- directory with information on the NetLabel subsystem.
networking/
- directory with info on various aspects of networking with Linux.
-nfsroot.txt
- - short guide on setting up a diskless box with NFS root filesystem.
nmi_watchdog.txt
- info on NMI watchdog for SMP systems.
nommu-mmap.txt
- a description of what robust futexes are.
rocket.txt
- info on the Comtrol RocketPort multiport serial driver.
-rpc-cache.txt
- - introduction to the caching mechanisms in the sunrpc layer.
rt-mutex-design.txt
- description of the RealTime mutex implementation design.
rt-mutex.txt
point out some special detail about the sign-off.
-13) When to use Acked-by:
+13) When to use Acked-by: and Cc:
The Signed-off-by: tag indicates that the signer was involved in the
development of the patch, or that he/she was in the patch's delivery path.
For example, if a patch affects multiple subsystems and has an Acked-by: from
one subsystem maintainer then this usually indicates acknowledgement of just
the part which affects that maintainer's code. Judgement should be used here.
- When in doubt people should refer to the original discussion in the mailing
+When in doubt people should refer to the original discussion in the mailing
list archives.
+If a person has had the opportunity to comment on a patch, but has not
+provided such comments, you may optionally add a "Cc:" tag to the patch.
+This is the only tag which might be added without an explicit action by the
+person it names. This tag documents that potentially interested parties
+have been included in the discussion
-14) The canonical patch format
+
+14) Using Test-by: and Reviewed-by:
+
+A Tested-by: tag indicates that the patch has been successfully tested (in
+some environment) by the person named. This tag informs maintainers that
+some testing has been performed, provides a means to locate testers for
+future patches, and ensures credit for the testers.
+
+Reviewed-by:, instead, indicates that the patch has been reviewed and found
+acceptable according to the Reviewer's Statement:
+
+ Reviewer's statement of oversight
+
+ By offering my Reviewed-by: tag, I state that:
+
+ (a) I have carried out a technical review of this patch to
+ evaluate its appropriateness and readiness for inclusion into
+ the mainline kernel.
+
+ (b) Any problems, concerns, or questions relating to the patch
+ have been communicated back to the submitter. I am satisfied
+ with the submitter's response to my comments.
+
+ (c) While there may be things that could be improved with this
+ submission, I believe that it is, at this time, (1) a
+ worthwhile modification to the kernel, and (2) free of known
+ issues which would argue against its inclusion.
+
+ (d) While I have reviewed the patch and believe it to be sound, I
+ do not (unless explicitly stated elsewhere) make any
+ warranties or guarantees that it will achieve its stated
+ purpose or function properly in any given situation.
+
+A Reviewed-by tag is a statement of opinion that the patch is an
+appropriate modification of the kernel without any remaining serious
+technical issues. Any interested reviewer (who has done the work) can
+offer a Reviewed-by tag for a patch. This tag serves to give credit to
+reviewers and to inform maintainers of the degree of review which has been
+done on the patch. Reviewed-by: tags, when supplied by reviewers known to
+understand the subject area and to perform thorough reviews, will normally
+increase the liklihood of your patch getting into the kernel.
+
+
+15) The canonical patch format
The canonical patch subject line is:
limitations, and under gcc they are as cheap as macros.
Macros should only be used for cases where a static inline is clearly
-suboptimal [there a few, isolated cases of this in fast paths],
+suboptimal [there are a few, isolated cases of this in fast paths],
or where it is impossible to use a static inline function [such as
string-izing].
- info on the Linux implementation of Sys V mandatory file locking.
ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
+nfsroot.txt
+ - short guide on setting up a diskless box with NFS root filesystem.
ntfs.txt
- info and mount options for the NTFS filesystem (Windows NT).
ocfs2.txt
- info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
+rpc-cache.txt
+ - introduction to the caching mechanisms in the sunrpc layer.
+seq_file.txt
+ - how to use the seq_file API
sharedsubtree.txt
- a description of shared subtrees for namespaces.
smbfs.txt
--- /dev/null
+The seq_file interface
+
+ Copyright 2003 Jonathan Corbet <corbet@lwn.net>
+ This file is originally from the LWN.net Driver Porting series at
+ http://lwn.net/Articles/driver-porting/
+
+
+There are numerous ways for a device driver (or other kernel component) to
+provide information to the user or system administrator. One useful
+technique is the creation of virtual files, in debugfs, /proc or elsewhere.
+Virtual files can provide human-readable output that is easy to get at
+without any special utility programs; they can also make life easier for
+script writers. It is not surprising that the use of virtual files has
+grown over the years.
+
+Creating those files correctly has always been a bit of a challenge,
+however. It is not that hard to make a virtual file which returns a
+string. But life gets trickier if the output is long - anything greater
+than an application is likely to read in a single operation. Handling
+multiple reads (and seeks) requires careful attention to the reader's
+position within the virtual file - that position is, likely as not, in the
+middle of a line of output. The kernel has traditionally had a number of
+implementations that got this wrong.
+
+The 2.6 kernel contains a set of functions (implemented by Alexander Viro)
+which are designed to make it easy for virtual file creators to get it
+right.
+
+The seq_file interface is available via <linux/seq_file.h>. There are
+three aspects to seq_file:
+
+ * An iterator interface which lets a virtual file implementation
+ step through the objects it is presenting.
+
+ * Some utility functions for formatting objects for output without
+ needing to worry about things like output buffers.
+
+ * A set of canned file_operations which implement most operations on
+ the virtual file.
+
+We'll look at the seq_file interface via an extremely simple example: a
+loadable module which creates a file called /proc/sequence. The file, when
+read, simply produces a set of increasing integer values, one per line. The
+sequence will continue until the user loses patience and finds something
+better to do. The file is seekable, in that one can do something like the
+following:
+
+ dd if=/proc/sequence of=out1 count=1
+ dd if=/proc/sequence skip=1 out=out2 count=1
+
+Then concatenate the output files out1 and out2 and get the right
+result. Yes, it is a thoroughly useless module, but the point is to show
+how the mechanism works without getting lost in other details. (Those
+wanting to see the full source for this module can find it at
+http://lwn.net/Articles/22359/).
+
+
+The iterator interface
+
+Modules implementing a virtual file with seq_file must implement a simple
+iterator object that allows stepping through the data of interest.
+Iterators must be able to move to a specific position - like the file they
+implement - but the interpretation of that position is up to the iterator
+itself. A seq_file implementation that is formatting firewall rules, for
+example, could interpret position N as the Nth rule in the chain.
+Positioning can thus be done in whatever way makes the most sense for the
+generator of the data, which need not be aware of how a position translates
+to an offset in the virtual file. The one obvious exception is that a
+position of zero should indicate the beginning of the file.
+
+The /proc/sequence iterator just uses the count of the next number it
+will output as its position.
+
+Four functions must be implemented to make the iterator work. The first,
+called start() takes a position as an argument and returns an iterator
+which will start reading at that position. For our simple sequence example,
+the start() function looks like:
+
+ static void *ct_seq_start(struct seq_file *s, loff_t *pos)
+ {
+ loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL);
+ if (! spos)
+ return NULL;
+ *spos = *pos;
+ return spos;
+ }
+
+The entire data structure for this iterator is a single loff_t value
+holding the current position. There is no upper bound for the sequence
+iterator, but that will not be the case for most other seq_file
+implementations; in most cases the start() function should check for a
+"past end of file" condition and return NULL if need be.
+
+For more complicated applications, the private field of the seq_file
+structure can be used. There is also a special value whch can be returned
+by the start() function called SEQ_START_TOKEN; it can be used if you wish
+to instruct your show() function (described below) to print a header at the
+top of the output. SEQ_START_TOKEN should only be used if the offset is
+zero, however.
+
+The next function to implement is called, amazingly, next(); its job is to
+move the iterator forward to the next position in the sequence. The
+example module can simply increment the position by one; more useful
+modules will do what is needed to step through some data structure. The
+next() function returns a new iterator, or NULL if the sequence is
+complete. Here's the example version:
+
+ static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos)
+ {
+ loff_t *spos = v;
+ *pos = ++*spos;
+ return spos;
+ }
+
+The stop() function is called when iteration is complete; its job, of
+course, is to clean up. If dynamic memory is allocated for the iterator,
+stop() is the place to free it.
+
+ static void ct_seq_stop(struct seq_file *s, void *v)
+ {
+ kfree(v);
+ }
+
+Finally, the show() function should format the object currently pointed to
+by the iterator for output. It should return zero, or an error code if
+something goes wrong. The example module's show() function is:
+
+ static int ct_seq_show(struct seq_file *s, void *v)
+ {
+ loff_t *spos = v;
+ seq_printf(s, "%lld\n", (long long)*spos);
+ return 0;
+ }
+
+We will look at seq_printf() in a moment. But first, the definition of the
+seq_file iterator is finished by creating a seq_operations structure with
+the four functions we have just defined:
+
+ static const struct seq_operations ct_seq_ops = {
+ .start = ct_seq_start,
+ .next = ct_seq_next,
+ .stop = ct_seq_stop,
+ .show = ct_seq_show
+ };
+
+This structure will be needed to tie our iterator to the /proc file in
+a little bit.
+
+It's worth noting that the interator value returned by start() and
+manipulated by the other functions is considered to be completely opaque by
+the seq_file code. It can thus be anything that is useful in stepping
+through the data to be output. Counters can be useful, but it could also be
+a direct pointer into an array or linked list. Anything goes, as long as
+the programmer is aware that things can happen between calls to the
+iterator function. However, the seq_file code (by design) will not sleep
+between the calls to start() and stop(), so holding a lock during that time
+is a reasonable thing to do. The seq_file code will also avoid taking any
+other locks while the iterator is active.
+
+
+Formatted output
+
+The seq_file code manages positioning within the output created by the
+iterator and getting it into the user's buffer. But, for that to work, that
+output must be passed to the seq_file code. Some utility functions have
+been defined which make this task easy.
+
+Most code will simply use seq_printf(), which works pretty much like
+printk(), but which requires the seq_file pointer as an argument. It is
+common to ignore the return value from seq_printf(), but a function
+producing complicated output may want to check that value and quit if
+something non-zero is returned; an error return means that the seq_file
+buffer has been filled and further output will be discarded.
+
+For straight character output, the following functions may be used:
+
+ int seq_putc(struct seq_file *m, char c);
+ int seq_puts(struct seq_file *m, const char *s);
+ int seq_escape(struct seq_file *m, const char *s, const char *esc);
+
+The first two output a single character and a string, just like one would
+expect. seq_escape() is like seq_puts(), except that any character in s
+which is in the string esc will be represented in octal form in the output.
+
+There is also a function for printing filenames:
+
+ int seq_path(struct seq_file *m, struct path *path, char *esc);
+
+Here, path indicates the file of interest, and esc is a set of characters
+which should be escaped in the output.
+
+
+Making it all work
+
+So far, we have a nice set of functions which can produce output within the
+seq_file system, but we have not yet turned them into a file that a user
+can see. Creating a file within the kernel requires, of course, the
+creation of a set of file_operations which implement the operations on that
+file. The seq_file interface provides a set of canned operations which do
+most of the work. The virtual file author still must implement the open()
+method, however, to hook everything up. The open function is often a single
+line, as in the example module:
+
+ static int ct_open(struct inode *inode, struct file *file)
+ {
+ return seq_open(file, &ct_seq_ops);
+ }
+
+Here, the call to seq_open() takes the seq_operations structure we created
+before, and gets set up to iterate through the virtual file.
+
+On a successful open, seq_open() stores the struct seq_file pointer in
+file->private_data. If you have an application where the same iterator can
+be used for more than one file, you can store an arbitrary pointer in the
+private field of the seq_file structure; that value can then be retrieved
+by the iterator functions.
+
+The other operations of interest - read(), llseek(), and release() - are
+all implemented by the seq_file code itself. So a virtual file's
+file_operations structure will look like:
+
+ static const struct file_operations ct_file_ops = {
+ .owner = THIS_MODULE,
+ .open = ct_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release
+ };
+
+There is also a seq_release_private() which passes the contents of the
+seq_file private field to kfree() before releasing the structure.
+
+The final step is the creation of the /proc file itself. In the example
+code, that is done in the initialization code in the usual way:
+
+ static int ct_init(void)
+ {
+ struct proc_dir_entry *entry;
+
+ entry = create_proc_entry("sequence", 0, NULL);
+ if (entry)
+ entry->proc_fops = &ct_file_ops;
+ return 0;
+ }
+
+ module_init(ct_init);
+
+And that is pretty much it.
+
+
+seq_list
+
+If your file will be iterating through a linked list, you may find these
+routines useful:
+
+ struct list_head *seq_list_start(struct list_head *head,
+ loff_t pos);
+ struct list_head *seq_list_start_head(struct list_head *head,
+ loff_t pos);
+ struct list_head *seq_list_next(void *v, struct list_head *head,
+ loff_t *ppos);
+
+These helpers will interpret pos as a position within the list and iterate
+accordingly. Your start() and next() functions need only invoke the
+seq_list_* helpers with a pointer to the appropriate list_head structure.
+
+
+The extra-simple version
+
+For extremely simple virtual files, there is an even easier interface. A
+module can define only the show() function, which should create all the
+output that the virtual file will contain. The file's open() method then
+calls:
+
+ int single_open(struct file *file,
+ int (*show)(struct seq_file *m, void *p),
+ void *data);
+
+When output time comes, the show() function will be called once. The data
+value given to single_open() can be found in the private field of the
+seq_file structure. When using single_open(), the programmer should use
+single_release() instead of seq_release() in the file_operations structure
+to avoid a memory leak.
event devices are used to provide local CPU functionality such as process
accounting, profiling, and high resolution timers.
-The management layer assignes one or more of the folliwing functions to a clock
+The management layer assigns one or more of the following functions to a clock
event device:
- system global periodic tick (jiffies update)
- cpu local update_process_times
- Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
- Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
- Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
-
Introduction:
- The hw_random device driver is software that makes use of a
+ The hw_random framework is software that makes use of a
special hardware feature on your CPU or motherboard,
- a Random Number Generator (RNG).
+ a Random Number Generator (RNG). The software has two parts:
+ a core providing the /dev/hw_random character device and its
+ sysfs support, plus a hardware-specific driver that plugs
+ into that core.
- In order to make effective use of this device driver, you
+ To make the most effective use of these mechanisms, you
should download the support software as well. Download the
latest version of the "rng-tools" package from the
hw_random driver's official Web site:
http://sourceforge.net/projects/gkernel/
-About the Intel RNG hardware, from the firmware hub datasheet:
-
- The Firmware Hub integrates a Random Number Generator (RNG)
- using thermal noise generated from inherently random quantum
- mechanical properties of silicon. When not generating new random
- bits the RNG circuitry will enter a low power state. Intel will
- provide a binary software driver to give third party software
- access to our RNG for use as a security feature. At this time,
- the RNG is only to be used with a system in an OS-present state.
+ Those tools use /dev/hw_random to fill the kernel entropy pool,
+ which is used internally and exported by the /dev/urandom and
+ /dev/random special files.
Theory of operation:
- Character driver. Using the standard open()
+ CHARACTER DEVICE. Using the standard open()
and read() system calls, you can read random data from
the hardware RNG device. This data is NOT CHECKED by any
fitness tests, and could potentially be bogus (if the
a security-conscious person would run fitness tests on the
data before assuming it is truly random.
- /dev/hwrandom is char device major 10, minor 183.
+ The rng-tools package uses such tests in "rngd", and lets you
+ run them by hand with a "rngtest" utility.
+
+ /dev/hw_random is char device major 10, minor 183.
+
+ CLASS DEVICE. There is a /sys/class/misc/hw_random node with
+ two unique attributes, "rng_available" and "rng_current". The
+ "rng_available" attribute lists the hardware-specific drivers
+ available, while "rng_current" lists the one which is currently
+ connected to /dev/hw_random. If your system has more than one
+ RNG available, you may change the one used by writing a name from
+ the list in "rng_available" into "rng_current".
+
+==========================================================================
+
+ Hardware driver for Intel/AMD/VIA Random Number Generators (RNG)
+ Copyright 2000,2001 Jeff Garzik <jgarzik@pobox.com>
+ Copyright 2000,2001 Philipp Rumpf <prumpf@mandrakesoft.com>
+
+
+About the Intel RNG hardware, from the firmware hub datasheet:
+
+ The Firmware Hub integrates a Random Number Generator (RNG)
+ using thermal noise generated from inherently random quantum
+ mechanical properties of silicon. When not generating new random
+ bits the RNG circuitry will enter a low power state. Intel will
+ provide a binary software driver to give third party software
+ access to our RNG for use as a security feature. At this time,
+ the RNG is only to be used with a system in an OS-present state.
-Driver notes:
+Intel RNG Driver notes:
* FIXME: support poll(2)
These INTA-D PCI IRQs are always 'local to the card', their real meaning
depends on which slot they are in. If you look at the daisy chaining diagram,
-a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ2 of
+a card in slot4, issuing INTA IRQ, it will end up as a signal on PIRQ4 of
the PCI chipset. Most cards issue INTA, this creates optimal distribution
between the PIRQ lines. (distributing IRQ sources properly is not a
necessity, PCI IRQs can be shared at will, but it's a good for performance
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
- acpi_new_pts_ordering [HW,ACPI]
- Enforce the ACPI 2.0 ordering of the _PTS control
- method wrt putting devices into low power states
- default: pre ACPI 2.0 ordering of _PTS
-
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
ccw_timeout_log [S390]
See Documentation/s390/CommonIO for details.
+ cgroup_disable= [KNL] Disable a particular controller
+ Format: {name of the controller(s) to disable}
+ {Currently supported controllers - "memory"}
+
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
arch/alpha/kernel/core_marvel.c.
ip= [IP_PNP]
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards
See comment before ip2_setup() in
l2cr= [PPC]
+ l3cr= [PPC]
+
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
memmap=nn[KMG]$ss[KMG]
[KNL,ACPI] Mark specific memory as reserved.
Region of memory to be used, from ss to ss+nn.
+ Example: Exclude memory from 0x18690000-0x1869ffff
+ memmap=64K$0x18690000
+ or
+ memmap=0x10000$0x18690000
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
file if at all.
nfsaddrs= [NFS]
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
nfsroot= [NFS] nfs root filesystem for disk-less boxes.
- See Documentation/nfsroot.txt.
+ See Documentation/filesystems/nfsroot.txt.
nfs.callback_tcpport=
[NFS] set the TCP port on which the NFSv4 callback
/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and the
- * virtual devices, then reads repeatedly from /dev/lguest to run the Guest.
-:*/
+ * "physical" memory for the new Guest by mapping the kernel image and
+ * the virtual devices, then opens /dev/lguest to tell the kernel
+ * about the Guest and control it. :*/
#define _LARGEFILE64_SOURCE
#define _GNU_SOURCE
#include <stdio.h>
#include "linux/virtio_console.h"
#include "linux/virtio_ring.h"
#include "asm-x86/bootparam.h"
-/*L:110 We can ignore the 38 include files we need for this program, but I do
+/*L:110 We can ignore the 39 include files we need for this program, but I do
* want to draw attention to the use of kernel-style types.
*
* As Linus said, "C is a Spartan language, and so should your naming be." I
err(1, "Reading program headers");
/* Try all the headers: there are usually only three. A read-only one,
- * a read-write one, and a "note" section which isn't loadable. */
+ * a read-write one, and a "note" section which we don't load. */
for (i = 0; i < ehdr->e_phnum; i++) {
/* If this isn't a loadable segment, we ignore it */
if (phdr[i].p_type != PT_LOAD)
if (memcmp(hdr.e_ident, ELFMAG, SELFMAG) == 0)
return map_elf(fd, &hdr);
- /* Otherwise we assume it's a bzImage, and try to unpack it */
+ /* Otherwise we assume it's a bzImage, and try to load it. */
return load_bzimage(fd);
}
return len;
}
-/* Once we know how much memory we have, we can construct simple linear page
+/* Once we know how much memory we have we can construct simple linear page
* tables which set virtual == physical which will get the Guest far enough
* into the boot to create its own.
*
* We lay them out of the way, just below the initrd (which is why we need to
- * know its size). */
+ * know its size here). */
static unsigned long setup_pagetables(unsigned long mem,
unsigned long initrd_size)
{
*
* Handling output for network is also simple: we get all the output buffers
* and write them (ignoring the first element) to this device's file descriptor
- * (stdout). */
+ * (/dev/net/tun).
+ */
static void handle_net_output(int fd, struct virtqueue *vq)
{
unsigned int head, out, in;
write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
}
-/* Resetting a device is fairly easy. */
+/* When the Guest asks us to reset a device, it's is fairly easy. */
static void reset_device(struct device *dev)
{
struct virtqueue *vq;
if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
break;
- /* Otherwise, call the device(s) which have readable
- * file descriptors and a method of handling them. */
+ /* Otherwise, call the device(s) which have readable file
+ * descriptors and a method of handling them. */
for (i = devices.dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
int dev_fd;
* should no longer service it. Networking and
* console do this when there's no input
* buffers to deliver into. Console also uses
- * it when it discovers that stdin is
- * closed. */
+ * it when it discovers that stdin is closed. */
FD_CLR(i->fd, &devices.infds);
/* Tell waker to ignore it too, by sending a
* negative fd number (-1, since 0 is a valid
*
* All devices need a descriptor so the Guest knows it exists, and a "struct
* device" so the Launcher can keep track of it. We have common helper
- * routines to allocate and manage them. */
+ * routines to allocate and manage them.
+ */
/* The layout of the device page is a "struct lguest_device_desc" followed by a
* number of virtqueue descriptors, then two sets of feature bits, then an
struct virtqueue **i, *vq = malloc(sizeof(*vq));
void *p;
- /* First we need some pages for this virtqueue. */
+ /* First we need some memory for this virtqueue. */
pages = (vring_size(num_descs, getpagesize()) + getpagesize() - 1)
/ getpagesize();
p = get_pages(pages);
}
/* The first half of the feature bitmask is for us to advertise features. The
- * second half if for the Guest to accept features. */
+ * second half is for the Guest to accept features. */
static void add_feature(struct device *dev, unsigned bit)
{
u8 *features = get_feature_bits(dev);
}
/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory. */
+ * calling new_dev_desc() to allocate the descriptor and device memory.
+ *
+ * See what I mean about userspace being boring? */
static struct device *new_device(const char *name, u16 type, int fd,
bool (*handle_input)(int, struct device *))
{
* Launcher triggers interrupt to Guest. */
int done_fd;
};
-/*:*/
/*L:210
* The Disk
while (read(vblk->workpipe[0], &c, 1) == 1) {
/* We acknowledge each request immediately to reduce latency,
* rather than waiting until we've done them all. I haven't
- * measured to see if it makes any difference. */
+ * measured to see if it makes any difference.
+ *
+ * That would be an interesting test, wouldn't it? You could
+ * also try having more than one I/O thread. */
while (service_io(dev))
write(vblk->done_fd, &c, 1);
}
}
/* Now we've seen the I/O thread, we return to the Launcher to see what happens
- * when the thread tells us it's completed some I/O. */
+ * when that thread tells us it's completed some I/O. */
static bool handle_io_finish(int fd, struct device *dev)
{
char c;
* more work. */
pipe(vblk->workpipe);
- /* Create stack for thread and run it */
+ /* Create stack for thread and run it. Since stack grows upwards, we
+ * point the stack pointer to the end of this region. */
stack = malloc(32768);
/* SIGCHLD - We dont "wait" for our cloned thread, so prevent it from
* becoming a zombie. */
- if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
+ if (clone(io_thread, stack + 32768, CLONE_VM | SIGCHLD, dev) == -1)
err(1, "Creating clone");
/* We don't need to keep the I/O thread's end of the pipes open. */
verbose("device %u: virtblock %llu sectors\n",
devices.device_num, le64_to_cpu(conf.capacity));
}
-/* That's the end of device setup. :*/
+/* That's the end of device setup. */
-/* Reboot */
+/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
static void __attribute__((noreturn)) restart_guest(void)
{
unsigned int i;
- /* Closing pipes causes the waker thread and io_threads to die, and
+ /* Closing pipes causes the Waker thread and io_threads to die, and
* closing /dev/lguest cleans up the Guest. Since we don't track all
* open fds, we simply close everything beyond stderr. */
for (i = 3; i < FD_SETSIZE; i++)
err(1, "Could not exec %s", main_args[0]);
}
-/*L:220 Finally we reach the core of the Launcher, which runs the Guest, serves
+/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
* its input and output, and finally, lays it to rest. */
static void __attribute__((noreturn)) run_guest(int lguest_fd)
{
err(1, "Resetting break");
}
}
-/*
+/*L:240
* This is the end of the Launcher. The good news: we are over halfway
* through! The bad news: the most fiendish part of the code still lies ahead
* of us.
* device receive input from a file descriptor, we keep an fdset
* (infds) and the maximum fd number (max_infd) with the head of the
* list. We also keep a pointer to the last device. Finally, we keep
- * the next interrupt number to hand out (1: remember that 0 is used by
- * the timer). */
+ * the next interrupt number to use for devices (1: remember that 0 is
+ * used by the timer). */
FD_ZERO(&devices.infds);
devices.max_infd = -1;
devices.lastdev = NULL;
lguest_fd = tell_kernel(pgdir, start);
/* We fork off a child process, which wakes the Launcher whenever one
- * of the input file descriptors needs attention. Otherwise we would
- * run the Guest until it tries to output something. */
+ * of the input file descriptors needs attention. We call this the
+ * Waker, and we'll cover it in a moment. */
waker_fd = setup_waker(lguest_fd);
/* Finally, run the Guest. This doesn't return. */
-Rusty's Remarkably Unreliable Guide to Lguest
- - or, A Young Coder's Illustrated Hypervisor
-http://lguest.ozlabs.org
+ __
+ (___()'`; Rusty's Remarkably Unreliable Guide to Lguest
+ /, /` - or, A Young Coder's Illustrated Hypervisor
+ \\"--\\ http://lguest.ozlabs.org
Lguest is designed to be a minimal hypervisor for the Linux kernel, for
Linux developers and users to experiment with virtualization with the
CONFIG_PHYSICAL_ALIGN=0x100000)
"Device Drivers":
+ "Block devices"
+ "Virtio block driver (EXPERIMENTAL)" = M/Y
"Network device support"
"Universal TUN/TAP device driver support" = M/Y
- (CONFIG_TUN=m)
- "Virtualization"
- "Linux hypervisor example code" = M/Y
- (CONFIG_LGUEST=m)
+ "Virtio network driver (EXPERIMENTAL)" = M/Y
+ (CONFIG_VIRTIO_BLK=m, CONFIG_VIRTIO_NET=m and CONFIG_TUN=m)
+
+ "Virtualization"
+ "Linux hypervisor example code" = M/Y
+ (CONFIG_LGUEST=m)
- A tool called "lguest" is available in this directory: type "make"
to build it. If you didn't build your kernel in-tree, use "make
- IP policy-based routing
ray_cs.txt
- Raylink Wireless LAN card driver info.
-sk98lin.txt
- - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
- Ethernet Adapter family driver info
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
+++ /dev/null
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1 Overview
- 2 Required Files
- 3 Installation
- 3.1 Driver Installation
- 3.2 Inclusion of adapter at system start
- 4 Driver Parameters
- 4.1 Per-Port Parameters
- 4.2 Adapter Parameters
- 5 Large Frame Support
- 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7 Troubleshooting
-
-===========================================================================
-
-
-1 Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2 Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3 Installation
-===============
-
-It is recommended to download the latest version of the driver from the
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be
-installed. For details on how to patch a Linux kernel, refer to the
-patch.txt file.
-
-3.1 Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting"
- below.
-
-The driver can either be integrated into the kernel or it can be compiled
-as a module. Select the appropriate option during the kernel
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (*)
-3. Build a new kernel when the configuration of the above options is
- finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
- The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in
- your computer and you have a /proc file system, execute the command:
- "ls /proc/net/sk98lin/"
- This should produce an output containing a line with the following
- format:
- eth0 eth1 ...
- which indicates that your adapter has been found and initialized.
-
- NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx
- adapter installed, the adapters will be listed as 'eth0',
- 'eth1', 'eth2', etc.
- For each adapter, repeat steps 3 and 4 below.
-
- NOTE 2: If you have other Ethernet adapters installed, your Marvell
- Yukon or SysKonnect SK-98xx adapter will be mapped to the
- next available number, e.g. 'eth1'. The mapping is executed
- automatically.
- The module installation message (displayed either in a system
- log file or on the console) prints a line for each adapter
- found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by
- entering:
- ifconfig eth0 <ip-address>
- With this command, the adapter is connected to the Ethernet.
-
- SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter
- is now active, the link status LED of the primary port is active and
- the link status LED of the secondary port (on dual port adapters) is
- blinking (if the ports are connected to a switch or hub).
- SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
- In addition, you will receive a status message on the console stating
- "ethX: network connection up using port Y" and showing the selected
- connection parameters (x stands for the ethernet device number
- (0,1,2, etc), y stands for the port name (A or B)).
-
- NOTE: If you are in doubt about IP addresses, ask your network
- administrator for assistance.
-
-4. Your adapter should now be fully operational.
- Use 'ping <otherstation>' to verify the connection to other computers
- on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
- For example by executing:
- "cat /proc/net/sk98lin/eth0"
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2 Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4 Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
- options sk98lin ...
- For "...", the same syntax is required as described for the command
- line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
- or
- unload and reload the driver.
- The syntax of the driver parameters is:
-
- modprobe sk98lin parameter=value1[,value2[,value3...]]
-
- where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown
- below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
- modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
- limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
- The current limit is 16. If you happen to install
- more adapters, adjust this and recompile.
-
-
-4.1 Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter: Speed_?
-Values: 10, 100, 1000, Auto
-Default: Auto
-
-This parameter is used to set the speed capabilities. It is only valid
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter: AutoNeg_?
-Values: On, Off, Sense
-Default: On
-
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter: DupCap_?
-Values: Half, Full, Both
-Default: Both
-
-This parameters is only relevant if auto-negotiation for this port is
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter: FlowCtrl_?
-Values: Sym, SymOrRem, LocSend, None
-Default: SymOrRem
-
-This parameter can be used to set the flow control capabilities the
-port reports during auto-negotiation. It can be set for each port
-individually.
-Possible modes:
- -- Sym = Symmetric: both link partners are allowed to send
- PAUSE frames
- -- SymOrRem = SymmetricOrRemote: both or only remote partner
- are allowed to send PAUSE frames
- -- LocSend = LocalSend: only local link partner is allowed
- to send PAUSE frames
- -- None = no link partner is allowed to send PAUSE frames
-
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter: Role_?
-Values: Auto, Master, Slave
-Default: Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the
-slave. Usually, this is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2 Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter: ConType
-Values: Auto, 100FD, 100HD, 10FD, 10HD
-Default: Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
- ConType | DupCap AutoNeg FlowCtrl Role Speed
- ----------+------------------------------------------------------
- Auto | Both On SymOrRem Auto Auto
- 100FD | Full Off None Auto (ignored) 100
- 100HD | Half Off None Auto (ignored) 100
- 10FD | Full Off None Auto (ignored) 10
- 10HD | Half Off None Auto (ignored) 10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter: Moderation
-Values: None, Static, Dynamic
-Default: None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
- -- None - No interrupt moderation is applied on the adapter card.
- Therefore, each transmit or receive interrupt is served immediately
- as soon as it appears on the interrupt line of the adapter card.
-
- -- Static - Interrupt moderation is applied on the adapter card.
- All transmit and receive interrupts are queued until a complete
- moderation interval ends. If such a moderation interval ends, all
- queued interrupts are processed in one big bunch without any delay.
- The term 'static' reflects the fact, that interrupt moderation is
- always enabled, regardless how much network load is currently
- passing via a particular interface. In addition, the duration of
- the moderation interval has a fixed length that never changes while
- the driver is operational.
-
- -- Dynamic - Interrupt moderation might be applied on the adapter card,
- depending on the load of the system. If the driver detects that the
- system load is too high, the driver tries to shield the system against
- too much network load by enabling interrupt moderation. If - at a later
- time - the CPU utilization decreases again (or if the network load is
- negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter: IntsPerSec
-Values: 30...40000 (interrupts per second)
-Default: 2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval.
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds.
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per
-second) seems to be meaningful, but the increase of packet-processing delay
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter: PrefPort
-Values: A, B
-Default: A
-
-This is used to force the preferred port to A or B (on dual-port network
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter: RlmtMode
-Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default: CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port
-fails, RLMT switches immediately to the standby link. The virtual link is
-maintained as long as at least one 'physical' link is up.
-
-Possible modes:
-
- -- CheckLinkState - Check link state only: RLMT uses the link state
- reported by the adapter hardware for each individual port to
- determine whether a port can be used for all network traffic or
- not.
-
- -- CheckLocalPort - In this mode, RLMT monitors the network path
- between the two ports of an adapter by regularly exchanging packets
- between them. This mode requires a network configuration in which
- the two ports are able to "see" each other (i.e. there must not be
- any router between the ports).
-
- -- CheckSeg - Check local port and segmentation: This mode supports the
- same functions as the CheckLocalPort mode and additionally checks
- network segmentation between the ports. Therefore, this mode is only
- to be used if Gigabit Ethernet switches are installed on the network
- that have been configured to use the Spanning Tree protocol.
-
- -- DualNet - In this mode, ports A and B are used as separate devices.
- If you have a dual port adapter, port A will be configured as eth0
- and port B as eth1. Both ports can be used independently with
- distinct IP addresses. The preferred port setting is not used.
- RLMT is turned off.
-
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations
- where a network path between the ports on one adapter exists.
- Moreover, they are not designed to work where adapters are connected
- back-to-back.
-***
-
-
-5 Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large
-frames can result in an improved throughput if transferring large amounts
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the
-interface to the desired value (up to 9000), execute the following
-command:
- ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch,
-it should be configured to allow large frames and auto-negotiation should
-be set to OFF. The setting must be configured on all adapters that can be
-reached by the large frames. If one adapter is not set to receive large
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the
-following command:
- ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig'
-line to the system startup sequence (named something like "S99sk98lin"
-in /etc/rc.d/rc2.d).
-***
-
-
-6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad.
-These features are only available after installation of open source
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source
- modules and does not take the responsibility for any kind of
- failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may
- cause problems when unloading the driver.
-
-
-7 Troubleshooting
-==================
-
-If any problems occur during the installation process, check the
-following list:
-
-
-Problem: The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
- 'Ethernet controller: SysKonnect SK-98xx ...'
- If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
- been found by the system and should be operational.
- If this entry does not exist or if the file '/proc/pci' is not
- found, there may be a hardware problem or the PCI support may
- not be enabled in your kernel.
- The adapter can be checked using the diagnostics program which
- is available on the SysKonnect web site:
- www.syskonnect.com
-
- Some COMPAQ machines have problems dealing with PCI under Linux.
- This problem is described in the 'PCI howto' document
- (included in some distributions or available from the
- web, e.g. at 'www.linux.org').
-
-
-Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
- error message 'Operation not permitted' is displayed.
-Reason: You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem: Upon use of the command 'ping <address>' the message
- "ping: sendto: Network is unreachable" is displayed.
-Reason: Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the
- route in the 'network configuration'.
- Check the existing routes with the 'route' command and check
- if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem: The driver can be started, the adapter is connected to the
- network, but you cannot receive or transmit any packets;
- e.g. 'ping' does not work.
-Reason: There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the
- manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry
- automatically, problems of this kind may occur here as well. We've
- come across a situation in which the driver started correctly at
- system start, but after the driver has been removed and reloaded,
- the route of the adapter's network pointed to the 'dummy0'device
- and had to be corrected manually.
-
-
-Problem: Your computer should act as a router between multiple
- IP subnetworks (using multiple adapters), but computers in
- other subnetworks cannot be reached.
-Reason: Either the router's kernel is not configured for IP forwarding
- or the routing table and gateway configuration of at least one
- computer is not working.
-
-Problem: Upon driver start, the following error message is displayed:
- "eth0: -- ERROR --
- Class: internal Software error
- Nr: 0xcc
- Msg: SkGeInitPort() cannot init running ports"
-Reason: You are using a driver compiled for single processor machines
- on a multiprocessor machine with SMP (Symmetric MultiProcessor)
- kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
- the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@syskonnect.de).
-When contacting our technical support, please ensure that the following
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
may implicitly disable the NMI watchdog.]
For x86-64, the needed APIC is always compiled in, and the NMI watchdog is
-always enabled with I/O-APIC mode (nmi_watchdog=1). Currently, local APIC
-mode (nmi_watchdog=2) does not work on x86-64.
+always enabled with I/O-APIC mode (nmi_watchdog=1).
Using local APIC (nmi_watchdog=2) needs the first performance register, so
you can't use it for other purposes (such as high precision performance
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
- VII - Specifying interrupt information for devices
+ VII - Marvell Discovery mv64[345]6x System Controller chips
+ 1) The /system-controller node
+ 2) Child nodes of /system-controller
+ a) Marvell Discovery MDIO bus
+ b) Marvell Discovery ethernet controller
+ c) Marvell Discovery PHY nodes
+ d) Marvell Discovery SDMA nodes
+ e) Marvell Discovery BRG nodes
+ f) Marvell Discovery CUNIT nodes
+ g) Marvell Discovery MPSCROUTING nodes
+ h) Marvell Discovery MPSCINTR nodes
+ i) Marvell Discovery MPSC nodes
+ j) Marvell Discovery Watch Dog Timer nodes
+ k) Marvell Discovery I2C nodes
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+ o) Marvell Discovery PCI host bridge node
+ p) Marvell Discovery CPU Error nodes
+ q) Marvell Discovery SRAM Controller nodes
+ r) Marvell Discovery PCI Error Handler nodes
+ s) Marvell Discovery Memory Controller nodes
+
+ VIII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
+ VIII - Specifying GPIO information for devices
+ 1) gpios property
+ 2) gpio-controller nodes
+
Appendix A - Sample SOC node for MPC8540
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
- phy-handle : The phandle for the PHY connected to this controller.
Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
interrupts = <20 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
- linux,network-index = <0>;
fsl,cpm-command = <12000300>;
};
EMAC, that is the content of the current (bogus) "phy-port"
property.
- Recommended properties:
- - linux,network-index : This is the intended "index" of this
- network device. This is used by the bootwrapper to interpret
- MAC addresses passed by the firmware when no information other
- than indices is available to associate an address with a device.
-
Optional properties:
- phy-address : 1 cell, optional, MDIO address of the PHY. If absent,
a search is performed.
Example:
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
};
- More devices will be defined as this spec matures.
+VII - Marvell Discovery mv64[345]6x System Controller chips
+===========================================================
+
+The Marvell mv64[345]60 series of system controller chips contain
+many of the peripherals needed to implement a complete computer
+system. In this section, we define device tree nodes to describe
+the system controller chip itself and each of the peripherals
+which it contains. Compatible string values for each node are
+prefixed with the string "marvell,", for Marvell Technology Group Ltd.
+
+1) The /system-controller node
+
+ This node is used to represent the system-controller and must be
+ present when the system uses a system contller chip. The top-level
+ system-controller node contains information that is global to all
+ devices within the system controller chip. The node name begins
+ with "system-controller" followed by the unit address, which is
+ the base address of the memory-mapped register set for the system
+ controller chip.
+
+ Required properties:
+
+ - ranges : Describes the translation of system controller addresses
+ for memory mapped registers.
+ - clock-frequency: Contains the main clock frequency for the system
+ controller chip.
+ - reg : This property defines the address and size of the
+ memory-mapped registers contained within the system controller
+ chip. The address specified in the "reg" property should match
+ the unit address of the system-controller node.
+ - #address-cells : Address representation for system controller
+ devices. This field represents the number of cells needed to
+ represent the address of the memory-mapped registers of devices
+ within the system controller chip.
+ - #size-cells : Size representation for for the memory-mapped
+ registers within the system controller chip.
+ - #interrupt-cells : Defines the width of cells used to represent
+ interrupts.
+
+ Optional properties:
+
+ - model : The specific model of the system controller chip. Such
+ as, "mv64360", "mv64460", or "mv64560".
+ - compatible : A string identifying the compatibility identifiers
+ of the system controller chip.
+
+ The system-controller node contains child nodes for each system
+ controller device that the platform uses. Nodes should not be created
+ for devices which exist on the system controller chip but are not used
+
+ Example Marvell Discovery mv64360 system-controller node:
+
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64360"; /* Default */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
+
+ [ child node definitions... ]
+ }
+
+2) Child nodes of /system-controller
+
+ a) Marvell Discovery MDIO bus
+
+ The MDIO is a bus to which the PHY devices are connected. For each
+ device that exists on this bus, a child node should be created. See
+ the definition of the PHY node below for an example of how to define
+ a PHY.
+
+ Required properties:
+ - #address-cells : Should be <1>
+ - #size-cells : Should be <0>
+ - device_type : Should be "mdio"
+ - compatible : Should be "marvell,mv64360-mdio"
+
+ Example:
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ device_type = "mdio";
+ compatible = "marvell,mv64360-mdio";
+
+ ethernet-phy@0 {
+ ......
+ };
+ };
+
+
+ b) Marvell Discovery ethernet controller
+
+ The Discover ethernet controller is described with two levels
+ of nodes. The first level describes an ethernet silicon block
+ and the second level describes up to 3 ethernet nodes within
+ that block. The reason for the multiple levels is that the
+ registers for the node are interleaved within a single set
+ of registers. The "ethernet-block" level describes the
+ shared register set, and the "ethernet" nodes describe ethernet
+ port-specific properties.
+
+ Ethernet block node
+
+ Required properties:
+ - #address-cells : <1>
+ - #size-cells : <0>
+ - compatible : "marvell,mv64360-eth-block"
+ - reg : Offset and length of the register set for this block
+
+ Example Discovery Ethernet block node:
+ ethernet-block@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-block";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
+ .......
+ };
+ };
+
+ Ethernet port node
+
+ Required properties:
+ - device_type : Should be "network".
+ - compatible : Should be "marvell,mv64360-eth".
+ - reg : Should be <0>, <1>, or <2>, according to which registers
+ within the silicon block the device uses.
+ - interrupts : <a> where a is the interrupt number for the port.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+ - phy : the phandle for the PHY connected to this ethernet
+ controller.
+ - local-mac-address : 6 bytes, MAC address
+
+ Example Discovery Ethernet port node:
+ ethernet@0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+
+
+ c) Marvell Discovery PHY nodes
+
+ Required properties:
+ - device_type : Should be "ethernet-phy"
+ - interrupts : <a> where a is the interrupt number for this phy.
+ - interrupt-parent : the phandle for the interrupt controller that
+ services interrupts for this device.
+ - reg : The ID number for the phy, usually a small integer
+
+ Example Discovery PHY node:
+ ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ compatible = "broadcom,bcm5421";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+
+
+ d) Marvell Discovery SDMA nodes
+
+ Represent DMA hardware associated with the MPSC (multiprotocol
+ serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-sdma"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the DMA
+ device.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SDMA node:
+ sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ e) Marvell Discovery BRG nodes
+
+ Represent baud rate generator hardware associated with the MPSC
+ (multiprotocol serial controllers).
+
+ Required properties:
+ - compatible : "marvell,mv64360-brg"
+ - reg : Offset and length of the register set for this device
+ - clock-src : A value from 0 to 15 which selects the clock
+ source for the baud rate generator. This value corresponds
+ to the CLKS value in the BRGx configuration register. See
+ the mv64x60 User's Manual.
+ - clock-frequence : The frequency (in Hz) of the baud rate
+ generator's input clock.
+ - current-speed : The current speed setting (presumably by
+ firmware) of the baud rate generator.
+
+ Example Discovery BRG node:
+ brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
+ };
+
+
+ f) Marvell Discovery CUNIT nodes
+
+ Represent the Serial Communications Unit device hardware.
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ cunit@f200 {
+ reg = <0xf200 0x200>;
+ };
+
+
+ g) Marvell Discovery MPSCROUTING nodes
+
+ Represent the Discovery's MPSC routing hardware
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery CUNIT node:
+ mpscrouting@b500 {
+ reg = <0xb400 0xc>;
+ };
+
+
+ h) Marvell Discovery MPSCINTR nodes
+
+ Represent the Discovery's MPSC DMA interrupt hardware registers
+ (SDMA cause and mask registers).
+
+ Required properties:
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPSCINTR node:
+ mpsintr@b800 {
+ reg = <0xb800 0x100>;
+ };
+
+
+ i) Marvell Discovery MPSC nodes
+
+ Represent the Discovery's MPSC (Multiprotocol Serial Controller)
+ serial port.
+
+ Required properties:
+ - device_type : "serial"
+ - compatible : "marvell,mv64360-mpsc"
+ - reg : Offset and length of the register set for this device
+ - sdma : the phandle for the SDMA node used by this port
+ - brg : the phandle for the BRG node used by this port
+ - cunit : the phandle for the CUNIT node used by this port
+ - mpscrouting : the phandle for the MPSCROUTING node used by this port
+ - mpscintr : the phandle for the MPSCINTR node used by this port
+ - cell-index : the hardware index of this cell in the MPSC core
+ - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
+ register
+ - interrupts : <a> where a is the interrupt number for the MPSC.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery MPSCINTR node:
+ mpsc@8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ max_idle = <40>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ j) Marvell Discovery Watch Dog Timer nodes
+
+ Represent the Discovery's watchdog timer hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-wdt"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery Watch Dog Timer node:
+ wdt@b410 {
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+
+ k) Marvell Discovery I2C nodes
+
+ Represent the Discovery's I2C hardware
+
+ Required properties:
+ - device_type : "i2c"
+ - compatible : "marvell,mv64360-i2c"
+ - reg : Offset and length of the register set for this device
+ - interrupts : <a> where a is the interrupt number for the I2C.
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery I2C node:
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
+
+ Represent the Discovery's PIC hardware
+
+ Required properties:
+ - #interrupt-cells : <1>
+ - #address-cells : <0>
+ - compatible : "marvell,mv64360-pic"
+ - reg : Offset and length of the register set for this device
+ - interrupt-controller
+
+ Example Discovery PIC node:
+ pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
+ interrupt-controller;
+ };
+
+
+ m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
+
+ Represent the Discovery's MPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-mpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery MPP node:
+ mpp@f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+
+ n) Marvell Discovery GPP (General Purpose Pins) nodes
+
+ Represent the Discovery's GPP hardware
+
+ Required properties:
+ - compatible : "marvell,mv64360-gpp"
+ - reg : Offset and length of the register set for this device
+
+ Example Discovery GPP node:
+ gpp@f000 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+
+ o) Marvell Discovery PCI host bridge node
+
+ Represents the Discovery's PCI host bridge device. The properties
+ for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
+ 1275-1994. A typical value for the compatible property is
+ "marvell,mv64360-pci".
+
+ Example Discovery PCI host bridge node
+ pci@80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0a */
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
+
+ /* IDSEL 0x0b */
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
+
+ /* IDSEL 0x0c */
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
+
+ /* IDSEL 0x0d */
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
+ >;
+ };
+
+
+ p) Marvell Discovery CPU Error nodes
+
+ Represent the Discovery's CPU error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-cpu-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery CPU Error node:
+ cpu-error@0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ q) Marvell Discovery SRAM Controller nodes
+
+ Represent the Discovery's SRAM controller device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-sram-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery SRAM Controller node:
+ sram-ctrl@0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ r) Marvell Discovery PCI Error Handler nodes
+
+ Represent the Discovery's PCI error handler device.
+
+ Required properties:
+ - compatible : "marvell,mv64360-pci-error"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery PCI Error Handler node:
+ pci-error@1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+ s) Marvell Discovery Memory Controller nodes
+
+ Represent the Discovery's memory controller device.
-VII - Specifying interrupt information for devices
+ Required properties:
+ - compatible : "marvell,mv64360-mem-ctrl"
+ - reg : Offset and length of the register set for this device
+ - interrupts : the interrupt number for this device
+ - interrupt-parent : the phandle for the interrupt controller
+ that services interrupts for this device.
+
+ Example Discovery Memory Controller node:
+ mem-ctrl@1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+
+
+VIII - Specifying interrupt information for devices
===================================================
The device tree represents the busses and devices of a hardware
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
+VIII - Specifying GPIO information for devices
+==============================================
+
+1) gpios property
+-----------------
+
+Nodes that makes use of GPIOs should define them using `gpios' property,
+format of which is: <&gpio-controller1-phandle gpio1-specifier
+ &gpio-controller2-phandle gpio2-specifier
+ 0 /* holes are permitted, means no GPIO 3 */
+ &gpio-controller4-phandle gpio4-specifier
+ ...>;
+
+Note that gpio-specifier length is controller dependent.
+
+gpio-specifier may encode: bank, pin position inside the bank,
+whether pin is open-drain and whether pin is logically inverted.
+
+Example of the node using GPIOs:
+
+ node {
+ gpios = <&qe_pio_e 18 0>;
+ };
+
+In this example gpio-specifier is "18 0" and encodes GPIO pin number,
+and empty GPIO flags as accepted by the "qe_pio_e" gpio-controller.
+
+2) gpio-controller nodes
+------------------------
+
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+Example of two SOC GPIO banks defined as gpio-controller nodes:
+
+ qe_pio_a: gpio-controller@1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-a", "fsl,qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller@1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,qe-pario-bank-e", "fsl,qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
Appendix A - Sample SOC node for MPC8540
========================================
--- /dev/null
+
+ Hypervisor-Assisted Dump
+ ------------------------
+ November 2007
+
+The goal of hypervisor-assisted dump is to enable the dump of
+a crashed system, and to do so from a fully-reset system, and
+to minimize the total elapsed time until the system is back
+in production use.
+
+As compared to kdump or other strategies, hypervisor-assisted
+dump offers several strong, practical advantages:
+
+-- Unlike kdump, the system has been reset, and loaded
+ with a fresh copy of the kernel. In particular,
+ PCI and I/O devices have been reinitialized and are
+ in a clean, consistent state.
+-- As the dump is performed, the dumped memory becomes
+ immediately available to the system for normal use.
+-- After the dump is completed, no further reboots are
+ required; the system will be fully usable, and running
+ in it's normal, production mode on it normal kernel.
+
+The above can only be accomplished by coordination with,
+and assistance from the hypervisor. The procedure is
+as follows:
+
+-- When a system crashes, the hypervisor will save
+ the low 256MB of RAM to a previously registered
+ save region. It will also save system state, system
+ registers, and hardware PTE's.
+
+-- After the low 256MB area has been saved, the
+ hypervisor will reset PCI and other hardware state.
+ It will *not* clear RAM. It will then launch the
+ bootloader, as normal.
+
+-- The freshly booted kernel will notice that there
+ is a new node (ibm,dump-kernel) in the device tree,
+ indicating that there is crash data available from
+ a previous boot. It will boot into only 256MB of RAM,
+ reserving the rest of system memory.
+
+-- Userspace tools will parse /sys/kernel/release_region
+ and read /proc/vmcore to obtain the contents of memory,
+ which holds the previous crashed kernel. The userspace
+ tools may copy this info to disk, or network, nas, san,
+ iscsi, etc. as desired.
+
+ For Example: the values in /sys/kernel/release-region
+ would look something like this (address-range pairs).
+ CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
+ DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
+
+-- As the userspace tools complete saving a portion of
+ dump, they echo an offset and size to
+ /sys/kernel/release_region to release the reserved
+ memory back to general use.
+
+ An example of this is:
+ "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ which will release 256MB at the 1GB boundary.
+
+Please note that the hypervisor-assisted dump feature
+is only available on Power6-based systems with recent
+firmware versions.
+
+Implementation details:
+----------------------
+
+During boot, a check is made to see if firmware supports
+this feature on this particular machine. If it does, then
+we check to see if a active dump is waiting for us. If yes
+then everything but 256 MB of RAM is reserved during early
+boot. This area is released once we collect a dump from user
+land scripts that are run. If there is dump data, then
+the /sys/kernel/release_region file is created, and
+the reserved memory is held.
+
+If there is no waiting dump data, then only the highest
+256MB of the ram is reserved as a scratch area. This area
+is *not* released: this region will be kept permanently
+reserved, so that it can act as a receptacle for a copy
+of the low 256MB in the case a crash does occur. See,
+however, "open issues" below, as to whether
+such a reserved region is really needed.
+
+Currently the dump will be copied from /proc/vmcore to a
+a new file upon user intervention. The starting address
+to be read and the range for each data point in provided
+in /sys/kernel/release_region.
+
+The tools to examine the dump will be same as the ones
+used for kdump.
+
+General notes:
+--------------
+Security: please note that there are potential security issues
+with any sort of dump mechanism. In particular, plaintext
+(unencrypted) data, and possibly passwords, may be present in
+the dump data. Userspace tools must take adequate precautions to
+preserve security.
+
+Open issues/ToDo:
+------------
+ o The various code paths that tell the hypervisor that a crash
+ occurred, vs. it simply being a normal reboot, should be
+ reviewed, and possibly clarified/fixed.
+
+ o Instead of using /sys/kernel, should there be a /sys/dump
+ instead? There is a dump_subsys being created by the s390 code,
+ perhaps the pseries code should use a similar layout as well.
+
+ o Is reserving a 256MB region really required? The goal of
+ reserving a 256MB scratch area is to make sure that no
+ important crash data is clobbered when the hypervisor
+ save low mem to the scratch area. But, if one could assure
+ that nothing important is located in some 256MB area, then
+ it would not need to be reserved. Something that can be
+ improved in subsequent versions.
+
+ o Still working the kdump team to integrate this with kdump,
+ some work remains but this would not affect the current
+ patches.
+
+ o Still need to write a shell script, to copy the dump away.
+ Currently I am parsing it manually.
- information on scheduling domains.
sched-nice-design.txt
- How and why the scheduler's nice levels are implemented.
+sched-rt-group.txt
+ - real-time group scheduling.
sched-stats.txt
- information on schedstats (Linux Scheduler Statistics).
starting low (CPOL=0) and data stabilized for sampling during the
trailing clock edge (CPHA=1), that's SPI mode 1.
+Note that the clock mode is relevant as soon as the chipselect goes
+active. So the master must set the clock to inactive before selecting
+a slave, and the slave can tell the chosen polarity by sampling the
+clock level when its select line goes active. That's why many devices
+support for example both modes 0 and 3: they don't care about polarity,
+and alway clock data in/out on rising clock edges.
+
How do these driver programming interfaces work?
------------------------------------------------
+ when bidirectional reads and writes start ... by how its
sequence of spi_transfer requests is arranged;
+ + which I/O buffers are used ... each spi_transfer wraps a
+ buffer for each transfer direction, supporting full duplex
+ (two pointers, maybe the same one in both cases) and half
+ duplex (one pointer is NULL) transfers;
+
+ optionally defining short delays after transfers ... using
- the spi_transfer.delay_usecs setting;
+ the spi_transfer.delay_usecs setting (this delay can be the
+ only protocol effect, if the buffer length is zero);
+ whether the chipselect becomes inactive after a transfer and
any delay ... by using the spi_transfer.cs_change flag;
__SPIN_LOCK_UNLOCKED()/__RW_LOCK_UNLOCKED() as appropriate for static
initialization.
+Most of the time, you can simply turn:
+
+ static spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+
+into:
+
+ static DEFINE_SPINLOCK(xxx_lock);
+
+Static structure member variables go from:
+
+ struct foo bar {
+ .lock = SPIN_LOCK_UNLOCKED;
+ };
+
+to:
+
+ struct foo bar {
+ .lock = __SPIN_LOCK_UNLOCKED(bar.lock);
+ };
+
+Declaration of static rw_locks undergo a similar transformation.
+
Dynamic initialization, when necessary, may be performed as
demonstrated below.
unaligned access to be corrected.
- Some architectures are not capable of unaligned memory access, but will
silently perform a different memory access to the one that was requested,
- resulting a a subtle code bug that is hard to detect!
+ resulting in a subtle code bug that is hard to detect!
It should be obvious from the above that if your code causes unaligned
memory accesses to happen, your code will not work correctly on certain
u32 value = get_unaligned((u32 *) data);
-These macros work work for memory accesses of any length (not just 32 bits as
+These macros work for memory accesses of any length (not just 32 bits as
in the examples above). Be aware that when compared to standard access of
aligned memory, using these macros to access unaligned memory can be costly in
terms of performance.
L: linux-m68k@lists.linux-m68k.org
S: Maintained
+AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
+P: David Howells
+M: dhowells@redhat.com
+L: linux-afs@lists.infradead.org
+S: Supported
+
AIO
P: Benjamin LaHaise
M: bcrl@kvack.org
L: linux-wireless@vger.kernel.org
L: ipw3945-devel@lists.sourceforge.net
W: http://intellinuxwireless.org
-T: git git://intellinuxwireless.org/repos/iwlwifi
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rchatre/iwlwifi-2.6.git
S: Supported
IOC3 ETHERNET DRIVER
S: Maintained
KPROBES
-P: Prasanna S Panchamukhi
-M: prasanna@in.ibm.com
P: Ananth N Mavinakayanahalli
M: ananth@in.ibm.com
P: Anil S Keshavamurthy
M: anil.s.keshavamurthy@intel.com
P: David S. Miller
M: davem@davemloft.net
+P: Masami Hiramatsu
+M: mhiramat@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 25
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc9
NAME = Funky Weasel is Jiggy wit it
# *DOCUMENTATION*
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-
+export KBUILD_BUILDHOST := $(SUBARCH)
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
else DMA_ADDRP is undefined. */
void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+ dma_addr_t *dma_addrp, gfp_t gfp)
{
void *cpu_addr;
long order = get_order(size);
- gfp_t gfp = GFP_ATOMIC;
+
+ gfp &= ~GFP_DMA;
try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
return cpu_addr;
}
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
time, when they all three were 0. */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+ bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd))
return;
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_lp);
it8152_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
- i = __ffs(bits_pd);
+ i = __ffs(bits_ld);
it8152_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
CALL(sys_mknodat)
/* 325 */ CALL(sys_fchownat)
CALL(sys_futimesat)
- CALL(sys_fstatat64)
+ CALL(ABI(sys_fstatat64, sys_oabi_fstatat64))
CALL(sys_unlinkat)
CALL(sys_renameat)
/* 330 */ CALL(sys_linkat)
* sys_stat64:
* sys_lstat64:
* sys_fstat64:
+ * sys_fstatat64:
*
* struct stat64 has different sizes and some members are shifted
* Compatibility wrappers are needed for them and provided below.
return error;
}
+asmlinkage long sys_oabi_fstatat64(int dfd,
+ char __user *filename,
+ struct oldabi_stat64 __user *statbuf,
+ int flag)
+{
+ struct kstat stat;
+ int error = -EINVAL;
+
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
+
+ if (flag & AT_SYMLINK_NOFOLLOW)
+ error = vfs_lstat_fd(dfd, filename, &stat);
+ else
+ error = vfs_stat_fd(dfd, filename, &stat);
+
+ if (!error)
+ error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+ return error;
+}
+
struct oabi_flock64 {
short l_type;
short l_whence;
new->start = start;
new->end = end;
new->name = name;
+ new->sibling = next;
new->flags = IORESOURCE_MEM;
*pprev = new;
return 0;
}
+#ifdef CONFIG_BUG
int is_valid_bugaddr(unsigned long pc)
{
unsigned short opcode;
return opcode == AVR32_BUG_OPCODE;
}
+#endif
asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
{
void __user *pc;
long code;
+#ifdef CONFIG_BUG
if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
enum bug_trap_type type;
die("Kernel BUG", regs, SIGKILL);
}
}
+#endif
local_irq_enable();
.section .trap.vector
.org TBR_TT_TRAP0 >> 2
.long system_call
- .rept 126
+ .rept 119
.long __entry_unsupported_trap
.endr
+
+ # userspace atomic op emulation, traps 120-126
+ .rept 7
+ .long __entry_atomic_op
+ .endr
+
.org TBR_TT_BREAK >> 2
.long __entry_debug_exception
movgs gr4,psr
jmpl @(gr5,gr0) ; call ill_insn(esfr1,epcr0,esr0)
+###############################################################################
+#
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+ .globl __entry_atomic_op
+__entry_atomic_op:
+ LEDS 0x6012
+ sethi.p %hi(atomic_operation),gr5
+ setlo %lo(atomic_operation),gr5
+ movsg esfr1,gr8
+ movsg epcr0,gr9
+ movsg esr0,gr10
+
+ # now that we've accessed the exception regs, we can enable exceptions
+ movsg psr,gr4
+ ori gr4,#PSR_ET,gr4
+ movgs gr4,psr
+ jmpl @(gr5,gr0) ; call atomic_operation(esfr1,epcr0,esr0)
+
###############################################################################
#
# handle media exception
#ifdef CONFIG_MMU
__sdram_base = 0x00000000 /* base address to which SDRAM relocated */
#else
-__sdram_base = 0xc0000000 /* base address to which SDRAM relocated */
+__sdram_base = __page_offset /* base address to which SDRAM relocated */
#endif
movgs gr14,lr
bar
- srli gr15,#28,gr5
- subicc gr5,#0xc,gr0,icc0
- beq icc0,#0,111f
- break
- nop
-111:
-
# jump to __switch_back or ret_from_fork as appropriate
# - move prev to GR8
movgs gr4,psr
force_sig_info(info.si_signo, &info, current);
} /* end illegal_instruction() */
+/*****************************************************************************/
+/*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+ unsigned long esr0)
+{
+ static DEFINE_SPINLOCK(atomic_op_lock);
+ unsigned long x, y, z, *p;
+ mm_segment_t oldfs;
+ siginfo_t info;
+ int ret;
+
+ y = 0;
+ z = 0;
+
+ oldfs = get_fs();
+ if (!user_mode(__frame))
+ set_fs(KERNEL_DS);
+
+ switch (__frame->tbr & TBR_TT) {
+ /* TIRA gr0,#120
+ * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+ */
+ case TBR_TT_ATOMIC_CMPXCHG32:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+ y = __frame->gr10;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ if (z != x)
+ goto done;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ if (z != x)
+ goto done2;
+
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#121
+ * u32 __atomic_kernel_xchg32(void *v, u32 new)
+ */
+ case TBR_TT_ATOMIC_XCHG32:
+ p = (unsigned long *) __frame->gr8;
+ y = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#122
+ * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_XOR:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x ^ z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#123
+ * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_OR:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x ^ z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#124
+ * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+ */
+ case TBR_TT_ATOMIC_AND:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = x & z;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#125
+ * int __atomic_user_sub_return(atomic_t *v, int i)
+ */
+ case TBR_TT_ATOMIC_SUB:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = z - x;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ /* TIRA gr0,#126
+ * int __atomic_user_add_return(atomic_t *v, int i)
+ */
+ case TBR_TT_ATOMIC_ADD:
+ p = (unsigned long *) __frame->gr8;
+ x = __frame->gr9;
+
+ for (;;) {
+ ret = get_user(z, p);
+ if (ret < 0)
+ goto error;
+
+ spin_lock_irq(&atomic_op_lock);
+
+ if (__get_user(z, p) == 0) {
+ y = z + x;
+ if (__put_user(y, p) == 0)
+ goto done2;
+ goto error2;
+ }
+
+ spin_unlock_irq(&atomic_op_lock);
+ }
+
+ default:
+ BUG();
+ }
+
+done2:
+ spin_unlock_irq(&atomic_op_lock);
+done:
+ if (!user_mode(__frame))
+ set_fs(oldfs);
+ __frame->gr5 = z;
+ __frame->gr9 = y;
+ return;
+
+error2:
+ spin_unlock_irq(&atomic_op_lock);
+error:
+ if (!user_mode(__frame))
+ set_fs(oldfs);
+ __frame->pc -= 4;
+
+ die_if_kernel("-- Atomic Op Error --\n");
+
+ info.si_signo = SIGSEGV;
+ info.si_code = SEGV_ACCERR;
+ info.si_errno = 0;
+ info.si_addr = (void *) __frame->pc;
+
+ force_sig_info(info.si_signo, &info, current);
+}
+
/*****************************************************************************/
/*
*
# Copyright (C) 1994 by Hamish Macdonald
#
+KBUILD_DEFCONFIG := amiga_defconfig
+
# override top level makefile
AS += -m68020
LDFLAGS := -m m68kelf
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:23 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-amiga"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
#
-# Device Drivers
+# Networking
#
+CONFIG_NET=y
#
-# Generic Driver Options
+# Networking options
#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
#
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
-# Parallel port support
+# Network testing
#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
CONFIG_PARPORT=m
# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
CONFIG_PARPORT_AMIGA=m
CONFIG_PARPORT_MFC3=m
# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
# CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
CONFIG_ARIADNE=m
CONFIG_A2065=m
CONFIG_HYDRA=m
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
-CONFIG_PLIP=m
+# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_KEYBOARD_AMIGA=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
+CONFIG_MOUSE_AMIGA=m
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_AMIGA=m
# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_A2232=m
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
CONFIG_FB_AMIGA=y
CONFIG_FB_AMIGA_OCS=y
CONFIG_FB_AMIGA_ECS=y
CONFIG_FB_AMIGA_AGA=y
CONFIG_FB_FM2=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:27 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-apollo"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_APOLLO_ELPLUS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
-# Token Ring devices
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_APOLLO_ELPLUS=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
#
-# TPM devices
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# I2C support
+# Sonics Silicon Backplane
#
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Dallas's 1-wire bus
+# Multifunction device drivers
#
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
#
-# Misc devices
+# Multimedia devices
#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Multimedia devices
+# Graphics support
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
#
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
#
-# CONFIG_DVB is not set
+CONFIG_FB_APOLLO=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:32 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-atari"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_STRAM_PROC=y
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_ATARILANCE=m
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
-# Ethernet (1000 Mbit)
+# IDE chipset support/bugfixes
#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
#
-# Ethernet (10000 Mbit)
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Wireless LAN (non-hamradio)
+# SCSI Transports
#
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ATARILANCE=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_ATARI=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_ATARI=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
+CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
+CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:37 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-bvme6000"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_BVME6000_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
-# Token Ring devices
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_BVME6000_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
#
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
#
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:41 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-hp300"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_MISC=m
CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_HPLANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
-# Token Ring devices
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_HPLANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_M68K_BEEP is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
#
# Hardware I/O ports
#
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
#
-# TPM devices
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# I2C support
+# Sonics Silicon Backplane
#
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Dallas's 1-wire bus
+# Multifunction device drivers
#
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
#
-# Misc devices
+# Multimedia devices
#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Multimedia devices
+# Graphics support
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
#
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
#
-# CONFIG_DVB is not set
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:45 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:14 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-mac"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
# CONFIG_M68060 is not set
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_MISC=m
# CONFIG_HEARTBEAT is not set
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_MAC_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
-CONFIG_MACMACE=y
-# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
#
-# Ethernet (1000 Mbit)
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_MAC_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
#
-# Ethernet (10000 Mbit)
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Wan interfaces
+# SCSI Transports
#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MAC_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_VALKYRIE=y
CONFIG_FB_MAC=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:50 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:17 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-mvme147"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME147_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Ethernet (10000 Mbit)
+# SCSI support type (disk, tape, CD-ROM)
#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
-# Token Ring devices
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Wireless LAN (non-hamradio)
+# SCSI Transports
#
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME147_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
#
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
#
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:53 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:19 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-mvme16x"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_MMU_MOTOROLA=y
# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME16x_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# Wan interfaces
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME16x_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
#
-# TPM devices
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# I2C support
+# Sonics Silicon Backplane
#
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
+# Multifunction device drivers
#
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
-# Digital Video Broadcasting Devices
+# Graphics support
#
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Graphics support
+# Display device support
#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
+CONFIG_SERIAL167=y
CONFIG_MVME162_SCC=y
CONFIG_SERIAL_CONSOLE=y
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:58 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:20 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-q40"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
CONFIG_M68040=y
CONFIG_M68060=y
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
+# Networking
#
+CONFIG_NET=y
#
-# Generic Driver Options
+# Networking options
#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
#
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
#
-# Parallel port support
+# IPv6: Netfilter Configuration
#
-# CONFIG_PARPORT is not set
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# Plug and Play support
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-# CONFIG_PNP is not set
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
#
-# Block devices
+# Network testing
#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
-# SCSI Transport Attributes
+# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_Q40KBD=m
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
CONFIG_FB_Q40=y
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:35:02 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:22 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+CONFIG_NO_DMA=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-sun3"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
#
CONFIG_M68020=y
CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_SINGLE_MEMORY_CHUNK=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
-CONFIG_SUN3_82586=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
-# Token Ring devices
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+CONFIG_SUN3_82586=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:35:06 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr 2 20:46:23 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
-CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION="-sun3x"
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform dependent setup
# CONFIG_M68040 is not set
# CONFIG_M68060 is not set
CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
#
# General setup
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m
CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
+CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
#
-# Ethernet (10 or 100Mbit)
+# Wireless
#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
-# Ethernet (1000 Mbit)
+# Device Drivers
#
#
-# Ethernet (10000 Mbit)
+# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
-# Token Ring devices
+# SCSI device support
#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
#
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
#
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
#
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# Hardware I/O ports
#
CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
#
-# Dallas's 1-wire bus
+# SPI support
#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Misc devices
+# Sonics Silicon Backplane
#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Multimedia devices
+# Multifunction device drivers
#
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia devices
#
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
#
-# InfiniBand support
+# Userspace I/O
#
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
# CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
+CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun 7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
# be 16kb aligned or the handling of the current variable will break.
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
-#core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ endif
+endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28) += -Iinclude/asm-mips/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
/* With some thought, we can probably use the mask to reduce the
* size of the table.
*/
-struct cpu_spec cpu_specs[] = {
- { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
- { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
- { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
- { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
- { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
- { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
- { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
- { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
- { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
- { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
- { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
- { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
- { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
- { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
- { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
- { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
- { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+ { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+ { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+ { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+ { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+ { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+ { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+ { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+ { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+ { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+ { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+ { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+ { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+ { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+ { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+ { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+ { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+ { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
void
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpupll, bclk = 1;
+ unsigned long prid, cpufreq, bclk = 1;
set_cpuspec();
sp = cur_cpu_spec[0];
board_setup(); /* board specific setup */
prid = read_c0_prid();
- cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
- printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+ if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+ cpufreq = 396;
+#endif
+ else
+ cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+ printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
bclk = sp->cpu_bclk;
if (bclk)
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+ } else
+ no_au1xxx_32khz = 1;
- cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
- AU1000_SRC_CLK;
- }
- else {
- /* The 32KHz oscillator isn't running, so assume there
- * isn't one and grab the processor speed from the PLL.
- * NOTE: some old silicon doesn't allow reading the PLL.
- */
+ /*
+ * On early Au1000, sys_cpupll was write-only. Since these
+ * silicon versions of Au1000 are not sold by AMD, we don't bend
+ * over backwards trying to determine the frequency.
+ */
+ if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+ cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+ cpu_speed = 396000000;
+#endif
+ else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
- no_au1xxx_32khz = 1;
- }
mips_hpt_frequency = cpu_speed;
// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
void board_reset(void)
{
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
#
CONFIG_MIPS=y
#
# Machine selection
#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
# CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
# CONFIG_SNI_RM is not set
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
CONFIG_SIBYTE_BCM1x80=y
CONFIG_SIBYTE_SB1xxx_SOC=y
# CONFIG_CPU_SB1_PASS_1 is not set
# CONFIG_SIBYTE_CFE_CONSOLE is not set
# CONFIG_SIBYTE_BUS_WATCHER is not set
# CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
CONFIG_CEVT_BCM1480=y
CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
CONFIG_BOOT_ELF32=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_MIPS32_R1 is not set
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_IRQ_PER_CPU=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
CONFIG_SMP=y
CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_NR_CPUS_DEFAULT_4=y
CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_48 is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_128 is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Bus options (PCI, PCMCIA, EISA, ISA, TC)
CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
CONFIG_PCI_DEBUG=y
CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
CONFIG_MIPS32_COMPAT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# Networking
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=m
# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=y
CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_TC86C001=m
# CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
#
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
#
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
#
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
-# Hardware Monitoring support
+# Multifunction device drivers
#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
#
-# USB support
+# Sound
#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
#
+# CONFIG_UIO is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
#
# Pseudo filesystems
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
CONFIG_CMDLINE=""
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SB1XXX_CORELIS is not set
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#include <asm/system.h>
#include <asm/gdb-stub.h>
#include <asm/inst.h>
-#include <asm/smp.h>
/*
* external low-level support routines
*epc = (unsigned long)async_breakpoint;
}
+#ifdef CONFIG_SMP
static void kgdb_wait(void *arg)
{
unsigned flags;
local_irq_restore(flags);
}
+#endif
/*
* GDB stub needs to call kgdb_wait on all processor with interrupts
#include <asm/time.h>
DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
/*
* Initialize the PIT timer.
{
plat_time_init();
- if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+ if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
init_mips_clocksource();
}
/* Find some VPE program space */
static void *alloc_progmem(unsigned long len)
{
+ void *addr;
+
#ifdef CONFIG_MIPS_VPE_LOADER_TOM
- /* this means you must tell linux to use less memory than you physically have */
- return pfn_to_kaddr(max_pfn);
+ /*
+ * This means you must tell Linux to use less memory than you
+ * physically have, for example by passing a mem= boot argument.
+ */
+ addr = pfn_to_kaddr(max_pfn);
+ memset(addr, 0, len);
#else
- // simple grab some mem for now
- return kmalloc(len, GFP_KERNEL);
+ /* simple grab some mem for now */
+ addr = kzalloc(len, GFP_KERNEL);
#endif
+
+ return addr;
}
static void release_progmem(void *ptr)
}
v->load_addr = alloc_progmem(mod.core_size);
- memset(v->load_addr, 0, mod.core_size);
+ if (!v->load_addr)
+ return -ENOMEM;
- printk("VPE loader: loading to %p\n", v->load_addr);
+ pr_info("VPE loader: loading to %p\n", v->load_addr);
if (relocate) {
for (i = 0; i < hdr->e_shnum; i++) {
#endif
}
+static void r4k__flush_cache_vmap(void)
+{
+ r4k_blast_dcache();
+}
+
+static void r4k__flush_cache_vunmap(void)
+{
+ r4k_blast_dcache();
+}
+
static inline void local_r4k_flush_cache_range(void * args)
{
struct vm_area_struct *vma = args;
PAGE_SIZE - 1);
else
shm_align_mask = PAGE_SIZE-1;
+
+ __flush_cache_vmap = r4k__flush_cache_vmap;
+ __flush_cache_vunmap = r4k__flush_cache_vunmap;
+
flush_cache_all = cache_noop;
__flush_cache_all = r4k___flush_cache_all;
flush_cache_mm = r4k_flush_cache_mm;
local_irq_restore(flags);
}
+static void tx39__flush_cache_vmap(void)
+{
+ tx39_blast_dcache();
+}
+
+static void tx39__flush_cache_vunmap(void)
+{
+ tx39_blast_dcache();
+}
+
static inline void tx39_flush_cache_all(void)
{
if (!cpu_has_dc_aliases)
switch (current_cpu_type()) {
case CPU_TX3912:
/* TX39/H core (writethru direct-map cache) */
+ __flush_cache_vmap = tx39__flush_cache_vmap;
+ __flush_cache_vunmap = tx39__flush_cache_vunmap;
flush_cache_all = tx39h_flush_icache_all;
__flush_cache_all = tx39h_flush_icache_all;
flush_cache_mm = (void *) tx39h_flush_icache_all;
write_c0_wired(0); /* set 8 on reset... */
/* board-dependent init code may set WBON */
+ __flush_cache_vmap = tx39__flush_cache_vmap;
+ __flush_cache_vunmap = tx39__flush_cache_vunmap;
+
flush_cache_all = tx39_flush_cache_all;
__flush_cache_all = tx39___flush_cache_all;
flush_cache_mm = tx39_flush_cache_mm;
unsigned long pfn);
void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+
/* MIPS specific cache operations */
void (*flush_cache_sigtramp)(unsigned long addr);
void (*local_flush_data_cache_page)(void * addr);
case CPU_R12000:
case CPU_R14000:
case CPU_4KC:
+ case CPU_4KEC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
static struct resource bcm1480_io_resource = {
.name = "BCM1480 PCI I/O",
- .start = 0x2c000000UL,
- .end = 0x2dffffffUL,
+ .start = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
.flags = IORESOURCE_IO,
};
.pci_ops = &bcm1480_pci_ops,
.mem_resource = &bcm1480_mem_resource,
.io_resource = &bcm1480_io_resource,
+ .io_offset = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
};
bcm1480_controller.io_map_base = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+ bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
set_io_port_base(bcm1480_controller.io_map_base);
isa_slot_offset = (unsigned long)
ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
static struct resource bcm1480ht_io_resource = {
.name = "BCM1480 HT I/O",
- .start = 0x00000000UL,
- .end = 0x01ffffffUL,
+ .start = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+ .end = A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
.flags = IORESOURCE_IO,
};
.io_resource = &bcm1480ht_io_resource,
.index = 1,
.get_busno = bcm1480ht_pcibios_get_busno,
+ .io_offset = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
};
static int __init bcm1480ht_pcibios_init(void)
{
- uint32_t cmdreg;
-
ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
- /*
- * See if the PCI bus has been configured by the firmware.
- */
- cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
- PCI_COMMAND));
- if (!(cmdreg & PCI_COMMAND_MASTER)) {
- printk("HT: Skipping HT probe. Bus is not initialized.\n");
- iounmap(ht_cfg_space);
- return 1; /* XXX */
- }
+ /* CFE doesn't always init all HT paths, so we always scan */
bcm1480ht_bus_status |= PCI_BUS_ENABLED;
ht_eoi_space = (unsigned long)
ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
4 * 1024 * 1024);
+ bcm1480ht_controller.io_map_base = (unsigned long)
+ ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+ bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
register_pci_controller(&bcm1480ht_controller);
bool
default y
+config GENERIC_GPIO
+ bool
+ help
+ Generic GPIO API support
+
config ARCH_NO_VIRT_TO_BUS
def_bool PPC64
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_KRETPROBES
+ select HAVE_LMB
config EARLY_PRINTK
bool
source kernel/Kconfig.preempt
source "fs/Kconfig.binfmt"
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
-config FORCE_MAX_ZONEORDER
- int
- depends on PPC64
- default "9" if PPC_64K_PAGES
- default "13"
-
config HUGETLB_PAGE_SIZE_VARIABLE
bool
depends on HUGETLB_PAGE
Don't change this unless you know what you are doing.
+config PHYP_DUMP
+ bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+ depends on PPC_PSERIES && EXPERIMENTAL
+ help
+ Hypervisor-assisted dump is meant to be a kdump replacement
+ offering robustness and speed not possible without system
+ hypervisor assistence.
+
+ If unsure, say "N"
+
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
while on hardware with such support, it will be used to map
normal application pages.
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ default "9" if PPC_64K_PAGES
+ default "13" if PPC64 && !PPC_64K_PAGES
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. For example, on 64-bit
+ systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES. Keep
+ this in mind when choosing a value for this option.
+
config PPC_SUBPAGE_PROT
bool "Support setting protections for 4k subpages"
depends on PPC_64K_PAGES
bool
select PPC_INDIRECT_PCI
+config 4xx_SOC
+ bool
+
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
default "0x00200000" if NOT_COHERENT_CACHE
-config BOOT_LOAD_BOOL
- bool "Set the boot link/load address"
- depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
- help
- This option allows you to set the initial load address of the zImage
- or zImage.initrd file. This can be useful if you are on a board
- which has a small amount of memory.
-
- Say N here unless you know what you are doing.
-
-config BOOT_LOAD
- hex "Link/load address for booting" if BOOT_LOAD_BOOL
- default "0x00400000" if 40x || 8xx || 8260
- default "0x01000000" if 44x
- default "0x00800000"
-
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
LDFLAGS_vmlinux := -Bstatic
-CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
-AFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=none -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH) -ffixed-r2 -mmultiple
-KBUILD_CPPFLAGS += $(CPPFLAGS-y)
-KBUILD_AFLAGS += $(AFLAGS-y)
-KBUILD_CFLAGS += -msoft-float -pipe $(CFLAGS-y)
+CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
+KBUILD_CPPFLAGS += -Iarch/$(ARCH)
+KBUILD_AFLAGS += -Iarch/$(ARCH)
+KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
-bootwrapper_install:
+bootwrapper_install %.dtb:
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
define archhelp
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
zlib := inffast.c inflate.c inftrees.c
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
fixed-head.S ep88xc.c ep405.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
- cuboot-warp.c cuboot-85xx-cpm2.c
+ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+ virtex405-head.S
src-boot := $(src-wlib) $(src-plat) empty.c
src-boot := $(addprefix $(obj)/, $(src-boot))
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += zImage.holly
-image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800
+image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
image-$(CONFIG_TAISHAN) += cuImage.taishan
image-$(CONFIG_KATMAI) += cuImage.katmai
image-$(CONFIG_WARP) += cuImage.warp
+image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_SBC8560) += cuImage.sbc8560
+image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
image-$(CONFIG_STORCENTER) += cuImage.storcenter
$(call if_changed,wrap,$*)
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
-$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
- $(call if_changed,wrap,$*,$(dtstree)/$*.dts)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+ $(call if_changed,wrap,$*,,$(obj)/$*.dtb)
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
# prefix
$(obj)/uImage: vmlinux $(wrapperbits)
$(call if_changed,wrap,uboot)
-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
- $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+ $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
+ $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
# anything not in $(targets)
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
- otheros.bld
+ otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
- dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
}
void bamboo_init(void *mac0, void *mac1)
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ibm4xx_denali_fixup_memsize();
- dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
}
void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
}
ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
ibm4xx_sdram_fixup_memsize();
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
- dt_fixup_mac_addresses(&bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
}
--- /dev/null
+/*
+ * Old U-boot compatibility for Yosemite
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void yosemite_fixups(void)
+{
+ unsigned long sysclk = 66666666;
+
+ ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+ ibm4xx_sdram_fixup_memsize();
+ ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+ dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+ dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ CUBOOT_INIT();
+ platform_ops.fixups = yosemite_fixups;
+ platform_ops.exit = ibm44x_dbcr_reset;
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
--- /dev/null
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,canyonlands";
+ compatible = "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460EX";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <2>;
+ num-rx-chans = <10>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460ex", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
reg = <8000 4000>;
};
};
+
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 fc000000 2000000>;
+
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 2000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+ };
};
};
EMAC0: ethernet@40000800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
zmii-channel = <0>;
};
EMAC1: ethernet@40000900 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
--- /dev/null
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,glacier";
+ compatible = "amcc,glacier", "amcc,canyonlands";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0e0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <a 4 b 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0f0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <10 4 11 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <20>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 6 4
+ /*RXEOB*/ 7 4
+ /*SERR*/ 3 4
+ /*TXDE*/ 4 4
+ /*RXDE*/ 5 4>;
+ desc-base-addr-high = <8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <b0000000 4 b0000000 50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ interrupts = <6 4>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1d 4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460gt", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601500 8>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef601600 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <ef601600 8>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601350 30>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <ef601450 30>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 10 4
+ /*Wake*/ 1 &UIC2 14 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 11 4
+ /*Wake*/ 1 &UIC2 15 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 12 4
+ /*Wake*/ 1 &UIC2 16 4>;
+ reg = <ef601100 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <10>;
+ cell-index = <2>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef601200 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0 1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0 &UIC2 13 4
+ /*Wake*/ 1 &UIC2 17 4>;
+ reg = <ef601200 70>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <18>;
+ cell-index = <3>;
+ max-frame-size = <2328>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rgmii";
+ phy-map = <00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <c 0ec00000 8 /* Config space access */
+ 0 0 0 /* no IACK cycles */
+ c 0ed00000 4 /* Special cycles */
+ c 0ec80000 100 /* Internal registers */
+ c 0ec80100 fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+ 01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0 3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0000 0 0 0>;
+ interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0>; /* port number */
+ reg = <d 00000000 20000000 /* Config space access */
+ c 08010000 00001000>; /* Registers */
+ dcr-reg = <100 020>;
+ sdr-base = <300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+ 01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <40 7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <1>; /* port number */
+ reg = <d 20000000 20000000 /* Config space access */
+ c 08011000 00001000>; /* Registers */
+ dcr-reg = <120 020>;
+ sdr-base = <340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+ 01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <80 bf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0000 0 0 7>;
+ interrupt-map = <
+ 0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+ 0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+ 0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+ 0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+ };
+ };
+};
#address-cells = <1>;
#size-cells = <1>;
model = "amcc,haleakala";
- compatible = "amcc,kilauea";
+ compatible = "amcc,haleakala", "amcc,kilauea";
dcr-parent = <&/cpus/cpu@0>;
aliases {
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "gmii";
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
--- /dev/null
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ model = "KSI8560";
+ compatible = "emerson,KSI8560";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8560@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x8000>; /* L1, 32K */
+ i-cache-size = <0x8000>; /* L1, 32K */
+ timebase-frequency = <0>; /* From U-boot */
+ bus-frequency = <0>; /* From U-boot */
+ clock-frequency = <0>; /* From U-boot */
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */
+ };
+
+ soc@fdf00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges = <0x00000000 0xfdf00000 0x00100000>;
+ bus-frequency = <0>; /* Fixed by bootwrapper */
+
+ memory-controller@2000 {
+ compatible = "fsl,8540-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x12 0x2>;
+ };
+
+ l2-cache-controller@20000 {
+ compatible = "fsl,8540-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <0x20>; /* 32 bytes */
+ cache-size = <0x40000>; /* L2, 256K */
+ interrupt-parent = <&MPIC>;
+ interrupts = <0x10 0x2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <0x2b 0x2>;
+ interrupt-parent = <&MPIC>;
+ dfsrr;
+ };
+
+ mdio@24520 { /* For TSECs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ PHY1: ethernet-phy@1 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+
+ PHY2: ethernet-phy@2 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet0: ethernet@24000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY1>;
+ };
+
+ enet1: ethernet@25000 {
+ device_type = "network";
+ model = "TSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+ interrupt-parent = <&MPIC>;
+ phy-handle = <&PHY2>;
+ };
+
+ MPIC: pic@40000 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0x40000 0x40000>;
+ device_type = "open-pic";
+ };
+
+ cpm@919c0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+ reg = <0x919c0 0x30>;
+ ranges;
+
+ muram@80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x80000 0x10000>;
+
+ data@0 {
+ compatible = "fsl,cpm-muram-data";
+ reg = <0x0 0x4000 0x9000 0x2000>;
+ };
+ };
+
+ brg@919f0 {
+ compatible = "fsl,mpc8560-brg",
+ "fsl,cpm2-brg",
+ "fsl,cpm-brg";
+ reg = <0x919f0 0x10 0x915f0 0x10>;
+ clock-frequency = <165000000>; /* 166MHz */
+ };
+
+ CPMPIC: pic@90c00 {
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ interrupts = <0x2e 0x2>;
+ interrupt-parent = <&MPIC>;
+ reg = <0x90c00 0x80>;
+ compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+ };
+
+ serial@91a00 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a00 0x20 0x88000 0x100>;
+ fsl,cpm-brg = <1>;
+ fsl,cpm-command = <0x800000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x28 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ serial@91a20 {
+ device_type = "serial";
+ compatible = "fsl,mpc8560-scc-uart",
+ "fsl,cpm2-scc-uart";
+ reg = <0x91a20 0x20 0x88100 0x100>;
+ fsl,cpm-brg = <2>;
+ fsl,cpm-command = <0x4a00000>;
+ current-speed = <0x1c200>;
+ interrupts = <0x29 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ };
+
+ mdio@90d00 { /* For FCCs */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,cpm2-mdio-bitbang";
+ reg = <0x90d00 0x14>;
+ fsl,mdio-pin = <24>;
+ fsl,mdc-pin = <25>;
+
+ PHY0: ethernet-phy@0 {
+ interrupt-parent = <&MPIC>;
+ reg = <0x0>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet2: ethernet@91300 {
+ device_type = "network";
+ compatible = "fsl,mpc8560-fcc-enet",
+ "fsl,cpm2-fcc-enet";
+ reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+ /* Mac address filled in by bootwrapper */
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ fsl,cpm-command = <0x12000300>;
+ interrupts = <0x20 0x8>;
+ interrupt-parent = <&CPMPIC>;
+ phy-handle = <&PHY0>;
+ };
+ };
+ };
+
+ localbus@fdf05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8560-localbus";
+ reg = <0xfdf05000 0x68>;
+
+ ranges = <0x0 0x0 0xe0000000 0x00800000
+ 0x4 0x0 0xe8080000 0x00080000>;
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <0x2>;
+
+ partition@0 {
+ label = "Primary Kernel";
+ reg = <0x0 0x180000>;
+ };
+ partition@180000 {
+ label = "Primary Filesystem";
+ reg = <0x180000 0x580000>;
+ };
+ partition@700000 {
+ label = "Monitor";
+ reg = <0x300000 0x100000>;
+ read-only;
+ };
+ };
+
+ cpld@4,0 {
+ compatible = "emerson,KSI8560-cpld";
+ reg = <0x4 0x0 0x80000>;
+ };
+ };
+
+
+ chosen {
+ linux,stdout-path = "/soc/cpm/serial@91a00";
+ };
+};
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0:ethernet-phy@1 {
+ device_type = "ethernet-phy";
+ reg = <1>;
+ };
};
ata@3a00 {
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,mpc5200b-mdio";
+ compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
reg = <3000 400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
interrupt-parent = <&mpc5200_pic>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
interrupt-parent = <&mpc5200_pic>;
};
-
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <f00 20>;
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@2 {
+ device_type = "ethernet-phy";
+ reg = <2>;
+ };
};
ata@3a00 {
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
+
+ rtc@68 {
+ device_type = "rtc";
+ compatible = "dallas,ds1339";
+ reg = <68>;
+ };
};
sram@8000 {
compatible = "fsl,lpb";
#address-cells = <2>;
#size-cells = <1>;
- ranges = <1 0 50000000 00010000
+ ranges = <0 0 ff000000 01000000
+ 1 0 50000000 00010000
2 0 50010000 00010000
3 0 50020000 00010000>;
compatible = "promess,pro_module_dio";
reg = <3 800 2>;
};
- };
- pci@f0000d00 {
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
- reg = <f0000d00 100>;
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
- c000 0 0 2 &mpc5200_pic 1 1 3
- c000 0 0 3 &mpc5200_pic 1 2 3
- c000 0 0 4 &mpc5200_pic 1 3 3
-
- c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
- c800 0 0 2 &mpc5200_pic 1 2 3
- c800 0 0 3 &mpc5200_pic 1 3 3
- c800 0 0 4 &mpc5200_pic 0 0 3>;
- clock-frequency = <0>; // From boot loader
- interrupts = <2 8 0 2 9 0 2 a 0>;
- interrupt-parent = <&mpc5200_pic>;
- bus-range = <0 0>;
- ranges = <42000000 0 80000000 80000000 0 20000000
- 02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 b0000000 0 01000000>;
+ // 16-bit flash device at LocalPlus Bus CS0
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 01000000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
};
};
};
sata@18000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
};
sata@19000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
};
sata@18000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x18000 0x1000>;
interrupts = <44 0x8>;
interrupt-parent = <&ipic>;
};
sata@19000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x19000 0x1000>;
interrupts = <45 0x8>;
interrupt-parent = <&ipic>;
};
sata@1a000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1a000 0x1000>;
interrupts = <46 0x8>;
interrupt-parent = <&ipic>;
};
sata@1b000 {
- compatible = "fsl,mpc8379-sata";
+ compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
reg = <0x1b000 0x1000>;
interrupts = <47 0x8>;
interrupt-parent = <&ipic>;
mode = "cpu";
};
- /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
- phy_type = "utmi";
+ phy_type = "ulpi";
};
mdio@24520 {
* if it can determine the exact PrPMC type.
*/
+/dts-v1/;
+
/ {
#address-cells = <1>;
#size-cells = <1>;
PowerPC,7447 {
device_type = "cpu";
reg = <0>;
- clock-frequency = <2bb0b140>; /* Default (733 MHz) */
- bus-frequency = <7f28155>; /* 133.333333 MHz */
- timebase-frequency = <1fca055>; /* 33.333333 MHz */
- i-cache-line-size = <20>;
- d-cache-line-size = <20>;
- i-cache-size = <8000>;
- d-cache-size = <8000>;
+ clock-frequency = <733333333>; /* Default */
+ bus-frequency = <133333333>;
+ timebase-frequency = <33333333>;
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
};
};
memory {
device_type = "memory";
- reg = <00000000 20000000>; /* Default (512MB) */
+ reg = <0x0 0x20000000>; /* Default (512MB) */
};
- mv64x60@f1000000 { /* Marvell Discovery */
+ system-controller@f1000000 { /* Marvell Discovery mv64360 */
#address-cells = <1>;
#size-cells = <1>;
model = "mv64360"; /* Default */
- compatible = "marvell,mv64x60";
- clock-frequency = <7f28155>; /* 133.333333 MHz */
- reg = <f1000000 00010000>;
- virtual-reg = <f1000000>;
- ranges = <88000000 88000000 01000000 /* PCI 0 I/O Space */
- 80000000 80000000 08000000 /* PCI 0 MEM Space */
- a0000000 a0000000 04000000 /* User FLASH */
- 00000000 f1000000 00010000 /* Bridge's regs */
- f2000000 f2000000 00040000>; /* Integrated SRAM */
+ compatible = "marvell,mv64360";
+ clock-frequency = <133333333>;
+ reg = <0xf1000000 0x10000>;
+ virtual-reg = <0xf1000000>;
+ ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+ 0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+ 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+ 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
flash@a0000000 {
device_type = "rom";
compatible = "direct-mapped";
- reg = <a0000000 4000000>; /* Default (64MB) */
+ reg = <0xa0000000 0x4000000>; /* Default (64MB) */
probe-type = "CFI";
bank-width = <4>;
- partitions = <00000000 00100000 /* RO */
- 00100000 00040001 /* RW */
- 00140000 00400000 /* RO */
- 00540000 039c0000 /* RO */
- 03f00000 00100000>; /* RO */
+ partitions = <0x00000000 0x00100000 /* RO */
+ 0x00100000 0x00040001 /* RW */
+ 0x00140000 0x00400000 /* RO */
+ 0x00540000 0x039c0000 /* RO */
+ 0x03f00000 0x00100000>; /* RO */
partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
};
#address-cells = <1>;
#size-cells = <0>;
device_type = "mdio";
- compatible = "marvell,mv64x60-mdio";
- ethernet-phy@1 {
+ compatible = "marvell,mv64360-mdio";
+ PHY0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <1>;
};
- ethernet-phy@3 {
+ PHY1: ethernet-phy@3 {
device_type = "ethernet-phy";
compatible = "broadcom,bcm5421";
- interrupts = <4c>; /* GPP 12 */
- interrupt-parent = <&/mv64x60/pic>;
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
reg = <3>;
};
};
- ethernet@2000 {
- reg = <2000 2000>;
- eth0 {
+ ethernet-group@2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-group";
+ reg = <0x2000 0x2000>;
+ ethernet@0 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
- block-index = <0>;
- interrupts = <20>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@1>;
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
- eth1 {
+ ethernet@1 {
device_type = "network";
- compatible = "marvell,mv64x60-eth";
- block-index = <1>;
- interrupts = <21>;
- interrupt-parent = <&/mv64x60/pic>;
- phy = <&/mv64x60/mdio/ethernet-phy@3>;
+ compatible = "marvell,mv64360-eth";
+ reg = <1>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
};
- sdma@4000 {
- device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
- reg = <4000 c18>;
- virtual-reg = <f1004000>;
- interrupt-base = <0>;
- interrupts = <24>;
- interrupt-parent = <&/mv64x60/pic>;
+ SDMA0: sdma@4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xf1004000>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
};
- sdma@6000 {
- device_type = "dma";
- compatible = "marvell,mv64x60-sdma";
- reg = <6000 c18>;
- virtual-reg = <f1006000>;
- interrupt-base = <0>;
- interrupts = <26>;
- interrupt-parent = <&/mv64x60/pic>;
+ SDMA1: sdma@6000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x6000 0xc18>;
+ virtual-reg = <0xf1006000>;
+ interrupts = <38>;
+ interrupt-parent = <&PIC>;
};
- brg@b200 {
- compatible = "marvell,mv64x60-brg";
- reg = <b200 8>;
+ BRG0: brg@b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
- bcr = <0>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
};
- brg@b208 {
- compatible = "marvell,mv64x60-brg";
- reg = <b208 8>;
+ BRG1: brg@b208 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb208 0x8>;
clock-src = <8>;
- clock-frequency = <7ed6b40>;
- current-speed = <2580>;
- bcr = <0>;
+ clock-frequency = <133333333>;
+ current-speed = <9600>;
};
- cunit@f200 {
- reg = <f200 200>;
+ CUNIT: cunit@f200 {
+ reg = <0xf200 0x200>;
};
- mpscrouting@b400 {
- reg = <b400 c>;
+ MPSCROUTING: mpscrouting@b400 {
+ reg = <0xb400 0xc>;
};
- mpscintr@b800 {
- reg = <b800 100>;
- virtual-reg = <f100b800>;
+ MPSCINTR: mpscintr@b800 {
+ reg = <0xb800 0x100>;
+ virtual-reg = <0xf100b800>;
};
- mpsc@8000 {
+ MPSC0: mpsc@8000 {
device_type = "serial";
- compatible = "marvell,mpsc";
- reg = <8000 38>;
- virtual-reg = <f1008000>;
- sdma = <&/mv64x60/sdma@4000>;
- brg = <&/mv64x60/brg@b200>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
- block-index = <0>;
- max_idle = <28>;
- chr_1 = <0>;
- chr_2 = <0>;
- chr_10 = <3>;
- mpcr = <0>;
- interrupts = <28>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xf1008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
};
- mpsc@9000 {
+ MPSC1: mpsc@9000 {
device_type = "serial";
- compatible = "marvell,mpsc";
- reg = <9000 38>;
- virtual-reg = <f1009000>;
- sdma = <&/mv64x60/sdma@6000>;
- brg = <&/mv64x60/brg@b208>;
- cunit = <&/mv64x60/cunit@f200>;
- mpscrouting = <&/mv64x60/mpscrouting@b400>;
- mpscintr = <&/mv64x60/mpscintr@b800>;
- block-index = <1>;
- max_idle = <28>;
- chr_1 = <0>;
- chr_2 = <0>;
- chr_10 = <3>;
- mpcr = <0>;
- interrupts = <2a>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x9000 0x38>;
+ virtual-reg = <0xf1009000>;
+ sdma = <&SDMA1>;
+ brg = <&BRG1>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <1>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
};
wdt@b410 { /* watchdog timer */
- compatible = "marvell,mv64x60-wdt";
- reg = <b410 8>;
- timeout = <a>; /* wdt timeout in seconds */
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
};
i2c@c000 {
device_type = "i2c";
- compatible = "marvell,mv64x60-i2c";
- reg = <c000 20>;
- virtual-reg = <f100c000>;
- freq_m = <8>;
- freq_n = <3>;
- timeout = <3e8>; /* 1000 = 1 second */
- retries = <1>;
- interrupts = <25>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xf100c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
};
- pic {
+ PIC: pic {
#interrupt-cells = <1>;
#address-cells = <0>;
- compatible = "marvell,mv64x60-pic";
- reg = <0000 88>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0 0x88>;
interrupt-controller;
};
mpp@f000 {
- compatible = "marvell,mv64x60-mpp";
- reg = <f000 10>;
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
};
gpp@f100 {
- compatible = "marvell,mv64x60-gpp";
- reg = <f100 20>;
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
};
pci@80000000 {
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
- compatible = "marvell,mv64x60-pci";
- reg = <0cf8 8>;
- ranges = <01000000 0 0 88000000 0 01000000
- 02000000 0 80000000 80000000 0 08000000>;
- bus-range = <0 ff>;
- clock-frequency = <3EF1480>;
- interrupt-pci-iack = <0c34>;
- interrupt-parent = <&/mv64x60/pic>;
- interrupt-map-mask = <f800 0 0 7>;
+ compatible = "marvell,mv64360-pci";
+ reg = <0xcf8 0x8>;
+ ranges = <0x01000000 0x0 0x0
+ 0x88000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000
+ 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0xc34>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0a */
- 5000 0 0 1 &/mv64x60/pic 50
- 5000 0 0 2 &/mv64x60/pic 51
- 5000 0 0 3 &/mv64x60/pic 5b
- 5000 0 0 4 &/mv64x60/pic 5d
+ 0x5000 0 0 1 &PIC 80
+ 0x5000 0 0 2 &PIC 81
+ 0x5000 0 0 3 &PIC 91
+ 0x5000 0 0 4 &PIC 93
/* IDSEL 0x0b */
- 5800 0 0 1 &/mv64x60/pic 5b
- 5800 0 0 2 &/mv64x60/pic 5d
- 5800 0 0 3 &/mv64x60/pic 50
- 5800 0 0 4 &/mv64x60/pic 51
+ 0x5800 0 0 1 &PIC 91
+ 0x5800 0 0 2 &PIC 93
+ 0x5800 0 0 3 &PIC 80
+ 0x5800 0 0 4 &PIC 81
/* IDSEL 0x0c */
- 6000 0 0 1 &/mv64x60/pic 5b
- 6000 0 0 2 &/mv64x60/pic 5d
- 6000 0 0 3 &/mv64x60/pic 50
- 6000 0 0 4 &/mv64x60/pic 51
+ 0x6000 0 0 1 &PIC 91
+ 0x6000 0 0 2 &PIC 93
+ 0x6000 0 0 3 &PIC 80
+ 0x6000 0 0 4 &PIC 81
/* IDSEL 0x0d */
- 6800 0 0 1 &/mv64x60/pic 5d
- 6800 0 0 2 &/mv64x60/pic 50
- 6800 0 0 3 &/mv64x60/pic 51
- 6800 0 0 4 &/mv64x60/pic 5b
+ 0x6800 0 0 1 &PIC 93
+ 0x6800 0 0 2 &PIC 80
+ 0x6800 0 0 3 &PIC 81
+ 0x6800 0 0 4 &PIC 91
>;
};
cpu-error@0070 {
- compatible = "marvell,mv64x60-cpu-error";
- reg = <0070 10 0128 28>;
- interrupts = <03>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x70 0x10 0x128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
};
sram-ctrl@0380 {
- compatible = "marvell,mv64x60-sram-ctrl";
- reg = <0380 80>;
- interrupts = <0d>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
};
pci-error@1d40 {
- compatible = "marvell,mv64x60-pci-error";
- reg = <1d40 40 0c28 4>;
- interrupts = <0c>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0xc28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
};
mem-ctrl@1400 {
- compatible = "marvell,mv64x60-mem-ctrl";
- reg = <1400 60>;
- interrupts = <11>;
- interrupt-parent = <&/mv64x60/pic>;
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
};
};
chosen {
bootargs = "ip=on";
- linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+ linux,stdout-path = &MPSC0;
};
};
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
};
EMAC1: ethernet@ef600f00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440epx", "ibm,emac4";
interrupt-parent = <&EMAC1>;
mal-tx-channel = <1>;
mal-rx-channel = <1>;
cell-index = <1>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
// FIXME: anything else?
};
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+ dcr-reg = <20 8 /* Internal SRAM DCR's */
+ 30 8>; /* L2 cache DCR's */
+ cache-line-size = <20>; /* 32 bytes */
+ cache-size = <40000>; /* L2, 256K */
+ interrupt-parent = <&UIC2>;
+ interrupts = <17 1>;
+ };
+
plb {
compatible = "ibm,plb-440gx", "ibm,plb4";
#address-cells = <2>;
reg = <40000790 8>;
};
+ TAH0: emac-tah@40000b50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000b50 30>;
+ };
+
+ TAH1: emac-tah@40000d50 {
+ compatible = "ibm,tah-440gx", "ibm,tah";
+ reg = <40000d50 30>;
+ };
EMAC0: ethernet@40000800 {
unused = <1>;
- linux,network-index = <2>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
};
EMAC1: ethernet@40000900 {
unused = <1>;
- linux,network-index = <3>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC1>;
};
EMAC2: ethernet@40000c00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
mal-tx-channel = <2>;
mal-rx-channel = <2>;
cell-index = <2>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
rgmii-channel = <0>;
zmii-device = <&ZMII0>;
zmii-channel = <2>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
};
EMAC3: ethernet@40000e00 {
- linux,network-index = <1>;
device_type = "network";
compatible = "ibm,emac-440gx", "ibm,emac4";
interrupt-parent = <&UIC2>;
mal-tx-channel = <3>;
mal-rx-channel = <3>;
cell-index = <3>;
- max-frame-size = <5dc>;
+ max-frame-size = <2328>;
rx-fifo-size = <1000>;
tx-fifo-size = <800>;
phy-mode = "rgmii";
rgmii-channel = <1>;
zmii-device = <&ZMII0>;
zmii-channel = <3>;
+ tah-device = <&TAH1>;
+ tah-channel = <0>;
};
ethernet@3000 {
device_type = "network";
compatible = "fsl,mpc5200-fec";
- reg = <3000 800>;
+ reg = <3000 400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <3000 400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+ interrupt-parent = <&mpc5200_pic>;
+
+ phy0: ethernet-phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
};
ata@3a00 {
};
i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
+
+ rtc@68 {
+ device_type = "rtc";
+ compatible = "dallas,ds1307";
+ reg = <68>;
+ };
};
sram@8000 {
};
};
+ lpb {
+ model = "fsl,lpb";
+ compatible = "fsl,lpb";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 fc000000 02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 02000000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ };
+ };
+
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
};
EMAC: ethernet@ef600800 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-405gp", "ibm,emac";
interrupt-parent = <&UIC0>;
};
EMAC0: ethernet@ef600e00 {
- linux,network-index = <0>;
device_type = "network";
compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
interrupt-parent = <&UIC1>;
--- /dev/null
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,yosemite";
+ compatible = "amcc,yosemite","amcc,bamboo";
+ dcr-parent = <&/cpus/cpu@0>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ serial2 = &UART2;
+ serial3 = &UART3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,440EP";
+ reg = <0>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ timebase-frequency = <0>; /* Filled in by zImage */
+ i-cache-line-size = <20>;
+ d-cache-line-size = <20>;
+ i-cache-size = <8000>;
+ d-cache-size = <8000>;
+ dcr-controller;
+ dcr-access-method = "native";
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0 0>; /* Filled in by zImage */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0c0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-440ep","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0d0 009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <1e 4 1f 4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-440ep";
+ dcr-reg = <00e 002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-440ep";
+ dcr-reg = <00c 002>;
+ };
+
+ plb {
+ compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+ dcr-reg = <010 2>;
+ };
+
+ DMA0: dma {
+ compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+ dcr-reg = <100 027>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+ dcr-reg = <180 62>;
+ num-tx-chans = <4>;
+ num-rx-chans = <2>;
+ interrupt-parent = <&MAL0>;
+ interrupts = <0 1 2 3 4>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+ /*RXEOB*/ 1 &UIC0 b 4
+ /*SERR*/ 2 &UIC1 0 4
+ /*TXDE*/ 3 &UIC1 1 4
+ /*RXDE*/ 4 &UIC1 2 4>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* Bamboo is oddball in the 44x world and doesn't use the ERPN
+ * bits.
+ */
+ ranges = <00000000 0 00000000 80000000
+ 80000000 0 80000000 80000000>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <7 4>;
+ clock-frequency = <0>; /* Filled in by zImage */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+ dcr-reg = <012 2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ interrupts = <5 1>;
+ interrupt-parent = <&UIC1>;
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600300 8>;
+ virtual-reg = <ef600300>;
+ clock-frequency = <0>; /* Filled in by zImage */
+ current-speed = <1c200>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0 4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600400 8>;
+ virtual-reg = <ef600400>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <1 4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600500 8>;
+ virtual-reg = <ef600500>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <3 4>;
+ status = "disabled";
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <ef600600 8>;
+ virtual-reg = <ef600600>;
+ clock-frequency = <0>;
+ current-speed = <0>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <4 4>;
+ status = "disabled";
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600700 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <2 4>;
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+ reg = <ef600800 14>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <7 4>;
+ };
+
+ spi@ef600900 {
+ compatible = "amcc,spi-440ep";
+ reg = <ef600900 6>;
+ interrupts = <8 4>;
+ interrupt-parent = <&UIC0>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+ reg = <ef600d00 c>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1c 4 1d 4>;
+ reg = <ef600e00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0 1>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <0>;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+ interrupt-parent = <&UIC1>;
+ interrupts = <1e 4 1f 4>;
+ reg = <ef600f00 70>;
+ local-mac-address = [000000000000];
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2 3>;
+ mal-rx-channel = <1>;
+ cell-index = <1>;
+ max-frame-size = <5dc>;
+ rx-fifo-size = <1000>;
+ tx-fifo-size = <800>;
+ phy-mode = "rmii";
+ phy-map = <00000000>;
+ zmii-device = <&ZMII0>;
+ zmii-channel = <1>;
+ };
+
+ usb@ef601000 {
+ compatible = "ohci-be";
+ reg = <ef601000 80>;
+ interrupts = <8 4 9 4>;
+ interrupt-parent = < &UIC1 >;
+ };
+ };
+
+ PCI0: pci@ec000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+ primary;
+ reg = <0 eec00000 8 /* Config space access */
+ 0 eed00000 4 /* IACK */
+ 0 eed00000 4 /* Special cycle */
+ 0 ef400000 40>; /* Internal registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed. Chip supports a second
+ * IO range but we don't use it for now
+ */
+ ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+ 01000000 0 00000000 0 e8000000 0 00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+ /* Bamboo has all 4 IRQ pins tied together per slot */
+ interrupt-map-mask = <f800 0 0 0>;
+ interrupt-map = <
+ /* IDSEL 1 */
+ 0800 0 0 0 &UIC0 1c 8
+
+ /* IDSEL 2 */
+ 1000 0 0 0 &UIC0 1b 8
+
+ /* IDSEL 3 */
+ 1800 0 0 0 &UIC0 1a 8
+
+ /* IDSEL 4 */
+ 2000 0 0 0 &UIC0 19 8
+ >;
+ };
+ };
+
+ chosen {
+ linux,stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
ibm4xx_sdram_fixup_memsize();
- dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+ dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+ dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
ebony_flashsel_fixup();
}
#define check_err(err) \
({ \
if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
- printf("%s():%d %s\n\r", __FUNCTION__, __LINE__, \
+ printf("%s():%d %s\n\r", __func__, __LINE__, \
fdt_strerror(err)); \
if (BAD_ERROR(err)) \
exit(); \
if (mpscintr_base == NULL)
goto err_out;
- n = getprop(devp, "block-index", &v, sizeof(v));
+ n = getprop(devp, "cell-index", &v, sizeof(v));
if (n != sizeof(v))
goto err_out;
reg_set = (int)v;
u32 v[2];
void *devp;
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
goto err_out;
if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
u32 v;
void *devp;
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
goto err_out;
if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
u32 v;
void *devp;
- devp = finddevice("/mv64x60/i2c");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
if (devp == NULL)
goto err_out;
if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
acc_bits);
/* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = finddevice("/mv64x60/pci@80000000");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
if (devp == NULL)
- fatal("Error: Missing /mv64x60/pci@80000000"
+ fatal("Error: Missing marvell,mv64360-pci"
" device tree node\n\r");
rc = getprop(devp, "ranges", v, sizeof(v));
if (rc != sizeof(v))
- fatal("Error: Can't find /mv64x60/pci@80000000/ranges"
+ fatal("Error: Can't find marvell,mv64360-pci ranges"
" property\n\r");
/* Get the cpu -> pci i/o & mem mappings from the device tree */
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
- fatal("Error: Missing /mv64x60 device tree node\n\r");
+ fatal("Error: Missing marvell,mv64360 device tree node\n\r");
enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
enables |= 0x0007fe00; /* Disable all cpu->pci windows */
setprop(devp, "model", model, l);
/* Set /cpus/PowerPC,7447/clock-frequency */
- devp = finddevice("/cpus/PowerPC,7447");
+ devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
if (devp == NULL)
- fatal("Error: Missing proper /cpus device tree node\n\r");
+ fatal("Error: Missing proper cpu device tree node\n\r");
v[0] = bip->core_speed;
setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
v[1] = bip->mem_size;
setprop(devp, "reg", v, sizeof(v));
- /* Update /mv64x60/model, if this is a mv64362 */
+ /* Update model, if this is a mv64362 */
if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
- devp = finddevice("/mv64x60");
+ devp = find_node_by_compatible(NULL, "marvell,mv64360");
if (devp == NULL)
- fatal("Error: Missing /mv64x60 device tree node\n\r");
+ fatal("Error: Missing marvell,mv64360"
+ " device tree node\n\r");
setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
}
/* Set User FLASH size */
- devp = finddevice("/mv64x60/flash@a0000000");
+ devp = find_node_by_compatible(NULL, "direct-mapped");
if (devp == NULL)
fatal("Error: Missing User FLASH device tree node\n\r");
rc = getprop(devp, "reg", v, sizeof(v));
/*
* __system_reset_overlay - The PS3 first stage entry.
*
- * The bootwraper build script copies the 0x100 bytes at symbol
- * __system_reset_overlay to offset 0x100 of the rom image.
+ * The bootwraper build script copies the 512 bytes at symbol
+ * __system_reset_overlay to offset 0x100 of the rom image. This symbol
+ * must occupy 512 or less bytes.
*
* The PS3 has a single processor with two threads.
*/
mfspr r3, 0x88
cntlzw. r3, r3
- li r4, 0
- li r5, 0
beq 1f
/* Secondary goes to __secondary_hold in kernel. */
mtctr r4
bctr
- /* Primary delays then goes to _zimage_start in wrapper. */
1:
+ /* Save the value at addr zero for a null pointer write check later. */
+
+ li r4, 0
+ lwz r3, 0(r4)
+
+ /* Primary delays then goes to _zimage_start in wrapper. */
+
or 31, 31, 31 /* db16cyc */
or 31, 31, 31 /* db16cyc */
mtctr r4
bctr
+ . = __system_reset_overlay + 512
+
/*
* __system_reset_kernel - Place holder for the kernel reset vector.
*
- * The bootwrapper build script copies 0x100 bytes from offset 0x100
+ * The bootwrapper build script copies 512 bytes from offset 0x100
* of the rom image to the symbol __system_reset_kernel. At runtime
- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
- * to ram address 0x100. This symbol must occupy 0x100 bytes.
+ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
+ * to ram address 0x100. This symbol must occupy 512 bytes.
*/
.globl __system_reset_kernel
__system_reset_kernel:
- . = __system_reset_kernel + 0x100
+ . = __system_reset_kernel + 512
#include "page.h"
#include "ops.h"
-extern s64 lv1_panic(u64 in_1);
-extern s64 lv1_get_logical_partition_id(u64 *out_1);
-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+extern int lv1_panic(u64 in_1);
+extern int lv1_get_logical_partition_id(u64 *out_1);
+extern int lv1_get_logical_ppe_id(u64 *out_1);
+extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
#ifdef DEBUG
* edit the command line passed to vmlinux (by setting /chosen/bootargs).
* The buffer is put in it's own section so that tools may locate it easier.
*/
+
static char cmdline[COMMAND_LINE_SIZE]
__attribute__((__section__("__builtin_cmdline")));
static int ps3_repository_read_rm_size(u64 *rm_size)
{
- s64 result;
+ int result;
u64 lpar_id;
u64 ppe_id;
u64 v2;
{
extern char __system_reset_kernel[];
- memcpy((void *)0x100, __system_reset_kernel, 0x100);
- flush_cache((void *)0x100, 0x100);
+ memcpy((void *)0x100, __system_reset_kernel, 512);
+ flush_cache((void *)0x100, 512);
}
-void platform_init(void)
+void platform_init(unsigned long null_check)
{
const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
void *chosen;
unsigned long ft_addr;
u64 rm_size;
+ unsigned long val;
console_ops.write = ps3_console_write;
platform_ops.exit = ps3_exit;
printf(" flat tree at 0x%lx\n\r", ft_addr);
+ val = *(unsigned long *)0;
+
+ if (val != null_check)
+ printf("null check failed: %lx != %lx\n\r", val, null_check);
+
((kernel_entry_t)0)(ft_addr, 0, NULL);
ps3_exit();
if (dt_is_compatible(devp, "ns16550"))
rc = ns16550_console_init(devp, &serial_cd);
- else if (dt_is_compatible(devp, "marvell,mpsc"))
+ else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
rc = mpsc_console_init(devp, &serial_cd);
else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
--- /dev/null
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ * tree or any platform configuration information.
+ * All data is extracted from an embedded device tree
+ * blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ * Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ const u32 *na, *ns, *reg, *timebase;
+ u64 memsize64;
+ int node, size, i;
+
+ /* Make sure FDT blob is sane */
+ if (fdt_check_header(_dtb_start) != 0)
+ fatal("Invalid device tree blob\n");
+
+ /* Find the #address-cells and #size-cells properties */
+ node = fdt_path_offset(_dtb_start, "/");
+ if (node < 0)
+ fatal("Cannot find root node\n");
+ na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+ if (!na || (size != 4))
+ fatal("Cannot find #address-cells property");
+ ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+ if (!ns || (size != 4))
+ fatal("Cannot find #size-cells property");
+
+ /* Find the memory range */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "memory", sizeof("memory"));
+ if (node < 0)
+ fatal("Cannot find memory node\n");
+ reg = fdt_getprop(_dtb_start, node, "reg", &size);
+ if (size < (*na+*ns) * sizeof(u32))
+ fatal("cannot get memory range\n");
+
+ /* Only interested in memory based at 0 */
+ for (i = 0; i < *na; i++)
+ if (*reg++ != 0)
+ fatal("Memory range is not based at address 0\n");
+
+ /* get the memsize and trucate it to under 4G on 32 bit machines */
+ memsize64 = 0;
+ for (i = 0; i < *ns; i++)
+ memsize64 = (memsize64 << 32) | *reg++;
+ if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+ memsize64 = 0xffffffff;
+
+ /* finally, setup the timebase */
+ node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+ "cpu", sizeof("cpu"));
+ if (!node)
+ fatal("Cannot find cpu node\n");
+ timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+ if (timebase && (size == 4))
+ timebase_period_ns = 1000000000 / *timebase;
+
+ /* Now we have the memory size; initialize the heap */
+ simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+ /* prepare the device tree and find the console */
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
ibm4xx_fixup_ebc_ranges("/plb/ebc");
walnut_flashsel_fixup();
- dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
+ dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
}
void platform_init(void)
--- /dev/null
+#include "ppc_asm.h"
+
+ .text
+ .global _zimage_start
+_zimage_start:
+
+ /* PPC errata 213: needed by Virtex-4 FX */
+ mfccr0 0
+ oris 0,0,0x50000000@h
+ mtccr0 0
+
+ /*
+ * Invalidate the data cache if the data cache is turned off.
+ * - The 405 core does not invalidate the data cache on power-up
+ * or reset but does turn off the data cache. We cannot assume
+ * that the cache contents are valid.
+ * - If the data cache is turned on this must have been done by
+ * a bootloader and we assume that the cache contents are
+ * valid.
+ */
+ mfdccr r9
+ cmplwi r9,0
+ bne 2f
+ lis r9,0
+ li r8,256
+ mtctr r8
+1: dccci r0,r9
+ addi r9,r9,0x20
+ bdnz 1b
+2: b _zimage_start_lib
*-mpc83*)
platformo=$object/cuboot-83xx.o
;;
- *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555)
+ *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
platformo=$object/cuboot-85xx-cpm2.o
;;
*-mpc85*|*-tqm8540|*-sbc85*)
platformo="$object/fixed-head.o $object/redboot-8xx.o"
binary=y
;;
+simpleboot-virtex405-*)
+ platformo="$object/virtex405-head.o $object/simpleboot.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
uboot_version="-n Linux-$version"
fi
+# physical offset of kernel image
+membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
+
case "$platform" in
uboot)
rm -f "$ofile"
- mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+ mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
exit 0
;;
ps3)
- # The ps3's loader supports loading gzipped binary images from flash
- # rom to addr zero. The loader enters the image at addr 0x100. A
- # bootwrapper overlay is use to arrange for the kernel to be loaded
- # to addr zero and to have a suitable bootwrapper entry at 0x100.
- # To construct the rom image, 0x100 bytes from offset 0x100 in the
- # kernel is copied to the bootwrapper symbol __system_reset_kernel.
- # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
- # then copied to offset 0x100. At runtime the bootwrapper program
- # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+ # The ps3's loader supports loading a gzipped binary image from flash
+ # rom to ram addr zero. The loader then enters the system reset
+ # vector at addr 0x100. A bootwrapper overlay is used to arrange for
+ # a binary image of the kernel to be at addr zero, and yet have a
+ # suitable bootwrapper entry at 0x100. To construct the final rom
+ # image 512 bytes from offset 0x100 is copied to the bootwrapper
+ # place holder at symbol __system_reset_kernel. The 512 bytes of the
+ # bootwrapper entry code at symbol __system_reset_overlay is then
+ # copied to offset 0x100. At runtime the bootwrapper program copies
+ # the data at __system_reset_kernel back to addr 0x100.
system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
overlay_dest="256"
- overlay_size="256"
+ overlay_size="512"
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:33:36 2008
+# Thu Mar 27 13:55:37 2008
#
# CONFIG_PPC64 is not set
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 14:02:06 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:09 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
# CONFIG_PQ2ADS is not set
CONFIG_8260=y
CONFIG_8272=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep8248e.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET_HAS_FCC=y
# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:13 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC86XADS is not set
# CONFIG_MPC885ADS is not set
CONFIG_PPC_EP88XC=y
+# CONFIG_PPC_ADDER875 is not set
#
# MPC8xx CPM Options
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep88xc.dts"
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:36:41 2008
+# Thu Mar 27 13:55:43 2008
#
CONFIG_PPC64=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 10:43:46 2008
+# Thu Mar 27 13:55:45 2008
#
CONFIG_PPC64=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Mon Feb 11 16:25:19 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_KSI8560=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_CPM=y
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_FSL_SOC=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FS_ENET=y
+# CONFIG_FS_ENET_HAS_SCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_CPM=y
+CONFIG_SERIAL_CPM_CONSOLE=y
+CONFIG_SERIAL_CPM_SCC1=y
+# CONFIG_SERIAL_CPM_SCC2 is not set
+# CONFIG_SERIAL_CPM_SCC3 is not set
+# CONFIG_SERIAL_CPM_SCC4 is not set
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:22 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
CONFIG_LINKSTATION=y
+# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=m
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-# CONFIG_IP_NF_MATCH_TOS is not set
CONFIG_IP_NF_MATCH_RECENT=m
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
#
# may also be needed; see USB_STORAGE Help for more information
#
+# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:28 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:11 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
CONFIG_MPC7448HPC2=y
# CONFIG_PPC_HOLLY is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:40:57 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:13 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_MPC8272_ADS=y
# CONFIG_PQ2FADS is not set
+# CONFIG_EP8248E is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_8272=y
CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc8272ads.dts"
CONFIG_ISA_DMA_API=y
#
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_QLA3XXX is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:35:55 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:14 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC831x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 20:02:25 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:15 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
CONFIG_MPC831x_RDB=y
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC831x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:33 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:51 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
CONFIG_MPC832x_MDS=y
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:35 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:16 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
CONFIG_MPC832x_RDB=y
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:37 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:17 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
CONFIG_MPC834x_ITX=y
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:18 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
CONFIG_MPC834x_ITX=y
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_NET_ETHERNET is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:41 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:56 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
CONFIG_MPC834x_MDS=y
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_FSL=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:43 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:57 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
CONFIG_MPC836x_MDS=y
-CONFIG_PPC_MPC836x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Oct 10 16:31:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:23 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
CONFIG_MPC837x_MDS=y
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC837x=y
+CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
-CONFIG_FSL_SERDES=y
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
CONFIG_BOOT_LOAD=0x00800000
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 20:04:39 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:24 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
CONFIG_MPC837x_RDB=y
+# CONFIG_SBC834x is not set
CONFIG_PPC_MPC837x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
CONFIG_MD=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
# CONFIG_NETDEV_10000 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:14:19 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:25 2008
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
CONFIG_SATA_FSL=y
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
CONFIG_UCC_GETH=y
+# CONFIG_UGETH_NAPI is not set
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_FSL=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
#
-# USB Gadget Support
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:44 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:25 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
CONFIG_MPC8540_ADS=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:46 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:03 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
# SoC Audio support for SuperH
#
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
#
# Open Sound System
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:48 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:27 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:50 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:05 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC85xx_MDS=y
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:52 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:06 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
# SoC Audio support for SuperH
#
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
#
# Open Sound System
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:54 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:30 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_IDEDISK is not set
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:12:07 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:08 2008
#
# CONFIG_PPC64 is not set
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
# SoC Audio support for SuperH
#
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
#
# Open Sound System
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:56 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:33 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8641_HPCN is not set
CONFIG_MPC8610_HPCD=y
CONFIG_MPC8610=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
# CONFIG_BLK_DEV_IDE is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:58 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:11 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC8641_HPCN=y
# CONFIG_MPC8610_HPCD is not set
CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC_I8259=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_FSL_ULI1575=y
#
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
CONFIG_PATA_ALI=y
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# Supported SAA7146 based PCI Adapters
#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
#
# Miscellaneous devices
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
# SoC Audio support for SuperH
#
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
#
# Open Sound System
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_EFS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:48:59 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
CONFIG_MPC86XADS=y
# CONFIG_MPC885ADS is not set
# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
#
# MPC8xx CPM Options
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
CONFIG_FIXED_PHY=y
-CONFIG_FIXED_MII_10_FDX=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:01 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_CPM1=y
# CONFIG_MPC86XADS is not set
CONFIG_MPC885ADS=y
# CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
#
# Freescale Ethernet driver platform-specific options
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
# CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
CONFIG_PPC_CPM_NEW_BINDING=y
# CONFIG_FSL_ULI1575 is not set
CONFIG_CPM=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc885ads.dts"
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 15 10:26:10 2008
+# Linux kernel version: 2.6.25-rc6
+# Tue Mar 25 10:25:48 2008
#
CONFIG_PPC64=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
CONFIG_PPC_PASEMI=y
# CONFIG_PPC_IBM_CELL_BLADE is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CPU Frequency drivers
#
CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
# CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PASEMI=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
# CONFIG_MTD_ONENAND is not set
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_PASEMI_MAC=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# SoC Audio support for SuperH
#
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
#
# Open Sound System
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:05:14 2008
+# Thu Mar 27 13:56:21 2008
#
# CONFIG_PPC64 is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 08:46:44 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EP405=y
+CONFIG_KILAUEA=y
+CONFIG_MAKALU=y
+CONFIG_WALNUT=y
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+CONFIG_405GP=y
+CONFIG_405EX=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_OF_RTC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:57:35 2008
+# Linux kernel version: 2.6.25-rc6
+# Sat Apr 5 09:35:48 2008
#
# CONFIG_PPC64 is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_PPC4xx_PCI_EXPRESS=y
#
CONFIG_KATMAI=y
CONFIG_RAINIER=y
CONFIG_WARP=y
+CONFIG_CANYONLANDS=y
+CONFIG_YOSEMITE=y
CONFIG_440EP=y
CONFIG_440EPX=y
CONFIG_440GRX=y
CONFIG_440GP=y
CONFIG_440GX=y
CONFIG_440SPe=y
+CONFIG_460EX=y
CONFIG_IBM440EP_ERR42=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
#
CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:06:28 2008
+# Thu Mar 27 13:56:24 2008
#
CONFIG_PPC64=y
# CONFIG_CGROUP_NS is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:39:18 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:36 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
CONFIG_PPC_82xx=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_MPC8272_ADS is not set
CONFIG_PQ2FADS=y
+# CONFIG_EP8248E is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="pq2fads.dts"
CONFIG_ISA_DMA_API=y
#
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# Advanced setup
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_QLA3XXX is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec 6 16:49:11 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:15 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_EMBEDDED6xx=y
# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
# CONFIG_MPC7448HPC2 is not set
# CONFIG_PPC_HOLLY is not set
CONFIG_PPC_PRPMC2800=y
CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="prpmc2800.dts"
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:08:01 2008
+# Thu Mar 27 13:56:28 2008
#
CONFIG_PPC64=y
CONFIG_CGROUP_NS=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_RESOURCE_COUNTERS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:54:27 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:38 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_83xx=y
CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_82xx is not set
CONFIG_PPC_83xx=y
# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
# CONFIG_MPC832x_MDS is not set
# CONFIG_MPC832x_RDB is not set
# CONFIG_MPC834x_MDS is not set
# CONFIG_MPC834x_ITX is not set
# CONFIG_MPC836x_MDS is not set
# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
CONFIG_SBC834x=y
-CONFIG_MPC834x=y
+CONFIG_PPC_MPC834x=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
# CONFIG_GFAR_NAPI is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_HIDRAW is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:19:12 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Wed Jan 23 14:59:20 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
CONFIG_SBC8560=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
CONFIG_ISA_DMA_API=y
#
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SMSC_PHY is not set
CONFIG_BROADCOM_PHY=y
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
CONFIG_GIANFAR=y
CONFIG_GFAR_NAPI=y
CONFIG_NETDEV_10000=y
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
# CONFIG_PPC_EARLY_DEBUG_CPM is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 8 09:33:54 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:19 2008
#
# CONFIG_PPC64 is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
# CONFIG_PPC_86xx is not set
CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
#
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="storcenter.dts"
CONFIG_ISA_DMA_API=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 02:02:30 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:42 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_STX_GP3=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="stx_gp3_8560.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
#
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# PCI IDE chipsets support
#
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
# CONFIG_BLK_DEV_IDEDMA is not set
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
#
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:32:05 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:43 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8541 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8540.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:31:28 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_TQM8541=y
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8541.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:15:24 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8541 is not set
CONFIG_TQM8555=y
# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8555.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 23:50:42 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:45 2008
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
-CONFIG_85xx=y
CONFIG_E500=y
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
#
# Platform support
#
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_TQM8541 is not set
# CONFIG_TQM8555 is not set
CONFIG_TQM8560=y
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8560.dts"
CONFIG_ISA_DMA_API=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
#
# User Modules And Translation Layers
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
# CONFIG_TR is not set
#
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
#
# Miscellaneous I2C Chip support
#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
#
# Userspace I/O
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
# CONFIG_KGDB_CONSOLE is not set
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
CONFIG_PPC_LIB_RHEAP=y
#ifdef CONFIG_PPC64
#include <linux/time.h>
#include <linux/hardirq.h>
-#else
-#include <linux/ptrace.h>
#endif
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/hvcall.h>
#endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iseries/alpaca.h>
+#endif
#define DEFINE(sym, val) \
asm volatile("\n->" #sym " %0 " #val : : "i" (val))
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
- DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
#endif /* CONFIG_PPC64 */
DEFINE(KSP, offsetof(struct thread_struct, ksp));
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
- DEFINE(PT_PTRACED, PT_PTRACED);
#endif
#ifdef CONFIG_SPE
DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET));
DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START));
DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
+
+ /* alpaca */
+ DEFINE(ALPACA_SIZE, sizeof(struct alpaca));
#endif
DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
#include <linux/string.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/lmb.h>
#include <asm/sections.h>
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
#include <asm/io.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/udbg.h>
* Valentine Barshak <vbarshak@ru.mvista.com>
* MontaVista Software, Inc (c) 2007
*
- * Based on cpu_setup_6xx code by
+ * Based on cpu_setup_6xx code by
* Benjamin Herrenschmidt <benh@kernel.crashing.org>
*
* This program is free software; you can redistribute it and/or
bl __fixup_440A_mcheck
mtlr r4
blr
+_GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
+ b __init_fpu_44x
_GLOBAL(__setup_cpu_440gx)
_GLOBAL(__setup_cpu_440spe)
b __fixup_440A_mcheck
extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
.machine_check = machine_check_440A,
.platform = "ppc440",
},
+ { /* 460EX */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020002,
+ .cpu_name = "460EX",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460ex,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
+ { /* 460GT */
+ .pvr_mask = 0xffff0002,
+ .pvr_value = 0x13020000,
+ .cpu_name = "460GT",
+ .cpu_features = CPU_FTRS_44X,
+ .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ .cpu_setup = __setup_cpu_460gt,
+ .machine_check = machine_check_440A,
+ .platform = "ppc440",
+ },
#endif /* CONFIG_44x */
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_E200
*t = *s;
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
#if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
- /* ppc64 and booke expect identify_cpu to also call
+ /* ppc64 and booke expect identify_cpu to also call
* setup_cpu for that processor. I will consolidate
* that at a later time, for now, just use #ifdef.
* we also don't need to PTRRELOC the function pointer
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/types.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/machdep.h>
#include <asm/kexec.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/smp.h>
#include <asm/system.h>
#include <linux/crash_dump.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/firmware.h>
#include <asm/uaccess.h>
/* we haven't used ctr or xer or lr */
b fast_exception_return
-/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
mtlr r10
andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_slb
+ beq- 2f
.machine push
.machine "power4"
rfid
b . /* prevent speculative execution */
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+ b unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+ mfspr r11,SPRN_SRR0
+ clrrdi r10,r13,32
+ LOAD_HANDLER(r10,unrecov_slb)
+ mtspr SPRN_SRR0,r10
+ mfmsr r10
+ ori r10,r10,MSR_IR|MSR_DR|MSR_RI
+ mtspr SPRN_SRR1,r10
+ rfid
+ b .
+
unrecov_slb:
EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
DISABLE_INTS
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
ori r4,r4,MSR_EE
+ li r8,1
+ stb r8,PACAHARDIRQEN(r13)
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
- stb r7,PACASOFTIRQEN(r13)
stb r7,PACAHARDIRQEN(r13)
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+ stb r7,PACASOFTIRQEN(r13)
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
- /* ptr to current */
- LOAD_REG_IMMEDIATE(r4, init_task)
- std r4,PACACURRENT(r13)
-
/* Load the TOC */
ld r2,PACATOC(r13)
std r1,PACAKSAVE(r13)
#ifdef CONFIG_PPC_ISERIES
BEGIN_FW_FTR_SECTION
mfmsr r5
- ori r5,r5,MSR_EE /* Hard Enabled */
+ ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/
mtmsrd r5
+ li r5,1
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
-BEGIN_FW_FTR_SECTION
- stb r5,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+ stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */
- bl .start_kernel
+ bl .start_kernel
/* Not reached */
BUG_OPCODE
mr r29,r5
mr r28,r6
mr r27,r7
+ li r25,0 /* phys kernel start (low) */
li r24,0 /* CPU number */
+ li r23,0 /* phys kernel start (high) */
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
mtspr SPRN_MAS0,r7
tlbre
- /* Just modify the entry ID, EPN and RPN for the temp mapping */
+ /* grab and fixup the RPN */
+ mfspr r6,SPRN_MAS1 /* extract MAS1[SIZE] */
+ rlwinm r6,r6,25,27,30
+ li r8,-1
+ addi r6,r6,10
+ slw r6,r8,r6 /* convert to mask */
+
+ bl 1f /* Find our address */
+1: mflr r7
+
+ mfspr r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r23,SPRN_MAS7
+#endif
+ and r8,r6,r8
+ subfic r9,r6,-4096
+ and r9,r9,r7
+
+ or r25,r8,r9
+ ori r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+ /* Just modify the entry ID and EPN for the temp mapping */
lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r6
mfspr r6,SPRN_MAS2
- lis r7,PHYSICAL_START@h
+ li r7,0 /* temp EPN = 0 */
rlwimi r7,r6,0,20,31
mtspr SPRN_MAS2,r7
- mfspr r6,SPRN_MAS3
- rlwimi r7,r6,0,20,31
- mtspr SPRN_MAS3,r7
+ mtspr SPRN_MAS3,r8
tlbwe
xori r6,r4,1
ori r6,r6,PAGE_OFFSET@l
rlwimi r6,r7,0,20,31
mtspr SPRN_MAS2,r6
- li r7,(MAS3_SX|MAS3_SW|MAS3_SR)
- mtspr SPRN_MAS3,r7
+ mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
ret = ibmebus_create_device(child);
if (ret) {
printk(KERN_ERR "%s: failed to create device (%i)",
- __FUNCTION__, ret);
+ __func__, ret);
of_node_put(child);
break;
}
if (bus_find_device(&ibmebus_bus_type, NULL, path,
ibmebus_match_path)) {
printk(KERN_WARNING "%s: %s has already been probed\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -EEXIST;
goto out;
}
of_node_put(dn);
} else {
printk(KERN_WARNING "%s: no such device node: %s\n",
- __FUNCTION__, path);
+ __func__, path);
rc = -ENODEV;
}
return count;
} else {
printk(KERN_WARNING "%s: %s not on the bus\n",
- __FUNCTION__, path);
+ __func__, path);
kfree(path);
return -ENODEV;
err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
if (err) {
printk(KERN_ERR "%s: failed to register IBM eBus.\n",
- __FUNCTION__);
+ __func__);
return err;
}
err = device_register(&ibmebus_bus_device);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
bus_unregister(&ibmebus_bus_type);
return err;
unsigned int order;
if (!tbl || !tbl->it_map) {
- printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
node_name);
return;
}
for (i = 0; i < (tbl->it_size/64); i++) {
if (tbl->it_map[i] != 0) {
printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
- __FUNCTION__, node_name);
+ __func__, node_name);
break;
}
}
*/
if (local_paca->lppaca_ptr->int_dword.any_int)
iseries_handle_interrupts();
- return;
}
/*
handler = &__do_IRQ;
irqtp->task = curtp->task;
irqtp->flags = 0;
+
+ /* Copy the softirq bits in preempt_count so that the
+ * softirq checks work in the hardirq context.
+ */
+ irqtp->preempt_count =
+ (irqtp->preempt_count & ~SOFTIRQ_MASK) |
+ (curtp->preempt_count & SOFTIRQ_MASK);
+
call_handle_irq(irq, desc, irqtp, handler);
irqtp->task = NULL;
+
+
+ /* Set any flag that may have been set on the
+ * alternate stack
+ */
if (irqtp->flags)
set_bits(irqtp->flags, &curtp->flags);
} else
memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
tp = softirq_ctx[i];
tp->cpu = i;
- tp->preempt_count = SOFTIRQ_OFFSET;
+ tp->preempt_count = 0;
memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
tp = hardirq_ctx[i];
* (size depending on dev->n_addr_cells)
* cell 5: the size of the range
*/
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
range++;
rlen -= sizeof(struct isa_range);
if (rlen < sizeof(struct isa_range))
goto inval_range;
}
- if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
+ if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
goto inval_range;
isa_addr = range->isa_addr.a_lo;
*/
if ((pci_addr != 0) || (isa_addr != 0)) {
printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
- __FUNCTION__);
+ __func__);
return;
}
unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!local_buffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
return;
}
if (call_status != 0) {
printk(KERN_INFO
"%s %s Error calling get-system-parameter (0x%x)\n",
- __FILE__, __FUNCTION__, call_status);
+ __FILE__, __func__, call_status);
} else {
int splpar_strlen;
int idx, w_idx;
char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!workbuffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
- __FILE__, __FUNCTION__, __LINE__);
+ __FILE__, __func__, __LINE__);
kfree(local_buffer);
return;
}
current_weight = (resource >> 5 * 8) & 0xFF;
pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
- __FUNCTION__, current_entitled, current_weight);
+ __func__, current_entitled, current_weight);
pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
- __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+ __func__, *new_entitled_ptr, *new_weight_ptr);
retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
*new_weight_ptr);
retval = -EINVAL;
} else {
printk(KERN_WARNING "%s: received unknown hv return code %ld",
- __FUNCTION__, retval);
+ __func__, retval);
retval = -EIO;
}
#include <linux/kexec.h>
#include <linux/reboot.h>
#include <linux/threads.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
#include <asm/ptrace.h>
#include <asm/page.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/mmu.h>
extern unsigned long __toc_start;
/*
- * iSeries structure which the hypervisor knows about - this structure
+ * The structure which the hypervisor knows about - this structure
* should not cross a page boundary. The vpa_init/register_vpa call
* is now known to fail if the lppaca structure crosses a page
- * boundary. The lppaca is also used on POWER5 pSeries boxes. The
- * lppaca is 640 bytes long, and cannot readily change since the
- * hypervisor knows its layout, so a 1kB alignment will suffice to
- * ensure that it doesn't cross a page boundary.
+ * boundary. The lppaca is also used on legacy iSeries and POWER5
+ * pSeries boxes. The lppaca is 640 bytes long, and cannot readily
+ * change since the hypervisor knows its layout, so a 1kB alignment
+ * will suffice to ensure that it doesn't cross a page boundary.
*/
struct lppaca lppaca[] = {
[0 ... (NR_CPUS-1)] = {
* processors. The processor VPD array needs one entry per physical
* processor (not thread).
*/
-#define PACA_INIT_COMMON(number) \
+#define PACA_INIT(number) \
+{ \
.lppaca_ptr = &lppaca[number], \
.lock_token = 0x8000, \
.paca_index = (number), /* Paca Index */ \
.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
.hw_cpu_id = 0xffff, \
- .slb_shadow_ptr = &slb_shadow[number],
-
-#ifdef CONFIG_PPC_ISERIES
-#define PACA_INIT_ISERIES(number) \
- .reg_save_ptr = &iseries_reg_save[number],
-
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
- PACA_INIT_ISERIES(number) \
+ .slb_shadow_ptr = &slb_shadow[number], \
+ .__current = &init_task, \
}
-#else
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number) \
-}
-
-#endif
-
struct paca_struct paca[] = {
PACA_INIT(0),
#if NR_CPUS > 1
extern void single_step_exception(struct pt_regs *regs);
extern int sys_sigreturn(struct pt_regs *regs);
-EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
EXPORT_SYMBOL(strcat);
EXPORT_SYMBOL(strlen);
EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
EXPORT_SYMBOL(__mtdcr);
EXPORT_SYMBOL(__mfdcr);
#endif
+EXPORT_SYMBOL(empty_zero_page);
}
#endif /* CONFIG_SMP */
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
int set_dabr(unsigned long dabr)
{
+ __get_cpu_var(current_dabr) = dabr;
+
#ifdef CONFIG_PPC_MERGE /* XXX for now */
if (ppc_md.set_dabr)
return ppc_md.set_dabr(dabr);
DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
#endif
-static DEFINE_PER_CPU(unsigned long, current_dabr);
-
struct task_struct *__switch_to(struct task_struct *prev,
struct task_struct *new)
{
#endif /* CONFIG_SMP */
- if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+ if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
set_dabr(new->thread.dabr);
- __get_cpu_var(current_dabr) = new->thread.dabr;
- }
new_thread = &new->thread;
old_thread = ¤t->thread;
flush_spe_to_thread(current);
error = do_execve(filename, (char __user * __user *) a1,
(char __user * __user *) a2, regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
return error;
#include <linux/kexec.h>
#include <linux/debugfs.h>
#include <linux/irq.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
-#include <asm/lmb.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/pSeries_reconfig.h>
#include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
#include <asm/kexec.h>
#ifdef DEBUG
* The device tree may be allocated beyond our memory limit, or inside the
* crash kernel region for kdump. If so, move it out of the way.
*/
-static void move_device_tree(void)
+static void __init move_device_tree(void)
{
unsigned long start, size;
void *p;
#endif
}
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+ unsigned long tmp;
+
+ if (phyp_dump_info->reserve_bootvar)
+ return phyp_dump_info->reserve_bootvar;
+
+ /* divide by 20 to get 5% of value */
+ tmp = lmb_end_of_DRAM();
+ do_div(tmp, 20);
+
+ /* round it down in multiples of 256 */
+ tmp = tmp & ~0x0FFFFFFFUL;
+
+ return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+ unsigned long base, size;
+ unsigned long variable_reserve_size;
+
+ if (!phyp_dump_info->phyp_dump_configured) {
+ printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+ return;
+ }
+
+ if (!phyp_dump_info->phyp_dump_at_boot) {
+ printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+ return;
+ }
+
+ variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+ if (phyp_dump_info->phyp_dump_is_active) {
+ /* Reserve *everything* above RMR.Area freed by userland tools*/
+ base = variable_reserve_size;
+ size = lmb_end_of_DRAM() - base;
+
+ /* XXX crashed_ram_end is wrong, since it may be beyond
+ * the memory_limit, it will need to be adjusted. */
+ lmb_reserve(base, size);
+
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ } else {
+ size = phyp_dump_info->cpu_state_size +
+ phyp_dump_info->hpte_region_size +
+ variable_reserve_size;
+ base = lmb_end_of_DRAM() - size;
+ lmb_reserve(base, size);
+ phyp_dump_info->init_reserve_start = base;
+ phyp_dump_info->init_reserve_size = size;
+ }
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */
+
+
void __init early_init_devtree(void *params)
{
DBG(" -> early_init_devtree(%p)\n", params);
of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
#endif
+#ifdef CONFIG_PHYP_DUMP
+ /* scan tree to see if dump occured during last boot */
+ of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
/* Retrieve various informations from the /chosen node of the
* device-tree, including the platform type, initrd location and
* size, TCE reserve, and more ...
reserve_kdump_trampoline();
reserve_crashkernel();
early_reserve_mem();
+ phyp_dump_reserve_mem();
lmb_enforce_memory_limit(memory_limit);
lmb_analyze();
if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
+ /* CODEGEN,description is exposed in /proc/cpuinfo so
+ fix that too */
+ rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
+ if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
+ prom_setprop(node, "/", "CODEGEN,description",
+ "Efika 5200B PowerPC System",
+ sizeof("Efika 5200B PowerPC System"));
+
/* Fixup bestcomm interrupts property */
node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
if (PHANDLE_VALID(node)) {
#include <linux/smp.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/rtas.h>
#include <asm/system.h>
#include <asm/delay.h>
#include <asm/uaccess.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include <asm/syscalls.h>
#include <asm/smp.h>
break;
default:
printk(KERN_ERR "%s: unexpected RTAS error %d\n",
- __FUNCTION__, rtas_rc);
+ __func__, rtas_rc);
rc = -ERANGE;
break;
}
/* Enforce exclusive open with use count of PDE */
spin_lock(&flash_file_open_lock);
- if (atomic_read(&dp->count) > 1) {
+ if (atomic_read(&dp->count) > 2) {
spin_unlock(&flash_file_open_lock);
return -EBUSY;
}
rtas_block_ctor);
if (!flash_block_cache) {
printk(KERN_ERR "%s: failed to create block cache\n",
- __FUNCTION__);
+ __func__);
rc = -ENOMEM;
goto cleanup;
}
return 0;
}
-static int of_device_available(struct device_node * dn)
-{
- const char *status;
-
- status = of_get_property(dn, "status", NULL);
-
- if (!status)
- return 1;
-
- if (!strcmp(status, "okay"))
- return 1;
-
- return 0;
-}
-
int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
{
int returnval = -1;
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_read_config(pdn, where, size, val);
}
for (dn = busdn->child; dn; dn = dn->sibling) {
struct pci_dn *pdn = PCI_DN(dn);
if (pdn && pdn->devfn == devfn
- && of_device_available(dn))
+ && of_device_is_available(dn))
return rtas_write_config(pdn, where, size, val);
}
return PCIBIOS_DEVICE_NOT_FOUND;
res = b->resource[0];
if (!res->flags) {
- printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
b->name);
return 1;
}
rc = pcibios_unmap_io_space(b);
if (rc) {
printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (release_resource(res)) {
printk(KERN_ERR "%s: failed to release IO on bus %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
res = b->resource[i];
if (!res->flags && i == 0) {
printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
- __FUNCTION__, b->name);
+ __func__, b->name);
return 1;
}
if (res->flags && release_resource(res)) {
printk(KERN_ERR
"%s: failed to release IO %d on bus %s\n",
- __FUNCTION__, i, b->name);
+ __func__, i, b->name);
return 1;
}
}
#include <linux/serial_8250.h>
#include <linux/debugfs.h>
#include <linux/percpu.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/xmon.h>
#include <asm/cputhreads.h>
unsigned short min;
if (cpu_id == NR_CPUS) {
+ struct device_node *root;
+ const char *model = NULL;
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
unsigned long bogosum = 0;
int i;
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
if (ppc_md.name)
seq_printf(m, "platform\t: %s\n", ppc_md.name);
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ if (model)
+ seq_printf(m, "model\t\t: %s\n", model);
+ of_node_put(root);
+
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
}
__setup("l2cr=", ppc_setup_l2cr);
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+ if (cpu_has_feature(CPU_FTR_L3CR)) {
+ unsigned long val = simple_strtoul(str, NULL, 0);
+ printk(KERN_INFO "l3cr set to %lx\n", val);
+ _set_L3CR(val); /* and enable it */
+ }
+ return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
if (ppc_md.panic)
setup_panic();
- init_mm.start_code = PAGE_OFFSET;
+ init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
if (ppc_md.panic)
setup_panic();
- init_mm.start_code = PAGE_OFFSET;
+ init_mm.start_code = (unsigned long)_stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
- if (error == 0) {
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
- }
putname(filename);
out:
#include <linux/elf.h>
#include <linux/security.h>
#include <linux/bootmem.h>
+#include <linux/lmb.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/cputable.h>
#include <asm/sections.h>
*/
int vio_register_driver(struct vio_driver *viodrv)
{
- printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
+ printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
viodrv->driver.name);
/* fill in 'struct driver' fields */
/* we need the 'device_type' property, in order to match with drivers */
if (of_node->type == NULL) {
printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
unit_address = of_get_property(of_node, "reg", NULL);
if (unit_address == NULL) {
printk(KERN_WARNING "%s: node %s missing 'reg'\n",
- __FUNCTION__,
+ __func__,
of_node->name ? of_node->name : "<unknown>");
return NULL;
}
/* register with generic device framework */
if (device_register(&viodev->dev)) {
printk(KERN_ERR "%s: failed to register device %s\n",
- __FUNCTION__, viodev->dev.bus_id);
+ __func__, viodev->dev.bus_id);
/* XXX free TCE table */
kfree(viodev);
return NULL;
err = device_register(&vio_bus_device.dev);
if (err) {
printk(KERN_WARNING "%s: device_register returned %i\n",
- __FUNCTION__, err);
+ __func__, err);
return err;
}
#ifdef CONFIG_PPC64
-#include <asm/page.h>
#define PROVIDE32(x) PROVIDE(__unused__##x)
#else
-#define PAGE_SIZE 4096
-#define KERNELBASE CONFIG_KERNEL_START
#define PROVIDE32(x) PROVIDE(x)
#endif
+#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
*/
/* Text and gots */
- .text : {
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
*(.text.head)
_text = .;
RODATA
/* Exception & bug tables */
- __ex_table : {
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
. = ALIGN(PAGE_SIZE);
__init_begin = .;
- .init.text : {
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
INIT_TEXT
_einittext = .;
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
- .exit.text : {
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
- .init.data : {
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
__vtop_table_begin = .;
*(.vtop_fixup);
}
. = ALIGN(16);
- .init.setup : {
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
__setup_start = .;
*(.init.setup)
__setup_end = .;
}
- .initcall.init : {
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
__initcall_start = .;
INITCALLS
__initcall_end = .;
}
- .con_initcall.init : {
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
__con_initcall_start = .;
*(.con_initcall.init)
__con_initcall_end = .;
SECURITY_INIT
. = ALIGN(8);
- __ftr_fixup : {
+ __ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
__start___ftr_fixup = .;
*(__ftr_fixup)
__stop___ftr_fixup = .;
}
#ifdef CONFIG_PPC64
. = ALIGN(8);
- __fw_ftr_fixup : {
+ __fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
__start___fw_ftr_fixup = .;
*(__fw_ftr_fixup)
__stop___fw_ftr_fixup = .;
#endif
#ifdef CONFIG_BLK_DEV_INITRD
. = ALIGN(PAGE_SIZE);
- .init.ramfs : {
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
#endif
. = ALIGN(PAGE_SIZE);
- .data.percpu : {
+ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
__per_cpu_start = .;
*(.data.percpu)
*(.data.percpu.shared_aligned)
}
. = ALIGN(8);
- .machine.desc : {
+ .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
__machine_desc_start = . ;
*(.machine.desc)
__machine_desc_end = . ;
_sdata = .;
#ifdef CONFIG_PPC32
- .data :
- {
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.sdata)
*(.got.plt) *(.got)
}
#else
- .data : {
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
DATA_DATA
*(.data.rel*)
*(.toc1)
*(.branch_lt)
}
- .opd : {
+ .opd : AT(ADDR(.opd) - LOAD_OFFSET) {
*(.opd)
}
- .got : {
+ .got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
*(.got)
*(.toc)
#else
. = ALIGN(16384);
#endif
- .data.init_task : {
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
*(.data.init_task)
}
. = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
*(.data.page_aligned)
}
- .data.cacheline_aligned : {
+ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
. = ALIGN(L1_CACHE_BYTES);
- .data.read_mostly : {
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly)
}
. = ALIGN(PAGE_SIZE);
- __data_nosave : {
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
__nosave_begin = .;
*(.data.nosave)
. = ALIGN(PAGE_SIZE);
* And finally the bss
*/
- .bss : {
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.sbss) *(.scommon)
*(.dynbss)
beq 1b
blr
+_GLOBAL(strncmp)
+ PPC_LCMPI r5,0
+ beqlr
+ mtctr r5
+ addi r5,r3,-1
+ addi r4,r4,-1
+1: lbzu r3,1(r5)
+ cmpwi 1,r3,0
+ lbzu r0,1(r4)
+ subf. r3,r0,r3
+ beqlr 1
+ bdnzt eq,1b
+ blr
+
_GLOBAL(strlen)
addi r4,r3,-1
1: lbzu r0,1(r4)
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
long cmp;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+ printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
frD[1] = r;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
__FPU_FPSCR = fpscr;
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
ret |= EFLAG_VXZDZ;
#ifdef DEBUG
- printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
ret |= EFLAG_VXIDI;
#ifdef DEBUG
- printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+ printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
frD[1] = frB[1];
#ifdef DEBUG
- printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p: ", __func__, frD, frB);
dump_double(frD);
printk("\n");
#endif
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
fres(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return -ENOSYS;
}
FP_DECL_D(B);
#ifdef DEBUG
- printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
+ printk("%s: D %p, B %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
frsqrte(void *frD, void *frB)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p\n", __func__, frD, frB);
#endif
return 0;
}
FP_DECL_D(A);
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+ printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+ printk("%s: %p %p %p %p\n", __func__, frD, frB);
#endif
__FP_UNPACK_D(B, frB);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
int ret = 0;
#ifdef DEBUG
- printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+ printk("%s: %p %p %p\n", __func__, frD, frA, frB);
#endif
__FP_UNPACK_D(A, frA);
if (copy_from_user(frD, ea, sizeof(double)))
return -EFAULT;
#ifdef DEBUG
- printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p: ", __func__, frD, ea);
dump_double(frD);
printk("\n");
#endif
float f;
#ifdef DEBUG
- printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
+ printk("%s: D %p, ea %p\n", __func__, frD, ea);
#endif
if (copy_from_user(&f, ea, sizeof(float)))
u32 value, clear;
#ifdef DEBUG
- printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
+ printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
#endif
clear = 15 << ((7 - crfS) << 2);
*ccr |= (value << ((7 - crfD) << 2));
#ifdef DEBUG
- printk("CR: %08x\n", __FUNCTION__, *ccr);
+ printk("CR: %08x\n", __func__, *ccr);
#endif
return 0;
frD[1] = __FPU_FPSCR;
#ifdef DEBUG
- printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
+ printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
#endif
return 0;
__FPU_FPSCR &= ~(1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
__FPU_FPSCR |= (1 << (31 - crbD));
#ifdef DEBUG
- printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+ printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
#endif
return 0;
__FPU_FPSCR |= (frB[1] & mask);
#ifdef DEBUG
- printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
+ printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
#endif
return 0;
__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
#ifdef DEBUG
- printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
+ printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
#endif
return 0;
{
#if 0
#ifdef DEBUG
- printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p: ", __func__, frS, ea);
dump_double(frS);
printk("\n");
#endif
stfiwx(u32 *frS, void *ea)
{
#ifdef DEBUG
- printk("%s: %p %p\n", __FUNCTION__, frS, ea);
+ printk("%s: %p %p\n", __func__, frS, ea);
#endif
if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
int err;
#ifdef DEBUG
- printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
+ printk("%s: S %p, ea %p\n", __func__, frS, ea);
#endif
__FP_UNPACK_D(A, frS);
phys_addr_t p;
v = KERNELBASE;
- p = PPC_MEMSTART;
+ p = 0;
s = total_lowmem;
if (__map_without_ltlbs)
/* Pin in enough TLBs to cover any lowmem not covered by the
* initial 256M mapping established in head_44x.S */
- for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+ for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
addr += PPC_PIN_SIZE)
ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o lmb.o \
+obj-y := fault.o mem.o \
init_$(CONFIG_WORD_SIZE).o \
pgtable_$(CONFIG_WORD_SIZE).o \
mmu_context_$(CONFIG_WORD_SIZE).o
#include <asm/mmu.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
-#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
+#include "mmu_decl.h"
+
extern void loadcam_entry(unsigned int index);
unsigned int tlbcam_index;
unsigned int num_tlbcam_entries;
static unsigned long __cam0, __cam1, __cam2;
-extern unsigned long total_lowmem;
-extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
-#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE
#define NUM_TLBCAMS (16)
void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
unsigned long cam2)
{
- settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+ settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
tlbcam_index++;
if (cam1) {
tlbcam_index++;
- settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+ settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
}
if (cam2) {
tlbcam_index++;
- settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+ settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
}
}
void __init
adjust_total_lowmem(void)
{
- unsigned long max_low_mem = MAX_LOW_MEM;
- unsigned long cam_max = 0x10000000;
- unsigned long ram;
+ phys_addr_t max_lowmem_size = __max_low_memory;
+ phys_addr_t cam_max_size = 0x10000000;
+ phys_addr_t ram;
- /* adjust CAM size to max_low_mem */
- if (max_low_mem < cam_max)
- cam_max = max_low_mem;
+ /* adjust CAM size to max_lowmem_size */
+ if (max_lowmem_size < cam_max_size)
+ cam_max_size = max_lowmem_size;
- /* adjust lowmem size to max_low_mem */
- if (max_low_mem < total_lowmem)
- ram = max_low_mem;
- else
- ram = total_lowmem;
+ /* adjust lowmem size to max_lowmem_size */
+ ram = min(max_lowmem_size, total_lowmem);
/* Calculate CAM values */
__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam0 > cam_max)
- __cam0 = cam_max;
+ if (__cam0 > cam_max_size)
+ __cam0 = cam_max_size;
ram -= __cam0;
if (ram) {
__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam1 > cam_max)
- __cam1 = cam_max;
+ if (__cam1 > cam_max_size)
+ __cam1 = cam_max_size;
ram -= __cam1;
}
if (ram) {
__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
- if (__cam2 > cam_max)
- __cam2 = cam_max;
+ if (__cam2 > cam_max_size)
+ __cam2 = cam_max_size;
ram -= __cam2;
}
" CAM2=%ldMb residual: %ldMb\n",
__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
- __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
- __initial_memory_limit = __max_low_memory;
+ __max_low_memory = __cam0 + __cam1 + __cam2;
+ __initial_memory_limit_addr = memstart_addr + __max_low_memory;
}
#ifdef CONFIG_SMP
.text
_GLOBAL(hash_page_sync)
+ mfmsr r10
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ mtmsr r0
lis r8,mmu_hash_lock@h
ori r8,r8,mmu_hash_lock@l
lis r0,0x0fff
eieio
li r0,0
stw r0,0(r8)
- blr
-#endif
+ mtmsr r10
+ blr
+#endif /* CONFIG_SMP */
/*
* Load a PTE into the hash table, if possible.
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/signal.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
return ret < 0 ? ret : 0;
}
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
+ int psize, int ssize)
+{
+ unsigned long vaddr;
+ unsigned int step, shift;
+
+ shift = mmu_psize_defs[psize].shift;
+ step = 1 << shift;
+
+ if (!ppc_md.hpte_removebolted) {
+ printk(KERN_WARNING "Platform doesn't implement "
+ "hpte_removebolted\n");
+ return -EINVAL;
+ }
+
+ for (vaddr = vstart; vaddr < vend; vaddr += step)
+ ppc_md.hpte_removebolted(vaddr, psize, ssize);
+
+ return 0;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
static int __init htab_dt_scan_seg_sizes(unsigned long node,
const char *uname, int depth,
void *data)
_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
mmu_linear_psize, mmu_kernel_ssize));
}
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+ return htab_remove_mapping(start, end, mmu_linear_psize,
+ mmu_kernel_ssize);
+}
#endif /* CONFIG_MEMORY_HOTPLUG */
static inline void make_bl(unsigned int *insn_addr, void *func)
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/pagemap.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include "mmu_decl.h"
unsigned long total_memory;
unsigned long total_lowmem;
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
+phys_addr_t memstart_addr;
+phys_addr_t lowmem_end_addr;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
- * limit of what is accessible with initial MMU setup -
+ * address of the limit of what is accessible with initial MMU setup -
* 256MB usually, but only 16MB on 601.
*/
-unsigned long __initial_memory_limit = 0x10000000;
+phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
/*
* Check for command-line options that affect what MMU_init will do.
/* 601 can only access 16MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
- __initial_memory_limit = 0x01000000;
+ __initial_memory_limit_addr = 0x01000000;
/* 8xx can only access 8MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
- __initial_memory_limit = 0x00800000;
+ __initial_memory_limit_addr = 0x00800000;
/* parse args from command line */
MMU_setup();
printk(KERN_WARNING "Only using first contiguous memory region");
}
- total_memory = lmb_end_of_DRAM();
- total_lowmem = total_memory;
+ total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+ lowmem_end_addr = memstart_addr + total_lowmem;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
if (total_lowmem > __max_low_memory) {
total_lowmem = __max_low_memory;
+ lowmem_end_addr = memstart_addr + total_lowmem;
#ifndef CONFIG_HIGHMEM
total_memory = total_lowmem;
- lmb_enforce_memory_limit(total_lowmem);
+ lmb_enforce_memory_limit(lowmem_end_addr);
lmb_analyze();
#endif /* CONFIG_HIGHMEM */
}
/* Map in I/O resources */
if (ppc_md.progress)
ppc_md.progress("MMU:setio", 0x302);
- if (ppc_md.setup_io_mappings)
- ppc_md.setup_io_mappings();
/* Initialize the context management stuff */
mmu_context_init();
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
- __initial_memory_limit));
+ __initial_memory_limit_addr));
}
return p;
}
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
/* must stay under 32 bits */
if ( 0xfffffffful - (unsigned long)__va(base) < size) {
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/poison.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/rtas.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
/* max amount of RAM to use */
unsigned long __max_memory;
+phys_addr_t memstart_addr;
+
void free_initmem(void)
{
unsigned long addr;
/* GFP_ATOMIC to avoid might_sleep warnings during boot */
kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
if (!kcore_mem)
- panic("%s: kmalloc failed\n", __FUNCTION__);
+ panic("%s: kmalloc failed\n", __func__);
kclist_add(kcore_mem, __va(base), size);
}
+++ /dev/null
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp. June 2001.
- * Copyright (C) 2001 Peter Bergner.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#ifdef CONFIG_PPC32
-#include "mmu_decl.h" /* for __max_low_memory */
-#endif
-
-#undef DEBUG
-
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-#define LMB_ALLOC_ANYWHERE 0
-
-struct lmb lmb;
-
-void lmb_dump_all(void)
-{
-#ifdef DEBUG
- unsigned long i;
-
- DBG("lmb_dump_all:\n");
- DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
- DBG(" memory.size = 0x%lx\n", lmb.memory.size);
- for (i=0; i < lmb.memory.cnt ;i++) {
- DBG(" memory.region[0x%x].base = 0x%lx\n",
- i, lmb.memory.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.memory.region[i].size);
- }
-
- DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- DBG(" reserved.size = 0x%lx\n", lmb.reserved.size);
- for (i=0; i < lmb.reserved.cnt ;i++) {
- DBG(" reserved.region[0x%x].base = 0x%lx\n",
- i, lmb.reserved.region[i].base);
- DBG(" .size = 0x%lx\n",
- lmb.reserved.region[i].size);
- }
-#endif /* DEBUG */
-}
-
-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
- unsigned long size1, unsigned long base2, unsigned long size2)
-{
- return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
-}
-
-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
- unsigned long base2, unsigned long size2)
-{
- if (base2 == base1 + size1)
- return 1;
- else if (base1 == base2 + size2)
- return -1;
-
- return 0;
-}
-
-static long __init lmb_regions_adjacent(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- unsigned long base1 = rgn->region[r1].base;
- unsigned long size1 = rgn->region[r1].size;
- unsigned long base2 = rgn->region[r2].base;
- unsigned long size2 = rgn->region[r2].size;
-
- return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
- unsigned long i;
-
- for (i = r; i < rgn->cnt - 1; i++) {
- rgn->region[i].base = rgn->region[i + 1].base;
- rgn->region[i].size = rgn->region[i + 1].size;
- }
- rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
- unsigned long r1, unsigned long r2)
-{
- rgn->region[r1].size += rgn->region[r2].size;
- lmb_remove_region(rgn, r2);
-}
-
-/* This routine called with relocation disabled. */
-void __init lmb_init(void)
-{
- /* Create a dummy zero size LMB which will get coalesced away later.
- * This simplifies the lmb_add() code below...
- */
- lmb.memory.region[0].base = 0;
- lmb.memory.region[0].size = 0;
- lmb.memory.cnt = 1;
-
- /* Ditto. */
- lmb.reserved.region[0].base = 0;
- lmb.reserved.region[0].size = 0;
- lmb.reserved.cnt = 1;
-}
-
-/* This routine may be called with relocation disabled. */
-void __init lmb_analyze(void)
-{
- int i;
-
- lmb.memory.size = 0;
-
- for (i = 0; i < lmb.memory.cnt; i++)
- lmb.memory.size += lmb.memory.region[i].size;
-}
-
-/* This routine called with relocation disabled. */
-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
-{
- unsigned long coalesced = 0;
- long adjacent, i;
-
- /* First try and coalesce this LMB with another. */
- for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
-
- if ((rgnbase == base) && (rgnsize == size))
- /* Already have this region, so we're done */
- return 0;
-
- adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
- if ( adjacent > 0 ) {
- rgn->region[i].base -= size;
- rgn->region[i].size += size;
- coalesced++;
- break;
- }
- else if ( adjacent < 0 ) {
- rgn->region[i].size += size;
- coalesced++;
- break;
- }
- }
-
- if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
- lmb_coalesce_regions(rgn, i, i+1);
- coalesced++;
- }
-
- if (coalesced)
- return coalesced;
- if (rgn->cnt >= MAX_LMB_REGIONS)
- return -1;
-
- /* Couldn't coalesce the LMB, so add it to the sorted table. */
- for (i = rgn->cnt-1; i >= 0; i--) {
- if (base < rgn->region[i].base) {
- rgn->region[i+1].base = rgn->region[i].base;
- rgn->region[i+1].size = rgn->region[i].size;
- } else {
- rgn->region[i+1].base = base;
- rgn->region[i+1].size = size;
- break;
- }
- }
- rgn->cnt++;
-
- return 0;
-}
-
-/* This routine may be called with relocation disabled. */
-long __init lmb_add(unsigned long base, unsigned long size)
-{
- struct lmb_region *_rgn = &(lmb.memory);
-
- /* On pSeries LPAR systems, the first LMB is our RMO region. */
- if (base == 0)
- lmb.rmo_size = size;
-
- return lmb_add_region(_rgn, base, size);
-
-}
-
-long __init lmb_reserve(unsigned long base, unsigned long size)
-{
- struct lmb_region *_rgn = &(lmb.reserved);
-
- BUG_ON(0 == size);
-
- return lmb_add_region(_rgn, base, size);
-}
-
-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
- unsigned long size)
-{
- unsigned long i;
-
- for (i=0; i < rgn->cnt; i++) {
- unsigned long rgnbase = rgn->region[i].base;
- unsigned long rgnsize = rgn->region[i].size;
- if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
- break;
- }
- }
-
- return (i < rgn->cnt) ? i : -1;
-}
-
-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
-{
- return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
-{
- unsigned long alloc;
-
- alloc = __lmb_alloc_base(size, align, max_addr);
-
- if (alloc == 0)
- panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
- size, max_addr);
-
- return alloc;
-}
-
-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
- unsigned long max_addr)
-{
- long i, j;
- unsigned long base = 0;
-
- BUG_ON(0 == size);
-
-#ifdef CONFIG_PPC32
- /* On 32-bit, make sure we allocate lowmem */
- if (max_addr == LMB_ALLOC_ANYWHERE)
- max_addr = __max_low_memory;
-#endif
- for (i = lmb.memory.cnt-1; i >= 0; i--) {
- unsigned long lmbbase = lmb.memory.region[i].base;
- unsigned long lmbsize = lmb.memory.region[i].size;
-
- if (max_addr == LMB_ALLOC_ANYWHERE)
- base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
- else if (lmbbase < max_addr) {
- base = min(lmbbase + lmbsize, max_addr);
- base = _ALIGN_DOWN(base - size, align);
- } else
- continue;
-
- while ((lmbbase <= base) &&
- ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
- base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
- align);
-
- if ((base != 0) && (lmbbase <= base))
- break;
- }
-
- if (i < 0)
- return 0;
-
- lmb_add_region(&lmb.reserved, base, size);
-
- return base;
-}
-
-/* You must call lmb_analyze() before this. */
-unsigned long __init lmb_phys_mem_size(void)
-{
- return lmb.memory.size;
-}
-
-unsigned long __init lmb_end_of_DRAM(void)
-{
- int idx = lmb.memory.cnt - 1;
-
- return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
-{
- unsigned long i, limit;
- struct lmb_property *p;
-
- if (! memory_limit)
- return;
-
- /* Truncate the lmb regions to satisfy the memory limit. */
- limit = memory_limit;
- for (i = 0; i < lmb.memory.cnt; i++) {
- if (limit > lmb.memory.region[i].size) {
- limit -= lmb.memory.region[i].size;
- continue;
- }
-
- lmb.memory.region[i].size = limit;
- lmb.memory.cnt = i + 1;
- break;
- }
-
- if (lmb.memory.region[0].size < lmb.rmo_size)
- lmb.rmo_size = lmb.memory.region[0].size;
-
- /* And truncate any reserves above the limit also. */
- for (i = 0; i < lmb.reserved.cnt; i++) {
- p = &lmb.reserved.region[i];
-
- if (p->base > memory_limit)
- p->size = 0;
- else if ((p->base + p->size) > memory_limit)
- p->size = memory_limit - p->base;
-
- if (p->size == 0) {
- lmb_remove_region(&lmb.reserved, i);
- i--;
- }
- }
-}
-
-int __init lmb_is_reserved(unsigned long addr)
-{
- int i;
-
- for (i = 0; i < lmb.reserved.cnt; i++) {
- unsigned long upper = lmb.reserved.region[i].base +
- lmb.reserved.region[i].size - 1;
- if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
- return 1;
- }
- return 0;
-}
#include <linux/initrd.h>
#include <linux/pagemap.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/btext.h>
#include <asm/tlb.h>
-#include <asm/lmb.h>
#include <asm/sections.h>
#include <asm/vdso.h>
}
#endif
-int __devinit arch_add_memory(int nid, u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
{
struct pglist_data *pgdata;
struct zone *zone;
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
for_each_online_pgdat(pgdat) {
unsigned long flags;
pgdat_resize_lock(pgdat, &flags);
unsigned long total_pages;
int boot_mapsize;
- max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+ total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
+ max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
#endif
/*
* present.
*/
#ifdef CONFIG_HIGHMEM
- free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+ free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++) {
unsigned long addr = lmb.reserved.region[i].base +
lmb_size_bytes(&lmb.reserved, i) - 1;
- if (addr < total_lowmem)
+ if (addr < lowmem_end_addr)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i),
BOOTMEM_DEFAULT);
- else if (lmb.reserved.region[i].base < total_lowmem) {
- unsigned long adjusted_size = total_lowmem -
+ else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+ unsigned long adjusted_size = lowmem_end_addr -
lmb.reserved.region[i].base;
reserve_bootmem(lmb.reserved.region[i].base,
adjusted_size, BOOTMEM_DEFAULT);
(top_of_ram - total_ram) >> 20);
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
#ifdef CONFIG_HIGHMEM
- max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+ max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
#else
max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
{
unsigned long pfn, highmem_mapnr;
- highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+ highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = pfn_to_page(pfn);
if (lmb_is_reserved(pfn << PAGE_SHIFT))
extern unsigned long ioremap_bot;
extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
+extern phys_addr_t __initial_memory_limit_addr;
extern unsigned long total_memory;
extern unsigned long total_lowmem;
+extern phys_addr_t memstart_addr;
+extern phys_addr_t lowmem_end_addr;
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
+#include <linux/lmb.h>
#include <asm/sparsemem.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/system.h>
#include <asm/smp.h>
*/
void __init mapin_ram(void)
{
- unsigned long v, p, s, f;
+ unsigned long v, s, f;
+ phys_addr_t p;
int ktext;
s = mmu_mapin_ram();
v = KERNELBASE + s;
- p = PPC_MEMSTART + s;
+ p = memstart_addr + s;
for (; s < total_lowmem; s += PAGE_SIZE) {
ktext = ((char *) v >= _stext && (char *) v < etext);
f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/highmem.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
#include "mmu_decl.h"
#else
unsigned long tot, bl, done;
unsigned long max_size = (256<<20);
- unsigned long align;
if (__map_without_bats) {
printk(KERN_DEBUG "RAM mapped without BATs\n");
/* Make sure we don't map a block larger than the
smallest alignment of the physical address. */
- /* alignment of PPC_MEMSTART */
- align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
- /* set BAT block size to MIN(max_size, align) */
- if (align && align < max_size)
- max_size = align;
-
tot = total_lowmem;
for (bl = 128<<10; bl < max_size; bl <<= 1) {
if (bl * 2 > tot)
break;
}
- setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
+ setbat(2, KERNELBASE, 0, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
if ((done < tot) && !bat_addrs[3].limit) {
/* use BAT3 to cover a bit more */
for (bl = 128<<10; bl < max_size; bl <<= 1)
if (bl * 2 > tot)
break;
- setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
+ setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM);
done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
}
*/
if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
- __initial_memory_limit));
+ __initial_memory_limit_addr));
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/paca.h>
#include <asm/cputable.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/abs_addr.h>
#include <asm/firmware.h>
#include <asm/iseries/hv_call.h>
if (spu_num >= num_spu_nodes) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_num);
+ __func__, __LINE__, spu_num);
ret_info = NULL;
goto out;
}
if (!info) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
if (!new_map) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: create vma_map failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
retval = -ENOMEM;
goto err_alloc;
}
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: "
"Invalid index %d into spu info cache\n",
- __FUNCTION__, __LINE__, spu_index);
+ __func__, __LINE__, spu_index);
goto out;
}
end = spu_index + 1;
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Cannot find dcookie for SPU binary\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto out;
}
if (ret) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: spu_switch_event_unregister returned %d\n",
- __FUNCTION__, __LINE__, ret);
+ __func__, __LINE__, ret);
goto out;
}
kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
if (!new) {
printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
vma_map_free(map);
return NULL;
}
* A pointer to the first vma_map in the generated list
* of vma_maps is returned. */
struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
- unsigned long spu_elf_start)
+ unsigned long __spu_elf_start)
{
static const unsigned char expected[EI_PAD] = {
[EI_MAG0] = ELFMAG0,
int grd_val;
struct vma_to_fileoffset_map *map = NULL;
+ void __user *spu_elf_start = (void __user *)__spu_elf_start;
struct spu_overlay_info ovly;
unsigned int overlay_tbl_offset = -1;
- unsigned long phdr_start, shdr_start;
+ Elf32_Phdr __user *phdr_start;
+ Elf32_Shdr __user *shdr_start;
Elf32_Ehdr ehdr;
Elf32_Phdr phdr;
Elf32_Shdr shdr, shdr_str;
unsigned int ovly_buf_table_sym = 0;
unsigned int ovly_table_end_sym = 0;
unsigned int ovly_buf_table_end_sym = 0;
- unsigned long ovly_table;
+ struct spu_overlay_info __user *ovly_table;
unsigned int n_ovlys;
/* Get and validate ELF header. */
- if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr)))
+ if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
goto fail;
if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_ident parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_machine != EM_SPU) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_machine parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
if (ehdr.e_type != ET_EXEC) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Unexpected e_type parsing SPU ELF\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
phdr_start = spu_elf_start + ehdr.e_phoff;
/* Traverse program headers. */
for (i = 0; i < ehdr.e_phnum; i++) {
- if (copy_from_user(&phdr,
- (void *) (phdr_start + i * sizeof(phdr)),
- sizeof(phdr)))
+ if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
goto fail;
if (phdr.p_type != PT_LOAD)
pr_debug("SPU_PROF: Created non-overlay maps\n");
/* Traverse section table and search for overlay-related symbols. */
for (i = 0; i < ehdr.e_shnum; i++) {
- if (copy_from_user(&shdr,
- (void *) (shdr_start + i * sizeof(shdr)),
- sizeof(shdr)))
+ if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
goto fail;
if (shdr.sh_type != SHT_SYMTAB)
continue;
if (copy_from_user(&shdr_str,
- (void *) (shdr_start + shdr.sh_link *
- sizeof(shdr)),
+ shdr_start + shdr.sh_link,
sizeof(shdr)))
goto fail;
goto fail;;
for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
- if (copy_from_user(&sym, (void *) (spu_elf_start +
- shdr.sh_offset + j *
- sizeof (sym)),
+ if (copy_from_user(&sym, spu_elf_start +
+ shdr.sh_offset +
+ j * sizeof (sym),
sizeof (sym)))
goto fail;
- if (copy_from_user(name, (void *)
- (spu_elf_start + shdr_str.sh_offset +
- sym.st_name),
+ if (copy_from_user(name,
+ spu_elf_start + shdr_str.sh_offset +
+ sym.st_name,
20))
goto fail;
if (overlay_tbl_offset < 0) {
printk(KERN_ERR "SPU_PROF: "
"%s, line %d: Error finding SPU overlay table\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
goto fail;
}
ovly_table = spu_elf_start + overlay_tbl_offset;
/* Traverse overlay table. */
for (i = 0; i < n_ovlys; i++) {
- if (copy_from_user(&ovly, (void *)
- (ovly_table + i * sizeof (ovly)),
- sizeof (ovly)))
+ if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
goto fail;
/* The ovly.vma/size/offset arguments are analogous to the same
* failure to stop OProfile.
*/
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
}
static int pm_rtas_activate_signals(u32 node, u32 count)
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
}
if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-spu-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
}
if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
"%s: rtas token ibm,cbe-perftools unknown\n",
- __FUNCTION__);
+ __func__);
return -EIO;
}
if (unlikely(ret)) {
printk(KERN_WARNING "%s: rtas returned: %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
return -EIO;
}
if (unlikely(ret != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, ret);
+ __func__, ret);
rtas_error = -EIO;
goto out;
}
if (unlikely(rtn_value != 0)) {
printk(KERN_ERR
"%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __FUNCTION__, rtn_value);
+ __func__, rtn_value);
}
/* Deactivate the signals */
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static struct device_node *bcsr_node;
static void __iomem *bcsr_regs;
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
/*
* Kilauea board specific routines
*
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* Based on the Walnut code by
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id makalu_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include <asm/ppc4xx.h>
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
{ .compatible = "xlnx,plb-v46-1.00.a", },
.probe = virtex_probe,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
extern u8 as1_readb(volatile u8 __iomem *addr);
extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
-extern void ppc44x_reset_system(char *cmd);
#endif /* __POWERPC_PLATFORMS_44X_44X_H */
See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
Telephony Developers" link for more information.
+config CANYONLANDS
+ bool "Canyonlands"
+ depends on 44x
+ default n
+ select 460EX
+ select PCI
+ select PPC4xx_PCI_EXPRESS
+ help
+ This option enables support for the AMCC PPC460EX evaluation board.
+
+config YOSEMITE
+ bool "Yosemite"
+ depends on 44x
+ default n
+ select 440EP
+ select PCI
+ help
+ This option enables support for the AMCC PPC440EP evaluation board.
+
#config LUAN
# bool "Luan"
# depends on 44x
bool
select IBM_NEW_EMAC_EMAC4
+config 460EX
+ bool
+ select PPC_FPU
+ select IBM_NEW_EMAC_EMAC4
+ select IBM_NEW_EMAC_RGMII
+ select IBM_NEW_EMAC_ZMII
+ select IBM_NEW_EMAC_TAH
+
# 44x errata/workaround config symbols, selected by the CPU models above
config IBM440EP_ERR42
bool
-obj-$(CONFIG_44x) := misc_44x.o
+obj-$(CONFIG_44x) := misc_44x.o idle.o
obj-$(CONFIG_EBONY) += ebony.o
obj-$(CONFIG_TAISHAN) += taishan.o
obj-$(CONFIG_BAMBOO) += bamboo.o
+obj-$(CONFIG_YOSEMITE) += bamboo.o
obj-$(CONFIG_SEQUOIA) += sequoia.o
obj-$(CONFIG_KATMAI) += katmai.o
obj-$(CONFIG_RAINIER) += rainier.o
obj-$(CONFIG_WARP) += warp.o
obj-$(CONFIG_WARP) += warp-nand.o
+obj-$(CONFIG_CANYONLANDS) += canyonlands.o
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id bamboo_of_bus[] = {
{ .compatible = "ibm,plb4", },
}
define_machine(bamboo) {
- .name = "Bamboo",
- .probe = bamboo_probe,
- .progress = udbg_progress,
- .init_IRQ = uic_init_tree,
- .get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .name = "Bamboo",
+ .probe = bamboo_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
--- /dev/null
+/*
+ * Canyonlands board specific routines
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Katmai code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id canyonlands_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init canyonlands_device_probe(void)
+{
+ of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
+
+ return 0;
+}
+machine_device_initcall(canyonlands, canyonlands_device_probe);
+
+static int __init canyonlands_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
+ return 0;
+
+ ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+ return 1;
+}
+
+define_machine(canyonlands) {
+ .name = "Canyonlands",
+ .probe = canyonlands_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc4xx_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id ebony_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
--- /dev/null
+/*
+ * Copyright 2008 IBM Corp.
+ *
+ * Based on arch/powerpc/platforms/pasemi/idle.c:
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Added by: Jerone Young <jyoung5@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <asm/machdep.h>
+
+static int mode_spin;
+
+static void ppc44x_idle(void)
+{
+ unsigned long msr_save;
+
+ msr_save = mfmsr();
+ /* set wait state MSR */
+ mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
+ isync();
+ /* return to initial state */
+ mtmsr(msr_save);
+ isync();
+}
+
+int __init ppc44x_idle_init(void)
+{
+ if (!mode_spin) {
+ /* If we are not setting spin mode
+ then we set to wait mode */
+ ppc_md.power_save = &ppc44x_idle;
+ }
+
+ return 0;
+}
+
+arch_initcall(ppc44x_idle_init);
+
+static int __init idle_param(char *p)
+{
+
+ if (!strcmp("spin", p)) {
+ mode_spin = 1;
+ ppc_md.power_save = NULL;
+ }
+
+ return 0;
+}
+
+early_param("idle", idle_param);
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id katmai_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
sync
isync
blr
-
-/*
- * void ppc44x_reset_system(char *cmd)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(ppc44x_reset_system)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM@h
- mtspr SPRN_DBCR0,r13
- b . /* Just in case the reset doesn't work */
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id rainier_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id sequoia_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <asm/time.h>
#include <asm/uic.h>
#include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id taishan_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/ndfc.h>
+#include <asm/machdep.h>
#ifdef CONFIG_MTD_NAND_NDFC
return 0;
}
-device_initcall(warp_setup_nand_flash);
+machine_device_initcall(warp, warp_setup_nand_flash);
#endif
#include <asm/udbg.h>
#include <asm/time.h>
#include <asm/uic.h>
-
-#include "44x.h"
-
+#include <asm/ppc4xx.h>
static __initdata struct of_device_id warp_of_bus[] = {
{ .compatible = "ibm,plb4", },
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .restart = ppc44x_reset_system,
+ .restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
of_node_put(np);
if (!cdm) {
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
- __FUNCTION__);
+ __func__);
return;
}
of_node_put(np);
if (!gpio) {
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
- __FUNCTION__);
+ __func__);
return;
}
help
This option enables support for the MPC85xx DS (MPC8544 DS) board
+config KSI8560
+ bool "Emerson KSI8560"
+ select PPC_CPM_NEW_BINDING
+ select DEFAULT_UIMAGE
+ help
+ This option enables support for the Emerson KSI8560 board
+
config STX_GP3
bool "Silicon Turnkey Express GP3"
help
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
+obj-$(CONFIG_KSI8560) += ksi8560.o
--- /dev/null
+/*
+ * Board setup routines for the Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc85xx_ads.c maintained by Kumar Gala
+ *
+ * 2008 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+
+
+#define KSI8560_CPLD_HVR 0x04 /* Hardware Version Register */
+#define KSI8560_CPLD_PVR 0x08 /* PLD Version Register */
+#define KSI8560_CPLD_RCR1 0x30 /* Reset Command Register 1 */
+
+#define KSI8560_CPLD_RCR1_CPUHR 0x80 /* CPU Hard Reset */
+
+static void __iomem *cpld_base = NULL;
+
+static void machine_restart(char *cmd)
+{
+ if (cpld_base)
+ out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
+ else
+ printk(KERN_ERR "Can't find CPLD base, hang forever\n");
+
+ for (;;);
+}
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ int cascade_irq;
+
+ while ((cascade_irq = cpm2_get_irq()) >= 0)
+ generic_handle_irq(cascade_irq);
+
+ desc->chip->eoi(irq);
+}
+
+static void __init ksi8560_pic_init(void)
+{
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np;
+#ifdef CONFIG_CPM2
+ int irq;
+#endif
+
+ np = of_find_node_by_type(NULL, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if (of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+ /* Setup CPM2 PIC */
+ np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+ if (np == NULL) {
+ printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+ return;
+ }
+ irq = irq_of_parse_and_map(np, 0);
+
+ cpm2_pic_init(np);
+ of_node_put(np);
+ set_irq_chained_handler(irq, cpm2_cascade);
+
+ setup_irq(0, NULL);
+#endif
+}
+
+#ifdef CONFIG_CPM2
+/*
+ * Setup I/O ports
+ */
+struct cpm_pin {
+ int port, pin, flags;
+};
+
+static struct cpm_pin __initdata ksi8560_pins[] = {
+ /* SCC1 */
+ {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* SCC2 */
+ {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* FCC1 */
+ {0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+ {0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+ {0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+ {0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+ {2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
+ {2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
+
+};
+
+static void __init init_ioports(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
+ struct cpm_pin *pin = &ksi8560_pins[i];
+ cpm2_set_pin(pin->port, pin->pin, pin->flags);
+ }
+
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
+ cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init ksi8560_setup_arch(void)
+{
+ struct device_node *cpld;
+
+ cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
+ if (cpld)
+ cpld_base = of_iomap(cpld, 0);
+ else
+ printk(KERN_ERR "Can't find CPLD in device tree\n");
+
+ if (ppc_md.progress)
+ ppc_md.progress("ksi8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+ cpm2_reset();
+ init_ioports();
+#endif
+}
+
+static void ksi8560_show_cpuinfo(struct seq_file *m)
+{
+ uint pvid, svid, phid1;
+ uint memsize = total_memory;
+
+ pvid = mfspr(SPRN_PVR);
+ svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
+ seq_printf(m, "Board\t\t: KSI8560\n");
+
+ if (cpld_base) {
+ seq_printf(m, "Hardware rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_HVR));
+ seq_printf(m, "CPLD rev\t: %d\n",
+ in_8(cpld_base + KSI8560_CPLD_PVR));
+ } else
+ seq_printf(m, "Unknown Hardware and CPLD revs\n");
+
+ seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+ /* Display cpu Pll setting */
+ phid1 = mfspr(SPRN_HID1);
+ seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+ /* Display the amount of memory */
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+ { .type = "soc", },
+ { .name = "cpm", },
+ { .name = "localbus", },
+ {},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+ of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+ return 0;
+}
+machine_device_initcall(ksi8560, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ksi8560_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "emerson,KSI8560");
+}
+
+define_machine(ksi8560) {
+ .name = "KSI8560",
+ .probe = ksi8560_probe,
+ .setup_arch = ksi8560_setup_arch,
+ .init_IRQ = ksi8560_pic_init,
+ .show_cpuinfo = ksi8560_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = machine_restart,
+ .calibrate_decr = generic_calibrate_decr,
+};
#undef DEBUG
#ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
#else
#define DBG(fmt, args...)
#endif
/* Processor frequency is MHz.
*/
- ppc_tb_freq = 50000000;
- if (!get_freq("bus-frequency", &ppc_tb_freq)) {
- printk(KERN_ERR "WARNING: Estimating decrementer frequency "
- "(not found)\n");
- }
- ppc_tb_freq /= 16;
ppc_proc_freq = 50000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
printk(KERN_ERR "WARNING: Estimating processor frequency "
"(not found)\n");
+ ppc_tb_freq = ppc_proc_freq / 16;
printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
/* Perform some more timer/timebase initialization. This used
bool "AMCC 40x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config 44x
bool "AMCC 44x"
select PPC_DCR_NATIVE
select PPC_UDBG_16550
+ select 4xx_SOC
config E200
bool "Freescale e200"
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/udbg.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/cell-regs.h>
segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
pr_debug("%s: iommu[%d]: segments: %lu\n",
- __FUNCTION__, iommu->nid, segments);
+ __func__, iommu->nid, segments);
/* set up the segment table */
stab_size = segments * sizeof(unsigned long);
(1 << 12) / sizeof(unsigned long));
ptab_size = segments * pages_per_segment * sizeof(unsigned long);
- pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
+ pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
iommu->nid, ptab_size, get_order(ptab_size));
page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
BUG_ON(!page);
n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
- __FUNCTION__, iommu->nid, iommu->stab, ptab,
+ __func__, iommu->nid, iommu->stab, ptab,
n_pte_pages);
/* initialise the STEs */
if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
panic("%s: missing IOC register mappings for node %d\n",
- __FUNCTION__, iommu->nid);
+ __func__, iommu->nid);
iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
break;
default:
printk(KERN_WARNING "%s: unknown configuration\n",
- __FUNCTION__);
+ __func__);
break;
}
mtspr(SPRN_TSC_CELL, thread_switch_control);
(unsigned int)(addr >> 32),
(unsigned int)(addr & 0xffffffff))) {
printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
- __FUNCTION__, nid);
+ __func__, nid);
goto out_free_pages;
}
if (!size)
return -ENODEV;
- pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+ pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
order = get_order(*size);
of_node_put(np);
const u32 *nid = of_get_property(np, "node-id", NULL);
if (!nid) {
printk(KERN_ERR "%s: node %s is missing node-id?\n",
- __FUNCTION__, np->full_name);
+ __func__, np->full_name);
continue;
}
cbe_ptcal_enable_on_node(*nid, order);
struct ptcal_area *area, *tmp;
int ret = 0;
- pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+ pr_debug("%s: disabling PTCAL\n", __func__);
list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
/* disable ptcal on this node */
if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
printk(KERN_ERR "%s: error disabling PTCAL "
- "on node %d!\n", __FUNCTION__,
+ "on node %d!\n", __func__,
area->nid);
ret = -EIO;
continue;
struct spu_slb slb;
int psize;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
{
- pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
+ pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
/* Handle kernel space hash faults immediately.
User hash faults need to be deferred to process context. */
__spu_trap_data_seg(spu, dar);
spin_unlock(&spu->register_lock);
- pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
+ pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
dar, dsisr);
if (stat & CLASS1_STORAGE_FAULT_INTR)
if (ret < 0) {
printk(KERN_WARNING "%s: Error initializing spus\n",
- __FUNCTION__);
+ __func__);
goto out_unregister_sysdev_class;
}
long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
- pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+ pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
return -ENOSYS;
}
tmp = of_get_property(np->parent->parent, "node-id", NULL);
if (!tmp) {
- printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: can't find node-id\n", __func__);
nid = spu->node;
} else
nid = tmp[0];
ret = fn(node);
if (ret) {
printk(KERN_WARNING "%s: Error initializing %s\n",
- __FUNCTION__, node->name);
+ __func__, node->name);
break;
}
n++;
if (!legacy_map) {
legacy_map = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying to map old style\n", __FUNCTION__);
+ "trying to map old style\n", __func__);
}
ret = spu_map_device_old(spu);
if (ret) {
if (!legacy_irq) {
legacy_irq = 1;
printk(KERN_WARNING "%s: Legacy device tree found, "
- "trying old style irq\n", __FUNCTION__);
+ "trying old style irq\n", __func__);
}
ret = spu_map_interrupts_old(spu, spe);
if (ret) {
wake_up_all(&ctx->mfc_wq);
- pr_debug("%s %s\n", __FUNCTION__, spu->name);
+ pr_debug("%s %s\n", __func__, spu->name);
if (ctx->mfc_fasync) {
u32 free_elements, tagstatus;
unsigned int mask;
if (tagstatus & ctx->tagwait)
mask |= POLLIN | POLLRDNORM;
- pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+ pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
free_elements, tagstatus, ctx->tagwait);
return mask;
!= MFC_CNTL_PURGE_DMA_COMPLETE) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out;
}
status_loading) {
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "%s: timeout waiting for loader\n",
- __FUNCTION__);
+ __func__);
ret = -EIO;
goto out_drop_priv;
}
if (!(status & SPU_STATUS_RUNNING)) {
/* If isolated LOAD has failed: run SPU, we will get a stop-and
* signal later. */
- pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
+ pr_debug("%s: isolated LOAD failed\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
ret = -EACCES;
goto out_drop_priv;
if (!(status & SPU_STATUS_ISOLATED_STATE)) {
/* This isn't allowed by the CBEA, but check anyway */
- pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
+ pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
ret = -EINVAL;
goto out_drop_priv;
break;
default:
printk(KERN_WARNING "%s: unexpected return code %ld\n",
- __FUNCTION__, *spu_ret);
+ __func__, *spu_ret);
ret = 0;
}
return ret;
}
u64 beat_halt_code = 0x1000000000000000UL;
+EXPORT_SYMBOL(beat_halt_code);
void beat_halt(void)
{
len = count;
if (len > BEAT_NVRW_CNT)
len = BEAT_NVRW_CNT;
- if (beat_eeprom_read(i, len, p)) {
+ if (beat_eeprom_read(i, len, p))
return -EIO;
- }
p += len;
i += len;
len = count;
if (len > BEAT_NVRW_CNT)
len = BEAT_NVRW_CNT;
- if (beat_eeprom_write(i, len, p)) {
+ if (beat_eeprom_write(i, len, p))
return -EIO;
- }
p += len;
i += len;
u64 db[2];
s64 ret;
- ret = beat_get_characters_from_console(vterm, len, (u8*)db);
+ ret = beat_get_characters_from_console(vterm, len, (u8 *)db);
if (ret == 0) {
*t1 = db[0];
*t2 = db[1];
}
return ret;
}
+EXPORT_SYMBOL(beat_get_term_char);
int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
{
db[0] = t1;
db[1] = t2;
- return beat_put_characters_to_console(vterm, len, (u8*)db);
+ return beat_put_characters_to_console(vterm, len, (u8 *)db);
}
+EXPORT_SYMBOL(beat_put_term_char);
void beat_power_save(void)
{
}
device_initcall(beat_event_init);
-
-EXPORT_SYMBOL(beat_get_term_char);
-EXPORT_SYMBOL(beat_put_term_char);
-EXPORT_SYMBOL(beat_halt_code);
#ifndef _CELLEB_BEAT_H
#define _CELLEB_BEAT_H
-int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
-int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
+int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
+int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
int64_t beat_repository_encode(int, const char *, uint64_t[4]);
void beat_restart(char *);
void beat_power_off(void);
u64 b[2];
memcpy(b, buffer, len);
- return beat_hcall_norets(HV_put_characters_to_console, termno, len, b[0], b[1]);
+ return beat_hcall_norets(HV_put_characters_to_console, termno, len,
+ b[0], b[1]);
}
static inline s64 beat_get_spe_privileged_state_1_registers(
#include "beat_wrapper.h"
#ifdef DEBUG_LOW
-#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
+#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0)
#else
-#define DBG_LOW(fmt...) do { } while(0)
+#define DBG_LOW(fmt...) do { } while (0)
#endif
static DEFINE_SPINLOCK(beat_htab_lock);
hpte_r &= ~_PAGE_COHERENT;
spin_lock(&beat_htab_lock);
- if ((lpar_rc = beat_read_mask(hpte_group)) == 0) {
+ lpar_rc = beat_read_mask(hpte_group);
+ if (lpar_rc == 0) {
if (!(vflags & HPTE_V_BOLTED))
DBG_LOW(" full\n");
spin_unlock(&beat_htab_lock);
static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64];
static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64];
-static struct irq_host *beatic_host = NULL;
+static struct irq_host *beatic_host;
/*
* In this implementation, "virq" == "IRQ plug number",
off = (irq_plug / 256) * 4;
masks[0] = beatic_irq_mask_enable[off + 0]
- & beatic_irq_mask_ack[off + 0];
+ & beatic_irq_mask_ack[off + 0];
masks[1] = beatic_irq_mask_enable[off + 1]
- & beatic_irq_mask_ack[off + 1];
+ & beatic_irq_mask_ack[off + 1];
masks[2] = beatic_irq_mask_enable[off + 2]
- & beatic_irq_mask_ack[off + 2];
+ & beatic_irq_mask_ack[off + 2];
masks[3] = beatic_irq_mask_enable[off + 3]
- & beatic_irq_mask_ack[off + 3];
+ & beatic_irq_mask_ack[off + 3];
if (beat_set_interrupt_mask(irq_plug&~255UL,
masks[0], masks[1], masks[2], masks[3]) != 0)
panic("Failed to set mask IRQ!");
s64 err;
unsigned long flags;
- if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) {
+ err = beat_downcount_of_interrupt(irq_plug);
+ if (err != 0) {
if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
panic("Failed to downcount IRQ! Error = %16lx", err);
struct irq_desc *desc = get_irq_desc(virq);
int64_t err;
- if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0)
+ err = beat_construct_and_connect_irq_plug(virq, hw);
+ if (err < 0)
return -EIO;
desc->status |= IRQ_LEVEL;
beat_detect_pending_interrupts(i, pending);
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[0] & beatic_irq_mask_enable[i/64+0]
- & beatic_irq_mask_ack[i/64+0]));
+ & beatic_irq_mask_ack[i/64+0]));
if (ub != 64)
return i + ub + 0;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[1] & beatic_irq_mask_enable[i/64+1]
- & beatic_irq_mask_ack[i/64+1]));
+ & beatic_irq_mask_ack[i/64+1]));
if (ub != 64)
return i + ub + 64;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[2] & beatic_irq_mask_enable[i/64+2]
- & beatic_irq_mask_ack[i/64+2]));
+ & beatic_irq_mask_ack[i/64+2]));
if (ub != 64)
return i + ub + 128;
__asm__ ("cntlzd %0,%1":"=r"(ub):
"r"(pending[3] & beatic_irq_mask_enable[i/64+3]
- & beatic_irq_mask_ack[i/64+3]));
+ & beatic_irq_mask_ack[i/64+3]));
if (ub != 64)
return i + ub + 192;
}
/* Allocate an irq host */
beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
- &beatic_pic_host_ops,
+ &beatic_pic_host_ops,
0);
BUG_ON(beatic_host == NULL);
irq_set_default_host(beatic_host);
if (bus != hose->bus)
addr = celleb_epci_get_epci_cfg(hose) +
(((bus->number & 0xff) << 16)
- | ((devfn & 0xff) << 8)
- | (where & 0xff)
- | 0x01000000);
+ | ((devfn & 0xff) << 8)
+ | (where & 0xff)
+ | 0x01000000);
else
addr = celleb_epci_get_epci_cfg(hose) +
(((devfn & 0xff) << 8) | (where & 0xff));
}
static int celleb_epci_read_config(struct pci_bus *bus,
- unsigned int devfn, int where, int size, u32 * val)
+ unsigned int devfn, int where, int size, u32 *val)
{
PCI_IO_ADDR epci_base;
PCI_IO_ADDR addr;
/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
mmio=0xfff000-0x1000,0xff2000-0x1000 */
-static int txx9_serial_bitmap __initdata = 0;
+static int txx9_serial_bitmap __initdata;
static struct {
uint32_t offset;
int i;
for (;;) {
- switch(get_option(&ptr, &i)) {
+ switch (get_option(&ptr, &i)) {
default:
return 0;
case 2:
return enable;
}
-const struct spu_priv1_ops spu_priv1_beat_ops =
-{
+const struct spu_priv1_ops spu_priv1_beat_ops = {
.int_mask_and = int_mask_and,
.int_mask_or = int_mask_or,
.int_mask_set = int_mask_set,
if (inbuflen == 0) {
/* get some more chars. */
inbuflen = 0;
- rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1);
+ rc = beat_get_term_char(celleb_vtermno, &inbuflen,
+ inbuf+0, inbuf+1);
if (rc != 0)
inbuflen = 0; /* otherwise inbuflen is garbage */
}
if (ch == -1) {
/* This shouldn't be needed...but... */
volatile unsigned long delay;
- for (delay=0; delay < 2000000; delay++)
+ for (delay = 0; delay < 2000000; delay++)
;
} else {
return ch;
}
if (mpic_paddr == 0) {
- printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+ printk("%s: No tsi108 PIC found !\n", __func__);
return;
}
- DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
(u32) mpic_paddr);
mpic = mpic_alloc(tsi_pic, mpic_paddr,
#ifdef CONFIG_PCI
tsi_pci = of_find_node_by_type(NULL, "pci");
if (tsi_pci == NULL) {
- printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci node found !\n", __func__);
return;
}
cascade_node = of_find_node_by_type(NULL, "pic-router");
if (cascade_node == NULL) {
- printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+ printk("%s: No tsi108 pci cascade node found !\n", __func__);
return;
}
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
- DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+ DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
(u32) cascade_pci_irq);
tsi108_pci_int_init(cascade_node);
set_irq_data(cascade_pci_irq, mpic);
* ioremap mpp and gpp registers in case they are later
* needed by prpmc2800_reset_board().
*/
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", NULL);
paddr = of_translate_address(np, reg);
of_node_put(np);
.globl system_reset_iSeries
system_reset_iSeries:
- mfspr r13,SPRN_SPRG3 /* Get paca address */
+ mfspr r13,SPRN_SPRG3 /* Get alpaca address */
+ LOAD_REG_IMMEDIATE(r23, alpaca)
+ li r0,ALPACA_SIZE
+ sub r23,r13,r23
+ divdu r23,r23,r0 /* r23 has cpu number */
+ LOAD_REG_IMMEDIATE(r13, paca)
+ mulli r0,r23,PACA_SIZE
+ add r13,r13,r0
+ mtspr SPRN_SPRG3,r13 /* Save it away for the future */
mfmsr r24
ori r24,r24,MSR_RI
mtmsrd r24 /* RI on */
- lhz r24,PACAPACAINDEX(r13) /* Get processor # */
+ mr r24,r23
cmpwi 0,r24,0 /* Are we processor 0? */
bne 1f
b .__start_initialization_iSeries /* Start up the first processor */
u64 xRsvd13; // Reserved x38-x3F
};
-extern struct ItIplParmsReal xItIplParmsReal;
-
#endif /* _ISERIES_IPL_PARMS_H */
#include <asm/ptrace.h>
#include <asm/abs_addr.h>
#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#include <asm/paca.h>
#include <asm/iseries/lpar_map.h>
#include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/alpaca.h>
#include "naca.h"
#include "vpd_areas.h"
/* The HvReleaseData is the root of the information shared between
* the hypervisor and Linux.
*/
-struct HvReleaseData hvReleaseData = {
+const struct HvReleaseData hvReleaseData = {
.xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */
.xSize = sizeof(struct HvReleaseData),
.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
.xRamDiskSize = 0,
};
+struct ItLpRegSave {
+ u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
+ u16 xSize; // Size of this class 004-005
+ u8 xInUse; // Area is live 006-007
+ u8 xRsvd1[9]; // Reserved 007-00F
+
+ u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
+ u32 xCTRL; // Control Register 170-173
+ u32 xDEC; // Decrementer 174-177
+ u32 xFPSCR; // FP Status and Control Reg 178-17B
+ u32 xPVR; // Processor Version Number 17C-17F
+
+ u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
+ u32 xPMC1; // Perf Monitor Counter 1 188-18B
+ u32 xPMC2; // Perf Monitor Counter 2 18C-18F
+ u32 xPMC3; // Perf Monitor Counter 3 190-193
+ u32 xPMC4; // Perf Monitor Counter 4 194-197
+ u32 xPIR; // Processor ID Reg 198-19B
+
+ u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
+ u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
+ u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
+ u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
+ u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
+ u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
+ u32 xTSC; // Thread Switch Control 1B4-1B7
+ u32 xTST; // Thread Switch Timeout 1B8-1BB
+ u32 xRsvd; // Reserved 1BC-1BF
+
+ u64 xACCR; // Address Compare Control Reg 1C0-1C7
+ u64 xIMR; // Instruction Match Register 1C8-1CF
+ u64 xSDR1; // Storage Description Reg 1 1D0-1D7
+ u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
+ u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
+ u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
+ u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
+ u64 xTB; // Time Base Register 1F8-1FF
+
+ u64 xFPR[32]; // Floating Point Registers 200-2FF
+
+ u64 xMSR; // Machine State Register 300-307
+ u64 xNIA; // Next Instruction Address 308-30F
+
+ u64 xDABR; // Data Address Breakpoint Reg 310-317
+ u64 xIABR; // Inst Address Breakpoint Reg 318-31F
+
+ u64 xHID0; // HW Implementation Dependent0 320-327
+
+ u64 xHID4; // HW Implementation Dependent4 328-32F
+ u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
+ u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
+ u64 xSDAR; // Sample Data Address Register 340-347
+ u64 xSIAR; // Sample Inst Address Register 348-34F
+
+ u8 xRsvd3[176]; // Reserved 350-3FF
+};
+
extern void system_reset_iSeries(void);
extern void machine_check_iSeries(void);
extern void data_access_iSeries(void);
};
/* May be filled in by the hypervisor so cannot end up in the BSS */
-struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
+static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
/* May be filled in by the hypervisor so cannot end up in the BSS */
struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));
/* Space for Recovery Log Buffer */
/* May be filled in by the hypervisor so cannot end up in the BSS */
-u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
+static u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
-struct SpCommArea xSpCommArea = {
+static const struct SpCommArea xSpCommArea = {
.xDesc = 0xE2D7C3C2,
.xFormat = 1,
};
+static const struct ItLpRegSave iseries_reg_save[] = {
+ [0 ... (NR_CPUS-1)] = {
+ .xDesc = 0xd397d9e2, /* "LpRS" */
+ .xSize = sizeof(struct ItLpRegSave),
+ },
+};
+
+#define ALPACA_INIT(number) \
+{ \
+ .lppaca_ptr = &lppaca[number], \
+ .reg_save_ptr = &iseries_reg_save[number], \
+}
+
+const struct alpaca alpaca[] = {
+ ALPACA_INIT( 0),
+#if NR_CPUS > 1
+ ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3),
+#if NR_CPUS > 4
+ ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7),
+#if NR_CPUS > 8
+ ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11),
+ ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15),
+ ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19),
+ ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23),
+ ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27),
+ ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31),
+#if NR_CPUS > 32
+ ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35),
+ ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39),
+ ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43),
+ ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47),
+ ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51),
+ ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55),
+ ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59),
+ ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63),
+#endif
+#endif
+#endif
+#endif
+};
+
/* The LparMap data is now located at offset 0x6000 in head.S
* It was put there so that the HvReleaseData could address it
* with a 32-bit offset as required by the iSeries hypervisor
* the Naca via the HvReleaseData area. The HvReleaseData has the
* offset into the Naca of the pointer to the ItVpdAreas.
*/
-struct ItVpdAreas itVpdAreas = {
+const struct ItVpdAreas itVpdAreas = {
.xSlicDesc = 0xc9a3e5c1, /* "ItVA" */
.xSlicSize = sizeof(struct ItVpdAreas),
.xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */
.xSlicVpdLens = { /* VPD lengths */
0,0,0, /* 0 - 2 */
sizeof(xItExtVpdPanel), /* 3 Extended VPD */
- sizeof(struct paca_struct), /* 4 length of Paca */
+ sizeof(struct alpaca), /* 4 length of (fake) Paca */
0, /* 5 */
sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */
26992, /* 7 length of MS VPD */
.xSlicVpdAdrs = { /* VPD addresses */
0,0,0, /* 0 - 2 */
&xItExtVpdPanel, /* 3 Extended VPD */
- &paca[0], /* 4 first Paca */
+ &alpaca[0], /* 4 first (fake) Paca */
0, /* 5 */
&xItIplParmsReal, /* 6 IPL parms */
&xMsVpd, /* 7 MS Vpd */
0,0
}
};
-
-struct ItLpRegSave iseries_reg_save[] = {
- [0 ... (NR_CPUS-1)] = {
- .xDesc = 0xd397d9e2, /* "LpRS" */
- .xSize = sizeof(struct ItLpRegSave),
- },
-};
struct naca_struct {
/* Kernel only data - undefined for user space */
- void *xItVpdAreas; /* VPD Data 0x00 */
+ const void *xItVpdAreas; /* VPD Data 0x00 */
void *xRamDisk; /* iSeries ramdisk 0x08 */
u64 xRamDiskSize; /* In pages 0x10 */
};
#undef DEBUG
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/string.h>
static unsigned long last_jiffies;
static int num_printed;
- if ((jiffies - last_jiffies) > 60 * HZ) {
+ if (time_after(jiffies, last_jiffies + 60 * HZ)) {
last_jiffies = jiffies;
num_printed = 0;
}
char xRsvd3[20]; /* Reserved x2C-x3F */
};
-extern struct HvReleaseData hvReleaseData;
+extern const struct HvReleaseData hvReleaseData;
#endif /* _ISERIES_RELEASE_DATA_H */
u8 xRsvd2[80]; // Reserved 030-07F
};
-extern struct SpCommArea xSpCommArea;
-
#endif /* _ISERIES_SPCOMM_AREA_H */
u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7
u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF
u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F
- void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
+ const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
};
-extern struct ItVpdAreas itVpdAreas;
+extern const struct ItVpdAreas itVpdAreas;
#endif /* _ISERIES_VPD_AREAS_H */
}
return irq;
}
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
- if (!machine_is(maple))
- return;
-
-#if 0 /* Enable this to enable IDE port 0 */
- {
- u8 v;
-
- pci_read_config_byte(dev, 0x40, &v);
- v |= 2;
- pci_write_config_byte(dev, 0x40, v);
- }
-#endif
-#if 0 /* fix bus master base */
- pci_write_config_dword(dev, 0x20, 0xcc01);
- printk("old ide resource: %lx -> %lx \n",
- dev->resource[4].start, dev->resource[4].end);
- dev->resource[4].start = 0xcc00;
- dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
- {
- struct pci_dev *apicdev;
- u32 v;
-
- apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
- if (apicdev == NULL)
- printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
- else {
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
- pci_read_config_dword(apicdev, 0xf4, &v);
- v &= ~0x00000022;
- pci_write_config_dword(apicdev, 0xf4, v);
- pci_dev_put(apicdev);
- }
- }
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
- fixup_maple_ide);
#include <linux/smp.h>
#include <linux/bitops.h>
#include <linux/of_device.h>
+#include <linux/lmb.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/dma.h>
#include <asm/cputable.h>
#include <asm/time.h>
-#include <asm/lmb.h>
#include <asm/mpic.h>
#include <asm/rtas.h>
#include <asm/udbg.h>
return 1;
}
-define_machine(maple_md) {
+define_machine(maple) {
.name = "Maple",
.probe = maple_probe,
.setup_arch = maple_setup_arch,
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#define MAX_TXCH 64
#define MAX_RXCH 64
+#define MAX_FLAGS 64
+#define MAX_FUN 8
static struct pasdma_status *dma_status;
static DECLARE_BITMAP(txch_free, MAX_TXCH);
static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
/* pasemi_read_iob_reg - read IOB register
* @reg: Register to read (offset into PCI CFG space)
}
EXPORT_SYMBOL(pasemi_dma_free_buf);
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, flags_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+ BUG_ON(test_bit(flag, flags_free));
+ BUG_ON(flag >= MAX_FLAGS);
+ set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+ BUG_ON(flag >= MAX_FLAGS);
+ if (flag < 32)
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+ else
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+ int bit;
+
+retry:
+ bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+ if (bit >= MAX_FLAGS)
+ return -ENOSPC;
+ if (!test_and_clear_bit(bit, fun_free))
+ goto retry;
+
+ return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+ BUG_ON(test_bit(fun, fun_free));
+ BUG_ON(fun >= MAX_FLAGS);
+ set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
static void *map_onedev(struct pci_dev *p, int index)
{
struct device_node *dn;
struct resource res;
struct device_node *dn;
int i, intf, err = 0;
+ unsigned long timeout;
u32 tmp;
if (!machine_is(pasemi))
for (i = 0; i < MAX_RXCH; i++)
__set_bit(i, rxch_free);
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable RX section\n");
+ break;
+ }
+ }
+
+ timeout = jiffies + HZ;
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+ while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+ if (time_after(jiffies, timeout)) {
+ pr_warning("Warning: Could not disable TX section\n");
+ break;
+ }
+ }
+
+ /* setup resource allocations for the different DMA sections */
+ tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+ pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+ /* enable tx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+ /* enable rx section */
+ pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
+ for (i = 0; i < MAX_FLAGS; i++)
+ __set_bit(i, flags_free);
+
+ for (i = 0; i < MAX_FUN; i++)
+ __set_bit(i, fun_free);
+
+ /* clear all status flags */
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+ pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
"(%d tx, %d rx channels)\n", num_txch, num_rxch);
/*
- * Copyright (C) 2005-2007, PA Semi, Inc
+ * Copyright (C) 2005-2008, PA Semi, Inc
*
* Maintained by: Olof Johansson <olof@lixom.net>
*
#include <asm/abs_addr.h>
#include <asm/firmware.h>
-
#define IOBMAP_PAGE_SHIFT 12
#define IOBMAP_PAGE_SIZE (1 << IOBMAP_PAGE_SHIFT)
#define IOBMAP_PAGE_MASK (IOBMAP_PAGE_SIZE - 1)
#define IOB_BASE 0xe0000000
#define IOB_SIZE 0x3000
/* Configuration registers */
-#define IOBCAP_REG 0x10
-#define IOBCOM_REG 0x40
+#define IOBCAP_REG 0x40
+#define IOBCOM_REG 0x100
/* Enable IOB address translation */
#define IOBCOM_ATEN 0x00000100
/* Address decode configuration register */
-#define IOB_AD_REG 0x53
+#define IOB_AD_REG 0x14c
/* IOBCOM_AD_REG fields */
#define IOB_AD_VGPRT 0x00000e00
#define IOB_AD_VGAEN 0x00000100
#define IOB_AD_TRNG_2G 0x00000001
#define IOB_AD_TRNG_128G 0x00000003
-#define IOB_TABLEBASE_REG 0x55
+#define IOB_TABLEBASE_REG 0x154
/* Base of the 64 4-byte L1 registers */
-#define IOB_XLT_L1_REGBASE 0xac0
+#define IOB_XLT_L1_REGBASE 0x2b00
/* Register to invalidate TLB entries */
-#define IOB_AT_INVAL_TLB_REG 0xb40
+#define IOB_AT_INVAL_TLB_REG 0x2d00
/* The top two bits of the level 1 entry contains valid and type flags */
#define IOBMAP_L1E_V 0x40000000
#define IOBMAP_L2E_V 0x80000000
#define IOBMAP_L2E_V_CACHED 0xc0000000
-static u32 __iomem *iob;
+static void __iomem *iob;
static u32 iob_l1_emptyval;
static u32 iob_l2_emptyval;
static u32 *iob_l2_base;
for (i = 0; i < 64; i++) {
/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
- out_le32(iob+IOB_XLT_L1_REGBASE+i, regword);
+ out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
}
/* set 2GB translation window, based at 0 */
#include <linux/suspend.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
+#include <linux/lmb.h>
#include <asm/reg.h>
#include <asm/sections.h>
#include <asm/iommu.h>
#include <asm/smu.h>
#include <asm/pmc.h>
-#include <asm/lmb.h>
#include <asm/udbg.h>
#include "pmac.h"
}
/**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
*/
-static int ps3_register_repository_device(
- const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
{
int result;
switch (repo->dev_type) {
- case PS3_DEV_TYPE_SB_GELIC:
- result = ps3_setup_gelic_device(repo);
- if (result) {
- pr_debug("%s:%d ps3_setup_gelic_device failed\n",
- __func__, __LINE__);
- }
- break;
- case PS3_DEV_TYPE_SB_USB:
-
- /* Each USB device has both an EHCI and an OHCI HC */
-
- result = ps3_setup_ehci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ehci_device failed\n",
- __func__, __LINE__);
- }
-
- result = ps3_setup_ohci_device(repo);
-
- if (result) {
- pr_debug("%s:%d ps3_setup_ohci_device failed\n",
- __func__, __LINE__);
- }
- break;
case PS3_DEV_TYPE_STOR_DISK:
result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
return result;
}
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+ int result;
+
+ switch (repo->dev_type) {
+ case PS3_DEV_TYPE_SB_GELIC:
+ result = ps3_setup_gelic_device(repo);
+ if (result) {
+ pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+ case PS3_DEV_TYPE_SB_USB:
+
+ /* Each USB device has both an EHCI and an OHCI HC */
+
+ result = ps3_setup_ehci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+ __func__, __LINE__);
+ }
+
+ result = ps3_setup_ohci_device(repo);
+
+ if (result) {
+ pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+ __func__, __LINE__);
+ }
+ break;
+
+ default:
+ return ps3_setup_dynamic_device(repo);
+ }
+
+ return result;
+}
+
static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
{
struct ps3_repository_device repo;
pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
__func__, __LINE__, bus_id, dev_id, retries);
- ps3_register_repository_device(&repo);
+ ps3_setup_dynamic_device(&repo);
return;
}
ps3_register_graphics_devices();
- ps3_repository_find_devices(PS3_BUS_TYPE_SB,
- ps3_register_repository_device);
+ ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
ps3_register_sound_devices();
*/
#include <linux/kernel.h>
+#include <linux/lmb.h>
#include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/ps3fb.h>
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
- if (unlikely(plug) == NO_IRQ) {
+ if (unlikely(plug == NO_IRQ)) {
pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/memory_hotplug.h>
+#include <linux/lmb.h>
#include <asm/firmware.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <linux/fs.h>
#include <linux/syscalls.h>
#include <linux/ctype.h>
+#include <linux/lmb.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
#include "platform.h"
ps3_sys_manager_power_off(); /* never returns */
}
+static void ps3_halt(void)
+{
+ DBG("%s:%d\n", __func__, __LINE__);
+
+ smp_send_stop();
+ ps3_sys_manager_halt(); /* never returns */
+}
+
static void ps3_panic(char *str)
{
DBG("%s:%d %s\n", __func__, __LINE__, str);
printk(" Please press POWER button.\n");
printk("\n");
- while(1);
+ while(1)
+ lv1_pause(1);
}
#if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
if (!p->address) {
- printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+ printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
p->name);
return;
}
.progress = ps3_progress,
.restart = ps3_restart,
.power_off = ps3_power_off,
+ .halt = ps3_halt,
#if defined(CONFIG_KEXEC)
.kexec_cpu_down = ps3_kexec_cpu_down,
.machine_kexec = default_machine_kexec,
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/lv1call.h>
+#include <asm/ps3.h>
#include "../cell/spufs/spufs.h"
#include "platform.h"
pr_debug("%s:%d: shadow: %lxh\n", func, line, shadow);
}
+inline u64 ps3_get_spe_id(void *arg)
+{
+ return spu_pdata(arg)->spe_id;
+}
+EXPORT_SYMBOL_GPL(ps3_get_spe_id);
+
static unsigned long get_vas_id(void)
{
unsigned long id;
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
unsigned int rets[3];
struct eeh_early_enable_info *info = data;
int ret;
- const char *status = of_get_property(dn, "status", NULL);
const u32 *class_code = of_get_property(dn, "class-code", NULL);
const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
const u32 *device_id = of_get_property(dn, "device-id", NULL);
pdn->eeh_freeze_count = 0;
pdn->eeh_false_positives = 0;
- if (status && strncmp(status, "ok", 2) != 0)
- return NULL; /* ignore devices with bad status */
+ if (!of_device_is_available(dn))
+ return NULL;
/* Ignore bad nodes. */
if (!class_code || !vendor_id || !device_id)
#include <asm/smp.h>
#include "plpar_wrappers.h"
+#include "pseries.h"
#ifdef DEBUG_LOW
#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
struct device_node *stdout_node;
const u32 *termno;
const char *name;
- int add_console;
/* find the boot console from /chosen/stdout */
if (!of_chosen)
printk(KERN_WARNING "stdout node missing 'name' property!\n");
goto out;
}
- /* The user has requested a console so this is already set up. */
- add_console = !strstr(cmd_line, "console=");
/* Check if it's a virtual terminal */
if (strncmp(name, "vty", 3) != 0)
udbg_putc = udbg_putcLP;
udbg_getc = udbg_getcLP;
udbg_getc_poll = udbg_getc_pollLP;
- if (add_console)
- add_preferred_console("hvc", termno[0] & 0xff, NULL);
+ add_preferred_console("hvc", termno[0] & 0xff, NULL);
} else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
vtermno = termno[0];
udbg_putc = udbg_hvsi_putc;
udbg_getc = udbg_hvsi_getc;
udbg_getc_poll = udbg_hvsi_getc_poll;
- if (add_console)
- add_preferred_console("hvsi", termno[0] & 0xff, NULL);
+ add_preferred_console("hvsi", termno[0] & 0xff, NULL);
}
out:
of_node_put(stdout_node);
BUG_ON(lpar_rc != H_SUCCESS);
}
+static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+ int psize, int ssize)
+{
+ unsigned long slot, vsid, va;
+
+ vsid = get_kernel_vsid(ea, ssize);
+ va = hpt_va(ea, vsid, ssize);
+
+ slot = pSeries_lpar_hpte_find(va, psize, ssize);
+ BUG_ON(slot == -1);
+
+ pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+}
+
/* Flag bits for H_BULK_REMOVE */
#define HBR_REQUEST 0x4000000000000000UL
#define HBR_RESPONSE 0x8000000000000000UL
ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
ppc_md.hpte_insert = pSeries_lpar_hpte_insert;
ppc_md.hpte_remove = pSeries_lpar_hpte_remove;
+ ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
ppc_md.flush_hash_range = pSeries_lpar_flush_hash_range;
ppc_md.hpte_clear_all = pSeries_lpar_hptab_clear;
}
/* Add to children of PCI bridge dev->bus */
child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
if (!child_bus) {
- printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+ printk (KERN_ERR "%s: could not add second bus\n", __func__);
return -EIO;
}
sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
--- /dev/null
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/sysfs.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/* Variables, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_vars;
+struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
+
+static int ibm_configure_kernel_dump;
+/* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+ u32 dump_flags;
+ u16 source_type;
+ u16 error_flags;
+ u64 source_address;
+ u64 source_length;
+ u64 length_copied;
+ u64 destination_address;
+};
+
+struct phyp_dump_header {
+ u32 version;
+ u16 num_of_sections;
+ u16 status;
+
+ u32 first_offset_section;
+ u32 dump_disk_section;
+ u64 block_num_dd;
+ u64 num_of_blocks_dd;
+ u32 offset_dd;
+ u32 maxtime_to_auto;
+ /* No dump disk path string used */
+
+ struct dump_section cpu_data;
+ struct dump_section hpte_data;
+ struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS 3
+#define DUMP_HEADER_VERSION 0x1
+#define DUMP_REQUEST_FLAG 0x1
+#define DUMP_SOURCE_CPU 0x0001
+#define DUMP_SOURCE_HPTE 0x0002
+#define DUMP_SOURCE_RMO 0x0011
+#define DUMP_ERROR_FLAG 0x2000
+#define DUMP_TRIGGERED 0x4000
+#define DUMP_PERFORMED 0x8000
+
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+ unsigned long addr_offset = 0;
+
+ /* Set up the dump header */
+ ph->version = DUMP_HEADER_VERSION;
+ ph->num_of_sections = NUM_DUMP_SECTIONS;
+ ph->status = 0;
+
+ ph->first_offset_section =
+ (u32)offsetof(struct phyp_dump_header, cpu_data);
+ ph->dump_disk_section = 0;
+ ph->block_num_dd = 0;
+ ph->num_of_blocks_dd = 0;
+ ph->offset_dd = 0;
+
+ ph->maxtime_to_auto = 0; /* disabled */
+
+ /* The first two sections are mandatory */
+ ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+ ph->cpu_data.source_address = 0;
+ ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+ ph->cpu_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->cpu_state_size;
+
+ ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+ ph->hpte_data.source_address = 0;
+ ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+ ph->hpte_data.destination_address = addr_offset;
+ addr_offset += phyp_dump_info->hpte_region_size;
+
+ /* This section describes the low kernel region */
+ ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+ ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+ ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+ ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+ ph->kernel_data.destination_address = addr_offset;
+ addr_offset += ph->kernel_data.source_length;
+
+ return addr_offset;
+}
+
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+ printk(KERN_INFO "dump header:\n");
+ /* setup some ph->sections required */
+ printk(KERN_INFO "version = %d\n", ph->version);
+ printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+ printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+ /* No ph->disk, so all should be set to 0 */
+ printk(KERN_INFO "Offset to first section 0x%x\n",
+ ph->first_offset_section);
+ printk(KERN_INFO "dump disk sections should be zero\n");
+ printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+ printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+ printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+ printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+ printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+ /*set cpu state and hpte states as well scratch pad area */
+ printk(KERN_INFO " CPU AREA \n");
+ printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+ printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+ printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+ printk(KERN_INFO "cpu source_address =%lx\n",
+ ph->cpu_data.source_address);
+ printk(KERN_INFO "cpu source_length =%lx\n",
+ ph->cpu_data.source_length);
+ printk(KERN_INFO "cpu length_copied =%lx\n",
+ ph->cpu_data.length_copied);
+
+ printk(KERN_INFO " HPTE AREA \n");
+ printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+ printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+ printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+ printk(KERN_INFO "HPTE source_address =%lx\n",
+ ph->hpte_data.source_address);
+ printk(KERN_INFO "HPTE source_length =%lx\n",
+ ph->hpte_data.source_length);
+ printk(KERN_INFO "HPTE length_copied =%lx\n",
+ ph->hpte_data.length_copied);
+
+ printk(KERN_INFO " SRSD AREA \n");
+ printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+ printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+ printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+ printk(KERN_INFO "SRSD source_address =%lx\n",
+ ph->kernel_data.source_address);
+ printk(KERN_INFO "SRSD source_length =%lx\n",
+ ph->kernel_data.source_length);
+ printk(KERN_INFO "SRSD length_copied =%lx\n",
+ ph->kernel_data.length_copied);
+#endif
+}
+
+static ssize_t show_phyp_dump_active(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+
+ /* create filesystem entry so kdump is phyp-dump aware */
+ return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
+}
+
+static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
+ show_phyp_dump_active,
+ NULL);
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ /* ToDo Invalidate kdump and free memory range. */
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 1, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
+ "register\n", rc);
+ print_dump_header(ph);
+ return;
+ }
+
+ rc = sysfs_create_file(kernel_kobj, &pdl.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs"
+ " file (%d)\n", rc);
+}
+
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+ int rc;
+
+ /* Add addr value if not initialized before */
+ if (ph->cpu_data.destination_address == 0) {
+ ph->cpu_data.destination_address += addr;
+ ph->hpte_data.destination_address += addr;
+ ph->kernel_data.destination_address += addr;
+ }
+
+ do {
+ rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+ 2, ph, sizeof(struct phyp_dump_header));
+ } while (rtas_busy_delay(rc));
+
+ if (rc) {
+ printk(KERN_ERR "phyp-dump: unexpected error (%d) "
+ "on invalidate\n", rc);
+ print_dump_header(ph);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void release_memory_range(unsigned long start_pfn,
+ unsigned long nr_pages)
+{
+ struct page *rpage;
+ unsigned long end_pfn;
+ long i;
+
+ end_pfn = start_pfn + nr_pages;
+
+ for (i = start_pfn; i <= end_pfn; i++) {
+ rpage = pfn_to_page(i);
+ if (PageReserved(rpage)) {
+ ClearPageReserved(rpage);
+ init_page_count(rpage);
+ __free_page(rpage);
+ totalram_pages++;
+ }
+ }
+}
+
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+ static unsigned long scratch_area_size, reserved_area_size;
+
+ if (addr < phyp_dump_info->init_reserve_start)
+ return;
+
+ if ((addr >= phyp_dump_info->init_reserve_start) &&
+ (addr <= phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size))
+ reserved_area_size += length;
+
+ if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+ (addr <= phyp_dump_info->reserved_scratch_addr +
+ phyp_dump_info->reserved_scratch_size))
+ scratch_area_size += length;
+
+ if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+ (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+ invalidate_last_dump(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ register_dump_area(&phdr,
+ phyp_dump_info->reserved_scratch_addr);
+ }
+}
+
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ * "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ * "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t store_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long start_addr, length, end_addr;
+ unsigned long start_pfn, nr_pages;
+ ssize_t ret;
+
+ ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+ if (ret != 2)
+ return -EINVAL;
+
+ track_freed_range(start_addr, length);
+
+ /* Range-check - don't free any reserved memory that
+ * wasn't reserved for phyp-dump */
+ if (start_addr < phyp_dump_info->init_reserve_start)
+ start_addr = phyp_dump_info->init_reserve_start;
+
+ end_addr = phyp_dump_info->init_reserve_start +
+ phyp_dump_info->init_reserve_size;
+ if (start_addr+length > end_addr)
+ length = end_addr - start_addr;
+
+ /* Release the region of memory assed in by user */
+ start_pfn = PFN_DOWN(start_addr);
+ nr_pages = PFN_DOWN(length);
+ release_memory_range(start_pfn, nr_pages);
+
+ return count;
+}
+
+static ssize_t show_release_region(struct kobject *kobj,
+ struct kobj_attribute *attr, char *buf)
+{
+ u64 second_addr_range;
+
+ /* total reserved size - start of scratch area */
+ second_addr_range = phyp_dump_info->init_reserve_size -
+ phyp_dump_info->reserved_scratch_size;
+ return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+ " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+ phdr.cpu_data.destination_address,
+ phdr.cpu_data.length_copied,
+ phdr.hpte_data.destination_address,
+ phdr.hpte_data.length_copied,
+ phdr.kernel_data.destination_address,
+ phdr.kernel_data.length_copied,
+ phyp_dump_info->init_reserve_start,
+ second_addr_range);
+}
+
+static struct kobj_attribute rr = __ATTR(release_region, 0600,
+ show_release_region,
+ store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+ struct device_node *rtas;
+ const struct phyp_dump_header *dump_header = NULL;
+ unsigned long dump_area_start;
+ unsigned long dump_area_length;
+ int header_len = 0;
+ int rc;
+
+ /* If no memory was reserved in early boot, there is nothing to do */
+ if (phyp_dump_info->init_reserve_size == 0)
+ return 0;
+
+ /* Return if phyp dump not supported */
+ if (!phyp_dump_info->phyp_dump_configured)
+ return -ENOSYS;
+
+ /* Is there dump data waiting for us? If there isn't,
+ * then register a new dump area, and release all of
+ * the rest of the reserved ram.
+ *
+ * The /rtas/ibm,kernel-dump rtas node is present only
+ * if there is dump data waiting for us.
+ */
+ rtas = of_find_node_by_path("/rtas");
+ if (rtas) {
+ dump_header = of_get_property(rtas, "ibm,kernel-dump",
+ &header_len);
+ of_node_put(rtas);
+ }
+
+ print_dump_header(dump_header);
+ dump_area_length = init_dump_header(&phdr);
+ /* align down */
+ dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
+
+ if (dump_header == NULL) {
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ /* re-register the dump area, if old dump was invalid */
+ if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+ invalidate_last_dump(&phdr, dump_area_start);
+ register_dump_area(&phdr, dump_area_start);
+ return 0;
+ }
+
+ if (dump_header) {
+ phyp_dump_info->reserved_scratch_addr =
+ dump_header->cpu_data.destination_address;
+ phyp_dump_info->reserved_scratch_size =
+ dump_header->cpu_data.source_length +
+ dump_header->hpte_data.source_length +
+ dump_header->kernel_data.source_length;
+ }
+
+ /* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+ rc = sysfs_create_file(kernel_kobj, &rr.attr);
+ if (rc)
+ printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
+ rc);
+
+ /* ToDo: re-register the dump area, for next time. */
+ return 0;
+}
+machine_subsys_initcall(pseries, phyp_dump_setup);
+
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ const unsigned int *sizes;
+
+ phyp_dump_info->phyp_dump_configured = 0;
+ phyp_dump_info->phyp_dump_is_active = 0;
+
+ if (depth != 1 || strcmp(uname, "rtas") != 0)
+ return 0;
+
+ if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+ phyp_dump_info->phyp_dump_configured++;
+
+ if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+ phyp_dump_info->phyp_dump_is_active++;
+
+ sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
+ NULL);
+ if (!sizes)
+ return 0;
+
+ if (sizes[0] == 1)
+ phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+ if (sizes[3] == 2)
+ phyp_dump_info->hpte_region_size =
+ *((unsigned long *)&sizes[4]);
+ return 1;
+}
+
+/* Look for phyp_dump= cmdline option */
+static int __init early_phyp_dump_enabled(char *p)
+{
+ phyp_dump_info->phyp_dump_at_boot = 1;
+
+ if (!p)
+ return 0;
+
+ if (strncmp(p, "1", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 1;
+ else if (strncmp(p, "0", 1) == 0)
+ phyp_dump_info->phyp_dump_at_boot = 0;
+
+ return 0;
+}
+early_param("phyp_dump", early_phyp_dump_enabled);
+
+/* Look for phyp_dump_reserve_size= cmdline option */
+static int __init early_phyp_dump_reserve_size(char *p)
+{
+ if (p)
+ phyp_dump_info->reserve_bootvar = memparse(p, &p);
+
+ return 0;
+}
+early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size);
/* Poweron flag used for enabling auto ups restart */
extern unsigned long rtas_poweron_auto;
+extern void find_udbg_vterm(void);
+
#endif /* _PSERIES_PSERIES_H */
tmp = strchr(buf, ' ');
if (!tmp) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
*tmp = '\0';
if (++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
*length = simple_strtoul(tmp, &tmp, 10);
if (*length == -1) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
if (*tmp != ' ' || ++tmp >= end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
tmp += *length;
if (tmp > end) {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
printk(KERN_ERR "property parse failed in %s at line %d\n",
- __FUNCTION__, __LINE__);
+ __func__, __LINE__);
return NULL;
}
tmp++;
static int __init scanlog_init(void)
{
struct proc_dir_entry *ent;
+ void *data;
+ int err = -ENOMEM;
ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
- if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
- printk(KERN_ERR "scan-log-dump not implemented on this system\n");
- return -EIO;
- }
+ if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
+ return -ENODEV;
- ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL);
- if (ent) {
- ent->proc_fops = &scanlog_fops;
- /* Ideally we could allocate a buffer < 4G */
- ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
- if (!ent->data) {
- printk(KERN_ERR "Failed to allocate a buffer\n");
- remove_proc_entry("scan-log-dump", ent->parent);
- return -ENOMEM;
- }
- ((unsigned int *)ent->data)[0] = 0;
- } else {
- printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
- return -EIO;
- }
+ /* Ideally we could allocate a buffer < 4G */
+ data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+ if (!data)
+ goto err;
+
+ ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+ &scanlog_fops);
+ if (!ent)
+ goto err;
+
+ ent->data = data;
proc_ppc64_scan_log_dump = ent;
return 0;
+err:
+ kfree(data);
+ return err;
}
static void __exit scanlog_cleanup(void)
#define DBG(fmt...)
#endif
-/* move those away to a .h */
-extern void find_udbg_vterm(void);
-
int fwnmi_active; /* TRUE if an FWNMI handler is present */
static void pseries_shared_idle_sleep(void);
{
unsigned int cpu = smp_processor_id();
unsigned long start_snooze;
+ unsigned long in_purr, out_purr;
/*
* Indicate to the HV that we are idle. Now would be
*/
get_lppaca()->idle = 1;
get_lppaca()->donate_dedicated_cpu = 1;
+ in_purr = mfspr(SPRN_PURR);
/*
* We come in with interrupts disabled, and need_resched()
out:
HMT_medium();
+ out_purr = mfspr(SPRN_PURR);
+ get_lppaca()->wait_state_cycles += out_purr - in_purr;
get_lppaca()->donate_dedicated_cpu = 0;
get_lppaca()->idle = 0;
}
}
#endif /* CONFIG_SMP */
-void xics_teardown_cpu()
+void xics_teardown_cpu(void)
{
int cpu = smp_processor_id();
obj-$(CONFIG_PPC_I8259) += i8259.o
obj-$(CONFIG_IPIC) += ipic.o
obj-$(CONFIG_4xx) += uic.o
+obj-$(CONFIG_4xx_SOC) += ppc4xx_soc.o
obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o
obj-$(CONFIG_OF_RTC) += of_rtc.o
ifeq ($(CONFIG_PCI),y)
if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
goto out;
- printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
ret = -EIO;
out:
spin_unlock_irqrestore(&cmd_lock, flags);
case CPM_CLK_SCC1:
reg = &im_cpmux->cmx_scr;
shift = 24;
+ break;
case CPM_CLK_SCC2:
reg = &im_cpmux->cmx_scr;
shift = 16;
#include <linux/dma-mapping.h>
#include <linux/vmalloc.h>
#include <linux/suspend.h>
+#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/machdep.h>
#include <asm/abs_addr.h>
#include <asm/cacheflush.h>
-#include <asm/lmb.h>
#include <asm/ppc-pci.h>
#include "dart.h"
switch(type) {
#ifdef CONFIG_PPC_DCR
case mpic_access_dcr:
- return dcr_write(rb->dhost, reg, value);
+ dcr_write(rb->dhost, reg, value);
+ break;
#endif
case mpic_access_mmio_be:
- return out_be32(rb->base + (reg >> 2), value);
+ out_be32(rb->base + (reg >> 2), value);
+ break;
case mpic_access_mmio_le:
default:
- return out_le32(rb->base + (reg >> 2), value);
+ out_le32(rb->base + (reg >> 2), value);
+ break;
}
}
const char *name)
{
struct mpic *mpic;
- u32 reg;
+ u32 greg_feature;
const char *vers;
int i;
int intvec_top;
/* Look for protected sources */
if (node) {
- unsigned int psize, bits, mapsize;
+ int psize;
+ unsigned int bits, mapsize;
const u32 *psrc =
of_get_property(node, "protected-sources", &psize);
if (psrc) {
* in, try to obtain one
*/
if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
- const u32 *reg;
- reg = of_get_property(node, "reg", NULL);
+ const u32 *reg = of_get_property(node, "reg", NULL);
BUG_ON(reg == NULL);
paddr = of_translate_address(node, reg);
BUG_ON(paddr == OF_BAD_ADDR);
* MPICs, num sources as well. On ISU MPICs, sources are counted
* as ISUs are added
*/
- reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
- mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+ greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+ mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
>> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
if (isu_size == 0)
- mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
- >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+ mpic->num_sources =
+ ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+ >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
/* Map the per-CPU registers */
for (i = 0; i < mpic->num_cpus; i++) {
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
/* Display version */
- switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+ switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
vers = "1.0";
break;
void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
unsigned int mpic_irq_get_priority(unsigned int irq)
{
- int is_ipi;
+ unsigned int is_ipi;
struct mpic *mpic = mpic_find(irq, &is_ipi);
unsigned int src = mpic_irq_to_hw(irq);
unsigned long flags;
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio);
}
-/*
- * XXX: someone who knows mpic should check this.
- * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
- * or can we reset the mpic in the new kernel?
- */
void mpic_teardown_this_cpu(int secondary)
{
struct mpic *mpic = mpic_primary;
/* Set current processor priority to max */
mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
+ /* We need to EOI the IPI since not all platforms reset the MPIC
+ * on boot and new interrupts wouldn't get delivered otherwise.
+ */
+ mpic_eoi(mpic);
spin_unlock_irqrestore(&mpic_lock, flags);
}
if (err)
return err;
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "cell-index", NULL);
if (!prop)
return -ENODEV;
port_number = *(int *)prop;
pdata.cache_mgmt = 1; /* All current revs need this set */
+ pdata.max_idle = 40; /* default */
prop = of_get_property(np, "max_idle", NULL);
if (prop)
pdata.max_idle = *prop;
/*
* Create mv64x60_eth platform devices
*/
-static int __init eth_register_shared_pdev(struct device_node *np)
+static struct platform_device * __init mv64x60_eth_register_shared_pdev(
+ struct device_node *np, int id)
{
struct platform_device *pdev;
struct resource r[1];
int err;
- np = of_get_parent(np);
- if (!np)
- return -ENODEV;
-
err = of_address_to_resource(np, 0, &r[0]);
- of_node_put(np);
if (err)
- return err;
+ return ERR_PTR(err);
- pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
+ pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
r, 1);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- return 0;
+ return pdev;
}
-static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
+static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
+ struct platform_device *shared_pdev)
{
struct resource r[1];
struct mv643xx_eth_platform_data pdata;
const phandle *ph;
int err;
- /* only register the shared platform device the first time through */
- if (id == 0 && (err = eth_register_shared_pdev(np)))
- return err;
-
memset(r, 0, sizeof(r));
of_irq_to_resource(np, 0, &r[0]);
memset(&pdata, 0, sizeof(pdata));
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "reg", NULL);
if (!prop)
return -ENODEV;
pdata.port_number = *prop;
of_node_put(phy);
- pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
+ pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
if (!pdev)
return -ENOMEM;
memset(&pdata, 0, sizeof(pdata));
+ pdata.freq_m = 8; /* default */
prop = of_get_property(np, "freq_m", NULL);
if (!prop)
return -ENODEV;
pdata.freq_m = *prop;
+ pdata.freq_m = 3; /* default */
prop = of_get_property(np, "freq_n", NULL);
if (!prop)
return -ENODEV;
pdata.freq_n = *prop;
- prop = of_get_property(np, "timeout", NULL);
- if (prop)
- pdata.timeout = *prop;
- else
- pdata.timeout = 1000; /* 1 second */
+ pdata.timeout = 1000; /* default: 1 second */
pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
if (!pdev)
memset(&pdata, 0, sizeof(pdata));
- prop = of_get_property(np, "timeout", NULL);
- if (!prop)
- return -ENODEV;
- pdata.timeout = *prop;
+ pdata.timeout = 10; /* Default: 10 seconds */
np = of_get_parent(np);
if (!np)
static int __init mv64x60_device_setup(void)
{
- struct device_node *np = NULL;
- int id;
+ struct device_node *np, *np2;
+ struct platform_device *pdev;
+ int id, id2;
int err;
id = 0;
- for_each_compatible_node(np, "serial", "marvell,mpsc")
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
if ((err = mv64x60_mpsc_device_setup(np, id++)))
goto error;
id = 0;
- for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
- if ((err = mv64x60_eth_device_setup(np, id++)))
+ id2 = 0;
+ for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
+ pdev = mv64x60_eth_register_shared_pdev(np, id++);
+ if (IS_ERR(pdev)) {
+ err = PTR_ERR(pdev);
goto error;
+ }
+ for_each_child_of_node(np, np2) {
+ if (!of_device_is_compatible(np2,
+ "marvell,mv64360-eth"))
+ continue;
+ err = mv64x60_eth_device_setup(np2, id2++, pdev);
+ if (err) {
+ of_node_put(np2);
+ goto error;
+ }
+ }
+ }
id = 0;
- for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+ for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
if ((err = mv64x60_i2c_device_setup(np, id++)))
goto error;
/* support up to one watchdog timer */
- np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+ np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
if (np) {
if ((err = mv64x60_wdt_device_setup(np, id)))
goto error;
if (!np)
goto not_mpsc;
- if (!of_device_is_compatible(np, "marvell,mpsc"))
+ if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
goto not_mpsc;
- prop = of_get_property(np, "block-index", NULL);
+ prop = of_get_property(np, "cell-index", NULL);
if (!prop)
goto not_mpsc;
struct platform_device *pdev;
const unsigned int *prop;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
- pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+ pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
{
struct device_node *np;
- for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+ for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}
const unsigned int *reg;
unsigned long flags;
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
of_node_put(np);
- np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
reg = of_get_property(np, "reg", &size);
paddr = of_translate_address(np, reg);
mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
if (!stdout)
return;
- for_each_compatible_node(np, "serial", "marvell,mpsc") {
+ for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
if (np == stdout)
break;
}
*
* ibm,plb-pciex-440spe
* ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
*
* Anything else will be rejected for now as they are all subtly
* different unfortunately.
int time_out = 20;
/* Set PLL clock receiver to LVPECL */
- mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
/* Shouldn't we do all the calibration stuff etc... here ? */
if (ppc440spe_pciex_check_reset(np))
}
/* De-assert reset of PCIe PLL, wait for lock */
- mtdcri(SDR0, PESDR0_PLLLCT1,
- mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+ dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
udelay(3);
while (time_out) {
mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
0x35000000);
}
- val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (1 << 24) | (1 << 16), 1 << 12);
return 0;
}
.setup_utl = ppc440speB_pciex_init_utl,
};
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+ /* Nothing to do, return 2 ports */
+ return 2;
+}
+
+static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+ u32 val;
+ u32 utlset1;
+
+ if (port->endpoint)
+ val = PTYPE_LEGACY_ENDPOINT << 20;
+ else
+ val = PTYPE_ROOT_PORT << 20;
+
+ if (port->index == 0) {
+ val |= LNKW_X1 << 12;
+ utlset1 = 0x20000000;
+ } else {
+ val |= LNKW_X4 << 12;
+ utlset1 = 0x20101101;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+ mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+ switch (port->index) {
+ case 0:
+ mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+ break;
+
+ case 1:
+ mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+ mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+ mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+ mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+ mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+ (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+ /* Poll for PHY reset */
+ /* XXX FIXME add timeout */
+ switch (port->index) {
+ case 0:
+ while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ case 1:
+ while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+ udelay(10);
+ break;
+ }
+
+ mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+ (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+ ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+ PESDRx_RCSSET_RSTPYN);
+
+ port->has_ibpre = 1;
+
+ return 0;
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+ dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+ /*
+ * Set buffer allocations and then assert VRB and TXE.
