data-sheet/users manual to find out the complete list.
+GPIOLIB
+-------
+
+ With the event of the GPIOLIB in drivers/gpio, support for some
+ of the GPIO functions such as reading and writing a pin will
+ be removed in favour of this common access method.
+
+ Once all the extant drivers have been converted, the functions
+ listed below will be removed (they may be marked as __deprecated
+ in the near future).
+
+ - s3c2410_gpio_getpin
+ - s3c2410_gpio_setpin
+
+
Headers
-------
The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
- S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
+ S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported.
+
+ Support for the S3C2400 and S3C24A0 series are in progress.
- Support for the S3C2400 series is in progress.
Configuration
-------------
Register, kernel and platform data definitions are held in the
arch/arm/mach-s3c2410 directory./include/mach
+arch/arm/plat-s3c24xx:
+
+ Files in here are either common to all the s3c24xx family,
+ or are common to only some of them with names to indicate this
+ status. The files that are not common to all are generally named
+ with the initial cpu they support in the series to ensure a short
+ name without any possibility of confusion with newer devices.
+
+ As an example, initially s3c244x would cover s3c2440 and s3c2442, but
+ with the s3c2443 which does not share many of the same drivers in
+ this directory, the name becomes invalid. We stick to s3c2440-<x>
+ to indicate a driver that is s3c2440 and s3c2442 compatible.
+
+ This does mean that to find the status of any given SoC, a number
+ of directories may need to be searched.
+
Machines
--------
For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt
+SD/MMC
+------
+
+ The SD/MMC hardware pre S3C2443 is supported in the current
+ kernel, the driver is drivers/mmc/host/s3cmci.c and supports
+ 1 and 4 bit SD or MMC cards.
+
+ The SDIO behaviour of this driver has not been fully tested. There is no
+ current support for hardware SDIO interrupts.
+
+
Serial
------
The core contains support for manipulating the GPIO, see the
documentation in GPIO.txt in the same directory as this file.
+ Newer kernels carry GPIOLIB, and support is being moved towards
+ this with some of the older support in line to be removed.
+
Clock Management
----------------
git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
+ - Note that it is highly important to install the mke2fs.conf file
+ that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
+ you have edited the /etc/mke2fs.conf file installed on your system,
+ you will need to merge your changes with the version from e2fsprogs
+ 1.41.x.
+
- Create a new filesystem using the ext4dev filesystem type:
# mke2fs -t ext4dev /dev/hda1
it possible to fit quite a lot of data to the flash.
Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts.
-It does not need stuff like ckfs.ext2. UBIFS automatically replays its
+It does not need stuff like fsck.ext2. UBIFS automatically replays its
journal and recovers from crashes, ensuring that the on-flash data
structures are consistent.
Kernel driver ibmaem
======================
+This driver talks to the IBM Systems Director Active Energy Manager, known
+henceforth as AEM.
+
Supported systems:
- * Any recent IBM System X server with Active Energy Manager support.
+ * Any recent IBM System X server with AEM support.
This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
driver ("ipmi-si") needs to be loaded for this driver to do anything.
Description
-----------
-This driver implements sensor reading support for the energy and power
-meters available on various IBM System X hardware through the BMC. All
-sensor banks will be exported as platform devices; this driver can talk
-to both v1 and v2 interfaces. This driver is completely separate from the
-older ibmpex driver.
+This driver implements sensor reading support for the energy and power meters
+available on various IBM System X hardware through the BMC. All sensor banks
+will be exported as platform devices; this driver can talk to both v1 and v2
+interfaces. This driver is completely separate from the older ibmpex driver.
-The v1 AEM interface has a simple set of features to monitor energy use.
-There is a register that displays an estimate of raw energy consumption
-since the last BMC reset, and a power sensor that returns average power
-use over a configurable interval.
+The v1 AEM interface has a simple set of features to monitor energy use. There
+is a register that displays an estimate of raw energy consumption since the
+last BMC reset, and a power sensor that returns average power use over a
+configurable interval.
-The v2 AEM interface is a bit more sophisticated, being able to present
-a wider range of energy and power use registers, the power cap as
-set by the AEM software, and temperature sensors.
+The v2 AEM interface is a bit more sophisticated, being able to present a wider
+range of energy and power use registers, the power cap as set by the AEM
+software, and temperature sensors.
Special Features
----------------
-The "power_cap" value displays the current system power cap, as set by
-the Active Energy Manager software. Setting the power cap from the host
-is not currently supported.
+The "power_cap" value displays the current system power cap, as set by the AEM
+software. Setting the power cap from the host is not currently supported.
fork. So if you have any comments or updates for this file, please try
to update the original English file first.
-Last Updated: 2007/11/16
+Last Updated: 2008/08/21
==================================
これは、
-linux-2.6.24/Documentation/HOWTO
+linux-2.6.27/Documentation/HOWTO
の和訳です。
翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/11/10
+翻訳日： 2008/8/5
翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
校正者： 松倉さん <nbh--mats at nifty dot com>
小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
に安定した状態にあると判断したときにリリースされます。目標は毎週新
しい -rc カーネルをリリースすることです。
- - 以下の URL で各 -rc リリースに存在する既知の後戻り問題のリスト
- が追跡されます-
- http://kernelnewbies.org/known_regressions
-
- このプロセスはカーネルが 「準備ができた」と考えられるまで継続しま
す。このプロセスはだいたい 6週間継続します。
+ - 各リリースでの既知の後戻り問題(regression: このリリースの中で新規
+ に作り込まれた問題を指す) はその都度 Linux-kernel メーリングリスト
+ に投稿されます。ゴールとしては、カーネルが 「準備ができた」と宣言
+ する前にこのリストの長さをゼロに減らすことですが、現実には、数個の
+ 後戻り問題がリリース時にたびたび残ってしまいます。
+
Andrew Morton が Linux-kernel メーリングリストにカーネルリリースについ
て書いたことをここで言っておくことは価値があります-
「カーネルがいつリリースされるかは誰も知りません。なぜなら、これは現
2.6.x.y -stable カーネルツリー
---------------------------
-バージョンに4つ目の数字がついたカーネルは -stable カーネルです。これに
-ã\81¯ã\80\812.6.x ã\82«ã\83¼ã\83\8dã\83«ã\81§è¦\8bã\81¤ã\81\8bã\81£ã\81\9fã\82»ã\82ã\83¥ã\83ªã\83\86ã\82£å\95\8fé¡\8cã\82\84é\87\8d大ã\81ªå¾\8cæ\88»ã\82\8aã\81«å¯¾ã\81\99ã\82\8bæ¯\94
-較的小さい重要な修正が含まれます。
+バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
+ã\81\93ã\82\8cã\81«ã\81¯ã\80\812.6.x ã\82«ã\83¼ã\83\8dã\83«ã\81§è¦\8bã\81¤ã\81\8bã\81£ã\81\9fã\82»ã\82ã\83¥ã\83ªã\83\86ã\82£å\95\8fé¡\8cã\82\84é\87\8d大ã\81ªå¾\8cæ\88»ã\82\8aã\81«å¯¾
+する比較的小さい重要な修正が含まれます。
これは、開発/実験的バージョンのテストに協力することに興味が無く、
最新の安定したカーネルを使いたいユーザに推奨するブランチです。
-もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x
-が最新の安定版カーネルです。
+もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
+最新の安定版カーネルです。
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、だ
-いたい隔週でリリースされています。
+2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
+た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
+の場合はこれに対してだいたいの場合、すぐにリリースがされます。
カーネルツリーに入っている、Documentation/stable_kernel_rules.txt ファ
イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
メインラインへ入れるように Linus にプッシュします。
メインカーネルツリーに含めるために Linus に送る前に、すべての新しいパッ
-チが -mm ツリーでテストされることが強く推奨されます。
+チが -mm ツリーでテストされることが強く推奨されています。マージウィン
+ドウが開く前に -mm ツリーに現れなかったパッチはメインラインにマージさ
+れることは困難になります。
これらのカーネルは安定して動作すべきシステムとして使うのには適切ではあ
りませんし、カーネルブランチの中でももっとも動作にリスクが高いものです。
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+ - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+ - x86, Ingo Molnar <mingo@elte.hu>
+ git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
quilt ツリー-
- - USB, PCI ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
+ - USB, ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
- - x86-64 と i386 の仲間 Andi Kleen <ak@suse.de>
その他のカーネルツリーは http://git.kernel.org/ と MAINTAINERS ファ
イルに一覧表があります。
bugzilla.kernel.org は Linux カーネル開発者がカーネルのバグを追跡する
場所です。ユーザは見つけたバグの全てをこのツールで報告すべきです。
どう kernel bugzilla を使うかの詳細は、以下を参照してください-
- http://test.kernel.org/bugzilla/faq.html
-
+ http://bugzilla.kernel.org/page.cgi?id=faq.html
メインカーネルソースディレクトリにあるファイル REPORTING-BUGS はカーネ
ルバグらしいものについてどうレポートするかの良いテンプレートであり、問
題の追跡を助けるためにカーネル開発者にとってどんな情報が必要なのかの詳
細が書かれています。
+バグレポートの管理
+-------------------
+
+あなたのハッキングのスキルを訓練する最高の方法のひとつに、他人がレポー
+トしたバグを修正することがあります。あなたがカーネルをより安定化させる
+こに寄与するということだけでなく、あなたは 現実の問題を修正することを
+学び、自分のスキルも強化でき、また他の開発者があなたの存在に気がつき
+ます。バグを修正することは、多くの開発者の中から自分が功績をあげる最善
+の道です、なぜなら多くの人は他人のバグの修正に時間を浪費することを好ま
+ないからです。
+
+すでにレポートされたバグのために仕事をするためには、
+http://bugzilla.kernel.org に行ってください。もし今後のバグレポートに
+ついてアドバイスを受けたいのであれば、bugme-new メーリングリスト(新し
+いバグレポートだけがここにメールされる) または bugme-janitor メーリン
+グリスト(bugzilla の変更毎にここにメールされる)を購読できます。
+
+ http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+ http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+
メーリングリスト
-------------
--- /dev/null
+NOTE:
+This is a version of Documentation/SubmitChecklist into Japanese.
+This document is maintained by Takenori Nagano <t-nagano@ah.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2008/07/14
+==================================
+これは、
+linux-2.6.26/Documentation/SubmitChecklist の和訳です。
+
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2008/07/14
+翻訳者： Takenori Nagano <t-nagano at ah dot jp dot nec dot com>
+校正者： Masanori Kobayashi さん <zap03216 at nifty dot ne dot jp>
+==================================
+
+
+Linux カーネルパッチ投稿者向けチェックリスト
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+本書では、パッチをより素早く取り込んでもらいたい開発者が実践すべき基本的な事柄
+をいくつか紹介します。ここにある全ての事柄は、Documentation/SubmittingPatches
+などのLinuxカーネルパッチ投稿に際しての心得を補足するものです。
+
+ 1: 妥当なCONFIGオプションや変更されたCONFIGオプション、つまり =y, =m, =n
+ 全てで正しくビルドできることを確認してください。その際、gcc及びリンカが
+ warningやerrorを出していないことも確認してください。
+
+ 2: allnoconfig, allmodconfig オプションを用いて正しくビルドできることを
+ 確認してください。
+
+ 3: 手許のクロスコンパイルツールやOSDLのPLMのようなものを用いて、複数の
+ アーキテクチャにおいても正しくビルドできることを確認してください。
+
+ 4: 64bit長の'unsigned long'を使用しているppc64は、クロスコンパイルでの
+ チェックに適当なアーキテクチャです。
+
+ 5: カーネルコーディングスタイルに準拠しているかどうか確認してください(!)
+
+ 6: CONFIGオプションの追加・変更をした場合には、CONFIGメニューが壊れていない
+ ことを確認してください。
+
+ 7: 新しくKconfigのオプションを追加する際には、必ずそのhelpも記述してください。
+
+ 8: 適切なKconfigの依存関係を考えながら慎重にチェックしてください。
+ ただし、この作業はマシンを使ったテストできちんと行うのがとても困難です。
+ うまくやるには、自分の頭で考えることです。
+
+ 9: sparseを利用してちゃんとしたコードチェックをしてください。
+
+10: 'make checkstack' と 'make namespacecheck' を利用し、問題が発見されたら
+ 修正してください。'make checkstack' は明示的に問題を示しませんが、どれか
+ １つの関数が512バイトより大きいスタックを使っていれば、修正すべき候補と
+ なります。
+
+11: グローバルなkernel API を説明する kernel-doc をソースの中に含めてください。
+ ( staticな関数においては必須ではありませんが、含めてもらっても結構です )
+ そして、'make htmldocs' もしくは 'make mandocs' を利用して追記した
+ ドキュメントのチェックを行い、問題が見つかった場合には修正を行ってください。
+
+12: CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, CONFIG_DEBUG_SLAB,
+ CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, CONFIG_DEBUG_SPINLOCK,
+ CONFIG_DEBUG_SPINLOCK_SLEEP これら全てを同時に有効にして動作確認を
+ 行ってください。
+
+13: CONFIG_SMP, CONFIG_PREEMPT を有効にした場合と無効にした場合の両方で
+ ビルドした上、動作確認を行ってください。
+
+14: もしパッチがディスクのI/O性能などに影響を与えるようであれば、
+ 'CONFIG_LBD'オプションを有効にした場合と無効にした場合の両方で
+ テストを実施してみてください。
+
+15: lockdepの機能を全て有効にした上で、全てのコードパスを評価してください。
+
+16: /proc に新しいエントリを追加した場合には、Documentation/ 配下に
+ 必ずドキュメントを追加してください。
+
+17: 新しいブートパラメータを追加した場合には、
+ 必ずDocumentation/kernel-parameters.txt に説明を追加してください。
+
+18: 新しくmoduleにパラメータを追加した場合には、MODULE_PARM_DESC()を
+ 利用して必ずその説明を記述してください。
+
+19: 新しいuserspaceインタフェースを作成した場合には、Documentation/ABI/ に
+ Documentation/ABI/README を参考にして必ずドキュメントを追加してください。
+
+20: 'make headers_check'を実行して全く問題がないことを確認してください。
+
+21: 少なくともslabアロケーションとpageアロケーションに失敗した場合の
+ 挙動について、fault-injectionを利用して確認してください。
+ Documentation/fault-injection/ を参照してください。
+
+ 追加したコードがかなりの量であったならば、サブシステム特有の
+ fault-injectionを追加したほうが良いかもしれません。
+
+22: 新たに追加したコードは、`gcc -W'でコンパイルしてください。
+ このオプションは大量の不要なメッセージを出力しますが、
+ "warning: comparison between signed and unsigned" のようなメッセージは、
+ バグを見つけるのに役に立ちます。
+
+23: 投稿したパッチが -mm パッチセットにマージされた後、全ての既存のパッチや
+ VM, VFS およびその他のサブシステムに関する様々な変更と、現時点でも共存
+ できることを確認するテストを行ってください。
no delay (0).
Format: integer
+ bootmem_debug [KNL] Enable bootmem allocator debug messages.
+
bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
bttv.radio= Most important insmod options are available as
kernel args too.
* [no]ncq: Turn on or off NCQ.
+ * nohrst, nosrst, norst: suppress hard, soft
+ and both resets.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
when possible) the overall transmitter rfkill state, not of a particular rfkill
line.
+5. During suspend, the rfkill class will attempt to soft-block the radio
+through a call to rfkill->toggle_radio, and will try to restore its previous
+state during resume. After a rfkill class is suspended, it will *not* call
+rfkill->toggle_radio until it is resumed.
+
Example of a WLAN wireless driver connected to the rfkill subsystem:
--------------------------------------------------------------------
+
+1 Release Date : Thur.July. 24 11:41:51 PST 2008 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Sumant Patro
+ Bo Yang
+
+2 Current Version : 00.00.04.01
+3 Older Version : 00.00.03.22
+
+1. Add the new controller (0078, 0079) support to the driver
+ Those controllers are LSI's next generatation(gen2) SAS controllers.
+
+1 Release Date : Mon.June. 23 10:12:45 PST 2008 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Sumant Patro
+ Bo Yang
+
+2 Current Version : 00.00.03.22
+3 Older Version : 00.00.03.20
+
+1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
+2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
+
1 Release Date : Mon. March 10 11:02:31 PDT 2008 -
(emaild-id:megaraidlinux@lsi.com)
Sumant Patro
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-ice1712
------------------
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-pcsp
-----------------
Module snd-virtuoso
-------------------
- Module for sound cards based on the Asus AV200 chip, i.e.,
- Xonar D2 and Xonar D2X.
+ Module for sound cards based on the Asus AV100/AV200 chips,
+ i.e., Xonar D1, DX, D2 and D2X.
This module supports autoprobe and multiple cards.
- Power management is _not_ supported.
-
Module snd-vx222
----------------
process that are located on the from nodes to the destination nodes.
Page migration functions are provided by the numactl package by Andi Kleen
(a version later than 0.9.3 is required. Get it from
-ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which
-provides an interface similar to other numa functionality for page migration.
-cat /proc/<pid>/numa_maps allows an easy review of where the pages of
-a process are located. See also the numa_maps manpage in the numactl package.
+ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma
+which provides an interface similar to other numa functionality for page
+migration. cat /proc/<pid>/numa_maps allows an easy review of where the
+pages of a process are located. See also the numa_maps documentation in the
+proc(5) man page.
Manual migration is useful if for example the scheduler has relocated
a process to a processor on a distant node. A batch scheduler or an
L: linux-aio@kvack.org
S: Supported
-ABIT UGURU HARDWARE MONITOR DRIVER
+ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
P: Hans de Goede
M: j.w.r.degoede@hhs.nl
L: lm-sensors@lm-sensors.org
S: Maintained
+ABIT UGURU 3 HARDWARE MONITOR DRIVER
+P: Alistair John Strachan
+M: alistair@devzero.co.uk
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
ACENIC DRIVER
P: Jes Sorensen
M: jes@trained-monkey.org
L: linux-mtd@lists.infradead.org
S: Maintained
-BLUETOOTH SUBSYSTEM
+BLUETOOTH DRIVERS
P: Marcel Holtmann
M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
L: linux-bluetooth@vger.kernel.org
-W: http://bluez.sf.net
-W: http://www.bluez.org
-W: http://www.holtmann.org/linux/bluetooth/
-T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
-S: Maintained
-
-BLUETOOTH RFCOMM LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH BNEP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH CMTP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HIDP LAYER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI UART DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH HCI USB DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
-S: Maintained
-
-BLUETOOTH HCI BCM203X DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BPA10X DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
+W: http://www.bluez.org/
S: Maintained
-BLUETOOTH HCI BFUSB DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI DTL1 DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BLUECARD DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BT3C DRIVER
-P: Marcel Holtmann
-M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI BTUART DRIVER
+BLUETOOTH SUBSYSTEM
P: Marcel Holtmann
M: marcel@holtmann.org
-S: Maintained
-
-BLUETOOTH HCI VHCI DRIVER
-P: Maxim Krasnyansky
-M: maxk@qualcomm.com
+L: linux-bluetooth@vger.kernel.org
+W: http://www.bluez.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
S: Maintained
BONDING DRIVER
W: http://linux-visws.sf.net
S: Maintained for 2.6.
+SGI GRU DRIVER
+P: Jack Steiner
+M: steiner@sgi.com
+S: Maintained
+
+SGI XP/XPC/XPNET DRIVER
+P: Dean Nelson
+M: dcn@sgi.com
+S: Maintained
+
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
P: Vincent Sanders
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Rotary Wombat
# *DOCUMENTATION*
-piggy.gz
font.c
+piggy.gz
+vmlinux.lds
}
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
if ((dir == DMA_TO_DEVICE) ||
(dir == DMA_BIDIRECTIONAL)) {
BUG_ON(buf->size != size);
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
}
}
-static inline void
-sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction dir)
{
struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
struct safe_buffer *buf = NULL;
*/
dev_dbg(dev,
- "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n",
- __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
- buf->safe, (void *) buf->safe_dma_addr);
+ "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
DO_STATS ( device_info->bounce_count++ );
* No need to sync the safe buffer - it was allocated
* via the coherent allocators.
*/
+ return 0;
} else {
- dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir);
+ return 1;
}
}
}
}
-void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+ __func__, dma_addr, offset, size, dir);
- sync_single(dev, dma_addr, size, dir);
+ if (sync_single(dev, dma_addr, offset + size, dir))
+ dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
-void
-dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
+ dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n",
+ __func__, dma_addr, offset, size, dir);
- sync_single(dev, dma_addr, size, dir);
+ if (sync_single(dev, dma_addr, offset + size, dir))
+ dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir);
}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
EXPORT_SYMBOL(dma_unmap_single);
EXPORT_SYMBOL(dma_map_sg);
EXPORT_SYMBOL(dma_unmap_sg);
-EXPORT_SYMBOL(dma_sync_single_for_cpu);
-EXPORT_SYMBOL(dma_sync_single_for_device);
EXPORT_SYMBOL(dma_sync_sg_for_cpu);
EXPORT_SYMBOL(dma_sync_sg_for_device);
EXPORT_SYMBOL(dmabounce_register_dev);
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_RTC_DRV_RS5C372=y
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
+CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
-# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_S35390A=y
#
# SPI RTC drivers
#ifdef __KERNEL__
-#include <linux/mm.h> /* need struct page */
-
+#include <linux/mm_types.h>
#include <linux/scatterlist.h>
#include <asm-generic/dma-coherent.h>
+#include <asm/memory.h>
+
+/*
+ * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
+ * used internally by the DMA-mapping API to provide DMA addresses. They
+ * must not be used by drivers.
+ */
+#ifndef __arch_page_to_dma
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+ return (void *)__bus_to_virt(addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+ return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
+}
+#else
+static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+{
+ return __arch_page_to_dma(dev, page);
+}
+
+static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
+{
+ return __arch_dma_to_virt(dev, addr);
+}
+
+static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
+{
+ return __arch_virt_to_dma(dev, addr);
+}
+#endif
/*
* DMA-consistent mapping functions. These allocate/free a region of
if (!arch_is_coherent())
dma_cache_maint(cpu_addr, size, dir);
- return virt_to_dma(dev, (unsigned long)cpu_addr);
+ return virt_to_dma(dev, cpu_addr);
}
#else
extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
unsigned long offset, size_t size,
enum dma_data_direction dir)
{
- return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
+ return dma_map_single(dev, page_address(page) + offset, size, dir);
}
/**
dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
enum dma_data_direction dir)
{
- dma_unmap_single(dev, handle, size, (int)dir);
+ dma_unmap_single(dev, handle, size, dir);
}
/**
/**
- * dma_sync_single_for_cpu
+ * dma_sync_single_range_for_cpu
* @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
* @handle: DMA address of buffer
- * @size: size of buffer to map
- * @dir: DMA transfer direction
+ * @offset: offset of region to start sync
+ * @size: size of region to sync
+ * @dir: DMA transfer direction (same as passed to dma_map_single)
*
* Make physical memory consistent for a single streaming mode DMA
* translation after a transfer.
*/
#ifndef CONFIG_DMABOUNCE
static inline void
-dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
if (!arch_is_coherent())
- dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+ dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
static inline void
-dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
{
if (!arch_is_coherent())
- dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+ dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir);
}
#else
-extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
-extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction);
#endif
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_cpu(dev, handle, 0, size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_sync_single_range_for_device(dev, handle, 0, size, dir);
+}
+
/**
* dma_sync_sg_for_cpu
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
#define KEXEC_ARCH KEXEC_ARCH_ARM
#define arch_adjust_zones(node,size,holes) do { } while (0)
#endif
+/*
+ * Amount of memory reserved for the vmalloc() area, and minimum
+ * address for vmalloc mappings.
+ */
+extern unsigned long vmalloc_reserve;
+
+#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve)
+
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
*/
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
-/*
- * Optional device DMA address remapping. Do _not_ use directly!
- * We should really eliminate virt_to_bus() here - it's deprecated.
- */
-#ifndef __arch_page_to_dma
-#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
-#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr))
-#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
-#else
-#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page))
-#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr))
-#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr))
-#endif
-
/*
* Optional coherency support. Currently used only by selected
* Intel XSC3-based systems.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARM_MTD_XIP_H__
static inline void prefetch(const void *ptr)
{
__asm__ __volatile__(
- "pld\t%0"
+ "pld\t%a0"
:
- : "o" (*(char *)ptr)
+ : "p" (ptr)
: "cc");
}
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
* fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ * v7wbi - identical to v6wbi
*/
#undef _TLB
#undef MULTI_TLB
v4wbi_possible_flags | \
fr_possible_flags | \
v4wb_possible_flags | \
- v6wbi_possible_flags)
+ v6wbi_possible_flags | \
+ v7wbi_possible_flags)
#define always_tlb_flags (v3_always_flags & \
v4_always_flags & \
v4wbi_always_flags & \
fr_always_flags & \
v4wb_always_flags & \
- v6wbi_always_flags)
+ v6wbi_always_flags & \
+ v7wbi_always_flags)
#define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
#define __NR_fallocate (__NR_SYSCALL_BASE+352)
#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353)
#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354)
+#define __NR_signalfd4 (__NR_SYSCALL_BASE+355)
+#define __NR_eventfd2 (__NR_SYSCALL_BASE+356)
+#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357)
+#define __NR_dup3 (__NR_SYSCALL_BASE+358)
+#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
+#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
/*
* The following SWIs are ARM private.
--- /dev/null
+vmlinux.lds
/* 250 */ CALL(sys_epoll_create)
CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl))
CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait))
- CALL(sys_remap_file_pages)
+ CALL(sys_remap_file_pages)
CALL(sys_ni_syscall) /* sys_set_thread_area */
/* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */
- CALL(sys_set_tid_address)
+ CALL(sys_set_tid_address)
CALL(sys_timer_create)
CALL(sys_timer_settime)
CALL(sys_timer_gettime)
CALL(sys_fallocate)
CALL(sys_timerfd_settime)
CALL(sys_timerfd_gettime)
+/* 355 */ CALL(sys_signalfd4)
+ CALL(sys_eventfd2)
+ CALL(sys_epoll_create1)
+ CALL(sys_dup3)
+ CALL(sys_pipe2)
+/* 360 */ CALL(sys_inotify_init1)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
flush_icache_range((unsigned long) reboot_code_buffer,
- (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
cpu_proc_fin();
unsigned int elf_hwcap;
EXPORT_SYMBOL(elf_hwcap);
+unsigned long __initdata vmalloc_reserve = 128 << 20;
+
#ifdef MULTI_CPU
struct processor processor;
}
__early_param("mem=", early_mem);
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the vmalloc
+ * area - the default is 128m.
+ */
+static void __init early_vmalloc(char **arg)
+{
+ vmalloc_reserve = memparse(*arg, arg);
+}
+__early_param("vmalloc=", early_vmalloc);
+
/*
* Initial parsing of the command line.
*/
spin_unlock_irqrestore(&undef_lock, flags);
}
+static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+{
+ struct undef_hook *hook;
+ unsigned long flags;
+ int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL;
+
+ spin_lock_irqsave(&undef_lock, flags);
+ list_for_each_entry(hook, &undef_hook, node)
+ if ((instr & hook->instr_mask) == hook->instr_val &&
+ (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val)
+ fn = hook->fn;
+ spin_unlock_irqrestore(&undef_lock, flags);
+
+ return fn ? fn(regs, instr) : 1;
+}
+
asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
{
unsigned int correction = thumb_mode(regs) ? 2 : 4;
unsigned int instr;
- struct undef_hook *hook;
siginfo_t info;
void __user *pc;
- unsigned long flags;
/*
* According to the ARM ARM, PC is 2 or 4 bytes ahead,
}
#endif
- spin_lock_irqsave(&undef_lock, flags);
- list_for_each_entry(hook, &undef_hook, node) {
- if ((instr & hook->instr_mask) == hook->instr_val &&
- (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) {
- if (hook->fn(regs, instr) == 0) {
- spin_unlock_irqrestore(&undef_lock, flags);
- return;
- }
- }
- }
- spin_unlock_irqrestore(&undef_lock, flags);
+ if (call_undef_hook(regs, instr) == 0)
+ return;
#ifdef CONFIG_DEBUG_USER
if (user_debug & UDBG_UNDEFINED) {
static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
+ if (dev->irq >= 255)
+ return -1; /* not a valid interrupt. */
+
if (dev->irq >= 128)
return dev->irq & 0x1f;
*
* Copyright (C) 2001-2002 Deep Blue Solutions Ltd.
*
- * $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
ret = amba_device_register(d, &dev->resource);
if (ret) {
- dev_err(&d->dev, "unable to register device: %d\n");
+ dev_err(&d->dev, "unable to register device: %d\n", ret);
kfree(d);
}
}
* NOTE: This is a multi-hosted header file for use with uHAL and
* supported debuggers.
*
- * $Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
- *
* ***********************************************************************/
#ifndef __address_h
static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
{
- I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+ I2C_BOARD_INFO("isl1208", 0x6f),
},
};
{
DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
- int i;
ixp4xx_sys_init();
f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
if (f) {
#ifdef __ARMEB__
+ int i;
for (i = 0; i < 6; i++) {
fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
#include <asm/page.h>
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
}
+/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+static struct orion_spi_info kirkwood_spi_plat_data = {
+ .tclk = KIRKWOOD_TCLK,
+};
+
+static struct resource kirkwood_spi_resources[] = {
+ {
+ .start = SPI_PHYS_BASE,
+ .end = SPI_PHYS_BASE + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_spi = {
+ .name = "orion_spi",
+ .id = 0,
+ .resource = kirkwood_spi_resources,
+ .dev = {
+ .platform_data = &kirkwood_spi_plat_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_spi_resources),
+};
+
+void __init kirkwood_spi_init()
+{
+ platform_device_register(&kirkwood_spi);
+}
+
+
/*****************************************************************************
* UART0
****************************************************************************/
}
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
+ .dram = &kirkwood_mbus_dram_info,
+};
+
+static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK;
+
+
+/*****************************************************************************
+ * XOR0
+ ****************************************************************************/
+static struct resource kirkwood_xor0_shared_resources[] = {
+ {
+ .name = "xor 0 low",
+ .start = XOR0_PHYS_BASE,
+ .end = XOR0_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 0 high",
+ .start = XOR0_HIGH_PHYS_BASE,
+ .end = XOR0_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_xor0_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .dev = {
+ .platform_data = &kirkwood_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_xor0_shared_resources),
+ .resource = kirkwood_xor0_shared_resources,
+};
+
+static struct resource kirkwood_xor00_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_00,
+ .end = IRQ_KIRKWOOD_XOR_00,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor00_data = {
+ .shared = &kirkwood_xor0_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor00_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(kirkwood_xor00_resources),
+ .resource = kirkwood_xor00_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor00_data,
+ },
+};
+
+static struct resource kirkwood_xor01_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_01,
+ .end = IRQ_KIRKWOOD_XOR_01,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor01_data = {
+ .shared = &kirkwood_xor0_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor01_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(kirkwood_xor01_resources),
+ .resource = kirkwood_xor01_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor01_data,
+ },
+};
+
+void __init kirkwood_xor0_init(void)
+{
+ platform_device_register(&kirkwood_xor0_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
+ platform_device_register(&kirkwood_xor00_channel);
+
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
+ platform_device_register(&kirkwood_xor01_channel);
+}
+
+
+/*****************************************************************************
+ * XOR1
+ ****************************************************************************/
+static struct resource kirkwood_xor1_shared_resources[] = {
+ {
+ .name = "xor 1 low",
+ .start = XOR1_PHYS_BASE,
+ .end = XOR1_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor 1 high",
+ .start = XOR1_HIGH_PHYS_BASE,
+ .end = XOR1_HIGH_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device kirkwood_xor1_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 1,
+ .dev = {
+ .platform_data = &kirkwood_xor_shared_data,
+ },
+ .num_resources = ARRAY_SIZE(kirkwood_xor1_shared_resources),
+ .resource = kirkwood_xor1_shared_resources,
+};
+
+static struct resource kirkwood_xor10_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_10,
+ .end = IRQ_KIRKWOOD_XOR_10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor10_data = {
+ .shared = &kirkwood_xor1_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor10_channel = {
+ .name = MV_XOR_NAME,
+ .id = 2,
+ .num_resources = ARRAY_SIZE(kirkwood_xor10_resources),
+ .resource = kirkwood_xor10_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor10_data,
+ },
+};
+
+static struct resource kirkwood_xor11_resources[] = {
+ [0] = {
+ .start = IRQ_KIRKWOOD_XOR_11,
+ .end = IRQ_KIRKWOOD_XOR_11,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data kirkwood_xor11_data = {
+ .shared = &kirkwood_xor1_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device kirkwood_xor11_channel = {
+ .name = MV_XOR_NAME,
+ .id = 3,
+ .num_resources = ARRAY_SIZE(kirkwood_xor11_resources),
+ .resource = kirkwood_xor11_resources,
+ .dev = {
+ .dma_mask = &kirkwood_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&kirkwood_xor11_data,
+ },
+};
+
+void __init kirkwood_xor1_init(void)
+{
+ platform_device_register(&kirkwood_xor1_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
+ platform_device_register(&kirkwood_xor10_channel);
+
+ dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
+ dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
+ platform_device_register(&kirkwood_xor11_channel);
+}
+
+
/*****************************************************************************
* Time handling
****************************************************************************/
void kirkwood_pcie_init(void);
void kirkwood_rtc_init(void);
void kirkwood_sata_init(struct mv_sata_platform_data *sata_data);
+void kirkwood_spi_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
extern struct sys_timer kirkwood_timer;
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800)
+#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800)
+#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900)
+#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900)
+#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00)
+#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00)
+#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00)
+#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00)
+
#define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000)
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init kirkwood_init_irq(void)
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
#include <linux/timer.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
.n_ports = 2,
};
+static const struct flash_platform_data rd88F6192_spi_slave_data = {
+ .type = "m25p128",
+};
+
+static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &rd88F6192_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 20000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
static void __init rd88f6192_init(void)
{
/*
kirkwood_ge00_init(&rd88f6192_ge00_data);
kirkwood_rtc_init();
kirkwood_sata_init(&rd88f6192_sata_data);
+ spi_register_board_info(rd88F6192_spi_slave_info,
+ ARRAY_SIZE(rd88F6192_spi_slave_info));
+ kirkwood_spi_init();
kirkwood_uart0_init();
+ kirkwood_xor0_init();
+ kirkwood_xor1_init();
}
static int __init rd88f6192_pci_init(void)
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
static struct mtd_partition rd88f6281_nand_parts[] = {
/* ssp.h
- $Id$
written by Marc Singer
6 Dec 2004
/* lcd-panel.h
- $Id$
written by Marc Singer
18 Jul 2005
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/loki.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init loki_init_irq(void)
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/cache-feroceon-l2.h>
+#include <plat/ehci-orion.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
#include <linux/init.h>
#include <linux/pci.h>
#include <mach/mv78xx0.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
void __init mv78xx0_init_irq(void)
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
struct pcie_port {
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/ehci-orion.h>
-#include <asm/plat-orion/orion_nand.h>
-#include <asm/plat-orion/time.h>
+#include <plat/ehci-orion.h>
+#include <plat/mv_xor.h>
+#include <plat/orion_nand.h>
+#include <plat/time.h>
#include "common.h"
/*****************************************************************************
}
+/*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+static struct resource orion5x_xor_shared_resources[] = {
+ {
+ .name = "xor low",
+ .start = ORION5X_XOR_PHYS_BASE,
+ .end = ORION5X_XOR_PHYS_BASE + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "xor high",
+ .start = ORION5X_XOR_PHYS_BASE + 0x200,
+ .end = ORION5X_XOR_PHYS_BASE + 0x2ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device orion5x_xor_shared = {
+ .name = MV_XOR_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources),
+ .resource = orion5x_xor_shared_resources,
+};
+
+static u64 orion5x_xor_dmamask = DMA_32BIT_MASK;
+
+static struct resource orion5x_xor0_resources[] = {
+ [0] = {
+ .start = IRQ_ORION5X_XOR0,
+ .end = IRQ_ORION5X_XOR0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data orion5x_xor0_data = {
+ .shared = &orion5x_xor_shared,
+ .hw_id = 0,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor0_channel = {
+ .name = MV_XOR_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(orion5x_xor0_resources),
+ .resource = orion5x_xor0_resources,
+ .dev = {
+ .dma_mask = &orion5x_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&orion5x_xor0_data,
+ },
+};
+
+static struct resource orion5x_xor1_resources[] = {
+ [0] = {
+ .start = IRQ_ORION5X_XOR1,
+ .end = IRQ_ORION5X_XOR1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mv_xor_platform_data orion5x_xor1_data = {
+ .shared = &orion5x_xor_shared,
+ .hw_id = 1,
+ .pool_size = PAGE_SIZE,
+};
+
+static struct platform_device orion5x_xor1_channel = {
+ .name = MV_XOR_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(orion5x_xor1_resources),
+ .resource = orion5x_xor1_resources,
+ .dev = {
+ .dma_mask = &orion5x_xor_dmamask,
+ .coherent_dma_mask = DMA_64BIT_MASK,
+ .platform_data = (void *)&orion5x_xor1_data,
+ },
+};
+
+void __init orion5x_xor_init(void)
+{
+ platform_device_register(&orion5x_xor_shared);
+
+ /*
+ * two engines can't do memset simultaneously, this limitation
+ * satisfied by removing memset support from one of the engines.
+ */
+ dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask);
+ dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask);
+ platform_device_register(&orion5x_xor0_channel);
+
+ dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask);
+ dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask);
+ dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask);
+ platform_device_register(&orion5x_xor1_channel);
+}
+
+
/*****************************************************************************
* Time handling
****************************************************************************/
*dev_name = "MV88F5281-D2";
} else if (*rev == MV88F5281_REV_D1) {
*dev_name = "MV88F5281-D1";
+ } else if (*rev == MV88F5281_REV_D0) {
+ *dev_name = "MV88F5281-D0";
} else {
*dev_name = "MV88F5281-Rev-Unsupported";
}
* Setup Orion address map
*/
orion5x_setup_cpu_mbus_bridge();
+
+ /*
+ * Don't issue "Wait for Interrupt" instruction if we are
+ * running on D0 5281 silicon.
+ */
+ if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+ printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+ disable_hlt();
+ }
}
/*
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
/*
* PCIe/PCI functions.
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
#define MV88F5182_REV_A2 2
/* Orion-2 (88F5281) */
#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D0 4
#define MV88F5281_REV_D1 5
#define MV88F5281_REV_D2 6
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
+#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
+#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
+#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x))
+
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
#include <asm/gpio.h>
#include <asm/io.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
#include "common.h"
/*****************************************************************************
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
orion5x_sata_init(&kurobox_pro_sata_data);
orion5x_uart0_init();
orion5x_uart1_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
KUROBOX_PRO_NOR_BOOT_SIZE);
orion5x_i2c_init();
orion5x_sata_init(&mss2_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE);
platform_device_register(&mss2_nor_flash);
orion5x_i2c_init();
orion5x_sata_init(&mv2120_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE);
platform_device_register(&mv2120_nor_flash);
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
#include "common.h"
/*****************************************************************************
orion5x_i2c_init();
orion5x_sata_init(&rd88f5182_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
RD88F5182_NOR_BOOT_SIZE);
static struct gpio_keys_button qnap_ts209_buttons[] = {
{
- .code = KEY_RESTART,
+ .code = KEY_COPY,
.gpio = QNAP_TS209_GPIO_KEY_MEDIA,
.desc = "USB Copy Button",
.active_low = 1,
}, {
- .code = KEY_POWER,
+ .code = KEY_RESTART,
.gpio = QNAP_TS209_GPIO_KEY_RESET,
.desc = "Reset Button",
.active_low = 1,
orion5x_i2c_init();
orion5x_sata_init(&qnap_ts209_sata_data);
orion5x_uart0_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
QNAP_TS209_NOR_BOOT_SIZE);
*
* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
*
+ * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
I2C_BOARD_INFO("s35390a", 0x30),
};
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+ {
+ .name = "ts409:red:sata1",
+ .gpio = 4,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata2",
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata3",
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .name = "ts409:red:sata4",
+ .gpio = 7,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+ .leds = ts409_led_pins,
+ .num_leds = ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts409_led_data,
+ },
+};
+
/****************************************************************************
* GPIO Attached Keys
* Power button is attached to the PIC microcontroller
****************************************************************************/
+#define QNAP_TS409_GPIO_KEY_RESET 14
#define QNAP_TS409_GPIO_KEY_MEDIA 15
static struct gpio_keys_button qnap_ts409_buttons[] = {
{
.code = KEY_RESTART,
+ .gpio = QNAP_TS409_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_COPY,
.gpio = QNAP_TS409_GPIO_KEY_MEDIA,
.desc = "USB Copy Button",
.active_low = 1,
if (qnap_ts409_i2c_rtc.irq == 0)
pr_warning("qnap_ts409_init: failed to get RTC IRQ\n");
i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+ platform_device_register(&ts409_leds);
/* register tsx09 specific power-off method */
pm_power_off = qnap_tsx09_power_off;
orion5x_sata_init(&ts78xx_sata_data);
orion5x_uart0_init();
orion5x_uart1_init();
+ orion5x_xor_init();
orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE,
TS78XX_NOR_BOOT_SIZE);
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
+
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+ struct device *dev)
+{
+ struct clk *r = clk_lookup(dev, id);
+ struct clk *new;
+
+ if (!r)
+ return -ENODEV;
+
+ new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+ if (!new)
+ return -ENOMEM;
+
+ new->name = alias;
+ new->dev = alias_dev;
+ new->other = r;
+
+ mutex_lock(&clocks_mutex);
+ list_add(&new->node, &clocks);
+ mutex_unlock(&clocks_mutex);
+
+ return 0;
+}
+#include <linux/list.h>
+
struct clk;
struct clkops {
#endif
void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+ struct device *dev);
+
*
*/
+#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
#include "generic.h"
+static unsigned long e740_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO79_nCS_3, /* CS3 - IMAGEON */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* PC Card */
+ GPIO8_GPIO, /* CD0 */
+ GPIO44_GPIO, /* CD1 */
+ GPIO11_GPIO, /* IRQ0 */
+ GPIO6_GPIO, /* IRQ1 */
+ GPIO27_GPIO, /* RST0 */
+ GPIO24_GPIO, /* RST1 */
+ GPIO20_GPIO, /* PWR0 */
+ GPIO23_GPIO, /* PWR1 */
+ GPIO48_nPOE,
+ GPIO49_nPWE,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO54_nPSKTSEL,
+ GPIO55_nPREG,
+ GPIO56_nPWAIT,
+ GPIO57_nIOIS16,
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+static unsigned long e400_pin_config[] __initdata = {
+ /* Chip selects */
+ GPIO15_nCS_1, /* CS1 - Flash */
+ GPIO80_nCS_4, /* CS4 - TMIO */
+
+ /* Clocks */
+ GPIO12_32KHz,
+
+ /* BTUART */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+ /* wakeup */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
/* Only e800 has 128MB RAM */
static void __init eseries_fixup(struct machine_desc *desc,
- struct tag *tags, char **cmdline, struct meminfo *mi)
+ struct tag *tags, char **cmdline, struct meminfo *mi)
{
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].size = (64*1024*1024);
}
+static void __init e740_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
+static void __init e400_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
/* e-series machine definitions */
#ifdef CONFIG_MACH_E330
MACHINE_START(E330, "Toshiba e330")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E350
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E740
MACHINE_START(E740, "Toshiba e740")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e740_init,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E750
MACHINE_START(E750, "Toshiba e750")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E400
MACHINE_START(E400, "Toshiba e400")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .init_machine = e400_init,
+ .timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_E800
MACHINE_START(E800, "Toshiba e800")
- /* Maintainer: Ian Molton (spyro@f2s.com) */
- .phys_io = 0x40000000,
- .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
- .boot_params = 0xa0000100,
- .map_io = pxa_map_io,
- .init_irq = pxa25x_init_irq,
- .fixup = eseries_fixup,
- .timer = &pxa_timer,
+ /* Maintainer: Ian Molton (spyro@f2s.com) */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .fixup = eseries_fixup,
+ .timer = &pxa_timer,
MACHINE_END
#endif
defined(CONFIG_MACH_TOSA) || \
defined(CONFIG_MACH_MAINSTONE) || \
defined(CONFIG_MACH_PCM027) || \
+ defined(CONFIG_ARCH_PXA_ESERIES) || \
defined(CONFIG_MACH_MAGICIAN)
#define NR_IRQS (IRQ_BOARD_END)
#elif defined(CONFIG_MACH_ZYLONITE)
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARCH_PXA_MTD_XIP_H__
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
+#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13)
+
extern struct platform_device poodle_locomo_device;
#endif /* __ASM_ARCH_POODLE_H */
* bits 10-17 : for AC Bias Pin Frequency
* bit 18 : for output enable polarity
* bit 19 : for pixel clock edge
+ * bit 20 : for output pixel format when base is RGBT16
*/
#define LCD_CONN_TYPE(_x) ((_x) & 0x0f)
#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f)
#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL)
#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH (0 << 17)
-#define LCD_BIAS_ACTIVE_LOW (1 << 17)
-#define LCD_PCLK_EDGE_RISE (0 << 18)
-#define LCD_PCLK_EDGE_FALL (1 << 18)
+#define LCD_BIAS_ACTIVE_HIGH (0 << 18)
+#define LCD_BIAS_ACTIVE_LOW (1 << 18)
+#define LCD_PCLK_EDGE_RISE (0 << 19)
+#define LCD_PCLK_EDGE_FALL (1 << 19)
+#define LCD_ALTERNATE_MAPPING (1 << 20)
/*
* This structure describes the machine which we are running on.
#include <mach/mmc.h>
#include "generic.h"
+#include "clock.h"
#include "devices.h"
static unsigned long lubbock_pin_config[] __initdata = {
pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+ clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
;
/*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
*/
static struct clk pxa25x_clks[] = {
INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
-static struct clk pxa2xx_clk_aliases[] = {
- INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
- INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
-};
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
if (cpu_is_pxa255())
ret = platform_device_register(&pxa_device_hwuart);
- clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
-
return ret;
}
};
static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
};
static int __init pxa300_init(void)
*/
#ifndef __ASM_ARM_REGS_CLOCK
-#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+#define __ASM_ARM_REGS_CLOCK
#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+#define __ASM_ARCH_REGS_GPIO_H
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#ifndef ___ASM_ARCH_REGS_IRQ_H
-#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+#define ___ASM_ARCH_REGS_IRQ_H
/* interrupt controller */
#ifndef ___ASM_ARCH_REGS_LCD_H
-#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+#define ___ASM_ARCH_REGS_LCD_H
#define S3C2410_LCDREG(x) (x)
*/
#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+#define __ASM_ARM_MEMREGS_H
#ifndef S3C2410_MEMREG
#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
&bast_sio,
};
-static struct clk *bast_clocks[] = {
+static struct clk *bast_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
* Copyright (C) 2004 by FS Forth-Systeme GmbH
* All rights reserved.
*
- * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $
* @Author: Jonas Dietsche
*
* This program is free software; you can redistribute it and/or
&vr1000_led3,
};
-static struct clk *vr1000_clocks[] = {
+static struct clk *vr1000_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
#include <linux/spi/spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
&anubis_device_sm501,
};
-static struct clk *anubis_clocks[] = {
+static struct clk *anubis_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
&osiris_pcmcia,
};
-static struct clk *osiris_clocks[] = {
+static struct clk *osiris_clocks[] __initdata = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
*
* Copyright (C) 2001 Russell King
*
- * $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
- *
- * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
*/
#ifndef __ARCH_SA1100_MTD_XIP_H__
#include <linux/init.h>
#include <asm/cacheflush.h>
-#include <asm/plat-orion/cache-feroceon-l2.h>
+#include <plat/cache-feroceon-l2.h>
/*
create_mapping(io_desc + i);
}
+static int __init check_membank_valid(struct membank *mb)
+{
+ /*
+ * Check whether this memory region has non-zero size.
+ */
+ if (mb->size == 0)
+ return 0;
+
+ /*
+ * Check whether this memory region would entirely overlap
+ * the vmalloc area.
+ */
+ if (phys_to_virt(mb->start) >= VMALLOC_MIN) {
+ printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx "
+ "(vmalloc region overlap).\n",
+ mb->start, mb->start + mb->size - 1);
+ return 0;
+ }
+
+ /*
+ * Check whether this memory region would partially overlap
+ * the vmalloc area.
+ */
+ if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) ||
+ phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) {
+ unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start);
+
+ printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx "
+ "to -%.8lx (vmalloc region overlap).\n",
+ mb->start, mb->start + mb->size - 1,
+ mb->start + newsize - 1);
+ mb->size = newsize;
+ }
+
+ return 1;
+}
+
+static void __init sanity_check_meminfo(struct meminfo *mi)
+{
+ int i;
+ int j;
+
+ for (i = 0, j = 0; i < mi->nr_banks; i++) {
+ if (check_membank_valid(&mi->bank[i]))
+ mi->bank[j++] = mi->bank[i];
+ }
+ mi->nr_banks = j;
+}
+
static inline void prepare_page_table(struct meminfo *mi)
{
unsigned long addr;
void *zero_page;
build_mem_type_table();
+ sanity_check_meminfo(mi);
prepare_page_table(mi);
bootmem_init(mi);
devicemaps_init(mdesc);
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
/* ARM940T has a 4KB DCache comprising 256 lines of 4 words */
#define CACHE_DLINESIZE 16
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
/*
* ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache,
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
(dma_addr_t)virt_to_lbus(page_address(page)) : \
(dma_addr_t)__virt_to_bus(page_address(page));})
-#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __bus_to_virt(addr);})
-
-#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \
- virt_to_lbus(addr) : \
- __virt_to_bus(addr);})
+#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __bus_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
+ (dma_addr_t) (is_lbus_device(dev) ? \
+ virt_to_lbus(__addr) : \
+ __virt_to_bus(__addr)); })
#endif /* CONFIG_ARCH_OMAP15XX */
/*
- * include/asm-arm/plat-orion/cache-feroceon-l2.h
+ * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h
*
* Copyright (C) 2008 Marvell Semiconductor
*
/*
- * include/asm-arm/plat-orion/ehci-orion.h
+ * arch/arm/plat-orion/include/plat/ehci-orion.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_EHCI_ORION_H
-#define __ASM_PLAT_ORION_EHCI_ORION_H
+#ifndef __PLAT_EHCI_ORION_H
+#define __PLAT_EHCI_ORION_H
#include <linux/mbus.h>
/*
- * include/asm-arm/plat-orion/irq.h
+ * arch/arm/plat-orion/include/plat/irq.h
*
* Marvell Orion SoC IRQ handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_IRQ_H
-#define __ASM_PLAT_ORION_IRQ_H
+#ifndef __PLAT_IRQ_H
+#define __PLAT_IRQ_H
void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr);
/*
+ * arch/arm/plat-orion/include/plat/mv_xor.h
+ *
* Marvell XOR platform device data definition file.
