config SYS_SUPPORTS_PCI
bool
+config SYS_SUPPORTS_CMT
+ bool
+
config STACKTRACE_SUPPORT
def_bool y
config CPU_SHX3
bool
+config ARCH_SHMOBILE
+ bool
+ select ARCH_SUSPEND_POSSIBLE
+
choice
prompt "Processor sub-type selection"
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
+ select SYS_SUPPORTS_CMT
# SH-2A Processor Support
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
bool "Support SH7723 processor"
select CPU_SH4A
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_CMT
help
Select SH7723 if you have an SH-MobileR2 CPU.
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+config CPU_SUBTYPE_SH7786
+ bool "Support SH7786 processor"
+ select CPU_SH4A
+ select CPU_SHX3
+ select CPU_HAS_PTEAEX
+ select ARCH_SPARSEMEM_ENABLE
+ select SYS_SUPPORTS_NUMA
+
config CPU_SUBTYPE_SHX3
bool "Support SH-X3 processor"
select CPU_SH4A
config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
+ select ARCH_SHMOBILE
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_CMT
config CPU_SUBTYPE_SH7366
bool "Support SH7366 processor"
select CPU_SH4AL_DSP
select CPU_SHX2
+ select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
+ select SYS_SUPPORTS_CMT
# SH-5 Processor Support
menu "Timer and clock configuration"
config SH_TMU
- def_bool y
- prompt "TMU timer support"
+ bool "TMU timer support"
depends on CPU_SH3 || CPU_SH4
+ default y
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
help
This enables the use of the TMU as the system timer.
config SH_CMT
- def_bool y
- prompt "CMT timer support"
- depends on CPU_SH2 && !CPU_SUBTYPE_MXG
+ bool "CMT timer support"
+ depends on SYS_SUPPORTS_CMT && CPU_SH2
+ default y
help
This enables the use of the CMT as the system timer.
+#
+# Support for the new-style CMT driver. This will replace SH_CMT
+# once its other dependencies are merged.
+#
+config SH_TIMER_CMT
+ bool "CMT clockevents driver"
+ depends on SYS_SUPPORTS_CMT && !SH_CMT
+ select GENERIC_CLOCKEVENTS
+
config SH_MTU2
- def_bool n
- prompt "MTU2 timer support"
+ bool "MTU2 timer support"
depends on CPU_SH2A
+ default y
help
This enables the use of the MTU2 as the system timer.
CPU_SUBTYPE_SH7763
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
- default "142" if CPU_SUBTYPE_SH7203
+ default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
+ default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
default "238" if CPU_SUBTYPE_MXG
default "16"
default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
- CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
+ CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG || \
+ CPU_SUBTYPE_SH7786
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
For more details see Documentation/kdump/kdump.txt
+config KEXEC_JUMP
+ bool "kexec jump (EXPERIMENTAL)"
+ depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+ help
+ Jump between original kernel and kexeced kernel and invoke
+ code via KEXEC
+
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
config CPU_HAS_PTEA
bool
+config CPU_HAS_PTEAEX
+ bool
+
config CPU_HAS_DSP
bool
defaultimage-$(CONFIG_SUPERH32) := zImage
defaultimage-$(CONFIG_SH_SH7785LCR) := uImage
defaultimage-$(CONFIG_SH_RSK) := uImage
+defaultimage-$(CONFIG_SH_URQUELL) := uImage
defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE) := vmlinux
defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE) := vmlinux
config SH_SH7785LCR_29BIT_PHYSMAPS
bool "SH7785LCR 29bit physmaps"
- depends on SH_SH7785LCR
+ depends on SH_SH7785LCR && 29BIT
default y
help
This board has 2 physical memory maps. It can be changed with
DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
you can access all on-board device in 29bit address mode.
+config SH_URQUELL
+ bool "Urquell"
+ depends on CPU_SUBTYPE_SH7786
+ select ARCH_REQUIRE_GPIOLIB
+
config SH_MIGOR
bool "Migo-R"
depends on CPU_SUBTYPE_SH7722
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Select Migo-R if configuring for the SH7722 Migo-R platform
by Renesas System Solutions Asia Pte. Ltd.
config SH_AP325RXA
bool "AP-325RXA"
depends on CPU_SUBTYPE_SH7723
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Renesas "AP-325RXA" support.
Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
Select SH7763RDP if configuring for a Renesas SH7763
evaluation board.
+config SH_ESPT
+ bool "ESPT"
+ depends on CPU_SUBTYPE_SH7763
+ help
+ Select ESPT if configuring for a Renesas SH7763
+ with gigabit ether evaluation board.
+
config SH_EDOSK7705
bool "EDOSK7705"
depends on CPU_SUBTYPE_SH7705
config SH_MAGIC_PANEL_R2
bool "Magic Panel R2"
depends on CPU_SUBTYPE_SH7720
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
help
Select Magic Panel R2 if configuring for Magic Panel R2.
depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
select SYS_SUPPORTS_PCI
+config SH_POLARIS
+ bool "SMSC Polaris"
+ select CPU_HAS_IPR_IRQ
+ depends on CPU_SUBTYPE_SH7709
+ help
+ Select if configuring for an SMSC Polaris development board
+
endmenu
source "arch/sh/boards/mach-r2d/Kconfig"
obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL) += board-urquell.o
obj-$(CONFIG_SH_SHMIN) += board-shmin.o
obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o
+obj-$(CONFIG_SH_ESPT) += board-espt.o
+obj-$(CONFIG_SH_POLARIS) += board-polaris.o
ctrl_outw(0x100, FPGA_BKLREG);
}
+static void ap320_wvga_power_off(void *board_data)
+{
+ /* backlight */
+ ctrl_outw(0, FPGA_BKLREG);
+ gpio_set_value(GPIO_PTS3, 1);
+
+ /* ASD AP-320/325 LCD OFF */
+ ctrl_outw(0, FPGA_LCDREG);
+}
+
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_EXTERNAL,
.ch[0] = {
},
.board_cfg = {
.display_on = ap320_wvga_power_on,
+ .display_off = ap320_wvga_power_off,
},
}
};
--- /dev/null
+/*
+ * Data Technology Inc. ESPT-GIGA board suport
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/sh_eth.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+ {
+ .name = "U-Boot",
+ .offset = 0,
+ .size = (2 * SZ_128K),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "Linux-Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (20 * SZ_128K),
+ }, {
+ .name = "Root Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+ .width = 2,
+ .parts = espt_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0,
+ .end = SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device espt_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = espt_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+ .dev = {
+ .platform_data = &espt_nor_flash_data,
+ },
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xFEE00800, /* use eth1 */
+ .end = 0xFEE00F7C - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 57, /* irq number */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+ .phy = 0,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device espt_eth_device = {
+ .name = "sh-eth",
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .dev = {
+ .platform_data = &sh7763_eth_pdata,
+ },
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+ &espt_nor_flash_device,
+ &espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+ return platform_add_devices(espt_devices,
+ ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+ .mv_name = "ESPT-GIGA",
+};
--- /dev/null
+/*
+ * June 2006 steve.glendinning@smsc.com
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2 (0xFFFFFF62)
+#define WCR2 (0xFFFFFF66)
+#define AREA5_WAIT_CTRL (0x1C00)
+#define WAIT_STATES_10 (0x7)
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .name = "smsc911x-memory",
+ .start = PA_EXT5,
+ .end = PA_EXT5 + 0x1fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "smsc911x-irq",
+ .start = IRQ0_IRQ,
+ .end = IRQ0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+ .bit_pos = heartbeat_bit_pos,
+ .nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
+ .regsize = 8,
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PORT_PCDR,
+ .end = PORT_PCDR,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+ &smsc911x_device,
+ &heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+ u16 wcr, bcr_mask;
+
+ printk(KERN_INFO "Configuring Polaris external bus\n");
+
+ /* Configure area 5 with 2 wait states */
+ wcr = ctrl_inw(WCR2);
+ wcr &= (~AREA5_WAIT_CTRL);
+ wcr |= (WAIT_STATES_10 << 10);
+ ctrl_outw(wcr, WCR2);
+
+ /* Configure area 5 for 32-bit access */
+ bcr_mask = ctrl_inw(BCR2);
+ bcr_mask |= 1 << 10;
+ ctrl_outw(bcr_mask, BCR2);
+
+ return platform_add_devices(polaris_devices,
+ ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+ /* External IRQs */
+ { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */
+ { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+ INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+ .ipr_offsets = ipr_offsets,
+ .nr_offsets = ARRAY_SIZE(ipr_offsets),
+
+ .ipr_data = ipr_irq_table,
+ .nr_irqs = ARRAY_SIZE(ipr_irq_table),
+ .chip = {
+ .name = "sh7709-ext",
+ },
+};
+
+static void __init init_polaris_irq(void)
+{
+ /* Disable all interrupts */
+ ctrl_outw(0, BCR_ILCRA);
+ ctrl_outw(0, BCR_ILCRB);
+ ctrl_outw(0, BCR_ILCRC);
+ ctrl_outw(0, BCR_ILCRD);
+ ctrl_outw(0, BCR_ILCRE);
+ ctrl_outw(0, BCR_ILCRF);
+ ctrl_outw(0, BCR_ILCRG);
+
+ register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+ .mv_name = "Polaris",
+ .mv_nr_irqs = 61,
+ .mv_init_irq = init_polaris_irq,
+};
static void sh7785lcr_power_off(void)
{
- ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+ unsigned char *p;
+
+ p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+ if (!p) {
+ printk(KERN_ERR "%s: ioremap error.\n", __func__);
+ return;
+ }
+ *p = 0x01;
+ iounmap(p);
+ set_bl_bit();
+ while (1)
+ cpu_relax();
}
/* Initialize the board */
--- /dev/null
+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = BOARDREG(SLEDR),
+ .end = BOARDREG(SLEDR),
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct heartbeat_data heartbeat_data = {
+ .regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+ [0] = {
+ .name = "SMC91C111" ,
+ .start = 0x05800300,
+ .end = 0x0580030f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc91x_eth_device = {
+ .name = "smc91x",
+ .num_resources = ARRAY_SIZE(smc91x_eth_resources),
+ .resource = smc91x_eth_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = NOR_FLASH_ADDR,
+ .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+ &heartbeat_device,
+ &smc91x_eth_device,
+ &nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+ /* USB */
+ gpio_request(GPIO_FN_USB_OVC0, NULL);
+ gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+ return platform_add_devices(urquell_devices,
+ ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+ __raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+static void __init urquell_init_irq(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+ printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+ pm_power_off = urquell_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+ .mv_name = "Urquell",
+ .mv_setup = urquell_setup,
+ .mv_init_irq = urquell_init_irq,
+};
config SH_R7785RP
bool "R7785RP board support"
depends on CPU_SUBTYPE_SH7785
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
endchoice
#include <linux/linkage.h>
#include <cpu/mmu_context.h>
-#define k0 r0
-#define k1 r1
-#define k2 r2
-#define k3 r3
-#define k4 r4
-
/*
* Kernel mode register usage:
* k0 scratch
* k1 scratch
- * k2 scratch (Exception code)
- * k3 scratch (Return address)
- * k4 scratch
- * k5 reserved
- * k6 Global Interrupt Mask (0--15 << 4)
- * k7 CURRENT_THREAD_INFO (pointer to current thread info)
+ * For more details, please have a look at entry.S
*/
+#define k0 r0
+#define k1 r1
+
ENTRY(wakeup_start)
! clear STBY bit
- mov #-126, k2
+ mov #-126, k1
and #127, k0
- mov.b k0, @k2
+ mov.b k0, @k1
! enable refresh
mov.l 5f, k1
mov.w 6f, k0
mov.w k0, @k1
! jump to handler
- mov.l 2f, k2
- mov.l 3f, k3
- mov.l @k2, k2
-
mov.l 4f, k1
jmp @k1
- nop
+ nop
.align 2
-1: .long EXPEVT
-2: .long INTEVT
-3: .long ret_from_irq
-4: .long handle_exception
+4: .long handle_interrupt
5: .long 0xffffff68
6: .word 0x0524
.mv_setup = hp6xx_setup,
/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
- .mv_irq_demux = hd64461_irq_demux,
/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
.mv_init_irq = hp6xx_init_irq,
};
static int __init migor_devices_setup(void)
{
+
+#ifdef CONFIG_PM
+ /* Let D11 LED show STATUS0 */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+
+ /* Lit D12 LED show PDSTATUS */
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
/* Lit D11 LED */
gpio_request(GPIO_PTJ7, NULL);
gpio_direction_output(GPIO_PTJ7, 1);
gpio_request(GPIO_PTJ5, NULL);
gpio_direction_output(GPIO_PTJ5, 1);
gpio_export(GPIO_PTJ5, 0);
+#endif
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
gpio_request(GPIO_FN_IRQ0, NULL);
config SH_RSK7203
bool "RSK7203"
- select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
depends on CPU_SUBTYPE_SH7203
endchoice
},
};
-/* SH-Ether */
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (57,58,59 -> 57)
+ */
static struct resource sh_eth_resources[] = {
{
.start = 0xFEE00800, /* use eth1 */
.end = 0xFEE00F7C - 1,
.flags = IORESOURCE_MEM,
}, {
- .start = 58, /* irq number */
- .end = 58,
+ .start = 57, /* irq number */
.flags = IORESOURCE_IRQ,
},
};
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-ifeq ($(CONFIG_32BIT),y)
-KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
- $$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_ZERO_PAGE_OFFSET)]')
-else
+KERNEL_MEMORY := 0x00000000
+ifeq ($(CONFIG_PMB_FIXED),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+endif
+ifeq ($(CONFIG_29BIT),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+ $$[$(CONFIG_MEMORY_START)]')
+endif
+
KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_MEMORY_START) + \
+ $(KERNEL_MEMORY) + \
$(CONFIG_ZERO_PAGE_OFFSET)]')
-endif
KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \
$$[$(CONFIG_PAGE_OFFSET) + \
- $(CONFIG_MEMORY_START) + \
+ $(KERNEL_MEMORY) + \
$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
quiet_cmd_uimage = UIMAGE $@
.unmask = hd64461_unmask_irq,
};
-int hd64461_irq_demux(int irq)
+static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- if (irq == CONFIG_HD64461_IRQ) {
- unsigned short bit;
- unsigned short nirr = inw(HD64461_NIRR);
- unsigned short nimr = inw(HD64461_NIMR);
- int i;
-
- nirr &= ~nimr;
- for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
- if (nirr & bit)
- break;
- irq = HD64461_IRQBASE + i;
+ unsigned short intv = ctrl_inw(HD64461_NIRR);
+ struct irq_desc *ext_desc;
+ unsigned int ext_irq = HD64461_IRQBASE;
+
+ intv &= (1 << HD64461_IRQ_NUM) - 1;
+
+ while (intv) {
+ if (intv & 1) {
+ ext_desc = irq_desc + ext_irq;
+ handle_level_irq(ext_irq, ext_desc);
+ }
+ intv >>= 1;
+ ext_irq++;
}
- return irq;
}
int __init setup_hd64461(void)
set_irq_chip_and_handler(i, &hd64461_irq_chip,
handle_level_irq);
+ set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
+ set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
+
#ifdef CONFIG_HD64461_ENABLER
printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
__raw_writeb(0x4c, HD64461_PCC1CSCIER);
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc7
+# Tue Mar 17 13:25:58 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SH7786 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_SH7763RDP is not set
+CONFIG_SH_ESPT=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Wed Feb 11 18:41:59 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+CONFIG_CPU_SUBTYPE_SH7709=y
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU_EMU=y
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_HP6XX is not set
+CONFIG_SH_POLARIS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33000000
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_COMPAT=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_WRITEBUFFER is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+# CONFIG_PROVE_LOCKING is not set
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_DEBUG_SG=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_DUMP_CODE=y
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Fri Feb 20 18:25:29 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x20000000
+# CONFIG_29BIT is not set
+CONFIG_32BIT=y
+CONFIG_PMB_ENABLE=y
+# CONFIG_PMB is not set
+CONFIG_PMB_FIXED=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_MII=y
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_DUMP_CODE is not set
+# CONFIG_SH_NO_BSS_INIT is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc4
+# Thu Mar 5 17:28:13 2009
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
+# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7201 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+CONFIG_CPU_SUBTYPE_SH7786=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+CONFIG_UNEVICTABLE_LRU=y
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_URQUELL=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC1, 38400 earlyprintk=serial ip=on ignore_loglevel root=/dev/nfs ip=dhcp memchunk.vpu=4m"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+# CONFIG_CPU_IDLE is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+CONFIG_THRUSTMASTER_FF=m
+CONFIG_ZEROPLUS_FF=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
select SH_DMA_API
default n
+config SH_DMA_IRQ_MULTI
+ bool
+ depends on SH_DMA
+ default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+ CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+ CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
+ CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+
config NR_ONCHIP_DMA_CHANNELS
int
depends on SH_DMA
- default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
- default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
- default "12" if CPU_SUBTYPE_SH7780
- default "4"
+ default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S
+ default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760
+ default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+ default "6"
help
This allows you to specify the number of channels that the on-chip
DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the
of the SH7760.
Say Y if you want to use Audio/USB DMA on your SH7760 board.
+config PVR2_DMA
+ tristate "PowerVR 2 DMAC support"
+ depends on SH_DREAMCAST && SH_DMA
+ help
+ Selecting this will enable support for the PVR2 DMA controller.
+ As this chains off of the on-chip DMAC, that must also be
+ enabled by default.
+
+ This is primarily used by the pvr2fb framebuffer driver for
+ certain optimizations, but is not necessary for functionality.
+
+ If in doubt, say N.
+
+config G2_DMA
+ tristate "G2 Bus DMA support"
+ depends on SH_DREAMCAST
+ select SH_DMA_API
+ help
+ This enables support for the DMA controller for the Dreamcast's
+ G2 bus. Drivers that want this will generally enable this on
+ their own.
+
+ If in doubt, say N.
+
endmenu
obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o
obj-$(CONFIG_SH_DMA) += dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o
+obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
+obj-$(CONFIG_G2_DMA) += dma-g2.o
obj-$(CONFIG_SH_DMABRG) += dmabrg.o
#include <mach-dreamcast/mach/dma.h>
#include <asm/dma.h>
#include <asm/io.h>
-#include "dma-sh.h"
-
-static int dmte_irq_map[] = {
- DMTE0_IRQ,
- DMTE1_IRQ,
- DMTE2_IRQ,
- DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780)
- DMTE4_IRQ,
- DMTE5_IRQ,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \
- defined(CONFIG_CPU_SUBTYPE_SH7760) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780)
- DMTE6_IRQ,
- DMTE7_IRQ,
+#include <asm/dma-sh.h>
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE 2
+#else
+#define NR_DMAE 1
#endif
+
+static const char *dmae_name[] = {
+ "DMAC Address Error0", "DMAC Address Error1"
};
static inline unsigned int get_dmte_irq(unsigned int chan)
unsigned int irq = 0;
if (chan < ARRAY_SIZE(dmte_irq_map))
irq = dmte_irq_map[chan];
+
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+ if (irq > DMTE6_IRQ)
+ return DMTE6_IRQ;
+ return DMTE0_IRQ;
+#else
return irq;
+#endif
}
/*
*/
static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
{
- u32 chcr = ctrl_inl(CHCR[chan->chan]);
+ u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
}
struct dma_channel *chan = dev_id;
u32 chcr;
- chcr = ctrl_inl(CHCR[chan->chan]);
+ chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
if (!(chcr & CHCR_TE))
return IRQ_NONE;
chcr &= ~(CHCR_IE | CHCR_DE);
- ctrl_outl(chcr, CHCR[chan->chan]);
+ ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
wake_up(&chan->wait_queue);
return 0;
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- IRQF_DISABLED, chan->dev_id, chan);
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+ IRQF_SHARED,
+#else
+ IRQF_DISABLED,
+#endif
+ chan->dev_id, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
chan->flags &= ~DMA_TEI_CAPABLE;
}
- ctrl_outl(chcr, CHCR[chan->chan]);
+ ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
chan->flags |= DMA_CONFIGURED;
return 0;
int irq;
u32 chcr;
- chcr = ctrl_inl(CHCR[chan->chan]);
+ chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
chcr |= CHCR_DE;
if (chan->flags & DMA_TEI_CAPABLE)
chcr |= CHCR_IE;
- ctrl_outl(chcr, CHCR[chan->chan]);
+ ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
if (chan->flags & DMA_TEI_CAPABLE) {
irq = get_dmte_irq(chan->chan);
disable_irq(irq);
}
- chcr = ctrl_inl(CHCR[chan->chan]);
+ chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
- ctrl_outl(chcr, CHCR[chan->chan]);
+ ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
}
static int sh_dmac_xfer_dma(struct dma_channel *chan)
*/
if (chan->sar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->sar, SAR[chan->chan]);
+ ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
if (chan->dar || (mach_is_dreamcast() &&
chan->chan == PVR2_CASCADE_CHAN))
- ctrl_outl(chan->dar, DAR[chan->chan]);
+ ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
- ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
+ ctrl_outl(chan->count >> calc_xmit_shift(chan),
+ (dma_base_addr[chan->chan] + TCR));
sh_dmac_enable_dma(chan);
static int sh_dmac_get_dma_residue(struct dma_channel *chan)
{
- if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE))
+ if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
return 0;
- return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
+ return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+ << calc_xmit_shift(chan);
}
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define dmaor_read_reg() ctrl_inw(DMAOR)
-#define dmaor_write_reg(data) ctrl_outw(data, DMAOR)
-#else
-#define dmaor_read_reg() ctrl_inl(DMAOR)
-#define dmaor_write_reg(data) ctrl_outl(data, DMAOR)
-#endif
-
-static inline int dmaor_reset(void)
+static inline int dmaor_reset(int no)
{
- unsigned long dmaor = dmaor_read_reg();
+ unsigned long dmaor = dmaor_read_reg(no);
/* Try to clear the error flags first, incase they are set */
dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
- dmaor_write_reg(dmaor);
+ dmaor_write_reg(no, dmaor);
dmaor |= DMAOR_INIT;
- dmaor_write_reg(dmaor);
+ dmaor_write_reg(no, dmaor);
/* See if we got an error again */
- if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+ if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
return -EINVAL;
}
#if defined(CONFIG_CPU_SH4)
static irqreturn_t dma_err(int irq, void *dummy)
{
- dmaor_reset();
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+ int cnt = 0;
+ switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+ case DMTE6_IRQ:
+ cnt++;
+#endif
+ case DMTE0_IRQ:
+ if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+ disable_irq(irq);
+ /* DMA multi and error IRQ */
+ return IRQ_HANDLED;
+ }
+ default:
+ return IRQ_NONE;
+ }
+#else
+ dmaor_reset(0);
+#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
+ dmaor_reset(1);
+#endif
disable_irq(irq);
return IRQ_HANDLED;
+#endif
}
#endif
.flags = DMAC_CHANNELS_TEI_CAPABLE,
};
+#ifdef CONFIG_CPU_SH4
+static unsigned int get_dma_error_irq(int n)
+{
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+ return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
+#else
+ return (n == 0) ? DMAE0_IRQ :
+#if defined(DMAE1_IRQ)
+ DMAE1_IRQ;
+#else
+ -1;
+#endif
+#endif
+}
+#endif
+
static int __init sh_dmac_init(void)
{
struct dma_info *info = &sh_dmac_info;
int i;
#ifdef CONFIG_CPU_SH4
- i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
- if (unlikely(i < 0))
- return i;
+ int n;
+
+ for (n = 0; n < NR_DMAE; n++) {
+ i = request_irq(get_dma_error_irq(n), dma_err,
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+ IRQF_SHARED,
+#else
+ IRQF_DISABLED,
#endif
+ dmae_name[n], (void *)dmae_name[n]);
+ if (unlikely(i < 0)) {
+ printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+ return i;
+ }
+ }
+#endif /* CONFIG_CPU_SH4 */
/*
* Initialize DMAOR, and clean up any error flags that may have
* been set.
*/
- i = dmaor_reset();
+ i = dmaor_reset(0);
+ if (unlikely(i != 0))
+ return i;
+#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
+ i = dmaor_reset(1);
if (unlikely(i != 0))
return i;
+#endif
return register_dmac(info);
}
static void __exit sh_dmac_exit(void)
{
#ifdef CONFIG_CPU_SH4
- free_irq(DMAE_IRQ, 0);
-#endif
+ int n;
+
+ for (n = 0; n < NR_DMAE; n++) {
+ free_irq(get_dma_error_irq(n), (void *)dmae_name[n]);
+ }
+#endif /* CONFIG_CPU_SH4 */
unregister_dmac(&sh_dmac_info);
}
+++ /dev/null
-/*
- * arch/sh/drivers/dma/dma-sh.h
- *
- * Copyright (C) 2000 Takashi YOSHII
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __DMA_SH_H
-#define __DMA_SH_H
-
-#include <cpu/dma.h>
-
-/* Definitions for the SuperH DMAC */
-#define REQ_L 0x00000000
-#define REQ_E 0x00080000
-#define RACK_H 0x00000000
-#define RACK_L 0x00040000
-#define ACK_R 0x00000000
-#define ACK_W 0x00020000
-#define ACK_H 0x00000000
-#define ACK_L 0x00010000
-#define DM_INC 0x00004000
-#define DM_DEC 0x00008000
-#define SM_INC 0x00001000
-#define SM_DEC 0x00002000
-#define RS_IN 0x00000200
-#define RS_OUT 0x00000300
-#define TS_BLK 0x00000040
-#define TM_BUR 0x00000020
-#define CHCR_DE 0x00000001
-#define CHCR_TE 0x00000002
-#define CHCR_IE 0x00000004
-
-/* DMAOR definitions */
-#define DMAOR_AE 0x00000004
-#define DMAOR_NMIF 0x00000002
-#define DMAOR_DME 0x00000001
-
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
-
-#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS)
-
-/*
- * Subtypes that have fewer channels than this simply need to change
- * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
- * of channels should expand on this.
- *
- * For most subtypes we can easily figure these values out with some
- * basic calculation, unfortunately on other subtypes these are more
- * scattered, so we just leave it unrolled for simplicity.
- */
-#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
- SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
- SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
-#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
- SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
- SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
-#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
- SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
- SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
-#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
- SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
- SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
-
-#define DMAOR (SH_DMAC_BASE + 0x40)
-
-#endif /* __DMA_SH_H */
-
pci_write_reg(word, SH4_PCILSR0);
pci_write_reg(0x00000001, SH4_PCILSR1);
/* Set the values on window 0 PCI config registers */
- word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
- pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+ word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000);
+ pci_write_reg(word, SH4_PCILAR0);
pci_write_reg(word, SH7780_PCIMBAR0);
/* Set the values on window 1 PCI config registers */
pci_write_reg(0x00000000, SH4_PCILAR1);
/* Returns the physical address of a PnSEG (n=1,2) address */
#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff)
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
/*
* Map an address to a certain privileged segment
*/
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
#define P4SEGADDR(a) \
((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
+#endif /* 29BIT || PMB_FIXED */
#endif /* P1SEG */
/* Check if an address can be reached in 29 bits */
unsigned long flags;
local_irq_save(flags);
- *(long *)v += i;
+ v->counter += i;
local_irq_restore(flags);
}
unsigned long flags;
local_irq_save(flags);
- *(long *)v -= i;
+ v->counter -= i;
local_irq_restore(flags);
}
unsigned long temp, flags;
local_irq_save(flags);
- temp = *(long *)v;
+ temp = v->counter;
temp += i;
- *(long *)v = temp;
+ v->counter = temp;
local_irq_restore(flags);
return temp;
unsigned long temp, flags;
local_irq_save(flags);
- temp = *(long *)v;
+ temp = v->counter;
temp -= i;
- *(long *)v = temp;
+ v->counter = temp;
local_irq_restore(flags);
return temp;
unsigned long flags;
local_irq_save(flags);
- *(long *)v &= ~mask;
+ v->counter &= ~mask;
local_irq_restore(flags);
}
unsigned long flags;
local_irq_save(flags);
- *(long *)v |= mask;
+ v->counter |= mask;
local_irq_restore(flags);
}
#ifndef __ASM_SH_BITOPS_LLSC_H
#define __ASM_SH_BITOPS_LLSC_H
-static inline void set_bit(int nr, volatile void * addr)
+static inline void set_bit(int nr, volatile void *addr)
{
int mask;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
"movli.l @%1, %0 ! set_bit \n\t"
- "or %3, %0 \n\t"
+ "or %2, %0 \n\t"
"movco.l %0, @%1 \n\t"
"bf 1b \n\t"
- : "=&z" (tmp), "=r" (a)
- : "1" (a), "r" (mask)
+ : "=&z" (tmp)
+ : "r" (a), "r" (mask)
: "t", "memory"
);
}
-static inline void clear_bit(int nr, volatile void * addr)
+static inline void clear_bit(int nr, volatile void *addr)
{
int mask;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
"movli.l @%1, %0 ! clear_bit \n\t"
- "and %3, %0 \n\t"
+ "and %2, %0 \n\t"
"movco.l %0, @%1 \n\t"
"bf 1b \n\t"
- : "=&z" (tmp), "=r" (a)
- : "1" (a), "r" (~mask)
+ : "=&z" (tmp)
+ : "r" (a), "r" (~mask)
: "t", "memory"
);
}
-static inline void change_bit(int nr, volatile void * addr)
+static inline void change_bit(int nr, volatile void *addr)
{
int mask;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
"movli.l @%1, %0 ! change_bit \n\t"
- "xor %3, %0 \n\t"
+ "xor %2, %0 \n\t"
"movco.l %0, @%1 \n\t"
"bf 1b \n\t"
- : "=&z" (tmp), "=r" (a)
- : "1" (a), "r" (mask)
+ : "=&z" (tmp)
+ : "r" (a), "r" (mask)
: "t", "memory"
);
}
-static inline int test_and_set_bit(int nr, volatile void * addr)
+static inline int test_and_set_bit(int nr, volatile void *addr)
{
int mask, retval;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! test_and_set_bit \n\t"
- "mov %0, %2 \n\t"
- "or %4, %0 \n\t"
- "movco.l %0, @%1 \n\t"
+ "movli.l @%2, %0 ! test_and_set_bit \n\t"
+ "mov %0, %1 \n\t"
+ "or %3, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
- "and %4, %2 \n\t"
- : "=&z" (tmp), "=r" (a), "=&r" (retval)
- : "1" (a), "r" (mask)
+ "and %3, %1 \n\t"
+ : "=&z" (tmp), "=&r" (retval)
+ : "r" (a), "r" (mask)
: "t", "memory"
);
return retval != 0;
}
-static inline int test_and_clear_bit(int nr, volatile void * addr)
+static inline int test_and_clear_bit(int nr, volatile void *addr)
{
int mask, retval;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! test_and_clear_bit \n\t"
- "mov %0, %2 \n\t"
- "and %5, %0 \n\t"
- "movco.l %0, @%1 \n\t"
+ "movli.l @%2, %0 ! test_and_clear_bit \n\t"
+ "mov %0, %1 \n\t"
+ "and %4, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
- "and %4, %2 \n\t"
+ "and %3, %1 \n\t"
"synco \n\t"
- : "=&z" (tmp), "=r" (a), "=&r" (retval)
- : "1" (a), "r" (mask), "r" (~mask)
+ : "=&z" (tmp), "=&r" (retval)
+ : "r" (a), "r" (mask), "r" (~mask)
: "t", "memory"
);
return retval != 0;
}
-static inline int test_and_change_bit(int nr, volatile void * addr)
+static inline int test_and_change_bit(int nr, volatile void *addr)
{
int mask, retval;
volatile unsigned int *a = addr;
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! test_and_change_bit \n\t"
- "mov %0, %2 \n\t"
- "xor %4, %0 \n\t"
- "movco.l %0, @%1 \n\t"
+ "movli.l @%2, %0 ! test_and_change_bit \n\t"
+ "mov %0, %1 \n\t"
+ "xor %3, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
- "and %4, %2 \n\t"
+ "and %3, %1 \n\t"
"synco \n\t"
- : "=&z" (tmp), "=r" (a), "=&r" (retval)
- : "1" (a), "r" (mask)
+ : "=&z" (tmp), "=&r" (retval)
+ : "r" (a), "r" (mask)
: "t", "memory"
);
void (*disable)(struct clk *clk);
void (*recalc)(struct clk *clk);
int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+ int (*set_parent)(struct clk *clk, struct clk *parent);
long (*round_rate)(struct clk *clk, unsigned long rate);
};
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! xchg_u32 \n\t"
- "mov %0, %2 \n\t"
- "mov %4, %0 \n\t"
- "movco.l %0, @%1 \n\t"
+ "movli.l @%2, %0 ! xchg_u32 \n\t"
+ "mov %0, %1 \n\t"
+ "mov %3, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
"synco \n\t"
- : "=&z"(tmp), "=r" (m), "=&r" (retval)
- : "1" (m), "r" (val)
+ : "=&z"(tmp), "=&r" (retval)
+ : "r" (m), "r" (val)
: "t", "memory"
);
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! xchg_u8 \n\t"
- "mov %0, %2 \n\t"
- "mov %4, %0 \n\t"
- "movco.l %0, @%1 \n\t"
+ "movli.l @%2, %0 ! xchg_u8 \n\t"
+ "mov %0, %1 \n\t"
+ "mov %3, %0 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
"synco \n\t"
- : "=&z"(tmp), "=r" (m), "=&r" (retval)
- : "1" (m), "r" (val & 0xff)
+ : "=&z"(tmp), "=&r" (retval)
+ : "r" (m), "r" (val & 0xff)
: "t", "memory"
);
__asm__ __volatile__ (
"1: \n\t"
- "movli.l @%1, %0 ! __cmpxchg_u32 \n\t"
- "mov %0, %2 \n\t"
- "cmp/eq %2, %4 \n\t"
+ "movli.l @%2, %0 ! __cmpxchg_u32 \n\t"
+ "mov %0, %1 \n\t"
+ "cmp/eq %1, %3 \n\t"
"bf 2f \n\t"
- "mov %5, %0 \n\t"
+ "mov %3, %0 \n\t"
"2: \n\t"
- "movco.l %0, @%1 \n\t"
+ "movco.l %0, @%2 \n\t"
"bf 1b \n\t"
"synco \n\t"
- : "=&z" (tmp), "=r" (m), "=&r" (retval)
- : "1" (m), "r" (old), "r" (new)
+ : "=&z" (tmp), "=&r" (retval)
+ : "r" (m), "r" (old), "r" (new)
: "t", "memory"
);
#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */
#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */
#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */
+#define CPU_HAS_PTEAEX 0x0200 /* PTE ASID Extension support */
#endif /* __ASM_SH_CPU_FEATURES_H */
--- /dev/null
+/*
+ * arch/sh/include/asm/dma-sh.h
+ *
+ * Copyright (C) 2000 Takashi YOSHII
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __DMA_SH_H
+#define __DMA_SH_H
+
+#include <asm/dma.h>
+#include <cpu/dma.h>
+
+/* DMAOR contorl: The DMAOR access size is different by CPU.*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define dmaor_read_reg(n) \
+ (n ? ctrl_inw(SH_DMAC_BASE1 + DMAOR) \
+ : ctrl_inw(SH_DMAC_BASE0 + DMAOR))
+#define dmaor_write_reg(n, data) \
+ (n ? ctrl_outw(data, SH_DMAC_BASE1 + DMAOR) \
+ : ctrl_outw(data, SH_DMAC_BASE0 + DMAOR))
+#else /* Other CPU */
+#define dmaor_read_reg(n) ctrl_inw(SH_DMAC_BASE0 + DMAOR)
+#define dmaor_write_reg(n, data) ctrl_outw(data, SH_DMAC_BASE0 + DMAOR)
+#endif
+
+static int dmte_irq_map[] __maybe_unused = {
+#if (MAX_DMA_CHANNELS >= 4)
+ DMTE0_IRQ,
+ DMTE0_IRQ + 1,
+ DMTE0_IRQ + 2,
+ DMTE0_IRQ + 3,
+#endif
+#if (MAX_DMA_CHANNELS >= 6)
+ DMTE4_IRQ,
+ DMTE4_IRQ + 1,
+#endif
+#if (MAX_DMA_CHANNELS >= 8)
+ DMTE6_IRQ,
+ DMTE6_IRQ + 1,
+#endif
+#if (MAX_DMA_CHANNELS >= 12)
+ DMTE8_IRQ,
+ DMTE9_IRQ,
+ DMTE10_IRQ,
+ DMTE11_IRQ,
+#endif
+};
+
+/* Definitions for the SuperH DMAC */
+#define REQ_L 0x00000000
+#define REQ_E 0x00080000
+#define RACK_H 0x00000000
+#define RACK_L 0x00040000
+#define ACK_R 0x00000000
+#define ACK_W 0x00020000
+#define ACK_H 0x00000000
+#define ACK_L 0x00010000
+#define DM_INC 0x00004000
+#define DM_DEC 0x00008000
+#define SM_INC 0x00001000
+#define SM_DEC 0x00002000
+#define RS_IN 0x00000200
+#define RS_OUT 0x00000300
+#define TS_BLK 0x00000040
+#define TM_BUR 0x00000020
+#define CHCR_DE 0x00000001
+#define CHCR_TE 0x00000002
+#define CHCR_IE 0x00000004
+
+/* DMAOR definitions */
+#define DMAOR_AE 0x00000004
+#define DMAOR_NMIF 0x00000002
+#define DMAOR_DME 0x00000001
+
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
+
+/* DMA base address */
+static u32 dma_base_addr[] __maybe_unused = {
+#if (MAX_DMA_CHANNELS >= 4)
+ SH_DMAC_BASE0 + 0x00, /* channel 0 */
+ SH_DMAC_BASE0 + 0x10,
+ SH_DMAC_BASE0 + 0x20,
+ SH_DMAC_BASE0 + 0x30,
+#endif
+#if (MAX_DMA_CHANNELS >= 6)
+ SH_DMAC_BASE0 + 0x50,
+ SH_DMAC_BASE0 + 0x60,
+#endif
+#if (MAX_DMA_CHANNELS >= 8)
+ SH_DMAC_BASE1 + 0x00,
+ SH_DMAC_BASE1 + 0x10,
+#endif
+#if (MAX_DMA_CHANNELS >= 12)
+ SH_DMAC_BASE1 + 0x20,
+ SH_DMAC_BASE1 + 0x30,
+ SH_DMAC_BASE1 + 0x50,
+ SH_DMAC_BASE1 + 0x60, /* channel 11 */
+#endif
+};
+
+/* DMA register */
+#define SAR 0x00
+#define DAR 0x04
+#define TCR 0x08
+#define CHCR 0x0C
+#define DMAOR 0x40
+
+#endif /* __DMA_SH_H */
#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000)
#ifdef CONFIG_NR_DMA_CHANNELS
-# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS)
+# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS)
#else
-# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS)
+# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS)
#endif
/*
#endif
.endm
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
+# define PREF(x) pref @x
+#else
+# define PREF(x) nop
+#endif
#include <cpu/gpio.h>
#endif
+#define ARCH_NR_GPIOS 512
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ WARN_ON(1);
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ WARN_ON(1);
+ return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
typedef unsigned short pinmux_enum_t;
-typedef unsigned char pinmux_flag_t;
+typedef unsigned short pinmux_flag_t;
#define PINMUX_TYPE_NONE 0
#define PINMUX_TYPE_FUNCTION 1
#define PINMUX_FLAG_WANT_PULLUP (1 << 3)
#define PINMUX_FLAG_WANT_PULLDOWN (1 << 4)
+#define PINMUX_FLAG_DBIT_SHIFT 5
+#define PINMUX_FLAG_DBIT (0x1f << PINMUX_FLAG_DBIT_SHIFT)
+#define PINMUX_FLAG_DREG_SHIFT 10
+#define PINMUX_FLAG_DREG (0x3f << PINMUX_FLAG_DREG_SHIFT)
+
struct pinmux_gpio {
pinmux_enum_t enum_id;
pinmux_flag_t flags;
.enum_ids = (pinmux_enum_t [(r_width / f_width) * (1 << f_width)]) \
struct pinmux_data_reg {
- unsigned long reg, reg_width;
+ unsigned long reg, reg_width, reg_shadow;
pinmux_enum_t *enum_ids;
};
unsigned int gpio_data_size;
unsigned long *gpio_in_use;
+ struct gpio_chip chip;
};
int register_pinmux(struct pinmux_info *pip);
-int __gpio_request(unsigned gpio);
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return __gpio_request(gpio);
-}
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-/* IRQ modes are unspported */
-static inline int gpio_to_irq(unsigned gpio)
-{
- WARN_ON(1);
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- WARN_ON(1);
- return -EINVAL;
-}
-
-#include <asm-generic/gpio.h>
-
#endif /* __ASM_SH_GPIO_H */
#include <asm/io_generic.h>
/* arch/sh/cchips/hd6446x/hd64461/setup.c */
-int hd64461_irq_demux(int irq);
void hd64461_register_irq_demux(int irq,
int (*demux) (int irq, void *dev), void *dev);
void hd64461_unregister_irq_demux(int irq);
static inline void __iomem *
__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
unsigned long last_addr = offset + size - 1;
#endif
void __iomem *ret;
if (ret)
return ret;
-#ifdef CONFIG_SUPERH32
+#if defined(CONFIG_SUPERH32) && !defined(CONFIG_PMB_FIXED)
/*
* For P1 and P2 space this is trivial, as everything is already
* mapped. Uncached access for P1 addresses are done through P2.
? (MAX_STACK_SIZE) \
: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
-#define regs_return_value(regs) ((regs)->regs[0])
+#define regs_return_value(_regs) ((_regs)->regs[0])
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
* (a) TLB cache version (or round, cycle whatever expression you like)
* (b) ASID (Address Space IDentifier)
*/
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMU_CONTEXT_ASID_MASK 0x0000ffff
+#else
#define MMU_CONTEXT_ASID_MASK 0x000000ff
-#define MMU_CONTEXT_VERSION_MASK 0xffffff00
-#define MMU_CONTEXT_FIRST_VERSION 0x00000100
-#define NO_CONTEXT 0UL
+#endif
-/* ASID is 8-bit value, so it can't be 0x100 */
-#define MMU_NO_ASID 0x100
+#define MMU_CONTEXT_VERSION_MASK (~0UL & ~MMU_CONTEXT_ASID_MASK)
+#define MMU_CONTEXT_FIRST_VERSION (MMU_CONTEXT_ASID_MASK + 1)
+
+/* Impossible ASID value, to differentiate from NO_CONTEXT. */
+#define MMU_NO_ASID MMU_CONTEXT_FIRST_VERSION
+#define NO_CONTEXT 0UL
#define asid_cache(cpu) (cpu_data[cpu].asid_cache)
/* Do nothing */
}
+#ifdef CONFIG_CPU_HAS_PTEAEX
+static inline void set_asid(unsigned long asid)
+{
+ __raw_writel(asid, MMU_PTEAEX);
+}
+
+static inline unsigned long get_asid(void)
+{
+ return __raw_readl(MMU_PTEAEX) & MMU_CONTEXT_ASID_MASK;
+}
+#else
static inline void set_asid(unsigned long asid)
{
unsigned long __dummy;
asid &= MMU_CONTEXT_ASID_MASK;
return asid;
}
+#endif /* CONFIG_CPU_HAS_PTEAEX */
/* MMU_TTB is used for optimizing the fault handling. */
static inline void set_TTB(pgd_t *pgd)
* is not visible (it is part of the PMB mapping) and so needs to be
* added or subtracted as required.
*/
-#ifdef CONFIG_32BIT
+#if defined(CONFIG_PMB_FIXED)
+/* phys = virt - PAGE_OFFSET - (__MEMORY_START & 0xe0000000) */
+#define PMB_OFFSET (PAGE_OFFSET - PXSEG(__MEMORY_START))
+#define __pa(x) ((unsigned long)(x) - PMB_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) + PMB_OFFSET))
+#elif defined(CONFIG_32BIT)
#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
#else
CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
- CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+ CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SH7786,
CPU_SH7723, CPU_SHX3,
/* SH4AL-DSP types */
/*
* Do necessary setup to start up a newly executed thread.
