- directory with info about Linux on Intel 32 bit architecture.
ia64/
- directory with info about Linux on Intel 64 bit architecture.
-ide.txt
- - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
infiniband/
- directory with documents concerning Linux InfiniBand support.
initrd.txt
---------------
0. The ide-cd relies on the ide disk driver. See
- Documentation/ide.txt for up-to-date information on the ide
+ Documentation/ide/ide.txt for up-to-date information on the ide
driver.
1. Make sure that the ide and ide-cd drivers are compiled into the
Depending on what type of IDE interface you have, you may need to
specify additional configuration options. See
- Documentation/ide.txt.
+ Documentation/ide/ide.txt.
2. You should also ensure that the iso9660 filesystem is either
compiled into the kernel or available as a loadable module. You
on the primary IDE interface are called `hda' and `hdb',
respectively. The drives on the secondary interface are called
`hdc' and `hdd'. (Interfaces at other locations get other letters
- in the third position; see Documentation/ide.txt.)
+ in the third position; see Documentation/ide/ide.txt.)
If you want your CDROM drive to be found automatically by the
driver, you should make sure your IDE interface uses either the
be jumpered as `master'. (If for some reason you cannot configure
your system in this manner, you can probably still use the driver.
You may have to pass extra configuration information to the kernel
- when you boot, however. See Documentation/ide.txt for more
+ when you boot, however. See Documentation/ide/ide.txt for more
information.)
4. Boot the system. If the drive is recognized, you should see a
This section discusses some common problems encountered when trying to
use the driver, and some possible solutions. Note that if you are
experiencing problems, you should probably also review
-Documentation/ide.txt for current information about the underlying
+Documentation/ide/ide.txt for current information about the underlying
IDE support code. Some of these items apply only to earlier versions
of the driver, but are mentioned here for completeness.
a. Drive is not detected during booting.
- Review the configuration instructions above and in
- Documentation/ide.txt, and check how your hardware is
+ Documentation/ide/ide.txt, and check how your hardware is
configured.
- If your drive is the only device on an IDE interface, it should
- If your IDE interface is not at the standard addresses of 0x170
or 0x1f0, you'll need to explicitly inform the driver using a
- lilo option. See Documentation/ide.txt. (This feature was
+ lilo option. See Documentation/ide/ide.txt. (This feature was
added around kernel version 1.3.30.)
- If the autoprobing is not finding your drive, you can tell the
Support for some interfaces needing extra initialization is
provided in later 1.3.x kernels. You may need to turn on
additional kernel configuration options to get them to work;
- see Documentation/ide.txt.
+ see Documentation/ide/ide.txt.
Even if support is not available for your interface, you may be
able to get it to work with the following procedure. First boot
be worked around by specifying the `serialize' option when
booting. Recent kernels should be able to detect the need for
this automatically in most cases, but the detection is not
- foolproof. See Documentation/ide.txt for more information
+ foolproof. See Documentation/ide/ide.txt for more information
about the `serialize' option and the CMD640B.
- Note that many MS-DOS CDROM drivers will work with such buggy
--- /dev/null
+00-INDEX
+ - this file
+ChangeLog.ide-cd.1994-2004
+ - ide-cd changelog
+ChangeLog.ide-floppy.1996-2002
+ - ide-floppy changelog
+ChangeLog.ide-tape.1995-2002
+ - ide-tape changelog
+ide-tape.txt
+ - info on the IDE ATAPI streaming tape driver
+ide.txt
+ - important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
==============================================================================
-
+
The hdparm utility can be used to control various IDE features on a
running system. It is packaged separately. Please Look for it on popular
linux FTP sites.
-
+
*** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
================================================================================
-This is the multiple IDE interface driver, as evolved from hd.c.
+This is the multiple IDE interface driver, as evolved from hd.c.
It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.
--------------------------------------------------------
"hdx=" is recognized for all "x" from "a" to "h", such as "hdc".
-
+
"idex=" is recognized for all "x" from "0" to "3", such as "ide1".
"hdx=noprobe" : drive may be present, but do not probe for it
-
+
"hdx=none" : drive is NOT present, ignore cmos and do not probe
-
+
"hdx=nowerr" : ignore the WRERR_STAT bit on this drive
-
+
"hdx=cdrom" : drive is present, and is a cdrom drive
-
+
"hdx=cyl,head,sect" : disk drive is present, with specified geometry
"hdx=remap" : remap access of sector 0 to sector 1 (for EZDrive)
"idex=base" : probe for an interface at the addr specified,
where "base" is usually 0x1f0 or 0x170
and "ctl" is assumed to be "base"+0x206
-
+
"idex=base,ctl" : specify both base and ctl
"idex=base,ctl,irq" : specify base, ctl, and irq number
to take effect.
"idex=four" : four drives on idex and ide(x^1) share same ports
-
+
"idex=reset" : reset interface after probe
"idex=ata66" : informs the interface that it has an 80c cable
Format: <cyl>,<head>,<sect>
hd?= [HW] (E)IDE subsystem
- hd?lun= See Documentation/ide.txt.
+ hd?lun= See Documentation/ide/ide.txt.
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
ide= [HW] (E)IDE subsystem
Format: ide=nodma or ide=doubler or ide=reverse
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
ide?= [HW] (E)IDE subsystem
Format: ide?=noprobe or chipset specific parameters.
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed
- See Documentation/ide.txt.
+ See Documentation/ide/ide.txt.
idle= [X86]
Format: idle=poll or idle=mwait
unsigned int i, len = 0;
for (i = 0; args[i]; i++) {
+ if (i) {
+ strcat(dst+len, " ");
+ len++;
+ }
strcpy(dst+len, args[i]);
- strcat(dst+len, " ");
- len += strlen(args[i]) + 1;
+ len += strlen(args[i]);
}
/* In case it's empty. */
dst[len] = '\0';
The ID table is an array of struct pci_device_id entries ending with an
-all-zero entry; use of the macro DECLARE_PCI_DEVICE_TABLE is the preferred
+all-zero entry; use of the macro DEFINE_PCI_DEVICE_TABLE is the preferred
method of declaring the table. Each entry consists of:
vendor,device Vendor and device ID to match (or PCI_ANY_ID)
o Do not mark the struct pci_driver.
o The ID table array should be marked __devinitconst; this is done
- automatically if the table is declared with DECLARE_PCI_DEVICE_TABLE().
+ automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
o The probe() and remove() functions should be marked __devinit
and __devexit respectively. All initialization functions
/proc/<pid>/schedstat
----------------
-schedstats also adds a new /proc/<pid/schedstat file to include some of
+schedstats also adds a new /proc/<pid>/schedstat file to include some of
the same information on a per-process level. There are three fields in
this file correlating for that process to:
1) time spent on the cpu
** 8.replace pci_alloc_consistent()/pci_free_consistent() with kmalloc()/kfree() in arcmsr_iop_message_xfer()
** 9. fix the release of dma memory for type B in arcmsr_free_ccb_pool()
** 10.fix the arcmsr_polling_hbb_ccbdone()
+** 1.20.00.15 02/27/2008 Erich Chen & Nick Cheng
+** 1.arcmsr_iop_message_xfer() is called from atomic context under the
+** queuecommand scsi_host_template handler. James Bottomley pointed out
+** that the current GFP_KERNEL|GFP_DMA flags are wrong: firstly we are in
+** atomic context, secondly this memory is not used for DMA.
+** Also removed some unneeded casts. Thanks to Daniel Drake <dsd@gentoo.org>
**************************************************************************
usb-help.txt
-2000-July-12
+2008-Mar-7
For USB help other than the readme files that are located in
Documentation/usb/*, see the following:
Linux USB Guide: http://linux-usb.sourceforge.net
Linux-USB device overview (working devices and drivers):
http://www.qbik.ch/usb/devices/
-
-The Linux-USB mailing lists are:
- linux-usb-users@lists.sourceforge.net for general user help
- linux-usb-devel@lists.sourceforge.net for developer discussions
+
+The Linux-USB mailing list is at linux-usb@vger.kernel.org
###
Trying to find an issue in the dentry cache? Try
- slub_debug=,dentry_cache
+ slub_debug=,dentry
to only enable debugging on the dentry cache.
Red zoning and tracking may realign the slab. We can just apply sanity checks
to the dentry cache with
- slub_debug=F,dentry_cache
+ slub_debug=F,dentry
In case you forgot to enable debugging on the kernel command line: It is
possible to enable debugging manually when the kernel is up. Look at the
L: netdev@vger.kernel.org
S: Maintained
-INTEL PRO/100 ETHERNET SUPPORT
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
P: Auke Kok
M: auke-jan.h.kok@intel.com
P: Jesse Brandeburg
M: jesse.brandeburg@intel.com
P: Jeff Kirsher
M: jeffrey.t.kirsher@intel.com
+P: Bruce Allan
+M: bruce.w.allan@intel.com
P: John Ronciak
M: john.ronciak@intel.com
L: e1000-devel@lists.sourceforge.net
-W: http://sourceforge.net/projects/e1000/
-S: Supported
-
-INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
-P: Auke Kok
-M: auke-jan.h.kok@intel.com
-P: Jesse Brandeburg
-M: jesse.brandeburg@intel.com
-P: Jeff Kirsher
-M: jeffrey.t.kirsher@intel.com
-P: John Ronciak
-M: john.ronciak@intel.com
-L: e1000-devel@lists.sourceforge.net
-W: http://sourceforge.net/projects/e1000/
-S: Supported
-
-INTEL PRO/10GbE SUPPORT
-P: Ayyappan Veeraiyan
-M: ayyappan.veeraiyan@intel.com
-P: Auke Kok
-M: auke-jan.h.kok@intel.com
-P: Jesse Brandeburg
-M: jesse.brandeburg@intel.com
-P: John Ronciak
-M: john.ronciak@intel.com
-L: e1000-devel@lists.sourceforge.net
-W: http://sourceforge.net/projects/e1000/
+W: http://e1000.sourceforge.net/
S: Supported
INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
S: Maintained
IPATH DRIVER:
-P: Arthur Jones
+P: Ralph Campbell
M: infinipath@qlogic.com
L: general@lists.openfabrics.org
T: git git://git.qlogic.com/ipath-linux-2.6
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
unsigned long base;
unsigned long boundary_size;
- BUG_ON(arena->dma_base & ~PAGE_MASK);
base = arena->dma_base >> PAGE_SHIFT;
- if (dev)
- boundary_size = ALIGN(dma_get_max_seg_size(dev) + 1, PAGE_SIZE)
- >> PAGE_SHIFT;
- else
- boundary_size = ALIGN(1UL << 32, PAGE_SIZE) >> PAGE_SHIFT;
-
- BUG_ON(!is_power_of_2(boundary_size));
+ if (dev) {
+ boundary_size = dma_get_seg_boundary(dev) + 1;
+ BUG_ON(!is_power_of_2(boundary_size));
+ boundary_size >>= PAGE_SHIFT;
+ } else {
+ boundary_size = 1UL << (32 - PAGE_SHIFT);
+ }
/* Search forward for the first mask-aligned sequence of N free ptes */
ptes = arena->ptes;
.align 16
/*
- * Atomic ior, 32 bit.
+ * Atomic and, 32 bit.
* Inputs: P0: memory address to use
- * R0: value to ior
+ * R0: value to and
* Outputs: R0: new contents of the memory address.
* R1: previous contents of the memory address.
*/
R0 = R1 & R0;
[P0] = R0;
rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_and32)
.align 16
/*
- * Atomic ior, 32 bit.
+ * Atomic xor, 32 bit.
* Inputs: P0: memory address to use
- * R0: value to ior
+ * R0: value to xor
* Outputs: R0: new contents of the memory address.
* R1: previous contents of the memory address.
*/
R0 = R1 ^ R0;
[P0] = R0;
rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_xor32)
.align 16
/*
};
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
static struct platform_device bf54x_sdh_device = {
.name = "bfin-sdh",
.id = 0,
&bf5xx_nand_device,
#endif
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
&bf54x_sdh_device,
#endif
.long _sys_epoll_pwait
.long _sys_utimensat
.long _sys_signalfd
- .long _sys_ni_syscall
+ .long _sys_timerfd_create
.long _sys_eventfd /* 350 */
.long _sys_pread64
.long _sys_pwrite64
.long _sys_get_robust_list /* 355 */
.long _sys_fallocate
.long _sys_semtimedop
+ .long _sys_timerfd_settime
+ .long _sys_timerfd_gettime
+
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
.endr
#ifdef CONFIG_IA64_GENERIC
/* Better to have normal DMA than panic */
printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
- " reverting to hpzx1 platform vector\n", __FUNCTION__);
+ " reverting to hpzx1 platform vector\n", __func__);
machvec_init("hpzx1");
#else
panic("Unable to initialize software I/O TLB services");
base_mask = RESMAP_MASK(bits_wanted);
mask = base_mask << bitshiftcnt;
- DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+ DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
for(; res_ptr < res_end ; res_ptr++)
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
#endif
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
- __FUNCTION__, size, pages_needed, pide,
+ __func__, size, pages_needed, pide,
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
ioc->res_bitshift );
m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
bits_not_wanted = 0;
- DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __FUNCTION__, (uint) iova, size,
- bits_not_wanted, m, pide, res_ptr, *res_ptr);
+ DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size,
+ bits_not_wanted, m, pide, res_ptr, *res_ptr);
ASSERT(m != 0);
ASSERT(bits_not_wanted);
iovp = (dma_addr_t) pide << iovp_shift;
- DBG_RUN("%s() 0x%p -> 0x%lx\n",
- __FUNCTION__, addr, (long) iovp | offset);
+ DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset);
pdir_start = &(ioc->pdir_base[pide]);
#endif
offset = iova & ~iovp_mask;
- DBG_RUN("%s() iovp 0x%lx/%x\n",
- __FUNCTION__, (long) iova, size);
+ DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
iova ^= offset; /* clear offset bits */
size += offset;
struct scatterlist *sg;
#endif
- DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
ioc = GET_IOC(dev);
ASSERT(ioc);
#endif
ASSERT(coalesced == filled);
- DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+ DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
return filled;
}
#endif
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
- __FUNCTION__, nents, sba_sg_address(sglist), sglist->length);
+ __func__, nents, sba_sg_address(sglist), sglist->length);
#ifdef ASSERT_PDIR_SANITY
ioc = GET_IOC(dev);
nents--;
}
- DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->iov_size = ~ioc->imask + 1;
DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
- __FUNCTION__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
+ __func__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
ioc->iov_size >> 20);
switch (iovp_size) {
memset(ioc->pdir_base, 0, ioc->pdir_size);
- DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __FUNCTION__,
+ DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__,
iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
prefetch_spill_page = virt_to_phys(addr);
- DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __FUNCTION__, prefetch_spill_page);
+ DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page);
}
/*
** Set all the PDIR entries valid w/ the spill page as the target
/* resource map size dictated by pdir_size */
ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
ioc->res_size >>= 3; /* convert bit count to byte count */
- DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+ DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
| prefetch_spill_page);
#endif
- DBG_INIT("%s() res_map %x %p\n", __FUNCTION__,
+ DBG_INIT("%s() res_map %x %p\n", __func__,
ioc->res_size, (void *) ioc->res_map);
}
iovp_size = (1 << iovp_shift);
iovp_mask = ~(iovp_size - 1);
- DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
+ DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__,
PAGE_SIZE >> 10, iovp_size >> 10);
if (!ioc->name) {
break;
default:
printk("%s: unknown/unsupported iommu page size %ld\n",
- __FUNCTION__, page_size);
+ __func__, page_size);
}
return 1;
}
if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
dev->irq = rc;
/*
if (!state->irq) {
if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
panic("%s: out of interrupt vectors!\n",
- __FUNCTION__);
+ __func__);
state->irq = rc;
ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
}
#include <linux/shm.h>
#include <linux/slab.h>
#include <linux/uio.h>
-#include <linux/nfs_fs.h>
+#include <linux/socket.h>
#include <linux/quota.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
#include <linux/poll.h>
#include <linux/eventpoll.h>
#include <linux/personality.h>
if (val == DIE_INIT_MONARCH_LEAVE)
ia64_mca_printk(KERN_NOTICE
"%s: kdump not configured\n",
- __FUNCTION__);
+ __func__);
return NOTIFY_DONE;
}
* a dedicated ITR for the PAL code.
*/
if ((vaddr & mask) == (KERNEL_START & mask)) {
- printk(KERN_INFO "%s: no need to install ITR for "
- "PAL code\n", __FUNCTION__);
+ printk(KERN_INFO "%s: no need to install ITR for PAL code\n",
+ __func__);
continue;
}
return __va(md->phys_addr);
}
printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n",
- __FUNCTION__);
+ __func__);
return NULL;
}
for (i = 0, p = efi_map_start; p < efi_map_end;
++i, p += efi_desc_size)
{
+ const char *unit;
+ unsigned long size;
+
md = p;
- printk("mem%02u: type=%u, attr=0x%lx, "
- "range=[0x%016lx-0x%016lx) (%luMB)\n",
+ size = md->num_pages << EFI_PAGE_SHIFT;
+
+ if ((size >> 40) > 0) {
+ size >>= 40;
+ unit = "TB";
+ } else if ((size >> 30) > 0) {
+ size >>= 30;
+ unit = "GB";
+ } else if ((size >> 20) > 0) {
+ size >>= 20;
+ unit = "MB";
+ } else {
+ size >>= 10;
+ unit = "KB";
+ }
+
+ printk("mem%02d: type=%2u, attr=0x%016lx, "
+ "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
i, md->type, md->attribute, md->phys_addr,
- md->phys_addr + efi_md_size(md),
- md->num_pages >> (20 - EFI_PAGE_SHIFT));
+ md->phys_addr + efi_md_size(md), size, unit);
}
}
#endif
if (iosapic_intr_info[irq].count) {
new_irq = create_irq();
if (new_irq < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
printk(KERN_INFO "Reassigning vector %d to %d\n",
irq_to_vector(irq), irq_to_vector(new_irq));
memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq],
index = find_iosapic(gsi);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
- __FUNCTION__, gsi);
+ __func__, gsi);
return -ENODEV;
}
rte = iosapic_alloc_rte();
if (!rte) {
printk(KERN_WARNING "%s: cannot allocate memory\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
(info->trigger != trigger || info->polarity != polarity)){
printk (KERN_WARNING
"%s: cannot override the interrupt\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
rte->refcnt++;
if (idesc->chip != &no_irq_type)
printk(KERN_WARNING
"%s: changing vector %d from %s to %s\n",
- __FUNCTION__, irq_to_vector(irq),
+ __func__, irq_to_vector(irq),
idesc->chip->name, irq_type->name);
idesc->chip = irq_type;
}
case ACPI_INTERRUPT_INIT:
irq = create_irq();
if (irq < 0)
- panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+ panic("%s: out of interrupt vectors!\n", __func__);
vector = irq_to_vector(irq);
delivery = IOSAPIC_INIT;
break;
mask = 1;
break;
default:
- printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+ printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__,
int_type);
return -1;
}
*/
printk(KERN_INFO
"%s: Disabling PC-AT compatible 8259 interrupts\n",
- __FUNCTION__);
+ __func__);
outb(0xff, 0xA1);
outb(0xff, 0x21);
}
if (!iosapic_lists[index].addr)
return index;
- printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__);
return -1;
}
index = find_iosapic(gsi_base);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
goto out;
}
if (iosapic_lists[index].rtes_inuse) {
err = -EBUSY;
printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
goto out;
}
index = find_iosapic(gsi_base);
if (index < 0) {
printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
- __FUNCTION__, gsi_base);
+ __func__, gsi_base);
return;
}
iosapic_lists[index].node = node;
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d is not mapped "
- "to any IRQ!\n", __FUNCTION__, vector,
+ "to any IRQ!\n", __func__, vector,
smp_processor_id());
} else
generic_handle_irq(irq);
if (unlikely(irq < 0)) {
printk(KERN_ERR "%s: Unexpected interrupt "
"vector %d on CPU %d not being mapped "
- "to any IRQ!!\n", __FUNCTION__, vector,
+ "to any IRQ!!\n", __func__, vector,
smp_processor_id());
} else {
vectors_in_migration[irq]=0;
unsigned long ipi_data;
unsigned long phys_cpu_id;
-#ifdef CONFIG_SMP
phys_cpu_id = cpu_physical_id(cpu);
-#else
- phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
-#endif
/*
* cpu number is in 8bit ID and 8bit EID
return 1;
}
-int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
struct kprobe *cur = kprobe_running();
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
IA64_LOG_INDEX_INC(sal_info_type);
IA64_LOG_UNLOCK(sal_info_type);
if (irq_safe) {
- IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. "
- "Record length = %ld\n", __FUNCTION__, sal_info_type, total_len);
+ IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. Record length = %ld\n",
+ __func__, sal_info_type, total_len);
}
*buffer = (u8 *) log_buffer;
return total_len;
static DEFINE_SPINLOCK(cpe_history_lock);
IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
- __FUNCTION__, cpe_irq, smp_processor_id());
+ __func__, cpe_irq, smp_processor_id());
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
}
IA64_MCA_DEBUG("%s: corrected platform error "
- "vector %#x registered\n", __FUNCTION__, cpev);
+ "vector %#x registered\n", __func__, cpev);
}
#endif /* CONFIG_ACPI */
cmcv.cmcv_vector = IA64_CMC_VECTOR;
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x registered.\n",
- __FUNCTION__, smp_processor_id(), IA64_CMC_VECTOR);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x registered.\n",
+ __func__, smp_processor_id(), IA64_CMC_VECTOR);
IA64_MCA_DEBUG("%s: CPU %d CMCV = %#016lx\n",
- __FUNCTION__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
+ __func__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
}
/*
cmcv.cmcv_mask = 1; /* Mask/disable interrupt */
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x disabled.\n",
- __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x disabled.\n",
+ __func__, smp_processor_id(), cmcv.cmcv_vector);
}
/*
cmcv.cmcv_mask = 0; /* Unmask/enable interrupt */
ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
- IA64_MCA_DEBUG("%s: CPU %d corrected "
- "machine check vector %#x enabled.\n",
- __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+ IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x enabled.\n",
+ __func__, smp_processor_id(), cmcv.cmcv_vector);
}
/*
local_irq_save(flags);
if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE;
/* Register with the SAL monarch that the slave has
if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
/* Wait for the monarch cpu to exit. */
while (monarch_cpu != -1)
if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", get_irq_regs(),
(long)&nd, 0, 0) == NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
/* Enable all interrupts */
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
if (sos->monarch) {
ia64_mca_wakeup_all();
if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
} else {
while (cpu_isset(cpu, mca_cpu))
cpu_relax(); /* spin until monarch wakes us */
}
if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (atomic_dec_return(&mca_count) > 0) {
static DEFINE_SPINLOCK(cmc_history_lock);
IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
- __FUNCTION__, cmc_irq, smp_processor_id());
+ __func__, cmc_irq, smp_processor_id());
/* SAL spec states this should run w/ interrupts enabled */
local_irq_enable();
*/
if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
- __FUNCTION__, cpu);
+ __func__, cpu);
atomic_dec(&slaves);
sos->monarch = 1;
}
*/
if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
- __FUNCTION__, cpu);
+ __func__, cpu);
atomic_dec(&monarchs);
sos->monarch = 0;
}
cpu_relax(); /* spin until monarch enters */
if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
while (monarch_cpu != -1)
cpu_relax(); /* spin until monarch leaves */
if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
mprintk("Slave on cpu %d returning to normal service.\n", cpu);
set_curr_task(cpu, previous_current);
ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
monarch_cpu = cpu;
if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
/*
* Wait for a bit. On some machines (e.g., HP's zx2000 and zx6000, INIT can be
*/
if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
- ia64_mca_spin(__FUNCTION__);
+ ia64_mca_spin(__func__);
mprintk("\nINIT dump complete. Monarch on cpu %d returning to normal service.\n", cpu);
atomic_dec(&monarchs);
set_curr_task(cpu, previous_current);
.priority = 0/* we need to notified last */
};
- IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: begin\n", __func__);
/* Clear the Rendez checkin flag for all cpus */
for(i = 0 ; i < NR_CPUS; i++)
return;
}
- IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __func__);
ia64_mc_info.imi_mca_handler = ia64_tpa(mca_hldlr_ptr->fp);
/*
return;
}
- IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __FUNCTION__,
+ IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __func__,
ia64_mc_info.imi_mca_handler, ia64_tpa(mca_hldlr_ptr->gp));
/*
ia64_mc_info.imi_slave_init_handler = ia64_tpa(init_hldlr_ptr_slave->fp);
ia64_mc_info.imi_slave_init_handler_size = 0;
- IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__,
+ IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __func__,
ia64_mc_info.imi_monarch_init_handler);
/* Register the os init handler with SAL */
return;
}
- IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __func__);
/*
* Configure the CMCI/P vector and handler. Interrupts for CMC are
cmc_polling_enabled = 0;
schedule_work(&cmc_enable_work);
- IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
#ifdef CONFIG_ACPI
/* Setup the CPEI/P vector and handler */
ia64_cpe_irq = irq;
ia64_mca_register_cpev(cpe_vector);
IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n",
- __FUNCTION__);
+ __func__);
return 0;
}
printk(KERN_ERR "%s: Failed to find irq for CPE "
"interrupt handler, vector %d\n",
- __FUNCTION__, cpe_vector);
+ __func__, cpe_vector);
}
/* If platform doesn't support CPEI, get the timer going. */
if (cpe_poll_enabled) {
ia64_mca_cpe_poll(0UL);
- IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
+ IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __func__);
}
}
#endif
mod->arch.opd->sh_addralign = 8;
mod->arch.opd->sh_size = fdescs * sizeof(struct fdesc);
DEBUGP("%s: core.plt=%lx, init.plt=%lx, got=%lx, fdesc=%lx\n",
- __FUNCTION__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
+ __func__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
mod->arch.got->sh_size, mod->arch.opd->sh_size);
return 0;
}
#if ARCH_MODULE_DEBUG
if (plt_target(plt) != target_ip) {
printk("%s: mistargeted PLT: wanted %lx, got %lx\n",
- __FUNCTION__, target_ip, plt_target(plt));
+ __func__, target_ip, plt_target(plt));
*okp = 0;
return 0;
}
if (r_type == R_IA64_PCREL21BI) {
if (!is_internal(mod, val)) {
printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n",
- __FUNCTION__, reloc_name[r_type], val);
+ __func__, reloc_name[r_type], val);
return -ENOEXEC;
}
format = RF_INSN21B;
case R_IA64_LDXMOV:
if (gp_addressable(mod, val)) {
/* turn "ld8" into "mov": */
- DEBUGP("%s: patching ld8 at %p to mov\n", __FUNCTION__, location);
+ DEBUGP("%s: patching ld8 at %p to mov\n", __func__, location);
ia64_patch((u64) location, 0x1fff80fe000UL, 0x10000000000UL);
}
return 0;
if (!ok)
return -ENOEXEC;
- DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __FUNCTION__, location, val,
+ DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __func__, location, val,
reloc_name[r_type] ? reloc_name[r_type] : "?", sym->st_value + addend);
switch (format) {
Elf64_Shdr *target_sec;
int ret;
- DEBUGP("%s: applying section %u (%u relocs) to %u\n", __FUNCTION__,
+ DEBUGP("%s: applying section %u (%u relocs) to %u\n", __func__,
relsec, n, sechdrs[relsec].sh_info);
target_sec = sechdrs + sechdrs[relsec].sh_info;
gp = mod->core_size / 2;
gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
mod->arch.gp = gp;
- DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
+ DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
}
for (i = 0; i < n; i++) {
init = start + num_core;
}
- DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __FUNCTION__,
+ DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __func__,
mod->name, mod->arch.gp, num_init, num_core);
/*
if (num_core > 0) {
mod->arch.core_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
core, core + num_core);
- DEBUGP("%s: core: handle=%p [%p-%p)\n", __FUNCTION__,
+ DEBUGP("%s: core: handle=%p [%p-%p)\n", __func__,
mod->arch.core_unw_table, core, core + num_core);
}
if (num_init > 0) {
mod->arch.init_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
init, init + num_init);
- DEBUGP("%s: init: handle=%p [%p-%p)\n", __FUNCTION__,
+ DEBUGP("%s: init: handle=%p [%p-%p)\n", __func__,
mod->arch.init_unw_table, init, init + num_init);
}
}
int
module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
{
- DEBUGP("%s: init: entry=%p\n", __FUNCTION__, mod->init);
+ DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
if (mod->arch.unwind)
register_unwind_table(mod);
return 0;
#ifdef PFM_DEBUGGING
#define DPRINT(a) \
do { \
- if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+ if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
} while (0)
#define DPRINT_ovfl(a) \
do { \
- if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+ if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
} while (0)
#endif
#ifdef DEFAULT_DEBUG
#define DPRINT(a) \
do { \
- if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+ if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
} while (0)
#define DPRINT_ovfl(a) \
do { \
- if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+ if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
} while (0)
#else
return 1; /* looks like we've got a winner */
}
-/*
- * GDB apparently wants to be able to read the register-backing store
- * of any thread when attached to a given process. If we are peeking
- * or poking an address that happens to reside in the kernel-backing
- * store of another thread, we need to attach to that thread, because
- * otherwise we end up accessing stale data.
- *
- * task_list_lock must be read-locked before calling this routine!
- */
-static struct task_struct *
-find_thread_for_addr (struct task_struct *child, unsigned long addr)
-{
- struct task_struct *p;
- struct mm_struct *mm;
- struct list_head *this, *next;
- int mm_users;
-
- if (!(mm = get_task_mm(child)))
- return child;
-
- /* -1 because of our get_task_mm(): */
- mm_users = atomic_read(&mm->mm_users) - 1;
- if (mm_users <= 1)
- goto out; /* not multi-threaded */
-
- /*
- * Traverse the current process' children list. Every task that
- * one attaches to becomes a child. And it is only attached children
- * of the debugger that are of interest (ptrace_check_attach checks
- * for this).
- */
- list_for_each_safe(this, next, ¤t->children) {
- p = list_entry(this, struct task_struct, sibling);
- if (p->tgid != child->tgid)
- continue;
- if (thread_matches(p, addr)) {
- child = p;
- goto out;
- }
- }
-
- out:
- mmput(mm);
- return child;
-}
-
/*
* Write f32-f127 back to task->thread.fph if it has been modified.
*/
if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
< IA64_PT_REGS_SIZE) {
dprintk("ptrace.%s: ran off the top of the kernel "
- "stack\n", __FUNCTION__);
+ "stack\n", __func__);
return;
}
if (unw_get_pr (&prev_info, &pr) < 0) {
unw_get_rp(&prev_info, &ip);
dprintk("ptrace.%s: failed to read "
"predicate register (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return;
}
if (unw_is_intr_frame(&info)
access_uarea (struct task_struct *child, unsigned long addr,
unsigned long *data, int write_access)
{
- unsigned long *ptr, regnum, urbs_end, rnat_addr, cfm;
+ unsigned long *ptr, regnum, urbs_end, cfm;
struct switch_stack *sw;
struct pt_regs *pt;
# define pt_reg_addr(pt, reg) ((void *) \
* the kernel was entered.
*
* Furthermore, when changing the contents of
- * PT_AR_BSP (or PT_CFM) we MUST copy any
- * users-level stacked registers that are
- * stored on the kernel stack back to
- * user-space because otherwise, we might end
- * up clobbering kernel stacked registers.
- * Also, if this happens while the task is
- * blocked in a system call, which convert the
- * state such that the non-system-call exit
+ * PT_AR_BSP (or PT_CFM) while the task is
+ * blocked in a system call, convert the state
+ * so that the non-system-call exit
* path is used. This ensures that the proper
* state will be picked up when resuming
* execution. However, it *also* means that
urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
if (write_access) {
if (*data != urbs_end) {
- if (ia64_sync_user_rbs(child, sw,
- pt->ar_bspstore,
- urbs_end) < 0)
- return -1;
if (in_syscall(pt))
convert_to_non_syscall(child,
pt,
urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
if (write_access) {
if (((cfm ^ *data) & PFM_MASK) != 0) {
- if (ia64_sync_user_rbs(child, sw,
- pt->ar_bspstore,
- urbs_end) < 0)
- return -1;
if (in_syscall(pt))
convert_to_non_syscall(child,
pt,
return 0;
case PT_AR_RNAT:
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- rnat_addr = (long) ia64_rse_rnat_addr((long *)
- urbs_end);
- if (write_access)
- return ia64_poke(child, sw, urbs_end,
- rnat_addr, *data);
- else
- return ia64_peek(child, sw, urbs_end,
- rnat_addr, data);
-
+ ptr = pt_reg_addr(pt, ar_rnat);
+ break;
case PT_R1:
ptr = pt_reg_addr(pt, r1);
break;
return ret;
}
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
void
-ptrace_disable (struct task_struct *child)
+user_enable_single_step (struct task_struct *child)
{
struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- /* make sure the single step/taken-branch trap bits are not set: */
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
- child_psr->ss = 0;
- child_psr->tb = 0;
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->ss = 1;
}
-asmlinkage long
-sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data)
+void
+user_enable_block_step (struct task_struct *child)
{
- struct pt_regs *pt;
- unsigned long urbs_end, peek_or_poke;
- struct task_struct *child;
- struct switch_stack *sw;
- long ret;
- struct unw_frame_info info;
+ struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- lock_kernel();
- ret = -EPERM;
- if (request == PTRACE_TRACEME) {
- ret = ptrace_traceme();
- goto out;
- }
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->tb = 1;
+}
- peek_or_poke = (request == PTRACE_PEEKTEXT
- || request == PTRACE_PEEKDATA
- || request == PTRACE_POKETEXT
- || request == PTRACE_POKEDATA);
- ret = -ESRCH;
- read_lock(&tasklist_lock);
- {
- child = find_task_by_pid(pid);
- if (child) {
- if (peek_or_poke)
- child = find_thread_for_addr(child, addr);
- get_task_struct(child);
- }
- }
- read_unlock(&tasklist_lock);
- if (!child)
- goto out;
- ret = -EPERM;
- if (pid == 1) /* no messing around with init! */
- goto out_tsk;
-
- if (request == PTRACE_ATTACH) {
- ret = ptrace_attach(child);
- if (!ret)
- arch_ptrace_attach(child);
- goto out_tsk;
- }
+void
+user_disable_single_step (struct task_struct *child)
+{
+ struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
- if (ret < 0)
- goto out_tsk;
+ /* make sure the single step/taken-branch trap bits are not set: */
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+ child_psr->ss = 0;
+ child_psr->tb = 0;
+}
- pt = task_pt_regs(child);
- sw = (struct switch_stack *) (child->thread.ksp + 16);
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable (struct task_struct *child)
+{
+ user_disable_single_step(child);
+}
+long
+arch_ptrace (struct task_struct *child, long request, long addr, long data)
+{
switch (request) {
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA:
+ case PTRACE_PEEKTEXT:
+ case PTRACE_PEEKDATA:
/* read word at location addr */
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- ret = ia64_peek(child, sw, urbs_end, addr, &data);
- if (ret == 0) {
- ret = data;
- /* ensure "ret" is not mistaken as an error code: */
- force_successful_syscall_return();
- }
- goto out_tsk;
-
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- /* write the word at location addr */
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- ret = ia64_poke(child, sw, urbs_end, addr, data);
-
- /* Make sure user RBS has the latest data */
- unw_init_from_blocked_task(&info, child);
- do_sync_rbs(&info, ia64_sync_user_rbs);
+ if (access_process_vm(child, addr, &data, sizeof(data), 0)
+ != sizeof(data))
+ return -EIO;
+ /* ensure return value is not mistaken for error code */
+ force_successful_syscall_return();
+ return data;
- goto out_tsk;
+ /* PTRACE_POKETEXT and PTRACE_POKEDATA is handled
+ * by the generic ptrace_request().
+ */
- case PTRACE_PEEKUSR:
+ case PTRACE_PEEKUSR:
/* read the word at addr in the USER area */
- if (access_uarea(child, addr, &data, 0) < 0) {
- ret = -EIO;
- goto out_tsk;
- }
- ret = data;
- /* ensure "ret" is not mistaken as an error code */
+ if (access_uarea(child, addr, &data, 0) < 0)
+ return -EIO;
+ /* ensure return value is not mistaken for error code */
force_successful_syscall_return();
- goto out_tsk;
+ return data;
- case PTRACE_POKEUSR:
+ case PTRACE_POKEUSR:
/* write the word at addr in the USER area */
- if (access_uarea(child, addr, &data, 1) < 0) {
- ret = -EIO;
- goto out_tsk;
- }
- ret = 0;
- goto out_tsk;
+ if (access_uarea(child, addr, &data, 1) < 0)
+ return -EIO;
+ return 0;
- case PTRACE_OLD_GETSIGINFO:
+ case PTRACE_OLD_GETSIGINFO:
/* for backwards-compatibility */
- ret = ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
- goto out_tsk;
+ return ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
- case PTRACE_OLD_SETSIGINFO:
+ case PTRACE_OLD_SETSIGINFO:
/* for backwards-compatibility */
- ret = ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
- goto out_tsk;
-
- case PTRACE_SYSCALL:
- /* continue and stop at next (return from) syscall */
- case PTRACE_CONT:
- /* restart after signal. */
- ret = -EIO;
- if (!valid_signal(data))
- goto out_tsk;
- if (request == PTRACE_SYSCALL)
- set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- else
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- child->exit_code = data;
+ return ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
- /*
- * Make sure the single step/taken-branch trap bits
- * are not set:
- */
- clear_tsk_thread_flag(child, TIF_SINGLESTEP);
- ia64_psr(pt)->ss = 0;
- ia64_psr(pt)->tb = 0;
+ case PTRACE_GETREGS:
+ return ptrace_getregs(child,
+ (struct pt_all_user_regs __user *) data);
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
+ case PTRACE_SETREGS:
+ return ptrace_setregs(child,
+ (struct pt_all_user_regs __user *) data);
- case PTRACE_KILL:
- /*
- * Make the child exit. Best I can do is send it a
- * sigkill. Perhaps it should be put in the status
- * that it wants to exit.
- */
- if (child->exit_state == EXIT_ZOMBIE)
- /* already dead */
- goto out_tsk;
- child->exit_code = SIGKILL;
-
- ptrace_disable(child);
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
-
- case PTRACE_SINGLESTEP:
- /* let child execute for one instruction */
- case PTRACE_SINGLEBLOCK:
- ret = -EIO;
- if (!valid_signal(data))
- goto out_tsk;
-
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- set_tsk_thread_flag(child, TIF_SINGLESTEP);
- if (request == PTRACE_SINGLESTEP) {
- ia64_psr(pt)->ss = 1;
- } else {
- ia64_psr(pt)->tb = 1;
- }
- child->exit_code = data;
-
- /* give it a chance to run. */
- wake_up_process(child);
- ret = 0;
- goto out_tsk;
-
- case PTRACE_DETACH:
- /* detach a process that was attached. */
- ret = ptrace_detach(child, data);
- goto out_tsk;
-
- case PTRACE_GETREGS:
- ret = ptrace_getregs(child,
- (struct pt_all_user_regs __user *) data);
- goto out_tsk;
-
- case PTRACE_SETREGS:
- ret = ptrace_setregs(child,
- (struct pt_all_user_regs __user *) data);
- goto out_tsk;
-
- default:
- ret = ptrace_request(child, request, addr, data);
- goto out_tsk;
+ default:
+ return ptrace_request(child, request, addr, data);
}
- out_tsk:
- put_task_struct(child);
- out:
- unlock_kernel();
- return ret;
}
if (overflow++ == 0)
printk(KERN_ERR
"%s: Table overflow. Some processor model information will be missing\n",
- __FUNCTION__);
+ __func__);
return "Unknown";
}
status = ia64_pal_cache_summary(&levels, &unique_caches);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
- __FUNCTION__, status);
+ __func__, status);
max = SMP_CACHE_BYTES;
/* Safest setup for "flush_icache_range()" */
ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
- __FUNCTION__, l, status);
+ __func__, l, status);
max = SMP_CACHE_BYTES;
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
if (status != 0) {
printk(KERN_ERR
"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
- __FUNCTION__, l, status);
+ __func__, l, status);
/* The safest setup for "flush_icache_range()" */
cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
}
#undef DEBUG_UNALIGNED_TRAP
#ifdef DEBUG_UNALIGNED_TRAP
-# define DPRINT(a...) do { printk("%s %u: ", __FUNCTION__, __LINE__); printk (a); } while (0)
+# define DPRINT(a...) do { printk("%s %u: ", __func__, __LINE__); printk (a); } while (0)
# define DDUMP(str,vp,len) dump(str, vp, len)
static void
* just in case.
*/
if (ld.x6_op == 1 || ld.x6_op == 3) {
- printk(KERN_ERR "%s: register update on speculative load, error\n", __FUNCTION__);
+ printk(KERN_ERR "%s: register update on speculative load, error\n", __func__);
if (die_if_kernel("unaligned reference on speculative load with register update\n",
regs, 30))
return;
*/
if (ld.x6_op == 1 || ld.x6_op == 3)
printk(KERN_ERR "%s: register update on speculative load pair, error\n",
- __FUNCTION__);
+ __func__);
setreg(ld.r3, ifa, 0, regs);
}
off = unw.pt_regs_offsets[reg];
if (off < 0) {
- UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __FUNCTION__, reg);
+ UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __func__, reg);
off = 0;
}
return (unsigned long) off;
{
if (!info->pt) {
/* This should not happen with valid unwind info. */
- UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __func__);
if (info->flags & UNW_FLAG_INTERRUPT_FRAME)
info->pt = (unsigned long) ((struct pt_regs *) info->psp - 1);
else
info->pt = info->sp - 16;
}
- UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __FUNCTION__, info->sp, info->pt);
+ UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __func__, info->sp, info->pt);
return (struct pt_regs *) info->pt;
}
return 0;
}
UNW_DPRINT(0, "unwind.%s: trying to access non-existent r%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
{
UNW_DPRINT(0, "unwind.%s: %p outside of regstk "
"[0x%lx-0x%lx)\n",
- __FUNCTION__, (void *) addr,
+ __func__, (void *) addr,
info->regstk.limit,
info->regstk.top);
return -1;
|| (unsigned long) addr >= info->regstk.top)
{
UNW_DPRINT(0, "unwind.%s: ignoring attempt to access register outside "
- "of rbs\n", __FUNCTION__);
+ "of rbs\n", __func__);
return -1;
}
if ((unsigned long) nat_addr >= info->regstk.top)
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else {
*addr = *val;
if (*nat)
default:
UNW_DPRINT(0, "unwind.%s: trying to access non-existent b%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write)
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
else
if ((unsigned) (regnum - 2) >= 126) {
UNW_DPRINT(0, "unwind.%s: trying to access non-existent f%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write)
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
else
default:
UNW_DPRINT(0, "unwind.%s: trying to access non-existent ar%u\n",
- __FUNCTION__, regnum);
+ __func__, regnum);
return -1;
}
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
} else
if (write) {
if (read_only(addr)) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
- __FUNCTION__);
+ __func__);
} else
*addr = *val;
} else
default:
break;
}
- UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __FUNCTION__, abreg);
+ UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __func__, abreg);
return UNW_REG_LC;
}
return;
}
}
- UNW_DPRINT(0, "unwind.%s: excess spill!\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: excess spill!\n", __func__);
}
static inline void
{
if (abi == 3 && context == 'i') {
sr->flags |= UNW_FLAG_INTERRUPT_FRAME;
- UNW_DPRINT(3, "unwind.%s: interrupt frame\n", __FUNCTION__);
+ UNW_DPRINT(3, "unwind.%s: interrupt frame\n", __func__);
}
else
UNW_DPRINT(0, "unwind%s: ignoring unwabi(abi=0x%x,context=0x%x)\n",
- __FUNCTION__, abi, context);
+ __func__, abi, context);
}
static inline void
{
if (script->count >= UNW_MAX_SCRIPT_LEN) {
UNW_DPRINT(0, "unwind.%s: script exceeds maximum size of %u instructions!\n",
- __FUNCTION__, UNW_MAX_SCRIPT_LEN);
+ __func__, UNW_MAX_SCRIPT_LEN);
return;
}
script->insn[script->count++] = insn;
default:
UNW_DPRINT(0, "unwind.%s: don't know how to emit nat info for where = %u\n",
- __FUNCTION__, r->where);
+ __func__, r->where);
return;
}
insn.opc = opc;
val = offsetof(struct pt_regs, f6) + 16*(rval - 6);
else
UNW_DPRINT(0, "unwind.%s: kernel may not touch f%lu\n",
- __FUNCTION__, rval);
+ __func__, rval);
}
break;
default:
UNW_DPRINT(0, "unwind%s: register %u has unexpected `where' value of %u\n",
- __FUNCTION__, i, r->where);
+ __func__, i, r->where);
break;
}
insn.opc = opc;
r->when = UNW_WHEN_NEVER;
sr.pr_val = info->pr;
- UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __FUNCTION__, ip);
+ UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __func__, ip);
script = script_new(ip);
if (!script) {
- UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n", __func__);
STAT(unw.stat.script.build_time += ia64_get_itc() - start);
return NULL;
}
if (!e) {
/* no info, return default unwinder (leaf proc, no mem stack, no saved regs) */
UNW_DPRINT(1, "unwind.%s: no unwind info for ip=0x%lx (prev ip=0x%lx)\n",
- __FUNCTION__, ip, unw.cache[info->prev_script].ip);
+ __func__, ip, unw.cache[info->prev_script].ip);
sr.curr.reg[UNW_REG_RP].where = UNW_WHERE_BR;
sr.curr.reg[UNW_REG_RP].when = -1;
sr.curr.reg[UNW_REG_RP].val = 0;
sr.curr.reg[UNW_REG_RP].when = -1;
sr.curr.reg[UNW_REG_RP].val = sr.return_link_reg;
UNW_DPRINT(1, "unwind.%s: using default for rp at ip=0x%lx where=%d val=0x%lx\n",
- __FUNCTION__, ip, sr.curr.reg[UNW_REG_RP].where,
+ __func__, ip, sr.curr.reg[UNW_REG_RP].where,
sr.curr.reg[UNW_REG_RP].val);
}
#ifdef UNW_DEBUG
UNW_DPRINT(1, "unwind.%s: state record for func 0x%lx, t=%u:\n",
- __FUNCTION__, table->segment_base + e->start_offset, sr.when_target);
+ __func__, table->segment_base + e->start_offset, sr.when_target);
for (r = sr.curr.reg; r < sr.curr.reg + UNW_NUM_REGS; ++r) {
if (r->where != UNW_WHERE_NONE || r->when != UNW_WHEN_NEVER) {
UNW_DPRINT(1, " %s <- ", unw.preg_name[r - sr.curr.reg]);
} else {
s[dst] = 0;
UNW_DPRINT(0, "unwind.%s: no state->pt, dst=%ld, val=%ld\n",
- __FUNCTION__, dst, val);
+ __func__, dst, val);
}
break;
else {
s[dst] = 0;
UNW_DPRINT(0, "unwind.%s: UNW_INSN_MOVE_CONST bad val=%ld\n",
- __FUNCTION__, val);
+ __func__, val);
}
break;
|| s[val] < TASK_SIZE)
{
UNW_DPRINT(0, "unwind.%s: rejecting bad psp=0x%lx\n",
- __FUNCTION__, s[val]);
+ __func__, s[val]);
break;
}
#endif
if ((info->ip & (local_cpu_data->unimpl_va_mask | 0xf)) || info->ip < TASK_SIZE) {
/* don't let obviously bad addresses pollute the cache */
/* FIXME: should really be level 0 but it occurs too often. KAO */
- UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __FUNCTION__, info->ip);
+ UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __func__, info->ip);
info->rp_loc = NULL;
return -1;
}
spin_unlock_irqrestore(&unw.lock, flags);
UNW_DPRINT(0,
"unwind.%s: failed to locate/build unwind script for ip %lx\n",
- __FUNCTION__, info->ip);
+ __func__, info->ip);
return -1;
}
have_write_lock = 1;
if (!unw_valid(info, info->rp_loc)) {
/* FIXME: should really be level 0 but it occurs too often. KAO */
UNW_DPRINT(1, "unwind.%s: failed to locate return link (ip=0x%lx)!\n",
- __FUNCTION__, info->ip);
+ __func__, info->ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
/* restore the ip */
ip = info->ip = *info->rp_loc;
if (ip < GATE_ADDR) {
- UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __FUNCTION__, ip);
+ UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __func__, ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
/* validate the previous stack frame pointer */
if (!unw_valid(info, info->pfs_loc)) {
- UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __FUNCTION__);
+ UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __func__);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
num_regs = *info->cfm_loc & 0x7f; /* size of frame */
info->pfs_loc =
(unsigned long *) (info->pt + offsetof(struct pt_regs, ar_pfs));
- UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __FUNCTION__, info->pt);
+ UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __func__, info->pt);
} else
num_regs = (*info->cfm_loc >> 7) & 0x7f; /* size of locals */
info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->bsp, -num_regs);
if (info->bsp < info->regstk.limit || info->bsp > info->regstk.top) {
UNW_DPRINT(0, "unwind.%s: bsp (0x%lx) out of range [0x%lx-0x%lx]\n",
- __FUNCTION__, info->bsp, info->regstk.limit, info->regstk.top);
+ __func__, info->bsp, info->regstk.limit, info->regstk.top);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
info->sp = info->psp;
if (info->sp < info->memstk.top || info->sp > info->memstk.limit) {
UNW_DPRINT(0, "unwind.%s: sp (0x%lx) out of range [0x%lx-0x%lx]\n",
- __FUNCTION__, info->sp, info->memstk.top, info->memstk.limit);
+ __func__, info->sp, info->memstk.top, info->memstk.limit);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
if (info->ip == prev_ip && info->sp == prev_sp && info->bsp == prev_bsp) {
UNW_DPRINT(0, "unwind.%s: ip, sp, bsp unchanged; stopping here (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
return -1;
}
if ((long)((unsigned long)info->task + IA64_STK_OFFSET - sp)
< IA64_PT_REGS_SIZE) {
UNW_DPRINT(0, "unwind.%s: ran off the top of the kernel stack\n",
- __FUNCTION__);
+ __func__);
break;
}
if (unw_is_intr_frame(info) &&
unw_get_rp(info, &ip);
UNW_DPRINT(0, "unwind.%s: failed to read "
"predicate register (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return -1;
}
} while (unw_unwind(info) >= 0);
unw_get_ip(info, &ip);
UNW_DPRINT(0, "unwind.%s: failed to unwind to user-level (ip=0x%lx)\n",
- __FUNCTION__, ip);
+ __func__, ip);
return -1;
}
EXPORT_SYMBOL(unw_unwind_to_user);
" pr 0x%lx\n"
" sw 0x%lx\n"
" sp 0x%lx\n",
- __FUNCTION__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
+ __func__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
info->pr, (unsigned long) info->sw, info->sp);
STAT(unw.stat.api.init_time += ia64_get_itc() - start; local_irq_restore(flags));
}
" bsp 0x%lx\n"
" sol 0x%lx\n"
" ip 0x%lx\n",
- __FUNCTION__, info->bsp, sol, info->ip);
+ __func__, info->bsp, sol, info->ip);
find_save_locs(info);
}
{
struct switch_stack *sw = (struct switch_stack *) (t->thread.ksp + 16);
- UNW_DPRINT(1, "unwind.%s\n", __FUNCTION__);
+ UNW_DPRINT(1, "unwind.%s\n", __func__);
unw_init_frame_info(info, t, sw);
}
EXPORT_SYMBOL(unw_init_from_blocked_task);
if (end - start <= 0) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to insert empty unwind table\n",
- __FUNCTION__);
+ __func__);
return NULL;
}
if (!handle) {
UNW_DPRINT(0, "unwind.%s: ignoring attempt to remove non-existent unwind table\n",
- __FUNCTION__);
+ __func__);
return;
}
table = handle;
if (table == &unw.kernel_table) {
UNW_DPRINT(0, "unwind.%s: sorry, freeing the kernel's unwind table is a "
- "no-can-do!\n", __FUNCTION__);
+ "no-can-do!\n", __func__);
return;
}
break;
if (!prev) {
UNW_DPRINT(0, "unwind.%s: failed to find unwind table %p\n",
- __FUNCTION__, (void *) table);
+ __func__, (void *) table);
spin_unlock_irqrestore(&unw.lock, flags);
return;
}
}
if (!punw) {
- printk("%s: failed to find gate DSO's unwind table!\n", __FUNCTION__);
+ printk("%s: failed to find gate DSO's unwind table!\n", __func__);
return 0;
}
unw.gate_table = kmalloc(size, GFP_KERNEL);
if (!unw.gate_table) {
unw.gate_table_size = 0;
- printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __FUNCTION__);
+ printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __func__);
return 0;
}
unw.gate_table_size = size;
if (!user_mode(regs)) {
/* kprobe_running() needs smp_processor_id() */
preempt_disable();
- if (kprobe_running() && kprobes_fault_handler(regs, trap))
+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
ret = 1;
preempt_enable();
}
if (ret)
printk("%s: Problem encountered in __add_pages() as ret=%d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return ret;
}
pci_read_config_word(pdev, PCI_COMMAND, &config);
if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
- printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+ dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
status = ia64_pal_cache_summary(&levels, &unique_caches);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_summary() failed "
- "(status=%ld)\n", __FUNCTION__, status);
+ "(status=%ld)\n", __func__, status);
return;
}
/* cache_type (data_or_unified)= */ 2, &cci);
if (status != 0) {
printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed "
- "(status=%ld)\n", __FUNCTION__, status);
+ "(status=%ld)\n", __func__, status);
return;
}
pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
- panic("%s: Fatal %s Error", __FUNCTION__,
+ panic("%s: Fatal %s Error", __func__,
((nasid & 1) ? "TIO" : "HUBII"));
if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
- panic("%s: Fatal TIO Error", __FUNCTION__);
+ panic("%s: Fatal TIO Error", __func__);
} else
bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: "
"acpi_get_vendor_resource() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return NULL;
sizeof(struct pcibus_bussoft *)) {
printk(KERN_ERR
"%s: Invalid vendor data length %d\n",
- __FUNCTION__, vendor->byte_length);
+ __func__, vendor->byte_length);
kfree(buffer.pointer);
return NULL;
}
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: acpi_get_vendor_resource() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return 1;
sizeof(struct pci_devdev_info *)) {
printk(KERN_ERR
"%s: Invalid vendor data length: %d for: ",
- __FUNCTION__, vendor->byte_length);
+ __func__, vendor->byte_length);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
ret = 1;
pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
if (!pcidev_ptr)
- panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for pcidev_info", __func__);
memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
pcidev_prom_ptr = __va(addr);
/* Get the IRQ info */
irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
if (!irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for sn_irq_info", __func__);
if (pcidev_ptr->pdi_sn_irq_info) {
irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
status = acpi_get_parent(child, &parent);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: acpi_get_parent() failed "
- "(0x%x) for: ", __FUNCTION__, status);
+ "(0x%x) for: ", __func__, status);
acpi_ns_print_node_pathname(child, NULL);
printk("\n");
- panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ panic("%s: Unable to find host devfn\n", __func__);
}
if (parent == rootbus_handle)
break;
}
if (!child) {
printk(KERN_ERR "%s: Unable to find root bus for: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(device_handle, NULL);
printk("\n");
BUG();
status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(child, NULL);
printk("\n");
- panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ panic("%s: Unable to find host devfn\n", __func__);
}
slot = (adr >> 16) & 0xffff;
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: acpi_get_parent() failed (0x%x) for: ",
- __FUNCTION__, status);
+ __func__, status);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return AE_OK;
if (ACPI_FAILURE(status)) {
printk(KERN_ERR
"%s: Failed to find _BBN in parent of: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(handle, NULL);
printk("\n");
return AE_OK;
if (segment != pci_domain_nr(dev)) {
printk(KERN_ERR
"%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
- __FUNCTION__, segment, pci_domain_nr(dev));
+ __func__, segment, pci_domain_nr(dev));
acpi_ns_print_node_pathname(rootbus_handle, NULL);
printk("\n");
return 1;
}
} else {
printk(KERN_ERR "%s: Unable to get __SEG from: ",
- __FUNCTION__);
+ __func__);
acpi_ns_print_node_pathname(rootbus_handle, NULL);
printk("\n");
return 1;
if (!pcidev_match.handle) {
printk(KERN_ERR
"%s: Could not find matching ACPI device for %s.\n",
- __FUNCTION__, pci_name(dev));
+ __func__, pci_name(dev));
return 1;
}
if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
panic("%s: Failure obtaining pcidev_info for %s\n",
- __FUNCTION__, pci_name(dev));
+ __func__, pci_name(dev));
}
if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
printk(KERN_ERR
"%s: 0x%04x:0x%02x Unable to "
"obtain prom_bussoft_ptr\n",
- __FUNCTION__, pci_domain_nr(bus), bus->number);
+ __func__, pci_domain_nr(bus), bus->number);
return;
}
sn_common_bus_fixup(bus, prom_bussoft_ptr);
element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
if (!element) {
- dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
+ dev_dbg(&dev->dev, "%s: out of memory!\n", __func__);
return;
}
element->sysdata = SN_PCIDEV_INFO(dev);
pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
if (!pcidev_info)
- panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for pcidev_info", __func__);
sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
if (!sn_irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+ panic("%s: Unable to alloc memory for sn_irq_info", __func__);
/* Call to retrieve pci device information needed by kernel. */
status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
if (!newbuf) {
mutex_unlock(&sn_oemdata_mutex);
printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
- __FUNCTION__);
+ __func__);
return 1;
}
vfree(*sn_oemdata);
*dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
SN_DMA_ADDR_PHYS);
if (!*dma_handle) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
free_pages((unsigned long)cpuaddr, get_order(size));
return NULL;
}
phys_addr = __pa(cpu_addr);
dma_addr = provider->dma_map(pdev, phys_addr, size, SN_DMA_ADDR_PHYS);
if (!dma_addr) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
return 0;
}
return dma_addr;
SN_DMA_ADDR_PHYS);
if (!sg->dma_address) {
- printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+ printk(KERN_ERR "%s: out of ATEs\n", __func__);
/*
* Free any successfully allocated entries.
break;
default:
printk(KERN_ERR "%s: Invalid CA_APERATURE_SIZE "
- "0x%lx\n", __FUNCTION__, (ulong) CA_APERATURE_SIZE);
+ "0x%lx\n", __func__, (ulong) CA_APERATURE_SIZE);
return -1;
}
if (!tmp) {
printk(KERN_ERR "%s: Could not allocate "
"%lu bytes (order %d) for GART\n",
- __FUNCTION__,
+ __func__,
tioca_kern->ca_gart_size,
get_order(tioca_kern->ca_gart_size));
return -ENOMEM;
if (node_upper > 64) {
printk(KERN_ERR "%s: coretalk addr 0x%p node id out "
- "of range\n", __FUNCTION__, (void *)ct_addr);
+ "of range\n", __func__, (void *)ct_addr);
return 0;
}
if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
printk(KERN_ERR "%s: coretalk upper node (%u) "
"mismatch with ca_agp_dma_addr_extn (%lu)\n",
- __FUNCTION__,
+ __func__,
node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
return 0;
}
if (is_shub1() && sn_sal_rev() < 0x0406) {
printk
(KERN_ERR "%s: SGI prom rev 4.06 or greater required "
- "for tioca support\n", __FUNCTION__);
+ "for tioca support\n", __func__);
return NULL;
}
printk(KERN_WARNING
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for TIOCA bus %d\n",
- __FUNCTION__, SGI_TIOCA_ERROR,
+ __func__, SGI_TIOCA_ERROR,
(int)tioca_common->ca_common.bs_persist_busnum);
sn_set_err_irq_affinity(SGI_TIOCA_ERROR);
if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
printk(KERN_WARNING
"%s: %s - no map found for bus_addr 0x%lx\n",
- __FUNCTION__, pci_name(pdev), bus_addr);
+ __func__, pci_name(pdev), bus_addr);
} else if (--map->refcnt == 0) {
for (i = 0; i < map->ate_count; i++) {
map->ate_shadow[i] = 0;
"%s: Unable to get irq %d. "
"Error interrupts won't be routed for "
"TIOCE bus %04x:%02x\n",
- __FUNCTION__, SGI_PCIASIC_ERROR,
+ __func__, SGI_PCIASIC_ERROR,
tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum);
Allows the configuration of the timer frequency.
config HZ_48
- bool "48 HZ" if SYS_SUPPORTS_48HZ
+ bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
config HZ_100
bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
# for "archclean" cleaning up for this architecture.
#
+KBUILD_DEFCONFIG := ip22_defconfig
+
cflags-y :=
#
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
/* Provide 16 user definable device types */
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
+ { ~0, 0, 0, 0, 0, 0, 0 },
};
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
dbdev_tab_t *p=NULL;
static u16 new_id=0x1000;
- p = find_dbdev_id(0);
+ p = find_dbdev_id(~0);
if ( NULL != p )
{
memcpy(p, dev, sizeof(dbdev_tab_t));
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug 7 12:39:49 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-CONFIG_SGI_IP22=y
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_ARC32=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_ARC_CONSOLE=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_IP22_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_EISA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_DM9000 is not set
-CONFIG_SGISEEQ=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-# CONFIG_MOUSE_PS2_ALPS is not set
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IP22_ZILOG=m
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=m
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SGI_NEWPORT_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EFS_FS=m
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
obj-$(CONFIG_64BIT) += cpu-bugs64.o
obj-$(CONFIG_I8253) += i8253.o
-obj-$(CONFIG_PCSPEAKER) += pcspeaker.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
}
-static volatile int daddi_ov __initdata = 0;
+static volatile int daddi_ov __cpuinitdata = 0;
asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
{
panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
}
-int daddiu_bug __initdata = -1;
+int daddiu_bug __cpuinitdata = -1;
static inline void check_daddiu(void)
{
}
}
-static char unknown_isa[] __initdata = KERN_ERR \
+static char unknown_isa[] __cpuinitdata = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
static inline unsigned int decode_config0(struct cpuinfo_mips *c)
return config3 & MIPS_CONF_M;
}
-static void __init decode_configs(struct cpuinfo_mips *c)
+static void __cpuinit decode_configs(struct cpuinfo_mips *c)
{
/* MIPS32 or MIPS64 compliant CPU. */
c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
/*
* Name a CPU
*/
-static __init const char *cpu_to_name(struct cpuinfo_mips *c)
+static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
{
const char *name = NULL;
return name;
}
-__init void cpu_probe(void)
+__cpuinit void cpu_probe(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int cpu = smp_processor_id();
c->srsets = 1;
}
-__init void cpu_report(void)
+__cpuinit void cpu_report(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-void __init init_mips_clocksource(void)
+int __init init_mips_clocksource(void)
{
+ if (!cpu_has_counter || !mips_hpt_frequency)
+ return -ENXIO;
+
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
+
+ return 0;
}
j start_kernel
END(kernel_entry)
- __INIT
+ __CPUINIT
#ifdef CONFIG_SMP
/*
/*
* Simulate trapping 'rdhwr' instructions to provide user accessible
- * registers not implemented in hardware. The only current use of this
- * is the thread area pointer.
