]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
[PATCH] au1000_eth.c probe code straightened up
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Wed, 19 Apr 2006 18:46:21 +0000 (22:46 +0400)
committerJeff Garzik <jeff@garzik.org>
Thu, 20 Apr 2006 21:35:26 +0000 (17:35 -0400)
      Straighten up the AMD Au1xx0 Ethernet probing code, make it print out (and
store in the 'net_device' structure) the physical address of the controller,
not the KSEG1-based virtual. Make the driver also claim/release the 4-byte MAC
enable registers and assign to the Ethernet ports two consecutive MAC
addresses to match those that are printed on their stickers.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/net/au1000_eth.c

index 1363083b4d83e5262646d3af5713e6a4d96a7a6d..d5dfc784bccd565a6f99ef347d4e315c907a7212 100644 (file)
@@ -2,7 +2,7 @@
  *
  * Alchemy Au1x00 ethernet driver
  *
- * Copyright 2001,2002,2003 MontaVista Software Inc.
+ * Copyright 2001-2003, 2006 MontaVista Software Inc.
  * Copyright 2002 TimeSys Corp.
  * Added ethtool/mii-tool support,
  * Copyright 2004 Matt Porter <mporter@kernel.crashing.org>
@@ -67,7 +67,7 @@ static int au1000_debug = 5;
 static int au1000_debug = 3;
 #endif
 
-#define DRV_NAME       "au1000eth"
+#define DRV_NAME       "au1000_eth"
 #define DRV_VERSION    "1.5"
 #define DRV_AUTHOR     "Pete Popov <ppopov@embeddedalley.com>"
 #define DRV_DESC       "Au1xxx on-chip Ethernet driver"
@@ -79,7 +79,7 @@ MODULE_LICENSE("GPL");
 // prototypes
 static void hard_stop(struct net_device *);
 static void enable_rx_tx(struct net_device *dev);
-static struct net_device * au1000_probe(u32 ioaddr, int irq, int port_num);
+static struct net_device * au1000_probe(int port_num);
 static int au1000_init(struct net_device *);
 static int au1000_open(struct net_device *);
 static int au1000_close(struct net_device *);
@@ -1159,12 +1159,27 @@ setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
 }
 
 static struct {
-       int port;
        u32 base_addr;
        u32 macen_addr;
        int irq;
        struct net_device *dev;
-} iflist[2];
+} iflist[2] = {
+#ifdef CONFIG_SOC_AU1000
+       {AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT},
+       {AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT}
+#endif
+#ifdef CONFIG_SOC_AU1100
+       {AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT}
+#endif
+#ifdef CONFIG_SOC_AU1500
+       {AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT},
+       {AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT}
+#endif
+#ifdef CONFIG_SOC_AU1550
+       {AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT},
+       {AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT}
+#endif
+};
 
 static int num_ifs;
 
@@ -1175,58 +1190,14 @@ static int num_ifs;
  */
 static int __init au1000_init_module(void)
 {
-       struct cpuinfo_mips *c = &current_cpu_data;
        int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
        struct net_device *dev;
        int i, found_one = 0;
 
-       switch (c->cputype) {
-#ifdef CONFIG_SOC_AU1000
-       case CPU_AU1000:
-               num_ifs = 2 - ni;
-               iflist[0].base_addr = AU1000_ETH0_BASE;
-               iflist[1].base_addr = AU1000_ETH1_BASE;
-               iflist[0].macen_addr = AU1000_MAC0_ENABLE;
-               iflist[1].macen_addr = AU1000_MAC1_ENABLE;
-               iflist[0].irq = AU1000_MAC0_DMA_INT;
-               iflist[1].irq = AU1000_MAC1_DMA_INT;
-               break;
-#endif
-#ifdef CONFIG_SOC_AU1100
-       case CPU_AU1100:
-               num_ifs = 1 - ni;
-               iflist[0].base_addr = AU1100_ETH0_BASE;
-               iflist[0].macen_addr = AU1100_MAC0_ENABLE;
-               iflist[0].irq = AU1100_MAC0_DMA_INT;
-               break;
-#endif
-#ifdef CONFIG_SOC_AU1500
-       case CPU_AU1500:
-               num_ifs = 2 - ni;
-               iflist[0].base_addr = AU1500_ETH0_BASE;
-               iflist[1].base_addr = AU1500_ETH1_BASE;
-               iflist[0].macen_addr = AU1500_MAC0_ENABLE;
-               iflist[1].macen_addr = AU1500_MAC1_ENABLE;
-               iflist[0].irq = AU1500_MAC0_DMA_INT;
-               iflist[1].irq = AU1500_MAC1_DMA_INT;
-               break;
-#endif
-#ifdef CONFIG_SOC_AU1550
-       case CPU_AU1550:
-               num_ifs = 2 - ni;
-               iflist[0].base_addr = AU1550_ETH0_BASE;
-               iflist[1].base_addr = AU1550_ETH1_BASE;
-               iflist[0].macen_addr = AU1550_MAC0_ENABLE;
-               iflist[1].macen_addr = AU1550_MAC1_ENABLE;
-               iflist[0].irq = AU1550_MAC0_DMA_INT;
-               iflist[1].irq = AU1550_MAC1_DMA_INT;
-               break;
-#endif
-       default:
-               num_ifs = 0;
-       }
+       num_ifs = NUM_ETH_INTERFACES - ni;
+
        for(i = 0; i < num_ifs; i++) {
-               dev = au1000_probe(iflist[i].base_addr, iflist[i].irq, i);
+               dev = au1000_probe(i);
                iflist[i].dev = dev;
                if (dev)
                        found_one++;
@@ -1435,8 +1406,7 @@ static struct ethtool_ops au1000_ethtool_ops = {
        .get_link = au1000_get_link
 };
 
