{
int rc = 0;
int buf_type = 0;
- QUERY_SEC_DESC_REQ * pSMB;
+ QUERY_SEC_DESC_REQ *pSMB;
struct kvec iov[1];
cFYI(1, ("GetCifsACL"));
if (rc) {
cFYI(1, ("Send error in QuerySecDesc = %d", rc));
} else { /* decode response */
- __le32 * parm;
+ __le32 *parm;
__u32 parm_len;
__u32 acl_len;
struct smb_com_ntransact_rsp *pSMBr;
FILE_ALL_INFO *pFinfo,
const struct nls_table *nls_codepage, int remap)
{
- QUERY_INFORMATION_REQ * pSMB;
- QUERY_INFORMATION_RSP * pSMBr;
+ QUERY_INFORMATION_REQ *pSMB;
+ QUERY_INFORMATION_RSP *pSMBr;
int rc = 0;
int bytes_returned;
int name_len;
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in QueryInfo = %d", rc));
- } else if (pFinfo) { /* decode response */
+ } else if (pFinfo) {
struct timespec ts;
__u32 time = le32_to_cpu(pSMBr->last_write_time);
+
+ /* decode response */
/* BB FIXME - add time zone adjustment BB */
memset(pFinfo, 0, sizeof(FILE_ALL_INFO));
ts.tv_nsec = 0;
int
CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_ALL_INFO * pFindData,
+ FILE_ALL_INFO *pFindData,
int legacy /* old style infolevel */,
const struct nls_table *nls_codepage, int remap)
{
else if (pFindData) {
int size;
__u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- if (legacy) /* we do not read the last field, EAsize,
- fortunately since it varies by subdialect
- and on Set vs. Get, is two bytes or 4
- bytes depending but we don't care here */
+
+ /* On legacy responses we do not read the last field,
+ EAsize, fortunately since it varies by subdialect and
+ also note it differs on Set vs. Get, ie two bytes or 4
+ bytes depending but we don't care here */
+ if (legacy)
size = sizeof(FILE_INFO_STANDARD);
else
size = sizeof(FILE_ALL_INFO);
return rc;
}
-#if 0 /* function unused at present */
-int CIFSFindSingle(const int xid, struct cifsTconInfo *tcon,
- const char *searchName, FILE_ALL_INFO * findData,
- const struct nls_table *nls_codepage)
-{
-/* level 257 SMB_ */
- TRANSACTION2_FFIRST_REQ *pSMB = NULL;
- TRANSACTION2_FFIRST_RSP *pSMBr = NULL;
- int rc = 0;
- int bytes_returned;
- int name_len;
- __u16 params, byte_count;
-
- cFYI(1, ("In FindUnique"));
-findUniqueRetry:
- rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
- (void **) &pSMBr);
- if (rc)
- return rc;
-
- if (pSMB->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len =
- cifsConvertToUCS((__le16 *) pSMB->FileName, searchName,
- PATH_MAX, nls_codepage);
- name_len++; /* trailing null */
- name_len *= 2;
- } else { /* BB improve the check for buffer overruns BB */
- name_len = strnlen(searchName, PATH_MAX);
- name_len++; /* trailing null */
- strncpy(pSMB->FileName, searchName, name_len);
- }
-
- params = 12 + name_len /* includes null */ ;
- pSMB->TotalDataCount = 0; /* no EAs */
- pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
- pSMB->MaxSetupCount = 0;
- pSMB->Reserved = 0;
- pSMB->Flags = 0;
- pSMB->Timeout = 0;
- pSMB->Reserved2 = 0;
- pSMB->ParameterOffset = cpu_to_le16(
- offsetof(struct smb_com_transaction2_ffirst_req, InformationLevel)-4);
- pSMB->DataCount = 0;
- pSMB->DataOffset = 0;
- pSMB->SetupCount = 1; /* one byte, no need to le convert */
- pSMB->Reserved3 = 0;
- pSMB->SubCommand = cpu_to_le16(TRANS2_FIND_FIRST);
- byte_count = params + 1 /* pad */ ;
- pSMB->TotalParameterCount = cpu_to_le16(params);
- pSMB->ParameterCount = pSMB->TotalParameterCount;
- pSMB->SearchAttributes =
- cpu_to_le16(ATTR_READONLY | ATTR_HIDDEN | ATTR_SYSTEM |
- ATTR_DIRECTORY);
- pSMB->SearchCount = cpu_to_le16(16); /* BB increase */
- pSMB->SearchFlags = cpu_to_le16(1);
- pSMB->InformationLevel = cpu_to_le16(SMB_FIND_FILE_DIRECTORY_INFO);
- pSMB->SearchStorageType = 0; /* BB what should we set this to? BB */
- pSMB->hdr.smb_buf_length += byte_count;
- pSMB->ByteCount = cpu_to_le16(byte_count);
-
- rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned, 0);
-
- if (rc) {
- cFYI(1, ("Send error in FindFileDirInfo = %d", rc));
- } else { /* decode response */
- cifs_stats_inc(&tcon->num_ffirst);
- /* BB fill in */
- }
-
- cifs_buf_release(pSMB);
- if (rc == -EAGAIN)
- goto findUniqueRetry;
-
- return rc;
-}
-#endif /* end unused (temporarily) function */
-
/* xid, tcon, searchName and codepage are input parms, rest are returned */
int
CIFSFindFirst(const int xid, struct cifsTconInfo *tcon,
/* level 257 SMB_ */
TRANSACTION2_FFIRST_REQ *pSMB = NULL;
TRANSACTION2_FFIRST_RSP *pSMBr = NULL;
- T2_FFIRST_RSP_PARMS * parms;
+ T2_FFIRST_RSP_PARMS *parms;
int rc = 0;
int bytes_returned = 0;
int name_len;
{
TRANSACTION2_FNEXT_REQ *pSMB = NULL;
TRANSACTION2_FNEXT_RSP *pSMBr = NULL;
- T2_FNEXT_RSP_PARMS * parms;
+ T2_FNEXT_RSP_PARMS *parms;
char *response_data;
int rc = 0;
int bytes_returned, name_len;
pSMB->FileID = searchHandle;
pSMB->ByteCount = 0;
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
- if (rc) {
+ if (rc)
cERROR(1, ("Send error in FindClose = %d", rc));
- }
+
cifs_stats_inc(&tcon->num_fclose);
/* Since session is dead, search handle closed on server already */
int
CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- __u64 * inode_number,
+ __u64 *inode_number,
const struct nls_table *nls_codepage, int remap)
{
int rc = 0;
cERROR(1, ("Send error in SETFSUnixInfo = %d", rc));
} else { /* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc) {
+ if (rc)
rc = -EIO; /* bad smb */
- }
}
cifs_buf_release(pSMB);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("SetPathInfo (file size) returned %d", rc));
- }
cifs_buf_release(pSMB);
pSMB->ByteCount = cpu_to_le16(byte_count);
memcpy(data_offset, data, sizeof(FILE_BASIC_INFO));
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *) pSMB, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("Send error in Set Time (SetFileInfo) = %d", rc));
- }
/* Note: On -EAGAIN error only caller can retry on handle based calls
since file handle passed in no longer valid */
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("SetPathInfo (times) returned %d", rc));
- }
cifs_buf_release(pSMB);
pSMB->ByteCount = cpu_to_le16(name_len + 1);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("Error in LegacySetAttr = %d", rc));
- }
cifs_buf_release(pSMB);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("SetPathInfo (perms) returned %d", rc));
- }
if (pSMB)
cifs_buf_release(pSMB);
pSMB->ByteCount = cpu_to_le16(byte_count);
rc = SendReceive(xid, tcon->ses, (struct smb_hdr *) pSMB,
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
- if (rc) {
+ if (rc)
cFYI(1, ("SetPathInfo (EA) returned %d", rc));
- }
cifs_buf_release(pSMB);
originally at mount time */
if ((saved_cap & CIFS_UNIX_POSIX_ACL_CAP) == 0)
cap &= ~CIFS_UNIX_POSIX_ACL_CAP;
- if ((saved_cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) == 0)
+ if ((saved_cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) == 0) {
+ if (cap & CIFS_UNIX_POSIX_PATHNAMES_CAP)
+ cERROR(1, ("POSIXPATH support change"));
cap &= ~CIFS_UNIX_POSIX_PATHNAMES_CAP;
+ } else if ((cap & CIFS_UNIX_POSIX_PATHNAMES_CAP) == 0) {
+ cERROR(1, ("possible reconnect error"));
+ cERROR(1,
+ ("server disabled POSIX path support"));
+ }
}
cap &= CIFS_UNIX_CAP_MASK;
if (sb && (CIFS_SB(sb)->rsize > 127 * 1024)) {
if ((cap & CIFS_UNIX_LARGE_READ_CAP) == 0) {
CIFS_SB(sb)->rsize = 127 * 1024;
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("larger reads not supported by srv"));
-#endif
+ cFYI(DBG2,
+ ("larger reads not supported by srv"));
}
}
}
}
+static void
+convert_delimiter(char *path, char delim)
+{
+ int i;
+ char old_delim;
+
+ if (path == NULL)
+ return;
+
+ if (delim == '/')
+ old_delim = '\\';
+ else
+ old_delim = '/';
+
+ for (i = 0; path[i] != '\0'; i++) {
+ if (path[i] == old_delim)
+ path[i] = delim;
+ }
+}
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
char *mount_data, const char *devname)
cifs_sb->prepath = volume_info.prepath;
if (cifs_sb->prepath) {
cifs_sb->prepathlen = strlen(cifs_sb->prepath);
- cifs_sb->prepath[0] = CIFS_DIR_SEP(cifs_sb);
+ /* we can not convert the / to \ in the path
+ separators in the prefixpath yet because we do not
+ know (until reset_cifs_unix_caps is called later)
+ whether POSIX PATH CAP is available. We normalize
+ the / to \ after reset_cifs_unix_caps is called */
volume_info.prepath = NULL;
} else
cifs_sb->prepathlen = 0;
else
tcon->unix_ext = 0; /* server does not support them */
+ /* convert forward to back slashes in prepath here if needed */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+ convert_delimiter(cifs_sb->prepath,
+ CIFS_DIR_SEP(cifs_sb));
+
if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) {
cifs_sb->rsize = 1024 * 127;
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("no very large read support, rsize now 127K"));
-#endif
+ cFYI(DBG2,
+ ("no very large read support, rsize now 127K"));
}
if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X))
cifs_sb->wsize = min(cifs_sb->wsize,
*
* vfs operations that deal with dentries
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
return full_path;
}
-/* char * build_wildcard_path_from_dentry(struct dentry *direntry)
-{
- if(full_path == NULL)
- return full_path;
-
- full_path[namelen] = '\\';
- full_path[namelen+1] = '*';
- full_path[namelen+2] = 0;
-BB remove above eight lines BB */
-
/* Inode operations in similar order to how they appear in Linux file fs.h */
int
disposition = FILE_OVERWRITE_IF;
else if ((oflags & O_CREAT) == O_CREAT)
disposition = FILE_OPEN_IF;
- else {
+ else
cFYI(1, ("Create flag not set in create function"));
- }
}
/* BB add processing to set equivalent of mode - e.g. via CreateX with
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
int oplock = 0;
u16 fileHandle;
- FILE_ALL_INFO * buf;
+ FILE_ALL_INFO *buf;
cFYI(1, ("sfu compat create special file"));
int isValid = 1;
if (direntry->d_inode) {
- if (cifs_revalidate(direntry)) {
+ if (cifs_revalidate(direntry))
return 0;
- }
} else {
cFYI(1, ("neg dentry 0x%p name = %s",
direntry, direntry->d_name.name));
/*
* fs/cifs/dns_resolve.h -- DNS Resolver upcall management for CIFS DFS
* Handles host name to IP address resolution
- *
+ *
* Copyright (c) International Business Machines Corp., 2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
/* No way on Linux VFS to ask to monitor xattr
changes (and no stream support either */
- if (fcntl_notify_flags & DN_ACCESS) {
+ if (fcntl_notify_flags & DN_ACCESS)
cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_ACCESS;
- }
if (fcntl_notify_flags & DN_MODIFY) {
/* What does this mean on directories? */
cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_WRITE |
cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_CREATION |
FILE_NOTIFY_CHANGE_LAST_WRITE;
}
- if (fcntl_notify_flags & DN_DELETE) {
+ if (fcntl_notify_flags & DN_DELETE)
cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_LAST_WRITE;
- }
if (fcntl_notify_flags & DN_RENAME) {
/* BB review this - checking various server behaviors */
cifs_ntfy_flags |= FILE_NOTIFY_CHANGE_DIR_NAME |
int disposition = FILE_OPEN;
__u16 netfid;
- if (file->private_data) {
+ if (file->private_data)
pCifsFile = (struct cifsFileInfo *)file->private_data;
- } else
+ else
return -EBADF;
xid = GetXid();
the struct would be in each open file,
but this should give enough time to
clear the socket */
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("close delay, write pending"));
-#endif /* DEBUG2 */
+ cFYI(DBG2,
+ ("close delay, write pending"));
msleep(timeout);
timeout *= 4;
}
xid = GetXid();
/* BB add check for wbc flags */
page_cache_get(page);
- if (!PageUptodate(page)) {
+ if (!PageUptodate(page))
cFYI(1, ("ppw - page not up to date"));
- }
/*
* Set the "writeback" flag, and clear "dirty" in the radix tree.
cFYI(1, ("commit write for page %p up to position %lld for %d",
page, position, to));
spin_lock(&inode->i_lock);
- if (position > inode->i_size) {
+ if (position > inode->i_size)
i_size_write(inode, position);
- }
+
spin_unlock(&inode->i_lock);
if (!PageUptodate(page)) {
position = ((loff_t)page->index << PAGE_CACHE_SHIFT) + offset;
}
open_file = (struct cifsFileInfo *)file->private_data;
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
+ if ((file->f_flags & O_ACCMODE) == O_WRONLY)
cFYI(1, ("attempting read on write only file instance"));
- }
+
for (total_read = 0, current_offset = read_data;
read_size > total_read;
total_read += bytes_read, current_offset += bytes_read) {
smb_read_data +
4 /* RFC1001 length field */ +
le16_to_cpu(pSMBr->DataOffset),
- bytes_read)) {
+ bytes_read))
rc = -EFAULT;
- }
if (buf_type == CIFS_SMALL_BUFFER)
cifs_small_buf_release(smb_read_data);
pTcon = cifs_sb->tcon;
pagevec_init(&lru_pvec, 0);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("rpages: num pages %d", num_pages));
-#endif
+ cFYI(DBG2, ("rpages: num pages %d", num_pages));
for (i = 0; i < num_pages; ) {
unsigned contig_pages;
struct page *tmp_page;
/* Read size needs to be in multiples of one page */
read_size = min_t(const unsigned int, read_size,
cifs_sb->rsize & PAGE_CACHE_MASK);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("rpages: read size 0x%x contiguous pages %d",
+ cFYI(DBG2, ("rpages: read size 0x%x contiguous pages %d",
read_size, contig_pages));
-#endif
rc = -EAGAIN;
while (rc == -EAGAIN) {
if ((open_file->invalidHandle) &&
struct cifs_sb_info *cifs_sb;
cifs_sb = CIFS_SB(cifsInode->vfs_inode.i_sb);
- if ( cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO ) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
/* since no page cache to corrupt on directio
we can change size safely */
return 1;
#include "cifs_debug.h"
#include "cifs_fs_sb.h"
+
+static void cifs_set_ops(struct inode *inode)
+{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+
+ switch (inode->i_mode & S_IFMT) {
+ case S_IFREG:
+ inode->i_op = &cifs_file_inode_ops;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ inode->i_fop = &cifs_file_direct_nobrl_ops;
+ else
+ inode->i_fop = &cifs_file_direct_ops;
+ } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ inode->i_fop = &cifs_file_nobrl_ops;
+ else { /* not direct, send byte range locks */
+ inode->i_fop = &cifs_file_ops;
+ }
+
+
+ /* check if server can support readpages */
+ if (cifs_sb->tcon->ses->server->maxBuf <
+ PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE)
+ inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
+ else
+ inode->i_data.a_ops = &cifs_addr_ops;
+ break;
+ case S_IFDIR:
+ inode->i_op = &cifs_dir_inode_ops;
+ inode->i_fop = &cifs_dir_ops;
+ break;
+ case S_IFLNK:
+ inode->i_op = &cifs_symlink_inode_ops;
+ break;
+ default:
+ init_special_inode(inode, inode->i_mode, inode->i_rdev);
+ break;
+ }
+}
+
+static void cifs_unix_info_to_inode(struct inode *inode,
+ FILE_UNIX_BASIC_INFO *info, int force_uid_gid)
+{
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct cifsInodeInfo *cifsInfo = CIFS_I(inode);
+ __u64 num_of_bytes = le64_to_cpu(info->NumOfBytes);
+ __u64 end_of_file = le64_to_cpu(info->EndOfFile);
+
+ inode->i_atime = cifs_NTtimeToUnix(le64_to_cpu(info->LastAccessTime));
+ inode->i_mtime =
+ cifs_NTtimeToUnix(le64_to_cpu(info->LastModificationTime));
+ inode->i_ctime = cifs_NTtimeToUnix(le64_to_cpu(info->LastStatusChange));
+ inode->i_mode = le64_to_cpu(info->Permissions);
+
+ /*
+ * Since we set the inode type below we need to mask off
+ * to avoid strange results if bits set above.
+ */
+ inode->i_mode &= ~S_IFMT;
+ switch (le32_to_cpu(info->Type)) {
+ case UNIX_FILE:
+ inode->i_mode |= S_IFREG;
+ break;
+ case UNIX_SYMLINK:
+ inode->i_mode |= S_IFLNK;
+ break;
+ case UNIX_DIR:
+ inode->i_mode |= S_IFDIR;
+ break;
+ case UNIX_CHARDEV:
+ inode->i_mode |= S_IFCHR;
+ inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_BLOCKDEV:
+ inode->i_mode |= S_IFBLK;
+ inode->i_rdev = MKDEV(le64_to_cpu(info->DevMajor),
+ le64_to_cpu(info->DevMinor) & MINORMASK);
+ break;
+ case UNIX_FIFO:
+ inode->i_mode |= S_IFIFO;
+ break;
+ case UNIX_SOCKET:
+ inode->i_mode |= S_IFSOCK;
+ break;
+ default:
+ /* safest to call it a file if we do not know */
+ inode->i_mode |= S_IFREG;
+ cFYI(1, ("unknown type %d", le32_to_cpu(info->Type)));
+ break;
+ }
+
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) &&
+ !force_uid_gid)
+ inode->i_uid = cifs_sb->mnt_uid;
+ else
+ inode->i_uid = le64_to_cpu(info->Uid);
+
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) &&
+ !force_uid_gid)
+ inode->i_gid = cifs_sb->mnt_gid;
+ else
+ inode->i_gid = le64_to_cpu(info->Gid);
+
+ inode->i_nlink = le64_to_cpu(info->Nlinks);
+
+ spin_lock(&inode->i_lock);
+ if (is_size_safe_to_change(cifsInfo, end_of_file)) {
+ /*
+ * We can not safely change the file size here if the client
+ * is writing to it due to potential races.
+ */
+ i_size_write(inode, end_of_file);
+
+ /*
+ * i_blocks is not related to (i_size / i_blksize),
+ * but instead 512 byte (2**9) size is required for
+ * calculating num blocks.
+ */
+ inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
+ }
+ spin_unlock(&inode->i_lock);
+}
+
int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path, struct super_block *sb, int xid)
{
}
} else {
struct cifsInodeInfo *cifsInfo;
- __u32 type = le32_to_cpu(findData.Type);
__u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
__u64 end_of_file = le64_to_cpu(findData.EndOfFile);
/* this is ok to set on every inode revalidate */
atomic_set(&cifsInfo->inUse, 1);
- inode->i_atime =
- cifs_NTtimeToUnix(le64_to_cpu(findData.LastAccessTime));
- inode->i_mtime =
- cifs_NTtimeToUnix(le64_to_cpu
- (findData.LastModificationTime));
- inode->i_ctime =
- cifs_NTtimeToUnix(le64_to_cpu(findData.LastStatusChange));
- inode->i_mode = le64_to_cpu(findData.Permissions);
- /* since we set the inode type below we need to mask off
- to avoid strange results if bits set above */
- inode->i_mode &= ~S_IFMT;
- if (type == UNIX_FILE) {
- inode->i_mode |= S_IFREG;
- } else if (type == UNIX_SYMLINK) {
- inode->i_mode |= S_IFLNK;
- } else if (type == UNIX_DIR) {
- inode->i_mode |= S_IFDIR;
- } else if (type == UNIX_CHARDEV) {
- inode->i_mode |= S_IFCHR;
- inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
- le64_to_cpu(findData.DevMinor) & MINORMASK);
- } else if (type == UNIX_BLOCKDEV) {
- inode->i_mode |= S_IFBLK;
- inode->i_rdev = MKDEV(le64_to_cpu(findData.DevMajor),
- le64_to_cpu(findData.DevMinor) & MINORMASK);
- } else if (type == UNIX_FIFO) {
- inode->i_mode |= S_IFIFO;
- } else if (type == UNIX_SOCKET) {
- inode->i_mode |= S_IFSOCK;
- } else {
- /* safest to call it a file if we do not know */
- inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown type %d", type));
- }
+ cifs_unix_info_to_inode(inode, &findData, 0);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID)
- inode->i_uid = cifs_sb->mnt_uid;
- else
- inode->i_uid = le64_to_cpu(findData.Uid);
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID)
- inode->i_gid = cifs_sb->mnt_gid;
- else
- inode->i_gid = le64_to_cpu(findData.Gid);
-
- inode->i_nlink = le64_to_cpu(findData.Nlinks);
-
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, end_of_file);
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* This seems incredibly stupid but it turns out that i_blocks
- is not related to (i_size / i_blksize), instead 512 byte size
- is required for calculating num blocks */
-
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation */
- inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
- }
- spin_unlock(&inode->i_lock);
if (num_of_bytes < end_of_file)
cFYI(1, ("allocation size less than end of file"));
cFYI(1, ("Size %ld and blocks %llu",
(unsigned long) inode->i_size,
(unsigned long long)inode->i_blocks));
- if (S_ISREG(inode->i_mode)) {
- cFYI(1, ("File inode"));
- inode->i_op = &cifs_file_inode_ops;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- inode->i_fop =
- &cifs_file_direct_nobrl_ops;
- else
- inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- inode->i_fop = &cifs_file_nobrl_ops;
- else /* not direct, send byte range locks */
- inode->i_fop = &cifs_file_ops;
-
- /* check if server can support readpages */
- if (pTcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE)
- inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- inode->i_data.a_ops = &cifs_addr_ops;
- } else if (S_ISDIR(inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- inode->i_op = &cifs_dir_inode_ops;
- inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- inode->i_op = &cifs_symlink_inode_ops;
- /* tmp_inode->i_fop = */ /* do not need to set to anything */
- } else {
- cFYI(1, ("Init special inode"));
- init_special_inode(inode, inode->i_mode,
- inode->i_rdev);
- }
+
+ cifs_set_ops(inode);
}
return rc;
}
if (decode_sfu_inode(inode,
le64_to_cpu(pfindData->EndOfFile),
search_path,
- cifs_sb, xid)) {
+ cifs_sb, xid))
cFYI(1, ("Unrecognized sfu inode type"));
- }
+
cFYI(1, ("sfu mode 0%o", inode->i_mode));
} else {
inode->i_mode |= S_IFREG;
atomic_set(&cifsInfo->inUse, 1);
}
- if (S_ISREG(inode->i_mode)) {
- cFYI(1, ("File inode"));
- inode->i_op = &cifs_file_inode_ops;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- inode->i_fop =
- &cifs_file_direct_nobrl_ops;
- else
- inode->i_fop = &cifs_file_direct_ops;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- inode->i_fop = &cifs_file_nobrl_ops;
- else /* not direct, send byte range locks */
- inode->i_fop = &cifs_file_ops;
-
- if (pTcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE)
- inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- inode->i_data.a_ops = &cifs_addr_ops;
- } else if (S_ISDIR(inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- inode->i_op = &cifs_dir_inode_ops;
- inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- inode->i_op = &cifs_symlink_inode_ops;
- } else {
- init_special_inode(inode, inode->i_mode,
- inode->i_rdev);
- }
+ cifs_set_ops(inode);
}
kfree(buf);
return rc;
}
static void posix_fill_in_inode(struct inode *tmp_inode,
- FILE_UNIX_BASIC_INFO *pData, int *pobject_type, int isNewInode)
+ FILE_UNIX_BASIC_INFO *pData, int isNewInode)
{
+ struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
loff_t local_size;
struct timespec local_mtime;
- struct cifsInodeInfo *cifsInfo = CIFS_I(tmp_inode);
- struct cifs_sb_info *cifs_sb = CIFS_SB(tmp_inode->i_sb);
-
- __u32 type = le32_to_cpu(pData->Type);
- __u64 num_of_bytes = le64_to_cpu(pData->NumOfBytes);
- __u64 end_of_file = le64_to_cpu(pData->EndOfFile);
cifsInfo->time = jiffies;
atomic_inc(&cifsInfo->inUse);
local_mtime = tmp_inode->i_mtime;
local_size = tmp_inode->i_size;
- tmp_inode->i_atime =
- cifs_NTtimeToUnix(le64_to_cpu(pData->LastAccessTime));
- tmp_inode->i_mtime =
- cifs_NTtimeToUnix(le64_to_cpu(pData->LastModificationTime));
- tmp_inode->i_ctime =
- cifs_NTtimeToUnix(le64_to_cpu(pData->LastStatusChange));
-
- tmp_inode->i_mode = le64_to_cpu(pData->Permissions);
- /* since we set the inode type below we need to mask off type
- to avoid strange results if bits above were corrupt */
- tmp_inode->i_mode &= ~S_IFMT;
- if (type == UNIX_FILE) {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- } else if (type == UNIX_SYMLINK) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK;
- } else if (type == UNIX_DIR) {
- *pobject_type = DT_DIR;
- tmp_inode->i_mode |= S_IFDIR;
- } else if (type == UNIX_CHARDEV) {
- *pobject_type = DT_CHR;
- tmp_inode->i_mode |= S_IFCHR;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pData->DevMajor),
- le64_to_cpu(pData->DevMinor) & MINORMASK);
- } else if (type == UNIX_BLOCKDEV) {
- *pobject_type = DT_BLK;
- tmp_inode->i_mode |= S_IFBLK;
- tmp_inode->i_rdev = MKDEV(le64_to_cpu(pData->DevMajor),
- le64_to_cpu(pData->DevMinor) & MINORMASK);
- } else if (type == UNIX_FIFO) {
- *pobject_type = DT_FIFO;
- tmp_inode->i_mode |= S_IFIFO;
- } else if (type == UNIX_SOCKET) {
- *pobject_type = DT_SOCK;
- tmp_inode->i_mode |= S_IFSOCK;
- } else {
- /* safest to just call it a file */
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- cFYI(1, ("unknown inode type %d", type));
- }
-
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("object type: %d", type));
-#endif
- tmp_inode->i_uid = le64_to_cpu(pData->Uid);
- tmp_inode->i_gid = le64_to_cpu(pData->Gid);
- tmp_inode->i_nlink = le64_to_cpu(pData->Nlinks);
-
- spin_lock(&tmp_inode->i_lock);
- if (is_size_safe_to_change(cifsInfo, end_of_file)) {
- /* can not safely change the file size here if the
- client is writing to it due to potential races */
- i_size_write(tmp_inode, end_of_file);
+ cifs_unix_info_to_inode(tmp_inode, pData, 1);
+ cifs_set_ops(tmp_inode);
- /* 512 bytes (2**9) is the fake blocksize that must be used */
- /* for this calculation, not the real blocksize */
- tmp_inode->i_blocks = (512 - 1 + num_of_bytes) >> 9;
- }
- spin_unlock(&tmp_inode->i_lock);
-
- if (S_ISREG(tmp_inode->i_mode)) {
- cFYI(1, ("File inode"));
- tmp_inode->i_op = &cifs_file_inode_ops;
-
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) {
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_direct_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_direct_ops;
+ if (!S_ISREG(tmp_inode->i_mode))
+ return;
- } else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
- tmp_inode->i_fop = &cifs_file_nobrl_ops;
- else
- tmp_inode->i_fop = &cifs_file_ops;
-
- if ((cifs_sb->tcon) && (cifs_sb->tcon->ses) &&
- (cifs_sb->tcon->ses->server->maxBuf <
- PAGE_CACHE_SIZE + MAX_CIFS_HDR_SIZE))
- tmp_inode->i_data.a_ops = &cifs_addr_ops_smallbuf;
- else
- tmp_inode->i_data.a_ops = &cifs_addr_ops;
-
- if (isNewInode)
- return; /* No sense invalidating pages for new inode
- since we we have not started caching
- readahead file data yet */
+ /*
+ * No sense invalidating pages for new inode
+ * since we we have not started caching
+ * readahead file data yet.