+ * registers not implemented in hardware.
*/
static int simulate_rdhwr(struct pt_regs *regs, unsigned int opcode)
{
int rd = (opcode & RD) >> 11;
int rt = (opcode & RT) >> 16;
switch (rd) {
- case 29:
- regs->regs[rt] = ti->tp_value;
- return 0;
+ case 0: /* CPU number */
+ regs->regs[rt] = smp_processor_id();
+ return 0;
+ case 1: /* SYNCI length */
+ regs->regs[rt] = min(current_cpu_data.dcache.linesz,
+ current_cpu_data.icache.linesz);
+ return 0;
+ case 2: /* Read count register */
+ regs->regs[rt] = read_c0_count();
+ return 0;
+ case 3: /* Count register resolution */
+ switch (current_cpu_data.cputype) {
+ case CPU_20KC:
+ case CPU_25KF:
+ regs->regs[rt] = 1;
+ break;
default:
- return -1;
+ regs->regs[rt] = 2;
+ }
+ return 0;
+ case 29:
+ regs->regs[rt] = ti->tp_value;
+ return 0;
+ default:
+ return -1;
}
}
int cp0_perfcount_irq;
EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
-void __init per_cpu_trap_init(void)
+void __cpuinit per_cpu_trap_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int status_set = ST0_CU0;
flush_icache_range(ebase + offset, ebase + offset + size);
}
-static char panic_null_cerr[] __initdata =
+static char panic_null_cerr[] __cpuinitdata =
"Trying to set NULL cache error exception handler";
/* Install uncached CPU exception handler */
-void __init set_uncached_handler(unsigned long offset, void *addr, unsigned long size)
+void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
+ unsigned long size)
{
#ifdef CONFIG_32BIT
unsigned long uncached_ebase = KSEG1ADDR(ebase);
return 2;
return 1;
}
+
+EXPORT_SYMBOL(__ucmpdi2);
* values, so we can avoid sharing the same stack area between a cached
* and the uncached mode.
*/
-unsigned long __init run_uncached(void *func)
+unsigned long __cpuinit run_uncached(void *func)
{
register long sp __asm__("$sp");
register long ret __asm__("$2");
}
}
-unsigned int __init get_c0_compare_int(void)
+unsigned int __cpuinit get_c0_compare_int(void)
{
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
}
-unsigned __init get_c0_compare_int(void)
+unsigned __cpuinit get_c0_compare_int(void)
{
#ifdef MSC01E_INT_BASE
if (cpu_has_veic) {
r3k_flush_dcache_range(start, start + size);
}
-void __init r3k_cache_init(void)
+void __cpuinit r3k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
blast_dcache32_page(addr);
}
-static void __init r4k_blast_dcache_page_setup(void)
+static void __cpuinit r4k_blast_dcache_page_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
-static void __init r4k_blast_dcache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_dcache_page_indexed_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
static void (* r4k_blast_dcache)(void);
-static void __init r4k_blast_dcache_setup(void)
+static void __cpuinit r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
static void (* r4k_blast_icache_page)(unsigned long addr);
-static void __init r4k_blast_icache_page_setup(void)
+static void __cpuinit r4k_blast_icache_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
-static void __init r4k_blast_icache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_icache_page_indexed_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
static void (* r4k_blast_icache)(void);
-static void __init r4k_blast_icache_setup(void)
+static void __cpuinit r4k_blast_icache_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
static void (* r4k_blast_scache_page)(unsigned long addr);
-static void __init r4k_blast_scache_page_setup(void)
+static void __cpuinit r4k_blast_scache_page_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
-static void __init r4k_blast_scache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_scache_page_indexed_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
static void (* r4k_blast_scache)(void);
-static void __init r4k_blast_scache_setup(void)
+static void __cpuinit r4k_blast_scache_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
}
}
-static char *way_string[] __initdata = { NULL, "direct mapped", "2-way",
+static char *way_string[] __cpuinitdata = { NULL, "direct mapped", "2-way",
"3-way", "4-way", "5-way", "6-way", "7-way", "8-way"
};
-static void __init probe_pcache(void)
+static void __cpuinit probe_pcache(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
* executes in KSEG1 space or else you will crash and burn badly. You have
* been warned.
*/
-static int __init probe_scache(void)
+static int __cpuinit probe_scache(void)
{
unsigned long flags, addr, begin, end, pow2;
unsigned int config = read_c0_config();
extern int rm7k_sc_init(void);
extern int mips_sc_init(void);
-static void __init setup_scache(void)
+static void __cpuinit setup_scache(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
}
}
-static void __init coherency_setup(void)
+static void __cpuinit coherency_setup(void)
{
change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
}
}
-void __init r4k_cache_init(void)
+void __cpuinit r4k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
}
}
-void __init tx39_cache_init(void)
+void __cpuinit tx39_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
}
}
-static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
+static char cache_panic[] __cpuinitdata =
+ "Yeee, unsupported cache architecture.";
-void __init cpu_cache_init(void)
+void __devinit cpu_cache_init(void)
{
if (cpu_has_3k_cache) {
extern void __weak r3k_cache_init(void);
* is changed.
*/
- __INIT
-
.set mips64
.set noreorder
.set noat
* (0x170-0x17f) are used to preserve k0, k1, and ra.
*/
+ __CPUINIT
+
LEAF(except_vec2_sb1)
/*
* If this error is recoverable, we need to exit the handler
* with 64-bit kernels. The prefetch offsets have been experimentally tuned
* an Origin 200.
*/
-static int pref_offset_clear __initdata = 512;
-static int pref_offset_copy __initdata = 256;
+static int pref_offset_clear __cpuinitdata = 512;
+static int pref_offset_copy __cpuinitdata = 256;
-static unsigned int pref_src_mode __initdata;
-static unsigned int pref_dst_mode __initdata;
+static unsigned int pref_src_mode __cpuinitdata;
+static unsigned int pref_dst_mode __cpuinitdata;
-static int load_offset __initdata;
-static int store_offset __initdata;
+static int load_offset __cpuinitdata;
+static int store_offset __cpuinitdata;
-static unsigned int __initdata *dest, *epc;
+static unsigned int __cpuinitdata *dest, *epc;
static unsigned int instruction_pending;
static union mips_instruction delayed_mi;
-static void __init emit_instruction(union mips_instruction mi)
+static void __cpuinit emit_instruction(union mips_instruction mi)
{
if (instruction_pending)
*epc++ = delayed_mi.word;
emit_instruction(mi);
}
-static void __init __build_store_reg(int reg)
+static void __cpuinit __build_store_reg(int reg)
{
union mips_instruction mi;
unsigned int width;
flush_delay_slot_or_nop();
}
-void __init build_clear_page(void)
+void __cpuinit build_clear_page(void)
{
unsigned int loop_start;
unsigned long off;
pr_debug("\t.set pop\n");
}
-void __init build_copy_page(void)
+void __cpuinit build_copy_page(void)
{
unsigned int loop_start;
unsigned long off;
EXPORT_SYMBOL(clear_page);
EXPORT_SYMBOL(copy_page);
-void __init build_clear_page(void)
+void __cpuinit build_clear_page(void)
{
}
-void __init build_copy_page(void)
+void __cpuinit build_copy_page(void)
{
}
.bc_inv = indy_sc_wback_invalidate
};
-void __init indy_sc_init(void)
+void __cpuinit indy_sc_init(void)
{
if (indy_sc_probe()) {
indy_sc_enable();
return 1;
}
-int __init mips_sc_init(void)
+int __cpuinit mips_sc_init(void)
{
int found = mips_sc_probe();
if (found) {
}
return found;
}
-
.bc_inv = r5k_dma_cache_inv_sc
};
-void __init r5k_sc_init(void)
+void __cpuinit r5k_sc_init(void)
{
if (r5k_sc_probe()) {
r5k_sc_enable();
.bc_inv = rm7k_sc_inv
};
-void __init rm7k_sc_init(void)
+void __cpuinit rm7k_sc_init(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config = read_c0_config();
}
}
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
{
local_flush_tlb_all();
* lifetime of the system
*/
-static int temp_tlb_entry __initdata;
+static int temp_tlb_entry __cpuinitdata;
__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
unsigned long entryhi, unsigned long pagemask)
return ret;
}
-static void __init probe_tlb(unsigned long config)
+static void __cpuinit probe_tlb(unsigned long config)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int reg;
c->tlbsize = ((reg >> 25) & 0x3f) + 1;
}
-static int __initdata ntlb = 0;
+static int __cpuinitdata ntlb = 0;
static int __init set_ntlb(char *str)
{
get_option(&str, &ntlb);
__setup("ntlb=", set_ntlb);
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
{
unsigned int config = read_c0_config();
* - On R4600 1.7 the tlbp never hits for pages smaller than
* the value in the c0_pagemask register.
* - The entire mm handling assumes the c0_pagemask register to
- * be set for 4kb pages.
+ * be set to fixed-size pages.
*/
probe_tlb(config);
write_c0_pagemask(PM_DEFAULT_MASK);
local_irq_restore(flags);
}
-static void __init probe_tlb(unsigned long config)
+static void __cpuinit probe_tlb(unsigned long config)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
c->tlbsize = 3 * 128; /* 3 sets each 128 entries */
}
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
{
unsigned int config = read_c0_config();
unsigned long status;
* why; it's not an issue caused by the core RTL.
*
*/
-static int __init m4kc_tlbp_war(void)
+static int __cpuinit m4kc_tlbp_war(void)
{
return (current_cpu_data.processor_id & 0xffff00) ==
(PRID_COMP_MIPS | PRID_IMP_4KC);
* We deliberately chose a buffer size of 128, so we won't scribble
* over anything important on overflow before we panic.
*/
-static u32 tlb_handler[128] __initdata;
+static u32 tlb_handler[128] __cpuinitdata;
/* simply assume worst case size for labels and relocs */
-static struct uasm_label labels[128] __initdata;
-static struct uasm_reloc relocs[128] __initdata;
+static struct uasm_label labels[128] __cpuinitdata;
+static struct uasm_reloc relocs[128] __cpuinitdata;
/*
* The R3000 TLB handler is simple.
*/
-static void __init build_r3000_tlb_refill_handler(void)
+static void __cpuinit build_r3000_tlb_refill_handler(void)
{
long pgdc = (long)pgd_current;
u32 *p;
* other one.To keep things simple, we first assume linear space,
* then we relocate it to the final handler layout as needed.
*/
-static u32 final_handler[64] __initdata;
+static u32 final_handler[64] __cpuinitdata;
/*
* Hazards
*
* As if we MIPS hackers wouldn't know how to nop pipelines happy ...
*/
-static void __init __maybe_unused build_tlb_probe_entry(u32 **p)
+static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
/* Found by experiment: R4600 v2.0 needs this, too. */
*/
enum tlb_write_entry { tlb_random, tlb_indexed };
-static void __init build_tlb_write_entry(u32 **p, struct uasm_label **l,
+static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
struct uasm_reloc **r,
enum tlb_write_entry wmode)
{
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pmd entry.
*/
-static void __init
+static void __cpuinit
build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int tmp, unsigned int ptr)
{
* BVADDR is the faulting address, PTR is scratch.
* PTR will hold the pgd for vmalloc.
*/
-static void __init
+static void __cpuinit
build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int bvaddr, unsigned int ptr)
{
* TMP and PTR are scratch.
* TMP will be clobbered, PTR will hold the pgd entry.
*/
-static void __init __maybe_unused
+static void __cpuinit __maybe_unused
build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
{
long pgdc = (long)pgd_current;
#endif /* !CONFIG_64BIT */
-static void __init build_adjust_context(u32 **p, unsigned int ctx)
+static void __cpuinit build_adjust_context(u32 **p, unsigned int ctx)
{
unsigned int shift = 4 - (PTE_T_LOG2 + 1) + PAGE_SHIFT - 12;
unsigned int mask = (PTRS_PER_PTE / 2 - 1) << (PTE_T_LOG2 + 1);
uasm_i_andi(p, ctx, ctx, mask);
}
-static void __init build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
+static void __cpuinit build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
{
/*
* Bug workaround for the Nevada. It seems as if under certain
UASM_i_ADDU(p, ptr, ptr, tmp); /* add in offset */
}
-static void __init build_update_entries(u32 **p, unsigned int tmp,
+static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
unsigned int ptep)
{
/*
#endif
}
-static void __init build_r4000_tlb_refill_handler(void)
+static void __cpuinit build_r4000_tlb_refill_handler(void)
{
u32 *p = tlb_handler;
struct uasm_label *l = labels;
u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned;
u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned;
-static void __init
+static void __cpuinit
iPTE_LW(u32 **p, struct uasm_label **l, unsigned int pte, unsigned int ptr)
{
#ifdef CONFIG_SMP
#endif
}
-static void __init
+static void __cpuinit
iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
unsigned int mode)
{
* the page table where this PTE is located, PTE will be re-loaded
* with it's original value.
*/
-static void __init
+static void __cpuinit
build_pte_present(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
}
/* Make PTE valid, store result in PTR. */
-static void __init
+static void __cpuinit
build_make_valid(u32 **p, struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
* Check if PTE can be written to, if not branch to LABEL. Regardless
* restore PTE with value from PTR when done.
*/
-static void __init
+static void __cpuinit
build_pte_writable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
/* Make PTE writable, update software status bits as well, then store
* at PTR.
*/
-static void __init
+static void __cpuinit
build_make_write(u32 **p, struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
{
* Check if PTE can be modified, if not branch to LABEL. Regardless
* restore PTE with value from PTR when done.
*/
-static void __init
+static void __cpuinit
build_pte_modifiable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int pte, unsigned int ptr, enum label_id lid)
{
* This places the pte into ENTRYLO0 and writes it with tlbwi.
* Then it returns.
*/
-static void __init
+static void __cpuinit
build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
{
uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
* may have the probe fail bit set as a result of a trap on a
* kseg2 access, i.e. without refill. Then it returns.
*/
-static void __init
+static void __cpuinit
build_r3000_tlb_reload_write(u32 **p, struct uasm_label **l,
struct uasm_reloc **r, unsigned int pte,
unsigned int tmp)
uasm_i_rfe(p); /* branch delay */
}
-static void __init
+static void __cpuinit
build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
unsigned int ptr)
{
uasm_i_tlbp(p); /* load delay */
}
-static void __init build_r3000_tlb_load_handler(void)
+static void __cpuinit build_r3000_tlb_load_handler(void)
{
u32 *p = handle_tlbl;
struct uasm_label *l = labels;
dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
}
-static void __init build_r3000_tlb_store_handler(void)
+static void __cpuinit build_r3000_tlb_store_handler(void)
{
u32 *p = handle_tlbs;
struct uasm_label *l = labels;
dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
}
-static void __init build_r3000_tlb_modify_handler(void)
+static void __cpuinit build_r3000_tlb_modify_handler(void)
{
u32 *p = handle_tlbm;
struct uasm_label *l = labels;
/*
* R4000 style TLB load/store/modify handlers.
*/
-static void __init
+static void __cpuinit
build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
struct uasm_reloc **r, unsigned int pte,
unsigned int ptr)
build_tlb_probe_entry(p);
}
-static void __init
+static void __cpuinit
build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
struct uasm_reloc **r, unsigned int tmp,
unsigned int ptr)
#endif
}
-static void __init build_r4000_tlb_load_handler(void)
+static void __cpuinit build_r4000_tlb_load_handler(void)
{
u32 *p = handle_tlbl;
struct uasm_label *l = labels;
dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
}
-static void __init build_r4000_tlb_store_handler(void)
+static void __cpuinit build_r4000_tlb_store_handler(void)
{
u32 *p = handle_tlbs;
struct uasm_label *l = labels;
dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
}
-static void __init build_r4000_tlb_modify_handler(void)
+static void __cpuinit build_r4000_tlb_modify_handler(void)
{
u32 *p = handle_tlbm;
struct uasm_label *l = labels;
dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
}
-void __init build_tlb_refill_handler(void)
+void __cpuinit build_tlb_refill_handler(void)
{
/*
* The refill handler is generated per-CPU, multi-node systems
}
}
-void __init flush_tlb_handlers(void)
+void __cpuinit flush_tlb_handlers(void)
{
flush_icache_range((unsigned long)handle_tlbl,
(unsigned long)handle_tlbl + sizeof(handle_tlbl));
| (e) << RE_SH \
| (f) << FUNC_SH)
-static struct insn insn_table[] __initdata = {
+static struct insn insn_table[] __cpuinitdata = {
{ insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
{ insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
{ insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
#undef M
-static inline __init u32 build_rs(u32 arg)
+static inline __cpuinit u32 build_rs(u32 arg)
{
if (arg & ~RS_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return (arg & RS_MASK) << RS_SH;
}
-static inline __init u32 build_rt(u32 arg)
+static inline __cpuinit u32 build_rt(u32 arg)
{
if (arg & ~RT_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return (arg & RT_MASK) << RT_SH;
}
-static inline __init u32 build_rd(u32 arg)
+static inline __cpuinit u32 build_rd(u32 arg)
{
if (arg & ~RD_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return (arg & RD_MASK) << RD_SH;
}
-static inline __init u32 build_re(u32 arg)
+static inline __cpuinit u32 build_re(u32 arg)
{
if (arg & ~RE_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return (arg & RE_MASK) << RE_SH;
}
-static inline __init u32 build_simm(s32 arg)
+static inline __cpuinit u32 build_simm(s32 arg)
{
if (arg > 0x7fff || arg < -0x8000)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return arg & 0xffff;
}
-static inline __init u32 build_uimm(u32 arg)
+static inline __cpuinit u32 build_uimm(u32 arg)
{
if (arg & ~IMM_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return arg & IMM_MASK;
}
-static inline __init u32 build_bimm(s32 arg)
+static inline __cpuinit u32 build_bimm(s32 arg)
{
if (arg > 0x1ffff || arg < -0x20000)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return ((arg < 0) ? (1 << 15) : 0) | ((arg >> 2) & 0x7fff);
}
-static inline __init u32 build_jimm(u32 arg)
+static inline __cpuinit u32 build_jimm(u32 arg)
{
if (arg & ~((JIMM_MASK) << 2))
printk(KERN_WARNING "Micro-assembler field overflow\n");
return (arg >> 2) & JIMM_MASK;
}
-static inline __init u32 build_func(u32 arg)
+static inline __cpuinit u32 build_func(u32 arg)
{
if (arg & ~FUNC_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
return arg & FUNC_MASK;
}
-static inline __init u32 build_set(u32 arg)
+static inline __cpuinit u32 build_set(u32 arg)
{
if (arg & ~SET_MASK)
printk(KERN_WARNING "Micro-assembler field overflow\n");
* The order of opcode arguments is implicitly left to right,
* starting with RS and ending with FUNC or IMM.
*/
-static void __init build_insn(u32 **buf, enum opcode opc, ...)
+static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...)
{
struct insn *ip = NULL;
unsigned int i;
I_u2u1u3(_xori)
/* Handle labels. */
-void __init uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
{
(*lab)->addr = addr;
(*lab)->lab = lid;
(*lab)++;
}
-int __init uasm_in_compat_space_p(long addr)
+int __cpuinit uasm_in_compat_space_p(long addr)
{
/* Is this address in 32bit compat space? */
#ifdef CONFIG_64BIT
#endif
}
-int __init uasm_rel_highest(long val)
+int __cpuinit uasm_rel_highest(long val)
{
#ifdef CONFIG_64BIT
return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
#endif
}
-int __init uasm_rel_higher(long val)
+int __cpuinit uasm_rel_higher(long val)
{
#ifdef CONFIG_64BIT
return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
#endif
}
-int __init uasm_rel_hi(long val)
+int __cpuinit uasm_rel_hi(long val)
{
return ((((val + 0x8000L) >> 16) & 0xffff) ^ 0x8000) - 0x8000;
}
-int __init uasm_rel_lo(long val)
+int __cpuinit uasm_rel_lo(long val)
{
return ((val & 0xffff) ^ 0x8000) - 0x8000;
}
-void __init UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
+void __cpuinit UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
{
if (!uasm_in_compat_space_p(addr)) {
uasm_i_lui(buf, rs, uasm_rel_highest(addr));
uasm_i_lui(buf, rs, uasm_rel_hi(addr));
}
-void __init UASM_i_LA(u32 **buf, unsigned int rs, long addr)
+void __cpuinit UASM_i_LA(u32 **buf, unsigned int rs, long addr)
{
UASM_i_LA_mostly(buf, rs, addr);
if (uasm_rel_lo(addr)) {
}
/* Handle relocations. */
-void __init
+void __cpuinit
uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid)
{
(*rel)->addr = addr;
(*rel)++;
}
-static inline void __init
+static inline void __cpuinit
__resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
{
long laddr = (long)lab->addr;
}
}
-void __init
+void __cpuinit
uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
{
struct uasm_label *l;
__resolve_relocs(rel, l);
}
-void __init
+void __cpuinit
uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off)
{
for (; rel->lab != UASM_LABEL_INVALID; rel++)
rel->addr += off;
}
-void __init
+void __cpuinit
uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off)
{
for (; lab->lab != UASM_LABEL_INVALID; lab++)
lab->addr += off;
}
-void __init
+void __cpuinit
uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
u32 *end, u32 *target)
{
uasm_move_labels(lab, first, end, off);
}
-int __init uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
+int __cpuinit uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
{
for (; rel->lab != UASM_LABEL_INVALID; rel++) {
if (rel->addr == addr
}
/* Convenience functions for labeled branches. */
-void __init
+void __cpuinit
uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_bltz(p, reg, 0);
}
-void __init
+void __cpuinit
uasm_il_b(u32 **p, struct uasm_reloc **r, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_b(p, 0);
}
-void __init
+void __cpuinit
uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_beqz(p, reg, 0);
}
-void __init
+void __cpuinit
uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_beqzl(p, reg, 0);
}
-void __init
+void __cpuinit
uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_bnez(p, reg, 0);
}
-void __init
+void __cpuinit
uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
uasm_i_bgezl(p, reg, 0);
}
-void __init
+void __cpuinit
uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
{
uasm_r_mips_pc16(r, *p, lid);
#include <linux/types.h>
#define Ip_u1u2u3(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
#define Ip_u2u1u3(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
#define Ip_u3u1u2(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
#define Ip_u1u2s3(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
#define Ip_u2s3u1(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
#define Ip_u2u1s3(op) \
-void __init \
+void __cpuinit \
uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
#define Ip_u1u2(op) \
-void __init uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
#define Ip_u1s2(op) \
-void __init uasm_i##op(u32 **buf, unsigned int a, signed int b)
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
-#define Ip_u1(op) void __init uasm_i##op(u32 **buf, unsigned int a)
+#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
-#define Ip_0(op) void __init uasm_i##op(u32 **buf)
+#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
Ip_u2u1s3(_addiu);
Ip_u3u1u2(_addu);
int lab;
};
-void __init uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
#ifdef CONFIG_64BIT
-int __init uasm_in_compat_space_p(long addr);
-int __init uasm_rel_highest(long val);
-int __init uasm_rel_higher(long val);
+int uasm_in_compat_space_p(long addr);
+int uasm_rel_highest(long val);
+int uasm_rel_higher(long val);
#endif
-int __init uasm_rel_hi(long val);
-int __init uasm_rel_lo(long val);
-void __init UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
-void __init UASM_i_LA(u32 **buf, unsigned int rs, long addr);
+int uasm_rel_hi(long val);
+int uasm_rel_lo(long val);
+void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
+void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
#define UASM_L_LA(lb) \
-static inline void __init uasm_l##lb(struct uasm_label **lab, u32 *addr) \
+static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
{ \
uasm_build_label(lab, addr, label##lb); \
}
/* This is zero so we can use zeroed label arrays. */
#define UASM_LABEL_INVALID 0
-void __init uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
-void __init
-uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
-void __init
-uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
-void __init
-uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
-void __init
-uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
- u32 *end, u32 *target);
-int __init uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
+void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
+void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
+void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
+void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
+void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
+ u32 *first, u32 *end, u32 *target);
+int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
/* Convenience functions for labeled branches. */
-void __init
-uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
-void __init
-uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
+void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
* XXX ehs: Should this happen in PCI Device mode?
*/
- set_io_port_base((unsigned long)
- ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+ bcm1480_controller.io_map_base = (unsigned long)
+ ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+ set_io_port_base(bcm1480_controller.io_map_base);
isa_slot_offset = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
extern struct pci_ops bridge_pci_ops;
-int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
+int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
{
unsigned long offset = NODE_OFFSET(nasid);
struct bridge_controller *bc;
}
}
-void pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* Propagate hose info into the subordinate devices. */
#define LAUNCHSTACK_SIZE 256
-static __initdata DEFINE_SPINLOCK(launch_lock);
+static __cpuinitdata DEFINE_SPINLOCK(launch_lock);
-static unsigned long secondary_sp __initdata;
-static unsigned long secondary_gp __initdata;
+static unsigned long secondary_sp __cpuinitdata;
+static unsigned long secondary_gp __cpuinitdata;
static unsigned char launchstack[LAUNCHSTACK_SIZE] __initdata
__attribute__((aligned(2 * sizeof(long))));
extern void xtalk_probe_node(cnodeid_t nid);
-static void __init per_hub_init(cnodeid_t cnode)
+static void __cpuinit per_hub_init(cnodeid_t cnode)
{
struct hub_data *hub = hub_data(cnode);
nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
set_c0_status(SRB_TIMOCLK);
}
-void __init hub_rtc_init(cnodeid_t cnode)
+void __cpuinit hub_rtc_init(cnodeid_t cnode)
{
/*
* We only need to initialize the current node.
extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
-static int __init probe_one_port(nasid_t nasid, int widget, int masterwid)
+static int __cpuinit probe_one_port(nasid_t nasid, int widget, int masterwid)
{
widgetreg_t widget_id;
xwidget_part_num_t partnum;
return 0;
}
-static int __init xbow_probe(nasid_t nasid)
+static int __cpuinit xbow_probe(nasid_t nasid)
{
lboard_t *brd;
klxbow_t *xbow_p;
return 0;
}
-void __init xtalk_probe_node(cnodeid_t nid)
+void __cpuinit xtalk_probe_node(cnodeid_t nid)
{
volatile u64 hubreg;
nasid_t nasid;
CPPFLAGS_vmlinux.lds := -Upowerpc
-BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
PHONY += $(BOOT_TARGETS)
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
-image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3
+image-$(CONFIG_PPC_PS3) += dtbImage.ps3
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
#
# Board ports in arch/powerpc/platform/40x/Kconfig
-image-$(CONFIG_EP405) += zImage-dtb.ep405
+image-$(CONFIG_EP405) += dtbImage.ep405
image-$(CONFIG_WALNUT) += treeImage.walnut
# Board ports in arch/powerpc/platform/44x/Kconfig
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads
-image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc
+image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
- zImage-dtb.adder875-redboot
+ dtbImage.adder875-redboot
# Board ports in arch/powerpc/platform/52xx/Kconfig
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b
# Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
image-$(CONFIG_PQ2FADS) += cuImage.pq2fads
-image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e
+image-$(CONFIG_EP8248E) += dtbImage.ep8248e
# Board ports in arch/powerpc/platform/83xx/Kconfig
image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
initrd-y := $(patsubst zImage%, zImage.initrd%, \
- $(patsubst treeImage%, treeImage.initrd%, $(image-y)))
+ $(patsubst dtbImage%, dtbImage.initrd%, \
+ $(patsubst treeImage%, treeImage.initrd%, $(image-y))))
initrd-y := $(filter-out $(image-y), $(initrd-y))
targets += $(image-y) $(initrd-y)
$(obj)/zImage.%: vmlinux $(wrapperbits)
$(call if_changed,wrap,$*)
-$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
-$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8378-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
reg = <0x00000000 0x20000000>; // 512MB at 0
};
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <77 0x8>;
+ interrupt-parent = <&ipic>;
+
+ // booting from NOR flash
+ ranges = <0 0x0 0xfe000000 0x02000000
+ 1 0x0 0xf8000000 0x00008000
+ 3 0x0 0xe0600000 0x00008000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0 0x0 0x2000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ fs@100000 {
+ reg = <0x100000 0x800000>;
+ };
+
+ kernel@1d00000 {
+ reg = <0x1d00000 0x200000>;
+ };
+
+ dtb@1f00000 {
+ reg = <0x1f00000 0x100000>;
+ };
+ };
+
+ bcsr@1,0 {
+ reg = <1 0x0 0x8000>;
+ compatible = "fsl,mpc837xmds-bcsr";
+ };
+
+ nand@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8379-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <3 0x0 0x8000>;
+
+ u-boot@0 {
+ reg = <0x0 0x100000>;
+ read-only;
+ };
+
+ kernel@100000 {
+ reg = <0x100000 0x300000>;
+ };
+
+ fs@400000 {
+ reg = <0x400000 0x1c00000>;
+ };
+ };
+ };
+
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi_wide";
+ dr_mode = "host";
+ phy_type = "ulpi";
};
mdio@24520 {
cell-index = <0>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
- /* IDSEL 0x01 (PCI-X slot) */
- 0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
- 0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
- 0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
- 0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
+ /* IDSEL 0x01 (PCI-X slot) @66MHz */
+ 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
interrupts = <0x18 0x2>;
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
-ep88xc|ep405|redboot*|ep8248e)
+ep88xc|ep405|ep8248e)
platformo="$object/fixed-head.o $object/$platform.o"
binary=y
;;
+adder875-redboot)
+ platformo="$object/fixed-head.o $object/redboot-8xx.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:18 2008
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-# CONFIG_PPC_85xx is not set
-CONFIG_PPC_8xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_8xx=y
-# CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_IRQ_PER_CPU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-
-#
-# Platform support
-#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
-CONFIG_PPC_ADDER875=y
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-# CONFIG_PQ2ADS is not set
-# CONFIG_MPIC is not set
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
-# CONFIG_FSL_ULI1575 is not set
-CONFIG_CPM=y
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_8XX_MINIMAL_FPEMU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_PROC_DEVICETREE is not set
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
-# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-uboot.dts"
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-CONFIG_OF_DEVICE=y
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-CONFIG_DAVICOM_PHY=y
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-CONFIG_FS_ENET=y
-# CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:38 2008
+# Linux kernel version: 2.6.25-rc2
+# Wed Feb 20 12:26:07 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_8XX_MINIMAL_FPEMU is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-redboot.dts"
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ stw r10, 0(r11)
+4:
+#else
ori r10, r10, _PAGE_ACCESSED
stw r10, 0(r11)
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21, 22 and 28 must be clear.
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
ori r10, r10, _PAGE_ACCESSED
+4:
+ /* and update pte in table */
+#else
+ ori r10, r10, _PAGE_ACCESSED
+#endif
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
stw r10, 0(r11)
/* The Linux PTE won't go exactly into the MMU TLB.
/* Update 'changed', among others.
*/
+#ifdef CONFIG_SWAP
+ ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+#else
ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
mfspr r11, SPRN_MD_TWC /* Get pte address again */
stw r10, 0(r11) /* and update pte in table */
or r4,r4,r7 # LSW |= t2
blr
+/*
+ * 64-bit comparison: __ucmpdi2(u64 a, u64 b)
+ * Returns 0 if a < b, 1 if a == b, 2 if a > b.
+ */
+_GLOBAL(__ucmpdi2)
+ cmplw r3,r5
+ li r3,1
+ bne 1f
+ cmplw r4,r6
+ beqlr
+1: li r3,0
+ bltlr
+ li r3,2
+ blr
+
_GLOBAL(abs)
srawi r4,r3,31
xor r3,r3,r4
struct resource *res = dev->resource + i;
if (!res->flags)
continue;
- if (res->end == 0xffffffff) {
+ /* On platforms that have PPC_PCI_PROBE_ONLY set, we don't
+ * consider 0 as an unassigned BAR value. It's technically
+ * a valid value, but linux doesn't like it... so when we can
+ * re-assign things, we do so, but if we can't, we keep it
+ * around and hope for the best...
+ */
+ if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
pci_name(dev), i,
(unsigned long long)res->start,
extern void single_step_exception(struct pt_regs *regs);
extern int sys_sigreturn(struct pt_regs *regs);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
+int __ucmpdi2(unsigned long long, unsigned long long);
+EXPORT_SYMBOL(__ucmpdi2);
#endif
EXPORT_SYMBOL(memcpy);
} else {
/* Find storage for the HPT. Must be contiguous in
* the absolute address space. On cell we want it to be
- * in the first 1 Gig.
+ * in the first 2 Gig so we can use it for IOMMU hacks.
*/
if (machine_is(cell))
- limit = 0x40000000;
+ limit = 0x80000000;
else
limit = 0;
if (ret)
return ret;
/* Map BCSR area */
- np = of_find_node_by_name(NULL, "bcsr");
+ np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
if (np) {
- struct resource res;
-
- of_address_to_resource(np, 0, &res);
- bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+ bcsr_regs = of_iomap(np, 0);
of_node_put(np);
}
if (!bcsr_regs)
static struct of_device_id mpc837x_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
+ { .compatible = "simple-bus", },
{},
};
select FSL_SOC
select MPC83xx
select IPIC
- select FSL_EMB_PERFMON
config PPC_86xx
bool "Freescale 86xx"
default y
config FSL_EMB_PERFMON
- bool
+ bool "Freescale Embedded Perfmon"
+ depends on E500 || PPC_83xx
+ help
+ This is the Performance Monitor support found on the e500 core
+ and some e300 cores (c3 and c4). Select this only if your
+ core supports the Embedded Performance Monitor APU
config PTE_64BIT
bool
{
BUG_ON(ctx->state != SPU_STATE_SAVED);
- if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags))
+ if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) &&
+ test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
spu_activate(ctx, 0);
spu_release(ctx);
}
}
+ set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
return 0;
}
*npc = ctx->ops->npc_read(ctx);
spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
- ctx->policy = SCHED_IDLE;
+ clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
spu_release(ctx);
if (signal_pending(current))
if (ctx->policy == SCHED_FIFO)
goto out;
- if (--ctx->time_slice && ctx->policy != SCHED_IDLE)
+ if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
goto out;
spu = ctx->spu;
new = grab_runnable_context(ctx->prio + 1, spu->node);
if (new) {
spu_unschedule(spu, ctx);
- if (ctx->policy != SCHED_IDLE)
+ if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
spu_add_to_rq(ctx);
} else {
spu_context_nospu_trace(spusched_tick__newslice, ctx);
enum {
SPU_SCHED_NOTIFY_ACTIVE,
SPU_SCHED_WAS_ACTIVE, /* was active upon spu_acquire_saved() */
+ SPU_SCHED_SPU_RUN, /* context is within spu_run */
};
struct spu_context {
if (np == NULL)
goto not_found;
viaint = irq_of_parse_and_map(np, 0);;
-#endif /* CONFIG_ADB_PMU */
not_found:
+#endif /* CONFIG_ADB_PMU */
return viaint;
}
}
/* Validate some of the fields */
- if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+ if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
printk(KERN_ERR "qe-firmware: invalid data\n");
return -EINVAL;
}
* If we haven't checked yet, and a driver hasn't uploaded a firmware
* yet, then check the device tree for information.
*/
- if (initialized || qe_firmware_uploaded)
+ if (qe_firmware_uploaded)
+ return &qe_firmware_info;
+
+ if (initialized)
return NULL;
initialized = 1;
mfspr r11, SPRN_MD_TWC /* ....and get the pte address */
lwz r10, 0(r11) /* Get the pte */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
+ stw r10, 0(r11)
+4:
+#else
ori r10, r10, _PAGE_ACCESSED
stw r10, 0(r11)
+#endif
/* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21, 22 and 28 must be clear.
DO_8xx_CPU6(0x3b80, r3)
mtspr SPRN_MD_TWC, r11
- mfspr r11, SPRN_MD_TWC /* get the pte address again */
+#ifdef CONFIG_SWAP
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+ /* and update pte in table */
+#else
ori r10, r10, _PAGE_ACCESSED
+#endif
+ mfspr r11, SPRN_MD_TWC /* get the pte address again */
stw r10, 0(r11)
/* The Linux PTE won't go exactly into the MMU TLB.
/* Update 'changed', among others.
*/
+#ifdef CONFIG_SWAP
+ ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+ /* do not set the _PAGE_ACCESSED bit of a non-present page */
+ andi. r11, r10, _PAGE_PRESENT
+ beq 4f
+ ori r10, r10, _PAGE_ACCESSED
+4:
+#else
ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
mfspr r11, SPRN_MD_TWC /* Get pte address again */
stw r10, 0(r11) /* and update pte in table */
source "fs/Kconfig.binfmt"
+config FORCE_MAX_ZONEORDER
+ int
+ default "9"
+
config PROCESS_DEBUG
bool "Show crashed user process info"
help
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sat Feb 9 12:13:01 2008
+# Linux kernel version: 2.6.25-rc4
+# Wed Mar 5 11:22:59 2008
#
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CPUSETS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
#
# Sonics Silicon Backplane
#
+# CONFIG_MEMSTICK is not set
#
# File systems
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
+# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_DEBUG_PAGEALLOC is not set
#
EXTRA_AFLAGS := -traditional
+#
+# Passing null pointers is ok for smp code, since we access the lowcore here.
+#
+CFLAGS_smp.o := -Wno-nonnull
+
obj-y := bitmap.o traps.o time.o process.o base.o early.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
__cpcmd(defsys_cmd, NULL, 0, &response);
- if (response != 0)
+ if (response != 0) {
+ kernel_nss_name[0] = '\0';
return;
+ }
__cpcmd(savesys_cmd, NULL, 0, &response);
- if (response != strlen(savesys_cmd))
+ if (response != strlen(savesys_cmd)) {
+ kernel_nss_name[0] = '\0';
return;
+ }
ipl_flags = IPL_NSS_VALID;
}
default:
break;
}
+ disabled_wait((unsigned long) __builtin_return_address(0));
}
static void __init reipl_probe(void)
local_mcck_disable();
if (test_thread_flag(TIF_MCCK_PENDING)) {
local_mcck_enable();
+ /* disable monitor call class 0 */
+ __ctl_clear_bit(8, 15);
+ atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
+ hcpu);
local_irq_enable();
s390_handle_mcck();
return;
panic_stack = __get_free_page(GFP_KERNEL);
if (!panic_stack || !async_stack)
goto out;
- /*
- * Only need to copy the first 512 bytes from address 0. But since
- * the compiler emits a warning if src == NULL for memcpy use copy_page
- * instead. Copies more than needed but this code is not performance
- * critical.
- */
- copy_page(lowcore, &S390_lowcore);
- memset((void *)lowcore + 512, 0, sizeof(*lowcore) - 512);
+ memcpy(lowcore, &S390_lowcore, 512);
+ memset((char *)lowcore + 512, 0, sizeof(*lowcore) - 512);
lowcore->async_stack = async_stack + ASYNC_SIZE;
lowcore->panic_stack = panic_stack + PAGE_SIZE;
*/
static void start_hz_timer(void)
{
- BUG_ON(!in_interrupt());
-
if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
return;
account_ticks(get_clock());
This includes both the OEM SecureEdge products as well as the
SME product line.
-config SH_7710VOIPGW
- bool "SH7710-VOIP-GW"
- depends on CPU_SUBTYPE_SH7710
- help
- Select this option to build a kernel for the SH7710 based
- VOIP GW.
-
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp
machdir-$(CONFIG_SH_MIGOR) += renesas/migor
machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780
-machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw
machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto
machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev
machdir-$(CONFIG_SH_LANDISK) += landisk
* bios-less APM driver for hp680
*
* Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License.
#include <asm/adc.h>
#include <asm/hp6xx.h>
-#define SH7709_PGDR 0xa400012c
-
+/* percentage values */
#define APM_CRITICAL 10
#define APM_LOW 30
+/* resonably sane values */
#define HP680_BATTERY_MAX 898
#define HP680_BATTERY_MIN 486
#define HP680_BATTERY_AC_ON 1023
#define MODNAME "hp6x0_apm"
+#define PGDR 0xa400012c
+
static void hp6x0_apm_get_power_status(struct apm_power_info *info)
{
int battery, backup, charging, percentage;
percentage = 100 * (battery - HP680_BATTERY_MIN) /
(HP680_BATTERY_MAX - HP680_BATTERY_MIN);
+ /* % of full battery */
+ info->battery_life = percentage;
+
+ /* We want our estimates in minutes */
+ info->units = 0;
+
+ /* Extremely(!!) rough estimate, we will replace this with a datalist later on */
+ info->time = (2 * battery);
+
info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
APM_AC_ONLINE : APM_AC_OFFLINE;
- pgdr = ctrl_inb(SH7709_PGDR);
+ pgdr = ctrl_inb(PGDR);
if (pgdr & PGDR_MAIN_BATTERY_OUT) {
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
info->battery_flag = 0x80;
} else if (charging < 8) {
info->battery_status = APM_BATTERY_STATUS_CHARGING;
info->battery_flag = 0x08;
- info->ac_line_status = 0xff;
+ info->ac_line_status = 0x01;
} else if (percentage <= APM_CRITICAL) {
info->battery_status = APM_BATTERY_STATUS_CRITICAL;
info->battery_flag = 0x04;
info->battery_status = APM_BATTERY_STATUS_HIGH;
info->battery_flag = 0x01;
}
-
- info->units = 0;
}
static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-/*
- * Renesas Technology SH7710 VoIP Gateway
- *
- * Copyright (C) 2006 Ranjit Deshpande
- * Kenati Technologies Inc.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct ipr_data sh7710voipgw_ipr_map[] = {
- { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },
- { WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY },
-
- /* SCIF0 */
- { SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
- { SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-
- /* DMAC-1 */
- { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
- { DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-
- /* DMAC-2 */
- { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
- { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
- /* IPSEC */
- { IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY },
-
- /* EDMAC */
- { EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY },
- { EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY },
- { EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY },
-
- /* SIOF0 */
- { SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
- /* SIOF1 */
- { SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
- { SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-
- /* SLIC IRQ's */
- { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
- { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7710voipgw_init_irq(void)
-{
- /* Disable all interrupts in IPR registers */
- ctrl_outw(0x0, INTC_IPRA);
- ctrl_outw(0x0, INTC_IPRB);
- ctrl_outw(0x0, INTC_IPRC);
- ctrl_outw(0x0, INTC_IPRD);
- ctrl_outw(0x0, INTC_IPRE);
- ctrl_outw(0x0, INTC_IPRF);
- ctrl_outw(0x0, INTC_IPRG);
- ctrl_outw(0x0, INTC_IPRH);
- ctrl_outw(0x0, INTC_IPRI);
-
- /* Ack all interrupt sources in the IRR0 register */
- ctrl_outb(0x3f, INTC_IRR0);
-
- /* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable
- * IRL mode.
- */
- ctrl_outw(0x2aa, INTC_ICR1);
-
- make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map));
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7710voipgw __initmv = {
- .mv_name = "SH7710 VoIP Gateway",
- .mv_nr_irqs = 104,
- .mv_init_irq = sh7710voipgw_init_irq,
-};
shift = mk_ilsel_shift(bit);
pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
- __FUNCTION__, bit, addr, shift, set);
+ __func__, bit, addr, shift, set);
tmp = ctrl_inw(addr);
tmp &= ~(0xf << shift);
* safe default.
*/
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
- __FUNCTION__, offset);
+ __func__, offset);
result = PVR;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Tue Nov 13 20:32:39 2007
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar 6 15:39:59 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_32BIT is not set
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
CONFIG_VSYSCALL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# Board support
#
# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_SDK7780 is not set
CONFIG_SH_HIGHLANDER=y
# CONFIG_SH_R7780RP is not set
CONFIG_SH_R7780MP=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_93CX6=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
-# CONFIG_SMC911X is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_SH_STANDARD_BIOS=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 15 14:06:20 2007
+# Linux kernel version: 2.6.25-rc3
+# Thu Feb 28 10:18:04 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH4=y
CONFIG_CPU_SH4A=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
# CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
# CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
# CONFIG_SH_STORE_QUEUES is not set
CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
-CONFIG_CPU_HAS_INTC_IRQ=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+# CONFIG_SH_SDK7780 is not set
+# CONFIG_SH_HIGHLANDER is not set
#
# Timer and clock configuration
#
CONFIG_SH_TMU=y
CONFIG_SH_TIMER_IRQ=28
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
#
# Additional SuperH Device Drivers
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
-# CONFIG_SMP is not set
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00810000
-# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
#
# Bus options
#
+# CONFIG_CF_ENABLER is not set
CONFIG_PCI=y
CONFIG_SH_PCIDMA_NONCOHERENT=y
CONFIG_PCI_AUTO=y
CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
#
# Device Drivers
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
#
+# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
CONFIG_PHYLIB=y
#
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_SMC91X=y
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PPP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TILEBLITTING is not set
#
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# Open Sound System
#
CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
#
# USB Imaging devices
#
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# Pseudo filesystems
#
CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
+CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_SH_KGDB is not set
# Security options
#
# CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 12:48:56 2006
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar 6 16:02:29 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
#
# System type
#
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-CONFIG_SH_7710VOIPGW=y
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set
CONFIG_CPU_SUBTYPE_SH7710=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
#
+CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_29BIT=y
CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
#
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
# CONFIG_SH_FPU_EMU is not set
CONFIG_SH_DSP=y
# CONFIG_SH_ADC is not set
CONFIG_CPU_HAS_INTEVT=y
CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
#
-# Timer support
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+
+#
+# Timer and clock configuration
#
CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
CONFIG_SH_PCLK_FREQ=32768000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
# Companion Chips
#
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
#
# Kernel features
#
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
#
# Boot options
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
# CONFIG_CMDLINE_BOOL is not set
#
# Bus options
#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
-#
-# PCI Hotplug Support
-#
-
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
# CONFIG_BINFMT_MISC is not set
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
#
# Networking
#
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_PPTP=m
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
# CONFIG_IP_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=y
#
# Classification
# CONFIG_CLS_U32_MARK is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
# CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
CONFIG_PHONE=y
-# CONFIG_PHONE_IXJ is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_UNIX98_PTYS is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
# CONFIG_I2C is not set
#
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
#
# Library routines
#
+CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
* and cache configuration in detect_cpu_and_cache_system().
*/
-asmlinkage void __cpuinit sh_cpu_init(void)
+asmlinkage void __init sh_cpu_init(void)
{
current_thread_info()->cpu = hard_smp_processor_id();
if (unlikely(!map)) {
printk("%s: bad store queue address 0x%08lx\n",
- __FUNCTION__, vaddr);
+ __func__, vaddr);
return;
}
vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
if (!vma) {
printk(KERN_ERR "%s: bad address 0x%08lx\n",
- __FUNCTION__, map->sq_addr);
+ __func__, map->sq_addr);
return;
}
}
if (dest >= 63) {
printk(KERN_NOTICE "%s: Invalid dest reg %d "
"specified in movi handler. Failed "
- "opcode was 0x%lx: ", __FUNCTION__,
+ "opcode was 0x%lx: ", __func__,
dest, op);
continue;
#endif
static DEFINE_SPINLOCK(trapped_lock);
-int __init register_trapped_io(struct trapped_io *tiop)
+int register_trapped_io(struct trapped_io *tiop)
{
struct resource *res;
unsigned long len = 0, flags = 0;
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
-#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__))
+#if (__GNUC_MINOR__ >= 2 || defined(__GNUC_STM_RELEASE__))
/*
- * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST
+ * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
* compiler which include backported patches.
*/
DECLARE_EXPORT(__sdivsi3_i4i);
EXPORT_SYMBOL(csum_ipv6_magic);
#endif
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__clear_user);
EXPORT_SYMBOL(_ebss);
EXPORT_SYMBOL(__up);
EXPORT_SYMBOL(__put_user_asm_l);
EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(__copy_user);
EXPORT_SYMBOL(memcpy);
EXPORT_SYMBOL(__udelay);
count -= LATCH;
} else {
printk("%s (): hardware timer problem?\n",
- __FUNCTION__);
+ __func__);
}
}
} else
count -= LATCH;
} else {
printk("%s (): hardware timer problem?\n",
- __FUNCTION__);
+ __func__);
}
}
} else
ret = register_cpu(&per_cpu(cpu_devices, i), i);
if (unlikely(ret))
printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
- __FUNCTION__, i, ret);
+ __func__, i, ret);
}
#if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
/* Called with interrupts disabled */
asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
{
- show_excp_regs(__FUNCTION__, -1, -1, regs);
+ show_excp_regs(__func__, -1, -1, regs);
die_if_kernel("exception", regs, ex);
}
result = (result & 0xffffffff) + (result >> 32);
pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n",
- __FUNCTION__, saddr, daddr, len, proto, sum, result);
+ __func__, saddr, daddr, len, proto, sum, result);
return (__wsum)result;
}
* a 1GHz box, that's about 2 seconds.
*/
-void __delay(int loops)
+void __delay(unsigned long loops)
{
long long dummy;
__asm__ __volatile__("gettr tr0, %1\n\t"
:"0"(loops));
}
-void __udelay(unsigned long long usecs, unsigned long lpj)
+inline void __const_udelay(unsigned long xloops)
{
- usecs *= (((unsigned long long) HZ << 32) / 1000000) * lpj;
- __delay((long long) usecs >> 32);
+ __delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
}
-void __ndelay(unsigned long long nsecs, unsigned long lpj)
+void __udelay(unsigned long usecs)
{
- nsecs *= (((unsigned long long) HZ << 32) / 1000000000) * lpj;
- __delay((long long) nsecs >> 32);
+ __const_udelay(usecs * 0x000010c6); /* 2**32 / 1000000 */
}
-void udelay(unsigned long usecs)
+void __ndelay(unsigned long nsecs)
{
- __udelay(usecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
-}
-
-void ndelay(unsigned long nsecs)
-{
- __ndelay(nsecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
+ __const_udelay(nsecs * 0x00000005);
}
config PMB
bool "Support 32-bit physical addressing through PMB"
- depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+ depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
select 32BIT
default y
help
/* We only have ZONE_NORMAL, so this is easy.. */
ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages);
if (unlikely(ret))
- printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret);
+ printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
return ret;
}
p = remove_vm_area((void *)(vaddr & PAGE_MASK));
if (!p) {
- printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr);
+ printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
return;
}
} else {
if (!printed_full) {
printk("%s: done with statics, switching to kmalloc\n",
- __FUNCTION__);
+ __func__);
printed_full = 1;
}
tlen = strlen(name);
res = shmedia_find_resource(&shmedia_iomap, vaddr);
if (!res) {
printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
- __FUNCTION__, vaddr);
+ __func__, vaddr);
return;
}
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/threads.h>
+#include <linux/fs.h>
#include <asm/addrspace.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#endif
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#ifdef DEBUG_FAULT
print_task(tsk);
printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
- __FUNCTION__,__LINE__,
+ __func__, __LINE__,
address,regs->pc,textaccess,writeaccess);
show_regs(regs);
#endif
R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
-7710VOIPGW SH_7710VOIPGW
LBOXRE2 SH_LBOX_RE2
X3PROTO SH_X3PROTO
MAGICPANELR2 SH_MAGIC_PANEL_R2
config ZONE_DMA
def_bool y
-config QUICKLIST
- def_bool X86_32
-
config SBUS
bool
far_ptr video_mode_ptr; /* 14 */
u16 total_memory; /* 18 */
- u16 oem_software_rev; /* 20 */
- far_ptr oem_vendor_name_ptr; /* 22 */
- far_ptr oem_product_name_ptr; /* 26 */
- far_ptr oem_product_rev_ptr; /* 30 */
-
- u8 reserved[222]; /* 34 */
- u8 oem_data[256]; /* 256 */
+ u8 reserved[236]; /* 20 */
} __attribute__ ((packed));
#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24))
-#define VBE2_MAGIC ('V' + ('B' << 8) + ('E' << 16) + ('2' << 24))
struct vesa_mode_info {
u16 mode_attr; /* 0 */
video_vesa.modes = GET_HEAP(struct mode_info, 0);
- vginfo.signature = VBE2_MAGIC;
-
ax = 0x4f00;
di = (size_t)&vginfo;
asm(INT10
regs->ss = __USER32_DS;
set_fs(USER_DS);
- regs->flags &= ~X86_EFLAGS_TF;
+ regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
regs->ss = __USER32_DS;
set_fs(USER_DS);
- regs->flags &= ~X86_EFLAGS_TF;
+ regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
{
struct cpufreq_freqs freqs;
u32 lo, hi;
- u8 current_multiplier, current_voltage;
int err = 0;
int i;
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
+#ifdef DEBUG
+ {
+ u8 current_multiplier, current_voltage;
+
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
current_multiplier = (lo >> 8) & 0xff;
printk(KERN_INFO "eps: Current multiplier = %d\n",
current_multiplier);
-
+ }
+#endif
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return err;
}
}
#else
env->fip = fxsave->fip;
- env->fcs = fxsave->fcs;
+ env->fcs = (u16) fxsave->fcs | ((u32) fxsave->fop << 16);
env->foo = fxsave->foo;
env->fos = fxsave->fos;
#endif
return set_flags(child, value);
#ifdef CONFIG_X86_64
+ /*
+ * Orig_ax is really just a flag with small positive and
+ * negative values, so make sure to always sign-extend it
+ * from 32 bits so that it works correctly regardless of
+ * whether we come from a 32-bit environment or not.
