USB: Put phidgets driver in a sysfs class

This patch creates a device class phidget and add the phidget drivers to
them.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 8affc137d618c5fe87f8e8eedcd444fdf50fc53c..20539cf9394b17c5cbf8208ab99bc8c9e0d1dc97 100644 (file)
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -115,9 +115,16 @@ config USB_CYTHERM
          To compile this driver as a module, choose M here: the
          module will be called cytherm.
 
+config USB_PHIDGET
+       tristate "USB Phidgets drivers"
+       depends on USB
+       help
+         Say Y here to enable the various drivers for devices from
+         Phidgets inc.
+
 config USB_PHIDGETKIT
        tristate "USB PhidgetInterfaceKit support"
-       depends on USB
+       depends on USB_PHIDGET
        help
          Say Y here if you want to connect a PhidgetInterfaceKit USB device
          from Phidgets Inc.
@@ -127,7 +134,7 @@ config USB_PHIDGETKIT
 
 config USB_PHIDGETMOTORCONTROL
        tristate "USB PhidgetMotorControl support"
-       depends on USB
+       depends on USB_PHIDGET
        help
          Say Y here if you want to connect a PhidgetMotorControl USB device
          from Phidgets Inc.
@@ -137,7 +144,7 @@ config USB_PHIDGETMOTORCONTROL
 
 config USB_PHIDGETSERVO
        tristate "USB PhidgetServo support"
-       depends on USB
+       depends on USB_PHIDGET
        help
          Say Y here if you want to connect an 1 or 4 Motor PhidgetServo 
          servo controller version 2.0 or 3.0.

diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 5f329176451a1c4c656bd8e98dffa2706d30a4c7..d12a84a1c0a4ba915295e25f1b88458e5bd4fdea 100644 (file)
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_USB_LCD)         += usblcd.o
 obj-$(CONFIG_USB_LD)           += ldusb.o
 obj-$(CONFIG_USB_LED)          += usbled.o
 obj-$(CONFIG_USB_LEGOTOWER)    += legousbtower.o
+obj-$(CONFIG_USB_PHIDGET)      += phidget.o
 obj-$(CONFIG_USB_PHIDGETKIT)   += phidgetkit.o
 obj-$(CONFIG_USB_PHIDGETMOTORCONTROL)  += phidgetmotorcontrol.o
 obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o

diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c
new file mode 100644 (file)
index 0000000..735ed33
--- /dev/null
+++ b/drivers/usb/misc/phidget.c
@@ -0,0 +1,43 @@
+/*
+ * USB Phidgets class
+ *
+ * Copyright (C) 2006  Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/device.h>
+
+struct class *phidget_class;
+
+static int __init init_phidget(void)
+{
+       phidget_class = class_create(THIS_MODULE, "phidget");
+
+       if (IS_ERR(phidget_class))
+               return PTR_ERR(phidget_class);
+
+       return 0;
+}
+
+static void __exit cleanup_phidget(void)
+{
+       class_destroy(phidget_class);
+}
+
+EXPORT_SYMBOL_GPL(phidget_class);
+
+module_init(init_phidget);
+module_exit(cleanup_phidget);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sean Young <sean@mess.org>");
+MODULE_DESCRIPTION("Container module for phidget class");
+

diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h
new file mode 100644 (file)
index 0000000..c401190
--- /dev/null
+++ b/drivers/usb/misc/phidget.h
@@ -0,0 +1,12 @@
+/*
+ * USB Phidgets class
+ *
+ * Copyright (C) 2006  Sean Young <sean@mess.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+extern struct class *phidget_class;

diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index bfbbbfbb92bcca4ef3b56fe8aea5241ef057ca7b..3f508957def915e590a9eb4313db6b44ff537da3 100644 (file)
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -20,6 +20,8 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 
+#include "phidget.h"
+
 #define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
 #define DRIVER_DESC "USB PhidgetInterfaceKit Driver"
 
@@ -57,11 +59,15 @@ ifkit(8, 8, 4, 0);
 ifkit(0, 8, 8, 1);
 ifkit(0, 16, 16, 0);
 
+static unsigned long device_no;
+
 struct interfacekit {
        struct usb_device *udev;
        struct usb_interface *intf;
        struct driver_interfacekit *ifkit;
+       struct device *dev;
        unsigned long outputs;
+       int dev_no;
        u8 inputs[MAX_INTERFACES];
        u16 sensors[MAX_INTERFACES];
        u8 lcd_files_on;
@@ -180,21 +186,21 @@ exit:
 }
 