*/
-#ifndef __ASM_PLAT_ORION_MV_XOR_H
-#define __ASM_PLAT_ORION_MV_XOR_H
+#ifndef __PLAT_MV_XOR_H
+#define __PLAT_MV_XOR_H
#include <linux/dmaengine.h>
#include <linux/mbus.h>
/*
- * include/asm-arm/plat-orion/orion_nand.h
+ * arch/arm/plat-orion/include/plat/orion_nand.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_ORION_NAND_H
-#define __ASM_PLAT_ORION_ORION_NAND_H
+#ifndef __PLAT_ORION_NAND_H
+#define __PLAT_ORION_NAND_H
/*
* Device bus NAND private data
/*
- * include/asm-arm/plat-orion/pcie.h
+ * arch/arm/plat-orion/include/plat/pcie.h
*
* Marvell Orion SoC PCIe handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_PCIE_H
-#define __ASM_PLAT_ORION_PCIE_H
+#ifndef __PLAT_PCIE_H
+#define __PLAT_PCIE_H
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
/*
- * include/asm-arm/plat-orion/time.h
+ * arch/arm/plat-orion/include/plat/time.h
*
* Marvell Orion SoC time handling.
*
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_PLAT_ORION_TIME_H
-#define __ASM_PLAT_ORION_TIME_H
+#ifndef __PLAT_TIME_H
+#define __PLAT_TIME_H
void orion_time_init(unsigned int irq, unsigned int tclk);
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
-#include <asm/plat-orion/irq.h>
+#include <plat/irq.h>
static void orion_irq_mask(u32 irq)
{
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
-#include <asm/plat-orion/pcie.h>
+#include <plat/pcie.h>
/*
* PCIe unit register offsets.
IODESC_ENT(UART)
};
-
-static struct cpu_table *
-s3c_lookup_cpu(unsigned long idcode)
+static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode)
{
struct cpu_table *tab;
int count;
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sun Jul 13 12:04:05 2008
+# Last update: Wed Aug 13 21:56:02 2008
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
gecko MACH_GECKO GECKO 832
ds101 MACH_DS101 DS101 833
omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834
-xscale_palmld MACH_XSCALE_PALMLD XSCALE_PALMLD 835
+palmld MACH_PALMLD PALMLD 835
cc9c MACH_CC9C CC9C 836
sbc1670 MACH_SBC1670 SBC1670 837
ixdp28x5 MACH_IXDP28X5 IXDP28X5 838
arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841
osiris MACH_OSIRIS OSIRIS 842
maestro MACH_MAESTRO MAESTRO 843
-tunge2 MACH_TUNGE2 TUNGE2 844
+palmte2 MACH_PALMTE2 PALMTE2 844
ixbbm MACH_IXBBM IXBBM 845
mx27ads MACH_MX27ADS MX27ADS 846
ax8004 MACH_AX8004 AX8004 847
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmtreo650 MACH_PALMTREO650 PALMTREO650 909
+palmt650 MACH_PALMT650 PALMT650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
multmdw MACH_MULTMDW MULTMDW 1087
mba2440 MACH_MBA2440 MBA2440 1088
ecsd MACH_ECSD ECSD 1089
-zire31 MACH_ZIRE31 ZIRE31 1090
+palmz31 MACH_PALMZ31 PALMZ31 1090
fsg MACH_FSG FSG 1091
razor101 MACH_RAZOR101 RAZOR101 1092
opera_tdm MACH_OPERA_TDM OPERA_TDM 1093
pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820
jade MACH_JADE JADE 1821
ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822
-gprisc4 MACH_GPRISC4 GPRISC4 1823
+gprisc3 MACH_GPRISC4 GPRISC4 1823
stamp9260 MACH_STAMP9260 STAMP9260 1824
smdk6430 MACH_SMDK6430 SMDK6430 1825
smdkc100 MACH_SMDKC100 SMDKC100 1826
at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
+adx_rmu MACH_ADX_RMU ADX_RMU 1833
+xg_cpe_main MACH_XG_CPE_MAIN XG_CPE_MAIN 1834
+edb9407a MACH_EDB9407A EDB9407A 1835
+dtb9608 MACH_DTB9608 DTB9608 1836
+em104v1 MACH_EM104V1 EM104V1 1837
+demo MACH_DEMO DEMO 1838
+logi9260 MACH_LOGI9260 LOGI9260 1839
+mx31_exm32 MACH_MX31_EXM32 MX31_EXM32 1840
+usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841
+picproje2008 MACH_PICPROJE2008 PICPROJE2008 1842
+cs_e9315 MACH_CS_E9315 CS_E9315 1843
+qil_a9g20 MACH_QIL_A9G20 QIL_A9G20 1844
+sha_pon020 MACH_SHA_PON020 SHA_PON020 1845
+nad MACH_NAD NAD 1846
+sbc35_a9260 MACH_SBC35_A9260 SBC35_A9260 1847
+sbc35_a9g20 MACH_SBC35_A9G20 SBC35_A9G20 1848
+davinci_beginning MACH_DAVINCI_BEGINNING DAVINCI_BEGINNING 1849
+uwc MACH_UWC UWC 1850
+mxlads MACH_MXLADS MXLADS 1851
+htcnike MACH_HTCNIKE HTCNIKE 1852
+deister_pxa270 MACH_DEISTER_PXA270 DEISTER_PXA270 1853
+cme9210js MACH_CME9210JS CME9210JS 1854
+cc9p9360 MACH_CC9P9360 CC9P9360 1855
+mocha MACH_MOCHA MOCHA 1856
+wapd170ag MACH_WAPD170AG WAPD170AG 1857
+linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858
+afeb9260 MACH_AFEB9260 AFEB9260 1859
+w90x900 MACH_W90X900 W90X900 1860
+w90x700 MACH_W90X700 W90X700 1861
+kt300ip MACH_KT300IP KT300IP 1862
+kt300ip_g20 MACH_KT300IP_G20 KT300IP_G20 1863
+srcm MACH_SRCM SRCM 1864
+wlnx_9260 MACH_WLNX_9260 WLNX_9260 1865
+openmoko_gta03 MACH_OPENMOKO_GTA03 OPENMOKO_GTA03 1866
+osprey2 MACH_OSPREY2 OSPREY2 1867
+kbio9260 MACH_KBIO9260 KBIO9260 1868
+ginza MACH_GINZA GINZA 1869
+a636n MACH_A636N A636N 1870
+imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871
+nenoc MACH_NEMOC NEMOC 1872
+geneva MACH_GENEVA GENEVA 1873
config MEM_MT48LC32M16A2TG_75
bool
- depends on (BFIN527_EZKIT || BFIN532_IP0X)
+ depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP)
default y
source "arch/blackfin/mach-bf527/Kconfig"
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
- default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS)
+ default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
- default "16" if H8606_HVSISTEMAS
+ default "16" if (H8606_HVSISTEMAS || BLACKSTAMP)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
+comment "Speed Optimizations"
+config BFIN_INS_LOWOVERHEAD
+ bool "ins[bwl] low overhead, higher interrupt latency"
+ default y
+ help
+ Reads on the Blackfin are speculative. In Blackfin terms, this means
+ they can be interrupted at any time (even after they have been issued
+ on to the external bus), and re-issued after the interrupt occurs.
+ For memory - this is not a big deal, since memory does not change if
+ it sees a read.
+
+ If a FIFO is sitting on the end of the read, it will see two reads,
+ when the core only sees one since the FIFO receives both the read
+ which is cancelled (and not delivered to the core) and the one which
+ is re-issued (which is delivered to the core).
+
+ To solve this, interrupts are turned off before reads occur to
+ I/O space. This option controls which the overhead/latency of
+ controlling interrupts during this time
+ "n" turns interrupts off every read
+ (higher overhead, but lower interrupt latency)
+ "y" turns interrupts off every loop
+ (low overhead, but longer interrupt latency)
+
+ default behavior is to leave this set to on (type "Y"). If you are experiencing
+ interrupt latency issues, it is safe and OK to turn this off.
+
endmenu
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
depends on PM
-config PM_BFIN_WAKE_RTC
- bool "Allow Wake-Up from RESET and on-chip RTC"
- depends on PM
- default n
- help
- Enable RTC Wake-Up (Voltage Regulator Power-Up)
-
config PM_BFIN_WAKE_PH6
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
depends on PM && (BF52x || BF534 || BF536 || BF537)
help
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
-config PM_BFIN_WAKE_CAN
- bool "Allow Wake-Up from on-chip CAN0/1"
- depends on PM && (BF54x || BF534 || BF536 || BF537)
- default n
- help
- Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
-
config PM_BFIN_WAKE_GP
bool "Allow Wake-Up from GPIOs"
depends on PM && BF54x
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_USB
- bool "Allow Wake-Up from on-chip USB"
- depends on PM && (BF54x || BF52x)
- default n
- help
- Enable USB Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_KEYPAD
- bool "Allow Wake-Up from on-chip Keypad"
- depends on PM && BF54x
- default n
- help
- Enable Keypad Wake-Up (Voltage Regulator Power-Up)
-
-config PM_BFIN_WAKE_ROTARY
- bool "Allow Wake-Up from on-chip Rotary"
- depends on PM && BF54x
- default n
- help
- Enable Rotary Wake-Up (Voltage Regulator Power-Up)
-
endmenu
menu "CPU Frequency scaling"
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+CONFIG_BF532=y
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+CONFIG_BF_REV_0_5=y
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_MEM_MT48LC32M16A2TG_75=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
+CONFIG_BLACKSTAMP=y
+# CONFIG_GENERIC_BF533_BOARD is not set
+
+#
+# BF533/2/1 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_UART_ERROR=7
+CONFIG_SPORT0_ERROR=7
+CONFIG_SPI_ERROR=7
+CONFIG_SPORT1_ERROR=7
+CONFIG_PPI_ERROR=7
+CONFIG_DMA_ERROR=7
+CONFIG_PLLWAKE_ERROR=7
+CONFIG_RTC_ERROR=8
+CONFIG_DMA0_PPI=8
+CONFIG_DMA1_SPORT0RX=9
+CONFIG_DMA2_SPORT0TX=9
+CONFIG_DMA3_SPORT1RX=9
+CONFIG_DMA4_SPORT1TX=9
+CONFIG_DMA5_SPI=10
+CONFIG_DMA6_UARTRX=10
+CONFIG_DMA7_UARTTX=10
+CONFIG_TIMER0=11
+CONFIG_TIMER1=11
+CONFIG_TIMER2=11
+CONFIG_PFA=12
+CONFIG_PFB=12
+CONFIG_MEMDMA0=13
+CONFIG_MEMDMA1=13
+CONFIG_WDTIMER=13
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+# CONFIG_PLL_BYPASS is not set
+# CONFIG_CLKIN_HALF is not set
+CONFIG_VCO_MULT=16
+CONFIG_CCLK_DIV_1=y
+# CONFIG_CCLK_DIV_2 is not set
+# CONFIG_CCLK_DIV_4 is not set
+# CONFIG_CCLK_DIV_8 is not set
+CONFIG_SCLK_DIV=3
+CONFIG_MAX_MEM_SIZE=64
+CONFIG_MAX_VCO_HZ=400000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Memory Setup
+#
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+# CONFIG_RAMKERNEL is not set
+CONFIG_ROMKERNEL=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xAAC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM_BFIN_SLEEP_DEEPER=y
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# Possible Suspend Mem / Hibernate Wake-Up Sources
+#
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_SMC91X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+CONFIG_BF5xx_PPI=y
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=m
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_SPI=y
+# CONFIG_SPI_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=m
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Thu Jul 31 00:53:15 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+# CONFIG_BF527 is not set
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+CONFIG_BF537=y
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+# CONFIG_BF_REV_0_1 is not set
+CONFIG_BF_REV_0_2=y
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF53x=y
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN537_BLUETECHNIX_TCM=y
+# CONFIG_PNAV10 is not set
+# CONFIG_CAMSIG_MINOTAUR is not set
+# CONFIG_GENERIC_BF537_BOARD is not set
+
+#
+# BF537 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMA_ERROR=7
+CONFIG_IRQ_ERROR=7
+CONFIG_IRQ_CAN_RX=11
+CONFIG_IRQ_CAN_TX=11
+CONFIG_IRQ_PROG_INTA=12
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=32
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+CONFIG_IP_CHECKSUM_L1=y
+CONFIG_CACHELINE_ALIGNED_L1=y
+CONFIG_SYSCALL_TAB_L1=y
+CONFIG_CPLB_SWITCH_TAB_L1=y
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC2
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_SPORT=y
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
#include <asm/cplbinit.h>
#if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
{
unsigned long ctrl;
int i;
#endif
#if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
{
unsigned long ctrl;
int i;
#include <asm/cplbinit.h>
#if defined(CONFIG_BFIN_ICACHE)
-void bfin_icache_init(void)
+void __init bfin_icache_init(void)
{
unsigned long *table = icplb_table;
unsigned long ctrl;
#endif
#if defined(CONFIG_BFIN_DCACHE)
-void bfin_dcache_init(void)
+void __init bfin_dcache_init(void)
{
unsigned long *table = dcplb_table;
unsigned long ctrl;
.name = "Asynchronous Memory Banks",
},
{
-#ifdef L2_START
.start = L2_START,
.end = L2_START + L2_LENGTH,
.psize = SIZE_1M,
.attr = SWITCH_T | I_CPLB | D_CPLB,
.i_conf = L2_MEMORY,
.d_conf = L2_MEMORY,
- .valid = 1,
-#else
- .valid = 0,
-#endif
+ .valid = (L2_LENGTH > 0),
.name = "L2 Memory",
},
{
#endif
char __initdata command_line[COMMAND_LINE_SIZE];
+unsigned int __initdata *__retx;
/* boot memmap, for parsing "memmap=" */
#define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */
dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
l1_data_a_length, l1_data_b_length);
-#ifdef L2_LENGTH
- l2_length = _ebss_l2 - _stext_l2;
- if (l2_length > L2_LENGTH)
- panic("L2 SRAM Overflow\n");
+ if (L2_LENGTH != 0) {
+ l2_length = _ebss_l2 - _stext_l2;
+ if (l2_length > L2_LENGTH)
+ panic("L2 SRAM Overflow\n");
- /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
- dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
-#endif
+ /* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+ dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+ }
}
/* add_memory_region to memmap */
memory_setup();
+ /* Initialize Async memory banks */
+ bfin_write_EBIU_AMBCTL0(AMBCTL0VAL);
+ bfin_write_EBIU_AMBCTL1(AMBCTL1VAL);
+ bfin_write_EBIU_AMGCTL(AMGCTLVAL);
+#ifdef CONFIG_EBIU_MBSCTLVAL
+ bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL);
+ bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL);
+ bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL);
+#endif
+
cclk = get_cclk();
sclk = get_sclk();
bfin_write_SWRST(DOUBLE_FAULT);
if (_bfin_swrst & RESET_DOUBLE)
- printk(KERN_INFO "Recovering from Double Fault event\n");
+ /*
+ * don't decode the address, since you don't know if this
+ * kernel's symbol map is the same as the crashing kernel
+ */
+ printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx);
else if (_bfin_swrst & RESET_WDOG)
printk(KERN_INFO "Recovering from Watchdog event\n");
else if (_bfin_swrst & RESET_SOFTWARE)
dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
BFIN_DLINES);
#ifdef CONFIG_BFIN_ICACHE_LOCK
- switch (read_iloc()) {
+ switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
break;
* we don't read something in the async space that can hang forever
*/
if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
-#ifdef L2_START
+#if L2_LENGTH != 0
(addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
#endif
(addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
return false;
}
+/*
+ * decode the instruction if we are printing out the trace, as it
+ * makes things easier to follow, without running it through objdump
+ * These are the normal instructions which cause change of flow, which
+ * would be at the source of the trace buffer
+ */
+void decode_instruction(unsigned short *address)
+{
+ unsigned short opcode;
+
+ if (get_instruction(&opcode, address)) {
+ if (opcode == 0x0010)
+ printk("RTS");
+ else if (opcode == 0x0011)
+ printk("RTI");
+ else if (opcode == 0x0012)
+ printk("RTX");
+ else if (opcode >= 0x0050 && opcode <= 0x0057)
+ printk("JUMP (P%i)", opcode & 7);
+ else if (opcode >= 0x0060 && opcode <= 0x0067)
+ printk("CALL (P%i)", opcode & 7);
+ else if (opcode >= 0x0070 && opcode <= 0x0077)
+ printk("CALL (PC+P%i)", opcode & 7);
+ else if (opcode >= 0x0080 && opcode <= 0x0087)
+ printk("JUMP (PC+P%i)", opcode & 7);
+ else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF))
+ printk("IF !CC JUMP");
+ else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff))
+ printk("IF CC JUMP");
+ else if (opcode >= 0x2000 && opcode <= 0x2fff)
+ printk("JUMP.S");
+ else if (opcode >= 0xe080 && opcode <= 0xe0ff)
+ printk("LSETUP");
+ else if (opcode >= 0xe200 && opcode <= 0xe2ff)
+ printk("JUMP.L");
+ else if (opcode >= 0xe300 && opcode <= 0xe3ff)
+ printk("CALL pcrel");
+ else
+ printk("0x%04x", opcode);
+ }
+
+}
+
void dump_bfin_trace_buffer(void)
{
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
int tflags, i = 0;
char buf[150];
- unsigned short val = 0, *addr;
+ unsigned short *addr;
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
int j, index;
#endif
printk(KERN_NOTICE "Hardware Trace:\n");
+#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
+ printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n");
+#endif
+
if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
decode_address(buf, (unsigned long)bfin_read_TBUF());
addr = (unsigned short *)bfin_read_TBUF();
decode_address(buf, (unsigned long)addr);
printk(KERN_NOTICE " Source : %s ", buf);
- if (get_instruction(&val, addr)) {
- if (val == 0x0010)
- printk("RTS");
- else if (val == 0x0011)
- printk("RTI");
- else if (val == 0x0012)
- printk("RTX");
- else if (val >= 0x0050 && val <= 0x0057)
- printk("JUMP (P%i)", val & 7);
- else if (val >= 0x0060 && val <= 0x0067)
- printk("CALL (P%i)", val & 7);
- else if (val >= 0x0070 && val <= 0x0077)
- printk("CALL (PC+P%i)", val & 7);
- else if (val >= 0x0080 && val <= 0x0087)
- printk("JUMP (PC+P%i)", val & 7);
- else if ((val >= 0x1000 && val <= 0x13FF) ||
- (val >= 0x1800 && val <= 0x1BFF))
- printk("IF !CC JUMP");
- else if ((val >= 0x1400 && val <= 0x17ff) ||
- (val >= 0x1c00 && val <= 0x1fff))
- printk("IF CC JUMP");
- else if (val >= 0x2000 && val <= 0x2fff)
- printk("JUMP.S");
- else if (val >= 0xe080 && val <= 0xe0ff)
- printk("LSETUP");
- else if (val >= 0xe200 && val <= 0xe2ff)
- printk("JUMP.L");
- else if (val >= 0xe300 && val <= 0xe3ff)
- printk("CALL pcrel");
- else
- printk("0x%04x", val);
- }
+ decode_instruction(addr);
printk("\n");
}
}
#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
if (trace_buff_offset)
- index = trace_buff_offset/4 - 1;
+ index = trace_buff_offset / 4;
else
index = EXPAND_LEN;
if (index < 0 )
index = EXPAND_LEN;
decode_address(buf, software_trace_buff[index]);
- printk(KERN_NOTICE " Source : %s\n", buf);
+ printk(KERN_NOTICE " Source : %s ", buf);
+ decode_instruction((unsigned short *)software_trace_buff[index]);
+ printk("\n");
index -= 1;
if (index < 0)
index = EXPAND_LEN;
#if !L1_DATA_B_LENGTH
*(.l1.bss.B)
#endif
+ . = ALIGN(4);
___bss_stop = .;
}
#if !L1_DATA_B_LENGTH
*(.l1.data.B)
#endif
-#ifndef L2_LENGTH
+#if !L2_LENGTH
. = ALIGN(32);
*(.data_l2.cacheline_aligned)
*(.l2.data)
__ebss_b_l1 = .;
}
-#ifdef L2_LENGTH
__l2_lma_start = .;
.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
{
. = ALIGN(4);
__stext_l2 = .;
- *(.l1.text)
+ *(.l2.text)
. = ALIGN(4);
__etext_l2 = .;
. = ALIGN(4);
__sdata_l2 = .;
- *(.l1.data)
+ *(.l2.data)
__edata_l2 = .;
. = ALIGN(32);
. = ALIGN(4);
__sbss_l2 = .;
- *(.l1.bss)
+ *(.l2.bss)
. = ALIGN(4);
__ebss_l2 = .;
}
-#endif
/* Force trailing alignment of our init section so that when we
* free our init memory, we don't leave behind a partial page.
.align 2
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ * - turns interrupts off every read (higher overhead, but lower latency)
+ * - turns interrupts off every loop (low overhead, but longer latency)
+ * - DMA version, which do not suffer from this issue. DMA versions have
+ * different name (prefixed by dma_ ), and are located in
+ * ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
ENTRY(_insl)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Llong_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = [P0];
+ [P1++] = R0;
+.Llong_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insl)
ENTRY(_insw)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lword_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = W[P0];
+ W[P1++] = R0;
+.Lword_loop_e:
+ STI R3;
+ RTS;
+
+#endif
ENDPROC(_insw)
ENTRY(_insw_8)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lword8_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = W[P0];
+ B[P1++] = R0;
+ R0 = R0 >> 8;
+ B[P1++] = R0;
+ NOP;
+.Lword8_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insw_8)
ENTRY(_insb)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Lbyte_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = B[P0];
+ B[P1++] = R0;
+.Lbyte_loop_e:
+ STI R3;
+
+ RTS;
+#endif
ENDPROC(_insb)
ENTRY(_insl_16)
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
P0 = R0; /* P0 = port */
cli R3;
P1 = R1; /* P1 = address */
.Llong16_loop_e: NOP;
sti R3;
RTS;
+#else
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2;
+.Llong16_loop_s:
+ CLI R3;
+ NOP; NOP; NOP;
+ R0 = [P0];
+ W[P1++] = R0;
+ R0 = R0 >> 16;
+ W[P1++] = R0;
+.Llong16_loop_e:
+ STI R3;
+ RTS;
+#endif
ENDPROC(_insl_16)
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/pata_platform.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
-
-#if defined(CONFIG_BF527)
- p0.h = hi(EMAC_SYSTAT);
- p0.l = lo(EMAC_SYSTAT);
- R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
- R0.l = 0xFFFF;
- [P0] = R0;
- SSYNC;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(UART1_LCR);
- p0.l = lo(UART1_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(UART1_DLL);
- p0.l = lo(UART1_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART1_DLH);
- p0.l = lo(UART1_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(UART1_GCTL);
- p0.l = lo(UART1_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00060000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0x100000,
.offset = 0x60000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x6a0000,
.offset = 0x00160000,
}
help
BF533-STAMP board support.
+config BLACKSTAMP
+ bool "BlackStamp"
+ help
+ Support for the BlackStamp board. Hardware info available at
+ http://blackfin.uclinux.org/gf/project/blackstamp/
+
config BFIN533_BLUETECHNIX_CM
bool "Bluetechnix CM-BF533"
depends on (BF533)
obj-$(CONFIG_BFIN532_IP0X) += ip0x.o
obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP) += blackstamp.o
obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf533/blackstamp.c
+ * Based on: arch/blackfin/mach-bf533/stamp.c
+ * Author: Benjamin Matthews <bmat@lle.rochester.edu>
+ * Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2008
+ * Description: Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF3,
+ .end = IRQ_PF3,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = 0x180000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(spi)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. */
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+ {
+ .modalias = "spidev",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 7,
+ .controller_data = &spidev_chip_info,
+ },
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+ {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+ {BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+ {BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+ .buttons = bfin_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev = {
+ .platform_data = &bfin_gpio_keys_data,
+ },
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+ .start = 0,
+ .end = MAX_BLACKFIN_GPIOS - 1,
+ .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+ .name = "simple-gpio",
+ .id = -1,
+ .num_resources = 1,
+ .resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = 8,
+ .scl_pin = 9,
+ .sda_is_open_drain = 0,
+ .scl_is_open_drain = 0,
+ .udelay = 40,
+}; /* This hasn't actually been used these pins
+ * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &i2c_gpio_data,
+ },
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 600000000),
+ VRPAIR(VLEV_125, 600000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+ &bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+ &i2c_gpio_device,
+#endif
+
+ &bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+ ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+ if (ret < 0)
+ return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+ bfin_write_FIO_FLAG_S(PF0);
+ SSYNC();
+#endif
+
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ return 0;
+}
+
+arch_initcall(blackstamp_init);
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 38
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 2,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x2030C000,
- .end = 0x2030C01F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2030D018,
- .end = 0x2030D01B,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_085, 250000000),
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
&bfin_spi0_device,
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
};
static int __init cm_bf533_init(void)
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sir_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <asm/dma.h>
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0xE0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sport1_uart_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- p0.h = hi(FIO_MASKA_C);
- p0.l = lo(FIO_MASKA_C);
- r0 = 0xFFFF(Z);
- w[p0] = r0.L; /* Disable all interrupts */
- ssync;
-
- p0.h = hi(FIO_MASKB_C);
- p0.l = lo(FIO_MASKB_C);
- r0 = 0xFFFF(Z);
- w[p0] = r0.L; /* Disable all interrupts */
- ssync;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |
help
CM-BF537 support for EVAL- and DEV-Board.
+config BFIN537_BLUETECHNIX_TCM
+ bool "Bluetechnix TCM-BF537"
+ depends on (BF537)
+ help
+ TCM-BF537 support for EVAL- and DEV-Board.
+
config PNAV10
bool "PNAV board"
depends on (BF537)
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
+obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0xE0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+ .width = 2,
+ .parts = cm_partitions,
+ .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+ {
+ .name = "cfi_probe",
+ .start = 0x20000000,
+ .end = 0x201fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = (unsigned long)cm_flash_gpios,
+ .end = ARRAY_SIZE(cm_flash_gpios),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device cm_flash_device = {
+ .name = "gpio-addr-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cm_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(cm_flash_resource),
+ .resource = cm_flash_resource,
+};
+#endif
+
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 64
+#define PATA_INT IRQ_PF14
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 2,
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
&bfin_pata_device,
#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+ &cm_flash_device,
+#endif
};
static int __init cm_bf537_init(void)
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
-#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
};
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
static struct platform_device *stamp_devices[] __initdata = {
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
&bfin_pcmcia_cf_device,
&bfin_sport0_uart_device,
&bfin_sport1_uart_device,
#endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
};
static int __init stamp_init(void)
ARRAY_SIZE(bfin_spi_board_info));
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "uboot",
+ .name = "bootloader(spi)",
.size = PSIZE_UBOOT,
.offset = 0x000000,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "initramfs",
+ .name = "initramfs(spi)",
.size = PSIZE_INITRAMFS,
.offset = PSIZE_UBOOT
}, {
- .name = "opt",
+ .name = "opt(spi)",
.size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
.offset = PSIZE_UBOOT + PSIZE_INITRAMFS,
}
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
static struct mtd_partition bfin_plat_nand_partitions[] = {
{
- .name = "linux kernel",
+ .name = "linux kernel(nand)",
.size = 0x400000,
.offset = 0,
}, {
- .name = "file system",
+ .name = "file system(nand)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
},
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0xE0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = 0x400000 - 0x40000 - 0xE0000 - 0x10000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "MAC Address",
+ .name = "MAC Address(nor)",
.size = MTDPART_SIZ_FULL,
.offset = 0x3F0000,
.mask_flags = MTD_WRITEABLE,
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c
+ * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created: 2005
+ * Description: Board description file
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix TCM BF537";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader(spi)",
+ .size = 0x00020000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "linux kernel(spi)",
+ .size = 0xe0000,
+ .offset = 0x20000
+ }, {
+ .name = "file system(spi)",
+ .size = 0x700000,
+ .offset = 0x00100000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+ .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+ .enable_dma = 1, /* use dma transfer with this chip*/
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+ .enable_dma = 0,
+ .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+ .enable_dma = 1,
+ .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
+ {
+ .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 1, /* Framework chip select. */
+ .platform_data = NULL, /* No spi_driver specific config */
+ .controller_data = &spi_adc_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+ {
+ .modalias = "ad1836-spi",
+ .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+ .controller_data = &ad1836_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+ {
+ .modalias = "ad9960-spi",
+ .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 1,
+ .controller_data = &ad9960_spi_chip_info,
+ },
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+ {
+ .modalias = "spi_mmc_dummy",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = 7,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+ {
+ .modalias = "spi_mmc",
+ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 0,
+ .chip_select = CONFIG_SPI_MMC_CS_CHAN,
+ .platform_data = NULL,
+ .controller_data = &spi_mmc_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+ .name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+ {
+ .start = 0x20200300,
+ .end = 0x20200300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF14,
+ .end = IRQ_PF14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+ {
+ .start = 0x20308000,
+ .end = 0x20308000,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0x20308004,
+ .end = 0x20308004,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PG15,
+ .end = IRQ_PG15,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+ .sel15Kres = 1,
+ .clknotstop = 0,
+ .oc_enable = 0,
+ .int_act_high = 0,
+ .int_edge_triggered = 0,
+ .remote_wakeup_connected = 0,
+ .no_power_switching = 1,
+ .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+ .name = "isp1362-hcd",
+ .id = 0,
+ .dev = {
+ .platform_data = &isp1362_priv,
+ },
+ .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+ .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20200000,
+ .end = 0x20200000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PH14,
+ .end = IRQ_PH14,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+ {
+ .name = "bootloader(nor)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor)",
+ .size = 0xE0000,
+ .offset = MTDPART_OFS_APPEND,
+ }, {
+ .name = "file system(nor)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+ .width = 2,
+ .parts = cm_partitions,
+ .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 };
+
+static struct resource cm_flash_resource[] = {
+ {
+ .name = "cfi_probe",
+ .start = 0x20000000,
+ .end = 0x201fffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = (unsigned long)cm_flash_gpios,
+ .end = ARRAY_SIZE(cm_flash_gpios),
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device cm_flash_device = {
+ .name = "gpio-addr-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &cm_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(cm_flash_resource),
+ .resource = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_BFIN_SIR1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir_resources),
+ .resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+ [0] = {
+ .start = TWI0_REGBASE,
+ .end = TWI0_REGBASE,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TWI,
+ .end = IRQ_TWI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+ .name = "i2c-bfin-twi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+ .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+ .name = "bfin-sport-uart",
+ .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+ .name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+ .ioport_shift = 2,
+ .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+ {
+ .start = 0x2030C000,
+ .end = 0x2030C01F,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x2030D018,
+ .end = 0x2030D01B,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = PATA_INT,
+ .end = PATA_INT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bfin_pata_device = {
+ .name = "pata_platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(bfin_pata_resources),
+ .resource = bfin_pata_resources,
+ .dev = {
+ .platform_data = &bfin_pata_platform_data,
+ }
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+ VRPAIR(VLEV_085, 250000000),
+ VRPAIR(VLEV_090, 376000000),
+ VRPAIR(VLEV_095, 426000000),
+ VRPAIR(VLEV_100, 426000000),
+ VRPAIR(VLEV_105, 476000000),
+ VRPAIR(VLEV_110, 476000000),
+ VRPAIR(VLEV_115, 476000000),
+ VRPAIR(VLEV_120, 500000000),
+ VRPAIR(VLEV_125, 533000000),
+ VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+ .tuple_tab = cclk_vlev_datasheet,
+ .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+ .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+ .name = "bfin dpmc",
+ .dev = {
+ .platform_data = &bfin_dmpc_vreg_data,
+ },
+};
+
+static struct platform_device *cm_bf537_devices[] __initdata = {
+
+ &bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+ &hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+ &bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+ &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+ &bfin_sport0_uart_device,
+ &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+ &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+ &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+ &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+ &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+ &cm_flash_device,
+#endif
+};
+
+static int __init cm_bf537_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+ platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+ irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+ return 0;
+}
+
+arch_initcall(cm_bf537_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+ random_ether_addr(addr);
+ printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise General-Purpose I/O Modules on BF537 */
- /* Rev 0.0 Anomaly 05000212 - PORTx_FER,
- * PORT_MUX Registers Do Not accept "writes" correctly:
- */
- p0.h = hi(BFIN_PORT_MUX);
- p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- W[P0] = R0.L; /* Enable both UARTS */
- SSYNC;
-
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = 0x000F(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- /* Enable peripheral function of PORTF for UART0 and UART1 */
- W[P0] = R0.L;
- SSYNC;
-
-#if !defined(CONFIG_BF534)
- p0.h = hi(EMAC_SYSTAT);
- p0.l = lo(EMAC_SYSTAT);
- R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
- R0.l = 0xFFFF;
- [P0] = R0;
- SSYNC;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = 4 * SIZE_1M,
.size = (256 - 4) * SIZE_1M,
},
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = 0x1c0000,
.offset = 0x40000
}
#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
static struct mtd_partition partition_info[] = {
{
- .name = "Linux Kernel",
+ .name = "linux kernel(nand)",
.offset = 0,
.size = 4 * SIZE_1M,
},
{
- .name = "File System",
+ .name = "file system(nand)",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
/* SPI flash chip (m25p16) */
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "linux kernel",
+ .name = "linux kernel(spi)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers*/
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers*/
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
- [p0] = R0;
- SSYNC;
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
- [p0] = R0;
- SSYNC;
-
- /* Initialize stack pointer */
- SP.L = LO(INITIAL_STACK);
- SP.H = HI(INITIAL_STACK);
- FP = SP;
- USP = SP;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_MBSCTL);
- p2.l = lo(EBIU_MBSCTL);
- r0.h = hi(CONFIG_EBIU_MBSCTLVAL);
- r0.l = lo(CONFIG_EBIU_MBSCTLVAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_MODE);
- p2.l = lo(EBIU_MODE);
- r0.h = hi(CONFIG_EBIU_MODEVAL);
- r0.l = lo(CONFIG_EBIU_MODEVAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_FCTL);
- p2.l = lo(EBIU_FCTL);
- r0.h = hi(CONFIG_EBIU_FCTLVAL);
- r0.l = lo(CONFIG_EBIU_FCTLVAL);
- [p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop;
- nop;
- nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- call _start_kernel;
-.L_exit:
- jump.s .L_exit;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
SSYNC;
#endif
- p0.h = hi(SIC_IWR0);
- p0.l = lo(SIC_IWR0);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
- .name = "bootloader",
+ .name = "bootloader(spi)",
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
}, {
- .name = "kernel",
+ .name = "linux kernel(spi)",
.size = 0xe0000,
.offset = 0x20000
}, {
- .name = "file system",
+ .name = "file system(spi)",
.size = 0x700000,
.offset = 0x00100000,
}
#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 119
+#define PATA_INT IRQ_PF46
static struct pata_platform_info bfin_pata_platform_data = {
.ioport_shift = 2,
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/ata_platform.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition ezkit_partitions[] = {
{
- .name = "Bootloader",
+ .name = "bootloader(nor)",
.size = 0x40000,
.offset = 0,
}, {
- .name = "Kernel",
+ .name = "linux kernel(nor)",
.size = 0x1C0000,
.offset = MTDPART_OFS_APPEND,
}, {
- .name = "RootFS",
+ .name = "file system(nor)",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
#endif
};
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT 55
-
-static struct pata_platform_info bfin_pata_platform_data = {
- .ioport_shift = 1,
- .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
- {
- .start = 0x20314020,
- .end = 0x2031403F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = 0x2031401C,
- .end = 0x2031401F,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = PATA_INT,
- .end = PATA_INT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device bfin_pata_device = {
- .name = "pata_platform",
- .id = -1,
- .num_resources = ARRAY_SIZE(bfin_pata_resources),
- .resource = bfin_pata_resources,
- .dev = {
- .platform_data = &bfin_pata_platform_data,
- }
-};
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
&bfin_sir_device,
#endif
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- &bfin_pata_device,
-#endif
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&bfin_device_gpiokeys,
#endif
#endif
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
- irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
return 0;
}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach-common/clocks.h>
#include <asm/mach/mem_init.h>
#endif
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOGA_CTL);
- p0.h = hi(WDOGA_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
p0.h = hi(SICA_IWR0);
p0.l = lo(SICA_IWR0);
#include <linux/irq.h>
#include <asm/blackfin.h>
-void program_IAR(void)
+void __init program_IAR(void)
{
/* Program the IAR0 Register with the configured priority */
bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
#
obj-y := \
- cache.o cacheinit.o entry.o \
- interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o
+ cache.o entry.o head.o \
+ interrupt.o irqpanic.o arch_checks.o ints-priority.o
+obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o
obj-$(CONFIG_PM) += pm.o dpmc_modes.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+#include <asm/fixed_code.h>
#include <asm/mach/anomaly.h>
#include <asm/mach-common/clocks.h>
# endif
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#if CONFIG_BOOT_LOAD < FIXED_CODE_END
+# error "The kernel load address must be after the fixed code section"
+#endif
+
+#if (CONFIG_BOOT_LOAD & 0x3)
+# error "The kernel load address must be 4 byte aligned"
+#endif
#include <asm/cache.h>
.text
-.align 2
-ENTRY(_cache_invalidate)
-
- /*
- * Icache or DcacheA or DcacheB Invalidation
- * or any combination thereof
- * R0 has bits
- * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P
- * set as required
- */
- [--SP] = R7;
-
- R7 = R0;
- CC = BITTST(R7,CPLB_ENABLE_ICACHE_P);
- IF !CC JUMP .Lno_icache;
- [--SP] = RETS;
- CALL _icache_invalidate;
- RETS = [SP++];
-.Lno_icache:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE_P);
- IF !CC JUMP .Lno_dcache_a;
- R0 = 0; /* specifies bank A */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_a:
- CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P);
- IF !CC JUMP .Lno_dcache_b;
- R0 = 0;
- BITSET(R0, 23); /* specifies bank B */
- [--SP] = RETS;
- CALL _dcache_invalidate;
- RETS = [SP++];
-.Lno_dcache_b:
- R7 = [SP++];
- RTS;
-ENDPROC(_cache_invalidate)
-
-/* Invalidate the Entire Instruction cache by
- * disabling IMC bit
- */
-ENTRY(_icache_invalidate)
-ENTRY(_invalidate_entire_icache)
- [--SP] = ( R7:5);
-
- P0.L = LO(IMEM_CONTROL);
- P0.H = HI(IMEM_CONTROL);
- R7 = [P0];
-
- /* Clear the IMC bit , All valid bits in the instruction
- * cache are set to the invalid state
- */
- BITCLR(R7,IMC_P);
- CLI R6;
- SSYNC; /* SSYNC required before invalidating cache. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the instruction cache agian */
- R6 = (IMC | ENICPLB);
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:5) = [SP++];
- RTS;
-ENDPROC(_invalidate_entire_icache)
-ENDPROC(_icache_invalidate)
/*
* blackfin_cache_flush_range(start, end)
RTS;
ENDPROC(_blackfin_dcache_invalidate_range)
-/* Invalidate the Entire Data cache by
- * clearing DMC[1:0] bits
- */
-ENTRY(_invalidate_entire_dcache)
-ENTRY(_dcache_invalidate)
- [--SP] = ( R7:6);
-
- P0.L = LO(DMEM_CONTROL);
- P0.H = HI(DMEM_CONTROL);
- R7 = [P0];
-
- /* Clear the DMC[1:0] bits, All valid bits in the data
- * cache are set to the invalid state
- */
- BITCLR(R7,DMC0_P);
- BITCLR(R7,DMC1_P);
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- /* Configures the data cache again */
-
- R6 = DMEM_CNTR;
- R7 = R7 | R6;
-
- CLI R6;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R7;
- SSYNC;
- STI R6;
-
- ( R7:6) = [SP++];
- RTS;
-ENDPROC(_dcache_invalidate)
-ENDPROC(_invalidate_entire_dcache)
-
ENTRY(_blackfin_dcache_flush_range)
R2 = -L1_CACHE_BYTES;
R2 = R0 & R2;
+++ /dev/null
-/*
- * File: arch/blackfin/mach-common/cacheinit.S
- * Based on:
- * Author: LG Soft India
- *
- * Created: ?
- * Description: cache initialization
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-/* This function sets up the data and instruction cache. The
- * tables like icplb table, dcplb table and Page Descriptor table
- * are defined in cplbtab.h. You can configure those tables for
- * your suitable requirements
- */
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-.text
-
-#if ANOMALY_05000125
-#if defined(CONFIG_BFIN_ICACHE)
-ENTRY(_bfin_write_IMEM_CONTROL)
-
- /* Enable Instruction Cache */
- P0.l = LO(IMEM_CONTROL);
- P0.h = HI(IMEM_CONTROL);
-
- /* Anomaly 05000125 */
- CLI R1;
- SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
- .align 8;
- [P0] = R0;
- SSYNC;
- STI R1;
- RTS;
-
-ENDPROC(_bfin_write_IMEM_CONTROL)
-#endif
-
-#if defined(CONFIG_BFIN_DCACHE)
-ENTRY(_bfin_write_DMEM_CONTROL)
- P0.l = LO(DMEM_CONTROL);
- P0.h = HI(DMEM_CONTROL);
-
- CLI R1;
- SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
- .align 8;
- [P0] = R0;
- SSYNC;
- STI R1;
- RTS;
-
-ENDPROC(_bfin_write_DMEM_CONTROL)
-#endif
-
-#endif
jump .Lforever;
ENDPROC(_hibernate_mode)
-ENTRY(_deep_sleep)
- [--SP] = ( R7:0, P5:0 );
- [--SP] = RETS;
-
- CLI R4;
-
- R0 = IWR_ENABLE(0);
- R1 = IWR_DISABLE_ALL;
- R2 = IWR_DISABLE_ALL;
-
- call _set_sic_iwr;
-
- call _set_dram_srfs;
-
- /* Clear all the interrupts,bits sticky */
- R0 = 0xFFFF (Z);
- call _set_rtc_istat
-
- P0.H = hi(PLL_CTL);
- P0.L = lo(PLL_CTL);
- R0 = W[P0](z);
- BITSET (R0, 5);
- W[P0] = R0.L;
-
- call _test_pll_locked;
-
- SSYNC;
- IDLE;
-
- call _unset_dram_srfs;
-
- call _test_pll_locked;
-
- R0 = IWR_ENABLE(0);
- R1 = IWR_DISABLE_ALL;
- R2 = IWR_DISABLE_ALL;
-
- call _set_sic_iwr;
-
- P0.H = hi(PLL_CTL);
- P0.L = lo(PLL_CTL);
- R0 = w[p0](z);
- BITCLR (R0, 3);
- BITCLR (R0, 5);
- BITCLR (R0, 8);
- w[p0] = R0;
- IDLE;
- call _test_pll_locked;
-
- STI R4;
-
- RETS = [SP++];
- ( R7:0, P5:0 ) = [SP++];
- RTS;
-ENDPROC(_deep_sleep)
-
ENTRY(_sleep_deeper)
[--SP] = ( R7:0, P5:0 );
[--SP] = RETS;
cc = r7 == r6;
if cc jump _bfin_return_from_exception;
+#ifdef CONFIG_KGDB
/* Don't do single step in hardware exception handler */
p5.l = lo(IPEND);
p5.h = hi(IPEND);
r6 = [p5];
+ cc = bittst(r6, 4);
+ if cc jump _bfin_return_from_exception;
cc = bittst(r6, 5);
if cc jump _bfin_return_from_exception;
-#ifdef CONFIG_KGDB
/* skip single step if current interrupt priority is higher than
* that of the first instruction, from which gdb starts single step */
r6 >>= 6;
if cc jump .Ldo_single_step;
r6 += -1;
cc = r6 < r7;
- if cc jump _bfin_return_from_exception;
+ if cc jump 1f;
.Ldo_single_step:
-#endif
-
+#else
/* If we were in user mode, do the single step normally. */
+ p5.l = lo(IPEND);
+ p5.h = hi(IPEND);
r6 = [p5];
r7 = 0xffe0 (z);
r7 = r7 & r6;
cc = r7 == 0;
- if cc jump 1f;
+ if !cc jump 1f;
+#endif
+ /* Single stepping only a single instruction, so clear the trace
+ * bit here. */
+ r7 = syscfg;
+ bitclr (r7, 0);
+ syscfg = R7;
+ jump _ex_trap_c;
+
+1:
/*
* We were in an interrupt handler. By convention, all of them save
* SYSCFG with their first instruction, so by checking whether our
cc = R7 == R6;
if !cc jump _bfin_return_from_exception;
-1:
- /* Single stepping only a single instruction, so clear the trace
- * bit here. */
r7 = syscfg;
bitclr (r7, 0);
syscfg = R7;
- jump _ex_trap_c;
-
+ /* Fall through to _bfin_return_from_exception. */
ENDPROC(_ex_single_step)
ENTRY(_bfin_return_from_exception)
.long _sys_semtimedop
.long _sys_timerfd_settime
.long _sys_timerfd_gettime
+ .long _sys_signalfd4 /* 360 */
+ .long _sys_eventfd2
+ .long _sys_epoll_create1
+ .long _sys_dup3
+ .long _sys_pipe2
+ .long _sys_inotify_init1 /* 365 */
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
--- /dev/null
+/*
+ * Common Blackfin startup code
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/thread_info.h>
+#include <asm/trace.h>
+
+__INIT
+
+#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(__start)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
+ R0 = 0;
+
+ /* Clear Out All the data and pointer Registers */
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers */
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ trace_buffer_init(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
+ /* Turn off the icache */
+ p0.l = LO(IMEM_CONTROL);
+ p0.h = HI(IMEM_CONTROL);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Turn off the dcache */
+ p0.l = LO(DMEM_CONTROL);
+ p0.h = HI(DMEM_CONTROL);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Save RETX, in case of doublefault */
+ p0.l = ___retx;
+ p0.h = ___retx;
+ R0 = RETX;
+ [P0] = R0;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+#ifdef CONFIG_EARLY_PRINTK
+ call _init_early_exception_vectors;
+#endif
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if ANOMALY_05000281
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+ENDPROC(__start)
+
+/* A little BF561 glue ... */
+#ifndef WDOG_CTL
+# define WDOG_CTL WDOGA_CTL
+#endif
+
+ENTRY(_real_start)
+ /* Enable nested interrupts */
+ [--sp] = reti;
+
+ /* watchdog off for now */
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0;
+ ssync;
+
+ /* Zero out the bss region
+ * Note: this will fail if bss is 0 bytes ...