*/
-#define start_thread(regs, new_pc, new_sp) \
+#define start_thread(_regs, new_pc, new_sp) \
set_fs(USER_DS); \
- regs->pr = 0; \
- regs->sr = SR_FD; /* User mode. */ \
- regs->pc = new_pc; \
- regs->regs[15] = new_sp
+ _regs->pr = 0; \
+ _regs->sr = SR_FD; /* User mode. */ \
+ _regs->pc = new_pc; \
+ _regs->regs[15] = new_sp
/* Forward declaration, a strange C thing */
struct task_struct;
#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc)
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15])
-#define user_stack_pointer(regs) ((regs)->regs[15])
+#define user_stack_pointer(_regs) ((_regs)->regs[15])
-#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
- defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
#define PREFETCH_STRIDE L1_CACHE_BYTES
#define ARCH_HAS_PREFETCH
#define ARCH_HAS_PREFETCHW
*/
#define SR_USER (SR_MMU | SR_FD)
-#define start_thread(regs, new_pc, new_sp) \
+#define start_thread(_regs, new_pc, new_sp) \
set_fs(USER_DS); \
- regs->sr = SR_USER; /* User mode. */ \
- regs->pc = new_pc - 4; /* Compensate syscall exit */ \
- regs->pc |= 1; /* Set SHmedia ! */ \
- regs->regs[18] = 0; \
- regs->regs[15] = new_sp
+ _regs->sr = SR_USER; /* User mode. */ \
+ _regs->pc = new_pc - 4; /* Compensate syscall exit */ \
+ _regs->pc |= 1; /* Set SHmedia ! */ \
+ _regs->regs[18] = 0; \
+ _regs->regs[15] = new_sp
/* Forward declaration, a strange C thing */
struct task_struct;
#define KSTK_EIP(tsk) ((tsk)->thread.pc)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-#define user_stack_pointer(regs) ((regs)->regs[15])
+#define user_stack_pointer(_regs) ((_regs)->regs[15])
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_PROCESSOR_64_H */
#ifdef CONFIG_SH_DSP
#define task_pt_regs(task) \
((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
- - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+ - sizeof(struct pt_dspregs)) - 1)
#define task_pt_dspregs(task) \
- ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE \
- - sizeof(unsigned long)) - 1)
+ ((struct pt_dspregs *) (task_stack_page(task) + THREAD_SIZE) - 1)
#else
#define task_pt_regs(task) \
- ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
- - sizeof(unsigned long)) - 1)
+ ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE) - 1)
#endif
static inline unsigned long profile_pc(struct pt_regs *regs)
#include <asm-generic/sections.h>
+extern void __nosave_begin, __nosave_end;
extern long __machvec_start, __machvec_end;
extern char __uncached_start, __uncached_end;
extern char _ebss[];
--- /dev/null
+#ifndef _ASM_SH_SUSPEND_H
+#define _ASM_SH_SUSPEND_H
+
+#ifndef __ASSEMBLY__
+static inline int arch_prepare_suspend(void) { return 0; }
+
+#include <asm/ptrace.h>
+
+struct swsusp_arch_regs {
+ struct pt_regs user_regs;
+ unsigned long bank1_regs[8];
+};
+#endif
+
+/* flags passed to assembly suspend code */
+#define SUSP_SH_SLEEP (1 << 0) /* Regular sleep mode */
+#define SUSP_SH_STANDBY (1 << 1) /* SH-Mobile Software standby mode */
+#define SUSP_SH_RSTANDBY (1 << 2) /* SH-Mobile R-standby mode */
+#define SUSP_SH_USTANDBY (1 << 3) /* SH-Mobile U-standby mode */
+#define SUSP_SH_SF (1 << 4) /* Enable self-refresh */
+
+#endif /* _ASM_SH_SUSPEND_H */
int (*init)(void);
int (*start)(void);
int (*stop)(void);
- cycle_t (*read)(void);
#ifndef CONFIG_GENERIC_TIME
unsigned long (*get_offset)(void);
#endif
/* arch/sh/kernel/time.c */
void handle_timer_tick(void);
-extern unsigned long sh_hpt_frequency;
+
+extern struct clocksource clocksource_sh;
#endif /* __ASM_SH_TIMER_H */
#endif
#ifndef __ASSEMBLY__
+#include <linux/pagemap.h>
+
+#ifdef CONFIG_MMU
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+
+/*
+ * TLB handling. This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+ struct mm_struct *mm;
+ unsigned int fullmm;
+ unsigned long start, end;
+};
-#define tlb_start_vma(tlb, vma) \
- flush_cache_range(vma, vma->vm_start, vma->vm_end)
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
-#define tlb_end_vma(tlb, vma) \
- flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+static inline void init_tlb_gather(struct mmu_gather *tlb)
+{
+ tlb->start = TASK_SIZE;
+ tlb->end = 0;
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+ if (tlb->fullmm) {
+ tlb->start = 0;
+ tlb->end = TASK_SIZE;
+ }
+}
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+ struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+ tlb->mm = mm;
+ tlb->fullmm = full_mm_flush;
+
+ init_tlb_gather(tlb);
+
+ return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+ if (tlb->fullmm)
+ flush_tlb_mm(tlb->mm);
+
+ /* keep the page table cache within bounds */
+ check_pgt_cache();
+
+ put_cpu_var(mmu_gathers);
+}
+
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+ if (tlb->start > address)
+ tlb->start = address;
+ if (tlb->end < address + PAGE_SIZE)
+ tlb->end = address + PAGE_SIZE;
+}
/*
- * Flush whole TLBs for MM
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush. When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
*/
-#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+ if (!tlb->fullmm)
+ flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+ if (!tlb->fullmm && tlb->end) {
+ flush_tlb_range(vma, tlb->start, tlb->end);
+ init_tlb_gather(tlb);
+ }
+}
+
+#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb, ptep) pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp) pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp) pud_free((tlb)->mm, pudp)
+
+#define tlb_migrate_finish(mm) do { } while (0)
+
+#else /* CONFIG_MMU */
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+#define tlb_flush(tlb) do { } while (0)
-#include <linux/pagemap.h>
#include <asm-generic/tlb.h>
+#endif /* CONFIG_MMU */
#endif /* __ASSEMBLY__ */
#endif /* __ASM_SH_TLB_H */
#ifndef __ASM_CPU_SH3_DMA_H
#define __ASM_CPU_SH3_DMA_H
-
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721)
-#define SH_DMAC_BASE 0xa4010020
-#else
-#define SH_DMAC_BASE 0xa4000020
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SH_DMAC_BASE0 0xa4010020
+#else /* SH7705/06/07/09 */
+#define SH_DMAC_BASE0 0xa4000020
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#define DMTE0_IRQ 48
-#define DMTE1_IRQ 49
-#define DMTE2_IRQ 50
-#define DMTE3_IRQ 51
#define DMTE4_IRQ 76
-#define DMTE5_IRQ 77
-#endif
/* Definitions for the SuperH DMAC */
#define TM_BURST 0x00000020
--- /dev/null
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7730)
+#define DMTE0_IRQ 48
+#define DMTE4_IRQ 76
+#define DMAE0_IRQ 78 /* DMA Error IRQ*/
+#define SH_DMAC_BASE0 0xFE008020
+#define SH_DMARS_BASE 0xFE009000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7764)
+#define DMTE0_IRQ 34
+#define DMTE4_IRQ 44
+#define DMAE0_IRQ 38
+#define SH_DMAC_BASE0 0xFF608020
+#define SH_DMARS_BASE 0xFF609000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define DMTE0_IRQ 48 /* DMAC0A*/
+#define DMTE4_IRQ 40 /* DMAC0B */
+#define DMTE6_IRQ 42
+#define DMTE8_IRQ 76 /* DMAC1A */
+#define DMTE9_IRQ 77
+#define DMTE10_IRQ 72 /* DMAC1B */
+#define DMTE11_IRQ 73
+#define DMAE0_IRQ 78 /* DMA Error IRQ*/
+#define DMAE1_IRQ 74 /* DMA Error IRQ*/
+#define SH_DMAC_BASE0 0xFE008020
+#define SH_DMAC_BASE1 0xFDC08020
+#define SH_DMARS_BASE 0xFDC09000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define DMTE0_IRQ 34
+#define DMTE4_IRQ 44
+#define DMTE6_IRQ 46
+#define DMTE8_IRQ 92
+#define DMTE9_IRQ 93
+#define DMTE10_IRQ 94
+#define DMTE11_IRQ 95
+#define DMAE0_IRQ 38 /* DMA Error IRQ */
+#define SH_DMAC_BASE0 0xFC808020
+#define SH_DMAC_BASE1 0xFC818020
+#define SH_DMARS_BASE 0xFC809000
+#else /* SH7785 */
+#define DMTE0_IRQ 33
+#define DMTE4_IRQ 37
+#define DMTE6_IRQ 52
+#define DMTE8_IRQ 54
+#define DMTE9_IRQ 55
+#define DMTE10_IRQ 56
+#define DMTE11_IRQ 57
+#define DMAE0_IRQ 39 /* DMA Error IRQ0 */
+#define DMAE1_IRQ 58 /* DMA Error IRQ1 */
+#define SH_DMAC_BASE0 0xFC808020
+#define SH_DMAC_BASE1 0xFCC08020
+#define SH_DMARS_BASE 0xFC809000
+#endif
+
+#define REQ_HE 0x000000C0
+#define REQ_H 0x00000080
+#define REQ_LE 0x00000040
+#define TM_BURST 0x0000020
+#define TS_8 0x00000000
+#define TS_16 0x00000008
+#define TS_32 0x00000010
+#define TS_16BLK 0x00000018
+#define TS_32BLK 0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_128BIT,
+ XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_128BIT] = 4,
+ [XMIT_SZ_256BIT] = 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
+++ /dev/null
-#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
-#define __ASM_SH_CPU_SH4_DMA_SH7780_H
-
-#define REQ_HE 0x000000C0
-#define REQ_H 0x00000080
-#define REQ_LE 0x00000040
-#define TM_BURST 0x0000020
-#define TS_8 0x00000000
-#define TS_16 0x00000008
-#define TS_32 0x00000010
-#define TS_16BLK 0x00000018
-#define TS_32BLK 0x00100000
-
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_128BIT,
- XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] __maybe_unused = {
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_128BIT] = 4,
- [XMIT_SZ_256BIT] = 5,
-};
-
-#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
#ifndef __ASM_CPU_SH4_DMA_H
#define __ASM_CPU_SH4_DMA_H
-#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
-
/* SH7751/7760/7780 DMA IRQ sources */
-#define DMTE0_IRQ 34
-#define DMTE1_IRQ 35
-#define DMTE2_IRQ 36
-#define DMTE3_IRQ 37
-#define DMTE4_IRQ 44
-#define DMTE5_IRQ 45
-#define DMTE6_IRQ 46
-#define DMTE7_IRQ 47
-#define DMAE_IRQ 38
#ifdef CONFIG_CPU_SH4A
-#define SH_DMAC_BASE 0xfc808020
+#define DMAOR_INIT (DMAOR_DME)
#define CHCR_TS_MASK 0x18
#define CHCR_TS_SHIFT 3
-#include <cpu/dma-sh7780.h>
-#else
-#define SH_DMAC_BASE 0xffa00000
+#include <cpu/dma-sh4a.h>
+#else /* CONFIG_CPU_SH4A */
+/*
+ * SH7750/SH7751/SH7760
+ */
+#define DMTE0_IRQ 34
+#define DMTE4_IRQ 44
+#define DMTE6_IRQ 46
+#define DMAE0_IRQ 38
+#define DMAOR_INIT (0x8000|DMAOR_DME)
+#define SH_DMAC_BASE0 0xffa00000
+#define SH_DMAC_BASE1 0xffa00070
/* Definitions for the SuperH DMAC */
-#define TM_BURST 0x0000080
+#define TM_BURST 0x00000080
#define TS_8 0x00000010
#define TS_16 0x00000020
#define TS_32 0x00000030
#define FRQCR0 0xffc80000
#define FRQCR1 0xffc80004
#define FRQMR1 0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SH7786)
+#define FRQCR0 0xffc40000
+#define FRQCR1 0xffc40004
+#define FRQMR1 0xffc40014
#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
#define FRQCR 0xffc00014
#else
#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */
#define MMU_TTB 0xFF000008 /* Translation table base register */
#define MMU_TEA 0xFF00000C /* TLB Exception Address */
-#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */
+#define MMU_PTEA 0xFF000034 /* PTE assistance register */
+#define MMU_PTEAEX 0xFF00007C /* PTE ASID extension register */
#define MMUCR 0xFF000010 /* MMU Control Register */
-#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000
#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000
+#define MMU_UTLB_ADDRESS_ARRAY2 0xF6800000
#define MMU_PAGE_ASSOC_BIT 0x80
#define MMUCR_TI (1<<2)
-#ifdef CONFIG_X2TLB
-#define MMUCR_ME (1 << 7)
-#else
-#define MMUCR_ME (0)
-#endif
-
#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
#define MMUCR_SE (1 << 4)
#else
#define MMUCR_SE (0)
#endif
+#ifdef CONFIG_CPU_HAS_PTEAEX
+#define MMUCR_AEX (1 << 6)
+#else
+#define MMUCR_AEX (0)
+#endif
+
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME (1 << 7)
+#else
+#define MMUCR_ME (0)
+#endif
+
#ifdef CONFIG_SH_STORE_QUEUES
#define MMUCR_SQMD (1 << 9)
#else
#endif
#define MMU_NTLB_ENTRIES 64
-#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE)
-
-#define MMU_ITLB_DATA_ARRAY 0xF3000000
-#define MMU_UTLB_DATA_ARRAY 0xF7000000
-
-#define MMU_UTLB_ENTRIES 64
-#define MMU_U_ENTRY_SHIFT 8
-#define MMU_UTLB_VALID 0x100
-#define MMU_ITLB_ENTRIES 4
-#define MMU_I_ENTRY_SHIFT 8
-#define MMU_ITLB_VALID 0x100
+#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE|MMUCR_AEX)
#define TRA 0xff000020
#define EXPEVT 0xff000024
--- /dev/null
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on sh7785.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __CPU_SH7786_H__
+#define __CPU_SH7786_H__
+
+enum {
+ /* PA */
+ GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+ GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+ /* PB */
+ GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+ GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+ /* PC */
+ GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+ GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+ /* PD */
+ GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+ GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+ /* PE */
+ GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2,
+ GPIO_PE1, GPIO_PE0,
+
+ /* PF */
+ GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+ GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+ /* PG */
+ GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+ GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+ /* PH */
+ GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4,
+ GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+ /* PJ */
+ GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4,
+ GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0,
+
+ GPIO_FN_CDE,
+ GPIO_FN_ETH_MAGIC,
+ GPIO_FN_DISP,
+ GPIO_FN_ETH_LINK,
+ GPIO_FN_DR5,
+ GPIO_FN_ETH_TX_ER,
+ GPIO_FN_DR4,
+ GPIO_FN_ETH_TX_EN,
+ GPIO_FN_DR3,
+ GPIO_FN_ETH_TXD3,
+ GPIO_FN_DR2,
+ GPIO_FN_ETH_TXD2,
+ GPIO_FN_DR1,
+ GPIO_FN_ETH_TXD1,
+ GPIO_FN_DR0,
+ GPIO_FN_ETH_TXD0,
+ GPIO_FN_VSYNC,
+ GPIO_FN_HSPI_CLK,
+ GPIO_FN_ODDF,
+ GPIO_FN_HSPI_CS,
+ GPIO_FN_DG5,
+ GPIO_FN_ETH_MDIO,
+ GPIO_FN_DG4,
+ GPIO_FN_ETH_RX_CLK,
+ GPIO_FN_DG3,
+ GPIO_FN_ETH_MDC,
+ GPIO_FN_DG2,
+ GPIO_FN_ETH_COL,
+ GPIO_FN_DG1,
+ GPIO_FN_ETH_TX_CLK,
+ GPIO_FN_DG0,
+ GPIO_FN_ETH_CRS,
+ GPIO_FN_DCLKIN,
+ GPIO_FN_HSPI_RX,
+ GPIO_FN_HSYNC,
+ GPIO_FN_HSPI_TX,
+ GPIO_FN_DB5,
+ GPIO_FN_ETH_RXD3,
+ GPIO_FN_DB4,
+ GPIO_FN_ETH_RXD2,
+ GPIO_FN_DB3,
+ GPIO_FN_ETH_RXD1,
+ GPIO_FN_DB2,
+ GPIO_FN_ETH_RXD0,
+ GPIO_FN_DB1,
+ GPIO_FN_ETH_RX_DV,
+ GPIO_FN_DB0,
+ GPIO_FN_ETH_RX_ER,
+ GPIO_FN_DCLKOUT,
+ GPIO_FN_SCIF1_SLK,
+ GPIO_FN_SCIF1_RXD,
+ GPIO_FN_SCIF1_TXD,
+ GPIO_FN_DACK1,
+ GPIO_FN_BACK,
+ GPIO_FN_FALE,
+ GPIO_FN_DACK0,
+ GPIO_FN_FCLE,
+ GPIO_FN_DREQ1,
+ GPIO_FN_BREQ,
+ GPIO_FN_USB_OVC1,
+ GPIO_FN_DREQ0,
+ GPIO_FN_USB_OVC0,
+ GPIO_FN_USB_PENC1,
+ GPIO_FN_USB_PENC0,
+ GPIO_FN_HAC1_SDOUT,
+ GPIO_FN_SSI1_SDATA,
+ GPIO_FN_SDIF1CMD,
+ GPIO_FN_HAC1_SDIN,
+ GPIO_FN_SSI1_SCK,
+ GPIO_FN_SDIF1CD,
+ GPIO_FN_HAC1_SYNC,
+ GPIO_FN_SSI1_WS,
+ GPIO_FN_SDIF1WP,
+ GPIO_FN_HAC1_BITCLK,
+ GPIO_FN_SSI1_CLK,
+ GPIO_FN_SDIF1CLK,
+ GPIO_FN_HAC0_SDOUT,
+ GPIO_FN_SSI0_SDATA,
+ GPIO_FN_SDIF1D3,
+ GPIO_FN_HAC0_SDIN,
+ GPIO_FN_SSI0_SCK,
+ GPIO_FN_SDIF1D2,
+ GPIO_FN_HAC0_SYNC,
+ GPIO_FN_SSI0_WS,
+ GPIO_FN_SDIF1D1,
+ GPIO_FN_HAC0_BITCLK,
+ GPIO_FN_SSI0_CLK,
+ GPIO_FN_SDIF1D0,
+ GPIO_FN_SCIF3_SCK,
+ GPIO_FN_SSI2_SDATA,
+ GPIO_FN_SCIF3_RXD,
+ GPIO_FN_TCLK,
+ GPIO_FN_SSI2_SCK,
+ GPIO_FN_SCIF3_TXD,
+ GPIO_FN_HAC_RES,
+ GPIO_FN_SSI2_WS,
+ GPIO_FN_DACK3,
+ GPIO_FN_SDIF0CMD,
+ GPIO_FN_DACK2,
+ GPIO_FN_SDIF0CD,
+ GPIO_FN_DREQ3,
+ GPIO_FN_SDIF0WP,
+ GPIO_FN_SCIF0_CTS,
+ GPIO_FN_DREQ2,
+ GPIO_FN_SDIF0CLK,
+ GPIO_FN_SCIF0_RTS,
+ GPIO_FN_IRL7,
+ GPIO_FN_SDIF0D3,
+ GPIO_FN_SCIF0_SCK,
+ GPIO_FN_IRL6,
+ GPIO_FN_SDIF0D2,
+ GPIO_FN_SCIF0_RXD,
+ GPIO_FN_IRL5,
+ GPIO_FN_SDIF0D1,
+ GPIO_FN_SCIF0_TXD,
+ GPIO_FN_IRL4,
+ GPIO_FN_SDIF0D0,
+ GPIO_FN_SCIF5_SCK,
+ GPIO_FN_FRB,
+ GPIO_FN_SCIF5_RXD,
+ GPIO_FN_IOIS16,
+ GPIO_FN_SCIF5_TXD,
+ GPIO_FN_CE2B,
+ GPIO_FN_DRAK3,
+ GPIO_FN_CE2A,
+ GPIO_FN_SCIF4_SCK,
+ GPIO_FN_DRAK2,
+ GPIO_FN_SSI3_WS,
+ GPIO_FN_SCIF4_RXD,
+ GPIO_FN_DRAK1,
+ GPIO_FN_SSI3_SDATA,
+ GPIO_FN_FSTATUS,
+ GPIO_FN_SCIF4_TXD,
+ GPIO_FN_DRAK0,
+ GPIO_FN_SSI3_SCK,
+ GPIO_FN_FSE,
+};
+
+#endif /* __CPU_SH7786_H__ */
--- /dev/null
+#ifndef __MACH_URQUELL_H
+#define __MACH_URQUELL_H
+
+/*
+ * ------ 0x00000000 ------------------------------------
+ * CS0 | (SW1,SW47) EEPROM, SRAM, NOR FLASH
+ * -----+ 0x04000000 ------------------------------------
+ * CS1 | (SW47) SRAM, SRAM-LAN-PCMCIA, NOR FLASH
+ * -----+ 0x08000000 ------------------------------------
+ * CS2 | DDR3
+ * CS3 |
+ * -----+ 0x10000000 ------------------------------------
+ * CS4 | PCIe
+ * -----+ 0x14000000 ------------------------------------
+ * CS5 | (SW47) LRAM/URAM, SRAM-LAN-PCMCIA
+ * -----+ 0x18000000 ------------------------------------
+ * CS6 | ATA, NAND FLASH
+ * -----+ 0x1c000000 ------------------------------------
+ * CS7 | SH7786 register
+ * -----+------------------------------------------------
+ */
+
+#define NOR_FLASH_ADDR 0x00000000
+#define NOR_FLASH_SIZE 0x04000000
+
+#define CS1_BASE 0x05000000
+#define CS5_BASE 0x15000000
+#define FPGA_BASE CS1_BASE
+
+#define BOARDREG(ofs) (FPGA_BASE + ofs##_OFS)
+#define UBOARDREG(ofs) (0xa0000000 + FPGA_BASE + ofs##_OFS)
+
+#define SRSTR_OFS 0x0000 /* System reset register */
+#define BDMR_OFS 0x0010 /* Board operating mode resister */
+#define IRL0SR_OFS 0x0020 /* IRL0 Status register */
+#define IRL0MSKR_OFS 0x0030 /* IRL0 Mask register */
+#define IRL1SR_OFS 0x0040 /* IRL1 Status register */
+#define IRL1MSKR_OFS 0x0050 /* IRL1 Mask register */
+#define IRL2SR_OFS 0x0060 /* IRL2 Status register */
+#define IRL2MSKR_OFS 0x0070 /* IRL2 Mask register */
+#define IRL3SR_OFS 0x0080 /* IRL3 Status register */
+#define IRL3MSKR_OFS 0x0090 /* IRL3 Mask register */
+#define SOFTINTR_OFS 0x0120 /* Softwear Interrupt register */
+#define SLEDR_OFS 0x0130 /* LED control resister */
+#define MAPSCIFSWR_OFS 0x0140 /* Map/SCIF Switch register */
+#define FPVERR_OFS 0x0150 /* FPGA Version register */
+#define FPDATER_OFS 0x0160 /* FPGA Date register */
+#define FPYEARR_OFS 0x0170 /* FPGA Year register */
+#define TCLKCR_OFS 0x0180 /* TCLK Control register */
+#define DIPSWMR_OFS 0x1000 /* DIPSW monitor register */
+#define FPODR_OFS 0x1010 /* Output port data register */
+#define ATACNR_OFS 0x1020 /* ATA-CN Control/status register */
+#define FPINDR_OFS 0x1030 /* Input port data register */
+#define MDSWMR_OFS 0x1040 /* MODE SW monitor register */
+#define DDR3BUPCR_OFS 0x1050 /* DDR3 Backup control register */
+#define SSICODECCR_OFS 0x1060 /* SSI-CODEC control register */
+#define PCIESLOTSR_OFS 0x1070 /* PCIexpress Slot status register */
+#define ETHERPORTSR_OFS 0x1080 /* EtherPhy Port status register */
+#define LATCHCR_OFS 0x3000 /* Latch control register */
+#define LATCUAR_OFS 0x3010 /* Latch upper address register */
+#define LATCLAR_OFS 0x3012 /* Latch lower address register */
+#define LATCLUDR_OFS 0x3024 /* Latch D31-16 register */
+#define LATCLLDR_OFS 0x3026 /* Latch D15-0 register */
+
+#define CHARLED_OFS 0x2000 /* Character LED */
+
+#endif /* __MACH_URQUELL_H */
+
obj-$(CONFIG_GENERIC_GPIO) += gpio.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_DUMP_CODE) += disassemble.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
EXTRA_CFLAGS += -Werror
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/kbuild.h>
+#include <linux/suspend.h>
#include <asm/thread_info.h>
+#include <asm/suspend.h>
int main(void)
{
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_RESTART_BLOCK,offsetof(struct thread_info, restart_block));
+#ifdef CONFIG_HIBERNATION
+ DEFINE(PBE_ADDRESS, offsetof(struct pbe, address));
+ DEFINE(PBE_ORIG_ADDRESS, offsetof(struct pbe, orig_address));
+ DEFINE(PBE_NEXT, offsetof(struct pbe, next));
+ DEFINE(SWSUSP_ARCH_REGS_SIZE, sizeof(struct swsusp_arch_regs));
+#endif
return 0;
}
# Special cases for family ancestry.
obj-$(CONFIG_CPU_SH4A) += sh4a/
+obj-$(CONFIG_ARCH_SHMOBILE) += shmobile/
# Common interfaces.
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/kref.h>
+#include <linux/kobject.h>
+#include <linux/sysdev.h>
#include <linux/seq_file.h>
#include <linux/err.h>
#include <linux/platform_device.h>
}
EXPORT_SYMBOL_GPL(clk_recalc_rate);
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ int ret = -EINVAL;
+ struct clk *old;
+
+ if (!parent || !clk)
+ return ret;
+
+ old = clk->parent;
+ if (likely(clk->ops && clk->ops->set_parent)) {
+ unsigned long flags;
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = clk->ops->set_parent(clk, parent);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ clk->parent = (ret ? old : parent);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_parent);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return clk->parent;
+}
+EXPORT_SYMBOL_GPL(clk_get_parent);
+
long clk_round_rate(struct clk *clk, unsigned long rate)
{
if (likely(clk->ops && clk->ops->round_rate)) {
return p - buf;
}
+#ifdef CONFIG_PM
+static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
+{
+ static pm_message_t prev_state;
+ struct clk *clkp;
+
+ switch (state.event) {
+ case PM_EVENT_ON:
+ /* Resumeing from hibernation */
+ if (prev_state.event == PM_EVENT_FREEZE) {
+ list_for_each_entry(clkp, &clock_list, node)
+ if (likely(clkp->ops)) {
+ unsigned long rate = clkp->rate;
+
+ if (likely(clkp->ops->set_parent))
+ clkp->ops->set_parent(clkp,
+ clkp->parent);
+ if (likely(clkp->ops->set_rate))
+ clkp->ops->set_rate(clkp,
+ rate, NO_CHANGE);
+ else if (likely(clkp->ops->recalc))
+ clkp->ops->recalc(clkp);
+ }
+ }
+ break;
+ case PM_EVENT_FREEZE:
+ break;
+ case PM_EVENT_SUSPEND:
+ break;
+ }
+
+ prev_state = state;
+ return 0;
+}
+
+static int clks_sysdev_resume(struct sys_device *dev)
+{
+ return clks_sysdev_suspend(dev, PMSG_ON);
+}
+
+static struct sysdev_class clks_sysdev_class = {
+ .name = "clks",
+};
+
+static struct sysdev_driver clks_sysdev_driver = {
+ .suspend = clks_sysdev_suspend,
+ .resume = clks_sysdev_resume,
+};
+
+static struct sys_device clks_sysdev_dev = {
+ .cls = &clks_sysdev_class,
+};
+
+static int __init clk_sysdev_init(void)
+{
+ sysdev_class_register(&clks_sysdev_class);
+ sysdev_driver_register(&clks_sysdev_class, &clks_sysdev_driver);
+ sysdev_register(&clks_sysdev_dev);
+
+ return 0;
+}
+subsys_initcall(clk_sysdev_init);
+#endif
+
int __init clk_init(void)
{
int i, ret = 0;
* SH7619 Setup
*
* Copyright (C) 2006 Yoshinori Sato
+ * Copyright (C) 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
WDT, EDMAC, CMT0, CMT1,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ SCIF0, SCIF1, SCIF2,
HIF_HIFI, HIF_HIFBI,
DMAC0, DMAC1, DMAC2, DMAC3,
SIOF,
-
- /* interrupt groups */
- SCIF0, SCIF1, SCIF2,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
- INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89),
- INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91),
- INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93),
- INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95),
- INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97),
- INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99),
+ INTC_IRQ(SCIF0, 88), INTC_IRQ(SCIF0, 89),
+ INTC_IRQ(SCIF0, 90), INTC_IRQ(SCIF0, 91),
+ INTC_IRQ(SCIF1, 92), INTC_IRQ(SCIF1, 93),
+ INTC_IRQ(SCIF1, 94), INTC_IRQ(SCIF1, 95),
+ INTC_IRQ(SCIF2, 96), INTC_IRQ(SCIF2, 97),
+ INTC_IRQ(SCIF2, 98), INTC_IRQ(SCIF2, 99),
INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
INTC_IRQ(SIOF, 108),
};
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
-};
-
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
{ 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
{ 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
};
-static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
NULL, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
.mapbase = 0xf8400000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 88, 89, 91, 90},
+ .irqs = { 88, 88, 88, 88 },
}, {
.mapbase = 0xf8410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 92, 93, 95, 94},
+ .irqs = { 92, 92, 92, 92 },
}, {
.mapbase = 0xf8420000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 96, 97, 99, 98},
+ .irqs = { 96, 96, 96, 96 },
}, {
.flags = 0,
}
/*
* Renesas MX-G (R8A03022BG) Setup
*
- * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008, 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
-
SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+ SCIF0, SCIF1,
- MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
- MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
- MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
- MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
- MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
- MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
- MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+ MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+ MTU2_TGI3B, MTU2_TGI3C,
/* interrupt groups */
- PINT, SCIF0, SCIF1,
- MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+ PINT,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
- INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221),
- INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223),
- INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225),
- INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227),
+ INTC_IRQ(SCIF0, 220), INTC_IRQ(SCIF0, 221),
+ INTC_IRQ(SCIF0, 222), INTC_IRQ(SCIF0, 223),
+ INTC_IRQ(SCIF1, 224), INTC_IRQ(SCIF1, 225),
+ INTC_IRQ(SCIF1, 226), INTC_IRQ(SCIF1, 227),
- INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229),
- INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231),
- INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233),
+ INTC_IRQ(MTU2_GROUP1, 228), INTC_IRQ(MTU2_GROUP1, 229),
+ INTC_IRQ(MTU2_GROUP1, 230), INTC_IRQ(MTU2_GROUP1, 231),
+ INTC_IRQ(MTU2_GROUP1, 232), INTC_IRQ(MTU2_GROUP1, 233),
- INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235),
- INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237),
- INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239),
+ INTC_IRQ(MTU2_GROUP2, 234), INTC_IRQ(MTU2_GROUP2, 235),
+ INTC_IRQ(MTU2_GROUP2, 236), INTC_IRQ(MTU2_GROUP2, 237),
+ INTC_IRQ(MTU2_GROUP2, 238), INTC_IRQ(MTU2_GROUP2, 239),
- INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241),
- INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243),
+ INTC_IRQ(MTU2_GROUP3, 240), INTC_IRQ(MTU2_GROUP3, 241),
+ INTC_IRQ(MTU2_GROUP3, 242), INTC_IRQ(MTU2_GROUP3, 243),
INTC_IRQ(MTU2_TGI3B, 244),
INTC_IRQ(MTU2_TGI3C, 245),
- INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247),
- INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249),
- INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251),
+ INTC_IRQ(MTU2_GROUP4, 246), INTC_IRQ(MTU2_GROUP4, 247),
+ INTC_IRQ(MTU2_GROUP4, 248), INTC_IRQ(MTU2_GROUP4, 249),
+ INTC_IRQ(MTU2_GROUP4, 250), INTC_IRQ(MTU2_GROUP4, 251),
- INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253),
- INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255),
+ INTC_IRQ(MTU2_GROUP5, 252), INTC_IRQ(MTU2_GROUP5, 253),
+ INTC_IRQ(MTU2_GROUP5, 254), INTC_IRQ(MTU2_GROUP5, 255),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
- MTU2_TCI0V, MTU2_TGI0E),
- INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B,
- MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A),
- INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
- MTU2_TGI3A),
- INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A,
- MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
- INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
};
static struct intc_prio_reg prio_registers[] __initdata = {
.mapbase = 0xff804000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 223, 220, 221, 222 },
+ .irqs = { 220, 220, 220, 220 },
}, {
.flags = 0,
}
* SH7201 setup
*
* Copyright (C) 2008 Peter Griffin pgriffin@mpc-data.co.uk
+ * Copyright (C) 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
ADC_ADI,
- MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
- MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
- MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
- MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
- MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
- MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
- MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
- RTC_ARM, RTC_PRD, RTC_CUP,
- WDT,
- IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
- IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
- IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
+
+ MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
+ MTU23_ABCD, MTU24_ABCD, MTU25_UVW, MTU2_TCI3V, MTU2_TCI4V,
+
+ RTC, WDT,
+
+ IIC30, IIC31, IIC32,
DMAC0_DMINT0, DMAC1_DMINT1,
DMAC2_DMINT2, DMAC3_DMINT3,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI,
- SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI,
- SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI,
- SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI,
+ SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
DMAC0_DMINTA, DMAC4_DMINT4, DMAC5_DMINT5, DMAC6_DMINT6,
DMAC7_DMINT7,
- RCAN0_ERS, RCAN0_OVR,
- RCAN0_SLE,
- RCAN0_RM0, RCAN0_RM1,
-
- RCAN1_ERS, RCAN1_OVR,
- RCAN1_SLE,
- RCAN1_RM0, RCAN1_RM1,
+ RCAN0, RCAN1,
SSI0_SSII, SSI1_SSII,
- TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0,
- TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1,
+ TMR0, TMR1,
/* interrupt groups */
-
- IRQ, PINT, ADC,
- MTU20_ABCD, MTU20_VEF, MTU21_AB, MTU21_VU, MTU22_AB, MTU22_VU,
- MTU23_ABCD, MTU24_ABCD, MTU25_UVW,
- RTC, IIC30, IIC31, IIC32,
- SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7,
- RCAN0, RCAN1, TMR0, TMR1
-
+ PINT,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+
INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
INTC_IRQ(ADC_ADI, 92),
- INTC_IRQ(MTU2_TGI0A, 108), INTC_IRQ(MTU2_TGI0B, 109),
- INTC_IRQ(MTU2_TGI0C, 110), INTC_IRQ(MTU2_TGI0D, 111),
- INTC_IRQ(MTU2_TCI0V, 112),
- INTC_IRQ(MTU2_TGI0E, 113), INTC_IRQ(MTU2_TGI0F, 114),
+ INTC_IRQ(MTU20_ABCD, 108), INTC_IRQ(MTU20_ABCD, 109),
+ INTC_IRQ(MTU20_ABCD, 110), INTC_IRQ(MTU20_ABCD, 111),
+
+ INTC_IRQ(MTU20_VEF, 112), INTC_IRQ(MTU20_VEF, 113),
+ INTC_IRQ(MTU20_VEF, 114),
+
+ INTC_IRQ(MTU21_AB, 116), INTC_IRQ(MTU21_AB, 117),
+ INTC_IRQ(MTU21_VU, 120), INTC_IRQ(MTU21_VU, 121),
- INTC_IRQ(MTU2_TGI1A, 116), INTC_IRQ(MTU2_TGI1B, 117),
- INTC_IRQ(MTU2_TCI1V, 120), INTC_IRQ(MTU2_TCI1U, 121),
+ INTC_IRQ(MTU22_AB, 124), INTC_IRQ(MTU22_AB, 125),
+ INTC_IRQ(MTU22_VU, 128), INTC_IRQ(MTU22_VU, 129),
- INTC_IRQ(MTU2_TGI2A, 124), INTC_IRQ(MTU2_TGI2B, 125),
- INTC_IRQ(MTU2_TCI2V, 128), INTC_IRQ(MTU2_TCI2U, 129),
+ INTC_IRQ(MTU23_ABCD, 132), INTC_IRQ(MTU23_ABCD, 133),
+ INTC_IRQ(MTU23_ABCD, 134), INTC_IRQ(MTU23_ABCD, 135),
- INTC_IRQ(MTU2_TGI3A, 132), INTC_IRQ(MTU2_TGI3B, 133),
- INTC_IRQ(MTU2_TGI3C, 134), INTC_IRQ(MTU2_TGI3D, 135),
INTC_IRQ(MTU2_TCI3V, 136),
- INTC_IRQ(MTU2_TGI4A, 140), INTC_IRQ(MTU2_TGI4B, 141),
- INTC_IRQ(MTU2_TGI4C, 142), INTC_IRQ(MTU2_TGI4D, 143),
+ INTC_IRQ(MTU24_ABCD, 140), INTC_IRQ(MTU24_ABCD, 141),
+ INTC_IRQ(MTU24_ABCD, 142), INTC_IRQ(MTU24_ABCD, 143),
+
INTC_IRQ(MTU2_TCI4V, 144),
- INTC_IRQ(MTU2_TGI5U, 148), INTC_IRQ(MTU2_TGI5V, 149),
- INTC_IRQ(MTU2_TGI5W, 150),
+ INTC_IRQ(MTU25_UVW, 148), INTC_IRQ(MTU25_UVW, 149),
+ INTC_IRQ(MTU25_UVW, 150),
+
+ INTC_IRQ(RTC, 152), INTC_IRQ(RTC, 153),
+ INTC_IRQ(RTC, 154),
- INTC_IRQ(RTC_ARM, 152), INTC_IRQ(RTC_PRD, 153),
- INTC_IRQ(RTC_CUP, 154), INTC_IRQ(WDT, 156),
+ INTC_IRQ(WDT, 156),
- INTC_IRQ(IIC30_STPI, 157), INTC_IRQ(IIC30_NAKI, 158),
- INTC_IRQ(IIC30_RXI, 159), INTC_IRQ(IIC30_TXI, 160),
- INTC_IRQ(IIC30_TEI, 161),
+ INTC_IRQ(IIC30, 157), INTC_IRQ(IIC30, 158),
+ INTC_IRQ(IIC30, 159), INTC_IRQ(IIC30, 160),
+ INTC_IRQ(IIC30, 161),
- INTC_IRQ(IIC31_STPI, 164), INTC_IRQ(IIC31_NAKI, 165),
- INTC_IRQ(IIC31_RXI, 166), INTC_IRQ(IIC31_TXI, 167),
- INTC_IRQ(IIC31_TEI, 168),
+ INTC_IRQ(IIC31, 164), INTC_IRQ(IIC31, 165),
+ INTC_IRQ(IIC31, 166), INTC_IRQ(IIC31, 167),
+ INTC_IRQ(IIC31, 168),
- INTC_IRQ(IIC32_STPI, 170), INTC_IRQ(IIC32_NAKI, 171),
- INTC_IRQ(IIC32_RXI, 172), INTC_IRQ(IIC32_TXI, 173),
- INTC_IRQ(IIC32_TEI, 174),
+ INTC_IRQ(IIC32, 170), INTC_IRQ(IIC32, 171),
+ INTC_IRQ(IIC32, 172), INTC_IRQ(IIC32, 173),
+ INTC_IRQ(IIC32, 174),
INTC_IRQ(DMAC0_DMINT0, 176), INTC_IRQ(DMAC1_DMINT1, 177),
INTC_IRQ(DMAC2_DMINT2, 178), INTC_IRQ(DMAC3_DMINT3, 179),
- INTC_IRQ(SCIF0_BRI, 180), INTC_IRQ(SCIF0_ERI, 181),
- INTC_IRQ(SCIF0_RXI, 182), INTC_IRQ(SCIF0_TXI, 183),
- INTC_IRQ(SCIF1_BRI, 184), INTC_IRQ(SCIF1_ERI, 185),
- INTC_IRQ(SCIF1_RXI, 186), INTC_IRQ(SCIF1_TXI, 187),
- INTC_IRQ(SCIF2_BRI, 188), INTC_IRQ(SCIF2_ERI, 189),
- INTC_IRQ(SCIF2_RXI, 190), INTC_IRQ(SCIF2_TXI, 191),
- INTC_IRQ(SCIF3_BRI, 192), INTC_IRQ(SCIF3_ERI, 193),
- INTC_IRQ(SCIF3_RXI, 194), INTC_IRQ(SCIF3_TXI, 195),
- INTC_IRQ(SCIF4_BRI, 196), INTC_IRQ(SCIF4_ERI, 197),
- INTC_IRQ(SCIF4_RXI, 198), INTC_IRQ(SCIF4_TXI, 199),
- INTC_IRQ(SCIF5_BRI, 200), INTC_IRQ(SCIF5_ERI, 201),
- INTC_IRQ(SCIF5_RXI, 202), INTC_IRQ(SCIF5_TXI, 203),
- INTC_IRQ(SCIF6_BRI, 204), INTC_IRQ(SCIF6_ERI, 205),
- INTC_IRQ(SCIF6_RXI, 206), INTC_IRQ(SCIF6_TXI, 207),
- INTC_IRQ(SCIF7_BRI, 208), INTC_IRQ(SCIF7_ERI, 209),
- INTC_IRQ(SCIF7_RXI, 210), INTC_IRQ(SCIF7_TXI, 211),
+ INTC_IRQ(SCIF0, 180), INTC_IRQ(SCIF0, 181),
+ INTC_IRQ(SCIF0, 182), INTC_IRQ(SCIF0, 183),
+ INTC_IRQ(SCIF1, 184), INTC_IRQ(SCIF1, 185),
+ INTC_IRQ(SCIF1, 186), INTC_IRQ(SCIF1, 187),
+ INTC_IRQ(SCIF2, 188), INTC_IRQ(SCIF2, 189),
+ INTC_IRQ(SCIF2, 190), INTC_IRQ(SCIF2, 191),
+ INTC_IRQ(SCIF3, 192), INTC_IRQ(SCIF3, 193),
+ INTC_IRQ(SCIF3, 194), INTC_IRQ(SCIF3, 195),
+ INTC_IRQ(SCIF4, 196), INTC_IRQ(SCIF4, 197),
+ INTC_IRQ(SCIF4, 198), INTC_IRQ(SCIF4, 199),
+ INTC_IRQ(SCIF5, 200), INTC_IRQ(SCIF5, 201),
+ INTC_IRQ(SCIF5, 202), INTC_IRQ(SCIF5, 203),
+ INTC_IRQ(SCIF6, 204), INTC_IRQ(SCIF6, 205),
+ INTC_IRQ(SCIF6, 206), INTC_IRQ(SCIF6, 207),
+ INTC_IRQ(SCIF7, 208), INTC_IRQ(SCIF7, 209),
+ INTC_IRQ(SCIF7, 210), INTC_IRQ(SCIF7, 211),
INTC_IRQ(DMAC0_DMINTA, 212), INTC_IRQ(DMAC4_DMINT4, 216),
INTC_IRQ(DMAC5_DMINT5, 217), INTC_IRQ(DMAC6_DMINT6, 218),
INTC_IRQ(DMAC7_DMINT7, 219),
- INTC_IRQ(RCAN0_ERS, 228), INTC_IRQ(RCAN0_OVR, 229),
- INTC_IRQ(RCAN0_SLE, 230),
- INTC_IRQ(RCAN0_RM0, 231), INTC_IRQ(RCAN0_RM1, 232),
+ INTC_IRQ(RCAN0, 228), INTC_IRQ(RCAN0, 229),
+ INTC_IRQ(RCAN0, 230),
+ INTC_IRQ(RCAN0, 231), INTC_IRQ(RCAN0, 232),
- INTC_IRQ(RCAN1_ERS, 234), INTC_IRQ(RCAN1_OVR, 235),
- INTC_IRQ(RCAN1_SLE, 236),
- INTC_IRQ(RCAN1_RM0, 237), INTC_IRQ(RCAN1_RM1, 238),
+ INTC_IRQ(RCAN1, 234), INTC_IRQ(RCAN1, 235),
+ INTC_IRQ(RCAN1, 236),
+ INTC_IRQ(RCAN1, 237), INTC_IRQ(RCAN1, 238),
INTC_IRQ(SSI0_SSII, 244), INTC_IRQ(SSI1_SSII, 245),
- INTC_IRQ(TMR0_CMIA0, 246), INTC_IRQ(TMR0_CMIB0, 247),
- INTC_IRQ(TMR0_OVI0, 248),
-
- INTC_IRQ(TMR1_CMIA1, 252), INTC_IRQ(TMR1_CMIB1, 253),
- INTC_IRQ(TMR1_OVI1, 254),
+ INTC_IRQ(TMR0, 246), INTC_IRQ(TMR0, 247),
+ INTC_IRQ(TMR0, 248),
+ INTC_IRQ(TMR1, 252), INTC_IRQ(TMR1, 253),
+ INTC_IRQ(TMR1, 254),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(MTU20_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
- INTC_GROUP(MTU20_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
-
- INTC_GROUP(MTU21_AB, MTU2_TGI1A, MTU2_TGI1B),
- INTC_GROUP(MTU21_VU, MTU2_TCI1V, MTU2_TCI1U),
- INTC_GROUP(MTU22_AB, MTU2_TGI2A, MTU2_TGI2B),
- INTC_GROUP(MTU22_VU, MTU2_TCI2V, MTU2_TCI2U),
- INTC_GROUP(MTU23_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
- INTC_GROUP(MTU24_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
- INTC_GROUP(MTU25_UVW, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
- INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP ),
-
- INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
- IIC30_TEI),
- INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
- IIC31_TEI),
- INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
- IIC32_TEI),
-
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SCIF4, SCIF4_BRI, SCIF4_ERI, SCIF4_RXI, SCIF4_TXI),
- INTC_GROUP(SCIF5, SCIF5_BRI, SCIF5_ERI, SCIF5_RXI, SCIF5_TXI),
- INTC_GROUP(SCIF6, SCIF6_BRI, SCIF6_ERI, SCIF6_RXI, SCIF6_TXI),
- INTC_GROUP(SCIF7, SCIF7_BRI, SCIF7_ERI, SCIF7_RXI, SCIF7_TXI),
-
- INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
- RCAN0_SLE),
- INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
- RCAN1_SLE),
-
- INTC_GROUP(TMR0, TMR0_CMIA0, TMR0_CMIB0, TMR0_OVI0),
- INTC_GROUP(TMR1, TMR1_CMIA1, TMR1_CMIB1, TMR1_OVI1),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffe9806, 0, 16, 4, /* IPR09 */ { RTC, WDT, IIC30, 0 } },
{ 0xfffe9808, 0, 16, 4, /* IPR10 */ { IIC31, IIC32, DMAC0_DMINT0, DMAC1_DMINT1 } },
- { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0 , SCIF1 } },
+ { 0xfffe980a, 0, 16, 4, /* IPR11 */ { DMAC2_DMINT2, DMAC3_DMINT3, SCIF0, SCIF1 } },
{ 0xfffe980c, 0, 16, 4, /* IPR12 */ { SCIF2, SCIF3, SCIF4, SCIF5 } },
{ 0xfffe980e, 0, 16, 4, /* IPR13 */ { SCIF6, SCIF7, DMAC0_DMINTA, DMAC4_DMINT4 } },
{ 0xfffe9810, 0, 16, 4, /* IPR14 */ { DMAC5_DMINT5, DMAC6_DMINT6, DMAC7_DMINT7, 0 } },
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 181, 182, 183, 180}
+ .irqs = { 180, 180, 180, 180 }
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 185, 186, 187, 184}
+ .irqs = { 184, 184, 184, 184 }
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 189, 186, 187, 188}
+ .irqs = { 188, 188, 188, 188 }
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 193, 194, 195, 192}
+ .irqs = { 192, 192, 192, 192 }
}, {
.mapbase = 0xfffea000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 196, 198, 199, 196}
+ .irqs = { 196, 196, 196, 196 }
}, {
.mapbase = 0xfffea800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 201, 202, 203, 200}
+ .irqs = { 200, 200, 200, 200 }
}, {
.mapbase = 0xfffeb000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 205, 206, 207, 204}
+ .irqs = { 204, 204, 204, 204 }
}, {
.mapbase = 0xfffeb800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 209, 210, 211, 208}
+ .irqs = { 208, 208, 208, 208 }
}, {
.flags = 0,
}
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 153,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 154,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
+ /* Shared Period/Carry/Alarm IRQ */
.start = 152,
.flags = IORESOURCE_IRQ,
},
/*
* SH7203 and SH7263 Setup
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
- DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
- DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
- DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
- DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
+ DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
USB, LCDC, CMT0, CMT1, BSC, WDT,
- MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
- MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
- MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
- MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
- MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
- MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
- ADC_ADI,
- IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI,
- IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI,
- IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI,
- IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
- SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI,
- SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI,
- SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
- /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
- ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF,
- ROMDEC_IREADY,
+ MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+ MTU3_ABCD, MTU4_ABCD, MTU2_TCI3V, MTU2_TCI4V,
- FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+ ADC_ADI,
+
+ IIC30, IIC31, IIC32, IIC33,
+ SCIF0, SCIF1, SCIF2, SCIF3,
- SDHI3, SDHI0, SDHI1,
+ SSU0, SSU1,
- RTC_ARM, RTC_PRD, RTC_CUP,
- RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE,
- RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE,
+ SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII,
- SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI,
+ /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */
+ ROMDEC, FLCTL, SDHI, RTC, RCAN0, RCAN1,
+ SRC, IEBI,
/* interrupt groups */
- PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD,
- IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3,
- SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC
+ PINT,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
- INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
- INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
- INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
- INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
- INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
- INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
- INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
- INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
+ INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+ INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+ INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+ INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+ INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+ INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+ INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+ INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141),
INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143),
INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145),
- INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147),
- INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149),
- INTC_IRQ(MTU2_TCI0V, 150),
- INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152),
- INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154),
- INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156),
- INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158),
- INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160),
- INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162),
- INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164),
+ INTC_IRQ(MTU0_ABCD, 146), INTC_IRQ(MTU0_ABCD, 147),
+ INTC_IRQ(MTU0_ABCD, 148), INTC_IRQ(MTU0_ABCD, 149),
+ INTC_IRQ(MTU0_VEF, 150),
+ INTC_IRQ(MTU0_VEF, 151), INTC_IRQ(MTU0_VEF, 152),
+ INTC_IRQ(MTU1_AB, 153), INTC_IRQ(MTU1_AB, 154),
+ INTC_IRQ(MTU1_VU, 155), INTC_IRQ(MTU1_VU, 156),
+ INTC_IRQ(MTU2_AB, 157), INTC_IRQ(MTU2_AB, 158),
+ INTC_IRQ(MTU2_VU, 159), INTC_IRQ(MTU2_VU, 160),
+ INTC_IRQ(MTU3_ABCD, 161), INTC_IRQ(MTU3_ABCD, 162),
+ INTC_IRQ(MTU3_ABCD, 163), INTC_IRQ(MTU3_ABCD, 164),
INTC_IRQ(MTU2_TCI3V, 165),
- INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167),
- INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169),
+ INTC_IRQ(MTU4_ABCD, 166), INTC_IRQ(MTU4_ABCD, 167),
+ INTC_IRQ(MTU4_ABCD, 168), INTC_IRQ(MTU4_ABCD, 169),
INTC_IRQ(MTU2_TCI4V, 170),
INTC_IRQ(ADC_ADI, 171),
- INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173),
- INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175),
- INTC_IRQ(IIC30_TEI, 176),
- INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178),
- INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180),
- INTC_IRQ(IIC31_TEI, 181),
- INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183),
- INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185),
- INTC_IRQ(IIC32_TEI, 186),
- INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188),
- INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190),
- INTC_IRQ(IIC33_TEI, 191),
- INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193),
- INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195),
- INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197),
- INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199),
- INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201),
- INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203),
- INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205),
- INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207),
- INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209),
- INTC_IRQ(SSU0_SSTXI, 210),
- INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212),
- INTC_IRQ(SSU1_SSTXI, 213),
+ INTC_IRQ(IIC30, 172), INTC_IRQ(IIC30, 173),
+ INTC_IRQ(IIC30, 174), INTC_IRQ(IIC30, 175),
+ INTC_IRQ(IIC30, 176),
+ INTC_IRQ(IIC31, 177), INTC_IRQ(IIC31, 178),
+ INTC_IRQ(IIC31, 179), INTC_IRQ(IIC31, 180),
+ INTC_IRQ(IIC31, 181),
+ INTC_IRQ(IIC32, 182), INTC_IRQ(IIC32, 183),
+ INTC_IRQ(IIC32, 184), INTC_IRQ(IIC32, 185),
+ INTC_IRQ(IIC32, 186),
+ INTC_IRQ(IIC33, 187), INTC_IRQ(IIC33, 188),
+ INTC_IRQ(IIC33, 189), INTC_IRQ(IIC33, 190),
+ INTC_IRQ(IIC33, 191),
+ INTC_IRQ(SCIF0, 192), INTC_IRQ(SCIF0, 193),
+ INTC_IRQ(SCIF0, 194), INTC_IRQ(SCIF0, 195),
+ INTC_IRQ(SCIF1, 196), INTC_IRQ(SCIF1, 197),
+ INTC_IRQ(SCIF1, 198), INTC_IRQ(SCIF1, 199),
+ INTC_IRQ(SCIF2, 200), INTC_IRQ(SCIF2, 201),
+ INTC_IRQ(SCIF2, 202), INTC_IRQ(SCIF2, 203),
+ INTC_IRQ(SCIF3, 204), INTC_IRQ(SCIF3, 205),
+ INTC_IRQ(SCIF3, 206), INTC_IRQ(SCIF3, 207),
+ INTC_IRQ(SSU0, 208), INTC_IRQ(SSU0, 209),
+ INTC_IRQ(SSU0, 210),
+ INTC_IRQ(SSU1, 211), INTC_IRQ(SSU1, 212),
+ INTC_IRQ(SSU1, 213),
INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215),
INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217),
- INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225),
- INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227),
- INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232),
- INTC_IRQ(RTC_CUP, 233),
- INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235),
- INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237),
- INTC_IRQ(RCAN0_SLE, 238),
- INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240),
- INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242),
- INTC_IRQ(RCAN1_SLE, 243),
+ INTC_IRQ(FLCTL, 224), INTC_IRQ(FLCTL, 225),
+ INTC_IRQ(FLCTL, 226), INTC_IRQ(FLCTL, 227),
+ INTC_IRQ(RTC, 231), INTC_IRQ(RTC, 232),
+ INTC_IRQ(RTC, 233),
+ INTC_IRQ(RCAN0, 234), INTC_IRQ(RCAN0, 235),
+ INTC_IRQ(RCAN0, 236), INTC_IRQ(RCAN0, 237),
+ INTC_IRQ(RCAN0, 238),
+ INTC_IRQ(RCAN1, 239), INTC_IRQ(RCAN1, 240),
+ INTC_IRQ(RCAN1, 241), INTC_IRQ(RCAN1, 242),
+ INTC_IRQ(RCAN1, 243),
/* SH7263-specific trash */
#ifdef CONFIG_CPU_SUBTYPE_SH7263
- INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219),
- INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221),
- INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223),
+ INTC_IRQ(ROMDEC, 218), INTC_IRQ(ROMDEC, 219),
+ INTC_IRQ(ROMDEC, 220), INTC_IRQ(ROMDEC, 221),
+ INTC_IRQ(ROMDEC, 222), INTC_IRQ(ROMDEC, 223),
- INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230),
+ INTC_IRQ(SDHI, 228), INTC_IRQ(SDHI, 229),
+ INTC_IRQ(SDHI, 230),
- INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245),
- INTC_IRQ(SRC_IDEI, 246),
+ INTC_IRQ(SRC, 244), INTC_IRQ(SRC, 245),
+ INTC_IRQ(SRC, 246),
INTC_IRQ(IEBI, 247),
#endif
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
- INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
- INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
- INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
- INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
- INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
- INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
- INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
- INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
- INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
- INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
- INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
- INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
- INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
- INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
- INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
- INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI,
- IIC30_TEI),
- INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI,
- IIC31_TEI),
- INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI,
- IIC32_TEI),
- INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI,
- IIC33_TEI),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
- INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI),
- INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI),
- INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I,
- FLCTL_FLTREQ1I),
- INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP),
- INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1,
- RCAN0_SLE),
- INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1,
- RCAN1_SLE),
-
-#ifdef CONFIG_CPU_SUBTYPE_SH7263
- INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG,
- ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY),
- INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1),
- INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI),
-#endif
};
static struct intc_prio_reg prio_registers[] __initdata = {
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 193, 194, 195, 192 },
+ .irqs = { 192, 192, 192, 192 },
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 197, 198, 199, 196 },
+ .irqs = { 196, 196, 196, 196 },
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 201, 202, 203, 200 },
+ .irqs = { 200, 200, 200, 200 },
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 205, 206, 207, 204 },
+ .irqs = { 204, 204, 204, 204 },
}, {
.flags = 0,
}
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 232,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 233,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
+ /* Shared Period/Carry/Alarm IRQ */
.start = 231,
.flags = IORESOURCE_IRQ,
},
* SH7206 Setup
*
* Copyright (C) 2006 Yoshinori Sato
+ * Copyright (C) 2009 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
ADC_ADI0, ADC_ADI1,
- DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI,
- DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI,
- DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI,
- DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI,
+
+ DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
+
+ MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
+ MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
+ IIC3,
+
CMT0, CMT1, BSC, WDT,
- MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
- MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
- MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
- MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
- MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
- MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
- MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
- POE2_OEI1, POE2_OEI2,
- MTU2S_TGI3A, MTU2S_TGI3B, MTU2S_TGI3C, MTU2S_TGI3D, MTU2S_TCI3V,
- MTU2S_TGI4A, MTU2S_TGI4B, MTU2S_TGI4C, MTU2S_TGI4D, MTU2S_TCI4V,
- MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W,
+
+ MTU2_TCI3V, MTU2_TCI4V, MTU2S_TCI3V, MTU2S_TCI4V,
+
POE2_OEI3,
- IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI,
- SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
- SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI,
+
+ SCIF0, SCIF1, SCIF2, SCIF3,
/* interrupt groups */
- PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7,
- MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU,
- MTU3_ABCD, MTU4_ABCD, MTU5, POE2_12, MTU3S_ABCD, MTU4S_ABCD, MTU5S,
- IIC3, SCIF0, SCIF1, SCIF2, SCIF3,
+ PINT,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
INTC_IRQ(ADC_ADI0, 92), INTC_IRQ(ADC_ADI1, 96),
- INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109),
- INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113),
- INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117),
- INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121),
- INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125),
- INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129),
- INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133),
- INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137),
+ INTC_IRQ(DMAC0, 108), INTC_IRQ(DMAC0, 109),
+ INTC_IRQ(DMAC1, 112), INTC_IRQ(DMAC1, 113),
+ INTC_IRQ(DMAC2, 116), INTC_IRQ(DMAC2, 117),
+ INTC_IRQ(DMAC3, 120), INTC_IRQ(DMAC3, 121),
+ INTC_IRQ(DMAC4, 124), INTC_IRQ(DMAC4, 125),
+ INTC_IRQ(DMAC5, 128), INTC_IRQ(DMAC5, 129),
+ INTC_IRQ(DMAC6, 132), INTC_IRQ(DMAC6, 133),
+ INTC_IRQ(DMAC7, 136), INTC_IRQ(DMAC7, 137),
INTC_IRQ(CMT0, 140), INTC_IRQ(CMT1, 144),
INTC_IRQ(BSC, 148), INTC_IRQ(WDT, 152),
- INTC_IRQ(MTU2_TGI0A, 156), INTC_IRQ(MTU2_TGI0B, 157),
- INTC_IRQ(MTU2_TGI0C, 158), INTC_IRQ(MTU2_TGI0D, 159),
- INTC_IRQ(MTU2_TCI0V, 160),
- INTC_IRQ(MTU2_TGI0E, 161), INTC_IRQ(MTU2_TGI0F, 162),
- INTC_IRQ(MTU2_TGI1A, 164), INTC_IRQ(MTU2_TGI1B, 165),
- INTC_IRQ(MTU2_TCI1V, 168), INTC_IRQ(MTU2_TCI1U, 169),
- INTC_IRQ(MTU2_TGI2A, 172), INTC_IRQ(MTU2_TGI2B, 173),
- INTC_IRQ(MTU2_TCI2V, 176), INTC_IRQ(MTU2_TCI2U, 177),
- INTC_IRQ(MTU2_TGI3A, 180), INTC_IRQ(MTU2_TGI3B, 181),
- INTC_IRQ(MTU2_TGI3C, 182), INTC_IRQ(MTU2_TGI3D, 183),
+ INTC_IRQ(MTU0_ABCD, 156), INTC_IRQ(MTU0_ABCD, 157),
+ INTC_IRQ(MTU0_ABCD, 158), INTC_IRQ(MTU0_ABCD, 159),
+ INTC_IRQ(MTU0_VEF, 160), INTC_IRQ(MTU0_VEF, 161),
+ INTC_IRQ(MTU0_VEF, 162),
+ INTC_IRQ(MTU1_AB, 164), INTC_IRQ(MTU1_AB, 165),
+ INTC_IRQ(MTU1_VU, 168), INTC_IRQ(MTU1_VU, 169),
+ INTC_IRQ(MTU2_AB, 172), INTC_IRQ(MTU2_AB, 173),
+ INTC_IRQ(MTU2_VU, 176), INTC_IRQ(MTU2_VU, 177),
+ INTC_IRQ(MTU3_ABCD, 180), INTC_IRQ(MTU3_ABCD, 181),
+ INTC_IRQ(MTU3_ABCD, 182), INTC_IRQ(MTU3_ABCD, 183),
INTC_IRQ(MTU2_TCI3V, 184),
- INTC_IRQ(MTU2_TGI4A, 188), INTC_IRQ(MTU2_TGI4B, 189),
- INTC_IRQ(MTU2_TGI4C, 190), INTC_IRQ(MTU2_TGI4D, 191),
+ INTC_IRQ(MTU4_ABCD, 188), INTC_IRQ(MTU4_ABCD, 189),
+ INTC_IRQ(MTU4_ABCD, 190), INTC_IRQ(MTU4_ABCD, 191),
INTC_IRQ(MTU2_TCI4V, 192),
- INTC_IRQ(MTU2_TGI5U, 196), INTC_IRQ(MTU2_TGI5V, 197),
- INTC_IRQ(MTU2_TGI5W, 198),
- INTC_IRQ(POE2_OEI1, 200), INTC_IRQ(POE2_OEI2, 201),
- INTC_IRQ(MTU2S_TGI3A, 204), INTC_IRQ(MTU2S_TGI3B, 205),
- INTC_IRQ(MTU2S_TGI3C, 206), INTC_IRQ(MTU2S_TGI3D, 207),
+ INTC_IRQ(MTU5, 196), INTC_IRQ(MTU5, 197),
+ INTC_IRQ(MTU5, 198),
+ INTC_IRQ(POE2_12, 200), INTC_IRQ(POE2_12, 201),
+ INTC_IRQ(MTU3S_ABCD, 204), INTC_IRQ(MTU3S_ABCD, 205),
+ INTC_IRQ(MTU3S_ABCD, 206), INTC_IRQ(MTU3S_ABCD, 207),
INTC_IRQ(MTU2S_TCI3V, 208),
- INTC_IRQ(MTU2S_TGI4A, 212), INTC_IRQ(MTU2S_TGI4B, 213),
- INTC_IRQ(MTU2S_TGI4C, 214), INTC_IRQ(MTU2S_TGI4D, 215),
+ INTC_IRQ(MTU4S_ABCD, 212), INTC_IRQ(MTU4S_ABCD, 213),
+ INTC_IRQ(MTU4S_ABCD, 214), INTC_IRQ(MTU4S_ABCD, 215),
INTC_IRQ(MTU2S_TCI4V, 216),
- INTC_IRQ(MTU2S_TGI5U, 220), INTC_IRQ(MTU2S_TGI5V, 221),
- INTC_IRQ(MTU2S_TGI5W, 222),
+ INTC_IRQ(MTU5S, 220), INTC_IRQ(MTU5S, 221),
+ INTC_IRQ(MTU5S, 222),
INTC_IRQ(POE2_OEI3, 224),
- INTC_IRQ(IIC3_STPI, 228), INTC_IRQ(IIC3_NAKI, 229),
- INTC_IRQ(IIC3_RXI, 230), INTC_IRQ(IIC3_TXI, 231),
- INTC_IRQ(IIC3_TEI, 232),
- INTC_IRQ(SCIF0_BRI, 240), INTC_IRQ(SCIF0_ERI, 241),
- INTC_IRQ(SCIF0_RXI, 242), INTC_IRQ(SCIF0_TXI, 243),
- INTC_IRQ(SCIF1_BRI, 244), INTC_IRQ(SCIF1_ERI, 245),
- INTC_IRQ(SCIF1_RXI, 246), INTC_IRQ(SCIF1_TXI, 247),
- INTC_IRQ(SCIF2_BRI, 248), INTC_IRQ(SCIF2_ERI, 249),
- INTC_IRQ(SCIF2_RXI, 250), INTC_IRQ(SCIF2_TXI, 251),
- INTC_IRQ(SCIF3_BRI, 252), INTC_IRQ(SCIF3_ERI, 253),
- INTC_IRQ(SCIF3_RXI, 254), INTC_IRQ(SCIF3_TXI, 255),
+ INTC_IRQ(IIC3, 228), INTC_IRQ(IIC3, 229),
+ INTC_IRQ(IIC3, 230), INTC_IRQ(IIC3, 231),
+ INTC_IRQ(IIC3, 232),
+ INTC_IRQ(SCIF0, 240), INTC_IRQ(SCIF0, 241),
+ INTC_IRQ(SCIF0, 242), INTC_IRQ(SCIF0, 243),
+ INTC_IRQ(SCIF1, 244), INTC_IRQ(SCIF1, 245),
+ INTC_IRQ(SCIF1, 246), INTC_IRQ(SCIF1, 247),
+ INTC_IRQ(SCIF2, 248), INTC_IRQ(SCIF2, 249),
+ INTC_IRQ(SCIF2, 250), INTC_IRQ(SCIF2, 251),
+ INTC_IRQ(SCIF3, 252), INTC_IRQ(SCIF3, 253),
+ INTC_IRQ(SCIF3, 254), INTC_IRQ(SCIF3, 255),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
- INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI),
- INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI),
- INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI),
- INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI),
- INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI),
- INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI),
- INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI),
- INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI),
- INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D),
- INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F),
- INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B),
- INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U),
- INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B),
- INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U),
- INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D),
- INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
- INTC_GROUP(MTU5, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
- INTC_GROUP(POE2_12, POE2_OEI1, POE2_OEI2),
- INTC_GROUP(MTU3S_ABCD, MTU2S_TGI3A, MTU2S_TGI3B,
- MTU2S_TGI3C, MTU2S_TGI3D),
- INTC_GROUP(MTU4S_ABCD, MTU2S_TGI4A, MTU2S_TGI4B,
- MTU2S_TGI4C, MTU2S_TGI4D),
- INTC_GROUP(MTU5S, MTU2S_TGI5U, MTU2S_TGI5V, MTU2S_TGI5W),
- INTC_GROUP(IIC3, IIC3_STPI, IIC3_NAKI, IIC3_RXI, IIC3_TXI, IIC3_TEI),
- INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
- INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
- INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI),
};
static struct intc_prio_reg prio_registers[] __initdata = {
.mapbase = 0xfffe8000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 241, 242, 243, 240 },
+ .irqs = { 240, 240, 240, 240 },
}, {
.mapbase = 0xfffe8800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 245, 246, 247, 244 },
+ .irqs = { 244, 244, 244, 244 },
}, {
.mapbase = 0xfffe9000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 249, 250, 251, 248 },
+ .irqs = { 248, 248, 248, 248 },
}, {
.mapbase = 0xfffe9800,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 253, 254, 255, 252 },
+ .irqs = { 252, 252, 252, 252 },
}, {
.flags = 0,
}
obj-y := ex.o probe.o entry.o setup-sh3.o
+obj-$(CONFIG_HIBERNATION) += swsusp.o
+
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o
#include <asm/unistd.h>
#include <cpu/mmu_context.h>
#include <asm/page.h>
+#include <asm/cache.h>
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
#if defined(CONFIG_SH_STANDARD_BIOS)
/* Unwind the stack and jmp to the debug entry */
ENTRY(sh_bios_handler)
- mov.l @r15+, r0
- mov.l @r15+, r1
- mov.l @r15+, r2
- mov.l @r15+, r3
- mov.l @r15+, r4
- mov.l @r15+, r5
- mov.l @r15+, r6
- mov.l @r15+, r7
- stc sr, r8
- mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F
- or r9, r8
- ldc r8, sr ! here, change the register bank
- mov.l @r15+, r8
- mov.l @r15+, r9
- mov.l @r15+, r10
- mov.l @r15+, r11
- mov.l @r15+, r12
- mov.l @r15+, r13
- mov.l @r15+, r14
- mov.l @r15+, k0
- ldc.l @r15+, spc
- lds.l @r15+, pr
- mov.l @r15+, k1
- ldc.l @r15+, gbr
- lds.l @r15+, mach
- lds.l @r15+, macl
- mov k0, r15
+ mov.l 1f, r8
+ bsr restore_regs
+ nop
+
+ lds k2, pr ! restore pr
+ mov k4, r15
!
mov.l 2f, k0
mov.l @k0, k0
jmp @k0
- ldc k1, ssr
+ ldc k3, ssr
.align 2
1: .long 0x300000f0
2: .long gdb_vbr_vector
#endif /* CONFIG_SH_STANDARD_BIOS */
-restore_all:
+! restore_regs()
+! - restore r0, r1, r2, r3, r4, r5, r6, r7 from the stack
+! - switch bank
+! - restore r8, r9, r10, r11, r12, r13, r14, r15 from the stack
+! - restore spc, pr*, ssr, gbr, mach, macl, skip default tra
+! k2 returns original pr
+! k3 returns original sr
+! k4 returns original stack pointer
+! r8 passes SR bitmask, overwritten with restored data on return
+! r9 trashed
+! BL=0 on entry, on exit BL=1 (depending on r8).
+
+ENTRY(restore_regs)
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
mov.l @r15+, r6
mov.l @r15+, r7
!
- stc sr, r8
- mov.l 7f, r9
- or r9, r8 ! BL =1, RB=1
- ldc r8, sr ! here, change the register bank
+ stc sr, r9
+ or r8, r9
+ ldc r9, sr
!
mov.l @r15+, r8
mov.l @r15+, r9
mov.l @r15+, r14
mov.l @r15+, k4 ! original stack pointer
ldc.l @r15+, spc
- lds.l @r15+, pr
+ mov.l @r15+, k2 ! original PR
mov.l @r15+, k3 ! original SR
ldc.l @r15+, gbr
lds.l @r15+, mach
lds.l @r15+, macl
- add #4, r15 ! Skip syscall number
+ rts
+ add #4, r15 ! Skip syscall number
+
+restore_all:
+ mov.l 7f, r8
+ bsr restore_regs
+ nop
+
+ lds k2, pr ! restore pr
!
#ifdef CONFIG_SH_DSP
mov.l @r15+, k0 ! DSP mode marker
mov #0xf0, k1
extu.b k1, k1
not k1, k1
- and k1, k2 ! Mask orignal SR value
+ and k1, k2 ! Mask original SR value
!
mov k3, k0 ! Calculate IMASK-bits
shlr2 k0
mov #0, k1
mov.b k1, @k0
#endif
- mov.l @r15+, k2 ! restore EXPEVT
mov k4, r15
rte
nop
.balign 4096,0,4096
ENTRY(vbr_base)
.long 0
+!
+! 0x100: General exception vector
!
.balign 256,0,256
general_exception:
- mov.l 1f, k2
- mov.l 2f, k3
-#ifdef CONFIG_CPU_SUBTYPE_SHX3
- mov.l @k2, k2
+#ifndef CONFIG_CPU_SUBTYPE_SHX3
+ bra handle_exception
+ sts pr, k3 ! save original pr value in k3
+#else
+ mov.l 1f, k4
+ mov.l @k4, k4
! Is EXPEVT larger than 0x800?
mov #0x8, k0
shll8 k0
- cmp/hs k0, k2
+ cmp/hs k0, k4
bf 0f
! then add 0x580 (k2 is 0xd80 or 0xda0)
mov #0x58, k0
shll2 k0
shll2 k0
- add k0, k2
+ add k0, k4
0:
- bra handle_exception
+ ! Setup stack and save DSP context (k0 contains original r15 on return)
+ bsr prepare_stack_save_dsp
nop
-#else
- bra handle_exception
- mov.l @k2, k2
-#endif
- .align 2
-1: .long EXPEVT
-2: .long ret_from_exception
-!
-!
- .balign 1024,0,1024
-tlb_miss:
- mov.l 1f, k2
- mov.l 4f, k3
- bra handle_exception
- mov.l @k2, k2
-!
- .balign 512,0,512
-interrupt:
- mov.l 3f, k3
-#if defined(CONFIG_KGDB)
- mov.l 2f, k2
- ! Debounce (filter nested NMI)
- mov.l @k2, k0
- mov.l 5f, k1
- cmp/eq k1, k0
- bf 0f
- mov.l 6f, k1
- tas.b @k1
- bt 0f
- rte
+ ! Save registers / Switch to bank 0
+ mov k4, k2 ! keep vector in k2
+ mov.l 1f, k4 ! SR bits to clear in k4
+ bsr save_regs ! needs original pr value in k3
+ nop
+
+ bra handle_exception_special
nop
- .align 2
-2: .long INTEVT
-5: .long NMI_VEC
-6: .long in_nmi
-0:
-#endif /* defined(CONFIG_KGDB) */
- bra handle_exception
- mov #-1, k2 ! interrupt exception marker
.align 2
1: .long EXPEVT
-3: .long ret_from_irq
-4: .long ret_from_exception
+#endif
-!
-!
- .align 2
-ENTRY(handle_exception)
- ! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
- ! save all registers onto stack.
- !
+! prepare_stack_save_dsp()
+! - roll back gRB
+! - switch to kernel stack
+! - save DSP
+! k0 returns original sp (after roll back)
+! k1 trashed
+! k2 trashed
+prepare_stack_save_dsp:
#ifdef CONFIG_GUSA
! Check for roll back gRB (User and Kernel)
mov r15, k0
2: mov k1, r15 ! SP = r1
1:
#endif
-
+ ! Switch to kernel stack if needed
stc ssr, k0 ! Is it from kernel space?
shll k0 ! Check MD bit (bit30) by shifting it into...
shll k0 ! ...the T bit
add current, k1
mov k1, r15 ! change to kernel stack
!
-1: mov.l 2f, k1
- !
+1:
#ifdef CONFIG_SH_DSP
- mov.l r2, @-r15 ! Save r2, we need another reg
- stc sr, k4
- mov.l 1f, r2
- tst r2, k4 ! Check if in DSP mode
- mov.l @r15+, r2 ! Restore r2 now
+ ! Save DSP context if needed
+ stc sr, k1
+ mov #0x10, k2
+ shll8 k2 ! DSP=1 (0x00001000)
+ tst k2, k1 ! Check if in DSP mode (passed in k2)
bt/s skip_save
- mov #0, k4 ! Set marker for no stack frame
+ mov #0, k1 ! Set marker for no stack frame
- mov r2, k4 ! Backup r2 (in k4) for later
+ mov k2, k1 ! Save has-frame marker
! Save DSP registers on stack
stc.l mod, @-r15
! as we're not at all interested in supporting ancient toolchains at
! this point. -- PFM.
- mov r15, r2
+ mov r15, k2
.word 0xf653 ! movs.l a1, @-r2
.word 0xf6f3 ! movs.l a0g, @-r2
.word 0xf6d3 ! movs.l a1g, @-r2
.word 0xf6c3 ! movs.l m0, @-r2
.word 0xf6e3 ! movs.l m1, @-r2
- mov r2, r15
+ mov k2, r15
- mov k4, r2 ! Restore r2
- mov.l 1f, k4 ! Force DSP stack frame
skip_save:
- mov.l k4, @-r15 ! Push DSP mode marker onto stack
+ mov.l k1, @-r15 ! Push DSP mode marker onto stack
#endif
- ! Save the user registers on the stack.
- mov.l k2, @-r15 ! EXPEVT
-
- mov #-1, k4
- mov.l k4, @-r15 ! set TRA (default: -1)
- !
+ rts
+ nop
+!
+! 0x400: Instruction and Data TLB miss exception vector
+!
+ .balign 1024,0,1024
+tlb_miss:
+ sts pr, k3 ! save original pr value in k3
+
+handle_exception:
+ mova exception_data, k0
+
+ ! Setup stack and save DSP context (k0 contains original r15 on return)
+ bsr prepare_stack_save_dsp
+ PREF(k0)
+
+ ! Save registers / Switch to bank 0
+ mov.l 5f, k2 ! vector register address
+ mov.l 1f, k4 ! SR bits to clear in k4
+ bsr save_regs ! needs original pr value in k3
+ mov.l @k2, k2 ! read out vector and keep in k2
+
+handle_exception_special:
+ ! Setup return address and jump to exception handler
+ mov.l 7f, r9 ! fetch return address
+ stc r2_bank, r0 ! k2 (vector)
+ mov.l 6f, r10
+ shlr2 r0
+ shlr r0
+ mov.l @(r0, r10), r10
+ jmp @r10
+ lds r9, pr ! put return address in pr
+
+ .align L1_CACHE_SHIFT
+
+! save_regs()
+! - save default tra, macl, mach, gbr, ssr, pr* and spc on the stack
+! - save r15*, r14, r13, r12, r11, r10, r9, r8 on the stack
+! - switch bank
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k0 contains original stack pointer*
+! k1 trashed
+! k3 passes original pr*
+! k4 passes SR bitmask
+! BL=1 on entry, on exit BL=0.
+
+ENTRY(save_regs)
+ mov #-1, r1
+ mov.l k1, @-r15 ! set TRA (default: -1)
sts.l macl, @-r15
sts.l mach, @-r15
stc.l gbr, @-r15
stc.l ssr, @-r15
- sts.l pr, @-r15
+ mov.l k3, @-r15 ! original pr in k3
stc.l spc, @-r15
- !
- lds k3, pr ! Set the return address to pr
- !
- mov.l k0, @-r15 ! save orignal stack
+
+ mov.l k0, @-r15 ! original stack pointer in k0
mov.l r14, @-r15
mov.l r13, @-r15
mov.l r12, @-r15
mov.l r10, @-r15
mov.l r9, @-r15
mov.l r8, @-r15
- !
- stc sr, r8 ! Back to normal register bank, and
- or k1, r8 ! Block all interrupts
- mov.l 3f, k1
- and k1, r8 ! ...
- ldc r8, sr ! ...changed here.
- !
+
+ mov.l 0f, k3 ! SR bits to set in k3
+
+ ! fall-through
+
+! save_low_regs()
+! - modify SR for bank switch
+! - save r7, r6, r5, r4, r3, r2, r1, r0 on the stack
+! k3 passes bits to set in SR
+! k4 passes bits to clear in SR
+
+ENTRY(save_low_regs)
+ stc sr, r8
+ or k3, r8
+ and k4, r8
+ ldc r8, sr
+
mov.l r7, @-r15
mov.l r6, @-r15
mov.l r5, @-r15
mov.l r3, @-r15
mov.l r2, @-r15
mov.l r1, @-r15
- mov.l r0, @-r15
-
- /*
- * This gets a bit tricky.. in the INTEVT case we don't want to use
- * the VBR offset as a destination in the jump call table, since all
- * of the destinations are the same. In this case, (interrupt) sets
- * a marker in r2 (now r2_bank since SR.RB changed), which we check
- * to determine the exception type. For all other exceptions, we
- * forcibly read EXPEVT from memory and fix up the jump address, in
- * the interrupt exception case we jump to do_IRQ() and defer the
- * INTEVT read until there. As a bonus, we can also clean up the SR.RB
- * checks that do_IRQ() was doing..
- */
- stc r2_bank, r8
- cmp/pz r8
- bf interrupt_exception
- shlr2 r8
- shlr r8
- mov.l 4f, r9
- add r8, r9
- mov.l @r9, r9
- jmp @r9
- nop
rts
- nop
+ mov.l r0, @-r15
+!
+! 0x600: Interrupt / NMI vector
+!
+ .balign 512,0,512
+ENTRY(handle_interrupt)
+#if defined(CONFIG_KGDB)
+ mov.l 2f, k2
+ ! Debounce (filter nested NMI)
+ mov.l @k2, k0
+ mov.l 9f, k1
+ cmp/eq k1, k0
+ bf 11f
+ mov.l 10f, k1
+ tas.b @k1
+ bt 11f
+ rte
+ nop
.align 2
-1: .long 0x00001000 ! DSP=1
-2: .long 0x000080f0 ! FD=1, IMASK=15
-3: .long 0xcfffffff ! RB=0, BL=0
-4: .long exception_handling_table
+9: .long NMI_VEC
+10: .long in_nmi
+11:
+#endif /* defined(CONFIG_KGDB) */
+ sts pr, k3 ! save original pr value in k3
+ mova exception_data, k0
-interrupt_exception:
- mov.l 1f, r9
+ ! Setup stack and save DSP context (k0 contains original r15 on return)
+ bsr prepare_stack_save_dsp
+ PREF(k0)
+
+ ! Save registers / Switch to bank 0
+ mov.l 1f, k4 ! SR bits to clear in k4
+ bsr save_regs ! needs original pr value in k3
+ mov #-1, k2 ! default vector kept in k2
+
+ ! Setup return address and jump to do_IRQ
+ mov.l 4f, r9 ! fetch return address
+ lds r9, pr ! put return address in pr
mov.l 2f, r4
- mov.l @r4, r4
+ mov.l 3f, r9
+ mov.l @r4, r4 ! pass INTEVT vector as arg0
jmp @r9
- mov r15, r5
- rts
- nop
-
- .align 2
-1: .long do_IRQ
-2: .long INTEVT
+ mov r15, r5 ! pass saved registers as arg1
- .align 2
ENTRY(exception_none)
rts
nop
+
+ .align L1_CACHE_SHIFT
+exception_data:
+0: .long 0x000080f0 ! FD=1, IMASK=15
+1: .long 0xcfffffff ! RB=0, BL=0
+2: .long INTEVT
+3: .long do_IRQ
+4: .long ret_from_irq
+5: .long EXPEVT
+6: .long exception_handling_table
+7: .long ret_from_exception
/*
* SH7705 Setup
*
- * Copyright (C) 2006, 2007 Paul Mundt
+ * Copyright (C) 2006 - 2009 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
PINT07, PINT815,
- DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
- SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_TXI,
- ADC_ADI,
- USB_USI0, USB_USI1,
+
+ DMAC, SCIF0, SCIF2, ADC_ADI, USB,
+
TPU0, TPU1, TPU2, TPU3,
- TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- WDT,
- REF_RCMI,
+ TMU0, TMU1, TMU2,
- /* interrupt groups */
- RTC, TMU2, DMAC, USB, SCIF2, SCIF0,
+ RTC, WDT, REF_RCMI,
};
static struct intc_vect vectors[] __initdata = {
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
- INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_TXI, 0x8e0),
- INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
- INTC_VECT(SCIF2_TXI, 0x960),
+ INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+ INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
+ INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+ INTC_VECT(SCIF0, 0x8e0),
+ INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+ INTC_VECT(SCIF2, 0x960),
INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
+ INTC_VECT(USB, 0xa20), INTC_VECT(USB, 0xa40),
INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
INTC_VECT(WDT, 0x560),
INTC_VECT(REF_RCMI, 0x580),
};
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
- INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
- INTC_GROUP(USB, USB_USI0, USB_USI1),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI),
-};
-
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } },
};
-static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
NULL, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
.mapbase = 0xa4410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 56, 57, 59 },
+ .irqs = { 56, 56, 56 },
}, {
.mapbase = 0xa4400000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 52, 53, 55 },
+ .irqs = { 52, 52, 52 },
}, {
.flags = 0,
}
.start = 20,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
};
static struct sh_rtc_platform_info rtc_info = {
* SH3 Setup code for SH7706, SH7707, SH7708, SH7709
*
* Copyright (C) 2007 Magnus Damm
+ * Copyright (C) 2009 Paul Mundt
*
* Based on setup-sh7709.c
*
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
PINT07, PINT815,
- DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI,
- ADC_ADI,
+ DMAC, SCIF0, SCIF2, SCI, ADC_ADI,
LCDC, PCC0, PCC1,
- TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- WDT,
- REF_RCMI, REF_ROVI,
-
- /* interrupt groups */
- RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0,
+ TMU0, TMU1, TMU2,
+ RTC, WDT, REF,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
- INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500),
- INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
+ INTC_VECT(SCI, 0x4e0), INTC_VECT(SCI, 0x500),
+ INTC_VECT(SCI, 0x520), INTC_VECT(SCI, 0x540),
INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580),
- INTC_VECT(REF_ROVI, 0x5a0),
+ INTC_VECT(REF, 0x580),
+ INTC_VECT(REF, 0x5a0),
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
/* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
- INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+ INTC_VECT(DMAC, 0x800), INTC_VECT(DMAC, 0x820),
+ INTC_VECT(DMAC, 0x840), INTC_VECT(DMAC, 0x860),
INTC_VECT(ADC_ADI, 0x980),
- INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
- INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960),
+ INTC_VECT(SCIF2, 0x900), INTC_VECT(SCIF2, 0x920),
+ INTC_VECT(SCIF2, 0x940), INTC_VECT(SCIF2, 0x960),
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709)
INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+ INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+ INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707)
INTC_VECT(LCDC, 0x9a0),
#endif
};
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
- INTC_GROUP(REF, REF_RCMI, REF_ROVI),
- INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
- INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
-};
-
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
#endif
};
-static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, NULL,
NULL, prio_registers, NULL);
static struct resource rtc_resources[] = {
.flags = IORESOURCE_IO,
},
[1] = {
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
.start = 20,
.flags = IORESOURCE_IRQ,
},
.mapbase = 0xfffffe80,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
+ .irqs = { 23, 23, 23, 0 },
},
#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7707) || \
.mapbase = 0xa4000150,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 56, 57, 59, 58 },
+ .irqs = { 56, 56, 56, 56 },
},
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
.mapbase = 0xa4000140,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_IRDA,
- .irqs = { 52, 53, 55, 54 },
+ .irqs = { 52, 52, 52, 52 },
},
#endif
{
/*
* SH3 Setup code for SH7710, SH7712
*
- * Copyright (C) 2006, 2007 Paul Mundt
+ * Copyright (C) 2006 - 2009 Paul Mundt
* Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
- DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- DMAC_DEI4, DMAC_DEI5,
- IPSEC,
+ DMAC1, SCIF0, SCIF1, DMAC2, IPSEC,
EDMAC0, EDMAC1, EDMAC2,
- SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI,
- SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI,
- TMU0, TMU1, TMU2,
- RTC_ATI, RTC_PRI, RTC_CUI,
- WDT,
- REF,
+ SIOF0, SIOF1,
- /* interrupt groups */
- RTC, DMAC1, SCIF0, SCIF1, DMAC2, SIOF0, SIOF1,
+ TMU0, TMU1, TMU2,
+ RTC, WDT, REF,
};
static struct intc_vect vectors[] __initdata = {
/* IRQ0->5 are handled in setup-sh3.c */
- INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
- INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
- INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
- INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
- INTC_VECT(SCIF1_ERI, 0x900), INTC_VECT(SCIF1_RXI, 0x920),
- INTC_VECT(SCIF1_BRI, 0x940), INTC_VECT(SCIF1_TXI, 0x960),
- INTC_VECT(DMAC_DEI4, 0xb80), INTC_VECT(DMAC_DEI5, 0xba0),
+ INTC_VECT(DMAC1, 0x800), INTC_VECT(DMAC1, 0x820),
+ INTC_VECT(DMAC1, 0x840), INTC_VECT(DMAC1, 0x860),
+ INTC_VECT(SCIF0, 0x880), INTC_VECT(SCIF0, 0x8a0),
+ INTC_VECT(SCIF0, 0x8c0), INTC_VECT(SCIF0, 0x8e0),
+ INTC_VECT(SCIF1, 0x900), INTC_VECT(SCIF1, 0x920),
+ INTC_VECT(SCIF1, 0x940), INTC_VECT(SCIF1, 0x960),
+ INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
#ifdef CONFIG_CPU_SUBTYPE_SH7710
INTC_VECT(IPSEC, 0xbe0),
#endif
INTC_VECT(EDMAC0, 0xc00), INTC_VECT(EDMAC1, 0xc20),
INTC_VECT(EDMAC2, 0xc40),
- INTC_VECT(SIOF0_ERI, 0xe00), INTC_VECT(SIOF0_TXI, 0xe20),
- INTC_VECT(SIOF0_RXI, 0xe40), INTC_VECT(SIOF0_CCI, 0xe60),
- INTC_VECT(SIOF1_ERI, 0xe80), INTC_VECT(SIOF1_TXI, 0xea0),
- INTC_VECT(SIOF1_RXI, 0xec0), INTC_VECT(SIOF1_CCI, 0xee0),
+ INTC_VECT(SIOF0, 0xe00), INTC_VECT(SIOF0, 0xe20),
+ INTC_VECT(SIOF0, 0xe40), INTC_VECT(SIOF0, 0xe60),
+ INTC_VECT(SIOF1, 0xe80), INTC_VECT(SIOF1, 0xea0),
+ INTC_VECT(SIOF1, 0xec0), INTC_VECT(SIOF1, 0xee0),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
INTC_VECT(TMU2, 0x440),
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
INTC_VECT(WDT, 0x560),
INTC_VECT(REF, 0x580),
};
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC1, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(DMAC2, DMAC_DEI4, DMAC_DEI5),
- INTC_GROUP(SIOF0, SIOF0_ERI, SIOF0_TXI, SIOF0_RXI, SIOF0_CCI),
- INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI),
-};
-
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
{ 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } },
{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
};
-static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, NULL,
NULL, prio_registers, NULL);
static struct resource rtc_resources[] = {
.start = 20,
.flags = IORESOURCE_IRQ,
},
- [2] = {
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
};
static struct sh_rtc_platform_info rtc_info = {
.mapbase = 0xa4400000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 52, 53, 55, 54 },
+ .irqs = { 52, 52, 52, 52 },
}, {
.mapbase = 0xa4410000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 56, 57, 59, 58 },
+ .irqs = { 56, 56, 56, 56 },
}, {
.flags = 0,
* SH7720 Setup
*
* Copyright (C) 2007 Markus Brunner, Mark Jonas
+ * Copyright (C) 2009 Paul Mundt
*
* Based on arch/sh/kernel/cpu/sh4/setup-sh7750.c:
*
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
+ /* Shared Period/Carry/Alarm IRQ */
.start = 20,
.flags = IORESOURCE_IRQ,
},
UNUSED = 0,
/* interrupt sources */
- TMU0, TMU1, TMU2, RTC_ATI, RTC_PRI, RTC_CUI,
- WDT, REF_RCMI, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+ TMU0, TMU1, TMU2, RTC,
+ WDT, REF_RCMI, SIM,
IRQ0, IRQ1, IRQ2, IRQ3,
USBF_SPD, TMU_SUNI, IRQ5, IRQ4,
- DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3, LCDC, SSL,
- ADC, DMAC2_DEI4, DMAC2_DEI5, USBFI0, USBFI1, CMT,
+ DMAC1, LCDC, SSL,
+ ADC, DMAC2, USBFI, CMT,
SCIF0, SCIF1,
- PINT07, PINT815, TPU0, TPU1, TPU2, TPU3, IIC,
- SIOF0, SIOF1, MMCI0, MMCI1, MMCI2, MMCI3, PCC,