 #define set_lcd_line(number)   \
-static ssize_t lcd_line_##number(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)     \
-{                                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);                             \
-       struct interfacekit *kit = usb_get_intfdata(intf);                              \
-       change_string(kit, buf, number - 1);                                            \
-       return count;                                                                   \
-}                                                                                      \
+static ssize_t lcd_line_##number(struct device *dev,                   \
+                                       struct device_attribute *attr,  \
+                                       const char *buf, size_t count)  \
+{                                                                      \
+       struct interfacekit *kit = dev_get_drvdata(dev);                \
+       change_string(kit, buf, number - 1);                            \
+       return count;                                                   \
+}                                                                      \
 static DEVICE_ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number);
 set_lcd_line(1);
 set_lcd_line(2);
 
 static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-       struct usb_interface *intf = to_usb_interface(dev);
-       struct interfacekit *kit = usb_get_intfdata(intf);
+       struct interfacekit *kit = dev_get_drvdata(dev);
        int enabled;
        unsigned char *buffer;
        int retval = -ENOMEM;
@@ -232,16 +238,15 @@ static void remove_lcd_files(struct interfacekit *kit)
 {
        if (kit->lcd_files_on) {
                dev_dbg(&kit->udev->dev, "Removing lcd files\n");
-               device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_1);
-               device_remove_file(&kit->intf->dev, &dev_attr_lcd_line_2);
-               device_remove_file(&kit->intf->dev, &dev_attr_backlight);
+               device_remove_file(kit->dev, &dev_attr_lcd_line_1);
+               device_remove_file(kit->dev, &dev_attr_lcd_line_2);
+               device_remove_file(kit->dev, &dev_attr_backlight);
        }
 }
 
 static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
-       struct usb_interface *intf = to_usb_interface(dev);
-       struct interfacekit *kit = usb_get_intfdata(intf);
+       struct interfacekit *kit = dev_get_drvdata(dev);
        int enable;
        
        if (kit->ifkit->has_lcd == 0)
@@ -253,9 +258,9 @@ static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *att
        if (enable) {
                if (!kit->lcd_files_on) {
                        dev_dbg(&kit->udev->dev, "Adding lcd files\n");
-                       device_create_file(&kit->intf->dev, &dev_attr_lcd_line_1);
-                       device_create_file(&kit->intf->dev, &dev_attr_lcd_line_2);
-                       device_create_file(&kit->intf->dev, &dev_attr_backlight);
+                       device_create_file(kit->dev, &dev_attr_lcd_line_1);
+                       device_create_file(kit->dev, &dev_attr_lcd_line_2);
+                       device_create_file(kit->dev, &dev_attr_backlight);
                        kit->lcd_files_on = 1;
                }
        } else {
@@ -362,24 +367,24 @@ static void do_notify(void *data)
        for (i=0; i<kit->ifkit->inputs; i++) {
                if (test_and_clear_bit(i, &kit->input_events)) {
                        sprintf(sysfs_file, "input%d", i + 1);
-                       sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file);
+                       sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
                }
        }
 
        for (i=0; i<kit->ifkit->sensors; i++) {
                if (test_and_clear_bit(i, &kit->sensor_events)) {
                        sprintf(sysfs_file, "sensor%d", i + 1);
-                       sysfs_notify(&kit->intf->dev.kobj, NULL, sysfs_file);
+                       sysfs_notify(&kit->dev->kobj, NULL, sysfs_file);
                }
        }
 }
 
 #define show_set_output(value)         \
-static ssize_t set_output##value(struct device *dev, struct device_attribute *attr, const char *buf,   \
-                                                       size_t count)   \
+static ssize_t set_output##value(struct device *dev,                   \
+                                       struct device_attribute *attr,  \
+                                       const char *buf, size_t count)  \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct interfacekit *kit = usb_get_intfdata(intf);              \
+       struct interfacekit *kit = dev_get_drvdata(dev);                \
        int enabled;                                                    \
        int retval;                                                     \
                                                                        \
@@ -391,10 +396,11 @@ static ssize_t set_output##value(struct device *dev, struct device_attribute *at
        return retval ? retval : count;                                 \
 }                                                                      \
                                                                        \
-static ssize_t show_output##value(struct device *dev, struct device_attribute *attr, char *buf)        \
+static ssize_t show_output##value(struct device *dev,                  \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct interfacekit *kit = usb_get_intfdata(intf);              \
+       struct interfacekit *kit = dev_get_drvdata(dev);                \
                                                                        \
        return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\
 }                                                                      \
@@ -420,8 +426,7 @@ show_set_output(16);
 #define show_input(value)      \
 static ssize_t show_input##value(struct device *dev, struct device_attribute *attr, char *buf) \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct interfacekit *kit = usb_get_intfdata(intf);              \
+       struct interfacekit *kit = dev_get_drvdata(dev);                \
                                                                        \
        return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]);       \
 }                                                                      \
@@ -445,10 +450,11 @@ show_input(15);
 show_input(16);
 
 #define show_sensor(value)     \
-static ssize_t show_sensor##value(struct device *dev, struct device_attribute *attr, char *buf)        \
+static ssize_t show_sensor##value(struct device *dev,                  \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct interfacekit *kit = usb_get_intfdata(intf);              \
+       struct interfacekit *kit = dev_get_drvdata(dev);                \
                                                                        \
        return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]);      \
 }                                                                      \
@@ -471,6 +477,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic
        struct interfacekit *kit;
        struct driver_interfacekit *ifkit;
        int pipe, maxp, rc = -ENOMEM;
+       int bit, value;
 
        ifkit = (struct driver_interfacekit *)id->driver_info;
        if (!ifkit)
@@ -493,6 +500,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic
        if (!kit)
                goto out;
 