+ */
+ out_be32(port->utl_base + PEUTL_PBCTL, 0x0800000c);
+ out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000);
+ out_be32(port->utl_base + PEUTL_INTR, 0x02000000);
+ out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_PBBSZ, 0x00000000);
+ out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000);
+ out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000);
+ out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+ out_be32(port->utl_base + PEUTL_PCTL, 0x80800066);
+
+ return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+ .core_init = ppc460ex_pciex_core_init,
+ .port_init_hw = ppc460ex_pciex_init_port_hw,
+ .setup_utl = ppc460ex_pciex_init_utl,
+};
+
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
* PCIe boards don't show this problem.
* This has to be re-tested and fixed in a later release!
*/
-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
- * configured as done previously by U-Boot. Then Linux will currently
- * not reassign them. So the PHY reset is now done always. This will
- * lead to problems with the Atheros PCIe board again.
- */
val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
if (!(val & 0x00001000))
ppc405ex_pcie_phy_reset(port);
-#else
- ppc405ex_pcie_phy_reset(port);
-#endif
dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */
else
ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
}
+ if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+ ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
#endif /* CONFIG_44x */
#ifdef CONFIG_40x
if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
port->link = 0;
}
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+ dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
msleep(100);
return 0;
#define PESDR1_405EX_LPB 0x044B
#define PESDR1_405EX_PHYSTA 0x044C
+/*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST 0x0308
+#define PESDR0_460EX_L0BISTSTS 0x0309
+#define PESDR0_460EX_L0CDRCTL 0x030A
+#define PESDR0_460EX_L0DRV 0x030B
+#define PESDR0_460EX_L0REC 0x030C
+#define PESDR0_460EX_L0LPB 0x030D
+#define PESDR0_460EX_L0CLK 0x030E
+#define PESDR0_460EX_PHY_CTL_RST 0x030F
+#define PESDR0_460EX_RSTSTA 0x0310
+#define PESDR0_460EX_OBS 0x0311
+#define PESDR0_460EX_L0ERRC 0x0320
+
+#define PESDR1_460EX_L0BIST 0x0348
+#define PESDR1_460EX_L1BIST 0x0349
+#define PESDR1_460EX_L2BIST 0x034A
+#define PESDR1_460EX_L3BIST 0x034B
+#define PESDR1_460EX_L0BISTSTS 0x034C
+#define PESDR1_460EX_L1BISTSTS 0x034D
+#define PESDR1_460EX_L2BISTSTS 0x034E
+#define PESDR1_460EX_L3BISTSTS 0x034F
+#define PESDR1_460EX_L0CDRCTL 0x0350
+#define PESDR1_460EX_L1CDRCTL 0x0351
+#define PESDR1_460EX_L2CDRCTL 0x0352
+#define PESDR1_460EX_L3CDRCTL 0x0353
+#define PESDR1_460EX_L0DRV 0x0354
+#define PESDR1_460EX_L1DRV 0x0355
+#define PESDR1_460EX_L2DRV 0x0356
+#define PESDR1_460EX_L3DRV 0x0357
+#define PESDR1_460EX_L0REC 0x0358
+#define PESDR1_460EX_L1REC 0x0359
+#define PESDR1_460EX_L2REC 0x035A
+#define PESDR1_460EX_L3REC 0x035B
+#define PESDR1_460EX_L0LPB 0x035C
+#define PESDR1_460EX_L1LPB 0x035D
+#define PESDR1_460EX_L2LPB 0x035E
+#define PESDR1_460EX_L3LPB 0x035F
+#define PESDR1_460EX_L0CLK 0x0360
+#define PESDR1_460EX_L1CLK 0x0361
+#define PESDR1_460EX_L2CLK 0x0362
+#define PESDR1_460EX_L3CLK 0x0363
+#define PESDR1_460EX_PHY_CTL_RST 0x0364
+#define PESDR1_460EX_RSTSTA 0x0365
+#define PESDR1_460EX_OBS 0x0366
+#define PESDR1_460EX_L0ERRC 0x0368
+#define PESDR1_460EX_L1ERRC 0x0369
+#define PESDR1_460EX_L2ERRC 0x036A
+#define PESDR1_460EX_L3ERRC 0x036B
+#define PESDR0_460EX_IHS1 0x036C
+#define PESDR0_460EX_IHS2 0x036D
+
/*
* Of the above, some are common offsets from the base
*/
#define PECFG_POM2LAL 0x390
#define PECFG_POM2LAH 0x394
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB 0x10000000
+#define PESDRx_RCSSET_RSTGU 0x01000000
+#define PESDRx_RCSSET_RDY 0x00100000
+#define PESDRx_RCSSET_RSTDL 0x00010000
+#define PESDRx_RCSSET_RSTPYN 0x00001000
enum
{
--- /dev/null
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+ u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+ if (sr & L2C_SR_CPE) {
+ /* Read cache trapped address */
+ u32 addr = l2c_diag(0x42000000);
+ printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+ if (sr & L2C_SR_TPE) {
+ /* Read tag trapped address */
+ u32 addr = l2c_diag(0x82000000) >> 16;
+ printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+ addr);
+ }
+
+ /* Clear parity errors */
+ if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+ } else {
+ printk(KERN_EMERG "L2C: LRU error\n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+ struct device_node *np;
+ u32 r;
+ unsigned long flags;
+ int irq;
+ const u32 *dcrreg;
+ u32 dcrbase_isram;
+ int len;
+ const u32 *prop;
+ u32 l2_size;
+
+ np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+ if (!np)
+ return 0;
+
+ /* Get l2 cache size */
+ prop = of_get_property(np, "cache-size", NULL);
+ if (prop == NULL) {
+ printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ l2_size = prop[0];
+
+ /* Map DCRs */
+ dcrreg = of_get_property(np, "dcr-reg", &len);
+ if (!dcrreg || (len != 4 * sizeof(u32))) {
+ printk(KERN_ERR "%s: Can't get DCR register base !",
+ np->full_name);
+ of_node_put(np);
+ return -ENODEV;
+ }
+ dcrbase_isram = dcrreg[0];
+ dcrbase_l2c = dcrreg[2];
+
+ /* Get and map irq number from device tree */
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR "irq_of_parse_and_map failed\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ /* Install error handler */
+ if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+ printk(KERN_ERR "Cannot install L2C error handler"
+ ", cache is not enabled\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ local_irq_save(flags);
+ asm volatile ("sync" ::: "memory");
+
+ /* Disable SRAM */
+ mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+ mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+ mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+ /* Enable L2_MODE without ICU/DCU */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+ ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+ r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+ /* Hardware Clear Command */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+ while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+ ;
+
+ /* Clear Cache Parity and Tag Errors */
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+ /* Enable 64G snoop region starting at 0 */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+ ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+ r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+ mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+ asm volatile ("sync" ::: "memory");
+
+ /* Enable ICU/DCU ports */
+ r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+ r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+ | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+ r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+ | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+ /* Check for 460EX/GT special handling */
+ if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+ r |= L2C_CFG_RDBW;
+
+ mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+ asm volatile ("sync; isync" ::: "memory");
+ local_irq_restore(flags);
+
+ printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+ of_node_put(np);
+ return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+ while (1)
+ ; /* Just in case the reset doesn't work */
+}
{
unsigned int i;
- printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
+ printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
for (i = 0; i < num_par_io_ports; i++) {
printk(KERN_INFO " cpodr[%u]=%08x\n", i,
in_be32(&par_io[i].cpodr));
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
- __FUNCTION__);
+ __func__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is too small\n", __func__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+ printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
/* Set the PHY base address */
uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
/* Set UCC to fast type */
ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
ucc_fast_free(uccf);
return ret;
}
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
- __FUNCTION__);
+ __func__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_fast_free(uccf);
return -EINVAL;
}
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __func__);
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
printk(KERN_ERR "%s: Cannot allocate private data\n",
- __FUNCTION__);
+ __func__);
return -ENOMEM;
}
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
return -ENOMEM;
}
uccs->us_pram_offset =
qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
if (IS_ERR_VALUE(uccs->us_pram_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
ucc_slow_free(uccs);
return -ENOMEM;
}
/* Set UCC to slow type */
ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
if (ret) {
- printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot set UCC type", __func__);
ucc_slow_free(uccs);
return ret;
}
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
us_info->rx_bd_ring_len);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->tx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
uccs->tx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
printk(KERN_ERR "%s: illegal value for RX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
printk(KERN_ERR "%s: illegal value for TX clock\n",
- __FUNCTION__);
+ __func__);
ucc_slow_free(uccs);
return -EINVAL;
}
return 0;
}
fs_initcall(add_rtc);
+
+MODULE_LICENSE("GPL");
ret = of_address_to_resource(np, 0, &r[0]);
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[0].name, r[0].start, r[0].end);
+ __func__,r[0].name, r[0].start, r[0].end);
if (ret)
goto err;
r[1].end = irq_of_parse_and_map(np, 0);
r[1].flags = IORESOURCE_IRQ;
DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
- __FUNCTION__,r[1].name, r[1].start, r[1].end);
+ __func__,r[1].name, r[1].start, r[1].end);
tsi_eth_dev =
platform_device_register_simple("tsi-ethernet", i++, &r[0],
/* PCI Config mapping */
tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
tsi108_pci_cfg_phys = cfg_phys;
- DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+ DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
tsi108_pci_cfg_base);
/* Fetch host bridge registers address */
static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{ unsigned int irq;
- DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+ DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
if ((virq >= 1) && (virq <= 4)){
irq = virq + IRQ_PCI_INTAD_BASE - 1;
get_irq_desc(irq)->status |= IRQ_LEVEL;
#ifdef CONFIG_PPC64
#include <asm/hvcall.h>
#include <asm/paca.h>
-#include <asm/iseries/it_lp_reg_save.h>
#endif
#include "nonstdio.h"
if (firmware_has_feature(FW_FEATURE_ISERIES)) {
struct paca_struct *ptrPaca;
struct lppaca *ptrLpPaca;
- struct ItLpRegSave *ptrLpRegSave;
/* Dump out relevant Paca data areas. */
printf("Paca: \n");
printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n",
ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
-
- printf(" Local Processor Register Save Area (LpRegSave): \n");
- ptrLpRegSave = ptrPaca->reg_save_ptr;
- printf(" Saved Sprg0=%.16lx Saved Sprg1=%.16lx \n",
- ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
- printf(" Saved Sprg2=%.16lx Saved Sprg3=%.16lx \n",
- ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
- printf(" Saved Msr =%.16lx Saved Nia =%.16lx \n",
- ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
}
#endif
({ \
u32 offset = offsetof(immap_t, member); \
void *addr = ioremap (IMAP_ADDR + offset, \
- sizeof( ((immap_t*)0)->member)); \
+ FIELD_SIZEOF(immap_t, member)); \
addr; \
})
#ifdef CONFIG_USE_MDIO
fec_enet_mii(dev);
#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
}
fecp->fec_ecntrl = ecntrl; /* restore old settings */
}
#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
#endif /* CONFIG_USE_MDIO */
#ifndef CONFIG_RPXCLASSIC
/* we haven't used ctr or xer or lr */
b fast_exception_return
-/*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
- lwz r3,_MSR(r1)
- oris r3,r3,MSR_VEC@h
- stw r3,_MSR(r1) /* enable use of AltiVec after return */
- lis r3,87f@h
- ori r3,r3,87f@l
- mr r4,r2 /* current */
- lwz r5,_NIP(r1)
- bl printk
- b ret_from_except
-87: .string "AltiVec used in kernel (task=%p, pc=%x) \n"
- .align 4,0
-
/*
* giveup_altivec(tsk)
* Disable AltiVec for the task given as the argument,
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
i = max_mapnr;
while (i-- > 0) {
total++;
{
int irq;
- pr_debug("%s\n", __FUNCTION__);
+ pr_debug("%s\n", __func__);
i8259_init(0, 0);
mv64360_init_irq();
};
const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
- pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
+ pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
return PCI_IRQ_TABLE_LOOKUP;
u32 data;
u8 data8;
- pr_debug("%s: enter\n", __FUNCTION__);
+ pr_debug("%s: enter\n", __func__);
/* Wait for debugger? */
if (ppc7d_wait_debugger) {
ppc_md.set_rtc_time = ppc7d_set_rtc_time;
ppc_md.get_rtc_time = ppc7d_get_rtc_time;
- pr_debug("%s: exit\n", __FUNCTION__);
+ pr_debug("%s: exit\n", __func__);
}
/* Called from machine_init(), early, before any of the __init functions
int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
struct mpc52xx_cdm __iomem *cdm;
unsigned long flags;
u16 mclken_div;
config SYS_SUPPORTS_PCI
bool
-config ARCH_MAY_HAVE_PC_FDC
- bool
-
config STACKTRACE_SUPPORT
def_bool y
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
- -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+ -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
-n 'Linux-$(KERNELRELEASE)' -d $< $@
$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
#include <linux/signal.h>
#include <asm/processor.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
#include <asm/cpu/fpu.h>
#include <asm/processor.h>
#include <asm/system.h>
+#include <asm/fpu.h>
/* The PR (precision) bit in the FP Status Register must be clear when
* an frchg instruction is executed, otherwise the instruction is undefined.
#include <asm/processor.h>
#include <asm/user.h>
#include <asm/io.h>
+#include <asm/fpu.h>
/*
* Initially load the FPU with signalling NANS. This bit pattern
#include <linux/elfcore.h>
#include <linux/sched.h>
+#include <asm/fpu.h>
/*
* Capture the user space registers if the task is not running (in user space)
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/ubc.h>
+#include <asm/fpu.h>
static int hlt_counter;
int ubc_usercnt = 0;
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
+#include <asm/fpu.h>
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
const struct user_regset_view *view;
int ret;
- view = task_user_regset_view(child);
+ view = task_user_regset_view(current);
switch(request) {
case PTRACE_GETREGS: {
bool
default y
select HAVE_IDE
+ select HAVE_LMB
help
SPARC is a family of RISC microprocessors designed and marketed by
Sun Microsystems, incorporated. This port covers the newer 64-bit
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Sun Feb 17 22:44:12 2008
+# Linux kernel version: 2.6.25-rc3
+# Wed Mar 26 04:33:35 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
#include <asm/spitfire.h>
#include <asm/oplib.h>
+#include "entry.h"
+
DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
struct cpu_iu_info {
char *sparc_cpu_type;
char *sparc_fpu_type;
-unsigned int fsr_storage;
-
static void __init sun4v_cpu_probe(void)
{
switch (sun4v_chip_type) {
unsigned long ver, fpu_vers, manuf, impl, fprs;
int i;
- if (tlb_type == hypervisor)
- return sun4v_cpu_probe();
+ if (tlb_type == hypervisor) {
+ sun4v_cpu_probe();
+ return;
+ }
fprs = fprs_read();
fprs_write(FPRS_FEF);
LIST_HEAD(todo);
spin_lock_irqsave(&ds_lock, flags);
- list_splice(&ds_work_list, &todo);
- INIT_LIST_HEAD(&ds_work_list);
+ list_splice_init(&ds_work_list, &todo);
spin_unlock_irqrestore(&ds_lock, flags);
list_for_each_entry_safe(qp, tmp, &todo, list) {
2: retl
nop
+ /* Flush %fp and %i7 to the stack for all register
+ * windows active inside of the cpu. This allows
+ * show_stack_trace() to avoid using an expensive
+ * 'flushw'.
+ */
+ .globl stack_trace_flush
+ .type stack_trace_flush,#function
+stack_trace_flush:
+ rdpr %pstate, %o0
+ wrpr %o0, PSTATE_IE, %pstate
+
+ rdpr %cwp, %g1
+ rdpr %canrestore, %g2
+ sub %g1, 1, %g3
+
+1: brz,pn %g2, 2f
+ sub %g2, 1, %g2
+ wrpr %g3, %cwp
+ stx %fp, [%sp + STACK_BIAS + RW_V9_I6]
+ stx %i7, [%sp + STACK_BIAS + RW_V9_I7]
+ ba,pt %xcc, 1b
+ sub %g3, 1, %g3
+
+2: wrpr %g1, %cwp
+ wrpr %o0, %pstate
+
+ retl
+ nop
+ .size stack_trace_flush,.-stack_trace_flush
+
#ifdef CONFIG_SMP
.globl hard_smp_processor_id
hard_smp_processor_id:
--- /dev/null
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+extern char *sparc_cpu_type;
+extern char *sparc_fpu_type;
+
+extern void __init per_cpu_patch(void);
+extern void __init sun4v_patch(void);
+extern void __init boot_cpu_id_too_large(int cpu);
+extern unsigned int dcache_parity_tl1_occurred;
+extern unsigned int icache_parity_tl1_occurred;
+
+extern asmlinkage void update_perfctrs(void);
+extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
+extern void timer_interrupt(int irq, struct pt_regs *regs);
+
+extern void do_notify_resume(struct pt_regs *regs,
+ unsigned long orig_i0,
+ int restart_syscall,
+ unsigned long thread_info_flags);
+
+extern asmlinkage void syscall_trace(struct pt_regs *regs,
+ int syscall_exit_p);
+
+extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
+
+extern void do_fpe_common(struct pt_regs *regs);
+extern void do_fpieee(struct pt_regs *regs);
+extern void do_fpother(struct pt_regs *regs);
+extern void do_tof(struct pt_regs *regs);
+extern void do_div0(struct pt_regs *regs);
+extern void do_illegal_instruction(struct pt_regs *regs);
+extern void mem_address_unaligned(struct pt_regs *regs,
+ unsigned long sfar,
+ unsigned long sfsr);
+extern void sun4v_do_mna(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void do_privop(struct pt_regs *regs);
+extern void do_privact(struct pt_regs *regs);
+extern void do_cee(struct pt_regs *regs);
+extern void do_cee_tl1(struct pt_regs *regs);
+extern void do_dae_tl1(struct pt_regs *regs);
+extern void do_iae_tl1(struct pt_regs *regs);
+extern void do_div0_tl1(struct pt_regs *regs);
+extern void do_fpdis_tl1(struct pt_regs *regs);
+extern void do_fpieee_tl1(struct pt_regs *regs);
+extern void do_fpother_tl1(struct pt_regs *regs);
+extern void do_ill_tl1(struct pt_regs *regs);
+extern void do_irq_tl1(struct pt_regs *regs);
+extern void do_lddfmna_tl1(struct pt_regs *regs);
+extern void do_stdfmna_tl1(struct pt_regs *regs);
+extern void do_paw(struct pt_regs *regs);
+extern void do_paw_tl1(struct pt_regs *regs);
+extern void do_vaw(struct pt_regs *regs);
+extern void do_vaw_tl1(struct pt_regs *regs);
+extern void do_tof_tl1(struct pt_regs *regs);
+extern void do_getpsr(struct pt_regs *regs);
+
+extern void spitfire_insn_access_exception(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_data_access_exception(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_data_access_exception_tl1(struct pt_regs *regs,
+ unsigned long sfsr,
+ unsigned long sfar);
+extern void spitfire_access_error(struct pt_regs *regs,
+ unsigned long status_encoded,
+ unsigned long afar);
+
+extern void cheetah_fecc_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_cee_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_deferred_handler(struct pt_regs *regs,
+ unsigned long afsr,
+ unsigned long afar);
+extern void cheetah_plus_parity_error(int type, struct pt_regs *regs);
+
+extern void sun4v_insn_access_exception(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_data_access_exception(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_data_access_exception_tl1(struct pt_regs *regs,
+ unsigned long addr,
+ unsigned long type_ctx);
+extern void sun4v_resum_error(struct pt_regs *regs,
+ unsigned long offset);
+extern void sun4v_resum_overflow(struct pt_regs *regs);
+extern void sun4v_nonresum_error(struct pt_regs *regs,
+ unsigned long offset);
+extern void sun4v_nonresum_overflow(struct pt_regs *regs);
+
+extern unsigned long sun4v_err_itlb_vaddr;
+extern unsigned long sun4v_err_itlb_ctx;
+extern unsigned long sun4v_err_itlb_pte;
+extern unsigned long sun4v_err_itlb_error;
+
+extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl);
+
+extern unsigned long sun4v_err_dtlb_vaddr;
+extern unsigned long sun4v_err_dtlb_ctx;
+extern unsigned long sun4v_err_dtlb_pte;
+extern unsigned long sun4v_err_dtlb_error;
+
+extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl);
+extern void hypervisor_tlbop_error(unsigned long err,
+ unsigned long op);
+extern void hypervisor_tlbop_error_xcall(unsigned long err,
+ unsigned long op);
+
+/* WARNING: The error trap handlers in assembly know the precise
+ * layout of the following structure.
+ *
+ * C-level handlers in traps.c use this information to log the
+ * error and then determine how to recover (if possible).
+ */
+struct cheetah_err_info {
+/*0x00*/u64 afsr;
+/*0x08*/u64 afar;
+
+ /* D-cache state */
+/*0x10*/u64 dcache_data[4]; /* The actual data */
+/*0x30*/u64 dcache_index; /* D-cache index */
+/*0x38*/u64 dcache_tag; /* D-cache tag/valid */
+/*0x40*/u64 dcache_utag; /* D-cache microtag */
+/*0x48*/u64 dcache_stag; /* D-cache snooptag */
+
+ /* I-cache state */
+/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */
+/*0x90*/u64 icache_index; /* I-cache index */
+/*0x98*/u64 icache_tag; /* I-cache phys tag */
+/*0xa0*/u64 icache_utag; /* I-cache microtag */
+/*0xa8*/u64 icache_stag; /* I-cache snooptag */
+/*0xb0*/u64 icache_upper; /* I-cache upper-tag */
+/*0xb8*/u64 icache_lower; /* I-cache lower-tag */
+
+ /* E-cache state */
+/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */
+/*0xe0*/u64 ecache_index; /* E-cache index */
+/*0xe8*/u64 ecache_tag; /* E-cache tag/state */
+
+/*0xf0*/u64 __pad[32 - 30];
+};
+#define CHAFSR_INVALID ((u64)-1L)
+
+/* This is allocated at boot time based upon the largest hardware
+ * cpu ID in the system. We allocate two entries per cpu, one for
+ * TL==0 logging and one for TL >= 1 logging.
+ */
+extern struct cheetah_err_info *cheetah_error_log;
+
+/* UPA nodes send interrupt packet to UltraSparc with first data reg
+ * value low 5 (7 on Starfire) bits holding the IRQ identifier being
+ * delivered. We must translate this into a non-vector IRQ so we can
+ * set the softint on this cpu.
+ *
+ * To make processing these packets efficient and race free we use
+ * an array of irq buckets below. The interrupt vector handler in
+ * entry.S feeds incoming packets into per-cpu pil-indexed lists.
+ *
+ * If you make changes to ino_bucket, please update hand coded assembler
+ * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
+ */
+struct ino_bucket {
+/*0x00*/unsigned long __irq_chain_pa;
+
+ /* Virtual interrupt number assigned to this INO. */
+/*0x08*/unsigned int __virt_irq;
+/*0x0c*/unsigned int __pad;
+};
+
+extern struct ino_bucket *ivector_table;
+extern unsigned long ivector_table_pa;
+
+extern void handler_irq(int irq, struct pt_regs *regs);
+extern void init_irqwork_curcpu(void);
+extern void __cpuinit sun4v_register_mondo_queues(int this_cpu);
+
+#endif /* _ENTRY_H */
/* Leave arg2 as-is, prom_mmu_ihandle_cache */
mov -1, %l3
stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: mode (-1 default)
- sethi %hi(8 * 1024 * 1024), %l3
- stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: size (8MB)
+ /* 4MB align the kernel image size. */
+ set (_end - KERNBASE), %l3
+ set ((4 * 1024 * 1024) - 1), %l4
+ add %l3, %l4, %l3
+ andn %l3, %l4, %l3
+ stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: roundup(ksize, 4MB)
sethi %hi(KERNBASE), %l3
stx %l3, [%sp + 2047 + 128 + 0x38] ! arg5: vaddr (KERNBASE)
stx %g0, [%sp + 2047 + 128 + 0x40] ! arg6: empty
unsigned long flags, handle, prot, ctx;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct strbuf *strbuf;
struct iommu *iommu;
+ unsigned long base_shift;
BUG_ON(direction == DMA_NONE);
outs->dma_length = 0;
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
iopte_t *base;
slen = s->length;
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
iommu_map_failed:
for_each_sg(sglist, s, nelems, i) {
if (s->dma_length != 0) {
- unsigned long vaddr, npages, entry, i;
+ unsigned long vaddr, npages, entry, j;
iopte_t *base;
vaddr = s->dma_address & IO_PAGE_MASK;
>> IO_PAGE_SHIFT;
base = iommu->page_table + entry;
- for (i = 0; i < npages; i++)
- iopte_make_dummy(iommu, base + i);
+ for (j = 0; j < npages; j++)
+ iopte_make_dummy(iommu, base + j);
s->dma_address = DMA_ERROR_CODE;
s->dma_length = 0;
spin_unlock_irqrestore(&iommu->lock, flags);
}
-const struct dma_ops sun4u_dma_ops = {
+static const struct dma_ops sun4u_dma_ops = {
.alloc_coherent = dma_4u_alloc_coherent,
.free_coherent = dma_4u_free_coherent,
.map_single = dma_4u_map_single,
#include <linux/mm.h>
#include <linux/scatterlist.h>
#include <linux/device.h>
+#include <linux/iommu-helper.h>
#include <asm/iommu.h>
#include <asm/scatterlist.h>
return npages;
}
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+ unsigned long shift,
+ unsigned long boundary_size,
+ struct scatterlist *outs,
+ struct scatterlist *sg)
{
- unsigned long i, npages = 0;
- struct scatterlist *sg;
+ unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+ int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
- for_each_sg(sglist, sg, nelems, i) {
- unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
- npages += iommu_num_pages(paddr, sg->length);
- }
-
- return npages;
+ return iommu_is_span_boundary(entry, nr, shift, boundary_size);
}
extern unsigned long iommu_range_alloc(struct device *dev,
#include <asm/hypervisor.h>
#include <asm/cacheflush.h>
-/* UPA nodes send interrupt packet to UltraSparc with first data reg
- * value low 5 (7 on Starfire) bits holding the IRQ identifier being
- * delivered. We must translate this into a non-vector IRQ so we can
- * set the softint on this cpu.
- *
- * To make processing these packets efficient and race free we use
- * an array of irq buckets below. The interrupt vector handler in
- * entry.S feeds incoming packets into per-cpu pil-indexed lists.
- *
- * If you make changes to ino_bucket, please update hand coded assembler
- * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
- */
-struct ino_bucket {
-/*0x00*/unsigned long __irq_chain_pa;
-
- /* Virtual interrupt number assigned to this INO. */
-/*0x08*/unsigned int __virt_irq;
-/*0x0c*/unsigned int __pad;
-};
+#include "entry.h"
#define NUM_IVECS (IMAP_INR + 1)
+
struct ino_bucket *ivector_table;
unsigned long ivector_table_pa;
unsigned long flags, handle, prot;
dma_addr_t dma_next = 0, dma_addr;
unsigned int max_seg_size;
+ unsigned long seg_boundary_size;
int outcount, incount, i;
struct iommu *iommu;
+ unsigned long base_shift;
long err;
BUG_ON(direction == DMA_NONE);
iommu_batch_start(dev, prot, ~0UL);
max_seg_size = dma_get_max_seg_size(dev);
+ seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+ IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+ base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
for_each_sg(sglist, s, nelems, i) {
- unsigned long paddr, npages, entry, slen;
+ unsigned long paddr, npages, entry, out_entry = 0, slen;
slen = s->length;
/* Sanity check */
* - allocated dma_addr isn't contiguous to previous allocation
*/
if ((dma_addr != dma_next) ||
- (outs->dma_length + s->length > max_seg_size)) {
+ (outs->dma_length + s->length > max_seg_size) ||
+ (is_span_boundary(out_entry, base_shift,
+ seg_boundary_size, outs, s))) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
/* This is a new segment, fill entries */
outs->dma_address = dma_addr;
outs->dma_length = slen;
+ out_entry = entry;
}
/* Calculate next page pointer for contiguous check */
current_thread_info()->xfsr[0] = 0;
current_thread_info()->fpsaved[0] = 0;
regs->tstate &= ~TSTATE_PEF;
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
}
out:
return error;
#include <asm/spitfire.h>
#include <asm/page.h>
#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+#include "entry.h"
/* #define ALLOW_INIT_TRACING */
if (tlb_type == hypervisor)
return;
+ preempt_disable();
+
#ifdef DCACHE_ALIASING_POSSIBLE
/* If bit 13 of the kernel address we used to access the
* user page is the same as the virtual address that page
for (; start < end; start += icache_line_size)
flushi(start);
}
+
+ preempt_enable();
+}
+
+static int get_from_target(struct task_struct *target, unsigned long uaddr,
+ void *kbuf, int len)
+{
+ if (target == current) {
+ if (copy_from_user(kbuf, (void __user *) uaddr, len))
+ return -EFAULT;
+ } else {
+ int len2 = access_process_vm(target, uaddr, kbuf, len, 0);
+ if (len2 != len)
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int set_to_target(struct task_struct *target, unsigned long uaddr,
+ void *kbuf, int len)
+{
+ if (target == current) {
+ if (copy_to_user((void __user *) uaddr, kbuf, len))
+ return -EFAULT;
+ } else {
+ int len2 = access_process_vm(target, uaddr, kbuf, len, 1);
+ if (len2 != len)
+ return -EFAULT;
+ }
+ return 0;
+}
+
+static int regwindow64_get(struct task_struct *target,
+ const struct pt_regs *regs,
+ struct reg_window *wbuf)
+{
+ unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+ if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ struct reg_window32 win32;
+ int i;
+
+ if (get_from_target(target, rw_addr, &win32, sizeof(win32)))
+ return -EFAULT;
+ for (i = 0; i < 8; i++)
+ wbuf->locals[i] = win32.locals[i];
+ for (i = 0; i < 8; i++)
+ wbuf->ins[i] = win32.ins[i];
+ } else {
+ rw_addr += STACK_BIAS;
+ if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int regwindow64_set(struct task_struct *target,
+ const struct pt_regs *regs,
+ struct reg_window *wbuf)
+{
+ unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+ if (test_tsk_thread_flag(current, TIF_32BIT)) {
+ struct reg_window32 win32;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ win32.locals[i] = wbuf->locals[i];
+ for (i = 0; i < 8; i++)
+ win32.ins[i] = wbuf->ins[i];
+
+ if (set_to_target(target, rw_addr, &win32, sizeof(win32)))
+ return -EFAULT;
+ } else {
+ rw_addr += STACK_BIAS;
+ if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+ return -EFAULT;
+ }
+
+ return 0;
}
enum sparc_regset {
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
regs->u_regs,
0, 16 * sizeof(u64));
- if (!ret) {
- unsigned long __user *reg_window = (unsigned long __user *)
- (regs->u_regs[UREG_I6] + STACK_BIAS);
- unsigned long window[16];
+ if (!ret && count && pos < (32 * sizeof(u64))) {
+ struct reg_window window;
- if (copy_from_user(window, reg_window, sizeof(window)))
+ if (regwindow64_get(target, regs, &window))
return -EFAULT;
-
ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
- window,
+ &window,
16 * sizeof(u64),
32 * sizeof(u64));
}
36 * sizeof(u64));
}
- if (!ret)
+ if (!ret) {
ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
36 * sizeof(u64), -1);
+ }
return ret;
}
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
regs->u_regs,
0, 16 * sizeof(u64));
- if (!ret && count > 0) {
- unsigned long __user *reg_window = (unsigned long __user *)
- (regs->u_regs[UREG_I6] + STACK_BIAS);
- unsigned long window[16];
+ if (!ret && count && pos < (32 * sizeof(u64))) {
+ struct reg_window window;
- if (copy_from_user(window, reg_window, sizeof(window)))
+ if (regwindow64_get(target, regs, &window))
return -EFAULT;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
- window,
+ &window,
16 * sizeof(u64),
32 * sizeof(u64));
+
if (!ret &&
- copy_to_user(reg_window, window, sizeof(window)))
+ regwindow64_set(target, regs, &window))
return -EFAULT;
}
.regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets)
};
+#ifdef CONFIG_COMPAT
static int genregs32_get(struct task_struct *target,
const struct user_regset *regset,
unsigned int pos, unsigned int count,
*k++ = regs->u_regs[pos++];
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(*k++, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(*k++, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ k, sizeof(*k), 0)
+ != sizeof(*k))
+ return -EFAULT;
+ k++;
+ pos++;
+ }
}
} else {
for (; count > 0 && pos < 16; count--) {
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(reg, ®_window[pos++]) ||
- put_user(reg, u++))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(reg, ®_window[pos++]) ||
+ put_user(reg, u++))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ ®, sizeof(reg), 0)
+ != sizeof(reg))
+ return -EFAULT;
+ if (access_process_vm(target,
+ (unsigned long) u,
+ ®, sizeof(reg), 1)
+ != sizeof(reg))
+ return -EFAULT;
+ pos++;
+ u++;
+ }
}
}
while (count > 0) {
regs->u_regs[pos++] = *k++;
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (put_user(*k++, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (put_user(*k++, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ (void *) k,
+ sizeof(*k), 1)
+ != sizeof(*k))
+ return -EFAULT;
+ k++;
+ pos++;
+ }
}
} else {
for (; count > 0 && pos < 16; count--) {
}
reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
- for (; count > 0 && pos < 32; count--) {
- if (get_user(reg, u++) ||
- put_user(reg, ®_window[pos++]))
- return -EFAULT;
+ if (target == current) {
+ for (; count > 0 && pos < 32; count--) {
+ if (get_user(reg, u++) ||
+ put_user(reg, ®_window[pos++]))
+ return -EFAULT;
+ }
+ } else {
+ for (; count > 0 && pos < 32; count--) {
+ if (access_process_vm(target,
+ (unsigned long)
+ u,
+ ®, sizeof(reg), 0)
+ != sizeof(reg))
+ return -EFAULT;
+ if (access_process_vm(target,
+ (unsigned long)
+ ®_window[pos],
+ ®, sizeof(reg), 1)
+ != sizeof(reg))
+ return -EFAULT;
+ pos++;
+ u++;
+ }
}
}
while (count > 0) {
.name = "sparc", .e_machine = EM_SPARC,
.regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets)
};
+#endif /* CONFIG_COMPAT */
const struct user_regset_view *task_user_regset_view(struct task_struct *task)
{
+#ifdef CONFIG_COMPAT
if (test_tsk_thread_flag(task, TIF_32BIT))
return &user_sparc32_view;
+#endif
return &user_sparc64_view;
}
+#ifdef CONFIG_COMPAT
struct compat_fps {
unsigned int regs[32];
unsigned int fsr;
long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
compat_ulong_t caddr, compat_ulong_t cdata)
{
- const struct user_regset_view *view = task_user_regset_view(child);
+ const struct user_regset_view *view = task_user_regset_view(current);
compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4];
struct pt_regs32 __user *pregs;
struct compat_fps __user *fps;
return ret;
}
+#endif /* CONFIG_COMPAT */
struct fps {
unsigned int regs[64];
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
- const struct user_regset_view *view = task_user_regset_view(child);
- struct pt_regs __user *pregs = (struct pt_regs __user *) addr;
+ const struct user_regset_view *view = task_user_regset_view(current);
unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
- struct fps __user *fps = (struct fps __user *) addr;
+ struct pt_regs __user *pregs;
+ struct fps __user *fps;
int ret;
+ pregs = (struct pt_regs __user *) (unsigned long) addr;
+ fps = (struct fps __user *) (unsigned long) addr;
+
switch (request) {
case PTRACE_PEEKUSR:
ret = (addr != 0) ? -EIO : 0;
#include <net/ipconfig.h>
#endif
+#include "entry.h"
+
/* Used to synchronize accesses to NatSemi SUPER I/O chip configure
* operations in asm/ns87303.h
*/
/* BUFFER is PAGE_SIZE bytes long. */
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
-
extern void smp_info(struct seq_file *);
extern void smp_bogo(struct seq_file *);
extern void mmu_info(struct seq_file *);
#include <asm/siginfo.h>
#include <asm/visasm.h>
+#include "entry.h"
+#include "systbls.h"
+
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/* {set, get}context() needed for 64-bit SparcLinux userland. */
static inline int
save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
{
- unsigned long *fpregs = (unsigned long *)(regs+1);
+ unsigned long *fpregs = current_thread_info()->fpregs;
unsigned long fprs;
int err = 0;
/* smp.c: Sparc64 SMP support.
*
- * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
*/
#include <linux/module.h>
#include <asm/cpudata.h>
#include <asm/hvtramp.h>
#include <asm/io.h>
+#include <asm/timer.h>
#include <asm/irq.h>
#include <asm/irq_regs.h>
{
extern unsigned long sparc64_ttable_tl0;
extern unsigned long kern_locked_tte_data;
- extern int bigkernel;
struct hvtramp_descr *hdesc;
unsigned long trampoline_ra;
struct trap_per_cpu *tb;
u64 tte_vaddr, tte_data;
unsigned long hv_err;
+ int i;
- hdesc = kzalloc(sizeof(*hdesc), GFP_KERNEL);
+ hdesc = kzalloc(sizeof(*hdesc) +
+ (sizeof(struct hvtramp_mapping) *
+ num_kernel_image_mappings - 1),
+ GFP_KERNEL);
if (!hdesc) {
printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate "
"hvtramp_descr.\n");
}
hdesc->cpu = cpu;
- hdesc->num_mappings = (bigkernel ? 2 : 1);
+ hdesc->num_mappings = num_kernel_image_mappings;
tb = &trap_block[cpu];
tb->hdesc = hdesc;
tte_vaddr = (unsigned long) KERNBASE;
tte_data = kern_locked_tte_data;
- hdesc->maps[0].vaddr = tte_vaddr;
- hdesc->maps[0].tte = tte_data;
- if (bigkernel) {
+ for (i = 0; i < hdesc->num_mappings; i++) {
+ hdesc->maps[i].vaddr = tte_vaddr;
+ hdesc->maps[i].tte = tte_data;
tte_vaddr += 0x400000;
tte_data += 0x400000;
- hdesc->maps[1].vaddr = tte_vaddr;
- hdesc->maps[1].tte = tte_data;
}
trampoline_ra = kimage_addr_to_ra(hv_cpu_startup);
#include <linux/stacktrace.h>
#include <linux/thread_info.h>
#include <asm/ptrace.h>
+#include <asm/stacktrace.h>
void save_stack_trace(struct stack_trace *trace)
{
unsigned long ksp, fp, thread_base;
struct thread_info *tp = task_thread_info(current);
- flushw_all();
+ stack_trace_flush();
+
__asm__ __volatile__(
"mov %%fp, %0"
: "=r" (ksp)
-/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $
- * linux/arch/sparc64/kernel/sys_sparc.c
+/* linux/arch/sparc64/kernel/sys_sparc.c
*
* This file contains various random system calls that
* have a non-standard calling sequence on the Linux/sparc
#include <asm/perfctr.h>
#include <asm/unistd.h>
+#include "entry.h"
+#include "systbls.h"
+
/* #define DEBUG_UNIMP_SYSCALL */
asmlinkage unsigned long sys_getpagesize(void)
goto out;
case SEMTIMEDOP:
err = sys_semtimedop(first, ptr, (unsigned)second,
- (const struct timespec __user *) fifth);
+ (const struct timespec __user *)
+ (unsigned long) fifth);
goto out;
case SEMGET:
err = sys_semget(first, (int)second, (int)third);
} else {
if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p &&
current_thread_info()->utraps[0] > 1) {
- long *p = current_thread_info()->utraps;
+ unsigned long *p = current_thread_info()->utraps;
current_thread_info()->utraps =
kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long),
return 0;
}
-long sparc_memory_ordering(unsigned long model, struct pt_regs *regs)
+asmlinkage long sparc_memory_ordering(unsigned long model,
+ struct pt_regs *regs)
{
if (model >= 3)
return -EINVAL;
current_thread_info()->xfsr[0] = 0;
current_thread_info()->fpsaved[0] = 0;
regs->tstate &= ~TSTATE_PEF;
- task_lock(current);
- current->ptrace &= ~PT_DTRACE;
- task_unlock(current);
}
out:
return error;
--- /dev/null
+#ifndef _SYSTBLS_H
+#define _SYSTBLS_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/utsname.h>
+#include <asm/utrap.h>
+#include <asm/signal.h>
+
+extern asmlinkage unsigned long sys_getpagesize(void);
+extern asmlinkage unsigned long sparc_brk(unsigned long brk);
+extern asmlinkage long sparc_pipe(struct pt_regs *regs);
+extern asmlinkage long sys_ipc(unsigned int call, int first,
+ unsigned long second,
+ unsigned long third,
+ void __user *ptr, long fifth);
+extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
+extern asmlinkage long sparc64_personality(unsigned long personality);
+extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long off);
+extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
+extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
+ unsigned long old_len,
+ unsigned long new_len,
+ unsigned long flags,
+ unsigned long new_addr);
+extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_getdomainname(char __user *name, int len);
+extern asmlinkage long solaris_syscall(struct pt_regs *regs);
+extern asmlinkage long sunos_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_utrap_install(utrap_entry_t type,
+ utrap_handler_t new_p,
+ utrap_handler_t new_d,
+ utrap_handler_t __user *old_p,
+ utrap_handler_t __user *old_d);
+extern asmlinkage long sparc_memory_ordering(unsigned long model,
+ struct pt_regs *regs);
+extern asmlinkage long sys_rt_sigaction(int sig,
+ const struct sigaction __user *act,
+ struct sigaction __user *oact,
+ void __user *restorer,
+ size_t sigsetsize);
+extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
+ unsigned long arg1, unsigned long arg2);
+
+extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
+extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
+extern asmlinkage long sys_sigpause(unsigned int set);
+extern asmlinkage long sys_sigsuspend(old_sigset_t set);
+extern void do_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* _SYSTBLS_H */
-/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $
- * time.c: UltraSparc timer and TOD clock support.
+/* time.c: UltraSparc timer and TOD clock support.
*
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
*
* Based largely on code which is:
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
+#include "entry.h"
+
DEFINE_SPINLOCK(mostek_lock);
DEFINE_SPINLOCK(rtc_lock);
void __iomem *mstk48t02_regs = NULL;
return (data1 == data2); /* Was the write blocked? */
}
+static void __init mostek_set_system_time(void __iomem *mregs)
+{
+ unsigned int year, mon, day, hour, min, sec;
+ u8 tmp;
+
+ spin_lock_irq(&mostek_lock);
+
+ /* Traditional Mostek chip. */
+ tmp = mostek_read(mregs + MOSTEK_CREG);
+ tmp |= MSTK_CREG_READ;
+ mostek_write(mregs + MOSTEK_CREG, tmp);
+
+ sec = MSTK_REG_SEC(mregs);
+ min = MSTK_REG_MIN(mregs);
+ hour = MSTK_REG_HOUR(mregs);
+ day = MSTK_REG_DOM(mregs);
+ mon = MSTK_REG_MONTH(mregs);
+ year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+
+ xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+ xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ tmp = mostek_read(mregs + MOSTEK_CREG);
+ tmp &= ~MSTK_CREG_READ;
+ mostek_write(mregs + MOSTEK_CREG, tmp);
+
+ spin_unlock_irq(&mostek_lock);
+}
+
/* Probe for the real time clock chip. */
static void __init set_system_time(void)
{
unsigned long dregs = 0UL;
void __iomem *bregs = 0UL;
#endif
- u8 tmp;
if (!mregs && !dregs && !bregs) {
prom_printf("Something wrong, clock regs not mapped yet.\n");
}
if (mregs) {
- spin_lock_irq(&mostek_lock);
-
- /* Traditional Mostek chip. */
- tmp = mostek_read(mregs + MOSTEK_CREG);
- tmp |= MSTK_CREG_READ;
- mostek_write(mregs + MOSTEK_CREG, tmp);
+ mostek_set_system_time(mregs);
+ return;
+ }
- sec = MSTK_REG_SEC(mregs);
- min = MSTK_REG_MIN(mregs);
- hour = MSTK_REG_HOUR(mregs);
- day = MSTK_REG_DOM(mregs);
- mon = MSTK_REG_MONTH(mregs);
- year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
- } else if (bregs) {
+ if (bregs) {
unsigned char val = readb(bregs + 0x0e);
unsigned int century;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
-
- if (mregs) {
- tmp = mostek_read(mregs + MOSTEK_CREG);
- tmp &= ~MSTK_CREG_READ;
- mostek_write(mregs + MOSTEK_CREG, tmp);
-
- spin_unlock_irq(&mostek_lock);
- }
}
/* davem suggests we keep this within the 4M locked kernel image */
setup_clockevent_multiplier(clock);
sparc64_clockevent.max_delta_ns =
- clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+ clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
sparc64_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &sparc64_clockevent);
wr %g2, 0, %tick_cmpr
/* Call OBP by hand to lock KERNBASE into i/d tlbs.
- * We lock 2 consequetive entries if we are 'bigkernel'.
+ * We lock 'num_kernel_image_mappings' consequetive entries.
*/
sethi %hi(prom_entry_lock), %g2
1: ldstub [%g2 + %lo(prom_entry_lock)], %g1
add %l2, -(192 + 128), %sp
flushw
+ /* Setup the loop variables:
+ * %l3: VADDR base
+ * %l4: TTE base
+ * %l5: Loop iterator, iterates from 0 to 'num_kernel_image_mappings'
+ * %l6: Number of TTE entries to map
+ * %l7: Highest TTE entry number, we count down
+ */
+ sethi %hi(KERNBASE), %l3
+ sethi %hi(kern_locked_tte_data), %l4
+ ldx [%l4 + %lo(kern_locked_tte_data)], %l4
+ clr %l5
+ sethi %hi(num_kernel_image_mappings), %l6
+ lduw [%l6 + %lo(num_kernel_image_mappings)], %l6
+ add %l6, 1, %l6
+
+ mov 15, %l7
+ BRANCH_IF_ANY_CHEETAH(g1,g5,2f)
+
+ mov 63, %l7
+2:
+
+3:
+ /* Lock into I-MMU */
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 15, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
- mov 63, %g2
-1:
- stx %g2, [%sp + 2047 + 128 + 0x38]
- sethi %hi(p1275buf), %g2
- or %g2, %lo(p1275buf), %g2
- ldx [%g2 + 0x08], %o1
- call %o1
- add %sp, (2047 + 128), %o0
+ /* Each TTE maps 4MB, convert index to offset. */
+ sllx %l5, 22, %g1
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, do_dtlb
- nop
+ add %l3, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x28] ! VADDR
+ add %l4, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x30] ! TTE
- sethi %hi(call_method), %g2
- or %g2, %lo(call_method), %g2
- stx %g2, [%sp + 2047 + 128 + 0x00]
- mov 5, %g2
- stx %g2, [%sp + 2047 + 128 + 0x08]
- mov 1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x10]
- sethi %hi(itlb_load), %g2
- or %g2, %lo(itlb_load), %g2
- stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(prom_mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE + 0x400000), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- sethi %hi(0x400000), %g1
- add %g2, %g1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 14, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
- mov 62, %g2
-1:
+ /* TTE index is highest minus loop index. */
+ sub %l7, %l5, %g2
stx %g2, [%sp + 2047 + 128 + 0x38]
+
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
-do_dtlb:
+ /* Lock into D-MMU */
sethi %hi(call_method), %g2
or %g2, %lo(call_method), %g2
stx %g2, [%sp + 2047 + 128 + 0x00]
sethi %hi(prom_mmu_ihandle_cache), %g2
lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
- mov 15, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
+ /* Each TTE maps 4MB, convert index to offset. */
+ sllx %l5, 22, %g1
- mov 63, %g2
-1:
+ add %l3, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x28] ! VADDR
+ add %l4, %g1, %g2
+ stx %g2, [%sp + 2047 + 128 + 0x30] ! TTE
+ /* TTE index is highest minus loop index. */
+ sub %l7, %l5, %g2
stx %g2, [%sp + 2047 + 128 + 0x38]
+
sethi %hi(p1275buf), %g2
or %g2, %lo(p1275buf), %g2
ldx [%g2 + 0x08], %o1
call %o1
add %sp, (2047 + 128), %o0
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, do_unlock
+ add %l5, 1, %l5
+ cmp %l5, %l6
+ bne,pt %xcc, 3b
nop
- sethi %hi(call_method), %g2
- or %g2, %lo(call_method), %g2
- stx %g2, [%sp + 2047 + 128 + 0x00]
- mov 5, %g2
- stx %g2, [%sp + 2047 + 128 + 0x08]
- mov 1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x10]
- sethi %hi(dtlb_load), %g2
- or %g2, %lo(dtlb_load), %g2
- stx %g2, [%sp + 2047 + 128 + 0x18]
- sethi %hi(prom_mmu_ihandle_cache), %g2
- lduw [%g2 + %lo(prom_mmu_ihandle_cache)], %g2
- stx %g2, [%sp + 2047 + 128 + 0x20]
- sethi %hi(KERNBASE + 0x400000), %g2
- stx %g2, [%sp + 2047 + 128 + 0x28]
- sethi %hi(kern_locked_tte_data), %g2
- ldx [%g2 + %lo(kern_locked_tte_data)], %g2
- sethi %hi(0x400000), %g1
- add %g2, %g1, %g2
- stx %g2, [%sp + 2047 + 128 + 0x30]
-
- mov 14, %g2
- BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
- mov 62, %g2
-1:
-
- stx %g2, [%sp + 2047 + 128 + 0x38]
- sethi %hi(p1275buf), %g2
- or %g2, %lo(p1275buf), %g2
- ldx [%g2 + 0x08], %o1
- call %o1
- add %sp, (2047 + 128), %o0
-
-do_unlock:
sethi %hi(prom_entry_lock), %g2
stb %g0, [%g2 + %lo(prom_entry_lock)]
membar #StoreStore | #StoreLoad
nop
niagara_lock_tlb:
+ sethi %hi(KERNBASE), %l3
+ sethi %hi(kern_locked_tte_data), %l4
+ ldx [%l4 + %lo(kern_locked_tte_data)], %l4
+ clr %l5
+ sethi %hi(num_kernel_image_mappings), %l6
+ lduw [%l6 + %lo(num_kernel_image_mappings)], %l6
+ add %l6, 1, %l6
+
+1:
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE), %o0
+ sllx %l5, 22, %g2
+ add %l3, %g2, %o0
clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
+ add %l4, %g2, %o2
mov HV_MMU_IMMU, %o3
ta HV_FAST_TRAP
mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE), %o0
+ sllx %l5, 22, %g2
+ add %l3, %g2, %o0
clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
+ add %l4, %g2, %o2
mov HV_MMU_DMMU, %o3
ta HV_FAST_TRAP
- sethi %hi(bigkernel), %g2
- lduw [%g2 + %lo(bigkernel)], %g2
- brz,pt %g2, after_lock_tlb
+ add %l5, 1, %l5
+ cmp %l5, %l6
+ bne,pt %xcc, 1b
nop
- mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE + 0x400000), %o0
- clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
- sethi %hi(0x400000), %o3
- add %o2, %o3, %o2
- mov HV_MMU_IMMU, %o3
- ta HV_FAST_TRAP
-
- mov HV_FAST_MMU_MAP_PERM_ADDR, %o5
- sethi %hi(KERNBASE + 0x400000), %o0
- clr %o1
- sethi %hi(kern_locked_tte_data), %o2
- ldx [%o2 + %lo(kern_locked_tte_data)], %o2
- sethi %hi(0x400000), %o3
- add %o2, %o3, %o2
- mov HV_MMU_DMMU, %o3
- ta HV_FAST_TRAP
-
after_lock_tlb:
wrpr %g0, (PSTATE_PRIV | PSTATE_PEF), %pstate
wr %g0, 0, %fprs
#endif
#include <asm/prom.h>
+#include "entry.h"
/* When an irrecoverable trap occurs at tl > 0, the trap entry
* code logs the trap state registers at every level in the trap
}
}
-void do_call_debug(struct pt_regs *regs)
-{
- notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT);
-}
-
void bad_trap(struct pt_regs *regs, long lvl)
{
char buffer[32];
static unsigned long ecache_flush_linesize;
static unsigned long ecache_flush_size;
-/* WARNING: The error trap handlers in assembly know the precise
- * layout of the following structure.
- *
- * C-level handlers below use this information to log the error
- * and then determine how to recover (if possible).
- */
-struct cheetah_err_info {
-/*0x00*/u64 afsr;
-/*0x08*/u64 afar;
-
- /* D-cache state */
-/*0x10*/u64 dcache_data[4]; /* The actual data */
-/*0x30*/u64 dcache_index; /* D-cache index */
-/*0x38*/u64 dcache_tag; /* D-cache tag/valid */
-/*0x40*/u64 dcache_utag; /* D-cache microtag */
-/*0x48*/u64 dcache_stag; /* D-cache snooptag */
-
- /* I-cache state */
-/*0x50*/u64 icache_data[8]; /* The actual insns + predecode */
-/*0x90*/u64 icache_index; /* I-cache index */
-/*0x98*/u64 icache_tag; /* I-cache phys tag */
-/*0xa0*/u64 icache_utag; /* I-cache microtag */
-/*0xa8*/u64 icache_stag; /* I-cache snooptag */
-/*0xb0*/u64 icache_upper; /* I-cache upper-tag */
-/*0xb8*/u64 icache_lower; /* I-cache lower-tag */
-
- /* E-cache state */
-/*0xc0*/u64 ecache_data[4]; /* 32 bytes from staging registers */
-/*0xe0*/u64 ecache_index; /* E-cache index */
-/*0xe8*/u64 ecache_tag; /* E-cache tag/state */
-
-/*0xf0*/u64 __pad[32 - 30];
-};
-#define CHAFSR_INVALID ((u64)-1L)
-
/* This table is ordered in priority of errors and matches the
* AFAR overwrite policy as well.
*/
static struct afsr_error_table *cheetah_error_table;
static unsigned long cheetah_afsr_errors;
-/* This is allocated at boot time based upon the largest hardware
- * cpu ID in the system. We allocate two entries per cpu, one for
- * TL==0 logging and one for TL >= 1 logging.
- */
struct cheetah_err_info *cheetah_error_log;
static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
force_sig_info(SIGFPE, &info, current);
}
-void instruction_dump (unsigned int *pc)
+static void instruction_dump(unsigned int *pc)
{
int i;
printk("\n");
}
-static void user_instruction_dump (unsigned int __user *pc)
+static void user_instruction_dump(unsigned int __user *pc)
{
int i;
unsigned int buf[9];
#include <asm/prom.h>
#include <asm/sstate.h>
#include <asm/mdesc.h>
+#include <asm/cpudata.h>
#define MAX_PHYS_ADDRESS (1UL << 42UL)
#define KPTE_BITMAP_CHUNK_SZ (256UL * 1024UL * 1024UL)
unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
unsigned long sparc64_kern_sec_context __read_mostly;
-int bigkernel = 0;
+int num_kernel_image_mappings;
#ifdef CONFIG_DEBUG_DCFLUSH
atomic_t dcpage_flushes = ATOMIC_INIT(0);
static void __init remap_kernel(void)
{
unsigned long phys_page, tte_vaddr, tte_data;
- int tlb_ent = sparc64_highest_locked_tlbent();
+ int i, tlb_ent = sparc64_highest_locked_tlbent();
tte_vaddr = (unsigned long) KERNBASE;
phys_page = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
/* Now lock us into the TLBs via Hypervisor or OBP. */
if (tlb_type == hypervisor) {
- hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
- hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
- if (bigkernel) {
- tte_vaddr += 0x400000;
- tte_data += 0x400000;
+ for (i = 0; i < num_kernel_image_mappings; i++) {
hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
+ tte_vaddr += 0x400000;
+ tte_data += 0x400000;
}
} else {
- prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
- prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
- if (bigkernel) {
- tlb_ent -= 1;
- prom_dtlb_load(tlb_ent,
- tte_data + 0x400000,
- tte_vaddr + 0x400000);
- prom_itlb_load(tlb_ent,
- tte_data + 0x400000,
- tte_vaddr + 0x400000);
+ for (i = 0; i < num_kernel_image_mappings; i++) {
+ prom_dtlb_load(tlb_ent - i, tte_data, tte_vaddr);
+ prom_itlb_load(tlb_ent - i, tte_data, tte_vaddr);
+ tte_vaddr += 0x400000;
+ tte_data += 0x400000;
}
- sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
+ sparc64_highest_unlocked_tlb_ent = tlb_ent - i;
}
if (tlb_type == cheetah_plus) {
sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
/* paging_init() sets up the page tables */
-extern void cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern void cpu_probe(void);
extern void central_probe(void);
static unsigned long last_valid_pfn;
shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE);
real_end = (unsigned long)_end;
- if ((real_end > ((unsigned long)KERNBASE + 0x400000)))
- bigkernel = 1;
- if ((real_end > ((unsigned long)KERNBASE + 0x800000))) {
- prom_printf("paging_init: Kernel > 8MB, too large.\n");
- prom_halt();
- }
+ num_kernel_image_mappings = DIV_ROUND_UP(real_end - KERNBASE, 1 << 22);
+ printk("Kernel: Using %d locked TLB entries for main kernel image.\n",
+ num_kernel_image_mappings);
/* Set kernel pgd to upper alias so physical page computations
* work.
void flush_tlb_pending(void)
{
- struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
-
- preempt_disable();
+ struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
if (mp->tlb_nr) {
flush_tsb_user(mp);
mp->tlb_nr = 0;
}
- preempt_enable();
+ put_cpu_var(mmu_gathers);
}
void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
static void uml_net_set_multicast_list(struct net_device *dev)
{
- if (dev->flags & IFF_PROMISC)
- return;
- else if (dev->mc_count)
- dev->flags |= IFF_ALLMULTI;
- else dev->flags &= ~IFF_ALLMULTI;
+ return;
}
static void uml_net_tx_timeout(struct net_device *dev)
get them easily into strings. */
asm("\t.section .rodata, \"a\"\nintelnops: "
GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
- GENERIC_NOP7 GENERIC_NOP8);
+ GENERIC_NOP7 GENERIC_NOP8
+ "\t.previous");
extern const unsigned char intelnops[];
static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
NULL,
#ifdef K8_NOP1
asm("\t.section .rodata, \"a\"\nk8nops: "
K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
- K8_NOP7 K8_NOP8);
+ K8_NOP7 K8_NOP8
+ "\t.previous");
extern const unsigned char k8nops[];
static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
NULL,
#ifdef K7_NOP1
asm("\t.section .rodata, \"a\"\nk7nops: "
K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
- K7_NOP7 K7_NOP8);
+ K7_NOP7 K7_NOP8
+ "\t.previous");
extern const unsigned char k7nops[];
static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
NULL,
#ifdef P6_NOP1
asm("\t.section .rodata, \"a\"\np6nops: "
P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
- P6_NOP7 P6_NOP8);
+ P6_NOP7 P6_NOP8
+ "\t.previous");
extern const unsigned char p6nops[];
static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
NULL,
panic("Kernel requires i486+ for 'invlpg' and other features");
#endif
-/*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
- if (!cpu_has_tsc)
- panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
/*
* If we were told we had a good local APIC, check for buggy Pentia,
* i.e. all B steppings and the C2 stepping of P54C when using their
*/
static int speedstep_smi_ownership (void)
{
- u32 command, result, magic;
+ u32 command, result, magic, dummy;
u32 function = GET_SPEEDSTEP_OWNER;
unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
__asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=D" (result)
+ "pop %%ebp\n"
+ : "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+ "=S" (dummy)
: "a" (command), "b" (function), "c" (0), "d" (smi_port),
"D" (0), "S" (magic)
: "memory"
*/
static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
{
- u32 command, result = 0, edi, high_mhz, low_mhz;
+ u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
u32 state=0;
u32 function = GET_SPEEDSTEP_FREQS;
dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
static int speedstep_get_state (void)
{
u32 function=GET_SPEEDSTEP_STATE;
- u32 result, state, edi, command;
+ u32 result, state, edi, command, dummy;
command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
- __asm__ __volatile__("movl $0, %%edi\n"
+ __asm__ __volatile__(
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=a" (result), "=b" (state), "=D" (edi)
- : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+ "pop %%ebp\n"
+ : "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
);
dprintk("state is %x, result is %x\n", state, result);
*/
static void speedstep_set_state (unsigned int state)
{
- unsigned int result = 0, command, new_state;
+ unsigned int result = 0, command, new_state, dummy;
unsigned long flags;
unsigned int function=SET_SPEEDSTEP_STATE;
unsigned int retry = 0;
}
retry++;
__asm__ __volatile__(
- "movl $0, %%edi\n"
+ "push %%ebp\n"
"out %%al, (%%dx)\n"
- : "=b" (new_state), "=D" (result)
- : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+ "pop %%ebp"
+ : "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+ "=d" (dummy), "=S" (dummy)
+ : "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
);
} while ((new_state != state) && (retry <= SMI_TRIES));
if (new_state == state) {
dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
} else {
- printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+ printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
}
return;
}
/**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
*/
static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
{
}
}
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/* [SUMMARY] Get a free MTRR.
- <base> The starting (base) address of the region.
- <size> The size (in bytes) of the region.
- [RETURNS] The index of the region on success, else -1 on error.
-*/
{
int i, max;
mtrr_type ltype;
}
/**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
*/
static int set_fixed_ranges(mtrr_type * frs)
{
static u32 deftype_lo, deftype_hi;
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
static unsigned long set_mtrr_state(void)
-/* [SUMMARY] Set the MTRR state for this CPU.
- <state> The MTRR state information to read.
- <ctxt> Some relevant CPU context.
- [NOTE] The CPU must already be in a safe state for MTRR changes.
- [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
{
unsigned int i;
unsigned long change_mask = 0;
wd_ops = &p6_wd_ops;
break;
case 15:
- if (boot_cpu_data.x86_model > 0x4)
- return;
-
wd_ops = &p4_wd_ops;
break;
default:
{
if (!wd_ops) {
probe_nmi_watchdog();
- if (!wd_ops)
+ if (!wd_ops) {
+ printk(KERN_INFO "NMI watchdog: CPU not supported\n");
return -1;
+ }
if (!wd_ops->reserve()) {
printk(KERN_ERR
#ifdef CONFIG_HPET_EMULATE_RTC
hpet_reserve_timer(&hd, 1);
#endif
+
hd.hd_irq[0] = HPET_LEGACY_8254;
hd.hd_irq[1] = HPET_LEGACY_RTC;
- for (i = 2; i < nrtimers; timer++, i++)
- hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
- Tn_INT_ROUTE_CNF_SHIFT;
+ for (i = 2; i < nrtimers; timer++, i++)
+ hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
+ Tn_INT_ROUTE_CNF_SHIFT;
+
hpet_alloc(&hd);
+
}
#else
static void hpet_reserve_platform_timers(unsigned long id) { }
DMI_MATCH(DMI_BOARD_NAME, "30B9")
}
},
+ {
+ .callback = dmi_io_delay_0xed_port,
+ .ident = "HP Pavilion dv6000",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+ DMI_MATCH(DMI_BOARD_NAME, "30B8")
+ }
+ },
{
.callback = dmi_io_delay_0xed_port,
.ident = "HP Pavilion tx1000",
void arch_crash_save_vmcoreinfo(void)
{
+ VMCOREINFO_SYMBOL(phys_base);
VMCOREINFO_SYMBOL(init_level4_pgt);
#ifdef CONFIG_NUMA
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
#include <asm/geode.h>
static struct mfgpt_timer_t {
nommu:
/* Should not happen anymore */
- printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
- KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
+ printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+ KERN_WARNING "falling back to iommu=soft.\n");
return -1;
}
!gart_iommu_aperture ||
(no_agp && init_k8_gatt(&info) < 0)) {
if (end_pfn > MAX_DMA32_PFN) {
- printk(KERN_ERR "WARNING more than 4GB of memory "
- "but GART IOMMU not available.\n"
- KERN_ERR "WARNING 32bit PCI may malfunction.\n");
+ printk(KERN_WARNING "More than 4GB of memory "
+ "but GART IOMMU not available.\n"
+ KERN_WARNING "falling back to iommu=soft.\n");
}
return;
}
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
void disable_hlt(void)
{
while (!need_resched()) {
void (*idle)(void);
- if (__get_cpu_var(cpu_idle_state))
- __get_cpu_var(cpu_idle_state) = 0;
-
check_pgt_cache();
rmb();
idle = pm_idle;
{
}
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
void cpu_idle_wait(void)
{
- unsigned int cpu, this_cpu = get_cpu();
- cpumask_t map, tmp = current->cpus_allowed;
-
- set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
- put_cpu();
-
- cpus_clear(map);
- for_each_online_cpu(cpu) {
- per_cpu(cpu_idle_state, cpu) = 1;
- cpu_set(cpu, map);
- }
-
- __get_cpu_var(cpu_idle_state) = 0;
-
- wmb();
- do {
- ssleep(1);
- for_each_online_cpu(cpu) {
- if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
- cpu_clear(cpu, map);
- }
- cpus_and(map, map, cpu_online_map);
- /*
- * We waited 1 sec, if a CPU still did not call idle
- * it may be because it is in idle and not waking up
- * because it has nothing to do.
- * Give all the remaining CPUS a kick.
- */
- smp_call_function_mask(map, do_nothing, NULL, 0);
- } while (!cpus_empty(map));
-
- set_cpus_allowed(current, tmp);
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 0, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
*/
void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
static ATOMIC_NOTIFIER_HEAD(idle_notifier);
while (!need_resched()) {
void (*idle)(void);
- if (__get_cpu_var(cpu_idle_state))
- __get_cpu_var(cpu_idle_state) = 0;
-
rmb();
idle = pm_idle;
if (!idle)
{
}
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
void cpu_idle_wait(void)
{
- unsigned int cpu, this_cpu = get_cpu();
- cpumask_t map, tmp = current->cpus_allowed;
-
- set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
- put_cpu();
-
- cpus_clear(map);
- for_each_online_cpu(cpu) {
- per_cpu(cpu_idle_state, cpu) = 1;
- cpu_set(cpu, map);
- }
-
- __get_cpu_var(cpu_idle_state) = 0;
-
- wmb();
- do {
- ssleep(1);
- for_each_online_cpu(cpu) {
- if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
- cpu_clear(cpu, map);
- }
- cpus_and(map, map, cpu_online_map);
- /*
- * We waited 1 sec, if a CPU still did not call idle
- * it may be because it is in idle and not waking up
- * because it has nothing to do.
- * Give all the remaining CPUS a kick.
- */
- smp_call_function_mask(map, do_nothing, 0, 0);
- } while (!cpus_empty(map));
-
- set_cpus_allowed(current, tmp);
+ smp_mb();
+ /* kick all the CPUs so that they exit out of pm_idle */
+ smp_call_function(do_nothing, NULL, 0, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
return sizeof(ret);
}
-static int ptrace_bts_write_record(struct task_struct *child,
- const struct bts_struct *in)
-{
- int retval;
-
- if (!child->thread.ds_area_msr)
- return -ENXIO;
-
- retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
- if (retval)
- return retval;
-
- return sizeof(*in);
-}
-
static int ptrace_bts_clear(struct task_struct *child)
{
if (!child->thread.ds_area_msr)
return end;
}
-static int ptrace_bts_realloc(struct task_struct *child,
- int size, int reduce_size)
-{
- unsigned long rlim, vm;
- int ret, old_size;
-
- if (size < 0)
- return -EINVAL;
-
- old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
- if (old_size < 0)
- return old_size;
-
- ret = ds_free((void **)&child->thread.ds_area_msr);
- if (ret < 0)
- goto out;
-
- size >>= PAGE_SHIFT;
- old_size >>= PAGE_SHIFT;
-
- current->mm->total_vm -= old_size;
- current->mm->locked_vm -= old_size;
-
- if (size == 0)
- goto out;
-
- rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->total_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->total_vm;
- if (size <= 0)
- goto out;
- }
-
- rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
- vm = current->mm->locked_vm + size;
- if (rlim < vm) {
- ret = -ENOMEM;
-
- if (!reduce_size)
- goto out;
-
- size = rlim - current->mm->locked_vm;
- if (size <= 0)
- goto out;
- }
-
- ret = ds_allocate((void **)&child->thread.ds_area_msr,
- size << PAGE_SHIFT);
- if (ret < 0)
- goto out;
-
- current->mm->total_vm += size;
- current->mm->locked_vm += size;
-
-out:
- if (child->thread.ds_area_msr)
- set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
- else
- clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
- return ret;
-}
-
static int ptrace_bts_config(struct task_struct *child,
long cfg_size,
const struct ptrace_bts_config __user *ucfg)
return sizeof(cfg);
}
+
+static int ptrace_bts_write_record(struct task_struct *child,
+ const struct bts_struct *in)
+{
+ int retval;
+
+ if (!child->thread.ds_area_msr)
+ return -ENXIO;
+
+ retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
+ if (retval)
+ return retval;
+
+ return sizeof(*in);
+}
+
+static int ptrace_bts_realloc(struct task_struct *child,
+ int size, int reduce_size)
+{
+ unsigned long rlim, vm;
+ int ret, old_size;
+
+ if (size < 0)
+ return -EINVAL;
+
+ old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
+ if (old_size < 0)
+ return old_size;
+
+ ret = ds_free((void **)&child->thread.ds_area_msr);
+ if (ret < 0)
+ goto out;
+
+ size >>= PAGE_SHIFT;
+ old_size >>= PAGE_SHIFT;
+
+ current->mm->total_vm -= old_size;
+ current->mm->locked_vm -= old_size;
+
+ if (size == 0)
+ goto out;
+
+ rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->total_vm + size;
+ if (rlim < vm) {
+ ret = -ENOMEM;
+
+ if (!reduce_size)
+ goto out;
+
+ size = rlim - current->mm->total_vm;
+ if (size <= 0)
+ goto out;
+ }
+
+ rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+ vm = current->mm->locked_vm + size;
+ if (rlim < vm) {
+ ret = -ENOMEM;
+
+ if (!reduce_size)
+ goto out;
+
+ size = rlim - current->mm->locked_vm;
+ if (size <= 0)
+ goto out;
+ }
+
+ ret = ds_allocate((void **)&child->thread.ds_area_msr,
+ size << PAGE_SHIFT);
+ if (ret < 0)
+ goto out;
+
+ current->mm->total_vm += size;
+ current->mm->locked_vm += size;
+
+out:
+ if (child->thread.ds_area_msr)
+ set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+ else
+ clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+
+ return ret;
+}
+
void ptrace_bts_take_timestamp(struct task_struct *tsk,
enum bts_qualifier qualifier)
{
*/
min_low_pfn = PFN_UP(init_pg_tables_end);
- find_max_pfn();
-
max_low_pfn = find_max_low_pfn();
#ifdef CONFIG_HIGHMEM
if (efi_enabled)
efi_init();
- max_low_pfn = setup_memory();
-
/* update e820 for memory not covered by WB MTRRs */
+ find_max_pfn();
mtrr_bp_init();
if (mtrr_trim_uncached_memory(max_pfn))
- max_low_pfn = setup_memory();
+ find_max_pfn();
+
+ max_low_pfn = setup_memory();
#ifdef CONFIG_VMI
/*
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
node = apicid_to_node[apicid];
- if (node == NUMA_NO_NODE)
+ if (node == NUMA_NO_NODE || !node_online(node))
node = first_node(node_online_map);
numa_set_node(cpu, node);
*/
static void write_debugctlmsr(struct task_struct *child, unsigned long val)
{
+ if (child->thread.debugctlmsr == val)
+ return;
+
child->thread.debugctlmsr = val;
if (child != current)
write_debugctlmsr(child,
child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
} else {
- write_debugctlmsr(child,
- child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
+ write_debugctlmsr(child,
+ child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
- if (!child->thread.debugctlmsr)
- clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+ if (!child->thread.debugctlmsr)
+ clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
}
}
asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
{
int ret = do_set_thread_area(current, -1, u_info, 1);
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, u_info);
return ret;
}
asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
{
int ret = do_get_thread_area(current, -1, u_info);
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, u_info);
return ret;
}
ref_freq, freq->new);
if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
tsc_khz = cpu_khz;
- preempt_disable();
- set_cyc2ns_scale(cpu_khz, smp_processor_id());
- preempt_enable();
+ set_cyc2ns_scale(cpu_khz, freq->cpu);
/*
* TSC based sched_clock turns
* to junk w/ cpufreq
mark_tsc_unstable("cpufreq changes");
}
- preempt_disable();
- set_cyc2ns_scale(tsc_khz_ref, smp_processor_id());
- preempt_enable();
+ set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
return 0;
}
static int is_rmap_pte(u64 pte)
{
- return pte != shadow_trap_nonpresent_pte
- && pte != shadow_notrap_nonpresent_pte;
+ return is_shadow_present_pte(pte);
}
static gfn_t pse36_gfn_delta(u32 gpte)
int *ptwrite, gfn_t gfn, struct page *page)
{
u64 spte;
- int was_rmapped = is_rmap_pte(*shadow_pte);
+ int was_rmapped = 0;
int was_writeble = is_writeble_pte(*shadow_pte);
+ hfn_t host_pfn = (*shadow_pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
pgprintk("%s: spte %llx access %x write_fault %d"
" user_fault %d gfn %lx\n",
__FUNCTION__, *shadow_pte, pt_access,
write_fault, user_fault, gfn);
+ if (is_rmap_pte(*shadow_pte)) {
+ if (host_pfn != page_to_pfn(page)) {
+ pgprintk("hfn old %lx new %lx\n",
+ host_pfn, page_to_pfn(page));
+ rmap_remove(vcpu->kvm, shadow_pte);
+ }
+ else
+ was_rmapped = 1;
+ }
+
/*
* We don't set the accessed bit, since we sometimes want to see
* whether the guest actually used the pte (in order to detect
up_read(¤t->mm->mmap_sem);
vcpu->arch.update_pte.gfn = gfn;
- vcpu->arch.update_pte.page = gfn_to_page(vcpu->kvm, gfn);
+ vcpu->arch.update_pte.page = page;
}
void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
static void reload_tss(void)
{
-#ifndef CONFIG_X86_64
-
/*
* VT restores TR but not its size. Useless.
*/
descs = (void *)gdt.base;
descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
load_TR_desc();
-#endif
}
static void load_transition_efer(struct vcpu_vmx *vmx)
int ret = 0;
int r;
- down_read(¤t->mm->mmap_sem);
+ down_read(&kvm->slots_lock);
r = kvm_clear_guest_page(kvm, fn, 0, PAGE_SIZE);
if (r < 0)
goto out;
ret = 1;
out:
- up_read(¤t->mm->mmap_sem);
+ up_read(&kvm->slots_lock);
return ret;
}
* (such as the example in Documentation/lguest/lguest.c) is called the
* Launcher.
*
- * Secondly, we only run specially modified Guests, not normal kernels. When
- * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets
- * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows
- * how to be a Guest. This means that you can use the same kernel you boot
- * normally (ie. as a Host) as a Guest.
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time. This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
*
* These Guests know that they cannot do privileged operations, such as disable
* interrupts, and that they have to ask the Host to do such things explicitly.
* This file consists of all the replacements for such low-level native
* hardware operations: these special Guest versions call the Host.
*
- * So how does the kernel know it's a Guest? The Guest starts at a special
- * entry point marked with a magic string, which sets up a few things then
- * calls here. We replace the native functions various "paravirt" structures
- * with our Guest versions, then boot like normal. :*/
+ * So how does the kernel know it's a Guest? We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal. :*/
/*
* Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
* lguest_leave_lazy_mode().
*
* So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing. */
+ * future processing: */
static void lazy_hcall(unsigned long call,
unsigned long arg1,
unsigned long arg2,
}
/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue a hypercall to flush any stored calls. */
+ * issue the do-nothing hypercall to flush any stored calls. */
static void lguest_leave_lazy_mode(void)
{
paravirt_leave_lazy(paravirt_get_lazy_mode());
*
* So instead we keep an "irq_enabled" field inside our "struct lguest_data",
* which the Guest can update with a single instruction. The Host knows to
- * check there when it wants to deliver an interrupt.
+ * check there before it tries to deliver an interrupt.
*/
/* save_flags() is expected to return the processor state (ie. "flags"). The
/*M:003 Note that we don't check for outstanding interrupts when we re-enable
* them (or when we unmask an interrupt). This seems to work for the moment,
* since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but when we turn on CONFIG_NO_HZ, we should revisit this. One way
+ * tick, but now we can run with CONFIG_NO_HZ, we should revisit this. One way
* would be to put the "irq_enabled" field in a page by itself, and have the
* Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled. :*/
+ * There will then be a page fault as soon as interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag. If an interrupt does come
+ * in, we then disable them for real. This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency. :*/
/*G:034
* The Interrupt Descriptor Table (IDT).
static void lguest_write_idt_entry(gate_desc *dt,
int entrynum, const gate_desc *g)
{
+ /* The gate_desc structure is 8 bytes long: we hand it to the Host in
+ * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
+ * around like this; typesafety wasn't a big concern in Linux's early
+ * years. */
u32 *desc = (u32 *)g;
/* Keep the local copy up to date. */
native_write_idt_entry(dt, entrynum, g);
*
* This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
* hypercall and use that repeatedly to load a new IDT. I don't think it
- * really matters, but wouldn't it be nice if they were the same?
+ * really matters, but wouldn't it be nice if they were the same? Wouldn't
+ * it be even better if you were the one to send the patch to fix it?
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
/* The "cpuid" instruction is a way of querying both the CPU identity
* (manufacturer, model, etc) and its features. It was introduced before the
- * Pentium in 1993 and keeps getting extended by both Intel and AMD. As you
- * might imagine, after a decade and a half this treatment, it is now a giant
- * ball of hair. Its entry in the current Intel manual runs to 28 pages.
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
*
* This instruction even it has its own Wikipedia entry. The Wikipedia entry
* has been translated into 4 languages. I am not making this up!
return lguest_data.time.tv_sec;
}
-/* The TSC is a Time Stamp Counter. The Host tells us what speed it runs at,
- * or 0 if it's unusable as a reliable clock source. This matches what we want
- * here: if we return 0 from this function, the x86 TSC clock will not register
- * itself. */
+/* The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself. */
static unsigned long lguest_cpu_khz(void)
{
return lguest_data.tsc_khz;
}
-/* If we can't use the TSC, the kernel falls back to our "lguest_clock", where
- * we read the time value given to us by the Host. */
+/* If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host. */
static cycle_t lguest_clock_read(void)
{
unsigned long sec, nsec;
static int lguest_clockevent_set_next_event(unsigned long delta,
struct clock_event_device *evt)
{
+ /* FIXME: I don't think this can ever happen, but James tells me he had
+ * to put this code in. Maybe we should remove it now. Anyone? */
if (delta < LG_CLOCK_MIN_DELTA) {
if (printk_ratelimit())
printk(KERN_DEBUG "%s: small delta %lu ns\n",
__FUNCTION__, delta);
return -ETIME;
}
+
+ /* Please wake us this far in the future. */
hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
return 0;
}
* will not tolerate us trying to use that), the stack pointer, and the number
* of pages in the stack. */
static void lguest_load_sp0(struct tss_struct *tss,
- struct thread_struct *thread)
+ struct thread_struct *thread)
{
lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
THREAD_SIZE/PAGE_SIZE);
hcall(LHCALL_HALT, 0, 0, 0);
}
-/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a
- * message out when we're crashing as well as elegant termination like powering
- * off.
+/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
*
* Note that the Host always prefers that the Guest speak in physical addresses
* rather than virtual addresses, so we use __pa() here. */
/* Setting up memory is fairly easy. */
static __init char *lguest_memory_setup(void)
{
- /* We do this here and not earlier because lockcheck barfs if we do it
- * before start_kernel() */
+ /* We do this here and not earlier because lockcheck used to barf if we
+ * did it before start_kernel(). I think we fixed that, so it'd be
+ * nice to move it back to lguest_init. Patch welcome... */
atomic_notifier_chain_register(&panic_notifier_list, &paniced);
/* The Linux bootloader header contains an "e820" memory map: the
return len;
}
+/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us. */
+static void lguest_restart(char *reason)
+{
+ hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+}
+
/*G:050
* Patching (Powerfully Placating Performance Pedants)
*
- * We have already seen that pv_ops structures let us replace simple
- * native instructions with calls to the appropriate back end all throughout
- * the kernel. This allows the same kernel to run as a Guest and as a native
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel. This allows the same kernel to run as a Guest and as a native
* kernel, but it's slow because of all the indirect branches.
*
* Remember that David Wheeler quote about "Any problem in computer science can
return insn_len;
}
-static void lguest_restart(char *reason)
-{
- hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
-}
-
-/*G:030 Once we get to lguest_init(), we know we're a Guest. The pv_ops
- * structures in the kernel provide points for (almost) every routine we have
- * to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest. The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions. */
__init void lguest_init(void)
{
/* We're under lguest, paravirt is enabled, and we're running at
* the normal data segment to get through booting. */
asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
- /* The Host uses the top of the Guest's virtual address space for the
- * Host<->Guest Switcher, and it tells us how big that is in
- * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
+ /* The Host<->Guest Switcher lives at the top of our address space, and
+ * the Host told us how big it is when we made LGUEST_INIT hypercall:
+ * it put the answer in lguest_data.reserve_mem */
reserve_top_address(lguest_data.reserve_mem);
/* If we don't initialize the lock dependency checker now, it crashes
/* Math is always hard! */
new_cpu_data.hard_math = 1;
+ /* We don't have features. We have puppies! Puppies! */
#ifdef CONFIG_X86_MCE
mce_disabled = 1;
#endif
virtio_cons_early_init(early_put_chars);
/* Last of all, we set the power management poweroff hook to point to
- * the Guest routine to power off. */
+ * the Guest routine to power off, and the reboot hook to our restart
+ * routine. */
pm_power_off = lguest_power_off;
-
machine_ops.restart = lguest_restart;
+
/* Now we're set up, call start_kernel() in init/main.c and we proceed
* to boot as normal. It never returns. */
start_kernel();
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
-/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here.
+/*G:020 Our story starts with the kernel booting into startup_32 in
+ * arch/x86/kernel/head_32.S. It expects a boot header, which is created by
+ * the bootloader (the Launcher in our case).
+ *
+ * The startup_32 function does very little: it clears the uninitialized global
+ * C variables which we expect to be zero (ie. BSS) and then copies the boot
+ * header and kernel command line somewhere safe. Finally it checks the
+ * 'hardware_subarch' field. This was introduced in 2.6.24 for lguest and Xen:
+ * if it's set to '1' (lguest's assigned number), then it calls us here.
*
* WARNING: be very careful here! We're running at addresses equal to physical
* addesses (around 0), not above PAGE_OFFSET as most code expectes
* (eg. 0xC0000000). Jumps are relative, so they're OK, but we can't touch any
- * data.
+ * data without remembering to subtract __PAGE_OFFSET!
*
* The .section line puts this code in .init.text so it will be discarded after
* boot. */
int $LGUEST_TRAP_ENTRY
/* The Host put the toplevel pagetable in lguest_data.pgdir. The movsl
- * instruction uses %esi implicitly as the source for the copy we'
+ * instruction uses %esi implicitly as the source for the copy we're
* about to do. */
movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
/*
- * Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- * RDC321x architecture specific GPIO support
+ * GPIO support for RDC SoC R3210/R8610
+ *
+ * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
*/
-#include <linux/autoconf.h>
-#include <linux/init.h>
+
+#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/delay.h>
+#include <asm/gpio.h>
#include <asm/mach-rdc321x/rdc321x_defs.h>
-static inline int rdc_gpio_is_valid(unsigned gpio)
+
+/* spin lock to protect our private copy of GPIO data register plus
+ the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static u32 gpio_request_data[2];
+
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
{
- return (gpio <= RDC_MAX_GPIO);
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+ outl(value, RDC3210_CFGREG_DATA);
}
-static unsigned int rdc_gpio_read(unsigned gpio)
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
{
- unsigned int val;
-
- val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
- outl(val, RDC3210_CFGREG_ADDR);
- udelay(10);
- val = inl(RDC3210_CFGREG_DATA);
- val |= (0x1 << (gpio & 0x1F));
- outl(val, RDC3210_CFGREG_DATA);
- udelay(10);
- val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
- outl(val, RDC3210_CFGREG_ADDR);
- udelay(10);
- val = inl(RDC3210_CFGREG_DATA);
-
- return val;
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+ value |= inl(RDC3210_CFGREG_DATA);
+ outl(value, RDC3210_CFGREG_DATA);
}
-static void rdc_gpio_write(unsigned int val)
+static inline u32 rdc321x_conf_read(unsigned addr)
{
- if (val) {
- outl(val, RDC3210_CFGREG_DATA);
- udelay(10);
- }
+ outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+ return inl(RDC3210_CFGREG_DATA);
}
-int rdc_gpio_get_value(unsigned gpio)
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ rdc321x_conf_or(gpio < 32
+ ? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+ 1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* initially setup the 2 copies of the gpio data registers.
+ This function must be called by the platform setup code. */
+void __init rdc321x_gpio_setup()
+{
+ /* this might not be, what others (BIOS, bootloader, etc.)
+ wrote to these registers before, but it's a good guess. Still
+ better than just using 0xffffffff. */
+
+ gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+ gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+}
+
+/* determine, if gpio number is valid */
+static inline int rdc321x_is_gpio(unsigned gpio)
+{
+ return gpio <= RDC321X_MAX_GPIO;
+}
+
+/* request GPIO */
+int rdc_gpio_request(unsigned gpio, const char *label)
{
- if (rdc_gpio_is_valid(gpio))
- return (int)rdc_gpio_read(gpio);
- else
+ unsigned long flags;
+
+ if (!rdc321x_is_gpio(gpio))
return -EINVAL;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
+ goto inuse;
+ gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
+inuse:
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ return -EINVAL;
}
-EXPORT_SYMBOL(rdc_gpio_get_value);
+EXPORT_SYMBOL(rdc_gpio_request);
-void rdc_gpio_set_value(unsigned gpio, int value)
+/* release previously-claimed GPIO */
+void rdc_gpio_free(unsigned gpio)
{
- unsigned int val;
+ unsigned long flags;
- if (!rdc_gpio_is_valid(gpio))
+ if (!rdc321x_is_gpio(gpio))
return;
- val = rdc_gpio_read(gpio);
+ spin_lock_irqsave(&gpio_lock, flags);
+ gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
+ spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(rdc_gpio_free);
+
+/* read GPIO pin */
+int rdc_gpio_get_value(unsigned gpio)
+{
+ u32 reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&gpio_lock, flags);
+ reg = rdc321x_conf_read(gpio < 32
+ ? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+ spin_unlock_irqrestore(&gpio_lock, flags);
- if (value)
- val &= ~(0x1 << (gpio & 0x1F));
- else
- val |= (0x1 << (gpio & 0x1F));
+ return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
- rdc_gpio_write(val);
+/* set GPIO pin to value */
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+ unsigned long flags;
+ u32 reg;
+
+ reg = 1 << (gpio & 0x1f);
+ if (gpio < 32) {
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (value)
+ gpio_data_reg1 |= reg;
+ else
+ gpio_data_reg1 &= ~reg;
+ rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ } else {
+ spin_lock_irqsave(&gpio_lock, flags);
+ if (value)
+ gpio_data_reg2 |= reg;
+ else
+ gpio_data_reg2 &= ~reg;
+ rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+ spin_unlock_irqrestore(&gpio_lock, flags);
+ }
}
EXPORT_SYMBOL(rdc_gpio_set_value);
+/* configure GPIO pin as input */
int rdc_gpio_direction_input(unsigned gpio)
{
+ if (!rdc321x_is_gpio(gpio))
+ return -EINVAL;
+
+ rdc321x_configure_gpio(gpio);
+
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_input);
+/* configure GPIO pin as output and set value */
int rdc_gpio_direction_output(unsigned gpio, int value)
{
+ if (!rdc321x_is_gpio(gpio))
+ return -EINVAL;
+
+ gpio_set_value(gpio, value);
+ rdc321x_configure_gpio(gpio);
+
return 0;
}
EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
static int __init rdc_board_setup(void)
{
+ rdc321x_gpio_setup();
+
return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
}
* this space and use it to adjust the boundary between ZONE_NORMAL
* and ZONE_HIGHMEM.
*/
- find_max_pfn();
get_memcfg_numa();
kva_pages = calculate_numa_remap_pages();
int prefetch = 0;
unsigned char *max_instr;
-#ifdef CONFIG_X86_32
- if (!(__supported_pte_mask & _PAGE_NX))
- return 0;
-#endif
-
- /* If it was a exec fault on NX page, ignore */
+ /*
+ * If it was a exec (instruction fetch) fault on NX page, then
+ * do not ignore the fault:
+ */
if (error_code & PF_INSTR)
return 0;
{
enum fixed_addresses idx;
unsigned long vaddr;
- /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-
- debug_kmap_atomic_prot(type);
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
pagefault_disable();
if (!PageHighMem(page))
return page_address(page);
+ debug_kmap_atomic_prot(type);
+
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
BUG_ON(!pte_none(*(kmap_pte-idx)));
page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
- WARN_ON(!PageCompound(page));
+ WARN_ON(!PageHead(page));
return page;
}
* have to convert them into an offset in a page-aligned mapping, but the
* caller shouldn't need to know that small detail.
*/
-static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
+static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
enum ioremap_mode mode)
{
unsigned long pfn, offset, last_addr, vaddr;
switch (mode) {
case IOR_MODE_UNCACHED:
default:
- prot = PAGE_KERNEL_NOCACHE;
+ /*
+ * FIXME: we will use UC MINUS for now, as video fb drivers
+ * depend on it. Upcoming ioremap_wc() will fix this behavior.
+ */
+ prot = PAGE_KERNEL_UC_MINUS;
break;
case IOR_MODE_CACHED:
prot = PAGE_KERNEL;
*
* Must be freed with iounmap.
*/
-void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size)
{
return __ioremap(phys_addr, size, IOR_MODE_UNCACHED);
}
EXPORT_SYMBOL(ioremap_nocache);
-void __iomem *ioremap_cache(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
{
return __ioremap(phys_addr, size, IOR_MODE_CACHED);
}
int set_memory_uc(unsigned long addr, int numpages)
{
return change_page_attr_set(addr, numpages,
- __pgprot(_PAGE_PCD | _PAGE_PWT));
+ __pgprot(_PAGE_PCD));
}
EXPORT_SYMBOL(set_memory_uc);
*
* 0: not available, 1: available
*/
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
static void __init xen_vcpu_setup(int cpu)
{
int err;
struct vcpu_info *vcpup;
+ BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
if (!have_vcpu_info_placement)
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned level, unsigned long pfn)
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
{
struct mmuext_op op;
- op.cmd = level;
+ op.cmd = cmd;
op.arg1.mfn = pfn_to_mfn(pfn);
if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
BUG();
if (!PageHighMem(page)) {
make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
- pin_pagetable_pfn(level, pfn);
+ if (level == PT_PTE)
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
} else
/* make sure there are no stray mappings of
this page */
static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
{
- xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
+ xen_alloc_ptpage(mm, pfn, PT_PTE);
}
static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
{
- xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
+ xen_alloc_ptpage(mm, pfn, PT_PMD);
}
/* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_ptpage(u32 pfn, unsigned level)
{
struct page *page = pfn_to_page(pfn);
if (PagePinned(page)) {
if (!PageHighMem(page)) {
- pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+ if (level == PT_PTE)
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
+ ClearPagePinned(page);
}
}
+static void xen_release_pt(u32 pfn)
+{
+ xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pd(u32 pfn)
+{
+ xen_release_ptpage(pfn, PT_PMD);
+}
+
#ifdef CONFIG_HIGHPTE
static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
{
PFN_DOWN(__pa(xen_start_info->pt_base)));
}
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static __init void setup_shared_info(void)
{
- /* This will work as long as patching hasn't happened yet
- (which it hasn't) */
- pv_mmu_ops.alloc_pt = xen_alloc_pt;
- pv_mmu_ops.alloc_pd = xen_alloc_pd;
- pv_mmu_ops.release_pt = xen_release_pt;
- pv_mmu_ops.release_pd = xen_release_pt;
- pv_mmu_ops.set_pte = xen_set_pte;
-
if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+ unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
/*
* Create a mapping for the shared info page.
* Should be set_fixmap(), but shared_info is a machine
* address with no corresponding pseudo-phys address.
*/
- set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+ set_pte_mfn(addr,
PFN_DOWN(xen_start_info->shared_info),
PAGE_KERNEL);
- HYPERVISOR_shared_info =
- (struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
+ HYPERVISOR_shared_info = (struct shared_info *)addr;
} else
HYPERVISOR_shared_info =
(struct shared_info *)__va(xen_start_info->shared_info);
+#ifndef CONFIG_SMP
+ /* In UP this is as good a place as any to set up shared info */
+ xen_setup_vcpu_info_placement();
+#endif
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+ /* This will work as long as patching hasn't happened yet
+ (which it hasn't) */
+ pv_mmu_ops.alloc_pt = xen_alloc_pt;
+ pv_mmu_ops.alloc_pd = xen_alloc_pd;
+ pv_mmu_ops.release_pt = xen_release_pt;
+ pv_mmu_ops.release_pd = xen_release_pd;
+ pv_mmu_ops.set_pte = xen_set_pte;
+
+ setup_shared_info();
+
/* Actually pin the pagetable down, but we can't set PG_pinned
yet because the page structures don't exist yet. */
{
x86_write_percpu(xen_cr3, __pa(pgd));
x86_write_percpu(xen_current_cr3, __pa(pgd));
-#ifdef CONFIG_SMP
/* Don't do the full vcpu_info placement stuff until we have a
- possible map. */
+ possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
- /* May as well do it now, since there's no good time to call
- it later on UP. */
- xen_setup_vcpu_info_placement();
-#endif
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
}
#endif /* CONFIG_X86_PAE */
-enum pt_level {
- PT_PGD,
- PT_PUD,
- PT_PMD,
- PT_PTE
-};
-
/*
(Yet another) pagetable walker. This one is intended for pinning a
pagetable. This means that it walks a pagetable and calls the
#include <linux/linkage.h>
#include <asm/page.h>
+enum pt_level {
+ PT_PGD,
+ PT_PUD,
+ PT_PMD,
+ PT_PTE
+};
+
/*
* Page-directory addresses above 4GB do not fit into architectural %cr3.
* When accessing %cr3, or equivalent field in vcpu_guest_context, guests
events, then enter the hypervisor to get them handled.
*/
ENTRY(xen_irq_enable_direct)
- /* Clear mask and test pending */
- andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+ /* Unmask events */
+ movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
+
+ /* Test for pending */
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
jz 1f
+
2: call check_events
1:
ENDPATCH(xen_irq_enable_direct)
/* Assume anything <= 4GB can be handled by IOMMU.
Actually some IOMMUs can handle everything, but I don't
know of a way to test this here. */
- if (b_pfn <= (min_t(u64, 0xffffffff, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
}
/*
- * Call func for each cic attached to this ioc. Returns number of cic's seen.
+ * Call func for each cic attached to this ioc.
*/
-static unsigned int
+static void
call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
{
struct cfq_io_context *cic;
struct hlist_node *n;
- int called = 0;
rcu_read_lock();
- hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list) {
+ hlist_for_each_entry_rcu(cic, n, &ioc->cic_list, cic_list)
func(ioc, cic);
- called++;
- }
rcu_read_unlock();
+}
+
+static void cfq_cic_free_rcu(struct rcu_head *head)
+{
+ struct cfq_io_context *cic;
+
+ cic = container_of(head, struct cfq_io_context, rcu_head);
+
+ kmem_cache_free(cfq_ioc_pool, cic);
+ elv_ioc_count_dec(ioc_count);
- return called;
+ if (ioc_gone && !elv_ioc_count_read(ioc_count))
+ complete(ioc_gone);
+}
+
+static void cfq_cic_free(struct cfq_io_context *cic)
+{
+ call_rcu(&cic->rcu_head, cfq_cic_free_rcu);
}
static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic)
hlist_del_rcu(&cic->cic_list);
spin_unlock_irqrestore(&ioc->lock, flags);
- kmem_cache_free(cfq_ioc_pool, cic);
+ cfq_cic_free(cic);
}
static void cfq_free_io_context(struct io_context *ioc)
{
- int freed;
-
/*
- * ioc->refcount is zero here, so no more cic's are allowed to be
- * linked into this ioc. So it should be ok to iterate over the known
- * list, we will see all cic's since no new ones are added.
+ * ioc->refcount is zero here, or we are called from elv_unregister(),
+ * so no more cic's are allowed to be linked into this ioc. So it
+ * should be ok to iterate over the known list, we will see all cic's
+ * since no new ones are added.
*/
- freed = call_for_each_cic(ioc, cic_free_func);
-
- elv_ioc_count_mod(ioc_count, -freed);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
+ call_for_each_cic(ioc, cic_free_func);
}
static void cfq_exit_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq)
static void __cfq_exit_single_io_context(struct cfq_data *cfqd,
struct cfq_io_context *cic)
{
+ struct io_context *ioc = cic->ioc;
+
list_del_init(&cic->queue_list);
/*
cic->dead_key = (unsigned long) cic->key;
cic->key = NULL;
+ if (ioc->ioc_data == cic)
+ rcu_assign_pointer(ioc->ioc_data, NULL);
+
if (cic->cfqq[ASYNC]) {
cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
cic->cfqq[ASYNC] = NULL;
*/
static void cfq_exit_io_context(struct io_context *ioc)
{
- rcu_assign_pointer(ioc->ioc_data, NULL);
call_for_each_cic(ioc, cfq_exit_single_io_context);
}
return cfqq;
}
-static void cfq_cic_free(struct cfq_io_context *cic)
-{
- kmem_cache_free(cfq_ioc_pool, cic);
- elv_ioc_count_dec(ioc_count);
-
- if (ioc_gone && !elv_ioc_count_read(ioc_count))
- complete(ioc_gone);
-}
-
/*
* We drop cfq io contexts lazily, so we may find a dead one.
*/
spin_lock_irqsave(&ioc->lock, flags);
- if (ioc->ioc_data == cic)
- rcu_assign_pointer(ioc->ioc_data, NULL);
+ BUG_ON(ioc->ioc_data == cic);
radix_tree_delete(&ioc->radix_root, (unsigned long) cfqd);
hlist_del_rcu(&cic->cic_list);
if (!cfq_pool)
goto fail;
- cfq_ioc_pool = KMEM_CACHE(cfq_io_context, SLAB_DESTROY_BY_RCU);
+ cfq_ioc_pool = KMEM_CACHE(cfq_io_context, 0);
if (!cfq_ioc_pool)
goto fail;
smp_wmb();
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
- synchronize_rcu();
cfq_slab_kill();
}
struct crypto_xcbc_ctx *ctx = crypto_hash_ctx_aligned(parent);
struct crypto_cipher *tfm = ctx->child;
int bs = crypto_hash_blocksize(parent);
- unsigned int i = 0;
- do {
-
- struct page *pg = sg_page(&sg[i]);
- unsigned int offset = sg[i].offset;
- unsigned int slen = sg[i].length;
+ for (;;) {
+ struct page *pg = sg_page(sg);
+ unsigned int offset = sg->offset;
+ unsigned int slen = sg->length;
if (unlikely(slen > nbytes))
slen = nbytes;
offset = 0;
pg++;
}
- i++;
- } while (nbytes>0);
+
+ if (!nbytes)
+ break;
+ sg = scatterwalk_sg_next(sg);
+ }
return 0;
}
*/
static struct prt_quirk prt_quirks[] = {
{ medion_md9580, 0, 0, 9, 'A',
- "\\_SB_.PCI0.ISA.LNKA",
- "\\_SB_.PCI0.ISA.LNKB"},
+ "\\_SB_.PCI0.ISA_.LNKA",
+ "\\_SB_.PCI0.ISA_.LNKB"},
{ dell_optiplex, 0, 0, 0xd, 'A',
"\\_SB_.LNKB",
"\\_SB_.LNKA"},
}
processors[pr->id] = NULL;
-
+ processor_device_array[pr->id] = NULL;
kfree(pr);
return 0;
return 0;
}
- acpi_unlazy_tlb(smp_processor_id());
/*
* Must be done before busmaster disable as we might need to
* access HPET !
return 0;
}
+ acpi_unlazy_tlb(smp_processor_id());
+
/* Tell the scheduler that we are going deep-idle: */
sched_clock_idle_sleep_event();
/*
switch (cx->type) {
case ACPI_STATE_C1:
state->flags |= CPUIDLE_FLAG_SHALLOW;
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ if (cx->entry_method == ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_VALID;
+
state->enter = acpi_idle_enter_c1;
dev->safe_state = state;
break;
goto end;
}
smb_hc_write(hc, ACPI_SMB_COMMAND, command);
- smb_hc_write(hc, ACPI_SMB_COMMAND, command);
if (!(protocol & 0x01)) {
smb_hc_write(hc, ACPI_SMB_BLOCK_COUNT, length);
for (i = 0; i < length; ++i)
int size)
{
int len;
+ int count;
- if (!acpi_dev->flags.hardware_id)
+ if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
return -ENODEV;
- len = snprintf(modalias, size, "acpi:%s:",
- acpi_dev->pnp.hardware_id);
- if (len < 0 || len >= size)
- return -EINVAL;
+ len = snprintf(modalias, size, "acpi:");
size -= len;
+ if (acpi_dev->flags.hardware_id) {
+ count = snprintf(&modalias[len], size, "%s:",
+ acpi_dev->pnp.hardware_id);
+ if (count < 0 || count >= size)
+ return -EINVAL;
+ len += count;
+ size -= count;
+ }
+
if (acpi_dev->flags.compatible_ids) {
struct acpi_compatible_id_list *cid_list;
int i;
- int count;
cid_list = acpi_dev->pnp.cid_list;
for (i = 0; i < cid_list->count; i++) {
#ifdef CONFIG_PM_SLEEP
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-static bool acpi_sleep_finish_wake_up;
-
-/*
- * ACPI 2.0 and later want us to execute _PTS after suspending devices, so we
- * allow the user to request that behavior by using the 'acpi_new_pts_ordering'
- * kernel command line option that causes the following variable to be set.
- */
-static bool new_pts_ordering;
-
-static int __init acpi_new_pts_ordering(char *str)
-{
- new_pts_ordering = true;
- return 1;
-}
-__setup("acpi_new_pts_ordering", acpi_new_pts_ordering);
#endif
static int acpi_sleep_prepare(u32 acpi_state)
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
- if (new_pts_ordering)
- return 0;
-
- error = acpi_sleep_prepare(acpi_state);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
static int acpi_pm_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
static void acpi_pm_end(void)
{
/*
- * This is necessary in case acpi_pm_finish() is not called directly
- * during a failing transition to a sleep state.
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_pm_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_pm_state_valid(suspend_state_t pm_state)
#ifdef CONFIG_HIBERNATION
static int acpi_hibernation_begin(void)
{
- int error;
-
acpi_target_sleep_state = ACPI_STATE_S4;
- if (new_pts_ordering)
- return 0;
- error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error)
- acpi_target_sleep_state = ACPI_STATE_S0;
- else
- acpi_sleep_finish_wake_up = true;
-
- return error;
+ return 0;
}
static int acpi_hibernation_prepare(void)
{
- if (new_pts_ordering) {
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
- acpi_sleep_finish_wake_up = true;
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
}
return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
- acpi_sleep_finish_wake_up = false;
}
static void acpi_hibernation_end(void)
{
/*
* This is necessary in case acpi_hibernation_finish() is not called
- * directly during a failing transition to the sleep state.
+ * during a failing transition to the sleep state.
*/
- if (acpi_sleep_finish_wake_up)
- acpi_hibernation_finish();
+ acpi_target_sleep_state = ACPI_STATE_S0;
}
static int acpi_hibernation_pre_restore(void)
tz->trips.active[i].flags.valid; i++, trips++);
tz->thermal_zone = thermal_zone_device_register("ACPI thermal zone",
trips, tz, &acpi_thermal_zone_ops);
- if (!tz->thermal_zone)
+ if (IS_ERR(tz->thermal_zone))
return -ENODEV;
result = sysfs_create_link(&tz->device->dev.kobj,
kfree(obj);
- if (device->cap._BCL && device->cap._BCM && max_level > 0) {
+ if (device->cap._BCL && device->cap._BCM && device->cap._BQC && max_level > 0){
int result;
static int count = 0;
char *name;
/* board_ahci_sb600 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
+ AHCI_HFLAG_32BIT_ONLY |
AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.link_flags = AHCI_LFLAG_COMMON,
{
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
- if (hpriv->flags & AHCI_HFLAG_SECT255)
+ if (hpriv->flags & AHCI_HFLAG_SECT255) {
dev->max_sectors = 255;
+ ata_dev_printk(dev, KERN_INFO,
+ "SB600 AHCI: limiting to 255 sectors per cmd\n");
+ }
}
static unsigned int ahci_dev_classify(struct ata_port *ap)
}
}
+/**
+ * atapi_cmd_type - Determine ATAPI command type from SCSI opcode
+ * @opcode: SCSI opcode
+ *
+ * Determine ATAPI command type from @opcode.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
+ */
+int atapi_cmd_type(u8 opcode)
+{
+ switch (opcode) {
+ case GPCMD_READ_10:
+ case GPCMD_READ_12:
+ return ATAPI_READ;
+
+ case GPCMD_WRITE_10:
+ case GPCMD_WRITE_12:
+ case GPCMD_WRITE_AND_VERIFY_10:
+ return ATAPI_WRITE;
+
+ case GPCMD_READ_CD:
+ case GPCMD_READ_CD_MSF:
+ return ATAPI_READ_CD;
+
+ case ATA_16:
+ case ATA_12:
+ if (atapi_passthru16)
+ return ATAPI_PASS_THRU;
+ /* fall thru */
+ default:
+ return ATAPI_MISC;
+ }
+}
+
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
ap->pm_policy = policy;
- ap->link.eh_info.action |= ATA_EHI_LPM;
+ ap->link.eh_info.action |= ATA_EH_LPM;
ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
ata_port_schedule_eh(ap);
}
/* read native max address */
rc = ata_read_native_max_address(dev, &native_sectors);
if (rc) {
- /* If HPA isn't going to be unlocked, skip HPA
- * resizing from the next try.
+ /* If device aborted the command or HPA isn't going to
+ * be unlocked, skip HPA resizing.
*/
- if (!ata_ignore_hpa) {
+ if (rc == -EACCES || !ata_ignore_hpa) {
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
- "broken, will skip HPA handling\n");
+ "broken, skipping HPA handling\n");
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
/* we can continue if device aborted the command */
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
if (err_mask) {
if (err_mask & AC_ERR_NODEV_HINT) {
- DPRINTK("ata%u.%d: NODEV after polling detection\n",
- ap->print_id, dev->devno);
+ ata_dev_printk(dev, KERN_DEBUG,
+ "NODEV after polling detection\n");
return -ENOENT;
}
- /* Device or controller might have reported the wrong
- * device class. Give a shot at the other IDENTIFY if
- * the current one is aborted by the device.
- */
- if (may_fallback &&
- (err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
- may_fallback = 0;
+ if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
+ /* Device or controller might have reported
+ * the wrong device class. Give a shot at the
+ * other IDENTIFY if the current one is
+ * aborted by the device.
+ */
+ if (may_fallback) {
+ may_fallback = 0;
- if (class == ATA_DEV_ATA)
- class = ATA_DEV_ATAPI;
- else
- class = ATA_DEV_ATA;
- goto retry;
+ if (class == ATA_DEV_ATA)
+ class = ATA_DEV_ATAPI;
+ else
+ class = ATA_DEV_ATA;
+ goto retry;
+ }
+
+ /* Control reaches here iff the device aborted
+ * both flavors of IDENTIFYs which happens
+ * sometimes with phantom devices.
+ */
+ ata_dev_printk(dev, KERN_DEBUG,
+ "both IDENTIFYs aborted, assuming NODEV\n");
+ return -ENOENT;
}
rc = -EIO;
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
- ata_link_for_each_dev(dev, &ap->link) {
+ ata_link_for_each_dev_reverse(dev, &ap->link) {
if (tries[dev->devno])
dev->class = classes[dev->devno];
EXPORT_SYMBOL_GPL(ata_noop_dev_select);
EXPORT_SYMBOL_GPL(ata_std_dev_select);
EXPORT_SYMBOL_GPL(sata_print_link_status);
+EXPORT_SYMBOL_GPL(atapi_cmd_type);
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
ehc->i.flags &= ~ATA_EHI_SETMODE;
}
- if (ehc->i.action & ATA_EHI_LPM)
+ if (ehc->i.action & ATA_EH_LPM)
ata_link_for_each_dev(dev, link)
ata_dev_enable_pm(dev, ap->pm_policy);
return qc;
}
+static void ata_qc_set_pc_nbytes(struct ata_queued_cmd *qc)
+{
+ struct scsi_cmnd *scmd = qc->scsicmd;
+
+ qc->extrabytes = scmd->request->extra_len;
+ qc->nbytes = scsi_bufflen(scmd) + qc->extrabytes;
+}
+
/**
* ata_dump_status - user friendly display of error info
* @id: id of the port in question
}
qc->tf.command = ATA_CMD_PACKET;
- qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
+ ata_qc_set_pc_nbytes(qc);
/* check whether ATAPI DMA is safe */
if (!using_pio && ata_check_atapi_dma(qc))
* want to set it properly, and for DMA where it is
* effectively meaningless.
*/
- nbytes = min(scmd->request->data_len, (unsigned int)63 * 1024);
+ nbytes = min(ata_qc_raw_nbytes(qc), (unsigned int)63 * 1024);
/* Most ATAPI devices which honor transfer chunk size don't
* behave according to the spec when odd chunk size which
* TODO: find out if we need to do more here to
* cover scatter/gather case.
*/
- qc->nbytes = scsi_bufflen(scmd) + scmd->request->extra_len;
+ ata_qc_set_pc_nbytes(qc);
/* request result TF and be quiet about device error */
qc->flags |= ATA_QCFLAG_RESULT_TF | ATA_QCFLAG_QUIET;
#define DRV_NAME "pata_ali"
#define DRV_VERSION "0.7.5"
+int ali_atapi_dma = 0;
+module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
+MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
+
/*
* Cable special cases
*/
}
}
+/**
+ * ali_warn_atapi_dma - Warn about ATAPI DMA disablement
+ * @adev: Device
+ *
+ * Whine about ATAPI DMA disablement if @adev is an ATAPI device.
+ * Can be used as ->dev_config.
+ */
+
+static void ali_warn_atapi_dma(struct ata_device *adev)
+{
+ struct ata_eh_context *ehc = &adev->link->eh_context;
+ int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
+
+ if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
+ ata_dev_printk(adev, KERN_WARNING,
+ "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n");
+ ata_dev_printk(adev, KERN_WARNING,
+ "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
+ }
+}
+
/**
* ali_lock_sectors - Keep older devices to 255 sector mode
* @adev: Device
static void ali_lock_sectors(struct ata_device *adev)
{
adev->max_sectors = 255;
+ ali_warn_atapi_dma(adev);
}
/**
static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
{
+ if (!ali_atapi_dma) {
+ /* FIXME: pata_ali can't do ATAPI DMA reliably but the
+ * IDE alim15x3 driver can. I tried lots of things
+ * but couldn't find what the actual difference was.
+ * If you got an idea, please write it to
+ * linux-ide@vger.kernel.org and cc htejun@gmail.com.
+ *
+ * Disable ATAPI DMA for now.
+ */
+ return -EOPNOTSUPP;
+ }
+
/* If its not a media command, its not worth it */
if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC)
return -EOPNOTSUPP;
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
+ .check_atapi_dma = ali_check_atapi_dma,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.check_status = ata_check_status,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
+ .dev_config = ali_warn_atapi_dma,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
struct it821x_dev *itdev = ap->private_data;
/* Only use dma for transfers to/from the media. */
- if (qc->nbytes < 2048)
+ if (ata_qc_raw_nbytes(qc) < 2048)
return -EOPNOTSUPP;
/* No ATAPI DMA in smart mode */
dev_dbg(&pdev->dev, "sil680: BA5_EN = %d clock = %02X\n",
tmpbyte & 1, tmpbyte & 0x30);
- *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+ *try_mmio = 0;
+#ifdef CONFIG_PPC_MERGE
+ if (machine_is(cell))
+ *try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
+#endif
switch(tmpbyte & 0x30) {
case 0x00:
void __iomem *ssr_base = NULL;
void __iomem *csr_base = NULL;
struct sata_fsl_host_priv *host_priv = NULL;
- struct resource *r;
int irq;
struct ata_host *host;
dev_printk(KERN_INFO, &ofdev->dev,
"Sata FSL Platform/CSB Driver init\n");
- r = kmalloc(sizeof(struct resource), GFP_KERNEL);
-
hcr_base = of_iomap(ofdev->node, 0);
if (!hcr_base)
goto error_exit_with_cleanup;
static struct of_device_id fsl_sata_match[] = {
{
- .compatible = "fsl,mpc8315-sata",
- },
- {
- .compatible = "fsl,mpc8379-sata",
+ .compatible = "fsl,pq-sata",
},
{},
};
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.11"
+#define DRV_VERSION "2.12"
enum {
PDC_MAX_PORTS = 4,
static void pdc_irq_clear(struct ata_port *ap);
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
static void pdc_freeze(struct ata_port *ap);
+static void pdc_sata_freeze(struct ata_port *ap);
static void pdc_thaw(struct ata_port *ap);
+static void pdc_sata_thaw(struct ata_port *ap);
static void pdc_pata_error_handler(struct ata_port *ap);
static void pdc_sata_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
- .freeze = pdc_freeze,
- .thaw = pdc_thaw,
+ .freeze = pdc_sata_freeze,
+ .thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
- .freeze = pdc_freeze,
- .thaw = pdc_thaw,
+ .freeze = pdc_sata_freeze,
+ .thaw = pdc_sata_thaw,
.error_handler = pdc_sata_error_handler,
.post_internal_cmd = pdc_post_internal_cmd,
.cable_detect = pdc_sata_cable_detect,
}
}
+static int pdc_is_sataii_tx4(unsigned long flags)
+{
+ const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
+ return (flags & mask) == mask;
+}
+
+static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
+ int is_sataii_tx4)
+{
+ static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
+ return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
+}
+
+static unsigned int pdc_sata_nr_ports(const struct ata_port *ap)
+{
+ return (ap->flags & PDC_FLAG_4_PORTS) ? 4 : 2;
+}
+
+static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap)
+{
+ const struct ata_host *host = ap->host;
+ unsigned int nr_ports = pdc_sata_nr_ports(ap);
+ unsigned int i;
+
+ for(i = 0; i < nr_ports && host->ports[i] != ap; ++i)
+ ;
+ BUG_ON(i >= nr_ports);
+ return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
+}
+
+static unsigned int pdc_sata_hotplug_offset(const struct ata_port *ap)
+{
+ return (ap->flags & PDC_FLAG_GEN_II) ? PDC2_SATA_PLUG_CSR : PDC_SATA_PLUG_CSR;
+}
+
static void pdc_freeze(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.cmd_addr;
readl(mmio + PDC_CTLSTAT); /* flush */
}
+static void pdc_sata_freeze(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
+ unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+ unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
+ u32 hotplug_status;
+
+ /* Disable hotplug events on this port.
+ *
+ * Locking:
+ * 1) hotplug register accesses must be serialised via host->lock
+ * 2) ap->lock == &ap->host->lock
+ * 3) ->freeze() and ->thaw() are called with ap->lock held
+ */
+ hotplug_status = readl(host_mmio + hotplug_offset);
+ hotplug_status |= 0x11 << (ata_no + 16);
+ writel(hotplug_status, host_mmio + hotplug_offset);
+ readl(host_mmio + hotplug_offset); /* flush */
+
+ pdc_freeze(ap);
+}
+
static void pdc_thaw(struct ata_port *ap)
{
void __iomem *mmio = ap->ioaddr.cmd_addr;
readl(mmio + PDC_CTLSTAT); /* flush */
}
+static void pdc_sata_thaw(struct ata_port *ap)
+{
+ struct ata_host *host = ap->host;
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
+ unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+ unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
+ u32 hotplug_status;
+
+ pdc_thaw(ap);
+
+ /* Enable hotplug events on this port.
+ * Locking: see pdc_sata_freeze().
+ */
+ hotplug_status = readl(host_mmio + hotplug_offset);
+ hotplug_status |= 0x11 << ata_no;
+ hotplug_status &= ~(0x11 << (ata_no + 16));
+ writel(hotplug_status, host_mmio + hotplug_offset);
+ readl(host_mmio + hotplug_offset); /* flush */
+}
+
static void pdc_common_error_handler(struct ata_port *ap, ata_reset_fn_t hardreset)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN))
readl(mmio + PDC_INT_SEQMASK);
}
-static int pdc_is_sataii_tx4(unsigned long flags)
-{
- const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
- return (flags & mask) == mask;
-}
-
-static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
- int is_sataii_tx4)
-{
- static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
- return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
-}
-
static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
mmio_base = host->iomap[PDC_MMIO_BAR];
+ spin_lock(&host->lock);
+
/* read and clear hotplug flags for all ports */
if (host->ports[0]->flags & PDC_FLAG_GEN_II)
hotplug_offset = PDC2_SATA_PLUG_CSR;
if (mask == 0xffffffff && hotplug_status == 0) {
VPRINTK("QUICK EXIT 2\n");
- return IRQ_NONE;
+ goto done_irq;
}
- spin_lock(&host->lock);
-
mask &= 0xffff; /* only 16 tags possible */
if (mask == 0 && hotplug_status == 0) {
VPRINTK("QUICK EXIT 3\n");
/* Docs are vague about this atm_hdr field. By the way, the FS
* chip makes odd errors if lower bits are set.... -- REW */
tc->atm_hdr = (vpi << 20) | (vci << 4);
+ tmc0 = 0;
{
int pcr = atm_pcr_goal (txtp);
/* eeprom routines -- see 4.7 */
-u8
-read_prom_byte(struct he_dev *he_dev, int addr)
+static u8 read_prom_byte(struct he_dev *he_dev, int addr)
{
u32 val = 0, tmp_read = 0;
int i, j = 0;
return 0;
}
-int
-idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
+static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
return idt77252_send_skb(vcc, skb, 0);
}
return 0;
}
-void
-idt77252_dev_close(struct atm_dev *dev)
+static void idt77252_dev_close(struct atm_dev *dev)
{
struct idt77252_dev *card = dev->dev_data;
u32 conf;
/***************************** IA_LIB END *****************************/
+#ifdef CONFIG_ATM_IA_DEBUG
static int tcnter = 0;
static void xdump( u_char* cp, int length, char* prefix )
{
}
} /* close xdump(... */
+#endif /* CONFIG_ATM_IA_DEBUG */
static struct atm_dev *ia_boards = NULL;
#include <linux/kdev_t.h>
#include <linux/notifier.h>
#include <linux/genhd.h>
+#include <linux/kallsyms.h>
#include <asm/semaphore.h>
#include "base.h"
if (dev_attr->show)
ret = dev_attr->show(dev, dev_attr, buf);
+ if (ret >= (ssize_t)PAGE_SIZE) {
+ print_symbol("dev_attr_show: %s returned bad count\n",
+ (unsigned long)dev_attr->show);
+ }
return ret;
}
{
va_list args;
char *name;
+ int ret;
va_start(args, fmt);
name = kvasprintf(GFP_KERNEL, fmt, args);
if (!name)
return -ENOMEM;
- return kobject_add(kobj, &drv->p->kobj, "%s", name);
+ ret = kobject_add(kobj, &drv->p->kobj, "%s", name);
+ kfree(name);
+ return ret;
}
EXPORT_SYMBOL_GPL(driver_add_kobj);
#include <scsi/sg.h>
#include <scsi/scsi_ioctl.h>
#include <linux/cdrom.h>
+#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
struct kvec iov;
sigset_t blocked, oldset;
+ if (unlikely(!sock)) {
+ printk(KERN_ERR "%s: Attempted %s on closed socket in sock_xmit\n",
+ lo->disk->disk_name, (send ? "send" : "recv"));
+ return -EINVAL;
+ }
+
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
siginitsetinv(&blocked, sigmask(SIGKILL));
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Return sense now that rq allows it (we always auto-sense anyway).
