config IDE_ATAPI
bool
+config IDE_LEGACY
+ bool
+
config BLK_DEV_IDE_SATA
bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
default n
config BLK_DEV_ALI14XX
tristate "ALI M14xx support"
select IDE_TIMINGS
+ select IDE_LEGACY
help
This driver is enabled at runtime using the "ali14xx.probe" kernel
boot parameter. It enables support for the secondary IDE interface
config BLK_DEV_DTC2278
tristate "DTC-2278 support"
+ select IDE_LEGACY
help
This driver is enabled at runtime using the "dtc2278.probe" kernel
boot parameter. It enables support for the secondary IDE interface
config BLK_DEV_HT6560B
tristate "Holtek HT6560B support"
select IDE_TIMINGS
+ select IDE_LEGACY
help
This driver is enabled at runtime using the "ht6560b.probe" kernel
boot parameter. It enables support for the secondary IDE interface
config BLK_DEV_QD65XX
tristate "QDI QD65xx support"
select IDE_TIMINGS
+ select IDE_LEGACY
help
This driver is enabled at runtime using the "qd65xx.probe" kernel
boot parameter. It permits faster I/O speeds to be set. See the
config BLK_DEV_UMC8672
tristate "UMC-8672 support"
+ select IDE_LEGACY
help
This driver is enabled at runtime using the "umc8672.probe" kernel
boot parameter. It enables support for the secondary IDE interface
EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-park.o ide-pio-blacklist.o
+ ide-taskfile.o ide-pm.o ide-park.o ide-pio-blacklist.o
# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
+ide-core-$(CONFIG_IDE_LEGACY) += ide-legacy.o
obj-$(CONFIG_IDE) += ide-core.o
.name = DRV_NAME,
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .chipset = ide_cmd646,
.port_ops = &cmd64x_port_ops,
.dma_ops = &cmd648_dma_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_ABUSE_PREFETCH,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
.name = DRV_NAME,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
- .chipset = ide_cy82c693,
.host_flags = IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.swdma_mask = ATA_SWDMA2,
hw->chipset = ide_generic;
}
+static const struct ide_port_info gayle_port_info = {
+ .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA,
+};
+
/*
* Probe for a Gayle IDE interface (and optionally for an IDE doubler)
*/
hws[i] = &hw[i];
}
- rc = ide_host_add(NULL, hws, NULL);
+ rc = ide_host_add(&gayle_port_info, hws, NULL);
if (rc)
release_mem_region(res_start, res_n);
/* various tuning parameters */
#define HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
-#define HPT_SERIALIZE_IO 0
static const char *quirk_drives[] = {
"QUANTUM FIREBALLlct08 08",
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
/* Cache the channel's MISC. control registers' offset */
* Clock is shared between the channels,
* so we'll have to serialize them... :-(
*/
- serialize = 1;
+ hwif->host->host_flags |= IDE_HFLAG_SERIALIZE;
hwif->rw_disk = &hpt3xxn_rw_disk;
}
-
- /* Serialize access to this device if needed */
- if (serialize && hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
}
static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
in_params[0].buffer.length = sizeof(struct GTM_buffer);
in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
in_params[1].type = ACPI_TYPE_BUFFER;
- in_params[1].buffer.length = sizeof(ATA_ID_WORDS * 2);
+ in_params[1].buffer.length = ATA_ID_WORDS * 2;
in_params[1].buffer.pointer = (u8 *)&master->idbuff;
in_params[2].type = ACPI_TYPE_BUFFER;
- in_params[2].buffer.length = sizeof(ATA_ID_WORDS * 2);
+ in_params[2].buffer.length = ATA_ID_WORDS * 2;
in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
/* Output buffer: _STM has no output */
struct request *failed = (struct request *) rq->buffer;
struct cdrom_info *info = drive->driver_data;
void *sense = &info->sense_data;
- unsigned long flags;
if (failed) {
if (failed->sense) {
failed->hard_nr_sectors))
BUG();
} else {
- spin_lock_irqsave(&ide_lock, flags);
- if (__blk_end_request(failed, -EIO,
- failed->data_len))
+ if (blk_end_request(failed, -EIO,
+ failed->data_len))
BUG();
- spin_unlock_irqrestore(&ide_lock, flags);
}
} else
cdrom_analyze_sense_data(drive, NULL, sense);
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
{
ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->hwgroup->rq;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
+ struct request *rq = hwgroup->rq;
int stat, err, sense_key;
/* check for errors */
if (time_after(jiffies, info->write_timeout))
do_end_request = 1;
else {
+ struct request_queue *q = drive->queue;
unsigned long flags;
/*
* take a breather relying on the unplug
* timer to kick us again
*/
- spin_lock_irqsave(&ide_lock, flags);
- blk_plug_device(drive->queue);
- spin_unlock_irqrestore(&ide_lock,
- flags);
+ spin_lock_irqsave(q->queue_lock, flags);
+ blk_plug_device(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
return 1;
}
}
end_request:
if (stat & ATA_ERR) {
+ struct request_queue *q = drive->queue;
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(q->queue_lock, flags);
blkdev_dequeue_request(rq);
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ hwgroup->rq = NULL;
cdrom_queue_request_sense(drive, rq->sense, rq);
} else
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
-#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
-#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
-#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
-
-static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
-{
- struct cdrom_info *info = drive->driver_data;
- int stat;
- static int retry = 10;
-
- ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
-
- if (cdrom_decode_status(drive, 0, &stat))
- return ide_stopped;
-
- drive->atapi_flags |= IDE_AFLAG_SEEKING;
-
- if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
- if (--retry == 0)
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
- }
- return ide_stopped;
-}
-
-static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
-{
- sector_t frame = rq->sector;
-
- ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
-
- sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
-
- memset(rq->cmd, 0, BLK_MAX_CDB);
- rq->cmd[0] = GPCMD_SEEK;
- put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
-
- rq->timeout = ATAPI_WAIT_PC;
-}
-
-static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->hwgroup->rq;
-
- return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
-}
-
/*
* Fix up a possibly partially-processed request so that we can start it over
* entirely, or even put it back on the request queue.
