AR5K_RF5112 = 2,
AR5K_RF2413 = 3,
AR5K_RF5413 = 4,
- AR5K_RF2425 = 5,
+ AR5K_RF2316 = 5,
+ AR5K_RF2317 = 6,
+ AR5K_RF2425 = 7,
};
/*
*/
enum ath5k_srev_type {
- AR5K_VERSION_VER,
+ AR5K_VERSION_MAC,
AR5K_VERSION_RAD,
};
#define AR5K_SREV_UNKNOWN 0xffff
-#define AR5K_SREV_VER_AR5210 0x00
-#define AR5K_SREV_VER_AR5311 0x10
-#define AR5K_SREV_VER_AR5311A 0x20
-#define AR5K_SREV_VER_AR5311B 0x30
-#define AR5K_SREV_VER_AR5211 0x40
-#define AR5K_SREV_VER_AR5212 0x50
-#define AR5K_SREV_VER_AR5213 0x55
-#define AR5K_SREV_VER_AR5213A 0x59
-#define AR5K_SREV_VER_AR2413 0x78
-#define AR5K_SREV_VER_AR2414 0x79
-#define AR5K_SREV_VER_AR2424 0xa0 /* PCI-E */
-#define AR5K_SREV_VER_AR5424 0xa3 /* PCI-E */
-#define AR5K_SREV_VER_AR5413 0xa4
-#define AR5K_SREV_VER_AR5414 0xa5
-#define AR5K_SREV_VER_AR5416 0xc0 /* PCI-E */
-#define AR5K_SREV_VER_AR5418 0xca /* PCI-E */
-#define AR5K_SREV_VER_AR2425 0xe2 /* PCI-E */
+#define AR5K_SREV_AR5210 0x00 /* Crete */
+#define AR5K_SREV_AR5311 0x10 /* Maui 1 */
+#define AR5K_SREV_AR5311A 0x20 /* Maui 2 */
+#define AR5K_SREV_AR5311B 0x30 /* Spirit */
+#define AR5K_SREV_AR5211 0x40 /* Oahu */
+#define AR5K_SREV_AR5212 0x50 /* Venice */
+#define AR5K_SREV_AR5213 0x55 /* ??? */
+#define AR5K_SREV_AR5213A 0x59 /* Hainan */
+#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
+#define AR5K_SREV_AR2414 0x70 /* Griffin */
+#define AR5K_SREV_AR5424 0x90 /* Condor */
+#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
+#define AR5K_SREV_AR5414 0xa0 /* Eagle */
+#define AR5K_SREV_AR2415 0xb0 /* Cobra */
+#define AR5K_SREV_AR5416 0xc0 /* PCI-E */
+#define AR5K_SREV_AR5418 0xca /* PCI-E */
+#define AR5K_SREV_AR2425 0xe0 /* Swan */
+#define AR5K_SREV_AR2417 0xf0 /* Nala */
#define AR5K_SREV_RAD_5110 0x00
#define AR5K_SREV_RAD_5111 0x10
#define AR5K_SREV_RAD_2112 0x40
#define AR5K_SREV_RAD_2112A 0x45
#define AR5K_SREV_RAD_2112B 0x46
-#define AR5K_SREV_RAD_SC0 0x50 /* Found on 2413/2414 */
-#define AR5K_SREV_RAD_SC1 0x60 /* Found on 5413/5414 */
-#define AR5K_SREV_RAD_SC2 0xa0 /* Found on 2424-5/5424 */
-#define AR5K_SREV_RAD_5133 0xc0 /* MIMO found on 5418 */
+#define AR5K_SREV_RAD_2413 0x50
+#define AR5K_SREV_RAD_5413 0x60
+#define AR5K_SREV_RAD_2316 0x70
+#define AR5K_SREV_RAD_2317 0x80
+#define AR5K_SREV_RAD_5424 0xa0 /* Mostly same as 5413 */
+#define AR5K_SREV_RAD_2425 0xa2
+#define AR5K_SREV_RAD_5133 0xc0
+
+#define AR5K_SREV_PHY_5211 0x30
+#define AR5K_SREV_PHY_5212 0x41
+#define AR5K_SREV_PHY_2112B 0x43
+#define AR5K_SREV_PHY_2413 0x45
+#define AR5K_SREV_PHY_5413 0x61
+#define AR5K_SREV_PHY_2425 0x70
/* IEEE defs */
#define IEEE80211_MAX_LEN 2500
ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
/*
- * Set the mac revision based on the pci id
+ * Set the mac version based on the pci id
*/
ah->ah_version = mac_version;
0xffffffff;
ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
CHANNEL_5GHZ);
+ ah->ah_phy = AR5K_PHY(0);
- if (ah->ah_version == AR5K_AR5210)
- ah->ah_radio_2ghz_revision = 0;
- else
- ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
- CHANNEL_2GHZ);
-
- /* Return on unsuported chips (unsupported eeprom etc) */
- if ((srev >= AR5K_SREV_VER_AR5416) &&
- (srev < AR5K_SREV_VER_AR2425)) {
- ATH5K_ERR(sc, "Device not yet supported.\n");
- ret = -ENODEV;
- goto err_free;
- } else if (srev == AR5K_SREV_VER_AR2425) {
- ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
- }
-
- /* Identify single chip solutions */
- if (((srev <= AR5K_SREV_VER_AR5414) &&
- (srev >= AR5K_SREV_VER_AR2413)) ||
- (srev == AR5K_SREV_VER_AR2425)) {
- ah->ah_single_chip = true;
- } else {
- ah->ah_single_chip = false;
- }
-
- /* Single chip radio */
- if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
- ah->ah_radio_2ghz_revision = 0;
-
- /* Identify the radio chip*/
- if (ah->ah_version == AR5K_AR5210) {
- ah->ah_radio = AR5K_RF5110;
- /*
- * Register returns 0x0/0x04 for radio revision
- * so ath5k_hw_radio_revision doesn't parse the value
- * correctly. For now we are based on mac's srev to
- * identify RF2425 radio.
- */
- } else if (srev == AR5K_SREV_VER_AR2425) {
- ah->ah_radio = AR5K_RF2425;
- ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
+ /* Try to identify radio chip based on it's srev */
+ switch (ah->ah_radio_5ghz_revision & 0xf0) {
+ case AR5K_SREV_RAD_5111:
ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
+ break;
+ case AR5K_SREV_RAD_5112:
+ case AR5K_SREV_RAD_2112:
ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
+ break;
+ case AR5K_SREV_RAD_2413:
ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
+ break;
+ case AR5K_SREV_RAD_5413:
ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
- } else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
- /* AR5424 */
- if (srev >= AR5K_SREV_VER_AR5424) {
+ break;
+ case AR5K_SREV_RAD_2316:
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+ break;
+ case AR5K_SREV_RAD_2317:
+ ah->ah_radio = AR5K_RF2317;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2317;
+ break;
+ case AR5K_SREV_RAD_5424:
+ if (ah->ah_mac_version == AR5K_SREV_AR2425 ||
+ ah->ah_mac_version == AR5K_SREV_AR2417){
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+ } else {
ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
- /* AR2424 */
- } else {
- ah->ah_radio = AR5K_RF2413; /* For testing */
+ }
+ break;
+ default:
+ /* Identify radio based on mac/phy srev */
+ if (ah->ah_version == AR5K_AR5210) {
+ ah->ah_radio = AR5K_RF5110;
+ ah->ah_single_chip = false;
+ } else if (ah->ah_version == AR5K_AR5211) {
+ ah->ah_radio = AR5K_RF5111;
+ ah->ah_single_chip = false;
+ ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+ CHANNEL_2GHZ);
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2425 >> 4) ||
+ ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2425) {
+ ah->ah_radio = AR5K_RF2425;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2425;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+ } else if (srev == AR5K_SREV_AR5213A &&
+ ah->ah_phy_revision == AR5K_SREV_PHY_2112B) {
+ ah->ah_radio = AR5K_RF5112;
+ ah->ah_single_chip = false;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2112B;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2415 >> 4)) {
+ ah->ah_radio = AR5K_RF2316;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2316;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2316;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR5414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_5413) {
+ ah->ah_radio = AR5K_RF5413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_5413;
+ ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+ } else if (ah->ah_mac_version == (AR5K_SREV_AR2414 >> 4) ||
+ ah->ah_phy_revision == AR5K_SREV_PHY_2413) {
+ ah->ah_radio = AR5K_RF2413;
+ ah->ah_single_chip = true;
+ ah->ah_radio_5ghz_revision = AR5K_SREV_RAD_2413;
ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+ } else {
+ ATH5K_ERR(sc, "Couldn't identify radio revision.\n");
+ ret = -ENODEV;
+ goto err_free;
}
}
- ah->ah_phy = AR5K_PHY(0);
+
+
+ /* Return on unsuported chips (unsupported eeprom etc) */
+ if ((srev >= AR5K_SREV_AR5416) &&
+ (srev < AR5K_SREV_AR2425)) {
+ ATH5K_ERR(sc, "Device not yet supported.\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
/*
* Write PCI-E power save settings
*/
if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
- ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
- ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
- ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
- ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
- ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
- ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
- ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
- ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
- ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
- ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
+ ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
+ /* Shut off RX when elecidle is asserted */
+ ath5k_hw_reg_write(ah, 0x28000039, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x53160824, AR5K_PCIE_SERDES);
+ /* TODO: EEPROM work */
+ ath5k_hw_reg_write(ah, 0xe5980579, AR5K_PCIE_SERDES);
+ /* Shut off PLL and CLKREQ active in L1 */
+ ath5k_hw_reg_write(ah, 0x001defff, AR5K_PCIE_SERDES);
+ /* Preserce other settings */
+ ath5k_hw_reg_write(ah, 0x1aaabe40, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0xbe105554, AR5K_PCIE_SERDES);
+ ath5k_hw_reg_write(ah, 0x000e3007, AR5K_PCIE_SERDES);
+ /* Reset SERDES to load new settings */
+ ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
+ mdelay(1);
}
/*
if (ret)
goto err_free;
- /* Write AR5K_PCICFG_UNK on 2112B and later chips */
- if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
- srev > AR5K_SREV_VER_AR2413) {
- ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
- }
+ /* Enable pci core retry fix on Hainan (5213A) and later chips */
+ if (srev >= AR5K_SREV_AR5213A)
+ ath5k_hw_reg_write(ah, AR5K_PCICFG_RETRY_FIX, AR5K_PCICFG);
/*
- * Get card capabilities, values, ...