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
* -- verify the 13 conditions and do bulk resets
static void ub_cmd_build_packet(struct ub_dev *sc, struct ub_lun *lun,
struct ub_scsi_cmd *cmd, struct ub_request *urq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
-static void ub_end_rq(struct request *rq, unsigned int status);
+static void ub_end_rq(struct request *rq, unsigned int status,
+ unsigned int cmd_len);
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
struct ub_request *urq, struct ub_scsi_cmd *cmd);
static int ub_submit_scsi(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
if (atomic_read(&sc->poison)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, DID_NO_CONNECT << 16);
+ ub_end_rq(rq, DID_NO_CONNECT << 16, blk_rq_bytes(rq));
return 0;
}
if (lun->changed && !blk_pc_request(rq)) {
blkdev_dequeue_request(rq);
- ub_end_rq(rq, SAM_STAT_CHECK_CONDITION);
+ ub_end_rq(rq, SAM_STAT_CHECK_CONDITION, blk_rq_bytes(rq));
return 0;
}
drop:
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, DID_ERROR << 16);
+ ub_end_rq(rq, DID_ERROR << 16, blk_rq_bytes(rq));
return 0;
}
struct ub_request *urq = cmd->back;
struct request *rq;
unsigned int scsi_status;
+ unsigned int cmd_len;
rq = urq->rq;
rq->data_len = 0;
else
rq->data_len -= cmd->act_len;
+ scsi_status = 0;
+ } else {
+ if (cmd->act_len != cmd->len) {
+ if ((cmd->key == MEDIUM_ERROR ||
+ cmd->key == UNIT_ATTENTION) &&
+ ub_rw_cmd_retry(sc, lun, urq, cmd) == 0)
+ return;
+ scsi_status = SAM_STAT_CHECK_CONDITION;
+ } else {
+ scsi_status = 0;
+ }
}
- scsi_status = 0;
} else {
if (blk_pc_request(rq)) {
/* UB_SENSE_SIZE is smaller than SCSI_SENSE_BUFFERSIZE */
urq->rq = NULL;
+ cmd_len = cmd->len;
ub_put_cmd(lun, cmd);
- ub_end_rq(rq, scsi_status);
+ ub_end_rq(rq, scsi_status, cmd_len);
blk_start_queue(lun->disk->queue);
}
-static void ub_end_rq(struct request *rq, unsigned int scsi_status)
+static void ub_end_rq(struct request *rq, unsigned int scsi_status,
+ unsigned int cmd_len)
{
int error;
+ long rqlen;
if (scsi_status == 0) {
error = 0;
error = -EIO;
rq->errors = scsi_status;
}
- if (__blk_end_request(rq, error, blk_rq_bytes(rq)))
- BUG();
+ rqlen = blk_rq_bytes(rq); /* Oddly enough, this is the residue. */
+ if (__blk_end_request(rq, error, cmd_len)) {
+ printk(KERN_WARNING DRV_NAME
+ ": __blk_end_request blew, %s-cmd total %u rqlen %ld\n",
+ blk_pc_request(rq)? "pc": "fs", cmd_len, rqlen);
+ }
}
static int ub_rw_cmd_retry(struct ub_dev *sc, struct ub_lun *lun,
enum {
PARTITION_SHIFT = 3,
MAX_DISKNO = HVMAXARCHITECTEDVIRTUALDISKS,
- MAX_DISK_NAME = sizeof(((struct gendisk *)0)->disk_name)
+ MAX_DISK_NAME = FIELD_SIZEOF(struct gendisk, disk_name)
};
static DEFINE_SPINLOCK(viodasd_spinlock);
} else {
address = gart_info->addr;
bus_address = gart_info->bus_addr;
- DRM_DEBUG("PCI: Gart Table: VRAM %08X mapped at %08lX\n",
- bus_address, (unsigned long)address);
+ DRM_DEBUG("PCI: Gart Table: VRAM %08LX mapped at %08lX\n",
+ (unsigned long long)bus_address,
+ (unsigned long)address);
}
pci_gart = (u32 *) address;
}
}
+ if (gart_info->gart_table_location == DRM_ATI_GART_MAIN)
+ dma_sync_single_for_device(&dev->pdev->dev,
+ bus_address,
+ max_pages * sizeof(u32),
+ PCI_DMA_TODEVICE);
+
ret = 1;
#if defined(__i386__) || defined(__x86_64__)
#define DEBUG_SCATTER 0
+static inline void *drm_vmalloc_dma(unsigned long size)
+{
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+ return __vmalloc(size, GFP_KERNEL, PAGE_KERNEL | _PAGE_NO_CACHE);
+#else
+ return vmalloc_32(size);
+#endif
+}
+
void drm_sg_cleanup(struct drm_sg_mem * entry)
{
struct page *page;
}
memset((void *)entry->busaddr, 0, pages * sizeof(*entry->busaddr));
- entry->virtual = vmalloc_32(pages << PAGE_SHIFT);
+ entry->virtual = drm_vmalloc_dma(pages << PAGE_SHIFT);
if (!entry->virtual) {
drm_free(entry->busaddr,
entry->pages * sizeof(*entry->busaddr), DRM_MEM_PAGES);
pgprot_val(tmp) |= _PAGE_NO_CACHE;
if (map_type == _DRM_REGISTERS)
pgprot_val(tmp) |= _PAGE_GUARDED;
-#endif
-#if defined(__ia64__)
+#elif defined(__ia64__)
if (efi_range_is_wc(vma->vm_start, vma->vm_end -
vma->vm_start))
tmp = pgprot_writecombine(tmp);
else
tmp = pgprot_noncached(tmp);
+#elif defined(__sparc__)
+ tmp = pgprot_noncached(tmp);
+#endif
+ return tmp;
+}
+
+static pgprot_t drm_dma_prot(uint32_t map_type, struct vm_area_struct *vma)
+{
+ pgprot_t tmp = vm_get_page_prot(vma->vm_flags);
+
+#if defined(__powerpc__) && defined(CONFIG_NOT_COHERENT_CACHE)
+ tmp |= _PAGE_NO_CACHE;
#endif
return tmp;
}
offset = dev->driver->get_reg_ofs(dev);
vma->vm_flags |= VM_IO; /* not in core dump */
vma->vm_page_prot = drm_io_prot(map->type, vma);
-#ifdef __sparc__
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-#endif
if (io_remap_pfn_range(vma, vma->vm_start,
(map->offset + offset) >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
page_to_pfn(virt_to_page(map->handle)),
vma->vm_end - vma->vm_start, vma->vm_page_prot))
return -EAGAIN;
+ vma->vm_page_prot = drm_dma_prot(map->type, vma);
/* fall through to _DRM_SHM */
case _DRM_SHM:
vma->vm_ops = &drm_vm_shm_ops;
/* Don't let this area swap. Change when
DRM_KERNEL advisory is supported. */
vma->vm_flags |= VM_RESERVED;
+ vma->vm_page_prot = drm_dma_prot(map->type, vma);
break;
case _DRM_SCATTER_GATHER:
vma->vm_ops = &drm_vm_sg_ops;
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ if (!dev_priv)
+ return;
+
if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
#define IS_I915G(dev) ((dev)->pci_device == 0x2582 || (dev)->pci_device == 0x258a)
#define IS_I915GM(dev) ((dev)->pci_device == 0x2592)
#define IS_I945G(dev) ((dev)->pci_device == 0x2772)
-#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2)
-
+#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2 ||\
+ (dev)->pci_device == 0x27AE)
#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \
(dev)->pci_device == 0x2982 || \
(dev)->pci_device == 0x2992 || \
buf->used = 0;
}
+static void r300_cmd_wait(drm_radeon_private_t * dev_priv,
+ drm_r300_cmd_header_t header)
+{
+ u32 wait_until;
+ RING_LOCALS;
+
+ if (!header.wait.flags)
+ return;
+
+ wait_until = 0;
+
+ switch(header.wait.flags) {
+ case R300_WAIT_2D:
+ wait_until = RADEON_WAIT_2D_IDLE;
+ break;
+ case R300_WAIT_3D:
+ wait_until = RADEON_WAIT_3D_IDLE;
+ break;
+ case R300_NEW_WAIT_2D_3D:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_3D_IDLE;
+ break;
+ case R300_NEW_WAIT_2D_2D_CLEAN:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+ break;
+ case R300_NEW_WAIT_3D_3D_CLEAN:
+ wait_until = RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+ break;
+ case R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN:
+ wait_until = RADEON_WAIT_2D_IDLE|RADEON_WAIT_2D_IDLECLEAN;
+ wait_until |= RADEON_WAIT_3D_IDLE|RADEON_WAIT_3D_IDLECLEAN;
+ break;
+ default:
+ return;
+ }
+
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(wait_until);
+ ADVANCE_RING();
+}
+
static int r300_scratch(drm_radeon_private_t *dev_priv,
drm_radeon_kcmd_buffer_t *cmdbuf,
drm_r300_cmd_header_t header)
break;
case R300_CMD_WAIT:
- /* simple enough, we can do it here */
DRM_DEBUG("R300_CMD_WAIT\n");
- if (header.wait.flags == 0)
- break; /* nothing to do */
-
- {
- RING_LOCALS;
-
- BEGIN_RING(2);
- OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
- OUT_RING((header.wait.flags & 0xf) << 14);
- ADVANCE_RING();
- }
+ r300_cmd_wait(dev_priv, header);
break;
case R300_CMD_SCRATCH:
#define R300_CMD_WAIT 7
# define R300_WAIT_2D 0x1
# define R300_WAIT_3D 0x2
+/* these two defines are DOING IT WRONG - however
+ * we have userspace which relies on using these.
+ * The wait interface is backwards compat new
+ * code should use the NEW_WAIT defines below
+ * THESE ARE NOT BIT FIELDS
+ */
# define R300_WAIT_2D_CLEAN 0x3
# define R300_WAIT_3D_CLEAN 0x4
+
+# define R300_NEW_WAIT_2D_3D 0x3
+# define R300_NEW_WAIT_2D_2D_CLEAN 0x4
+# define R300_NEW_WAIT_3D_3D_CLEAN 0x6
+# define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8
+
#define R300_CMD_SCRATCH 8
typedef union {
list_for_each(p, heap) {
int start = (p->start + mask) & ~mask;
- if (p->file_priv == 0 && start + size <= p->start + p->size)
+ if (p->file_priv == NULL && start + size <= p->start + p->size)
return split_block(p, start, size, file_priv);
}
/* Assumes a single contiguous range. Needs a special file_priv in
* 'heap' to stop it being subsumed.
*/
- if (p->next->file_priv == 0) {
+ if (p->next->file_priv == NULL) {
struct mem_block *q = p->next;
p->size += q->size;
p->next = q->next;
drm_free(q, sizeof(*q), DRM_MEM_BUFS);
}
- if (p->prev->file_priv == 0) {
+ if (p->prev->file_priv == NULL) {
struct mem_block *q = p->prev;
q->size += p->size;
q->next = p->next;
* 'heap' to stop it being subsumed.
*/
list_for_each(p, heap) {
- while (p->file_priv == 0 && p->next->file_priv == 0) {
+ while (p->file_priv == NULL && p->next->file_priv == NULL) {
struct mem_block *q = p->next;
p->size += q->size;
p->next = q->next;
int hpet_alloc(struct hpet_data *hdp)
{
- u64 cap, mcfg, hpet_config;
+ u64 cap, mcfg;
struct hpet_dev *devp;
- u32 i, ntimer, irq;
+ u32 i, ntimer;
struct hpets *hpetp;
size_t siz;
struct hpet __iomem *hpet;
static struct hpets *last = NULL;
- unsigned long period, irq_bitmap;
+ unsigned long period;
unsigned long long temp;
/*
hpetp->hp_hpet_phys = hdp->hd_phys_address;
hpetp->hp_ntimer = hdp->hd_nirqs;
- hpet = hpetp->hp_hpet;
-
- /* Assign IRQs statically for legacy devices */
- hpetp->hp_dev[0].hd_hdwirq = hdp->hd_irq[0];
- hpetp->hp_dev[1].hd_hdwirq = hdp->hd_irq[1];
-
- /* Assign IRQs dynamically for the others */
- for (i = 2, devp = &hpetp->hp_dev[2]; i < hdp->hd_nirqs; i++, devp++) {
- struct hpet_timer __iomem *timer;
- timer = &hpet->hpet_timers[devp - hpetp->hp_dev];
+ for (i = 0; i < hdp->hd_nirqs; i++)
+ hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
- /* Check if there's already an IRQ assigned to the timer */
- if (hdp->hd_irq[i]) {
- hpetp->hp_dev[i].hd_hdwirq = hdp->hd_irq[i];
- continue;
- }
-
- hpet_config = readq(&timer->hpet_config);
- irq_bitmap = (hpet_config & Tn_INT_ROUTE_CAP_MASK)
- >> Tn_INT_ROUTE_CAP_SHIFT;
- if (!irq_bitmap)
- irq = 0; /* No valid IRQ Assignable */
- else {
- irq = find_first_bit(&irq_bitmap, 32);
- do {
- hpet_config |= irq << Tn_INT_ROUTE_CNF_SHIFT;
- writeq(hpet_config, &timer->hpet_config);
-
- /*
- * Verify whether we have written a valid
- * IRQ number by reading it back again
- */
- hpet_config = readq(&timer->hpet_config);
- if (irq == (hpet_config & Tn_INT_ROUTE_CNF_MASK)
- >> Tn_INT_ROUTE_CNF_SHIFT)
- break; /* Success */
- } while ((irq = (find_next_bit(&irq_bitmap, 32, irq))));
- }
- hpetp->hp_dev[i].hd_hdwirq = irq;
- }
+ hpet = hpetp->hp_hpet;
cap = readq(&hpet->hpet_cap);
hpetp->hp_which, hdp->hd_phys_address,
hpetp->hp_ntimer > 1 ? "s" : "");
for (i = 0; i < hpetp->hp_ntimer; i++)
- printk("%s %d", i > 0 ? "," : "",
- hpetp->hp_dev[i].hd_hdwirq);
+ printk("%s %d", i > 0 ? "," : "", hdp->hd_irq[i]);
printk("\n");
printk(KERN_INFO "hpet%u: %u %d-bit timers, %Lu Hz\n",
for (rest = cnt; rest > 0; rest -= nlen) {
nlen = (rest > 16) ? 16 : rest;
memcpy(kb, buf, nlen);
- beat_put_term_char(vtermno, rest, kb[0], kb[1]);
- rest -= nlen;
+ beat_put_term_char(vtermno, nlen, kb[0], kb[1]);
+ buf += nlen;
}
return cnt;
}
Hardware Random Number Generator Core infrastructure.
To compile this driver as a module, choose M here: the
- module will be called rng-core.
+ module will be called rng-core. This provides a device
+ that's usually called /dev/hw_random, and which exposes one
+ of possibly several hardware random number generators.
+
+ These hardware random number generators do not feed directly
+ into the kernel's random number generator. That is usually
+ handled by the "rngd" daemon. Documentation/hw_random.txt
+ has more information.
If unsure, say Y.
// Normal Expected path - We still hold LOCK
break; /* from for()- Enough room: goto proceed */
}
- }
-
- ip2trace (CHANN, ITRC_QUEUE, 3, 1, totalsize );
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
+ WRITE_UNLOCK_IRQRESTORE(lock_var_p, flags);
+ } else
+ ip2trace(CHANN, ITRC_QUEUE, 3, 1, totalsize);
- // Prepare to wait for buffers to empty
- WRITE_UNLOCK_IRQRESTORE(lock_var_p,flags);
+ /* Prepare to wait for buffers to empty */
serviceOutgoingFifo(pB); // Dump what we got
if (timeout == 0) {
default: // Neither packet? should be impossible
ip2trace (ITRC_NO_PORT, ITRC_SFIFO, 5, 1,
PTYPE_OF(pB->i2eLeadoffWord) );
+ WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock,
+ bflags);
break;
} // End of switch on type of packets
return retval;
}
-extern ssize_t redirected_tty_write(struct file *, const char *,
+extern ssize_t redirected_tty_write(struct file *, const char __user *,
size_t, loff_t *);
/**
u32 size_bytes)
{
u32 i = 0;
- const u32 *ptr = (__force u32 *) mem_addr_start;
+ const u32 __iomem *ptr = mem_addr_start;
u16 *buf16;
if (unlikely(!ptr || !buf))
switch (size_bytes) {
case 2: /* 2 bytes */
buf16 = (u16 *) buf;
- *buf16 = __le16_to_cpu(readw((void __iomem *)ptr));
+ *buf16 = __le16_to_cpu(readw(ptr));
goto out;
break;
case 4: /* 4 bytes */
- *(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+ *(buf) = __le32_to_cpu(readl(ptr));
goto out;
break;
}
if (size_bytes - i == 2) {
/* Handle 2 bytes in the end */
buf16 = (u16 *) buf;
- *(buf16) = __le16_to_cpu(readw((void __iomem *)ptr));
+ *(buf16) = __le16_to_cpu(readw(ptr));
i += 2;
} else {
/* Read 4 bytes */
- *(buf) = __le32_to_cpu(readl((void __iomem *)ptr));
+ *(buf) = __le32_to_cpu(readl(ptr));
i += 4;
}
buf++;
u32 size_bytes)
{
u32 i = 0;
- u32 *ptr = (__force u32 *) mem_addr_start;
+ u32 __iomem *ptr = mem_addr_start;
const u16 *buf16;
if (unlikely(!ptr || !buf))
switch (size_bytes) {
case 2: /* 2 bytes */
buf16 = (const u16 *)buf;
- writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+ writew(__cpu_to_le16(*buf16), ptr);
return 2;
break;
case 1: /*
* so falling through..
*/
case 4: /* 4 bytes */
- writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+ writel(__cpu_to_le32(*buf), ptr);
return 4;
break;
}
if (size_bytes - i == 2) {
/* 2 bytes */
buf16 = (const u16 *)buf;
- writew(__cpu_to_le16(*buf16), (void __iomem *)ptr);
+ writew(__cpu_to_le16(*buf16), ptr);
i += 2;
} else {
/* 4 bytes */
- writel(__cpu_to_le32(*buf), (void __iomem *)ptr);
+ writel(__cpu_to_le32(*buf), ptr);
i += 4;
}
buf++;
MapP = &p->RIOConnectTable[Next++];
MapP->HostUniqueNum = HostP->UniqueNum;
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
+ if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
+ rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
continue;
+ }
MapP->RtaUniqueNum = 0;
MapP->ID = 0;
MapP->Flags = SLOT_IN_USE;
PortP->State |= RIO_WOPEN;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
** ACTION: verify that this is a good thing
** to do here. -- ???
func_exit();
return -EINTR;
}
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
}
PortP->State &= ~RIO_WOPEN;
}
if (RIOShortCommand(p, PortP, CLOSE, 1, 0) == RIO_FAIL) {
RIOPreemptiveCmd(p, PortP, FCLOSE);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
if (p->RIOHalted) {
RIOClearUp(PortP);
+ rio_spin_lock_irqsave(&PortP->portSem, flags);
goto close_end;
}
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
/**
* buffer_icap_get_status - Get the contents of the status register.
- * @base_address: is the base address of the device
+ * @drvdata: a pointer to the drvdata.
*
* The status register contains the ICAP status and the done bit.
*
* D1 - Always 1
* D0 - Done bit
**/
-static inline u32 buffer_icap_get_status(void __iomem *base_address)
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata)
{
- return in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return in_be32(drvdata->base_address + XHI_STATUS_REG_OFFSET);
}
/**
**/
static inline bool buffer_icap_busy(void __iomem *base_address)
{
- return (buffer_icap_get_status(base_address) & 1) == XHI_NOT_FINISHED;
-}
-
-/**
- * buffer_icap_busy - Return true if the icap device is not busy
- * @base_address: is the base address of the device
- *
- * The queries the low order bit of the status register, which
- * indicates whether the current configuration or readback operation
- * has completed.
- **/
-static inline bool buffer_icap_done(void __iomem *base_address)
-{
- return (buffer_icap_get_status(base_address) & 1) == XHI_FINISHED;
+ u32 status = in_be32(base_address + XHI_STATUS_REG_OFFSET);
+ return (status & 1) == XHI_NOT_FINISHED;
}
/**
#include <asm/io.h>
#include "xilinx_hwicap.h"
-void buffer_icap_reset(struct hwicap_drvdata *drvdata);
-
/* Loads a partial bitstream from system memory. */
int buffer_icap_set_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
int buffer_icap_get_configuration(struct hwicap_drvdata *drvdata, u32 *data,
u32 Size);
+u32 buffer_icap_get_status(struct hwicap_drvdata *drvdata);
+void buffer_icap_reset(struct hwicap_drvdata *drvdata);
+
#endif
#define XHI_CR_READ_MASK 0x00000002 /* Read from ICAP to FIFO */
#define XHI_CR_WRITE_MASK 0x00000001 /* Write from FIFO to ICAP */
-/* Status Register (SR) */
-#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
-#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
-#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
-#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
-#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
-
#define XHI_WFO_MAX_VACANCY 1024 /* Max Write FIFO Vacancy, in words */
#define XHI_RFO_MAX_OCCUPANCY 256 /* Max Read FIFO Occupancy, in words */
dev_dbg(drvdata->dev, "readback started\n");
}
+/**
+ * fifo_icap_get_status - Get the contents of the status register.
+ * @drvdata: a pointer to the drvdata.
+ *
+ * The status register contains the ICAP status and the done bit.
+ *
+ * D8 - cfgerr
+ * D7 - dalign
+ * D6 - rip
+ * D5 - in_abort_l
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - Done bit
+ **/
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata)
+{
+ u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
+ dev_dbg(drvdata->dev, "Getting status = %x\n", status);
+ return status;
+}
+
/**
* fifo_icap_busy - Return true if the ICAP is still processing a transaction.
* @drvdata: a pointer to the drvdata.
static inline u32 fifo_icap_busy(struct hwicap_drvdata *drvdata)
{
u32 status = in_be32(drvdata->base_address + XHI_SR_OFFSET);
- dev_dbg(drvdata->dev, "Getting status = %x\n", status);
return (status & XHI_SR_DONE_MASK) ? 0 : 1;
}
u32 *FrameBuffer,
u32 NumWords);
+u32 fifo_icap_get_status(struct hwicap_drvdata *drvdata);
void fifo_icap_reset(struct hwicap_drvdata *drvdata);
void fifo_icap_flush_fifo(struct hwicap_drvdata *drvdata);
*****************************************************************************/
/*
- * This is the code behind /dev/xilinx_icap -- it allows a user-space
+ * This is the code behind /dev/icap* -- it allows a user-space
* application to use the Xilinx ICAP subsystem.
*
* The following operations are possible:
* user-space application code that uses this device. The simplest
* way to use this interface is simply:
*
- * cp foo.bit /dev/xilinx_icap
+ * cp foo.bit /dev/icap0
*
* Note that unless foo.bit is an appropriately constructed partial
* bitstream, this has a high likelyhood of overwriting the design
#include "buffer_icap.h"
#include "fifo_icap.h"
-#define DRIVER_NAME "xilinx_icap"
+#define DRIVER_NAME "icap"
#define HWICAP_REGS (0x10000)
-/* dynamically allocate device number */
-static int xhwicap_major;
-static int xhwicap_minor;
+#define XHWICAP_MAJOR 259
+#define XHWICAP_MINOR 0
#define HWICAP_DEVICES 1
-module_param(xhwicap_major, int, S_IRUGO);
-module_param(xhwicap_minor, int, S_IRUGO);
-
/* An array, which is set to true when the device is registered. */
static bool probed_devices[HWICAP_DEVICES];
static struct mutex icap_sem;
* Create the data to be written to the ICAP.
*/
buffer[index++] = XHI_DUMMY_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_SYNC_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
+ buffer[index++] = XHI_NOOP_PACKET;
+
+ /*
+ * Write the data to the FIFO and initiate the transfer of data present
+ * in the FIFO to the ICAP device.
+ */
+ status = drvdata->config->set_configuration(drvdata,
+ &buffer[0], index);
+ if (status)
+ return status;
+
+ /* If the syncword was not found, then we need to start over. */
+ status = drvdata->config->get_status(drvdata);
+ if ((status & XHI_SR_DALIGN_MASK) != XHI_SR_DALIGN_MASK)
+ return -EIO;
+
+ index = 0;
buffer[index++] = hwicap_type_1_read(reg) | 1;
buffer[index++] = XHI_NOOP_PACKET;
buffer[index++] = XHI_NOOP_PACKET;
probed_devices[id] = 1;
mutex_unlock(&icap_sem);
- devt = MKDEV(xhwicap_major, xhwicap_minor + id);
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR + id);
drvdata = kzalloc(sizeof(struct hwicap_drvdata), GFP_KERNEL);
if (!drvdata) {
static struct hwicap_driver_config buffer_icap_config = {
.get_configuration = buffer_icap_get_configuration,
.set_configuration = buffer_icap_set_configuration,
+ .get_status = buffer_icap_get_status,
.reset = buffer_icap_reset,
};
static struct hwicap_driver_config fifo_icap_config = {
.get_configuration = fifo_icap_get_configuration,
.set_configuration = fifo_icap_set_configuration,
+ .get_status = fifo_icap_get_status,
.reset = fifo_icap_reset,
};
dev_set_drvdata(dev, NULL);
mutex_lock(&icap_sem);
- probed_devices[MINOR(dev->devt)-xhwicap_minor] = 0;
+ probed_devices[MINOR(dev->devt)-XHWICAP_MINOR] = 0;
mutex_unlock(&icap_sem);
return 0; /* success */
}
icap_class = class_create(THIS_MODULE, "xilinx_config");
mutex_init(&icap_sem);
- if (xhwicap_major) {
- devt = MKDEV(xhwicap_major, xhwicap_minor);
- retval = register_chrdev_region(
- devt,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- } else {
- retval = alloc_chrdev_region(&devt,
- xhwicap_minor,
- HWICAP_DEVICES,
- DRIVER_NAME);
- if (retval < 0)
- return retval;
- xhwicap_major = MAJOR(devt);
- }
+ devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
+ retval = register_chrdev_region(devt,
+ HWICAP_DEVICES,
+ DRIVER_NAME);
+ if (retval < 0)
+ return retval;
retval = platform_driver_register(&hwicap_platform_driver);
static void __exit hwicap_module_cleanup(void)
{
- dev_t devt = MKDEV(xhwicap_major, xhwicap_minor);
+ dev_t devt = MKDEV(XHWICAP_MAJOR, XHWICAP_MINOR);
class_destroy(icap_class);
};
struct hwicap_driver_config {
+ /* Read configuration data given by size into the data buffer.
+ Return 0 if successful. */
int (*get_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Write configuration data given by size from the data buffer.
+ Return 0 if successful. */
int (*set_configuration)(struct hwicap_drvdata *drvdata, u32 *data,
u32 size);
+ /* Get the status register, bit pattern given by:
+ * D8 - 0 = configuration error
+ * D7 - 1 = alignment found
+ * D6 - 1 = readback in progress
+ * D5 - 0 = abort in progress
+ * D4 - Always 1
+ * D3 - Always 1
+ * D2 - Always 1
+ * D1 - Always 1
+ * D0 - 1 = operation completed
+ */
+ u32 (*get_status)(struct hwicap_drvdata *drvdata);
+ /* Reset the hw */
void (*reset)(struct hwicap_drvdata *drvdata);
};
/* Constant to use for CRC check when CRC has been disabled */
#define XHI_DISABLED_AUTO_CRC 0x0000DEFCUL
+/* Meanings of the bits returned by get_status */
+#define XHI_SR_CFGERR_N_MASK 0x00000100 /* Config Error Mask */
+#define XHI_SR_DALIGN_MASK 0x00000080 /* Data Alignment Mask */
+#define XHI_SR_RIP_MASK 0x00000040 /* Read back Mask */
+#define XHI_SR_IN_ABORT_N_MASK 0x00000020 /* Select Map Abort Mask */
+#define XHI_SR_DONE_MASK 0x00000001 /* Done bit Mask */
+
/**
* hwicap_type_1_read - Generates a Type 1 read packet header.
* @reg: is the address of the register to be read back.
dev->nls = nls;
- dev->cn_queue = create_workqueue(dev->name);
+ dev->cn_queue = create_singlethread_workqueue(dev->name);
if (!dev->cn_queue) {
kfree(dev);
return NULL;
/* enter the state and update stats */
dev->last_residency = target_state->enter(dev, target_state);
dev->last_state = target_state;
- target_state->time += dev->last_residency;
+ target_state->time += (unsigned long long)dev->last_residency;
target_state->usage++;
/* give the governor an opportunity to reflect on the outcome */
state->exit_latency = 0;
state->target_residency = 0;
state->power_usage = -1;
- state->flags = CPUIDLE_FLAG_POLL | CPUIDLE_FLAG_TIME_VALID;
+ state->flags = CPUIDLE_FLAG_POLL;
state->enter = poll_idle;
}
#else
return sprintf(buf, "%u\n", state->_name);\
}
+#define define_show_state_ull_function(_name) \
+static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
+{ \
+ return sprintf(buf, "%llu\n", state->_name);\
+}
+
#define define_show_state_str_function(_name) \
static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
{ \
define_show_state_function(exit_latency)
define_show_state_function(power_usage)
-define_show_state_function(usage)
-define_show_state_function(time)
+define_show_state_ull_function(usage)
+define_show_state_ull_function(time)
define_show_state_str_function(name)
define_show_state_str_function(desc)
struct hifn_desc
{
- volatile u32 l;
- volatile u32 p;
+ volatile __le32 l;
+ volatile __le32 p;
};
struct hifn_dma {
struct hifn_base_command
{
- volatile u16 masks;
- volatile u16 session_num;
- volatile u16 total_source_count;
- volatile u16 total_dest_count;
+ volatile __le16 masks;
+ volatile __le16 session_num;
+ volatile __le16 total_source_count;
+ volatile __le16 total_dest_count;
};
#define HIFN_BASE_CMD_COMP 0x0100 /* enable compression engine */
*/
struct hifn_crypt_command
{
- volatile u16 masks;
- volatile u16 header_skip;
- volatile u16 source_count;
- volatile u16 reserved;
+ volatile __le16 masks;
+ volatile __le16 header_skip;
+ volatile __le16 source_count;
+ volatile __le16 reserved;
};
#define HIFN_CRYPT_CMD_ALG_MASK 0x0003 /* algorithm: */
{
u32 ret;
- ret = readl((char *)(dev->bar[0]) + reg);
+ ret = readl(dev->bar[0] + reg);
return ret;
}
{
u32 ret;
- ret = readl((char *)(dev->bar[1]) + reg);
+ ret = readl(dev->bar[1] + reg);
return ret;
}
static inline void hifn_write_0(struct hifn_device *dev, u32 reg, u32 val)
{
- writel(val, (char *)(dev->bar[0]) + reg);
+ writel(val, dev->bar[0] + reg);
}
static inline void hifn_write_1(struct hifn_device *dev, u32 reg, u32 val)
{
- writel(val, (char *)(dev->bar[1]) + reg);
+ writel(val, dev->bar[1] + reg);
}
static void hifn_wait_puc(struct hifn_device *dev)
static struct of_device_id of_fsl_dma_chan_ids[] = {
{
- .compatible = "fsl,mpc8540-dma-channel",
+ .compatible = "fsl,eloplus-dma-channel",
.data = (void *)&mpc8540_dma_ip_feature,
},
{
- .compatible = "fsl,mpc8349-dma-channel",
+ .compatible = "fsl,elo-dma-channel",
.data = (void *)&mpc8349_dma_ip_feature,
},
{}
}
static struct of_device_id of_fsl_dma_ids[] = {
- { .compatible = "fsl,mpc8540-dma", },
- { .compatible = "fsl,mpc8349-dma", },
+ { .compatible = "fsl,eloplus-dma", },
+ { .compatible = "fsl,elo-dma", },
{}
};
#define FSL_DMA_DGSR_EOSI 0x02
#define FSL_DMA_DGSR_EOLSI 0x01
+typedef u64 __bitwise v64;
+typedef u32 __bitwise v32;
+
struct fsl_dma_ld_hw {
- u64 __bitwise src_addr;
- u64 __bitwise dst_addr;
- u64 __bitwise next_ln_addr;
- u32 __bitwise count;
- u32 __bitwise reserve;
+ v64 src_addr;
+ v64 dst_addr;
+ v64 next_ln_addr;
+ v32 count;
+ v32 reserve;
} __attribute__((aligned(32)));
struct fsl_desc_sw {
} __attribute__((aligned(32)));
struct fsl_dma_chan_regs {
- u32 __bitwise mr; /* 0x00 - Mode Register */
- u32 __bitwise sr; /* 0x04 - Status Register */
- u64 __bitwise cdar; /* 0x08 - Current descriptor address register */
- u64 __bitwise sar; /* 0x10 - Source Address Register */
- u64 __bitwise dar; /* 0x18 - Destination Address Register */
- u32 __bitwise bcr; /* 0x20 - Byte Count Register */
- u64 __bitwise ndar; /* 0x24 - Next Descriptor Address Register */
+ u32 mr; /* 0x00 - Mode Register */
+ u32 sr; /* 0x04 - Status Register */
+ u64 cdar; /* 0x08 - Current descriptor address register */
+ u64 sar; /* 0x10 - Source Address Register */
+ u64 dar; /* 0x18 - Destination Address Register */
+ u32 bcr; /* 0x20 - Byte Count Register */
+ u64 ndar; /* 0x24 - Next Descriptor Address Register */
};
struct fsl_dma_chan;
#ifndef __powerpc64__
static u64 in_be64(const u64 __iomem *addr)
{
- return ((u64)in_be32((u32 *)addr) << 32) | (in_be32((u32 *)addr + 1));
+ return ((u64)in_be32((u32 __iomem *)addr) << 32) |
+ (in_be32((u32 __iomem *)addr + 1));
}
static void out_be64(u64 __iomem *addr, u64 val)
{
- out_be32((u32 *)addr, val >> 32);
- out_be32((u32 *)addr + 1, (u32)val);
+ out_be32((u32 __iomem *)addr, val >> 32);
+ out_be32((u32 __iomem *)addr + 1, (u32)val);
}
/* There is no asm instructions for 64 bits reverse loads and stores */
static u64 in_le64(const u64 __iomem *addr)
{
- return ((u64)in_le32((u32 *)addr + 1) << 32) | (in_le32((u32 *)addr));
+ return ((u64)in_le32((u32 __iomem *)addr + 1) << 32) |
+ (in_le32((u32 __iomem *)addr));
}
static void out_le64(u64 __iomem *addr, u64 val)
{
- out_le32((u32 *)addr + 1, val >> 32);
- out_le32((u32 *)addr, (u32)val);
+ out_le32((u32 __iomem *)addr + 1, val >> 32);
+ out_le32((u32 __iomem *)addr, (u32)val);
}
#endif
#define DMA_TO_CPU(fsl_chan, d, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- be##width##_to_cpu(d) : le##width##_to_cpu(d))
+ be##width##_to_cpu((__force __be##width)(v##width)d) : \
+ le##width##_to_cpu((__force __le##width)(v##width)d))
#define CPU_TO_DMA(fsl_chan, c, width) \
(((fsl_chan)->feature & FSL_DMA_BIG_ENDIAN) ? \
- cpu_to_be##width(c) : cpu_to_le##width(c))
+ (__force v##width)cpu_to_be##width(c) : \
+ (__force v##width)cpu_to_le##width(c))
#endif /* __DMA_FSLDMA_H */
struct ioat_dca_priv {
void __iomem *iobase;
- void *dca_base;
+ void __iomem *dca_base;
int max_requesters;
int requester_count;
u8 tag_map[IOAT_TAG_MAP_LEN];
.get_tag = ioat2_dca_get_tag,
};
-static int ioat2_dca_count_dca_slots(void *iobase, u16 dca_offset)
+static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
{
int slots = 0;
u32 req;
if (d->res_count == 0) {
size_t size, rest, offset;
- dma_addr_t buffer_bus;
+ dma_addr_t start_bus;
+ void *start;
/*
* This descriptor is finished and we may have a
*/
offset = offsetof(struct ar_buffer, data);
- buffer_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
+ start = buffer = ab;
+ start_bus = le32_to_cpu(ab->descriptor.data_address) - offset;
- buffer = ab;
ab = ab->next;
d = &ab->descriptor;
size = buffer + PAGE_SIZE - ctx->pointer;
buffer = handle_ar_packet(ctx, buffer);
dma_free_coherent(ohci->card.device, PAGE_SIZE,
- buffer, buffer_bus);
+ start, start_bus);
ar_context_add_page(ctx);
} else {
buffer = ctx->pointer;
dev->name = "IPMI controller";
dev->device_data = data;
- list_add(&dev->list, &dmi_devices);
+ list_add_tail(&dev->list, &dmi_devices);
}
static void __init dmi_save_extended_devices(const struct dmi_header *dm)
/* Reserve the ISA region */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, W83781D_EXTENT, "w83781d")) {
+ if (!request_region(res->start + W83781D_ADDR_REG_OFFSET, 2,
+ "w83781d")) {
err = -EBUSY;
goto exit;
}
device_remove_file(&pdev->dev, &dev_attr_name);
kfree(data);
exit_release_region:
- release_region(res->start, W83781D_EXTENT);
+ release_region(res->start + W83781D_ADDR_REG_OFFSET, 2);
exit:
return err;
}
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group);
sysfs_remove_group(&pdev->dev.kobj, &w83781d_group_opt);
device_remove_file(&pdev->dev, &dev_attr_name);
- release_region(data->client.addr, W83781D_EXTENT);
+ release_region(data->client.addr + W83781D_ADDR_REG_OFFSET, 2);
kfree(data);
return 0;
{
int val, save, found = 0;
- if (!request_region(address, W83781D_EXTENT, "w83781d"))
+ /* We have to request the region in two parts because some
+ boards declare base+4 to base+7 as a PNP device */
+ if (!request_region(address, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request low part of region\n");
return 0;
+ }
+ if (!request_region(address + 4, 4, "w83781d")) {
+ pr_debug("w83781d: Failed to request high part of region\n");
+ release_region(address, 4);
+ return 0;
+ }
#define REALLY_SLOW_IO
/* We need the timeouts for at least some W83781D-like
val == 0x30 ? "W83782D" : "W83781D", (int)address);
release:
- release_region(address, W83781D_EXTENT);
+ release_region(address + 4, 4);
+ release_region(address, 4);
return found;
}
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537 || BF54x
+ depends on BF534 || BF536 || BF537
help
This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
break;
case DAVINCI_I2C_IVR_ARDY:
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_STR_ARDY, 1);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY);
complete(&dev->cmd_complete);
break;
if (dev->buf_len)
continue;
- w = davinci_i2c_read_reg(dev,
- DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_IMR_RRDY, 0);
davinci_i2c_write_reg(dev,
- DAVINCI_I2C_STR_REG,
- w);
+ DAVINCI_I2C_STR_REG,
+ DAVINCI_I2C_IMR_RRDY);
} else
dev_err(dev->dev, "RDR IRQ while no "
"data requested\n");
break;
case DAVINCI_I2C_IVR_SCD:
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG);
- MOD_REG_BIT(w, DAVINCI_I2C_STR_SCD, 1);
- davinci_i2c_write_reg(dev, DAVINCI_I2C_STR_REG, w);
+ davinci_i2c_write_reg(dev,
+ DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD);
complete(&dev->cmd_complete);
break;
static int iic_force_fast;
module_param(iic_force_fast, bool, 0);
-MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
#define DBG_LEVEL 0
size_t buf_len;
struct i2c_adapter adapter;
unsigned rev1:1;
+ unsigned idle:1;
+ u16 iestate; /* Saved interrupt register */
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
}
}
-static void omap_i2c_enable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (dev->iestate)
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ dev->idle = 0;
}
-static void omap_i2c_disable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
+ u16 iv;
+
+ dev->idle = 1;
+ dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+ if (dev->rev1)
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ else
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
+ clk_disable(dev->fclk);
if (dev->iclk != NULL)
clk_disable(dev->iclk);
- clk_disable(dev->fclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
int i;
int r;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if ((r = omap_i2c_wait_for_bb(dev)) < 0)
goto out;
if (r == 0)
r = num;
out:
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return r;
}
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
+ if (dev->idle)
+ return IRQ_NONE;
+
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
switch (iv) {
case 0x00: /* None */
u16 stat, w;
int count = 0;
+ if (dev->idle)
+ return IRQ_NONE;
+
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_free_mem;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if (cpu_is_omap15xx())
dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
goto err_free_irq;
}
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return 0;
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
/* ----- begin of usb layer ---------------------------------------------- */
-/* The usb i2c interface uses a vid/pid pair donated by */
-/* Future Technology Devices International Ltd. */
+/*
+ * Initially the usb i2c interface uses a vid/pid pair donated by
+ * Future Technology Devices International Ltd., later a pair was
+ * bought from EZPrototypes
+ */
static struct usb_device_id i2c_tiny_usb_table [] = {
- { USB_DEVICE(0x0403, 0xc631) },
- { } /* Terminating entry */
+ { USB_DEVICE(0x0403, 0xc631) }, /* FTDI */
+ { USB_DEVICE(0x1c40, 0x0534) }, /* EZPrototypes */
+ { } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, i2c_tiny_usb_table);
* Context: can sleep
*
* This routine is used to declare an I2C adapter when its bus number
- * matters. Example: for I2C adapters from system-on-chip CPUs, or
- * otherwise built in to the system's mainboard, and where i2c_board_info
+ * matters. For example, use it for I2C adapters from system-on-chip CPUs,
+ * or otherwise built in to the system's mainboard, and where i2c_board_info
* is used to properly configure I2C devices.
*
* If no devices have pre-been declared for this bus, then be sure to
}
module_init(ide_arm_init);
+
+MODULE_LICENSE("GPL");
}
module_init(init_e100_ide);
+
+MODULE_LICENSE("GPL");
ide_init_port_data(hwif, index);
ide_init_port_hw(hwif, &hw);
hwif_setup(hwif);
+ hwif->host_flags = IDE_HFLAG_NO_IO_32BIT;
printk(KERN_INFO "ide%d: H8/300 generic IDE interface\n", index);
idx[0] = index;
}
module_init(h8300_ide_init);
+
+MODULE_LICENSE("GPL");
/*
* FIXME:
+ * - change master/slave IDENTIFY order
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
local_irq_restore(flags);
return 0;
}
- ata_input_data(drive, id, SECTOR_WORDS);
+ hwif->ata_input_data(drive, id, SECTOR_WORDS);
(void)ide_read_status(drive); /* clear drive IRQ */
local_irq_enable();
local_irq_restore(flags);
module_init(pnpide_init);
module_exit(pnpide_exit);
+
+MODULE_LICENSE("GPL");
printk(KERN_DEBUG "%s: Wait for ready failed before probe !\n", hwif->name);
/*
- * Need to probe slave device first to make it release PDIAG-.
+ * Second drive should only exist if first drive was found,
+ * but a lot of cdrom drives are configured as single slaves.
*/
- for (unit = MAX_DRIVES - 1; unit >= 0; unit--) {
+ for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
drive->dn = (hwif->channel ? 2 : 0) + unit;
(void) probe_for_drive(drive);
}
module_init(buddha_init);
+
+MODULE_LICENSE("GPL");
}
module_init(falconide_init);
+
+MODULE_LICENSE("GPL");
}
module_init(gayle_init);
+
+MODULE_LICENSE("GPL");
}
module_init(macide_init);
+
+MODULE_LICENSE("GPL");
}
module_init(q40ide_init);
+
+MODULE_LICENSE("GPL");
MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
module_init(cmd640x_init);
+
+MODULE_LICENSE("GPL");
static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
{
- unsigned long bar5 = pci_resource_start(dev, 5);
+ resource_size_t bar5 = pci_resource_start(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
void __iomem *ioaddr;
}
module_init(mpc8xx_ide_probe);
+
+MODULE_LICENSE("GPL");
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
module_init(pmac_ide_probe);
+
+MODULE_LICENSE("GPL");
{
struct rtable *rt;
struct flowi fl;
- u32 dst_ip = dst_in->sin_addr.s_addr;
+ __be32 dst_ip = dst_in->sin_addr.s_addr;
memset(&fl, 0, sizeof fl);
fl.nl_u.ip4_u.daddr = dst_ip;
struct sockaddr_in *dst_in,
struct rdma_dev_addr *addr)
{
- u32 src_ip = src_in->sin_addr.s_addr;
- u32 dst_ip = dst_in->sin_addr.s_addr;
+ __be32 src_ip = src_in->sin_addr.s_addr;
+ __be32 dst_ip = dst_in->sin_addr.s_addr;
struct flowi fl;
struct rtable *rt;
struct neighbour *neigh;
struct rdma_dev_addr *addr)
{
struct net_device *dev;
- u32 src_ip = src_in->sin_addr.s_addr;
+ __be32 src_ip = src_in->sin_addr.s_addr;
__be32 dst_ip = dst_in->sin_addr.s_addr;
int ret;
spin_unlock_irqrestore(&cm.lock, flags);
} while( (ret == -EAGAIN) && idr_pre_get(&cm.local_id_table, GFP_KERNEL) );
- cm_id_priv->id.local_id = (__force __be32) (id ^ cm.random_id_operand);
+ cm_id_priv->id.local_id = (__force __be32)id ^ cm.random_id_operand;
return ret;
}
union cma_ip_addr {
struct in6_addr ip6;
struct {
- __u32 pad[3];
- __u32 addr;
+ __be32 pad[3];
+ __be32 addr;
} ip4;
};
struct cma_hdr {
u8 cma_version;
u8 ip_version; /* IP version: 7:4 */
- __u16 port;
+ __be16 port;
union cma_ip_addr src_addr;
union cma_ip_addr dst_addr;
};
u8 sdp_version; /* Major version: 7:4 */
u8 ip_version; /* IP version: 7:4 */
u8 sdp_specific1[10];
- __u16 port;
- __u16 sdp_specific2;
+ __be16 port;
+ __be16 sdp_specific2;
union cma_ip_addr src_addr;
union cma_ip_addr dst_addr;
};
}
static int cma_get_net_info(void *hdr, enum rdma_port_space ps,
- u8 *ip_ver, __u16 *port,
+ u8 *ip_ver, __be16 *port,
union cma_ip_addr **src, union cma_ip_addr **dst)
{
switch (ps) {
static void cma_save_net_info(struct rdma_addr *addr,
struct rdma_addr *listen_addr,
- u8 ip_ver, __u16 port,
+ u8 ip_ver, __be16 port,
union cma_ip_addr *src, union cma_ip_addr *dst)
{
struct sockaddr_in *listen4, *ip4;
struct rdma_cm_id *id;
struct rdma_route *rt;
union cma_ip_addr *src, *dst;
- __u16 port;
+ __be16 port;
u8 ip_ver;
if (cma_get_net_info(ib_event->private_data, listen_id->ps,
struct rdma_id_private *id_priv;
struct rdma_cm_id *id;
union cma_ip_addr *src, *dst;
- __u16 port;
+ __be16 port;
u8 ip_ver;
int ret;
{
struct cma_hdr *cma_data, *cma_mask;
struct sdp_hh *sdp_data, *sdp_mask;
- __u32 ip4_addr;
+ __be32 ip4_addr;
struct in6_addr ip6_addr;
memset(compare, 0, sizeof *compare);
sdp_set_ip_ver(sdp_data, 4);
sdp_set_ip_ver(sdp_mask, 0xF);
sdp_data->dst_addr.ip4.addr = ip4_addr;
- sdp_mask->dst_addr.ip4.addr = ~0;
+ sdp_mask->dst_addr.ip4.addr = htonl(~0);
} else {
cma_set_ip_ver(cma_data, 4);
cma_set_ip_ver(cma_mask, 0xF);
cma_data->dst_addr.ip4.addr = ip4_addr;
- cma_mask->dst_addr.ip4.addr = ~0;
+ cma_mask->dst_addr.ip4.addr = htonl(~0);
}
break;
case AF_INET6:
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
- attrs.max_ird = ep->ord;
+ attrs.max_ird = ep->ird;
attrs.max_ord = ep->ord;
attrs.llp_stream_handle = ep;
attrs.next_state = IWCH_QP_STATE_RTS;
handle->handler = handler;
handle->name = "apm-power";
- handler->private = handle;
-
error = input_register_handle(handle);
if (error) {
printk(KERN_ERR
return 0;
}
-static void apmpower_disconnect(struct input_handle *handler)
+static void apmpower_disconnect(struct input_handle *handle)
{
- struct input_handle *handle = handler->private;
-
input_close_device(handle);
+ input_unregister_handle(handle);
kfree(handle);
}
{
struct evdev *evdev = container_of(dev, struct evdev, dev);
+ input_put_device(evdev->handle.dev);
kfree(evdev);
}
evdev->exist = 1;
evdev->minor = minor;
- evdev->handle.dev = dev;
+ evdev->handle.dev = input_get_device(dev);
evdev->handle.name = evdev->name;
evdev->handle.handler = handler;
evdev->handle.private = evdev;
{
struct joydev *joydev = container_of(dev, struct joydev, dev);
+ input_put_device(joydev->handle.dev);
kfree(joydev);
}
joydev->minor = minor;
joydev->exist = 1;
- joydev->handle.dev = dev;
+ joydev->handle.dev = input_get_device(dev);
joydev->handle.name = joydev->name;
joydev->handle.handler = handler;
joydev->handle.private = joydev;
#define KPKDI 0x0048
/* bit definitions */
-#define KPC_MKRN(n) ((((n) & 0x7) - 1) << 26) /* matrix key row number */
-#define KPC_MKCN(n) ((((n) & 0x7) - 1) << 23) /* matrix key column number */
-#define KPC_DKN(n) ((((n) & 0x7) - 1) << 6) /* direct key number */
+#define KPC_MKRN(n) ((((n) - 1) & 0x7) << 26) /* matrix key row number */
+#define KPC_MKCN(n) ((((n) - 1) & 0x7) << 23) /* matrix key column number */
+#define KPC_DKN(n) ((((n) - 1) & 0x7) << 6) /* direct key number */
#define KPC_AS (0x1 << 30) /* Automatic Scan bit */
#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
MODULE_DESCRIPTION("ixp4xx beeper driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ixp4xx-beeper");
static DEFINE_SPINLOCK(beep_lock);
#define GEYSER4_ISO_PRODUCT_ID 0x021B
#define GEYSER4_JIS_PRODUCT_ID 0x021C
+#define GEYSER4_HF_ANSI_PRODUCT_ID 0x0229
+#define GEYSER4_HF_ISO_PRODUCT_ID 0x022A
+#define GEYSER4_HF_JIS_PRODUCT_ID 0x022B
+
#define ATP_DEVICE(prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
{ ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
{ ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) },
+
/* Terminating entry */
{ }
};
(productId == GEYSER3_JIS_PRODUCT_ID) ||
(productId == GEYSER4_ANSI_PRODUCT_ID) ||
(productId == GEYSER4_ISO_PRODUCT_ID) ||
- (productId == GEYSER4_JIS_PRODUCT_ID);
+ (productId == GEYSER4_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_HF_JIS_PRODUCT_ID);
}
/*
{
struct mousedev *mousedev = container_of(dev, struct mousedev, dev);
+ input_put_device(mousedev->handle.dev);
kfree(mousedev);
}
mousedev->minor = minor;
mousedev->exist = 1;
- mousedev->handle.dev = dev;
+ mousedev->handle.dev = input_get_device(dev);
mousedev->handle.name = mousedev->name;
mousedev->handle.handler = handler;
mousedev->handle.private = mousedev;
if (led_dat->active_low)
level = !level;
- /* setting GPIOs with I2C/etc requires a preemptible task context */
+ /* Setting GPIOs with I2C/etc requires a task context, and we don't
+ * seem to have a reliable way to know if we're already in one; so
+ * let's just assume the worst.
+ */
if (led_dat->can_sleep) {
- if (preempt_count()) {
- led_dat->new_level = level;
- schedule_work(&led_dat->work);
- } else
- gpio_set_value_cansleep(led_dat->gpio, level);
+ led_dat->new_level = level;
+ schedule_work(&led_dat->work);
} else
gpio_set_value(led_dat->gpio, level);
}
cur_led = &pdata->leds[i];
led_dat = &leds_data[i];
+ ret = gpio_request(cur_led->gpio, cur_led->name);
+ if (ret < 0)
+ goto err;
+
led_dat->cdev.name = cur_led->name;
led_dat->cdev.default_trigger = cur_led->default_trigger;
led_dat->gpio = cur_led->gpio;
led_dat->cdev.brightness_set = gpio_led_set;
led_dat->cdev.brightness = LED_OFF;
- ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
- if (ret < 0)
- goto err;
-
gpio_direction_output(led_dat->gpio, led_dat->active_low);
INIT_WORK(&led_dat->work, gpio_led_work);
@for f in Preparation Guest Drivers Launcher Host Switcher Mastery; do echo "{==- $$f -==}"; make -s $$f; done; echo "{==-==}"
Preparation Preparation! Guest Drivers Launcher Host Switcher Mastery:
@sh ../../Documentation/lguest/extract $(PREFIX) `find ../../* -name '*.[chS]' -wholename '*lguest*'`
+Puppy:
+ @clear
+ @printf " __ \n (___()'\`;\n /, /\`\n \\\\\\\"--\\\\\\ \n"
+ @sleep 2; clear; printf "\n\n Sit!\n\n"; sleep 1; clear
+ @printf " __ \n ()'\`; \n /\\|\` \n / | \n(/_)_|_ \n"
+ @sleep 2; clear; printf "\n\n Stand!\n\n"; sleep 1; clear
+ @printf " __ \n ()'\`; \n /\\|\` \n /._.= \n /| / \n(_\_)_ \n"
+ @sleep 2; clear; printf "\n\n Good puppy!\n\n"; sleep 1; clear
/*P:400 This contains run_guest() which actually calls into the Host<->Guest
* Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something. This file also contains useful helper routines, and a
- * couple of non-obvious setup and teardown pieces which were implemented after
- * days of debugging pain. :*/
+ * Host to do something. This file also contains useful helper routines. :*/
#include <linux/module.h>
#include <linux/stringify.h>
#include <linux/stddef.h>
* easy.
*/
- /* We allocate an array of "struct page"s. map_vm_area() wants the
- * pages in this form, rather than just an array of pointers. */
+ /* We allocate an array of struct page pointers. map_vm_area() wants
+ * this, rather than just an array of pages. */
switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
GFP_KERNEL);
if (!switcher_page) {
}
}
-/* This is the write (copy into guest) version. */
+/* This is the write (copy into Guest) version. */
void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
unsigned bytes)
{
if (cpu->break_out)
return -EAGAIN;
- /* Check if there are any interrupts which can be delivered
- * now: if so, this sets up the hander to be executed when we
- * next run the Guest. */
+ /* Check if there are any interrupts which can be delivered now:
+ * if so, this sets up the hander to be executed when we next
+ * run the Guest. */
maybe_do_interrupt(cpu);
/* All long-lived kernel loops need to check with this horrible
lguest_arch_handle_trap(cpu);
}
+ /* Special case: Guest is 'dead' but wants a reboot. */
if (cpu->lg->dead == ERR_PTR(-ERESTART))
return -ERESTART;
+
/* The Guest is dead => "No such file or directory" */
return -ENOENT;
}
#include "lg.h"
/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed. Or, in the case of LHCALL_CRASH, both. */
+ * Or gets killed. Or, in the case of LHCALL_SHUTDOWN, both. */
static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
* pagetable. */
guest_pagetable_clear_all(cpu);
}
+/*:*/
+
+/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+ * written to, and then the Launcher writes to it (ie. the output of a virtual
+ * device), the Guest will still see the old page. In practice, this never
+ * happens: why would the Guest read a page which it has never written to? But
+ * a similar scenario might one day bite us, so it's worth mentioning. :*/
/*H:100
* Hypercalls
* However, if we are signalled or the Guest sends I/O to the
* Launcher, the run_guest() loop will exit without running the
* Guest. When it comes back it would try to re-run the
- * hypercall. */
+ * hypercall. Finding that bug sucked. */
cpu->hcall = NULL;
}
}
if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
sizeof(blk)))
return;
-
bitmap_andnot(blk, cpu->irqs_pending, blk, LGUEST_IRQS);
/* Find the first interrupt. */
clear_bit(syscall_vector, used_vectors);
}
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps
- * like page fault is easy. The only trick is that Intel decided that some
- * traps should have error codes: */
+/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+ * page fault is easy. The only trick is that Intel decided that some traps
+ * should have error codes: */
static int has_err(unsigned int trap)
{
return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
/*P:050 Lguest guests use a very simple method to describe devices. It's a
- * series of device descriptors contained just above the top of normal
+ * series of device descriptors contained just above the top of normal Guest
* memory.
*
* We use the standard "virtio" device infrastructure, which provides us with a
* console, a network and a block driver. Each one expects some configuration
- * information and a "virtqueue" mechanism to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data. :*/
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/lguest_launcher.h>
* Device configurations
*
* The configuration information for a device consists of one or more
- * virtqueues, a feature bitmaks, and some configuration bytes. The
+ * virtqueues, a feature bitmap, and some configuration bytes. The
* configuration bytes don't really matter to us: the Launcher sets them up, and
* the driver will look at them during setup.
*
};
/* When the virtio_ring code wants to prod the Host, it calls us here and we
- * make a hypercall. We hand the page number of the virtqueue so the Host
+ * make a hypercall. We hand the physical address of the virtqueue so the Host
* knows which virtqueue we're talking about. */
static void lg_notify(struct virtqueue *vq)
{
* allocate its own pages and tell the Host where they are, but for lguest it's
* simpler for the Host to simply tell us where the pages are.
*
- * So we provide devices with a "find virtqueue and set it up" function. */
+ * So we provide drivers with a "find the Nth virtqueue and set it up"
+ * function. */
static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
unsigned index,
void (*callback)(struct virtqueue *vq))
if (current != cpu->tsk)
return -EPERM;
- /* If the guest is already dead, we indicate why */
+ /* If the Guest is already dead, we indicate why */
if (lg->dead) {
size_t len;
return len;
}
- /* If we returned from read() last time because the Guest notified,
+ /* If we returned from read() last time because the Guest sent I/O,
* clear the flag. */
if (cpu->pending_notify)
cpu->pending_notify = 0;
return run_guest(cpu, (unsigned long __user *)user);
}
+/*L:025 This actually initializes a CPU. For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0. */
static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
{
+ /* We have a limited number the number of CPUs in the lguest struct. */
if (id >= NR_CPUS)
return -EINVAL;
+ /* Set up this CPU's id, and pointer back to the lguest struct. */
cpu->id = id;
cpu->lg = container_of((cpu - id), struct lguest, cpus[0]);
cpu->lg->nr_cpus++;
+
+ /* Each CPU has a timer it can set. */
init_clockdev(cpu);
/* We need a complete page for the Guest registers: they are accessible
* address. */
lguest_arch_setup_regs(cpu, start_ip);
- /* Initialize the queue for the waker to wait on */
+ /* Initialize the queue for the Waker to wait on */
init_waitqueue_head(&cpu->break_wq);
/* We keep a pointer to the Launcher task (ie. current task) for when
- * other Guests want to wake this one (inter-Guest I/O). */
+ * other Guests want to wake this one (eg. console input). */
cpu->tsk = current;
/* We need to keep a pointer to the Launcher's memory map, because if
* when the same Guest runs on the same CPU twice. */
cpu->last_pages = NULL;
+ /* No error == success. */
return 0;
}
}
/* Populate the easy fields of our "struct lguest" */
- lg->mem_base = (void __user *)(long)args[0];
+ lg->mem_base = (void __user *)args[0];
lg->pfn_limit = args[1];
- /* This is the first cpu */
+ /* This is the first cpu (cpu 0) and it will start booting at args[3] */
err = lg_cpu_start(&lg->cpus[0], 0, args[3]);
if (err)
goto release_guest;
/* Initialize the Guest's shadow page tables, using the toplevel
- * address the Launcher gave us. This allocates memory, so can
- * fail. */
+ * address the Launcher gave us. This allocates memory, so can fail. */
err = init_guest_pagetable(lg, args[2]);
if (err)
goto free_regs;
/*L:010 The first operation the Launcher does must be a write. All writes
* start with an unsigned long number: for the first write this must be
* LHREQ_INITIALIZE to set up the Guest. After that the Launcher can use
- * writes of other values to send interrupts. */
+ * writes of other values to send interrupts.
+ *
+ * Note that we overload the "offset" in the /dev/lguest file to indicate what
+ * CPU number we're dealing with. Currently this is always 0, since we only
+ * support uniprocessor Guests, but you can see the beginnings of SMP support
+ * here. */
static ssize_t write(struct file *file, const char __user *in,
size_t size, loff_t *off)
{
- /* Once the guest is initialized, we hold the "struct lguest" in the
+ /* Once the Guest is initialized, we hold the "struct lguest" in the
* file private data. */
struct lguest *lg = file->private_data;
const unsigned long __user *input = (const unsigned long __user *)in;
struct lg_cpu *uninitialized_var(cpu);
unsigned int cpu_id = *off;
+ /* The first value tells us what this request is. */
if (get_user(req, input) != 0)
return -EFAULT;
input++;
* previous encounters. It's functional, and as neat as it can be in the
* circumstances, but be wary, for these things are subtle and break easily.
* The Guest provides a virtual to physical mapping, but we can neither trust
- * it nor use it: we verify and convert it here to point the hardware to the
- * actual Guest pages when running the Guest. :*/
+ * it nor use it: we verify and convert it here then point the CPU to the
+ * converted Guest pages when running the Guest. :*/
/* Copyright (C) Rusty Russell IBM Corporation 2006.
* GPL v2 and any later version */
BUG_ON(!(pgd_flags(gpgd) & _PAGE_PRESENT));
return gpage + ((vaddr>>PAGE_SHIFT) % PTRS_PER_PTE) * sizeof(pte_t);
}
+/*:*/
+
+/*M:014 get_pfn is slow; it takes the mmap sem and calls get_user_pages. We
+ * could probably try to grab batches of pages here as an optimization
+ * (ie. pre-faulting). :*/
/*H:350 This routine takes a page number given by the Guest and converts it to
* an actual, physical page number. It can fail for several reasons: the
* and the page is read-only, or the write flag was set and the page was
* shared so had to be copied, but we ran out of memory.
*
- * This holds a reference to the page, so release_pte() is careful to
- * put that back. */
+ * This holds a reference to the page, so release_pte() is careful to put that
+ * back. */
static unsigned long get_pfn(unsigned long virtpfn, int write)
{
struct page *page;
* all processes. So when the page table above that address changes, we update
* all the page tables, not just the current one. This is rare.
*
- * The benefit is that when we have to track a new page table, we can copy keep
- * all the kernel mappings. This speeds up context switch immensely. */
+ * The benefit is that when we have to track a new page table, we can keep all
+ * the kernel mappings. This speeds up context switch immensely. */
void guest_set_pte(struct lg_cpu *cpu,
unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
{
- /* Kernel mappings must be changed on all top levels. Slow, but
- * doesn't happen often. */
+ /* Kernel mappings must be changed on all top levels. Slow, but doesn't
+ * happen often. */
if (vaddr >= cpu->lg->kernel_address) {
unsigned int i;
for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
/* We've made it through the page table code. Perhaps our tired brains are
* still processing the details, or perhaps we're simply glad it's over.
*
- * If nothing else, note that all this complexity in juggling shadow page
- * tables in sync with the Guest's page tables is for one reason: for most
- * Guests this page table dance determines how bad performance will be. This
- * is why Xen uses exotic direct Guest pagetable manipulation, and why both
- * Intel and AMD have implemented shadow page table support directly into
- * hardware.
+ * If nothing else, note that all this complexity in juggling shadow page tables
+ * in sync with the Guest's page tables is for one reason: for most Guests this
+ * page table dance determines how bad performance will be. This is why Xen
+ * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
+ * have implemented shadow page table support directly into hardware.
*
* There is just one file remaining in the Host. */
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+/*P:450 This file contains the x86-specific lguest code. It used to be all
+ * mixed in with drivers/lguest/core.c but several foolhardy code slashers
+ * wrestled most of the dependencies out to here in preparation for porting
+ * lguest to other architectures (see what I mean by foolhardy?).
+ *
+ * This also contains a couple of non-obvious setup and teardown pieces which
+ * were implemented after days of debugging pain. :*/
#include <linux/kernel.h>
#include <linux/start_kernel.h>
#include <linux/string.h>
* also simplify copy_in_guest_info(). Note that we'd still need to restore
* things when we exit to Launcher userspace, but that's fairly easy.
*
+ * We could also try using this hooks for PGE, but that might be too expensive.
+ *
* The hooks were designed for KVM, but we can also put them to good use. :*/
/*H:040 This is the i386-specific code to setup and run the Guest. Interrupts
* was doing. */
run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
- /* Note that the "regs" pointer contains two extra entries which are
+ /* Note that the "regs" structure contains two extra entries which are
* not really registers: a trap number which says what interrupt or
* trap made the switcher code come back, and an error code which some
* traps set. */
break;
case 14: /* We've intercepted a Page Fault. */
/* The Guest accessed a virtual address that wasn't mapped.
- * This happens a lot: we don't actually set up most of the
- * page tables for the Guest at all when we start: as it runs
- * it asks for more and more, and we set them up as
- * required. In this case, we don't even tell the Guest that
- * the fault happened.
+ * This happens a lot: we don't actually set up most of the page
+ * tables for the Guest at all when we start: as it runs it asks
+ * for more and more, and we set them up as required. In this
+ * case, we don't even tell the Guest that the fault happened.
*
* The errcode tells whether this was a read or a write, and
* whether kernel or userspace code. */
if (!deliver_trap(cpu, cpu->regs->trapnum))
/* If the Guest doesn't have a handler (either it hasn't
* registered any yet, or it's one of the faults we don't let
- * it handle), it dies with a cryptic error message. */
+ * it handle), it dies with this cryptic error message. */
kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
cpu->regs->trapnum, cpu->regs->eip,
cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
* The only exception is the interrupt handlers in switcher.S: their
* addresses are placed in a table (default_idt_entries), so we need to
* update the table with the new addresses. switcher_offset() is a
- * convenience function which returns the distance between the builtin
- * switcher code and the high-mapped copy we just made. */
+ * convenience function which returns the distance between the
+ * compiled-in switcher code and the high-mapped copy we just made. */
for (i = 0; i < IDT_ENTRIES; i++)
default_idt_entries[i] += switcher_offset();
state->guest_gdt_desc.address = (long)&state->guest_gdt;
/* We know where we want the stack to be when the Guest enters
- * the switcher: in pages->regs. The stack grows upwards, so
+ * the Switcher: in pages->regs. The stack grows upwards, so
* we start it at the end of that structure. */
state->guest_tss.sp0 = (long)(&pages->regs + 1);
/* And this is the GDT entry to use for the stack: we keep a
{
u32 tsc_speed;
- /* The pointer to the Guest's "struct lguest_data" is the only
- * argument. We check that address now. */
+ /* The pointer to the Guest's "struct lguest_data" is the only argument.
+ * We check that address now. */
if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
sizeof(*cpu->lg->lguest_data)))
return -EFAULT;
return 0;
}
+/*:*/
/*L:030 lguest_arch_setup_regs()
*
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 to do the low-level
- * Guest<->Host switch. It is as simple as it can be made, but it's naturally
- * very specific to x86.
+/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
+ * Host and Guest to do the low-level Guest<->Host switch. It is as simple as
+ * it can be made, but it's naturally very specific to x86.
*
* You have now completed Preparation. If this has whet your appetite; if you
* are feeling invigorated and refreshed then the next, more challenging stage
// Interrupts are turned back on: we are Guest.
iret
-// We treat two paths to switch back to the Host
+// We tread two paths to switch back to the Host
// Yet both must save Guest state and restore Host
// So we put the routine in a macro.
#define SWITCH_TO_HOST \
/*
* Copyright (C) 2003 Christophe Saout <christophe@saout.de>
* Copyright (C) 2004 Clemens Fruhwirth <clemens@endorphin.org>
- * Copyright (C) 2006-2007 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2006-2008 Red Hat, Inc. All rights reserved.
*
* This file is released under the GPL.
*/
struct workqueue_struct *io_queue;
struct workqueue_struct *crypt_queue;
+ wait_queue_head_t writeq;
+
/*
* crypto related data
*/
ctx->idx_out = bio_out ? bio_out->bi_idx : 0;
ctx->sector = sector + cc->iv_offset;
init_completion(&ctx->restart);
- /*
- * Crypto operation can be asynchronous,
- * ctx->pending is increased after request submission.
- * We need to ensure that we don't call the crypt finish
- * operation before pending got incremented
- * (dependent on crypt submission return code).
- */
- atomic_set(&ctx->pending, 2);
+ atomic_set(&ctx->pending, 1);
}
static int crypt_convert_block(struct crypt_config *cc,
static int crypt_convert(struct crypt_config *cc,
struct convert_context *ctx)
{
- int r = 0;
+ int r;
while(ctx->idx_in < ctx->bio_in->bi_vcnt &&
ctx->idx_out < ctx->bio_out->bi_vcnt) {
crypt_alloc_req(cc, ctx);
+ atomic_inc(&ctx->pending);
+
r = crypt_convert_block(cc, ctx, cc->req);
switch (r) {
+ /* async */
case -EBUSY:
wait_for_completion(&ctx->restart);
INIT_COMPLETION(ctx->restart);
/* fall through*/
case -EINPROGRESS:
- atomic_inc(&ctx->pending);
cc->req = NULL;
- r = 0;
- /* fall through*/
+ ctx->sector++;
+ continue;
+
+ /* sync */
case 0:
+ atomic_dec(&ctx->pending);
ctx->sector++;
continue;
- }
- break;
+ /* error */
+ default:
+ atomic_dec(&ctx->pending);
+ return r;
+ }
}
- /*
- * If there are pending crypto operation run async
- * code. Otherwise process return code synchronously.
- * The step of 2 ensures that async finish doesn't
- * call crypto finish too early.
- */
- if (atomic_sub_return(2, &ctx->pending))
- return -EINPROGRESS;
-
- return r;
+ return 0;
}
static void dm_crypt_bio_destructor(struct bio *bio)
static void kcryptd_io_write(struct dm_crypt_io *io)
{
struct bio *clone = io->ctx.bio_out;
+ struct crypt_config *cc = io->target->private;
generic_make_request(clone);
+ wake_up(&cc->writeq);
}
static void kcryptd_io(struct work_struct *work)
r = crypt_convert(cc, &io->ctx);
- if (r != -EINPROGRESS) {
+ if (atomic_dec_and_test(&io->ctx.pending)) {
+ /* processed, no running async crypto */
kcryptd_crypt_write_io_submit(io, r, 0);
if (unlikely(r < 0))
return;
atomic_inc(&io->pending);
/* out of memory -> run queues */
- if (unlikely(remaining))
+ if (unlikely(remaining)) {
+ /* wait for async crypto then reinitialize pending */
+ wait_event(cc->writeq, !atomic_read(&io->ctx.pending));
+ atomic_set(&io->ctx.pending, 1);
congestion_wait(WRITE, HZ/100);
+ }
}
}
r = crypt_convert(cc, &io->ctx);
- if (r != -EINPROGRESS)
+ if (atomic_dec_and_test(&io->ctx.pending))
kcryptd_crypt_read_done(io, r);
crypt_dec_pending(io);
goto bad_crypt_queue;
}
+ init_waitqueue_head(&cc->writeq);
ti->private = cc;
return 0;
wake_up_process(io->sleeper);
else {
- int r = io->error;
+ unsigned long r = io->error;
io_notify_fn fn = io->callback;
void *context = io->context;
* are in the no-sync state. We have to recover these by
* recopying from the default mirror to all the others.
*---------------------------------------------------------------*/
-static void recovery_complete(int read_err, unsigned int write_err,
+static void recovery_complete(int read_err, unsigned long write_err,
void *context)
{
struct region *reg = (struct region *)context;
}
if (write_err) {
- DMERR_LIMIT("Write error during recovery (error = 0x%x)",
+ DMERR_LIMIT("Write error during recovery (error = 0x%lx)",
write_err);
/*
* Bits correspond to devices (excluding default mirror).
* Called when the copy I/O has finished. kcopyd actually runs
* this code so don't block.
*/
-static void copy_callback(int read_err, unsigned int write_err, void *context)
+static void copy_callback(int read_err, unsigned long write_err, void *context)
{
struct dm_snap_pending_exception *pe = context;
struct dm_snapshot *s = pe->snap;
* Error state of the job.
*/
int read_err;
- unsigned int write_err;
+ unsigned long write_err;
/*
* Either READ or WRITE
{
void *context = job->context;
int read_err = job->read_err;
- unsigned int write_err = job->write_err;
+ unsigned long write_err = job->write_err;
kcopyd_notify_fn fn = job->fn;
struct kcopyd_client *kc = job->kc;
if (r < 0) {
/* error this rogue job */
if (job->rw == WRITE)
- job->write_err = (unsigned int) -1;
+ job->write_err = (unsigned long) -1L;
else
job->read_err = 1;
push(&_complete_jobs, job);
}
#define SUB_JOB_SIZE 128
-static void segment_complete(int read_err,
- unsigned int write_err, void *context)
+static void segment_complete(int read_err, unsigned long write_err,
+ void *context)
{
/* FIXME: tidy this function */
sector_t progress = 0;
* read_err is a boolean,
* write_err is a bitset, with 1 bit for each destination region
*/
-typedef void (*kcopyd_notify_fn)(int read_err,
- unsigned int write_err, void *context);
+typedef void (*kcopyd_notify_fn)(int read_err, unsigned long write_err,
+ void *context);
int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from,
unsigned int num_dests, struct io_region *dests,
static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh,
struct stripe_head_state *s, int disks)
{
+ int canceled_check = 0;
+
set_bit(STRIPE_HANDLE, &sh->state);
- /* Take one of the following actions:
- * 1/ start a check parity operation if (uptodate == disks)
- * 2/ finish a check parity operation and act on the result
- * 3/ skip to the writeback section if we previously
- * initiated a recovery operation
- */
- if (s->failed == 0 &&
- !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
- if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
- BUG_ON(s->uptodate != disks);
- clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
- sh->ops.count++;
- s->uptodate--;
- } else if (
- test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ /* complete a check operation */
+ if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ if (s->failed == 0) {
if (sh->ops.zero_sum_result == 0)
/* parity is correct (on disc,
* not in buffer any more)
s->uptodate++;
}
}
- }
+ } else
+ canceled_check = 1; /* STRIPE_INSYNC is not set */
}
/* check if we can clear a parity disk reconstruct */
clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
}
+ /* start a new check operation if there are no failures, the stripe is
+ * not insync, and a repair is not in flight
+ */
+ if (s->failed == 0 &&
+ !test_bit(STRIPE_INSYNC, &sh->state) &&
+ !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+ if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
+ BUG_ON(s->uptodate != disks);
+ clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
+ sh->ops.count++;
+ s->uptodate--;
+ }
+ }
+
/* Wait for check parity and compute block operations to complete
- * before write-back
+ * before write-back. If a failure occurred while the check operation
+ * was in flight we need to cycle this stripe through handle_stripe
+ * since the parity block may not be uptodate
*/
- if (!test_bit(STRIPE_INSYNC, &sh->state) &&
- !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
- !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
+ if (!canceled_check && !test_bit(STRIPE_INSYNC, &sh->state) &&
+ !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) &&
+ !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) {
struct r5dev *dev;
/* either failed parity check, or recovery is happening */
if (s->failed == 0)
obj-y += video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
+ifeq ($(CONFIG_DVB_CORE),)
+ obj-$(CONFIG_VIDEO_TUNER) += dvb/frontends/
+endif
return IRQ_NONE;
}
- if( 0 != (dev->ext)) {
- if( 0 != (dev->ext->irq_mask & isr )) {
- if( 0 != dev->ext->irq_func ) {
+ if (dev->ext) {
+ if (dev->ext->irq_mask & isr) {
+ if (dev->ext->irq_func)
dev->ext->irq_func(dev, &isr);
- }
isr &= ~dev->ext->irq_mask;
}
}
if (0 != (isr & (MASK_27))) {
DEB_INT(("irq: RPS0 (0x%08x).\n",isr));
- if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+ if (dev->vv_data && dev->vv_callback)
dev->vv_callback(dev,isr);
- }
isr &= ~MASK_27;
}
if (0 != (isr & (MASK_28))) {
- if( 0 != dev->vv_data && 0 != dev->vv_callback) {
+ if (dev->vv_data && dev->vv_callback)
dev->vv_callback(dev,isr);
- }
isr &= ~MASK_28;
}
if (0 != (isr & (MASK_16|MASK_17))) {
result = 0;
out:
- if( fh != 0 && result != 0 ) {
+ if (fh && result != 0) {
kfree(fh);
file->private_data = NULL;
}
{
struct net_device *dev = feed->priv;
- if (buffer2 != 0)
- printk(KERN_WARNING "buffer2 not 0: %p.\n", buffer2);
+ if (buffer2)
+ printk(KERN_WARNING "buffer2 not NULL: %p.\n", buffer2);
if (buffer1_len > 32768)
printk(KERN_WARNING "length > 32k: %zu.\n", buffer1_len);
/* printk("TS callback: %u bytes, %u TS cells @ %p.\n",
s5h1409_readreg(state, 0xe3) | 0x1100);
else
return s5h1409_writereg(state, 0xe3,
- s5h1409_readreg(state, 0xe3) & 0xeeff);
+ s5h1409_readreg(state, 0xe3) & 0xfeff);
}
static int s5h1409_sleep(struct dvb_frontend* fe, int enable)
.vidioc_s_input = vidioc_s_input,
};
+#ifdef CONFIG_PNP
+
static struct pnp_device_id cadet_pnp_devices[] = {
/* ADS Cadet AM/FM Radio Card */
{.id = "MSM0c24", .driver_data = 0},
.remove = NULL,
};
+#else
+static struct pnp_driver cadet_pnp_driver;
+#endif
+
static int cadet_probe(void)
{
static int iovals[8]={0x330,0x332,0x334,0x336,0x338,0x33a,0x33c,0x33e};
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
int rc;
buf=kmalloc(65,GFP_KERNEL);
+ if (!buf) {
+ v4l_err(&t->client,
+ "Unable to allocate memory. Detaching.\n");
+ return 0;
+ }
bt832_hexdump(i2c_client_s,buf);
if(buf[0x40] != 0x31) {
switch (cmd) {
case BT832_HEXDUMP: {
unsigned char *buf;
- buf=kmalloc(65,GFP_KERNEL);
+ buf = kmalloc(65, GFP_KERNEL);
+ if (!buf) {
+ v4l_err(&t->client,
+ "Unable to allocate memory\n");
+ break;
+ }
bt832_hexdump(&t->client,buf);
kfree(buf);
}
if (0 != err)
return err;
- f->type = V4L2_TUNER_ANALOG_TV;
+ f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
return 0;
if (unlikely(f->tuner != 0))
return -EINVAL;
- if (unlikely(f->type != V4L2_TUNER_ANALOG_TV))
+ if (unlikely(f->type != (btv->radio_user
+ ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV)))
return -EINVAL;
mutex_lock(&btv->lock);
btv->freq = f->frequency;
{
int minor = iminor(inode);
struct bttv *btv = NULL;
+ struct bttv_fh *fh;
unsigned int i;
dprintk("bttv: open minor=%d\n",minor);
return -ENODEV;
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
+
+ /* allocate per filehandle data */
+ fh = kmalloc(sizeof(*fh), GFP_KERNEL);
+ if (NULL == fh)
+ return -ENOMEM;
+ file->private_data = fh;
+ *fh = btv->init;
+ v4l2_prio_open(&btv->prio, &fh->prio);
+
mutex_lock(&btv->lock);
btv->radio_user++;
- file->private_data = btv;
-
bttv_call_i2c_clients(btv,AUDC_SET_RADIO,NULL);
audio_input(btv,TVAUDIO_INPUT_RADIO);
static int radio_release(struct inode *inode, struct file *file)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
btv->radio_user--;
static int radio_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
+ if (a->index != 0)
+ return -EINVAL;
+
memset(a, 0, sizeof(*a));
strcpy(a->name, "Radio");
+
return 0;
}
static ssize_t radio_read(struct file *file, char __user *data,
size_t count, loff_t *ppos)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.block_count = count/3;
cmd.buffer = data;
static unsigned int radio_poll(struct file *file, poll_table *wait)
{
- struct bttv *btv = file->private_data;
+ struct bttv_fh *fh = file->private_data;
+ struct bttv *btv = fh->btv;
struct rds_command cmd;
cmd.instance = file;
cmd.event_list = wait;
.open = radio_open,
.read = radio_read,
.release = radio_release,
+ .compat_ioctl = v4l_compat_ioctl32,
.ioctl = video_ioctl2,
.llseek = no_llseek,
.poll = radio_poll,
case 78631: /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, Dual channel ATSC and MPEG2 HW Encoder */
case 79001: /* WinTV-HVR1250 (PCIe, Retail, IR, full height, ATSC and Basic analog */
case 79101: /* WinTV-HVR1250 (PCIe, Retail, IR, half height, ATSC and Basic analog */
+ case 79561: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
case 79571: /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, ATSC and Basic analog */
case 79671: /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, ATSC and Basic analog */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
+ if (dev->i2c_bus[0].i2c_rc == 0)
+ hauppauge_eeprom(dev, eeprom+0x80);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
if (dev->i2c_bus[0].i2c_rc == 0)
- hauppauge_eeprom(dev, eeprom+0x80);
+ hauppauge_eeprom(dev, eeprom+0xc0);
break;
}
#define NO_SYNC_LINE (-1U)
-/*
- * CX23885 Assumptions
- * 1 line = 16 bytes of CDT
- * cmds size = 80
- * cdt size = 16 * linesize
- * iqsize = 64
- * maxlines = 6
- *
- * Address Space:
- * 0x00000000 0x00008fff FIFO clusters
- * 0x00010000 0x000104af Channel Management Data Structures
- * 0x000104b0 0x000104ff Free
- * 0x00010500 0x000108bf 15 channels * iqsize
- * 0x000108c0 0x000108ff Free
- * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables
- * 15 channels * (iqsize + (maxlines * linesize))
- * 0x00010ea0 0x00010xxx Free
- */
-
-static struct sram_channel cx23885_sram_channels[] = {
- [SRAM_CH01] = {
- .name = "VID A",
- .cmds_start = 0x10000,
- .ctrl_start = 0x105b0,
- .cdt = 0x107b0,
- .fifo_start = 0x40,
- .fifo_size = 0x2800,
- .ptr1_reg = DMA1_PTR1,
- .ptr2_reg = DMA1_PTR2,
- .cnt1_reg = DMA1_CNT1,
- .cnt2_reg = DMA1_CNT2,
- .jumponly = 1,
- },
- [SRAM_CH02] = {
- .name = "ch2",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA2_PTR1,
- .ptr2_reg = DMA2_PTR2,
- .cnt1_reg = DMA2_CNT1,
- .cnt2_reg = DMA2_CNT2,
- },
- [SRAM_CH03] = {
- .name = "TS1 B",
- .cmds_start = 0x100A0,
- .ctrl_start = 0x10630,
- .cdt = 0x10870,
- .fifo_start = 0x5000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA3_PTR1,
- .ptr2_reg = DMA3_PTR2,
- .cnt1_reg = DMA3_CNT1,
- .cnt2_reg = DMA3_CNT2,
- },
- [SRAM_CH04] = {
- .name = "ch4",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA4_PTR1,
- .ptr2_reg = DMA4_PTR2,
- .cnt1_reg = DMA4_CNT1,
- .cnt2_reg = DMA4_CNT2,
- },
- [SRAM_CH05] = {
- .name = "ch5",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH06] = {
- .name = "TS2 C",
- .cmds_start = 0x10140,
- .ctrl_start = 0x10680,
- .cdt = 0x108d0,
- .fifo_start = 0x6000,
- .fifo_size = 0x1000,
- .ptr1_reg = DMA5_PTR1,
- .ptr2_reg = DMA5_PTR2,
- .cnt1_reg = DMA5_CNT1,
- .cnt2_reg = DMA5_CNT2,
- },
- [SRAM_CH07] = {
- .name = "ch7",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA6_PTR1,
- .ptr2_reg = DMA6_PTR2,
- .cnt1_reg = DMA6_CNT1,
- .cnt2_reg = DMA6_CNT2,
- },
- [SRAM_CH08] = {
- .name = "ch8",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA7_PTR1,
- .ptr2_reg = DMA7_PTR2,
- .cnt1_reg = DMA7_CNT1,
- .cnt2_reg = DMA7_CNT2,
- },
- [SRAM_CH09] = {
- .name = "ch9",
- .cmds_start = 0x0,
- .ctrl_start = 0x0,
- .cdt = 0x0,
- .fifo_start = 0x0,
- .fifo_size = 0x0,
- .ptr1_reg = DMA8_PTR1,
- .ptr2_reg = DMA8_PTR2,
- .cnt1_reg = DMA8_CNT1,
- .cnt2_reg = DMA8_CNT2,
- },
-};
-
/* FIXME, these allocations will change when
* analog arrives. The be reviewed.
* CX23887 Assumptions
atomic_inc(&dev->refcount);
dev->nr = cx23885_devcount++;
+ dev->sram_channels = cx23887_sram_channels;
sprintf(dev->name, "cx23885[%d]", dev->nr);
mutex_lock(&devlist);
/* Configure the internal memory */
if(dev->pci->device == 0x8880) {
dev->bridge = CX23885_BRIDGE_887;
- dev->sram_channels = cx23887_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 25000000;
} else
if(dev->pci->device == 0x8852) {
dev->bridge = CX23885_BRIDGE_885;
- dev->sram_channels = cx23885_sram_channels;
/* Apply a sensible clock frequency for the PCIe bridge */
dev->clk_freq = 28000000;
} else
device_for_each_child(&dpc->i2c_adapter.dev, dpc, dpc_check_clients);
/* check if all devices are present */
- if( 0 == dpc->saa7111a ) {
+ if (!dpc->saa7111a) {
DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n"));
i2c_del_adapter(&dpc->i2c_adapter);
kfree(dpc);
default:
tuner_info("microtune %s found, not (yet?) supported, sorry :-/\n",
name);
- return 0;
+ return NULL;
}
strlcpy(fe->ops.tuner_ops.info.name, name,
device_for_each_child(&mxb->i2c_adapter.dev, mxb, mxb_check_clients);
/* check if all devices are present */
- if( 0 == mxb->tea6420_1 || 0 == mxb->tea6420_2 || 0 == mxb->tea6415c
- || 0 == mxb->tda9840 || 0 == mxb->saa7111a || 0 == mxb->tuner ) {
-
+ if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
+ !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) {
printk("mxb: did not find all i2c devices. aborting\n");
i2c_del_adapter(&mxb->i2c_adapter);
kfree(mxb);
int ret = 0;
if (!cptr) return -EINVAL;
LOCK_TAKE(cptr->hdw->big_lock); do {
- if (cptr->info->set_value != 0) {
+ if (cptr->info->set_value) {
if (cptr->info->type == pvr2_ctl_bitmask) {
mask &= cptr->info->def.type_bitmask.valid_bits;
} else if (cptr->info->type == pvr2_ctl_int) {
int pvr2_ctrl_is_writable(struct pvr2_ctrl *cptr)
{
if (!cptr) return 0;
- return cptr->info->set_value != 0;
+ return cptr->info->set_value != NULL;
}
+/*------------------------------------------------------------------------*/
+/* Hauppauge PVR-USB2 Model 73xxx */
+
+static const char *pvr2_client_73xxx[] = {
+ "cx25840",
+ "tuner",
+};
+
+static const char *pvr2_fw1_names_73xxx[] = {
+ "v4l-pvrusb2-73xxx-01.fw",
+};
+
+static const struct pvr2_device_desc pvr2_device_73xxx = {
+ .description = "WinTV PVR USB2 Model Category 73xxxx",
+ .shortname = "73xxx",
+ .client_modules.lst = pvr2_client_73xxx,
+ .client_modules.cnt = ARRAY_SIZE(pvr2_client_73xxx),
+ .fx2_firmware.lst = pvr2_fw1_names_73xxx,
+ .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx),
+ .flag_has_cx25840 = !0,
+ .flag_has_hauppauge_rom = !0,
+#if 0
+ .flag_has_analogtuner = !0,
+ .flag_has_composite = !0,
+ .flag_has_svideo = !0,
+ .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+ .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE,
+ .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE,
+#else
+ .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE,
+#endif
+};
+
+
+
/*------------------------------------------------------------------------*/
/* Hauppauge PVR-USB2 Model 75xxx */
{ USB_DEVICE(0x11ba, 0x1001),
.driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2},
#endif
+ { USB_DEVICE(0x2040, 0x7300),
+ .driver_info = (kernel_ulong_t)&pvr2_device_73xxx},
{ USB_DEVICE(0x2040, 0x7500),
.driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
+ { USB_DEVICE(0x2040, 0x7501),
+ .driver_info = (kernel_ulong_t)&pvr2_device_75xxx},
{ }
};
for (idx = 0; idx < hdw->control_cnt; idx++) {
cptr = hdw->controls + idx;
- if (cptr->info->is_dirty == 0) continue;
+ if (!cptr->info->is_dirty) continue;
if (!cptr->info->is_dirty(cptr)) continue;
commit_flag = !0;
u16 address;
unsigned int pipe;
LOCK_TAKE(hdw->big_lock); do {
- if ((hdw->fw_buffer == 0) == !enable_flag) break;
+ if ((hdw->fw_buffer == NULL) == !enable_flag) break;
if (!enable_flag) {
pvr2_trace(PVR2_TRACE_FIRMWARE,
/* Return true if we're in a mode for retrieval CPU firmware */
int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
{
- return hdw->fw_buffer != 0;
+ return hdw->fw_buffer != NULL;
}
struct pvr2_buffer *bp;
mutex_lock(&sp->mutex); do {
pvr2_stream_internal_flush(sp);
- while ((bp = pvr2_stream_get_ready_buffer(sp)) != 0) {
+ while ((bp = pvr2_stream_get_ready_buffer(sp)) != NULL) {
pvr2_buffer_set_idle(bp);
}
if (sp->buffer_total_count != sp->buffer_target_count) {
if (!(cp->stream)) return 0;
pvr2_trace(PVR2_TRACE_START_STOP,
"/*---TRACE_READ---*/ pvr2_ioread_start id=%p",cp);
- while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != 0) {
+ while ((bp = pvr2_stream_get_idle_buffer(cp->stream)) != NULL) {
stat = pvr2_buffer_queue(bp);
if (stat < 0) {
pvr2_trace(PVR2_TRACE_DATA_FLOW,
struct urb *urb;
urb = pdev->sbuf[i].urb;
- if (urb != 0) {
+ if (urb) {
PWC_DEBUG_MEMORY("Unlinking URB %p\n", urb);
usb_kill_urb(urb);
}
struct urb *urb;
urb = pdev->sbuf[i].urb;
- if (urb != 0) {
+ if (urb) {
PWC_DEBUG_MEMORY("Freeing URB\n");
usb_free_urb(urb);
pdev->sbuf[i].urb = NULL;
/* Allocate video_device structure */
pdev->vdev = video_device_alloc();
- if (pdev->vdev == 0)
- {
+ if (!pdev->vdev) {
PWC_ERROR("Err, cannot allocate video_device struture. Failing probe.");
kfree(pdev);
return -ENOMEM;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
strlcpy(I2C_NAME(client), "saa7110", sizeof(I2C_NAME(client)));
decoder = kzalloc(sizeof(struct saa7110), GFP_KERNEL);
- if (decoder == 0) {
+ if (!decoder) {
kfree(client);
return -ENOMEM;
}
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == 0)
+ if (!client)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
printk("not enough kernel memory\n");
return -ENOMEM;
}
/* allocate memory for client structure */
client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
return -ENOMEM;
}
/* allocate memory for client structure */
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (0 == client) {
+ if (!client) {
return -ENOMEM;
}
return 0;
c = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (c == 0)
+ if (!c)
return -ENOMEM;
memcpy(c, &client_template, sizeof(struct i2c_client));
core = kzalloc(sizeof(struct tvp5150), GFP_KERNEL);
- if (core == 0) {
+ if (!core) {
kfree(c);
return -ENOMEM;
}
find_ioctl(d->u.slave, cmd,
(v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg);
}
+
+MODULE_LICENSE("GPL");
/* Use kmalloc */
mem = kmalloc(fh->v4l_buffers.buffer_size, GFP_KERNEL);
- if (mem == 0) {
+ if (!mem) {
dprintk(1,
KERN_ERR
"%s: v4l_fbuffer_alloc() - kmalloc for V4L buf %d failed\n",
}
-static ssize_t zr364xx_read(struct file *file, char *buf, size_t cnt,
+static ssize_t zr364xx_read(struct file *file, char __user *buf, size_t cnt,
loff_t * ppos)
{
unsigned long count = cnt;
struct tifm_dev *sock = host->dev;
unsigned int length;
unsigned int off;
- unsigned int t_size, p_off, p_cnt;
+ unsigned int t_size, p_cnt;
unsigned char *buf;
struct page *pg;
unsigned long flags = 0;
host->block_pos);
while (length) {
+ unsigned int uninitialized_var(p_off);
+
if (host->req->long_data) {
pg = nth_page(sg_page(&host->req->sg),
off >> PAGE_SHIFT);
static inline void asic3_write_register(struct asic3 *asic,
unsigned int reg, u32 value)
{
- iowrite16(value, (unsigned long)asic->mapping +
+ iowrite16(value, asic->mapping +
(reg >> asic->bus_shift));
}
static inline u32 asic3_read_register(struct asic3 *asic,
unsigned int reg)
{
- return ioread16((unsigned long)asic->mapping +
+ return ioread16(asic->mapping +
(reg >> asic->bus_shift));
}
if (!device || !acpi_driver_data(device))
return -EINVAL;
- fujitsu->acpi_handle = 0;
+ fujitsu->acpi_handle = NULL;
return 0;
}
sp->irq = pdev->irq;
sp->base_address = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
- if (sp->base_address == 0) {
+ if (!sp->base_address) {
dev_err(sp->dev, "Failed to ioremap pci memory\n");
result = -ENODEV;
goto error_ioremap;
{
int i;
- if (cpoint_name == INVALID || cpoint_type == NONE ||
+ if (cpoint_name == NULL || cpoint_type == NULL ||
cpoint_count < 1 || recur_count < 1)
return -EINVAL;
/* Someone else might have been playing with it. */
return -EAGAIN;
}
-
+ /* Fall through */
case FL_READY:
case FL_CFI_QUERY:
case FL_JEDEC_QUERY:
chip->state = FL_READY;
return 0;
+ case FL_SHUTDOWN:
+ /* The machine is rebooting now,so no one can get chip anymore */
+ return -EIO;
case FL_POINT:
/* Only if there's no operation suspended... */
if (mode == FL_READY && chip->oldstate == FL_READY)
return 0;
-
- case FL_SHUTDOWN:
- /* The machine is rebooting now,so no one can get chip anymore */
- return -EIO;
+ /* Fall through */
default:
sleep:
set_current_state(TASK_UNINTERRUPTIBLE);
default:
/* Not an idle state */
+ set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
spin_unlock(chip->mutex);
default:
/* Not an idle state */
+ set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&chip->wq, &wait);
spin_unlock_bh(chip->mutex);
if (token[1]) {
ret = parse_num(&erase_size, token[1]);
if (ret) {
- kfree(name);
parse_err("illegal erase size");
}
}
int ret = 0;
int i;
- if (info)
- for (i = 0; i < MAX_RESOURCES; i++)
- ret |= info->mtd[i]->suspend(info->mtd[i]);
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ ret |= info->mtd[i]->suspend(info->mtd[i]);
return ret;
}
struct physmap_flash_info *info = platform_get_drvdata(dev);
int i;
- if (info)
- for (i = 0; i < MAX_RESOURCES; i++)
- info->mtd[i]->resume(info->mtd[i]);
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ info->mtd[i]->resume(info->mtd[i]);
+
return 0;
}
struct physmap_flash_info *info = platform_get_drvdata(dev);
int i;
- for (i = 0; i < MAX_RESOURCES; i++)
- if (info && info->mtd[i]->suspend(info->mtd[i]) == 0)
+ for (i = 0; i < MAX_RESOURCES && info->mtd[i]; i++)
+ if (info->mtd[i]->suspend(info->mtd[i]) == 0)
info->mtd[i]->resume(info->mtd[i]);
}
#else
er_stat |= 1 << 1;
kfree(buf);
}
-
+out:
rtn = status;
if (er_stat == 0) { /* if ECC is available */
rtn = (status & ~NAND_STATUS_FAIL); /* clear the error bit */
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
- depends on PPC64 && PCI
+ depends on PPC_PASEMI && PCI
select PHYLIB
select INET_LRO
help
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
-obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac_driver.o
+pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
addr = sdev->bus->sprom.et0mac;
bp->phy_addr = sdev->bus->sprom.et0phyaddr;
}
+ /* Some ROMs have buggy PHY addresses with the high
+ * bits set (sign extension?). Truncate them to a
+ * valid PHY address. */
+ bp->phy_addr &= 0x1F;
+
memcpy(bp->dev->dev_addr, addr, 6);
if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
static int bf537mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned int data;
current_tx_ptr->skb = skb;
static void bf537mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned short len;
/* allocate a new skb for next time receive */
#include "bnx2x.h"
#include "bnx2x_init.h"
-#define DRV_MODULE_VERSION "1.40.22"
-#define DRV_MODULE_RELDATE "2007/11/27"
+#define DRV_MODULE_VERSION "1.42.4"
+#define DRV_MODULE_RELDATE "2008/4/9"
#define BNX2X_BC_VER 0x040200
/* Time in jiffies before concluding the transmitter is hung. */
func, mode);
REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
0xffffffff);
- REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
+ REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET,
0xfffc);
bnx2x_init_block(bp, MISC_COMMON_START, MISC_COMMON_END);
cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
- switch (cmd->port) {
- case PORT_TP:
- if (!(bp->supported & SUPPORTED_TP)) {
- DP(NETIF_MSG_LINK, "TP not supported\n");
- return -EINVAL;
- }
-
- if (bp->phy_flags & PHY_XGXS_FLAG) {
- bnx2x_link_reset(bp);
- bnx2x_link_settings_supported(bp, SWITCH_CFG_1G);
- bnx2x_phy_deassert(bp);
- }
- break;
-
- case PORT_FIBRE:
- if (!(bp->supported & SUPPORTED_FIBRE)) {
- DP(NETIF_MSG_LINK, "FIBRE not supported\n");
- return -EINVAL;
- }
-
- if (!(bp->phy_flags & PHY_XGXS_FLAG)) {
- bnx2x_link_reset(bp);
- bnx2x_link_settings_supported(bp, SWITCH_CFG_10G);
- bnx2x_phy_deassert(bp);
- }
- break;
-
- default:
- DP(NETIF_MSG_LINK, "Unknown port type\n");
- return -EINVAL;
- }
-
if (cmd->autoneg == AUTONEG_ENABLE) {
if (!(bp->supported & SUPPORTED_Autoneg)) {
DP(NETIF_MSG_LINK, "Aotoneg not supported\n");
*/
static inline void __get_rx_machine_lock(struct port *port)
{
- spin_lock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
+ spin_lock_bh(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
}
/**
*/
static inline void __release_rx_machine_lock(struct port *port)
{
- spin_unlock(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
+ spin_unlock_bh(&(SLAVE_AD_INFO(port->slave).rx_machine_lock));
}
/**
}
if (!list_empty(&bond->vlan_list)) {
- unsigned short vlan_id;
- int res = vlan_get_tag(skb, &vlan_id);
- if (!res) {
+ if (!vlan_get_tag(skb, &client_info->vlan_id))
client_info->tag = 1;
- client_info->vlan_id = vlan_id;
- }
}
if (!client_info->assigned) {
*/
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev)
{
- unsigned short vlan_id;
+ unsigned short uninitialized_var(vlan_id);
if (!list_empty(&bond->vlan_list) &&
!(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
netif_tx_unlock_bh(bond_dev);
/* Release the bonded slaves */
bond_release_all(bond_dev);
- bond_deinit(bond_dev);
- unregister_netdevice(bond_dev);
+ bond_destroy(bond);
}
#ifdef CONFIG_PROC_FS
if (command[0] == '-') {
dev = NULL;
+ original_mtu = 0;
bond_for_each_slave(bond, slave, i)
if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
dev = slave->dev;
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.2.4"
-#define DRV_RELDATE "January 28, 2008"
+#define DRV_VERSION "3.2.5"
+#define DRV_RELDATE "March 21, 2008"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
for (i = 0; i < SGE_RXQ_PER_SET; ++i)
if (q->fl[i].desc) {
- spin_lock(&adapter->sge.reg_lock);
+ spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
- spin_unlock(&adapter->sge.reg_lock);
+ spin_unlock_irq(&adapter->sge.reg_lock);
free_rx_bufs(pdev, &q->fl[i]);
kfree(q->fl[i].sdesc);
dma_free_coherent(&pdev->dev,
for (i = 0; i < SGE_TXQ_PER_SET; ++i)
if (q->txq[i].desc) {
- spin_lock(&adapter->sge.reg_lock);
+ spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
- spin_unlock(&adapter->sge.reg_lock);
+ spin_unlock_irq(&adapter->sge.reg_lock);
if (q->txq[i].sdesc) {
free_tx_desc(adapter, &q->txq[i],
q->txq[i].in_use);
}
if (q->rspq.desc) {
- spin_lock(&adapter->sge.reg_lock);
+ spin_lock_irq(&adapter->sge.reg_lock);
t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
- spin_unlock(&adapter->sge.reg_lock);
+ spin_unlock_irq(&adapter->sge.reg_lock);
dma_free_coherent(&pdev->dev,
q->rspq.size * sizeof(struct rsp_desc),
q->rspq.desc, q->rspq.phys_addr);
(16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
MAX_FRAME_SIZE + 2 + sizeof(struct cpl_rx_pkt);
- spin_lock(&adapter->sge.reg_lock);
+ spin_lock_irq(&adapter->sge.reg_lock);
/* FL threshold comparison uses < */
ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
goto err_unlock;
}
- spin_unlock(&adapter->sge.reg_lock);
+ spin_unlock_irq(&adapter->sge.reg_lock);
q->adap = adapter;
q->netdev = dev;
return 0;
err_unlock:
- spin_unlock(&adapter->sge.reg_lock);
+ spin_unlock_irq(&adapter->sge.reg_lock);
err:
t3_free_qset(adapter, q);
return ret;
/* Set address filter table */
dm9000_hash_table(dev);
- /* Activate DM9000 */
- iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN);
/* Enable TX/RX interrupt mask */
iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM);
struct dm9000_rxhdr {
u8 RxPktReady;
u8 RxStatus;
- u16 RxLen;
+ __le16 RxLen;
} __attribute__((__packed__));
/*
int i, oft;
u32 hash_val;
u16 hash_table[4];
+ u8 rcr = RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN;
unsigned long flags;
dm9000_dbg(db, 1, "entering %s\n", __func__);
/* broadcast address */
hash_table[3] = 0x8000;
+ if (dev->flags & IFF_PROMISC)
+ rcr |= RCR_PRMSC;
+
+ if (dev->flags & IFF_ALLMULTI)
+ rcr |= RCR_ALL;
+
/* the multicast address in Hash Table : 64 bits */
for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
hash_val = ether_crc_le(6, mcptr->dmi_addr) & 0x3f;
iow(db, oft++, hash_table[i] >> 8);
}
+ iow(db, DM9000_RCR, rcr);
spin_unlock_irqrestore(&db->lock, flags);
}
/* Template for a freshly allocated RFD */
nic->blank_rfd.command = 0;
- nic->blank_rfd.rbd = 0xFFFFFFFF;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
/* MII setup */
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0087"
+#define DRV_VERSION "EHEA_0089"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
dev->vlan_rx_add_vid = ehea_vlan_rx_add_vid;
dev->vlan_rx_kill_vid = ehea_vlan_rx_kill_vid;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO
- | NETIF_F_HIGHDMA | NETIF_F_HW_CSUM | NETIF_F_HW_VLAN_TX
+ | NETIF_F_HIGHDMA | NETIF_F_IP_CSUM | NETIF_F_HW_VLAN_TX
| NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER
| NETIF_F_LLTX;
dev->tx_timeout = &ehea_tx_watchdog;
#endif
static struct of_device_id mpc52xx_fec_match[] = {
+ { .type = "network", .compatible = "fsl,mpc5200b-fec", },
{ .type = "network", .compatible = "fsl,mpc5200-fec", },
{ .type = "network", .compatible = "mpc5200-fec", },
{ }
static struct of_device_id mpc52xx_fec_mdio_match[] = {
{ .compatible = "fsl,mpc5200b-mdio", },
+ { .compatible = "fsl,mpc5200-mdio", },
{ .compatible = "mpc5200b-fec-phy", },
{}
};
struct ring_desc* start_tx;
struct ring_desc* prev_tx;
struct nv_skb_map* prev_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
/* set tx flags */
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.orig = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
struct ring_desc_ex* prev_tx;
struct nv_skb_map* prev_tx_ctx;
struct nv_skb_map* start_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
start_tx->txvlan = 0;
}
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (np->tx_limit) {
/* Limit the number of outstanding tx. Setup all fragments, but
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.ex = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
np->tx_pkts_in_progress--;
if (np->tx_change_owner) {
- __le32 flaglen = le32_to_cpu(np->tx_change_owner->first_tx_desc->flaglen);
- flaglen |= NV_TX2_VALID;
- np->tx_change_owner->first_tx_desc->flaglen = cpu_to_le32(flaglen);
+ np->tx_change_owner->first_tx_desc->flaglen |=
+ cpu_to_le32(NV_TX2_VALID);
np->tx_pkts_in_progress++;
np->tx_change_owner = np->tx_change_owner->next_tx_ctx;
static inline u16 emac_tx_csum(struct emac_instance *dev,
struct sk_buff *skb)
{
- if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
- skb->ip_summed == CHECKSUM_PARTIAL)) {
+ if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL)) {
++dev->stats.tx_packets_csum;
return EMAC_TX_CTRL_TAH_CSUM;
}
/* Receive Descriptor - Advanced */
union e1000_adv_rx_desc {
struct {
- u64 pkt_addr; /* Packet buffer address */
- u64 hdr_addr; /* Header buffer address */
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
} read;
struct {
struct {
struct {
- u16 pkt_info; /* RSS type, Packet type */
- u16 hdr_info; /* Split Header,
- * header buffer length */
+ __le16 pkt_info; /* RSS type, Packet type */
+ __le16 hdr_info; /* Split Header,
+ * header buffer length */
} lo_dword;
union {
- u32 rss; /* RSS Hash */
+ __le32 rss; /* RSS Hash */
struct {
- u16 ip_id; /* IP id */
- u16 csum; /* Packet Checksum */
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- u32 status_error; /* ext status/error */
- u16 length; /* Packet length */
- u16 vlan; /* VLAN tag */
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
/* Transmit Descriptor - Advanced */
union e1000_adv_tx_desc {
struct {
- u64 buffer_addr; /* Address of descriptor's data buf */
- u32 cmd_type_len;
- u32 olinfo_status;
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
} read;
struct {
- u64 rsvd; /* Reserved */
- u32 nxtseq_seed;
- u32 status;
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
} wb;
};
/* Context descriptors */
struct e1000_adv_tx_context_desc {
- u32 vlan_macip_lens;
- u32 seqnum_seed;
- u32 type_tucmd_mlhl;
- u32 mss_l4len_idx;
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
};
#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
/* Receive Descriptor */
struct e1000_rx_desc {
- u64 buffer_addr; /* Address of the descriptor's data buffer */
- u16 length; /* Length of data DMAed into data buffer */
- u16 csum; /* Packet checksum */
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
u8 status; /* Descriptor status */
u8 errors; /* Descriptor Errors */
- u16 special;
+ __le16 special;
};
/* Receive Descriptor - Extended */
union e1000_rx_desc_extended {
struct {
- u64 buffer_addr;
- u64 reserved;
+ __le64 buffer_addr;
+ __le64 reserved;
} read;
struct {
struct {
- u32 mrq; /* Multiple Rx Queues */
+ __le32 mrq; /* Multiple Rx Queues */
union {
- u32 rss; /* RSS Hash */
+ __le32 rss; /* RSS Hash */
struct {
- u16 ip_id; /* IP id */
- u16 csum; /* Packet Checksum */
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- u32 status_error; /* ext status/error */
- u16 length;
- u16 vlan; /* VLAN tag */
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
union e1000_rx_desc_packet_split {
struct {
/* one buffer for protocol header(s), three data buffers */
- u64 buffer_addr[MAX_PS_BUFFERS];
+ __le64 buffer_addr[MAX_PS_BUFFERS];
} read;
struct {
struct {
- u32 mrq; /* Multiple Rx Queues */
+ __le32 mrq; /* Multiple Rx Queues */
union {
- u32 rss; /* RSS Hash */
+ __le32 rss; /* RSS Hash */
struct {
- u16 ip_id; /* IP id */
- u16 csum; /* Packet Checksum */
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
- u32 status_error; /* ext status/error */
- u16 length0; /* length of buffer 0 */
- u16 vlan; /* VLAN tag */
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
} middle;
struct {
- u16 header_status;
- u16 length[3]; /* length of buffers 1-3 */
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
} upper;
- u64 reserved;
+ __le64 reserved;
} wb; /* writeback */
};
/* Transmit Descriptor */
struct e1000_tx_desc {
- u64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
union {
- u32 data;
+ __le32 data;
struct {
- u16 length; /* Data buffer length */
+ __le16 length; /* Data buffer length */
u8 cso; /* Checksum offset */
u8 cmd; /* Descriptor control */
} flags;
} lower;
union {
- u32 data;
+ __le32 data;
struct {
u8 status; /* Descriptor status */
u8 css; /* Checksum start */
- u16 special;
+ __le16 special;
} fields;
} upper;
};
/* Offload Context Descriptor */
struct e1000_context_desc {
union {
- u32 ip_config;
+ __le32 ip_config;
struct {
u8 ipcss; /* IP checksum start */
u8 ipcso; /* IP checksum offset */
- u16 ipcse; /* IP checksum end */
+ __le16 ipcse; /* IP checksum end */
} ip_fields;
} lower_setup;
union {
- u32 tcp_config;
+ __le32 tcp_config;
struct {
u8 tucss; /* TCP checksum start */
u8 tucso; /* TCP checksum offset */
- u16 tucse; /* TCP checksum end */
+ __le16 tucse; /* TCP checksum end */
} tcp_fields;
} upper_setup;
- u32 cmd_and_length;
+ __le32 cmd_and_length;
union {
- u32 data;
+ __le32 data;
struct {
u8 status; /* Descriptor status */
u8 hdr_len; /* Header length */
- u16 mss; /* Maximum segment size */
+ __le16 mss; /* Maximum segment size */
} fields;
} tcp_seg_setup;
};
/* Offload data descriptor */
struct e1000_data_desc {
- u64 buffer_addr; /* Address of the descriptor's buffer address */
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
union {
- u32 data;
+ __le32 data;
struct {
- u16 length; /* Data buffer length */
+ __le16 length; /* Data buffer length */
u8 typ_len_ext;
u8 cmd;
} flags;
} lower;
union {
- u32 data;
+ __le32 data;
struct {
u8 status; /* Descriptor status */
u8 popts; /* Packet Options */
- u16 special;
+ __le16 special;
} fields;
} upper;
};
return 1;
}
+
+static inline u32 get_head(struct igb_ring *tx_ring)
+{
+ void *end = (struct e1000_tx_desc *)tx_ring->desc + tx_ring->count;
+ return le32_to_cpu(*(volatile __le32 *)end);
+}
+
/**
* igb_clean_tx_irq - Reclaim resources after transmit completes
* @adapter: board private structure
unsigned int total_bytes = 0, total_packets = 0;
rmb();
- head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
- + tx_ring->count);
- head = le32_to_cpu(head);
+ head = get_head(tx_ring);
i = tx_ring->next_to_clean;
while (1) {
while (i != head) {
}
oldhead = head;
rmb();
- head = *(volatile u32 *)((struct e1000_tx_desc *)tx_ring->desc
- + tx_ring->count);
- head = le32_to_cpu(head);
+ head = get_head(tx_ring);
if (head == oldhead)
goto done_cleaning;
} /* while (1) */
* @vlan: descriptor vlan field as written by hardware (no le/be conversion)
* @skb: pointer to sk_buff to be indicated to stack
**/
-static void igb_receive_skb(struct igb_adapter *adapter, u8 status, u16 vlan,
+static void igb_receive_skb(struct igb_adapter *adapter, u8 status, __le16 vlan,
struct sk_buff *skb)
{
if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
* that case, it fills the header buffer and spills the rest
* into the page.
*/
- hlen = le16_to_cpu((rx_desc->wb.lower.lo_dword.hdr_info &
- E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT);
+ hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
if (hlen > adapter->rx_ps_hdr_size)
hlen = adapter->rx_ps_hdr_size;
static int veth_allocate_events(HvLpIndex rlp, int number)
{
- struct veth_allocation vc = { COMPLETION_INITIALIZER(vc.c), 0 };
+ struct veth_allocation vc =
+ { COMPLETION_INITIALIZER_ONSTACK(vc.c), 0 };
mf_allocate_lp_events(rlp, HvLpEvent_Type_VirtualLan,
sizeof(struct veth_lpevent), number,
struct ixgb_buffer *buffer_info;
struct sk_buff *skb;
unsigned int i;
- int num_group_tail_writes;
long cleancount;
i = rx_ring->next_to_use;
buffer_info = &rx_ring->buffer_info[i];
cleancount = IXGB_DESC_UNUSED(rx_ring);
- num_group_tail_writes = IXGB_RX_BUFFER_WRITE;
/* leave three descriptors unused */
while(--cleancount > 2) {
(sizeof(struct netxen_cmd_buffer) * adapter->max_tx_desc_count)
#define RCV_BUFFSIZE \
(sizeof(struct netxen_rx_buffer) * rcv_desc->max_rx_desc_count)
-#define find_diff_among(a,b,range) ((a)<=(b)?((b)-(a)):((b)+(range)-(a)))
+#define find_diff_among(a,b,range) ((a)<(b)?((b)-(a)):((b)+(range)-(a)))
#define NETXEN_NETDEV_STATUS 0x1
#define NETXEN_RCV_PRODUCER_OFFSET 0
? RCV_DESC_LRO : \
(RCV_DESC_NORMAL)))
-#define MAX_CMD_DESCRIPTORS 1024
+#define MAX_CMD_DESCRIPTORS 4096
#define MAX_RCV_DESCRIPTORS 16384
#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4)
#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4)
u64 badskblen;
u64 nocmddescriptor;
u64 polled;
- u64 uphappy;
- u64 updropped;
- u64 uplcong;
- u64 uphcong;
- u64 upmcong;
- u64 updunno;
- u64 skbfreed;
+ u64 rxdropped;
u64 txdropped;
- u64 txnullskb;
u64 csummed;
u64 no_rcv;
u64 rxbytes;
u32 flags;
u32 producer;
u32 rcv_pending; /* Num of bufs posted in phantom */
- u32 rcv_free; /* Num of bufs in free list */
dma_addr_t phys_addr;
struct pci_dev *phys_pdev;
struct rcv_desc *desc_head; /* address of rx ring in Phantom */
int mtu;
int portnum;
- spinlock_t tx_lock;
- spinlock_t lock;
struct work_struct watchdog_task;
struct timer_list watchdog_timer;
struct work_struct tx_timeout_task;
u32 cmd_producer;
__le32 *cmd_consumer;
-
u32 last_cmd_consumer;
+
u32 max_tx_desc_count;
u32 max_rx_desc_count;
u32 max_jumbo_rx_desc_count;
u32 max_lro_rx_desc_count;
- /* Num of instances active on cmd buffer ring */
- u32 proc_cmd_buf_counter;
-
- u32 num_threads, total_threads; /*Use to keep track of xmit threads */
u32 flags;
u32 irq;
struct pci_dev *ctx_desc_pdev;
dma_addr_t ctx_desc_phys_addr;
int intr_scheme;
+ int msi_mode;
int (*enable_phy_interrupts) (struct netxen_adapter *);
int (*disable_phy_interrupts) (struct netxen_adapter *);
void (*handle_phy_intr) (struct netxen_adapter *);
struct cmd_desc_type0 *desc, struct sk_buff *skb);
int netxen_nic_hw_resources(struct netxen_adapter *adapter);
void netxen_nic_clear_stats(struct netxen_adapter *adapter);
-int netxen_nic_rx_has_work(struct netxen_adapter *adapter);
-int netxen_nic_tx_has_work(struct netxen_adapter *adapter);
void netxen_watchdog_task(struct work_struct *work);
void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
u32 ringid);
-int netxen_process_cmd_ring(unsigned long data);
+int netxen_process_cmd_ring(struct netxen_adapter *adapter);
u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
void netxen_nic_set_multi(struct net_device *netdev);
int netxen_nic_change_mtu(struct net_device *netdev, int new_mtu);
{"bad_skb_len", NETXEN_NIC_STAT(stats.badskblen)},
{"no_cmd_desc", NETXEN_NIC_STAT(stats.nocmddescriptor)},
{"polled", NETXEN_NIC_STAT(stats.polled)},
- {"uphappy", NETXEN_NIC_STAT(stats.uphappy)},
- {"updropped", NETXEN_NIC_STAT(stats.updropped)},
- {"uplcong", NETXEN_NIC_STAT(stats.uplcong)},
- {"uphcong", NETXEN_NIC_STAT(stats.uphcong)},
- {"upmcong", NETXEN_NIC_STAT(stats.upmcong)},
- {"updunno", NETXEN_NIC_STAT(stats.updunno)},
- {"skb_freed", NETXEN_NIC_STAT(stats.skbfreed)},
{"tx_dropped", NETXEN_NIC_STAT(stats.txdropped)},
- {"tx_null_skb", NETXEN_NIC_STAT(stats.txnullskb)},
{"csummed", NETXEN_NIC_STAT(stats.csummed)},
{"no_rcv", NETXEN_NIC_STAT(stats.no_rcv)},
{"rx_bytes", NETXEN_NIC_STAT(stats.rxbytes)},
#define ISR_INT_MASK_SLOW (NETXEN_PCIX_PS_REG(PCIX_INT_MASK))
#define ISR_INT_TARGET_STATUS (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS))
#define ISR_INT_TARGET_MASK (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK))
+#define ISR_INT_TARGET_STATUS_F1 (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F1))
+#define ISR_INT_TARGET_MASK_F1 (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F1))
+#define ISR_INT_TARGET_STATUS_F2 (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F2))
+#define ISR_INT_TARGET_MASK_F2 (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F2))
+#define ISR_INT_TARGET_STATUS_F3 (NETXEN_PCIX_PS_REG(PCIX_TARGET_STATUS_F3))
+#define ISR_INT_TARGET_MASK_F3 (NETXEN_PCIX_PS_REG(PCIX_TARGET_MASK_F3))
#define NETXEN_PCI_MAPSIZE 128
#define NETXEN_PCI_DDR_NET (0x00000000UL)
#define PCIX_TARGET_STATUS (0x10118)
#define PCIX_TARGET_MASK (0x10128)
+#define PCIX_TARGET_STATUS_F1 (0x10160)
+#define PCIX_TARGET_MASK_F1 (0x10170)
+#define PCIX_TARGET_STATUS_F2 (0x10164)
+#define PCIX_TARGET_MASK_F2 (0x10174)
+#define PCIX_TARGET_STATUS_F3 (0x10168)
+#define PCIX_TARGET_MASK_F3 (0x10178)
#define PCIX_MSI_F0 (0x13000)
#define PCIX_MSI_F1 (0x13004)
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW));
printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name,
adapter->intr_scheme);
+ adapter->msi_mode = readl(
+ NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW));
DPRINTK(INFO, "Receive Peg ready too. starting stuff\n");
addr = netxen_alloc(adapter->ahw.pdev,
/* Window 1 call */
writel(INTR_SCHEME_PERPORT,
NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_HOST));
+ writel(MSI_MODE_MULTIFUNC,
+ NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_HOST));
writel(MPORT_MULTI_FUNCTION_MODE,
NETXEN_CRB_NORMALIZE(adapter, CRB_MPORT_MODE));
writel(PHAN_INITIALIZE_ACK,
for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
struct netxen_rx_buffer *rx_buf;
rcv_desc = &adapter->recv_ctx[ctxid].rcv_desc[ring];
- rcv_desc->rcv_free = rcv_desc->max_rx_desc_count;
rcv_desc->begin_alloc = 0;
rx_buf = rcv_desc->rx_buf_arr;
num_rx_bufs = rcv_desc->max_rx_desc_count;
return 0;
}
-int netxen_nic_rx_has_work(struct netxen_adapter *adapter)
-{
- int ctx;
-
- for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
- struct netxen_recv_context *recv_ctx =
- &(adapter->recv_ctx[ctx]);
- u32 consumer;
- struct status_desc *desc_head;
- struct status_desc *desc;
-
- consumer = recv_ctx->status_rx_consumer;
- desc_head = recv_ctx->rcv_status_desc_head;
- desc = &desc_head[consumer];
-
- if (netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)
- return 1;
- }
-
- return 0;
-}
-
static int netxen_nic_check_temp(struct netxen_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
void netxen_watchdog_task(struct work_struct *work)
{
- struct net_device *netdev;
struct netxen_adapter *adapter =
container_of(work, struct netxen_adapter, watchdog_task);
if (adapter->handle_phy_intr)
adapter->handle_phy_intr(adapter);
- netdev = adapter->netdev;
- if ((netif_running(netdev)) && !netif_carrier_ok(netdev) &&
- netxen_nic_link_ok(adapter) ) {
- printk(KERN_INFO "%s %s (port %d), Link is up\n",
- netxen_nic_driver_name, netdev->name, adapter->portnum);
- netif_carrier_on(netdev);
- netif_wake_queue(netdev);
- } else if(!(netif_running(netdev)) && netif_carrier_ok(netdev)) {
- printk(KERN_ERR "%s %s Link is Down\n",
- netxen_nic_driver_name, netdev->name);
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
-
mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
skb = (struct sk_buff *)buffer->skb;
if (likely(adapter->rx_csum &&
- netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
+ netxen_get_sts_status(sts_data) == STATUS_CKSUM_OK)) {
adapter->stats.csummed++;
skb->ip_summed = CHECKSUM_UNNECESSARY;
} else
skb->protocol = eth_type_trans(skb, netdev);
ret = netif_receive_skb(skb);
-
- /*
- * RH: Do we need these stats on a regular basis. Can we get it from
- * Linux stats.
