If you have problems with this please do ask on the mailing list.
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
+Authors: Richard Walker,
+ Jamie Honan,
+ Michael Hunold,
+ Manu Abraham,
+ Michael Krufky
12 -> Medion 7134 [16be:0003]
13 -> Typhoon TV+Radio 90031
14 -> ELSA EX-VISION 300TV [1048:226b]
- 15 -> ELSA EX-VISION 500TV [1048:226b]
+ 15 -> ELSA EX-VISION 500TV [1048:226a]
16 -> ASUS TV-FM 7134 [1043:4842,1043:4830,1043:4840]
17 -> AOPEN VA1000 POWER [1131:7133]
18 -> BMK MPEX No Tuner
74 -> LifeView FlyTV Platinum Mini2 [14c0:1212]
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
- 77 -> Pinnacle PCTV 110i (saa7133) [11bd:002e]
+ 77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
DVB SUBSYSTEM AND DRIVERS
P: LinuxTV.org Project
-M: mchehab@infradead.org
M: v4l-dvb-maintainer@linuxtv.org
L: linux-dvb@linuxtv.org (subscription required)
W: http://linuxtv.org/
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- if ((fc->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
+ if ((fc->fe = vp310_mt312_attach(&skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
ops = fc->fe->ops;
ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
EXPORT_SYMBOL(bt878_device_control);
-struct cards card_list[] __devinitdata = {
+static struct cards card_list[] __devinitdata = {
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
*/
-struct dst_types dst_tlist[] = {
+static struct dst_types dst_tlist[] = {
{
.device_id = "200103A",
.offset = 0,
/*--------------------------------------------------------------------------*/
/*
- * Flags OR'ed in the capabilites field of struct dmx_demux.
+ * Flags OR'ed in the capabilities field of struct dmx_demux.
*/
#define DMX_TS_FILTERING 1
.pll_set = dvb_usb_pll_set_i2c,
};
-static struct lgdt330x_config cxusb_lgdt330x_config = {
+static struct lgdt330x_config cxusb_lgdt3303_config = {
.demod_address = 0x0e,
.demod_chip = LGDT3303,
.pll_set = dvb_usb_pll_set_i2c,
return -EIO;
}
-static int cxusb_lgdt330x_frontend_attach(struct dvb_usb_device *d)
+static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_device *d)
{
if (usb_set_interface(d->udev,0,7) < 0)
err("set interface failed");
cxusb_ctrl_msg(d,CMD_DIGITAL, NULL, 0, NULL, 0);
- if ((d->fe = lgdt330x_attach(&cxusb_lgdt330x_config, &d->i2c_adap)) != NULL)
+ if ((d->fe = lgdt330x_attach(&cxusb_lgdt3303_config, &d->i2c_adap)) != NULL)
return 0;
return -EIO;
.streaming_ctrl = cxusb_streaming_ctrl,
.power_ctrl = cxusb_power_ctrl,
- .frontend_attach = cxusb_lgdt330x_frontend_attach,
+ .frontend_attach = cxusb_lgdt3303_frontend_attach,
.tuner_attach = cxusb_lgh064f_tuner_attach,
.i2c_algo = &cxusb_i2c_algo,
d->state = DVB_USB_STATE_INIT;
-/* check the capabilites and set appropriate variables */
+/* check the capabilities and set appropriate variables */
/* speed - when running at FULL speed we need a HW PID filter */
if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) {
/**
* struct dvb_usb_properties - properties of a dvb-usb-device
- * @caps: capabilites of the DVB USB device.
+ * @caps: capabilities of the DVB USB device.
* @pid_filter_count: number of PID filter position in the optional hardware
* PID-filter.
*
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
- tristate "Zarlink MT312 based"
+ tristate "Zarlink VP310/MT312 based"
depends on DVB_CORE
help
A DVB-S tuner module. Say Y when you want to support this frontend.