+ * Get card capabilities, calibration values etc
+ * TODO: EEPROM work
*/
ret = ath5k_eeprom_init(ah);
if (ret) {
goto err_free;
}
- /* Get MAC address */
+ /* Set MAC address */
ret = ath5k_eeprom_read_mac(ah, mac);
if (ret) {
ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.5.0 (EXPERIMENTAL)");
+MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
/* Known PCI ids */
{ PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
{ PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
{ PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
- { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
+ { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* PCI-E cards */
+ { PCI_VDEVICE(ATHEROS, 0x001d), .driver_data = AR5K_AR5212 }, /* 2417 Nala */
{ 0 }
};
MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
/* Known SREVs */
static struct ath5k_srev_name srev_names[] = {
- { "5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210 },
- { "5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311 },
- { "5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A },
- { "5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B },
- { "5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211 },
- { "5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212 },
- { "5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213 },
- { "5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A },
- { "2413", AR5K_VERSION_VER, AR5K_SREV_VER_AR2413 },
- { "2414", AR5K_VERSION_VER, AR5K_SREV_VER_AR2414 },
- { "2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424 },
- { "5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424 },
- { "5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413 },
- { "5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414 },
- { "5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416 },
- { "5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418 },
- { "2425", AR5K_VERSION_VER, AR5K_SREV_VER_AR2425 },
- { "xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN },
+ { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
+ { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
+ { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
+ { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
+ { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
+ { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
+ { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
+ { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
+ { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
+ { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
+ { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
+ { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
+ { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
+ { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
+ { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
+ { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
+ { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
+ { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+ { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
+ { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
{ "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
{ "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
{ "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
+ { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
{ "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
{ "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC0 },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1 },
- { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2 },
+ { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
+ { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
+ { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+ { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
if (srev_names[i].sr_type != type)
continue;
- if ((val & 0xff) < srev_names[i + 1].sr_val) {
+
+ if ((val & 0xf0) == srev_names[i].sr_val)
+ name = srev_names[i].sr_name;
+
+ if ((val & 0xff) == srev_names[i].sr_val) {
name = srev_names[i].sr_name;
break;
}
goto err_ah;
ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
sc->ah->ah_mac_srev,
sc->ah->ah_phy_revision);
/*
* It may take some time to disable the DMA receive unit
*/
- for (i = 2000; i > 0 &&
+ for (i = 1000; i > 0 &&
(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
i--)
udelay(10);
* have any pending frames. Returns -EBUSY if we still have pending frames,
* -EINVAL if queue number is out of range.
*
- * TODO: Test queue drain code
*/
int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
{
- unsigned int i = 100;
+ unsigned int i = 40;
u32 tx_queue, pending;
ATH5K_TRACE(ah->ah_sc);
udelay(100);
} while (--i && pending);
+ /* For 2413+ order PCU to drop packets using
+ * QUIET mechanism */
+ if (ah->ah_mac_version >= (AR5K_SREV_AR2414 >> 4) &&
+ pending){
+ /* Set periodicity and duration */
+ ath5k_hw_reg_write(ah,
+ AR5K_REG_SM(100, AR5K_QUIET_CTL2_QT_PER)|
+ AR5K_REG_SM(10, AR5K_QUIET_CTL2_QT_DUR),
+ AR5K_QUIET_CTL2);
+
+ /* Enable quiet period for current TSF */
+ ath5k_hw_reg_write(ah,
+ AR5K_QUIET_CTL1_QT_EN |
+ AR5K_REG_SM(ath5k_hw_reg_read(ah,
+ AR5K_TSF_L32_5211) >> 10,
+ AR5K_QUIET_CTL1_NEXT_QT_TSF),
+ AR5K_QUIET_CTL1);
+
+ /* Force channel idle high */
+ AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+
+ /* Wait a while and disable mechanism */
+ udelay(200);
+ AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
+ AR5K_QUIET_CTL1_QT_EN);
+
+ /* Re-check for pending frames */
+ i = 40;
+ do {
+ pending = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_STATUS(queue)) &
+ AR5K_QCU_STS_FRMPENDCNT;
+ udelay(100);
+ } while (--i && pending);
+
+ AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
+ AR5K_DIAG_SW_CHANEL_IDLE_HIGH);
+ }
+
/* Clear register */
ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
if (pending)
return -EBUSY;
}
- /* TODO: Check for success else return error */
+ /* TODO: Check for success on 5210 else return error */
return 0;
}
bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
{
ATH5K_TRACE(ah->ah_sc);
- return ath5k_hw_reg_read(ah, AR5K_INTPEND);
+ return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
}
/**
*/
void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
{
+ u32 val;
+
ATH5K_TRACE(ah->ah_sc);
- AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
+
+ val = ath5k_hw_reg_read(ah, AR5K_BEACON) | AR5K_BEACON_RESET_TSF;
+
+ /*
+ * Each write to the RESET_TSF bit toggles a hardware internal
+ * signal to reset TSF, but if left high it will cause a TSF reset
+ * on the next chip reset as well. Thus we always write the value
+ * twice to clear the signal.
