PARISC ARCHITECTURE
P: Kyle McMartin
M: kyle@mcmartin.ca
-P: Matthew Wilcox
-M: matthew@wil.cx
-P: Grant Grundler
-M: grundler@parisc-linux.org
+P: Helge Deller
+M: deller@gmx.de
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 29
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
.globl mcount_call
mcount_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENTRY(ftrace_caller)
.globl ftrace_call
ftrace_call:
bl ftrace_stub
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#else
adr r0, ftrace_stub
cmp r0, r2
bne trace
+ ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
trace:
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
+ mov lr, r1 @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
* disable irqs for the duration. Note - these functions are almost
* entirely coded in assembly.
*/
-void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs)
+void __naked set_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
: "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
-void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs)
+void __naked get_fiq_regs(struct pt_regs *regs)
{
register unsigned long tmp;
asm volatile (
#ifndef __ASSEMBLY__
+struct i2c_board_info;
+
struct ep93xx_eth_data
{
unsigned char dev_addr[6];
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+
+#include <mach/irqs.h>
#include <mach/hardware.h>
static struct resource imx_csi_resources[] = {
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#ifdef CONFIG_I2C2_OMAP_BEAGLE
omap_register_i2c_bus(2, 400, NULL, 0);
#endif
- omap_register_i2c_bus(3, 400, NULL, 0);
+ /* Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz */
+ omap_register_i2c_bus(3, 100, NULL, 0);
return 0;
}
/*****************************************************************************
* XOR engine
****************************************************************************/
+struct mv_xor_platform_shared_data orion5x_xor_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+};
+
static struct resource orion5x_xor_shared_resources[] = {
{
.name = "xor low",
static struct platform_device orion5x_xor_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
+ .dev = {
+ .platform_data = &orion5x_xor_shared_data,
+ },
.num_resources = ARRAY_SIZE(orion5x_xor_shared_resources),
.resource = orion5x_xor_shared_resources,
};
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
-struct map_desc smdk6410_iodesc[] = {};
+static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
#ifdef CONFIG_SMDK6410_SD_CH0
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
- { I2C_BOARD_INFO("WM8580", 0X1b), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
};
static struct i2c_board_info i2c_devs1[] __initdata = {
#include <linux/init.h>
#include <linux/highmem.h>
-static void __attribute__((naked))
+static void __naked
feroceon_copy_user_page(void *kto, const void *kfrom)
{
asm("\
*
* FIXME: do we need to handle cache stuff...
*/
-static void __attribute__((naked))
+static void __naked
v3_copy_user_page(void *kto, const void *kfrom)
{
asm("\n\
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
asm volatile(
* instruction. If your processor does not supply this, you have to write your
* own copy_user_highpage that does the right thing.
*/
-static void __attribute__((naked))
+static void __naked
v4wb_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* dirty data in the cache. However, we do have to ensure that
* subsequent reads are up to date.
*/
-static void __attribute__((naked))
+static void __naked
v4wt_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* if we eventually end up using our copied page.
*
*/
-static void __attribute__((naked))
+static void __naked
xsc3_mc_copy_user_page(void *kto, const void *kfrom)
{
asm("\
* Dcache aliasing issue. The writes will be forwarded to the write buffer,
* and merged as appropriate.
*/
-static void __attribute__((naked))
+static void __naked
mc_copy_user_page(void *from, void *to)
{
/*
*/
void dma_cache_maint(const void *start, size_t size, int direction)
{
- const void *end = start + size;
+ void (*inner_op)(const void *, const void *);
+ void (*outer_op)(unsigned long, unsigned long);
- BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(end - 1));
+ BUG_ON(!virt_addr_valid(start) || !virt_addr_valid(start + size - 1));
switch (direction) {
case DMA_FROM_DEVICE: /* invalidate only */
- dmac_inv_range(start, end);
- outer_inv_range(__pa(start), __pa(end));
+ inner_op = dmac_inv_range;
+ outer_op = outer_inv_range;
break;
case DMA_TO_DEVICE: /* writeback only */
- dmac_clean_range(start, end);
- outer_clean_range(__pa(start), __pa(end));
+ inner_op = dmac_clean_range;
+ outer_op = outer_clean_range;
break;
case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- dmac_flush_range(start, end);
- outer_flush_range(__pa(start), __pa(end));
+ inner_op = dmac_flush_range;
+ outer_op = outer_flush_range;
break;
default:
BUG();
}
+
+ inner_op(start, start + size);
+ outer_op(__pa(start), __pa(start) + size);
}
EXPORT_SYMBOL(dma_cache_maint);
for_each_node(node)
bootmem_free_node(node, mi);
- high_memory = __va(memend_pfn << PAGE_SHIFT);
+ high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
/*
* This doesn't seem to be used by the Linux memory manager any
{
if (addr < PHYS_OFFSET)
return 0;
- if (addr + size > __pa(high_memory))
+ if (addr + size >= __pa(high_memory - 1))
return 0;
return 1;
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
-obj-$(CONFIG_I2C_OMAP) += i2c.o
+i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
+obj-y += $(i2c-omap-m) $(i2c-omap-y)
# OMAP mailbox framework
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-/*
- * Rounds down to nearest nsec.
- */
-unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
- return cyc2ns(&clocksource_32k, ticks_32k);
-}
-
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
- return omap_32k_ticks_to_nsecs(omap_32k_read());
+ unsigned long long ret;
+
+ ret = (unsigned long long)omap_32k_read();
+ ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
+ return ret;
}
static int __init omap_init_clocksource_32k(void)
extern struct sys_timer omap_timer;
extern void omap_serial_init(void);
extern void omap_serial_enable_clocks(int enable);
-#ifdef CONFIG_I2C_OMAP
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
unsigned len);
!defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX) && \
!defined(CONFIG_ARCH_OMAP24XX)
-#error "Power management for this processor not implemented yet"
+#warning "Power management for this processor not implemented yet"
#endif
#ifndef __ASSEMBLER__
&clk_48m,
};
-void s3c64xx_register_clocks(void)
+void __init s3c64xx_register_clocks(void)
{
struct clk *clkp;
int ret;
return 0;
}
-arch_initcall(s3c64xx_gpiolib_init);
+core_initcall(s3c64xx_gpiolib_init);
#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
-#define IRQ_UHOST S3C64XX_IRQ_VIC1(15)
+#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
+#include <plat/regs-gpio.h>
+#include <plat/gpio-cfg.h>
#include <mach/map.h>
#include <plat/cpu.h>
static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
{
int offs = eint_offset(irq);
+ int pin;
int shift;
u32 ctrl, mask;
u32 newvalue = 0;
ctrl |= newvalue << shift;
__raw_writel(ctrl, reg);
+ /* set the GPIO pin appropriately */
+
+ if (offs < 23)
+ pin = S3C64XX_GPN(offs);
+ else
+ pin = S3C64XX_GPM(offs - 23);
+
+ s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+
return 0;
}
s3c_irq_demux_eint(20, 27);
}
-int __init s3c64xx_init_irq_eint(void)
+static int __init s3c64xx_init_irq_eint(void)
{
int irq;
static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
{
- void *reg_base = uirq->regs;
+ void __iomem *reg_base = uirq->regs;
unsigned int irq;
int offs;
* ext_xtal_mux for want of an actual name from the manual.
*/
-struct clk clk_ext_xtal_mux = {
+static struct clk clk_ext_xtal_mux = {
.name = "ext_xtal",
.id = -1,
};
void __iomem *reg_divider;
};
-struct clk clk_fout_apll = {
+static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
-struct clksrc_clk clk_mout_apll = {
+static struct clksrc_clk clk_mout_apll = {
.clk = {
.name = "mout_apll",
.id = -1,
.sources = &clk_src_apll,
};
-struct clk clk_fout_epll = {
+static struct clk clk_fout_epll = {
.name = "fout_epll",
.id = -1,
};
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
-struct clksrc_clk clk_mout_epll = {
+static struct clksrc_clk clk_mout_epll = {
.clk = {
.name = "mout_epll",
.id = -1,
.nr_sources = ARRAY_SIZE(clk_src_mpll_list),
};
-struct clksrc_clk clk_mout_mpll = {
+static struct clksrc_clk clk_mout_mpll = {
.clk = {
.name = "mout_mpll",
.id = -1,
return rate;
}
-struct clk clk_dout_mpll = {
+static struct clk clk_dout_mpll = {
.name = "dout_mpll",
.id = -1,
.parent = &clk_mout_mpll.clk,
};
static struct clk *clkset_uhost_list[] = {
+ &clk_48m,
&clk_mout_epll.clk,
&clk_dout_mpll,
&clk_fin_epll,
- &clk_48m,
};
static struct clk_sources clkset_uhost = {
rate = clk_round_rate(clk, rate);
div = clk_get_rate(clk->parent) / rate;
+ if (div > 16)
+ return -EINVAL;
val = __raw_readl(reg);
- val &= ~sclk->mask;
- val |= (rate - 1) << sclk->shift;
+ val &= ~(0xf << sclk->shift);
+ val |= (div - 1) << sclk->shift;
__raw_writel(val, reg);
return 0;
static struct clksrc_clk clk_usbhost = {
.clk = {
- .name = "usb-host-bus",
+ .name = "usb-bus-host",
.id = -1,
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Nov 30 16:39:36 2008
+# Last update: Thu Mar 12 18:01:45 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
gprisc3 MACH_GPRISC3 GPRISC3 1823
-stamp9260 MACH_STAMP9260 STAMP9260 1824
+stamp9g20 MACH_STAMP9G20 STAMP9G20 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
tavorevb MACH_TAVOREVB TAVOREVB 1827
benzina MACH_BENZINA BENZINA 2003
blaze MACH_BLAZE BLAZE 2004
linkstation_ls_hgl MACH_LINKSTATION_LS_HGL LINKSTATION_LS_HGL 2005
-htcvenus MACH_HTCVENUS HTCVENUS 2006
+htckovsky MACH_HTCVENUS HTCVENUS 2006
+sony_prs505 MACH_SONY_PRS505 SONY_PRS505 2007
+hanlin_v3 MACH_HANLIN_V3 HANLIN_V3 2008
+sapphira MACH_SAPPHIRA SAPPHIRA 2009
+dack_sda_01 MACH_DACK_SDA_01 DACK_SDA_01 2010
+armbox MACH_ARMBOX ARMBOX 2011
+harris_rvp MACH_HARRIS_RVP HARRIS_RVP 2012
+ribaldo MACH_RIBALDO RIBALDO 2013
+agora MACH_AGORA AGORA 2014
+omap3_mini MACH_OMAP3_MINI OMAP3_MINI 2015
+a9sam6432_b MACH_A9SAM6432_B A9SAM6432_B 2016
+usg2410 MACH_USG2410 USG2410 2017
+pc72052_i10_revb MACH_PC72052_I10_REVB PC72052_I10_REVB 2018
+mx35_exm32 MACH_MX35_EXM32 MX35_EXM32 2019
+topas910 MACH_TOPAS910 TOPAS910 2020
+hyena MACH_HYENA HYENA 2021
+pospax MACH_POSPAX POSPAX 2022
+hdl_gx MACH_HDL_GX HDL_GX 2023
+ctera_4bay MACH_CTERA_4BAY CTERA_4BAY 2024
+ctera_plug_c MACH_CTERA_PLUG_C CTERA_PLUG_C 2025
+crwea_plug_i MACH_CRWEA_PLUG_I CRWEA_PLUG_I 2026
+egauge2 MACH_EGAUGE2 EGAUGE2 2027
+didj MACH_DIDJ DIDJ 2028
+m_s3c2443 MACH_MEISTER MEISTER 2029
+htcblackstone MACH_HTCBLACKSTONE HTCBLACKSTONE 2030
+cpuat9g20 MACH_CPUAT9G20 CPUAT9G20 2031
+smdk6440 MACH_SMDK6440 SMDK6440 2032
+omap_35xx_mvp MACH_OMAP_35XX_MVP OMAP_35XX_MVP 2033
+ctera_plug_i MACH_CTERA_PLUG_I CTERA_PLUG_I 2034
+pvg610_100 MACH_PVG610 PVG610 2035
+hprw6815 MACH_HPRW6815 HPRW6815 2036
+omap3_oswald MACH_OMAP3_OSWALD OMAP3_OSWALD 2037
+nas4220b MACH_NAS4220B NAS4220B 2038
+htcraphael_cdma MACH_HTCRAPHAEL_CDMA HTCRAPHAEL_CDMA 2039
+htcdiamond_cdma MACH_HTCDIAMOND_CDMA HTCDIAMOND_CDMA 2040
+scaler MACH_SCALER SCALER 2041
+zylonite2 MACH_ZYLONITE2 ZYLONITE2 2042
+aspenite MACH_ASPENITE ASPENITE 2043
+teton MACH_TETON TETON 2044
+ttc_dkb MACH_TTC_DKB TTC_DKB 2045
+bishop2 MACH_BISHOP2 BISHOP2 2046
+ippv5 MACH_IPPV5 IPPV5 2047
+farm926 MACH_FARM926 FARM926 2048
+mmccpu MACH_MMCCPU MMCCPU 2049
+sgmsfl MACH_SGMSFL SGMSFL 2050
+tt8000 MACH_TT8000 TT8000 2051
+zrn4300lp MACH_ZRN4300LP ZRN4300LP 2052
+mptc MACH_MPTC MPTC 2053
+h6051 MACH_H6051 H6051 2054
+pvg610_101 MACH_PVG610_101 PVG610_101 2055
+stamp9261_pc_evb MACH_STAMP9261_PC_EVB STAMP9261_PC_EVB 2056
+pelco_odysseus MACH_PELCO_ODYSSEUS PELCO_ODYSSEUS 2057
+tny_a9260 MACH_TNY_A9260 TNY_A9260 2058
+tny_a9g20 MACH_TNY_A9G20 TNY_A9G20 2059
+aesop_mp2530f MACH_AESOP_MP2530F AESOP_MP2530F 2060
+dx900 MACH_DX900 DX900 2061
+cpodc2 MACH_CPODC2 CPODC2 2062
+tilt_8925 MACH_TILT_8925 TILT_8925 2063
+davinci_dm357_evm MACH_DAVINCI_DM357_EVM DAVINCI_DM357_EVM 2064
+swordfish MACH_SWORDFISH SWORDFISH 2065
+corvus MACH_CORVUS CORVUS 2066
+taurus MACH_TAURUS TAURUS 2067
+axm MACH_AXM AXM 2068
+axc MACH_AXC AXC 2069
+baby MACH_BABY BABY 2070
+mp200 MACH_MP200 MP200 2071
+pcm043 MACH_PCM043 PCM043 2072
+hanlin_v3c MACH_HANLIN_V3C HANLIN_V3C 2073
+kbk9g20 MACH_KBK9G20 KBK9G20 2074
+adsturbog5 MACH_ADSTURBOG5 ADSTURBOG5 2075
+avenger_lite1 MACH_AVENGER_LITE1 AVENGER_LITE1 2076
+suc82x MACH_SUC SUC 2077
+at91sam7s256 MACH_AT91SAM7S256 AT91SAM7S256 2078
+mendoza MACH_MENDOZA MENDOZA 2079
+kira MACH_KIRA KIRA 2080
+mx1hbm MACH_MX1HBM MX1HBM 2081
+quatro43xx MACH_QUATRO43XX QUATRO43XX 2082
+quatro4230 MACH_QUATRO4230 QUATRO4230 2083
+nsb400 MACH_NSB400 NSB400 2084
+drp255 MACH_DRP255 DRP255 2085
+thoth MACH_THOTH THOTH 2086
+firestone MACH_FIRESTONE FIRESTONE 2087
+asusp750 MACH_ASUSP750 ASUSP750 2088
+ctera_dl MACH_CTERA_DL CTERA_DL 2089
+socr MACH_SOCR SOCR 2090
+htcoxygen MACH_HTCOXYGEN HTCOXYGEN 2091
+heroc MACH_HEROC HEROC 2092
+zeno6800 MACH_ZENO6800 ZENO6800 2093
+sc2mcs MACH_SC2MCS SC2MCS 2094
+gene100 MACH_GENE100 GENE100 2095
+as353x MACH_AS353X AS353X 2096
+sheevaplug MACH_SHEEVAPLUG SHEEVAPLUG 2097
+at91sam9g20 MACH_AT91SAM9G20 AT91SAM9G20 2098
+mv88f6192gtw_fe MACH_MV88F6192GTW_FE MV88F6192GTW_FE 2099
+cc9200 MACH_CC9200 CC9200 2100
+sm9200 MACH_SM9200 SM9200 2101
+tp9200 MACH_TP9200 TP9200 2102
+snapperdv MACH_SNAPPERDV SNAPPERDV 2103
+avengers_lite MACH_AVENGERS_LITE AVENGERS_LITE 2104
+avengers_lite1 MACH_AVENGERS_LITE1 AVENGERS_LITE1 2105
+omap3axon MACH_OMAP3AXON OMAP3AXON 2106
+ma8xx MACH_MA8XX MA8XX 2107
+mp201ek MACH_MP201EK MP201EK 2108
+davinci_tux MACH_DAVINCI_TUX DAVINCI_TUX 2109
+mpa1600 MACH_MPA1600 MPA1600 2110
+pelco_troy MACH_PELCO_TROY PELCO_TROY 2111
+nsb667 MACH_NSB667 NSB667 2112
+rovers5_4mpix MACH_ROVERS5_4MPIX ROVERS5_4MPIX 2113
+twocom MACH_TWOCOM TWOCOM 2114
+ubisys_p9_rcu3r2 MACH_UBISYS_P9_RCU3R2 UBISYS_P9_RCU3R2 2115
+hero_espresso MACH_HERO_ESPRESSO HERO_ESPRESSO 2116
+afeusb MACH_AFEUSB AFEUSB 2117
+t830 MACH_T830 T830 2118
+spd8020_cc MACH_SPD8020_CC SPD8020_CC 2119
+om_3d7k MACH_OM_3D7K OM_3D7K 2120
+picocom2 MACH_PICOCOM2 PICOCOM2 2121
+uwg4mx27 MACH_UWG4MX27 UWG4MX27 2122
+uwg4mx31 MACH_UWG4MX31 UWG4MX31 2123
+cherry MACH_CHERRY CHERRY 2124
+mx51_babbage MACH_MX51_BABBAGE MX51_BABBAGE 2125
+s3c2440turkiye MACH_S3C2440TURKIYE S3C2440TURKIYE 2126
+tx37 MACH_TX37 TX37 2127
+sbc2800_9g20 MACH_SBC2800_9G20 SBC2800_9G20 2128
+benzglb MACH_BENZGLB BENZGLB 2129
+benztd MACH_BENZTD BENZTD 2130
+cartesio_plus MACH_CARTESIO_PLUS CARTESIO_PLUS 2131
+solrad_g20 MACH_SOLRAD_G20 SOLRAD_G20 2132
+mx27wallace MACH_MX27WALLACE MX27WALLACE 2133
+fmzwebmodul MACH_FMZWEBMODUL FMZWEBMODUL 2134
+rd78x00_masa MACH_RD78X00_MASA RD78X00_MASA 2135
+smallogger MACH_SMALLOGGER SMALLOGGER 2136
This option enables support for MIPS Technologies MIPSsim software
emulator.
-config MACH_EMMA
- bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+ bool "NEC EMMA2RH Mark-eins board"
+ select SOC_EMMA2RH
+ select HW_HAS_PCI
+ help
+ This enables support for the NEC Electronics Mark-eins boards.
config MACH_VR41XX
bool "NEC VR4100 series based machines"
source "arch/mips/alchemy/Kconfig"
source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
source "arch/mips/pmc-sierra/Kconfig"
bool
select SERIAL_RM9000
+config SOC_EMMA2RH
+ bool
+ select CEVT_R4K
+ select CSRC_R4K
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SWAP_IO_SPACE
+ select SYS_HAS_CPU_R5500
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+
config SOC_PNX833X
bool
select CEVT_R4K
config SWAP_IO_SPACE
bool
-config EMMA2RH
- bool
- depends on MARKEINS
- default y
-
config SERIAL_RM9000
bool
#
# Common NEC EMMAXXX
#
-core-$(CONFIG_SOC_EMMA) += arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH) += arch/mips/emma/common/
cflags-$(CONFIG_SOC_EMMA2RH) += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
#
# CONFIG_PNX8550_STB810 is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_IRQ_CPU=y
CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
#
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PLATRAM is not set
#
+++ /dev/null
-choice
- prompt "Machine type"
- depends on MACH_EMMA
- default NEC_MARKEINS
-
-config NEC_MARKEINS
- bool "NEC EMMA2RH Mark-eins board"
- select SOC_EMMA2RH
- select HW_HAS_PCI
- help
- This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
- bool
- select SOC_EMMA
- select SYS_HAS_CPU_R5500
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
- bool
- select CEVT_R4K
- select CSRC_R4K
- select DMA_NONCOHERENT
- select IRQ_CPU
- select SWAP_IO_SPACE
- select SYS_SUPPORTS_BIG_ENDIAN
},
};
-static struct platform_device *devices[] = {
- &i2c_emma_devices[0],
- &i2c_emma_devices[1],
- &i2c_emma_devices[2],
- &serial_emma,
-};
-
static struct mtd_partition markeins_parts[] = {
[0] = {
.name = "RootFS",
},
};
+static struct physmap_flash_data markeins_flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(markeins_parts),
+ .parts = markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+ .start = 0x1e000000,
+ .end = 0x02000000,
+ .flags = IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &markeins_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+ i2c_emma_devices,
+ i2c_emma_devices + 1,
+ i2c_emma_devices + 2,
+ &serial_emma,
+ &markeins_flash_device,
+};
+
static int __init platform_devices_setup(void)
{
- physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch_initcall(platform_devices_setup);
-
*/
#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-
#define __NR_seccomp_read_32 4003
#define __NR_seccomp_write_32 4004
#define __NR_seccomp_exit_32 4001
#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-
#define __NR_seccomp_read_32 6000
#define __NR_seccomp_write_32 6001
#define __NR_seccomp_exit_32 6058
#define TIF_LOAD_WATCH 25 /* If set, load watch registers */
#define TIF_SYSCALL_TRACE 31 /* syscall trace active */
+#ifdef CONFIG_MIPS32_O32
+#define TIF_32BIT TIF_32BIT_REGS
+#elif defined(CONFIG_MIPS32_N32)
+#define TIF_32BIT _TIF_32BIT_ADDR
+#endif /* CONFIG_MIPS32_O32 */
+
#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:00:07 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:55 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
# CONFIG_EISA is not set
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_ZALON is not set
CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_VSXXXAA is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_STI=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:12:44 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:56 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CPUSETS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# Processor type and features
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
# CONFIG_GSC is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
-# CONFIG_IP6_NF_MATCH_OWNER is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-CONFIG_AGP=y
-CONFIG_AGP_PARISC=y
-# CONFIG_DRM is not set
#
# PCMCIA character devices
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Graphics support
#
+CONFIG_AGP=y
+CONFIG_AGP_PARISC=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
#
# Console display driver support
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
# CONFIG_STI_CONSOLE is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
-#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:16:46 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:57 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
CONFIG_ISA=y
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
#
# PA-RISC specific drivers
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_ATA_OVER_ETH=y
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=40
# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
#
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
-#
-# CONFIG_AUXDISPLAY is not set
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_PCBC is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 21:24:00 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:58 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
# CONFIG_GSC is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
+CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
+# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_FC_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
-
-#
-# Fusion MPT device support
-#
+# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
# CONFIG_FUSION_FC is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-# CONFIG_USB_MON is not set
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
+# OTG and related infrastructure
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_RODATA=y
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Fri Oct 12 20:54:57 2007
+# Linux kernel version: 2.6.29-rc8
+# Fri Mar 13 01:32:59 2009
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
# CONFIG_HPUX is not set
#
# CONFIG_ISA is not set
CONFIG_PCI=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_IOMMU_HELPER=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# Executable file formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
-
-#
-# Networking
-#
CONFIG_NET=y
#
# Networking options
#
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_ONLYDISK=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_LASI700=y
CONFIG_53C700_LE_ON_BE=y
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
#
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
#
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_AC3200 is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_E100 is not set
# CONFIG_LNE390 is not set
# CONFIG_FEALNX is not set
# CONFIG_ES3210 is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=y
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_HIL=y
# CONFIG_INPUT_JOYSTICK is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=64
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
-# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
#
# PCMCIA character devices
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Graphics support
+# Multimedia drivers
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
#
-# Display device support
+# Graphics support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
CONFIG_SND_AD1889=y
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# GSC devices
-#
+CONFIG_SND_GSC=y
CONFIG_SND_HARMONY=y
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
# CONFIG_USB_SERIAL is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
+# OTG and related infrastructure
#
-# CONFIG_USB_GADGET is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
-# CONFIG_AUXDISPLAY is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_PARISC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_NOP_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
# CONFIG_DEBUG_RODATA is not set
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
error = count - buf.count;
}
-out_putf:
fput(file);
out:
return error;
#include <asm/asm-offsets.h>
#include <asm/page.h>
+#include <asm/types.h>
#include <asm/asmregs.h>
/* Shift Left - note the r and t can NOT be the same! */
.macro shl r, sa, t
- dep,z \r, 31-\sa, 32-\sa, \t
+ dep,z \r, 31-(\sa), 32-(\sa), \t
.endm
/* The PA 2.0 shift left */
.macro shlw r, sa, t
- depw,z \r, 31-\sa, 32-\sa, \t
+ depw,z \r, 31-(\sa), 32-(\sa), \t
.endm
/* And the PA 2.0W shift left */
.macro shld r, sa, t
- depd,z \r, 63-\sa, 64-\sa, \t
+ depd,z \r, 63-(\sa), 64-(\sa), \t
.endm
/* Shift Right - note the r and t can NOT be the same! */
.macro shr r, sa, t
- extru \r, 31-\sa, 32-\sa, \t
+ extru \r, 31-(\sa), 32-(\sa), \t
.endm
/* pa20w version of shift right */
.macro shrd r, sa, t
- extrd,u \r, 63-\sa, 64-\sa, \t
+ extrd,u \r, 63-(\sa), 64-(\sa), \t
.endm
/* load 32-bit 'value' into 'reg' compensating for the ldil
*(volatile unsigned long long __force *) addr = b;
}
-/* readb can never be const, so use __fswab instead of le*_to_cpu */
-#define readb(addr) __raw_readb(addr)
-#define readw(addr) le16_to_cpu(__raw_readw(addr))
-#define readl(addr) le32_to_cpu(__raw_readl(addr))
-#define readq(addr) le64_to_cpu(__raw_readq(addr))
-#define writeb(b, addr) __raw_writeb(b, addr)
-#define writew(b, addr) __raw_writew(cpu_to_le16(b), addr)
-#define writel(b, addr) __raw_writel(cpu_to_le32(b), addr)
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
+static inline unsigned char readb(const volatile void __iomem *addr)
+{
+ return __raw_readb(addr);
+}
+static inline unsigned short readw(const volatile void __iomem *addr)
+{
+ return le16_to_cpu(__raw_readw(addr));
+}
+static inline unsigned int readl(const volatile void __iomem *addr)
+{
+ return le32_to_cpu(__raw_readl(addr));
+}
+static inline unsigned long long readq(const volatile void __iomem *addr)
+{
+ return le64_to_cpu(__raw_readq(addr));
+}
+
+static inline void writeb(unsigned char b, volatile void __iomem *addr)
+{
+ __raw_writeb(b, addr);
+}
+static inline void writew(unsigned short w, volatile void __iomem *addr)
+{
+ __raw_writew(cpu_to_le16(w), addr);
+}
+static inline void writel(unsigned int l, volatile void __iomem *addr)
+{
+ __raw_writel(cpu_to_le32(l), addr);
+}
+static inline void writeq(unsigned long long q, volatile void __iomem *addr)
+{
+ __raw_writeq(cpu_to_le64(q), addr);
+}
+
+#define readb readb
+#define readw readw
+#define readl readl
+#define readq readq
+#define writeb writeb
+#define writew writew
+#define writel writel
+#define writeq writeq
#define readb_relaxed(addr) readb(addr)
#define readw_relaxed(addr) readw(addr)
extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
extern int cpu_claim_irq(unsigned int irq, struct irq_chip *, void *);
-extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
+extern int cpu_check_affinity(unsigned int irq, const struct cpumask *dest);
/* soft power switch support (power.c) */
extern struct tasklet_struct power_tasklet;
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
+struct pt_regs;
int fixup_exception(struct pt_regs *regs);
#endif /* __PARISC_UACCESS_H */
{
int sr3;
- if (!vma->vm_mm->context) {
- BUG();
- return;
- }
+ BUG_ON(!vma->vm_mm->context);
sr3 = mfsp(3);
if (vma->vm_mm->context == sr3) {
* abstractions for the macros */
.macro EXTR reg1,start,length,reg2
#ifdef CONFIG_64BIT
- extrd,u \reg1,32+\start,\length,\reg2
+ extrd,u \reg1,32+(\start),\length,\reg2
#else
extrw,u \reg1,\start,\length,\reg2
#endif
.macro DEP reg1,start,length,reg2
#ifdef CONFIG_64BIT
- depd \reg1,32+\start,\length,\reg2
+ depd \reg1,32+(\start),\length,\reg2
#else
depw \reg1,\start,\length,\reg2
#endif
.macro DEPI val,start,length,reg
#ifdef CONFIG_64BIT
- depdi \val,32+\start,\length,\reg
+ depdi \val,32+(\start),\length,\reg
#else
depwi \val,\start,\length,\reg
#endif
}
#ifdef CONFIG_64BIT
-void __init set_firmware_width_unlocked(void)
+void __cpuinit set_firmware_width_unlocked(void)
{
int ret;
* This function must be called before any pdc_* function that uses the
* convert_to_wide function.