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct request *rq = HWGROUP(drive)->rq;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
+ struct request *rq = hwgroup->rq;
xfer_func_t *xferfunc;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, stat, thislen, uptodate = 0;
end_request:
if (blk_pc_request(rq)) {
- unsigned long flags;
unsigned int dlen = rq->data_len;
if (dma)
rq->data_len = 0;
- spin_lock_irqsave(&ide_lock, flags);
- if (__blk_end_request(rq, 0, dlen))
+ if (blk_end_request(rq, 0, dlen))
BUG();
- HWGROUP(drive)->rq = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
+
+ hwgroup->rq = NULL;
} else {
if (!uptodate)
rq->cmd_flags |= REQ_FAILED;
static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
sector_t block)
{
- struct cdrom_info *info = drive->driver_data;
ide_handler_t *fn;
int xferlen;
(unsigned long long)block);
if (blk_fs_request(rq)) {
- if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long elapsed = jiffies - info->start_seek;
- int stat = hwif->tp_ops->read_status(hwif);
-
- if ((stat & ATA_DSC) != ATA_DSC) {
- if (elapsed < IDECD_SEEK_TIMEOUT) {
- ide_stall_queue(drive,
- IDECD_SEEK_TIMER);
- return ide_stopped;
- }
- printk(KERN_ERR PFX "%s: DSC timeout\n",
- drive->name);
- }
- drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
- }
- if (rq_data_dir(rq) == READ &&
- IDE_LARGE_SEEK(info->last_block, block,
- IDECD_SEEK_THRESHOLD) &&
- (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)) {
- xferlen = 0;
- fn = cdrom_start_seek_continuation;
+ xferlen = 32768;
+ fn = cdrom_start_rw_cont;
- drive->dma = 0;
- info->start_seek = jiffies;
-
- ide_cd_prepare_seek_request(drive, rq);
- } else {
- xferlen = 32768;
- fn = cdrom_start_rw_cont;
-
- if (cdrom_start_rw(drive, rq) == ide_stopped)
- return ide_stopped;
+ if (cdrom_start_rw(drive, rq) == ide_stopped)
+ return ide_stopped;
- if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
- return ide_stopped;
- }
- info->last_block = block;
+ if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+ return ide_stopped;
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
xferlen = rq->data_len;
{ NULL, 0, NULL, NULL }
};
-ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
-
-static const struct ide_proc_devset idecd_settings[] = {
- IDE_PROC_DEVSET(dsc_overlap, 0, 1),
- { 0 },
-};
-
static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive)
{
return idecd_proc;
static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive)
{
- return idecd_settings;
+ return NULL;
}
#endif
/* set correct block size */
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
- if (drive->next != drive)
- drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
- else
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
-
if (ide_cdrom_register(drive, nslots)) {
printk(KERN_ERR PFX "%s: %s failed to register device with the"
" cdrom driver.\n", drive->name, __func__);
kfree(info->toc);
if (devinfo->handle == drive)
unregister_cdrom(devinfo);
- drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
blk_queue_prep_rq(drive->queue, NULL);
g->private_data = NULL;
struct request_sense sense_data;
struct request request_sense_request;
- unsigned long last_block;
- unsigned long start_seek;
u8 max_speed; /* Max speed of the drive. */
u8 current_speed; /* Current speed of the drive. */
{
ide_hwif_t *hwif = drive->hwif;
__le32 *table = (__le32 *)hwif->dmatable_cpu;
- unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
unsigned int count = 0;
int i;
struct scatterlist *sg;
+ u8 is_trm290 = !!(hwif->host_flags & IDE_HFLAG_TRM290);
hwif->sg_nents = ide_build_sglist(drive, rq);
if (hwif->sg_nents == 0)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
- unsigned int reading;
+ unsigned int reading = rq_data_dir(rq) ? 0 : ATA_DMA_WR;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 dma_stat;
- if (rq_data_dir(rq))
- reading = 0;
- else
- reading = 1 << 3;
-
/* fall back to pio! */
if (!ide_build_dmatable(drive, rq)) {
ide_map_sg(drive, rq);
/* clear INTR & ERROR flags */
if (mmio)
- writeb(dma_stat | 6,
+ writeb(dma_stat | ATA_DMA_ERR | ATA_DMA_INTR,
(void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+ outb(dma_stat | ATA_DMA_ERR | ATA_DMA_INTR,
+ hwif->dma_base + ATA_DMA_STATUS);
drive->waiting_for_dma = 1;
return 0;
hwif->hwgroup->expiry = NULL; /* one free ride for now */
- /* 1 dmaing, 2 error, 4 intr */
- if (dma_stat & 2) /* ERROR */
+ if (dma_stat & ATA_DMA_ERR) /* ERROR */
return -1;
- if (dma_stat & 1) /* DMAing */
+ if (dma_stat & ATA_DMA_ACTIVE) /* DMAing */
return WAIT_CMD;
- if (dma_stat & 4) /* Got an Interrupt */
+ if (dma_stat & ATA_DMA_INTR) /* Got an Interrupt */
return WAIT_CMD;
return 0; /* Status is unknown -- reset the bus */
*/
if (hwif->host_flags & IDE_HFLAG_MMIO) {
dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* start DMA */
- writeb(dma_cmd | 1,
+ writeb(dma_cmd | ATA_DMA_START,
(void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
} else {
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd | ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
}
wmb();
{
ide_hwif_t *hwif = drive->hwif;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 dma_stat = 0, dma_cmd = 0;
+ u8 dma_stat = 0, dma_cmd = 0, mask;
drive->waiting_for_dma = 0;
+ /* stop DMA */
if (mmio) {
- /* get DMA command mode */
dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* stop DMA */
- writeb(dma_cmd & ~1,
+ writeb(dma_cmd & ~ATA_DMA_START,
(void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
} else {
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
}
/* get DMA status */
if (mmio)
/* clear the INTR & ERROR bits */
- writeb(dma_stat | 6,
+ writeb(dma_stat | ATA_DMA_ERR | ATA_DMA_INTR,
(void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+ outb(dma_stat | ATA_DMA_ERR | ATA_DMA_INTR,
+ hwif->dma_base + ATA_DMA_STATUS);
/* purge DMA mappings */
ide_destroy_dmatable(drive);
- /* verify good DMA status */
wmb();
- return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+
+ /* verify good DMA status */
+ mask = ATA_DMA_ACTIVE | ATA_DMA_ERR | ATA_DMA_INTR;
+ if ((dma_stat & mask) != ATA_DMA_INTR)
+ return 0x10 | dma_stat;
+ return 0;
}
EXPORT_SYMBOL_GPL(ide_dma_end);
ide_hwif_t *hwif = drive->hwif;
u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
- /* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
- return 1;
-
- return 0;
+ return (dma_stat & ATA_DMA_INTR) ? 1 : 0;
}
EXPORT_SYMBOL_GPL(ide_dma_test_irq);
ide_dma_on(drive);
}
- if (!__blk_end_request(rq, error, nr_bytes)) {
- if (dequeue)
- HWGROUP(drive)->rq = NULL;
+ if (!blk_end_request(rq, error, nr_bytes))
ret = 0;
- }
+
+ if (ret == 0 && dequeue)
+ drive->hwif->hwgroup->rq = NULL;
return ret;
}
int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
unsigned int nr_bytes = nr_sectors << 9;
- struct request *rq;
- unsigned long flags;
- int ret = 1;
-
- /*
- * room for locking improvements here, the calls below don't
- * need the queue lock held at all
- */
- spin_lock_irqsave(&ide_lock, flags);
- rq = HWGROUP(drive)->rq;
+ struct request *rq = drive->hwif->hwgroup->rq;
if (!nr_bytes) {
if (blk_pc_request(rq))
nr_bytes = rq->hard_cur_sectors << 9;
}
- ret = __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
-
- spin_unlock_irqrestore(&ide_lock, flags);
- return ret;
+ return __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
}
EXPORT_SYMBOL(ide_end_request);
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
-#ifdef DEBUG_PM
- printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
- drive->name, pm->pm_step);
-#endif
- if (drive->media != ide_disk)
- return;
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = IDE_PM_COMPLETED;
- else
- pm->pm_step = IDE_PM_STANDBY;
- break;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- pm->pm_step = IDE_PM_COMPLETED;
- break;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- pm->pm_step = IDE_PM_IDLE;
- break;
- case IDE_PM_IDLE: /* Resume step 2 (idle)*/
- pm->pm_step = IDE_PM_RESTORE_DMA;
- break;
- }
-}
-
-static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
- ide_task_t *args = rq->special;
-
- memset(args, 0, sizeof(*args));
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (drive->media != ide_disk)
- break;
- /* Not supported? Switch to next step now. */
- if (ata_id_flush_enabled(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- }
- if (ata_id_flush_ext_enabled(drive->id))
- args->tf.command = ATA_CMD_FLUSH_EXT;
- else
- args->tf.command = ATA_CMD_FLUSH;
- goto out_do_tf;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- args->tf.command = ATA_CMD_STANDBYNOW1;
- goto out_do_tf;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- ide_set_max_pio(drive);
- /*
- * skip IDE_PM_IDLE for ATAPI devices
- */
- if (drive->media != ide_disk)
- pm->pm_step = IDE_PM_RESTORE_DMA;
- else
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- case IDE_PM_IDLE: /* Resume step 2 (idle) */
- args->tf.command = ATA_CMD_IDLEIMMEDIATE;
- goto out_do_tf;
- case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
- /*
- * Right now, all we do is call ide_set_dma(drive),
- * we could be smarter and check for current xfer_speed
- * in struct drive etc...
- */
- if (drive->hwif->dma_ops == NULL)
- break;
- /*
- * TODO: respect IDE_DFLAG_USING_DMA
- */
- ide_set_dma(drive);
- break;
- }
-
- pm->pm_step = IDE_PM_COMPLETED;
- return ide_stopped;
-
-out_do_tf:
- args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args->data_phase = TASKFILE_NO_DATA;
- return do_rw_taskfile(drive, args);
-}
-
/**
* ide_end_dequeued_request - complete an IDE I/O
* @drive: IDE device for the I/O
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
int uptodate, int nr_sectors)
{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&ide_lock, flags);
BUG_ON(!blk_rq_started(rq));
- ret = __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
- spin_unlock_irqrestore(&ide_lock, flags);
- return ret;
+ return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
}
EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
-
-/**
- * ide_complete_pm_request - end the current Power Management request
- * @drive: target drive
- * @rq: request
- *
- * This function cleans up the current PM request and stops the queue
- * if necessary.
