--- /dev/null
+/*
+Driver for Samsung S5H1420 QPSK Demodulator
+
+Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net>
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include "dvb_frontend.h"
+#include "s5h1420.h"
+
+
+
+#define TONE_FREQ 22000
+
+struct s5h1420_state {
+ struct i2c_adapter* i2c;
+ struct dvb_frontend_ops ops;
+ const struct s5h1420_config* config;
+ struct dvb_frontend frontend;
+
+ u8 postlocked:1;
+ u32 fclk;
+ u32 tunedfreq;
+ fe_code_rate_t fec_inner;
+ u32 symbol_rate;
+};
+
+static u32 s5h1420_getsymbolrate(struct s5h1420_state* state);
+static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings);
+
+
+static int debug = 0;
+#define dprintk if (debug) printk
+
+static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data)
+{
+ u8 buf [] = { reg, data };
+ struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
+ int err;
+
+ if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
+ dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
+ return -EREMOTEIO;
+ }
+
+ return 0;
+}
+
+static u8 s5h1420_readreg (struct s5h1420_state* state, u8 reg)
+{
+ int ret;
+ u8 b0 [] = { reg };
+ u8 b1 [] = { 0 };
+ struct i2c_msg msg1 = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 };
+ struct i2c_msg msg2 = { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 };
+
+ if ((ret = i2c_transfer (state->i2c, &msg1, 1)) != 1)
+ return ret;
+
+ if ((ret = i2c_transfer (state->i2c, &msg2, 1)) != 1)
+ return ret;
+
+ return b1[0];
+}
+
+static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ switch(voltage) {
+ case SEC_VOLTAGE_13:
+ s5h1420_writereg(state, 0x3c, (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02);
+ break;
+
+ case SEC_VOLTAGE_18:
+ s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03);
+ break;
+
+ case SEC_VOLTAGE_OFF:
+ s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd);
+ break;
+ }
+
+ return 0;
+}
+
+static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ switch(tone) {
+ case SEC_TONE_ON:
+ s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08);
+ break;
+
+ case SEC_TONE_OFF:
+ s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01);
+ break;
+ }
+
+ return 0;
+}
+
+static int s5h1420_send_master_cmd (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ u8 val;
+ int i;
+ unsigned long timeout;
+ int result = 0;
+
+ /* setup for DISEQC */
+ val = s5h1420_readreg(state, 0x3b);
+ s5h1420_writereg(state, 0x3b, 0x02);
+ msleep(15);
+
+ /* write the DISEQC command bytes */
+ for(i=0; i< cmd->msg_len; i++) {
+ s5h1420_writereg(state, 0x3c + i, cmd->msg[i]);
+ }
+
+ /* kick off transmission */
+ s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | ((cmd->msg_len-1) << 4) | 0x08);
+
+ /* wait for transmission to complete */
+ timeout = jiffies + ((100*HZ) / 1000);
+ while(time_before(jiffies, timeout)) {
+ if (s5h1420_readreg(state, 0x3b) & 0x08)
+ break;
+
+ msleep(5);
+ }
+ if (time_after(jiffies, timeout))
+ result = -ETIMEDOUT;
+
+ /* restore original settings */
+ s5h1420_writereg(state, 0x3b, val);
+ msleep(15);
+ return result;
+}
+
+static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ u8 val;
+ int i;
+ int length;
+ unsigned long timeout;
+ int result = 0;
+
+ /* setup for DISEQC recieve */
+ val = s5h1420_readreg(state, 0x3b);
+ s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
+ msleep(15);
+
+ /* wait for reception to complete */
+ timeout = jiffies + ((reply->timeout*HZ) / 1000);
+ while(time_before(jiffies, timeout)) {
+ if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */
+ break;
+
+ msleep(5);
+ }
+ if (time_after(jiffies, timeout)) {
+ result = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* check error flag - FIXME: not sure what this does - docs do not describe
+ * beyond "error flag for diseqc receive data :( */
+ if (s5h1420_readreg(state, 0x49)) {
+ result = -EIO;