*/
-void __init set_firmware_width(void)
+void __cpuinit set_firmware_width(void)
{
unsigned long flags;
spin_lock_irqsave(&pdc_lock, flags);
spin_unlock_irqrestore(&pdc_lock, flags);
}
#else
-void __init set_firmware_width_unlocked(void) {
+void __cpuinit set_firmware_width_unlocked(void) {
return;
}
-void __init set_firmware_width(void) {
+void __cpuinit set_firmware_width(void) {
return;
}
#endif /*CONFIG_64BIT*/
return retval;
}
-int __init pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
{
int ret;
* This PDC call returns the presence and status of all the coprocessors
* attached to the processor.
*/
-int __init pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
+int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
{
int ret;
unsigned long flags;
}
#ifdef CONFIG_SMP
-int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu_dest;
if (CHECK_IRQ_PER_CPU(irq)) {
/* Bad linux design decision. The mask has already
* been set; we must reset it */
- cpumask_setall(irq_desc[irq].affinity);
+ cpumask_setall(&irq_desc[irq].affinity);
return -EINVAL;
}
/* whatever mask they set, we just allow one CPU */
cpu_dest = first_cpu(*dest);
- *dest = cpumask_of_cpu(cpu_dest);
- return 0;
+ return cpu_dest;
}
static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
{
- if (cpu_check_affinity(irq, dest))
+ int cpu_dest;
+
+ cpu_dest = cpu_check_affinity(irq, dest);
+ if (cpu_dest < 0)
return;
- cpumask_copy(irq_desc[irq].affinity, dest);
+ cpumask_copy(&irq_desc[irq].affinity, dest);
}
#endif
unsigned long txn_affinity_addr(unsigned int irq, int cpu)
{
#ifdef CONFIG_SMP
- cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+ cpumask_copy(&irq_desc[irq].affinity, cpumask_of(cpu));
#endif
return per_cpu(cpu_data, cpu).txn_addr;
irq = eirr_to_irq(eirr_val);
#ifdef CONFIG_SMP
- cpumask_copy(&dest, irq_desc[irq].affinity);
+ cpumask_copy(&dest, &irq_desc[irq].affinity);
if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) &&
!cpu_isset(smp_processor_id(), dest)) {
int cpu = first_cpu(dest);
static dma_addr_t pa11_dma_map_single(struct device *dev, void *addr, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE) {
- printk(KERN_ERR "pa11_dma_map_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
- BUG();
- }
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) addr, size);
return virt_to_phys(addr);
static void pa11_dma_unmap_single(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE) {
- printk(KERN_ERR "pa11_dma_unmap_single(PCI_DMA_NONE) called by %p\n", __builtin_return_address(0));
- BUG();
- }
+ BUG_ON(direction == DMA_NONE);
if (direction == DMA_TO_DEVICE)
return;
{
int i;
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
for (i = 0; i < nents; i++, sglist++ ) {
unsigned long vaddr = sg_virt_addr(sglist);
{
int i;
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
if (direction == DMA_TO_DEVICE)
return;
static void pa11_dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
}
static void pa11_dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, unsigned long offset, size_t size, enum dma_data_direction direction)
{
- if (direction == DMA_NONE)
- BUG();
+ BUG_ON(direction == DMA_NONE);
flush_kernel_dcache_range((unsigned long) phys_to_virt(dma_handle) + offset, size);
}
*/
max_low_pfn = max_pfn;
- if ((bootmap_pfn - bootmap_start_pfn) != bootmap_pages) {
- printk(KERN_WARNING "WARNING! bootmap sizing is messed up!\n");
- BUG();
- }
+ /* bootmap sizing messed up? */
+ BUG_ON((bootmap_pfn - bootmap_start_pfn) != bootmap_pages);
/* reserve PAGE0 pdc memory, kernel text/data/bss & bootmap */
return map;
}
+static bool piix_no_sidpr(struct ata_host *host)
+{
+ struct pci_dev *pdev = to_pci_dev(host->dev);
+
+ /*
+ * Samsung DB-P70 only has three ATA ports exposed and
+ * curiously the unconnected first port reports link online
+ * while not responding to SRST protocol causing excessive
+ * detection delay.
+ *
+ * Unfortunately, the system doesn't carry enough DMI
+ * information to identify the machine but does have subsystem
+ * vendor and device set. As it's unclear whether the
+ * subsystem vendor/device is used only for this specific
+ * board, the port can't be disabled solely with the
+ * information; however, turning off SIDPR access works around
+ * the problem. Turn it off.
+ *
+ * This problem is reported in bnc#441240.
+ *
+ * https://bugzilla.novell.com/show_bug.cgi?id=441420
+ */
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xb049) {
+ dev_printk(KERN_WARNING, host->dev,
+ "Samsung DB-P70 detected, disabling SIDPR\n");
+ return true;
+ }
+
+ return false;
+}
+
static int __devinit piix_init_sidpr(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
if (hpriv->map[i] == IDE)
return 0;
+ /* is it blacklisted? */
+ if (piix_no_sidpr(host))
+ return 0;
+
if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR))
return 0;
iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr);
udelay(20); /* FIXME: flush */
iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
/* wait the port to become ready */
return ata_sff_wait_after_reset(&ap->link, devmask, deadline);
}
/* set up device control */
- if (ap->ioaddr.ctl_addr)
+ if (ap->ioaddr.ctl_addr) {
iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+ ap->last_ctl = ap->ctl;
+ }
}
EXPORT_SYMBOL_GPL(ata_sff_postreset);
if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) {
/* set up device control for ATA_FLAG_SATA_RESET */
iowrite8(ap->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = ap->ctl;
}
DPRINTK("EXIT\n");
else
handled = mv_host_intr(host, pending_irqs);
}
- spin_unlock(&host->lock);
/* for MSI: unmask; interrupt cause bits will retrigger now */
if (using_msi)
writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+ spin_unlock(&host->lock);
+
return IRQ_RETVAL(handled);
}
ace->fsm_state, ace->id_req_count);
#endif
+ /* Verify that there is actually a CF in the slot. If not, then
+ * bail out back to the idle state and wake up all the waiters */
+ status = ace_in32(ace, ACE_STATUS);
+ if ((status & ACE_STATUS_CFDETECT) == 0) {
+ ace->fsm_state = ACE_FSM_STATE_IDLE;
+ ace->media_change = 1;
+ set_capacity(ace->gd, 0);
+ dev_info(ace->dev, "No CF in slot\n");
+
+ /* Drop all pending requests */
+ while ((req = elv_next_request(ace->queue)) != NULL)
+ end_request(req, 0);
+
+ /* Drop back to IDLE state and notify waiters */
+ ace->fsm_state = ACE_FSM_STATE_IDLE;
+ ace->id_result = -EIO;
+ while (ace->id_req_count) {
+ complete(&ace->id_completion);
+ ace->id_req_count--;
+ }
+ }
+
switch (ace->fsm_state) {
case ACE_FSM_STATE_IDLE:
/* See if there is anything to do */
return error;
}
-static struct device *next_device(struct klist_iter *i) {
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+static int
+find_quicksilver(struct device *dev, void *data)
+{
+ struct parisc_device **lba = data;
+ struct parisc_device *padev = to_parisc_device(dev);
+
+ if (IS_QUICKSILVER(padev))
+ *lba = padev;
+
+ return 0;
}
static int
int err = -1;
struct parisc_device *sba = NULL, *lba = NULL;
struct lba_device *lbadev = NULL;
- struct device *dev = NULL;
- struct klist_iter i;
if (!sba_list)
goto out;
}
/* Now search our Pluto for our precious AGP device... */
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *padev = to_parisc_device(dev);
- if (IS_QUICKSILVER(padev))
- lba = padev;
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &lba, find_quicksilver);
if (!lba) {
printk(KERN_INFO DRVPFX "No AGP devices found.\n");
rq->cmd_flags |= REQ_PREEMPT;
rq->buffer = (char *)pc;
rq->rq_disk = disk;
+
+ if (pc->req_xfer) {
+ rq->data = pc->buf;
+ rq->data_len = pc->req_xfer;
+ }
+
memcpy(rq->cmd, pc->c, 12);
if (drive->media == ide_tape)
rq->cmd[13] = REQ_IDETAPE_PC1;
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->buffer = (char *)pc;
+
+ if (pc->req_xfer) {
+ rq->data = pc->buf;
+ rq->data_len = pc->req_xfer;
+ }
+
memcpy(rq->cmd, pc->c, 12);
if (drive->media == ide_tape)
rq->cmd[13] = REQ_IDETAPE_PC1;
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
+ int i;
ide_map_sg(drive, rq);
else
hwif->sg_dma_direction = DMA_TO_DEVICE;
- return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
- hwif->sg_dma_direction);
+ i = dma_map_sg(hwif->dev, sg, hwif->sg_nents, hwif->sg_dma_direction);
+ if (i) {
+ hwif->orig_sg_nents = hwif->sg_nents;
+ hwif->sg_nents = i;
+ }
+
+ return i;
}
EXPORT_SYMBOL_GPL(ide_build_sglist);
{
ide_hwif_t *hwif = drive->hwif;
- dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
+ dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->orig_sg_nents,
hwif->sg_dma_direction);
}
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
return ide_stopped;
}
- ide_init_sg_cmd(drive, rq);
- ide_map_sg(drive, rq);
+ if (blk_fs_request(rq) || pc->req_xfer) {
+ ide_init_sg_cmd(drive, rq);
+ ide_map_sg(drive, rq);
+ }
pc->sg = hwif->sg_table;
pc->sg_cnt = hwif->sg_nents;
static int dst_get_tuning_algo(struct dvb_frontend *fe)
{
- return dst_algo;
+ return dst_algo ? DVBFE_ALGO_HW : DVBFE_ALGO_SW;
}
static int dst_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p)
dprintk("%s() Finalised property cache\n", __func__);
dtv_property_cache_submit(fe);
- /* Request the search algorithm to search */
- fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
-
r |= dvb_frontend_ioctl_legacy(inode, file, FE_SET_FRONTEND,
&fepriv->parameters);
break;
fepriv->min_delay = (dvb_override_tune_delay * HZ) / 1000;
fepriv->state = FESTATE_RETUNE;
+
+ /* Request the search algorithm to search */
+ fepriv->algo_status |= DVBFE_ALGO_SEARCH_AGAIN;
+
dvb_frontend_wakeup(fe);
dvb_frontend_add_event(fe, 0);
fepriv->status = 0;
}
if (range > 0)
- internal->sub_range = MIN(internal->srch_range, range);
+ internal->sub_range = min(internal->srch_range, range);
else
internal->sub_range = 0;
timing = stb0899_read_reg(state, STB0899_RTF);
if (lock >= 42) {
- if ((lock > 48) && (ABS(timing) >= 110)) {
+ if ((lock > 48) && (abs(timing) >= 110)) {
internal->status = ANALOGCARRIER;
dprintk(state->verbose, FE_DEBUG, 1, "-->ANALOG Carrier !");
} else {
index++;
derot_freq += index * internal->direction * derot_step; /* next derot zig zag position */
- if (ABS(derot_freq) > derot_limit)
+ if (abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
last_derot_freq = derot_freq;
derot_freq += index * internal->direction * internal->derot_step; /* next zig zag derotator position */
- if(ABS(derot_freq) > derot_limit)
+ if(abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
if ((internal->status != CARRIEROK) || (stb0899_check_data(state) != DATAOK)) {
derot_freq += index * internal->direction * derot_step; /* next zig zag derotator position */
- if (ABS(derot_freq) > derot_limit)
+ if (abs(derot_freq) > derot_limit)
next_loop--;
if (next_loop) {
if (internal->sub_dir > 0) {
old_sub_range = internal->sub_range;
- internal->sub_range = MIN((internal->srch_range / 2) -
+ internal->sub_range = min((internal->srch_range / 2) -
(internal->tuner_offst + internal->sub_range / 2),
internal->sub_range);
int i;
i = 0;
- while ((1 << i) <= ABS(number))
+ while ((1 << i) <= abs(number))
i++;
if (number == 0)
reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
old_state = reg;
/* set to burst mode */
- STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x02);
+ STB0899_SETFIELD_VAL(DISEQCMODE, reg, 0x03);
STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0x01);
stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
switch (burst) {
#define MAKEWORD32(a, b, c, d) (((a) << 24) | ((b) << 16) | ((c) << 8) | (d))
#define MAKEWORD16(a, b) (((a) << 8) | (b))
-#define MIN(x, y) ((x) <= (y) ? (x) : (y))
-#define MAX(x, y) ((x) >= (y) ? (x) : (y))
-#define ABS(x) ((x) >= 0 ? (x) : -(x))
-
#define LSB(x) ((x & 0xff))
#define MSB(y) ((y >> 8) & 0xff)
u32 freq; /* Demod internal Frequency */
u32 srate; /* Demod internal Symbol rate */
enum stb0899_fec fecrate; /* Demod internal FEC rate */
- u32 srch_range; /* Demod internal Search Range */
- u32 sub_range; /* Demod current sub range (Hz) */
- u32 tuner_step; /* Tuner step (Hz) */
- u32 tuner_offst; /* Relative offset to carrier (Hz) */
+ s32 srch_range; /* Demod internal Search Range */
+ s32 sub_range; /* Demod current sub range (Hz) */
+ s32 tuner_step; /* Tuner step (Hz) */
+ s32 tuner_offst; /* Relative offset to carrier (Hz) */
u32 tuner_bw; /* Current bandwidth of the tuner (Hz) */
s32 mclk; /* Masterclock Divider factor (binary) */
status->refclock = 27000000; /* Hz */
status->iqsense = 1;
status->bandwidth = 36000; /* kHz */
- state->bandwidth = status->bandwidth * 1000; /* MHz */
+ state->bandwidth = status->bandwidth * 1000; /* Hz */
state->reference = status->refclock / 1000; /* kHz */
/* Set default bandwidth. */
- return stb6100_set_bandwidth(fe, status->bandwidth);
+ return stb6100_set_bandwidth(fe, state->bandwidth);
}
static int stb6100_get_state(struct dvb_frontend *fe,
struct zl10353_state *state = fe->demodulator_priv;
u8 val = 0x0a;
- if (state->config.no_tuner) {
+ if (state->config.disable_i2c_gate_ctrl) {
/* No tuner attached to the internal I2C bus */
/* If set enable I2C bridge, the main I2C bus stopped hardly */
return 0;
/* set if parallel ts output is required */
int parallel_ts;
+
+ /* set if i2c_gate_ctrl disable is required */
+ u8 disable_i2c_gate_ctrl:1;
};
#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
}
/* Test some registers, but we don't know their exact meaning yet */
- if (m5602_read_sensor(sd, 0x00, prod_id, sizeof(prod_id)))
+ if (m5602_read_sensor(sd, 0x00, prod_id, 2))
+ return -ENODEV;
+ if (m5602_read_sensor(sd, 0x02, prod_id+2, 2))
+ return -ENODEV;
+ if (m5602_read_sensor(sd, 0x04, prod_id+4, 2))
return -ENODEV;
if (memcmp(prod_id, expected_prod_id, sizeof(prod_id)))
.demod_address = 0x1e>>1,
.no_tuner = 1,
.parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
};
/* ==================================================================
/* ---------------------------------------------------------------------- */
/* our structs */
-#define MAXREGS 64
+#define MAXREGS 256
struct CHIPSTATE;
typedef int (*getvalue)(int);
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
depends on VIDEO_ZORAN_ZR36060 && EXPERIMENTAL && VIDEO_V4L1
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_BT866 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
help
Support for the AverMedia 6 Eyes video surveillance card.
res = &dino_dev->hba.lmmio_space;
res->flags = IORESOURCE_MEM;
size = scnprintf(name, sizeof(name), "Dino LMMIO (%s)",
- bus->bridge->bus_id);
+ dev_name(bus->bridge));
res->name = kmalloc(size+1, GFP_KERNEL);
if(res->name)
strcpy((char *)res->name, name);
struct list_head *ln, *tmp_ln;
printk(KERN_ERR "Dino: cannot attach bus %s\n",
- bus->bridge->bus_id);
+ dev_name(bus->bridge));
/* kill the bus, we can't do anything with it */
list_for_each_safe(ln, tmp_ln, &bus->devices) {
struct pci_dev *dev = pci_dev_b(ln);
bus->resource[i+1] = &res[i];
}
- } else if(bus->self) {
+ } else if (bus->parent) {
int i;
pci_read_bridge_bases(bus);
}
DBG("DEBUG %s assigning %d [0x%lx,0x%lx]\n",
- bus->self->dev.bus_id, i,
+ dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
pci_assign_resource(bus->self, i);
DBG("DEBUG %s after assign %d [0x%lx,0x%lx]\n",
- bus->self->dev.bus_id, i,
+ dev_name(&bus->self->dev), i,
bus->self->resource[i].start,
bus->self->resource[i].end);
}
dino_current_bus = bus->subordinate + 1;
pci_bus_assign_resources(bus);
} else {
- printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n", dev->dev.bus_id, dino_current_bus);
+ printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (probably duplicate bus number %d)\n",
+ dev_name(&dev->dev), dino_current_bus);
/* increment the bus number in case of duplicates */
dino_current_bus++;
}
*irqp = irq;
}
-static struct device *next_device(struct klist_iter *i)
+struct gsc_fixup_struct {
+ void (*choose_irq)(struct parisc_device *, void *);
+ void *ctrl;
+};
+
+static int gsc_fixup_irqs_callback(struct device *dev, void *data)
{
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+ struct parisc_device *padev = to_parisc_device(dev);
+ struct gsc_fixup_struct *gf = data;
+
+ /* work-around for 715/64 and others which have parent
+ at path [5] and children at path [5/0/x] */
+ if (padev->id.hw_type == HPHW_FAULTY)
+ gsc_fixup_irqs(padev, gf->ctrl, gf->choose_irq);
+ gf->choose_irq(padev, gf->ctrl);
+
+ return 0;
}
void gsc_fixup_irqs(struct parisc_device *parent, void *ctrl,
void (*choose_irq)(struct parisc_device *, void *))
{
- struct device *dev;
- struct klist_iter i;
-
- klist_iter_init(&parent->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *padev = to_parisc_device(dev);
-
- /* work-around for 715/64 and others which have parent
- at path [5] and children at path [5/0/x] */
- if (padev->id.hw_type == HPHW_FAULTY)
- return gsc_fixup_irqs(padev, ctrl, choose_irq);
- choose_irq(padev, ctrl);
- }
- klist_iter_exit(&i);
+ struct gsc_fixup_struct data = {
+ .choose_irq = choose_irq,
+ .ctrl = ctrl,
+ };
+
+ device_for_each_child(&parent->dev, &data, gsc_fixup_irqs_callback);
}
int gsc_common_setup(struct parisc_device *parent, struct gsc_asic *gsc_asic)
}
/* Check if pcidev behind a PPB */
- if (NULL != pcidev->bus->self) {
+ if (pcidev->bus->parent) {
/* Convert pcidev INTR_PIN into something we
** can lookup in the IRT.
*/
#endif /* PCI_BRIDGE_FUNCS */
/*
- ** Locate the host slot the PPB nearest the Host bus
- ** adapter.
- */
- while (NULL != p->parent->self)
+ * Locate the host slot of the PPB.
+ */
+ while (p->parent->parent)
p = p->parent;
intr_slot = PCI_SLOT(p->self->devfn);
struct vector_info *vi = iosapic_get_vector(irq);
u32 d0, d1, dummy_d0;
unsigned long flags;
+ int dest_cpu;
- if (cpu_check_affinity(irq, dest))
+ dest_cpu = cpu_check_affinity(irq, dest);
+ if (dest_cpu < 0)
return;
- vi->txn_addr = txn_affinity_addr(irq, cpumask_first(dest));
+ irq_desc[irq].affinity = cpumask_of_cpu(dest_cpu);
+ vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
spin_lock_irqsave(&iosapic_lock, flags);
/* d1 contains the destination CPU, so only want to set that
** Properly Setup MMIO resources for this bus.
** pci_alloc_primary_bus() mangles this.
*/
- if (bus->self) {
+ if (bus->parent) {
int i;
/* PCI-PCI Bridge */
pci_read_bridge_bases(bus);
** Can't fixup here anyway....garr...
*/
if (fbb_enable) {
- if (bus->self) {
+ if (bus->parent) {
u8 control;
/* enable on PPB */
(void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control);
return (void *) pdir_base;
}
-static struct device *next_device(struct klist_iter *i)
+struct ibase_data_struct {
+ struct ioc *ioc;
+ int ioc_num;
+};
+
+static int setup_ibase_imask_callback(struct device *dev, void *data)
{
- struct klist_node * n = klist_next(i);
- return n ? container_of(n, struct device, knode_parent) : NULL;
+ /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
+ extern void lba_set_iregs(struct parisc_device *, u32, u32);
+ struct parisc_device *lba = to_parisc_device(dev);
+ struct ibase_data_struct *ibd = data;
+ int rope_num = (lba->hpa.start >> 13) & 0xf;
+ if (rope_num >> 3 == ibd->ioc_num)
+ lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask);
+ return 0;
}
/* setup Mercury or Elroy IBASE/IMASK registers. */
static void
setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
{
- /* lba_set_iregs() is in drivers/parisc/lba_pci.c */
- extern void lba_set_iregs(struct parisc_device *, u32, u32);
- struct device *dev;
- struct klist_iter i;
-
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- int rope_num = (lba->hpa.start >> 13) & 0xf;
- if (rope_num >> 3 == ioc_num)
- lba_set_iregs(lba, ioc->ibase, ioc->imask);
- }
- klist_iter_exit(&i);
+ struct ibase_data_struct ibase_data = {
+ .ioc = ioc,
+ .ioc_num = ioc_num,
+ };
+
+ device_for_each_child(&sba->dev, &ibase_data,
+ setup_ibase_imask_callback);
+}
+
+#ifdef SBA_AGP_SUPPORT
+static int
+sba_ioc_find_quicksilver(struct device *dev, void *data)
+{
+ int *agp_found = data;
+ struct parisc_device *lba = to_parisc_device(dev);
+
+ if (IS_QUICKSILVER(lba))
+ *agp_found = 1;
+ return 0;
}
+#endif
static void
sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM);
#ifdef SBA_AGP_SUPPORT
-{
- struct klist_iter i;
- struct device *dev = NULL;
/*
** If an AGP device is present, only use half of the IOV space
** We program the next pdir index after we stop w/ a key for
** the GART code to handshake on.
*/
- klist_iter_init(&sba->dev.klist_children, &i);
- while ((dev = next_device(&i))) {
- struct parisc_device *lba = to_parisc_device(dev);
- if (IS_QUICKSILVER(lba))
- agp_found = 1;
- }
- klist_iter_exit(&i);
+ device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver);
if (agp_found && sba_reserve_agpgart) {
printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
ioc->pdir_size /= 2;
ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
}
-}
#endif /*SBA_AGP_SUPPORT*/
-
}
static void
static DEFINE_MUTEX(fcoe_transports_lock);
/**
- * fcoe_transport_default - returns ptr to the default transport fcoe_sw
- **/
+ * fcoe_transport_default() - Returns ptr to the default transport fcoe_sw
+ */
struct fcoe_transport *fcoe_transport_default(void)
{
return &fcoe_sw_transport;
}
/**
- * fcoe_transport_to_pcidev - get the pci dev from a netdev
+ * fcoe_transport_to_pcidev() - get the pci dev from a netdev
* @netdev: the netdev that pci dev will be retrived from
*
* Returns: NULL or the corrsponding pci_dev
- **/
+ */
struct pci_dev *fcoe_transport_pcidev(const struct net_device *netdev)
{
if (!netdev->dev.parent)
}
/**
- * fcoe_transport_device_lookup - find out netdev is managed by the
- * transport
- * assign a transport to a device
+ * fcoe_transport_device_lookup() - Lookup a transport
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
-static struct fcoe_transport_internal *fcoe_transport_device_lookup(
- struct fcoe_transport *t, struct net_device *netdev)
+ */
+static struct fcoe_transport_internal *
+fcoe_transport_device_lookup(struct fcoe_transport *t,
+ struct net_device *netdev)
{
struct fcoe_transport_internal *ti;
return NULL;
}
/**
- * fcoe_transport_device_add - assign a transport to a device
+ * fcoe_transport_device_add() - Assign a transport to a device
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
+ */
static int fcoe_transport_device_add(struct fcoe_transport *t,
struct net_device *netdev)
{
}
/**
- * fcoe_transport_device_remove - remove a device from its transport
+ * fcoe_transport_device_remove() - Remove a device from its transport
* @netdev: the netdev the transport to be attached to
*
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
* not manage this device any more
*
* Returns: 0 for success
- **/
+ */
static int fcoe_transport_device_remove(struct fcoe_transport *t,
struct net_device *netdev)
{
}
/**
- * fcoe_transport_device_remove_all - remove all from transport devlist
+ * fcoe_transport_device_remove_all() - Remove all from transport devlist
*
- * this removes the device from the transport so the given transport will
+ * This removes the device from the transport so the given transport will
* not manage this device any more
*
* Returns: 0 for success
- **/
+ */
static void fcoe_transport_device_remove_all(struct fcoe_transport *t)
{
struct fcoe_transport_internal *ti, *tmp;
}
/**
- * fcoe_transport_match - use the bus device match function to match the hw
- * @t: the fcoe transport
- * @netdev:
+ * fcoe_transport_match() - Use the bus device match function to match the hw
+ * @t: The fcoe transport to check
+ * @netdev: The netdev to match against
*
- * This function is used to check if the givne transport wants to manage the
+ * This function is used to check if the given transport wants to manage the
* input netdev. if the transports implements the match function, it will be
* called, o.w. we just compare the pci vendor and device id.