- */
-static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
-{
- unsigned long flags;
-
-#ifdef DEBUG_PM
- printk("%s: completing PM request, %s\n", drive->name,
- blk_pm_suspend_request(rq) ? "suspend" : "resume");
-#endif
- spin_lock_irqsave(&ide_lock, flags);
- if (blk_pm_suspend_request(rq)) {
- blk_stop_queue(drive->queue);
- } else {
- drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
- blk_start_queue(drive->queue);
- }
- HWGROUP(drive)->rq = NULL;
- if (__blk_end_request(rq, 0, 0))
- BUG();
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
/**
* ide_end_drive_cmd - end an explicit drive command
* @drive: command
void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
{
- unsigned long flags;
- struct request *rq;
-
- spin_lock_irqsave(&ide_lock, flags);
- rq = HWGROUP(drive)->rq;
- spin_unlock_irqrestore(&ide_lock, flags);
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ struct request *rq = hwgroup->rq;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
ide_task_t *task = (ide_task_t *)rq->special;
- if (rq->errors == 0)
- rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
-
if (task) {
struct ide_taskfile *tf = &task->tf;
return;
}
- spin_lock_irqsave(&ide_lock, flags);
- HWGROUP(drive)->rq = NULL;
+ hwgroup->rq = NULL;
+
rq->errors = err;
- if (unlikely(__blk_end_request(rq, (rq->errors ? -EIO : 0),
- blk_rq_bytes(rq))))
+
+ if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0),
+ blk_rq_bytes(rq))))
BUG();
- spin_unlock_irqrestore(&ide_lock, flags);
}
-
EXPORT_SYMBOL(ide_end_drive_cmd);
static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
}
}
-static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
- if (blk_pm_suspend_request(rq) &&
- pm->pm_step == IDE_PM_START_SUSPEND)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_pm_resume_request(rq) &&
- pm->pm_step == IDE_PM_START_RESUME) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- ide_hwif_t *hwif = drive->hwif;
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- SELECT_DRIVE(drive);
- hwif->tp_ops->set_irq(hwif, 1);
- rc = ide_wait_not_busy(hwif, 100000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
- }
-}
-
/**
* start_request - start of I/O and command issuing for IDE
*
/*
* Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&ide_lock, ..);
+ * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
*
* A hwgroup is a serialized group of IDE interfaces. Usually there is
* exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
* possibly along with many other devices. This is especially common in
* PCI-based systems with off-board IDE controller cards.
*
- * The IDE driver uses the single global ide_lock spinlock to protect
+ * The IDE driver uses a per-hwgroup spinlock to protect
* access to the request queues, and to protect the hwgroup->busy flag.
*
* The first thread into the driver for a particular hwgroup sets the
* will start the next request from the queue. If no more work remains,
* the driver will clear the hwgroup->busy flag and exit.
*
- * The ide_lock (spinlock) is used to protect all access to the
+ * The per-hwgroup spinlock is used to protect all access to the
* hwgroup->busy flag, but is otherwise not needed for most processing in
* the driver. This makes the driver much more friendlier to shared IRQs
* than previous designs, while remaining 100% (?) SMP safe and capable.
ide_startstop_t startstop;
int loops = 0;
- /* caller must own ide_lock */
+ /* caller must own hwgroup->lock */
BUG_ON(!irqs_disabled());
while (!hwgroup->busy) {
}
again:
hwif = HWIF(drive);
- if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) {
+ if (hwif != hwgroup->hwif) {
/*
* set nIEN for previous hwif, drives in the
* quirk_list may not like intr setups/cleanups
*/
- if (drive->quirk_list != 1)
+ if (drive->quirk_list == 0)
hwif->tp_ops->set_irq(hwif, 0);
}
hwgroup->hwif = hwif;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
drive->service_start = jiffies;
- if (blk_queue_plugged(drive->queue)) {
- printk(KERN_ERR "ide: huh? queue was plugged!\n");
- break;
- }
-
/*
* we know that the queue isn't empty, but this can happen
* if the q->prep_rq_fn() decides to kill a request
*/
if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
disable_irq_nosync(hwif->irq);
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
local_irq_enable_in_hardirq();
/* allow other IRQs while we start this request */
startstop = start_request(drive, rq);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
enable_irq(hwif->irq);
if (startstop == ide_stopped)
unsigned long flags;
unsigned long wait = -1;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
if (((handler = hwgroup->handler) == NULL) ||
(hwgroup->req_gen != hwgroup->req_gen_timer)) {
hwgroup->timer.expires = jiffies + wait;
hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
return;
}
}
* the handler() function, which means we need to
* globally mask the specific IRQ:
*/
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
hwif = HWIF(drive);
/* disable_irq_nosync ?? */
disable_irq(hwif->irq);
hwif->tp_ops->read_status(hwif));
}
drive->service_time = jiffies - drive->service_start;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
enable_irq(hwif->irq);
if (startstop == ide_stopped)
hwgroup->busy = 0;
}
}
ide_do_request(hwgroup, IDE_NO_IRQ);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
}
/**
{
unsigned long flags;
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
- ide_hwif_t *hwif;
+ ide_hwif_t *hwif = hwgroup->hwif;
ide_drive_t *drive;
ide_handler_t *handler;
ide_startstop_t startstop;
+ irqreturn_t irq_ret = IRQ_NONE;
- spin_lock_irqsave(&ide_lock, flags);
- hwif = hwgroup->hwif;
+ spin_lock_irqsave(&hwgroup->lock, flags);
- if (!ide_ack_intr(hwif)) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
- }
+ if (!ide_ack_intr(hwif))
+ goto out;
if ((handler = hwgroup->handler) == NULL || hwgroup->polling) {
/*
(void)hwif->tp_ops->read_status(hwif);
#endif /* CONFIG_BLK_DEV_IDEPCI */
}
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
+ goto out;
}
+
drive = hwgroup->drive;
if (!drive) {
/*
*
* [Note - this can occur if the drive is hot unplugged]
*/
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_HANDLED;
+ goto out_handled;
}
- if (!drive_is_ready(drive)) {
+
+ if (!drive_is_ready(drive))
/*
* This happens regularly when we share a PCI IRQ with
* another device. Unfortunately, it can also happen
* their status register is up to date. Hopefully we have
* enough advance overhead that the latter isn't a problem.