+       kit->dev_no = -1;
        kit->ifkit = ifkit;
        kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &kit->data_dma);
        if (!kit->data)
@@ -513,73 +521,88 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic
 
        usb_set_intfdata(intf, kit);
 
+        do {
+                bit = find_first_zero_bit(&device_no, sizeof(device_no));
+                value = test_and_set_bit(bit, &device_no);
+        } while(value);
+        kit->dev_no = bit;
+
+        kit->dev = device_create(phidget_class, &kit->udev->dev, 0,
+                               "interfacekit%d", kit->dev_no);
+        if (IS_ERR(kit->dev)) {
+                rc = PTR_ERR(kit->dev);
+                kit->dev = NULL;
+                goto out;
+        }
+       dev_set_drvdata(kit->dev, kit);
+
        if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
                rc = -EIO;
                goto out;
        }
 
        if (ifkit->outputs >= 4) {
-               device_create_file(&intf->dev, &dev_attr_output1);
-               device_create_file(&intf->dev, &dev_attr_output2);
-               device_create_file(&intf->dev, &dev_attr_output3);
-               device_create_file(&intf->dev, &dev_attr_output4);
+               device_create_file(kit->dev, &dev_attr_output1);
+               device_create_file(kit->dev, &dev_attr_output2);
+               device_create_file(kit->dev, &dev_attr_output3);
+               device_create_file(kit->dev, &dev_attr_output4);
        }
        if (ifkit->outputs >= 8) {
-               device_create_file(&intf->dev, &dev_attr_output5);
-               device_create_file(&intf->dev, &dev_attr_output6);
-               device_create_file(&intf->dev, &dev_attr_output7);
-               device_create_file(&intf->dev, &dev_attr_output8);
+               device_create_file(kit->dev, &dev_attr_output5);
+               device_create_file(kit->dev, &dev_attr_output6);
+               device_create_file(kit->dev, &dev_attr_output7);
+               device_create_file(kit->dev, &dev_attr_output8);
        } 
        if (ifkit->outputs == 16) {
-               device_create_file(&intf->dev, &dev_attr_output9);
-               device_create_file(&intf->dev, &dev_attr_output10);
-               device_create_file(&intf->dev, &dev_attr_output11);
-               device_create_file(&intf->dev, &dev_attr_output12);
-               device_create_file(&intf->dev, &dev_attr_output13);
-               device_create_file(&intf->dev, &dev_attr_output14);
-               device_create_file(&intf->dev, &dev_attr_output15);
-               device_create_file(&intf->dev, &dev_attr_output16);
+               device_create_file(kit->dev, &dev_attr_output9);
+               device_create_file(kit->dev, &dev_attr_output10);
+               device_create_file(kit->dev, &dev_attr_output11);
+               device_create_file(kit->dev, &dev_attr_output12);
+               device_create_file(kit->dev, &dev_attr_output13);
+               device_create_file(kit->dev, &dev_attr_output14);
+               device_create_file(kit->dev, &dev_attr_output15);
+               device_create_file(kit->dev, &dev_attr_output16);
        }
 
        if (ifkit->inputs >= 4) {
-               device_create_file(&intf->dev, &dev_attr_input1);
-               device_create_file(&intf->dev, &dev_attr_input2);
-               device_create_file(&intf->dev, &dev_attr_input3);
-               device_create_file(&intf->dev, &dev_attr_input4);
+               device_create_file(kit->dev, &dev_attr_input1);
+               device_create_file(kit->dev, &dev_attr_input2);
+               device_create_file(kit->dev, &dev_attr_input3);
+               device_create_file(kit->dev, &dev_attr_input4);
        }
        if (ifkit->inputs >= 8) {
-               device_create_file(&intf->dev, &dev_attr_input5);
-               device_create_file(&intf->dev, &dev_attr_input6);
-               device_create_file(&intf->dev, &dev_attr_input7);
-               device_create_file(&intf->dev, &dev_attr_input8);
+               device_create_file(kit->dev, &dev_attr_input5);
+               device_create_file(kit->dev, &dev_attr_input6);
+               device_create_file(kit->dev, &dev_attr_input7);
+               device_create_file(kit->dev, &dev_attr_input8);
        }
        if (ifkit->inputs == 16) {
-               device_create_file(&intf->dev, &dev_attr_input9);
-               device_create_file(&intf->dev, &dev_attr_input10);
-               device_create_file(&intf->dev, &dev_attr_input11);
-               device_create_file(&intf->dev, &dev_attr_input12);
-               device_create_file(&intf->dev, &dev_attr_input13);
-               device_create_file(&intf->dev, &dev_attr_input14);
-               device_create_file(&intf->dev, &dev_attr_input15);
-               device_create_file(&intf->dev, &dev_attr_input16);
+               device_create_file(kit->dev, &dev_attr_input9);
+               device_create_file(kit->dev, &dev_attr_input10);
+               device_create_file(kit->dev, &dev_attr_input11);
+               device_create_file(kit->dev, &dev_attr_input12);
+               device_create_file(kit->dev, &dev_attr_input13);
+               device_create_file(kit->dev, &dev_attr_input14);
+               device_create_file(kit->dev, &dev_attr_input15);
+               device_create_file(kit->dev, &dev_attr_input16);
        }
 