- */
- switch (ret) {
- case NET_RX_SUCCESS:
- adapter->stats.uphappy++;
- break;
-
- case NET_RX_CN_LOW:
- adapter->stats.uplcong++;
- break;
-
- case NET_RX_CN_MOD:
- adapter->stats.upmcong++;
- break;
-
- case NET_RX_CN_HIGH:
- adapter->stats.uphcong++;
- break;
-
- case NET_RX_DROP:
- adapter->stats.updropped++;
- break;
-
- default:
- adapter->stats.updunno++;
- break;
- }
-
netdev->last_rx = jiffies;
- rcv_desc->rcv_free++;
rcv_desc->rcv_pending--;
/*
u32 producer = 0;
int count = 0, ring;
- DPRINTK(INFO, "procesing receive\n");
- /*
- * we assume in this case that there is only one port and that is
- * port #1...changes need to be done in firmware to indicate port
- * number as part of the descriptor. This way we will be able to get
- * the netdev which is associated with that device.
- */
while (count < max) {
desc = &desc_head[consumer];
if (!(netxen_get_sts_owner(desc) & STATUS_OWNER_HOST)) {
consumer = (consumer + 1) & (adapter->max_rx_desc_count - 1);
count++;
}
- if (count) {
- for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++) {
- netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
- }
- }
+ for (ring = 0; ring < NUM_RCV_DESC_RINGS; ring++)
+ netxen_post_rx_buffers_nodb(adapter, ctxid, ring);
/* update the consumer index in phantom */
if (count) {
/* Window = 1 */
writel(consumer,
NETXEN_CRB_NORMALIZE(adapter,
- recv_crb_registers[adapter->portnum].
+ recv_crb_registers[adapter->portnum].
crb_rcv_status_consumer));
- wmb();
}
return count;
}
/* Process Command status ring */
-int netxen_process_cmd_ring(unsigned long data)
+int netxen_process_cmd_ring(struct netxen_adapter *adapter)
{
- u32 last_consumer;
- u32 consumer;
- struct netxen_adapter *adapter = (struct netxen_adapter *)data;
- int count1 = 0;
- int count2 = 0;
+ u32 last_consumer, consumer;
+ int count = 0, i;
struct netxen_cmd_buffer *buffer;
- struct pci_dev *pdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct net_device *netdev = adapter->netdev;
struct netxen_skb_frag *frag;
- u32 i;
- int done;
+ int done = 0;
- spin_lock(&adapter->tx_lock);
last_consumer = adapter->last_cmd_consumer;
- DPRINTK(INFO, "procesing xmit complete\n");
- /* we assume in this case that there is only one port and that is
- * port #1...changes need to be done in firmware to indicate port
- * number as part of the descriptor. This way we will be able to get
- * the netdev which is associated with that device.
- */
-
consumer = le32_to_cpu(*(adapter->cmd_consumer));
- if (last_consumer == consumer) { /* Ring is empty */
- DPRINTK(INFO, "last_consumer %d == consumer %d\n",
- last_consumer, consumer);
- spin_unlock(&adapter->tx_lock);
- return 1;
- }
-
- adapter->proc_cmd_buf_counter++;
- /*
- * Not needed - does not seem to be used anywhere.
- * adapter->cmd_consumer = consumer;
- */
- spin_unlock(&adapter->tx_lock);
- while ((last_consumer != consumer) && (count1 < MAX_STATUS_HANDLE)) {
+ while (last_consumer != consumer) {
buffer = &adapter->cmd_buf_arr[last_consumer];
- pdev = adapter->pdev;
if (buffer->skb) {
frag = &buffer->frag_array[0];
pci_unmap_single(pdev, frag->dma, frag->length,
PCI_DMA_TODEVICE);
frag->dma = 0ULL;
for (i = 1; i < buffer->frag_count; i++) {
- DPRINTK(INFO, "getting fragment no %d\n", i);
frag++; /* Get the next frag */
pci_unmap_page(pdev, frag->dma, frag->length,
PCI_DMA_TODEVICE);
frag->dma = 0ULL;
}
- adapter->stats.skbfreed++;
+ adapter->stats.xmitfinished++;
dev_kfree_skb_any(buffer->skb);
buffer->skb = NULL;
- } else if (adapter->proc_cmd_buf_counter == 1) {
- adapter->stats.txnullskb++;
- }
- if (unlikely(netif_queue_stopped(adapter->netdev)
- && netif_carrier_ok(adapter->netdev))
- && ((jiffies - adapter->netdev->trans_start) >
- adapter->netdev->watchdog_timeo)) {
- SCHEDULE_WORK(&adapter->tx_timeout_task);
}
last_consumer = get_next_index(last_consumer,
adapter->max_tx_desc_count);
- count1++;
+ if (++count >= MAX_STATUS_HANDLE)
+ break;
}
- count2 = 0;
- spin_lock(&adapter->tx_lock);
- if ((--adapter->proc_cmd_buf_counter) == 0) {
+ if (count) {
adapter->last_cmd_consumer = last_consumer;
- while ((adapter->last_cmd_consumer != consumer)
- && (count2 < MAX_STATUS_HANDLE)) {
- buffer =
- &adapter->cmd_buf_arr[adapter->last_cmd_consumer];
- count2++;
- if (buffer->skb)
- break;
- else
- adapter->last_cmd_consumer =
- get_next_index(adapter->last_cmd_consumer,
- adapter->max_tx_desc_count);
- }
- }
- if (count1 || count2) {
- if (netif_queue_stopped(adapter->netdev)
- && (adapter->flags & NETXEN_NETDEV_STATUS)) {
- netif_wake_queue(adapter->netdev);
- adapter->flags &= ~NETXEN_NETDEV_STATUS;
+ smp_mb();
+ if (netif_queue_stopped(netdev) && netif_running(netdev)) {
+ netif_tx_lock(netdev);
+ netif_wake_queue(netdev);
+ smp_mb();
+ netif_tx_unlock(netdev);
}
}
/*
* There is still a possible race condition and the host could miss an
* interrupt. The card has to take care of this.
*/
- if (adapter->last_cmd_consumer == consumer &&
- (((adapter->cmd_producer + 1) %
- adapter->max_tx_desc_count) == adapter->last_cmd_consumer)) {
- consumer = le32_to_cpu(*(adapter->cmd_consumer));
- }
- done = (adapter->last_cmd_consumer == consumer);
+ consumer = le32_to_cpu(*(adapter->cmd_consumer));
+ done = (last_consumer == consumer);
- spin_unlock(&adapter->tx_lock);
- DPRINTK(INFO, "last consumer is %d in %s\n", last_consumer,
- __FUNCTION__);
return (done);
}
rcv_desc->begin_alloc = index;
rcv_desc->rcv_pending += count;
rcv_desc->producer = producer;
- if (rcv_desc->rcv_free >= 32) {
- rcv_desc->rcv_free = 0;
/* Window = 1 */
writel((producer - 1) &
(rcv_desc->max_rx_desc_count - 1),
writel(msg,
DB_NORMALIZE(adapter,
NETXEN_RCV_PRODUCER_OFFSET));
- wmb();
- }
}
}
rcv_desc->begin_alloc = index;
rcv_desc->rcv_pending += count;
rcv_desc->producer = producer;
- if (rcv_desc->rcv_free >= 32) {
- rcv_desc->rcv_free = 0;
/* Window = 1 */
writel((producer - 1) &
(rcv_desc->max_rx_desc_count - 1),
rcv_desc_crb[ringid].
crb_rcv_producer_offset));
wmb();
- }
}
}
-int netxen_nic_tx_has_work(struct netxen_adapter *adapter)
-{
- if (find_diff_among(adapter->last_cmd_consumer,
- adapter->cmd_producer,
- adapter->max_tx_desc_count) > 0)
- return 1;
-
- return 0;
-}
-
-
void netxen_nic_clear_stats(struct netxen_adapter *adapter)
{
memset(&adapter->stats, 0, sizeof(adapter->stats));
/* packet transmit problems */
stats->tx_errors = adapter->stats.nocmddescriptor;
/* no space in linux buffers */
- stats->rx_dropped = adapter->stats.updropped;
+ stats->rx_dropped = adapter->stats.rxdropped;
/* no space available in linux */
stats->tx_dropped = adapter->stats.txdropped;
void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- u32 val, val1;
+ u32 val;
/* WINDOW = 1 */
val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE));
val >>= (physical_port[adapter->portnum] * 8);
- val1 = val & 0xff;
+ val &= 0xff;
- if (adapter->ahw.xg_linkup == 1 && val1 != XG_LINK_UP) {
+ if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) {
printk(KERN_INFO "%s: %s NIC Link is down\n",
netxen_nic_driver_name, netdev->name);
adapter->ahw.xg_linkup = 0;
netif_carrier_off(netdev);
netif_stop_queue(netdev);
}
- /* read twice to clear sticky bits */
- /* WINDOW = 0 */
- netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val1);
- netxen_nic_read_w0(adapter, NETXEN_NIU_XG_STATUS, &val1);
-
- if ((val & 0xffb) != 0xffb) {
- printk(KERN_INFO "%s ISR: Sync/Align BAD: 0x%08x\n",
- netxen_nic_driver_name, val1);
- }
- } else if (adapter->ahw.xg_linkup == 0 && val1 == XG_LINK_UP) {
+ } else if (adapter->ahw.xg_linkup == 0 && val == XG_LINK_UP) {
printk(KERN_INFO "%s: %s NIC Link is up\n",
netxen_nic_driver_name, netdev->name);
adapter->ahw.xg_linkup = 1;
static void netxen_tx_timeout(struct net_device *netdev);
static void netxen_tx_timeout_task(struct work_struct *work);
static void netxen_watchdog(unsigned long);
-static int netxen_handle_int(struct netxen_adapter *, struct net_device *);
static int netxen_nic_poll(struct napi_struct *napi, int budget);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void netxen_nic_poll_controller(struct net_device *netdev);
#endif
static irqreturn_t netxen_intr(int irq, void *data);
+static irqreturn_t netxen_msi_intr(int irq, void *data);
int physical_port[] = {0, 1, 2, 3};
#define ADAPTER_LIST_SIZE 12
+static uint32_t msi_tgt_status[4] = {
+ ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1,
+ ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3
+};
+
+static uint32_t sw_int_mask[4] = {
+ CRB_SW_INT_MASK_0, CRB_SW_INT_MASK_1,
+ CRB_SW_INT_MASK_2, CRB_SW_INT_MASK_3
+};
+
static void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
- uint32_t mask = 0x7ff;
+ u32 mask = 0x7ff;
int retries = 32;
+ int port = adapter->portnum;
+ int pci_fn = adapter->ahw.pci_func;
- DPRINTK(1, INFO, "Entered ISR Disable \n");
-
- switch (adapter->portnum) {
- case 0:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x0, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
- }
+ if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
+ writel(0x0, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
if (adapter->intr_scheme != -1 &&
adapter->intr_scheme != INTR_SCHEME_PERPORT)
writel(mask,PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
- /* Window = 0 or 1 */
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
do {
writel(0xffffffff,
printk(KERN_NOTICE "%s: Failed to disable interrupt completely\n",
netxen_nic_driver_name);
}
+ } else {
+ if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
+ writel(0xffffffff, PCI_OFFSET_SECOND_RANGE(adapter,
+ msi_tgt_status[pci_fn]));
+ }
}
-
- DPRINTK(1, INFO, "Done with Disable Int\n");
}
static void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
u32 mask;
+ int port = adapter->portnum;
DPRINTK(1, INFO, "Entered ISR Enable \n");
writel(mask, PCI_OFFSET_SECOND_RANGE(adapter, ISR_INT_MASK));
}
- switch (adapter->portnum) {
- case 0:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_0));
- break;
- case 1:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_1));
- break;
- case 2:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_2));
- break;
- case 3:
- writel(0x1, NETXEN_CRB_NORMALIZE(adapter, CRB_SW_INT_MASK_3));
- break;
- }
+ writel(0x1, NETXEN_CRB_NORMALIZE(adapter, sw_int_mask[port]));
if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
mask = 0xbff;
adapter->ahw.pdev = pdev;
adapter->ahw.pci_func = pci_func_id;
- spin_lock_init(&adapter->tx_lock);
/* remap phys address */
mem_base = pci_resource_start(pdev, 0); /* 0 is for BAR 0 */
/* this will be read from FW later */
adapter->intr_scheme = -1;
+ adapter->msi_mode = -1;
/* This will be reset for mezz cards */
adapter->portnum = pci_func_id;
netdev->set_mac_address = netxen_nic_set_mac;
netdev->change_mtu = netxen_nic_change_mtu;
netdev->tx_timeout = netxen_tx_timeout;
- netdev->watchdog_timeo = HZ;
+ netdev->watchdog_timeo = 2*HZ;
netxen_nic_change_mtu(netdev, netdev->mtu);
adapter->watchdog_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
adapter->ahw.pdev = pdev;
- adapter->proc_cmd_buf_counter = 0;
adapter->ahw.revision_id = pdev->revision;
/* make sure Window == 1 */
struct netxen_adapter *adapter = (struct netxen_adapter *)netdev->priv;
int err = 0;
int ctx, ring;
+ irq_handler_t handler;
+ unsigned long flags = IRQF_SAMPLE_RANDOM;
if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) {
err = netxen_init_firmware(adapter);
netxen_post_rx_buffers(adapter, ctx, ring);
}
adapter->irq = adapter->ahw.pdev->irq;
- err = request_irq(adapter->ahw.pdev->irq, netxen_intr,
- IRQF_SHARED|IRQF_SAMPLE_RANDOM, netdev->name,
- adapter);
+ if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
+ handler = netxen_msi_intr;
+ else {
+ flags |= IRQF_SHARED;
+ handler = netxen_intr;
+ }
+ err = request_irq(adapter->irq, handler,
+ flags, netdev->name, adapter);
if (err) {
printk(KERN_ERR "request_irq failed with: %d\n", err);
netxen_free_hw_resources(adapter);
adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
}
- if (!adapter->driver_mismatch)
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- napi_enable(&adapter->napi);
-
- netxen_nic_enable_int(adapter);
-
/* Done here again so that even if phantom sw overwrote it,
* we set it */
if (adapter->init_port
&& adapter->init_port(adapter, adapter->portnum) != 0) {
- del_timer_sync(&adapter->watchdog_timer);
printk(KERN_ERR "%s: Failed to initialize port %d\n",
netxen_nic_driver_name, adapter->portnum);
- napi_disable(&adapter->napi);
return -EIO;
}
if (adapter->macaddr_set)
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
+ if (!adapter->driver_mismatch)
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+ napi_enable(&adapter->napi);
+ netxen_nic_enable_int(adapter);
+
if (!adapter->driver_mismatch)
netif_start_queue(netdev);
struct netxen_skb_frag *buffrag;
unsigned int i;
- u32 producer = 0;
+ u32 producer, consumer;
u32 saved_producer = 0;
struct cmd_desc_type0 *hwdesc;
int k;
struct netxen_cmd_buffer *pbuf = NULL;
- static int dropped_packet = 0;
int frag_count;
- u32 local_producer = 0;
- u32 max_tx_desc_count = 0;
- u32 last_cmd_consumer = 0;
int no_of_desc;
+ u32 num_txd = adapter->max_tx_desc_count;
- adapter->stats.xmitcalled++;
frag_count = skb_shinfo(skb)->nr_frags + 1;
- if (unlikely(skb->len <= 0)) {
- dev_kfree_skb_any(skb);
- adapter->stats.badskblen++;
- return NETDEV_TX_OK;
- }
-
- if (frag_count > MAX_BUFFERS_PER_CMD) {
- printk("%s: %s netxen_nic_xmit_frame: frag_count (%d) "
- "too large, can handle only %d frags\n",
- netxen_nic_driver_name, netdev->name,
- frag_count, MAX_BUFFERS_PER_CMD);
- adapter->stats.txdropped++;
- if ((++dropped_packet & 0xff) == 0xff)
- printk("%s: %s droppped packets = %d\n",
- netxen_nic_driver_name, netdev->name,
- dropped_packet);
-
- return NETDEV_TX_OK;
- }
-
/* There 4 fragments per descriptor */
no_of_desc = (frag_count + 3) >> 2;
if (netdev->features & NETIF_F_TSO) {
}
}
- spin_lock_bh(&adapter->tx_lock);
- if (adapter->total_threads >= MAX_XMIT_PRODUCERS) {
- goto out_requeue;
- }
- local_producer = adapter->cmd_producer;
- k = adapter->cmd_producer;
- max_tx_desc_count = adapter->max_tx_desc_count;
- last_cmd_consumer = adapter->last_cmd_consumer;
- if ((k + no_of_desc) >=
- ((last_cmd_consumer <= k) ? last_cmd_consumer + max_tx_desc_count :
- last_cmd_consumer)) {
- goto out_requeue;
+ producer = adapter->cmd_producer;
+ smp_mb();
+ consumer = adapter->last_cmd_consumer;
+ if ((no_of_desc+2) > find_diff_among(producer, consumer, num_txd)) {
+ netif_stop_queue(netdev);
+ smp_mb();
+ return NETDEV_TX_BUSY;
}
- k = get_index_range(k, max_tx_desc_count, no_of_desc);
- adapter->cmd_producer = k;
- adapter->total_threads++;
- adapter->num_threads++;
- spin_unlock_bh(&adapter->tx_lock);
/* Copy the descriptors into the hardware */
- producer = local_producer;
saved_producer = producer;
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
/* move to next desc. if there is a need */
if ((i & 0x3) == 0) {
k = 0;
- producer = get_next_index(producer,
- adapter->max_tx_desc_count);
+ producer = get_next_index(producer, num_txd);
hwdesc = &hw->cmd_desc_head[producer];
memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
pbuf = &adapter->cmd_buf_arr[producer];
buffrag->dma = temp_dma;
buffrag->length = temp_len;
- DPRINTK(INFO, "for loop. i=%d k=%d\n", i, k);
switch (k) {
case 0:
hwdesc->buffer1_length = cpu_to_le16(temp_len);
}
frag++;
}
- producer = get_next_index(producer, adapter->max_tx_desc_count);
+ producer = get_next_index(producer, num_txd);
/* might change opcode to TX_TCP_LSO */
netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
/* copy the first 64 bytes */
memcpy(((void *)hwdesc) + 2,
(void *)(skb->data), first_hdr_len);
- producer = get_next_index(producer, max_tx_desc_count);
+ producer = get_next_index(producer, num_txd);
if (more_hdr) {
hwdesc = &hw->cmd_desc_head[producer];
hwdesc,
(hdr_len -
first_hdr_len));
- producer = get_next_index(producer, max_tx_desc_count);
+ producer = get_next_index(producer, num_txd);
}
}
- spin_lock_bh(&adapter->tx_lock);
+ adapter->cmd_producer = producer;
adapter->stats.txbytes += skb->len;
- /* Code to update the adapter considering how many producer threads
- are currently working */
- if ((--adapter->num_threads) == 0) {
- /* This is the last thread */
- u32 crb_producer = adapter->cmd_producer;
- netxen_nic_update_cmd_producer(adapter, crb_producer);
- wmb();
- adapter->total_threads = 0;
- }
+ netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
- adapter->stats.xmitfinished++;
+ adapter->stats.xmitcalled++;
netdev->trans_start = jiffies;
- spin_unlock_bh(&adapter->tx_lock);
return NETDEV_TX_OK;
-
-out_requeue:
- netif_stop_queue(netdev);
- adapter->flags |= NETXEN_NETDEV_STATUS;
-
- spin_unlock_bh(&adapter->tx_lock);
- return NETDEV_TX_BUSY;
}
static void netxen_watchdog(unsigned long v)
printk(KERN_ERR "%s %s: transmit timeout, resetting.\n",
netxen_nic_driver_name, adapter->netdev->name);
- netxen_nic_close(adapter->netdev);
- netxen_nic_open(adapter->netdev);
+ netxen_nic_disable_int(adapter);
+ napi_disable(&adapter->napi);
+
adapter->netdev->trans_start = jiffies;
+
+ napi_enable(&adapter->napi);
+ netxen_nic_enable_int(adapter);
netif_wake_queue(adapter->netdev);
}
-static int
-netxen_handle_int(struct netxen_adapter *adapter, struct net_device *netdev)
+static inline void
+netxen_handle_int(struct netxen_adapter *adapter)
{
- u32 ret = 0;
-
- DPRINTK(INFO, "Entered handle ISR\n");
- adapter->stats.ints++;
-
netxen_nic_disable_int(adapter);
-
- if (netxen_nic_rx_has_work(adapter) || netxen_nic_tx_has_work(adapter)) {
- if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
- /*
- * Interrupts are already disabled.
- */
- __netif_rx_schedule(netdev, &adapter->napi);
- } else {
- static unsigned int intcount = 0;
- if ((++intcount & 0xfff) == 0xfff)
- DPRINTK(KERN_ERR
- "%s: %s interrupt %d while in poll\n",
- netxen_nic_driver_name, netdev->name,
- intcount);
- }
- ret = 1;
- }
-
- if (ret == 0) {
- netxen_nic_enable_int(adapter);
- }
-
- return ret;
+ napi_schedule(&adapter->napi);
}
-/*
- * netxen_intr - Interrupt Handler
- * @irq: interrupt number
- * data points to adapter stucture (which may be handling more than 1 port
- */
irqreturn_t netxen_intr(int irq, void *data)
{
struct netxen_adapter *adapter = data;
- struct net_device *netdev = adapter->netdev;
u32 our_int = 0;
- if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
- our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
- /* not our interrupt */
- if ((our_int & (0x80 << adapter->portnum)) == 0)
- return IRQ_NONE;
- }
+ our_int = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
+ /* not our interrupt */
+ if ((our_int & (0x80 << adapter->portnum)) == 0)
+ return IRQ_NONE;
if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
/* claim interrupt */
- if (!(adapter->flags & NETXEN_NIC_MSI_ENABLED)) {
- writel(our_int & ~((u32)(0x80 << adapter->portnum)),
+ writel(our_int & ~((u32)(0x80 << adapter->portnum)),
NETXEN_CRB_NORMALIZE(adapter, CRB_INT_VECTOR));
- }
}
- if (netif_running(netdev))
- netxen_handle_int(adapter, netdev);
+ netxen_handle_int(adapter);
return IRQ_HANDLED;
}
+irqreturn_t netxen_msi_intr(int irq, void *data)
+{
+ struct netxen_adapter *adapter = data;
+
+ netxen_handle_int(adapter);
+ return IRQ_HANDLED;
+}
+
static int netxen_nic_poll(struct napi_struct *napi, int budget)
{
struct netxen_adapter *adapter = container_of(napi, struct netxen_adapter, napi);
- struct net_device *netdev = adapter->netdev;
- int done = 1;
+ int tx_complete;
int ctx;
int work_done;
- DPRINTK(INFO, "polling for %d descriptors\n", *budget);
+ tx_complete = netxen_process_cmd_ring(adapter);
work_done = 0;
for (ctx = 0; ctx < MAX_RCV_CTX; ++ctx) {
budget / MAX_RCV_CTX);
}
- if (work_done >= budget)
- done = 0;
-
- if (netxen_process_cmd_ring((unsigned long)adapter) == 0)
- done = 0;
-
- DPRINTK(INFO, "new work_done: %d work_to_do: %d\n",
- work_done, work_to_do);
- if (done) {
- netif_rx_complete(netdev, napi);
+ if ((work_done < budget) && tx_complete) {
+ netif_rx_complete(adapter->netdev, &adapter->napi);
netxen_nic_enable_int(adapter);
}
*/
#define CRB_NIC_CAPABILITIES_HOST NETXEN_NIC_REG(0x1a8)
#define CRB_NIC_CAPABILITIES_FW NETXEN_NIC_REG(0x1dc)
+#define CRB_NIC_MSI_MODE_HOST NETXEN_NIC_REG(0x270)
+#define CRB_NIC_MSI_MODE_FW NETXEN_NIC_REG(0x274)
#define INTR_SCHEME_PERPORT 0x1
+#define MSI_MODE_MULTIFUNC 0x1
/* used for ethtool tests */
#define CRB_SCRATCHPAD_TEST NETXEN_NIC_REG(0x280)
* - Multiqueue RX/TX
*/
-
-/* Must be a power of two */
-#define RX_RING_SIZE 2048
-#define TX_RING_SIZE 4096
-
#define LRO_MAX_AGGR 64
#define PE_MIN_MTU 64
-#define PE_MAX_MTU 1500
+#define PE_MAX_MTU 9000
#define PE_DEF_MTU ETH_DATA_LEN
#define DEFAULT_MSG_ENABLE \
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
-#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
-#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
-#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
-#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
-#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
-
-#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
- & ((ring)->size - 1))
-#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "PA Semi MAC bitmapped debugging message enable value");
+extern const struct ethtool_ops pasemi_mac_ethtool_ops;
+
static int translation_enabled(void)
{
#if defined(CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE)
return (nfrags + 3) & ~1;
}
+static struct pasemi_mac_csring *pasemi_mac_setup_csring(struct pasemi_mac *mac)
+{
+ struct pasemi_mac_csring *ring;
+ u32 val;
+ unsigned int cfg;
+ int chno;
+
+ ring = pasemi_dma_alloc_chan(TXCHAN, sizeof(struct pasemi_mac_csring),
+ offsetof(struct pasemi_mac_csring, chan));
+
+ if (!ring) {
+ dev_err(&mac->pdev->dev, "Can't allocate checksum channel\n");
+ goto out_chan;
+ }
+
+ chno = ring->chan.chno;
+
+ ring->size = CS_RING_SIZE;
+ ring->next_to_fill = 0;
+
+ /* Allocate descriptors */
+ if (pasemi_dma_alloc_ring(&ring->chan, CS_RING_SIZE))
+ goto out_ring_desc;
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEL(chno),
+ PAS_DMA_TXCHAN_BASEL_BRBL(ring->chan.ring_dma));
+ val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->chan.ring_dma >> 32);
+ val |= PAS_DMA_TXCHAN_BASEU_SIZ(CS_RING_SIZE >> 3);
+
+ write_dma_reg(PAS_DMA_TXCHAN_BASEU(chno), val);
+
+ ring->events[0] = pasemi_dma_alloc_flag();
+ ring->events[1] = pasemi_dma_alloc_flag();
+ if (ring->events[0] < 0 || ring->events[1] < 0)
+ goto out_flags;
+
+ pasemi_dma_clear_flag(ring->events[0]);
+ pasemi_dma_clear_flag(ring->events[1]);
+
+ ring->fun = pasemi_dma_alloc_fun();
+ if (ring->fun < 0)
+ goto out_fun;
+
+ cfg = PAS_DMA_TXCHAN_CFG_TY_FUNC | PAS_DMA_TXCHAN_CFG_UP |
+ PAS_DMA_TXCHAN_CFG_TATTR(ring->fun) |
+ PAS_DMA_TXCHAN_CFG_LPSQ | PAS_DMA_TXCHAN_CFG_LPDQ;
+
+ if (translation_enabled())
+ cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
+
+ write_dma_reg(PAS_DMA_TXCHAN_CFG(chno), cfg);
+
+ /* enable channel */
+ pasemi_dma_start_chan(&ring->chan, PAS_DMA_TXCHAN_TCMDSTA_SZ |
+ PAS_DMA_TXCHAN_TCMDSTA_DB |
+ PAS_DMA_TXCHAN_TCMDSTA_DE |
+ PAS_DMA_TXCHAN_TCMDSTA_DA);
+
+ return ring;
+
+out_fun:
+out_flags:
+ if (ring->events[0] >= 0)
+ pasemi_dma_free_flag(ring->events[0]);
+ if (ring->events[1] >= 0)
+ pasemi_dma_free_flag(ring->events[1]);
+ pasemi_dma_free_ring(&ring->chan);
+out_ring_desc:
+ pasemi_dma_free_chan(&ring->chan);
+out_chan:
+
+ return NULL;
+}
+
+static void pasemi_mac_setup_csrings(struct pasemi_mac *mac)
+{
+ int i;
+ mac->cs[0] = pasemi_mac_setup_csring(mac);
+ if (mac->type == MAC_TYPE_XAUI)
+ mac->cs[1] = pasemi_mac_setup_csring(mac);
+ else
+ mac->cs[1] = 0;
+
+ for (i = 0; i < MAX_CS; i++)
+ if (mac->cs[i])
+ mac->num_cs++;
+}
+
+static void pasemi_mac_free_csring(struct pasemi_mac_csring *csring)
+{
+ pasemi_dma_stop_chan(&csring->chan);
+ pasemi_dma_free_flag(csring->events[0]);
+ pasemi_dma_free_flag(csring->events[1]);
+ pasemi_dma_free_ring(&csring->chan);
+ pasemi_dma_free_chan(&csring->chan);
+ pasemi_dma_free_fun(csring->fun);
+}
+
static int pasemi_mac_setup_rx_resources(const struct net_device *dev)
{
struct pasemi_mac_rxring *ring;
cfg = PAS_DMA_TXCHAN_CFG_TY_IFACE |
PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
PAS_DMA_TXCHAN_CFG_UP |
- PAS_DMA_TXCHAN_CFG_WT(2);
+ PAS_DMA_TXCHAN_CFG_WT(4);
if (translation_enabled())
cfg |= PAS_DMA_TXCHAN_CFG_TRD | PAS_DMA_TXCHAN_CFG_TRR;
u64 mactx = TX_DESC(txring, i);
struct sk_buff *skb;
- skb = TX_DESC_INFO(txring, i+1).skb;
- nr_frags = TX_DESC_INFO(txring, i).dma;
-
if ((mactx & XCT_MACTX_E) ||
(*chan->status & PAS_STATUS_ERROR))
pasemi_mac_tx_error(mac, mactx);
+ /* Skip over control descriptors */
+ if (!(mactx & XCT_MACTX_LLEN_M)) {
+ TX_DESC(txring, i) = 0;
+ TX_DESC(txring, i+1) = 0;
+ buf_count = 2;
+ continue;
+ }
+
+ skb = TX_DESC_INFO(txring, i+1).skb;
+ nr_frags = TX_DESC_INFO(txring, i).dma;
+
if (unlikely(mactx & XCT_MACTX_O))
/* Not yet transmitted */
break;
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int flags;
- int ret;
-
- /* enable rx section */
- write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
-
- /* enable tx section */
- write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+ int i, ret;
flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
if (!mac->tx)
goto out_tx_ring;
+ /* We might already have allocated rings in case mtu was changed
+ * before interface was brought up.
+ */
+ if (dev->mtu > 1500 && !mac->num_cs) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs)
+ goto out_tx_ring;
+ }
+
+ /* Zero out rmon counters */
+ for (i = 0; i < 32; i++)
+ write_mac_reg(mac, PAS_MAC_RMON(i), 0);
+
/* 0x3ff with 33MHz clock is about 31us */
write_iob_reg(PAS_IOB_DMA_COM_TIMEOUTCFG,
PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0x3ff));
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int sta;
- int rxch, txch;
+ int rxch, txch, i;
rxch = rx_ring(mac)->chan.chno;
txch = tx_ring(mac)->chan.chno;
free_irq(mac->tx->chan.irq, mac->tx);
free_irq(mac->rx->chan.irq, mac->rx);
+ for (i = 0; i < mac->num_cs; i++) {
+ pasemi_mac_free_csring(mac->cs[i]);
+ mac->cs[i] = NULL;
+ }
+
+ mac->num_cs = 0;
+
/* Free resources */
pasemi_mac_free_rx_resources(mac);
pasemi_mac_free_tx_resources(mac);
return 0;
}
+static void pasemi_mac_queue_csdesc(const struct sk_buff *skb,
+ const dma_addr_t *map,
+ const unsigned int *map_size,
+ struct pasemi_mac_txring *txring,
+ struct pasemi_mac_csring *csring)
+{
+ u64 fund;
+ dma_addr_t cs_dest;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
+ const int nfrags = skb_shinfo(skb)->nr_frags;
+ int cs_size, i, fill, hdr, cpyhdr, evt;
+ dma_addr_t csdma;
+
+ fund = XCT_FUN_ST | XCT_FUN_RR_8BRES |
+ XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_CRM_SIG | XCT_FUN_LLEN(skb->len - nh_off) |
+ XCT_FUN_SHL(nh_len >> 2) | XCT_FUN_SE;
+
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ fund |= XCT_FUN_SIG_TCP4;
+ /* TCP checksum is 16 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 16;
+ break;
+ case IPPROTO_UDP:
+ fund |= XCT_FUN_SIG_UDP4;
+ /* UDP checksum is 6 bytes into the header */
+ cs_dest = map[0] + skb_transport_offset(skb) + 6;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Do the checksum offloaded */
+ fill = csring->next_to_fill;
+ hdr = fill;
+
+ CS_DESC(csring, fill++) = fund;
+ /* Room for 8BRES. Checksum result is really 2 bytes into it */
+ csdma = csring->chan.ring_dma + (fill & (CS_RING_SIZE-1)) * 8 + 2;
+ CS_DESC(csring, fill++) = 0;
+
+ CS_DESC(csring, fill) = XCT_PTR_LEN(map_size[0]-nh_off) | XCT_PTR_ADDR(map[0]+nh_off);
+ for (i = 1; i <= nfrags; i++)
+ CS_DESC(csring, fill+i) = XCT_PTR_LEN(map_size[i]) | XCT_PTR_ADDR(map[i]);
+
+ fill += i;
+ if (fill & 1)
+ fill++;
+
+ /* Copy the result into the TCP packet */
+ cpyhdr = fill;
+ CS_DESC(csring, fill++) = XCT_FUN_O | XCT_FUN_FUN(csring->fun) |
+ XCT_FUN_LLEN(2) | XCT_FUN_SE;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(cs_dest) | XCT_PTR_T;
+ CS_DESC(csring, fill++) = XCT_PTR_LEN(2) | XCT_PTR_ADDR(csdma);
+ fill++;
+
+ evt = !csring->last_event;
+ csring->last_event = evt;
+
+ /* Event handshaking with MAC TX */
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_SET | CTRL_CMD_REG(csring->events[evt]);
+ CS_DESC(csring, fill++) = 0;
+ CS_DESC(csring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WCLR | CTRL_CMD_REG(csring->events[!evt]);
+ CS_DESC(csring, fill++) = 0;
+ csring->next_to_fill = fill & (CS_RING_SIZE-1);
+
+ cs_size = fill - hdr;
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(csring->chan.chno), (cs_size) >> 1);
+
+ /* TX-side event handshaking */
+ fill = txring->next_to_fill;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_WSET | CTRL_CMD_REG(csring->events[evt]);
+ TX_DESC(txring, fill++) = 0;
+ TX_DESC(txring, fill++) = CTRL_CMD_T | CTRL_CMD_META_EVT | CTRL_CMD_O |
+ CTRL_CMD_ETYPE_CLR | CTRL_CMD_REG(csring->events[!evt]);
+ TX_DESC(txring, fill++) = 0;
+ txring->next_to_fill = fill;
+
+ write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2);
+
+ return;
+}
+
static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct pasemi_mac *mac = netdev_priv(dev);
- struct pasemi_mac_txring *txring;
- u64 dflags, mactx;
+ struct pasemi_mac * const mac = netdev_priv(dev);
+ struct pasemi_mac_txring * const txring = tx_ring(mac);
+ struct pasemi_mac_csring *csring;
+ u64 dflags = 0;
+ u64 mactx;
dma_addr_t map[MAX_SKB_FRAGS+1];
unsigned int map_size[MAX_SKB_FRAGS+1];
unsigned long flags;
int i, nfrags;
int fill;
+ const int nh_off = skb_network_offset(skb);
+ const int nh_len = skb_network_header_len(skb);
- dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
-
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- const unsigned char *nh = skb_network_header(skb);
+ prefetch(&txring->ring_info);
- switch (ip_hdr(skb)->protocol) {
- case IPPROTO_TCP:
- dflags |= XCT_MACTX_CSUM_TCP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- case IPPROTO_UDP:
- dflags |= XCT_MACTX_CSUM_UDP;
- dflags |= XCT_MACTX_IPH(skb_network_header_len(skb) >> 2);
- dflags |= XCT_MACTX_IPO(nh - skb->data);
- break;
- }
- }
+ dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_CRC_PAD;
nfrags = skb_shinfo(skb)->nr_frags;
}
}
- mactx = dflags | XCT_MACTX_LLEN(skb->len);
+ if (skb->ip_summed == CHECKSUM_PARTIAL && skb->len <= 1540) {
+ switch (ip_hdr(skb)->protocol) {
+ case IPPROTO_TCP:
+ dflags |= XCT_MACTX_CSUM_TCP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ case IPPROTO_UDP:
+ dflags |= XCT_MACTX_CSUM_UDP;
+ dflags |= XCT_MACTX_IPH(nh_len >> 2);
+ dflags |= XCT_MACTX_IPO(nh_off);
+ break;
+ default:
+ WARN_ON(1);
+ }
+ }
- txring = tx_ring(mac);
+ mactx = dflags | XCT_MACTX_LLEN(skb->len);
spin_lock_irqsave(&txring->lock, flags);
- fill = txring->next_to_fill;
-
/* Avoid stepping on the same cache line that the DMA controller
* is currently about to send, so leave at least 8 words available.
* Total free space needed is mactx + fragments + 8
*/
- if (RING_AVAIL(txring) < nfrags + 10) {
+ if (RING_AVAIL(txring) < nfrags + 14) {
/* no room -- stop the queue and wait for tx intr */
netif_stop_queue(dev);
goto out_err;
}
+ /* Queue up checksum + event descriptors, if needed */
+ if (mac->num_cs && skb->ip_summed == CHECKSUM_PARTIAL && skb->len > 1540) {
+ csring = mac->cs[mac->last_cs];
+ mac->last_cs = (mac->last_cs + 1) % mac->num_cs;
+
+ pasemi_mac_queue_csdesc(skb, map, map_size, txring, csring);
+ }
+
+ fill = txring->next_to_fill;
TX_DESC(txring, fill) = mactx;
TX_DESC_INFO(txring, fill).dma = nfrags;
fill++;
return pkts;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void pasemi_mac_netpoll(struct net_device *dev)
+{
+ const struct pasemi_mac *mac = netdev_priv(dev);
+
+ disable_irq(mac->tx->chan.irq);
+ pasemi_mac_tx_intr(mac->tx->chan.irq, mac->tx);
+ enable_irq(mac->tx->chan.irq);
+
+ disable_irq(mac->rx->chan.irq);
+ pasemi_mac_rx_intr(mac->rx->chan.irq, mac->rx);
+ enable_irq(mac->rx->chan.irq);
+}
+#endif
+
static int pasemi_mac_change_mtu(struct net_device *dev, int new_mtu)
{
struct pasemi_mac *mac = netdev_priv(dev);
unsigned int reg;
- unsigned int rcmdsta;
+ unsigned int rcmdsta = 0;
int running;
+ int ret = 0;
if (new_mtu < PE_MIN_MTU || new_mtu > PE_MAX_MTU)
return -EINVAL;
pasemi_mac_pause_rxint(mac);
pasemi_mac_clean_rx(rx_ring(mac), RX_RING_SIZE);
pasemi_mac_free_rx_buffers(mac);
+
+ }
+
+ /* Setup checksum channels if large MTU and none already allocated */
+ if (new_mtu > 1500 && !mac->num_cs) {
+ pasemi_mac_setup_csrings(mac);
+ if (!mac->num_cs) {
+ ret = -ENOMEM;
+ goto out;
+ }
}
/* Change maxf, i.e. what size frames are accepted.
/* MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
mac->bufsz = new_mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+out:
if (running) {
write_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
rcmdsta | PAS_DMA_RXINT_RCMDSTA_EN);
pasemi_mac_intf_enable(mac);
}
- return 0;
+ return ret;
}
static int __devinit
netif_napi_add(dev, &mac->napi, pasemi_mac_poll, 64);
dev->features = NETIF_F_IP_CSUM | NETIF_F_LLTX | NETIF_F_SG |
- NETIF_F_HIGHDMA;
+ NETIF_F_HIGHDMA | NETIF_F_GSO;
mac->lro_mgr.max_aggr = LRO_MAX_AGGR;
mac->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS;
dev->mtu = PE_DEF_MTU;
/* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
mac->bufsz = dev->mtu + ETH_HLEN + ETH_FCS_LEN + LOCAL_SKB_ALIGN + 128;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = pasemi_mac_netpoll;
+#endif
dev->change_mtu = pasemi_mac_change_mtu;
+ dev->ethtool_ops = &pasemi_mac_ethtool_ops;
if (err)
goto out;
#include <linux/spinlock.h>
#include <linux/phy.h>
+/* Must be a power of two */
+#define RX_RING_SIZE 2048
+#define TX_RING_SIZE 4096
+#define CS_RING_SIZE (TX_RING_SIZE*2)
+
+
#define MAX_LRO_DESCRIPTORS 8
+#define MAX_CS 2
struct pasemi_mac_txring {
struct pasemi_dmachan chan; /* Must be first */
struct pasemi_mac *mac; /* Needed in intr handler */
};
+struct pasemi_mac_csring {
+ struct pasemi_dmachan chan;
+ unsigned int size;
+ unsigned int next_to_fill;
+ int events[2];
+ int last_event;
+ int fun;
+};
+
struct pasemi_mac {
struct net_device *netdev;
struct pci_dev *pdev;
struct napi_struct napi;
int bufsz; /* RX ring buffer size */
+ int last_cs;
+ int num_cs;
+ u32 dma_if;
u8 type;
#define MAC_TYPE_GMAC 1
#define MAC_TYPE_XAUI 2
- u32 dma_if;
u8 mac_addr[6];
struct pasemi_mac_txring *tx;
struct pasemi_mac_rxring *rx;
+ struct pasemi_mac_csring *cs[MAX_CS];
char tx_irq_name[10]; /* "eth%d tx" */
char rx_irq_name[10]; /* "eth%d rx" */
int link;
dma_addr_t dma;
};
+#define TX_DESC(tx, num) ((tx)->chan.ring_virt[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(tx, num) ((tx)->ring_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(rx, num) ((rx)->chan.ring_virt[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(rx, num) ((rx)->ring_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(rx, num) ((rx)->buffers[(num) & (RX_RING_SIZE-1)])
+#define CS_DESC(cs, num) ((cs)->chan.ring_virt[(num) & (CS_RING_SIZE-1)])
+
+#define RING_USED(ring) (((ring)->next_to_fill - (ring)->next_to_clean) \
+ & ((ring)->size - 1))
+#define RING_AVAIL(ring) ((ring->size) - RING_USED(ring))
/* PCI register offsets and formats */
PAS_MAC_CFG_ADR0 = 0x8c,
PAS_MAC_CFG_ADR1 = 0x90,
PAS_MAC_CFG_TXP = 0x98,
+ PAS_MAC_CFG_RMON = 0x100,
PAS_MAC_IPC_CHNL = 0x208,
};
#define PAS_MAC_CFG_TXP_TIFG(x) (((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
PAS_MAC_CFG_TXP_TIFG_M)
+#define PAS_MAC_RMON(r) (0x100+(r)*4)
+
#define PAS_MAC_IPC_CHNL_DCHNO_M 0x003f0000
#define PAS_MAC_IPC_CHNL_DCHNO_S 16
#define PAS_MAC_IPC_CHNL_DCHNO(x) (((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
#define PAS_MAC_IPC_CHNL_BCH(x) (((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
PAS_MAC_IPC_CHNL_BCH_M)
+
#endif /* PASEMI_MAC_H */
--- /dev/null
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Ethtool hooks for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/inet_lro.h>
+
+#include <asm/pasemi_dma.h>
+#include "pasemi_mac.h"
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "rx-drops" },
+ { "rx-bytes" },
+ { "rx-packets" },
+ { "rx-broadcast-packets" },
+ { "rx-multicast-packets" },
+ { "rx-crc-errors" },
+ { "rx-undersize-errors" },
+ { "rx-oversize-errors" },
+ { "rx-short-fragment-errors" },
+ { "rx-jabber-errors" },
+ { "rx-64-byte-packets" },
+ { "rx-65-127-byte-packets" },
+ { "rx-128-255-byte-packets" },
+ { "rx-256-511-byte-packets" },
+ { "rx-512-1023-byte-packets" },
+ { "rx-1024-1518-byte-packets" },
+ { "rx-pause-frames" },
+ { "tx-bytes" },
+ { "tx-packets" },
+ { "tx-broadcast-packets" },
+ { "tx-multicast-packets" },
+ { "tx-collisions" },
+ { "tx-late-collisions" },
+ { "tx-excessive-collisions" },
+ { "tx-crc-errors" },
+ { "tx-undersize-errors" },
+ { "tx-oversize-errors" },
+ { "tx-64-byte-packets" },
+ { "tx-65-127-byte-packets" },
+ { "tx-128-255-byte-packets" },
+ { "tx-256-511-byte-packets" },
+ { "tx-512-1023-byte-packets" },
+ { "tx-1024-1518-byte-packets" },
+};
+
+static int
+pasemi_mac_ethtool_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *cmd)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ struct phy_device *phydev = mac->phydev;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static void
+pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct pasemi_mac *mac;
+ mac = netdev_priv(netdev);
+
+ /* clear and fill out info */
+ memset(drvinfo, 0, sizeof(struct ethtool_drvinfo));
+ strncpy(drvinfo->driver, "pasemi_mac", 12);
+ strcpy(drvinfo->version, "N/A");
+ strcpy(drvinfo->fw_version, "N/A");
+ strncpy(drvinfo->bus_info, pci_name(mac->pdev), 32);
+}
+
+static u32
+pasemi_mac_ethtool_get_msglevel(struct net_device *netdev)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ return mac->msg_enable;
+}
+
+static void
+pasemi_mac_ethtool_set_msglevel(struct net_device *netdev,
+ u32 level)
+{
+ struct pasemi_mac *mac = netdev_priv(netdev);
+ mac->msg_enable = level;
+}
+
+
+static void
+pasemi_mac_ethtool_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ering)
+{
+ struct pasemi_mac *mac = netdev->priv;
+
+ ering->tx_max_pending = TX_RING_SIZE/2;
+ ering->tx_pending = RING_USED(mac->tx)/2;
+ ering->rx_max_pending = RX_RING_SIZE/4;
+ ering->rx_pending = RING_USED(mac->rx)/4;
+}
+
+static int pasemi_mac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(ethtool_stats_keys);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void pasemi_mac_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct pasemi_mac *mac = netdev->priv;
+ int i;
+
+ data[0] = pasemi_read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if))
+ >> PAS_DMA_RXINT_RCMDSTA_DROPS_S;
+ for (i = 0; i < 32; i++)
+ data[1+i] = pasemi_read_mac_reg(mac->dma_if, PAS_MAC_RMON(i));
+}
+
+static void pasemi_mac_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
+}
+
+const struct ethtool_ops pasemi_mac_ethtool_ops = {
+ .get_settings = pasemi_mac_ethtool_get_settings,
+ .get_drvinfo = pasemi_mac_ethtool_get_drvinfo,
+ .get_msglevel = pasemi_mac_ethtool_get_msglevel,
+ .set_msglevel = pasemi_mac_ethtool_set_msglevel,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = pasemi_mac_ethtool_get_ringparam,
+ .get_strings = pasemi_mac_get_strings,
+ .get_sset_count = pasemi_mac_get_sset_count,
+ .get_ethtool_stats = pasemi_mac_get_ethtool_stats,
+};
+
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
#define MII_M1111_PHY_EXT_SR 0x1b
-#define MII_M1111_HWCFG_MODE_MASK 0xf
-#define MII_M1111_HWCFG_MODE_RGMII 0xb
+
+#define MII_M1111_HWCFG_MODE_MASK 0xf
+#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
+#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
+#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
+
+#define MII_M1111_COPPER 0
+#define MII_M1111_FIBER 1
+
+#define MII_M1011_PHY_STATUS 0x11
+#define MII_M1011_PHY_STATUS_1000 0x8000
+#define MII_M1011_PHY_STATUS_100 0x4000
+#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
+#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
+#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
+#define MII_M1011_PHY_STATUS_LINK 0x0400
+
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
+ int temp;
+ int mode;
+
+ /* Enable Fiber/Copper auto selection */
+ temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
+ temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp |= BMCR_RESET;
+ phy_write(phydev, MII_BMCR, temp);
if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
(phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
- int temp;
temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK);
- temp |= MII_M1111_HWCFG_MODE_RGMII;
+
+ mode = phy_read(phydev, MII_M1111_PHY_EXT_CR);
+
+ if (mode & MII_M1111_HWCFG_FIBER_COPPER_RES)
+ temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
+ else
+ temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
}
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
- int temp;
-
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
return 0;
}
+/* marvell_read_status
+ *
+ * Generic status code does not detect Fiber correctly!
+ * Description:
+ * Check the link, then figure out the current state
+ * by comparing what we advertise with what the link partner
+ * advertises. Start by checking the gigabit possibilities,
+ * then move on to 10/100.
+ */
+static int marvell_read_status(struct phy_device *phydev)
+{
+ int adv;
+ int err;
+ int lpa;
+ int status = 0;
+
+ /* Update the link, but return if there
+ * was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ if (AUTONEG_ENABLE == phydev->autoneg) {
+ status = phy_read(phydev, MII_M1011_PHY_STATUS);
+ if (status < 0)
+ return status;
+
+ lpa = phy_read(phydev, MII_LPA);
+ if (lpa < 0)
+ return lpa;
+
+ adv = phy_read(phydev, MII_ADVERTISE);
+ if (adv < 0)
+ return adv;
+
+ lpa &= adv;
+
+ if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ status = status & MII_M1011_PHY_STATUS_SPD_MASK;
+ phydev->pause = phydev->asym_pause = 0;
+
+ switch (status) {
+ case MII_M1011_PHY_STATUS_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MII_M1011_PHY_STATUS_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ if (phydev->duplex == DUPLEX_FULL) {
+ phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+ phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+ }
+ } else {
+ int bmcr = phy_read(phydev, MII_BMCR);
+
+ if (bmcr < 0)
+ return bmcr;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ phydev->pause = phydev->asym_pause = 0;
+ }
+
+ return 0;
+}
+
static struct phy_driver marvell_drivers[] = {
{
.phy_id = 0x01410c60,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1111_config_init,
.config_aneg = &marvell_config_aneg,
- .read_status = &genphy_read_status,
+ .read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.driver = { .owner = THIS_MODULE },
struct net_local *nl;
struct plip_local *rcv;
unsigned char c0;
+ unsigned long flags;
nl = netdev_priv(dev);
rcv = &nl->rcv_data;
- spin_lock_irq (&nl->lock);
+ spin_lock_irqsave (&nl->lock, flags);
c0 = read_status(dev);
if ((c0 & 0xf8) != 0xc0) {
if ((dev->irq != -1) && (net_debug > 1))
printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
- spin_unlock_irq (&nl->lock);
+ spin_unlock_irqrestore (&nl->lock, flags);
return;
}
break;
}
- spin_unlock_irq(&nl->lock);
+ spin_unlock_irqrestore(&nl->lock, flags);
}
static int
return 0;
}
+static void gelic_net_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ if (0 <= ps3_compare_firmware_version(2, 2, 0))
+ wol->supported = WAKE_MAGIC;
+ else
+ wol->supported = 0;
+
+ wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+static int gelic_net_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ int status;
+ struct gelic_card *card;
+ u64 v1, v2;
+
+ if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
+ !capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ card = netdev_card(netdev);
+ if (wol->wolopts & WAKE_MAGIC) {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_ENABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: enabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(1);
+ else {
+ pr_info("%s: enabling WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ } else {
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_MAGIC_PACKET,
+ 0, GELIC_LV1_WOL_MP_DISABLE,
+ &v1, &v2);
+ if (status) {
+ pr_info("%s: disabling WOL failed %d\n", __func__,
+ status);
+ status = -EIO;
+ goto done;
+ }
+ status = lv1_net_control(bus_id(card), dev_id(card),
+ GELIC_LV1_SET_WOL,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR,
+ 0, GELIC_LV1_WOL_MATCH_ALL,
+ &v1, &v2);
+ if (!status)
+ ps3_sys_manager_set_wol(0);
+ else {
+ pr_info("%s: removing WOL filter failed %d\n",
+ __func__, status);
+ status = -EIO;
+ }
+ }
+done:
+ return status;
+}
+
static struct ethtool_ops gelic_ether_ethtool_ops = {
.get_drvinfo = gelic_net_get_drvinfo,
.get_settings = gelic_ether_get_settings,
.set_tx_csum = ethtool_op_set_tx_csum,
.get_rx_csum = gelic_net_get_rx_csum,
.set_rx_csum = gelic_net_set_rx_csum,
+ .get_wol = gelic_net_get_wol,
+ .set_wol = gelic_net_set_wol,
};
/**
GELIC_LV1_GET_ETH_PORT_STATUS = 2,
GELIC_LV1_SET_NEGOTIATION_MODE = 3,
GELIC_LV1_GET_VLAN_ID = 4,
+ GELIC_LV1_SET_WOL = 5,
GELIC_LV1_GET_CHANNEL = 6,
GELIC_LV1_POST_WLAN_CMD = 9,
GELIC_LV1_GET_WLAN_CMD_RESULT = 10,
GELIC_LV1_GET_WLAN_EVENT = 11
};
+/* for GELIC_LV1_SET_WOL */
+enum gelic_lv1_wol_command {
+ GELIC_LV1_WOL_MAGIC_PACKET = 1,
+ GELIC_LV1_WOL_ADD_MATCH_ADDR = 6,
+ GELIC_LV1_WOL_DELETE_MATCH_ADDR = 7,
+};
+
+/* for GELIC_LV1_WOL_MAGIC_PACKET */
+enum gelic_lv1_wol_mp_arg {
+ GELIC_LV1_WOL_MP_DISABLE = 0,
+ GELIC_LV1_WOL_MP_ENABLE = 1,
+};
+
+/* for GELIC_LV1_WOL_{ADD,DELETE}_MATCH_ADDR */
+enum gelic_lv1_wol_match_arg {
+ GELIC_LV1_WOL_MATCH_INDIVIDUAL = 0,
+ GELIC_LV1_WOL_MATCH_ALL = 1,
+};
+
/* status returened from GET_ETH_PORT_STATUS */
enum gelic_lv1_ether_port_status {
GELIC_LV1_ETHER_LINK_UP = 0x0000000000000001L,
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.15-2"
+#define DRV_VERSION "2.0.26.20"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
dev->trans_start = jiffies;
spin_unlock_irqrestore(&fifo->tx_lock, flags);
+ if (sp->config.intr_type == MSI_X)
+ tx_intr_handler(fifo);
+
return 0;
pci_map_failed:
stats->pci_map_fail_cnt++;
skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START);
if (work_done < to_do) {
- spin_lock_irq(&hw->hw_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&hw->hw_lock, flags);
__netif_rx_complete(dev, napi);
hw->intr_mask |= napimask[skge->port];
skge_write32(hw, B0_IMSK, hw->intr_mask);
skge_read32(hw, B0_IMSK);
- spin_unlock_irq(&hw->hw_lock);
+ spin_unlock_irqrestore(&hw->hw_lock, flags);
}
return work_done;
if (!hw)
return 0;
+ del_timer_sync(&hw->watchdog_timer);
+ cancel_work_sync(&hw->restart_work);
+
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
struct sky2_port *sky2 = netdev_priv(dev);
+ netif_device_detach(dev);
if (netif_running(dev))
sky2_down(dev);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+
+ netif_device_attach(dev);
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
#ifndef final_version /* Remove after testing. */
/* You will want this info for the initial debug. */
if (debug > 5) {
- DECLARE_MAC_BUF(mac);
- DECLARE_MAC_BUF(mac2);
-
- printk(KERN_DEBUG " Rx data %s %s"
+ printk(KERN_DEBUG " Rx data " MAC_FMT " " MAC_FMT
" %2.2x%2.2x.\n",
- print_mac(mac, &skb->data[0]),
- print_mac(mac2, &skb->data[6]),
+ skb->data[0], skb->data[1], skb->data[2],
+ skb->data[3], skb->data[4], skb->data[5],
+ skb->data[6], skb->data[7], skb->data[8],
+ skb->data[9], skb->data[10], skb->data[11],
skb->data[12], skb->data[13]);
}
#endif
* rx ring - must call napi_disable(), which
* schedule_timeout()'s if polling is already disabled.
*/
- work_done += gem_rx(gp, budget);
+ work_done += gem_rx(gp, budget - work_done);
if (work_done >= budget)
return work_done;
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.88"
-#define DRV_MODULE_RELDATE "March 20, 2008"
+#define DRV_MODULE_VERSION "3.89"
+#define DRV_MODULE_RELDATE "April 03, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
return ret;
}
+static void tg3_phydsp_write(struct tg3 *tp, u32 reg, u32 val)
+{
+ tg3_writephy(tp, MII_TG3_DSP_ADDRESS, reg);
+ tg3_writephy(tp, MII_TG3_DSP_RW_PORT, val);
+}
+
static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
{
u32 phy;
return 0;
}
+static void tg3_phy_apply_otp(struct tg3 *tp)
+{
+ u32 otp, phy;
+
+ if (!tp->phy_otp)
+ return;
+
+ otp = tp->phy_otp;
+
+ /* Enable SM_DSP clock and tx 6dB coding. */
+ phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+ MII_TG3_AUXCTL_ACTL_SMDSP_ENA |
+ MII_TG3_AUXCTL_ACTL_TX_6DB;
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+
+ phy = ((otp & TG3_OTP_AGCTGT_MASK) >> TG3_OTP_AGCTGT_SHIFT);
+ phy |= MII_TG3_DSP_TAP1_AGCTGT_DFLT;
+ tg3_phydsp_write(tp, MII_TG3_DSP_TAP1, phy);
+
+ phy = ((otp & TG3_OTP_HPFFLTR_MASK) >> TG3_OTP_HPFFLTR_SHIFT) |
+ ((otp & TG3_OTP_HPFOVER_MASK) >> TG3_OTP_HPFOVER_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH0, phy);
+
+ phy = ((otp & TG3_OTP_LPFDIS_MASK) >> TG3_OTP_LPFDIS_SHIFT);
+ phy |= MII_TG3_DSP_AADJ1CH3_ADCCKADJ;
+ tg3_phydsp_write(tp, MII_TG3_DSP_AADJ1CH3, phy);
+
+ phy = ((otp & TG3_OTP_VDAC_MASK) >> TG3_OTP_VDAC_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP75, phy);
+
+ phy = ((otp & TG3_OTP_10BTAMP_MASK) >> TG3_OTP_10BTAMP_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP96, phy);
+
+ phy = ((otp & TG3_OTP_ROFF_MASK) >> TG3_OTP_ROFF_SHIFT) |
+ ((otp & TG3_OTP_RCOFF_MASK) >> TG3_OTP_RCOFF_SHIFT);
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP97, phy);
+
+ /* Turn off SM_DSP clock. */
+ phy = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
+ MII_TG3_AUXCTL_ACTL_TX_6DB;
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+}
+
static int tg3_wait_macro_done(struct tg3 *tp)
{
int limit = 100;
*/
static int tg3_phy_reset(struct tg3 *tp)
{
+ u32 cpmuctrl;
u32 phy_status;
int err;
goto out;
}
+ cpmuctrl = 0;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+ cpmuctrl = tr32(TG3_CPMU_CTRL);
+ if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY)
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~CPMU_CTRL_GPHY_10MB_RXONLY);
+ }
+
err = tg3_bmcr_reset(tp);
if (err)
return err;
+ if (cpmuctrl & CPMU_CTRL_GPHY_10MB_RXONLY) {
+ u32 phy;
+
+ phy = MII_TG3_DSP_EXP8_AEDW | MII_TG3_DSP_EXP8_REJ2MHz;
+ tg3_phydsp_write(tp, MII_TG3_DSP_EXP8, phy);
+
+ tw32(TG3_CPMU_CTRL, cpmuctrl);
+ }
+
if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
u32 val;
MII_TG3_MISC_SHDW_APD_WKTM_84MS);
}
+ tg3_phy_apply_otp(tp);
+
out:
if (tp->tg3_flags2 & TG3_FLG2_PHY_ADC_BUG) {
tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
if (err)
return TG3_LOOPBACK_FAILED;
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
int i;
u32 status;
if (status != CPMU_MUTEX_GNT_DRIVER)
return TG3_LOOPBACK_FAILED;
- /* Turn off power management based on link speed. */
+ /* Turn off link-based power management. */
cpmuctrl = tr32(TG3_CPMU_CTRL);
- tw32(TG3_CPMU_CTRL,
- cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
- CPMU_CTRL_LINK_AWARE_MODE));
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5761_AX)
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~(CPMU_CTRL_LINK_SPEED_MODE |
+ CPMU_CTRL_LINK_AWARE_MODE));
+ else
+ tw32(TG3_CPMU_CTRL,
+ cpmuctrl & ~CPMU_CTRL_LINK_AWARE_MODE);
}
if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
err |= TG3_MAC_LOOPBACK_FAILED;
- if (tp->tg3_flags3 & TG3_FLG3_5761_5784_AX_FIXES) {
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761) {
tw32(TG3_CPMU_CTRL, cpmuctrl);
/* Release the mutex */
tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
- if (tp->pci_chip_rev_id == CHIPREV_ID_5784_A0 ||
- tp->pci_chip_rev_id == CHIPREV_ID_5784_A1)
- tp->led_ctrl = LED_CTRL_MODE_MAC;
+ if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX)
+ tp->led_ctrl = LED_CTRL_MODE_PHY_1;
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
}
}
+static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd)
+{
+ int i;
+ u32 val;
+
+ tw32(OTP_CTRL, cmd | OTP_CTRL_OTP_CMD_START);
+ tw32(OTP_CTRL, cmd);
+
+ /* Wait for up to 1 ms for command to execute. */
+ for (i = 0; i < 100; i++) {
+ val = tr32(OTP_STATUS);
+ if (val & OTP_STATUS_CMD_DONE)
+ break;
+ udelay(10);
+ }
+
+ return (val & OTP_STATUS_CMD_DONE) ? 0 : -EBUSY;
+}
+
+/* Read the gphy configuration from the OTP region of the chip. The gphy
+ * configuration is a 32-bit value that straddles the alignment boundary.
+ * We do two 32-bit reads and then shift and merge the results.
+ */
+static u32 __devinit tg3_read_otp_phycfg(struct tg3 *tp)
+{
+ u32 bhalf_otp, thalf_otp;
+
+ tw32(OTP_MODE, OTP_MODE_OTP_THRU_GRC);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_INIT))
+ return 0;
+
+ tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC1);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+ return 0;
+
+ thalf_otp = tr32(OTP_READ_DATA);
+
+ tw32(OTP_ADDRESS, OTP_ADDRESS_MAGIC2);
+
+ if (tg3_issue_otp_command(tp, OTP_CTRL_OTP_CMD_READ))
+ return 0;
+
+ bhalf_otp = tr32(OTP_READ_DATA);
+
+ return ((thalf_otp & 0x0000ffff) << 16) | (bhalf_otp >> 16);
+}
+
static int __devinit tg3_phy_probe(struct tg3 *tp)
{
u32 hw_phy_id_1, hw_phy_id_2;
tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
}
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX) {
+ tp->phy_otp = tg3_read_otp_phycfg(tp);
+ if (tp->phy_otp == 0)
+ tp->phy_otp = TG3_OTP_DEFAULT;
+ }
+
tp->coalesce_mode = 0;
if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX)
#define CHIPREV_5704_BX 0x21
#define CHIPREV_5750_AX 0x40
#define CHIPREV_5750_BX 0x41
+#define CHIPREV_5784_AX 0x57840
+#define CHIPREV_5761_AX 0x57610
#define GET_METAL_REV(CHIP_REV_ID) ((CHIP_REV_ID) & 0xff)
#define METAL_REV_A0 0x00
#define METAL_REV_A1 0x01
#define CPMU_CTRL_LINK_IDLE_MODE 0x00000200
#define CPMU_CTRL_LINK_AWARE_MODE 0x00000400
#define CPMU_CTRL_LINK_SPEED_MODE 0x00004000
+#define CPMU_CTRL_GPHY_10MB_RXONLY 0x00010000
#define TG3_CPMU_LSPD_10MB_CLK 0x00003604
#define CPMU_LSPD_10MB_MACCLK_MASK 0x001f0000
#define CPMU_LSPD_10MB_MACCLK_6_25 0x00130000
/* 0x702c unused */
#define NVRAM_ADDR_LOCKOUT 0x00007030
-/* 0x7034 --> 0x7c00 unused */
+/* 0x7034 --> 0x7500 unused */
+
+#define OTP_MODE 0x00007500
+#define OTP_MODE_OTP_THRU_GRC 0x00000001
+#define OTP_CTRL 0x00007504
+#define OTP_CTRL_OTP_PROG_ENABLE 0x00200000
+#define OTP_CTRL_OTP_CMD_READ 0x00000000
+#define OTP_CTRL_OTP_CMD_INIT 0x00000008
+#define OTP_CTRL_OTP_CMD_START 0x00000001
+#define OTP_STATUS 0x00007508
+#define OTP_STATUS_CMD_DONE 0x00000001
+#define OTP_ADDRESS 0x0000750c
+#define OTP_ADDRESS_MAGIC1 0x000000a0
+#define OTP_ADDRESS_MAGIC2 0x00000080
+/* 0x7510 unused */
+
+#define OTP_READ_DATA 0x00007514
+/* 0x7518 --> 0x7c04 unused */
#define PCIE_TRANSACTION_CFG 0x00007c04
#define PCIE_TRANS_CFG_1SHOT_MSI 0x20000000
#define PCIE_PWR_MGMT_THRESH 0x00007d28
#define PCIE_PWR_MGMT_L1_THRESH_MSK 0x0000ff00
+
+/* OTP bit definitions */
+#define TG3_OTP_AGCTGT_MASK 0x000000e0
+#define TG3_OTP_AGCTGT_SHIFT 1
+#define TG3_OTP_HPFFLTR_MASK 0x00000300
+#define TG3_OTP_HPFFLTR_SHIFT 1
+#define TG3_OTP_HPFOVER_MASK 0x00000400
+#define TG3_OTP_HPFOVER_SHIFT 1
+#define TG3_OTP_LPFDIS_MASK 0x00000800
+#define TG3_OTP_LPFDIS_SHIFT 11
+#define TG3_OTP_VDAC_MASK 0xff000000
+#define TG3_OTP_VDAC_SHIFT 24
+#define TG3_OTP_10BTAMP_MASK 0x0000f000
+#define TG3_OTP_10BTAMP_SHIFT 8
+#define TG3_OTP_ROFF_MASK 0x00e00000
+#define TG3_OTP_ROFF_SHIFT 11
+#define TG3_OTP_RCOFF_MASK 0x001c0000
+#define TG3_OTP_RCOFF_SHIFT 16
+
+#define TG3_OTP_DEFAULT 0x286c1640
+
+
#define TG3_EEPROM_MAGIC 0x669955aa
#define TG3_EEPROM_MAGIC_FW 0xa5000000
#define TG3_EEPROM_MAGIC_FW_MSK 0xff000000
#define MII_TG3_DSP_RW_PORT 0x15 /* DSP coefficient read/write port */
-#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
#define MII_TG3_EPHY_PTEST 0x17 /* 5906 PHY register */
+#define MII_TG3_DSP_ADDRESS 0x17 /* DSP address register */
+
+#define MII_TG3_DSP_TAP1 0x0001
+#define MII_TG3_DSP_TAP1_AGCTGT_DFLT 0x0007
+#define MII_TG3_DSP_AADJ1CH0 0x001f
+#define MII_TG3_DSP_AADJ1CH3 0x601f
+#define MII_TG3_DSP_AADJ1CH3_ADCCKADJ 0x0002
+#define MII_TG3_DSP_EXP8 0x0708
+#define MII_TG3_DSP_EXP8_REJ2MHz 0x0001
+#define MII_TG3_DSP_EXP8_AEDW 0x0200
+#define MII_TG3_DSP_EXP75 0x0f75
+#define MII_TG3_DSP_EXP96 0x0f96
+#define MII_TG3_DSP_EXP97 0x0f97
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
#define MII_TG3_AUXCTL_MISC_WREN 0x8000
#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
-#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+
+#define MII_TG3_AUXCTL_ACTL_SMDSP_ENA 0x0800
+#define MII_TG3_AUXCTL_ACTL_TX_6DB 0x0400
+#define MII_TG3_AUXCTL_SHDWSEL_AUXCTL 0x0000
#define MII_TG3_AUX_STAT 0x19 /* auxilliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
#define MII_TG3_INT_DUPLEXCHG 0x0008
#define MII_TG3_INT_ANEG_PAGE_RX 0x0400
+#define MII_TG3_MISC_SHDW 0x1c
+#define MII_TG3_MISC_SHDW_WREN 0x8000
+#define MII_TG3_MISC_SHDW_SCR5_SEL 0x1400
+#define MII_TG3_MISC_SHDW_APD_SEL 0x2800
+
+#define MII_TG3_MISC_SHDW_SCR5_C125OE 0x0001
+#define MII_TG3_MISC_SHDW_SCR5_DLLAPD 0x0002
+#define MII_TG3_MISC_SHDW_SCR5_SDTL 0x0004
+#define MII_TG3_MISC_SHDW_SCR5_DLPTLM 0x0008
+#define MII_TG3_MISC_SHDW_SCR5_LPED 0x0010
+
+#define MII_TG3_MISC_SHDW_APD_WKTM_84MS 0x0001
+#define MII_TG3_MISC_SHDW_APD_ENABLE 0x0020
+
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
#define PHY_REV_BCM5411_X0 0x1 /* Found on Netgear GA302T */
u32 led_ctrl;
+ u32 phy_otp;
u16 pci_cmd;
char board_part_number[24];
* Official releases will only have an a.b.c version number format.
*/
-static char version[] __devinitdata =
+static char version[] =
"Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ;
static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion",
return i;
}
-static int __devinit olympic_init(struct net_device *dev)
+static int olympic_init(struct net_device *dev)
{
struct olympic_private *olympic_priv;
u8 __iomem *olympic_mmio, *init_srb,*adapter_addr;
}
-static int __devinit olympic_open(struct net_device *dev)
+static int olympic_open(struct net_device *dev)
{
struct olympic_private *olympic_priv=netdev_priv(dev);
u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb;
if (olympic_priv->olympic_network_monitor) {
struct trh_hdr *mac_hdr;
- DECLARE_MAC_BUF(mac);
printk(KERN_WARNING "%s: Received MAC Frame, details: \n",dev->name);
mac_hdr = tr_hdr(mac_frame);
- printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %s\n",
- dev->name, print_mac(mac, mac_hdr->daddr));
- printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %s\n",
- dev->name, print_mac(mac, mac_hdr->saddr));
+ printk(KERN_WARNING "%s: MAC Frame Dest. Addr: "
+ MAC_FMT " \n", dev->name,
+ mac_hdr->daddr[0], mac_hdr->daddr[1],
+ mac_hdr->daddr[2], mac_hdr->daddr[3],
+ mac_hdr->daddr[4], mac_hdr->daddr[5]);
+ printk(KERN_WARNING "%s: MAC Frame Srce. Addr: "
+ MAC_FMT " \n", dev->name,
+ mac_hdr->saddr[0], mac_hdr->saddr[1],
+ mac_hdr->saddr[2], mac_hdr->saddr[3],
+ mac_hdr->saddr[4], mac_hdr->saddr[5]);
}
netif_rx(mac_frame);
dev->last_rx = jiffies;
tsv->svi = TRANSMIT_STATUS_CODE;
tsv->svl = S_TRANSMIT_STATUS_CODE;
- tsv->svv[0] = ((tx_fstatus & 0x0100 >> 6) || IBM_PASS_SOURCE_ADDR);
+ tsv->svv[0] = ((tx_fstatus & 0x0100 >> 6) | IBM_PASS_SOURCE_ADDR);
/* Stripped frame status of Transmitted Frame */
tsv->svv[1] = tx_fstatus & 0xff;
void __iomem *ee_addr = tp->base_addr + CSR9;
int read_cmd = location | (EE_READ_CMD << addr_len);
+ /* If location is past the end of what we can address, don't
+ * read some other location (ie truncate). Just return zero.
+ */
+ if (location > (1 << addr_len) - 1)
+ return 0;
+
iowrite32(EE_ENB & ~EE_CS, ee_addr);
iowrite32(EE_ENB, ee_addr);
EEPROM.
*/
ee_data = tp->eeprom;
+ memset(ee_data, 0, sizeof(tp->eeprom));
sum = 0;
if (chip_idx == LC82C168) {
for (i = 0; i < 3; i++) {
/* A serial EEPROM interface, we read now and sort it out later. */
int sa_offset = 0;
int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+ int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
- for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+ if (ee_max_addr > sizeof(tp->eeprom))
+ ee_max_addr = sizeof(tp->eeprom);
+
+ for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
ee_data[i] = data & 0xff;
ee_data[i + 1] = data >> 8;
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
- depends on USB_USBNET && NET_ETHERNET
+ depends on USB_USBNET
select CRC32
default y
help
/* We use the 20 byte dev->data for our 8 byte filter buffer
* to avoid allocating memory that is tricky to free later */
u8 *hashes = (u8 *) & dev->data;
- u8 rx_ctl = 0x01;
+ u8 rx_ctl = 0x31;
memset(hashes, 0x00, DM_MCAST_SIZE);
hashes[DM_MCAST_SIZE - 1] |= 0x80; /* broadcast address */
struct dev_mc_list *mc_list = net->mc_list;
int i;
- for (i = 0; i < net->mc_count; i++) {
+ for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}
USB_DEVICE(0x0a46, 0x8515), /* ADMtek ADM8515 USB NIC */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0a47, 0x9601), /* Hirose USB-100 */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
{
pegasus_t *pegasus;
- if (in_atomic())
- return 0;
-
pegasus = netdev_priv(dev);
mii_ethtool_gset(&pegasus->mii, ecmd);
-
return 0;
}
struct rndis_set_c *set_c;
struct rndis_halt *halt;
} u;
- u32 tmp, *phym;
+ u32 tmp, phym_unspec, *phym;
int reply_len;
unsigned char *bp;
goto halt_fail_and_release;
/* Check physical medium */
+ phym = NULL;
reply_len = sizeof *phym;
retval = rndis_query(dev, intf, u.buf, OID_GEN_PHYSICAL_MEDIUM,
0, (void **) &phym, &reply_len);
- if (retval != 0)
+ if (retval != 0 || !phym) {
/* OID is optional so don't fail here. */
- *phym = RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED;
+ phym_unspec = RNDIS_PHYSICAL_MEDIUM_UNSPECIFIED;
+ phym = &phym_unspec;
+ }
if ((flags & FLAG_RNDIS_PHYM_WIRELESS) &&
*phym != RNDIS_PHYSICAL_MEDIUM_WIRELESS_LAN) {
if (netif_msg_probe(dev))
return 0;
}
dev->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!dev->intr_urb) {
+ if (!dev->ctrl_urb) {
usb_free_urb(dev->rx_urb);
usb_free_urb(dev->tx_urb);
usb_free_urb(dev->intr_urb);
struct scatterlist sg[1+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
- DECLARE_MAC_BUF(mac);
sg_init_table(sg, 1+MAX_SKB_FRAGS);
- pr_debug("%s: xmit %p %s\n", dev->name, skb, print_mac(mac, dest));
+ pr_debug("%s: xmit %p " MAC_FMT "\n", dev->name, skb,
+ dest[0], dest[1], dest[2],
+ dest[3], dest[4], dest[5]);
/* Encode metadata header at front. */
hdr = skb_vnet_hdr(skb);
/* Activate callback for using skbs: if this returns false it
* means some were used in the meantime. */
if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- printk("Unlikely: restart svq race\n");
vi->svq->vq_ops->disable_cb(vi->svq);
netif_start_queue(dev);
goto again;
struct net_device_stats stats; /* some statistics */
};
-static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
+static LIST_HEAD(lapbeth_devices);
/* ------------------------------------------------------------------------ */
#else
-static ctl_table arlan_table[MAX_ARLANS + 1] =
-{
- { .ctl_name = 0 }
-};
-#endif
-#else
-
static ctl_table arlan_table[MAX_ARLANS + 1] =
{
{ .ctl_name = 0 }
//};
-#ifdef CONFIG_PROC_FS
static struct ctl_table_header *arlan_device_sysctl_header;
int __init init_arlan_proc(void)
kfree(e);
}
+/* Called with IRQs disabled. */
void b43_debugfs_log_txstat(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
if (!e)
return;
log = &e->txstatlog;
- B43_WARN_ON(!irqs_disabled());
- spin_lock(&log->lock);
+ spin_lock(&log->lock); /* IRQs are already disabled. */
i = log->end + 1;
if (i == B43_NR_LOGGED_TXSTATUS)
i = 0;
/* Check if a DMA mapping address is invalid. */
static bool b43_dma_mapping_error(struct b43_dmaring *ring,
dma_addr_t addr,
- size_t buffersize)
+ size_t buffersize, bool dma_to_device)
{
if (unlikely(dma_mapping_error(addr)))
return 1;
switch (ring->type) {
case B43_DMA_30BIT:
if ((u64)addr + buffersize > (1ULL << 30))
- return 1;
+ goto address_error;
break;
case B43_DMA_32BIT:
if ((u64)addr + buffersize > (1ULL << 32))
- return 1;
+ goto address_error;
break;
case B43_DMA_64BIT:
/* Currently we can't have addresses beyond
/* The address is OK. */
return 0;
+
+address_error:
+ /* We can't support this address. Unmap it again. */
+ unmap_descbuffer(ring, addr, buffersize, dma_to_device);
+
+ return 1;
}
static int setup_rx_descbuffer(struct b43_dmaring *ring,
if (unlikely(!skb))
return -ENOMEM;
dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0);
- if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+ if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
/* ugh. try to realloc in zone_dma */
gfp_flags |= GFP_DMA;
ring->rx_buffersize, 0);
}
- if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize)) {
+ if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
+ b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
dev_kfree_skb_any(skb);
return -EIO;
}
b43_txhdr_size(dev),
DMA_TO_DEVICE);
- if (b43_dma_mapping_error(ring, dma_test, b43_txhdr_size(dev))) {
+ if (b43_dma_mapping_error(ring, dma_test,
+ b43_txhdr_size(dev), 1)) {
/* ugh realloc */
kfree(ring->txhdr_cache);
ring->txhdr_cache = kcalloc(nr_slots,
DMA_TO_DEVICE);
if (b43_dma_mapping_error(ring, dma_test,
- b43_txhdr_size(dev)))
+ b43_txhdr_size(dev), 1)) {
+
+ b43err(dev->wl,
+ "TXHDR DMA allocation failed\n");
goto err_kfree_txhdr_cache;
+ }
}
dma_unmap_single(dev->dev->dev,
meta_hdr->dmaaddr = map_descbuffer(ring, (unsigned char *)header,
hdrsize, 1);
- if (b43_dma_mapping_error(ring, meta_hdr->dmaaddr, hdrsize)) {
+ if (b43_dma_mapping_error(ring, meta_hdr->dmaaddr, hdrsize, 1)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
return -EIO;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
- if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+ if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
- if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len)) {
+ if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
err = -EIO;
return err;
}
+/* Called with IRQs disabled. */
void b43_dma_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
ring = parse_cookie(dev, status->cookie, &slot);
if (unlikely(!ring))
return;
- B43_WARN_ON(!irqs_disabled());
- spin_lock(&ring->lock);
+
+ spin_lock(&ring->lock); /* IRQs are already disabled. */
B43_WARN_ON(!ring->tx);
ops = ring->ops;
{
dev->mac_suspended--;
B43_WARN_ON(dev->mac_suspended < 0);
- B43_WARN_ON(irqs_disabled());
if (dev->mac_suspended == 0) {
b43_write32(dev, B43_MMIO_MACCTL,
b43_read32(dev, B43_MMIO_MACCTL)
u32 tmp;
might_sleep();
- B43_WARN_ON(irqs_disabled());
B43_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
dev->conf.ConfigBase = parse.config.base;
dev->conf.Present = parse.config.rmask[0];
+ dev->conf.Attributes = CONF_ENABLE_IRQ;
+ dev->conf.IntType = INT_MEMORY_AND_IO;
dev->io.BasePort2 = 0;
dev->io.NumPorts2 = 0;
if (res != CS_SUCCESS)
goto err_disable;
- dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
- dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+ dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+ dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
{
struct ieee80211_hdr_4addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
strcmp(crypt->ops->name, "TKIP") == 0) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "received packet from %s\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ "received packet from " MAC_FMT "\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
}
return -1;
}
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- printk(KERN_DEBUG "%s: decryption failed (SA=%s"
+ printk(KERN_DEBUG "%s: decryption failed (SA=" MAC_FMT
") res=%d\n",
- local->dev->name, print_mac(mac, hdr->addr2), res);
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ res);
local->comm_tallies.rx_discards_wep_undecryptable++;
return -1;
}
struct ieee80211_crypt_data *crypt = NULL;
void *sta = NULL;
int keyidx = 0;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(dev);
local = iface->local;
* frames silently instead of filling system log with
* these reports. */
printk(KERN_DEBUG "%s: WEP decryption failed (not set)"
- " (SA=%s)\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ " (SA=" MAC_FMT ")\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
#endif
local->comm_tallies.rx_discards_wep_undecryptable++;
goto rx_dropped;
(keyidx = hostap_rx_frame_decrypt(local, skb, crypt)) < 0)
{
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from %s\n", dev->name,
- print_mac(mac, hdr->addr2));
+ "from " MAC_FMT "\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
/* TODO: could inform hostapd about this so that it
* could send auth failure report */
goto rx_dropped;
"unencrypted EAPOL frame\n", local->dev->name);
} else {
printk(KERN_DEBUG "%s: encryption configured, but RX "
- "frame not encrypted (SA=%s)\n",
- local->dev->name, print_mac(mac, hdr->addr2));
+ "frame not encrypted (SA=" MAC_FMT ")\n",
+ local->dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
}
!hostap_is_eapol_frame(local, skb)) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: dropped unencrypted RX data "
- "frame from %s"
- " (drop_unencrypted=1)\n",
- dev->name, print_mac(mac, hdr->addr2));
+ "frame from " MAC_FMT " (drop_unencrypted=1)\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
}
goto rx_dropped;
}
struct ieee80211_hdr_4addr *hdr;
u16 fc;
int prefix_len, postfix_len, hdr_len, res;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(skb->dev);
local = iface->local;
hdr = (struct ieee80211_hdr_4addr *) skb->data;
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: TKIP countermeasures: dropped "
- "TX packet to %s\n",
- local->dev->name, print_mac(mac, hdr->addr1));
+ "TX packet to " MAC_FMT "\n",
+ local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
kfree_skb(skb);
return NULL;
__le16 *pos;
struct sta_info *sta = NULL;
char *txt = NULL;
- DECLARE_MAC_BUF(mac);
if (ap->local->hostapd) {
dev_kfree_skb(skb);
if (sta)
atomic_dec(&sta->users);
if (txt) {
- PDEBUG(DEBUG_AP, "%s: %s auth_cb - alg=%d "
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth_cb - alg=%d "
"trans#=%d status=%d - %s\n",
- dev->name, print_mac(mac, hdr->addr1), auth_alg,
- auth_transaction, status, txt);
+ dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ auth_alg, auth_transaction, status, txt);
}
dev_kfree_skb(skb);
}
__le16 *pos;
struct sta_info *sta = NULL;
char *txt = NULL;
- DECLARE_MAC_BUF(mac);
if (ap->local->hostapd) {
dev_kfree_skb(skb);
if (sta)
atomic_dec(&sta->users);
if (txt) {
- PDEBUG(DEBUG_AP, "%s: %s assoc_cb - %s\n",
- dev->name, print_mac(mac, hdr->addr1), txt);
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " assoc_cb - %s\n",
+ dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ txt);
}
dev_kfree_skb(skb);
}
struct ap_data *ap = data;
struct ieee80211_hdr_4addr *hdr;
struct sta_info *sta;
- DECLARE_MAC_BUF(mac);
if (skb->len < 24)
goto fail;
sta->flags &= ~WLAN_STA_PENDING_POLL;
spin_unlock(&ap->sta_table_lock);
} else {
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" did not ACK activity poll frame\n",
- ap->local->dev->name, print_mac(mac, hdr->addr1));
+ ap->local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
fail:
struct sta_info *sta = NULL;
struct ieee80211_crypt_data *crypt;
char *txt = "";
- DECLARE_MAC_BUF(mac);
len = skb->len - IEEE80211_MGMT_HDR_LEN;
if (len < 6) {
PDEBUG(DEBUG_AP, "%s: handle_authen - too short payload "
- "(len=%d) from %s\n", dev->name, len,
- print_mac(mac, hdr->addr2));
+ "(len=%d) from " MAC_FMT "\n", dev->name, len,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
return;
}
if (time_after(jiffies, sta->u.ap.last_beacon +
(10 * sta->listen_interval * HZ) / 1024)) {
PDEBUG(DEBUG_AP, "%s: no beacons received for a while,"
- " assuming AP %s is now STA\n",
- dev->name, print_mac(mac, sta->addr));
+ " assuming AP " MAC_FMT " is now STA\n",
+ dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
sta->ap = 0;
sta->flags = 0;
sta->u.sta.challenge = NULL;
}
if (resp) {
- PDEBUG(DEBUG_AP, "%s: %s auth (alg=%d "
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT " auth (alg=%d "
"trans#=%d stat=%d len=%d fc=%04x) ==> %d (%s)\n",
- dev->name, print_mac(mac, hdr->addr2), auth_alg,
- auth_transaction, status_code, len, fc, resp, txt);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ auth_alg, auth_transaction, status_code, len,
+ fc, resp, txt);
}
}
int send_deauth = 0;
char *txt = "";
u8 prev_ap[ETH_ALEN];
- DECLARE_MAC_BUF(mac);
left = len = skb->len - IEEE80211_MGMT_HDR_LEN;
if (len < (reassoc ? 10 : 4)) {
PDEBUG(DEBUG_AP, "%s: handle_assoc - too short payload "
- "(len=%d, reassoc=%d) from %s\n",
- dev->name, len, reassoc, print_mac(mac, hdr->addr2));
+ "(len=%d, reassoc=%d) from " MAC_FMT "\n",
+ dev->name, len, reassoc,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5]);
return;
}
}
if (left > 0) {
- PDEBUG(DEBUG_AP, "%s: assoc from %s"
+ PDEBUG(DEBUG_AP, "%s: assoc from " MAC_FMT
" with extra data (%d bytes) [",
- dev->name, print_mac(mac, hdr->addr2), left);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ left);
while (left > 0) {
PDEBUG2(DEBUG_AP, "<%02x>", *u);
u++; left--;
}
#if 0
- PDEBUG(DEBUG_AP, "%s: %s %sassoc (len=%d "
- "prev_ap=%s) => %d(%d) (%s)\n",
- dev->name, print_mac(mac, hdr->addr2), reassoc ? "re" : "", len,
- print_mac(mac, prev_ap), resp, send_deauth, txt);
+ PDEBUG(DEBUG_AP, "%s: " MAC_FMT" %sassoc (len=%d "
+ "prev_ap=" MAC_FMT") => %d(%d) (%s)\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reassoc ? "re" : "", len,
+ prev_ap[0], prev_ap[1], prev_ap[2],
+ prev_ap[3], prev_ap[4], prev_ap[5],
+ resp, send_deauth, txt);
#endif
}
pos = (__le16 *) body;
reason_code = le16_to_cpu(*pos);
- PDEBUG(DEBUG_AP, "%s: deauthentication: %s len=%d, "
- "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
- reason_code);
+ PDEBUG(DEBUG_AP, "%s: deauthentication: " MAC_FMT " len=%d, "
+ "reason_code=%d\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ len, reason_code);
spin_lock_bh(&local->ap->sta_table_lock);
sta = ap_get_sta(local->ap, hdr->addr2);
}
spin_unlock_bh(&local->ap->sta_table_lock);
if (sta == NULL) {
- printk("%s: deauthentication from %s, "
+ printk("%s: deauthentication from " MAC_FMT ", "
"reason_code=%d, but STA not authenticated\n", dev->name,
- print_mac(mac, hdr->addr2), reason_code);
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reason_code);
}
}
u16 reason_code;
__le16 *pos;
struct sta_info *sta = NULL;
- DECLARE_MAC_BUF(mac);
len = skb->len - IEEE80211_MGMT_HDR_LEN;
pos = (__le16 *) body;
reason_code = le16_to_cpu(*pos);
- PDEBUG(DEBUG_AP, "%s: disassociation: %s len=%d, "
- "reason_code=%d\n", dev->name, print_mac(mac, hdr->addr2), len,
- reason_code);
+ PDEBUG(DEBUG_AP, "%s: disassociation: " MAC_FMT " len=%d, "
+ "reason_code=%d\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ len, reason_code);
spin_lock_bh(&local->ap->sta_table_lock);
sta = ap_get_sta(local->ap, hdr->addr2);
}
spin_unlock_bh(&local->ap->sta_table_lock);
if (sta == NULL) {
- printk("%s: disassociation from %s, "
+ printk("%s: disassociation from " MAC_FMT ", "
"reason_code=%d, but STA not authenticated\n",
- dev->name, print_mac(mac, hdr->addr2), reason_code);
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
+ reason_code);
}
}
struct sta_info *sta;
u16 aid;
struct sk_buff *skb;
- DECLARE_MAC_BUF(mac);
- PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=%s"
- ", TA=%s PWRMGT=%d\n",
- print_mac(mac, hdr->addr1), print_mac(mac, hdr->addr2),
+ PDEBUG(DEBUG_PS2, "handle_pspoll: BSSID=" MAC_FMT
+ ", TA=" MAC_FMT " PWRMGT=%d\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ hdr->addr2[0], hdr->addr2[1], hdr->addr2[2],
+ hdr->addr2[3], hdr->addr2[4], hdr->addr2[5],
!!(le16_to_cpu(hdr->frame_ctl) & IEEE80211_FCTL_PM));
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr1));
+ PDEBUG(DEBUG_AP, "handle_pspoll - addr1(BSSID)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
return;
}
wds_oper_queue);
local_info_t *local = ap->local;
struct wds_oper_data *entry, *prev;
- DECLARE_MAC_BUF(mac);
spin_lock_bh(&local->lock);
entry = local->ap->wds_oper_entries;
while (entry) {
PDEBUG(DEBUG_AP, "%s: %s automatic WDS connection "
- "to AP %s\n",
+ "to AP " MAC_FMT "\n",
local->dev->name,
entry->type == WDS_ADD ? "adding" : "removing",
- print_mac(mac, entry->addr));
+ entry->addr[0], entry->addr[1], entry->addr[2],
+ entry->addr[3], entry->addr[4], entry->addr[5]);
if (entry->type == WDS_ADD)
prism2_wds_add(local, entry->addr, 0);
else if (entry->type == WDS_DEL)
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
u16 fc, type, stype;
struct ieee80211_hdr_4addr *hdr;
- DECLARE_MAC_BUF(mac);
/* FIX: should give skb->len to handler functions and check that the
* buffer is long enough */
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
PDEBUG(DEBUG_AP, "handle_ap_item - addr1(BSSID)="
- "%s not own MAC\n",
- print_mac(mac, hdr->addr1));
+ MAC_FMT " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
goto done;
}
}
if (memcmp(hdr->addr1, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr1));
+ PDEBUG(DEBUG_AP, "handle_ap_item - addr1(DA)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
goto done;
}
if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN)) {
- PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=%s"
- " not own MAC\n", print_mac(mac, hdr->addr3));
+ PDEBUG(DEBUG_AP, "handle_ap_item - addr3(BSSID)=" MAC_FMT
+ " not own MAC\n",
+ hdr->addr3[0], hdr->addr3[1], hdr->addr3[2],
+ hdr->addr3[3], hdr->addr3[4], hdr->addr3[5]);
goto done;
}
struct sk_buff *skb;
struct ieee80211_hdr_4addr *hdr;
struct hostap_80211_rx_status rx_stats;
- DECLARE_MAC_BUF(mac);
if (skb_queue_empty(&sta->tx_buf))
return;
hdr->duration_id = cpu_to_le16(sta->aid | BIT(15) | BIT(14));
PDEBUG(DEBUG_PS2, "%s: Scheduling buffered packet delivery for STA "
- "%s\n", local->dev->name, print_mac(mac, sta->addr));
+ MAC_FMT "\n", local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
skb->dev = local->dev;
int ret = sta->tx_rate;
struct hostap_interface *iface;
local_info_t *local;
- DECLARE_MAC_BUF(mac);
iface = netdev_priv(dev);
local = iface->local;
case 3: sta->tx_rate = 110; break;
default: sta->tx_rate = 0; break;
}
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" TX rate raised to %d\n",
- dev->name, print_mac(mac, sta->addr), sta->tx_rate);
+ dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5],
+ sta->tx_rate);
}
sta->tx_since_last_failure = 0;
}
int set_tim, ret;
struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
- DECLARE_MAC_BUF(mac);
meta = (struct hostap_skb_tx_data *) skb->cb;
ret = AP_TX_CONTINUE;
* print out any errors here. */
if (net_ratelimit()) {
printk(KERN_DEBUG "AP: drop packet to non-associated "
- "STA %s\n",
- print_mac(mac, hdr->addr1));
+ "STA " MAC_FMT "\n",
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5]);
}
#endif
local->ap->tx_drop_nonassoc++;
}
if (skb_queue_len(&sta->tx_buf) >= STA_MAX_TX_BUFFER) {
- PDEBUG(DEBUG_PS, "%s: No more space in STA (%s"
+ PDEBUG(DEBUG_PS, "%s: No more space in STA (" MAC_FMT
")'s PS mode buffer\n",
- local->dev->name, print_mac(mac, sta->addr));
+ local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5]);
/* Make sure that TIM is set for the station (it might not be
* after AP wlan hw reset). */
/* FIX: should fix hw reset to restore bits based on STA
struct sta_info *sta;
struct ieee80211_hdr_4addr *hdr;
struct hostap_skb_tx_data *meta;
- DECLARE_MAC_BUF(mac);
hdr = (struct ieee80211_hdr_4addr *) skb->data;
meta = (struct hostap_skb_tx_data *) skb->cb;
sta = ap_get_sta(local->ap, hdr->addr1);
if (!sta) {
spin_unlock(&local->ap->sta_table_lock);
- PDEBUG(DEBUG_AP, "%s: Could not find STA %s"
+ PDEBUG(DEBUG_AP, "%s: Could not find STA " MAC_FMT
" for this TX error (@%lu)\n",
- local->dev->name, print_mac(mac, hdr->addr1), jiffies);
+ local->dev->name,
+ hdr->addr1[0], hdr->addr1[1], hdr->addr1[2],
+ hdr->addr1[3], hdr->addr1[4], hdr->addr1[5],
+ jiffies);
return;
}
case 3: sta->tx_rate = 110; break;
default: sta->tx_rate = 0; break;
}
- PDEBUG(DEBUG_AP, "%s: STA %s"
+ PDEBUG(DEBUG_AP, "%s: STA " MAC_FMT
" TX rate lowered to %d\n",
- local->dev->name, print_mac(mac, sta->addr),
+ local->dev->name,
+ sta->addr[0], sta->addr[1], sta->addr[2],
+ sta->addr[3], sta->addr[4], sta->addr[5],
sta->tx_rate);
}
sta->tx_consecutive_exc = 0;
struct sta_info *sta;
u16 fc, type, stype;
struct ieee80211_hdr_4addr *hdr;
- DECLARE_MAC_BUF(mac);
if (local->ap == NULL)
return AP_RX_CONTINUE;
} else {
printk(KERN_DEBUG "%s: dropped received packet"
" from non-associated STA "
- "%s"
+ MAC_FMT
" (type=0x%02x, subtype=0x%02x)\n",
- dev->name, print_mac(mac, hdr->addr2),
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
type >> 2, stype >> 4);
hostap_rx(dev, skb, rx_stats);
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
* being associated. */
printk(KERN_DEBUG "%s: rejected received nullfunc "
"frame without ToDS from not associated STA "
- "%s\n",
- dev->name, print_mac(mac, hdr->addr2));
+ MAC_FMT "\n",
+ dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
hostap_rx(dev, skb, rx_stats);
#endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
}
* If BSSID is own, report the dropping of this frame. */
if (memcmp(hdr->addr3, dev->dev_addr, ETH_ALEN) == 0) {
printk(KERN_DEBUG "%s: dropped received packet from "
- "%s with no ToDS flag "
+ MAC_FMT " with no ToDS flag "
"(type=0x%02x, subtype=0x%02x)\n", dev->name,
- print_mac(mac, hdr->addr2), type >> 2, stype >> 4);
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ type >> 2, stype >> 4);
hostap_dump_rx_80211(dev->name, skb, rx_stats);
}
ret = AP_RX_DROP;
u8 id, hdr_len, unicast;
u16 remaining_bytes;
int fc;
- DECLARE_MAC_BUF(mac);
hdr_len = ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_ctl));
switch (priv->ieee->iw_mode) {
id = ipw_add_station(priv, hdr->addr1);
if (id == IPW_INVALID_STATION) {
IPW_WARNING("Attempt to send data to "
- "invalid cell: %s\n",
- print_mac(mac, hdr->addr1));
+ "invalid cell: " MAC_FMT "\n",
+ hdr->addr1[0], hdr->addr1[1],
+ hdr->addr1[2], hdr->addr1[3],
+ hdr->addr1[4], hdr->addr1[5]);
goto drop;
}
}
priv->prom_priv->priv = priv;
strcpy(priv->prom_net_dev->name, "rtap%d");
+ memcpy(priv->prom_net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
priv->prom_net_dev->open = ipw_prom_open;
runs.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl4965.ko.
bool "Enable 802.11n HT features in iwl4965 driver"
depends on EXPERIMENTAL
depends on IWL4965 && IWL4965_QOS
- depends on n
---help---
This option enables IEEE 802.11n High Throughput features
for the iwl4965 driver.
runs.
If you want to compile the driver as a module ( = code which can be
- inserted in and remvoed from the running kernel whenever you want),
+ inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/kbuild/modules.txt>. The
module will be called iwl3945.ko.
if (sta_ht_inf) {
if ((!sta_ht_inf->ht_supported) ||
- (!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))
+ (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
return 0;
}
/* At this point, the NIC is initialized and operational */
priv->notif_missed_beacons = 0;
- set_bit(STATUS_READY, &priv->status);
iwl3945_reg_txpower_periodic(priv);
IWL_DEBUG_INFO("ALIVE processing complete.\n");
+ set_bit(STATUS_READY, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
if (priv->error_recovering)
return err;
}
-static void iwl3945_pci_remove(struct pci_dev *pdev)
+static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
{
struct iwl3945_priv *priv = pci_get_drvdata(pdev);
struct list_head *p, *q;
/* At this point, the NIC is initialized and operational */
priv->notif_missed_beacons = 0;
- set_bit(STATUS_READY, &priv->status);
iwl4965_rf_kill_ct_config(priv);
IWL_DEBUG_INFO("ALIVE processing complete.\n");
+ set_bit(STATUS_READY, &priv->status);
wake_up_interruptible(&priv->wait_command_queue);
if (priv->error_recovering)
return err;
}
-static void iwl4965_pci_remove(struct pci_dev *pdev)
+static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
{
struct iwl4965_priv *priv = pci_get_drvdata(pdev);
struct list_head *p, *q;
}
if (find_any_ssid) {
- u8 new_mode;
+ u8 new_mode = assoc_req->mode;
ret = lbs_find_best_network_ssid(priv, assoc_req->ssid,
&assoc_req->ssid_len, assoc_req->mode, &new_mode);
/* Card has a command result for us */
if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
- spin_lock(&priv->driver_lock);
ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
- spin_unlock(&priv->driver_lock);
if (ret < 0)
lbs_pr_err("could not receive cmd from card\n");
}
exit:
/*
- * Set device mode to sleep for power management.
+ * Set device mode to sleep for power management,
+ * on some hardware this call seems to consistently fail.
+ * From the specifications it is hard to tell why it fails,
+ * and if this is a "bad thing".
+ * Overall it is safe to just ignore the failure and
+ * continue suspending. The only downside is that the
+ * device will not be in optimal power save mode, but with
+ * the radio and the other components already disabled the
+ * device is as good as disabled.
*/
retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
if (retval)
- return retval;
+ WARNING(rt2x00dev, "Device failed to enter sleep state, "
+ "continue suspending.\n");
return 0;
}
* beacon frame.
*/
if (skb_headroom(skb) < TXD_DESC_SIZE) {
- if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC)) {
- dev_kfree_skb(skb);
+ if (pskb_expand_head(skb, TXD_DESC_SIZE, 0, GFP_ATOMIC))
return -ENOMEM;
- }
}
/*
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
/* Conceptronic */
{ USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Corega */
+ { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
/* D-Link */
{ USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
-};
+} __attribute__((packed));
/* Size for structure checking (if padding is correct) */
#define MMW_SIZE 37
config OF_DEVICE
def_bool y
depends on OF && (SPARC || PPC_OF)
+
+config OF_GPIO
+ def_bool y
+ depends on OF && PPC_OF && HAVE_GPIO_LIB
+ help
+ OpenFirmware GPIO accessors
+
+config OF_I2C
+ def_bool y
+ depends on OF && I2C
+ help
+ OpenFirmware I2C accessors
obj-y = base.o
obj-$(CONFIG_OF_DEVICE) += device.o platform.o
+obj-$(CONFIG_OF_GPIO) += gpio.o
+obj-$(CONFIG_OF_I2C) += i2c.o
}
EXPORT_SYMBOL(of_device_is_compatible);
+/**
+ * of_device_is_available - check if a device is available for use
+ *
+ * @device: Node to check for availability
+ *
+ * Returns 1 if the status property is absent or set to "okay" or "ok",
+ * 0 otherwise
+ */
+int of_device_is_available(const struct device_node *device)
+{
+ const char *status;
+ int statlen;
+
+ status = of_get_property(device, "status", &statlen);
+ if (status == NULL)
+ return 1;
+
+ if (statlen > 0) {
+ if (!strcmp(status, "okay") || !strcmp(status, "ok"))
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(of_device_is_available);
+
/**
* of_get_parent - Get a node's parent if any
* @node: Node to get parent
--- /dev/null
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <asm/prom.h>
+
+/**
+ * of_get_gpio - Get a GPIO number from the device tree to use with GPIO API
+ * @np: device node to get GPIO from
+ * @index: index of the GPIO
+ *
+ * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
+ * value on the error condition.
+ */
+int of_get_gpio(struct device_node *np, int index)
+{
+ int ret = -EINVAL;
+ struct device_node *gc;
+ struct of_gpio_chip *of_gc = NULL;
+ int size;
+ const u32 *gpios;
+ u32 nr_cells;
+ int i;
+ const void *gpio_spec;
+ const u32 *gpio_cells;
+ int gpio_index = 0;
+
+ gpios = of_get_property(np, "gpios", &size);
+ if (!gpios) {
+ ret = -ENOENT;
+ goto err0;
+ }
+ nr_cells = size / sizeof(u32);
+
+ for (i = 0; i < nr_cells; gpio_index++) {
+ const phandle *gpio_phandle;
+
+ gpio_phandle = gpios + i;
+ gpio_spec = gpio_phandle + 1;
+
+ /* one cell hole in the gpios = <>; */
+ if (!*gpio_phandle) {
+ if (gpio_index == index)
+ return -ENOENT;
+ i++;
+ continue;
+ }
+
+ gc = of_find_node_by_phandle(*gpio_phandle);
+ if (!gc) {
+ pr_debug("%s: could not find phandle for gpios\n",
+ np->full_name);
+ goto err0;
+ }
+
+ of_gc = gc->data;
+ if (!of_gc) {
+ pr_debug("%s: gpio controller %s isn't registered\n",
+ np->full_name, gc->full_name);
+ goto err1;
+ }
+
+ gpio_cells = of_get_property(gc, "#gpio-cells", &size);
+ if (!gpio_cells || size != sizeof(*gpio_cells) ||
+ *gpio_cells != of_gc->gpio_cells) {
+ pr_debug("%s: wrong #gpio-cells for %s\n",
+ np->full_name, gc->full_name);
+ goto err1;
+ }
+
+ /* Next phandle is at phandle cells + #gpio-cells */
+ i += sizeof(*gpio_phandle) / sizeof(u32) + *gpio_cells;
+ if (i >= nr_cells + 1) {
+ pr_debug("%s: insufficient gpio-spec length\n",
+ np->full_name);
+ goto err1;
+ }
+
+ if (gpio_index == index)
+ break;
+
+ of_gc = NULL;
+ of_node_put(gc);
+ }
+
+ if (!of_gc) {
+ ret = -ENOENT;
+ goto err0;
+ }
+
+ ret = of_gc->xlate(of_gc, np, gpio_spec);
+ if (ret < 0)
+ goto err1;
+
+ ret += of_gc->gc.base;
+err1:
+ of_node_put(gc);
+err0:
+ pr_debug("%s exited with status %d\n", __func__, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_get_gpio);
+
+/**
+ * of_gpio_simple_xlate - translate gpio_spec to the GPIO number
+ * @of_gc: pointer to the of_gpio_chip structure
+ * @np: device node of the GPIO chip
+ * @gpio_spec: gpio specifier as found in the device tree
+ *
+ * This is simple translation function, suitable for the most 1:1 mapped
+ * gpio chips. This function performs only one sanity check: whether gpio
+ * is less than ngpios (that is specified in the gpio_chip).
+ */
+int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np,
+ const void *gpio_spec)
+{
+ const u32 *gpio = gpio_spec;
+
+ if (*gpio > of_gc->gc.ngpio)
+ return -EINVAL;
+
+ return *gpio;
+}
+EXPORT_SYMBOL(of_gpio_simple_xlate);
+
+/* Should be sufficient for now, later we'll use dynamic bases. */
+#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32)
+#define GPIOS_PER_CHIP 32
+#else
+#define GPIOS_PER_CHIP 64
+#endif
+
+static int of_get_gpiochip_base(struct device_node *np)
+{
+ struct device_node *gc = NULL;
+ int gpiochip_base = 0;
+
+ while ((gc = of_find_all_nodes(gc))) {
+ if (!of_get_property(gc, "gpio-controller", NULL))
+ continue;
+
+ if (gc != np) {
+ gpiochip_base += GPIOS_PER_CHIP;
+ continue;
+ }
+
+ of_node_put(gc);
+
+ if (gpiochip_base >= ARCH_NR_GPIOS)
+ return -ENOSPC;
+
+ return gpiochip_base;
+ }
+
+ return -ENOENT;
+}
+
+/**
+ * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank)
+ * @np: device node of the GPIO chip
+ * @mm_gc: pointer to the of_mm_gpio_chip allocated structure
+ *
+ * To use this function you should allocate and fill mm_gc with:
+ *
+ * 1) In the gpio_chip structure:
+ * - all the callbacks
+ *
+ * 2) In the of_gpio_chip structure:
+ * - gpio_cells
+ * - xlate callback (optional)
+ *
+ * 3) In the of_mm_gpio_chip structure:
+ * - save_regs callback (optional)
+ *
+ * If succeeded, this function will map bank's memory and will
+ * do all necessary work for you. Then you'll able to use .regs
+ * to manage GPIOs from the callbacks.
+ */
+int of_mm_gpiochip_add(struct device_node *np,
+ struct of_mm_gpio_chip *mm_gc)
+{
+ int ret = -ENOMEM;
+ struct of_gpio_chip *of_gc = &mm_gc->of_gc;
+ struct gpio_chip *gc = &of_gc->gc;
+
+ gc->label = kstrdup(np->full_name, GFP_KERNEL);
+ if (!gc->label)
+ goto err0;
+
+ mm_gc->regs = of_iomap(np, 0);
+ if (!mm_gc->regs)
+ goto err1;
+
+ gc->base = of_get_gpiochip_base(np);
+ if (gc->base < 0) {
+ ret = gc->base;
+ goto err1;
+ }
+
+ if (!of_gc->xlate)
+ of_gc->xlate = of_gpio_simple_xlate;
+
+ if (mm_gc->save_regs)
+ mm_gc->save_regs(mm_gc);
+
+ np->data = of_gc;
+
+ ret = gpiochip_add(gc);
+ if (ret)
+ goto err2;
+
+ /* We don't want to lose the node and its ->data */
+ of_node_get(np);
+
+ pr_debug("%s: registered as generic GPIO chip, base is %d\n",
+ np->full_name, gc->base);
+ return 0;
+err2:
+ np->data = NULL;
+ iounmap(mm_gc->regs);
+err1:
+ kfree(gc->label);
+err0:
+ pr_err("%s: GPIO chip registration failed with status %d\n",
+ np->full_name, ret);
+ return ret;
+}
+EXPORT_SYMBOL(of_mm_gpiochip_add);
--- /dev/null
+/*
+ * OF helpers for the I2C API
+ *
+ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * Based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+struct i2c_driver_device {
+ char *of_device;
+ char *i2c_type;
+};
+
+static struct i2c_driver_device i2c_devices[] = {
+ { "dallas,ds1374", "rtc-ds1374" },
+};
+
+static int of_find_i2c_driver(struct device_node *node,
+ struct i2c_board_info *info)
+{
+ int i, cplen;
+ const char *compatible;
+ const char *p;
+
+ /* 1. search for exception list entry */
+ for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
+ if (!of_device_is_compatible(node, i2c_devices[i].of_device))
+ continue;
+ if (strlcpy(info->type, i2c_devices[i].i2c_type,
+ I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+
+ return 0;
+ }
+
+ compatible = of_get_property(node, "compatible", &cplen);
+ if (!compatible)
+ return -ENODEV;
+
+ /* 2. search for linux,<i2c-type> entry */
+ p = compatible;
+ while (cplen > 0) {
+ if (!strncmp(p, "linux,", 6)) {
+ p += 6;
+ if (strlcpy(info->type, p,
+ I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+ return 0;
+ }
+
+ i = strlen(p) + 1;
+ p += i;
+ cplen -= i;
+ }
+
+ /* 3. take fist compatible entry and strip manufacturer */
+ p = strchr(compatible, ',');
+ if (!p)
+ return -ENODEV;
+ p++;
+ if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE)
+ return -ENOMEM;
+ return 0;
+}
+
+void of_register_i2c_devices(struct i2c_adapter *adap,
+ struct device_node *adap_node)
+{
+ void *result;
+ struct device_node *node;
+
+ for_each_child_of_node(adap_node, node) {
+ struct i2c_board_info info = {};
+ const u32 *addr;
+ int len;
+
+ addr = of_get_property(node, "reg", &len);
+ if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
+ printk(KERN_ERR
+ "of-i2c: invalid i2c device entry\n");
+ continue;
+ }
+
+ info.irq = irq_of_parse_and_map(node, 0);
+ if (info.irq == NO_IRQ)
+ info.irq = -1;
+
+ if (of_find_i2c_driver(node, &info) < 0) {
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+
+ info.addr = *addr;
+
+ request_module(info.type);
+
+ result = i2c_new_device(adap, &info);
+ if (result == NULL) {
+ printk(KERN_ERR
+ "of-i2c: Failed to load driver for %s\n",
+ info.type);
+ irq_dispose_mapping(info.irq);
+ continue;
+ }
+ }
+}
+EXPORT_SYMBOL(of_register_i2c_devices);
outb(r | 8, 0x2F);
outb(0x02, 0x2E); /* Lock */
outb(0x02, 0x2F);
-
- release_region(0x2e, 1);
}
+ release_region(0x2e, 1);
}
#endif /* CONFIG_PARPORT_PC_SUPERIO */
}
static struct iova_domain reserved_iova_list;
+static struct lock_class_key reserved_alloc_key;
+static struct lock_class_key reserved_rbtree_key;
static void dmar_init_reserved_ranges(void)
{
init_iova_domain(&reserved_iova_list, DMA_32BIT_PFN);
+ lockdep_set_class(&reserved_iova_list.iova_alloc_lock,
+ &reserved_alloc_key);
+ lockdep_set_class(&reserved_iova_list.iova_rbtree_lock,
+ &reserved_rbtree_key);
+
/* IOAPIC ranges shouldn't be accessed by DMA */
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(IOAPIC_RANGE_START),
IOVA_PFN(IOAPIC_RANGE_END));
}
EXPORT_SYMBOL_GPL(pci_find_ht_capability);
-void pcie_wait_pending_transaction(struct pci_dev *dev)
-{
- int pos;
- u16 reg16;
-
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (!pos)
- return;
- while (1) {
- pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, ®16);
- if (!(reg16 & PCI_EXP_DEVSTA_TRPND))
- break;
- cpu_relax();
- }
-
-}
-EXPORT_SYMBOL_GPL(pcie_wait_pending_transaction);
-
/**
* pci_find_parent_resource - return resource region of parent bus of given region
* @dev: PCI device structure contains resources to be searched
if (atomic_sub_return(1, &dev->enable_cnt) != 0)
return;
- /* Wait for all transactions are finished before disabling the device */
- pcie_wait_pending_transaction(dev);
-
pci_read_config_word(dev, PCI_COMMAND, &pci_command);
if (pci_command & PCI_COMMAND_MASTER) {
pci_command &= ~PCI_COMMAND_MASTER;
* accesses to the SMBus registers, with potentially bad effects. Thus you
* should be very careful when adding new entries: if SMM is accessing the
* Intel SMBus, this is a very good reason to leave it hidden.
+ *
+ * Likewise, many recent laptops use ACPI for thermal management. If the
+ * ACPI DSDT code accesses the SMBus, then Linux should not access it
+ * natively, and keeping the SMBus hidden is the right thing to do. If you
+ * are about to add an entry in the table below, please first disassemble
+ * the DSDT and double-check that there is no code accessing the SMBus.
*/
static int asus_hides_smbus;
case 0x12bf: /* HP xw4100 */
asus_hides_smbus = 1;
}
- else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
- switch (dev->subsystem_device) {
- case 0x099c: /* HP Compaq nx6110 */
- asus_hides_smbus = 1;
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
break;
case PCI_CLASS_BRIDGE_PCI:
- /* don't size subtractive decoding (transparent)
- * PCI-to-PCI bridges */
- if (bus->self->transparent)
- break;
pci_bridge_check_ranges(bus);
- /* fall through */
default:
pbus_size_io(bus);
/* If the bridge supports prefetchable range, size it
i < PNP_MAX_IRQ)
i++;
if (i >= PNP_MAX_IRQ && !warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of IRQ "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of IRQ "
"resources: %d \n", PNP_MAX_IRQ);
warned = 1;
return;
res->dma_resource[i].start = dma;
res->dma_resource[i].end = dma;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of DMA "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of DMA "
"resources: %d \n", PNP_MAX_DMA);
warned = 1;
}
res->port_resource[i].start = io;
res->port_resource[i].end = io + len - 1;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of IO "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of IO "
"resources: %d \n", PNP_MAX_PORT);
warned = 1;
}
res->mem_resource[i].start = mem;
res->mem_resource[i].end = mem + len - 1;
} else if (!warned) {
- printk(KERN_ERR "pnpacpi: exceeded the max number of mem "
+ printk(KERN_WARNING "pnpacpi: exceeded the max number of mem "
"resources: %d\n", PNP_MAX_MEM);
warned = 1;
}
#include <linux/reboot.h>
#include <asm/firmware.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
#include "vuart.h"
* controller, and bluetooth controller.
* @PS3_SM_WAKE_RTC:
* @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
* @PS3_SM_WAKE_P_O_R: Power on reset.
*
* Additional wakeup sources when specifying PS3_SM_NEXT_OP_SYS_SHUTDOWN.
PS3_SM_WAKE_DEFAULT = 0,
PS3_SM_WAKE_RTC = 0x00000040,
PS3_SM_WAKE_RTC_ERROR = 0x00000080,
+ PS3_SM_WAKE_W_O_L = 0x00000400,
PS3_SM_WAKE_P_O_R = 0x80000000,
};
+/**
+ * user_wake_sources - User specified wakeup sources.
+ *
+ * Logical OR of enum ps3_sys_manager_wake_source types.
+ */
+
+static u32 user_wake_sources = PS3_SM_WAKE_DEFAULT;
+
/**
* enum ps3_sys_manager_cmd - Command from system manager to guest.
*
return -EIO;
}
+static void ps3_sys_manager_fin(struct ps3_system_bus_device *dev)
+{
+ ps3_sys_manager_send_request_shutdown(dev);
+
+ pr_emerg("System Halted, OK to turn off power\n");
+
+ while (ps3_sys_manager_handle_msg(dev)) {
+ /* pause until next DEC interrupt */
+ lv1_pause(0);
+ }
+
+ while (1) {
+ /* pause, ignoring DEC interrupt */
+ lv1_pause(1);
+ }
+}
+
/**
* ps3_sys_manager_final_power_off - The final platform machine_power_off routine.
*
ps3_vuart_cancel_async(dev);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_SHUTDOWN,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
-
- pr_emerg("System Halted, OK to turn off power\n");
+ user_wake_sources);
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ ps3_sys_manager_fin(dev);
}
/**
ps3_sys_manager_send_attr(dev, 0);
ps3_sys_manager_send_next_op(dev, PS3_SM_NEXT_OP_SYS_REBOOT,
- PS3_SM_WAKE_DEFAULT);
- ps3_sys_manager_send_request_shutdown(dev);
+ user_wake_sources);
- pr_emerg("System Halted, OK to turn off power\n");
+ ps3_sys_manager_fin(dev);
+}
+
+/**
+ * ps3_sys_manager_get_wol - Get wake-on-lan setting.
+ */
+
+int ps3_sys_manager_get_wol(void)
+{
+ pr_debug("%s:%d\n", __func__, __LINE__);
+
+ return (user_wake_sources & PS3_SM_WAKE_W_O_L) != 0;
+}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_get_wol);
+
+/**
+ * ps3_sys_manager_set_wol - Set wake-on-lan setting.
+ */
+
+void ps3_sys_manager_set_wol(int state)
+{
+ static DEFINE_MUTEX(mutex);
+
+ mutex_lock(&mutex);
+
+ pr_debug("%s:%d: %d\n", __func__, __LINE__, state);
- while (1)
- ps3_sys_manager_handle_msg(dev);
+ if (state)
+ user_wake_sources |= PS3_SM_WAKE_W_O_L;
+ else
+ user_wake_sources &= ~PS3_SM_WAKE_W_O_L;
+ mutex_unlock(&mutex);
}
+EXPORT_SYMBOL_GPL(ps3_sys_manager_set_wol);
/**
* ps3_sys_manager_work - Asynchronous read handler.
