To compile this driver as a module, choose M here: the
module will be called omap-keypad.
+config KEYBOARD_TWL4030
+ tristate "TI TWL4030 keypad support"
+ depends on TWL4030_CORE && (MACH_OMAP_2430SDP || MACH_OMAP_3430SDP)
+ help
+ Say Y here if you want to use the OMAP TWL4030 keypad.
+
+ To compile this driver as a module, choose M here: the
+ module will be called omap-twl4030keypad. This driver depends on
+ TWL4030 Core and TWL4030 GPIO I2C client driver
+
+config OMAP_PS2
+ tristate "TI OMAP Innovator 1510 PS/2 keyboard & mouse support"
+ depends on ARCH_OMAP15XX && MACH_OMAP_INNOVATOR
+ help
+ Say Y here if you want to use the OMAP Innovator 1510 PS/2
+ keyboard and mouse.
+
+ To compile this driver as a module, choose M here: the
+ module will be called innovator_ps2.
+
+config KEYBOARD_TSC2301
+ tristate "TSC2301 keypad support"
+ depends on SPI_TSC2301
+ help
+ Say Y here for if you are using the keypad features of TSC2301.
+
config KEYBOARD_PXA27x
tristate "PXA27x keyboard support"
depends on PXA27x
config KEYBOARD_BFIN
tristate "Blackfin BF54x keypad support"
- depends on BF54x
+ depends on (BF54x && !BF544)
help
Say Y here if you want to use the BF54x keypad.
platforms. The support is integrated with the rest of
the Menelaus driver; it's not separate module.
+config RTC_DRV_TWL4030
+ tristate "OMAP TWL4030 Real Time Clock"
+ depends on RTC_CLASS && TWL4030_CORE
+ help
+ If you say yes here you get support for internal Real-Time
+ Clock of TWL4030 chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-twl4030.
+
endif # I2C
comment "SPI RTC drivers"
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BFIN
+ depends on BLACKFIN
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.
config SPI_BFIN
tristate "SPI controller driver for ADI Blackfin5xx"
- depends on SPI_MASTER && BFIN
+ depends on SPI_MASTER && BLACKFIN
help
This is the SPI controller master driver for Blackfin 5xx processor.
This driver can also be built as a module. If so, the module
will be called at25.
+config SPI_TSC2101
+ depends on SPI_MASTER
+ tristate "TSC2101 chip support"
+ ---help---
+ Say Y here if you want support for the TSC2101 chip.
+ At the moment it provides basic register read / write interface
+ as well as a way to enable the MCLK clock.
+
+config SPI_TSC2102
+ depends on SPI_MASTER
+ tristate "TSC2102 codec support"
+ ---help---
+ Say Y here if you want support for the TSC2102 chip. It
+ will be needed for the touchscreen driver on some boards.
+
+config SPI_TSC210X
+ depends on SPI_MASTER && EXPERIMENTAL
+ tristate "TI TSC210x (TSC2101/TSC2102) support"
+ help
+ Say Y here if you want support for the TSC210x chips. Some
+ boards use these for touchscreen and audio support.
+
+ These are members of a family of highly integrated PDA analog
+ interface circuit. They include a 12-bit ADC used for battery,
+ temperature, touchscreen, and other sensors. They also have
+ an audio DAC and amplifier, and in some models an audio ADC.
+ The audio support is highly chip-specific, but most of the
+ sensor support works the same.
+
+ Note that the device has to be present in the board's SPI
+ devices table for this driver to load. This driver doesn't
+ automatically enable touchscreen, sensors or audio
+ functionality - enable these in their respective menus.
+
+config SPI_TSC2301
+ tristate "TSC2301 driver"
+ depends on SPI_MASTER
+ help
+ Say Y here if you have a TSC2301 chip connected to an SPI
+ bus on your board.
+
+ The TSC2301 is a highly integrated PDA analog interface circuit.
+ It contains a complete 12-bit A/D resistive touch screen
+ converter (ADC) including drivers, touch pressure measurement
+ capability, keypad controller, and 8-bit D/A converter (DAC) output
+ for LCD contrast control.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tsc2301.
+
+config SPI_TSC2301_AUDIO
+ boolean "TSC2301 audio support"
+ depends on SPI_TSC2301 && SND
+ help
+ Say Y here for if you are using the audio features of TSC2301.
+
config SPI_SPIDEV
tristate "User mode SPI device driver support"
depends on SPI_MASTER && EXPERIMENTAL