        if (ifkit->sensors >= 4) {
-               device_create_file(&intf->dev, &dev_attr_sensor1);
-               device_create_file(&intf->dev, &dev_attr_sensor2);
-               device_create_file(&intf->dev, &dev_attr_sensor3);
-               device_create_file(&intf->dev, &dev_attr_sensor4);
+               device_create_file(kit->dev, &dev_attr_sensor1);
+               device_create_file(kit->dev, &dev_attr_sensor2);
+               device_create_file(kit->dev, &dev_attr_sensor3);
+               device_create_file(kit->dev, &dev_attr_sensor4);
        }
        if (ifkit->sensors >= 7) {
-               device_create_file(&intf->dev, &dev_attr_sensor5);
-               device_create_file(&intf->dev, &dev_attr_sensor6);
-               device_create_file(&intf->dev, &dev_attr_sensor7);
+               device_create_file(kit->dev, &dev_attr_sensor5);
+               device_create_file(kit->dev, &dev_attr_sensor6);
+               device_create_file(kit->dev, &dev_attr_sensor7);
        }
        if (ifkit->sensors == 8)
-               device_create_file(&intf->dev, &dev_attr_sensor8);
+               device_create_file(kit->dev, &dev_attr_sensor8);
 
        if (ifkit->has_lcd)
-               device_create_file(&intf->dev, &dev_attr_lcd);
+               device_create_file(kit->dev, &dev_attr_lcd);
 
        dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n",
                        ifkit->sensors, ifkit->inputs, ifkit->outputs);
@@ -592,6 +615,11 @@ out:
                        usb_free_urb(kit->irq);
                if (kit->data)
                        usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
+               if (kit->dev)
+                       device_unregister(kit->dev);
+               if (kit->dev_no >= 0)
+                       clear_bit(kit->dev_no, &device_no);
+
                kfree(kit);
        }
 
@@ -614,72 +642,76 @@ static void interfacekit_disconnect(struct usb_interface *interface)
        cancel_delayed_work(&kit->do_notify);
 
        if (kit->ifkit->outputs >= 4) {
-               device_remove_file(&interface->dev, &dev_attr_output1);
-               device_remove_file(&interface->dev, &dev_attr_output2);
-               device_remove_file(&interface->dev, &dev_attr_output3);
-               device_remove_file(&interface->dev, &dev_attr_output4);
+               device_remove_file(kit->dev, &dev_attr_output1);
+               device_remove_file(kit->dev, &dev_attr_output2);
+               device_remove_file(kit->dev, &dev_attr_output3);
+               device_remove_file(kit->dev, &dev_attr_output4);
        }
        if (kit->ifkit->outputs >= 8) {
-               device_remove_file(&interface->dev, &dev_attr_output5);
-               device_remove_file(&interface->dev, &dev_attr_output6);
-               device_remove_file(&interface->dev, &dev_attr_output7);
-               device_remove_file(&interface->dev, &dev_attr_output8);
+               device_remove_file(kit->dev, &dev_attr_output5);
+               device_remove_file(kit->dev, &dev_attr_output6);
+               device_remove_file(kit->dev, &dev_attr_output7);
+               device_remove_file(kit->dev, &dev_attr_output8);
        }
        if (kit->ifkit->outputs == 16) {
-               device_remove_file(&interface->dev, &dev_attr_output9);
-               device_remove_file(&interface->dev, &dev_attr_output10);
-               device_remove_file(&interface->dev, &dev_attr_output11);
-               device_remove_file(&interface->dev, &dev_attr_output12);
-               device_remove_file(&interface->dev, &dev_attr_output13);
-               device_remove_file(&interface->dev, &dev_attr_output14);
-               device_remove_file(&interface->dev, &dev_attr_output15);
-               device_remove_file(&interface->dev, &dev_attr_output16);
+               device_remove_file(kit->dev, &dev_attr_output9);
+               device_remove_file(kit->dev, &dev_attr_output10);
+               device_remove_file(kit->dev, &dev_attr_output11);
+               device_remove_file(kit->dev, &dev_attr_output12);
+               device_remove_file(kit->dev, &dev_attr_output13);
+               device_remove_file(kit->dev, &dev_attr_output14);
+               device_remove_file(kit->dev, &dev_attr_output15);
+               device_remove_file(kit->dev, &dev_attr_output16);
        }
 