*/
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
- }
+ goto out;
+
if (!hwgroup->busy) {
hwgroup->busy = 1; /* paranoia */
printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
hwgroup->handler = NULL;
hwgroup->req_gen++;
del_timer(&hwgroup->timer);
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
if (hwif->port_ops && hwif->port_ops->clear_irq)
hwif->port_ops->clear_irq(drive);
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
"on exit\n", drive->name);
}
}
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_HANDLED;
+out_handled:
+ irq_ret = IRQ_HANDLED;
+out:
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
+ return irq_ret;
}
/**
void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ struct request_queue *q = drive->queue;
unsigned long flags;
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- spin_lock_irqsave(&ide_lock, flags);
hwgroup->rq = NULL;
- __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
- blk_start_queueing(drive->queue);
- spin_unlock_irqrestore(&ide_lock, flags);
-}
+ spin_lock_irqsave(q->queue_lock, flags);
+ __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ blk_start_queueing(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
EXPORT_SYMBOL(ide_do_drive_cmd);
void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
const struct ide_ioctl_devset *s)
{
const struct ide_devset *ds;
- unsigned long flags;
int err = -EOPNOTSUPP;
for (; (ds = s->setting); s++) {
read_val:
mutex_lock(&ide_setting_mtx);
- spin_lock_irqsave(&ide_lock, flags);
err = ds->get(drive);
- spin_unlock_irqrestore(&ide_lock, flags);
mutex_unlock(&ide_setting_mtx);
return err >= 0 ? put_user(err, (long __user *)arg) : err;
return -EPERM;
if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
- (drive->media == ide_disk || drive->media == ide_floppy ||
+ (drive->media != ide_tape ||
(drive->dev_flags & IDE_DFLAG_SCSI)))
return -EPERM;
void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler,
unsigned int timeout, ide_expiry_t *expiry)
{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
+
+ spin_lock_irqsave(&hwgroup->lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
}
EXPORT_SYMBOL(ide_set_handler);
void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
unsigned timeout, ide_expiry_t *expiry)
{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
unsigned long flags;
- ide_hwif_t *hwif = HWIF(drive);
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
__ide_set_handler(drive, handler, timeout, expiry);
hwif->tp_ops->exec_command(hwif, cmd);
/*
* FIXME: we could skip this delay with care on non shared devices
*/
ndelay(400);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
}
EXPORT_SYMBOL(ide_execute_command);
void ide_execute_pkt_cmd(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
unsigned long flags;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
hwif->tp_ops->exec_command(hwif, ATA_CMD_PACKET);
ndelay(400);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
}
EXPORT_SYMBOL_GPL(ide_execute_pkt_cmd);
*/
static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
{
- unsigned int unit;
- unsigned long flags, timeout;
- ide_hwif_t *hwif;
- ide_hwgroup_t *hwgroup;
- struct ide_io_ports *io_ports;
- const struct ide_tp_ops *tp_ops;
+ ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
+ struct ide_io_ports *io_ports = &hwif->io_ports;
+ const struct ide_tp_ops *tp_ops = hwif->tp_ops;
const struct ide_port_ops *port_ops;
+ unsigned long flags, timeout;
+ unsigned int unit;
DEFINE_WAIT(wait);
- spin_lock_irqsave(&ide_lock, flags);
- hwif = HWIF(drive);
- hwgroup = HWGROUP(drive);
-
- io_ports = &hwif->io_ports;
-
- tp_ops = hwif->tp_ops;
+ spin_lock_irqsave(&hwgroup->lock, flags);
/* We must not reset with running handlers */
BUG_ON(hwgroup->handler != NULL);
hwgroup->poll_timeout = jiffies + WAIT_WORSTCASE;
hwgroup->polling = 1;
__ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
return ide_started;
}
if (time_before_eq(timeout, now))
break;
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
timeout = schedule_timeout_uninterruptible(timeout - now);
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
} while (timeout);
finish_wait(&ide_park_wq, &wait);
pre_reset(&hwif->drives[unit]);
if (io_ports->ctl_addr == 0) {
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
ide_complete_drive_reset(drive, -ENXIO);
return ide_stopped;
}
if (port_ops && port_ops->resetproc)
port_ops->resetproc(drive);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
return ide_started;
}
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/ide.h>
+
+static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
+ u8 port_no, const struct ide_port_info *d,
+ unsigned long config)
+{
+ unsigned long base, ctl;
+ int irq;
+
+ if (port_no == 0) {
+ base = 0x1f0;
+ ctl = 0x3f6;
+ irq = 14;
+ } else {
+ base = 0x170;
+ ctl = 0x376;
+ irq = 15;
+ }
+
+ if (!request_region(base, 8, d->name)) {
+ printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
+ d->name, base, base + 7);
+ return;
+ }
+
+ if (!request_region(ctl, 1, d->name)) {
+ printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
+ d->name, ctl);
+ release_region(base, 8);
+ return;
+ }
+
+ ide_std_init_ports(hw, base, ctl);
+ hw->irq = irq;
+ hw->chipset = d->chipset;
+ hw->config = config;
+
+ hws[port_no] = hw;
+}
+
+int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
+{
+ hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
+
+ memset(&hw, 0, sizeof(hw));
+
+ if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
+ ide_legacy_init_one(hws, &hw[0], 0, d, config);
+ ide_legacy_init_one(hws, &hw[1], 1, d, config);
+
+ if (hws[0] == NULL && hws[1] == NULL &&
+ (d->host_flags & IDE_HFLAG_SINGLE))
+ return -ENOENT;
+
+ return ide_host_add(d, hws, NULL);
+}
+EXPORT_SYMBOL_GPL(ide_legacy_device_add);
return s;
}
-
EXPORT_SYMBOL(ide_xfer_verbose);
/**
* This is used by most chipset support modules when "auto-tuning".
*/
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
+u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode)
{
u16 *id = drive->id;
int pio_mode = -1, overridden = 0;
return pio_mode;
}
-
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
/* req_pio == "255" for auto-tune */
(void)ide_set_pio_mode(drive, XFER_PIO_0 + pio);
}
-
EXPORT_SYMBOL_GPL(ide_set_pio);
/**
* Enable or disable bounce buffering for the device. Drives move
* between PIO and DMA and that changes the rules we need.
*/
-
+
void ide_toggle_bounce(ide_drive_t *drive, int on)
{
u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */
return ide_config_drive_speed(drive, mode);
}
}
-
EXPORT_SYMBOL_GPL(ide_set_dma_mode);
/**
* ide_set_xfer_rate - set transfer rate
* @drive: drive to set
* @rate: speed to attempt to set
- *
+ *
* General helper for setting the speed of an IDE device. This
* function knows about user enforced limits from the configuration
* which ->set_pio_mode/->set_dma_mode does not.
static void ide_dump_opcode(ide_drive_t *drive)
{
- struct request *rq;
+ struct request *rq = drive->hwif->hwgroup->rq;
ide_task_t *task = NULL;
- spin_lock(&ide_lock);
- rq = NULL;
- if (HWGROUP(drive))
- rq = HWGROUP(drive)->rq;
- spin_unlock(&ide_lock);
if (!rq)
return;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
task = rq->special;
- printk("ide: failed opcode was: ");
+ printk(KERN_ERR "ide: failed opcode was: ");
if (task == NULL)
printk(KERN_CONT "unknown\n");
else
drive->hwif->tp_ops->tf_read(drive, &task);
if (lba48 || (tf->device & ATA_LBA))
- printk(", LBAsect=%llu",
+ printk(KERN_CONT ", LBAsect=%llu",
(unsigned long long)ide_get_lba_addr(tf, lba48));
else
- printk(", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
- tf->device & 0xf, tf->lbal);
+ printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
+ tf->device & 0xf, tf->lbal);
}
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- printk("{ ");
- if (err & ATA_ABORTED) printk("DriveStatusError ");
+ printk(KERN_ERR "{ ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
- printk((err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
- if (err & ATA_UNC) printk("UncorrectableError ");
- if (err & ATA_IDNF) printk("SectorIdNotFound ");
- if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
- if (err & ATA_AMNF) printk("AddrMarkNotFound ");
- printk("}");
+ printk(KERN_CONT "%s",
+ (err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
+ if (err & ATA_UNC)
+ printk(KERN_CONT "UncorrectableError ");
+ if (err & ATA_IDNF)
+ printk(KERN_CONT "SectorIdNotFound ");
+ if (err & ATA_TRK0NF)
+ printk(KERN_CONT "TrackZeroNotFound ");
+ if (err & ATA_AMNF)
+ printk(KERN_CONT "AddrMarkNotFound ");
+ printk(KERN_CONT "}");
if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
(err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
ide_dump_sector(drive);
if (HWGROUP(drive) && HWGROUP(drive)->rq)
- printk(", sector=%llu",
+ printk(KERN_CONT ", sector=%llu",