*
* Returns: true for match up
- **/
+ */
static bool fcoe_transport_match(struct fcoe_transport *t,
- struct net_device *netdev)
+ struct net_device *netdev)
{
/* match transport by vendor and device id */
struct pci_dev *pci;
}
/**
- * fcoe_transport_lookup - check if the transport is already registered
+ * fcoe_transport_lookup() - Check if the transport is already registered
* @t: the transport to be looked up
*
* This compares the parent device (pci) vendor and device id
*
* Returns: NULL if not found
*
- * TODO - return default sw transport if no other transport is found
- **/
-static struct fcoe_transport *fcoe_transport_lookup(
- struct net_device *netdev)
+ * TODO: return default sw transport if no other transport is found
+ */
+static struct fcoe_transport *
+fcoe_transport_lookup(struct net_device *netdev)
{
struct fcoe_transport *t;
}
/**
- * fcoe_transport_register - adds a fcoe transport to the fcoe transports list
+ * fcoe_transport_register() - Adds a fcoe transport to the fcoe transports list
* @t: ptr to the fcoe transport to be added
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_register(struct fcoe_transport *t)
{
struct fcoe_transport *tt;
list_add_tail(&t->list, &fcoe_transports);
mutex_unlock(&fcoe_transports_lock);
- mutex_init(&t->devlock);
- INIT_LIST_HEAD(&t->devlist);
-
printk(KERN_DEBUG "fcoe_transport_register:%s\n", t->name);
return 0;
EXPORT_SYMBOL_GPL(fcoe_transport_register);
/**
- * fcoe_transport_unregister - remove the tranport fro the fcoe transports list
+ * fcoe_transport_unregister() - Remove the tranport fro the fcoe transports list
* @t: ptr to the fcoe transport to be removed
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_unregister(struct fcoe_transport *t)
{
struct fcoe_transport *tt, *tmp;
}
EXPORT_SYMBOL_GPL(fcoe_transport_unregister);
-/*
- * fcoe_load_transport_driver - load an offload driver by alias name
+/**
+ * fcoe_load_transport_driver() - Load an offload driver by alias name
* @netdev: the target net device
*
* Requests for an offload driver module as the fcoe transport, if fails, it
* 3. pure hw fcoe hba may not have netdev
*
* Returns: 0 for success
- **/
+ */
int fcoe_load_transport_driver(struct net_device *netdev)
{
struct pci_dev *pci;
EXPORT_SYMBOL_GPL(fcoe_load_transport_driver);
/**
- * fcoe_transport_attach - load transport to fcoe
+ * fcoe_transport_attach() - Load transport to fcoe
* @netdev: the netdev the transport to be attached to
*
* This will look for existing offload driver, if not found, it falls back to
* the default sw hba (fcoe_sw) as its fcoe transport.
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_attach(struct net_device *netdev)
{
struct fcoe_transport *t;
EXPORT_SYMBOL_GPL(fcoe_transport_attach);
/**
- * fcoe_transport_release - unload transport from fcoe
+ * fcoe_transport_release() - Unload transport from fcoe
* @netdev: the net device on which fcoe is to be released
*
* Returns: 0 for success
- **/
+ */
int fcoe_transport_release(struct net_device *netdev)
{
struct fcoe_transport *t;
EXPORT_SYMBOL_GPL(fcoe_transport_release);
/**
- * fcoe_transport_init - initializes fcoe transport layer
+ * fcoe_transport_init() - Initializes fcoe transport layer
*
* This prepares for the fcoe transport layer
*
* Returns: none
- **/
+ */
int __init fcoe_transport_init(void)
{
INIT_LIST_HEAD(&fcoe_transports);
}
/**
- * fcoe_transport_exit - cleans up the fcoe transport layer
+ * fcoe_transport_exit() - Cleans up the fcoe transport layer
+ *
* This cleans up the fcoe transport layer. removing any transport on the list,
* note that the transport destroy func is not called here.
*
* Returns: none
- **/
+ */
int __exit fcoe_transport_exit(void)
{
struct fcoe_transport *t, *tmp;
.max_sectors = 0xffff,
};
-/*
- * fcoe_sw_lport_config - sets up the fc_lport
+/**
+ * fcoe_sw_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
* @shost: ptr to the parent scsi host
*
* Returns: 0 for success
- *
*/
static int fcoe_sw_lport_config(struct fc_lport *lp)
{
int i = 0;
- lp->link_status = 0;
+ lp->link_up = 0;
+ lp->qfull = 0;
lp->max_retry_count = 3;
lp->e_d_tov = 2 * 1000; /* FC-FS default */
lp->r_a_tov = 2 * 2 * 1000;
return 0;
}
-/*
- * fcoe_sw_netdev_config - sets up fcoe_softc for lport and network
- * related properties
+/**
+ * fcoe_sw_netdev_config() - Set up netdev for SW FCoE
* @lp : ptr to the fc_lport
* @netdev : ptr to the associated netdevice struct
*
* Must be called after fcoe_sw_lport_config() as it will use lport mutex
*
* Returns : 0 for success
- *
*/
static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
{
if (fc_set_mfs(lp, mfs))
return -EINVAL;
- lp->link_status = ~FC_PAUSE & ~FC_LINK_UP;
if (!fcoe_link_ok(lp))
- lp->link_status |= FC_LINK_UP;
+ lp->link_up = 1;
/* offload features support */
if (fc->real_dev->features & NETIF_F_SG)
skb_queue_head_init(&fc->fcoe_pending_queue);
+ fc->fcoe_pending_queue_active = 0;
/* setup Source Mac Address */
memcpy(fc->ctl_src_addr, fc->real_dev->dev_addr,
return 0;
}
-/*
- * fcoe_sw_shost_config - sets up fc_lport->host
+/**
+ * fcoe_sw_shost_config() - Sets up fc_lport->host
* @lp : ptr to the fc_lport
* @shost : ptr to the associated scsi host
* @dev : device associated to scsi host
*
- * Must be called after fcoe_sw_lport_config) and fcoe_sw_netdev_config()
+ * Must be called after fcoe_sw_lport_config() and fcoe_sw_netdev_config()
*
* Returns : 0 for success
- *
*/
static int fcoe_sw_shost_config(struct fc_lport *lp, struct Scsi_Host *shost,
struct device *dev)
return 0;
}
-/*
- * fcoe_sw_em_config - allocates em for this lport
+/**
+ * fcoe_sw_em_config() - allocates em for this lport
* @lp: the port that em is to allocated for
*
* Returns : 0 on success
return 0;
}
-/*
- * fcoe_sw_destroy - FCoE software HBA tear-down function
+/**
+ * fcoe_sw_destroy() - FCoE software HBA tear-down function
* @netdev: ptr to the associated net_device
*
* Returns: 0 if link is OK for use by FCoE.
if (!lp)
return -ENODEV;
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
/* Logout of the fabric */
fc_fabric_logoff(lp);
.frame_send = fcoe_xmit,
};
-/*
- * fcoe_sw_create - this function creates the fcoe interface
+/**
+ * fcoe_sw_create() - this function creates the fcoe interface
* @netdev: pointer the associated netdevice
*
* Creates fc_lport struct and scsi_host for lport, configures lport
return rc;
}
-/*
- * fcoe_sw_match - the fcoe sw transport match function
+/**
+ * fcoe_sw_match() - The FCoE SW transport match function
*
* Returns : false always
*/
.device = 0xffff,
};
-/*
- * fcoe_sw_init - registers fcoe_sw_transport
+/**
+ * fcoe_sw_init() - Registers fcoe_sw_transport
*
* Returns : 0 on success
*/
/* attach to scsi transport */
scsi_transport_fcoe_sw =
fc_attach_transport(&fcoe_sw_transport_function);
+
if (!scsi_transport_fcoe_sw) {
printk(KERN_ERR "fcoe_sw_init:fc_attach_transport() failed\n");
return -ENODEV;
}
+
+ mutex_init(&fcoe_sw_transport.devlock);
+ INIT_LIST_HEAD(&fcoe_sw_transport.devlist);
+
/* register sw transport */
fcoe_transport_register(&fcoe_sw_transport);
return 0;
}
-/*
- * fcoe_sw_exit - unregisters fcoe_sw_transport
+/**
+ * fcoe_sw_exit() - Unregisters fcoe_sw_transport
*
* Returns : 0 on success
*/
static int debug_fcoe;
#define FCOE_MAX_QUEUE_DEPTH 256
+#define FCOE_LOW_QUEUE_DEPTH 32
/* destination address mode */
#define FCOE_GW_ADDR_MODE 0x00
/* Function Prototyes */
static int fcoe_check_wait_queue(struct fc_lport *);
-static void fcoe_insert_wait_queue_head(struct fc_lport *, struct sk_buff *);
-static void fcoe_insert_wait_queue(struct fc_lport *, struct sk_buff *);
static void fcoe_recv_flogi(struct fcoe_softc *, struct fc_frame *, u8 *);
#ifdef CONFIG_HOTPLUG_CPU
static int fcoe_cpu_callback(struct notifier_block *, ulong, void *);
};
/**
- * fcoe_create_percpu_data - creates the associated cpu data
+ * fcoe_create_percpu_data() - creates the associated cpu data
* @cpu: index for the cpu where fcoe cpu data will be created
*
* create percpu stats block, from cpu add notifier
*
* Returns: none
- **/
+ */
static void fcoe_create_percpu_data(int cpu)
{
struct fc_lport *lp;
}
/**
- * fcoe_destroy_percpu_data - destroys the associated cpu data
+ * fcoe_destroy_percpu_data() - destroys the associated cpu data
* @cpu: index for the cpu where fcoe cpu data will destroyed
*
* destroy percpu stats block called by cpu add/remove notifier
*
* Retuns: none
- **/
+ */
static void fcoe_destroy_percpu_data(int cpu)
{
struct fc_lport *lp;
}
/**
- * fcoe_cpu_callback - fcoe cpu hotplug event callback
+ * fcoe_cpu_callback() - fcoe cpu hotplug event callback
* @nfb: callback data block
* @action: event triggering the callback
* @hcpu: index for the cpu of this event
* this creates or destroys per cpu data for fcoe
*
* Returns NOTIFY_OK always.
- **/
+ */
static int fcoe_cpu_callback(struct notifier_block *nfb, unsigned long action,
void *hcpu)
{
#endif /* CONFIG_HOTPLUG_CPU */
/**
- * fcoe_rcv - this is the fcoe receive function called by NET_RX_SOFTIRQ
+ * fcoe_rcv() - this is the fcoe receive function called by NET_RX_SOFTIRQ
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
* this function will receive the packet and build fc frame and pass it up
*
* Returns: 0 for success
- **/
+ */
int fcoe_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype, struct net_device *olddev)
{
EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
- * fcoe_start_io - pass to netdev to start xmit for fcoe
+ * fcoe_start_io() - pass to netdev to start xmit for fcoe
* @skb: the skb to be xmitted
*
* Returns: 0 for success
- **/
+ */
static inline int fcoe_start_io(struct sk_buff *skb)
{
int rc;
}
/**
- * fcoe_get_paged_crc_eof - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
* Returns: 0 for success
- **/
+ */
static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
{
struct fcoe_percpu_s *fps;
}
/**
- * fcoe_fc_crc - calculates FC CRC in this fcoe skb
+ * fcoe_fc_crc() - calculates FC CRC in this fcoe skb
* @fp: the fc_frame containg data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
- *
- **/
+ */
u32 fcoe_fc_crc(struct fc_frame *fp)
{
struct sk_buff *skb = fp_skb(fp);
EXPORT_SYMBOL_GPL(fcoe_fc_crc);
/**
- * fcoe_xmit - FCoE frame transmit function
+ * fcoe_xmit() - FCoE frame transmit function
* @lp: the associated local port
* @fp: the fc_frame to be transmitted
*
* Return : 0 for success
- *
- **/
+ */
int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
{
int wlen, rc = 0;
WARN_ON((fr_len(fp) % sizeof(u32)) != 0);
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
/*
* if it is a flogi then we need to learn gw-addr
* and my own fcid
if (skb_is_nonlinear(skb)) {
skb_frag_t *frag;
if (fcoe_get_paged_crc_eof(skb, tlen)) {
- kfree(skb);
+ kfree_skb(skb);
return -ENOMEM;
}
frag = &skb_shinfo(skb)->frags[skb_shinfo(skb)->nr_frags - 1];
rc = fcoe_start_io(skb);
if (rc) {
- fcoe_insert_wait_queue(lp, skb);
+ spin_lock_bh(&fc->fcoe_pending_queue.lock);
+ __skb_queue_tail(&fc->fcoe_pending_queue, skb);
+ spin_unlock_bh(&fc->fcoe_pending_queue.lock);
if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- fc_pause(lp);
+ lp->qfull = 1;
}
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_xmit);
-/*
- * fcoe_percpu_receive_thread - recv thread per cpu
+/**
+ * fcoe_percpu_receive_thread() - recv thread per cpu
* @arg: ptr to the fcoe per cpu struct
*
* Return: 0 for success
- *
*/
int fcoe_percpu_receive_thread(void *arg)
{
struct fcoe_softc *fc;
struct fcoe_hdr *hp;
- set_user_nice(current, 19);
+ set_user_nice(current, -20);
while (!kthread_should_stop()) {
}
/**
- * fcoe_recv_flogi - flogi receive function
+ * fcoe_recv_flogi() - flogi receive function
* @fc: associated fcoe_softc
* @fp: the recieved frame
* @sa: the source address of this flogi
* mac address for the initiator, eitehr OUI based or GW based.
*
* Returns: none
- **/
+ */
static void fcoe_recv_flogi(struct fcoe_softc *fc, struct fc_frame *fp, u8 *sa)
{
struct fc_frame_header *fh;
}
/**
- * fcoe_watchdog - fcoe timer callback
+ * fcoe_watchdog() - fcoe timer callback
* @vp:
*
- * This checks the pending queue length for fcoe and put fcoe to be paused state
+ * This checks the pending queue length for fcoe and set lport qfull
* if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
* fcoe_hostlist.
*
* Returns: 0 for success
- **/
+ */
void fcoe_watchdog(ulong vp)
{
- struct fc_lport *lp;
struct fcoe_softc *fc;
- int paused = 0;
read_lock(&fcoe_hostlist_lock);
list_for_each_entry(fc, &fcoe_hostlist, list) {
- lp = fc->lp;
- if (lp) {
- if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- paused = 1;
- if (fcoe_check_wait_queue(lp) < FCOE_MAX_QUEUE_DEPTH) {
- if (paused)
- fc_unpause(lp);
- }
- }
+ if (fc->lp)
+ fcoe_check_wait_queue(fc->lp);
}
read_unlock(&fcoe_hostlist_lock);
/**
- * fcoe_check_wait_queue - put the skb into fcoe pending xmit queue
+ * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
* @lp: the fc_port for this skb
* @skb: the associated skb to be xmitted
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
- * transmitted, return 0 if a error occurs, then restore wait_queue and
- * try again later.
+ * transmitted, return qlen or -1 if a error occurs, then restore
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
* in the wait_queue which will be emptied by the time function OR
* by the next skb transmit.
*
* Returns: 0 for success
- **/
+ */
static int fcoe_check_wait_queue(struct fc_lport *lp)
{
- int rc, unpause = 0;
- int paused = 0;
+ struct fcoe_softc *fc = lport_priv(lp);
struct sk_buff *skb;
- struct fcoe_softc *fc;
+ int rc = -1;
- fc = fcoe_softc(lp);
spin_lock_bh(&fc->fcoe_pending_queue.lock);
+ if (fc->fcoe_pending_queue_active)
+ goto out;
+ fc->fcoe_pending_queue_active = 1;
- /*
- * is this interface paused?
- */
- if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- paused = 1;
- if (fc->fcoe_pending_queue.qlen) {
- while ((skb = __skb_dequeue(&fc->fcoe_pending_queue)) != NULL) {
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- rc = fcoe_start_io(skb);
- if (rc) {
- fcoe_insert_wait_queue_head(lp, skb);
- return rc;
- }
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- }
- if (fc->fcoe_pending_queue.qlen < FCOE_MAX_QUEUE_DEPTH)
- unpause = 1;
- }
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- if ((unpause) && (paused))
- fc_unpause(lp);
- return fc->fcoe_pending_queue.qlen;
-}
-
-/**
- * fcoe_insert_wait_queue_head - puts skb to fcoe pending queue head
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue_head(struct fc_lport *lp,
- struct sk_buff *skb)
-{
- struct fcoe_softc *fc;
+ while (fc->fcoe_pending_queue.qlen) {
+ /* keep qlen > 0 until fcoe_start_io succeeds */
+ fc->fcoe_pending_queue.qlen++;
+ skb = __skb_dequeue(&fc->fcoe_pending_queue);
- fc = fcoe_softc(lp);
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- __skb_queue_head(&fc->fcoe_pending_queue, skb);
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
-}
+ spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+ rc = fcoe_start_io(skb);
+ spin_lock_bh(&fc->fcoe_pending_queue.lock);
-/**
- * fcoe_insert_wait_queue - put the skb into fcoe pending queue tail
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
- *
- * Returns: none
- **/
-static void fcoe_insert_wait_queue(struct fc_lport *lp,
- struct sk_buff *skb)
-{
- struct fcoe_softc *fc;
+ if (rc) {
+ __skb_queue_head(&fc->fcoe_pending_queue, skb);
+ /* undo temporary increment above */
+ fc->fcoe_pending_queue.qlen--;
+ break;
+ }
+ /* undo temporary increment above */
+ fc->fcoe_pending_queue.qlen--;
+ }
- fc = fcoe_softc(lp);
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- __skb_queue_tail(&fc->fcoe_pending_queue, skb);
+ if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
+ lp->qfull = 0;
+ fc->fcoe_pending_queue_active = 0;
+ rc = fc->fcoe_pending_queue.qlen;
+out:
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
+ return rc;
}
/**
- * fcoe_dev_setup - setup link change notification interface
- *
- **/
-static void fcoe_dev_setup(void)
+ * fcoe_dev_setup() - setup link change notification interface
+ */
+static void fcoe_dev_setup()
{
/*
* here setup a interface specific wd time to
}
/**
- * fcoe_dev_setup - cleanup link change notification interface
- **/
+ * fcoe_dev_setup() - cleanup link change notification interface
+ */
static void fcoe_dev_cleanup(void)
{
unregister_netdevice_notifier(&fcoe_notifier);
}
/**
- * fcoe_device_notification - netdev event notification callback
+ * fcoe_device_notification() - netdev event notification callback
* @notifier: context of the notification
* @event: type of event
* @ptr: fixed array for output parsed ifname
* This function is called by the ethernet driver in case of link change event
*
* Returns: 0 for success
- **/
+ */
static int fcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr)
{
struct net_device *real_dev = ptr;
struct fcoe_softc *fc;
struct fcoe_dev_stats *stats;
- u16 new_status;
+ u32 new_link_up;
u32 mfs;
int rc = NOTIFY_OK;
goto out;
}
- new_status = lp->link_status;
+ new_link_up = lp->link_up;
switch (event) {
case NETDEV_DOWN:
case NETDEV_GOING_DOWN:
- new_status &= ~FC_LINK_UP;
+ new_link_up = 0;
break;
case NETDEV_UP:
case NETDEV_CHANGE:
- new_status &= ~FC_LINK_UP;
- if (!fcoe_link_ok(lp))
- new_status |= FC_LINK_UP;
+ new_link_up = !fcoe_link_ok(lp);
break;
case NETDEV_CHANGEMTU:
mfs = fc->real_dev->mtu -
sizeof(struct fcoe_crc_eof));
if (mfs >= FC_MIN_MAX_FRAME)
fc_set_mfs(lp, mfs);
- new_status &= ~FC_LINK_UP;
- if (!fcoe_link_ok(lp))
- new_status |= FC_LINK_UP;
+ new_link_up = !fcoe_link_ok(lp);
break;
case NETDEV_REGISTER:
break;
default:
FC_DBG("unknown event %ld call", event);
}
- if (lp->link_status != new_status) {
- if ((new_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lp->link_up != new_link_up) {
+ if (new_link_up)
fc_linkup(lp);
else {
stats = lp->dev_stats[smp_processor_id()];
}
/**
- * fcoe_if_to_netdev - parse a name buffer to get netdev
+ * fcoe_if_to_netdev() - parse a name buffer to get netdev
* @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
* Returns: NULL or ptr to netdeive
- **/
+ */
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
char *cp;
}
/**
- * fcoe_netdev_to_module_owner - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
- **/
-static struct module *fcoe_netdev_to_module_owner(
- const struct net_device *netdev)
+ */
+static struct module *
+fcoe_netdev_to_module_owner(const struct net_device *netdev)
{
struct device *dev;
}
/**
- * fcoe_ethdrv_get - holds the nic driver module by try_module_get() for
- * the corresponding netdev.
+ * fcoe_ethdrv_get() - Hold the Ethernet driver
* @netdev: the target netdev
*
+ * Holds the Ethernet driver module by try_module_get() for
+ * the corresponding netdev.
+ *
* Returns: 0 for succsss
- **/
+ */
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
struct module *owner;
}
/**
- * fcoe_ethdrv_get - releases the nic driver module by module_put for
- * the corresponding netdev.
+ * fcoe_ethdrv_put() - Release the Ethernet driver
* @netdev: the target netdev
*
+ * Releases the Ethernet driver module by module_put for
+ * the corresponding netdev.
+ *
* Returns: 0 for succsss
- **/
+ */
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
struct module *owner;
}
/**
- * fcoe_destroy- handles the destroy from sysfs
+ * fcoe_destroy() - handles the destroy from sysfs
* @buffer: expcted to be a eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
- **/
+ */
static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
{
int rc;
}
/**
- * fcoe_create - handles the create call from sysfs
+ * fcoe_create() - Handles the create call from sysfs
* @buffer: expcted to be a eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
- **/
+ */
static int fcoe_create(const char *buffer, struct kernel_param *kp)
{
int rc;
__MODULE_PARM_TYPE(destroy, "string");
MODULE_PARM_DESC(destroy, "Destroy fcoe port");
-/*
- * fcoe_link_ok - check if link is ok for the fc_lport
+/**
+ * fcoe_link_ok() - Check if link is ok for the fc_lport
* @lp: ptr to the fc_lport
*
* Any permanently-disqualifying conditions have been previously checked.
*/
int fcoe_link_ok(struct fc_lport *lp)
{
- struct fcoe_softc *fc = fcoe_softc(lp);
+ struct fcoe_softc *fc = lport_priv(lp);
struct net_device *dev = fc->real_dev;
struct ethtool_cmd ecmd = { ETHTOOL_GSET };
int rc = 0;
}
EXPORT_SYMBOL_GPL(fcoe_link_ok);
-/*
- * fcoe_percpu_clean - frees skb of the corresponding lport from the per
- * cpu queue.
+/**
+ * fcoe_percpu_clean() - Clear the pending skbs for an lport
* @lp: the fc_lport
*/
void fcoe_percpu_clean(struct fc_lport *lp)
EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
- * fcoe_clean_pending_queue - dequeue skb and free it
+ * fcoe_clean_pending_queue() - Dequeue a skb and free it
* @lp: the corresponding fc_lport
*
* Returns: none
- **/
+ */
void fcoe_clean_pending_queue(struct fc_lport *lp)
{
struct fcoe_softc *fc = lport_priv(lp);
EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
- * libfc_host_alloc - allocate a Scsi_Host with room for the fc_lport
+ * libfc_host_alloc() - Allocate a Scsi_Host with room for the fc_lport
* @sht: ptr to the scsi host templ
* @priv_size: size of private data after fc_lport
*
* Returns: ptr to Scsi_Host
- * TODO - to libfc?
+ * TODO: to libfc?