*/
#include <linux/kernel.h>
+#include <asm/lv1call.h>
#include <asm/ps3.h>
/**
if (ps3_sys_manager_ops.power_off)
ps3_sys_manager_ops.power_off(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
- local_irq_disable();
- while (1)
- (void)0;
+ ps3_sys_manager_halt();
}
void ps3_sys_manager_restart(void)
if (ps3_sys_manager_ops.restart)
ps3_sys_manager_ops.restart(ps3_sys_manager_ops.dev);
- printk(KERN_EMERG "System Halted, OK to turn off power\n");
+ ps3_sys_manager_halt();
+}
+
+void ps3_sys_manager_halt(void)
+{
+ pr_emerg("System Halted, OK to turn off power\n");
local_irq_disable();
while (1)
- (void)0;
+ lv1_pause(1);
}
+
config RTC_DRV_S35390A
tristate "Seiko Instruments S-35390A"
+ select BITREVERSE
help
If you say yes here you will get support for the Seiko
Instruments S-35390A.
return 0;
}
-MODULE_ALIAS("at32ap700x_rtc");
+MODULE_ALIAS("platform:at32ap700x_rtc");
static struct platform_driver at32_rtc_driver = {
.remove = __exit_p(at32_rtc_remove),
MODULE_AUTHOR("Rick Bronson");
MODULE_DESCRIPTION("RTC driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_rtc");
MODULE_DESCRIPTION("Blackfin On-Chip Real Time Clock Driver");
MODULE_AUTHOR("Mike Frysinger <vapier@gentoo.org>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rtc-bfin");
cmos_do_shutdown();
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc_cmos");
+
static struct platform_driver cmos_platform_driver = {
.remove = __exit_p(cmos_platform_remove),
.shutdown = cmos_platform_shutdown,
MODULE_DESCRIPTION("DS1216 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1216");
module_init(ds1216_rtc_init);
module_exit(ds1216_rtc_exit);
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ds1511");
+
static struct platform_driver ds1511_rtc_driver = {
.probe = ds1511_rtc_probe,
.remove = __devexit_p(ds1511_rtc_remove),
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-ds1553");
+
static struct platform_driver ds1553_rtc_driver = {
.probe = ds1553_rtc_probe,
.remove = __devexit_p(ds1553_rtc_remove),
MODULE_DESCRIPTION("Dallas DS1742 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-ds1742");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:ep93xx-rtc");
+
static struct platform_driver ep93xx_rtc_platform_driver = {
.driver = {
.name = "ep93xx-rtc",
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:rtc-m48t59");
+
static struct platform_driver m48t59_rtc_driver = {
.driver = {
.name = "rtc-m48t59",
MODULE_DESCRIPTION("M48T86 RTC driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:rtc-m48t86");
module_init(m48t86_rtc_init);
module_exit(m48t86_rtc_exit);
rtc_write(0, OMAP_RTC_INTERRUPTS_REG);
}
-MODULE_ALIAS("omap_rtc");
+MODULE_ALIAS("platform:omap_rtc");
static struct platform_driver omap_rtc_driver = {
.probe = omap_rtc_probe,
.remove = __devexit_p(omap_rtc_remove),
MODULE_AUTHOR("kogiidena , Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
MODULE_DESCRIPTION("Ricoh RS5C313 RTC device driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
MODULE_DESCRIPTION("Samsung S3C RTC Driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-rtc");
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sa1100-rtc");
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Paul Mundt <lethal@linux-sh.org>, Jamie Lenehan <lenehan@twibble.org>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:stk17ta8");
+
static struct platform_driver stk17ta8_rtc_driver = {
.probe = stk17ta8_rtc_probe,
.remove = __devexit_p(stk17ta8_rtc_remove),
MODULE_DESCRIPTION("V3020 RTC");
MODULE_AUTHOR("Raphael Assenat");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:v3020");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:RTC");
+
static struct platform_driver rtc_platform_driver = {
.probe = rtc_probe,
.remove = __devexit_p(rtc_remove),
get_device(&shost->shost_gendev);
- if (shost->transportt->host_size &&
- (shost->shost_data = kzalloc(shost->transportt->host_size,
- GFP_KERNEL)) == NULL)
- goto out_del_classdev;
+ if (shost->transportt->host_size) {
+ shost->shost_data = kzalloc(shost->transportt->host_size,
+ GFP_KERNEL);
+ if (shost->shost_data == NULL) {
+ error = -ENOMEM;
+ goto out_del_classdev;
+ }
+ }
if (shost->transportt->create_work_queue) {
snprintf(shost->work_q_name, KOBJ_NAME_LEN, "scsi_wq_%d",
shost->host_no);
shost->work_q = create_singlethread_workqueue(
shost->work_q_name);
- if (!shost->work_q)
+ if (!shost->work_q) {
+ error = -EINVAL;
goto out_free_shost_data;
+ }
}
error = scsi_sysfs_add_host(shost);
case FANOUT_DEV:
error = sas_discover_root_expander(dev);
break;
-#ifdef CONFIG_SCSI_SAS_ATA
case SATA_DEV:
case SATA_PM:
+#ifdef CONFIG_SCSI_SAS_ATA
error = sas_discover_sata(dev);
break;
+#else
+ SAS_DPRINTK("ATA device seen but CONFIG_SCSI_SAS_ATA=N so cannot attach\n");
+ /* Fall through */
#endif
default:
error = -ENXIO;
#include <linux/dma-mapping.h>
#include <linux/ctype.h>
#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
#include <asm/io.h>
#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5.1"
-#define _MV_DUMP 0
+#define DRV_VERSION "0.5.2"
+#define _MV_DUMP 0
#define MVS_DISABLE_NVRAM
#define MVS_DISABLE_MSI
readl(regs + MVS_##reg); \
} while (0)
-#define MVS_ID_NOT_MAPPED 0xff
+#define MVS_ID_NOT_MAPPED 0x7f
#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
/* offset for D2H FIS in the Received FIS List Structure */
MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */
MVS_QUEUE_SIZE = 30, /* Support Queue depth */
+ MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */
};
/* unchangeable hardware details */
/* VSR */
/* PHYMODE 6 (CDB) */
- PHY_MODE6_DTL_SPEED = (1U << 27),
+ PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
+ PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
+ PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
+ PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
+ PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
+ PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
+ PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
+ PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
+ PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
+ PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
+ PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
+ PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
+ PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
+ PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
};
enum mvs_info_flags {
};
enum error_info_rec {
- CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
+ RSP_OVER = (1U << 29), /* rsp buffer overflow */
+ RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
+ UNK_FIS = (1U << 27), /* unknown FIS */
+ DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
+ SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
+ TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
+ R_ERR = (1U << 23), /* SATA returned R_ERR prim */
+ RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
+ XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
+ UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
+ DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
+ INTERLOCK = (1U << 15), /* interlock error */
+ NAK = (1U << 14), /* NAK rx'd */
+ ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
+ CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
+ OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
+ PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
+ NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
+ STP_RES_BSY = (1U << 8), /* STP resources busy */
+ BREAK = (1U << 7), /* break received */
+ BAD_DEST = (1U << 6), /* bad destination */
+ BAD_PROTO = (1U << 5), /* protocol not supported */
+ BAD_RATE = (1U << 4), /* cxn rate not supported */
+ WRONG_DEST = (1U << 3), /* wrong destination error */
+ CREDIT_TO = (1U << 2), /* credit timeout */
+ WDOG_TO = (1U << 1), /* watchdog timeout */
+ BUF_PAR = (1U << 0), /* buffer parity error */
+};
+
+enum error_info_rec_2 {
+ SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
+ GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
+ APP_CHK_ERR = (1U << 13), /* Application Check error */
+ REF_CHK_ERR = (1U << 12), /* Reference Check Error */
+ USR_BLK_NM = (1U << 0), /* User Block Number */
};
struct mvs_chip_info {
__le32 reserved[4];
};
-struct mvs_slot_info {
- struct sas_task *task;
- u32 n_elem;
- u32 tx;
-
- /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
- * and PRD table
- */
- void *buf;
- dma_addr_t buf_dma;
-#if _MV_DUMP
- u32 cmd_size;
-#endif
-
- void *response;
-};
-
struct mvs_port {
struct asd_sas_port sas_port;
u8 port_attached;
u8 taskfileset;
u8 wide_port_phymap;
+ struct list_head list;
};
struct mvs_phy {
u32 frame_rcvd_size;
u8 frame_rcvd[32];
u8 phy_attached;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_slot_info {
+ struct list_head list;
+ struct sas_task *task;
+ u32 n_elem;
+ u32 tx;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+#if _MV_DUMP
+ u32 cmd_size;
+#endif
+
+ void *response;
+ struct mvs_port *port;
};
struct mvs_info {
const struct mvs_chip_info *chip;
- unsigned long tags[MVS_SLOTS];
+ u8 tags[MVS_SLOTS];
struct mvs_slot_info slot_info[MVS_SLOTS];
/* further per-slot information */
struct mvs_phy phy[MVS_MAX_PHYS];
struct mvs_port port[MVS_MAX_PHYS];
-
- u32 can_queue; /* per adapter */
- u32 tag_out; /*Get*/
- u32 tag_in; /*Give*/
-};
-
-struct mvs_queue_task {
- struct list_head list;
-
- void *uldd_task;
+#ifdef MVS_USE_TASKLET
+ struct tasklet_struct tasklet;
+#endif
};
static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
static void mvs_detect_porttype(struct mvs_info *mvi, int i);
static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+static void mvs_release_task(struct mvs_info *mvi, int phy_no);
static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev);
+static int mvs_slave_configure(struct scsi_device *sdev);
static struct scsi_transport_template *mvs_stt;
.name = DRV_NAME,
.queuecommand = sas_queuecommand,
.target_alloc = sas_target_alloc,
- .slave_configure = sas_slave_configure,
+ .slave_configure = mvs_slave_configure,
.slave_destroy = sas_slave_destroy,
.scan_finished = mvs_scan_finished,
.scan_start = mvs_scan_start,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = mvs_sas_slave_alloc,
+ .slave_alloc = sas_slave_alloc,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
};
printk("\n");
}
+#if _MV_DUMP
static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
-#if _MV_DUMP
u32 offset;
struct pci_dev *pdev = mvi->pdev;
struct mvs_slot_info *slot = &mvi->slot_info[tag];
tag);
mvs_hexdump(32, (u8 *) slot->response,
(u32) slot->buf_dma + offset);
-#endif
}
+#endif
static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
enum sas_protocol proto)
{
#if _MV_DUMP
- u32 sz, w_ptr, r_ptr;
+ u32 sz, w_ptr;
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
/*Delivery Queue */
sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
- w_ptr = mr32(TX_PROD_IDX) & TX_RING_SZ_MASK;
- r_ptr = mr32(TX_CONS_IDX) & TX_RING_SZ_MASK;
+ w_ptr = slot->tx;
addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
dev_printk(KERN_DEBUG, &pdev->dev,
- "Delivery Queue Size=%04d , WRT_PTR=%04X , RD_PTR=%04X\n",
- sz, w_ptr, r_ptr);
+ "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
dev_printk(KERN_DEBUG, &pdev->dev,
"Delivery Queue Base Address=0x%llX (PA)"
"(tx_dma=0x%llX), Entry=%04d\n",
mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
(u32) mvi->tx_dma + sizeof(u32) * w_ptr);
/*Command List */
- addr = mr32(CMD_LIST_HI) << 16 << 16 | mr32(CMD_LIST_LO);
+ addr = mvi->slot_dma;
dev_printk(KERN_DEBUG, &pdev->dev,
"Command List Base Address=0x%llX (PA)"
"(slot_dma=0x%llX), Header=%03d\n",
- addr, mvi->slot_dma, tag);
+ addr, slot->buf_dma, tag);
dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
/*mvs_cmd_hdr */
mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
static void mvs_hba_cq_dump(struct mvs_info *mvi)
{
-#if _MV_DUMP
+#if (_MV_DUMP > 2)
u64 addr;
void __iomem *regs = mvi->regs;
struct pci_dev *pdev = mvi->pdev;
/*Completion Queue */
addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
- dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%08X\n",
- (u32) mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+ dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
+ mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
dev_printk(KERN_DEBUG, &pdev->dev,
"Completion List Base Address=0x%llX (PA), "
"CQ_Entry=%04d, CQ_WP=0x%08X\n",
return rc;
}
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct mvs_slot_info *slot;
+ slot = (struct mvs_slot_info *) task->lldd_task;
+ *tag = slot - mvi->slot_info;
+ return 1;
+ }
+ return 0;
+}
+
static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_in = (mvi->tag_in + 1) & (MVS_SLOTS - 1);
- mvi->tags[mvi->tag_in] = tag;
+ void *bitmap = (void *) &mvi->tags;
+ clear_bit(tag, bitmap);
}
static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
{
- mvi->tag_out = (mvi->tag_out - 1) & (MVS_SLOTS - 1);
+ mvs_tag_clear(mvi, tag);
+}
+
+static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+ void *bitmap = (void *) &mvi->tags;
+ set_bit(tag, bitmap);
}
static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
{
- if (mvi->tag_out != mvi->tag_in) {
- *tag_out = mvi->tags[mvi->tag_out];
- mvi->tag_out = (mvi->tag_out + 1) & (MVS_SLOTS - 1);
- return 0;
- }
- return -EBUSY;
+ unsigned int index, tag;
+ void *bitmap = (void *) &mvi->tags;
+
+ index = find_first_zero_bit(bitmap, MVS_SLOTS);
+ tag = index;
+ if (tag >= MVS_SLOTS)
+ return -SAS_QUEUE_FULL;
+ mvs_tag_set(mvi, tag);
+ *tag_out = tag;
+ return 0;
}
static void mvs_tag_init(struct mvs_info *mvi)
{
int i;
for (i = 0; i < MVS_SLOTS; ++i)
- mvi->tags[i] = i;
- mvi->tag_out = 0;
- mvi->tag_in = MVS_SLOTS - 1;
+ mvs_tag_clear(mvi, i);
}
#ifndef MVS_DISABLE_NVRAM
static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
{
struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
if (!phy->phy_attached)
return;
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+ }
+
if (phy->phy_type & PORT_TYPE_SAS) {
struct sas_identify_frame *id;
}
}
-static int mvs_sas_slave_alloc(struct scsi_device *scsi_dev)
+static int mvs_slave_configure(struct scsi_device *sdev)
{
- int rc;
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
- rc = sas_slave_alloc(scsi_dev);
+ if (ret)
+ return ret;
- return rc;
+ if (dev_is_sata(dev)) {
+ /* struct ata_port *ap = dev->sata_dev.ap; */
+ /* struct ata_device *adev = ap->link.device; */
+
+ /* clamp at no NCQ for the time being */
+ /* adev->flags |= ATA_DFLAG_NCQ_OFF; */
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ }
+ return 0;
}
-static void mvs_int_port(struct mvs_info *mvi, int port_no, u32 events)
+static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
{
struct pci_dev *pdev = mvi->pdev;
struct sas_ha_struct *sas_ha = &mvi->sas;
- struct mvs_phy *phy = &mvi->phy[port_no];
+ struct mvs_phy *phy = &mvi->phy[phy_no];
struct asd_sas_phy *sas_phy = &phy->sas_phy;
- phy->irq_status = mvs_read_port_irq_stat(mvi, port_no);
+ phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
/*
* events is port event now ,
* we need check the interrupt status which belongs to per port.
*/
dev_printk(KERN_DEBUG, &pdev->dev,
"Port %d Event = %X\n",
- port_no, phy->irq_status);
+ phy_no, phy->irq_status);
if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
- if (!mvs_is_phy_ready(mvi, port_no)) {
+ mvs_release_task(mvi, phy_no);
+ if (!mvs_is_phy_ready(mvi, phy_no)) {
sas_phy_disconnected(sas_phy);
sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Port %d Unplug Notice\n", phy_no);
+
} else
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
}
if (!(phy->irq_status & PHYEV_DEC_ERR)) {
if (phy->irq_status & PHYEV_COMWAKE) {
- u32 tmp = mvs_read_port_irq_mask(mvi, port_no);
- mvs_write_port_irq_mask(mvi, port_no,
+ u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
+ mvs_write_port_irq_mask(mvi, phy_no,
tmp | PHYEV_SIG_FIS);
}
if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
- phy->phy_status = mvs_is_phy_ready(mvi, port_no);
+ phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
if (phy->phy_status) {
- mvs_detect_porttype(mvi, port_no);
+ mvs_detect_porttype(mvi, phy_no);
if (phy->phy_type & PORT_TYPE_SATA) {
u32 tmp = mvs_read_port_irq_mask(mvi,
- port_no);
+ phy_no);
tmp &= ~PHYEV_SIG_FIS;
mvs_write_port_irq_mask(mvi,
- port_no, tmp);
+ phy_no, tmp);
}
- mvs_update_phyinfo(mvi, port_no, 0);
+ mvs_update_phyinfo(mvi, phy_no, 0);
sas_ha->notify_phy_event(sas_phy,
PHYE_OOB_DONE);
- mvs_bytes_dmaed(mvi, port_no);
+ mvs_bytes_dmaed(mvi, phy_no);
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"plugin interrupt but phy is gone\n");
mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
NULL);
}
- } else if (phy->irq_status & PHYEV_BROAD_CH)
+ } else if (phy->irq_status & PHYEV_BROAD_CH) {
+ mvs_release_task(mvi, phy_no);
sas_ha->notify_port_event(sas_phy,
PORTE_BROADCAST_RCVD);
+ }
}
- mvs_write_port_irq_stat(mvi, port_no, phy->irq_status);
+ mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
}
static void mvs_int_sata(struct mvs_info *mvi)
{
- /* FIXME */
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(INT_STAT_SRS);
+ mw32(INT_STAT_SRS, tmp & 0xFFFF);
+}
+
+static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ void __iomem *regs = mvi->regs;
+ struct domain_device *dev = task->dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ u32 reg_set, phy_mask;
+
+ if (!sas_protocol_ata(task->task_proto)) {
+ reg_set = 0;
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ sas_port->phy_mask;
+ } else {
+ reg_set = port->taskfileset;
+ phy_mask = sas_port->phy_mask;
+ }
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
+ (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT) |
+ (reg_set << TXQ_SRS_SHIFT));
+
+ mw32(TX_PROD_IDX, mvi->tx_prod);
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx, int err)
+{
+ struct mvs_port *port = mvi->slot_info[slot_idx].port;
+ struct task_status_struct *tstat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+ int stat = SAM_GOOD;
+
+ resp->frame_len = sizeof(struct dev_to_host_fis);
+ memcpy(&resp->ending_fis[0],
+ SATA_RECEIVED_D2H_FIS(port->taskfileset),
+ sizeof(struct dev_to_host_fis));
+ tstat->buf_valid_size = sizeof(*resp);
+ if (unlikely(err))
+ stat = SAS_PROTO_RESPONSE;
+ return stat;
}
-static void mvs_slot_free(struct mvs_info *mvi, struct sas_task *task,
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
struct mvs_slot_info *slot, u32 slot_idx)
{
if (!sas_protocol_ata(task->task_proto))
/* do nothing */
break;
}
-
+ list_del(&slot->list);
+ task->lldd_task = NULL;
slot->task = NULL;
- mvs_tag_clear(mvi, slot_idx);
+ slot->port = NULL;
}
-static void mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
u32 slot_idx)
{
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
- u64 err_dw0 = *(u32 *) slot->response;
- void __iomem *regs = mvi->regs;
- u32 tmp;
+ u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+ u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
+ int stat = SAM_CHECK_COND;
- if (err_dw0 & CMD_ISS_STPD)
- if (sas_protocol_ata(task->task_proto)) {
- tmp = mr32(INT_STAT_SRS);
- mw32(INT_STAT_SRS, tmp & 0xFFFF);
- }
+ if (err_dw1 & SLOT_BSY_ERR) {
+ stat = SAS_QUEUE_FULL;
+ mvs_slot_reset(mvi, task, slot_idx);
+ }
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ break;
+ case SAS_PROTOCOL_SMP:
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ if (err_dw0 & TFILE_ERR)
+ stat = mvs_sata_done(mvi, task, slot_idx, 1);
+ break;
+ default:
+ break;
+ }
- mvs_hba_sb_dump(mvi, slot_idx, task->task_proto);
+ mvs_hexdump(16, (u8 *) slot->response, 0);
+ return stat;
}
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc)
+static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
{
u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
struct sas_task *task = slot->task;
- struct task_status_struct *tstat = &task->task_status;
- struct mvs_port *port = &mvi->port[task->dev->port->id];
+ struct task_status_struct *tstat;
+ struct mvs_port *port;
bool aborted;
void *to;
+ if (unlikely(!task || !task->lldd_task))
+ return -1;
+
+ mvs_hba_cq_dump(mvi);
+
spin_lock(&task->task_state_lock);
aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
if (!aborted) {
}
spin_unlock(&task->task_state_lock);
- if (aborted)
+ if (aborted) {
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ mvs_slot_free(mvi, rx_desc);
return -1;
+ }
+ port = slot->port;
+ tstat = &task->task_status;
memset(tstat, 0, sizeof(*tstat));
tstat->resp = SAS_TASK_COMPLETE;
-
- if (unlikely(!port->port_attached)) {
- tstat->stat = SAS_PHY_DOWN;
+ if (unlikely(!port->port_attached || flags)) {
+ mvs_slot_err(mvi, task, slot_idx);
+ if (!sas_protocol_ata(task->task_proto))
+ tstat->stat = SAS_PHY_DOWN;
goto out;
}
/* error info record present */
- if ((rx_desc & RXQ_ERR) && (*(u64 *) slot->response)) {
- tstat->stat = SAM_CHECK_COND;
- mvs_slot_err(mvi, task, slot_idx);
+ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+ tstat->stat = mvs_slot_err(mvi, task, slot_idx);
goto out;
}
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
- struct ata_task_resp *resp =
- (struct ata_task_resp *)tstat->buf;
-
- if ((rx_desc & (RXQ_DONE | RXQ_ERR | RXQ_ATTN)) ==
- RXQ_DONE)
- tstat->stat = SAM_GOOD;
- else
- tstat->stat = SAM_CHECK_COND;
-
- resp->frame_len = sizeof(struct dev_to_host_fis);
- memcpy(&resp->ending_fis[0],
- SATA_RECEIVED_D2H_FIS(port->taskfileset),
- sizeof(struct dev_to_host_fis));
- if (resp->ending_fis[2] & ATA_ERR)
- mvs_hexdump(16, resp->ending_fis, 0);
+ tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
break;
}
}
out:
- mvs_slot_free(mvi, task, slot, slot_idx);
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ if (unlikely(tstat->stat != SAS_QUEUE_FULL))
+ mvs_slot_free(mvi, rx_desc);
+
+ spin_unlock(&mvi->lock);
task->task_done(task);
+ spin_lock(&mvi->lock);
return tstat->stat;
}
+static void mvs_release_task(struct mvs_info *mvi, int phy_no)
+{
+ struct list_head *pos, *n;
+ struct mvs_slot_info *slot;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct mvs_port *port = phy->port;
+ u32 rx_desc;
+
+ if (!port)
+ return;
+
+ list_for_each_safe(pos, n, &port->list) {
+ slot = container_of(pos, struct mvs_slot_info, list);
+ rx_desc = (u32) (slot - mvi->slot_info);
+ mvs_slot_complete(mvi, rx_desc, 1);
+ }
+}
+
static void mvs_int_full(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
* we don't have to stall the CPU reading that register.
* The actual RX ring is offset by one dword, due to this.
*/
- rx_prod_idx = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (rx_prod_idx == 0xfff) { /* h/w hasn't touched RX ring yet */
- mvi->rx_cons = 0xfff;
+ rx_prod_idx = mvi->rx_cons;
+ mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+ if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
return 0;
- }
/* The CMPL_Q may come late, read from register and try again
* note: if coalescing is enabled,
* it will need to read from register every time for sure
*/
if (mvi->rx_cons == rx_prod_idx)
- return 0;
+ mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
- if (mvi->rx_cons == 0xfff)
- mvi->rx_cons = MVS_RX_RING_SZ - 1;
+ if (mvi->rx_cons == rx_prod_idx)
+ return 0;
while (mvi->rx_cons != rx_prod_idx) {
/* increment our internal RX consumer pointer */
- mvi->rx_cons = (mvi->rx_cons + 1) & (MVS_RX_RING_SZ - 1);
+ rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
- rx_desc = le32_to_cpu(mvi->rx[mvi->rx_cons + 1]);
-
- mvs_hba_cq_dump(mvi);
+ rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
if (likely(rx_desc & RXQ_DONE))
- mvs_slot_complete(mvi, rx_desc);
+ mvs_slot_complete(mvi, rx_desc, 0);
if (rx_desc & RXQ_ATTN) {
attn = true;
dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
rx_desc);
} else if (rx_desc & RXQ_ERR) {
+ if (!(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
rx_desc);
+ } else if (rx_desc & RXQ_SLOT_RESET) {
+ dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
+ rx_desc);
+ mvs_slot_free(mvi, rx_desc);
}
}
return 0;
}
+#ifdef MVS_USE_TASKLET
+static void mvs_tasklet(unsigned long data)
+{
+ struct mvs_info *mvi = (struct mvs_info *) data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+
+#ifdef MVS_DISABLE_MSI
+ mvs_int_full(mvi);
+#else
+ mvs_int_rx(mvi, true);
+#endif
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+#endif
+
static irqreturn_t mvs_interrupt(int irq, void *opaque)
{
struct mvs_info *mvi = opaque;
stat = mr32(GBL_INT_STAT);
- /* clear CMD_CMPLT ASAP */
- mw32_f(INT_STAT, CINT_DONE);
-
if (stat == 0 || stat == 0xffffffff)
return IRQ_NONE;
+ /* clear CMD_CMPLT ASAP */
+ mw32_f(INT_STAT, CINT_DONE);
+
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_full(mvi);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
{
struct mvs_info *mvi = opaque;
+#ifndef MVS_USE_TASKLET
spin_lock(&mvi->lock);
mvs_int_rx(mvi, true);
spin_unlock(&mvi->lock);
-
+#else
+ tasklet_schedule(&mvi->tasklet);
+#endif
return IRQ_HANDLED;
}
#endif
return MVS_ID_NOT_MAPPED;
}
-static u32 mvs_get_ncq_tag(struct sas_task *task)
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
{
- u32 tag = 0;
struct ata_queued_cmd *qc = task->uldd_task;
- if (qc)
- tag = qc->tag;
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
- return tag;
+ return 0;
}
static int mvs_task_prep_ata(struct mvs_info *mvi,
hdr->flags = cpu_to_le32(flags);
/* FIXME: the low order order 5 bits for the TAG if enable NCQ */
- if (task->ata_task.use_ncq) {
- hdr->tags = cpu_to_le32(mvs_get_ncq_tag(task));
- /*Fill in task file */
- task->ata_task.fis.sector_count = hdr->tags << 3;
- } else
+ if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
+ task->ata_task.fis.sector_count |= hdr->tags << 3;
+ else
hdr->tags = cpu_to_le32(tag);
hdr->data_len = cpu_to_le32(task->total_xfer_len);
u32 flags;
u32 resp_len, req_len, i, tag = tei->tag;
const u32 max_resp_len = SB_RFB_MAX;
+ u8 phy_mask;
slot = &mvi->slot_info[tag];
+ phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
+ task->dev->port->phy_mask;
slot->tx = mvi->tx_prod;
mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
(TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
- (port->wide_port_phymap << TXQ_PHY_SHIFT));
+ (phy_mask << TXQ_PHY_SHIFT));
flags = MCH_RETRY;
if (task->ssp_task.enable_first_burst) {
void __iomem *regs = mvi->regs;
struct mvs_task_exec_info tei;
struct sas_task *t = task;
+ struct mvs_slot_info *slot;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
unsigned long flags;
u32 n = num, pass = 0;
spin_lock_irqsave(&mvi->lock, flags);
-
do {
+ dev = t->dev;
tei.port = &mvi->port[dev->port->id];
if (!tei.port->port_attached) {
- struct task_status_struct *ts = &t->task_status;
- ts->stat = SAS_PHY_DOWN;
- t->task_done(t);
- rc = 0;
- goto exec_exit;
+ if (sas_protocol_ata(t->task_proto)) {
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
}
+
if (!sas_protocol_ata(t->task_proto)) {
if (t->num_scatter) {
n_elem = pci_map_sg(mvi->pdev, t->scatter,
if (rc)
goto err_out;
- mvi->slot_info[tag].task = t;
- mvi->slot_info[tag].n_elem = n_elem;
- memset(mvi->slot_info[tag].buf, 0, MVS_SLOT_BUF_SZ);
+ slot = &mvi->slot_info[tag];
+ t->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
tei.task = t;
tei.hdr = &mvi->slot[tag];
tei.tag = tag;
if (rc)
goto err_out_tag;
+ slot->task = t;
+ slot->port = tei.port;
+ t->lldd_task = (void *) slot;
+ list_add_tail(&slot->list, &slot->port->list);
/* TODO: select normal or high priority */
spin_lock(&t->task_state_lock);
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
- if (n == 1) {
- spin_unlock_irqrestore(&mvi->lock, flags);
- mw32(TX_PROD_IDX, mvi->tx_prod);
- }
mvs_hba_memory_dump(mvi, tag, t->task_proto);
++pass;
mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-
- if (n == 1)
- break;
-
- t = list_entry(t->list.next, struct sas_task, list);
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
} while (--n);
- return 0;
+ rc = 0;
+ goto out_done;
err_out_tag:
mvs_tag_free(mvi, tag);
if (n_elem)
pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
t->data_dir);
-exec_exit:
+out_done:
if (pass)
mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
spin_unlock_irqrestore(&mvi->lock, flags);
static int mvs_task_abort(struct sas_task *task)
{
- int rc = 1;
+ int rc;
unsigned long flags;
struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
struct pci_dev *pdev = mvi->pdev;
+ int tag;
spin_lock_irqsave(&task->task_state_lock, flags);
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
rc = TMF_RESP_FUNC_COMPLETE;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
goto out_done;
}
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /*FIXME*/
- rc = TMF_RESP_FUNC_COMPLETE;
-
switch (task->task_proto) {
case SAS_PROTOCOL_SMP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
break;
case SAS_PROTOCOL_SSP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! ");
+ dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
break;
case SAS_PROTOCOL_SATA:
case SAS_PROTOCOL_STP:
case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
- dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! "
- "Dump D2H FIS: \n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
+#if _MV_DUMP
+ dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
mvs_hexdump(sizeof(struct host_to_dev_fis),
(void *)&task->ata_task.fis, 0);
dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
mvs_hexdump(16, task->ata_task.atapi_packet, 0);
+#endif
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
+ /* TODO */
+ ;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
break;
}
default:
break;
}
+
+ if (mvs_find_tag(mvi, task, &tag)) {
+ spin_lock_irqsave(&mvi->lock, flags);
+ mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+ if (!mvs_task_exec(task, 1, GFP_ATOMIC))
+ rc = TMF_RESP_FUNC_COMPLETE;
+ else
+ rc = TMF_RESP_FUNC_FAILED;
out_done:
return rc;
}
mvi->rx_fis, mvi->rx_fis_dma);
if (mvi->rx)
dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
mvi->rx, mvi->rx_dma);
if (mvi->slot)
dma_free_coherent(&mvi->pdev->dev,
return NULL;
spin_lock_init(&mvi->lock);
+#ifdef MVS_USE_TASKLET
+ tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
+#endif
mvi->pdev = pdev;
mvi->chip = chip;
mvs_phy_init(mvi, i);
arr_phy[i] = &mvi->phy[i].sas_phy;
arr_port[i] = &mvi->port[i].sas_port;
+ mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
+ mvi->port[i].wide_port_phymap = 0;
+ mvi->port[i].port_attached = 0;
+ INIT_LIST_HEAD(&mvi->port[i].list);
}
SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
mvi->sas.sas_phy = arr_phy;
mvi->sas.sas_port = arr_port;
mvi->sas.num_phys = chip->n_phy;
- mvi->sas.lldd_max_execute_num = MVS_CHIP_SLOT_SZ - 1;
+ mvi->sas.lldd_max_execute_num = 1;
mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
- mvi->can_queue = (MVS_CHIP_SLOT_SZ >> 1) - 1;
+ mvi->shost->can_queue = MVS_CAN_QUEUE;
+ mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
mvi->sas.lldd_ha = mvi;
mvi->sas.core.shost = mvi->shost;
memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
mvi->rx = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->rx) * MVS_RX_RING_SZ,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
&mvi->rx_dma, GFP_KERNEL);
if (!mvi->rx)
goto err_out;
- memset(mvi->rx, 0, sizeof(*mvi->rx) * MVS_RX_RING_SZ);
+ memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
mvi->rx[0] = cpu_to_le32(0xfff);
mvi->rx_cons = 0xfff;
mvs_cw32(regs, CMD_SAS_CTL0, tmp);
/* workaround for WDTIMEOUT , set to 550 ms */
- mvs_cw32(regs, CMD_WD_TIMER, 0xffffff);
+ mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
/* not to halt for different port op during wideport link change */
mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
{
u32 tmp;
struct mvs_phy *phy = &mvi->phy[i];
- struct mvs_port *port;
+ struct mvs_port *port = phy->port;;
tmp = mvs_read_phy_ctl(mvi, i);
if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
- if (!phy->port)
+ if (!port)
phy->phy_attached = 1;
return tmp;
}
- port = phy->port;
if (port) {
if (phy->phy_type & PORT_TYPE_SAS) {
port->wide_port_phymap &= ~(1U << i);
{
struct mvs_phy *phy = &mvi->phy[i];
struct pci_dev *pdev = mvi->pdev;
- u32 tmp, j;
+ u32 tmp;
u64 tmp64;
mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
sas_phy->linkrate =
(phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
-
- /* Updated attached_sas_addr */
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
- phy->att_dev_sas_addr =
- (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
- phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
- dev_printk(KERN_DEBUG, &pdev->dev,
- "phy[%d] Get Attached Address 0x%llX ,"
- " SAS Address 0x%llX\n",
- i, phy->att_dev_sas_addr, phy->dev_sas_addr);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Rate = %x , type = %d\n",
- sas_phy->linkrate, phy->phy_type);
-
-#if 1
- /*
- * If the device is capable of supporting a wide port
- * on its phys, it may configure the phys as a wide port.
- */
- if (phy->phy_type & PORT_TYPE_SAS)
- for (j = 0; j < mvi->chip->n_phy && j != i; ++j) {
- if ((mvi->phy[j].phy_attached) &&
- (mvi->phy[j].phy_type & PORT_TYPE_SAS))
- if (phy->att_dev_sas_addr ==
- mvi->phy[j].att_dev_sas_addr - 1) {
- phy->att_dev_sas_addr =
- mvi->phy[j].att_dev_sas_addr;
- break;
- }
- }
-
-#endif
-
- tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
- memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+ phy->minimum_linkrate =
+ (phy->phy_status &
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+ phy->maximum_linkrate =
+ (phy->phy_status &
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
if (phy->phy_type & PORT_TYPE_SAS) {
+ /* Updated attached_sas_addr */
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+ phy->att_dev_sas_addr =
+ (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+ phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
phy->identify.device_type =
} else if (phy->phy_type & PORT_TYPE_SATA) {
phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
if (mvs_is_sig_fis_received(phy->irq_status)) {
+ phy->att_dev_sas_addr = i; /* temp */
if (phy_st & PHY_OOB_DTCTD)
sas_phy->oob_mode = SATA_OOB_MODE;
phy->frame_rcvd_size =
} else {
dev_printk(KERN_DEBUG, &pdev->dev,
"No sig fis\n");
+ phy->phy_type &= ~(PORT_TYPE_SATA);
+ goto out_done;
}
}
+ tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
+ memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
+
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "phy[%d] Get Attached Address 0x%llX ,"
+ " SAS Address 0x%llX\n",
+ i, phy->att_dev_sas_addr, phy->dev_sas_addr);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "Rate = %x , type = %d\n",
+ sas_phy->linkrate, phy->phy_type);
+
/* workaround for HW phy decoding error on 1.5g disk drive */
mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
tmp = mvs_read_port_vsr_data(mvi, i);
if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
SAS_LINK_RATE_1_5_GBPS)
- tmp &= ~PHY_MODE6_DTL_SPEED;
+ tmp &= ~PHY_MODE6_LATECLK;
else
- tmp |= PHY_MODE6_DTL_SPEED;
+ tmp |= PHY_MODE6_LATECLK;
mvs_write_port_vsr_data(mvi, i, tmp);
}
+out_done:
if (get_st)
mvs_write_port_irq_stat(mvi, i, phy->irq_status);
}
spin_unlock_irqrestore(&mvi->lock, flags);
}
+static int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+ return TMF_RESP_FUNC_FAILED;
+}
+
static int __devinit mvs_hw_init(struct mvs_info *mvi)
{
void __iomem *regs = mvi->regs;
/* enable CMD/CMPL_Q/RESP mode */
mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
- /* re-enable interrupts globally */
- mvs_hba_interrupt_enable(mvi);
-
/* enable completion queue interrupt */
- tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM);
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
mw32(INT_MASK, tmp);
+ /* Enable SRS interrupt */
+ mw32(INT_MASK_SRS, 0xFF);
return 0;
}
mvs_print_info(mvi);
+ mvs_hba_interrupt_enable(mvi);
+
scsi_scan_host(mvi->shost);
return 0;
.lldd_execute_task = mvs_task_exec,
.lldd_control_phy = mvs_phy_control,
.lldd_abort_task = mvs_task_abort,
- .lldd_port_formed = mvs_port_formed
+ .lldd_port_formed = mvs_port_formed,
+ .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
};
static struct pci_device_id __devinitdata mvs_pci_table[] = {
{ PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
{ PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = 0x6440,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x6480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_6480,
+ },
{ PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
{ PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
cmd = kmem_cache_alloc(shost->cmd_pool->cmd_slab,
gfp_mask | shost->cmd_pool->gfp_mask);
+ if (likely(cmd)) {
+ buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
+ gfp_mask | shost->cmd_pool->gfp_mask);
+ if (likely(buf)) {
+ memset(cmd, 0, sizeof(*cmd));
+ cmd->sense_buffer = buf;
+ } else {
+ kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
+ cmd = NULL;
+ }
+ }
+
if (unlikely(!cmd)) {
unsigned long flags;
memset(cmd, 0, sizeof(*cmd));
cmd->sense_buffer = buf;
}
- } else {
- buf = kmem_cache_alloc(shost->cmd_pool->sense_slab,
- gfp_mask | shost->cmd_pool->gfp_mask);
- if (likely(buf)) {
- memset(cmd, 0, sizeof(*cmd));
- cmd->sense_buffer = buf;
- } else {
- kmem_cache_free(shost->cmd_pool->cmd_slab, cmd);
- cmd = NULL;
- }
}
return cmd;
}
if (sdev->request_queue) {
- bsg_unregister_queue(sdev->request_queue);
sdev->request_queue->queuedata = NULL;
/* user context needed to free queue */
scsi_free_queue(sdev->request_queue);
if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0)
return;
+ bsg_unregister_queue(sdev->request_queue);
class_device_unregister(&sdev->sdev_classdev);
transport_remove_device(dev);
device_del(dev);
.base_baud = 115200,
.uart_offset = 8,
},
- [pbn_b0_8_115200] = {
- .flags = FL_BASE0,
- .num_ports = 8,
- .base_baud = 115200,
- .uart_offset = 8,
- },
-
[pbn_b0_1_921600] = {
.flags = FL_BASE0,
.num_ports = 1,
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
+#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
static int (*atmel_open_hook)(struct uart_port *);
static void (*atmel_close_hook)(struct uart_port *);
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
int count;
+ /* nothing left to transmit? */
+ if (UART_GET_TCR(port))
+ return;
+
xmit->tail += pdc->ofs;
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += pdc->ofs;
pdc->ofs = 0;
- if (!uart_circ_empty(xmit)) {
- /* more to transmit - setup next transfer */
+ /* more to transmit - setup next transfer */
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ /* disable PDC transmit */
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
+ if (!uart_circ_empty(xmit)) {
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
/* re-enable PDC transmit and interrupts */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
UART_PUT_IER(port, ATMEL_US_ENDTX | ATMEL_US_TXBUFE);
- } else {
- /* nothing left to transmit - disable the transmitter */
-
- /* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
{
struct uart_port *port = &atmel_ports[co->index].uart;
unsigned int status, imr;
+ unsigned int pdc_tx;
/*
* First, save IMR and then disable interrupts
imr = UART_GET_IMR(port);
UART_PUT_IDR(port, ATMEL_US_RXRDY | ATMEL_US_TXRDY);
+ /* Store PDC transmit status and disable it */
+ pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+
uart_console_write(port, s, count, atmel_console_putchar);
/*
do {
status = UART_GET_CSR(port);
} while (!(status & ATMEL_US_TXRDY));
+
+ /* Restore PDC transmit status */
+ if (pdc_tx)
+ UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+
/* set interrupts back the way they were */
UART_PUT_IER(port, imr);
}
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
| UPF_FIXED_PORT;
port->dev = &ofdev->dev;
- port->custom_divisor = *clk / (16 * (*spd));
+ /* If current-speed was set, then try not to change it. */
+ if (spd)
+ port->custom_divisor = *clk / (16 * (*spd));
return 0;
}
MODULE_DESCRIPTION("Atmel AT32/AT91 SPI Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_spi");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:au1550-spi");
+
static struct platform_driver au1550_spi_drv = {
.remove = __exit_p(au1550_spi_remove),
.driver = {
return mpc52xx_psc_spi_do_remove(&dev->dev);
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpc52xx-psc-spi");
+
static struct platform_driver mpc52xx_psc_spi_platform_driver = {
.remove = __exit_p(mpc52xx_psc_spi_remove),
.driver = {
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap2_mcspi");
+
static struct platform_driver omap2_mcspi_driver = {
.driver = {
.name = "omap2_mcspi",
return status;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:omap_uwire");
+
static struct platform_driver uwire_driver = {
.driver = {
.name = "omap_uwire",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = __exit_p(uwire_remove),
MODULE_AUTHOR("Stephen Street");
MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-spi");
#define MAX_BUSES 3
static struct platform_driver driver = {
.driver = {
.name = "pxa2xx-spi",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = pxa2xx_spi_remove,
} else {
drv_data->len = transfer->len;
}
- dev_dbg(&drv_data->pdev->dev, "transfer: ",
- "drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ dev_dbg(&drv_data->pdev->dev,
+ "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
drv_data->write, chip->write, null_writer);
/* speed and width has been set on per message */
goto out_error_queue_alloc;
}
+ status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
+ if (status != 0) {
+ dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
+ goto out_error_queue_alloc;
+ }
+
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
goto out_error_queue_alloc;
}
- status = peripheral_request_list(drv_data->pin_req, DRV_NAME);
- if (status != 0) {
- dev_err(&pdev->dev, ": Requesting Peripherals failed\n");
- goto out_error;
- }
-
dev_info(dev, "%s, Version %s, regs_base@%p, dma channel@%d\n",
DRV_DESC, DRV_VERSION, drv_data->regs_base,
drv_data->dma_channel);
iounmap((void *) drv_data->regs_base);
out_error_ioremap:
out_error_get_res:
-out_error:
spi_master_put(master);
return status;
#define bfin5xx_spi_resume NULL
#endif /* CONFIG_PM */
-MODULE_ALIAS("bfin-spi-master"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:bfin-spi");
static struct platform_driver bfin5xx_spi_driver = {
.driver = {
.name = DRV_NAME,
#define spi_imx_resume NULL
#endif /* CONFIG_PM */
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_imx");
+
static struct platform_driver driver = {
.driver = {
.name = "spi_imx",
- .bus = &platform_bus_type,
.owner = THIS_MODULE,
},
.remove = __exit_p(spi_imx_remove),
return 0;
}
-MODULE_ALIAS("mpc83xx_spi"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:mpc83xx_spi");
static struct platform_driver mpc83xx_spi_driver = {
.remove = __exit_p(mpc83xx_spi_remove),
.driver = {
- .name = "mpc83xx_spi",
+ .name = "mpc83xx_spi",
+ .owner = THIS_MODULE,
},
};
#define s3c24xx_spi_resume NULL
#endif
-MODULE_ALIAS("s3c2410_spi"); /* for platform bus hotplug */
+MODULE_ALIAS("platform:s3c2410-spi");
static struct platform_driver s3c24xx_spidrv = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
#define s3c2410_spigpio_suspend NULL
#define s3c2410_spigpio_resume NULL
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_s3c24xx_gpio");
static struct platform_driver s3c2410_spigpio_drv = {
.probe = s3c2410_spigpio_probe,
MODULE_DESCRIPTION("SH SCI SPI Driver");
MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:spi_sh_sci");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:spi_txx9");
+
static struct platform_driver txx9spi_driver = {
.remove = __exit_p(txx9spi_remove),
.driver = {
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
static struct platform_driver xilinx_spi_driver = {
.probe = xilinx_spi_probe,
.remove = __devexit_p(xilinx_spi_remove),
clear_irq(bus, oldirq);
/* assign the new one */
- if (irq == 0)
- ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)));
-
- irqflag <<= ipsflag_irq_shift[irq];
- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
- ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ if (irq == 0) {
+ ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC)));
+ } else {
+ irqflag <<= ipsflag_irq_shift[irq];
+ irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]);
+ ssb_write32(mdev, SSB_IPSFLAG, irqflag);
+ }
}
static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
} else {
tmp = ssb_read32(dev, SSB_TPSFLAG);
tmp &= SSB_TPSFLAG_BPFLAG;
- intvec |= tmp;
+ intvec |= (1 << tmp);
}
ssb_write32(pdev, SSB_INTVEC, intvec);
}
goto out;
cc = &bus->chipco;
+
+ if (!cc->dev)
+ goto out;
+ if (cc->dev->id.revision < 5)
+ goto out;
+
ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
if (err)
vma->vm_flags |= VM_IO | VM_RESERVED;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
return remap_pfn_range(vma,
vma->vm_start,
idev->info->mem[mi].addr >> PAGE_SHIFT,
return -EINVAL;
}
- ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ if (dev->quirks & USB_QUIRK_NO_SET_INTF)
+ ret = -EPIPE;
+ else
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
alternate, interface, NULL, 0, 5000);
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
+ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
+
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
MODULE_DESCRIPTION("AT91 udc driver");
MODULE_AUTHOR("Thomas Rathbone, David Brownell");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_udc");
.remove = __exit_p(usba_udc_remove),
.driver = {
.name = "atmel_usba_udc",
+ .owner = THIS_MODULE,
},
};
MODULE_DESCRIPTION("Atmel USBA UDC driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:atmel_usba_udc");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:fsl-usb2-udc");
/* currently one config, two speeds */
case USB_REQ_SET_CONFIGURATION:
if (ctrl->bRequestType != 0)
- break;
+ goto unrecognized;
if (0 == (u8) w_value) {
value = 0;
dev->current_config = 0;
/* PXA automagically handles this request too */
case USB_REQ_GET_CONFIGURATION:
if (ctrl->bRequestType != 0x80)
- break;
+ goto unrecognized;
*(u8 *)req->buf = dev->current_config;
value = min (w_length, (u16) 1);
break;
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Mikko Lahteenmaki, Bo Henriksen");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lh7a40x_udc");
MODULE_DESCRIPTION("M66592 USB gadget driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:m66592_udc");
#define DRIVER_VERSION "18 Oct 2007"
.remove = __exit_p(m66592_remove),
.driver = {
.name = (char *) udc_name,
+ .owner = THIS_MODULE,
},
};
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:omap_udc");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
MODULE_LICENSE("GPL");
-
+MODULE_ALIAS("platform:pxa2xx-udc");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-usbgadget");
+MODULE_ALIAS("platform:s3c2440-usbgadget");
hcd->state = HC_STATE_QUIESCING;
}
ehci->command = ehci_readl(ehci, &ehci->regs->command);
- if (ehci->reclaim)
- end_unlink_async(ehci);
ehci_work(ehci);
/* Unlike other USB host controller types, EHCI doesn't have
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
+ if (ehci->reclaim)
+ end_unlink_async(ehci);
+
/* allow remote wakeup */
mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
break;
}
break;
+ case PCI_VENDOR_ID_VIA:
+ if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) {
+ u8 tmp;
+
+ /* The VT6212 defaults to a 1 usec EHCI sleep time which
+ * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes
+ * that sleep time use the conventional 10 usec.
+ */
+ pci_read_config_byte(pdev, 0x4b, &tmp);
+ if (tmp & 0x20)
+ break;
+ pci_write_config_byte(pdev, 0x4b, tmp | 0x20);
+ }
+ break;
}
ehci_reset(ehci);
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:isp116x-hcd");
+
static struct platform_driver isp116x_driver = {
.probe = isp116x_probe,
.remove = isp116x_remove,
.suspend = isp116x_suspend,
.resume = isp116x_resume,
.driver = {
- .name = (char *)hcd_name,
- },
+ .name = (char *)hcd_name,
+ .owner = THIS_MODULE,
+ },
};
/*-----------------------------------------------------------------*/
#define ohci_hcd_at91_drv_resume NULL
#endif
-MODULE_ALIAS("at91_ohci");
+MODULE_ALIAS("platform:at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.owner = THIS_MODULE,
},
};
-
},
};
+MODULE_ALIAS("platform:au1xxx-ohci");
#endif
.driver = {
.name = "ep93xx-ohci",
+ .owner = THIS_MODULE,
},
};
+MODULE_ALIAS("platform:ep93xx-ohci");
out:
kfree(seen);
if (ohci->eds_scheduled)
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
done:
spin_unlock_irqrestore(&ohci->lock, flags);
}
},
};
+MODULE_ALIAS("platform:lh7a404-ohci");
},
};
+MODULE_ALIAS("platform:ohci");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:usb-ohci");
+
static struct platform_driver usb_hcd_pnx4008_driver = {
.driver = {
.name = "usb-ohci",
+ .owner = THIS_MODULE,
},
.probe = usb_hcd_pnx4008_probe,
.remove = usb_hcd_pnx4008_remove,
return 0;
}
-MODULE_ALIAS("pnx8550-ohci");
+MODULE_ALIAS("platform:pnx8550-ohci");
static struct platform_driver ohci_hcd_pnx8550_driver = {
.driver = {
- .name = "pnx8550-ohci",
+ .name = "pnx8550-ohci",
+ .owner = THIS_MODULE,
},
.probe = ohci_hcd_pnx8550_drv_probe,
.remove = ohci_hcd_pnx8550_drv_remove,
},
};
+MODULE_ALIAS("platform:ppc-soc-ohci");
}
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:pxa27x-ohci");
static struct platform_driver ohci_hcd_pxa27x_driver = {
.probe = ohci_hcd_pxa27x_drv_probe,
#endif
.driver = {
.name = "pxa27x-ohci",
+ .owner = THIS_MODULE,
},
};
if (quirk_zfmicro(ohci)
&& (ed->type == PIPE_INTERRUPT)
&& !(ohci->eds_scheduled++))
- mod_timer(&ohci->unlink_watchdog, round_jiffies_relative(HZ));
+ mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
},
};
+MODULE_ALIAS("platform:s3c2410-ohci");
},
};
+MODULE_ALIAS("platform:sh_ohci");
.name = "sm501-usb",
},
};
+MODULE_ALIAS("platform:sm501-usb");
MODULE_DESCRIPTION("R8A66597 USB Host Controller Driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_ALIAS("platform:r8a66597_hcd");
#define DRIVER_VERSION "29 May 2007"
.resume = r8a66597_resume,
.driver = {
.name = (char *) hcd_name,
+ .owner = THIS_MODULE,
},
};
MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sl811-hcd");
#define DRIVER_VERSION "19 May 2005"
module_exit(u132_hcd_exit);
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:u132_hcd");
sg = kmalloc (nents * sizeof *sg, GFP_KERNEL);
if (!sg)
return NULL;
+ sg_init_table(sg, nents);
for (i = 0; i < nents; i++) {
char *buf;
}
/* kmalloc pages are always physically contiguous! */
- sg_init_one(&sg[i], buf, size);
+ sg_set_buf(&sg[i], buf, size);
switch (pattern) {
case 0:
{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
.description = "Keyspan - (without firmware)",
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.description = "Keyspan 1 port adapter",
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.description = "Keyspan 2 port adapter",
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
.description = "Keyspan 4 port adapter",
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
+ .num_interrupt_out = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.num_ports = 4,
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
#define PL2303_PRODUCT_ID_DCU11 0x1234
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
+#define PL2303_PRODUCT_ID_ALDIGA 0x0611
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.2.7"
+#define DRIVER_VERSION "v.1.2.8"
#define DRIVER_AUTHOR "Kevin Lloyd <linux@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
{ USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Thinkpad internal) */
+ { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780*/
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781*/
spinlock_t lock; /* lock the structure */
int outstanding_urbs; /* number of out urbs in flight */
- /* Input endpoints and buffer for this port */
+ /* Input endpoints and buffers for this port */
struct urb *in_urbs[N_IN_URB];
- char in_buffer[N_IN_URB][IN_BUFLEN];
+ char *in_buffer[N_IN_URB];
/* Settings for the port */
int rts_state; /* Handshaking pins (outputs) */
return -ENOMEM;
}
spin_lock_init(&portdata->lock);
+ for (j = 0; j < N_IN_URB; j++) {
+ portdata->in_buffer[j] = kmalloc(IN_BUFLEN, GFP_KERNEL);
+ if (!portdata->in_buffer[j]) {
+ for (--j; j >= 0; j--)
+ kfree(portdata->in_buffer[j]);
+ kfree(portdata);
+ return -ENOMEM;
+ }
+ }
usb_set_serial_port_data(port, portdata);
for (j = 0; j < N_IN_URB; j++) {
usb_kill_urb(portdata->in_urbs[j]);
usb_free_urb(portdata->in_urbs[j]);
- portdata->in_urbs[j] = NULL;
+ kfree(portdata->in_buffer[j]);
}
kfree(portdata);
usb_set_serial_port_data(port, NULL);
.description = "TI USB 3410 1 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ti_startup,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
- .num_bulk_out = 2,
+ .num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
.open = visor_open,
.close = visor_close,
/* Free driver structure */
us->extra_destructor(info);
+ kfree(info);
us->extra = NULL;
us->extra_destructor = NULL;
}
US_DEBUGP("Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
le32_to_cpu(bcs->Signature), bcs->Tag,
residue, bcs->Status);
- if (bcs->Tag != us->tag || bcs->Status > US_BULK_STAT_PHASE) {
+ if (!(bcs->Tag == us->tag || (us->flags & US_FL_BULK_IGNORE_TAG)) ||
+ bcs->Status > US_BULK_STAT_PHASE) {
US_DEBUGP("Bulk logical error\n");
return USB_STOR_TRANSPORT_ERROR;
}
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
+/*
+ * Patch by Constantin Baranov <const@tltsu.ru>
+ * Report by Andreas Koenecke.
+ * Motorola ROKR Z6.
+ */
+UNUSUAL_DEV( 0x22b8, 0x6426, 0x0101, 0x0101,
+ "Motorola",
+ "MSnc.",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY | US_FL_BULK_IGNORE_TAG),
+
/* Reported by Radovan Garabik <garabik@kassiopeia.juls.savba.sk> */
UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
"MPIO",
* Other flags can be set, and are documented in
* include/linux/mm.h
*/
- vma->vm_flags |= VM_MAYSHARE;
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
return 0;
}
int lq043_open_cnt;
int irq;
spinlock_t lock; /* lock */
+ u32 pseudo_pal[16];
};
static int nocursor;
}
-static int bfin_t350mcqb_request_ports(int action)
-{
- u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+static u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2,
P_PPI0_D3, P_PPI0_D4, P_PPI0_D5,
P_PPI0_D6, P_PPI0_D7, 0};
+static int bfin_t350mcqb_request_ports(int action)
+{
if (action) {
if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) {
printk(KERN_ERR "Requesting Peripherals faild\n");
* Other flags can be set, and are documented in
* include/linux/mm.h
*/
- vma->vm_flags |= VM_MAYSHARE;
+ vma->vm_flags |= VM_MAYSHARE | VM_SHARED;
return 0;
}
fbinfo->fbops = &bfin_t350mcqb_fb_ops;
- fbinfo->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
- if (!fbinfo->pseudo_palette) {
- printk(KERN_ERR DRIVER_NAME
- "Fail to allocate pseudo_palette\n");
-
- ret = -ENOMEM;
- goto out4;
- }
-
- memset(fbinfo->pseudo_palette, 0, sizeof(u32) * 16);
+ fbinfo->pseudo_palette = &info->pseudo_pal;
if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0)
< 0) {
"Fail to allocate colormap (%d entries)\n",
BFIN_LCD_NBR_PALETTE_ENTRIES);
ret = -EFAULT;
- goto out5;
+ goto out4;
}
if (bfin_t350mcqb_request_ports(1)) {
goto out7;
}
- if (request_irq(info->irq, (void *)bfin_t350mcqb_irq_error, IRQF_DISABLED,
- "PPI ERROR", info) < 0) {
+ ret = request_irq(info->irq, bfin_t350mcqb_irq_error, IRQF_DISABLED,
+ "PPI ERROR", info);
+ if (ret < 0) {
printk(KERN_ERR DRIVER_NAME
": unable to request PPI ERROR IRQ\n");
- ret = -EFAULT;
goto out7;
}
bfin_t350mcqb_request_ports(0);
out6:
fb_dealloc_cmap(&fbinfo->cmap);
-out5:
- kfree(fbinfo->pseudo_palette);
out4:
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_t350mcqbfb_info *info = fbinfo->par;
+ unregister_framebuffer(fbinfo);
+
free_dma(CH_PPI);
free_irq(info->irq, info);
dma_free_coherent(NULL, fbinfo->fix.smem_len, info->fb_buffer,
info->dma_handle);
- kfree(fbinfo->pseudo_palette);
fb_dealloc_cmap(&fbinfo->cmap);
#ifndef NO_BL_SUPPORT
backlight_device_unregister(bl_dev);
#endif
- unregister_framebuffer(fbinfo);
-
bfin_t350mcqb_request_ports(0);
+ platform_set_drvdata(pdev, NULL);
+ framebuffer_release(fbinfo);
+
printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n");
return 0;
struct pci_dev *pci_dev;
/* the IO mapping for the PCI config space */
- void *ioaddr;
+ void __iomem *ioaddr;
/* a list of queues so we can dispatch IRQs */
spinlock_t lock;
void *buf, unsigned len)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+ void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
u8 *ptr = buf;
int i;
const void *buf, unsigned len)
{
struct virtio_pci_device *vp_dev = to_vp_device(vdev);
- void *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
+ void __iomem *ioaddr = vp_dev->ioaddr + VIRTIO_PCI_CONFIG + offset;
const u8 *ptr = buf;
int i;
{
struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
+ unregister_virtio_device(&vp_dev->vdev);
free_irq(pci_dev->irq, vp_dev);
pci_set_drvdata(pci_dev, NULL);
pci_iounmap(pci_dev, vp_dev->ioaddr);
{
struct vring_virtqueue *vq = to_vvq(_vq);
- START_USE(vq);
- BUG_ON(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT);
vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT;
- END_USE(vq);
}
static bool vring_enable_cb(struct virtqueue *_vq)
#define at32_wdt_resume NULL
#endif
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:at32_wdt");
+
static struct platform_driver at32_wdt_driver = {
.remove = __exit_p(at32_wdt_remove),
.suspend = at32_wdt_suspend,
MODULE_DESCRIPTION("Watchdog driver for Atmel AT91RM9200");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:at91_wdt");
static struct platform_driver platform_wdt_driver = {
.driver = {
.name = "watchdog",
+ .owner = THIS_MODULE,
},
.probe = davinci_wdt_probe,
.remove = davinci_wdt_remove,
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
return val;
}
-static void
-superio_outw(int val, int reg)
-{
- outb(reg++, REG);
- outb((val >> 8) & 0xff, VAL);
- outb(reg, REG);
- outb(val & 0xff, VAL);
-}
-
static inline void
superio_select(int ldn)
{
superio_outb(config, WDT_CONFIG);
if (revision >= 0x08)
- superio_outw(units, WDT_TIMEOUT);
- else
- superio_outb(units, WDT_TIMEOUT);
+ superio_outb(units >> 8, WDT_TIMEOUT + 1);
+ superio_outb(units, WDT_TIMEOUT);
}
static int
superio_outb(0, WDT_CONFIG);
superio_outb(0, WDT_CONTROL);
+ if (revision >= 0x08)
+ superio_outb(0, WDT_TIMEOUT + 1);
superio_outb(0, WDT_TIMEOUT);
superio_exit();
MODULE_DESCRIPTION("Watchdog driver for KS8695");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:ks8695_wdt");
.remove = __devexit_p(mpc83xx_wdt_remove),
.driver = {
.name = "mpc83xx_wdt",
+ .owner = THIS_MODULE,
},
};
MODULE_DESCRIPTION("Driver for watchdog timer in MPC83xx uProcessor");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mpc83xx_wdt");
return 0;
}
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:mpcore_wdt");
+
static struct platform_driver mpcore_wdt_driver = {
.probe = mpcore_wdt_probe,
.remove = __devexit_p(mpcore_wdt_remove),
.probe = mtx1_wdt_probe,
.remove = mtx1_wdt_remove,
.driver.name = "mtx1-wdt",
+ .driver.owner = THIS_MODULE,
};
static int __init mtx1_wdt_init(void)
MODULE_DESCRIPTION("Driver for the MTX-1 watchdog");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:mtx1-wdt");
MODULE_DESCRIPTION("MV64x60 watchdog driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:" MV64x60_WDT_NAME);
MODULE_AUTHOR("George G. Davis");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:omap_wdt");
static struct platform_driver platform_wdt_driver = {
.driver = {
.name = "watchdog",
+ .owner = THIS_MODULE,
},
.probe = pnx4008_wdt_probe,
.remove = pnx4008_wdt_remove,
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:watchdog");
MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:s3c2410-wdt");
MODULE_DESCRIPTION("TXx9 Watchdog Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:txx9wdt");
static int grow_gnttab_list(unsigned int more_frames)
{
unsigned int new_nr_grant_frames, extra_entries, i;
+ unsigned int nr_glist_frames, new_nr_glist_frames;
new_nr_grant_frames = nr_grant_frames + more_frames;
extra_entries = more_frames * GREFS_PER_GRANT_FRAME;
- for (i = nr_grant_frames; i < new_nr_grant_frames; i++) {
+ nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ new_nr_glist_frames =
+ (new_nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ for (i = nr_glist_frames; i < new_nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_ATOMIC);
if (!gnttab_list[i])
goto grow_nomem;
return 0;
grow_nomem:
- for ( ; i >= nr_grant_frames; i--)
+ for ( ; i >= nr_glist_frames; i--)
free_page((unsigned long) gnttab_list[i]);
return -ENOMEM;
}
static int __devinit gnttab_init(void)
{
int i;
- unsigned int max_nr_glist_frames;
+ unsigned int max_nr_glist_frames, nr_glist_frames;
unsigned int nr_init_grefs;
if (!is_running_on_xen())
* grant reference free list on the current hypervisor.
*/
max_nr_glist_frames = (boot_max_nr_grant_frames *
- GREFS_PER_GRANT_FRAME /
- (PAGE_SIZE / sizeof(grant_ref_t)));
+ GREFS_PER_GRANT_FRAME / RPP);
gnttab_list = kmalloc(max_nr_glist_frames * sizeof(grant_ref_t *),
GFP_KERNEL);
if (gnttab_list == NULL)
return -ENOMEM;
- for (i = 0; i < nr_grant_frames; i++) {
+ nr_glist_frames = (nr_grant_frames * GREFS_PER_GRANT_FRAME + RPP - 1) / RPP;
+ for (i = 0; i < nr_glist_frames; i++) {
gnttab_list[i] = (grant_ref_t *)__get_free_page(GFP_KERNEL);
if (gnttab_list[i] == NULL)
goto ini_nomem;
If you want your Linux box to mount its whole root file system (the
one containing the directory /) from some other computer over the
net via NFS (presumably because your box doesn't have a hard disk),
- say Y. Read <file:Documentation/nfsroot.txt> for details. It is
- likely that in this case, you also want to say Y to "Kernel level IP
- autoconfiguration" so that your box can discover its network address
- at boot time.
+ say Y. Read <file:Documentation/filesystems/nfsroot.txt> for
+ details. It is likely that in this case, you also want to say Y to
+ "Kernel level IP autoconfiguration" so that your box can discover
+ its network address at boot time.
Most people say N here.
_enter("%s,%s", name, vllist);
+ down_write(&afs_cells_sem);
+ read_lock(&afs_cells_lock);
+ list_for_each_entry(cell, &afs_cells, link) {
+ if (strcasecmp(cell->name, name) == 0)
+ goto duplicate_name;
+ }
+ read_unlock(&afs_cells_lock);
+
cell = afs_cell_alloc(name, vllist);
if (IS_ERR(cell)) {
_leave(" = %ld", PTR_ERR(cell));
+ up_write(&afs_cells_sem);
return cell;
}
- down_write(&afs_cells_sem);
-
/* add a proc directory for this cell */
ret = afs_proc_cell_setup(cell);
if (ret < 0)
kfree(cell);
_leave(" = %d", ret);
return ERR_PTR(ret);
+
+duplicate_name:
+ read_unlock(&afs_cells_lock);
+ up_write(&afs_cells_sem);
+ return ERR_PTR(-EEXIST);
}
/*
extern int afs_mntpt_check_symlink(struct afs_vnode *, struct key *);
extern void afs_mntpt_kill_timer(void);
-extern void afs_umount_begin(struct vfsmount *, int);
/*
* proc.c
extern unsigned afs_debug;
#define dbgprintk(FMT,...) \
- printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+ printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
/* make sure we maintain the format strings, even when debugging is disabled */
static inline __attribute__((format(printf,1,2)))
cancel_delayed_work(&afs_mntpt_expiry_timer);
flush_scheduled_work();
}
-
-/*
- * begin unmount by attempting to remove all automounted mountpoints we added
- */
-void afs_umount_begin(struct vfsmount *vfsmnt, int flags)
-{
- shrink_submounts(vfsmnt, &afs_vfsmounts);
-}
.write_inode = afs_write_inode,
.destroy_inode = afs_destroy_inode,
.clear_inode = afs_clear_inode,
- .umount_begin = afs_umount_begin,
.put_super = afs_put_super,
.show_options = generic_show_options,
};
return 1;
}
- /*
- * Check if the user asked us to deliver the result through an
- * eventfd. The eventfd_signal() function is safe to be called
- * from IRQ context.
- */
- if (!IS_ERR(iocb->ki_eventfd))
- eventfd_signal(iocb->ki_eventfd, 1);
-
info = &ctx->ring_info;
/* add a completion event to the ring buffer.
kunmap_atomic(ring, KM_IRQ1);
pr_debug("added to ring %p at [%lu]\n", iocb, tail);
+
+ /*
+ * Check if the user asked us to deliver the result through an
+ * eventfd. The eventfd_signal() function is safe to be called
+ * from IRQ context.
+ */
+ if (!IS_ERR(iocb->ki_eventfd))
+ eventfd_signal(iocb->ki_eventfd, 1);
+
put_rq:
/* everything turned out well, dispose of the aiocb. */
ret = __aio_put_req(ctx, iocb);
put_ioctx(ioctx);
}
+ asmlinkage_protect(5, ret, ctx_id, min_nr, nr, events, timeout);
return ret;
}
if (IS_ERR(anon_inode_inode))
return -ENODEV;
- file = get_empty_filp();
- if (!file)
- return -ENFILE;
error = get_unused_fd();
if (error < 0)
- goto err_put_filp;
+ return error;
fd = error;
/*
dentry->d_flags &= ~DCACHE_UNHASHED;
d_instantiate(dentry, anon_inode_inode);
- file->f_path.mnt = mntget(anon_inode_mnt);
- file->f_path.dentry = dentry;
+ error = -ENFILE;
+ file = alloc_file(anon_inode_mnt, dentry,
+ FMODE_READ | FMODE_WRITE, fops);
+ if (!file)
+ goto err_dput;
file->f_mapping = anon_inode_inode->i_mapping;
file->f_pos = 0;
file->f_flags = O_RDWR;
- file->f_op = fops;
- file->f_mode = FMODE_READ | FMODE_WRITE;
file->f_version = 0;
file->private_data = priv;
*pfile = file;
return 0;
+err_dput:
+ dput(dentry);
err_put_unused_fd:
put_unused_fd(fd);
-err_put_filp:
- put_filp(file);
return error;
}
EXPORT_SYMBOL_GPL(anon_inode_getfd);
void mark_buffer_dirty(struct buffer_head *bh)
{
WARN_ON_ONCE(!buffer_uptodate(bh));
- if (!buffer_dirty(bh) && !test_set_buffer_dirty(bh))
+
+ /*
+ * Very *carefully* optimize the it-is-already-dirty case.
+ *
+ * Don't let the final "is it dirty" escape to before we
+ * perhaps modified the buffer.
+ */
+ if (buffer_dirty(bh)) {
+ smp_mb();
+ if (buffer_dirty(bh))
+ return;
+ }
+
+ if (!test_set_buffer_dirty(bh))
__set_page_dirty(bh->b_page, page_mapping(bh->b_page), 0);
}
struct inode *inode = page->mapping->host;
struct buffer_head *head = fsdata;
struct buffer_head *bh;
+ BUG_ON(fsdata != NULL && page_has_buffers(page));
- if (!PageMappedToDisk(page)) {
- if (unlikely(copied < len) && !page_has_buffers(page))
- attach_nobh_buffers(page, head);
- if (page_has_buffers(page))
- return generic_write_end(file, mapping, pos, len,
- copied, page, fsdata);
- }
+ if (unlikely(copied < len) && !page_has_buffers(page))
+ attach_nobh_buffers(page, head);
+ if (page_has_buffers(page))
+ return generic_write_end(file, mapping, pos, len,
+ copied, page, fsdata);
SetPageUptodate(page);
set_page_dirty(page);
{
mark_mounts_for_expiry(&cifs_dfs_automount_list);
mark_mounts_for_expiry(&cifs_dfs_automount_list);
- shrink_submounts(vfsmnt, &cifs_dfs_automount_list);
}
/**
return;
}
-static __le16 fill_ace_for_sid(struct cifs_ace *pntace,
+static __u16 fill_ace_for_sid(struct cifs_ace *pntace,
const struct cifs_sid *psid, __u64 nmode, umode_t bits)
{
int i;
static int set_chmod_dacl(struct cifs_acl *pndacl, struct cifs_sid *pownersid,
struct cifs_sid *pgrpsid, __u64 nmode)
{
- __le16 size = 0;
+ u16 size = 0;
struct cifs_acl *pnndacl;
pnndacl = (struct cifs_acl *)((char *)pndacl + sizeof(struct cifs_acl));
brelse(bh);
#ifdef DEBUG
- printk(KERN_DEBUG "EFS: read_inode(): inode %lu, extents %d, mode %o\n",
+ printk(KERN_DEBUG "EFS: efs_iget(): inode %lu, extents %d, mode %o\n",
inode->i_ino, in->numextents, inode->i_mode);
#endif
/* Find an unused file structure and return a pointer to it.
* Returns NULL, if there are no more free file structures or
* we run out of memory.
+ *
+ * Be very careful using this. You are responsible for
+ * getting write access to any mount that you might assign
+ * to this filp, if it is opened for write. If this is not
+ * done, you will imbalance int the mount's writer count
+ * and a warning at __fput() time.
*/
struct file *get_empty_filp(void)
{
if (inode->i_nlink > 0)
drop_nlink(inode);
- hfsplus_delete_inode(inode);
- if (inode->i_ino != cnid && !inode->i_nlink) {
- if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
- res = hfsplus_delete_cat(inode->i_ino, HFSPLUS_SB(sb).hidden_dir, NULL);
- if (!res)
- hfsplus_delete_inode(inode);
+ if (inode->i_ino == cnid)
+ clear_nlink(inode);
+ if (!inode->i_nlink) {
+ if (inode->i_ino != cnid) {
+ HFSPLUS_SB(sb).file_count--;
+ if (!atomic_read(&HFSPLUS_I(inode).opencnt)) {
+ res = hfsplus_delete_cat(inode->i_ino,
+ HFSPLUS_SB(sb).hidden_dir,
+ NULL);
+ if (!res)
+ hfsplus_delete_inode(inode);
+ } else
+ inode->i_flags |= S_DEAD;
} else
- inode->i_flags |= S_DEAD;
+ hfsplus_delete_inode(inode);
} else
- clear_nlink(inode);
+ HFSPLUS_SB(sb).file_count--;
inode->i_ctime = CURRENT_TIME_SEC;
mark_inode_dirty(inode);
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <linux/fs.h>
+#include <linux/ctype.h>
+#include <linux/dcache.h>
#include <linux/file.h>
-#include <linux/module.h>
+#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/list.h>
#include <linux/kernel.h>
-#include <linux/ctype.h>
-#include <linux/dcache.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mount.h>
+#include <linux/slab.h>
#include <linux/statfs.h>
+#include <linux/types.h>
#include <asm/uaccess.h>
-#include <asm/fcntl.h>
#include "os.h"
-static int init_inode(struct inode *inode, struct dentry *dentry);
+static struct inode *get_inode(struct super_block *, struct dentry *);
struct hppfs_data {
struct list_head list;
int i;
sb = dentry->d_sb;
- if((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
- return(0);
+ if ((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
+ return 0;
- for(i = 0; i < dentry->d_name.len; i++){
- if(!isdigit(dentry->d_name.name[i]))
- return(0);
+ for (i = 0; i < dentry->d_name.len; i++) {
+ if (!isdigit(dentry->d_name.name[i]))
+ return 0;
}
- return(1);
+ return 1;
}
static char *dentry_name(struct dentry *dentry, int extra)
len = 0;
parent = dentry;
- while(parent->d_parent != parent){
- if(is_pid(parent))
+ while (parent->d_parent != parent) {
+ if (is_pid(parent))
len += strlen("pid") + 1;
else len += parent->d_name.len + 1;
parent = parent->d_parent;
root = "proc";
len += strlen(root);
name = kmalloc(len + extra + 1, GFP_KERNEL);
- if(name == NULL) return(NULL);
+ if (name == NULL)
+ return NULL;
name[len] = '\0';
parent = dentry;
- while(parent->d_parent != parent){
- if(is_pid(parent)){
+ while (parent->d_parent != parent) {
+ if (is_pid(parent)) {
seg_name = "pid";
seg_len = strlen("pid");
}
parent = parent->d_parent;
}
strncpy(name, root, strlen(root));
- return(name);
+ return name;
}
-struct dentry_operations hppfs_dentry_ops = {
-};
-
static int file_removed(struct dentry *dentry, const char *file)
{
char *host_file;
int extra, fd;
extra = 0;
- if(file != NULL) extra += strlen(file) + 1;
+ if (file != NULL)
+ extra += strlen(file) + 1;
host_file = dentry_name(dentry, extra + strlen("/remove"));
- if(host_file == NULL){
- printk("file_removed : allocation failed\n");
- return(-ENOMEM);
+ if (host_file == NULL) {
+ printk(KERN_ERR "file_removed : allocation failed\n");
+ return -ENOMEM;
}
- if(file != NULL){
+ if (file != NULL) {
strcat(host_file, "/");
strcat(host_file, file);
}
fd = os_open_file(host_file, of_read(OPENFLAGS()), 0);
kfree(host_file);
- if(fd > 0){
+ if (fd > 0) {
os_close_file(fd);
- return(1);
- }
- return(0);
-}
-
-static void hppfs_read_inode(struct inode *ino)
-{
- struct inode *proc_ino;
-
- if(HPPFS_I(ino)->proc_dentry == NULL)
- return;
-
- proc_ino = HPPFS_I(ino)->proc_dentry->d_inode;
- ino->i_uid = proc_ino->i_uid;
- ino->i_gid = proc_ino->i_gid;
- ino->i_atime = proc_ino->i_atime;
- ino->i_mtime = proc_ino->i_mtime;
- ino->i_ctime = proc_ino->i_ctime;
- ino->i_ino = proc_ino->i_ino;
- ino->i_mode = proc_ino->i_mode;
- ino->i_nlink = proc_ino->i_nlink;
- ino->i_size = proc_ino->i_size;
- ino->i_blocks = proc_ino->i_blocks;
-}
-
-static struct inode *hppfs_iget(struct super_block *sb)
-{
- struct inode *inode;
-
- inode = iget_locked(sb, 0);
- if (!inode)
- return ERR_PTR(-ENOMEM);
- if (inode->i_state & I_NEW) {
- hppfs_read_inode(inode);
- unlock_new_inode(inode);
+ return 1;
}
- return inode;
+ return 0;
}
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
int err, deleted;
deleted = file_removed(dentry, NULL);
- if(deleted < 0)
- return(ERR_PTR(deleted));
- else if(deleted)
- return(ERR_PTR(-ENOENT));
+ if (deleted < 0)
+ return ERR_PTR(deleted);
+ else if (deleted)
+ return ERR_PTR(-ENOENT);
err = -ENOMEM;
parent = HPPFS_I(ino)->proc_dentry;
mutex_lock(&parent->d_inode->i_mutex);
proc_dentry = d_lookup(parent, &dentry->d_name);
- if(proc_dentry == NULL){
+ if (proc_dentry == NULL) {
proc_dentry = d_alloc(parent, &dentry->d_name);
- if(proc_dentry == NULL){
+ if (proc_dentry == NULL) {
mutex_unlock(&parent->d_inode->i_mutex);
goto out;
}
new = (*parent->d_inode->i_op->lookup)(parent->d_inode,
proc_dentry, NULL);
- if(new){
+ if (new) {
dput(proc_dentry);
proc_dentry = new;
}
}
mutex_unlock(&parent->d_inode->i_mutex);
- if(IS_ERR(proc_dentry))
- return(proc_dentry);
+ if (IS_ERR(proc_dentry))
+ return proc_dentry;
- inode = hppfs_iget(ino->i_sb);
- if (IS_ERR(inode)) {
- err = PTR_ERR(inode);
+ err = -ENOMEM;
+ inode = get_inode(ino->i_sb, proc_dentry);
+ if (!inode)
goto out_dput;
- }
-
- err = init_inode(inode, proc_dentry);
- if(err)
- goto out_put;
-
- hppfs_read_inode(inode);
d_add(dentry, inode);
- dentry->d_op = &hppfs_dentry_ops;
- return(NULL);
+ return NULL;
- out_put:
- iput(inode);
out_dput:
dput(proc_dentry);
out:
- return(ERR_PTR(err));
+ return ERR_PTR(err);
}
static const struct inode_operations hppfs_file_iops = {
read = file->f_path.dentry->d_inode->i_fop->read;
- if(!is_user)
+ if (!is_user)
set_fs(KERNEL_DS);
n = (*read)(file, buf, count, &file->f_pos);
- if(!is_user)
+ if (!is_user)
set_fs(USER_DS);
- if(ppos) *ppos = file->f_pos;
+ if (ppos)
+ *ppos = file->f_pos;
return n;
}
n = -ENOMEM;
new_buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if(new_buf == NULL){
- printk("hppfs_read_file : kmalloc failed\n");
+ if (new_buf == NULL) {
+ printk(KERN_ERR "hppfs_read_file : kmalloc failed\n");
goto out;
}
n = 0;
- while(count > 0){
+ while (count > 0) {
cur = min_t(ssize_t, count, PAGE_SIZE);
err = os_read_file(fd, new_buf, cur);
- if(err < 0){
- printk("hppfs_read : read failed, errno = %d\n",
- err);
+ if (err < 0) {
+ printk(KERN_ERR "hppfs_read : read failed, "
+ "errno = %d\n", err);
n = err;
goto out_free;
- }
- else if(err == 0)
+ } else if (err == 0)
break;
- if(copy_to_user(buf, new_buf, err)){
+ if (copy_to_user(buf, new_buf, err)) {
n = -EFAULT;
goto out_free;
}
loff_t off;
int err;
- if(hppfs->contents != NULL){
- if(*ppos >= hppfs->len) return(0);
+ if (hppfs->contents != NULL) {
+ if (*ppos >= hppfs->len)
+ return 0;
data = hppfs->contents;
off = *ppos;
- while(off >= sizeof(data->contents)){
+ while (off >= sizeof(data->contents)) {
data = list_entry(data->list.next, struct hppfs_data,
list);
off -= sizeof(data->contents);
}
- if(off + count > hppfs->len)
+ if (off + count > hppfs->len)
count = hppfs->len - off;
copy_to_user(buf, &data->contents[off], count);
*ppos += count;
- }
- else if(hppfs->host_fd != -1){
+ } else if (hppfs->host_fd != -1) {
err = os_seek_file(hppfs->host_fd, *ppos);
- if(err){
- printk("hppfs_read : seek failed, errno = %d\n", err);
- return(err);
+ if (err) {
+ printk(KERN_ERR "hppfs_read : seek failed, "
+ "errno = %d\n", err);
+ return err;
}
count = hppfs_read_file(hppfs->host_fd, buf, count);
- if(count > 0)
+ if (count > 0)
*ppos += count;
}
else count = read_proc(hppfs->proc_file, buf, count, ppos, 1);
- return(count);
+ return count;
}
static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
err = (*write)(proc_file, buf, len, &proc_file->f_pos);
file->f_pos = proc_file->f_pos;
- return(err);
+ return err;
}
static int open_host_sock(char *host_file, int *filter_out)
strcpy(end, "/rw");
*filter_out = 1;
fd = os_connect_socket(host_file);
- if(fd > 0)
- return(fd);
+ if (fd > 0)
+ return fd;
strcpy(end, "/r");
*filter_out = 0;
fd = os_connect_socket(host_file);
- return(fd);
+ return fd;
}
static void free_contents(struct hppfs_data *head)
struct hppfs_data *data;
struct list_head *ele, *next;
- if(head == NULL) return;
+ if (head == NULL)
+ return;
- list_for_each_safe(ele, next, &head->list){
+ list_for_each_safe(ele, next, &head->list) {
data = list_entry(ele, struct hppfs_data, list);
kfree(data);
}
err = -ENOMEM;
data = kmalloc(sizeof(*data), GFP_KERNEL);
- if(data == NULL){
- printk("hppfs_get_data : head allocation failed\n");
+ if (data == NULL) {
+ printk(KERN_ERR "hppfs_get_data : head allocation failed\n");
goto failed;
}
head = data;
*size_out = 0;
- if(filter){
- while((n = read_proc(proc_file, data->contents,
+ if (filter) {
+ while ((n = read_proc(proc_file, data->contents,
sizeof(data->contents), NULL, 0)) > 0)
os_write_file(fd, data->contents, n);
err = os_shutdown_socket(fd, 0, 1);
- if(err){
- printk("hppfs_get_data : failed to shut down "
+ if (err) {
+ printk(KERN_ERR "hppfs_get_data : failed to shut down "
"socket\n");
goto failed_free;
}
}
- while(1){
+ while (1) {
n = os_read_file(fd, data->contents, sizeof(data->contents));
- if(n < 0){
+ if (n < 0) {
err = n;
- printk("hppfs_get_data : read failed, errno = %d\n",
- err);
+ printk(KERN_ERR "hppfs_get_data : read failed, "
+ "errno = %d\n", err);
goto failed_free;
- }
- else if(n == 0)
+ } else if (n == 0)
break;
*size_out += n;
- if(n < sizeof(data->contents))
+ if (n < sizeof(data->contents))
break;
new = kmalloc(sizeof(*data), GFP_KERNEL);
- if(new == 0){
- printk("hppfs_get_data : data allocation failed\n");
+ if (new == 0) {
+ printk(KERN_ERR "hppfs_get_data : data allocation "
+ "failed\n");
err = -ENOMEM;
goto failed_free;
}
list_add(&new->list, &data->list);
data = new;
}
- return(head);
+ return head;
failed_free:
free_contents(head);
failed:
- return(ERR_PTR(err));
+ return ERR_PTR(err);
}
static struct hppfs_private *hppfs_data(void)
struct hppfs_private *data;
data = kmalloc(sizeof(*data), GFP_KERNEL);
- if(data == NULL)
- return(data);
+ if (data == NULL)
+ return data;
*data = ((struct hppfs_private ) { .host_fd = -1,
.len = -1,
.contents = NULL } );
- return(data);
+ return data;
}
static int file_mode(int fmode)
{
- if(fmode == (FMODE_READ | FMODE_WRITE))
- return(O_RDWR);
- if(fmode == FMODE_READ)
- return(O_RDONLY);
- if(fmode == FMODE_WRITE)
- return(O_WRONLY);
- return(0);
+ if (fmode == (FMODE_READ | FMODE_WRITE))
+ return O_RDWR;
+ if (fmode == FMODE_READ)
+ return O_RDONLY;
+ if (fmode == FMODE_WRITE)
+ return O_WRONLY;
+ return 0;
}
static int hppfs_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
char *host_file;
int err, fd, type, filter;
err = -ENOMEM;
data = hppfs_data();
- if(data == NULL)
+ if (data == NULL)
goto out;
host_file = dentry_name(file->f_path.dentry, strlen("/rw"));
- if(host_file == NULL)
+ if (host_file == NULL)
goto out_free2;
proc_dentry = HPPFS_I(inode)->proc_dentry;
+ proc_mnt = inode->i_sb->s_fs_info;
/* XXX This isn't closed anywhere */
- data->proc_file = dentry_open(dget(proc_dentry), NULL,
+ data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
file_mode(file->f_mode));
err = PTR_ERR(data->proc_file);
- if(IS_ERR(data->proc_file))
+ if (IS_ERR(data->proc_file))
goto out_free1;
type = os_file_type(host_file);
- if(type == OS_TYPE_FILE){
+ if (type == OS_TYPE_FILE) {
fd = os_open_file(host_file, of_read(OPENFLAGS()), 0);
- if(fd >= 0)
+ if (fd >= 0)
data->host_fd = fd;
- else printk("hppfs_open : failed to open '%s', errno = %d\n",
- host_file, -fd);
+ else
+ printk(KERN_ERR "hppfs_open : failed to open '%s', "
+ "errno = %d\n", host_file, -fd);
data->contents = NULL;
- }
- else if(type == OS_TYPE_DIR){
+ } else if (type == OS_TYPE_DIR) {
fd = open_host_sock(host_file, &filter);
- if(fd > 0){
+ if (fd > 0) {
data->contents = hppfs_get_data(fd, filter,
data->proc_file,
file, &data->len);
- if(!IS_ERR(data->contents))
+ if (!IS_ERR(data->contents))
data->host_fd = fd;
- }
- else printk("hppfs_open : failed to open a socket in "
- "'%s', errno = %d\n", host_file, -fd);
+ } else
+ printk(KERN_ERR "hppfs_open : failed to open a socket "
+ "in '%s', errno = %d\n", host_file, -fd);
}
kfree(host_file);
file->private_data = data;
- return(0);
+ return 0;
out_free1:
kfree(host_file);
free_contents(data->contents);
kfree(data);
out:
- return(err);
+ return err;
}
static int hppfs_dir_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
int err;
err = -ENOMEM;
data = hppfs_data();
- if(data == NULL)
+ if (data == NULL)
goto out;
proc_dentry = HPPFS_I(inode)->proc_dentry;
- data->proc_file = dentry_open(dget(proc_dentry), NULL,
+ proc_mnt = inode->i_sb->s_fs_info;
+ data->proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt),
file_mode(file->f_mode));
err = PTR_ERR(data->proc_file);
- if(IS_ERR(data->proc_file))
+ if (IS_ERR(data->proc_file))
goto out_free;
file->private_data = data;
- return(0);
+ return 0;
out_free:
kfree(data);
out:
- return(err);
+ return err;
}
static loff_t hppfs_llseek(struct file *file, loff_t off, int where)
loff_t ret;
llseek = proc_file->f_path.dentry->d_inode->i_fop->llseek;
- if(llseek != NULL){
+ if (llseek != NULL) {
ret = (*llseek)(proc_file, off, where);
- if(ret < 0)
- return(ret);
+ if (ret < 0)
+ return ret;
}
- return(default_llseek(file, off, where));
+ return default_llseek(file, off, where);
}
static const struct file_operations hppfs_file_fops = {
{
struct hppfs_dirent *dirent = d;
- if(file_removed(dirent->dentry, name))
- return(0);
+ if (file_removed(dirent->dentry, name))
+ return 0;
- return((*dirent->filldir)(dirent->vfs_dirent, name, size, offset,
- inode, type));
+ return (*dirent->filldir)(dirent->vfs_dirent, name, size, offset,
+ inode, type);
}
static int hppfs_readdir(struct file *file, void *ent, filldir_t filldir)
struct hppfs_dirent dirent = ((struct hppfs_dirent)
{ .vfs_dirent = ent,
.filldir = filldir,
- .dentry = file->f_path.dentry } );
+ .dentry = file->f_path.dentry
+ });
int err;
readdir = proc_file->f_path.dentry->d_inode->i_fop->readdir;
err = (*readdir)(proc_file, &dirent, hppfs_filldir);
file->f_pos = proc_file->f_pos;
- return(err);
+ return err;
}
static int hppfs_fsync(struct file *file, struct dentry *dentry, int datasync)
{
- return(0);
+ return 0;
}
static const struct file_operations hppfs_dir_fops = {
sf->f_files = 0;
sf->f_ffree = 0;
sf->f_type = HPPFS_SUPER_MAGIC;
- return(0);
+ return 0;
}
static struct inode *hppfs_alloc_inode(struct super_block *sb)
struct hppfs_inode_info *hi;
hi = kmalloc(sizeof(*hi), GFP_KERNEL);
- if(hi == NULL)
- return(NULL);
+ if (!hi)
+ return NULL;
- *hi = ((struct hppfs_inode_info) { .proc_dentry = NULL });
+ hi->proc_dentry = NULL;
inode_init_once(&hi->vfs_inode);
- return(&hi->vfs_inode);
+ return &hi->vfs_inode;
}
void hppfs_delete_inode(struct inode *ino)
kfree(HPPFS_I(inode));
}
+static void hppfs_put_super(struct super_block *sb)
+{
+ mntput(sb->s_fs_info);
+}
+
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
.delete_inode = hppfs_delete_inode,
.statfs = hppfs_statfs,
+ .put_super = hppfs_put_super,
};
-static int hppfs_readlink(struct dentry *dentry, char __user *buffer, int buflen)
+static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
+ int buflen)
{
struct file *proc_file;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
int ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_file = dentry_open(dget(proc_dentry), NULL, O_RDONLY);
+ proc_mnt = dentry->d_sb->s_fs_info;
+
+ proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
if (IS_ERR(proc_file))
return PTR_ERR(proc_file);
{
struct file *proc_file;
struct dentry *proc_dentry;
+ struct vfsmount *proc_mnt;
void *ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_file = dentry_open(dget(proc_dentry), NULL, O_RDONLY);
+ proc_mnt = dentry->d_sb->s_fs_info;
+
+ proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
if (IS_ERR(proc_file))
return proc_file;
.follow_link = hppfs_follow_link,
};
-static int init_inode(struct inode *inode, struct dentry *dentry)
+static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
{
- if(S_ISDIR(dentry->d_inode->i_mode)){
+ struct inode *proc_ino = dentry->d_inode;
+ struct inode *inode = new_inode(sb);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ if (S_ISDIR(dentry->d_inode->i_mode)) {
inode->i_op = &hppfs_dir_iops;
inode->i_fop = &hppfs_dir_fops;
- }
- else if(S_ISLNK(dentry->d_inode->i_mode)){
+ } else if (S_ISLNK(dentry->d_inode->i_mode)) {
inode->i_op = &hppfs_link_iops;
inode->i_fop = &hppfs_file_fops;
- }
- else {
+ } else {
inode->i_op = &hppfs_file_iops;
inode->i_fop = &hppfs_file_fops;
}
HPPFS_I(inode)->proc_dentry = dentry;
- return(0);
+ inode->i_uid = proc_ino->i_uid;
+ inode->i_gid = proc_ino->i_gid;
+ inode->i_atime = proc_ino->i_atime;
+ inode->i_mtime = proc_ino->i_mtime;
+ inode->i_ctime = proc_ino->i_ctime;
+ inode->i_ino = proc_ino->i_ino;
+ inode->i_mode = proc_ino->i_mode;
+ inode->i_nlink = proc_ino->i_nlink;
+ inode->i_size = proc_ino->i_size;
+ inode->i_blocks = proc_ino->i_blocks;
+
+ return 0;
}
static int hppfs_fill_super(struct super_block *sb, void *d, int silent)
{
struct inode *root_inode;
- struct file_system_type *procfs;
- struct super_block *proc_sb;
- int err;
+ struct vfsmount *proc_mnt;
+ int err = -ENOENT;
- err = -ENOENT;
- procfs = get_fs_type("proc");
- if(procfs == NULL)
+ proc_mnt = do_kern_mount("proc", 0, "proc", NULL);
+ if (IS_ERR(proc_mnt))
goto out;
- if(list_empty(&procfs->fs_supers))
- goto out;
-
- proc_sb = list_entry(procfs->fs_supers.next, struct super_block,
- s_instances);
-
sb->s_blocksize = 1024;
sb->s_blocksize_bits = 10;
sb->s_magic = HPPFS_SUPER_MAGIC;
sb->s_op = &hppfs_sbops;
-
- root_inode = hppfs_iget(sb);
- if (IS_ERR(root_inode)) {
- err = PTR_ERR(root_inode);
- goto out;
- }
-
- err = init_inode(root_inode, proc_sb->s_root);
- if(err)
- goto out_put;
+ sb->s_fs_info = proc_mnt;
err = -ENOMEM;
- sb->s_root = d_alloc_root(root_inode);
- if(sb->s_root == NULL)
- goto out_put;
+ root_inode = get_inode(sb, proc_mnt->mnt_sb->s_root);
+ if (!root_inode)
+ goto out_mntput;
- hppfs_read_inode(root_inode);
+ sb->s_root = d_alloc_root(root_inode);
+ if (!sb->s_root)
+ goto out_iput;
- return(0);
+ return 0;
- out_put:
+ out_iput:
iput(root_inode);
+ out_mntput:
+ mntput(proc_mnt);
out:
return(err);
}
static int __init init_hppfs(void)
{
- return(register_filesystem(&hppfs_type));
+ return register_filesystem(&hppfs_type);
}
static void __exit exit_hppfs(void)
module_init(init_hppfs)
module_exit(exit_hppfs)
MODULE_LICENSE("GPL");
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
FMODE_WRITE | FMODE_READ,
&hugetlbfs_file_operations);
if (!file)
- goto out_inode;
+ goto out_dentry; /* inode is already attached */
return file;
{
int retval;
- J_ASSERT(journal_head_cache == 0);
+ J_ASSERT(journal_head_cache == NULL);
journal_head_cache = kmem_cache_create("journal_head",
sizeof(struct journal_head),
0, /* offset */
SLAB_TEMPORARY, /* flags */
NULL); /* ctor */
retval = 0;
- if (journal_head_cache == 0) {
+ if (!journal_head_cache) {
retval = -ENOMEM;
printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
}
0,
SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
NULL);
- if (revoke_record_cache == 0)
+ if (!revoke_record_cache)
return -ENOMEM;
revoke_table_cache = kmem_cache_create("revoke_table",
sizeof(struct jbd_revoke_table_s),
0, SLAB_TEMPORARY, NULL);
- if (revoke_table_cache == 0) {
+ if (!revoke_table_cache) {
kmem_cache_destroy(revoke_record_cache);
revoke_record_cache = NULL;
return -ENOMEM;
if (IS_ERR(t))
return PTR_ERR(t);
- wait_event(journal->j_wait_done_commit, journal->j_task != 0);
+ wait_event(journal->j_wait_done_commit, journal->j_task != NULL);
return 0;
}
while (journal->j_task) {
wake_up(&journal->j_wait_commit);
spin_unlock(&journal->j_state_lock);
- wait_event(journal->j_wait_done_commit, journal->j_task == 0);
+ wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
spin_lock(&journal->j_state_lock);
}
spin_unlock(&journal->j_state_lock);
{
int retval;
- J_ASSERT(jbd2_journal_head_cache == 0);
+ J_ASSERT(jbd2_journal_head_cache == NULL);
jbd2_journal_head_cache = kmem_cache_create("jbd2_journal_head",
sizeof(struct journal_head),
0, /* offset */
SLAB_TEMPORARY, /* flags */
NULL); /* ctor */
retval = 0;
- if (jbd2_journal_head_cache == 0) {
+ if (!jbd2_journal_head_cache) {
retval = -ENOMEM;
printk(KERN_EMERG "JBD: no memory for journal_head cache\n");
}
atomic_inc(&nr_journal_heads);
#endif
ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
- if (ret == 0) {
+ if (!ret) {
jbd_debug(1, "out of memory for journal_head\n");
if (time_after(jiffies, last_warning + 5*HZ)) {
printk(KERN_NOTICE "ENOMEM in %s, retrying.\n",
__FUNCTION__);
last_warning = jiffies;
}
- while (ret == 0) {
+ while (!ret) {
yield();
ret = kmem_cache_alloc(jbd2_journal_head_cache, GFP_NOFS);
}
0,
SLAB_HWCACHE_ALIGN|SLAB_TEMPORARY,
NULL);
- if (jbd2_revoke_record_cache == 0)
+ if (!jbd2_revoke_record_cache)
return -ENOMEM;
jbd2_revoke_table_cache = kmem_cache_create("jbd2_revoke_table",
sizeof(struct jbd2_revoke_table_s),
0, SLAB_TEMPORARY, NULL);
- if (jbd2_revoke_table_cache == 0) {
+ if (!jbd2_revoke_table_cache) {
kmem_cache_destroy(jbd2_revoke_record_cache);
jbd2_revoke_record_cache = NULL;
return -ENOMEM;
* any extra contention...
*/
-static int link_path_walk(const char *name, struct nameidata *nd);
+static int __link_path_walk(const char *name, struct nameidata *nd);
/* In order to reduce some races, while at the same time doing additional
* checking and hopefully speeding things up, we copy filenames to the
return 1;
}
+/*
+ * Wrapper to retry pathname resolution whenever the underlying
+ * file system returns an ESTALE.
+ *
+ * Retry the whole path once, forcing real lookup requests
+ * instead of relying on the dcache.
+ */
+static __always_inline int link_path_walk(const char *name, struct nameidata *nd)
+{
+ struct path save = nd->path;
+ int result;
+
+ /* make sure the stuff we saved doesn't go away */
+ dget(save.dentry);
+ mntget(save.mnt);
+
+ result = __link_path_walk(name, nd);
+ if (result == -ESTALE) {
+ /* nd->path had been dropped */
+ nd->path = save;
+ dget(nd->path.dentry);
+ mntget(nd->path.mnt);
+ nd->flags |= LOOKUP_REVAL;
+ result = __link_path_walk(name, nd);
+ }
+
+ path_put(&save);
+
+ return result;
+}
+
static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
{
int res = 0;
return err;
}
-/*
- * Wrapper to retry pathname resolution whenever the underlying
- * file system returns an ESTALE.
- *
- * Retry the whole path once, forcing real lookup requests
- * instead of relying on the dcache.
- */
-static int link_path_walk(const char *name, struct nameidata *nd)
-{
- struct nameidata save = *nd;
- int result;
-
- /* make sure the stuff we saved doesn't go away */
- dget(save.path.dentry);
- mntget(save.path.mnt);
-
- result = __link_path_walk(name, nd);
- if (result == -ESTALE) {
- *nd = save;
- dget(nd->path.dentry);
- mntget(nd->path.mnt);
- nd->flags |= LOOKUP_REVAL;
- result = __link_path_walk(name, nd);
- }
-
- path_put(&save.path);
-
- return result;
-}
-
static int path_walk(const char *name, struct nameidata *nd)
{
current->total_link_count = 0;
}
}
-static void detach_mnt(struct vfsmount *mnt, struct nameidata *old_nd)
+static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
{
- old_nd->path.dentry = mnt->mnt_mountpoint;
- old_nd->path.mnt = mnt->mnt_parent;
+ old_path->dentry = mnt->mnt_mountpoint;
+ old_path->mnt = mnt->mnt_parent;
mnt->mnt_parent = mnt;
mnt->mnt_mountpoint = mnt->mnt_root;
list_del_init(&mnt->mnt_child);
list_del_init(&mnt->mnt_hash);
- old_nd->path.dentry->d_mounted--;
+ old_path->dentry->d_mounted--;
}
void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
dentry->d_mounted++;
}
-static void attach_mnt(struct vfsmount *mnt, struct nameidata *nd)
+static void attach_mnt(struct vfsmount *mnt, struct path *path)
{
- mnt_set_mountpoint(nd->path.mnt, nd->path.dentry, mnt);
+ mnt_set_mountpoint(path->mnt, path->dentry, mnt);
list_add_tail(&mnt->mnt_hash, mount_hashtable +
- hash(nd->path.mnt, nd->path.dentry));
- list_add_tail(&mnt->mnt_child, &nd->path.mnt->mnt_mounts);
+ hash(path->mnt, path->dentry));
+ list_add_tail(&mnt->mnt_child, &path->mnt->mnt_mounts);
}
/*
/* stick the duplicate mount on the same expiry list
* as the original if that was on one */
if (flag & CL_EXPIRE) {
- spin_lock(&vfsmount_lock);
if (!list_empty(&old->mnt_expire))
list_add(&mnt->mnt_expire, &old->mnt_expire);
- spin_unlock(&vfsmount_lock);
}
}
return mnt;
m = mnt->mnt_parent;
mnt->mnt_mountpoint = mnt->mnt_root;
mnt->mnt_parent = mnt;
+ m->mnt_ghosts--;
spin_unlock(&vfsmount_lock);
dput(dentry);
mntput(m);
__touch_mnt_namespace(p->mnt_ns);
p->mnt_ns = NULL;
list_del_init(&p->mnt_child);
- if (p->mnt_parent != p)
+ if (p->mnt_parent != p) {
+ p->mnt_parent->mnt_ghosts++;
p->mnt_mountpoint->d_mounted--;
+ }
change_mnt_propagation(p, MS_PRIVATE);
}
}
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts);
+
static int do_umount(struct vfsmount *mnt, int flags)
{
struct super_block *sb = mnt->mnt_sb;
spin_lock(&vfsmount_lock);
event++;
+ if (!(flags & MNT_DETACH))
+ shrink_submounts(mnt, &umount_list);
+
retval = -EBUSY;
if (flags & MNT_DETACH || !propagate_mount_busy(mnt, 2)) {
if (!list_empty(&mnt->mnt_list))
int flag)
{
struct vfsmount *res, *p, *q, *r, *s;
- struct nameidata nd;
+ struct path path;
if (!(flag & CL_COPY_ALL) && IS_MNT_UNBINDABLE(mnt))
return NULL;
q = q->mnt_parent;
}
p = s;
- nd.path.mnt = q;
- nd.path.dentry = p->mnt_mountpoint;
+ path.mnt = q;
+ path.dentry = p->mnt_mountpoint;
q = clone_mnt(p, p->mnt_root, flag);
if (!q)
goto Enomem;
spin_lock(&vfsmount_lock);
list_add_tail(&q->mnt_list, &res->mnt_list);
- attach_mnt(q, &nd);
+ attach_mnt(q, &path);
spin_unlock(&vfsmount_lock);
}
}
* in allocations.
*/
static int attach_recursive_mnt(struct vfsmount *source_mnt,
- struct nameidata *nd, struct nameidata *parent_nd)
+ struct path *path, struct path *parent_path)
{
LIST_HEAD(tree_list);
- struct vfsmount *dest_mnt = nd->path.mnt;
- struct dentry *dest_dentry = nd->path.dentry;
+ struct vfsmount *dest_mnt = path->mnt;
+ struct dentry *dest_dentry = path->dentry;
struct vfsmount *child, *p;
if (propagate_mnt(dest_mnt, dest_dentry, source_mnt, &tree_list))
}
spin_lock(&vfsmount_lock);
- if (parent_nd) {
- detach_mnt(source_mnt, parent_nd);
- attach_mnt(source_mnt, nd);
+ if (parent_path) {
+ detach_mnt(source_mnt, parent_path);
+ attach_mnt(source_mnt, path);
touch_mnt_namespace(current->nsproxy->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
err = -ENOENT;
if (IS_ROOT(nd->path.dentry) || !d_unhashed(nd->path.dentry))
- err = attach_recursive_mnt(mnt, nd, NULL);
+ err = attach_recursive_mnt(mnt, &nd->path, NULL);
out_unlock:
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
if (!err)
*/
static noinline int do_move_mount(struct nameidata *nd, char *old_name)
{
- struct nameidata old_nd, parent_nd;
+ struct nameidata old_nd;
+ struct path parent_path;
struct vfsmount *p;
int err = 0;
if (!capable(CAP_SYS_ADMIN))
if (p == old_nd.path.mnt)
goto out1;
- err = attach_recursive_mnt(old_nd.path.mnt, nd, &parent_nd);
+ err = attach_recursive_mnt(old_nd.path.mnt, &nd->path, &parent_path);
if (err)
goto out1;
- spin_lock(&vfsmount_lock);
/* if the mount is moved, it should no longer be expire
* automatically */
list_del_init(&old_nd.path.mnt->mnt_expire);
- spin_unlock(&vfsmount_lock);
out1:
mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
out:
up_write(&namespace_sem);
if (!err)
- path_put(&parent_nd.path);
+ path_put(&parent_path);
path_put(&old_nd.path);
return err;
}
if ((err = graft_tree(newmnt, nd)))
goto unlock;
- if (fslist) {
- /* add to the specified expiration list */
- spin_lock(&vfsmount_lock);
+ if (fslist) /* add to the specified expiration list */
list_add_tail(&newmnt->mnt_expire, fslist);
- spin_unlock(&vfsmount_lock);
- }
+
up_write(&namespace_sem);
return 0;
EXPORT_SYMBOL_GPL(do_add_mount);
-static void expire_mount(struct vfsmount *mnt, struct list_head *mounts,
- struct list_head *umounts)
-{
- spin_lock(&vfsmount_lock);
-
- /*
- * Check if mount is still attached, if not, let whoever holds it deal
- * with the sucker
- */
- if (mnt->mnt_parent == mnt) {
- spin_unlock(&vfsmount_lock);
- return;
- }
-
- /*
- * Check that it is still dead: the count should now be 2 - as
- * contributed by the vfsmount parent and the mntget above
- */
- if (!propagate_mount_busy(mnt, 2)) {
- /* delete from the namespace */
- touch_mnt_namespace(mnt->mnt_ns);
- list_del_init(&mnt->mnt_list);
- mnt->mnt_ns = NULL;
- umount_tree(mnt, 1, umounts);
- spin_unlock(&vfsmount_lock);
- } else {
- /*
- * Someone brought it back to life whilst we didn't have any
- * locks held so return it to the expiration list
- */
- list_add_tail(&mnt->mnt_expire, mounts);
- spin_unlock(&vfsmount_lock);
- }
-}
-
-/*
- * go through the vfsmounts we've just consigned to the graveyard to
- * - check that they're still dead
- * - delete the vfsmount from the appropriate namespace under lock
- * - dispose of the corpse
- */
-static void expire_mount_list(struct list_head *graveyard, struct list_head *mounts)
-{
- struct mnt_namespace *ns;
- struct vfsmount *mnt;
-
- while (!list_empty(graveyard)) {
- LIST_HEAD(umounts);
- mnt = list_first_entry(graveyard, struct vfsmount, mnt_expire);
- list_del_init(&mnt->mnt_expire);
-
- /* don't do anything if the namespace is dead - all the
- * vfsmounts from it are going away anyway */
- ns = mnt->mnt_ns;
- if (!ns || !ns->root)
- continue;
- get_mnt_ns(ns);
-
- spin_unlock(&vfsmount_lock);
- down_write(&namespace_sem);
- expire_mount(mnt, mounts, &umounts);
- up_write(&namespace_sem);
- release_mounts(&umounts);
- mntput(mnt);
- put_mnt_ns(ns);
- spin_lock(&vfsmount_lock);
- }
-}
-
/*
* process a list of expirable mountpoints with the intent of discarding any
* mountpoints that aren't in use and haven't been touched since last we came
{
struct vfsmount *mnt, *next;
LIST_HEAD(graveyard);
+ LIST_HEAD(umounts);
if (list_empty(mounts))
return;
+ down_write(&namespace_sem);
spin_lock(&vfsmount_lock);
/* extract from the expiration list every vfsmount that matches the
*/
list_for_each_entry_safe(mnt, next, mounts, mnt_expire) {
if (!xchg(&mnt->mnt_expiry_mark, 1) ||
- atomic_read(&mnt->mnt_count) != 1)
+ propagate_mount_busy(mnt, 1))
continue;
-
- mntget(mnt);
list_move(&mnt->mnt_expire, &graveyard);
}
-
- expire_mount_list(&graveyard, mounts);
-
+ while (!list_empty(&graveyard)) {
+ mnt = list_first_entry(&graveyard, struct vfsmount, mnt_expire);
+ touch_mnt_namespace(mnt->mnt_ns);
+ umount_tree(mnt, 1, &umounts);
+ }
spin_unlock(&vfsmount_lock);
+ up_write(&namespace_sem);
+
+ release_mounts(&umounts);
}
EXPORT_SYMBOL_GPL(mark_mounts_for_expiry);
}
if (!propagate_mount_busy(mnt, 1)) {
- mntget(mnt);
list_move_tail(&mnt->mnt_expire, graveyard);
found++;
}
* process a list of expirable mountpoints with the intent of discarding any
* submounts of a specific parent mountpoint
*/
-void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts)
+static void shrink_submounts(struct vfsmount *mnt, struct list_head *umounts)
{
LIST_HEAD(graveyard);
- int found;
-
- spin_lock(&vfsmount_lock);
+ struct vfsmount *m;
/* extract submounts of 'mountpoint' from the expiration list */
- while ((found = select_submounts(mountpoint, &graveyard)) != 0)
- expire_mount_list(&graveyard, mounts);
-
- spin_unlock(&vfsmount_lock);
+ while (select_submounts(mnt, &graveyard)) {
+ while (!list_empty(&graveyard)) {
+ m = list_first_entry(&graveyard, struct vfsmount,
+ mnt_expire);
+ touch_mnt_namespace(mnt->mnt_ns);
+ umount_tree(mnt, 1, umounts);
+ }
+ }
}
-EXPORT_SYMBOL_GPL(shrink_submounts);
-
/*
* Some copy_from_user() implementations do not return the exact number of
* bytes remaining to copy on a fault. But copy_mount_options() requires that.
path_put(&old_pwd);
}
-static void chroot_fs_refs(struct nameidata *old_nd, struct nameidata *new_nd)
+static void chroot_fs_refs(struct path *old_root, struct path *new_root)
{
struct task_struct *g, *p;
struct fs_struct *fs;
if (fs) {
atomic_inc(&fs->count);
task_unlock(p);
- if (fs->root.dentry == old_nd->path.dentry
- && fs->root.mnt == old_nd->path.mnt)
- set_fs_root(fs, &new_nd->path);
- if (fs->pwd.dentry == old_nd->path.dentry
- && fs->pwd.mnt == old_nd->path.mnt)
- set_fs_pwd(fs, &new_nd->path);
+ if (fs->root.dentry == old_root->dentry
+ && fs->root.mnt == old_root->mnt)
+ set_fs_root(fs, new_root);
+ if (fs->pwd.dentry == old_root->dentry
+ && fs->pwd.mnt == old_root->mnt)
+ set_fs_pwd(fs, new_root);
put_fs_struct(fs);
} else
task_unlock(p);
const char __user * put_old)
{
struct vfsmount *tmp;
- struct nameidata new_nd, old_nd, parent_nd, root_parent, user_nd;
+ struct nameidata new_nd, old_nd, user_nd;
+ struct path parent_path, root_parent;
int error;
if (!capable(CAP_SYS_ADMIN))
goto out3;
} else if (!is_subdir(old_nd.path.dentry, new_nd.path.dentry))
goto out3;
- detach_mnt(new_nd.path.mnt, &parent_nd);
+ detach_mnt(new_nd.path.mnt, &parent_path);
detach_mnt(user_nd.path.mnt, &root_parent);
/* mount old root on put_old */
- attach_mnt(user_nd.path.mnt, &old_nd);
+ attach_mnt(user_nd.path.mnt, &old_nd.path);
/* mount new_root on / */
attach_mnt(new_nd.path.mnt, &root_parent);
touch_mnt_namespace(current->nsproxy->mnt_ns);
spin_unlock(&vfsmount_lock);
- chroot_fs_refs(&user_nd, &new_nd);
+ chroot_fs_refs(&user_nd.path, &new_nd.path);
security_sb_post_pivotroot(&user_nd, &new_nd);
error = 0;
- path_put(&root_parent.path);
- path_put(&parent_nd.path);
+ path_put(&root_parent);
+ path_put(&parent_path);
out2:
mutex_unlock(&old_nd.path.dentry->d_inode->i_mutex);
up_write(&namespace_sem);
.write = do_sync_write,
.aio_read = nfs_file_read,
.aio_write = nfs_file_write,
+#ifdef CONFIG_MMU
.mmap = nfs_file_mmap,
+#else
+ .mmap = generic_file_mmap,
+#endif
.open = nfs_file_open,
.flush = nfs_file_flush,
.release = nfs_file_release,
ctx->cred = get_rpccred(cred);
ctx->state = NULL;
ctx->lockowner = current->files;
+ ctx->flags = 0;
ctx->error = 0;
ctx->dir_cookie = 0;
atomic_set(&ctx->count, 1);
struct nfs_server *server = NFS_SB(vfsmnt->mnt_sb);
struct rpc_clnt *rpc;
- shrink_submounts(vfsmnt, &nfs_automount_list);
-
if (!(flags & MNT_FORCE))
return;
/* -EIO all pending I/O */
{
long ret = do_sys_ftruncate(fd, length, 1);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, fd, length);
return ret;
}
{
long ret = do_sys_ftruncate(fd, length, 0);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, fd, length);
return ret;
}
#endif
int error;
struct file *f;
+ /*
+ * We must always pass in a valid mount pointer. Historically
+ * callers got away with not passing it, but we must enforce this at
+ * the earliest possible point now to avoid strange problems deep in the
+ * filesystem stack.
+ */
+ if (!mnt) {
+ printk(KERN_WARNING "%s called with NULL vfsmount\n", __func__);
+ dump_stack();
+ return ERR_PTR(-EINVAL);
+ }
+
error = -ENFILE;
f = get_empty_filp();
if (f == NULL) {
ret = do_sys_open(AT_FDCWD, filename, flags, mode);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, flags, mode);
return ret;
}
ret = do_sys_open(dfd, filename, flags, mode);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(4, ret, dfd, filename, flags, mode);
return ret;
}
struct dentry *dentry;
struct qstr name = { .name = "" };
- f = get_empty_filp();
- if (!f)
- return ERR_PTR(-ENFILE);
err = -ENFILE;
inode = get_pipe_inode();
if (!inode)
- goto err_file;
+ goto err;
err = -ENOMEM;
dentry = d_alloc(pipe_mnt->mnt_sb->s_root, &name);
*/
dentry->d_flags &= ~DCACHE_UNHASHED;
d_instantiate(dentry, inode);
- f->f_path.mnt = mntget(pipe_mnt);
- f->f_path.dentry = dentry;
+
+ err = -ENFILE;
+ f = alloc_file(pipe_mnt, dentry, FMODE_WRITE, &write_pipe_fops);
+ if (!f)
+ goto err_dentry;
f->f_mapping = inode->i_mapping;
f->f_flags = O_WRONLY;
- f->f_op = &write_pipe_fops;
- f->f_mode = FMODE_WRITE;
f->f_version = 0;
return f;
+ err_dentry:
+ dput(dentry);
err_inode:
free_pipe_info(inode);
iput(inode);
- err_file:
- put_filp(f);
+ err:
return ERR_PTR(err);
}
*/
static inline int do_refcount_check(struct vfsmount *mnt, int count)
{
- int mycount = atomic_read(&mnt->mnt_count);
+ int mycount = atomic_read(&mnt->mnt_count) - mnt->mnt_ghosts;
return (mycount > count);
}
return balance_leaf_when_delete(tb, flag);
zeros_num = 0;
- if (flag == M_INSERT && body == 0)
+ if (flag == M_INSERT && !body)
zeros_num = ih_item_len(ih);
pos_in_item = tb->tb_path->pos_in_item;
struct buffer_info bi;
for (i = 0; i < MAX_FEB_SIZE; i++)
- if (tb->FEB[i] != 0)
+ if (tb->FEB[i] != NULL)
break;
if (i == MAX_FEB_SIZE)
{
int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
- RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FL[h] == 0,
+ RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FL[h] == NULL,
"vs-12325: FL[%d](%p) or F[%d](%p) does not exist",
h, tb->FL[h], h, PATH_H_PPARENT(tb->tb_path, h));
{
int Sh_position = PATH_H_POSITION(tb->tb_path, h + 1);
- RFALSE(PATH_H_PPARENT(tb->tb_path, h) == 0 || tb->FR[h] == 0,
+ RFALSE(PATH_H_PPARENT(tb->tb_path, h) == NULL || tb->FR[h] == NULL,
"vs-12330: F[%d](%p) or FR[%d](%p) does not exist",
h, PATH_H_PPARENT(tb->tb_path, h), h, tb->FR[h]);
if (vn->vn_mode == M_INSERT) {
struct virtual_item *vi = vn->vn_vi + vn->vn_affected_item_num;
- RFALSE(vn->vn_ins_ih == 0,
+ RFALSE(vn->vn_ins_ih == NULL,
"vs-8040: item header of inserted item is not specified");
vi->vi_item_len = tb->insert_size[0];
vi->vi_ih = vn->vn_ins_ih;
struct buffer_head *l, *f;
int order;
- if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (l = tb->FL[h]) == 0)
+ if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+ (l = tb->FL[h]) == NULL)
return 0;
if (f == l)
struct buffer_head *r, *f;
int order;
- if ((f = PATH_H_PPARENT(tb->tb_path, h)) == 0 || (r = tb->FR[h]) == 0)
+ if ((f = PATH_H_PPARENT(tb->tb_path, h)) == NULL ||
+ (r = tb->FR[h]) == NULL)
return 0;
if (f == r)
"vs-10250: leaf_define_dest_src_infos: shift type is unknown (%d)",
shift_mode);
}
- RFALSE(src_bi->bi_bh == 0 || dest_bi->bi_bh == 0,
+ RFALSE(!src_bi->bi_bh || !dest_bi->bi_bh,
"vs-10260: mode==%d, source (%p) or dest (%p) buffer is initialized incorrectly",
shift_mode, src_bi->bi_bh, dest_bi->bi_bh);
}
buflen = DEH_SIZE + ROUND_UP(namelen);
if (buflen > sizeof(small_buf)) {
buffer = kmalloc(buflen, GFP_NOFS);
- if (buffer == 0)
+ if (!buffer)
return -ENOMEM;
} else
buffer = small_buf;
dput(xadir);
if (err)
xafile = ERR_PTR(err);
- return xafile;
-}
-
-/* Opens a file pointer to the attribute associated with inode */
-static struct file *open_xa_file(const struct inode *inode, const char *name,
- int flags)
-{
- struct dentry *xafile;
- struct file *fp;
-
- xafile = get_xa_file_dentry(inode, name, flags);
- if (IS_ERR(xafile))
- return ERR_PTR(PTR_ERR(xafile));
else if (!xafile->d_inode) {
dput(xafile);
- return ERR_PTR(-ENODATA);
+ xafile = ERR_PTR(-ENODATA);
}
-
- fp = dentry_open(xafile, NULL, O_RDWR);
- /* dentry_open dputs the dentry if it fails */
-
- return fp;
+ return xafile;
}
/*
* we're called with i_mutex held, so there are no worries about the directory
* changing underneath us.
*/
-static int __xattr_readdir(struct file *filp, void *dirent, filldir_t filldir)
+static int __xattr_readdir(struct inode *inode, void *dirent, filldir_t filldir)
{
- struct inode *inode = filp->f_path.dentry->d_inode;
struct cpu_key pos_key; /* key of current position in the directory (key of directory entry) */
INITIALIZE_PATH(path_to_entry);
struct buffer_head *bh;
*
*/
static
-int xattr_readdir(struct file *file, filldir_t filler, void *buf)
+int xattr_readdir(struct inode *inode, filldir_t filler, void *buf)
{
- struct inode *inode = file->f_path.dentry->d_inode;
- int res = -ENOTDIR;
- if (!file->f_op || !file->f_op->readdir)
- goto out;
+ int res = -ENOENT;
mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
-// down(&inode->i_zombie);
- res = -ENOENT;
if (!IS_DEADDIR(inode)) {
lock_kernel();
- res = __xattr_readdir(file, buf, filler);
+ res = __xattr_readdir(inode, buf, filler);
unlock_kernel();
}
-// up(&inode->i_zombie);
mutex_unlock(&inode->i_mutex);
- out:
return res;
}
size_t buffer_size, int flags)
{
int err = 0;
- struct file *fp;
+ struct dentry *dentry;
struct page *page;
char *data;
struct address_space *mapping;
xahash = xattr_hash(buffer, buffer_size);
open_file:
- fp = open_xa_file(inode, name, flags);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
+ dentry = get_xa_file_dentry(inode, name, flags);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
goto out;
}
- xinode = fp->f_path.dentry->d_inode;
+ xinode = dentry->d_inode;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
/* we need to copy it off.. */
if (xinode->i_nlink > 1) {
- fput(fp);
+ dput(dentry);
err = reiserfs_xattr_del(inode, name);
if (err < 0)
goto out;
newattrs.ia_size = buffer_size;
newattrs.ia_valid = ATTR_SIZE | ATTR_CTIME;
mutex_lock_nested(&xinode->i_mutex, I_MUTEX_XATTR);
- err = notify_change(fp->f_path.dentry, &newattrs);
+ err = notify_change(dentry, &newattrs);
if (err)
goto out_filp;
rxh->h_hash = cpu_to_le32(xahash);
}
- err = reiserfs_prepare_write(fp, page, page_offset,
+ err = reiserfs_prepare_write(NULL, page, page_offset,
page_offset + chunk + skip);
if (!err) {
if (buffer)
memcpy(data + skip, buffer + buffer_pos, chunk);
- err =
- reiserfs_commit_write(fp, page, page_offset,
- page_offset + chunk +
- skip);
+ err = reiserfs_commit_write(NULL, page, page_offset,
+ page_offset + chunk +
+ skip);
}
unlock_page(page);
reiserfs_put_page(page);
out_filp:
mutex_unlock(&xinode->i_mutex);
- fput(fp);
+ dput(dentry);
out:
return err;
size_t buffer_size)
{
ssize_t err = 0;
- struct file *fp;
+ struct dentry *dentry;
size_t isize;
size_t file_pos = 0;
size_t buffer_pos = 0;
if (get_inode_sd_version(inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
- fp = open_xa_file(inode, name, FL_READONLY);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
+ dentry = get_xa_file_dentry(inode, name, FL_READONLY);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
goto out;
}
- xinode = fp->f_path.dentry->d_inode;
+ xinode = dentry->d_inode;
isize = xinode->i_size;
REISERFS_I(inode)->i_flags |= i_has_xattr_dir;
}
out_dput:
- fput(fp);
+ dput(dentry);
out:
return err;
/* This is called w/ inode->i_mutex downed */
int reiserfs_delete_xattrs(struct inode *inode)
{
- struct file *fp;
struct dentry *dir, *root;
int err = 0;
return 0;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
lock_kernel();
- err = xattr_readdir(fp, reiserfs_delete_xattrs_filler, dir);
+ err = xattr_readdir(dir->d_inode, reiserfs_delete_xattrs_filler, dir);
if (err) {
unlock_kernel();
goto out_dir;
unlock_kernel();
out_dir:
- fput(fp);
+ dput(dir);
out:
if (!err)
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs)
{
- struct file *fp;
struct dentry *dir;
int err = 0;
struct reiserfs_chown_buf buf;
goto out;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
lock_kernel();
attrs->ia_valid &= (ATTR_UID | ATTR_GID | ATTR_CTIME);
buf.attrs = attrs;
buf.inode = inode;
- err = xattr_readdir(fp, reiserfs_chown_xattrs_filler, &buf);
+ err = xattr_readdir(dir->d_inode, reiserfs_chown_xattrs_filler, &buf);
if (err) {
unlock_kernel();
goto out_dir;
unlock_kernel();
out_dir:
- fput(fp);
+ dput(dir);
out:
attrs->ia_valid = ia_valid;
*/
ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
{
- struct file *fp;
struct dentry *dir;
int err = 0;
struct reiserfs_listxattr_buf buf;
goto out;
}
- fp = dentry_open(dir, NULL, O_RDWR);
- if (IS_ERR(fp)) {
- err = PTR_ERR(fp);
- /* dentry_open dputs the dentry if it fails */
- goto out;
- }
-
buf.r_buf = buffer;
buf.r_size = buffer ? size : 0;
buf.r_pos = 0;
REISERFS_I(dentry->d_inode)->i_flags |= i_has_xattr_dir;
- err = xattr_readdir(fp, reiserfs_listxattr_filler, &buf);
+ err = xattr_readdir(dir->d_inode, reiserfs_listxattr_filler, &buf);
if (err)
goto out_dir;
err = buf.r_pos;
out_dir:
- fput(fp);
+ dput(dir);
out:
reiserfs_read_unlock_xattr_i(dentry->d_inode);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
break;
- default: /* this is just in case for now ... */
+ default:
+ /*
+ * This case catches also the signals queued by sigqueue().