        if (kit->ifkit->inputs >= 4) {
-               device_remove_file(&interface->dev, &dev_attr_input1);
-               device_remove_file(&interface->dev, &dev_attr_input2);
-               device_remove_file(&interface->dev, &dev_attr_input3);
-               device_remove_file(&interface->dev, &dev_attr_input4);
+               device_remove_file(kit->dev, &dev_attr_input1);
+               device_remove_file(kit->dev, &dev_attr_input2);
+               device_remove_file(kit->dev, &dev_attr_input3);
+               device_remove_file(kit->dev, &dev_attr_input4);
        }
        if (kit->ifkit->inputs >= 8) {
-               device_remove_file(&interface->dev, &dev_attr_input5);
-               device_remove_file(&interface->dev, &dev_attr_input6);
-               device_remove_file(&interface->dev, &dev_attr_input7);
-               device_remove_file(&interface->dev, &dev_attr_input8);
+               device_remove_file(kit->dev, &dev_attr_input5);
+               device_remove_file(kit->dev, &dev_attr_input6);
+               device_remove_file(kit->dev, &dev_attr_input7);
+               device_remove_file(kit->dev, &dev_attr_input8);
        }
        if (kit->ifkit->inputs == 16) {
-               device_remove_file(&interface->dev, &dev_attr_input9);
-               device_remove_file(&interface->dev, &dev_attr_input10);
-               device_remove_file(&interface->dev, &dev_attr_input11);
-               device_remove_file(&interface->dev, &dev_attr_input12);
-               device_remove_file(&interface->dev, &dev_attr_input13);
-               device_remove_file(&interface->dev, &dev_attr_input14);
-               device_remove_file(&interface->dev, &dev_attr_input15);
-               device_remove_file(&interface->dev, &dev_attr_input16);
+               device_remove_file(kit->dev, &dev_attr_input9);
+               device_remove_file(kit->dev, &dev_attr_input10);
+               device_remove_file(kit->dev, &dev_attr_input11);
+               device_remove_file(kit->dev, &dev_attr_input12);
+               device_remove_file(kit->dev, &dev_attr_input13);
+               device_remove_file(kit->dev, &dev_attr_input14);
+               device_remove_file(kit->dev, &dev_attr_input15);
+               device_remove_file(kit->dev, &dev_attr_input16);
        }
 
        if (kit->ifkit->sensors >= 4) {
-               device_remove_file(&interface->dev, &dev_attr_sensor1);
-               device_remove_file(&interface->dev, &dev_attr_sensor2);
-               device_remove_file(&interface->dev, &dev_attr_sensor3);
-               device_remove_file(&interface->dev, &dev_attr_sensor4);
+               device_remove_file(kit->dev, &dev_attr_sensor1);
+               device_remove_file(kit->dev, &dev_attr_sensor2);
+               device_remove_file(kit->dev, &dev_attr_sensor3);
+               device_remove_file(kit->dev, &dev_attr_sensor4);
        }
        if (kit->ifkit->sensors >= 7) {
-               device_remove_file(&interface->dev, &dev_attr_sensor5);
-               device_remove_file(&interface->dev, &dev_attr_sensor6);
-               device_remove_file(&interface->dev, &dev_attr_sensor7);
+               device_remove_file(kit->dev, &dev_attr_sensor5);
+               device_remove_file(kit->dev, &dev_attr_sensor6);
+               device_remove_file(kit->dev, &dev_attr_sensor7);
        }
        if (kit->ifkit->sensors == 8)
-               device_remove_file(&interface->dev, &dev_attr_sensor8);
+               device_remove_file(kit->dev, &dev_attr_sensor8);
 
        if (kit->ifkit->has_lcd)
-               device_remove_file(&interface->dev, &dev_attr_lcd);
+               device_remove_file(kit->dev, &dev_attr_lcd);
+
+       device_unregister(kit->dev);
 
        dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n",
                kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs);
 
        usb_put_dev(kit->udev);
+       clear_bit(kit->dev_no, &device_no);
+
        kfree(kit);
 }
 

diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
index 2972dc2eb27f0c88c94ff2f7451b1b3f083f9e90..d9ac7f97f8c898b959e6702e1994ab795716ff4a 100644 (file)
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -15,6 +15,8 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 
+#include "phidget.h"
+
 #define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
 #define DRIVER_DESC "USB PhidgetMotorControl Driver"
 
@@ -23,9 +25,13 @@
 
 #define URB_INT_SIZE                   8
 
+static unsigned long device_no;
+
 struct motorcontrol {
        struct usb_device *udev;
        struct usb_interface *intf;
+       struct device *dev;
+       int dev_no;
        u8 inputs[4];
        s8 desired_speed[2];
        s8 speed[2];
@@ -162,14 +168,14 @@ static void do_notify(void *data)
        for (i=0; i<4; i++) {
                if (test_and_clear_bit(i, &mc->input_events)) {
                        sprintf(sysfs_file, "input%d", i);
-                       sysfs_notify(&mc->intf->dev.kobj, NULL, sysfs_file);
+                       sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
                }
        }
 
        for (i=0; i<2; i++) {
                if (test_and_clear_bit(i, &mc->speed_events)) {
                        sprintf(sysfs_file, "speed%d", i);
-                       sysfs_notify(&mc->intf->dev.kobj, NULL, sysfs_file);
+                       sysfs_notify(&mc->dev->kobj, NULL, sysfs_file);
                }
        }
 