kfree(state);
}
-static struct dvb_frontend_ops vp310_mt312_ops;
-
-struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_VP310) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 90;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
-struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c)
-{
- struct mt312_state* state = NULL;
-
- /* allocate memory for the internal state */
- state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
- if (state == NULL)
- goto error;
-
- /* setup the state */
- state->config = config;
- state->i2c = i2c;
- memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
- strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
-
- /* check if the demod is there */
- if (mt312_readreg(state, ID, &state->id) < 0)
- goto error;
- if (state->id != ID_MT312) {
- goto error;
- }
-
- /* create dvb_frontend */
- state->frequency = 60;
- state->frontend.ops = &state->ops;
- state->frontend.demodulator_priv = state;
- return &state->frontend;
-
-error:
- kfree(state);
- return NULL;
-}
-
static struct dvb_frontend_ops vp310_mt312_ops = {
.info = {
.set_voltage = mt312_set_voltage,
};
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c)
+{
+ struct mt312_state* state = NULL;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
+
+ /* check if the demod is there */
+ if (mt312_readreg(state, ID, &state->id) < 0)
+ goto error;
+
+ switch (state->id) {
+ case ID_VP310:
+ strcpy(state->ops.info.name, "Zarlink VP310 DVB-S");
+ state->frequency = 90;
+ break;
+ case ID_MT312:
+ strcpy(state->ops.info.name, "Zarlink MT312 DVB-S");
+ state->frequency = 60;
+ break;
+ default:
+ printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
+ goto error;
+ }
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
MODULE_LICENSE("GPL");
-EXPORT_SYMBOL(mt312_attach);
-EXPORT_SYMBOL(vp310_attach);
+EXPORT_SYMBOL(vp310_mt312_attach);
int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
};
-extern struct dvb_frontend* mt312_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
+struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
+ struct i2c_adapter* i2c);
-extern struct dvb_frontend* vp310_attach(const struct mt312_config* config,
- struct i2c_adapter* i2c);
#endif // MT312_H
break;
case QAM_128:
- delay = 150;
- sweeprate = 1000;
- break;
-
case QAM_256:
delay = 200;
sweeprate = 500;
len = ntohl(*(u32*) ptr);
ptr += 4;
if (len >= 512) {
- printk("dvb-ttpci: dpram file is way to big.\n");
+ printk("dvb-ttpci: dpram file is way too big.\n");
return -EINVAL;
}
if (crc != crc32_le(0, ptr, len)) {
* The same behaviour of missing VSYNC can be duplicated on budget
* cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
*/
-static int av7110_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *pci_ext)
+static int __devinit av7110_attach(struct saa7146_dev* dev,
+ struct saa7146_pci_extension_data *pci_ext)
{
const int length = TS_WIDTH * TS_HEIGHT;
struct pci_dev *pdev = dev->pci;
goto out;
}
-static int av7110_detach(struct saa7146_dev* saa)
+static int __devexit av7110_detach(struct saa7146_dev* saa)
{
struct av7110 *av7110 = saa->ext_priv;
dprintk(4, "%p\n", av7110);
.module = THIS_MODULE,
.pci_tbl = &pci_tbl[0],
.attach = av7110_attach,
- .detach = av7110_detach,
+ .detach = __devexit_p(av7110_detach),
.irq_mask = MASK_19 | MASK_03 | MASK_10,
.irq_func = av7110_irq,
/* test DEBI */
iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+ /* FIXME: Why does Nexus CA require 2x iwdebi for first init? */
+ iwdebi(av7110, DEBISWAP, DPRAM_BASE, 0x76543210, 4);
+
if ((ret=irdebi(av7110, DEBINOSWAP, DPRAM_BASE, 0, 4)) != 0x10325476) {
printk(KERN_ERR "dvb-ttpci: debi test in av7110_bootarm() failed: "
"%08x != %08x (check your BIOS 'Plug&Play OS' settings)\n",
}
-int __init av7110_ir_init(struct av7110 *av7110)
+int __devinit av7110_ir_init(struct av7110 *av7110)
{
static struct proc_dir_entry *e;
}
-void __exit av7110_ir_exit(struct av7110 *av7110)
+void __devexit av7110_ir_exit(struct av7110 *av7110)
{
int i;
//DBG("cpia_ioctl: %u\n", ioctlnr);
switch (ioctlnr) {
- /* query capabilites */
+ /* query capabilities */
case VIDIOCGCAP:
{
struct video_capability *b = arg;
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Contrast",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
.type = V4L2_CTRL_TYPE_INTEGER,
.name = "Saturation",
.minimum = 0,
- .maximum = 255,
+ .maximum = 127,
.step = 1,
.default_value = 64,
.flags = 0,