+ goto exit;
+ }
+
+ /* check length */
+ length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4;
+ if (length > sizeof(reply->msg)) {
+ result = -EOVERFLOW;
+ goto exit;
+ }
+ reply->msg_len = length;
+
+ /* extract data */
+ for(i=0; i< length; i++) {
+ reply->msg[i] = s5h1420_readreg(state, 0x3c + i);
+ }
+
+exit:
+ /* restore original settings */
+ s5h1420_writereg(state, 0x3b, val);
+ msleep(15);
+ return result;
+}
+
+static int s5h1420_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ u8 val;
+ int result = 0;
+ unsigned long timeout;
+
+ /* setup for tone burst */
+ val = s5h1420_readreg(state, 0x3b);
+ s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01);
+
+ /* set value for B position if requested */
+ if (minicmd == SEC_MINI_B) {
+ s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04);
+ }
+ msleep(15);
+
+ /* start transmission */
+ s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08);
+
+ /* wait for transmission to complete */
+ timeout = jiffies + ((20*HZ) / 1000);
+ while(time_before(jiffies, timeout)) {
+ if (!(s5h1420_readreg(state, 0x3b) & 0x08))
+ break;
+
+ msleep(5);
+ }
+ if (time_after(jiffies, timeout))
+ result = -ETIMEDOUT;
+
+ /* restore original settings */
+ s5h1420_writereg(state, 0x3b, val);
+ msleep(15);
+ return result;
+}
+
+static fe_status_t s5h1420_get_status_bits(struct s5h1420_state* state)
+{
+ u8 val;
+ fe_status_t status = 0;
+
+ val = s5h1420_readreg(state, 0x14);
+ if (val & 0x02)
+ status |= FE_HAS_SIGNAL; // FIXME: not sure if this is right
+ if (val & 0x01)
+ status |= FE_HAS_CARRIER; // FIXME: not sure if this is right
+ val = s5h1420_readreg(state, 0x36);
+ if (val & 0x01)
+ status |= FE_HAS_VITERBI;
+ if (val & 0x20)
+ status |= FE_HAS_SYNC;
+ if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC))
+ status |= FE_HAS_LOCK;
+
+ return status;
+}
+
+static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ u8 val;
+
+ if (status == NULL)
+ return -EINVAL;
+
+ /* determine lock state */
+ *status = s5h1420_get_status_bits(state);
+
+ /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert the inversion,
+ wait a bit and check again */
+ if (*status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI)) {
+ val = s5h1420_readreg(state, 0x32);
+ if ((val & 0x07) == 0x03) {
+ if (val & 0x08)
+ s5h1420_writereg(state, 0x31, 0x13);
+ else
+ s5h1420_writereg(state, 0x31, 0x1b);
+
+ /* wait a bit then update lock status */
+ mdelay(200);
+ *status = s5h1420_get_status_bits(state);
+ }
+ }
+
+ /* perform post lock setup */
+ if ((*status & FE_HAS_LOCK) && (!state->postlocked)) {
+
+ /* calculate the data rate */
+ u32 tmp = s5h1420_getsymbolrate(state);
+ switch(s5h1420_readreg(state, 0x32) & 0x07) {
+ case 0:
+ tmp = (tmp * 2 * 1) / 2;
+ break;
+
+ case 1:
+ tmp = (tmp * 2 * 2) / 3;
+ break;
+
+ case 2:
+ tmp = (tmp * 2 * 3) / 4;
+ break;
+
+ case 3:
+ tmp = (tmp * 2 * 5) / 6;
+ break;
+
+ case 4:
+ tmp = (tmp * 2 * 6) / 7;
+ break;
+
+ case 5:
+ tmp = (tmp * 2 * 7) / 8;
+ break;
+ }
+ tmp = state->fclk / tmp;
+
+ /* set the MPEG_CLK_INTL for the calculated data rate */
+ if (tmp < 4)
+ val = 0x00;
+ else if (tmp < 8)
+ val = 0x01;
+ else if (tmp < 12)
+ val = 0x02;
+ else if (tmp < 16)
+ val = 0x03;
+ else if (tmp < 24)
+ val = 0x04;
+ else if (tmp < 32)
+ val = 0x05;
+ else
+ val = 0x06;
+ s5h1420_writereg(state, 0x22, val);
+
+ /* DC freeze */
+ s5h1420_writereg(state, 0x1f, s5h1420_readreg(state, 0x1f) | 0x01);
+
+ /* kicker disable + remove DC offset */
+ s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) & 0x6f);
+
+ /* post-lock processing has been done! */
+ state->postlocked = 1;
+ }
+
+ return 0;
+}
+
+static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ s5h1420_writereg(state, 0x46, 0x1d);
+ mdelay(25);
+ return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47);
+}
+