+ */
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
+ ath5k_hw_reg_write(ah, val, AR5K_BEACON);
}
/*
case AR5K_TX_QUEUE_BEACON:
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
AR5K_QCU_MISC_FRSHED_DBA_GT |
- AR5K_QCU_MISC_CBREXP_BCN |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS |
AR5K_QCU_MISC_BCN_ENABLE);
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
case AR5K_TX_QUEUE_CAB:
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
AR5K_QCU_MISC_FRSHED_DBA_GT |
- AR5K_QCU_MISC_CBREXP |
- AR5K_QCU_MISC_CBREXP_BCN);
+ AR5K_QCU_MISC_CBREXP_DIS |
+ AR5K_QCU_MISC_CBREXP_BCN_DIS);
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
case AR5K_TX_QUEUE_UAPSD:
AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
- AR5K_QCU_MISC_CBREXP);
+ AR5K_QCU_MISC_CBREXP_DIS);
break;
case AR5K_TX_QUEUE_DATA:
* http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
*
* 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
*/
#define AR5K_ISR_RXPHY 0x00004000 /* PHY error */
#define AR5K_ISR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
-#define AR5K_ISR_BRSSI 0x00020000
+#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM 0x00800000 /* [5210] */
-#define AR5K_ISR_BCNMISC 0x00800000 /* [5212+] */
-#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_ISR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary status registers [5211+] (0 - 4)
*
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
*/
#define AR5K_SISR0 0x0084 /* Register Address [5211+] */
#define AR5K_SISR0_QCU_TXOK 0x000003ff /* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S 0
#define AR5K_SISR0_QCU_TXDESC 0x03ff0000 /* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S 16
#define AR5K_SISR1 0x0088 /* Register Address [5211+] */
#define AR5K_SISR1_QCU_TXERR 0x000003ff /* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S 0
#define AR5K_SISR1_QCU_TXEOL 0x03ff0000 /* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S 16
#define AR5K_SISR2 0x008c /* Register Address [5211+] */
#define AR5K_SISR2_QCU_TXURN 0x000003ff /* Mask for QCU_TXURN */
+#define AR5K_SISR2_QCU_TXURN_S 0
#define AR5K_SISR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SISR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SISR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SISR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SISR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SISR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SISR2_DTIM_SYNC 0x04000000 /* DTIM sync lost [5212+] */
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S 0
#define AR5K_SISR3_QCBRURN 0x03ff0000 /* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S 16
#define AR5K_SISR4 0x0094 /* Register Address [5211+] */
#define AR5K_SISR4_QTRIG 0x000003ff /* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S 0
/*
* Shadow read-and-clear interrupt status registers [5211+]
#define AR5K_IMR_RXPHY 0x00004000 /* PHY error*/
#define AR5K_IMR_RXKCM 0x00008000 /* RX Key cache miss */
#define AR5K_IMR_SWBA 0x00010000 /* Software beacon alert*/
-#define AR5K_IMR_BRSSI 0x00020000
+#define AR5K_IMR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_IMR_BMISS 0x00040000 /* Beacon missed*/
#define AR5K_IMR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
#define AR5K_IMR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_IMR_RXCHIRP 0x00200000 /* CHIRP Received [5212+]*/
#define AR5K_IMR_SSERR 0x00200000 /* Signaled System Error [5210] */
#define AR5K_IMR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_IMR_TIM 0x00800000 /* [5211+] */
-#define AR5K_IMR_BCNMISC 0x00800000 /* [5212+] */
+#define AR5K_IMR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_IMR_GPIO 0x01000000 /* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN 0x02000000 /* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN 0x04000000 /* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG 0x08000000 /* [5211+] */
+#define AR5K_IMR_QCBRORN 0x02000000 /* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN 0x04000000 /* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
/*
* Secondary interrupt mask registers [5211+] (0 - 4)
#define AR5K_SIMR2_QCU_TXURN_S 0
#define AR5K_SIMR2_MCABT 0x00100000 /* Master Cycle Abort */
#define AR5K_SIMR2_SSERR 0x00200000 /* Signaled System Error */
-#define AR5K_SIMR2_DPERR 0x00400000 /* Det par Error (?) */
+#define AR5K_SIMR2_DPERR 0x00400000 /* Bus parity error */
#define AR5K_SIMR2_TIM 0x01000000 /* [5212+] */
#define AR5K_SIMR2_CAB_END 0x02000000 /* [5212+] */
#define AR5K_SIMR2_DTIM_SYNC 0x04000000 /* DTIM Sync lost [5212+] */
#define AR5K_SIMR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SIMR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SIMR2_DTIM 0x20000000 /* [5212+] */
+#define AR5K_SIMR2_TSFOOR 0x80000000 /* TSF OOR (?) */
#define AR5K_SIMR3 0x00b0 /* Register Address [5211+] */
#define AR5K_SIMR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
#define AR5K_QCU_MISC_FRSHED_M 0x0000000f /* Frame sheduling mask */
#define AR5K_QCU_MISC_FRSHED_ASAP 0 /* ASAP */
#define AR5K_QCU_MISC_FRSHED_CBR 1 /* Constant Bit Rate */
-#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated (?) */
-#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* Time gated (?) */
-#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated (?) */
+#define AR5K_QCU_MISC_FRSHED_DBA_GT 2 /* DMA Beacon alert gated */
+#define AR5K_QCU_MISC_FRSHED_TIM_GT 3 /* TIMT gated */
+#define AR5K_QCU_MISC_FRSHED_BCN_SENT_GT 4 /* Beacon sent gated */
#define AR5K_QCU_MISC_ONESHOT_ENABLE 0x00000010 /* Oneshot enable */
-#define AR5K_QCU_MISC_CBREXP 0x00000020 /* CBR expired (normal queue) */
-#define AR5K_QCU_MISC_CBREXP_BCN 0x00000040 /* CBR expired (beacon queue) */
+#define AR5K_QCU_MISC_CBREXP_DIS 0x00000020 /* Disable CBR expired counter (normal queue) */
+#define AR5K_QCU_MISC_CBREXP_BCN_DIS 0x00000040 /* Disable CBR expired counter (beacon queue) */
#define AR5K_QCU_MISC_BCN_ENABLE 0x00000080 /* Enable Beacon use */
-#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR threshold enabled */
-#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME enalbed */
+#define AR5K_QCU_MISC_CBR_THRES_ENABLE 0x00000100 /* CBR expired threshold enabled */
+#define AR5K_QCU_MISC_RDY_VEOL_POLICY 0x00000200 /* TXE reset when RDYTIME expired or VEOL */
#define AR5K_QCU_MISC_CBR_RESET_CNT 0x00000400 /* CBR threshold (counter) reset */
#define AR5K_QCU_MISC_DCU_EARLY 0x00000800 /* DCU early termination */
#define AR5K_QCU_MISC_DCU_CMP_EN 0x00001000 /* Enable frame compression */
#define AR5K_DCU_LCL_IFS_CW_MAX_S 10
#define AR5K_DCU_LCL_IFS_AIFS 0x0ff00000 /* Arbitrated Interframe Space */
#define AR5K_DCU_LCL_IFS_AIFS_S 20
+#define AR5K_DCU_LCL_IFS_AIFS_MAX 0xfc /* Anything above that can cause DCU to hang */
#define AR5K_QUEUE_DFS_LOCAL_IFS(_q) AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
/*
/*
* DCU misc registers [5211+]
*
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
* behaviour on low priority queues when we have multiple queues
* with pending frames. Intra-frame lockout means we wait until
* the queue's current frame transmits (with post frame backoff and bursting)
* No lockout means there is no special handling.
*/
#define AR5K_DCU_MISC_BASE 0x1100 /* Register Address -Queue0 DCU_MISC */
-#define AR5K_DCU_MISC_BACKOFF 0x000007ff /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_BACKOFF 0x0000003f /* Mask for backoff threshold */
+#define AR5K_DCU_MISC_ETS_RTS_POL 0x00000040 /* End of transmission series
+ station RTS/data failure count
+ reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL 0x00000080 /* End of transmission series
+ CW reset policy */
+#define AR5K_DCU_MISC_FRAG_WAIT 0x00000100 /* Wait for next fragment */
#define AR5K_DCU_MISC_BACKOFF_FRAG 0x00000200 /* Enable backoff while bursting */
#define AR5K_DCU_MISC_HCFPOLL_ENABLE 0x00000800 /* CF - Poll enable */
#define AR5K_DCU_MISC_BACKOFF_PERSIST 0x00001000 /* Persistent backoff */
#define AR5K_DCU_MISC_FRMPRFTCH_ENABLE 0x00002000 /* Enable frame pre-fetch */
#define AR5K_DCU_MISC_VIRTCOL 0x0000c000 /* Mask for Virtual Collision (?) */
-#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
-#define AR5K_DCU_MISC_VIRTCOL_MODIFIED 1
-#define AR5K_DCU_MISC_VIRTCOL_IGNORE 2
+#define AR5K_DCU_MISC_VIRTCOL_NORMAL 0
+#define AR5K_DCU_MISC_VIRTCOL_IGNORE 1
#define AR5K_DCU_MISC_BCN_ENABLE 0x00010000 /* Enable Beacon use */
#define AR5K_DCU_MISC_ARBLOCK_CTL 0x00060000 /* Arbiter lockout control mask */
#define AR5K_DCU_MISC_ARBLOCK_CTL_S 17
#define AR5K_DCU_GBL_IFS_MISC_TURBO_MODE 0x00000008 /* Turbo mode */
