add     \rb, \rb, #0x00010000   @ Ser1
 #endif
                .endm
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
                .macro loadsp, rb
                 mov    \rb, #0xff000000
                 orr     \rb, \rb, #0x00ff0000
 
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 CONFIG_ARCH_EP80219=y
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features
 
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features
 
 # CONFIG_ARCH_IQ80331 is not set
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP321=y
-# CONFIG_ARCH_IOP331 is not set
+CONFIG_ARCH_IOP32X=y
+# CONFIG_ARCH_IOP33X is not set
 
 #
 # IOP3xx Chipset Features
 
 CONFIG_ARCH_IQ80331=y
 # CONFIG_MACH_IQ80332 is not set
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
+CONFIG_ARCH_IOP33X=y
 
 #
 # IOP3xx Chipset Features
 
 # CONFIG_ARCH_IQ80331 is not set
 CONFIG_MACH_IQ80332=y
 # CONFIG_ARCH_EP80219 is not set
-CONFIG_ARCH_IOP331=y
+CONFIG_ARCH_IOP33X=y
 
 #
 # IOP3xx Chipset Features
 
 
 config ARCH_IQ80321
        bool "Enable support for IQ80321"
-       select ARCH_IOP321
+       select ARCH_IOP32X
        help
          Say Y here if you want to run your kernel on the Intel IQ80321
          evaluation kit for the IOP321 chipset.
 
 config ARCH_IQ31244
        bool "Enable support for IQ31244"
-       select ARCH_IOP321
+       select ARCH_IOP32X
        help
          Say Y here if you want to run your kernel on the Intel IQ31244
          evaluation kit for the IOP321 chipset.
 
 config ARCH_IQ80331
        bool "Enable support for IQ80331"
-       select ARCH_IOP331
+       select ARCH_IOP33X
        help
          Say Y here if you want to run your kernel on the Intel IQ80331
          evaluation kit for the IOP331 chipset.
 
 config MACH_IQ80332
        bool "Enable support for IQ80332"
-       select ARCH_IOP331
+       select ARCH_IOP33X
        help
          Say Y here if you want to run your kernel on the Intel IQ80332
          evaluation kit for the IOP332 chipset.
 
 config ARCH_EP80219
        bool "Enable support for EP80219"
-       select ARCH_IOP321
+       select ARCH_IOP32X
        select ARCH_IQ31244
        help
          Say Y here if you want to run your kernel on the Intel EP80219
          evaluation kit for the Intel 80219 chipset (a IOP321 variant).
 
 # Which IOP variant are we running?
-config ARCH_IOP321
+config ARCH_IOP32X
        bool
        help
          The IQ80321 uses the IOP321 variant.
          The IQ31244 and EP80219 uses the IOP321 variant.
 
-config ARCH_IOP331
+config ARCH_IOP33X
        bool
        default ARCH_IQ80331
        help
 
 config IOP331_STEPD
        bool "Chip stepping D of the IOP80331 processor or IOP80333"
-       depends on (ARCH_IOP331)
+       depends on ARCH_IOP33X
        help
          Say Y here if you have StepD of the IOP80331 or IOP8033
          based platforms.
 
 obj-n                  :=
 obj-                   :=
 
-obj-$(CONFIG_ARCH_IOP321)  += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
+obj-$(CONFIG_ARCH_IOP32X)  += iop321-setup.o iop321-irq.o iop321-pci.o iop321-time.o
 
-obj-$(CONFIG_ARCH_IOP331)  += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
+obj-$(CONFIG_ARCH_IOP33X)  += iop331-setup.o iop331-irq.o iop331-pci.o iop331-time.o
 
 obj-$(CONFIG_ARCH_IQ80321) += iq80321-mm.o iq80321-pci.o
 
 
    zreladdr-y  := 0xa0008000
 params_phys-y  := 0xa0000100
 initrd_phys-y  := 0xa0800000
-ifeq ($(CONFIG_ARCH_IOP331),y)
+ifeq ($(CONFIG_ARCH_IOP33X),y)
    zreladdr-y  := 0x00008000
 params_phys-y  := 0x00000100
 initrd_phys-y  := 0x00800000
 
        iotable_init(iop331_std_desc, ARRAY_SIZE(iop331_std_desc));
 }
 
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
 extern void iop331_init_irq(void);
 extern struct sys_timer iop331_timer;
 #endif
 