*/
-static inline struct Scsi_Host *libfc_host_alloc(
- struct scsi_host_template *sht, int priv_size)
+static inline struct Scsi_Host *
+libfc_host_alloc(struct scsi_host_template *sht, int priv_size)
{
return scsi_host_alloc(sht, sizeof(struct fc_lport) + priv_size);
}
/**
- * fcoe_host_alloc - allocate a Scsi_Host with room for the fcoe_softc
+ * fcoe_host_alloc() - Allocate a Scsi_Host with room for the fcoe_softc
* @sht: ptr to the scsi host templ
* @priv_size: size of private data after fc_lport
*
}
EXPORT_SYMBOL_GPL(fcoe_host_alloc);
-/*
- * fcoe_reset - resets the fcoe
+/**
+ * fcoe_reset() - Resets the fcoe
* @shost: shost the reset is from
*
* Returns: always 0
}
EXPORT_SYMBOL_GPL(fcoe_reset);
-/*
- * fcoe_wwn_from_mac - converts 48-bit IEEE MAC address to 64-bit FC WWN.
+/**
+ * fcoe_wwn_from_mac() - Converts 48-bit IEEE MAC address to 64-bit FC WWN.
* @mac: mac address
* @scheme: check port
* @port: port indicator for converting
return wwn;
}
EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac);
-/*
- * fcoe_hostlist_lookup_softc - find the corresponding lport by a given device
+
+/**
+ * fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
* @device: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
-static struct fcoe_softc *fcoe_hostlist_lookup_softc(
- const struct net_device *dev)
+static struct fcoe_softc *
+fcoe_hostlist_lookup_softc(const struct net_device *dev)
{
struct fcoe_softc *fc;
return NULL;
}
-/*
- * fcoe_hostlist_lookup - find the corresponding lport by netdev
+/**
+ * fcoe_hostlist_lookup() - Find the corresponding lport by netdev
* @netdev: ptr to net_device
*
* Returns: 0 for success
}
EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
-/*
- * fcoe_hostlist_add - add a lport to lports list
+/**
+ * fcoe_hostlist_add() - Add a lport to lports list
* @lp: ptr to the fc_lport to badded
*
* Returns: 0 for success
fc = fcoe_hostlist_lookup_softc(fcoe_netdev(lp));
if (!fc) {
- fc = fcoe_softc(lp);
+ fc = lport_priv(lp);
write_lock_bh(&fcoe_hostlist_lock);
list_add_tail(&fc->list, &fcoe_hostlist);
write_unlock_bh(&fcoe_hostlist_lock);
}
EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
-/*
- * fcoe_hostlist_remove - remove a lport from lports list
+/**
+ * fcoe_hostlist_remove() - remove a lport from lports list
* @lp: ptr to the fc_lport to badded
*
* Returns: 0 for success
EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
- * fcoe_libfc_config - sets up libfc related properties for lport
+ * fcoe_libfc_config() - sets up libfc related properties for lport
* @lp: ptr to the fc_lport
* @tt: libfc function template
*
* Returns : 0 for success
- **/
+ */
int fcoe_libfc_config(struct fc_lport *lp, struct libfc_function_template *tt)
{
/* Set the function pointers set by the LLDD */
EXPORT_SYMBOL_GPL(fcoe_libfc_config);
/**
- * fcoe_init - fcoe module loading initialization
+ * fcoe_init() - fcoe module loading initialization
*
* Initialization routine
* 1. Will create fc transport software structure
* 2. initialize the link list of port information structure
*
* Returns 0 on success, negative on failure
- **/
+ */
static int __init fcoe_init(void)
{
int cpu;
} else {
fcoe_percpu[cpu] = NULL;
kfree(p);
-
}
}
}
*/
fcoe_dev_setup();
- init_timer(&fcoe_timer);
- fcoe_timer.data = 0;
- fcoe_timer.function = fcoe_watchdog;
- fcoe_timer.expires = (jiffies + (10 * HZ));
- add_timer(&fcoe_timer);
+ setup_timer(&fcoe_timer, fcoe_watchdog, 0);
+
+ mod_timer(&fcoe_timer, jiffies + (10 * HZ));
/* initiatlize the fcoe transport */
fcoe_transport_init();
module_init(fcoe_init);
/**
- * fcoe_exit - fcoe module unloading cleanup
+ * fcoe_exit() - fcoe module unloading cleanup
*
* Returns 0 on success, negative on failure
- **/
+ */
static void __exit fcoe_exit(void)
{
u32 idx;
*/
del_timer_sync(&fcoe_timer);
- /* releases the assocaited fcoe transport for each lport */
+ /* releases the associated fcoe transport for each lport */
list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
fcoe_transport_release(fc->real_dev);
hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
if (!hostdata) {
- dev_printk(KERN_ERR, dev, "Failed to allocate host data\n");
+ dev_printk(KERN_ERR, &dev->dev, "Failed to allocate host data\n");
return -ENOMEM;
}
static void fc_disc_restart(struct fc_disc *);
/**
- * fc_disc_lookup_rport - lookup a remote port by port_id
+ * fc_disc_lookup_rport() - lookup a remote port by port_id
* @lport: Fibre Channel host port instance
* @port_id: remote port port_id to match
*/
}
/**
- * fc_disc_stop_rports - delete all the remote ports associated with the lport
+ * fc_disc_stop_rports() - delete all the remote ports associated with the lport
* @disc: The discovery job to stop rports on
*
* Locking Note: This function expects that the lport mutex is locked before
}
/**
- * fc_disc_rport_callback - Event handler for rport events
+ * fc_disc_rport_callback() - Event handler for rport events
* @lport: The lport which is receiving the event
* @rport: The rport which the event has occured on
* @event: The event that occured
}
/**
- * fc_disc_recv_rscn_req - Handle Registered State Change Notification (RSCN)
+ * fc_disc_recv_rscn_req() - Handle Registered State Change Notification (RSCN)
* @sp: Current sequence of the RSCN exchange
* @fp: RSCN Frame
* @lport: Fibre Channel host port instance
list_del(&dp->peers);
rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
if (rport) {
- rdata = RPORT_TO_PRIV(rport);
+ rdata = rport->dd_data;
list_del(&rdata->peers);
lport->tt.rport_logoff(rport);
}
}
/**
- * fc_disc_recv_req - Handle incoming requests
+ * fc_disc_recv_req() - Handle incoming requests
* @sp: Current sequence of the request exchange
* @fp: The frame
* @lport: The FC local port
}
/**
- * fc_disc_restart - Restart discovery
+ * fc_disc_restart() - Restart discovery
* @lport: FC discovery context
*
* Locking Note: This function expects that the disc mutex
}
/**
- * fc_disc_start - Fibre Channel Target discovery
+ * fc_disc_start() - Fibre Channel Target discovery
* @lport: FC local port
*
* Returns non-zero if discovery cannot be started.
};
/**
- * fc_disc_new_target - Handle new target found by discovery
+ * fc_disc_new_target() - Handle new target found by discovery
* @lport: FC local port
* @rport: The previous FC remote port (NULL if new remote port)
* @ids: Identifiers for the new FC remote port
struct fc_rport_identifiers *ids)
{
struct fc_lport *lport = disc->lport;
- struct fc_rport_libfc_priv *rp;
+ struct fc_rport_libfc_priv *rdata;
int error = 0;
if (rport && ids->port_name) {
dp.ids.port_name = ids->port_name;
dp.ids.node_name = ids->node_name;
dp.ids.roles = ids->roles;
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
}
if (!rport)
error = -ENOMEM;
}
if (rport) {
- rp = rport->dd_data;
- rp->ops = &fc_disc_rport_ops;
- rp->rp_state = RPORT_ST_INIT;
+ rdata = rport->dd_data;
+ rdata->ops = &fc_disc_rport_ops;
+ rdata->rp_state = RPORT_ST_INIT;
lport->tt.rport_login(rport);
}
}
}
/**
- * fc_disc_del_target - Delete a target
+ * fc_disc_del_target() - Delete a target
* @disc: FC discovery context
* @rport: The remote port to be removed
*/
static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
{
struct fc_lport *lport = disc->lport;
- struct fc_rport_libfc_priv *rdata = RPORT_TO_PRIV(rport);
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
list_del(&rdata->peers);
lport->tt.rport_logoff(rport);
}
/**
- * fc_disc_done - Discovery has been completed
+ * fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
*/
static void fc_disc_done(struct fc_disc *disc)
}
/**
- * fc_disc_error - Handle error on dNS request
+ * fc_disc_error() - Handle error on dNS request
* @disc: FC discovery context
* @fp: The frame pointer
*/
}
/**
- * fc_disc_gpn_ft_req - Send Get Port Names by FC-4 type (GPN_FT) request
+ * fc_disc_gpn_ft_req() - Send Get Port Names by FC-4 type (GPN_FT) request
* @lport: FC discovery context
*
* Locking Note: This function expects that the disc_mutex is locked
}
/**
- * fc_disc_gpn_ft_parse - Parse the list of IDs and names resulting from a request
+ * fc_disc_gpn_ft_parse() - Parse the list of IDs and names resulting from a request
* @lport: Fibre Channel host port instance
* @buf: GPN_FT response buffer
* @len: size of response buffer
if ((dp.ids.port_id != fc_host_port_id(lport->host)) &&
(dp.ids.port_name != lport->wwpn)) {
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
if (rport) {
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
return error;
}
-/*
+/**
+ * fc_disc_timeout() - Retry handler for the disc component
+ * @work: Structure holding disc obj that needs retry discovery
+ *
* Handle retry of memory allocation for remote ports.
*/
static void fc_disc_timeout(struct work_struct *work)
}
/**
- * fc_disc_gpn_ft_resp - Handle a response frame from Get Port Names (GPN_FT)
+ * fc_disc_gpn_ft_resp() - Handle a response frame from Get Port Names (GPN_FT)
* @sp: Current sequence of GPN_FT exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
fr_len(fp));
} else if (ntohs(cp->ct_cmd) == FC_FS_ACC) {
- /*
- * Accepted. Parse response.
- */
+ /* Accepted, parse the response. */
buf = cp + 1;
len -= sizeof(*cp);
} else if (ntohs(cp->ct_cmd) == FC_FS_RJT) {
}
/**
- * fc_disc_single - Discover the directory information for a single target
+ * fc_disc_single() - Discover the directory information for a single target
* @lport: FC local port
* @dp: The port to rediscover
*
if (rport)
fc_disc_del_target(disc, rport);
- new_rport = fc_rport_rogue_create(dp);
+ new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
}
/**
- * fc_disc_stop - Stop discovery for a given lport
+ * fc_disc_stop() - Stop discovery for a given lport
* @lport: The lport that discovery should stop for
*/
void fc_disc_stop(struct fc_lport *lport)
}
/**
- * fc_disc_stop_final - Stop discovery for a given lport
+ * fc_disc_stop_final() - Stop discovery for a given lport
* @lport: The lport that discovery should stop for
*
* This function will block until discovery has been
}
/**
- * fc_disc_init - Initialize the discovery block
+ * fc_disc_init() - Initialize the discovery block
* @lport: FC local port
*/
int fc_disc_init(struct fc_lport *lport)
#include <scsi/libfc.h>
#include <scsi/fc_encode.h>
-#define FC_DEF_R_A_TOV (10 * 1000) /* resource allocation timeout */
-
/*
* fc_exch_debug can be set in debugger or at compile time to get more logs.
*/
{
struct fc_exch *ep;
struct fc_frame_header *fh;
- u16 rxid;
ep = mp->lp->tt.exch_get(mp->lp, fp);
if (ep) {
if ((ntoh24(fh->fh_f_ctl) & FC_FC_SEQ_INIT) == 0)
ep->esb_stat &= ~ESB_ST_SEQ_INIT;
- /*
- * Set the responder ID in the frame header.
- * The old one should've been 0xffff.
- * If it isn't, don't assign one.
- * Incoming basic link service frames may specify
- * a referenced RX_ID.
- */
- if (fh->fh_type != FC_TYPE_BLS) {
- rxid = ntohs(fh->fh_rx_id);
- WARN_ON(rxid != FC_XID_UNKNOWN);
- fh->fh_rx_id = htons(ep->rxid);
- }
fc_exch_hold(ep); /* hold for caller */
spin_unlock_bh(&ep->ex_lock); /* lock from exch_get */
}
* If fc_pf_rjt_reason is FC_RJT_NONE then this function will have a hold
* on the ep that should be released by the caller.
*/
-static enum fc_pf_rjt_reason
-fc_seq_lookup_recip(struct fc_exch_mgr *mp, struct fc_frame *fp)
+static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_exch_mgr *mp,
+ struct fc_frame *fp)
{
struct fc_frame_header *fh = fc_frame_header_get(fp);
struct fc_exch *ep = NULL;
* Send BLS Reject.
* This is for rejecting BA_ABTS only.
*/
-static void
-fc_exch_send_ba_rjt(struct fc_frame *rx_fp, enum fc_ba_rjt_reason reason,
- enum fc_ba_rjt_explan explan)
+static void fc_exch_send_ba_rjt(struct fc_frame *rx_fp,
+ enum fc_ba_rjt_reason reason,
+ enum fc_ba_rjt_explan explan)
{
struct fc_frame *fp;
struct fc_frame_header *rx_fh;
ap->ba_high_seq_cnt = fh->fh_seq_cnt;
ap->ba_low_seq_cnt = htons(sp->cnt);
}
- sp = fc_seq_start_next(sp);
+ sp = fc_seq_start_next_locked(sp);
spin_unlock_bh(&ep->ex_lock);
fc_seq_send_last(sp, fp, FC_RCTL_BA_ACC, FC_TYPE_BLS);
fc_frame_free(rx_fp);
* If sid is non-zero, reset only exchanges we source from that FID.
* If did is non-zero, reset only exchanges destined to that FID.
*/
-void fc_exch_mgr_reset(struct fc_exch_mgr *mp, u32 sid, u32 did)
+void fc_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
{
struct fc_exch *ep;
struct fc_exch *next;
+ struct fc_exch_mgr *mp = lp->emp;
spin_lock_bh(&mp->em_lock);
restart:
if (IS_ERR(fp)) {
int err = PTR_ERR(fp);
- if (err == -FC_EX_CLOSED)
+ if (err == -FC_EX_CLOSED || err == -FC_EX_TIMEOUT)
goto cleanup;
FC_DBG("Cannot process RRQ, because of frame error %d\n", err);
return;
}
/**
- * fc_fcp_pkt_release - release hold on scsi_pkt packet
+ * fc_fcp_pkt_release() - release hold on scsi_pkt packet
* @fsp: fcp packet struct
*
* This is used by upper layer scsi driver.
}
/**
- * fc_fcp_pkt_destory - release hold on scsi_pkt packet
- *
+ * fc_fcp_pkt_destory() - release hold on scsi_pkt packet
* @seq: exchange sequence
* @fsp: fcp packet struct
*
}
/**
- * fc_fcp_lock_pkt - lock a packet and get a ref to it.
+ * fc_fcp_lock_pkt() - lock a packet and get a ref to it.
* @fsp: fcp packet
*
* We should only return error if we return a command to scsi-ml before
buf = fc_frame_payload_get(fp, 0);
if (offset + len > fsp->data_len) {
- /*
- * this should never happen
- */
+ /* this should never happen */
if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
fc_frame_crc_check(fp))
goto crc_err;
fc_fcp_complete_locked(fsp);
}
-/*
- * fc_fcp_send_data - Send SCSI data to target.
+/**
+ * fc_fcp_send_data() - Send SCSI data to target.
* @fsp: ptr to fc_fcp_pkt
* @sp: ptr to this sequence
* @offset: starting offset for this data request
}
}
-/*
- * fc_fcp_reduce_can_queue - drop can_queue
+/**
+ * fc_fcp_reduce_can_queue() - drop can_queue
* @lp: lport to drop queueing for
*
* If we are getting memory allocation failures, then we may
spin_unlock_irqrestore(lp->host->host_lock, flags);
}
-/*
- * exch mgr calls this routine to process scsi
- * exchanges.
+/**
+ * fc_fcp_recv() - Reveive FCP frames
+ * @seq: The sequence the frame is on
+ * @fp: The FC frame
+ * @arg: The related FCP packet
*
* Return : None
* Context : called from Soft IRQ context
}
/**
- * fc_fcp_complete_locked - complete processing of a fcp packet
+ * fc_fcp_complete_locked() - complete processing of a fcp packet
* @fsp: fcp packet
*
* This function may sleep if a timer is pending. The packet lock must be
}
/**
- * fc_fcp_cleanup_each_cmd - run fn on each active command
+ * fc_fcp_cleanup_each_cmd() - Cleanup active commads
* @lp: logical port
* @id: target id
* @lun: lun
}
/**
- * fc_fcp_pkt_send - send a fcp packet to the lower level.
+ * fc_fcp_pkt_send() - send a fcp packet to the lower level.
* @lp: fc lport
* @fsp: fc packet.
*
static inline int fc_fcp_lport_queue_ready(struct fc_lport *lp)
{
/* lock ? */
- return (lp->state == LPORT_ST_READY) && (lp->link_status & FC_LINK_UP);
+ return (lp->state == LPORT_ST_READY) && lp->link_up && !lp->qfull;
}
/**
EXPORT_SYMBOL(fc_queuecommand);
/**
- * fc_io_compl - Handle responses for completed commands
+ * fc_io_compl() - Handle responses for completed commands
* @fsp: scsi packet
*
* Translates a error to a Linux SCSI error.
sc_cmd->result = DID_ERROR << 16;
break;
case FC_DATA_UNDRUN:
- if (fsp->cdb_status == 0) {
+ if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
/*
* scsi status is good but transport level
- * underrun. for read it should be an error??
+ * underrun.
*/
- sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
+ sc_cmd->result = DID_OK << 16;
} else {
/*
* scsi got underrun, this is an error
}
/**
- * fc_fcp_complete - complete processing of a fcp packet
+ * fc_fcp_complete() - complete processing of a fcp packet
* @fsp: fcp packet
*
* This function may sleep if a fsp timer is pending.
EXPORT_SYMBOL(fc_fcp_complete);
/**
- * fc_eh_abort - Abort a command...from scsi host template
+ * fc_eh_abort() - Abort a command
* @sc_cmd: scsi command to abort
*
+ * From scsi host template.
* send ABTS to the target device and wait for the response
* sc_cmd is the pointer to the command to be aborted.
*/
lp = shost_priv(sc_cmd->device->host);
if (lp->state != LPORT_ST_READY)
return rc;
- else if (!(lp->link_status & FC_LINK_UP))
+ else if (!lp->link_up)
return rc;
spin_lock_irqsave(lp->host->host_lock, flags);
EXPORT_SYMBOL(fc_eh_abort);
/**
- * fc_eh_device_reset: Reset a single LUN
+ * fc_eh_device_reset() Reset a single LUN
* @sc_cmd: scsi command
*
* Set from scsi host template to send tm cmd to the target and wait for the
EXPORT_SYMBOL(fc_eh_device_reset);
/**
- * fc_eh_host_reset - The reset function will reset the ports on the host.
+ * fc_eh_host_reset() - The reset function will reset the ports on the host.
* @sc_cmd: scsi command
*/
int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
EXPORT_SYMBOL(fc_eh_host_reset);
/**
- * fc_slave_alloc - configure queue depth
+ * fc_slave_alloc() - configure queue depth
* @sdev: scsi device
*
* Configures queue depth based on host's cmd_per_len. If not set
}
/**
- * fc_lport_rport_callback - Event handler for rport events
+ * fc_lport_rport_callback() - Event handler for rport events
* @lport: The lport which is receiving the event
* @rport: The rport which the event has occured on
* @event: The event that occured
}
/**
- * fc_lport_state - Return a string which represents the lport's state
+ * fc_lport_state() - Return a string which represents the lport's state
* @lport: The lport whose state is to converted to a string
*/
static const char *fc_lport_state(struct fc_lport *lport)
}
/**
- * fc_lport_ptp_setup - Create an rport for point-to-point mode
+ * fc_lport_ptp_setup() - Create an rport for point-to-point mode
* @lport: The lport to attach the ptp rport to
* @fid: The FID of the ptp rport
* @remote_wwpn: The WWPN of the ptp rport
lport->ptp_rp = NULL;
}
- lport->ptp_rp = fc_rport_rogue_create(&dp);
+ lport->ptp_rp = lport->tt.rport_create(&dp);
lport->tt.rport_login(lport->ptp_rp);
{
struct fc_lport *lp = shost_priv(shost);
- if ((lp->link_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lp->link_up)
fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
else
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
}
/**
- * fc_lport_recv_rlir_req - Handle received Registered Link Incident Report.
+ * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
* @lport: Fibre Channel local port recieving the RLIR
* @sp: current sequence in the RLIR exchange
* @fp: RLIR request frame
}
/**
- * fc_lport_recv_echo_req - Handle received ECHO request
+ * fc_lport_recv_echo_req() - Handle received ECHO request
* @lport: Fibre Channel local port recieving the ECHO
* @sp: current sequence in the ECHO exchange
* @fp: ECHO request frame
}
/**
- * fc_lport_recv_echo_req - Handle received Request Node ID data request
+ * fc_lport_recv_echo_req() - Handle received Request Node ID data request
* @lport: Fibre Channel local port recieving the RNID
* @sp: current sequence in the RNID exchange
* @fp: RNID request frame
}
/**
- * fc_lport_recv_adisc_req - Handle received Address Discovery Request
+ * fc_lport_recv_adisc_req() - Handle received Address Discovery Request
* @lport: Fibre Channel local port recieving the ADISC
* @sp: current sequence in the ADISC exchange
* @fp: ADISC request frame
}
/**
- * fc_lport_recv_logo_req - Handle received fabric LOGO request
+ * fc_lport_recv_logo_req() - Handle received fabric LOGO request
* @lport: Fibre Channel local port recieving the LOGO
* @sp: current sequence in the LOGO exchange
* @fp: LOGO request frame
}
/**
- * fc_fabric_login - Start the lport state machine
+ * fc_fabric_login() - Start the lport state machine
* @lport: The lport that should log into the fabric
*
* Locking Note: This function should not be called
EXPORT_SYMBOL(fc_fabric_login);
/**
- * fc_linkup - Handler for transport linkup events
+ * fc_linkup() - Handler for transport linkup events
* @lport: The lport whose link is up
*/
void fc_linkup(struct fc_lport *lport)
fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
- if ((lport->link_status & FC_LINK_UP) != FC_LINK_UP) {
- lport->link_status |= FC_LINK_UP;
+ if (!lport->link_up) {
+ lport->link_up = 1;
if (lport->state == LPORT_ST_RESET)
fc_lport_enter_flogi(lport);
EXPORT_SYMBOL(fc_linkup);
/**
- * fc_linkdown - Handler for transport linkdown events
+ * fc_linkdown() - Handler for transport linkdown events
* @lport: The lport whose link is down
*/
void fc_linkdown(struct fc_lport *lport)
FC_DEBUG_LPORT("Link is down for port (%6x)\n",
fc_host_port_id(lport->host));
- if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP) {
- lport->link_status &= ~(FC_LINK_UP);
+ if (lport->link_up) {
+ lport->link_up = 0;
fc_lport_enter_reset(lport);
lport->tt.fcp_cleanup(lport);
}
EXPORT_SYMBOL(fc_linkdown);
/**
- * fc_pause - Pause the flow of frames
- * @lport: The lport to be paused
- */
-void fc_pause(struct fc_lport *lport)
-{
- mutex_lock(&lport->lp_mutex);
- lport->link_status |= FC_PAUSE;
- mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_pause);
-
-/**
- * fc_unpause - Unpause the flow of frames
- * @lport: The lport to be unpaused
- */
-void fc_unpause(struct fc_lport *lport)
-{
- mutex_lock(&lport->lp_mutex);
- lport->link_status &= ~(FC_PAUSE);
- mutex_unlock(&lport->lp_mutex);
-}
-EXPORT_SYMBOL(fc_unpause);
-
-/**
- * fc_fabric_logoff - Logout of the fabric
+ * fc_fabric_logoff() - Logout of the fabric
* @lport: fc_lport pointer to logoff the fabric
*
* Return value:
* 0 for success, -1 for failure
- **/
+ */
int fc_fabric_logoff(struct fc_lport *lport)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
+ cancel_delayed_work_sync(&lport->retry_work);
return 0;
}
EXPORT_SYMBOL(fc_fabric_logoff);
/**
- * fc_lport_destroy - unregister a fc_lport
+ * fc_lport_destroy() - unregister a fc_lport
* @lport: fc_lport pointer to unregister
*
* Return value:
* clean-up all the allocated memory
* and free up other system resources.
*
- **/
+ */
int fc_lport_destroy(struct fc_lport *lport)
{
lport->tt.frame_send = fc_frame_drop;
lport->tt.fcp_abort_io(lport);
- lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+ lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
}
EXPORT_SYMBOL(fc_lport_destroy);
/**
- * fc_set_mfs - sets up the mfs for the corresponding fc_lport
+ * fc_set_mfs() - sets up the mfs for the corresponding fc_lport
* @lport: fc_lport pointer to unregister
* @mfs: the new mfs for fc_lport
*
* Set mfs for the given fc_lport to the new mfs.