+ */
+ case offsetof(struct user_regs_struct, orig_ax):
+ value = (long) (s32) value;
+ break;
+
case offsetof(struct user_regs_struct,fs_base):
if (value >= TASK_SIZE_OF(child))
return -EIO;
R32(esi, si);
R32(ebp, bp);
R32(eax, ax);
- R32(orig_eax, orig_ax);
R32(eip, ip);
R32(esp, sp);
+ case offsetof(struct user32, regs.orig_eax):
+ /*
+ * Sign-extend the value so that orig_eax = -1
+ * causes (long)orig_ax < 0 tests to fire correctly.
+ */
+ regs->orig_ax = (long) (s32) value;
+ break;
+
case offsetof(struct user32, regs.eflags):
return set_flags(child, value);
}
}
+void __attribute__((weak)) mach_reboot_fixups(void)
+{
+}
+
static void native_machine_emergency_restart(void)
{
int i;
/* Could also try the reset bit in the Hammer NB */
switch (reboot_type) {
case BOOT_KBD:
+ mach_reboot_fixups(); /* for board specific fixups */
+
for (i = 0; i < 10; i++) {
kb_wait();
udelay(50);
* The tracer may want to single-step inside the
* handler too.
*/
- regs->flags &= ~TF_MASK;
+ regs->flags &= ~(TF_MASK | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
* The tracer may want to single-step inside the
* handler too.
*/
- regs->flags &= ~TF_MASK;
+ regs->flags &= ~(TF_MASK | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
see include/asm-x86_64/uaccess.h for details. */
set_fs(USER_DS);
- regs->flags &= ~X86_EFLAGS_TF;
+ regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
if (test_thread_flag(TIF_SINGLESTEP))
ptrace_notify(SIGTRAP);
#ifdef DEBUG_SIG
return -EFAULT;
}
+/*
+ * Return -1L or the syscall number that @regs is executing.
+ */
+static long current_syscall(struct pt_regs *regs)
+{
+ /*
+ * We always sign-extend a -1 value being set here,
+ * so this is always either -1L or a syscall number.
+ */
+ return regs->orig_ax;
+}
+
+/*
+ * Return a value that is -EFOO if the system call in @regs->orig_ax
+ * returned an error. This only works for @regs from @current.
+ */
+static long current_syscall_ret(struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_EMULATION
+ if (test_thread_flag(TIF_IA32))
+ /*
+ * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+ * and will match correctly in comparisons.
+ */
+ return (int) regs->ax;
+#endif
+ return regs->ax;
+}
+
/*
* OK, we're invoking a handler
*/
#endif
/* Are we from a system call? */
- if ((long)regs->orig_ax >= 0) {
+ if (current_syscall(regs) >= 0) {
/* If so, check system call restarting.. */
- switch (regs->ax) {
+ switch (current_syscall_ret(regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
regs->ax = -EINTR;
}
/* Did we come from a system call? */
- if ((long)regs->orig_ax >= 0) {
+ if (current_syscall(regs) >= 0) {
/* Restart the system call - no handlers present */
- long res = regs->ax;
- switch (res) {
+ switch (current_syscall_ret(regs)) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
} else {
write_debugctlmsr(child,
- child->thread.debugctlmsr & ~TIF_DEBUGCTLMSR);
+ child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
if (!child->thread.debugctlmsr)
clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
* Make sure block stepping (BTF) is disabled.
*/
write_debugctlmsr(child,
- child->thread.debugctlmsr & ~TIF_DEBUGCTLMSR);
+ child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
if (!child->thread.debugctlmsr)
clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
.blocked_interrupts = { 1 }, /* Block timer interrupts */
.syscall_vec = SYSCALL_VECTOR,
};
-static cycle_t clock_base;
/*G:037 async_hcall() is pretty simple: I'm quite proud of it really. We have a
* ring buffer of stored hypercalls which the Host will run though next time we
case 1: /* Basic feature request. */
/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
*cx &= 0x00002201;
- /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, FPU. */
- *dx &= 0x07808101;
+ /* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+ *dx &= 0x07808111;
/* The Host can do a nice optimization if it knows that the
* kernel mappings (addresses above 0xC0000000 or whatever
* PAGE_OFFSET is set to) haven't changed. But Linux calls
{
*pmdp = pmdval;
lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
- (__pa(pmdp)&(PAGE_SIZE-1)), 0);
+ (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
}
/* There are a couple of legacy places where the kernel sets a PTE, but we
return lguest_data.time.tv_sec;
}
+/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at,
+ * or 0 if it's unusable as a reliable clock source. This matches what we want
+ * here: if we return 0 from this function, the x86 TSC clock will not register
+ * itself. */
+static unsigned long lguest_cpu_khz(void)
+{
+ return lguest_data.tsc_khz;
+}
+
+/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
+ * we read the time value given to us by the Host. */
static cycle_t lguest_clock_read(void)
{
unsigned long sec, nsec;
- /* If the Host tells the TSC speed, we can trust that. */
- if (lguest_data.tsc_khz)
- return native_read_tsc();
-
- /* If we can't use the TSC, we read the time value written by the Host.
- * Since it's in two parts (seconds and nanoseconds), we risk reading
- * it just as it's changing from 99 & 0.999999999 to 100 and 0, and
- * getting 99 and 0. As Linux tends to come apart under the stress of
- * time travel, we must be careful: */
+ /* Since the time is in two parts (seconds and nanoseconds), we risk
+ * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
+ * and getting 99 and 0. As Linux tends to come apart under the stress
+ * of time travel, we must be careful: */
do {
/* First we read the seconds part. */
sec = lguest_data.time.tv_sec;
/* Now if the seconds part has changed, try again. */
} while (unlikely(lguest_data.time.tv_sec != sec));
- /* Our non-TSC clock is in real nanoseconds. */
+ /* Our lguest clock is in real nanoseconds. */
return sec*1000000000ULL + nsec;
}
-/* This is what we tell the kernel is our clocksource. */
+/* This is the fallback clocksource: lower priority than the TSC clocksource. */
static struct clocksource lguest_clock = {
.name = "lguest",
- .rating = 400,
+ .rating = 200,
.read = lguest_clock_read,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/* The "scheduler clock" is just our real clock, adjusted to start at zero */
-static unsigned long long lguest_sched_clock(void)
-{
- return cyc2ns(&lguest_clock, lguest_clock_read() - clock_base);
-}
-
/* We also need a "struct clock_event_device": Linux asks us to set it to go
* off some time in the future. Actually, James Morris figured all this out, I
* just applied the patch. */
/* Set up the timer interrupt (0) to go to our simple timer routine */
set_irq_handler(0, lguest_time_irq);
- /* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
- * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
- * Either way, the "rating" is set so high that it's always chosen over
- * any other clocksource. */
- if (lguest_data.tsc_khz)
- lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
- lguest_clock.shift);
- clock_base = lguest_clock_read();
clocksource_register(&lguest_clock);
- /* Now we've set up our clock, we can use it as the scheduler clock */
- pv_time_ops.sched_clock = lguest_sched_clock;
-
/* We can't set cpumask in the initializer: damn C limitations! Set it
* here and register our timer device. */
lguest_clockevent.cpumask = cpumask_of_cpu(0);
/* time operations */
pv_time_ops.get_wallclock = lguest_get_wallclock;
pv_time_ops.time_init = lguest_time_init;
+ pv_time_ops.get_cpu_khz = lguest_cpu_khz;
/* Now is a good time to look at the implementations of these functions
* before returning to the rest of lguest_init(). */
return NULL;
}
- WARN_ON_ONCE(page_is_ram(pfn));
-
switch (mode) {
case IOR_MODE_UNCACHED:
default:
pgd_t *pgd_alloc(struct mm_struct *mm)
{
- pgd_t *pgd = quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+ pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
- mm->pgd = pgd; /* so that alloc_pd can use it */
+ /* so that alloc_pd can use it */
+ mm->pgd = pgd;
+ if (pgd)
+ pgd_ctor(pgd);
if (pgd && !pgd_prepopulate_pmd(mm, pgd)) {
- quicklist_free(0, pgd_dtor, pgd);
+ pgd_dtor(pgd);
+ free_page((unsigned long)pgd);
pgd = NULL;
}
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
{
pgd_mop_up_pmds(mm, pgd);
- quicklist_free(0, pgd_dtor, pgd);
-}
-
-void check_pgt_cache(void)
-{
- quicklist_trim(0, pgd_dtor, 25, 16);
+ pgd_dtor(pgd);
+ free_page((unsigned long)pgd);
}
void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
"b" (bx),
"D" ((long)reg),
"S" (&pci_indirect));
+ /*
+ * Zero-extend the result beyond 8 bits, do not trust the
+ * BIOS having done it:
+ */
+ *value &= 0xff;
break;
case 2:
__asm__("lcall *(%%esi); cld\n\t"
"b" (bx),
"D" ((long)reg),
"S" (&pci_indirect));
+ /*
+ * Zero-extend the result beyond 16 bits, do not trust the
+ * BIOS having done it:
+ */
+ *value &= 0xffff;
break;
case 4:
__asm__("lcall *(%%esi); cld\n\t"
static int __init genhd_device_init(void)
{
- class_register(&block_class);
+ int error = class_register(&block_class);
+ if (unlikely(error))
+ return error;
bdev_map = kobj_map_init(base_probe, &block_class_lock);
blk_dev_init();
config CRYPTO_AUTHENC
tristate "Authenc support"
select CRYPTO_AEAD
+ select CRYPTO_BLKCIPHER
select CRYPTO_MANAGER
select CRYPTO_HASH
help
crypto_blkcipher-objs := ablkcipher.o
crypto_blkcipher-objs += blkcipher.o
+crypto_blkcipher-objs += chainiv.o
+crypto_blkcipher-objs += eseqiv.o
obj-$(CONFIG_CRYPTO_BLKCIPHER) += crypto_blkcipher.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += chainiv.o
-obj-$(CONFIG_CRYPTO_BLKCIPHER) += eseqiv.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
crypto_hash-objs := hash.o
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(crypto_alloc_ablkcipher);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Asynchronous block chaining cipher type");
}
EXPORT_SYMBOL_GPL(skcipher_geniv_exit);
+static int __init blkcipher_module_init(void)
+{
+ int err;
+
+ err = chainiv_module_init();
+ if (err)
+ goto out;
+
+ err = eseqiv_module_init();
+ if (err)
+ goto eseqiv_err;
+
+out:
+ return err;
+
+eseqiv_err:
+ chainiv_module_exit();
+ goto out;
+}
+
+static void __exit blkcipher_module_exit(void)
+{
+ eseqiv_module_exit();
+ chainiv_module_exit();
+}
+
+module_init(blkcipher_module_init);
+module_exit(blkcipher_module_exit);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic block chaining cipher type");
.module = THIS_MODULE,
};
-static int __init chainiv_module_init(void)
+int __init chainiv_module_init(void)
{
return crypto_register_template(&chainiv_tmpl);
}
-static void __exit chainiv_module_exit(void)
+void chainiv_module_exit(void)
{
crypto_unregister_template(&chainiv_tmpl);
}
-
-module_init(chainiv_module_init);
-module_exit(chainiv_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Chain IV Generator");
#include <linux/module.h>
#include <linux/scatterlist.h>
+#include "internal.h"
+
static int init(struct hash_desc *desc)
{
struct crypto_tfm *tfm = crypto_hash_tfm(desc->tfm);
.module = THIS_MODULE,
};
-static int __init eseqiv_module_init(void)
+int __init eseqiv_module_init(void)
{
return crypto_register_template(&eseqiv_tmpl);
}
-static void __exit eseqiv_module_exit(void)
+void __exit eseqiv_module_exit(void)
{
crypto_unregister_template(&eseqiv_tmpl);
}
-
-module_init(eseqiv_module_init);
-module_exit(eseqiv_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Encrypted Sequence Number IV Generator");
unsigned int offset = sg[i].offset;
unsigned int slen = sg[i].length;
+ if (unlikely(slen > nbytes))
+ slen = nbytes;
+
+ nbytes -= slen;
+
while (slen > 0) {
unsigned int len = min(slen, ((unsigned int)(PAGE_SIZE)) - offset);
char *p = crypto_kmap(pg, 0) + offset;
offset = 0;
pg++;
}
- nbytes-=sg[i].length;
i++;
} while (nbytes>0);
}
struct sinfo {
- be128 t;
+ be128 *t;
struct crypto_tfm *tfm;
void (*fn)(struct crypto_tfm *, u8 *, const u8 *);
};
static inline void xts_round(struct sinfo *s, void *dst, const void *src)
{
- be128_xor(dst, &s->t, src); /* PP <- T xor P */
+ be128_xor(dst, s->t, src); /* PP <- T xor P */
s->fn(s->tfm, dst, dst); /* CC <- E(Key1,PP) */
- be128_xor(dst, dst, &s->t); /* C <- T xor CC */
+ be128_xor(dst, dst, s->t); /* C <- T xor CC */
}
static int crypt(struct blkcipher_desc *d,
.tfm = crypto_cipher_tfm(ctx->child),
.fn = fn
};
- be128 *iv;
u8 *wsrc;
u8 *wdst;
if (!w->nbytes)
return err;
+ s.t = (be128 *)w->iv;
avail = w->nbytes;
wsrc = w->src.virt.addr;
wdst = w->dst.virt.addr;
/* calculate first value of T */
- iv = (be128 *)w->iv;
- tw(crypto_cipher_tfm(ctx->tweak), (void *)&s.t, w->iv);
+ tw(crypto_cipher_tfm(ctx->tweak), w->iv, w->iv);
goto first;
for (;;) {
do {
- gf128mul_x_ble(&s.t, &s.t);
+ gf128mul_x_ble(s.t, s.t);
first:
xts_round(&s, wdst, wsrc);
If unsure, say N.
+config PATA_RB500
+ tristate "RouterBoard 500 PATA CompactFlash support"
+ depends on MIKROTIK_RB500
+ help
+ This option enables support for the RouterBoard 500
+ PATA CompactFlash controller.
+
+ If unsure, say N.
+
config PATA_RZ1000
tristate "PC Tech RZ1000 PATA support"
depends on PCI
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RADISYS) += pata_radisys.o
+obj-$(CONFIG_PATA_RB500) += pata_rb500_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SC1200) += pata_sc1200.o
obj-$(CONFIG_PATA_SERVERWORKS) += pata_serverworks.o
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
+ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
/* ap->flags bits */
static void ahci_p5wdh_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
+static void ahci_dev_config(struct ata_device *dev);
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
.check_altstatus = ahci_check_status,
.dev_select = ata_noop_dev_select,
+ .dev_config = ahci_dev_config,
+
.tf_read = ahci_tf_read,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
/* board_ahci_sb600 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
+ { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
cap &= ~HOST_CAP_NCQ;
}
- if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
+ if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
VPRINTK("HOST_CTL 0x%x\n", tmp);
}
+static void ahci_dev_config(struct ata_device *dev)
+{
+ struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
+
+ if (hpriv->flags & AHCI_HFLAG_SECT255)
+ dev->max_sectors = 255;
+}
+
static unsigned int ahci_dev_classify(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
- __FUNCTION__, ap->port_no);
+ __func__, ap->port_no);
/* _GTF has no input parameters */
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
"length or ptr is NULL (0x%llx, 0x%p)\n",
- __FUNCTION__,
+ __func__,
(unsigned long long)output.length,
output.pointer);
rc = -EINVAL;
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
"%s: returning gtf=%p, gtf_count=%d\n",
- __FUNCTION__, *gtf, rc);
+ __func__, *gtf, rc);
}
return rc;
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
- __FUNCTION__, dev->devno, ap->port_no);
+ __func__, dev->devno, ap->port_no);
/* Give the drive Identify data to the drive via the _SDD method */
/* _SDD: set up input parameters */
static int ata_force_tbl_size;
static char ata_force_param_buf[PAGE_SIZE] __initdata;
-module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0444);
+/* param_buf is thrown away after initialization, disallow read */
+module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
int atapi_enabled = 1;
cancel_rearming_delayed_work(&ap->port_task);
if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
}
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
int rc;
if (ata_msg_ctl(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
retry:
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
- __FUNCTION__);
+ __func__);
return 0;
}
if (ata_msg_probe(ap))
- ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
ata_dev_printk(dev, KERN_DEBUG,
"%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
"85:%04x 86:%04x 87:%04x 88:%04x\n",
- __FUNCTION__,
+ __func__,
id[49], id[82], id[83], id[84],
id[85], id[86], id[87], id[88]);
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: EXIT, drv_stat = 0x%x\n",
- __FUNCTION__, ata_chk_status(ap));
+ __func__, ata_chk_status(ap));
return 0;
err_out_nosup:
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG,
- "%s: EXIT, err\n", __FUNCTION__);
+ "%s: EXIT, err\n", __func__);
return rc;
}
ap->ops->set_piomode(ap, dev);
}
+ if (!softreset && !hardreset) {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "no reset method "
+ "available, skipping reset\n");
+ if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
+ lflags |= ATA_LFLAG_ASSUME_ATA;
+ goto done;
+ }
+
/* Determine which reset to use and record in ehc->i.action.
* prereset() may examine and modify it.
*/
lflags |= ATA_LFLAG_ASSUME_ATA;
}
+ done:
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Reset also wakes up
ap->ctl &= ~ATA_NIEN;
ap->last_ctl = ap->ctl;
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
tmp = ata_wait_idle(ap);
ap->ops->irq_clear(ap);
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- iowrite8(tf->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON(!ioaddr->ctl_addr);
iowrite8(tf->hob_feature, ioaddr->feature_addr);
iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
tf->device = ioread8(ioaddr->device_addr);
if (tf->flags & ATA_TFLAG_LBA48) {
- iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
- tf->hob_feature = ioread8(ioaddr->error_addr);
- tf->hob_nsect = ioread8(ioaddr->nsect_addr);
- tf->hob_lbal = ioread8(ioaddr->lbal_addr);
- tf->hob_lbam = ioread8(ioaddr->lbam_addr);
- tf->hob_lbah = ioread8(ioaddr->lbah_addr);
- iowrite8(tf->ctl, ioaddr->ctl_addr);
- ap->last_ctl = tf->ctl;
+ if (likely(ioaddr->ctl_addr)) {
+ iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+ tf->hob_feature = ioread8(ioaddr->error_addr);
+ tf->hob_nsect = ioread8(ioaddr->nsect_addr);
+ tf->hob_lbal = ioread8(ioaddr->lbal_addr);
+ tf->hob_lbam = ioread8(ioaddr->lbam_addr);
+ tf->hob_lbah = ioread8(ioaddr->lbah_addr);
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ } else
+ WARN_ON(1);
}
}
ap->ctl |= ATA_NIEN;
ap->last_ctl = ap->ctl;
- iowrite8(ap->ctl, ioaddr->ctl_addr);
+ if (ioaddr->ctl_addr)
+ iowrite8(ap->ctl, ioaddr->ctl_addr);
/* Under certain circumstances, some controllers raise IRQ on
* ATA_NIEN manipulation. Also, many controllers fail to mask
*/
void ata_bmdma_error_handler(struct ata_port *ap)
{
- ata_reset_fn_t hardreset;
+ ata_reset_fn_t softreset = NULL, hardreset = NULL;
- hardreset = NULL;
+ if (ap->ioaddr.ctl_addr)
+ softreset = ata_std_softreset;
if (sata_scr_valid(&ap->link))
hardreset = sata_std_hardreset;
- ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
+ ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset,
ata_std_postreset);
}
#include <linux/libata.h>
#define DRV_NAME "pata_hpt366"
-#define DRV_VERSION "0.6.1"
+#define DRV_VERSION "0.6.2"
struct hpt_clock {
u8 xfer_speed;
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA3", bad_ata66_3))
- mask &= ~(0x07 << ATA_SHIFT_UDMA);
+ mask &= ~(0xF8 << ATA_SHIFT_UDMA);
if (hpt_dma_blacklisted(adev, "UDMA4", bad_ata66_4))
- mask &= ~(0x0F << ATA_SHIFT_UDMA);
+ mask &= ~(0xF0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.9"
+#define DRV_VERSION "0.6.11"
struct hpt_clock {
u8 xfer_speed;
if (hpt_dma_blacklisted(adev, "UDMA", bad_ata33))
mask &= ~ATA_MASK_UDMA;
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
- mask &= ~(0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
{
if (adev->class == ATA_DEV_ATA) {
if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5))
- mask &= ~ (0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
#undef PDC_DEBUG
#ifdef PDC_DEBUG
-#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define PDPRINTK(fmt, args...)
#endif
--- /dev/null
+/*
+ * A low-level PATA driver to handle a Compact Flash connected on the
+ * Mikrotik's RouterBoard 532 board.
+ *
+ * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ *
+ * This file was based on: drivers/ata/pata_ixp4xx_cf.c
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * Also was based on the driver for Linux 2.4.xx published by Mikrotik for
+ * their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
+ * seems not to have a license.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <linux/libata.h>
+#include <scsi/scsi_host.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME "pata-rb500-cf"
+#define DRV_VERSION "0.1.0"
+#define DRV_DESC "PATA driver for RouterBOARD 532 Compact Flash"
+
+#define RB500_CF_MAXPORTS 1
+#define RB500_CF_IO_DELAY 400
+
+#define RB500_CF_REG_CMD 0x0800
+#define RB500_CF_REG_CTRL 0x080E
+#define RB500_CF_REG_DATA 0x0C00
+
+struct rb500_cf_info {
+ void __iomem *iobase;
+ unsigned int gpio_line;
+ int frozen;
+ unsigned int irq;
+};
+
+/* ------------------------------------------------------------------------ */
+
+static inline void rb500_pata_finish_io(struct ata_port *ap)
+{
+ struct ata_host *ah = ap->host;
+ struct rb500_cf_info *info = ah->private_data;
+
+ ata_altstatus(ap);
+ ndelay(RB500_CF_IO_DELAY);
+
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static void rb500_pata_exec_command(struct ata_port *ap,
+ const struct ata_taskfile *tf)
+{
+ writeb(tf->command, ap->ioaddr.command_addr);
+ rb500_pata_finish_io(ap);
+}
+
+static void rb500_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
+ unsigned int buflen, int write_data)
+{
+ struct ata_port *ap = adev->link->ap;
+ void __iomem *ioaddr = ap->ioaddr.data_addr;
+
+ if (write_data) {
+ for (; buflen > 0; buflen--, buf++)
+ writeb(*buf, ioaddr);
+ } else {
+ for (; buflen > 0; buflen--, buf++)
+ *buf = readb(ioaddr);
+ }
+
+ rb500_pata_finish_io(adev->link->ap);
+}
+
+static void rb500_pata_freeze(struct ata_port *ap)
+{
+ struct rb500_cf_info *info = ap->host->private_data;
+
+ info->frozen = 1;
+}
+
+static void rb500_pata_thaw(struct ata_port *ap)
+{
+ struct rb500_cf_info *info = ap->host->private_data;
+
+ info->frozen = 0;
+}
+
+static irqreturn_t rb500_pata_irq_handler(int irq, void *dev_instance)
+{
+ struct ata_host *ah = dev_instance;
+ struct rb500_cf_info *info = ah->private_data;
+
+ if (gpio_get_value(info->gpio_line)) {
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+ if (!info->frozen)
+ ata_interrupt(info->irq, dev_instance);
+ } else {
+ set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void rb500_pata_irq_clear(struct ata_port *ap)
+{
+}
+
+static int rb500_pata_port_start(struct ata_port *ap)
+{
+ return 0;
+}
+
+static struct ata_port_operations rb500_pata_port_ops = {
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+
+ .exec_command = rb500_pata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+
+ .data_xfer = rb500_pata_data_xfer,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+
+ .freeze = rb500_pata_freeze,
+ .thaw = rb500_pata_thaw,
+ .error_handler = ata_bmdma_error_handler,
+
+ .irq_handler = rb500_pata_irq_handler,
+ .irq_clear = rb500_pata_irq_clear,
+ .irq_on = ata_irq_on,
+
+ .port_start = rb500_pata_port_start,
+};
+
+/* ------------------------------------------------------------------------ */
+
+static struct scsi_host_template rb500_pata_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+ .proc_name = DRV_NAME,
+
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+};
+
+/* ------------------------------------------------------------------------ */
+
+static void rb500_pata_setup_ports(struct ata_host *ah)
+{
+ struct rb500_cf_info *info = ah->private_data;
+ struct ata_port *ap;
+
+ ap = ah->ports[0];
+
+ ap->ops = &rb500_pata_port_ops;
+ ap->pio_mask = 0x1f; /* PIO4 */
+ ap->flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
+
+ ap->ioaddr.cmd_addr = info->iobase + RB500_CF_REG_CMD;
+ ap->ioaddr.ctl_addr = info->iobase + RB500_CF_REG_CTRL;
+ ap->ioaddr.altstatus_addr = info->iobase + RB500_CF_REG_CTRL;
+
+ ata_std_ports(&ap->ioaddr);
+
+ ap->ioaddr.data_addr = info->iobase + RB500_CF_REG_DATA;
+}
+
+static __devinit int rb500_pata_driver_probe(struct platform_device *pdev)
+{
+ unsigned int irq;
+ int gpio;
+ struct resource *res;
+ struct ata_host *ah;
+ struct rb500_cf_info *info;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no IOMEM resource found\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "no IRQ resource found\n");
+ return -ENOENT;
+ }
+
+ gpio = irq_to_gpio(irq);
+ if (gpio < 0) {
+ dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
+ return -ENOENT;
+ }
+
+ ret = gpio_request(gpio, DRV_NAME);
+ if (ret) {
+ dev_err(&pdev->dev, "GPIO request failed\n");
+ return ret;
+ }
+
+ /* allocate host */
+ ah = ata_host_alloc(&pdev->dev, RB500_CF_MAXPORTS);
+ if (!ah)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, ah);
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ ah->private_data = info;
+ info->gpio_line = gpio;
+ info->irq = irq;
+
+ info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ if (!info->iobase)
+ return -ENOMEM;
+
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
+ ret);
+ goto err_free_gpio;
+ }
+
+ rb500_pata_setup_ports(ah);
+
+ ret = ata_host_activate(ah, irq, rb500_pata_irq_handler,
+ IRQF_TRIGGER_LOW, &rb500_pata_sht);
+ if (ret)
+ goto err_free_gpio;
+
+ return 0;
+
+err_free_gpio:
+ gpio_free(gpio);
+
+ return ret;
+}
+
+static __devexit int rb500_pata_driver_remove(struct platform_device *pdev)
+{
+ struct ata_host *ah = platform_get_drvdata(pdev);
+ struct rb500_cf_info *info = ah->private_data;
+
+ ata_host_detach(ah);
+ gpio_free(info->gpio_line);
+
+ return 0;
+}
+
+static struct platform_driver rb500_pata_platform_driver = {
+ .probe = rb500_pata_driver_probe,
+ .remove = __devexit_p(rb500_pata_driver_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/* ------------------------------------------------------------------------ */
+
+#define DRV_INFO DRV_DESC " version " DRV_VERSION
+
+static int __init rb500_pata_module_init(void)
+{
+ printk(KERN_INFO DRV_INFO "\n");
+
+ return platform_driver_register(&rb500_pata_platform_driver);
+}
+
+static void __exit rb500_pata_module_exit(void)
+{
+ platform_driver_unregister(&rb500_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+module_init(rb500_pata_module_init);
+module_exit(rb500_pata_module_exit);
for (i = 0; (p = csb_bad_ata100[i]) != NULL; i++) {
if (!strcmp(p, model_num))
- mask &= ~(0x1F << ATA_SHIFT_UDMA);
+ mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
return ata_pci_default_filter(adev, mask);
}
#define FS_DEBUG_QSIZE 0x00001000
-#define func_enter() fs_dprintk (FS_DEBUG_FLOW, "fs: enter %s\n", __FUNCTION__)
-#define func_exit() fs_dprintk (FS_DEBUG_FLOW, "fs: exit %s\n", __FUNCTION__)
+#define func_enter() fs_dprintk(FS_DEBUG_FLOW, "fs: enter %s\n", __func__)
+#define func_exit() fs_dprintk(FS_DEBUG_FLOW, "fs: exit %s\n", __func__)
static struct fs_dev *fs_boards = NULL;
#if 1
#define ASSERT(expr) if (!(expr)) { \
printk(FORE200E "assertion failed! %s[%d]: %s\n", \
- __FUNCTION__, __LINE__, #expr); \
- panic(FORE200E "%s", __FUNCTION__); \
+ __func__, __LINE__, #expr); \
+ panic(FORE200E "%s", __func__); \
}
#else
#define ASSERT(expr) do {} while (0)
struct vc_map *vc;
int i;
- printk("%s\n", __FUNCTION__);
+ printk("%s\n", __func__);
for (i = 0; i < card->tct_size; i++) {
vc = card->vcs[i];
if (!vc)
skb = sb_pool_skb(card, le32_to_cpu(rsqe->word_2));
if (skb == NULL) {
printk("%s: NULL skb in %s, rsqe: %08x %08x %08x %08x\n",
- card->name, __FUNCTION__,
+ card->name, __func__,
le32_to_cpu(rsqe->word_1), le32_to_cpu(rsqe->word_2),
le32_to_cpu(rsqe->word_3), le32_to_cpu(rsqe->word_4));
return;
return;
if (sb_pool_add(card, skb, queue)) {
- printk("%s: SB POOL full\n", __FUNCTION__);
+ printk("%s: SB POOL full\n", __func__);
goto outfree;
}
IDT77252_PRV_PADDR(skb) = paddr;
if (push_rx_skb(card, skb, queue)) {
- printk("%s: FB QUEUE full\n", __FUNCTION__);
+ printk("%s: FB QUEUE full\n", __func__);
goto outunmap;
}
}
{
struct sk_buff *skb;
- printk("%s: at %p\n", __FUNCTION__, idt77252_init);
+ printk("%s: at %p\n", __func__, idt77252_init);
if (sizeof(skb->cb) < sizeof(struct atm_skb_data) +
sizeof(struct idt77252_skb_prv)) {
printk(KERN_ERR "%s: skb->cb is too small (%lu < %lu)\n",
- __FUNCTION__, (unsigned long) sizeof(skb->cb),
+ __func__, (unsigned long) sizeof(skb->cb),
(unsigned long) sizeof(struct atm_skb_data) +
sizeof(struct idt77252_skb_prv));
return -EIO;
high_totalram += high_totalram - 1;
mask = (((u64)high_totalram) << 32) + 0xffffffff;
}
- return mask & *dev->dma_mask;
+ return mask;
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
#endif
pr_debug("Registering sysdev class '%s'\n",
kobject_name(&cls->kset.kobj));
INIT_LIST_HEAD(&cls->drivers);
+ memset(&cls->kset.kobj, 0x00, sizeof(struct kobject));
cls->kset.kobj.parent = &system_kset->kobj;
cls->kset.kobj.ktype = &ktype_sysdev_class;
cls->kset.kobj.kset = system_kset;
pr_debug("Registering sys device '%s'\n", kobject_name(&sysdev->kobj));
+ /* initialize the kobject to 0, in case it had previously been used */
+ memset(&sysdev->kobj, 0x00, sizeof(struct kobject));
+
/* Make sure the kset is set */
sysdev->kobj.kset = &cls->kset;
numsg = VIOMAXBLOCKDMA;
*total_len = 0;
- memset(sg, 0, sizeof(sg[0]) * VIOMAXBLOCKDMA);
-
+ sg_init_table(sg, VIOMAXBLOCKDMA);
for (i = 0; (i < numsg) && (rw_data->dma_info[i].len > 0); ++i) {
sg_dma_address(&sg[i]) = rw_data->dma_info[i].token;
sg_dma_len(&sg[i]) = rw_data->dma_info[i].len;
{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
/* Broadcom BCM2045 */
+ { USB_DEVICE(0x0a5c, 0x2039), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x2101), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
/* IBM/Lenovo ThinkPad with Broadcom chip */
{ USB_DEVICE(0x0400, 0x0807), .driver_info = HCI_BROKEN_ISOC },
{ USB_DEVICE(0x0400, 0x080a), .driver_info = HCI_BROKEN_ISOC },
+ /* CONWISE Technology based adapters with buggy SCO support */
+ { USB_DEVICE(0x0e5e, 0x6622), .driver_info = HCI_BROKEN_ISOC },
+
/* Belkin F8T012 and F8T013 devices */
{ USB_DEVICE(0x050d, 0x0012), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
{ USB_DEVICE(0x050d, 0x0013), .driver_info = HCI_RESET | HCI_WRONG_SCO_MTU },
return 0;
}
+ spin_lock_init(&info->lock);
/* rx_trigger, tx_trigger are needed by autoconfig */
info->config.rx_trigger = rx_trigger;
info->config.tx_trigger = tx_trigger;
F32_8 = 8192, /* 3072 bytes downl. + 1024 bytes uplink * 2 -> 8192 */
};
+/* Initialization states a card can be in */
+enum card_state {
+ NOZOMI_STATE_UKNOWN = 0,
+ NOZOMI_STATE_ENABLED = 1, /* pci device enabled */
+ NOZOMI_STATE_ALLOCATED = 2, /* config setup done */
+ NOZOMI_STATE_READY = 3, /* flowcontrols received */
+};
+
/* Two different toggle channels exist */
enum channel_type {
CH_A = 0,
spinlock_t spin_mutex; /* secures access to registers and tty */
unsigned int index_start;
+ enum card_state state;
u32 open_ttys;
};
dc->last_ier = dc->last_ier | CTRL_DL;
writew(dc->last_ier, dc->reg_ier);
+ dc->state = NOZOMI_STATE_ALLOCATED;
dev_info(&dc->pdev->dev, "Initialization OK!\n");
return 1;
}
case CTRL_APP2:
port = PORT_APP2;
enable_ier = APP2_DL;
+ if (dc->state == NOZOMI_STATE_ALLOCATED) {
+ /*
+ * After card initialization the flow control
+ * received for APP2 is always the last
+ */
+ dc->state = NOZOMI_STATE_READY;
+ dev_info(&dc->pdev->dev, "Device READY!\n");
+ }
break;
default:
dev_err(&dc->pdev->dev,
dc->pdev = pdev;
- /* Find out what card type it is */
- nozomi_get_card_type(dc);
-
ret = pci_enable_device(dc->pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to enable PCI Device\n");
goto err_free;
}
- start = pci_resource_start(dc->pdev, 0);
- if (start == 0) {
- dev_err(&pdev->dev, "No I/O address for card detected\n");
- ret = -ENODEV;
- goto err_disable_device;
- }
-
ret = pci_request_regions(dc->pdev, NOZOMI_NAME);
if (ret) {
dev_err(&pdev->dev, "I/O address 0x%04x already in use\n",
goto err_disable_device;
}
+ start = pci_resource_start(dc->pdev, 0);
+ if (start == 0) {
+ dev_err(&pdev->dev, "No I/O address for card detected\n");
+ ret = -ENODEV;
+ goto err_rel_regs;
+ }
+
+ /* Find out what card type it is */
+ nozomi_get_card_type(dc);
+
dc->base_addr = ioremap(start, dc->card_type);
if (!dc->base_addr) {
dev_err(&pdev->dev, "Unable to map card MMIO\n");
dc->index_start = ndev_idx * MAX_PORT;
ndevs[ndev_idx] = dc;
+ pci_set_drvdata(pdev, dc);
+
+ /* Enable RESET interrupt */
+ dc->last_ier = RESET;
+ iowrite16(dc->last_ier, dc->reg_ier);
+
+ dc->state = NOZOMI_STATE_ENABLED;
+
for (i = 0; i < MAX_PORT; i++) {
mutex_init(&dc->port[i].tty_sem);
dc->port[i].tty_open_count = 0;
&pdev->dev);
}
- /* Enable RESET interrupt. */
- dc->last_ier = RESET;
- writew(dc->last_ier, dc->reg_ier);
-
- pci_set_drvdata(pdev, dc);
-
return 0;
err_free_sbuf:
struct nozomi *dc = get_dc_by_tty(tty);
unsigned long flags;
- if (!port || !dc)
+ if (!port || !dc || dc->state != NOZOMI_STATE_READY)
return -ENODEV;
if (mutex_lock_interruptible(&port->tty_sem))
static int ntty_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct nozomi *dc = get_dc_by_tty(tty);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dc->spin_mutex, flags);
if (set & TIOCM_RTS)
set_rts(tty, 1);
else if (clear & TIOCM_RTS)
set_dtr(tty, 1);
else if (clear & TIOCM_DTR)
set_dtr(tty, 0);
+ spin_unlock_irqrestore(&dc->spin_mutex, flags);
return 0;
}
icount.brk = cnow.brk;
icount.buf_overrun = cnow.buf_overrun;
- return copy_to_user(argp, &icount, sizeof(icount));
+ return copy_to_user(argp, &icount, sizeof(icount)) ? -EFAULT : 0;
}
static int ntty_ioctl(struct tty_struct *tty, struct file *file,
static void rc_release_drivers(void)
{
- unsigned long flags;
-
- spin_lock_irqsave(&riscom_lock, flags);
-
tty_unregister_driver(riscom_driver);
put_tty_driver(riscom_driver);
-
- spin_unlock_irqrestore(&riscom_lock, flags);
}
#ifndef MODULE
{
struct cpufreq_policy * policy = to_policy(kobj);
struct freq_attr * fattr = to_attr(attr);
- ssize_t ret;
+ ssize_t ret = -EINVAL;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
- return -EINVAL;
+ goto no_policy;
if (lock_policy_rwsem_read(policy->cpu) < 0)
- return -EINVAL;
+ goto fail;
if (fattr->show)
ret = fattr->show(policy, buf);
ret = -EIO;
unlock_policy_rwsem_read(policy->cpu);
-
+fail:
cpufreq_cpu_put(policy);
+no_policy:
return ret;
}
{
struct cpufreq_policy * policy = to_policy(kobj);
struct freq_attr * fattr = to_attr(attr);
- ssize_t ret;
+ ssize_t ret = -EINVAL;
policy = cpufreq_cpu_get(policy->cpu);
if (!policy)
- return -EINVAL;
+ goto no_policy;
if (lock_policy_rwsem_write(policy->cpu) < 0)
- return -EINVAL;
+ goto fail;
if (fattr->store)
ret = fattr->store(policy, buf, count);
ret = -EIO;
unlock_policy_rwsem_write(policy->cpu);
-
+fail:
cpufreq_cpu_put(policy);
+no_policy:
return ret;
}
return NOTIFY_OK;
}
-static struct notifier_block __cpuinitdata cpufreq_cpu_notifier =
+static struct notifier_block __refdata cpufreq_cpu_notifier =
{
.notifier_call = cpufreq_cpu_callback,
};
return NOTIFY_OK;
}
-static struct notifier_block cpufreq_stat_cpu_notifier __cpuinitdata =
+static struct notifier_block cpufreq_stat_cpu_notifier __refdata =
{
.notifier_call = cpufreq_stat_cpu_callback,
};
gc->direction_output = pca953x_gpio_direction_output;
gc->get = pca953x_gpio_get_value;
gc->set = pca953x_gpio_set_value;
+ gc->can_sleep = 1;
gc->base = chip->gpio_start;
gc->ngpio = gpios;
u8 temp;
/* driver_data might come from user-space, so check it */
- if (id->driver_data > ARRAY_SIZE(chipname))
+ if (id->driver_data >= ARRAY_SIZE(chipname))
return -EINVAL;
if (amd756_ioport) {
#
# Makefile for miscellaneous I2C chip drivers.
#
+# Think twice before you add a new driver to this directory.
+# Device drivers are better grouped according to the functionality they
+# implement rather than to the bus they are connected to. In particular:
+# * Hardware monitoring chip drivers go to drivers/hwmon
+# * RTC chip drivers go to drivers/rtc
+# * I/O expander drivers go to drivers/gpio
+#
obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
{
struct i2c_client *client = to_i2c_client(dev);
struct i2c_driver *driver = to_i2c_driver(dev->driver);
+ int status;
if (!driver->probe)
return -ENODEV;
client->driver = driver;
dev_dbg(dev, "probe\n");
- return driver->probe(client);
+ status = driver->probe(client);
+ if (status)
+ client->driver = NULL;
+ return status;
}
static int i2c_device_remove(struct device *dev)
To compile this driver as a module, choose M here: the
module will be called ide.
- For further information, please read <file:Documentation/ide.txt>.
+ For further information, please read <file:Documentation/ide/ide.txt>.
If unsure, say Y.
Useful information about large (>540 MB) IDE disks, multiple
interfaces, what to do if ATA/IDE devices are not automatically
detected, sound card ATA/IDE ports, module support, and other
- topics, is contained in <file:Documentation/ide.txt>. For detailed
+ topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
information about hard drives, consult the Disk-HOWTO and the
Multi-Disk-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
<ftp://ibiblio.org/pub/Linux/system/hardware/>.
To compile this driver as a module, choose M here and read
- <file:Documentation/ide.txt>. The module will be called ide-mod.
+ <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
Do not compile this driver as a module if your root file system (the
one containing the directory /) is located on an IDE device.
if BLK_DEV_IDE
-comment "Please see Documentation/ide.txt for help/info on IDE drives"
+comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
along with other IDE devices, as "hdb" or "hdc", or something
similar, and will be mapped to a character device such as "ht0"
(check the boot messages with dmesg). Be sure to consult the
- <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
- for usage information.
+ <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
+ files for usage information.
To compile this driver as a module, choose M here: the
module will be called ide-tape.
The CMD640 chip is also used on add-in cards by Acculogic, and on
the "CSA-6400E PCI to IDE controller" that some people have. For
- details, read <file:Documentation/ide.txt>.
+ details, read <file:Documentation/ide/ide.txt>.
config BLK_DEV_CMD640_ENHANCED
bool "CMD640 enhanced support"
help
This option includes support for setting/autotuning PIO modes and
prefetch on CMD640 IDE interfaces. For details, read
- <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+ <file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
and your BIOS does not already do this for you, then say Y here.
Otherwise say N.
This driver is enabled at runtime using the "ali14xx.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
- I/O speeds to be set as well. See the files
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c>
- for more info.
+ I/O speeds to be set as well.
+ See the files <file:Documentation/ide/ide.txt> and
+ <file:drivers/ide/legacy/ali14xx.c> for more info.
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
This driver is enabled at runtime using the "dtc2278.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the DTC-2278 card, and permits faster I/O speeds to be set as
- well. See the <file:Documentation/ide.txt> and
+ well. See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/dtc2278.c> files for more info.
config BLK_DEV_HT6560B
This driver is enabled at runtime using the "ht6560b.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the Holtek card, and permits faster I/O speeds to be set as well.
- See the <file:Documentation/ide.txt> and
+ See the <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/ht6560b.c> files for more info.
config BLK_DEV_QD65XX
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
- <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
+ <file:Documentation/ide/ide.txt> and <file:drivers/ide/legacy/qd65xx.c>
for more info.
config BLK_DEV_UMC8672
This driver is enabled at runtime using the "umc8672.probe" kernel
boot parameter. It enables support for the secondary IDE interface
of the UMC-8672, and permits faster I/O speeds to be set as well.
- See the files <file:Documentation/ide.txt> and
+ See the files <file:Documentation/ide/ide.txt> and
<file:drivers/ide/legacy/umc8672.c> for more info.
endif
layer. the packet must be complete, as we do not
touch it at all. */
ide_cd_init_rq(drive, &req);
+
+ if (cgc->data_direction == CGC_DATA_WRITE)
+ req.cmd_flags |= REQ_RW;
+
memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
if (cgc->sense)
memset(cgc->sense, 0, sizeof(struct request_sense));
}
if (hwif->host_flags & IDE_HFLAG_NO_SET_MODE)
- return 0;
+ return 1;
if (ide_set_dma_mode(drive, speed))
return 0;
do {
hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]);
- index = hwif->index;
if (hwif)
goto found;
for (index = 0; index < MAX_HWIFS; index++)
} while (retry--);
return -1;
found:
+ index = hwif->index;
if (hwif->present)
ide_unregister(index, 0, 1);
else if (!hwif->hold)
* ide_setup() gets called VERY EARLY during initialization,
* to handle kernel "command line" strings beginning with "hdx=" or "ide".
*
- * Remember to update Documentation/ide.txt if you change something here.
+ * Remember to update Documentation/ide/ide.txt if you change something here.
*/
static int __init ide_setup(char *s)
{
port = cm_dev->port[i-1];
ib_modify_port(device, port->port_num, 0, &port_modify);
ib_unregister_mad_agent(port->mad_agent);
+ flush_workqueue(cm.wq);
cm_remove_port_fs(port);
}
kobject_put(&cm_dev->dev_obj);
cancel_delayed_work(&timewait_info->work.work);
spin_unlock_irq(&cm.lock);
+ ib_unregister_client(&cm_client);
destroy_workqueue(cm.wq);
list_for_each_entry_safe(timewait_info, tmp, &cm.timewait_list, list) {
kfree(timewait_info);
}
- ib_unregister_client(&cm_client);
class_unregister(&cm_class);
idr_destroy(&cm.local_id_table);
}
static void ib_fmr_batch_release(struct ib_fmr_pool *pool)
{
int ret;
- struct ib_pool_fmr *fmr, *next;
+ struct ib_pool_fmr *fmr;
LIST_HEAD(unmap_list);
LIST_HEAD(fmr_list);
#endif
}
- /*
- * The free_list may hold FMRs that have been put there
- * because they haven't reached the max_remap count.
- * Invalidate their mapping as well.
- */
- list_for_each_entry_safe(fmr, next, &pool->free_list, list) {
- if (fmr->remap_count == 0)
- continue;
- hlist_del_init(&fmr->cache_node);
- fmr->remap_count = 0;
- list_add_tail(&fmr->fmr->list, &fmr_list);
- list_move(&fmr->list, &unmap_list);
- }
-
list_splice(&pool->dirty_list, &unmap_list);
INIT_LIST_HEAD(&pool->dirty_list);
pool->dirty_len = 0;
i = 0;
list_for_each_entry_safe(fmr, tmp, &pool->free_list, list) {
+ if (fmr->remap_count) {
+ INIT_LIST_HEAD(&fmr_list);
+ list_add_tail(&fmr->fmr->list, &fmr_list);
+ ib_unmap_fmr(&fmr_list);
+ }
ib_dealloc_fmr(fmr->fmr);
list_del(&fmr->list);
kfree(fmr);
*/
int ib_flush_fmr_pool(struct ib_fmr_pool *pool)
{
- int serial = atomic_inc_return(&pool->req_ser);
+ int serial;
+ struct ib_pool_fmr *fmr, *next;
+
+ /*
+ * The free_list holds FMRs that may have been used
+ * but have not been remapped enough times to be dirty.
+ * Put them on the dirty list now so that the cleanup
+ * thread will reap them too.
+ */
+ spin_lock_irq(&pool->pool_lock);
+ list_for_each_entry_safe(fmr, next, &pool->free_list, list) {
+ if (fmr->remap_count > 0)
+ list_move(&fmr->list, &pool->dirty_list);
+ }
+ spin_unlock_irq(&pool->pool_lock);
+ serial = atomic_inc_return(&pool->req_ser);
wake_up_process(pool->thread);
if (wait_event_interruptible(pool->force_wait,
unsigned long flags;
int empty;
int ret = 0;
+ int destroy_id;
spin_lock_irqsave(&cm_id_priv->lock, flags);
empty = list_empty(&cm_id_priv->work_list);
destroy_cm_id(&cm_id_priv->id);
}
BUG_ON(atomic_read(&cm_id_priv->refcount)==0);
+ destroy_id = test_bit(IWCM_F_CALLBACK_DESTROY, &cm_id_priv->flags);
if (iwcm_deref_id(cm_id_priv)) {
- if (test_bit(IWCM_F_CALLBACK_DESTROY,
- &cm_id_priv->flags)) {
+ if (destroy_id) {
BUG_ON(!list_empty(&cm_id_priv->work_list));
free_cm_id(cm_id_priv);
}
return ERR_PTR(-ENOMEM);
}
chp->rhp = rhp;
- chp->ibcq.cqe = (1 << chp->cq.size_log2) - 1;
+ chp->ibcq.cqe = 1 << chp->cq.size_log2;
spin_lock_init(&chp->lock);
atomic_set(&chp->refcnt, 1);
init_waitqueue_head(&chp->wait);
kfree(qhp);
return ERR_PTR(-ENOMEM);
}
+
attrs->cap.max_recv_wr = rqsize - 1;
attrs->cap.max_send_wr = sqsize;
+ attrs->cap.max_inline_data = T3_MAX_INLINE;
+
qhp->rhp = rhp;
qhp->attr.pd = php->pdid;
qhp->attr.scq = ((struct iwch_cq *) attrs->send_cq)->cq.cqid;
static
struct iser_device *iser_device_find_by_ib_device(struct rdma_cm_id *cma_id)
{
- struct list_head *p_list;
- struct iser_device *device = NULL;
+ struct iser_device *device;
mutex_lock(&ig.device_list_mutex);
- p_list = ig.device_list.next;
- while (p_list != &ig.device_list) {
- device = list_entry(p_list, struct iser_device, ig_list);
+ list_for_each_entry(device, &ig.device_list, ig_list)
/* find if there's a match using the node GUID */
if (device->ib_device->node_guid == cma_id->device->node_guid)
- break;
- }
+ goto inc_refcnt;
- if (device == NULL) {
- device = kzalloc(sizeof *device, GFP_KERNEL);
- if (device == NULL)
- goto out;
- /* assign this device to the device */
- device->ib_device = cma_id->device;
- /* init the device and link it into ig device list */
- if (iser_create_device_ib_res(device)) {
- kfree(device);
- device = NULL;
- goto out;
- }
- list_add(&device->ig_list, &ig.device_list);
+ device = kzalloc(sizeof *device, GFP_KERNEL);
+ if (device == NULL)
+ goto out;
+
+ /* assign this device to the device */
+ device->ib_device = cma_id->device;
+ /* init the device and link it into ig device list */
+ if (iser_create_device_ib_res(device)) {
+ kfree(device);
+ device = NULL;
+ goto out;
}
-out:
- BUG_ON(device == NULL);
+ list_add(&device->ig_list, &ig.device_list);
+
+inc_refcnt:
device->refcount++;
+out:
mutex_unlock(&ig.device_list_mutex);
return device;
}
int ret;
device = iser_device_find_by_ib_device(cma_id);
+ if (!device) {
+ iser_err("device lookup/creation failed\n");
+ iser_connect_error(cma_id);
+ return;
+ }
+
ib_conn = (struct iser_conn *)cma_id->context;
ib_conn->device = device;
iser_err("resolve route failed: %d\n", ret);
iser_connect_error(cma_id);
}
- return;
}
static void iser_route_handler(struct rdma_cm_id *cma_id)
#if defined(CONFIG_MACH_JAZZ)
#include "i8042-jazzio.h"
-#elif defined(CONFIG_SGI_IP22)
+#elif defined(CONFIG_SGI_HAS_I8042)
#include "i8042-ip22io.h"
#elif defined(CONFIG_PPC)
#include "i8042-ppcio.h"
err("maximum number of devices exceeded");
return NULL;
}
- mutex_init(&cs->mutex);
gig_dbg(DEBUG_INIT, "allocating bcs[0..%d]", channels - 1);
cs->bcs = kmalloc(channels * sizeof(struct bc_state), GFP_KERNEL);
{
mutex_lock(&cs->mutex);
- if (!(cs->flags & VALID_MINOR))
+ if (!(cs->flags & VALID_MINOR)) {
+ mutex_unlock(&cs->mutex);
return -1;
+ }
cs->waiting = 1;
drv->cs[i].driver = drv;
drv->cs[i].ops = drv->ops;
drv->cs[i].minor_index = i;
+ mutex_init(&drv->cs[i].mutex);
}
gigaset_if_initdriver(drv, procname, devname);
}
-static __inline int
+static inline int
isdn_minor2drv(int minor)
{
return (dev->drvmap[minor]);
}
-static __inline int
+static inline int
isdn_minor2chan(int minor)
{
return (dev->chanmap[minor]);
* and to 67452301 when keylen = 2. This is necessary because ordering on
* the isdn line is the other way.
*/
-static __inline unsigned char
+static inline unsigned char
FlipBits(unsigned char c, int keylen)
{
unsigned char b = c;
switcher_page[i] = virt_to_page(addr);
}
+ /* First we check that the Switcher won't overlap the fixmap area at
+ * the top of memory. It's currently nowhere near, but it could have
+ * very strange effects if it ever happened. */
+ if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
+ err = -ENOMEM;
+ printk("lguest: mapping switcher would thwack fixmap\n");
+ goto free_pages;
+ }
+
/* Now we reserve the "virtual memory area" we want: 0xFFC00000
* (SWITCHER_ADDR). We might not get it in theory, but in practice
- * it's worked so far. */
+ * it's worked so far. The end address needs +1 because __get_vm_area
+ * allocates an extra guard page, so we need space for that. */
switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
- VM_ALLOC, SWITCHER_ADDR, VMALLOC_END);
+ VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
+ + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
if (!switcher_vma) {
err = -ENOMEM;
printk("lguest: could not map switcher pages high\n");
cpu = &lg->cpus[cpu_id];
if (!cpu)
return -EINVAL;
- }
- /* Once the Guest is dead, all you can do is read() why it died. */
- if (lg && lg->dead)
- return -ENOENT;
+ /* Once the Guest is dead, you can only read() why it died. */
+ if (lg->dead)
+ return -ENOENT;
- /* If you're not the task which owns the Guest, you can only break */
- if (lg && current != cpu->tsk && req != LHREQ_BREAK)
- return -EPERM;
+ /* If you're not the task which owns the Guest, all you can do
+ * is break the Launcher out of running the Guest. */
+ if (current != cpu->tsk && req != LHREQ_BREAK)
+ return -EPERM;
+ }
switch (req) {
case LHREQ_INITIALIZE:
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(lg->pgdirs); i++)
- if (lg->pgdirs[i].gpgdir == pgtable)
+ if (lg->pgdirs[i].pgdir && lg->pgdirs[i].gpgdir == pgtable)
break;
return i;
}
static struct backlight_ops pmu_backlight_data;
static DEFINE_SPINLOCK(pmu_backlight_lock);
-static int sleeping;
+static int sleeping, uses_pmu_bl;
static u8 bl_curve[FB_BACKLIGHT_LEVELS];
static void pmu_backlight_init_curve(u8 off, u8 min, u8 max)
spin_lock_irqsave(&pmu_backlight_lock, flags);
sleeping = sleep;
- if (pmac_backlight) {
+ if (pmac_backlight && uses_pmu_bl) {
if (sleep) {
struct adb_request req;
printk(KERN_ERR "PMU Backlight registration failed\n");
return;
}
+ uses_pmu_bl = 1;
bd->props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
pmu_backlight_init_curve(0x7F, 0x46, 0x0E);
EXPORT_SYMBOL(pmu_suspend);
EXPORT_SYMBOL(pmu_resume);
EXPORT_SYMBOL(pmu_unlock);
-#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+#if defined(CONFIG_PPC32)
EXPORT_SYMBOL(pmu_enable_irled);
EXPORT_SYMBOL(pmu_battery_count);
EXPORT_SYMBOL(pmu_batteries);
if (bitmap == NULL)
return;
if (time_before(jiffies, bitmap->daemon_lastrun + bitmap->daemon_sleep*HZ))
- return;
+ goto done;
+
bitmap->daemon_lastrun = jiffies;
if (bitmap->allclean) {
bitmap->mddev->thread->timeout = MAX_SCHEDULE_TIMEOUT;
}
}
+ done:
if (bitmap->allclean == 0)
bitmap->mddev->thread->timeout = bitmap->daemon_sleep * HZ;
}
if (mddev->ro==1)
seq_printf(seq, " (read-only)");
if (mddev->ro==2)
- seq_printf(seq, "(auto-read-only)");
+ seq_printf(seq, " (auto-read-only)");
seq_printf(seq, " %s", mddev->pers->name);
}
Sony MemoryStick is a proprietary storage/extension card protocol.
If you want MemoryStick support, you should say Y here and also
- to the specific driver for your MMC interface.