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
+static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
+module_param_array(enable, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for SAA7134 capture interface(s).");
+MODULE_PARM_DESC(enable, "Enable (or not) the SAA7134 capture interface(s).");
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/alsa: " fmt, dev->name , ##arg)
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.inputs = {{
.name = name_tv,
.vmux = 3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_ACTIVE,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_INTERCARRIER | TDA9887_PORT2_INACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.radio_type = UNSET,
.tuner_addr = 0x61,
.radio_addr = ADDR_UNSET,
- .tda9887_conf = TDA9887_PRESENT,
+ .tda9887_conf = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
}},
},
[SAA7134_BOARD_PINNACLE_PCTV_110i] = {
- .name = "Pinnacle PCTV 110i (saa7133)",
+ .name = "Pinnacle PCTV 40i/50i/110i (saa7133)",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
},{
.name = name_comp1,
.vmux = 1,
+ .amux = LINE2,
+ },{
+ .name = name_comp2,
+ .vmux = 0,
.amux = LINE2,
},{
.name = name_svideo,
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x1048,
- .subdevice = 0x226b,
+ .subdevice = 0x226a,
.driver_data = SAA7134_BOARD_ELSA_500TV,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+ case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
+ /* this turns the remote control chip off to work around a bug in it */
+ saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
+ saa_writeb(SAA7134_GPIO_GPSTATUS1, 0x80);
+ break;
case SAA7134_BOARD_MONSTERTV_MOBILE:
/* power-up tuner chip */
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x00040000, 0x00040000);
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
+
return 0;
}
struct dvb_frontend_parameters* params,
u8* pllbuf)
{
- static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
- static int off = TDA9887_PRESENT | TDA9887_PORT2_ACTIVE;
+ u8 off[] = { 0x00, 0xf1};
+ u8 on[] = { 0x00, 0x71};
+ struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
+
struct saa7134_dev *dev = fe->dvb->priv;
struct v4l2_frequency f;
f.tuner = 0;
f.type = V4L2_TUNER_DIGITAL_TV;
f.frequency = params->frequency / 1000 * 16 / 1000;
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&off);
+ msg.buf = on;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
pinnacle_antenna_pwr(dev, antenna_pwr);
int tda8290_probe(struct i2c_client *c)
{
- unsigned char soft_reset[] = { 0x00, 0x00 };
- unsigned char easy_mode_b[] = { 0x01, 0x02 };
- unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char soft_reset[] = { 0x00, 0x00 };
+ unsigned char easy_mode_b[] = { 0x01, 0x02 };
+ unsigned char easy_mode_g[] = { 0x01, 0x04 };
+ unsigned char restore_9886[] = { 0x00, 0xd6, 0x30 };
unsigned char addr_dto_lsb = 0x07;
unsigned char data;
return 0;
}
}
+ i2c_master_send(c, restore_9886, 3);
return -1;
}
struct v4l2_frequency *f = arg;
switch_v4l2();
- if (V4L2_TUNER_RADIO == f->type &&
- V4L2_TUNER_RADIO != t->mode) {
+ if ((V4L2_TUNER_RADIO == f->type && V4L2_TUNER_RADIO != t->mode)
+ || (V4L2_TUNER_DIGITAL_TV == f->type
+ && V4L2_TUNER_DIGITAL_TV != t->mode)) {
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;
the slave is bound to it). Otherwise it doesn't need this functions and
therfor they may not be initialized.
- The other fuctions are just for convenience, as they are for shure used by
+ The other fuctions are just for convenience, as they are for sure used by
most/all of the codecs. The last ones may be ommited, too.
See the structure declaration below for more information and which data has
while (!(zr36050_read_status1(ptr) & 0x4)) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status1);
while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
udelay(1);
- if (i++ > 200000) { // 200ms, there is for shure something wrong!!!
+ if (i++ > 200000) { // 200ms, there is for sure something wrong!!!
dprintk(1,
"%s: timout at wait_end (last status: 0x%02x)\n",
ptr->name, ptr->status);
case I2C_DRIVERID_VIDEODECODER:
DEBUG(printk(CARD_INFO "decoder attached\n",CARD));
- /* fetch the capabilites of the decoder */
+ /* fetch the capabilities of the decoder */
rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc);
if (rv) {
DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD));
projects / linux-2.6-omap-h63xx.git / commitdiff