*
* Return: 0 for success
- *
- **/
+ */
int fc_set_mfs(struct fc_lport *lport, u32 mfs)
{
unsigned int old_mfs;
EXPORT_SYMBOL(fc_set_mfs);
/**
- * fc_lport_disc_callback - Callback for discovery events
+ * fc_lport_disc_callback() - Callback for discovery events
* @lport: FC local port
* @event: The discovery event
*/
}
/**
- * fc_rport_enter_ready - Enter the ready state and start discovery
+ * fc_rport_enter_ready() - Enter the ready state and start discovery
* @lport: Fibre Channel local port that is ready
*
* Locking Note: The lport lock is expected to be held before calling
}
/**
- * fc_lport_recv_flogi_req - Receive a FLOGI request
+ * fc_lport_recv_flogi_req() - Receive a FLOGI request
* @sp_in: The sequence the FLOGI is on
* @rx_fp: The frame the FLOGI is in
* @lport: The lport that recieved the request
}
/**
- * fc_lport_recv_req - The generic lport request handler
+ * fc_lport_recv_req() - The generic lport request handler
* @lport: The lport that received the request
* @sp: The sequence the request is on
* @fp: The frame the request is in
}
/**
- * fc_lport_reset - Reset an lport
+ * fc_lport_reset() - Reset an lport
* @lport: The lport which should be reset
*
* Locking Note: This functions should not be called with the
*/
int fc_lport_reset(struct fc_lport *lport)
{
+ cancel_delayed_work_sync(&lport->retry_work);
mutex_lock(&lport->lp_mutex);
fc_lport_enter_reset(lport);
mutex_unlock(&lport->lp_mutex);
EXPORT_SYMBOL(fc_lport_reset);
/**
- * fc_rport_enter_reset - Reset the local port
+ * fc_rport_enter_reset() - Reset the local port
* @lport: Fibre Channel local port to be reset
*
* Locking Note: The lport lock is expected to be held before calling
lport->tt.disc_stop(lport);
- lport->tt.exch_mgr_reset(lport->emp, 0, 0);
+ lport->tt.exch_mgr_reset(lport, 0, 0);
fc_host_fabric_name(lport->host) = 0;
fc_host_port_id(lport->host) = 0;
- if ((lport->link_status & FC_LINK_UP) == FC_LINK_UP)
+ if (lport->link_up)
fc_lport_enter_flogi(lport);
}
/**
- * fc_lport_error - Handler for any errors
+ * fc_lport_error() - Handler for any errors
* @lport: The fc_lport object
* @fp: The frame pointer
*
}
/**
- * fc_lport_rft_id_resp - Handle response to Register Fibre
- * Channel Types by ID (RPN_ID) request
+ * fc_lport_rft_id_resp() - Handle response to Register Fibre
+ * Channel Types by ID (RPN_ID) request
* @sp: current sequence in RPN_ID exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
FC_DEBUG_LPORT("Received a RFT_ID response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
}
/**
- * fc_lport_rpn_id_resp - Handle response to Register Port
- * Name by ID (RPN_ID) request
+ * fc_lport_rpn_id_resp() - Handle response to Register Port
+ * Name by ID (RPN_ID) request
* @sp: current sequence in RPN_ID exchange
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
FC_DEBUG_LPORT("Received a RPN_ID response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
}
/**
- * fc_lport_scr_resp - Handle response to State Change Register (SCR) request
+ * fc_lport_scr_resp() - Handle response to State Change Register (SCR) request
* @sp: current sequence in SCR exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the registration request
FC_DEBUG_LPORT("Received a SCR response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
}
/**
- * fc_lport_enter_scr - Send a State Change Register (SCR) request
+ * fc_lport_enter_scr() - Send a State Change Register (SCR) request
* @lport: Fibre Channel local port to register for state changes
*
* Locking Note: The lport lock is expected to be held before calling
}
/**
- * fc_lport_enter_rft_id - Register FC4-types with the name server
+ * fc_lport_enter_rft_id() - Register FC4-types with the name server
* @lport: Fibre Channel local port to register
*
* Locking Note: The lport lock is expected to be held before calling
}
/**
- * fc_rport_enter_rft_id - Register port name with the name server
+ * fc_rport_enter_rft_id() - Register port name with the name server
* @lport: Fibre Channel local port to register
*
* Locking Note: The lport lock is expected to be held before calling
};
/**
- * fc_rport_enter_dns - Create a rport to the name server
+ * fc_rport_enter_dns() - Create a rport to the name server
* @lport: Fibre Channel local port requesting a rport for the name server
*
* Locking Note: The lport lock is expected to be held before calling
fc_lport_state_enter(lport, LPORT_ST_DNS);
- rport = fc_rport_rogue_create(&dp);
+ rport = lport->tt.rport_create(&dp);
if (!rport)
goto err;
}
/**
- * fc_lport_timeout - Handler for the retry_work timer.
+ * fc_lport_timeout() - Handler for the retry_work timer.
* @work: The work struct of the fc_lport
*/
static void fc_lport_timeout(struct work_struct *work)
}
/**
- * fc_lport_logo_resp - Handle response to LOGO request
+ * fc_lport_logo_resp() - Handle response to LOGO request
* @sp: current sequence in LOGO exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the LOGO request
FC_DEBUG_LPORT("Received a LOGO response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
}
/**
- * fc_rport_enter_logo - Logout of the fabric
+ * fc_rport_enter_logo() - Logout of the fabric
* @lport: Fibre Channel local port to be logged out
*
* Locking Note: The lport lock is expected to be held before calling
}
/**
- * fc_lport_flogi_resp - Handle response to FLOGI request
+ * fc_lport_flogi_resp() - Handle response to FLOGI request
* @sp: current sequence in FLOGI exchange
* @fp: response frame
* @lp_arg: Fibre Channel lport port instance that sent the FLOGI request
FC_DEBUG_LPORT("Received a FLOGI response\n");
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
}
/**
- * fc_rport_enter_flogi - Send a FLOGI request to the fabric manager
+ * fc_rport_enter_flogi() - Send a FLOGI request to the fabric manager
* @lport: Fibre Channel local port to be logged in to the fabric
*
* Locking Note: The lport lock is expected to be held before calling
struct fc_seq *, struct fc_frame *);
static void fc_rport_timeout(struct work_struct *);
static void fc_rport_error(struct fc_rport *, struct fc_frame *);
+static void fc_rport_error_retry(struct fc_rport *, struct fc_frame *);
static void fc_rport_work(struct work_struct *);
static const char *fc_rport_state_names[] = {
}
/**
- * fc_rport_state - return a string for the state the rport is in
+ * fc_rport_state() - return a string for the state the rport is in
* @rport: The rport whose state we want to get a string for
*/
static const char *fc_rport_state(struct fc_rport *rport)
}
/**
- * fc_set_rport_loss_tmo - Set the remote port loss timeout in seconds.
+ * fc_set_rport_loss_tmo() - Set the remote port loss timeout in seconds.
* @rport: Pointer to Fibre Channel remote port structure
* @timeout: timeout in seconds
*/
EXPORT_SYMBOL(fc_set_rport_loss_tmo);
/**
- * fc_plogi_get_maxframe - Get max payload from the common service parameters
+ * fc_plogi_get_maxframe() - Get max payload from the common service parameters
* @flp: FLOGI payload structure
* @maxval: upper limit, may be less than what is in the service parameters
*/
-static unsigned int
-fc_plogi_get_maxframe(struct fc_els_flogi *flp, unsigned int maxval)
+static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp,
+ unsigned int maxval)
{
unsigned int mfs;
}
/**
- * fc_rport_state_enter - Change the rport's state
+ * fc_rport_state_enter() - Change the rport's state
* @rport: The rport whose state should change
* @new: The new state of the rport
*
static void fc_rport_work(struct work_struct *work)
{
+ u32 port_id;
struct fc_rport_libfc_priv *rdata =
container_of(work, struct fc_rport_libfc_priv, event_work);
enum fc_rport_event event;
rport_ops->event_callback(lport, rport, event);
if (trans_state == FC_PORTSTATE_ROGUE)
put_device(&rport->dev);
- else
+ else {
+ port_id = rport->port_id;
fc_remote_port_delete(rport);
+ lport->tt.exch_mgr_reset(lport, 0, port_id);
+ lport->tt.exch_mgr_reset(lport, port_id, 0);
+ }
} else
mutex_unlock(&rdata->rp_mutex);
}
/**
- * fc_rport_login - Start the remote port login state machine
+ * fc_rport_login() - Start the remote port login state machine
* @rport: Fibre Channel remote port
*
* Locking Note: Called without the rport lock held. This
}
/**
- * fc_rport_logoff - Logoff and remove an rport
+ * fc_rport_logoff() - Logoff and remove an rport
* @rport: Fibre Channel remote port to be removed
*
* Locking Note: Called without the rport lock held. This
}
/**
- * fc_rport_enter_ready - The rport is ready
+ * fc_rport_enter_ready() - The rport is ready
* @rport: Fibre Channel remote port that is ready
*
* Locking Note: The rport lock is expected to be held before calling
}
/**
- * fc_rport_timeout - Handler for the retry_work timer.
+ * fc_rport_timeout() - Handler for the retry_work timer.
* @work: The work struct of the fc_rport_libfc_priv
*
* Locking Note: Called without the rport lock held. This
}
/**
- * fc_rport_error - Handler for any errors
+ * fc_rport_error() - Error handler, called once retries have been exhausted
* @rport: The fc_rport object
* @fp: The frame pointer
*
- * If the error was caused by a resource allocation failure
- * then wait for half a second and retry, otherwise retry
- * immediately.
- *
* Locking Note: The rport lock is expected to be held before
* calling this routine
*/
static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
- unsigned long delay = 0;
FC_DEBUG_RPORT("Error %ld in state %s, retries %d\n",
PTR_ERR(fp), fc_rport_state(rport), rdata->retries);
- if (!fp || PTR_ERR(fp) == -FC_EX_TIMEOUT) {
- /*
- * Memory allocation failure, or the exchange timed out.
- * Retry after delay
- */
- if (rdata->retries < rdata->local_port->max_retry_count) {
- rdata->retries++;
- if (!fp)
- delay = msecs_to_jiffies(500);
- get_device(&rport->dev);
- schedule_delayed_work(&rdata->retry_work, delay);
- } else {
- switch (rdata->rp_state) {
- case RPORT_ST_PLOGI:
- case RPORT_ST_PRLI:
- case RPORT_ST_LOGO:
- rdata->event = RPORT_EV_FAILED;
- queue_work(rport_event_queue,
- &rdata->event_work);
- break;
- case RPORT_ST_RTV:
- fc_rport_enter_ready(rport);
- break;
- case RPORT_ST_NONE:
- case RPORT_ST_READY:
- case RPORT_ST_INIT:
- break;
- }
- }
+ switch (rdata->rp_state) {
+ case RPORT_ST_PLOGI:
+ case RPORT_ST_PRLI:
+ case RPORT_ST_LOGO:
+ rdata->event = RPORT_EV_FAILED;
+ queue_work(rport_event_queue,
+ &rdata->event_work);
+ break;
+ case RPORT_ST_RTV:
+ fc_rport_enter_ready(rport);
+ break;
+ case RPORT_ST_NONE:
+ case RPORT_ST_READY:
+ case RPORT_ST_INIT:
+ break;
}
}
/**
- * fc_rport_plogi_recv_resp - Handle incoming ELS PLOGI response
+ * fc_rport_error_retry() - Error handler when retries are desired
+ * @rport: The fc_rport object
+ * @fp: The frame pointer
+ *
+ * If the error was an exchange timeout retry immediately,
+ * otherwise wait for E_D_TOV.
+ *
+ * Locking Note: The rport lock is expected to be held before
+ * calling this routine
+ */
+static void fc_rport_error_retry(struct fc_rport *rport, struct fc_frame *fp)
+{
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ unsigned long delay = FC_DEF_E_D_TOV;
+
+ /* make sure this isn't an FC_EX_CLOSED error, never retry those */
+ if (PTR_ERR(fp) == -FC_EX_CLOSED)
+ return fc_rport_error(rport, fp);
+
+ if (rdata->retries < rdata->local_port->max_retry_count) {
+ FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
+ PTR_ERR(fp), fc_rport_state(rport));
+ rdata->retries++;
+ /* no additional delay on exchange timeouts */
+ if (PTR_ERR(fp) == -FC_EX_TIMEOUT)
+ delay = 0;
+ get_device(&rport->dev);
+ schedule_delayed_work(&rdata->retry_work, delay);
+ return;
+ }
+
+ return fc_rport_error(rport, fp);
+}
+
+/**
+ * fc_rport_plogi_recv_resp() - Handle incoming ELS PLOGI response
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
else
fc_rport_enter_prli(rport);
} else
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
out:
fc_frame_free(fp);
}
/**
- * fc_rport_enter_plogi - Send Port Login (PLOGI) request to peer
+ * fc_rport_enter_plogi() - Send Port Login (PLOGI) request to peer
* @rport: Fibre Channel remote port to send PLOGI to
*
* Locking Note: The rport lock is expected to be held before calling
rport->maxframe_size = FC_MIN_MAX_PAYLOAD;
fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
rdata->e_d_tov = lport->e_d_tov;
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PLOGI,
fc_rport_plogi_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_prli_resp - Process Login (PRLI) response handler
+ * fc_rport_prli_resp() - Process Login (PRLI) response handler
* @sp: current sequence in the PRLI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
}
/**
- * fc_rport_logo_resp - Logout (LOGO) response handler
+ * fc_rport_logo_resp() - Logout (LOGO) response handler
* @sp: current sequence in the LOGO exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
rport->port_id);
if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
goto err;
}
}
/**
- * fc_rport_enter_prli - Send Process Login (PRLI) request to peer
+ * fc_rport_enter_prli() - Send Process Login (PRLI) request to peer
* @rport: Fibre Channel remote port to send PRLI to
*
* Locking Note: The rport lock is expected to be held before calling
fp = fc_frame_alloc(lport, sizeof(*pp));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_PRLI,
fc_rport_prli_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_els_rtv_resp - Request Timeout Value response handler
+ * fc_rport_els_rtv_resp() - Request Timeout Value response handler
* @sp: current sequence in the RTV exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
goto out;
}
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
}
/**
- * fc_rport_enter_rtv - Send Request Timeout Value (RTV) request to peer
+ * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request to peer
* @rport: Fibre Channel remote port to send RTV to
*
* Locking Note: The rport lock is expected to be held before calling
fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_RTV,
fc_rport_rtv_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_enter_logo - Send Logout (LOGO) request to peer
+ * fc_rport_enter_logo() - Send Logout (LOGO) request to peer
* @rport: Fibre Channel remote port to send LOGO to
*
* Locking Note: The rport lock is expected to be held before calling
fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo));
if (!fp) {
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
return;
}
if (!lport->tt.elsct_send(lport, rport, fp, ELS_LOGO,
fc_rport_logo_resp, rport, lport->e_d_tov))
- fc_rport_error(rport, fp);
+ fc_rport_error_retry(rport, fp);
else
get_device(&rport->dev);
}
/**
- * fc_rport_recv_req - Receive a request from a rport
+ * fc_rport_recv_req() - Receive a request from a rport
* @sp: current sequence in the PLOGI exchange
* @fp: response frame
* @rp_arg: Fibre Channel remote port
}
/**
- * fc_rport_recv_plogi_req - Handle incoming Port Login (PLOGI) request
+ * fc_rport_recv_plogi_req() - Handle incoming Port Login (PLOGI) request
* @rport: Fibre Channel remote port that initiated PLOGI
* @sp: current sequence in the PLOGI exchange
* @fp: PLOGI request frame
}
/**
- * fc_rport_recv_prli_req - Handle incoming Process Login (PRLI) request
+ * fc_rport_recv_prli_req() - Handle incoming Process Login (PRLI) request
* @rport: Fibre Channel remote port that initiated PRLI
* @sp: current sequence in the PRLI exchange
* @fp: PRLI request frame
}
/**
- * fc_rport_recv_prlo_req - Handle incoming Process Logout (PRLO) request
+ * fc_rport_recv_prlo_req() - Handle incoming Process Logout (PRLO) request
* @rport: Fibre Channel remote port that initiated PRLO
* @sp: current sequence in the PRLO exchange
* @fp: PRLO request frame
}
/**
- * fc_rport_recv_logo_req - Handle incoming Logout (LOGO) request
+ * fc_rport_recv_logo_req() - Handle incoming Logout (LOGO) request
* @rport: Fibre Channel remote port that initiated LOGO
* @sp: current sequence in the LOGO exchange
* @fp: LOGO request frame
int fc_rport_init(struct fc_lport *lport)
{
+ if (!lport->tt.rport_create)
+ lport->tt.rport_create = fc_rport_rogue_create;
+
if (!lport->tt.rport_login)
lport->tt.rport_login = fc_rport_login;
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- lport->tt.exch_mgr_reset(lport->emp, 0, rport->port_id);
- lport->tt.exch_mgr_reset(lport->emp, rport->port_id, 0);
+ lport->tt.exch_mgr_reset(lport, 0, rport->port_id);
+ lport->tt.exch_mgr_reset(lport, rport->port_id, 0);
}
EXPORT_SYMBOL(fc_rport_terminate_io);
if (ha->optrom_state != QLA_SWAITING)
break;
- if (start & 0xfff) {
- qla_printk(KERN_WARNING, ha,
- "Invalid start region 0x%x/0x%x.\n", start, size);
- return -EINVAL;
- }
-
ha->optrom_region_start = start;
ha->optrom_region_size = start + size > ha->optrom_size ?
ha->optrom_size - start : size;
else if (start == (ha->flt_region_boot * 4) ||
start == (ha->flt_region_fw * 4))
valid = 1;
- else if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) &&
- start == (ha->flt_region_vpd_nvram * 4))
+ else if (IS_QLA25XX(ha) || IS_QLA81XX(ha))
valid = 1;
if (!valid) {
qla_printk(KERN_WARNING, ha,
DEBUG(printk("scsi(%ld): Issue init firmware.\n", vha->host_no));
- if (ha->flags.npiv_supported)
+ if (ha->flags.npiv_supported) {
+ if (ha->operating_mode == LOOP)
+ ha->max_npiv_vports = MIN_MULTI_ID_FABRIC - 1;
mid_init_cb->count = cpu_to_le16(ha->max_npiv_vports);
+ }
+
mid_init_cb->options = __constant_cpu_to_le16(BIT_1);
port_id_t wrap, nxt_d_id;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
+ struct scsi_qla_host *tvp;
rval = QLA_SUCCESS;
/* Bypass virtual ports of the same host. */
found = 0;
if (ha->num_vhosts) {
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (new_fcport->d_id.b24 == vp->d_id.b24) {
found = 1;
break;
uint16_t first_loop_id;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
+ struct scsi_qla_host *tvp;
rval = QLA_SUCCESS;
/* Check for loop ID being already in use. */
found = 0;
fcport = NULL;
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
list_for_each_entry(fcport, &vp->vp_fcports, list) {
if (fcport->loop_id == dev->loop_id &&
fcport != dev) {
uint8_t status = 0;
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *vp;
+ struct scsi_qla_host *tvp;
struct req_que *req = ha->req_q_map[0];
if (vha->flags.online) {
if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
atomic_set(&vha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(vha, 0);
- list_for_each_entry(vp, &ha->vp_list, list)
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
qla2x00_mark_all_devices_lost(vp, 0);
} else {
if (!atomic_read(&vha->loop_down_timer))
DEBUG(printk(KERN_INFO
"qla2x00_abort_isp(%ld): succeeded.\n",
vha->host_no));
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (vp->vp_idx)
qla2x00_vp_abort_isp(vp);
}
static int
qla2x00_restart_isp(scsi_qla_host_t *vha)
{
- uint8_t status = 0;
+ int status = 0;
uint32_t wait_time;
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *vp;
+ scsi_qla_host_t *tvp;
if (rptid_entry->entry_status != 0)
return;
if (MSB(stat) == 1)
return;
- list_for_each_entry(vp, &ha->vp_list, list)
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
if (vp_idx == vp->vp_idx)
break;
if (!vp)
qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
{
scsi_qla_host_t *vha;
+ struct scsi_qla_host *tvha;
/* Locate matching device in database. */
- list_for_each_entry(vha, &ha->vp_list, list) {
+ list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
if (!memcmp(port_name, vha->port_name, WWN_SIZE))
return vha;
}
void
qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
{
- scsi_qla_host_t *vha;
+ scsi_qla_host_t *vha, *tvha;
struct qla_hw_data *ha = rsp->hw;
int i = 0;
- list_for_each_entry(vha, &ha->vp_list, list) {
+ list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
if (vha->vp_idx) {
switch (mb[0]) {
case MBA_LIP_OCCURRED:
int ret;
struct qla_hw_data *ha = vha->hw;
scsi_qla_host_t *vp;
+ struct scsi_qla_host *tvp;
if (vha->vp_idx)
return;
clear_bit(VP_DPC_NEEDED, &vha->dpc_flags);
- list_for_each_entry(vp, &ha->vp_list, list) {
+ list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
if (vp->vp_idx)
ret = qla2x00_do_dpc_vp(vp);
}
{
char name[16];
- ha->init_cb_size = sizeof(init_cb_t);
- if (IS_QLA2XXX_MIDTYPE(ha))
- ha->init_cb_size = sizeof(struct mid_init_cb_24xx);
-
ha->init_cb = dma_alloc_coherent(&ha->pdev->dev, ha->init_cb_size,
&ha->init_cb_dma, GFP_KERNEL);
if (!ha->init_cb)
void qla2x00_relogin(struct scsi_qla_host *vha)
{
fc_port_t *fcport;
- uint8_t status;
+ int status;
uint16_t next_loopid = 0;
struct qla_hw_data *ha = vha->hw;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.00-k3"
+#define QLA2XXX_VERSION "8.03.00-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
/*
* The device does not want the automatic start to be issued.
*/
- if (sdkp->device->no_start_on_add) {
+ if (sdkp->device->no_start_on_add)
break;
- }
-
- /*
- * If manual intervention is required, or this is an
- * absent USB storage device, a spinup is meaningless.
- */
- if (sense_valid &&
- sshdr.sense_key == NOT_READY &&
- sshdr.asc == 4 && sshdr.ascq == 3) {
- break; /* manual intervention required */
- /*
- * Issue command to spin up drive when not ready
- */
- } else if (sense_valid && sshdr.sense_key == NOT_READY) {
+ if (sense_valid && sshdr.sense_key == NOT_READY) {
+ if (sshdr.asc == 4 && sshdr.ascq == 3)
+ break; /* manual intervention required */
+ if (sshdr.asc == 4 && sshdr.ascq == 0xb)
+ break; /* standby */
+ if (sshdr.asc == 4 && sshdr.ascq == 0xc)
+ break; /* unavailable */
+ /*
+ * Issue command to spin up drive when not ready
+ */
if (!spintime) {
sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
cmd[0] = START_STOP;
goto fail;
if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
- dev_printk(KERN_ERR, dev, "irq problem with %d, detaching\n ",
+ dev_printk(KERN_ERR, &dev->dev, "irq problem with %d, detaching\n ",
dev->irq);
goto fail;
}
* bio_integrity_clone - Callback for cloning bios with integrity metadata
* @bio: New bio
* @bio_src: Original bio
+ * @gfp_mask: Memory allocation mask
* @bs: bio_set to allocate bip from
*
* Description: Called to allocate a bip when cloning a bio
*/
int bio_integrity_clone(struct bio *bio, struct bio *bio_src,
- struct bio_set *bs)
+ gfp_t gfp_mask, struct bio_set *bs)
{
struct bio_integrity_payload *bip_src = bio_src->bi_integrity;
struct bio_integrity_payload *bip;
BUG_ON(bip_src == NULL);
- bip = bio_integrity_alloc_bioset(bio, GFP_NOIO, bip_src->bip_vcnt, bs);
+ bip = bio_integrity_alloc_bioset(bio, gfp_mask, bip_src->bip_vcnt, bs);
if (bip == NULL)
return -EIO;
if (bio_integrity(bio)) {
int ret;
- ret = bio_integrity_clone(b, bio, fs_bio_set);
+ ret = bio_integrity_clone(b, bio, gfp_mask, fs_bio_set);
- if (ret < 0)
+ if (ret < 0) {
+ bio_put(b);
return NULL;
+ }
}
return b;
list_for_each_entry(global_auth_tok,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
+ if (global_auth_tok->flags & ECRYPTFS_AUTH_TOK_FNEK)
+ continue;
rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
if (rc) {
printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
*/
struct ecryptfs_global_auth_tok {
#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
+#define ECRYPTFS_AUTH_TOK_FNEK 0x00000002
u32 flags;
struct list_head mount_crypt_stat_list;
struct key *global_auth_tok_key;
int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig);
int
ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
- char *sig);
+ char *sig, u32 global_auth_tok_flags);
int ecryptfs_get_global_auth_tok_for_sig(
struct ecryptfs_global_auth_tok **global_auth_tok,
struct ecryptfs_mount_crypt_stat *mount_crypt_stat, char *sig);
int
ecryptfs_add_global_auth_tok(struct ecryptfs_mount_crypt_stat *mount_crypt_stat,
- char *sig)
+ char *sig, u32 global_auth_tok_flags)
{
struct ecryptfs_global_auth_tok *new_auth_tok;
int rc = 0;
goto out;
}
memcpy(new_auth_tok->sig, sig, ECRYPTFS_SIG_SIZE_HEX);
+ new_auth_tok->flags = global_auth_tok_flags;
new_auth_tok->sig[ECRYPTFS_SIG_SIZE_HEX] = '\0';
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
list_add(&new_auth_tok->mount_crypt_stat_list,
case ecryptfs_opt_ecryptfs_sig:
sig_src = args[0].from;
rc = ecryptfs_add_global_auth_tok(mount_crypt_stat,
- sig_src);
+ sig_src, 0);
if (rc) {
printk(KERN_ERR "Error attempting to register "
"global sig; rc = [%d]\n", rc);
ECRYPTFS_SIG_SIZE_HEX] = '\0';
rc = ecryptfs_add_global_auth_tok(
mount_crypt_stat,
- mount_crypt_stat->global_default_fnek_sig);
+ mount_crypt_stat->global_default_fnek_sig,
+ ECRYPTFS_AUTH_TOK_FNEK);
if (rc) {
printk(KERN_ERR "Error attempting to register "
"global fnek sig [%s]; rc = [%d]\n",
return 0;
}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+static const struct in6_addr *nlmclnt_map_v4addr(const struct sockaddr *sap,
+ struct in6_addr *addr_mapped)
+{
+ const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
+
+ switch (sap->sa_family) {
+ case AF_INET6:
+ return &((const struct sockaddr_in6 *)sap)->sin6_addr;
+ case AF_INET:
+ ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, addr_mapped);
+ return addr_mapped;
+ }
+
+ return NULL;
+}
+
+/*
+ * If lockd is using a PF_INET6 listener, all incoming requests appear
+ * to come from AF_INET6 remotes. The address of AF_INET remotes are
+ * mapped to AF_INET6 automatically by the network layer. In case the
+ * user passed an AF_INET server address at mount time, ensure both
+ * addresses are AF_INET6 before comparing them.
+ */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+ const struct sockaddr *sap)
+{
+ const struct in6_addr *addr1;
+ const struct in6_addr *addr2;
+ struct in6_addr addr1_mapped;
+ struct in6_addr addr2_mapped;
+
+ addr1 = nlmclnt_map_v4addr(nlm_addr(host), &addr1_mapped);
+ if (likely(addr1 != NULL)) {
+ addr2 = nlmclnt_map_v4addr(sap, &addr2_mapped);
+ if (likely(addr2 != NULL))
+ return ipv6_addr_equal(addr1, addr2);
+ }
+
+ return 0;
+}
+#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static int nlmclnt_cmp_addr(const struct nlm_host *host,
+ const struct sockaddr *sap)
+{
+ return nlm_cmp_addr(nlm_addr(host), sap);
+}
+#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+
/*
* The server lockd has called us back to tell us the lock was granted
*/
*/
if (fl_blocked->fl_u.nfs_fl.owner->pid != lock->svid)
continue;
- if (!nlm_cmp_addr(nlm_addr(block->b_host), addr))
+ if (!nlmclnt_cmp_addr(block->b_host, addr))
continue;
if (nfs_compare_fh(NFS_FH(fl_blocked->fl_file->f_path.dentry->d_inode) ,fh) != 0)
continue;
}
return 0;
}
+
+/*
+ * Test if two ip6 socket addresses refer to the same socket by
+ * comparing relevant fields. The padding bytes specifically, are not
+ * compared. sin6_flowinfo is not compared because it only affects QoS
+ * and sin6_scope_id is only compared if the address is "link local"
+ * because "link local" addresses need only be unique to a specific
+ * link. Conversely, ordinary unicast addresses might have different
+ * sin6_scope_id.