+ to the specific driver for your MemoryStick interface.
if MEMSTICK
#include <linux/delay.h>
#define DRIVER_NAME "memstick"
-#define DRIVER_VERSION "0.2"
static unsigned int cmd_retries = 3;
module_param(cmd_retries, uint, 0644);
rc = host->card->next_request(host->card, mrq);
if (!rc)
- host->retries = cmd_retries;
+ host->retries = cmd_retries > 1 ? cmd_retries - 1 : 1;
else
*mrq = NULL;
mrq->data_dir = READ;
mrq->sg = *sg;
- mrq->io_type = MEMSTICK_IO_SG;
+ mrq->long_data = 1;
if (tpc == MS_TPC_SET_CMD || tpc == MS_TPC_EX_SET_CMD)
mrq->need_card_int = 1;
if (mrq->data_dir == WRITE)
memcpy(mrq->data, buf, mrq->data_len);
- mrq->io_type = MEMSTICK_IO_VAL;
+ mrq->long_data = 0;
if (tpc == MS_TPC_SET_CMD || tpc == MS_TPC_EX_SET_CMD)
mrq->need_card_int = 1;
}
EXPORT_SYMBOL(memstick_free_host);
+/**
+ * memstick_suspend_host - notify bus driver of host suspension
+ * @host - host to use
+ */
+void memstick_suspend_host(struct memstick_host *host)
+{
+ mutex_lock(&host->lock);
+ host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
+ mutex_unlock(&host->lock);
+}
+EXPORT_SYMBOL(memstick_suspend_host);
+
+/**
+ * memstick_resume_host - notify bus driver of host resumption
+ * @host - host to use
+ */
+void memstick_resume_host(struct memstick_host *host)
+{
+ mutex_lock(&host->lock);
+ host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
+ mutex_unlock(&host->lock);
+ memstick_detect_change(host);
+}
+EXPORT_SYMBOL(memstick_resume_host);
+
int memstick_register_driver(struct memstick_driver *drv)
{
drv->driver.bus = &memstick_bus_type;
MODULE_AUTHOR("Alex Dubov");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Sony MemoryStick core driver");
-MODULE_VERSION(DRIVER_VERSION);
#include <linux/idr.h>
#include <linux/hdreg.h>
#include <linux/kthread.h>
+#include <linux/delay.h>
#include <linux/memstick.h>
#define DRIVER_NAME "mspro_block"
-#define DRIVER_VERSION "0.2"
static int major;
module_param(major, int, 0644);
unsigned int sectors_per_partition;
} __attribute__((packed));
+struct mspro_specfile {
+ char name[8];
+ char ext[3];
+ unsigned char attr;
+ unsigned char reserved[10];
+ unsigned short time;
+ unsigned short date;
+ unsigned short cluster;
+ unsigned int size;
+} __attribute__((packed));
+
struct mspro_devinfo {
unsigned short cylinders;
unsigned short heads;
dev_attr);
struct mspro_sys_info *x_sys = x_attr->data;
ssize_t rc = 0;
+ int date_tz = 0, date_tz_f = 0;
+
+ if (x_sys->assembly_date[0] > 0x80U) {
+ date_tz = (~x_sys->assembly_date[0]) + 1;
+ date_tz_f = date_tz & 3;
+ date_tz >>= 2;
+ date_tz = -date_tz;
+ date_tz_f *= 15;
+ } else if (x_sys->assembly_date[0] < 0x80U) {
+ date_tz = x_sys->assembly_date[0];
+ date_tz_f = date_tz & 3;
+ date_tz >>= 2;
+ date_tz_f *= 15;
+ }
rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "class: %x\n",
x_sys->class);
rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "page size: %x\n",
be16_to_cpu(x_sys->page_size));
rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "assembly date: "
- "%d %04u-%02u-%02u %02u:%02u:%02u\n",
- x_sys->assembly_date[0],
+ "GMT%+d:%d %04u-%02u-%02u %02u:%02u:%02u\n",
+ date_tz, date_tz_f,
be16_to_cpu(*(unsigned short *)
&x_sys->assembly_date[1]),
x_sys->assembly_date[3], x_sys->assembly_date[4],
return rc;
}
+static ssize_t mspro_block_attr_show_specfile(struct device *dev,
+ struct device_attribute *attr,
+ char *buffer)
+{
+ struct mspro_sys_attr *x_attr = container_of(attr,
+ struct mspro_sys_attr,
+ dev_attr);
+ struct mspro_specfile *x_spfile = x_attr->data;
+ char name[9], ext[4];
+ ssize_t rc = 0;
+
+ memcpy(name, x_spfile->name, 8);
+ name[8] = 0;
+ memcpy(ext, x_spfile->ext, 3);
+ ext[3] = 0;
+
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "name: %s\n", name);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "ext: %s\n", ext);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "attribute: %x\n",
+ x_spfile->attr);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "time: %d:%d:%d\n",
+ x_spfile->time >> 11,
+ (x_spfile->time >> 5) & 0x3f,
+ (x_spfile->time & 0x1f) * 2);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "date: %d-%d-%d\n",
+ (x_spfile->date >> 9) + 1980,
+ (x_spfile->date >> 5) & 0xf,
+ x_spfile->date & 0x1f);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "start cluster: %x\n",
+ x_spfile->cluster);
+ rc += scnprintf(buffer + rc, PAGE_SIZE - rc, "size: %x\n",
+ x_spfile->size);
+ return rc;
+}
+
static ssize_t mspro_block_attr_show_devinfo(struct device *dev,
struct device_attribute *attr,
char *buffer)
return mspro_block_attr_show_modelname;
case MSPRO_BLOCK_ID_MBR:
return mspro_block_attr_show_mbr;
+ case MSPRO_BLOCK_ID_SPECFILEVALUES1:
+ case MSPRO_BLOCK_ID_SPECFILEVALUES2:
+ return mspro_block_attr_show_specfile;
case MSPRO_BLOCK_ID_DEVINFO:
return mspro_block_attr_show_devinfo;
default:
param.system = msb->system;
param.data_count = cpu_to_be16(page_count);
param.data_address = cpu_to_be32((uint32_t)t_sec);
- param.cmd_param = 0;
+ param.tpc_param = 0;
msb->data_dir = rq_data_dir(req);
msb->transfer_cmd = msb->data_dir == READ
struct memstick_host *host = card->host;
struct mspro_block_data *msb = memstick_get_drvdata(card);
struct mspro_param_register param = {
- .system = 0,
+ .system = MEMSTICK_SYS_PAR4,
.data_count = 0,
.data_address = 0,
- .cmd_param = 0
+ .tpc_param = 0
};
card->next_request = h_mspro_block_req_init;
if (card->current_mrq.error)
return card->current_mrq.error;
- msb->system = 0;
- host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PARALLEL);
+ msb->system = MEMSTICK_SYS_PAR4;
+ host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_PAR4);
card->next_request = h_mspro_block_req_init;
msb->mrq_handler = h_mspro_block_default;
wait_for_completion(&card->mrq_complete);
if (card->current_mrq.error) {
- msb->system = 0x80;
+ msb->system = MEMSTICK_SYS_SERIAL;
+ host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_OFF);
+ msleep(1000);
+ host->set_param(host, MEMSTICK_POWER, MEMSTICK_POWER_ON);
host->set_param(host, MEMSTICK_INTERFACE, MEMSTICK_SERIAL);
+
+ if (memstick_set_rw_addr(card))
+ return card->current_mrq.error;
+
+ param.system = msb->system;
+
+ card->next_request = h_mspro_block_req_init;
+ msb->mrq_handler = h_mspro_block_default;
+ memstick_init_req(&card->current_mrq, MS_TPC_WRITE_REG, ¶m,
+ sizeof(param));
+ memstick_new_req(host);
+ wait_for_completion(&card->mrq_complete);
+
return -EFAULT;
}
.system = msb->system,
.data_count = cpu_to_be16(1),
.data_address = 0,
- .cmd_param = 0
+ .tpc_param = 0
};
struct mspro_attribute *attr = NULL;
struct mspro_sys_attr *s_attr = NULL;
param.system = msb->system;
param.data_count = cpu_to_be16((rc / msb->page_size) + 1);
param.data_address = cpu_to_be32(addr / msb->page_size);
- param.cmd_param = 0;
+ param.tpc_param = 0;
sg_init_one(&msb->req_sg[0], buffer,
be16_to_cpu(param.data_count) * msb->page_size);
struct memstick_host *host = card->host;
int rc = 0;
- msb->system = 0x80;
+ msb->system = MEMSTICK_SYS_SERIAL;
card->reg_addr.r_offset = offsetof(struct mspro_register, status);
card->reg_addr.r_length = sizeof(struct ms_status_register);
card->reg_addr.w_offset = offsetof(struct mspro_register, param);
if (memstick_set_rw_addr(card))
return -EIO;
- if (host->caps & MEMSTICK_CAP_PARALLEL) {
+ if (host->caps & MEMSTICK_CAP_PAR4) {
if (mspro_block_switch_to_parallel(card))
printk(KERN_WARNING "%s: could not switch to "
"parallel interface\n", card->dev.bus_id);
MODULE_AUTHOR("Alex Dubov");
MODULE_DESCRIPTION("Sony MemoryStickPro block device driver");
MODULE_DEVICE_TABLE(memstick, mspro_block_id_tbl);
-MODULE_VERSION(DRIVER_VERSION);
To compile this driver as a module, choose M here: the
module will be called tifm_ms.
+config MEMSTICK_JMICRON_38X
+ tristate "JMicron JMB38X MemoryStick interface support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PCI
+
+ help
+ Say Y here if you want to be able to access MemoryStick cards with
+ the JMicron(R) JMB38X MemoryStick card reader.
+
+ To compile this driver as a module, choose M here: the
+ module will be called jmb38x_ms.
#
ifeq ($(CONFIG_MEMSTICK_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
+ EXTRA_CFLAGS += -DDEBUG
endif
-obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
-
+obj-$(CONFIG_MEMSTICK_TIFM_MS) += tifm_ms.o
+obj-$(CONFIG_MEMSTICK_JMICRON_38X) += jmb38x_ms.o
--- /dev/null
+/*
+ * jmb38x_ms.c - JMicron jmb38x MemoryStick card reader
+ *
+ * Copyright (C) 2008 Alex Dubov <oakad@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/memstick.h>
+
+#define DRIVER_NAME "jmb38x_ms"
+
+static int no_dma;
+module_param(no_dma, bool, 0644);
+
+enum {
+ DMA_ADDRESS = 0x00,
+ BLOCK = 0x04,
+ DMA_CONTROL = 0x08,
+ TPC_P0 = 0x0c,
+ TPC_P1 = 0x10,
+ TPC = 0x14,
+ HOST_CONTROL = 0x18,
+ DATA = 0x1c,
+ STATUS = 0x20,
+ INT_STATUS = 0x24,
+ INT_STATUS_ENABLE = 0x28,
+ INT_SIGNAL_ENABLE = 0x2c,
+ TIMER = 0x30,
+ TIMER_CONTROL = 0x34,
+ PAD_OUTPUT_ENABLE = 0x38,
+ PAD_PU_PD = 0x3c,
+ CLOCK_DELAY = 0x40,
+ ADMA_ADDRESS = 0x44,
+ CLOCK_CONTROL = 0x48,
+ LED_CONTROL = 0x4c,
+ VERSION = 0x50
+};
+
+struct jmb38x_ms_host {
+ struct jmb38x_ms *chip;
+ void __iomem *addr;
+ spinlock_t lock;
+ int id;
+ char host_id[DEVICE_ID_SIZE];
+ int irq;
+ unsigned int block_pos;
+ unsigned long timeout_jiffies;
+ struct timer_list timer;
+ struct memstick_request *req;
+ unsigned char eject:1,
+ use_dma:1;
+ unsigned char cmd_flags;
+ unsigned char io_pos;
+ unsigned int io_word[2];
+};
+
+struct jmb38x_ms {
+ struct pci_dev *pdev;
+ int host_cnt;
+ struct memstick_host *hosts[];
+};
+
+#define BLOCK_COUNT_MASK 0xffff0000
+#define BLOCK_SIZE_MASK 0x00000fff
+
+#define DMA_CONTROL_ENABLE 0x00000001
+
+#define TPC_DATA_SEL 0x00008000
+#define TPC_DIR 0x00004000
+#define TPC_WAIT_INT 0x00002000
+#define TPC_GET_INT 0x00000800
+#define TPC_CODE_SZ_MASK 0x00000700
+#define TPC_DATA_SZ_MASK 0x00000007
+
+#define HOST_CONTROL_RESET_REQ 0x00008000
+#define HOST_CONTROL_REI 0x00004000
+#define HOST_CONTROL_LED 0x00000400
+#define HOST_CONTROL_FAST_CLK 0x00000200
+#define HOST_CONTROL_RESET 0x00000100
+#define HOST_CONTROL_POWER_EN 0x00000080
+#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_IF_SHIFT 4
+
+#define HOST_CONTROL_IF_SERIAL 0x0
+#define HOST_CONTROL_IF_PAR4 0x1
+#define HOST_CONTROL_IF_PAR8 0x3
+
+#define STATUS_HAS_MEDIA 0x00000400
+#define STATUS_FIFO_EMPTY 0x00000200
+#define STATUS_FIFO_FULL 0x00000100
+
+#define INT_STATUS_TPC_ERR 0x00080000
+#define INT_STATUS_CRC_ERR 0x00040000
+#define INT_STATUS_TIMER_TO 0x00020000
+#define INT_STATUS_HSK_TO 0x00010000
+#define INT_STATUS_ANY_ERR 0x00008000
+#define INT_STATUS_FIFO_WRDY 0x00000080
+#define INT_STATUS_FIFO_RRDY 0x00000040
+#define INT_STATUS_MEDIA_OUT 0x00000010
+#define INT_STATUS_MEDIA_IN 0x00000008
+#define INT_STATUS_DMA_BOUNDARY 0x00000004
+#define INT_STATUS_EOTRAN 0x00000002
+#define INT_STATUS_EOTPC 0x00000001
+
+#define INT_STATUS_ALL 0x000f801f
+
+#define PAD_OUTPUT_ENABLE_MS 0x0F3F
+
+#define PAD_PU_PD_OFF 0x7FFF0000
+#define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000
+#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
+
+enum {
+ CMD_READY = 0x01,
+ FIFO_READY = 0x02,
+ REG_DATA = 0x04,
+ AUTO_GET_INT = 0x08
+};
+
+static unsigned int jmb38x_ms_read_data(struct jmb38x_ms_host *host,
+ unsigned char *buf, unsigned int length)
+{
+ unsigned int off = 0;
+
+ while (host->io_pos && length) {
+ buf[off++] = host->io_word[0] & 0xff;
+ host->io_word[0] >>= 8;
+ length--;
+ host->io_pos--;
+ }
+
+ if (!length)
+ return off;
+
+ while (!(STATUS_FIFO_EMPTY & readl(host->addr + STATUS))) {
+ if (length < 4)
+ break;
+ *(unsigned int *)(buf + off) = __raw_readl(host->addr + DATA);
+ length -= 4;
+ off += 4;
+ }
+
+ if (length
+ && !(STATUS_FIFO_EMPTY & readl(host->addr + STATUS))) {
+ host->io_word[0] = readl(host->addr + DATA);
+ for (host->io_pos = 4; host->io_pos; --host->io_pos) {
+ buf[off++] = host->io_word[0] & 0xff;
+ host->io_word[0] >>= 8;
+ length--;
+ if (!length)
+ break;
+ }
+ }
+
+ return off;
+}
+
+static unsigned int jmb38x_ms_read_reg_data(struct jmb38x_ms_host *host,
+ unsigned char *buf,
+ unsigned int length)
+{
+ unsigned int off = 0;
+
+ while (host->io_pos > 4 && length) {
+ buf[off++] = host->io_word[0] & 0xff;
+ host->io_word[0] >>= 8;
+ length--;
+ host->io_pos--;
+ }
+
+ if (!length)
+ return off;
+
+ while (host->io_pos && length) {
+ buf[off++] = host->io_word[1] & 0xff;
+ host->io_word[1] >>= 8;
+ length--;
+ host->io_pos--;
+ }
+
+ return off;
+}
+
+static unsigned int jmb38x_ms_write_data(struct jmb38x_ms_host *host,
+ unsigned char *buf,
+ unsigned int length)
+{
+ unsigned int off = 0;
+
+ if (host->io_pos) {
+ while (host->io_pos < 4 && length) {
+ host->io_word[0] |= buf[off++] << (host->io_pos * 8);
+ host->io_pos++;
+ length--;
+ }
+ }
+
+ if (host->io_pos == 4
+ && !(STATUS_FIFO_FULL & readl(host->addr + STATUS))) {
+ writel(host->io_word[0], host->addr + DATA);
+ host->io_pos = 0;
+ host->io_word[0] = 0;
+ } else if (host->io_pos) {
+ return off;
+ }
+
+ if (!length)
+ return off;
+
+ while (!(STATUS_FIFO_FULL & readl(host->addr + STATUS))) {
+ if (length < 4)
+ break;
+
+ __raw_writel(*(unsigned int *)(buf + off),
+ host->addr + DATA);
+ length -= 4;
+ off += 4;
+ }
+
+ switch (length) {
+ case 3:
+ host->io_word[0] |= buf[off + 2] << 16;
+ host->io_pos++;
+ case 2:
+ host->io_word[0] |= buf[off + 1] << 8;
+ host->io_pos++;
+ case 1:
+ host->io_word[0] |= buf[off];
+ host->io_pos++;
+ }
+
+ off += host->io_pos;
+
+ return off;
+}
+
+static unsigned int jmb38x_ms_write_reg_data(struct jmb38x_ms_host *host,
+ unsigned char *buf,
+ unsigned int length)
+{
+ unsigned int off = 0;
+
+ while (host->io_pos < 4 && length) {
+ host->io_word[0] &= ~(0xff << (host->io_pos * 8));
+ host->io_word[0] |= buf[off++] << (host->io_pos * 8);
+ host->io_pos++;
+ length--;
+ }
+
+ if (!length)
+ return off;
+
+ while (host->io_pos < 8 && length) {
+ host->io_word[1] &= ~(0xff << (host->io_pos * 8));
+ host->io_word[1] |= buf[off++] << (host->io_pos * 8);
+ host->io_pos++;
+ length--;
+ }
+
+ return off;
+}
+
+static int jmb38x_ms_transfer_data(struct jmb38x_ms_host *host)
+{
+ unsigned int length;
+ unsigned int off;
+ unsigned int t_size, p_off, p_cnt;
+ unsigned char *buf;
+ struct page *pg;
+ unsigned long flags = 0;
+
+ if (host->req->long_data) {
+ length = host->req->sg.length - host->block_pos;
+ off = host->req->sg.offset + host->block_pos;
+ } else {
+ length = host->req->data_len - host->block_pos;
+ off = 0;
+ }
+
+ while (length) {
+ if (host->req->long_data) {
+ pg = nth_page(sg_page(&host->req->sg),
+ off >> PAGE_SHIFT);
+ p_off = offset_in_page(off);
+ p_cnt = PAGE_SIZE - p_off;
+ p_cnt = min(p_cnt, length);
+
+ local_irq_save(flags);
+ buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + p_off;
+ } else {
+ buf = host->req->data + host->block_pos;
+ p_cnt = host->req->data_len - host->block_pos;
+ }
+
+ if (host->req->data_dir == WRITE)
+ t_size = !(host->cmd_flags & REG_DATA)
+ ? jmb38x_ms_write_data(host, buf, p_cnt)
+ : jmb38x_ms_write_reg_data(host, buf, p_cnt);
+ else
+ t_size = !(host->cmd_flags & REG_DATA)
+ ? jmb38x_ms_read_data(host, buf, p_cnt)
+ : jmb38x_ms_read_reg_data(host, buf, p_cnt);
+
+ if (host->req->long_data) {
+ kunmap_atomic(buf - p_off, KM_BIO_SRC_IRQ);
+ local_irq_restore(flags);
+ }
+
+ if (!t_size)
+ break;
+ host->block_pos += t_size;
+ length -= t_size;
+ off += t_size;
+ }
+
+ if (!length && host->req->data_dir == WRITE) {
+ if (host->cmd_flags & REG_DATA) {
+ writel(host->io_word[0], host->addr + TPC_P0);
+ writel(host->io_word[1], host->addr + TPC_P1);
+ } else if (host->io_pos) {
+ writel(host->io_word[0], host->addr + DATA);
+ }
+ }
+
+ return length;
+}
+
+static int jmb38x_ms_issue_cmd(struct memstick_host *msh)
+{
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned char *data;
+ unsigned int data_len, cmd, t_val;
+
+ if (!(STATUS_HAS_MEDIA & readl(host->addr + STATUS))) {
+ dev_dbg(msh->cdev.dev, "no media status\n");
+ host->req->error = -ETIME;
+ return host->req->error;
+ }
+
+ dev_dbg(msh->cdev.dev, "control %08x\n",
+ readl(host->addr + HOST_CONTROL));
+ dev_dbg(msh->cdev.dev, "status %08x\n", readl(host->addr + INT_STATUS));
+ dev_dbg(msh->cdev.dev, "hstatus %08x\n", readl(host->addr + STATUS));
+
+ host->cmd_flags = 0;
+ host->block_pos = 0;
+ host->io_pos = 0;
+ host->io_word[0] = 0;
+ host->io_word[1] = 0;
+
+ cmd = host->req->tpc << 16;
+ cmd |= TPC_DATA_SEL;
+
+ if (host->req->data_dir == READ)
+ cmd |= TPC_DIR;
+ if (host->req->need_card_int)
+ cmd |= TPC_WAIT_INT;
+ if (host->req->get_int_reg)
+ cmd |= TPC_GET_INT;
+
+ data = host->req->data;
+
+ host->use_dma = !no_dma;
+
+ if (host->req->long_data) {
+ data_len = host->req->sg.length;
+ } else {
+ data_len = host->req->data_len;
+ host->use_dma = 0;
+ }
+
+ if (data_len <= 8) {
+ cmd &= ~(TPC_DATA_SEL | 0xf);
+ host->cmd_flags |= REG_DATA;
+ cmd |= data_len & 0xf;
+ host->use_dma = 0;
+ }
+
+ if (host->use_dma) {
+ if (1 != pci_map_sg(host->chip->pdev, &host->req->sg, 1,
+ host->req->data_dir == READ
+ ? PCI_DMA_FROMDEVICE
+ : PCI_DMA_TODEVICE)) {
+ host->req->error = -ENOMEM;
+ return host->req->error;
+ }
+ data_len = sg_dma_len(&host->req->sg);
+ writel(sg_dma_address(&host->req->sg),
+ host->addr + DMA_ADDRESS);
+ writel(((1 << 16) & BLOCK_COUNT_MASK)
+ | (data_len & BLOCK_SIZE_MASK),
+ host->addr + BLOCK);
+ writel(DMA_CONTROL_ENABLE, host->addr + DMA_CONTROL);
+ } else if (!(host->cmd_flags & REG_DATA)) {
+ writel(((1 << 16) & BLOCK_COUNT_MASK)
+ | (data_len & BLOCK_SIZE_MASK),
+ host->addr + BLOCK);
+ t_val = readl(host->addr + INT_STATUS_ENABLE);
+ t_val |= host->req->data_dir == READ
+ ? INT_STATUS_FIFO_RRDY
+ : INT_STATUS_FIFO_WRDY;
+
+ writel(t_val, host->addr + INT_STATUS_ENABLE);
+ writel(t_val, host->addr + INT_SIGNAL_ENABLE);
+ } else {
+ cmd &= ~(TPC_DATA_SEL | 0xf);
+ host->cmd_flags |= REG_DATA;
+ cmd |= data_len & 0xf;
+
+ if (host->req->data_dir == WRITE) {
+ jmb38x_ms_transfer_data(host);
+ writel(host->io_word[0], host->addr + TPC_P0);
+ writel(host->io_word[1], host->addr + TPC_P1);
+ }
+ }
+
+ mod_timer(&host->timer, jiffies + host->timeout_jiffies);
+ writel(HOST_CONTROL_LED | readl(host->addr + HOST_CONTROL),
+ host->addr + HOST_CONTROL);
+ host->req->error = 0;
+
+ writel(cmd, host->addr + TPC);
+ dev_dbg(msh->cdev.dev, "executing TPC %08x, len %x\n", cmd, data_len);
+
+ return 0;
+}
+
+static void jmb38x_ms_complete_cmd(struct memstick_host *msh, int last)
+{
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned int t_val = 0;
+ int rc;
+
+ del_timer(&host->timer);
+
+ dev_dbg(msh->cdev.dev, "c control %08x\n",
+ readl(host->addr + HOST_CONTROL));
+ dev_dbg(msh->cdev.dev, "c status %08x\n",
+ readl(host->addr + INT_STATUS));
+ dev_dbg(msh->cdev.dev, "c hstatus %08x\n", readl(host->addr + STATUS));
+
+ if (host->req->get_int_reg) {
+ t_val = readl(host->addr + TPC_P0);
+ host->req->int_reg = (t_val & 0xff);
+ }
+
+ if (host->use_dma) {
+ writel(0, host->addr + DMA_CONTROL);
+ pci_unmap_sg(host->chip->pdev, &host->req->sg, 1,
+ host->req->data_dir == READ
+ ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
+ } else {
+ t_val = readl(host->addr + INT_STATUS_ENABLE);
+ if (host->req->data_dir == READ)
+ t_val &= ~INT_STATUS_FIFO_RRDY;
+ else
+ t_val &= ~INT_STATUS_FIFO_WRDY;
+
+ writel(t_val, host->addr + INT_STATUS_ENABLE);
+ writel(t_val, host->addr + INT_SIGNAL_ENABLE);
+ }
+
+ writel((~HOST_CONTROL_LED) & readl(host->addr + HOST_CONTROL),
+ host->addr + HOST_CONTROL);
+
+ if (!last) {
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ } while (!rc && jmb38x_ms_issue_cmd(msh));
+ } else {
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ if (!rc)
+ host->req->error = -ETIME;
+ } while (!rc);
+ }
+}
+
+static irqreturn_t jmb38x_ms_isr(int irq, void *dev_id)
+{
+ struct memstick_host *msh = dev_id;
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned int irq_status;
+
+ spin_lock(&host->lock);
+ irq_status = readl(host->addr + INT_STATUS);
+ dev_dbg(&host->chip->pdev->dev, "irq_status = %08x\n", irq_status);
+ if (irq_status == 0 || irq_status == (~0)) {
+ spin_unlock(&host->lock);
+ return IRQ_NONE;
+ }
+
+ if (host->req) {
+ if (irq_status & INT_STATUS_ANY_ERR) {
+ if (irq_status & INT_STATUS_CRC_ERR)
+ host->req->error = -EILSEQ;
+ else
+ host->req->error = -ETIME;
+ } else {
+ if (host->use_dma) {
+ if (irq_status & INT_STATUS_EOTRAN)
+ host->cmd_flags |= FIFO_READY;
+ } else {
+ if (irq_status & (INT_STATUS_FIFO_RRDY
+ | INT_STATUS_FIFO_WRDY))
+ jmb38x_ms_transfer_data(host);
+
+ if (irq_status & INT_STATUS_EOTRAN) {
+ jmb38x_ms_transfer_data(host);
+ host->cmd_flags |= FIFO_READY;
+ }
+ }
+
+ if (irq_status & INT_STATUS_EOTPC) {
+ host->cmd_flags |= CMD_READY;
+ if (host->cmd_flags & REG_DATA) {
+ if (host->req->data_dir == READ) {
+ host->io_word[0]
+ = readl(host->addr
+ + TPC_P0);
+ host->io_word[1]
+ = readl(host->addr
+ + TPC_P1);
+ host->io_pos = 8;
+
+ jmb38x_ms_transfer_data(host);
+ }
+ host->cmd_flags |= FIFO_READY;
+ }
+ }
+ }
+ }
+
+ if (irq_status & (INT_STATUS_MEDIA_IN | INT_STATUS_MEDIA_OUT)) {
+ dev_dbg(&host->chip->pdev->dev, "media changed\n");
+ memstick_detect_change(msh);
+ }
+
+ writel(irq_status, host->addr + INT_STATUS);
+
+ if (host->req
+ && (((host->cmd_flags & CMD_READY)
+ && (host->cmd_flags & FIFO_READY))
+ || host->req->error))
+ jmb38x_ms_complete_cmd(msh, 0);
+
+ spin_unlock(&host->lock);
+ return IRQ_HANDLED;
+}
+
+static void jmb38x_ms_abort(unsigned long data)
+{
+ struct memstick_host *msh = (struct memstick_host *)data;
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned long flags;
+
+ dev_dbg(&host->chip->pdev->dev, "abort\n");
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->req) {
+ host->req->error = -ETIME;
+ jmb38x_ms_complete_cmd(msh, 0);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void jmb38x_ms_request(struct memstick_host *msh)
+{
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned long flags;
+ int rc;
+
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->req) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ BUG();
+ return;
+ }
+
+ do {
+ rc = memstick_next_req(msh, &host->req);
+ } while (!rc && jmb38x_ms_issue_cmd(msh));
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void jmb38x_ms_reset(struct jmb38x_ms_host *host)
+{
+ unsigned int host_ctl = readl(host->addr + HOST_CONTROL);
+
+ writel(host_ctl | HOST_CONTROL_RESET_REQ | HOST_CONTROL_RESET,
+ host->addr + HOST_CONTROL);
+
+ while (HOST_CONTROL_RESET_REQ
+ & (host_ctl = readl(host->addr + HOST_CONTROL))) {
+ ndelay(100);
+ dev_dbg(&host->chip->pdev->dev, "reset\n");
+ }
+
+ writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE);
+ writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE);
+
+ dev_dbg(&host->chip->pdev->dev, "reset\n");
+}
+
+static void jmb38x_ms_set_param(struct memstick_host *msh,
+ enum memstick_param param,
+ int value)
+{
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+ unsigned int host_ctl;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ switch (param) {
+ case MEMSTICK_POWER:
+ if (value == MEMSTICK_POWER_ON) {
+ jmb38x_ms_reset(host);
+
+ writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
+ : PAD_PU_PD_ON_MS_SOCK0,
+ host->addr + PAD_PU_PD);
+
+ writel(PAD_OUTPUT_ENABLE_MS,
+ host->addr + PAD_OUTPUT_ENABLE);
+
+ host_ctl = readl(host->addr + HOST_CONTROL);
+ host_ctl |= 7;
+ writel(host_ctl | (HOST_CONTROL_POWER_EN
+ | HOST_CONTROL_CLOCK_EN),
+ host->addr + HOST_CONTROL);
+
+ dev_dbg(&host->chip->pdev->dev, "power on\n");
+ } else if (value == MEMSTICK_POWER_OFF) {
+ writel(readl(host->addr + HOST_CONTROL)
+ & ~(HOST_CONTROL_POWER_EN
+ | HOST_CONTROL_CLOCK_EN),
+ host->addr + HOST_CONTROL);
+ writel(0, host->addr + PAD_OUTPUT_ENABLE);
+ writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD);
+ dev_dbg(&host->chip->pdev->dev, "power off\n");
+ }
+ break;
+ case MEMSTICK_INTERFACE:
+ /* jmb38x_ms_reset(host); */
+
+ host_ctl = readl(host->addr + HOST_CONTROL);
+ host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ /* host_ctl |= 7; */
+
+ if (value == MEMSTICK_SERIAL) {
+ host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_IF_SERIAL
+ << HOST_CONTROL_IF_SHIFT;
+ host_ctl |= HOST_CONTROL_REI;
+ writel(0, host->addr + CLOCK_DELAY);
+ } else if (value == MEMSTICK_PAR4) {
+ host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_IF_PAR4
+ << HOST_CONTROL_IF_SHIFT;
+ host_ctl &= ~HOST_CONTROL_REI;
+ writel(4, host->addr + CLOCK_DELAY);
+ } else if (value == MEMSTICK_PAR8) {
+ host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_IF_PAR8
+ << HOST_CONTROL_IF_SHIFT;
+ host_ctl &= ~HOST_CONTROL_REI;
+ writel(4, host->addr + CLOCK_DELAY);
+ }
+ writel(host_ctl, host->addr + HOST_CONTROL);
+ break;
+ };
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+#ifdef CONFIG_PM
+
+static int jmb38x_ms_suspend(struct pci_dev *dev, pm_message_t state)
+{
+ struct jmb38x_ms *jm = pci_get_drvdata(dev);
+ int cnt;
+
+ for (cnt = 0; cnt < jm->host_cnt; ++cnt) {
+ if (!jm->hosts[cnt])
+ break;
+ memstick_suspend_host(jm->hosts[cnt]);
+ }
+
+ pci_save_state(dev);
+ pci_enable_wake(dev, pci_choose_state(dev, state), 0);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
+ return 0;
+}
+
+static int jmb38x_ms_resume(struct pci_dev *dev)
+{
+ struct jmb38x_ms *jm = pci_get_drvdata(dev);
+ int rc;
+
+ pci_set_power_state(dev, PCI_D0);
+ pci_restore_state(dev);
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+ pci_set_master(dev);
+
+ pci_read_config_dword(dev, 0xac, &rc);
+ pci_write_config_dword(dev, 0xac, rc | 0x00470000);
+
+ for (rc = 0; rc < jm->host_cnt; ++rc) {
+ if (!jm->hosts[rc])
+ break;
+ memstick_resume_host(jm->hosts[rc]);
+ memstick_detect_change(jm->hosts[rc]);
+ }
+
+ return 0;
+}
+
+#else
+
+#define jmb38x_ms_suspend NULL
+#define jmb38x_ms_resume NULL
+
+#endif /* CONFIG_PM */
+
+static int jmb38x_ms_count_slots(struct pci_dev *pdev)
+{
+ int cnt, rc = 0;
+
+ for (cnt = 0; cnt < PCI_ROM_RESOURCE; ++cnt) {
+ if (!(IORESOURCE_MEM & pci_resource_flags(pdev, cnt)))
+ break;
+
+ if (256 != pci_resource_len(pdev, cnt))
+ break;
+
+ ++rc;
+ }
+ return rc;
+}
+
+static struct memstick_host *jmb38x_ms_alloc_host(struct jmb38x_ms *jm, int cnt)
+{
+ struct memstick_host *msh;
+ struct jmb38x_ms_host *host;
+
+ msh = memstick_alloc_host(sizeof(struct jmb38x_ms_host),
+ &jm->pdev->dev);
+ if (!msh)
+ return NULL;
+
+ host = memstick_priv(msh);
+ host->chip = jm;
+ host->addr = ioremap(pci_resource_start(jm->pdev, cnt),
+ pci_resource_len(jm->pdev, cnt));
+ if (!host->addr)
+ goto err_out_free;
+
+ spin_lock_init(&host->lock);
+ host->id = cnt;
+ snprintf(host->host_id, DEVICE_ID_SIZE, DRIVER_NAME ":slot%d",
+ host->id);
+ host->irq = jm->pdev->irq;
+ host->timeout_jiffies = msecs_to_jiffies(4000);
+ msh->request = jmb38x_ms_request;
+ msh->set_param = jmb38x_ms_set_param;
+ /*
+ msh->caps = MEMSTICK_CAP_AUTO_GET_INT | MEMSTICK_CAP_PAR4
+ | MEMSTICK_CAP_PAR8;
+ */
+ msh->caps = MEMSTICK_CAP_PAR4 | MEMSTICK_CAP_PAR8;
+
+ setup_timer(&host->timer, jmb38x_ms_abort, (unsigned long)msh);
+
+ if (!request_irq(host->irq, jmb38x_ms_isr, IRQF_SHARED, host->host_id,
+ msh))
+ return msh;
+
+ iounmap(host->addr);
+err_out_free:
+ kfree(msh);
+ return NULL;
+}
+
+static void jmb38x_ms_free_host(struct memstick_host *msh)
+{
+ struct jmb38x_ms_host *host = memstick_priv(msh);
+
+ free_irq(host->irq, msh);
+ iounmap(host->addr);
+ memstick_free_host(msh);
+}
+
+static int jmb38x_ms_probe(struct pci_dev *pdev,
+ const struct pci_device_id *dev_id)
+{
+ struct jmb38x_ms *jm;
+ int pci_dev_busy = 0;
+ int rc, cnt;
+
+ rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (rc)
+ return rc;
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ pci_set_master(pdev);
+
+ rc = pci_request_regions(pdev, DRIVER_NAME);
+ if (rc) {
+ pci_dev_busy = 1;
+ goto err_out;
+ }
+
+ pci_read_config_dword(pdev, 0xac, &rc);
+ pci_write_config_dword(pdev, 0xac, rc | 0x00470000);
+
+ cnt = jmb38x_ms_count_slots(pdev);
+ if (!cnt) {
+ rc = -ENODEV;
+ pci_dev_busy = 1;
+ goto err_out;
+ }
+
+ jm = kzalloc(sizeof(struct jmb38x_ms)
+ + cnt * sizeof(struct memstick_host *), GFP_KERNEL);
+ if (!jm) {
+ rc = -ENOMEM;
+ goto err_out_int;
+ }
+
+ jm->pdev = pdev;
+ jm->host_cnt = cnt;
+ pci_set_drvdata(pdev, jm);
+
+ for (cnt = 0; cnt < jm->host_cnt; ++cnt) {
+ jm->hosts[cnt] = jmb38x_ms_alloc_host(jm, cnt);
+ if (!jm->hosts[cnt])
+ break;
+
+ rc = memstick_add_host(jm->hosts[cnt]);
+
+ if (rc) {
+ jmb38x_ms_free_host(jm->hosts[cnt]);
+ jm->hosts[cnt] = NULL;
+ break;
+ }
+ }
+
+ if (cnt)
+ return 0;
+
+ rc = -ENODEV;
+
+ pci_set_drvdata(pdev, NULL);
+ kfree(jm);
+err_out_int:
+ pci_release_regions(pdev);
+err_out:
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+static void jmb38x_ms_remove(struct pci_dev *dev)
+{
+ struct jmb38x_ms *jm = pci_get_drvdata(dev);
+ struct jmb38x_ms_host *host;
+ int cnt;
+ unsigned long flags;
+
+ for (cnt = 0; cnt < jm->host_cnt; ++cnt) {
+ if (!jm->hosts[cnt])
+ break;
+
+ host = memstick_priv(jm->hosts[cnt]);
+
+ writel(0, host->addr + INT_SIGNAL_ENABLE);
+ writel(0, host->addr + INT_STATUS_ENABLE);
+ mmiowb();
+ dev_dbg(&jm->pdev->dev, "interrupts off\n");
+ spin_lock_irqsave(&host->lock, flags);
+ if (host->req) {
+ host->req->error = -ETIME;
+ jmb38x_ms_complete_cmd(jm->hosts[cnt], 1);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ memstick_remove_host(jm->hosts[cnt]);
+ dev_dbg(&jm->pdev->dev, "host removed\n");
+
+ jmb38x_ms_free_host(jm->hosts[cnt]);
+ }
+
+ pci_set_drvdata(dev, NULL);
+ pci_release_regions(dev);
+ pci_disable_device(dev);
+ kfree(jm);
+}
+
+static struct pci_device_id jmb38x_ms_id_tbl [] = {
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_MS, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { }
+};
+
+static struct pci_driver jmb38x_ms_driver = {
+ .name = DRIVER_NAME,
+ .id_table = jmb38x_ms_id_tbl,
+ .probe = jmb38x_ms_probe,
+ .remove = jmb38x_ms_remove,
+ .suspend = jmb38x_ms_suspend,
+ .resume = jmb38x_ms_resume
+};
+
+static int __init jmb38x_ms_init(void)
+{
+ return pci_register_driver(&jmb38x_ms_driver);
+}
+
+static void __exit jmb38x_ms_exit(void)
+{
+ pci_unregister_driver(&jmb38x_ms_driver);
+}
+
+MODULE_AUTHOR("Alex Dubov");
+MODULE_DESCRIPTION("JMicron jmb38x MemoryStick driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, jmb38x_ms_id_tbl);
+
+module_init(jmb38x_ms_init);
+module_exit(jmb38x_ms_exit);
#include <asm/io.h>
#define DRIVER_NAME "tifm_ms"
-#define DRIVER_VERSION "0.1"
static int no_dma;
module_param(no_dma, bool, 0644);
-#define TIFM_MS_TIMEOUT 0x00100
-#define TIFM_MS_BADCRC 0x00200
-#define TIFM_MS_EOTPC 0x01000
-#define TIFM_MS_INT 0x02000
-
-/* The meaning of the bit majority in this constant is unknown. */
-#define TIFM_MS_SERIAL 0x04010
+/*
+ * Some control bits of TIFM appear to conform to Sony's reference design,
+ * so I'm just assuming they all are.
+ */
-#define TIFM_MS_SYS_LATCH 0x00100
-#define TIFM_MS_SYS_NOT_RDY 0x00800
-#define TIFM_MS_SYS_DATA 0x10000
+#define TIFM_MS_STAT_DRQ 0x04000
+#define TIFM_MS_STAT_MSINT 0x02000
+#define TIFM_MS_STAT_RDY 0x01000
+#define TIFM_MS_STAT_CRC 0x00200
+#define TIFM_MS_STAT_TOE 0x00100
+#define TIFM_MS_STAT_EMP 0x00020
+#define TIFM_MS_STAT_FUL 0x00010
+#define TIFM_MS_STAT_CED 0x00008
+#define TIFM_MS_STAT_ERR 0x00004
+#define TIFM_MS_STAT_BRQ 0x00002
+#define TIFM_MS_STAT_CNK 0x00001
+
+#define TIFM_MS_SYS_DMA 0x10000
+#define TIFM_MS_SYS_RESET 0x08000
+#define TIFM_MS_SYS_SRAC 0x04000
+#define TIFM_MS_SYS_INTEN 0x02000
+#define TIFM_MS_SYS_NOCRC 0x01000
+#define TIFM_MS_SYS_INTCLR 0x00800
+#define TIFM_MS_SYS_MSIEN 0x00400
+#define TIFM_MS_SYS_FCLR 0x00200
+#define TIFM_MS_SYS_FDIR 0x00100
+#define TIFM_MS_SYS_DAM 0x00080
+#define TIFM_MS_SYS_DRM 0x00040
+#define TIFM_MS_SYS_DRQSL 0x00020
+#define TIFM_MS_SYS_REI 0x00010
+#define TIFM_MS_SYS_REO 0x00008
+#define TIFM_MS_SYS_BSY_MASK 0x00007
+
+#define TIFM_MS_SYS_FIFO (TIFM_MS_SYS_INTEN | TIFM_MS_SYS_MSIEN \
+ | TIFM_MS_SYS_FCLR | TIFM_MS_SYS_BSY_MASK)
/* Hardware flags */
enum {
- CMD_READY = 0x0001,
- FIFO_READY = 0x0002,
- CARD_READY = 0x0004,
- DATA_CARRY = 0x0008
+ CMD_READY = 0x01,
+ FIFO_READY = 0x02,
+ CARD_INT = 0x04
};
struct tifm_ms {
struct tifm_dev *dev;
- unsigned short eject:1,
- no_dma:1;
- unsigned short cmd_flags;
+ struct timer_list timer;
+ struct memstick_request *req;
unsigned int mode_mask;
unsigned int block_pos;
unsigned long timeout_jiffies;
-
- struct timer_list timer;
- struct memstick_request *req;
+ unsigned char eject:1,
+ use_dma:1;
+ unsigned char cmd_flags;
+ unsigned char io_pos;
unsigned int io_word;
};
-static void tifm_ms_read_fifo(struct tifm_ms *host, unsigned int fifo_offset,
- struct page *pg, unsigned int page_off,
- unsigned int length)
+static unsigned int tifm_ms_read_data(struct tifm_ms *host,
+ unsigned char *buf, unsigned int length)
{
struct tifm_dev *sock = host->dev;
- unsigned int cnt = 0, off = 0;
- unsigned char *buf = kmap_atomic(pg, KM_BIO_DST_IRQ) + page_off;
+ unsigned int off = 0;
+
+ while (host->io_pos && length) {
+ buf[off++] = host->io_word & 0xff;
+ host->io_word >>= 8;
+ length--;
+ host->io_pos--;
+ }
- if (host->cmd_flags & DATA_CARRY) {
- while ((fifo_offset & 3) && length) {
+ if (!length)
+ return off;
+
+ while (!(TIFM_MS_STAT_EMP & readl(sock->addr + SOCK_MS_STATUS))) {
+ if (length < 4)
+ break;
+ *(unsigned int *)(buf + off) = __raw_readl(sock->addr
+ + SOCK_MS_DATA);
+ length -= 4;
+ off += 4;
+ }
+
+ if (length
+ && !(TIFM_MS_STAT_EMP & readl(sock->addr + SOCK_MS_STATUS))) {
+ host->io_word = readl(sock->addr + SOCK_MS_DATA);
+ for (host->io_pos = 4; host->io_pos; --host->io_pos) {
buf[off++] = host->io_word & 0xff;
host->io_word >>= 8;
length--;
- fifo_offset++;
+ if (!length)
+ break;
}
- if (!(fifo_offset & 3))
- host->cmd_flags &= ~DATA_CARRY;
- if (!length)
- return;
}
- do {
- host->io_word = readl(sock->addr + SOCK_FIFO_ACCESS
- + fifo_offset);
- cnt = 4;
- while (length && cnt) {
- buf[off++] = (host->io_word >> 8) & 0xff;
- cnt--;
- length--;
- }
- fifo_offset += 4 - cnt;
- } while (length);
-
- if (cnt)
- host->cmd_flags |= DATA_CARRY;
-
- kunmap_atomic(buf - page_off, KM_BIO_DST_IRQ);
+ return off;
}
-static void tifm_ms_write_fifo(struct tifm_ms *host, unsigned int fifo_offset,
- struct page *pg, unsigned int page_off,
- unsigned int length)
+static unsigned int tifm_ms_write_data(struct tifm_ms *host,
+ unsigned char *buf, unsigned int length)
{
struct tifm_dev *sock = host->dev;
- unsigned int cnt = 0, off = 0;
- unsigned char *buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + page_off;
+ unsigned int off = 0;
- if (host->cmd_flags & DATA_CARRY) {
- while (fifo_offset & 3) {
- host->io_word |= buf[off++] << (8 * (fifo_offset & 3));
+ if (host->io_pos) {
+ while (host->io_pos < 4 && length) {
+ host->io_word |= buf[off++] << (host->io_pos * 8);
+ host->io_pos++;
length--;
- fifo_offset++;
}
- if (!(fifo_offset & 3)) {
- writel(host->io_word, sock->addr + SOCK_FIFO_ACCESS
- + fifo_offset - 4);
-
- host->cmd_flags &= ~DATA_CARRY;
- }
- if (!length)
- return;
}
- do {
- cnt = 4;
+ if (host->io_pos == 4
+ && !(TIFM_MS_STAT_FUL & readl(sock->addr + SOCK_MS_STATUS))) {
+ writel(TIFM_MS_SYS_FDIR | readl(sock->addr + SOCK_MS_SYSTEM),
+ sock->addr + SOCK_MS_SYSTEM);
+ writel(host->io_word, sock->addr + SOCK_MS_DATA);
+ host->io_pos = 0;
host->io_word = 0;
- while (length && cnt) {
- host->io_word |= buf[off++] << (4 - cnt);
- cnt--;
- length--;
- }
- fifo_offset += 4 - cnt;
- if (!cnt)
- writel(host->io_word, sock->addr + SOCK_FIFO_ACCESS
- + fifo_offset - 4);
-
- } while (length);
-
- if (cnt)
- host->cmd_flags |= DATA_CARRY;
+ } else if (host->io_pos) {
+ return off;
+ }
- kunmap_atomic(buf - page_off, KM_BIO_SRC_IRQ);
-}
+ if (!length)
+ return off;
-static void tifm_ms_move_block(struct tifm_ms *host, unsigned int length)
-{
- unsigned int t_size;
- unsigned int off = host->req->sg.offset + host->block_pos;
- unsigned int p_off, p_cnt;
- struct page *pg;
- unsigned long flags;
+ while (!(TIFM_MS_STAT_FUL & readl(sock->addr + SOCK_MS_STATUS))) {
+ if (length < 4)
+ break;
+ writel(TIFM_MS_SYS_FDIR | readl(sock->addr + SOCK_MS_SYSTEM),
+ sock->addr + SOCK_MS_SYSTEM);
+ __raw_writel(*(unsigned int *)(buf + off),
+ sock->addr + SOCK_MS_DATA);
+ length -= 4;
+ off += 4;
+ }
- dev_dbg(&host->dev->dev, "moving block\n");
- local_irq_save(flags);
- t_size = length;
- while (t_size) {
- pg = nth_page(sg_page(&host->req->sg), off >> PAGE_SHIFT);
- p_off = offset_in_page(off);
- p_cnt = PAGE_SIZE - p_off;
- p_cnt = min(p_cnt, t_size);
+ switch (length) {
+ case 3:
+ host->io_word |= buf[off + 2] << 16;
+ host->io_pos++;
+ case 2:
+ host->io_word |= buf[off + 1] << 8;
+ host->io_pos++;
+ case 1:
+ host->io_word |= buf[off];
+ host->io_pos++;
+ }
- if (host->req->data_dir == WRITE)
- tifm_ms_write_fifo(host, length - t_size,
- pg, p_off, p_cnt);
- else
- tifm_ms_read_fifo(host, length - t_size,
- pg, p_off, p_cnt);
+ off += host->io_pos;
- t_size -= p_cnt;
- }
- local_irq_restore(flags);
+ return off;
}
-static int tifm_ms_transfer_data(struct tifm_ms *host, int skip)
+static unsigned int tifm_ms_transfer_data(struct tifm_ms *host)
{
struct tifm_dev *sock = host->dev;
- unsigned int length = host->req->sg.length - host->block_pos;
+ unsigned int length;
+ unsigned int off;
+ unsigned int t_size, p_off, p_cnt;
+ unsigned char *buf;
+ struct page *pg;
+ unsigned long flags = 0;
+
+ if (host->req->long_data) {
+ length = host->req->sg.length - host->block_pos;
+ off = host->req->sg.offset + host->block_pos;
+ } else {
+ length = host->req->data_len - host->block_pos;
+ off = 0;
+ }
+ dev_dbg(&sock->dev, "fifo data transfer, %d, %d\n", length,
+ host->block_pos);
+
+ while (length) {
+ if (host->req->long_data) {
+ pg = nth_page(sg_page(&host->req->sg),
+ off >> PAGE_SHIFT);
+ p_off = offset_in_page(off);
+ p_cnt = PAGE_SIZE - p_off;
+ p_cnt = min(p_cnt, length);
+
+ local_irq_save(flags);
+ buf = kmap_atomic(pg, KM_BIO_SRC_IRQ) + p_off;
+ } else {
+ buf = host->req->data + host->block_pos;
+ p_cnt = host->req->data_len - host->block_pos;
+ }
- if (!length)
- return 1;
+ t_size = host->req->data_dir == WRITE
+ ? tifm_ms_write_data(host, buf, p_cnt)
+ : tifm_ms_read_data(host, buf, p_cnt);
- if (length > TIFM_FIFO_SIZE)
- length = TIFM_FIFO_SIZE;
+ if (host->req->long_data) {
+ kunmap_atomic(buf - p_off, KM_BIO_SRC_IRQ);
+ local_irq_restore(flags);
+ }
- if (!skip) {
- tifm_ms_move_block(host, length);
- host->block_pos += length;
+ if (!t_size)
+ break;
+ host->block_pos += t_size;
+ length -= t_size;
+ off += t_size;
}
- if ((host->req->data_dir == READ)
- && (host->block_pos == host->req->sg.length))
- return 1;
-
- writel(ilog2(length) - 2, sock->addr + SOCK_FIFO_PAGE_SIZE);
- if (host->req->data_dir == WRITE)
- writel((1 << 8) | TIFM_DMA_TX, sock->addr + SOCK_DMA_CONTROL);
- else
- writel((1 << 8), sock->addr + SOCK_DMA_CONTROL);
+ dev_dbg(&sock->dev, "fifo data transfer, %d remaining\n", length);
+ if (!length && (host->req->data_dir == WRITE)) {
+ if (host->io_pos) {
+ writel(TIFM_MS_SYS_FDIR
+ | readl(sock->addr + SOCK_MS_SYSTEM),
+ sock->addr + SOCK_MS_SYSTEM);
+ writel(host->io_word, sock->addr + SOCK_MS_DATA);
+ }
+ writel(TIFM_MS_SYS_FDIR
+ | readl(sock->addr + SOCK_MS_SYSTEM),
+ sock->addr + SOCK_MS_SYSTEM);
+ writel(0, sock->addr + SOCK_MS_DATA);
+ } else {
+ readl(sock->addr + SOCK_MS_DATA);
+ }
- return 0;
+ return length;
}
static int tifm_ms_issue_cmd(struct tifm_ms *host)
{
struct tifm_dev *sock = host->dev;
unsigned char *data;
- unsigned int data_len = 0, cmd = 0, cmd_mask = 0, cnt, tval = 0;
+ unsigned int data_len, cmd, sys_param;
+ host->cmd_flags = 0;
+ host->block_pos = 0;
+ host->io_pos = 0;
+ host->io_word = 0;
host->cmd_flags = 0;
- if (host->req->io_type == MEMSTICK_IO_SG) {
- if (!host->no_dma) {
- if (1 != tifm_map_sg(sock, &host->req->sg, 1,
- host->req->data_dir == READ
- ? PCI_DMA_FROMDEVICE
- : PCI_DMA_TODEVICE)) {
- host->req->error = -ENOMEM;
- return host->req->error;
- }
- data_len = sg_dma_len(&host->req->sg);
- } else
- data_len = host->req->sg.length;
-
- writel(TIFM_FIFO_INT_SETALL,
- sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
- writel(TIFM_FIFO_ENABLE,
- sock->addr + SOCK_FIFO_CONTROL);
- writel(TIFM_FIFO_INTMASK,
- sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
+ data = host->req->data;
- if (!host->no_dma) {
- writel(ilog2(data_len) - 2,
- sock->addr + SOCK_FIFO_PAGE_SIZE);
- writel(sg_dma_address(&host->req->sg),
- sock->addr + SOCK_DMA_ADDRESS);
- if (host->req->data_dir == WRITE)
- writel((1 << 8) | TIFM_DMA_TX | TIFM_DMA_EN,
- sock->addr + SOCK_DMA_CONTROL);
- else
- writel((1 << 8) | TIFM_DMA_EN,
- sock->addr + SOCK_DMA_CONTROL);
- } else {
- tifm_ms_transfer_data(host,
- host->req->data_dir == READ);
- }
+ host->use_dma = !no_dma;
- cmd_mask = readl(sock->addr + SOCK_MS_SYSTEM);
- cmd_mask |= TIFM_MS_SYS_DATA | TIFM_MS_SYS_NOT_RDY;
- writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM);
- } else if (host->req->io_type == MEMSTICK_IO_VAL) {
- data = host->req->data;
+ if (host->req->long_data) {
+ data_len = host->req->sg.length;
+ if (!is_power_of_2(data_len))
+ host->use_dma = 0;
+ } else {
data_len = host->req->data_len;
+ host->use_dma = 0;
+ }
- cmd_mask = host->mode_mask | 0x2607; /* unknown constant */
-
- if (host->req->data_dir == WRITE) {
- cmd_mask |= TIFM_MS_SYS_LATCH;
- writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM);
- for (cnt = 0; (data_len - cnt) >= 4; cnt += 4) {
- writel(TIFM_MS_SYS_LATCH
- | readl(sock->addr + SOCK_MS_SYSTEM),
- sock->addr + SOCK_MS_SYSTEM);
- __raw_writel(*(unsigned int *)(data + cnt),
- sock->addr + SOCK_MS_DATA);
- dev_dbg(&sock->dev, "writing %x\n",
- *(int *)(data + cnt));
- }
- switch (data_len - cnt) {
- case 3:
- tval |= data[cnt + 2] << 16;
- case 2:
- tval |= data[cnt + 1] << 8;
- case 1:
- tval |= data[cnt];
- writel(TIFM_MS_SYS_LATCH
- | readl(sock->addr + SOCK_MS_SYSTEM),
- sock->addr + SOCK_MS_SYSTEM);
- writel(tval, sock->addr + SOCK_MS_DATA);
- dev_dbg(&sock->dev, "writing %x\n", tval);
- }
+ writel(TIFM_FIFO_INT_SETALL,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
+ writel(TIFM_FIFO_ENABLE,
+ sock->addr + SOCK_FIFO_CONTROL);
+
+ if (host->use_dma) {
+ if (1 != tifm_map_sg(sock, &host->req->sg, 1,
+ host->req->data_dir == READ
+ ? PCI_DMA_FROMDEVICE
+ : PCI_DMA_TODEVICE)) {
+ host->req->error = -ENOMEM;
+ return host->req->error;
+ }
+ data_len = sg_dma_len(&host->req->sg);
- writel(TIFM_MS_SYS_LATCH
- | readl(sock->addr + SOCK_MS_SYSTEM),
- sock->addr + SOCK_MS_SYSTEM);
- writel(0, sock->addr + SOCK_MS_DATA);
- dev_dbg(&sock->dev, "writing %x\n", 0);
+ writel(ilog2(data_len) - 2,
+ sock->addr + SOCK_FIFO_PAGE_SIZE);
+ writel(TIFM_FIFO_INTMASK,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
+ sys_param = TIFM_DMA_EN | (1 << 8);
+ if (host->req->data_dir == WRITE)
+ sys_param |= TIFM_DMA_TX;
+
+ writel(TIFM_FIFO_INTMASK,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
- } else
- writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM);
+ writel(sg_dma_address(&host->req->sg),
+ sock->addr + SOCK_DMA_ADDRESS);
+ writel(sys_param, sock->addr + SOCK_DMA_CONTROL);
+ } else {
+ writel(host->mode_mask | TIFM_MS_SYS_FIFO,
+ sock->addr + SOCK_MS_SYSTEM);
- cmd_mask = readl(sock->addr + SOCK_MS_SYSTEM);
- cmd_mask &= ~TIFM_MS_SYS_DATA;
- cmd_mask |= TIFM_MS_SYS_NOT_RDY;
- dev_dbg(&sock->dev, "mask %x\n", cmd_mask);
- writel(cmd_mask, sock->addr + SOCK_MS_SYSTEM);
- } else
- BUG();
+ writel(TIFM_FIFO_MORE,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
+ }
mod_timer(&host->timer, jiffies + host->timeout_jiffies);
writel(TIFM_CTRL_LED | readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
host->req->error = 0;
+ sys_param = readl(sock->addr + SOCK_MS_SYSTEM);
+ sys_param |= TIFM_MS_SYS_INTCLR;
+
+ if (host->use_dma)
+ sys_param |= TIFM_MS_SYS_DMA;
+ else
+ sys_param &= ~TIFM_MS_SYS_DMA;
+
+ writel(sys_param, sock->addr + SOCK_MS_SYSTEM);
+
cmd = (host->req->tpc & 0xf) << 12;
cmd |= data_len;
writel(cmd, sock->addr + SOCK_MS_COMMAND);
- dev_dbg(&sock->dev, "executing TPC %x, %x\n", cmd, cmd_mask);
+ dev_dbg(&sock->dev, "executing TPC %x, %x\n", cmd, sys_param);
return 0;
}
{
struct tifm_dev *sock = host->dev;
struct memstick_host *msh = tifm_get_drvdata(sock);
- unsigned int tval = 0, data_len;
- unsigned char *data;
int rc;
del_timer(&host->timer);
- if (host->req->io_type == MEMSTICK_IO_SG) {
- if (!host->no_dma)
- tifm_unmap_sg(sock, &host->req->sg, 1,
- host->req->data_dir == READ
- ? PCI_DMA_FROMDEVICE
- : PCI_DMA_TODEVICE);
- } else if (host->req->io_type == MEMSTICK_IO_VAL) {
- writel(~TIFM_MS_SYS_DATA & readl(sock->addr + SOCK_MS_SYSTEM),
- sock->addr + SOCK_MS_SYSTEM);
-
- data = host->req->data;
- data_len = host->req->data_len;
- if (host->req->data_dir == READ) {
- for (rc = 0; (data_len - rc) >= 4; rc += 4)
- *(int *)(data + rc)
- = __raw_readl(sock->addr
- + SOCK_MS_DATA);
-
- if (data_len - rc)
- tval = readl(sock->addr + SOCK_MS_DATA);
- switch (data_len - rc) {
- case 3:
- data[rc + 2] = (tval >> 16) & 0xff;
- case 2:
- data[rc + 1] = (tval >> 8) & 0xff;
- case 1:
- data[rc] = tval & 0xff;
- }
- readl(sock->addr + SOCK_MS_DATA);
- }
- }
+ if (host->use_dma)
+ tifm_unmap_sg(sock, &host->req->sg, 1,
+ host->req->data_dir == READ
+ ? PCI_DMA_FROMDEVICE
+ : PCI_DMA_TODEVICE);
writel((~TIFM_CTRL_LED) & readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
+ dev_dbg(&sock->dev, "TPC complete\n");
do {
rc = memstick_next_req(msh, &host->req);
} while (!rc && tifm_ms_issue_cmd(host));
if (!host->req->error) {
if (!(host->cmd_flags & CMD_READY))
return 1;
- if ((host->req->io_type == MEMSTICK_IO_SG)
- && !(host->cmd_flags & FIFO_READY))
+ if (!(host->cmd_flags & FIFO_READY))
return 1;
if (host->req->need_card_int
- && !(host->cmd_flags & CARD_READY))
+ && !(host->cmd_flags & CARD_INT))
return 1;
}
return 0;
static void tifm_ms_data_event(struct tifm_dev *sock)
{
struct tifm_ms *host;
- unsigned int fifo_status = 0;
+ unsigned int fifo_status = 0, host_status = 0;
int rc = 1;
spin_lock(&sock->lock);
host = memstick_priv((struct memstick_host *)tifm_get_drvdata(sock));
fifo_status = readl(sock->addr + SOCK_DMA_FIFO_STATUS);
- dev_dbg(&sock->dev, "data event: fifo_status %x, flags %x\n",
- fifo_status, host->cmd_flags);
+ host_status = readl(sock->addr + SOCK_MS_STATUS);
+ dev_dbg(&sock->dev,
+ "data event: fifo_status %x, host_status %x, flags %x\n",
+ fifo_status, host_status, host->cmd_flags);
if (host->req) {
- if (fifo_status & TIFM_FIFO_READY) {
- if (!host->no_dma || tifm_ms_transfer_data(host, 0)) {
+ if (host->use_dma && (fifo_status & 1)) {
+ host->cmd_flags |= FIFO_READY;
+ rc = tifm_ms_check_status(host);
+ }
+ if (!host->use_dma && (fifo_status & TIFM_FIFO_MORE)) {
+ if (!tifm_ms_transfer_data(host)) {
host->cmd_flags |= FIFO_READY;
rc = tifm_ms_check_status(host);
}
host_status, host->cmd_flags);
if (host->req) {
- if (host_status & TIFM_MS_TIMEOUT)
+ if (host_status & TIFM_MS_STAT_TOE)
host->req->error = -ETIME;
- else if (host_status & TIFM_MS_BADCRC)
+ else if (host_status & TIFM_MS_STAT_CRC)
host->req->error = -EILSEQ;
if (host->req->error) {
writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL);
}
- if (host_status & TIFM_MS_EOTPC)
+ if (host_status & TIFM_MS_STAT_RDY)
host->cmd_flags |= CMD_READY;
- if (host_status & TIFM_MS_INT)
- host->cmd_flags |= CARD_READY;
+
+ if (host_status & TIFM_MS_STAT_MSINT)
+ host->cmd_flags |= CARD_INT;
rc = tifm_ms_check_status(host);
}
- writel(TIFM_MS_SYS_NOT_RDY | readl(sock->addr + SOCK_MS_SYSTEM),
- sock->addr + SOCK_MS_SYSTEM);
- writel((~TIFM_MS_SYS_DATA) & readl(sock->addr + SOCK_MS_SYSTEM),
+ writel(TIFM_MS_SYS_INTCLR | readl(sock->addr + SOCK_MS_SYSTEM),
sock->addr + SOCK_MS_SYSTEM);
if (!rc)
switch (param) {
case MEMSTICK_POWER:
- /* this is set by card detection mechanism */
+ /* also affected by media detection mechanism */
+ if (value == MEMSTICK_POWER_ON) {
+ host->mode_mask = TIFM_MS_SYS_SRAC | TIFM_MS_SYS_REI;
+ writel(TIFM_MS_SYS_RESET, sock->addr + SOCK_MS_SYSTEM);
+ writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
+ sock->addr + SOCK_MS_SYSTEM);
+ writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
+ } else if (value == MEMSTICK_POWER_OFF) {
+ writel(TIFM_MS_SYS_FCLR | TIFM_MS_SYS_INTCLR,
+ sock->addr + SOCK_MS_SYSTEM);
+ writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
+ }
break;
case MEMSTICK_INTERFACE:
if (value == MEMSTICK_SERIAL) {
- host->mode_mask = TIFM_MS_SERIAL;
+ host->mode_mask = TIFM_MS_SYS_SRAC | TIFM_MS_SYS_REI;
writel((~TIFM_CTRL_FAST_CLK)
& readl(sock->addr + SOCK_CONTROL),
sock->addr + SOCK_CONTROL);
- } else if (value == MEMSTICK_PARALLEL) {
+ } else if (value == MEMSTICK_PAR4) {
host->mode_mask = 0;
writel(TIFM_CTRL_FAST_CLK
| readl(sock->addr + SOCK_CONTROL),
tifm_eject(host->dev);
}
-static int tifm_ms_initialize_host(struct tifm_ms *host)
-{
- struct tifm_dev *sock = host->dev;
- struct memstick_host *msh = tifm_get_drvdata(sock);
-
- host->mode_mask = TIFM_MS_SERIAL;
- writel(0x8000, sock->addr + SOCK_MS_SYSTEM);
- writel(0x0200 | TIFM_MS_SYS_NOT_RDY, sock->addr + SOCK_MS_SYSTEM);
- writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
- if (tifm_has_ms_pif(sock))
- msh->caps |= MEMSTICK_CAP_PARALLEL;
-
- return 0;
-}
-
static int tifm_ms_probe(struct tifm_dev *sock)
{
struct memstick_host *msh;
tifm_set_drvdata(sock, msh);
host->dev = sock;
host->timeout_jiffies = msecs_to_jiffies(1000);
- host->no_dma = no_dma;
setup_timer(&host->timer, tifm_ms_abort, (unsigned long)host);
msh->set_param = tifm_ms_set_param;
sock->card_event = tifm_ms_card_event;
sock->data_event = tifm_ms_data_event;
- rc = tifm_ms_initialize_host(host);
+ if (tifm_has_ms_pif(sock))
+ msh->caps |= MEMSTICK_CAP_PAR4;
- if (!rc)
- rc = memstick_add_host(msh);
+ rc = memstick_add_host(msh);
if (!rc)
return 0;
writel(TIFM_FIFO_INT_SETALL,
sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
writel(TIFM_DMA_RESET, sock->addr + SOCK_DMA_CONTROL);
- if ((host->req->io_type == MEMSTICK_IO_SG) && !host->no_dma)
+ if (host->use_dma)
tifm_unmap_sg(sock, &host->req->sg, 1,
host->req->data_dir == READ
? PCI_DMA_TODEVICE
spin_unlock_irqrestore(&sock->lock, flags);
memstick_remove_host(msh);
-
- writel(0x0200 | TIFM_MS_SYS_NOT_RDY, sock->addr + SOCK_MS_SYSTEM);
- writel(0xffffffff, sock->addr + SOCK_MS_STATUS);
-
memstick_free_host(msh);
}
static int tifm_ms_suspend(struct tifm_dev *sock, pm_message_t state)
{
+ struct memstick_host *msh = tifm_get_drvdata(sock);
+
+ memstick_suspend_host(msh);
return 0;
}
static int tifm_ms_resume(struct tifm_dev *sock)
{
struct memstick_host *msh = tifm_get_drvdata(sock);
- struct tifm_ms *host = memstick_priv(msh);
-
- tifm_ms_initialize_host(host);
- memstick_detect_change(msh);
+ memstick_resume_host(msh);
return 0;
}
MODULE_DESCRIPTION("TI FlashMedia MemoryStick driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(tifm, tifm_ms_id_tbl);
-MODULE_VERSION(DRIVER_VERSION);
module_init(tifm_ms_init);
module_exit(tifm_ms_exit);
if (error)
goto out_free_consistent;
+ if (!buffer->NumPhys) {
+ error = -ENODEV;
+ goto out_free_consistent;
+ }
+
/* save config data */
port_info->num_phys = buffer->NumPhys;
port_info->phy_info = kcalloc(port_info->num_phys,
if (rc)
goto err_out_irq;
+ writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1),
+ fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1),
fm->addr + FM_SET_INTERRUPT_ENABLE);
return 0;
mutex_unlock(&ubi_devices_mutex);
if (err < 0) {
put_mtd_device(mtd);
- printk(KERN_ERR "UBI error: cannot attach %s\n",
- p->name);
+ printk(KERN_ERR "UBI error: cannot attach mtd%d\n",
+ mtd->index);
goto out_detach;
}
}
void *upd_buf;
int *eba_tbl;
- int checked:1;
- int corrupted:1;
- int upd_marker:1;
- int updating:1;
- int changing_leb:1;
+ unsigned int checked:1;
+ unsigned int corrupted:1;
+ unsigned int upd_marker:1;
+ unsigned int updating:1;
+ unsigned int changing_leb:1;
#ifdef CONFIG_MTD_UBI_GLUEBI
/*
get_device(&vol->dev);
volume_sysfs_close(vol);
out_gluebi:
- ubi_destroy_gluebi(vol);
+ if (ubi_destroy_gluebi(vol))
+ dbg_err("cannot destroy gluebi for volume %d:%d",
+ ubi->ubi_num, vol_id);
out_cdev:
cdev_del(&vol->cdev);
out_mapping:
if (ubi->autoresize_vol_id != -1) {
ubi_err("more then one auto-resize volume (%d "
"and %d)", ubi->autoresize_vol_id, i);
+ kfree(vol);
return -EINVAL;
}
module will be called ps3_gelic.