+ */
+ r0 = 0 (z);
+ r1.l = ___bss_start;
+ r1.h = ___bss_start;
+ r2.l = ___bss_stop;
+ r2.h = ___bss_stop;
+ r2 = r2 - r1;
+ r2 >>= 2;
+ p1 = r1;
+ p2 = r2;
+ lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
+.L_clear_bss:
+ [p1++] = r0;
+
+ /* In case there is a NULL pointer reference,
+ * zero out region before stext
+ */
+ p1 = r0;
+ r2.l = __stext;
+ r2.h = __stext;
+ r2 >>= 2;
+ p2 = r2;
+ lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
+.L_clear_zero:
+ [p1++] = r0;
+
+ /* Pass the u-boot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ /* Load the current thread pointer and stack */
+ sp.l = _init_thread_union;
+ sp.h = _init_thread_union;
+ p1 = THREAD_SIZE (z);
+ sp = sp + p1;
+ usp = sp;
+ fp = sp;
+ jump.l _start_kernel;
+ENDPROC(_real_start)
+
+__FINIT
#ifdef CONFIG_PM
unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */
+unsigned vr_wakeup;
#endif
struct ivgx {
#ifdef CONFIG_PM
int bfin_internal_set_wake(unsigned int irq, unsigned int state)
{
- unsigned bank, bit;
+ unsigned bank, bit, wakeup = 0;
unsigned long flags;
bank = SIC_SYSIRQ(irq) / 32;
bit = SIC_SYSIRQ(irq) % 32;
+ switch (irq) {
+#ifdef IRQ_RTC
+ case IRQ_RTC:
+ wakeup |= WAKE;
+ break;
+#endif
+#ifdef IRQ_CAN0_RX
+ case IRQ_CAN0_RX:
+ wakeup |= CANWE;
+ break;
+#endif
+#ifdef IRQ_CAN1_RX
+ case IRQ_CAN1_RX:
+ wakeup |= CANWE;
+ break;
+#endif
+#ifdef IRQ_USB_INT0
+ case IRQ_USB_INT0:
+ wakeup |= USBWE;
+ break;
+#endif
+#ifdef IRQ_KEY
+ case IRQ_KEY:
+ wakeup |= KPADWE;
+ break;
+#endif
+#ifdef IRQ_CNT
+ case IRQ_CNT:
+ wakeup |= ROTWE;
+ break;
+#endif
+ default:
+ break;
+ }
+
local_irq_save(flags);
- if (state)
+ if (state) {
bfin_sic_iwr[bank] |= (1 << bit);
- else
+ vr_wakeup |= wakeup;
+
+ } else {
bfin_sic_iwr[bank] &= ~(1 << bit);
+ vr_wakeup &= ~wakeup;
+ }
local_irq_restore(flags);
local_irq_disable();
+#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+ /* Clear EMAC Interrupt Status bits so we can demux it later */
+ bfin_write_EMAC_SYSTAT(-1);
+#endif
+
#ifdef CONFIG_BF54x
# ifdef CONFIG_PINTx_REASSIGN
pint[0]->assign = CONFIG_PINT0_ASSIGN;
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR(IWR_DISABLE_ALL);
#endif
return 0;
*/
#include <linux/linkage.h>
-#include <asm/cplb.h>
#include <asm/blackfin.h>
.text
-#ifdef CONFIG_BFIN_ICACHE_LOCK
-
/* When you come here, it is assumed that
* R0 - Which way to be locked
*/
RTS;
ENDPROC(_cache_lock)
-#endif /* BFIN_ICACHE_LOCK */
-
-/* Return the ILOC bits of IMEM_CONTROL
+/* Invalidate the Entire Instruction cache by
+ * disabling IMC bit
*/
+ENTRY(_invalidate_entire_icache)
+ [--SP] = ( R7:5);
-ENTRY(_read_iloc)
- P1.H = HI(IMEM_CONTROL);
- P1.L = LO(IMEM_CONTROL);
- R1 = 0xF;
- R0 = [P1];
- R0 = R0 >> 3;
- R0 = R0 & R1;
+ P0.L = LO(IMEM_CONTROL);
+ P0.H = HI(IMEM_CONTROL);
+ R7 = [P0];
+
+ /* Clear the IMC bit , All valid bits in the instruction
+ * cache are set to the invalid state
+ */
+ BITCLR(R7,IMC_P);
+ CLI R6;
+ SSYNC; /* SSYNC required before invalidating cache. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+
+ /* Configures the instruction cache agian */
+ R6 = (IMC | ENICPLB);
+ R7 = R7 | R6;
+
+ CLI R6;
+ SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
+ .align 8;
+ [P0] = R7;
+ SSYNC;
+ STI R6;
+ ( R7:5) = [SP++];
RTS;
-ENDPROC(_read_iloc)
+ENDPROC(_invalidate_entire_icache)
bfin_pm_standby_restore();
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561)
- bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
- bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR0(IWR_DISABLE_ALL);
+#if defined(CONFIG_BF52x)
+ /* BF52x system reset does not properly reset SIC_IWR1 which
+ * will screw up the bootrom as it relies on MDMA0/1 waking it
+ * up from IDLE instructions. See this report for more info:
+ * http://blackfin.uclinux.org/gf/tracker/4323
+ */
+ bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
+#else
+ bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
+#endif
# ifdef CONFIG_BF54x
- bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
# endif
#else
- bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR(IWR_DISABLE_ALL);
#endif
local_irq_restore(flags);
wakeup = bfin_read_VR_CTL() & ~FREQ;
wakeup |= SCKELOW;
- /* FIXME: merge this somehow with set_irq_wake */
-#ifdef CONFIG_PM_BFIN_WAKE_RTC
- wakeup |= WAKE;
-#endif
#ifdef CONFIG_PM_BFIN_WAKE_PH6
wakeup |= PHYWE;
#endif
-#ifdef CONFIG_PM_BFIN_WAKE_CAN
- wakeup |= CANWE;
-#endif
#ifdef CONFIG_PM_BFIN_WAKE_GP
wakeup |= GPWE;
#endif
-#ifdef CONFIG_PM_BFIN_WAKE_USB
- wakeup |= USBWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
- wakeup |= KPADWE;
-#endif
-#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
- wakeup |= ROTWE;
-#endif
local_irq_save(flags);
icache_disable();
bf53x_suspend_l1_mem(memptr);
- do_hibernate(wakeup); /* Goodbye */
+ do_hibernate(wakeup | vr_wakeup); /* Goodbye */
bf53x_resume_l1_mem(memptr);
static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
static struct sram_piece free_l2_sram_head, used_l2_sram_head;
#endif
static void __init l2_sram_init(void)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
free_l2_sram_head.next =
kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
if (!free_l2_sram_head.next) {
&& addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
return l1_data_B_sram_free(addr);
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
else if (addr >= (void *)L2_START
&& addr < (void *)(L2_START + L2_LENGTH))
return l2_sram_free(addr);
void *l2_sram_alloc(size_t size)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
unsigned flags;
void *addr;
int l2_sram_free(const void *addr)
{
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
unsigned flags;
int ret;
&free_l1_inst_sram_head, &used_l1_inst_sram_head))
goto not_done;
#endif
-#ifdef L2_LENGTH
+#if L2_LENGTH != 0
if (_sram_proc_read(buf, &len, count, "L2",
&free_l2_sram_head, &used_l2_sram_head))
goto not_done;
#include <asm/irq.h>
#include <asm/system.h>
-#include <linux/version.h>
-
#include <hwregs/reg_map.h>
#include <hwregs/reg_rdwr.h>
#include <hwregs/timer_defs.h>
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
data8 sys_uselib
data8 sys_swapon
data8 sys_reboot
- data8 sys32_readdir
+ data8 compat_sys_old_readdir
data8 sys32_mmap /* 90 */
data8 sys32_munmap
data8 sys_truncate
} _sifields;
} compat_siginfo_t;
-struct old_linux32_dirent {
- u32 d_ino;
- u32 d_offset;
- u16 d_namlen;
- char d_name[1];
-};
-
/*
* IA-32 ELF specific definitions for IA-64.
*/
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}
-struct getdents32_callback {
- struct compat_dirent __user *current_dir;
- struct compat_dirent __user *previous;
- int count;
- int error;
-};
-
-struct readdir32_callback {
- struct old_linux32_dirent __user * dirent;
- int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
- unsigned int d_type)
-{
- struct compat_dirent __user * dirent;
- struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
- int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
- u32 d_ino;
-
- buf->error = -EINVAL; /* only used if we fail.. */
- if (reclen > buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->error = -EFAULT; /* only used if we fail.. */
- dirent = buf->previous;
- if (dirent)
- if (put_user(offset, &dirent->d_off))
- return -EFAULT;
- dirent = buf->current_dir;
- buf->previous = dirent;
- if (put_user(d_ino, &dirent->d_ino)
- || put_user(reclen, &dirent->d_reclen)
- || copy_to_user(dirent->d_name, name, namlen)
- || put_user(0, dirent->d_name + namlen))
- return -EFAULT;
- dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
- buf->current_dir = dirent;
- buf->count -= reclen;
- return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
- struct file * file;
- struct compat_dirent __user * lastdirent;
- struct getdents32_callback buf;
- int error;
-
- error = -EFAULT;
- if (!access_ok(VERIFY_WRITE, dirent, count))
- goto out;
-
- error = -EBADF;
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.current_dir = dirent;
- buf.previous = NULL;
- buf.count = count;
- buf.error = 0;
-
- error = vfs_readdir(file, filldir32, &buf);
- if (error < 0)
- goto out_putf;
- error = buf.error;
- lastdirent = buf.previous;
- if (lastdirent) {
- if (put_user(file->f_pos, &lastdirent->d_off))
- error = -EFAULT;
- else
- error = count - buf.count;
- }
-
-out_putf:
- fput(file);
-out:
- return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
- unsigned int d_type)
-{
- struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
- struct old_linux32_dirent __user * dirent;
- u32 d_ino;
-
- if (buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->count++;
- dirent = buf->dirent;
- if (put_user(d_ino, &dirent->d_ino)
- || put_user(offset, &dirent->d_offset)
- || put_user(namlen, &dirent->d_namlen)
- || copy_to_user(dirent->d_name, name, namlen)
- || put_user(0, dirent->d_name + namlen))
- return -EFAULT;
- return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
- int error;
- struct file * file;
- struct readdir32_callback buf;
-
- error = -EBADF;
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.count = 0;
- buf.dirent = dirent;
-
- error = vfs_readdir(file, fillonedir32, &buf);
- if (error >= 0)
- error = buf.count;
- fput(file);
-out:
- return error;
-}
-
struct sel_arg_struct {
unsigned int n;
unsigned int inp;
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
+#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096)
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_IA_64
unsigned int count;
} __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
#define IPI_CALL_FUNC 0
#define IPI_CPU_STOP 1
void
smp_flush_tlb_cpumask(cpumask_t xcpumask)
{
- unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+ unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
cpumask_t cpumask = xcpumask;
int mycpu, cpu, flush_mycpu = 0;
mycpu = smp_processor_id();
for_each_cpu_mask(cpu, cpumask)
- counts[cpu] = local_tlb_flush_counts[cpu].count;
+ counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
mb();
for_each_cpu_mask(cpu, cpumask) {
smp_local_flush_tlb();
for_each_cpu_mask(cpu, cpumask)
- while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+ while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
udelay(FLUSH_DELAY);
preempt_enable();
struct pci_bus * __devinit
pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
{
- struct pci_root_info info;
struct pci_controller *controller;
unsigned int windows = 0;
struct pci_bus *pbus;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
&windows);
if (windows) {
+ struct pci_root_info info;
+
controller->window =
kmalloc_node(sizeof(*controller->window) * windows,
GFP_KERNEL, controller->node);
if (!controller->window)
goto out2;
- }
- name = kmalloc(16, GFP_KERNEL);
- if (!name)
- goto out3;
+ name = kmalloc(16, GFP_KERNEL);
+ if (!name)
+ goto out3;
- sprintf(name, "PCI Bus %04x:%02x", domain, bus);
- info.controller = controller;
- info.name = name;
- acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
- &info);
+ sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+ info.controller = controller;
+ info.name = name;
+ acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+ add_window, &info);
+ }
/*
* See arch/x86/pci/acpi.c.
* The desired pci bus might already be scanned in a quirk. We
#define SUPPORT_SYSRQ
#endif
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/serial.h>
#include <linux/circ_buf.h>
};
int h_get_mpp(struct hvcall_mpp_data *);
+
+#ifdef CONFIG_PPC_PSERIES
+extern int CMO_PrPSP;
+extern int CMO_SecPSP;
+extern unsigned long CMO_PageSize;
+
+static inline int cmo_get_primary_psp(void)
+{
+ return CMO_PrPSP;
+}
+
+static inline int cmo_get_secondary_psp(void)
+{
+ return CMO_SecPSP;
+}
+
+static inline unsigned long cmo_get_page_size(void)
+{
+ return CMO_PageSize;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_HVCALL_H */
#ifndef _ASM_POWERPC_IDE_H
#define _ASM_POWERPC_IDE_H
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
+#include <linux/compiler.h>
#include <asm/io.h>
#define __ide_mm_insw(p, a, c) readsw((void __iomem *)(p), (a), (c))
#define __ide_mm_outsw(p, a, c) writesw((void __iomem *)(p), (a), (c))
#define __ide_mm_outsl(p, a, c) writesl((void __iomem *)(p), (a), (c))
-#ifndef __powerpc64__
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
- switch (base) {
- case 0x1f0: return 14;
- case 0x170: return 15;
- }
-#endif
- return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
- switch (index) {
- case 0: return 0x1f0;
- case 1: return 0x170;
- }
-#endif
- return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR 1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
#endif /* _ASM_POWERPC_IDE_H */
#define TRACE_ENABLE_INTS bl .trace_hardirqs_on
#define TRACE_DISABLE_INTS bl .trace_hardirqs_off
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
- cmpdi en, 0; \
+ cmpdi en,0; \
bne 95f; \
stb en,PACASOFTIRQEN(r13); \
bl .trace_hardirqs_off; \
li en,1;
#define TRACE_AND_RESTORE_IRQ(en) \
TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
-96: stb en,PACASOFTIRQEN(r13)
+ stb en,PACASOFTIRQEN(r13); \
+96:
#else
#define TRACE_ENABLE_INTS
#define TRACE_DISABLE_INTS
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
#endif
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#ifdef __powerpc64__
static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
{
mm->context.id = NO_CONTEXT;
- mm->context.vdso_base = 0;
return 0;
}
SYSCALL(uselib)
SYSCALL(swapon)
SYSCALL(reboot)
-SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
SYSCALL_SPU(mmap)
SYSCALL_SPU(munmap)
SYSCALL_SPU(truncate)
}
__setup("savemaxmem=", parse_savemaxmem);
+
+static size_t copy_oldmem_vaddr(void *vaddr, char *buf, size_t csize,
+ unsigned long offset, int userbuf)
+{
+ if (userbuf) {
+ if (copy_to_user((char __user *)buf, (vaddr + offset), csize))
+ return -EFAULT;
+ } else
+ memcpy(buf, (vaddr + offset), csize);
+
+ return csize;
+}
+
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
if (!csize)
return 0;
- vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+ csize = min(csize, PAGE_SIZE);
- if (userbuf) {
- if (copy_to_user((char __user *)buf, (vaddr + offset), csize)) {
- iounmap(vaddr);
- return -EFAULT;
- }
- } else
- memcpy(buf, (vaddr + offset), csize);
+ if (pfn < max_pfn) {
+ vaddr = __va(pfn << PAGE_SHIFT);
+ csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+ } else {
+ vaddr = __ioremap(pfn << PAGE_SHIFT, PAGE_SIZE, 0);
+ csize = copy_oldmem_vaddr(vaddr, buf, csize, offset, userbuf);
+ iounmap(vaddr);
+ }
- iounmap(vaddr);
return csize;
}
lis r10, 0x40
1: addic. r10, r10, -0x1000
tlbie r10
- blt 1b
+ bgt 1b
sync
blr
}
EXPORT_SYMBOL(ibmebus_free_irq);
-static ssize_t name_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "%s\n", to_of_device(dev)->node->name);
-}
-
-static struct device_attribute ibmebus_dev_attrs[] = {
- __ATTR_RO(name),
- __ATTR_NULL
-};
-
static char *ibmebus_chomp(const char *in, size_t count)
{
char *out = kmalloc(count + 1, GFP_KERNEL);
struct bus_type ibmebus_bus_type = {
.uevent = of_device_uevent,
- .dev_attrs = ibmebus_dev_attrs,
.bus_attrs = ibmebus_bus_attrs
};
EXPORT_SYMBOL(ibmebus_bus_type);
unsigned long cmo_faults = 0;
unsigned long cmo_fault_time = 0;
+ seq_printf(m, "cmo_enabled=%d\n", firmware_has_feature(FW_FEATURE_CMO));
+
if (!firmware_has_feature(FW_FEATURE_CMO))
return;
seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
seq_printf(m, "cmo_fault_time_usec=%lu\n",
cmo_fault_time / tb_ticks_per_usec);
+ seq_printf(m, "cmo_primary_psp=%d\n", cmo_get_primary_psp());
+ seq_printf(m, "cmo_secondary_psp=%d\n", cmo_get_secondary_psp());
+ seq_printf(m, "cmo_page_size=%lu\n", cmo_get_page_size());
}
static int pseries_lparcfg_data(struct seq_file *m, void *v)
relocate_new_kernel_size);
flush_icache_range(reboot_code_buffer,
- reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
+ reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
/* now call it */
/* set a new stack at the bottom of our page... */
/* (not really needed now) */
- addi r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
+ addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */
stw r0, 0(r1)
/* Do the copies */
{
module_bug_cleanup(mod);
}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
- struct mod_arch_specific *mod;
- unsigned int i;
- struct bug_entry *bug;
-
- list_for_each_entry(mod, &module_bug_list, bug_list) {
- bug = mod->bug_table;
- for (i = 0; i < mod->num_bugs; ++i, ++bug)
- if (bugaddr == bug->bug_addr)
- return bug;
- }
- return NULL;
-}
#include <asm/ppc-pci.h>
#include <asm/syscalls.h>
-struct old_linux_dirent32 {
- u32 d_ino;
- u32 d_offset;
- unsigned short d_namlen;
- char d_name[1];
-};
-
-struct readdir_callback32 {
- struct old_linux_dirent32 __user * dirent;
- int count;
-};
-
-static int fillonedir(void * __buf, const char * name, int namlen,
- off_t offset, u64 ino, unsigned int d_type)
-{
- struct readdir_callback32 * buf = (struct readdir_callback32 *) __buf;
- struct old_linux_dirent32 __user * dirent;
- ino_t d_ino;
-
- if (buf->count)
- return -EINVAL;
- d_ino = ino;
- if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
- return -EOVERFLOW;
- buf->count++;
- dirent = buf->dirent;
- put_user(d_ino, &dirent->d_ino);
- put_user(offset, &dirent->d_offset);
- put_user(namlen, &dirent->d_namlen);
- copy_to_user(dirent->d_name, name, namlen);
- put_user(0, dirent->d_name + namlen);
- return 0;
-}
-
-asmlinkage int old32_readdir(unsigned int fd, struct old_linux_dirent32 __user *dirent, unsigned int count)
-{
- int error = -EBADF;
- struct file * file;
- struct readdir_callback32 buf;
-
- file = fget(fd);
- if (!file)
- goto out;
-
- buf.count = 0;
- buf.dirent = dirent;
-
- error = vfs_readdir(file, (filldir_t)fillonedir, &buf);
- if (error < 0)
- goto out_putf;
- error = buf.count;
-
-out_putf:
- fput(file);
-out:
- return error;
-}
asmlinkage long ppc32_select(u32 n, compat_ulong_t __user *inp,
compat_ulong_t __user *outp, compat_ulong_t __user *exp,
return error;
}
error = viodrv->probe(viodev, id);
- if (error)
+ if (error && firmware_has_feature(FW_FEATURE_CMO))
vio_cmo_bus_remove(viodev);
}
(SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE);
if (runcntl == 0)
runcntl = SPU_RUNCNTL_RUNNABLE;
- }
-
- if (ctx->flags & SPU_CREATE_NOSCHED) {
- spuctx_switch_state(ctx, SPU_UTIL_USER);
- ctx->ops->runcntl_write(ctx, runcntl);
} else {
unsigned long privcntl;
else
privcntl = SPU_PRIVCNTL_MODE_NORMAL;
- ctx->ops->npc_write(ctx, *npc);
ctx->ops->privcntl_write(ctx, privcntl);
- ctx->ops->runcntl_write(ctx, runcntl);
+ ctx->ops->npc_write(ctx, *npc);
+ }
+
+ ctx->ops->runcntl_write(ctx, runcntl);
+
+ if (ctx->flags & SPU_CREATE_NOSCHED) {
+ spuctx_switch_state(ctx, SPU_UTIL_USER);
+ } else {
if (ctx->state == SPU_STATE_SAVED) {
ret = spu_activate(ctx, 0);
if (tmp && tmp->prio > ctx->prio &&
!(tmp->flags & SPU_CREATE_NOSCHED) &&
- (!victim || tmp->prio > victim->prio))
+ (!victim || tmp->prio > victim->prio)) {
victim = spu->ctx;
+ get_spu_context(victim);
+ }
}
mutex_unlock(&cbe_spu_info[node].list_mutex);
* look at another context or give up after X retries.
*/
if (!mutex_trylock(&victim->state_mutex)) {
+ put_spu_context(victim);
victim = NULL;
goto restart;
}
* restart the search.
*/
mutex_unlock(&victim->state_mutex);
+ put_spu_context(victim);
victim = NULL;
goto restart;
}
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
+ put_spu_context(victim);
return spu;
}
struct spu_context *ctx = spu->ctx;
if (ctx) {
+ get_spu_context(ctx);
mutex_unlock(mtx);
spusched_tick(ctx);
mutex_lock(mtx);
+ put_spu_context(ctx);
}
}
mutex_unlock(mtx);
node = spu->node;
if (old_state == SPU_UTIL_USER)
atomic_dec(&cbe_spu_info[node].busy_spus);
- if (new_state == SPU_UTIL_USER);
+ if (new_state == SPU_UTIL_USER)
atomic_inc(&cbe_spu_info[node].busy_spus);
}
}
#define _PSERIES_PLPAR_WRAPPERS_H
#include <asm/hvcall.h>
+#include <asm/page.h>
static inline long poll_pending(void)
{
static inline long plpar_page_set_loaned(unsigned long vpa)
{
- return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+ unsigned long cmo_page_sz = cmo_get_page_size();
+ long rc = 0;
+ int i;
+
+ for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+ rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa + i, 0);
+
+ for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+ plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE,
+ vpa + i - cmo_page_sz, 0);
+
+ return rc;
}
static inline long plpar_page_set_active(unsigned long vpa)
{
- return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+ unsigned long cmo_page_sz = cmo_get_page_size();
+ long rc = 0;
+ int i;
+
+ for (i = 0; !rc && i < PAGE_SIZE; i += cmo_page_sz)
+ rc = plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa + i, 0);
+
+ for (i -= cmo_page_sz; rc && i != 0; i -= cmo_page_sz)
+ plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED,
+ vpa + i - cmo_page_sz, 0);
+
+ return rc;
}
extern void vpa_init(int cpu);
#include "plpar_wrappers.h"
#include "pseries.h"
+int CMO_PrPSP = -1;
+int CMO_SecPSP = -1;
+unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
int fwnmi_active; /* TRUE if an FWNMI handler is present */
{
char *ptr, *key, *value, *end;
int call_status;
- int PrPSP = -1;
- int SecPSP = -1;
+ int page_order = IOMMU_PAGE_SHIFT;
pr_debug(" -> fw_cmo_feature_init()\n");
spin_lock(&rtas_data_buf_lock);
break;
}
- if (0 == strcmp(key, "PrPSP"))
- PrPSP = simple_strtol(value, NULL, 10);
+ if (0 == strcmp(key, "CMOPageSize"))
+ page_order = simple_strtol(value, NULL, 10);
+ else if (0 == strcmp(key, "PrPSP"))
+ CMO_PrPSP = simple_strtol(value, NULL, 10);
else if (0 == strcmp(key, "SecPSP"))
- SecPSP = simple_strtol(value, NULL, 10);
+ CMO_SecPSP = simple_strtol(value, NULL, 10);
value = key = ptr + 1;
}
ptr++;
}
- if (PrPSP != -1 || SecPSP != -1) {
+ /* Page size is returned as the power of 2 of the page size,
+ * convert to the page size in bytes before returning
+ */
+ CMO_PageSize = 1 << page_order;
+ pr_debug("CMO_PageSize = %lu\n", CMO_PageSize);
+
+ if (CMO_PrPSP != -1 || CMO_SecPSP != -1) {
pr_info("CMO enabled\n");
- pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+ pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+ CMO_SecPSP);
powerpc_firmware_features |= FW_FEATURE_CMO;
} else
- pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+ pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP,
+ CMO_SecPSP);
spin_unlock(&rtas_data_buf_lock);
pr_debug(" <- fw_cmo_feature_init()\n");
}
*
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
# CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
#
# Misc
# CONFIG_IPL_TAPE is not set
CONFIG_IPL_VM=y
CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PROCESS_DEBUG is not set
CONFIG_KEXEC=y
# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
CONFIG_SYS_HYPERVISOR=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
# CONFIG_WAN is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_R3964 is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_S390_VMUR=m
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=m
CONFIG_CRC7=m
* __ffz_word returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = __ffz_word(0, *p >> bit) + bit;
+ set = __ffz_word(bit, *p >> bit);
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
* s390 version of ffz returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
+ set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
* s390 version of ffz returns __BITOPS_WORDSIZE
* if no zero bit is present in the word.
*/
- set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
+ set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
if (set >= size)
return size + offset;
if (set < __BITOPS_WORDSIZE)
#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
/* Allocate one page for the pdp and the second for the code */
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_S390
return sf->gprs[8];
}
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+ .lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
static int s390_idle_enter(void)
{
if (IS_ERR(p))
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
current_set[cpu] = p;
- spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
}
static int __cpuinit smp_alloc_lowcore(int cpu)
current_set[0] = current;
smp_cpu_state[0] = CPU_STATE_CONFIGURED;
smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
- spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
}
void __init smp_cpus_done(unsigned int max_cpus)
.vsync_len = 1,
.sync = 0, /* hsync and vsync are active low */
},
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
.board_cfg = {
.display_on = ap320_wvga_power_on,
},
.vsync_len = 2,
.sync = 0,
},
+ .lcd_size_cfg = { /* 7.0 inch */
+ .width = 152,
+ .height = 91,
+ },
}
#endif
#ifdef CONFIG_SH_MIGOR_QVGA
.vsync_len = 2,
.sync = FB_SYNC_HOR_HIGH_ACT,
},
+ .lcd_size_cfg = { /* 2.4 inch */
+ .width = 49,
+ .height = 37,
+ },
.board_cfg = {
.setup_sys = migor_lcd_qvga_setup,
},
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/mtd/physmap.h>
-#include <asm/io.h>
+#include <linux/fb.h>
+#include <linux/io.h>
#include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
/* NOR Flash */
static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
},
};
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xFEE00800, /* use eth1 */
+ .end = 0xFEE00F7C - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 58, /* irq number */
+ .end = 58,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+ .phy = 1,
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+ .name = "sh-eth",
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+ .dev = {
+ .platform_data = &sh7763_eth_pdata,
+ },
+};
+
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+ {
+ .start = 0xFFE80000,
+ .end = 0xFFE80442 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+ .refresh = 60,
+ .name = "VGA Monitor",
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 10000,
+ .left_margin = 80,
+ .right_margin = 24,
+ .upper_margin = 30,
+ .lower_margin = 1,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+ .def_mode = &sh7763fb_videomode,
+ .ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+ .lddfr = LDDFR_16BPP_RGB565,
+ .ldpmmr = 0x0000,
+ .ldpspr = 0xFFFF,
+ .ldaclnr = 0x0001,
+ .ldickr = 0x1102,
+ .rotate = 0,
+ .novsync = 0,
+ .blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+ .name = "sh7760-lcdc",
+ .resource = sh7763rdp_fb_resources,
+ .num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+ .dev = {
+ .platform_data = &sh7763fb_def_pdata,
+ },
+};
+
static struct platform_device *sh7763rdp_devices[] __initdata = {
&sh7763rdp_nor_flash_device,
+ &sh7763rdp_eth_device,
+ &sh7763rdp_fb_device,
};
static int __init sh7763rdp_devices_setup(void)
return platform_add_devices(sh7763rdp_devices,
ARRAY_SIZE(sh7763rdp_devices));
}
-__initcall(sh7763rdp_devices_setup);
+device_initcall(sh7763rdp_devices_setup);
static void __init sh7763rdp_setup(char **cmdline_p)
{
*
* Renesas SH-X3 Prototype Board Support.
*
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <linux/platform_device.h>
#include <linux/kernel.h>
#include <linux/io.h>
+#include <linux/smc91x.h>
#include <asm/ilsel.h>
static struct resource heartbeat_resources[] = {
.resource = heartbeat_resources,
};
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x18000300,
.id = -1,
.resource = smc91x_resources,
.num_resources = ARRAY_SIZE(smc91x_resources),
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
};
static struct resource r8a66597_usb_host_resources[] = {
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri Jun 6 12:20:17 2008
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug 8 13:44:20 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# Character devices
#
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_DISPLAY_SUPPORT is not set
#
-# Sound
-#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) ({ (void)p; 0; })
+#define FLAT_PLAT_INIT(_r) \
+ do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+ _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+ _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+ _r->sr = SR_FD; } while (0)
+
#endif /* __ASM_SH_FLAT_H */
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_SH
#define PORT_MSELCRB 0xa4050182
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
#define PORT_PSELA 0xa405014e
#define PORT_PSELB 0xa4050150
#define PORT_PSELC 0xa4050152
void (*display_off)(void *board_data);
};
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+ unsigned long width;
+ unsigned long height;
+};
+
struct sh_mobile_lcdc_chan_cfg {
int chan;
int bpp;
int interface_type; /* selects RGBn or SYSn I/F, see above */
int clock_divider;
struct fb_videomode lcd_cfg;
+ struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
struct sh_mobile_lcdc_board_cfg board_cfg;
struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
};
void flush_dcache_page(struct page *pg);
void flush_icache_range(unsigned long start, unsigned long end);
void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr) do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+
+#define p3_cache_init() do { } while (0)
+
#else
#include <cpu-common/cpu/cacheflush.h>
#endif
};
static struct uio_info veu0_platform_data = {
- .name = "VEU",
+ .name = "VEU2H",
.version = "0",
.irq = 54,
};
};
static struct uio_info veu1_platform_data = {
- .name = "VEU",
+ .name = "VEU2H",
.version = "0",
.irq = 27,
};
* GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
* compiler which include backported patches.
*/
-DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
DECLARE_EXPORT(__udivsi3_i4i);
#endif
+#endif
#else /* GCC 3.x */
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
choice
prompt "HugeTLB page size"
depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+ default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
default HUGETLB_PAGE_SIZE_64K
config HUGETLB_PAGE_SIZE_64K
bool "64kB"
+ depends on !PAGE_SIZE_64KB
config HUGETLB_PAGE_SIZE_256K
bool "256kB"
}
EXPORT_SYMBOL(dma_cache_sync);
+static int __init memchunk_setup(char *str)
+{
+ return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+ char *p = boot_command_line;
+ int k = strlen(name);
+
+ while ((p = strstr(p, "memchunk."))) {
+ p += 9; /* strlen("memchunk.") */
+ if (!strncmp(name, p, k) && p[k] == '=') {
+ p += k + 1;
+ *sizep = memparse(p, NULL);
+ pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+ name, *sizep);
+ break;
+ }
+ }
+}
+
int platform_resource_setup_memory(struct platform_device *pdev,
char *name, unsigned long memsize)
{
return -EINVAL;
}
+ memchunk_cmdline_override(name, &memsize);
+ if (!memsize)
+ return 0;
+
buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
if (!buf) {
pr_warning("%s: unable to allocate memory\n", name);
start += PAGE_SIZE;
}
+ if (start > end)
+ start = end;
+
return start;
}
#else
find_ramdisk(phys_base);
- if (cmdline_memory_size)
- lmb_enforce_memory_limit(phys_base + cmdline_memory_size);
+ lmb_enforce_memory_limit(cmdline_memory_size);
lmb_analyze();
lmb_dump_all();
void free_initmem(void)
{
unsigned long addr, initend;
+ int do_free = 1;
+
+ /* If the physical memory maps were trimmed by kernel command
+ * line options, don't even try freeing this initmem stuff up.
+ * The kernel image could have been in the trimmed out region
+ * and if so the freeing below will free invalid page structs.
+ */
+ if (cmdline_memory_size)
+ do_free = 0;
/*
* The init section is aligned to 8k in vmlinux.lds. Page align for >8k pagesizes.
((unsigned long) __va(kern_base)) -
((unsigned long) KERNBASE));
memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
- p = virt_to_page(page);
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- num_physpages++;
- totalram_pages++;
+ if (do_free) {
+ p = virt_to_page(page);
+
+ ClearPageReserved(p);
+ init_page_count(p);
+ __free_page(p);
+ num_physpages++;
+ totalram_pages++;
+ }
}
}
local memory controller of the CPU and add some more
NUMA awareness to the kernel.
- For i386 this is currently highly experimental and should be only
+ For 32-bit this is currently highly experimental and should be only
used for kernel development. It might also cause boot failures.
- For x86_64 this is recommended on all multiprocessor Opteron systems.
+ For 64-bit this is recommended on all multiprocessor Opteron systems.
If the system is EM64T, you should say N unless your system is
EM64T NUMA.
strongly in flux, so no good recommendation can be made.
config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
+ bool "kernel crash dumps"
depends on X86_64 || (X86_32 && HIGHMEM)
help
Generate crash dump after being started by kexec.
config X86_DEBUGCTLMSR
def_bool y
depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
+
+menuconfig PROCESSOR_SELECT
+ default y
+ bool "Supported processor vendors" if EMBEDDED
+ help
+ This lets you choose what x86 vendor support code your kernel
+ will include.
+
+config CPU_SUP_INTEL_32
+ default y
+ bool "Support Intel processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Intel processors
+
+config CPU_SUP_INTEL_64
+ default y
+ bool "Support Intel processors" if PROCESSOR_SELECT
+ depends on 64BIT
+ help
+ This enables extended support for Intel processors
+
+config CPU_SUP_CYRIX_32
+ default y
+ bool "Support Cyrix processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Cyrix processors
+
+config CPU_SUP_AMD_32
+ default y
+ bool "Support AMD processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for AMD processors
+
+config CPU_SUP_AMD_64
+ default y
+ bool "Support AMD processors" if PROCESSOR_SELECT
+ depends on 64BIT
+ help
+ This enables extended support for AMD processors
+
+config CPU_SUP_CENTAUR_32
+ default y
+ bool "Support Centaur processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Centaur processors
+
+config CPU_SUP_CENTAUR_64
+ default y
+ bool "Support Centaur processors" if PROCESSOR_SELECT
+ depends on 64BIT
+ help
+ This enables extended support for Centaur processors
+
+config CPU_SUP_TRANSMETA_32
+ default y
+ bool "Support Transmeta processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for Transmeta processors
+
+config CPU_SUP_UMC_32
+ default y
+ bool "Support UMC processors" if PROCESSOR_SELECT
+ depends on !64BIT
+ help
+ This enables extended support for UMC processors
#include <linux/edd.h>
#include <asm/boot.h>
#include <asm/setup.h>
+#include "bitops.h"
+#include <asm/cpufeature.h>
/* Useful macros */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
extern struct setup_header hdr;
extern struct boot_params boot_params;
int cmdline_find_option_bool(const char *option);
/* cpu.c, cpucheck.c */
+struct cpu_features {
+ int level; /* Family, or 64 for x86-64 */
+ int model;
+ u32 flags[NCAPINTS];
+};
+extern struct cpu_features cpu;
int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
int validate_cpu(void);
*/
#include "boot.h"
-#include "bitops.h"
-#include <asm/cpufeature.h>
-
#include "cpustr.h"
static char *cpu_name(int level)
#ifdef _SETUP
# include "boot.h"
-# include "bitops.h"
#endif
#include <linux/types.h>
-#include <asm/cpufeature.h>
#include <asm/processor-flags.h>
#include <asm/required-features.h>
#include <asm/msr-index.h>
-struct cpu_features {
- int level; /* Family, or 64 for x86-64 */
- int model;
- u32 flags[NCAPINTS];
-};
-
-static struct cpu_features cpu;
+struct cpu_features cpu;
static u32 cpu_vendor[3];
static u32 err_flags[NCAPINTS];
{
REQUIRED_MASK0,
REQUIRED_MASK1,
- REQUIRED_MASK2,
- REQUIRED_MASK3,
+ 0, /* REQUIRED_MASK2 not implemented in this file */
+ 0, /* REQUIRED_MASK3 not implemented in this file */
REQUIRED_MASK4,
- REQUIRED_MASK5,
+ 0, /* REQUIRED_MASK5 not implemented in this file */
REQUIRED_MASK6,
- REQUIRED_MASK7,
+ 0, /* REQUIRED_MASK7 not implemented in this file */
};
#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
*/
static void query_ist(void)
{
+ /* Some older BIOSes apparently crash on this call, so filter
+ it from machines too old to have SpeedStep at all. */
+ if (cpu.level < 6)
+ return;
+
asm("int $0x15"
: "=a" (boot_params.ist_info.signature),
"=b" (boot_params.ist_info.command),
*/
#include "boot.h"
-#include <linux/kernel.h>
#define SMAP 0x534d4150 /* ASCII "SMAP" */
#include <stdio.h>
-#include "../kernel/cpu/feature_names.c"
+#include "../kernel/cpu/capflags.c"
#if NCAPFLAGS > 8
# error "Need to adjust the boot code handling of CPUID strings"
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
CONFIG_EFI=y
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
# CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Ciphers
#
CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May 4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=y
#
# Rate control algorithm selection
#
+CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_MD_LINEAR is not set
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
#
# Display device support
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
# CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
#
# LED Triggers
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
#
# SPI RTC drivers
# Firmware Drivers
#
# CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
#
# File systems
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
# CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#warning ACPI uses CMPXCHG, i486 and later hardware
#endif
+static int acpi_mcfg_64bit_base_addr __initdata = FALSE;
+
/* --------------------------------------------------------------------------
Boot-time Configuration
-------------------------------------------------------------------------- */
struct acpi_mcfg_allocation *pci_mmcfg_config;
int pci_mmcfg_config_num;
+static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg)
+{
+ if (!strcmp(mcfg->header.oem_id, "SGI"))
+ acpi_mcfg_64bit_base_addr = TRUE;
+
+ return 0;
+}
+
int __init acpi_parse_mcfg(struct acpi_table_header *header)
{
struct acpi_table_mcfg *mcfg;
}
memcpy(pci_mmcfg_config, &mcfg[1], config_size);
+
+ acpi_mcfg_oem_check(mcfg);
+
for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
+ if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) &&
+ !acpi_mcfg_64bit_base_addr) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
kfree(pci_mmcfg_config);
/* address in low memory of the wakeup routine. */
static unsigned long acpi_realmode;
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_SMP) && defined(CONFIG_64BIT)
static char temp_stack[10240];
#endif
#endif /* !CONFIG_64BIT */
header->pmode_cr0 = read_cr0();
- header->pmode_cr4 = read_cr4();
+ header->pmode_cr4 = read_cr4_safe();
header->realmode_flags = acpi_realmode_flags;
header->real_magic = 0x12345678;
extern char __vsyscall_0;
const unsigned char *const *find_nop_table(void)
{
- return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
- boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return k8_nops;
}
#else /* CONFIG_X86_64 */
-static const struct nop {
- int cpuid;
- const unsigned char *const *noptable;
-} noptypes[] = {
- { X86_FEATURE_K8, k8_nops },
- { X86_FEATURE_K7, k7_nops },
- { X86_FEATURE_P4, p6_nops },
- { X86_FEATURE_P3, p6_nops },
- { -1, NULL }
-};
-
const unsigned char *const *find_nop_table(void)
{
- const unsigned char *const *noptable = intel_nops;
- int i;
-
- for (i = 0; noptypes[i].cpuid >= 0; i++) {
- if (boot_cpu_has(noptypes[i].cpuid)) {
- noptable = noptypes[i].noptable;
- break;
- }
- }
- return noptable;
+ if (boot_cpu_has(X86_FEATURE_K8))
+ return k8_nops;
+ else if (boot_cpu_has(X86_FEATURE_K7))
+ return k7_nops;
+ else if (boot_cpu_has(X86_FEATURE_NOPL))
+ return p6_nops;
+ else
+ return intel_nops;
}
#endif /* CONFIG_X86_64 */
u8 *target;
tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
- target = (iommu->cmd_buf + tail);
+ target = iommu->cmd_buf + tail;
memcpy_toio(target, cmd, sizeof(*cmd));
tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
*/
static int iommu_completion_wait(struct amd_iommu *iommu)
{
- int ret;
+ int ret, ready = 0;
+ unsigned status = 0;
struct iommu_cmd cmd;
- volatile u64 ready = 0;
- unsigned long ready_phys = virt_to_phys(&ready);
unsigned long i = 0;
memset(&cmd, 0, sizeof(cmd));
- cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
- cmd.data[1] = upper_32_bits(ready_phys);
- cmd.data[2] = 1; /* value written to 'ready' */
+ cmd.data[0] = CMD_COMPL_WAIT_INT_MASK;
CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
iommu->need_sync = 0;
while (!ready && (i < EXIT_LOOP_COUNT)) {
++i;
- cpu_relax();
+ /* wait for the bit to become one */
+ status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
+ ready = status & MMIO_STATUS_COM_WAIT_INT_MASK;
}
+ /* set bit back to zero */
+ status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
+ writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
+
if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
address &= PAGE_MASK;
CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
cmd.data[1] |= domid;
- cmd.data[2] = LOW_U32(address);
+ cmd.data[2] = lower_32_bits(address);
cmd.data[3] = upper_32_bits(address);
if (s) /* size bit - we flush more than one 4kb page */
cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
return 0;
}
+/*
+ * Init the device table to not allow DMA access for devices and
+ * suppress all page faults
+ */
+static void init_device_table(void)
+{
+ u16 devid;
+
+ for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) {
+ set_dev_entry_bit(devid, DEV_ENTRY_VALID);
+ set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION);
+ set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT);
+ }
+}
+
/*
* This function finally enables all IOMMUs found in the system after
* they have been initialized
if (amd_iommu_pd_alloc_bitmap == NULL)
goto free;
+ /* init the device table */
+ init_device_table();
+
/*
* let all alias entries point to itself
*/
if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
goto free;
- ret = amd_iommu_init_dma_ops();
+ ret = sysdev_class_register(&amd_iommu_sysdev_class);
if (ret)
goto free;
- ret = sysdev_class_register(&amd_iommu_sysdev_class);
+ ret = sysdev_register(&device_amd_iommu);
if (ret)
goto free;
- ret = sysdev_register(&device_amd_iommu);
+ ret = amd_iommu_init_dma_ops();
if (ret)
goto free;
}
}
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
void __cpuinit generic_processor_info(int apicid, int version)
{
int cpu;
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
num_processors++;
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
unsigned long mp_lapic_addr;
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
/*
* Get the LAPIC version
*/
return;
}
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
num_processors++;
cpus_complement(tmp_map, cpu_present_map);
cpu = first_cpu(tmp_map);
#
obj-y := intel_cacheinfo.o addon_cpuid_features.o
-obj-y += proc.o feature_names.o
+obj-y += proc.o capflags.o powerflags.o
-obj-$(CONFIG_X86_32) += common.o bugs.o
+obj-$(CONFIG_X86_32) += common.o bugs.o cmpxchg.o
obj-$(CONFIG_X86_64) += common_64.o bugs_64.o
-obj-$(CONFIG_X86_32) += amd.o
-obj-$(CONFIG_X86_64) += amd_64.o
-obj-$(CONFIG_X86_32) += cyrix.o
-obj-$(CONFIG_X86_32) += centaur.o
-obj-$(CONFIG_X86_64) += centaur_64.o
-obj-$(CONFIG_X86_32) += transmeta.o
-obj-$(CONFIG_X86_32) += intel.o
-obj-$(CONFIG_X86_64) += intel_64.o
-obj-$(CONFIG_X86_32) += umc.o
+
+obj-$(CONFIG_CPU_SUP_AMD_32) += amd.o
+obj-$(CONFIG_CPU_SUP_AMD_64) += amd_64.o
+obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o
+obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o
+obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
+obj-$(CONFIG_CPU_SUP_INTEL_32) += intel.o
+obj-$(CONFIG_CPU_SUP_INTEL_64) += intel_64.o
+obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
obj-$(CONFIG_X86_MCE) += mcheck/
obj-$(CONFIG_MTRR) += mtrr/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_X86_LOCAL_APIC) += perfctr-watchdog.o
+
+quiet_cmd_mkcapflags = MKCAP $@
+ cmd_mkcapflags = $(PERL) $(srctree)/$(src)/mkcapflags.pl $< $@
+
+cpufeature = $(src)/../../../../include/asm-x86/cpufeature.h
+
+targets += capflags.c
+$(obj)/capflags.c: $(cpufeature) $(src)/mkcapflags.pl FORCE
+ $(call if_changed,mkcapflags)
switch (c->x86_vendor) {
case X86_VENDOR_INTEL:
- if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+ /*
+ * There is a known erratum on Pentium III and Core Solo
+ * and Core Duo CPUs.
+ * " Page with PAT set to WC while associated MTRR is UC
+ * may consolidate to UC "
+ * Because of this erratum, it is better to stick with
+ * setting WC in MTRR rather than using PAT on these CPUs.
+ *
+ * Enable PAT WC only on P4, Core 2 or later CPUs.
+ */
+ if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
return;
- break;
+
+ pat_disable("PAT WC disabled due to known CPU erratum.");
+ return;
+
case X86_VENDOR_AMD:
case X86_VENDOR_CENTAUR:
case X86_VENDOR_TRANSMETA:
--- /dev/null
+/*
+ * cmpxchg*() fallbacks for CPU not supporting these instructions
+ */
+
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+
+#ifndef CONFIG_X86_CMPXCHG
+unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
+{
+ u8 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u8 *)ptr;
+ if (prev == old)
+ *(u8 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u8);
+
+unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
+{
+ u16 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u16 *)ptr;
+ if (prev == old)
+ *(u16 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u16);
+
+unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
+{
+ u32 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg for 386. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u32 *)ptr;
+ if (prev == old)
+ *(u32 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_386_u32);
+#endif
+
+#ifndef CONFIG_X86_CMPXCHG64
+unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
+{
+ u64 prev;
+ unsigned long flags;
+
+ /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
+ local_irq_save(flags);
+ prev = *(u64 *)ptr;
+ if (prev == old)
+ *(u64 *)ptr = new;
+ local_irq_restore(flags);
+ return prev;
+}
+EXPORT_SYMBOL(cmpxchg_486_u64);
+#endif
+
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
early_get_cap(c);
}
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
+}
+
static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
{
u32 tfms, xlvl;
}
init_scattered_cpuid_features(c);
+ detect_nopl(c);
}
-
}
static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
#include <asm/mtrr.h>
#include <asm/mce.h>
#include <asm/pat.h>
+#include <asm/asm.h>
#include <asm/numa.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
}
}
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect. Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+ const u32 nopl_signature = 0x888c53b1; /* Random number */
+ u32 has_nopl = nopl_signature;
+
+ clear_cpu_cap(c, X86_FEATURE_NOPL);
+ if (c->x86 >= 6) {
+ asm volatile("\n"
+ "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+ "2:\n"
+ " .section .fixup,\"ax\"\n"
+ "3: xor %0,%0\n"
+ " jmp 2b\n"
+ " .previous\n"
+ _ASM_EXTABLE(1b,3b)
+ : "+a" (has_nopl));
+
+ if (has_nopl == nopl_signature)
+ set_cpu_cap(c, X86_FEATURE_NOPL);
+ }
+}
+
static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
void __init early_cpu_init(void)
c->x86_phys_bits = eax & 0xff;
}
+ detect_nopl(c);
+
if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
cpu_devs[c->x86_vendor]->c_early_init)
cpu_devs[c->x86_vendor]->c_early_init(c);
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
{
- if (!data->acpi_data->state_count || (cpu_family == CPU_HW_PSTATE))
+ if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
return;
- data->irt = (data->acpi_data->states[index].control >> IRT_SHIFT) & IRT_MASK;
- data->rvo = (data->acpi_data->states[index].control >> RVO_SHIFT) & RVO_MASK;
- data->exttype = (data->acpi_data->states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
- data->plllock = (data->acpi_data->states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
- data->vidmvs = 1 << ((data->acpi_data->states[index].control >> MVS_SHIFT) & MVS_MASK);
- data->vstable = (data->acpi_data->states[index].control >> VST_SHIFT) & VST_MASK;
-}
-
-
-static struct acpi_processor_performance *acpi_perf_data;
-static int preregister_valid;
-
-static int powernow_k8_cpu_preinit_acpi(void)
-{
- acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
- if (!acpi_perf_data)
- return -ENODEV;
-
- if (acpi_processor_preregister_performance(acpi_perf_data))
- return -ENODEV;
- else
- preregister_valid = 1;
- return 0;
+ data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+ data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+ data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+ data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+ data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+ data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
}
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
{
struct cpufreq_frequency_table *powernow_table;
int ret_val;
- int cpu = 0;
- data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
- if (acpi_processor_register_performance(data->acpi_data, data->cpu)) {
+ if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
return -EIO;
}
/* verify the data contained in the ACPI structures */
- if (data->acpi_data->state_count <= 1) {
+ if (data->acpi_data.state_count <= 1) {
dprintk("No ACPI P-States\n");
goto err_out;
}
- if ((data->acpi_data->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (data->acpi_data->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data->control_register.space_id,
- data->acpi_data->status_register.space_id);
+ data->acpi_data.control_register.space_id,
+ data->acpi_data.status_register.space_id);
goto err_out;
}
/* fill in data->powernow_table */
powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
- * (data->acpi_data->state_count + 1)), GFP_KERNEL);
+ * (data->acpi_data.state_count + 1)), GFP_KERNEL);
if (!powernow_table) {
dprintk("powernow_table memory alloc failure\n");
goto err_out;
if (ret_val)
goto err_out_mem;
- powernow_table[data->acpi_data->state_count].frequency = CPUFREQ_TABLE_END;
- powernow_table[data->acpi_data->state_count].index = 0;
+ powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+ powernow_table[data->acpi_data.state_count].index = 0;
data->powernow_table = powernow_table;
/* fill in data */
- data->numps = data->acpi_data->state_count;
+ data->numps = data->acpi_data.state_count;
if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
print_basics(data);
powernow_k8_acpi_pst_values(data, 0);
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- /* determine affinity, from ACPI if available */
- if (preregister_valid) {
- if ((data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ALL) ||
- (data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ANY))
- data->starting_core_affinity = data->acpi_data->shared_cpu_map;
- else
- data->starting_core_affinity = cpumask_of_cpu(data->cpu);
- } else {
- /* best guess from family if not */
- if (cpu_family == CPU_HW_PSTATE)
- data->starting_core_affinity = cpumask_of_cpu(data->cpu);
- else
- data->starting_core_affinity = per_cpu(cpu_core_map, data->cpu);
- }
-
return 0;
err_out_mem:
kfree(powernow_table);
err_out:
- acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
- data->acpi_data->state_count = 0;
+ data->acpi_data.state_count = 0;
return -ENODEV;
}
rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
- for (i = 0; i < data->acpi_data->state_count; i++) {
+ for (i = 0; i < data->acpi_data.state_count; i++) {
u32 index;
- index = data->acpi_data->states[i].control & HW_PSTATE_MASK;
+ index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
if (index > data->max_hw_pstate) {
printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
powernow_table[i].index = index;
- powernow_table[i].frequency = data->acpi_data->states[i].core_frequency * 1000;
+ powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
}
return 0;
}
{
int i;
int cntlofreq = 0;
- for (i = 0; i < data->acpi_data->state_count; i++) {
+ for (i = 0; i < data->acpi_data.state_count; i++) {
u32 fid;
u32 vid;
if (data->exttype) {
- fid = data->acpi_data->states[i].status & EXT_FID_MASK;
- vid = (data->acpi_data->states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+ fid = data->acpi_data.states[i].status & EXT_FID_MASK;
+ vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
} else {
- fid = data->acpi_data->states[i].control & FID_MASK;
- vid = (data->acpi_data->states[i].control >> VID_SHIFT) & VID_MASK;
+ fid = data->acpi_data.states[i].control & FID_MASK;
+ vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
}
dprintk(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
cntlofreq = i;
}
- if (powernow_table[i].frequency != (data->acpi_data->states[i].core_frequency * 1000)) {
+ if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
powernow_table[i].frequency,
- (unsigned int) (data->acpi_data->states[i].core_frequency * 1000));
+ (unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
continue;
}
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
{
- if (data->acpi_data->state_count)
- acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+ if (data->acpi_data.state_count)
+ acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
}
#else
-static int powernow_k8_cpu_preinit_acpi(void) { return -ENODEV; }
static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
- cpumask_t oldmask = CPU_MASK_ALL;
+ cpumask_t oldmask;
int rc;
if (!cpu_online(pol->cpu))
/* run on any CPU again */
set_cpus_allowed_ptr(current, &oldmask);
- pol->cpus = data->starting_core_affinity;
+ if (cpu_family == CPU_HW_PSTATE)
+ pol->cpus = cpumask_of_cpu(pol->cpu);
+ else
+ pol->cpus = per_cpu(cpu_core_map, pol->cpu);
data->available_cores = &(pol->cpus);
/* Take a crude guess here.
