* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits)
Fix build break in tsi108.c
qeth: remove header_ops bug
ir-functions.c:(.text+0xbce18): undefined reference to `input_event'
NAPI: kconfig prompt and deleted doc file
phy/bitbang: missing MODULE_LICENSE
DM9000 initialization fix
[PATCH] rt2x00: Add new rt73usb USB ID
[PATCH] rt2x00: Fix residual check in PLCP calculations.
[PATCH] iwlwifi: Fix rate setting in probe request for HW sacn
[PATCH] b43: Make b43_stop() static
[PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable
[PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs
[PATCH] zd1211rw, fix oops when ejecting install media
[PATCH] b43legacy: Fix potential return of uninitialized variable
[PATCH] iwl4965-base.c: fix off-by-one errors
[PATCH] p54: Make filter configuration atomic
[PATCH] rtl8187: remove NICMAC setting in configure_filters callback
[PATCH] janitorial: fix all double includes in drivers/net/wireless
[PATCH] rtl8187: Fix more frag bit checking, rts duration calc
[PATCH] ipw2100: send WEXT scan events
...
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config AMD8111_ETH
will be called amd8111e.
config AMD8111E_NAPI
- bool "Enable NAPI support"
+ bool "Use RX polling (NAPI)"
depends on AMD8111_ETH
help
NAPI is a new driver API designed to reduce CPU and interrupt load
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config ADAPTEC_STARFIRE
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config AC3200
called forcedeth.
config FORCEDETH_NAPI
- bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on FORCEDETH && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config CS89x0
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
config LAN_SAA9730
bool "Philips SAA9730 Ethernet support"
depends on NET_PCI && PCI && MIPS_ATLAS
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config E1000_DISABLE_PACKET_SPLIT
will be called r8169. This is recommended.
config R8169_NAPI
- bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)"
+ bool "Use Rx Polling (NAPI) (EXPERIMENTAL)"
depends on R8169 && EXPERIMENTAL
help
NAPI is a new driver API designed to reduce CPU and interrupt load
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config R8169_VLAN
and MPC86xx family of chips, and the FEC on the 8540.
config GFAR_NAPI
- bool "NAPI Support"
+ bool "Use Rx Polling (NAPI)"
depends on GIANFAR
config UCC_GETH
which is available on some Freescale SOCs.
config UGETH_NAPI
- bool "NAPI Support"
+ bool "Use Rx Polling (NAPI)"
depends on UCC_GETH
config UGETH_MAGIC_PACKET
config EHEA
tristate "eHEA Ethernet support"
- depends on IBMEBUS
+ depends on IBMEBUS && INET
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config S2IO
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config MYRI10GE
tristate "Myricom Myri-10G Ethernet support"
- depends on PCI
+ depends on PCI && INET
select FW_LOADER
select CRC32
select INET_LRO
if (id_val != DM9000_ID) {
printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
- goto release;
+ ret = -ENODEV;
+ goto out;
}
/* from this point we assume that we have found a DM9000 */
}
return 0;
- release:
- out:
+out:
printk("%s: not found (%d).\n", CARDNAME, ret);
dm9000_release_board(pdev, db);
module_put(ctrl->ops->owner);
kfree(bus);
}
+
+MODULE_LICENSE("GPL");
goto register_fail;
}
- printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n"
+ printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n",
dev->name, print_mac(mac, dev->dev_addr));
#ifdef DEBUG
data->msg_enable = DEBUG;
If in doubt, say N.
config TULIP_NAPI
- bool "Use NAPI RX polling "
+ bool "Use RX polling (NAPI)"
depends on TULIP
help
NAPI is a new driver API designed to reduce CPU and interrupt load
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
- See <file:Documentation/networking/NAPI_HOWTO.txt> for more
- information.
-
If in doubt, say N.
config TULIP_NAPI_HW_MITIGATION
- bool "Use Interrupt Mitigation "
+ bool "Use Interrupt Mitigation"
depends on TULIP_NAPI
---help---
- Use HW to reduce RX interrupts. Not strict necessary since NAPI reduces
- RX interrupts but itself. Although this reduces RX interrupts even at
- low levels traffic at the cost of a small latency.
+ Use HW to reduce RX interrupts. Not strictly necessary since NAPI
+ reduces RX interrupts by itself. Interrupt mitigation reduces RX
+ interrupts even at low levels of traffic at the cost of a small
+ latency.
If in doubt, say Y.