+ */
+ if (isNewInode)
+ return;
- if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
- (local_size == tmp_inode->i_size)) {
- cFYI(1, ("inode exists but unchanged"));
- } else {
- /* file may have changed on server */
- cFYI(1, ("invalidate inode, readdir detected change"));
- invalidate_remote_inode(tmp_inode);
- }
- } else if (S_ISDIR(tmp_inode->i_mode)) {
- cFYI(1, ("Directory inode"));
- tmp_inode->i_op = &cifs_dir_inode_ops;
- tmp_inode->i_fop = &cifs_dir_ops;
- } else if (S_ISLNK(tmp_inode->i_mode)) {
- cFYI(1, ("Symbolic Link inode"));
- tmp_inode->i_op = &cifs_symlink_inode_ops;
-/* tmp_inode->i_fop = *//* do not need to set to anything */
+ if (timespec_equal(&tmp_inode->i_mtime, &local_mtime) &&
+ (local_size == tmp_inode->i_size)) {
+ cFYI(1, ("inode exists but unchanged"));
} else {
- cFYI(1, ("Special inode"));
- init_special_inode(tmp_inode, tmp_inode->i_mode,
- tmp_inode->i_rdev);
+ /* file may have changed on server */
+ cFYI(1, ("invalidate inode, readdir detected change"));
+ invalidate_remote_inode(tmp_inode);
}
}
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
- int obj_type;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
/* we already checked in POSIXCreate whether
frame was long enough */
posix_fill_in_inode(direntry->d_inode,
- pInfo, &obj_type, 1 /* NewInode */);
+ pInfo, 1 /* NewInode */);
#ifdef CONFIG_CIFS_DEBUG2
cFYI(1, ("instantiated dentry %p %s to inode %p",
direntry, direntry->d_name.name, newinode));
} /* if we can not get memory just leave rc as EEXIST */
}
- if (rc) {
+ if (rc)
cFYI(1, ("rename rc %d", rc));
- }
if ((rc == -EIO) || (rc == -EEXIST)) {
int oplock = FALSE;
#define CIFS_IOC_CHECKUMOUNT _IO(0xCF, 2)
-int cifs_ioctl (struct inode *inode, struct file *filep,
+int cifs_ioctl(struct inode *inode, struct file *filep,
unsigned int command, unsigned long arg)
{
int rc = -ENOTTY; /* strange error - but the precedent */
/* this applies md4 to 64 byte chunks */
static void
-mdfour64(__u32 * M, __u32 * A, __u32 *B, __u32 * C, __u32 *D)
+mdfour64(__u32 *M, __u32 *A, __u32 *B, __u32 *C, __u32 *D)
{
int j;
__u32 AA, BB, CC, DD;
}
static void
-copy64(__u32 * M, unsigned char *in)
+copy64(__u32 *M, unsigned char *in)
{
int i;
/* This is the central step in the MD5 algorithm. */
#define MD5STEP(f, w, x, y, z, data, s) \
- ( w += f(x, y, z) + data, w = w<<s | w>>(32-s), w += x )
+ (w += f(x, y, z) + data, w = w<<s | w>>(32-s), w += x)
/*
* The core of the MD5 algorithm, this alters an existing MD5 hash to
int i;
/* if key is longer than 64 bytes truncate it */
- if (key_len > 64) {
+ if (key_len > 64)
key_len = 64;
- }
/* start out by storing key in pads */
memset(ctx->k_ipad, 0, sizeof(ctx->k_ipad));
{
struct HMACMD5Context ctx;
hmac_md5_init_limK_to_64(key, 16, &ctx);
- if (data_len != 0) {
+ if (data_len != 0)
hmac_md5_update(data, data_len, &ctx);
- }
+
hmac_md5_final(digest, &ctx);
}
#endif
/*
* fs/cifs/misc.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
if (treeCon->ses) {
if (treeCon->ses->capabilities & CAP_UNICODE)
buffer->Flags2 |= SMBFLG2_UNICODE;
- if (treeCon->ses->capabilities & CAP_STATUS32) {
+ if (treeCon->ses->capabilities & CAP_STATUS32)
buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- }
+
/* Uid is not converted */
buffer->Uid = treeCon->ses->Suid;
buffer->Mid = GetNextMid(treeCon->ses->server);
buffer = (unsigned char *) smb_buf;
for (i = 0, j = 0; i < smb_buf_length; i++, j++) {
- if (i % 8 == 0) { /* have reached the beginning of line */
+ if (i % 8 == 0) {
+ /* have reached the beginning of line */
printk(KERN_DEBUG "| ");
j = 0;
}
else
debug_line[1 + (2 * j)] = '_';
- if (i % 8 == 7) { /* reached end of line, time to print ascii */
+ if (i % 8 == 7) {
+ /* reached end of line, time to print ascii */
debug_line[16] = 0;
printk(" | %s\n", debug_line);
}
debug_line[2 * j] = ' ';
debug_line[1 + (2 * j)] = ' ';
}
- printk( " | %s\n", debug_line);
+ printk(" | %s\n", debug_line);
return;
}
/*
* fs/cifs/netmisc.c
*
- * Copyright (c) International Business Machines Corp., 2002
+ * Copyright (c) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Error mapping routines from Samba libsmb/errormap.c
if (cp[i] == '\\')
break;
if (cp[i] == '/') {
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("change slash to backslash in malformed UNC"));
-#endif
+ cFYI(DBG2, ("change slash to \\ in malformed UNC"));
cp[i] = '\\';
return 1;
}
} else if (address_family == AF_INET6) {
ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
}
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("address conversion returned %d for %s", ret, cp));
-#endif
+ cFYI(DBG2, ("address conversion returned %d for %s", ret, cp));
if (ret > 0)
ret = 1;
return ret;
ERRDOS, 87, NT_STATUS_INVALID_PARAMETER_MIX}, {
ERRHRD, ERRgeneral, NT_STATUS_INVALID_QUOTA_LOWER}, {
ERRHRD, ERRgeneral, NT_STATUS_DISK_CORRUPT_ERROR}, {
- ERRDOS, ERRbadfile, NT_STATUS_OBJECT_NAME_INVALID}, { /* mapping changed since shell does lookup on * and expects file not found */
+ /* mapping changed since shell does lookup on * expects FileNotFound */
+ ERRDOS, ERRbadfile, NT_STATUS_OBJECT_NAME_INVALID}, {
ERRDOS, ERRbadfile, NT_STATUS_OBJECT_NAME_NOT_FOUND}, {
ERRDOS, ERRalreadyexists, NT_STATUS_OBJECT_NAME_COLLISION}, {
ERRHRD, ERRgeneral, NT_STATUS_HANDLE_NOT_WAITABLE}, {
/* old style errors */
/* DOS class smb error codes - map DOS */
- if (smberrclass == ERRDOS) { /* 1 byte field no need to byte reverse */
+ if (smberrclass == ERRDOS) {
+ /* 1 byte field no need to byte reverse */
for (i = 0;
i <
sizeof(mapping_table_ERRDOS) /
}
/* else try next error mapping one to see if match */
}
- } else if (smberrclass == ERRSRV) { /* server class of error codes */
+ } else if (smberrclass == ERRSRV) {
+ /* server class of error codes */
for (i = 0;
i <
sizeof(mapping_table_ERRSRV) /
{
struct timespec ts;
int sec, min, days, month, year;
- SMB_TIME * st = (SMB_TIME *)&time;
- SMB_DATE * sd = (SMB_DATE *)&date;
+ SMB_TIME *st = (SMB_TIME *)&time;
+ SMB_DATE *sd = (SMB_DATE *)&date;
cFYI(1, ("date %d time %d", date, time));
*
* Directory search handling
*
- * Copyright (C) International Business Machines Corp., 2004, 2007
+ * Copyright (C) International Business Machines Corp., 2004, 2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
cFYI(1, ("empty cifs private file data"));
return;
}
- if (cf->invalidHandle) {
+ if (cf->invalidHandle)
cFYI(1, ("invalid handle"));
- }
- if (cf->srch_inf.endOfSearch) {
+ if (cf->srch_inf.endOfSearch)
cFYI(1, ("end of search"));
- }
- if (cf->srch_inf.emptyDir) {
+ if (cf->srch_inf.emptyDir)
cFYI(1, ("empty dir"));
- }
}
}
+#else
+static inline void dump_cifs_file_struct(struct file *file, char *label)
+{
+}
#endif /* DEBUG2 */
/* Returns one if new inode created (which therefore needs to be hashed) */
cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
} else { /* legacy, OS2 and DOS style */
/* struct timespec ts;*/
- FIND_FILE_STANDARD_INFO * pfindData =
+ FIND_FILE_STANDARD_INFO *pfindData =
(FIND_FILE_STANDARD_INFO *)buf;
tmp_inode->i_mtime = cnvrtDosUnixTm(
if (attr & ATTR_DIRECTORY) {
*pobject_type = DT_DIR;
/* override default perms since we do not lock dirs */
- if (atomic_read(&cifsInfo->inUse) == 0) {
+ if (atomic_read(&cifsInfo->inUse) == 0)
tmp_inode->i_mode = cifs_sb->mnt_dir_mode;
- }
tmp_inode->i_mode |= S_IFDIR;
} else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
(attr & ATTR_SYSTEM)) {
} /* could add code here - to validate if device or weird share type? */
/* can not fill in nlink here as in qpathinfo version and Unx search */
- if (atomic_read(&cifsInfo->inUse) == 0) {
+ if (atomic_read(&cifsInfo->inUse) == 0)
atomic_set(&cifsInfo->inUse, 1);
- }
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
full_path = build_path_from_dentry(file->f_path.dentry);
- if (full_path == NULL) {
+ if (full_path == NULL)
return -ENOMEM;
- }
cFYI(1, ("Full path: %s start at: %lld", full_path, file->f_pos));
/* test for Unix extensions */
/* but now check for them on the share/mount not on the SMB session */
/* if (pTcon->ses->capabilities & CAP_UNIX) { */
- if (pTcon->unix_ext) {
+ if (pTcon->unix_ext)
cifsFile->srch_inf.info_level = SMB_FIND_FILE_UNIX;
- } else if ((pTcon->ses->capabilities &
+ else if ((pTcon->ses->capabilities &
(CAP_NT_SMBS | CAP_NT_FIND)) == 0) {
cifsFile->srch_inf.info_level = SMB_FIND_FILE_INFO_STANDARD;
} else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
static char *nxt_dir_entry(char *old_entry, char *end_of_smb, int level)
{
char *new_entry;
- FILE_DIRECTORY_INFO * pDirInfo = (FILE_DIRECTORY_INFO *)old_entry;
+ FILE_DIRECTORY_INFO *pDirInfo = (FILE_DIRECTORY_INFO *)old_entry;
if (level == SMB_FIND_FILE_INFO_STANDARD) {
- FIND_FILE_STANDARD_INFO * pfData;
+ FIND_FILE_STANDARD_INFO *pfData;
pfData = (FIND_FILE_STANDARD_INFO *)pDirInfo;
new_entry = old_entry + sizeof(FIND_FILE_STANDARD_INFO) +
int len = 0;
if (cfile->srch_inf.info_level == SMB_FIND_FILE_UNIX) {
- FILE_UNIX_INFO * pFindData = (FILE_UNIX_INFO *)current_entry;
+ FILE_UNIX_INFO *pFindData = (FILE_UNIX_INFO *)current_entry;
filename = &pFindData->FileName[0];
if (cfile->srch_inf.unicode) {
len = cifs_unicode_bytelen(filename);
len = strnlen(filename, 5);
}
} else if (cfile->srch_inf.info_level == SMB_FIND_FILE_DIRECTORY_INFO) {
- FILE_DIRECTORY_INFO * pFindData =
+ FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
} else if (cfile->srch_inf.info_level ==
SMB_FIND_FILE_FULL_DIRECTORY_INFO) {
- FILE_FULL_DIRECTORY_INFO * pFindData =
+ FILE_FULL_DIRECTORY_INFO *pFindData =
(FILE_FULL_DIRECTORY_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
} else if (cfile->srch_inf.info_level ==
SMB_FIND_FILE_ID_FULL_DIR_INFO) {
- SEARCH_ID_FULL_DIR_INFO * pFindData =
+ SEARCH_ID_FULL_DIR_INFO *pFindData =
(SEARCH_ID_FULL_DIR_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
} else if (cfile->srch_inf.info_level ==
SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
- FILE_BOTH_DIRECTORY_INFO * pFindData =
+ FILE_BOTH_DIRECTORY_INFO *pFindData =
(FILE_BOTH_DIRECTORY_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
} else if (cfile->srch_inf.info_level == SMB_FIND_FILE_INFO_STANDARD) {
- FIND_FILE_STANDARD_INFO * pFindData =
+ FIND_FILE_STANDARD_INFO *pFindData =
(FIND_FILE_STANDARD_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = pFindData->FileNameLength;
. and .. for the root of a drive and for those we need
to start two entries earlier */
-#ifdef CONFIG_CIFS_DEBUG2
dump_cifs_file_struct(file, "In fce ");
-#endif
if (((index_to_find < cifsFile->srch_inf.index_of_last_entry) &&
is_dir_changed(file)) ||
(index_to_find < first_entry_in_buffer)) {
pos_in_buf = index_to_find - first_entry_in_buffer;
cFYI(1, ("found entry - pos_in_buf %d", pos_in_buf));
- for (i=0; (i < (pos_in_buf)) && (current_entry != NULL); i++) {
+ for (i = 0; (i < (pos_in_buf)) && (current_entry != NULL); i++) {
/* go entry by entry figuring out which is first */
current_entry = nxt_dir_entry(current_entry, end_of_smb,
cifsFile->srch_inf.info_level);
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
} else if (level == SMB_FIND_FILE_INFO_STANDARD) {
- FIND_FILE_STANDARD_INFO * pFindData =
+ FIND_FILE_STANDARD_INFO *pFindData =
(FIND_FILE_STANDARD_INFO *)current_entry;
filename = &pFindData->FileName[0];
/* one byte length, no name conversion */
level = cifsFile->srch_inf.info_level;
if (level == SMB_FIND_FILE_UNIX) {
- FILE_UNIX_INFO * pFindData = (FILE_UNIX_INFO *)current_entry;
+ FILE_UNIX_INFO *pFindData = (FILE_UNIX_INFO *)current_entry;
filename = &pFindData->FileName[0];
if (cifsFile->srch_inf.unicode) {
calc_lanman_hash(ses, lnm_session_key);
ses->flags |= CIFS_SES_LANMAN;
-/* #ifdef CONFIG_CIFS_DEBUG2
- cifs_dump_mem("cryptkey: ",ses->server->cryptKey,
- CIFS_SESS_KEY_SIZE);
-#endif */
memcpy(bcc_ptr, (char *)lnm_session_key, CIFS_SESS_KEY_SIZE);
bcc_ptr += CIFS_SESS_KEY_SIZE;
{{14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7},
{0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8},
{4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0},
- {15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13}},
+ {15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13} },
{{15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10},
{3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5},
{0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15},
- {13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9}},
+ {13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9} },
{{10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8},
{13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1},
{13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7},
- {1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12}},
+ {1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12} },
{{7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15},
{13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9},
{10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4},
- {3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14}},
+ {3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14} },
{{2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9},
{14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6},
{4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14},
- {11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3}},
+ {11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3} },
{{12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11},
{10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8},
{9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6},
- {4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13}},
+ {4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13} },
{{4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1},
{13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6},
{1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2},
- {6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12}},
+ {6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12} },
{{13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7},
{1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2},
{7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8},
- {2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11}}
+ {2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11} }
};
static void
key[5] = ((str[4] & 0x1F) << 2) | (str[5] >> 6);
key[6] = ((str[5] & 0x3F) << 1) | (str[6] >> 7);
key[7] = str[6] & 0x7F;
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 8; i++)
key[i] = (key[i] << 1);
- }
}
static void
dohash(outb, inb, keyb, forw);
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 8; i++)
out[i] = 0;
- }
for (i = 0; i < 64; i++) {
if (outb[i])
/*
* fs/cifs/transport.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
* Jeremy Allison (jra@samba.org) 2006.
*
} else if (ses->status != CifsGood) {
/* check if SMB session is bad because we are setting it up */
if ((in_buf->Command != SMB_COM_SESSION_SETUP_ANDX) &&
- (in_buf->Command != SMB_COM_NEGOTIATE)) {
+ (in_buf->Command != SMB_COM_NEGOTIATE))
return -EAGAIN;
- } /* else ok - we are setting up session */
+ /* else ok - we are setting up session */
}
*ppmidQ = AllocMidQEntry(in_buf, ses);
if (*ppmidQ == NULL)
iov[0].iov_len = in_buf->smb_buf_length + 4;
flags |= CIFS_NO_RESP;
rc = SendReceive2(xid, ses, iov, 1, &resp_buf_type, flags);
-#ifdef CONFIG_CIFS_DEBUG2
- cFYI(1, ("SendRcvNoR flags %d rc %d", flags, rc));
-#endif
+ cFYI(DBG2, ("SendRcvNoRsp flags %d rc %d", flags, rc));
+
return rc;
}
} else if (strncmp(ea_name, CIFS_XATTR_USER_PREFIX, 5) == 0) {
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
goto set_ea_exit;
- if (strncmp(ea_name, CIFS_XATTR_DOS_ATTRIB, 14) == 0) {
+ if (strncmp(ea_name, CIFS_XATTR_DOS_ATTRIB, 14) == 0)
cFYI(1, ("attempt to set cifs inode metadata"));
- }
+
ea_name += 5; /* skip past user. prefix */
rc = CIFSSMBSetEA(xid, pTcon, full_path, ea_name, ea_value,
(__u16)value_size, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
#ifdef CONFIG_CIFS_EXPERIMENTAL
- else if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
__u16 fid;
int oplock = FALSE;
struct cifs_ntsd *pacl = NULL;
} else if (strncmp(ea_name,
CIFS_XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN) == 0) {
cFYI(1, ("Security xattr namespace not supported yet"));
- } else {
+ } else
cFYI(1,
("illegal xattr request %s (only user namespace supported)",
ea_name));
- }
/* We could add an additional check for streams ie
if proc/fs/cifs/streamstoxattr is set then
#define DEBUGFS_MAGIC 0x64626720
-/* declared over in file.c */
-extern struct file_operations debugfs_file_operations;
-extern struct inode_operations debugfs_link_operations;
-
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
return 0;
}
-/* This function must zero any hole we create */
+/**
+ * ecryptfs_prepare_write
+ * @file: The eCryptfs file
+ * @page: The eCryptfs page
+ * @from: The start byte from which we will write
+ * @to: The end byte to which we will write
+ *
+ * This function must zero any hole we create
+ *
+ * Returns zero on success; non-zero otherwise
+ */
static int ecryptfs_prepare_write(struct file *file, struct page *page,
unsigned from, unsigned to)
{
- int rc = 0;
loff_t prev_page_end_size;
+ int rc = 0;
if (!PageUptodate(page)) {
- rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
- PAGE_CACHE_SIZE,
- page->mapping->host);
- if (rc) {
- printk(KERN_ERR "%s: Error attemping to read lower "
- "page segment; rc = [%d]\n", __FUNCTION__, rc);
- ClearPageUptodate(page);
- goto out;
- } else
+ struct ecryptfs_crypt_stat *crypt_stat =
+ &ecryptfs_inode_to_private(
+ file->f_path.dentry->d_inode)->crypt_stat;
+
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+ || (crypt_stat->flags & ECRYPTFS_NEW_FILE)) {
+ rc = ecryptfs_read_lower_page_segment(
+ page, page->index, 0, PAGE_CACHE_SIZE,
+ page->mapping->host);
+ if (rc) {
+ printk(KERN_ERR "%s: Error attemping to read "
+ "lower page segment; rc = [%d]\n",
+ __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ } else
+ SetPageUptodate(page);
+ } else if (crypt_stat->flags & ECRYPTFS_VIEW_AS_ENCRYPTED) {
+ if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR) {
+ rc = ecryptfs_copy_up_encrypted_with_header(
+ page, crypt_stat);
+ if (rc) {
+ printk(KERN_ERR "%s: Error attempting "
+ "to copy the encrypted content "
+ "from the lower file whilst "
+ "inserting the metadata from "
+ "the xattr into the header; rc "
+ "= [%d]\n", __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
+ SetPageUptodate(page);
+ } else {
+ rc = ecryptfs_read_lower_page_segment(
+ page, page->index, 0, PAGE_CACHE_SIZE,
+ page->mapping->host);
+ if (rc) {
+ printk(KERN_ERR "%s: Error reading "
+ "page; rc = [%d]\n",
+ __FUNCTION__, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
+ SetPageUptodate(page);
+ }
+ } else {
+ rc = ecryptfs_decrypt_page(page);
+ if (rc) {
+ printk(KERN_ERR "%s: Error decrypting page "
+ "at index [%ld]; rc = [%d]\n",
+ __FUNCTION__, page->index, rc);
+ ClearPageUptodate(page);
+ goto out;
+ }
SetPageUptodate(page);
+ }
}
-
prev_page_end_size = ((loff_t)page->index << PAGE_CACHE_SHIFT);
-
- /*
- * If creating a page or more of holes, zero them out via truncate.
- * Note, this will increase i_size.
- */
+ /* If creating a page or more of holes, zero them out via truncate.
+ * Note, this will increase i_size. */
if (page->index != 0) {
if (prev_page_end_size > i_size_read(page->mapping->host)) {
rc = ecryptfs_truncate(file->f_path.dentry,
prev_page_end_size);
if (rc) {
- printk(KERN_ERR "Error on attempt to "
+ printk(KERN_ERR "%s: Error on attempt to "
"truncate to (higher) offset [%lld];"
- " rc = [%d]\n", prev_page_end_size, rc);
+ " rc = [%d]\n", __FUNCTION__,
+ prev_page_end_size, rc);
goto out;
}
}
}
- /*
- * Writing to a new page, and creating a small hole from start of page?
- * Zero it out.
- */
- if ((i_size_read(page->mapping->host) == prev_page_end_size) &&
- (from != 0)) {
+ /* Writing to a new page, and creating a small hole from start
+ * of page? Zero it out. */
+ if ((i_size_read(page->mapping->host) == prev_page_end_size)
+ && (from != 0))
zero_user(page, 0, PAGE_CACHE_SIZE);
- }
out:
return rc;
}
return NULL;
if (write) {
- struct rlimit *rlim = current->signal->rlim;
unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
+ struct rlimit *rlim;
+
+ /*
+ * We've historically supported up to 32 pages (ARG_MAX)
+ * of argument strings even with small stacks
+ */
+ if (size <= ARG_MAX)
+ return page;
/*
* Limit to 1/4-th the stack size for the argv+env strings.
* - the program will have a reasonable amount of stack left
* to work from.
*/
+ rlim = current->signal->rlim;
if (size > rlim[RLIMIT_STACK].rlim_cur / 4) {
put_page(page);
return NULL;
{Opt_quota, "quota"},
{Opt_usrquota, "usrquota"},
{Opt_barrier, "barrier=%u"},
- {Opt_err, NULL},
{Opt_resize, "resize"},
+ {Opt_err, NULL},
};
static ext3_fsblk_t get_sb_block(void **data)
/**
- * int journal_restart() - restart a handle .
+ * int journal_restart() - restart a handle.
* @handle: handle to restart
* @nblocks: nr credits requested
*
}
/**
- * int journal_get_undo_access() - Notify intent to modify metadata with
- * non-rewindable consequences
+ * int journal_get_undo_access() - Notify intent to modify metadata with non-rewindable consequences
* @handle: transaction
* @bh: buffer to undo
* @credits: store the number of taken credits here (if not NULL)
}
/**
- * int journal_dirty_data() - mark a buffer as containing dirty data which
- * needs to be flushed before we can commit the
- * current transaction.
+ * int journal_dirty_data() - mark a buffer as containing dirty data to be flushed
* @handle: transaction
* @bh: bufferhead to mark
*
+ * Description:
+ * Mark a buffer as containing dirty data which needs to be flushed before
+ * we can commit the current transaction.
+ *
* The buffer is placed on the transaction's data list and is marked as
* belonging to the transaction.
*
}
/**
- * int journal_dirty_metadata() - mark a buffer as containing dirty metadata
+ * int journal_dirty_metadata() - mark a buffer as containing dirty metadata
* @handle: transaction to add buffer to.
* @bh: buffer to mark
*
- * mark dirty metadata which needs to be journaled as part of the current
+ * Mark dirty metadata which needs to be journaled as part of the current
* transaction.
*
* The buffer is placed on the transaction's metadata list and is marked
}
/**
- * mpage_readpages - populate an address space with some pages, and
- * start reads against them.
- *
+ * mpage_readpages - populate an address space with some pages & start reads against them
* @mapping: the address_space
* @pages: The address of a list_head which contains the target pages. These
* pages have their ->index populated and are otherwise uninitialised.
- *
* The page at @pages->prev has the lowest file offset, and reads should be
* issued in @pages->prev to @pages->next order.
- *
* @nr_pages: The number of pages at *@pages
* @get_block: The filesystem's block mapper function.
*
* So an mpage read of the first 16 blocks of an ext2 file will cause I/O to be
* submitted in the following order:
* 12 0 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16
+ *
* because the indirect block has to be read to get the mappings of blocks
* 13,14,15,16. Obviously, this impacts performance.
*
}
/**
- * mpage_writepages - walk the list of dirty pages of the given
- * address space and writepage() all of them.
- *
+ * mpage_writepages - walk the list of dirty pages of the given address space & writepage() all of them
* @mapping: address space structure to write
* @wbc: subtract the number of written pages from *@wbc->nr_to_write
* @get_block: the filesystem's block mapper function.
*/
#include <linux/mount.h>
+#include <linux/security.h>
struct nfs_string;
char *export_path;
int protocol;
} nfs_server;
+
+ struct security_mnt_opts lsm_opts;
};
/* client.c */
static int nfs_parse_mount_options(char *raw,
struct nfs_parsed_mount_data *mnt)
{
- char *p, *string;
+ char *p, *string, *secdata;
unsigned short port = 0;
+ int rc;
if (!raw) {
dfprintk(MOUNT, "NFS: mount options string was NULL.\n");
}
dfprintk(MOUNT, "NFS: nfs mount opts='%s'\n", raw);
+ secdata = alloc_secdata();
+ if (!secdata)
+ goto out_nomem;
+
+ rc = security_sb_copy_data(raw, secdata);
+ if (rc)
+ goto out_security_failure;
+
+ rc = security_sb_parse_opts_str(secdata, &mnt->lsm_opts);
+ if (rc)
+ goto out_security_failure;
+
+ free_secdata(secdata);
+
while ((p = strsep(&raw, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
int option, token;
out_nomem:
printk(KERN_INFO "NFS: not enough memory to parse option\n");
return 0;
-
+out_security_failure:
+ free_secdata(secdata);
+ printk(KERN_INFO "NFS: security options invalid: %d\n", rc);
+ return 0;
out_unrec_vers:
printk(KERN_INFO "NFS: unrecognized NFS version number\n");
return 0;
args->namlen = data->namlen;
args->bsize = data->bsize;
args->auth_flavors[0] = data->pseudoflavor;
+
+ /*
+ * The legacy version 6 binary mount data from userspace has a
+ * field used only to transport selinux information into the
+ * the kernel. To continue to support that functionality we
+ * have a touch of selinux knowledge here in the NFS code. The
+ * userspace code converted context=blah to just blah so we are
+ * converting back to the full string selinux understands.
+ */
+ if (data->context[0]){
+#ifdef CONFIG_SECURITY_SELINUX
+ int rc;
+ char *opts_str = kmalloc(sizeof(data->context) + 8, GFP_KERNEL);
+ if (!opts_str)
+ return -ENOMEM;
+ strcpy(opts_str, "context=");
+ data->context[NFS_MAX_CONTEXT_LEN] = '\0';
+ strcat(opts_str, &data->context[0]);
+ rc = security_sb_parse_opts_str(opts_str, &args->lsm_opts);
+ kfree(opts_str);
+ if (rc)
+ return rc;
+#else
+ return -EINVAL;
+#endif
+ }
+
break;
default: {
unsigned int len;
};
int error;
+ security_init_mnt_opts(&data.lsm_opts);
+
/* Validate the mount data */
error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name);
if (error < 0)
goto error_splat_super;
}
+ error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ if (error)
+ goto error_splat_root;
+
s->s_flags |= MS_ACTIVE;
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
out:
kfree(data.nfs_server.hostname);
kfree(data.mount_server.hostname);
+ security_free_mnt_opts(&data.lsm_opts);
return error;
out_err_nosb:
nfs_free_server(server);
goto out;
+error_splat_root:
+ dput(mntroot);
error_splat_super:
up_write(&s->s_umount);
deactivate_super(s);
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ /* clone any lsm security options from the parent to the new sb */
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs_xdev_get_sb() = 0\n");
return 0;
};
int error;
+ security_init_mnt_opts(&data.lsm_opts);
+
/* Validate the mount data */
error = nfs4_validate_mount_data(raw_data, &data, dev_name);
if (error < 0)
kfree(data.client_address);
kfree(data.nfs_server.export_path);
kfree(data.nfs_server.hostname);
+ security_free_mnt_opts(&data.lsm_opts);
return error;
out_free:
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
BUG_ON(!PageLocked(page));
- BUG_ON(!OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL);
+ BUG_ON(!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL));
ret = ocfs2_read_block(osb, OCFS2_I(inode)->ip_blkno, &di_bh,
OCFS2_BH_CACHED, inode);
goto bail;
}
if (pde)
- pde->rec_len =
- cpu_to_le16(le16_to_cpu(pde->rec_len) +
- le16_to_cpu(de->rec_len));
+ le16_add_cpu(&pde->rec_len,
+ le16_to_cpu(de->rec_len));
else
de->inode = 0;
dir->i_version++;
* can periodically run all locks owned by this node
* and re-assert across the cluster...