config GELIC_WIRELESS
- bool "PS3 Wireless support"
- depends on GELIC_NET
- select WIRELESS_EXT
- help
- This option adds the support for the wireless feature of PS3.
- If you have the wireless-less model of PS3 or have no plan to
- use wireless feature, disabling this option saves memory. As
- the driver automatically distinguishes the models, you can
- safely enable this option even if you have a wireless-less model.
+ bool "PS3 Wireless support"
+ depends on GELIC_NET
+ select WIRELESS_EXT
+ help
+ This option adds the support for the wireless feature of PS3.
+ If you have the wireless-less model of PS3 or have no plan to
+ use wireless feature, disabling this option saves memory. As
+ the driver automatically distinguishes the models, you can
+ safely enable this option even if you have a wireless-less model.
config GIANFAR
tristate "Gianfar Ethernet"
config EHEA
tristate "eHEA Ethernet support"
- depends on IBMEBUS && INET
+ depends on IBMEBUS && INET && SPARSEMEM
select INET_LRO
---help---
This driver supports the IBM pSeries eHEA ethernet adapter.
MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver");
MODULE_LICENSE("GPL");
-int __init init_module(void)
+static int __init ac3200_module_init(void)
{
struct net_device *dev;
int this_dev, found = 0;
iounmap(ei_status.mem);
}
-void __exit
-cleanup_module(void)
+static void __exit ac3200_module_exit(void)
{
int this_dev;
}
}
}
+module_init(ac3200_module_init);
+module_exit(ac3200_module_exit);
#endif /* MODULE */
#ifdef MODULE
static struct net_device *apne_dev;
-int __init init_module(void)
+static int __init apne_module_init(void)
{
apne_dev = apne_probe(-1);
if (IS_ERR(apne_dev))
return 0;
}
-void __exit cleanup_module(void)
+static void __exit apne_module_exit(void)
{
unregister_netdev(apne_dev);
free_netdev(apne_dev);
}
-
+module_init(apne_module_init);
+module_exit(apne_module_exit);
#endif
static int init_pcmcia(void)
module_param(dma, int, 0);
-int __init init_module(void)
+static int __init ltpc_module_init(void)
{
if(io == 0)
printk(KERN_NOTICE
return PTR_ERR(dev_ltpc);
return 0;
}
+module_init(ltpc_module_init);
#endif
static void __exit ltpc_cleanup(void)
#ifdef MODULE
-int __init init_module(void)
+static int __init capmode_module_init(void)
{
printk(VERSION);
arcnet_cap_init();
return 0;
}
-void cleanup_module(void)
+static void __exit capmode_module_exit(void)
{
arcnet_unregister_proto(&capmode_proto);
}
+module_init(capmode_module_init);
+module_exit(capmode_module_exit);
MODULE_LICENSE("GPL");
#endif /* MODULE */
/***************************** Prototypes *****************************/
-static int addr_accessible( volatile void *regp, int wordflag, int
- writeflag );
static unsigned long lance_probe1( struct net_device *dev, struct lance_addr
*init_rec );
static int lance_open( struct net_device *dev );
/* Derived from hwreg_present() in atari/config.c: */
-static int __init addr_accessible( volatile void *regp, int wordflag, int writeflag )
+static noinline int __init addr_accessible(volatile void *regp, int wordflag,
+ int writeflag)
{
int ret;
long flags;
}
}
-#ifdef CONFIG_PM
static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
+ e100_down(nic);
netif_device_detach(netdev);
pci_save_state(pdev);
pci_enable_wake(pdev, PCI_D3cold, 0);
}
- free_irq(pdev->irq, netdev);
-
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
+#ifdef CONFIG_PM
static int e100_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
static void e100_shutdown(struct pci_dev *pdev)
{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- if (netif_running(netdev))
- napi_disable(&nic->napi);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
-
- if ((nic->flags & wol_magic) | e100_asf(nic)) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
- }
-
- free_irq(pdev->irq, netdev);
-
- pci_disable_device(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
+ e100_suspend(pdev, PMSG_SUSPEND);
}
/* ------------------ PCI Error Recovery infrastructure -------------- */
if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
ndev->stats.rx_frame_errors++;
} else {
- skb = dev_alloc_skb(len);
+ skb = dev_alloc_skb(len + NET_IP_ALIGN);
if (!skb) {
if (netif_msg_rx_err(priv))
dev_err(&ndev->dev,
ndev->stats.rx_dropped++;
} else {
skb->dev = ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
/* copy the packet from the receive buffer */
enc28j60_mem_read(priv, priv->next_pk_ptr + sizeof(rsv),
len, skb_put(skb, len));
(link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
"10 Gbps" :
(link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gpbs" : "unknown speed")),
+ "1 Gbps" : "unknown speed")),
((FLOW_RX && FLOW_TX) ? "RX/TX" :
(FLOW_RX ? "RX" :
(FLOW_TX ? "TX" : "None"))));
MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
" and Dale Farnsworth");
MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
+MODULE_ALIAS("platform:mv643xx_eth");
/*
* The second part is the low level driver of the gigE ethernet ports.
}
}
- if (interrupts && ei_debug)
+ if (interrupts && ei_debug > 3)
{
handled = 1;
if (nr_serviced >= MAX_SERVICE)
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+ depends on PHYLIB=y
---help---
Adds the platform "fixed" MDIO Bus to cover the boards that use
PHYs that are not connected to the real MDIO bus.
#define MII_DM9161_SCR 0x10
#define MII_DM9161_SCR_INIT 0x0610
+#define MII_DM9161_SCR_RMII 0x0100
/* DM9161 Interrupt Register */
#define MII_DM9161_INTR 0x15
static int dm9161_config_init(struct phy_device *phydev)
{
- int err;
+ int err, temp;
/* Isolate the PHY */
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
if (err < 0)
return err;
- /* Do not bypass the scrambler/descrambler */
- err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+ switch (phydev->interface) {
+ case PHY_INTERFACE_MODE_MII:
+ temp = MII_DM9161_SCR_INIT;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ temp = MII_DM9161_SCR_INIT | MII_DM9161_SCR_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* Do not bypass the scrambler/descrambler */
+ err = phy_write(phydev, MII_DM9161_SCR, temp);
if (err < 0)
return err;
struct pppol2tp_session *session;
struct hlist_node *walk;
- read_lock(&tunnel->hlist_lock);
+ read_lock_bh(&tunnel->hlist_lock);
hlist_for_each_entry(session, walk, session_list, hlist) {
if (session->tunnel_addr.s_session == session_id) {
- read_unlock(&tunnel->hlist_lock);
+ read_unlock_bh(&tunnel->hlist_lock);
return session;
}
}
- read_unlock(&tunnel->hlist_lock);
+ read_unlock_bh(&tunnel->hlist_lock);
return NULL;
}
{
struct pppol2tp_tunnel *tunnel = NULL;
- read_lock(&pppol2tp_tunnel_list_lock);
+ read_lock_bh(&pppol2tp_tunnel_list_lock);
list_for_each_entry(tunnel, &pppol2tp_tunnel_list, list) {
if (tunnel->stats.tunnel_id == tunnel_id) {
- read_unlock(&pppol2tp_tunnel_list_lock);
+ read_unlock_bh(&pppol2tp_tunnel_list_lock);
return tunnel;
}
}
- read_unlock(&pppol2tp_tunnel_list_lock);
+ read_unlock_bh(&pppol2tp_tunnel_list_lock);
return NULL;
}
static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_buff *skb)
{
struct sk_buff *skbp;
+ struct sk_buff *tmp;
u16 ns = PPPOL2TP_SKB_CB(skb)->ns;
- spin_lock(&session->reorder_q.lock);
- skb_queue_walk(&session->reorder_q, skbp) {
+ spin_lock_bh(&session->reorder_q.lock);
+ skb_queue_walk_safe(&session->reorder_q, skbp, tmp) {
if (PPPOL2TP_SKB_CB(skbp)->ns > ns) {
__skb_insert(skb, skbp->prev, skbp, &session->reorder_q);
PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
__skb_queue_tail(&session->reorder_q, skb);
out:
- spin_unlock(&session->reorder_q.lock);
+ spin_unlock_bh(&session->reorder_q.lock);
}
/* Dequeue a single skb.
int length = PPPOL2TP_SKB_CB(skb)->length;
struct sock *session_sock = NULL;
- /* We're about to requeue the skb, so unlink it and return resources
+ /* We're about to requeue the skb, so return resources
* to its current owner (a socket receive buffer).
*/
- skb_unlink(skb, &session->reorder_q);
skb_orphan(skb);
tunnel->stats.rx_packets++;
* expect to send up next, dequeue it and any other
* in-sequence packets behind it.
*/
- spin_lock(&session->reorder_q.lock);
+ spin_lock_bh(&session->reorder_q.lock);
skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
if (time_after(jiffies, PPPOL2TP_SKB_CB(skb)->expires)) {
session->stats.rx_seq_discards++;
goto out;
}
}
- spin_unlock(&session->reorder_q.lock);
+ __skb_unlink(skb, &session->reorder_q);
+
+ /* Process the skb. We release the queue lock while we
+ * do so to let other contexts process the queue.
+ */
+ spin_unlock_bh(&session->reorder_q.lock);
pppol2tp_recv_dequeue_skb(session, skb);
- spin_lock(&session->reorder_q.lock);
+ spin_lock_bh(&session->reorder_q.lock);
}
out:
- spin_unlock(&session->reorder_q.lock);
+ spin_unlock_bh(&session->reorder_q.lock);
}
/* Internal receive frame. Do the real work of receiving an L2TP data frame
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
- skb->dst = sk_dst_get(sk_tun);
+ skb->dst = dst_clone(__sk_dst_get(sk_tun));
skb_orphan(skb);
skb->sk = sk_tun;
PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
"%s: closing all sessions...\n", tunnel->name);
- write_lock(&tunnel->hlist_lock);
+ write_lock_bh(&tunnel->hlist_lock);
for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) {
again:
hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) {
* disappear as we're jumping between locks.
*/
sock_hold(sk);
- write_unlock(&tunnel->hlist_lock);
+ write_unlock_bh(&tunnel->hlist_lock);
lock_sock(sk);
if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
* list so we are guaranteed to make forward
* progress.
*/
- write_lock(&tunnel->hlist_lock);
+ write_lock_bh(&tunnel->hlist_lock);
goto again;
}
}
- write_unlock(&tunnel->hlist_lock);
+ write_unlock_bh(&tunnel->hlist_lock);
}
/* Really kill the tunnel.
static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel)
{
/* Remove from socket list */
- write_lock(&pppol2tp_tunnel_list_lock);
+ write_lock_bh(&pppol2tp_tunnel_list_lock);
list_del_init(&tunnel->list);
- write_unlock(&pppol2tp_tunnel_list_lock);
+ write_unlock_bh(&pppol2tp_tunnel_list_lock);
atomic_dec(&pppol2tp_tunnel_count);
kfree(tunnel);
/* Delete the session socket from the
* hash
*/
- write_lock(&tunnel->hlist_lock);
+ write_lock_bh(&tunnel->hlist_lock);
hlist_del_init(&session->hlist);
- write_unlock(&tunnel->hlist_lock);
+ write_unlock_bh(&tunnel->hlist_lock);
atomic_dec(&pppol2tp_session_count);
}
/* Add tunnel to our list */
INIT_LIST_HEAD(&tunnel->list);
- write_lock(&pppol2tp_tunnel_list_lock);
+ write_lock_bh(&pppol2tp_tunnel_list_lock);
list_add(&tunnel->list, &pppol2tp_tunnel_list);
- write_unlock(&pppol2tp_tunnel_list_lock);
+ write_unlock_bh(&pppol2tp_tunnel_list_lock);
atomic_inc(&pppol2tp_tunnel_count);
/* Bump the reference count. The tunnel context is deleted
sk->sk_user_data = session;
/* Add session to the tunnel's hash list */
- write_lock(&tunnel->hlist_lock);
+ write_lock_bh(&tunnel->hlist_lock);
hlist_add_head(&session->hlist,
pppol2tp_session_id_hash(tunnel,
session->tunnel_addr.s_session));
- write_unlock(&tunnel->hlist_lock);
+ write_unlock_bh(&tunnel->hlist_lock);
atomic_inc(&pppol2tp_session_count);
int next = 0;
int i;
- read_lock(&tunnel->hlist_lock);
+ read_lock_bh(&tunnel->hlist_lock);
for (i = 0; i < PPPOL2TP_HASH_SIZE; i++) {
hlist_for_each_entry(session, walk, &tunnel->session_hlist[i], hlist) {
if (curr == NULL) {
}
}
out:
- read_unlock(&tunnel->hlist_lock);
+ read_unlock_bh(&tunnel->hlist_lock);
if (!found)
session = NULL;
{
struct pppol2tp_tunnel *tunnel = NULL;
- read_lock(&pppol2tp_tunnel_list_lock);
+ read_lock_bh(&pppol2tp_tunnel_list_lock);
if (list_is_last(&curr->list, &pppol2tp_tunnel_list)) {
goto out;
}
tunnel = list_entry(curr->list.next, struct pppol2tp_tunnel, list);
out:
- read_unlock(&pppol2tp_tunnel_list_lock);
+ read_unlock_bh(&pppol2tp_tunnel_list_lock);
return tunnel;
}
* '-1' on failure
*/
-int init_tti(struct s2io_nic *nic, int link)
+static int init_tti(struct s2io_nic *nic, int link)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
unsigned media = de->media_type;
u32 macmode = dr32(MacMode);
- BUG_ON(de_is_running(de));
+ if (de_is_running(de))
+ printk(KERN_WARNING "%s: chip is running while changing media!\n", de->dev->name);
if (de->de21040)
dw32(CSR11, FULL_DUPLEX_MAGIC);
}
-static __inline void
+static inline void
send_complete( struct net_local *nl )
{
#ifdef CONFIG_SBNI_MULTILINE
goto done;
}
if (respcmd != CMD_RET(curcmd) &&
- respcmd != CMD_802_11_ASSOCIATE && curcmd != CMD_RET_802_11_ASSOCIATE) {
+ respcmd != CMD_RET_802_11_ASSOCIATE && curcmd != CMD_802_11_ASSOCIATE) {
lbs_pr_info("Invalid CMD_RESP %x to command %x!\n", respcmd, curcmd);
spin_unlock_irqrestore(&priv->driver_lock, flags);
ret = -1;
* Apply some rules to the filters:
* - Some filters imply different filters to be set.
* - Some things we can't filter out at all.
+ * - Multicast filter seems to kill broadcast traffic so never use it.
*/
- if (mc_count)
- *total_flags |= FIF_ALLMULTI;
+ *total_flags |= FIF_ALLMULTI;
if (*total_flags & FIF_OTHER_BSS ||
*total_flags & FIF_PROMISC_IN_BSS)
*total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
* Apply some rules to the filters:
* - Some filters imply different filters to be set.
* - Some things we can't filter out at all.
+ * - Multicast filter seems to kill broadcast traffic so never use it.
*/
- if (mc_count)
- *total_flags |= FIF_ALLMULTI;
+ *total_flags |= FIF_ALLMULTI;
if (*total_flags & FIF_OTHER_BSS ||
*total_flags & FIF_PROMISC_IN_BSS)
*total_flags |= FIF_PROMISC_IN_BSS | FIF_OTHER_BSS;
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gemtek */
{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
/* Gigabyte */
** ggg sacrifices another 710 to the computer gods.
*/
- boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, 1 << IOVP_SHIFT);
- boundary_size >>= IOVP_SHIFT;
+ boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+ 1ULL << IOVP_SHIFT) >> IOVP_SHIFT;
if (pages_needed <= 8) {
/*
unsigned long shift;
int ret;
- boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, 1 << IOVP_SHIFT);
- boundary_size >>= IOVP_SHIFT;
+ boundary_size = ALIGN((unsigned long long)dma_get_seg_boundary(dev) + 1,
+ 1ULL << IOVP_SHIFT) >> IOVP_SHIFT;
#if defined(ZX1_SUPPORT)
BUG_ON(ioc->ibase & ~IOVP_MASK);
bus_info_ptr1 = ibmphp_find_same_bus_num (hpc_ptr->slots[index].slot_bus_num);
if (!bus_info_ptr1) {
+ kfree(tmp_slot);
rc = -ENODEV;
goto error;
}
#include <linux/slab.h>
#include <linux/pnp.h>
#include <linux/io.h>
-#include <linux/dmi.h>
#include <linux/kallsyms.h>
#include "base.h"
"pnp: SB audio device quirk - increasing port range\n");
}
-static void quirk_supermicro_h8dce_system(struct pnp_dev *dev)
+
+#include <linux/pci.h>
+
+static void quirk_system_pci_resources(struct pnp_dev *dev)
{
- int i;
- static struct dmi_system_id supermicro_h8dce[] = {
- {
- .ident = "Supermicro H8DCE",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "Supermicro"),
- DMI_MATCH(DMI_PRODUCT_NAME, "H8DCE"),
- },
- },
- { }
- };
-
- if (!dmi_check_system(supermicro_h8dce))
- return;
+ struct pci_dev *pdev = NULL;
+ resource_size_t pnp_start, pnp_end, pci_start, pci_end;
+ int i, j;
/*
- * On the Supermicro H8DCE, there's a system device with resources
- * that overlap BAR 6 of the built-in SATA PCI adapter. If the PNP
- * system device claims them, the sata_nv driver won't be able to.
- * More details at:
- * https://bugzilla.redhat.com/show_bug.cgi?id=280641
- * https://bugzilla.redhat.com/show_bug.cgi?id=313491
- * http://lkml.org/lkml/2008/1/9/449
- * http://thread.gmane.org/gmane.linux.acpi.devel/27312
+ * Some BIOSes have PNP motherboard devices with resources that
+ * partially overlap PCI BARs. The PNP system driver claims these
+ * motherboard resources, which prevents the normal PCI driver from
+ * requesting them later.
+ *
+ * This patch disables the PNP resources that conflict with PCI BARs
+ * so they won't be claimed by the PNP system driver.
*/
- for (i = 0; i < PNP_MAX_MEM; i++) {
- if (pnp_mem_valid(dev, i) && pnp_mem_len(dev, i) &&
- (pnp_mem_start(dev, i) & 0xdfef0000) == 0xdfef0000) {
- dev_warn(&dev->dev, "disabling 0x%llx-0x%llx to prevent"
- " conflict with sata_nv PCI device\n",
- (unsigned long long) pnp_mem_start(dev, i),
- (unsigned long long) (pnp_mem_start(dev, i) +
- pnp_mem_len(dev, i) - 1));
- pnp_mem_flags(dev, i) = 0;
+ for_each_pci_dev(pdev) {
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ if (!(pci_resource_flags(pdev, i) & IORESOURCE_MEM) ||
+ pci_resource_len(pdev, i) == 0)
+ continue;
+
+ pci_start = pci_resource_start(pdev, i);
+ pci_end = pci_resource_end(pdev, i);
+ for (j = 0; j < PNP_MAX_MEM; j++) {
+ if (!pnp_mem_valid(dev, j) ||
+ pnp_mem_len(dev, j) == 0)
+ continue;
+
+ pnp_start = pnp_mem_start(dev, j);
+ pnp_end = pnp_mem_end(dev, j);
+
+ /*
+ * If the PNP region doesn't overlap the PCI
+ * region at all, there's no problem.
+ */
+ if (pnp_end < pci_start || pnp_start > pci_end)
+ continue;
+
+ /*
+ * If the PNP region completely encloses (or is
+ * at least as large as) the PCI region, that's
+ * also OK. For example, this happens when the
+ * PNP device describes a bridge with PCI
+ * behind it.
+ */
+ if (pnp_start <= pci_start &&
+ pnp_end >= pci_end)
+ continue;
+
+ /*
+ * Otherwise, the PNP region overlaps *part* of
+ * the PCI region, and that might prevent a PCI
+ * driver from requesting its resources.
+ */
+ dev_warn(&dev->dev, "mem resource "
+ "(0x%llx-0x%llx) overlaps %s BAR %d "
+ "(0x%llx-0x%llx), disabling\n",
+ (unsigned long long) pnp_start,
+ (unsigned long long) pnp_end,
+ pci_name(pdev), i,
+ (unsigned long long) pci_start,
+ (unsigned long long) pci_end);
+ pnp_mem_flags(dev, j) = 0;
+ }
}
}
}
{"CTL0043", quirk_sb16audio_resources},
{"CTL0044", quirk_sb16audio_resources},
{"CTL0045", quirk_sb16audio_resources},
- {"PNP0c01", quirk_supermicro_h8dce_system},
- {"PNP0c02", quirk_supermicro_h8dce_system},
+ {"PNP0c01", quirk_system_pci_resources},
+ {"PNP0c02", quirk_system_pci_resources},
{""}
};
dasd_3990_erp_error_match(struct dasd_ccw_req *cqr1, struct dasd_ccw_req *cqr2)
{
- /* check failed CCW */
- if (cqr1->irb.scsw.cpa != cqr2->irb.scsw.cpa) {
- // return 0; /* CCW doesn't match */
- }
+ if (cqr1->startdev != cqr2->startdev)
+ return 0;
if (cqr1->irb.esw.esw0.erw.cons != cqr2->irb.esw.esw0.erw.cons)
return 0;
return 0;
if (device->block)
block = device->block;
- else
+ else {
+ dasd_put_device(device);
return 0;
+ }
/* Print device number. */
seq_printf(m, "%s", device->cdev->dev.bus_id);
/* Print discipline string. */
sclp_vt220_emit_current();
}
-#define BUFFER_MAX_DELAY HZ/2
+#define BUFFER_MAX_DELAY HZ/20
/*
* Internal implementation of the write function. Write COUNT bytes of data
int rc;
ap_dev->drv = ap_drv;
- spin_lock_bh(&ap_device_lock);
- list_add(&ap_dev->list, &ap_device_list);
- spin_unlock_bh(&ap_device_lock);
rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
+ if (!rc) {
+ spin_lock_bh(&ap_device_lock);
+ list_add(&ap_dev->list, &ap_device_list);
+ spin_unlock_bh(&ap_device_lock);
+ }
return rc;
}
ap_flush_queue(ap_dev);
del_timer_sync(&ap_dev->timeout);
- if (ap_drv->remove)
- ap_drv->remove(ap_dev);
spin_lock_bh(&ap_device_lock);
list_del_init(&ap_dev->list);
spin_unlock_bh(&ap_device_lock);
+ if (ap_drv->remove)
+ ap_drv->remove(ap_dev);
spin_lock_bh(&ap_dev->lock);
atomic_sub(ap_dev->queue_count, &ap_poll_requests);
spin_unlock_bh(&ap_dev->lock);
int asd_clear_aca(struct domain_device *, u8 *lun);
int asd_clear_task_set(struct domain_device *, u8 *lun);
int asd_lu_reset(struct domain_device *, u8 *lun);
+int asd_I_T_nexus_reset(struct domain_device *dev);
int asd_query_task(struct sas_task *);
/* ---------- Adapter and Port management ---------- */
/* internally generated command */
struct timer_list timer;
- struct completion completion;
+ struct completion *completion;
u8 tag_valid:1;
__be16 tag; /* error recovery only */
ascb->timer.function = NULL;
init_timer(&ascb->timer);
ascb->tc_index = -1;
- init_completion(&ascb->completion);
}
/* Must be called with the tc_index_lock held!
.lldd_abort_task_set = asd_abort_task_set,
.lldd_clear_aca = asd_clear_aca,
.lldd_clear_task_set = asd_clear_task_set,
- .lldd_I_T_nexus_reset = NULL,
+ .lldd_I_T_nexus_reset = asd_I_T_nexus_reset,
.lldd_lu_reset = asd_lu_reset,
.lldd_query_task = asd_query_task,
task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
task->task_state_flags |= SAS_TASK_STATE_DONE;
if (unlikely((task->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+ struct completion *completion = ascb->completion;
spin_unlock_irqrestore(&task->task_state_lock, flags);
ASD_DPRINTK("task 0x%p done with opcode 0x%x resp 0x%x "
"stat 0x%x but aborted by upper layer!\n",
task, opcode, ts->resp, ts->stat);
- complete(&ascb->completion);
+ if (completion)
+ complete(completion);
} else {
spin_unlock_irqrestore(&task->task_state_lock, flags);
task->lldd_task = NULL;
return res;
}
-static inline void asd_timedout_common(unsigned long data)
-{
- struct asd_ascb *ascb = (void *) data;
- struct asd_seq_data *seq = &ascb->ha->seq;
- unsigned long flags;
+/* ---------- CLEAR NEXUS ---------- */
- spin_lock_irqsave(&seq->pend_q_lock, flags);
- seq->pending--;
- list_del_init(&ascb->list);
- spin_unlock_irqrestore(&seq->pend_q_lock, flags);
-}
+struct tasklet_completion_status {
+ int dl_opcode;
+ int tmf_state;
+ u8 tag_valid:1;
+ __be16 tag;
+};
+
+#define DECLARE_TCS(tcs) \
+ struct tasklet_completion_status tcs = { \
+ .dl_opcode = 0, \
+ .tmf_state = 0, \
+ .tag_valid = 0, \
+ .tag = 0, \
+ }
-/* ---------- CLEAR NEXUS ---------- */
static void asd_clear_nexus_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("%s: here\n", __FUNCTION__);
if (!del_timer(&ascb->timer)) {
ASD_DPRINTK("%s: couldn't delete timer\n", __FUNCTION__);
return;
}
ASD_DPRINTK("%s: opcode: 0x%x\n", __FUNCTION__, dl->opcode);
- ascb->uldd_task = (void *) (unsigned long) dl->opcode;
- complete(&ascb->completion);
+ tcs->dl_opcode = dl->opcode;
+ complete(ascb->completion);
+ asd_ascb_free(ascb);
}
static void asd_clear_nexus_timedout(unsigned long data)
{
- struct asd_ascb *ascb = (void *) data;
+ struct asd_ascb *ascb = (void *)data;
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("%s: here\n", __FUNCTION__);
- asd_timedout_common(data);
- ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
- complete(&ascb->completion);
+ tcs->dl_opcode = TMF_RESP_FUNC_FAILED;
+ complete(ascb->completion);
}
#define CLEAR_NEXUS_PRE \
+ struct asd_ascb *ascb; \
+ struct scb *scb; \
+ int res; \
+ DECLARE_COMPLETION_ONSTACK(completion); \
+ DECLARE_TCS(tcs); \
+ \
ASD_DPRINTK("%s: PRE\n", __FUNCTION__); \
res = 1; \
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL); \
if (!ascb) \
return -ENOMEM; \
\
+ ascb->completion = &completion; \
+ ascb->uldd_task = &tcs; \
scb = ascb->scb; \
scb->header.opcode = CLEAR_NEXUS
if (res) \
goto out_err; \
ASD_DPRINTK("%s: clear nexus posted, waiting...\n", __FUNCTION__); \
- wait_for_completion(&ascb->completion); \
- res = (int) (unsigned long) ascb->uldd_task; \
+ wait_for_completion(&completion); \
+ res = tcs.dl_opcode; \
if (res == TC_NO_ERROR) \
res = TMF_RESP_FUNC_COMPLETE; \
+ return res; \
out_err: \
asd_ascb_free(ascb); \
return res
int asd_clear_nexus_ha(struct sas_ha_struct *sas_ha)
{
struct asd_ha_struct *asd_ha = sas_ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_ADAPTER;
int asd_clear_nexus_port(struct asd_sas_port *port)
{
struct asd_ha_struct *asd_ha = port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_PORT;
CLEAR_NEXUS_POST;
}
-#if 0
-static int asd_clear_nexus_I_T(struct domain_device *dev)
+enum clear_nexus_phase {
+ NEXUS_PHASE_PRE,
+ NEXUS_PHASE_POST,
+ NEXUS_PHASE_RESUME,
+};
+
+static int asd_clear_nexus_I_T(struct domain_device *dev,
+ enum clear_nexus_phase phase)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_I_T;
- scb->clear_nexus.flags = SEND_Q | EXEC_Q | NOTINQ;
+ switch (phase) {
+ case NEXUS_PHASE_PRE:
+ scb->clear_nexus.flags = EXEC_Q | SUSPEND_TX;
+ break;
+ case NEXUS_PHASE_POST:
+ scb->clear_nexus.flags = SEND_Q | NOTINQ;
+ break;
+ case NEXUS_PHASE_RESUME:
+ scb->clear_nexus.flags = RESUME_TX;
+ }
scb->clear_nexus.conn_handle = cpu_to_le16((u16)(unsigned long)
dev->lldd_dev);
CLEAR_NEXUS_POST;
}
-#endif
+
+int asd_I_T_nexus_reset(struct domain_device *dev)
+{
+ int res, tmp_res, i;
+ struct sas_phy *phy = sas_find_local_phy(dev);
+ /* Standard mandates link reset for ATA (type 0) and
+ * hard reset for SSP (type 1) */
+ int reset_type = (dev->dev_type == SATA_DEV ||
+ (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+
+ asd_clear_nexus_I_T(dev, NEXUS_PHASE_PRE);
+ /* send a hard reset */
+ ASD_DPRINTK("sending %s reset to %s\n",
+ reset_type ? "hard" : "soft", phy->dev.bus_id);
+ res = sas_phy_reset(phy, reset_type);
+ if (res == TMF_RESP_FUNC_COMPLETE) {
+ /* wait for the maximum settle time */
+ msleep(500);
+ /* clear all outstanding commands (keep nexus suspended) */
+ asd_clear_nexus_I_T(dev, NEXUS_PHASE_POST);
+ }
+ for (i = 0 ; i < 3; i++) {
+ tmp_res = asd_clear_nexus_I_T(dev, NEXUS_PHASE_RESUME);
+ if (tmp_res == TC_RESUME)
+ return res;
+ msleep(500);
+ }
+
+ /* This is a bit of a problem: the sequencer is still suspended
+ * and is refusing to resume. Hope it will resume on a bigger hammer
+ * or the disk is lost */
+ dev_printk(KERN_ERR, &phy->dev,
+ "Failed to resume nexus after reset 0x%x\n", tmp_res);
+
+ return TMF_RESP_FUNC_FAILED;
+}
static int asd_clear_nexus_I_T_L(struct domain_device *dev, u8 *lun)
{
struct asd_ha_struct *asd_ha = dev->port->ha->lldd_ha;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_I_T_L;
{
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
struct asd_ascb *tascb = task->lldd_task;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_TAG;
{
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
struct asd_ascb *tascb = task->lldd_task;
- struct asd_ascb *ascb;
- struct scb *scb;
- int res;
CLEAR_NEXUS_PRE;
scb->clear_nexus.nexus = NEXUS_TRANS_CX;
static void asd_tmf_timedout(unsigned long data)
{
struct asd_ascb *ascb = (void *) data;
+ struct tasklet_completion_status *tcs = ascb->uldd_task;
ASD_DPRINTK("tmf timed out\n");
- asd_timedout_common(data);
- ascb->uldd_task = (void *) TMF_RESP_FUNC_FAILED;
- complete(&ascb->completion);
+ tcs->tmf_state = TMF_RESP_FUNC_FAILED;
+ complete(ascb->completion);
}
static int asd_get_tmf_resp_tasklet(struct asd_ascb *ascb,
static void asd_tmf_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
+ struct tasklet_completion_status *tcs;
+
if (!del_timer(&ascb->timer))
return;
+ tcs = ascb->uldd_task;
ASD_DPRINTK("tmf tasklet complete\n");
- if (dl->opcode == TC_SSP_RESP)
- ascb->uldd_task = (void *) (unsigned long)
- asd_get_tmf_resp_tasklet(ascb, dl);
- else
- ascb->uldd_task = (void *) 0xFF00 + (unsigned long) dl->opcode;
+ tcs->dl_opcode = dl->opcode;
+
+ if (dl->opcode == TC_SSP_RESP) {
+ tcs->tmf_state = asd_get_tmf_resp_tasklet(ascb, dl);
+ tcs->tag_valid = ascb->tag_valid;
+ tcs->tag = ascb->tag;
+ }
- complete(&ascb->completion);
+ complete(ascb->completion);
+ asd_ascb_free(ascb);
}
static inline int asd_clear_nexus(struct sas_task *task)
int res = TMF_RESP_FUNC_FAILED;
int leftover;
struct asd_ascb *tascb = task->lldd_task;
+ DECLARE_COMPLETION_ONSTACK(completion);
unsigned long flags;
+ tascb->completion = &completion;
+
ASD_DPRINTK("task not done, clearing nexus\n");
if (tascb->tag_valid)
res = asd_clear_nexus_tag(task);
else
res = asd_clear_nexus_index(task);
- leftover = wait_for_completion_timeout(&tascb->completion,
+ leftover = wait_for_completion_timeout(&completion,
AIC94XX_SCB_TIMEOUT);
+ tascb->completion = NULL;
ASD_DPRINTK("came back from clear nexus\n");
spin_lock_irqsave(&task->task_state_lock, flags);
if (leftover < 1)
struct asd_ascb *ascb = NULL;
struct scb *scb;
int leftover;
+ DECLARE_TCS(tcs);
+ DECLARE_COMPLETION_ONSTACK(completion);
+ DECLARE_COMPLETION_ONSTACK(tascb_completion);
+
+ tascb->completion = &tascb_completion;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
if (!ascb)
return -ENOMEM;
- scb = ascb->scb;
+ ascb->uldd_task = &tcs;
+ ascb->completion = &completion;
+ scb = ascb->scb;
scb->header.opcode = SCB_ABORT_TASK;
switch (task->task_proto) {
res = asd_enqueue_internal(ascb, asd_tmf_tasklet_complete,
asd_tmf_timedout);
if (res)
- goto out;
- wait_for_completion(&ascb->completion);
+ goto out_free;
+ wait_for_completion(&completion);
ASD_DPRINTK("tmf came back\n");
- res = (int) (unsigned long) ascb->uldd_task;
- tascb->tag = ascb->tag;
- tascb->tag_valid = ascb->tag_valid;
+ tascb->tag = tcs.tag;
+ tascb->tag_valid = tcs.tag_valid;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
- switch (res) {
- /* The task to be aborted has been sent to the device.
- * We got a Response IU for the ABORT TASK TMF. */
- case TC_NO_ERROR + 0xFF00:
- case TMF_RESP_FUNC_COMPLETE:
- case TMF_RESP_FUNC_FAILED:
- res = asd_clear_nexus(task);
- break;
- case TMF_RESP_INVALID_FRAME:
- case TMF_RESP_OVERLAPPED_TAG:
- case TMF_RESP_FUNC_ESUPP:
- case TMF_RESP_NO_LUN:
- goto out_done; break;
- }
- /* In the following we assume that the managing layer
- * will _never_ make a mistake, when issuing ABORT TASK.
- */
- switch (res) {
- default:
- res = asd_clear_nexus(task);
- /* fallthrough */
- case TC_NO_ERROR + 0xFF00:
- case TMF_RESP_FUNC_COMPLETE:
- break;
- /* The task hasn't been sent to the device xor we never got
- * a (sane) Response IU for the ABORT TASK TMF.
- */
- case TF_NAK_RECV + 0xFF00:
- res = TMF_RESP_INVALID_FRAME;
- break;
- case TF_TMF_TASK_DONE + 0xFF00: /* done but not reported yet */
+ if (tcs.dl_opcode == TC_SSP_RESP) {
+ /* The task to be aborted has been sent to the device.
+ * We got a Response IU for the ABORT TASK TMF. */
+ if (tcs.tmf_state == TMF_RESP_FUNC_COMPLETE)
+ res = asd_clear_nexus(task);
+ else
+ res = tcs.tmf_state;
+ } else if (tcs.dl_opcode == TC_NO_ERROR &&
+ tcs.tmf_state == TMF_RESP_FUNC_FAILED) {
+ /* timeout */
res = TMF_RESP_FUNC_FAILED;
- leftover = wait_for_completion_timeout(&tascb->completion,
- AIC94XX_SCB_TIMEOUT);
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (leftover < 1)
+ } else {
+ /* In the following we assume that the managing layer
+ * will _never_ make a mistake, when issuing ABORT
+ * TASK.
+ */
+ switch (tcs.dl_opcode) {
+ default:
+ res = asd_clear_nexus(task);
+ /* fallthrough */
+ case TC_NO_ERROR:
+ break;
+ /* The task hasn't been sent to the device xor
+ * we never got a (sane) Response IU for the
+ * ABORT TASK TMF.
+ */
+ case TF_NAK_RECV:
+ res = TMF_RESP_INVALID_FRAME;
+ break;
+ case TF_TMF_TASK_DONE: /* done but not reported yet */
res = TMF_RESP_FUNC_FAILED;
- if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ leftover =
+ wait_for_completion_timeout(&tascb_completion,
+ AIC94XX_SCB_TIMEOUT);
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (leftover < 1)
+ res = TMF_RESP_FUNC_FAILED;
+ if (task->task_state_flags & SAS_TASK_STATE_DONE)
+ res = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ break;
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE: /* no such device */
res = TMF_RESP_FUNC_COMPLETE;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- goto out_done;
- case TF_TMF_NO_TAG + 0xFF00:
- case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
- case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
- res = TMF_RESP_FUNC_COMPLETE;
- goto out_done;
- case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
- res = TMF_RESP_FUNC_ESUPP;
- goto out;
+ break;
+ case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */
+ res = TMF_RESP_FUNC_ESUPP;
+ break;
+ }
}
-out_done:
+ out_done:
+ tascb->completion = NULL;
if (res == TMF_RESP_FUNC_COMPLETE) {
task->lldd_task = NULL;
mb();
asd_ascb_free(tascb);
}
-out:
+ ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
+ return res;
+
+ out_free:
asd_ascb_free(ascb);
ASD_DPRINTK("task 0x%p aborted, res: 0x%x\n", task, res);
return res;
struct asd_ascb *ascb;
int res = 1;
struct scb *scb;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ DECLARE_TCS(tcs);
if (!(dev->tproto & SAS_PROTOCOL_SSP))
return TMF_RESP_FUNC_ESUPP;
ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
if (!ascb)
return -ENOMEM;
+
+ ascb->completion = &completion;
+ ascb->uldd_task = &tcs;
scb = ascb->scb;
if (tmf == TMF_QUERY_TASK)
asd_tmf_timedout);
if (res)
goto out_err;
- wait_for_completion(&ascb->completion);
- res = (int) (unsigned long) ascb->uldd_task;
+ wait_for_completion(&completion);
- switch (res) {
- case TC_NO_ERROR + 0xFF00:
+ switch (tcs.dl_opcode) {
+ case TC_NO_ERROR:
res = TMF_RESP_FUNC_COMPLETE;
break;
- case TF_NAK_RECV + 0xFF00:
+ case TF_NAK_RECV:
res = TMF_RESP_INVALID_FRAME;
break;
- case TF_TMF_TASK_DONE + 0xFF00:
+ case TF_TMF_TASK_DONE:
res = TMF_RESP_FUNC_FAILED;
break;
- case TF_TMF_NO_TAG + 0xFF00:
- case TF_TMF_TAG_FREE + 0xFF00: /* the tag is in the free list */
- case TF_TMF_NO_CONN_HANDLE + 0xFF00: /* no such device */
+ case TF_TMF_NO_TAG:
+ case TF_TMF_TAG_FREE: /* the tag is in the free list */
+ case TF_TMF_NO_CONN_HANDLE: /* no such device */
res = TMF_RESP_FUNC_COMPLETE;
break;
- case TF_TMF_NO_CTX + 0xFF00: /* not in seq, or proto != SSP */
+ case TF_TMF_NO_CTX: /* not in seq, or proto != SSP */
res = TMF_RESP_FUNC_ESUPP;
break;
default:
/* Allow TMF response codes to propagate upwards */
+ res = tcs.dl_opcode;
break;
}
+ return res;
out_err:
asd_ascb_free(ascb);
return res;
/*The limit of outstanding scsi command that firmware can handle*/
#define ARCMSR_MAX_OUTSTANDING_CMD 256
#define ARCMSR_MAX_FREECCB_NUM 320
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2007/12/24"
+#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2008/02/27"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
static void gdth_clear_events(void);
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count, int to_buffer);
+ char *buffer, ushort count);
static int gdth_internal_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp);
static int gdth_fill_cache_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp, ushort hdrive);
unsigned int cmd, unsigned long arg);
static void gdth_flush(gdth_ha_str *ha);
-static int gdth_halt(struct notifier_block *nb, ulong event, void *buf);
static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
struct gdth_cmndinfo *cmndinfo);
#include "gdth_proc.h"
#include "gdth_proc.c"
-/* notifier block to get a notify on system shutdown/halt/reboot */
-static struct notifier_block gdth_notifier = {
- gdth_halt, NULL, 0
-};
-static int notifier_disabled = 0;
-
static gdth_ha_str *gdth_find_ha(int hanum)
{
gdth_ha_str *ha;
for (i=0; i<GDTH_MAXCMDS; ++i) {
if (ha->cmndinfo[i].index == 0) {
priv = &ha->cmndinfo[i];
- priv->index = i+1;
memset(priv, 0, sizeof(*priv));
+ priv->index = i+1;
break;
}
}
gdth_ha_str *ha = shost_priv(sdev->host);
Scsi_Cmnd *scp;
struct gdth_cmndinfo cmndinfo;
- struct scatterlist one_sg;
DECLARE_COMPLETION_ONSTACK(wait);
int rval;
/* use request field to save the ptr. to completion struct. */
scp->request = (struct request *)&wait;
scp->timeout_per_command = timeout*HZ;
- sg_init_one(&one_sg, gdtcmd, sizeof(*gdtcmd));
- gdth_set_sglist(scp, &one_sg);
- gdth_set_sg_count(scp, 1);
- gdth_set_bufflen(scp, sizeof(*gdtcmd));
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
cmndinfo.priority = IOCTL_PRI;
+ cmndinfo.internal_cmd_str = gdtcmd;
cmndinfo.internal_command = 1;
TRACE(("__gdth_execute() cmd 0x%x\n", scp->cmnd[0]));
* buffers, kmap_atomic() as needed.
*/
static void gdth_copy_internal_data(gdth_ha_str *ha, Scsi_Cmnd *scp,
- char *buffer, ushort count, int to_buffer)
+ char *buffer, ushort count)
{
ushort cpcount,i, max_sg = gdth_sg_count(scp);
ushort cpsum,cpnow;
}
local_irq_save(flags);
address = kmap_atomic(sg_page(sl), KM_BIO_SRC_IRQ) + sl->offset;
- if (to_buffer)
- memcpy(buffer, address, cpnow);
- else
- memcpy(address, buffer, cpnow);
+ memcpy(address, buffer, cpnow);
flush_dcache_page(sg_page(sl));
kunmap_atomic(address, KM_BIO_SRC_IRQ);
local_irq_restore(flags);
strcpy(inq.vendor,ha->oem_name);
sprintf(inq.product,"Host Drive #%02d",t);
strcpy(inq.revision," ");
- gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&inq, sizeof(gdth_inq_data));
break;
case REQUEST_SENSE:
sd.key = NO_SENSE;
sd.info = 0;
sd.add_length= 0;
- gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&sd, sizeof(gdth_sense_data));
break;
case MODE_SENSE:
mpd.bd.block_length[0] = (SECTOR_SIZE & 0x00ff0000) >> 16;
mpd.bd.block_length[1] = (SECTOR_SIZE & 0x0000ff00) >> 8;
mpd.bd.block_length[2] = (SECTOR_SIZE & 0x000000ff);
- gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&mpd, sizeof(gdth_modep_data));
break;
case READ_CAPACITY:
else
rdc.last_block_no = cpu_to_be32(ha->hdr[t].size-1);
rdc.block_length = cpu_to_be32(SECTOR_SIZE);
- gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data), 0);
+ gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data));
break;
case SERVICE_ACTION_IN:
rdc16.last_block_no = cpu_to_be64(ha->hdr[t].size-1);
rdc16.block_length = cpu_to_be32(SECTOR_SIZE);
gdth_copy_internal_data(ha, scp, (char*)&rdc16,
- sizeof(gdth_rdcap16_data), 0);
+ sizeof(gdth_rdcap16_data));
} else {
scp->result = DID_ABORT << 16;
}
static int gdth_special_cmd(gdth_ha_str *ha, Scsi_Cmnd *scp)
{
register gdth_cmd_str *cmdp;
+ struct gdth_cmndinfo *cmndinfo = gdth_cmnd_priv(scp);
int cmd_index;
cmdp= ha->pccb;
if (ha->type==GDT_EISA && ha->cmd_cnt>0)
return 0;
- gdth_copy_internal_data(ha, scp, (char *)cmdp, sizeof(gdth_cmd_str), 1);
+ *cmdp = *cmndinfo->internal_cmd_str;
cmdp->RequestBuffer = scp;
/* search free command index */
gdth_ha_str *ha;
ulong flags;
+ BUG_ON(list_empty(&gdth_instances));
+
ha = list_first_entry(&gdth_instances, gdth_ha_str, list);
spin_lock_irqsave(&ha->smp_lock, flags);
}
}
-/* shutdown routine */
-static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
-{
- gdth_ha_str *ha;
-#ifndef __alpha__
- gdth_cmd_str gdtcmd;
- char cmnd[MAX_COMMAND_SIZE];
-#endif
-
- if (notifier_disabled)
- return NOTIFY_OK;
-
- TRACE2(("gdth_halt() event %d\n",(int)event));
- if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
- return NOTIFY_DONE;
-
- notifier_disabled = 1;
- printk("GDT-HA: Flushing all host drives .. ");
- list_for_each_entry(ha, &gdth_instances, list) {
- gdth_flush(ha);
-
-#ifndef __alpha__
- /* controller reset */
- memset(cmnd, 0xff, MAX_COMMAND_SIZE);
- gdtcmd.BoardNode = LOCALBOARD;
- gdtcmd.Service = CACHESERVICE;
- gdtcmd.OpCode = GDT_RESET;
- TRACE2(("gdth_halt(): reset controller %d\n", ha->hanum));
- gdth_execute(ha->shost, &gdtcmd, cmnd, 10, NULL);
-#endif
- }
- printk("Done.\n");
-
-#ifdef GDTH_STATISTICS
- del_timer(&gdth_timer);
-#endif
- return NOTIFY_OK;
-}
-
/* configure lun */
static int gdth_slave_configure(struct scsi_device *sdev)
{
scsi_remove_host(shp);
+ gdth_flush(ha);
+
if (ha->sdev) {
scsi_free_host_dev(ha->sdev);
ha->sdev = NULL;
}
- gdth_flush(ha);
-
if (shp->irq)
free_irq(shp->irq,ha);
scsi_host_put(shp);
}
+static int gdth_halt(struct notifier_block *nb, ulong event, void *buf)
+{
+ gdth_ha_str *ha;
+
+ TRACE2(("gdth_halt() event %d\n", (int)event));
+ if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF)
+ return NOTIFY_DONE;
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_flush(ha);
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gdth_notifier = {
+ gdth_halt, NULL, 0
+};
+
static int __init gdth_init(void)
{
if (disable) {
add_timer(&gdth_timer);
#endif
major = register_chrdev(0,"gdth", &gdth_fops);
- notifier_disabled = 0;
register_reboot_notifier(&gdth_notifier);
gdth_polling = FALSE;
return 0;
{
gdth_ha_str *ha;
- list_for_each_entry(ha, &gdth_instances, list)
- gdth_remove_one(ha);
+ unregister_chrdev(major, "gdth");
+ unregister_reboot_notifier(&gdth_notifier);
#ifdef GDTH_STATISTICS
- del_timer(&gdth_timer);
+ del_timer_sync(&gdth_timer);
#endif
- unregister_chrdev(major,"gdth");
- unregister_reboot_notifier(&gdth_notifier);
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_remove_one(ha);
}
module_init(gdth_init);
struct gdth_cmndinfo { /* per-command private info */
int index;
int internal_command; /* don't call scsi_done */
+ gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/
dma_addr_t sense_paddr; /* sense dma-addr */
unchar priority;
int timeout;
int err = 0;
dprintk("%p %p %x %u\n", iue, target, vio_iu(iue)->srp.cmd.cdb[0],
- cmd->usg_sg);
+ scsi_sg_count(sc));
if (scsi_sg_count(sc))
err = srp_transfer_data(sc, &vio_iu(iue)->srp.cmd, ibmvstgt_rdma, 1, 1);
if (!shost)
goto free_vport;
shost->transportt = ibmvstgt_transport_template;
- err = scsi_tgt_alloc_queue(shost);
- if (err)
- goto put_host;
target = host_to_srp_target(shost);
target->shost = shost;
if (err)
goto destroy_queue;
+ err = scsi_tgt_alloc_queue(shost);
+ if (err)
+ goto destroy_queue;
+
return 0;
destroy_queue:
crq_queue_destroy(target);
qdepth = ISCSI_DEF_CMD_PER_LUN;
}
- if (!is_power_of_2(cmds_max) ||
- cmds_max >= ISCSI_MGMT_ITT_OFFSET) {
+ if (!is_power_of_2(cmds_max) || cmds_max >= ISCSI_MGMT_ITT_OFFSET ||
+ cmds_max < 2) {
if (cmds_max != 0)
printk(KERN_ERR "iscsi: invalid can_queue of %d. "
"can_queue must be a power of 2 and between "
struct domain_device *dev = ap->private_data;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
- int res = 0;
+ int res = TMF_RESP_FUNC_FAILED;
if (i->dft->lldd_I_T_nexus_reset)
res = i->dft->lldd_I_T_nexus_reset(dev);
- if (res)
+ if (res != TMF_RESP_FUNC_COMPLETE)
SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
switch (dev->sata_dev.command_set) {
return res;
}
-static void sas_sata_propagate_sas_addr(struct domain_device *dev)
-{
- unsigned long flags;
- struct asd_sas_port *port = dev->port;
- struct asd_sas_phy *phy;
-
- BUG_ON(dev->parent);
-
- memcpy(port->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
- spin_lock_irqsave(&port->phy_list_lock, flags);
- list_for_each_entry(phy, &port->phy_list, port_phy_el)
- memcpy(phy->attached_sas_addr, dev->sas_addr, SAS_ADDR_SIZE);
- spin_unlock_irqrestore(&port->phy_list_lock, flags);
-}
-
#define ATA_IDENTIFY_DEV 0xEC
#define ATA_IDENTIFY_PACKET_DEV 0xA1
#define ATA_SET_FEATURES 0xEF
goto out_err;
}
cont1:
- /* Get WWN */
- if (dev->port->oob_mode != SATA_OOB_MODE) {
- memcpy(dev->sas_addr, dev->sata_dev.rps_resp.rps.stp_sas_addr,
- SAS_ADDR_SIZE);
- } else if (dev->sata_dev.command_set == ATA_COMMAND_SET &&
- (le16_to_cpu(dev->sata_dev.identify_device[108]) & 0xF000)
- == 0x5000) {
- int i;
-
- for (i = 0; i < 4; i++) {
- dev->sas_addr[2*i] =
- (le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0xFF00) >> 8;
- dev->sas_addr[2*i+1] =
- le16_to_cpu(dev->sata_dev.identify_device[108+i]) & 0x00FF;
- }
- }
- sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr);
- if (!dev->parent)
- sas_sata_propagate_sas_addr(dev);
-
/* XXX Hint: register this SATA device with SATL.