-static struct net_device *
-au1000_probe(u32 ioaddr, int irq, int port_num)
+static struct net_device * au1000_probe(int port_num)
 {
        static unsigned version_printed = 0;
        struct au1000_private *aup = NULL;
@@ -1444,94 +1414,95 @@ au1000_probe(u32 ioaddr, int irq, int port_num)
        db_dest_t *pDB, *pDBfree;
        char *pmac, *argptr;
        char ethaddr[6];
-       int i, err;
+       int irq, i, err;
+       u32 base, macen;
+
+       if (port_num >= NUM_ETH_INTERFACES)
+               return NULL;
 
-       if (!request_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE, "Au1x00 ENET"))
+       base  = CPHYSADDR(iflist[port_num].base_addr );
+       macen = CPHYSADDR(iflist[port_num].macen_addr);
+       irq = iflist[port_num].irq;
+
+       if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") ||
+           !request_mem_region(macen, 4, "Au1x00 ENET"))
                return NULL;
 
-       if (version_printed++ == 0) 
+       if (version_printed++ == 0)
                printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
 
        dev = alloc_etherdev(sizeof(struct au1000_private));
        if (!dev) {
-               printk (KERN_ERR "au1000 eth: alloc_etherdev failed\n");  
+               printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME);
                return NULL;
        }
 
-       if ((err = register_netdev(dev))) {
-               printk(KERN_ERR "Au1x_eth Cannot register net device err %d\n",
-                               err);
+       if ((err = register_netdev(dev)) != 0) {
+               printk(KERN_ERR "%s: Cannot register net device, error %d\n",
+                               DRV_NAME, err);
                free_netdev(dev);
                return NULL;
        }
 
-       printk("%s: Au1x Ethernet found at 0x%x, irq %d\n", 
-                       dev->name, ioaddr, irq);
+       printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n",
+               dev->name, base, irq);
 
        aup = dev->priv;
 
        /* Allocate the data buffers */
        /* Snooping works fine with eth on all au1xxx */
-       aup->vaddr = (u32)dma_alloc_noncoherent(NULL,
-                       MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
-                       &aup->dma_addr,
-                       0);
+       aup->vaddr = (u32)dma_alloc_noncoherent(NULL, MAX_BUF_SIZE *
+                                               (NUM_TX_BUFFS + NUM_RX_BUFFS),
+                                               &aup->dma_addr, 0);
        if (!aup->vaddr) {
                free_netdev(dev);
-               release_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE);
+               release_mem_region( base, MAC_IOSIZE);
+               release_mem_region(macen, 4);
                return NULL;
        }
 