+ *
+ * The caller should ensure both socket addresses are AF_INET6.
+ */
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ const struct sockaddr_in6 *saddr1 = (const struct sockaddr_in6 *)sa1;
+ const struct sockaddr_in6 *saddr2 = (const struct sockaddr_in6 *)sa2;
+
+ if (!ipv6_addr_equal(&saddr1->sin6_addr,
+ &saddr1->sin6_addr))
+ return 0;
+ if (ipv6_addr_scope(&saddr1->sin6_addr) == IPV6_ADDR_SCOPE_LINKLOCAL &&
+ saddr1->sin6_scope_id != saddr2->sin6_scope_id)
+ return 0;
+ return saddr1->sin6_port == saddr2->sin6_port;
+}
#else
static int nfs_sockaddr_match_ipaddr4(const struct sockaddr_in *sa1,
const struct sockaddr_in *sa2)
return nfs_sockaddr_match_ipaddr4((const struct sockaddr_in *)sa1,
(const struct sockaddr_in *)sa2);
}
+
+static int nfs_sockaddr_cmp_ip6(const struct sockaddr * sa1,
+ const struct sockaddr * sa2)
+{
+ return 0;
+}
#endif
+/*
+ * Test if two ip4 socket addresses refer to the same socket, by
+ * comparing relevant fields. The padding bytes specifically, are
+ * not compared.
+ *
+ * The caller should ensure both socket addresses are AF_INET.
+ */
+static int nfs_sockaddr_cmp_ip4(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ const struct sockaddr_in *saddr1 = (const struct sockaddr_in *)sa1;
+ const struct sockaddr_in *saddr2 = (const struct sockaddr_in *)sa2;
+
+ if (saddr1->sin_addr.s_addr != saddr2->sin_addr.s_addr)
+ return 0;
+ return saddr1->sin_port == saddr2->sin_port;
+}
+
+/*
+ * Test if two socket addresses represent the same actual socket,
+ * by comparing (only) relevant fields.
+ */
+static int nfs_sockaddr_cmp(const struct sockaddr *sa1,
+ const struct sockaddr *sa2)
+{
+ if (sa1->sa_family != sa2->sa_family)
+ return 0;
+
+ switch (sa1->sa_family) {
+ case AF_INET:
+ return nfs_sockaddr_cmp_ip4(sa1, sa2);
+ case AF_INET6:
+ return nfs_sockaddr_cmp_ip6(sa1, sa2);
+ }
+ return 0;
+}
+
/*
* Find a client by IP address and protocol version
* - returns NULL if no such client
static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *data)
{
struct nfs_client *clp;
+ const struct sockaddr *sap = data->addr;
list_for_each_entry(clp, &nfs_client_list, cl_share_link) {
+ const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
/* Don't match clients that failed to initialise properly */
if (clp->cl_cons_state < 0)
continue;
continue;
/* Match the full socket address */
- if (memcmp(&clp->cl_addr, data->addr, sizeof(clp->cl_addr)) != 0)
+ if (!nfs_sockaddr_cmp(sap, clap))
continue;
atomic_inc(&clp->cl_count);
cache.cred = cred;
cache.jiffies = jiffies;
status = NFS_PROTO(inode)->access(inode, &cache);
- if (status != 0)
+ if (status != 0) {
+ if (status == -ESTALE) {
+ nfs_zap_caches(inode);
+ if (!S_ISDIR(inode->i_mode))
+ set_bit(NFS_INO_STALE, &NFS_I(inode)->flags);
+ }
return status;
+ }
nfs_access_add_cache(inode, &cache);
out:
if ((mask & ~cache.mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
{
struct nfs_server *server = NFS_SERVER(inode);
struct nfs_fattr fattr;
- struct page *pages[NFSACL_MAXPAGES] = { };
+ struct page *pages[NFSACL_MAXPAGES];
struct nfs3_setaclargs args = {
.inode = inode,
.mask = NFS_ACL,
.rpc_argp = &args,
.rpc_resp = &fattr,
};
- int status, count;
+ int status;
status = -EOPNOTSUPP;
if (!nfs_server_capable(inode, NFS_CAP_ACLS))
if (S_ISDIR(inode->i_mode)) {
args.mask |= NFS_DFACL;
args.acl_default = dfacl;
+ args.len = nfsacl_size(acl, dfacl);
+ } else
+ args.len = nfsacl_size(acl, NULL);
+
+ if (args.len > NFS_ACL_INLINE_BUFSIZE) {
+ unsigned int npages = 1 + ((args.len - 1) >> PAGE_SHIFT);
+
+ status = -ENOMEM;
+ do {
+ args.pages[args.npages] = alloc_page(GFP_KERNEL);
+ if (args.pages[args.npages] == NULL)
+ goto out_freepages;
+ args.npages++;
+ } while (args.npages < npages);
}
dprintk("NFS call setacl\n");
nfs_zap_acl_cache(inode);
dprintk("NFS reply setacl: %d\n", status);
- /* pages may have been allocated at the xdr layer. */
- for (count = 0; count < NFSACL_MAXPAGES && args.pages[count]; count++)
- __free_page(args.pages[count]);
-
switch (status) {
case 0:
status = nfs_refresh_inode(inode, &fattr);
case -ENOTSUPP:
status = -EOPNOTSUPP;
}
+out_freepages:
+ while (args.npages != 0) {
+ args.npages--;
+ __free_page(args.pages[args.npages]);
+ }
out:
return status;
}
#define NFS3_commitres_sz (1+NFS3_wcc_data_sz+2)
#define ACL3_getaclargs_sz (NFS3_fh_sz+1)
-#define ACL3_setaclargs_sz (NFS3_fh_sz+1+2*(2+5*3))
-#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+2*(2+5*3))
+#define ACL3_setaclargs_sz (NFS3_fh_sz+1+ \
+ XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
+#define ACL3_getaclres_sz (1+NFS3_post_op_attr_sz+1+ \
+ XDR_QUADLEN(NFS_ACL_INLINE_BUFSIZE))
#define ACL3_setaclres_sz (1+NFS3_post_op_attr_sz)
/*
struct nfs3_setaclargs *args)
{
struct xdr_buf *buf = &req->rq_snd_buf;
- unsigned int base, len_in_head, len = nfsacl_size(
- (args->mask & NFS_ACL) ? args->acl_access : NULL,
- (args->mask & NFS_DFACL) ? args->acl_default : NULL);
- int count, err;
+ unsigned int base;
+ int err;
p = xdr_encode_fhandle(p, NFS_FH(args->inode));
*p++ = htonl(args->mask);
- base = (char *)p - (char *)buf->head->iov_base;
- /* put as much of the acls into head as possible. */
- len_in_head = min_t(unsigned int, buf->head->iov_len - base, len);
- len -= len_in_head;
- req->rq_slen = xdr_adjust_iovec(req->rq_svec, p + (len_in_head >> 2));
-
- for (count = 0; (count << PAGE_SHIFT) < len; count++) {
- args->pages[count] = alloc_page(GFP_KERNEL);
- if (!args->pages[count]) {
- while (count)
- __free_page(args->pages[--count]);
- return -ENOMEM;
- }
- }
- xdr_encode_pages(buf, args->pages, 0, len);
+ req->rq_slen = xdr_adjust_iovec(req->rq_svec, p);
+ base = req->rq_slen;
+
+ if (args->npages != 0)
+ xdr_encode_pages(buf, args->pages, 0, args->len);
+ else
+ req->rq_slen += args->len;
err = nfsacl_encode(buf, base, args->inode,
(args->mask & NFS_ACL) ?
#define NFSDBG_FACILITY NFSDBG_VFS
/*
- * Check if fs_root is valid
+ * Convert the NFSv4 pathname components into a standard posix path.
+ *
+ * Note that the resulting string will be placed at the end of the buffer
*/
static inline char *nfs4_pathname_string(const struct nfs4_pathname *pathname,
char *buffer, ssize_t buflen)
{
struct vfsmount *mnt = ERR_PTR(-ENOENT);
char *mnt_path;
- int page2len;
+ unsigned int maxbuflen;
unsigned int s;
mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
if (IS_ERR(mnt_path))
return mnt;
mountdata->mnt_path = mnt_path;
- page2 += strlen(mnt_path) + 1;
- page2len = PAGE_SIZE - strlen(mnt_path) - 1;
+ maxbuflen = mnt_path - 1 - page2;
for (s = 0; s < location->nservers; s++) {
const struct nfs4_string *buf = &location->servers[s];
struct sockaddr_storage addr;
- if (buf->len <= 0 || buf->len >= PAGE_SIZE)
+ if (buf->len <= 0 || buf->len >= maxbuflen)
continue;
mountdata->addr = (struct sockaddr *)&addr;
continue;
nfs_set_port(mountdata->addr, NFS_PORT);
- strncpy(page2, buf->data, page2len);
- page2[page2len] = '\0';
+ memcpy(page2, buf->data, buf->len);
+ page2[buf->len] = '\0';
mountdata->hostname = page2;
snprintf(page, PAGE_SIZE, "%s:%s",
BUG_ON(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL);
mlog_bug_on_msg(!ocfs2_sparse_alloc(osb) &&
- (OCFS2_I(inode)->ip_clusters != rec->e_cpos),
+ (OCFS2_I(inode)->ip_clusters !=
+ le32_to_cpu(rec->e_cpos)),
"Device %s, asking for sparse allocation: inode %llu, "
"cpos %u, clusters %u\n",
osb->dev_str,
size = i_size_read(inode);
if (size > PAGE_CACHE_SIZE ||
- size > ocfs2_max_inline_data(inode->i_sb)) {
+ size > ocfs2_max_inline_data_with_xattr(inode->i_sb, di)) {
ocfs2_error(inode->i_sb,
"Inode %llu has with inline data has bad size: %Lu",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
int ret, written = 0;
loff_t end = pos + len;
struct ocfs2_inode_info *oi = OCFS2_I(inode);
+ struct ocfs2_dinode *di = NULL;
mlog(0, "Inode %llu, write of %u bytes at off %llu. features: 0x%x\n",
(unsigned long long)oi->ip_blkno, len, (unsigned long long)pos,
/*
* Check whether the write can fit.
*/
- if (mmap_page || end > ocfs2_max_inline_data(inode->i_sb))
+ di = (struct ocfs2_dinode *)wc->w_di_bh->b_data;
+ if (mmap_page ||
+ end > ocfs2_max_inline_data_with_xattr(inode->i_sb, di))
return 0;
do_inline_write:
fe->i_dyn_features = cpu_to_le16(feat | OCFS2_INLINE_DATA_FL);
- fe->id2.i_data.id_count = cpu_to_le16(ocfs2_max_inline_data(osb->sb));
+ fe->id2.i_data.id_count = cpu_to_le16(
+ ocfs2_max_inline_data_with_xattr(osb->sb, fe));
} else {
fel = &fe->id2.i_list;
fel->l_tree_depth = 0;
offsetof(struct ocfs2_dinode, id2.i_symlink);
}
-static inline int ocfs2_max_inline_data(struct super_block *sb)
-{
- return sb->s_blocksize -
- offsetof(struct ocfs2_dinode, id2.i_data.id_data);
-}
-
static inline int ocfs2_max_inline_data_with_xattr(struct super_block *sb,
struct ocfs2_dinode *di)
{
* when blocksize = 512, may reserve one more cluser for
* xattr bucket, otherwise reserve one metadata block
* for them is ok.
+ * If this is a new directory with inline data,
+ * we choose to reserve the entire inline area for
+ * directory contents and force an external xattr block.
*/
if (dir->i_sb->s_blocksize == OCFS2_MIN_BLOCKSIZE ||
+ (S_ISDIR(mode) && ocfs2_supports_inline_data(osb)) ||
(s_size + a_size) > OCFS2_XATTR_FREE_IN_IBODY) {
ret = ocfs2_reserve_new_metadata_blocks(osb, 1, xattr_ac);
if (ret) {
char *val,
int value_len)
{
- int offset;
+ int ret, offset, block_off;
struct ocfs2_xattr_value_root *xv;
struct ocfs2_xattr_entry *xe = xs->here;
+ struct ocfs2_xattr_header *xh = bucket_xh(xs->bucket);
+ void *base;
BUG_ON(!xs->base || !xe || ocfs2_xattr_is_local(xe));
- offset = le16_to_cpu(xe->xe_name_offset) +
- OCFS2_XATTR_SIZE(xe->xe_name_len);
+ ret = ocfs2_xattr_bucket_get_name_value(inode, xh,
+ xe - xh->xh_entries,
+ &block_off,
+ &offset);
+ if (ret) {
+ mlog_errno(ret);
+ goto out;
+ }
- xv = (struct ocfs2_xattr_value_root *)(xs->base + offset);
+ base = bucket_block(xs->bucket, block_off);
+ xv = (struct ocfs2_xattr_value_root *)(base + offset +
+ OCFS2_XATTR_SIZE(xe->xe_name_len));
- return __ocfs2_xattr_set_value_outside(inode, handle,
- xv, val, value_len);
+ ret = __ocfs2_xattr_set_value_outside(inode, handle,
+ xv, val, value_len);
+ if (ret)
+ mlog_errno(ret);
+out:
+ return ret;
}
static int ocfs2_rm_xattr_cluster(struct inode *inode,
if (!pagevec_add(&lru_pvec, page))
__pagevec_lru_add_file(&lru_pvec);
+ /* prevent the page from being discarded on memory pressure */
+ SetPageDirty(page);
+
unlock_page(page);
}
return -EFBIG;
add_error:
+ pagevec_lru_add_file(&lru_pvec);
page_cache_release(pages + loop);
for (loop++; loop < npages; loop++)
__free_page(pages + loop);
extern void bio_integrity_advance(struct bio *, unsigned int);
extern void bio_integrity_trim(struct bio *, unsigned int, unsigned int);
extern void bio_integrity_split(struct bio *, struct bio_pair *, int);
-extern int bio_integrity_clone(struct bio *, struct bio *, struct bio_set *);
+extern int bio_integrity_clone(struct bio *, struct bio *, gfp_t, struct bio_set *);
extern int bioset_integrity_create(struct bio_set *, int);
extern void bioset_integrity_free(struct bio_set *);
extern void bio_integrity_init_slab(void);
#define bioset_integrity_create(a, b) (0)
#define bio_integrity_prep(a) (0)
#define bio_integrity_enabled(a) (0)
-#define bio_integrity_clone(a, b, c) (0)
+#define bio_integrity_clone(a, b, c,d ) (0)
#define bioset_integrity_free(a) do { } while (0)
#define bio_integrity_free(a, b) do { } while (0)
#define bio_integrity_endio(a, b) do { } while (0)
#define __deprecated __attribute__((deprecated))
#define __packed __attribute__((packed))
#define __weak __attribute__((weak))
-#define __naked __attribute__((naked))
+
+/*
+ * it doesn't make sense on ARM (currently the only user of __naked) to trace
+ * naked functions because then mcount is called without stack and frame pointer
+ * being set up and there is no chance to restore the lr register to the value
+ * before mcount was called.
+ */
+#define __naked __attribute__((naked)) notrace
+
#define __noreturn __attribute__((noreturn))
/*
};
struct dyn_ftrace {
- struct list_head list;
unsigned long ip; /* address of mcount call-site */
unsigned long flags;
struct dyn_arch_ftrace arch;
struct scatterlist *sg_table;
int sg_max_nents; /* Maximum number of entries in it */
int sg_nents; /* Current number of entries in it */
+ int orig_sg_nents;
int sg_dma_direction; /* dma transfer direction */
/* data phase of the active command (currently only valid for PIO/DMA) */
NR_SOFTIRQS
};
+/* map softirq index to softirq name. update 'softirq_to_name' in
+ * kernel/softirq.c when adding a new softirq.
+ */
+extern char *softirq_to_name[NR_SOFTIRQS];
+
/* softirq mask and active fields moved to irq_cpustat_t in
* asm/hardirq.h to get better cache usage. KAO
*/
#define trace_printk(fmt, args...) \
do { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))); \
- \
- if (!trace_printk_fmt) \
- trace_printk_fmt = fmt; \
- \
__trace_printk_check_format(fmt, ##args); \
- __trace_printk(_THIS_IP_, trace_printk_fmt, ##args); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(_THIS_IP_, fmt, ##args); \
} while (0)
+extern int
+__trace_bprintk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
extern int
__trace_printk(unsigned long ip, const char *fmt, ...)
__attribute__ ((format (printf, 2, 3)));
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement.
+ */
#define ftrace_vprintk(fmt, vargs) \
do { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))); \
- \
- if (!trace_printk_fmt) \
- trace_printk_fmt = fmt; \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
\
- __ftrace_vprintk(_THIS_IP_, trace_printk_fmt, vargs); \
+ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \
+ } else \
+ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \
} while (0)
+extern int
+__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
+
extern int
__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
return sin1->sin_addr.s_addr == sin2->sin_addr.s_addr;
}
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
const struct sockaddr *sap2)
{
const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2;
return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr);
}
+#else /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
+static inline int __nlm_cmp_addr6(const struct sockaddr *sap1,
+ const struct sockaddr *sap2)
+{
+ return 0;
+}
+#endif /* !(CONFIG_IPV6 || CONFIG_IPV6_MODULE) */
/*
* Compare two host addresses
int mask;
struct posix_acl * acl_access;
struct posix_acl * acl_default;
+ size_t len;
+ unsigned int npages;
struct page ** pages;
};
#define NFSACL_MAXPAGES ((2*(8+12*NFS_ACL_MAX_ENTRIES) + PAGE_SIZE-1) \
>> PAGE_SHIFT)
+#define NFS_ACL_MAX_ENTRIES_INLINE (5)
+#define NFS_ACL_INLINE_BUFSIZE ((2*(2+3*NFS_ACL_MAX_ENTRIES_INLINE)) << 2)
+
static inline unsigned int
nfsacl_size(struct posix_acl *acl_access, struct posix_acl *acl_default)
{
#define ETH_P_FCOE 0x8906 /* FCOE ether type */
#endif
-#ifndef ETH_P_8021Q
-#define ETH_P_8021Q 0x8100
-#endif
-
/*
* FC_FCOE_OUI hasn't been standardized yet. XXX TBD.
*/
FC_RJT_VENDOR = 0xff, /* vendor specific reject */
};
+/* default timeout values */
+
+#define FC_DEF_E_D_TOV 2000UL
+#define FC_DEF_R_A_TOV 10000UL
+
#endif /* _FC_FS_H_ */
/*
* FC HBA status
*/
-#define FC_PAUSE (1 << 1)
-#define FC_LINK_UP (1 << 0)
-
enum fc_lport_state {
LPORT_ST_NONE = 0,
LPORT_ST_FLOGI,
struct libfc_function_template {
- /**
- * Mandatory Fields
- *
- * These handlers must be implemented by the LLD.
- */
-
/*
* Interface to send a FC frame
- */
- int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
-
- /**
- * Optional Fields
*
- * The LLD may choose to implement any of the following handlers.
- * If LLD doesn't specify hander and leaves its pointer NULL then
- * the default libfc function will be used for that handler.
- */
-
- /**
- * ELS/CT interfaces
+ * STATUS: REQUIRED
*/
+ int (*frame_send)(struct fc_lport *lp, struct fc_frame *fp);
/*
- * elsct_send - sends ELS/CT frame
+ * Interface to send ELS/CT frames
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*elsct_send)(struct fc_lport *lport,
struct fc_rport *rport,
struct fc_frame *fp,
void *arg),
void *arg, u32 timer_msec);
- /**
- * Exhance Manager interfaces
- */
/*
* Send the FC frame payload using a new exchange and sequence.
* timer_msec argument is specified. The timer is canceled when
* it fires or when the exchange is done. The exchange timeout handler
* is registered by EM layer.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*exch_seq_send)(struct fc_lport *lp,
struct fc_frame *fp,
void *arg, unsigned int timer_msec);
/*
- * send a frame using existing sequence and exchange.
+ * Send a frame using an existing sequence and exchange.
+ *
+ * STATUS: OPTIONAL
*/
int (*seq_send)(struct fc_lport *lp, struct fc_seq *sp,
struct fc_frame *fp);
/*
- * Send ELS response using mainly infomation
- * in exchange and sequence in EM layer.
+ * Send an ELS response using infomation from a previous
+ * exchange and sequence.
+ *
+ * STATUS: OPTIONAL
*/
void (*seq_els_rsp_send)(struct fc_seq *sp, enum fc_els_cmd els_cmd,
struct fc_seq_els_data *els_data);
* A timer_msec can be specified for abort timeout, if non-zero
* timer_msec value is specified then exchange resp handler
* will be called with timeout error if no response to abort.
+ *
+ * STATUS: OPTIONAL
*/
int (*seq_exch_abort)(const struct fc_seq *req_sp,
unsigned int timer_msec);
/*
* Indicate that an exchange/sequence tuple is complete and the memory
* allocated for the related objects may be freed.
+ *
+ * STATUS: OPTIONAL
*/
void (*exch_done)(struct fc_seq *sp);
* Assigns a EM and a free XID for an new exchange and then
* allocates a new exchange and sequence pair.
* The fp can be used to determine free XID.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_exch *(*exch_get)(struct fc_lport *lp, struct fc_frame *fp);
* Release previously assigned XID by exch_get API.
* The LLD may implement this if XID is assigned by LLD
* in exch_get().
+ *
+ * STATUS: OPTIONAL
*/
void (*exch_put)(struct fc_lport *lp, struct fc_exch_mgr *mp,
u16 ex_id);
/*
* Start a new sequence on the same exchange/sequence tuple.
+ *
+ * STATUS: OPTIONAL
*/
struct fc_seq *(*seq_start_next)(struct fc_seq *sp);
* Reset an exchange manager, completing all sequences and exchanges.
* If s_id is non-zero, reset only exchanges originating from that FID.
* If d_id is non-zero, reset only exchanges sending to that FID.
+ *
+ * STATUS: OPTIONAL
*/
- void (*exch_mgr_reset)(struct fc_exch_mgr *,
+ void (*exch_mgr_reset)(struct fc_lport *,
u32 s_id, u32 d_id);
- void (*rport_flush_queue)(void);
- /**
- * Local Port interfaces
+ /*
+ * Flush the rport work queue. Generally used before shutdown.
+ *
+ * STATUS: OPTIONAL
*/
+ void (*rport_flush_queue)(void);
/*
- * Receive a frame to a local port.
+ * Receive a frame for a local port.
+ *
+ * STATUS: OPTIONAL
*/
void (*lport_recv)(struct fc_lport *lp, struct fc_seq *sp,
struct fc_frame *fp);
+ /*
+ * Reset the local port.
+ *
+ * STATUS: OPTIONAL
+ */
int (*lport_reset)(struct fc_lport *);
- /**
- * Remote Port interfaces
+ /*
+ * Create a remote port
*/
+ struct fc_rport *(*rport_create)(struct fc_disc_port *);
/*
* Initiates the RP state machine. It is called from the LP module.
* - PLOGI
* - PRLI
* - RTV
+ *
+ * STATUS: OPTIONAL
*/
int (*rport_login)(struct fc_rport *rport);
/*
* Logoff, and remove the rport from the transport if
* it had been added. This will send a LOGO to the target.
+ *
+ * STATUS: OPTIONAL
*/
int (*rport_logoff)(struct fc_rport *rport);
/*
* Recieve a request from a remote port.
+ *
+ * STATUS: OPTIONAL
*/
void (*rport_recv_req)(struct fc_seq *, struct fc_frame *,
struct fc_rport *);
- struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
-
- /**
- * FCP interfaces
+ /*
+ * lookup an rport by it's port ID.
+ *
+ * STATUS: OPTIONAL
*/
+ struct fc_rport *(*rport_lookup)(const struct fc_lport *, u32);
/*
* Send a fcp cmd from fsp pkt.
*
* The resp handler is called when FCP_RSP received.
*
+ * STATUS: OPTIONAL
*/
int (*fcp_cmd_send)(struct fc_lport *lp, struct fc_fcp_pkt *fsp,
void (*resp)(struct fc_seq *, struct fc_frame *fp,
void *arg));
/*
- * Used at least durring linkdown and reset
+ * Cleanup the FCP layer, used durring link down and reset
+ *
+ * STATUS: OPTIONAL
*/
void (*fcp_cleanup)(struct fc_lport *lp);
/*
* Abort all I/O on a local port
+ *
+ * STATUS: OPTIONAL
*/
void (*fcp_abort_io)(struct fc_lport *lp);
- /**
- * Discovery interfaces
+ /*
+ * Receive a request for the discovery layer.
+ *
+ * STATUS: OPTIONAL
*/
-
void (*disc_recv_req)(struct fc_seq *,
struct fc_frame *, struct fc_lport *);
/*
* Start discovery for a local port.
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_start)(void (*disc_callback)(struct fc_lport *,
enum fc_disc_event),
/*
* Stop discovery for a given lport. This will remove
* all discovered rports
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_stop) (struct fc_lport *);
* Stop discovery for a given lport. This will block
* until all discovered rports are deleted from the
* FC transport class
+ *
+ * STATUS: OPTIONAL
*/
void (*disc_stop_final) (struct fc_lport *);
};
/* Operational Information */
struct libfc_function_template tt;
- u16 link_status;
+ u8 link_up;
+ u8 qfull;
enum fc_lport_state state;
unsigned long boot_time;
struct delayed_work disc_work;
};
-/**
+/*
* FC_LPORT HELPER FUNCTIONS
*****************************/
static inline void *lport_priv(const struct fc_lport *lp)
}
-/**
+/*
* LOCAL PORT LAYER
*****************************/
int fc_lport_init(struct fc_lport *lp);
*/
void fc_linkdown(struct fc_lport *);
-/*
- * Pause and unpause traffic.
- */
-void fc_pause(struct fc_lport *);
-void fc_unpause(struct fc_lport *);
-
/*
* Configure the local port.