*/
-int dlm_do_assert_master(struct dlm_ctxt *dlm,
- struct dlm_lock_resource *res,
- void *nodemap, u32 flags)
+static int dlm_do_assert_master(struct dlm_ctxt *dlm,
+ struct dlm_lock_resource *res,
+ void *nodemap, u32 flags)
{
struct dlm_assert_master assert;
int to, tmpret;
inode = ocfs2_lock_res_inode(lockres);
mapping = inode->i_mapping;
- if (S_ISREG(inode->i_mode))
+ if (!S_ISREG(inode->i_mode))
goto out;
/*
return UNBLOCK_CONTINUE_POST;
}
-void ocfs2_process_blocked_lock(struct ocfs2_super *osb,
- struct ocfs2_lock_res *lockres)
+static void ocfs2_process_blocked_lock(struct ocfs2_super *osb,
+ struct ocfs2_lock_res *lockres)
{
int status;
struct ocfs2_unblock_ctl ctl = {0, 0,};
return should_wake;
}
-int ocfs2_downconvert_thread(void *arg)
+static int ocfs2_downconvert_thread(void *arg)
{
int status = 0;
struct ocfs2_super *osb = arg;
struct ocfs2_lock_res *lockres);
/* for the downconvert thread */
-void ocfs2_process_blocked_lock(struct ocfs2_super *osb,
- struct ocfs2_lock_res *lockres);
void ocfs2_wake_downconvert_thread(struct ocfs2_super *osb);
struct ocfs2_dlm_debug *ocfs2_new_dlm_debug(void);
static inline void __ocfs2_node_map_clear_bit(struct ocfs2_node_map *map,
int bit);
static inline int __ocfs2_node_map_is_empty(struct ocfs2_node_map *map);
-static void __ocfs2_node_map_dup(struct ocfs2_node_map *target,
- struct ocfs2_node_map *from);
-static void __ocfs2_node_map_set(struct ocfs2_node_map *target,
- struct ocfs2_node_map *from);
+
+/* special case -1 for now
+ * TODO: should *really* make sure the calling func never passes -1!! */
+static void ocfs2_node_map_init(struct ocfs2_node_map *map)
+{
+ map->num_nodes = OCFS2_NODE_MAP_MAX_NODES;
+ memset(map->map, 0, BITS_TO_LONGS(OCFS2_NODE_MAP_MAX_NODES) *
+ sizeof(unsigned long));
+}
void ocfs2_init_node_maps(struct ocfs2_super *osb)
{
mlog_errno(ret);
}
-/* special case -1 for now
- * TODO: should *really* make sure the calling func never passes -1!! */
-void ocfs2_node_map_init(struct ocfs2_node_map *map)
-{
- map->num_nodes = OCFS2_NODE_MAP_MAX_NODES;
- memset(map->map, 0, BITS_TO_LONGS(OCFS2_NODE_MAP_MAX_NODES) *
- sizeof(unsigned long));
-}
-
static inline void __ocfs2_node_map_set_bit(struct ocfs2_node_map *map,
int bit)
{
return ret;
}
+#if 0
+
static void __ocfs2_node_map_dup(struct ocfs2_node_map *target,
struct ocfs2_node_map *from)
{
target->map[i] = from->map[i];
}
+#endif /* 0 */
+
/* Returns whether the recovery bit was actually set - it may not be
* if a node is still marked as needing recovery */
int ocfs2_recovery_map_set(struct ocfs2_super *osb,
/* node map functions - used to keep track of mounted and in-recovery
* nodes. */
-void ocfs2_node_map_init(struct ocfs2_node_map *map);
int ocfs2_node_map_is_empty(struct ocfs2_super *osb,
struct ocfs2_node_map *map);
void ocfs2_node_map_set_bit(struct ocfs2_super *osb,
int num);
void ocfs2_recovery_map_clear(struct ocfs2_super *osb,
int num);
-/* returns 1 if bit is the only bit set in target, 0 otherwise */
-int ocfs2_node_map_is_only(struct ocfs2_super *osb,
- struct ocfs2_node_map *target,
- int bit);
#endif /* OCFS2_HEARTBEAT_H */
mlog_entry_void();
- if (ocfs2_mount_local(osb))
- goto bail;
-
if (osb->local_alloc_size == 0)
goto bail;
while(bits_wanted--)
ocfs2_set_bit(start++, bitmap);
- alloc->id1.bitmap1.i_used = cpu_to_le32(*num_bits +
- le32_to_cpu(alloc->id1.bitmap1.i_used));
+ le32_add_cpu(&alloc->id1.bitmap1.i_used, *num_bits);
status = ocfs2_journal_dirty(handle, osb->local_alloc_bh);
if (status < 0) {
#include <linux/interrupt.h>
#include <linux/swap.h>
#include <linux/slab.h>
+#include <linux/genhd.h>
#include <linux/smp.h>
#include <linux/signal.h>
#include <linux/module.h>
#endif
#ifdef CONFIG_BLOCK
-extern const struct seq_operations partitions_op;
static int partitions_open(struct inode *inode, struct file *file)
{
return seq_open(file, &partitions_op);
.release = seq_release,
};
-extern const struct seq_operations diskstats_op;
static int diskstats_open(struct inode *inode, struct file *file)
{
return seq_open(file, &diskstats_op);
return -EXDEV;
}
/* We must not pack tails for quota files on reiserfs for quota IO to work */
- if (!REISERFS_I(nd.path.dentry->d_inode)->i_flags & i_nopack_mask) {
+ if (!(REISERFS_I(nd.path.dentry->d_inode)->i_flags & i_nopack_mask)) {
reiserfs_warning(sb,
"reiserfs: Quota file must have tail packing disabled.");
path_put(&nd.path);
i++;
} while (len);
+ /*
+ * return EAGAIN if we have the potential of some data in the
+ * future, otherwise just return 0
+ */
+ if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
+ ret = -EAGAIN;
+
inode_double_unlock(ipipe->inode, opipe->inode);
/*
ret = link_ipipe_prep(ipipe, flags);
if (!ret) {
ret = link_opipe_prep(opipe, flags);
- if (!ret) {
+ if (!ret)
ret = link_pipe(ipipe, opipe, len, flags);
- if (!ret && (flags & SPLICE_F_NONBLOCK))
- ret = -EAGAIN;
- }
}
}
if (!mnt)
goto out;
- if (data) {
+ if (data && !(type->fs_flags & FS_BINARY_MOUNTDATA)) {
secdata = alloc_secdata();
if (!secdata)
goto out_mnt;
- error = security_sb_copy_data(type, data, secdata);
+ error = security_sb_copy_data(data, secdata);
if (error)
goto out_free_secdata;
}
*/
new_icl = kmem_zone_alloc(xfs_icluster_zone, KM_SLEEP);
if (radix_tree_preload(GFP_KERNEL)) {
+ xfs_idestroy(ip);
delay(1);
goto again;
}
xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
}
- /*
- * We reached the target so wait a bit longer for I/O to complete and
- * remove pushed items from the AIL before we start the next scan from
- * the start of the AIL.
- */
- if ((XFS_LSN_CMP(lsn, target) >= 0)) {
+ if (!count) {
+ /* We're past our target or empty, so idle */
+ tout = 1000;
+ } else if (XFS_LSN_CMP(lsn, target) >= 0) {
+ /*
+ * We reached the target so wait a bit longer for I/O to
+ * complete and remove pushed items from the AIL before we
+ * start the next scan from the start of the AIL.
+ */
tout += 20;
last_pushed_lsn = 0;
} else if ((restarts > XFS_TRANS_PUSH_AIL_RESTARTS) ||
- (count && ((stuck * 100) / count > 90))) {
+ ((stuck * 100) / count > 90)) {
/*
* Either there is a lot of contention on the AIL or we
* are stuck due to operations in progress. "Stuck" in this
#include <linux/ptrace.h>
#include <linux/percpu.h>
-#define ARCH_SUPPORTS_KRETPROBES
#define __ARCH_WANT_KPROBES_INSN_SLOT
#define MAX_INSN_SIZE 2
#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
struct sram_list_struct *tmp;
if (current_l1_stack_save == mm->context.l1_stack_save)
- current_l1_stack_save = 0;
+ current_l1_stack_save = NULL;
if (mm->context.l1_stack_save)
free_l1stack();
#define __NR_epoll_pwait 346
#define __NR_utimensat 347
#define __NR_signalfd 348
-#define __NR_timerfd 349
+#define __NR_timerfd_create 349
#define __NR_eventfd 350
#define __NR_pread64 351
#define __NR_pwrite64 352
#define __NR_get_robust_list 355
#define __NR_fallocate 356
#define __NR_semtimedop 357
+#define __NR_timerfd_settime 358
+#define __NR_timerfd_gettime 359
-#define __NR_syscall 358
+#define __NR_syscall 360
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
/*
* Authors: Bjorn Wesen (bjornw@axis.com)
* Hans-Peter Nilsson (hp@axis.com)
- *
- * $Log: uaccess.h,v $
- * Revision 1.8 2001/10/29 13:01:48 bjornw
- * Removed unused variable tmp2 in strnlen_user
- *
- * Revision 1.7 2001/10/02 12:44:52 hp
- * Add support for 64-bit put_user/get_user
- *
- * Revision 1.6 2001/10/01 14:51:17 bjornw
- * Added register prefixes and removed underscores
- *
- * Revision 1.5 2000/10/25 03:33:21 hp
- * - Provide implementation for everything else but get_user and put_user;
- * copying inline to/from user for constant length 0..16, 20, 24, and
- * clearing for 0..4, 8, 12, 16, 20, 24, strncpy_from_user and strnlen_user
- * always inline.
- * - Constraints for destination addr in get_user cannot be memory, only reg.
- * - Correct labels for PC at expected fault points.
- * - Nits with assembly code.
- * - Don't use statement expressions without value; use "do {} while (0)".
- * - Return correct values from __generic_... functions.
- *
- * Revision 1.4 2000/09/12 16:28:25 bjornw
- * * Removed comments from the get/put user asm code
- * * Constrains for destination addr in put_user cannot be memory, only reg
- *
- * Revision 1.3 2000/09/12 14:30:20 bjornw
- * MAX_ADDR_USER does not exist anymore
- *
- * Revision 1.2 2000/07/13 15:52:48 bjornw
- * New user-access functions
- *
- * Revision 1.1.1.1 2000/07/10 16:32:31 bjornw
- * CRIS architecture, working draft
- *
- *
- *
*/
/* Asm:s have been tweaked (within the domain of correctness) to give
/* More complex functions. Most are inline, but some call functions that
live in lib/usercopy.c */
-extern unsigned long __copy_user(void *to, const void *from, unsigned long n);
-extern unsigned long __copy_user_zeroing(void *to, const void *from, unsigned long n);
-extern unsigned long __do_clear_user(void *to, unsigned long n);
+extern unsigned long __copy_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __copy_user_zeroing(void *to, const void __user *from, unsigned long n);
+extern unsigned long __do_clear_user(void __user *to, unsigned long n);
static inline unsigned long
__generic_copy_to_user(void __user *to, const void *from, unsigned long n)
}
-/* Note that if these expand awfully if made into switch constructs, so
+/* Note that these expand awfully if made into switch constructs, so
don't do that. */
static inline unsigned long
*/
static inline unsigned long
-__generic_copy_from_user_nocheck(void *to, const void *from, unsigned long n)
+__generic_copy_from_user_nocheck(void *to, const void __user *from,
+ unsigned long n)
{
return __copy_user_zeroing(to,from,n);
}
static inline unsigned long
-__generic_copy_to_user_nocheck(void *to, const void *from, unsigned long n)
+__generic_copy_to_user_nocheck(void __user *to, const void *from,
+ unsigned long n)
{
return __copy_user(to,from,n);
}
static inline unsigned long
-__generic_clear_user_nocheck(void *to, unsigned long n)
+__generic_clear_user_nocheck(void __user *to, unsigned long n)
{
return __do_clear_user(to,n);
}
#define __NR_timerfd_create 322
#define __NR_eventfd 323
#define __NR_fallocate 324
-#define __NR_timerfd_settime 315
-#define __NR_timerfd_gettime 316
+#define __NR_timerfd_settime 325
+#define __NR_timerfd_gettime 326
#ifdef __KERNEL__
-#define NR_syscalls 325
+#define NR_syscalls 327
#include <asm/arch/unistd.h>
header-y += break.h
header-y += fpu.h
header-y += fpswa.h
-header-y += gcc_intrin.h
header-y += ia64regs.h
header-y += intel_intrin.h
header-y += intrinsics.h
header-y += rse.h
header-y += ucontext.h
+unifdef-y += gcc_intrin.h
unifdef-y += perfmon.h
unifdef-y += ustack.h
struct irq_cfg {
ia64_vector vector;
cpumask_t domain;
+ cpumask_t old_domain;
+ unsigned move_cleanup_count;
+ u8 move_in_progress : 1;
};
extern spinlock_t vector_lock;
extern struct irq_cfg irq_cfg[NR_IRQS];
extern void free_irq_vector (int vector);
extern int reserve_irq_vector (int vector);
extern void __setup_vector_irq(int cpu);
-extern int reassign_irq_vector(int irq, int cpu);
extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
extern void register_percpu_irq (ia64_vector vec, struct irqaction *action);
extern int check_irq_used (int irq);
extern void destroy_and_reserve_irq (unsigned int irq);
+#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+extern int irq_prepare_move(int irq, int cpu);
+extern void irq_complete_move(unsigned int irq);
+#else
+static inline int irq_prepare_move(int irq, int cpu) { return 0; }
+static inline void irq_complete_move(unsigned int irq) {}
+#endif
+
static inline void ia64_resend_irq(unsigned int vector)
{
platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
};
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define SLOT0_OPCODE_SHIFT (37)
unsigned short slot;
};
-extern int kprobes_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
extern int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
-/* ia64 does not need this */
-static inline void jprobe_return(void)
-{
-}
extern void invalidate_stacked_regs(void);
extern void flush_register_stack(void);
extern void arch_remove_kprobe(struct kprobe *p);
#include <asm/current.h>
#include <asm/page.h>
-#define __ARCH_SYS_PTRACE 1
-
/*
* We use the ia64_psr(regs)->ri to determine which of the three
* instructions in bundle (16 bytes) took the sample. Generate
#define arch_ptrace_attach(child) \
ptrace_attach_sync_user_rbs(child)
+ #define arch_has_single_step() (1)
+ extern void user_enable_single_step(struct task_struct *);
+ extern void user_disable_single_step(struct task_struct *);
+
+ #define arch_has_block_step() (1)
+ extern void user_enable_block_step(struct task_struct *);
+
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
ia64_sal_physical_id_info(u16 *splid)
{
struct ia64_sal_retval isrv;
+
+ if (sal_revision < SAL_VERSION_CODE(3,2))
+ return -1;
+
SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
if (splid)
*splid = isrv.v0;
#define __NR_epoll_pwait 315
#define __NR_utimensat 316
#define __NR_signalfd 317
-#define __NR_timerfd 318
+#define __NR_timerfd_create 318
#define __NR_eventfd 319
#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
#ifdef __KERNEL__
-#define NR_syscalls 321
+#define NR_syscalls 323
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
extern void config_BSP(char *command, int len);
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
#endif /* _M68KNOMMU_MACHDEP_H */
#define __NR_epoll_pwait 315
#define __NR_utimensat 316
#define __NR_signalfd 317
-#define __NR_timerfd 318
+#define __NR_timerfd_create 318
#define __NR_eventfd 319
#define __NR_fallocate 320
+#define __NR_timerfd_settime 321
+#define __NR_timerfd_gettime 322
#ifdef __KERNEL__
-#define NR_syscalls 321
+#define NR_syscalls 323
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
include include/asm-generic/Kbuild.asm
-
-unifdef-y += termios.h
-unifdef-y += ptrace.h
-unifdef-y += page.h
#define is_trap(instr) (IS_TW(instr) || IS_TWI(instr))
#endif
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization. This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- * -- paulus
- */
#define _PTE_NONE_MASK _PAGE_ACCESSED
#else /* CONFIG_6xx */
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization. This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- * -- paulus
- */
#define _PTE_NONE_MASK _PAGE_ACCESSED
#else /* CONFIG_6xx */
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define kretprobe_blacklist_size 0
#define KPROBE_SWAP_INST 0x10
extern void __const_udelay(unsigned long xloops);
extern void __delay(unsigned long loops);
-#ifdef CONFIG_SUPERH32
#define udelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
__udelay(n))
#define ndelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
__ndelay(n))
-#else
-extern void udelay(unsigned long usecs);
-extern void ndelay(unsigned long nsecs);
-#endif
#endif /* __ASM_SH_DELAY_H */
#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */
+extern char reboot_command[];
+
extern struct thread_info *current_set[NR_CPUS];
extern unsigned long empty_bad_page;
#define arch_remove_kprobe(p) do {} while (0)
-#define ARCH_SUPPORTS_KRETPROBES
-
#define flush_insn_slot(p) \
do { flushi(&(p)->ainsn.insn[0]); \
flushi(&(p)->ainsn.insn[1]); \
#define ARCH_SUN4C_SUN4 0
#define ARCH_SUN4 0
+extern char reboot_command[];
+
/* These are here in an effort to more fully work around Spitfire Errata
* #51. Essentially, if a memory barrier occurs soon after a mispredicted
* branch, the chip can stop executing instructions until a trap occurs.
unifdef-y += mce.h
unifdef-y += msr.h
unifdef-y += mtrr.h
-unifdef-y += page.h
unifdef-y += posix_types_32.h
unifdef-y += posix_types_64.h
unifdef-y += ptrace.h
: (((unsigned long)current_thread_info()) + THREAD_SIZE \
- (unsigned long)(ADDR)))
-#define ARCH_SUPPORTS_KRETPROBES
#define flush_insn_slot(p) do { } while (0)
extern const int kretprobe_blacklist_size;
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val(x))
#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) \
- & ~(PAGE_MASK | _PAGE_USER | _PAGE_PSE | _PAGE_NX)) \
- != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
static inline unsigned long pud_bad(pud_t pud)
{
- return pud_val(pud) &
- ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
+ return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
}
static inline unsigned long pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) &
- ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER | _PAGE_PSE | _PAGE_NX);
+ return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
}
#define pte_none(x) (!pte_val(x))
#include <crypto/algapi.h>
#include <crypto/skcipher.h>
+#include <linux/init.h>
#include <linux/types.h>
struct rtattr;
int skcipher_geniv_init(struct crypto_tfm *tfm);
void skcipher_geniv_exit(struct crypto_tfm *tfm);
+int __init eseqiv_module_init(void);
+void __exit eseqiv_module_exit(void);
+int __init chainiv_module_init(void);
+void __exit chainiv_module_exit(void);
+
static inline struct crypto_ablkcipher *skcipher_geniv_cipher(
struct crypto_ablkcipher *geniv)
{
header-y += elf-fdpic.h
header-y += elf-em.h
header-y += fadvise.h
+header-y += falloc.h
header-y += fd.h
header-y += fdreg.h
header-y += fib_rules.h
unsigned int cmd_len;
unsigned char cmd[BLK_MAX_CDB];
- unsigned int raw_data_len;
unsigned int data_len;
+ unsigned int extra_len; /* length of alignment and padding */
unsigned int sense_len;
void *data;
void *sense;
unsigned long seg_boundary_mask;
void *dma_drain_buffer;
unsigned int dma_drain_size;
+ unsigned int dma_pad_mask;
unsigned int dma_alignment;
struct blk_queue_tag *queue_tags;
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
extern void blk_queue_hardsect_size(struct request_queue *, unsigned short);
extern void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b);
+extern void blk_queue_dma_pad(struct request_queue *, unsigned int);
extern int blk_queue_dma_drain(struct request_queue *q,
dma_drain_needed_fn *dma_drain_needed,
void *buf, unsigned int size);
/* */
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
SUBSYS(mem_cgroup)
#endif
#define noinline
#endif
+/*
+ * Rather then using noinline to prevent stack consumption, use
+ * noinline_for_stack instead. For documentaiton reasons.
+ */
+#define noinline_for_stack noinline
+
#ifndef __always_inline
#define __always_inline inline
#endif
};
#if defined(CONFIG_DEBUG_FS)
+
+/* declared over in file.c */
+extern const struct file_operations debugfs_file_operations;
+extern const struct inode_operations debugfs_link_operations;
+
struct dentry *debugfs_create_file(const char *name, mode_t mode,
struct dentry *parent, void *data,
const struct file_operations *fops);
* Delay routines, using a pre-computed "loops_per_jiffy" value.
*/
+#include <linux/kernel.h>
+
extern unsigned long loops_per_jiffy;
#include <asm/delay.h>
#endif
#ifndef ndelay
-#define ndelay(x) udelay(((x)+999)/1000)
+static inline void ndelay(unsigned long x)
+{
+ udelay(DIV_ROUND_UP(x, 1000));
+}
+#define ndelay(x) ndelay(x)
#endif
void calibrate_delay(void);
*/
static inline void dma_async_issue_pending(struct dma_chan *chan)
{
- return chan->device->device_issue_pending(chan);
+ chan->device->device_issue_pending(chan);
}
#define dma_async_memcpy_issue_pending(chan) dma_async_issue_pending(chan)
#define dev_to_disk(device) container_of(device, struct gendisk, dev)
#define dev_to_part(device) container_of(device, struct hd_struct, dev)
-extern struct device_type disk_type;
extern struct device_type part_type;
extern struct kobject *block_depr;
extern struct class block_class;
+extern const struct seq_operations partitions_op;
+extern const struct seq_operations diskstats_op;
+
enum {
/* These three have identical behaviour; use the second one if DOS FDISK gets
confused about extended/logical partitions starting past cylinder 1023. */
extern struct gendisk *alloc_disk(int minors);
extern struct kobject *get_disk(struct gendisk *disk);
extern void put_disk(struct gendisk *disk);
-extern void genhd_media_change_notify(struct gendisk *disk);
extern void blk_register_region(dev_t devt, unsigned long range,
struct module *module,
struct kobject *(*probe)(dev_t, int *, void *),
--- /dev/null
+#ifndef __LINUX_GPIO_H
+#define __LINUX_GPIO_H
+
+/* see Documentation/gpio.txt */
+
+#ifdef CONFIG_GENERIC_GPIO
+#include <asm/gpio.h>
+
+#else
+
+/*
+ * Some platforms don't support the GPIO programming interface.
+ *
+ * In case some driver uses it anyway (it should normally have
+ * depended on GENERIC_GPIO), these routines help the compiler
+ * optimize out much GPIO-related code ... or trigger a runtime
+ * warning when something is wrongly called.
+ */
+
+static inline int gpio_is_valid(int number)
+{
+ return 0;
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+ return -ENOSYS;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+ /* GPIO can never have been requested */
+ WARN_ON(1);
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+ return -ENOSYS;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as {in,out}put */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ /* GPIO can never have been requested or set as input */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ /* irq can never have been returned from gpio_to_irq() */
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+#endif
+
+#endif /* __LINUX_GPIO_H */
+extern int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size);
extern unsigned long iommu_area_alloc(unsigned long *map, unsigned long size,
unsigned long start, unsigned int nr,
unsigned long shift,
DECLARE_PER_CPU(struct kprobe *, current_kprobe);
DECLARE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
-#ifdef ARCH_SUPPORTS_KRETPROBES
+#ifdef CONFIG_KRETPROBES
extern void arch_prepare_kretprobe(struct kretprobe_instance *ri,
struct pt_regs *regs);
extern int arch_trampoline_kprobe(struct kprobe *p);
-#else /* ARCH_SUPPORTS_KRETPROBES */
+#else /* CONFIG_KRETPROBES */
static inline void arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
{
return 0;
}
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
/*
* Function-return probe -
* Note:
* Get size for mmap(vcpu_fd)
*/
#define KVM_GET_VCPU_MMAP_SIZE _IO(KVMIO, 0x04) /* in bytes */
+#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x05, struct kvm_cpuid2)
/*
* Extension capability list.
#define KVM_CAP_MMU_SHADOW_CACHE_CONTROL 2
#define KVM_CAP_USER_MEMORY 3
#define KVM_CAP_SET_TSS_ADDR 4
-#define KVM_CAP_EXT_CPUID 5
#define KVM_CAP_VAPIC 6
+#define KVM_CAP_EXT_CPUID 7
/*
* ioctls for VM fds
#define KVM_CREATE_VCPU _IO(KVMIO, 0x41)
#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 0x42, struct kvm_dirty_log)
#define KVM_SET_MEMORY_ALIAS _IOW(KVMIO, 0x43, struct kvm_memory_alias)
-#define KVM_GET_SUPPORTED_CPUID _IOWR(KVMIO, 0x48, struct kvm_cpuid2)
/* Device model IOC */
#define KVM_CREATE_IRQCHIP _IO(KVMIO, 0x60)
#define KVM_IRQ_LINE _IOW(KVMIO, 0x61, struct kvm_irq_level)
struct kvm {
struct mutex lock; /* protects the vcpus array and APIC accesses */
spinlock_t mmu_lock;
+ struct rw_semaphore slots_lock;
struct mm_struct *mm; /* userspace tied to this vm */
int nmemslots;
struct kvm_memory_slot memslots[KVM_MEMORY_SLOTS +
#define MARK_NOARGS " "
/* To be used for string format validity checking with gcc */
-static inline void __printf(1, 2) __mark_check_format(const char *fmt, ...)
+static inline void __printf(1, 2) ___mark_check_format(const char *fmt, ...)