}
if (supported_cpus == num_online_cpus()) {
- powernow_k8_cpu_preinit_acpi();
printk(KERN_INFO PFX "Found %d %s "
"processors (%d cpu cores) (" VERSION ")\n",
num_online_nodes(),
dprintk("exit\n");
cpufreq_unregister_driver(&cpufreq_amd64_driver);
-
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
- free_percpu(acpi_perf_data);
-#endif
}
MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
/* the acpi table needs to be kept. it's only available if ACPI was
* used to determine valid frequency/vid/fid states */
- struct acpi_processor_performance *acpi_data;
+ struct acpi_processor_performance acpi_data;
#endif
/* we need to keep track of associated cores, but let cpufreq
* handle hotplug events - so just point at cpufreq pol->cpus
* structure */
cpumask_t *available_cores;
- cpumask_t starting_core_affinity;
};
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* Load/Store Serialize to mem access disable (=reorder it) */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) & ~0x80);
+ setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
/* set load/store serialize from 1GB to 4GB */
ccr3 |= 0xe0;
setCx86(CX86_CCR3, ccr3);
printk(KERN_INFO "Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
/* CCR2 bit 2: unlock NW bit */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) & ~0x04);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
/* set 'Not Write-through' */
write_cr0(read_cr0() | X86_CR0_NW);
/* CCR2 bit 2: lock NW bit and set WT1 */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
-}
-
-static void __cpuinit set_cx86_inc(void)
-{
- unsigned char ccr3;
-
- printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
- ccr3 = getCx86(CX86_CCR3);
- setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- /* PCR1 -- Performance Control */
- /* Incrementor on, whatever that is */
- setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
- /* PCR0 -- Performance Control */
- /* Incrementor Margin 10 */
- setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
- setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
}
/*
local_irq_save(flags);
/* Suspend on halt power saving and enable #SUSP pin */
- setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
+ setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
/* FPU fast, DTE cache, Mem bypass */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
set_cx86_memwb();
set_cx86_reorder();
- set_cx86_inc();
local_irq_restore(flags);
}
/* GXm supports extended cpuid levels 'ala' AMD */
if (c->cpuid_level == 2) {
/* Enable cxMMX extensions (GX1 Datasheet 54) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
/*
* GXm : 0x30 ... 0x5f GXm datasheet 51
if (dir1 > 7) {
dir0_msn++; /* M II */
/* Enable MMX extensions (App note 108) */
- setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
+ setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
} else {
c->coma_bug = 1; /* 6x86MX, it has the bug. */
}
local_irq_save(flags);
ccr3 = getCx86(CX86_CCR3);
setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
- setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x80); /* enable cpuid */
+ setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); /* enable cpuid */
setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
local_irq_restore(flags);
}
+++ /dev/null
-/*
- * Strings for the various x86 capability flags.
- *
- * This file must not contain any executable code.
- */
-
-#include <asm/cpufeature.h>
-
-/*
- * These flag bits must match the definitions in <asm/cpufeature.h>.
- * NULL means this bit is undefined or reserved; either way it doesn't
- * have meaning as far as Linux is concerned. Note that it's important
- * to realize there is a difference between this table and CPUID -- if
- * applications want to get the raw CPUID data, they should access
- * /dev/cpu/<cpu_nr>/cpuid instead.
- */
-const char * const x86_cap_flags[NCAPINTS*32] = {
- /* Intel-defined */
- "fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
- "cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
- "pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
-
- /* AMD-defined */
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
- "3dnowext", "3dnow",
-
- /* Transmeta-defined */
- "recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Other (Linux-defined) */
- "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
- NULL, NULL, NULL, NULL,
- "constant_tsc", "up", NULL, "arch_perfmon",
- "pebs", "bts", NULL, NULL,
- "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Intel-defined (#2) */
- "pni", NULL, NULL, "monitor", "ds_cpl", "vmx", "smx", "est",
- "tm2", "ssse3", "cid", NULL, NULL, "cx16", "xtpr", NULL,
- NULL, NULL, "dca", "sse4_1", "sse4_2", "x2apic", NULL, "popcnt",
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* VIA/Cyrix/Centaur-defined */
- NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
- "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic",
- "cr8_legacy", "abm", "sse4a", "misalignsse",
- "3dnowprefetch", "osvw", "ibs", "sse5",
- "skinit", "wdt", NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-
- /* Auxiliary (Linux-defined) */
- "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
-};
-
-const char *const x86_power_flags[32] = {
- "ts", /* temperature sensor */
- "fid", /* frequency id control */
- "vid", /* voltage id control */
- "ttp", /* thermal trip */
- "tm",
- "stc",
- "100mhzsteps",
- "hwpstate",
- "", /* tsc invariant mapped to constant_tsc */
- /* nothing */
-};
#include <mach_apic.h>
#endif
-#ifdef CONFIG_X86_INTEL_USERCOPY
-/*
- * Alignment at which movsl is preferred for bulk memory copies.
- */
-struct movsl_mask movsl_mask __read_mostly;
-#endif
-
static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
-#ifndef CONFIG_X86_CMPXCHG
-unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
-{
- u8 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u8 *)ptr;
- if (prev == old)
- *(u8 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u8);
-
-unsigned long cmpxchg_386_u16(volatile void *ptr, u16 old, u16 new)
-{
- u16 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u16 *)ptr;
- if (prev == old)
- *(u16 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u16);
-
-unsigned long cmpxchg_386_u32(volatile void *ptr, u32 old, u32 new)
-{
- u32 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg for 386. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u32 *)ptr;
- if (prev == old)
- *(u32 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_386_u32);
-#endif
-
-#ifndef CONFIG_X86_CMPXCHG64
-unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
-{
- u64 prev;
- unsigned long flags;
-
- /* Poor man's cmpxchg8b for 386 and 486. Unsuitable for SMP */
- local_irq_save(flags);
- prev = *(u64 *)ptr;
- if (prev == old)
- *(u64 *)ptr = new;
- local_irq_restore(flags);
- return prev;
-}
-EXPORT_SYMBOL(cmpxchg_486_u64);
-#endif
-
/* arch_initcall(intel_cpu_init); */
/*
- * Routines to indentify caches on Intel CPU.
+ * Routines to indentify caches on Intel CPU.
*
- * Changes:
- * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
+ * Changes:
+ * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
* Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
* Andi Kleen / Andreas Herrmann : CPUID4 emulation on AMD.
*/
#include <linux/compiler.h>
#include <linux/cpu.h>
#include <linux/sched.h>
+#include <linux/pci.h>
#include <asm/processor.h>
#include <asm/smp.h>
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned long size;
+ unsigned long can_disable;
cpumask_t shared_cpu_map; /* future?: only cpus/node is needed */
};
+#ifdef CONFIG_PCI
+static struct pci_device_id k8_nb_id[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
+ {}
+};
+#endif
+
unsigned short num_cache_leaves;
/* AMD doesn't have CPUID4. Emulate it here to report the same
static unsigned char levels[] __cpuinitdata = { 1, 1, 2, 3 };
static unsigned char types[] __cpuinitdata = { 1, 2, 3, 3 };
-static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
- union _cpuid4_leaf_ebx *ebx,
- union _cpuid4_leaf_ecx *ecx)
+static void __cpuinit
+amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
+ union _cpuid4_leaf_ebx *ebx,
+ union _cpuid4_leaf_ecx *ecx)
{
unsigned dummy;
unsigned line_size, lines_per_tag, assoc, size_in_kb;
(ebx->split.ways_of_associativity + 1) - 1;
}
-static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
+static void __cpuinit
+amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf)
+{
+ if (index < 3)
+ return;
+ this_leaf->can_disable = 1;
+}
+
+static int
+__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf)
{
union _cpuid4_leaf_eax eax;
union _cpuid4_leaf_ebx ebx;
union _cpuid4_leaf_ecx ecx;
unsigned edx;
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
amd_cpuid4(index, &eax, &ebx, &ecx);
- else
- cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+ if (boot_cpu_data.x86 >= 0x10)
+ amd_check_l3_disable(index, this_leaf);
+ } else {
+ cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+ }
+
if (eax.split.type == CACHE_TYPE_NULL)
return -EIO; /* better error ? */
this_leaf->eax = eax;
this_leaf->ebx = ebx;
this_leaf->ecx = ecx;
- this_leaf->size = (ecx.split.number_of_sets + 1) *
- (ebx.split.coherency_line_size + 1) *
- (ebx.split.physical_line_partition + 1) *
- (ebx.split.ways_of_associativity + 1);
+ this_leaf->size = (ecx.split.number_of_sets + 1) *
+ (ebx.split.coherency_line_size + 1) *
+ (ebx.split.physical_line_partition + 1) *
+ (ebx.split.ways_of_associativity + 1);
return 0;
}
/* pointer to _cpuid4_info array (for each cache leaf) */
static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info);
-#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y]))
+#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y]))
#ifdef CONFIG_SMP
static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
this_leaf = CPUID4_INFO_IDX(cpu, index);
for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
- sibling_leaf = CPUID4_INFO_IDX(sibling, index);
+ sibling_leaf = CPUID4_INFO_IDX(sibling, index);
cpu_clear(cpu, sibling_leaf->shared_cpu_map);
}
}
/* pointer to array of kobjects for cpuX/cache/indexY */
static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
-#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y]))
+#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y]))
#define show_one_plus(file_name, object, val) \
static ssize_t show_##file_name \
}
}
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+#ifdef CONFIG_PCI
+static struct pci_dev *get_k8_northbridge(int node)
+{
+ struct pci_dev *dev = NULL;
+ int i;
+
+ for (i = 0; i <= node; i++) {
+ do {
+ dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
+ if (!dev)
+ break;
+ } while (!pci_match_id(&k8_nb_id[0], dev));
+ if (!dev)
+ break;
+ }
+ return dev;
+}
+#else
+static struct pci_dev *get_k8_northbridge(int node)
+{
+ return NULL;
+}
+#endif
+
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+{
+ int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+ struct pci_dev *dev = NULL;
+ ssize_t ret = 0;
+ int i;
+
+ if (!this_leaf->can_disable)
+ return sprintf(buf, "Feature not enabled\n");
+
+ dev = get_k8_northbridge(node);
+ if (!dev) {
+ printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < 2; i++) {
+ unsigned int reg;
+
+ pci_read_config_dword(dev, 0x1BC + i * 4, ®);
+
+ ret += sprintf(buf, "%sEntry: %d\n", buf, i);
+ ret += sprintf(buf, "%sReads: %s\tNew Entries: %s\n",
+ buf,
+ reg & 0x80000000 ? "Disabled" : "Allowed",
+ reg & 0x40000000 ? "Disabled" : "Allowed");
+ ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
+ buf, (reg & 0x30000) >> 16, reg & 0xfff);
+ }
+ return ret;
+}
+
+static ssize_t
+store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
+ size_t count)
+{
+ int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map));
+ struct pci_dev *dev = NULL;
+ unsigned int ret, index, val;
+
+ if (!this_leaf->can_disable)
+ return 0;
+
+ if (strlen(buf) > 15)
+ return -EINVAL;
+
+ ret = sscanf(buf, "%x %x", &index, &val);
+ if (ret != 2)
+ return -EINVAL;
+ if (index > 1)
+ return -EINVAL;
+
+ val |= 0xc0000000;
+ dev = get_k8_northbridge(node);
+ if (!dev) {
+ printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
+ return -EINVAL;
+ }
+
+ pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
+ wbinvd();
+ pci_write_config_dword(dev, 0x1BC + index * 4, val);
+
+ return 1;
+}
+
struct _cache_attr {
struct attribute attr;
ssize_t (*show)(struct _cpuid4_info *, char *);
define_one_ro(shared_cpu_map);
define_one_ro(shared_cpu_list);
+static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+
static struct attribute * default_attrs[] = {
&type.attr,
&level.attr,
&size.attr,
&shared_cpu_map.attr,
&shared_cpu_list.attr,
+ &cache_disable.attr,
NULL
};
-#define to_object(k) container_of(k, struct _index_kobject, kobj)
-#define to_attr(a) container_of(a, struct _cache_attr, attr)
-
static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
{
struct _cache_attr *fattr = to_attr(attr);
ret = fattr->show ?
fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
buf) :
- 0;
+ 0;
return ret;
}
static ssize_t store(struct kobject * kobj, struct attribute * attr,
const char * buf, size_t count)
{
- return 0;
+ struct _cache_attr *fattr = to_attr(attr);
+ struct _index_kobject *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->store ?
+ fattr->store(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+ buf, count) :
+ 0;
+ return ret;
}
static struct sysfs_ops sysfs_ops = {
};
DEFINE_PER_CPU(struct sys_device, device_mce);
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
/* Why are there no generic functions for this? */
#define ACCESSOR(name, var, start) \
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
mce_create_device(cpu);
+ if (threshold_cpu_callback)
+ threshold_cpu_callback(action, cpu);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
+ if (threshold_cpu_callback)
+ threshold_cpu_callback(action, cpu);
mce_remove_device(cpu);
break;
}
deallocate_threshold_block(cpu, bank);
free_out:
+ kobject_del(b->kobj);
kobject_put(b->kobj);
kfree(b);
per_cpu(threshold_banks, cpu)[bank] = NULL;
}
/* get notified when a cpu comes on/off */
-static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
- unsigned long action, void *hcpu)
+static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
+ unsigned int cpu)
{
- /* cpu was unsigned int to begin with */
- unsigned int cpu = (unsigned long)hcpu;
-
if (cpu >= NR_CPUS)
- goto out;
+ return;
switch (action) {
case CPU_ONLINE:
default:
break;
}
- out:
- return NOTIFY_OK;
}
-static struct notifier_block threshold_cpu_notifier __cpuinitdata = {
- .notifier_call = threshold_cpu_callback,
-};
-
static __init int threshold_init_device(void)
{
unsigned lcpu = 0;
if (err)
return err;
}
- register_hotcpu_notifier(&threshold_cpu_notifier);
+ threshold_cpu_callback = amd_64_threshold_cpu_callback;
return 0;
}
--- /dev/null
+#!/usr/bin/perl
+#
+# Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
+#
+
+($in, $out) = @ARGV;
+
+open(IN, "< $in\0") or die "$0: cannot open: $in: $!\n";
+open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
+
+print OUT "#include <asm/cpufeature.h>\n\n";
+print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
+
+while (defined($line = <IN>)) {
+ if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
+ $macro = $1;
+ $feature = $2;
+ $tail = $3;
+ if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
+ $feature = $1;
+ }
+
+ if ($feature ne '') {
+ printf OUT "\t%-32s = \"%s\",\n",
+ "[$macro]", "\L$feature";
+ }
+ }
+}
+print OUT "};\n";
+
+close(IN);
+close(OUT);
unsigned long *size, mtrr_type *type)
{
unsigned int mask_lo, mask_hi, base_lo, base_hi;
+ unsigned int tmp, hi;
rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
if ((mask_lo & 0x800) == 0) {
rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
/* Work out the shifted address mask. */
- mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
- | mask_lo >> PAGE_SHIFT;
+ tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+ mask_lo = size_or_mask | tmp;
+ /* Expand tmp with high bits to all 1s*/
+ hi = fls(tmp);
+ if (hi > 0) {
+ tmp |= ~((1<<(hi - 1)) - 1);
+
+ if (tmp != mask_lo) {
+ static int once = 1;
+
+ if (once) {
+ printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+ once = 0;
+ }
+ mask_lo = tmp;
+ }
+ }
/* This works correctly if size is a power of two, i.e. a
contiguous range. */
/* kvm/qemu doesn't have mtrr set right, don't trim them all */
if (!highest_pfn) {
- if (!kvm_para_available()) {
- printk(KERN_WARNING
+ WARN(!kvm_para_available(), KERN_WARNING
"WARNING: strange, CPU MTRRs all blank?\n");
- WARN_ON(1);
- }
return 0;
}
perfctr_msr = MSR_P4_IQ_PERFCTR1;
evntsel_msr = MSR_P4_CRU_ESCR0;
cccr_msr = MSR_P4_IQ_CCCR1;
- cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4);
+
+ /* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
+ if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
+ cccr_val = P4_CCCR_OVF_PMI0;
+ else
+ cccr_val = P4_CCCR_OVF_PMI1;
+ cccr_val |= P4_CCCR_ESCR_SELECT(4);
}
evntsel = P4_ESCR_EVENT_SELECT(0x3F)
--- /dev/null
+/*
+ * Strings for the various x86 power flags
+ *
+ * This file must not contain any executable code.
+ */
+
+#include <asm/cpufeature.h>
+
+const char *const x86_power_flags[32] = {
+ "ts", /* temperature sensor */
+ "fid", /* frequency id control */
+ "vid", /* voltage id control */
+ "ttp", /* thermal trip */
+ "tm",
+ "stc",
+ "100mhzsteps",
+ "hwpstate",
+ "", /* tsc invariant mapped to constant_tsc */
+ /* nothing */
+};
struct cpuid_regs cmd;
int cpu = iminor(file->f_path.dentry->d_inode);
u64 pos = *ppos;
+ ssize_t bytes = 0;
+ int err = 0;
if (count % 16)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 16) {
cmd.eax = pos;
cmd.ecx = pos >> 32;
- smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
- if (copy_to_user(tmp, &cmd, 16))
- return -EFAULT;
+ err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+ if (err)
+ break;
+ if (copy_to_user(tmp, &cmd, 16)) {
+ err = -EFAULT;
+ break;
+ }
tmp += 16;
+ bytes += 16;
*ppos = ++pos;
}
- return tmp - buf;
+ return bytes ? bytes : err;
}
static int cpuid_open(struct inode *inode, struct file *file)
* directory. If I have PAE, I just need to duplicate one entry in
* page directory.
*/
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
efi_bak_pg_dir_pointer[0].pgd =
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
- cr4 = read_cr4();
+ cr4 = read_cr4_safe();
if (cr4 & X86_CR4_PAE) {
swapper_pg_dir[pgd_index(0)].pgd =
enum map_type {map_wb, map_uc};
-static void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
+static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type)
{
unsigned long bytes, paddr;
sn_rtc_cycles_per_second = ticks_per_sec;
}
-static __init void uv_system_init(void)
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
{
union uvh_si_addr_map_config_u m_n_config;
union uvh_node_id_u node_id;
map_mmr_high(max_pnode);
map_config_high(max_pnode);
map_mmioh_high(max_pnode);
+ uv_system_inited = true;
}
/*
*/
void __cpuinit uv_cpu_init(void)
{
- if (!uv_node_to_blade)
- uv_system_init();
+ BUG_ON(!uv_system_inited);
uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
(__START_KERNEL & PGDIR_MASK)));
+ BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END);
/* clear bss before set_intr_gate with early_idt_handler */
clear_bss();
int __init hpet_enable(void)
{
unsigned long id;
+ int i;
if (!is_hpet_capable())
return 0;
* Read the period and check for a sane value:
*/
hpet_period = hpet_readl(HPET_PERIOD);
+
+ /*
+ * AMD SB700 based systems with spread spectrum enabled use a
+ * SMM based HPET emulation to provide proper frequency
+ * setting. The SMM code is initialized with the first HPET
+ * register access and takes some time to complete. During
+ * this time the config register reads 0xffffffff. We check
+ * for max. 1000 loops whether the config register reads a non
+ * 0xffffffff value to make sure that HPET is up and running
+ * before we go further. A counting loop is safe, as the HPET
+ * access takes thousands of CPU cycles. On non SB700 based
+ * machines this check is only done once and has no side
+ * effects.
+ */
+ for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
+ if (i == 1000) {
+ printk(KERN_WARNING
+ "HPET config register value = 0xFFFFFFFF. "
+ "Disabling HPET\n");
+ goto out_nohpet;
+ }
+ }
+
if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
goto out_nohpet;
#include <linux/init.h>
#include <linux/numa.h>
#include <linux/ftrace.h>
+#include <linux/suspend.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
/*
* A architecture hook called to validate the
* proposed image and prepare the control pages
- * as needed. The pages for KEXEC_CONTROL_CODE_SIZE
+ * as needed. The pages for KEXEC_CONTROL_PAGE_SIZE
* have been allocated, but the segments have yet
* been copied into the kernel.
*
{
unsigned long page_list[PAGES_NR];
void *control_page;
+ int save_ftrace_enabled;
asmlinkage unsigned long
(*relocate_kernel_ptr)(unsigned long indirection_page,
unsigned long control_page,
unsigned int has_pae,
unsigned int preserve_context);
- tracer_disable();
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ save_processor_state();
+#endif
+
+ save_ftrace_enabled = __ftrace_enabled_save();
/* Interrupts aren't acceptable while we reboot */
local_irq_disable();
}
control_page = page_address(image->control_code_page);
- memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
+ memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE);
relocate_kernel_ptr = control_page;
page_list[PA_CONTROL_PAGE] = __pa(control_page);
(unsigned long)page_list,
image->start, cpu_has_pae,
image->preserve_context);
+
+#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context)
+ restore_processor_state();
+#endif
+
+ __ftrace_enabled_restore(save_ftrace_enabled);
}
void arch_crash_save_vmcoreinfo(void)
#include <linux/module.h>
#include <asm/geode.h>
+#define MFGPT_DEFAULT_IRQ 7
+
static struct mfgpt_timer_t {
unsigned int avail:1;
} mfgpt_timers[MFGPT_MAX_TIMERS];
}
EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
-int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
+int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
{
- u32 val, dummy;
- int offset;
+ u32 zsel, lpc, dummy;
+ int shift;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
- if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+ /*
+ * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
+ * is using the same CMP of the timer's Siamese twin, the IRQ is set to
+ * 2, and we mustn't use nor change it.
+ * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
+ * IRQ of the 1st. This can only happen if forcing an IRQ, calling this
+ * with *irq==0 is safe. Currently there _are_ no 2 drivers.
+ */
+ rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
+ shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
+ if (((zsel >> shift) & 0xF) == 2)
return -EIO;
- rdmsr(MSR_PIC_ZSEL_LOW, val, dummy);
+ /* Choose IRQ: if none supplied, keep IRQ already set or use default */
+ if (!*irq)
+ *irq = (zsel >> shift) & 0xF;
+ if (!*irq)
+ *irq = MFGPT_DEFAULT_IRQ;
- offset = (timer % 4) * 4;
-
- val &= ~((0xF << offset) | (0xF << (offset + 16)));
+ /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
+ if (*irq < 1 || *irq == 2 || *irq > 15)
+ return -EIO;
+ rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
+ if (lpc & (1 << *irq))
+ return -EIO;
+ /* All chosen and checked - go for it */
+ if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
+ return -EIO;
if (enable) {
- val |= (irq & 0x0F) << (offset);
- val |= (irq & 0x0F) << (offset + 16);
+ zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
+ wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
}
- wrmsr(MSR_PIC_ZSEL_LOW, val, dummy);
return 0;
}
static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
static u16 mfgpt_event_clock;
-static int irq = 7;
+static int irq;
static int __init mfgpt_setup(char *str)
{
get_option(&str, &irq);
mfgpt_event_clock = timer;
/* Set up the IRQ on the MFGPT side */
- if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) {
+ if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
return -EIO;
}
&mfgpt_clockevent);
printk(KERN_INFO
- "mfgpt-timer: registering the MFGPT timer as a clock event.\n");
+ "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
+ timer, irq);
clockevents_register_device(&mfgpt_clockevent);
return 0;
err:
- geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq);
+ geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
printk(KERN_ERR
"mfgpt-timer: Unable to set up the MFGPT clock source\n");
return -EIO;
{}
};
-void __init check_enable_amd_mmconf_dmi(void)
+void __cpuinit check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}
return sum & 0xFF;
}
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
{
int apicid;
char *bootup_cpu = "";
}
-static void construct_ioapic_table(int mpc_default_type)
+static void __init construct_ioapic_table(int mpc_default_type)
{
struct mpc_config_ioapic ioapic;
struct mpc_config_bus bus;
construct_default_ioirq_mptable(mpc_default_type);
}
#else
-static inline void construct_ioapic_table(int mpc_default_type) { }
+static inline void __init construct_ioapic_table(int mpc_default_type) { }
#endif
static inline void __init construct_default_ISA_mptable(int mpc_default_type)
u32 data[2];
u32 reg = *ppos;
int cpu = iminor(file->f_path.dentry->d_inode);
- int err;
+ int err = 0;
+ ssize_t bytes = 0;
if (count % 8)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 8) {
err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
- if (err)
- return -EIO;
- if (copy_to_user(tmp, &data, 8))
- return -EFAULT;
+ if (err) {
+ if (err == -EFAULT) /* Fix idiotic error code */
+ err = -EIO;
+ break;
+ }
+ if (copy_to_user(tmp, &data, 8)) {
+ err = -EFAULT;
+ break;
+ }
tmp += 2;
+ bytes += 8;
}
- return ((char __user *)tmp) - buf;
+ return bytes ? bytes : err;
}
static ssize_t msr_write(struct file *file, const char __user *buf,
u32 data[2];
u32 reg = *ppos;
int cpu = iminor(file->f_path.dentry->d_inode);
- int err;
+ int err = 0;
+ ssize_t bytes = 0;
if (count % 8)
return -EINVAL; /* Invalid chunk size */
for (; count; count -= 8) {
- if (copy_from_user(&data, tmp, 8))
- return -EFAULT;
+ if (copy_from_user(&data, tmp, 8)) {
+ err = -EFAULT;
+ break;
+ }
err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
- if (err)
- return -EIO;
+ if (err) {
+ if (err == -EFAULT) /* Fix idiotic error code */
+ err = -EIO;
+ break;
+ }
tmp += 2;
+ bytes += 8;
}
- return ((char __user *)tmp) - buf;
+ return bytes ? bytes : err;
}
static int msr_open(struct inode *inode, struct file *file)
ret = -EIO; /* MSR not supported */
out:
unlock_kernel();
- return 0;
+ return ret;
}
/*
}
#endif
+static void report_broken_nmi(int cpu, int *prev_nmi_count)
+{
+ printk(KERN_CONT "\n");
+
+ printk(KERN_WARNING
+ "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
+ cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
+
+ printk(KERN_WARNING
+ "Please report this to bugzilla.kernel.org,\n");
+ printk(KERN_WARNING
+ "and attach the output of the 'dmesg' command.\n");
+
+ per_cpu(wd_enabled, cpu) = 0;
+ atomic_dec(&nmi_active);
+}
+
int __init check_nmi_watchdog(void)
{
unsigned int *prev_nmi_count;
for_each_online_cpu(cpu) {
if (!per_cpu(wd_enabled, cpu))
continue;
- if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
- printk(KERN_WARNING "WARNING: CPU#%d: NMI "
- "appears to be stuck (%d->%d)!\n",
- cpu,
- prev_nmi_count[cpu],
- get_nmi_count(cpu));
- per_cpu(wd_enabled, cpu) = 0;
- atomic_dec(&nmi_active);
- }
+ if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
+ report_broken_nmi(cpu, prev_nmi_count);
}
endflag = 1;
if (!atomic_read(&nmi_active)) {
}
-void __init numaq_tsc_disable(void)
+void __cpuinit numaq_tsc_disable(void)
{
if (!found_numaq)
return;
.spin_unlock = __ticket_spin_unlock,
#endif
};
-EXPORT_SYMBOL_GPL(pv_lock_ops);
+EXPORT_SYMBOL(pv_lock_ops);
EXPORT_SYMBOL_GPL(pv_time_ops);
EXPORT_SYMBOL (pv_cpu_ops);
/* were we called with bad_dma_address? */
badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
- printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+ WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
"address 0x%Lx\n", dma_addr);
- WARN_ON(1);
return;
}
static int __init build_detail_arrays(void)
{
unsigned long ptr;
- int i, scal_detail_size, rio_detail_size;
+ unsigned numnodes, i;
+ int scal_detail_size, rio_detail_size;
- if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+ numnodes = rio_table_hdr->num_scal_dev;
+ if (numnodes > MAX_NUMNODES){
printk(KERN_WARNING
"Calgary: MAX_NUMNODES too low! Defined as %d, "
"but system has %d nodes.\n",
- MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+ MAX_NUMNODES, numnodes);
return -ENODEV;
}
}
ptr = ((unsigned long)rio_table_hdr) + 3;
- for (i = 0; i < rio_table_hdr->num_scal_dev;
- i++, ptr += scal_detail_size)
+ for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
scal_devs[i] = (struct scal_detail *)ptr;
for (i = 0; i < rio_table_hdr->num_rio_dev;
* Function for kdump case. Get the tce tables from first kernel
* by reading the contents of the base adress register of calgary iommu
*/
-static void get_tce_space_from_tar(void)
+static void __init get_tce_space_from_tar(void)
{
int bus;
void __iomem *target;
{
/* This must be done before dead CPU ack */
cpu_exit_clear();
- wbinvd();
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
* With physical CPU hotplug, we should halt the cpu
*/
local_irq_disable();
- while (1)
- halt();
+ /* mask all interrupts, flush any and all caches, and halt */
+ wbinvd_halt();
}
#else
static inline void play_dead(void)
static inline void play_dead(void)
{
idle_task_exit();
- wbinvd();
mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
local_irq_disable();
- while (1)
- halt();
+ /* mask all interrupts, flush any and all caches, and halt */
+ wbinvd_halt();
}
#else
static inline void play_dead(void)
#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
#define PAE_PGD_ATTR (_PAGE_PRESENT)
-/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
- * used to save some data for jumping back
+/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE
+ * ~ control_page + PAGE_SIZE are used as data storage and stack for
+ * jumping back
*/
-#define DATA(offset) (PAGE_SIZE/2+(offset))
+#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
/* Minimal CPU state */
#define ESP DATA(0x0)
popl %ebx
popl %ebp
ret
+
+ .globl kexec_control_code_size
+.set kexec_control_code_size, . - relocate_kernel
* @size: Size of the crashkernel memory to reserve.
* Returns the base address on success, and -1ULL on failure.
*/
-unsigned long long find_and_reserve_crashkernel(unsigned long long size)
+unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
{
const unsigned long long alignment = 16<<20; /* 16M */
unsigned long long start = 0LL;
early_cpu_init();
early_ioremap_init();
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
- /*
- * Must be before kernel pagetables are setup
- * or fixmap area is touched.
- */
- vmi_init();
-#endif
-
ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
screen_info = boot_params.screen_info;
edid_info = boot_params.edid_info;
parse_early_param();
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+ /*
+ * Must be before kernel pagetables are setup
+ * or fixmap area is touched.
+ */
+ vmi_init();
+#endif
+
/* after early param, so could get panic from serial */
reserve_early_setup_data();
}
#ifdef CONFIG_X86_64
+
+/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */
+static void __ref free_bootmem_pda(struct x8664_pda *oldpda)
+{
+ if (!after_bootmem)
+ free_bootmem((unsigned long)oldpda, sizeof(*oldpda));
+}
+
/*
* Allocate node local memory for the AP pda.
*
if (oldpda) {
memcpy(newpda, oldpda, size);
- if (!after_bootmem)
- free_bootmem((unsigned long)oldpda, size);
+ free_bootmem_pda(oldpda);
}
newpda->in_bootmem = 0;
flush_tlb_all();
low_mappings = 1;
-#ifdef CONFIG_X86_PC
- if (def_to_bigsmp && apicid > 8) {
- printk(KERN_WARNING
- "More than 8 CPUs detected - skipping them.\n"
- "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
- err = -1;
- } else
- err = do_boot_cpu(apicid, cpu);
-#else
err = do_boot_cpu(apicid, cpu);
-#endif
zap_low_mappings();
low_mappings = 0;
static int __init smp_sanity_check(unsigned max_cpus)
{
preempt_disable();
+
+#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32)
+ if (def_to_bigsmp && nr_cpu_ids > 8) {
+ unsigned int cpu;
+ unsigned nr;
+
+ printk(KERN_WARNING
+ "More than 8 CPUs detected - skipping them.\n"
+ "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n");
+
+ nr = 0;
+ for_each_present_cpu(cpu) {
+ if (nr >= 8)
+ cpu_clear(cpu, cpu_present_map);
+ nr++;
+ }
+
+ nr = 0;
+ for_each_possible_cpu(cpu) {
+ if (nr >= 8)
+ cpu_clear(cpu, cpu_possible_map);
+ nr++;
+ }
+
+ nr_cpu_ids = 8;
+ }
+#endif
+
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
"by the BIOS.\n", hard_smp_processor_id());
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+
+ if (is_uv_system())
+ uv_system_init();
out:
preempt_enable();
}
BUG();
}
#endif
-
-/*
- * If the BIOS enumerates physical processors before logical,
- * maxcpus=N at enumeration-time can be used to disable HT.
- */
-static int __init parse_maxcpus(char *arg)
-{
- extern unsigned int maxcpus;
-
- if (arg)
- maxcpus = simple_strtoul(arg, NULL, 0);
- return 0;
-}
-early_param("maxcpus", parse_maxcpus);
DEFINE_PER_CPU(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-/* Initialize the CPU's GDT. This is either the boot CPU doing itself
- (still using the master per-cpu area), or a CPU doing it for a
- secondary which will soon come up. */
+/*
+ * Initialize the CPU's GDT. This is either the boot CPU doing itself
+ * (still using the master per-cpu area), or a CPU doing it for a
+ * secondary which will soon come up.
+ */
__cpuinit void init_gdt(int cpu)
{
- struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+ struct desc_struct gdt;
- pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
- __per_cpu_offset[cpu], 0xFFFFF,
+ pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF,
0x2 | DESCTYPE_S, 0x8);
+ gdt.s = 1;
- gdt[GDT_ENTRY_PERCPU].s = 1;
+ write_gdt_entry(get_cpu_gdt_table(cpu),
+ GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
per_cpu(cpu_number, cpu) = cpu;
#include <asm/genapic.h>
#include <asm/idle.h>
#include <asm/tsc.h>
+#include <asm/irq_vectors.h>
#include <mach_apic.h>
uv_init_blade(blade, node, cur_cpu);
cur_cpu += uv_blade_nr_possible_cpus(blade);
}
- set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+ alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
return 0;
/*
* Read TSC and the reference counters. Take care of SMI disturbance
*/
-static u64 __init tsc_read_refs(u64 *pm, u64 *hpet)
+static u64 tsc_read_refs(u64 *pm, u64 *hpet)
{
u64 t1, t2;
int i;
mark_tsc_unstable("cpufreq changes");
}
- set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+ set_cyc2ns_scale(tsc_khz, freq->cpu);
return 0;
}
static int __init cpufreq_tsc(void)
{
+ if (!cpu_has_tsc)
+ return 0;
+ if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ return 0;
cpufreq_register_notifier(&time_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
return 0;
__raw_spin_unlock(&sync_lock);
}
}
- if (!(now-start)) {
- printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+ WARN(!(now-start),
+ "Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
now-start, end-start);
- WARN_ON(1);
- }
}
/*
return 1;
}
-extern unsigned int __cpuinitdata maxcpus;
-
/*
* The Visual Workstation is Intel MP compliant in the hardware
* sense, but it doesn't have a BIOS(-configuration table).
ncpus = CO_CPU_MAX;
}
- if (ncpus > maxcpus)
- ncpus = maxcpus;
+ if (ncpus > setup_max_cpus)
+ ncpus = setup_max_cpus;
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
DWARF_DEBUG
}
+
+#ifdef CONFIG_KEXEC
+/* Link time checks */
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
rv.msr_no = msr_no;
if (safe) {
- smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
- err = rv.err;
+ err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+ &rv, 1);
+ err = err ? err : rv.err;
} else {
- smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+ err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
}
*l = rv.l;
*h = rv.h;
rv.l = l;
rv.h = h;
if (safe) {
- smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
- err = rv.err;
+ err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+ &rv, 1);
+ err = err ? err : rv.err;
} else {
- smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+ err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
}
return err;
}
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
{
- _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+ return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
}
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
- _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+ return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
}
/* These "safe" variants are slower and should be used when the target MSR
#include <asm/uaccess.h>
#include <asm/mmx.h>
+#ifdef CONFIG_X86_INTEL_USERCOPY
+/*
+ * Alignment at which movsl is preferred for bulk memory copies.
+ */
+struct movsl_mask movsl_mask __read_mostly;
+#endif
+
static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned long n)
{
#ifdef CONFIG_X86_INTEL_USERCOPY
#include <linux/list.h>
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <linux/version.h>
#include <linux/leds.h>
#include <asm/gpio.h>
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-int direct_gbpages __meminitdata
+int direct_gbpages
#ifdef CONFIG_DIRECT_GBPAGES
= 1
#endif
int after_bootmem;
-static __init void *spp_getpage(void)
+/*
+ * NOTE: This function is marked __ref because it calls __init function
+ * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
+ */
+static __ref void *spp_getpage(void)
{
void *ptr;
static unsigned long __meminitdata table_end;
static unsigned long __meminitdata table_top;
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
{
unsigned long pfn = table_end++;
void *adr;
return adr;
}
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
{
if (after_bootmem)
return;
{
unsigned long pages = 0;
unsigned long last_map_addr = end;
+ unsigned long start = address;
int i = pmd_index(address);
}
if (pmd_val(*pmd)) {
- if (!pmd_large(*pmd))
+ if (!pmd_large(*pmd)) {
+ spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pte_update(pmd, address,
- end);
+ end);
+ spin_unlock(&init_mm.page_table_lock);
+ }
+ /* Count entries we're using from level2_ident_pgt */
+ if (start == 0)
+ pages++;
continue;
}
if (page_size_mask & (1<<PG_LEVEL_2M)) {
pages++;
+ spin_lock(&init_mm.page_table_lock);
set_pte((pte_t *)pmd,
pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+ spin_unlock(&init_mm.page_table_lock);
last_map_addr = (address & PMD_MASK) + PMD_SIZE;
continue;
}
last_map_addr = phys_pte_init(pte, address, end);
unmap_low_page(pte);
+ spin_lock(&init_mm.page_table_lock);
pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+ spin_unlock(&init_mm.page_table_lock);
}
update_page_count(PG_LEVEL_2M, pages);
return last_map_addr;
pmd_t *pmd = pmd_offset(pud, 0);
unsigned long last_map_addr;
- spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
- spin_unlock(&init_mm.page_table_lock);
__flush_tlb_all();
return last_map_addr;
}
if (page_size_mask & (1<<PG_LEVEL_1G)) {
pages++;
+ spin_lock(&init_mm.page_table_lock);
set_pte((pte_t *)pud,
pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+ spin_unlock(&init_mm.page_table_lock);
last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
continue;
}
pmd = alloc_low_page(&pmd_phys);
-
- spin_lock(&init_mm.page_table_lock);
last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
unmap_low_page(pmd);
+
+ spin_lock(&init_mm.page_table_lock);
pud_populate(&init_mm, pud, __va(pmd_phys));
spin_unlock(&init_mm.page_table_lock);
-
}
__flush_tlb_all();
update_page_count(PG_LEVEL_1G, pages);
continue;
}
- if (after_bootmem)
- pud = pud_offset(pgd, start & PGDIR_MASK);
- else
- pud = alloc_low_page(&pud_phys);
-
+ pud = alloc_low_page(&pud_phys);
last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
page_size_mask);
unmap_low_page(pud);
- pgd_populate(&init_mm, pgd_offset_k(start),
- __va(pud_phys));
+
+ spin_lock(&init_mm.page_table_lock);
+ pgd_populate(&init_mm, pgd, __va(pud_phys));
+ spin_unlock(&init_mm.page_table_lock);
}
return last_map_addr;
phys_addr &= PAGE_MASK;
size = PAGE_ALIGN(last_addr+1) - phys_addr;
- retval = reserve_memtype(phys_addr, phys_addr + size,
+ retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
prot_val, &new_prot_val);
if (retval) {
pr_debug("Warning: reserve_memtype returned %d\n", retval);
{
if (!early_ioremap_nested)
return 0;
-
- printk(KERN_WARNING
+ WARN(1, KERN_WARNING
"Debug warning: early ioremap leak of %d areas detected.\n",
- early_ioremap_nested);
+ early_ioremap_nested);
printk(KERN_WARNING
- "please boot with early_ioremap_debug and report the dmesg.\n");
- WARN_ON(1);
+ "please boot with early_ioremap_debug and report the dmesg.\n");
return 1;
}
"may miss events.\n");
}
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+ but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
{
int cpu;
int err;
failed += print_split(&sc);
if (failed) {
- printk(KERN_ERR "NOT PASSED. Please report.\n");
- WARN_ON(1);
+ WARN(1, KERN_ERR "NOT PASSED. Please report.\n");
return -EINVAL;
} else {
if (print)
int arch_report_meminfo(char *page)
{
- int n = sprintf(page, "DirectMap4k: %8lu\n"
- "DirectMap2M: %8lu\n",
- direct_pages_count[PG_LEVEL_4K],
- direct_pages_count[PG_LEVEL_2M]);
+ int n = sprintf(page, "DirectMap4k: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_4K] << 2);
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+ n += sprintf(page + n, "DirectMap2M: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_2M] << 11);
+#else
+ n += sprintf(page + n, "DirectMap4M: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_2M] << 12);
+#endif
#ifdef CONFIG_X86_64
- n += sprintf(page + n, "DirectMap1G: %8lu\n",
- direct_pages_count[PG_LEVEL_1G]);
+ if (direct_gbpages)
+ n += sprintf(page + n, "DirectMap1G: %8lu kB\n",
+ direct_pages_count[PG_LEVEL_1G] << 20);
#endif
return n;
}
if (!pte_val(old_pte)) {
if (!primary)
return 0;
- printk(KERN_WARNING "CPA: called for zero pte. "
+ WARN(1, KERN_WARNING "CPA: called for zero pte. "
"vaddr = %lx cpa->vaddr = %lx\n", address,
cpa->vaddr);
- WARN_ON(1);
return -EINVAL;
}
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
- if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
_PAGE_CACHE_UC_MINUS, NULL))
return -EINVAL;
if (!pat_enabled)
return set_memory_uc(addr, numpages);
- if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+ if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
_PAGE_CACHE_WC, NULL))
return -EINVAL;
int set_memory_wb(unsigned long addr, int numpages)
{
- free_memtype(addr, addr + numpages * PAGE_SIZE);
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
return _set_memory_wb(addr, numpages);
}
return -EBUSY;
}
+static struct memtype *cached_entry;
+static u64 cached_start;
+
/*
* req_type typically has one of the:
* - _PAGE_CACHE_WB
spin_lock(&memtype_lock);
+ if (cached_entry && start >= cached_start)
+ entry = cached_entry;
+ else
+ entry = list_entry(&memtype_list, struct memtype, nd);
+
/* Search for existing mapping that overlaps the current range */
where = NULL;
- list_for_each_entry(entry, &memtype_list, nd) {
+ list_for_each_entry_continue(entry, &memtype_list, nd) {
if (end <= entry->start) {
where = entry->nd.prev;
+ cached_entry = list_entry(where, struct memtype, nd);
break;
} else if (start <= entry->start) { /* end > entry->start */
err = chk_conflict(new, entry, new_type);
dprintk("Overlap at 0x%Lx-0x%Lx\n",
entry->start, entry->end);
where = entry->nd.prev;
+ cached_entry = list_entry(where,
+ struct memtype, nd);
}
break;
} else if (start < entry->end) { /* start > entry->start */
if (!err) {
dprintk("Overlap at 0x%Lx-0x%Lx\n",
entry->start, entry->end);
- where = &entry->nd;
+ cached_entry = list_entry(entry->nd.prev,
+ struct memtype, nd);
+
+ /*
+ * Move to right position in the linked
+ * list to add this new entry
+ */
+ list_for_each_entry_continue(entry,
+ &memtype_list, nd) {
+ if (start <= entry->start) {
+ where = entry->nd.prev;
+ break;
+ }
+ }
}
break;
}
return err;
}
+ cached_start = start;
+
if (where)
list_add(&new->nd, where);
else
spin_lock(&memtype_lock);
list_for_each_entry(entry, &memtype_list, nd) {
if (entry->start == start && entry->end == end) {
+ if (cached_entry == entry || cached_start == start)
+ cached_entry = NULL;
+
list_del(&entry->nd);
kfree(entry);
err = 0;
}
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- * inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- * X drivers.
- */
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
unsigned long size, pgprot_t *vma_prot)
{
u64 offset = ((u64) pfn) << PAGE_SHIFT;
- unsigned long flags = _PAGE_CACHE_UC_MINUS;
+ unsigned long flags = -1;
int retval;
if (!range_is_allowed(pfn, size))
return 0;
if (file->f_flags & O_SYNC) {
- flags = _PAGE_CACHE_UC;
+ flags = _PAGE_CACHE_UC_MINUS;
}
#ifdef CONFIG_X86_32
#endif
/*
- * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+ * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+ *
* Without O_SYNC, we want to get
* - WB for WB-able memory and no other conflicting mappings
* - UC_MINUS for non-WB-able memory with no other conflicting mappings
* - Inherit from confliting mappings otherwise
*/
- if (flags != _PAGE_CACHE_UC_MINUS) {
+ if (flags != -1) {
retval = reserve_memtype(offset, offset + size, flags, NULL);
} else {
retval = reserve_memtype(offset, offset + size, -1, &flags);
* start of the node, and that the current "end" address is after
* the previous one.