#define AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC 0x000003f0 /* SIFS Duration mask */
#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR 0x000ffc00 /* USEC Duration mask */
+#define AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S 10
#define AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY 0x00300000 /* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST 0x00400000 /* SIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST 0x00800000 /* AIFS cnt reset policy (?) */
#define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS 0x01000000 /* Disable random LFSR slice */
#define AR5K_SLEEP_CTL_SLE_S 16
#define AR5K_SLEEP_CTL_SLE_WAKE 0x00000000 /* Force chip awake */
#define AR5K_SLEEP_CTL_SLE_SLP 0x00010000 /* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW 0x00020000 /* Normal sleep policy */
#define AR5K_SLEEP_CTL_SLE_UNITS 0x00000008 /* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL 0x00040000 /* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL 0x00080000 /* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL 0x00100000 /* Sleep policy mode */
/*
* Interrupt pending register
/*
* PCI configuration register
+ * TODO: Fix LED stuff
*/
#define AR5K_PCICFG 0x4010 /* Register Address */
#define AR5K_PCICFG_EEAE 0x00000001 /* Eeprom access enable [5210] */
-#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN 0x00000002 /* Enable sleep clock */
#define AR5K_PCICFG_CLKRUNEN 0x00000004 /* CLKRUN enable [5211+] */
#define AR5K_PCICFG_EESIZE 0x00000018 /* Mask for EEPROM size [5211+] */
#define AR5K_PCICFG_EESIZE_S 3
#define AR5K_PCICFG_EESIZE_4K 0 /* 4K */
#define AR5K_PCICFG_EESIZE_8K 1 /* 8K */
#define AR5K_PCICFG_EESIZE_16K 2 /* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL 3 /* Failed to get size [5211+] */
#define AR5K_PCICFG_LED 0x00000060 /* Led status [5211+] */
#define AR5K_PCICFG_LED_NONE 0x00000000 /* Default [5211+] */
#define AR5K_PCICFG_LED_PEND 0x00000020 /* Scan / Auth pending */
#define AR5K_PCICFG_LED_ASSOC 0x00000040 /* Associated */
#define AR5K_PCICFG_BUS_SEL 0x00000380 /* Mask for "bus select" [5211+] (?) */
-#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS 0x00000400 /* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN 0x00000800 /* Enable interrupts when asleep */
#define AR5K_PCICFG_LED_BCTL 0x00001000 /* Led blink (?) [5210] */
-#define AR5K_PCICFG_UNK 0x00001000 /* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX 0x00001000 /* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN 0x00002000 /* Sleep even whith pending interrupts*/
#define AR5K_PCICFG_SPWR_DN 0x00010000 /* Mask for power status */
#define AR5K_PCICFG_LEDMODE 0x000e0000 /* Ledmode [5211+] */
#define AR5K_PCICFG_LEDMODE_PROP 0x00000000 /* Blink on standard traffic [5211+] */
#define AR5K_PCICFG_LEDSTATE \
(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE | \
AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate (field) */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE 0x03000000 /* Sleep clock rate */
+#define AR5K_PCICFG_SLEEP_CLOCK_RATE_S 24
/*
* "General Purpose Input/Output" (GPIO) control register
#define AR5K_GPIOCR 0x4014 /* Register Address */
#define AR5K_GPIOCR_INT_ENA 0x00008000 /* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL 0x00000000 /* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH 0x00010000 /* Generate interrupt when pin is high */
#define AR5K_GPIOCR_IN(n) (0 << ((n) * 2)) /* Mode 0 for pin n */
#define AR5K_GPIOCR_OUT0(n) (1 << ((n) * 2)) /* Mode 1 for pin n */
#define AR5K_GPIOCR_OUT1(n) (2 << ((n) * 2)) /* Mode 2 for pin n */
#define AR5K_GPIODI 0x401c
#define AR5K_GPIODI_M 0x0000002f
-
/*
* Silicon revision register
*/
#define AR5K_SREV_VER 0x000000ff /* Mask for version */
#define AR5K_SREV_VER_S 4
+/*
+ * TXE write posting register
+ */
+#define AR5K_TXEPOST 0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define AR5K_QCU_SLEEP_MASK 0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG 0x4068
+#define AR5K_5414_CBCFG_BUF_DIS 0x10 /* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define AR5K_PCIE_PM_CTL 0x4068 /* Register address */
+/* Only 5424 */
+#define AR5K_PCIE_PM_CTL_L1_WHEN_D2 0x00000001 /* enable PCIe core enter L1
+ when d2_sleep_en is asserted */
+#define AR5K_PCIE_PM_CTL_L0_L0S_CLEAR 0x00000002 /* Clear L0 and L0S counters */
+#define AR5K_PCIE_PM_CTL_L0_L0S_EN 0x00000004 /* Start L0 nd L0S counters */
+#define AR5K_PCIE_PM_CTL_LDRESET_EN 0x00000008 /* Enable reset when link goes
+ down */
+/* Wake On Wireless */
+#define AR5K_PCIE_PM_CTL_PME_EN 0x00000010 /* PME Enable */
+#define AR5K_PCIE_PM_CTL_AUX_PWR_DET 0x00000020 /* Aux power detect */
+#define AR5K_PCIE_PM_CTL_PME_CLEAR 0x00000040 /* Clear PME */
+#define AR5K_PCIE_PM_CTL_PSM_D0 0x00000080
+#define AR5K_PCIE_PM_CTL_PSM_D1 0x00000100
+#define AR5K_PCIE_PM_CTL_PSM_D2 0x00000200
+#define AR5K_PCIE_PM_CTL_PSM_D3 0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define AR5K_PCIE_WAEN 0x407c
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define AR5K_PCIE_SERDES 0x4080
+#define AR5K_PCIE_SERDES_RESET 0x4084
/*====EEPROM REGISTERS====*/
* EEPROM config register
*/
#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR 0x00000001
+#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO 0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT 2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT 3
#define AR5K_EEPROM_CFG_WR_WAIT_DIS 0x00000004 /* Disable write wait */
#define AR5K_EEPROM_CFG_CLK_RATE 0x00000018 /* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S 3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ 0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ 1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ 2
+#define AR5K_EEPROM_CFG_PROT_KEY 0x00ffff00 /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S 8
#define AR5K_EEPROM_CFG_LIND_EN 0x01000000 /* Enable length indicator (?) */
+/*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
/*
* Protocol Control Unit (PCU) registers
*/
#define AR5K_STA_ID1_DESC_ANTENNA 0x00400000 /* Update antenna from descriptor */
#define AR5K_STA_ID1_RTS_DEF_ANTENNA 0x00800000 /* Use default antenna for RTS */
#define AR5K_STA_ID1_ACKCTS_6MB 0x01000000 /* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE 0x04000000 /* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B 0x02000000 /* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT 0x04000000 /* Use def. antenna for self generated frames */
#define AR5K_STA_ID1_CRYPT_MIC_EN 0x08000000 /* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE 0x10000000 /* Look up key when key id != 0 */
#define AR5K_STA_ID1_PRESERVE_SEQ_NUM 0x20000000 /* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN 0x40000000 /* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST 0x80000000 /* Do key cache search for mcast frames */
/*
* First BSSID register (MAC address, lower 32bits)
#define AR5K_DIAG_SW_LOOP_BACK_5211 0x00000040
#define AR5K_DIAG_SW_LOOP_BACK (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210 0x00000100 /* Corrupted FCS */
#define AR5K_DIAG_SW_CORR_FCS_5211 0x00000080
#define AR5K_DIAG_SW_CORR_FCS (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210 0x00000200 /* Dump channel info */
#define AR5K_DIAG_SW_CHAN_INFO_5211 0x00000100
#define AR5K_DIAG_SW_CHAN_INFO (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200 /* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210 0x00000400 /* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211 0x00000200
#define AR5K_DIAG_SW_EN_SCRAM_SEED (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
#define AR5K_DIAG_SW_ECO_ENABLE 0x00000400 /* [5211+] */
#define AR5K_DIAG_SW_SCRAM_SEED_S 10
#define AR5K_DIAG_SW_DIS_SEQ_INC 0x00040000 /* Disable seqnum increment (?)[5210] */
#define AR5K_DIAG_SW_FRAME_NV0_5210 0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211 0x00020000 /* Accept frames of non-zero protocol number */
#define AR5K_DIAG_SW_FRAME_NV0 (ah->ah_version == AR5K_AR5210 ? \
AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M 0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M 0x000c0000 /* Observation point select (?) */
#define AR5K_DIAG_SW_OBSPT_S 18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH 0x0010000 /* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE 0x0020000 /* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH 0x0040000 /* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME 0x0080000 /* ??? */
/*
* TSF (clock) register (lower 32 bits)
*
* XXX: PCDAC steps (0.5dbm) or DBM ?
*
- * XXX: Mask changes for newer chips to 7f
- * like tx power table ?