When this returns, dev->sata_dev->lu is alive and
present.
if (!port->phy)
port->phy = phy->phy;
- SAS_DPRINTK("phy%d added to port%d, phy_mask:0x%x\n", phy->id,
- port->id, port->phy_mask);
-
if (*(u64 *)port->attached_sas_addr == 0) {
port->class = phy->class;
memcpy(port->attached_sas_addr, phy->attached_sas_addr,
}
sas_port_add_phy(port->port, phy->phy);
+ SAS_DPRINTK("%s added to %s, phy_mask:0x%x (%16llx)\n",
+ phy->phy->dev.bus_id,port->port->dev.bus_id,
+ port->phy_mask,
+ SAS_ADDR(port->attached_sas_addr));
+
if (port->port_dev)
port->port_dev->pathways = port->num_phys;
static void sas_init_port(struct asd_sas_port *port,
struct sas_ha_struct *sas_ha, int i)
{
+ memset(port, 0, sizeof(*port));
port->id = i;
INIT_LIST_HEAD(&port->dev_list);
spin_lock_init(&port->phy_list_lock);
INIT_LIST_HEAD(&port->phy_list);
- port->num_phys = 0;
- port->phy_mask = 0;
port->ha = sas_ha;
spin_lock_init(&port->dev_list_lock);
}
/* Find the sas_phy that's attached to this device */
-static struct sas_phy *find_local_sas_phy(struct domain_device *dev)
+struct sas_phy *sas_find_local_phy(struct domain_device *dev)
{
struct domain_device *pdev = dev->parent;
struct ex_phy *exphy = NULL;
BUG_ON(!exphy);
return exphy->phy;
}
+EXPORT_SYMBOL_GPL(sas_find_local_phy);
/* Attempt to send a LUN reset message to a device */
int sas_eh_device_reset_handler(struct scsi_cmnd *cmd)
int sas_eh_bus_reset_handler(struct scsi_cmnd *cmd)
{
struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_phy *phy = find_local_sas_phy(dev);
+ struct sas_phy *phy = sas_find_local_phy(dev);
int res;
res = sas_phy_reset(phy, 1);
}
/* Try to reset a device */
-static int try_to_reset_cmd_device(struct Scsi_Host *shost,
- struct scsi_cmnd *cmd)
+static int try_to_reset_cmd_device(struct scsi_cmnd *cmd)
{
int res;
+ struct Scsi_Host *shost = cmd->device->host;
if (!shost->hostt->eh_device_reset_handler)
goto try_bus_reset;
need_reset = task->task_state_flags & SAS_TASK_NEED_DEV_RESET;
spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (need_reset) {
+ SAS_DPRINTK("%s: task 0x%p requests reset\n",
+ __FUNCTION__, task);
+ goto reset;
+ }
+
SAS_DPRINTK("trying to find task 0x%p\n", task);
res = sas_scsi_find_task(task);
SAS_DPRINTK("%s: task 0x%p is done\n", __FUNCTION__,
task);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_ABORTED:
SAS_DPRINTK("%s: task 0x%p is aborted\n",
__FUNCTION__, task);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
continue;
case TASK_IS_AT_LU:
SAS_DPRINTK("task 0x%p is at LU: lu recover\n", task);
+ reset:
tmf_resp = sas_recover_lu(task->dev, cmd);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
SAS_DPRINTK("dev %016llx LU %x is "
SAS_ADDR(task->dev),
cmd->device->lun);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
sas_scsi_clear_queue_lu(work_q, cmd);
goto Again;
}
task);
tmf_resp = sas_recover_I_T(task->dev);
if (tmf_resp == TMF_RESP_FUNC_COMPLETE) {
+ struct domain_device *dev = task->dev;
SAS_DPRINTK("I_T %016llx recovered\n",
SAS_ADDR(task->dev->sas_addr));
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
- sas_scsi_clear_queue_I_T(work_q, task->dev);
+ sas_scsi_clear_queue_I_T(work_q, dev);
goto Again;
}
/* Hammer time :-) */
+ try_to_reset_cmd_device(cmd);
if (i->dft->lldd_clear_nexus_port) {
struct asd_sas_port *port = task->dev->port;
SAS_DPRINTK("clearing nexus for port:%d\n",
SAS_DPRINTK("clear nexus port:%d "
"succeeded\n", port->id);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
sas_scsi_clear_queue_port(work_q,
port);
goto Again;
SAS_DPRINTK("clear nexus ha "
"succeeded\n");
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
goto clear_q;
}
}
cmd->device->lun);
sas_eh_finish_cmd(cmd);
- if (need_reset)
- try_to_reset_cmd_device(shost, cmd);
goto clear_q;
}
}
#include <asm/io.h>
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.5.1"
#define _MV_DUMP 0
#define MVS_DISABLE_NVRAM
#define MVS_DISABLE_MSI
return rc;
#else
/* FIXME , For SAS target mode */
- memcpy(buf, "\x00\x00\xab\x11\x30\x04\x05\x50", 8);
+ memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
return 0;
#endif
}
mvs_hba_cq_dump(mvi);
- if (unlikely(rx_desc & RXQ_DONE))
+ if (likely(rx_desc & RXQ_DONE))
mvs_slot_complete(mvi, rx_desc);
if (rx_desc & RXQ_ATTN) {
attn = true;
msleep(100);
/* init and reset phys */
for (i = 0; i < mvi->chip->n_phy; i++) {
- /* FIXME: is this the correct dword order? */
- u32 lo = *((u32 *)&mvi->sas_addr[0]);
- u32 hi = *((u32 *)&mvi->sas_addr[4]);
+ u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
+ u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
mvs_detect_porttype(mvi, i);
}
req_len += sgpnt->length;
}
- scsi_set_resid(cmd, req_len - act_len);
+ scsi_set_resid(cmd, buflen - act_len);
return 0;
}
.cmd_per_lun = 1,
.emulated = 1, /* only sg driver uses this */
.max_sectors = PS3ROM_MAX_SECTORS,
- .use_clustering = ENABLE_CLUSTERING,
+ .use_clustering = DISABLE_CLUSTERING,
.module = THIS_MODULE,
};
ms_pkt->entry_count = 1;
SET_TARGET_ID(ha, ms_pkt->loop_id, SIMPLE_NAME_SERVER);
ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG);
- ms_pkt->timeout = __constant_cpu_to_le16(25);
+ ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ms_pkt->total_dsd_count = __constant_cpu_to_le16(2);
ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = __constant_cpu_to_le16(NPH_SNS);
- ct_pkt->timeout = __constant_cpu_to_le16(25);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ms_pkt->entry_count = 1;
SET_TARGET_ID(ha, ms_pkt->loop_id, ha->mgmt_svr_loop_id);
ms_pkt->control_flags = __constant_cpu_to_le16(CF_READ | CF_HEAD_TAG);
- ms_pkt->timeout = __constant_cpu_to_le16(59);
+ ms_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ms_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ms_pkt->total_dsd_count = __constant_cpu_to_le16(2);
ms_pkt->rsp_bytecount = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
- ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ct_pkt->entry_type = CT_IOCB_TYPE;
ct_pkt->entry_count = 1;
ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
- ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
ha->login_timeout = nv->login_timeout;
icb->login_timeout = nv->login_timeout;
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
ha->login_timeout = le16_to_cpu(nv->login_timeout);
icb->login_timeout = cpu_to_le16(nv->login_timeout);
- /* Set minimum RATOV to 200 tenths of a second. */
- ha->r_a_tov = 200;
+ /* Set minimum RATOV to 100 tenths of a second. */
+ ha->r_a_tov = 100;
ha->loop_reset_delay = nv->reset_delay;
return;
ret = qla2x00_stop_firmware(ha);
- for (retries = 5; ret != QLA_SUCCESS && retries ; retries--) {
+ for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
+ retries ; retries--) {
qla2x00_reset_chip(ha);
if (qla2x00_chip_diag(ha) != QLA_SUCCESS)
continue;
}
}
+ /* Check for overrun. */
+ if (IS_FWI2_CAPABLE(ha) && comp_status == CS_COMPLETE &&
+ scsi_status & SS_RESIDUAL_OVER)
+ comp_status = CS_DATA_OVERRUN;
+
/*
* Based on Host and scsi status generate status code for Linux
*/
tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
tsk->p.tsk.entry_count = 1;
tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
- tsk->p.tsk.timeout = __constant_cpu_to_le16(25);
+ tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
tsk->p.tsk.control_flags = __constant_cpu_to_le32(TCF_TARGET_RESET);
tsk->p.tsk.port_id[0] = fcport->d_id.b.al_pa;
tsk->p.tsk.port_id[1] = fcport->d_id.b.area;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.00-k8"
+#define QLA2XXX_VERSION "8.02.00-k9"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
ddb_entry->fw_ddb_device_state = state;
/* Device is back online. */
if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
+ atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
atomic_set(&ddb_entry->port_down_timer,
ha->port_down_retry_count);
- atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
atomic_set(&ddb_entry->relogin_retry_count, 0);
atomic_set(&ddb_entry->relogin_timer, 0);
clear_bit(DF_RELOGIN, &ddb_entry->flags);
static int qla4xxx_slave_alloc(struct scsi_device *device);
static int qla4xxx_slave_configure(struct scsi_device *device);
static void qla4xxx_slave_destroy(struct scsi_device *sdev);
+static void qla4xxx_scan_start(struct Scsi_Host *shost);
static struct scsi_host_template qla4xxx_driver_template = {
.module = THIS_MODULE,
.slave_destroy = qla4xxx_slave_destroy,
.scan_finished = iscsi_scan_finished,
+ .scan_start = qla4xxx_scan_start,
.this_id = -1,
.cmd_per_lun = 3,
return ddb_entry;
}
+static void qla4xxx_scan_start(struct Scsi_Host *shost)
+{
+ struct scsi_qla_host *ha = shost_priv(shost);
+ struct ddb_entry *ddb_entry, *ddbtemp;
+
+ /* finish setup of sessions that were already setup in firmware */
+ list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
+ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
+ qla4xxx_add_sess(ddb_entry);
+ }
+}
+
/*
* Timer routines
*/
* qla4xxx_recover_adapter - recovers adapter after a fatal error
* @ha: Pointer to host adapter structure.
* @renew_ddb_list: Indicates what to do with the adapter's ddb list
- * after adapter recovery has completed.
- * 0=preserve ddb list, 1=destroy and rebuild ddb list
+ *
+ * renew_ddb_list value can be 0=preserve ddb list, 1=destroy and rebuild
+ * ddb list.
**/
static int qla4xxx_recover_adapter(struct scsi_qla_host *ha,
uint8_t renew_ddb_list)
/* Stall incoming I/O until we are done */
clear_bit(AF_ONLINE, &ha->flags);
+
DEBUG2(printk("scsi%ld: %s calling qla4xxx_cmd_wait\n", ha->host_no,
__func__));
int ret = -ENODEV, status;
struct Scsi_Host *host;
struct scsi_qla_host *ha;
- struct ddb_entry *ddb_entry, *ddbtemp;
uint8_t init_retry_count = 0;
char buf[34];
if (ret)
goto probe_failed;
- /* Update transport device information for all devices. */
- list_for_each_entry_safe(ddb_entry, ddbtemp, &ha->ddb_list, list) {
- if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE)
- if (qla4xxx_add_sess(ddb_entry))
- goto remove_host;
- }
-
printk(KERN_INFO
" QLogic iSCSI HBA Driver version: %s\n"
" QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
scsi_scan_host(host);
return 0;
-remove_host:
- qla4xxx_free_ddb_list(ha);
- scsi_remove_host(host);
-
probe_failed:
qla4xxx_free_adapter(ha);
scsi_host_put(ha->host);
return FAILED;
}
- if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS) {
+ /* make sure the dpc thread is stopped while we reset the hba */
+ clear_bit(AF_ONLINE, &ha->flags);
+ flush_workqueue(ha->dpc_thread);
+
+ if (qla4xxx_recover_adapter(ha, PRESERVE_DDB_LIST) == QLA_SUCCESS)
return_status = SUCCESS;
- }
dev_info(&ha->pdev->dev, "HOST RESET %s.\n",
return_status == FAILED ? "FAILED" : "SUCCEDED");
if (!cmd)
goto release_rq;
- memset(cmd, 0, sizeof(*cmd));
cmd->sc_data_direction = data_dir;
cmd->jiffies_at_alloc = jiffies;
cmd->request = rq;
scsi_release_buffers(cmd);
goto unmap_rq;
}
+ /*
+ * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the
+ * length for us.
+ */
+ cmd->sdb.length = rq->data_len;
return 0;
#define ISCSI_SESSION_ATTRS 19
#define ISCSI_CONN_ATTRS 13
#define ISCSI_HOST_ATTRS 4
-#define ISCSI_TRANSPORT_VERSION "2.0-868"
+#define ISCSI_TRANSPORT_VERSION "2.0-869"
struct iscsi_internal {
int daemon_pid;
scsi_target_unblock(&session->dev);
}
-static void __iscsi_unblock_session(struct iscsi_cls_session *session)
-{
- if (!cancel_delayed_work(&session->recovery_work))
- flush_workqueue(iscsi_eh_timer_workq);
- scsi_target_unblock(&session->dev);
-}
-
-void iscsi_unblock_session(struct iscsi_cls_session *session)
+static void __iscsi_unblock_session(struct work_struct *work)
{
+ struct iscsi_cls_session *session =
+ container_of(work, struct iscsi_cls_session,
+ unblock_work);
struct Scsi_Host *shost = iscsi_session_to_shost(session);
struct iscsi_host *ihost = shost->shost_data;
unsigned long flags;
+ /*
+ * The recovery and unblock work get run from the same workqueue,
+ * so try to cancel it if it was going to run after this unblock.
+ */
+ cancel_delayed_work(&session->recovery_work);
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_LOGGED_IN;
spin_unlock_irqrestore(&session->lock, flags);
-
- __iscsi_unblock_session(session);
+ /* start IO */
+ scsi_target_unblock(&session->dev);
/*
* Only do kernel scanning if the driver is properly hooked into
* the async scanning code (drivers like iscsi_tcp do login and
atomic_inc(&ihost->nr_scans);
}
}
+
+/**
+ * iscsi_unblock_session - set a session as logged in and start IO.
+ * @session: iscsi session
+ *
+ * Mark a session as ready to accept IO.
+ */
+void iscsi_unblock_session(struct iscsi_cls_session *session)
+{
+ queue_work(iscsi_eh_timer_workq, &session->unblock_work);
+ /*
+ * make sure all the events have completed before tell the driver
+ * it is safe
+ */
+ flush_workqueue(iscsi_eh_timer_workq);
+}
EXPORT_SYMBOL_GPL(iscsi_unblock_session);
-void iscsi_block_session(struct iscsi_cls_session *session)
+static void __iscsi_block_session(struct work_struct *work)
{
+ struct iscsi_cls_session *session =
+ container_of(work, struct iscsi_cls_session,
+ block_work);
unsigned long flags;
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_FAILED;
spin_unlock_irqrestore(&session->lock, flags);
-
scsi_target_block(&session->dev);
queue_delayed_work(iscsi_eh_timer_workq, &session->recovery_work,
session->recovery_tmo * HZ);
}
+
+void iscsi_block_session(struct iscsi_cls_session *session)
+{
+ queue_work(iscsi_eh_timer_workq, &session->block_work);
+}
EXPORT_SYMBOL_GPL(iscsi_block_session);
static void __iscsi_unbind_session(struct work_struct *work)
INIT_DELAYED_WORK(&session->recovery_work, session_recovery_timedout);
INIT_LIST_HEAD(&session->host_list);
INIT_LIST_HEAD(&session->sess_list);
+ INIT_WORK(&session->unblock_work, __iscsi_unblock_session);
+ INIT_WORK(&session->block_work, __iscsi_block_session);
INIT_WORK(&session->unbind_work, __iscsi_unbind_session);
INIT_WORK(&session->scan_work, iscsi_scan_session);
spin_lock_init(&session->lock);
list_del(&session->sess_list);
spin_unlock_irqrestore(&sesslock, flags);
+ /* make sure there are no blocks/unblocks queued */
+ flush_workqueue(iscsi_eh_timer_workq);
+ /* make sure the timedout callout is not running */
+ if (!cancel_delayed_work(&session->recovery_work))
+ flush_workqueue(iscsi_eh_timer_workq);
/*
* If we are blocked let commands flow again. The lld or iscsi
* layer should set up the queuecommand to fail commands.
+ * We assume that LLD will not be calling block/unblock while
+ * removing the session.
*/
spin_lock_irqsave(&session->lock, flags);
session->state = ISCSI_SESSION_FREE;
spin_unlock_irqrestore(&session->lock, flags);
- __iscsi_unblock_session(session);
- __iscsi_unbind_session(&session->unbind_work);
- /* flush running scans */
+ scsi_target_unblock(&session->dev);
+ /* flush running scans then delete devices */
flush_workqueue(ihost->scan_workq);
- /*
- * If the session dropped while removing devices then we need to make
- * sure it is not blocked
- */
- if (!cancel_delayed_work(&session->recovery_work))
- flush_workqueue(iscsi_eh_timer_workq);
+ __iscsi_unbind_session(&session->unbind_work);
/* hw iscsi may not have removed all connections from session */
err = device_for_each_child(&session->dev, NULL,
void iscsi_conn_error(struct iscsi_cls_conn *conn, enum iscsi_err error)
{
- struct iscsi_cls_session *session = iscsi_conn_to_session(conn);
struct nlmsghdr *nlh;
struct sk_buff *skb;
struct iscsi_uevent *ev;
struct iscsi_internal *priv;
int len = NLMSG_SPACE(sizeof(*ev));
- unsigned long flags;
priv = iscsi_if_transport_lookup(conn->transport);
if (!priv)
return;
- spin_lock_irqsave(&session->lock, flags);
- if (session->state == ISCSI_SESSION_LOGGED_IN)
- session->state = ISCSI_SESSION_FAILED;
- spin_unlock_irqrestore(&session->lock, flags);
-
skb = alloc_skb(len, GFP_ATOMIC);
if (!skb) {
iscsi_cls_conn_printk(KERN_ERR, conn, "gracefully ignored "
{ /* end of list */ },
};
-static struct of_platform_driver __devinitdata of_platform_serial_driver = {
+static struct of_platform_driver of_platform_serial_driver = {
.owner = THIS_MODULE,
.name = "of_serial",
.probe = of_platform_serial_probe,
config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
- depends on MPC834x || PPC_MPC831x
+ depends on FSL_SOC
select USB_GADGET_DUALSPEED
help
Some of Freescale PowerPC processors have a High Speed
{
struct ehci_hcd *ehci = (struct ehci_hcd *) param;
unsigned long flags;
- u32 status, cmd;
spin_lock_irqsave (&ehci->lock, flags);
- WARN_ON(!ehci->reclaim);
- status = ehci_readl(ehci, &ehci->regs->status);
- cmd = ehci_readl(ehci, &ehci->regs->command);
- ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd);
-
- /* lost IAA irqs wedge things badly; seen first with a vt8235 */
- if (ehci->reclaim) {
- if (status & STS_IAA) {
- ehci_vdbg (ehci, "lost IAA\n");
+ /* Lost IAA irqs wedge things badly; seen first with a vt8235.
+ * So we need this watchdog, but must protect it against both
+ * (a) SMP races against real IAA firing and retriggering, and
+ * (b) clean HC shutdown, when IAA watchdog was pending.
+ */
+ if (ehci->reclaim
+ && !timer_pending(&ehci->iaa_watchdog)
+ && HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) {
+ u32 cmd, status;
+
+ /* If we get here, IAA is *REALLY* late. It's barely
+ * conceivable that the system is so busy that CMD_IAAD
+ * is still legitimately set, so let's be sure it's
+ * clear before we read STS_IAA. (The HC should clear
+ * CMD_IAAD when it sets STS_IAA.)
+ */
+ cmd = ehci_readl(ehci, &ehci->regs->command);
+ if (cmd & CMD_IAAD)
+ ehci_writel(ehci, cmd & ~CMD_IAAD,
+ &ehci->regs->command);
+
+ /* If IAA is set here it either legitimately triggered
+ * before we cleared IAAD above (but _way_ late, so we'll
+ * still count it as lost) ... or a silicon erratum:
+ * - VIA seems to set IAA without triggering the IRQ;
+ * - IAAD potentially cleared without setting IAA.
+ */
+ status = ehci_readl(ehci, &ehci->regs->status);
+ if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
COUNT (ehci->stats.lost_iaa);
ehci_writel(ehci, STS_IAA, &ehci->regs->status);
}
- ehci_writel(ehci, cmd & ~CMD_IAAD, &ehci->regs->command);
+
+ ehci_vdbg(ehci, "IAA watchdog: status %x cmd %x\n",
+ status, cmd);
end_unlink_async(ehci);
}
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 status, pcd_status = 0;
+ u32 status, pcd_status = 0, cmd;
int bh;
spin_lock (&ehci->lock);
/* clear (just) interrupts */
ehci_writel(ehci, status, &ehci->regs->status);
- ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
+ cmd = ehci_readl(ehci, &ehci->regs->command);
bh = 0;
#ifdef EHCI_VERBOSE_DEBUG
/* complete the unlinking of some qh [4.15.2.3] */
if (status & STS_IAA) {
- COUNT (ehci->stats.reclaim);
- end_unlink_async(ehci);
+ /* guard against (alleged) silicon errata */
+ if (cmd & CMD_IAAD) {
+ ehci_writel(ehci, cmd & ~CMD_IAAD,
+ &ehci->regs->command);
+ ehci_dbg(ehci, "IAA with IAAD still set?\n");
+ }
+ if (ehci->reclaim) {
+ COUNT(ehci->stats.reclaim);
+ end_unlink_async(ehci);
+ } else
+ ehci_dbg(ehci, "IAA with nothing to reclaim?\n");
}
/* remote wakeup [4.3.1] */
static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
/* failfast */
- if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))
+ if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state) && ehci->reclaim)
end_unlink_async(ehci);
/* if it's not linked then there's nothing to do */
static struct usb_device_id id_table_cyphidcomrs232 [] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+ { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
{ } /* Terminating entry */
};
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
+ { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* Powercom UPS, chip CY7C63723 */
+#define VENDOR_ID_POWERCOM 0x0d9f
+#define PRODUCT_ID_UPS 0x0002
+
/* Nokia CA-42 USB to serial cable */
#define VENDOR_ID_DAZZLE 0x07d0
#define PRODUCT_ID_CA42 0x4101
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
#define TML_VID 0x1B91 /* Vendor ID */
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
+/* Propox devices */
+#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
+
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
room = tty_buffer_request_room(tty, urb->actual_length);
if (room) {
tty_insert_flip_string(tty, urb->transfer_buffer, room);
- tty_flip_buffer_push(tty); /* is this allowed from an URB callback ? */
+ tty_flip_buffer_push(tty);
}
}
/* Throttle the device if requested by tty */
spin_lock_irqsave(&port->lock, flags);
- if (!(port->throttled = port->throttle_req))
- /* Handle data and continue reading from device */
+ if (!(port->throttled = port->throttle_req)) {
+ spin_unlock_irqrestore(&port->lock, flags);
flush_and_resubmit_read_urb(port);
- spin_unlock_irqrestore(&port->lock, flags);
+ } else {
+ spin_unlock_irqrestore(&port->lock, flags);
+ }
}
EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
#define HUAWEI_PRODUCT_E220BIS 0x1004
#define NOVATELWIRELESS_VENDOR_ID 0x1410
+
+/* MERLIN EVDO PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_V640 0x1100
+#define NOVATELWIRELESS_PRODUCT_V620 0x1110
+#define NOVATELWIRELESS_PRODUCT_V740 0x1120
+#define NOVATELWIRELESS_PRODUCT_V720 0x1130
+
+/* MERLIN HSDPA/HSPA PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_U730 0x1400
+#define NOVATELWIRELESS_PRODUCT_U740 0x1410
+#define NOVATELWIRELESS_PRODUCT_U870 0x1420
+#define NOVATELWIRELESS_PRODUCT_XU870 0x1430
+#define NOVATELWIRELESS_PRODUCT_X950D 0x1450
+
+/* EXPEDITE PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_EV620 0x2100
+#define NOVATELWIRELESS_PRODUCT_ES720 0x2110
+#define NOVATELWIRELESS_PRODUCT_E725 0x2120
+#define NOVATELWIRELESS_PRODUCT_EU730 0x2400
+#define NOVATELWIRELESS_PRODUCT_EU740 0x2410
+#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420
+
+/* OVATION PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
+#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
+
+/* FUTURE NOVATEL PRODUCTS */
+#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000
+#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000
+#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000
+#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000
+#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001
+#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001
+#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001
+#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001
+
#define DELL_VENDOR_ID 0x413C
#define KYOCERA_VENDOR_ID 0x0c88
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1100) }, /* Novatel Merlin XS620/S640 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1110) }, /* Novatel Merlin S620 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1120) }, /* Novatel Merlin EX720 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1130) }, /* Novatel Merlin S720 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1400) }, /* Novatel U730 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1410) }, /* Novatel U740 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1420) }, /* Novatel EU870 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2100) }, /* Novatel EV620 CDMA/EV-DO */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, /* Novatel Merlin V720/S720/PC720 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, /* Novatel U730/U740 (VF version) */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, /* Novatel U740 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, /* Novatel U870 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, /* Novatel Merlin XU870 HSDPA/3G */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, /* Novatel X950D */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x5010) }, /* Novatel U727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */
+
{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
static unsigned long sddr55_get_capacity(struct us_data *us) {
- unsigned char manufacturerID;
- unsigned char deviceID;
+ unsigned char uninitialized_var(manufacturerID);
+ unsigned char uninitialized_var(deviceID);
int result;
struct sddr55_card_info *info = (struct sddr55_card_info *)us->extra;
help
This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
obj-$(CONFIG_FB_VGA16) += vga16fb.o
obj-$(CONFIG_FB_OF) += offb.o
obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o
# the test framebuffer is last
obj-$(CONFIG_FB_VIRTUAL) += vfb.o
*
*
* Modified:
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2007-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
u16 eppi_req_18[] = EPPI0_18;
u16 disp = fbi->mach_info->disp;
- if (gpio_request(disp, NULL)) {
+ if (gpio_request(disp, DRIVER_NAME)) {
printk(KERN_ERR "Requesting GPIO %d faild\n", disp);
return -EFAULT;
}
&bfin_lq043fb_bl_ops);
bl_dev->props.max_brightness = 255;
- lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
+ lcd_dev = lcd_device_register(DRIVER_NAME, &pdev->dev, NULL, &bfin_lcd_ops);
lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
#endif
--- /dev/null
+/*
+ * File: drivers/video/bfin-t350mcqb-fb.c
+ * Based on:
+ * Author: Michael Hennerich <hennerich@blackfin.uclinux.org>
+ *
+ * Created:
+ * Description: Blackfin LCD Framebufer driver
+ *
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dma-mapping.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+#include <asm/gptimers.h>
+
+#define NO_BL_SUPPORT
+
+#define LCD_X_RES 320 /* Horizontal Resolution */
+#define LCD_Y_RES 240 /* Vertical Resolution */
+#define LCD_BPP 24 /* Bit Per Pixel */
+
+#define DMA_BUS_SIZE 16
+#define LCD_CLK (12*1000*1000) /* 12MHz */
+
+#define CLOCKS_PER_PIX 3
+
+ /*
+ * HS and VS timing parameters (all in number of PPI clk ticks)
+ */
+
+#define U_LINE 1 /* Blanking Lines */
+
+#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
+#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */
+#define H_PULSE 90 /* HS pulse width */
+#define H_START 204 /* first valid pixel */
+
+#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
+#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
+#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
+
+#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
+
+#define BFIN_LCD_NBR_PALETTE_ENTRIES 256
+
+#define DRIVER_NAME "bfin-t350mcqb"
+static char driver_name[] = DRIVER_NAME;
+
+struct bfin_t350mcqbfb_info {
+ struct fb_info *fb;
+ struct device *dev;
+ unsigned char *fb_buffer; /* RGB Buffer */
+ dma_addr_t dma_handle;
+ int lq043_mmap;
+ int lq043_open_cnt;
+ int irq;
+ spinlock_t lock; /* lock */
+};
+
+static int nocursor;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
+#define PPI_TX_MODE 0x2
+#define PPI_XFER_TYPE_11 0xC
+#define PPI_PORT_CFG_01 0x10
+#define PPI_PACK_EN 0x80
+#define PPI_POLS_1 0x8000
+
+static void bfin_t350mcqb_config_ppi(struct bfin_t350mcqbfb_info *fbi)
+{
+ bfin_write_PPI_DELAY(H_START);
+ bfin_write_PPI_COUNT(H_ACTPIX-1);
+ bfin_write_PPI_FRAME(V_LINES);
+
+ bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */
+ PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
+ PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
+ PPI_PACK_EN | /* packing enabled PACK_EN */
+ PPI_POLS_1); /* faling edge syncs POLS */
+}
+
+static inline void bfin_t350mcqb_disable_ppi(void)
+{
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
+}
+
+static inline void bfin_t350mcqb_enable_ppi(void)
+{
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+}
+
+static void bfin_t350mcqb_start_timers(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ enable_gptimers(TIMER1bit);
+ enable_gptimers(TIMER0bit);
+ local_irq_restore(flags);
+}
+
+static void bfin_t350mcqb_stop_timers(void)
+{
+ disable_gptimers(TIMER0bit | TIMER1bit);
+
+ set_gptimer_status(0, TIMER_STATUS_TRUN0 | TIMER_STATUS_TRUN1 |
+ TIMER_STATUS_TIMIL0 | TIMER_STATUS_TIMIL1 |
+ TIMER_STATUS_TOVF0 | TIMER_STATUS_TOVF1);
+
+}
+
+static void bfin_t350mcqb_init_timers(void)
+{
+
+ bfin_t350mcqb_stop_timers();
+
+ set_gptimer_period(TIMER0_id, H_PERIOD);
+ set_gptimer_pwidth(TIMER0_id, H_PULSE);
+ set_gptimer_config(TIMER0_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+ TIMER_TIN_SEL | TIMER_CLK_SEL|
+ TIMER_EMU_RUN);
+
+ set_gptimer_period(TIMER1_id, V_PERIOD);
+ set_gptimer_pwidth(TIMER1_id, V_PULSE);
+ set_gptimer_config(TIMER1_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT |
+ TIMER_TIN_SEL | TIMER_CLK_SEL |
+ TIMER_EMU_RUN);
+
+}
+
+static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi)
+{
+
+ set_dma_config(CH_PPI,
+ set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO,
+ INTR_DISABLE, DIMENSION_2D,
+ DATA_SIZE_16,
+ DMA_NOSYNC_KEEP_DMA_BUF));
+ set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
+ set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8);
+ set_dma_y_count(CH_PPI, V_LINES);
+
+ set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8);
+ set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer);
+
+}
+
+static int bfin_t350mcqb_request_ports(int action)
+{
+ u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+ P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
+ P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
+ P_PPI0_D6, P_PPI0_D7, 0};
+
+ if (action) {
+ if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
+ printk(KERN_ERR "Requesting Peripherals faild\n");
+ return -EFAULT;
+ }
+ } else
+ peripheral_free_list(ppi0_req_8);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_open(struct fb_info *info, int user)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ spin_lock(&fbi->lock);
+ fbi->lq043_open_cnt++;
+
+ if (fbi->lq043_open_cnt <= 1) {
+
+ bfin_t350mcqb_disable_ppi();
+ SSYNC();
+
+ bfin_t350mcqb_config_dma(fbi);
+ bfin_t350mcqb_config_ppi(fbi);
+ bfin_t350mcqb_init_timers();
+
+ /* start dma */
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+ bfin_t350mcqb_start_timers();
+ }
+
+ spin_unlock(&fbi->lock);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_release(struct fb_info *info, int user)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ spin_lock(&fbi->lock);
+
+ fbi->lq043_open_cnt--;
+ fbi->lq043_mmap = 0;
+
+ if (fbi->lq043_open_cnt <= 0) {
+ bfin_t350mcqb_disable_ppi();
+ SSYNC();
+ disable_dma(CH_PPI);
+ bfin_t350mcqb_stop_timers();
+ memset(fbi->fb_buffer, 0, info->fix.smem_len);
+ }
+
+ spin_unlock(&fbi->lock);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+
+ if (var->bits_per_pixel != LCD_BPP) {
+ pr_debug("%s: depth not supported: %u BPP\n", __FUNCTION__,
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ if (info->var.xres != var->xres || info->var.yres != var->yres ||
+ info->var.xres_virtual != var->xres_virtual ||
+ info->var.yres_virtual != var->yres_virtual) {
+ pr_debug("%s: Resolution not supported: X%u x Y%u \n",
+ __FUNCTION__, var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ /*
+ * Memory limit
+ */
+
+ if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+ pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+ __FUNCTION__, var->yres_virtual);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int bfin_t350mcqb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+ struct bfin_t350mcqbfb_info *fbi = info->par;
+
+ if (fbi->lq043_mmap)
+ return -1;
+
+ spin_lock(&fbi->lock);
+ fbi->lq043_mmap = 1;
+ spin_unlock(&fbi->lock);
+
+ vma->vm_start = (unsigned long)(fbi->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET);
+
+ vma->vm_end = vma->vm_start + info->fix.smem_len;
+ /* For those who don't understand how mmap works, go read
+ * Documentation/nommu-mmap.txt.
+ * For those that do, you will know that the VM_MAYSHARE flag
+ * must be set in the vma->vm_flags structure on noMMU
+ * Other flags can be set, and are documented in
+ * include/linux/mm.h
+ */
+ vma->vm_flags |= VM_MAYSHARE;
+
+ return 0;
+}
+
+int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ if (nocursor)
+ return 0;
+ else
+ return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static int bfin_t350mcqb_fb_setcolreg(u_int regno, u_int red, u_int green,
+ u_int blue, u_int transp,
+ struct fb_info *info)
+{
+ if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
+ return -EINVAL;
+
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+
+ u32 value;
+ /* Place color in the pseudopalette */
+ if (regno > 16)
+ return -EINVAL;
+
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ value &= 0xFFFFFF;
+
+ ((u32 *) (info->pseudo_palette))[regno] = value;
+
+ }
+
+ return 0;
+}
+
+static struct fb_ops bfin_t350mcqb_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = bfin_t350mcqb_fb_open,
+ .fb_release = bfin_t350mcqb_fb_release,
+ .fb_check_var = bfin_t350mcqb_fb_check_var,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = bfin_t350mcqb_fb_mmap,
+ .fb_cursor = bfin_t350mcqb_fb_cursor,
+ .fb_setcolreg = bfin_t350mcqb_fb_setcolreg,
+};
+
+#ifndef NO_BL_SUPPORT
+static int bl_get_brightness(struct backlight_device *bd)
+{
+ return 0;
+}
+
+static struct backlight_ops bfin_lq043fb_bl_ops = {
+ .get_brightness = bl_get_brightness,
+};
+
+static struct backlight_device *bl_dev;
+
+static int bfin_lcd_get_power(struct lcd_device *dev)
+{
+ return 0;
+}
+
+static int bfin_lcd_set_power(struct lcd_device *dev, int power)
+{
+ return 0;
+}
+
+static int bfin_lcd_get_contrast(struct lcd_device *dev)
+{
+ return 0;
+}
+
+static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
+{
+
+ return 0;
+}
+
+static int bfin_lcd_check_fb(struct fb_info *fi)
+{
+ if (!fi || (fi == &bfin_t350mcqb_fb))
+ return 1;
+ return 0;
+}
+
+static struct lcd_ops bfin_lcd_ops = {
+ .get_power = bfin_lcd_get_power,
+ .set_power = bfin_lcd_set_power,
+ .get_contrast = bfin_lcd_get_contrast,
+ .set_contrast = bfin_lcd_set_contrast,
+ .check_fb = bfin_lcd_check_fb,
+};
+
+static struct lcd_device *lcd_dev;
+#endif
+
+static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id)
+{
+ /*struct bfin_t350mcqbfb_info *info = (struct bfin_t350mcqbfb_info *)dev_id;*/
+
+ u16 status = bfin_read_PPI_STATUS();
+ bfin_write_PPI_STATUS(0xFFFF);
+
+ if (status) {
+ bfin_t350mcqb_disable_ppi();
+ disable_dma(CH_PPI);
+
+ /* start dma */
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+ bfin_write_PPI_STATUS(0xFFFF);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init bfin_t350mcqb_probe(struct platform_device *pdev)
+{
+ struct bfin_t350mcqbfb_info *info;
+ struct fb_info *fbinfo;
+ int ret;
+
+ printk(KERN_INFO DRIVER_NAME ": %dx%d %d-bit RGB FrameBuffer initializing...\n",
+ LCD_X_RES, LCD_Y_RES, LCD_BPP);
+
+ if (request_dma(CH_PPI, "CH_PPI") < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": couldn't request CH_PPI DMA\n");
+ ret = -EFAULT;
+ goto out1;
+ }
+
+ fbinfo =
+ framebuffer_alloc(sizeof(struct bfin_t350mcqbfb_info), &pdev->dev);
+ if (!fbinfo) {
+ ret = -ENOMEM;
+ goto out2;
+ }
+
+ info = fbinfo->par;
+ info->fb = fbinfo;
+ info->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, fbinfo);
+
+ strcpy(fbinfo->fix.id, driver_name);
+
+ fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbinfo->fix.type_aux = 0;
+ fbinfo->fix.xpanstep = 0;
+ fbinfo->fix.ypanstep = 0;
+ fbinfo->fix.ywrapstep = 0;
+ fbinfo->fix.accel = FB_ACCEL_NONE;
+ fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+
+ fbinfo->var.nonstd = 0;
+ fbinfo->var.activate = FB_ACTIVATE_NOW;
+ fbinfo->var.height = -1;
+ fbinfo->var.width = -1;
+ fbinfo->var.accel_flags = 0;
+ fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+ fbinfo->var.xres = LCD_X_RES;
+ fbinfo->var.xres_virtual = LCD_X_RES;
+ fbinfo->var.yres = LCD_Y_RES;
+ fbinfo->var.yres_virtual = LCD_Y_RES;
+ fbinfo->var.bits_per_pixel = LCD_BPP;
+
+ fbinfo->var.red.offset = 0;
+ fbinfo->var.green.offset = 8;
+ fbinfo->var.blue.offset = 16;
+ fbinfo->var.transp.offset = 0;
+ fbinfo->var.red.length = 8;
+ fbinfo->var.green.length = 8;
+ fbinfo->var.blue.length = 8;
+ fbinfo->var.transp.length = 0;
+ fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8;
+
+ fbinfo->fix.line_length = fbinfo->var.xres_virtual *
+ fbinfo->var.bits_per_pixel / 8;
+
+
+ fbinfo->fbops = &bfin_t350mcqb_fb_ops;
+ fbinfo->flags = FBINFO_FLAG_DEFAULT;
+
+ info->fb_buffer =
+ dma_alloc_coherent(NULL, fbinfo->fix.smem_len, &info->dma_handle,
+ GFP_KERNEL);
+
+ if (NULL == info->fb_buffer) {
+ printk(KERN_ERR DRIVER_NAME
+ ": couldn't allocate dma buffer.\n");
+ ret = -ENOMEM;
+ goto out3;
+ }
+
+ memset(info->fb_buffer, 0, fbinfo->fix.smem_len);
+
+ fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+ fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET;
+
+ fbinfo->fbops = &bfin_t350mcqb_fb_ops;
+
+ fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ if (!fbinfo->pseudo_palette) {
+ printk(KERN_ERR DRIVER_NAME
+ "Fail to allocate pseudo_palette\n");
+
+ ret = -ENOMEM;
+ goto out4;
+ }
+
+ memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
+
+ if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
+ < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ "Fail to allocate colormap (%d entries)\n",
+ BFIN_LCD_NBR_PALETTE_ENTRIES);
+ ret = -EFAULT;
+ goto out5;
+ }
+
+ if (bfin_t350mcqb_request_ports(1)) {
+ printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n");
+ ret = -EFAULT;
+ goto out6;
+ }
+
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ ret = -EINVAL;
+ goto out7;
+ }
+
+ if (request_irq(info->irq, (void *)bfin_t350mcqb_irq_error, IRQF_DISABLED,
+ "PPI ERROR", info) < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": unable to request PPI ERROR IRQ\n");
+ ret = -EFAULT;
+ goto out7;
+ }
+
+ if (register_framebuffer(fbinfo) < 0) {
+ printk(KERN_ERR DRIVER_NAME
+ ": unable to register framebuffer.\n");
+ ret = -EINVAL;
+ goto out8;
+ }
+#ifndef NO_BL_SUPPORT
+ bl_dev =
+ backlight_device_register("bf52x-bl", NULL, NULL,
+ &bfin_lq043fb_bl_ops);
+ bl_dev->props.max_brightness = 255;
+
+ lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops);
+ lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n");
+#endif
+
+ return 0;
+
+out8:
+ free_irq(info->irq, info);
+out7:
+ bfin_t350mcqb_request_ports(0);
+out6:
+ fb_dealloc_cmap(&fbinfo->cmap);
+out5:
+ kfree(fbinfo->pseudo_palette);
+out4:
+ dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+ info->dma_handle);
+out3:
+ framebuffer_release(fbinfo);
+out2:
+ free_dma(CH_PPI);
+out1:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int bfin_t350mcqb_remove(struct platform_device *pdev)
+{
+
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ free_dma(CH_PPI);
+ free_irq(info->irq, info);
+
+ if (info->fb_buffer != NULL)
+ dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
+ info->dma_handle);
+
+ kfree(fbinfo->pseudo_palette);
+ fb_dealloc_cmap(&fbinfo->cmap);
+
+#ifndef NO_BL_SUPPORT
+ lcd_device_unregister(lcd_dev);
+ backlight_device_unregister(bl_dev);
+#endif
+
+ unregister_framebuffer(fbinfo);
+
+ bfin_t350mcqb_request_ports(0);
+
+ printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ bfin_t350mcqb_disable_ppi();
+ disable_dma(CH_PPI);
+ bfin_write_PPI_STATUS(0xFFFF);
+
+ return 0;
+}
+
+static int bfin_t350mcqb_resume(struct platform_device *pdev)
+{
+ struct fb_info *fbinfo = platform_get_drvdata(pdev);
+ struct bfin_t350mcqbfb_info *info = fbinfo->par;
+
+ enable_dma(CH_PPI);
+ bfin_t350mcqb_enable_ppi();
+
+ return 0;
+}
+#else
+#define bfin_t350mcqb_suspend NULL
+#define bfin_t350mcqb_resume NULL
+#endif
+
+static struct platform_driver bfin_t350mcqb_driver = {
+ .probe = bfin_t350mcqb_probe,
+ .remove = bfin_t350mcqb_remove,
+ .suspend = bfin_t350mcqb_suspend,
+ .resume = bfin_t350mcqb_resume,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __devinit bfin_t350mcqb_driver_init(void)
+{
+ return platform_driver_register(&bfin_t350mcqb_driver);
+}
+
+static void __exit bfin_t350mcqb_driver_cleanup(void)
+{
+ platform_driver_unregister(&bfin_t350mcqb_driver);
+}
+
+MODULE_DESCRIPTION("Blackfin TFT LCD Driver");
+MODULE_LICENSE("GPL");
+
+module_init(bfin_t350mcqb_driver_init);
+module_exit(bfin_t350mcqb_driver_cleanup);
return 0;
}
-static int __devexit hitfb_remove(struct platform_device *dev)
+static int __exit hitfb_remove(struct platform_device *dev)
{
return unregister_framebuffer(&fb_info);
}
static struct platform_driver hitfb_driver = {
.probe = hitfb_probe,
- .remove = __devexit_p(hitfb_remove),
+ .remove = __exit_p(hitfb_remove),
#ifdef CONFIG_PM
.suspend = hitfb_suspend,
.resume = hitfb_resume,
struct mbxfb_info *mfbi;
struct mbxfb_platform_data *pdata;
- dev_dbg(dev, "mbxfb_probe\n");
+ dev_dbg(&dev->dev, "mbxfb_probe\n");
pdata = dev->dev.platform_data;
if (!pdata) {
-/* drivers/video/pvr2fb.c
+/*
+ * drivers/video/pvr2fb.c
*
* Frame buffer and fbcon support for the NEC PowerVR2 found within the Sega
* Dreamcast.
*
* Copyright (c) 2001 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2001, 2002, 2003, 2004, 2005 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (linuxdc.sourceforge.net).
+ * Copyright (c) 2001 - 2008 Paul Mundt <lethal@linux-sh.org>
*
- */
-
-/*
* This driver is mostly based on the excellent amifb and vfb sources. It uses
* an odd scheme for converting hardware values to/from framebuffer values,
* here are some hacked-up formulas:
} else {
var->sync &= ~FB_SYNC_BROADCAST;
var->vmode &= ~FB_VMODE_INTERLACED;
- var->vmode |= pvr2_var.vmode;
+ var->vmode |= FB_VMODE_NONINTERLACED;
}
if ((var->activate & FB_ACTIVATE_MASK) != FB_ACTIVATE_TEST) {
static void
rattlerSetupPlanes(struct stifb_info *fb)
{
+ int saved_id, y;
+
+ /* Write RAMDAC pixel read mask register so all overlay
+ * planes are display-enabled. (CRX24 uses Bt462 pixel
+ * read mask register for overlay planes, not image planes).
+ */
CRX24_SETUP_RAMDAC(fb);
- /* replacement for: SETUP_FB(fb, CRX24_OVERLAY_PLANES); */
- WRITE_WORD(0x83000300, fb, REG_14);
- SETUP_HW(fb);
- WRITE_BYTE(1, fb, REG_16b1);
+ /* change fb->id temporarily to fool SETUP_FB() */
+ saved_id = fb->id;
+ fb->id = CRX24_OVERLAY_PLANES;
+ SETUP_FB(fb);
+ fb->id = saved_id;
+
+ for (y = 0; y < fb->info.var.yres; ++y)
+ memset(fb->info.screen_base + y * fb->info.fix.line_length,
+ 0xff, fb->info.var.xres * fb->info.var.bits_per_pixel/8);
- fb_memset((void*)fb->info.fix.smem_start, 0xff,
- fb->info.var.yres*fb->info.fix.line_length);
-
CRX24_SET_OVLY_MASK(fb);
SETUP_FB(fb);
}
static void enable_mmio(void)
{
- unsigned char tmp;
-
/* Goto New Mode */
outb(0x0B, 0x3C4);
inb(0x3C5);
/* Unprotect registers */
outb(NewMode1, 0x3C4);
- tmp = inb(0x3C5);
outb(0x80, 0x3C5);
/* Enable MMIO */
outb(PCIReg, 0x3D4);
outb(inb(0x3D5) | 0x01, 0x3D5);
-
- t_outb(NewMode1, 0x3C4);
- t_outb(tmp, 0x3C5);
}
static void disable_mmio(void)
{
- unsigned char tmp;
-
/* Goto New Mode */
t_outb(0x0B, 0x3C4);
t_inb(0x3C5);
/* Unprotect registers */
t_outb(NewMode1, 0x3C4);
- tmp = t_inb(0x3C5);
t_outb(0x80, 0x3C5);
/* Disable MMIO */
t_outb(PCIReg, 0x3D4);
t_outb(t_inb(0x3D5) & ~0x01, 0x3D5);
-
- outb(NewMode1, 0x3C4);
- outb(tmp, 0x3C5);
}
#define crtc_unlock() write3X4(CRTVSyncEnd, read3X4(CRTVSyncEnd) & 0x7F)
switch (tmp) {
case 0x01:
- k = 512;
+ k = 512 * Kb;
break;
case 0x02:
k = 6 * Mb; /* XP */
static struct {
struct completion stop;
- volatile int running;
+ int running;
struct timer_list timer;
- volatile int queue;
+ int queue;
int default_ticks;
unsigned long inuse;
} cpu5wdt_device;
u8 reserved[5];
};
-/*
- * smbios_entry_point - defines SMBIOS entry point structure
- *
- * anchor[4] - anchor string (_SM_)
- * checksum - checksum of the entry point structure
- * length - length of the entry point structure
- * major_ver - major version (02h for revision 2.1)
- * minor_ver - minor version (01h for revision 2.1)
- * max_struct_size - size of the largest SMBIOS structure
- * revision - entry point structure revision implemented
- * formatted_area[5] - reserved
- * intermediate_anchor[5] - intermediate anchor string (_DMI_)
- * intermediate_checksum - intermediate checksum
- * table_length - structure table length
- * table_address - structure table address
- * table_num_structs - number of SMBIOS structures present
- * bcd_revision - BCD revision
- */
-struct smbios_entry_point {
- u8 anchor[4];
- u8 checksum;
- u8 length;
- u8 major_ver;
- u8 minor_ver;
- u16 max_struct_size;
- u8 revision;
- u8 formatted_area[5];
- u8 intermediate_anchor[5];
- u8 intermediate_checksum;
- u16 table_length;
- u64 table_address;
- u16 table_num_structs;
- u8 bcd_revision;
-};
-
/* type 212 */
struct smbios_cru64_info {
u8 type;
};
MODULE_DEVICE_TABLE(pci, hpwdt_devices);
-/*
- * bios_checksum
- */
-static int __devinit bios_checksum(const char __iomem *ptr, int len)
-{
- char sum = 0;
- int i;
-
- /*
- * calculate checksum of size bytes. This should add up
- * to zero if we have a valid header.
- */
- for (i = 0; i < len; i++)
- sum += ptr[i];
-
- return ((sum == 0) && (len > 0));
-}
-
#ifndef CONFIG_X86_64
/* --32 Bit Bios------------------------------------------------------------ */
#define HPWDT_ARCH 32
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
+static void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry)
{
asm("pushl %ebp \n\t"
"movl %esp, %ebp \n\t"
return retval;
}
+/*
+ * bios_checksum
+ */
+static int __devinit bios_checksum(const char __iomem *ptr, int len)
+{
+ char sum = 0;
+ int i;
+
+ /*
+ * calculate checksum of size bytes. This should add up
+ * to zero if we have a valid header.
+ */
+ for (i = 0; i < len; i++)
+ sum += ptr[i];
+
+ return ((sum == 0) && (len > 0));
+}
+
/*
* bios32_present
*
#define HPWDT_ARCH 64
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
- unsigned long *pRomEntry)
+static void asminline_call(struct cmn_registers *pi86Regs,
+ unsigned long *pRomEntry)
{
asm("pushq %rbp \n\t"
"movq %rsp, %rbp \n\t"
* dmi_find_cru
*
* Routine Description:
- * This function checks wether or not a SMBIOS/DMI record is
+ * This function checks whether or not a SMBIOS/DMI record is
* the 64bit CRU info or not
- *
- * Return Value:
- * 0 : SUCCESS - if record found
- * <0 : FAILURE - if record not found
*/
static void __devinit dmi_find_cru(const struct dmi_header *dm)
{
}
}
-/*
- * dmi_table
- *
- * Routine Description:
- * Decode the SMBIOS/DMI table and check if we have a 64bit CRU record
- * or not.
- *
- * We have to be cautious here. We have seen BIOSes with DMI pointers
- * pointing to completely the wrong place for example
- */
-static void __devinit dmi_table(u8 *buf, int len, int num,
- void (*decode)(const struct dmi_header *))
-{
- u8 *data = buf;
- int i = 0;
-
- /*
- * Stop when we see all the items the table claimed to have
- * OR we run off the end of the table (also happens)
- */
- while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
- const struct dmi_header *dm = (const struct dmi_header *)data;
-
- /*
- * We want to know the total length (formated area and strings)
- * before decoding to make sure we won't run off the table in
- * dmi_decode or dmi_string
- */
- data += dm->length;
- while ((data - buf < len - 1) && (data[0] || data[1]))
- data++;
- if (data - buf < len - 1)
- decode(dm);
- data += 2;
- i++;
- }
-}
-
-/*
- * smbios_present
- *
- * Routine Description:
- * This function parses the SMBIOS entry point table to retrieve
- * the 64 bit CRU Service.
- *
- * Return Value:
- * 0 : SUCCESS
- * <0 : FAILURE
- */
-static int __devinit smbios_present(const char __iomem *p)
-{
- struct smbios_entry_point *eps =
- (struct smbios_entry_point *) p;
- int length;
- u8 *buf;
-
- /* check if we have indeed the SMBIOS table entry point */
- if ((strncmp((char *)eps->anchor, "_SM_",
- sizeof(eps->anchor))) == 0) {
- length = eps->length;
-
- /* SMBIOS v2.1 implementation might use 0x1e */
- if ((length == 0x1e) &&
- (eps->major_ver == 2) &&
- (eps->minor_ver == 1))
- length = 0x1f;
-
- /*
- * Now we will check:
- * - SMBIOS checksum must be 0
- * - intermediate anchor should be _DMI_
- * - intermediate checksum should be 0
- */
- if ((bios_checksum(p, length)) &&
- (strncmp((char *)eps->intermediate_anchor, "_DMI_",
- sizeof(eps->intermediate_anchor)) == 0) &&
- (bios_checksum(p+0x10, 15))) {
- buf = ioremap(eps->table_address, eps->table_length);
- if (buf == NULL)
- return -ENODEV;
-
-
- /* Scan the DMI table for the 64 bit CRU service */
- dmi_table(buf, eps->table_length,
- eps->table_num_structs, dmi_find_cru);
-
- iounmap(buf);
- return 0;
- }
- }
-
- return -ENODEV;
-}
-
-static int __devinit smbios_scan_machine(void)
-{
- char __iomem *p, *q;
- int rc;
-
- if (efi_enabled) {
- if (efi.smbios == EFI_INVALID_TABLE_ADDR)
- return -ENODEV;
-
- p = ioremap(efi.smbios, 32);
- if (p == NULL)
- return -ENOMEM;
-
- rc = smbios_present(p);
- iounmap(p);
- } else {
- /*
- * Search from 0x0f0000 through 0x0fffff, inclusive.
- */
- p = ioremap(PCI_ROM_BASE1, ROM_SIZE);
- if (p == NULL)
- return -ENOMEM;
-
- for (q = p; q < p + ROM_SIZE; q += 16) {
- rc = smbios_present(q);
- if (!rc) {
- break;
- }
- }
- iounmap(p);
- }
-}
-
static int __devinit detect_cru_service(void)
{
cru_rom_addr = NULL;
- smbios_scan_machine(); /* will become dmi_walk(dmi_find_cru); */
+ dmi_walk(dmi_find_cru);
/* if cru_rom_addr has been set then we found a CRU service */
return ((cru_rom_addr != NULL)? 0: -ENODEV);
*
* drivers/char/watchdog/scx200_wdt.c
* drivers/hwmon/it87.c
- * IT8712F EC-LPC I/O Preliminary Specification 0.9.2.pdf
+ * IT8712F EC-LPC I/O Preliminary Specification 0.8.2
+ * IT8712F EC-LPC I/O Preliminary Specification 0.9.3
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+static int max_units = 255;
static int margin = 60; /* in seconds */
module_param(margin, int, 0);
MODULE_PARM_DESC(margin, "Watchdog margin in seconds");
static struct semaphore it8712f_wdt_sem;
static unsigned expect_close;
static spinlock_t io_lock;
+static unsigned char revision;
/* Dog Food address - We use the game port address */
static unsigned short address;
return val;
}
+static void
+superio_outw(int val, int reg)
+{
+ outb(reg++, REG);
+ outb((val >> 8) & 0xff, VAL);
+ outb(reg, REG);
+ outb(val & 0xff, VAL);
+}
+
static inline void
superio_select(int ldn)
{
it8712f_wdt_update_margin(void)
{
int config = WDT_OUT_KRST | WDT_OUT_PWROK;
-
- printk(KERN_INFO NAME ": timer margin %d seconds\n", margin);
-
- /* The timeout register only has 8bits wide */
- if (margin < 256)
- config |= WDT_UNIT_SEC; /* else UNIT are MINUTES */
+ int units = margin;
+
+ /* Switch to minutes precision if the configured margin
+ * value does not fit within the register width.