+static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ u8 val = 0xff - s5h1420_readreg(state, 0x15);
+
+ return (int) ((val << 8) | val);
+}
+
+static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ s5h1420_writereg(state, 0x46, 0x1f);
+ mdelay(25);
+ return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47);
+}
+
+static void s5h1420_reset(struct s5h1420_state* state)
+{
+ s5h1420_writereg (state, 0x01, 0x08);
+ s5h1420_writereg (state, 0x01, 0x00);
+ udelay(10);
+}
+
+static void s5h1420_setsymbolrate(struct s5h1420_state* state, struct dvb_frontend_parameters *p)
+{
+ u64 val;
+
+ val = (p->u.qpsk.symbol_rate / 1000) * (1<<24);
+ if (p->u.qpsk.symbol_rate <= 21000000) {
+ val *= 2;
+ }
+ do_div(val, (state->fclk / 1000));
+
+ s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0x7f);
+ s5h1420_writereg(state, 0x11, val >> 16);
+ s5h1420_writereg(state, 0x12, val >> 8);
+ s5h1420_writereg(state, 0x13, val & 0xff);
+ s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x80);
+}
+
+static u32 s5h1420_getsymbolrate(struct s5h1420_state* state)
+{
+ u64 val;
+ int sampling = 2;
+
+ if (s5h1420_readreg(state, 0x05) & 0x2)
+ sampling = 1;
+
+ s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08);
+ val = s5h1420_readreg(state, 0x11) << 16;
+ val |= s5h1420_readreg(state, 0x12) << 8;
+ val |= s5h1420_readreg(state, 0x13);
+ s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7);
+
+ val *= (state->fclk / 1000);
+ do_div(val, ((1<<24) * sampling));
+
+ return (u32) (val * 1000);
+}
+
+static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset)
+{
+ int val;
+
+ /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so
+ * divide fclk by 1000000 to get the correct value. */
+ val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000));
+
+ s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0xbf);
+ s5h1420_writereg(state, 0x0e, val >> 16);
+ s5h1420_writereg(state, 0x0f, val >> 8);
+ s5h1420_writereg(state, 0x10, val & 0xff);
+ s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x40);
+}
+
+static int s5h1420_getfreqoffset(struct s5h1420_state* state)
+{
+ int val;
+
+ s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08);
+ val = s5h1420_readreg(state, 0x0e) << 16;
+ val |= s5h1420_readreg(state, 0x0f) << 8;
+ val |= s5h1420_readreg(state, 0x10);
+ s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7);
+
+ if (val & 0x800000)
+ val |= 0xff000000;
+
+ /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so
+ * divide fclk by 1000000 to get the correct value. */
+ val = - ((val * (state->fclk/1000000)) / (1<<24));
+
+ return val;
+}
+
+static void s5h1420_setfec(struct s5h1420_state* state, struct dvb_frontend_parameters *p)
+{
+ if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) {
+ s5h1420_writereg(state, 0x31, 0x00);
+ s5h1420_writereg(state, 0x30, 0x3f);
+ } else {
+ switch(p->u.qpsk.fec_inner) {
+ case FEC_1_2:
+ s5h1420_writereg(state, 0x31, 0x10);
+ s5h1420_writereg(state, 0x30, 0x01);
+ break;
+
+ case FEC_2_3:
+ s5h1420_writereg(state, 0x31, 0x11);
+ s5h1420_writereg(state, 0x30, 0x02);
+ break;
+
+ case FEC_3_4:
+ s5h1420_writereg(state, 0x31, 0x12);
+ s5h1420_writereg(state, 0x30, 0x04);
+ break;
+
+ case FEC_5_6:
+ s5h1420_writereg(state, 0x31, 0x13);
+ s5h1420_writereg(state, 0x30, 0x08);
+ break;
+
+ case FEC_6_7:
+ s5h1420_writereg(state, 0x31, 0x14);
+ s5h1420_writereg(state, 0x30, 0x10);
+ break;
+
+ case FEC_7_8:
+ s5h1420_writereg(state, 0x31, 0x15);
+ s5h1420_writereg(state, 0x30, 0x20);
+ break;
+
+ default:
+ return;
+ }
+ }
+}
+
+static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state)
+{
+ switch(s5h1420_readreg(state, 0x32) & 0x07) {
+ case 0:
+ return FEC_1_2;
+
+ case 1:
+ return FEC_2_3;
+
+ case 2:
+ return FEC_3_4;
+
+ case 3:
+ return FEC_5_6;
+
+ case 4:
+ return FEC_6_7;
+
+ case 5:
+ return FEC_7_8;
+ }
+