+ */
err |= __put_user(kinfo->si_pid, &uinfo->ssi_pid);
err |= __put_user(kinfo->si_uid, &uinfo->ssi_uid);
+ err |= __put_user((long) kinfo->si_ptr, &uinfo->ssi_ptr);
+ err |= __put_user(kinfo->si_int, &uinfo->ssi_int);
break;
}
smb_close_socket(server);
- if (pid == 0) {
+ if (!pid) {
/* FIXME: this is fatal, umount? */
printk(KERN_ERR "smb_retry: no connection process\n");
server->state = CONN_RETRIED;
break;
error = add_to_page_cache_lru(page, mapping, index,
- GFP_KERNEL);
+ mapping_gfp_mask(mapping));
if (unlikely(error)) {
page_cache_release(page);
if (error == -EEXIST)
* for an in-flight io page
*/
if (flags & SPLICE_F_NONBLOCK) {
- if (TestSetPageLocked(page))
+ if (TestSetPageLocked(page)) {
+ error = -EAGAIN;
break;
+ }
} else
lock_page(page);
struct pipe_inode_info *pipe, size_t len,
unsigned int flags)
{
- ssize_t spliced;
- int ret;
loff_t isize, left;
+ int ret;
isize = i_size_read(in->f_mapping->host);
if (unlikely(*ppos >= isize))
if (unlikely(left < len))
len = left;
- ret = 0;
- spliced = 0;
- while (len && !spliced) {
- ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
-
- if (ret < 0)
- break;
- else if (!ret) {
- if (spliced)
- break;
- if (flags & SPLICE_F_NONBLOCK) {
- ret = -EAGAIN;
- break;
- }
- }
-
+ ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
+ if (ret > 0)
*ppos += ret;
- len -= ret;
- spliced += ret;
- }
-
- if (spliced)
- return spliced;
return ret;
}
put_filesystem(type);
return mnt;
}
+EXPORT_SYMBOL_GPL(do_kern_mount);
struct vfsmount *kern_mount_data(struct file_system_type *type, void *data)
{
#include <linux/module.h>
#include <linux/kobject.h>
+#include <linux/kallsyms.h>
#include <linux/namei.h>
#include <linux/poll.h>
#include <linux/list.h>
* The code works fine with PAGE_SIZE return but it's likely to
* indicate truncated result or overflow in normal use cases.
*/
- BUG_ON(count >= (ssize_t)PAGE_SIZE);
+ if (count >= (ssize_t)PAGE_SIZE) {
+ print_symbol("fill_read_buffer: %s returned bad count\n",
+ (unsigned long)ops->show);
+ /* Try to struggle along */
+ count = PAGE_SIZE - 1;
+ }
if (count >= 0) {
buffer->needs_read_fill = 0;
buffer->count = count;
* Only allow the sys admin to reserve space unless
* unwritten extents are enabled.
*/
- if (!XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) &&
+ if (!xfs_sb_version_hasextflgbit(&mp->m_sb) &&
!capable(CAP_SYS_ADMIN))
return -EPERM;
#if defined(DEBUG) && defined(XFS_LOUD_RECOVERY)
unsigned oldv = mp->m_sb.sb_versionnum;
#endif
- ASSERT(!XFS_SB_VERSION_HASQUOTA(&mp->m_sb));
+ ASSERT(!xfs_sb_version_hasquota(&mp->m_sb));
ASSERT((sbfields & (XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
XFS_SB_GQUOTINO | XFS_SB_QFLAGS)) ==
(XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO |
XFS_SB_GQUOTINO | XFS_SB_QFLAGS));
- XFS_SB_VERSION_ADDQUOTA(&mp->m_sb);
+ xfs_sb_version_addquota(&mp->m_sb);
mp->m_sb.sb_uquotino = NULLFSINO;
mp->m_sb.sb_gquotino = NULLFSINO;
/*
* Get the uquota and gquota inodes
*/
- if (XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+ if (xfs_sb_version_hasquota(&mp->m_sb)) {
if (XFS_IS_UQUOTA_ON(mp) &&
mp->m_sb.sb_uquotino != NULLFSINO) {
ASSERT(mp->m_sb.sb_uquotino > 0);
*quotaflags = 0;
*needquotamount = B_FALSE;
- quotaondisk = XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+ quotaondisk = xfs_sb_version_hasquota(&mp->m_sb) &&
(mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT);
if (quotaondisk) {
if (!capable(CAP_SYS_ADMIN))
return XFS_ERROR(EPERM);
error = 0;
- if (!XFS_SB_VERSION_HASQUOTA(&mp->m_sb) || flags == 0) {
+ if (!xfs_sb_version_hasquota(&mp->m_sb) || flags == 0) {
qdprintk("qtrunc flags=%x m_qflags=%x\n", flags, mp->m_qflags);
return XFS_ERROR(EINVAL);
}
memset(out, 0, sizeof(fs_quota_stat_t));
out->qs_version = FS_QSTAT_VERSION;
- if (! XFS_SB_VERSION_HASQUOTA(&mp->m_sb)) {
+ if (!xfs_sb_version_hasquota(&mp->m_sb)) {
out->qs_uquota.qfs_ino = NULLFSINO;
out->qs_gquota.qfs_ino = NULLFSINO;
return (0);
xfs_sbversion_add_attr2(xfs_mount_t *mp, xfs_trans_t *tp)
{
if ((mp->m_flags & XFS_MOUNT_ATTR2) &&
- !(XFS_SB_VERSION_HASATTR2(&mp->m_sb))) {
+ !(xfs_sb_version_hasattr2(&mp->m_sb))) {
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
- XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+ if (!xfs_sb_version_hasattr2(&mp->m_sb)) {
+ xfs_sb_version_addattr2(&mp->m_sb);
spin_unlock(&mp->m_sb_lock);
xfs_mod_sb(tp, XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
} else
xfs_trans_log_inode(tp, ip, logflags);
if (error)
goto error2;
- if (!XFS_SB_VERSION_HASATTR(&mp->m_sb) ||
- (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2)) {
+ if (!xfs_sb_version_hasattr(&mp->m_sb) ||
+ (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2)) {
__int64_t sbfields = 0;
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASATTR(&mp->m_sb)) {
- XFS_SB_VERSION_ADDATTR(&mp->m_sb);
+ if (!xfs_sb_version_hasattr(&mp->m_sb)) {
+ xfs_sb_version_addattr(&mp->m_sb);
sbfields |= XFS_SB_VERSIONNUM;
}
- if (!XFS_SB_VERSION_HASATTR2(&mp->m_sb) && version == 2) {
- XFS_SB_VERSION_ADDATTR2(&mp->m_sb);
+ if (!xfs_sb_version_hasattr2(&mp->m_sb) && version == 2) {
+ xfs_sb_version_addattr2(&mp->m_sb);
sbfields |= (XFS_SB_VERSIONNUM | XFS_SB_FEATURES2);
}
if (sbfields) {
* A wasdelay extent has been initialized, so
* shouldn't be flagged as unwritten.
*/
- if (wr && XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ if (wr && xfs_sb_version_hasextflgbit(&mp->m_sb)) {
if (!wasdelay && (flags & XFS_BMAPI_PREALLOC))
got.br_state = XFS_EXT_UNWRITTEN;
}
* get rid of part of a realtime extent.
*/
if (del.br_state == XFS_EXT_UNWRITTEN ||
- !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
/*
* This piece is unwritten, or we're not
* using unwritten extents. Skip over it.
} else if ((del.br_startoff == start &&
(del.br_state == XFS_EXT_UNWRITTEN ||
xfs_trans_get_block_res(tp) == 0)) ||
- !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
/*
* Can't make it unwritten. There isn't
* a full extent here so just skip it.
* Extent state and extent format macros.
*/
#define XFS_EXTFMT_INODE(x) \
- (XFS_SB_VERSION_HASEXTFLGBIT(&((x)->i_mount->m_sb)) ? \
+ (xfs_sb_version_hasextflgbit(&((x)->i_mount->m_sb)) ? \
XFS_EXTFMT_HASSTATE : XFS_EXTFMT_NOSTATE)
#define ISUNWRITTEN(x) ((x)->br_state == XFS_EXT_UNWRITTEN)
xfs_dir_mount(
xfs_mount_t *mp)
{
- ASSERT(XFS_SB_VERSION_HASDIRV2(&mp->m_sb));
+ ASSERT(xfs_sb_version_hasdirv2(&mp->m_sb));
ASSERT((1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog)) <=
XFS_MAX_BLOCKSIZE);
mp->m_dirblksize = 1 << (mp->m_sb.sb_blocklog + mp->m_sb.sb_dirblklog);
if (new_version >= 3) {
geo->version = XFS_FSOP_GEOM_VERSION;
geo->flags =
- (XFS_SB_VERSION_HASATTR(&mp->m_sb) ?
+ (xfs_sb_version_hasattr(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_ATTR : 0) |
- (XFS_SB_VERSION_HASNLINK(&mp->m_sb) ?
+ (xfs_sb_version_hasnlink(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_NLINK : 0) |
- (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) ?
+ (xfs_sb_version_hasquota(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_QUOTA : 0) |
- (XFS_SB_VERSION_HASALIGN(&mp->m_sb) ?
+ (xfs_sb_version_hasalign(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_IALIGN : 0) |
- (XFS_SB_VERSION_HASDALIGN(&mp->m_sb) ?
+ (xfs_sb_version_hasdalign(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_DALIGN : 0) |
- (XFS_SB_VERSION_HASSHARED(&mp->m_sb) ?
+ (xfs_sb_version_hasshared(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_SHARED : 0) |
- (XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb) ?
+ (xfs_sb_version_hasextflgbit(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_EXTFLG : 0) |
- (XFS_SB_VERSION_HASDIRV2(&mp->m_sb) ?
+ (xfs_sb_version_hasdirv2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_DIRV2 : 0) |
- (XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+ (xfs_sb_version_hassector(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_SECTOR : 0) |
(xfs_sb_version_haslazysbcount(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_LAZYSB : 0) |
- (XFS_SB_VERSION_HASATTR2(&mp->m_sb) ?
+ (xfs_sb_version_hasattr2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_ATTR2 : 0);
- geo->logsectsize = XFS_SB_VERSION_HASSECTOR(&mp->m_sb) ?
+ geo->logsectsize = xfs_sb_version_hassector(&mp->m_sb) ?
mp->m_sb.sb_logsectsize : BBSIZE;
geo->rtsectsize = mp->m_sb.sb_blocksize;
geo->dirblocksize = mp->m_dirblksize;
}
if (new_version >= 4) {
geo->flags |=
- (XFS_SB_VERSION_HASLOGV2(&mp->m_sb) ?
+ (xfs_sb_version_haslogv2(&mp->m_sb) ?
XFS_FSOP_GEOM_FLAGS_LOGV2 : 0);
geo->logsunit = mp->m_sb.sb_logsunit;
}
ASSERT(!(args.mp->m_flags & XFS_MOUNT_NOALIGN));
args.alignment = args.mp->m_dalign;
isaligned = 1;
- } else if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
+ } else if (xfs_sb_version_hasalign(&args.mp->m_sb) &&
args.mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(args.mp,
XFS_INODE_CLUSTER_SIZE(args.mp)))
args.agbno = be32_to_cpu(agi->agi_root);
args.fsbno = XFS_AGB_TO_FSB(args.mp,
be32_to_cpu(agi->agi_seqno), args.agbno);
- if (XFS_SB_VERSION_HASALIGN(&args.mp->m_sb) &&
+ if (xfs_sb_version_hasalign(&args.mp->m_sb) &&
args.mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(args.mp, XFS_INODE_CLUSTER_SIZE(args.mp)))
args.alignment = args.mp->m_sb.sb_inoalignmt;
* use the old version so that old kernels will continue to be
* able to use the file system.
*/
- if (XFS_SB_VERSION_HASNLINK(&args.mp->m_sb))
+ if (xfs_sb_version_hasnlink(&args.mp->m_sb))
version = XFS_DINODE_VERSION_2;
else
version = XFS_DINODE_VERSION_1;
* the inode version number now. This way we only do the conversion
* here rather than here and in the flush/logging code.
*/
- if (XFS_SB_VERSION_HASNLINK(&tp->t_mountp->m_sb) &&
+ if (xfs_sb_version_hasnlink(&tp->t_mountp->m_sb) &&
ip->i_d.di_version == XFS_DINODE_VERSION_1) {
ip->i_d.di_version = XFS_DINODE_VERSION_2;
/*
* has been updated, then make the conversion permanent.
*/
ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
- XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+ xfs_sb_version_hasnlink(&mp->m_sb));
if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
/*
* Convert it back.
*/
*/
mp = ip->i_mount;
ASSERT(ip->i_d.di_version == XFS_DINODE_VERSION_1 ||
- XFS_SB_VERSION_HASNLINK(&mp->m_sb));
+ xfs_sb_version_hasnlink(&mp->m_sb));
if (ip->i_d.di_version == XFS_DINODE_VERSION_1) {
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
/*
* Convert it back.
*/
xfs_ino_t ino)
{
return (ino == mp->m_sb.sb_rbmino || ino == mp->m_sb.sb_rsumino ||
- (XFS_SB_VERSION_HASQUOTA(&mp->m_sb) &&
+ (xfs_sb_version_hasquota(&mp->m_sb) &&
(ino == mp->m_sb.sb_uquotino || ino == mp->m_sb.sb_gquotino)));
}
size >>= 1;
}
- if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&mp->m_sb)) {
/* # headers = size / 32K
* one header holds cycles from 32K of data
*/
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
- if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb)) {
+ if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
/* for larger sector sizes, must have v2 or external log */
ASSERT(log->l_sectbb_log == 0 ||
log->l_logBBstart == 0 ||
- XFS_SB_VERSION_HASLOGV2(&mp->m_sb));
+ xfs_sb_version_haslogv2(&mp->m_sb));
ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
memset(head, 0, sizeof(xlog_rec_header_t));
head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
head->h_version = cpu_to_be32(
- XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+ xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
head->h_size = cpu_to_be32(log->l_iclog_size);
/* new fields */
head->h_fmt = cpu_to_be32(XLOG_FMT);
int roundoff; /* roundoff to BB or stripe */
int split = 0; /* split write into two regions */
int error;
- int v2 = XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb);
+ int v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
XFS_STATS_INC(xs_log_writes);
ASSERT(iclog->ic_refcnt == 0);
log->l_curr_block += BTOBB(eventual_size)+BTOBB(log->l_iclog_hsize);
/* Round up to next log-sunit */
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
log->l_mp->m_sb.sb_logsunit > 1) {
__uint32_t sunit_bb = BTOBB(log->l_mp->m_sb.sb_logsunit);
log->l_curr_block = roundup(log->l_curr_block, sunit_bb);
unit_bytes += sizeof(xlog_op_header_t) * num_headers;
/* for roundoff padding for transaction data and one for commit record */
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) &&
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
log->l_mp->m_sb.sb_logsunit > 1) {
/* log su roundoff */
unit_bytes += 2*log->l_mp->m_sb.sb_logsunit;
#define XLOG_HEADER_SIZE 512
#define XLOG_REC_SHIFT(log) \
- BTOBB(1 << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+ BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
#define XLOG_TOTAL_REC_SHIFT(log) \
- BTOBB(XLOG_MAX_ICLOGS << (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? \
+ BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
* reset last_blk. Only when last_blk points in the middle of a log
* record do we update last_blk.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
uint h_size = be32_to_cpu(head->h_size);
xhdrs = h_size / XLOG_HEADER_CYCLE_SIZE;
* unmount record if there is one, so we pass the lsn of the
* unmount record rather than the block after it.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
int h_size = be32_to_cpu(rhead->h_size);
int h_version = be32_to_cpu(rhead->h_version);
recp->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
recp->h_cycle = cpu_to_be32(cycle);
recp->h_version = cpu_to_be32(
- XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb) ? 2 : 1);
+ xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
recp->h_lsn = cpu_to_be64(xlog_assign_lsn(cycle, block));
recp->h_tail_lsn = cpu_to_be64(xlog_assign_lsn(tail_cycle, tail_block));
recp->h_fmt = cpu_to_be32(XLOG_FMT);
dp += BBSIZE;
}
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xhdr = (xlog_in_core_2_t *)&iclog->ic_header;
for ( ; i < BTOBB(size); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
be32_to_cpu(rhead->h_chksum), chksum);
cmn_err(CE_DEBUG,
"XFS: Disregard message if filesystem was created with non-DEBUG kernel");
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
cmn_err(CE_DEBUG,
"XFS: LogR this is a LogV2 filesystem\n");
}
dp += BBSIZE;
}
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xhdr = (xlog_in_core_2_t *)rhead;
for ( ; i < BTOBB(be32_to_cpu(rhead->h_len)); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
* Read the header of the tail block and get the iclog buffer size from
* h_size. Use this to tell how many sectors make up the log header.
*/
- if (XFS_SB_VERSION_HASLOGV2(&log->l_mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
/*
* When using variable length iclogs, read first sector of
* iclog header and extract the header size from it. Get a
sbp = &log->l_mp->m_sb;
xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
ASSERT(sbp->sb_magicnum == XFS_SB_MAGIC);
- ASSERT(XFS_SB_GOOD_VERSION(sbp));
+ ASSERT(xfs_sb_good_version(sbp));
xfs_buf_relse(bp);
/* We've re-read the superblock so re-initialize per-cpu counters */
#include "xfs_quota.h"
#include "xfs_fsops.h"
-STATIC void xfs_mount_log_sbunit(xfs_mount_t *, __int64_t);
+STATIC void xfs_mount_log_sb(xfs_mount_t *, __int64_t);
STATIC int xfs_uuid_mount(xfs_mount_t *);
STATIC void xfs_uuid_unmount(xfs_mount_t *mp);
STATIC void xfs_unmountfs_wait(xfs_mount_t *);
{ offsetof(xfs_sb_t, sb_logsectsize),0 },
{ offsetof(xfs_sb_t, sb_logsunit), 0 },
{ offsetof(xfs_sb_t, sb_features2), 0 },
+ { offsetof(xfs_sb_t, sb_bad_features2), 0 },
{ sizeof(xfs_sb_t), 0 }
};
return XFS_ERROR(EWRONGFS);
}
- if (!XFS_SB_GOOD_VERSION(sbp)) {
+ if (!xfs_sb_good_version(sbp)) {
xfs_fs_mount_cmn_err(flags, "bad version");
return XFS_ERROR(EWRONGFS);
}
/*
* Version 1 directory format has never worked on Linux.
*/
- if (unlikely(!XFS_SB_VERSION_HASDIRV2(sbp))) {
+ if (unlikely(!xfs_sb_version_hasdirv2(sbp))) {
xfs_fs_mount_cmn_err(flags,
"file system using version 1 directory format");
return XFS_ERROR(ENOSYS);
to->sb_logsectsize = be16_to_cpu(from->sb_logsectsize);
to->sb_logsunit = be32_to_cpu(from->sb_logsunit);
to->sb_features2 = be32_to_cpu(from->sb_features2);
+ to->sb_bad_features2 = be32_to_cpu(from->sb_bad_features2);
}
/*
* Update superblock with new values
* and log changes
*/
- if (XFS_SB_VERSION_HASDALIGN(sbp)) {
+ if (xfs_sb_version_hasdalign(sbp)) {
if (sbp->sb_unit != mp->m_dalign) {
sbp->sb_unit = mp->m_dalign;
*update_flags |= XFS_SB_UNIT;
}
}
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
- XFS_SB_VERSION_HASDALIGN(&mp->m_sb)) {
+ xfs_sb_version_hasdalign(&mp->m_sb)) {
mp->m_dalign = sbp->sb_unit;
mp->m_swidth = sbp->sb_width;
}
STATIC void
xfs_set_inoalignment(xfs_mount_t *mp)
{
- if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) &&
+ if (xfs_sb_version_hasalign(&mp->m_sb) &&
mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
mp->m_inoalign_mask = mp->m_sb.sb_inoalignmt - 1;
}
xfs_mount_common(mp, sbp);
+ /*
+ * Check for a mismatched features2 values. Older kernels
+ * read & wrote into the wrong sb offset for sb_features2
+ * on some platforms due to xfs_sb_t not being 64bit size aligned
+ * when sb_features2 was added, which made older superblock
+ * reading/writing routines swap it as a 64-bit value.
+ *
+ * For backwards compatibility, we make both slots equal.
+ *
+ * If we detect a mismatched field, we OR the set bits into the
+ * existing features2 field in case it has already been modified; we
+ * don't want to lose any features. We then update the bad location
+ * with the ORed value so that older kernels will see any features2
+ * flags, and mark the two fields as needing updates once the
+ * transaction subsystem is online.
+ */
+ if (xfs_sb_has_mismatched_features2(sbp)) {
+ cmn_err(CE_WARN,
+ "XFS: correcting sb_features alignment problem");
+ sbp->sb_features2 |= sbp->sb_bad_features2;
+ sbp->sb_bad_features2 = sbp->sb_features2;
+ update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2;
+
+ /*
+ * Re-check for ATTR2 in case it was found in bad_features2
+ * slot.
+ */
+ if (xfs_sb_version_hasattr2(&mp->m_sb))
+ mp->m_flags |= XFS_MOUNT_ATTR2;
+
+ }
+
/*
* Check if sb_agblocks is aligned at stripe boundary
* If sb_agblocks is NOT aligned turn off m_dalign since
}
/*
- * If fs is not mounted readonly, then update the superblock
- * unit and width changes.
+ * If fs is not mounted readonly, then update the superblock changes.
*/
if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY))
- xfs_mount_log_sbunit(mp, update_flags);
+ xfs_mount_log_sb(mp, update_flags);
/*
* Initialise the XFS quota management subsystem for this mount
/*
* Used to log changes to the superblock unit and width fields which could
- * be altered by the mount options. Only the first superblock is updated.
+ * be altered by the mount options, as well as any potential sb_features2
+ * fixup. Only the first superblock is updated.
*/
STATIC void
-xfs_mount_log_sbunit(
+xfs_mount_log_sb(
xfs_mount_t *mp,
__int64_t fields)
{
xfs_trans_t *tp;
- ASSERT(fields & (XFS_SB_UNIT|XFS_SB_WIDTH|XFS_SB_UUID));
+ ASSERT(fields & (XFS_SB_UNIT | XFS_SB_WIDTH | XFS_SB_UUID |
+ XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2));
tp = xfs_trans_alloc(mp, XFS_TRANS_SB_UNIT);
if (xfs_trans_reserve(tp, 0, mp->m_sb.sb_sectsize + 128, 0, 0,
/*
* Superblock - in core version. Must match the ondisk version below.
+ * Must be padded to 64 bit alignment.
*/
typedef struct xfs_sb {
__uint32_t sb_magicnum; /* magic number == XFS_SB_MAGIC */
__uint16_t sb_logsectsize; /* sector size for the log, bytes */
__uint32_t sb_logsunit; /* stripe unit size for the log */
__uint32_t sb_features2; /* additional feature bits */
+
+ /*
+ * bad features2 field as a result of failing to pad the sb
+ * structure to 64 bits. Some machines will be using this field
+ * for features2 bits. Easiest just to mark it bad and not use
+ * it for anything else.
+ */
+ __uint32_t sb_bad_features2;
+
+ /* must be padded to 64 bit alignment */
} xfs_sb_t;
/*
- * Superblock - on disk version. Must match the in core version below.
+ * Superblock - on disk version. Must match the in core version above.
+ * Must be padded to 64 bit alignment.
*/
typedef struct xfs_dsb {
__be32 sb_magicnum; /* magic number == XFS_SB_MAGIC */
__be16 sb_logsectsize; /* sector size for the log, bytes */
__be32 sb_logsunit; /* stripe unit size for the log */
__be32 sb_features2; /* additional feature bits */
+ /*
+ * bad features2 field as a result of failing to pad the sb
+ * structure to 64 bits. Some machines will be using this field
+ * for features2 bits. Easiest just to mark it bad and not use
+ * it for anything else.
+ */
+ __be32 sb_bad_features2;
+
+ /* must be padded to 64 bit alignment */
} xfs_dsb_t;
/*
XFS_SBS_GQUOTINO, XFS_SBS_QFLAGS, XFS_SBS_FLAGS, XFS_SBS_SHARED_VN,
XFS_SBS_INOALIGNMT, XFS_SBS_UNIT, XFS_SBS_WIDTH, XFS_SBS_DIRBLKLOG,
XFS_SBS_LOGSECTLOG, XFS_SBS_LOGSECTSIZE, XFS_SBS_LOGSUNIT,
- XFS_SBS_FEATURES2,
+ XFS_SBS_FEATURES2, XFS_SBS_BAD_FEATURES2,
XFS_SBS_FIELDCOUNT
} xfs_sb_field_t;
#define XFS_SB_IFREE XFS_SB_MVAL(IFREE)
#define XFS_SB_FDBLOCKS XFS_SB_MVAL(FDBLOCKS)
#define XFS_SB_FEATURES2 XFS_SB_MVAL(FEATURES2)
+#define XFS_SB_BAD_FEATURES2 XFS_SB_MVAL(BAD_FEATURES2)
#define XFS_SB_NUM_BITS ((int)XFS_SBS_FIELDCOUNT)
#define XFS_SB_ALL_BITS ((1LL << XFS_SB_NUM_BITS) - 1)
#define XFS_SB_MOD_BITS \
(XFS_SB_UUID | XFS_SB_ROOTINO | XFS_SB_RBMINO | XFS_SB_RSUMINO | \
XFS_SB_VERSIONNUM | XFS_SB_UQUOTINO | XFS_SB_GQUOTINO | \
XFS_SB_QFLAGS | XFS_SB_SHARED_VN | XFS_SB_UNIT | XFS_SB_WIDTH | \
- XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2)
+ XFS_SB_ICOUNT | XFS_SB_IFREE | XFS_SB_FDBLOCKS | XFS_SB_FEATURES2 | \
+ XFS_SB_BAD_FEATURES2)
/*
#define XFS_SB_VERSION_NUM(sbp) ((sbp)->sb_versionnum & XFS_SB_VERSION_NUMBITS)
-#define XFS_SB_GOOD_VERSION(sbp) xfs_sb_good_version(sbp)
#ifdef __KERNEL__
static inline int xfs_sb_good_version(xfs_sb_t *sbp)
{
}
#endif /* __KERNEL__ */
-#define XFS_SB_VERSION_TONEW(v) xfs_sb_version_tonew(v)
+/*
+ * Detect a mismatched features2 field. Older kernels read/wrote
+ * this into the wrong slot, so to be safe we keep them in sync.
+ */
+static inline int xfs_sb_has_mismatched_features2(xfs_sb_t *sbp)
+{
+ return (sbp->sb_bad_features2 != sbp->sb_features2);
+}
+
static inline unsigned xfs_sb_version_tonew(unsigned v)
{
return ((((v) == XFS_SB_VERSION_1) ? \
XFS_SB_VERSION_4);
}
-#define XFS_SB_VERSION_TOOLD(v) xfs_sb_version_toold(v)
static inline unsigned xfs_sb_version_toold(unsigned v)
{
return (((v) & (XFS_SB_VERSION_QUOTABIT | XFS_SB_VERSION_ALIGNBIT)) ? \
XFS_SB_VERSION_1)));
}
-#define XFS_SB_VERSION_HASATTR(sbp) xfs_sb_version_hasattr(sbp)
static inline int xfs_sb_version_hasattr(xfs_sb_t *sbp)
{
return ((sbp)->sb_versionnum == XFS_SB_VERSION_2) || \
((sbp)->sb_versionnum & XFS_SB_VERSION_ATTRBIT));
}
-#define XFS_SB_VERSION_ADDATTR(sbp) xfs_sb_version_addattr(sbp)
static inline void xfs_sb_version_addattr(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = (((sbp)->sb_versionnum == XFS_SB_VERSION_1) ? \
(XFS_SB_VERSION_4 | XFS_SB_VERSION_ATTRBIT)));
}
-#define XFS_SB_VERSION_HASNLINK(sbp) xfs_sb_version_hasnlink(sbp)
static inline int xfs_sb_version_hasnlink(xfs_sb_t *sbp)
{
return ((sbp)->sb_versionnum == XFS_SB_VERSION_3) || \
((sbp)->sb_versionnum & XFS_SB_VERSION_NLINKBIT));
}
-#define XFS_SB_VERSION_ADDNLINK(sbp) xfs_sb_version_addnlink(sbp)
static inline void xfs_sb_version_addnlink(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = ((sbp)->sb_versionnum <= XFS_SB_VERSION_2 ? \
((sbp)->sb_versionnum | XFS_SB_VERSION_NLINKBIT));
}
-#define XFS_SB_VERSION_HASQUOTA(sbp) xfs_sb_version_hasquota(sbp)
static inline int xfs_sb_version_hasquota(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_QUOTABIT);
}
-#define XFS_SB_VERSION_ADDQUOTA(sbp) xfs_sb_version_addquota(sbp)
static inline void xfs_sb_version_addquota(xfs_sb_t *sbp)
{
(sbp)->sb_versionnum = \
(XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4 ? \
((sbp)->sb_versionnum | XFS_SB_VERSION_QUOTABIT) : \
- (XFS_SB_VERSION_TONEW((sbp)->sb_versionnum) | \
+ (xfs_sb_version_tonew((sbp)->sb_versionnum) | \
XFS_SB_VERSION_QUOTABIT));
}
-#define XFS_SB_VERSION_HASALIGN(sbp) xfs_sb_version_hasalign(sbp)
static inline int xfs_sb_version_hasalign(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_ALIGNBIT);
}
-#define XFS_SB_VERSION_SUBALIGN(sbp) xfs_sb_version_subalign(sbp)
-static inline void xfs_sb_version_subalign(xfs_sb_t *sbp)
-{
- (sbp)->sb_versionnum = \
- XFS_SB_VERSION_TOOLD((sbp)->sb_versionnum & ~XFS_SB_VERSION_ALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASDALIGN(sbp) xfs_sb_version_hasdalign(sbp)
static inline int xfs_sb_version_hasdalign(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_DALIGNBIT);
}
-#define XFS_SB_VERSION_ADDDALIGN(sbp) xfs_sb_version_adddalign(sbp)
-static inline int xfs_sb_version_adddalign(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_DALIGNBIT);
-}
-
-#define XFS_SB_VERSION_HASSHARED(sbp) xfs_sb_version_hasshared(sbp)
static inline int xfs_sb_version_hasshared(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_SHAREDBIT);
}
-#define XFS_SB_VERSION_ADDSHARED(sbp) xfs_sb_version_addshared(sbp)
-static inline int xfs_sb_version_addshared(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_SUBSHARED(sbp) xfs_sb_version_subshared(sbp)
-static inline int xfs_sb_version_subshared(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum & ~XFS_SB_VERSION_SHAREDBIT);
-}
-
-#define XFS_SB_VERSION_HASDIRV2(sbp) xfs_sb_version_hasdirv2(sbp)
static inline int xfs_sb_version_hasdirv2(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_DIRV2BIT);
}
-#define XFS_SB_VERSION_HASLOGV2(sbp) xfs_sb_version_haslogv2(sbp)
static inline int xfs_sb_version_haslogv2(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_LOGV2BIT);
}
-#define XFS_SB_VERSION_HASEXTFLGBIT(sbp) xfs_sb_version_hasextflgbit(sbp)
static inline int xfs_sb_version_hasextflgbit(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_EXTFLGBIT);
}
-#define XFS_SB_VERSION_ADDEXTFLGBIT(sbp) xfs_sb_version_addextflgbit(sbp)
-static inline int xfs_sb_version_addextflgbit(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum | XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_SUBEXTFLGBIT(sbp) xfs_sb_version_subextflgbit(sbp)
-static inline int xfs_sb_version_subextflgbit(xfs_sb_t *sbp)
-{
- return (sbp)->sb_versionnum = \
- ((sbp)->sb_versionnum & ~XFS_SB_VERSION_EXTFLGBIT);
-}
-
-#define XFS_SB_VERSION_HASSECTOR(sbp) xfs_sb_version_hassector(sbp)
static inline int xfs_sb_version_hassector(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
((sbp)->sb_versionnum & XFS_SB_VERSION_SECTORBIT);
}
-#define XFS_SB_VERSION_HASMOREBITS(sbp) xfs_sb_version_hasmorebits(sbp)
static inline int xfs_sb_version_hasmorebits(xfs_sb_t *sbp)
{
return (XFS_SB_VERSION_NUM(sbp) == XFS_SB_VERSION_4) && \
* For example, for a bit defined as XFS_SB_VERSION2_FUNBIT, has a macro:
*
* SB_VERSION_HASFUNBIT(xfs_sb_t *sbp)
- * ((XFS_SB_VERSION_HASMOREBITS(sbp) &&
+ * ((xfs_sb_version_hasmorebits(sbp) &&
* ((sbp)->sb_features2 & XFS_SB_VERSION2_FUNBIT)
*/
static inline int xfs_sb_version_haslazysbcount(xfs_sb_t *sbp)
{
- return (XFS_SB_VERSION_HASMOREBITS(sbp) && \
+ return (xfs_sb_version_hasmorebits(sbp) && \
((sbp)->sb_features2 & XFS_SB_VERSION2_LAZYSBCOUNTBIT));
}
-#define XFS_SB_VERSION_HASATTR2(sbp) xfs_sb_version_hasattr2(sbp)
static inline int xfs_sb_version_hasattr2(xfs_sb_t *sbp)
{
- return (XFS_SB_VERSION_HASMOREBITS(sbp)) && \
+ return (xfs_sb_version_hasmorebits(sbp)) && \
((sbp)->sb_features2 & XFS_SB_VERSION2_ATTR2BIT);
}
-#define XFS_SB_VERSION_ADDATTR2(sbp) xfs_sb_version_addattr2(sbp)
static inline void xfs_sb_version_addattr2(xfs_sb_t *sbp)
{
((sbp)->sb_versionnum = \
ip->i_d.di_onlink = 0;
memset(&(ip->i_d.di_pad[0]), 0, sizeof(ip->i_d.di_pad));
mp = tp->t_mountp;
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
spin_lock(&mp->m_sb_lock);
- if (!XFS_SB_VERSION_HASNLINK(&mp->m_sb)) {
- XFS_SB_VERSION_ADDNLINK(&mp->m_sb);
+ if (!xfs_sb_version_hasnlink(&mp->m_sb)) {
+ xfs_sb_version_addnlink(&mp->m_sb);
spin_unlock(&mp->m_sb_lock);
xfs_mod_sb(tp, XFS_SB_VERSIONNUM);
} else {
int ronly = (mp->m_flags & XFS_MOUNT_RDONLY);
/* Fail a mount where the logbuf is smaller then the log stripe */
- if (XFS_SB_VERSION_HASLOGV2(&mp->m_sb)) {
+ if (xfs_sb_version_haslogv2(&mp->m_sb)) {
if ((ap->logbufsize <= 0) &&
(mp->m_sb.sb_logsunit > XLOG_BIG_RECORD_BSIZE)) {
mp->m_logbsize = mp->m_sb.sb_logsunit;
}
}
- if (XFS_SB_VERSION_HASATTR2(&mp->m_sb)) {
+ if (xfs_sb_version_hasattr2(&mp->m_sb))
mp->m_flags |= XFS_MOUNT_ATTR2;
- }
/*
* prohibit r/w mounts of read-only filesystems
* check for shared mount.
*/
if (ap->flags & XFSMNT_SHARED) {
- if (!XFS_SB_VERSION_HASSHARED(&mp->m_sb))
+ if (!xfs_sb_version_hasshared(&mp->m_sb))
return XFS_ERROR(EINVAL);
/*
if (!error && logdev && logdev != ddev) {
unsigned int log_sector_size = BBSIZE;
- if (XFS_SB_VERSION_HASSECTOR(&mp->m_sb))
+ if (xfs_sb_version_hassector(&mp->m_sb))
log_sector_size = mp->m_sb.sb_logsectsize;
error = xfs_setsize_buftarg(mp->m_logdev_targp,
mp->m_sb.sb_blocksize,
* actually need to zero the extent edges. Otherwise xfs_bunmapi
* will take care of it for us.
*/
- if (rt && !XFS_SB_VERSION_HASEXTFLGBIT(&mp->m_sb)) {
+ if (rt && !xfs_sb_version_hasextflgbit(&mp->m_sb)) {
nimap = 1;
error = xfs_bmapi(NULL, ip, startoffset_fsb,
1, 0, NULL, 0, &imap, &nimap, NULL, NULL);
#include <linux/thread_info.h>
-#define get_current() (current_thread_info()->task + 0)
+#define get_current() (current_thread_info()->task)
#define current get_current()
#endif /* _ALPHA_CURRENT_H */
#define dma_unmap_single(dev, addr, size, dir) \
pci_unmap_single(alpha_gendev_to_pci(dev), addr, size, dir)
#define dma_alloc_coherent(dev, size, addr, gfp) \
- pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr)
+ __pci_alloc_consistent(alpha_gendev_to_pci(dev), size, addr, gfp)
#define dma_free_coherent(dev, size, va, addr) \
pci_free_consistent(alpha_gendev_to_pci(dev), size, va, addr)
#define dma_map_page(dev, page, off, size, dir) \
--- /dev/null
+#ifndef __LINUX_KVM_ALPHA_H
+#define __LINUX_KVM_ALPHA_H
+
+/* alpha does not support KVM */
+
+#endif
successful and sets *DMA_ADDRP to the pci side dma address as well,
else DMA_ADDRP is undefined. */
-extern void *pci_alloc_consistent(struct pci_dev *, size_t, dma_addr_t *);
+extern void *__pci_alloc_consistent(struct pci_dev *, size_t,
+ dma_addr_t *, gfp_t);
+static inline void *
+pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma)
+{
+ return __pci_alloc_consistent(dev, size, dma, GFP_ATOMIC);
+}
/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
be values that were returned from pci_alloc_consistent. SIZE must
--- /dev/null
+#ifndef __LINUX_KVM_ARM_H
+#define __LINUX_KVM_ARM_H
+
+/* arm does not support KVM */
+
+#endif
extern unsigned short __builtin_bswap_16(unsigned short x);
#endif
+/*
+ * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
+ * the result.
+ */
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
#define __arch__swab32(x) __builtin_bswap_32(x)
#define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
# define __BYTEORDER_HAS_U64__
--- /dev/null
+#ifndef __LINUX_KVM_AVR32_H
+#define __LINUX_KVM_AVR32_H
+
+/* avr32 does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_BLACKFIN_H
+#define __LINUX_KVM_BLACKFIN_H
+
+/* blackfin does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_CRIS_H
+#define __LINUX_KVM_CRIS_H
+
+/* cris does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_FRV_H
+#define __LINUX_KVM_FRV_H
+
+/* frv does not support KVM */
+
+#endif
*/
#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE)
#define STACK_TOP __UL(2 * 1024 * 1024)
-#define STACK_TOP_MAX STACK_TOP
+#define STACK_TOP_MAX __UL(0xc0000000)
/* userspace process size */
#ifdef CONFIG_MMU
*/
static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t pte)
{
+ struct mm_struct *mm;
unsigned long ampr;
- pgd_t *pge = pgd_offset(current->mm, address);
- pud_t *pue = pud_offset(pge, address);
- pmd_t *pme = pmd_offset(pue, address);
- ampr = pme->ste[0] & 0xffffff00;
- ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V;
+ mm = current->mm;
+ if (mm) {
+ pgd_t *pge = pgd_offset(mm, address);
+ pud_t *pue = pud_offset(pge, address);
+ pmd_t *pme = pmd_offset(pue, address);
+
+ ampr = pme->ste[0] & 0xffffff00;
+ ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C |
+ xAMPRx_V;
+ } else {
+ address = ULONG_MAX;
+ ampr = 0;
+ }
asm volatile("movgs %0,scr0\n"
"movgs %0,scr1\n"
#define TBR_TT_TRAP1 (0x81 << 4)
#define TBR_TT_TRAP2 (0x82 << 4)
#define TBR_TT_TRAP3 (0x83 << 4)
+#define TBR_TT_TRAP120 (0xf8 << 4)
+#define TBR_TT_TRAP121 (0xf9 << 4)
+#define TBR_TT_TRAP122 (0xfa << 4)
+#define TBR_TT_TRAP123 (0xfb << 4)
+#define TBR_TT_TRAP124 (0xfc << 4)
+#define TBR_TT_TRAP125 (0xfd << 4)
#define TBR_TT_TRAP126 (0xfe << 4)
#define TBR_TT_BREAK (0xff << 4)
+#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120
+#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121
+#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122
+#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123
+#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124
+#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125
+#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126
+
#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; })
/*
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
-#define set_mb(var, value) do { var = value; mb(); } while (0)
+#define read_barrier_depends() barrier()
-#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() wmb()
-
-#define read_barrier_depends() do {} while(0)
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
+#define set_mb(var, value) \
+ do { xchg(&var, (value)); } while (0)
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do {} while(0)
+#define set_mb(var, value) \
+ do { var = (value); barrier(); } while (0)
+#endif
#define HARD_RESET_NOW() \
do { \
break; \
\
default: \
- __xg_orig = 0; \
+ __xg_orig = (__typeof__(__xg_orig))0; \
asm volatile("break"); \
break; \
} \
(__force uint32_t)__xg_test, \
(__force uint32_t)__xg_new); break; \
default: \
- __xg_orig = 0; \
+ __xg_orig = (__typeof__(__xg_orig))0; \
asm volatile("break"); \
break; \
} \
+header-y += kvm.h
+
ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h)
unifdef-y += a.out.h
endif
--- /dev/null
+#ifndef __LINUX_KVM_H8300_H
+#define __LINUX_KVM_H8300_H
+
+/* h8300 does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_IA64_H
+#define __LINUX_KVM_IA64_H
+
+/* ia64 does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_M32R_H
+#define __LINUX_KVM_M32R_H
+
+/* m32r does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_M68K_H
+#define __LINUX_KVM_M68K_H
+
+/* m68k does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_M68KNOMMU_H
+#define __LINUX_KVM_M68KNOMMU_H
+
+/* m68knommu does not support KVM */
+
+#endif
}
extern void (*flush_icache_range)(unsigned long start, unsigned long end);
-#define flush_cache_vmap(start, end) flush_cache_all()
-#define flush_cache_vunmap(start, end) flush_cache_all()
+
+extern void (*__flush_cache_vmap)(void);
+
+static inline void flush_cache_vmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vmap();
+}
+
+extern void (*__flush_cache_vunmap)(void);
+
+static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
+{
+ if (cpu_has_dc_aliases)
+ __flush_cache_vunmap();
+}
extern void copy_to_user_page(struct vm_area_struct *vma,
struct page *page, unsigned long vaddr, void *dst, const void *src,
--- /dev/null
+#ifndef __LINUX_KVM_MIPS_H
+#define __LINUX_KVM_MIPS_H
+
+/* mips does not support KVM */
+
+#endif
char *cpu_name;
unsigned char cpu_od; /* Set Config[OD] */
unsigned char cpu_bclk; /* Enable BCLK switching */
+ unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
extern struct cpu_spec cpu_specs[];
PB1200_SD1_INSERT_INT,
PB1200_SD1_EJECT_INT,
- PB1200_INT_END (PB1200_INT_BEGIN + 15)
+ PB1200_INT_END = PB1200_INT_BEGIN + 15
};
/* For drivers/pcmcia/au1000_db1x00.c */
--- /dev/null
+#ifndef __LINUX_KVM_MN10300_H
+#define __LINUX_KVM_MN10300_H
+
+/* mn10300 does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_PARISC_H
+#define __LINUX_KVM_PARISC_H
+
+/* parisc does not support KVM */
+
+#endif
include include/asm-generic/Kbuild.asm
+header-y += a.out.h
header-y += auxvec.h
header-y += ioctls.h
header-y += mman.h
header-y += statfs.h
header-y += ps3fb.h
-unifdef-y += a.out.h
unifdef-y += asm-compat.h
unifdef-y += bootx.h
unifdef-y += byteorder.h
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/lmb.h>
+
#include <asm/types.h>
#include <asm/page.h>
#include <asm/prom.h>
-#include <asm/lmb.h>
#include <asm/firmware.h>
struct mschunks_map {
res = CPU_MASK_NONE;
for (i = 0; i < NR_CPUS; i += threads_per_core) {
- cpus_shift_right(tmp, threads_core_mask, i);
+ cpus_shift_left(tmp, threads_core_mask, i);
if (cpus_intersects(threads, tmp))
cpu_set(i, res);
}
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+ unsigned clr, unsigned set)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&dcr_ind_lock, flags);
+ __mtdcr(base_addr, reg);
+ val = (__mfdcr(base_data) & ~clr) | set;
+ __mtdcr(base_data, val);
+ spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
#define mfdcri(base, reg) __mfdcri(DCRN_ ## base ## _CONFIG_ADDR, \
DCRN_ ## base ## _CONFIG_DATA, \
reg)
DCRN_ ## base ## _CONFIG_DATA, \
reg, data)
+#define dcri_clrset(base, reg, clr, set) __dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR, \
+ DCRN_ ## base ## _CONFIG_DATA, \
+ reg, clr, set)
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_DCR_NATIVE_H */
#define SDR0_UART3 0x0123
#define SDR0_CUST0 0x4000
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR 0x00
+#define DCRN_SRAM0_SB1CR 0x01
+#define DCRN_SRAM0_SB2CR 0x02
+#define DCRN_SRAM0_SB3CR 0x03
+#define SRAM_SBCR_BU_MASK 0x00000180
+#define SRAM_SBCR_BS_64KB 0x00000800
+#define SRAM_SBCR_BU_RO 0x00000080
+#define SRAM_SBCR_BU_RW 0x00000180
+#define DCRN_SRAM0_BEAR 0x04
+#define DCRN_SRAM0_BESR0 0x05
+#define DCRN_SRAM0_BESR1 0x06
+#define DCRN_SRAM0_PMEG 0x07
+#define DCRN_SRAM0_CID 0x08
+#define DCRN_SRAM0_REVID 0x09
+#define DCRN_SRAM0_DPC 0x0a
+#define SRAM_DPC_ENABLE 0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG 0x00
+#define L2C_CFG_L2M 0x80000000
+#define L2C_CFG_ICU 0x40000000
+#define L2C_CFG_DCU 0x20000000
+#define L2C_CFG_DCW_MASK 0x1e000000
+#define L2C_CFG_TPC 0x01000000
+#define L2C_CFG_CPC 0x00800000
+#define L2C_CFG_FRAN 0x00200000
+#define L2C_CFG_SS_MASK 0x00180000
+#define L2C_CFG_SS_256 0x00000000
+#define L2C_CFG_CPIM 0x00040000
+#define L2C_CFG_TPIM 0x00020000
+#define L2C_CFG_LIM 0x00010000
+#define L2C_CFG_PMUX_MASK 0x00007000
+#define L2C_CFG_PMUX_SNP 0x00000000
+#define L2C_CFG_PMUX_IF 0x00001000
+#define L2C_CFG_PMUX_DF 0x00002000
+#define L2C_CFG_PMUX_DS 0x00003000
+#define L2C_CFG_PMIM 0x00000800
+#define L2C_CFG_TPEI 0x00000400
+#define L2C_CFG_CPEI 0x00000200
+#define L2C_CFG_NAM 0x00000100
+#define L2C_CFG_SMCM 0x00000080
+#define L2C_CFG_NBRM 0x00000040
+#define L2C_CFG_RDBW 0x00000008 /* only 460EX/GT */
+#define DCRN_L2C0_CMD 0x01
+#define L2C_CMD_CLR 0x80000000
+#define L2C_CMD_DIAG 0x40000000
+#define L2C_CMD_INV 0x20000000
+#define L2C_CMD_CCP 0x10000000
+#define L2C_CMD_CTE 0x08000000
+#define L2C_CMD_STRC 0x04000000
+#define L2C_CMD_STPC 0x02000000
+#define L2C_CMD_RPMC 0x01000000
+#define L2C_CMD_HCC 0x00800000
+#define DCRN_L2C0_ADDR 0x02
+#define DCRN_L2C0_DATA 0x03
+#define DCRN_L2C0_SR 0x04
+#define L2C_SR_CC 0x80000000
+#define L2C_SR_CPE 0x40000000
+#define L2C_SR_TPE 0x20000000
+#define L2C_SR_LRU 0x10000000
+#define L2C_SR_PCS 0x08000000
+#define DCRN_L2C0_REVID 0x05
+#define DCRN_L2C0_SNP0 0x06
+#define DCRN_L2C0_SNP1 0x07
+#define L2C_SNP_BA_MASK 0xffff0000
+#define L2C_SNP_SSR_MASK 0x0000f000
+#define L2C_SNP_SSR_32G 0x0000f000
+#define L2C_SNP_ESR 0x00000800
+
#endif /* __DCR_REGS_H__ */
--- /dev/null
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_HAVE_GPIO_LIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+ return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+ __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+ return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+ return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+ return -EINVAL;
+}
+
+#endif /* CONFIG_HAVE_GPIO_LIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
--- /dev/null
+/*
+ * Copyright © 2008 Stephen Rothwell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
+#define _ASM_POWERPC_ISERIES_ALPACA_H
+
+/*
+ * This is the part of the paca that the iSeries hypervisor
+ * needs to be statically initialised. Immediately after boot
+ * we switch to the normal Linux paca.
+ */
+struct alpaca {
+ struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
+ const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+};
+
+#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
+++ /dev/null
-/*
- * Copyright (C) 2001 Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-#define _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H
-
-/*
- * This control block contains the data that is shared between PLIC
- * and the OS
- */
-
-struct ItLpRegSave {
- u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003
- u16 xSize; // Size of this class 004-005
- u8 xInUse; // Area is live 006-007
- u8 xRsvd1[9]; // Reserved 007-00F
-
- u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F
- u32 xCTRL; // Control Register 170-173
- u32 xDEC; // Decrementer 174-177
- u32 xFPSCR; // FP Status and Control Reg 178-17B
- u32 xPVR; // Processor Version Number 17C-17F
-
- u64 xMMCR0; // Monitor Mode Control Reg 0 180-187
- u32 xPMC1; // Perf Monitor Counter 1 188-18B
- u32 xPMC2; // Perf Monitor Counter 2 18C-18F
- u32 xPMC3; // Perf Monitor Counter 3 190-193
- u32 xPMC4; // Perf Monitor Counter 4 194-197
- u32 xPIR; // Processor ID Reg 198-19B
-
- u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F
- u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3
- u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7
- u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB
- u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF
- u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3
- u32 xTSC; // Thread Switch Control 1B4-1B7
- u32 xTST; // Thread Switch Timeout 1B8-1BB
- u32 xRsvd; // Reserved 1BC-1BF
-
- u64 xACCR; // Address Compare Control Reg 1C0-1C7
- u64 xIMR; // Instruction Match Register 1C8-1CF
- u64 xSDR1; // Storage Description Reg 1 1D0-1D7
- u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF
- u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7
- u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF
- u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7
- u64 xTB; // Time Base Register 1F8-1FF
-
- u64 xFPR[32]; // Floating Point Registers 200-2FF
-
- u64 xMSR; // Machine State Register 300-307
- u64 xNIA; // Next Instruction Address 308-30F
-
- u64 xDABR; // Data Address Breakpoint Reg 310-317
- u64 xIABR; // Inst Address Breakpoint Reg 318-31F
-
- u64 xHID0; // HW Implementation Dependent0 320-327
-
- u64 xHID4; // HW Implementation Dependent4 328-32F
- u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337
- u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F
- u64 xSDAR; // Sample Data Address Register 340-347
- u64 xSIAR; // Sample Inst Address Register 348-34F
-
- u8 xRsvd3[176]; // Reserved 350-3FF
-};
-
-extern struct ItLpRegSave iseries_reg_save[];
-
-#endif /* _ASM_POWERPC_ISERIES_IT_LP_REG_SAVE_H */
--- /dev/null
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+/* powerpc does not support KVM */
+
+#endif
#ifndef _ASM_POWERPC_LMB_H
#define _ASM_POWERPC_LMB_H
-#ifdef __KERNEL__
-/*
- * Definitions for talking to the Open Firmware PROM on
- * Power Macintosh computers.
- *
- * Copyright (C) 2001 Peter Bergner, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
+#include <asm/udbg.h>
-#include <linux/init.h>
-#include <asm/prom.h>
+#define LMB_DBG(fmt...) udbg_printf(fmt)
-#define MAX_LMB_REGIONS 128
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define LMB_REAL_LIMIT lowmem_end_addr
+#else
+#define LMB_REAL_LIMIT 0
+#endif
-struct lmb_property {
- unsigned long base;
- unsigned long size;
-};
-
-struct lmb_region {
- unsigned long cnt;
- unsigned long size;
- struct lmb_property region[MAX_LMB_REGIONS+1];
-};
-
-struct lmb {
- unsigned long debug;
- unsigned long rmo_size;
- struct lmb_region memory;
- struct lmb_region reserved;
-};
-
-extern struct lmb lmb;
-
-extern void __init lmb_init(void);
-extern void __init lmb_analyze(void);
-extern long __init lmb_add(unsigned long base, unsigned long size);
-extern long __init lmb_reserve(unsigned long base, unsigned long size);
-extern unsigned long __init lmb_alloc(unsigned long size, unsigned long align);
-extern unsigned long __init lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init __lmb_alloc_base(unsigned long size,
- unsigned long align, unsigned long max_addr);
-extern unsigned long __init lmb_phys_mem_size(void);
-extern unsigned long __init lmb_end_of_DRAM(void);
-extern void __init lmb_enforce_memory_limit(unsigned long memory_limit);
-extern int __init lmb_is_reserved(unsigned long addr);
-
-extern void lmb_dump_all(void);
-
-static inline unsigned long
-lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].size;
-}
-static inline unsigned long
-lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return type->region[region_nr].base >> PAGE_SHIFT;
-}
-static inline unsigned long
-lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
-{
- return lmb_start_pfn(type, region_nr) +
- lmb_size_pages(type, region_nr);
-}
-
-#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_LMB_H */
unsigned long vflags,
int psize, int ssize);
long (*hpte_remove)(unsigned long hpte_group);
+ void (*hpte_removebolted)(unsigned long ea,
+ int psize, int ssize);
void (*flush_hash_range)(unsigned long number, int local);
/* special for kexec, to be called in real mode, linar mapping is
May be NULL. */
void (*init)(void);
- void (*setup_io_mappings)(void);
-
- void (*early_serial_map)(void);
void (*kgdb_map_scc)(void);
/*
#define __MACIO_ASIC_H__
#ifdef __KERNEL__
-#include <asm/of_device.h>
+#include <linux/of_device.h>
extern struct bus_type macio_bus_type;
#ifndef __ASSEMBLY__
-typedef unsigned long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
#ifndef __ASSEMBLY__
-typedef unsigned long long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
#define SPRN_M_TW 799
#ifndef __ASSEMBLY__
-typedef unsigned long phys_addr_t;
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
#ifndef __ASSEMBLY__
-#ifndef CONFIG_PHYS_64BIT
-typedef unsigned long phys_addr_t;
-#else
-typedef unsigned long long phys_addr_t;
-#endif
-
typedef struct {
unsigned long id;
unsigned long vdso_base;
unsigned long vdso_base;
} mm_context_t;
-typedef unsigned long phys_addr_t;
-
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
VSID_MODULUS_256M)
#define KERNEL_VSID(ea) VSID_SCRAMBLE(GET_ESID(ea))
-/* Physical address used by some IO functions */
-typedef unsigned long phys_addr_t;
-
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
- * processor except for the first two pointers that point to the
- * lppaca area and the ItLpRegSave area for this CPU. The lppaca
- * object is currently contained within the PACA but it doesn't need
- * to be.
+ * processor.
*/
struct paca_struct {
/*
* avoid cacheline bouncing.
*/
- /*
- * MAGIC: These first two pointers can't be moved - they're
- * accessed by the firmware
- */
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
-#ifdef CONFIG_PPC_ISERIES
- void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
-#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
#define PAGE_OFFSET ASM_CONST(CONFIG_KERNEL_START)
#define KERNELBASE (PAGE_OFFSET + PHYSICAL_START)
+#define LOAD_OFFSET PAGE_OFFSET
#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define VM_DATA_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS32
-#define PPC_MEMSTART 0
-
#ifdef CONFIG_NOT_COHERENT_CACHE
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
#endif
/*
- * Copyright (C) 2006 PA Semi, Inc
+ * Copyright (C) 2006-2008 PA Semi, Inc
*
* Hardware register layout and descriptor formats for the on-board
* DMA engine on PA Semi PWRficient. Used by ethernet, function and security
PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */
PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */
PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */
+ PAS_DMA_COM_CFG = 0x114, /* Common config reg */
+ PAS_DMA_TXF_SFLG0 = 0x140, /* Set flags */
+ PAS_DMA_TXF_SFLG1 = 0x144, /* Set flags */
+ PAS_DMA_TXF_CFLG0 = 0x148, /* Set flags */
+ PAS_DMA_TXF_CFLG1 = 0x14c, /* Set flags */
};
#define PAS_DMA_TXCHAN_TCMDSTA_DA 0x00000100
#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */
+#define PAS_DMA_TXCHAN_CFG_TY_COPY 0x00000001 /* Type = copy only */
+#define PAS_DMA_TXCHAN_CFG_TY_FUNC 0x00000002 /* Type = function */
+#define PAS_DMA_TXCHAN_CFG_TY_XOR 0x00000003 /* Type = xor only */
#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c
#define PAS_DMA_TXCHAN_CFG_TATTR_S 2
#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
PAS_DMA_TXCHAN_CFG_TATTR_M)
-#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0
+#define PAS_DMA_TXCHAN_CFG_LPDQ 0x00000800
+#define PAS_DMA_TXCHAN_CFG_LPSQ 0x00000400
+#define PAS_DMA_TXCHAN_CFG_WT_M 0x000003c0
#define PAS_DMA_TXCHAN_CFG_WT_S 6
#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
PAS_DMA_TXCHAN_CFG_WT_M)
XCT_COPY_LLEN_M)
#define XCT_COPY_SE 0x0000000000000001ull
+/* Function descriptor fields */
+#define XCT_FUN_T 0x8000000000000000ull
+#define XCT_FUN_ST 0x4000000000000000ull
+#define XCT_FUN_RR_M 0x3000000000000000ull
+#define XCT_FUN_RR_NORES 0x0000000000000000ull
+#define XCT_FUN_RR_8BRES 0x1000000000000000ull
+#define XCT_FUN_RR_24BRES 0x2000000000000000ull
+#define XCT_FUN_RR_40BRES 0x3000000000000000ull
+#define XCT_FUN_I 0x0800000000000000ull
+#define XCT_FUN_O 0x0400000000000000ull
+#define XCT_FUN_E 0x0200000000000000ull
+#define XCT_FUN_FUN_M 0x01c0000000000000ull
+#define XCT_FUN_FUN_S 54
+#define XCT_FUN_FUN(x) ((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M 0x0038000000000000ull
+#define XCT_FUN_CRM_NOP 0x0000000000000000ull
+#define XCT_FUN_CRM_SIG 0x0008000000000000ull
+#define XCT_FUN_LLEN_M 0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S 32
+#define XCT_FUN_LLEN(x) ((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M 0x00000000f8000000ull
+#define XCT_FUN_SHL_S 27
+#define XCT_FUN_SHL(x) ((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M 0x0000000007c00000ull
+#define XCT_FUN_HSZ_M 0x00000000003c0000ull
+#define XCT_FUN_ALG_M 0x0000000000038000ull
+#define XCT_FUN_HP 0x0000000000004000ull
+#define XCT_FUN_BCM_M 0x0000000000003800ull
+#define XCT_FUN_BCP_M 0x0000000000000600ull
+#define XCT_FUN_SIG_M 0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4 0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6 0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4 0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6 0x0000000000000170ull
+#define XCT_FUN_A 0x0000000000000008ull
+#define XCT_FUN_C 0x0000000000000004ull
+#define XCT_FUN_AL2 0x0000000000000002ull
+#define XCT_FUN_SE 0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M 0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S 32
+#define XCT_FUNRES_8B_CRC_M 0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S 0
+
/* Control descriptor fields */
#define CTRL_CMD_T 0x8000000000000000ull
#define CTRL_CMD_META_EVT 0x2000000000000000ull
#define CTRL_CMD_O 0x0400000000000000ull
-#define CTRL_CMD_REG_M 0x000000000000000full
+#define CTRL_CMD_ETYPE_M 0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT 0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET 0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR 0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET 0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR 0x0038000000000000ull
+#define CTRL_CMD_REG_M 0x000000000000007full
#define CTRL_CMD_REG_S 0
#define CTRL_CMD_REG(x) ((((long)(x)) << CTRL_CMD_REG_S) & \
CTRL_CMD_REG_M)
extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
dma_addr_t *handle);
+/* Routines to allocate flags (events) for channel syncronization */
+extern int pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
/* Initialize the library, must be called before any other functions */
extern int pasemi_dma_init(void);
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_ADDRESS 0
-#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
-#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
-
#define pte_ERROR(e) \
printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
(unsigned long long)pte_val(e))
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH)
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+ defined(CONFIG_KPROBES)
/* We want the debuggers to be able to set breakpoints anywhere, so
* don't write protect the kernel text */
#define _PAGE_RAM_TEXT _PAGE_RAM
#define pmd_page_vaddr(pmd) \
((unsigned long) (pmd_val(pmd) & PAGE_MASK))
#define pmd_page(pmd) \
- (mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+ pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
#endif
/* to find an entry in a kernel page-table-directory */
--- /dev/null
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END (1UL<<28)
+
+struct phyp_dump {
+ /* Memory that is reserved during very early boot. */
+ unsigned long init_reserve_start;
+ unsigned long init_reserve_size;
+ /* cmd line options during boot */
+ unsigned long reserve_bootvar;
+ unsigned long phyp_dump_at_boot;
+ /* Check status during boot if dump supported, active & present*/
+ unsigned long phyp_dump_configured;
+ unsigned long phyp_dump_is_active;
+ /* store cpu & hpte size */
+ unsigned long cpu_state_size;
+ unsigned long hpte_region_size;
+ /* previous scratch area values */
+ unsigned long reserved_scratch_addr;
+ unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+ const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
#ifdef __KERNEL__
-#include <asm/of_device.h>
-
#define PMI_TYPE_FREQ_CHANGE 0x01
#define PMI_READ_TYPE 0
#define PMI_READ_DATA0 1
--- /dev/null
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
};
void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
-void ps3_sys_manager_power_off(void);
-void ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
struct ps3_prealloc {
const char *name;
#ifdef CONFIG_MEMORY_HOTPLUG
extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
#else
#define __HAVE_ARCH_STRNCPY
#define __HAVE_ARCH_STRLEN
#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
#define __HAVE_ARCH_STRCAT
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
extern char * strncpy(char *,const char *, __kernel_size_t);
extern __kernel_size_t strlen(const char *);
extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
extern char * strcat(char *, const char *);
extern void * memset(void *,int,__kernel_size_t);
extern void * memcpy(void *,const void *,__kernel_size_t);
typedef __vector128 vector128;
+/* Physical address used by some IO functions */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
#ifdef __powerpc64__
typedef u64 dma_addr_t;
#else
--- /dev/null
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/* s390 does not support KVM */
+
+#endif
+++ /dev/null
-/*
- * Architecture specific parts of the Floppy driver
- * include/asm-i386/floppy.h
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995
- */
-#ifndef __ASM_SH_FLOPPY_H
-#define __ASM_SH_FLOPPY_H
-
-#include <linux/vmalloc.h>
-
-
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- */
-#define _CROSS_64KB(a,s,vdma) \
-(!vdma && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
-
-#define SW fd_routine[use_virtual_dma&1]
-#define CSW fd_routine[can_use_virtual_dma & 1]
-
-
-#define fd_inb(port) inb_p(port)
-#define fd_outb(value,port) outb_p(value,port)
-
-#define fd_request_dma() CSW._request_dma(FLOPPY_DMA,"floppy")
-#define fd_free_dma() CSW._free_dma(FLOPPY_DMA)
-#define fd_enable_irq() enable_irq(FLOPPY_IRQ)
-#define fd_disable_irq() disable_irq(FLOPPY_IRQ)
-#define fd_free_irq() free_irq(FLOPPY_IRQ, NULL)
-#define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA)
-#define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size)
-#define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io)
-
-#define FLOPPY_CAN_FALLBACK_ON_NODMA
-
-static int virtual_dma_count;
-static int virtual_dma_residue;
-static char *virtual_dma_addr;
-static int virtual_dma_mode;
-static int doing_pdma;
-
-static void floppy_hardint(int irq, void *dev_id, struct pt_regs * regs)
-{
- register unsigned char st;
-
-#undef TRACE_FLPY_INT
-
-#ifdef TRACE_FLPY_INT
- static int calls=0;
- static int bytes=0;
- static int dma_wait=0;
-#endif
- if(!doing_pdma) {
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-
-#ifdef TRACE_FLPY_INT
- if(!calls)
- bytes = virtual_dma_count;
-#endif
-
- {
- register int lcount;
- register char *lptr;
-
- st = 1;
- for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
- lcount; lcount--, lptr++) {
- st=inb(virtual_dma_port+4) & 0xa0 ;
- if(st != 0xa0)
- break;
- if(virtual_dma_mode)
- outb_p(*lptr, virtual_dma_port+5);
- else
- *lptr = inb_p(virtual_dma_port+5);
- }
- virtual_dma_count = lcount;
- virtual_dma_addr = lptr;
- st = inb(virtual_dma_port+4);
- }
-
-#ifdef TRACE_FLPY_INT
- calls++;
-#endif
- if(st == 0x20)
- return;
- if(!(st & 0x20)) {
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-#ifdef TRACE_FLPY_INT
- printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
- virtual_dma_count, virtual_dma_residue, calls, bytes,
- dma_wait);
- calls = 0;
- dma_wait=0;
-#endif
- doing_pdma = 0;
- floppy_interrupt(irq, dev_id, regs);
- return;
- }
-#ifdef TRACE_FLPY_INT
- if(!virtual_dma_count)
- dma_wait++;
-#endif
-}
-
-static void fd_disable_dma(void)
-{
- if(! (can_use_virtual_dma & 1))
- disable_dma(FLOPPY_DMA);
- doing_pdma = 0;
- virtual_dma_residue += virtual_dma_count;
- virtual_dma_count=0;
-}
-
-static int vdma_request_dma(unsigned int dmanr, const char * device_id)
-{
- return 0;
-}
-
-static void vdma_nop(unsigned int dummy)
-{
-}
-
-
-static int vdma_get_dma_residue(unsigned int dummy)
-{
- return virtual_dma_count + virtual_dma_residue;
-}
-
-
-static int fd_request_irq(void)
-{
- if(can_use_virtual_dma)
- return request_irq(FLOPPY_IRQ, floppy_hardint,
- IRQF_DISABLED, "floppy", NULL);
- else
- return request_irq(FLOPPY_IRQ, floppy_interrupt,
- IRQF_DISABLED, "floppy", NULL);
-}
-
-static unsigned long dma_mem_alloc(unsigned long size)
-{
- return __get_dma_pages(GFP_KERNEL,get_order(size));
-}
-
-
-static unsigned long vdma_mem_alloc(unsigned long size)
-{
- return (unsigned long) vmalloc(size);
-
-}
-
-#define nodma_mem_alloc(size) vdma_mem_alloc(size)
-
-static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
-{
- if((unsigned int) addr >= (unsigned int) high_memory)
- return vfree((void *)addr);
- else
- free_pages(addr, get_order(size));
-}
-
-#define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size)
-
-static void _fd_chose_dma_mode(char *addr, unsigned long size)
-{
- if(can_use_virtual_dma == 2) {
- if((unsigned int) addr >= (unsigned int) high_memory ||
- virt_to_phys(addr) >= 0x10000000)
- use_virtual_dma = 1;
- else
- use_virtual_dma = 0;
- } else {
- use_virtual_dma = can_use_virtual_dma & 1;
- }
-}
-
-#define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size)
-
-
-static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
- doing_pdma = 1;
- virtual_dma_port = io;
- virtual_dma_mode = (mode == DMA_MODE_WRITE);
- virtual_dma_addr = addr;
- virtual_dma_count = size;
- virtual_dma_residue = 0;
- return 0;
-}
-
-static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
-{
-#ifdef FLOPPY_SANITY_CHECK
- if (CROSS_64KB(addr, size)) {
- printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
- return -1;
- }
-#endif
-
- __flush_purge_region(addr, size);
-
- /* actual, physical DMA */
- doing_pdma = 0;
- clear_dma_ff(FLOPPY_DMA);
- set_dma_mode(FLOPPY_DMA,mode);
- set_dma_addr(FLOPPY_DMA,virt_to_phys(addr));
- set_dma_count(FLOPPY_DMA,size);
- enable_dma(FLOPPY_DMA);
- return 0;
-}
-
-static struct fd_routine_l {
- int (*_request_dma)(unsigned int dmanr, const char * device_id);
- void (*_free_dma)(unsigned int dmanr);
- int (*_get_dma_residue)(unsigned int dummy);
- unsigned long (*_dma_mem_alloc) (unsigned long size);
- int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
-} fd_routine[] = {
- {
- request_dma,
- free_dma,
- get_dma_residue,
- dma_mem_alloc,
- hard_dma_setup
- },
- {
- vdma_request_dma,
- vdma_nop,
- vdma_get_dma_residue,
- vdma_mem_alloc,
- vdma_dma_setup
- }
-};
-
-
-static int FDC1 = 0x3f0;
-static int FDC2 = -1;
-
-/*
- * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock
- * is needed to prevent corrupted CMOS RAM in case "insmod floppy"
- * coincides with another rtc CMOS user. Paul G.
- */
-#define FLOPPY0_TYPE (4)
-#define FLOPPY1_TYPE (0)
-
-#define N_FDC 2
-#define N_DRIVE 8
-
-#define EXTRA_FLOPPY_PARAMS
-
-#endif /* __ASM_SH_FLOPPY_H */
#ifndef __ASM_SH_FPU_H
#define __ASM_SH_FPU_H
-#define SR_FD 0x00008000
-
#ifndef __ASSEMBLY__
+#include <linux/preempt.h>
#include <asm/ptrace.h>
#ifdef CONFIG_SH_FPU
extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
#else
+
#define release_fpu(regs) do { } while (0)
#define grab_fpu(regs) do { } while (0)
-#define save_fpu(tsk, regs) do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
#endif
extern int do_fpu_inst(unsigned short, struct pt_regs *);
-#define unlazy_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- save_fpu(tsk, regs); \
- } \
-} while (0)
-
-#define clear_fpu(tsk, regs) do { \
- if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
- clear_tsk_thread_flag(tsk, TIF_USEDFPU); \
- release_fpu(regs); \
- } \
-} while (0)
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+ save_fpu(tsk, regs);
+ preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+ preempt_disable();
+ if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+ clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+ release_fpu(regs);
+ }
+ preempt_enable();
+}
#endif /* __ASSEMBLY__ */
--- /dev/null
+#ifndef __LINUX_KVM_SH_H
+#define __LINUX_KVM_SH_H
+
+/* sh does not support KVM */
+
+#endif
#define __ASM_SH_PROCESSOR_H
#include <asm/cpu-features.h>
-#include <asm/fpu.h>
#ifndef __ASSEMBLY__
/*
*/
#define SR_DSP 0x00001000
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
/*
* FPU structure and data
#endif
#define SR_IMASK 0x000000f0
+#define SR_FD 0x00008000
#define SR_SSTEP 0x08000000
#ifndef __ASSEMBLY__
--- /dev/null
+#ifndef __LINUX_KVM_SPARC_H
+#define __LINUX_KVM_SPARC_H
+
+/* sparc does not support KVM */
+
+#endif
extern void init_cur_cpu_trap(struct thread_info *);
extern void setup_tba(void);
extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
extern unsigned long real_hard_smp_processor_id(void);
-/* $Id: dcu.h,v 1.2 2001/03/01 23:23:33 davem Exp $ */
#ifndef _SPARC64_DCU_H
#define _SPARC64_DCU_H
+#include <linux/const.h>
+
/* UltraSparc-III Data Cache Unit Control Register */
-#define DCU_CP 0x0002000000000000 /* Physical Cache Enable w/o mmu*/
-#define DCU_CV 0x0001000000000000 /* Virtual Cache Enable w/o mmu */
-#define DCU_ME 0x0000800000000000 /* NC-store Merging Enable */
-#define DCU_RE 0x0000400000000000 /* RAW bypass Enable */
-#define DCU_PE 0x0000200000000000 /* PCache Enable */
-#define DCU_HPE 0x0000100000000000 /* HW prefetch Enable */
-#define DCU_SPE 0x0000080000000000 /* SW prefetch Enable */
-#define DCU_SL 0x0000040000000000 /* Secondary load steering Enab */
-#define DCU_WE 0x0000020000000000 /* WCache enable */
-#define DCU_PM 0x000001fe00000000 /* PA Watchpoint Byte Mask */
-#define DCU_VM 0x00000001fe000000 /* VA Watchpoint Byte Mask */
-#define DCU_PR 0x0000000001000000 /* PA Watchpoint Read Enable */
-#define DCU_PW 0x0000000000800000 /* PA Watchpoint Write Enable */
-#define DCU_VR 0x0000000000400000 /* VA Watchpoint Read Enable */
-#define DCU_VW 0x0000000000200000 /* VA Watchpoint Write Enable */
-#define DCU_DM 0x0000000000000008 /* DMMU Enable */
-#define DCU_IM 0x0000000000000004 /* IMMU Enable */
-#define DCU_DC 0x0000000000000002 /* Data Cache Enable */
-#define DCU_IC 0x0000000000000001 /* Instruction Cache Enable */
+#define DCU_CP _AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu */
+#define DCU_CV _AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu */
+#define DCU_ME _AC(0x0000800000000000,UL) /* NC-store Merging Enable */
+#define DCU_RE _AC(0x0000400000000000,UL) /* RAW bypass Enable */
+#define DCU_PE _AC(0x0000200000000000,UL) /* PCache Enable */
+#define DCU_HPE _AC(0x0000100000000000,UL) /* HW prefetch Enable */
+#define DCU_SPE _AC(0x0000080000000000,UL) /* SW prefetch Enable */
+#define DCU_SL _AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE _AC(0x0000020000000000,UL) /* WCache enable */
+#define DCU_PM _AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask */
+#define DCU_VM _AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask */
+#define DCU_PR _AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable */
+#define DCU_PW _AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR _AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable */
+#define DCU_VW _AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM _AC(0x0000000000000008,UL) /* DMMU Enable */
+#define DCU_IM _AC(0x0000000000000004,UL) /* IMMU Enable */
+#define DCU_DC _AC(0x0000000000000002,UL) /* Data Cache Enable */
+#define DCU_IC _AC(0x0000000000000001,UL) /* Instruction Cache Enable */
#endif /* _SPARC64_DCU_H */
__u64 fault_info_va;
__u64 fault_info_pa;
__u64 thread_reg;
- struct hvtramp_mapping maps[2];
+ struct hvtramp_mapping maps[1];
};
extern void hv_cpu_startup(unsigned long hvdescr_pa);
extern void virt_irq_free(unsigned int virt_irq);
#endif
+extern void __init init_IRQ(void);
extern void fixup_irqs(void);
static inline void set_softint(unsigned long bits)
--- /dev/null
+#ifndef __LINUX_KVM_SPARC64_H
+#define __LINUX_KVM_SPARC64_H
+
+/* sparc64 does not support KVM */
+
+#endif
--- /dev/null
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT 0
+
+#endif /* !(_SPARC64_LMB_H) */
#include <asm/page.h>
#include <asm/processor.h>
-/* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 32MB).
- * The page copy blockops can use 0x2000000 to 0x4000000.
- * The TSB is mapped in the 0x4000000 to 0x6000000 range.
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
* The PROM resides in an area spanning 0xf0000000 to 0x100000000.
* The vmalloc area spans 0x100000000 to 0x200000000.
* Since modules need to be in the lowest 32-bits of the address space,
* There is a single static kernel PMD which maps from 0x0 to address
* 0x400000000.
*/
-#define TLBTEMP_BASE _AC(0x0000000002000000,UL)
-#define TSBMAP_BASE _AC(0x0000000004000000,UL)
+#define TLBTEMP_BASE _AC(0x0000000006000000,UL)
+#define TSBMAP_BASE _AC(0x0000000008000000,UL)
#define MODULES_VADDR _AC(0x0000000010000000,UL)
#define MODULES_LEN _AC(0x00000000e0000000,UL)
#define MODULES_END _AC(0x00000000f0000000,UL)
extern void pgtable_cache_init(void);
extern void sun4v_register_fault_status(void);
extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
extern unsigned long cmdline_memory_size;
#endif
#define TASK_SIZE ((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+ (test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+ (1UL << 32UL) : TASK_SIZE)
#ifdef __KERNEL__
#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE)
SPITFIRE_HIGHEST_LOCKED_TLBENT : \
CHEETAH_HIGHEST_LOCKED_TLBENT)
+extern int num_kernel_image_mappings;
+
/* The data cache is write through, so this just invalidates the
* specified line.
*/
--- /dev/null
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
-/* $Id: timer.h,v 1.3 2000/05/09 17:40:15 davem Exp $
- * timer.h: System timer definitions for sun5.
+/* timer.h: System timer definitions for sun5.
*
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_TIMER_H
#define _SPARC64_TIMER_H
#include <linux/types.h>
-
+#include <linux/init.h>
struct sparc64_tick_ops {
unsigned long (*get_tick)(void);
extern struct sparc64_tick_ops *tick_ops;
extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
#endif /* _SPARC64_TIMER_H */
--- /dev/null
+#ifndef __LINUX_KVM_UM_H
+#define __LINUX_KVM_UM_H
+
+/* um does not support KVM */
+
+#endif
--- /dev/null
+#ifndef __LINUX_KVM_V850_H
+#define __LINUX_KVM_V850_H
+
+/* v850 does not support KVM */
+
+#endif
* If the area you are trying to map is a PCI BAR you should have a
* look at pci_iomap().
*/
-extern void __iomem *ioremap_nocache(unsigned long offset, unsigned long size);
-extern void __iomem *ioremap_cache(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
/*
* The default ioremap() behavior is non-cached:
*/
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
{
return ioremap_nocache(offset, size);
}
* it's useful if some control registers are in such an area and write combining
* or read caching is not desirable:
*/
-extern void __iomem *ioremap_nocache(unsigned long offset, unsigned long size);
-extern void __iomem *ioremap_cache(unsigned long offset, unsigned long size);
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
/*
* The default ioremap() behavior is non-cached:
*/
-static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
{
return ioremap_nocache(offset, size);
}
native_restore_fl(flags);
}
+#ifdef CONFIG_X86_VSMP
+
+/*
+ * Interrupt control for the VSMP architecture:
+ */
+
+static inline void raw_local_irq_disable(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+ raw_local_irq_restore((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+ unsigned long flags = __raw_local_save_flags();
+ raw_local_irq_restore((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
+}
+
+#else
+
static inline void raw_local_irq_disable(void)
{
native_irq_disable();
native_irq_enable();
}
+#endif
+
/*
* Used in the idle loop; sti takes one instruction cycle
* to complete:
#define raw_local_irq_save(flags) \
do { (flags) = __raw_local_irq_save(); } while (0)
+#ifdef CONFIG_X86_VSMP
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+ return !(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC);
+}
+#else
static inline int raw_irqs_disabled_flags(unsigned long flags)
{
return !(flags & X86_EFLAGS_IF);
}
+#endif
static inline int raw_irqs_disabled(void)
{
#ifndef __ASSEMBLY__
#include <asm/hw_irq.h>
-/*G:031 First, how does our Guest contact the Host to ask for privileged
+/*G:031 But first, how does our Guest contact the Host to ask for privileged
* operations? There are two ways: the direct way is to make a "hypercall",
* to make requests of the Host Itself.
*
#ifdef CONFIG_X86_32
#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
-#define prevent_tail_call(ret) __asm__ ("" : "=r" (ret) : "0" (ret))
/*
* For 32-bit UML - mark functions implemented in assembly that use
* regparm input parameters:
*/
#define asmregparm __attribute__((regparm(3)))
+
+/*
+ * Make sure the compiler doesn't do anything stupid with the
+ * arguments on the stack - they are owned by the *caller*, not
+ * the callee. This just fools gcc into not spilling into them,
+ * and keeps it from doing tailcall recursion and/or using the
+ * stack slots for temporaries, since they are live and "used"
+ * all the way to the end of the function.
+ *
+ * NOTE! On x86-64, all the arguments are in registers, so this
+ * only matters on a 32-bit kernel.
+ */
+#define asmlinkage_protect(n, ret, args...) \
+ __asmlinkage_protect##n(ret, ##args)
+#define __asmlinkage_protect_n(ret, args...) \
+ __asm__ __volatile__ ("" : "=r" (ret) : "0" (ret), ##args)
+#define __asmlinkage_protect0(ret) \
+ __asmlinkage_protect_n(ret)
+#define __asmlinkage_protect1(ret, arg1) \
+ __asmlinkage_protect_n(ret, "g" (arg1))
+#define __asmlinkage_protect2(ret, arg1, arg2) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2))
+#define __asmlinkage_protect3(ret, arg1, arg2, arg3) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3))
+#define __asmlinkage_protect4(ret, arg1, arg2, arg3, arg4) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4))
+#define __asmlinkage_protect5(ret, arg1, arg2, arg3, arg4, arg5) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4), "g" (arg5))
+#define __asmlinkage_protect6(ret, arg1, arg2, arg3, arg4, arg5, arg6) \
+ __asmlinkage_protect_n(ret, "g" (arg1), "g" (arg2), "g" (arg3), \
+ "g" (arg4), "g" (arg5), "g" (arg6))
+
#endif
#ifdef CONFIG_X86_ALIGNMENT_16
extern void rdc_gpio_set_value(unsigned gpio, int value);
extern int rdc_gpio_direction_input(unsigned gpio);
extern int rdc_gpio_direction_output(unsigned gpio, int value);
-
+extern int rdc_gpio_request(unsigned gpio, const char *label);
+extern void rdc_gpio_free(unsigned gpio);
+extern void __init rdc321x_gpio_setup(void);
/* Wrappers for the arch-neutral GPIO API */
static inline int gpio_request(unsigned gpio, const char *label)
{
- /* Not yet implemented */
- return 0;
+ return rdc_gpio_request(gpio, label);
}
static inline void gpio_free(unsigned gpio)
{
- /* Not yet implemented */
+ rdc_gpio_free(gpio);
}
static inline int gpio_direction_input(unsigned gpio)
/* General purpose configuration and data registers */
#define RDC3210_CFGREG_ADDR 0x0CF8
#define RDC3210_CFGREG_DATA 0x0CFC
-#define RDC_MAX_GPIO 0x3A
+
+#define RDC321X_GPIO_CTRL_REG1 0x48
+#define RDC321X_GPIO_CTRL_REG2 0x84
+#define RDC321X_GPIO_DATA_REG1 0x4c
+#define RDC321X_GPIO_DATA_REG2 0x88
+
+#define RDC321X_MAX_GPIO 58
#define P6_NOP7 ".byte 0x0f,0x1f,0x80,0,0,0,0\n"
#define P6_NOP8 ".byte 0x0f,0x1f,0x84,0x00,0,0,0,0\n"
-#if defined(CONFIG_MK8)
-#define ASM_NOP1 K8_NOP1
-#define ASM_NOP2 K8_NOP2
-#define ASM_NOP3 K8_NOP3
-#define ASM_NOP4 K8_NOP4
-#define ASM_NOP5 K8_NOP5
-#define ASM_NOP6 K8_NOP6
-#define ASM_NOP7 K8_NOP7
-#define ASM_NOP8 K8_NOP8
-#elif defined(CONFIG_MK7)
+#if defined(CONFIG_MK7)
#define ASM_NOP1 K7_NOP1
#define ASM_NOP2 K7_NOP2
#define ASM_NOP3 K7_NOP3
#define ASM_NOP6 P6_NOP6
#define ASM_NOP7 P6_NOP7
#define ASM_NOP8 P6_NOP8
+#elif defined(CONFIG_X86_64)
+#define ASM_NOP1 K8_NOP1
+#define ASM_NOP2 K8_NOP2
+#define ASM_NOP3 K8_NOP3
+#define ASM_NOP4 K8_NOP4
+#define ASM_NOP5 K8_NOP5
+#define ASM_NOP6 K8_NOP6
+#define ASM_NOP7 K8_NOP7
+#define ASM_NOP8 K8_NOP8
#else
#define ASM_NOP1 GENERIC_NOP1
#define ASM_NOP2 GENERIC_NOP2
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
#define __PAGE_KERNEL_EXEC_NOCACHE (__PAGE_KERNEL_EXEC | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_PCD | _PAGE_PWT)
+#define __PAGE_KERNEL_UC_MINUS (__PAGE_KERNEL | _PAGE_PCD)
#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
#define __PAGE_KERNEL_VSYSCALL_NOCACHE (__PAGE_KERNEL_VSYSCALL | _PAGE_PCD | _PAGE_PWT)
#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
#define PAGE_KERNEL_EXEC MAKE_GLOBAL(__PAGE_KERNEL_EXEC)
#define PAGE_KERNEL_RX MAKE_GLOBAL(__PAGE_KERNEL_RX)
#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE)
+#define PAGE_KERNEL_UC_MINUS MAKE_GLOBAL(__PAGE_KERNEL_UC_MINUS)
#define PAGE_KERNEL_EXEC_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_EXEC_NOCACHE)
#define PAGE_KERNEL_LARGE MAKE_GLOBAL(__PAGE_KERNEL_LARGE)
#define PAGE_KERNEL_LARGE_EXEC MAKE_GLOBAL(__PAGE_KERNEL_LARGE_EXEC)
--- /dev/null
+#ifndef __LINUX_KVM_XTENSA_H
+#define __LINUX_KVM_XTENSA_H
+
+/* xtensa does not support KVM */
+
+#endif
unifdef-y += eventpoll.h
unifdef-y += signalfd.h
unifdef-y += ext2_fs.h
-unifdef-y += ext3_fs.h
unifdef-y += fb.h
unifdef-y += fcntl.h
unifdef-y += filter.h
unifdef-y += isdnif.h
unifdef-y += isdn_divertif.h
unifdef-y += isdn_ppp.h
-unifdef-y += jbd.h
unifdef-y += joystick.h
unifdef-y += kdev_t.h
unifdef-y += kd.h
unifdef-y += kernelcapi.h
unifdef-y += kernel.h
unifdef-y += keyboard.h
-unifdef-$(CONFIG_HAVE_KVM) += kvm.h
+unifdef-y += kvm.h
unifdef-y += llc.h
unifdef-y += loop.h
unifdef-y += lp.h
return (word >> shift) | (word << (32 - shift));
}
+/**
+ * rol16 - rotate a 16-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 rol16(__u16 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (16 - shift));
+}
+
+/**
+ * ror16 - rotate a 16-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u16 ror16(__u16 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (16 - shift));
+}
+
+/**
+ * rol8 - rotate an 8-bit value left
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 rol8(__u8 word, unsigned int shift)
+{
+ return (word << shift) | (word >> (8 - shift));
+}
+
+/**
+ * ror8 - rotate an 8-bit value right
+ * @word: value to rotate
+ * @shift: bits to roll
+ */
+static inline __u8 ror8(__u8 word, unsigned int shift)
+{
+ return (word >> shift) | (word << (8 - shift));
+}
+
static inline unsigned fls_long(unsigned long l)
{
if (sizeof(l) == 4)
void (*bind)(struct cgroup_subsys *ss, struct cgroup *root);
int subsys_id;
int active;
+ int disabled;
int early_init;
#define MAX_CGROUP_TYPE_NAMELEN 32
const char *name;
struct compat_timeval __user *tvp);
asmlinkage long compat_sys_wait4(compat_pid_t pid,
- compat_uint_t *stat_addr, int options,
- struct compat_rusage *ru);
+ compat_uint_t __user *stat_addr, int options,
+ struct compat_rusage __user *ru);
#define BITS_PER_COMPAT_LONG (8*sizeof(compat_long_t))
unsigned int power_usage; /* in mW */
unsigned int target_residency; /* in US */
- unsigned int usage;
- unsigned int time; /* in US */
+ unsigned long long usage;
+ unsigned long long time; /* in US */
int (*enter) (struct cpuidle_device *dev,
struct cpuidle_state *state);
/* --- Helper iov-locking functions --- */
struct dma_page_list {
- char *base_address;
+ char __user *base_address;
int nr_pages;
struct page **pages;
};
#define in_softirq() (softirq_count())
#define in_interrupt() (irq_count())
+/*
+ * Are we running in atomic context? WARNING: this macro cannot
+ * always detect atomic context; in particular, it cannot know about
+ * held spinlocks in non-preemptible kernels. Thus it should not be
+ * used in the general case to determine whether sleeping is possible.
+ * Do not use in_atomic() in driver code.
+ */
#define in_atomic() ((preempt_count() & ~PREEMPT_ACTIVE) != 0)
#ifdef CONFIG_PREEMPT
*/
#define Tn_INT_ROUTE_CAP_MASK (0xffffffff00000000ULL)
-#define Tn_INT_ROUTE_CAP_SHIFT (32UL)
+#define Tn_INI_ROUTE_CAP_SHIFT (32UL)
#define Tn_FSB_INT_DELCAP_MASK (0x8000UL)
#define Tn_FSB_INT_DELCAP_SHIFT (15)
#define Tn_FSB_EN_CNF_MASK (0x4000UL)
#include <asm/semaphore.h>
#include <asm/mutex.h>
-#if defined(CRIS) || defined(FRV)
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV)
# define SUPPORT_VLB_SYNC 0
#else
# define SUPPORT_VLB_SYNC 1
static inline struct input_dev *input_get_device(struct input_dev *dev)
{
- return to_input_dev(get_device(&dev->dev));
+ return dev ? to_input_dev(get_device(&dev->dev)) : NULL;
}
static inline void input_put_device(struct input_dev *dev)
{
- put_device(&dev->dev);
+ if (dev)
+ put_device(&dev->dev);
}
static inline void *input_get_drvdata(struct input_dev *dev)
#define IOCONTEXT_H
#include <linux/radix-tree.h>
+#include <linux/rcupdate.h>
/*
* This is the per-process anticipatory I/O scheduler state.
void (*dtor)(struct io_context *); /* destructor */
void (*exit)(struct io_context *); /* called on task exit */
+
+ struct rcu_head rcu_head;
};
/*
* a new device, we simply need to write a new virtio driver and create support
* for it in the Launcher: this code won't need to change.
*
+ * Virtio devices are also used by kvm, so we can simply reuse their optimized
+ * device drivers. And one day when everyone uses virtio, my plan will be
+ * complete. Bwahahahah!
+ *
* Devices are described by a simplified ID, a status byte, and some "config"
* bytes which describe this device's configuration. This is placed by the
* Launcher just above the top of physical memory:
/* The number of virtqueues (first in config array) */
__u8 num_vq;
/* The number of bytes of feature bits. Multiply by 2: one for host
- * features and one for guest acknowledgements. */
+ * features and one for Guest acknowledgements. */
__u8 feature_len;
/* The number of bytes of the config array after virtqueues. */
__u8 config_len;
ATA_EH_SOFTRESET = (1 << 1),
ATA_EH_HARDRESET = (1 << 2),
ATA_EH_ENABLE_LINK = (1 << 3),
+ ATA_EH_LPM = (1 << 4), /* link power management action */
ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
ATA_EH_PERDEV_MASK = ATA_EH_REVALIDATE,
ATA_EHI_RESUME_LINK = (1 << 1), /* resume link (reset modifier) */
ATA_EHI_NO_AUTOPSY = (1 << 2), /* no autopsy */
ATA_EHI_QUIET = (1 << 3), /* be quiet */
- ATA_EHI_LPM = (1 << 4), /* link power management action */
ATA_EHI_DID_SOFTRESET = (1 << 16), /* already soft-reset this port */
ATA_EHI_DID_HARDRESET = (1 << 17), /* already soft-reset this port */
ATAPI_READ = 0, /* READs */
ATAPI_WRITE = 1, /* WRITEs */
ATAPI_READ_CD = 2, /* READ CD [MSF] */
- ATAPI_MISC = 3, /* the rest */
+ ATAPI_PASS_THRU = 3, /* SAT pass-thru */
+ ATAPI_MISC = 4, /* the rest */
};
enum ata_xfer_mask {
unsigned int sect_size;
unsigned int nbytes;
+ unsigned int extrabytes;
unsigned int curbytes;
struct scatterlist *cursg;
*/
extern void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
extern void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
+extern int atapi_cmd_type(u8 opcode);
extern void ata_tf_to_fis(const struct ata_taskfile *tf,
u8 pmp, int is_cmd, u8 *fis);
extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
return NULL;
}
+static inline unsigned int ata_qc_raw_nbytes(struct ata_queued_cmd *qc)
+{
+ return qc->nbytes - min(qc->extrabytes, qc->nbytes);
+}
+
static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
memset(tf, 0, sizeof(*tf));
qc->flags = 0;
qc->cursg = NULL;
qc->cursg_ofs = 0;
- qc->nbytes = qc->curbytes = 0;
+ qc->nbytes = qc->extrabytes = qc->curbytes = 0;
qc->n_elem = 0;
qc->err_mask = 0;
qc->sect_size = ATA_SECT_SIZE;
ata_id_has_flush_ext(dev->id);
}
-static inline int atapi_cmd_type(u8 opcode)
-{
- switch (opcode) {
- case GPCMD_READ_10:
- case GPCMD_READ_12:
- return ATAPI_READ;
-
- case GPCMD_WRITE_10:
- case GPCMD_WRITE_12:
- case GPCMD_WRITE_AND_VERIFY_10:
- return ATAPI_WRITE;
-
- case GPCMD_READ_CD:
- case GPCMD_READ_CD_MSF:
- return ATAPI_READ_CD;
-
- default:
- return ATAPI_MISC;
- }
-}
-
static inline unsigned int ac_err_mask(u8 status)
{
if (status & (ATA_BUSY | ATA_DRQ))
# define asmregparm
#endif
-#ifndef prevent_tail_call
-# define prevent_tail_call(ret) do { } while (0)
+/*
+ * This is used by architectures to keep arguments on the stack
+ * untouched by the compiler by keeping them live until the end.
+ * The argument stack may be owned by the assembly-language
+ * caller, not the callee, and gcc doesn't always understand
+ * that.
+ *
+ * We have the return value, and a maximum of six arguments.
+ *
+ * This should always be followed by a "return ret" for the
+ * protection to work (ie no more work that the compiler might
+ * end up needing stack temporaries for).
+ */
+/* Assembly files may be compiled with -traditional .. */
+#ifndef __ASSEMBLY__
+#ifndef asmlinkage_protect
+# define asmlinkage_protect(n, ret, args...) do { } while (0)
+#endif
#endif
#ifndef __ALIGN
--- /dev/null
+#ifndef _LINUX_LMB_H
+#define _LINUX_LMB_H
+#ifdef __KERNEL__
+
+/*
+ * Logical memory blocks.
+ *
+ * Copyright (C) 2001 Peter Bergner, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#define MAX_LMB_REGIONS 128
+
+struct lmb_property {
+ u64 base;
+ u64 size;
+};
+
+struct lmb_region {
+ unsigned long cnt;
+ u64 size;
+ struct lmb_property region[MAX_LMB_REGIONS+1];
+};
+
+struct lmb {
+ unsigned long debug;
+ u64 rmo_size;
+ struct lmb_region memory;
+ struct lmb_region reserved;
+};
+
+extern struct lmb lmb;
+
+extern void __init lmb_init(void);
+extern void __init lmb_analyze(void);
+extern long __init lmb_add(u64 base, u64 size);
+extern long __init lmb_reserve(u64 base, u64 size);
+extern u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64, u64, int *));
+extern u64 __init lmb_alloc(u64 size, u64 align);
+extern u64 __init lmb_alloc_base(u64 size,
+ u64, u64 max_addr);
+extern u64 __init __lmb_alloc_base(u64 size,
+ u64 align, u64 max_addr);
+extern u64 __init lmb_phys_mem_size(void);
+extern u64 __init lmb_end_of_DRAM(void);
+extern void __init lmb_enforce_memory_limit(u64 memory_limit);
+extern int __init lmb_is_reserved(u64 addr);
+
+extern void lmb_dump_all(void);
+
+static inline u64
+lmb_size_bytes(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].size;
+}
+static inline u64
+lmb_size_pages(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_size_bytes(type, region_nr) >> PAGE_SHIFT;
+}
+static inline u64
+lmb_start_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return type->region[region_nr].base >> PAGE_SHIFT;
+}
+static inline u64
+lmb_end_pfn(struct lmb_region *type, unsigned long region_nr)
+{
+ return lmb_start_pfn(type, region_nr) +
+ lmb_size_pages(type, region_nr);
+}
+
+#include <asm/lmb.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _LINUX_LMB_H */
atomic_t mnt_count;
int mnt_expiry_mark; /* true if marked for expiry */
int mnt_pinned;
+ int mnt_ghosts;
};
static inline struct vfsmount *mntget(struct vfsmount *mnt)
int mnt_flags, struct list_head *fslist);
extern void mark_mounts_for_expiry(struct list_head *mounts);
-extern void shrink_submounts(struct vfsmount *mountpoint, struct list_head *mounts);
extern spinlock_t vfsmount_lock;
extern dev_t name_to_dev_t(char *name);
static inline void napi_complete(struct napi_struct *n)
{
- local_irq_disable();
+ unsigned long flags;
+
+ local_irq_save(flags);
__napi_complete(n);
- local_irq_enable();
+ local_irq_restore(flags);
}
/**
}
/* Use this variant when it is known for sure that it
- * is executing from interrupt context.
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
*/
extern void dev_kfree_skb_irq(struct sk_buff *skb);
/* Use this variant in places where it could be invoked
- * either from interrupt or non-interrupt context.
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
*/
extern void dev_kfree_skb_any(struct sk_buff *skb);
int *lenp);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
+extern int of_device_is_available(const struct device_node *device);
extern const void *of_get_property(const struct device_node *node,
const char *name,
int *lenp);
--- /dev/null
+/*
+ * OF helpers for the GPIO API
+ *
+ * Copyright (c) 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_GPIO_H
+#define __LINUX_OF_GPIO_H
+
+#include <linux/errno.h>
+#include <asm/gpio.h>
+
+#ifdef CONFIG_OF_GPIO
+
+/*
+ * Generic OF GPIO chip
+ */
+struct of_gpio_chip {
+ struct gpio_chip gc;
+ int gpio_cells;
+ int (*xlate)(struct of_gpio_chip *of_gc, struct device_node *np,
+ const void *gpio_spec);
+};
+
+static inline struct of_gpio_chip *to_of_gpio_chip(struct gpio_chip *gc)
+{
+ return container_of(gc, struct of_gpio_chip, gc);
+}
+
+/*
+ * OF GPIO chip for memory mapped banks
+ */
+struct of_mm_gpio_chip {
+ struct of_gpio_chip of_gc;
+ void (*save_regs)(struct of_mm_gpio_chip *mm_gc);
+ void __iomem *regs;
+};
+
+static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
+{
+ struct of_gpio_chip *of_gc = to_of_gpio_chip(gc);
+
+ return container_of(of_gc, struct of_mm_gpio_chip, of_gc);
+}
+
+extern int of_get_gpio(struct device_node *np, int index);
+extern int of_mm_gpiochip_add(struct device_node *np,
+ struct of_mm_gpio_chip *mm_gc);
+extern int of_gpio_simple_xlate(struct of_gpio_chip *of_gc,
+ struct device_node *np,
+ const void *gpio_spec);
+#else
+
+/* Drivers may not strictly depend on the GPIO support, so let them link. */
+static inline int of_get_gpio(struct device_node *np, int index)
+{
+ return -ENOSYS;
+}
+
+#endif /* CONFIG_OF_GPIO */
+
+#endif /* __LINUX_OF_GPIO_H */
--- /dev/null
+/*
+ * Generic I2C API implementation for PowerPC.
+ *
+ * Copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_OF_I2C_H
+#define __LINUX_OF_I2C_H
+
+#include <linux/i2c.h>
+
+#ifdef CONFIG_OF_I2C
+
+void of_register_i2c_devices(struct i2c_adapter *adap,
+ struct device_node *adap_node);
+
+#endif /* CONFIG_OF_I2C */
+
+#endif /* __LINUX_OF_I2C_H */
int pci_find_ext_capability(struct pci_dev *dev, int cap);
int pci_find_ht_capability(struct pci_dev *dev, int ht_cap);
int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap);
-void pcie_wait_pending_transaction(struct pci_dev *dev);
struct pci_bus *pci_find_next_bus(const struct pci_bus *from);
struct pci_dev *pci_get_device(unsigned int vendor, unsigned int device,
return 0;
}
-static inline void pcie_wait_pending_transaction(struct pci_dev *dev)
-{ }
-
/* Power management related routines */
static inline int pci_save_state(struct pci_dev *dev)
{
struct pnp_dev {
struct device dev; /* Driver Model device interface */
u64 dma_mask;
- unsigned char number; /* used as an index, must be unique */
+ unsigned int number; /* used as an index, must be unique */
int status;
struct list_head global_list; /* node in global list of devices */
extern void sched_idle_next(void);
+#if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
+extern void wake_up_idle_cpu(int cpu);
+#else
+static inline void wake_up_idle_cpu(int cpu) { }
+#endif
+
#ifdef CONFIG_SCHED_DEBUG
extern unsigned int sysctl_sched_latency;
extern unsigned int sysctl_sched_min_granularity;
* atomic_dec_and_lock - lock on reaching reference count zero
* @atomic: the atomic counter
* @lock: the spinlock in question
+ *
+ * Decrements @atomic by 1. If the result is 0, returns true and locks
+ * @lock. Returns false for all other cases.
*/
extern int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
#define atomic_dec_and_lock(atomic, lock) \
/* device can't resume correctly so reset it instead */
#define USB_QUIRK_RESET_RESUME 0x00000002
+
+/* device can't handle Set-Interface requests */
+#define USB_QUIRK_NO_SET_INTF 0x00000004
US_FLAG(CAPACITY_HEURISTICS, 0x00001000) \
/* sometimes sizes is too big */ \
US_FLAG(MAX_SECTORS_MIN,0x00002000) \
- /* Sets max_sectors to arch min */
+ /* Sets max_sectors to arch min */ \
+ US_FLAG(BULK_IGNORE_TAG,0x00004000) \
+ /* Ignore tag mismatch in bulk operations */
#define US_FLAG(name, value) US_FL_##name = value ,
* Returns NULL or the "data" token handed to add_buf.
* @disable_cb: disable callbacks
* vq: the struct virtqueue we're talking about.
+ * Note that this is not necessarily synchronous, hence unreliable and only
+ * useful as an optimization.
* @enable_cb: restart callbacks after disable_cb.
* vq: the struct virtqueue we're talking about.
* This re-enables callbacks; it returns "false" if there are pending
* checking for more work, and enabling callbacks.
*
* Locking rules are straightforward: the driver is responsible for
- * locking. No two operations may be invoked simultaneously.
+ * locking. No two operations may be invoked simultaneously, with the exception
+ * of @disable_cb.
*
* All operations can be called in any context.
*/
extern struct list_head llc_sap_list;
extern rwlock_t llc_sap_list_lock;
-extern unsigned char llc_station_mac_sa[ETH_ALEN];
extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1; /* size of receive window */
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/**
xid_info->fmt_id = LLC_XID_FMT_ID;
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1;
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/* LLC Type 2 FRMR response information field format */
#ifndef LLC_SAP_H
#define LLC_SAP_H
+
+#include <asm/types.h>
+
/*
* Copyright (c) 1997 by Procom Technology,Inc.
* 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
unsigned char prim);
-extern struct sk_buff *llc_alloc_frame(struct sock *sk,
- struct net_device *dev);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size);
extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
struct sk_buff *skb,
extern void pneigh_enqueue(struct neigh_table *tbl, struct neigh_parms *p,
struct sk_buff *skb);
extern struct pneigh_entry *pneigh_lookup(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev, int creat);
+extern struct pneigh_entry *__pneigh_lookup(struct neigh_table *tbl,
+ struct net *net,
+ const void *key,
+ struct net_device *dev);
extern int pneigh_delete(struct neigh_table *tbl, struct net *net, const void *key, struct net_device *dev);
extern void neigh_app_ns(struct neighbour *n);
#else /* #ifdef defined(CONFIG_IPV6) */
-static inline void sctp_v6_pf_init(void) { return 0; }
+static inline void sctp_v6_pf_init(void) { return; }
static inline void sctp_v6_pf_exit(void) { return; }
static inline int sctp_v6_protosw_init(void) { return 0; }
static inline void sctp_v6_protosw_exit(void) { return; }
return tp->packets_out - tcp_left_out(tp) + tp->retrans_out;
}
+extern int tcp_limit_reno_sacked(struct tcp_sock *tp);
+
/* If cwnd > ssthresh, we may raise ssthresh to be half-way to cwnd.
* The exception is rate halving phase, when cwnd is decreasing towards
* ssthresh.
* transformer. */
const struct xfrm_type *type;
struct xfrm_mode *inner_mode;
+ struct xfrm_mode *inner_mode_iaf;
struct xfrm_mode *outer_mode;
/* Security context */
extern int xfrm_register_mode(struct xfrm_mode *mode, int family);
extern int xfrm_unregister_mode(struct xfrm_mode *mode, int family);
+static inline int xfrm_af2proto(unsigned int family)
+{
+ switch(family) {
+ case AF_INET:
+ return IPPROTO_IPIP;
+ case AF_INET6:
+ return IPPROTO_IPV6;
+ default:
+ return 0;
+ }
+}
+
+static inline struct xfrm_mode *xfrm_ip2inner_mode(struct xfrm_state *x, int ipproto)
+{
+ if ((ipproto == IPPROTO_IPIP && x->props.family == AF_INET) ||
+ (ipproto == IPPROTO_IPV6 && x->props.family == AF_INET6))
+ return x->inner_mode;
+ else
+ return x->inner_mode_iaf;
+}
+
struct xfrm_tmpl
{
/* id in template is interpreted as:
__be16 id;
__be16 frag_off;
+ /* IP header length (excluding options or extension headers). */
+ u8 ihl;
+
/* TOS for IPv4, class for IPv6. */
u8 tos;
/* Protocol for IPv4, NH for IPv6. */
u8 protocol;
+ /* Option length for IPv4, zero for IPv6. */
+ u8 optlen;
+
/* Used by IPv6 only, zero for IPv4. */
u8 flow_lbl[3];
};
extern int xfrm_input_resume(struct sk_buff *skb, int nexthdr);
extern int xfrm_output_resume(struct sk_buff *skb, int err);
extern int xfrm_output(struct sk_buff *skb);
+extern int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm4_extract_header(struct sk_buff *skb);
extern int xfrm4_extract_input(struct xfrm_state *x, struct sk_buff *skb);
extern int xfrm4_rcv_encap(struct sk_buff *skb, int nexthdr, __be32 spi,
#include <asm/uaccess.h>
#include <asm/div64.h>
#include <linux/blkdev.h> /* sector_div */
+#include <linux/pid_namespace.h>
/*
* These constants control the amount of freespace that suspend and
/*
* External references and all of the globals.
*/
-static void do_acct_process(struct file *);
+static void do_acct_process(struct pid_namespace *ns, struct file *);
/*
* This structure is used so that all the data protected by lock
volatile int active;
volatile int needcheck;
struct file *file;
+ struct pid_namespace *ns;
struct timer_list timer;
};
static void acct_file_reopen(struct file *file)
{
struct file *old_acct = NULL;
+ struct pid_namespace *old_ns = NULL;
if (acct_globals.file) {
old_acct = acct_globals.file;
+ old_ns = acct_globals.ns;
del_timer(&acct_globals.timer);
acct_globals.active = 0;
acct_globals.needcheck = 0;
}
if (file) {
acct_globals.file = file;
+ acct_globals.ns = get_pid_ns(task_active_pid_ns(current));
acct_globals.needcheck = 0;
acct_globals.active = 1;
/* It's been deleted if it was used before so this is safe */
if (old_acct) {
mnt_unpin(old_acct->f_path.mnt);
spin_unlock(&acct_globals.lock);
- do_acct_process(old_acct);
+ do_acct_process(old_ns, old_acct);
filp_close(old_acct, NULL);
+ put_pid_ns(old_ns);
spin_lock(&acct_globals.lock);
}
}
/*
* do_acct_process does all actual work. Caller holds the reference to file.
*/
-static void do_acct_process(struct file *file)
+static void do_acct_process(struct pid_namespace *ns, struct file *file)
{
struct pacct_struct *pacct = ¤t->signal->pacct;
acct_t ac;
ac.ac_gid16 = current->gid;
#endif
#if ACCT_VERSION==3
- ac.ac_pid = current->tgid;
- ac.ac_ppid = current->real_parent->tgid;
+ ac.ac_pid = task_tgid_nr_ns(current, ns);
+ rcu_read_lock();
+ ac.ac_ppid = task_tgid_nr_ns(rcu_dereference(current->real_parent), ns);
+ rcu_read_unlock();
#endif
spin_lock_irq(¤t->sighand->siglock);
void acct_process(void)
{
struct file *file = NULL;
+ struct pid_namespace *ns;
/*
* accelerate the common fastpath:
return;
}
get_file(file);
+ ns = get_pid_ns(acct_globals.ns);
spin_unlock(&acct_globals.lock);
- do_acct_process(file);
+ do_acct_process(ns, file);
fput(file);
+ put_pid_ns(ns);
}
/**
* audit_string_contains_control - does a string need to be logged in hex
- * @string - string to be checked
- * @len - max length of the string to check
+ * @string: string to be checked
+ * @len: max length of the string to check
*/
int audit_string_contains_control(const char *string, size_t len)
{
/**
* audit_log_n_untrustedstring - log a string that may contain random characters
* @ab: audit_buffer
- * @len: lenth of string (not including trailing null)
+ * @len: length of string (not including trailing null)
* @string: string to be logged
*
* This code will escape a string that is passed to it if the string
if (!*token)
return -EINVAL;
if (!strcmp(token, "all")) {
- opts->subsys_bits = (1 << CGROUP_SUBSYS_COUNT) - 1;
+ /* Add all non-disabled subsystems */
+ int i;
+ opts->subsys_bits = 0;
+ for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+ struct cgroup_subsys *ss = subsys[i];
+ if (!ss->disabled)
+ opts->subsys_bits |= 1ul << i;
+ }
} else if (!strcmp(token, "noprefix")) {
set_bit(ROOT_NOPREFIX, &opts->flags);
} else if (!strncmp(token, "release_agent=", 14)) {
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
ss = subsys[i];
if (!strcmp(token, ss->name)) {
- set_bit(i, &opts->subsys_bits);
+ if (!ss->disabled)
+ set_bit(i, &opts->subsys_bits);
break;
}
}
kfree(pidarray);
} else {
- ctr->buf = 0;
+ ctr->buf = NULL;
ctr->bufsz = 0;
}
file->private_data = ctr;
/* Skip this hierarchy if it has no active subsystems */
if (!root->actual_subsys_bits)
continue;
+ seq_printf(m, "%lu:", root->subsys_bits);
for_each_subsys(root, ss)
seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
seq_putc(m, ':');
{
int i;
- seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\n");
+ seq_puts(m, "#subsys_name\thierarchy\tnum_cgroups\tenabled\n");
mutex_lock(&cgroup_mutex);
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
- seq_printf(m, "%s\t%lu\t%d\n",
+ seq_printf(m, "%s\t%lu\t%d\t%d\n",
ss->name, ss->root->subsys_bits,
- ss->root->number_of_cgroups);
+ ss->root->number_of_cgroups, !ss->disabled);
}
mutex_unlock(&cgroup_mutex);
return 0;
static int cgroupstats_open(struct inode *inode, struct file *file)
{
- return single_open(file, proc_cgroupstats_show, 0);
+ return single_open(file, proc_cgroupstats_show, NULL);
}
static struct file_operations proc_cgroupstats_operations = {
spin_unlock(&release_list_lock);
mutex_unlock(&cgroup_mutex);
}
+
+static int __init cgroup_disable(char *str)
+{
+ int i;
+ char *token;
+
+ while ((token = strsep(&str, ",")) != NULL) {
+ if (!*token)
+ continue;
+
+ for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
+ struct cgroup_subsys *ss = subsys[i];
+
+ if (!strcmp(token, ss->name)) {
+ ss->disabled = 1;
+ printk(KERN_INFO "Disabling %s control group"
+ " subsystem\n", ss->name);
+ break;
+ }
+ }
+ }
+ return 1;
+}
+__setup("cgroup_disable=", cgroup_disable);
put_pid(pid);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(5, ret, which, upid, infop, options, ru);
return ret;
}
put_pid(pid);
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(4, ret, upid, stat_addr, options, ru);
return ret;
}
{
BUG_ON(mm == &init_mm);
mm_free_pgd(mm);
- mm_free_cgroup(mm);
destroy_context(mm);
free_mm(mm);
}
spin_unlock(&mmlist_lock);
}
put_swap_token(mm);
+ mm_free_cgroup(mm);
mmdrop(mm);
}
}
*/
static void get_futex_key_refs(union futex_key *key)
{
- if (key->both.ptr == 0)
+ if (key->both.ptr == NULL)
return;
switch (key->both.offset & (FUT_OFF_INODE|FUT_OFF_MMSHARED)) {
case FUT_OFF_INODE:
.kill_sb = kill_anon_super,
};
-static int __init init(void)
+static int __init futex_init(void)
{
u32 curval;
int i;
return 0;
}
-__initcall(init);
+__initcall(futex_init);
return 0;
}
-static void __user *futex_uaddr(struct robust_list *entry,
+static void __user *futex_uaddr(struct robust_list __user *entry,
compat_long_t futex_offset)
{
compat_uptr_t base = ptr_to_compat(entry);
char ptype;
/*
- * disabling preemption to make sure the teardown of the callbacks can
- * be done correctly when they are in modules and they insure RCU read
- * coherency.
+ * preempt_disable does two things : disabling preemption to make sure
+ * the teardown of the callbacks can be done correctly when they are in
+ * modules and they insure RCU read coherency.
*/
preempt_disable();
- ptype = ACCESS_ONCE(mdata->ptype);
+ ptype = mdata->ptype;
if (likely(!ptype)) {
marker_probe_func *func;
/* Must read the ptype before ptr. They are not data dependant,
* so we put an explicit smp_rmb() here. */
smp_rmb();
- func = ACCESS_ONCE(mdata->single.func);
+ func = mdata->single.func;
/* Must read the ptr before private data. They are not data
* dependant, so we put an explicit smp_rmb() here. */
smp_rmb();
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = ACCESS_ONCE(mdata->multi);
+ multi = mdata->multi;
for (i = 0; multi[i].func; i++) {
va_start(args, fmt);
multi[i].func(multi[i].probe_private, call_private, fmt,
char ptype;
preempt_disable();
- ptype = ACCESS_ONCE(mdata->ptype);
+ ptype = mdata->ptype;
if (likely(!ptype)) {
marker_probe_func *func;
/* Must read the ptype before ptr. They are not data dependant,
* so we put an explicit smp_rmb() here. */
smp_rmb();
- func = ACCESS_ONCE(mdata->single.func);
+ func = mdata->single.func;
/* Must read the ptr before private data. They are not data
* dependant, so we put an explicit smp_rmb() here. */
smp_rmb();
* in the fast path, so put the explicit barrier here.
*/
smp_read_barrier_depends();
- multi = ACCESS_ONCE(mdata->multi);
+ multi = mdata->multi;
for (i = 0; multi[i].func; i++)
multi[i].func(multi[i].probe_private, call_private, fmt,
&args);
/*
* Disable a marker and its probe callback.
- * Note: only after a synchronize_sched() issued after setting elem->call to the
- * empty function insures that the original callback is not used anymore. This
- * insured by preemption disabling around the call site.
+ * Note: only waiting an RCU period after setting elem->call to the empty
+ * function insures that the original callback is not used anymore. This insured
+ * by preempt_disable around the call site.
*/
static void disable_marker(struct marker *elem)
{
elem->ptype = 0; /* single probe */
/*
* Leave the private data and id there, because removal is racy and
- * should be done only after a synchronize_sched(). These are never used
- * until the next initialization anyway.
+ * should be done only after an RCU period. These are never used until
+ * the next initialization anyway.
*/
}
/*
* Update probes, removing the faulty probes.
- * Issues a synchronize_sched() when no reference to the module passed
- * as parameter is found in the probes so the probe module can be
- * safely unloaded from now on.
*
* Internal callback only changed before the first probe is connected to it.
* Single probe private data can only be changed on 0 -> 1 and 2 -> 1
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
end:
mutex_unlock(&markers_mutex);
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(name); /* Ignore busy error message */
ret = 0;
entry->rcu_pending = 1;
/* write rcu_pending before calling the RCU callback */
smp_wmb();
+#ifdef CONFIG_PREEMPT_RCU
+ synchronize_sched(); /* Until we have the call_rcu_sched() */
+#endif
call_rcu(&entry->rcu, free_old_closure);
remove_marker(entry->name); /* Ignore busy error message */
end:
/* cpu currently holding logbuf_lock */
static volatile unsigned int printk_cpu = UINT_MAX;
+/*
+ * Can we actually use the console at this time on this cpu?
+ *
+ * Console drivers may assume that per-cpu resources have
+ * been allocated. So unless they're explicitly marked as
+ * being able to cope (CON_ANYTIME) don't call them until
+ * this CPU is officially up.
+ */
+static inline int can_use_console(unsigned int cpu)
+{
+ return cpu_online(cpu) || have_callable_console();
+}
+
+/*
+ * Try to get console ownership to actually show the kernel
+ * messages from a 'printk'. Return true (and with the
+ * console_semaphore held, and 'console_locked' set) if it
+ * is successful, false otherwise.
+ *
+ * This gets called with the 'logbuf_lock' spinlock held and
+ * interrupts disabled. It should return with 'lockbuf_lock'
+ * released but interrupts still disabled.
+ */
+static int acquire_console_semaphore_for_printk(unsigned int cpu)
+{
+ int retval = 0;
+
+ if (can_use_console(cpu))
+ retval = !try_acquire_console_sem();
+ printk_cpu = UINT_MAX;
+ spin_unlock(&logbuf_lock);
+ return retval;
+}
+
const char printk_recursion_bug_msg [] =
KERN_CRIT "BUG: recent printk recursion!\n";
static int printk_recursion_bug;
log_level_unknown = 1;
}
- if (!down_trylock(&console_sem)) {
- /*
- * We own the drivers. We can drop the spinlock and
- * let release_console_sem() print the text, maybe ...
- */
- console_locked = 1;
- printk_cpu = UINT_MAX;
- spin_unlock(&logbuf_lock);
+ /*
+ * Try to acquire and then immediately release the
+ * console semaphore. The release will do all the
+ * actual magic (print out buffers, wake up klogd,
+ * etc).
+ *
+ * The acquire_console_semaphore_for_printk() function
+ * will release 'logbuf_lock' regardless of whether it
+ * actually gets the semaphore or not.
+ */
+ if (acquire_console_semaphore_for_printk(this_cpu))
+ release_console_sem();
- /*
- * Console drivers may assume that per-cpu resources have
- * been allocated. So unless they're explicitly marked as
- * being able to cope (CON_ANYTIME) don't call them until
- * this CPU is officially up.
- */
- if (cpu_online(smp_processor_id()) || have_callable_console()) {
- console_may_schedule = 0;
- release_console_sem();
- } else {
- /* Release by hand to avoid flushing the buffer. */
- console_locked = 0;
- up(&console_sem);
- }
- lockdep_on();
- raw_local_irq_restore(flags);
- } else {
- /*
- * Someone else owns the drivers. We drop the spinlock, which
- * allows the semaphore holder to proceed and to call the
- * console drivers with the output which we just produced.
- */
- printk_cpu = UINT_MAX;
- spin_unlock(&logbuf_lock);
- lockdep_on();
+ lockdep_on();
out_restore_irqs:
- raw_local_irq_restore(flags);
- }
+ raw_local_irq_restore(flags);
preempt_enable();
return printed_len;
kref_get(&buf->kref);
filp->private_data = buf;
- return 0;
+ return nonseekable_open(inode, filp);
}
/**
.get = generic_pipe_buf_get,
};
+static void relay_page_release(struct splice_pipe_desc *spd, unsigned int i)
+{
+}
+
/*
* subbuf_splice_actor - splice up to one subbuf's worth of data
*/
.partial = partial,
.flags = flags,
.ops = &relay_pipe_buf_ops,
+ .spd_release = relay_page_release,
};
if (rbuf->subbufs_produced == rbuf->subbufs_consumed)
resched_task(cpu_curr(cpu));
spin_unlock_irqrestore(&rq->lock, flags);
}
+
+#ifdef CONFIG_NO_HZ
+/*
+ * When add_timer_on() enqueues a timer into the timer wheel of an
+ * idle CPU then this timer might expire before the next timer event
+ * which is scheduled to wake up that CPU. In case of a completely
+ * idle system the next event might even be infinite time into the
+ * future. wake_up_idle_cpu() ensures that the CPU is woken up and
+ * leaves the inner idle loop so the newly added timer is taken into
+ * account when the CPU goes back to idle and evaluates the timer
+ * wheel for the next timer event.