+ */
+ if (units <= max_units) {
+ config |= WDT_UNIT_SEC; /* else UNIT is MINUTES */
+ printk(KERN_INFO NAME ": timer margin %d seconds\n", units);
+ } else {
+ units /= 60;
+ printk(KERN_INFO NAME ": timer margin %d minutes\n", units);
+ }
superio_outb(config, WDT_CONFIG);
- superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT);
+ if (revision >= 0x08)
+ superio_outw(units, WDT_TIMEOUT);
+ else
+ superio_outb(units, WDT_TIMEOUT);
+}
+
+static int
+it8712f_wdt_get_status(void)
+{
+ if (superio_inb(WDT_CONTROL) & 0x01)
+ return WDIOF_CARDRESET;
+ else
+ return 0;
}
static void
.firmware_version = 1,
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
};
- int new_margin;
+ int value;
switch (cmd) {
default:
return -EFAULT;
return 0;
case WDIOC_GETSTATUS:
+ superio_enter();
+ superio_select(LDN_GPIO);
+
+ value = it8712f_wdt_get_status();
+
+ superio_exit();
+
+ return put_user(value, p);
case WDIOC_GETBOOTSTATUS:
return put_user(0, p);
case WDIOC_KEEPALIVE:
it8712f_wdt_ping();
return 0;
case WDIOC_SETTIMEOUT:
- if (get_user(new_margin, p))
+ if (get_user(value, p))
return -EFAULT;
- if (new_margin < 1)
+ if (value < 1)
+ return -EINVAL;
+ if (value > (max_units * 60))
return -EINVAL;
- margin = new_margin;
+ margin = value;
superio_enter();
superio_select(LDN_GPIO);
superio_exit();
it8712f_wdt_ping();
+ /* Fall through */
case WDIOC_GETTIMEOUT:
if (put_user(margin, p))
return -EFAULT;
}
err = 0;
- printk(KERN_DEBUG NAME ": Found IT%04xF chip revision %d - "
+ revision = superio_inb(DEVREV) & 0x0f;
+
+ /* Later revisions have 16-bit values per datasheet 0.9.1 */
+ if (revision >= 0x08)
+ max_units = 65535;
+
+ if (margin > (max_units * 60))
+ margin = (max_units * 60);
+
+ printk(KERN_INFO NAME ": Found IT%04xF chip revision %d - "
"using DogFood address 0x%x\n",
- chip_type, superio_inb(DEVREV) & 0x0f, *address);
+ chip_type, revision, *address);
exit:
superio_exit();
#ifndef ZF_DEBUG
# define dprintk(format, args...)
#else
-# define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __FUNCTION__, __LINE__ , ## args)
+# define dprintk(format, args...) printk(KERN_DEBUG PFX ":%s:%d: " format, __func__, __LINE__ , ## args)
#endif
static struct {
struct completion stop;
- volatile int running;
+ int running;
struct timer_list timer;
- volatile int queue;
+ int queue;
int default_ticks;
unsigned long inuse;
unsigned gpio;
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ dbg("%s - urb shutting down with status: %d", __func__, urb->status);
return;
/* -EPIPE: should clear the halt */
default: /* error */
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero urb status received: %d", __func__, urb->status);
goto resubmit;
}
}
DBG("%s: wdt_count=0x%08x, wtcon=%08lx\n",
- __FUNCTION__, wdt_count, wtcon);
+ __func__, wdt_count, wtcon);
writel(wdt_count, wdt_base + S3C2410_WTDAT);
writel(wdt_count, wdt_base + S3C2410_WTCNT);
count = timeout * freq;
DBG("%s: count=%d, timeout=%d, freq=%d\n",
- __FUNCTION__, count, timeout, freq);
+ __func__, count, timeout, freq);
/* if the count is bigger than the watchdog register,
then work out what we need to do (and if) we can
tmr_margin = timeout;
DBG("%s: timeout=%d, divisor=%d, count=%d (%08x)\n",
- __FUNCTION__, timeout, divisor, count, count/divisor);
+ __func__, timeout, divisor, count, count/divisor);
count /= divisor;
wdt_count = count;
int ret;
int size;
- DBG("%s: probe=%p\n", __FUNCTION__, pdev);
+ DBG("%s: probe=%p\n", __func__, pdev);
dev = &pdev->dev;
wdt_dev = &pdev->dev;
if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
PAGE_SIZE, vma->vm_page_prot)) {
printk(KERN_ERR PFX "%s: io_remap_pfn_range failed\n",
- __FUNCTION__);
+ __func__);
return -EAGAIN;
}
{
struct nfs_server *server = NFS_SERVER(inode);
+ if (test_bit(NFS_INO_MOUNTPOINT, &NFS_I(inode)->flags))
+ return 0;
if (nd != NULL) {
/* VFS wants an on-the-wire revalidation */
if (nd->flags & LOOKUP_REVAL)
else
inode->i_op = &nfs_mountpoint_inode_operations;
inode->i_fop = NULL;
+ set_bit(NFS_INO_MOUNTPOINT, &nfsi->flags);
}
} else if (S_ISLNK(inode->i_mode))
inode->i_op = &nfs_symlink_inode_operations;
server = NFS_SERVER(inode);
/* Update the fsid? */
- if (S_ISDIR(inode->i_mode)
- && !nfs_fsid_equal(&server->fsid, &fattr->fsid))
+ if (S_ISDIR(inode->i_mode) &&
+ !nfs_fsid_equal(&server->fsid, &fattr->fsid) &&
+ !test_bit(NFS_INO_MOUNTPOINT, &nfsi->flags))
server->fsid = fattr->fsid;
/*
*/
#include <linux/mount.h>
+#include <linux/security.h>
struct nfs_string;
char *export_path;
int protocol;
} nfs_server;
+
+ struct security_mnt_opts lsm_opts;
};
/* client.c */
static int nfs_parse_mount_options(char *raw,
struct nfs_parsed_mount_data *mnt)
{
- char *p, *string;
+ char *p, *string, *secdata;
unsigned short port = 0;
+ int rc;
if (!raw) {
dfprintk(MOUNT, "NFS: mount options string was NULL.\n");
}
dfprintk(MOUNT, "NFS: nfs mount opts='%s'\n", raw);
+ secdata = alloc_secdata();
+ if (!secdata)
+ goto out_nomem;
+
+ rc = security_sb_copy_data(raw, secdata);
+ if (rc)
+ goto out_security_failure;
+
+ rc = security_sb_parse_opts_str(secdata, &mnt->lsm_opts);
+ if (rc)
+ goto out_security_failure;
+
+ free_secdata(secdata);
+
while ((p = strsep(&raw, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
int option, token;
out_nomem:
printk(KERN_INFO "NFS: not enough memory to parse option\n");
return 0;
-
+out_security_failure:
+ free_secdata(secdata);
+ printk(KERN_INFO "NFS: security options invalid: %d\n", rc);
+ return 0;
out_unrec_vers:
printk(KERN_INFO "NFS: unrecognized NFS version number\n");
return 0;
args->namlen = data->namlen;
args->bsize = data->bsize;
args->auth_flavors[0] = data->pseudoflavor;
+
+ /*
+ * The legacy version 6 binary mount data from userspace has a
+ * field used only to transport selinux information into the
+ * the kernel. To continue to support that functionality we
+ * have a touch of selinux knowledge here in the NFS code. The
+ * userspace code converted context=blah to just blah so we are
+ * converting back to the full string selinux understands.
+ */
+ if (data->context[0]){
+#ifdef CONFIG_SECURITY_SELINUX
+ int rc;
+ char *opts_str = kmalloc(sizeof(data->context) + 8, GFP_KERNEL);
+ if (!opts_str)
+ return -ENOMEM;
+ strcpy(opts_str, "context=");
+ data->context[NFS_MAX_CONTEXT_LEN] = '\0';
+ strcat(opts_str, &data->context[0]);
+ rc = security_sb_parse_opts_str(opts_str, &args->lsm_opts);
+ kfree(opts_str);
+ if (rc)
+ return rc;
+#else
+ return -EINVAL;
+#endif
+ }
+
break;
default: {
unsigned int len;
};
int error;
+ security_init_mnt_opts(&data.lsm_opts);
+
/* Validate the mount data */
error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name);
if (error < 0)
goto error_splat_super;
}
+ error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ if (error)
+ goto error_splat_root;
+
s->s_flags |= MS_ACTIVE;
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
out:
kfree(data.nfs_server.hostname);
kfree(data.mount_server.hostname);
+ security_free_mnt_opts(&data.lsm_opts);
return error;
out_err_nosb:
nfs_free_server(server);
goto out;
+error_splat_root:
+ dput(mntroot);
error_splat_super:
up_write(&s->s_umount);
deactivate_super(s);
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ /* clone any lsm security options from the parent to the new sb */
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs_xdev_get_sb() = 0\n");
return 0;
};
int error;
+ security_init_mnt_opts(&data.lsm_opts);
+
/* Validate the mount data */
error = nfs4_validate_mount_data(raw_data, &data, dev_name);
if (error < 0)
kfree(data.client_address);
kfree(data.nfs_server.export_path);
kfree(data.nfs_server.hostname);
+ security_free_mnt_opts(&data.lsm_opts);
return error;
out_free:
*/
if (nfs_write_pageuptodate(page, inode) &&
inode->i_flock == NULL &&
- !(file->f_mode & O_SYNC)) {
+ !(file->f_flags & O_SYNC)) {
count = max(count + offset, nfs_page_length(page));
offset = 0;
}
/* delay if we're withing a RECONNECT_DELAY of the
* last attempt */
delay = (nn->nn_last_connect_attempt +
- msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
+ msecs_to_jiffies(o2net_reconnect_delay(NULL)))
- jiffies;
- if (delay > msecs_to_jiffies(o2net_reconnect_delay(sc->sc_node)))
+ if (delay > msecs_to_jiffies(o2net_reconnect_delay(NULL)))
delay = 0;
mlog(ML_CONN, "queueing conn attempt in %lu jiffies\n", delay);
queue_delayed_work(o2net_wq, &nn->nn_connect_work, delay);
spin_lock(&nn->nn_lock);
if (!nn->nn_sc_valid) {
- struct o2nm_node *node = nn->nn_sc->sc_node;
mlog(ML_ERROR, "no connection established with node %u after "
"%u.%u seconds, giving up and returning errors.\n",
o2net_num_from_nn(nn),
- o2net_idle_timeout(node) / 1000,
- o2net_idle_timeout(node) % 1000);
+ o2net_idle_timeout(NULL) / 1000,
+ o2net_idle_timeout(NULL) % 1000);
o2net_set_nn_state(nn, NULL, 0, -ENOTCONN);
}
{
struct dlm_lock_resource *lockres;
u8 real_master;
+ u8 extra_ref;
};
struct dlm_assert_master_priv
JOIN_PROTOCOL_MISMATCH,
};
+struct dlm_query_join_packet {
+ u8 code; /* Response code. dlm_minor and fs_minor
+ are only valid if this is JOIN_OK */
+ u8 dlm_minor; /* The minor version of the protocol the
+ dlm is speaking. */
+ u8 fs_minor; /* The minor version of the protocol the
+ filesystem is speaking. */
+ u8 reserved;
+};
+
union dlm_query_join_response {
u32 intval;
- struct {
- u8 code; /* Response code. dlm_minor and fs_minor
- are only valid if this is JOIN_OK */
- u8 dlm_minor; /* The minor version of the protocol the
- dlm is speaking. */
- u8 fs_minor; /* The minor version of the protocol the
- filesystem is speaking. */
- u8 reserved;
- } packet;
+ struct dlm_query_join_packet packet;
};
struct dlm_lock_request
"cookie=%u:%llu\n",
dlm_get_lock_cookie_node(be64_to_cpu(cnv->cookie)),
dlm_get_lock_cookie_seq(be64_to_cpu(cnv->cookie)));
- __dlm_print_one_lock_resource(res);
+ dlm_print_one_lock_resource(res);
goto leave;
}
return rc;
}
+/*
+ * struct dlm_query_join_packet is made up of four one-byte fields. They
+ * are effectively in big-endian order already. However, little-endian
+ * machines swap them before putting the packet on the wire (because
+ * query_join's response is a status, and that status is treated as a u32
+ * on the wire). Thus, a big-endian and little-endian machines will treat
+ * this structure differently.
+ *
+ * The solution is to have little-endian machines swap the structure when
+ * converting from the structure to the u32 representation. This will
+ * result in the structure having the correct format on the wire no matter
+ * the host endian format.
+ */
+static void dlm_query_join_packet_to_wire(struct dlm_query_join_packet *packet,
+ u32 *wire)
+{
+ union dlm_query_join_response response;
+
+ response.packet = *packet;
+ *wire = cpu_to_be32(response.intval);
+}
+
+static void dlm_query_join_wire_to_packet(u32 wire,
+ struct dlm_query_join_packet *packet)
+{
+ union dlm_query_join_response response;
+
+ response.intval = cpu_to_be32(wire);
+ *packet = response.packet;
+}
+
static int dlm_query_join_handler(struct o2net_msg *msg, u32 len, void *data,
void **ret_data)
{
struct dlm_query_join_request *query;
- union dlm_query_join_response response = {
- .packet.code = JOIN_DISALLOW,
+ struct dlm_query_join_packet packet = {
+ .code = JOIN_DISALLOW,
};
struct dlm_ctxt *dlm = NULL;
+ u32 response;
u8 nodenum;
query = (struct dlm_query_join_request *) msg->buf;
mlog(0, "node %u is not in our live map yet\n",
query->node_idx);
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
goto respond;
}
- response.packet.code = JOIN_OK_NO_MAP;
+ packet.code = JOIN_OK_NO_MAP;
spin_lock(&dlm_domain_lock);
dlm = __dlm_lookup_domain_full(query->domain, query->name_len);
mlog(0, "disallow join as node %u does not "
"have node %u in its nodemap\n",
query->node_idx, nodenum);
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
goto unlock_respond;
}
}
/*If this is a brand new context and we
* haven't started our join process yet, then
* the other node won the race. */
- response.packet.code = JOIN_OK_NO_MAP;
+ packet.code = JOIN_OK_NO_MAP;
} else if (dlm->joining_node != DLM_LOCK_RES_OWNER_UNKNOWN) {
/* Disallow parallel joins. */
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
} else if (dlm->reco.state & DLM_RECO_STATE_ACTIVE) {
mlog(0, "node %u trying to join, but recovery "
"is ongoing.\n", bit);
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
} else if (test_bit(bit, dlm->recovery_map)) {
mlog(0, "node %u trying to join, but it "
"still needs recovery.\n", bit);
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
} else if (test_bit(bit, dlm->domain_map)) {
mlog(0, "node %u trying to join, but it "
"is still in the domain! needs recovery?\n",
bit);
- response.packet.code = JOIN_DISALLOW;
+ packet.code = JOIN_DISALLOW;
} else {
/* Alright we're fully a part of this domain
* so we keep some state as to who's joining
if (dlm_query_join_proto_check("DLM", bit,
&dlm->dlm_locking_proto,
&query->dlm_proto)) {
- response.packet.code =
- JOIN_PROTOCOL_MISMATCH;
+ packet.code = JOIN_PROTOCOL_MISMATCH;
} else if (dlm_query_join_proto_check("fs", bit,
&dlm->fs_locking_proto,
&query->fs_proto)) {
- response.packet.code =
- JOIN_PROTOCOL_MISMATCH;
+ packet.code = JOIN_PROTOCOL_MISMATCH;
} else {
- response.packet.dlm_minor =
- query->dlm_proto.pv_minor;
- response.packet.fs_minor =
- query->fs_proto.pv_minor;
- response.packet.code = JOIN_OK;
+ packet.dlm_minor = query->dlm_proto.pv_minor;
+ packet.fs_minor = query->fs_proto.pv_minor;
+ packet.code = JOIN_OK;
__dlm_set_joining_node(dlm, query->node_idx);
}
}
spin_unlock(&dlm_domain_lock);
respond:
- mlog(0, "We respond with %u\n", response.packet.code);
+ mlog(0, "We respond with %u\n", packet.code);
- return response.intval;
+ dlm_query_join_packet_to_wire(&packet, &response);
+ return response;
}
static int dlm_assert_joined_handler(struct o2net_msg *msg, u32 len, void *data,
sizeof(unsigned long))) {
mlog(ML_ERROR,
"map_size %u != BITS_TO_LONGS(O2NM_MAX_NODES) %u\n",
- map_size, BITS_TO_LONGS(O2NM_MAX_NODES));
+ map_size, (unsigned)BITS_TO_LONGS(O2NM_MAX_NODES));
return -EINVAL;
}
{
int status;
struct dlm_query_join_request join_msg;
- union dlm_query_join_response join_resp;
+ struct dlm_query_join_packet packet;
+ u32 join_resp;
mlog(0, "querying node %d\n", node);
status = o2net_send_message(DLM_QUERY_JOIN_MSG, DLM_MOD_KEY, &join_msg,
sizeof(join_msg), node,
- &join_resp.intval);
+ &join_resp);
if (status < 0 && status != -ENOPROTOOPT) {
mlog_errno(status);
goto bail;
}
+ dlm_query_join_wire_to_packet(join_resp, &packet);
/* -ENOPROTOOPT from the net code means the other side isn't
listening for our message type -- that's fine, it means
if (status == -ENOPROTOOPT) {
status = 0;
*response = JOIN_OK_NO_MAP;
- } else if (join_resp.packet.code == JOIN_DISALLOW ||
- join_resp.packet.code == JOIN_OK_NO_MAP) {
- *response = join_resp.packet.code;
- } else if (join_resp.packet.code == JOIN_PROTOCOL_MISMATCH) {
+ } else if (packet.code == JOIN_DISALLOW ||
+ packet.code == JOIN_OK_NO_MAP) {
+ *response = packet.code;
+ } else if (packet.code == JOIN_PROTOCOL_MISMATCH) {
mlog(ML_NOTICE,
"This node requested DLM locking protocol %u.%u and "
"filesystem locking protocol %u.%u. At least one of "
dlm->fs_locking_proto.pv_minor,
node);
status = -EPROTO;
- *response = join_resp.packet.code;
- } else if (join_resp.packet.code == JOIN_OK) {
- *response = join_resp.packet.code;
+ *response = packet.code;
+ } else if (packet.code == JOIN_OK) {
+ *response = packet.code;
/* Use the same locking protocol as the remote node */
- dlm->dlm_locking_proto.pv_minor =
- join_resp.packet.dlm_minor;
- dlm->fs_locking_proto.pv_minor =
- join_resp.packet.fs_minor;
+ dlm->dlm_locking_proto.pv_minor = packet.dlm_minor;
+ dlm->fs_locking_proto.pv_minor = packet.fs_minor;
mlog(0,
"Node %d responds JOIN_OK with DLM locking protocol "
"%u.%u and fs locking protocol %u.%u\n",
} else {
status = -EINVAL;
mlog(ML_ERROR, "invalid response %d from node %u\n",
- join_resp.packet.code, node);
+ packet.code, node);
}
mlog(0, "status %d, node %d response is %d\n", status, node,
- *response);
+ *response);
bail:
return status;
dlm_put_mle(tmpmle);
}
send_response:
-
+ /*
+ * __dlm_lookup_lockres() grabbed a reference to this lockres.
+ * The reference is released by dlm_assert_master_worker() under
+ * the call to dlm_dispatch_assert_master(). If
+ * dlm_assert_master_worker() isn't called, we drop it here.
+ */
if (dispatch_assert) {
if (response != DLM_MASTER_RESP_YES)
mlog(ML_ERROR, "invalid response %d\n", response);
if (ret < 0) {
mlog(ML_ERROR, "failed to dispatch assert master work\n");
response = DLM_MASTER_RESP_ERROR;
+ dlm_lockres_put(res);
}
+ } else {
+ if (res)
+ dlm_lockres_put(res);
}
dlm_put(dlm);
mlog(ML_ERROR, "%s:%.*s: node %u trying to drop ref "
"but it is already dropped!\n", dlm->name,
res->lockname.len, res->lockname.name, node);
- __dlm_print_one_lock_resource(res);
+ dlm_print_one_lock_resource(res);
}
ret = 0;
goto done;
mlog(ML_ERROR, "%s:%.*s: node %u trying to drop ref "
"but it is already dropped!\n", dlm->name,
res->lockname.len, res->lockname.name, node);
- __dlm_print_one_lock_resource(res);
+ dlm_print_one_lock_resource(res);
}
dlm_lockres_put(res);
dlm_lockres_clear_refmap_bit(lock->ml.node, res);
list_del_init(&lock->list);
dlm_lock_put(lock);
+ /* In a normal unlock, we would have added a
+ * DLM_UNLOCK_FREE_LOCK action. Force it. */
+ dlm_lock_put(lock);
}
}
queue++;
return 0;
master_here:
- mlog(0, "(%d) mastering recovery of %s:%u here(this=%u)!\n",
- task_pid_nr(dlm->dlm_reco_thread_task),
- dlm->name, dlm->reco.dead_node, dlm->node_num);
+ mlog(ML_NOTICE, "(%d) Node %u is the Recovery Master for the Dead Node "
+ "%u for Domain %s\n", task_pid_nr(dlm->dlm_reco_thread_task),
+ dlm->node_num, dlm->reco.dead_node, dlm->name);
status = dlm_remaster_locks(dlm, dlm->reco.dead_node);
if (status < 0) {
(ml->type == LKM_EXMODE ||
memcmp(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN))) {
mlog(ML_ERROR, "mismatched lvbs!\n");
- __dlm_print_one_lock_resource(lock->lockres);
+ dlm_print_one_lock_resource(lock->lockres);
BUG();
}
memcpy(mres->lvb, lock->lksb->lvb, DLM_LVB_LEN);
(struct dlm_migratable_lockres *)msg->buf;
int ret = 0;
u8 real_master;
+ u8 extra_refs = 0;
char *buf = NULL;
struct dlm_work_item *item = NULL;
struct dlm_lock_resource *res = NULL;
__dlm_insert_lockres(dlm, res);
spin_unlock(&dlm->spinlock);
+ /* Add an extra ref for this lock-less lockres lest the
+ * dlm_thread purges it before we get the chance to add
+ * locks to it */
+ dlm_lockres_get(res);
+
+ /* There are three refs that need to be put.
+ * 1. Taken above.
+ * 2. kref_init in dlm_new_lockres()->dlm_init_lockres().
+ * 3. dlm_lookup_lockres()
+ * The first one is handled at the end of this function. The
+ * other two are handled in the worker thread after locks have
+ * been attached. Yes, we don't wait for purge time to match
+ * kref_init. The lockres will still have atleast one ref
+ * added because it is in the hash __dlm_insert_lockres() */
+ extra_refs++;
+
/* now that the new lockres is inserted,
* make it usable by other processes */
spin_lock(&res->spinlock);
res->state &= ~DLM_LOCK_RES_IN_PROGRESS;
spin_unlock(&res->spinlock);
wake_up(&res->wq);
-
- /* add an extra ref for just-allocated lockres
- * otherwise the lockres will be purged immediately */
- dlm_lockres_get(res);
}
/* at this point we have allocated everything we need,
dlm_init_work_item(dlm, item, dlm_mig_lockres_worker, buf);
item->u.ml.lockres = res; /* already have a ref */
item->u.ml.real_master = real_master;
+ item->u.ml.extra_ref = extra_refs;
spin_lock(&dlm->work_lock);
list_add_tail(&item->list, &dlm->work_list);
spin_unlock(&dlm->work_lock);
queue_work(dlm->dlm_worker, &dlm->dispatched_work);
leave:
+ /* One extra ref taken needs to be put here */
+ if (extra_refs)
+ dlm_lockres_put(res);
+
dlm_put(dlm);
if (ret < 0) {
if (buf)
static void dlm_mig_lockres_worker(struct dlm_work_item *item, void *data)
{
- struct dlm_ctxt *dlm = data;
+ struct dlm_ctxt *dlm;
struct dlm_migratable_lockres *mres;
int ret = 0;
struct dlm_lock_resource *res;
u8 real_master;
+ u8 extra_ref;
dlm = item->dlm;
mres = (struct dlm_migratable_lockres *)data;
res = item->u.ml.lockres;
real_master = item->u.ml.real_master;
+ extra_ref = item->u.ml.extra_ref;
if (real_master == DLM_LOCK_RES_OWNER_UNKNOWN) {
/* this case is super-rare. only occurs if
}
leave:
+ /* See comment in dlm_mig_lockres_handler() */
+ if (res) {
+ if (extra_ref)
+ dlm_lockres_put(res);
+ dlm_lockres_put(res);
+ }
kfree(data);
mlog_exit(ret);
}
/* retry!? */
BUG();
}
- }
+ } else /* put.. incase we are not the master */
+ dlm_lockres_put(res);
spin_unlock(&res->spinlock);
}
spin_unlock(&dlm->spinlock);
"Recovering res %s:%.*s, is already on recovery list!\n",
dlm->name, res->lockname.len, res->lockname.name);
list_del_init(&res->recovering);
+ dlm_lockres_put(res);
}
/* We need to hold a reference while on the recovery list */
dlm_lockres_get(res);
assert_spin_locked(&dlm->spinlock);
assert_spin_locked(&res->spinlock);
+ /* We do two dlm_lock_put(). One for removing from list and the other is
+ * to force the DLM_UNLOCK_FREE_LOCK action so as to free the locks */
+
/* TODO: check pending_asts, pending_basts here */
list_for_each_entry_safe(lock, next, &res->granted, list) {
if (lock->ml.node == dead_node) {
list_del_init(&lock->list);
dlm_lock_put(lock);
+ /* Can't schedule DLM_UNLOCK_FREE_LOCK - do manually */
+ dlm_lock_put(lock);
freed++;
}
}
if (lock->ml.node == dead_node) {
list_del_init(&lock->list);
dlm_lock_put(lock);
+ /* Can't schedule DLM_UNLOCK_FREE_LOCK - do manually */
+ dlm_lock_put(lock);
freed++;
}
}
if (lock->ml.node == dead_node) {
list_del_init(&lock->list);
dlm_lock_put(lock);
+ /* Can't schedule DLM_UNLOCK_FREE_LOCK - do manually */
+ dlm_lock_put(lock);
freed++;
}
}
res->lockname.name, master);
if (!master) {
+ /* drop spinlock... retake below */
+ spin_unlock(&dlm->spinlock);
+
spin_lock(&res->spinlock);
/* This ensures that clear refmap is sent after the set */
__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG);
spin_unlock(&res->spinlock);
- /* drop spinlock to do messaging, retake below */
- spin_unlock(&dlm->spinlock);
+
/* clear our bit from the master's refmap, ignore errors */
ret = dlm_drop_lockres_ref(dlm, res);
if (ret < 0) {
return 0;
}
-static struct seq_operations ocfs2_dlm_seq_ops = {
+static const struct seq_operations ocfs2_dlm_seq_ops = {
.start = ocfs2_dlm_seq_start,
.stop = ocfs2_dlm_seq_stop,
.next = ocfs2_dlm_seq_next,
memset(cr, 0, sizeof(struct ocfs2_chain_rec));
}
- cr->c_blkno = le64_to_cpu(input->group);
+ cr->c_blkno = cpu_to_le64(input->group);
le32_add_cpu(&cr->c_total, input->clusters * cl_bpc);
le32_add_cpu(&cr->c_free, input->frees * cl_bpc);
DIR("task", S_IRUGO|S_IXUGO, task),
DIR("fd", S_IRUSR|S_IXUSR, fd),
DIR("fdinfo", S_IRUSR|S_IXUSR, fdinfo),
+#ifdef CONFIG_NET
+ DIR("net", S_IRUGO|S_IXUSR, net),
+#endif
REG("environ", S_IRUSR, environ),
INF("auxv", S_IRUSR, pid_auxv),
ONE("status", S_IRUGO, pid_status),
* Don't create negative dentries here, return -ENOENT by hand
* instead.
*/
-struct dentry *proc_lookup(struct inode * dir, struct dentry *dentry, struct nameidata *nd)
+struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir,
+ struct dentry *dentry)
{
struct inode *inode = NULL;
- struct proc_dir_entry * de;
int error = -ENOENT;
lock_kernel();
spin_lock(&proc_subdir_lock);
- de = PDE(dir);
if (de) {
for (de = de->subdir; de ; de = de->next) {
if (de->namelen != dentry->d_name.len)
if (!memcmp(dentry->d_name.name, de->name, de->namelen)) {
unsigned int ino;
- if (de->shadow_proc)
- de = de->shadow_proc(current, de);
ino = de->low_ino;
de_get(de);
spin_unlock(&proc_subdir_lock);
return ERR_PTR(error);
}
+struct dentry *proc_lookup(struct inode *dir, struct dentry *dentry,
+ struct nameidata *nd)
+{
+ return proc_lookup_de(PDE(dir), dir, dentry);
+}
+
/*
* This returns non-zero if at EOF, so that the /proc
* root directory can use this and check if it should
* value of the readdir() call, as long as it's non-negative
* for success..
*/
-int proc_readdir(struct file * filp,
- void * dirent, filldir_t filldir)
+int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent,
+ filldir_t filldir)
{
- struct proc_dir_entry * de;
unsigned int ino;
int i;
struct inode *inode = filp->f_path.dentry->d_inode;
lock_kernel();
ino = inode->i_ino;
- de = PDE(inode);
if (!de) {
ret = -EINVAL;
goto out;
return ret;
}
+int proc_readdir(struct file *filp, void *dirent, filldir_t filldir)
+{
+ struct inode *inode = filp->f_path.dentry->d_inode;
+
+ return proc_readdir_de(PDE(inode), filp, dirent, filldir);
+}
+
/*
* These are the generic /proc directory operations. They
* use the in-memory "struct proc_dir_entry" tree to parse
extern const struct file_operations proc_smaps_operations;
extern const struct file_operations proc_clear_refs_operations;
extern const struct file_operations proc_pagemap_operations;
+extern const struct file_operations proc_net_operations;
+extern const struct inode_operations proc_net_inode_operations;
void free_proc_entry(struct proc_dir_entry *de);
{
return PROC_I(inode)->fd;
}
+
+struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *ino,
+ struct dentry *dentry);
+int proc_readdir_de(struct proc_dir_entry *de, struct file *filp, void *dirent,
+ filldir_t filldir);
}
EXPORT_SYMBOL_GPL(seq_release_net);
+static struct net *get_proc_task_net(struct inode *dir)
+{
+ struct task_struct *task;
+ struct nsproxy *ns;
+ struct net *net = NULL;
+
+ rcu_read_lock();
+ task = pid_task(proc_pid(dir), PIDTYPE_PID);
+ if (task != NULL) {
+ ns = task_nsproxy(task);
+ if (ns != NULL)
+ net = get_net(ns->net_ns);
+ }
+ rcu_read_unlock();
+
+ return net;
+}
+
+static struct dentry *proc_tgid_net_lookup(struct inode *dir,
+ struct dentry *dentry, struct nameidata *nd)
+{
+ struct dentry *de;
+ struct net *net;
+
+ de = ERR_PTR(-ENOENT);
+ net = get_proc_task_net(dir);
+ if (net != NULL) {
+ de = proc_lookup_de(net->proc_net, dir, dentry);
+ put_net(net);
+ }
+ return de;
+}
+
+static int proc_tgid_net_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct inode *inode = dentry->d_inode;
+ struct net *net;
+
+ net = get_proc_task_net(inode);
+
+ generic_fillattr(inode, stat);
+
+ if (net != NULL) {
+ stat->nlink = net->proc_net->nlink;
+ put_net(net);
+ }
+
+ return 0;
+}
+
+const struct inode_operations proc_net_inode_operations = {
+ .lookup = proc_tgid_net_lookup,
+ .getattr = proc_tgid_net_getattr,
+};
+
+static int proc_tgid_net_readdir(struct file *filp, void *dirent,
+ filldir_t filldir)
+{
+ int ret;
+ struct net *net;
+
+ ret = -EINVAL;
+ net = get_proc_task_net(filp->f_path.dentry->d_inode);
+ if (net != NULL) {
+ ret = proc_readdir_de(net->proc_net, filp, dirent, filldir);
+ put_net(net);
+ }
+ return ret;
+}
+
+const struct file_operations proc_net_operations = {
+ .read = generic_read_dir,
+ .readdir = proc_tgid_net_readdir,
+};
+
struct proc_dir_entry *proc_net_fops_create(struct net *net,
const char *name, mode_t mode, const struct file_operations *fops)
}
EXPORT_SYMBOL_GPL(get_proc_net);
-static struct proc_dir_entry *shadow_pde;
-
-static struct proc_dir_entry *proc_net_shadow(struct task_struct *task,
- struct proc_dir_entry *de)
-{
- return task->nsproxy->net_ns->proc_net;
-}
-
struct proc_dir_entry *proc_net_mkdir(struct net *net, const char *name,
struct proc_dir_entry *parent)
{
static __net_init int proc_net_ns_init(struct net *net)
{
- struct proc_dir_entry *root, *netd, *net_statd;
+ struct proc_dir_entry *netd, *net_statd;
int err;
err = -ENOMEM;
- root = kzalloc(sizeof(*root), GFP_KERNEL);
- if (!root)
+ netd = kzalloc(sizeof(*netd), GFP_KERNEL);
+ if (!netd)
goto out;
- err = -EEXIST;
- netd = proc_net_mkdir(net, "net", root);
- if (!netd)
- goto free_root;
+ netd->data = net;
+ netd->nlink = 2;
+ netd->name = "net";
+ netd->namelen = 3;
+ netd->parent = &proc_root;
err = -EEXIST;
net_statd = proc_net_mkdir(net, "stat", netd);
if (!net_statd)
goto free_net;
- root->data = net;
-
- net->proc_net_root = root;
net->proc_net = netd;
net->proc_net_stat = net_statd;
- err = 0;
+ return 0;
+free_net:
+ kfree(netd);
out:
return err;
-free_net:
- remove_proc_entry("net", root);
-free_root:
- kfree(root);
- goto out;
}
static __net_exit void proc_net_ns_exit(struct net *net)
{
remove_proc_entry("stat", net->proc_net);
- remove_proc_entry("net", net->proc_net_root);
- kfree(net->proc_net_root);
+ kfree(net->proc_net);
}
static struct pernet_operations __net_initdata proc_net_ns_ops = {
int __init proc_net_init(void)
{
- shadow_pde = proc_mkdir("net", NULL);
- shadow_pde->shadow_proc = proc_net_shadow;
+ proc_symlink("net", NULL, "self/net");
return register_pernet_subsys(&proc_net_ns_ops);
}
if (!mnt)
goto out;
- if (data) {
+ if (data && !(type->fs_flags & FS_BINARY_MOUNTDATA)) {
secdata = alloc_secdata();
if (!secdata)
goto out_mnt;
- error = security_sb_copy_data(type, data, secdata);
+ error = security_sb_copy_data(data, secdata);
if (error)
goto out_free_secdata;
}
*/
new_icl = kmem_zone_alloc(xfs_icluster_zone, KM_SLEEP);
if (radix_tree_preload(GFP_KERNEL)) {
+ xfs_idestroy(ip);
delay(1);
goto again;
}
xfs_log_force(mp, (xfs_lsn_t)0, XFS_LOG_FORCE);
}
- /*
- * We reached the target so wait a bit longer for I/O to complete and
- * remove pushed items from the AIL before we start the next scan from
- * the start of the AIL.
- */
- if ((XFS_LSN_CMP(lsn, target) >= 0)) {
+ if (!count) {
+ /* We're past our target or empty, so idle */
+ tout = 1000;
+ } else if (XFS_LSN_CMP(lsn, target) >= 0) {
+ /*
+ * We reached the target so wait a bit longer for I/O to
+ * complete and remove pushed items from the AIL before we
+ * start the next scan from the start of the AIL.
+ */
tout += 20;
last_pushed_lsn = 0;
} else if ((restarts > XFS_TRANS_PUSH_AIL_RESTARTS) ||
- (count && ((stuck * 100) / count > 90))) {
+ ((stuck * 100) / count > 90)) {
/*
* Either there is a lot of contention on the AIL or we
* are stuck due to operations in progress. "Stuck" in this
struct sram_list_struct *tmp;
if (current_l1_stack_save == mm->context.l1_stack_save)
- current_l1_stack_save = 0;
+ current_l1_stack_save = NULL;
if (mm->context.l1_stack_save)
free_l1stack();
#define __NR_epoll_pwait 346
#define __NR_utimensat 347
#define __NR_signalfd 348
-#define __NR_timerfd 349
+#define __NR_timerfd_create 349
#define __NR_eventfd 350
#define __NR_pread64 351
#define __NR_pwrite64 352
#define __NR_get_robust_list 355
#define __NR_fallocate 356
#define __NR_semtimedop 357
+#define __NR_timerfd_settime 358
+#define __NR_timerfd_gettime 359
-#define __NR_syscall 358
+#define __NR_syscall 360
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
unsigned short slot;
};
-extern int kprobes_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
extern int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
#include <asm/current.h>
#include <asm/page.h>
-#define __ARCH_SYS_PTRACE 1
-
/*
* We use the ia64_psr(regs)->ri to determine which of the three
* instructions in bundle (16 bytes) took the sample. Generate
#define arch_ptrace_attach(child) \
ptrace_attach_sync_user_rbs(child)
+ #define arch_has_single_step() (1)
+ extern void user_enable_single_step(struct task_struct *);
+ extern void user_disable_single_step(struct task_struct *);
+
+ #define arch_has_block_step() (1)
+ extern void user_enable_block_step(struct task_struct *);
+
#endif /* !__KERNEL__ */
/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
clear_bit(PG_dcache_dirty, &(page)->flags)
/* Run kernel code uncached, useful for cache probing functions. */
-unsigned long __init run_uncached(void *func);
+unsigned long run_uncached(void *func);
extern void *kmap_coherent(struct page *page, unsigned long addr);
extern void kunmap_coherent(void);
* easily, subsequent pte tables have to be allocated in one physical
* chunk of RAM.
*/
-#define PKMAP_BASE (0xfe000000UL)
#define LAST_PKMAP 1024
#define LAST_PKMAP_MASK (LAST_PKMAP-1)
#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
#define cpu_has_64bits 1
#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_6k_cache 0
#define cpu_has_4k_cache 1
+#define cpu_has_8k_cache 0
+#define cpu_has_tx39_cache 0
#define cpu_has_inclusive_pcaches 1
{
#define TXX9_DIRECTMAP_BASE 0xff000000ul
if (offset >= TXX9_DIRECTMAP_BASE &&
- offset < TXX9_DIRECTMAP_BASE + 0xf0000)
+ offset < TXX9_DIRECTMAP_BASE + 0xff0000)
return (void __iomem *)offset;
return NULL;
}
#ifndef _ASM_MACH_LASAT_IRQ_H
#define _ASM_MACH_LASAT_IRQ_H
-#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 0)
+#define LASAT_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 2)
#define LASAT_IRQ_BASE 8
#define LASAT_IRQ_END 23
#define VMALLOC_START MAP_BASE
+#define PKMAP_BASE (0xfe000000UL)
+
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
#else
* Initialize the count register as a clocksource
*/
#ifdef CONFIG_CEVT_R4K
-extern void init_mips_clocksource(void);
+extern int init_mips_clocksource(void);
#else
-static inline void init_mips_clocksource(void)
+static inline int init_mips_clocksource(void)
{
+ return 0;
}
#endif
include include/asm-generic/Kbuild.asm
-
-unifdef-y += termios.h
-unifdef-y += ptrace.h
-unifdef-y += page.h
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization. This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- * -- paulus
- */
#define _PTE_NONE_MASK _PAGE_ACCESSED
#else /* CONFIG_6xx */
#define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c
-/*
- * The 8xx TLB miss handler allegedly sets _PAGE_ACCESSED in the PTE
- * for an address even if _PAGE_PRESENT is not set, as a performance
- * optimization. This is a bug if you ever want to use swap unless
- * _PAGE_ACCESSED is 2, which it isn't, or unless you have 8xx-specific
- * definitions for __swp_entry etc. below, which would be gross.
- * -- paulus
- */
#define _PTE_NONE_MASK _PAGE_ACCESSED
#else /* CONFIG_6xx */
extern void __const_udelay(unsigned long xloops);
extern void __delay(unsigned long loops);
-#ifdef CONFIG_SUPERH32
#define udelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
__udelay(n))
#define ndelay(n) (__builtin_constant_p(n) ? \
((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
__ndelay(n))
-#else
-extern void udelay(unsigned long usecs);
-extern void ndelay(unsigned long nsecs);
-#endif
#endif /* __ASM_SH_DELAY_H */
unifdef-y += mce.h
unifdef-y += msr.h
unifdef-y += mtrr.h
-unifdef-y += page.h
unifdef-y += posix_types_32.h
unifdef-y += posix_types_64.h
unifdef-y += ptrace.h
struct vm_area_struct;
extern pgd_t swapper_pg_dir[1024];
-extern struct kmem_cache *pmd_cache;
-void check_pgt_cache(void);
-static inline void pgtable_cache_init(void) {}
+static inline void pgtable_cache_init(void) { }
+static inline void check_pgt_cache(void) { }
void paging_init(void);
#include <crypto/algapi.h>
#include <crypto/skcipher.h>
+#include <linux/init.h>
#include <linux/types.h>
struct rtattr;
int skcipher_geniv_init(struct crypto_tfm *tfm);
void skcipher_geniv_exit(struct crypto_tfm *tfm);
+int __init eseqiv_module_init(void);
+void __exit eseqiv_module_exit(void);
+int __init chainiv_module_init(void);
+void chainiv_module_exit(void);
+
static inline struct crypto_ablkcipher *skcipher_geniv_cipher(
struct crypto_ablkcipher *geniv)
{
unifdef-y += fs.h
unifdef-y += gameport.h
unifdef-y += generic_serial.h
-unifdef-y += genhd.h
unifdef-y += gfs2_ondisk.h
unifdef-y += hayesesp.h
unifdef-y += hdlcdrv.h
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
+#include <linux/types.h>
/* This should work for both 32 and 64 bit userland. */
struct ethtool_cmd {
size_t size;
u8 *data;
};
+
struct device;
+
+#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)
int request_firmware(const struct firmware **fw, const char *name,
struct device *device);
int request_firmware_nowait(
void (*cont)(const struct firmware *fw, void *context));
void release_firmware(const struct firmware *fw);
+#else
+static inline int request_firmware(const struct firmware **fw,
+ const char *name,
+ struct device *device)
+{
+ return -EINVAL;
+}
+static inline int request_firmware_nowait(
+ struct module *module, int uevent,
+ const char *name, struct device *device, void *context,
+ void (*cont)(const struct firmware *fw, void *context))
+{
+ return -EINVAL;
+}
+
+static inline void release_firmware(const struct firmware *fw)
+{
+}
+#endif
+
#endif
UNIXWARE_PARTITION = 0x63, /* Same as GNU_HURD and SCO Unix */
};
-#ifndef __KERNEL__
-
-struct partition {
- unsigned char boot_ind; /* 0x80 - active */
- unsigned char head; /* starting head */
- unsigned char sector; /* starting sector */
- unsigned char cyl; /* starting cylinder */
- unsigned char sys_ind; /* What partition type */
- unsigned char end_head; /* end head */
- unsigned char end_sector; /* end sector */
- unsigned char end_cyl; /* end cylinder */
- unsigned int start_sect; /* starting sector counting from 0 */
- unsigned int nr_sects; /* nr of sectors in partition */
-} __attribute__((packed));
-
-#endif
-
-#ifdef __KERNEL__
#include <linux/major.h>
#include <linux/device.h>
#include <linux/smp.h>
sizeof(struct disk_stats));
}
-#else
+#else /* !CONFIG_SMP */
#define __disk_stat_add(gendiskp, field, addnd) \
(gendiskp->dkstats.field += addnd)
#define disk_stat_read(gendiskp, field) (gendiskp->dkstats.field)
memset(&part->dkstats, value, sizeof(struct disk_stats));
}
-#endif
+#endif /* CONFIG_SMP */
#define disk_stat_add(gendiskp, field, addnd) \
do { \
disk->capacity = size;
}
-#endif /* __KERNEL__ */
-
#ifdef CONFIG_SOLARIS_X86_PARTITION
#define SOLARIS_X86_NUMSLICE 16
# define MINIX_NR_SUBPARTITIONS 4
#endif /* CONFIG_MINIX_SUBPARTITION */
-#ifdef __KERNEL__
-
#define ADDPART_FLAG_NONE 0
#define ADDPART_FLAG_RAID 1
#define ADDPART_FLAG_WHOLEDISK 2
return bdget(MKDEV(disk->major, disk->first_minor) + index);
}
-#endif
-
#else /* CONFIG_BLOCK */
static inline void printk_all_partitions(void) { }
#endif /* CONFIG_BLOCK */
-#endif
+#endif /* _LINUX_GENHD_H */
unsigned char reserved;
unsigned char interrupt;
#define MEMSTICK_INT_CMDNAK 0x0001
+#define MEMSTICK_INT_IOREQ 0x0008
+#define MEMSTICK_INT_IOBREQ 0x0010
#define MEMSTICK_INT_BREQ 0x0020
#define MEMSTICK_INT_ERR 0x0040
#define MEMSTICK_INT_CED 0x0080
struct ms_id_register {
unsigned char type;
- unsigned char reserved;
+ unsigned char if_mode;
unsigned char category;
unsigned char class;
} __attribute__((packed));
struct ms_param_register {
unsigned char system;
+#define MEMSTICK_SYS_ATEN 0xc0
+#define MEMSTICK_SYS_BAMD 0x80
+#define MEMSTICK_SYS_PAM 0x08
+
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
struct mspro_param_register {
unsigned char system;
+#define MEMSTICK_SYS_SERIAL 0x80
+#define MEMSTICK_SYS_PAR4 0x00
+#define MEMSTICK_SYS_PAR8 0x40
+
+ unsigned short data_count;
+ unsigned int data_address;
+ unsigned char tpc_param;
+} __attribute__((packed));
+
+struct mspro_io_info_register {
+ unsigned char version;
+ unsigned char io_category;
+ unsigned char current_req;
+ unsigned char card_opt_info;
+ unsigned char rdy_wait_time;
+} __attribute__((packed));
+
+struct mspro_io_func_register {
+ unsigned char func_enable;
+ unsigned char func_select;
+ unsigned char func_intmask;
+ unsigned char transfer_mode;
+} __attribute__((packed));
+
+struct mspro_io_cmd_register {
+ unsigned short tpc_param;
unsigned short data_count;
unsigned int data_address;
- unsigned char cmd_param;
} __attribute__((packed));
struct mspro_register {
- struct ms_status_register status;
- struct ms_id_register id;
- unsigned char reserved[8];
- struct mspro_param_register param;
+ struct ms_status_register status;
+ struct ms_id_register id;
+ unsigned char reserved0[8];
+ struct mspro_param_register param;
+ unsigned char reserved1[8];
+ struct mspro_io_info_register io_info;
+ struct mspro_io_func_register io_func;
+ unsigned char reserved2[7];
+ struct mspro_io_cmd_register io_cmd;
+ unsigned char io_int;
+ unsigned char io_int_func;
} __attribute__((packed));
struct ms_register_addr {
} __attribute__((packed));
enum {
+ MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
+ MS_TPC_READ_MG_DATA = 0x03,
MS_TPC_READ_REG = 0x04,
- MS_TPC_READ_IO_DATA = 0x05, /* unverified */
+ MS_TPC_READ_QUAD_DATA = 0x05,
+ MS_TPC_READ_IO_DATA = 0x05,
MS_TPC_GET_INT = 0x07,
MS_TPC_SET_RW_REG_ADRS = 0x08,
MS_TPC_EX_SET_CMD = 0x09,
- MS_TPC_WRITE_IO_DATA = 0x0a, /* unverified */
+ MS_TPC_WRITE_QUAD_DATA = 0x0a,
+ MS_TPC_WRITE_IO_DATA = 0x0a,
MS_TPC_WRITE_REG = 0x0b,
MS_TPC_WRITE_SHORT_DATA = 0x0c,
+ MS_TPC_WRITE_MG_DATA = 0x0c,
MS_TPC_WRITE_LONG_DATA = 0x0d,
MS_TPC_SET_CMD = 0x0e
};
enum {
- MS_CMD_BLOCK_END = 0x33,
- MS_CMD_RESET = 0x3c,
- MS_CMD_BLOCK_WRITE = 0x55,
- MS_CMD_SLEEP = 0x5a,
- MS_CMD_BLOCK_ERASE = 0x99,
- MS_CMD_BLOCK_READ = 0xaa,
- MS_CMD_CLEAR_BUF = 0xc3,
- MS_CMD_FLASH_STOP = 0xcc,
- MSPRO_CMD_FORMAT = 0x10,
- MSPRO_CMD_SLEEP = 0x11,
- MSPRO_CMD_READ_DATA = 0x20,
- MSPRO_CMD_WRITE_DATA = 0x21,
- MSPRO_CMD_READ_ATRB = 0x24,
- MSPRO_CMD_STOP = 0x25,
- MSPRO_CMD_ERASE = 0x26,
- MSPRO_CMD_SET_IBA = 0x46,
- MSPRO_CMD_SET_IBD = 0x47
-/*
- MSPRO_CMD_RESET
- MSPRO_CMD_WAKEUP
- MSPRO_CMD_IN_IO_DATA
- MSPRO_CMD_OUT_IO_DATA
- MSPRO_CMD_READ_IO_ATRB
- MSPRO_CMD_IN_IO_FIFO
- MSPRO_CMD_OUT_IO_FIFO
- MSPRO_CMD_IN_IOM
- MSPRO_CMD_OUT_IOM
-*/
+ MS_CMD_BLOCK_END = 0x33,
+ MS_CMD_RESET = 0x3c,
+ MS_CMD_BLOCK_WRITE = 0x55,
+ MS_CMD_SLEEP = 0x5a,
+ MS_CMD_BLOCK_ERASE = 0x99,
+ MS_CMD_BLOCK_READ = 0xaa,
+ MS_CMD_CLEAR_BUF = 0xc3,
+ MS_CMD_FLASH_STOP = 0xcc,
+ MS_CMD_LOAD_ID = 0x60,
+ MS_CMD_CMP_ICV = 0x7f,
+ MSPRO_CMD_FORMAT = 0x10,
+ MSPRO_CMD_SLEEP = 0x11,
+ MSPRO_CMD_WAKEUP = 0x12,
+ MSPRO_CMD_READ_DATA = 0x20,
+ MSPRO_CMD_WRITE_DATA = 0x21,
+ MSPRO_CMD_READ_ATRB = 0x24,
+ MSPRO_CMD_STOP = 0x25,
+ MSPRO_CMD_ERASE = 0x26,
+ MSPRO_CMD_READ_QUAD = 0x27,
+ MSPRO_CMD_WRITE_QUAD = 0x28,
+ MSPRO_CMD_SET_IBD = 0x46,
+ MSPRO_CMD_GET_IBD = 0x47,
+ MSPRO_CMD_IN_IO_DATA = 0xb0,
+ MSPRO_CMD_OUT_IO_DATA = 0xb1,
+ MSPRO_CMD_READ_IO_ATRB = 0xb2,
+ MSPRO_CMD_IN_IO_FIFO = 0xb3,
+ MSPRO_CMD_OUT_IO_FIFO = 0xb4,
+ MSPRO_CMD_IN_IOM = 0xb5,
+ MSPRO_CMD_OUT_IOM = 0xb6,
};
/*** Driver structures and functions ***/
#define MEMSTICK_POWER_ON 1
#define MEMSTICK_SERIAL 0
-#define MEMSTICK_PARALLEL 1
+#define MEMSTICK_PAR4 1
+#define MEMSTICK_PAR8 2
struct memstick_host;
struct memstick_driver;
unsigned char data_dir:1,
need_card_int:1,
get_int_reg:1,
- io_type:2;
-#define MEMSTICK_IO_NONE 0
-#define MEMSTICK_IO_VAL 1
-#define MEMSTICK_IO_SG 2
-
+ long_data:1;
unsigned char int_reg;
int error;
union {
struct mutex lock;
unsigned int id;
unsigned int caps;
-#define MEMSTICK_CAP_PARALLEL 1
-#define MEMSTICK_CAP_AUTO_GET_INT 2
+#define MEMSTICK_CAP_AUTO_GET_INT 1
+#define MEMSTICK_CAP_PAR4 2
+#define MEMSTICK_CAP_PAR8 4
struct work_struct media_checker;
struct class_device cdev;
void memstick_remove_host(struct memstick_host *host);
void memstick_free_host(struct memstick_host *host);
void memstick_detect_change(struct memstick_host *host);
+void memstick_suspend_host(struct memstick_host *host);
+void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
struct scatterlist *sg);
struct page *vmalloc_to_page(const void *addr);
unsigned long vmalloc_to_pfn(const void *addr);
-#ifdef CONFIG_MMU
-/* Determine if an address is within the vmalloc range */
+/*
+ * Determine if an address is within the vmalloc range
+ *
+ * On nommu, vmalloc/vfree wrap through kmalloc/kfree directly, so there
+ * is no special casing required.
+ */
static inline int is_vmalloc_addr(const void *x)
{
+#ifdef CONFIG_MMU
unsigned long addr = (unsigned long)x;
return addr >= VMALLOC_START && addr < VMALLOC_END;
-}
+#else
+ return 0;
#endif
+}
static inline struct page *compound_head(struct page *page)
{
#ifndef _NFNETLINK_COMPAT_H
#define _NFNETLINK_COMPAT_H
-#ifndef __KERNEL
+#ifndef __KERNEL__
/* Old nfnetlink macros for userspace */
/* nfnetlink groups: Up to 32 maximum */
#define NFS_INO_ADVISE_RDPLUS (1) /* advise readdirplus */
#define NFS_INO_STALE (2) /* possible stale inode */
#define NFS_INO_ACL_LRU_SET (3) /* Inode is on the LRU list */
+#define NFS_INO_MOUNTPOINT (4) /* inode is remote mountpoint */
static inline struct nfs_inode *NFS_I(const struct inode *inode)
{
#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
/**
- * DECLARE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
* @_table: device table name
*
* This macro is used to create a struct pci_device_id array (a device table)
* in a generic manner.
*/
-#define DECLARE_PCI_DEVICE_TABLE(_table) \
+#define DEFINE_PCI_DEVICE_TABLE(_table) \
const struct pci_device_id _table[] __devinitconst
/**
#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366
#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368
#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381
+#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383
#define PCI_VENDOR_ID_KORENIX 0x1982
#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600
/* For use before switching interrupts off for a long time;
* warning: not stackable
*/
+#if defined(CONFIG_ADB_PMU)
extern void pmu_suspend(void);
extern void pmu_resume(void);
+#else
+static inline void pmu_suspend(void)
+{}
+static inline void pmu_resume(void)
+{}
+#endif
extern void pmu_enable_irled(int on);
extern void pmu_backlight_init(void);
/* some code needs to know if the PMU was suspended for hibernation */
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
extern int pmu_sys_suspended;
#else
/* if power management is not configured it can't be suspended */
typedef int (write_proc_t)(struct file *file, const char __user *buffer,
unsigned long count, void *data);
typedef int (get_info_t)(char *, char **, off_t, int);
-typedef struct proc_dir_entry *(shadow_proc_t)(struct task_struct *task,
- struct proc_dir_entry *pde);
struct proc_dir_entry {
unsigned int low_ino;
int pde_users; /* number of callers into module in progress */
spinlock_t pde_unload_lock; /* proc_fops checks and pde_users bumps */
struct completion *pde_unload_completion;
- shadow_proc_t *shadow_proc;
};
struct kcore_list {
int running);
void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
int oldprio, int running);
+
+#ifdef CONFIG_FAIR_GROUP_SCHED
+ void (*moved_group) (struct task_struct *p);
+#endif
};
struct load_weight {
#include <linux/xfrm.h>
#include <net/flow.h>
-/* only a char in selinux superblock security struct flags */
-#define FSCONTEXT_MNT 0x01
-#define CONTEXT_MNT 0x02
-#define ROOTCONTEXT_MNT 0x04
-#define DEFCONTEXT_MNT 0x08
-
extern unsigned securebits;
struct ctl_table;
#ifdef CONFIG_SECURITY
+struct security_mnt_opts {
+ char **mnt_opts;
+ int *mnt_opts_flags;
+ int num_mnt_opts;
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+ opts->mnt_opts = NULL;
+ opts->mnt_opts_flags = NULL;
+ opts->num_mnt_opts = 0;
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+ int i;
+ if (opts->mnt_opts)
+ for(i = 0; i < opts->num_mnt_opts; i++)
+ kfree(opts->mnt_opts[i]);
+ kfree(opts->mnt_opts);
+ opts->mnt_opts = NULL;
+ kfree(opts->mnt_opts_flags);
+ opts->mnt_opts_flags = NULL;
+ opts->num_mnt_opts = 0;
+}
+
/**
* struct security_operations - main security structure
*
* @sb_get_mnt_opts:
* Get the security relevant mount options used for a superblock
* @sb the superblock to get security mount options from
- * @mount_options array for pointers to mount options
- * @mount_flags array of ints specifying what each mount options is
- * @num_opts number of options in the arrays
+ * @opts binary data structure containing all lsm mount data
* @sb_set_mnt_opts:
* Set the security relevant mount options used for a superblock
* @sb the superblock to set security mount options for
- * @mount_options array for pointers to mount options
- * @mount_flags array of ints specifying what each mount options is
- * @num_opts number of options in the arrays
+ * @opts binary data structure containing all lsm mount data
* @sb_clone_mnt_opts:
* Copy all security options from a given superblock to another
* @oldsb old superblock which contain information to clone
* @newsb new superblock which needs filled in
+ * @sb_parse_opts_str:
+ * Parse a string of security data filling in the opts structure
+ * @options string containing all mount options known by the LSM
+ * @opts binary data structure usable by the LSM
*
* Security hooks for inode operations.