{
}
+#define __mark_check_format(format, args...) \
+ do { \
+ if (0) \
+ ___mark_check_format(format, ## args); \
+ } while (0)
+
extern marker_probe_func __mark_empty_function;
extern void marker_probe_cb(const struct marker *mdata,
struct page;
struct mm_struct;
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
extern void mm_init_cgroup(struct mm_struct *mm, struct task_struct *p);
extern void mm_free_cgroup(struct mm_struct *mm);
-extern void page_assign_page_cgroup(struct page *page,
- struct page_cgroup *pc);
+
+#define page_reset_bad_cgroup(page) ((page)->page_cgroup = 0)
+
extern struct page_cgroup *page_get_page_cgroup(struct page *page);
extern int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask);
-extern void mem_cgroup_uncharge(struct page_cgroup *pc);
+extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
+ gfp_t gfp_mask);
extern void mem_cgroup_uncharge_page(struct page *page);
-extern void mem_cgroup_move_lists(struct page_cgroup *pc, bool active);
+extern void mem_cgroup_move_lists(struct page *page, bool active);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
struct list_head *dst,
unsigned long *scanned, int order,
struct mem_cgroup *mem_cont,
int active);
extern void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask);
-extern int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask);
int task_in_mem_cgroup(struct task_struct *task, const struct mem_cgroup *mem);
-#define vm_match_cgroup(mm, cgroup) \
+#define mm_match_cgroup(mm, cgroup) \
((cgroup) == rcu_dereference((mm)->mem_cgroup))
extern int mem_cgroup_prepare_migration(struct page *page);
extern long mem_cgroup_calc_reclaim_inactive(struct mem_cgroup *mem,
struct zone *zone, int priority);
-#else /* CONFIG_CGROUP_MEM_CONT */
+#else /* CONFIG_CGROUP_MEM_RES_CTLR */
static inline void mm_init_cgroup(struct mm_struct *mm,
struct task_struct *p)
{
{
}
-static inline void page_assign_page_cgroup(struct page *page,
- struct page_cgroup *pc)
+static inline void page_reset_bad_cgroup(struct page *page)
{
}
return NULL;
}
-static inline int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask)
+static inline int mem_cgroup_charge(struct page *page,
+ struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
}
-static inline void mem_cgroup_uncharge(struct page_cgroup *pc)
+static inline int mem_cgroup_cache_charge(struct page *page,
+ struct mm_struct *mm, gfp_t gfp_mask)
{
+ return 0;
}
static inline void mem_cgroup_uncharge_page(struct page *page)
{
}
-static inline void mem_cgroup_move_lists(struct page_cgroup *pc,
- bool active)
-{
-}
-
-static inline int mem_cgroup_cache_charge(struct page *page,
- struct mm_struct *mm,
- gfp_t gfp_mask)
+static inline void mem_cgroup_move_lists(struct page *page, bool active)
{
- return 0;
}
-static inline int vm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
+static inline int mm_match_cgroup(struct mm_struct *mm, struct mem_cgroup *mem)
{
return 1;
}
#if NR_CPUS >= CONFIG_SPLIT_PTLOCK_CPUS
spinlock_t ptl;
#endif
- struct {
- struct kmem_cache *slab; /* SLUB: Pointer to slab */
- void *end; /* SLUB: end marker */
- };
+ struct kmem_cache *slab; /* SLUB: Pointer to slab */
struct page *first_page; /* Compound tail pages */
};
union {
void *virtual; /* Kernel virtual address (NULL if
not kmapped, ie. highmem) */
#endif /* WANT_PAGE_VIRTUAL */
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long page_cgroup;
#endif
};
/* aio bits */
rwlock_t ioctx_list_lock;
struct kioctx *ioctx_list;
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
struct mem_cgroup *mem_cgroup;
#endif
};
struct netpoll_info {
atomic_t refcnt;
+ int rx_flags;
spinlock_t rx_lock;
struct netpoll *rx_np; /* netpoll that registered an rx_hook */
struct sk_buff_head arp_tx; /* list of arp requests to reply to */
unsigned long flags;
int ret = 0;
- if (!npinfo || !npinfo->rx_np)
+ if (!npinfo || (!npinfo->rx_np && !npinfo->rx_flags))
return 0;
spin_lock_irqsave(&npinfo->rx_lock, flags);
- /* check rx_np again with the lock held */
- if (npinfo->rx_np && __netpoll_rx(skb))
+ /* check rx_flags again with the lock held */
+ if (npinfo->rx_flags && __netpoll_rx(skb))
ret = 1;
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
+/**
+ * DECLARE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DECLARE_PCI_DEVICE_TABLE(_table) \
+ const struct pci_device_id _table[] __devinitconst
+
/**
* PCI_DEVICE - macro used to describe a specific pci device
* @vend: the 16 bit PCI Vendor ID
unsigned long flags;
+ int allclean;
+
unsigned long max_write_behind; /* write-behind mode */
atomic_t behind_writes;
#define BarriersNotsupp 5 /* BIO_RW_BARRIER is not supported */
#define AllReserved 6 /* If whole device is reserved for
* one array */
+#define AutoDetected 7 /* added by auto-detect */
int desc_nr; /* descriptor index in the superblock */
int raid_disk; /* role of device in array */
extern unsigned int sysctl_sched_features;
extern unsigned int sysctl_sched_migration_cost;
extern unsigned int sysctl_sched_nr_migrate;
-#if defined(CONFIG_FAIR_GROUP_SCHED) && defined(CONFIG_SMP)
-extern unsigned int sysctl_sched_min_bal_int_shares;
-extern unsigned int sysctl_sched_max_bal_int_shares;
-#endif
int sched_nr_latency_handler(struct ctl_table *table, int write,
struct file *file, void __user *buffer, size_t *length,
#include <linux/xfrm.h>
#include <net/flow.h>
-/* only a char in selinux superblock security struct flags */
-#define FSCONTEXT_MNT 0x01
-#define CONTEXT_MNT 0x02
-#define ROOTCONTEXT_MNT 0x04
-#define DEFCONTEXT_MNT 0x08
-
extern unsigned securebits;
struct ctl_table;
#ifdef CONFIG_SECURITY
+struct security_mnt_opts {
+ char **mnt_opts;
+ int *mnt_opts_flags;
+ int num_mnt_opts;
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+ opts->mnt_opts = NULL;
+ opts->mnt_opts_flags = NULL;
+ opts->num_mnt_opts = 0;
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+ int i;
+ if (opts->mnt_opts)
+ for(i = 0; i < opts->num_mnt_opts; i++)
+ kfree(opts->mnt_opts[i]);
+ kfree(opts->mnt_opts);
+ opts->mnt_opts = NULL;
+ kfree(opts->mnt_opts_flags);
+ opts->mnt_opts_flags = NULL;
+ opts->num_mnt_opts = 0;
+}
+
/**
* struct security_operations - main security structure
*
* @sb_get_mnt_opts:
* Get the security relevant mount options used for a superblock
* @sb the superblock to get security mount options from
- * @mount_options array for pointers to mount options
- * @mount_flags array of ints specifying what each mount options is
- * @num_opts number of options in the arrays
+ * @opts binary data structure containing all lsm mount data
* @sb_set_mnt_opts:
* Set the security relevant mount options used for a superblock
* @sb the superblock to set security mount options for
- * @mount_options array for pointers to mount options
- * @mount_flags array of ints specifying what each mount options is
- * @num_opts number of options in the arrays
+ * @opts binary data structure containing all lsm mount data
* @sb_clone_mnt_opts:
* Copy all security options from a given superblock to another
* @oldsb old superblock which contain information to clone
* @newsb new superblock which needs filled in
+ * @sb_parse_opts_str:
+ * Parse a string of security data filling in the opts structure
+ * @options string containing all mount options known by the LSM
+ * @opts binary data structure usable by the LSM
*
* Security hooks for inode operations.
*
int (*sb_alloc_security) (struct super_block * sb);
void (*sb_free_security) (struct super_block * sb);
- int (*sb_copy_data)(struct file_system_type *type,
- void *orig, void *copy);
+ int (*sb_copy_data)(char *orig, char *copy);
int (*sb_kern_mount) (struct super_block *sb, void *data);
int (*sb_statfs) (struct dentry *dentry);
int (*sb_mount) (char *dev_name, struct nameidata * nd,
void (*sb_post_pivotroot) (struct nameidata * old_nd,
struct nameidata * new_nd);
int (*sb_get_mnt_opts) (const struct super_block *sb,
- char ***mount_options, int **flags,
- int *num_opts);
- int (*sb_set_mnt_opts) (struct super_block *sb, char **mount_options,
- int *flags, int num_opts);
+ struct security_mnt_opts *opts);
+ int (*sb_set_mnt_opts) (struct super_block *sb,
+ struct security_mnt_opts *opts);
void (*sb_clone_mnt_opts) (const struct super_block *oldsb,
struct super_block *newsb);
+ int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts);
int (*inode_alloc_security) (struct inode *inode);
void (*inode_free_security) (struct inode *inode);
int security_bprm_secureexec(struct linux_binprm *bprm);
int security_sb_alloc(struct super_block *sb);
void security_sb_free(struct super_block *sb);
-int security_sb_copy_data(struct file_system_type *type, void *orig, void *copy);
+int security_sb_copy_data(char *orig, char *copy);
int security_sb_kern_mount(struct super_block *sb, void *data);
int security_sb_statfs(struct dentry *dentry);
int security_sb_mount(char *dev_name, struct nameidata *nd,
void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd);
int security_sb_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd);
void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd);
-int security_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options,
- int **flags, int *num_opts);
-int security_sb_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts);
+int security_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts);
+int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts);
void security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb);
+int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts);
int security_inode_alloc(struct inode *inode);
void security_inode_free(struct inode *inode);
void security_release_secctx(char *secdata, u32 seclen);
#else /* CONFIG_SECURITY */
+struct security_mnt_opts {
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+}
/*
* This is the default capabilities functionality. Most of these functions
static inline void security_sb_free (struct super_block *sb)
{ }
-static inline int security_sb_copy_data (struct file_system_type *type,
- void *orig, void *copy)
+static inline int security_sb_copy_data (char *orig, char *copy)
{
return 0;
}
static inline void security_sb_post_pivotroot (struct nameidata *old_nd,
struct nameidata *new_nd)
{ }
+static inline int security_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts)
+{
+ security_init_mnt_opts(opts);
+ return 0;
+}
+
+static inline int security_sb_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
+{
+ return 0;
+}
+
+static inline void security_sb_clone_mnt_opts(const struct super_block *oldsb,
+ struct super_block *newsb)
+{ }
+
+static inline int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return 0;
+}
static inline int security_inode_alloc (struct inode *inode)
{
int size; /* The size of an object including meta data */
int objsize; /* The size of an object without meta data */
int offset; /* Free pointer offset. */
- int order;
+ int order; /* Current preferred allocation order */
/*
* Avoid an extra cache line for UP, SMP and for the node local to
if (size <= 512) return 9;
if (size <= 1024) return 10;
if (size <= 2 * 1024) return 11;
+ if (size <= 4 * 1024) return 12;
/*
* The following is only needed to support architectures with a larger page
* size than 4k.
*/
- if (size <= 4 * 1024) return 12;
if (size <= 8 * 1024) return 13;
if (size <= 16 * 1024) return 14;
if (size <= 32 * 1024) return 15;
#define SM501_DEVICEID_SM501 (0x05010000)
#define SM501_DEVICEID_IDMASK (0xffff0000)
+#define SM501_DEVICEID_REVMASK (0x000000ff)
#define SM501_PLLCLOCK_COUNT (0x000064)
#define SM501_MISC_TIMING (0x000068)
#define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
+#define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
+
/* GPIO base */
#define SM501_GPIO (0x010000)
#define SM501_GPIO_DATA_LOW (0x00)
extern unsigned long sm501_set_clock(struct device *dev,
int clksrc, unsigned long freq);
-extern unsigned long sm501_find_clock(int clksrc, unsigned long req_freq);
+extern unsigned long sm501_find_clock(struct device *dev,
+ int clksrc, unsigned long req_freq);
/* sm501_misc_control
*
* @altsetting: array of interface structures, one for each alternate
* setting that may be selected. Each one includes a set of
* endpoint configurations. They will be in no particular order.
- * @num_altsetting: number of altsettings defined.
* @cur_altsetting: the current altsetting.
+ * @num_altsetting: number of altsettings defined.
* @intf_assoc: interface association descriptor
- * @driver: the USB driver that is bound to this interface.
* @minor: the minor number assigned to this interface, if this
* interface is bound to a driver that uses the USB major number.
* If this interface does not use the USB major, this field should
.idVendor = (vend), \
.idProduct = (prod)
/**
- * USB_DEVICE_VER - macro used to describe a specific usb device with a
- * version range
+ * USB_DEVICE_VER - describe a specific usb device with a version range
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @lo: the bcdDevice_lo value
.bcdDevice_hi = (hi)
/**
- * USB_DEVICE_INTERFACE_PROTOCOL - macro used to describe a usb
- * device with a specific interface protocol
+ * USB_DEVICE_INTERFACE_PROTOCOL - describe a usb device with a specific interface protocol
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @pr: bInterfaceProtocol value
.bInterfaceProtocol = (pr)
/**
- * USB_DEVICE_AND_INTERFACE_INFO - macro used to describe a specific usb device
- * with a class of usb interfaces
+ * USB_DEVICE_AND_INTERFACE_INFO - describe a specific usb device with a class of usb interfaces
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
* @cl: bInterfaceClass value
static inline unsigned int inet_ehashfn(const __be32 laddr, const __u16 lport,
const __be32 faddr, const __be16 fport)
{
- return jhash_2words((__force __u32) laddr ^ (__force __u32) faddr,
+ return jhash_3words((__force __u32) laddr,
+ (__force __u32) faddr,
((__u32) lport) << 16 | (__force __u32)fport,
inet_ehash_secret);
}
extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
struct ssp_response_iu *iu);
+struct sas_phy *sas_find_local_phy(struct domain_device *dev);
#endif /* _SASLIB_H_ */
struct list_head host_list;
struct iscsi_transport *transport;
spinlock_t lock;
+ struct work_struct block_work;
+ struct work_struct unblock_work;
struct work_struct scan_work;
struct work_struct unbind_work;
infrastructure that works with cgroups
depends on CGROUPS
+config CGROUP_MEM_RES_CTLR
+ bool "Memory Resource Controller for Control Groups"
+ depends on CGROUPS && RESOURCE_COUNTERS
+ help
+ Provides a memory resource controller that manages both page cache and
+ RSS memory.
+
+ Note that setting this option increases fixed memory overhead
+ associated with each page of memory in the system by 4/8 bytes
+ and also increases cache misses because struct page on many 64bit
+ systems will not fit into a single cache line anymore.
+
+ Only enable when you're ok with these trade offs and really
+ sure you need the memory resource controller.
+
config SYSFS_DEPRECATED
+ bool
+
+config SYSFS_DEPRECATED_V2
bool "Create deprecated sysfs files"
depends on SYSFS
default y
+ select SYSFS_DEPRECATED
help
This option creates deprecated symlinks such as the
"device"-link, the <subsystem>:<name>-link, and the
If enabled, this option will also move any device structures
that belong to a class, back into the /sys/class hierarchy, in
- order to support older versions of udev.
-
- If you are using a distro that was released in 2006 or later,
- it should be safe to say N here.
-
-config CGROUP_MEM_CONT
- bool "Memory controller for cgroups"
- depends on CGROUPS && RESOURCE_COUNTERS
- help
- Provides a memory controller that manages both page cache and
- RSS memory.
+ order to support older versions of udev and some userspace
+ programs.
- Note that setting this option increases fixed memory overhead
- associated with each page of memory in the system by 4/8 bytes
- and also increases cache misses because struct page on many 64bit
- systems will not fit into a single cache line anymore.
-
- Only enable when you're ok with these trade offs and really
- sure you need the memory controller.
+ If you are using a distro with the most recent userspace
+ packages, it should be safe to say N here.
config PROC_PID_CPUSET
bool "Include legacy /proc/<pid>/cpuset file"
static int __init loglevel(char *str)
{
get_option(&str, &console_loglevel);
- return 1;
+ return 0;
}
early_param("loglevel", loglevel);
mutex_lock(&cgroup_mutex);
- cgrp->flags = 0;
INIT_LIST_HEAD(&cgrp->sibling);
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
cgrp->root = parent->root;
cgrp->top_cgroup = parent->top_cgroup;
+ if (notify_on_release(parent))
+ set_bit(CGRP_NOTIFY_ON_RELEASE, &cgrp->flags);
+
for_each_subsys(root, ss) {
struct cgroup_subsys_state *css = ss->create(ss, cgrp);
if (IS_ERR(css)) {
* Call without callback_mutex or task_lock() held. May be
* called with or without cgroup_mutex held. Thanks in part to
* 'the_top_cpuset_hack', the task's cpuset pointer will never
- * be NULL. This routine also might acquire callback_mutex and
- * current->mm->mmap_sem during call.
+ * be NULL. This routine also might acquire callback_mutex during
+ * call.
*
* Reading current->cpuset->mems_generation doesn't need task_lock
* to guard the current->cpuset derefence, because it is guarded
static int will_become_orphaned_pgrp(struct pid *pgrp, struct task_struct *ignored_task)
{
struct task_struct *p;
- int ret = 1;
do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
- if (p == ignored_task
- || p->exit_state
- || is_global_init(p->real_parent))
+ if ((p == ignored_task) ||
+ (p->exit_state && thread_group_empty(p)) ||
+ is_global_init(p->real_parent))
continue;
+
if (task_pgrp(p->real_parent) != pgrp &&
- task_session(p->real_parent) == task_session(p)) {
- ret = 0;
- break;
- }
+ task_session(p->real_parent) == task_session(p))
+ return 0;
} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
- return ret; /* (sighing) "Often!" */
+
+ return 1;
}
int is_current_pgrp_orphaned(void)
return retval;
}
+/*
+ * Check to see if any process groups have become orphaned as
+ * a result of our exiting, and if they have any stopped jobs,
+ * send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2)
+ */
+static void
+kill_orphaned_pgrp(struct task_struct *tsk, struct task_struct *parent)
+{
+ struct pid *pgrp = task_pgrp(tsk);
+ struct task_struct *ignored_task = tsk;
+
+ if (!parent)
+ /* exit: our father is in a different pgrp than
+ * we are and we were the only connection outside.
+ */
+ parent = tsk->real_parent;
+ else
+ /* reparent: our child is in a different pgrp than
+ * we are, and it was the only connection outside.
+ */
+ ignored_task = NULL;
+
+ if (task_pgrp(parent) != pgrp &&
+ task_session(parent) == task_session(tsk) &&
+ will_become_orphaned_pgrp(pgrp, ignored_task) &&
+ has_stopped_jobs(pgrp)) {
+ __kill_pgrp_info(SIGHUP, SEND_SIG_PRIV, pgrp);
+ __kill_pgrp_info(SIGCONT, SEND_SIG_PRIV, pgrp);
+ }
+}
+
/**
* reparent_to_kthreadd - Reparent the calling kernel thread to kthreadd
*
p->exit_signal != -1 && thread_group_empty(p))
do_notify_parent(p, p->exit_signal);
- /*
- * process group orphan check
- * Case ii: Our child is in a different pgrp
- * than we are, and it was the only connection
- * outside, so the child pgrp is now orphaned.
- */
- if ((task_pgrp(p) != task_pgrp(father)) &&
- (task_session(p) == task_session(father))) {
- struct pid *pgrp = task_pgrp(p);
-
- if (will_become_orphaned_pgrp(pgrp, NULL) &&
- has_stopped_jobs(pgrp)) {
- __kill_pgrp_info(SIGHUP, SEND_SIG_PRIV, pgrp);
- __kill_pgrp_info(SIGCONT, SEND_SIG_PRIV, pgrp);
- }
- }
+ kill_orphaned_pgrp(p, father);
}
/*
* Send signals to all our closest relatives so that they know
* to properly mourn us..
*/
-static void exit_notify(struct task_struct *tsk)
+static void exit_notify(struct task_struct *tsk, int group_dead)
{
int state;
- struct task_struct *t;
- struct pid *pgrp;
/*
* This does two things:
exit_task_namespaces(tsk);
write_lock_irq(&tasklist_lock);
- /*
- * Check to see if any process groups have become orphaned
- * as a result of our exiting, and if they have any stopped
- * jobs, send them a SIGHUP and then a SIGCONT. (POSIX 3.2.2.2)
- *
- * Case i: Our father is in a different pgrp than we are
- * and we were the only connection outside, so our pgrp
- * is about to become orphaned.
- */
- t = tsk->real_parent;
-
- pgrp = task_pgrp(tsk);
- if ((task_pgrp(t) != pgrp) &&
- (task_session(t) == task_session(tsk)) &&
- will_become_orphaned_pgrp(pgrp, tsk) &&
- has_stopped_jobs(pgrp)) {
- __kill_pgrp_info(SIGHUP, SEND_SIG_PRIV, pgrp);
- __kill_pgrp_info(SIGCONT, SEND_SIG_PRIV, pgrp);
- }
+ if (group_dead)
+ kill_orphaned_pgrp(tsk->group_leader, NULL);
/* Let father know we died
*
* the same after a fork.
*/
if (tsk->exit_signal != SIGCHLD && tsk->exit_signal != -1 &&
- ( tsk->parent_exec_id != t->self_exec_id ||
- tsk->self_exec_id != tsk->parent_exec_id)
+ (tsk->parent_exec_id != tsk->real_parent->self_exec_id ||
+ tsk->self_exec_id != tsk->parent_exec_id)
&& !capable(CAP_KILL))
tsk->exit_signal = SIGCHLD;
module_put(tsk->binfmt->module);
proc_exit_connector(tsk);
- exit_notify(tsk);
+ exit_notify(tsk, group_dead);
#ifdef CONFIG_NUMA
mpol_free(tsk->mempolicy);
tsk->mempolicy = NULL;
return 0;
}
+/*
+ * If we have a symbol_name argument, look it up and add the offset field
+ * to it. This way, we can specify a relative address to a symbol.
+ */
+static kprobe_opcode_t __kprobes *kprobe_addr(struct kprobe *p)
+{
+ kprobe_opcode_t *addr = p->addr;
+ if (p->symbol_name) {
+ if (addr)
+ return NULL;
+ kprobe_lookup_name(p->symbol_name, addr);
+ }
+
+ if (!addr)
+ return NULL;
+ return (kprobe_opcode_t *)(((char *)addr) + p->offset);
+}
+
static int __kprobes __register_kprobe(struct kprobe *p,
unsigned long called_from)
{
int ret = 0;
struct kprobe *old_p;
struct module *probed_mod;
+ kprobe_opcode_t *addr;
- /*
- * If we have a symbol_name argument look it up,
- * and add it to the address. That way the addr
- * field can either be global or relative to a symbol.
- */
- if (p->symbol_name) {
- if (p->addr)
- return -EINVAL;
- kprobe_lookup_name(p->symbol_name, p->addr);
- }
-
- if (!p->addr)
+ addr = kprobe_addr(p);
+ if (!addr)
return -EINVAL;
- p->addr = (kprobe_opcode_t *)(((char *)p->addr)+ p->offset);
+ p->addr = addr;
if (!kernel_text_address((unsigned long) p->addr) ||
in_kprobes_functions((unsigned long) p->addr))
unregister_kprobe(&jp->kp);
}
-#ifdef ARCH_SUPPORTS_KRETPROBES
-
+#ifdef CONFIG_KRETPROBES
/*
* This kprobe pre_handler is registered with every kretprobe. When probe
* hits it will set up the return probe.
int ret = 0;
struct kretprobe_instance *inst;
int i;
- void *addr = rp->kp.addr;
+ void *addr;
if (kretprobe_blacklist_size) {
- if (addr == NULL)
- kprobe_lookup_name(rp->kp.symbol_name, addr);
- addr += rp->kp.offset;
+ addr = kprobe_addr(&rp->kp);
+ if (!addr)
+ return -EINVAL;
for (i = 0; kretprobe_blacklist[i].name != NULL; i++) {
if (kretprobe_blacklist[i].addr == addr)
return ret;
}
-#else /* ARCH_SUPPORTS_KRETPROBES */
-
+#else /* CONFIG_KRETPROBES */
int __kprobes register_kretprobe(struct kretprobe *rp)
{
return -ENOSYS;
{
return 0;
}
-
-#endif /* ARCH_SUPPORTS_KRETPROBES */
+#endif /* CONFIG_KRETPROBES */
void __kprobes unregister_kretprobe(struct kretprobe *rp)
{
{
struct marker_entry *entry;
struct marker_probe_closure *old;
- int ret = 0;
+ int ret = -ENOENT;
mutex_lock(&markers_mutex);
entry = get_marker(name);
- if (!entry) {
- ret = -ENOENT;
+ if (!entry)
goto end;
- }
if (entry->rcu_pending)
rcu_barrier();
old = marker_entry_remove_probe(entry, probe, probe_private);
marker_update_probes(); /* may update entry */
mutex_lock(&markers_mutex);
entry = get_marker(name);
+ if (!entry)
+ goto end;
entry->oldptr = old;
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
call_rcu(&entry->rcu, free_old_closure);
remove_marker(name); /* Ignore busy error message */
+ ret = 0;
end:
mutex_unlock(&markers_mutex);
return ret;
/* Set up license info based on the info section */
set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
+ /*
+ * ndiswrapper is under GPL by itself, but loads proprietary modules.
+ * Don't use add_taint_module(), as it would prevent ndiswrapper from
+ * using GPL-only symbols it needs.
+ */
if (strcmp(mod->name, "ndiswrapper") == 0)
- add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
+ add_taint(TAINT_PROPRIETARY_MODULE);
+
+ /* driverloader was caught wrongly pretending to be under GPL */
if (strcmp(mod->name, "driverloader") == 0)
add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
__set_current_state(save);
}
-static void fake_signal_wake_up(struct task_struct *p, int resume)
+static void fake_signal_wake_up(struct task_struct *p)
{
unsigned long flags;
spin_lock_irqsave(&p->sighand->siglock, flags);
- signal_wake_up(p, resume);
+ signal_wake_up(p, 0);
spin_unlock_irqrestore(&p->sighand->siglock, flags);
}
-static void send_fake_signal(struct task_struct *p)
-{
- if (task_is_stopped(p))
- force_sig_specific(SIGSTOP, p);
- fake_signal_wake_up(p, task_is_stopped(p));
-}
-
static int has_mm(struct task_struct *p)
{
return (p->mm && !(p->flags & PF_BORROWED_MM));
if (freezing(p)) {
if (has_mm(p)) {
if (!signal_pending(p))
- fake_signal_wake_up(p, 0);
+ fake_signal_wake_up(p);
} else {
if (with_mm_only)
ret = 0;
} else {
if (has_mm(p)) {
set_freeze_flag(p);
- send_fake_signal(p);
+ fake_signal_wake_up(p);
} else {
if (with_mm_only) {
ret = 0;
if (frozen(p) || !freezeable(p))
continue;
- if (task_is_traced(p) && frozen(p->parent)) {
- cancel_freezing(p);
- continue;
- }
-
if (!freeze_task(p, freeze_user_space))
continue;
- if (!freezer_should_skip(p))
+ /*
+ * Now that we've done set_freeze_flag, don't
+ * perturb a task in TASK_STOPPED or TASK_TRACED.
+ * It is "frozen enough". If the task does wake
+ * up, it will immediately call try_to_freeze.
+ */
+ if (!task_is_stopped_or_traced(p) &&
+ !freezer_should_skip(p))
todo++;
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
ret = -EINVAL;
+ strstrip(buf);
if (write_strategy) {
if (write_strategy(buf, &tmp)) {
goto out_free;
struct sched_entity **se;
/* runqueue "owned" by this group on each cpu */
struct cfs_rq **cfs_rq;
-
- /*
- * shares assigned to a task group governs how much of cpu bandwidth
- * is allocated to the group. The more shares a group has, the more is
- * the cpu bandwidth allocated to it.
- *
- * For ex, lets say that there are three task groups, A, B and C which
- * have been assigned shares 1000, 2000 and 3000 respectively. Then,
- * cpu bandwidth allocated by the scheduler to task groups A, B and C
- * should be:
- *
- * Bw(A) = 1000/(1000+2000+3000) * 100 = 16.66%
- * Bw(B) = 2000/(1000+2000+3000) * 100 = 33.33%
- * Bw(C) = 3000/(1000+2000+3000) * 100 = 50%
- *
- * The weight assigned to a task group's schedulable entities on every
- * cpu (task_group.se[a_cpu]->load.weight) is derived from the task
- * group's shares. For ex: lets say that task group A has been
- * assigned shares of 1000 and there are two CPUs in a system. Then,
- *
- * tg_A->se[0]->load.weight = tg_A->se[1]->load.weight = 1000;
- *
- * Note: It's not necessary that each of a task's group schedulable
- * entity have the same weight on all CPUs. If the group
- * has 2 of its tasks on CPU0 and 1 task on CPU1, then a
- * better distribution of weight could be:
- *
- * tg_A->se[0]->load.weight = 2/3 * 2000 = 1333
- * tg_A->se[1]->load.weight = 1/2 * 2000 = 667
- *
- * rebalance_shares() is responsible for distributing the shares of a
- * task groups like this among the group's schedulable entities across
- * cpus.
- *
- */
unsigned long shares;
#endif
static DEFINE_MUTEX(doms_cur_mutex);
#ifdef CONFIG_FAIR_GROUP_SCHED
-#ifdef CONFIG_SMP
-/* kernel thread that runs rebalance_shares() periodically */
-static struct task_struct *lb_monitor_task;
-static int load_balance_monitor(void *unused);
-#endif
-
-static void set_se_shares(struct sched_entity *se, unsigned long shares);
-
#ifdef CONFIG_USER_SCHED
# define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD)
#else
# define INIT_TASK_GROUP_LOAD NICE_0_LOAD
#endif
-#define MIN_GROUP_SHARES 2
-
static int init_task_group_load = INIT_TASK_GROUP_LOAD;
#endif
static inline void cpuacct_charge(struct task_struct *tsk, u64 cputime) {}
#endif
-static inline void inc_cpu_load(struct rq *rq, unsigned long load)
-{
- update_load_add(&rq->load, load);
-}
-
-static inline void dec_cpu_load(struct rq *rq, unsigned long load)
-{
- update_load_sub(&rq->load, load);
-}
-
#ifdef CONFIG_SMP
static unsigned long source_load(int cpu, int type);
static unsigned long target_load(int cpu, int type);
#define sched_class_highest (&rt_sched_class)
-static void inc_nr_running(struct rq *rq)
+static inline void inc_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_add(&rq->load, p->se.load.weight);
+}
+
+static inline void dec_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_sub(&rq->load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running++;
+ inc_load(rq, p);
}
-static void dec_nr_running(struct rq *rq)
+static void dec_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running--;
+ dec_load(rq, p);
}
static void set_load_weight(struct task_struct *p)
rq->nr_uninterruptible--;
enqueue_task(rq, p, wakeup);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
/*
rq->nr_uninterruptible++;
dequeue_task(rq, p, sleep);
- dec_nr_running(rq);
+ dec_nr_running(p, rq);
}
/**
* management (if any):
*/
p->sched_class->task_new(rq, p);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
check_preempt_curr(rq, p);
#ifdef CONFIG_SMP
goto out_unlock;
}
on_rq = p->se.on_rq;
- if (on_rq)
+ if (on_rq) {
dequeue_task(rq, p, 0);
+ dec_load(rq, p);
+ }
p->static_prio = NICE_TO_PRIO(nice);
set_load_weight(p);
if (on_rq) {
enqueue_task(rq, p, 0);
+ inc_load(rq, p);
/*
* If the task increased its priority or is running and
* lowered its priority, then reschedule its CPU:
if (set_cpus_allowed(current, non_isolated_cpus) < 0)
BUG();
sched_init_granularity();
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
- if (nr_cpu_ids == 1)
- return;
-
- lb_monitor_task = kthread_create(load_balance_monitor, NULL,
- "group_balance");
- if (!IS_ERR(lb_monitor_task)) {
- lb_monitor_task->flags |= PF_NOFREEZE;
- wake_up_process(lb_monitor_task);
- } else {
- printk(KERN_ERR "Could not create load balance monitor thread"
- "(error = %ld) \n", PTR_ERR(lb_monitor_task));
- }
-#endif
}
#else
void __init sched_init_smp(void)
#ifdef CONFIG_GROUP_SCHED
-#if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP
-/*
- * distribute shares of all task groups among their schedulable entities,
- * to reflect load distribution across cpus.