#include "pio.h"
#include "sysfs.h"
#include "xmit.h"
-#include "sysfs.h"
#include "lo.h"
#include "pcmcia.h"
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
int did_init = 0;
- int err;
+ int err = 0;
mutex_lock(&wl->mutex);
return err;
}
-void b43_stop(struct ieee80211_hw *hw)
+static void b43_stop(struct ieee80211_hw *hw)
{
struct b43_wl *wl = hw_to_b43_wl(hw);
struct b43_wldev *dev = wl->current_dev;
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
int did_init = 0;
- int err;
+ int err = 0;
mutex_lock(&wl->mutex);
queue_delayed_work(priv->workqueue, &priv->rf_kill, round_jiffies(HZ));
}
+static void send_scan_event(void *data)
+{
+ struct ipw2100_priv *priv = data;
+ union iwreq_data wrqu;
+
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
+}
+
+static void ipw2100_scan_event_later(struct work_struct *work)
+{
+ send_scan_event(container_of(work, struct ipw2100_priv,
+ scan_event_later.work));
+}
+
+static void ipw2100_scan_event_now(struct work_struct *work)
+{
+ send_scan_event(container_of(work, struct ipw2100_priv,
+ scan_event_now));
+}
+
static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
{
IPW_DEBUG_SCAN("scan complete\n");
/* Age the scan results... */
priv->ieee->scans++;
priv->status &= ~STATUS_SCANNING;
+
+ /* Only userspace-requested scan completion events go out immediately */
+ if (!priv->user_requested_scan) {
+ if (!delayed_work_pending(&priv->scan_event_later))
+ queue_delayed_work(priv->workqueue,
+ &priv->scan_event_later,
+ round_jiffies(msecs_to_jiffies(4000)));
+ } else {
+ priv->user_requested_scan = 0;
+ cancel_delayed_work(&priv->scan_event_later);
+ queue_work(priv->workqueue, &priv->scan_event_now);
+ }
}
#ifdef CONFIG_IPW2100_DEBUG
cancel_delayed_work(&priv->wx_event_work);
cancel_delayed_work(&priv->hang_check);
cancel_delayed_work(&priv->rf_kill);
+ cancel_delayed_work(&priv->scan_event_later);
destroy_workqueue(priv->workqueue);
priv->workqueue = NULL;
}
INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
+ INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
+ INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
ipw2100_irq_tasklet, (unsigned long)priv);
}
IPW_DEBUG_WX("Initiating scan...\n");
+
+ priv->user_requested_scan = 1;
if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
IPW_DEBUG_WX("Start scan failed.\n");
struct delayed_work wx_event_work;
struct delayed_work hang_check;
struct delayed_work rf_kill;
+ struct work_struct scan_event_now;
+ struct delayed_work scan_event_later;
+
+ int user_requested_scan;
u32 interrupts;
int tx_interrupts;
#include <linux/workqueue.h>
-#include <net/mac80211.h>
-#include <linux/wireless.h>
-
#define IWL 3945
#include "../net/mac80211/ieee80211_rate.h"
#include <net/mac80211.h>
#include <linux/etherdevice.h>
-#include <linux/delay.h>
#define IWL 3945
#include <linux/workqueue.h>
-#include <net/mac80211.h>
-#include <linux/wireless.h>
-
#define IWL 4965
#include "../net/mac80211/ieee80211_rate.h"
static void rs_dbgfs_set_mcs(struct iwl_rate_scale_priv *rs_priv,
struct iwl_rate *mcs, int index)
{
- const u32 cck_rate = 0x820A;
+ u32 base_rate;
+
+ if (rs_priv->phymode == (u8) MODE_IEEE80211A)
+ base_rate = 0x800D;
+ else
+ base_rate = 0x820A;
+
if (rs_priv->dbg_fixed.rate_n_flags) {
if (index < 12)
mcs->rate_n_flags = rs_priv->dbg_fixed.rate_n_flags;
else
- mcs->rate_n_flags = cck_rate;
+ mcs->rate_n_flags = base_rate;
IWL_DEBUG_RATE("Fixed rate ON\n");
return;
}
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/delay.h>
#define IWL 4965
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
* return : set the bit for each supported rate insert in ie
*/
static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int max_count)
+ u16 basic_rate, int *left)
{
u16 ret_rates = 0, bit;
int i;
- u8 *rates;
-
- rates = &(ie[1]);
+ u8 *cnt = ie;
+ u8 *rates = ie + 1;
for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
if (bit & supported_rate) {
ret_rates |= bit;
- rates[*ie] = iwl_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- *ie = *ie + 1;
- if (*ie >= max_count)
+ rates[*cnt] = iwl_rates[i].ieee |
+ ((bit & basic_rate) ? 0x80 : 0x00);