*/
#define AR5K_TXPC 0x80e8 /* Register Address */
-#define AR5K_TXPC_ACK_M 0x0000003f /* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M 0x0000003f /* ACK tx power */
#define AR5K_TXPC_ACK_S 0
-#define AR5K_TXPC_CTS_M 0x00003f00 /* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M 0x00003f00 /* CTS tx power */
#define AR5K_TXPC_CTS_S 8
-#define AR5K_TXPC_CHIRP_M 0x003f0000 /* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S 22
+#define AR5K_TXPC_CHIRP_M 0x003f0000 /* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S 16
+#define AR5K_TXPC_DOPPLER 0x0f000000 /* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S 24
/*
* Profile count registers
#define AR5K_PROFCNT_CYCLE 0x80f8 /* Cycle count (?) */
/*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
*/
#define AR5K_QUIET_CTL1 0x80fc /* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT 0x0000ffff /* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF 0x0000ffff /* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S 0
+#define AR5K_QUIET_CTL1_QT_EN 0x00010000 /* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN 0x00020000 /* Send ACK/CTS during quiet period */
+
#define AR5K_QUIET_CTL2 0x8100 /* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER 0x0000ffff /* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S 0
+#define AR5K_QUIET_CTL2_QT_DUR 0xffff0000 /* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S 16
/*
* TSF parameter register
#define AR5K_TSF_PARM_INC_S 0
/*
- * QoS register (?)
+ * QoS NOACK policy
*/
-#define AR5K_QOS 0x8108 /* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES 0x00000000 /* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000020 /* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000080 /* (field) */
+#define AR5K_QOS_NOACK 0x8108 /* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES 0x0000000f /* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S 0
+#define AR5K_QOS_NOACK_BIT_OFFSET 0x00000070 /* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S 4
+#define AR5K_QOS_NOACK_BYTE_OFFSET 0x00000180 /* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S 8
/*
* PHY error filter register
/*
* MIC QoS control register (?)
*/
-#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
-#define AR5K_MIC_QOS_CTL_0 0x00000001 /* MIC QoS control 0 (?) */
-#define AR5K_MIC_QOS_CTL_1 0x00000004 /* MIC QoS control 1 (?) */
-#define AR5K_MIC_QOS_CTL_2 0x00000010 /* MIC QoS control 2 (?) */
-#define AR5K_MIC_QOS_CTL_3 0x00000040 /* MIC QoS control 3 (?) */
-#define AR5K_MIC_QOS_CTL_4 0x00000100 /* MIC QoS control 4 (?) */
-#define AR5K_MIC_QOS_CTL_5 0x00000400 /* MIC QoS control 5 (?) */
-#define AR5K_MIC_QOS_CTL_6 0x00001000 /* MIC QoS control 6 (?) */
-#define AR5K_MIC_QOS_CTL_7 0x00004000 /* MIC QoS control 7 (?) */
-#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
+#define AR5K_MIC_QOS_CTL 0x8118 /* Register Address */
+#define AR5K_MIC_QOS_CTL_OFF(_n) (1 << (_n * 2))
+#define AR5K_MIC_QOS_CTL_MQ_EN 0x00010000 /* Enable MIC QoS */
/*
* MIC QoS select register (?)
*/
-#define AR5K_MIC_QOS_SEL 0x811c
-#define AR5K_MIC_QOS_SEL_0 0x00000001
-#define AR5K_MIC_QOS_SEL_1 0x00000010
-#define AR5K_MIC_QOS_SEL_2 0x00000100
-#define AR5K_MIC_QOS_SEL_3 0x00001000
-#define AR5K_MIC_QOS_SEL_4 0x00010000
-#define AR5K_MIC_QOS_SEL_5 0x00100000
-#define AR5K_MIC_QOS_SEL_6 0x01000000
-#define AR5K_MIC_QOS_SEL_7 0x10000000
+#define AR5K_MIC_QOS_SEL 0x811c
+#define AR5K_MIC_QOS_SEL_OFF(_n) (1 << (_n * 4))
/*
* Misc mode control register (?)
*/
#define AR5K_TSF_THRES 0x813c
+/*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
/*
* Rate -> ACK SIFS mapping table (32 entries)
*/
*/
#define AR5K_PHY_TURBO 0x9804 /* Register Address */
#define AR5K_PHY_TURBO_MODE 0x00000001 /* Enable turbo mode */
-#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Short mode (20Mhz channels) (?) */
+#define AR5K_PHY_TURBO_SHORT 0x00000002 /* Set short symbols to turbo mode */
+#define AR5K_PHY_TURBO_MIMO 0x00000004 /* Set turbo for mimo mimo */
/*
* PHY agility command register
#define AR5K_PHY_TST1 0x9808
#define AR5K_PHY_AGC_DISABLE 0x08000000 /* Disable AGC to A2 (?)*/
#define AR5K_PHY_TST1_TXHOLD 0x00003800 /* Set tx hold (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC 0x00000002 /* Used with bit 7 (?) */
+#define AR5K_PHY_TST1_TXSRC_SRC_S 1
+#define AR5K_PHY_TST1_TXSRC_ALT 0x00000080 /* Set input to tsdac (?) */
+#define AR5K_PHY_TST1_TXSRC_ALT_S 7
+
/*
* PHY timing register 3 [5112+]
/*
* PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
*/
#define AR5K_PHY_RF_CTL2 0x9824 /* Register Address */
-#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* Mask for TX frame to TX d(esc?) start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START 0x0000000f /* TX frame to TX data start */
+#define AR5K_PHY_RF_CTL2_TXF2TXD_START_S 0
#define AR5K_PHY_RF_CTL3 0x9828 /* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON 0x0000000f /* TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S 0
+
+#define AR5K_PHY_ADC_CTL 0x982c
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF 0x00000003
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S 0
+#define AR5K_PHY_ADC_CTL_PWD_DAC_OFF 0x00002000
+#define AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF 0x00004000
+#define AR5K_PHY_ADC_CTL_PWD_ADC_OFF 0x00008000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON 0x00030000
+#define AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S 16
#define AR5K_PHY_RF_CTL4 0x9834 /* Register Address */
#define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON 0x00000001 /* TX frame to XPA A on (field) */
* PHY settling register
*/
#define AR5K_PHY_SETTLING 0x9844 /* Register Address */
-#define AR5K_PHY_SETTLING_AGC 0x0000007f /* Mask for AGC settling time */
-#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Mask for Switch settlig time */
+#define AR5K_PHY_SETTLING_AGC 0x0000007f /* AGC settling time */
+#define AR5K_PHY_SETTLING_AGC_S 0
+#define AR5K_PHY_SETTLING_SWITCH 0x00003f80 /* Switch settlig time */
+#define AR5K_PHY_SETTLINK_SWITCH_S 7
/*
* PHY Gain registers
*/
#define AR5K_PHY_GAIN 0x9848 /* Register Address */
-#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* Mask for TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN 0x0003f000 /* TX-RX Attenuation */
+#define AR5K_PHY_GAIN_TXRX_ATTEN_S 12
+#define AR5K_PHY_GAIN_TXRX_RF_MAX 0x007c0000
+#define AR5K_PHY_GAIN_TXRX_RF_MAX_S 18
#define AR5K_PHY_GAIN_OFFSET 0x984c /* Register Address */
#define AR5K_PHY_GAIN_OFFSET_RXTX_FLAG 0x00020000 /* RX-TX flag (?) */
* (for more infos read ANI patent)
*/
#define AR5K_PHY_DESIRED_SIZE 0x9850 /* Register Address */
-#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* Mask for ADC desired size */
-#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* Mask for PGA desired size */