@@ -181,11 +187,11 @@ static void do_notify(void *data)
 }
 
 #define show_set_speed(value)          \
-static ssize_t set_speed##value(struct device *dev,                    \
-       struct device_attribute *attr, const char *buf, size_t count)   \
+static ssize_t set_speed##value(struct device *dev,                    \
+                                       struct device_attribute *attr,  \
+                                       const char *buf, size_t count)  \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
        int speed;                                                      \
        int retval;                                                     \
                                                                        \
@@ -202,11 +208,11 @@ static ssize_t set_speed##value(struct device *dev,                       \
        return retval ? retval : count;                                 \
 }                                                                      \
                                                                        \
-static ssize_t show_speed##value(struct device *dev,                   \
-                       struct device_attribute *attr, char *buf)       \
+static ssize_t show_speed##value(struct device *dev,                   \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
                                                                        \
        return sprintf(buf, "%d\n", mc->speed[value]);                  \
 }                                                                      \
@@ -217,10 +223,10 @@ show_set_speed(1);
 
 #define show_set_acceleration(value)           \
 static ssize_t set_acceleration##value(struct device *dev,             \
-       struct device_attribute *attr, const char *buf, size_t count)   \
+                                       struct device_attribute *attr,  \
+                                       const char *buf, size_t count)  \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
        int acceleration;                                               \
        int retval;                                                     \
                                                                        \
@@ -237,11 +243,11 @@ static ssize_t set_acceleration##value(struct device *dev,                \
        return retval ? retval : count;                                 \
 }                                                                      \
                                                                        \
-static ssize_t show_acceleration##value(struct device *dev,            \
-                       struct device_attribute *attr, char *buf)       \
+static ssize_t show_acceleration##value(struct device *dev,            \
+                                       struct device_attribute *attr,  \
+                                                       char *buf)      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
                                                                        \
        return sprintf(buf, "%d\n", mc->acceleration[value]);           \
 }                                                                      \
@@ -251,11 +257,11 @@ show_set_acceleration(0);
 show_set_acceleration(1);
 
 #define show_current(value)    \
-static ssize_t show_current##value(struct device *dev,                         \
-                       struct device_attribute *attr, char *buf)       \
+static ssize_t show_current##value(struct device *dev,                 \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
                                                                        \
        return sprintf(buf, "%dmA\n", (int)mc->_current[value]);        \
 }                                                                      \
@@ -265,11 +271,11 @@ show_current(0);
 show_current(1);
 
 #define show_input(value)      \
-static ssize_t show_input##value(struct device *dev,                   \
-                       struct device_attribute *attr, char *buf)       \
+static ssize_t show_input##value(struct device *dev,                   \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface(dev);             \
-       struct motorcontrol *mc = usb_get_intfdata(intf);               \
+       struct motorcontrol *mc = dev_get_drvdata(dev);                 \
                                                                        \
        return sprintf(buf, "%d\n", (int)mc->inputs[value]);            \
 }                                                                      \
@@ -287,6 +293,7 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic
        struct usb_endpoint_descriptor *endpoint;
        struct motorcontrol *mc;
        int pipe, maxp, rc = -ENOMEM;
+       int bit, value;
 
        interface = intf->cur_altsetting;
        if (interface->desc.bNumEndpoints != 1)
@@ -306,6 +313,7 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic
        if (!mc)
                goto out;
 
+       mc->dev_no = -1;
        mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, SLAB_ATOMIC, &mc->data_dma);
        if (!mc->data)
                goto out;
@@ -326,26 +334,42 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic
 
        usb_set_intfdata(intf, mc);
 
+       do {
+               bit = find_first_zero_bit(&device_no, sizeof(device_no));
+               value = test_and_set_bit(bit, &device_no);
+       } while(value);
+       mc->dev_no = bit;
+
+       mc->dev = device_create(phidget_class, &mc->udev->dev, 0,
+                               "motorcontrol%d", mc->dev_no);
+       if (IS_ERR(mc->dev)) {
+               rc = PTR_ERR(mc->dev);
+               mc->dev = NULL;
+               goto out;
+       }
+
+       dev_set_drvdata(mc->dev, mc);
+
        if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
                rc = -EIO;
                goto out;
        }
 
-       device_create_file(&intf->dev, &dev_attr_input0);
-       device_create_file(&intf->dev, &dev_attr_input1);
-       device_create_file(&intf->dev, &dev_attr_input2);
-       device_create_file(&intf->dev, &dev_attr_input3);
+       device_create_file(mc->dev, &dev_attr_input0);
+       device_create_file(mc->dev, &dev_attr_input1);
+       device_create_file(mc->dev, &dev_attr_input2);
+       device_create_file(mc->dev, &dev_attr_input3);
 