+ (*cnt)++;
+ (*left)--;
+ if ((*left <= 0) ||
+ (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
break;
}
}
{
int len = 0;
u8 *pos = NULL;
- u16 ret_rates;
+ u16 active_rates, ret_rates, cck_rates;
/* Make sure there is enough space for the probe request,
* two mandatory IEs and the data */
left -= 2;
if (left < 0)
return 0;
+
/* ... fill it in... */
*pos++ = WLAN_EID_SUPP_RATES;
*pos = 0;
- ret_rates = priv->active_rate = priv->rates_mask;
+
+ priv->active_rate = priv->rates_mask;
+ active_rates = priv->active_rate;
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
- iwl_supported_rate_to_ie(pos, priv->active_rate,
- priv->active_rate_basic, left);
+ cck_rates = IWL_CCK_RATES_MASK & active_rates;
+ ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
+ priv->active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
+ priv->active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
len += 2 + *pos;
pos += (*pos) + 1;
- ret_rates = ~ret_rates & priv->active_rate;
-
- if (ret_rates == 0)
+ if (active_rates == 0)
goto fill_end;
/* fill in supported extended rate */
/* ... fill it in... */
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos = 0;
- iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left);
+ iwl_supported_rate_to_ie(pos, active_rates,
+ priv->active_rate_basic, &left);
if (*pos > 0)
len += 2 + *pos;
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/firmware.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
* return : set the bit for each supported rate insert in ie
*/
static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int max_count)
+ u16 basic_rate, int *left)
{
u16 ret_rates = 0, bit;
int i;
- u8 *rates;
-
- rates = &(ie[1]);
+ u8 *cnt = ie;
+ u8 *rates = ie + 1;
for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
if (bit & supported_rate) {
ret_rates |= bit;
- rates[*ie] = iwl_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- *ie = *ie + 1;
- if (*ie >= max_count)
+ rates[*cnt] = iwl_rates[i].ieee |
+ ((bit & basic_rate) ? 0x80 : 0x00);
+ (*cnt)++;
+ (*left)--;
+ if ((*left <= 0) ||
+ (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
break;
}
}
{
int len = 0;
u8 *pos = NULL;
- u16 ret_rates;
+ u16 active_rates, ret_rates, cck_rates;
/* Make sure there is enough space for the probe request,
* two mandatory IEs and the data */
left -= 2;
if (left < 0)
return 0;
+
/* ... fill it in... */
*pos++ = WLAN_EID_SUPP_RATES;
*pos = 0;
- ret_rates = priv->active_rate = priv->rates_mask;
+
+ priv->active_rate = priv->rates_mask;
+ active_rates = priv->active_rate;
priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
- iwl_supported_rate_to_ie(pos, priv->active_rate,
- priv->active_rate_basic, left);
+ cck_rates = IWL_CCK_RATES_MASK & active_rates;
+ ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
+ priv->active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
+ ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
+ priv->active_rate_basic, &left);
+ active_rates &= ~ret_rates;
+
len += 2 + *pos;
pos += (*pos) + 1;
- ret_rates = ~ret_rates & priv->active_rate;
-
- if (ret_rates == 0)
+ if (active_rates == 0)
goto fill_end;
/* fill in supported extended rate */
/* ... fill it in... */
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos = 0;
- iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left);
+ iwl_supported_rate_to_ie(pos, active_rates,
+ priv->active_rate_basic, &left);
if (*pos > 0)
len += 2 + *pos;
* Conversion assumes that levels are voltages (20*log), not powers (10*log). */
int iwl_calc_db_from_ratio(int sig_ratio)
{
- /* Anything above 1000:1 just report as 60 dB */
- if (sig_ratio > 1000)
+ /* 1000:1 or higher just report as 60 dB */
+ if (sig_ratio >= 1000)
return 60;
- /* Above 100:1, divide by 10 and use table,
+ /* 100:1 or higher, divide by 10 and use table,
* add 20 dB to make up for divide by 10 */
- if (sig_ratio > 100)
+ if (sig_ratio >= 100)
return (20 + (int)ratio2dB[sig_ratio/10]);
/* We shouldn't see this */
/* Hardware specific file defines the PCI IDs table for that hardware module */
extern struct pci_device_id iwl_hw_card_ids[];