*
int (*sb_alloc_security) (struct super_block * sb);
void (*sb_free_security) (struct super_block * sb);
- int (*sb_copy_data)(struct file_system_type *type,
- void *orig, void *copy);
+ int (*sb_copy_data)(char *orig, char *copy);
int (*sb_kern_mount) (struct super_block *sb, void *data);
int (*sb_statfs) (struct dentry *dentry);
int (*sb_mount) (char *dev_name, struct nameidata * nd,
void (*sb_post_pivotroot) (struct nameidata * old_nd,
struct nameidata * new_nd);
int (*sb_get_mnt_opts) (const struct super_block *sb,
- char ***mount_options, int **flags,
- int *num_opts);
- int (*sb_set_mnt_opts) (struct super_block *sb, char **mount_options,
- int *flags, int num_opts);
+ struct security_mnt_opts *opts);
+ int (*sb_set_mnt_opts) (struct super_block *sb,
+ struct security_mnt_opts *opts);
void (*sb_clone_mnt_opts) (const struct super_block *oldsb,
struct super_block *newsb);
+ int (*sb_parse_opts_str) (char *options, struct security_mnt_opts *opts);
int (*inode_alloc_security) (struct inode *inode);
void (*inode_free_security) (struct inode *inode);
int security_bprm_secureexec(struct linux_binprm *bprm);
int security_sb_alloc(struct super_block *sb);
void security_sb_free(struct super_block *sb);
-int security_sb_copy_data(struct file_system_type *type, void *orig, void *copy);
+int security_sb_copy_data(char *orig, char *copy);
int security_sb_kern_mount(struct super_block *sb, void *data);
int security_sb_statfs(struct dentry *dentry);
int security_sb_mount(char *dev_name, struct nameidata *nd,
void security_sb_post_addmount(struct vfsmount *mnt, struct nameidata *mountpoint_nd);
int security_sb_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd);
void security_sb_post_pivotroot(struct nameidata *old_nd, struct nameidata *new_nd);
-int security_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options,
- int **flags, int *num_opts);
-int security_sb_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts);
+int security_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts);
+int security_sb_set_mnt_opts(struct super_block *sb, struct security_mnt_opts *opts);
void security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb);
+int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts);
int security_inode_alloc(struct inode *inode);
void security_inode_free(struct inode *inode);
void security_release_secctx(char *secdata, u32 seclen);
#else /* CONFIG_SECURITY */
+struct security_mnt_opts {
+};
+
+static inline void security_init_mnt_opts(struct security_mnt_opts *opts)
+{
+}
+
+static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
+{
+}
/*
* This is the default capabilities functionality. Most of these functions
static inline void security_sb_free (struct super_block *sb)
{ }
-static inline int security_sb_copy_data (struct file_system_type *type,
- void *orig, void *copy)
+static inline int security_sb_copy_data (char *orig, char *copy)
{
return 0;
}
static inline void security_sb_post_pivotroot (struct nameidata *old_nd,
struct nameidata *new_nd)
{ }
+static inline int security_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts)
+{
+ security_init_mnt_opts(opts);
+ return 0;
+}
+
+static inline int security_sb_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
+{
+ return 0;
+}
+
+static inline void security_sb_clone_mnt_opts(const struct super_block *oldsb,
+ struct super_block *newsb)
+{ }
+
+static inline int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return 0;
+}
static inline int security_inode_alloc (struct inode *inode)
{
goto found; \
else \
i++;
-#include "kmalloc_sizes.h"
+#include <linux/kmalloc_sizes.h>
#undef CACHE
{
extern void __you_cannot_kmalloc_that_much(void);
goto found; \
else \
i++;
-#include "kmalloc_sizes.h"
+#include <linux/kmalloc_sizes.h>
#undef CACHE
{
extern void __you_cannot_kmalloc_that_much(void);
#define TIFM_FIFO_ENABLE 0x00000001
#define TIFM_FIFO_READY 0x00000001
+#define TIFM_FIFO_MORE 0x00000008
#define TIFM_FIFO_INT_SETALL 0x0000ffff
#define TIFM_FIFO_INTMASK 0x00000005
-#define TIFM_FIFO_SIZE 0x00000200
#define TIFM_DMA_RESET 0x00000002
#define TIFM_DMA_TX 0x00008000
{
ns += a->tv_nsec;
while(unlikely(ns >= NSEC_PER_SEC)) {
+ /* The following asm() prevents the compiler from
+ * optimising this loop into a modulo operation. */
+ asm("" : "+r"(ns));
+
ns -= NSEC_PER_SEC;
a->tv_sec++;
}
#else
#define NTP_INTERVAL_FREQ (HZ)
#endif
-
-#define CLOCK_TICK_OVERFLOW (LATCH * HZ - CLOCK_TICK_RATE)
-#define CLOCK_TICK_ADJUST (((s64)CLOCK_TICK_OVERFLOW * NSEC_PER_SEC) / \
- (s64)CLOCK_TICK_RATE)
-
-/* Because using NSEC_PER_SEC would be too easy */
-#define NTP_INTERVAL_LENGTH ((((s64)TICK_USEC * NSEC_PER_USEC * USER_HZ) + \
- CLOCK_TICK_ADJUST) / NTP_INTERVAL_FREQ)
+#define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
/* Returns how long ticks are at present, in ns / 2^(SHIFT_SCALE-10). */
extern u64 current_tick_length(void);
header-y += ch9.h
header-y += gadgetfs.h
header-y += midi.h
-unifdef-y += g_printer.h
+header-y += g_printer.h
#ifndef __LINUX_USB_GADGET_H
#define __LINUX_USB_GADGET_H
-#ifdef __KERNEL__
-
struct usb_ep;
/**
extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit;
-#endif /* __KERNEL__ */
-
#endif /* __LINUX_USB_GADGET_H */
int bt_err(__u16 code);
extern int hci_sock_init(void);
-extern int hci_sock_cleanup(void);
+extern void hci_sock_cleanup(void);
extern int bt_sysfs_init(void);
extern void bt_sysfs_cleanup(void);
void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow);
struct tsap_cb *irttp_dup(struct tsap_cb *self, void *instance);
-static __inline __u32 irttp_get_saddr(struct tsap_cb *self)
+static inline __u32 irttp_get_saddr(struct tsap_cb *self)
{
return irlmp_get_saddr(self->lsap);
}
-static __inline __u32 irttp_get_daddr(struct tsap_cb *self)
+static inline __u32 irttp_get_daddr(struct tsap_cb *self)
{
return irlmp_get_daddr(self->lsap);
}
-static __inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
+static inline __u32 irttp_get_max_seg_size(struct tsap_cb *self)
{
return self->max_seg_size;
}
struct proc_dir_entry *proc_net;
struct proc_dir_entry *proc_net_stat;
- struct proc_dir_entry *proc_net_root;
struct list_head sysctl_table_headers;
struct nf_ct_ext {
u8 offset[NF_CT_EXT_NUM];
u8 len;
- u8 real_len;
char data[0];
};
extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
struct ssp_response_iu *iu);
+struct sas_phy *sas_find_local_phy(struct domain_device *dev);
#endif /* _SASLIB_H_ */
struct list_head host_list;
struct iscsi_transport *transport;
spinlock_t lock;
+ struct work_struct block_work;
+ struct work_struct unblock_work;
struct work_struct scan_work;
struct work_struct unbind_work;
config PREEMPT_NOTIFIERS
bool
-choice
- prompt "RCU implementation type:"
- default CLASSIC_RCU
- help
- This allows you to choose either the classic RCU implementation
- that is designed for best read-side performance on non-realtime
- systems, or the preemptible RCU implementation for best latency
- on realtime systems. Note that some kernel preemption modes
- will restrict your choice.
-
- Select the default if you are unsure.
-
config CLASSIC_RCU
- bool "Classic RCU"
+ def_bool !PREEMPT_RCU
help
This option selects the classic RCU implementation that is
designed for best read-side performance on non-realtime
- systems.
-
- Say Y if you are unsure.
-
-config PREEMPT_RCU
- bool "Preemptible RCU"
- depends on PREEMPT
- help
- This option reduces the latency of the kernel by making certain
- RCU sections preemptible. Normally RCU code is non-preemptible, if
- this option is selected then read-only RCU sections become
- preemptible. This helps latency, but may expose bugs due to
- now-naive assumptions about each RCU read-side critical section
- remaining on a given CPU through its execution.
-
- Say N if you are unsure.
-
-endchoice
+ systems. Classic RCU is the default. Note that the
+ PREEMPT_RCU symbol is used to select/deselect this option.
if (sfd->vm_ops->get_policy)
pol = sfd->vm_ops->get_policy(vma, addr);
- else if (vma->vm_policy)
+ else if (vma->vm_policy) {
pol = vma->vm_policy;
- else
+ mpol_get(pol); /* get_vma_policy() expects this */
+ } else
pol = current->mempolicy;
return pol;
}
endchoice
+config PREEMPT_RCU
+ bool "Preemptible RCU"
+ depends on PREEMPT
+ default n
+ help
+ This option reduces the latency of the kernel by making certain
+ RCU sections preemptible. Normally RCU code is non-preemptible, if
+ this option is selected then read-only RCU sections become
+ preemptible. This helps latency, but may expose bugs due to
+ now-naive assumptions about each RCU read-side critical section
+ remaining on a given CPU through its execution.
+
+ Say N if you are unsure.
+
config RCU_TRACE
bool "Enable tracing for RCU - currently stats in debugfs"
+ depends on PREEMPT_RCU
select DEBUG_FS
default y
help
* Call without callback_mutex or task_lock() held. May be
* called with or without cgroup_mutex held. Thanks in part to
* 'the_top_cpuset_hack', the task's cpuset pointer will never
- * be NULL. This routine also might acquire callback_mutex and
- * current->mm->mmap_sem during call.
+ * be NULL. This routine also might acquire callback_mutex during
+ * call.
*
* Reading current->cpuset->mems_generation doesn't need task_lock
* to guard the current->cpuset derefence, because it is guarded
if (!retval && infop)
retval = put_user(0, &infop->si_errno);
if (!retval && infop)
- retval = put_user(why, &infop->si_code);
+ retval = put_user((short)why, &infop->si_code);
if (!retval && infop)
retval = put_user(exit_code, &infop->si_status);
if (!retval && infop)
wake_up(&module_wq);
return ret;
}
+ if (ret > 0) {
+ printk(KERN_WARNING "%s: '%s'->init suspiciously returned %d, "
+ "it should follow 0/-E convention\n"
+ KERN_WARNING "%s: loading module anyway...\n",
+ __func__, mod->name, ret,
+ __func__);
+ dump_stack();
+ }
- /* Now it's a first class citizen! */
- mutex_lock(&module_mutex);
+ /* Now it's a first class citizen! Wake up anyone waiting for it. */
mod->state = MODULE_STATE_LIVE;
+ wake_up(&module_wq);
+
+ mutex_lock(&module_mutex);
/* Drop initial reference. */
module_put(mod);
unwind_remove_table(mod->unwind_info, 1);
mod->init_size = 0;
mod->init_text_size = 0;
mutex_unlock(&module_mutex);
- wake_up(&module_wq);
return 0;
}
{
return TASK_NICE(p);
}
-EXPORT_SYMBOL_GPL(task_nice);
+EXPORT_SYMBOL(task_nice);
/**
* idle_cpu - is a given cpu idle currently?
time_slice = 0;
if (p->policy == SCHED_RR) {
time_slice = DEF_TIMESLICE;
- } else {
+ } else if (p->policy != SCHED_FIFO) {
struct sched_entity *se = &p->se;
unsigned long flags;
struct rq *rq;
spin_unlock_irq(&rq->lock);
break;
- case CPU_DOWN_PREPARE:
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
/* Update our root-domain */
rq = cpu_rq(cpu);
spin_lock_irqsave(&rq->lock, flags);
set_task_rq(tsk, task_cpu(tsk));
+#ifdef CONFIG_FAIR_GROUP_SCHED
+ if (tsk->sched_class->moved_group)
+ tsk->sched_class->moved_group(tsk);
+#endif
+
if (on_rq) {
if (unlikely(running))
tsk->sched_class->set_curr_task(rq);
if (runtime == RUNTIME_INF)
return 1ULL << 16;
- runtime *= (1ULL << 16);
- div64_64(runtime, period);
- return runtime;
+ return div64_64(runtime << 16, period);
}
static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime)
return total + to_ratio(period, runtime) < global_ratio;
}
+/* Must be called with tasklist_lock held */
+static inline int tg_has_rt_tasks(struct task_group *tg)
+{
+ struct task_struct *g, *p;
+ do_each_thread(g, p) {
+ if (rt_task(p) && rt_rq_of_se(&p->rt)->tg == tg)
+ return 1;
+ } while_each_thread(g, p);
+ return 0;
+}
+
int sched_group_set_rt_runtime(struct task_group *tg, long rt_runtime_us)
{
u64 rt_runtime, rt_period;
int err = 0;
- rt_period = sysctl_sched_rt_period * NSEC_PER_USEC;
+ rt_period = (u64)sysctl_sched_rt_period * NSEC_PER_USEC;
rt_runtime = (u64)rt_runtime_us * NSEC_PER_USEC;
if (rt_runtime_us == -1)
- rt_runtime = rt_period;
+ rt_runtime = RUNTIME_INF;
mutex_lock(&rt_constraints_mutex);
+ read_lock(&tasklist_lock);
+ if (rt_runtime_us == 0 && tg_has_rt_tasks(tg)) {
+ err = -EBUSY;
+ goto unlock;
+ }
if (!__rt_schedulable(tg, rt_period, rt_runtime)) {
err = -EINVAL;
goto unlock;
}
- if (rt_runtime_us == -1)
- rt_runtime = RUNTIME_INF;
tg->rt_runtime = rt_runtime;
unlock:
+ read_unlock(&tasklist_lock);
mutex_unlock(&rt_constraints_mutex);
return err;
set_next_entity(cfs_rq_of(se), se);
}
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static void moved_group_fair(struct task_struct *p)
+{
+ struct cfs_rq *cfs_rq = task_cfs_rq(p);
+
+ update_curr(cfs_rq);
+ place_entity(cfs_rq, &p->se, 1);
+}
+#endif
+
/*
* All the scheduling class methods:
*/
.prio_changed = prio_changed_fair,
.switched_to = switched_to_fair,
+
+#ifdef CONFIG_FAIR_GROUP_SCHED
+ .moved_group = moved_group_fair,
+#endif
};
#ifdef CONFIG_SCHED_DEBUG
pull_rt_task(rq);
/*
* If there's a higher priority task waiting to run
- * then reschedule.
+ * then reschedule. Note, the above pull_rt_task
+ * can release the rq lock and p could migrate.
+ * Only reschedule if p is still on the same runqueue.
*/
- if (p->prio > rq->rt.highest_prio)
+ if (p->prio > rq->rt.highest_prio && rq->curr == p)
resched_task(p);
#else
/* For UP simply resched on drop of prio */
long time_freq; /* frequency offset (scaled ppm)*/
static long time_reftime; /* time at last adjustment (s) */
long time_adjust;
+static long ntp_tick_adj;
static void ntp_update_frequency(void)
{
u64 second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ)
<< TICK_LENGTH_SHIFT;
- second_length += (s64)CLOCK_TICK_ADJUST << TICK_LENGTH_SHIFT;
+ second_length += (s64)ntp_tick_adj << TICK_LENGTH_SHIFT;
second_length += (s64)time_freq << (TICK_LENGTH_SHIFT - SHIFT_NSEC);
tick_length_base = second_length;
freq_adj = shift_right(freq_adj, time_constant * 2 +
(SHIFT_PLL + 2) * 2 - SHIFT_NSEC);
if (mtemp >= MINSEC && (time_status & STA_FLL || mtemp > MAXSEC)) {
+ u64 utemp64;
temp64 = time_offset << (SHIFT_NSEC - SHIFT_FLL);
if (time_offset < 0) {
- temp64 = -temp64;
- do_div(temp64, mtemp);
- freq_adj -= temp64;
+ utemp64 = -temp64;
+ do_div(utemp64, mtemp);
+ freq_adj -= utemp64;
} else {
- do_div(temp64, mtemp);
- freq_adj += temp64;
+ utemp64 = temp64;
+ do_div(utemp64, mtemp);
+ freq_adj += utemp64;
}
}
freq_adj += time_freq;
notify_cmos_timer();
return(result);
}
+
+static int __init ntp_tick_adj_setup(char *str)
+{
+ ntp_tick_adj = simple_strtol(str, NULL, 0);
+ return 1;
+}
+
+__setup("ntp_tick_adj=", ntp_tick_adj_setup);
if (ts->sched_timer.base)
hrtimer_cancel(&ts->sched_timer);
- ts->tick_stopped = 0;
+
ts->nohz_mode = NOHZ_MODE_INACTIVE;
}
#endif /* HIGH_RES_TIMERS */
clock->error = 0;
clock->xtime_nsec = 0;
- clocksource_calculate_interval(clock,
- (unsigned long)(current_tick_length()>>TICK_LENGTH_SHIFT));
+ clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
tick_clock_notify();
ntp_clear();
clock = clocksource_get_next();
- clocksource_calculate_interval(clock,
- (unsigned long)(current_tick_length()>>TICK_LENGTH_SHIFT));
+ clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
clock->cycle_last = clocksource_read(clock);
xtime.tv_sec = sec;
#include <linux/backing-dev.h>
#include <linux/pagevec.h>
#include <linux/blkdev.h>
-#include <linux/backing-dev.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/cpuset.h>
}
EXPORT_SYMBOL(iov_iter_copy_from_user);
-static void __iov_iter_advance_iov(struct iov_iter *i, size_t bytes)
+void iov_iter_advance(struct iov_iter *i, size_t bytes)
{
+ BUG_ON(i->count < bytes);
+
if (likely(i->nr_segs == 1)) {
i->iov_offset += bytes;
+ i->count -= bytes;
} else {
const struct iovec *iov = i->iov;
size_t base = i->iov_offset;
/*
* The !iov->iov_len check ensures we skip over unlikely
- * zero-length segments.
+ * zero-length segments (without overruning the iovec).
*/
- while (bytes || !iov->iov_len) {
- int copy = min(bytes, iov->iov_len - base);
+ while (bytes || unlikely(!iov->iov_len && i->count)) {
+ int copy;
+ copy = min(bytes, iov->iov_len - base);
+ BUG_ON(!i->count || i->count < copy);
+ i->count -= copy;
bytes -= copy;
base += copy;
if (iov->iov_len == base) {
i->iov_offset = base;
}
}
-
-void iov_iter_advance(struct iov_iter *i, size_t bytes)
-{
- BUG_ON(i->count < bytes);
-
- __iov_iter_advance_iov(i, bytes);
- i->count -= bytes;
-}
EXPORT_SYMBOL(iov_iter_advance);
/*
spin_lock(&hugetlb_lock);
if (page) {
+ /*
+ * This page is now managed by the hugetlb allocator and has
+ * no users -- drop the buddy allocator's reference.
+ */
+ put_page_testzero(page);
+ VM_BUG_ON(page_count(page));
nid = page_to_nid(page);
set_compound_page_dtor(page, free_huge_page);
/*
enqueue_huge_page(page);
else {
/*
- * Decrement the refcount and free the page using its
- * destructor. This must be done with hugetlb_lock
+ * The page has a reference count of zero already, so
+ * call free_huge_page directly instead of using
+ * put_page. This must be done with hugetlb_lock
* unlocked which is safe because free_huge_page takes
* hugetlb_lock before deciding how to free the page.
*/
spin_unlock(&hugetlb_lock);
- put_page(page);
+ free_huge_page(page);
spin_lock(&hugetlb_lock);
}
}
unsigned nid;
nid = interleave_nid(pol, vma, addr, HPAGE_SHIFT);
- __mpol_free(pol); /* finished with pol */
+ if (unlikely(pol != &default_policy &&
+ pol != current->mempolicy))
+ __mpol_free(pol); /* finished with pol */
return NODE_DATA(nid)->node_zonelists + gfp_zone(gfp_flags);
}
unsigned nid;
nid = interleave_nid(pol, vma, addr, PAGE_SHIFT);
+ if (unlikely(pol != &default_policy &&
+ pol != current->mempolicy))
+ __mpol_free(pol); /* finished with pol */
return alloc_page_interleave(gfp, 0, nid);
}
zl = zonelist_policy(gfp, pol);
return i; \
else \
i++;
-#include "linux/kmalloc_sizes.h"
+#include <linux/kmalloc_sizes.h>
#undef CACHE
__bad_size();
} else
struct array_cache *ac;
int node;
- node = numa_node_id();
-
+retry:
check_irq_off();
+ node = numa_node_id();
ac = cpu_cache_get(cachep);
-retry:
batchcount = ac->batchcount;
if (!ac->touched && batchcount > BATCHREFILL_LIMIT) {
/*
if (local_flags & __GFP_WAIT)
local_irq_enable();
kmem_flagcheck(cache, flags);
- obj = kmem_getpages(cache, flags, -1);
+ obj = kmem_getpages(cache, local_flags, -1);
if (local_flags & __GFP_WAIT)
local_irq_disable();
if (obj) {
struct page *page = c->page;
int tail = 1;
- if (c->freelist)
+ if (page->freelist)
stat(c, DEACTIVATE_REMOTE_FREES);
/*
* Merge cpu freelist into slab freelist. Typically we get here
* The hardware cache alignment cannot override the specified
* alignment though. If that is greater then use it.
*/
- if ((flags & SLAB_HWCACHE_ALIGN) &&
- size > cache_line_size() / 2)
- return max_t(unsigned long, align, cache_line_size());
+ if (flags & SLAB_HWCACHE_ALIGN) {
+ unsigned long ralign = cache_line_size();
+ while (size <= ralign / 2)
+ ralign /= 2;
+ align = max(align, ralign);
+ }
if (align < ARCH_SLAB_MINALIGN)
- return ARCH_SLAB_MINALIGN;
+ align = ARCH_SLAB_MINALIGN;
return ALIGN(align, sizeof(void *));
}
void bnep_net_setup(struct net_device *dev);
int bnep_sock_init(void);
-int bnep_sock_cleanup(void);
+void bnep_sock_cleanup(void);
static inline int bnep_mc_hash(__u8 *addr)
{
return err;
}
-int __exit bnep_sock_cleanup(void)
+void __exit bnep_sock_cleanup(void)
{
if (bt_sock_unregister(BTPROTO_BNEP) < 0)
BT_ERR("Can't unregister BNEP socket");
proto_unregister(&bnep_proto);
-
- return 0;
}
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
- hci_unregister_sysfs(hdev);
-
write_lock_bh(&hci_dev_list_lock);
list_del(&hdev->list);
write_unlock_bh(&hci_dev_list_lock);
hci_notify(hdev, HCI_DEV_UNREG);
+ hci_unregister_sysfs(hdev);
+
__hci_dev_put(hdev);
return 0;
return err;
}
-int __exit hci_sock_cleanup(void)
+void __exit hci_sock_cleanup(void)
{
if (bt_sock_unregister(BTPROTO_HCI) < 0)
BT_ERR("HCI socket unregistration failed");
hci_unregister_notifier(&hci_sock_nblock);
proto_unregister(&hci_sk_proto);
-
- return 0;
}
* introducing MSS oddities to segment boundaries. In rare cases where
* mss_now != mss_cache, we will request caller to create a small skb
* per input skb which could be mostly avoided here (if desired).
+ *
+ * We explicitly want to create a request for splitting write queue tail
+ * to a small skb for Nagle purposes while avoiding unnecessary modulos,
+ * thus all the complexity (cwnd_len is always MSS multiple which we
+ * return whenever allowed by the other factors). Basically we need the
+ * modulo only when the receiver window alone is the limiting factor or
+ * when we would be allowed to send the split-due-to-Nagle skb fully.
*/
static unsigned int tcp_mss_split_point(struct sock *sk, struct sk_buff *skb,
unsigned int mss_now, unsigned int cwnd)
if (likely(cwnd_len <= window && skb != tcp_write_queue_tail(sk)))
return cwnd_len;
- if (skb == tcp_write_queue_tail(sk) && cwnd_len <= skb->len)
+ needed = min(skb->len, window);
+
+ if (skb == tcp_write_queue_tail(sk) && cwnd_len <= needed)
return cwnd_len;
- needed = min(skb->len, window);
return needed - needed % mss_now;
}
if (nf_ct_expect_count >= nf_ct_expect_max) {
if (net_ratelimit())
printk(KERN_WARNING
- "nf_conntrack: expectation table full");
+ "nf_conntrack: expectation table full\n");
ret = -EMFILE;
goto out;
}
static struct nf_ct_ext_type *nf_ct_ext_types[NF_CT_EXT_NUM];
static DEFINE_MUTEX(nf_ct_ext_type_mutex);
-/* Horrible trick to figure out smallest amount worth kmallocing. */
-#define CACHE(x) (x) + 0 *
-enum {
- NF_CT_EXT_MIN_SIZE =
-#include <linux/kmalloc_sizes.h>
- 1 };
-#undef CACHE
-
void __nf_ct_ext_destroy(struct nf_conn *ct)
{
unsigned int i;
static void *
nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp)
{
- unsigned int off, len, real_len;
+ unsigned int off, len;
struct nf_ct_ext_type *t;
rcu_read_lock();
BUG_ON(t == NULL);
off = ALIGN(sizeof(struct nf_ct_ext), t->align);
len = off + t->len;
- real_len = t->alloc_size;
rcu_read_unlock();
- *ext = kzalloc(real_len, gfp);
+ *ext = kzalloc(t->alloc_size, gfp);
if (!*ext)
return NULL;
(*ext)->offset[id] = off;
(*ext)->len = len;
- (*ext)->real_len = real_len;
return (void *)(*ext) + off;
}
newlen = newoff + t->len;
rcu_read_unlock();
- if (newlen >= ct->ext->real_len) {
+ if (newlen >= ksize(ct->ext)) {
new = kmalloc(newlen, gfp);
if (!new)
return NULL;
rcu_read_unlock();
}
kfree(ct->ext);
- new->real_len = newlen;
ct->ext = new;
}
t1->alloc_size = ALIGN(t1->alloc_size, t2->align)
+ t2->len;
}
- if (t1->alloc_size < NF_CT_EXT_MIN_SIZE)
- t1->alloc_size = NF_CT_EXT_MIN_SIZE;
}
}
return -EINVAL;
mutex_lock(&queue_handler_mutex);
- if (queue_handler[pf] != qh) {
+ if (queue_handler[pf] && queue_handler[pf] != qh) {
mutex_unlock(&queue_handler_mutex);
return -EINVAL;
}
/* FIXME: do we want to make the size calculation conditional based on
* what is actually present? way more branches and checks, but more
* memory efficient... */
- size = NLMSG_ALIGN(sizeof(struct nfgenmsg))
+ size = NLMSG_SPACE(sizeof(struct nfgenmsg))
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hdr))
+ nla_total_size(sizeof(u_int32_t)) /* ifindex */
+ nla_total_size(sizeof(u_int32_t)) /* ifindex */
struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
u_int16_t group_num = ntohs(nfmsg->res_id);
struct nfulnl_instance *inst;
+ struct nfulnl_msg_config_cmd *cmd = NULL;
int ret = 0;
+ if (nfula[NFULA_CFG_CMD]) {
+ u_int8_t pf = nfmsg->nfgen_family;
+ cmd = nla_data(nfula[NFULA_CFG_CMD]);
+
+ /* Commands without queue context */
+ switch (cmd->command) {
+ case NFULNL_CFG_CMD_PF_BIND:
+ return nf_log_register(pf, &nfulnl_logger);
+ case NFULNL_CFG_CMD_PF_UNBIND:
+ nf_log_unregister_pf(pf);
+ return 0;
+ }
+ }
+
inst = instance_lookup_get(group_num);
if (inst && inst->peer_pid != NETLINK_CB(skb).pid) {
ret = -EPERM;
goto out_put;
}
- if (nfula[NFULA_CFG_CMD]) {
- u_int8_t pf = nfmsg->nfgen_family;
- struct nfulnl_msg_config_cmd *cmd;
-
- cmd = nla_data(nfula[NFULA_CFG_CMD]);
-
+ if (cmd != NULL) {
switch (cmd->command) {
case NFULNL_CFG_CMD_BIND:
if (inst) {
instance_destroy(inst);
goto out;
- case NFULNL_CFG_CMD_PF_BIND:
- ret = nf_log_register(pf, &nfulnl_logger);
- break;
- case NFULNL_CFG_CMD_PF_UNBIND:
- /* This is a bug and a feature. We cannot unregister
- * other handlers, like nfnetlink_inst can */
- nf_log_unregister_pf(pf);
- break;
default:
ret = -ENOTSUPP;
break;
struct net_device *indev;
struct net_device *outdev;
- size = NLMSG_ALIGN(sizeof(struct nfgenmsg))
+ size = NLMSG_SPACE(sizeof(struct nfgenmsg))
+ nla_total_size(sizeof(struct nfqnl_msg_packet_hdr))
+ nla_total_size(sizeof(u_int32_t)) /* ifindex */
+ nla_total_size(sizeof(u_int32_t)) /* ifindex */
/* Commands without queue context - might sleep */
switch (cmd->command) {
case NFQNL_CFG_CMD_PF_BIND:
- ret = nf_register_queue_handler(ntohs(cmd->pf),
- &nfqh);
- break;
+ return nf_register_queue_handler(ntohs(cmd->pf),
+ &nfqh);
case NFQNL_CFG_CMD_PF_UNBIND:
- ret = nf_unregister_queue_handler(ntohs(cmd->pf),
- &nfqh);
- break;
- default:
- break;
+ return nf_unregister_queue_handler(ntohs(cmd->pf),
+ &nfqh);
}
-
- if (ret < 0)
- return ret;
}
rcu_read_lock();
*/
r->dse = time / 86400;
- /* 1970-01-01 (w=0) was a Thursday (4). */
- r->weekday = (4 + r->dse) % 7;
+ /*
+ * 1970-01-01 (w=0) was a Thursday (4).
+ * -1 and +1 map Sunday properly onto 7.
+ */
+ r->weekday = (4 + r->dse - 1) % 7 + 1;
}
static void localtime_3(struct xtm *r, time_t time)
/* copy the peer address and timestamp */
if (!continue_call) {
if (msg->msg_name && msg->msg_namelen > 0)
- memcpy(&msg->msg_name, &call->conn->trans->peer->srx,
+ memcpy(msg->msg_name,
+ &call->conn->trans->peer->srx,
sizeof(call->conn->trans->peer->srx));
sock_recv_timestamp(msg, &rx->sk, skb);
}
int sctp_del_bind_addr(struct sctp_bind_addr *bp, union sctp_addr *del_addr)
{
struct sctp_sockaddr_entry *addr, *temp;
+ int found = 0;
/* We hold the socket lock when calling this function,
* and that acts as a writer synchronizing lock.
list_for_each_entry_safe(addr, temp, &bp->address_list, list) {
if (sctp_cmp_addr_exact(&addr->a, del_addr)) {
/* Found the exact match. */
+ found = 1;
addr->valid = 0;
list_del_rcu(&addr->list);
break;
}
}
- if (addr && !addr->valid) {
+ if (found) {
call_rcu(&addr->rcu, sctp_local_addr_free);
SCTP_DBG_OBJCNT_DEC(addr);
return 0;
struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)ptr;
struct sctp_sockaddr_entry *addr = NULL;
struct sctp_sockaddr_entry *temp;
+ int found = 0;
switch (ev) {
case NETDEV_UP:
&sctp_local_addr_list, list) {
if (ipv6_addr_equal(&addr->a.v6.sin6_addr,
&ifa->addr)) {
+ found = 1;
addr->valid = 0;
list_del_rcu(&addr->list);
break;
}
}
spin_unlock_bh(&sctp_local_addr_lock);
- if (addr && !addr->valid)
+ if (found)
call_rcu(&addr->rcu, sctp_local_addr_free);
break;
}
struct in_ifaddr *ifa = (struct in_ifaddr *)ptr;
struct sctp_sockaddr_entry *addr = NULL;
struct sctp_sockaddr_entry *temp;
+ int found = 0;
switch (ev) {
case NETDEV_UP:
list_for_each_entry_safe(addr, temp,
&sctp_local_addr_list, list) {
if (addr->a.v4.sin_addr.s_addr == ifa->ifa_local) {
+ found = 1;
addr->valid = 0;
list_del_rcu(&addr->list);
break;
}
}
spin_unlock_bh(&sctp_local_addr_lock);
- if (addr && !addr->valid)
+ if (found)
call_rcu(&addr->rcu, sctp_local_addr_free);
break;
}
asoc->peer.ipv4_address = 0;
asoc->peer.ipv6_address = 0;
+ /* Assume that peer supports the address family
+ * by which it sends a packet.
+ */
+ if (peer_addr->sa.sa_family == AF_INET6)
+ asoc->peer.ipv6_address = 1;
+ else if (peer_addr->sa.sa_family == AF_INET)
+ asoc->peer.ipv4_address = 1;
+
/* Cycle through address types; avoid divide by 0. */
sat = ntohs(param.p->length) - sizeof(sctp_paramhdr_t);
if (sat)
char __user *optval,
int optlen)
{
+ struct sctp_assoc_value params;
+ struct sctp_sock *sp;
+ struct sctp_association *asoc;
int val;
+ int assoc_id = 0;
- if (optlen != sizeof(int))
+ if (optlen < sizeof(int))
return -EINVAL;
- if (get_user(val, (int __user *)optval))
- return -EFAULT;
- if (val < 0)
+ if (optlen == sizeof(int)) {
+ printk(KERN_WARNING
+ "SCTP: Use of int in max_burst socket option deprecated\n");
+ printk(KERN_WARNING
+ "SCTP: Use struct sctp_assoc_value instead\n");
+ if (copy_from_user(&val, optval, optlen))
+ return -EFAULT;
+ } else if (optlen == sizeof(struct sctp_assoc_value)) {
+ if (copy_from_user(¶ms, optval, optlen))
+ return -EFAULT;
+ val = params.assoc_value;
+ assoc_id = params.assoc_id;
+ } else
return -EINVAL;
- sctp_sk(sk)->max_burst = val;
+ sp = sctp_sk(sk);
+
+ if (assoc_id != 0) {
+ asoc = sctp_id2assoc(sk, assoc_id);
+ if (!asoc)
+ return -EINVAL;
+ asoc->max_burst = val;
+ } else
+ sp->max_burst = val;
return 0;
}
char __user *optval,
int __user *optlen)
{
- int val;
+ struct sctp_assoc_value params;
+ struct sctp_sock *sp;
+ struct sctp_association *asoc;
if (len < sizeof(int))
return -EINVAL;
- len = sizeof(int);
+ if (len == sizeof(int)) {
+ printk(KERN_WARNING
+ "SCTP: Use of int in max_burst socket option deprecated\n");
+ printk(KERN_WARNING
+ "SCTP: Use struct sctp_assoc_value instead\n");
+ params.assoc_id = 0;
+ } else if (len == sizeof (struct sctp_assoc_value)) {
+ if (copy_from_user(¶ms, optval, len))
+ return -EFAULT;
+ } else
+ return -EINVAL;
- val = sctp_sk(sk)->max_burst;
- if (put_user(len, optlen))
- return -EFAULT;
- if (copy_to_user(optval, &val, len))
- return -EFAULT;
+ sp = sctp_sk(sk);
+
+ if (params.assoc_id != 0) {
+ asoc = sctp_id2assoc(sk, params.assoc_id);
+ if (!asoc)
+ return -EINVAL;
+ params.assoc_value = asoc->max_burst;
+ } else
+ params.assoc_value = sp->max_burst;
+
+ if (len == sizeof(int)) {
+ if (copy_to_user(optval, ¶ms.assoc_value, len))
+ return -EFAULT;
+ } else {
+ if (copy_to_user(optval, ¶ms, len))
+ return -EFAULT;
+ }
+
+ return 0;
- return -ENOTSUPP;
}
static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
struct svc_rdma_op_ctxt *ctxt;
int ret = 0;
- BUG_ON(sge_count >= 32);
+ BUG_ON(sge_count > RPCSVC_MAXPAGES);
dprintk("svcrdma: RDMA_WRITE rmr=%x, to=%llx, xdr_off=%d, "
"write_len=%d, xdr_sge=%p, sge_count=%d\n",
rmr, (unsigned long long)to, xdr_off,
int flags);
static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt);
static void svc_rdma_release_rqst(struct svc_rqst *);
-static void rdma_destroy_xprt(struct svcxprt_rdma *xprt);
static void dto_tasklet_func(unsigned long data);
static void svc_rdma_detach(struct svc_xprt *xprt);
static void svc_rdma_free(struct svc_xprt *xprt);
sq_cq_reap(xprt);
}
+ svc_xprt_put(&xprt->sc_xprt);
spin_lock_irqsave(&dto_lock, flags);
}
spin_unlock_irqrestore(&dto_lock, flags);
* add it
*/
spin_lock_irqsave(&dto_lock, flags);
- if (list_empty(&xprt->sc_dto_q))
+ if (list_empty(&xprt->sc_dto_q)) {
+ svc_xprt_get(&xprt->sc_xprt);
list_add_tail(&xprt->sc_dto_q, &dto_xprt_q);
+ }
spin_unlock_irqrestore(&dto_lock, flags);
/* Tasklet does all the work to avoid irqsave locks. */
* add it
*/
spin_lock_irqsave(&dto_lock, flags);
- if (list_empty(&xprt->sc_dto_q))
+ if (list_empty(&xprt->sc_dto_q)) {
+ svc_xprt_get(&xprt->sc_xprt);
list_add_tail(&xprt->sc_dto_q, &dto_xprt_q);
+ }
spin_unlock_irqrestore(&dto_lock, flags);
/* Tasklet does all the work to avoid irqsave locks. */
switch (event->event) {
case RDMA_CM_EVENT_ESTABLISHED:
/* Accept complete */
+ svc_xprt_get(xprt);
dprintk("svcrdma: Connection completed on DTO xprt=%p, "
"cm_id=%p\n", xprt, cma_id);
clear_bit(RDMAXPRT_CONN_PENDING, &rdma->sc_flags);
listen_id = rdma_create_id(rdma_listen_handler, cma_xprt, RDMA_PS_TCP);
if (IS_ERR(listen_id)) {
- rdma_destroy_xprt(cma_xprt);
+ svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_create_id failed = %ld\n",
PTR_ERR(listen_id));
return (void *)listen_id;
}
ret = rdma_bind_addr(listen_id, sa);
if (ret) {
- rdma_destroy_xprt(cma_xprt);
rdma_destroy_id(listen_id);
+ svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_bind_addr failed = %d\n", ret);
return ERR_PTR(ret);
}
ret = rdma_listen(listen_id, RPCRDMA_LISTEN_BACKLOG);
if (ret) {
rdma_destroy_id(listen_id);
- rdma_destroy_xprt(cma_xprt);
+ svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_listen failed = %d\n", ret);
+ return ERR_PTR(ret);
}
/*
newxprt->sc_sq_depth = qp_attr.cap.max_send_wr;
newxprt->sc_max_requests = qp_attr.cap.max_recv_wr;
}
+ svc_xprt_get(&newxprt->sc_xprt);
newxprt->sc_qp = newxprt->sc_cm_id->qp;
/* Register all of physical memory */
errout:
dprintk("svcrdma: failure accepting new connection rc=%d.\n", ret);
+ /* Take a reference in case the DTO handler runs */
+ svc_xprt_get(&newxprt->sc_xprt);
+ if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp)) {
+ ib_destroy_qp(newxprt->sc_qp);
+ svc_xprt_put(&newxprt->sc_xprt);
+ }
rdma_destroy_id(newxprt->sc_cm_id);
- rdma_destroy_xprt(newxprt);
+ /* This call to put will destroy the transport */
+ svc_xprt_put(&newxprt->sc_xprt);
return NULL;
}
rqstp->rq_xprt_ctxt = NULL;
}
-/* Disable data ready events for this connection */
+/*
+ * When connected, an svc_xprt has at least three references:
+ *
+ * - A reference held by the QP. We still hold that here because this
+ * code deletes the QP and puts the reference.
+ *
+ * - A reference held by the cm_id between the ESTABLISHED and
+ * DISCONNECTED events. If the remote peer disconnected first, this
+ * reference could be gone.
+ *
+ * - A reference held by the svc_recv code that called this function
+ * as part of close processing.
+ *
+ * At a minimum two references should still be held.
+ */
static void svc_rdma_detach(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
container_of(xprt, struct svcxprt_rdma, sc_xprt);
- unsigned long flags;
-
dprintk("svc: svc_rdma_detach(%p)\n", xprt);
- /*
- * Shutdown the connection. This will ensure we don't get any
- * more events from the provider.
- */
+
+ /* Disconnect and flush posted WQE */
rdma_disconnect(rdma->sc_cm_id);
- rdma_destroy_id(rdma->sc_cm_id);
- /* We may already be on the DTO list */
- spin_lock_irqsave(&dto_lock, flags);
- if (!list_empty(&rdma->sc_dto_q))
- list_del_init(&rdma->sc_dto_q);
- spin_unlock_irqrestore(&dto_lock, flags);
+ /* Destroy the QP if present (not a listener) */
+ if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) {
+ ib_destroy_qp(rdma->sc_qp);
+ svc_xprt_put(xprt);
+ }
+
+ /* Destroy the CM ID */
+ rdma_destroy_id(rdma->sc_cm_id);
}
static void svc_rdma_free(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma = (struct svcxprt_rdma *)xprt;
dprintk("svcrdma: svc_rdma_free(%p)\n", rdma);
- rdma_destroy_xprt(rdma);
- kfree(rdma);
-}
-
-static void rdma_destroy_xprt(struct svcxprt_rdma *xprt)
-{
- if (xprt->sc_qp && !IS_ERR(xprt->sc_qp))
- ib_destroy_qp(xprt->sc_qp);
-
- if (xprt->sc_sq_cq && !IS_ERR(xprt->sc_sq_cq))
- ib_destroy_cq(xprt->sc_sq_cq);
+ /* We should only be called from kref_put */
+ BUG_ON(atomic_read(&xprt->xpt_ref.refcount) != 0);
+ if (rdma->sc_sq_cq && !IS_ERR(rdma->sc_sq_cq))
+ ib_destroy_cq(rdma->sc_sq_cq);
- if (xprt->sc_rq_cq && !IS_ERR(xprt->sc_rq_cq))
- ib_destroy_cq(xprt->sc_rq_cq);
+ if (rdma->sc_rq_cq && !IS_ERR(rdma->sc_rq_cq))
+ ib_destroy_cq(rdma->sc_rq_cq);
- if (xprt->sc_phys_mr && !IS_ERR(xprt->sc_phys_mr))
- ib_dereg_mr(xprt->sc_phys_mr);
+ if (rdma->sc_phys_mr && !IS_ERR(rdma->sc_phys_mr))
+ ib_dereg_mr(rdma->sc_phys_mr);
- if (xprt->sc_pd && !IS_ERR(xprt->sc_pd))
- ib_dealloc_pd(xprt->sc_pd);
+ if (rdma->sc_pd && !IS_ERR(rdma->sc_pd))
+ ib_dealloc_pd(rdma->sc_pd);
- destroy_context_cache(xprt->sc_ctxt_head);
+ destroy_context_cache(rdma->sc_ctxt_head);
+ kfree(rdma);
}
static int svc_rdma_has_wspace(struct svc_xprt *xprt)
return;
req = container_of(buffer, struct rpcrdma_req, rl_xdr_buf[0]);
- r_xprt = container_of(req->rl_buffer, struct rpcrdma_xprt, rx_buf);
+ if (req->rl_iov.length == 0) { /* see allocate above */
+ r_xprt = container_of(((struct rpcrdma_req *) req->rl_buffer)->rl_buffer,
+ struct rpcrdma_xprt, rx_buf);
+ } else
+ r_xprt = container_of(req->rl_buffer, struct rpcrdma_xprt, rx_buf);
rep = req->rl_reply;
dprintk("RPC: %s: called on 0x%p%s\n",
return;
}
-static int dummy_sb_copy_data (struct file_system_type *type,
- void *orig, void *copy)
+static int dummy_sb_copy_data (char *orig, char *copy)
{
return 0;
}
return;
}
-static int dummy_sb_get_mnt_opts(const struct super_block *sb, char ***mount_options,
- int **flags, int *num_opts)
+static int dummy_sb_get_mnt_opts(const struct super_block *sb,
+ struct security_mnt_opts *opts)
{
- *mount_options = NULL;
- *flags = NULL;
- *num_opts = 0;
+ security_init_mnt_opts(opts);
return 0;
}
-static int dummy_sb_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts)
+static int dummy_sb_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
{
- if (unlikely(num_opts))
+ if (unlikely(opts->num_mnt_opts))
return -EOPNOTSUPP;
return 0;
}
return;
}
+static int dummy_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return 0;
+}
+
static int dummy_inode_alloc_security (struct inode *inode)
{
return 0;
set_to_dummy_if_null(ops, sb_get_mnt_opts);
set_to_dummy_if_null(ops, sb_set_mnt_opts);
set_to_dummy_if_null(ops, sb_clone_mnt_opts);
+ set_to_dummy_if_null(ops, sb_parse_opts_str);
set_to_dummy_if_null(ops, inode_alloc_security);
set_to_dummy_if_null(ops, inode_free_security);
set_to_dummy_if_null(ops, inode_init_security);
security_ops->sb_free_security(sb);
}
-int security_sb_copy_data(struct file_system_type *type, void *orig, void *copy)
+int security_sb_copy_data(char *orig, char *copy)
{
- return security_ops->sb_copy_data(type, orig, copy);
+ return security_ops->sb_copy_data(orig, copy);
}
+EXPORT_SYMBOL(security_sb_copy_data);
int security_sb_kern_mount(struct super_block *sb, void *data)
{
}
int security_sb_get_mnt_opts(const struct super_block *sb,
- char ***mount_options,
- int **flags, int *num_opts)
+ struct security_mnt_opts *opts)
{
- return security_ops->sb_get_mnt_opts(sb, mount_options, flags, num_opts);
+ return security_ops->sb_get_mnt_opts(sb, opts);
}
int security_sb_set_mnt_opts(struct super_block *sb,
- char **mount_options,
- int *flags, int num_opts)
+ struct security_mnt_opts *opts)
{
- return security_ops->sb_set_mnt_opts(sb, mount_options, flags, num_opts);
+ return security_ops->sb_set_mnt_opts(sb, opts);
}
+EXPORT_SYMBOL(security_sb_set_mnt_opts);
void security_sb_clone_mnt_opts(const struct super_block *oldsb,
struct super_block *newsb)
{
security_ops->sb_clone_mnt_opts(oldsb, newsb);
}
+EXPORT_SYMBOL(security_sb_clone_mnt_opts);
+
+int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts)
+{
+ return security_ops->sb_parse_opts_str(options, opts);
+}
+EXPORT_SYMBOL(security_sb_parse_opts_str);
int security_inode_alloc(struct inode *inode)
{
* mount options, or whatever.
*/
static int selinux_get_mnt_opts(const struct super_block *sb,
- char ***mount_options, int **mnt_opts_flags,
- int *num_opts)
+ struct security_mnt_opts *opts)
{
int rc = 0, i;
struct superblock_security_struct *sbsec = sb->s_security;
u32 len;
char tmp;
- *num_opts = 0;
- *mount_options = NULL;
- *mnt_opts_flags = NULL;
+ security_init_mnt_opts(opts);
if (!sbsec->initialized)
return -EINVAL;
/* count the number of mount options for this sb */
for (i = 0; i < 8; i++) {
if (tmp & 0x01)
- (*num_opts)++;
+ opts->num_mnt_opts++;
tmp >>= 1;
}
- *mount_options = kcalloc(*num_opts, sizeof(char *), GFP_ATOMIC);
- if (!*mount_options) {
+ opts->mnt_opts = kcalloc(opts->num_mnt_opts, sizeof(char *), GFP_ATOMIC);
+ if (!opts->mnt_opts) {
rc = -ENOMEM;
goto out_free;
}
- *mnt_opts_flags = kcalloc(*num_opts, sizeof(int), GFP_ATOMIC);
- if (!*mnt_opts_flags) {
+ opts->mnt_opts_flags = kcalloc(opts->num_mnt_opts, sizeof(int), GFP_ATOMIC);
+ if (!opts->mnt_opts_flags) {
rc = -ENOMEM;
goto out_free;
}
rc = security_sid_to_context(sbsec->sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = FSCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = FSCONTEXT_MNT;
}
if (sbsec->flags & CONTEXT_MNT) {
rc = security_sid_to_context(sbsec->mntpoint_sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = CONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = CONTEXT_MNT;
}
if (sbsec->flags & DEFCONTEXT_MNT) {
rc = security_sid_to_context(sbsec->def_sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = DEFCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = DEFCONTEXT_MNT;
}
if (sbsec->flags & ROOTCONTEXT_MNT) {
struct inode *root = sbsec->sb->s_root->d_inode;
rc = security_sid_to_context(isec->sid, &context, &len);
if (rc)
goto out_free;
- (*mount_options)[i] = context;
- (*mnt_opts_flags)[i++] = ROOTCONTEXT_MNT;
+ opts->mnt_opts[i] = context;
+ opts->mnt_opts_flags[i++] = ROOTCONTEXT_MNT;
}
- BUG_ON(i != *num_opts);
+ BUG_ON(i != opts->num_mnt_opts);
return 0;
out_free:
- /* don't leak context string if security_sid_to_context had an error */
- if (*mount_options && i)
- for (; i > 0; i--)
- kfree((*mount_options)[i-1]);
- kfree(*mount_options);
- *mount_options = NULL;
- kfree(*mnt_opts_flags);
- *mnt_opts_flags = NULL;
- *num_opts = 0;
+ security_free_mnt_opts(opts);
return rc;
}
return 1;
return 0;
}
+
/*
* Allow filesystems with binary mount data to explicitly set mount point
* labeling information.
*/
-static int selinux_set_mnt_opts(struct super_block *sb, char **mount_options,
- int *flags, int num_opts)
+static int selinux_set_mnt_opts(struct super_block *sb,
+ struct security_mnt_opts *opts)
{
int rc = 0, i;
struct task_security_struct *tsec = current->security;
struct inode_security_struct *root_isec = inode->i_security;
u32 fscontext_sid = 0, context_sid = 0, rootcontext_sid = 0;
u32 defcontext_sid = 0;
+ char **mount_options = opts->mnt_opts;
+ int *flags = opts->mnt_opts_flags;
+ int num_opts = opts->num_mnt_opts;
mutex_lock(&sbsec->lock);
goto out;
}
+ /*
+ * Binary mount data FS will come through this function twice. Once
+ * from an explicit call and once from the generic calls from the vfs.
+ * Since the generic VFS calls will not contain any security mount data
+ * we need to skip the double mount verification.
+ *
+ * This does open a hole in which we will not notice if the first
+ * mount using this sb set explict options and a second mount using
+ * this sb does not set any security options. (The first options
+ * will be used for both mounts)
+ */
+ if (sbsec->initialized && (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA)
+ && (num_opts == 0))
+ goto out;
+
/*
* parse the mount options, check if they are valid sids.
* also check if someone is trying to mount the same sb more
mutex_unlock(&newsbsec->lock);
}
-/*
- * string mount options parsing and call set the sbsec
- */
-static int superblock_doinit(struct super_block *sb, void *data)
+int selinux_parse_opts_str(char *options, struct security_mnt_opts *opts)
{
+ char *p;
char *context = NULL, *defcontext = NULL;
char *fscontext = NULL, *rootcontext = NULL;
- int rc = 0;
- char *p, *options = data;
- /* selinux only know about a fixed number of mount options */
- char *mnt_opts[NUM_SEL_MNT_OPTS];
- int mnt_opts_flags[NUM_SEL_MNT_OPTS], num_mnt_opts = 0;
-
- if (!data)
- goto out;
+ int rc, num_mnt_opts = 0;
- /* with the nfs patch this will become a goto out; */
- if (sb->s_type->fs_flags & FS_BINARY_MOUNTDATA) {
- const char *name = sb->s_type->name;
- /* NFS we understand. */
- if (!strcmp(name, "nfs")) {
- struct nfs_mount_data *d = data;
-
- if (d->version != NFS_MOUNT_VERSION)
- goto out;
-
- if (d->context[0]) {
- context = kstrdup(d->context, GFP_KERNEL);
- if (!context) {
- rc = -ENOMEM;
- goto out;
- }
- }
- goto build_flags;
- } else
- goto out;
- }
+ opts->num_mnt_opts = 0;
/* Standard string-based options. */
while ((p = strsep(&options, "|")) != NULL) {
}
}
-build_flags:
+ rc = -ENOMEM;
+ opts->mnt_opts = kcalloc(NUM_SEL_MNT_OPTS, sizeof(char *), GFP_ATOMIC);
+ if (!opts->mnt_opts)
+ goto out_err;
+
+ opts->mnt_opts_flags = kcalloc(NUM_SEL_MNT_OPTS, sizeof(int), GFP_ATOMIC);
+ if (!opts->mnt_opts_flags) {
+ kfree(opts->mnt_opts);
+ goto out_err;
+ }
+
if (fscontext) {
- mnt_opts[num_mnt_opts] = fscontext;
- mnt_opts_flags[num_mnt_opts++] = FSCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = fscontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = FSCONTEXT_MNT;
}
if (context) {
- mnt_opts[num_mnt_opts] = context;
- mnt_opts_flags[num_mnt_opts++] = CONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = context;
+ opts->mnt_opts_flags[num_mnt_opts++] = CONTEXT_MNT;
}
if (rootcontext) {
- mnt_opts[num_mnt_opts] = rootcontext;
- mnt_opts_flags[num_mnt_opts++] = ROOTCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = rootcontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = ROOTCONTEXT_MNT;
}
if (defcontext) {
- mnt_opts[num_mnt_opts] = defcontext;
- mnt_opts_flags[num_mnt_opts++] = DEFCONTEXT_MNT;
+ opts->mnt_opts[num_mnt_opts] = defcontext;
+ opts->mnt_opts_flags[num_mnt_opts++] = DEFCONTEXT_MNT;
}
-out:
- rc = selinux_set_mnt_opts(sb, mnt_opts, mnt_opts_flags, num_mnt_opts);
+ opts->num_mnt_opts = num_mnt_opts;
+ return 0;
+
out_err:
kfree(context);
kfree(defcontext);
kfree(rootcontext);
return rc;
}
+/*
+ * string mount options parsing and call set the sbsec
+ */
+static int superblock_doinit(struct super_block *sb, void *data)
+{
+ int rc = 0;
+ char *options = data;
+ struct security_mnt_opts opts;
+
+ security_init_mnt_opts(&opts);
+
+ if (!data)
+ goto out;
+
+ BUG_ON(sb->s_type->fs_flags & FS_BINARY_MOUNTDATA);
+
+ rc = selinux_parse_opts_str(options, &opts);
+ if (rc)
+ goto out_err;
+
+out:
+ rc = selinux_set_mnt_opts(sb, &opts);
+
+out_err:
+ security_free_mnt_opts(&opts);
+ return rc;
+}
static inline u16 inode_mode_to_security_class(umode_t mode)
{
}
}
-static int selinux_sb_copy_data(struct file_system_type *type, void *orig, void *copy)
+static int selinux_sb_copy_data(char *orig, char *copy)
{
int fnosec, fsec, rc = 0;
char *in_save, *in_curr, *in_end;
in_curr = orig;
sec_curr = copy;
- /* Binary mount data: just copy */
- if (type->fs_flags & FS_BINARY_MOUNTDATA) {
- copy_page(sec_curr, in_curr);
- goto out;
- }
-
nosec = (char *)get_zeroed_page(GFP_KERNEL);
if (!nosec) {
rc = -ENOMEM;
.sb_get_mnt_opts = selinux_get_mnt_opts,
.sb_set_mnt_opts = selinux_set_mnt_opts,
.sb_clone_mnt_opts = selinux_sb_clone_mnt_opts,
+ .sb_parse_opts_str = selinux_parse_opts_str,
+
.inode_alloc_security = selinux_inode_alloc_security,
.inode_free_security = selinux_inode_free_security,
#define POLICYDB_VERSION_MAX POLICYDB_VERSION_POLCAP
#endif
+#define CONTEXT_MNT 0x01
+#define FSCONTEXT_MNT 0x02
+#define ROOTCONTEXT_MNT 0x04
+#define DEFCONTEXT_MNT 0x08
+
struct netlbl_lsm_secattr;
extern int selinux_enabled;
* Copy the Smack specific mount options out of the mount
* options list.
*/
-static int smack_sb_copy_data(struct file_system_type *type, void *orig,
- void *smackopts)
+static int smack_sb_copy_data(char *orig, char *smackopts)
{
char *cp, *commap, *otheropts, *dp;
- /* Binary mount data: just copy */
- if (type->fs_flags & FS_BINARY_MOUNTDATA) {
- copy_page(smackopts, orig);
- return 0;
- }
-
otheropts = (char *)get_zeroed_page(GFP_KERNEL);
if (otheropts == NULL)
return -ENOMEM;
channels = kcalloc(MAX_MASK, sizeof(u32), GFP_KERNEL);
rates = kcalloc(MAX_MASK, sizeof(u32), GFP_KERNEL);
+ if (!channels || !rates)
+ goto __out;
list_for_each(p, &subs->fmt_list) {
struct audioformat *f;
projects / linux-2.6-omap-h63xx.git / commitdiff