+ PINT07, PINT815, TPU, IIC,
+ SIOF0, SIOF1, MMC, PCC,
USBHI, AFEIF,
H_UDI,
- /* interrupt groups */
- TMU, RTC, SIM, DMAC1, USBFI, DMAC2, USB, TPU, MMC,
};
static struct intc_vect vectors[] __initdata = {
/* IRQ0->5 are handled in setup-sh3.c */
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2, 0x440), INTC_VECT(RTC_ATI, 0x480),
- INTC_VECT(RTC_PRI, 0x4a0), INTC_VECT(RTC_CUI, 0x4c0),
- INTC_VECT(SIM_ERI, 0x4e0), INTC_VECT(SIM_RXI, 0x500),
- INTC_VECT(SIM_TXI, 0x520), INTC_VECT(SIM_TEND, 0x540),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(RTC, 0x480),
+ INTC_VECT(RTC, 0x4a0), INTC_VECT(RTC, 0x4c0),
+ INTC_VECT(SIM, 0x4e0), INTC_VECT(SIM, 0x500),
+ INTC_VECT(SIM, 0x520), INTC_VECT(SIM, 0x540),
INTC_VECT(WDT, 0x560), INTC_VECT(REF_RCMI, 0x580),
/* H_UDI cannot be masked */ INTC_VECT(TMU_SUNI, 0x6c0),
- INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800),
- INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840),
- INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900),
+ INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1, 0x800),
+ INTC_VECT(DMAC1, 0x820), INTC_VECT(DMAC1, 0x840),
+ INTC_VECT(DMAC1, 0x860), INTC_VECT(LCDC, 0x900),
#if defined(CONFIG_CPU_SUBTYPE_SH7720)
INTC_VECT(SSL, 0x980),
#endif
- INTC_VECT(USBFI0, 0xa20), INTC_VECT(USBFI1, 0xa40),
+ INTC_VECT(USBFI, 0xa20), INTC_VECT(USBFI, 0xa40),
INTC_VECT(USBHI, 0xa60),
- INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0),
+ INTC_VECT(DMAC2, 0xb80), INTC_VECT(DMAC2, 0xba0),
INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00),
INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80),
INTC_VECT(PINT815, 0xca0), INTC_VECT(SIOF0, 0xd00),
- INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU0, 0xd80),
- INTC_VECT(TPU1, 0xda0), INTC_VECT(TPU2, 0xdc0),
- INTC_VECT(TPU3, 0xde0), INTC_VECT(IIC, 0xe00),
- INTC_VECT(MMCI0, 0xe80), INTC_VECT(MMCI1, 0xea0),
- INTC_VECT(MMCI2, 0xec0), INTC_VECT(MMCI3, 0xee0),
+ INTC_VECT(SIOF1, 0xd20), INTC_VECT(TPU, 0xd80),
+ INTC_VECT(TPU, 0xda0), INTC_VECT(TPU, 0xdc0),
+ INTC_VECT(TPU, 0xde0), INTC_VECT(IIC, 0xe00),
+ INTC_VECT(MMC, 0xe80), INTC_VECT(MMC, 0xea0),
+ INTC_VECT(MMC, 0xec0), INTC_VECT(MMC, 0xee0),
INTC_VECT(CMT, 0xf00), INTC_VECT(PCC, 0xf60),
INTC_VECT(AFEIF, 0xfe0),
};
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU, TMU0, TMU1, TMU2),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
- INTC_GROUP(DMAC1, DMAC1_DEI0, DMAC1_DEI1, DMAC1_DEI2, DMAC1_DEI3),
- INTC_GROUP(USBFI, USBFI0, USBFI1),
- INTC_GROUP(DMAC2, DMAC2_DEI4, DMAC2_DEI5),
- INTC_GROUP(TPU, TPU0, TPU1, TPU2, TPU3),
- INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3),
-};
-
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
{ 0xA4080008UL, 0, 16, 4, /* IPRJ */ { 0, USBHI, 0, AFEIF } },
};
-static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, NULL,
NULL, prio_registers, NULL);
void __init plat_irq_setup(void)
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh3/swsusp.S
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+
+#define k0 r0
+#define k1 r1
+#define k2 r2
+#define k3 r3
+#define k4 r4
+
+! swsusp_arch_resume()
+! - copy restore_pblist pages
+! - restore registers from swsusp_arch_regs_cpu0
+
+ENTRY(swsusp_arch_resume)
+ mov.l 1f, r15
+ mov.l 2f, r4
+ mov.l @r4, r4
+
+swsusp_copy_loop:
+ mov r4, r0
+ cmp/eq #0, r0
+ bt swsusp_restore_regs
+
+ mov.l @(PBE_ADDRESS, r4), r2
+ mov.l @(PBE_ORIG_ADDRESS, r4), r5
+
+ mov #(PAGE_SIZE >> 10), r3
+ shll8 r3
+ shlr2 r3 /* PAGE_SIZE / 16 */
+swsusp_copy_page:
+ dt r3
+ mov.l @r2+,r1 /* 16n+0 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+4 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+8 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+12 */
+ mov.l r1,@r5
+ bf/s swsusp_copy_page
+ add #4,r5
+
+ bra swsusp_copy_loop
+ mov.l @(PBE_NEXT, r4), r4
+
+swsusp_restore_regs:
+ ! BL=0: R7->R0 is bank0
+ mov.l 3f, r8
+ mov.l 4f, r5
+ jsr @r5
+ nop
+
+ ! BL=1: R7->R0 is bank1
+ lds k2, pr
+ ldc k3, ssr
+
+ mov.l @r15+, r0
+ mov.l @r15+, r1
+ mov.l @r15+, r2
+ mov.l @r15+, r3
+ mov.l @r15+, r4
+ mov.l @r15+, r5
+ mov.l @r15+, r6
+ mov.l @r15+, r7
+
+ rte
+ nop
+ ! BL=0: R7->R0 is bank0
+
+ .align 2
+1: .long swsusp_arch_regs_cpu0
+2: .long restore_pblist
+3: .long 0x20000000 ! RB=1
+4: .long restore_regs
+
+! swsusp_arch_suspend()
+! - prepare pc for resume, return from function without swsusp_save on resume
+! - save registers in swsusp_arch_regs_cpu0
+! - call swsusp_save write suspend image
+
+ENTRY(swsusp_arch_suspend)
+ sts pr, r0 ! save pr in r0
+ mov r15, r2 ! save sp in r2
+ mov r8, r5 ! save r8 in r5
+ stc sr, r1
+ ldc r1, ssr ! save sr in ssr
+ mov.l 1f, r1
+ ldc r1, spc ! setup pc value for resuming
+ mov.l 5f, r15 ! use swsusp_arch_regs_cpu0 as stack
+ mov.l 6f, r3
+ add r3, r15 ! save from top of structure
+
+ ! BL=0: R7->R0 is bank0
+ mov.l 2f, r3 ! get new SR value for bank1
+ mov #0, r4
+ mov.l 7f, r1
+ jsr @r1 ! switch to bank1 and save bank1 r7->r0
+ not r4, r4
+
+ ! BL=1: R7->R0 is bank1
+ stc r2_bank, k0 ! fetch old sp from r2_bank0
+ mov.l 3f, k4 ! SR bits to clear in k4
+ mov.l 8f, k1
+ jsr @k1 ! switch to bank0 and save all regs
+ stc r0_bank, k3 ! fetch old pr from r0_bank0
+
+ ! BL=0: R7->R0 is bank0
+ mov r2, r15 ! restore old sp
+ mov r5, r8 ! restore old r8
+ stc ssr, r1
+ ldc r1, sr ! restore old sr
+ lds r0, pr ! restore old pr
+ mov.l 4f, r0
+ jmp @r0
+ nop
+
+swsusp_call_save:
+ mov r2, r15 ! restore old sp
+ mov r5, r8 ! restore old r8
+ lds r0, pr ! restore old pr
+ rts
+ mov #0, r0
+
+ .align 2
+1: .long swsusp_call_save
+2: .long 0x20000000 ! RB=1
+3: .long 0xdfffffff ! RB=0
+4: .long swsusp_save
+5: .long swsusp_arch_regs_cpu0
+6: .long SWSUSP_ARCH_REGS_SIZE
+7: .long save_low_regs
+8: .long save_regs
obj-y := probe.o common.o
common-y += $(addprefix ../sh3/, entry.o ex.o)
+obj-$(CONFIG_HIBERNATION) += $(addprefix ../sh3/, swsusp.o)
obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
CPU_HAS_LLSC;
break;
+ case 0x4004:
+ boot_cpu_data.type = CPU_SH7786;
+ boot_cpu_data.icache.ways = 4;
+ boot_cpu_data.dcache.ways = 4;
+ boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_PERF_COUNTER |
+ CPU_HAS_LLSC | CPU_HAS_PTEAEX;
+ break;
case 0x3008:
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
+ /* Shared Period/Carry/Alarm IRQ */
.start = 20,
.flags = IORESOURCE_IRQ,
},
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
+ .irqs = { 23, 23, 23, 0 },
}, {
#endif
.mapbase = 0xffe80000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 40, 41, 43, 42 },
+ .irqs = { 40, 40, 40, 40 },
}, {
.flags = 0,
}
/* interrupt sources */
IRL0, IRL1, IRL2, IRL3, /* only IRLM mode supported */
- HUDI, GPIOI,
- DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2, DMAC_DMTE3,
- DMAC_DMTE4, DMAC_DMTE5, DMAC_DMTE6, DMAC_DMTE7,
- DMAC_DMAE,
+ HUDI, GPIOI, DMAC,
PCIC0_PCISERR, PCIC1_PCIERR, PCIC1_PCIPWDWN, PCIC1_PCIPWON,
PCIC1_PCIDMA0, PCIC1_PCIDMA1, PCIC1_PCIDMA2, PCIC1_PCIDMA3,
- TMU3, TMU4, TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
- RTC_ATI, RTC_PRI, RTC_CUI,
- SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI,
- SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI,
- WDT,
- REF_RCMI, REF_ROVI,
+ TMU3, TMU4, TMU0, TMU1, TMU2, RTC, SCI1, SCIF, WDT, REF,
/* interrupt groups */
- DMAC, PCIC1, TMU2, RTC, SCI1, SCIF, REF,
+ PCIC1,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(HUDI, 0x600), INTC_VECT(GPIOI, 0x620),
INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
- INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
- INTC_VECT(SCI1_ERI, 0x4e0), INTC_VECT(SCI1_RXI, 0x500),
- INTC_VECT(SCI1_TXI, 0x520), INTC_VECT(SCI1_TEI, 0x540),
- INTC_VECT(SCIF_ERI, 0x700), INTC_VECT(SCIF_RXI, 0x720),
- INTC_VECT(SCIF_BRI, 0x740), INTC_VECT(SCIF_TXI, 0x760),
+ INTC_VECT(TMU2, 0x440), INTC_VECT(TMU2, 0x460),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
+ INTC_VECT(SCI1, 0x4e0), INTC_VECT(SCI1, 0x500),
+ INTC_VECT(SCI1, 0x520), INTC_VECT(SCI1, 0x540),
+ INTC_VECT(SCIF, 0x700), INTC_VECT(SCIF, 0x720),
+ INTC_VECT(SCIF, 0x740), INTC_VECT(SCIF, 0x760),
INTC_VECT(WDT, 0x560),
- INTC_VECT(REF_RCMI, 0x580), INTC_VECT(REF_ROVI, 0x5a0),
-};
-
-static struct intc_group groups[] __initdata = {
- INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(SCI1, SCI1_ERI, SCI1_RXI, SCI1_TXI, SCI1_TEI),
- INTC_GROUP(SCIF, SCIF_ERI, SCIF_RXI, SCIF_BRI, SCIF_TXI),
- INTC_GROUP(REF, REF_RCMI, REF_ROVI),
+ INTC_VECT(REF, 0x580), INTC_VECT(REF, 0x5a0),
};
static struct intc_prio_reg prio_registers[] __initdata = {
PCIC1, PCIC0_PCISERR } },
};
-static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups,
+static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, NULL,
NULL, prio_registers, NULL);
/* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */
defined(CONFIG_CPU_SUBTYPE_SH7751) || \
defined(CONFIG_CPU_SUBTYPE_SH7091)
static struct intc_vect vectors_dma4[] __initdata = {
- INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
- INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
- INTC_VECT(DMAC_DMAE, 0x6c0),
-};
-
-static struct intc_group groups_dma4[] __initdata = {
- INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
- DMAC_DMTE3, DMAC_DMAE),
+ INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+ INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+ INTC_VECT(DMAC, 0x6c0),
};
static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4",
- vectors_dma4, groups_dma4,
+ vectors_dma4, NULL,
NULL, prio_registers, NULL);
#endif
/* SH7750R and SH7751R both have 8-channel DMA controllers */
#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || defined(CONFIG_CPU_SUBTYPE_SH7751R)
static struct intc_vect vectors_dma8[] __initdata = {
- INTC_VECT(DMAC_DMTE0, 0x640), INTC_VECT(DMAC_DMTE1, 0x660),
- INTC_VECT(DMAC_DMTE2, 0x680), INTC_VECT(DMAC_DMTE3, 0x6a0),
- INTC_VECT(DMAC_DMTE4, 0x780), INTC_VECT(DMAC_DMTE5, 0x7a0),
- INTC_VECT(DMAC_DMTE6, 0x7c0), INTC_VECT(DMAC_DMTE7, 0x7e0),
- INTC_VECT(DMAC_DMAE, 0x6c0),
-};
-
-static struct intc_group groups_dma8[] __initdata = {
- INTC_GROUP(DMAC, DMAC_DMTE0, DMAC_DMTE1, DMAC_DMTE2,
- DMAC_DMTE3, DMAC_DMTE4, DMAC_DMTE5,
- DMAC_DMTE6, DMAC_DMTE7, DMAC_DMAE),
+ INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+ INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+ INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
+ INTC_VECT(DMAC, 0x7c0), INTC_VECT(DMAC, 0x7e0),
+ INTC_VECT(DMAC, 0x6c0),
};
static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8",
- vectors_dma8, groups_dma8,
+ vectors_dma8, NULL,
NULL, prio_registers, NULL);
#endif
obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786) += setup-sh7786.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7786) := clock-sh7786.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o
pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SH7786) := pinmux-sh7786.o
obj-y += $(clock-y)
obj-$(CONFIG_SMP) += $(smp-y)
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+ *
+ * SH7786 support for the clock framework
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7785
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 4, 1 };
+static int sfc_divisors[] = { 1, 1, 4, 1 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 1,
+ 24, 32, 1, 1, 1, 1, 1, 1 };
+static int mfc_divisors[] = { 1, 1, 4, 1 };
+static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 16, 1,
+ 24, 32, 1, 48, 1, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
+}
+
+static struct clk_ops sh7786_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQMR1) & 0x000f);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 16) & 0x000f);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 28) & 0x0003);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7786_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7786_clk_ops[] = {
+ &sh7786_master_clk_ops,
+ &sh7786_module_clk_ops,
+ &sh7786_bus_clk_ops,
+ &sh7786_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7786_clk_ops))
+ *ops = sh7786_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 20) & 0x0003);
+ clk->rate = clk->parent->rate / sfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk sh7786_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7786_shyway_clk_ops,
+};
+
+static void ddr_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQMR1) >> 12) & 0x0003);
+ clk->rate = clk->parent->rate / mfc_divisors[idx];
+}
+
+static struct clk_ops sh7786_ddr_clk_ops = {
+ .recalc = ddr_clk_recalc,
+};
+
+static struct clk sh7786_ddr_clk = {
+ .name = "ddr_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7786_ddr_clk_ops,
+};
+
+/*
+ * Additional SH7786-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7786_onchip_clocks[] = {
+ &sh7786_shyway_clk,
+ &sh7786_ddr_clk,
+};
+
+static int __init sh7786_clk_init(void)
+{
+ struct clk *clk = clk_get(NULL, "master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh7786_onchip_clocks); i++) {
+ struct clk *clkp = sh7786_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+arch_initcall(sh7786_clk_init);
--- /dev/null
+/*
+ * SH7786 Pinmux
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7785 pinmux
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <cpu/sh7786.h>
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+ PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA,
+ PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+ PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA,
+ PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+ PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA,
+ PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+ PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA,
+ PE7_DATA, PE6_DATA,
+ PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+ PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA,
+ PG7_DATA, PG6_DATA, PG5_DATA,
+ PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+ PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA,
+ PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+ PJ3_DATA, PJ2_DATA, PJ1_DATA,
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PA7_IN, PA6_IN, PA5_IN, PA4_IN,
+ PA3_IN, PA2_IN, PA1_IN, PA0_IN,
+ PB7_IN, PB6_IN, PB5_IN, PB4_IN,
+ PB3_IN, PB2_IN, PB1_IN, PB0_IN,
+ PC7_IN, PC6_IN, PC5_IN, PC4_IN,
+ PC3_IN, PC2_IN, PC1_IN, PC0_IN,
+ PD7_IN, PD6_IN, PD5_IN, PD4_IN,
+ PD3_IN, PD2_IN, PD1_IN, PD0_IN,
+ PE7_IN, PE6_IN,
+ PF7_IN, PF6_IN, PF5_IN, PF4_IN,
+ PF3_IN, PF2_IN, PF1_IN, PF0_IN,
+ PG7_IN, PG6_IN, PG5_IN,
+ PH7_IN, PH6_IN, PH5_IN, PH4_IN,
+ PH3_IN, PH2_IN, PH1_IN, PH0_IN,
+ PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN,
+ PJ3_IN, PJ2_IN, PJ1_IN,
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU,
+ PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU,
+ PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU,
+ PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU,
+ PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU,
+ PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU,
+ PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU,
+ PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU,
+ PE7_IN_PU, PE6_IN_PU,
+ PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU,
+ PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU,
+ PG7_IN_PU, PG6_IN_PU, PG5_IN_PU,
+ PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU,
+ PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU,
+ PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU,
+ PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU,
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT,
+ PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT,
+ PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT,
+ PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT,
+ PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT,
+ PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT,
+ PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT,
+ PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT,
+ PE7_OUT, PE6_OUT,
+ PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT,
+ PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT,
+ PG7_OUT, PG6_OUT, PG5_OUT,
+ PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT,
+ PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT,
+ PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT,
+ PJ3_OUT, PJ2_OUT, PJ1_OUT,
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PA7_FN, PA6_FN, PA5_FN, PA4_FN,
+ PA3_FN, PA2_FN, PA1_FN, PA0_FN,
+ PB7_FN, PB6_FN, PB5_FN, PB4_FN,
+ PB3_FN, PB2_FN, PB1_FN, PB0_FN,
+ PC7_FN, PC6_FN, PC5_FN, PC4_FN,
+ PC3_FN, PC2_FN, PC1_FN, PC0_FN,
+ PD7_FN, PD6_FN, PD5_FN, PD4_FN,
+ PD3_FN, PD2_FN, PD1_FN, PD0_FN,
+ PE7_FN, PE6_FN,
+ PF7_FN, PF6_FN, PF5_FN, PF4_FN,
+ PF3_FN, PF2_FN, PF1_FN, PF0_FN,
+ PG7_FN, PG6_FN, PG5_FN,
+ PH7_FN, PH6_FN, PH5_FN, PH4_FN,
+ PH3_FN, PH2_FN, PH1_FN, PH0_FN,
+ PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN,
+ PJ3_FN, PJ2_FN, PJ1_FN,
+ P1MSEL14_0, P1MSEL14_1,
+ P1MSEL13_0, P1MSEL13_1,
+ P1MSEL12_0, P1MSEL12_1,
+ P1MSEL11_0, P1MSEL11_1,
+ P1MSEL10_0, P1MSEL10_1,
+ P1MSEL9_0, P1MSEL9_1,
+ P1MSEL8_0, P1MSEL8_1,
+ P1MSEL7_0, P1MSEL7_1,
+ P1MSEL6_0, P1MSEL6_1,
+ P1MSEL5_0, P1MSEL5_1,
+ P1MSEL4_0, P1MSEL4_1,
+ P1MSEL3_0, P1MSEL3_1,
+ P1MSEL2_0, P1MSEL2_1,
+ P1MSEL1_0, P1MSEL1_1,
+ P1MSEL0_0, P1MSEL0_1,
+
+ P2MSEL15_0, P2MSEL15_1,
+ P2MSEL14_0, P2MSEL14_1,
+ P2MSEL13_0, P2MSEL13_1,
+ P2MSEL12_0, P2MSEL12_1,
+ P2MSEL11_0, P2MSEL11_1,
+ P2MSEL10_0, P2MSEL10_1,
+ P2MSEL9_0, P2MSEL9_1,
+ P2MSEL8_0, P2MSEL8_1,
+ P2MSEL7_0, P2MSEL7_1,
+ P2MSEL6_0, P2MSEL6_1,
+ P2MSEL5_0, P2MSEL5_1,
+ P2MSEL4_0, P2MSEL4_1,
+ P2MSEL3_0, P2MSEL3_1,
+ P2MSEL2_0, P2MSEL2_1,
+ P2MSEL1_0, P2MSEL1_1,
+ P2MSEL0_0, P2MSEL0_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ CDE_MARK,
+ ETH_MAGIC_MARK,
+ DISP_MARK,
+ ETH_LINK_MARK,
+ DR5_MARK,
+ ETH_TX_ER_MARK,
+ DR4_MARK,
+ ETH_TX_EN_MARK,
+ DR3_MARK,
+ ETH_TXD3_MARK,
+ DR2_MARK,
+ ETH_TXD2_MARK,
+ DR1_MARK,
+ ETH_TXD1_MARK,
+ DR0_MARK,
+ ETH_TXD0_MARK,
+
+ VSYNC_MARK,
+ HSPI_CLK_MARK,
+ ODDF_MARK,
+ HSPI_CS_MARK,
+ DG5_MARK,
+ ETH_MDIO_MARK,
+ DG4_MARK,
+ ETH_RX_CLK_MARK,
+ DG3_MARK,
+ ETH_MDC_MARK,
+ DG2_MARK,
+ ETH_COL_MARK,
+ DG1_MARK,
+ ETH_TX_CLK_MARK,
+ DG0_MARK,
+ ETH_CRS_MARK,
+
+ DCLKIN_MARK,
+ HSPI_RX_MARK,
+ HSYNC_MARK,
+ HSPI_TX_MARK,
+ DB5_MARK,
+ ETH_RXD3_MARK,
+ DB4_MARK,
+ ETH_RXD2_MARK,
+ DB3_MARK,
+ ETH_RXD1_MARK,
+ DB2_MARK,
+ ETH_RXD0_MARK,
+ DB1_MARK,
+ ETH_RX_DV_MARK,
+ DB0_MARK,
+ ETH_RX_ER_MARK,
+
+ DCLKOUT_MARK,
+ SCIF1_SLK_MARK,
+ SCIF1_RXD_MARK,
+ SCIF1_TXD_MARK,
+ DACK1_MARK,
+ BACK_MARK,
+ FALE_MARK,
+ DACK0_MARK,
+ FCLE_MARK,
+ DREQ1_MARK,
+ BREQ_MARK,
+ USB_OVC1_MARK,
+ DREQ0_MARK,
+ USB_OVC0_MARK,
+
+ USB_PENC1_MARK,
+ USB_PENC0_MARK,
+
+ HAC1_SDOUT_MARK,
+ SSI1_SDATA_MARK,
+ SDIF1CMD_MARK,
+ HAC1_SDIN_MARK,
+ SSI1_SCK_MARK,
+ SDIF1CD_MARK,
+ HAC1_SYNC_MARK,
+ SSI1_WS_MARK,
+ SDIF1WP_MARK,
+ HAC1_BITCLK_MARK,
+ SSI1_CLK_MARK,
+ SDIF1CLK_MARK,
+ HAC0_SDOUT_MARK,
+ SSI0_SDATA_MARK,
+ SDIF1D3_MARK,
+ HAC0_SDIN_MARK,
+ SSI0_SCK_MARK,
+ SDIF1D2_MARK,
+ HAC0_SYNC_MARK,
+ SSI0_WS_MARK,
+ SDIF1D1_MARK,
+ HAC0_BITCLK_MARK,
+ SSI0_CLK_MARK,
+ SDIF1D0_MARK,
+
+ SCIF3_SCK_MARK,
+ SSI2_SDATA_MARK,
+ SCIF3_RXD_MARK,
+ TCLK_MARK,
+ SSI2_SCK_MARK,
+ SCIF3_TXD_MARK,
+ HAC_RES_MARK,
+ SSI2_WS_MARK,
+
+ DACK3_MARK,
+ SDIF0CMD_MARK,
+ DACK2_MARK,
+ SDIF0CD_MARK,
+ DREQ3_MARK,
+ SDIF0WP_MARK,
+ SCIF0_CTS_MARK,
+ DREQ2_MARK,
+ SDIF0CLK_MARK,
+ SCIF0_RTS_MARK,
+ IRL7_MARK,
+ SDIF0D3_MARK,
+ SCIF0_SCK_MARK,
+ IRL6_MARK,
+ SDIF0D2_MARK,
+ SCIF0_RXD_MARK,
+ IRL5_MARK,
+ SDIF0D1_MARK,
+ SCIF0_TXD_MARK,
+ IRL4_MARK,
+ SDIF0D0_MARK,
+
+ SCIF5_SCK_MARK,
+ FRB_MARK,
+ SCIF5_RXD_MARK,
+ IOIS16_MARK,
+ SCIF5_TXD_MARK,
+ CE2B_MARK,
+ DRAK3_MARK,
+ CE2A_MARK,
+ SCIF4_SCK_MARK,
+ DRAK2_MARK,
+ SSI3_WS_MARK,
+ SCIF4_RXD_MARK,
+ DRAK1_MARK,
+ SSI3_SDATA_MARK,
+ FSTATUS_MARK,
+ SCIF4_TXD_MARK,
+ DRAK0_MARK,
+ SSI3_SCK_MARK,
+ FSE_MARK,
+ PINMUX_MARK_END,
+};
+
+static pinmux_enum_t pinmux_data[] = {
+
+ /* PA GPIO */
+ PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU),
+ PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU),
+ PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU),
+ PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU),
+ PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU),
+ PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU),
+ PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU),
+ PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU),
+
+ /* PB GPIO */
+ PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU),
+ PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU),
+ PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU),
+ PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU),
+ PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU),
+ PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU),
+ PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU),
+ PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU),
+
+ /* PC GPIO */
+ PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU),
+ PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU),
+ PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU),
+ PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU),
+ PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU),
+ PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU),
+ PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU),
+ PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU),
+
+ /* PD GPIO */
+ PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU),
+ PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU),
+ PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU),
+ PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU),
+ PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU),
+ PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU),
+ PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU),
+ PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU),
+
+ /* PE GPIO */
+ PINMUX_DATA(PE7_DATA, PE7_IN, PE7_OUT, PE7_IN_PU),
+ PINMUX_DATA(PE6_DATA, PE6_IN, PE6_OUT, PE6_IN_PU),
+
+ /* PF GPIO */
+ PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU),
+ PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU),
+ PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU),
+ PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU),
+ PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU),
+ PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU),
+ PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU),
+ PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU),
+
+ /* PG GPIO */
+ PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU),
+ PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU),
+ PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU),
+
+ /* PH GPIO */
+ PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU),
+ PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU),
+ PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU),
+ PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU),
+ PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU),
+ PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU),
+ PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU),
+ PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU),
+
+ /* PJ GPIO */
+ PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU),
+ PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU),
+ PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU),
+ PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU),
+ PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU),
+ PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU),
+ PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU),
+
+ /* PA FN */
+ PINMUX_MARK_BEGIN,
+ PINMUX_DATA(CDE_MARK, P1MSEL2_0, PA7_FN),
+ PINMUX_DATA(DISP_MARK, P1MSEL2_0, PA6_FN),
+ PINMUX_DATA(DR5_MARK, P1MSEL2_0, PA5_FN),
+ PINMUX_DATA(DR4_MARK, P1MSEL2_0, PA4_FN),
+ PINMUX_DATA(DR3_MARK, P1MSEL2_0, PA3_FN),
+ PINMUX_DATA(DR2_MARK, P1MSEL2_0, PA2_FN),
+ PINMUX_DATA(DR1_MARK, P1MSEL2_0, PA1_FN),
+ PINMUX_DATA(DR0_MARK, P1MSEL2_0, PA0_FN),
+ PINMUX_DATA(ETH_MAGIC_MARK, P1MSEL2_1, PA7_FN),
+ PINMUX_DATA(ETH_LINK_MARK, P1MSEL2_1, PA6_FN),
+ PINMUX_DATA(ETH_TX_ER_MARK, P1MSEL2_1, PA5_FN),
+ PINMUX_DATA(ETH_TX_EN_MARK, P1MSEL2_1, PA4_FN),
+ PINMUX_DATA(ETH_TXD3_MARK, P1MSEL2_1, PA3_FN),
+ PINMUX_DATA(ETH_TXD2_MARK, P1MSEL2_1, PA2_FN),
+ PINMUX_DATA(ETH_TXD1_MARK, P1MSEL2_1, PA1_FN),
+ PINMUX_DATA(ETH_TXD0_MARK, P1MSEL2_1, PA0_FN),
+
+ /* PB FN */
+ PINMUX_DATA(VSYNC_MARK, P1MSEL3_0, PB7_FN),
+ PINMUX_DATA(ODDF_MARK, P1MSEL3_0, PB6_FN),
+ PINMUX_DATA(DG5_MARK, P1MSEL2_0, PB5_FN),
+ PINMUX_DATA(DG4_MARK, P1MSEL2_0, PB4_FN),
+ PINMUX_DATA(DG3_MARK, P1MSEL2_0, PB3_FN),
+ PINMUX_DATA(DG2_MARK, P1MSEL2_0, PB2_FN),
+ PINMUX_DATA(DG1_MARK, P1MSEL2_0, PB1_FN),
+ PINMUX_DATA(DG0_MARK, P1MSEL2_0, PB0_FN),
+ PINMUX_DATA(HSPI_CLK_MARK, P1MSEL3_1, PB7_FN),
+ PINMUX_DATA(HSPI_CS_MARK, P1MSEL3_1, PB6_FN),
+ PINMUX_DATA(ETH_MDIO_MARK, P1MSEL2_1, PB5_FN),
+ PINMUX_DATA(ETH_RX_CLK_MARK, P1MSEL2_1, PB4_FN),
+ PINMUX_DATA(ETH_MDC_MARK, P1MSEL2_1, PB3_FN),
+ PINMUX_DATA(ETH_COL_MARK, P1MSEL2_1, PB2_FN),
+ PINMUX_DATA(ETH_TX_CLK_MARK, P1MSEL2_1, PB1_FN),
+ PINMUX_DATA(ETH_CRS_MARK, P1MSEL2_1, PB0_FN),
+
+ /* PC FN */
+ PINMUX_DATA(DCLKIN_MARK, P1MSEL3_0, PC7_FN),
+ PINMUX_DATA(HSYNC_MARK, P1MSEL3_0, PC6_FN),
+ PINMUX_DATA(DB5_MARK, P1MSEL2_0, PC5_FN),
+ PINMUX_DATA(DB4_MARK, P1MSEL2_0, PC4_FN),
+ PINMUX_DATA(DB3_MARK, P1MSEL2_0, PC3_FN),
+ PINMUX_DATA(DB2_MARK, P1MSEL2_0, PC2_FN),
+ PINMUX_DATA(DB1_MARK, P1MSEL2_0, PC1_FN),
+ PINMUX_DATA(DB0_MARK, P1MSEL2_0, PC0_FN),
+
+ PINMUX_DATA(HSPI_RX_MARK, P1MSEL3_1, PC7_FN),
+ PINMUX_DATA(HSPI_TX_MARK, P1MSEL3_1, PC6_FN),
+ PINMUX_DATA(ETH_RXD3_MARK, P1MSEL2_1, PC5_FN),
+ PINMUX_DATA(ETH_RXD2_MARK, P1MSEL2_1, PC4_FN),
+ PINMUX_DATA(ETH_RXD1_MARK, P1MSEL2_1, PC3_FN),
+ PINMUX_DATA(ETH_RXD0_MARK, P1MSEL2_1, PC2_FN),
+ PINMUX_DATA(ETH_RX_DV_MARK, P1MSEL2_1, PC1_FN),
+ PINMUX_DATA(ETH_RX_ER_MARK, P1MSEL2_1, PC0_FN),
+
+ /* PD FN */
+ PINMUX_DATA(DCLKOUT_MARK, PD7_FN),
+ PINMUX_DATA(SCIF1_SLK_MARK, PD6_FN),
+ PINMUX_DATA(SCIF1_RXD_MARK, PD5_FN),
+ PINMUX_DATA(SCIF1_TXD_MARK, PD4_FN),
+ PINMUX_DATA(DACK1_MARK, P1MSEL13_1, P1MSEL12_0, PD3_FN),
+ PINMUX_DATA(BACK_MARK, P1MSEL13_0, P1MSEL12_1, PD3_FN),
+ PINMUX_DATA(FALE_MARK, P1MSEL13_0, P1MSEL12_0, PD3_FN),
+ PINMUX_DATA(DACK0_MARK, P1MSEL14_1, PD2_FN),
+ PINMUX_DATA(FCLE_MARK, P1MSEL14_0, PD2_FN),
+ PINMUX_DATA(DREQ1_MARK, P1MSEL10_0, P1MSEL9_1, PD1_FN),
+ PINMUX_DATA(BREQ_MARK, P1MSEL10_1, P1MSEL9_0, PD1_FN),
+ PINMUX_DATA(USB_OVC1_MARK, P1MSEL10_0, P1MSEL9_0, PD1_FN),
+ PINMUX_DATA(DREQ0_MARK, P1MSEL11_1, PD0_FN),
+ PINMUX_DATA(USB_OVC0_MARK, P1MSEL11_0, PD0_FN),
+
+ /* PE FN */
+ PINMUX_DATA(USB_PENC1_MARK, PE7_FN),
+ PINMUX_DATA(USB_PENC0_MARK, PE6_FN),
+
+ /* PF FN */
+ PINMUX_DATA(HAC1_SDOUT_MARK, P2MSEL15_0, P2MSEL14_0, PF7_FN),
+ PINMUX_DATA(HAC1_SDIN_MARK, P2MSEL15_0, P2MSEL14_0, PF6_FN),
+ PINMUX_DATA(HAC1_SYNC_MARK, P2MSEL15_0, P2MSEL14_0, PF5_FN),
+ PINMUX_DATA(HAC1_BITCLK_MARK, P2MSEL15_0, P2MSEL14_0, PF4_FN),
+ PINMUX_DATA(HAC0_SDOUT_MARK, P2MSEL13_0, P2MSEL12_0, PF3_FN),
+ PINMUX_DATA(HAC0_SDIN_MARK, P2MSEL13_0, P2MSEL12_0, PF2_FN),
+ PINMUX_DATA(HAC0_SYNC_MARK, P2MSEL13_0, P2MSEL12_0, PF1_FN),
+ PINMUX_DATA(HAC0_BITCLK_MARK, P2MSEL13_0, P2MSEL12_0, PF0_FN),
+ PINMUX_DATA(SSI1_SDATA_MARK, P2MSEL15_0, P2MSEL14_1, PF7_FN),
+ PINMUX_DATA(SSI1_SCK_MARK, P2MSEL15_0, P2MSEL14_1, PF6_FN),
+ PINMUX_DATA(SSI1_WS_MARK, P2MSEL15_0, P2MSEL14_1, PF5_FN),
+ PINMUX_DATA(SSI1_CLK_MARK, P2MSEL15_0, P2MSEL14_1, PF4_FN),
+ PINMUX_DATA(SSI0_SDATA_MARK, P2MSEL13_0, P2MSEL12_1, PF3_FN),
+ PINMUX_DATA(SSI0_SCK_MARK, P2MSEL13_0, P2MSEL12_1, PF2_FN),
+ PINMUX_DATA(SSI0_WS_MARK, P2MSEL13_0, P2MSEL12_1, PF1_FN),
+ PINMUX_DATA(SSI0_CLK_MARK, P2MSEL13_0, P2MSEL12_1, PF0_FN),
+ PINMUX_DATA(SDIF1CMD_MARK, P2MSEL15_1, P2MSEL14_0, PF7_FN),
+ PINMUX_DATA(SDIF1CD_MARK, P2MSEL15_1, P2MSEL14_0, PF6_FN),
+ PINMUX_DATA(SDIF1WP_MARK, P2MSEL15_1, P2MSEL14_0, PF5_FN),
+ PINMUX_DATA(SDIF1CLK_MARK, P2MSEL15_1, P2MSEL14_0, PF4_FN),
+ PINMUX_DATA(SDIF1D3_MARK, P2MSEL13_1, P2MSEL12_0, PF3_FN),
+ PINMUX_DATA(SDIF1D2_MARK, P2MSEL13_1, P2MSEL12_0, PF2_FN),
+ PINMUX_DATA(SDIF1D1_MARK, P2MSEL13_1, P2MSEL12_0, PF1_FN),
+ PINMUX_DATA(SDIF1D0_MARK, P2MSEL13_1, P2MSEL12_0, PF0_FN),
+
+ /* PG FN */
+ PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL8_0, PG7_FN),
+ PINMUX_DATA(SSI2_SDATA_MARK, P1MSEL8_1, PG7_FN),
+ PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL7_0, P1MSEL6_0, PG6_FN),
+ PINMUX_DATA(SSI2_SCK_MARK, P1MSEL7_1, P1MSEL6_0, PG6_FN),
+ PINMUX_DATA(TCLK_MARK, P1MSEL7_0, P1MSEL6_1, PG6_FN),
+ PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL5_0, P1MSEL4_0, PG5_FN),
+ PINMUX_DATA(SSI2_WS_MARK, P1MSEL5_1, P1MSEL4_0, PG5_FN),
+ PINMUX_DATA(HAC_RES_MARK, P1MSEL5_0, P1MSEL4_1, PG5_FN),
+
+ /* PH FN */
+ PINMUX_DATA(DACK3_MARK, P2MSEL4_0, PH7_FN),
+ PINMUX_DATA(SDIF0CMD_MARK, P2MSEL4_1, PH7_FN),
+ PINMUX_DATA(DACK2_MARK, P2MSEL4_0, PH6_FN),
+ PINMUX_DATA(SDIF0CD_MARK, P2MSEL4_1, PH6_FN),
+ PINMUX_DATA(DREQ3_MARK, P2MSEL4_0, PH5_FN),
+ PINMUX_DATA(SDIF0WP_MARK, P2MSEL4_1, PH5_FN),
+ PINMUX_DATA(DREQ2_MARK, P2MSEL3_0, P2MSEL2_1, PH4_FN),
+ PINMUX_DATA(SDIF0CLK_MARK, P2MSEL3_1, P2MSEL2_0, PH4_FN),
+ PINMUX_DATA(SCIF0_CTS_MARK, P2MSEL3_0, P2MSEL2_0, PH4_FN),
+ PINMUX_DATA(SDIF0D3_MARK, P2MSEL1_1, P2MSEL0_0, PH3_FN),
+ PINMUX_DATA(SCIF0_RTS_MARK, P2MSEL1_0, P2MSEL0_0, PH3_FN),
+ PINMUX_DATA(IRL7_MARK, P2MSEL1_0, P2MSEL0_1, PH3_FN),
+ PINMUX_DATA(SDIF0D2_MARK, P2MSEL1_1, P2MSEL0_0, PH2_FN),
+ PINMUX_DATA(SCIF0_SCK_MARK, P2MSEL1_0, P2MSEL0_0, PH2_FN),
+ PINMUX_DATA(IRL6_MARK, P2MSEL1_0, P2MSEL0_1, PH2_FN),
+ PINMUX_DATA(SDIF0D1_MARK, P2MSEL1_1, P2MSEL0_0, PH1_FN),
+ PINMUX_DATA(SCIF0_RXD_MARK, P2MSEL1_0, P2MSEL0_0, PH1_FN),
+ PINMUX_DATA(IRL5_MARK, P2MSEL1_0, P2MSEL0_1, PH1_FN),
+ PINMUX_DATA(SDIF0D0_MARK, P2MSEL1_1, P2MSEL0_0, PH0_FN),
+ PINMUX_DATA(SCIF0_TXD_MARK, P2MSEL1_0, P2MSEL0_0, PH0_FN),
+ PINMUX_DATA(IRL4_MARK, P2MSEL1_0, P2MSEL0_1, PH0_FN),
+
+ /* PJ FN */
+ PINMUX_DATA(SCIF5_SCK_MARK, P2MSEL11_1, PJ7_FN),
+ PINMUX_DATA(FRB_MARK, P2MSEL11_0, PJ7_FN),
+ PINMUX_DATA(SCIF5_RXD_MARK, P2MSEL10_0, PJ6_FN),
+ PINMUX_DATA(IOIS16_MARK, P2MSEL10_1, PJ6_FN),
+ PINMUX_DATA(SCIF5_TXD_MARK, P2MSEL10_0, PJ5_FN),
+ PINMUX_DATA(CE2B_MARK, P2MSEL10_1, PJ5_FN),
+ PINMUX_DATA(DRAK3_MARK, P2MSEL7_0, PJ4_FN),
+ PINMUX_DATA(CE2A_MARK, P2MSEL7_1, PJ4_FN),
+ PINMUX_DATA(SCIF4_SCK_MARK, P2MSEL9_0, P2MSEL8_0, PJ3_FN),
+ PINMUX_DATA(DRAK2_MARK, P2MSEL9_0, P2MSEL8_1, PJ3_FN),
+ PINMUX_DATA(SSI3_WS_MARK, P2MSEL9_1, P2MSEL8_0, PJ3_FN),
+ PINMUX_DATA(SCIF4_RXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ2_FN),
+ PINMUX_DATA(DRAK1_MARK, P2MSEL6_0, P2MSEL5_1, PJ2_FN),
+ PINMUX_DATA(FSTATUS_MARK, P2MSEL6_0, P2MSEL5_0, PJ2_FN),
+ PINMUX_DATA(SSI3_SDATA_MARK, P2MSEL6_1, P2MSEL5_1, PJ2_FN),
+ PINMUX_DATA(SCIF4_TXD_MARK, P2MSEL6_1, P2MSEL5_0, PJ1_FN),
+ PINMUX_DATA(DRAK0_MARK, P2MSEL6_0, P2MSEL5_1, PJ1_FN),
+ PINMUX_DATA(FSE_MARK, P2MSEL6_0, P2MSEL5_0, PJ1_FN),
+ PINMUX_DATA(SSI3_SCK_MARK, P2MSEL6_1, P2MSEL5_1, PJ1_FN),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ /* PA */
+ PINMUX_GPIO(GPIO_PA7, PA7_DATA),
+ PINMUX_GPIO(GPIO_PA6, PA6_DATA),
+ PINMUX_GPIO(GPIO_PA5, PA5_DATA),
+ PINMUX_GPIO(GPIO_PA4, PA4_DATA),
+ PINMUX_GPIO(GPIO_PA3, PA3_DATA),
+ PINMUX_GPIO(GPIO_PA2, PA2_DATA),
+ PINMUX_GPIO(GPIO_PA1, PA1_DATA),
+ PINMUX_GPIO(GPIO_PA0, PA0_DATA),
+
+ /* PB */
+ PINMUX_GPIO(GPIO_PB7, PB7_DATA),
+ PINMUX_GPIO(GPIO_PB6, PB6_DATA),
+ PINMUX_GPIO(GPIO_PB5, PB5_DATA),
+ PINMUX_GPIO(GPIO_PB4, PB4_DATA),
+ PINMUX_GPIO(GPIO_PB3, PB3_DATA),
+ PINMUX_GPIO(GPIO_PB2, PB2_DATA),
+ PINMUX_GPIO(GPIO_PB1, PB1_DATA),
+ PINMUX_GPIO(GPIO_PB0, PB0_DATA),
+
+ /* PC */
+ PINMUX_GPIO(GPIO_PC7, PC7_DATA),
+ PINMUX_GPIO(GPIO_PC6, PC6_DATA),
+ PINMUX_GPIO(GPIO_PC5, PC5_DATA),
+ PINMUX_GPIO(GPIO_PC4, PC4_DATA),
+ PINMUX_GPIO(GPIO_PC3, PC3_DATA),
+ PINMUX_GPIO(GPIO_PC2, PC2_DATA),
+ PINMUX_GPIO(GPIO_PC1, PC1_DATA),
+ PINMUX_GPIO(GPIO_PC0, PC0_DATA),
+
+ /* PD */
+ PINMUX_GPIO(GPIO_PD7, PD7_DATA),
+ PINMUX_GPIO(GPIO_PD6, PD6_DATA),
+ PINMUX_GPIO(GPIO_PD5, PD5_DATA),
+ PINMUX_GPIO(GPIO_PD4, PD4_DATA),
+ PINMUX_GPIO(GPIO_PD3, PD3_DATA),
+ PINMUX_GPIO(GPIO_PD2, PD2_DATA),
+ PINMUX_GPIO(GPIO_PD1, PD1_DATA),
+ PINMUX_GPIO(GPIO_PD0, PD0_DATA),
+
+ /* PE */
+ PINMUX_GPIO(GPIO_PE5, PE7_DATA),
+ PINMUX_GPIO(GPIO_PE4, PE6_DATA),
+
+ /* PF */
+ PINMUX_GPIO(GPIO_PF7, PF7_DATA),
+ PINMUX_GPIO(GPIO_PF6, PF6_DATA),
+ PINMUX_GPIO(GPIO_PF5, PF5_DATA),
+ PINMUX_GPIO(GPIO_PF4, PF4_DATA),
+ PINMUX_GPIO(GPIO_PF3, PF3_DATA),
+ PINMUX_GPIO(GPIO_PF2, PF2_DATA),
+ PINMUX_GPIO(GPIO_PF1, PF1_DATA),
+ PINMUX_GPIO(GPIO_PF0, PF0_DATA),
+
+ /* PG */
+ PINMUX_GPIO(GPIO_PG7, PG7_DATA),
+ PINMUX_GPIO(GPIO_PG6, PG6_DATA),
+ PINMUX_GPIO(GPIO_PG5, PG5_DATA),
+
+ /* PH */
+ PINMUX_GPIO(GPIO_PH7, PH7_DATA),
+ PINMUX_GPIO(GPIO_PH6, PH6_DATA),
+ PINMUX_GPIO(GPIO_PH5, PH5_DATA),
+ PINMUX_GPIO(GPIO_PH4, PH4_DATA),
+ PINMUX_GPIO(GPIO_PH3, PH3_DATA),
+ PINMUX_GPIO(GPIO_PH2, PH2_DATA),
+ PINMUX_GPIO(GPIO_PH1, PH1_DATA),
+ PINMUX_GPIO(GPIO_PH0, PH0_DATA),
+
+ /* PJ */
+ PINMUX_GPIO(GPIO_PJ7, PJ7_DATA),
+ PINMUX_GPIO(GPIO_PJ6, PJ6_DATA),
+ PINMUX_GPIO(GPIO_PJ5, PJ5_DATA),
+ PINMUX_GPIO(GPIO_PJ4, PJ4_DATA),
+ PINMUX_GPIO(GPIO_PJ3, PJ3_DATA),
+ PINMUX_GPIO(GPIO_PJ2, PJ2_DATA),
+ PINMUX_GPIO(GPIO_PJ1, PJ1_DATA),
+
+ /* FN */
+ PINMUX_GPIO(GPIO_FN_CDE, CDE_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_MAGIC, ETH_MAGIC_MARK),
+ PINMUX_GPIO(GPIO_FN_DISP, DISP_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_LINK, ETH_LINK_MARK),
+ PINMUX_GPIO(GPIO_FN_DR5, DR5_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TX_ER, ETH_TX_ER_MARK),
+ PINMUX_GPIO(GPIO_FN_DR4, DR4_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TX_EN, ETH_TX_EN_MARK),
+ PINMUX_GPIO(GPIO_FN_DR3, DR3_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TXD3, ETH_TXD3_MARK),
+ PINMUX_GPIO(GPIO_FN_DR2, DR2_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TXD2, ETH_TXD2_MARK),
+ PINMUX_GPIO(GPIO_FN_DR1, DR1_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TXD1, ETH_TXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_DR0, DR0_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TXD0, ETH_TXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_VSYNC, VSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_ODDF, ODDF_MARK),
+ PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK),
+ PINMUX_GPIO(GPIO_FN_DG5, DG5_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_MDIO, ETH_MDIO_MARK),
+ PINMUX_GPIO(GPIO_FN_DG4, DG4_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RX_CLK, ETH_RX_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_DG3, DG3_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_MDC, ETH_MDC_MARK),
+ PINMUX_GPIO(GPIO_FN_DG2, DG2_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_COL, ETH_COL_MARK),
+ PINMUX_GPIO(GPIO_FN_DG1, DG1_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_TX_CLK, ETH_TX_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_DG0, DG0_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_CRS, ETH_CRS_MARK),
+ PINMUX_GPIO(GPIO_FN_DCLKIN, DCLKIN_MARK),
+ PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK),
+ PINMUX_GPIO(GPIO_FN_HSYNC, HSYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK),
+ PINMUX_GPIO(GPIO_FN_DB5, DB5_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RXD3, ETH_RXD3_MARK),
+ PINMUX_GPIO(GPIO_FN_DB4, DB4_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RXD2, ETH_RXD2_MARK),
+ PINMUX_GPIO(GPIO_FN_DB3, DB3_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RXD1, ETH_RXD1_MARK),
+ PINMUX_GPIO(GPIO_FN_DB2, DB2_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RXD0, ETH_RXD0_MARK),
+ PINMUX_GPIO(GPIO_FN_DB1, DB1_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RX_DV, ETH_RX_DV_MARK),
+ PINMUX_GPIO(GPIO_FN_DB0, DB0_MARK),
+ PINMUX_GPIO(GPIO_FN_ETH_RX_ER, ETH_RX_ER_MARK),
+ PINMUX_GPIO(GPIO_FN_DCLKOUT, DCLKOUT_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_SLK, SCIF1_SLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_DACK1, DACK1_MARK),
+ PINMUX_GPIO(GPIO_FN_BACK, BACK_MARK),
+ PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK),
+ PINMUX_GPIO(GPIO_FN_DACK0, DACK0_MARK),
+ PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK),
+ PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK),
+ PINMUX_GPIO(GPIO_FN_BREQ, BREQ_MARK),
+ PINMUX_GPIO(GPIO_FN_USB_OVC1, USB_OVC1_MARK),
+ PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK),
+ PINMUX_GPIO(GPIO_FN_USB_OVC0, USB_OVC0_MARK),
+ PINMUX_GPIO(GPIO_FN_USB_PENC1, USB_PENC1_MARK),
+ PINMUX_GPIO(GPIO_FN_USB_PENC0, USB_PENC0_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1CMD, SDIF1CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1CD, SDIF1CD_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1WP, SDIF1WP_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1CLK, SDIF1CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1D3, SDIF1D3_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1D2, SDIF1D2_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1D1, SDIF1D1_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF1D0, SDIF1D0_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI2_SDATA, SSI2_SDATA_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI2_SCK, SSI2_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI2_WS, SSI2_WS_MARK),
+ PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0CMD, SDIF0CMD_MARK),
+ PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0CD, SDIF0CD_MARK),
+ PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0WP, SDIF0WP_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK),
+ PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0CLK, SDIF0CLK_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK),
+ PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0D3, SDIF0D3_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0D2, SDIF0D2_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0D1, SDIF0D1_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK),
+ PINMUX_GPIO(GPIO_FN_SDIF0D0, SDIF0D0_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK),
+ PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK),
+ PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI3_WS, SSI3_WS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK),
+ PINMUX_GPIO(GPIO_FN_DRAK1, DRAK1_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI3_SDATA, SSI3_SDATA_MARK),
+ PINMUX_GPIO(GPIO_FN_FSTATUS, FSTATUS_MARK),
+ PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK),
+ PINMUX_GPIO(GPIO_FN_DRAK0, DRAK0_MARK),
+ PINMUX_GPIO(GPIO_FN_SSI3_SCK, SSI3_SCK_MARK),
+ PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ { PINMUX_CFG_REG("PACR", 0xffcc0000, 16, 2) {
+ PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU,
+ PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU,
+ PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU,
+ PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU,
+ PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU,
+ PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU,
+ PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU,
+ PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PBCR", 0xffcc0002, 16, 2) {
+ PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU,
+ PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU,
+ PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU,
+ PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU,
+ PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU,
+ PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU,
+ PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU,
+ PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PCCR", 0xffcc0004, 16, 2) {
+ PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU,
+ PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU,
+ PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU,
+ PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU,
+ PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU,
+ PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU,
+ PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU,
+ PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PDCR", 0xffcc0006, 16, 2) {
+ PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU,
+ PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU,
+ PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU,
+ PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU,
+ PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU,
+ PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU,
+ PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU,
+ PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PECR", 0xffcc0008, 16, 2) {
+ PE7_FN, PE7_OUT, PE7_IN, PE7_IN_PU,
+ PE6_FN, PE6_OUT, PE6_IN, PE6_IN_PU,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG("PFCR", 0xffcc000a, 16, 2) {
+ PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU,
+ PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU,
+ PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU,
+ PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU,
+ PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU,
+ PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU,
+ PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU,
+ PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PGCR", 0xffcc000c, 16, 2) {
+ PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU,
+ PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU,
+ PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG("PHCR", 0xffcc000e, 16, 2) {
+ PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU,
+ PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU,
+ PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU,
+ PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU,
+ PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU,
+ PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU,
+ PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU,
+ PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU }
+ },
+ { PINMUX_CFG_REG("PJCR", 0xffcc0010, 16, 2) {
+ PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU,
+ PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU,
+ PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU,
+ PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU,
+ PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU,
+ PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU,
+ PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU,
+ 0, 0, 0, 0, }
+ },
+ { PINMUX_CFG_REG("P1MSELR", 0xffcc0080, 16, 1) {
+ 0, 0,
+ P1MSEL14_0, P1MSEL14_1,
+ P1MSEL13_0, P1MSEL13_1,
+ P1MSEL12_0, P1MSEL12_1,
+ P1MSEL11_0, P1MSEL11_1,
+ P1MSEL10_0, P1MSEL10_1,
+ P1MSEL9_0, P1MSEL9_1,
+ P1MSEL8_0, P1MSEL8_1,
+ P1MSEL7_0, P1MSEL7_1,
+ P1MSEL6_0, P1MSEL6_1,
+ P1MSEL5_0, P1MSEL5_1,
+ P1MSEL4_0, P1MSEL4_1,
+ P1MSEL3_0, P1MSEL3_1,
+ P1MSEL2_0, P1MSEL2_1,
+ P1MSEL1_0, P1MSEL1_1,
+ P1MSEL0_0, P1MSEL0_1 }
+ },
+ { PINMUX_CFG_REG("P2MSELR", 0xffcc0082, 16, 1) {
+ P2MSEL15_0, P2MSEL15_1,
+ P2MSEL14_0, P2MSEL14_1,
+ P2MSEL13_0, P2MSEL13_1,
+ P2MSEL12_0, P2MSEL12_1,
+ P2MSEL11_0, P2MSEL11_1,
+ P2MSEL10_0, P2MSEL10_1,
+ P2MSEL9_0, P2MSEL9_1,
+ P2MSEL8_0, P2MSEL8_1,
+ P2MSEL7_0, P2MSEL7_1,
+ P2MSEL6_0, P2MSEL6_1,
+ P2MSEL5_0, P2MSEL5_1,
+ P2MSEL4_0, P2MSEL4_1,
+ P2MSEL3_0, P2MSEL3_1,
+ P2MSEL2_0, P2MSEL2_1,
+ P2MSEL1_0, P2MSEL1_1,
+ P2MSEL0_0, P2MSEL0_1 }
+ },
+ {}
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PADR", 0xffcc0020, 8) {
+ PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA,
+ PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA }
+ },
+ { PINMUX_DATA_REG("PBDR", 0xffcc0022, 8) {
+ PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA,
+ PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA }
+ },
+ { PINMUX_DATA_REG("PCDR", 0xffcc0024, 8) {
+ PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA,
+ PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA }
+ },
+ { PINMUX_DATA_REG("PDDR", 0xffcc0026, 8) {
+ PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA,
+ PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA }
+ },
+ { PINMUX_DATA_REG("PEDR", 0xffcc0028, 8) {
+ PE7_DATA, PE6_DATA,
+ 0, 0, 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PFDR", 0xffcc002a, 8) {
+ PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA,
+ PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA }
+ },
+ { PINMUX_DATA_REG("PGDR", 0xffcc002c, 8) {
+ PG7_DATA, PG6_DATA, PG5_DATA, 0,
+ 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PHDR", 0xffcc002e, 8) {
+ PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA,
+ PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA }
+ },
+ { PINMUX_DATA_REG("PJDR", 0xffcc0030, 8) {
+ PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA,
+ PJ3_DATA, PJ2_DATA, PJ1_DATA, 0 }
+ },
+ { },
+};
+
+static struct pinmux_info sh7786_pinmux_info = {
+ .name = "sh7786_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PA7,
+ .last_gpio = GPIO_FN_FSE,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+static int __init plat_pinmux_setup(void)
+{
+ return register_pinmux(&sh7786_pinmux_info);
+}
+
+arch_initcall(plat_pinmux_setup);
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
#include <asm/clock.h>
static struct resource iic0_resources[] = {
.num_resources = ARRAY_SIZE(jpu_resources),
};
+static struct sh_cmt_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7343_devices[] __initdata = {
+ &cmt_device,
&iic0_device,
&iic1_device,
&sci_device,
#include <linux/serial.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
#include <asm/clock.h>
static struct resource iic_resources[] = {
.num_resources = ARRAY_SIZE(veu1_resources),
};
+static struct sh_cmt_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7366_devices[] __initdata = {
+ &cmt_device,
&iic_device,
&sci_device,
&usb_host_device,
#include <linux/serial_sci.h>
#include <linux/mm.h>
#include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
.num_resources = ARRAY_SIZE(jpu_resources),
};
+static struct sh_cmt_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7722_devices[] __initdata = {
+ &cmt_device,
&rtc_device,
&usbf_device,
&iic_device,
#include <linux/mm.h>
#include <linux/serial_sci.h>
#include <linux/uio_driver.h>
+#include <linux/sh_cmt.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
.num_resources = ARRAY_SIZE(veu1_resources),
};
+static struct sh_cmt_config cmt_platform_data = {
+ .name = "CMT",
+ .channel_offset = 0x60,
+ .timer_bit = 5,
+ .clk = "cmt0",
+ .clockevent_rating = 125,
+ .clocksource_rating = 200,
+};
+
+static struct resource cmt_resources[] = {
+ [0] = {
+ .name = "CMT",
+ .start = 0x044a0060,
+ .end = 0x044a006b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt_platform_data,
+ },
+ .resource = cmt_resources,
+ .num_resources = ARRAY_SIZE(cmt_resources),
+};
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
};
static struct platform_device *sh7723_devices[] __initdata = {
+ &cmt_device,
&sci_device,
&rtc_device,
&iic_device,
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Yoshihiro Shimoda
- * Copyright (C) 2008 Nobuhiro Iwamatsu
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = 20,
+ /* Shared Period/Carry/Alarm IRQ */
+ .start = 20,
.flags = IORESOURCE_IRQ,
},
};
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 40, 41, 43, 42 },
+ .irqs = { 40, 40, 40, 40 },
}, {
.mapbase = 0xffe08000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 76, 77, 79, 78 },
+ .irqs = { 76, 76, 76, 76 },
}, {
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 104, 105, 107, 106 },
+ .irqs = { 104, 104, 104, 104 },
}, {
.flags = 0,
}
IRL_HHLL, IRL_HHLH, IRL_HHHL,
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC_ATI, RTC_PRI, RTC_CUI,
- WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI, LCDC,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- DMAC0_DMINT4, DMAC0_DMINT5,
- IIC0, IIC1,
- CMT,
- GEINT0, GEINT1, GEINT2,
- HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
- PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
- STIF0, STIF1,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SIOF0, SIOF1, SIOF2,
- USBH, USBFI0, USBFI1,
- TPU, PCC,
- MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
- SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND,
+ RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+ HUDI, LCDC, DMAC, SCIF0, IIC0, IIC1, CMT, GETHER, HAC,
+ PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+ STIF0, STIF1, SCIF1, SIOF0, SIOF1, SIOF2,
+ USBH, USBF, TPU, PCC, MMCIF, SIM,
TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3,
- SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
- GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3,
+ SCIF2, GPIO,
/* interrupt groups */
- TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5,
- SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO,
+ TMU012, TMU345,
};
static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580),
INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0),
INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600),
INTC_VECT(LCDC, 0x620),
- INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
- INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0),
- INTC_VECT(DMAC0_DMAE, 0x6c0),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0),
+ INTC_VECT(DMAC, 0x640), INTC_VECT(DMAC, 0x660),
+ INTC_VECT(DMAC, 0x680), INTC_VECT(DMAC, 0x6a0),
+ INTC_VECT(DMAC, 0x6c0),
+ INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+ INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+ INTC_VECT(DMAC, 0x780), INTC_VECT(DMAC, 0x7a0),
INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0),
- INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920),
- INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960),
+ INTC_VECT(CMT, 0x900), INTC_VECT(GETHER, 0x920),
+ INTC_VECT(GETHER, 0x940), INTC_VECT(GETHER, 0x960),
INTC_VECT(HAC, 0x980),
INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
- INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
- INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+ INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+ INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+ INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60),
- INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0),
- INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0),
+ INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+ INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20),
- INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80),
- INTC_VECT(USBFI1, 0xca0),
+ INTC_VECT(USBH, 0xc60), INTC_VECT(USBF, 0xc80),
+ INTC_VECT(USBF, 0xca0),
INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0),
- INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
- INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
- INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0),
- INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0),
+ INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+ INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+ INTC_VECT(SIM, 0xd80), INTC_VECT(SIM, 0xda0),
+ INTC_VECT(SIM, 0xdc0), INTC_VECT(SIM, 0xde0),
INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
- INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
- INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
- INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
- INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
+ INTC_VECT(SCIF2, 0xf00), INTC_VECT(SCIF2, 0xf20),
+ INTC_VECT(SCIF2, 0xf40), INTC_VECT(SCIF2, 0xf60),
+ INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+ INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
- INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2),
- INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(USBF, USBFI0, USBFI1),
- INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
- INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND),
- INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
- INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
.flags = IORESOURCE_IO,
},
[1] = {
- /* Period IRQ */
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
+ /* Shared Period/Carry/Alarm IRQ */
.start = 20,
.flags = IORESOURCE_IRQ,
},
.mapbase = 0xffe00000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 40, 41, 43, 42 },
+ .irqs = { 40, 40, 40, 40 },
}, {
.mapbase = 0xffe10000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 76, 77, 79, 78 },
+ .irqs = { 76, 76, 76, 76 },
}, {
.flags = 0,
}
IRL_HHLL, IRL_HHLH, IRL_HHHL,
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- RTC_ATI, RTC_PRI, RTC_CUI,
- WDT,
- TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- DMAC0_DMINT4, DMAC0_DMINT5, DMAC1_DMINT6, DMAC1_DMINT7,
- CMT, HAC,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
- PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- SIOF, HSPI,
- MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
- DMAC1_DMINT8, DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11,
- TMU3, TMU4, TMU5,
- SSI,
- FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
- GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+ RTC, WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+ HUDI, DMAC0, SCIF0, DMAC1, CMT, HAC,
+ PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+ SCIF1, SIOF, HSPI, MMCIF, TMU3, TMU4, TMU5, SSI, FLCTL, GPIO,
/* interrupt groups */
- RTC, TMU012, DMAC0, SCIF0, DMAC45, DMAC1,
- PCIC5, SCIF1, MMCIF, TMU345, FLCTL, GPIO,
+ TMU012, TMU345,
};
static struct intc_vect vectors[] __initdata = {
- INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
- INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(RTC, 0x480), INTC_VECT(RTC, 0x4a0),
+ INTC_VECT(RTC, 0x4c0),
INTC_VECT(WDT, 0x560),
INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660),
- INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0),
- INTC_VECT(DMAC0_DMAE, 0x6c0),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0),
- INTC_VECT(DMAC1_DMINT6, 0x7c0), INTC_VECT(DMAC1_DMINT7, 0x7e0),
+ INTC_VECT(DMAC0, 0x640), INTC_VECT(DMAC0, 0x660),
+ INTC_VECT(DMAC0, 0x680), INTC_VECT(DMAC0, 0x6a0),
+ INTC_VECT(DMAC0, 0x6c0),
+ INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+ INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+ INTC_VECT(DMAC0, 0x780), INTC_VECT(DMAC0, 0x7a0),
+ INTC_VECT(DMAC1, 0x7c0), INTC_VECT(DMAC1, 0x7e0),
INTC_VECT(CMT, 0x900), INTC_VECT(HAC, 0x980),
INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
- INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
- INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
- INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0),
- INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0),
+ INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+ INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+ INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
+ INTC_VECT(SCIF1, 0xb80), INTC_VECT(SCIF1, 0xba0),
+ INTC_VECT(SCIF1, 0xbc0), INTC_VECT(SCIF1, 0xbe0),
INTC_VECT(SIOF, 0xc00), INTC_VECT(HSPI, 0xc80),
- INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
- INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
- INTC_VECT(DMAC1_DMINT8, 0xd80), INTC_VECT(DMAC1_DMINT9, 0xda0),
- INTC_VECT(DMAC1_DMINT10, 0xdc0), INTC_VECT(DMAC1_DMINT11, 0xde0),
+ INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+ INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
+ INTC_VECT(DMAC1, 0xd80), INTC_VECT(DMAC1, 0xda0),
+ INTC_VECT(DMAC1, 0xdc0), INTC_VECT(DMAC1, 0xde0),
INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
INTC_VECT(TMU5, 0xe40),
INTC_VECT(SSI, 0xe80),
- INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
- INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
- INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
- INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
+ INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+ INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+ INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+ INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
};
static struct intc_group groups[] __initdata = {
- INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
- DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11),
- INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
- INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
- FLCTL_FLTRQ0, FLCTL_FLTRQ1),
- INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
.mapbase = 0xffea0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 40, 41, 43, 42 },
+ .irqs = { 40, 40, 40, 40 },
}, {
.mapbase = 0xffeb0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
- .irqs = { 44, 45, 47, 46 },
- },
-
- /*
- * The rest of these all have multiplexed IRQs
- */
- {
+ .irqs = { 44, 44, 44, 44 },
+ }, {
.mapbase = 0xffec0000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
- WDT,
- TMU0, TMU1, TMU2, TMU2_TICPI,
- HUDI,
- DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3,
- DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE,
- SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
- SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
- DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8, DMAC1_DMINT9,
- DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE,
- HSPI,
+ WDT, TMU0, TMU1, TMU2, TMU2_TICPI,
+ HUDI, DMAC0, SCIF0, SCIF1, DMAC1, HSPI,
SCIF2, SCIF3, SCIF4, SCIF5,
- PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD,
- PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0,
- SIOF,
- MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY,
- DU,
- GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI,
+ PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, PCIC5,
+ SIOF, MMCIF, DU, GDTA,
TMU3, TMU4, TMU5,
SSI0, SSI1,
HAC0, HAC1,
- FLCTL_FLSTE, FLCTL_FLEND, FLCTL_FLTRQ0, FLCTL_FLTRQ1,
- GPIOI0, GPIOI1, GPIOI2, GPIOI3,
+ FLCTL, GPIO,
/* interrupt groups */
- TMU012, DMAC0, SCIF0, SCIF1, DMAC1,
- PCIC5, MMCIF, GDTA, TMU345, FLCTL, GPIO
+ TMU012, TMU345
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(TMU0, 0x580), INTC_VECT(TMU1, 0x5a0),
INTC_VECT(TMU2, 0x5c0), INTC_VECT(TMU2_TICPI, 0x5e0),
INTC_VECT(HUDI, 0x600),
- INTC_VECT(DMAC0_DMINT0, 0x620), INTC_VECT(DMAC0_DMINT1, 0x640),
- INTC_VECT(DMAC0_DMINT2, 0x660), INTC_VECT(DMAC0_DMINT3, 0x680),
- INTC_VECT(DMAC0_DMINT4, 0x6a0), INTC_VECT(DMAC0_DMINT5, 0x6c0),
- INTC_VECT(DMAC0_DMAE, 0x6e0),
- INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720),
- INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760),
- INTC_VECT(SCIF1_ERI, 0x780), INTC_VECT(SCIF1_RXI, 0x7a0),
- INTC_VECT(SCIF1_BRI, 0x7c0), INTC_VECT(SCIF1_TXI, 0x7e0),
- INTC_VECT(DMAC1_DMINT6, 0x880), INTC_VECT(DMAC1_DMINT7, 0x8a0),
- INTC_VECT(DMAC1_DMINT8, 0x8c0), INTC_VECT(DMAC1_DMINT9, 0x8e0),
- INTC_VECT(DMAC1_DMINT10, 0x900), INTC_VECT(DMAC1_DMINT11, 0x920),
- INTC_VECT(DMAC1_DMAE, 0x940),
+ INTC_VECT(DMAC0, 0x620), INTC_VECT(DMAC0, 0x640),
+ INTC_VECT(DMAC0, 0x660), INTC_VECT(DMAC0, 0x680),
+ INTC_VECT(DMAC0, 0x6a0), INTC_VECT(DMAC0, 0x6c0),
+ INTC_VECT(DMAC0, 0x6e0),
+ INTC_VECT(SCIF0, 0x700), INTC_VECT(SCIF0, 0x720),
+ INTC_VECT(SCIF0, 0x740), INTC_VECT(SCIF0, 0x760),
+ INTC_VECT(SCIF1, 0x780), INTC_VECT(SCIF1, 0x7a0),
+ INTC_VECT(SCIF1, 0x7c0), INTC_VECT(SCIF1, 0x7e0),
+ INTC_VECT(DMAC1, 0x880), INTC_VECT(DMAC1, 0x8a0),
+ INTC_VECT(DMAC1, 0x8c0), INTC_VECT(DMAC1, 0x8e0),
+ INTC_VECT(DMAC1, 0x900), INTC_VECT(DMAC1, 0x920),
+ INTC_VECT(DMAC1, 0x940),
INTC_VECT(HSPI, 0x960),
INTC_VECT(SCIF2, 0x980), INTC_VECT(SCIF3, 0x9a0),
INTC_VECT(SCIF4, 0x9c0), INTC_VECT(SCIF5, 0x9e0),
INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20),
INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60),
- INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0),
- INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0),
- INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20),
+ INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIC5, 0xaa0),
+ INTC_VECT(PCIC5, 0xac0), INTC_VECT(PCIC5, 0xae0),
+ INTC_VECT(PCIC5, 0xb00), INTC_VECT(PCIC5, 0xb20),
INTC_VECT(SIOF, 0xc00),
- INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20),
- INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60),
+ INTC_VECT(MMCIF, 0xd00), INTC_VECT(MMCIF, 0xd20),
+ INTC_VECT(MMCIF, 0xd40), INTC_VECT(MMCIF, 0xd60),
INTC_VECT(DU, 0xd80),
- INTC_VECT(GDTA_GACLI, 0xda0), INTC_VECT(GDTA_GAMCI, 0xdc0),
- INTC_VECT(GDTA_GAERI, 0xde0),
+ INTC_VECT(GDTA, 0xda0), INTC_VECT(GDTA, 0xdc0),
+ INTC_VECT(GDTA, 0xde0),
INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20),
INTC_VECT(TMU5, 0xe40),
INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
INTC_VECT(HAC0, 0xec0), INTC_VECT(HAC1, 0xee0),
- INTC_VECT(FLCTL_FLSTE, 0xf00), INTC_VECT(FLCTL_FLEND, 0xf20),
- INTC_VECT(FLCTL_FLTRQ0, 0xf40), INTC_VECT(FLCTL_FLTRQ1, 0xf60),
- INTC_VECT(GPIOI0, 0xf80), INTC_VECT(GPIOI1, 0xfa0),
- INTC_VECT(GPIOI2, 0xfc0), INTC_VECT(GPIOI3, 0xfe0),
+ INTC_VECT(FLCTL, 0xf00), INTC_VECT(FLCTL, 0xf20),
+ INTC_VECT(FLCTL, 0xf40), INTC_VECT(FLCTL, 0xf60),
+ INTC_VECT(GPIO, 0xf80), INTC_VECT(GPIO, 0xfa0),
+ INTC_VECT(GPIO, 0xfc0), INTC_VECT(GPIO, 0xfe0),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI),
- INTC_GROUP(DMAC0, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2,
- DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE),
- INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
- INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
- INTC_GROUP(DMAC1, DMAC1_DMINT6, DMAC1_DMINT7, DMAC1_DMINT8,
- DMAC1_DMINT9, DMAC1_DMINT10, DMAC1_DMINT11, DMAC1_DMAE),
- INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0),
- INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY),
- INTC_GROUP(GDTA, GDTA_GACLI, GDTA_GAMCI, GDTA_GAERI),
INTC_GROUP(TMU345, TMU3, TMU4, TMU5),
- INTC_GROUP(FLCTL, FLCTL_FLSTE, FLCTL_FLEND,
- FLCTL_FLTRQ0, FLCTL_FLTRQ1),
- INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
--- /dev/null
+/*
+ * SH7786 Setup
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on SH7785 Setup
+ *
+ * Copyright (C) 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <asm/mmzone.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xffea0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 40, 41, 43, 42 },
+ },
+ /*
+ * The rest of these all have multiplexed IRQs
+ */
+ {
+ .mapbase = 0xffeb0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 44, 44, 44, 44 },
+ }, {
+ .mapbase = 0xffec0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 50, 50, 50, 50 },
+ }, {
+ .mapbase = 0xffed0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 51, 51, 51, 51 },
+ }, {
+ .mapbase = 0xffee0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 52, 52, 52, 52 },
+ }, {
+ .mapbase = 0xffef0000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 53, 53, 53, 53 },
+ }, {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct resource usb_ohci_resources[] = {
+ [0] = {
+ .start = 0xffe70400,
+ .end = 0xffe704ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 77,
+ .end = 77,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 usb_ohci_dma_mask = DMA_BIT_MASK(32);
+static struct platform_device usb_ohci_device = {
+ .name = "sh_ohci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &usb_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(usb_ohci_resources),
+ .resource = usb_ohci_resources,
+};
+
+static struct platform_device *sh7786_devices[] __initdata = {
+ &sci_device,
+ &usb_ohci_device,
+};
+
+
+/*
+ * Please call this function if your platform board
+ * use external clock for USB
+ * */
+#define USBCTL0 0xffe70858
+#define CLOCK_MODE_MASK 0xffffff7f
+#define EXT_CLOCK_MODE 0x00000080
+void __init sh7786_usb_use_exclock(void)
+{
+ u32 val = __raw_readl(USBCTL0) & CLOCK_MODE_MASK;
+ __raw_writel(val | EXT_CLOCK_MODE, USBCTL0);
+}
+
+#define USBINITREG1 0xffe70094
+#define USBINITREG2 0xffe7009c
+#define USBINITVAL1 0x00ff0040
+#define USBINITVAL2 0x00000001
+
+#define USBPCTL1 0xffe70804
+#define USBST 0xffe70808
+#define PHY_ENB 0x00000001
+#define PLL_ENB 0x00000002
+#define PHY_RST 0x00000004
+#define ACT_PLL_STATUS 0xc0000000
+static void __init sh7786_usb_setup(void)
+{
+ int i = 1000000;
+
+ /*
+ * USB initial settings
+ *
+ * The following settings are necessary
+ * for using the USB modules.
+ *
+ * see "USB Inital Settings" for detail
+ */
+ __raw_writel(USBINITVAL1, USBINITREG1);
+ __raw_writel(USBINITVAL2, USBINITREG2);
+
+ /*
+ * Set the PHY and PLL enable bit
+ */
+ __raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
+ while (i-- &&
+ ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+ cpu_relax();
+
+ if (i) {
+ /* Set the PHY RST bit */
+ __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+ printk(KERN_INFO "sh7786 usb setup done\n");
+ }
+}
+
+static int __init sh7786_devices_setup(void)
+{
+ sh7786_usb_setup();
+ return platform_add_devices(sh7786_devices,
+ ARRAY_SIZE(sh7786_devices));
+}
+device_initcall(sh7786_devices_setup);
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+
+ IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+ IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+ IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+ IRL0_HHLL, IRL0_HHLH, IRL0_HHHL,
+
+ IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+ IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+ IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+ IRL4_HHLL, IRL4_HHLH, IRL4_HHHL,
+
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ WDT,
+ TMU0_0, TMU0_1, TMU0_2, TMU0_3,
+ TMU1_0, TMU1_1, TMU1_2,
+ DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+ HUDI1, HUDI0,
+ DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+ HPB_0, HPB_1, HPB_2,
+ SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+ SCIF1,
+ TMU2, TMU3,
+ SCIF2, SCIF3, SCIF4, SCIF5,
+ Eth_0, Eth_1,
+ PCIeC0_0, PCIeC0_1, PCIeC0_2,
+ PCIeC1_0, PCIeC1_1, PCIeC1_2,
+ USB,
+ I2C0, I2C1,
+ DU,
+ SSI0, SSI1, SSI2, SSI3,
+ PCIeC2_0, PCIeC2_1, PCIeC2_2,
+ HAC0, HAC1,
+ FLCTL,
+ HSPI,
+ GPIO0, GPIO1,
+ Thermal,
+ INTC0, INTC1, INTC2, INTC3, INTC4, INTC5, INTC6, INTC7,
+
+ /* interrupt groups */
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_VECT(WDT, 0x3e0),
+ INTC_VECT(TMU0_0, 0x400), INTC_VECT(TMU0_1, 0x420),
+ INTC_VECT(TMU0_2, 0x440), INTC_VECT(TMU0_3, 0x460),
+ INTC_VECT(TMU1_0, 0x480), INTC_VECT(TMU1_1, 0x4a0),
+ INTC_VECT(TMU1_2, 0x4c0),
+ INTC_VECT(DMAC0_0, 0x500), INTC_VECT(DMAC0_1, 0x520),
+ INTC_VECT(DMAC0_2, 0x540), INTC_VECT(DMAC0_3, 0x560),
+ INTC_VECT(DMAC0_4, 0x580), INTC_VECT(DMAC0_5, 0x5a0),
+ INTC_VECT(DMAC0_6, 0x5c0),
+ INTC_VECT(HUDI1, 0x5e0), INTC_VECT(HUDI0, 0x600),
+ INTC_VECT(DMAC1_0, 0x620), INTC_VECT(DMAC1_1, 0x640),
+ INTC_VECT(DMAC1_2, 0x660), INTC_VECT(DMAC1_3, 0x680),
+ INTC_VECT(HPB_0, 0x6a0), INTC_VECT(HPB_1, 0x6c0),
+ INTC_VECT(HPB_2, 0x6e0),
+ INTC_VECT(SCIF0_0, 0x700), INTC_VECT(SCIF0_1, 0x720),
+ INTC_VECT(SCIF0_2, 0x740), INTC_VECT(SCIF0_3, 0x760),
+ INTC_VECT(SCIF1, 0x780),
+ INTC_VECT(TMU2, 0x7a0), INTC_VECT(TMU3, 0x7c0),
+ INTC_VECT(SCIF2, 0x840), INTC_VECT(SCIF3, 0x860),
+ INTC_VECT(SCIF4, 0x880), INTC_VECT(SCIF5, 0x8a0),
+ INTC_VECT(Eth_0, 0x8c0), INTC_VECT(Eth_1, 0x8e0),
+ INTC_VECT(PCIeC0_0, 0xae0), INTC_VECT(PCIeC0_1, 0xb00),
+ INTC_VECT(PCIeC0_2, 0xb20),
+ INTC_VECT(PCIeC1_0, 0xb40), INTC_VECT(PCIeC1_1, 0xb60),
+ INTC_VECT(PCIeC1_2, 0xb80),
+ INTC_VECT(USB, 0xba0),
+ INTC_VECT(I2C0, 0xcc0), INTC_VECT(I2C1, 0xce0),
+ INTC_VECT(DU, 0xd00),
+ INTC_VECT(SSI0, 0xd20), INTC_VECT(SSI1, 0xd40),
+ INTC_VECT(SSI2, 0xd60), INTC_VECT(SSI3, 0xd80),
+ INTC_VECT(PCIeC2_0, 0xda0), INTC_VECT(PCIeC2_1, 0xdc0),
+ INTC_VECT(PCIeC2_2, 0xde0),
+ INTC_VECT(HAC0, 0xe00), INTC_VECT(HAC1, 0xe20),
+ INTC_VECT(FLCTL, 0xe40),
+ INTC_VECT(HSPI, 0xe80),
+ INTC_VECT(GPIO0, 0xea0), INTC_VECT(GPIO1, 0xec0),
+ INTC_VECT(Thermal, 0xee0),
+};
+
+/* FIXME: Main CPU support only now */
+#if 1 /* Main CPU */
+#define CnINTMSK0 0xfe410030
+#define CnINTMSK1 0xfe410040
+#define CnINTMSKCLR0 0xfe410050
+#define CnINTMSKCLR1 0xfe410060
+#define CnINT2MSKR0 0xfe410a20
+#define CnINT2MSKR1 0xfe410a24
+#define CnINT2MSKR2 0xfe410a28
+#define CnINT2MSKR3 0xfe410a2c
+#define CnINT2MSKCR0 0xfe410a30
+#define CnINT2MSKCR1 0xfe410a34
+#define CnINT2MSKCR2 0xfe410a38
+#define CnINT2MSKCR3 0xfe410a3c
+#else /* Sub CPU */
+#define CnINTMSK0 0xfe410034
+#define CnINTMSK1 0xfe410044
+#define CnINTMSKCLR0 0xfe410054
+#define CnINTMSKCLR1 0xfe410064
+#define CnINT2MSKR0 0xfe410b20
+#define CnINT2MSKR1 0xfe410b24
+#define CnINT2MSKR2 0xfe410b28
+#define CnINT2MSKR3 0xfe410b2c
+#define CnINT2MSKCR0 0xfe410b30
+#define CnINT2MSKCR1 0xfe410b34
+#define CnINT2MSKCR2 0xfe410b38
+#define CnINT2MSKCR3 0xfe410b3c
+#endif
+
+#define INTMSK2 0xfe410068
+#define INTMSKCLR2 0xfe41006c
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+ { CnINTMSK0, CnINTMSKCLR0, 32,
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { INTMSK2, INTMSKCLR2, 32,
+ { IRL0_LLLL, IRL0_LLLH, IRL0_LLHL, IRL0_LLHH,
+ IRL0_LHLL, IRL0_LHLH, IRL0_LHHL, IRL0_LHHH,
+ IRL0_HLLL, IRL0_HLLH, IRL0_HLHL, IRL0_HLHH,
+ IRL0_HHLL, IRL0_HHLH, IRL0_HHHL, 0,
+ IRL4_LLLL, IRL4_LLLH, IRL4_LLHL, IRL4_LLHH,
+ IRL4_LHLL, IRL4_LHLH, IRL4_LHHL, IRL4_LHHH,
+ IRL4_HLLL, IRL4_HLLH, IRL4_HLHL, IRL4_HLHH,
+ IRL4_HHLL, IRL4_HHLH, IRL4_HHHL, 0, } },
+ { CnINT2MSKR0, CnINT2MSKCR0 , 32,
+ { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, WDT } },
+ { CnINT2MSKR1, CnINT2MSKCR1, 32,
+ { TMU0_0, TMU0_1, TMU0_2, TMU0_3, TMU1_0, TMU1_1, TMU1_2, 0,
+ DMAC0_0, DMAC0_1, DMAC0_2, DMAC0_3, DMAC0_4, DMAC0_5, DMAC0_6,
+ HUDI1, HUDI0,
+ DMAC1_0, DMAC1_1, DMAC1_2, DMAC1_3,
+ HPB_0, HPB_1, HPB_2,
+ SCIF0_0, SCIF0_1, SCIF0_2, SCIF0_3,
+ SCIF1,
+ TMU2, TMU3, 0, } },
+ { CnINT2MSKR2, CnINT2MSKCR2, 32,
+ { 0, 0, SCIF2, SCIF3, SCIF4, SCIF5,
+ Eth_0, Eth_1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ PCIeC0_0, PCIeC0_1, PCIeC0_2,
+ PCIeC1_0, PCIeC1_1, PCIeC1_2,
+ USB, 0, 0 } },
+ { CnINT2MSKR3, CnINT2MSKCR3, 32,
+ { 0, 0, 0, 0, 0, 0,
+ I2C0, I2C1,
+ DU, SSI0, SSI1, SSI2, SSI3,
+ PCIeC2_0, PCIeC2_1, PCIeC2_2,
+ HAC0, HAC1,
+ FLCTL, 0,
+ HSPI, GPIO0, GPIO1, Thermal,
+ 0, 0, 0, 0, 0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xfe410010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xfe410800, 0, 32, 8, /* INT2PRI0 */ { 0, 0, 0, WDT } },
+ { 0xfe410804, 0, 32, 8, /* INT2PRI1 */ { TMU0_0, TMU0_1,
+ TMU0_2, TMU0_3 } },
+ { 0xfe410808, 0, 32, 8, /* INT2PRI2 */ { TMU1_0, TMU1_1,
+ TMU1_2, 0 } },
+ { 0xfe41080c, 0, 32, 8, /* INT2PRI3 */ { DMAC0_0, DMAC0_1,
+ DMAC0_2, DMAC0_3 } },
+ { 0xfe410810, 0, 32, 8, /* INT2PRI4 */ { DMAC0_4, DMAC0_5,
+ DMAC0_6, HUDI1 } },
+ { 0xfe410814, 0, 32, 8, /* INT2PRI5 */ { HUDI0, DMAC1_0,
+ DMAC1_1, DMAC1_2 } },
+ { 0xfe410818, 0, 32, 8, /* INT2PRI6 */ { DMAC1_3, HPB_0,
+ HPB_1, HPB_2 } },
+ { 0xfe41081c, 0, 32, 8, /* INT2PRI7 */ { SCIF0_0, SCIF0_1,
+ SCIF0_2, SCIF0_3 } },
+ { 0xfe410820, 0, 32, 8, /* INT2PRI8 */ { SCIF1, TMU2, TMU3, 0 } },
+ { 0xfe410824, 0, 32, 8, /* INT2PRI9 */ { 0, 0, SCIF2, SCIF3 } },
+ { 0xfe410828, 0, 32, 8, /* INT2PRI10 */ { SCIF4, SCIF5,
+ Eth_0, Eth_1 } },
+ { 0xfe41082c, 0, 32, 8, /* INT2PRI11 */ { 0, 0, 0, 0 } },
+ { 0xfe410830, 0, 32, 8, /* INT2PRI12 */ { 0, 0, 0, 0 } },
+ { 0xfe410834, 0, 32, 8, /* INT2PRI13 */ { 0, 0, 0, 0 } },
+ { 0xfe410838, 0, 32, 8, /* INT2PRI14 */ { 0, 0, 0, PCIeC0_0 } },
+ { 0xfe41083c, 0, 32, 8, /* INT2PRI15 */ { PCIeC0_1, PCIeC0_2,
+ PCIeC1_0, PCIeC1_1 } },
+ { 0xfe410840, 0, 32, 8, /* INT2PRI16 */ { PCIeC1_2, USB, 0, 0 } },
+ { 0xfe410844, 0, 32, 8, /* INT2PRI17 */ { 0, 0, 0, 0 } },
+ { 0xfe410848, 0, 32, 8, /* INT2PRI18 */ { 0, 0, I2C0, I2C1 } },
+ { 0xfe41084c, 0, 32, 8, /* INT2PRI19 */ { DU, SSI0, SSI1, SSI2 } },
+ { 0xfe410850, 0, 32, 8, /* INT2PRI20 */ { SSI3, PCIeC2_0,
+ PCIeC2_1, PCIeC2_2 } },
+ { 0xfe410854, 0, 32, 8, /* INT2PRI21 */ { HAC0, HAC1, FLCTL, 0 } },
+ { 0xfe410858, 0, 32, 8, /* INT2PRI22 */ { HSPI, GPIO0,
+ GPIO1, Thermal } },
+ { 0xfe41085c, 0, 32, 8, /* INT2PRI23 */ { 0, 0, 0, 0 } },
+ { 0xfe410860, 0, 32, 8, /* INT2PRI24 */ { 0, 0, 0, 0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7786", vectors, NULL,
+ mask_registers, prio_registers, NULL);
+
+/* Support for external interrupt pins in IRQ mode */
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+ INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240),
+ INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0),
+};
+
+static struct intc_vect vectors_irq4567[] __initdata = {
+ INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340),
+ INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0),
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+ { 0xfe41001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3,
+ IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+ { 0xfe410024, 0, 32, /* INTREQ */
+ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7786-irq0123",
+ vectors_irq0123, NULL, mask_registers,
+ prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7786-irq4567",
+ vectors_irq4567, NULL, mask_registers,
+ prio_registers, sense_registers, ack_registers);
+
+/* External interrupt pins in IRL mode */
+
+static struct intc_vect vectors_irl0123[] __initdata = {
+ INTC_VECT(IRL0_LLLL, 0x200), INTC_VECT(IRL0_LLLH, 0x220),
+ INTC_VECT(IRL0_LLHL, 0x240), INTC_VECT(IRL0_LLHH, 0x260),
+ INTC_VECT(IRL0_LHLL, 0x280), INTC_VECT(IRL0_LHLH, 0x2a0),
+ INTC_VECT(IRL0_LHHL, 0x2c0), INTC_VECT(IRL0_LHHH, 0x2e0),
+ INTC_VECT(IRL0_HLLL, 0x300), INTC_VECT(IRL0_HLLH, 0x320),
+ INTC_VECT(IRL0_HLHL, 0x340), INTC_VECT(IRL0_HLHH, 0x360),
+ INTC_VECT(IRL0_HHLL, 0x380), INTC_VECT(IRL0_HHLH, 0x3a0),
+ INTC_VECT(IRL0_HHHL, 0x3c0),
+};
+
+static struct intc_vect vectors_irl4567[] __initdata = {
+ INTC_VECT(IRL4_LLLL, 0x900), INTC_VECT(IRL4_LLLH, 0x920),
+ INTC_VECT(IRL4_LLHL, 0x940), INTC_VECT(IRL4_LLHH, 0x960),
+ INTC_VECT(IRL4_LHLL, 0x980), INTC_VECT(IRL4_LHLH, 0x9a0),
+ INTC_VECT(IRL4_LHHL, 0x9c0), INTC_VECT(IRL4_LHHH, 0x9e0),
+ INTC_VECT(IRL4_HLLL, 0xa00), INTC_VECT(IRL4_HLLH, 0xa20),
+ INTC_VECT(IRL4_HLHL, 0xa40), INTC_VECT(IRL4_HLHH, 0xa60),
+ INTC_VECT(IRL4_HHLL, 0xa80), INTC_VECT(IRL4_HHLH, 0xaa0),
+ INTC_VECT(IRL4_HHHL, 0xac0),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7786-irl0123", vectors_irl0123,
+ NULL, mask_registers, NULL, NULL);
+
+static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7786-irl4567", vectors_irl4567,
+ NULL, mask_registers, NULL, NULL);
+
+#define INTC_ICR0 0xfe410000
+#define INTC_INTMSK0 CnINTMSK0
+#define INTC_INTMSK1 CnINTMSK1
+#define INTC_INTMSK2 INTMSK2
+#define INTC_INTMSKCLR1 CnINTMSKCLR1
+#define INTC_INTMSKCLR2 INTMSKCLR2
+
+void __init plat_irq_setup(void)
+{
+ /* disable IRQ3-0 + IRQ7-4 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ register_intc_controller(&intc_desc);
+}
+
+void __init plat_irq_setup_pins(int mode)
+{
+ switch (mode) {
+ case IRQ_MODE_IRQ7654:
+ /* select IRQ mode for IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
+ register_intc_controller(&intc_desc_irq4567);
+ break;
+ case IRQ_MODE_IRQ3210:
+ /* select IRQ mode for IRL3-0 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
+ register_intc_controller(&intc_desc_irq0123);
+ break;
+ case IRQ_MODE_IRL7654:
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_desc_irl4567);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_desc_irl0123);
+ break;
+ default:
+ BUG();
+ }
+}
+
+void __init plat_mem_setup(void)
+{
+}
--- /dev/null
+#
+# Makefile for the Linux/SuperH SH-Mobile backends.
+#
+
+# Power Management & Sleep mode
+obj-$(CONFIG_PM) += pm.o sleep.o
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4a/pm-sh_mobile.c
+ *
+ * Power management support code for SuperH Mobile
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/uaccess.h>
+
+/*
+ * Sleep modes available on SuperH Mobile:
+ *
+ * Sleep mode is just plain "sleep" instruction
+ * Sleep Self-Refresh mode is above plus RAM put in Self-Refresh
+ * Standby Self-Refresh mode is above plus stopped clocks
+ */
+#define SUSP_MODE_SLEEP (SUSP_SH_SLEEP)
+#define SUSP_MODE_SLEEP_SF (SUSP_SH_SLEEP | SUSP_SH_SF)
+#define SUSP_MODE_STANDBY_SF (SUSP_SH_STANDBY | SUSP_SH_SF)
+
+/*
+ * The following modes are not there yet:
+ *
+ * R-standby mode is unsupported, but will be added in the future
+ * U-standby mode is low priority since it needs bootloader hacks
+ *
+ * All modes should be tied in with cpuidle. But before that can
+ * happen we need to keep track of enabled hardware blocks so we
+ * can avoid entering sleep modes that stop clocks to hardware
+ * blocks that are in use even though the cpu core is idle.
+ */
+
+extern const unsigned char sh_mobile_standby[];
+extern const unsigned int sh_mobile_standby_size;
+
+static void sh_mobile_call_standby(unsigned long mode)
+{
+ extern void *vbr_base;
+ void *onchip_mem = (void *)0xe5200000; /* ILRAM */
+ void (*standby_onchip_mem)(unsigned long) = onchip_mem;
+
+ /* Note: Wake up from sleep may generate exceptions!
+ * Setup VBR to point to on-chip ram if self-refresh is
+ * going to be used.