*/
int fc_set_mfs(struct fc_lport *lp, u32 mfs);
-/**
+/*
* REMOTE PORT LAYER
*****************************/
int fc_rport_init(struct fc_lport *lp);
void fc_rport_terminate_io(struct fc_rport *rp);
-/**
+/*
* DISCOVERY LAYER
*****************************/
int fc_disc_init(struct fc_lport *lp);
-/**
+/*
* SCSI LAYER
*****************************/
/*
*/
void fc_fcp_destroy(struct fc_lport *);
-/**
+/*
* ELS/CT interface
*****************************/
/*
int fc_elsct_init(struct fc_lport *lp);
-/**
+/*
* EXCHANGE MANAGER LAYER
*****************************/
/*
* If s_id is non-zero, reset only exchanges originating from that FID.
* If d_id is non-zero, reset only exchanges sending to that FID.
*/
-void fc_exch_mgr_reset(struct fc_exch_mgr *, u32 s_id, u32 d_id);
+void fc_exch_mgr_reset(struct fc_lport *, u32 s_id, u32 d_id);
/*
* Functions for fc_functions_template
struct net_device *phys_dev; /* device with ethtool_ops */
struct packet_type fcoe_packet_type;
struct sk_buff_head fcoe_pending_queue;
+ u8 fcoe_pending_queue_active;
u8 dest_addr[ETH_ALEN];
u8 ctl_src_addr[ETH_ALEN];
u8 address_mode;
};
-static inline struct fcoe_softc *fcoe_softc(
- const struct fc_lport *lp)
-{
- return (struct fcoe_softc *)lport_priv(lp);
-}
-
static inline struct net_device *fcoe_netdev(
const struct fc_lport *lp)
{
- return fcoe_softc(lp)->real_dev;
+ return ((struct fcoe_softc *)lport_priv(lp))->real_dev;
}
static inline struct fcoe_hdr *skb_fcoe_header(const struct sk_buff *skb)
__entry->irq, __entry->ret ? "handled" : "unhandled")
);
+TRACE_FORMAT(softirq_entry,
+ TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+ TP_ARGS(h, vec),
+ TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
+ );
+
+TRACE_FORMAT(softirq_exit,
+ TP_PROTO(struct softirq_action *h, struct softirq_action *vec),
+ TP_ARGS(h, vec),
+ TP_FMT("softirq=%d action=%s", (int)(h - vec), softirq_to_name[h-vec])
+ );
+
#undef TRACE_SYSTEM
#include <linux/ftrace.h>
#include <linux/smp.h>
#include <linux/tick.h>
+#include <trace/irq.h>
#include <asm/irq.h>
/*
static DEFINE_PER_CPU(struct task_struct *, ksoftirqd);
+char *softirq_to_name[NR_SOFTIRQS] = {
+ "HI", "TIMER", "NET_TX", "NET_RX", "BLOCK",
+ "TASKLET", "SCHED", "HRTIMER", "RCU"
+};
+
/*
* we cannot loop indefinitely here to avoid userspace starvation,
* but we also don't want to introduce a worst case 1/HZ latency
*/
#define MAX_SOFTIRQ_RESTART 10
+DEFINE_TRACE(softirq_entry);
+DEFINE_TRACE(softirq_exit);
+
asmlinkage void __do_softirq(void)
{
struct softirq_action *h;
if (pending & 1) {
int prev_count = preempt_count();
+ trace_softirq_entry(h, softirq_vec);
h->action(h);
-
+ trace_softirq_exit(h, softirq_vec);
if (unlikely(prev_count != preempt_count())) {
- printk(KERN_ERR "huh, entered softirq %td %p"
+ printk(KERN_ERR "huh, entered softirq %td %s %p"
"with preempt_count %08x,"
" exited with %08x?\n", h - softirq_vec,
+ softirq_to_name[h - softirq_vec],
h->action, prev_count, preempt_count());
preempt_count() = prev_count;
}
static int ftrace_filtered;
-static LIST_HEAD(ftrace_new_addrs);
+static struct dyn_ftrace *ftrace_new_addrs;
static DEFINE_MUTEX(ftrace_regex_lock);
mutex_lock(&ftrace_lock);
do_for_each_ftrace_rec(pg, rec) {
- if ((rec->ip >= s) && (rec->ip < e))
+ if ((rec->ip >= s) && (rec->ip < e) &&
+ !(rec->flags & FTRACE_FL_FREE))
ftrace_free_rec(rec);
} while_for_each_ftrace_rec();
mutex_unlock(&ftrace_lock);
return NULL;
rec->ip = ip;
-
- list_add(&rec->list, &ftrace_new_addrs);
+ rec->flags = (unsigned long)ftrace_new_addrs;
+ ftrace_new_addrs = rec;
return rec;
}
do_for_each_ftrace_rec(pg, rec) {
/*
- * Skip over free records and records that have
- * failed.
+ * Skip over free records, records that have
+ * failed and not converted.
*/
if (rec->flags & FTRACE_FL_FREE ||
- rec->flags & FTRACE_FL_FAILED)
+ rec->flags & FTRACE_FL_FAILED ||
+ rec->flags & FTRACE_FL_CONVERTED)
continue;
/* ignore updates to this record's mcount site */
}
failed = __ftrace_replace_code(rec, enable);
- if (failed && (rec->flags & FTRACE_FL_CONVERTED)) {
+ if (failed) {
rec->flags |= FTRACE_FL_FAILED;
if ((system_state == SYSTEM_BOOTING) ||
!core_kernel_text(rec->ip)) {
static int ftrace_update_code(struct module *mod)
{
- struct dyn_ftrace *p, *t;
+ struct dyn_ftrace *p;
cycle_t start, stop;
start = ftrace_now(raw_smp_processor_id());
ftrace_update_cnt = 0;
- list_for_each_entry_safe(p, t, &ftrace_new_addrs, list) {
+ while (ftrace_new_addrs) {
/* If something went wrong, bail without enabling anything */
if (unlikely(ftrace_disabled))
return -1;
- list_del_init(&p->list);
+ p = ftrace_new_addrs;
+ ftrace_new_addrs = (struct dyn_ftrace *)p->flags;
+ p->flags = 0L;
/* convert record (i.e, patch mcount-call with NOP) */
if (ftrace_code_disable(mod, p)) {
return ftrace_regex_open(inode, file, 0);
}
-static ssize_t
-ftrace_regex_read(struct file *file, char __user *ubuf,
- size_t cnt, loff_t *ppos)
-{
- if (file->f_mode & FMODE_READ)
- return seq_read(file, ubuf, cnt, ppos);
- else
- return -EPERM;
-}
-
static loff_t
ftrace_regex_lseek(struct file *file, loff_t offset, int origin)
{
static const struct file_operations ftrace_filter_fops = {
.open = ftrace_filter_open,
- .read = ftrace_regex_read,
+ .read = seq_read,
.write = ftrace_filter_write,
.llseek = ftrace_regex_lseek,
.release = ftrace_filter_release,
static const struct file_operations ftrace_notrace_fops = {
.open = ftrace_notrace_open,
- .read = ftrace_regex_read,
+ .read = seq_read,
.write = ftrace_notrace_write,
.llseek = ftrace_regex_lseek,
.release = ftrace_notrace_release,
return ret;
}
-static ssize_t
-ftrace_graph_read(struct file *file, char __user *ubuf,
- size_t cnt, loff_t *ppos)
-{
- if (file->f_mode & FMODE_READ)
- return seq_read(file, ubuf, cnt, ppos);
- else
- return -EPERM;
-}
-
static int
ftrace_set_func(unsigned long *array, int *idx, char *buffer)
{
static const struct file_operations ftrace_graph_fops = {
.open = ftrace_graph_open,
- .read = ftrace_graph_read,
+ .read = seq_read,
.write = ftrace_graph_write,
};
#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
#include <linux/init.h>
#include <linux/hash.h>
#include <linux/list.h>
+#include <linux/cpu.h>
#include <linux/fs.h>
#include "trace.h"
+/*
+ * The ring buffer is made up of a list of pages. A separate list of pages is
+ * allocated for each CPU. A writer may only write to a buffer that is
+ * associated with the CPU it is currently executing on. A reader may read
+ * from any per cpu buffer.
+ *
+ * The reader is special. For each per cpu buffer, the reader has its own
+ * reader page. When a reader has read the entire reader page, this reader
+ * page is swapped with another page in the ring buffer.
+ *
+ * Now, as long as the writer is off the reader page, the reader can do what
+ * ever it wants with that page. The writer will never write to that page
+ * again (as long as it is out of the ring buffer).
+ *
+ * Here's some silly ASCII art.
+ *
+ * +------+
+ * |reader| RING BUFFER
+ * |page |
+ * +------+ +---+ +---+ +---+
+ * | |-->| |-->| |
+ * +---+ +---+ +---+
+ * ^ |
+ * | |
+ * +---------------+
+ *
+ *
+ * +------+
+ * |reader| RING BUFFER
+ * |page |------------------v
+ * +------+ +---+ +---+ +---+
+ * | |-->| |-->| |
+ * +---+ +---+ +---+
+ * ^ |
+ * | |
+ * +---------------+
+ *
+ *
+ * +------+
+ * |reader| RING BUFFER
+ * |page |------------------v
+ * +------+ +---+ +---+ +---+
+ * ^ | |-->| |-->| |
+ * | +---+ +---+ +---+
+ * | |
+ * | |
+ * +------------------------------+
+ *
+ *
+ * +------+
+ * |buffer| RING BUFFER
+ * |page |------------------v
+ * +------+ +---+ +---+ +---+
+ * ^ | | | |-->| |
+ * | New +---+ +---+ +---+
+ * | Reader------^ |
+ * | page |
+ * +------------------------------+
+ *
+ *
+ * After we make this swap, the reader can hand this page off to the splice
+ * code and be done with it. It can even allocate a new page if it needs to
+ * and swap that into the ring buffer.
+ *
+ * We will be using cmpxchg soon to make all this lockless.
+ *
+ */
+
/*
* A fast way to enable or disable all ring buffers is to
* call tracing_on or tracing_off. Turning off the ring buffers
struct mutex mutex;
struct ring_buffer_per_cpu **buffers;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ struct notifier_block cpu_notify;
+#endif
};
struct ring_buffer_iter {
*/
extern int ring_buffer_page_too_big(void);
+#ifdef CONFIG_HOTPLUG_CPU
+static int __cpuinit rb_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu);
+#endif
+
/**
* ring_buffer_alloc - allocate a new ring_buffer
* @size: the size in bytes per cpu that is needed.
if (buffer->pages == 1)
buffer->pages++;
- cpumask_copy(buffer->cpumask, cpu_possible_mask);
+ get_online_cpus();
+ cpumask_copy(buffer->cpumask, cpu_online_mask);
buffer->cpus = nr_cpu_ids;
bsize = sizeof(void *) * nr_cpu_ids;
goto fail_free_buffers;
}
+#ifdef CONFIG_HOTPLUG_CPU
+ buffer->cpu_notify.notifier_call = rb_cpu_notify;
+ buffer->cpu_notify.priority = 0;
+ register_cpu_notifier(&buffer->cpu_notify);
+#endif
+
+ put_online_cpus();
mutex_init(&buffer->mutex);
return buffer;
fail_free_cpumask:
free_cpumask_var(buffer->cpumask);
+ put_online_cpus();
fail_free_buffer:
kfree(buffer);
{
int cpu;
+ get_online_cpus();
+
+#ifdef CONFIG_HOTPLUG_CPU
+ unregister_cpu_notifier(&buffer->cpu_notify);
+#endif
+
for_each_buffer_cpu(buffer, cpu)
rb_free_cpu_buffer(buffer->buffers[cpu]);
+ put_online_cpus();
+
free_cpumask_var(buffer->cpumask);
kfree(buffer);
return size;
mutex_lock(&buffer->mutex);
+ get_online_cpus();
nr_pages = DIV_ROUND_UP(size, BUF_PAGE_SIZE);
if (size < buffer_size) {
/* easy case, just free pages */
- if (RB_WARN_ON(buffer, nr_pages >= buffer->pages)) {
- mutex_unlock(&buffer->mutex);
- return -1;
- }
+ if (RB_WARN_ON(buffer, nr_pages >= buffer->pages))
+ goto out_fail;
rm_pages = buffer->pages - nr_pages;
* add these pages to the cpu_buffers. Otherwise we just free
* them all and return -ENOMEM;
*/
- if (RB_WARN_ON(buffer, nr_pages <= buffer->pages)) {
- mutex_unlock(&buffer->mutex);
- return -1;
- }
+ if (RB_WARN_ON(buffer, nr_pages <= buffer->pages))
+ goto out_fail;
new_pages = nr_pages - buffer->pages;
rb_insert_pages(cpu_buffer, &pages, new_pages);
}
- if (RB_WARN_ON(buffer, !list_empty(&pages))) {
- mutex_unlock(&buffer->mutex);
- return -1;
- }
+ if (RB_WARN_ON(buffer, !list_empty(&pages)))
+ goto out_fail;
out:
buffer->pages = nr_pages;
+ put_online_cpus();
mutex_unlock(&buffer->mutex);
return size;
list_del_init(&bpage->list);
free_buffer_page(bpage);
}
+ put_online_cpus();
mutex_unlock(&buffer->mutex);
return -ENOMEM;
+
+ /*
+ * Something went totally wrong, and we are too paranoid
+ * to even clean up the mess.
+ */
+ out_fail:
+ put_online_cpus();
+ mutex_unlock(&buffer->mutex);
+ return -1;
}
EXPORT_SYMBOL_GPL(ring_buffer_resize);
unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
+ unsigned long ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
- return cpu_buffer->entries;
+ ret = cpu_buffer->entries;
+
+ return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_entries_cpu);
unsigned long ring_buffer_overrun_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
+ unsigned long ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 0;
cpu_buffer = buffer->buffers[cpu];
- return cpu_buffer->overrun;
+ ret = cpu_buffer->overrun;
+
+ return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_overrun_cpu);
*/
void ring_buffer_iter_reset(struct ring_buffer_iter *iter)
{
- struct ring_buffer_per_cpu *cpu_buffer = iter->cpu_buffer;
+ struct ring_buffer_per_cpu *cpu_buffer;
unsigned long flags;
+ if (!iter)
+ return;
+
+ cpu_buffer = iter->cpu_buffer;
+
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
rb_iter_reset(iter);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
struct buffer_page *reader;
int nr_loops = 0;
- if (!cpumask_test_cpu(cpu, buffer->cpumask))
- return NULL;
-
cpu_buffer = buffer->buffers[cpu];
again:
struct ring_buffer_event *event;
unsigned long flags;
+ if (!cpumask_test_cpu(cpu, buffer->cpumask))
+ return NULL;
+
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
event = rb_buffer_peek(buffer, cpu, ts);
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
struct ring_buffer_event *
ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
{
- struct ring_buffer_per_cpu *cpu_buffer = buffer->buffers[cpu];
- struct ring_buffer_event *event;
+ struct ring_buffer_per_cpu *cpu_buffer;
+ struct ring_buffer_event *event = NULL;
unsigned long flags;
+ /* might be called in atomic */
+ preempt_disable();
+
if (!cpumask_test_cpu(cpu, buffer->cpumask))
- return NULL;
+ goto out;
+ cpu_buffer = buffer->buffers[cpu];
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
event = rb_buffer_peek(buffer, cpu, ts);
if (!event)
- goto out;
+ goto out_unlock;
rb_advance_reader(cpu_buffer);
- out:
+ out_unlock:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+ out:
+ preempt_enable();
+
return event;
}
EXPORT_SYMBOL_GPL(ring_buffer_consume);
if (!rb_per_cpu_empty(cpu_buffer))
return 0;
}
+
return 1;
}
EXPORT_SYMBOL_GPL(ring_buffer_empty);
int ring_buffer_empty_cpu(struct ring_buffer *buffer, int cpu)
{
struct ring_buffer_per_cpu *cpu_buffer;
+ int ret;
if (!cpumask_test_cpu(cpu, buffer->cpumask))
return 1;
cpu_buffer = buffer->buffers[cpu];
- return rb_per_cpu_empty(cpu_buffer);
+ ret = rb_per_cpu_empty(cpu_buffer);
+
+
+ return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_empty_cpu);
{
struct ring_buffer_per_cpu *cpu_buffer_a;
struct ring_buffer_per_cpu *cpu_buffer_b;
+ int ret = -EINVAL;
if (!cpumask_test_cpu(cpu, buffer_a->cpumask) ||
!cpumask_test_cpu(cpu, buffer_b->cpumask))
- return -EINVAL;
+ goto out;
/* At least make sure the two buffers are somewhat the same */
if (buffer_a->pages != buffer_b->pages)
- return -EINVAL;
+ goto out;
+
+ ret = -EAGAIN;
if (ring_buffer_flags != RB_BUFFERS_ON)
- return -EAGAIN;
+ goto out;
if (atomic_read(&buffer_a->record_disabled))
- return -EAGAIN;
+ goto out;
if (atomic_read(&buffer_b->record_disabled))
- return -EAGAIN;
+ goto out;
cpu_buffer_a = buffer_a->buffers[cpu];
cpu_buffer_b = buffer_b->buffers[cpu];
if (atomic_read(&cpu_buffer_a->record_disabled))
- return -EAGAIN;
+ goto out;
if (atomic_read(&cpu_buffer_b->record_disabled))
- return -EAGAIN;
+ goto out;
/*
* We can't do a synchronize_sched here because this
atomic_dec(&cpu_buffer_a->record_disabled);
atomic_dec(&cpu_buffer_b->record_disabled);
- return 0;
+ ret = 0;
+out:
+ return ret;
}
EXPORT_SYMBOL_GPL(ring_buffer_swap_cpu);
u64 save_timestamp;
int ret = -1;
+ if (!cpumask_test_cpu(cpu, buffer->cpumask))
+ goto out;
+
/*
* If len is not big enough to hold the page header, then
* we can not copy anything.
*/
if (len <= BUF_PAGE_HDR_SIZE)
- return -1;
+ goto out;
len -= BUF_PAGE_HDR_SIZE;
if (!data_page)
- return -1;
+ goto out;
bpage = *data_page;
if (!bpage)
- return -1;
+ goto out;
spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
reader = rb_get_reader_page(cpu_buffer);
if (!reader)
- goto out;
+ goto out_unlock;
event = rb_reader_event(cpu_buffer);
unsigned int size;
if (full)
- goto out;
+ goto out_unlock;
if (len > (commit - read))
len = (commit - read);
size = rb_event_length(event);
if (len < size)
- goto out;
+ goto out_unlock;
/* save the current timestamp, since the user will need it */
save_timestamp = cpu_buffer->read_stamp;
}
ret = read;
- out:
+ out_unlock:
spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+ out:
return ret;
}
}
fs_initcall(rb_init_debugfs);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static int __cpuinit rb_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct ring_buffer *buffer =
+ container_of(self, struct ring_buffer, cpu_notify);
+ long cpu = (long)hcpu;
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ if (cpu_isset(cpu, *buffer->cpumask))
+ return NOTIFY_OK;
+
+ buffer->buffers[cpu] =
+ rb_allocate_cpu_buffer(buffer, cpu);
+ if (!buffer->buffers[cpu]) {
+ WARN(1, "failed to allocate ring buffer on CPU %ld\n",
+ cpu);
+ return NOTIFY_OK;
+ }
+ smp_wmb();
+ cpu_set(cpu, *buffer->cpumask);
+ break;
+ case CPU_DOWN_PREPARE:
+ case CPU_DOWN_PREPARE_FROZEN:
+ /*
+ * Do nothing.
+ * If we were to free the buffer, then the user would
+ * lose any trace that was in the buffer.
+ */
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+#endif
unsigned long __read_mostly tracing_max_latency;
unsigned long __read_mostly tracing_thresh;
+/*
+ * On boot up, the ring buffer is set to the minimum size, so that
+ * we do not waste memory on systems that are not using tracing.
+ */
+static int ring_buffer_expanded;
+
/*
* We need to change this state when a selftest is running.
* A selftest will lurk into the ring-buffer to count the
{
strncpy(bootup_tracer_buf, str, BOOTUP_TRACER_SIZE);
default_bootup_tracer = bootup_tracer_buf;
+ /* We are using ftrace early, expand it */
+ ring_buffer_expanded = 1;
return 1;
}
__setup("ftrace=", set_ftrace);
/**
- * trace_vprintk - write binary msg to tracing buffer
+ * trace_vbprintk - write binary msg to tracing buffer
*
*/
-int trace_vprintk(unsigned long ip, int depth, const char *fmt, va_list args)
+int trace_vbprintk(unsigned long ip, int depth, const char *fmt, va_list args)
{
static raw_spinlock_t trace_buf_lock =
(raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
struct ring_buffer_event *event;
struct trace_array *tr = &global_trace;
struct trace_array_cpu *data;
- struct print_entry *entry;
+ struct bprint_entry *entry;
unsigned long flags;
int resched;
int cpu, len = 0, size, pc;
goto out_unlock;
size = sizeof(*entry) + sizeof(u32) * len;
- event = trace_buffer_lock_reserve(tr, TRACE_PRINT, size, flags, pc);
+ event = trace_buffer_lock_reserve(tr, TRACE_BPRINT, size, flags, pc);
if (!event)
goto out_unlock;
entry = ring_buffer_event_data(event);
return len;
}
+EXPORT_SYMBOL_GPL(trace_vbprintk);
+
+int trace_vprintk(unsigned long ip, int depth, const char *fmt, va_list args)
+{
+ static raw_spinlock_t trace_buf_lock = __RAW_SPIN_LOCK_UNLOCKED;
+ static char trace_buf[TRACE_BUF_SIZE];
+
+ struct ring_buffer_event *event;
+ struct trace_array *tr = &global_trace;
+ struct trace_array_cpu *data;
+ int cpu, len = 0, size, pc;
+ struct print_entry *entry;
+ unsigned long irq_flags;
+
+ if (tracing_disabled || tracing_selftest_running)
+ return 0;
+
+ pc = preempt_count();
+ preempt_disable_notrace();
+ cpu = raw_smp_processor_id();
+ data = tr->data[cpu];
+
+ if (unlikely(atomic_read(&data->disabled)))
+ goto out;
+
+ pause_graph_tracing();
+ raw_local_irq_save(irq_flags);
+ __raw_spin_lock(&trace_buf_lock);
+ len = vsnprintf(trace_buf, TRACE_BUF_SIZE, fmt, args);
+
+ len = min(len, TRACE_BUF_SIZE-1);
+ trace_buf[len] = 0;
+
+ size = sizeof(*entry) + len + 1;
+ event = trace_buffer_lock_reserve(tr, TRACE_PRINT, size, irq_flags, pc);
+ if (!event)
+ goto out_unlock;
+ entry = ring_buffer_event_data(event);
+ entry->ip = ip;
+ entry->depth = depth;
+
+ memcpy(&entry->buf, trace_buf, len);
+ entry->buf[len] = 0;
+ ring_buffer_unlock_commit(tr->buffer, event);
+
+ out_unlock:
+ __raw_spin_unlock(&trace_buf_lock);
+ raw_local_irq_restore(irq_flags);
+ unpause_graph_tracing();
+ out:
+ preempt_enable_notrace();
+
+ return len;
+}
EXPORT_SYMBOL_GPL(trace_vprintk);
enum trace_file_type {
return TRACE_TYPE_HANDLED;
}
+static enum print_line_t print_bprintk_msg_only(struct trace_iterator *iter)
+{
+ struct trace_seq *s = &iter->seq;
+ struct trace_entry *entry = iter->ent;
+ struct bprint_entry *field;
+ int ret;
+
+ trace_assign_type(field, entry);
+
+ ret = trace_seq_bprintf(s, field->fmt, field->buf);
+ if (!ret)
+ return TRACE_TYPE_PARTIAL_LINE;
+
+ return TRACE_TYPE_HANDLED;
+}
+
static enum print_line_t print_printk_msg_only(struct trace_iterator *iter)
{
struct trace_seq *s = &iter->seq;
trace_assign_type(field, entry);
- ret = trace_seq_bprintf(s, field->fmt, field->buf);
+ ret = trace_seq_printf(s, "%s", field->buf);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
{
int cpu;
+ /* If we are looking at one CPU buffer, only check that one */
+ if (iter->cpu_file != TRACE_PIPE_ALL_CPU) {
+ cpu = iter->cpu_file;
+ if (iter->buffer_iter[cpu]) {
+ if (!ring_buffer_iter_empty(iter->buffer_iter[cpu]))
+ return 0;
+ } else {
+ if (!ring_buffer_empty_cpu(iter->tr->buffer, cpu))
+ return 0;
+ }
+ return 1;
+ }
+
for_each_tracing_cpu(cpu) {
if (iter->buffer_iter[cpu]) {
if (!ring_buffer_iter_empty(iter->buffer_iter[cpu]))
return ret;
}
+ if (iter->ent->type == TRACE_BPRINT &&
+ trace_flags & TRACE_ITER_PRINTK &&
+ trace_flags & TRACE_ITER_PRINTK_MSGONLY)
+ return print_bprintk_msg_only(iter);
+
if (iter->ent->type == TRACE_PRINT &&
trace_flags & TRACE_ITER_PRINTK &&
trace_flags & TRACE_ITER_PRINTK_MSGONLY)
iter->buffer_iter[cpu] =
ring_buffer_read_start(iter->tr->buffer, cpu);
-
- if (!iter->buffer_iter[cpu])
- goto fail_buffer;
}
} else {
cpu = iter->cpu_file;
iter->buffer_iter[cpu] =
ring_buffer_read_start(iter->tr->buffer, cpu);
-
- if (!iter->buffer_iter[cpu])
- goto fail;
}
/* TODO stop tracer */
return t->init(tr);
}
+static int tracing_resize_ring_buffer(unsigned long size)
+{
+ int ret;
+
+ /*
+ * If kernel or user changes the size of the ring buffer
+ * we use the size that was given, and we can forget about
+ * expanding it later.
+ */
+ ring_buffer_expanded = 1;
+
+ ret = ring_buffer_resize(global_trace.buffer, size);
+ if (ret < 0)
+ return ret;
+
+ ret = ring_buffer_resize(max_tr.buffer, size);
+ if (ret < 0) {
+ int r;
+
+ r = ring_buffer_resize(global_trace.buffer,
+ global_trace.entries);
+ if (r < 0) {
+ /*
+ * AARGH! We are left with different
+ * size max buffer!!!!
+ * The max buffer is our "snapshot" buffer.