+ return FEC_NONE;
+}
+
+static void s5h1420_setinversion(struct s5h1420_state* state, struct dvb_frontend_parameters *p)
+{
+ if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) {
+ s5h1420_writereg(state, 0x31, 0x00);
+ s5h1420_writereg(state, 0x30, 0x3f);
+ } else {
+ u8 tmp = s5h1420_readreg(state, 0x31) & 0xf7;
+ tmp |= 0x10;
+
+ if (p->inversion == INVERSION_ON)
+ tmp |= 0x80;
+
+ s5h1420_writereg(state, 0x31, tmp);
+ }
+}
+
+static fe_spectral_inversion_t s5h1420_getinversion(struct s5h1420_state* state)
+{
+ if (s5h1420_readreg(state, 0x32) & 0x08)
+ return INVERSION_ON;
+
+ return INVERSION_OFF;
+}
+
+static int s5h1420_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ u32 frequency_delta;
+ struct dvb_frontend_tune_settings fesettings;
+
+ /* check if we should do a fast-tune */
+ memcpy(&fesettings.parameters, p, sizeof(struct dvb_frontend_parameters));
+ s5h1420_get_tune_settings(fe, &fesettings);
+ frequency_delta = p->frequency - state->tunedfreq;
+ if ((frequency_delta > -fesettings.max_drift) && (frequency_delta < fesettings.max_drift) &&
+ (frequency_delta != 0) &&
+ (state->fec_inner == p->u.qpsk.fec_inner) &&
+ (state->symbol_rate == p->u.qpsk.symbol_rate)) {
+
+ s5h1420_setfreqoffset(state, frequency_delta);
+ return 0;
+ }
+
+ /* first of all, software reset */
+ s5h1420_reset(state);
+
+ /* set tuner PLL */
+ if (state->config->pll_set) {
+ s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1);
+ state->config->pll_set(fe, p, &state->tunedfreq);
+ s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe);
+ }
+
+ /* set s5h1420 fclk PLL according to desired symbol rate */
+ if (p->u.qpsk.symbol_rate > 28000000) {
+ state->fclk = 88000000;
+ s5h1420_writereg(state, 0x03, 0x50);
+ s5h1420_writereg(state, 0x04, 0x40);
+ s5h1420_writereg(state, 0x05, 0xae);
+ } else if (p->u.qpsk.symbol_rate > 21000000) {
+ state->fclk = 59000000;
+ s5h1420_writereg(state, 0x03, 0x33);
+ s5h1420_writereg(state, 0x04, 0x40);
+ s5h1420_writereg(state, 0x05, 0xae);
+ } else {
+ state->fclk = 88000000;
+ s5h1420_writereg(state, 0x03, 0x50);
+ s5h1420_writereg(state, 0x04, 0x40);
+ s5h1420_writereg(state, 0x05, 0xac);
+ }
+
+ /* set misc registers */
+ s5h1420_writereg(state, 0x02, 0x00);
+ s5h1420_writereg(state, 0x07, 0xb0);
+ s5h1420_writereg(state, 0x0a, 0x67);
+ s5h1420_writereg(state, 0x0b, 0x78);
+ s5h1420_writereg(state, 0x0c, 0x48);
+ s5h1420_writereg(state, 0x0d, 0x6b);
+ s5h1420_writereg(state, 0x2e, 0x8e);
+ s5h1420_writereg(state, 0x35, 0x33);
+ s5h1420_writereg(state, 0x38, 0x01);
+ s5h1420_writereg(state, 0x39, 0x7d);
+ s5h1420_writereg(state, 0x3a, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32));
+ s5h1420_writereg(state, 0x3c, 0x00);
+ s5h1420_writereg(state, 0x45, 0x61);
+ s5h1420_writereg(state, 0x46, 0x1d);
+
+ /* start QPSK */
+ s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) | 1);
+
+ /* set the frequency offset to adjust for PLL inaccuracy */
+ s5h1420_setfreqoffset(state, p->frequency - state->tunedfreq);
+
+ /* set the reset of the parameters */
+ s5h1420_setsymbolrate(state, p);
+ s5h1420_setinversion(state, p);
+ s5h1420_setfec(state, p);
+
+ state->fec_inner = p->u.qpsk.fec_inner;
+ state->symbol_rate = p->u.qpsk.symbol_rate;
+ state->postlocked = 0;
+ return 0;
+}
+
+static int s5h1420_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state);
+ p->inversion = s5h1420_getinversion(state);
+ p->u.qpsk.symbol_rate = s5h1420_getsymbolrate(state);
+ p->u.qpsk.fec_inner = s5h1420_getfec(state);
+
+ return 0;
+}
+
+static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
+{
+ if (fesettings->parameters.u.qpsk.symbol_rate > 20000000) {
+ fesettings->min_delay_ms = 50;
+ fesettings->step_size = 2000;
+ fesettings->max_drift = 8000;
+ } else if (fesettings->parameters.u.qpsk.symbol_rate > 12000000) {
+ fesettings->min_delay_ms = 100;