(unsigned long long)HWGROUP(drive)->rq->sector);
}
- printk("\n");
+ printk(KERN_CONT "\n");
}
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
- printk("{ ");
- if (err & ATAPI_ILI) printk("IllegalLengthIndication ");
- if (err & ATAPI_EOM) printk("EndOfMedia ");
- if (err & ATA_ABORTED) printk("AbortedCommand ");
- if (err & ATA_MCR) printk("MediaChangeRequested ");
- if (err & ATAPI_LFS) printk("LastFailedSense=0x%02x ",
- (err & ATAPI_LFS) >> 4);
- printk("}\n");
+ printk(KERN_ERR "{ ");
+ if (err & ATAPI_ILI)
+ printk(KERN_CONT "IllegalLengthIndication ");
+ if (err & ATAPI_EOM)
+ printk(KERN_CONT "EndOfMedia ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "AbortedCommand ");
+ if (err & ATA_MCR)
+ printk(KERN_CONT "MediaChangeRequested ");
+ if (err & ATAPI_LFS)
+ printk(KERN_CONT "LastFailedSense=0x%02x ",
+ (err & ATAPI_LFS) >> 4);
+ printk(KERN_CONT "}\n");
}
/**
u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
{
- unsigned long flags;
u8 err = 0;
- local_irq_save(flags);
- printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
+ printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
if (stat & ATA_BUSY)
- printk("Busy ");
+ printk(KERN_CONT "Busy ");
else {
- if (stat & ATA_DRDY) printk("DriveReady ");
- if (stat & ATA_DF) printk("DeviceFault ");
- if (stat & ATA_DSC) printk("SeekComplete ");
- if (stat & ATA_DRQ) printk("DataRequest ");
- if (stat & ATA_CORR) printk("CorrectedError ");
- if (stat & ATA_IDX) printk("Index ");
- if (stat & ATA_ERR) printk("Error ");
+ if (stat & ATA_DRDY)
+ printk(KERN_CONT "DriveReady ");
+ if (stat & ATA_DF)
+ printk(KERN_CONT "DeviceFault ");
+ if (stat & ATA_DSC)
+ printk(KERN_CONT "SeekComplete ");
+ if (stat & ATA_DRQ)
+ printk(KERN_CONT "DataRequest ");
+ if (stat & ATA_CORR)
+ printk(KERN_CONT "CorrectedError ");
+ if (stat & ATA_IDX)
+ printk(KERN_CONT "Index ");
+ if (stat & ATA_ERR)
+ printk(KERN_CONT "Error ");
}
- printk("}\n");
+ printk(KERN_CONT "}\n");
if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
err = ide_read_error(drive);
- printk("%s: %s: error=0x%02x ", drive->name, msg, err);
+ printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
if (drive->media == ide_disk)
ide_dump_ata_error(drive, err);
else
ide_dump_atapi_error(drive, err);
}
ide_dump_opcode(drive);
- local_irq_restore(flags);
return err;
}
-
EXPORT_SYMBOL(ide_dump_status);
static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
struct request_queue *q = drive->queue;
struct request *rq;
int rc;
timeout += jiffies;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
if (drive->dev_flags & IDE_DFLAG_PARKED) {
- ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
- int reset_timer;
+ int reset_timer = time_before(timeout, drive->sleep);
- reset_timer = time_before(timeout, drive->sleep);
drive->sleep = timeout;
wake_up_all(&ide_park_wq);
if (reset_timer && hwgroup->sleeping &&
hwgroup->busy = 0;
blk_start_queueing(q);
}
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
return;
}
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
rq = blk_get_request(q, READ, __GFP_WAIT);
rq->cmd[0] = REQ_PARK_HEADS;
char *buf)
{
ide_drive_t *drive = to_ide_device(dev);
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
unsigned long now;
unsigned int msecs;
if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
return -EOPNOTSUPP;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
now = jiffies;
if (drive->dev_flags & IDE_DFLAG_PARKED &&
time_after(drive->sleep, now))
msecs = jiffies_to_msecs(drive->sleep - now);
else
msecs = 0;
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
return snprintf(buf, 20, "%u\n", msecs);
}
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+int generic_ide_suspend(struct device *dev, pm_message_t mesg)
+{
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct request *rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+ int ret;
+
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
+ ide_acpi_get_timing(hwif);
+
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_SUSPEND;
+ rq->special = &args;
+ rq->data = &rqpm;
+ rqpm.pm_step = IDE_PM_START_SUSPEND;
+ if (mesg.event == PM_EVENT_PRETHAW)
+ mesg.event = PM_EVENT_FREEZE;
+ rqpm.pm_state = mesg.event;
+
+ ret = blk_execute_rq(drive->queue, NULL, rq, 0);
+ blk_put_request(rq);
+
+ /* call ACPI _PS3 only after both devices are suspended */
+ if (ret == 0 && ((drive->dn & 1) || pair == NULL))
+ ide_acpi_set_state(hwif, 0);
+
+ return ret;
+}
+
+int generic_ide_resume(struct device *dev)
+{
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct request *rq;
+ struct request_pm_state rqpm;
+ ide_task_t args;
+ int err;
+
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
+ ide_acpi_set_state(hwif, 1);
+ ide_acpi_push_timing(hwif);
+ }
+
+ ide_acpi_exec_tfs(drive);
+
+ memset(&rqpm, 0, sizeof(rqpm));
+ memset(&args, 0, sizeof(args));
+ rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
+ rq->cmd_type = REQ_TYPE_PM_RESUME;
+ rq->cmd_flags |= REQ_PREEMPT;
+ rq->special = &args;
+ rq->data = &rqpm;
+ rqpm.pm_step = IDE_PM_START_RESUME;
+ rqpm.pm_state = PM_EVENT_ON;
+
+ err = blk_execute_rq(drive->queue, NULL, rq, 1);
+ blk_put_request(rq);
+
+ if (err == 0 && dev->driver) {
+ ide_driver_t *drv = to_ide_driver(dev->driver);
+
+ if (drv->resume)
+ drv->resume(drive);
+ }
+
+ return err;
+}
+
+void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+
+#ifdef DEBUG_PM
+ printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
+ drive->name, pm->pm_step);
+#endif
+ if (drive->media != ide_disk)
+ return;
+
+ switch (pm->pm_step) {
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
+ if (pm->pm_state == PM_EVENT_FREEZE)
+ pm->pm_step = IDE_PM_COMPLETED;
+ else
+ pm->pm_step = IDE_PM_STANDBY;
+ break;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
+ break;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
+ break;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
+ break;
+ }
+}
+
+ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+ ide_task_t *args = rq->special;
+
+ memset(args, 0, sizeof(*args));
+
+ switch (pm->pm_step) {
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
+ if (drive->media != ide_disk)
+ break;
+ /* Not supported? Switch to next step now. */
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
+ ide_complete_power_step(drive, rq);
+ return ide_stopped;
+ }
+ if (ata_id_flush_ext_enabled(drive->id))
+ args->tf.command = ATA_CMD_FLUSH_EXT;
+ else
+ args->tf.command = ATA_CMD_FLUSH;
+ goto out_do_tf;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ args->tf.command = ATA_CMD_STANDBYNOW1;
+ goto out_do_tf;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ ide_set_max_pio(drive);
+ /*
+ * skip IDE_PM_IDLE for ATAPI devices
+ */
+ if (drive->media != ide_disk)
+ pm->pm_step = IDE_PM_RESTORE_DMA;
+ else
+ ide_complete_power_step(drive, rq);
+ return ide_stopped;
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
+ args->tf.command = ATA_CMD_IDLEIMMEDIATE;
+ goto out_do_tf;
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
+ /*
+ * Right now, all we do is call ide_set_dma(drive),
+ * we could be smarter and check for current xfer_speed
+ * in struct drive etc...
+ */
+ if (drive->hwif->dma_ops == NULL)
+ break;
+ /*
+ * TODO: respect IDE_DFLAG_USING_DMA
+ */
+ ide_set_dma(drive);
+ break;
+ }
+
+ pm->pm_step = IDE_PM_COMPLETED;
+ return ide_stopped;
+
+out_do_tf:
+ args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ args->data_phase = TASKFILE_NO_DATA;
+ return do_rw_taskfile(drive, args);
+}
+
+/**
+ * ide_complete_pm_request - end the current Power Management request
+ * @drive: target drive
+ * @rq: request
+ *
+ * This function cleans up the current PM request and stops the queue
+ * if necessary.
+ */
+void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
+{
+ struct request_queue *q = drive->queue;
+ unsigned long flags;
+
+#ifdef DEBUG_PM
+ printk("%s: completing PM request, %s\n", drive->name,
+ blk_pm_suspend_request(rq) ? "suspend" : "resume");
+#endif
+ spin_lock_irqsave(q->queue_lock, flags);
+ if (blk_pm_suspend_request(rq)) {
+ blk_stop_queue(q);
+ } else {
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
+ blk_start_queue(q);
+ }
+ spin_unlock_irqrestore(q->queue_lock, flags);
+
+ drive->hwif->hwgroup->rq = NULL;
+
+ if (blk_end_request(rq, 0, 0))
+ BUG();
+}
+
+void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
+{
+ struct request_pm_state *pm = rq->data;
+
+ if (blk_pm_suspend_request(rq) &&
+ pm->pm_step == IDE_PM_START_SUSPEND)
+ /* Mark drive blocked when starting the suspend sequence. */
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
+ else if (blk_pm_resume_request(rq) &&
+ pm->pm_step == IDE_PM_START_RESUME) {
+ /*
+ * The first thing we do on wakeup is to wait for BSY bit to
+ * go away (with a looong timeout) as a drive on this hwif may
+ * just be POSTing itself.