-       device_create_file(&intf->dev, &dev_attr_speed0);
-       device_create_file(&intf->dev, &dev_attr_speed1);
+       device_create_file(mc->dev, &dev_attr_speed0);
+       device_create_file(mc->dev, &dev_attr_speed1);
 
-       device_create_file(&intf->dev, &dev_attr_acceleration0);
-       device_create_file(&intf->dev, &dev_attr_acceleration1);
+       device_create_file(mc->dev, &dev_attr_acceleration0);
+       device_create_file(mc->dev, &dev_attr_acceleration1);
 
-       device_create_file(&intf->dev, &dev_attr_current0);
-       device_create_file(&intf->dev, &dev_attr_current1);
+       device_create_file(mc->dev, &dev_attr_current0);
+       device_create_file(mc->dev, &dev_attr_current1);
 
-       dev_info(&intf->dev, "USB Phidget MotorControl attached\n");
+       dev_info(&intf->dev, "USB PhidgetMotorControl attached\n");
 
        return 0;
 
@@ -355,6 +379,11 @@ out:
                        usb_free_urb(mc->irq);
                if (mc->data)
                        usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
+               if (mc->dev)
+                       device_unregister(mc->dev);
+               if (mc->dev_no >= 0)
+                       clear_bit(mc->dev_no, &device_no);
+
                kfree(mc);
        }
 
@@ -376,24 +405,27 @@ static void motorcontrol_disconnect(struct usb_interface *interface)
 
        cancel_delayed_work(&mc->do_notify);
 
-       device_remove_file(&interface->dev, &dev_attr_input0);
-       device_remove_file(&interface->dev, &dev_attr_input1);
-       device_remove_file(&interface->dev, &dev_attr_input2);
-       device_remove_file(&interface->dev, &dev_attr_input3);
+       device_remove_file(mc->dev, &dev_attr_input0);
+       device_remove_file(mc->dev, &dev_attr_input1);
+       device_remove_file(mc->dev, &dev_attr_input2);
+       device_remove_file(mc->dev, &dev_attr_input3);
 
-       device_remove_file(&interface->dev, &dev_attr_speed0);
-       device_remove_file(&interface->dev, &dev_attr_speed1);
+       device_remove_file(mc->dev, &dev_attr_speed0);
+       device_remove_file(mc->dev, &dev_attr_speed1);
 
-       device_remove_file(&interface->dev, &dev_attr_acceleration0);
-       device_remove_file(&interface->dev, &dev_attr_acceleration1);
+       device_remove_file(mc->dev, &dev_attr_acceleration0);
+       device_remove_file(mc->dev, &dev_attr_acceleration1);
 
-       device_remove_file(&interface->dev, &dev_attr_current0);
-       device_remove_file(&interface->dev, &dev_attr_current1);
+       device_remove_file(mc->dev, &dev_attr_current0);
+       device_remove_file(mc->dev, &dev_attr_current1);
 
-       dev_info(&interface->dev, "USB Phidget MotorControl disconnected\n");
+       device_unregister(mc->dev);
 
        usb_put_dev(mc->udev);
+       clear_bit(mc->dev_no, &device_no);
        kfree(mc);
+
+       dev_info(&interface->dev, "USB PhidgetMotorControl detached\n");
 }
 
 static struct usb_driver motorcontrol_driver = {

diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index c0df79c9653810b17e0e87737eb9e1ab37b1dad0..66be9513fd6f6f802c2faa3cd86416046970e61c 100644 (file)
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -15,14 +15,6 @@
  *
  * CAUTION: Generally you should use 0 < degrees < 180 as anything else
  * is probably beyond the range of your servo and may damage it.
- *
- * Jun 16, 2004: Sean Young <sean@mess.org>
- *  - cleanups
- *  - was using memory after kfree()
- * Aug 8, 2004: Sean Young <sean@mess.org>
- *  - set the highest angle as high as the hardware allows, there are 
- *    some odd servos out there
- *
  */
 
 #include <linux/kernel.h>
@@ -32,6 +24,8 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 
+#include "phidget.h"
+
 #define DRIVER_AUTHOR "Sean Young <sean@mess.org>"
 #define DRIVER_DESC "USB PhidgetServo Driver"
 
@@ -70,8 +64,12 @@ static struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
+static int unsigned long device_no;
+
 struct phidget_servo {
        struct usb_device *udev;
+       struct device *dev;
+       int dev_no;
        ulong type;
        int pulse[4];
        int degrees[4];
@@ -203,16 +201,16 @@ change_position_v20(struct phidget_servo *servo, int servo_no, int degrees,
 }
 