- */
-static int rebalance_shares(struct sched_domain *sd, int this_cpu)
-{
- struct cfs_rq *cfs_rq;
- struct rq *rq = cpu_rq(this_cpu);
- cpumask_t sdspan = sd->span;
- int balanced = 1;
-
- /* Walk thr' all the task groups that we have */
- for_each_leaf_cfs_rq(rq, cfs_rq) {
- int i;
- unsigned long total_load = 0, total_shares;
- struct task_group *tg = cfs_rq->tg;
-
- /* Gather total task load of this group across cpus */
- for_each_cpu_mask(i, sdspan)
- total_load += tg->cfs_rq[i]->load.weight;
-
- /* Nothing to do if this group has no load */
- if (!total_load)
- continue;
-
- /*
- * tg->shares represents the number of cpu shares the task group
- * is eligible to hold on a single cpu. On N cpus, it is
- * eligible to hold (N * tg->shares) number of cpu shares.
- */
- total_shares = tg->shares * cpus_weight(sdspan);
-
- /*
- * redistribute total_shares across cpus as per the task load
- * distribution.
- */
- for_each_cpu_mask(i, sdspan) {
- unsigned long local_load, local_shares;
-
- local_load = tg->cfs_rq[i]->load.weight;
- local_shares = (local_load * total_shares) / total_load;
- if (!local_shares)
- local_shares = MIN_GROUP_SHARES;
- if (local_shares == tg->se[i]->load.weight)
- continue;
-
- spin_lock_irq(&cpu_rq(i)->lock);
- set_se_shares(tg->se[i], local_shares);
- spin_unlock_irq(&cpu_rq(i)->lock);
- balanced = 0;
- }
- }
-
- return balanced;
-}
-
-/*
- * How frequently should we rebalance_shares() across cpus?
- *
- * The more frequently we rebalance shares, the more accurate is the fairness
- * of cpu bandwidth distribution between task groups. However higher frequency
- * also implies increased scheduling overhead.
- *
- * sysctl_sched_min_bal_int_shares represents the minimum interval between
- * consecutive calls to rebalance_shares() in the same sched domain.
- *
- * sysctl_sched_max_bal_int_shares represents the maximum interval between
- * consecutive calls to rebalance_shares() in the same sched domain.
- *
- * These settings allows for the appropriate trade-off between accuracy of
- * fairness and the associated overhead.
- *
- */
-
-/* default: 8ms, units: milliseconds */
-const_debug unsigned int sysctl_sched_min_bal_int_shares = 8;
-
-/* default: 128ms, units: milliseconds */
-const_debug unsigned int sysctl_sched_max_bal_int_shares = 128;
-
-/* kernel thread that runs rebalance_shares() periodically */
-static int load_balance_monitor(void *unused)
-{
- unsigned int timeout = sysctl_sched_min_bal_int_shares;
- struct sched_param schedparm;
- int ret;
-
- /*
- * We don't want this thread's execution to be limited by the shares
- * assigned to default group (init_task_group). Hence make it run
- * as a SCHED_RR RT task at the lowest priority.
- */
- schedparm.sched_priority = 1;
- ret = sched_setscheduler(current, SCHED_RR, &schedparm);
- if (ret)
- printk(KERN_ERR "Couldn't set SCHED_RR policy for load balance"
- " monitor thread (error = %d) \n", ret);
-
- while (!kthread_should_stop()) {
- int i, cpu, balanced = 1;
-
- /* Prevent cpus going down or coming up */
- get_online_cpus();
- /* lockout changes to doms_cur[] array */
- lock_doms_cur();
- /*
- * Enter a rcu read-side critical section to safely walk rq->sd
- * chain on various cpus and to walk task group list
- * (rq->leaf_cfs_rq_list) in rebalance_shares().
- */
- rcu_read_lock();
-
- for (i = 0; i < ndoms_cur; i++) {
- cpumask_t cpumap = doms_cur[i];
- struct sched_domain *sd = NULL, *sd_prev = NULL;
-
- cpu = first_cpu(cpumap);
-
- /* Find the highest domain at which to balance shares */
- for_each_domain(cpu, sd) {
- if (!(sd->flags & SD_LOAD_BALANCE))
- continue;
- sd_prev = sd;
- }
-
- sd = sd_prev;
- /* sd == NULL? No load balance reqd in this domain */
- if (!sd)
- continue;
-
- balanced &= rebalance_shares(sd, cpu);
- }
-
- rcu_read_unlock();
-
- unlock_doms_cur();
- put_online_cpus();
-
- if (!balanced)
- timeout = sysctl_sched_min_bal_int_shares;
- else if (timeout < sysctl_sched_max_bal_int_shares)
- timeout *= 2;
-
- msleep_interruptible(timeout);
- }
-
- return 0;
-}
-#endif /* CONFIG_SMP */
-
#ifdef CONFIG_FAIR_GROUP_SCHED
static void free_fair_sched_group(struct task_group *tg)
{
}
#ifdef CONFIG_FAIR_GROUP_SCHED
-/* rq->lock to be locked by caller */
static void set_se_shares(struct sched_entity *se, unsigned long shares)
{
struct cfs_rq *cfs_rq = se->cfs_rq;
struct rq *rq = cfs_rq->rq;
int on_rq;
- if (!shares)
- shares = MIN_GROUP_SHARES;
+ spin_lock_irq(&rq->lock);
on_rq = se->on_rq;
- if (on_rq) {
+ if (on_rq)
dequeue_entity(cfs_rq, se, 0);
- dec_cpu_load(rq, se->load.weight);
- }
se->load.weight = shares;
se->load.inv_weight = div64_64((1ULL<<32), shares);
- if (on_rq) {
+ if (on_rq)
enqueue_entity(cfs_rq, se, 0);
- inc_cpu_load(rq, se->load.weight);
- }
+
+ spin_unlock_irq(&rq->lock);
}
static DEFINE_MUTEX(shares_mutex);
int i;
unsigned long flags;
+ /*
+ * A weight of 0 or 1 can cause arithmetics problems.
+ * (The default weight is 1024 - so there's no practical
+ * limitation from this.)
+ */
+ if (shares < 2)
+ shares = 2;
+
mutex_lock(&shares_mutex);
if (tg->shares == shares)
goto done;
- if (shares < MIN_GROUP_SHARES)
- shares = MIN_GROUP_SHARES;
-
- /*
- * Prevent any load balance activity (rebalance_shares,
- * load_balance_fair) from referring to this group first,
- * by taking it off the rq->leaf_cfs_rq_list on each cpu.
- */
spin_lock_irqsave(&task_group_lock, flags);
for_each_possible_cpu(i)
unregister_fair_sched_group(tg, i);
* w/o tripping rebalance_share or load_balance_fair.
*/
tg->shares = shares;
- for_each_possible_cpu(i) {
- spin_lock_irq(&cpu_rq(i)->lock);
+ for_each_possible_cpu(i)
set_se_shares(tg->se[i], shares);
- spin_unlock_irq(&cpu_rq(i)->lock);
- }
/*
* Enable load balance activity on this group, by inserting it back on
return se->parent;
}
-#define GROUP_IMBALANCE_PCT 20
-
#else /* CONFIG_FAIR_GROUP_SCHED */
#define for_each_sched_entity(se) \
static void enqueue_task_fair(struct rq *rq, struct task_struct *p, int wakeup)
{
struct cfs_rq *cfs_rq;
- struct sched_entity *se = &p->se,
- *topse = NULL; /* Highest schedulable entity */
- int incload = 1;
+ struct sched_entity *se = &p->se;
for_each_sched_entity(se) {
- topse = se;
- if (se->on_rq) {
- incload = 0;
+ if (se->on_rq)
break;
- }
cfs_rq = cfs_rq_of(se);
enqueue_entity(cfs_rq, se, wakeup);
wakeup = 1;
}
- /* Increment cpu load if we just enqueued the first task of a group on
- * 'rq->cpu'. 'topse' represents the group to which task 'p' belongs
- * at the highest grouping level.
- */
- if (incload)
- inc_cpu_load(rq, topse->load.weight);
hrtick_start_fair(rq, rq->curr);
}
static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int sleep)
{
struct cfs_rq *cfs_rq;
- struct sched_entity *se = &p->se,
- *topse = NULL; /* Highest schedulable entity */
- int decload = 1;
+ struct sched_entity *se = &p->se;
for_each_sched_entity(se) {
- topse = se;
cfs_rq = cfs_rq_of(se);
dequeue_entity(cfs_rq, se, sleep);
/* Don't dequeue parent if it has other entities besides us */
- if (cfs_rq->load.weight) {
- if (parent_entity(se))
- decload = 0;
+ if (cfs_rq->load.weight)
break;
- }
sleep = 1;
}
- /* Decrement cpu load if we just dequeued the last task of a group on
- * 'rq->cpu'. 'topse' represents the group to which task 'p' belongs
- * at the highest grouping level.
- */
- if (decload)
- dec_cpu_load(rq, topse->load.weight);
hrtick_start_fair(rq, rq->curr);
}
return __load_balance_iterator(cfs_rq, cfs_rq->rb_load_balance_curr);
}
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static int cfs_rq_best_prio(struct cfs_rq *cfs_rq)
+{
+ struct sched_entity *curr;
+ struct task_struct *p;
+
+ if (!cfs_rq->nr_running || !first_fair(cfs_rq))
+ return MAX_PRIO;
+
+ curr = cfs_rq->curr;
+ if (!curr)
+ curr = __pick_next_entity(cfs_rq);
+
+ p = task_of(curr);
+
+ return p->prio;
+}
+#endif
+
static unsigned long
load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move,
struct cfs_rq *busy_cfs_rq;
long rem_load_move = max_load_move;
struct rq_iterator cfs_rq_iterator;
- unsigned long load_moved;
cfs_rq_iterator.start = load_balance_start_fair;
cfs_rq_iterator.next = load_balance_next_fair;
for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
#ifdef CONFIG_FAIR_GROUP_SCHED
- struct cfs_rq *this_cfs_rq = busy_cfs_rq->tg->cfs_rq[this_cpu];
- unsigned long maxload, task_load, group_weight;
- unsigned long thisload, per_task_load;
- struct sched_entity *se = busy_cfs_rq->tg->se[busiest->cpu];
-
- task_load = busy_cfs_rq->load.weight;
- group_weight = se->load.weight;
+ struct cfs_rq *this_cfs_rq;
+ long imbalance;
+ unsigned long maxload;
- /*
- * 'group_weight' is contributed by tasks of total weight
- * 'task_load'. To move 'rem_load_move' worth of weight only,
- * we need to move a maximum task load of:
- *
- * maxload = (remload / group_weight) * task_load;
- */
- maxload = (rem_load_move * task_load) / group_weight;
+ this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu);
- if (!maxload || !task_load)
+ imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight;
+ /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */
+ if (imbalance <= 0)
continue;
- per_task_load = task_load / busy_cfs_rq->nr_running;
- /*
- * balance_tasks will try to forcibly move atleast one task if
- * possible (because of SCHED_LOAD_SCALE_FUZZ). Avoid that if
- * maxload is less than GROUP_IMBALANCE_FUZZ% the per_task_load.
- */
- if (100 * maxload < GROUP_IMBALANCE_PCT * per_task_load)
- continue;
+ /* Don't pull more than imbalance/2 */
+ imbalance /= 2;
+ maxload = min(rem_load_move, imbalance);
- /* Disable priority-based load balance */
- *this_best_prio = 0;
- thisload = this_cfs_rq->load.weight;
+ *this_best_prio = cfs_rq_best_prio(this_cfs_rq);
#else
# define maxload rem_load_move
#endif
* load_balance_[start|next]_fair iterators
*/
cfs_rq_iterator.arg = busy_cfs_rq;
- load_moved = balance_tasks(this_rq, this_cpu, busiest,
+ rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
maxload, sd, idle, all_pinned,
this_best_prio,
&cfs_rq_iterator);
-#ifdef CONFIG_FAIR_GROUP_SCHED
- /*
- * load_moved holds the task load that was moved. The
- * effective (group) weight moved would be:
- * load_moved_eff = load_moved/task_load * group_weight;
- */
- load_moved = (group_weight * load_moved) / task_load;
-
- /* Adjust shares on both cpus to reflect load_moved */
- group_weight -= load_moved;
- set_se_shares(se, group_weight);
-
- se = busy_cfs_rq->tg->se[this_cpu];
- if (!thisload)
- group_weight = load_moved;
- else
- group_weight = se->load.weight + load_moved;
- set_se_shares(se, group_weight);
-#endif
-
- rem_load_move -= load_moved;
-
if (rem_load_move <= 0)
break;
}
*/
for_each_sched_rt_entity(rt_se)
enqueue_rt_entity(rt_se);
-
- inc_cpu_load(rq, p->se.load.weight);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
if (rt_rq && rt_rq->rt_nr_running)
enqueue_rt_entity(rt_se);
}
-
- dec_cpu_load(rq, p->se.load.weight);
}
/*
/* Let the debugger run. */
__set_current_state(TASK_TRACED);
spin_unlock_irq(¤t->sighand->siglock);
- try_to_freeze();
read_lock(&tasklist_lock);
if (!unlikely(killed) && may_ptrace_stop()) {
do_notify_parent_cldstop(current, CLD_TRAPPED);
read_unlock(&tasklist_lock);
}
+ /*
+ * While in TASK_TRACED, we were considered "frozen enough".
+ * Now that we woke up, it's crucial if we're supposed to be
+ * frozen that we freeze now before running anything substantial.
+ */
+ try_to_freeze();
+
/*
* We are back. Now reacquire the siglock before touching
* last_siginfo, so that we are sure to have synchronized with
sigset_t *mask = ¤t->blocked;
int signr = 0;
+relock:
+ /*
+ * We'll jump back here after any time we were stopped in TASK_STOPPED.
+ * While in TASK_STOPPED, we were considered "frozen enough".
+ * Now that we woke up, it's crucial if we're supposed to be
+ * frozen that we freeze now before running anything substantial.
+ */
try_to_freeze();
-relock:
spin_lock_irq(¤t->sighand->siglock);
for (;;) {
struct k_sigaction *ka;
.mode = 0644,
.proc_handler = &proc_dointvec,
},
-#if defined(CONFIG_FAIR_GROUP_SCHED) && defined(CONFIG_SMP)
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "sched_min_bal_int_shares",
- .data = &sysctl_sched_min_bal_int_shares,
- .maxlen = sizeof(unsigned int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "sched_max_bal_int_shares",
- .data = &sysctl_sched_max_bal_int_shares,
- .maxlen = sizeof(unsigned int),
- .mode = 0644,
- .proc_handler = &proc_dointvec,
- },
-#endif
#endif
{
.ctl_name = CTL_UNNUMBERED,
}
}
-static inline int is_span_boundary(unsigned int index, unsigned int nr,
- unsigned long shift,
- unsigned long boundary_size)
+int iommu_is_span_boundary(unsigned int index, unsigned int nr,
+ unsigned long shift,
+ unsigned long boundary_size)
{
+ BUG_ON(!is_power_of_2(boundary_size));
+
shift = (shift + index) & (boundary_size - 1);
return shift + nr > boundary_size;
}
again:
index = find_next_zero_area(map, size, start, nr, align_mask);
if (index != -1) {
- if (is_span_boundary(index, nr, shift, boundary_size)) {
+ if (iommu_is_span_boundary(index, nr, shift, boundary_size)) {
/* we could do more effectively */
start = index + 1;
goto again;
return;
kref_init(&kobj->kref);
INIT_LIST_HEAD(&kobj->entry);
+ kobj->state_in_sysfs = 0;
+ kobj->state_add_uevent_sent = 0;
+ kobj->state_remove_uevent_sent = 0;
+ kobj->state_initialized = 1;
}
dump_stack();
}
- kref_init(&kobj->kref);
- INIT_LIST_HEAD(&kobj->entry);
+ kobject_init_internal(kobj);
kobj->ktype = ktype;
- kobj->state_in_sysfs = 0;
- kobj->state_add_uevent_sent = 0;
- kobj->state_remove_uevent_sent = 0;
- kobj->state_initialized = 1;
return;
error:
obj-$(CONFIG_MIGRATION) += migrate.o
obj-$(CONFIG_SMP) += allocpercpu.o
obj-$(CONFIG_QUICKLIST) += quicklist.o
-obj-$(CONFIG_CGROUP_MEM_CONT) += memcontrol.o
+obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o
#include <linux/mm.h>
#include <linux/module.h>
+#ifndef cache_line_size
+#define cache_line_size() L1_CACHE_BYTES
+#endif
+
/**
* percpu_depopulate - depopulate per-cpu data for given cpu
* @__pdata: per-cpu data to depopulate
struct percpu_data *pdata = __percpu_disguise(__pdata);
int node = cpu_to_node(cpu);
+ /*
+ * We should make sure each CPU gets private memory.
+ */
+ size = roundup(size, cache_line_size());
+
BUG_ON(pdata->ptrs[cpu]);
if (node_online(node))
pdata->ptrs[cpu] = kmalloc_node(size, gfp|__GFP_ZERO, node);
*/
void *__percpu_alloc_mask(size_t size, gfp_t gfp, cpumask_t *mask)
{
- void *pdata = kzalloc(nr_cpu_ids * sizeof(void *), gfp);
+ /*
+ * We allocate whole cache lines to avoid false sharing
+ */
+ size_t sz = roundup(nr_cpu_ids * sizeof(void *), cache_line_size());
+ void *pdata = kzalloc(sz, gfp);
void *__pdata = __percpu_disguise(pdata);
if (unlikely(!pdata))
free_huge_pages_node[nid]++;
}
-static struct page *dequeue_huge_page(struct vm_area_struct *vma,
+static struct page *dequeue_huge_page(void)
+{
+ int nid;
+ struct page *page = NULL;
+
+ for (nid = 0; nid < MAX_NUMNODES; ++nid) {
+ if (!list_empty(&hugepage_freelists[nid])) {
+ page = list_entry(hugepage_freelists[nid].next,
+ struct page, lru);
+ list_del(&page->lru);
+ free_huge_pages--;
+ free_huge_pages_node[nid]--;
+ break;
+ }
+ }
+ return page;
+}
+
+static struct page *dequeue_huge_page_vma(struct vm_area_struct *vma,
unsigned long address)
{
int nid;
int needed, allocated;
needed = (resv_huge_pages + delta) - free_huge_pages;
- if (needed <= 0)
+ if (needed <= 0) {
+ resv_huge_pages += delta;
return 0;
+ }
allocated = 0;
INIT_LIST_HEAD(&surplus_list);
* The surplus_list now contains _at_least_ the number of extra pages
* needed to accomodate the reservation. Add the appropriate number
* of pages to the hugetlb pool and free the extras back to the buddy
- * allocator.
+ * allocator. Commit the entire reservation here to prevent another
+ * process from stealing the pages as they are added to the pool but
+ * before they are reserved.
*/
needed += allocated;
+ resv_huge_pages += delta;
ret = 0;
free:
list_for_each_entry_safe(page, tmp, &surplus_list, lru) {
struct page *page;
unsigned long nr_pages;
+ /* Uncommit the reservation */
+ resv_huge_pages -= unused_resv_pages;
+
nr_pages = min(unused_resv_pages, surplus_huge_pages);
while (nr_pages) {
struct page *page;
spin_lock(&hugetlb_lock);
- page = dequeue_huge_page(vma, addr);
+ page = dequeue_huge_page_vma(vma, addr);
spin_unlock(&hugetlb_lock);
return page ? page : ERR_PTR(-VM_FAULT_OOM);
}
spin_lock(&hugetlb_lock);
if (free_huge_pages > resv_huge_pages)
- page = dequeue_huge_page(vma, addr);
+ page = dequeue_huge_page_vma(vma, addr);
spin_unlock(&hugetlb_lock);
if (!page) {
page = alloc_buddy_huge_page(vma, addr);
min_count = max(count, min_count);
try_to_free_low(min_count);
while (min_count < persistent_huge_pages) {
- struct page *page = dequeue_huge_page(NULL, 0);
+ struct page *page = dequeue_huge_page();
if (!page)
break;
update_and_free_page(page);
if (gather_surplus_pages(delta) < 0)
goto out;
- if (delta > cpuset_mems_nr(free_huge_pages_node))
+ if (delta > cpuset_mems_nr(free_huge_pages_node)) {
+ return_unused_surplus_pages(delta);
goto out;
+ }
}
ret = 0;
- resv_huge_pages += delta;
if (delta < 0)
return_unused_surplus_pages((unsigned long) -delta);
*/
struct mem_cgroup_stat stat;
};
+static struct mem_cgroup init_mem_cgroup;
/*
* We use the lower bit of the page->page_cgroup pointer as a bit spin
- * lock. We need to ensure that page->page_cgroup is atleast two
- * byte aligned (based on comments from Nick Piggin)
+ * lock. We need to ensure that page->page_cgroup is at least two
+ * byte aligned (based on comments from Nick Piggin). But since
+ * bit_spin_lock doesn't actually set that lock bit in a non-debug
+ * uniprocessor kernel, we should avoid setting it here too.
*/
#define PAGE_CGROUP_LOCK_BIT 0x0
-#define PAGE_CGROUP_LOCK (1 << PAGE_CGROUP_LOCK_BIT)
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+#define PAGE_CGROUP_LOCK (1 << PAGE_CGROUP_LOCK_BIT)
+#else
+#define PAGE_CGROUP_LOCK 0x0
+#endif
/*
* A page_cgroup page is associated with every page descriptor. The
struct list_head lru; /* per cgroup LRU list */
struct page *page;
struct mem_cgroup *mem_cgroup;
- atomic_t ref_cnt; /* Helpful when pages move b/w */
- /* mapped and cached states */
- int flags;
+ int ref_cnt; /* cached, mapped, migrating */
+ int flags;
};
#define PAGE_CGROUP_FLAG_CACHE (0x1) /* charged as cache */
#define PAGE_CGROUP_FLAG_ACTIVE (0x2) /* page is active in this cgroup */
-static inline int page_cgroup_nid(struct page_cgroup *pc)
+static int page_cgroup_nid(struct page_cgroup *pc)
{
return page_to_nid(pc->page);
}
-static inline enum zone_type page_cgroup_zid(struct page_cgroup *pc)
+static enum zone_type page_cgroup_zid(struct page_cgroup *pc)
{
return page_zonenum(pc->page);
}
-enum {
- MEM_CGROUP_TYPE_UNSPEC = 0,
- MEM_CGROUP_TYPE_MAPPED,
- MEM_CGROUP_TYPE_CACHED,
- MEM_CGROUP_TYPE_ALL,
- MEM_CGROUP_TYPE_MAX,
-};
-
enum charge_type {
MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
MEM_CGROUP_CHARGE_TYPE_MAPPED,
};
-
/*
* Always modified under lru lock. Then, not necessary to preempt_disable()
*/
{
int val = (charge)? 1 : -1;
struct mem_cgroup_stat *stat = &mem->stat;
- VM_BUG_ON(!irqs_disabled());
+ VM_BUG_ON(!irqs_disabled());
if (flags & PAGE_CGROUP_FLAG_CACHE)
- __mem_cgroup_stat_add_safe(stat,
- MEM_CGROUP_STAT_CACHE, val);
+ __mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_CACHE, val);
else
__mem_cgroup_stat_add_safe(stat, MEM_CGROUP_STAT_RSS, val);
}
-static inline struct mem_cgroup_per_zone *
+static struct mem_cgroup_per_zone *
mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
{
- BUG_ON(!mem->info.nodeinfo[nid]);
return &mem->info.nodeinfo[nid]->zoneinfo[zid];
}
-static inline struct mem_cgroup_per_zone *
+static struct mem_cgroup_per_zone *
page_cgroup_zoneinfo(struct page_cgroup *pc)
{
struct mem_cgroup *mem = pc->mem_cgroup;
return total;
}
-static struct mem_cgroup init_mem_cgroup;
-
-static inline
-struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
+static struct mem_cgroup *mem_cgroup_from_cont(struct cgroup *cont)
{
return container_of(cgroup_subsys_state(cont,
mem_cgroup_subsys_id), struct mem_cgroup,
css);
}
-static inline
-struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
+static struct mem_cgroup *mem_cgroup_from_task(struct task_struct *p)
{
return container_of(task_subsys_state(p, mem_cgroup_subsys_id),
struct mem_cgroup, css);
static inline int page_cgroup_locked(struct page *page)
{
- return bit_spin_is_locked(PAGE_CGROUP_LOCK_BIT,
- &page->page_cgroup);
+ return bit_spin_is_locked(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
-void page_assign_page_cgroup(struct page *page, struct page_cgroup *pc)
+static void page_assign_page_cgroup(struct page *page, struct page_cgroup *pc)
{
- int locked;
-
- /*
- * While resetting the page_cgroup we might not hold the
- * page_cgroup lock. free_hot_cold_page() is an example
- * of such a scenario
- */
- if (pc)
- VM_BUG_ON(!page_cgroup_locked(page));
- locked = (page->page_cgroup & PAGE_CGROUP_LOCK);
- page->page_cgroup = ((unsigned long)pc | locked);
+ VM_BUG_ON(!page_cgroup_locked(page));
+ page->page_cgroup = ((unsigned long)pc | PAGE_CGROUP_LOCK);
}
struct page_cgroup *page_get_page_cgroup(struct page *page)
{
- return (struct page_cgroup *)
- (page->page_cgroup & ~PAGE_CGROUP_LOCK);
+ return (struct page_cgroup *) (page->page_cgroup & ~PAGE_CGROUP_LOCK);
}
-static void __always_inline lock_page_cgroup(struct page *page)
+static void lock_page_cgroup(struct page *page)
{
bit_spin_lock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
- VM_BUG_ON(!page_cgroup_locked(page));
-}
-
-static void __always_inline unlock_page_cgroup(struct page *page)
-{
- bit_spin_unlock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
-/*
- * Tie new page_cgroup to struct page under lock_page_cgroup()
- * This can fail if the page has been tied to a page_cgroup.
- * If success, returns 0.
- */
-static int page_cgroup_assign_new_page_cgroup(struct page *page,
- struct page_cgroup *pc)
+static int try_lock_page_cgroup(struct page *page)
{
- int ret = 0;
-
- lock_page_cgroup(page);
- if (!page_get_page_cgroup(page))
- page_assign_page_cgroup(page, pc);
- else /* A page is tied to other pc. */
- ret = 1;
- unlock_page_cgroup(page);
- return ret;
+ return bit_spin_trylock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
-/*
- * Clear page->page_cgroup member under lock_page_cgroup().
- * If given "pc" value is different from one page->page_cgroup,
- * page->cgroup is not cleared.
- * Returns a value of page->page_cgroup at lock taken.
- * A can can detect failure of clearing by following
- * clear_page_cgroup(page, pc) == pc
- */
-
-static struct page_cgroup *clear_page_cgroup(struct page *page,
- struct page_cgroup *pc)
+static void unlock_page_cgroup(struct page *page)
{
- struct page_cgroup *ret;
- /* lock and clear */
- lock_page_cgroup(page);
- ret = page_get_page_cgroup(page);
- if (likely(ret == pc))
- page_assign_page_cgroup(page, NULL);
- unlock_page_cgroup(page);
- return ret;
+ bit_spin_unlock(PAGE_CGROUP_LOCK_BIT, &page->page_cgroup);
}
static void __mem_cgroup_remove_list(struct page_cgroup *pc)
int ret;
task_lock(task);
- ret = task->mm && vm_match_cgroup(task->mm, mem);
+ ret = task->mm && mm_match_cgroup(task->mm, mem);
task_unlock(task);
return ret;
}
/*
* This routine assumes that the appropriate zone's lru lock is already held
*/
-void mem_cgroup_move_lists(struct page_cgroup *pc, bool active)
+void mem_cgroup_move_lists(struct page *page, bool active)
{
+ struct page_cgroup *pc;
struct mem_cgroup_per_zone *mz;
unsigned long flags;
- if (!pc)
+ /*
+ * We cannot lock_page_cgroup while holding zone's lru_lock,
+ * because other holders of lock_page_cgroup can be interrupted
+ * with an attempt to rotate_reclaimable_page. But we cannot
+ * safely get to page_cgroup without it, so just try_lock it:
+ * mem_cgroup_isolate_pages allows for page left on wrong list.
+ */
+ if (!try_lock_page_cgroup(page))
return;
- mz = page_cgroup_zoneinfo(pc);
- spin_lock_irqsave(&mz->lru_lock, flags);
- __mem_cgroup_move_lists(pc, active);
- spin_unlock_irqrestore(&mz->lru_lock, flags);
+ pc = page_get_page_cgroup(page);
+ if (pc) {
+ mz = page_cgroup_zoneinfo(pc);
+ spin_lock_irqsave(&mz->lru_lock, flags);
+ __mem_cgroup_move_lists(pc, active);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+ }
+ unlock_page_cgroup(page);
}
/*
rss = (long)mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_RSS);
return (int)((rss * 100L) / total);
}
+
/*
* This function is called from vmscan.c. In page reclaiming loop. balance
* between active and inactive list is calculated. For memory controller
struct mem_cgroup_per_zone *mz = mem_cgroup_zoneinfo(mem, nid, zid);
nr_inactive = MEM_CGROUP_ZSTAT(mz, MEM_CGROUP_ZSTAT_INACTIVE);
-
return (nr_inactive >> priority);
}
* with it
*/
retry:
- if (page) {
- lock_page_cgroup(page);
- pc = page_get_page_cgroup(page);
- /*
- * The page_cgroup exists and
- * the page has already been accounted.
