Say Y here to use the Renesas M64278E-800 camera module,
          which supports VGA(640x480 pixcels) size of images.
  
- config VIDEO_AUDIO_DECODER
-       tristate "Add support for additional audio chipsets"
+ #
+ # Encoder / Decoder module configuration
+ #
+ 
+ menu "Encoders and Decoders"
+       depends on VIDEO_DEV
+ 
+ config VIDEO_MSP3400
+       tristate "Micronas MSP34xx audio decoders"
+       depends on VIDEO_DEV && I2C
+       ---help---
+         Support for the Micronas MSP34xx series of audio decoders.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called msp3400.
+ 
+ config VIDEO_CS53L32A
+       tristate "Cirrus Logic CS53L32A audio ADC"
+       depends on VIDEO_DEV && I2C && EXPERIMENTAL
+       ---help---
+         Support for the Cirrus Logic CS53L32A low voltage
+         stereo A/D converter.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called cs53l32a.
+ 
+ config VIDEO_WM8775
+       tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
+       depends on VIDEO_DEV && I2C && EXPERIMENTAL
+       ---help---
+         Support for the Wolfson Microelectronics WM8775 high
+         performance stereo A/D Converter with a 4 channel input mixer.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called wm8775.
+ 
+ config VIDEO_WM8739
+       tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
+       depends on VIDEO_DEV && I2C && EXPERIMENTAL
+       ---help---
+         Support for the Wolfson Microelectronics WM8739
+         stereo A/D Converter.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called wm8739.
+ 
+ source "drivers/media/video/cx25840/Kconfig"
+ 
+ config VIDEO_SAA711X
+       tristate "Philips SAA7113/4/5 video decoders"
+       depends on VIDEO_DEV && I2C && EXPERIMENTAL
+       ---help---
+         Support for the Philips SAA7113/4/5 video decoders.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called saa7115.
+ 
+ config VIDEO_SAA7127
+       tristate "Philips SAA7127/9 digital video encoders"
+       depends on VIDEO_DEV && I2C && EXPERIMENTAL
+       ---help---
+         Support for the Philips SAA7127/9 digital video encoders.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called saa7127.
+ 
+ config VIDEO_UPD64031A
+       tristate "NEC Electronics uPD64031A Ghost Reduction"
        depends on VIDEO_DEV && I2C && EXPERIMENTAL
        ---help---
-         Say Y here to compile drivers for WM8775 and CS53L32A audio
-         decoders.
+         Support for the NEC Electronics uPD64031A Ghost Reduction
+         video chip. It is most often found in NTSC TV cards made for
+         Japan and is used to reduce the 'ghosting' effect that can
+         be present in analog TV broadcasts.
  
- config VIDEO_DECODER
-       tristate "Add support for additional video chipsets"
+         To compile this driver as a module, choose M here: the
+         module will be called upd64031a.
+ 
+ config VIDEO_UPD64083
+       tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
        depends on VIDEO_DEV && I2C && EXPERIMENTAL
        ---help---
-         Say Y here to compile drivers for SAA7115, SAA7127 and CX25840
-         video decoders.
+         Support for the NEC Electronics uPD64083 3-Dimensional Y/C
+         separation video chip. It is used to improve the quality of
+         the colors of a composite signal.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called upd64083.
+ 
+ endmenu # encoder / decoder chips
+ 
+ #
+ # USB Multimedia device configuration
+ #
+ 
+ menu "V4L USB devices"
+       depends on USB && VIDEO_DEV
+ 
+ source "drivers/media/video/em28xx/Kconfig"
+ 
+ config USB_DSBR
+       tristate "D-Link USB FM radio support (EXPERIMENTAL)"
+       depends on USB && VIDEO_DEV && EXPERIMENTAL
+       ---help---
+         Say Y here if you want to connect this type of radio to your
+         computer's USB port. Note that the audio is not digital, and
+         you must connect the line out connector to a sound card or a
+         set of speakers.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called dsbr100.
+ 
+ source "drivers/media/video/usbvideo/Kconfig"
+ 
+ source "drivers/media/video/et61x251/Kconfig"
+ 
+ config USB_OV511
+       tristate "USB OV511 Camera support"
+       depends on USB && VIDEO_DEV
+       ---help---
+         Say Y here if you want to connect this type of camera to your
+         computer's USB port. See <file:Documentation/video4linux/ov511.txt>
+         for more information and for a list of supported cameras.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called ov511.
+ 
+ config USB_SE401
+       tristate "USB SE401 Camera support"
+       depends on USB && VIDEO_DEV
+       ---help---
+         Say Y here if you want to connect this type of camera to your
+         computer's USB port. See <file:Documentation/video4linux/se401.txt>
+         for more information and for a list of supported cameras.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called se401.
+ 
+ source "drivers/media/video/sn9c102/Kconfig"
+ 
+ config USB_STV680
+       tristate "USB STV680 (Pencam) Camera support"
+       depends on USB && VIDEO_DEV
+       ---help---
+         Say Y here if you want to connect this type of camera to your
+         computer's USB port. This includes the Pencam line of cameras.
+         See <file:Documentation/video4linux/stv680.txt> for more information
+         and for a list of supported cameras.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called stv680.
+ 
+ config USB_W9968CF
+       tristate "USB W996[87]CF JPEG Dual Mode Camera support"
+       depends on USB && VIDEO_DEV && I2C
+       select VIDEO_OVCAMCHIP
+       ---help---
+         Say Y here if you want support for cameras based on OV681 or
+         Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
+ 
+         This driver has an optional plugin, which is distributed as a
+         separate module only (released under GPL). It allows to use higher
+         resolutions and framerates, but cannot be included in the official
+         Linux kernel for performance purposes.
+ 
+         See <file:Documentation/video4linux/w9968cf.txt> for more info.
+ 
+         To compile this driver as a module, choose M here: the
+         module will be called w9968cf.
+ 
+ source "drivers/media/video/zc0301/Kconfig"
+ 
+ source "drivers/media/video/pwc/Kconfig"
+ 
+ endmenu # V4L USB devices
  
 +source drivers/media/video/omap/Kconfig
 +
  endmenu