+ */
+void wake_up_idle_cpu(int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+
+ if (cpu == smp_processor_id())
+ return;
+
+ /*
+ * This is safe, as this function is called with the timer
+ * wheel base lock of (cpu) held. When the CPU is on the way
+ * to idle and has not yet set rq->curr to idle then it will
+ * be serialized on the timer wheel base lock and take the new
+ * timer into account automatically.
+ */
+ if (rq->curr != rq->idle)
+ return;
+
+ /*
+ * We can set TIF_RESCHED on the idle task of the other CPU
+ * lockless. The worst case is that the other CPU runs the
+ * idle task through an additional NOOP schedule()
+ */
+ set_tsk_thread_flag(rq->idle, TIF_NEED_RESCHED);
+
+ /* NEED_RESCHED must be visible before we test polling */
+ smp_mb();
+ if (!tsk_is_polling(rq->idle))
+ smp_send_reschedule(cpu);
+}
+#endif
+
#else
static void __resched_task(struct task_struct *p, int tif_bit)
{
if (watchdog)
del_timer(&watchdog_timer);
watchdog = cs;
- init_timer_deferrable(&watchdog_timer);
+ init_timer(&watchdog_timer);
watchdog_timer.function = clocksource_watchdog;
/* Reset watchdog cycles */
tick_clock_notify();
+ /*
+ * We're holding xtime lock and waking up klogd would deadlock
+ * us on enqueue. So no printing!
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
clock->name);
+ */
}
#else
static inline void change_clocksource(void) { }
spin_lock_irqsave(&base->lock, flags);
timer_set_base(timer, base);
internal_add_timer(base, timer);
+ /*
+ * Check whether the other CPU is idle and needs to be
+ * triggered to reevaluate the timer wheel when nohz is
+ * active. We are protected against the other CPU fiddling
+ * with the timer by holding the timer base lock. This also
+ * makes sure that a CPU on the way to idle can not evaluate
+ * the timer wheel.
+ */
+ wake_up_idle_cpu(cpu);
spin_unlock_irqrestore(&base->lock, flags);
}
-
/**
* mod_timer - modify a timer's timeout
* @timer: the timer to be modified
{
long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, user, group);
return ret;
}
{
long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, filename, user, group);
return ret;
}
{
long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, fd, user, group);
return ret;
}
{
long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, rgid, egid);
return ret;
}
{
long ret = sys_setgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, gid);
return ret;
}
{
long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(2, ret, ruid, euid);
return ret;
}
{
long ret = sys_setuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, uid);
return ret;
}
long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
low2highuid(suid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, ruid, euid, suid);
return ret;
}
long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
low2highgid(sgid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(3, ret, rgid, egid, sgid);
return ret;
}
{
long ret = sys_setfsuid(low2highuid(uid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, uid);
return ret;
}
{
long ret = sys_setfsgid(low2highgid(gid));
/* avoid REGPARM breakage on x86: */
- prevent_tail_call(ret);
+ asmlinkage_protect(1, ret, gid);
return ret;
}
config CHECK_SIGNATURE
bool
+config HAVE_LMB
+ boolean
+
endmenu
lib-$(CONFIG_GENERIC_BUG) += bug.o
+obj-$(CONFIG_HAVE_LMB) += lmb.o
+
hostprogs-y := gen_crc32table
clean-files := crc32table.h
* */
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
{
- unsigned long start = pci_resource_start(dev, bar);
+ resource_size_t start = pci_resource_start(dev, bar);
unsigned long len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
enum kobject_action action;
int ret = -EINVAL;
- if (count && buf[count-1] == '\n')
+ if (count && (buf[count-1] == '\n' || buf[count-1] == '\0'))
count--;
if (!count)
--- /dev/null
+/*
+ * Procedures for maintaining information about logical memory blocks.
+ *
+ * Peter Bergner, IBM Corp. June 2001.
+ * Copyright (C) 2001 Peter Bergner.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/lmb.h>
+
+#define LMB_ALLOC_ANYWHERE 0
+
+struct lmb lmb;
+
+void lmb_dump_all(void)
+{
+#ifdef DEBUG
+ unsigned long i;
+
+ pr_debug("lmb_dump_all:\n");
+ pr_debug(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
+ pr_debug(" memory.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
+ for (i=0; i < lmb.memory.cnt ;i++) {
+ pr_debug(" memory.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.memory.region[i].base);
+ pr_debug(" .size = 0x%llx\n",
+ (unsigned long long)lmb.memory.region[i].size);
+ }
+
+ pr_debug(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
+ pr_debug(" reserved.size = 0x%lx\n", lmb.reserved.size);
+ for (i=0; i < lmb.reserved.cnt ;i++) {
+ pr_debug(" reserved.region[0x%x].base = 0x%llx\n",
+ i, (unsigned long long)lmb.reserved.region[i].base);
+ pr_debug(" .size = 0x%llx\n",
+ (unsigned long long)lmb.reserved.region[i].size);
+ }
+#endif /* DEBUG */
+}
+
+static unsigned long __init lmb_addrs_overlap(u64 base1, u64 size1,
+ u64 base2, u64 size2)
+{
+ return ((base1 < (base2 + size2)) && (base2 < (base1 + size1)));
+}
+
+static long __init lmb_addrs_adjacent(u64 base1, u64 size1,
+ u64 base2, u64 size2)
+{
+ if (base2 == base1 + size1)
+ return 1;
+ else if (base1 == base2 + size2)
+ return -1;
+
+ return 0;
+}
+
+static long __init lmb_regions_adjacent(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ u64 base1 = rgn->region[r1].base;
+ u64 size1 = rgn->region[r1].size;
+ u64 base2 = rgn->region[r2].base;
+ u64 size2 = rgn->region[r2].size;
+
+ return lmb_addrs_adjacent(base1, size1, base2, size2);
+}
+
+static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
+{
+ unsigned long i;
+
+ for (i = r; i < rgn->cnt - 1; i++) {
+ rgn->region[i].base = rgn->region[i + 1].base;
+ rgn->region[i].size = rgn->region[i + 1].size;
+ }
+ rgn->cnt--;
+}
+
+/* Assumption: base addr of region 1 < base addr of region 2 */
+static void __init lmb_coalesce_regions(struct lmb_region *rgn,
+ unsigned long r1, unsigned long r2)
+{
+ rgn->region[r1].size += rgn->region[r2].size;
+ lmb_remove_region(rgn, r2);
+}
+
+void __init lmb_init(void)
+{
+ /* Create a dummy zero size LMB which will get coalesced away later.
+ * This simplifies the lmb_add() code below...
+ */
+ lmb.memory.region[0].base = 0;
+ lmb.memory.region[0].size = 0;
+ lmb.memory.cnt = 1;
+
+ /* Ditto. */
+ lmb.reserved.region[0].base = 0;
+ lmb.reserved.region[0].size = 0;
+ lmb.reserved.cnt = 1;
+}
+
+void __init lmb_analyze(void)
+{
+ int i;
+
+ lmb.memory.size = 0;
+
+ for (i = 0; i < lmb.memory.cnt; i++)
+ lmb.memory.size += lmb.memory.region[i].size;
+}
+
+static long __init lmb_add_region(struct lmb_region *rgn, u64 base, u64 size)
+{
+ unsigned long coalesced = 0;
+ long adjacent, i;
+
+ if ((rgn->cnt == 1) && (rgn->region[0].size == 0)) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ return 0;
+ }
+
+ /* First try and coalesce this LMB with another. */
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+
+ if ((rgnbase == base) && (rgnsize == size))
+ /* Already have this region, so we're done */
+ return 0;
+
+ adjacent = lmb_addrs_adjacent(base, size, rgnbase, rgnsize);
+ if (adjacent > 0) {
+ rgn->region[i].base -= size;
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ } else if (adjacent < 0) {
+ rgn->region[i].size += size;
+ coalesced++;
+ break;
+ }
+ }
+
+ if ((i < rgn->cnt - 1) && lmb_regions_adjacent(rgn, i, i+1)) {
+ lmb_coalesce_regions(rgn, i, i+1);
+ coalesced++;
+ }
+
+ if (coalesced)
+ return coalesced;
+ if (rgn->cnt >= MAX_LMB_REGIONS)
+ return -1;
+
+ /* Couldn't coalesce the LMB, so add it to the sorted table. */
+ for (i = rgn->cnt - 1; i >= 0; i--) {
+ if (base < rgn->region[i].base) {
+ rgn->region[i+1].base = rgn->region[i].base;
+ rgn->region[i+1].size = rgn->region[i].size;
+ } else {
+ rgn->region[i+1].base = base;
+ rgn->region[i+1].size = size;
+ break;
+ }
+ }
+
+ if (base < rgn->region[0].base) {
+ rgn->region[0].base = base;
+ rgn->region[0].size = size;
+ }
+ rgn->cnt++;
+
+ return 0;
+}
+
+long __init lmb_add(u64 base, u64 size)
+{
+ struct lmb_region *_rgn = &lmb.memory;
+
+ /* On pSeries LPAR systems, the first LMB is our RMO region. */
+ if (base == 0)
+ lmb.rmo_size = size;
+
+ return lmb_add_region(_rgn, base, size);
+
+}
+
+long __init lmb_reserve(u64 base, u64 size)
+{
+ struct lmb_region *_rgn = &lmb.reserved;
+
+ BUG_ON(0 == size);
+
+ return lmb_add_region(_rgn, base, size);
+}
+
+long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
+{
+ unsigned long i;
+
+ for (i = 0; i < rgn->cnt; i++) {
+ u64 rgnbase = rgn->region[i].base;
+ u64 rgnsize = rgn->region[i].size;
+ if (lmb_addrs_overlap(base, size, rgnbase, rgnsize))
+ break;
+ }
+
+ return (i < rgn->cnt) ? i : -1;
+}
+
+static u64 lmb_align_down(u64 addr, u64 size)
+{
+ return addr & ~(size - 1);
+}
+
+static u64 lmb_align_up(u64 addr, u64 size)
+{
+ return (addr + (size - 1)) & ~(size - 1);
+}
+
+static u64 __init lmb_alloc_nid_unreserved(u64 start, u64 end,
+ u64 size, u64 align)
+{
+ u64 base, res_base;
+ long j;
+
+ base = lmb_align_down((end - size), align);
+ while (start <= base) {
+ j = lmb_overlaps_region(&lmb.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (lmb_add_region(&lmb.reserved, base,
+ lmb_align_up(size, align)) < 0)
+ base = ~(u64)0;
+ return base;
+ }
+ res_base = lmb.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = lmb_align_down(res_base - size, align);
+ }
+
+ return ~(u64)0;
+}
+
+static u64 __init lmb_alloc_nid_region(struct lmb_property *mp,
+ u64 (*nid_range)(u64, u64, int *),
+ u64 size, u64 align, int nid)
+{
+ u64 start, end;
+
+ start = mp->base;
+ end = start + mp->size;
+
+ start = lmb_align_up(start, align);
+ while (start < end) {
+ u64 this_end;
+ int this_nid;
+
+ this_end = nid_range(start, end, &this_nid);
+ if (this_nid == nid) {
+ u64 ret = lmb_alloc_nid_unreserved(start, this_end,
+ size, align);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+ start = this_end;
+ }
+
+ return ~(u64)0;
+}
+
+u64 __init lmb_alloc_nid(u64 size, u64 align, int nid,
+ u64 (*nid_range)(u64 start, u64 end, int *nid))
+{
+ struct lmb_region *mem = &lmb.memory;
+ int i;
+
+ for (i = 0; i < mem->cnt; i++) {
+ u64 ret = lmb_alloc_nid_region(&mem->region[i],
+ nid_range,
+ size, align, nid);
+ if (ret != ~(u64)0)
+ return ret;
+ }
+
+ return lmb_alloc(size, align);
+}
+
+u64 __init lmb_alloc(u64 size, u64 align)
+{
+ return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
+}
+
+u64 __init lmb_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ u64 alloc;
+
+ alloc = __lmb_alloc_base(size, align, max_addr);
+
+ if (alloc == 0)
+ panic("ERROR: Failed to allocate 0x%llx bytes below 0x%llx.\n",
+ (unsigned long long) size, (unsigned long long) max_addr);
+
+ return alloc;
+}
+
+u64 __init __lmb_alloc_base(u64 size, u64 align, u64 max_addr)
+{
+ long i, j;
+ u64 base = 0;
+ u64 res_base;
+
+ BUG_ON(0 == size);
+
+ /* On some platforms, make sure we allocate lowmem */
+ /* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ max_addr = LMB_REAL_LIMIT;
+
+ for (i = lmb.memory.cnt - 1; i >= 0; i--) {
+ u64 lmbbase = lmb.memory.region[i].base;
+ u64 lmbsize = lmb.memory.region[i].size;
+
+ if (lmbsize < size)
+ continue;
+ if (max_addr == LMB_ALLOC_ANYWHERE)
+ base = lmb_align_down(lmbbase + lmbsize - size, align);
+ else if (lmbbase < max_addr) {
+ base = min(lmbbase + lmbsize, max_addr);
+ base = lmb_align_down(base - size, align);
+ } else
+ continue;
+
+ while (base && lmbbase <= base) {
+ j = lmb_overlaps_region(&lmb.reserved, base, size);
+ if (j < 0) {
+ /* this area isn't reserved, take it */
+ if (lmb_add_region(&lmb.reserved, base,
+ size) < 0)
+ return 0;
+ return base;
+ }
+ res_base = lmb.reserved.region[j].base;
+ if (res_base < size)
+ break;
+ base = lmb_align_down(res_base - size, align);
+ }
+ }
+ return 0;
+}
+
+/* You must call lmb_analyze() before this. */
+u64 __init lmb_phys_mem_size(void)
+{
+ return lmb.memory.size;
+}
+
+u64 __init lmb_end_of_DRAM(void)
+{
+ int idx = lmb.memory.cnt - 1;
+
+ return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
+}
+
+/* You must call lmb_analyze() after this. */
+void __init lmb_enforce_memory_limit(u64 memory_limit)
+{
+ unsigned long i;
+ u64 limit;
+ struct lmb_property *p;
+
+ if (!memory_limit)
+ return;
+
+ /* Truncate the lmb regions to satisfy the memory limit. */
+ limit = memory_limit;
+ for (i = 0; i < lmb.memory.cnt; i++) {
+ if (limit > lmb.memory.region[i].size) {
+ limit -= lmb.memory.region[i].size;
+ continue;
+ }
+
+ lmb.memory.region[i].size = limit;
+ lmb.memory.cnt = i + 1;
+ break;
+ }
+
+ if (lmb.memory.region[0].size < lmb.rmo_size)
+ lmb.rmo_size = lmb.memory.region[0].size;
+
+ /* And truncate any reserves above the limit also. */
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ p = &lmb.reserved.region[i];
+
+ if (p->base > memory_limit)
+ p->size = 0;
+ else if ((p->base + p->size) > memory_limit)
+ p->size = memory_limit - p->base;
+
+ if (p->size == 0) {
+ lmb_remove_region(&lmb.reserved, i);
+ i--;
+ }
+ }
+}
+
+int __init lmb_is_reserved(u64 addr)
+{
+ int i;
+
+ for (i = 0; i < lmb.reserved.cnt; i++) {
+ u64 upper = lmb.reserved.region[i].base +
+ lmb.reserved.region[i].size - 1;
+ if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
+ return 1;
+ }
+ return 0;
+}
t += 7 + *ip++;
}
m_pos -= le16_to_cpu(get_unaligned(
- (const unsigned short *)ip) >> 2);
+ (const unsigned short *)ip)) >> 2;
ip += 2;
if (m_pos == op)
goto eof_found;
* @seed: seed value
*
* Add some additional seeding to the random32() pool.
- * Note: this pool is per cpu so it only affects current CPU.
*/
void srandom32(u32 entropy)
{
- struct rnd_state *state = &get_cpu_var(net_rand_state);
- __set_random32(state, state->s1 ^ entropy);
- put_cpu_var(state);
+ int i;
+ /*
+ * No locking on the CPUs, but then somewhat random results are, well,
+ * expected.
+ */
+ for_each_possible_cpu (i) {
+ struct rnd_state *state = &per_cpu(net_rand_state, i);
+ __set_random32(state, state->s1 ^ entropy);
+ }
}
EXPORT_SYMBOL(srandom32);
BUG_ON(!size);
BUG_ON(PFN_DOWN(addr) >= bdata->node_low_pfn);
BUG_ON(PFN_UP(addr + size) > bdata->node_low_pfn);
+ BUG_ON(addr < bdata->node_boot_start);
sidx = PFN_DOWN(addr - bdata->node_boot_start);
eidx = PFN_UP(addr + size - bdata->node_boot_start);
unsigned long sidx, eidx;
unsigned long i;
+ BUG_ON(!size);
+
+ /* out range */
+ if (addr + size < bdata->node_boot_start ||
+ PFN_DOWN(addr) > bdata->node_low_pfn)
+ return;
/*
* round down end of usable mem, partially free pages are
* considered reserved.
*/
- BUG_ON(!size);
- BUG_ON(PFN_DOWN(addr + size) > bdata->node_low_pfn);
- if (addr < bdata->last_success)
+ if (addr >= bdata->node_boot_start && addr < bdata->last_success)
bdata->last_success = addr;
/*
- * Round up the beginning of the address.
+ * Round up to index to the range.
*/
- sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+ if (PFN_UP(addr) > PFN_DOWN(bdata->node_boot_start))
+ sidx = PFN_UP(addr) - PFN_DOWN(bdata->node_boot_start);
+ else
+ sidx = 0;
+
eidx = PFN_DOWN(addr + size - bdata->node_boot_start);
+ if (eidx > bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start))
+ eidx = bdata->node_low_pfn - PFN_DOWN(bdata->node_boot_start);
for (i = sidx; i < eidx; i++) {
if (unlikely(!test_and_clear_bit(i, bdata->node_bootmem_map)))
void __init free_bootmem(unsigned long addr, unsigned long size)
{
- free_bootmem_core(NODE_DATA(0)->bdata, addr, size);
+ bootmem_data_t *bdata;
+ list_for_each_entry(bdata, &bdata_list, list)
+ free_bootmem_core(bdata, addr, size);
}
unsigned long __init free_all_bootmem(void)
struct page *page;
unsigned long nr_pages;
+ /*
+ * We want to release as many surplus pages as possible, spread
+ * evenly across all nodes. Iterate across all nodes until we
+ * can no longer free unreserved surplus pages. This occurs when
+ * the nodes with surplus pages have no free pages.
+ */
+ unsigned long remaining_iterations = num_online_nodes();
+
/* Uncommit the reservation */
resv_huge_pages -= unused_resv_pages;
nr_pages = min(unused_resv_pages, surplus_huge_pages);
- while (nr_pages) {
+ while (remaining_iterations-- && nr_pages) {
nid = next_node(nid, node_online_map);
if (nid == MAX_NUMNODES)
nid = first_node(node_online_map);
surplus_huge_pages--;
surplus_huge_pages_node[nid]--;
nr_pages--;
+ remaining_iterations = num_online_nodes();
}
}
}
{
return sprintf(buf,
"Node %d HugePages_Total: %5u\n"
- "Node %d HugePages_Free: %5u\n",
+ "Node %d HugePages_Free: %5u\n"
+ "Node %d HugePages_Surp: %5u\n",
nid, nr_huge_pages_node[nid],
- nid, free_huge_pages_node[nid]);
+ nid, free_huge_pages_node[nid],
+ nid, surplus_huge_pages_node[nid]);
}
/* Return the number pages of memory we physically have, in PAGE_SIZE units. */
unsigned long nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
struct mem_cgroup_per_zone *mz;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
/*
* Should page_cgroup's go to their own slab?
* One could optimize the performance of the charging routine
struct mem_cgroup_per_zone *mz;
unsigned long flags;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
/*
* Check if our page_cgroup is valid
*/
{
struct page_cgroup *pc;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
lock_page_cgroup(page);
pc = page_get_page_cgroup(page);
if (pc)
int ret = -EBUSY;
int node, zid;
+ if (mem_cgroup_subsys.disabled)
+ return 0;
+
css_get(&mem->css);
/*
* page reclaim code (kswapd etc..) will move pages between
{
struct mem_cgroup_per_node *pn;
struct mem_cgroup_per_zone *mz;
- int zone;
+ int zone, tmp = node;
/*
* This routine is called against possible nodes.
* But it's BUG to call kmalloc() against offline node.
* never be onlined. It's better to use memory hotplug callback
* function.
*/
- if (node_state(node, N_HIGH_MEMORY))
- pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, node);
- else
- pn = kmalloc(sizeof(*pn), GFP_KERNEL);
+ if (!node_state(node, N_NORMAL_MEMORY))
+ tmp = -1;
+ pn = kmalloc_node(sizeof(*pn), GFP_KERNEL, tmp);
if (!pn)
return 1;
static int mem_cgroup_populate(struct cgroup_subsys *ss,
struct cgroup *cont)
{
+ if (mem_cgroup_subsys.disabled)
+ return 0;
return cgroup_add_files(cont, ss, mem_cgroup_files,
ARRAY_SIZE(mem_cgroup_files));
}
struct mm_struct *mm;
struct mem_cgroup *mem, *old_mem;
+ if (mem_cgroup_subsys.disabled)
+ return;
+
mm = get_task_mm(p);
if (mm == NULL)
return;
list_add(&cache_cache.next, &cache_chain);
cache_cache.colour_off = cache_line_size();
cache_cache.array[smp_processor_id()] = &initarray_cache.cache;
- cache_cache.nodelists[node] = &initkmem_list3[CACHE_CACHE];
+ cache_cache.nodelists[node] = &initkmem_list3[CACHE_CACHE + node];
/*
* struct kmem_cache size depends on nr_node_ids, which
int nid;
for_each_online_node(nid) {
- init_list(&cache_cache, &initkmem_list3[CACHE_CACHE], nid);
+ init_list(&cache_cache, &initkmem_list3[CACHE_CACHE + nid], nid);
init_list(malloc_sizes[INDEX_AC].cs_cachep,
&initkmem_list3[SIZE_AC + nid], nid);
void **object;
struct page *new;
+ /* We handle __GFP_ZERO in the caller */
+ gfpflags &= ~__GFP_ZERO;
+
if (!c->page)
goto new_slab;
}
EXPORT_SYMBOL(kfree);
+#if defined(CONFIG_SLUB_DEBUG) || defined(CONFIG_SLABINFO)
static unsigned long count_partial(struct kmem_cache_node *n)
{
unsigned long flags;
spin_unlock_irqrestore(&n->list_lock, flags);
return x;
}
+#endif
/*
* kmem_cache_shrink removes empty slabs from the partial lists and sorts
pte_t entry;
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
entry = pfn_pte(__pa(p) >> PAGE_SHIFT, PAGE_KERNEL);
set_pte_at(&init_mm, addr, pte, entry);
}
if (pmd_none(*pmd)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pmd_populate_kernel(&init_mm, pmd, p);
}
return pmd;
if (pud_none(*pud)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pud_populate(&init_mm, pud, p);
}
return pud;
if (pgd_none(*pgd)) {
void *p = vmemmap_alloc_block(PAGE_SIZE, node);
if (!p)
- return 0;
+ return NULL;
pgd_populate(&init_mm, pgd, p);
}
return pgd;
close_file:
put_filp(file);
+ return ERR_PTR(error);
+
put_dentry:
dput(dentry);
put_memory:
int order;
- /*
- * Pages that have (or should have) IO pending. If we run into
- * a lot of these, we're better off waiting a little for IO to
- * finish rather than scanning more pages in the VM.
- */
- int nr_io_pages;
-
/* Which cgroup do we reclaim from */
struct mem_cgroup *mem_cgroup;
*/
if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs)
wait_on_page_writeback(page);
- else {
- sc->nr_io_pages++;
+ else
goto keep_locked;
- }
}
referenced = page_referenced(page, 1, sc->mem_cgroup);
if (PageDirty(page)) {
if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && referenced)
goto keep_locked;
- if (!may_enter_fs) {
- sc->nr_io_pages++;
+ if (!may_enter_fs)
goto keep_locked;
- }
if (!sc->may_writepage)
goto keep_locked;
case PAGE_ACTIVATE:
goto activate_locked;
case PAGE_SUCCESS:
- if (PageWriteback(page) || PageDirty(page)) {
- sc->nr_io_pages++;
+ if (PageWriteback(page) || PageDirty(page))
goto keep;
- }
/*
* A synchronous write - probably a ramdisk. Go
* ahead and try to reclaim the page.
for (priority = DEF_PRIORITY; priority >= 0; priority--) {
sc->nr_scanned = 0;
- sc->nr_io_pages = 0;
if (!priority)
disable_swap_token();
nr_reclaimed += shrink_zones(priority, zones, sc);
}
/* Take a nap, wait for some writeback to complete */
- if (sc->nr_scanned && priority < DEF_PRIORITY - 2 &&
- sc->nr_io_pages > sc->swap_cluster_max)
+ if (sc->nr_scanned && priority < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ/10);
}
/* top priority shrink_caches still had more to do? don't OOM, then */
if (!priority)
disable_swap_token();
- sc.nr_io_pages = 0;
all_zones_ok = 1;
/*
* OK, kswapd is getting into trouble. Take a nap, then take
* another pass across the zones.
*/
- if (total_scanned && priority < DEF_PRIORITY - 2 &&
- sc.nr_io_pages > sc.swap_cluster_max)
+ if (total_scanned && priority < DEF_PRIORITY - 2)
congestion_wait(WRITE, HZ/10);
/*
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void __vlan_device_event(struct net_device *dev, unsigned long event)
+{
+ switch (event) {
+ case NETDEV_CHANGENAME:
+ vlan_proc_rem_dev(dev);
+ if (vlan_proc_add_dev(dev) < 0)
+ pr_warning("8021q: failed to change proc name for %s\n",
+ dev->name);
+ break;
+ }
+}
+
static int vlan_device_event(struct notifier_block *unused, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
- struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+ struct vlan_group *grp;
int i, flgs;
struct net_device *vlandev;
if (dev->nd_net != &init_net)
return NOTIFY_DONE;
+ if (is_vlan_dev(dev)) {
+ __vlan_device_event(dev, event);
+ goto out;
+ }
+
+ grp = __vlan_find_group(dev->ifindex);
if (!grp)
goto out;
extern struct rtnl_link_ops vlan_link_ops;
+static inline int is_vlan_dev(struct net_device *dev)
+{
+ return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
#endif /* !(__BEN_VLAN_802_1Q_INC__) */
int subclass = 0;
/* IFF_BROADCAST|IFF_MULTICAST; ??? */
- dev->flags = real_dev->flags & ~IFF_UP;
+ dev->flags = real_dev->flags & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI);
dev->iflink = real_dev->ifindex;
dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
(1<<__LINK_STATE_DORMANT))) |
return 0;
}
+static void vlan_dev_uninit(struct net_device *dev)
+{
+ struct vlan_priority_tci_mapping *pm;
+ struct vlan_dev_info *vlan = vlan_dev_info(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
+ while ((pm = vlan->egress_priority_map[i]) != NULL) {
+ vlan->egress_priority_map[i] = pm->next;
+ kfree(pm);
+ }
+ }
+}
+
void vlan_setup(struct net_device *dev)
{
ether_setup(dev);
dev->change_mtu = vlan_dev_change_mtu;
dev->init = vlan_dev_init;
+ dev->uninit = vlan_dev_uninit;
dev->open = vlan_dev_open;
dev->stop = vlan_dev_stop;
dev->set_mac_address = vlan_dev_set_mac_address;
* The following few functions build the content of /proc/net/vlan/config
*/
-static inline int is_vlan_dev(struct net_device *dev)
-{
- return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
/* start read of /proc/net/vlan/config */
static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(dev_base_lock)
static void p9_mux_flush_cb(struct p9_req *freq, void *a)
{
- p9_conn_req_callback cb;
int tag;
struct p9_conn *m;
struct p9_req *req, *rreq, *rptr;
freq->tcall->params.tflush.oldtag);
spin_lock(&m->lock);
- cb = NULL;
tag = freq->tcall->params.tflush.oldtag;
req = NULL;
list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
v9fs_register_trans(&p9_unix_trans);
v9fs_register_trans(&p9_fd_trans);
- return 1;
+ return 0;
}
module_init(p9_trans_fd_init);
};
#endif
+static void atm_clip_exit_noproc(void);
+
static int __init atm_clip_init(void)
{
neigh_table_init_no_netlink(&clip_tbl);
struct proc_dir_entry *p;
p = proc_create("arp", S_IRUGO, atm_proc_root, &arp_seq_fops);
+ if (!p) {
+ printk(KERN_ERR "Unable to initialize "
+ "/proc/net/atm/arp\n");
+ atm_clip_exit_noproc();
+ return -ENOMEM;
+ }
}
#endif
return 0;
}
-static void __exit atm_clip_exit(void)
+static void atm_clip_exit_noproc(void)
{
struct net_device *dev, *next;
- remove_proc_entry("arp", atm_proc_root);
-
unregister_inetaddr_notifier(&clip_inet_notifier);
unregister_netdevice_notifier(&clip_dev_notifier);
clip_tbl_hook = NULL;
}
+static void __exit atm_clip_exit(void)
+{
+ remove_proc_entry("arp", atm_proc_root);
+
+ atm_clip_exit_noproc();
+}
+
module_init(atm_clip_init);
module_exit(atm_clip_exit);
MODULE_AUTHOR("Werner Almesberger");
char buf[300];
int i = 0;
#endif /* DUMP_PACKETS >0 */
- DECLARE_MAC_BUF(mac);
pr_debug("lec_start_xmit called\n");
if (!priv->lecd) {
if (entry && (entry->tx_wait.qlen < LEC_UNRES_QUE_LEN)) {
pr_debug("%s:lec_start_xmit: queuing packet, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
skb_queue_tail(&entry->tx_wait, skb);
} else {
pr_debug
("%s:lec_start_xmit: tx queue full or no arp entry, dropping, ",
dev->name);
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
priv->stats.tx_dropped++;
dev_kfree_skb(skb);
}
while (entry && (skb2 = skb_dequeue(&entry->tx_wait))) {
pr_debug("lec.c: emptying tx queue, ");
- pr_debug("MAC address %s\n",
- print_mac(mac, lec_h->h_dest));
+ pr_debug("MAC address " MAC_FMT "\n",
+ lec_h->h_dest[0], lec_h->h_dest[1],
+ lec_h->h_dest[2], lec_h->h_dest[3],
+ lec_h->h_dest[4], lec_h->h_dest[5]);
lec_send(vcc, skb2, priv);
}
struct lec_arp_table *entry;
int i;
char *tmp; /* FIXME */
- DECLARE_MAC_BUF(mac);
atomic_sub(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
mesg = (struct atmlec_msg *)skb->data;
struct net_bridge_fdb_entry *f;
pr_debug
- ("%s: bridge zeppelin asks about %s\n",
+ ("%s: bridge zeppelin asks about " MAC_FMT "\n",
dev->name,
- print_mac(mac, mesg->content.proxy.mac_addr));
+ mesg->content.proxy.mac_addr[0],
+ mesg->content.proxy.mac_addr[1],
+ mesg->content.proxy.mac_addr[2],
+ mesg->content.proxy.mac_addr[3],
+ mesg->content.proxy.mac_addr[4],
+ mesg->content.proxy.mac_addr[5]);
if (br_fdb_get_hook == NULL || dev->br_port == NULL)
break;
struct proc_dir_entry *p;
p = proc_create("lec", S_IRUGO, atm_proc_root, &lec_seq_fops);
+ if (!p) {
+ printk(KERN_ERR "Unable to initialize /proc/net/atm/lec\n");
+ return -ENOMEM;
+ }
#endif
register_atm_ioctl(&lane_ioctl_ops);
Routes to a device being taken down might be deleted by ax25_rt_device_down
but added by somebody else before the device has been deleted fully.
-Massive amounts of lock_kernel / unlock_kernel are just a temporary solution to
-get around the removal of SOCKOPS_WRAP. A serious locking strategy has to be
-implemented.
-
The ax25_rt_find_route synopsys is pervert but I somehow had to deal with
the race caused by the static variable in it's previous implementation.
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+
+static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
+static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
+static const char *bt_key_strings[BT_MAX_PROTO] = {
+ "sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
+
+static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+ "slock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "slock-AF_BLUETOOTH-BTPROTO_HCI",
+ "slock-AF_BLUETOOTH-BTPROTO_SCO",
+ "slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "slock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "slock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "slock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
static DEFINE_RWLOCK(bt_proto_lock);
int bt_sock_register(int proto, struct net_proto_family *ops)
}
EXPORT_SYMBOL(bt_sock_unregister);
+static void bt_reclassify_sock_lock(struct socket *sock, int proto)
+{
+ struct sock *sk = sock->sk;
+
+ if (!sk)
+ return;
+ BUG_ON(sock_owned_by_user(sk));
+
+ sock_lock_init_class_and_name(sk,
+ bt_slock_key_strings[proto],
+ &bt_slock_key[proto],
+ bt_key_strings[proto],
+ &bt_lock_key[proto]);
+}
+
static int bt_sock_create(struct net *net, struct socket *sock, int proto)
{
int err;
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto);
+ bt_reclassify_sock_lock(sock, proto);
module_put(bt_proto[proto]->owner);
}
};
static struct bt_sock_list hci_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
};
/* Send frame to RAW socket */
static const struct proto_ops l2cap_sock_ops;
static struct bt_sock_list l2cap_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
};
static void __l2cap_sock_close(struct sock *sk, int reason);
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- d->state_change(d, err);
rfcomm_dlc_unlock(d);
+ d->state_change(d, err);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
static const struct proto_ops rfcomm_sock_ops;
static struct bt_sock_list rfcomm_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
};
static void rfcomm_sock_close(struct sock *sk);
return;
rfcomm_dev_del(dev);
- /* We have to drop DLC lock here, otherwise
- rfcomm_dev_put() will dead lock if it's
- the last reference. */
- rfcomm_dlc_unlock(dlc);
rfcomm_dev_put(dev);
- rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
static const struct proto_ops sco_sock_ops;
static struct bt_sock_list sco_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
};
static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);
return -EOPNOTSUPP;
case SIOCADDMULTI:
- if (!dev->set_multicast_list ||
+ if ((!dev->set_multicast_list && !dev->set_rx_mode) ||
ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
return -EINVAL;
if (!netif_device_present(dev))
dev->addr_len, 1);
case SIOCDELMULTI:
- if (!dev->set_multicast_list ||
+ if ((!dev->set_multicast_list && !dev->set_rx_mode) ||
ifr->ifr_hwaddr.sa_family != AF_UNSPEC)
return -EINVAL;
if (!netif_device_present(dev))
goto out;
}
+struct pneigh_entry *__pneigh_lookup(struct neigh_table *tbl,
+ struct net *net, const void *pkey, struct net_device *dev)
+{
+ struct pneigh_entry *n;
+ int key_len = tbl->key_len;
+ u32 hash_val = *(u32 *)(pkey + key_len - 4);
+
+ hash_val ^= (hash_val >> 16);
+ hash_val ^= hash_val >> 8;
+ hash_val ^= hash_val >> 4;
+ hash_val &= PNEIGH_HASHMASK;
+
+ for (n = tbl->phash_buckets[hash_val]; n; n = n->next) {
+ if (!memcmp(n->key, pkey, key_len) &&
+ (n->net == net) &&
+ (n->dev == dev || !n->dev))
+ break;
+ }
+
+ return n;
+}
+
struct pneigh_entry * pneigh_lookup(struct neigh_table *tbl,
struct net *net, const void *pkey,
struct net_device *dev, int creat)
EXPORT_SYMBOL(neigh_update);
EXPORT_SYMBOL(pneigh_enqueue);
EXPORT_SYMBOL(pneigh_lookup);
+EXPORT_SYMBOL_GPL(__pneigh_lookup);
#ifdef CONFIG_ARPD
EXPORT_SYMBOL(neigh_app_ns);
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_mpdu == NULL)
return 0;
res = crypt->ops->decrypt_mpdu(skb, hdrlen, crypt->priv);
atomic_dec(&crypt->refcnt);
if (res < 0) {
- IEEE80211_DEBUG_DROP("decryption failed (SA=%s"
- ") res=%d\n", print_mac(mac, hdr->addr2), res);
+ IEEE80211_DEBUG_DROP("decryption failed (SA=" MAC_FMT
+ ") res=%d\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ res);
if (res == -2)
IEEE80211_DEBUG_DROP("Decryption failed ICV "
"mismatch (key %d)\n",
{
struct ieee80211_hdr_3addr *hdr;
int res, hdrlen;
- DECLARE_MAC_BUF(mac);
if (crypt == NULL || crypt->ops->decrypt_msdu == NULL)
return 0;
atomic_dec(&crypt->refcnt);
if (res < 0) {
printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
- " (SA=%s keyidx=%d)\n",
- ieee->dev->name, print_mac(mac, hdr->addr2), keyidx);
+ " (SA=" MAC_FMT " keyidx=%d)\n",
+ ieee->dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5],
+ keyidx);
return -1;
}
* frames silently instead of filling system log with
* these reports. */
IEEE80211_DEBUG_DROP("Decryption failed (not set)"
- " (SA=%s)\n",
- print_mac(mac, hdr->addr2));
+ " (SA=" MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
ieee->ieee_stats.rx_discards_undecryptable++;
goto rx_dropped;
}
fc & IEEE80211_FCTL_PROTECTED && ieee->host_decrypt &&
(keyidx = hostap_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
- "from %s\n", dev->name,
- print_mac(mac, hdr->addr2));
+ "from " MAC_FMT "\n", dev->name,
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
/* TODO: could inform hostapd about this so that it
* could send auth failure report */
goto rx_dropped;
* configured */
} else {
IEEE80211_DEBUG_DROP("encryption configured, but RX "
- "frame not encrypted (SA=%s"
- ")\n", print_mac(mac, hdr->addr2));
+ "frame not encrypted (SA="
+ MAC_FMT ")\n",
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
}
if (crypt && !(fc & IEEE80211_FCTL_PROTECTED) && !ieee->open_wep &&
!ieee80211_is_eapol_frame(ieee, skb)) {
IEEE80211_DEBUG_DROP("dropped unencrypted RX data "
- "frame from %s"
+ "frame from " MAC_FMT
" (drop_unencrypted=1)\n",
- print_mac(mac, hdr->addr2));
+ hdr->addr2[0], hdr->addr2[1],
+ hdr->addr2[2], hdr->addr2[3],
+ hdr->addr2[4], hdr->addr2[5]);
goto rx_dropped;
}
If unsure, say Y. Note that if you want to use DHCP, a DHCP server
must be operating on your network. Read
- <file:Documentation/nfsroot.txt> for details.
+ <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_BOOTP
bool "IP: BOOTP support"
does BOOTP itself, providing all necessary information on the kernel
command line, you can say N here. If unsure, say Y. Note that if you
want to use BOOTP, a BOOTP server must be operating on your network.
- Read <file:Documentation/nfsroot.txt> for details.
+ Read <file:Documentation/filesystems/nfsroot.txt> for details.
config IP_PNP_RARP
bool "IP: RARP support"
discovered automatically at boot time using the RARP protocol (an
older protocol which is being obsoleted by BOOTP and DHCP), say Y
here. Note that if you want to use RARP, a RARP server must be
- operating on your network. Read <file:Documentation/nfsroot.txt> for
- details.
+ operating on your network. Read
+ <file:Documentation/filesystems/nfsroot.txt> for details.
# not yet ready..
# bool ' IP: ARP support' CONFIG_IP_PNP_ARP
struct scatterlist *asg;
int err = -EINVAL;
- if (!pskb_may_pull(skb, sizeof(*esph)))
+ if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead)))
goto out;
if (elen <= 0)
return rcu_dereference(ret);
}
+/* Same as rcu_assign_pointer
+ * but that macro() assumes that value is a pointer.
+ */
static inline void node_set_parent(struct node *node, struct tnode *ptr)
{
- rcu_assign_pointer(node->parent,
- (unsigned long)ptr | NODE_TYPE(node));
+ smp_wmb();
+ node->parent = (unsigned long)ptr | NODE_TYPE(node);
}
static inline struct node *tnode_get_child(struct tnode *tn, unsigned int i)
}
if (xfrm_decode_session_reverse(skb_in, &fl, AF_INET))
- goto out_unlock;
+ goto relookup_failed;
if (inet_addr_type(net, fl.fl4_src) == RTN_LOCAL)
err = __ip_route_output_key(net, &rt2, &fl);
fl2.fl4_dst = fl.fl4_src;
if (ip_route_output_key(net, &rt2, &fl2))
- goto out_unlock;
+ goto relookup_failed;
/* Ugh! */
odst = skb_in->dst;
}
if (err)
- goto out_unlock;
+ goto relookup_failed;
err = xfrm_lookup((struct dst_entry **)&rt2, &fl, NULL,
XFRM_LOOKUP_ICMP);
- if (err == -ENOENT) {
+ switch (err) {
+ case 0:
+ dst_release(&rt->u.dst);
+ rt = rt2;
+ break;
+ case -EPERM:
+ goto ende;
+ default:
+relookup_failed:
if (!rt)
goto out_unlock;
- goto route_done;
+ break;
}
-
- dst_release(&rt->u.dst);
- rt = rt2;
-
- if (err)
- goto out_unlock;
}
route_done:
void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
{
nf->low_thresh = 0;
+
+ local_bh_disable();
inet_frag_evictor(nf, f);
+ local_bh_enable();
}
EXPORT_SYMBOL(inet_frags_exit_net);
tw->tw_hash = sk->sk_hash;
tw->tw_ipv6only = 0;
tw->tw_prot = sk->sk_prot_creator;
+ tw->tw_net = sk->sk_net;
atomic_set(&tw->tw_refcnt, 1);
inet_twsk_dead_node_init(tw);
__module_get(tw->tw_prot->owner);
if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
goto sr_failed;
- if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
+ if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
(ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
IP_INC_STATS_BH(IPSTATS_MIB_REASMREQDS);
- net = skb->dev->nd_net;
+ net = skb->dev ? skb->dev->nd_net : skb->dst->dev->nd_net;
/* Start by cleaning up the memory. */
if (atomic_read(&net->ipv4.frags.mem) > net->ipv4.frags.high_thresh)
ip_evictor(net);
}
release_sock(sk);
- if (len < sizeof(int) && len > 0 && val>=0 && val<255) {
+ if (len < sizeof(int) && len > 0 && val>=0 && val<=255) {
unsigned char ucval = (unsigned char)val;
len = 1;
if (put_user(len, optlen))
/*
* Decode any IP configuration options in the "ip=" or "nfsaddrs=" kernel
- * command line parameter. See Documentation/nfsroot.txt.
+ * command line parameter. See Documentation/filesystems/nfsroot.txt.
*/
static int __init ic_proto_name(char *name)
{
}
#ifdef CONFIG_PROC_FS
- proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
- if (proc) {
- proc->owner = THIS_MODULE;
- proc->proc_fops = &ip_queue_proc_fops;
- } else {
+ proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+ &ip_queue_proc_fops);
+ if (!proc) {
printk(KERN_ERR "ip_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
/* create proc dir entry */
sprintf(buffer, "%u.%u.%u.%u", NIPQUAD(ip));
- c->pde = create_proc_entry(buffer, S_IWUSR|S_IRUSR,
- clusterip_procdir);
+ c->pde = proc_create(buffer, S_IWUSR|S_IRUSR,
+ clusterip_procdir, &clusterip_proc_fops);
if (!c->pde) {
kfree(c);
return NULL;
}
}
- c->pde->proc_fops = &clusterip_proc_fops;
c->pde->data = c;
#endif
for (i = 0; i < ip_list_hash_size; i++)
INIT_LIST_HEAD(&t->iphash[i]);
#ifdef CONFIG_PROC_FS
- t->proc = create_proc_entry(t->name, ip_list_perms, proc_dir);
+ t->proc = proc_create(t->name, ip_list_perms, proc_dir, &recent_fops);
if (t->proc == NULL) {
kfree(t);
goto out;
}
- t->proc->proc_fops = &recent_fops;
t->proc->uid = ip_list_uid;
t->proc->gid = ip_list_gid;
t->proc->data = t;
if (!proc_exp)
goto err2;
- proc_stat = create_proc_entry("ip_conntrack", S_IRUGO, init_net.proc_net_stat);
+ proc_stat = proc_create("ip_conntrack", S_IRUGO,
+ init_net.proc_net_stat, &ct_cpu_seq_fops);
if (!proc_stat)
goto err3;
-
- proc_stat->proc_fops = &ct_cpu_seq_fops;
- proc_stat->owner = THIS_MODULE;
-
return 0;
err3:
size_t i;
int ret;
+ need_ipv4_conntrack();
+
ret = nf_ct_extend_register(&nat_extend);
if (ret < 0) {
printk(KERN_ERR "nf_nat_core: Unable to register extension\n");
if (!(psize -= copy))
goto out;
- if (skb->len < mss_now || (flags & MSG_OOB))
+ if (skb->len < size_goal || (flags & MSG_OOB))
continue;
if (forced_push(tp)) {
if ((seglen -= copy) == 0 && iovlen == 0)
goto out;
- if (skb->len < mss_now || (flags & MSG_OOB))
+ if (skb->len < size_goal || (flags & MSG_OOB))
continue;
if (forced_push(tp)) {
return flag;
}
-/* If we receive more dupacks than we expected counting segments
- * in assumption of absent reordering, interpret this as reordering.
- * The only another reason could be bug in receiver TCP.
+/* Limits sacked_out so that sum with lost_out isn't ever larger than
+ * packets_out. Returns zero if sacked_out adjustement wasn't necessary.
*/
-static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+int tcp_limit_reno_sacked(struct tcp_sock *tp)
{
- struct tcp_sock *tp = tcp_sk(sk);
u32 holes;
holes = max(tp->lost_out, 1U);
if ((tp->sacked_out + holes) > tp->packets_out) {
tp->sacked_out = tp->packets_out - holes;
- tcp_update_reordering(sk, tp->packets_out + addend, 0);
+ return 1;
}
+ return 0;
+}
+
+/* If we receive more dupacks than we expected counting segments
+ * in assumption of absent reordering, interpret this as reordering.
+ * The only another reason could be bug in receiver TCP.
+ */
+static void tcp_check_reno_reordering(struct sock *sk, const int addend)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ if (tcp_limit_reno_sacked(tp))
+ tcp_update_reordering(sk, tp->packets_out + addend, 0);
}
/* Emulate SACKs for SACKless connection: account for a new dupack. */
int tcp_use_frto(struct sock *sk)
{
const struct tcp_sock *tp = tcp_sk(sk);
+ const struct inet_connection_sock *icsk = inet_csk(sk);
struct sk_buff *skb;
if (!sysctl_tcp_frto)
return 0;
+ /* MTU probe and F-RTO won't really play nicely along currently */
+ if (icsk->icsk_mtup.probe_size)
+ return 0;
+
if (IsSackFrto())
return 1;
/* Mark head of queue up as lost. With RFC3517 SACK, the packets is
* is against sacked "cnt", otherwise it's against facked "cnt"
*/
-static void tcp_mark_head_lost(struct sock *sk, int packets, int fast_rexmit)
+static void tcp_mark_head_lost(struct sock *sk, int packets)
{
struct tcp_sock *tp = tcp_sk(sk);
struct sk_buff *skb;
- int cnt;
+ int cnt, oldcnt;
+ int err;
+ unsigned int mss;
BUG_TRAP(packets <= tp->packets_out);
if (tp->lost_skb_hint) {
tp->lost_skb_hint = skb;
tp->lost_cnt_hint = cnt;
+ if (after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
+ break;
+
+ oldcnt = cnt;
if (tcp_is_fack(tp) || tcp_is_reno(tp) ||
(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))
cnt += tcp_skb_pcount(skb);
- if (((!fast_rexmit || (tp->lost_out > 0)) && (cnt > packets)) ||
- after(TCP_SKB_CB(skb)->end_seq, tp->high_seq))
- break;
+ if (cnt > packets) {
+ if (tcp_is_sack(tp) || (oldcnt >= packets))
+ break;
+
+ mss = skb_shinfo(skb)->gso_size;
+ err = tcp_fragment(sk, skb, (packets - oldcnt) * mss, mss);
+ if (err < 0)
+ break;
+ cnt = packets;
+ }
+
if (!(TCP_SKB_CB(skb)->sacked & (TCPCB_SACKED_ACKED|TCPCB_LOST))) {
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
struct tcp_sock *tp = tcp_sk(sk);
if (tcp_is_reno(tp)) {
- tcp_mark_head_lost(sk, 1, fast_rexmit);
+ tcp_mark_head_lost(sk, 1);
} else if (tcp_is_fack(tp)) {
int lost = tp->fackets_out - tp->reordering;
if (lost <= 0)
lost = 1;
- tcp_mark_head_lost(sk, lost, fast_rexmit);
+ tcp_mark_head_lost(sk, lost);
} else {
int sacked_upto = tp->sacked_out - tp->reordering;
- if (sacked_upto < 0)
- sacked_upto = 0;
- tcp_mark_head_lost(sk, sacked_upto, fast_rexmit);
+ if (sacked_upto < fast_rexmit)
+ sacked_upto = fast_rexmit;
+ tcp_mark_head_lost(sk, sacked_upto);
}
/* New heuristics: it is possible only after we switched
before(tp->snd_una, tp->high_seq) &&
icsk->icsk_ca_state != TCP_CA_Open &&
tp->fackets_out > tp->reordering) {
- tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering, 0);
+ tcp_mark_head_lost(sk, tp->fackets_out - tp->reordering);
NET_INC_STATS_BH(LINUX_MIB_TCPLOSS);
}
case TCP_CA_Loss:
if (flag & FLAG_DATA_ACKED)
icsk->icsk_retransmits = 0;
+ if (tcp_is_reno(tp) && flag & FLAG_SND_UNA_ADVANCED)
+ tcp_reset_reno_sack(tp);
if (!tcp_try_undo_loss(sk)) {
tcp_moderate_cwnd(tp);
tcp_xmit_retransmit_queue(sk);
if (!lost)
return;
+ if (tcp_is_reno(tp))
+ tcp_limit_reno_sacked(tp);
+
tcp_verify_left_out(tp);
/* Don't muck with the congestion window here.
__acquires(udp_hash_lock)
{
read_lock(&udp_hash_lock);
- return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
+ return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
}
static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct sock *sk;
- if (v == (void *)1)
+ if (v == SEQ_START_TOKEN)
sk = udp_get_idx(seq, 0);
else
sk = udp_get_next(seq, v);
static int xfrm4_beet_output(struct xfrm_state *x, struct sk_buff *skb)
{
struct ip_beet_phdr *ph;
- struct iphdr *iph, *top_iph;
+ struct iphdr *top_iph;
int hdrlen, optlen;
- iph = ip_hdr(skb);
-
hdrlen = 0;
- optlen = iph->ihl * 4 - sizeof(*iph);
+ optlen = XFRM_MODE_SKB_CB(skb)->optlen;
if (unlikely(optlen))
hdrlen += IPV4_BEET_PHMAXLEN - (optlen & 4);
hdrlen);
skb->mac_header = skb->network_header +
offsetof(struct iphdr, protocol);
- skb->transport_header = skb->network_header + sizeof(*iph);
+ skb->transport_header = skb->network_header + sizeof(*top_iph);
xfrm4_beet_make_header(skb);
- ph = (struct ip_beet_phdr *)__skb_pull(skb, sizeof(*iph) - hdrlen);
+ ph = (struct ip_beet_phdr *)
+ __skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl - hdrlen);
top_iph = ip_hdr(skb);
top_iph->ihl = 5;
top_iph->version = 4;
- top_iph->protocol = x->inner_mode->afinfo->proto;
+ top_iph->protocol = xfrm_af2proto(skb->dst->ops->family);
/* DS disclosed */
top_iph->tos = INET_ECN_encapsulate(XFRM_MODE_SKB_CB(skb)->tos,
{
int err;
- err = x->inner_mode->afinfo->extract_output(x, skb);
+ err = xfrm_inner_extract_output(x, skb);
if (err)
return err;
{
struct iphdr *iph = ip_hdr(skb);
+ XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
XFRM_MODE_SKB_CB(skb)->id = iph->id;
XFRM_MODE_SKB_CB(skb)->frag_off = iph->frag_off;
XFRM_MODE_SKB_CB(skb)->tos = iph->tos;
XFRM_MODE_SKB_CB(skb)->ttl = iph->ttl;
+ XFRM_MODE_SKB_CB(skb)->optlen = iph->ihl * 4 - sizeof(*iph);
memset(XFRM_MODE_SKB_CB(skb)->flow_lbl, 0,
sizeof(XFRM_MODE_SKB_CB(skb)->flow_lbl));
struct inet6_dev *idev = ifp->idev;
struct in6_addr addr, *tmpaddr;
unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
+ unsigned long regen_advance;
int tmp_plen;
int ret = 0;
int max_addresses;
tmp_tstamp = ifp->tstamp;
spin_unlock_bh(&ifp->lock);
+ regen_advance = idev->cnf.regen_max_retry *
+ idev->cnf.dad_transmits *
+ idev->nd_parms->retrans_time / HZ;
write_unlock(&idev->lock);
+ /* A temporary address is created only if this calculated Preferred
+ * Lifetime is greater than REGEN_ADVANCE time units. In particular,
+ * an implementation must not create a temporary address with a zero
+ * Preferred Lifetime.
+ */
+ if (tmp_prefered_lft <= regen_advance) {
+ in6_ifa_put(ifp);
+ in6_dev_put(idev);
+ ret = -1;
+ goto out;
+ }
+
addr_flags = IFA_F_TEMPORARY;
/* set in addrconf_prefix_rcv() */
if (ifp->flags & IFA_F_OPTIMISTIC)
* lifetimes of an existing temporary address
* when processing a Prefix Information Option.
*/
+ if (ifp != ift->ifpub)
+ continue;
+
spin_lock(&ift->lock);
flags = ift->flags;
if (ift->valid_lft > valid_lft &&
ASSERT_RTNL();
- if (dev == init_net.loopback_dev && how == 1)
+ if ((dev->flags & IFF_LOOPBACK) && how == 1)
how = 0;
rt6_ifdown(dev);
/* Step 1: remove reference to ipv6 device from parent device.
Do not dev_put!
*/
- if (how == 1) {
+ if (how) {
idev->dead = 1;
/* protected by rtnl_lock */
write_lock_bh(&idev->lock);
/* Step 3: clear flags for stateless addrconf */
- if (how != 1)
+ if (!how)
idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
/* Step 4: clear address list */
#ifdef CONFIG_IPV6_PRIVACY
- if (how == 1 && del_timer(&idev->regen_timer))
+ if (how && del_timer(&idev->regen_timer))
in6_dev_put(idev);
/* clear tempaddr list */
/* Step 5: Discard multicast list */
- if (how == 1)
+ if (how)
ipv6_mc_destroy_dev(idev);
else
ipv6_mc_down(idev);
/* Shot the device (if unregistered) */
- if (how == 1) {
+ if (how) {
addrconf_sysctl_unregister(idev);
neigh_parms_release(&nd_tbl, idev->nd_parms);
neigh_ifdown(&nd_tbl, dev);
idev->ac_list = aca;
write_unlock_bh(&idev->lock);
- dst_hold(&rt->u.dst);
- if (ip6_ins_rt(rt))
- dst_release(&rt->u.dst);
+ ip6_ins_rt(rt);
addrconf_join_solict(dev, &aca->aca_addr);
addrconf_leave_solict(idev, &aca->aca_addr);
dst_hold(&aca->aca_rt->u.dst);
- if (ip6_del_rt(aca->aca_rt))
- dst_free(&aca->aca_rt->u.dst);
- else
- dst_release(&aca->aca_rt->u.dst);
+ ip6_del_rt(aca->aca_rt);
aca_put(aca);
return 0;
struct scatterlist *sg;
struct scatterlist *asg;
- if (!pskb_may_pull(skb, sizeof(*esph))) {
+ if (!pskb_may_pull(skb, sizeof(*esph) + crypto_aead_ivsize(aead))) {
ret = -EINVAL;
goto out;
}
}
if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
- goto out;
+ goto relookup_failed;
if (ip6_dst_lookup(sk, &dst2, &fl))
- goto out;
+ goto relookup_failed;
err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
- if (err == -ENOENT) {
+ switch (err) {
+ case 0:
+ dst_release(dst);
+ dst = dst2;
+ break;
+ case -EPERM:
+ goto out_dst_release;
+ default:
+relookup_failed:
if (!dst)
goto out;
- goto route_done;
+ break;
}
- dst_release(dst);
- dst = dst2;
-
- if (err)
- goto out;
-
route_done:
if (ipv6_addr_is_multicast(&fl.fl6_dst))
hlimit = np->mcast_hops;
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
- deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
- ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
+ deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
/*
* IPv6 multicast router mode isnt currently supported.
}
}
+static struct pneigh_entry *pndisc_check_router(struct net_device *dev,
+ struct in6_addr *addr, int *is_router)
+{
+ struct pneigh_entry *n;
+
+ read_lock_bh(&nd_tbl.lock);
+ n = __pneigh_lookup(&nd_tbl, &init_net, addr, dev);
+ if (n != NULL)
+ *is_router = (n->flags & NTF_ROUTER);
+ read_unlock_bh(&nd_tbl.lock);
+
+ return n;
+}
+
static void ndisc_recv_ns(struct sk_buff *skb)
{
struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
struct pneigh_entry *pneigh = NULL;
int dad = ipv6_addr_any(saddr);
int inc;
- int is_router;
+ int is_router = 0;
if (ipv6_addr_is_multicast(&msg->target)) {
ND_PRINTK2(KERN_WARNING
if (ipv6_chk_acast_addr(dev, &msg->target) ||
(idev->cnf.forwarding &&
(ipv6_devconf.proxy_ndp || idev->cnf.proxy_ndp) &&
- (pneigh = pneigh_lookup(&nd_tbl, &init_net,
- &msg->target, dev, 0)) != NULL)) {
+ (pneigh = pndisc_check_router(dev, &msg->target,
+ &is_router)) != NULL)) {
if (!(NEIGH_CB(skb)->flags & LOCALLY_ENQUEUED) &&
skb->pkt_type != PACKET_HOST &&
inc != 0 &&
goto out;
}
- is_router = !!(pneigh ? pneigh->flags & NTF_ROUTER : idev->cnf.forwarding);
+ is_router = !!(pneigh ? is_router : idev->cnf.forwarding);
if (dad) {
struct in6_addr maddr;
u8 *opt;
int rd_len;
int err;
- int hlen;
u8 ha_buf[MAX_ADDR_LEN], *ha = NULL;
dev = skb->dev;
return;
}
- hlen = 0;
skb_reserve(buff, LL_RESERVED_SPACE(dev));
ip6_nd_hdr(sk, buff, dev, &saddr_buf, &ipv6_hdr(skb)->saddr,
}
#ifdef CONFIG_PROC_FS
- proc = create_proc_entry(IPQ_PROC_FS_NAME, 0, init_net.proc_net);
- if (proc) {
- proc->owner = THIS_MODULE;
- proc->proc_fops = &ip6_queue_proc_fops;
- } else {
+ proc = proc_create(IPQ_PROC_FS_NAME, 0, init_net.proc_net,
+ &ip6_queue_proc_fops);
+ if (!proc) {
printk(KERN_ERR "ip6_queue: failed to create proc entry\n");
goto cleanup_ipqnl;
}
static void nf_ct_frag6_evictor(void)
{
+ local_bh_disable();
inet_frag_evictor(&nf_init_frags, &nf_frags);
+ local_bh_enable();
}
static void nf_ct_frag6_expire(unsigned long data)
skb->mac_header = skb->network_header +
offsetof(struct ipv6hdr, nexthdr);
skb->transport_header = skb->network_header + sizeof(*top_iph);
+ __skb_pull(skb, XFRM_MODE_SKB_CB(skb)->ihl);
xfrm6_beet_make_header(skb);
memcpy(top_iph->flow_lbl, XFRM_MODE_SKB_CB(skb)->flow_lbl,
sizeof(top_iph->flow_lbl));
- top_iph->nexthdr = x->inner_mode->afinfo->proto;
+ top_iph->nexthdr = xfrm_af2proto(skb->dst->ops->family);
dsfield = XFRM_MODE_SKB_CB(skb)->tos;
dsfield = INET_ECN_encapsulate(dsfield, dsfield);
{
int err;
- err = x->inner_mode->afinfo->extract_output(x, skb);
+ err = xfrm_inner_extract_output(x, skb);
if (err)
return err;
{
struct ipv6hdr *iph = ipv6_hdr(skb);
+ XFRM_MODE_SKB_CB(skb)->ihl = sizeof(*iph);
XFRM_MODE_SKB_CB(skb)->id = 0;
XFRM_MODE_SKB_CB(skb)->frag_off = htons(IP_DF);
XFRM_MODE_SKB_CB(skb)->tos = ipv6_get_dsfield(iph);
XFRM_MODE_SKB_CB(skb)->ttl = iph->hop_limit;
+ XFRM_MODE_SKB_CB(skb)->optlen = 0;
memcpy(XFRM_MODE_SKB_CB(skb)->flow_lbl, iph->flow_lbl,
sizeof(XFRM_MODE_SKB_CB(skb)->flow_lbl));
/* "pppd" interact directly with us on a /dev/ file */
struct file * file; /* File descriptor of this instance */
/* TTY stuff - to keep "pppd" happy */
- struct termios termios; /* Various tty flags */
+ struct ktermios termios; /* Various tty flags */
/* Stuff for the control channel */
int event_index; /* Last read in the event log */
x->sel.prefixlen_s = addr->sadb_address_prefixlen;
}
- if (!x->sel.family)
+ if (x->props.mode == XFRM_MODE_TRANSPORT)
x->sel.family = x->props.family;
if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
struct sock *sk;
int rc = -ESOCKTNOSUPPORT;
+ if (!capable(CAP_NET_RAW))
+ return -EPERM;
+
if (net != &init_net)
return -EAFNOSUPPORT;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
llc_pdu_decode_pf_bit(skb, &f_bit);
else
f_bit = 0;
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
struct llc_sock *llc = llc_sk(sk);
llc_pdu_decode_pf_bit(skb, &f_bit);
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
u8 f_bit;
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
llc_pdu_decode_pf_bit(skb, &f_bit);
if (nskb) {
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
LIST_HEAD(llc_sap_list);
DEFINE_RWLOCK(llc_sap_list_lock);
-unsigned char llc_station_mac_sa[ETH_ALEN];
-
/**
* llc_sap_alloc - allocates and initializes sap.
*
struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
if (sap) {
+ /* sap->laddr.mac - leave as a null, it's filled by bind */
sap->state = LLC_SAP_STATE_ACTIVE;
- memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
rwlock_init(&sap->sk_list.lock);
atomic_set(&sap->refcnt, 1);
}
if (dev != NULL)
dev = next_net_device(dev);
- if (dev != NULL)
- memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
- else
- memset(llc_station_mac_sa, 0, ETH_ALEN);
dev_add_pack(&llc_packet_type);
dev_add_pack(&llc_tr_packet_type);
return 0;
module_init(llc_init);
module_exit(llc_exit);
-EXPORT_SYMBOL(llc_station_mac_sa);
EXPORT_SYMBOL(llc_sap_list);
EXPORT_SYMBOL(llc_sap_list_lock);
EXPORT_SYMBOL(llc_sap_find);
skb_pull(skb, llc_len);
if (skb->protocol == htons(ETH_P_802_2)) {
__be16 pdulen = eth_hdr(skb)->h_proto;
- u16 data_size = ntohs(pdulen) - llc_len;
+ s32 data_size = ntohs(pdulen) - llc_len;
+ if (data_size < 0 ||
+ ((skb_tail_pointer(skb) -
+ (u8 *)pdu) - llc_len) < data_size)
+ return 0;
if (unlikely(pskb_trim_rcsum(skb, data_size)))
return 0;
}
FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
- skb_put(skb, 5);
+ skb_put(skb, sizeof(struct llc_frmr_info));
}
/**
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
struct sk_buff *nskb;
int rc = 1;
+ u32 data_size;
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
#include <net/tcp_states.h>
#include <linux/llc.h>
+static int llc_mac_header_len(unsigned short devtype)
+{
+ switch (devtype) {
+ case ARPHRD_ETHER:
+ case ARPHRD_LOOPBACK:
+ return sizeof(struct ethhdr);
+#ifdef CONFIG_TR
+ case ARPHRD_IEEE802_TR:
+ return sizeof(struct trh_hdr);
+#endif
+ }
+ return 0;
+}
+
/**
* llc_alloc_frame - allocates sk_buff for frame
* @dev: network device this skb will be sent over
+ * @type: pdu type to allocate
+ * @data_size: data size to allocate
*
* Allocates an sk_buff for frame and initializes sk_buff fields.
* Returns allocated skb or %NULL when out of memory.
*/
-struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
+struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size)
{
- struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
+ int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+ struct sk_buff *skb;
+
+ hlen += llc_mac_header_len(dev->type);
+ skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
if (skb) {
skb_reset_mac_header(skb);
- skb_reserve(skb, 50);
+ skb_reserve(skb, hlen);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
skb->protocol = htons(ETH_P_802_2);
static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
{
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ u32 data_size;
+ struct sk_buff *nskb;
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_test_rsp(nskb, skb);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
if (need_hw_reconfig)
ieee80211_hw_config(local);
+ /*
+ * ieee80211_sta_work is disabled while network interface
+ * is down. Therefore, some configuration changes may not
+ * yet be effective. Trigger execution of ieee80211_sta_work
+ * to fix this.
+ */
+ if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+ sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ queue_work(local->hw.workqueue, &ifsta->work);
+ }
+
netif_start_queue(dev);
return 0;
}
}
-
-static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
- u8 erp_value)
+static u32 ieee80211_handle_protect_preamb(struct ieee80211_sub_if_data *sdata,
+ bool use_protection,
+ bool use_short_preamble)
{
struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
- bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
- bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
DECLARE_MAC_BUF(mac);
u32 changed = 0;
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
- if (preamble_mode != bss_conf->use_short_preamble) {
+ if (use_short_preamble != bss_conf->use_short_preamble) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: switched to %s barker preamble"
" (BSSID=%s)\n",
sdata->dev->name,
- (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
- "short" : "long",
+ use_short_preamble ? "short" : "long",
print_mac(mac, ifsta->bssid));
}
- bss_conf->use_short_preamble = preamble_mode;
+ bss_conf->use_short_preamble = use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
return changed;
}
+static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
+ u8 erp_value)
+{
+ bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
+ bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
+
+ return ieee80211_handle_protect_preamb(sdata,
+ use_protection, use_short_preamble);
+}
+
+static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_sta_bss *bss)
+{
+ u32 changed = 0;
+
+ if (bss->has_erp_value)
+ changed |= ieee80211_handle_erp_ie(sdata, bss->erp_value);
+ else {
+ u16 capab = bss->capability;
+ changed |= ieee80211_handle_protect_preamb(sdata, false,
+ (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+ }
+
+ return changed;
+}
+
int ieee80211_ht_cap_ie_to_ht_info(struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_ht_info *ht_info)
{
local->hw.conf.channel,
ifsta->ssid, ifsta->ssid_len);
if (bss) {
- if (bss->has_erp_value)
- changed |= ieee80211_handle_erp_ie(
- sdata, bss->erp_value);
+ changed |= ieee80211_handle_bss_capability(sdata, bss);
ieee80211_rx_bss_put(dev, bss);
}
if (elems.erp_info && elems.erp_info_len >= 1)
changed |= ieee80211_handle_erp_ie(sdata, elems.erp_info[0]);
+ else {
+ u16 capab = le16_to_cpu(mgmt->u.beacon.capab_info);
+ changed |= ieee80211_handle_protect_preamb(sdata, false,
+ (capab & WLAN_CAPABILITY_SHORT_PREAMBLE) != 0);
+ }
if (elems.ht_cap_elem && elems.ht_info_elem &&
elems.wmm_param && local->ops->conf_ht &&
static int __init nf_conntrack_standalone_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc, *proc_stat;
+ struct proc_dir_entry *proc;
#endif
int ret = 0;
proc = proc_net_fops_create(&init_net, "nf_conntrack", 0440, &ct_file_ops);
if (!proc) goto cleanup_init;
- proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, init_net.proc_net_stat);
- if (!proc_stat)
+ if (!proc_create("nf_conntrack", S_IRUGO,
+ init_net.proc_net_stat, &ct_cpu_seq_fops))
goto cleanup_proc;
-
- proc_stat->proc_fops = &ct_cpu_seq_fops;
- proc_stat->owner = THIS_MODULE;
#endif
#ifdef CONFIG_SYSCTL
nf_ct_sysctl_header = register_sysctl_paths(nf_ct_path,
int __init netfilter_log_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *pde;
-
- pde = create_proc_entry("nf_log", S_IRUGO, proc_net_netfilter);
- if (!pde)
+ if (!proc_create("nf_log", S_IRUGO,
+ proc_net_netfilter, &nflog_file_ops))
return -1;
-
- pde->proc_fops = &nflog_file_ops;
#endif
return 0;
}
int __init netfilter_queue_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *pde;
-
- pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde)
+ if (!proc_create("nf_queue", S_IRUGO,
+ proc_net_netfilter, &nfqueue_file_ops))
return -1;
- pde->proc_fops = &nfqueue_file_ops;
#endif
return 0;
}
static int __init nfnetlink_log_init(void)
{
int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc_nful;
-#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
}
#ifdef CONFIG_PROC_FS
- proc_nful = create_proc_entry("nfnetlink_log", 0440,
- proc_net_netfilter);
- if (!proc_nful)
+ if (!proc_create("nfnetlink_log", 0440,
+ proc_net_netfilter, &nful_file_ops))
goto cleanup_subsys;
- proc_nful->proc_fops = &nful_file_ops;
#endif
return status;
static int __init nfnetlink_queue_init(void)
{
int i, status = -ENOMEM;
-#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc_nfqueue;
-#endif
for (i = 0; i < INSTANCE_BUCKETS; i++)
INIT_HLIST_HEAD(&instance_table[i]);
}
#ifdef CONFIG_PROC_FS
- proc_nfqueue = create_proc_entry("nfnetlink_queue", 0440,
- proc_net_netfilter);
- if (!proc_nfqueue)
+ if (!proc_create("nfnetlink_queue", 0440,
+ proc_net_netfilter, &nfqnl_file_ops))
goto cleanup_subsys;
- proc_nfqueue->proc_fops = &nfqnl_file_ops;
#endif
register_netdevice_notifier(&nfqnl_dev_notifier);
hinfo->family = family;
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
- hinfo->pde = create_proc_entry(minfo->name, 0,
- family == AF_INET ? hashlimit_procdir4 :
- hashlimit_procdir6);
+ hinfo->pde = proc_create(minfo->name, 0,
+ family == AF_INET ? hashlimit_procdir4 :
+ hashlimit_procdir6,
+ &dl_file_ops);
if (!hinfo->pde) {
vfree(hinfo);
return -1;
}
- hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long )hinfo);
hinfo->rnd_initialized = 0;
spin_lock_init(&hinfo->lock);
- hinfo->pde = create_proc_entry(minfo->name, 0,
- family == AF_INET ? hashlimit_procdir4 :
- hashlimit_procdir6);
+ hinfo->pde = proc_create(minfo->name, 0,
+ family == AF_INET ? hashlimit_procdir4 :
+ hashlimit_procdir6,
+ &dl_file_ops);
if (hinfo->pde == NULL) {
vfree(hinfo);
return -1;
}
- hinfo->pde->proc_fops = &dl_file_ops;
hinfo->pde->data = hinfo;
setup_timer(&hinfo->timer, htable_gc, (unsigned long)hinfo);
static inline __be32 maskl(__be32 a, unsigned int l)
{
- return htonl(ntohl(a) & ~(~(u_int32_t)0 >> l));
+ return l ? htonl(ntohl(a) & ~0 << (32 - l)) : 0;
}
#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
static void hashlimit_ipv6_mask(__be32 *i, unsigned int p)
{
switch (p) {
- case 0:
- i[0] = i[1] = 0;
- i[2] = i[3] = 0;
- break;
- case 1 ... 31:
+ case 0 ... 31:
i[0] = maskl(i[0], p);
i[1] = i[2] = i[3] = 0;
break;
- case 32:
- i[1] = i[2] = i[3] = 0;
- break;
- case 33 ... 63:
+ case 32 ... 63:
i[1] = maskl(i[1], p - 32);
i[2] = i[3] = 0;
break;
- case 64:
- i[2] = i[3] = 0;
- break;
- case 65 ... 95:
+ case 64 ... 95:
i[2] = maskl(i[2], p - 64);
i[3] = 0;
- case 96:
- i[3] = 0;
- break;
- case 97 ... 127:
+ case 96 ... 127:
i[3] = maskl(i[3], p - 96);
break;
case 128:
if (sk == NULL) return 0;
+ sock_hold(sk);
+ sock_orphan(sk);
+ lock_sock(sk);
rose = rose_sk(sk);
switch (rose->state) {
case ROSE_STATE_0:
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
case ROSE_STATE_2:
rose->neighbour->use--;
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
}
sock->sk = NULL;
+ release_sock(sk);
+ sock_put(sk);
return 0;
}
struct rxrpc_crypt {
union {
u8 x[FCRYPT_BSIZE];
- u32 n[2];
+ __be32 n[2];
};
} __attribute__((aligned(8)));
extern unsigned rxrpc_debug;
#define dbgprintk(FMT,...) \
- printk("[%x%-6.6s] "FMT"\n", smp_processor_id(), current->comm ,##__VA_ARGS__)
+ printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
/* make sure we maintain the format strings, even when debugging is disabled */
static inline __attribute__((format(printf,1,2)))
__be32 x[2];
} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
__be32 x;
+ u32 y;
int ret;
sp = rxrpc_skb(skb);
sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
- x = ntohl(tmpbuf.x[1]);
- x = (x >> 16) & 0xffff;
- if (x == 0)
- x = 1; /* zero checksums are not permitted */
- sp->hdr.cksum = htons(x);
+ y = ntohl(tmpbuf.x[1]);
+ y = (y >> 16) & 0xffff;
+ if (y == 0)
+ y = 1; /* zero checksums are not permitted */
+ sp->hdr.cksum = htons(y);
switch (call->conn->security_level) {
case RXRPC_SECURITY_PLAIN:
break;
}
- _leave(" = %d [set %hx]", ret, x);
+ _leave(" = %d [set %hx]", ret, y);
return ret;
}
__be32 x[2];
} tmpbuf __attribute__((aligned(8))); /* must all be in same page */
__be32 x;
+ u16 y;
__be16 cksum;
int ret;
sg_init_one(&sg[1], &tmpbuf, sizeof(tmpbuf));
crypto_blkcipher_encrypt_iv(&desc, &sg[0], &sg[1], sizeof(tmpbuf));
- x = ntohl(tmpbuf.x[1]);
- x = (x >> 16) & 0xffff;
- if (x == 0)
- x = 1; /* zero checksums are not permitted */
+ y = ntohl(tmpbuf.x[1]);
+ y = (y >> 16) & 0xffff;
+ if (y == 0)
+ y = 1; /* zero checksums are not permitted */
- cksum = htons(x);
+ cksum = htons(y);
if (sp->hdr.cksum != cksum) {
*_abort_code = RXKADSEALEDINCON;
_leave(" = -EPROTO [csum failed]");
struct rxrpc_crypt session_key;
time_t expiry;
void *ticket;
- u32 abort_code, version, kvno, ticket_len, csum, level;
+ u32 abort_code, version, kvno, ticket_len, level;
+ __be32 csum;
int ret;
_enter("{%d,%x}", conn->debug_id, key_serial(conn->server_key));
void __qdisc_run(struct net_device *dev)
{
- do {
- if (!qdisc_restart(dev))
+ unsigned long start_time = jiffies;
+
+ while (qdisc_restart(dev)) {
+ if (netif_queue_stopped(dev))
+ break;
+
+ /*
+ * Postpone processing if
+ * 1. another process needs the CPU;
+ * 2. we've been doing it for too long.
+ */
+ if (need_resched() || jiffies != start_time) {
+ netif_schedule(dev);
break;
- } while (!netif_queue_stopped(dev));
+ }
+ }
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}
*/
static psched_time_t htb_do_events(struct htb_sched *q, int level)
{
- int i;
-
- for (i = 0; i < 500; i++) {
+ /* don't run for longer than 2 jiffies; 2 is used instead of
+ 1 to simplify things when jiffy is going to be incremented
+ too soon */
+ unsigned long stop_at = jiffies + 2;
+ while (time_before(jiffies, stop_at)) {
struct htb_class *cl;
long diff;
struct rb_node *p = rb_first(&q->wait_pq[level]);
if (cl->cmode != HTB_CAN_SEND)
htb_add_to_wait_tree(q, cl, diff);
}
- if (net_ratelimit())
- printk(KERN_WARNING "htb: too many events !\n");
- return q->now + PSCHED_TICKS_PER_SEC / 10;
+ /* too much load - let's continue on next jiffie */
+ return q->now + PSCHED_TICKS_PER_SEC / HZ;
}
/* Returns class->node+prio from id-tree where classe's id is >= id. NULL
if (!dlci_ioctl_hook)
request_module("dlci");
- if (dlci_ioctl_hook) {
- mutex_lock(&dlci_ioctl_mutex);
+ mutex_lock(&dlci_ioctl_mutex);
+ if (dlci_ioctl_hook)
err = dlci_ioctl_hook(cmd, argp);
- mutex_unlock(&dlci_ioctl_mutex);
- }
+ mutex_unlock(&dlci_ioctl_mutex);
break;
default:
err = sock->ops->ioctl(sock, cmd, arg);
};
char servername[48];
- xprt = xprt_create_transport(&xprtargs);
- if (IS_ERR(xprt))
- return (struct rpc_clnt *)xprt;
-
/*
* If the caller chooses not to specify a hostname, whip
* up a string representation of the passed-in address.
pgto = pages + (pgbase >> PAGE_CACHE_SHIFT);
pgbase &= ~PAGE_CACHE_MASK;
- do {
+ for (;;) {
copy = PAGE_CACHE_SIZE - pgbase;
if (copy > len)
copy = len;
memcpy(vto + pgbase, p, copy);
kunmap_atomic(vto, KM_USER0);
+ len -= copy;
+ if (len == 0)
+ break;
+
pgbase += copy;
if (pgbase == PAGE_CACHE_SIZE) {
flush_dcache_page(*pgto);
pgto++;
}
p += copy;
-
- } while ((len -= copy) != 0);
+ }
flush_dcache_page(*pgto);
}
static int rdma_read_max_sge(struct svcxprt_rdma *xprt, int sge_count)
{
-#ifdef RDMA_TRANSPORT_IWARP
if ((RDMA_TRANSPORT_IWARP ==
rdma_node_get_transport(xprt->sc_cm_id->
device->node_type))
&& sge_count > 1)
return 1;
else
-#endif
return min_t(int, sge_count, xprt->sc_max_sge);
}
ctxt->direction = DMA_FROM_DEVICE;
clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- if ((ch+1)->rc_discrim == 0) {
- /*
- * Checked in sq_cq_reap to see if we need to
- * be enqueued
- */
- set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
- }
/* Prepare READ WR */
memset(&read_wr, 0, sizeof read_wr);
rdma_set_ctxt_sge(ctxt, &sge[ch_sge_ary[ch_no].start],
&sgl_offset,
read_wr.num_sge);
-
+ if (((ch+1)->rc_discrim == 0) &&
+ (read_wr.num_sge == ch_sge_ary[ch_no].count)) {
+ /*
+ * Mark the last RDMA_READ with a bit to
+ * indicate all RPC data has been fetched from
+ * the client and the RPC needs to be enqueued.
+ */
+ set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
+ ctxt->next = hdr_ctxt;
+ hdr_ctxt->next = head;
+ }
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
- params.listen_interval = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+ params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
if (parse_station_flags(info->attrs[NL80211_ATTR_STA_FLAGS],
¶ms.station_flags))
int xfrm_prepare_input(struct xfrm_state *x, struct sk_buff *skb)
{
+ struct xfrm_mode *inner_mode = x->inner_mode;
int err;
err = x->outer_mode->afinfo->extract_input(x, skb);
if (err)
return err;
- skb->protocol = x->inner_mode->afinfo->eth_proto;
- return x->inner_mode->input2(x, skb);
+ if (x->sel.family == AF_UNSPEC) {
+ inner_mode = xfrm_ip2inner_mode(x, XFRM_MODE_SKB_CB(skb)->protocol);
+ if (inner_mode == NULL)
+ return -EAFNOSUPPORT;
+ }
+
+ skb->protocol = inner_mode->afinfo->eth_proto;
+ return inner_mode->input2(x, skb);
}
EXPORT_SYMBOL(xfrm_prepare_input);
__be32 seq;
struct xfrm_state *x;
xfrm_address_t *daddr;
+ struct xfrm_mode *inner_mode;
unsigned int family;
int decaps = 0;
int async = 0;
XFRM_MODE_SKB_CB(skb)->protocol = nexthdr;
- if (x->inner_mode->input(x, skb)) {
+ inner_mode = x->inner_mode;
+
+ if (x->sel.family == AF_UNSPEC) {
+ inner_mode = xfrm_ip2inner_mode(x, XFRM_MODE_SKB_CB(skb)->protocol);
+ if (inner_mode == NULL)
+ goto drop;
+ }
+
+ if (inner_mode->input(x, skb)) {
XFRM_INC_STATS(LINUX_MIB_XFRMINSTATEMODEERROR);
goto drop;
}
if (!x)
return dst_output(skb);
- err = nf_hook(x->inner_mode->afinfo->family,
+ err = nf_hook(skb->dst->ops->family,
NF_INET_POST_ROUTING, skb,
NULL, skb->dst->dev, xfrm_output2);
if (unlikely(err != 1))
return xfrm_output2(skb);
}
+
+int xfrm_inner_extract_output(struct xfrm_state *x, struct sk_buff *skb)
+{
+ struct xfrm_mode *inner_mode;
+ if (x->sel.family == AF_UNSPEC)
+ inner_mode = xfrm_ip2inner_mode(x,
+ xfrm_af2proto(skb->dst->ops->family));
+ else
+ inner_mode = x->inner_mode;
+
+ if (inner_mode == NULL)
+ return -EAFNOSUPPORT;
+ return inner_mode->afinfo->extract_output(x, skb);
+}
+
EXPORT_SYMBOL_GPL(xfrm_output);
+EXPORT_SYMBOL_GPL(xfrm_inner_extract_output);
kfree(x->coaddr);
if (x->inner_mode)
xfrm_put_mode(x->inner_mode);
+ if (x->inner_mode_iaf)
+ xfrm_put_mode(x->inner_mode_iaf);
if (x->outer_mode)
xfrm_put_mode(x->outer_mode);
if (x->type) {
x->lft.hard_packet_limit = XFRM_INF;
x->replay_maxage = 0;
x->replay_maxdiff = 0;
+ x->inner_mode = NULL;
+ x->inner_mode_iaf = NULL;
spin_lock_init(&x->lock);
}
return x;
selector.
*/
if (x->km.state == XFRM_STATE_VALID) {
- if (!xfrm_selector_match(&x->sel, fl, x->sel.family) ||
+ if ((x->sel.family && !xfrm_selector_match(&x->sel, fl, x->sel.family)) ||
!security_xfrm_state_pol_flow_match(x, pol, fl))
continue;
if (!best ||
int xfrm_init_state(struct xfrm_state *x)
{
struct xfrm_state_afinfo *afinfo;
+ struct xfrm_mode *inner_mode;
int family = x->props.family;
int err;
goto error;
err = -EPROTONOSUPPORT;
- x->inner_mode = xfrm_get_mode(x->props.mode, x->sel.family);
- if (x->inner_mode == NULL)
- goto error;
- if (!(x->inner_mode->flags & XFRM_MODE_FLAG_TUNNEL) &&
- family != x->sel.family)
- goto error;
+ if (x->sel.family != AF_UNSPEC) {
+ inner_mode = xfrm_get_mode(x->props.mode, x->sel.family);
+ if (inner_mode == NULL)
+ goto error;
+
+ if (!(inner_mode->flags & XFRM_MODE_FLAG_TUNNEL) &&
+ family != x->sel.family) {
+ xfrm_put_mode(inner_mode);
+ goto error;
+ }
+
+ x->inner_mode = inner_mode;
+ } else {
+ struct xfrm_mode *inner_mode_iaf;
+
+ inner_mode = xfrm_get_mode(x->props.mode, AF_INET);
+ if (inner_mode == NULL)
+ goto error;
+
+ if (!(inner_mode->flags & XFRM_MODE_FLAG_TUNNEL)) {
+ xfrm_put_mode(inner_mode);
+ goto error;
+ }
+
+ inner_mode_iaf = xfrm_get_mode(x->props.mode, AF_INET6);
+ if (inner_mode_iaf == NULL)
+ goto error;
+
+ if (!(inner_mode_iaf->flags & XFRM_MODE_FLAG_TUNNEL)) {
+ xfrm_put_mode(inner_mode_iaf);
+ goto error;
+ }
+
+ if (x->props.family == AF_INET) {
+ x->inner_mode = inner_mode;
+ x->inner_mode_iaf = inner_mode_iaf;
+ } else {
+ x->inner_mode = inner_mode_iaf;
+ x->inner_mode_iaf = inner_mode;
+ }
+ }
x->type = xfrm_get_type(x->id.proto, family);
if (x->type == NULL)
memcpy(&x->props.saddr, &p->saddr, sizeof(x->props.saddr));
x->props.flags = p->flags;
- /*
- * Set inner address family if the KM left it as zero.
- * See comment in validate_tmpl.
- */
if (!x->sel.family)
x->sel.family = p->family;
+
}
/*
# Stop after building .o files if NOFINAL is set. Makes compile tests quicker
_modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules))
+ifneq ($(KBUILD_BUILDHOST),$(ARCH))
+ cross_build := 1
+endif
# Step 2), invoke modpost
# Includes step 3,4
$(if $(CONFIG_DEBUG_SECTION_MISMATCH),,-S) \
$(if $(CONFIG_MARKERS),-K $(kernelmarkersfile)) \
$(if $(CONFIG_MARKERS),-M $(markersfile)) \
- $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w)
+ $(if $(KBUILD_EXTMOD)$(KBUILD_MODPOST_WARN),-w) \
+ $(if $(cross_build),-c)
quiet_cmd_modpost = MODPOST $(words $(filter-out vmlinux FORCE, $^)) modules
cmd_modpost = $(modpost) -s
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.15';
+my $V = '0.16';
use Getopt::Long qw(:config no_auto_abbrev);
my $chk_signoff = 1;
my $chk_patch = 1;
my $tst_type = 0;
+my $tst_only;
my $emacs = 0;
my $terse = 0;
my $file = 0;
'debug=s' => \%debug,
'test-type!' => \$tst_type,
+ 'test-only=s' => \$tst_only,
) or exit;
my $exit = 0;
return $res;
}
sub copy_spacing {
- my ($str) = @_;
-
- my $res = '';
- for my $c (split(//, $str)) {
- if ($c eq "\t") {
- $res .= $c;
- } else {
- $res .= ' ';
- }
- }
-
+ (my $res = shift) =~ tr/\t/ /c;
return $res;
}
return (length($line), length($white));
}
+my $sanitise_quote = '';
+
+sub sanitise_line_reset {
+ my ($in_comment) = @_;
+
+ if ($in_comment) {
+ $sanitise_quote = '*/';
+ } else {
+ $sanitise_quote = '';
+ }
+}
sub sanitise_line {
my ($line) = @_;
my $res = '';
my $l = '';
- my $quote = '';
my $qlen = 0;
+ my $off = 0;
+ my $c;
- foreach my $c (split(//, $line)) {
- # The second backslash of a pair is not a "quote".
- if ($l eq "\\" && $c eq "\\") {
- $c = 'X';
- }
- if ($l ne "\\" && ($c eq "'" || $c eq '"')) {
- if ($quote eq '') {
- $quote = $c;
- $res .= $c;
- $l = $c;
- $qlen = 0;
- next;
- } elsif ($quote eq $c) {
- $quote = '';
- }
+ # Always copy over the diff marker.
+ $res = substr($line, 0, 1);
+
+ for ($off = 1; $off < length($line); $off++) {
+ $c = substr($line, $off, 1);
+
+ # Comments we are wacking completly including the begin
+ # and end, all to $;.
+ if ($sanitise_quote eq '' && substr($line, $off, 2) eq '/*') {
+ $sanitise_quote = '*/';
+
+ substr($res, $off, 2, "$;$;");
+ $off++;
+ next;
}
- if ($quote eq "'" && $qlen > 1) {
- $quote = '';
+ if (substr($line, $off, 2) eq $sanitise_quote) {
+ $sanitise_quote = '';
+ substr($res, $off, 2, "$;$;");
+ $off++;
+ next;
}
- if ($quote && $c ne "\t") {
- $res .= "X";
- $qlen++;
- } else {
- $res .= $c;
+
+ # A \ in a string means ignore the next character.
+ if (($sanitise_quote eq "'" || $sanitise_quote eq '"') &&
+ $c eq "\\") {
+ substr($res, $off, 2, 'XX');
+ $off++;
+ next;
}
+ # Regular quotes.
+ if ($c eq "'" || $c eq '"') {
+ if ($sanitise_quote eq '') {
+ $sanitise_quote = $c;
- $l = $c;
- }
+ substr($res, $off, 1, $c);
+ next;
+ } elsif ($sanitise_quote eq $c) {
+ $sanitise_quote = '';
+ }
+ }
- # Clear out the comments.
- while ($res =~ m@(/\*.*?\*/)@g) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
- }
- if ($res =~ m@(/\*.*)@) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
- }
- if ($res =~ m@^.(.*\*/)@) {
- substr($res, $-[1], $+[1] - $-[1]) = $; x ($+[1] - $-[1]);
+ #print "SQ:$sanitise_quote\n";
+ if ($off != 0 && $sanitise_quote eq '*/' && $c ne "\t") {
+ substr($res, $off, 1, $;);
+ } elsif ($off != 0 && $sanitise_quote && $c ne "\t") {
+ substr($res, $off, 1, 'X');
+ } else {
+ substr($res, $off, 1, $c);
+ }
}
# The pathname on a #include may be surrounded by '<' and '>'.
my $blk = '';
my $soff = $off;
my $coff = $off - 1;
+ my $coff_set = 0;
my $loff = 0;
my $remainder;
while (1) {
- #warn "CSB: blk<$blk>\n";
+ #warn "CSB: blk<$blk> remain<$remain>\n";
# If we are about to drop off the end, pull in more
# context.
if ($off >= $len) {
$c = substr($blk, $off, 1);
$remainder = substr($blk, $off);
- #warn "CSB: c<$c> type<$type> level<$level>\n";
+ #warn "CSB: c<$c> type<$type> level<$level> remainder<$remainder> coff_set<$coff_set>\n";
# Statement ends at the ';' or a close '}' at the
# outermost level.
if ($level == 0 && $c eq ';') {
}
# An else is really a conditional as long as its not else if
- if ($level == 0 && (!defined($p) || $p =~ /(?:\s|\})/) &&
- $remainder =~ /(else)(?:\s|{)/ &&
- $remainder !~ /else\s+if\b/) {
- $coff = $off + length($1);
+ if ($level == 0 && $coff_set == 0 &&
+ (!defined($p) || $p =~ /(?:\s|\}|\+)/) &&
+ $remainder =~ /^(else)(?:\s|{)/ &&
+ $remainder !~ /^else\s+if\b/) {
+ $coff = $off + length($1) - 1;
+ $coff_set = 1;
+ #warn "CSB: mark coff<$coff> soff<$soff> 1<$1>\n";
+ #warn "[" . substr($blk, $soff, $coff - $soff + 1) . "]\n";
}
if (($type eq '' || $type eq '(') && $c eq '(') {
if ($level == 0 && $coff < $soff) {
$coff = $off;
+ $coff_set = 1;
+ #warn "CSB: mark coff<$coff>\n";
}
}
if (($type eq '' || $type eq '{') && $c eq '{') {
#warn "STATEMENT<$statement>\n";
#warn "CONDITION<$condition>\n";
- #print "off<$off> loff<$loff>\n";
+ #print "coff<$coff> soff<$off> loff<$loff>\n";
return ($statement, $condition,
$line, $remain + 1, $off - $loff + 1, $level);
# Grab the first conditional/block pair.
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
- #print "F: c<$condition> s<$statement>\n";
+ #print "F: c<$condition> s<$statement> remain<$remain>\n";
push(@chunks, [ $condition, $statement ]);
if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:if|else|do)\b/s)) {
return ($level, $linenr, @chunks);
($statement, $condition, $linenr, $remain, $off, $level) =
ctx_statement_block($linenr, $remain, $off);
#print "C: c<$condition> s<$statement> remain<$remain>\n";
- last if (!($remain > 0 && $condition =~ /^\s*(?:\n[+-])?\s*(?:else|do)\b/s));
+ last if (!($remain > 0 && $condition =~ /^(?:\s*\n[+-])*\s*(?:else|do)\b/s));
#print "C: push\n";
push(@chunks, [ $condition, $statement ]);
}
print "$stream\n" if ($dbg_values > 1);
while (length($cur)) {
+ @av_paren_type = ('E') if ($#av_paren_type < 0);
print " <" . join('', @av_paren_type) .
"> <$type> " if ($dbg_values > 1);
if ($cur =~ /^(\s+)/o) {
my $prefix = '';
sub report {
+ if (defined $tst_only && $_[0] !~ /\Q$tst_only\E/) {
+ return 0;
+ }
my $line = $prefix . $_[0];
$line = (split('\n', $line))[0] . "\n" if ($terse);
push(our @report, $line);
+
+ return 1;
}
sub report_dump {
our @report;
}
sub ERROR {
- report("ERROR: $_[0]\n");
- our $clean = 0;
- our $cnt_error++;
+ if (report("ERROR: $_[0]\n")) {
+ our $clean = 0;
+ our $cnt_error++;
+ }
}
sub WARN {
- report("WARNING: $_[0]\n");
- our $clean = 0;
- our $cnt_warn++;
+ if (report("WARNING: $_[0]\n")) {
+ our $clean = 0;
+ our $cnt_warn++;
+ }
}
sub CHK {
- if ($check) {
- report("CHECK: $_[0]\n");
+ if ($check && report("CHECK: $_[0]\n")) {
our $clean = 0;
our $cnt_chk++;
}
my $prev_values = 'E';
# suppression flags
- my $suppress_ifbraces = 0;
+ my %suppress_ifbraces;
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
#
my @setup_docs = ();
my $setup_docs = 0;
+
+ sanitise_line_reset();
my $line;
foreach my $rawline (@rawlines) {
- # Standardise the strings and chars within the input to
- # simplify matching.
- $line = sanitise_line($rawline);
- push(@lines, $line);
-
- ##print "==>$rawline\n";
- ##print "-->$line\n";
+ $linenr++;
+ $line = $rawline;
- if ($line=~/^\+\+\+\s+(\S+)/) {
+ if ($rawline=~/^\+\+\+\s+(\S+)/) {
$setup_docs = 0;
if ($1 =~ m@Documentation/kernel-parameters.txt$@) {
$setup_docs = 1;
}
- next;
+ #next;
+ }
+ if ($rawline=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
+ $realline=$1-1;
+ if (defined $2) {
+ $realcnt=$3+1;
+ } else {
+ $realcnt=1+1;
+ }
+
+ # Guestimate if this is a continuing comment. Run
+ # the context looking for a comment "edge". If this
+ # edge is a close comment then we must be in a comment
+ # at context start.
+ my $edge;
+ for (my $ln = $linenr; $ln < ($linenr + $realcnt); $ln++) {
+ next if ($line =~ /^-/);
+ ($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
+ last if (defined $edge);
+ }
+ if (defined $edge && $edge eq '*/') {
+ $in_comment = 1;
+ }
+
+ # Guestimate if this is a continuing comment. If this
+ # is the start of a diff block and this line starts
+ # ' *' then it is very likely a comment.
+ if (!defined $edge &&
+ $rawlines[$linenr] =~ m@^.\s* \*(?:\s|$)@)
+ {
+ $in_comment = 1;
+ }
+
+ ##print "COMMENT:$in_comment edge<$edge> $rawline\n";
+ sanitise_line_reset($in_comment);
+
+ } elsif ($realcnt) {
+ # Standardise the strings and chars within the input to
+ # simplify matching.
+ $line = sanitise_line($rawline);
}
+ push(@lines, $line);
+
+ if ($realcnt > 1) {
+ $realcnt-- if ($line =~ /^(?:\+| |$)/);
+ } else {
+ $realcnt = 0;
+ }
+
+ #print "==>$rawline\n";
+ #print "-->$line\n";
if ($setup_docs && $line =~ /^\+/) {
push(@setup_docs, $line);
$prefix = '';
+ $realcnt = 0;
+ $linenr = 0;
foreach my $line (@lines) {
$linenr++;
my $rawline = $rawlines[$linenr - 1];
-#extract the filename as it passes
- if ($line=~/^\+\+\+\s+(\S+)/) {
- $realfile=$1;
- $realfile =~ s@^[^/]*/@@;
- $in_comment = 0;
- next;
- }
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
$is_patch = 1;
$first_line = $linenr + 1;
- $in_comment = 0;
$realline=$1-1;
if (defined $2) {
$realcnt=$3+1;
annotate_reset();
$prev_values = 'E';
- $suppress_ifbraces = $linenr - 1;
+ %suppress_ifbraces = ();
next;
- }
# track the line number as we move through the hunk, note that
# new versions of GNU diff omit the leading space on completely
# blank context lines so we need to count that too.
- if ($line =~ /^( |\+|$)/) {
+ } elsif ($line =~ /^( |\+|$)/) {
$realline++;
$realcnt-- if ($realcnt != 0);
- # Guestimate if this is a continuing comment. Run
- # the context looking for a comment "edge". If this
- # edge is a close comment then we must be in a comment
- # at context start.
- if ($linenr == $first_line) {
- my $edge;
- for (my $ln = $first_line; $ln < ($linenr + $realcnt); $ln++) {
- ($edge) = ($rawlines[$ln - 1] =~ m@(/\*|\*/)@);
- last if (defined $edge);
- }
- if (defined $edge && $edge eq '*/') {
- $in_comment = 1;
- }
- }
-
- # Guestimate if this is a continuing comment. If this
- # is the start of a diff block and this line starts
- # ' *' then it is very likely a comment.
- if ($linenr == $first_line and $rawline =~ m@^.\s* \*(?:\s|$)@) {
- $in_comment = 1;
- }
-
- # Find the last comment edge on _this_ line.
- $comment_edge = 0;
- while (($rawline =~ m@(/\*|\*/)@g)) {
- if ($1 eq '/*') {
- $in_comment = 1;
- } else {
- $in_comment = 0;
- }
- $comment_edge = 1;
- }
-
# Measure the line length and indent.
($length, $indent) = line_stats($rawline);
($previndent, $stashindent) = ($stashindent, $indent);
($prevrawline, $stashrawline) = ($stashrawline, $rawline);
- #warn "ic<$in_comment> ce<$comment_edge> line<$line>\n";
+ #warn "line<$line>\n";
} elsif ($realcnt == 1) {
$realcnt--;
}
#make up the handle for any error we report on this line
+ $prefix = "$filename:$realline: " if ($emacs && $file);
+ $prefix = "$filename:$linenr: " if ($emacs && !$file);
+
$here = "#$linenr: " if (!$file);
$here = "#$realline: " if ($file);
+
+ # extract the filename as it passes
+ if ($line=~/^\+\+\+\s+(\S+)/) {
+ $realfile = $1;
+ $realfile =~ s@^[^/]*/@@;
+
+ if ($realfile =~ m@include/asm/@) {
+ ERROR("do not modify files in include/asm, change architecture specific files in include/asm-<architecture>\n" . "$here$rawline\n");
+ }
+ next;
+ }
+
$here .= "FILE: $realfile:$realline:" if ($realcnt != 0);
my $hereline = "$here\n$rawline\n";
my $herecurr = "$here\n$rawline\n";
my $hereprev = "$here\n$prevrawline\n$rawline\n";
- $prefix = "$filename:$realline: " if ($emacs && $file);
- $prefix = "$filename:$linenr: " if ($emacs && !$file);
$cnt_lines++ if ($realcnt != 0);
#check the patch for a signoff:
$herecurr);
}
if ($line =~ /^\s*signed-off-by:\S/i) {
- WARN("need space after Signed-off-by:\n" .
+ WARN("space required after Signed-off-by:\n" .
$herecurr);
}
}
WARN("CVS style keyword markers, these will _not_ be updated\n". $herecurr);
}
-# The rest of our checks refer specifically to C style
-# only apply those _outside_ comments. Only skip
-# lines in the middle of comments.
- next if (!$comment_edge && $in_comment);
-
# Check for potential 'bare' types
if ($realcnt) {
my ($s, $c) = ctx_statement_block($linenr, $realcnt, 0);
my ($name_len) = length($1);
my $ctx = $s;
- substr($ctx, 0, $name_len + 1) = '';
+ substr($ctx, 0, $name_len + 1, '');
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
- if ($line =~ /\b(?:(if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ my $pre_ctx = "$1$2";
+
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
my $ctx_ln = $linenr + $#ctx + 1;
my $ctx_cnt = $realcnt - $#ctx - 1;
my $ctx = join("\n", @ctx);
+ ##warn "realcnt<$realcnt> ctx_cnt<$ctx_cnt>\n";
+
# Skip over any removed lines in the context following statement.
- while ($ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^-/) {
+ while (defined($lines[$ctx_ln - 1]) && $lines[$ctx_ln - 1] =~ /^-/) {
$ctx_ln++;
- $ctx_cnt--;
}
- ##warn "line<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>";
+ ##warn "pre<$pre_ctx>\nline<$line>\nctx<$ctx>\nnext<$lines[$ctx_ln - 1]>\n";
- if ($ctx !~ /{\s*/ && $ctx_cnt > 0 && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
- ERROR("That open brace { should be on the previous line\n" .
+ if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
+ ERROR("that open brace { should be on the previous line\n" .
"$here\n$ctx\n$lines[$ctx_ln - 1]");
}
- if ($level == 0 && $ctx =~ /\)\s*\;\s*$/ && defined $lines[$ctx_ln - 1]) {
+ if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
+ $ctx =~ /\)\s*\;\s*$/ &&
+ defined $lines[$ctx_ln - 1])
+ {
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
- WARN("Trailing semicolon indicates no statements, indent implies otherwise\n" .
+ WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
"$here\n$ctx\n$lines[$ctx_ln - 1]");
}
}
# check for initialisation to aggregates open brace on the next line
if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
$line =~ /^.\s*{/) {
- ERROR("That open brace { should be on the previous line\n" . $hereprev);
+ ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
#
# check for spaces between functions and their parentheses.
while ($line =~ /($Ident)\s+\(/g) {
my $name = $1;
- my $ctx = substr($line, 0, $-[1]);
+ my $ctx_before = substr($line, 0, $-[1]);
+ my $ctx = "$ctx_before$name";
# Ignore those directives where spaces _are_ permitted.
- if ($name =~ /^(?:if|for|while|switch|return|volatile|__volatile__|__attribute__|format|__extension__|Copyright|case|__asm__)$/) {
+ if ($name =~ /^(?:
+ if|for|while|switch|return|case|
+ volatile|__volatile__|
+ __attribute__|format|__extension__|
+ asm|__asm__)$/x)
+ {
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
- } elsif ($ctx =~ /^.\#\s*define\s*$/) {
+ } elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+
+ # cpp #elif statement condition may start with a (
+ } elsif ($ctx =~ /^.\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
- } elsif ("$ctx$name" =~ /$Type$/) {
+ } elsif ($ctx =~ /$Type$/) {
} else {
- WARN("no space between function name and open parenthesis '('\n" . $herecurr);
+ WARN("space prohibited between function name and open parenthesis '('\n" . $herecurr);
}
}
# Check operator spacing.
for (my $n = 0; $n < $#elements; $n += 2) {
$off += length($elements[$n]);
+ # Pick up the preceeding and succeeding characters.
+ my $ca = substr($opline, 0, $off);
+ my $cc = '';
+ if (length($opline) >= ($off + length($elements[$n + 1]))) {
+ $cc = substr($opline, $off + length($elements[$n + 1]));
+ }
+ my $cb = "$ca$;$cc";
+
my $a = '';
$a = 'V' if ($elements[$n] ne '');
$a = 'W' if ($elements[$n] =~ /\s$/);
$a = 'C' if ($elements[$n] =~ /$;$/);
$a = 'B' if ($elements[$n] =~ /(\[|\()$/);
$a = 'O' if ($elements[$n] eq '');
- $a = 'E' if ($elements[$n] eq '' && $n == 0);
+ $a = 'E' if ($ca =~ /^\s*$/);
my $op = $elements[$n + 1];
$c = 'E';
}
- # Pick up the preceeding and succeeding characters.
- my $ca = substr($opline, 0, $off);
- my $cc = '';
- if (length($opline) >= ($off + length($elements[$n + 1]))) {
- $cc = substr($opline, $off + length($elements[$n + 1]));
- }
- my $cb = "$ca$;$cc";
-
my $ctx = "${a}x${c}";
my $at = "(ctx:$ctx)";
} elsif ($op eq ';') {
if ($ctx !~ /.x[WEBC]/ &&
$cc !~ /^\\/ && $cc !~ /^;/) {
- ERROR("need space after that '$op' $at\n" . $hereptr);
+ ERROR("space required after that '$op' $at\n" . $hereptr);
}
# // is a comment
# -> should have no spaces
} elsif ($op eq '->') {
if ($ctx =~ /Wx.|.xW/) {
- ERROR("no spaces around that '$op' $at\n" . $hereptr);
+ ERROR("spaces prohibited around that '$op' $at\n" . $hereptr);
}
# , must have a space on the right.
} elsif ($op eq ',') {
if ($ctx !~ /.x[WEC]/ && $cc !~ /^}/) {
- ERROR("need space after that '$op' $at\n" . $hereptr);
+ ERROR("space required after that '$op' $at\n" . $hereptr);
}
# '*' as part of a type definition -- reported already.
} elsif ($op eq '!' || $op eq '~' ||
($is_unary && ($op eq '*' || $op eq '-' || $op eq '&'))) {
if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) {
- ERROR("need space before that '$op' $at\n" . $hereptr);
+ ERROR("space required before that '$op' $at\n" . $hereptr);
}
if ($ctx =~ /.xW/) {
- ERROR("no space after that '$op' $at\n" . $hereptr);
+ ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
# unary ++ and unary -- are allowed no space on one side.
} elsif ($op eq '++' or $op eq '--') {
- if ($ctx !~ /[WOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
- ERROR("need space one side of that '$op' $at\n" . $hereptr);
+ if ($ctx !~ /[WEOBC]x[^W]/ && $ctx !~ /[^W]x[WOBEC]/) {
+ ERROR("space required one side of that '$op' $at\n" . $hereptr);
+ }
+ if ($ctx =~ /Wx[BE]/ ||
+ ($ctx =~ /Wx./ && $cc =~ /^;/)) {
+ ERROR("space prohibited before that '$op' $at\n" . $hereptr);
}
- if ($ctx =~ /WxB/ || ($ctx =~ /Wx./ && $cc =~ /^;/)) {
- ERROR("no space before that '$op' $at\n" . $hereptr);
+ if ($ctx =~ /ExW/) {
+ ERROR("space prohibited after that '$op' $at\n" . $hereptr);
}
+
# << and >> may either have or not have spaces both sides
} elsif ($op eq '<<' or $op eq '>>' or
$op eq '&' or $op eq '^' or $op eq '|' or
$op eq '*' or $op eq '/' or
$op eq '%')
{
- if ($ctx !~ /VxV|WxW|VxE|WxE|VxO|Cx.|.xC/) {
+ if ($ctx =~ /Wx[^WCE]|[^WCE]xW/) {
ERROR("need consistent spacing around '$op' $at\n" .
$hereptr);
}
# Ignore email addresses <foo@bar>
if (!($op eq '<' && $cb =~ /$;\S+\@\S+>/) &&
!($op eq '>' && $cb =~ /<\S+\@\S+$;/)) {
- ERROR("need spaces around that '$op' $at\n" . $hereptr);
+ ERROR("spaces required around that '$op' $at\n" . $hereptr);
}
}
$off += length($elements[$n + 1]);
#need space before brace following if, while, etc
if (($line =~ /\(.*\){/ && $line !~ /\($Type\){/) ||
$line =~ /do{/) {
- ERROR("need a space before the open brace '{'\n" . $herecurr);
+ ERROR("space required before the open brace '{'\n" . $herecurr);
}
# closing brace should have a space following it when it has anything
# on the line
if ($line =~ /}(?!(?:,|;|\)))\S/) {
- ERROR("need a space after that close brace '}'\n" . $herecurr);
+ ERROR("space required after that close brace '}'\n" . $herecurr);
}
# check spacing on square brackets
if ($line =~ /\[\s/ && $line !~ /\[\s*$/) {
- ERROR("no space after that open square bracket '['\n" . $herecurr);
+ ERROR("space prohibited after that open square bracket '['\n" . $herecurr);
}
if ($line =~ /\s\]/) {
- ERROR("no space before that close square bracket ']'\n" . $herecurr);
+ ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
# check spacing on paretheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
- ERROR("no space after that open parenthesis '('\n" . $herecurr);
+ ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
$line !~ /for\s*\(.*;\s+\)/) {
- ERROR("no space before that close parenthesis ')'\n" . $herecurr);
+ ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
#goto labels aren't indented, allow a single space however
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
- ERROR("need a space before the open parenthesis '('\n" . $herecurr);
+ ERROR("space required before the open parenthesis '('\n" . $herecurr);
}
# Check for illegal assignment in if conditional.
# Find out what is on the end of the line after the
# conditional.
- substr($s, 0, length($c)) = '';
+ substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
- if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/) {
+ if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
+ $c !~ /^.\#\s*if/)
+ {
ERROR("trailing statements should be on next line\n" . $herecurr);
}
}
# Find out what is on the end of the line after the
# conditional.
- substr($s, 0, length($c)) = '';
+ substr($s, 0, length($c), '');
$s =~ s/\n.*//g;
if ($s =~ /^\s*;/) {
if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
my $checkfile = "$root/include/linux/$1.h";
if (-f $checkfile && $1 ne 'irq.h') {
-
CHK("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
+
WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
$herecurr);
}
}
if ($#chunks > 0 && $level == 0) {
my $allowed = 0;
my $seen = 0;
- my $herectx = $here . "\n";;
+ my $herectx = $here . "\n";
my $ln = $linenr - 1;
for my $chunk (@chunks) {
my ($cond, $block) = @{$chunk};
- $herectx .= "$rawlines[$ln]\n[...]\n";
+ # If the condition carries leading newlines, then count those as offsets.
+ my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s);
+ my $offset = statement_rawlines($whitespace) - 1;
+
+ #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n";
+
+ # We have looked at and allowed this specific line.
+ $suppress_ifbraces{$ln + $offset} = 1;
+
+ $herectx .= "$rawlines[$ln + $offset]\n[...]\n";
$ln += statement_rawlines($block) - 1;
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
$seen++ if ($block =~ /^\s*{/);
if ($seen && !$allowed) {
WARN("braces {} are not necessary for any arm of this statement\n" . $herectx);
}
- # Either way we have looked over this whole
- # statement and said what needs to be said.
- $suppress_ifbraces = $endln;
}
}
- if ($linenr > $suppress_ifbraces &&
+ if (!defined $suppress_ifbraces{$linenr - 1} &&
$line =~ /\b(if|while|for|else)\b/) {
- my ($level, $endln, @chunks) =
- ctx_statement_full($linenr, $realcnt, $-[0]);
-
my $allowed = 0;
# Check the pre-context.
#print "APW: ALLOWED: pre<$1>\n";
$allowed = 1;
}
+
+ my ($level, $endln, @chunks) =
+ ctx_statement_full($linenr, $realcnt, $-[0]);
+
# Check the condition.
my ($cond, $block) = @{$chunks[0]};
+ #print "CHECKING<$linenr> cond<$cond> block<$block>\n";
if (defined $cond) {
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
}
if (statement_lines($cond) > 1) {
#print "APW: ALLOWED: cond<$cond>\n";
if (defined $chunks[1]) {
my ($cond, $block) = @{$chunks[1]};
if (defined $cond) {
- substr($block, 0, length($cond)) = '';
+ substr($block, 0, length($cond), '');
}
if ($block =~ /^\s*\{/) {
#print "APW: ALLOWED: chunk-1 block<$block>\n";
if ($line =~ /__FUNCTION__/) {
WARN("__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr);
}
+
+# check for semaphores used as mutexes
+ if ($line =~ /\b(DECLARE_MUTEX|init_MUTEX)\s*\(/) {
+ WARN("mutexes are preferred for single holder semaphores\n" . $herecurr);
+ }
+# check for semaphores used as mutexes
+ if ($line =~ /\binit_MUTEX_LOCKED\s*\(/) {
+ WARN("consider using a completion\n" . $herecurr);
+ }
+# recommend strict_strto* over simple_strto*
+ if ($line =~ /\bsimple_(strto.*?)\s*\(/) {
+ WARN("consider using strict_$1 in preference to simple_$1\n" . $herecurr);
+ }
+
+# use of NR_CPUS is usually wrong
+# ignore definitions of NR_CPUS and usage to define arrays as likely right
+ if ($line =~ /\bNR_CPUS\b/ &&
+ $line !~ /^.#\s*define\s+NR_CPUS\s+/ &&
+ $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/)
+ {
+ WARN("usage of NR_CPUS is often wrong - consider using cpu_possible(), num_possible_cpus(), for_each_possible_cpu(), etc\n" . $herecurr);
+ }
}
# If we have no input at all, then there is nothing to report on
sprintf(str + strlen(str), "*"); \
} while(0)
+unsigned int cross_build = 0;
/**
* Check that sizeof(device_id type) are consistent with size of section
* in .o file. If in-consistent then userspace and kernel does not agree
* on actual size which is a bug.
* Also verify that the final entry in the table is all zeros.
+ * Ignore both checks if build host differ from target host and size differs.
**/
static void device_id_check(const char *modname, const char *device_id,
unsigned long size, unsigned long id_size,
int i;
if (size % id_size || size < id_size) {
+ if (cross_build != 0)
+ return;
fatal("%s: sizeof(struct %s_device_id)=%lu is not a modulo "
"of the size of section __mod_%s_device_table=%lu.\n"
"Fix definition of struct %s_device_id "
int opt;
int err;
- while ((opt = getopt(argc, argv, "i:I:msSo:awM:K:")) != -1) {
+ while ((opt = getopt(argc, argv, "i:I:cmsSo:awM:K:")) != -1) {
switch (opt) {
case 'i':
kernel_read = optarg;
module_read = optarg;
external_module = 1;
break;
+ case 'c':
+ cross_build = 1;
+ break;
case 'm':
modversions = 1;
break;
};
/* file2alias.c */
+extern unsigned int cross_build;
void handle_moddevtable(struct module *mod, struct elf_info *info,
Elf_Sym *sym, const char *symname);
void add_moddevtable(struct buffer *buf, struct module *mod);
struct task_security_struct *tsec = current->security;
struct inode_security_struct *isec;
- isec = kmem_cache_zalloc(sel_inode_cache, GFP_KERNEL);
+ isec = kmem_cache_zalloc(sel_inode_cache, GFP_NOFS);
if (!isec)
return -ENOMEM;
* this early in the boot process. */
BUG_ON(!ss_initialized);
- /* this might go away sometime down the line if there is a new user
- * of clone, but for now, nfs better not get here... */
- BUG_ON(newsbsec->initialized);
-
/* how can we clone if the old one wasn't set up?? */
BUG_ON(!oldsbsec->initialized);
+ /* if fs is reusing a sb, just let its options stand... */
+ if (newsbsec->initialized)
+ return;
+
mutex_lock(&newsbsec->lock);
newsbsec->flags = oldsbsec->flags;
}
len = INITCONTEXTLEN;
- context = kmalloc(len, GFP_KERNEL);
+ context = kmalloc(len, GFP_NOFS);
if (!context) {
rc = -ENOMEM;
dput(dentry);
}
kfree(context);
len = rc;
- context = kmalloc(len, GFP_KERNEL);
+ context = kmalloc(len, GFP_NOFS);
if (!context) {
rc = -ENOMEM;
dput(dentry);
rc = 0;
} else {
rc = security_context_to_sid_default(context, rc, &sid,
- sbsec->def_sid);
+ sbsec->def_sid,
+ GFP_NOFS);
if (rc) {
printk(KERN_WARNING "%s: context_to_sid(%s) "
"returned %d for dev=%s ino=%ld\n",
else
av |= FILE__WRITE;
}
+ if (!av) {
+ /*
+ * Special file opened with flags 3 for ioctl-only use.
+ */
+ av = FILE__IOCTL;
+ }
return av;
}
return -EOPNOTSUPP;
if (name) {
- namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_KERNEL);
+ namep = kstrdup(XATTR_SELINUX_SUFFIX, GFP_NOFS);
if (!namep)
return -ENOMEM;
*name = namep;
int security_context_to_sid(char *scontext, u32 scontext_len,
u32 *out_sid);
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *out_sid, u32 def_sid);
+int security_context_to_sid_default(char *scontext, u32 scontext_len,
+ u32 *out_sid, u32 def_sid, gfp_t gfp_flags);
int security_get_user_sids(u32 callsid, char *username,
u32 **sids, u32 *nel);
}
-static int security_context_to_sid_core(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+static int security_context_to_sid_core(char *scontext, u32 scontext_len,
+ u32 *sid, u32 def_sid, gfp_t gfp_flags)
{
char *scontext2;
struct context context;
null suffix to the copy to avoid problems with the existing
attr package, which doesn't view the null terminator as part
of the attribute value. */
- scontext2 = kmalloc(scontext_len+1,GFP_KERNEL);
+ scontext2 = kmalloc(scontext_len+1, gfp_flags);
if (!scontext2) {
rc = -ENOMEM;
goto out;
int security_context_to_sid(char *scontext, u32 scontext_len, u32 *sid)
{
return security_context_to_sid_core(scontext, scontext_len,
- sid, SECSID_NULL);
+ sid, SECSID_NULL, GFP_KERNEL);
}
/**
* Returns -%EINVAL if the context is invalid, -%ENOMEM if insufficient
* memory is available, or 0 on success.
*/
-int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid, u32 def_sid)
+int security_context_to_sid_default(char *scontext, u32 scontext_len, u32 *sid,
+ u32 def_sid, gfp_t gfp_flags)
{
return security_context_to_sid_core(scontext, scontext_len,
- sid, def_sid);
+ sid, def_sid, gfp_flags);
}
static int compute_sid_handle_invalid_context(
#define SEQ_READ_FINISHED 1
-/*
- * Disable concurrent writing open() operations
- */
-static struct semaphore smack_write_sem;
-
/*
* Values for parsing cipso rules
* SMK_DIGITLEN: Length of a digit field in a rule.
*/
static int smk_open_load(struct inode *inode, struct file *file)
{
- if ((file->f_flags & O_ACCMODE) == O_RDONLY)
- return seq_open(file, &load_seq_ops);
-
- if (down_interruptible(&smack_write_sem))
- return -ERESTARTSYS;
-
- return 0;
-}
-
-/**
- * smk_release_load - release() for /smack/load
- * @inode: inode structure representing file
- * @file: "load" file pointer
- *
- * For a reading session, use the seq_file release
- * implementation.
- * Otherwise, we are at the end of a writing session so
- * clean everything up.
- */
-static int smk_release_load(struct inode *inode, struct file *file)
-{
- if ((file->f_flags & O_ACCMODE) == O_RDONLY)
- return seq_release(inode, file);
-
- up(&smack_write_sem);
- return 0;
+ return seq_open(file, &load_seq_ops);
}
/**
.read = seq_read,
.llseek = seq_lseek,
.write = smk_write_load,
- .release = smk_release_load,
+ .release = seq_release,
};
/**
}
}
- sema_init(&smack_write_sem, 1);
smk_cipso_doi();
smk_unlbl_ambient(NULL);
EXPORT_SYMBOL(ac97_probe_codec);
+MODULE_LICENSE("GPL");
+
return 1; /* timeout */
}
+static int snd_es1968_ac97_wait_poll(struct es1968 *chip)
+{
+ int timeout = 100000;
+
+ while (timeout-- > 0) {
+ if (!(inb(chip->io_port + ESM_AC97_INDEX) & 1))
+ return 0;
+ }
+ snd_printd("es1968: ac97 timeout\n");
+ return 1; /* timeout */
+}
+
static void snd_es1968_ac97_write(struct snd_ac97 *ac97, unsigned short reg, unsigned short val)
{
struct es1968 *chip = ac97->private_data;
outb(reg | 0x80, chip->io_port + ESM_AC97_INDEX);
/*msleep(1);*/
- if (! snd_es1968_ac97_wait(chip)) {
+ if (!snd_es1968_ac97_wait_poll(chip)) {
data = inw(chip->io_port + ESM_AC97_DATA);
/*msleep(1);*/
}
.name = "aic3x I2C Codec",
.owner = THIS_MODULE,
},
- .id = I2C_DRIVERID_I2CDEV,
.attach_adapter = aic3x_i2c_attach,
.detach_client = aic3x_i2c_detach,
- .command = NULL,
};
static struct i2c_client client_template = {
projects / linux-2.6-omap-h63xx.git / commitdiff