- */
- if (pc) {
- if (unlikely(!atomic_inc_not_zero(&pc->ref_cnt))) {
- /* this page is under being uncharged ? */
- unlock_page_cgroup(page);
- cpu_relax();
- goto retry;
- } else {
- unlock_page_cgroup(page);
- goto done;
- }
- }
+ lock_page_cgroup(page);
+ pc = page_get_page_cgroup(page);
+ /*
+ * The page_cgroup exists and
+ * the page has already been accounted.
+ */
+ if (pc) {
+ VM_BUG_ON(pc->page != page);
+ VM_BUG_ON(pc->ref_cnt <= 0);
+
+ pc->ref_cnt++;
unlock_page_cgroup(page);
+ goto done;
}
+ unlock_page_cgroup(page);
pc = kzalloc(sizeof(struct page_cgroup), gfp_mask);
if (pc == NULL)
rcu_read_lock();
mem = rcu_dereference(mm->mem_cgroup);
/*
- * For every charge from the cgroup, increment reference
- * count
+ * For every charge from the cgroup, increment reference count
*/
css_get(&mem->css);
rcu_read_unlock();
- /*
- * If we created the page_cgroup, we should free it on exceeding
- * the cgroup limit.
- */
while (res_counter_charge(&mem->res, PAGE_SIZE)) {
if (!(gfp_mask & __GFP_WAIT))
goto out;
continue;
/*
- * try_to_free_mem_cgroup_pages() might not give us a full
- * picture of reclaim. Some pages are reclaimed and might be
- * moved to swap cache or just unmapped from the cgroup.
- * Check the limit again to see if the reclaim reduced the
- * current usage of the cgroup before giving up
- */
+ * try_to_free_mem_cgroup_pages() might not give us a full
+ * picture of reclaim. Some pages are reclaimed and might be
+ * moved to swap cache or just unmapped from the cgroup.
+ * Check the limit again to see if the reclaim reduced the
+ * current usage of the cgroup before giving up
+ */
if (res_counter_check_under_limit(&mem->res))
continue;
congestion_wait(WRITE, HZ/10);
}
- atomic_set(&pc->ref_cnt, 1);
+ pc->ref_cnt = 1;
pc->mem_cgroup = mem;
pc->page = page;
pc->flags = PAGE_CGROUP_FLAG_ACTIVE;
if (ctype == MEM_CGROUP_CHARGE_TYPE_CACHE)
pc->flags |= PAGE_CGROUP_FLAG_CACHE;
- if (!page || page_cgroup_assign_new_page_cgroup(page, pc)) {
+ lock_page_cgroup(page);
+ if (page_get_page_cgroup(page)) {
+ unlock_page_cgroup(page);
/*
* Another charge has been added to this page already.
* We take lock_page_cgroup(page) again and read
res_counter_uncharge(&mem->res, PAGE_SIZE);
css_put(&mem->css);
kfree(pc);
- if (!page)
- goto done;
goto retry;
}
+ page_assign_page_cgroup(page, pc);
mz = page_cgroup_zoneinfo(pc);
spin_lock_irqsave(&mz->lru_lock, flags);
- /* Update statistics vector */
__mem_cgroup_add_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
+ unlock_page_cgroup(page);
done:
return 0;
out:
return -ENOMEM;
}
-int mem_cgroup_charge(struct page *page, struct mm_struct *mm,
- gfp_t gfp_mask)
+int mem_cgroup_charge(struct page *page, struct mm_struct *mm, gfp_t gfp_mask)
{
return mem_cgroup_charge_common(page, mm, gfp_mask,
- MEM_CGROUP_CHARGE_TYPE_MAPPED);
+ MEM_CGROUP_CHARGE_TYPE_MAPPED);
}
-/*
- * See if the cached pages should be charged at all?
- */
int mem_cgroup_cache_charge(struct page *page, struct mm_struct *mm,
gfp_t gfp_mask)
{
- int ret = 0;
if (!mm)
mm = &init_mm;
-
- ret = mem_cgroup_charge_common(page, mm, gfp_mask,
+ return mem_cgroup_charge_common(page, mm, gfp_mask,
MEM_CGROUP_CHARGE_TYPE_CACHE);
- return ret;
}
/*
* Uncharging is always a welcome operation, we never complain, simply
- * uncharge. This routine should be called with lock_page_cgroup held
+ * uncharge.
*/
-void mem_cgroup_uncharge(struct page_cgroup *pc)
+void mem_cgroup_uncharge_page(struct page *page)
{
+ struct page_cgroup *pc;
struct mem_cgroup *mem;
struct mem_cgroup_per_zone *mz;
- struct page *page;
unsigned long flags;
/*
* Check if our page_cgroup is valid
*/
+ lock_page_cgroup(page);
+ pc = page_get_page_cgroup(page);
if (!pc)
- return;
+ goto unlock;
- if (atomic_dec_and_test(&pc->ref_cnt)) {
- page = pc->page;
+ VM_BUG_ON(pc->page != page);
+ VM_BUG_ON(pc->ref_cnt <= 0);
+
+ if (--(pc->ref_cnt) == 0) {
mz = page_cgroup_zoneinfo(pc);
- /*
- * get page->cgroup and clear it under lock.
- * force_empty can drop page->cgroup without checking refcnt.
- */
+ spin_lock_irqsave(&mz->lru_lock, flags);
+ __mem_cgroup_remove_list(pc);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+
+ page_assign_page_cgroup(page, NULL);
unlock_page_cgroup(page);
- if (clear_page_cgroup(page, pc) == pc) {
- mem = pc->mem_cgroup;
- css_put(&mem->css);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- spin_lock_irqsave(&mz->lru_lock, flags);
- __mem_cgroup_remove_list(pc);
- spin_unlock_irqrestore(&mz->lru_lock, flags);
- kfree(pc);
- }
- lock_page_cgroup(page);
+
+ mem = pc->mem_cgroup;
+ res_counter_uncharge(&mem->res, PAGE_SIZE);
+ css_put(&mem->css);
+
+ kfree(pc);
+ return;
}
-}
-void mem_cgroup_uncharge_page(struct page *page)
-{
- lock_page_cgroup(page);
- mem_cgroup_uncharge(page_get_page_cgroup(page));
+unlock:
unlock_page_cgroup(page);
}
* Returns non-zero if a page (under migration) has valid page_cgroup member.
* Refcnt of page_cgroup is incremented.
*/
-
int mem_cgroup_prepare_migration(struct page *page)
{
struct page_cgroup *pc;
- int ret = 0;
+
lock_page_cgroup(page);
pc = page_get_page_cgroup(page);
- if (pc && atomic_inc_not_zero(&pc->ref_cnt))
- ret = 1;
+ if (pc)
+ pc->ref_cnt++;
unlock_page_cgroup(page);
- return ret;
+ return pc != NULL;
}
void mem_cgroup_end_migration(struct page *page)
{
- struct page_cgroup *pc;
-
- lock_page_cgroup(page);
- pc = page_get_page_cgroup(page);
- mem_cgroup_uncharge(pc);
- unlock_page_cgroup(page);
+ mem_cgroup_uncharge_page(page);
}
+
/*
- * We know both *page* and *newpage* are now not-on-LRU and Pg_locked.
+ * We know both *page* and *newpage* are now not-on-LRU and PG_locked.
* And no race with uncharge() routines because page_cgroup for *page*
* has extra one reference by mem_cgroup_prepare_migration.
*/
-
void mem_cgroup_page_migration(struct page *page, struct page *newpage)
{
struct page_cgroup *pc;
- struct mem_cgroup *mem;
- unsigned long flags;
struct mem_cgroup_per_zone *mz;
-retry:
+ unsigned long flags;
+
+ lock_page_cgroup(page);
pc = page_get_page_cgroup(page);
- if (!pc)
+ if (!pc) {
+ unlock_page_cgroup(page);
return;
- mem = pc->mem_cgroup;
+ }
+
mz = page_cgroup_zoneinfo(pc);
- if (clear_page_cgroup(page, pc) != pc)
- goto retry;
spin_lock_irqsave(&mz->lru_lock, flags);
-
__mem_cgroup_remove_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
+ page_assign_page_cgroup(page, NULL);
+ unlock_page_cgroup(page);
+
pc->page = newpage;
lock_page_cgroup(newpage);
page_assign_page_cgroup(newpage, pc);
- unlock_page_cgroup(newpage);
mz = page_cgroup_zoneinfo(pc);
spin_lock_irqsave(&mz->lru_lock, flags);
__mem_cgroup_add_list(pc);
spin_unlock_irqrestore(&mz->lru_lock, flags);
- return;
+
+ unlock_page_cgroup(newpage);
}
/*
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
*/
#define FORCE_UNCHARGE_BATCH (128)
-static void
-mem_cgroup_force_empty_list(struct mem_cgroup *mem,
+static void mem_cgroup_force_empty_list(struct mem_cgroup *mem,
struct mem_cgroup_per_zone *mz,
int active)
{
struct page_cgroup *pc;
struct page *page;
- int count;
+ int count = FORCE_UNCHARGE_BATCH;
unsigned long flags;
struct list_head *list;
else
list = &mz->inactive_list;
- if (list_empty(list))
- return;
-retry:
- count = FORCE_UNCHARGE_BATCH;
spin_lock_irqsave(&mz->lru_lock, flags);
-
- while (--count && !list_empty(list)) {
+ while (!list_empty(list)) {
pc = list_entry(list->prev, struct page_cgroup, lru);
page = pc->page;
- /* Avoid race with charge */
- atomic_set(&pc->ref_cnt, 0);
- if (clear_page_cgroup(page, pc) == pc) {
- css_put(&mem->css);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- __mem_cgroup_remove_list(pc);
- kfree(pc);
- } else /* being uncharged ? ...do relax */
- break;
+ get_page(page);
+ spin_unlock_irqrestore(&mz->lru_lock, flags);
+ mem_cgroup_uncharge_page(page);
+ put_page(page);
+ if (--count <= 0) {
+ count = FORCE_UNCHARGE_BATCH;
+ cond_resched();
+ }
+ spin_lock_irqsave(&mz->lru_lock, flags);
}
spin_unlock_irqrestore(&mz->lru_lock, flags);
- if (!list_empty(list)) {
- cond_resched();
- goto retry;
- }
- return;
}
/*
* make mem_cgroup's charge to be 0 if there is no task.
* This enables deleting this mem_cgroup.
*/
-
-int mem_cgroup_force_empty(struct mem_cgroup *mem)
+static int mem_cgroup_force_empty(struct mem_cgroup *mem)
{
int ret = -EBUSY;
int node, zid;
+
css_get(&mem->css);
/*
* page reclaim code (kswapd etc..) will move pages between
-` * active_list <-> inactive_list while we don't take a lock.
+ * active_list <-> inactive_list while we don't take a lock.
* So, we have to do loop here until all lists are empty.
*/
while (mem->res.usage > 0) {
return ret;
}
-
-
-int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
+static int mem_cgroup_write_strategy(char *buf, unsigned long long *tmp)
{
*tmp = memparse(buf, &buf);
if (*buf != '\0')
size_t nbytes, loff_t *ppos)
{
struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
- int ret;
- ret = mem_cgroup_force_empty(mem);
+ int ret = mem_cgroup_force_empty(mem);
if (!ret)
ret = nbytes;
return ret;
/*
* Note: This should be removed if cgroup supports write-only file.
*/
-
static ssize_t mem_force_empty_read(struct cgroup *cont,
struct cftype *cft,
struct file *file, char __user *userbuf,
return -EINVAL;
}
-
static const struct mem_cgroup_stat_desc {
const char *msg;
u64 unit;
return single_open(file, mem_control_stat_show, cont);
}
-
-
static struct cftype mem_cgroup_files[] = {
{
.name = "usage_in_bytes",
kfree(mem->info.nodeinfo[node]);
}
-
-static struct mem_cgroup init_mem_cgroup;
-
static struct cgroup_subsys_state *
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
out:
mmput(mm);
- return;
}
struct cgroup_subsys mem_cgroup_subsys = {
}
return ret;
oom_free_new:
- __free_page(new_page);
+ page_cache_release(new_page);
oom:
if (old_page)
page_cache_release(old_page);
unlock_page(page);
if (write_access) {
- /* XXX: We could OR the do_wp_page code with this one? */
- if (do_wp_page(mm, vma, address,
- page_table, pmd, ptl, pte) & VM_FAULT_OOM) {
- mem_cgroup_uncharge_page(page);
- ret = VM_FAULT_OOM;
- }
+ ret |= do_wp_page(mm, vma, address, page_table, pmd, ptl, pte);
+ if (ret & VM_FAULT_ERROR)
+ ret &= VM_FAULT_ERROR;
goto out;
}
page_cache_release(page);
goto unlock;
oom_free_page:
- __free_page(page);
+ page_cache_release(page);
oom:
return VM_FAULT_OOM;
}
return;
}
- if (mem_cgroup_charge(new, mm, GFP_KERNEL)) {
- pte_unmap(ptep);
- return;
- }
-
ptl = pte_lockptr(mm, pmd);
spin_lock(ptl);
pte = *ptep;
if (!is_migration_entry(entry) || migration_entry_to_page(entry) != old)
goto out;
+ /*
+ * Yes, ignore the return value from a GFP_ATOMIC mem_cgroup_charge.
+ * Failure is not an option here: we're now expected to remove every
+ * migration pte, and will cause crashes otherwise. Normally this
+ * is not an issue: mem_cgroup_prepare_migration bumped up the old
+ * page_cgroup count for safety, that's now attached to the new page,
+ * so this charge should just be another incrementation of the count,
+ * to keep in balance with rmap.c's mem_cgroup_uncharging. But if
+ * there's been a force_empty, those reference counts may no longer
+ * be reliable, and this charge can actually fail: oh well, we don't
+ * make the situation any worse by proceeding as if it had succeeded.
+ */
+ mem_cgroup_charge(new, mm, GFP_ATOMIC);
+
get_page(new);
pte = pte_mkold(mk_pte(new, vma->vm_page_prot));
if (is_write_migration_entry(entry))
return oom_kill_task(p);
}
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
{
unsigned long points = 0;
#include <linux/swap.h>
#include <linux/interrupt.h>
#include <linux/pagemap.h>
+#include <linux/jiffies.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
#include <linux/kernel.h>
static void bad_page(struct page *page)
{
- printk(KERN_EMERG "Bad page state in process '%s'\n"
- KERN_EMERG "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
- KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
- KERN_EMERG "Backtrace:\n",
+ void *pc = page_get_page_cgroup(page);
+
+ printk(KERN_EMERG "Bad page state in process '%s'\n" KERN_EMERG
+ "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n",
current->comm, page, (int)(2*sizeof(unsigned long)),
(unsigned long)page->flags, page->mapping,
page_mapcount(page), page_count(page));
+ if (pc) {
+ printk(KERN_EMERG "cgroup:%p\n", pc);
+ page_reset_bad_cgroup(page);
+ }
+ printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
+ KERN_EMERG "Backtrace:\n");
dump_stack();
page->flags &= ~(1 << PG_lru |
1 << PG_private |
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
+ (page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
(page->flags & (
1 << PG_lru |
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
+ (page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
(page->flags & (
1 << PG_lru |
if (!PageHighMem(page))
debug_check_no_locks_freed(page_address(page), PAGE_SIZE);
- VM_BUG_ON(page_get_page_cgroup(page));
arch_free_page(page, 0);
kernel_map_pages(page, 1, 0);
if (!zlc)
return NULL;
- if (jiffies - zlc->last_full_zap > 1 * HZ) {
+ if (time_after(jiffies, zlc->last_full_zap + HZ)) {
bitmap_zero(zlc->fullzones, MAX_ZONES_PER_ZONELIST);
zlc->last_full_zap = jiffies;
}
set_page_links(page, zone, nid, pfn);
init_page_count(page);
reset_page_mapcount(page);
- page_assign_page_cgroup(page, NULL);
SetPageReserved(page);
/*
* counting on behalf of references from different
* cgroups
*/
- if (mem_cont && !vm_match_cgroup(vma->vm_mm, mem_cont))
+ if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
referenced += page_referenced_one(page, vma, &mapcount);
if (!mapcount)
* counting on behalf of references from different
* cgroups
*/
- if (mem_cont && !vm_match_cgroup(vma->vm_mm, mem_cont))
+ if (mem_cont && !mm_match_cgroup(vma->vm_mm, mem_cont))
continue;
if ((vma->vm_flags & (VM_LOCKED|VM_MAYSHARE))
== (VM_LOCKED|VM_MAYSHARE)) {
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
unlock_page(swappage);
- page_cache_release(swappage);
if (error == -ENOMEM) {
/* allow reclaim from this memory cgroup */
- error = mem_cgroup_cache_charge(NULL,
+ error = mem_cgroup_cache_charge(swappage,
current->mm, gfp & ~__GFP_HIGHMEM);
- if (error)
+ if (error) {
+ page_cache_release(swappage);
goto failed;
+ }
+ mem_cgroup_uncharge_page(swappage);
}
+ page_cache_release(swappage);
goto repeat;
}
} else if (sgp == SGP_READ && !filepage) {
#endif
}
-/*
- * The end pointer in a slab is special. It points to the first object in the
- * slab but has bit 0 set to mark it.
- *
- * Note that SLUB relies on page_mapping returning NULL for pages with bit 0
- * in the mapping set.
- */
-static inline int is_end(void *addr)
-{
- return (unsigned long)addr & PAGE_MAPPING_ANON;
-}
-
-static void *slab_address(struct page *page)
-{
- return page->end - PAGE_MAPPING_ANON;
-}
-
+/* Verify that a pointer has an address that is valid within a slab page */
static inline int check_valid_pointer(struct kmem_cache *s,
struct page *page, const void *object)
{
void *base;
- if (object == page->end)
+ if (!object)
return 1;
- base = slab_address(page);
+ base = page_address(page);
if (object < base || object >= base + s->objects * s->size ||
(object - base) % s->size) {
return 0;
/* Scan freelist */
#define for_each_free_object(__p, __s, __free) \
- for (__p = (__free); (__p) != page->end; __p = get_freepointer((__s),\
- __p))
+ for (__p = (__free); __p; __p = get_freepointer((__s), __p))
/* Determine object index from a given position */
static inline int slab_index(void *p, struct kmem_cache *s, void *addr)
static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
{
unsigned int off; /* Offset of last byte */
- u8 *addr = slab_address(page);
+ u8 *addr = page_address(page);
print_tracking(s, p);
* A. Free pointer (if we cannot overwrite object on free)
* B. Tracking data for SLAB_STORE_USER
* C. Padding to reach required alignment boundary or at mininum
- * one word if debuggin is on to be able to detect writes
+ * one word if debugging is on to be able to detect writes
* before the word boundary.
*
* Padding is done using 0x5a (POISON_INUSE)
if (!(s->flags & SLAB_POISON))
return 1;
- start = slab_address(page);
+ start = page_address(page);
end = start + (PAGE_SIZE << s->order);
length = s->objects * s->size;
remainder = end - (start + length);
* of the free objects in this slab. May cause
* another error because the object count is now wrong.
*/
- set_freepointer(s, p, page->end);
+ set_freepointer(s, p, NULL);
return 0;
}
return 1;
void *fp = page->freelist;
void *object = NULL;
- while (fp != page->end && nr <= s->objects) {
+ while (fp && nr <= s->objects) {
if (fp == search)
return 1;
if (!check_valid_pointer(s, page, fp)) {
if (object) {
object_err(s, page, object,
"Freechain corrupt");
- set_freepointer(s, object, page->end);
+ set_freepointer(s, object, NULL);
break;
} else {
slab_err(s, page, "Freepointer corrupt");
- page->freelist = page->end;
+ page->freelist = NULL;
page->inuse = s->objects;
slab_fix(s, "Freelist cleared");
return 0;
if (!check_slab(s, page))
goto bad;
- if (object && !on_freelist(s, page, object)) {
+ if (!on_freelist(s, page, object)) {
object_err(s, page, object, "Object already allocated");
goto bad;
}
goto bad;
}
- if (object && !check_object(s, page, object, 0))
+ if (!check_object(s, page, object, 0))
goto bad;
/* Success perform special debug activities for allocs */
*/
slab_fix(s, "Marking all objects used");
page->inuse = s->objects;
- page->freelist = page->end;
+ page->freelist = NULL;
}
return 0;
}
}
/* Special debug activities for freeing objects */
- if (!SlabFrozen(page) && page->freelist == page->end)
+ if (!SlabFrozen(page) && !page->freelist)
remove_full(s, page);
if (s->flags & SLAB_STORE_USER)
set_track(s, object, TRACK_FREE, addr);
void (*ctor)(struct kmem_cache *, void *))
{
/*
- * The page->offset field is only 16 bit wide. This is an offset
- * in units of words from the beginning of an object. If the slab
- * size is bigger then we cannot move the free pointer behind the
- * object anymore.
- *
- * On 32 bit platforms the limit is 256k. On 64bit platforms
- * the limit is 512k.
- *
- * Debugging or ctor may create a need to move the free
- * pointer. Fail if this happens.
+ * Enable debugging if selected on the kernel commandline.
*/
- if (objsize >= 65535 * sizeof(void *)) {
- BUG_ON(flags & (SLAB_RED_ZONE | SLAB_POISON |
- SLAB_STORE_USER | SLAB_DESTROY_BY_RCU));
- BUG_ON(ctor);
- } else {
- /*
- * Enable debugging if selected on the kernel commandline.
- */
- if (slub_debug && (!slub_debug_slabs ||
- strncmp(slub_debug_slabs, name,
- strlen(slub_debug_slabs)) == 0))
- flags |= slub_debug;
- }
+ if (slub_debug && (!slub_debug_slabs ||
+ strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs)) == 0))
+ flags |= slub_debug;
return flags;
}
SetSlabDebug(page);
start = page_address(page);
- page->end = start + 1;
if (unlikely(s->flags & SLAB_POISON))
memset(start, POISON_INUSE, PAGE_SIZE << s->order);
last = p;
}
setup_object(s, page, last);
- set_freepointer(s, last, page->end);
+ set_freepointer(s, last, NULL);
page->freelist = start;
page->inuse = 0;
void *p;
slab_pad_check(s, page);
- for_each_object(p, s, slab_address(page))
+ for_each_object(p, s, page_address(page))
check_object(s, page, p, 0);
ClearSlabDebug(page);
}
NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE,
-pages);
- page->mapping = NULL;
__free_pages(page, s->order);
}
* may return off node objects because partial slabs are obtained
* from other nodes and filled up.
*
- * If /sys/slab/xx/defrag_ratio is set to 100 (which makes
+ * If /sys/kernel/slab/xx/defrag_ratio is set to 100 (which makes
* defrag_ratio = 1000) then every (well almost) allocation will
* first attempt to defrag slab caches on other nodes. This means
* scanning over all nodes to look for partial slabs which may be
ClearSlabFrozen(page);
if (page->inuse) {
- if (page->freelist != page->end) {
+ if (page->freelist) {
add_partial(n, page, tail);
stat(c, tail ? DEACTIVATE_TO_TAIL : DEACTIVATE_TO_HEAD);
} else {
* Adding an empty slab to the partial slabs in order
* to avoid page allocator overhead. This slab needs
* to come after the other slabs with objects in
- * order to fill them up. That way the size of the
- * partial list stays small. kmem_cache_shrink can
- * reclaim empty slabs from the partial list.
+ * so that the others get filled first. That way the
+ * size of the partial list stays small.
+ *
+ * kmem_cache_shrink can reclaim any empty slabs from the
+ * partial list.
*/
add_partial(n, page, 1);
slab_unlock(page);
if (c->freelist)
stat(c, DEACTIVATE_REMOTE_FREES);
/*
- * Merge cpu freelist into freelist. Typically we get here
+ * Merge cpu freelist into slab freelist. Typically we get here
* because both freelists are empty. So this is unlikely
* to occur.
- *
- * We need to use _is_end here because deactivate slab may
- * be called for a debug slab. Then c->freelist may contain
- * a dummy pointer.
*/
- while (unlikely(!is_end(c->freelist))) {
+ while (unlikely(c->freelist)) {
void **object;
tail = 0; /* Hot objects. Put the slab first */
/*
* Flush cpu slab.
+ *
* Called from IPI handler with interrupts disabled.
*/
static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu)
* rest of the freelist to the lockless freelist.
*
* And if we were unable to get a new slab from the partial slab lists then
- * we need to allocate a new slab. This is slowest path since we may sleep.
+ * we need to allocate a new slab. This is the slowest path since it involves
+ * a call to the page allocator and the setup of a new slab.
*/
static void *__slab_alloc(struct kmem_cache *s,
gfp_t gfpflags, int node, void *addr, struct kmem_cache_cpu *c)
slab_lock(c->page);
if (unlikely(!node_match(c, node)))
goto another_slab;
+
stat(c, ALLOC_REFILL);
+
load_freelist:
object = c->page->freelist;
- if (unlikely(object == c->page->end))
+ if (unlikely(!object))
goto another_slab;
if (unlikely(SlabDebug(c->page)))
goto debug;
- object = c->page->freelist;
c->freelist = object[c->offset];
c->page->inuse = s->objects;
- c->page->freelist = c->page->end;
+ c->page->freelist = NULL;
c->node = page_to_nid(c->page);
unlock_out:
slab_unlock(c->page);
return NULL;
debug:
- object = c->page->freelist;
if (!alloc_debug_processing(s, c->page, object, addr))
goto another_slab;
local_irq_save(flags);
c = get_cpu_slab(s, smp_processor_id());
- if (unlikely(is_end(c->freelist) || !node_match(c, node)))
+ if (unlikely(!c->freelist || !node_match(c, node)))
object = __slab_alloc(s, gfpflags, node, addr, c);
if (unlikely(SlabDebug(page)))
goto debug;
+
checks_ok:
prior = object[offset] = page->freelist;
page->freelist = object;
goto slab_empty;
/*
- * Objects left in the slab. If it
- * was not on the partial list before
+ * Objects left in the slab. If it was not on the partial list before
* then add it.
*/
- if (unlikely(prior == page->end)) {
+ if (unlikely(!prior)) {
add_partial(get_node(s, page_to_nid(page)), page, 1);
stat(c, FREE_ADD_PARTIAL);
}
return;
slab_empty:
- if (prior != page->end) {
+ if (prior) {
/*
* Slab still on the partial list.
*/
unsigned long flags;
local_irq_save(flags);
- debug_check_no_locks_freed(object, s->objsize);
c = get_cpu_slab(s, smp_processor_id());
+ debug_check_no_locks_freed(object, c->objsize);
if (likely(page == c->page && c->node >= 0)) {
object[c->offset] = c->freelist;
c->freelist = object;
unsigned long align, unsigned long size)
{
/*
- * If the user wants hardware cache aligned objects then
- * follow that suggestion if the object is sufficiently
- * large.
+ * If the user wants hardware cache aligned objects then follow that
+ * suggestion if the object is sufficiently large.
*
- * The hardware cache alignment cannot override the
- * specified alignment though. If that is greater
- * then use it.
+ * The hardware cache alignment cannot override the specified
+ * alignment though. If that is greater then use it.
*/
if ((flags & SLAB_HWCACHE_ALIGN) &&
size > cache_line_size() / 2)
struct kmem_cache_cpu *c)
{
c->page = NULL;
- c->freelist = (void *)PAGE_MAPPING_ANON;
+ c->freelist = NULL;
c->node = 0;
c->offset = s->offset / sizeof(void *);
c->objsize = s->objsize;
#endif
init_kmem_cache_node(n);
atomic_long_inc(&n->nr_slabs);
+
/*
* lockdep requires consistent irq usage for each lock
* so even though there cannot be a race this early in
unsigned long size = s->objsize;
unsigned long align = s->align;
+ /*
+ * Round up object size to the next word boundary. We can only
+ * place the free pointer at word boundaries and this determines
+ * the possible location of the free pointer.
+ */
+ size = ALIGN(size, sizeof(void *));
+
+#ifdef CONFIG_SLUB_DEBUG
/*
* Determine if we can poison the object itself. If the user of
* the slab may touch the object after free or before allocation
else
s->flags &= ~__OBJECT_POISON;
- /*
- * Round up object size to the next word boundary. We can only
- * place the free pointer at word boundaries and this determines
- * the possible location of the free pointer.
- */
- size = ALIGN(size, sizeof(void *));
-#ifdef CONFIG_SLUB_DEBUG
/*
* If we are Redzoning then check if there is some space between the
* end of the object and the free pointer. If not then add an
/*
* We could also check if the object is on the slabs freelist.
* But this would be too expensive and it seems that the main
- * purpose of kmem_ptr_valid is to check if the object belongs
+ * purpose of kmem_ptr_valid() is to check if the object belongs
* to a certain slab.