+ * When a tracer needs a snapshot (one of the
+ * latency tracers), it swaps the max buffer
+ * with the saved snap shot. We succeeded to
+ * update the size of the main buffer, but failed to
+ * update the size of the max buffer. But when we tried
+ * to reset the main buffer to the original size, we
+ * failed there too. This is very unlikely to
+ * happen, but if it does, warn and kill all
+ * tracing.
+ */
+ WARN_ON(1);
+ tracing_disabled = 1;
+ }
+ return ret;
+ }
+
+ global_trace.entries = size;
+
+ return ret;
+}
+
+/**
+ * tracing_update_buffers - used by tracing facility to expand ring buffers
+ *
+ * To save on memory when the tracing is never used on a system with it
+ * configured in. The ring buffers are set to a minimum size. But once
+ * a user starts to use the tracing facility, then they need to grow
+ * to their default size.
+ *
+ * This function is to be called when a tracer is about to be used.
+ */
+int tracing_update_buffers(void)
+{
+ int ret = 0;
+
+ mutex_lock(&trace_types_lock);
+ if (!ring_buffer_expanded)
+ ret = tracing_resize_ring_buffer(trace_buf_size);
+ mutex_unlock(&trace_types_lock);
+
+ return ret;
+}
+
struct trace_option_dentry;
static struct trace_option_dentry *
int ret = 0;
mutex_lock(&trace_types_lock);
+
+ if (!ring_buffer_expanded) {
+ ret = tracing_resize_ring_buffer(trace_buf_size);
+ if (ret < 0)
+ return ret;
+ ret = 0;
+ }
+
for (t = trace_types; t; t = t->next) {
if (strcmp(t->name, buf) == 0)
break;
size_t cnt, loff_t *ppos)
{
struct trace_array *tr = filp->private_data;
- char buf[64];
+ char buf[96];
int r;
- r = sprintf(buf, "%lu\n", tr->entries >> 10);
+ mutex_lock(&trace_types_lock);
+ if (!ring_buffer_expanded)
+ r = sprintf(buf, "%lu (expanded: %lu)\n",
+ tr->entries >> 10,
+ trace_buf_size >> 10);
+ else
+ r = sprintf(buf, "%lu\n", tr->entries >> 10);
+ mutex_unlock(&trace_types_lock);
+
return simple_read_from_buffer(ubuf, cnt, ppos, buf, r);
}
val <<= 10;
if (val != global_trace.entries) {
- ret = ring_buffer_resize(global_trace.buffer, val);
+ ret = tracing_resize_ring_buffer(val);
if (ret < 0) {
cnt = ret;
goto out;
}
-
- ret = ring_buffer_resize(max_tr.buffer, val);
- if (ret < 0) {
- int r;
- cnt = ret;
- r = ring_buffer_resize(global_trace.buffer,
- global_trace.entries);
- if (r < 0) {
- /* AARGH! We are left with different
- * size max buffer!!!! */
- WARN_ON(1);
- tracing_disabled = 1;
- }
- goto out;
- }
-
- global_trace.entries = val;
}
filp->f_pos += cnt;
(void *) cpu, &tracing_fops);
if (!entry)
pr_warning("Could not create debugfs 'trace' entry\n");
+
+ entry = debugfs_create_file("trace_pipe_raw", 0444, d_cpu,
+ (void *) cpu, &tracing_buffers_fops);
+ if (!entry)
+ pr_warning("Could not create debugfs 'trace_pipe_raw' entry\n");
}
#ifdef CONFIG_FTRACE_SELFTEST
static __init int tracer_init_debugfs(void)
{
struct dentry *d_tracer;
- struct dentry *buffers;
struct dentry *entry;
int cpu;
pr_warning("Could not create debugfs "
"'trace_marker' entry\n");
- buffers = debugfs_create_dir("binary_buffers", d_tracer);
-
- if (!buffers)
- pr_warning("Could not create buffers directory\n");
- else {
- int cpu;
- char buf[64];
-
- for_each_tracing_cpu(cpu) {
- sprintf(buf, "%d", cpu);
-
- entry = debugfs_create_file(buf, 0444, buffers,
- (void *)(long)cpu,
- &tracing_buffers_fops);
- if (!entry)
- pr_warning("Could not create debugfs buffers "
- "'%s' entry\n", buf);
- }
- }
-
#ifdef CONFIG_DYNAMIC_FTRACE
entry = debugfs_create_file("dyn_ftrace_total_info", 0444, d_tracer,
&ftrace_update_tot_cnt,
__init static int tracer_alloc_buffers(void)
{
struct trace_array_cpu *data;
+ int ring_buf_size;
int i;
int ret = -ENOMEM;
if (!alloc_cpumask_var(&tracing_reader_cpumask, GFP_KERNEL))
goto out_free_tracing_cpumask;
+ /* To save memory, keep the ring buffer size to its minimum */
+ if (ring_buffer_expanded)
+ ring_buf_size = trace_buf_size;
+ else
+ ring_buf_size = 1;
+
cpumask_copy(tracing_buffer_mask, cpu_possible_mask);
cpumask_copy(tracing_cpumask, cpu_all_mask);
cpumask_clear(tracing_reader_cpumask);
/* TODO: make the number of buffers hot pluggable with CPUS */
- global_trace.buffer = ring_buffer_alloc(trace_buf_size,
+ global_trace.buffer = ring_buffer_alloc(ring_buf_size,
TRACE_BUFFER_FLAGS);
if (!global_trace.buffer) {
printk(KERN_ERR "tracer: failed to allocate ring buffer!\n");
#ifdef CONFIG_TRACER_MAX_TRACE
- max_tr.buffer = ring_buffer_alloc(trace_buf_size,
+ max_tr.buffer = ring_buffer_alloc(ring_buf_size,
TRACE_BUFFER_FLAGS);
if (!max_tr.buffer) {
printk(KERN_ERR "tracer: failed to allocate max ring buffer!\n");
TRACE_WAKE,
TRACE_STACK,
TRACE_PRINT,
+ TRACE_BPRINT,
TRACE_SPECIAL,
TRACE_MMIO_RW,
TRACE_MMIO_MAP,
/*
* trace_printk entry:
*/
-struct print_entry {
+struct bprint_entry {
struct trace_entry ent;
unsigned long ip;
int depth;
u32 buf[];
};
+struct print_entry {
+ struct trace_entry ent;
+ unsigned long ip;
+ int depth;
+ char buf[];
+};
+
#define TRACE_OLD_SIZE 88
struct trace_field_cont {
IF_ASSIGN(var, ent, struct stack_entry, TRACE_STACK); \
IF_ASSIGN(var, ent, struct userstack_entry, TRACE_USER_STACK);\
IF_ASSIGN(var, ent, struct print_entry, TRACE_PRINT); \
+ IF_ASSIGN(var, ent, struct bprint_entry, TRACE_BPRINT); \
IF_ASSIGN(var, ent, struct special_entry, 0); \
IF_ASSIGN(var, ent, struct trace_mmiotrace_rw, \
TRACE_MMIO_RW); \
extern void *head_page(struct trace_array_cpu *data);
extern long ns2usecs(cycle_t nsec);
extern int
+trace_vbprintk(unsigned long ip, int depth, const char *fmt, va_list args);
+extern int
trace_vprintk(unsigned long ip, int depth, const char *fmt, va_list args);
extern unsigned long trace_flags;
}
#endif /* CONFIG_BRANCH_TRACER */
+/* set ring buffers to default size if not already done so */
+int tracing_update_buffers(void);
+
/* trace event type bit fields, not numeric */
enum {
TRACE_EVENT_TYPE_PRINTF = 1,
extern struct ftrace_event_call __start_ftrace_events[];
extern struct ftrace_event_call __stop_ftrace_events[];
+extern const char *__start___trace_bprintk_fmt[];
+extern const char *__stop___trace_bprintk_fmt[];
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement optimizing out.
+ */
+#define event_trace_printk(ip, fmt, args...) \
+do { \
+ __trace_printk_check_format(fmt, ##args); \
+ tracing_record_cmdline(current); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(ip, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(ip, fmt, ##args); \
+} while (0)
+
#endif /* _LINUX_KERNEL_TRACE_H */
"\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n\t=> (%08lx)\n")
);
-TRACE_EVENT_FORMAT(print, TRACE_PRINT, print_entry, ignore,
+TRACE_EVENT_FORMAT(bprint, TRACE_BPRINT, bprint_entry, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned long, ip, ip)
TRACE_FIELD(unsigned int, depth, depth)
TP_RAW_FMT("%08lx (%d) fmt:%p %s")
);
+TRACE_EVENT_FORMAT(print, TRACE_PRINT, print_entry, ignore,
+ TRACE_STRUCT(
+ TRACE_FIELD(unsigned long, ip, ip)
+ TRACE_FIELD(unsigned int, depth, depth)
+ TRACE_FIELD_ZERO_CHAR(buf)
+ ),
+ TP_RAW_FMT("%08lx (%d) fmt:%p %s")
+);
+
TRACE_EVENT_FORMAT(branch, TRACE_BRANCH, trace_branch, ignore,
TRACE_STRUCT(
TRACE_FIELD(unsigned int, line, line)
(unsigned long)event < (unsigned long)__stop_ftrace_events; \
event++)
-void event_trace_printk(unsigned long ip, const char *fmt, ...)
-{
- va_list ap;
-
- va_start(ap, fmt);
- tracing_record_cmdline(current);
- trace_vprintk(ip, task_curr_ret_stack(current), fmt, ap);
- va_end(ap);
-}
-
static void ftrace_clear_events(void)
{
struct ftrace_event_call *call = (void *)__start_ftrace_events;
if (!cnt || cnt < 0)
return 0;
+ ret = tracing_update_buffers();
+ if (ret < 0)
+ return ret;
+
ret = get_user(ch, ubuf++);
if (ret)
return ret;
if (ret < 0)
return ret;
+ ret = tracing_update_buffers();
+ if (ret < 0)
+ return ret;
+
switch (val) {
case 0:
case 1:
\
field = (typeof(field))entry; \
\
- ret = trace_seq_printf(s, print); \
+ ret = trace_seq_printf(s, #call ": " print); \
if (!ret) \
return TRACE_TYPE_PARTIAL_LINE; \
\
}
static enum print_line_t
-print_graph_comment(struct print_entry *trace, struct trace_seq *s,
+print_graph_comment(struct bprint_entry *trace, struct trace_seq *s,
struct trace_entry *ent, struct trace_iterator *iter)
{
int i;
trace_assign_type(field, entry);
return print_graph_return(&field->ret, s, entry, iter);
}
- case TRACE_PRINT: {
- struct print_entry *field;
+ case TRACE_BPRINT: {
+ struct bprint_entry *field;
trace_assign_type(field, entry);
return print_graph_comment(field, s, entry, iter);
}
{
struct trace_entry *entry = iter->ent;
struct print_entry *print = (struct print_entry *)entry;
+ const char *msg = print->buf;
struct trace_seq *s = &iter->seq;
unsigned long long t = ns2usecs(iter->ts);
unsigned long usec_rem = do_div(t, USEC_PER_SEC);
int ret;
/* The trailing newline must be in the message. */
- ret = trace_seq_printf(s, "MARK %u.%06lu ", secs, usec_rem);
- if (!ret)
- return TRACE_TYPE_PARTIAL_LINE;
-
- ret = trace_seq_bprintf(s, print->fmt, print->buf);
+ ret = trace_seq_printf(s, "MARK %u.%06lu %s", secs, usec_rem, msg);
if (!ret)
return TRACE_TYPE_PARTIAL_LINE;
.binary = trace_special_bin,
};
-/* TRACE_PRINT */
+/* TRACE_BPRINT */
static enum print_line_t
-trace_print_print(struct trace_iterator *iter, int flags)
+trace_bprint_print(struct trace_iterator *iter, int flags)
{
struct trace_entry *entry = iter->ent;
struct trace_seq *s = &iter->seq;
- struct print_entry *field;
+ struct bprint_entry *field;
trace_assign_type(field, entry);
}
-static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags)
+static enum print_line_t
+trace_bprint_raw(struct trace_iterator *iter, int flags)
{
- struct print_entry *field;
+ struct bprint_entry *field;
struct trace_seq *s = &iter->seq;
trace_assign_type(field, iter->ent);
}
+static struct trace_event trace_bprint_event = {
+ .type = TRACE_BPRINT,
+ .trace = trace_bprint_print,
+ .raw = trace_bprint_raw,
+};
+
+/* TRACE_PRINT */
+static enum print_line_t trace_print_print(struct trace_iterator *iter,
+ int flags)
+{
+ struct print_entry *field;
+ struct trace_seq *s = &iter->seq;
+
+ trace_assign_type(field, iter->ent);
+
+ if (!seq_print_ip_sym(s, field->ip, flags))
+ goto partial;
+
+ if (!trace_seq_printf(s, ": %s", field->buf))
+ goto partial;
+
+ return TRACE_TYPE_HANDLED;
+
+ partial:
+ return TRACE_TYPE_PARTIAL_LINE;
+}
+
+static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags)
+{
+ struct print_entry *field;
+
+ trace_assign_type(field, iter->ent);
+
+ if (!trace_seq_printf(&iter->seq, "# %lx %s", field->ip, field->buf))
+ goto partial;
+
+ return TRACE_TYPE_HANDLED;
+
+ partial:
+ return TRACE_TYPE_PARTIAL_LINE;
+}
+
static struct trace_event trace_print_event = {
- .type = TRACE_PRINT,
+ .type = TRACE_PRINT,
.trace = trace_print_print,
.raw = trace_print_raw,
};
+
static struct trace_event *events[] __initdata = {
&trace_fn_event,
&trace_ctx_event,
&trace_special_event,
&trace_stack_event,
&trace_user_stack_event,
+ &trace_bprint_event,
&trace_print_event,
NULL
};
* Copyright (C) 2008 Lai Jiangshan <laijs@cn.fujitsu.com>
*
*/
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
#include <linux/kernel.h>
#include <linux/ftrace.h>
#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/marker.h>
+#include <linux/mutex.h>
#include <linux/ctype.h>
#include <linux/list.h>
-#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/seq_file.h>
#include <linux/fs.h>
-#include <linux/marker.h>
-#include <linux/uaccess.h>
#include "trace.h"
.notifier_call = module_trace_bprintk_format_notify,
};
-int __trace_printk(unsigned long ip, const char *fmt, ...)
+int __trace_bprintk(unsigned long ip, const char *fmt, ...)
{
int ret;
va_list ap;
return 0;
va_start(ap, fmt);
- ret = trace_vprintk(ip, task_curr_ret_stack(current), fmt, ap);
+ ret = trace_vbprintk(ip, task_curr_ret_stack(current), fmt, ap);
va_end(ap);
return ret;
}
-EXPORT_SYMBOL_GPL(__trace_printk);
+EXPORT_SYMBOL_GPL(__trace_bprintk);
-int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap)
+int __ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap)
{
if (unlikely(!fmt))
return 0;
if (!(trace_flags & TRACE_ITER_PRINTK))
return 0;
+ return trace_vbprintk(ip, task_curr_ret_stack(current), fmt, ap);
+}
+EXPORT_SYMBOL_GPL(__ftrace_vbprintk);
+
+int __trace_printk(unsigned long ip, const char *fmt, ...)
+{
+ int ret;
+ va_list ap;
+
+ if (!(trace_flags & TRACE_ITER_PRINTK))
+ return 0;
+
+ va_start(ap, fmt);
+ ret = trace_vprintk(ip, task_curr_ret_stack(current), fmt, ap);
+ va_end(ap);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(__trace_printk);
+
+int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap)
+{
+ if (!(trace_flags & TRACE_ITER_PRINTK))
+ return 0;
+
return trace_vprintk(ip, task_curr_ret_stack(current), fmt, ap);
}
EXPORT_SYMBOL_GPL(__ftrace_vprintk);
+static void *
+t_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ const char **fmt = m->private;
+ const char **next = fmt;
+
+ (*pos)++;
+
+ if ((unsigned long)fmt >= (unsigned long)__stop___trace_bprintk_fmt)
+ return NULL;
+
+ next = fmt;
+ m->private = ++next;
+
+ return fmt;
+}
+
+static void *t_start(struct seq_file *m, loff_t *pos)
+{
+ return t_next(m, NULL, pos);
+}
+
+static int t_show(struct seq_file *m, void *v)
+{
+ const char **fmt = v;
+ const char *str = *fmt;
+ int i;
+
+ seq_printf(m, "0x%lx : \"", (unsigned long)fmt);
+
+ /*
+ * Tabs and new lines need to be converted.
+ */
+ for (i = 0; str[i]; i++) {
+ switch (str[i]) {
+ case '\n':
+ seq_puts(m, "\\n");
+ break;
+ case '\t':
+ seq_puts(m, "\\t");
+ break;
+ case '\\':
+ seq_puts(m, "\\");
+ break;
+ case '"':
+ seq_puts(m, "\\\"");
+ break;
+ default:
+ seq_putc(m, str[i]);
+ }
+ }
+ seq_puts(m, "\"\n");
+
+ return 0;
+}
+
+static void t_stop(struct seq_file *m, void *p)
+{
+}
+
+static const struct seq_operations show_format_seq_ops = {
+ .start = t_start,
+ .next = t_next,
+ .show = t_show,
+ .stop = t_stop,
+};
+
+static int
+ftrace_formats_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ ret = seq_open(file, &show_format_seq_ops);
+ if (!ret) {
+ struct seq_file *m = file->private_data;
+
+ m->private = __start___trace_bprintk_fmt;
+ }
+ return ret;
+}
+
+static const struct file_operations ftrace_formats_fops = {
+ .open = ftrace_formats_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static __init int init_trace_printk_function_export(void)
+{
+ struct dentry *d_tracer;
+ struct dentry *entry;
+
+ d_tracer = tracing_init_dentry();
+ if (!d_tracer)
+ return 0;
+
+ entry = debugfs_create_file("printk_formats", 0444, d_tracer,
+ NULL, &ftrace_formats_fops);
+ if (!entry)
+ pr_warning("Could not create debugfs "
+ "'printk_formats' entry\n");
+
+ return 0;
+}
+
+fs_initcall(init_trace_printk_function_export);
static __init int init_trace_printk(void)
{
#endif
}
+static void print_disabled(struct seq_file *m)
+{
+ seq_puts(m, "#\n"
+ "# Stack tracer disabled\n"
+ "#\n"
+ "# To enable the stack tracer, either add 'stacktrace' to the\n"
+ "# kernel command line\n"
+ "# or 'echo 1 > /proc/sys/kernel/stack_tracer_enabled'\n"
+ "#\n");
+}
+
static int t_show(struct seq_file *m, void *v)
{
long i;
int size;
if (v == SEQ_START_TOKEN) {
- seq_printf(m, " Depth Size Location"
+ seq_printf(m, " Depth Size Location"
" (%d entries)\n"
- " ----- ---- --------\n",
+ " ----- ---- --------\n",
max_stack_trace.nr_entries);
+
+ if (!stack_tracer_enabled && !max_stack_size)
+ print_disabled(m);
+
return 0;
}
struct cpu_workqueue_stats *cws = p;
unsigned long flags;
int cpu = cws->cpu;
- struct task_struct *tsk = find_task_by_vpid(cws->pid);
-
- seq_printf(s, "%3d %6d %6u %s\n", cws->cpu,
- atomic_read(&cws->inserted),
- cws->executed,
- tsk ? tsk->comm : "<...>");
+ struct pid *pid;
+ struct task_struct *tsk;
+
+ pid = find_get_pid(cws->pid);
+ if (pid) {
+ tsk = get_pid_task(pid, PIDTYPE_PID);
+ if (tsk) {
+ seq_printf(s, "%3d %6d %6u %s\n", cws->cpu,
+ atomic_read(&cws->inserted), cws->executed,
+ tsk->comm);
+ put_task_struct(tsk);
+ }
+ put_pid(pid);
+ }
spin_lock_irqsave(&workqueue_cpu_stat(cpu)->lock, flags);
if (&cws->list == workqueue_cpu_stat(cpu)->list.next)
*/
int bitmap_find_free_region(unsigned long *bitmap, int bits, int order)
{
- int pos; /* scans bitmap by regions of size order */
+ int pos, end; /* scans bitmap by regions of size order */
- for (pos = 0; pos < bits; pos += (1 << order))
- if (__reg_op(bitmap, pos, order, REG_OP_ISFREE))
- break;
- if (pos == bits)
- return -ENOMEM;
- __reg_op(bitmap, pos, order, REG_OP_ALLOC);
- return pos;
+ for (pos = 0 ; (end = pos + (1 << order)) <= bits; pos = end) {
+ if (!__reg_op(bitmap, pos, order, REG_OP_ISFREE))
+ continue;
+ __reg_op(bitmap, pos, order, REG_OP_ALLOC);
+ return pos;
+ }
+ return -ENOMEM;
}
EXPORT_SYMBOL(bitmap_find_free_region);
* Move the pages to the [file or anon] inactive list.
*/
pagevec_init(&pvec, 1);
- pgmoved = 0;
lru = LRU_BASE + file * LRU_FILE;
spin_lock_irq(&zone->lru_lock);
*/
reclaim_stat->recent_rotated[!!file] += pgmoved;
+ pgmoved = 0;
while (!list_empty(&l_inactive)) {
page = lru_to_page(&l_inactive);
prefetchw_prev_lru_page(page, &l_inactive, flags);
rpc_clear_queued(task);
if (rpc_test_and_set_running(task))
return;
- /* We might have raced */
- if (RPC_IS_QUEUED(task)) {
- rpc_clear_running(task);
- return;
- }
if (RPC_IS_ASYNC(task)) {
int status;
*/
static void __rpc_execute(struct rpc_task *task)
{
- int status = 0;
+ struct rpc_wait_queue *queue;
+ int task_is_async = RPC_IS_ASYNC(task);
+ int status = 0;
dprintk("RPC: %5u __rpc_execute flags=0x%x\n",
task->tk_pid, task->tk_flags);
*/
if (!RPC_IS_QUEUED(task))
continue;
- rpc_clear_running(task);
- if (RPC_IS_ASYNC(task)) {
- /* Careful! we may have raced... */
- if (RPC_IS_QUEUED(task))
- return;
- if (rpc_test_and_set_running(task))
- return;
+ /*
+ * The queue->lock protects against races with
+ * rpc_make_runnable().
+ *
+ * Note that once we clear RPC_TASK_RUNNING on an asynchronous
+ * rpc_task, rpc_make_runnable() can assign it to a
+ * different workqueue. We therefore cannot assume that the
+ * rpc_task pointer may still be dereferenced.
+ */
+ queue = task->tk_waitqueue;
+ spin_lock_bh(&queue->lock);
+ if (!RPC_IS_QUEUED(task)) {
+ spin_unlock_bh(&queue->lock);
continue;
}
+ rpc_clear_running(task);
+ spin_unlock_bh(&queue->lock);
+ if (task_is_async)
+ return;
/* sync task: sleep here */
dprintk("RPC: %5u sync task going to sleep\n", task->tk_pid);
xprt, (xprt_connected(xprt) ? "is" : "is not"));
if (!xprt_bound(xprt)) {
- task->tk_status = -EIO;
+ task->tk_status = -EAGAIN;
return;
}
if (!xprt_lock_write(xprt, task))
int err, sent = 0;
if (unlikely(!sock))
- return -ENOTCONN;
+ return -ENOTSOCK;
clear_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
if (base != 0) {
req->rq_svec->iov_base,
req->rq_svec->iov_len);
+ if (!xprt_bound(xprt))
+ return -ENOTCONN;
status = xs_sendpages(transport->sock,
xs_addr(xprt),
xprt->addrlen, xdr,
}
switch (status) {
+ case -ENOTSOCK:
+ status = -ENOTCONN;
+ /* Should we call xs_close() here? */
+ break;
case -EAGAIN:
xs_nospace(task);
break;
}
switch (status) {
+ case -ENOTSOCK:
+ status = -ENOTCONN;
+ /* Should we call xs_close() here? */
+ break;
case -EAGAIN:
xs_nospace(task);
break;
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
/* Start by resetting any existing state */
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
/* Start by resetting any existing state */
write_unlock_bh(&sk->sk_callback_lock);
}
+ if (!xprt_bound(xprt))
+ return -ENOTCONN;
+
/* Tell the socket layer to start connecting... */
xprt->stat.connect_count++;
xprt->stat.connect_start = jiffies;
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
if (!sock) {
struct socket *sock = transport->sock;
int err, status = -EIO;
- if (xprt->shutdown || !xprt_bound(xprt))
+ if (xprt->shutdown)
goto out;
if (!sock) {
optimize_result();
}
+/* guess for "linker script provide" symbol */
+static int may_be_linker_script_provide_symbol(const struct sym_entry *se)
+{
+ const char *symbol = (char *)se->sym + 1;
+ int len = se->len - 1;
+
+ if (len < 8)
+ return 0;
+
+ if (symbol[0] != '_' || symbol[1] != '_')
+ return 0;
+
+ /* __start_XXXXX */
+ if (!memcmp(symbol + 2, "start_", 6))
+ return 1;
+
+ /* __stop_XXXXX */
+ if (!memcmp(symbol + 2, "stop_", 5))
+ return 1;
+
+ /* __end_XXXXX */
+ if (!memcmp(symbol + 2, "end_", 4))
+ return 1;
+
+ /* __XXXXX_start */
+ if (!memcmp(symbol + len - 6, "_start", 6))
+ return 1;
+
+ /* __XXXXX_end */
+ if (!memcmp(symbol + len - 4, "_end", 4))
+ return 1;
+
+ return 0;
+}
+
+static int prefix_underscores_count(const char *str)
+{
+ const char *tail = str;
+
+ while (*tail != '_')
+ tail++;
+
+ return tail - str;
+}
+
static int compare_symbols(const void *a, const void *b)
{
const struct sym_entry *sa;
if (wa != wb)
return wa - wb;
+ /* sort by "linker script provide" type */
+ wa = may_be_linker_script_provide_symbol(sa);
+ wb = may_be_linker_script_provide_symbol(sb);
+ if (wa != wb)
+ return wa - wb;
+
+ /* sort by the number of prefix underscores */
+ wa = prefix_underscores_count((const char *)sa->sym + 1);
+ wb = prefix_underscores_count((const char *)sb->sym + 1);
+ if (wa != wb)
+ return wa - wb;
+
/* sort by initial order, so that other symbols are left undisturbed */
return sa->start_pos - sb->start_pos;
}
projects / linux-2.6-omap-h63xx.git / commitdiff