},
        [EM2800_BOARD_TERRATEC_CINERGY_200] = {
                .name         = "Terratec Cinergy 200 USB",
-               .chip_id      = 0x4,
                .is_em2800    = 1,
                .vchannels    = 3,
                .norm         = VIDEO_MODE_PAL,
        },
        [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
                .name         = "Leadtek Winfast USB II",
-               .chip_id      = 0x2,
                .is_em2800    = 1,
                .vchannels    = 3,
                .norm         = VIDEO_MODE_PAL,
        },
        [EM2800_BOARD_KWORLD_USB2800] = {
                .name         = "Kworld USB2800",
-               .chip_id      = 0x7,
                .is_em2800    = 1,
                .vchannels    = 3,
                .norm         = VIDEO_MODE_PAL,
 
        buf[0] = v;
        buf[1] = v >> 8;
        em2820_write_regs(dev, VSCALELOW_REG, (char *)buf, 2);
+       if(dev->is_em2800){
+               /* FIXME */
+               /* random ratio scaling and 720x567 doesn't seem to work */
+               /* the maximum we can get is 640x480 with disabled scaler */
+               /* and norm_maxw set to 640 */
+               if(dev->width == 640 && dev->height == 480)
+                       return em2820_write_regs(dev, COMPR_REG,"\x00",1);
+               if(dev->height > 288)
+                       return em2820_write_regs(dev, COMPR_REG,"\x10",1);
+               if(dev->width > 360)
+                       return em2820_write_regs(dev, COMPR_REG,"\x20",1);
+       }
        /* when H and V mixershould be used? */
        /*      return em2820_write_reg_bits(dev, COMPR_REG, (h ? 0x20 : 0x00) | (v ? 0x10 : 0x00), 0x30); */
        /* it seems that both H and V scalers must be active to work correctly */
 
                        if (width > maxw)
                                width = maxw;
 
+                       /* FIXME*/
+                       if(dev->is_em2800){
+                               /* we only know how to scale to 50% */
+                               if(height % (maxh / 2))
+                                       height=maxh;
+                               if(width % (maxw / 2))
+                                       width=maxw;
+                               /* larger resoltion don't seem to work either */
+                               if(width == maxw && height == maxh)
+                                       width /= 2;
+                       }
+
                        if ((hscale =
                             (((unsigned long)maxw) << 12) / width - 4096L) >=
                            0x4000)