*/
return 1;
}
EXPORT_SYMBOL(__kmalloc);
+static void *kmalloc_large_node(size_t size, gfp_t flags, int node)
+{
+ struct page *page = alloc_pages_node(node, flags | __GFP_COMP,
+ get_order(size));
+
+ if (page)
+ return page_address(page);
+ else
+ return NULL;
+}
+
#ifdef CONFIG_NUMA
void *__kmalloc_node(size_t size, gfp_t flags, int node)
{
struct kmem_cache *s;
if (unlikely(size > PAGE_SIZE))
- return kmalloc_large(size, flags);
+ return kmalloc_large_node(size, flags, node);
s = get_slab(size, flags);
struct page *page;
struct kmem_cache *s;
- BUG_ON(!object);
if (unlikely(object == ZERO_SIZE_PTR))
return 0;
page = virt_to_head_page(object);
- BUG_ON(!page);
if (unlikely(!PageSlab(page)))
return PAGE_SIZE << compound_order(page);
s = page->slab;
- BUG_ON(!s);
+#ifdef CONFIG_SLUB_DEBUG
/*
* Debugging requires use of the padding between object
* and whatever may come after it.
if (s->flags & (SLAB_RED_ZONE | SLAB_POISON))
return s->objsize;
+#endif
/*
* If we have the need to store the freelist pointer
* back there or track user information then we can
*/
if (s->flags & (SLAB_DESTROY_BY_RCU | SLAB_STORE_USER))
return s->inuse;
-
/*
* Else we can use all the padding etc for the allocation
*/
/*
* Patch up the size_index table if we have strange large alignment
* requirements for the kmalloc array. This is only the case for
- * mips it seems. The standard arches will not generate any code here.
+ * MIPS it seems. The standard arches will not generate any code here.
*
* Largest permitted alignment is 256 bytes due to the way we
* handle the index determination for the smaller caches.
kmem_size = sizeof(struct kmem_cache);
#endif
-
printk(KERN_INFO
"SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d,"
" CPUs=%d, Nodes=%d\n",
*/
for_each_online_cpu(cpu)
get_cpu_slab(s, cpu)->objsize = s->objsize;
+
s->inuse = max_t(int, s->inuse, ALIGN(size, sizeof(void *)));
up_write(&slub_lock);
+
if (sysfs_slab_alias(s, name))
goto err;
return s;
}
+
s = kmalloc(kmem_size, GFP_KERNEL);
if (s) {
if (kmem_cache_open(s, GFP_KERNEL, name,
struct kmem_cache *s;
if (unlikely(size > PAGE_SIZE))
- return kmalloc_large(size, gfpflags);
+ return kmalloc_large_node(size, gfpflags, node);
s = get_slab(size, gfpflags);
unsigned long *map)
{
void *p;
- void *addr = slab_address(page);
+ void *addr = page_address(page);
if (!check_slab(s, page) ||
!on_freelist(s, page, NULL))
static void process_slab(struct loc_track *t, struct kmem_cache *s,
struct page *page, enum track_item alloc)
{
- void *addr = slab_address(page);
+ void *addr = page_address(page);
DECLARE_BITMAP(map, s->objects);
void *p;
#define SO_CPU (1 << SL_CPU)
#define SO_OBJECTS (1 << SL_OBJECTS)
-static unsigned long slab_objects(struct kmem_cache *s,
- char *buf, unsigned long flags)
+static ssize_t show_slab_objects(struct kmem_cache *s,
+ char *buf, unsigned long flags)
{
unsigned long total = 0;
int cpu;
unsigned long *per_cpu;
nodes = kzalloc(2 * sizeof(unsigned long) * nr_node_ids, GFP_KERNEL);
+ if (!nodes)
+ return -ENOMEM;
per_cpu = nodes + nr_node_ids;
for_each_possible_cpu(cpu) {
static ssize_t slabs_show(struct kmem_cache *s, char *buf)
{
- return slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU);
+ return show_slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU);
}
SLAB_ATTR_RO(slabs);
static ssize_t partial_show(struct kmem_cache *s, char *buf)
{
- return slab_objects(s, buf, SO_PARTIAL);
+ return show_slab_objects(s, buf, SO_PARTIAL);
}
SLAB_ATTR_RO(partial);
static ssize_t cpu_slabs_show(struct kmem_cache *s, char *buf)
{
- return slab_objects(s, buf, SO_CPU);
+ return show_slab_objects(s, buf, SO_CPU);
}
SLAB_ATTR_RO(cpu_slabs);
static ssize_t objects_show(struct kmem_cache *s, char *buf)
{
- return slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU|SO_OBJECTS);
+ return show_slab_objects(s, buf, SO_FULL|SO_PARTIAL|SO_CPU|SO_OBJECTS);
}
SLAB_ATTR_RO(objects);
#endif
#ifdef CONFIG_SLUB_STATS
-
static int show_stat(struct kmem_cache *s, char *buf, enum stat_item si)
{
unsigned long sum = 0;
#define ID_STR_LENGTH 64
/* Create a unique string id for a slab cache:
- * format
- * :[flags-]size:[memory address of kmemcache]
+ *
+ * Format :[flags-]size
*/
static char *create_unique_id(struct kmem_cache *s)
{
SetPageActive(page);
add_page_to_active_list(zone, page);
__count_vm_event(PGACTIVATE);
- mem_cgroup_move_lists(page_get_page_cgroup(page), true);
+ mem_cgroup_move_lists(page, true);
}
spin_unlock_irq(&zone->lru_lock);
}
}
/**
- * truncate_inode_pages - truncate range of pages specified by start and
- * end byte offsets
+ * truncate_inode_pages - truncate range of pages specified by start & end byte offsets
* @mapping: mapping to truncate
* @lstart: offset from which to truncate
* @lend: offset to which to truncate
static LIST_HEAD(shrinker_list);
static DECLARE_RWSEM(shrinker_rwsem);
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
#define scan_global_lru(sc) (!(sc)->mem_cgroup)
#else
#define scan_global_lru(sc) (1)
ClearPageActive(page);
list_move(&page->lru, &zone->inactive_list);
- mem_cgroup_move_lists(page_get_page_cgroup(page), false);
+ mem_cgroup_move_lists(page, false);
pgmoved++;
if (!pagevec_add(&pvec, page)) {
__mod_zone_page_state(zone, NR_INACTIVE, pgmoved);
VM_BUG_ON(PageLRU(page));
SetPageLRU(page);
VM_BUG_ON(!PageActive(page));
+
list_move(&page->lru, &zone->active_list);
- mem_cgroup_move_lists(page_get_page_cgroup(page), true);
+ mem_cgroup_move_lists(page, true);
pgmoved++;
if (!pagevec_add(&pvec, page)) {
__mod_zone_page_state(zone, NR_ACTIVE, pgmoved);
return do_try_to_free_pages(zones, gfp_mask, &sc);
}
-#ifdef CONFIG_CGROUP_MEM_CONT
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask)
l2cap_sock_kill(sk);
}
- del_timer_sync(&conn->info_timer);
+ if (conn->info_state & L2CAP_INFO_FEAT_MASK_REQ_SENT)
+ del_timer_sync(&conn->info_timer);
hcon->l2cap_data = NULL;
kfree(conn);
struct sk_buff *skb = skb_peek(&neigh->arp_queue);
/* keep skb alive even if arp_queue overflows */
if (skb)
- skb_get(skb);
+ skb = skb_copy(skb, GFP_ATOMIC);
write_unlock(&neigh->lock);
neigh->ops->solicit(neigh, skb);
atomic_inc(&neigh->probes);
static atomic_t trapped;
#define USEC_PER_POLL 50
+#define NETPOLL_RX_ENABLED 1
+#define NETPOLL_RX_DROP 2
#define MAX_SKB_SIZE \
(MAX_UDP_CHUNK + sizeof(struct udphdr) + \
if (!test_bit(NAPI_STATE_SCHED, &napi->state))
return budget;
+ npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
work = napi->poll(napi, budget);
atomic_dec(&trapped);
+ npinfo->rx_flags &= ~NETPOLL_RX_DROP;
return budget - work;
}
if (skb->dev->type != ARPHRD_ETHER)
goto out;
- /* if receive ARP during middle of NAPI poll, then queue */
+ /* check if netpoll clients need ARP */
if (skb->protocol == htons(ETH_P_ARP) &&
atomic_read(&trapped)) {
skb_queue_tail(&npi->arp_tx, skb);
return 1;
out:
- /* If packet received while already in poll then just
- * silently drop.
- */
if (atomic_read(&trapped)) {
kfree_skb(skb);
return 1;
goto release;
}
+ npinfo->rx_flags = 0;
npinfo->rx_np = NULL;
spin_lock_init(&npinfo->rx_lock);
if (np->rx_hook) {
spin_lock_irqsave(&npinfo->rx_lock, flags);
+ npinfo->rx_flags |= NETPOLL_RX_ENABLED;
npinfo->rx_np = np;
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
if (npinfo->rx_np == np) {
spin_lock_irqsave(&npinfo->rx_lock, flags);
npinfo->rx_np = NULL;
+ npinfo->rx_flags &= ~NETPOLL_RX_ENABLED;
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
tristate "IP: ESP transformation"
select XFRM
select CRYPTO
- select CRYPTO_AEAD
+ select CRYPTO_AUTHENC
select CRYPTO_HMAC
select CRYPTO_MD5
select CRYPTO_CBC
printk("Unknown ARP type 0x%04x for device %s\n", dev->type, dev->name);
b->htype = dev->type; /* can cause undefined behavior */
}
+
+ /* server_ip and your_ip address are both already zero per RFC2131 */
b->hlen = dev->addr_len;
- b->your_ip = NONE;
- b->server_ip = NONE;
memcpy(b->hw_addr, dev->dev_addr, dev->addr_len);
b->secs = htons(jiffies_diff / HZ);
b->xid = d->xid;
/*
* Binary Increase Congestion control for TCP
- *
+ * Home page:
+ * http://netsrv.csc.ncsu.edu/twiki/bin/view/Main/BIC
* This is from the implementation of BICTCP in
* Lison-Xu, Kahaled Harfoush, and Injong Rhee.
* "Binary Increase Congestion Control for Fast, Long Distance
* Networks" in InfoComm 2004
* Available from:
- * http://www.csc.ncsu.edu/faculty/rhee/export/bitcp.pdf
+ * http://netsrv.csc.ncsu.edu/export/bitcp.pdf
*
* Unless BIC is enabled and congestion window is large
* this behaves the same as the original Reno.
* a normal way
*/
static struct sk_buff *tcp_sacktag_skip(struct sk_buff *skb, struct sock *sk,
- u32 skip_to_seq)
+ u32 skip_to_seq, int *fack_count)
{
tcp_for_write_queue_from(skb, sk) {
if (skb == tcp_send_head(sk))
if (!before(TCP_SKB_CB(skb)->end_seq, skip_to_seq))
break;
+
+ *fack_count += tcp_skb_pcount(skb);
}
return skb;
}
return skb;
if (before(next_dup->start_seq, skip_to_seq)) {
- skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq);
+ skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count);
tcp_sacktag_walk(skb, sk, NULL,
next_dup->start_seq, next_dup->end_seq,
1, fack_count, reord, flag);
/* Head todo? */
if (before(start_seq, cache->start_seq)) {
- skb = tcp_sacktag_skip(skb, sk, start_seq);
+ skb = tcp_sacktag_skip(skb, sk, start_seq,
+ &fack_count);
skb = tcp_sacktag_walk(skb, sk, next_dup,
start_seq,
cache->start_seq,
goto walk;
}
- skb = tcp_sacktag_skip(skb, sk, cache->end_seq);
+ skb = tcp_sacktag_skip(skb, sk, cache->end_seq,
+ &fack_count);
/* Check overlap against next cached too (past this one already) */
cache++;
continue;
break;
fack_count = tp->fackets_out;
}
- skb = tcp_sacktag_skip(skb, sk, start_seq);
+ skb = tcp_sacktag_skip(skb, sk, start_seq, &fack_count);
walk:
skb = tcp_sacktag_walk(skb, sk, next_dup, start_seq, end_seq,
depends on IPV6
select XFRM
select CRYPTO
- select CRYPTO_AEAD
+ select CRYPTO_AUTHENC
select CRYPTO_HMAC
select CRYPTO_MD5
select CRYPTO_CBC
#ifdef CONFIG_PROC_FS
{ struct proc_dir_entry *ent;
- ent = create_proc_entry("ircomm", 0, proc_irda);
- if (ent)
- ent->proc_fops = &ircomm_proc_fops;
+ ent = proc_create("ircomm", 0, proc_irda, &ircomm_proc_fops);
+ if (!ent) {
+ printk(KERN_ERR "ircomm_init: can't create /proc entry!\n");
+ return -ENODEV;
+ }
}
#endif /* CONFIG_PROC_FS */
#ifdef CONFIG_PROC_FS
{ struct proc_dir_entry *proc;
- proc = create_proc_entry("irlan", 0, proc_irda);
+ proc = proc_create("irlan", 0, proc_irda, &irlan_fops);
if (!proc) {
printk(KERN_ERR "irlan_init: can't create /proc entry!\n");
return -ENODEV;
}
-
- proc->proc_fops = &irlan_fops;
}
#endif /* CONFIG_PROC_FS */
return;
proc_irda->owner = THIS_MODULE;
- for (i=0; i<ARRAY_SIZE(irda_dirs); i++) {
- d = create_proc_entry(irda_dirs[i].name, 0, proc_irda);
- if (d)
- d->proc_fops = irda_dirs[i].fops;
- }
+ for (i = 0; i < ARRAY_SIZE(irda_dirs); i++)
+ d = proc_create(irda_dirs[i].name, 0, proc_irda,
+ irda_dirs[i].fops);
}
/*
return iucv_call_b2f0(IUCV_SEVER, parm);
}
-#ifdef CONFIG_SMP
/**
* __iucv_cleanup_queue
* @dummy: unused dummy argument
static void __iucv_cleanup_queue(void *dummy)
{
}
-#endif
/**
* iucv_cleanup_queue
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
- * Copyright 2007, Stefano Brivio <stefano.brivio@polimi.it>
+ * Copyright 2007-2008, Stefano Brivio <stefano.brivio@polimi.it>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* RC_PID_ARITH_SHIFT.
*/
-
-/* Shift the adjustment so that we won't switch to a lower rate if it exhibited
- * a worse failed frames behaviour and we'll choose the highest rate whose
- * failed frames behaviour is not worse than the one of the original rate
- * target. While at it, check that the adjustment is within the ranges. Then,
- * provide the new rate index. */
-static int rate_control_pid_shift_adjust(struct rc_pid_rateinfo *r,
- int adj, int cur, int l)
-{
- int i, j, k, tmp;
-
- j = r[cur].rev_index;
- i = j + adj;
-
- if (i < 0)
- return r[0].index;
- if (i >= l - 1)
- return r[l - 1].index;
-
- tmp = i;
-
- if (adj < 0) {
- for (k = j; k >= i; k--)
- if (r[k].diff <= r[j].diff)
- tmp = k;
- } else {
- for (k = i + 1; k + i < l; k++)
- if (r[k].diff <= r[i].diff)
- tmp = k;
- }
-
- return r[tmp].index;
-}
-
+/* Adjust the rate while ensuring that we won't switch to a lower rate if it
+ * exhibited a worse failed frames behaviour and we'll choose the highest rate
+ * whose failed frames behaviour is not worse than the one of the original rate
+ * target. While at it, check that the new rate is valid. */
static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
struct sta_info *sta, int adj,
struct rc_pid_rateinfo *rinfo)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hw_mode *mode;
- int newidx;
- int maxrate;
- int back = (adj > 0) ? 1 : -1;
+ int cur_sorted, new_sorted, probe, tmp, n_bitrates;
+ int cur = sta->txrate;
sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev);
mode = local->oper_hw_mode;
- maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
+ n_bitrates = mode->num_rates;
- newidx = rate_control_pid_shift_adjust(rinfo, adj, sta->txrate,
- mode->num_rates);
+ /* Map passed arguments to sorted values. */
+ cur_sorted = rinfo[cur].rev_index;
+ new_sorted = cur_sorted + adj;
- while (newidx != sta->txrate) {
- if (rate_supported(sta, mode, newidx) &&
- (maxrate < 0 || newidx <= maxrate)) {
- sta->txrate = newidx;
- break;
- }
+ /* Check limits. */
+ if (new_sorted < 0)
+ new_sorted = rinfo[0].rev_index;
+ else if (new_sorted >= n_bitrates)
+ new_sorted = rinfo[n_bitrates - 1].rev_index;
- newidx += back;
+ tmp = new_sorted;
+
+ if (adj < 0) {
+ /* Ensure that the rate decrease isn't disadvantageous. */
+ for (probe = cur_sorted; probe >= new_sorted; probe--)
+ if (rinfo[probe].diff <= rinfo[cur_sorted].diff &&
+ rate_supported(sta, mode, rinfo[probe].index))
+ tmp = probe;
+ } else {
+ /* Look for rate increase with zero (or below) cost. */
+ for (probe = new_sorted + 1; probe < n_bitrates; probe++)
+ if (rinfo[probe].diff <= rinfo[new_sorted].diff &&
+ rate_supported(sta, mode, rinfo[probe].index))
+ tmp = probe;
}
+ /* Fit the rate found to the nearest supported rate. */
+ do {
+ if (rate_supported(sta, mode, rinfo[tmp].index)) {
+ sta->txrate = rinfo[tmp].index;
+ break;
+ }
+ if (adj < 0)
+ tmp--;
+ else
+ tmp++;
+ } while (tmp < n_bitrates && tmp >= 0);
+
#ifdef CONFIG_MAC80211_DEBUGFS
rate_control_pid_event_rate_change(
&((struct rc_pid_sta_info *)sta->rate_ctrl_priv)->events,
- newidx, mode->rates[newidx].rate);
+ cur, mode->rates[cur].rate);
#endif
}
{
struct proc_dir_entry *p;
- p = create_proc_entry("eps", S_IRUGO, proc_net_sctp);
+ p = proc_create("eps", S_IRUGO, proc_net_sctp, &sctp_eps_seq_fops);
if (!p)
return -ENOMEM;
- p->proc_fops = &sctp_eps_seq_fops;
-
return 0;
}
{
struct proc_dir_entry *p;
- p = create_proc_entry("assocs", S_IRUGO, proc_net_sctp);
+ p = proc_create("assocs", S_IRUGO, proc_net_sctp,
+ &sctp_assocs_seq_fops);
if (!p)
return -ENOMEM;
- p->proc_fops = &sctp_assocs_seq_fops;
-
return 0;
}
If in doubt, say "N" here.
+config SAMPLE_KPROBES
+ tristate "Build kprobes examples -- loadable modules only"
+ depends on KPROBES && m
+ help
+ This build several kprobes example modules.
+
+config SAMPLE_KRETPROBES
+ tristate "Build kretprobes example -- loadable modules only"
+ default m
+ depends on SAMPLE_KPROBES && KRETPROBES
+
endif # SAMPLES
# Makefile for Linux samples code
-obj-$(CONFIG_SAMPLES) += markers/ kobject/
+obj-$(CONFIG_SAMPLES) += markers/ kobject/ kprobes/
--- /dev/null
+# builds the kprobes example kernel modules;
+# then to use one (as root): insmod <module_name.ko>
+
+obj-$(CONFIG_SAMPLE_KPROBES) += kprobe_example.o jprobe_example.o
+obj-$(CONFIG_SAMPLE_KRETPROBES) += kretprobe_example.o
--- /dev/null
+/*
+ * Here's a sample kernel module showing the use of jprobes to dump
+ * the arguments of do_fork().
+ *
+ * For more information on theory of operation of jprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the
+ * console whenever do_fork() is invoked to create a new process.
+ * (Some messages may be suppressed if syslogd is configured to
+ * eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/*
+ * Jumper probe for do_fork.
+ * Mirror principle enables access to arguments of the probed routine
+ * from the probe handler.
+ */
+
+/* Proxy routine having the same arguments as actual do_fork() routine */
+static long jdo_fork(unsigned long clone_flags, unsigned long stack_start,
+ struct pt_regs *regs, unsigned long stack_size,
+ int __user *parent_tidptr, int __user *child_tidptr)
+{
+ printk(KERN_INFO "jprobe: clone_flags = 0x%lx, stack_size = 0x%lx,"
+ " regs = 0x%p\n",
+ clone_flags, stack_size, regs);
+
+ /* Always end with a call to jprobe_return(). */
+ jprobe_return();
+ return 0;
+}
+
+static struct jprobe my_jprobe = {
+ .entry = jdo_fork,
+ .kp = {
+ .symbol_name = "do_fork",
+ },
+};
+
+static int __init jprobe_init(void)
+{
+ int ret;
+
+ ret = register_jprobe(&my_jprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_jprobe failed, returned %d\n", ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted jprobe at %p, handler addr %p\n",
+ my_jprobe.kp.addr, my_jprobe.entry);
+ return 0;
+}
+
+static void __exit jprobe_exit(void)
+{
+ unregister_jprobe(&my_jprobe);
+ printk(KERN_INFO "jprobe at %p unregistered\n", my_jprobe.kp.addr);
+}
+
+module_init(jprobe_init)
+module_exit(jprobe_exit)
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * NOTE: This example is works on x86 and powerpc.
+ * Here's a sample kernel module showing the use of kprobes to dump a
+ * stack trace and selected registers when do_fork() is called.
+ *
+ * For more information on theory of operation of kprobes, see
+ * Documentation/kprobes.txt
+ *
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever do_fork() is invoked to create a new process.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+
+/* For each probe you need to allocate a kprobe structure */
+static struct kprobe kp = {
+ .symbol_name = "do_fork",
+};
+
+/* kprobe pre_handler: called just before the probed instruction is executed */
+static int handler_pre(struct kprobe *p, struct pt_regs *regs)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, ip = %lx,"
+ " flags = 0x%lx\n",
+ p->addr, regs->ip, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "pre_handler: p->addr = 0x%p, nip = 0x%lx,"
+ " msr = 0x%lx\n",
+ p->addr, regs->nip, regs->msr);
+#endif
+
+ /* A dump_stack() here will give a stack backtrace */
+ return 0;
+}
+
+/* kprobe post_handler: called after the probed instruction is executed */
+static void handler_post(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+#ifdef CONFIG_X86
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, flags = 0x%lx\n",
+ p->addr, regs->flags);
+#endif
+#ifdef CONFIG_PPC
+ printk(KERN_INFO "post_handler: p->addr = 0x%p, msr = 0x%lx\n",
+ p->addr, regs->msr);
+#endif
+}
+
+/*
+ * fault_handler: this is called if an exception is generated for any
+ * instruction within the pre- or post-handler, or when Kprobes
+ * single-steps the probed instruction.
+ */
+static int handler_fault(struct kprobe *p, struct pt_regs *regs, int trapnr)
+{
+ printk(KERN_INFO "fault_handler: p->addr = 0x%p, trap #%dn",
+ p->addr, trapnr);
+ /* Return 0 because we don't handle the fault. */
+ return 0;
+}
+
+static int __init kprobe_init(void)
+{
+ int ret;
+ kp.pre_handler = handler_pre;
+ kp.post_handler = handler_post;
+ kp.fault_handler = handler_fault;
+
+ ret = register_kprobe(&kp);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kprobe failed, returned %d\n", ret);
+ return ret;
+ }
+ printk(KERN_INFO "Planted kprobe at %p\n", kp.addr);
+ return 0;
+}
+
+static void __exit kprobe_exit(void)
+{
+ unregister_kprobe(&kp);
+ printk(KERN_INFO "kprobe at %p unregistered\n", kp.addr);
+}
+
+module_init(kprobe_init)
+module_exit(kprobe_exit)
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * kretprobe_example.c
+ *
+ * Here's a sample kernel module showing the use of return probes to
+ * report the return value and total time taken for probed function
+ * to run.
+ *
+ * usage: insmod kretprobe_example.ko func=<func_name>
+ *
+ * If no func_name is specified, do_fork is instrumented
+ *
+ * For more information on theory of operation of kretprobes, see
+ * Documentation/kprobes.txt
+ *
+ * Build and insert the kernel module as done in the kprobe example.
+ * You will see the trace data in /var/log/messages and on the console
+ * whenever the probed function returns. (Some messages may be suppressed
+ * if syslogd is configured to eliminate duplicate messages.)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/ktime.h>
+#include <linux/limits.h>
+
+static char func_name[NAME_MAX] = "do_fork";
+module_param_string(func, func_name, NAME_MAX, S_IRUGO);
+MODULE_PARM_DESC(func, "Function to kretprobe; this module will report the"
+ " function's execution time");
+
+/* per-instance private data */
+struct my_data {
+ ktime_t entry_stamp;
+};
+
+/* Here we use the entry_hanlder to timestamp function entry */
+static int entry_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ struct my_data *data;
+
+ if (!current->mm)
+ return 1; /* Skip kernel threads */
+
+ data = (struct my_data *)ri->data;
+ data->entry_stamp = ktime_get();
+ return 0;
+}
+
+/*
+ * Return-probe handler: Log the return value and duration. Duration may turn
+ * out to be zero consistently, depending upon the granularity of time
+ * accounting on the platform.
+ */
+static int ret_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ int retval = regs_return_value(regs);
+ struct my_data *data = (struct my_data *)ri->data;
+ s64 delta;
+ ktime_t now;
+
+ now = ktime_get();
+ delta = ktime_to_ns(ktime_sub(now, data->entry_stamp));
+ printk(KERN_INFO "%s returned %d and took %lld ns to execute\n",
+ func_name, retval, (long long)delta);
+ return 0;
+}
+
+static struct kretprobe my_kretprobe = {
+ .handler = ret_handler,
+ .entry_handler = entry_handler,
+ .data_size = sizeof(struct my_data),
+ /* Probe up to 20 instances concurrently. */
+ .maxactive = 20,
+};
+
+static int __init kretprobe_init(void)
+{
+ int ret;
+
+ my_kretprobe.kp.symbol_name = func_name;
+ ret = register_kretprobe(&my_kretprobe);
+ if (ret < 0) {
+ printk(KERN_INFO "register_kretprobe failed, returned %d\n",
+ ret);
+ return -1;
+ }
+ printk(KERN_INFO "Planted return probe at %s: %p\n",
+ my_kretprobe.kp.symbol_name, my_kretprobe.kp.addr);
+ return 0;
+}
+
+static void __exit kretprobe_exit(void)
+{
+ unregister_kretprobe(&my_kretprobe);
+ printk(KERN_INFO "kretprobe at %p unregistered\n",
+ my_kretprobe.kp.addr);
+
+ /* nmissed > 0 suggests that maxactive was set too low. */
+ printk(KERN_INFO "Missed probing %d instances of %s\n",
+ my_kretprobe.nmissed, my_kretprobe.kp.symbol_name);
+}
+
+module_init(kretprobe_init)
+module_exit(kretprobe_exit)
+MODULE_LICENSE("GPL");
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.14';
+my $V = '0.15';
use Getopt::Long qw(:config no_auto_abbrev);
__iomem|
__must_check|
__init_refok|
- __kprobes|
- fastcall
+ __kprobes
}x;
our $Attribute = qr{
const|
\b
(?:const\s+)?
(?:unsigned\s+)?
- $all
+ (?:
+ $all|
+ (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+ )
(?:\s+$Sparse|\s+const)*
\b
}x;
my $type = '';
my $level = 0;
+ my $p;
my $c;
my $len = 0;
last;
}
}
+ $p = $c;
$c = substr($blk, $off, 1);
$remainder = substr($blk, $off);
}
# An else is really a conditional as long as its not else if
- if ($level == 0 && $remainder =~ /(\s+else)(?:\s|{)/ &&
- $remainder !~ /\s+else\s+if\b/) {
+ if ($level == 0 && (!defined($p) || $p =~ /(?:\s|\})/) &&
+ $remainder =~ /(else)(?:\s|{)/ &&
+ $remainder !~ /else\s+if\b/) {
$coff = $off + length($1);
}
$line, $remain + 1, $off - $loff + 1, $level);
}
+sub statement_lines {
+ my ($stmt) = @_;
+
+ # Strip the diff line prefixes and rip blank lines at start and end.
+ $stmt =~ s/(^|\n)./$1/g;
+ $stmt =~ s/^\s*//;
+ $stmt =~ s/\s*$//;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+
+ return $#stmt_lines + 2;
+}
+
+sub statement_rawlines {
+ my ($stmt) = @_;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+
+ return $#stmt_lines + 2;
+}
+
+sub statement_block_size {
+ my ($stmt) = @_;
+
+ $stmt =~ s/(^|\n)./$1/g;
+ $stmt =~ s/^\s*{//;
+ $stmt =~ s/}\s*$//;
+ $stmt =~ s/^\s*//;
+ $stmt =~ s/\s*$//;
+
+ my @stmt_lines = ($stmt =~ /\n/g);
+ my @stmt_statements = ($stmt =~ /;/g);
+
+ my $stmt_lines = $#stmt_lines + 2;
+ my $stmt_statements = $#stmt_statements + 1;
+
+ if ($stmt_lines > $stmt_statements) {
+ return $stmt_lines;
+ } else {
+ return $stmt_statements;
+ }
+}
+
sub ctx_statement_full {
my ($linenr, $remain, $off) = @_;
my ($statement, $condition, $level);
my (@chunks);
+ # Grab the first conditional/block pair.
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "F: c<$condition> s<$statement>\n";
+ push(@chunks, [ $condition, $statement ]);
+ if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
+ return ($level, $linenr, @chunks);
+ }
+
+ # Pull in the following conditional/block pairs and see if they
+ # could continue the statement.
for (;;) {
- push(@chunks, [ $condition, $statement ]);
- last if (!($remain > 0 && $condition =~ /^.\s*(?:if|else|do)/));
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
- #print "C: c<$condition> s<$statement>\n";
+ #print "C: c<$condition> s<$statement> remain<$remain>\n";
+ last if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:else|do)\b/s));
+ #print "C: push\n";
+ push(@chunks, [ $condition, $statement ]);
}
return ($level, $linenr, @chunks);
}
my $av_preprocessor = 0;
-my $av_paren = 0;
+my $av_pending;
my @av_paren_type;
sub annotate_reset {
$av_preprocessor = 0;
- $av_paren = 0;
- @av_paren_type = ();
+ $av_pending = '_';
+ @av_paren_type = ('E');
}
sub annotate_values {
print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
- print " <$type> " if ($dbg_values > 1);
+ print " <" . join('', @av_paren_type) .