+#include "iwl-hw.h"
#if IWL == 3945
-
#define DRV_NAME "iwl3945"
-#include "iwl-hw.h"
#include "iwl-3945-hw.h"
-
#elif IWL == 4965
-
#define DRV_NAME "iwl4965"
-#include "iwl-hw.h"
#include "iwl-4965-hw.h"
-
#endif
#include "iwl-prph.h"
struct p54_tx_control_filter *filter;
hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) +
- priv->tx_hdr_len, GFP_KERNEL);
+ priv->tx_hdr_len, GFP_ATOMIC);
if (!hdr)
return -ENOMEM;
/*
* Check if we need to set the Length Extension
*/
- if (bitrate == 110 && residual <= 3)
+ if (bitrate == 110 && residual <= 30)
desc.service |= 0x80;
}
{ USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
/* Billionton */
{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
/* Buffalo */
struct rtl8187_tx_hdr *hdr;
struct rtl8187_tx_info *info;
struct urb *urb;
- u32 tmp;
+ __le16 rts_dur = 0;
+ u32 flags;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
return 0;
}
- hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
- tmp = skb->len - sizeof(*hdr);
- tmp |= RTL8187_TX_FLAG_NO_ENCRYPT;
- tmp |= control->rts_cts_rate << 19;
- tmp |= control->tx_rate << 24;
- if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb))
- tmp |= RTL8187_TX_FLAG_MORE_FRAG;
+ flags = skb->len;
+ flags |= RTL8187_TX_FLAG_NO_ENCRYPT;
+ flags |= control->rts_cts_rate << 19;
+ flags |= control->tx_rate << 24;
+ if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb->data))
+ flags |= RTL8187_TX_FLAG_MORE_FRAG;
if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) {
- tmp |= RTL8187_TX_FLAG_RTS;
- hdr->rts_duration =
- ieee80211_rts_duration(dev, priv->if_id, skb->len, control);
+ flags |= RTL8187_TX_FLAG_RTS;
+ rts_dur = ieee80211_rts_duration(dev, priv->if_id, skb->len, control);
}
if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
- tmp |= RTL8187_TX_FLAG_CTS;
- hdr->flags = cpu_to_le32(tmp);
+ flags |= RTL8187_TX_FLAG_CTS;
+
+ hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
+ hdr->flags = cpu_to_le32(flags);
hdr->len = 0;
- tmp = control->retry_limit << 8;
- hdr->retry = cpu_to_le32(tmp);
+ hdr->rts_duration = rts_dur;
+ hdr->retry = cpu_to_le32(control->retry_limit << 8);
info = (struct rtl8187_tx_info *)skb->cb;
info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC);
*total_flags = 0;
- if (changed_flags & FIF_PROMISC_IN_BSS)
- priv->rx_conf ^= RTL818X_RX_CONF_NICMAC;
if (changed_flags & FIF_ALLMULTI)
priv->rx_conf ^= RTL818X_RX_CONF_MULTICAST;
if (changed_flags & FIF_FCSFAIL)
if (mc_count > 0)
priv->rx_conf |= RTL818X_RX_CONF_MULTICAST;
- if (priv->rx_conf & RTL818X_RX_CONF_NICMAC)
- *total_flags |= FIF_PROMISC_IN_BSS;
if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST)
*total_flags |= FIF_ALLMULTI;
if (priv->rx_conf & RTL818X_RX_CONF_FCS)
memcpy(skb_put(skb, 6), &data[datalen-8], 6);
memcpy(skb_put(skb, 2), &data[datalen-24], 2);
memcpy(skb_put(skb, len), data, len);
- skb->dev->last_rx = jiffies;
skb->protocol = eth_type_trans(skb, zd->dev);
+ skb->dev->last_rx = jiffies;
zd->stats.rx_packets++;
zd->stats.rx_bytes += skb->len;
netif_rx(skb);
memcpy(skb_put(skb, 2), &data[6], 2);
memcpy(skb_put(skb, len), data+8, len);
}
- skb->dev->last_rx = jiffies;
skb->protocol = eth_type_trans(skb, zd->dev);
+ skb->dev->last_rx = jiffies;
zd->stats.rx_packets++;
zd->stats.rx_bytes += skb->len;
netif_rx(skb);
static void disconnect(struct usb_interface *intf)
{
struct net_device *netdev = zd_intf_to_netdev(intf);
- struct zd_mac *mac = zd_netdev_mac(netdev);
- struct zd_usb *usb = &mac->chip.usb;
+ struct zd_mac *mac;
+ struct zd_usb *usb;
/* Either something really bad happened, or we're just dealing with
* a DEVICE_INSTALLER. */
if (netdev == NULL)
return;
+ mac = zd_netdev_mac(netdev);
+ usb = &mac->chip.usb;
+
dev_dbg_f(zd_usb_dev(usb), "\n");
zd_netdev_disconnect(netdev);
dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid;
dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid;
#endif
- dev->header_ops = &qeth_null_ops;
+ if (qeth_get_netdev_flags(card) & IFF_NOARP)
+ dev->header_ops = &qeth_null_ops;
#ifdef CONFIG_QETH_IPV6
/*IPv6 address autoconfiguration stuff*/
projects / linux-2.6-omap-h63xx.git / commitdiff