+ */
+ if (mode & SUSP_SH_SF)
+ asm volatile("ldc %0, vbr" : : "r" (onchip_mem) : "memory");
+
+ /* Copy the assembly snippet to the otherwise ununsed ILRAM */
+ memcpy(onchip_mem, sh_mobile_standby, sh_mobile_standby_size);
+ wmb();
+ ctrl_barrier();
+
+ /* Let assembly snippet in on-chip memory handle the rest */
+ standby_onchip_mem(mode);
+
+ /* Put VBR back in System RAM again */
+ if (mode & SUSP_SH_SF)
+ asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+}
+
+static int sh_pm_enter(suspend_state_t state)
+{
+ local_irq_disable();
+ set_bl_bit();
+ sh_mobile_call_standby(SUSP_MODE_STANDBY_SF);
+ local_irq_disable();
+ clear_bl_bit();
+ return 0;
+}
+
+static struct platform_suspend_ops sh_pm_ops = {
+ .enter = sh_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+static int __init sh_pm_init(void)
+{
+ suspend_set_ops(&sh_pm_ops);
+ return 0;
+}
+
+late_initcall(sh_pm_init);
--- /dev/null
+/*
+ * arch/sh/kernel/cpu/sh4a/sleep-sh_mobile.S
+ *
+ * Sleep mode and Standby modes support for SuperH Mobile
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+
+/* manage self-refresh and enter standby mode.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+
+ .balign 4096,0,4096
+ENTRY(sh_mobile_standby)
+ mov r4, r0
+
+ tst #SUSP_SH_SF, r0
+ bt skip_set_sf
+
+ /* SDRAM: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+skip_set_sf:
+ tst #SUSP_SH_SLEEP, r0
+ bt test_standby
+
+ /* set mode to "sleep mode" */
+ bra do_sleep
+ mov #0x00, r1
+
+test_standby:
+ tst #SUSP_SH_STANDBY, r0
+ bt test_rstandby
+
+ /* set mode to "software standby mode" */
+ bra do_sleep
+ mov #0x80, r1
+
+test_rstandby:
+ tst #SUSP_SH_RSTANDBY, r0
+ bt test_ustandby
+
+ /* set mode to "r-standby mode" */
+ bra do_sleep
+ mov #0x20, r1
+
+test_ustandby:
+ tst #SUSP_SH_USTANDBY, r0
+ bt done_sleep
+
+ /* set mode to "u-standby mode" */
+ mov #0x10, r1
+
+ /* fall-through */
+
+do_sleep:
+ /* setup and enter selected standby mode */
+ mov.l 5f, r4
+ mov.l r1, @r4
+ sleep
+
+done_sleep:
+ /* reset standby mode to sleep mode */
+ mov.l 5f, r4
+ mov #0x00, r1
+ mov.l r1, @r4
+
+ tst #SUSP_SH_SF, r0
+ bt skip_restore_sf
+
+ /* SDRAM: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r2
+ mov.l 4f, r3
+ and r3, r2
+ mov.l r2, @r4
+ mov.l 6f, r4
+ mov.l 7f, r1
+ mov.l 8f, r2
+ mov.l @r4, r3
+ mov #-1, r4
+ add r4, r3
+ or r2, r3
+ mov.l r3, @r1
+skip_restore_sf:
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+4: .long 0xfffffbff
+5: .long 0xa4150020 /* STBCR */
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+
+/* interrupt vector @ 0x600 */
+ .balign 0x400,0,0x400
+ .long 0xdeadbeef
+ .balign 0x200,0,0x200
+ /* sh7722 will end up here in sleep mode */
+ rte
+ nop
+sh_mobile_standby_end:
+
+ENTRY(sh_mobile_standby_size)
+ .long sh_mobile_standby_end - sh_mobile_standby
#include <linux/bitops.h>
#include <linux/gpio.h>
-static struct pinmux_info *registered_gpio;
+static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
+{
+ if (enum_id < r->begin)
+ return 0;
-static struct pinmux_info *gpio_controller(unsigned gpio)
+ if (enum_id > r->end)
+ return 0;
+
+ return 1;
+}
+
+static unsigned long gpio_read_raw_reg(unsigned long reg,
+ unsigned long reg_width)
{
- if (!registered_gpio)
- return NULL;
+ switch (reg_width) {
+ case 8:
+ return ctrl_inb(reg);
+ case 16:
+ return ctrl_inw(reg);
+ case 32:
+ return ctrl_inl(reg);
+ }
- if (gpio < registered_gpio->first_gpio)
- return NULL;
+ BUG();
+ return 0;
+}
- if (gpio > registered_gpio->last_gpio)
- return NULL;
+static void gpio_write_raw_reg(unsigned long reg,
+ unsigned long reg_width,
+ unsigned long data)
+{
+ switch (reg_width) {
+ case 8:
+ ctrl_outb(data, reg);
+ return;
+ case 16:
+ ctrl_outw(data, reg);
+ return;
+ case 32:
+ ctrl_outl(data, reg);
+ return;
+ }
- return registered_gpio;
+ BUG();
}
-static int enum_in_range(pinmux_enum_t enum_id, struct pinmux_range *r)
+static void gpio_write_bit(struct pinmux_data_reg *dr,
+ unsigned long in_pos, unsigned long value)
{
- if (enum_id < r->begin)
- return 0;
+ unsigned long pos;
- if (enum_id > r->end)
- return 0;
+ pos = dr->reg_width - (in_pos + 1);
- return 1;
+#ifdef DEBUG
+ pr_info("write_bit addr = %lx, value = %ld, pos = %ld, "
+ "r_width = %ld\n",
+ dr->reg, !!value, pos, dr->reg_width);
+#endif
+
+ if (value)
+ set_bit(pos, &dr->reg_shadow);
+ else
+ clear_bit(pos, &dr->reg_shadow);
+
+ gpio_write_raw_reg(dr->reg, dr->reg_width, dr->reg_shadow);
}
-static int read_write_reg(unsigned long reg, unsigned long reg_width,
- unsigned long field_width, unsigned long in_pos,
- unsigned long value, int do_write)
+static int gpio_read_reg(unsigned long reg, unsigned long reg_width,
+ unsigned long field_width, unsigned long in_pos)
{
unsigned long data, mask, pos;
pos = reg_width - ((in_pos + 1) * field_width);
#ifdef DEBUG
- pr_info("%s, addr = %lx, value = %ld, pos = %ld, "
+ pr_info("read_reg: addr = %lx, pos = %ld, "
"r_width = %ld, f_width = %ld\n",
- do_write ? "write" : "read", reg, value, pos,
- reg_width, field_width);
+ reg, pos, reg_width, field_width);
#endif
- switch (reg_width) {
- case 8:
- data = ctrl_inb(reg);
- break;
- case 16:
- data = ctrl_inw(reg);
- break;
- case 32:
- data = ctrl_inl(reg);
- break;
- }
+ data = gpio_read_raw_reg(reg, reg_width);
+ return (data >> pos) & mask;
+}
- if (!do_write)
- return (data >> pos) & mask;
+static void gpio_write_reg(unsigned long reg, unsigned long reg_width,
+ unsigned long field_width, unsigned long in_pos,
+ unsigned long value)
+{
+ unsigned long mask, pos;
- data &= ~(mask << pos);
- data |= value << pos;
+ mask = (1 << field_width) - 1;
+ pos = reg_width - ((in_pos + 1) * field_width);
+
+#ifdef DEBUG
+ pr_info("write_reg addr = %lx, value = %ld, pos = %ld, "
+ "r_width = %ld, f_width = %ld\n",
+ reg, value, pos, reg_width, field_width);
+#endif
+
+ mask = ~(mask << pos);
+ value = value << pos;
switch (reg_width) {
case 8:
- ctrl_outb(data, reg);
+ ctrl_outb((ctrl_inb(reg) & mask) | value, reg);
break;
case 16:
- ctrl_outw(data, reg);
+ ctrl_outw((ctrl_inw(reg) & mask) | value, reg);
break;
case 32:
- ctrl_outl(data, reg);
+ ctrl_outl((ctrl_inl(reg) & mask) | value, reg);
break;
}
- return 0;
}
-static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
- struct pinmux_data_reg **drp, int *bitp)
+static int setup_data_reg(struct pinmux_info *gpioc, unsigned gpio)
{
- pinmux_enum_t enum_id = gpioc->gpios[gpio].enum_id;
+ struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
struct pinmux_data_reg *data_reg;
int k, n;
- if (!enum_in_range(enum_id, &gpioc->data))
+ if (!enum_in_range(gpiop->enum_id, &gpioc->data))
return -1;
k = 0;
break;
for (n = 0; n < data_reg->reg_width; n++) {
- if (data_reg->enum_ids[n] == enum_id) {
- *drp = data_reg;
- *bitp = n;
+ if (data_reg->enum_ids[n] == gpiop->enum_id) {
+ gpiop->flags &= ~PINMUX_FLAG_DREG;
+ gpiop->flags |= (k << PINMUX_FLAG_DREG_SHIFT);
+ gpiop->flags &= ~PINMUX_FLAG_DBIT;
+ gpiop->flags |= (n << PINMUX_FLAG_DBIT_SHIFT);
return 0;
-
}
}
k++;
}
+ BUG();
+
return -1;
}
+static void setup_data_regs(struct pinmux_info *gpioc)
+{
+ struct pinmux_data_reg *drp;
+ int k;
+
+ for (k = gpioc->first_gpio; k <= gpioc->last_gpio; k++)
+ setup_data_reg(gpioc, k);
+
+ k = 0;
+ while (1) {
+ drp = gpioc->data_regs + k;
+
+ if (!drp->reg_width)
+ break;
+
+ drp->reg_shadow = gpio_read_raw_reg(drp->reg, drp->reg_width);
+ k++;
+ }
+}
+
+static int get_data_reg(struct pinmux_info *gpioc, unsigned gpio,
+ struct pinmux_data_reg **drp, int *bitp)
+{
+ struct pinmux_gpio *gpiop = &gpioc->gpios[gpio];
+ int k, n;
+
+ if (!enum_in_range(gpiop->enum_id, &gpioc->data))
+ return -1;
+
+ k = (gpiop->flags & PINMUX_FLAG_DREG) >> PINMUX_FLAG_DREG_SHIFT;
+ n = (gpiop->flags & PINMUX_FLAG_DBIT) >> PINMUX_FLAG_DBIT_SHIFT;
+ *drp = gpioc->data_regs + k;
+ *bitp = n;
+ return 0;
+}
+
static int get_config_reg(struct pinmux_info *gpioc, pinmux_enum_t enum_id,
struct pinmux_cfg_reg **crp, int *indexp,
unsigned long **cntp)
return -1;
}
-static int write_config_reg(struct pinmux_info *gpioc,
- struct pinmux_cfg_reg *crp,
- int index)
+static void write_config_reg(struct pinmux_info *gpioc,
+ struct pinmux_cfg_reg *crp,
+ int index)
{
unsigned long ncomb, pos, value;
pos = index / ncomb;
value = index % ncomb;
- return read_write_reg(crp->reg, crp->reg_width,
- crp->field_width, pos, value, 1);
+ gpio_write_reg(crp->reg, crp->reg_width, crp->field_width, pos, value);
}
static int check_config_reg(struct pinmux_info *gpioc,
pos = index / ncomb;
value = index % ncomb;
- if (read_write_reg(crp->reg, crp->reg_width,
- crp->field_width, pos, 0, 0) == value)
+ if (gpio_read_reg(crp->reg, crp->reg_width,
+ crp->field_width, pos) == value)
return 0;
return -1;
enum { GPIO_CFG_DRYRUN, GPIO_CFG_REQ, GPIO_CFG_FREE };
-int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
- int pinmux_type, int cfg_mode)
+static int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio,
+ int pinmux_type, int cfg_mode)
{
struct pinmux_cfg_reg *cr = NULL;
pinmux_enum_t enum_id;
break;
case GPIO_CFG_REQ:
- if (write_config_reg(gpioc, cr, index) != 0)
- goto out_err;
+ write_config_reg(gpioc, cr, index);
*cntp = *cntp + 1;
break;
static DEFINE_SPINLOCK(gpio_lock);
-int __gpio_request(unsigned gpio)
+static struct pinmux_info *chip_to_pinmux(struct gpio_chip *chip)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
+ return container_of(chip, struct pinmux_info, chip);
+}
+
+static int sh_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
struct pinmux_data_reg *dummy;
unsigned long flags;
int i, ret, pinmux_type;
spin_lock_irqsave(&gpio_lock, flags);
- if ((gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
+ if ((gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE) != PINMUX_TYPE_NONE)
goto err_unlock;
/* setup pin function here if no data is associated with pin */
- if (get_data_reg(gpioc, gpio, &dummy, &i) != 0)
+ if (get_data_reg(gpioc, offset, &dummy, &i) != 0)
pinmux_type = PINMUX_TYPE_FUNCTION;
else
pinmux_type = PINMUX_TYPE_GPIO;
if (pinmux_type == PINMUX_TYPE_FUNCTION) {
- if (pinmux_config_gpio(gpioc, gpio,
+ if (pinmux_config_gpio(gpioc, offset,
pinmux_type,
GPIO_CFG_DRYRUN) != 0)
goto err_unlock;
- if (pinmux_config_gpio(gpioc, gpio,
+ if (pinmux_config_gpio(gpioc, offset,
pinmux_type,
GPIO_CFG_REQ) != 0)
BUG();
}
- gpioc->gpios[gpio].flags = pinmux_type;
+ gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
+ gpioc->gpios[offset].flags |= pinmux_type;
ret = 0;
err_unlock:
err_out:
return ret;
}
-EXPORT_SYMBOL(__gpio_request);
-void gpio_free(unsigned gpio)
+static void sh_gpio_free(struct gpio_chip *chip, unsigned offset)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
unsigned long flags;
int pinmux_type;
spin_lock_irqsave(&gpio_lock, flags);
- pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
- pinmux_config_gpio(gpioc, gpio, pinmux_type, GPIO_CFG_FREE);
- gpioc->gpios[gpio].flags = PINMUX_TYPE_NONE;
+ pinmux_type = gpioc->gpios[offset].flags & PINMUX_FLAG_TYPE;
+ pinmux_config_gpio(gpioc, offset, pinmux_type, GPIO_CFG_FREE);
+ gpioc->gpios[offset].flags &= ~PINMUX_FLAG_TYPE;
+ gpioc->gpios[offset].flags |= PINMUX_TYPE_NONE;
spin_unlock_irqrestore(&gpio_lock, flags);
}
-EXPORT_SYMBOL(gpio_free);
static int pinmux_direction(struct pinmux_info *gpioc,
unsigned gpio, int new_pinmux_type)
{
- int ret, pinmux_type;
+ int pinmux_type;
+ int ret = -EINVAL;
+
+ if (!gpioc)
+ goto err_out;
- ret = -EINVAL;
pinmux_type = gpioc->gpios[gpio].flags & PINMUX_FLAG_TYPE;
switch (pinmux_type) {
GPIO_CFG_REQ) != 0)
BUG();
- gpioc->gpios[gpio].flags = new_pinmux_type;
+ gpioc->gpios[gpio].flags &= ~PINMUX_FLAG_TYPE;
+ gpioc->gpios[gpio].flags |= new_pinmux_type;
ret = 0;
err_out:
return ret;
}
-int gpio_direction_input(unsigned gpio)
+static int sh_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
unsigned long flags;
- int ret = -EINVAL;
-
- if (!gpioc)
- goto err_out;
+ int ret;
spin_lock_irqsave(&gpio_lock, flags);
- ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_INPUT);
+ ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_INPUT);
spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
+
return ret;
}
-EXPORT_SYMBOL(gpio_direction_input);
-static int __gpio_get_set_value(struct pinmux_info *gpioc,
- unsigned gpio, int value,
- int do_write)
+static void sh_gpio_set_value(struct pinmux_info *gpioc,
+ unsigned gpio, int value)
{
struct pinmux_data_reg *dr = NULL;
int bit = 0;
- if (get_data_reg(gpioc, gpio, &dr, &bit) != 0)
+ if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0)
BUG();
else
- value = read_write_reg(dr->reg, dr->reg_width,
- 1, bit, !!value, do_write);
-
- return value;
+ gpio_write_bit(dr, bit, value);
}
-int gpio_direction_output(unsigned gpio, int value)
+static int sh_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
+ struct pinmux_info *gpioc = chip_to_pinmux(chip);
unsigned long flags;
- int ret = -EINVAL;
-
- if (!gpioc)
- goto err_out;
+ int ret;
+ sh_gpio_set_value(gpioc, offset, value);
spin_lock_irqsave(&gpio_lock, flags);
- __gpio_get_set_value(gpioc, gpio, value, 1);
- ret = pinmux_direction(gpioc, gpio, PINMUX_TYPE_OUTPUT);
+ ret = pinmux_direction(gpioc, offset, PINMUX_TYPE_OUTPUT);
spin_unlock_irqrestore(&gpio_lock, flags);
- err_out:
+
return ret;
}
-EXPORT_SYMBOL(gpio_direction_output);
-int gpio_get_value(unsigned gpio)
+static int sh_gpio_get_value(struct pinmux_info *gpioc, unsigned gpio)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
- unsigned long flags;
- int value = 0;
+ struct pinmux_data_reg *dr = NULL;
+ int bit = 0;
- if (!gpioc)
+ if (!gpioc || get_data_reg(gpioc, gpio, &dr, &bit) != 0) {
BUG();
- else {
- spin_lock_irqsave(&gpio_lock, flags);
- value = __gpio_get_set_value(gpioc, gpio, 0, 0);
- spin_unlock_irqrestore(&gpio_lock, flags);
+ return 0;
}
- return value;
+ return gpio_read_reg(dr->reg, dr->reg_width, 1, bit);
}
-EXPORT_SYMBOL(gpio_get_value);
-void gpio_set_value(unsigned gpio, int value)
+static int sh_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- struct pinmux_info *gpioc = gpio_controller(gpio);
- unsigned long flags;
+ return sh_gpio_get_value(chip_to_pinmux(chip), offset);
+}
- if (!gpioc)
- BUG();
- else {
- spin_lock_irqsave(&gpio_lock, flags);
- __gpio_get_set_value(gpioc, gpio, value, 1);
- spin_unlock_irqrestore(&gpio_lock, flags);
- }
+static void sh_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ sh_gpio_set_value(chip_to_pinmux(chip), offset, value);
}
-EXPORT_SYMBOL(gpio_set_value);
int register_pinmux(struct pinmux_info *pip)
{
- registered_gpio = pip;
- pr_info("pinmux: %s handling gpio %d -> %d\n",
+ struct gpio_chip *chip = &pip->chip;
+
+ pr_info("sh pinmux: %s handling gpio %d -> %d\n",
pip->name, pip->first_gpio, pip->last_gpio);
- return 0;
+ setup_data_regs(pip);
+
+ chip->request = sh_gpio_request;
+ chip->free = sh_gpio_free;
+ chip->direction_input = sh_gpio_direction_input;
+ chip->get = sh_gpio_get;
+ chip->direction_output = sh_gpio_direction_output;
+ chip->set = sh_gpio_set;
+
+ WARN_ON(pip->first_gpio != 0); /* needs testing */
+
+ chip->label = pip->name;
+ chip->owner = THIS_MODULE;
+ chip->base = pip->first_gpio;
+ chip->ngpio = (pip->last_gpio - pip->first_gpio) + 1;
+
+ return gpiochip_add(chip);
}
}
#endif
- irq = irq_demux(evt2irq(irq));
+ irq = irq_demux(intc_evt2irq(irq));
#ifdef CONFIG_IRQSTACKS
curctx = (union irq_ctx *)current_thread_info();
#include <linux/delay.h>
#include <linux/reboot.h>
#include <linux/numa.h>
+#include <linux/ftrace.h>
+#include <linux/suspend.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/cacheflush.h>
-typedef NORET_TYPE void (*relocate_new_kernel_t)(
- unsigned long indirection_page,
- unsigned long reboot_code_buffer,
- unsigned long start_address,
- unsigned long vbr_reg) ATTRIB_NORET;
+typedef void (*relocate_new_kernel_t)(unsigned long indirection_page,
+ unsigned long reboot_code_buffer,
+ unsigned long start_address);
extern const unsigned char relocate_new_kernel[];
extern const unsigned int relocate_new_kernel_size;
extern void *gdb_vbr_vector;
+extern void *vbr_base;
void machine_shutdown(void)
{
*/
int machine_kexec_prepare(struct kimage *image)
{
+ /* older versions of kexec-tools are passing
+ * the zImage entry point as a virtual address.
+ */
+ if (image->start != PHYSADDR(image->start))
+ return -EINVAL; /* upgrade your kexec-tools */
+
return 0;
}
*/
void machine_kexec(struct kimage *image)
{
-
unsigned long page_list;
unsigned long reboot_code_buffer;
- unsigned long vbr_reg;
relocate_new_kernel_t rnk;
+ unsigned long entry;
+ unsigned long *ptr;
+ int save_ftrace_enabled;
+
+ /*
+ * Nicked from the mips version of machine_kexec():
+ * The generic kexec code builds a page list with physical
+ * addresses. Use phys_to_virt() to convert them to virtual.
+ */
+ for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+ ptr = (entry & IND_INDIRECTION) ?
+ phys_to_virt(entry & PAGE_MASK) : ptr + 1) {
+ if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+ *ptr & IND_DESTINATION)
+ *ptr = (unsigned long) phys_to_virt(*ptr);
+ }
-#if defined(CONFIG_SH_STANDARD_BIOS)
- vbr_reg = ((unsigned long )gdb_vbr_vector) - 0x100;
-#else
- vbr_reg = 0x80000000; // dummy
+#ifdef CONFIG_KEXEC_JUMP
+ if (image->preserve_context)
+ save_processor_state();
#endif
+
+ save_ftrace_enabled = __ftrace_enabled_save();
+
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
memcpy((void *)reboot_code_buffer, relocate_new_kernel,
relocate_new_kernel_size);
- kexec_info(image);
+ kexec_info(image);
flush_cache_all();
+#if defined(CONFIG_SH_STANDARD_BIOS)
+ asm volatile("ldc %0, vbr" :
+ : "r" (((unsigned long) gdb_vbr_vector) - 0x100)
+ : "memory");
+#endif
+
/* now call it */
rnk = (relocate_new_kernel_t) reboot_code_buffer;
- (*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
+ (*rnk)(page_list, reboot_code_buffer,
+ (unsigned long)phys_to_virt(image->start));
+
+#ifdef CONFIG_KEXEC_JUMP
+ asm volatile("ldc %0, vbr" : : "r" (&vbr_base) : "memory");
+
+ if (image->preserve_context)
+ restore_processor_state();
+
+ /* Convert page list back to physical addresses, what a mess. */
+ for (ptr = &image->head; (entry = *ptr) && !(entry & IND_DONE);
+ ptr = (*ptr & IND_INDIRECTION) ?
+ phys_to_virt(*ptr & PAGE_MASK) : ptr + 1) {
+ if (*ptr & IND_SOURCE || *ptr & IND_INDIRECTION ||
+ *ptr & IND_DESTINATION)
+ *ptr = virt_to_phys(*ptr);
+ }
+#endif
+
+ __ftrace_enabled_restore(save_ftrace_enabled);
}
void arch_crash_save_vmcoreinfo(void)
*
* LANDISK/sh4 is supported. Maybe, SH archtecture works well.
*
+ * 2009-03-18 Magnus Damm - Added Kexec Jump support
+ *
* This source code is licensed under the GNU General Public License,
* Version 2. See the file COPYING for more details.
*/
/* r4 = indirection_page */
/* r5 = reboot_code_buffer */
/* r6 = start_address */
- /* r7 = vbr_reg */
- mov.l 10f,r8 /* PAGE_SIZE */
- mov.l 11f,r9 /* P2SEG */
+ mov.l 10f, r0 /* PAGE_SIZE */
+ add r5, r0 /* setup new stack at end of control page */
+
+ /* save r15->r8 to new stack */
+ mov.l r15, @-r0
+ mov r0, r15
+ mov.l r14, @-r15
+ mov.l r13, @-r15
+ mov.l r12, @-r15
+ mov.l r11, @-r15
+ mov.l r10, @-r15
+ mov.l r9, @-r15
+ mov.l r8, @-r15
+
+ /* save other random registers */
+ sts.l macl, @-r15
+ sts.l mach, @-r15
+ stc.l gbr, @-r15
+ stc.l ssr, @-r15
+ stc.l sr, @-r15
+ sts.l pr, @-r15
+ stc.l spc, @-r15
+
+ /* switch to bank1 and save r7->r0 */
+ mov.l 12f, r9
+ stc sr, r8
+ or r9, r8
+ ldc r8, sr
+ mov.l r7, @-r15
+ mov.l r6, @-r15
+ mov.l r5, @-r15
+ mov.l r4, @-r15
+ mov.l r3, @-r15
+ mov.l r2, @-r15
+ mov.l r1, @-r15
+ mov.l r0, @-r15
+
+ /* switch to bank0 and save r7->r0 */
+ mov.l 12f, r9
+ not r9, r9
+ stc sr, r8
+ and r9, r8
+ ldc r8, sr
+ mov.l r7, @-r15
+ mov.l r6, @-r15
+ mov.l r5, @-r15
+ mov.l r4, @-r15
+ mov.l r3, @-r15
+ mov.l r2, @-r15
+ mov.l r1, @-r15
+ mov.l r0, @-r15
+
+ mov.l r4, @-r15 /* save indirection page again */
+
+ bsr swap_pages /* swap pages before jumping to new kernel */
+ nop
+
+ mova 11f, r0
+ mov.l r15, @r0 /* save pointer to stack */
+
+ jsr @r6 /* hand over control to new kernel */
+ nop
+
+ mov.l 11f, r15 /* get pointer to stack */
+ mov.l @r15+, r4 /* restore r4 to get indirection page */
- /* stack setting */
- add r8,r5
- mov r5,r15
+ bsr swap_pages /* swap pages back to previous state */
+ nop
+ /* make sure bank0 is active and restore r0->r7 */
+ mov.l 12f, r9
+ not r9, r9
+ stc sr, r8
+ and r9, r8
+ ldc r8, sr
+ mov.l @r15+, r0
+ mov.l @r15+, r1
+ mov.l @r15+, r2
+ mov.l @r15+, r3
+ mov.l @r15+, r4
+ mov.l @r15+, r5
+ mov.l @r15+, r6
+ mov.l @r15+, r7
+
+ /* switch to bank1 and restore r0->r7 */
+ mov.l 12f, r9
+ stc sr, r8
+ or r9, r8
+ ldc r8, sr
+ mov.l @r15+, r0
+ mov.l @r15+, r1
+ mov.l @r15+, r2
+ mov.l @r15+, r3
+ mov.l @r15+, r4
+ mov.l @r15+, r5
+ mov.l @r15+, r6
+ mov.l @r15+, r7
+
+ /* switch back to bank0 */
+ mov.l 12f, r9
+ not r9, r9
+ stc sr, r8
+ and r9, r8
+ ldc r8, sr
+
+ /* restore other random registers */
+ ldc.l @r15+, spc
+ lds.l @r15+, pr
+ ldc.l @r15+, sr
+ ldc.l @r15+, ssr
+ ldc.l @r15+, gbr
+ lds.l @r15+, mach
+ lds.l @r15+, macl
+
+ /* restore r8->r15 */
+ mov.l @r15+, r8
+ mov.l @r15+, r9
+ mov.l @r15+, r10
+ mov.l @r15+, r11
+ mov.l @r15+, r12
+ mov.l @r15+, r13
+ mov.l @r15+, r14
+ mov.l @r15+, r15
+ rts
+ nop
+
+swap_pages:
bra 1f
- mov r4,r0 /* cmd = indirection_page */
+ mov r4,r0 /* cmd = indirection_page */
0:
mov.l @r4+,r0 /* cmd = *ind++ */
-1: /* addr = (cmd | P2SEG) & 0xfffffff0 */
+1: /* addr = cmd & 0xfffffff0 */
mov r0,r2
- or r9,r2
mov #-16,r1
and r1,r2
tst #1,r0
bt 2f
bra 0b
- mov r2,r5
+ mov r2,r5
2: /* else if(cmd & IND_INDIRECTION) ind = addr */
tst #2,r0
bt 3f
bra 0b
- mov r2,r4
+ mov r2,r4
-3: /* else if(cmd & IND_DONE) goto 6 */
+3: /* else if(cmd & IND_DONE) return */
tst #4,r0
bt 4f
- bra 6f
- nop
+ rts
+ nop
4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
tst #8,r0
bt 0b
- mov r8,r3
+ mov.l 10f,r3 /* PAGE_SIZE */
shlr2 r3
shlr2 r3
5:
dt r3
- mov.l @r2+,r1 /* 16n+0 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+4 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+8 */
- mov.l r1,@r5
- add #4,r5
- mov.l @r2+,r1 /* 16n+12 */
- mov.l r1,@r5
- add #4,r5
+
+ /* regular kexec just overwrites the destination page
+ * with the contents of the source page.
+ * for the kexec jump case we need to swap the contents
+ * of the pages.
+ * to keep it simple swap the contents for both cases.
+ */
+ mov.l @(0, r2), r8
+ mov.l @(0, r5), r1
+ mov.l r8, @(0, r5)
+ mov.l r1, @(0, r2)
+
+ mov.l @(4, r2), r8
+ mov.l @(4, r5), r1
+ mov.l r8, @(4, r5)
+ mov.l r1, @(4, r2)
+
+ mov.l @(8, r2), r8
+ mov.l @(8, r5), r1
+ mov.l r8, @(8, r5)
+ mov.l r1, @(8, r2)
+
+ mov.l @(12, r2), r8
+ mov.l @(12, r5), r1
+ mov.l r8, @(12, r5)
+ mov.l r1, @(12, r2)
+
+ add #16,r5
+ add #16,r2
bf 5b
bra 0b
- nop
-6:
-#ifdef CONFIG_SH_STANDARD_BIOS
- ldc r7, vbr
-#endif
- jmp @r6
- nop
+ nop
.align 2
10:
.long PAGE_SIZE
11:
- .long P2SEG
+ .long 0
+12:
+ .long 0x20000000 ! RB=1
relocate_new_kernel_end:
[CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770",
[CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781",
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
+ [CPU_SH7786] = "SH7786",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
static const char *cpu_flags[] = {
"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
- "ptea", "llsc", "l2", "op32", NULL
+ "ptea", "llsc", "l2", "op32", "pteaex", NULL
};
static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
--- /dev/null
+/*
+ * swsusp.c - SuperH hibernation support
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <asm/suspend.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fpu.h>
+
+struct swsusp_arch_regs swsusp_arch_regs_cpu0;
+
+int pfn_is_nosave(unsigned long pfn)
+{
+ unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+ unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
+
+ return (pfn >= begin_pfn) && (pfn < end_pfn);
+}
+
+void save_processor_state(void)
+{
+ init_fpu(current);
+}
+
+void restore_processor_state(void)
+{
+ local_flush_tlb_all();
+}
return 0;
}
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
- return 0;
-}
-
void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
EXPORT_SYMBOL(do_settimeofday);
#endif /* !CONFIG_GENERIC_TIME */
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
/* last time the RTC clock got updated */
static long last_rtc_update;
update_process_times(user_mode(get_irq_regs()));
#endif
}
-#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
#ifdef CONFIG_PM
int timer_suspend(struct sys_device *dev, pm_message_t state)
static int __init timer_init_sysfs(void)
{
- int ret = sysdev_class_register(&timer_sysclass);
+ int ret;
+
+ if (!sys_timer)
+ return 0;
+
+ ret = sysdev_class_register(&timer_sysclass);
if (ret != 0)
return ret;
void (*board_time_init)(void);
-/*
- * Shamelessly based on the MIPS and Sparc64 work.
- */
-static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
-unsigned long sh_hpt_frequency = 0;
-
-#define NSEC_PER_CYC_SHIFT 10
-
-static struct clocksource clocksource_sh = {
+struct clocksource clocksource_sh = {
.name = "SuperH",
- .rating = 200,
- .mask = CLOCKSOURCE_MASK(32),
- .read = null_hpt_read,
- .shift = 16,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init init_sh_clocksource(void)
-{
- if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read)
- return;
-
- clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency,
- clocksource_sh.shift);
-
- timer_ticks_per_nsec_quotient =
- clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT);
-
- clocksource_register(&clocksource_sh);
-}
-
#ifdef CONFIG_GENERIC_TIME
unsigned long long sched_clock(void)
{
- unsigned long long ticks = clocksource_sh.read();
- return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT;
+ unsigned long long cycles;
+
+ /* jiffies based sched_clock if no clocksource is installed */
+ if (!clocksource_sh.rating)
+ return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+
+ cycles = clocksource_sh.read();
+ return cyc2ns(&clocksource_sh, cycles);
}
#endif
* initialized for us.
*/
sys_timer = get_sys_timer();
- printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
-
-
- if (sys_timer->ops->read)
- clocksource_sh.read = sys_timer->ops->read;
-
- init_sh_clocksource();
-
- if (sh_hpt_frequency)
- printk("Using %lu.%03lu MHz high precision timer.\n",
- ((sh_hpt_frequency + 500) / 1000) / 1000,
- ((sh_hpt_frequency + 500) / 1000) % 1000);
+ if (unlikely(!sys_timer))
+ panic("System timer missing.\n");
+ printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
}
#define MTU2_TSR_1 0xfffe4385
#define MTU2_TCNT_1 0xfffe4386 /* 16-bit counter */
-#if defined(CONFIG_CPU_SUBTYPE_SH7201)
+#if defined(CONFIG_CPU_SUBTYPE_SH7201) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7203)
#define MTU2_TGRA_1 0xfffe4388
#else
#define MTU2_TGRA_1 0xfffe438a
_tmu_clear_status(TMU0);
_tmu_set_irq(TMU0,tmu0_clockevent.mode != CLOCK_EVT_MODE_ONESHOT);
- evt->event_handler(evt);
+ switch (tmu0_clockevent.mode) {
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_PERIODIC:
+ evt->event_handler(evt);
+ break;
+ default:
+ break;
+ }
return IRQ_HANDLED;
}
!defined(CONFIG_CPU_SUBTYPE_SH7721) && \
!defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
+ !defined(CONFIG_CPU_SUBTYPE_SH7786) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
#endif
_tmu_start(TMU1);
- sh_hpt_frequency = clk_get_rate(&tmu1_clk);
+ clocksource_sh.rating = 200;
+ clocksource_sh.mask = CLOCKSOURCE_MASK(32);
+ clocksource_sh.read = tmu_timer_read;
+ clocksource_sh.shift = 10;
+ clocksource_sh.mult = clocksource_hz2mult(clk_get_rate(&tmu1_clk),
+ clocksource_sh.shift);
+ clocksource_sh.flags = CLOCK_SOURCE_IS_CONTINUOUS;
+ clocksource_register(&clocksource_sh);
tmu0_clockevent.mult = div_sc(frequency, NSEC_PER_SEC,
tmu0_clockevent.shift);
clockevent_delta2ns(1, &tmu0_clockevent);
tmu0_clockevent.cpumask = cpumask_of(0);
+ tmu0_clockevent.rating = 100;
clockevents_register_device(&tmu0_clockevent);
.init = tmu_timer_init,
.start = tmu_timer_start,
.stop = tmu_timer_stop,
- .read = tmu_timer_read,
};
struct sys_timer tmu_timer = {
ENTRY(_start)
SECTIONS
{
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB_FIXED
+ . = CONFIG_PAGE_OFFSET + (CONFIG_MEMORY_START & 0x1fffffff) +
+ CONFIG_ZERO_PAGE_OFFSET;
+#elif defined(CONFIG_32BIT)
. = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET;
#else
. = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET;
bool
default y if CPU_SH5
-config PMB
+config PMB_ENABLE
bool "Support 32-bit physical addressing through PMB"
depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
select 32BIT
32-bits through the SH-4A PMB. If this is not set, legacy
29-bit physical addressing will be used.
+choice
+ prompt "PMB handling type"
+ depends on PMB_ENABLE
+ default PMB_FIXED
+
+config PMB
+ bool "PMB"
+ depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+ select 32BIT
+ help
+ If you say Y here, physical addressing will be extended to
+ 32-bits through the SH-4A PMB. If this is not set, legacy
+ 29-bit physical addressing will be used.
+
+config PMB_FIXED
+ bool "fixed PMB"
+ depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || \
+ CPU_SUBTYPE_SH7785)
+ select 32BIT
+ help
+ If this option is enabled, fixed PMB mappings are inherited
+ from the boot loader, and the kernel does not attempt dynamic
+ management. This is the closest to legacy 29-bit physical mode,
+ and allows systems to support up to 512MiB of system memory.
+
+endchoice
+
config X2TLB
bool "Enable extended TLB mode"
depends on (CPU_SHX2 || CPU_SHX3) && MMU && EXPERIMENTAL
endif
ifdef CONFIG_MMU
-obj-$(CONFIG_CPU_SH3) += tlb-sh3.o
-obj-$(CONFIG_CPU_SH4) += tlb-sh4.o
+tlb-$(CONFIG_CPU_SH3) := tlb-sh3.o
+tlb-$(CONFIG_CPU_SH4) := tlb-sh4.o
+tlb-$(CONFIG_CPU_HAS_PTEAEX) := tlb-pteaex.o
+obj-y += $(tlb-y)
ifndef CONFIG_CACHE_OFF
obj-$(CONFIG_CPU_SH4) += pg-sh4.o
obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PMB) += pmb.o
+obj-$(CONFIG_PMB_FIXED) += pmb-fixed.o
obj-$(CONFIG_NUMA) += numa.o
EXTRA_CFLAGS += -Werror
continue;
if (p->mm)
- seq_printf(file, "%5d : %02lx\n", pid,
+ seq_printf(file, "%5d : %04lx\n", pid,
cpu_asid(smp_processor_id(), p->mm));
- else
- seq_printf(file, "%5d : (none)\n", pid);
}
read_unlock(&tasklist_lock);
if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr))
return (void __iomem *)phys_addr;
+#if !defined(CONFIG_PMB_FIXED)
/*
* Don't allow anybody to remap normal RAM that we're using..
*/
if (phys_addr < virt_to_phys(high_memory))
return NULL;
+#endif
/*
* Mappings have to be page-aligned
area->phys_addr = phys_addr;
orig_addr = addr = (unsigned long)area->addr;
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB
/*
* First try to remap through the PMB once a valid VMA has been
* established. Smaller allocations (or the rest of the size
unsigned long seg = PXSEG(vaddr);
struct vm_struct *p;
- if (seg < P3SEG || seg >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
+ if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr))
return;
-#ifdef CONFIG_32BIT
+#ifdef CONFIG_PMB
/*
* Purge any PMB entries that may have been established for this
* mapping, then proceed with conventional VMA teardown.
--- /dev/null
+/*
+ * arch/sh/mm/fixed_pmb.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/mmu.h>
+#include <asm/mmu_context.h>
+
+static int __uses_jump_to_uncached fixed_pmb_init(void)
+{
+ int i;
+ unsigned long addr, data;
+
+ jump_to_uncached();
+
+ for (i = 0; i < PMB_ENTRY_MAX; i++) {
+ addr = PMB_DATA + (i << PMB_E_SHIFT);
+ data = ctrl_inl(addr);
+ if (!(data & PMB_V))
+ continue;
+
+ if (data & PMB_C) {
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+ data |= PMB_WT;
+#elif defined(CONFIG_CACHE_WRITEBACK)
+ data &= ~PMB_WT;
+#else
+ data &= ~(PMB_C | PMB_WT);
+#endif
+ }
+ ctrl_outl(data, addr);
+ }
+
+ back_to_cached();
+
+ return 0;
+}
+arch_initcall(fixed_pmb_init);
*/
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/bitops.h>
return 0;
}
postcore_initcall(pmb_debugfs_init);
+
+#ifdef CONFIG_PM
+static int pmb_sysdev_suspend(struct sys_device *dev, pm_message_t state)
+{
+ static pm_message_t prev_state;
+
+ /* Restore the PMB after a resume from hibernation */
+ if (state.event == PM_EVENT_ON &&
+ prev_state.event == PM_EVENT_FREEZE) {
+ struct pmb_entry *pmbe;
+ spin_lock_irq(&pmb_list_lock);
+ for (pmbe = pmb_list; pmbe; pmbe = pmbe->next)
+ set_pmb_entry(pmbe);
+ spin_unlock_irq(&pmb_list_lock);
+ }
+ prev_state = state;
+ return 0;
+}
+
+static int pmb_sysdev_resume(struct sys_device *dev)
+{
+ return pmb_sysdev_suspend(dev, PMSG_ON);
+}
+
+static struct sysdev_driver pmb_sysdev_driver = {
+ .suspend = pmb_sysdev_suspend,
+ .resume = pmb_sysdev_resume,
+};
+
+static int __init pmb_sysdev_init(void)
+{
+ return sysdev_driver_register(&cpu_sysdev_class, &pmb_sysdev_driver);
+}
+
+subsys_initcall(pmb_sysdev_init);
+#endif
--- /dev/null
+/*
+ * arch/sh/mm/tlb-pteaex.c
+ *
+ * TLB operations for SH-X3 CPUs featuring PTE ASID Extensions.
+ *
+ * Copyright (C) 2009 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <asm/system.h>
+#include <asm/mmu_context.h>
+#include <asm/cacheflush.h>
+
+void update_mmu_cache(struct vm_area_struct * vma,
+ unsigned long address, pte_t pte)
+{
+ unsigned long flags;
+ unsigned long pteval;
+ unsigned long vpn;
+
+ /* Ptrace may call this routine. */
+ if (vma && current->active_mm != vma->vm_mm)
+ return;
+
+#ifndef CONFIG_CACHE_OFF
+ {
+ unsigned long pfn = pte_pfn(pte);
+
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ if (!test_bit(PG_mapped, &page->flags)) {
+ unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
+ __flush_wback_region((void *)P1SEGADDR(phys),
+ PAGE_SIZE);
+ __set_bit(PG_mapped, &page->flags);
+ }
+ }
+ }
+#endif
+
+ local_irq_save(flags);
+
+ /* Set PTEH register */
+ vpn = address & MMU_VPN_MASK;
+ __raw_writel(vpn, MMU_PTEH);
+
+ /* Set PTEAEX */
+ __raw_writel(get_asid(), MMU_PTEAEX);
+
+ pteval = pte.pte_low;
+
+ /* Set PTEA register */
+#ifdef CONFIG_X2TLB
+ /*
+ * For the extended mode TLB this is trivial, only the ESZ and
+ * EPR bits need to be written out to PTEA, with the remainder of
+ * the protection bits (with the exception of the compat-mode SZ
+ * and PR bits, which are cleared) being written out in PTEL.
+ */
+ __raw_writel(pte.pte_high, MMU_PTEA);
+#endif
+
+ /* Set PTEL register */
+ pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
+#ifdef CONFIG_CACHE_WRITETHROUGH
+ pteval |= _PAGE_WT;
+#endif
+ /* conveniently, we want all the software flags to be 0 anyway */
+ __raw_writel(pteval, MMU_PTEL);
+
+ /* Load the TLB */
+ asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
+ local_irq_restore(flags);
+}
+
+/*
+ * While SH-X2 extended TLB mode splits out the memory-mapped I/UTLB
+ * data arrays, SH-X3 cores with PTEAEX split out the memory-mapped
+ * address arrays. In compat mode the second array is inaccessible, while
+ * in extended mode, the legacy 8-bit ASID field in address array 1 has
+ * undefined behaviour.
+ */
+void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid,
+ unsigned long page)
+{
+ jump_to_uncached();
+ __raw_writel(page, MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT);
+ __raw_writel(asid, MMU_UTLB_ADDRESS_ARRAY2 | MMU_PAGE_ASSOC_BIT);
+ back_to_cached();
+}
case CPU_SH7780:
case CPU_SH7781:
case CPU_SH7785:
+ case CPU_SH7786:
case CPU_SH7723:
case CPU_SHX3:
lmodel = &op_model_sh4a_ops;
AP325RXA SH_AP325RXA
SH7763RDP SH_SH7763RDP
SH7785LCR SH_SH7785LCR
+URQUELL SH_URQUELL
+ESPT SH_ESPT
+POLARIS SH_POLARIS
obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
+obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
--- /dev/null
+/*
+ * SuperH Timer Support - CMT
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/err.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/sh_cmt.h>
+
+struct sh_cmt_priv {
+ void __iomem *mapbase;
+ struct clk *clk;
+ unsigned long width; /* 16 or 32 bit version of hardware block */
+ unsigned long overflow_bit;
+ unsigned long clear_bits;
+ struct irqaction irqaction;
+ struct platform_device *pdev;
+
+ unsigned long flags;
+ unsigned long match_value;
+ unsigned long next_match_value;
+ unsigned long max_match_value;
+ unsigned long rate;
+ spinlock_t lock;
+ struct clock_event_device ced;
+ unsigned long total_cycles;
+};
+
+static DEFINE_SPINLOCK(sh_cmt_lock);
+
+#define CMSTR -1 /* shared register */
+#define CMCSR 0 /* channel register */
+#define CMCNT 1 /* channel register */
+#define CMCOR 2 /* channel register */
+
+static inline unsigned long sh_cmt_read(struct sh_cmt_priv *p, int reg_nr)
+{
+ struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == CMSTR) {
+ offs = 0;
+ base -= cfg->channel_offset;
+ } else
+ offs = reg_nr;
+
+ if (p->width == 16)
+ offs <<= 1;
+ else {
+ offs <<= 2;
+ if ((reg_nr == CMCNT) || (reg_nr == CMCOR))
+ return ioread32(base + offs);
+ }
+
+ return ioread16(base + offs);
+}
+
+static inline void sh_cmt_write(struct sh_cmt_priv *p, int reg_nr,
+ unsigned long value)
+{
+ struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ void __iomem *base = p->mapbase;
+ unsigned long offs;
+
+ if (reg_nr == CMSTR) {
+ offs = 0;
+ base -= cfg->channel_offset;
+ } else
+ offs = reg_nr;
+
+ if (p->width == 16)
+ offs <<= 1;
+ else {
+ offs <<= 2;
+ if ((reg_nr == CMCNT) || (reg_nr == CMCOR)) {
+ iowrite32(value, base + offs);
+ return;
+ }
+ }
+
+ iowrite16(value, base + offs);
+}
+
+static unsigned long sh_cmt_get_counter(struct sh_cmt_priv *p,
+ int *has_wrapped)
+{
+ unsigned long v1, v2, v3;
+
+ /* Make sure the timer value is stable. Stolen from acpi_pm.c */
+ do {
+ v1 = sh_cmt_read(p, CMCNT);
+ v2 = sh_cmt_read(p, CMCNT);
+ v3 = sh_cmt_read(p, CMCNT);
+ } while (unlikely((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+ || (v3 > v1 && v3 < v2)));
+
+ *has_wrapped = sh_cmt_read(p, CMCSR) & p->overflow_bit;
+ return v2;
+}
+
+
+static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
+{
+ struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ unsigned long flags, value;
+
+ /* start stop register shared by multiple timer channels */
+ spin_lock_irqsave(&sh_cmt_lock, flags);
+ value = sh_cmt_read(p, CMSTR);
+
+ if (start)
+ value |= 1 << cfg->timer_bit;
+ else
+ value &= ~(1 << cfg->timer_bit);
+
+ sh_cmt_write(p, CMSTR, value);
+ spin_unlock_irqrestore(&sh_cmt_lock, flags);
+}
+
+static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
+{
+ struct sh_cmt_config *cfg = p->pdev->dev.platform_data;
+ int ret;
+
+ /* enable clock */
+ ret = clk_enable(p->clk);
+ if (ret) {
+ pr_err("sh_cmt: cannot enable clock \"%s\"\n", cfg->clk);
+ return ret;
+ }
+ *rate = clk_get_rate(p->clk) / 8;
+
+ /* make sure channel is disabled */
+ sh_cmt_start_stop_ch(p, 0);
+
+ /* configure channel, periodic mode and maximum timeout */
+ if (p->width == 16)
+ sh_cmt_write(p, CMCSR, 0);
+ else
+ sh_cmt_write(p, CMCSR, 0x01a4);
+
+ sh_cmt_write(p, CMCOR, 0xffffffff);
+ sh_cmt_write(p, CMCNT, 0);
+
+ /* enable channel */
+ sh_cmt_start_stop_ch(p, 1);
+ return 0;
+}
+
+static void sh_cmt_disable(struct sh_cmt_priv *p)
+{
+ /* disable channel */
+ sh_cmt_start_stop_ch(p, 0);
+
+ /* stop clock */
+ clk_disable(p->clk);
+}
+
+/* private flags */
+#define FLAG_CLOCKEVENT (1 << 0)
+#define FLAG_CLOCKSOURCE (1 << 1)
+#define FLAG_REPROGRAM (1 << 2)
+#define FLAG_SKIPEVENT (1 << 3)
+#define FLAG_IRQCONTEXT (1 << 4)
+
+static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p,
+ int absolute)
+{
+ unsigned long new_match;
+ unsigned long value = p->next_match_value;
+ unsigned long delay = 0;
+ unsigned long now = 0;
+ int has_wrapped;
+
+ now = sh_cmt_get_counter(p, &has_wrapped);
+ p->flags |= FLAG_REPROGRAM; /* force reprogram */
+
+ if (has_wrapped) {
+ /* we're competing with the interrupt handler.
+ * -> let the interrupt handler reprogram the timer.
+ * -> interrupt number two handles the event.
+ */
+ p->flags |= FLAG_SKIPEVENT;
+ return;
+ }
+
+ if (absolute)
+ now = 0;
+
+ do {
+ /* reprogram the timer hardware,
+ * but don't save the new match value yet.
+ */
+ new_match = now + value + delay;
+ if (new_match > p->max_match_value)
+ new_match = p->max_match_value;
+
+ sh_cmt_write(p, CMCOR, new_match);
+
+ now = sh_cmt_get_counter(p, &has_wrapped);
+ if (has_wrapped && (new_match > p->match_value)) {
+ /* we are changing to a greater match value,
+ * so this wrap must be caused by the counter
+ * matching the old value.
+ * -> first interrupt reprograms the timer.
+ * -> interrupt number two handles the event.
+ */
+ p->flags |= FLAG_SKIPEVENT;
+ break;
+ }
+
+ if (has_wrapped) {
+ /* we are changing to a smaller match value,
+ * so the wrap must be caused by the counter
+ * matching the new value.
+ * -> save programmed match value.
+ * -> let isr handle the event.
+ */
+ p->match_value = new_match;
+ break;
+ }
+
+ /* be safe: verify hardware settings */
+ if (now < new_match) {
+ /* timer value is below match value, all good.
+ * this makes sure we won't miss any match events.
+ * -> save programmed match value.
+ * -> let isr handle the event.
+ */
+ p->match_value = new_match;
+ break;
+ }
+
+ /* the counter has reached a value greater
+ * than our new match value. and since the
+ * has_wrapped flag isn't set we must have
+ * programmed a too close event.
+ * -> increase delay and retry.