 #define show_set(value)        \
-static ssize_t set_servo##value (struct device *dev, struct device_attribute *attr,                    \
+static ssize_t set_servo##value (struct device *dev,                   \
+                                       struct device_attribute *attr,  \
                                        const char *buf, size_t count)  \
 {                                                                      \
        int degrees, minutes, retval;                                   \
-       struct usb_interface *intf = to_usb_interface (dev);            \
-       struct phidget_servo *servo = usb_get_intfdata (intf);          \
+       struct phidget_servo *servo = dev_get_drvdata(dev);             \
                                                                        \
        minutes = 0;                                                    \
        /* must at least convert degrees */                             \
-       if (sscanf (buf, "%d.%d", &degrees, &minutes) < 1) {            \
+       if (sscanf(buf, "%d.%d", &degrees, &minutes) < 1) {             \
                return -EINVAL;                                         \
        }                                                               \
                                                                        \
@@ -220,21 +218,22 @@ static ssize_t set_servo##value (struct device *dev, struct device_attribute *at
                return -EINVAL;                                         \
                                                                        \
        if (servo->type & SERVO_VERSION_30)                             \
-               retval = change_position_v30 (servo, value, degrees,    \
+               retval = change_position_v30(servo, value, degrees,     \
                                                        minutes);       \
        else                                                            \
-               retval = change_position_v20 (servo, value, degrees,    \
+               retval = change_position_v20(servo, value, degrees,     \
                                                        minutes);       \
                                                                        \
        return retval < 0 ? retval : count;                             \
 }                                                                      \
                                                                        \
-static ssize_t show_servo##value (struct device *dev, struct device_attribute *attr, char *buf)        \
+static ssize_t show_servo##value (struct device *dev,                  \
+                                       struct device_attribute *attr,  \
+                                       char *buf)                      \
 {                                                                      \
-       struct usb_interface *intf = to_usb_interface (dev);            \
-       struct phidget_servo *servo = usb_get_intfdata (intf);          \
+       struct phidget_servo *servo = dev_get_drvdata(dev);             \
                                                                        \
-       return sprintf (buf, "%d.%02d\n", servo->degrees[value],        \
+       return sprintf(buf, "%d.%02d\n", servo->degrees[value],         \
                                servo->minutes[value]);                 \
 }                                                                      \
 static DEVICE_ATTR(servo##value, S_IWUGO | S_IRUGO,                    \
@@ -250,6 +249,7 @@ servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
 {
        struct usb_device *udev = interface_to_usbdev(interface);
        struct phidget_servo *dev;
+       int bit, value;
 
        dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL);
        if (dev == NULL) {
@@ -261,18 +261,33 @@ servo_probe(struct usb_interface *interface, const struct usb_device_id *id)
        dev->type = id->driver_info;
        usb_set_intfdata(interface, dev);
 
-       device_create_file(&interface->dev, &dev_attr_servo0);
+        do {
+                bit = find_first_zero_bit(&device_no, sizeof(device_no));
+                value = test_and_set_bit(bit, &device_no);
+        } while(value);
+       dev->dev_no = bit;
+
+       dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
+                                "servo%d", dev->dev_no);
+       if (IS_ERR(dev->dev)) {
+               int rc = PTR_ERR(dev->dev);
+               clear_bit(dev->dev_no, &device_no);
+               kfree(dev);
+               return rc;
+       }
+
+       device_create_file(dev->dev, &dev_attr_servo0);
        if (dev->type & SERVO_COUNT_QUAD) {
-               device_create_file(&interface->dev, &dev_attr_servo1);
-               device_create_file(&interface->dev, &dev_attr_servo2);
-               device_create_file(&interface->dev, &dev_attr_servo3);
+               device_create_file(dev->dev, &dev_attr_servo1);
+               device_create_file(dev->dev, &dev_attr_servo2);
+               device_create_file(dev->dev, &dev_attr_servo3);
        }
 
        dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n",
                dev->type & SERVO_COUNT_QUAD ? 4 : 1,
                dev->type & SERVO_VERSION_30 ? 3 : 2);
 
-       if(!(dev->type & SERVO_VERSION_30))
+       if (!(dev->type & SERVO_VERSION_30))
                dev_info(&interface->dev,
                         "WARNING: v2.0 not tested! Please report if it works.\n");
 
@@ -287,19 +302,21 @@ servo_disconnect(struct usb_interface *interface)
        dev = usb_get_intfdata(interface);
        usb_set_intfdata(interface, NULL);
 
-       device_remove_file(&interface->dev, &dev_attr_servo0);
+       device_remove_file(dev->dev, &dev_attr_servo0);
        if (dev->type & SERVO_COUNT_QUAD) {
-               device_remove_file(&interface->dev, &dev_attr_servo1);
-               device_remove_file(&interface->dev, &dev_attr_servo2);
-               device_remove_file(&interface->dev, &dev_attr_servo3);
+               device_remove_file(dev->dev, &dev_attr_servo1);
+               device_remove_file(dev->dev, &dev_attr_servo2);
+               device_remove_file(dev->dev, &dev_attr_servo3);
        }
 
+       device_unregister(dev->dev);
        usb_put_dev(dev->udev);
 
        dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n",
                dev->type & SERVO_COUNT_QUAD ? 4 : 1,
                dev->type & SERVO_VERSION_30 ? 3 : 2);
 
+       clear_bit(dev->dev_no, &device_no);
        kfree(dev);
 }