        /* aup->mac is the base address of the MAC's registers */
-       aup->mac = (volatile mac_reg_t *)((unsigned long)ioaddr);
+       aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr;
+
        /* Setup some variables for quick register address access */
-       if (ioaddr == iflist[0].base_addr)
-       {
-               /* check env variables first */
-               if (!get_ethernet_addr(ethaddr)) { 
+       aup->enable = (volatile u32 *)iflist[port_num].macen_addr;
+       aup->mac_id = port_num;
+       au_macs[port_num] = aup;
+
+       if (port_num == 0) {
+               /* Check the environment variables first */
+               if (get_ethernet_addr(ethaddr) == 0)
                        memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
-               else {
+               else {
                        /* Check command line */
                        argptr = prom_getcmdline();
-                       if ((pmac = strstr(argptr, "ethaddr=")) == NULL) {
-                               printk(KERN_INFO "%s: No mac address found\n", 
-                                               dev->name);
-                               /* use the hard coded mac addresses */
-                       else {
+                       if ((pmac = strstr(argptr, "ethaddr=")) == NULL)
+                               printk(KERN_INFO "%s: No MAC address found\n",
+                                                dev->name);
+                               /* Use the hard coded MAC addresses */
+                       else {
                                str2eaddr(ethaddr, pmac + strlen("ethaddr="));
                                memcpy(au1000_mac_addr, ethaddr, 
-                                               sizeof(au1000_mac_addr));
+                                      sizeof(au1000_mac_addr));
                        }
                }
-                       aup->enable = (volatile u32 *) 
-                               ((unsigned long)iflist[0].macen_addr);
-               memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
+
                setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
-               aup->mac_id = 0;
-               au_macs[0] = aup;
-       }
-               else
-       if (ioaddr == iflist[1].base_addr)
-       {
-                       aup->enable = (volatile u32 *) 
-                               ((unsigned long)iflist[1].macen_addr);
-               memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
-               dev->dev_addr[4] += 0x10;
+       } else if (port_num == 1)
                setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
-               aup->mac_id = 1;
-               au_macs[1] = aup;
-       }
-       else
-       {
-               printk(KERN_ERR "%s: bad ioaddr\n", dev->name);
-       }
 
-       /* bring the device out of reset, otherwise probing the mii
-        * will hang */
+       /*
+        * Assign to the Ethernet ports two consecutive MAC addresses
+        * to match those that are printed on their stickers
+        */
+       memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
+       dev->dev_addr[5] += port_num;
+
+       /* Bring the device out of reset, otherwise probing the MII will hang */
        *aup->enable = MAC_EN_CLOCK_ENABLE;
        au_sync_delay(2);
-       *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 | 
-               MAC_EN_RESET2 | MAC_EN_CLOCK_ENABLE;
+       *aup->enable = MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2 |
+                      MAC_EN_CLOCK_ENABLE;
        au_sync_delay(2);
 
        aup->mii = kmalloc(sizeof(struct mii_phy), GFP_KERNEL);
@@ -1580,7 +1551,7 @@ au1000_probe(u32 ioaddr, int irq, int port_num)
        }
 
        spin_lock_init(&aup->lock);
-       dev->base_addr = ioaddr;
+       dev->base_addr = base;
        dev->irq = irq;
        dev->open = au1000_open;
        dev->hard_start_xmit = au1000_tx;
@@ -1614,13 +1585,12 @@ err_out:
                if (aup->tx_db_inuse[i])
                        ReleaseDB(aup, aup->tx_db_inuse[i]);
        }
-       dma_free_noncoherent(NULL,
-                       MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
-                       (void *)aup->vaddr,
-                       aup->dma_addr);
+       dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
+                            (void *)aup->vaddr, aup->dma_addr);
        unregister_netdev(dev);
        free_netdev(dev);
-       release_mem_region(CPHYSADDR(ioaddr), MAC_IOSIZE);
+       release_mem_region( base, MAC_IOSIZE);
+       release_mem_region(macen, 4);
        return NULL;
 }
 
@@ -1805,20 +1775,18 @@ static void __exit au1000_cleanup_module(void)
                        aup = (struct au1000_private *) dev->priv;
                        unregister_netdev(dev);
                        kfree(aup->mii);
-                       for (j = 0; j < NUM_RX_DMA; j++) {
+                       for (j = 0; j < NUM_RX_DMA; j++)
                                if (aup->rx_db_inuse[j])
                                        ReleaseDB(aup, aup->rx_db_inuse[j]);
-                       }
-                       for (j = 0; j < NUM_TX_DMA; j++) {
+                       for (j = 0; j < NUM_TX_DMA; j++)
                                if (aup->tx_db_inuse[j])
                                        ReleaseDB(aup, aup->tx_db_inuse[j]);
-                       }
-                       dma_free_noncoherent(NULL,
-                                       MAX_BUF_SIZE * (NUM_TX_BUFFS+NUM_RX_BUFFS),
-                                       (void *)aup->vaddr,
-                                       aup->dma_addr);
+                       dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+                                            (NUM_TX_BUFFS + NUM_RX_BUFFS),
+                                            (void *)aup->vaddr, aup->dma_addr);
+                       release_mem_region(dev->base_addr, MAC_IOSIZE);
+                       release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4);
                        free_netdev(dev);
-                       release_mem_region(CPHYSADDR(iflist[i].base_addr), MAC_IOSIZE);
                }
        }
 }