+ fesettings->step_size = 1500;
+ fesettings->max_drift = 9000;
+ } else if (fesettings->parameters.u.qpsk.symbol_rate > 8000000) {
+ fesettings->min_delay_ms = 100;
+ fesettings->step_size = 1000;
+ fesettings->max_drift = 8000;
+ } else if (fesettings->parameters.u.qpsk.symbol_rate > 4000000) {
+ fesettings->min_delay_ms = 100;
+ fesettings->step_size = 500;
+ fesettings->max_drift = 7000;
+ } else if (fesettings->parameters.u.qpsk.symbol_rate > 2000000) {
+ fesettings->min_delay_ms = 200;
+ fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000);
+ fesettings->max_drift = 14 * fesettings->step_size;
+ } else {
+ fesettings->min_delay_ms = 200;
+ fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000);
+ fesettings->max_drift = 18 * fesettings->step_size;
+ }
+
+ return 0;
+}
+
+static int s5h1420_init (struct dvb_frontend* fe)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ /* disable power down and do reset */
+ s5h1420_writereg(state, 0x02, 0x10);
+ msleep(10);
+ s5h1420_reset(state);
+
+ /* init PLL */
+ if (state->config->pll_init) {
+ s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1);
+ state->config->pll_init(fe);
+ s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe);
+ }
+
+ return 0;
+}
+
+static int s5h1420_sleep(struct dvb_frontend* fe)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+
+ return s5h1420_writereg(state, 0x02, 0x12);
+}
+
+static void s5h1420_release(struct dvb_frontend* fe)
+{
+ struct s5h1420_state* state = fe->demodulator_priv;
+ kfree(state);
+}
+
+static struct dvb_frontend_ops s5h1420_ops;
+
+struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, struct i2c_adapter* i2c)
+{
+ struct s5h1420_state* state = NULL;
+ u8 identity;
+
+ /* allocate memory for the internal state */
+ state = kmalloc(sizeof(struct s5h1420_state), GFP_KERNEL);
+ if (state == NULL)
+ goto error;
+
+ /* setup the state */
+ state->config = config;
+ state->i2c = i2c;
+ memcpy(&state->ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops));
+ state->postlocked = 0;
+ state->fclk = 88000000;
+ state->tunedfreq = 0;
+ state->fec_inner = FEC_NONE;
+ state->symbol_rate = 0;
+
+ /* check if the demod is there + identify it */
+ identity = s5h1420_readreg(state, 0x00);
+ if (identity != 0x03)
+ goto error;
+
+ /* create dvb_frontend */
+ state->frontend.ops = &state->ops;
+ state->frontend.demodulator_priv = state;
+ return &state->frontend;
+
+error:
+ kfree(state);
+ return NULL;
+}
+
+static struct dvb_frontend_ops s5h1420_ops = {
+
+ .info = {
+ .name = "Samsung S5H1420 DVB-S",
+ .type = FE_QPSK,
+ .frequency_min = 950000,
+ .frequency_max = 2150000,
+ .frequency_stepsize = 125, /* kHz for QPSK frontends */
+ .frequency_tolerance = 29500,
+ .symbol_rate_min = 1000000,
+ .symbol_rate_max = 45000000,
+ /* .symbol_rate_tolerance = ???,*/
+ .caps = FE_CAN_INVERSION_AUTO |
+ FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+ FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+ FE_CAN_QPSK
+ },
+
+ .release = s5h1420_release,
+
+ .init = s5h1420_init,
+ .sleep = s5h1420_sleep,
+
+ .set_frontend = s5h1420_set_frontend,
+ .get_frontend = s5h1420_get_frontend,
+ .get_tune_settings = s5h1420_get_tune_settings,
+
+ .read_status = s5h1420_read_status,
+ .read_ber = s5h1420_read_ber,
+ .read_signal_strength = s5h1420_read_signal_strength,
+ .read_ucblocks = s5h1420_read_ucblocks,
+
+ .diseqc_send_master_cmd = s5h1420_send_master_cmd,
+ .diseqc_recv_slave_reply = s5h1420_recv_slave_reply,
+ .diseqc_send_burst = s5h1420_send_burst,
+ .set_tone = s5h1420_set_tone,
+ .set_voltage = s5h1420_set_voltage,
+};
+
+module_param(debug, int, 0644);
+
+MODULE_DESCRIPTION("Samsung S5H1420 DVB-S Demodulator driver");
+MODULE_AUTHOR("Andrew de Quincey");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(s5h1420_attach);
projects / linux-2.6-omap-h63xx.git / commitdiff