+ */
+ if (delay)
+ delay <<= 1;
+ else
+ delay = 1;
+
+ if (!delay)
+ pr_warning("sh_cmt: too long delay\n");
+
+ } while (delay);
+}
+
+static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+{
+ unsigned long flags;
+
+ if (delta > p->max_match_value)
+ pr_warning("sh_cmt: delta out of range\n");
+
+ spin_lock_irqsave(&p->lock, flags);
+ p->next_match_value = delta;
+ sh_cmt_clock_event_program_verify(p, 0);
+ spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
+{
+ struct sh_cmt_priv *p = dev_id;
+
+ /* clear flags */
+ sh_cmt_write(p, CMCSR, sh_cmt_read(p, CMCSR) & p->clear_bits);
+
+ /* update clock source counter to begin with if enabled
+ * the wrap flag should be cleared by the timer specific
+ * isr before we end up here.
+ */
+ if (p->flags & FLAG_CLOCKSOURCE)
+ p->total_cycles += p->match_value;
+
+ if (!(p->flags & FLAG_REPROGRAM))
+ p->next_match_value = p->max_match_value;
+
+ p->flags |= FLAG_IRQCONTEXT;
+
+ if (p->flags & FLAG_CLOCKEVENT) {
+ if (!(p->flags & FLAG_SKIPEVENT)) {
+ if (p->ced.mode == CLOCK_EVT_MODE_ONESHOT) {
+ p->next_match_value = p->max_match_value;
+ p->flags |= FLAG_REPROGRAM;
+ }
+
+ p->ced.event_handler(&p->ced);
+ }
+ }
+
+ p->flags &= ~FLAG_SKIPEVENT;
+
+ if (p->flags & FLAG_REPROGRAM) {
+ p->flags &= ~FLAG_REPROGRAM;
+ sh_cmt_clock_event_program_verify(p, 1);
+
+ if (p->flags & FLAG_CLOCKEVENT)
+ if ((p->ced.mode == CLOCK_EVT_MODE_SHUTDOWN)
+ || (p->match_value == p->next_match_value))
+ p->flags &= ~FLAG_REPROGRAM;
+ }
+
+ p->flags &= ~FLAG_IRQCONTEXT;
+
+ return IRQ_HANDLED;
+}
+
+static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&p->lock, flags);
+
+ if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
+ ret = sh_cmt_enable(p, &p->rate);
+
+ if (ret)
+ goto out;
+ p->flags |= flag;
+
+ /* setup timeout if no clockevent */
+ if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
+ sh_cmt_set_next(p, p->max_match_value);
+ out:
+ spin_unlock_irqrestore(&p->lock, flags);
+
+ return ret;
+}
+
+static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
+{
+ unsigned long flags;
+ unsigned long f;
+
+ spin_lock_irqsave(&p->lock, flags);
+
+ f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
+ p->flags &= ~flag;
+
+ if (f && !(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
+ sh_cmt_disable(p);
+
+ /* adjust the timeout to maximum if only clocksource left */
+ if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
+ sh_cmt_set_next(p, p->max_match_value);
+
+ spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static struct sh_cmt_priv *ced_to_sh_cmt(struct clock_event_device *ced)
+{
+ return container_of(ced, struct sh_cmt_priv, ced);
+}
+
+static void sh_cmt_clock_event_start(struct sh_cmt_priv *p, int periodic)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ sh_cmt_start(p, FLAG_CLOCKEVENT);
+
+ /* TODO: calculate good shift from rate and counter bit width */
+
+ ced->shift = 32;
+ ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
+ ced->max_delta_ns = clockevent_delta2ns(p->max_match_value, ced);
+ ced->min_delta_ns = clockevent_delta2ns(0x1f, ced);
+
+ if (periodic)
+ sh_cmt_set_next(p, (p->rate + HZ/2) / HZ);
+ else
+ sh_cmt_set_next(p, p->max_match_value);
+}
+
+static void sh_cmt_clock_event_mode(enum clock_event_mode mode,
+ struct clock_event_device *ced)
+{
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ /* deal with old setting first */
+ switch (ced->mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ case CLOCK_EVT_MODE_ONESHOT:
+ sh_cmt_stop(p, FLAG_CLOCKEVENT);
+ break;
+ default:
+ break;
+ }
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ pr_info("sh_cmt: %s used for periodic clock events\n",
+ ced->name);
+ sh_cmt_clock_event_start(p, 1);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ pr_info("sh_cmt: %s used for oneshot clock events\n",
+ ced->name);
+ sh_cmt_clock_event_start(p, 0);
+ break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ sh_cmt_stop(p, FLAG_CLOCKEVENT);
+ break;
+ default:
+ break;
+ }
+}
+
+static int sh_cmt_clock_event_next(unsigned long delta,
+ struct clock_event_device *ced)
+{
+ struct sh_cmt_priv *p = ced_to_sh_cmt(ced);
+
+ BUG_ON(ced->mode != CLOCK_EVT_MODE_ONESHOT);
+ if (likely(p->flags & FLAG_IRQCONTEXT))
+ p->next_match_value = delta;
+ else
+ sh_cmt_set_next(p, delta);
+
+ return 0;
+}
+
+static void sh_cmt_register_clockevent(struct sh_cmt_priv *p,
+ char *name, unsigned long rating)
+{
+ struct clock_event_device *ced = &p->ced;
+
+ memset(ced, 0, sizeof(*ced));
+
+ ced->name = name;
+ ced->features = CLOCK_EVT_FEAT_PERIODIC;
+ ced->features |= CLOCK_EVT_FEAT_ONESHOT;
+ ced->rating = rating;
+ ced->cpumask = cpumask_of(0);
+ ced->set_next_event = sh_cmt_clock_event_next;
+ ced->set_mode = sh_cmt_clock_event_mode;
+
+ pr_info("sh_cmt: %s used for clock events\n", ced->name);
+ ced->mult = 1; /* work around misplaced WARN_ON() in clockevents.c */
+ clockevents_register_device(ced);
+}
+
+int sh_cmt_register(struct sh_cmt_priv *p, char *name,
+ unsigned long clockevent_rating,
+ unsigned long clocksource_rating)
+{
+ if (p->width == (sizeof(p->max_match_value) * 8))
+ p->max_match_value = ~0;
+ else
+ p->max_match_value = (1 << p->width) - 1;
+
+ p->match_value = p->max_match_value;
+ spin_lock_init(&p->lock);
+
+ if (clockevent_rating)
+ sh_cmt_register_clockevent(p, name, clockevent_rating);
+
+ return 0;
+}
+
+static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
+{
+ struct sh_cmt_config *cfg = pdev->dev.platform_data;
+ struct resource *res;
+ int irq, ret;
+ ret = -ENXIO;
+
+ memset(p, 0, sizeof(*p));
+ p->pdev = pdev;
+
+ if (!cfg) {
+ dev_err(&p->pdev->dev, "missing platform data\n");
+ goto err0;
+ }
+
+ platform_set_drvdata(pdev, p);
+
+ res = platform_get_resource(p->pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&p->pdev->dev, "failed to get I/O memory\n");
+ goto err0;
+ }
+
+ irq = platform_get_irq(p->pdev, 0);
+ if (irq < 0) {
+ dev_err(&p->pdev->dev, "failed to get irq\n");
+ goto err0;
+ }
+
+ /* map memory, let mapbase point to our channel */
+ p->mapbase = ioremap_nocache(res->start, resource_size(res));
+ if (p->mapbase == NULL) {
+ pr_err("sh_cmt: failed to remap I/O memory\n");
+ goto err0;
+ }
+
+ /* request irq using setup_irq() (too early for request_irq()) */
+ p->irqaction.name = cfg->name;
+ p->irqaction.handler = sh_cmt_interrupt;
+ p->irqaction.dev_id = p;
+ p->irqaction.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL;
+ p->irqaction.mask = CPU_MASK_NONE;
+ ret = setup_irq(irq, &p->irqaction);
+ if (ret) {
+ pr_err("sh_cmt: failed to request irq %d\n", irq);
+ goto err1;
+ }
+
+ /* get hold of clock */
+ p->clk = clk_get(&p->pdev->dev, cfg->clk);
+ if (IS_ERR(p->clk)) {
+ pr_err("sh_cmt: cannot get clock \"%s\"\n", cfg->clk);
+ ret = PTR_ERR(p->clk);
+ goto err2;
+ }
+
+ if (resource_size(res) == 6) {
+ p->width = 16;
+ p->overflow_bit = 0x80;
+ p->clear_bits = ~0xc0;
+ } else {
+ p->width = 32;
+ p->overflow_bit = 0x8000;
+ p->clear_bits = ~0xc000;
+ }
+
+ return sh_cmt_register(p, cfg->name,
+ cfg->clockevent_rating,
+ cfg->clocksource_rating);
+ err2:
+ free_irq(irq, p);
+ err1:
+ iounmap(p->mapbase);
+ err0:
+ return ret;
+}
+
+static int __devinit sh_cmt_probe(struct platform_device *pdev)
+{
+ struct sh_cmt_priv *p = platform_get_drvdata(pdev);
+ int ret;
+
+ p = kmalloc(sizeof(*p), GFP_KERNEL);
+ if (p == NULL) {
+ dev_err(&pdev->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ ret = sh_cmt_setup(p, pdev);
+ if (ret) {
+ kfree(p);
+
+ platform_set_drvdata(pdev, NULL);
+ }
+ return ret;
+}
+
+static int __devexit sh_cmt_remove(struct platform_device *pdev)
+{
+ return -EBUSY; /* cannot unregister clockevent and clocksource */
+}
+
+static struct platform_driver sh_cmt_device_driver = {
+ .probe = sh_cmt_probe,
+ .remove = __devexit_p(sh_cmt_remove),
+ .driver = {
+ .name = "sh_cmt",
+ }
+};
+
+static int __init sh_cmt_init(void)
+{
+ return platform_driver_register(&sh_cmt_device_driver);
+}
+
+static void __exit sh_cmt_exit(void)
+{
+ platform_driver_unregister(&sh_cmt_device_driver);
+}
+
+module_init(sh_cmt_init);
+module_exit(sh_cmt_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("SuperH CMT Timer Driver");
+MODULE_LICENSE("GPL v2");
* Based on drivers/usb/iforce.c
*
* Copyright Yaegashi Takeshi, 2001
- * Adrian McMenamin, 2008
+ * Adrian McMenamin, 2008 - 2009
*/
#include <linux/kernel.h>
struct maple_device *mapledev = mq->dev;
struct dc_pad *pad = maple_get_drvdata(mapledev);
struct input_dev *dev = pad->dev;
- unsigned char *res = mq->recvbuf;
+ unsigned char *res = mq->recvbuf->buf;
buttons = ~le16_to_cpup((__le16 *)(res + 8));
/*
* SEGA Dreamcast keyboard driver
* Based on drivers/usb/usbkbd.c
- * Copyright YAEGASHI Takeshi, 2001
- * Porting to 2.6 Copyright Adrian McMenamin, 2007, 2008
+ * Copyright (c) YAEGASHI Takeshi, 2001
+ * Porting to 2.6 Copyright (c) Adrian McMenamin, 2007 - 2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define NR_SCANCODES 256
-MODULE_AUTHOR("YAEGASHI Takeshi, Adrian McMenamin");
+MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk");
MODULE_DESCRIPTION("SEGA Dreamcast keyboard driver");
MODULE_LICENSE("GPL");
input_event(dev, EV_MSC, MSC_SCAN, code);
input_report_key(dev, keycode, 0);
} else
- printk(KERN_DEBUG "maple_keyb: "
+ dev_dbg(&dev->dev,
"Unknown key (scancode %#x) released.",
code);
}
input_event(dev, EV_MSC, MSC_SCAN, code);
input_report_key(dev, keycode, 1);
} else
- printk(KERN_DEBUG "maple_keyb: "
+ dev_dbg(&dev->dev,
"Unknown key (scancode %#x) pressed.",
code);
}
{
struct maple_device *mapledev = mq->dev;
struct dc_kbd *kbd = maple_get_drvdata(mapledev);
- unsigned long *buf = mq->recvbuf;
+ unsigned long *buf = (unsigned long *)(mq->recvbuf->buf);
/*
* We should always get the lock because the only
static int probe_maple_kbd(struct device *dev)
{
- struct maple_device *mdev = to_maple_dev(dev);
- struct maple_driver *mdrv = to_maple_driver(dev->driver);
+ struct maple_device *mdev;
+ struct maple_driver *mdrv;
int i, error;
struct dc_kbd *kbd;
struct input_dev *idev;
- if (!(mdev->function & MAPLE_FUNC_KEYBOARD))
- return -EINVAL;
+ mdev = to_maple_dev(dev);
+ mdrv = to_maple_driver(dev->driver);
kbd = kzalloc(sizeof(struct dc_kbd), GFP_KERNEL);
- idev = input_allocate_device();
- if (!kbd || !idev) {
+ if (!kbd) {
error = -ENOMEM;
goto fail;
}
+ idev = input_allocate_device();
+ if (!idev) {
+ error = -ENOMEM;
+ goto fail_idev_alloc;
+ }
+
kbd->dev = idev;
memcpy(kbd->keycode, dc_kbd_keycode, sizeof(kbd->keycode));
error = input_register_device(idev);
if (error)
- goto fail;
+ goto fail_register;
/* Maple polling is locked to VBLANK - which may be just 50/s */
maple_getcond_callback(mdev, dc_kbd_callback, HZ/50,
return error;
-fail:
+fail_register:
+ maple_set_drvdata(mdev, NULL);
input_free_device(idev);
+fail_idev_alloc:
kfree(kbd);
- maple_set_drvdata(mdev, NULL);
+fail:
return error;
}
pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
+
+ device_init_wakeup(&pdev->dev, 1);
return 0;
err5:
free_irq(irq, pdev);
return 0;
}
+static int sh_keysc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
+ unsigned short value;
+
+ value = ioread16(priv->iomem_base + KYCR1_OFFS);
+
+ if (device_may_wakeup(dev))
+ value |= 0x80;
+ else
+ value &= ~0x80;
-#define sh_keysc_suspend NULL
-#define sh_keysc_resume NULL
+ iowrite16(value, priv->iomem_base + KYCR1_OFFS);
+ return 0;
+}
+
+static struct dev_pm_ops sh_keysc_dev_pm_ops = {
+ .suspend = sh_keysc_suspend,
+};
struct platform_driver sh_keysc_device_driver = {
.probe = sh_keysc_probe,
.remove = __devexit_p(sh_keysc_remove),
- .suspend = sh_keysc_suspend,
- .resume = sh_keysc_resume,
.driver = {
.name = "sh_keysc",
+ .pm = &sh_keysc_dev_pm_ops,
}
};
This selection automatically selects the map_ram driver.
-endmenu
+config MTD_VMU
+ tristate "Map driver for Dreamcast VMU"
+ depends on MAPLE
+ help
+ This driver enables access to the Dreamcast Visual Memory Unit (VMU).
+
+ Most Dreamcast users will want to say Y here.
+ To build this as a module select M here, the module will be called
+ vmu-flash.
+
+endmenu
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+obj-$(CONFIG_MTD_VMU) += vmu-flash.o
--- /dev/null
+/* vmu-flash.c
+ * Driver for SEGA Dreamcast Visual Memory Unit
+ *
+ * Copyright (c) Adrian McMenamin 2002 - 2009
+ * Copyright (c) Paul Mundt 2001
+ *
+ * Licensed under version 2 of the
+ * GNU General Public Licence
+ */
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/maple.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+
+struct vmu_cache {
+ unsigned char *buffer; /* Cache */
+ unsigned int block; /* Which block was cached */
+ unsigned long jiffies_atc; /* When was it cached? */
+ int valid;
+};
+
+struct mdev_part {
+ struct maple_device *mdev;
+ int partition;
+};
+
+struct vmupart {
+ u16 user_blocks;
+ u16 root_block;
+ u16 numblocks;
+ char *name;
+ struct vmu_cache *pcache;
+};
+
+struct memcard {
+ u16 tempA;
+ u16 tempB;
+ u32 partitions;
+ u32 blocklen;
+ u32 writecnt;
+ u32 readcnt;
+ u32 removeable;
+ int partition;
+ int read;
+ unsigned char *blockread;
+ struct vmupart *parts;
+ struct mtd_info *mtd;
+};
+
+struct vmu_block {
+ unsigned int num; /* block number */
+ unsigned int ofs; /* block offset */
+};
+
+static struct vmu_block *ofs_to_block(unsigned long src_ofs,
+ struct mtd_info *mtd, int partition)
+{
+ struct vmu_block *vblock;
+ struct maple_device *mdev;
+ struct memcard *card;
+ struct mdev_part *mpart;
+ int num;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ card = maple_get_drvdata(mdev);
+
+ if (src_ofs >= card->parts[partition].numblocks * card->blocklen)
+ goto failed;
+
+ num = src_ofs / card->blocklen;
+ if (num > card->parts[partition].numblocks)
+ goto failed;
+
+ vblock = kmalloc(sizeof(struct vmu_block), GFP_KERNEL);
+ if (!vblock)
+ goto failed;
+
+ vblock->num = num;
+ vblock->ofs = src_ofs % card->blocklen;
+ return vblock;
+
+failed:
+ return NULL;
+}
+
+/* Maple bus callback function for reads */
+static void vmu_blockread(struct mapleq *mq)
+{
+ struct maple_device *mdev;
+ struct memcard *card;
+
+ mdev = mq->dev;
+ card = maple_get_drvdata(mdev);
+ /* copy the read in data */
+
+ if (unlikely(!card->blockread))
+ return;
+
+ memcpy(card->blockread, mq->recvbuf->buf + 12,
+ card->blocklen/card->readcnt);
+
+}
+
+/* Interface with maple bus to read blocks
+ * caching the results so that other parts
+ * of the driver can access block reads */
+static int maple_vmu_read_block(unsigned int num, unsigned char *buf,
+ struct mtd_info *mtd)
+{
+ struct memcard *card;
+ struct mdev_part *mpart;
+ struct maple_device *mdev;
+ int partition, error = 0, x, wait;
+ unsigned char *blockread = NULL;
+ struct vmu_cache *pcache;
+ __be32 sendbuf;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ partition = mpart->partition;
+ card = maple_get_drvdata(mdev);
+ pcache = card->parts[partition].pcache;
+ pcache->valid = 0;
+
+ /* prepare the cache for this block */
+ if (!pcache->buffer) {
+ pcache->buffer = kmalloc(card->blocklen, GFP_KERNEL);
+ if (!pcache->buffer) {
+ dev_err(&mdev->dev, "VMU at (%d, %d) - read fails due"
+ " to lack of memory\n", mdev->port,
+ mdev->unit);
+ error = -ENOMEM;
+ goto outB;
+ }
+ }
+
+ /*
+ * Reads may be phased - again the hardware spec
+ * supports this - though may not be any devices in
+ * the wild that implement it, but we will here
+ */
+ for (x = 0; x < card->readcnt; x++) {
+ sendbuf = cpu_to_be32(partition << 24 | x << 16 | num);
+
+ if (atomic_read(&mdev->busy) == 1) {
+ wait_event_interruptible_timeout(mdev->maple_wait,
+ atomic_read(&mdev->busy) == 0, HZ);
+ if (atomic_read(&mdev->busy) == 1) {
+ dev_notice(&mdev->dev, "VMU at (%d, %d)"
+ " is busy\n", mdev->port, mdev->unit);
+ error = -EAGAIN;
+ goto outB;
+ }
+ }
+
+ atomic_set(&mdev->busy, 1);
+ blockread = kmalloc(card->blocklen/card->readcnt, GFP_KERNEL);
+ if (!blockread) {
+ error = -ENOMEM;
+ atomic_set(&mdev->busy, 0);
+ goto outB;
+ }
+ card->blockread = blockread;
+
+ maple_getcond_callback(mdev, vmu_blockread, 0,
+ MAPLE_FUNC_MEMCARD);
+ error = maple_add_packet(mdev, MAPLE_FUNC_MEMCARD,
+ MAPLE_COMMAND_BREAD, 2, &sendbuf);
+ /* Very long timeouts seem to be needed when box is stressed */
+ wait = wait_event_interruptible_timeout(mdev->maple_wait,
+ (atomic_read(&mdev->busy) == 0 ||
+ atomic_read(&mdev->busy) == 2), HZ * 3);
+ /*
+ * MTD layer does not handle hotplugging well
+ * so have to return errors when VMU is unplugged
+ * in the middle of a read (busy == 2)
+ */
+ if (error || atomic_read(&mdev->busy) == 2) {
+ if (atomic_read(&mdev->busy) == 2)
+ error = -ENXIO;
+ atomic_set(&mdev->busy, 0);
+ card->blockread = NULL;
+ goto outA;
+ }
+ if (wait == 0 || wait == -ERESTARTSYS) {
+ card->blockread = NULL;
+ atomic_set(&mdev->busy, 0);
+ error = -EIO;
+ list_del_init(&(mdev->mq->list));
+ kfree(mdev->mq->sendbuf);
+ mdev->mq->sendbuf = NULL;
+ if (wait == -ERESTARTSYS) {
+ dev_warn(&mdev->dev, "VMU read on (%d, %d)"
+ " interrupted on block 0x%X\n",
+ mdev->port, mdev->unit, num);
+ } else
+ dev_notice(&mdev->dev, "VMU read on (%d, %d)"
+ " timed out on block 0x%X\n",
+ mdev->port, mdev->unit, num);
+ goto outA;
+ }
+
+ memcpy(buf + (card->blocklen/card->readcnt) * x, blockread,
+ card->blocklen/card->readcnt);
+
+ memcpy(pcache->buffer + (card->blocklen/card->readcnt) * x,
+ card->blockread, card->blocklen/card->readcnt);
+ card->blockread = NULL;
+ pcache->block = num;
+ pcache->jiffies_atc = jiffies;
+ pcache->valid = 1;
+ kfree(blockread);
+ }
+
+ return error;
+
+outA:
+ kfree(blockread);
+outB:
+ return error;
+}
+
+/* communicate with maple bus for phased writing */
+static int maple_vmu_write_block(unsigned int num, const unsigned char *buf,
+ struct mtd_info *mtd)
+{
+ struct memcard *card;
+ struct mdev_part *mpart;
+ struct maple_device *mdev;
+ int partition, error, locking, x, phaselen, wait;
+ __be32 *sendbuf;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ partition = mpart->partition;
+ card = maple_get_drvdata(mdev);
+
+ phaselen = card->blocklen/card->writecnt;
+
+ sendbuf = kmalloc(phaselen + 4, GFP_KERNEL);
+ if (!sendbuf) {
+ error = -ENOMEM;
+ goto fail_nosendbuf;
+ }
+ for (x = 0; x < card->writecnt; x++) {
+ sendbuf[0] = cpu_to_be32(partition << 24 | x << 16 | num);
+ memcpy(&sendbuf[1], buf + phaselen * x, phaselen);
+ /* wait until the device is not busy doing something else
+ * or 1 second - which ever is longer */
+ if (atomic_read(&mdev->busy) == 1) {
+ wait_event_interruptible_timeout(mdev->maple_wait,
+ atomic_read(&mdev->busy) == 0, HZ);
+ if (atomic_read(&mdev->busy) == 1) {
+ error = -EBUSY;
+ dev_notice(&mdev->dev, "VMU write at (%d, %d)"
+ "failed - device is busy\n",
+ mdev->port, mdev->unit);
+ goto fail_nolock;
+ }
+ }
+ atomic_set(&mdev->busy, 1);
+
+ locking = maple_add_packet(mdev, MAPLE_FUNC_MEMCARD,
+ MAPLE_COMMAND_BWRITE, phaselen / 4 + 2, sendbuf);
+ wait = wait_event_interruptible_timeout(mdev->maple_wait,
+ atomic_read(&mdev->busy) == 0, HZ/10);
+ if (locking) {
+ error = -EIO;
+ atomic_set(&mdev->busy, 0);
+ goto fail_nolock;
+ }
+ if (atomic_read(&mdev->busy) == 2) {
+ atomic_set(&mdev->busy, 0);
+ } else if (wait == 0 || wait == -ERESTARTSYS) {
+ error = -EIO;
+ dev_warn(&mdev->dev, "Write at (%d, %d) of block"
+ " 0x%X at phase %d failed: could not"
+ " communicate with VMU", mdev->port,
+ mdev->unit, num, x);
+ atomic_set(&mdev->busy, 0);
+ kfree(mdev->mq->sendbuf);
+ mdev->mq->sendbuf = NULL;
+ list_del_init(&(mdev->mq->list));
+ goto fail_nolock;
+ }
+ }
+ kfree(sendbuf);
+
+ return card->blocklen;
+
+fail_nolock:
+ kfree(sendbuf);
+fail_nosendbuf:
+ dev_err(&mdev->dev, "VMU (%d, %d): write failed\n", mdev->port,
+ mdev->unit);
+ return error;
+}
+
+/* mtd function to simulate reading byte by byte */
+static unsigned char vmu_flash_read_char(unsigned long ofs, int *retval,
+ struct mtd_info *mtd)
+{
+ struct vmu_block *vblock;
+ struct memcard *card;
+ struct mdev_part *mpart;
+ struct maple_device *mdev;
+ unsigned char *buf, ret;
+ int partition, error;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ partition = mpart->partition;
+ card = maple_get_drvdata(mdev);
+ *retval = 0;
+
+ buf = kmalloc(card->blocklen, GFP_KERNEL);
+ if (!buf) {
+ *retval = 1;
+ ret = -ENOMEM;
+ goto finish;
+ }
+
+ vblock = ofs_to_block(ofs, mtd, partition);
+ if (!vblock) {
+ *retval = 3;
+ ret = -ENOMEM;
+ goto out_buf;
+ }
+
+ error = maple_vmu_read_block(vblock->num, buf, mtd);
+ if (error) {
+ ret = error;
+ *retval = 2;
+ goto out_vblock;
+ }
+
+ ret = buf[vblock->ofs];
+
+out_vblock:
+ kfree(vblock);
+out_buf:
+ kfree(buf);
+finish:
+ return ret;
+}
+
+/* mtd higher order function to read flash */
+static int vmu_flash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct maple_device *mdev;
+ struct memcard *card;
+ struct mdev_part *mpart;
+ struct vmu_cache *pcache;
+ struct vmu_block *vblock;
+ int index = 0, retval, partition, leftover, numblocks;
+ unsigned char cx;
+
+ if (len < 1)
+ return -EIO;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ partition = mpart->partition;
+ card = maple_get_drvdata(mdev);
+
+ numblocks = card->parts[partition].numblocks;
+ if (from + len > numblocks * card->blocklen)
+ len = numblocks * card->blocklen - from;
+ if (len == 0)
+ return -EIO;
+ /* Have we cached this bit already? */
+ pcache = card->parts[partition].pcache;
+ do {
+ vblock = ofs_to_block(from + index, mtd, partition);
+ if (!vblock)
+ return -ENOMEM;
+ /* Have we cached this and is the cache valid and timely? */
+ if (pcache->valid &&
+ time_before(jiffies, pcache->jiffies_atc + HZ) &&
+ (pcache->block == vblock->num)) {
+ /* we have cached it, so do necessary copying */
+ leftover = card->blocklen - vblock->ofs;
+ if (vblock->ofs + len - index < card->blocklen) {
+ /* only a bit of this block to copy */
+ memcpy(buf + index,
+ pcache->buffer + vblock->ofs,
+ len - index);
+ index = len;
+ } else {
+ /* otherwise copy remainder of whole block */
+ memcpy(buf + index, pcache->buffer +
+ vblock->ofs, leftover);
+ index += leftover;
+ }
+ } else {
+ /*
+ * Not cached so read one byte -
+ * but cache the rest of the block
+ */
+ cx = vmu_flash_read_char(from + index, &retval, mtd);
+ if (retval) {
+ *retlen = index;
+ kfree(vblock);
+ return cx;
+ }
+ memset(buf + index, cx, 1);
+ index++;
+ }
+ kfree(vblock);
+ } while (len > index);
+ *retlen = index;
+
+ return 0;
+}
+
+static int vmu_flash_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct maple_device *mdev;
+ struct memcard *card;
+ struct mdev_part *mpart;
+ int index = 0, partition, error = 0, numblocks;
+ struct vmu_cache *pcache;
+ struct vmu_block *vblock;
+ unsigned char *buffer;
+
+ mpart = mtd->priv;
+ mdev = mpart->mdev;
+ partition = mpart->partition;
+ card = maple_get_drvdata(mdev);
+
+ /* simple sanity checks */
+ if (len < 1) {
+ error = -EIO;
+ goto failed;
+ }
+ numblocks = card->parts[partition].numblocks;
+ if (to + len > numblocks * card->blocklen)
+ len = numblocks * card->blocklen - to;
+ if (len == 0) {
+ error = -EIO;
+ goto failed;
+ }
+
+ vblock = ofs_to_block(to, mtd, partition);
+ if (!vblock) {
+ error = -ENOMEM;
+ goto failed;
+ }
+
+ buffer = kmalloc(card->blocklen, GFP_KERNEL);
+ if (!buffer) {
+ error = -ENOMEM;
+ goto fail_buffer;
+ }
+
+ do {
+ /* Read in the block we are to write to */
+ error = maple_vmu_read_block(vblock->num, buffer, mtd);
+ if (error)
+ goto fail_io;
+
+ do {
+ buffer[vblock->ofs] = buf[index];
+ vblock->ofs++;
+ index++;
+ if (index >= len)
+ break;
+ } while (vblock->ofs < card->blocklen);
+
+ /* write out new buffer */
+ error = maple_vmu_write_block(vblock->num, buffer, mtd);
+ /* invalidate the cache */
+ pcache = card->parts[partition].pcache;
+ pcache->valid = 0;
+
+ if (error != card->blocklen)
+ goto fail_io;
+
+ vblock->num++;
+ vblock->ofs = 0;
+ } while (len > index);
+
+ kfree(buffer);
+ *retlen = index;
+ kfree(vblock);
+ return 0;
+
+fail_io:
+ kfree(buffer);
+fail_buffer:
+ kfree(vblock);
+failed:
+ dev_err(&mdev->dev, "VMU write failing with error %d\n", error);
+ return error;
+}
+
+static void vmu_flash_sync(struct mtd_info *mtd)
+{
+ /* Do nothing here */
+}
+
+/* Maple bus callback function to recursively query hardware details */
+static void vmu_queryblocks(struct mapleq *mq)
+{
+ struct maple_device *mdev;
+ unsigned short *res;
+ struct memcard *card;
+ __be32 partnum;
+ struct vmu_cache *pcache;
+ struct mdev_part *mpart;
+ struct mtd_info *mtd_cur;
+ struct vmupart *part_cur;
+ int error;
+
+ mdev = mq->dev;
+ card = maple_get_drvdata(mdev);
+ res = (unsigned short *) (mq->recvbuf->buf);
+ card->tempA = res[12];
+ card->tempB = res[6];
+
+ dev_info(&mdev->dev, "VMU device at partition %d has %d user "
+ "blocks with a root block at %d\n", card->partition,
+ card->tempA, card->tempB);
+
+ part_cur = &card->parts[card->partition];
+ part_cur->user_blocks = card->tempA;
+ part_cur->root_block = card->tempB;
+ part_cur->numblocks = card->tempB + 1;
+ part_cur->name = kmalloc(12, GFP_KERNEL);
+ if (!part_cur->name)
+ goto fail_name;
+
+ sprintf(part_cur->name, "vmu%d.%d.%d",
+ mdev->port, mdev->unit, card->partition);
+ mtd_cur = &card->mtd[card->partition];
+ mtd_cur->name = part_cur->name;
+ mtd_cur->type = 8;
+ mtd_cur->flags = MTD_WRITEABLE|MTD_NO_ERASE;
+ mtd_cur->size = part_cur->numblocks * card->blocklen;
+ mtd_cur->erasesize = card->blocklen;
+ mtd_cur->write = vmu_flash_write;
+ mtd_cur->read = vmu_flash_read;
+ mtd_cur->sync = vmu_flash_sync;
+ mtd_cur->writesize = card->blocklen;
+
+ mpart = kmalloc(sizeof(struct mdev_part), GFP_KERNEL);
+ if (!mpart)
+ goto fail_mpart;
+
+ mpart->mdev = mdev;
+ mpart->partition = card->partition;
+ mtd_cur->priv = mpart;
+ mtd_cur->owner = THIS_MODULE;
+
+ pcache = kzalloc(sizeof(struct vmu_cache), GFP_KERNEL);
+ if (!pcache)
+ goto fail_cache_create;
+ part_cur->pcache = pcache;
+
+ error = add_mtd_device(mtd_cur);
+ if (error)
+ goto fail_mtd_register;
+
+ maple_getcond_callback(mdev, NULL, 0,
+ MAPLE_FUNC_MEMCARD);
+
+ /*
+ * Set up a recursive call to the (probably theoretical)
+ * second or more partition
+ */
+ if (++card->partition < card->partitions) {
+ partnum = cpu_to_be32(card->partition << 24);
+ maple_getcond_callback(mdev, vmu_queryblocks, 0,
+ MAPLE_FUNC_MEMCARD);
+ maple_add_packet(mdev, MAPLE_FUNC_MEMCARD,
+ MAPLE_COMMAND_GETMINFO, 2, &partnum);
+ }
+ return;
+
+fail_mtd_register:
+ dev_err(&mdev->dev, "Could not register maple device at (%d, %d)"
+ "error is 0x%X\n", mdev->port, mdev->unit, error);
+ for (error = 0; error <= card->partition; error++) {
+ kfree(((card->parts)[error]).pcache);
+ ((card->parts)[error]).pcache = NULL;
+ }
+fail_cache_create:
+fail_mpart:
+ for (error = 0; error <= card->partition; error++) {
+ kfree(((card->mtd)[error]).priv);
+ ((card->mtd)[error]).priv = NULL;
+ }
+ maple_getcond_callback(mdev, NULL, 0,
+ MAPLE_FUNC_MEMCARD);
+ kfree(part_cur->name);
+fail_name:
+ return;
+}
+
+/* Handles very basic info about the flash, queries for details */
+static int __devinit vmu_connect(struct maple_device *mdev)
+{
+ unsigned long test_flash_data, basic_flash_data;
+ int c, error;
+ struct memcard *card;
+ u32 partnum = 0;
+
+ test_flash_data = be32_to_cpu(mdev->devinfo.function);
+ /* Need to count how many bits are set - to find out which
+ * function_data element has details of the memory card:
+ * using Brian Kernighan's/Peter Wegner's method */
+ for (c = 0; test_flash_data; c++)
+ test_flash_data &= test_flash_data - 1;
+
+ basic_flash_data = be32_to_cpu(mdev->devinfo.function_data[c - 1]);
+
+ card = kmalloc(sizeof(struct memcard), GFP_KERNEL);
+ if (!card) {
+ error = ENOMEM;
+ goto fail_nomem;
+ }
+
+ card->partitions = (basic_flash_data >> 24 & 0xFF) + 1;
+ card->blocklen = ((basic_flash_data >> 16 & 0xFF) + 1) << 5;
+ card->writecnt = basic_flash_data >> 12 & 0xF;
+ card->readcnt = basic_flash_data >> 8 & 0xF;
+ card->removeable = basic_flash_data >> 7 & 1;
+
+ card->partition = 0;
+
+ /*
+ * Not sure there are actually any multi-partition devices in the
+ * real world, but the hardware supports them, so, so will we
+ */
+ card->parts = kmalloc(sizeof(struct vmupart) * card->partitions,
+ GFP_KERNEL);
+ if (!card->parts) {
+ error = -ENOMEM;
+ goto fail_partitions;
+ }
+
+ card->mtd = kmalloc(sizeof(struct mtd_info) * card->partitions,
+ GFP_KERNEL);
+ if (!card->mtd) {
+ error = -ENOMEM;
+ goto fail_mtd_info;
+ }
+
+ maple_set_drvdata(mdev, card);
+
+ /*
+ * We want to trap meminfo not get cond
+ * so set interval to zero, but rely on maple bus
+ * driver to pass back the results of the meminfo
+ */
+ maple_getcond_callback(mdev, vmu_queryblocks, 0,
+ MAPLE_FUNC_MEMCARD);
+
+ /* Make sure we are clear to go */
+ if (atomic_read(&mdev->busy) == 1) {
+ wait_event_interruptible_timeout(mdev->maple_wait,
+ atomic_read(&mdev->busy) == 0, HZ);
+ if (atomic_read(&mdev->busy) == 1) {
+ dev_notice(&mdev->dev, "VMU at (%d, %d) is busy\n",
+ mdev->port, mdev->unit);
+ error = -EAGAIN;
+ goto fail_device_busy;
+ }
+ }
+
+ atomic_set(&mdev->busy, 1);
+
+ /*
+ * Set up the minfo call: vmu_queryblocks will handle
+ * the information passed back
+ */
+ error = maple_add_packet(mdev, MAPLE_FUNC_MEMCARD,
+ MAPLE_COMMAND_GETMINFO, 2, &partnum);
+ if (error) {
+ dev_err(&mdev->dev, "Could not lock VMU at (%d, %d)"
+ " error is 0x%X\n", mdev->port, mdev->unit, error);
+ goto fail_mtd_info;
+ }
+ return 0;
+
+fail_device_busy:
+ kfree(card->mtd);
+fail_mtd_info:
+ kfree(card->parts);
+fail_partitions:
+ kfree(card);
+fail_nomem:
+ return error;
+}
+
+static void __devexit vmu_disconnect(struct maple_device *mdev)
+{
+ struct memcard *card;
+ struct mdev_part *mpart;
+ int x;
+
+ mdev->callback = NULL;
+ card = maple_get_drvdata(mdev);
+ for (x = 0; x < card->partitions; x++) {
+ mpart = ((card->mtd)[x]).priv;
+ mpart->mdev = NULL;
+ del_mtd_device(&((card->mtd)[x]));
+ kfree(((card->parts)[x]).name);
+ }
+ kfree(card->parts);
+ kfree(card->mtd);
+ kfree(card);
+}
+
+/* Callback to handle eccentricities of both mtd subsystem
+ * and general flakyness of Dreamcast VMUs
+ */
+static int vmu_can_unload(struct maple_device *mdev)
+{
+ struct memcard *card;
+ int x;
+ struct mtd_info *mtd;
+
+ card = maple_get_drvdata(mdev);
+ for (x = 0; x < card->partitions; x++) {
+ mtd = &((card->mtd)[x]);
+ if (mtd->usecount > 0)
+ return 0;
+ }
+ return 1;
+}
+
+#define ERRSTR "VMU at (%d, %d) file error -"
+
+static void vmu_file_error(struct maple_device *mdev, void *recvbuf)
+{
+ enum maple_file_errors error = ((int *)recvbuf)[1];
+
+ switch (error) {
+
+ case MAPLE_FILEERR_INVALID_PARTITION:
+ dev_notice(&mdev->dev, ERRSTR " invalid partition number\n",
+ mdev->port, mdev->unit);
+ break;
+
+ case MAPLE_FILEERR_PHASE_ERROR:
+ dev_notice(&mdev->dev, ERRSTR " phase error\n",
+ mdev->port, mdev->unit);
+ break;
+
+ case MAPLE_FILEERR_INVALID_BLOCK:
+ dev_notice(&mdev->dev, ERRSTR " invalid block number\n",
+ mdev->port, mdev->unit);
+ break;
+
+ case MAPLE_FILEERR_WRITE_ERROR:
+ dev_notice(&mdev->dev, ERRSTR " write error\n",
+ mdev->port, mdev->unit);
+ break;
+
+ case MAPLE_FILEERR_INVALID_WRITE_LENGTH:
+ dev_notice(&mdev->dev, ERRSTR " invalid write length\n",
+ mdev->port, mdev->unit);
+ break;
+
+ case MAPLE_FILEERR_BAD_CRC:
+ dev_notice(&mdev->dev, ERRSTR " bad CRC\n",
+ mdev->port, mdev->unit);
+ break;
+
+ default:
+ dev_notice(&mdev->dev, ERRSTR " 0x%X\n",
+ mdev->port, mdev->unit, error);
+ }
+}
+
+
+static int __devinit probe_maple_vmu(struct device *dev)
+{
+ int error;
+ struct maple_device *mdev = to_maple_dev(dev);
+ struct maple_driver *mdrv = to_maple_driver(dev->driver);
+
+ mdev->can_unload = vmu_can_unload;
+ mdev->fileerr_handler = vmu_file_error;
+ mdev->driver = mdrv;
+
+ error = vmu_connect(mdev);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int __devexit remove_maple_vmu(struct device *dev)
+{
+ struct maple_device *mdev = to_maple_dev(dev);
+
+ vmu_disconnect(mdev);
+ return 0;
+}
+
+static struct maple_driver vmu_flash_driver = {
+ .function = MAPLE_FUNC_MEMCARD,
+ .drv = {
+ .name = "Dreamcast_visual_memory",
+ .probe = probe_maple_vmu,
+ .remove = __devexit_p(remove_maple_vmu),
+ },
+};
+
+static int __init vmu_flash_map_init(void)
+{
+ return maple_driver_register(&vmu_flash_driver);
+}
+
+static void __exit vmu_flash_map_exit(void)
+{
+ maple_driver_unregister(&vmu_flash_driver);
+}
+
+module_init(vmu_flash_map_init);
+module_exit(vmu_flash_map_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Adrian McMenamin");
+MODULE_DESCRIPTION("Flash mapping for Sega Dreamcast visual memory");
#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
-#define DRV_VERSION "0.2.0"
+#define DRV_VERSION "0.2.1"
#define RTC_REG(r) ((r) * rtc_reg_size)
unsigned short periodic_freq;
};
-static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
+static int __sh_rtc_interrupt(struct sh_rtc *rtc)
{
- struct sh_rtc *rtc = dev_id;
- unsigned int tmp;
-
- spin_lock(&rtc->lock);
+ unsigned int tmp, pending;
tmp = readb(rtc->regbase + RCR1);
+ pending = tmp & RCR1_CF;
tmp &= ~RCR1_CF;
writeb(tmp, rtc->regbase + RCR1);
/* Users have requested One x Second IRQ */
- if (rtc->periodic_freq & PF_OXS)
+ if (pending && rtc->periodic_freq & PF_OXS)
rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
- spin_unlock(&rtc->lock);
-
- return IRQ_HANDLED;
+ return pending;
}
-static irqreturn_t sh_rtc_alarm(int irq, void *dev_id)
+static int __sh_rtc_alarm(struct sh_rtc *rtc)
{
- struct sh_rtc *rtc = dev_id;
- unsigned int tmp;
-
- spin_lock(&rtc->lock);
+ unsigned int tmp, pending;
tmp = readb(rtc->regbase + RCR1);
+ pending = tmp & RCR1_AF;
tmp &= ~(RCR1_AF | RCR1_AIE);
- writeb(tmp, rtc->regbase + RCR1);
-
- rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+ writeb(tmp, rtc->regbase + RCR1);
- spin_unlock(&rtc->lock);
+ if (pending)
+ rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
- return IRQ_HANDLED;
+ return pending;
}
-static irqreturn_t sh_rtc_periodic(int irq, void *dev_id)
+static int __sh_rtc_periodic(struct sh_rtc *rtc)
{
- struct sh_rtc *rtc = dev_id;
struct rtc_device *rtc_dev = rtc->rtc_dev;
- unsigned int tmp;
-
- spin_lock(&rtc->lock);
+ struct rtc_task *irq_task;
+ unsigned int tmp, pending;
tmp = readb(rtc->regbase + RCR2);
+ pending = tmp & RCR2_PEF;
tmp &= ~RCR2_PEF;
writeb(tmp, rtc->regbase + RCR2);
+ if (!pending)
+ return 0;
+
/* Half period enabled than one skipped and the next notified */
if ((rtc->periodic_freq & PF_HP) && (rtc->periodic_freq & PF_COUNT))
rtc->periodic_freq &= ~PF_COUNT;
rtc->periodic_freq |= PF_COUNT;
if (rtc->periodic_freq & PF_KOU) {
spin_lock(&rtc_dev->irq_task_lock);
- if (rtc_dev->irq_task)
- rtc_dev->irq_task->func(rtc_dev->irq_task->private_data);
+ irq_task = rtc_dev->irq_task;
+ if (irq_task)
+ irq_task->func(irq_task->private_data);
spin_unlock(&rtc_dev->irq_task_lock);
} else
rtc_update_irq(rtc->rtc_dev, 1, RTC_PF | RTC_IRQF);
}
+ return pending;
+}
+
+static irqreturn_t sh_rtc_interrupt(int irq, void *dev_id)
+{
+ struct sh_rtc *rtc = dev_id;
+ int ret;
+
+ spin_lock(&rtc->lock);
+ ret = __sh_rtc_interrupt(rtc);
+ spin_unlock(&rtc->lock);
+
+ return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_alarm(int irq, void *dev_id)
+{
+ struct sh_rtc *rtc = dev_id;
+ int ret;
+
+ spin_lock(&rtc->lock);
+ ret = __sh_rtc_alarm(rtc);
+ spin_unlock(&rtc->lock);
+
+ return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_periodic(int irq, void *dev_id)
+{
+ struct sh_rtc *rtc = dev_id;
+ int ret;
+
+ spin_lock(&rtc->lock);
+ ret = __sh_rtc_periodic(rtc);
spin_unlock(&rtc->lock);
- return IRQ_HANDLED;
+ return IRQ_RETVAL(ret);
+}
+
+static irqreturn_t sh_rtc_shared(int irq, void *dev_id)
+{
+ struct sh_rtc *rtc = dev_id;
+ int ret;
+
+ spin_lock(&rtc->lock);
+ ret = __sh_rtc_interrupt(rtc);
+ ret |= __sh_rtc_alarm(rtc);
+ ret |= __sh_rtc_periodic(rtc);
+ spin_unlock(&rtc->lock);
+
+ return IRQ_RETVAL(ret);
}
static inline void sh_rtc_setpie(struct device *dev, unsigned int enable)
return 0;
}
+static inline void sh_rtc_setcie(struct device *dev, unsigned int enable)
+{
+ struct sh_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int tmp;
+
+ spin_lock_irq(&rtc->lock);
+
+ tmp = readb(rtc->regbase + RCR1);
+
+ if (!enable)
+ tmp &= ~RCR1_CIE;
+ else
+ tmp |= RCR1_CIE;
+
+ writeb(tmp, rtc->regbase + RCR1);
+
+ spin_unlock_irq(&rtc->lock);
+}
+
static int sh_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct sh_rtc *rtc = dev_get_drvdata(dev);
break;
case RTC_UIE_OFF:
rtc->periodic_freq &= ~PF_OXS;
+ sh_rtc_setcie(dev, 0);
break;
case RTC_UIE_ON:
rtc->periodic_freq |= PF_OXS;
+ sh_rtc_setcie(dev, 1);
break;
case RTC_IRQP_READ:
ret = put_user(rtc->rtc_dev->irq_freq,
tm->tm_sec--;
#endif
+ /* only keep the carry interrupt enabled if UIE is on */
+ if (!(rtc->periodic_freq & PF_OXS))
+ sh_rtc_setcie(dev, 0);
+
dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon + 1, tm->tm_year, tm->tm_wday);
- if (rtc_valid_tm(tm) < 0) {
- dev_err(dev, "invalid date\n");
- rtc_time_to_tm(0, tm);
- }
-
- return 0;
+ return rtc_valid_tm(tm);
}
static int sh_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
struct sh_rtc *rtc;
struct resource *res;
- unsigned int tmp;
+ struct rtc_time r;
int ret;
rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
ret = platform_get_irq(pdev, 0);
if (unlikely(ret <= 0)) {
ret = -ENOENT;
- dev_err(&pdev->dev, "No IRQ for period\n");
+ dev_err(&pdev->dev, "No IRQ resource\n");
goto err_badres;
}
rtc->periodic_irq = ret;
-
- ret = platform_get_irq(pdev, 1);
- if (unlikely(ret <= 0)) {
- ret = -ENOENT;
- dev_err(&pdev->dev, "No IRQ for carry\n");
- goto err_badres;
- }
- rtc->carry_irq = ret;
-
- ret = platform_get_irq(pdev, 2);
- if (unlikely(ret <= 0)) {
- ret = -ENOENT;
- dev_err(&pdev->dev, "No IRQ for alarm\n");
- goto err_badres;
- }
- rtc->alarm_irq = ret;
+ rtc->carry_irq = platform_get_irq(pdev, 1);
+ rtc->alarm_irq = platform_get_irq(pdev, 2);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (unlikely(res == NULL)) {
}
rtc->rtc_dev->max_user_freq = 256;
- rtc->rtc_dev->irq_freq = 1;
- rtc->periodic_freq = 0x60;
platform_set_drvdata(pdev, rtc);
- /* register periodic/carry/alarm irqs */
- ret = request_irq(rtc->periodic_irq, sh_rtc_periodic, IRQF_DISABLED,
- "sh-rtc period", rtc);
- if (unlikely(ret)) {
- dev_err(&pdev->dev,
- "request period IRQ failed with %d, IRQ %d\n", ret,
- rtc->periodic_irq);
- goto err_unmap;
- }
+ if (rtc->carry_irq <= 0) {
+ /* register shared periodic/carry/alarm irq */
+ ret = request_irq(rtc->periodic_irq, sh_rtc_shared,
+ IRQF_DISABLED, "sh-rtc", rtc);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev,
+ "request IRQ failed with %d, IRQ %d\n", ret,
+ rtc->periodic_irq);
+ goto err_unmap;
+ }
+ } else {
+ /* register periodic/carry/alarm irqs */
+ ret = request_irq(rtc->periodic_irq, sh_rtc_periodic,
+ IRQF_DISABLED, "sh-rtc period", rtc);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev,
+ "request period IRQ failed with %d, IRQ %d\n",
+ ret, rtc->periodic_irq);
+ goto err_unmap;
+ }
- ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
- "sh-rtc carry", rtc);
- if (unlikely(ret)) {
- dev_err(&pdev->dev,
- "request carry IRQ failed with %d, IRQ %d\n", ret,
- rtc->carry_irq);
- free_irq(rtc->periodic_irq, rtc);
- goto err_unmap;
- }
+ ret = request_irq(rtc->carry_irq, sh_rtc_interrupt,
+ IRQF_DISABLED, "sh-rtc carry", rtc);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev,
+ "request carry IRQ failed with %d, IRQ %d\n",
+ ret, rtc->carry_irq);
+ free_irq(rtc->periodic_irq, rtc);
+ goto err_unmap;
+ }
- ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
- "sh-rtc alarm", rtc);
- if (unlikely(ret)) {
- dev_err(&pdev->dev,
- "request alarm IRQ failed with %d, IRQ %d\n", ret,
- rtc->alarm_irq);
- free_irq(rtc->carry_irq, rtc);
- free_irq(rtc->periodic_irq, rtc);
- goto err_unmap;
+ ret = request_irq(rtc->alarm_irq, sh_rtc_alarm,
+ IRQF_DISABLED, "sh-rtc alarm", rtc);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev,
+ "request alarm IRQ failed with %d, IRQ %d\n",
+ ret, rtc->alarm_irq);
+ free_irq(rtc->carry_irq, rtc);
+ free_irq(rtc->periodic_irq, rtc);
+ goto err_unmap;
+ }
}
- tmp = readb(rtc->regbase + RCR1);
- tmp &= ~RCR1_CF;
- tmp |= RCR1_CIE;
- writeb(tmp, rtc->regbase + RCR1);
+ /* everything disabled by default */
+ rtc->periodic_freq = 0;
+ rtc->rtc_dev->irq_freq = 0;
+ sh_rtc_setpie(&pdev->dev, 0);
+ sh_rtc_setaie(&pdev->dev, 0);
+ sh_rtc_setcie(&pdev->dev, 0);
+
+ /* reset rtc to epoch 0 if time is invalid */
+ if (rtc_read_time(rtc->rtc_dev, &r) < 0) {
+ rtc_time_to_tm(0, &r);
+ rtc_set_time(rtc->rtc_dev, &r);
+ }
+ device_init_wakeup(&pdev->dev, 1);
return 0;
err_unmap:
sh_rtc_setpie(&pdev->dev, 0);
sh_rtc_setaie(&pdev->dev, 0);
+ sh_rtc_setcie(&pdev->dev, 0);
- free_irq(rtc->carry_irq, rtc);
free_irq(rtc->periodic_irq, rtc);
- free_irq(rtc->alarm_irq, rtc);
+ if (rtc->carry_irq > 0) {
+ free_irq(rtc->carry_irq, rtc);
+ free_irq(rtc->alarm_irq, rtc);
+ }
release_resource(rtc->res);
} while (!(status & SCxSR_TDxE(port)));
sci_in(port, SCxSR); /* Dummy read */
- sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ sci_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
sci_out(port, SCxTDR, c);
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
static inline void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
static inline int scif_txroom(struct uart_port *port)
{
return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff);
unsigned count)
{
struct uart_port *port = &serial_console_port->port;
+ unsigned short bits;
int i;
for (i = 0; i < count; i++) {
sci_poll_put_char(port, *s++);
}
+
+ /* wait until fifo is empty and last bit has been transmitted */
+ bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
+ while ((sci_in(port, SCxSR) & bits) != bits)
+ cpu_relax();
}
static int __init serial_console_setup(struct console *co, char *options)
#include <linux/serial_core.h>
#include <asm/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
# define SCSPTR1 0xffe10024 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* Overrun error bit */
# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
# define SCSPTR0 0xffea0024 /* 16 bit SCIF */
# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */
# define SCSPTR2 0xffec0024 /* 16 bit SCIF */
defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786) || \
defined(CONFIG_CPU_SUBTYPE_SHX3)
#define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */
#else
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16)
SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffea0000)
*/
#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
- defined(CONFIG_CPU_SUBTYPE_SH7785)
+ defined(CONFIG_CPU_SUBTYPE_SH7785) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
if (!data[0] && data[1])
primary = 1;
+ if (!data[0] && !data[1])
+ pr_warning("intc: missing unique irq mask for "
+ "irq %d (vect 0x%04x)\n", irq, irq2evt(irq));
+
data[0] = data[0] ? data[0] : intc_mask_data(desc, d, enum_id, 1);
data[1] = data[1] ? data[1] : intc_prio_data(desc, d, enum_id, 1);
return 0;
}
+static unsigned char *intc_evt2irq_table;
+
+unsigned int intc_evt2irq(unsigned int vector)
+{
+ unsigned int irq = evt2irq(vector);
+
+ if (intc_evt2irq_table && intc_evt2irq_table[irq])
+ irq = intc_evt2irq_table[irq];
+
+ return irq;
+}
void __init register_intc_controller(struct intc_desc *desc)
{
BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+ /* keep the first vector only if same enum is used multiple times */
+ for (i = 0; i < desc->nr_vectors; i++) {
+ struct intc_vect *vect = desc->vectors + i;
+ int first_irq = evt2irq(vect->vect);
+
+ if (!vect->enum_id)
+ continue;
+
+ for (k = i + 1; k < desc->nr_vectors; k++) {
+ struct intc_vect *vect2 = desc->vectors + k;
+
+ if (vect->enum_id != vect2->enum_id)
+ continue;
+
+ vect2->enum_id = 0;
+
+ if (!intc_evt2irq_table)
+ intc_evt2irq_table = alloc_bootmem(NR_IRQS);
+
+ if (!intc_evt2irq_table) {
+ pr_warning("intc: cannot allocate evt2irq!\n");
+ continue;
+ }
+
+ intc_evt2irq_table[evt2irq(vect2->vect)] = first_irq;
+ }
+ }
+
+ /* register the vectors one by one */
for (i = 0; i < desc->nr_vectors; i++) {
struct intc_vect *vect = desc->vectors + i;
+ if (!vect->enum_id)
+ continue;
+
intc_register_irq(desc, d, vect->enum_id, evt2irq(vect->vect));
}
}
/*
* Core maple bus functionality
*
- * Copyright (C) 2007, 2008 Adrian McMenamin
+ * Copyright (C) 2007 - 2009 Adrian McMenamin
* Copyright (C) 2001 - 2008 Paul Mundt
- *
- * Based on 2.4 code by:
- *
- * Copyright (C) 2000-2001 YAEGASHI Takeshi
+ * Copyright (C) 2000 - 2001 YAEGASHI Takeshi
* Copyright (C) 2001 M. R. Brown
- * Copyright (C) 2001 Paul Mundt
- *
- * and others.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <mach/dma.h>
#include <mach/sysasic.h>
-MODULE_AUTHOR("Yaegashi Takeshi, Paul Mundt, M. R. Brown, Adrian McMenamin");
+MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>");
MODULE_DESCRIPTION("Maple bus driver for Dreamcast");
MODULE_LICENSE("GPL v2");
MODULE_SUPPORTED_DEVICE("{{SEGA, Dreamcast/Maple}}");
/* mutex to protect queue of waiting packets */
static DEFINE_MUTEX(maple_wlist_lock);
-static struct maple_driver maple_dummy_driver;
+static struct maple_driver maple_unsupported_device;
static struct device maple_bus;
static int subdevice_map[MAPLE_PORTS];
static unsigned long *maple_sendbuf, *maple_sendptr, *maple_lastptr;
int unit;
};
-static bool checked[4];
-static struct maple_device *baseunits[4];
+static bool checked[MAPLE_PORTS];
+static bool empty[MAPLE_PORTS];
+static struct maple_device *baseunits[MAPLE_PORTS];
/**
* maple_driver_register - register a maple driver
EXPORT_SYMBOL_GPL(maple_driver_unregister);
/* set hardware registers to enable next round of dma */
-static void maplebus_dma_reset(void)
+static void maple_dma_reset(void)
{
ctrl_outl(MAPLE_MAGIC, MAPLE_RESET);
/* set trig type to 0 for software trigger, 1 for hardware (VBLANK) */
ctrl_outl(1, MAPLE_TRIGTYPE);
- ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(50000), MAPLE_SPEED);
+ /*
+ * Maple system register
+ * bits 31 - 16 timeout in units of 20nsec
+ * bit 12 hard trigger - set 0 to keep responding to VBLANK
+ * bits 9 - 8 set 00 for 2 Mbps, 01 for 1 Mbps
+ * bits 3 - 0 delay (in 1.3ms) between VBLANK and start of DMA
+ * max delay is 11
+ */
+ ctrl_outl(MAPLE_2MBPS | MAPLE_TIMEOUT(0xFFFF), MAPLE_SPEED);
ctrl_outl(PHYSADDR(maple_sendbuf), MAPLE_DMAADDR);
ctrl_outl(1, MAPLE_ENABLE);
}
{
struct maple_device *mdev;
struct mapleq *mq;
- if (!dev)
- return;
+
mdev = to_maple_dev(dev);
mq = mdev->mq;
- if (mq) {
- if (mq->recvbufdcsp)
- kmem_cache_free(maple_queue_cache, mq->recvbufdcsp);
- kfree(mq);
- mq = NULL;
- }
+ kmem_cache_free(maple_queue_cache, mq->recvbuf);
+ kfree(mq);
kfree(mdev);
}
/**
- * maple_add_packet - add a single instruction to the queue
+ * maple_add_packet - add a single instruction to the maple bus queue
* @mdev: maple device
* @function: function on device being queried
* @command: maple command to add
int maple_add_packet(struct maple_device *mdev, u32 function, u32 command,
size_t length, void *data)
{
- int locking, ret = 0;
- void *sendbuf = NULL;
-
- mutex_lock(&maple_wlist_lock);
- /* bounce if device already locked */
- locking = mutex_is_locked(&mdev->mq->mutex);
- if (locking) {
- ret = -EBUSY;
- goto out;
- }
-
- mutex_lock(&mdev->mq->mutex);
-
- if (length) {
- sendbuf = kmalloc(length * 4, GFP_KERNEL);
- if (!sendbuf) {
- mutex_unlock(&mdev->mq->mutex);
- ret = -ENOMEM;
- goto out;
- }
- ((__be32 *)sendbuf)[0] = cpu_to_be32(function);
- }
-
- mdev->mq->command = command;
- mdev->mq->length = length;
- if (length > 1)
- memcpy(sendbuf + 4, data, (length - 1) * 4);
- mdev->mq->sendbuf = sendbuf;
-
- list_add(&mdev->mq->list, &maple_waitq);
-out:
- mutex_unlock(&maple_wlist_lock);
- return ret;
-}
-EXPORT_SYMBOL_GPL(maple_add_packet);
-
-/**
- * maple_add_packet_sleeps - add a single instruction to the queue
- * @mdev: maple device
- * @function: function on device being queried
- * @command: maple command to add
- * @length: length of command string (in 32 bit words)
- * @data: remainder of command string
- *
- * Same as maple_add_packet(), but waits for the lock to become free.