+ * We do that before even selecting as the "other" device on
+ * the bus may be broken enough to walk on our toes at this
+ * point.
+ */
+ ide_hwif_t *hwif = drive->hwif;
+ int rc;
+#ifdef DEBUG_PM
+ printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
+#endif
+ rc = ide_wait_not_busy(hwif, 35000);
+ if (rc)
+ printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
+ SELECT_DRIVE(drive);
+ hwif->tp_ops->set_irq(hwif, 1);
+ rc = ide_wait_not_busy(hwif, 100000);
+ if (rc)
+ printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+ }
+}
* read and parse the results. This function is run with
* interrupts disabled.
*/
-
-static inline void do_identify (ide_drive_t *drive, u8 cmd)
+
+static void do_identify(ide_drive_t *drive, u8 cmd)
{
ide_hwif_t *hwif = HWIF(drive);
u16 *id = drive->id;
char *m = (char *)&id[ATA_ID_PROD];
+ unsigned long flags;
int bswap = 1, is_cfa;
+ /* local CPU only; some systems need this */
+ local_irq_save(flags);
/* read 512 bytes of id info */
hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
+ local_irq_restore(flags);
drive->dev_flags |= IDE_DFLAG_ID_READ;
-
- local_irq_enable();
#ifdef DEBUG
printk(KERN_INFO "%s: dumping identify data\n", drive->name);
ide_dump_identify((u8 *)id);
s = tp_ops->read_status(hwif);
if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) {
- unsigned long flags;
-
- /* local CPU only; some systems need this */
- local_irq_save(flags);
/* drive returned ID */
do_identify(drive, cmd);
/* drive responded with ID */
rc = 0;
/* clear drive IRQ */
(void)tp_ops->read_status(hwif);
- local_irq_restore(flags);
} else {
/* drive refused ID */
rc = 2;
* 1 device was found
* (note: IDE_DFLAG_PRESENT might still be not set)
*/
-
-static inline u8 probe_for_drive (ide_drive_t *drive)
+
+static u8 probe_for_drive(ide_drive_t *drive)
{
char *m;
int ret;
/* register with global device tree */
- strlcpy(hwif->gendev.bus_id,hwif->name,BUS_ID_SIZE);
+ dev_set_name(&hwif->gendev, hwif->name);
hwif->gendev.driver_data = hwif;
if (hwif->gendev.parent == NULL) {
if (hwif->dev)
}
}
-/*
- * save_match() is used to simplify logic in init_irq() below.
- *
- * A loophole here is that we may not know about a particular
- * hwif's irq until after that hwif is actually probed/initialized..
- * This could be a problem for the case where an hwif is on a
- * dual interface that requires serialization (eg. cmd640) and another
- * hwif using one of the same irqs is initialized beforehand.
- *
- * This routine detects and reports such situations, but does not fix them.
- */
-static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
-{
- ide_hwif_t *m = *match;
-
- if (m && m->hwgroup && m->hwgroup != new->hwgroup) {
- if (!new->hwgroup)
- return;
- printk(KERN_WARNING "%s: potential IRQ problem with %s and %s\n",
- hwif->name, new->name, m->name);
- }
- if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
- *match = new;
-}
-
/*
* init request queue
*/
* do not.
*/
- q = blk_init_queue_node(do_ide_request, &ide_lock, hwif_to_node(hwif));
+ q = blk_init_queue_node(do_ide_request, &hwif->hwgroup->lock,
+ hwif_to_node(hwif));
if (!q)
return 1;
{
ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
if (!hwgroup->drive) {
/* first drive for hwgroup. */
drive->next = drive;
drive->next = hwgroup->drive->next;
hwgroup->drive->next = drive;
}
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
}
/*
ide_ports[hwif->index] = NULL;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
/*
* Remove us from the hwgroup, and free
* the hwgroup if we were the only member
}
BUG_ON(hwgroup->hwif == hwif);
}
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
}
/*
mutex_lock(&ide_cfg_mtx);
hwif->hwgroup = NULL;
- /*
- * Group up with any other hwifs that share our irq(s).
- */
for (index = 0; index < MAX_HWIFS; index++) {
ide_hwif_t *h = ide_ports[index];
if (h && h->hwgroup) { /* scan only initialized ports */
- if (hwif->irq == h->irq) {
- hwif->sharing_irq = h->sharing_irq = 1;
- if (hwif->chipset != ide_pci ||
- h->chipset != ide_pci) {
- save_match(hwif, h, &match);
- }
- }
- if (hwif->serialized) {
- if (hwif->mate && hwif->mate->irq == h->irq)
- save_match(hwif, h, &match);
- }
- if (h->serialized) {
- if (h->mate && hwif->irq == h->mate->irq)
- save_match(hwif, h, &match);
+ if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE) {
+ if (hwif->host == h->host)
+ match = h;
}
}
}
* linked list, the first entry is the hwif that owns
* hwgroup->handler - do not change that.
*/
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
hwif->next = hwgroup->hwif->next;
hwgroup->hwif->next = hwif;
BUG_ON(hwif->next == hwif);
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
} else {
hwgroup = kmalloc_node(sizeof(*hwgroup), GFP_KERNEL|__GFP_ZERO,
hwif_to_node(hwif));
if (hwgroup == NULL)
goto out_up;
+ spin_lock_init(&hwgroup->lock);
+
hwif->hwgroup = hwgroup;
hwgroup->hwif = hwif->next = hwif;
sa = IRQF_SHARED;
#endif /* __mc68000__ */
- if (hwif->chipset == ide_pci || hwif->chipset == ide_cmd646 ||
- hwif->chipset == ide_ali14xx)
+ if (hwif->chipset == ide_pci)
sa = IRQF_SHARED;
if (io_ports->ctl_addr)
io_ports->data_addr, hwif->irq);
#endif /* __mc68000__ */
if (match)
- printk(KERN_CONT " (%sed with %s)",
- hwif->sharing_irq ? "shar" : "serializ", match->name);
+ printk(KERN_CONT " (serialized with %s)", match->name);
printk(KERN_CONT "\n");
mutex_unlock(&ide_cfg_mtx);
static void drive_release_dev (struct device *dev)
{
ide_drive_t *drive = container_of(dev, ide_drive_t, gendev);
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
ide_proc_unregister_device(drive);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
ide_remove_drive_from_hwgroup(drive);
kfree(drive->id);
drive->id = NULL;
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
/* Messed up locking ... */
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
blk_cleanup_queue(drive->queue);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
drive->queue = NULL;
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
complete(&drive->gendev_rel_comp);
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;
- snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
+ dev_set_name(dev, "%u.%u", hwif->index, i);
dev->parent = &hwif->gendev;
dev->bus = &ide_bus_type;
dev->driver_data = drive;
}
if ((d->host_flags & IDE_HFLAG_SERIALIZE) ||
- ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base)) {
- if (hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
- }
+ ((d->host_flags & IDE_HFLAG_SERIALIZE_DMA) && hwif->dma_base))
+ hwif->host->host_flags |= IDE_HFLAG_SERIALIZE;
- if (d->host_flags & IDE_HFLAG_RQSIZE_256)
- hwif->rqsize = 256;
+ if (d->max_sectors)
+ hwif->rqsize = d->max_sectors;
/* call chipset specific routine for each enabled port */
if (d->init_hwif)
ide_proc_port_register_devices(hwif);
}
EXPORT_SYMBOL_GPL(ide_port_scan);
-
-static void ide_legacy_init_one(hw_regs_t **hws, hw_regs_t *hw,
- u8 port_no, const struct ide_port_info *d,
- unsigned long config)
-{
- unsigned long base, ctl;
- int irq;
-
- if (port_no == 0) {
- base = 0x1f0;
- ctl = 0x3f6;
- irq = 14;
- } else {
- base = 0x170;
- ctl = 0x376;
- irq = 15;
- }
-
- if (!request_region(base, 8, d->name)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- d->name, base, base + 7);
- return;
- }
-
- if (!request_region(ctl, 1, d->name)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- d->name, ctl);
- release_region(base, 8);
- return;
- }
-
- ide_std_init_ports(hw, base, ctl);
- hw->irq = irq;
- hw->chipset = d->chipset;
- hw->config = config;
-
- hws[port_no] = hw;
-}
-
-int ide_legacy_device_add(const struct ide_port_info *d, unsigned long config)
-{
- hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
-
- memset(&hw, 0, sizeof(hw));
-
- if ((d->host_flags & IDE_HFLAG_QD_2ND_PORT) == 0)
- ide_legacy_init_one(hws, &hw[0], 0, d, config);
- ide_legacy_init_one(hws, &hw[1], 1, d, config);
-
- if (hws[0] == NULL && hws[1] == NULL &&
- (d->host_flags & IDE_HFLAG_SINGLE))
- return -ENOENT;
-
- return ide_host_add(d, hws, NULL);
-}
-EXPORT_SYMBOL_GPL(ide_legacy_device_add);
case ide_qd65xx: name = "qd65xx"; break;
case ide_umc8672: name = "umc8672"; break;
case ide_ht6560b: name = "ht6560b"; break;
- case ide_rz1000: name = "rz1000"; break;
- case ide_trm290: name = "trm290"; break;
- case ide_cmd646: name = "cmd646"; break;
- case ide_cy82c693: name = "cy82c693"; break;
case ide_4drives: name = "4drives"; break;
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
const struct ide_devset *ds = setting->setting;
int val = -EINVAL;
- if (ds->get) {
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
+ if (ds->get)
val = ds->get(drive);
- spin_unlock_irqrestore(&ide_lock, flags);
- }
return val;
}
* Clean up the driver specific /proc files and IDE settings
* for a given drive.