*/
-static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
+static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk)
{
/*
* Only add present memory as told by the e820.
if (memory_chunk->start_pfn >= max_pfn) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
memory_chunk->start_pfn, memory_chunk->end_pfn);
- return;
+ return -1;
}
if (memory_chunk->nid != nid)
- return;
+ return -1;
if (!node_has_online_mem(nid))
node_start_pfn[nid] = memory_chunk->start_pfn;
if (node_end_pfn[nid] < memory_chunk->end_pfn)
node_end_pfn[nid] = memory_chunk->end_pfn;
+
+ return 0;
}
int __init get_memcfg_from_srat(void)
printk(KERN_DEBUG
"chunk %d nid %d start_pfn %08lx end_pfn %08lx\n",
j, chunk->nid, chunk->start_pfn, chunk->end_pfn);
- node_read_chunk(chunk->nid, chunk);
+ if (node_read_chunk(chunk->nid, chunk))
+ continue;
+
e820_register_active_regions(chunk->nid, chunk->start_pfn,
min(chunk->end_pfn, max_pfn));
}
#include <linux/slab.h>
#include <linux/moduleparam.h>
#include <linux/kdebug.h>
+#include <linux/cpu.h>
#include <asm/nmi.h>
#include <asm/msr.h>
#include <asm/apic.h>
static int nmi_start(void);
static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
/* 0 == registered but off, 1 == registered and on */
static int nmi_enabled = 0;
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+ void *data)
+{
+ int cpu = (unsigned long)data;
+ switch (action) {
+ case CPU_DOWN_FAILED:
+ case CPU_ONLINE:
+ smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+ break;
+ case CPU_DOWN_PREPARE:
+ smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+ break;
+ }
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+ .notifier_call = oprofile_cpu_notifier
+};
+#endif
+
#ifdef CONFIG_PM
static int nmi_suspend(struct sys_device *dev, pm_message_t state)
{
+ /* Only one CPU left, just stop that one */
if (nmi_enabled == 1)
- nmi_stop();
+ nmi_cpu_stop(NULL);
return 0;
}
static int nmi_resume(struct sys_device *dev)
{
if (nmi_enabled == 1)
- nmi_start();
+ nmi_cpu_start(NULL);
return 0;
}
}
init_sysfs();
+#ifdef CONFIG_SMP
+ register_cpu_notifier(&oprofile_cpu_nb);
+#endif
using_nmi = 1;
ops->create_files = nmi_create_files;
ops->setup = nmi_setup;
void op_nmi_exit(void)
{
- if (using_nmi)
+ if (using_nmi) {
exit_sysfs();
+#ifdef CONFIG_SMP
+ unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+ }
}
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/topology.h>
+#include <linux/cpu.h>
#include "pci.h"
#ifdef CONFIG_X86_64
return 0;
}
-postcore_initcall(early_fill_mp_bus_info);
+#else /* !CONFIG_X86_64 */
-#endif
+static int __init early_fill_mp_bus_info(void) { return 0; }
+
+#endif /* !CONFIG_X86_64 */
/* common 32/64 bit code */
#define ENABLE_CF8_EXT_CFG (1ULL << 46)
-static void enable_pci_io_ecs_per_cpu(void *unused)
+static void enable_pci_io_ecs(void *unused)
{
u64 reg;
rdmsrl(MSR_AMD64_NB_CFG, reg);
}
}
-static int __init enable_pci_io_ecs(void)
+static int __cpuinit amd_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
{
+ int cpu = (long)hcpu;
+ switch(action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+ .notifier_call = amd_cpu_notify,
+};
+
+static int __init pci_io_ecs_init(void)
+{
+ int cpu;
+
/* assume all cpus from fam10h have IO ECS */
if (boot_cpu_data.x86 < 0x10)
return 0;
- on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+
+ register_cpu_notifier(&amd_cpu_notifier);
+ for_each_online_cpu(cpu)
+ amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
+ (void *)(long)cpu);
pci_probe |= PCI_HAS_IO_ECS;
+
+ return 0;
+}
+
+static int __init amd_postcore_init(void)
+{
+ if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+ return 0;
+
+ early_fill_mp_bus_info();
+ pci_io_ecs_init();
+
return 0;
}
-postcore_initcall(enable_pci_io_ecs);
+postcore_initcall(amd_postcore_init);
#include <linux/ioport.h>
#include <linux/errno.h>
#include <linux/bootmem.h>
+#include <linux/acpi.h>
#include <asm/pat.h>
+#include <asm/hpet.h>
+#include <asm/io_apic.h>
#include "pci.h"
}
EXPORT_SYMBOL(pcibios_align_resource);
+static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
+{
+ unsigned long base;
+ unsigned long size;
+ int i;
+
+ base = res->start;
+ size = (res->start == 0 && res->end == res->start) ? 0 :
+ (res->end - res->start + 1);
+
+ if (!base || !size)
+ return 0;
+
+#ifdef CONFIG_HPET_TIMER
+ /* for hpet */
+ if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
+ dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
+ base, base + size - 1);
+ return 1;
+ }
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+ for (i = 0; i < nr_ioapics; i++) {
+ unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
+
+ if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
+ dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
+ base, base + size - 1);
+ return 1;
+ }
+ }
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+ for (i = 0; i < pci_mmcfg_config_num; i++) {
+ unsigned long addr;
+
+ addr = pci_mmcfg_config[i].address;
+ if (base == addr && (res->flags & IORESOURCE_MEM)) {
+ dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
+ base, base + size - 1);
+ return 1;
+ }
+ }
+#endif
+
+ return 0;
+}
+
+static int check_platform(struct pci_dev *dev, struct resource *res)
+{
+ struct resource *root = NULL;
+
+ /*
+ * forcibly insert it into the
+ * resource tree
+ */
+ if (res->flags & IORESOURCE_MEM)
+ root = &iomem_resource;
+ else if (res->flags & IORESOURCE_IO)
+ root = &ioport_resource;
+
+ if (root && check_res_with_valid(dev, res)) {
+ insert_resource(root, res);
+
+ return 1;
+ }
+
+ return 0;
+}
/*
* Handle resources of PCI devices. If the world were perfect, we could
* just allocate all the resource regions and do nothing more. It isn't.
pr = pci_find_parent_resource(dev, r);
if (!r->start || !pr ||
request_resource(pr, r) < 0) {
+ if (check_platform(dev, r))
+ continue;
dev_err(&dev->dev, "BAR %d: can't "
"allocate resource\n", idx);
/*
r->flags, disabled, pass);
pr = pci_find_parent_resource(dev, r);
if (!pr || request_resource(pr, r) < 0) {
+ if (check_platform(dev, r))
+ continue;
dev_err(&dev->dev, "BAR %d: can't "
"allocate resource\n", idx);
/* We'll assign a new address later */
case PCI_DEVICE_ID_INTEL_ICH10_1:
case PCI_DEVICE_ID_INTEL_ICH10_2:
case PCI_DEVICE_ID_INTEL_ICH10_3:
+ case PCI_DEVICE_ID_INTEL_PCH_0:
+ case PCI_DEVICE_ID_INTEL_PCH_1:
r->name = "PIIX/ICH";
r->get = pirq_piix_get;
r->set = pirq_piix_set;
int n, devfn;
long node;
- if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+ if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
return;
DBG("PCI: Peer bridge fixup\n");
return AE_OK;
}
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
{
struct resource mcfg_res;
return mcfg_res.flags;
}
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+ u64 addr, u64 size, int i,
+ typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+ u64 old_size = size;
+ int valid = 0;
+
+ while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+ size >>= 1;
+ if (size < (16UL<<20))
+ break;
+ }
+
+ if (size >= (16UL<<20) || size == old_size) {
+ printk(KERN_NOTICE
+ "PCI: MCFG area at %Lx reserved in %s\n",
+ addr, with_e820?"E820":"ACPI motherboard resources");
+ valid = 1;
+
+ if (old_size != size) {
+ /* update end_bus_number */
+ cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+ printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+ "segment %hu buses %u - %u\n",
+ i, (unsigned long)cfg->address, cfg->pci_segment,
+ (unsigned int)cfg->start_bus_number,
+ (unsigned int)cfg->end_bus_number);
+ }
+ }
+
+ return valid;
+}
+
static void __init pci_mmcfg_reject_broken(int early)
{
typeof(pci_mmcfg_config[0]) *cfg;
for (i = 0; i < pci_mmcfg_config_num; i++) {
int valid = 0;
- u32 size = (cfg->end_bus_number + 1) << 20;
+ u64 addr, size;
+
cfg = &pci_mmcfg_config[i];
+ addr = cfg->start_bus_number;
+ addr <<= 20;
+ addr += cfg->address;
+ size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+ size <<= 20;
printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
"segment %hu buses %u - %u\n",
i, (unsigned long)cfg->address, cfg->pci_segment,
(unsigned int)cfg->start_bus_number,
(unsigned int)cfg->end_bus_number);
- if (!early &&
- is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
- printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
- "in ACPI motherboard resources\n",
- cfg->address);
- valid = 1;
- }
+ if (!early)
+ valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
if (valid)
continue;
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
" reserved in ACPI motherboard resources\n",
cfg->address);
+
/* Don't try to do this check unless configuration
type 1 is available. how about type 2 ?*/
- if (raw_pci_ops && e820_all_mapped(cfg->address,
- cfg->address + size - 1,
- E820_RESERVED)) {
- printk(KERN_NOTICE
- "PCI: MCFG area at %Lx reserved in E820\n",
- cfg->address);
- valid = 1;
- }
+ if (raw_pci_ops)
+ valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
if (!valid)
goto reject;
return;
reject:
- printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
+ printk(KERN_INFO "PCI: Not using MMCONFIG.\n");
pci_mmcfg_arch_free();
kfree(pci_mmcfg_config);
pci_mmcfg_config = NULL;
ctxt->cr0 = read_cr0();
ctxt->cr2 = read_cr2();
ctxt->cr3 = read_cr3();
- ctxt->cr4 = read_cr4();
+ ctxt->cr4 = read_cr4_safe();
}
/* Needed by apm.c */
/*
* control registers
*/
- write_cr4(ctxt->cr4);
+ /* cr4 was introduced in the Pentium CPU */
+ if (ctxt->cr4)
+ write_cr4(ctxt->cr4);
write_cr3(ctxt->cr3);
write_cr2(ctxt->cr2);
write_cr0(ctxt->cr0);
ret
ENTRY(restore_image)
- movl resume_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl resume_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
movl restore_pblist, %edx
.p2align 4,,7
done:
/* go back to the original page tables */
- movl $swapper_pg_dir, %ecx
- subl $__PAGE_OFFSET, %ecx
- movl %ecx, %cr3
+ movl $swapper_pg_dir, %eax
+ subl $__PAGE_OFFSET, %eax
+ movl %eax, %cr3
/* Flush TLB, including "global" things (vmalloc) */
- movl mmu_cr4_features, %eax
- movl %eax, %edx
+ movl mmu_cr4_features, %ecx
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %edx
andl $~(1<<7), %edx; # PGE
movl %edx, %cr4; # turn off PGE
- movl %cr3, %ecx; # flush TLB
- movl %ecx, %cr3
- movl %eax, %cr4; # turn PGE back on
+1:
+ movl %cr3, %eax; # flush TLB
+ movl %eax, %cr3
+ jecxz 1f # cr4 Pentium and higher, skip if zero
+ movl %ecx, %cr4; # turn PGE back on
+1:
movl saved_context_esp, %esp
movl saved_context_ebp, %ebp
/* iterator */
static int find_start(struct device *dev, void *data)
{
- loff_t k = *(loff_t *)data;
+ loff_t *k = data;
if (dev->type != &disk_type)
return 0;
- if (!k--)
+ if (!*k)
return 1;
+ (*k)--;
return 0;
}
static void *part_start(struct seq_file *part, loff_t *pos)
{
struct device *dev;
- loff_t n = *pos;
+ loff_t k = *pos;
- if (!n)
+ if (!k)
seq_puts(part, "major minor #blocks name\n\n");
mutex_lock(&block_class_lock);
- dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &k, find_start);
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
struct device *dev;
++*pos;
dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
- if (dev)
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
static void *diskstats_start(struct seq_file *part, loff_t *pos)
{
struct device *dev;
+ loff_t k = *pos;
mutex_lock(&block_class_lock);
- dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &k, find_start);
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
++*pos;
dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
- if (dev)
+ if (dev) {
+ put_device(dev);
return dev_to_disk(dev);
+ }
return NULL;
}
mutex_lock(&block_class_lock);
find.name = name;
find.part = part;
- dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
- if (dev)
+ dev = class_find_device(&block_class, NULL, &find, match_id);
+ if (dev) {
+ put_device(dev);
devt = MKDEV(MAJOR(dev->devt),
MINOR(dev->devt) + part);
+ }
mutex_unlock(&block_class_lock);
return devt;
static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
int err)
{
+ struct aead_request *areq = req->data;
+
if (!err) {
- struct aead_request *areq = req->data;
struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
struct ablkcipher_request *abreq = aead_request_ctx(areq);
err = crypto_authenc_genicv(areq, iv, 0);
}
- aead_request_complete(req->data, err);
+ aead_request_complete(areq, err);
}
static int crypto_authenc_encrypt(struct aead_request *req)
static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
int err)
{
+ struct aead_request *areq = req->data;
+
if (!err) {
- struct aead_request *areq = req->data;
struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
err = crypto_authenc_genicv(areq, greq->giv, 0);
}
- aead_request_complete(req->data, err);
+ aead_request_complete(areq, err);
}
static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
*/
static int handle_eject_request(struct dock_station *ds, u32 event)
{
- if (!dock_present(ds))
- return -ENODEV;
-
if (dock_in_progress(ds))
return -EBUSY;
* here we need to generate the undock
* event prior to actually doing the undock
* so that the device struct still exists.
+ * Also, even send the dock event if the
+ * device is not present anymore
*/
dock_event(ds, event, UNDOCK_EVENT);
+
+ if (!dock_present(ds)) {
+ complete_undock(ds);
+ return -ENODEV;
+ }
+
hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST);
undock(ds);
eject_dock(ds);
u8 handlers_installed;
} *boot_ec, *first_ec;
+/*
+ * Some Asus system have exchanged ECDT data/command IO addresses.
+ */
+static int print_ecdt_error(const struct dmi_system_id *id)
+{
+ printk(KERN_NOTICE PREFIX "%s detected - "
+ "ECDT has exchanged control/data I/O address\n",
+ id->ident);
+ return 0;
+}
+
+static struct dmi_system_id __cpuinitdata ec_dmi_table[] = {
+ {
+ print_ecdt_error, "Asus L4R", {
+ DMI_MATCH(DMI_BIOS_VERSION, "1008.006"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "L4R"),
+ DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL},
+ {
+ print_ecdt_error, "Asus M6R", {
+ DMI_MATCH(DMI_BIOS_VERSION, "0207"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M6R"),
+ DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL},
+ {},
+};
+
/* --------------------------------------------------------------------------
Transaction Management
-------------------------------------------------------------------------- */
return 0;
msleep(1);
}
+ if (acpi_ec_check_status(ec,event))
+ return 0;
}
pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
acpi_ec_read_status(ec),
pr_info(PREFIX "EC description table is found, configuring boot EC\n");
boot_ec->command_addr = ecdt_ptr->control.address;
boot_ec->data_addr = ecdt_ptr->data.address;
+ if (dmi_check_system(ec_dmi_table)) {
+ /*
+ * If the board falls into ec_dmi_table, it means
+ * that ECDT table gives the incorrect command/status
+ * & data I/O address. Just fix it.
+ */
+ boot_ec->data_addr = ecdt_ptr->control.address;
+ boot_ec->command_addr = ecdt_ptr->data.address;
+ }
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
acpi_tb_set_table_loaded_flag(table_index, FALSE);
+ /* Table unloaded, remove a reference to the ddb_handle object */
+
+ acpi_ut_remove_reference(ddb_handle);
return_ACPI_STATUS(AE_OK);
}
* Size - Size of the pathname
* *name_buffer - Where to return the pathname
*
- * RETURN: Places the pathname into the name_buffer, in external format
+ * RETURN: Status
+ * Places the pathname into the name_buffer, in external format
* (name segments separated by path separators)
*
* DESCRIPTION: Generate a full pathaname
*
******************************************************************************/
-void
+acpi_status
acpi_ns_build_external_path(struct acpi_namespace_node *node,
acpi_size size, char *name_buffer)
{
if (index < ACPI_NAME_SIZE) {
name_buffer[0] = AML_ROOT_PREFIX;
name_buffer[1] = 0;
- return;
+ return (AE_OK);
}
/* Store terminator byte, then build name backwards */
if (index != 0) {
ACPI_ERROR((AE_INFO,
- "Could not construct pathname; index=%X, size=%X, Path=%s",
+ "Could not construct external pathname; index=%X, size=%X, Path=%s",
(u32) index, (u32) size, &name_buffer[size]));
+
+ return (AE_BAD_PARAMETER);
}
- return;
+ return (AE_OK);
}
#ifdef ACPI_DEBUG_OUTPUT
char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
{
+ acpi_status status;
char *name_buffer;
acpi_size size;
size = acpi_ns_get_pathname_length(node);
if (!size) {
- ACPI_ERROR((AE_INFO, "Invalid node failure"));
- return_PTR(NULL);
+ return (NULL);
}
/* Allocate a buffer to be returned to caller */
/* Build the path in the allocated buffer */
- acpi_ns_build_external_path(node, size, name_buffer);
+ status = acpi_ns_build_external_path(node, size, name_buffer);
+ if (ACPI_FAILURE(status)) {
+ return (NULL);
+ }
+
return_PTR(name_buffer);
}
#endif
while (next_node && (next_node != acpi_gbl_root_node)) {
if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) {
ACPI_ERROR((AE_INFO,
- "Invalid NS Node (%p) while traversing path",
+ "Invalid Namespace Node (%p) while traversing namespace",
next_node));
return 0;
}
required_size = acpi_ns_get_pathname_length(node);
if (!required_size) {
- ACPI_ERROR((AE_INFO, "Invalid node failure"));
- return_ACPI_STATUS(AE_ERROR);
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Validate/Allocate/Clear caller buffer */
/* Build the path in the caller buffer */
- acpi_ns_build_external_path(node, required_size, buffer->pointer);
+ status =
+ acpi_ns_build_external_path(node, required_size, buffer->pointer);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n",
(char *)buffer->pointer, (u32) required_size));
if (irq < 0)
continue;
- if (irq >= ACPI_MAX_IRQS)
+ if (irq >= ARRAY_SIZE(acpi_irq_penalty))
continue;
if (used)
*/
void acpi_penalize_isa_irq(int irq, int active)
{
- if (active)
- acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
- else
- acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+ if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) {
+ if (active)
+ acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED;
+ else
+ acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING;
+ }
}
/*
static int set_no_mwait(const struct dmi_system_id *id)
{
printk(KERN_NOTICE PREFIX "%s detected - "
- "disable mwait for CPU C-stetes\n", id->ident);
+ "disabling mwait for CPU C-states\n", id->ident);
idle_nomwait = 1;
return 0;
}
#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
-#include <linux/cpuidle.h>
/*
* Include the apic definitions for x86 to have the APIC timer related defines
* 0 -> cpufreq low level drivers initialized -> consider _PPC values
* 1 -> ignore _PPC totally -> forced by user through boot param
*/
-static unsigned int ignore_ppc = -1;
+static int ignore_ppc = -1;
module_param(ignore_ppc, uint, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
"limited by BIOS, this should help");
} else {
temp_size_needed +=
acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
+ if (!temp_size_needed) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
}
} else {
/*
{
acpi_status status = AE_OK;
- if (!required_length) {
- WARN_ON(1);
- return AE_ERROR;
+ /* Parameter validation */
+
+ if (!buffer || !required_length) {
+ return (AE_BAD_PARAMETER);
}
+
switch (buffer->length) {
case ACPI_NO_BUFFER:
obj_pointer = object->package.elements;
break;
+ /*
+ * These objects have a possible list of notify handlers.
+ * Device object also may have a GPE block.
+ */
case ACPI_TYPE_DEVICE:
if (object->device.gpe_block) {
gpe_block);
}
- /* Walk the handler list for this device */
+ /*lint -fallthrough */
+
+ case ACPI_TYPE_PROCESSOR:
+ case ACPI_TYPE_THERMAL:
+
+ /* Walk the notify handler list for this object */
- handler_desc = object->device.handler;
+ handler_desc = object->common_notify.handler;
while (handler_desc) {
next_desc = handler_desc->address_space.next;
acpi_ut_remove_reference(handler_desc);
acpi_size * obj_length)
{
acpi_size length;
+ acpi_size size;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object);
* Get the actual length of the full pathname to this object.
* The reference will be converted to the pathname to the object
*/
- length +=
- ACPI_ROUND_UP_TO_NATIVE_WORD
- (acpi_ns_get_pathname_length
- (internal_object->reference.node));
+ size =
+ acpi_ns_get_pathname_length(internal_object->
+ reference.node);
+ if (!size) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ length += ACPI_ROUND_UP_TO_NATIVE_WORD(size);
break;
default:
strcpy(method, "WQ");
strncat(method, block->object_id, 2);
- status = acpi_evaluate_object(handle, method, NULL, out);
+ status = acpi_evaluate_object(handle, method, &input, out);
/*
* If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+ { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
- { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */
- { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */
- { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
+ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
+ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH10) */
{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+ /* SATA Controller IDE (PCH) */
+ { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
{ } /* terminate list */
};
unsigned long xfer_mask;
unsigned int horkage_on;
unsigned int horkage_off;
+ unsigned int lflags;
};
struct ata_force_ent {
}
/**
- * ata_force_spd_limit - force SATA spd limit according to libata.force
+ * ata_force_link_limits - force link limits according to libata.force
* @link: ATA link of interest
*
- * Force SATA spd limit according to libata.force and whine about
- * it. When only the port part is specified (e.g. 1:), the limit
- * applies to all links connected to both the host link and all
- * fan-out ports connected via PMP. If the device part is
- * specified as 0 (e.g. 1.00:), it specifies the first fan-out
- * link not the host link. Device number 15 always points to the
- * host link whether PMP is attached or not.
+ * Force link flags and SATA spd limit according to libata.force
+ * and whine about it. When only the port part is specified
+ * (e.g. 1:), the limit applies to all links connected to both
+ * the host link and all fan-out ports connected via PMP. If the
+ * device part is specified as 0 (e.g. 1.00:), it specifies the
+ * first fan-out link not the host link. Device number 15 always
+ * points to the host link whether PMP is attached or not.
*
* LOCKING:
* EH context.
*/
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
{
+ bool did_spd = false;
int linkno, i;
if (ata_is_host_link(link))
if (fe->device != -1 && fe->device != linkno)
continue;
- if (!fe->param.spd_limit)
- continue;
+ /* only honor the first spd limit */
+ if (!did_spd && fe->param.spd_limit) {
+ link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: PHY spd limit set to %s\n",
+ fe->param.name);
+ did_spd = true;
+ }
- link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
- ata_link_printk(link, KERN_NOTICE,
- "FORCE: PHY spd limit set to %s\n", fe->param.name);
- return;
+ /* let lflags stack */
+ if (fe->param.lflags) {
+ link->flags |= fe->param.lflags;
+ ata_link_printk(link, KERN_NOTICE,
+ "FORCE: link flag 0x%x forced -> 0x%x\n",
+ fe->param.lflags, link->flags);
+ }
}
}
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
found = 1;
- if (dev->dma_mode != 0xff)
+ if (ata_dma_enabled(dev))
used_dma = 1;
}
if (!found)
/* step 3: set host DMA timings */
ata_link_for_each_dev(dev, link) {
- if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+ if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
continue;
dev->xfer_mode = dev->dma_mode;
*/
int sata_link_init_spd(struct ata_link *link)
{
- u32 scontrol;
u8 spd;
int rc;
- rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+ rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
if (rc)
return rc;
- spd = (scontrol >> 4) & 0xf;
+ spd = (link->saved_scontrol >> 4) & 0xf;
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
- ata_force_spd_limit(link);
+ ata_force_link_limits(link);
link->sata_spd_limit = link->hw_sata_spd_limit;
ata_port_wait_eh(ap);
/* EH is now guaranteed to see UNLOADING - EH context belongs
- * to us. Disable all existing devices.
+ * to us. Restore SControl and disable all existing devices.
*/
- ata_port_for_each_link(link, ap) {
+ __ata_port_for_each_link(link, ap) {
+ sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
ata_link_for_each_dev(dev, link)
ata_dev_disable(dev);
}
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
+ { "nohrst", .lflags = ATA_LFLAG_NO_HRST },
+ { "nosrst", .lflags = ATA_LFLAG_NO_SRST },
+ { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
}
if (ehc->i.serror)
- ata_port_printk(ap, KERN_ERR,
+ ata_link_printk(link, KERN_ERR,
"SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
- int rc, int classify,
- const unsigned int *classes)
+ int rc, const unsigned int *classes)
{
if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
- if (rc == -EAGAIN) {
- if (classify)
- return 1;
- rc = 0;
- }
- if (rc != 0)
- return 0;
+ if (rc == -EAGAIN)
+ return 1;
if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
return 1;
return 0;
*/
while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
max_tries++;
+ if (link->flags & ATA_LFLAG_NO_HRST)
+ hardreset = NULL;
+ if (link->flags & ATA_LFLAG_NO_SRST)
+ softreset = NULL;
now = jiffies;
deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
ehc->i.action &= ~ATA_EH_RESET;
if (hardreset) {
reset = hardreset;
- ehc->i.action = ATA_EH_HARDRESET;
+ ehc->i.action |= ATA_EH_HARDRESET;
} else if (softreset) {
reset = softreset;
- ehc->i.action = ATA_EH_SOFTRESET;
+ ehc->i.action |= ATA_EH_SOFTRESET;
}
if (prereset) {
ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
rc = ata_do_reset(link, reset, classes, deadline);
+ if (rc && rc != -EAGAIN)
+ goto fail;
if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+ ata_eh_followup_srst_needed(link, rc, classes)) {
/* okay, let's do follow-up softreset */
reset = softreset;
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
rc = ata_do_reset(link, reset, classes, deadline);
}
-
- /* -EAGAIN can happen if we skipped followup SRST */
- if (rc && rc != -EAGAIN)
- goto fail;
} else {
if (verbose)
ata_link_printk(link, KERN_INFO, "no reset method "
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
- if (adev->dma_mode)
+ if (ata_dma_enabled(adev))
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
u16 tmp16;
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
- if (adev->dma_mode >= XFER_UDMA_0)
+ if (ata_using_udma(adev))
tmp16 |= (1 << dn);
else
tmp16 &= ~(1 << dn);
struct ata_device *prev = ap->private_data;
/* See if the DMA settings could be wrong */
- if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+ if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
/* Maybe, but do the channels match MWDMA/UDMA ? */
- if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
- (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+ if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+ (ata_using_udma(prev) && !ata_using_udma(adev)))
/* Switch the mode bits */
cs5530_set_dmamode(ap, adev);
}
{
unsigned char id[41];
int mode = 0;
- char *mtype;
+ char *mtype = "";
char mbuf[8];
char *cbl = "(40 wire cable)";
if (adev != ap->private_data) {
oldpiix_set_piomode(ap, adev);
- if (adev->dma_mode)
+ if (ata_dma_enabled(adev))
oldpiix_set_dmamode(ap, adev);
}
return ata_sff_qc_issue(qc);
struct ata_device *prev = ap->private_data;
/* See if the DMA settings could be wrong */
- if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+ if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
/* Maybe, but do the channels match MWDMA/UDMA ? */
- if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
- (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+ if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+ (ata_using_udma(prev) && !ata_using_udma(adev)))
/* Switch the mode bits */
sc1200_set_dmamode(ap, adev);
}
}
/**
- * via_ata_sff_tf_load - send taskfile registers to host controller
+ * via_tf_load - send taskfile registers to host controller
* @ap: Port to which output is sent
* @tf: ATA taskfile register set
*
* Outputs ATA taskfile to standard ATA host controller.
*
* Note: This is to fix the internal bug of via chipsets, which
- * will reset the device register after changing the IEN bit on
- * ctl register
+ * will reset the device register after changing the IEN bit on
+ * ctl register
*/
-static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
- if (tf->ctl != ap->last_ctl) {
- iowrite8(tf->ctl, ioaddr->ctl_addr);
- iowrite8(tf->device, ioaddr->device_addr);
- ap->last_ctl = tf->ctl;
- ata_wait_idle(ap);
- }
-
- if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
- iowrite8(tf->hob_feature, ioaddr->feature_addr);
- iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
- iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
- iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
- iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
- VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
- tf->hob_feature,
- tf->hob_nsect,
- tf->hob_lbal,
- tf->hob_lbam,
- tf->hob_lbah);
- }
+ struct ata_taskfile tmp_tf;
- if (is_addr) {
- iowrite8(tf->feature, ioaddr->feature_addr);
- iowrite8(tf->nsect, ioaddr->nsect_addr);
- iowrite8(tf->lbal, ioaddr->lbal_addr);
- iowrite8(tf->lbam, ioaddr->lbam_addr);
- iowrite8(tf->lbah, ioaddr->lbah_addr);
- VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
- tf->feature,
- tf->nsect,
- tf->lbal,
- tf->lbam,
- tf->lbah);
+ if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+ tmp_tf = *tf;
+ tmp_tf.flags |= ATA_TFLAG_DEVICE;
+ tf = &tmp_tf;
}
-
- if (tf->flags & ATA_TFLAG_DEVICE) {
- iowrite8(tf->device, ioaddr->device_addr);
- VPRINTK("device 0x%X\n", tf->device);
- }
-
- ata_wait_idle(ap);
+ ata_sff_tf_load(ap, tf);
}
static struct scsi_host_template via_sht = {
.set_piomode = via_set_piomode,
.set_dmamode = via_set_dmamode,
.prereset = via_pre_reset,
- .sff_tf_load = via_ata_tf_load,
+ .sff_tf_load = via_tf_load,
};
static struct ata_port_operations via_port_ops_noirq = {
.inherits = &via_port_ops,
.sff_data_xfer = ata_sff_data_xfer_noirq,
- .sff_tf_load = via_ata_tf_load,
};
/**
if (ap->nr_active_links == 0)
return 0;
- if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /*
- * The port is operating in host queuing mode (EDMA).
- * It can accomodate a new qc if the qc protocol
- * is compatible with the current host queue mode.
- */
- if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
- /*
- * The host queue (EDMA) is in NCQ mode.
- * If the new qc is also an NCQ command,
- * then allow the new qc.
- */
- if (qc->tf.protocol == ATA_PROT_NCQ)
- return 0;
- } else {
- /*
- * The host queue (EDMA) is in non-NCQ, DMA mode.
- * If the new qc is also a non-NCQ, DMA command,
- * then allow the new qc.
- */
- if (qc->tf.protocol == ATA_PROT_DMA)
- return 0;
- }
- }
+ /*
+ * The port is operating in host queuing mode (EDMA) with NCQ
+ * enabled, allow multiple NCQ commands. EDMA also allows
+ * queueing multiple DMA commands but libata core currently
+ * doesn't allow it.
+ */
+ if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+ return 0;
+
return ATA_DEFER_PORT;
}
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+ MV_HP_ERRATA_60X1C0;
break;
default:
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/errno.h>
if (!class)
return -EINVAL;
+ if (!class->p) {
+ WARN(1, "%s called for class '%s' before it was initialized",
+ __func__, class->name);
+ return -EINVAL;
+ }
+
mutex_lock(&class->p->class_mutex);
list_for_each_entry(dev, &class->p->class_devices, node) {
if (start) {
if (!class)
return NULL;
+ if (!class->p) {
+ WARN(1, "%s called for class '%s' before it was initialized",
+ __func__, class->name);
+ return NULL;
+ }
mutex_lock(&class->p->class_mutex);
list_for_each_entry(dev, &class->p->class_devices, node) {
* it is attached to. If it is not attached to a bus either, an empty
* string will be returned.
*/
-const char *dev_driver_string(struct device *dev)
+const char *dev_driver_string(const struct device *dev)
{
return dev->driver ? dev->driver->name :
(dev->bus ? dev->bus->name :
spin_lock_init(&dev->devres_lock);
INIT_LIST_HEAD(&dev->devres_head);
device_init_wakeup(dev, 0);
+ device_pm_init(dev);
set_dev_node(dev, -1);
}
{
struct device *parent = NULL;
struct class_interface *class_intf;
- int error;
+ int error = -EINVAL;
dev = get_device(dev);
- if (!dev || !strlen(dev->bus_id)) {
- error = -EINVAL;
- goto Done;
- }
+ if (!dev)
+ goto done;
+
+ /* Temporarily support init_name if it is set.
+ * It will override bus_id for now */
+ if (dev->init_name)
+ dev_set_name(dev, "%s", dev->init_name);
+
+ if (!strlen(dev->bus_id))
+ goto done;
pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
error = bus_add_device(dev);
if (error)
goto BusError;
- error = device_pm_add(dev);
+ error = dpm_sysfs_add(dev);
if (error)
- goto PMError;
+ goto DPMError;
+ device_pm_add(dev);
kobject_uevent(&dev->kobj, KOBJ_ADD);
bus_attach_device(dev);
if (parent)
class_intf->add_dev(dev, class_intf);
mutex_unlock(&dev->class->p->class_mutex);
}
- Done:
+done:
put_device(dev);
return error;
- PMError:
+ DPMError:
bus_remove_device(dev);
BusError:
if (dev->bus)
cleanup_device_parent(dev);
if (parent)
put_device(parent);
- goto Done;
+ goto done;
}
/**
struct class_interface *class_intf;
device_pm_remove(dev);
+ dpm_sysfs_remove(dev);
if (parent)
klist_del(&dev->knode_parent);
if (MAJOR(dev->devt)) {
#include <linux/string.h>
#include "base.h"
-#define to_dev(node) container_of(node, struct device, driver_list)
-
-
static struct device *next_device(struct klist_iter *i)
{
struct klist_node *n = klist_next(i);
* device_pm_add - add a device to the list of active devices
* @dev: Device to be added to the list
*/
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
{
- int error;
-
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
if (dev->parent) {
- if (dev->parent->power.status >= DPM_SUSPENDING) {
- dev_warn(dev, "parent %s is sleeping, will not add\n",
+ if (dev->parent->power.status >= DPM_SUSPENDING)
+ dev_warn(dev, "parent %s should not be sleeping\n",
dev->parent->bus_id);
- WARN_ON(true);
- }
} else if (transition_started) {
/*
* We refuse to register parentless devices while a PM
*/
WARN_ON(true);
}
- error = dpm_sysfs_add(dev);
- if (!error) {
- dev->power.status = DPM_ON;
- list_add_tail(&dev->power.entry, &dpm_list);
- }
+
+ list_add_tail(&dev->power.entry, &dpm_list);
mutex_unlock(&dpm_list_mtx);
- return error;
}
/**
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
mutex_lock(&dpm_list_mtx);
- dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
}
+static inline void device_pm_init(struct device *dev)
+{
+ dev->power.status = DPM_ON;
+}
+
#ifdef CONFIG_PM_SLEEP
/*
return container_of(entry, struct device, power.entry);
}
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
extern void device_pm_remove(struct device *);
#else /* CONFIG_PM_SLEEP */
-static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_add(struct device *dev) {}
static inline void device_pm_remove(struct device *dev) {}
#endif
list_del(&brd->brd_list);
brd_free(brd);
}
+ unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
- unregister_blkdev(RAMDISK_MAJOR, "brd");
return -ENOMEM;
}
BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
- nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
- if (!nbd_dev)
- return -ENOMEM;
-
if (max_part < 0) {
printk(KERN_CRIT "nbd: max_part must be >= 0\n");
return -EINVAL;
}
+ nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+ if (!nbd_dev)
+ return -ENOMEM;
+
part_shift = 0;
if (max_part > 0)
part_shift = fls(max_part);
blk_cleanup_queue(nbd_dev[i].disk->queue);
put_disk(nbd_dev[i].disk);
}
+ kfree(nbd_dev);
return err;
}
}
}
unregister_blkdev(NBD_MAJOR, "nbd");
+ kfree(nbd_dev);
printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
}
depends on BT
config BT_HCIUSB
- tristate "HCI USB driver"
- depends on USB
+ tristate "HCI USB driver (old version)"
+ depends on USB && BT_HCIBTUSB=n
help
Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with
Say Y here to compile support for SCO over HCI USB.
config BT_HCIBTUSB
- tristate "HCI USB driver (alternate version)"
- depends on USB && EXPERIMENTAL && BT_HCIUSB=n
+ tristate "HCI USB driver"
+ depends on USB
help
Bluetooth HCI USB driver.
This driver is required if you want to use Bluetooth devices with
USB interface.
- This driver is still experimental and has no SCO support.
-
Say Y here to compile support for Bluetooth USB devices into the
kernel or say M to compile it as module (btusb).
/* ======================== Module parameters ======================== */
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE("BT3CPCC.bin");
*
* Generic Bluetooth USB driver
*
- * Copyright (C) 2005-2007 Marcel Holtmann <marcel@holtmann.org>
+ * Copyright (C) 2005-2008 Marcel Holtmann <marcel@holtmann.org>
*
*
* This program is free software; you can redistribute it and/or modify
#define BT_DBG(D...)
#endif
-#define VERSION "0.2"
+#define VERSION "0.3"
static int ignore_dga;
static int ignore_csr;
{ } /* Terminating entry */
};
+#define BTUSB_MAX_ISOC_FRAMES 10
+
#define BTUSB_INTR_RUNNING 0
#define BTUSB_BULK_RUNNING 1
+#define BTUSB_ISOC_RUNNING 2
struct btusb_data {
struct hci_dev *hdev;
struct usb_device *udev;
+ struct usb_interface *isoc;
spinlock_t lock;
struct usb_anchor tx_anchor;
struct usb_anchor intr_anchor;
struct usb_anchor bulk_anchor;
+ struct usb_anchor isoc_anchor;
struct usb_endpoint_descriptor *intr_ep;
struct usb_endpoint_descriptor *bulk_tx_ep;
struct usb_endpoint_descriptor *bulk_rx_ep;
+ struct usb_endpoint_descriptor *isoc_tx_ep;
+ struct usb_endpoint_descriptor *isoc_rx_ep;
+
+ int isoc_altsetting;
};
static void btusb_intr_complete(struct urb *urb)
return;
if (urb->status == 0) {
+ hdev->stat.byte_rx += urb->actual_length;
+
if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
urb->transfer_buffer,
urb->actual_length) < 0) {
}
}
-static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
+static int btusb_submit_intr_urb(struct hci_dev *hdev)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
BT_DBG("%s", hdev->name);
+ if (!data->intr_ep)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
return;
if (urb->status == 0) {
+ hdev->stat.byte_rx += urb->actual_length;
+
if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
urb->transfer_buffer,
urb->actual_length) < 0) {
}
}
-static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
+static int btusb_submit_bulk_urb(struct hci_dev *hdev)
{
struct btusb_data *data = hdev->driver_data;
struct urb *urb;
BT_DBG("%s", hdev->name);
+ if (!data->bulk_rx_ep)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb)
return -ENOMEM;
return err;
}
+static void btusb_isoc_complete(struct urb *urb)
+{
+ struct hci_dev *hdev = urb->context;
+ struct btusb_data *data = hdev->driver_data;
+ int i, err;
+
+ BT_DBG("%s urb %p status %d count %d", hdev->name,
+ urb, urb->status, urb->actual_length);
+
+ if (!test_bit(HCI_RUNNING, &hdev->flags))
+ return;
+
+ if (urb->status == 0) {
+ for (i = 0; i < urb->number_of_packets; i++) {
+ unsigned int offset = urb->iso_frame_desc[i].offset;
+ unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+ if (urb->iso_frame_desc[i].status)
+ continue;
+
+ hdev->stat.byte_rx += length;
+
+ if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
+ urb->transfer_buffer + offset,
+ length) < 0) {
+ BT_ERR("%s corrupted SCO packet", hdev->name);
+ hdev->stat.err_rx++;
+ }
+ }
+ }
+
+ if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+ return;
+
+ usb_anchor_urb(urb, &data->isoc_anchor);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0) {
+ BT_ERR("%s urb %p failed to resubmit (%d)",
+ hdev->name, urb, -err);
+ usb_unanchor_urb(urb);
+ }
+}
+
+static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+ int i, offset = 0;
+
+ BT_DBG("len %d mtu %d", len, mtu);
+
+ for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+ i++, offset += mtu, len -= mtu) {
+ urb->iso_frame_desc[i].offset = offset;
+ urb->iso_frame_desc[i].length = mtu;
+ }
+
+ if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+ urb->iso_frame_desc[i].offset = offset;
+ urb->iso_frame_desc[i].length = len;
+ i++;
+ }
+
+ urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev)
+{
+ struct btusb_data *data = hdev->driver_data;
+ struct urb *urb;
+ unsigned char *buf;
+ unsigned int pipe;
+ int err, size;
+
+ BT_DBG("%s", hdev->name);
+
+ if (!data->isoc_rx_ep)
+ return -ENODEV;
+
+ urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+ if (!urb)
+ return -ENOMEM;
+
+ size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+ BTUSB_MAX_ISOC_FRAMES;
+
+ buf = kmalloc(size, GFP_KERNEL);
+ if (!buf) {
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+ urb->dev = data->udev;
+ urb->pipe = pipe;
+ urb->context = hdev;
+ urb->complete = btusb_isoc_complete;
+ urb->interval = data->isoc_rx_ep->bInterval;
+
+ urb->transfer_flags = URB_FREE_BUFFER | URB_ISO_ASAP;
+ urb->transfer_buffer = buf;
+ urb->transfer_buffer_length = size;
+
+ __fill_isoc_descriptor(urb, size,
+ le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+ usb_anchor_urb(urb, &data->isoc_anchor);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0) {
+ BT_ERR("%s urb %p submission failed (%d)",
+ hdev->name, urb, -err);
+ usb_unanchor_urb(urb);
+ kfree(buf);
+ }
+
+ usb_free_urb(urb);
+
+ return err;
+}
+
static void btusb_tx_complete(struct urb *urb)
{
struct sk_buff *skb = urb->context;
if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
return 0;
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->intr_anchor);
+
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
break;
case HCI_ACLDATA_PKT:
+ if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+ return -ENODEV;
+
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb)
return -ENOMEM;
break;
case HCI_SCODATA_PKT:
+ if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
+ return -ENODEV;
+
+ urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
+ if (!urb)
+ return -ENOMEM;
+
+ pipe = usb_sndisocpipe(data->udev,
+ data->isoc_tx_ep->bEndpointAddress);
+
+ urb->dev = data->udev;
+ urb->pipe = pipe;
+ urb->context = skb;
+ urb->complete = btusb_tx_complete;
+ urb->interval = data->isoc_tx_ep->bInterval;
+
+ urb->transfer_flags = URB_ISO_ASAP;
+ urb->transfer_buffer = skb->data;
+ urb->transfer_buffer_length = skb->len;
+
+ __fill_isoc_descriptor(urb, skb->len,
+ le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+
hdev->stat.sco_tx++;
- kfree_skb(skb);
- return 0;
+ break;
default:
return -EILSEQ;
schedule_work(&data->work);
}
+static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+ struct btusb_data *data = hdev->driver_data;
+ struct usb_interface *intf = data->isoc;
+ struct usb_endpoint_descriptor *ep_desc;
+ int i, err;
+
+ if (!data->isoc)
+ return -ENODEV;
+
+ err = usb_set_interface(data->udev, 1, altsetting);
+ if (err < 0) {
+ BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
+ return err;
+ }
+
+ data->isoc_altsetting = altsetting;
+
+ data->isoc_tx_ep = NULL;
+ data->isoc_rx_ep = NULL;
+
+ for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+ ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+ if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+ data->isoc_tx_ep = ep_desc;
+ continue;
+ }
+
+ if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+ data->isoc_rx_ep = ep_desc;
+ continue;
+ }
+ }
+
+ if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+ BT_ERR("%s invalid SCO descriptors", hdev->name);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
static void btusb_work(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
struct hci_dev *hdev = data->hdev;
- if (hdev->conn_hash.acl_num == 0) {
+ if (hdev->conn_hash.acl_num > 0) {
+ if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+ if (btusb_submit_bulk_urb(hdev) < 0)
+ clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+ else
+ btusb_submit_bulk_urb(hdev);
+ }
+ } else {
clear_bit(BTUSB_BULK_RUNNING, &data->flags);
usb_kill_anchored_urbs(&data->bulk_anchor);
- return;
}
- if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
- if (btusb_submit_bulk_urb(hdev) < 0)
- clear_bit(BTUSB_BULK_RUNNING, &data->flags);
- else
- btusb_submit_bulk_urb(hdev);
+ if (hdev->conn_hash.sco_num > 0) {
+ if (data->isoc_altsetting != 2) {
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+
+ if (__set_isoc_interface(hdev, 2) < 0)
+ return;
+ }
+
+ if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+ if (btusb_submit_isoc_urb(hdev) < 0)
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ else
+ btusb_submit_isoc_urb(hdev);
+ }
+ } else {
+ clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+ usb_kill_anchored_urbs(&data->isoc_anchor);
+
+ __set_isoc_interface(hdev, 0);
}
}
init_usb_anchor(&data->tx_anchor);
init_usb_anchor(&data->intr_anchor);
init_usb_anchor(&data->bulk_anchor);
+ init_usb_anchor(&data->isoc_anchor);
hdev = hci_alloc_dev();
if (!hdev) {
hdev->owner = THIS_MODULE;
+ /* interface numbers are hardcoded in the spec */
+ data->isoc = usb_ifnum_to_if(data->udev, 1);
+
if (reset || id->driver_info & BTUSB_RESET)
set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
}
+ if (id->driver_info & BTUSB_BROKEN_ISOC)
+ data->isoc = NULL;
+
if (id->driver_info & BTUSB_SNIFFER) {
- struct usb_device *udev = interface_to_usbdev(intf);
+ struct usb_device *udev = data->udev;
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+ data->isoc = NULL;
}
if (id->driver_info & BTUSB_BCM92035) {
}
}
+ if (data->isoc) {
+ err = usb_driver_claim_interface(&btusb_driver,
+ data->isoc, NULL);
+ if (err < 0) {
+ hci_free_dev(hdev);
+ kfree(data);
+ return err;
+ }
+ }
+
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);
hdev = data->hdev;
+ if (data->isoc)
+ usb_driver_release_interface(&btusb_driver, data->isoc);
+
usb_set_intfdata(intf, NULL);
hci_unregister_dev(hdev);
module_param(reset, bool, 0644);
MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
#endif
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(minor, int, 0444);
MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
ENSURE(get_last_session, CDC_MULTI_SESSION);
ENSURE(get_mcn, CDC_MCN);
ENSURE(reset, CDC_RESET);
- ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
ENSURE(generic_packet, CDC_GENERIC_PACKET);
cdi->mc_flags = 0;
cdo->n_minors = 0;
/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&q, argp, sizeof(q)))
return -EFAULT;
/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&header, argp, sizeof(header)))
return -EFAULT;
/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
- if (!CDROM_CAN(CDC_PLAY_AUDIO))
- return -ENOSYS;
if (copy_from_user(&entry, argp, sizeof(entry)))
return -EFAULT;
return err;
}
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+ void *arg)
+{
+ return -EINVAL;
+}
+
static struct cdrom_device_ops gdrom_ops = {
.open = gdrom_open,
.release = gdrom_release,
.media_changed = gdrom_mediachanged,
.get_last_session = gdrom_get_last_session,
.reset = gdrom_hardreset,
+ .audio_ioctl = gdrom_audio_ioctl,
.capability = CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
.n_minors = 1,
}
}
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+ void *arg)
+{
+ return -EINVAL;
+}
+
static struct cdrom_device_ops viocd_dops = {
.open = viocd_open,
.release = viocd_release,
.media_changed = viocd_media_changed,
.lock_door = viocd_lock_door,
.generic_packet = viocd_packet,
+ .audio_ioctl = viocd_audio_ioctl,
.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
};
for (i = 0; ; i++) {
if (!ipmi_defaults[i].port)
break;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return;
-
#ifdef CONFIG_PPC_MERGE
if (check_legacy_ioport(ipmi_defaults[i].port))
continue;
#endif
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
info->addr_source = NULL;
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/uaccess.h>
-#include <linux/version.h>
#include "tty.h"
#include "network.h"
return half_md4_transform(hash, keyptr->secret);
}
+EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
}
/**
- * tiocswinsz - implement window size set ioctl
- * @tty; tty
- * @arg: user buffer for result
+ * tty_do_resize - resize event
+ * @tty: tty being resized
+ * @real_tty: real tty (if using a pty/tty pair)
+ * @rows: rows (character)
+ * @cols: cols (character)
*
- * Copies the user idea of the window size to the kernel. Traditionally
- * this is just advisory information but for the Linux console it
- * actually has driver level meaning and triggers a VC resize.
- *
- * Locking:
- * Called function use the console_sem is used to ensure we do
- * not try and resize the console twice at once.
- * The tty->termios_mutex is used to ensure we don't double
- * resize and get confused. Lock order - tty->termios_mutex before
- * console sem
+ * Update the termios variables and send the neccessary signals to
+ * peform a terminal resize correctly
*/
-static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
- struct winsize __user *arg)
+int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws)
{
- struct winsize tmp_ws;
struct pid *pgrp, *rpgrp;
unsigned long flags;
- if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
- return -EFAULT;
-
mutex_lock(&tty->termios_mutex);
- if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
+ if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
-
-#ifdef CONFIG_VT
- if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) {
- if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col,
- tmp_ws.ws_row)) {
- mutex_unlock(&tty->termios_mutex);
- return -ENXIO;
- }
- }
-#endif
/* Get the PID values and reference them so we can
avoid holding the tty ctrl lock while sending signals */
spin_lock_irqsave(&tty->ctrl_lock, flags);
put_pid(pgrp);
put_pid(rpgrp);
- tty->winsize = tmp_ws;
- real_tty->winsize = tmp_ws;
+ tty->winsize = *ws;
+ real_tty->winsize = *ws;
done:
mutex_unlock(&tty->termios_mutex);
return 0;
}
+/**
+ * tiocswinsz - implement window size set ioctl
+ * @tty; tty
+ * @arg: user buffer for result
+ *
+ * Copies the user idea of the window size to the kernel. Traditionally
+ * this is just advisory information but for the Linux console it
+ * actually has driver level meaning and triggers a VC resize.
+ *
+ * Locking:
+ * Driver dependant. The default do_resize method takes the
+ * tty termios mutex and ctrl_lock. The console takes its own lock
+ * then calls into the default method.
+ */
+
+static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize __user *arg)
+{
+ struct winsize tmp_ws;
+ if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
+ return -EFAULT;
+
+ if (tty->ops->resize)
+ return tty->ops->resize(tty, real_tty, &tmp_ws);
+ else
+ return tty_do_resize(tty, real_tty, &tmp_ws);
+}
+
/**
* tioccons - allow admin to move logical console
* @file: the file to become console
*/
#define VC_RESIZE_MAXCOL (32767)
#define VC_RESIZE_MAXROW (32767)
-int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+
+/**
+ * vc_do_resize - resizing method for the tty
+ * @tty: tty being resized
+ * @real_tty: real tty (different to tty if a pty/tty pair)
+ * @vc: virtual console private data
+ * @cols: columns
+ * @lines: lines
+ *
+ * Resize a virtual console, clipping according to the actual constraints.
+ * If the caller passes a tty structure then update the termios winsize
+ * information and perform any neccessary signal handling.
+ *
+ * Caller must hold the console semaphore. Takes the termios mutex and
+ * ctrl_lock of the tty IFF a tty is passed.
+ */
+
+static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct vc_data *vc, unsigned int cols, unsigned int lines)
{
unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0;
unsigned int old_cols, old_rows, old_row_size, old_screen_size;
gotoxy(vc, vc->vc_x, vc->vc_y);
save_cur(vc);
- if (vc->vc_tty) {
- struct winsize ws, *cws = &vc->vc_tty->winsize;
- struct pid *pgrp = NULL;
-
+ if (tty) {
+ /* Rewrite the requested winsize data with the actual
+ resulting sizes */
+ struct winsize ws;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
ws.ws_col = vc->vc_cols;
ws.ws_ypixel = vc->vc_scan_lines;
-
- spin_lock_irq(&vc->vc_tty->ctrl_lock);
- if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
- pgrp = get_pid(vc->vc_tty->pgrp);
- spin_unlock_irq(&vc->vc_tty->ctrl_lock);
- if (pgrp) {
- kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
- put_pid(pgrp);
- }
- *cws = ws;
+ tty_do_resize(tty, real_tty, &ws);
}
if (CON_IS_VISIBLE(vc))
return err;
}
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines)
+/**
+ * vc_resize - resize a VT
+ * @vc: virtual console
+ * @cols: columns
+ * @rows: rows
+ *
+ * Resize a virtual console as seen from the console end of things. We
+ * use the common vc_do_resize methods to update the structures. The
+ * caller must hold the console sem to protect console internals and
+ * vc->vc_tty
+ */
+
+int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows)
+{
+ return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows);
+}
+
+/**
+ * vt_resize - resize a VT
+ * @tty: tty to resize
+ * @real_tty: tty if a pty/tty pair
+ * @ws: winsize attributes
+ *
+ * Resize a virtual terminal. This is called by the tty layer as we
+ * register our own handler for resizing. The mutual helper does all
+ * the actual work.
+ *
+ * Takes the console sem and the called methods then take the tty
+ * termios_mutex and the tty ctrl_lock in that order.
+ */
+
+int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws)
{
- int rc;
+ struct vc_data *vc = tty->driver_data;
+ int ret;
acquire_console_sem();
- rc = vc_resize(vc, cols, lines);
+ ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row);
release_console_sem();
- return rc;
+ return ret;
}
void vc_deallocate(unsigned int currcons)
.start = con_start,
.throttle = con_throttle,
.unthrottle = con_unthrottle,
+ .resize = vt_resize,
};
int __init vty_init(void)
EXPORT_SYMBOL(update_region);
EXPORT_SYMBOL(redraw_screen);
EXPORT_SYMBOL(vc_resize);
-EXPORT_SYMBOL(vc_lock_resize);
EXPORT_SYMBOL(fg_console);
EXPORT_SYMBOL(console_blank_hook);
EXPORT_SYMBOL(console_blanked);
get_user(cc, &vtsizes->v_cols))
ret = -EFAULT;
else {
+ acquire_console_sem();
for (i = 0; i < MAX_NR_CONSOLES; i++) {
vc = vc_cons[i].d;
if (vc) {
vc->vc_resize_user = 1;
- vc_lock_resize(vc_cons[i].d, cc, ll);
+ vc_resize(vc_cons[i].d, cc, ll);
}
}
+ release_console_sem();
}
break;
}
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
* currently programmed in the FPGA.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/types.h>
#include <linux/cdev.h>
-#include <linux/version.h>
#include <linux/platform_device.h>
#include <asm/io.h>
struct ladder_device *ldev = &__get_cpu_var(ladder_devices);
struct ladder_device_state *last_state;
int last_residency, last_idx = ldev->last_state_idx;
+ int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
if (unlikely(!ldev))
return 0;
+ /* Special case when user has set very strict latency requirement */
+ if (unlikely(latency_req == 0)) {
+ ladder_do_selection(ldev, last_idx, 0);
+ return 0;
+ }
+
last_state = &ldev->states[last_idx];
if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID)
/* consider promotion */
if (last_idx < dev->state_count - 1 &&
last_residency > last_state->threshold.promotion_time &&
- dev->states[last_idx + 1].exit_latency <=
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) {
+ dev->states[last_idx + 1].exit_latency <= latency_req) {
last_state->stats.promotion_count++;
last_state->stats.demotion_count = 0;
if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) {
}
/* consider demotion */
- if (last_idx > 0 &&
+ if (last_idx > CPUIDLE_DRIVER_STATE_START &&
+ dev->states[last_idx].exit_latency > latency_req) {
+ int i;
+
+ for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) {
+ if (dev->states[i].exit_latency <= latency_req)
+ break;
+ }
+ ladder_do_selection(ldev, last_idx, i);
+ return i;
+ }
+
+ if (last_idx > CPUIDLE_DRIVER_STATE_START &&
last_residency < last_state->threshold.demotion_time) {
last_state->stats.demotion_count++;
last_state->stats.promotion_count = 0;
struct ladder_device_state *lstate;
struct cpuidle_state *state;
- ldev->last_state_idx = 0;
+ ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START;
for (i = 0; i < dev->state_count; i++) {
state = &dev->states[i];
static int menu_select(struct cpuidle_device *dev)
{
struct menu_device *data = &__get_cpu_var(menu_devices);
+ int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY);
int i;
+ /* Special case when user has set very strict latency requirement */
+ if (unlikely(latency_req == 0)) {
+ data->last_state_idx = 0;
+ return 0;
+ }
+
/* determine the expected residency time */
data->expected_us =
(u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000;
/* find the deepest idle state that satisfies our constraints */
- for (i = 1; i < dev->state_count; i++) {
+ for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) {
struct cpuidle_state *s = &dev->states[i];
if (s->target_residency > data->expected_us)
break;
if (s->target_residency > data->predicted_us)
break;
- if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY))
+ if (s->exit_latency > latency_req)
break;
}
{
struct menu_device *data = &__get_cpu_var(menu_devices);
int last_idx = data->last_state_idx;
- unsigned int measured_us =
- cpuidle_get_last_residency(dev) + data->elapsed_us;
+ unsigned int last_idle_us = cpuidle_get_last_residency(dev);
struct cpuidle_state *target = &dev->states[last_idx];
+ unsigned int measured_us;
/*
* Ugh, this idle state doesn't support residency measurements, so we
* for one full standard timer tick. However, be aware that this
* could potentially result in a suboptimal state transition.