-#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Mask for Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC 0x000000ff /* ADC desired size */
+#define AR5K_PHY_DESIRED_SIZE_ADC_S 0
+#define AR5K_PHY_DESIRED_SIZE_PGA 0x0000ff00 /* PGA desired size */
+#define AR5K_PHY_DESIRED_SIZE_PGA_S 8
+#define AR5K_PHY_DESIRED_SIZE_TOT 0x0ff00000 /* Total desired size */
+#define AR5K_PHY_DESIRED_SIZE_TOT_S 20
/*
* PHY signal register
* (for more infos read ANI patent)
*/
#define AR5K_PHY_SIG 0x9858 /* Register Address */
-#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* Mask for FIRSTEP */
+#define AR5K_PHY_SIG_FIRSTEP 0x0003f000 /* FIRSTEP */
#define AR5K_PHY_SIG_FIRSTEP_S 12
-#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* Mask for FIPWR */
+#define AR5K_PHY_SIG_FIRPWR 0x03fc0000 /* FIPWR */
#define AR5K_PHY_SIG_FIRPWR_S 18
/*
* (for more infos read ANI patent)
*/
#define AR5K_PHY_AGCCOARSE 0x985c /* Register Address */
-#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* Mask for AGC Coarse low */
+#define AR5K_PHY_AGCCOARSE_LO 0x00007f80 /* AGC Coarse low */
#define AR5K_PHY_AGCCOARSE_LO_S 7
-#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* Mask for AGC Coarse high */
+#define AR5K_PHY_AGCCOARSE_HI 0x003f8000 /* AGC Coarse high */
#define AR5K_PHY_AGCCOARSE_HI_S 15
/*
#define AR5K_PHY_AGCCTL 0x9860 /* Register address */
#define AR5K_PHY_AGCCTL_CAL 0x00000001 /* Enable PHY calibration */
#define AR5K_PHY_AGCCTL_NF 0x00000002 /* Enable Noise Floor calibration */
+#define AR5K_PHY_AGCCTL_NF_EN 0x00008000 /* Enable nf calibration to happen (?) */
+#define AR5K_PHY_AGCCTL_NF_NOUPDATE 0x00020000 /* Don't update nf automaticaly */
/*
* PHY noise floor status register
#define AR5K_PHY_NF_RVAL(_n) (((_n) >> 19) & AR5K_PHY_NF_M)
#define AR5K_PHY_NF_AVAL(_n) (-((_n) ^ AR5K_PHY_NF_M) + 1)
#define AR5K_PHY_NF_SVAL(_n) (((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define AR5K_PHY_NF_THRESH62 0x00001000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62 0x0007f000 /* Thresh62 -check ANI patent- (field) */
+#define AR5K_PHY_NF_THRESH62_S 12
+#define AR5K_PHY_NF_MINCCA_PWR 0x0ff80000 /* ??? */
+#define AR5K_PHY_NF_MINCCA_PWR_S 19
/*
* PHY ADC saturation register [5110]
*/
#define AR5K_PHY_SCR 0x9870
#define AR5K_PHY_SCR_32MHZ 0x0000001f
+
#define AR5K_PHY_SLMT 0x9874
#define AR5K_PHY_SLMT_32MHZ 0x0000007f
+
#define AR5K_PHY_SCAL 0x9878
#define AR5K_PHY_SCAL_32MHZ 0x0000000e
+
/*
* PHY PLL (Phase Locked Loop) control register
*/
#define AR5K_PHY_PLL 0x987c
-#define AR5K_PHY_PLL_20MHZ 0x13 /* For half rate (?) [5111+] */
-#define AR5K_PHY_PLL_40MHZ_5211 0x18 /* For 802.11a */
+#define AR5K_PHY_PLL_20MHZ 0x00000013 /* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define AR5K_PHY_PLL_40MHZ_5211 0x00000018
#define AR5K_PHY_PLL_40MHZ_5212 0x000000aa
+#define AR5K_PHY_PLL_40MHZ_5413 0x00000004
#define AR5K_PHY_PLL_40MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define AR5K_PHY_PLL_44MHZ_5211 0x19 /* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define AR5K_PHY_PLL_44MHZ_5211 0x00000019
#define AR5K_PHY_PLL_44MHZ_5212 0x000000ab
#define AR5K_PHY_PLL_44MHZ (ah->ah_version == AR5K_AR5211 ? \
AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
#define AR5K_PHY_PLL_RF5111 0x00000000
#define AR5K_PHY_PLL_RF5112 0x00000040
#define AR5K_PHY_PLL_HALF_RATE 0x00000100
#define AR5K_PHY_RFSTG 0x98d4
#define AR5K_PHY_RFSTG_DISABLE 0x00000021
+/*
+ * BIN masks (?)
+ */
+#define AR5K_PHY_BIN_MASK_1 0x9900
+#define AR5K_PHY_BIN_MASK_2 0x9904
+#define AR5K_PHY_BIN_MASK_3 0x9908
+
+#define AR5K_PHY_BIN_MASK_CTL 0x990c
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK_CTL_MASK_4_S 0
+#define AR5K_PHY_BIN_MASK_CTL_RATE 0xff000000
+#define AR5K_PHY_BIN_MASK_CTL_RATE_S 24
+
/*
* PHY Antenna control register
*/
#define AR5K_PHY_OFDM_SELFCORR 0x9924 /* Register Address */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN 0x00000001 /* Enable cyclic RSSI thr 1 */
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1 0x000000fe /* Mask for Cyclic RSSI threshold 1 */
+#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S 0
#define AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3 0x00000100 /* Cyclic RSSI threshold 3 (field) (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN 0x00008000 /* Enable 1A RSSI threshold (?) */
#define AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR 0x00010000 /* 1A RSSI threshold (field) (?) */
#define AR5K_PHY_PAPD_PROBE_INI_5111 0x00004883 /* [5212+] */
#define AR5K_PHY_PAPD_PROBE_INI_5112 0x00004882 /* [5212+] */
-
/*
* PHY TX rate power registers [5112+]
*/
#define AR5K_PHY_FRAME_CTL_TX_CLIP 0x00000038 /* Mask for tx clip (?) */
#define AR5K_PHY_FRAME_CTL_TX_CLIP_S 3
#define AR5K_PHY_FRAME_CTL_PREP_CHINFO 0x00010000 /* Prepend chan info */
+#define AR5K_PHY_FRAME_CTL_EMU 0x80000000
+#define AR5K_PHY_FRAME_CTL_EMU_S 31
/*---[5110/5111]---*/
#define AR5K_PHY_FRAME_CTL_TIMING_ERR 0x01000000 /* PHY timing error */
#define AR5K_PHY_FRAME_CTL_PARITY_ERR 0x02000000 /* Parity error */
* PHY radar detection register [5111+]
*/
#define AR5K_PHY_RADAR 0x9954
-
-/* Radar enable ........ ........ ........ .......1 */
#define AR5K_PHY_RADAR_ENABLE 0x00000001
-#define AR5K_PHY_RADAR_DISABLE 0x00000000
-#define AR5K_PHY_RADAR_ENABLE_S 0
-
-/* This is the value found on the card .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define AR5K_PHY_RADAR_PWONDEF_AR5213 0x5d50e188
-
-/* This is the value found on the card .1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define AR5K_PHY_RADAR_ENABLED_AR5213 0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR 0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S 24
-
-/* Radar RSSI/SNR threshold. ........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR 0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S 18
-
-/* Pulse height threshold ........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR 0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S 12
-
-/* Pulse RSSI/SNR threshold ........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR 0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S 6
-
-/* Inband threshold ........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e
+#define AR5K_PHY_RADAR_DISABLE 0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR 0x0000003e /* Inband threshold
+ 5-bits, units unknown {0..31}
+ (? MHz ?) */
#define AR5K_PHY_RADAR_INBANDTHR_S 1
+#define AR5K_PHY_RADAR_PRSSI_THR 0x00000fc0 /* Pulse RSSI/SNR threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S 6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR 0x0003f000 /* Pulse height threshold
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S 12
+
+#define AR5K_PHY_RADAR_RSSI_THR 0x00fc0000 /* Radar RSSI/SNR threshold.
+ 6-bits, dBm range {0..63}
+ in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S 18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR 0x7f000000 /* Finite Impulse Response
+ filter power out threshold.