*
- * Takes ide_setting_mtx and ide_lock.
- * Caller must hold none of the locks.
+ * Takes ide_setting_mtx.
*/
void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
{
- unsigned long flags;
-
ide_remove_proc_entries(drive->proc, driver->proc_entries(drive));
mutex_lock(&ide_setting_mtx);
- spin_lock_irqsave(&ide_lock, flags);
/*
- * ide_setting_mtx protects the settings list
- * ide_lock protects the use of settings
- *
- * so we need to hold both, ide_settings_sem because we want to
- * modify the settings list, and ide_lock because we cannot take
- * a setting out that is being used.
- *
- * OTOH both ide_{read,write}_setting are only ever used under
- * ide_setting_mtx.
+ * ide_setting_mtx protects both the settings list and the use
+ * of settings (we cannot take a setting out that is being used).
*/
drive->settings = NULL;
- spin_unlock_irqrestore(&ide_lock, flags);
mutex_unlock(&ide_setting_mtx);
}
EXPORT_SYMBOL(ide_proc_unregister_driver);
DEFINE_MUTEX(ide_cfg_mtx);
-__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
-EXPORT_SYMBOL(ide_lock);
-
static void ide_port_init_devices_data(ide_hwif_t *);
/*
}
}
-/* Called with ide_lock held. */
static void __ide_port_unregister_devices(ide_hwif_t *hwif)
{
int i;
ide_drive_t *drive = &hwif->drives[i];
if (drive->dev_flags & IDE_DFLAG_PRESENT) {
- spin_unlock_irq(&ide_lock);
device_unregister(&drive->gendev);
wait_for_completion(&drive->gendev_rel_comp);
- spin_lock_irq(&ide_lock);
}
}
}
void ide_port_unregister_devices(ide_hwif_t *hwif)
{
mutex_lock(&ide_cfg_mtx);
- spin_lock_irq(&ide_lock);
__ide_port_unregister_devices(hwif);
hwif->present = 0;
ide_port_init_devices_data(hwif);
- spin_unlock_irq(&ide_lock);
mutex_unlock(&ide_cfg_mtx);
}
EXPORT_SYMBOL_GPL(ide_port_unregister_devices);
mutex_lock(&ide_cfg_mtx);
- spin_lock_irq(&ide_lock);
if (hwif->present) {
__ide_port_unregister_devices(hwif);
hwif->present = 0;
}
- spin_unlock_irq(&ide_lock);
ide_proc_unregister_port(hwif);
static int set_pio_mode(ide_drive_t *drive, int arg)
{
ide_hwif_t *hwif = drive->hwif;
+ ide_hwgroup_t *hwgroup = hwif->hwgroup;
const struct ide_port_ops *port_ops = hwif->port_ops;
if (arg < 0 || arg > 255)
unsigned long flags;
/* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
port_ops->set_pio_mode(drive, arg);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
} else
port_ops->set_pio_mode(drive, arg);
} else {
ide_ext_devset_rw_sync(using_dma, using_dma);
__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);
-static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
-{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int ret;
-
- /* call ACPI _GTM only once */
- if ((drive->dn & 1) == 0 || pair == NULL)
- ide_acpi_get_timing(hwif);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_SUSPEND;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = IDE_PM_START_SUSPEND;
- if (mesg.event == PM_EVENT_PRETHAW)
- mesg.event = PM_EVENT_FREEZE;
- rqpm.pm_state = mesg.event;
-
- ret = blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
-
- /* call ACPI _PS3 only after both devices are suspended */
- if (ret == 0 && ((drive->dn & 1) || pair == NULL))
- ide_acpi_set_state(hwif, 0);
-
- return ret;
-}
-
-static int generic_ide_resume(struct device *dev)
-{
- ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
- ide_hwif_t *hwif = HWIF(drive);
- struct request *rq;
- struct request_pm_state rqpm;
- ide_task_t args;
- int err;
-
- /* call ACPI _PS0 / _STM only once */
- if ((drive->dn & 1) == 0 || pair == NULL) {
- ide_acpi_set_state(hwif, 1);
- ide_acpi_push_timing(hwif);
- }
-
- ide_acpi_exec_tfs(drive);
-
- memset(&rqpm, 0, sizeof(rqpm));
- memset(&args, 0, sizeof(args));
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_PM_RESUME;
- rq->cmd_flags |= REQ_PREEMPT;
- rq->special = &args;
- rq->data = &rqpm;
- rqpm.pm_step = IDE_PM_START_RESUME;
- rqpm.pm_state = PM_EVENT_ON;
-
- err = blk_execute_rq(drive->queue, NULL, rq, 1);
- blk_put_request(rq);
-
- if (err == 0 && dev->driver) {
- ide_driver_t *drv = to_ide_driver(dev->driver);
-
- if (drv->resume)
- drv->resume(drive);
- }
-
- return err;
-}
-
/**
* ide_device_get - get an additional reference to a ide_drive_t
* @drive: device to get a reference to
.dma_timeout = pdc202xx_dma_timeout,
};
-#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
+#define DECLARE_PDC2026X_DEV(udma, sectors) \
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_pdc202xx, \
.port_ops = &pdc2026x_port_ops, \
.dma_ops = &pdc2026x_dma_ops, \
- .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
+ .host_flags = IDE_HFLAGS_PDC202XX, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
+ .max_sectors = sectors, \
}
static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
/* 1: PDC2026{2,3} */
DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
- /* 2: PDC2026{5,7} */
- DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
+ /* 2: PDC2026{5,7}: UDMA5, limit LBA48 requests to 256 sectors */
+ DECLARE_PDC2026X_DEV(ATA_UDMA5, 256),
};
/**
#define DRV_NAME "rz1000"
-static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
+static int __devinit rz1000_disable_readahead(struct pci_dev *dev)
{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
u16 reg;
if (!pci_read_config_word (dev, 0x40, ®) &&
!pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
printk(KERN_INFO "%s: disabled chipset read-ahead "
- "(buggy RZ1000/RZ1001)\n", hwif->name);
+ "(buggy RZ1000/RZ1001)\n", pci_name(dev));
+ return 0;
} else {
- if (hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
- hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
printk(KERN_INFO "%s: serialized, disabled unmasking "
- "(buggy RZ1000/RZ1001)\n", hwif->name);
+ "(buggy RZ1000/RZ1001)\n", pci_name(dev));
+ return 1;
}
}
static const struct ide_port_info rz1000_chipset __devinitdata = {
.name = DRV_NAME,
- .init_hwif = init_hwif_rz1000,
- .chipset = ide_rz1000,
.host_flags = IDE_HFLAG_NO_DMA,
};
static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_pci_init_one(dev, &rz1000_chipset, NULL);
+ struct ide_port_info d = rz1000_chipset;
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+
+ if (rz1000_disable_readahead(dev)) {
+ d.host_flags |= IDE_HFLAG_SERIALIZE;
+ d.host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
+ }
+
+ return ide_pci_init_one(dev, &d, NULL);
+}
+
+static void rz1000_remove(struct pci_dev *dev)
+{
+ ide_pci_remove(dev);
+ pci_disable_device(dev);
}
static const struct pci_device_id rz1000_pci_tbl[] = {
.name = "RZ1000_IDE",
.id_table = rz1000_pci_tbl,
.probe = rz1000_init_one,
- .remove = ide_pci_remove,
+ .remove = rz1000_remove,
};
static int __init rz1000_ide_init(void)
static const struct ide_port_info trm290_chipset __devinitdata = {
.name = DRV_NAME,
.init_hwif = init_hwif_trm290,
- .chipset = ide_trm290,
.port_ops = &trm290_port_ops,
.dma_ops = &trm290_dma_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
+ .host_flags = IDE_HFLAG_TRM290 |
+ IDE_HFLAG_NO_ATAPI_DMA |
#if 0 /* play it safe for now */
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
#endif
while (count--)
*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
- __ide_flush_dcache_range((unsigned long)buf, count * 2);
+ __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
}
static void tx4938ide_output_data_swap(ide_drive_t *drive, struct request *rq,
__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
ptr++;
}
- __ide_flush_dcache_range((unsigned long)buf, count * 2);
+ __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
}
static const struct ide_tp_ops tx4938ide_tp_ops = {
bcount = 0x10000 - (cur_addr & 0xffff);
if (bcount > cur_len)
bcount = cur_len;
+ /*
+ * This workaround for zero count seems required.