*/
- if (!(target->flags & CPUIDLE_FLAG_TIME_VALID))
- measured_us = USEC_PER_SEC / HZ;
+ if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID)))
+ last_idle_us = USEC_PER_SEC / HZ;
+
+ /*
+ * measured_us and elapsed_us are the cumulative idle time, since the
+ * last time we were woken out of idle by an interrupt.
+ */
+ if (data->elapsed_us <= data->elapsed_us + last_idle_us)
+ measured_us = data->elapsed_us + last_idle_us;
+ else
+ measured_us = -1;
+
+ /* Predict time until next break event */
+ data->predicted_us = max(measured_us, data->last_measured_us);
- /* Predict time remaining until next break event */
- if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) {
- data->predicted_us = max(measured_us, data->last_measured_us);
+ if (last_idle_us + BREAK_FUZZ <
+ data->expected_us - target->exit_latency) {
data->last_measured_us = measured_us;
data->elapsed_us = 0;
} else {
- if (data->elapsed_us < data->elapsed_us + measured_us)
- data->elapsed_us = measured_us;
- else
- data->elapsed_us = -1;
- data->predicted_us = max(measured_us, data->last_measured_us);
+ data->elapsed_us = measured_us;
}
}
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/memory.h>
-#include <asm/plat-orion/mv_xor.h>
+#include <plat/mv_xor.h>
#include "mv_xor.h"
static void mv_xor_issue_pending(struct dma_chan *chan);
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/workqueue.h>
-#include <linux/version.h>
#define EDAC_MC_LABEL_LEN 31
#define EDAC_DEVICE_NAME_LEN 31
This is the "Juju" FireWire stack, a new alternative implementation
designed for robustness and simplicity. You can build either this
stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
- Please read http://wiki.linux1394.org/JujuMigration before you
- enable the new stack.
+ Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+ before you enable the new stack.
To compile this driver as a module, say M here: the module will be
called firewire-core.
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
This driver can also be built as a module. If so, the module
will be called ad7418.
+config SENSORS_ADCXX
+ tristate "National Semiconductor ADCxxxSxxx"
+ depends on SPI_MASTER && EXPERIMENTAL
+ help
+ If you say yes here you get support for the National Semiconductor
+ ADC<bb><c>S<sss> chip family, where
+ * bb is the resolution in number of bits (8, 10, 12)
+ * c is the number of channels (1, 2, 4, 8)
+ * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
+ kSPS and 101 for 1 MSPS)
+
+ Examples : ADC081S101, ADC124S501, ...
+
+ This driver can also be built as a module. If so, the module
+ will be called adcxx.
+
config SENSORS_ADM1021
tristate "Analog Devices ADM1021 and compatibles"
depends on I2C
obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o
obj-$(CONFIG_SENSORS_AD7414) += ad7414.o
obj-$(CONFIG_SENSORS_AD7418) += ad7418.o
+obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
/*
- abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl>
+ abituguru3.c
+
+ Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
struct abituguru3_motherboard_info {
u16 id;
- const char *name;
+ const char *dmi_name;
/* + 1 -> end of sensors indicated by a sensor with name == NULL */
struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1];
};
/* Constants */
static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
- { 0x000C, "unknown", {
+ { 0x000C, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX1 Fan", 35, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000D, "Abit AW8", {
+ { 0x000D, NULL /* Abit AW8, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000E, "AL-8", {
+ { 0x000E, NULL /* AL-8, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x000F, "unknown", {
+ { 0x000F, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0010, "Abit NI8 SLI GR", {
+ { 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "OTES1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0011, "Abit AT8 32X", {
+ { 0x0011, NULL /* Abit AT8 32X, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX2 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0012, "Abit AN8 32X", {
+ { 0x0012, NULL /* Abit AN8 32X, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX1 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0013, "Abit AW8D", {
+ { 0x0013, NULL /* Abit AW8D, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX5 Fan", 39, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0014, "Abit AB9 Pro", {
+ { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 10, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "SYS Fan", 34, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0015, "unknown", {
+ { 0x0015, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR", 1, 0, 20, 1, 0 },
{ "DDR VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0016, "AW9D-MAX", {
+ { 0x0016, NULL /* AW9D-MAX, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "OTES1 Fan", 38, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0017, "unknown", {
+ { 0x0017, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 FAN", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0018, "unknown", {
+ { 0x0018, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x0019, "unknown", {
+ { 0x0019, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 7, 0, 10, 1, 0 },
{ "DDR2", 13, 0, 20, 1, 0 },
{ "DDR2 VTT", 14, 0, 10, 1, 0 },
{ "AUX3 FAN", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001A, "Abit IP35 Pro", {
+ { 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
{ "AUX4 Fan", 37, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001B, "unknown", {
+ { 0x001B, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR3", 1, 0, 20, 1, 0 },
{ "DDR3 VTT", 2, 0, 10, 1, 0 },
{ "AUX3 Fan", 36, 2, 60, 1, 0 },
{ NULL, 0, 0, 0, 0, 0 } }
},
- { 0x001C, "unknown", {
+ { 0x001C, NULL /* Unknown, need DMI string */, {
{ "CPU Core", 0, 0, 10, 1, 0 },
{ "DDR2", 1, 0, 20, 1, 0 },
{ "DDR2 VTT", 2, 0, 10, 1, 0 },
goto abituguru3_probe_error;
}
data->sensors = abituguru3_motherboards[i].sensors;
+
printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard "
- "ID: %04X (%s)\n", (unsigned int)id,
- abituguru3_motherboards[i].name);
+ "ID: %04X\n", (unsigned int)id);
+
+#ifdef CONFIG_DMI
+ if (!abituguru3_motherboards[i].dmi_name) {
+ printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
+ "not detected using DMI. Please send the output of "
+ "\"dmidecode\" to the abituguru3 maintainer"
+ "(see MAINTAINERS)\n");
+ }
+#endif
/* Fill the sysfs attr array */
sysfs_attr_i = 0;
.resume = abituguru3_resume
};
+#ifdef CONFIG_DMI
+
+static int __init abituguru3_dmi_detect(void)
+{
+ const char *board_vendor, *board_name;
+ int i, err = (force) ? 1 : -ENODEV;
+
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
+ return err;
+
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+ if (!board_name)
+ return err;
+
+ for (i = 0; abituguru3_motherboards[i].id; i++) {
+ const char *dmi_name = abituguru3_motherboards[i].dmi_name;
+ if (dmi_name && !strcmp(dmi_name, board_name))
+ break;
+ }
+
+ if (!abituguru3_motherboards[i].id)
+ return 1;
+
+ return 0;
+}
+
+#else /* !CONFIG_DMI */
+
+static inline int abituguru3_dmi_detect(void)
+{
+ return -ENODEV;
+}
+
+#endif /* CONFIG_DMI */
+
+/* FIXME: Manual detection should die eventually; we need to collect stable
+ * DMI model names first before we can rely entirely on CONFIG_DMI.
+ */
+
static int __init abituguru3_detect(void)
{
/* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or
if (((data_val == 0x00) || (data_val == 0x08)) &&
((cmd_val == 0xAC) || (cmd_val == 0x05) ||
(cmd_val == 0x55)))
- return ABIT_UGURU3_BASE;
+ return 0;
ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = "
"0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val);
if (force) {
printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is "
"present because of \"force\" parameter\n");
- return ABIT_UGURU3_BASE;
+ return 0;
}
/* No uGuru3 found */
static int __init abituguru3_init(void)
{
- int address, err;
struct resource res = { .flags = IORESOURCE_IO };
-
-#ifdef CONFIG_DMI
- const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
-
- /* safety check, refuse to load on non Abit motherboards */
- if (!force && (!board_vendor ||
- strcmp(board_vendor, "http://www.abit.com.tw/")))
- return -ENODEV;
-#endif
-
- address = abituguru3_detect();
- if (address < 0)
- return address;
+ int err;
+
+ /* Attempt DMI detection first */
+ err = abituguru3_dmi_detect();
+ if (err < 0)
+ return err;
+
+ /* Fall back to manual detection if there was no exact
+ * board name match, or force was specified.
+ */
+ if (err > 0) {
+ err = abituguru3_detect();
+ if (err)
+ return err;
+ }
err = platform_driver_register(&abituguru3_driver);
if (err)
goto exit;
- abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address);
+ abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME,
+ ABIT_UGURU3_BASE);
if (!abituguru3_pdev) {
printk(KERN_ERR ABIT_UGURU3_NAME
": Device allocation failed\n");
goto exit_driver_unregister;
}
- res.start = address;
- res.end = address + ABIT_UGURU3_REGION_LENGTH - 1;
+ res.start = ABIT_UGURU3_BASE;
+ res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1;
res.name = ABIT_UGURU3_NAME;
err = platform_device_add_resources(abituguru3_pdev, &res, 1);
--- /dev/null
+/*
+ * adcxx.c
+ *
+ * The adcxx4s is an AD converter family from National Semiconductor (NS).
+ *
+ * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch>
+ *
+ * The adcxx4s communicates with a host processor via an SPI/Microwire Bus
+ * interface. This driver supports the whole family of devices with name
+ * ADC<bb><c>S<sss>, where
+ * * bb is the resolution in number of bits (8, 10, 12)
+ * * c is the number of channels (1, 2, 4, 8)
+ * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS
+ * and 101 for 1 MSPS)
+ *
+ * Complete datasheets are available at National's website here:
+ * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf
+ *
+ * Handling of 8, 10 and 12 bits converters are the same, the
+ * unavailable bits are 0 :)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+
+#define DRVNAME "adcxx"
+
+struct adcxx {
+ struct device *hwmon_dev;
+ struct mutex lock;
+ u32 channels;
+ u32 reference; /* in millivolts */
+};
+
+/* sysfs hook function */
+static ssize_t adcxx_read(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */
+ u8 rx_buf[2];
+ int status;
+ int value;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf),
+ rx_buf, sizeof(rx_buf));
+ if (status < 0) {
+ dev_warn(dev, "spi_write_then_read failed with status %d\n",
+ status);
+ goto out;
+ }
+
+ value = (rx_buf[0] << 8) + rx_buf[1];
+ dev_dbg(dev, "raw value = 0x%x\n", value);
+
+ value = value * adc->reference >> 12;
+ status = sprintf(buf, "%d\n", value);
+out:
+ mutex_unlock(&adc->lock);
+ return status;
+}
+
+static ssize_t adcxx_show_min(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ /* The minimum reference is 0 for this chip family */
+ return sprintf(buf, "0\n");
+}
+
+static ssize_t adcxx_show_max(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ u32 reference;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ reference = adc->reference;
+
+ mutex_unlock(&adc->lock);
+
+ return sprintf(buf, "%d\n", reference);
+}
+
+static ssize_t adcxx_set_max(struct device *dev,
+ struct device_attribute *devattr, const char *buf, size_t count)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ unsigned long value;
+
+ if (strict_strtoul(buf, 10, &value))
+ return -EINVAL;
+
+ if (mutex_lock_interruptible(&adc->lock))
+ return -ERESTARTSYS;
+
+ adc->reference = value;
+
+ mutex_unlock(&adc->lock);
+
+ return count;
+}
+
+static ssize_t adcxx_show_name(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+
+ return sprintf(buf, "adcxx%ds\n", adc->channels);
+}
+
+static struct sensor_device_attribute ad_input[] = {
+ SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0),
+ SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0),
+ SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max,
+ adcxx_set_max, 0),
+ SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0),
+ SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1),
+ SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2),
+ SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3),
+ SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4),
+ SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5),
+ SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6),
+ SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7),
+};
+
+/*----------------------------------------------------------------------*/
+
+static int __devinit adcxx_probe(struct spi_device *spi, int channels)
+{
+ struct adcxx *adc;
+ int status;
+ int i;
+
+ adc = kzalloc(sizeof *adc, GFP_KERNEL);
+ if (!adc)
+ return -ENOMEM;
+
+ /* set a default value for the reference */
+ adc->reference = 3300;
+ adc->channels = channels;
+ mutex_init(&adc->lock);
+
+ mutex_lock(&adc->lock);
+
+ dev_set_drvdata(&spi->dev, adc);
+
+ for (i = 0; i < 3 + adc->channels; i++) {
+ status = device_create_file(&spi->dev, &ad_input[i].dev_attr);
+ if (status) {
+ dev_err(&spi->dev, "device_create_file failed.\n");
+ goto out_err;
+ }
+ }
+
+ adc->hwmon_dev = hwmon_device_register(&spi->dev);
+ if (IS_ERR(adc->hwmon_dev)) {
+ dev_err(&spi->dev, "hwmon_device_register failed.\n");
+ status = PTR_ERR(adc->hwmon_dev);
+ goto out_err;
+ }
+
+ mutex_unlock(&adc->lock);
+ return 0;
+
+out_err:
+ for (i--; i >= 0; i--)
+ device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_unlock(&adc->lock);
+ kfree(adc);
+ return status;
+}
+
+static int __devinit adcxx1s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 1);
+}
+
+static int __devinit adcxx2s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 2);
+}
+
+static int __devinit adcxx4s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 4);
+}
+
+static int __devinit adcxx8s_probe(struct spi_device *spi)
+{
+ return adcxx_probe(spi, 8);
+}
+
+static int __devexit adcxx_remove(struct spi_device *spi)
+{
+ struct adcxx *adc = dev_get_drvdata(&spi->dev);
+ int i;
+
+ mutex_lock(&adc->lock);
+ hwmon_device_unregister(adc->hwmon_dev);
+ for (i = 0; i < 3 + adc->channels; i++)
+ device_remove_file(&spi->dev, &ad_input[i].dev_attr);
+
+ dev_set_drvdata(&spi->dev, NULL);
+ mutex_unlock(&adc->lock);
+ kfree(adc);
+
+ return 0;
+}
+
+static struct spi_driver adcxx1s_driver = {
+ .driver = {
+ .name = "adcxx1s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx1s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx2s_driver = {
+ .driver = {
+ .name = "adcxx2s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx2s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx4s_driver = {
+ .driver = {
+ .name = "adcxx4s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx4s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static struct spi_driver adcxx8s_driver = {
+ .driver = {
+ .name = "adcxx8s",
+ .owner = THIS_MODULE,
+ },
+ .probe = adcxx8s_probe,
+ .remove = __devexit_p(adcxx_remove),
+};
+
+static int __init init_adcxx(void)
+{
+ int status;
+ status = spi_register_driver(&adcxx1s_driver);
+ if (status)
+ goto reg_1_failed;
+
+ status = spi_register_driver(&adcxx2s_driver);
+ if (status)
+ goto reg_2_failed;
+
+ status = spi_register_driver(&adcxx4s_driver);
+ if (status)
+ goto reg_4_failed;
+
+ status = spi_register_driver(&adcxx8s_driver);
+ if (status)
+ goto reg_8_failed;
+
+ return status;
+
+reg_8_failed:
+ spi_unregister_driver(&adcxx4s_driver);
+reg_4_failed:
+ spi_unregister_driver(&adcxx2s_driver);
+reg_2_failed:
+ spi_unregister_driver(&adcxx1s_driver);
+reg_1_failed:
+ return status;
+}
+
+static void __exit exit_adcxx(void)
+{
+ spi_unregister_driver(&adcxx1s_driver);
+ spi_unregister_driver(&adcxx2s_driver);
+ spi_unregister_driver(&adcxx4s_driver);
+ spi_unregister_driver(&adcxx8s_driver);
+}
+
+module_init(init_adcxx);
+module_exit(exit_adcxx);
+
+MODULE_AUTHOR("Marc Pignat");
+MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("adcxx1s");
+MODULE_ALIAS("adcxx2s");
+MODULE_ALIAS("adcxx4s");
+MODULE_ALIAS("adcxx8s");
"TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S",
"TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P",
"TM9S", "TN0H", "TS0C", NULL },
+/* Set 5: iMac */
+ { "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P",
+ "Tp0C", NULL },
+/* Set 6: Macbook3 set */
+ { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H",
+ "Th0S", "Th1H", NULL },
};
/* List of keys used to read/write fan speeds */
{ .accelerometer = 0, .light = 0, .temperature_set = 3 },
/* MacPro: temperature set 4 */
{ .accelerometer = 0, .light = 0, .temperature_set = 4 },
+/* iMac: temperature set 5 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 5 },
+/* MacBook3: accelerometer and temperature set 6 */
+ { .accelerometer = 1, .light = 0, .temperature_set = 6 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
(void*)&applesmc_dmi_data[0]},
- { applesmc_dmi_match, "Apple MacBook", {
+ { applesmc_dmi_match, "Apple MacBook (v2)", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") },
(void*)&applesmc_dmi_data[1]},
+ { applesmc_dmi_match, "Apple MacBook (v3)", {
+ DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") },
+ (void*)&applesmc_dmi_data[6]},
{ applesmc_dmi_match, "Apple MacBook", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") },
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") },
(void*)&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple iMac", {
+ DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"iMac") },
+ (void*)&applesmc_dmi_data[5]},
{ .ident = NULL }
};
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &cpu_data(i);
- /* check if family 6, models 0xe, 0xf, 0x16, 0x17 */
+ /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
!((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
- (c->x86_model == 0x16) || (c->x86_model == 0x17))) {
+ (c->x86_model == 0x16) || (c->x86_model == 0x17) ||
+ (c->x86_model == 0x1A))) {
/* supported CPU not found, but report the unknown
family 6 CPU */
* For VRD 10.0 and up, "VRD x.y Design Guide",
* available at http://developer.intel.com/.
*
- * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559,
+ * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF
+ * Table 74. VID Code Voltages
+ * This corresponds to an arbitrary VRM code of 24 in the functions below.
+ * These CPU models (K8 revision <= E) have 5 VID pins. See also:
+ * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf
+ *
+ * AMD NPT Family 0Fh Processors, AMD Publication 32559,
* http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf
* Table 71. VID Code Voltages
- * AMD Opteron processors don't follow the Intel specifications.
- * I'm going to "make up" 2.4 as the spec number for the Opterons.
- * No good reason just a mnemonic for the 24x Opteron processor
- * series.
+ * This corresponds to an arbitrary VRM code of 25 in the functions below.
+ * These CPU models (K8 revision >= F) have 6 VID pins. See also:
+ * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610,
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf
*
* The 17 specification is in fact Intel Mobile Voltage Positioning -
* (IMVP-II). You can find more information in the datasheet of Max1718
return 0;
return((1600000 - (val - 2) * 6250 + 500) / 1000);
- case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */
+ case 24: /* Athlon64 & Opteron */
+ val &= 0x1f;
+ if (val == 0x1f)
+ return 0;
+ /* fall through */
+ case 25: /* AMD NPT 0Fh */
val &= 0x3f;
return (val < 32) ? 1550 - 25 * val
: 775 - (25 * (val - 31)) / 2;
#ifdef CONFIG_X86
-/* the stepping parameter is highest acceptable stepping for current line */
+/*
+ * The stepping parameter is highest acceptable stepping for current line.
+ * The model match must be exact for 4-bit values. For model values 0x10
+ * and above (extended model), all models below the parameter will match.
+ */
static struct vrm_model vrm_models[] = {
{X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */
- {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */
+ {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */
+ {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* NPT family 0Fh */
{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */
{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */
{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */
if (vrm_models[i].vendor==vendor)
if ((vrm_models[i].eff_family==eff_family)
&& ((vrm_models[i].eff_model==eff_model) ||
+ (vrm_models[i].eff_model >= 0x10 &&
+ eff_model <= vrm_models[i].eff_model) ||
(vrm_models[i].eff_model==ANY)) &&
(eff_stepping <= vrm_models[i].eff_stepping))
return vrm_models[i].vrm_type;
#define MAX_AMBS_PER_CHANNEL 16
#define MAX_AMBS (MAX_MEM_CHANNELS * \
MAX_AMBS_PER_CHANNEL)
+#define CHANNEL_SHIFT 4
+#define DIMM_MASK 0xF
/*
* Ugly hack: For some reason the highest bit is set if there
* are _any_ DIMMs in the channel. Attempting to read from
* might prevent us from seeing the 16th DIMM in the channel.
*/
#define REAL_MAX_AMBS_PER_CHANNEL 15
-#define KNOBS_PER_AMB 5
+#define KNOBS_PER_AMB 6
static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit)
{
500 * amb_read_byte(data, amb_reg_temp(attr->index)));
}
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT,
+ attr->index & DIMM_MASK);
+}
+
static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev)
{
int i, j, k, d = 0;
continue;
d++;
+ /* sysfs label */
+ iattr = data->attrs + data->num_attrs;
+ snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
+ "temp%d_label", d);
+ iattr->s_attr.dev_attr.attr.name = iattr->name;
+ iattr->s_attr.dev_attr.attr.mode = S_IRUGO;
+ iattr->s_attr.dev_attr.show = show_label;
+ iattr->s_attr.index = k;
+ res = device_create_file(&pdev->dev,
+ &iattr->s_attr.dev_attr);
+ if (res)
+ goto exit_remove;
+ data->num_attrs++;
+
/* Temperature sysfs knob */
iattr = data->attrs + data->num_attrs;
snprintf(iattr->name, AMB_SYSFS_NAME_LEN,
/*
- * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
- * and capping functionality.
+ * A hwmon driver for the IBM System Director Active Energy Manager (AEM)
+ * temperature/power/energy sensors and capping functionality.
* Copyright (C) 2008 IBM
*
* Author: Darrick J. Wong <djwong@us.ibm.com>
}
/* Update AEM energy registers */
+static void update_aem_energy_one(struct aem_data *data, int which)
+{
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, which,
+ &data->energy[which], 8);
+}
+
static void update_aem_energy(struct aem_data *data)
{
- aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+ update_aem_energy_one(data, 0);
if (data->ver_major < 2)
return;
- aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+ update_aem_energy_one(data, 1);
}
/* Update all AEM1 sensors */
return -ETIMEDOUT;
if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
- memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+ memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) ||
+ fi_resp->num_instances <= instance_num)
return -ENOENT;
return 0;
struct timespec b, a;
mutex_lock(&data->lock);
- update_aem_energy(data);
+ update_aem_energy_one(data, attr->index);
getnstimeofday(&b);
before = data->energy[attr->index];
return 0;
}
- update_aem_energy(data);
+ update_aem_energy_one(data, attr->index);
getnstimeofday(&a);
after = data->energy[attr->index];
mutex_unlock(&data->lock);
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct aem_data *a = dev_get_drvdata(dev);
- a->update(a);
+ mutex_lock(&a->lock);
+ update_aem_energy_one(a, attr->index);
+ mutex_unlock(&a->lock);
return sprintf(buf, "%llu\n",
(unsigned long long)a->energy[attr->index] * 1000);
}
MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
-MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver");
MODULE_LICENSE("GPL");
module_init(aem_init);
{
struct w83791d_data *data;
struct device *dev = &client->dev;
- int i, val1, err;
+ int i, err;
#ifdef DEBUG
+ int val1;
val1 = w83791d_read(client, W83791D_REG_DID_VID4);
dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
*/
static void msf_from_bcd(struct atapi_msf *msf)
{
- msf->minute = BCD2BIN(msf->minute);
- msf->second = BCD2BIN(msf->second);
- msf->frame = BCD2BIN(msf->frame);
+ msf->minute = bcd2bin(msf->minute);
+ msf->second = bcd2bin(msf->second);
+ msf->frame = bcd2bin(msf->frame);
}
int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
return stat;
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
- toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
+ toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+ toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
}
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
return stat;
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
- toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+ toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+ toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
} else {
toc->hdr.first_track = CDROM_LEADOUT;
toc->hdr.last_track = CDROM_LEADOUT;
toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
- toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
- toc->hdr.last_track = BCD2BIN(toc->hdr.last_track);
+ toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+ toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
}
for (i = 0; i <= ntracks; i++) {
if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
- toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+ toc->ent[i].track = bcd2bin(toc->ent[i].track);
msf_from_bcd(&toc->ent[i].addr.msf);
}
toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
.name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
- .remove = aec62xx_remove,
+ .remove = __devexit_p(aec62xx_remove),
};
static int __init aec62xx_ide_init(void)
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
- .remove = cy82c693_remove,
+ .remove = __devexit_p(cy82c693_remove),
};
static int __init cy82c693_ide_init(void)
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
- .remove = hpt366_remove,
+ .remove = __devexit_p(hpt366_remove),
};
static int __init hpt366_ide_init(void)
.name = "ITE821x IDE",
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
- .remove = it821x_remove,
+ .remove = __devexit_p(it821x_remove),
};
static int __init it821x_ide_init(void)
.name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
- .remove = pdc202new_remove,
+ .remove = __devexit_p(pdc202new_remove),
};
static int __init pdc202new_ide_init(void)
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
- .remove = scc_remove,
+ .remove = __devexit_p(scc_remove),
};
static int scc_ide_init(void)
if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
DRV_NAME)) {
printk(KERN_ERR
- "%s : %s -- ERROR, Addresses "
+ "%s %s: -- ERROR, Addresses "
"0x%p to 0x%p ALREADY in use\n",
- __func__, DRV_NAME, (void *) cmd_phys_base,
+ DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
(void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
return -ENOMEM;
}
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
- .remove = siimage_remove,
+ .remove = __devexit_p(siimage_remove),
};
static int __init siimage_ide_init(void)
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
- .remove = sis5513_remove,
+ .remove = __devexit_p(sis5513_remove),
};
static int __init sis5513_ide_init(void)
.name = "TC86C001",
.id_table = tc86c001_pci_tbl,
.probe = tc86c001_init_one,
- .remove = tc86c001_remove,
+ .remove = __devexit_p(tc86c001_remove),
};
static int __init tc86c001_ide_init(void)
.name = "VIA_IDE",
.id_table = via_pci_tbl,
.probe = via_init_one,
- .remove = via_remove,
+ .remove = __devexit_p(via_remove),
};
static int __init via_ide_init(void)
ne->host = host;
ne->nodeid = nodeid;
ne->generation = generation;
- ne->needs_probe = 1;
+ ne->needs_probe = true;
ne->guid = guid;
ne->guid_vendor_id = (guid >> 40) & 0xffffff;
struct csr1212_keyval *kv, *vendor_name_kv = NULL;
u8 last_key_id = 0;
- ne->needs_probe = 0;
+ ne->needs_probe = false;
csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) {
switch (kv->key.id) {
nodemgr_update_bus_options(ne);
/* Mark the node as new, so it gets re-probed */
- ne->needs_probe = 1;
+ ne->needs_probe = true;
} else {
/* old cache is valid, so update its generation */
struct nodemgr_csr_info *ci = ne->csr->private;
struct probe_param {
struct host_info *hi;
int generation;
+ bool probe_now;
};
-static int __nodemgr_node_probe(struct device *dev, void *data)
+static int node_probe(struct device *dev, void *data)
{
- struct probe_param *param = (struct probe_param *)data;
+ struct probe_param *p = data;
struct node_entry *ne;
+ if (p->generation != get_hpsb_generation(p->hi->host))
+ return -EAGAIN;
+
ne = container_of(dev, struct node_entry, node_dev);
- if (!ne->needs_probe)
- nodemgr_probe_ne(param->hi, ne, param->generation);
- if (ne->needs_probe)
- nodemgr_probe_ne(param->hi, ne, param->generation);
+ if (ne->needs_probe == p->probe_now)
+ nodemgr_probe_ne(p->hi, ne, p->generation);
return 0;
}
static void nodemgr_node_probe(struct host_info *hi, int generation)
{
- struct hpsb_host *host = hi->host;
- struct probe_param param;
+ struct probe_param p;
- param.hi = hi;
- param.generation = generation;
- /* Do some processing of the nodes we've probed. This pulls them
+ p.hi = hi;
+ p.generation = generation;
+ /*
+ * Do some processing of the nodes we've probed. This pulls them
* into the sysfs layer if needed, and can result in processing of
* unit-directories, or just updating the node and it's
* unit-directories.
*
* Run updates before probes. Usually, updates are time-critical
- * while probes are time-consuming. (Well, those probes need some
- * improvement...) */
-
- class_for_each_device(&nodemgr_ne_class, NULL, ¶m,
- __nodemgr_node_probe);
-
- /* If we had a bus reset while we were scanning the bus, it is
- * possible that we did not probe all nodes. In that case, we
- * skip the clean up for now, since we could remove nodes that
- * were still on the bus. Another bus scan is pending which will
- * do the clean up eventually.
+ * while probes are time-consuming.
*
+ * Meanwhile, another bus reset may have happened. In this case we
+ * skip everything here and let the next bus scan handle it.
+ * Otherwise we may prematurely remove nodes which are still there.
+ */
+ p.probe_now = false;
+ if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+ return;
+
+ p.probe_now = true;
+ if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+ return;
+ /*
* Now let's tell the bus to rescan our devices. This may seem
* like overhead, but the driver-model core will only scan a
* device for a driver when either the device is added, or when a
* new driver is added. A bus reset is a good reason to rescan
* devices that were there before. For example, an sbp2 device
* may become available for login, if the host that held it was
- * just removed. */
-
- if (generation == get_hpsb_generation(host))
- if (bus_rescan_devices(&ieee1394_bus_type))
- HPSB_DEBUG("bus_rescan_devices had an error");
+ * just removed.
+ */
+ if (bus_rescan_devices(&ieee1394_bus_type) != 0)
+ HPSB_DEBUG("bus_rescan_devices had an error");
}
static int nodemgr_send_resume_packet(struct hpsb_host *host)
struct hpsb_host *host; /* Host this node is attached to */
nodeid_t nodeid; /* NodeID */
struct bus_options busopt; /* Bus Options */
- int needs_probe;
+ bool needs_probe;
unsigned int generation; /* Synced with hpsb generation */
/* The following is read from the config rom */
{
struct sbp2_lu *lu = ud->device.driver_data;
- if (sbp2_reconnect_device(lu)) {
- /* Reconnect has failed. Perhaps we didn't reconnect fast
- * enough. Try a regular login, but first log out just in
- * case of any weirdness. */
+ if (sbp2_reconnect_device(lu) != 0) {
+ /*
+ * Reconnect failed. If another bus reset happened,
+ * let nodemgr proceed and call sbp2_update again later
+ * (or sbp2_remove if this node went away).
+ */
+ if (!hpsb_node_entry_valid(lu->ne))
+ return 0;
+ /*
+ * Or the target rejected the reconnect because we weren't
+ * fast enough. Try a regular login, but first log out
+ * just in case of any weirdness.
+ */
sbp2_logout_device(lu);
- if (sbp2_login_device(lu)) {
- /* Login failed too, just fail, and the backend
- * will call our sbp2_remove for us */
+ if (sbp2_login_device(lu) != 0) {
+ if (!hpsb_node_entry_valid(lu->ne))
+ return 0;
+
+ /* Maybe another initiator won the login. */
SBP2_ERR("Failed to reconnect to sbp2 device!");
return -EBUSY;
}
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <linux/version.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/device.h>
* SOFTWARE.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/mount.h>
"not 2KB aligned!\n", pa);
return;
}
- if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+ if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
ipath_dev_err(dd,
"BUG: Physical page address 0x%lx "
"larger than supported\n", pa);
u16 lrh0;
u16 lid;
int ret = 0;
+ int next_cur;
spin_lock_irqsave(&qp->s_lock, flags);
goto bail;
wqe = get_swqe_ptr(qp, qp->s_cur);
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
+ next_cur = qp->s_cur + 1;
+ if (next_cur >= qp->s_size)
+ next_cur = 0;
/* Construct the header. */
ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
qp->s_flags |= IPATH_S_WAIT_DMA;
goto bail;
}
+ qp->s_cur = next_cur;
spin_unlock_irqrestore(&qp->s_lock, flags);
ipath_ud_loopback(qp, wqe);
spin_lock_irqsave(&qp->s_lock, flags);
}
}
+ qp->s_cur = next_cur;
extra_bytes = -wqe->length & 3;
nwords = (wqe->length + extra_bytes) >> 2;
#include <linux/dma-mapping.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <asm/io.h>
#include <linux/crc32c.h>
netif_stop_queue(dev);
- /*
- * Now flush workqueue to make sure a scheduled task doesn't
- * bring our internal state back up.
- */
- flush_workqueue(ipoib_workqueue);
-
- ipoib_ib_dev_down(dev, 1);
- ipoib_ib_dev_stop(dev, 1);
+ ipoib_ib_dev_down(dev, 0);
+ ipoib_ib_dev_stop(dev, 0);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
struct ipoib_dev_priv *cpriv;
register_failed:
ib_unregister_event_handler(&priv->event_handler);
- flush_scheduled_work();
+ flush_workqueue(ipoib_workqueue);
event_failed:
ipoib_dev_cleanup(priv->dev);
list_for_each_entry_safe(priv, tmp, dev_list, list) {
ib_unregister_event_handler(&priv->event_handler);
- flush_scheduled_work();
+
+ rtnl_lock();
+ dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
+ rtnl_unlock();
+
+ flush_workqueue(ipoib_workqueue);
unregister_netdev(priv->dev);
ipoib_dev_cleanup(priv->dev);
&priv->mcast_task, 0);
mutex_unlock(&mcast_mutex);
- if (mcast == priv->broadcast)
+ if (mcast == priv->broadcast) {
+ /*
+ * Take RTNL lock here to avoid racing with
+ * ipoib_stop() and turning the carrier back
+ * on while a device is being removed.
+ */
+ rtnl_lock();
netif_carrier_on(dev);
+ rtnl_unlock();
+ }
return 0;
}
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include "iscsi_iser.h"
return copy_to_user(p, str, len) ? -EFAULT : len;
}
+#define OLD_KEY_MAX 0x1ff
+static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode)
+{
+ static unsigned long keymax_warn_time;
+ unsigned long *bits;
+ int len;
+
+ switch (_IOC_NR(cmd) & EV_MAX) {
+
+ case 0: bits = dev->evbit; len = EV_MAX; break;
+ case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
+ case EV_REL: bits = dev->relbit; len = REL_MAX; break;
+ case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
+ case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
+ case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
+ case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
+ case EV_FF: bits = dev->ffbit; len = FF_MAX; break;
+ case EV_SW: bits = dev->swbit; len = SW_MAX; break;
+ default: return -EINVAL;
+ }
+
+ /*
+ * Work around bugs in userspace programs that like to do
+ * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len'
+ * should be in bytes, not in bits.
+ */
+ if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) {
+ len = OLD_KEY_MAX;
+ if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
+ printk(KERN_WARNING
+ "evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
+ "limiting output to %zu bytes. See "
+ "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+ OLD_KEY_MAX,
+ BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+ }
+
+ return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
+}
+#undef OLD_KEY_MAX
+
static long evdev_do_ioctl(struct file *file, unsigned int cmd,
void __user *p, int compat_mode)
{
if (_IOC_DIR(cmd) == _IOC_READ) {
- if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) {
-
- unsigned long *bits;
- int len;
-
- switch (_IOC_NR(cmd) & EV_MAX) {
-
- case 0: bits = dev->evbit; len = EV_MAX; break;
- case EV_KEY: bits = dev->keybit; len = KEY_MAX; break;
- case EV_REL: bits = dev->relbit; len = REL_MAX; break;
- case EV_ABS: bits = dev->absbit; len = ABS_MAX; break;
- case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break;
- case EV_LED: bits = dev->ledbit; len = LED_MAX; break;
- case EV_SND: bits = dev->sndbit; len = SND_MAX; break;
- case EV_FF: bits = dev->ffbit; len = FF_MAX; break;
- case EV_SW: bits = dev->swbit; len = SW_MAX; break;
- default: return -EINVAL;
- }
- return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode);
- }
+ if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0)))
+ return handle_eviocgbit(dev, cmd, p, compat_mode);
if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0)))
return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd),
{ 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
+ { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/fs.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/fs.h>
unsigned int type = button->type ?: EV_KEY;
bdata->input = input;
+ bdata->button = button;
setup_timer(&bdata->timer,
gpio_check_button, (unsigned long)bdata);
#define gpio_keys_resume NULL
#endif
-struct platform_driver gpio_keys_device_driver = {
+static struct platform_driver gpio_keys_device_driver = {
.probe = gpio_keys_probe,
.remove = __devexit_p(gpio_keys_remove),
.suspend = gpio_keys_suspend,
return 0;
}
+MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_DESCRIPTION("Cobalt button interface driver");
+MODULE_LICENSE("GPL");
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:Cobalt buttons");
To compile this driver as a module, choose M here: the
module will be called appletouch.
+config MOUSE_BCM5974
+ tristate "Apple USB BCM5974 Multitouch trackpad support"
+ depends on USB_ARCH_HAS_HCD
+ select USB
+ help
+ Say Y here if you have an Apple USB BCM5974 Multitouch
+ trackpad.
+
+ The BCM5974 is the multitouch trackpad found in the Macbook
+ Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops.
+
+ It is also found in the IPhone (2007) and Ipod Touch (2008).
+
+ This driver provides multitouch functionality together with
+ the synaptics X11 driver.
+
+ The interface is currently identical to the appletouch interface,
+ for further information, see
+ <file:Documentation/input/appletouch.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm5974.
+
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
depends on ISA
obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o
obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
+obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
--- /dev/null
+/*
+ * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver
+ *
+ * Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * The USB initialization and package decoding was made by
+ * Scott Shawcroft as part of the touchd user-space driver project:
+ * Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+ *
+ * The BCM5974 driver is based on the appletouch driver:
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+#include <linux/mutex.h>
+
+#define USB_VENDOR_ID_APPLE 0x05ac
+
+/* MacbookAir, aka wellspring */
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI 0x0223
+#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO 0x0224
+#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS 0x0225
+/* MacbookProPenryn, aka wellspring2 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
+#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+
+#define BCM5974_DEVICE(prod) { \
+ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL), \
+ .idVendor = USB_VENDOR_ID_APPLE, \
+ .idProduct = (prod), \
+ .bInterfaceClass = USB_INTERFACE_CLASS_HID, \
+ .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE \
+}
+
+/* table of devices that work with this driver */
+static const struct usb_device_id bcm5974_table [] = {
+ /* MacbookAir1.1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS),
+ /* MacbookProPenryn */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Terminating entry */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, bcm5974_table);
+
+MODULE_AUTHOR("Henrik Rydberg");
+MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver");
+MODULE_LICENSE("GPL");
+
+#define dprintk(level, format, a...)\
+ { if (debug >= level) printk(KERN_DEBUG format, ##a); }
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* button data structure */
+struct bt_data {
+ u8 unknown1; /* constant */
+ u8 button; /* left button */
+ u8 rel_x; /* relative x coordinate */
+ u8 rel_y; /* relative y coordinate */
+};
+
+/* trackpad header structure */
+struct tp_header {
+ u8 unknown1[16]; /* constants, timers, etc */
+ u8 fingers; /* number of fingers on trackpad */
+ u8 unknown2[9]; /* constants, timers, etc */
+};
+
+/* trackpad finger structure */
+struct tp_finger {
+ __le16 origin; /* left/right origin? */
+ __le16 abs_x; /* absolute x coodinate */
+ __le16 abs_y; /* absolute y coodinate */
+ __le16 rel_x; /* relative x coodinate */
+ __le16 rel_y; /* relative y coodinate */
+ __le16 size_major; /* finger size, major axis? */
+ __le16 size_minor; /* finger size, minor axis? */
+ __le16 orientation; /* 16384 when point, else 15 bit angle */
+ __le16 force_major; /* trackpad force, major axis? */
+ __le16 force_minor; /* trackpad force, minor axis? */
+ __le16 unused[3]; /* zeros */
+ __le16 multi; /* one finger: varies, more fingers: constant */
+};
+
+/* trackpad data structure, empirically at least ten fingers */
+struct tp_data {
+ struct tp_header header;
+ struct tp_finger finger[16];
+};
+
+/* device-specific parameters */
+struct bcm5974_param {
+ int dim; /* logical dimension */
+ int fuzz; /* logical noise value */
+ int devmin; /* device minimum reading */
+ int devmax; /* device maximum reading */
+};
+
+/* device-specific configuration */
+struct bcm5974_config {
+ int ansi, iso, jis; /* the product id of this device */
+ int bt_ep; /* the endpoint of the button interface */
+ int bt_datalen; /* data length of the button interface */
+ int tp_ep; /* the endpoint of the trackpad interface */
+ int tp_datalen; /* data length of the trackpad interface */
+ struct bcm5974_param p; /* finger pressure limits */
+ struct bcm5974_param w; /* finger width limits */
+ struct bcm5974_param x; /* horizontal limits */
+ struct bcm5974_param y; /* vertical limits */
+};
+
+/* logical device structure */
+struct bcm5974 {
+ char phys[64];
+ struct usb_device *udev; /* usb device */
+ struct usb_interface *intf; /* our interface */
+ struct input_dev *input; /* input dev */
+ struct bcm5974_config cfg; /* device configuration */
+ struct mutex pm_mutex; /* serialize access to open/suspend */
+ int opened; /* 1: opened, 0: closed */
+ struct urb *bt_urb; /* button usb request block */
+ struct bt_data *bt_data; /* button transferred data */
+ struct urb *tp_urb; /* trackpad usb request block */
+ struct tp_data *tp_data; /* trackpad transferred data */
+};
+
+/* logical dimensions */
+#define DIM_PRESSURE 256 /* maximum finger pressure */
+#define DIM_WIDTH 16 /* maximum finger width */
+#define DIM_X 1280 /* maximum trackpad x value */
+#define DIM_Y 800 /* maximum trackpad y value */
+
+/* logical signal quality */
+#define SN_PRESSURE 45 /* pressure signal-to-noise ratio */
+#define SN_WIDTH 100 /* width signal-to-noise ratio */
+#define SN_COORD 250 /* coordinate signal-to-noise ratio */
+
+/* device constants */
+static const struct bcm5974_config bcm5974_config_table[] = {
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0x84, sizeof(struct bt_data),
+ 0x81, sizeof(struct tp_data),
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4824, 5342 },
+ { DIM_Y, DIM_Y / SN_COORD, -172, 5820 }
+ },
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0x84, sizeof(struct bt_data),
+ 0x81, sizeof(struct tp_data),
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4824, 4824 },
+ { DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
+ },
+ {}
+};
+
+/* return the device-specific configuration by device */
+static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev)
+{
+ u16 id = le16_to_cpu(udev->descriptor.idProduct);
+ const struct bcm5974_config *cfg;
+
+ for (cfg = bcm5974_config_table; cfg->ansi; ++cfg)
+ if (cfg->ansi == id || cfg->iso == id || cfg->jis == id)
+ return cfg;
+
+ return bcm5974_config_table;
+}
+
+/* convert 16-bit little endian to signed integer */
+static inline int raw2int(__le16 x)
+{
+ return (signed short)le16_to_cpu(x);
+}
+
+/* scale device data to logical dimensions (asserts devmin < devmax) */
+static inline int int2scale(const struct bcm5974_param *p, int x)
+{
+ return x * p->dim / (p->devmax - p->devmin);
+}
+
+/* all logical value ranges are [0,dim). */
+static inline int int2bound(const struct bcm5974_param *p, int x)
+{
+ int s = int2scale(p, x);
+
+ return clamp_val(s, 0, p->dim - 1);
+}
+
+/* setup which logical events to report */
+static void setup_events_to_report(struct input_dev *input_dev,
+ const struct bcm5974_config *cfg)
+{
+ __set_bit(EV_ABS, input_dev->evbit);
+
+ input_set_abs_params(input_dev, ABS_PRESSURE,
+ 0, cfg->p.dim, cfg->p.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_TOOL_WIDTH,
+ 0, cfg->w.dim, cfg->w.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_X,
+ 0, cfg->x.dim, cfg->x.fuzz, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ 0, cfg->y.dim, cfg->y.fuzz, 0);
+
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_LEFT, input_dev->keybit);
+}
+
+/* report button data as logical button state */
+static int report_bt_state(struct bcm5974 *dev, int size)
+{
+ if (size != sizeof(struct bt_data))
+ return -EIO;
+
+ input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
+ input_sync(dev->input);
+
+ return 0;
+}
+
+/* report trackpad data as logical trackpad state */
+static int report_tp_state(struct bcm5974 *dev, int size)
+{
+ const struct bcm5974_config *c = &dev->cfg;
+ const struct tp_finger *f = dev->tp_data->finger;
+ struct input_dev *input = dev->input;
+ const int fingers = (size - 26) / 28;
+ int p = 0, w, x, y, n = 0;
+
+ if (size < 26 || (size - 26) % 28 != 0)
+ return -EIO;
+
+ if (fingers) {
+ p = raw2int(f->force_major);
+ w = raw2int(f->size_major);
+ x = raw2int(f->abs_x);
+ y = raw2int(f->abs_y);
+ n = p > 0 ? fingers : 0;
+
+ dprintk(9,
+ "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ p, w, x, y, n);
+
+ input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
+ input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
+ input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+ }
+
+ input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+
+ input_report_key(input, BTN_TOOL_FINGER, n == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+
+ input_sync(input);
+
+ return 0;
+}
+
+/* Wellspring initialization constants */
+#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID 1
+#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID 9
+#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300
+#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0
+#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01
+
+static int bcm5974_wellspring_mode(struct bcm5974 *dev)
+{
+ char *data = kmalloc(8, GFP_KERNEL);
+ int retval = 0, size;
+
+ if (!data) {
+ err("bcm5974: out of memory");
+ retval = -ENOMEM;
+ goto out;
+ }
+
+ /* read configuration */
+ size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
+ BCM5974_WELLSPRING_MODE_READ_REQUEST_ID,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+ BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+ if (size != 8) {
+ err("bcm5974: could not read from device");
+ retval = -EIO;
+ goto out;
+ }
+
+ /* apply the mode switch */
+ data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE;
+
+ /* write configuration */
+ size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
+ BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ BCM5974_WELLSPRING_MODE_REQUEST_VALUE,
+ BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000);
+
+ if (size != 8) {
+ err("bcm5974: could not write to device");
+ retval = -EIO;
+ goto out;
+ }
+
+ dprintk(2, "bcm5974: switched to wellspring mode.\n");
+
+ out:
+ kfree(data);
+ return retval;
+}
+
+static void bcm5974_irq_button(struct urb *urb)
+{
+ struct bcm5974 *dev = urb->context;
+ int error;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EOVERFLOW:
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dbg("bcm5974: button urb shutting down: %d", urb->status);
+ return;
+ default:
+ dbg("bcm5974: button urb status: %d", urb->status);
+ goto exit;
+ }
+
+ if (report_bt_state(dev, dev->bt_urb->actual_length))
+ dprintk(1, "bcm5974: bad button package, length: %d\n",
+ dev->bt_urb->actual_length);
+
+exit:
+ error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC);
+ if (error)
+ err("bcm5974: button urb failed: %d", error);
+}
+
+static void bcm5974_irq_trackpad(struct urb *urb)
+{
+ struct bcm5974 *dev = urb->context;
+ int error;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -EOVERFLOW:
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ dbg("bcm5974: trackpad urb shutting down: %d", urb->status);
+ return;
+ default:
+ dbg("bcm5974: trackpad urb status: %d", urb->status);
+ goto exit;
+ }
+
+ /* control response ignored */
+ if (dev->tp_urb->actual_length == 2)
+ goto exit;
+
+ if (report_tp_state(dev, dev->tp_urb->actual_length))
+ dprintk(1, "bcm5974: bad trackpad package, length: %d\n",
+ dev->tp_urb->actual_length);
+
+exit:
+ error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC);
+ if (error)
+ err("bcm5974: trackpad urb failed: %d", error);
+}
+
+/*
+ * The Wellspring trackpad, like many recent Apple trackpads, share
+ * the usb device with the keyboard. Since keyboards are usually
+ * handled by the HID system, the device ends up being handled by two
+ * modules. Setting up the device therefore becomes slightly
+ * complicated. To enable multitouch features, a mode switch is
+ * required, which is usually applied via the control interface of the
+ * device. It can be argued where this switch should take place. In
+ * some drivers, like appletouch, the switch is made during
+ * probe. However, the hid module may also alter the state of the
+ * device, resulting in trackpad malfunction under certain
+ * circumstances. To get around this problem, there is at least one
+ * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
+ * recieve a reset_resume request rather than the normal resume.
+ * Since the implementation of reset_resume is equal to mode switch
+ * plus start_traffic, it seems easier to always do the switch when
+ * starting traffic on the device.