+ 7-bits, standard power range
+ {0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS 24
+
/*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
*/
#define AR5K_PHY_ANT_SWITCH_TABLE_0 0x9960
#define AR5K_PHY_ANT_SWITCH_TABLE_1 0x9964
#define AR5K_PHY_NFTHRES 0x9968
/*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
*/
-#define AR5K_PHY_SCLOCK 0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
-#define AR5K_PHY_SDELAY 0x99f4
-#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
-#define AR5K_PHY_SPENDING 0x99f8
-#define AR5K_PHY_SPENDING_14 0x00000014
-#define AR5K_PHY_SPENDING_18 0x00000018
-#define AR5K_PHY_SPENDING_RF5111 0x00000018
-#define AR5K_PHY_SPENDING_RF5112 0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
-#define AR5K_PHY_SPENDING_RF5413 0x00000014
-#define AR5K_PHY_SPENDING_RF2413 0x00000014
-#define AR5K_PHY_SPENDING_RF2425 0x00000018
+#define AR5K_PHY_SIGMA_DELTA 0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL 0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S 0
+#define AR5K_PHY_SIGMA_DELTA_FILT2 0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S 3
+#define AR5K_PHY_SIGMA_DELTA_FILT1 0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S 8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP 0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S 13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART 0x9970 /* restart */
+#define AR5K_PHY_RESTART_DIV_GC 0x001c0000 /* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S 18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ 0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST 0x00000001
/*
- * Misc PHY/radio registers [5110 - 5111]
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7 0x9980
+#define AR5K_PHY_TIMING_8 0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2 0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S 0
+
+#define AR5K_PHY_BIN_MASK2_1 0x9988
+#define AR5K_PHY_BIN_MASK2_2 0x998c
+#define AR5K_PHY_BIN_MASK2_3 0x9990
+
+#define AR5K_PHY_BIN_MASK2_4 0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4 0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S 0
+
+#define AR_PHY_TIMING_9 0x9998
+#define AR_PHY_TIMING_10 0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2 0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S 0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11 0x99a0 /* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE 0x000fffff /* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S 0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD 0x3ff00000 /* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S 20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC 0x40000000 /* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR 0x80000000 /* Spur filter in OFDM self correlator */
+
+/*
+ * Gain tables
*/
#define AR5K_BB_GAIN_BASE 0x9b00 /* BaseBand Amplifier Gain table base address */
#define AR5K_BB_GAIN(_n) (AR5K_BB_GAIN_BASE + ((_n) << 2))
#define AR5K_PHY_CURRENT_RSSI 0x9c1c
/*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
*/
#define AR5K_PHY_RFBUS_GRANT 0x9c20
+#define AR5K_PHY_RFBUS_GRANT_OK 0x00000001
/*
* PHY ADC test register
#define AR5K_PHY_CHAN_STATUS_RX_CLR_MAC 0x00000004
#define AR5K_PHY_CHAN_STATUS_RX_CLR_PAP 0x00000008
+/*
+ * Heavy clip enable register
+ */
+#define AR5K_PHY_HEAVY_CLIP_ENABLE 0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK 0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ 0x0000000c
+#define AR5K_PHY_SDELAY 0x99f4
+#define AR5K_PHY_SDELAY_32MHZ 0x000000ff
+#define AR5K_PHY_SPENDING 0x99f8
+#define AR5K_PHY_SPENDING_14 0x00000014
+#define AR5K_PHY_SPENDING_18 0x00000018
+#define AR5K_PHY_SPENDING_RF5111 0x00000018
+#define AR5K_PHY_SPENDING_RF5112 0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A 0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424 0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413 0x00000018
+#define AR5K_PHY_SPENDING_RF2413 0x00000018
+#define AR5K_PHY_SPENDING_RF2316 0x00000018
+#define AR5K_PHY_SPENDING_RF2317 0x00000018
+#define AR5K_PHY_SPENDING_RF2425 0x00000014
+
/*
* PHY PAPD I (power?) table (?)
* (92! entries)
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR 0x0000000f
#define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S 0
+/* Same address is used for antenna diversity activation */
+#define AR5K_PHY_FAST_ANT_DIV 0xa208
+#define AR5K_PHY_FAST_ANT_DIV_EN 0x00002000
+
/*
* PHY 2GHz gain register [5111+]
*/
-#define AR5K_PHY_GAIN_2GHZ 0xa20c
-#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
+#define AR5K_PHY_GAIN_2GHZ 0xa20c
+#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX 0x00fc0000
#define AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S 18
-#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+#define AR5K_PHY_GAIN_2GHZ_INI_5111 0x6480416c
+
+#define AR5K_PHY_CCK_RX_CTL_4 0xa21c
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT 0x01f80000
+#define AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S 19
+
+#define AR5K_PHY_DAG_CCK_CTL 0xa228
+#define AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR 0x00000200
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR 0x0001fc00
+#define AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S 10
+
+#define AR5K_PHY_FAST_ADC 0xa24c
+
+#define AR5K_PHY_BLUETOOTH 0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define AR5K_PHY_TPC_RG1 0xa258
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN 0x0000c000
+#define AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S 14
+
+#define AR5K_PHY_TPC_RG5 0xa26C
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP 0x0000000F
+#define AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S 0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1 0x000003F0
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S 4
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2 0x0000FC00
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S 10
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3 0x003F0000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S 16
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4 0x0FC00000
+#define AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S 22
ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
if (channel->hw_value == CHANNEL_G)
- if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
+ if (ah->ah_mac_srev < AR5K_SREV_AR2413)
ath5k_hw_reg_write(ah, 0x00f80d80,
0x994c);
- else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
+ else if (ah->ah_mac_srev < AR5K_SREV_AR5424)
ath5k_hw_reg_write(ah, 0x00380140,
0x994c);
- else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
+ else if (ah->ah_mac_srev < AR5K_SREV_AR2425)
ath5k_hw_reg_write(ah, 0x00fc0ec0,
0x994c);
else /* 2425 */
ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
- if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
+ if (ah->ah_mac_srev >= AR5K_SREV_AR2413)
ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
}
break;
udelay(10);
}
- for (i = 0x00; i < 0x0A; i++) {
+ for (i = 0x00; i < 0x19; i++) {
value = b43_read16(dev, 0x0690);
if (!(value & 0x0100))
break;
pdev = bus->host_pci;
if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, HP, 0x12f8) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
- IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
+ IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, MOTOROLA, 0x7010))
bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
}
}
goto out;
}
+ if (conf->flags & IEEE80211_CONF_PS)
+ ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
+ else
+ ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+ if (ret)
+ IWL_DEBUG_MAC80211("Error setting power level\n");
+
IWL_DEBUG_MAC80211("TX Power old=%d new=%d\n",
priv->tx_power_user_lmt, conf->power_level);
pci_set_master(pdev);
- err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
if (err) {
- err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
/* both attempts failed: */
if (err) {
printk(KERN_WARNING "%s: No suitable DMA available.\n",
#define CSR_BASE (0x000)
#define CSR_HW_IF_CONFIG_REG (CSR_BASE+0x000) /* hardware interface config */
-#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
+#define CSR_INT_COALESCING (CSR_BASE+0x004) /* accum ints, 32-usec units */
#define CSR_INT (CSR_BASE+0x008) /* host interrupt status/ack */
#define CSR_INT_MASK (CSR_BASE+0x00c) /* host interrupt enable */
#define CSR_FH_INT_STATUS (CSR_BASE+0x010) /* busmaster int status/ack*/
#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */
#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/
-#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT (20)
-#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_BITSHIFT (4)
+#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20)
+#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4)
#define RX_RB_TIMEOUT (0x10)
#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000)
#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000)
-#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
-#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
+#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004)
+#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000)
+#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000)
/**
{
int ret;
unsigned long flags;
- unsigned int rb_size;
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ const u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT why this stalls RX */
spin_lock_irqsave(&priv->lock, flags);
ret = iwl_grab_nic_access(priv);
/* Tell device where to find RBD circular buffer in DRAM */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- rxq->dma_addr >> 8);