 #ifdef CONFIG_ARCH_IOP310
 #define XSCALE_PMU_IRQ  IRQ_XS80200_PMU
 #endif
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
 #define XSCALE_PMU_IRQ  IRQ_IOP321_CORE_PMU
 #endif
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
 #define XSCALE_PMU_IRQ  IRQ_IOP331_CORE_PMU
 #endif
 #ifdef CONFIG_ARCH_PXA
 
 
        /* 
         * Every time unit enable is asserted, GPOD needs to be cleared
-        * on IOP321 to avoid data corruption on the bus.
+        * on IOP32X to avoid data corruption on the bus.
         */
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
 #define IOP321_GPOD_I2C0    0x00c0  /* clear these bits to enable ch0 */
 #define IOP321_GPOD_I2C1    0x0030  /* clear these bits to enable ch1 */
 
 
                mov     \rx, #0xfe000000        @ physical
 #if defined(CONFIG_ARCH_IQ80321) || defined(CONFIG_ARCH_IQ31244)
                orr     \rx, \rx, #0x00800000   @ location of the UART
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
                mrc     p15, 0, \rx, c1, c0
                tst     \rx, #1                 @ MMU enabled?
                moveq   \rx, #0x000fe000        @ Physical Base
 
  */
 #include <asm/arch/irqs.h>
 
-#if defined(CONFIG_ARCH_IOP321)
+#if defined(CONFIG_ARCH_IOP32X)
                .macro  disable_fiq
                .endm
 
 1001:
                .endm
 
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
                .macro  disable_fiq
                .endm
 
 
  * IOP3xx variants but behave slightly differently on each.
  */
 #ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
 #define iop_is_321() (((processor_id & 0xfffff5e0) == 0x69052420))
 #else
 #define        iop_is_321()    0
 
  * IOP3xx variants but behave slightly differently on each.
  */
 #ifndef __ASSEMBLY__
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
 /*#define      iop_is_331()    ((processor_id & 0xffffffb0) == 0x69054090) */
 #define        iop_is_331()    ((processor_id & 0xffffff30) == 0x69054010)
 #else
 #define IOP331_TU_TISR    (volatile u32 *)IOP331_REG_ADDR(0x000007E8)
 #define IOP331_TU_WDTCR   (volatile u32 *)IOP331_REG_ADDR(0x000007EC)
 
-#if defined(CONFIG_ARCH_IOP331)
+#if defined(CONFIG_ARCH_IOP33X)
 #define        IOP331_TICK_RATE        266000000       /* 266 MHz IB clock */
 #endif
 
 
 /*
  * Chipset-specific bits
  */
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
 #include "iop321-irqs.h"
 #endif
 
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
 #include "iop331-irqs.h"
 #endif
 
 /*
  * Physical DRAM offset.
  */
-#ifndef CONFIG_ARCH_IOP331
+#ifndef CONFIG_ARCH_IOP33X
 #define PHYS_OFFSET    UL(0xa0000000)
 #else
 #define PHYS_OFFSET    UL(0x00000000)
  * bus_to_virt: Used to convert an address for DMA operations
  *             to an address that the kernel can use.
  */
-#if defined(CONFIG_ARCH_IOP321)
+#if defined(CONFIG_ARCH_IOP32X)
 
 #define __virt_to_bus(x)       (((__virt_to_phys(x)) & ~(*IOP321_IATVR2)) | ((*IOP321_IABAR2) & 0xfffffff0))
 #define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP321_IALR2)) | ( *IOP321_IATVR2)))
 
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
 
 #define __virt_to_bus(x)       (((__virt_to_phys(x)) & ~(*IOP331_IATVR2)) | ((*IOP331_IABAR2) & 0xfffffff0))
 #define __bus_to_virt(x)    (__phys_to_virt(((x) & ~(*IOP331_IALR2)) | ( *IOP331_IATVR2)))
 
 
 static inline void arch_reset(char mode)
 {
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
     *IOP321_PCSR = 0x30;
 #endif
 
-#ifdef CONFIG_ARCH_IOP331
+#ifdef CONFIG_ARCH_IOP33X
     *IOP331_PCSR = 0x30;
 #endif
 
 
 #include <linux/serial_reg.h>
 #include <asm/hardware.h>
 
-#ifdef CONFIG_ARCH_IOP321
+#ifdef CONFIG_ARCH_IOP32X
 #define UTYPE unsigned char *
-#elif defined(CONFIG_ARCH_IOP331)
+#elif defined(CONFIG_ARCH_IOP33X)
 #define UTYPE u32 *
 #else
 #error "Missing IOP3xx arch type def"