+ */
+static int bcm5974_start_traffic(struct bcm5974 *dev)
+{
+ if (bcm5974_wellspring_mode(dev)) {
+ dprintk(1, "bcm5974: mode switch failed\n");
+ goto error;
+ }
+
+ if (usb_submit_urb(dev->bt_urb, GFP_KERNEL))
+ goto error;
+
+ if (usb_submit_urb(dev->tp_urb, GFP_KERNEL))
+ goto err_kill_bt;
+
+ return 0;
+
+err_kill_bt:
+ usb_kill_urb(dev->bt_urb);
+error:
+ return -EIO;
+}
+
+static void bcm5974_pause_traffic(struct bcm5974 *dev)
+{
+ usb_kill_urb(dev->tp_urb);
+ usb_kill_urb(dev->bt_urb);
+}
+
+/*
+ * The code below implements open/close and manual suspend/resume.
+ * All functions may be called in random order.
+ *
+ * Opening a suspended device fails with EACCES - permission denied.
+ *
+ * Failing a resume leaves the device resumed but closed.
+ */
+static int bcm5974_open(struct input_dev *input)
+{
+ struct bcm5974 *dev = input_get_drvdata(input);
+ int error;
+
+ error = usb_autopm_get_interface(dev->intf);
+ if (error)
+ return error;
+
+ mutex_lock(&dev->pm_mutex);
+
+ error = bcm5974_start_traffic(dev);
+ if (!error)
+ dev->opened = 1;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ if (error)
+ usb_autopm_put_interface(dev->intf);
+
+ return error;
+}
+
+static void bcm5974_close(struct input_dev *input)
+{
+ struct bcm5974 *dev = input_get_drvdata(input);
+
+ mutex_lock(&dev->pm_mutex);
+
+ bcm5974_pause_traffic(dev);
+ dev->opened = 0;
+
+ mutex_unlock(&dev->pm_mutex);
+
+ usb_autopm_put_interface(dev->intf);
+}
+
+static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+
+ mutex_lock(&dev->pm_mutex);
+
+ if (dev->opened)
+ bcm5974_pause_traffic(dev);
+
+ mutex_unlock(&dev->pm_mutex);
+
+ return 0;
+}
+
+static int bcm5974_resume(struct usb_interface *iface)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+ int error = 0;
+
+ mutex_lock(&dev->pm_mutex);
+
+ if (dev->opened)
+ error = bcm5974_start_traffic(dev);
+
+ mutex_unlock(&dev->pm_mutex);
+
+ return error;
+}
+
+static int bcm5974_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(iface);
+ const struct bcm5974_config *cfg;
+ struct bcm5974 *dev;
+ struct input_dev *input_dev;
+ int error = -ENOMEM;
+
+ /* find the product index */
+ cfg = bcm5974_get_config(udev);
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("bcm5974: out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->intf = iface;
+ dev->input = input_dev;
+ dev->cfg = *cfg;
+ mutex_init(&dev->pm_mutex);
+
+ /* setup urbs */
+ dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->bt_urb)
+ goto err_free_devs;
+
+ dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->tp_urb)
+ goto err_free_bt_urb;
+
+ dev->bt_data = usb_buffer_alloc(dev->udev,
+ dev->cfg.bt_datalen, GFP_KERNEL,
+ &dev->bt_urb->transfer_dma);
+ if (!dev->bt_data)
+ goto err_free_urb;
+
+ dev->tp_data = usb_buffer_alloc(dev->udev,
+ dev->cfg.tp_datalen, GFP_KERNEL,
+ &dev->tp_urb->transfer_dma);
+ if (!dev->tp_data)
+ goto err_free_bt_buffer;
+
+ usb_fill_int_urb(dev->bt_urb, udev,
+ usb_rcvintpipe(udev, cfg->bt_ep),
+ dev->bt_data, dev->cfg.bt_datalen,
+ bcm5974_irq_button, dev, 1);
+
+ usb_fill_int_urb(dev->tp_urb, udev,
+ usb_rcvintpipe(udev, cfg->tp_ep),
+ dev->tp_data, dev->cfg.tp_datalen,
+ bcm5974_irq_trackpad, dev, 1);
+
+ /* create bcm5974 device */
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input_dev->name = "bcm5974";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->dev.parent = &iface->dev;
+
+ input_set_drvdata(input_dev, dev);
+
+ input_dev->open = bcm5974_open;
+ input_dev->close = bcm5974_close;
+
+ setup_events_to_report(input_dev, cfg);
+
+ error = input_register_device(dev->input);
+ if (error)
+ goto err_free_buffer;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
+
+ return 0;
+
+err_free_buffer:
+ usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+ dev->tp_data, dev->tp_urb->transfer_dma);
+err_free_bt_buffer:
+ usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+ dev->bt_data, dev->bt_urb->transfer_dma);
+err_free_urb:
+ usb_free_urb(dev->tp_urb);
+err_free_bt_urb:
+ usb_free_urb(dev->bt_urb);
+err_free_devs:
+ usb_set_intfdata(iface, NULL);
+ input_free_device(input_dev);
+ kfree(dev);
+ return error;
+}
+
+static void bcm5974_disconnect(struct usb_interface *iface)
+{
+ struct bcm5974 *dev = usb_get_intfdata(iface);
+
+ usb_set_intfdata(iface, NULL);
+
+ input_unregister_device(dev->input);
+ usb_buffer_free(dev->udev, dev->cfg.tp_datalen,
+ dev->tp_data, dev->tp_urb->transfer_dma);
+ usb_buffer_free(dev->udev, dev->cfg.bt_datalen,
+ dev->bt_data, dev->bt_urb->transfer_dma);
+ usb_free_urb(dev->tp_urb);
+ usb_free_urb(dev->bt_urb);
+ kfree(dev);
+}
+
+static struct usb_driver bcm5974_driver = {
+ .name = "bcm5974",
+ .probe = bcm5974_probe,
+ .disconnect = bcm5974_disconnect,
+ .suspend = bcm5974_suspend,
+ .resume = bcm5974_resume,
+ .reset_resume = bcm5974_resume,
+ .id_table = bcm5974_table,
+ .supports_autosuspend = 1,
+};
+
+static int __init bcm5974_init(void)
+{
+ return usb_register(&bcm5974_driver);
+}
+
+static void __exit bcm5974_exit(void)
+{
+ usb_deregister(&bcm5974_driver);
+}
+
+module_init(bcm5974_init);
+module_exit(bcm5974_exit);
+
*/
#include <linux/init.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"),
},
},
+ {
+ .ident = "Acer TravelMate 4280",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"),
+ },
+ },
{ }
};
* we have the PS2 in a good state */
out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
- dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
- drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+ dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n",
+ drvdata->phys_addr, drvdata->base_address, drvdata->irq);
serio = &drvdata->serio;
serio->id.type = SERIO_8042;
#include <asm/byteorder.h>
-#include <linux/version.h>
#include <linux/usb/input.h>
/* Version with a Major number of 2 is for kernel inclusion only. */
config TOUCHSCREEN_WM9705
bool "WM9705 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9705
- touchscreen controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9705 touchscreen controller.
config TOUCHSCREEN_WM9712
bool "WM9712 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9712
- touchscreen controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9712 touchscreen controller.
config TOUCHSCREEN_WM9713
bool "WM9713 Touchscreen interface support"
depends on TOUCHSCREEN_WM97XX
+ default y
help
- Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen
- controller connected to your system.
-
- If unsure, say N.
+ Say Y here to enable support for the Wolfson Microelectronics
+ WM9713 touchscreen controller.
config TOUCHSCREEN_WM97XX_MAINSTONE
tristate "WM97xx Mainstone accelerated touch"
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
- input->name = client->driver_name;
+ input->name = client->name;
input->id.bustype = BUS_I2C;
input->dev.parent = &client->dev;
goto err1;
error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
- client->driver_name, priv);
+ client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err2;
return 0;
}
+static const struct i2c_device_id migor_ts_id[] = {
+ { "migor_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
static struct i2c_driver migor_ts_driver = {
.driver = {
.name = "migor_ts",
},
.probe = migor_ts_probe,
.remove = migor_ts_remove,
+ .id_table = migor_ts_id,
};
static int __init migor_ts_init(void)
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
}
+static void md_safemode_timeout(unsigned long data);
+
static ssize_t
safe_delay_show(mddev_t *mddev, char *page)
{
if (msec == 0)
mddev->safemode_delay = 0;
else {
+ unsigned long old_delay = mddev->safemode_delay;
mddev->safemode_delay = (msec*HZ)/1000;
if (mddev->safemode_delay == 0)
mddev->safemode_delay = 1;
+ if (mddev->safemode_delay < old_delay)
+ md_safemode_timeout((unsigned long)mddev);
}
return len;
}
*/
if (mddev->sync_thread)
return -EBUSY;
+ if (mddev->bitmap)
+ /* Sorry, cannot grow a bitmap yet, just remove it,
+ * grow, and re-add.
+ */
+ return -EBUSY;
rdev_for_each(rdev, tmp, mddev) {
sector_t avail;
avail = rdev->size * 2;
}
}
- if (mddev->degraded) {
+ if (mddev->degraded && ! mddev->ro) {
rdev_for_each(rdev, rtmp, mddev) {
if (rdev->raid_disk >= 0 &&
!test_bit(In_sync, &rdev->flags) &&
flush_signals(current);
}
+ if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
+ return;
if ( ! (
(mddev->flags && !mddev->external) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
if (mddev_trylock(mddev)) {
int spares = 0;
+ if (mddev->ro) {
+ /* Only thing we do on a ro array is remove
+ * failed devices.
+ */
+ remove_and_add_spares(mddev);
+ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ goto unlock;
+ }
+
if (!mddev->external) {
int did_change = 0;
spin_lock_irq(&mddev->write_lock);
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) &&
+ !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
/* success...*/
/* activate any spares */
if (mddev->pers->spare_active(mddev))
} else if ((spares = remove_and_add_spares(mddev))) {
clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
+ clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
} else if (mddev->recovery_cp < MaxSector) {
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
for_each_mddev(mddev, tmp)
if (mddev_trylock(mddev)) {
- do_md_stop (mddev, 1, 0);
+ /* Force a switch to readonly even array
+ * appears to still be in use. Hence
+ * the '100'.
+ */
+ do_md_stop (mddev, 1, 100);
mddev_unlock(mddev);
}
/*
kfree(r10_bio);
}
+/* Maximum size of each resync request */
#define RESYNC_BLOCK_SIZE (64*1024)
-//#define RESYNC_BLOCK_SIZE PAGE_SIZE
-#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9)
#define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
-#define RESYNC_WINDOW (2048*1024)
+/* amount of memory to reserve for resync requests */
+#define RESYNC_WINDOW (1024*1024)
+/* maximum number of concurrent requests, memory permitting */
+#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
/*
* When performing a resync, we need to read and compare, so
* there is no normal IO happeing. It must arrange to call
* lower_barrier when the particular background IO completes.
*/
-#define RESYNC_DEPTH 32
static void raise_barrier(conf_t *conf, int force)
{
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
- break;
}
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- goto unlock;
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
}
if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
if (dev->written)
s.written++;
rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
+ if (blocked_rdev == NULL &&
+ rdev && unlikely(test_bit(Blocked, &rdev->flags))) {
blocked_rdev = rdev;
atomic_inc(&rdev->nr_pending);
- break;
}
if (!rdev || !test_bit(In_sync, &rdev->flags)) {
/* The ReadError flag will just be confusing now */
rcu_read_unlock();
if (unlikely(blocked_rdev)) {
- set_bit(STRIPE_HANDLE, &sh->state);
- goto unlock;
+ if (s.syncing || s.expanding || s.expanded ||
+ s.to_write || s.written) {
+ set_bit(STRIPE_HANDLE, &sh->state);
+ goto unlock;
+ }
+ /* There is nothing for the blocked_rdev to block */
+ rdev_dec_pending(blocked_rdev, conf->mddev);
+ blocked_rdev = NULL;
}
+
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
return -EINVAL; /* Cannot shrink array or change level yet */
if (mddev->delta_disks == 0)
return 0; /* nothing to do */
+ if (mddev->bitmap)
+ /* Cannot grow a bitmap yet */
+ return -EBUSY;
/* Can only proceed if there are plenty of stripe_heads.
* We need a minimum of one full stripe,, and for sensible progress
*
*/
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/gpio.h>
static void set_quirks(void)
{
+ if (!interface)
+ return;
+
if (quirks->mailled)
interface->capability |= ACER_CAP_MAILLED;
static acpi_status set_u32(u32 value, u32 cap)
{
+ acpi_status status;
+
if (interface->capability & cap) {
switch (interface->type) {
case ACER_AMW0:
return AMW0_set_u32(value, cap, interface);
case ACER_AMW0_V2:
+ if (cap == ACER_CAP_MAILLED)
+ return AMW0_set_u32(value, cap, interface);
+
+ /*
+ * On some models, some WMID methods don't toggle
+ * properly. For those cases, we want to run the AMW0
+ * method afterwards to be certain we've really toggled
+ * the device state.
+ */
+ if (cap == ACER_CAP_WIRELESS ||
+ cap == ACER_CAP_BLUETOOTH) {
+ status = WMID_set_u32(value, cap, interface);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ return AMW0_set_u32(value, cap, interface);
+ }
case ACER_WMID:
return WMID_set_u32(value, cap, interface);
default:
return -ENODEV;
}
+ set_quirks();
+
if (platform_driver_register(&acer_platform_driver)) {
printk(ACER_ERR "Unable to register platform driver.\n");
goto error_platform_register;
hwmon = eeepc_hwmon_device;
if (!hwmon)
return ;
- hwmon_device_unregister(hwmon);
sysfs_remove_group(&hwmon->kobj,
&hwmon_attribute_group);
+ hwmon_device_unregister(hwmon);
eeepc_hwmon_device = NULL;
}
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/eeprom_93cx6.h>
return IRQ_HANDLED;
}
-void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id,
- int size, enum s3c2410_dma_buffresult result)
+static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch,
+ void *buf_id, int size,
+ enum s3c2410_dma_buffresult result)
{
struct s3cmci_host *host = buf_id;
unsigned long iflags;
mmc_request_done(host->mmc, mrq);
}
-
-void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source)
+static void s3cmci_dma_setup(struct s3cmci_host *host,
+ enum s3c2410_dmasrc source)
{
static enum s3c2410_dmasrc last_source = -1;
static int setup_ok;
enable_irq(host->irq);
}
-static int s3cmci_card_present(struct s3cmci_host *host)
+static int s3cmci_card_present(struct mmc_host *mmc)
{
+ struct s3cmci_host *host = mmc_priv(mmc);
struct s3c24xx_mci_pdata *pdata = host->pdata;
int ret;
host->cmd_is_stop = 0;
host->mrq = mrq;
- if (s3cmci_card_present(host) == 0) {
+ if (s3cmci_card_present(mmc) == 0) {
dbg(host, dbg_err, "%s: no medium present\n", __func__);
host->mrq->cmd->error = -ENOMEDIUM;
mmc_request_done(mmc, mrq);
.request = s3cmci_request,
.set_ios = s3cmci_set_ios,
.get_ro = s3cmci_get_ro,
+ .get_cd = s3cmci_card_present,
};
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
}
host->base = ioremap(host->mem->start, RESSIZE(host->mem));
- if (host->base == 0) {
+ if (!host->base) {
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
ret = -EINVAL;
goto probe_free_mem_region;
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/scatterlist.h>
-#include <linux/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/module.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
-#include <linux/version.h>
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <mach/hardware.h>
-#include <asm/plat-orion/orion_nand.h>
+#include <plat/orion_nand.h>
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_probes[] = { "cmdlinepart", NULL };
config NE2000
tristate "NE2000/NE1000 support"
- depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+ depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
select CRC32
---help---
If you have a network (Ethernet) card of this type, say Y and read
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/ioport.h>
if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
phys = dma_map_single(&dev->dev, skb->data,
RX_BUFF_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(phys)) {
+ if (dma_mapping_error(&dev->dev, phys)) {
dev_kfree_skb(skb);
skb = NULL;
}
#endif
phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
- if (dma_mapping_error(phys)) {
+ if (dma_mapping_error(&dev->dev, phys)) {
#ifdef __ARMEB__
dev_kfree_skb(skb);
#else
desc->buf_len = MAX_MRU;
desc->data = dma_map_single(&port->netdev->dev, data,
RX_BUFF_SIZE, DMA_FROM_DEVICE);
- if (dma_mapping_error(desc->data)) {
+ if (dma_mapping_error(&port->netdev->dev, desc->data)) {
free_buffer(buff);
return -EIO;
}
struct atl1e_adapter *adapter = netdev_priv(netdev);
if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
- WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+ WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
return -EOPNOTSUPP;
/* these settings will always override what we currently have */
adapter->wol = 0;
static int au1000_init(struct net_device *dev)
{
struct au1000_private *aup = (struct au1000_private *) dev->priv;
- u32 flags;
+ unsigned long flags;
int i;
u32 control;
spin_lock_irqsave(&ax->mii_lock, flags);
mii_ethtool_gset(&ax->mii, cmd);
- spin_lock_irqsave(&ax->mii_lock, flags);
+ spin_unlock_irqrestore(&ax->mii_lock, flags);
return 0;
}
spin_lock_irqsave(&ax->mii_lock, flags);
rc = mii_ethtool_sset(&ax->mii, cmd);
- spin_lock_irqsave(&ax->mii_lock, flags);
+ spin_unlock_irqrestore(&ax->mii_lock, flags);
return rc;
}
#include <linux/time.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
#include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define BCM_VLAN 1
#endif
#include <net/ip.h>
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.7.9"
-#define DRV_MODULE_RELDATE "July 18, 2008"
+#define DRV_MODULE_VERSION "1.8.0"
+#define DRV_MODULE_RELDATE "Aug 14, 2008"
#define RUN_AT(x) (jiffies + (x))
struct sw_bd *rx_buf;
struct sk_buff *skb;
dma_addr_t dma_addr;
+ u16 vtag = 0;
+ int hw_vlan __maybe_unused = 0;
sw_ring_cons = RX_RING_IDX(sw_cons);
sw_ring_prod = RX_RING_IDX(sw_prod);
if (len <= bp->rx_copy_thresh) {
struct sk_buff *new_skb;
- new_skb = netdev_alloc_skb(bp->dev, len + 2);
+ new_skb = netdev_alloc_skb(bp->dev, len + 6);
if (new_skb == NULL) {
bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
sw_ring_prod);
/* aligned copy */
skb_copy_from_linear_data_offset(skb,
- BNX2_RX_OFFSET - 2,
- new_skb->data, len + 2);
- skb_reserve(new_skb, 2);
+ BNX2_RX_OFFSET - 6,
+ new_skb->data, len + 6);
+ skb_reserve(new_skb, 6);
skb_put(new_skb, len);
bnx2_reuse_rx_skb(bp, rxr, skb,
dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
goto next_rx;
+ if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
+ !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
+ vtag = rx_hdr->l2_fhdr_vlan_tag;
+#ifdef BCM_VLAN
+ if (bp->vlgrp)
+ hw_vlan = 1;
+ else
+#endif
+ {
+ struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+ __skb_push(skb, 4);
+
+ memmove(ve, skb->data + 4, ETH_ALEN * 2);
+ ve->h_vlan_proto = htons(ETH_P_8021Q);
+ ve->h_vlan_TCI = htons(vtag);
+ len += 4;
+ }
+ }
+
skb->protocol = eth_type_trans(skb, bp->dev);
if ((len > (bp->dev->mtu + ETH_HLEN)) &&
}
#ifdef BCM_VLAN
- if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
- vlan_hwaccel_receive_skb(skb, bp->vlgrp,
- rx_hdr->l2_fhdr_vlan_tag);
- }
+ if (hw_vlan)
+ vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
else
#endif
netif_receive_skb(skb);
BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
#ifdef BCM_VLAN
- if (!bp->vlgrp && !(bp->flags & BNX2_FLAG_ASF_ENABLE))
+ if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
#else
- if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+ if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
#endif
if (dev->flags & IFF_PROMISC) {
vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
}
+#ifdef BCM_VLAN
if (bp->vlgrp && vlan_tx_tag_present(skb)) {
vlan_tag_flags |=
(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
}
+#endif
if ((mss = skb_shinfo(skb)->gso_size)) {
u32 tcp_opt_len, ip_tcp_len;
struct iphdr *iph;
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/mutex.h>
-#include <linux/version.h>
#include "bnx2x_reg.h"
#include "bnx2x_fw_defs.h"
#include <net/ip.h>
#include <net/tcp.h>
#include <net/checksum.h>
-#include <linux/version.h>
#include <net/ip6_checksum.h>
#include <linux/workqueue.h>
#include <linux/crc32.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
/* Interrupt Cause Set */
#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
/* Transmit Descriptor Control */
#define FLAG_RX_CSUM_ENABLED (1 << 28)
#define FLAG_TSO_FORCE (1 << 29)
#define FLAG_RX_RESTART_NOW (1 << 30)
+#define FLAG_MSI_TEST_FAILED (1 << 31)
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
u32 status;
status = er32(STATUS);
- return (status & E1000_STATUS_LU);
+ return (status & E1000_STATUS_LU) ? 1 : 0;
}
static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
if (new_skb) {
skb_reserve(new_skb, NET_IP_ALIGN);
- memcpy(new_skb->data - NET_IP_ALIGN,
- skb->data - NET_IP_ALIGN,
- length + NET_IP_ALIGN);
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
/* save the skb in buffer_info as good */
buffer_info->skb = skb;
skb = new_skb;
return IRQ_HANDLED;
}
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
static int e1000_request_irq(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- irq_handler_t handler = e1000_intr;
int irq_flags = IRQF_SHARED;
int err;
- if (!pci_enable_msi(adapter->pdev)) {
- adapter->flags |= FLAG_MSI_ENABLED;
- handler = e1000_intr_msi;
- irq_flags = 0;
+ if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->flags |= FLAG_MSI_ENABLED;
+ irq_flags = 0;
+ }
}
- err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
- netdev);
+ err = request_irq(adapter->pdev->irq,
+ ((adapter->flags & FLAG_MSI_ENABLED) ?
+ &e1000_intr_msi : &e1000_intr),
+ irq_flags, netdev->name, netdev);
if (err) {
- e_err("Unable to allocate %s interrupt (return: %d)\n",
- adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err);
- if (adapter->flags & FLAG_MSI_ENABLED)
+ if (adapter->flags & FLAG_MSI_ENABLED) {
pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~FLAG_MSI_ENABLED;
+ }
+ e_err("Unable to allocate interrupt, Error: %d\n", err);
}
return err;
return -ENOMEM;
}
+/**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ e_dbg("%s: icr is %08X\n", netdev->name, icr);
+ if (icr & E1000_ICR_RXSEQ) {
+ adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+ wmb();
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* poll_enable hasn't been called yet, so don't need disable */
+ /* clear any pending events */
+ er32(ICR);
+
+ /* free the real vector and request a test handler */
+ e1000_free_irq(adapter);
+
+ /* Assume that the test fails, if it succeeds then the test
+ * MSI irq handler will unset this flag */
+ adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+ err = pci_enable_msi(adapter->pdev);
+ if (err)
+ goto msi_test_failed;
+
+ err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+ netdev->name, netdev);
+ if (err) {
+ pci_disable_msi(adapter->pdev);
+ goto msi_test_failed;
+ }
+
+ wmb();
+
+ e1000_irq_enable(adapter);
+
+ /* fire an unusual interrupt on the test handler */
+ ew32(ICS, E1000_ICS_RXSEQ);
+ e1e_flush();
+ msleep(50);
+
+ e1000_irq_disable(adapter);
+
+ rmb();
+
+ if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+ err = -EIO;
+ e_info("MSI interrupt test failed!\n");
+ }
+
+ free_irq(adapter->pdev->irq, netdev);
+ pci_disable_msi(adapter->pdev);
+
+ if (err == -EIO)
+ goto msi_test_failed;
+
+ /* okay so the test worked, restore settings */
+ e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+msi_test_failed:
+ /* restore the original vector, even if it failed */
+ e1000_request_irq(adapter);
+ return err;
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+ int err;
+ u16 pci_cmd;
+
+ if (!(adapter->flags & FLAG_MSI_ENABLED))
+ return 0;
+
+ /* disable SERR in case the MSI write causes a master abort */
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+ pci_write_config_word(adapter->pdev, PCI_COMMAND,
+ pci_cmd & ~PCI_COMMAND_SERR);
+
+ err = e1000_test_msi_interrupt(adapter);
+
+ /* restore previous setting of command word */
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+
+ /* success ! */
+ if (!err)
+ return 0;
+
+ /* EIO means MSI test failed */
+ if (err != -EIO)
+ return err;
+
+ /* back to INTx mode */
+ e_warn("MSI interrupt test failed, using legacy interrupt.\n");
+
+ e1000_free_irq(adapter);
+
+ err = e1000_request_irq(adapter);
+
+ return err;
+}
+
/**
* e1000_open - Called when a network interface is made active
* @netdev: network interface device structure
if (err)
goto err_req_irq;
+ /*
+ * Work around PCIe errata with MSI interrupts causing some chipsets to
+ * ignore e1000e MSI messages, which means we need to test our MSI
+ * interrupt now
+ */
+ {
+ err = e1000_test_msi(adapter);
+ if (err) {
+ e_err("Interrupt allocation failed\n");
+ goto err_req_irq;
+ }
+ }
+
/* From here on the code is the same as e1000e_up() */
clear_bit(__E1000_DOWN, &adapter->state);
case SPEED_10:
txb2b = 0;
netdev->tx_queue_len = 10;
- adapter->tx_timeout_factor = 14;
+ adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = 0;
struct e1000_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
- if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+ if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
e_err("Invalid MTU setting\n");
return -EINVAL;
adapter->itr = 20000;
break;
default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
/*
- * save the setting, because the dynamic bits
- * change itr. clear the lower two bits
- * because they are used as control
+ * Save the setting, because the dynamic bits
+ * change itr.
*/
- adapter->itr_setting = adapter->itr & ~3;
+ if (e1000_validate_option(&adapter->itr, &opt,
+ adapter) &&
+ (adapter->itr == 3)) {
+ /*
+ * In case of invalid user value,
+ * default to conservative mode.
+ */
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ } else {
+ /*
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting =
+ adapter->itr & ~3;
+ }
break;
}
} else {
static void gfar_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
void gfar_halt(struct net_device *dev);
-#ifdef CONFIG_PM
static void gfar_halt_nodisable(struct net_device *dev);
-#endif
void gfar_start(struct net_device *dev);
static void gfar_clear_exact_match(struct net_device *dev);
static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
}
-#ifdef CONFIG_PM
/* Halt the receive and transmit queues */
static void gfar_halt_nodisable(struct net_device *dev)
{
cpu_relax();
}
}
-#endif
/* Halt the receive and transmit queues */
void gfar_halt(struct net_device *dev)
struct gfar __iomem *regs = priv->regs;
u32 tempval;
+ gfar_halt_nodisable(dev);
+
/* Disable Rx and Tx */
tempval = gfar_read(®s->maccfg1);
tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
#include <asm/uaccess.h>
#include <linux/module.h>
-#include <linux/version.h>
#include "gianfar.h"
#ifndef __LINUX_IPG_H
#define __LINUX_IPG_H
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/skbuff.h>
-#include <linux/version.h>
#include <asm/bitops.h>
/*
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
media_type = ixgbe_media_type_fiber;
break;
case IXGBE_DEV_ID_82598AT_DUAL_PORT:
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "1.3.18-k2"
+#define DRV_VERSION "1.3.18-k4"
const char ixgbe_driver_version[] = DRV_VERSION;
static const char ixgbe_copyright[] =
"Copyright (c) 1999-2007 Intel Corporation.";
board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
+ board_82598 },
/* required last entry */
{0, }
#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
#define IXGBE_DEV_ID_82598AT_DUAL_PORT 0x10C8
#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
/* General Registers */
#define IXGBE_CTRL 0x00000
unsigned long bytes;
};
-/* KISS: just allocate small chunks and copy bits.
- *
- * So, in fact, this is documentation, explaining what we expect
- * of largesending device modulo TCP checksum, which is ignored for loopback.
- */
-
-#ifdef LOOPBACK_TSO
-static void emulate_large_send_offload(struct sk_buff *skb)
-{
- struct iphdr *iph = ip_hdr(skb);
- struct tcphdr *th = (struct tcphdr *)(skb_network_header(skb) +
- (iph->ihl * 4));
- unsigned int doffset = (iph->ihl + th->doff) * 4;
- unsigned int mtu = skb_shinfo(skb)->gso_size + doffset;
- unsigned int offset = 0;
- u32 seq = ntohl(th->seq);
- u16 id = ntohs(iph->id);
-
- while (offset + doffset < skb->len) {
- unsigned int frag_size = min(mtu, skb->len - offset) - doffset;
- struct sk_buff *nskb = alloc_skb(mtu + 32, GFP_ATOMIC);
-
- if (!nskb)
- break;
- skb_reserve(nskb, 32);
- skb_set_mac_header(nskb, -ETH_HLEN);
- skb_reset_network_header(nskb);
- iph = ip_hdr(nskb);
- skb_copy_to_linear_data(nskb, skb_network_header(skb),
- doffset);
- if (skb_copy_bits(skb,
- doffset + offset,
- nskb->data + doffset,
- frag_size))
- BUG();
- skb_put(nskb, doffset + frag_size);
- nskb->ip_summed = CHECKSUM_UNNECESSARY;
- nskb->dev = skb->dev;
- nskb->priority = skb->priority;
- nskb->protocol = skb->protocol;
- nskb->dst = dst_clone(skb->dst);
- memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
- nskb->pkt_type = skb->pkt_type;
-
- th = (struct tcphdr *)(skb_network_header(nskb) + iph->ihl * 4);
- iph->tot_len = htons(frag_size + doffset);
- iph->id = htons(id);
- iph->check = 0;
- iph->check = ip_fast_csum((unsigned char *) iph, iph->ihl);
- th->seq = htonl(seq);
- if (offset + doffset + frag_size < skb->len)
- th->fin = th->psh = 0;
- netif_rx(nskb);
- offset += frag_size;
- seq += frag_size;
- id++;
- }
-
- dev_kfree_skb(skb);
-}
-#endif /* LOOPBACK_TSO */
-
/*
* The higher levels take care of making this non-reentrant (it's
* called with bh's disabled).
skb_orphan(skb);
skb->protocol = eth_type_trans(skb,dev);
-#ifndef LOOPBACK_MUST_CHECKSUM
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-#endif
#ifdef LOOPBACK_TSO
if (skb_is_gso(skb)) {
dev->type = ARPHRD_LOOPBACK; /* 0x0001*/
dev->flags = IFF_LOOPBACK;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST
-#ifdef LOOPBACK_TSO
| NETIF_F_TSO
-#endif
| NETIF_F_NO_CSUM
| NETIF_F_HIGHDMA
| NETIF_F_LLTX
#include <linux/ethtool.h>
#include <linux/firmware.h>
#include <linux/delay.h>
-#include <linux/version.h>
#include <linux/timer.h>
#include <linux/vmalloc.h>
#include <linux/crc32.h>
/* try to load the slice aware rss firmware */
old_fw = mgp->fw_name;
- if (old_fw == myri10ge_fw_aligned)
+ if (myri10ge_fw_name != NULL) {
+ dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
+ myri10ge_fw_name);
+ mgp->fw_name = myri10ge_fw_name;
+ } else if (old_fw == myri10ge_fw_aligned)
mgp->fw_name = myri10ge_fw_rss_aligned;
else
mgp->fw_name = myri10ge_fw_rss_unaligned;
{"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
{"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
{"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#ifdef CONFIG_MACH_TX49XX
{"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}}, /* Toshiba built-in */
#endif
{"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
#if defined(CONFIG_PLAT_MAPPI)
# define DCR_VAL 0x4b
#elif defined(CONFIG_PLAT_OAKS32R) || \
- defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+ defined(CONFIG_MACH_TX49XX)
# define DCR_VAL 0x48 /* 8-bit mode */
#else
# define DCR_VAL 0x49
#include <linux/in.h>
#include <linux/tcp.h>
#include <linux/skbuff.h>
-#include <linux/version.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#define _NETXEN_NIC_LINUX_MAJOR 4
#define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 0
-#define NETXEN_NIC_LINUX_VERSIONID "4.0.0"
+#define _NETXEN_NIC_LINUX_SUBVERSION 11
+#define NETXEN_NIC_LINUX_VERSIONID "4.0.11"
#define NETXEN_VERSION_CODE(a, b, c) (((a) << 16) + ((b) << 8) + (c))
int netxen_is_flash_supported(struct netxen_adapter *adapter);
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[]);
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
extern void netxen_change_ringparam(struct netxen_adapter *adapter);
extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
int *valp);
#include <asm/io.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
-#include <linux/version.h>
#include "netxen_nic.h"
#include "netxen_nic_hw.h"
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
-
#include <linux/spinlock.h>
#include <asm/irq.h>
#include <linux/init.h>
return 0;
}
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[])
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
{
- __le32 *pmac = (__le32 *) & mac[0];
+ __le32 *pmac = (__le32 *) mac;
+ u32 offset;
- if (netxen_get_flash_block(adapter,
- NETXEN_USER_START +
- offsetof(struct netxen_new_user_info,
- mac_addr),
- FLASH_NUM_PORTS * sizeof(u64), pmac) == -1) {
+ offset = NETXEN_USER_START +
+ offsetof(struct netxen_new_user_info, mac_addr) +
+ adapter->portnum * sizeof(u64);
+
+ if (netxen_get_flash_block(adapter, offset, sizeof(u64), pmac) == -1)
return -1;
- }
+
if (*mac == cpu_to_le64(~0ULL)) {
+
+ offset = NETXEN_USER_START_OLD +
+ offsetof(struct netxen_user_old_info, mac_addr) +
+ adapter->portnum * sizeof(u64);
+
if (netxen_get_flash_block(adapter,
- NETXEN_USER_START_OLD +
- offsetof(struct netxen_user_old_info,
- mac_addr),
- FLASH_NUM_PORTS * sizeof(u64),
- pmac) == -1)
+ offset, sizeof(u64), pmac) == -1)
return -1;
+
if (*mac == cpu_to_le64(~0ULL))
return -1;
}
return 0;
}
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+{
+ uint32_t crbaddr, mac_hi, mac_lo;
+ int pci_func = adapter->ahw.pci_func;
+
+ crbaddr = CRB_MAC_BLOCK_START +
+ (4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
+
+ adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
+ adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+
+ mac_hi = cpu_to_le32(mac_hi);
+ mac_lo = cpu_to_le32(mac_lo);
+
+ if (pci_func & 1)
+ *mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+ else
+ *mac = ((mac_lo) | ((u64)mac_hi << 32));
+
+ return 0;
+}
+
#define CRB_WIN_LOCK_TIMEOUT 100000000
static int crb_win_lock(struct netxen_adapter *adapter)
if (adapter->portnum == 0) {
get_brd_name_by_type(board_info->board_type, brd_name);
- printk("NetXen %s Board S/N %s Chip id 0x%x\n",
- brd_name, serial_num, board_info->chip_id);
- printk("NetXen Firmware version %d.%d.%d\n", fw_major,
- fw_minor, fw_build);
+ printk(KERN_INFO "NetXen %s Board S/N %s Chip rev 0x%x\n",
+ brd_name, serial_num, adapter->ahw.revision_id);
+ printk(KERN_INFO "NetXen Firmware version %d.%d.%d\n",
+ fw_major, fw_minor, fw_build);
}
if (NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build) <
void netxen_free_adapter_offload(struct netxen_adapter *adapter)
{
- int i;
+ int i = 100;
+
+ if (!adapter->dummy_dma.addr)
+ return;
- if (adapter->dummy_dma.addr) {
- i = 100;
+ if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
do {
if (dma_watchdog_shutdown_request(adapter) == 1)
break;
if (dma_watchdog_shutdown_poll_result(adapter) == 1)
break;
} while (--i);
+ }
- if (i) {
- pci_free_consistent(adapter->pdev,
- NETXEN_HOST_DUMMY_DMA_SIZE,
- adapter->dummy_dma.addr,
- adapter->dummy_dma.phys_addr);
- adapter->dummy_dma.addr = NULL;
- } else {
- printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
- adapter->netdev->name);
- }
+ if (i) {
+ pci_free_consistent(adapter->pdev,
+ NETXEN_HOST_DUMMY_DMA_SIZE,
+ adapter->dummy_dma.addr,
+ adapter->dummy_dma.phys_addr);
+ adapter->dummy_dma.addr = NULL;
+ } else {
+ printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+ adapter->netdev->name);
}
}
static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
-static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
{
- u32 mask = 0x7ff;
- int retries = 32;
- int pci_fn = adapter->ahw.pci_func;
-
- if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
- adapter->pci_write_normalize(adapter,
- adapter->crb_intr_mask, 0);
-
- if (adapter->intr_scheme != -1 &&
- adapter->intr_scheme != INTR_SCHEME_PERPORT)
- adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-
- if (!NETXEN_IS_MSI_FAMILY(adapter)) {
- do {
- adapter->pci_write_immediate(adapter,
- adapter->legacy_intr.tgt_status_reg,
- 0xffffffff);
- mask = adapter->pci_read_immediate(adapter,
- ISR_INT_VECTOR);
- if (!(mask & 0x80))
- break;
- udelay(10);
- } while (--retries);
-
- if (!retries) {
- printk(KERN_NOTICE "%s: Failed to disable interrupt\n",
- netxen_nic_driver_name);
- }
- } else {
- if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
- adapter->pci_write_immediate(adapter,
- msi_tgt_status[pci_fn], 0xffffffff);
- }
- }
+ adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0);
}
-static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
{
- u32 mask;
-
- if (adapter->intr_scheme != -1 &&
- adapter->intr_scheme != INTR_SCHEME_PERPORT) {
- switch (adapter->ahw.board_type) {
- case NETXEN_NIC_GBE:
- mask = 0x77b;
- break;
- case NETXEN_NIC_XGBE:
- mask = 0x77f;
- break;
- default:
- mask = 0x7ff;
- break;
- }
-
- adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
- }
-
adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0x1);
- if (!NETXEN_IS_MSI_FAMILY(adapter)) {
- mask = 0xbff;
- if (adapter->intr_scheme == INTR_SCHEME_PERPORT)
- adapter->pci_write_immediate(adapter,
- adapter->legacy_intr.tgt_mask_reg, mask);
- else
- adapter->pci_write_normalize(adapter,
- CRB_INT_VECTOR, 0);
- }
+ if (!NETXEN_IS_MSI_FAMILY(adapter))
+ adapter->pci_write_immediate(adapter,
+ adapter->legacy_intr.tgt_mask_reg, 0xfbff);
}
static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
adapter->msix_entries[i].entry = i;
}
+static int
+netxen_read_mac_addr(struct netxen_adapter *adapter)
+{
+ int i;
+ unsigned char *p;
+ __le64 mac_addr;
+ DECLARE_MAC_BUF(mac);
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ if (netxen_is_flash_supported(adapter) != 0)
+ return -EIO;
+
+ if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
+ return -EIO;
+ } else {
+ if (netxen_get_flash_mac_addr(adapter, &mac_addr) != 0)
+ return -EIO;
+ }
+
+ p = (unsigned char *)&mac_addr;
+ for (i = 0; i < 6; i++)
+ netdev->dev_addr[i] = *(p + 5 - i);
+
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+ /* set station address */
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ dev_warn(&pdev->dev, "Bad MAC address %s.\n",
+ print_mac(mac, netdev->dev_addr));
+ } else
+ adapter->macaddr_set(adapter, netdev->dev_addr);
+
+ return 0;
+}
+
/*
* netxen_nic_probe()
*
unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
int i = 0, err;
int first_driver, first_boot;
- __le64 mac_addr[FLASH_NUM_PORTS + 1];
u32 val;
int pci_func_id = PCI_FUNC(pdev->devfn);
- DECLARE_MAC_BUF(mac);
struct netxen_legacy_intr_set *legacy_intrp;
uint8_t revision_id;
return -ENODEV;
}
+ if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
+ printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+ "will not be enabled.\n",
+ NX_P3_A0, NX_P3_B1);
+ return -ENODEV;
+ }
+
if ((err = pci_enable_device(pdev)))
return err;
goto err_out_disable_msi;
init_timer(&adapter->watchdog_timer);
- adapter->ahw.linkup = 0;
adapter->watchdog_timer.function = &netxen_watchdog;
adapter->watchdog_timer.data = (unsigned long)adapter;
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
- if (netxen_is_flash_supported(adapter) == 0 &&
- netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
- unsigned char *p;
-
- p = (unsigned char *)&mac_addr[adapter->portnum];
- netdev->dev_addr[0] = *(p + 5);
- netdev->dev_addr[1] = *(p + 4);
- netdev->dev_addr[2] = *(p + 3);
- netdev->dev_addr[3] = *(p + 2);
- netdev->dev_addr[4] = *(p + 1);
- netdev->dev_addr[5] = *(p + 0);
-
- memcpy(netdev->perm_addr, netdev->dev_addr,
- netdev->addr_len);
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- printk(KERN_ERR "%s: Bad MAC address %s.\n",
- netxen_nic_driver_name,
- print_mac(mac, netdev->dev_addr));
- } else {
- adapter->macaddr_set(adapter, netdev->dev_addr);
- }
- }
+ err = netxen_read_mac_addr(adapter);
+ if (err)
+ dev_warn(&pdev->dev, "failed to read mac addr\n");
netif_carrier_off(netdev);
netif_stop_queue(netdev);
if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
netxen_free_hw_resources(adapter);
+ netxen_release_rx_buffers(adapter);
netxen_free_sw_resources(adapter);
}
goto err_out_free_sw;
}
+ if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
+ (adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
+ printk(KERN_ERR "%s: Firmware interrupt scheme is "
+ "incompatible with driver\n",
+ netdev->name);
+ adapter->driver_mismatch = 1;
+ goto err_out_free_hw;
+ }
+
if (adapter->fw_major < 4) {
adapter->crb_addr_cmd_producer =
crb_cmd_producer[adapter->portnum];
flags, netdev->name, adapter);
if (err) {
printk(KERN_ERR "request_irq failed with: %d\n", err);
- goto err_out_free_hw;
+ goto err_out_free_rxbuf;
}
adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
if (adapter->set_mtu)
adapter->set_mtu(adapter, netdev->mtu);
+ adapter->ahw.linkup = 0;
mod_timer(&adapter->watchdog_timer, jiffies);
napi_enable(&adapter->napi);
err_out_free_irq:
free_irq(adapter->irq, adapter);
+err_out_free_rxbuf:
+ netxen_release_rx_buffers(adapter);
err_out_free_hw:
netxen_free_hw_resources(adapter);
err_out_free_sw:
netxen_release_tx_buffers(adapter);
- if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
- FLUSH_SCHEDULED_WORK();
- del_timer_sync(&adapter->watchdog_timer);
- }
+ FLUSH_SCHEDULED_WORK();
+ del_timer_sync(&adapter->watchdog_timer);
return 0;
}
netxen_nic_handle_phy_intr(adapter);
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+ if (netif_running(adapter->netdev))
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
}
static void netxen_tx_timeout(struct net_device *netdev)
return stats;
}
-static inline void
-netxen_handle_int(struct netxen_adapter *adapter)
-{
- netxen_nic_disable_int(adapter);
- napi_schedule(&adapter->napi);
-}
-
static irqreturn_t netxen_intr(int irq, void *data)
{
struct netxen_adapter *adapter = data;
- u32 our_int = 0;
-
u32 status = 0;
status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
if (!ISR_LEGACY_INT_TRIGGERED(status))
return IRQ_NONE;
- } else if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+ } else {
+ unsigned long our_int = 0;
our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+
/* not our interrupt */
- if ((our_int & (0x80 << adapter->portnum)) == 0)
+ if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
return IRQ_NONE;
- if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
- /* claim interrupt */
- adapter->pci_write_normalize(adapter,
- CRB_INT_VECTOR,
- our_int & ~((u32)(0x80 << adapter->portnum)));
- }
+ /* claim interrupt */
+ adapter->pci_write_normalize(adapter,
+ CRB_INT_VECTOR, (our_int & 0xffffffff));
}
- netxen_handle_int(adapter);
+ /* clear interrupt */
+ if (adapter->fw_major < 4)
+ netxen_nic_disable_int(adapter);
+
+ adapter->pci_write_immediate(adapter,
+ adapter->legacy_intr.tgt_status_reg,
+ 0xffffffff);
+ /* read twice to ensure write is flushed */
+ adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+ adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+ napi_schedule(&adapter->napi);
return IRQ_HANDLED;
}
{
struct netxen_adapter *adapter = data;
- netxen_handle_int(adapter);
+ /* clear interrupt */
+ adapter->pci_write_immediate(adapter,
+ msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+
+ napi_schedule(&adapter->napi);
return IRQ_HANDLED;
}
#define CRB_SW_INT_MASK_2 NETXEN_NIC_REG(0x1e4)
#define CRB_SW_INT_MASK_3 NETXEN_NIC_REG(0x1e8)
+#define CRB_MAC_BLOCK_START NETXEN_CAM_RAM(0x1c0)
+
/*
* capabilities register, can be used to selectively enable/disable features
* for backward compability
#include <linux/err.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/list.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/moduleparam.h>
#include <linux/string.h>
#include <linux/timer.h>
* the file called "COPYING".
*/
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/crc32.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/dma-mapping.h>
if (hw->chip_id != CHIP_ID_YUKON_EC) {
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
/* enable Power Down */
ctrl |= PHY_M_PC_POW_D_ENA;
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
}
/* set IEEE compatible Power Down Mode (dev. #4.99) */
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/if_vlan.h>
-#include <linux/version.h>
#include <linux/interrupt.h>
#include <linux/vmalloc.h>
#include <asm/byteorder.h>
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.93"
-#define DRV_MODULE_RELDATE "May 22, 2008"
+#define DRV_MODULE_VERSION "3.94"
+#define DRV_MODULE_RELDATE "August 14, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
return 0;
switch (locknum) {
+ case TG3_APE_LOCK_GRC:
case TG3_APE_LOCK_MEM:
break;
default:
return;
switch (locknum) {
+ case TG3_APE_LOCK_GRC:
case TG3_APE_LOCK_MEM:
break;
default:
}
}
+/* tp->lock is held. */
+static inline void tg3_generate_fw_event(struct tg3 *tp)
+{
+ u32 val;
+
+ val = tr32(GRC_RX_CPU_EVENT);
+ val |= GRC_RX_CPU_DRIVER_EVENT;
+ tw32_f(GRC_RX_CPU_EVENT, val);
+
+ tp->last_event_jiffies = jiffies;
+}
+
+#define TG3_FW_EVENT_TIMEOUT_USEC 2500
+
/* tp->lock is held. */
static void tg3_wait_for_event_ack(struct tg3 *tp)
{
int i;
+ unsigned int delay_cnt;
+ long time_remain;
+
+ /* If enough time has passed, no wait is necessary. */
+ time_remain = (long)(tp->last_event_jiffies + 1 +
+ usecs_to_jiffies(TG3_FW_EVENT_TIMEOUT_USEC)) -
+ (long)jiffies;
+ if (time_remain < 0)
+ return;
- /* Wait for up to 2.5 milliseconds */
- for (i = 0; i < 250000; i++) {
+ /* Check if we can shorten the wait time. */
+ delay_cnt = jiffies_to_usecs(time_remain);
+ if (delay_cnt > TG3_FW_EVENT_TIMEOUT_USEC)
+ delay_cnt = TG3_FW_EVENT_TIMEOUT_USEC;
+ delay_cnt = (delay_cnt >> 3) + 1;
+
+ for (i = 0; i < delay_cnt; i++) {
if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
break;
- udelay(10);
+ udelay(8);
}
}
val = 0;
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 12, val);
- val = tr32(GRC_RX_CPU_EVENT);
- val |= GRC_RX_CPU_DRIVER_EVENT;
- tw32_f(GRC_RX_CPU_EVENT, val);
+ tg3_generate_fw_event(tp);
}
static void tg3_link_report(struct tg3 *tp)
(tp->tg3_flags & TG3_FLAG_WOL_ENABLE))
mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ mac_mode |= tp->mac_mode &
+ (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+ if (mac_mode & MAC_MODE_APE_TX_EN)
+ mac_mode |= MAC_MODE_TDE_ENABLE;
+ }
+
tw32_f(MAC_MODE, mac_mode);
udelay(100);
return;
apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
- if (apedata != APE_FW_STATUS_READY)
+ if (!(apedata & APE_FW_STATUS_READY))
return;
/* Wait for up to 1 millisecond for APE to service previous event. */
tg3_mdio_stop(tp);
+ tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
+
/* No matching tg3_nvram_unlock() after this because
* chip reset below will undo the nvram lock.
*/
} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
tw32_f(MAC_MODE, tp->mac_mode);
+ } else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+ if (tp->mac_mode & MAC_MODE_APE_TX_EN)
+ tp->mac_mode |= MAC_MODE_TDE_ENABLE;
+ tw32_f(MAC_MODE, tp->mac_mode);
} else
tw32_f(MAC_MODE, 0);
udelay(40);
tg3_mdio_start(tp);
+ tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
+
err = tg3_poll_fw(tp);
if (err)
return err;
tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+ tp->last_event_jiffies = jiffies;
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
}
{
if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
!(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
- u32 val;
-
/* Wait for RX cpu to ACK the previous event. */
tg3_wait_for_event_ack(tp);
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
- val = tr32(GRC_RX_CPU_EVENT);
- val |= GRC_RX_CPU_DRIVER_EVENT;
- tw32(GRC_RX_CPU_EVENT, val);
+
+ tg3_generate_fw_event(tp);
/* Wait for RX cpu to ACK this event. */
tg3_wait_for_event_ack(tp);
udelay(10);
}
- tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+ else
+ tp->mac_mode = 0;
+ tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
* resets.