+ "> <$type> " if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
print "WS($1)\n" if ($dbg_values > 1);
if ($1 =~ /\n/ && $av_preprocessor) {
+ $type = pop(@av_paren_type);
$av_preprocessor = 0;
- $type = 'N';
}
} elsif ($cur =~ /^($Type)/) {
} elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
- $av_paren_type[$av_paren] = 'N';
+ $av_pending = 'N';
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if|else|elif|endif))/o) {
- print "PRE($1)\n" if ($dbg_values > 1);
+ } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+ print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
+
+ push(@av_paren_type, $type);
+ push(@av_paren_type, $type);
+ $type = 'N';
+
+ } elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+ print "PRE_RESTART($1)\n" if ($dbg_values > 1);
+ $av_preprocessor = 1;
+
+ push(@av_paren_type, $av_paren_type[$#av_paren_type]);
+
+ $type = 'N';
+
+ } elsif ($cur =~ /^(#\s*(?:endif))/o) {
+ print "PRE_END($1)\n" if ($dbg_values > 1);
+
+ $av_preprocessor = 1;
+
+ # Assume all arms of the conditional end as this
+ # one does, and continue as if the #endif was not here.
+ pop(@av_paren_type);
+ push(@av_paren_type, $type);
$type = 'N';
} elsif ($cur =~ /^(\\\n)/o) {
} elsif ($cur =~ /^(sizeof)\s*(\()?/o) {
print "SIZEOF($1)\n" if ($dbg_values > 1);
if (defined $2) {
- $av_paren_type[$av_paren] = 'V';
+ $av_pending = 'V';
}
$type = 'N';
} elsif ($cur =~ /^(if|while|typeof|__typeof__|for)\b/o) {
print "COND($1)\n" if ($dbg_values > 1);
- $av_paren_type[$av_paren] = 'N';
+ $av_pending = 'N';
$type = 'N';
} elsif ($cur =~/^(return|case|else)/o) {
} elsif ($cur =~ /^(\()/o) {
print "PAREN('$1')\n" if ($dbg_values > 1);
- $av_paren++;
+ push(@av_paren_type, $av_pending);
+ $av_pending = '_';
$type = 'N';
} elsif ($cur =~ /^(\))/o) {
- $av_paren-- if ($av_paren > 0);
- if (defined $av_paren_type[$av_paren]) {
- $type = $av_paren_type[$av_paren];
- undef $av_paren_type[$av_paren];
+ my $new_type = pop(@av_paren_type);
+ if ($new_type ne '_') {
+ $type = $new_type;
print "PAREN('$1') -> $type\n"
if ($dbg_values > 1);
} else {
} elsif ($cur =~ /^($Ident)\(/o) {
print "FUNC($1)\n" if ($dbg_values > 1);
- $av_paren_type[$av_paren] = 'V';
+ $av_pending = 'V';
} elsif ($cur =~ /^($Ident|$Constant)/o) {
print "IDENT($1)\n" if ($dbg_values > 1);
print "ASSIGN($1)\n" if ($dbg_values > 1);
$type = 'N';
- } elsif ($cur =~/^(;)/) {
+ } elsif ($cur =~/^(;|{|})/) {
print "END($1)\n" if ($dbg_values > 1);
$type = 'E';
- } elsif ($cur =~ /^(;|{|}|\?|:|\[)/o) {
+ } elsif ($cur =~ /^(;|\?|:|\[)/o) {
print "CLOSE($1)\n" if ($dbg_values > 1);
$type = 'N';
}
# check for RCS/CVS revision markers
- if ($rawline =~ /\$(Revision|Log|Id)(?:\$|)/) {
+ if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) {
WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
}
# Check for potential 'bare' types
if ($realcnt) {
+ my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
+ $s =~ s/\n./ /g;
+ $s =~ s/{.*$//;
+
# Ignore goto labels.
- if ($line =~ /$Ident:\*$/) {
+ if ($s =~ /$Ident:\*$/) {
# Ignore functions being called
- } elsif ($line =~ /^.\s*$Ident\s*\(/) {
+ } elsif ($s =~ /^.\s*$Ident\s*\(/) {
# definitions in global scope can only start with types
- } elsif ($line =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
- possible($1, $line);
+ } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/) {
+ possible($1, $s);
# declarations always start with types
- } elsif ($prev_values eq 'E' && $line =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/) {
- possible($1);
+ } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/) {
+ possible($1, $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
- while ($line =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/g) {
- possible($1, $line);
+ while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/g) {
+ possible($1, $s);
}
# Check for any sort of function declaration.
# int foo(something bar, other baz);
# void (*store_gdt)(x86_descr_ptr *);
- if ($prev_values eq 'E' && $line =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
+ if ($prev_values eq 'E' && $s =~ /^(.(?:typedef\s*)?(?:(?:$Storage|$Inline)\s*)*\s*$Type\s*(?:\b$Ident|\(\*\s*$Ident\))\s*)\(/) {
my ($name_len) = length($1);
- my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, $name_len);
- my $ctx = join("\n", @ctx);
- $ctx =~ s/\n.//;
+ my $ctx = $s;
substr($ctx, 0, $name_len + 1) = '';
$ctx =~ s/\)[^\)]*$//;
+
for my $arg (split(/\s*,\s*/, $ctx)) {
if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
- possible($1, $line);
+ possible($1, $s);
}
}
}
$curr_values = $prev_values . $curr_values;
if ($dbg_values) {
my $outline = $opline; $outline =~ s/\t/ /g;
- warn "--> .$outline\n";
- warn "--> $curr_values\n";
+ print "$linenr > .$outline\n";
+ print "$linenr > $curr_values\n";
}
$prev_values = substr($curr_values, -1);
if (($prevline !~ /^}/) &&
($prevline !~ /^\+}/) &&
($prevline !~ /^ }/) &&
- ($prevline !~ /\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=)/)) {
+ ($prevline !~ /^.DECLARE_$Ident\(\Q$name\E\)/) &&
+ ($prevline !~ /^.LIST_HEAD\(\Q$name\E\)/) &&
+ ($prevline !~ /\b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)/)) {
WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
}
}
=>|->|<<|>>|<|>|=|!|~|
&&|\|\||,|\^|\+\+|--|&|\||\+|-|\*|\/|%
}x;
- my @elements = split(/($;+|$ops|;)/, $opline);
+ my @elements = split(/($ops|;)/, $opline);
my $off = 0;
my $blank = copy_spacing($opline);
my $a = '';
$a = 'V' if ($elements[$n] ne '');
$a = 'W' if ($elements[$n] =~ /\s$/);
+ $a = 'C' if ($elements[$n] =~ /$;$/);
$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
$a = 'O' if ($elements[$n] eq '');
$a = 'E' if ($elements[$n] eq '' && $n == 0);
if (defined $elements[$n + 2]) {
$c = 'V' if ($elements[$n + 2] ne '');
$c = 'W' if ($elements[$n + 2] =~ /^\s/);
+ $c = 'C' if ($elements[$n + 2] =~ /^$;/);
$c = 'B' if ($elements[$n + 2] =~ /^(\)|\]|;)/);
$c = 'O' if ($elements[$n + 2] eq '');
$c = 'E' if ($elements[$n + 2] =~ /\s*\\$/);
if ($op_type ne 'V' &&
$ca =~ /\s$/ && $cc =~ /^\s*,/) {
- # Ignore comments
- } elsif ($op =~ /^$;+$/) {
+# # Ignore comments
+# } elsif ($op =~ /^$;+$/) {
# ; should have either the end of line or a space or \ after it
} elsif ($op eq ';') {
- if ($ctx !~ /.x[WEB]/ && $cc !~ /^\\/ &&
- $cc !~ /^;/) {
+ if ($ctx !~ /.x[WEBC]/ &&
+ $cc !~ /^\\/ && $cc !~ /^;/) {
ERROR("need space after that '$op' $at\n" . $hereptr);
}
# , must have a space on the right.
} elsif ($op eq ',') {
- if ($ctx !~ /.xW|.xE/ && $cc !~ /^}/) {
+ if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
ERROR("need space after that '$op' $at\n" . $hereptr);
}
# unary operator, or a cast
} elsif ($op eq '!' || $op eq '~' ||
($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
- if ($ctx !~ /[WEB]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
+ if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
ERROR("need space before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /.xW/) {
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
- if ($ctx !~ /[WOB]x[^W]/ && $ctx !~ /[^W]x[WOBE]/) {
+ if ($ctx !~ /[WOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
ERROR("need space one side of that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
$op eq '*' or $op eq '/' or
$op eq '%')
{
- if ($ctx !~ /VxV|WxW|VxE|WxE|VxO/) {
+ if ($ctx !~ /VxV|WxW|VxE|WxE|VxO|Cx.|.xC/) {
ERROR("need consistent spacing around '$op' $at\n" .
$hereptr);
}
# All the others need spaces both sides.
- } elsif ($ctx !~ /[EW]x[WE]/) {
+ } elsif ($ctx !~ /[EWC]x[CWE]/) {
# Ignore email addresses <foo@bar>
if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
!($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
-# in a known goot container
+# in a known good container
if ($prevline =~ /\#define.*\\/ &&
$prevline !~/(?:do\s+{|\(\{|\{)/ &&
$line !~ /(?:do\s+{|\(\{|\{)/ &&
# check for redundant bracing round if etc
if ($line =~ /(^.*)\bif\b/ && $1 !~ /else\s*$/) {
my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, 0);
+ ctx_statement_full($linenr, $realcnt, 1);
#print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n";
- if ($#chunks > 1 && $level == 0) {
+ #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n";
+ if ($#chunks > 0 && $level == 0) {
my $allowed = 0;
my $seen = 0;
+ my $herectx = $here . "\n";;
+ my $ln = $linenr - 1;
for my $chunk (@chunks) {
my ($cond, $block) = @{$chunk};
+ $herectx .= "$rawlines[$ln]\n[...]\n";
+ $ln += statement_rawlines($block) - 1;
+
substr($block, 0, length($cond)) = '';
$seen++ if ($block =~ /^\s*{/);
- $block =~ s/(^|\n)./$1/g;
- $block =~ s/^\s*{//;
- $block =~ s/}\s*$//;
- $block =~ s/^\s*//;
- $block =~ s/\s*$//;
-
- my @lines = ($block =~ /\n/g);
- my @statements = ($block =~ /;/g);
-
- #print "cond<$cond> block<$block> lines<" . scalar(@lines) . "> statements<" . scalar(@statements) . "> seen<$seen> allowed<$allowed>\n";
- if (scalar(@lines) != 0) {
+ #print "cond<$cond> block<$block> allowed<$allowed>\n";
+ if (statement_lines($cond) > 1) {
+ #print "APW: ALLOWED: cond<$cond>\n";
$allowed = 1;
}
if ($block =~/\b(?:if|for|while)\b/) {
+ #print "APW: ALLOWED: block<$block>\n";
$allowed = 1;
}
- if (scalar(@statements) > 1) {
+ if (statement_block_size($block) > 1) {
+ #print "APW: ALLOWED: lines block<$block>\n";
$allowed = 1;
}
}
if ($seen && !$allowed) {
- WARN("braces {} are not necessary for any arm of this statement\n" . $herecurr);
- $suppress_ifbraces = $endln;
+ WARN("braces {} are not necessary for any arm of this statement\n" . $herectx);
}
+ # Either way we have looked over this whole
+ # statement and said what needs to be said.
+ $suppress_ifbraces = $endln;
}
}
if ($linenr > $suppress_ifbraces &&
$line =~ /\b(if|while|for|else)\b/) {
- # Locate the end of the opening statement.
- my @control = ctx_statement($linenr, $realcnt, 0);
- my $nr = $linenr + (scalar(@control) - 1);
- my $cnt = $realcnt - (scalar(@control) - 1);
-
- my $off = $realcnt - $cnt;
- #print "$off: line<$line>end<" . $lines[$nr - 1] . ">\n";
-
- # If this is is a braced statement group check it
- if ($lines[$nr - 1] =~ /{\s*$/) {
- my ($lvl, @block) = ctx_block_level($nr, $cnt);
-
- my $stmt = join("\n", @block);
- # Drop the diff line leader.
- $stmt =~ s/\n./\n/g;
- # Drop the code outside the block.
- $stmt =~ s/(^[^{]*){\s*//;
- my $before = $1;
- $stmt =~ s/\s*}([^}]*$)//;
- my $after = $1;
-
- #print "block<" . join(' ', @block) . "><" . scalar(@block) . ">\n";
- #print "before<$before> stmt<$stmt> after<$after>\n\n";
-
- # Count the newlines, if there is only one
- # then the block should not have {}'s.
- my @lines = ($stmt =~ /\n/g);
- my @statements = ($stmt =~ /;/g);
- #print "lines<" . scalar(@lines) . ">\n";
- #print "statements<" . scalar(@statements) . ">\n";
- if ($lvl == 0 && scalar(@lines) == 0 &&
- scalar(@statements) < 2 &&
- $stmt !~ /{/ && $stmt !~ /\bif\b/ &&
- $before !~ /}/ && $after !~ /{/) {
- my $herectx = "$here\n" . join("\n", @control, @block[1 .. $#block]) . "\n";
- shift(@block);
- WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
+ my ($level, $endln, @chunks) =
+ ctx_statement_full($linenr, $realcnt, $-[0]);
+
+ my $allowed = 0;
+
+ # Check the pre-context.
+ if (substr($line, 0, $-[0]) =~ /(\}\s*)$/) {
+ #print "APW: ALLOWED: pre<$1>\n";
+ $allowed = 1;
+ }
+ # Check the condition.
+ my ($cond, $block) = @{$chunks[0]};
+ if (defined $cond) {
+ substr($block, 0, length($cond)) = '';
+ }
+ if (statement_lines($cond) > 1) {
+ #print "APW: ALLOWED: cond<$cond>\n";
+ $allowed = 1;
+ }
+ if ($block =~/\b(?:if|for|while)\b/) {
+ #print "APW: ALLOWED: block<$block>\n";
+ $allowed = 1;
+ }
+ if (statement_block_size($block) > 1) {
+ #print "APW: ALLOWED: lines block<$block>\n";
+ $allowed = 1;
+ }
+ # Check the post-context.
+ if (defined $chunks[1]) {
+ my ($cond, $block) = @{$chunks[1]};
+ if (defined $cond) {
+ substr($block, 0, length($cond)) = '';
+ }
+ if ($block =~ /^\s*\{/) {
+ #print "APW: ALLOWED: chunk-1 block<$block>\n";
+ $allowed = 1;
+ }
+ }
+ if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
+ my $herectx = $here . "\n";;
+ my $end = $linenr + statement_rawlines($block) - 1;
+
+ for (my $ln = $linenr - 1; $ln < $end; $ln++) {
+ $herectx .= $rawlines[$ln] . "\n";;
}
+
+ WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
}
}
print "are false positives report them to the maintainer, see\n";
print "CHECKPATCH in MAINTAINERS.\n";
}
- print <<EOL if ($file == 1 && $quiet == 0);
-
-WARNING: Using --file mode. Please do not send patches to linux-kernel
-that change whole existing files if you did not significantly change most
-of the the file for other reasons anyways or just wrote the file newly
-from scratch. Pure code style patches have a significant cost in a
-quickly changing code base like Linux because they cause rejects
-with other changes.
-EOL
return $clean;
}
return;
}
-static int dummy_sb_copy_data (struct file_system_type *type,
- void *orig, void *copy)
+static int dummy_sb_copy_data (char *orig, char *copy)
{
return 0;
}
return;
}
-static int dummy_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options,
- int **flags, int *num_opts)
+static int dummy_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts)
{
- *mount_options = NULL;
- *flags = NULL;
- *num_opts = 0;
+ security_init_mnt_opts(opts);
return 0;
}
-static int dummy_sb_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts)
+static int dummy_sb_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
{
- if (unlikely(num_opts))
+ if (unlikely(opts->num_mnt_opts))
return -EOPNOTSUPP;
return 0;
}
return;
}
+static int dummy_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return 0;
+}
+
static int dummy_inode_alloc_security (struct inode *inode)
{
return 0;
set_to_dummy_if_null(ops, sb_get_mnt_opts);
set_to_dummy_if_null(ops, sb_set_mnt_opts);
set_to_dummy_if_null(ops, sb_clone_mnt_opts);
+ set_to_dummy_if_null(ops, sb_parse_opts_str);
set_to_dummy_if_null(ops, inode_alloc_security);
set_to_dummy_if_null(ops, inode_free_security);
set_to_dummy_if_null(ops, inode_init_security);
security_ops->sb_free_security(sb);
}
-int security_sb_copy_data(struct file_system_type *type, void *orig, void *copy)
+int security_sb_copy_data(char *orig, char *copy)
{
- return security_ops->sb_copy_data(type, orig, copy);
+ return security_ops->sb_copy_data(orig, copy);
}
+EXPORT_SYMBOL(security_sb_copy_data);
int security_sb_kern_mount(struct super_block *sb, void *data)
{
}
int security_sb_get_mnt_opts(const struct super_block *sb,
- char ***mount_options,
- int **flags, int *num_opts)
+ struct security_mnt_opts *opts)
{
- return security_ops->sb_get_mnt_opts(sb, mount_options, flags, num_opts);
+ return security_ops->sb_get_mnt_opts(sb, opts);
}
int security_sb_set_mnt_opts(struct super_block *sb,
- char **mount_options,
- int *flags, int num_opts)
+ struct security_mnt_opts *opts)
{
- return security_ops->sb_set_mnt_opts(sb, mount_options, flags, num_opts);
+ return security_ops->sb_set_mnt_opts(sb, opts);
}
+EXPORT_SYMBOL(security_sb_set_mnt_opts);
void security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb)
{
security_ops->sb_clone_mnt_opts(oldsb, newsb);
}
+EXPORT_SYMBOL(security_sb_clone_mnt_opts);
+
+int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return security_ops->sb_parse_opts_str(options, opts);
+}
+EXPORT_SYMBOL(security_sb_parse_opts_str);
int security_inode_alloc(struct inode *inode)
{
* mount options, or whatever.
*/
static int selinux_get_mnt_opts(const struct super_block *sb,
- char ***mount_options, int **mnt_opts_flags,
- int *num_opts)
+ struct security_mnt_opts *opts)
{
int rc = 0, i;
struct superblock_security_struct *sbsec = sb->s_security;
u32 len;
char tmp;
- *num_opts = 0;
- *mount_options = NULL;
- *mnt_opts_flags = NULL;
+ security_init_mnt_opts(opts);
if (!sbsec->initialized)
return -EINVAL;
/* count the number of mount options for this sb */
for (i = 0; i < 8; i++) {
if (tmp & 0x01)
- (*num_opts)++;
+ opts->num_mnt_opts++;
tmp >>= 1;
}
- *mount_options = kcalloc(*num_opts, sizeof(char *), GFP_ATOMIC);
- if (!*mount_options) {
+ opts->mnt_opts = kcalloc(opts->num_mnt_opts, sizeof(char *), GFP_ATOMIC);
+ if (!opts->mnt_opts) {
rc = -ENOMEM;
goto out_free;
}
- *mnt_opts_flags = kcalloc(*num_opts, sizeof(int), GFP_ATOMIC);
- if (!*mnt_opts_flags) {
+ opts->mnt_opts_flags = kcalloc(opts->num_mnt_opts, sizeof(int), GFP_ATOMIC);
+ if (!opts->mnt_opts_flags) {
rc = -ENOMEM;
goto out_free;
}
rc = security_sid_to_context(sbsec->sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = FSCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = FSCONTEXT_MNT;
}
if (sbsec->flags & CONTEXT_MNT) {
rc = security_sid_to_context(sbsec->mntpoint_sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = CONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = CONTEXT_MNT;
}
if (sbsec->flags & DEFCONTEXT_MNT) {
rc = security_sid_to_context(sbsec->def_sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = DEFCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = DEFCONTEXT_MNT;
}
if (sbsec->flags & ROOTCONTEXT_MNT) {
struct inode *root = sbsec->sb->s_root->d_inode;
rc = security_sid_to_context(isec->sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = ROOTCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = ROOTCONTEXT_MNT;
}
- BUG_ON(i != *num_opts);
+ BUG_ON(i != opts->num_mnt_opts);
return 0;
out_free:
- /* don't leak context string if security_sid_to_context had an error */
- if (*mount_options && i)
- for (; i > 0; i--)
- kfree((*mount_options)[i-1]);
- kfree(*mount_options);
- *mount_options = NULL;
- kfree(*mnt_opts_flags);
- *mnt_opts_flags = NULL;
- *num_opts = 0;
+ security_free_mnt_opts(opts);
return rc;
}
return 1;
return 0;
}
+
/*
* Allow filesystems with binary mount data to explicitly set mount point
* labeling information.
*/
-static int selinux_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts)
+static int selinux_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
{
int rc = 0, i;
struct task_security_struct *tsec = current->security;
struct inode_security_struct *root_isec = inode->i_security;
u32 fscontext_sid = 0, context_sid = 0, rootcontext_sid = 0;
u32 defcontext_sid = 0;
+ char **mount_options = opts->mnt_opts;
+ int *flags = opts->mnt_opts_flags;
+ int num_opts = opts->num_mnt_opts;
mutex_lock(&sbsec->lock);
goto out;
}
+ /*
+ * Binary mount data FS will come through this function twice. Once
+ * from an explicit call and once from the generic calls from the vfs.
+ * Since the generic VFS calls will not contain any security mount data
+ * we need to skip the double mount verification.
+ *
+ * This does open a hole in which we will not notice if the first
+ * mount using this sb set explict options and a second mount using
+ * this sb does not set any security options. (The first options
+ * will be used for both mounts)
+ */
+ if (sbsec->initialized && (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA)
+ && (num_opts == 0))
+ goto out;
+
/*
* parse the mount options, check if they are valid sids.
* also check if someone is trying to mount the same sb more
mutex_unlock(&newsbsec->lock);
}
-/*
- * string mount options parsing and call set the sbsec
- */
-static int superblock_doinit(struct super_block *sb, void *data)
+int selinux_parse_opts_str(char *options, struct security_mnt_opts *opts)
{
+ char *p;
char *context = NULL, *defcontext = NULL;
char *fscontext = NULL, *rootcontext = NULL;
- int rc = 0;
- char *p, *options = data;
- /* selinux only know about a fixed number of mount options */
- char *mnt_opts[NUM_SEL_MNT_OPTS];
- int mnt_opts_flags[NUM_SEL_MNT_OPTS], num_mnt_opts = 0;
-
- if (!data)
- goto out;
+ int rc, num_mnt_opts = 0;
- /* with the nfs patch this will become a goto out; */
- if (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) {
- const char *name = sb->s_type->name;
- /* NFS we understand. */
- if (!strcmp(name, "nfs")) {
- struct nfs_mount_data *d = data;
-
- if (d->version != NFS_MOUNT_VERSION)
- goto out;
-
- if (d->context[0]) {
- context = kstrdup(d->context, GFP_KERNEL);
- if (!context) {
- rc = -ENOMEM;
- goto out;
- }
- }
- goto build_flags;
- } else
- goto out;
- }
+ opts->num_mnt_opts = 0;
/* Standard string-based options. */
while ((p = strsep(&options, "|")) != NULL) {
}
}
-build_flags:
+ rc = -ENOMEM;
+ opts->mnt_opts = kcalloc(NUM_SEL_MNT_OPTS, sizeof(char *), GFP_ATOMIC);
+ if (!opts->mnt_opts)
+ goto out_err;
+
+ opts->mnt_opts_flags = kcalloc(NUM_SEL_MNT_OPTS, sizeof(int), GFP_ATOMIC);
+ if (!opts->mnt_opts_flags) {
+ kfree(opts->mnt_opts);
+ goto out_err;
+ }
+
if (fscontext) {
- mnt_opts[num_mnt_opts] = fscontext;
- mnt_opts_flags[num_mnt_opts++] = FSCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = fscontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = FSCONTEXT_MNT;
}
if (context) {
- mnt_opts[num_mnt_opts] = context;
- mnt_opts_flags[num_mnt_opts++] = CONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = context;
+ opts->mnt_opts_flags[num_mnt_opts++] = CONTEXT_MNT;
}
if (rootcontext) {
- mnt_opts[num_mnt_opts] = rootcontext;
- mnt_opts_flags[num_mnt_opts++] = ROOTCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = rootcontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = ROOTCONTEXT_MNT;
}
if (defcontext) {
- mnt_opts[num_mnt_opts] = defcontext;
- mnt_opts_flags[num_mnt_opts++] = DEFCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = defcontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = DEFCONTEXT_MNT;
}
-out:
- rc = selinux_set_mnt_opts(sb, mnt_opts, mnt_opts_flags, num_mnt_opts);
+ opts->num_mnt_opts = num_mnt_opts;
+ return 0;
+
out_err:
kfree(context);
kfree(defcontext);
kfree(rootcontext);
return rc;
}
+/*
+ * string mount options parsing and call set the sbsec
+ */
+static int superblock_doinit(struct super_block *sb, void *data)
+{
+ int rc = 0;
+ char *options = data;
+ struct security_mnt_opts opts;
+
+ security_init_mnt_opts(&opts);
+
+ if (!data)
+ goto out;
+
+ BUG_ON(sb->s_type->fs_flags & FS_BINARY_MOUNTDATA);
+
+ rc = selinux_parse_opts_str(options, &opts);
+ if (rc)
+ goto out_err;
+
+out:
+ rc = selinux_set_mnt_opts(sb, &opts);
+
+out_err:
+ security_free_mnt_opts(&opts);
+ return rc;
+}
static inline u16 inode_mode_to_security_class(umode_t mode)
{
}
}
-static int selinux_sb_copy_data(struct file_system_type *type, void *orig, void *copy)
+static int selinux_sb_copy_data(char *orig, char *copy)
{
int fnosec, fsec, rc = 0;
char *in_save, *in_curr, *in_end;
in_curr = orig;
sec_curr = copy;
- /* Binary mount data: just copy */
- if (type->fs_flags & FS_BINARY_MOUNTDATA) {
- copy_page(sec_curr, in_curr);
- goto out;
- }
-
nosec = (char *)get_zeroed_page(GFP_KERNEL);
if (!nosec) {
rc = -ENOMEM;
.sb_get_mnt_opts = selinux_get_mnt_opts,
.sb_set_mnt_opts = selinux_set_mnt_opts,
.sb_clone_mnt_opts = selinux_sb_clone_mnt_opts,
+ .sb_parse_opts_str = selinux_parse_opts_str,
+
.inode_alloc_security = selinux_inode_alloc_security,
.inode_free_security = selinux_inode_free_security,
#define POLICYDB_VERSION_MAX POLICYDB_VERSION_POLCAP
#endif
+#define CONTEXT_MNT 0x01
+#define FSCONTEXT_MNT 0x02
+#define ROOTCONTEXT_MNT 0x04
+#define DEFCONTEXT_MNT 0x08
+
struct netlbl_lsm_secattr;
extern int selinux_enabled;
* Copy the Smack specific mount options out of the mount
* options list.
*/
-static int smack_sb_copy_data(struct file_system_type *type, void *orig,
- void *smackopts)
+static int smack_sb_copy_data(char *orig, char *smackopts)
{
char *cp, *commap, *otheropts, *dp;
- /* Binary mount data: just copy */
- if (type->fs_flags & FS_BINARY_MOUNTDATA) {
- copy_page(smackopts, orig);
- return 0;
- }
-
otheropts = (char *)get_zeroed_page(GFP_KERNEL);
if (otheropts == NULL)
return -ENOMEM;
case IOAPIC_LOWEST_PRIORITY:
vcpu = kvm_get_lowest_prio_vcpu(ioapic->kvm, vector,
deliver_bitmask);
+#ifdef CONFIG_X86
+ if (irq == 0)
+ vcpu = ioapic->kvm->vcpus[0];
+#endif
if (vcpu != NULL)
ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
deliver_bitmask, vector, IOAPIC_LOWEST_PRIORITY);
break;
case IOAPIC_FIXED:
+#ifdef CONFIG_X86
+ if (irq == 0)
+ deliver_bitmask = 1;
+#endif
for (vcpu_id = 0; deliver_bitmask != 0; vcpu_id++) {
if (!(deliver_bitmask & (1 << vcpu_id)))
continue;
kvm_io_bus_init(&kvm->pio_bus);
mutex_init(&kvm->lock);
kvm_io_bus_init(&kvm->mmio_bus);
+ init_rwsem(&kvm->slots_lock);
spin_lock(&kvm_lock);
list_add(&kvm->vm_list, &vm_list);
spin_unlock(&kvm_lock);
{
int r;
- down_write(¤t->mm->mmap_sem);
+ down_write(&kvm->slots_lock);
r = __kvm_set_memory_region(kvm, mem, user_alloc);
- up_write(¤t->mm->mmap_sem);
+ up_write(&kvm->slots_lock);
return r;
}
EXPORT_SYMBOL_GPL(kvm_set_memory_region);
projects / linux-2.6-omap-h63xx.git / commitdiff