]> www.pilppa.org Git - linux-2.6-omap-h63xx.git/commitdiff
include/asm-x86/mca_dma.h: checkpatch cleanups - formatting only
authorJoe Perches <joe@perches.com>
Sun, 23 Mar 2008 08:02:41 +0000 (01:02 -0700)
committerIngo Molnar <mingo@elte.hu>
Thu, 17 Apr 2008 15:41:25 +0000 (17:41 +0200)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
include/asm-x86/mca_dma.h

index fbb1f3b71279d5da826870b3186e53bd3e463a65..c3dca6edc6b1b82c3a252c4b005abc77106100d8 100644 (file)
  *   count by 2 when using 16-bit dma; that is not handled by these functions.
  *
  * Ramen Noodles are yummy.
- * 
- *  1998 Tymm Twillman <tymm@computer.org>  
+ *
+ *  1998 Tymm Twillman <tymm@computer.org>
  */
 
 /*
- * Registers that are used by the DMA controller; FN is the function register 
+ * Registers that are used by the DMA controller; FN is the function register
  *   (tell the controller what to do) and EXE is the execution register (how
  *   to do it)
  */
 
 #define MCA_DMA_REG_FN  0x18
-#define MCA_DMA_REG_EXE 0x1A 
+#define MCA_DMA_REG_EXE 0x1A
 
 /*
  * Functions that the DMA controller can do
@@ -43,9 +43,9 @@
 
 /*
  * Modes (used by setting MCA_DMA_FN_MODE in the function register)
- * 
+ *
  * Note that the MODE_READ is read from memory (write to device), and
- *   MODE_WRITE is vice-versa.  
+ *   MODE_WRITE is vice-versa.
  */
 
 #define MCA_DMA_MODE_XFER  0x04  /* read by default */
@@ -63,7 +63,7 @@
  *     IRQ context.
  */
 
-static __inline__ void mca_enable_dma(unsigned int dmanr)
+static inline void mca_enable_dma(unsigned int dmanr)
 {
        outb(MCA_DMA_FN_RESET_MASK | dmanr, MCA_DMA_REG_FN);
 }
@@ -76,7 +76,7 @@ static __inline__ void mca_enable_dma(unsigned int dmanr)
  *     IRQ context.
  */
 
-static __inline__ void mca_disable_dma(unsigned int dmanr)
+static inline void mca_disable_dma(unsigned int dmanr)
 {
        outb(MCA_DMA_FN_MASK | dmanr, MCA_DMA_REG_FN);
 }
@@ -87,10 +87,10 @@ static __inline__ void mca_disable_dma(unsigned int dmanr)
  *     @a: 24bit bus address
  *
  *     Load the address register in the DMA controller. This has a 24bit
- *     limitation (16Mb). 
+ *     limitation (16Mb).
  */
 
-static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
+static inline void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
 {
        outb(MCA_DMA_FN_SET_ADDR | dmanr, MCA_DMA_REG_FN);
        outb(a & 0xff, MCA_DMA_REG_EXE);
@@ -106,14 +106,14 @@ static __inline__ void mca_set_dma_addr(unsigned int dmanr, unsigned int a)
  *     limitation (16Mb). The return is a bus address.
  */
 
-static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr)
+static inline unsigned int mca_get_dma_addr(unsigned int dmanr)
 {
        unsigned int addr;
 
        outb(MCA_DMA_FN_GET_ADDR | dmanr, MCA_DMA_REG_FN);
        addr = inb(MCA_DMA_REG_EXE);
        addr |= inb(MCA_DMA_REG_EXE) << 8;
-       addr |= inb(MCA_DMA_REG_EXE) << 16;  
+       addr |= inb(MCA_DMA_REG_EXE) << 16;
 
        return addr;
 }
@@ -127,7 +127,7 @@ static __inline__ unsigned int mca_get_dma_addr(unsigned int dmanr)
  *     Setting a count of zero will not do what you expect.
  */
 
-static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count)
+static inline void mca_set_dma_count(unsigned int dmanr, unsigned int count)
 {
        count--;  /* transfers one more than count -- correct for this */
 
@@ -144,7 +144,7 @@ static __inline__ void mca_set_dma_count(unsigned int dmanr, unsigned int count)
  *     on this DMA channel.
  */
 
-static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr)
+static inline unsigned int mca_get_dma_residue(unsigned int dmanr)
 {
        unsigned short count;
 
@@ -164,12 +164,12 @@ static __inline__ unsigned int mca_get_dma_residue(unsigned int dmanr)
  *     with an I/O port target.
  */
 
-static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
+static inline void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
 {
        /*
         * DMA from a port address -- set the io address
         */
-       
+
        outb(MCA_DMA_FN_SET_IO | dmanr, MCA_DMA_REG_FN);
        outb(io_addr & 0xff, MCA_DMA_REG_EXE);
        outb((io_addr >>  8) & 0xff, MCA_DMA_REG_EXE);
@@ -192,7 +192,7 @@ static __inline__ void mca_set_dma_io(unsigned int dmanr, unsigned int io_addr)
  *     %MCA_DMA_MODE_16 to do 16bit transfers.
  */
 
-static __inline__ void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
+static inline void mca_set_dma_mode(unsigned int dmanr, unsigned int mode)
 {
        outb(MCA_DMA_FN_SET_MODE | dmanr, MCA_DMA_REG_FN);
        outb(mode, MCA_DMA_REG_EXE);