+ * (standard ide_build_dmatable do it too)
+ */
+ if ((bcount & 0xffff) == 0x0000)
+ bcount = 0x8000;
*table++ = bcount & 0xffff;
*table++ = cur_addr;
cur_addr += bcount;
while (count--)
*ptr++ = cpu_to_le16(__raw_readw((void __iomem *)port));
- __ide_flush_dcache_range((unsigned long)buf, count * 2);
+ __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
}
static void tx4939ide_output_data_swap(ide_drive_t *drive, struct request *rq,
__raw_writew(le16_to_cpu(*ptr), (void __iomem *)port);
ptr++;
}
- __ide_flush_dcache_range((unsigned long)buf, count * 2);
+ __ide_flush_dcache_range((unsigned long)buf, roundup(len, 2));
}
static const struct ide_tp_ops tx4939ide_tp_ops = {
static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
+ ide_hwgroup_t *mate_hwgroup = hwif->mate ? hwif->mate->hwgroup : NULL;
+ unsigned long uninitialized_var(flags);
printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
drive->name, pio, pio_to_umc[pio]);
- spin_lock_irqsave(&ide_lock, flags);
- if (hwif->mate && hwif->mate->hwgroup->handler) {
+ if (mate_hwgroup)
+ spin_lock_irqsave(&mate_hwgroup->lock, flags);
+ if (mate_hwgroup && mate_hwgroup->handler) {
printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
} else {
current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
umc_set_speeds(current_speeds);
}
- spin_unlock_irqrestore(&ide_lock, flags);
+ if (mate_hwgroup)
+ spin_unlock_irqrestore(&mate_hwgroup->lock, flags);
}
static const struct ide_port_ops umc8672_port_ops = {
{
idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
ide_drive_t *drive = scsi->drive;
+ ide_hwif_t *hwif;
+ ide_hwgroup_t *hwgroup;
int busy;
int ret = FAILED;
goto no_drive;
}
- /* First give it some more time, how much is "right" is hard to say :-( */
+ hwif = drive->hwif;
+ hwgroup = hwif->hwgroup;
- busy = ide_wait_not_busy(HWIF(drive), 100); /* FIXME - uses mdelay which causes latency? */
+ /* First give it some more time, how much is "right" is hard to say :-(
+ FIXME - uses mdelay which causes latency? */
+ busy = ide_wait_not_busy(hwif, 100);
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":"");
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
/* If there is no pc running we're done (our interrupt took care of it) */
pc = drive->pc;
}
ide_unlock:
- spin_unlock_irq(&ide_lock);
+ spin_unlock_irq(&hwgroup->lock);
no_drive:
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed");
struct request *req;
idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
ide_drive_t *drive = scsi->drive;
+ ide_hwgroup_t *hwgroup;
int ready = 0;
int ret = SUCCESS;
return FAILED;
}
+ hwgroup = drive->hwif->hwgroup;
+
spin_lock_irq(cmd->device->host->host_lock);
- spin_lock(&ide_lock);
+ spin_lock(&hwgroup->lock);
pc = drive->pc;
+ if (pc)
+ req = pc->rq;
- if (pc == NULL || (req = pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
+ if (pc == NULL || req != hwgroup->rq || hwgroup->handler == NULL) {
printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
spin_unlock_irq(cmd->device->host->host_lock);
return FAILED;
}
BUG();
}
- HWGROUP(drive)->rq = NULL;
- HWGROUP(drive)->handler = NULL;
- HWGROUP(drive)->busy = 1; /* will set this to zero when ide reset finished */
- spin_unlock(&ide_lock);
+ hwgroup->rq = NULL;
+ hwgroup->handler = NULL;
+ hwgroup->busy = 1; /* will set this to zero when ide reset finished */
+ spin_unlock(&hwgroup->lock);
ide_do_reset(drive);
#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
#define SECTOR_SIZE 512
-#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
-
/*
* Timeouts for various operations:
*/
enum { ide_unknown, ide_generic, ide_pci,
ide_cmd640, ide_dtc2278, ide_ali14xx,
ide_qd65xx, ide_umc8672, ide_ht6560b,
- ide_rz1000, ide_trm290,
- ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_acorn,
+ ide_4drives, ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
* when more than one interrupt is needed.
*/
IDE_AFLAG_LIMIT_NFRAMES = (1 << 7),
- /* Seeking in progress. */
- IDE_AFLAG_SEEKING = (1 << 8),
/* Saved TOC information is current. */
IDE_AFLAG_TOC_VALID = (1 << 9),
/* We think that the drive door is locked. */
unsigned extra_ports; /* number of extra dma ports */
unsigned present : 1; /* this interface exists */
- unsigned serialized : 1; /* serialized all channel operation */
- unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
struct device gendev;
int req_gen;
int req_gen_timer;
+
+ spinlock_t lock;
} ide_hwgroup_t;
typedef struct ide_driver_s ide_driver_t;
IDE_PM_COMPLETED,
};
+int generic_ide_suspend(struct device *, pm_message_t);
+int generic_ide_resume(struct device *);
+
+void ide_complete_power_step(ide_drive_t *, struct request *);
+ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
+void ide_complete_pm_request(ide_drive_t *, struct request *);
+void ide_check_pm_state(ide_drive_t *, struct request *);
+
/*
* Subdrivers support.
*
IDE_HFLAG_LEGACY_IRQS = (1 << 21),
/* force use of legacy IRQs */
IDE_HFLAG_FORCE_LEGACY_IRQS = (1 << 22),
- /* limit LBA48 requests to 256 sectors */
- IDE_HFLAG_RQSIZE_256 = (1 << 23),
+ /* host is TRM290 */
+ IDE_HFLAG_TRM290 = (1 << 23),
/* use 32-bit I/O ops */
IDE_HFLAG_IO_32BIT = (1 << 24),
/* unmask IRQs */
ide_pci_enablebit_t enablebits[2];
hwif_chipset_t chipset;
+
+ u16 max_sectors; /* if < than the default one */
+
u32 host_flags;
u8 pio_mask;
u8 swdma_mask;
/*
* Structure locking:
*
- * ide_cfg_mtx and ide_lock together protect changes to
- * ide_hwif_t->{next,hwgroup}
+ * ide_cfg_mtx and hwgroup->lock together protect changes to
+ * ide_hwif_t->next
* ide_drive_t->next
*
- * ide_hwgroup_t->busy: ide_lock
- * ide_hwgroup_t->hwif: ide_lock
- * ide_hwif_t->mate: constant, no locking
+ * ide_hwgroup_t->busy: hwgroup->lock
+ * ide_hwgroup_t->hwif: hwgroup->lock
+ * ide_hwif_t->{hwgroup,mate}: constant, no locking
* ide_drive_t->hwif: constant, no locking
*/
projects / linux-2.6-omap-h63xx.git / commitdiff