- */
-int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
- u32 command, size_t length, void *data)
-{
- int locking, ret = 0;
+ int ret = 0;
void *sendbuf = NULL;
- locking = mutex_lock_interruptible(&mdev->mq->mutex);
- if (locking) {
- ret = -EIO;
- goto out;
- }
-
if (length) {
- sendbuf = kmalloc(length * 4, GFP_KERNEL);
+ sendbuf = kzalloc(length * 4, GFP_KERNEL);
if (!sendbuf) {
- mutex_unlock(&mdev->mq->mutex);
ret = -ENOMEM;
goto out;
}
mdev->mq->sendbuf = sendbuf;
mutex_lock(&maple_wlist_lock);
- list_add(&mdev->mq->list, &maple_waitq);
+ list_add_tail(&mdev->mq->list, &maple_waitq);
mutex_unlock(&maple_wlist_lock);
out:
return ret;
}
-EXPORT_SYMBOL_GPL(maple_add_packet_sleeps);
+EXPORT_SYMBOL_GPL(maple_add_packet);
static struct mapleq *maple_allocq(struct maple_device *mdev)
{
struct mapleq *mq;
- mq = kmalloc(sizeof(*mq), GFP_KERNEL);
+ mq = kzalloc(sizeof(*mq), GFP_KERNEL);
if (!mq)
goto failed_nomem;
+ INIT_LIST_HEAD(&mq->list);
mq->dev = mdev;
- mq->recvbufdcsp = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
- mq->recvbuf = (void *) P2SEGADDR(mq->recvbufdcsp);
+ mq->recvbuf = kmem_cache_zalloc(maple_queue_cache, GFP_KERNEL);
if (!mq->recvbuf)
goto failed_p2;
- /*
- * most devices do not need the mutex - but
- * anything that injects block reads or writes
- * will rely on it
- */
- mutex_init(&mq->mutex);
+ mq->recvbuf->buf = &((mq->recvbuf->bufx)[0]);
return mq;
failed_p2:
kfree(mq);
failed_nomem:
+ dev_err(&mdev->dev, "could not allocate memory for device (%d, %d)\n",
+ mdev->port, mdev->unit);
return NULL;
}
{
struct maple_device *mdev;
+ /* zero this out to avoid kobj subsystem
+ * thinking it has already been registered */
+
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
if (!mdev)
return NULL;
mdev->port = port;
mdev->unit = unit;
+
mdev->mq = maple_allocq(mdev);
if (!mdev->mq) {
}
mdev->dev.bus = &maple_bus_type;
mdev->dev.parent = &maple_bus;
+ init_waitqueue_head(&mdev->maple_wait);
return mdev;
}
static void maple_free_dev(struct maple_device *mdev)
{
- if (!mdev)
- return;
- if (mdev->mq) {
- if (mdev->mq->recvbufdcsp)
- kmem_cache_free(maple_queue_cache,
- mdev->mq->recvbufdcsp);
- kfree(mdev->mq);
- }
+ kmem_cache_free(maple_queue_cache, mdev->mq->recvbuf);
+ kfree(mdev->mq);
kfree(mdev);
}
maple_lastptr = maple_sendptr;
*maple_sendptr++ = (port << 16) | len | 0x80000000;
- *maple_sendptr++ = PHYSADDR(mq->recvbuf);
+ *maple_sendptr++ = PHYSADDR(mq->recvbuf->buf);
*maple_sendptr++ =
mq->command | (to << 8) | (from << 16) | (len << 24);
while (len-- > 0)
int i, maple_packets = 0;
struct mapleq *mq, *nmq;
- if (!list_empty(&maple_sentq))
+ if (!maple_dma_done())
return;
+
+ /* disable DMA */
+ ctrl_outl(0, MAPLE_ENABLE);
+
+ if (!list_empty(&maple_sentq))
+ goto finish;
+
mutex_lock(&maple_wlist_lock);
- if (list_empty(&maple_waitq) || !maple_dma_done()) {
+ if (list_empty(&maple_waitq)) {
mutex_unlock(&maple_wlist_lock);
- return;
+ goto finish;
}
- mutex_unlock(&maple_wlist_lock);
+
maple_lastptr = maple_sendbuf;
maple_sendptr = maple_sendbuf;
- mutex_lock(&maple_wlist_lock);
+
list_for_each_entry_safe(mq, nmq, &maple_waitq, list) {
maple_build_block(mq);
- list_move(&mq->list, &maple_sentq);
+ list_del_init(&mq->list);
+ list_add_tail(&mq->list, &maple_sentq);
if (maple_packets++ > MAPLE_MAXPACKETS)
break;
}
dma_cache_sync(0, maple_sendbuf + i * PAGE_SIZE,
PAGE_SIZE, DMA_BIDIRECTIONAL);
}
+
+finish:
+ maple_dma_reset();
}
/* check if there is a driver registered likely to match this device */
-static int check_matching_maple_driver(struct device_driver *driver,
+static int maple_check_matching_driver(struct device_driver *driver,
void *devptr)
{
struct maple_driver *maple_drv;
static void maple_detach_driver(struct maple_device *mdev)
{
- if (!mdev)
- return;
device_unregister(&mdev->dev);
- mdev = NULL;
}
/* process initial MAPLE_COMMAND_DEVINFO for each device or port */
{
char *p, *recvbuf;
unsigned long function;
- int matched, retval;
+ int matched, error;
- recvbuf = mdev->mq->recvbuf;
+ recvbuf = mdev->mq->recvbuf->buf;
/* copy the data as individual elements in
* case of memory optimisation */
memcpy(&mdev->devinfo.function, recvbuf + 4, 4);
memcpy(&mdev->devinfo.area_code, recvbuf + 20, 1);
memcpy(&mdev->devinfo.connector_direction, recvbuf + 21, 1);
memcpy(&mdev->devinfo.product_name[0], recvbuf + 22, 30);
- memcpy(&mdev->devinfo.product_licence[0], recvbuf + 52, 60);
memcpy(&mdev->devinfo.standby_power, recvbuf + 112, 2);
memcpy(&mdev->devinfo.max_power, recvbuf + 114, 2);
memcpy(mdev->product_name, mdev->devinfo.product_name, 30);
else
break;
- printk(KERN_INFO "Maple device detected: %s\n",
- mdev->product_name);
- printk(KERN_INFO "Maple device: %s\n", mdev->product_licence);
-
function = be32_to_cpu(mdev->devinfo.function);
+ dev_info(&mdev->dev, "detected %s: function 0x%lX: at (%d, %d)\n",
+ mdev->product_name, function, mdev->port, mdev->unit);
+
if (function > 0x200) {
/* Do this silently - as not a real device */
function = 0;
- mdev->driver = &maple_dummy_driver;
- sprintf(mdev->dev.bus_id, "%d:0.port", mdev->port);
+ mdev->driver = &maple_unsupported_device;
+ dev_set_name(&mdev->dev, "%d:0.port", mdev->port);
} else {
- printk(KERN_INFO
- "Maple bus at (%d, %d): Function 0x%lX\n",
- mdev->port, mdev->unit, function);
-
matched =
bus_for_each_drv(&maple_bus_type, NULL, mdev,
- check_matching_maple_driver);
+ maple_check_matching_driver);
if (matched == 0) {
/* Driver does not exist yet */
- printk(KERN_INFO
- "No maple driver found.\n");
- mdev->driver = &maple_dummy_driver;
+ dev_info(&mdev->dev, "no driver found\n");
+ mdev->driver = &maple_unsupported_device;
}
- sprintf(mdev->dev.bus_id, "%d:0%d.%lX", mdev->port,
- mdev->unit, function);
+
+ dev_set_name(&mdev->dev, "%d:0%d.%lX", mdev->port,
+ mdev->unit, function);
}
+
mdev->function = function;
mdev->dev.release = &maple_release_device;
- retval = device_register(&mdev->dev);
- if (retval) {
- printk(KERN_INFO
- "Maple bus: Attempt to register device"
- " (%x, %x) failed.\n",
- mdev->port, mdev->unit);
+
+ atomic_set(&mdev->busy, 0);
+ error = device_register(&mdev->dev);
+ if (error) {
+ dev_warn(&mdev->dev, "could not register device at"
+ " (%d, %d), with error 0x%X\n", mdev->unit,
+ mdev->port, error);
maple_free_dev(mdev);
mdev = NULL;
return;
* port and unit then return 1 - allows identification
* of which devices need to be attached or detached
*/
-static int detach_maple_device(struct device *device, void *portptr)
+static int check_maple_device(struct device *device, void *portptr)
{
struct maple_device_specify *ds;
struct maple_device *mdev;
static int setup_maple_commands(struct device *device, void *ignored)
{
int add;
- struct maple_device *maple_dev = to_maple_dev(device);
-
- if ((maple_dev->interval > 0)
- && time_after(jiffies, maple_dev->when)) {
- /* bounce if we cannot lock */
- add = maple_add_packet(maple_dev,
- be32_to_cpu(maple_dev->devinfo.function),
+ struct maple_device *mdev = to_maple_dev(device);
+ if (mdev->interval > 0 && atomic_read(&mdev->busy) == 0 &&
+ time_after(jiffies, mdev->when)) {
+ /* bounce if we cannot add */
+ add = maple_add_packet(mdev,
+ be32_to_cpu(mdev->devinfo.function),
MAPLE_COMMAND_GETCOND, 1, NULL);
if (!add)
- maple_dev->when = jiffies + maple_dev->interval;
+ mdev->when = jiffies + mdev->interval;
} else {
if (time_after(jiffies, maple_pnp_time))
- /* This will also bounce */
- maple_add_packet(maple_dev, 0,
- MAPLE_COMMAND_DEVINFO, 0, NULL);
+ /* Ensure we don't have block reads and devinfo
+ * calls interfering with one another - so flag the
+ * device as busy */
+ if (atomic_read(&mdev->busy) == 0) {
+ atomic_set(&mdev->busy, 1);
+ maple_add_packet(mdev, 0,
+ MAPLE_COMMAND_DEVINFO, 0, NULL);
+ }
}
return 0;
}
/* VBLANK bottom half - implemented via workqueue */
static void maple_vblank_handler(struct work_struct *work)
{
- if (!list_empty(&maple_sentq) || !maple_dma_done())
+ int x, locking;
+ struct maple_device *mdev;
+
+ if (!maple_dma_done())
return;
ctrl_outl(0, MAPLE_ENABLE);
+ if (!list_empty(&maple_sentq))
+ goto finish;
+
+ /*
+ * Set up essential commands - to fetch data and
+ * check devices are still present
+ */
bus_for_each_dev(&maple_bus_type, NULL, NULL,
- setup_maple_commands);
+ setup_maple_commands);
+
+ if (time_after(jiffies, maple_pnp_time)) {
+ /*
+ * Scan the empty ports - bus is flakey and may have
+ * mis-reported emptyness
+ */
+ for (x = 0; x < MAPLE_PORTS; x++) {
+ if (checked[x] && empty[x]) {
+ mdev = baseunits[x];
+ if (!mdev)
+ break;
+ atomic_set(&mdev->busy, 1);
+ locking = maple_add_packet(mdev, 0,
+ MAPLE_COMMAND_DEVINFO, 0, NULL);
+ if (!locking)
+ break;
+ }
+ }
- if (time_after(jiffies, maple_pnp_time))
maple_pnp_time = jiffies + MAPLE_PNP_INTERVAL;
-
- mutex_lock(&maple_wlist_lock);
- if (!list_empty(&maple_waitq) && list_empty(&maple_sentq)) {
- mutex_unlock(&maple_wlist_lock);
- maple_send();
- } else {
- mutex_unlock(&maple_wlist_lock);
}
- maplebus_dma_reset();
+finish:
+ maple_send();
}
-/* handle devices added via hotplugs - placing them on queue for DEVINFO*/
+/* handle devices added via hotplugs - placing them on queue for DEVINFO */
static void maple_map_subunits(struct maple_device *mdev, int submask)
{
int retval, k, devcheck;
ds.unit = k + 1;
retval =
bus_for_each_dev(&maple_bus_type, NULL, &ds,
- detach_maple_device);
+ check_maple_device);
if (retval) {
submask = submask >> 1;
continue;
mdev_add = maple_alloc_dev(mdev->port, k + 1);
if (!mdev_add)
return;
+ atomic_set(&mdev_add->busy, 1);
maple_add_packet(mdev_add, 0, MAPLE_COMMAND_DEVINFO,
0, NULL);
/* mark that we are checking sub devices */
}
/* handle empty port or hotplug removal */
-static void maple_response_none(struct maple_device *mdev,
- struct mapleq *mq)
-{
- if (mdev->unit != 0) {
- list_del(&mq->list);
- maple_clean_submap(mdev);
- printk(KERN_INFO
- "Maple bus device detaching at (%d, %d)\n",
- mdev->port, mdev->unit);
+static void maple_response_none(struct maple_device *mdev)
+{
+ maple_clean_submap(mdev);
+
+ if (likely(mdev->unit != 0)) {
+ /*
+ * Block devices play up
+ * and give the impression they have
+ * been removed even when still in place or
+ * trip the mtd layer when they have
+ * really gone - this code traps that eventuality
+ * and ensures we aren't overloaded with useless
+ * error messages
+ */
+ if (mdev->can_unload) {
+ if (!mdev->can_unload(mdev)) {
+ atomic_set(&mdev->busy, 2);
+ wake_up(&mdev->maple_wait);
+ return;
+ }
+ }
+
+ dev_info(&mdev->dev, "detaching device at (%d, %d)\n",
+ mdev->port, mdev->unit);
maple_detach_driver(mdev);
return;
- }
- if (!started || !fullscan) {
- if (checked[mdev->port] == false) {
- checked[mdev->port] = true;
- printk(KERN_INFO "No maple devices attached"
- " to port %d\n", mdev->port);
+ } else {
+ if (!started || !fullscan) {
+ if (checked[mdev->port] == false) {
+ checked[mdev->port] = true;
+ empty[mdev->port] = true;
+ dev_info(&mdev->dev, "no devices"
+ " to port %d\n", mdev->port);
+ }
+ return;
}
- return;
}
- maple_clean_submap(mdev);
+ /* Some hardware devices generate false detach messages on unit 0 */
+ atomic_set(&mdev->busy, 0);
}
/* preprocess hotplugs or scans */
} else {
if (mdev->unit != 0)
maple_attach_driver(mdev);
+ if (mdev->unit == 0) {
+ empty[mdev->port] = false;
+ maple_attach_driver(mdev);
+ }
}
- return;
}
if (mdev->unit == 0) {
submask = recvbuf[2] & 0x1F;
}
}
+static void maple_response_fileerr(struct maple_device *mdev, void *recvbuf)
+{
+ if (mdev->fileerr_handler) {
+ mdev->fileerr_handler(mdev, recvbuf);
+ return;
+ } else
+ dev_warn(&mdev->dev, "device at (%d, %d) reports"
+ "file error 0x%X\n", mdev->port, mdev->unit,
+ ((int *)recvbuf)[1]);
+}
+
static void maple_port_rescan(void)
{
int i;
if (checked[i] == false) {
fullscan = 0;
mdev = baseunits[i];
- /*
- * test lock in case scan has failed
- * but device is still locked
- */
- if (mutex_is_locked(&mdev->mq->mutex))
- mutex_unlock(&mdev->mq->mutex);
maple_add_packet(mdev, 0, MAPLE_COMMAND_DEVINFO,
0, NULL);
}
static void maple_dma_handler(struct work_struct *work)
{
struct mapleq *mq, *nmq;
- struct maple_device *dev;
+ struct maple_device *mdev;
char *recvbuf;
enum maple_code code;
ctrl_outl(0, MAPLE_ENABLE);
if (!list_empty(&maple_sentq)) {
list_for_each_entry_safe(mq, nmq, &maple_sentq, list) {
- recvbuf = mq->recvbuf;
+ mdev = mq->dev;
+ recvbuf = mq->recvbuf->buf;
+ dma_cache_sync(&mdev->dev, recvbuf, 0x400,
+ DMA_FROM_DEVICE);
code = recvbuf[0];
- dev = mq->dev;
kfree(mq->sendbuf);
- mutex_unlock(&mq->mutex);
list_del_init(&mq->list);
-
switch (code) {
case MAPLE_RESPONSE_NONE:
- maple_response_none(dev, mq);
+ maple_response_none(mdev);
break;
case MAPLE_RESPONSE_DEVINFO:
- maple_response_devinfo(dev, recvbuf);
+ maple_response_devinfo(mdev, recvbuf);
+ atomic_set(&mdev->busy, 0);
break;
case MAPLE_RESPONSE_DATATRF:
- if (dev->callback)
- dev->callback(mq);
+ if (mdev->callback)
+ mdev->callback(mq);
+ atomic_set(&mdev->busy, 0);
+ wake_up(&mdev->maple_wait);
break;
case MAPLE_RESPONSE_FILEERR:
+ maple_response_fileerr(mdev, recvbuf);
+ atomic_set(&mdev->busy, 0);
+ wake_up(&mdev->maple_wait);
+ break;
+
case MAPLE_RESPONSE_AGAIN:
case MAPLE_RESPONSE_BADCMD:
case MAPLE_RESPONSE_BADFUNC:
- printk(KERN_DEBUG
- "Maple non-fatal error 0x%X\n",
- code);
+ dev_warn(&mdev->dev, "non-fatal error"
+ " 0x%X at (%d, %d)\n", code,
+ mdev->port, mdev->unit);
+ atomic_set(&mdev->busy, 0);
break;
case MAPLE_RESPONSE_ALLINFO:
- printk(KERN_DEBUG
- "Maple - extended device information"
- " not supported\n");
+ dev_notice(&mdev->dev, "extended"
+ " device information request for (%d, %d)"
+ " but call is not supported\n", mdev->port,
+ mdev->unit);
+ atomic_set(&mdev->busy, 0);
break;
case MAPLE_RESPONSE_OK:
+ atomic_set(&mdev->busy, 0);
+ wake_up(&mdev->maple_wait);
break;
default:
if (!fullscan)
maple_port_rescan();
/* mark that we have been through the first scan */
- if (started == 0)
- started = 1;
+ started = 1;
}
- maplebus_dma_reset();
+ maple_send();
}
-static irqreturn_t maplebus_dma_interrupt(int irq, void *dev_id)
+static irqreturn_t maple_dma_interrupt(int irq, void *dev_id)
{
/* Load everything into the bottom half */
schedule_work(&maple_dma_process);
return IRQ_HANDLED;
}
-static irqreturn_t maplebus_vblank_interrupt(int irq, void *dev_id)
+static irqreturn_t maple_vblank_interrupt(int irq, void *dev_id)
{
schedule_work(&maple_vblank_process);
return IRQ_HANDLED;
static int maple_set_dma_interrupt_handler(void)
{
- return request_irq(HW_EVENT_MAPLE_DMA, maplebus_dma_interrupt,
- IRQF_SHARED, "maple bus DMA", &maple_dummy_driver);
+ return request_irq(HW_EVENT_MAPLE_DMA, maple_dma_interrupt,
+ IRQF_SHARED, "maple bus DMA", &maple_unsupported_device);
}
static int maple_set_vblank_interrupt_handler(void)
{
- return request_irq(HW_EVENT_VSYNC, maplebus_vblank_interrupt,
- IRQF_SHARED, "maple bus VBLANK", &maple_dummy_driver);
+ return request_irq(HW_EVENT_VSYNC, maple_vblank_interrupt,
+ IRQF_SHARED, "maple bus VBLANK", &maple_unsupported_device);
}
static int maple_get_dma_buffer(void)
return 0;
}
-static int match_maple_bus_driver(struct device *devptr,
+static int maple_match_bus_driver(struct device *devptr,
struct device_driver *drvptr)
{
struct maple_driver *maple_drv = to_maple_driver(drvptr);
{
}
-static struct maple_driver maple_dummy_driver = {
+static struct maple_driver maple_unsupported_device = {
.drv = {
- .name = "maple_dummy_driver",
+ .name = "maple_unsupported_device",
.bus = &maple_bus_type,
},
};
-
+/**
+ * maple_bus_type - core maple bus structure
+ */
struct bus_type maple_bus_type = {
.name = "maple",
- .match = match_maple_bus_driver,
+ .match = maple_match_bus_driver,
.uevent = maple_bus_uevent,
};
EXPORT_SYMBOL_GPL(maple_bus_type);
static struct device maple_bus = {
- .bus_id = "maple",
+ .init_name = "maple",
.release = maple_bus_release,
};
{
int retval, i;
struct maple_device *mdev[MAPLE_PORTS];
- ctrl_outl(0, MAPLE_STATE);
+
+ ctrl_outl(0, MAPLE_ENABLE);
retval = device_register(&maple_bus);
if (retval)
if (retval)
goto cleanup_device;
- retval = driver_register(&maple_dummy_driver.drv);
+ retval = driver_register(&maple_unsupported_device.drv);
if (retval)
goto cleanup_bus;
/* allocate memory for maple bus dma */
retval = maple_get_dma_buffer();
if (retval) {
- printk(KERN_INFO
- "Maple bus: Failed to allocate Maple DMA buffers\n");
+ dev_err(&maple_bus, "failed to allocate DMA buffers\n");
goto cleanup_basic;
}
/* set up DMA interrupt handler */
retval = maple_set_dma_interrupt_handler();
if (retval) {
- printk(KERN_INFO
- "Maple bus: Failed to grab maple DMA IRQ\n");
+ dev_err(&maple_bus, "bus failed to grab maple "
+ "DMA IRQ\n");
goto cleanup_dma;
}
/* set up VBLANK interrupt handler */
retval = maple_set_vblank_interrupt_handler();
if (retval) {
- printk(KERN_INFO "Maple bus: Failed to grab VBLANK IRQ\n");
+ dev_err(&maple_bus, "bus failed to grab VBLANK IRQ\n");
goto cleanup_irq;
}
- maple_queue_cache =
- kmem_cache_create("maple_queue_cache", 0x400, 0,
- SLAB_HWCACHE_ALIGN, NULL);
+ maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
if (!maple_queue_cache)
goto cleanup_bothirqs;
/* setup maple ports */
for (i = 0; i < MAPLE_PORTS; i++) {
checked[i] = false;
+ empty[i] = false;
mdev[i] = maple_alloc_dev(i, 0);
- baseunits[i] = mdev[i];
if (!mdev[i]) {
while (i-- > 0)
maple_free_dev(mdev[i]);
goto cleanup_cache;
}
+ baseunits[i] = mdev[i];
+ atomic_set(&mdev[i]->busy, 1);
maple_add_packet(mdev[i], 0, MAPLE_COMMAND_DEVINFO, 0, NULL);
subdevice_map[i] = 0;
}
- /* setup maplebus hardware */
- maplebus_dma_reset();
- /* initial detection */
+ maple_pnp_time = jiffies + HZ;
+ /* prepare initial queue */
maple_send();
- maple_pnp_time = jiffies;
- printk(KERN_INFO "Maple bus core now registered.\n");
+ dev_info(&maple_bus, "bus core now registered\n");
return 0;
free_pages((unsigned long) maple_sendbuf, MAPLE_DMA_PAGES);
cleanup_basic:
- driver_unregister(&maple_dummy_driver.drv);
+ driver_unregister(&maple_unsupported_device.drv);
cleanup_bus:
bus_unregister(&maple_bus_type);
device_unregister(&maple_bus);
cleanup:
- printk(KERN_INFO "Maple bus registration failed\n");
+ printk(KERN_ERR "Maple bus registration failed\n");
return retval;
}
/* Push init to later to ensure hardware gets detected */
static int superhyway_devices;
static struct device superhyway_bus_device = {
- .bus_id = "superhyway",
+ .init_name = "superhyway",
};
static void superhyway_device_release(struct device *dev)
dev->id.id = dev->vcr.mod_id;
sprintf(dev->name, "SuperHyway device %04x", dev->id.id);
- sprintf(dev->dev.bus_id, "%02x", superhyway_devices);
+ dev_set_name(&dev->dev, "%02x", superhyway_devices);
superhyway_devices++;
default y if CPU_SUBTYPE_SH7720
default y if CPU_SUBTYPE_SH7721
default y if CPU_SUBTYPE_SH7763
+ default y if CPU_SUBTYPE_SH7786
# more:
default PCI
#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_CPU_SUBTYPE_SH7763)
+ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7786)
#include "ohci-sh.c"
#define PLATFORM_DRIVER ohci_hcd_sh_driver
#endif
#include <mach-dreamcast/mach/sysasic.h>
#endif
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
#include <linux/pagemap.h>
#include <mach/dma.h>
#include <asm/dma.h>
static unsigned long pvr2fb_map;
#endif
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
static unsigned int shdma = PVR2_CASCADE_CHAN;
static unsigned int pvr2dma = ONCHIP_NR_DMA_CHANNELS;
#endif
static int pvr2_init_cable(void);
static int pvr2_get_param(const struct pvr2_params *p, const char *s,
int val, int size);
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
static ssize_t pvr2fb_write(struct fb_info *info, const char *buf,
size_t count, loff_t *ppos);
#endif
.fb_blank = pvr2fb_blank,
.fb_check_var = pvr2fb_check_var,
.fb_set_par = pvr2fb_set_par,
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
.fb_write = pvr2fb_write,
#endif
.fb_fillrect = cfb_fillrect,
return cable_type;
}
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
static ssize_t pvr2fb_write(struct fb_info *info, const char *buf,
size_t count, loff_t *ppos)
{
return ret;
}
-#endif /* CONFIG_SH_DMA */
+#endif /* CONFIG_PVR2_DMA */
/**
* pvr2fb_common_init
return -EBUSY;
}
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
if (request_dma(pvr2dma, "pvr2") != 0) {
free_irq(HW_EVENT_VSYNC, 0);
return -EBUSY;
}
free_irq(HW_EVENT_VSYNC, 0);
-#ifdef CONFIG_SH_DMA
+#ifdef CONFIG_PVR2_DMA
free_dma(pvr2dma);
#endif
}
struct fb_info info;
dma_addr_t dma_handle;
struct fb_deferred_io defio;
+ unsigned long frame_end;
+ wait_queue_head_t frame_end_wait;
};
struct sh_mobile_lcdc_priv {
static irqreturn_t sh_mobile_lcdc_irq(int irq, void *data)
{
struct sh_mobile_lcdc_priv *priv = data;
+ struct sh_mobile_lcdc_chan *ch;
unsigned long tmp;
+ int is_sub;
+ int k;
/* acknowledge interrupt */
tmp = lcdc_read(priv, _LDINTR);
tmp |= 0x000000ff ^ LDINTR_FS; /* status in low 8 */
lcdc_write(priv, _LDINTR, tmp);
- /* disable clocks */
- sh_mobile_lcdc_clk_off(priv);
+ /* figure out if this interrupt is for main or sub lcd */
+ is_sub = (lcdc_read(priv, _LDSR) & (1 << 10)) ? 1 : 0;
+
+ /* wake up channel and disable clocks*/
+ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+ ch = &priv->ch[k];
+
+ if (!ch->enabled)
+ continue;
+
+ if (is_sub == lcdc_chan_is_sublcd(ch)) {
+ ch->frame_end = 1;
+ wake_up(&ch->frame_end_wait);
+
+ sh_mobile_lcdc_clk_off(priv);
+ }
+ }
+
return IRQ_HANDLED;
}
struct sh_mobile_lcdc_board_cfg *board_cfg;
int k;
- /* tell the board code to disable the panel */
+ /* clean up deferred io and ask board code to disable panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
ch = &priv->ch[k];
- board_cfg = &ch->cfg.board_cfg;
- if (board_cfg->display_off)
- board_cfg->display_off(board_cfg->board_data);
- /* cleanup deferred io if enabled */
+ /* deferred io mode:
+ * flush frame, and wait for frame end interrupt
+ * clean up deferred io and enable clock
+ */
if (ch->info.fbdefio) {
+ ch->frame_end = 0;
+ schedule_delayed_work(&ch->info.deferred_work, 0);
+ wait_event(ch->frame_end_wait, ch->frame_end);
fb_deferred_io_cleanup(&ch->info);
ch->info.fbdefio = NULL;
+ sh_mobile_lcdc_clk_on(priv);
}
+
+ board_cfg = &ch->cfg.board_cfg;
+ if (board_cfg->display_off)
+ board_cfg->display_off(board_cfg->board_data);
+
}
/* stop the lcdc */
return 0;
}
+static int sh_mobile_lcdc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ sh_mobile_lcdc_stop(platform_get_drvdata(pdev));
+ return 0;
+}
+
+static int sh_mobile_lcdc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return sh_mobile_lcdc_start(platform_get_drvdata(pdev));
+}
+
+static struct dev_pm_ops sh_mobile_lcdc_dev_pm_ops = {
+ .suspend = sh_mobile_lcdc_suspend,
+ .resume = sh_mobile_lcdc_resume,
+};
+
static int sh_mobile_lcdc_remove(struct platform_device *pdev);
static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "unsupported interface type\n");
goto err1;
}
+ init_waitqueue_head(&priv->ch[i].frame_end_wait);
switch (pdata->ch[i].chan) {
case LCDC_CHAN_MAINLCD:
.driver = {
.name = "sh_mobile_lcdc_fb",
.owner = THIS_MODULE,
+ .pm = &sh_mobile_lcdc_dev_pm_ops,
},
.probe = sh_mobile_lcdc_probe,
.remove = sh_mobile_lcdc_remove,
/* Maple Bus command and response codes */
enum maple_code {
- MAPLE_RESPONSE_FILEERR = -5,
- MAPLE_RESPONSE_AGAIN = -4, /* request should be retransmitted */
- MAPLE_RESPONSE_BADCMD = -3,
- MAPLE_RESPONSE_BADFUNC = -2,
- MAPLE_RESPONSE_NONE = -1, /* unit didn't respond at all */
- MAPLE_COMMAND_DEVINFO = 1,
- MAPLE_COMMAND_ALLINFO = 2,
- MAPLE_COMMAND_RESET = 3,
- MAPLE_COMMAND_KILL = 4,
- MAPLE_RESPONSE_DEVINFO = 5,
- MAPLE_RESPONSE_ALLINFO = 6,
- MAPLE_RESPONSE_OK = 7,
- MAPLE_RESPONSE_DATATRF = 8,
- MAPLE_COMMAND_GETCOND = 9,
- MAPLE_COMMAND_GETMINFO = 10,
- MAPLE_COMMAND_BREAD = 11,
- MAPLE_COMMAND_BWRITE = 12,
- MAPLE_COMMAND_SETCOND = 14
+ MAPLE_RESPONSE_FILEERR = -5,
+ MAPLE_RESPONSE_AGAIN, /* retransmit */
+ MAPLE_RESPONSE_BADCMD,
+ MAPLE_RESPONSE_BADFUNC,
+ MAPLE_RESPONSE_NONE, /* unit didn't respond*/
+ MAPLE_COMMAND_DEVINFO = 1,
+ MAPLE_COMMAND_ALLINFO,
+ MAPLE_COMMAND_RESET,
+ MAPLE_COMMAND_KILL,
+ MAPLE_RESPONSE_DEVINFO,
+ MAPLE_RESPONSE_ALLINFO,
+ MAPLE_RESPONSE_OK,
+ MAPLE_RESPONSE_DATATRF,
+ MAPLE_COMMAND_GETCOND,
+ MAPLE_COMMAND_GETMINFO,
+ MAPLE_COMMAND_BREAD,
+ MAPLE_COMMAND_BWRITE,
+ MAPLE_COMMAND_BSYNC,
+ MAPLE_COMMAND_SETCOND,
+ MAPLE_COMMAND_MICCONTROL
+};
+
+enum maple_file_errors {
+ MAPLE_FILEERR_INVALID_PARTITION = 0x01000000,
+ MAPLE_FILEERR_PHASE_ERROR = 0x02000000,
+ MAPLE_FILEERR_INVALID_BLOCK = 0x04000000,
+ MAPLE_FILEERR_WRITE_ERROR = 0x08000000,
+ MAPLE_FILEERR_INVALID_WRITE_LENGTH = 0x10000000,
+ MAPLE_FILEERR_BAD_CRC = 0x20000000
+};
+
+struct maple_buffer {
+ char bufx[0x400];
+ void *buf;
};
struct mapleq {
struct list_head list;
struct maple_device *dev;
- void *sendbuf, *recvbuf, *recvbufdcsp;
+ struct maple_buffer *recvbuf;
+ void *sendbuf, *recvbuf_p2;
unsigned char length;
enum maple_code command;
- struct mutex mutex;
};
struct maple_devinfo {
struct maple_driver *driver;
struct mapleq *mq;
void (*callback) (struct mapleq * mq);
+ void (*fileerr_handler)(struct maple_device *mdev, void *recvbuf);
+ int (*can_unload)(struct maple_device *mdev);
unsigned long when, interval, function;
struct maple_devinfo devinfo;
unsigned char port, unit;
char product_name[32];
char product_licence[64];
+ atomic_t busy;
+ wait_queue_head_t maple_wait;
struct device dev;
};
int maple_driver_register(struct maple_driver *);
void maple_driver_unregister(struct maple_driver *);
-int maple_add_packet_sleeps(struct maple_device *mdev, u32 function,
+int maple_add_packet(struct maple_device *mdev, u32 function,
u32 command, u32 length, void *data);
void maple_clear_dev(struct maple_device *mdev);
--- /dev/null
+#ifndef __SH_CMT_H__
+#define __SH_CMT_H__
+
+struct sh_cmt_config {
+ char *name;
+ unsigned long channel_offset;
+ int timer_bit;
+ char *clk;
+ unsigned long clockevent_rating;
+ unsigned long clocksource_rating;
+};
+
+#endif /* __SH_CMT_H__ */
}
#endif
+unsigned int intc_evt2irq(unsigned int vector);
void __init register_intc_controller(struct intc_desc *desc);
int intc_set_priority(unsigned int irq, unsigned int prio);
tristate "Dreamcast Yamaha AICA sound"
depends on SH_DREAMCAST
select SND_PCM
+ select G2_DMA
help
ALSA Sound driver for the SEGA Dreamcast console.
projects / linux-2.6-omap-h63xx.git / commitdiff