+ (u32)(rxq->dma_addr >> 8));
/* Tell device where in DRAM to update its Rx status */
iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
(priv->shared_phys + priv->rb_closed_offset) >> 4);
- /* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
+ /* Enable Rx DMA
+ * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set becuase of HW bug in
+ * the credit mechanism in 5000 HW RX FIFO
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- rb_size |
- /* 0x10 << 4 | */
- (RX_QUEUE_SIZE_LOG <<
- FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
-
- /*
- * iwl_write32(priv,CSR_INT_COAL_REG,0);
- */
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
iwl_release_nic_access(priv);
+
+ iwl_write32(priv, CSR_INT_COALESCING, 0x40);
+
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
cmd.hdr.size = cpu_to_le16(sizeof(cmd));
cmd.action = cpu_to_le16(CMD_ACT_SET);
cmd.enable = !!enable;
- cmd.usesnr = !!enable;
+ cmd.usesnr = !!usesnr;
cmd.P0 = p0;
cmd.P1 = p1;
cmd.P2 = p2;
int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
int8_t p2, int usesnr);
+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+ int8_t p1, int8_t p2);
+
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+ int8_t p2, int usesnr);
+
int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
struct cmd_header *resp);
#define MRVDRV_CMD_UPLD_RDY 0x0008
#define MRVDRV_CARDEVENT 0x0010
-
/* Automatic TX control default levels */
#define POW_ADAPT_DEFAULT_P0 13
#define POW_ADAPT_DEFAULT_P1 15
new_rate);
goto out;
}
+ if (priv->fwrelease < 0x09000000) {
+ ret = lbs_set_power_adapt_cfg(priv, 0,
+ POW_ADAPT_DEFAULT_P0,
+ POW_ADAPT_DEFAULT_P1,
+ POW_ADAPT_DEFAULT_P2);
+ if (ret)
+ goto out;
+ }
+ ret = lbs_set_tpc_cfg(priv, 0, TPC_DEFAULT_P0, TPC_DEFAULT_P1,
+ TPC_DEFAULT_P2, 1);
+ if (ret)
+ goto out;
}
/* Try the newer command first (Firmware Spec 5.1 and above) */
u32 code = le32_to_cpu(bootrec->code);
switch (code) {
case BR_CODE_COMPONENT_ID:
- priv->fw_interface = be32_to_cpup(bootrec->data);
+ priv->fw_interface = be32_to_cpup((__be32 *)
+ bootrec->data);
switch (priv->fw_interface) {
case FW_FMAC:
printk(KERN_INFO "p54: FreeMAC firmware\n");
priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500;
priv->headroom = desc->headroom;
priv->tailroom = desc->tailroom;
- if (bootrec->len == 11)
- priv->rx_mtu = (size_t) le16_to_cpu(
- (__le16)bootrec->data[10]);
+ if (le32_to_cpu(bootrec->len) == 11)
+ priv->rx_mtu = le16_to_cpu(bootrec->rx_mtu);
else
priv->rx_mtu = (size_t)
0x620 - priv->tx_hdr_len;
return 0;
}
-const char* p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
+static const char *p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
"Frisbee", "Xbow", "Longbow" };
static int p54_init_xbow_synth(struct ieee80211_hw *dev);
-int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
+static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
{
struct p54_common *priv = dev->priv;
struct eeprom_pda_wrap *wrap = NULL;
if (!priv->eeprom)
return ;
- memcpy(priv->eeprom, eeprom->data, eeprom->len);
+ memcpy(priv->eeprom, eeprom->data, le16_to_cpu(eeprom->len));
complete(&priv->eeprom_comp);
}
hdr->len = cpu_to_le16(blocksize + sizeof(*eeprom_hdr));
eeprom_hdr->offset = cpu_to_le16(offset);
eeprom_hdr->len = cpu_to_le16(blocksize);
- p54_assign_address(dev, NULL, hdr, hdr->len + sizeof(*hdr));
- priv->tx(dev, hdr, hdr->len + sizeof(*hdr), 0);
+ p54_assign_address(dev, NULL, hdr, le16_to_cpu(hdr->len) +
+ sizeof(*hdr));
+ priv->tx(dev, hdr, le16_to_cpu(hdr->len) + sizeof(*hdr), 0);
if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) {
printk(KERN_ERR "%s: device does not respond!\n",
if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
- p54_set_filter(dev, priv->filter_type, NULL);
+ p54_set_filter(dev, le16_to_cpu(priv->filter_type),
+ NULL);
else
- p54_set_filter(dev, priv->filter_type, priv->bssid);
+ p54_set_filter(dev, le16_to_cpu(priv->filter_type),
+ priv->bssid);
}
if (changed_flags & FIF_PROMISC_IN_BSS) {
if (*total_flags & FIF_PROMISC_IN_BSS)
- p54_set_filter(dev, priv->filter_type |
- cpu_to_le16(0x8), NULL);
+ p54_set_filter(dev, le16_to_cpu(priv->filter_type) |
+ 0x8, NULL);
else
- p54_set_filter(dev, priv->filter_type &
- ~cpu_to_le16(0x8), priv->bssid);
+ p54_set_filter(dev, le16_to_cpu(priv->filter_type) &
+ ~0x8, priv->bssid);
}
}
struct bootrec {
__le32 code;
__le32 len;
- u32 data[0];
+ u32 data[10];
+ __le16 rx_mtu;
} __attribute__((packed));
struct bootrec_exp_if {
usb_submit_urb(data_urb, GFP_ATOMIC);
}
-__le32 p54u_lm87_chksum(const u32 *data, size_t length)
+static __le32 p54u_lm87_chksum(const u32 *data, size_t length)
{
- __le32 chk = 0;
+ u32 chk = 0;
length >>= 2;
while (length--) {
- chk ^= cpu_to_le32(*data++);
+ chk ^= *data++;
chk = (chk >> 5) ^ (chk << 3);
}
- return chk;
+ return cpu_to_le32(chk);
}
static void p54u_tx_lm87(struct ieee80211_hw *dev,
-config RT2X00
- tristate "Ralink driver support"
+menuconfig RT2X00
+ bool "Ralink driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable the experimental support for the Ralink drivers,
if RT2X00
-config RT2X00_LIB
- tristate
-
-config RT2X00_LIB_PCI
- tristate
- select RT2X00_LIB
-
-config RT2X00_LIB_USB
- tristate
- select RT2X00_LIB
-
-config RT2X00_LIB_FIRMWARE
- boolean
- depends on RT2X00_LIB
- select FW_LOADER
-
-config RT2X00_LIB_CRYPTO
- boolean
- depends on RT2X00_LIB
-
-config RT2X00_LIB_RFKILL
- boolean
- depends on RT2X00_LIB
- depends on RFKILL
- default y
-
-config RT2X00_LIB_LEDS
- boolean
- depends on RT2X00_LIB
- depends on NEW_LEDS
- depends on LEDS_CLASS
- default y
-
config RT2400PCI
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
When compiled as a module, this driver will be called "rt73usb.ko".
+config RT2X00_LIB_PCI
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB_USB
+ tristate
+ select RT2X00_LIB
+
+config RT2X00_LIB
+ tristate
+
+config RT2X00_LIB_FIRMWARE
+ boolean
+ select FW_LOADER
+
+config RT2X00_LIB_CRYPTO
+ boolean
+
+config RT2X00_LIB_RFKILL
+ boolean
+ default y if (RT2X00_LIB=y && RFKILL=y) || (RT2X00_LIB=m && RFKILL!=n)
+
+comment "rt2x00 rfkill support disabled due to modularized RFKILL and built-in rt2x00"
+ depends on RT2X00_LIB=y && RFKILL=m
+
+config RT2X00_LIB_LEDS
+ boolean
+ default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
+
+comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
+ depends on RT2X00_LIB=y && LEDS_CLASS=m
+
config RT2X00_LIB_DEBUGFS
bool "Ralink debugfs support"
depends on RT2X00_LIB && MAC80211_DEBUGFS
#endif
#include <net/iw_handler.h> /* new driver API */
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
#ifndef ETH_P_80211_RAW
static int ieee80211_open(struct net_device *dev)
{
- struct ieee80211_sub_if_data *sdata, *nsdata;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_sub_if_data *nsdata;
+ struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
struct ieee80211_if_init_conf conf;
u32 changed = 0;
bool need_hw_reconfig = 0;
u8 null_addr[ETH_ALEN] = {0};
- sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-
/* fail early if user set an invalid address */
if (compare_ether_addr(dev->dev_addr, null_addr) &&
!is_valid_ether_addr(dev->dev_addr))
static void ieee80211_set_multicast_list(struct net_device *dev)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_local *local = sdata->local;
int allmulti, promisc, sdata_allmulti, sdata_promisc;
allmulti = !!(dev->flags & IFF_ALLMULTI);
return RX_QUEUED;
}
-static ieee80211_rx_result debug_noinline
+static ieee80211_rx_result
ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
{
struct ieee80211_hdr *hdr;
* @last_qual: qual of last received frame from this STA
* @last_noise: noise of last received frame from this STA
* @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
- * @wme_rx_queue: TBD
* @tx_filtered_count: TBD
* @tx_retry_failed: TBD
* @tx_retry_count: TBD
* @tx_fragments: number of transmitted MPDUs
* @last_txrate_idx: Index of the last used transmit rate
* @tid_seq: TBD
- * @wme_tx_queue: TBD
* @ampdu_mlme: TBD
* @timer_to_tid: identity mapping to ID timers
* @tid_to_tx_q: map tid to tx queue
int last_qual;
int last_noise;
__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
- unsigned int wme_rx_queue[NUM_RX_DATA_QUEUES];
-#endif
/* Updated from TX status path only, no locking requirements */
unsigned long tx_filtered_count;
unsigned long tx_fragments;
unsigned int last_txrate_idx;
u16 tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1];
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
- unsigned int wme_tx_queue[NUM_RX_DATA_QUEUES];
-#endif
/*
* Aggregation information, locked with lock.
struct dentry *num_ps_buf_frames;
struct dentry *inactive_ms;
struct dentry *last_seq_ctrl;
-#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
- struct dentry *wme_rx_queue;
- struct dentry *wme_tx_queue;
-#endif
struct dentry *agg_status;
} debugfs;
#endif
/* Indicate which queue to use. */
-static u16 classify80211(struct sk_buff *skb, struct net_device *dev)
+static u16 classify80211(struct ieee80211_local *local, struct sk_buff *skb)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
if (!ieee80211_is_data(hdr->frame_control)) {
u16 ieee80211_select_queue(struct net_device *dev, struct sk_buff *skb)
{
+ struct ieee80211_master_priv *mpriv = netdev_priv(dev);
+ struct ieee80211_local *local = mpriv->local;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct sta_info *sta;
u16 queue;
u8 tid;
- queue = classify80211(skb, dev);
+ queue = classify80211(local, skb);
if (unlikely(queue >= local->hw.queues))
queue = local->hw.queues - 1;
projects / linux-2.6-omap-h63xx.git / commitdiff