*/
if (!--tp->asf_counter) {
- if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
- u32 val;
-
+ if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+ !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
tg3_wait_for_event_ack(tp);
tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
/* 5 seconds timeout */
tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
- val = tr32(GRC_RX_CPU_EVENT);
- val |= GRC_RX_CPU_DRIVER_EVENT;
- tw32_f(GRC_RX_CPU_EVENT, val);
+
+ tg3_generate_fw_event(tp);
}
tp->asf_counter = tp->asf_multiplier;
}
return ret;
}
+static inline u64 get_estat64(tg3_stat64_t *val)
+{
+ return ((u64)val->high << 32) | ((u64)val->low);
+}
+
static unsigned long calc_crc_errors(struct tg3 *tp)
{
struct tg3_hw_stats *hw_stats = tp->hw_stats;
#define ESTAT_ADD(member) \
estats->member = old_estats->member + \
- get_stat64(&hw_stats->member)
+ get_estat64(&hw_stats->member)
static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
{
tp->misc_host_ctrl);
}
+ /* Preserve the APE MAC_MODE bits */
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+ tp->mac_mode = tr32(MAC_MODE) |
+ MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+ else
+ tp->mac_mode = TG3_DEF_MAC_MODE;
+
/* these are limited to 10/100 only */
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
(grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
tp->pdev = pdev;
tp->dev = dev;
tp->pm_cap = pm_cap;
- tp->mac_mode = TG3_DEF_MAC_MODE;
tp->rx_mode = TG3_DEF_RX_MODE;
tp->tx_mode = TG3_DEF_TX_MODE;
#define MAC_MODE_TDE_ENABLE 0x00200000
#define MAC_MODE_RDE_ENABLE 0x00400000
#define MAC_MODE_FHDE_ENABLE 0x00800000
+#define MAC_MODE_APE_RX_EN 0x08000000
+#define MAC_MODE_APE_TX_EN 0x10000000
#define MAC_STATUS 0x00000404
#define MAC_STATUS_PCS_SYNCED 0x00000001
#define MAC_STATUS_SIGNAL_DET 0x00000002
#define APE_EVENT_STATUS_EVENT_PENDING 0x80000000
/* APE convenience enumerations. */
+#define TG3_APE_LOCK_GRC 1
#define TG3_APE_LOCK_MEM 4
#define TG3_EEPROM_SB_F1R2_MBA_OFF 0x10
struct tg3_ethtool_stats estats;
struct tg3_ethtool_stats estats_prev;
+ union {
unsigned long phy_crc_errors;
+ unsigned long last_event_jiffies;
+ };
u32 rx_offset;
u32 tg3_flags;
{
unsigned long addr;
- addr = tag->buffer[8].address;
- addr |= (tag->buffer[9].address << 16) << 16;
+ addr = tag->buffer[9].address;
+ addr |= (tag->buffer[8].address << 16) << 16;
return (struct sk_buff *) addr;
}
TLanList *list;
dma_addr_t list_phys;
struct sk_buff *skb;
- void *t = NULL;
priv->txHead = 0;
priv->txTail = 0;
}
skb_reserve( skb, NET_IP_ALIGN );
- list->buffer[0].address = pci_map_single(priv->pciDev, t,
+ list->buffer[0].address = pci_map_single(priv->pciDev,
+ skb->data,
TLAN_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
TLan_StoreSKB(list, skb);
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
-#include <linux/version.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
*
*/
-#include <linux/version.h>
-
/* MAX_INTR - the maximum number of times we can loop
* inside the interrupt function before returning
* control to the OS (maximum value is 256)
return mask;
}
+/* prepad is the amount to reserve at front. len is length after that.
+ * linear is a hint as to how much to copy (usually headers). */
+static struct sk_buff *tun_alloc_skb(size_t prepad, size_t len, size_t linear,
+ gfp_t gfp)
+{
+ struct sk_buff *skb;
+ unsigned int i;
+
+ skb = alloc_skb(prepad + len, gfp|__GFP_NOWARN);
+ if (skb) {
+ skb_reserve(skb, prepad);
+ skb_put(skb, len);
+ return skb;
+ }
+
+ /* Under a page? Don't bother with paged skb. */
+ if (prepad + len < PAGE_SIZE)
+ return NULL;
+
+ /* Start with a normal skb, and add pages. */
+ skb = alloc_skb(prepad + linear, gfp);
+ if (!skb)
+ return NULL;
+
+ skb_reserve(skb, prepad);
+ skb_put(skb, linear);
+
+ len -= linear;
+
+ for (i = 0; i < MAX_SKB_FRAGS; i++) {
+ skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+
+ f->page = alloc_page(gfp|__GFP_ZERO);
+ if (!f->page)
+ break;
+
+ f->page_offset = 0;
+ f->size = PAGE_SIZE;
+
+ skb->data_len += PAGE_SIZE;
+ skb->len += PAGE_SIZE;
+ skb->truesize += PAGE_SIZE;
+ skb_shinfo(skb)->nr_frags++;
+
+ if (len < PAGE_SIZE) {
+ len = 0;
+ break;
+ }
+ len -= PAGE_SIZE;
+ }
+
+ /* Too large, or alloc fail? */
+ if (unlikely(len)) {
+ kfree_skb(skb);
+ skb = NULL;
+ }
+
+ return skb;
+}
+
/* Get packet from user space buffer */
static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, size_t count)
{
return -EINVAL;
}
- if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
+ if (!(skb = tun_alloc_skb(align, len, gso.hdr_len, GFP_KERNEL))) {
tun->dev->stats.rx_dropped++;
return -ENOMEM;
}
- if (align)
- skb_reserve(skb, align);
- if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+ if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
tun->dev->stats.rx_dropped++;
kfree_skb(skb);
return -EFAULT;
return err;
}
+static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+{
+ struct tun_struct *tun = file->private_data;
+
+ if (!tun)
+ return -EBADFD;
+
+ DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
+
+ strcpy(ifr->ifr_name, tun->dev->name);
+
+ ifr->ifr_flags = 0;
+
+ if (ifr->ifr_flags & TUN_TUN_DEV)
+ ifr->ifr_flags |= IFF_TUN;
+ else
+ ifr->ifr_flags |= IFF_TAP;
+
+ if (tun->flags & TUN_NO_PI)
+ ifr->ifr_flags |= IFF_NO_PI;
+
+ if (tun->flags & TUN_ONE_QUEUE)
+ ifr->ifr_flags |= IFF_ONE_QUEUE;
+
+ if (tun->flags & TUN_VNET_HDR)
+ ifr->ifr_flags |= IFF_VNET_HDR;
+
+ return 0;
+}
+
/* This is like a cut-down ethtool ops, except done via tun fd so no
* privs required. */
static int set_offload(struct net_device *dev, unsigned long arg)
DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
switch (cmd) {
+ case TUNGETIFF:
+ ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(argp, &ifr, sizeof(ifr)))
+ return -EFAULT;
+ break;
+
case TUNSETNOCSUM:
/* Disable/Enable checksum */
if (arg)
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/in6.h>
-#include <linux/version.h>
#include <linux/dma-mapping.h>
#include "typhoon.h"
This driver creates an interface named "ethX", where X depends on
what other networking devices you have in use.
-config USB_HSO
- tristate "Option USB High Speed Mobile Devices"
- depends on USB && RFKILL
- default n
- help
- Choose this option if you have an Option HSDPA/HSUPA card.
- These cards support downlink speeds of 7.2Mbps or greater.
-
- To compile this driver as a module, choose M here: the
- module will be called hso.
-
config USB_NET_CDCETHER
tristate "CDC Ethernet support (smart devices such as cable modems)"
depends on USB_USBNET
really need this non-conformant variant of CDC Ethernet (or in
some cases CDC MDLM) protocol, not "g_ether".
+config USB_HSO
+ tristate "Option USB High Speed Mobile Devices"
+ depends on USB && RFKILL
+ default n
+ help
+ Choose this option if you have an Option HSDPA/HSUPA card.
+ These cards support downlink speeds of 7.2Mbps or greater.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hso.
endmenu
#define MAX_RX_URBS 2
-#define get_serial_by_tty(x) \
- (x ? (struct hso_serial *)x->driver_data : NULL)
+static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
+{
+ if (tty)
+ return tty->driver_data;
+ return NULL;
+}
/*****************************************************************************/
/* Debugging functions */
/* #define DEBUG */
-#define dev2net(x) (x->port_data.dev_net)
-#define dev2ser(x) (x->port_data.dev_serial)
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+ return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+ return hso_dev->port_data.dev_serial;
+}
/* Debugging functions */
#ifdef DEBUG
static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
unsigned int len)
{
- u8 i = 0;
+ static char name[255];
- printk(KERN_DEBUG "[%d:%s]: len %d", line_count, func_name, len);
-
- for (i = 0; i < len; i++) {
- if (!(i % 16))
- printk("\n 0x%03x: ", i);
- printk("%02x ", (unsigned char)buf[i]);
- }
- printk("\n");
+ sprintf(name, "hso[%d:%s]", line_count, func_name);
+ print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
}
#define DUMP(buf_, len_) \
static struct hso_serial *get_serial_by_index(unsigned index)
{
- struct hso_serial *serial;
+ struct hso_serial *serial = NULL;
unsigned long flags;
- if (!serial_table[index])
- return NULL;
spin_lock_irqsave(&serial_table_lock, flags);
- serial = dev2ser(serial_table[index]);
+ if (serial_table[index])
+ serial = dev2ser(serial_table[index]);
spin_unlock_irqrestore(&serial_table_lock, flags);
return serial;
static void set_serial_by_index(unsigned index, struct hso_serial *serial)
{
unsigned long flags;
+
spin_lock_irqsave(&serial_table_lock, flags);
if (serial)
serial_table[index] = serial->parent;
spin_unlock_irqrestore(&serial_table_lock, flags);
}
-/* log a meaningfull explanation of an USB status */
+/* log a meaningful explanation of an USB status */
static void log_usb_status(int status, const char *function)
{
char *explanation;
/* reset the rts and dtr */
/* do the actual close */
serial->open_count--;
+ kref_put(&serial->parent->ref, hso_serial_ref_free);
if (serial->open_count <= 0) {
- kref_put(&serial->parent->ref, hso_serial_ref_free);
serial->open_count = 0;
if (serial->tty) {
serial->tty->driver_data = NULL;
return;
}
hso_put_activity(serial->parent);
- tty_wakeup(serial->tty);
+ if (serial->tty)
+ tty_wakeup(serial->tty);
hso_kick_transmit(serial);
D1(" ");
clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags);
} else {
hso_put_activity(serial->parent);
- tty_wakeup(serial->tty);
+ if (serial->tty)
+ tty_wakeup(serial->tty);
/* response to a write command */
hso_kick_transmit(serial);
}
hso_stop_net_device(network_table[i]);
cancel_work_sync(&network_table[i]->async_put_intf);
cancel_work_sync(&network_table[i]->async_get_intf);
- if(rfk)
+ if (rfk)
rfkill_unregister(rfk);
hso_free_net_device(network_table[i]);
}
}
/* operations setup of the serial interface */
-static struct tty_operations hso_serial_ops = {
+static const struct tty_operations hso_serial_ops = {
.open = hso_serial_open,
.close = hso_serial_close,
.write = hso_serial_write,
*
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/hardirq.h>
ath5k_stop_hw(sc);
free_irq(pdev->irq, sc);
- pci_disable_msi(pdev);
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
*/
pci_write_config_byte(pdev, 0x41, 0);
- pci_enable_msi(pdev);
-
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (err) {
ATH5K_ERR(sc, "request_irq failed\n");
- goto err_msi;
+ goto err_no_irq;
}
err = ath5k_init(sc);
return 0;
err_irq:
free_irq(pdev->irq, sc);
-err_msi:
- pci_disable_msi(pdev);
+err_no_irq:
pci_disable_device(pdev);
return err;
}
for (i = 0; i < 123; i++) {
if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
- if ((abs(cur_vit_mask - bin)) < 75)
+
+ /* workaround for gcc bug #37014 */
+ volatile int tmp = abs(cur_vit_mask - bin);
+
+ if (tmp < 75)
mask_amt = 1;
else
mask_amt = 0;
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
-#include <linux/version.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
if (bus->bustype == SSB_BUSTYPE_PCI) {
pdev = bus->host_pci;
if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, DELL, 0x0003) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
+ IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
}
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
-#include <linux/version.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include <linux/stringify.h>
#include <linux/tcp.h>
#include <linux/types.h>
-#include <linux/version.h>
#include <linux/time.h>
#include <linux/firmware.h>
#include <linux/acpi.h>
******************************************************************************/
#include "ipw2200.h"
-#include <linux/version.h>
#ifndef KBUILD_EXTMOD
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
s = iwl4965_get_sub_band(priv, channel);
if (s >= EEPROM_TX_POWER_BANDS) {
- IWL_ERROR("Tx Power can not find channel %d ", channel);
+ IWL_ERROR("Tx Power can not find channel %d\n", channel);
return -1;
}
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <net/mac80211.h>
struct iwl_priv; /* FIXME: remove */
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <net/mac80211.h>
{
u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
- IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+ IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
return -ENOENT;
}
return 0;
ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
if (ret < 0) {
- IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+ IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
ret = -ENOENT;
goto err;
}
}
if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
- IWL_ERROR("Time out reading EEPROM[%d]", addr);
+ IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
ret = -ETIMEDOUT;
goto done;
}
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <net/mac80211.h>
#include "iwl-dev.h" /* FIXME: remove */
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <net/mac80211.h>
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <net/mac80211.h>
case WLAN_HT_CAP_MIMO_PS_DISABLED:
break;
default:
- IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+ IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);
break;
}
return priv->hw_params.bcast_sta_id;
default:
- IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+ IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
return priv->hw_params.bcast_sta_id;
}
}
/* Alloc keep-warm buffer */
ret = iwl_kw_alloc(priv);
if (ret) {
- IWL_ERROR("Keep Warm allocation failed");
+ IWL_ERROR("Keep Warm allocation failed\n");
goto error_kw;
}
spin_lock_irqsave(&priv->lock, flags);
u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
if (scd_flow >= priv->hw_params.max_txq_num) {
- IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
+ IWL_ERROR("BUG_ON scd_flow is bigger than number of queues\n");
return;
}
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
- IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+ IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
return -ENOENT;
}
}
if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
- IWL_ERROR("Time out reading EEPROM[%d]", addr);
+ IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
return -ETIMEDOUT;
}
e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
return priv->hw_setting.bcast_sta_id;
default:
- IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+ IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
return priv->hw_setting.bcast_sta_id;
}
}
last_addr = range->end_addr;
__skb_unlink(entry, &priv->tx_queue);
memset(&info->status, 0, sizeof(info->status));
- priv->tx_stats[skb_get_queue_mapping(skb)].len--;
entry_hdr = (struct p54_control_hdr *) entry->data;
entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
pad = entry_data->align[0];
+ priv->tx_stats[entry_data->hw_queue - 4].len--;
if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
if (!(payload->status & 0x01))
info->flags |= IEEE80211_TX_STAT_ACK;
struct p54_tx_control_allocdata *txhdr;
size_t padding, len;
u8 rate;
+ u8 cts_rate = 0x20;
current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)];
if (unlikely(current_queue->len > current_queue->limit))
hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
hdr->retry1 = hdr->retry2 = info->control.retry_limit;
- memset(txhdr->wep_key, 0x0, 16);
- txhdr->padding = 0;
- txhdr->padding2 = 0;
-
/* TODO: add support for alternate retry TX rates */
rate = ieee80211_get_tx_rate(dev, info)->hw_value;
- if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+ if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
rate |= 0x10;
- if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+ cts_rate |= 0x10;
+ }
+ if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
rate |= 0x40;
- else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+ cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+ } else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
rate |= 0x20;
+ cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+ }
memset(txhdr->rateset, rate, 8);
- txhdr->wep_key_present = 0;
- txhdr->wep_key_len = 0;
- txhdr->frame_type = cpu_to_le32(skb_get_queue_mapping(skb) + 4);
- txhdr->magic4 = 0;
- txhdr->antenna = (info->antenna_sel_tx == 0) ?
+ txhdr->key_type = 0;
+ txhdr->key_len = 0;
+ txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+ txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
2 : info->antenna_sel_tx - 1;
txhdr->output_power = 0x7f; // HW Maximum
- txhdr->magic5 = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
- 0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23));
+ txhdr->cts_rate = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+ 0 : cts_rate;
if (padding)
txhdr->align[0] = padding;
struct p54_common *priv = dev->priv;
int err;
+ if (!priv->cached_vdcf) {
+ priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf)+
+ priv->tx_hdr_len + sizeof(struct p54_control_hdr),
+ GFP_KERNEL);
+
+ if (!priv->cached_vdcf)
+ return -ENOMEM;
+ }
+
err = priv->open(dev);
if (!err)
priv->mode = IEEE80211_IF_TYPE_MNTR;
+ p54_init_vdcf(dev);
+
return err;
}
dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
sizeof(struct p54_tx_control_allocdata);
- priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) +
- priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL);
-
- if (!priv->cached_vdcf) {
- ieee80211_free_hw(dev);
- return NULL;
- }
-
- p54_init_vdcf(dev);
mutex_init(&priv->conf_mutex);
return dev;
struct p54_tx_control_allocdata {
u8 rateset[8];
- u16 padding;
- u8 wep_key_present;
- u8 wep_key_len;
- u8 wep_key[16];
- __le32 frame_type;
- u32 padding2;
- __le16 magic4;
- u8 antenna;
+ u8 unalloc0[2];
+ u8 key_type;
+ u8 key_len;
+ u8 key[16];
+ u8 hw_queue;
+ u8 unalloc1[9];
+ u8 tx_antenna;
u8 output_power;
- __le32 magic5;
+ u8 cts_rate;
+ u8 unalloc2[3];
u8 align[0];
} __attribute__ ((packed));
urb->context = skb;
skb_queue_tail(&priv->rx_queue, skb);
} else {
+ if (!priv->hw_type)
+ skb_push(skb, sizeof(struct net2280_tx_hdr));
+
+ skb_reset_tail_pointer(skb);
skb_trim(skb, 0);
+ if (urb->transfer_buffer != skb_tail_pointer(skb)) {
+ /* this should not happen */
+ WARN_ON(1);
+ urb->transfer_buffer = skb_tail_pointer(skb);
+ }
+
skb_queue_tail(&priv->rx_queue, skb);
}
* frame transmission failed due to excessive retries.
*/
enum txdone_entry_desc_flags {
- TXDONE_UNKNOWN = 1 << 0,
- TXDONE_SUCCESS = 1 << 1,
- TXDONE_FAILURE = 1 << 2,
- TXDONE_EXCESSIVE_RETRY = 1 << 3,
+ TXDONE_UNKNOWN,
+ TXDONE_SUCCESS,
+ TXDONE_FAILURE,
+ TXDONE_EXCESSIVE_RETRY,
};
/**
* (Only indirectly by looking at the failed TX counters
* in the register).
*/
+ txdesc.flags = 0;
if (!urb->status)
__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
else
/* Netgear */
{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+ {USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
/* HP */
{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
/* Sitecom */
return sprintf(buf, "%s\n", ofdev->node->full_name);
}
+static ssize_t name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct of_device *ofdev;
+
+ ofdev = to_of_device(dev);
+ return sprintf(buf, "%s\n", ofdev->node->name);
+}
+
static ssize_t modalias_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct device_attribute of_platform_device_attrs[] = {
__ATTR_RO(devspec),
+ __ATTR_RO(name),
__ATTR_RO(modalias),
__ATTR_NULL
};
int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
{
acpi_status status;
- acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+ acpi_handle chandle, handle;
struct pci_dev *pdev = dev;
struct pci_bus *parent;
struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
* Per PCI firmware specification, we should run the ACPI _OSC
* method to get control of hotplug hardware before using it. If
* an _OSC is missing, we look for an OSHP to do the same thing.
- * To handle different BIOS behavior, we look for _OSC and OSHP
- * within the scope of the hotplug controller and its parents,
+ * To handle different BIOS behavior, we look for _OSC on a root
+ * bridge preferentially (according to PCI fw spec). Later for
+ * OSHP within the scope of the hotplug controller and its parents,
* upto the host bridge under which this controller exists.
*/
+ handle = acpi_find_root_bridge_handle(pdev);
+ if (handle) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+ dbg("Trying to get hotplug control for %s\n",
+ (char *)string.pointer);
+ status = pci_osc_control_set(handle, flags);
+ if (ACPI_SUCCESS(status))
+ goto got_one;
+ kfree(string.pointer);
+ string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
+ }
+
+ pdev = dev;
+ handle = DEVICE_ACPI_HANDLE(&dev->dev);
while (!handle) {
/*
* This hotplug controller was not listed in the ACPI name
acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
dbg("Trying to get hotplug control for %s \n",
(char *)string.pointer);
- status = pci_osc_control_set(handle, flags);
- if (status == AE_NOT_FOUND)
- status = acpi_run_oshp(handle);
- if (ACPI_SUCCESS(status)) {
- dbg("Gained control for hotplug HW for pci %s (%s)\n",
- pci_name(dev), (char *)string.pointer);
- kfree(string.pointer);
- return 0;
- }
+ status = acpi_run_oshp(handle);
+ if (ACPI_SUCCESS(status))
+ goto got_one;
if (acpi_root_bridge(handle))
break;
chandle = handle;
kfree(string.pointer);
return -ENODEV;
+got_one:
+ dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev),
+ (char *)string.pointer);
+ kfree(string.pointer);
+ return 0;
}
EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
if (acpi_pci_disabled)
return -1;
- /* Find root host bridge */
- while (pdev->bus->self)
- pdev = pdev->bus->self;
- handle = acpi_get_pci_rootbridge_handle(
- pci_domain_nr(pdev->bus), pdev->bus->number);
-
+ handle = acpi_find_root_bridge_handle(pdev);
if (handle) {
pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
status = pci_osc_control_set(handle,
res->start = base;
if (!res->end)
res->end = limit + 0xfff;
+ printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
}
res = child->resource[1];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
res->start = base;
res->end = limit + 0xfffff;
+ printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
}
res = child->resource[2];
res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
res->start = base;
res->end = limit + 0xfffff;
+ printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
}
}
}
EXPORT_SYMBOL(pci_bus_assign_resources);
+static void pci_bus_dump_res(struct pci_bus *bus)
+{
+ int i;
+
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+ struct resource *res = bus->resource[i];
+ if (!res)
+ continue;
+
+ printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+ }
+}
+
+static void pci_bus_dump_resources(struct pci_bus *bus)
+{
+ struct pci_bus *b;
+ struct pci_dev *dev;
+
+
+ pci_bus_dump_res(bus);
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ b = dev->subordinate;
+ if (!b)
+ continue;
+
+ pci_bus_dump_resources(b);
+ }
+}
+
void __init
pci_assign_unassigned_resources(void)
{
pci_bus_assign_resources(bus);
pci_enable_bridges(bus);
}
+
+ /* dump the resource on buses */
+ list_for_each_entry(bus, &pci_root_buses, node) {
+ pci_bus_dump_resources(bus);
+ }
}
static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY);
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
+ if (ret)
+ goto err5;
+
+ skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
return 0;
+
+err5:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+err4:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+err3:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+err2:
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
+err1:
+ return ret;
}
static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
+ gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
}
static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
platform_device_unregister(palmtx_pcmcia_device);
}
-fs_initcall(palmtx_pcmcia_init);
+module_init(palmtx_pcmcia_init);
module_exit(palmtx_pcmcia_exit);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
config RTC_DRV_BFIN
tristate "Blackfin On-Chip RTC"
- depends on BLACKFIN
+ depends on BLACKFIN && !BF561
help
If you say yes here you will get support for the
Blackfin On-Chip Real Time Clock.
return IRQ_NONE;
}
-static int bfin_rtc_open(struct device *dev)
-{
- int ret;
-
- dev_dbg_stamp(dev);
-
- ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
- if (!ret)
- bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
-
- return ret;
-}
-
-static void bfin_rtc_release(struct device *dev)
-{
- dev_dbg_stamp(dev);
- bfin_rtc_reset(dev, 0);
- free_irq(IRQ_RTC, dev);
-}
-
static void bfin_rtc_int_set(u16 rtc_int)
{
bfin_write_RTC_ISTAT(rtc_int);
}
static struct rtc_class_ops bfin_rtc_ops = {
- .open = bfin_rtc_open,
- .release = bfin_rtc_release,
.ioctl = bfin_rtc_ioctl,
.read_time = bfin_rtc_read_time,
.set_time = bfin_rtc_set_time,
static int __devinit bfin_rtc_probe(struct platform_device *pdev)
{
struct bfin_rtc *rtc;
+ struct device *dev = &pdev->dev;
int ret = 0;
+ unsigned long timeout;
- dev_dbg_stamp(&pdev->dev);
+ dev_dbg_stamp(dev);
+ /* Allocate memory for our RTC struct */
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
if (unlikely(!rtc))
return -ENOMEM;
+ platform_set_drvdata(pdev, rtc);
+ device_init_wakeup(dev, 1);
- rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc->rtc_dev);
+ /* Grab the IRQ and init the hardware */
+ ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
+ if (unlikely(ret))
goto err;
- }
-
- /* see comment at top of file about stopwatch/PIE */
+ /* sometimes the bootloader touched things, but the write complete was not
+ * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+ */
+ timeout = jiffies + HZ;
+ while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+ if (time_after(jiffies, timeout))
+ break;
+ bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
bfin_write_RTC_SWCNT(0);
- platform_set_drvdata(pdev, rtc);
-
- device_init_wakeup(&pdev->dev, 1);
+ /* Register our RTC with the RTC framework */
+ rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
+ if (unlikely(IS_ERR(rtc))) {
+ ret = PTR_ERR(rtc->rtc_dev);
+ goto err_irq;
+ }
return 0;
+ err_irq:
+ free_irq(IRQ_RTC, dev);
err:
kfree(rtc);
return ret;
static int __devexit bfin_rtc_remove(struct platform_device *pdev)
{
struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ bfin_rtc_reset(dev, 0);
+ free_irq(IRQ_RTC, dev);
rtc_device_unregister(rtc->rtc_dev);
platform_set_drvdata(pdev, NULL);
kfree(rtc);
#ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
case RTC_UIE_OFF:
+ mutex_unlock(&rtc->ops_lock);
clear_uie(rtc);
- break;
+ return 0;
case RTC_UIE_ON:
+ mutex_unlock(&rtc->ops_lock);
err = set_uie(rtc);
+ return err;
#endif
default:
err = -ENOTTY;
int cr, sr;
int ret = 0;
- if (client->irq < 0)
+ if (client->irq <= 0)
return -EINVAL;
mutex_lock(&ds1374->mutex);
int cr;
int ret = 0;
- if (client->irq < 0)
+ if (client->irq <= 0)
return -EINVAL;
ret = ds1374_read_time(dev, &now);
if (ret)
goto out_free;
- if (client->irq >= 0) {
+ if (client->irq > 0) {
ret = request_irq(client->irq, ds1374_irq, 0,
"ds1374", client);
if (ret) {
return 0;
out_irq:
- if (client->irq >= 0)
+ if (client->irq > 0)
free_irq(client->irq, client);
out_free:
{
struct ds1374 *ds1374 = i2c_get_clientdata(client);
- if (client->irq >= 0) {
+ if (client->irq > 0) {
mutex_lock(&ds1374->mutex);
ds1374->exiting = 1;
mutex_unlock(&ds1374->mutex);
*/
#include <linux/module.h>
-#include <linux/version.h>
-
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/device.h>
{
struct dasd_device *device;
struct dasd_ccw_req *cqr;
- unsigned long flags;
int ret;
- device = dasd_device_from_cdev(cdev);
+ device = dasd_device_from_cdev_locked(cdev);
if (IS_ERR(device))
return 0;
- spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
ret = 0;
switch (event) {
case CIO_GONE:
ret = 1;
break;
}
- spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
dasd_put_device(device);
return ret;
}
unsigned char flags;
unsigned char reserved[4];
unsigned char suborder;
- unsigned char varies[9];
+ unsigned char varies[5];
} __attribute__ ((packed));
/*
#include <linux/poll.h>
#include <linux/mutex.h>
#include <linux/smp_lock.h>
+#include <linux/err.h>
#include <asm/uaccess.h>
#include <asm/atomic.h>
cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
SNSS_DATA_SIZE, device);
- if (!cqr)
+ if (IS_ERR(cqr))
return -ENOMEM;
cqr->startdev = device;
* get minor, add to list
*/
down_write(&dcssblk_devices_sem);
+ if (dcssblk_get_segment_by_name(local_buf)) {
+ rc = -EEXIST;
+ goto release_gd;
+ }
rc = dcssblk_assign_free_minor(dev_info);
if (rc) {
up_write(&dcssblk_devices_sem);
/* The current idal buffer is not correct. Allocate a new one. */
new = idal_buffer_alloc(block_size, 0);
- if (new == NULL)
+ if (IS_ERR(new))
return -ENOMEM;
if (device->char_data.idal_buf != NULL)
/* Allocate a new idal buffer. */
new = idal_buffer_alloc(count, 0);
- if (new == NULL)
+ if (IS_ERR(new))
return -ENOMEM;
if (device->char_data.idal_buf != NULL)
idal_buffer_free(device->char_data.idal_buf);
gdev = to_ccwgroupdev(dev);
for (i = 0; i < gdev->count; i++) {
- dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
- put_device(&gdev->cdev[i]->dev);
+ if (gdev->cdev[i]) {
+ dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+ put_device(&gdev->cdev[i]->dev);
+ }
}
kfree(gdev);
}
atomic_set(&gdev->onoff, 0);
mutex_init(&gdev->reg_mutex);
mutex_lock(&gdev->reg_mutex);
+ gdev->creator_id = creator_id;
+ gdev->count = num_devices;
+ gdev->dev.bus = &ccwgroup_bus_type;
+ gdev->dev.parent = root;
+ gdev->dev.release = ccwgroup_release;
+ device_initialize(&gdev->dev);
+
curr_buf = buf;
for (i = 0; i < num_devices && curr_buf; i++) {
rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
rc = -EINVAL;
goto error;
}
- gdev->creator_id = creator_id;
- gdev->count = num_devices;
- gdev->dev.bus = &ccwgroup_bus_type;
- gdev->dev.parent = root;
- gdev->dev.release = ccwgroup_release;
snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
gdev->cdev[0]->dev.bus_id);
- rc = device_register(&gdev->dev);
+ rc = device_add(&gdev->dev);
if (rc)
goto error;
get_device(&gdev->dev);
void css_wait_for_slow_path(void)
{
- flush_workqueue(ccw_device_notify_work);
flush_workqueue(slow_path_wq);
}
};
struct workqueue_struct *ccw_device_work;
-struct workqueue_struct *ccw_device_notify_work;
wait_queue_head_t ccw_device_init_wq;
atomic_t ccw_device_init_count;
ccw_device_work = create_singlethread_workqueue("cio");
if (!ccw_device_work)
return -ENOMEM; /* FIXME: better errno ? */
- ccw_device_notify_work = create_singlethread_workqueue("cio_notify");
- if (!ccw_device_notify_work) {
- ret = -ENOMEM; /* FIXME: better errno ? */
- goto out_err;
- }
slow_path_wq = create_singlethread_workqueue("kslowcrw");
if (!slow_path_wq) {
ret = -ENOMEM; /* FIXME: better errno ? */
out_err:
if (ccw_device_work)
destroy_workqueue(ccw_device_work);
- if (ccw_device_notify_work)
- destroy_workqueue(ccw_device_notify_work);
if (slow_path_wq)
destroy_workqueue(slow_path_wq);
return ret;
{
css_driver_unregister(&io_subchannel_driver);
bus_unregister(&ccw_bus_type);
- destroy_workqueue(ccw_device_notify_work);
destroy_workqueue(ccw_device_work);
}
ccw_device_schedule_recovery();
}
+void ccw_device_set_notoper(struct ccw_device *cdev)
+{
+ struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+ CIO_TRACE_EVENT(2, "notoper");
+ CIO_TRACE_EVENT(2, sch->dev.bus_id);
+ ccw_device_set_timeout(cdev, 0);
+ cio_disable_subchannel(sch);
+ cdev->private->state = DEV_STATE_NOT_OPER;
+}
+
static int io_subchannel_sch_event(struct subchannel *sch, int slow)
{
int event, ret, disc;
unsigned long flags;
- enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
+ enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
struct ccw_device *cdev;
spin_lock_irqsave(sch->lock, flags);
}
/* fall through */
case CIO_GONE:
- /* Prevent unwanted effects when opening lock. */
- cio_disable_subchannel(sch);
- device_set_disconnected(cdev);
/* Ask driver what to do with device. */
- action = UNREGISTER;
- spin_unlock_irqrestore(sch->lock, flags);
- ret = io_subchannel_notify(sch, event);
- spin_lock_irqsave(sch->lock, flags);
- if (ret)
- action = NONE;
+ if (io_subchannel_notify(sch, event))
+ action = DISC;
+ else
+ action = UNREGISTER;
break;
case CIO_REVALIDATE:
/* Device will be removed, so no notify necessary. */
switch (action) {
case UNREGISTER:
case UNREGISTER_PROBE:
+ ccw_device_set_notoper(cdev);
/* Unregister device (will use subchannel lock). */
spin_unlock_irqrestore(sch->lock, flags);
css_sch_device_unregister(sch);
case REPROBE:
ccw_device_trigger_reprobe(cdev);
break;
+ case DISC:
+ device_set_disconnected(cdev);
+ break;
default:
break;
}
EXPORT_SYMBOL(get_ccwdev_by_busid);
EXPORT_SYMBOL(ccw_bus_type);
EXPORT_SYMBOL(ccw_device_work);
-EXPORT_SYMBOL(ccw_device_notify_work);
EXPORT_SYMBOL_GPL(ccw_device_get_subchannel_id);
}
extern struct workqueue_struct *ccw_device_work;
-extern struct workqueue_struct *ccw_device_notify_work;
extern wait_queue_head_t ccw_device_init_wq;
extern atomic_t ccw_device_init_count;
void ccw_device_trigger_reprobe(struct ccw_device *);
void ccw_device_kill_io(struct ccw_device *);
int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_notoper(struct ccw_device *cdev);
/* qdio needs this. */
void ccw_device_set_timeout(struct ccw_device *, int);
return 0;
if (!cdev->online)
return 0;
+ CIO_MSG_EVENT(2, "notify called for 0.%x.%04x, event=%d\n",
+ cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+ event);
return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
}
-static void
-ccw_device_oper_notify(struct work_struct *work)
+static void cmf_reenable_delayed(struct work_struct *work)
{
struct ccw_device_private *priv;
struct ccw_device *cdev;
- int ret;
priv = container_of(work, struct ccw_device_private, kick_work);
cdev = priv->cdev;
- ret = ccw_device_notify(cdev, CIO_OPER);
- if (ret) {
+ cmf_reenable(cdev);
+}
+
+static void ccw_device_oper_notify(struct ccw_device *cdev)
+{
+ if (ccw_device_notify(cdev, CIO_OPER)) {
/* Reenable channel measurements, if needed. */
- cmf_reenable(cdev);
- wake_up(&cdev->private->wait_q);
- } else
- /* Driver doesn't want device back. */
- ccw_device_do_unreg_rereg(work);
+ PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
+ return;
+ }
+ /* Driver doesn't want device back. */
+ ccw_device_set_notoper(cdev);
+ PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unreg_rereg);
+ queue_work(ccw_device_work, &cdev->private->kick_work);
}
/*
if (cdev->private->flags.donotify) {
cdev->private->flags.donotify = 0;
- PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
- queue_work(ccw_device_notify_work, &cdev->private->kick_work);
+ ccw_device_oper_notify(cdev);
}
wake_up(&cdev->private->wait_q);
/* s390dbf views */
#define QDIO_DBF_SETUP_LEN 8
-#define QDIO_DBF_SETUP_PAGES 4
+#define QDIO_DBF_SETUP_PAGES 8
#define QDIO_DBF_SETUP_NR_AREAS 1
#define QDIO_DBF_TRACE_LEN 8
#define QDIO_DBF_TRACE_NR_AREAS 2
#ifdef CONFIG_QDIO_DEBUG
-#define QDIO_DBF_TRACE_PAGES 16
+#define QDIO_DBF_TRACE_PAGES 32
#define QDIO_DBF_SETUP_LEVEL 6
#define QDIO_DBF_TRACE_LEVEL 4
#else /* !CONFIG_QDIO_DEBUG */
-#define QDIO_DBF_TRACE_PAGES 4
+#define QDIO_DBF_TRACE_PAGES 8
#define QDIO_DBF_SETUP_LEVEL 2
#define QDIO_DBF_TRACE_LEVEL 2
#endif /* CONFIG_QDIO_DEBUG */
int cc;
u32 busy_bit;
u64 start_time = 0;
+ char dbf_text[15];
QDIO_DBF_TEXT5(0, trace, "sigaout");
QDIO_DBF_HEX5(0, trace, &q, sizeof(void *));
again:
cc = qdio_do_siga_output(q, &busy_bit);
if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) {
+ sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr);
+ QDIO_DBF_TEXT3(0, trace, dbf_text);
+
if (!start_time)
start_time = get_usecs();
else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
rc = qdio_siga_output(q);
switch (rc) {
case 0:
- /* went smooth this time, reset timestamp */
- q->u.out.timestamp = 0;
-
/* TODO: improve error handling for CC=0 case */
#ifdef CONFIG_QDIO_DEBUG
- QDIO_DBF_TEXT3(0, trace, "cc2reslv");
- sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr,
- atomic_read(&q->u.out.busy_siga_counter));
- QDIO_DBF_TEXT3(0, trace, dbf_text);
+ if (q->u.out.timestamp) {
+ QDIO_DBF_TEXT3(0, trace, "cc2reslv");
+ sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no,
+ q->nr,
+ atomic_read(&q->u.out.busy_siga_counter));
+ QDIO_DBF_TEXT3(0, trace, dbf_text);
+ }
#endif /* CONFIG_QDIO_DEBUG */
+ /* went smooth this time, reset timestamp */
+ q->u.out.timestamp = 0;
break;
/* cc=2 and busy bit */
case (2 | QDIO_ERROR_SIGA_BUSY):
if (IS_ERR(irb)) {
switch (PTR_ERR(irb)) {
case -EIO:
- sprintf(dbf_text, "ierr%4x",
- cdev->private->schid.sch_no);
+ sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(1, setup, dbf_text);
qdio_int_error(cdev);
return;
case -ETIMEDOUT:
- sprintf(dbf_text, "qtoh%4x",
- cdev->private->schid.sch_no);
+ sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(1, setup, dbf_text);
qdio_int_error(cdev);
return;
struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev)
{
struct qdio_irq *irq_ptr;
+ char dbf_text[15];
- QDIO_DBF_TEXT0(0, setup, "getssqd");
+ sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
char dbf_text[15];
int rc;
+ sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
- sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
rc = qdio_shutdown(cdev, how);
if (rc == 0)
rc = qdio_free(cdev);
unsigned long flags;
char dbf_text[15];
+ sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
return 0;
}
- sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
tiqdio_remove_input_queues(irq_ptr);
qdio_shutdown_queues(cdev);
qdio_shutdown_debug_entries(irq_ptr, cdev);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
mutex_unlock(&irq_ptr->setup_mutex);
- module_put(THIS_MODULE);
if (rc)
return rc;
return 0;
struct qdio_irq *irq_ptr;
char dbf_text[15];
+ sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
mutex_lock(&irq_ptr->setup_mutex);
-
- sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT1(0, trace, dbf_text);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
-
cdev->private->qdio_data = NULL;
mutex_unlock(&irq_ptr->setup_mutex);
sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
rc = qdio_allocate(init_data);
if (rc)
sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
if ((init_data->no_input_qs && !init_data->input_handler) ||
(init_data->no_output_qs && !init_data->output_handler))
unsigned long saveflags;
int rc;
+ sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
if (cdev->private->state != DEV_STATE_ONLINE)
return -EINVAL;
- if (!try_module_get(THIS_MODULE))
- return -EINVAL;
-
- sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
- QDIO_DBF_TEXT0(0, setup, dbf_text);
- QDIO_DBF_TEXT0(0, trace, dbf_text);
-
mutex_lock(&irq_ptr->setup_mutex);
qdio_setup_irq(init_data);
unsigned long saveflags;
char dbf_text[20];
+ sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no);
+ QDIO_DBF_TEXT0(0, setup, dbf_text);
+
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
goto out;
}
- sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no);
- QDIO_DBF_TEXT2(0, setup, dbf_text);
- QDIO_DBF_TEXT2(0, trace, dbf_text);
-
irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
irq_ptr->ccw.flags = CCW_FLAG_SLI;
irq_ptr->ccw.count = irq_ptr->aqueue.count;
#ifdef CONFIG_QDIO_DEBUG
char dbf_text[20];
- sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no);
+ sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no);
QDIO_DBF_TEXT3(0, trace, dbf_text);
#endif /* CONFIG_QDIO_DEBUG */
void **output_sbal_array = qdio_init->output_sbal_addr_array;
int i;
- sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no);
+ sprintf(dbf_text, "qset%4x", qdio_init->cdev->private->schid.sch_no);
QDIO_DBF_TEXT0(0, setup, dbf_text);
for_each_input_queue(irq_ptr, q, i) {
rc = __get_ssqd_info(irq_ptr);
if (rc) {
QDIO_DBF_TEXT2(0, setup, "ssqdasig");
- sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no);
+ sprintf(dbf_text, "schn%4x", irq_ptr->schid.sch_no);
QDIO_DBF_TEXT2(0, setup, dbf_text);
sprintf(dbf_text, "rc:%d", rc);
QDIO_DBF_TEXT2(0, setup, dbf_text);
{
char s[80];
- sprintf(s, "%s ", cdev->dev.bus_id);
+ sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
switch (irq_ptr->qib.qfmt) {
case QDIO_QETH_QFMT:
struct qdio_q *q;
int i;
- for_each_input_queue(irq_ptr, q, i) {
+ for (i = 0; i < irq_ptr->nr_input_qs; i++) {
+ q = irq_ptr->input_qs[i];
+ /* if establish triggered an error */
+ if (!q || !q->entry.prev || !q->entry.next)
+ continue;
list_del_rcu(&q->entry);
synchronize_rcu();
}
#undef DEBUGDATA
#undef DEBUGCCW
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
return SCSI_DH_NOSYS;
- h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
+ h->lun = inqp->lun[7]; /* Uses only the last byte */
}
return err;
}
int err;
struct c9_inquiry *inqp;
+ h->lun_state = RDAC_LUN_UNOWNED;
err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
if (err == SCSI_DH_OK) {
inqp = &h->inq.c9;
#include <linux/i2o-dev.h>
-#include <linux/version.h>
#include <linux/notifier.h>
#include <asm/atomic.h>
/**
* ibmvfc_init_host - Start host initialization
* @vhost: ibmvfc host struct
+ * @relogin: is this a re-login?
*
* Return value:
* nothing
**/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
{
struct ibmvfc_target *tgt;
}
if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+ if (!relogin) {
+ memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+ vhost->async_crq.cur = 0;
+ }
+
list_for_each_entry(tgt, &vhost->targets, queue)
tgt->need_login = 1;
scsi_block_requests(vhost->host);
static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
{
long timeout = wait_event_timeout(vhost->init_wait_q,
- (vhost->state == IBMVFC_ACTIVE ||
- vhost->state == IBMVFC_HOST_OFFLINE ||
- vhost->state == IBMVFC_LINK_DEAD),
+ ((vhost->state == IBMVFC_ACTIVE ||
+ vhost->state == IBMVFC_HOST_OFFLINE ||
+ vhost->state == IBMVFC_LINK_DEAD) &&
+ vhost->action == IBMVFC_HOST_ACTION_NONE),
(init_timeout * HZ));
return timeout ? 0 : -EIO;
struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
struct scsi_cmnd *cmnd = evt->cmnd;
- int rsp_len = 0;
- int sense_len = rsp->fcp_sense_len;
+ u32 rsp_len = 0;
+ u32 sense_len = rsp->fcp_sense_len;
if (cmnd) {
if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
rsp_len = rsp->fcp_rsp_len;
if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
- if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
+ if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
ibmvfc_log_error(evt);
{
const char *desc = ibmvfc_get_ae_desc(crq->event);
- ibmvfc_log(vhost, 3, "%s event received\n", desc);
+ ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
+ " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
switch (crq->event) {
case IBMVFC_AE_LINK_UP:
case IBMVFC_AE_RESUME:
vhost->events_to_log |= IBMVFC_AE_LINKUP;
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_FABRIC:
vhost->events_to_log |= IBMVFC_AE_RSCN;
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 1);
break;
case IBMVFC_AE_SCN_NPORT:
case IBMVFC_AE_SCN_GROUP:
/* Send back a response */
rc = ibmvfc_send_crq_init_complete(vhost);
if (rc == 0)
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 0);
else
dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
break;
case IBMVFC_CRQ_INIT_COMPLETE:
dev_info(vhost->dev, "Partner initialization complete\n");
- ibmvfc_init_host(vhost);
+ ibmvfc_init_host(vhost, 0);
break;
default:
dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
mad->buffer.va = vhost->login_buf_dma;
mad->buffer.len = sizeof(*vhost->login_buf);
- memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
- vhost->async_crq.cur = 0;
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
if (!ibmvfc_send_event(evt, vhost, default_timeout))
}
}
- if (vhost->reinit) {
+ if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
vhost->reinit = 0;
+ scsi_block_requests(vhost->host);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
} else {
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
-#define IBMVFC_DRIVER_VERSION "1.0.1"
-#define IBMVFC_DRIVER_DATE "(July 11, 2008)"
+#define IBMVFC_DRIVER_VERSION "1.0.2"
+#define IBMVFC_DRIVER_DATE "(August 14, 2008)"
#define IBMVFC_DEFAULT_TIMEOUT 15
#define IBMVFC_INIT_TIMEOUT 30
unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
/* add io space for sg data */
- desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+ desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
IBMVSCSI_CMDS_PER_LUN_DEFAULT);
return desired_io;
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/stddef.h>
-#include <linux/version.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#ifndef _IPS_H_
#define _IPS_H_
-#include <linux/version.h>
#include <linux/nmi.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
-#include <linux/version.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.20-rc1
+ * Version : v00.00.04.01-rc1
*
* Authors:
* (email-id : megaraidlinux@lsi.com)
/* ppc IOP */
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
/* ppc IOP */
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+ /* gen2*/
+ {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+ /* gen2*/
{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
/* xscale IOP, vega */
{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
*/
writel(status, ®s->outbound_intr_status);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
return 0;
}
*/
writel(status, ®s->outbound_doorbell_clear);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_doorbell_clear);
+
return 0;
}
/**
.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
};
+/**
+* The following functions are defined for gen2 (deviceid : 0x78 0x79)
+* controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 - Enables interrupts
+ * @regs: MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+ /* write ~0x00000005 (4 & 1) to the intr mask*/
+ writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs: MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 mask = 0xFFFFFFFF;
+ writel(mask, ®s->outbound_intr_mask);
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs: MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+ return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 - Check & clear interrupt
+ * @regs: MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+ u32 status;
+ /*
+ * Check if it is our interrupt
+ */
+ status = readl(®s->outbound_intr_status);
+
+ if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+ return 1;
+
+ /*
+ * Clear the interrupt by writing back the same value
+ */
+ writel(status, ®s->outbound_doorbell_clear);
+
+ /* Dummy readl to force pci flush */
+ readl(®s->outbound_intr_status);
+
+ return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 - Sends command to the FW
+ * @frame_phys_addr : Physical address of cmd
+ * @frame_count : Number of frames for the command
+ * @regs : MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+ struct megasas_register_set __iomem *regs)
+{
+ writel((frame_phys_addr | (frame_count<<1))|1,
+ &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+ .fire_cmd = megasas_fire_cmd_gen2,
+ .enable_intr = megasas_enable_intr_gen2,
+ .disable_intr = megasas_disable_intr_gen2,
+ .clear_intr = megasas_clear_intr_gen2,
+ .read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
/**
* This is the end of set of functions & definitions
* specific to ppc (deviceid : 0x60) controllers
/*
* Map the message registers
*/
- instance->base_addr = pci_resource_start(instance->pdev, 0);
+ if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+ (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+ instance->base_addr = pci_resource_start(instance->pdev, 1);
+ } else {
+ instance->base_addr = pci_resource_start(instance->pdev, 0);
+ }
if (pci_request_regions(instance->pdev, "megasas: LSI")) {
printk(KERN_DEBUG "megasas: IO memory region busy!\n");
case PCI_DEVICE_ID_LSI_SAS1078DE:
instance->instancet = &megasas_instance_template_ppc;
break;
+ case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+ case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+ instance->instancet = &megasas_instance_template_gen2;
+ break;
case PCI_DEVICE_ID_LSI_SAS1064R:
case PCI_DEVICE_ID_DELL_PERC5:
default:
{
struct megasas_instance *instance = pci_get_drvdata(pdev);
megasas_flush_cache(instance);
+ megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
}
/**
return retval;
}
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
megasas_sysfs_set_dbg_lvl);
static ssize_t
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.03.20-rc1"
-#define MEGASAS_RELDATE "March 10, 2008"
-#define MEGASAS_EXT_VERSION "Mon. March 10 11:02:31 PDT 2008"
+#define MEGASAS_VERSION "00.00.04.01"
+#define MEGASAS_RELDATE "July 24, 2008"
+#define MEGASAS_EXT_VERSION "Thu July 24 11:41:51 PST 2008"
/*
* Device IDs
#define PCI_DEVICE_ID_LSI_SAS1078R 0x0060
#define PCI_DEVICE_ID_LSI_SAS1078DE 0x007C
#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413
+#define PCI_DEVICE_ID_LSI_SAS1078GEN2 0x0078
+#define PCI_DEVICE_ID_LSI_SAS0079GEN2 0x0079
/*
* =====================================
#define MEGASAS_COMPLETION_TIMER_INTERVAL (HZ/10)
#define MFI_REPLY_1078_MESSAGE_INTERRUPT 0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT 0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK (0x00000001 | 0x00000004)
/*
* register set for both 1068 and 1078 controllers
* 1.2: PowerPC (big endian) support.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#ifndef _NSP32_H
#define _NSP32_H
-#include <linux/version.h>
//#define NSP32_DEBUG 9
/*
***********************************************************************/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
{
fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
+ /*
+ * At this point all fcport's software-states are cleared. Perform any
+ * final cleanup of firmware resources (PCBs and XCBs).
+ */
+ if (fcport->loop_id != FC_NO_LOOP_ID) {
+ fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ fcport->loop_id = FC_NO_LOOP_ID;
+ }
+
qla2x00_abort_fcport_cmds(fcport);
scsi_target_unblock(&rport->dev);
}
#define REGISTER_FDMI_NEEDED 26
#define FCPORT_UPDATE_NEEDED 27
#define VP_DPC_NEEDED 28 /* wake up for VP dpc handling */
+#define UNLOADING 29
uint32_t device_flags;
#define DFLG_LOCAL_DEVICES BIT_0
&ha->fw_attributes, &ha->fw_memory_size);
qla2x00_resize_request_q(ha);
ha->flags.npiv_supported = 0;
- if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
- (ha->fw_attributes & BIT_2)) {
+ if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
+ IS_QLA84XX(ha)) &&
+ (ha->fw_attributes & BIT_2)) {
ha->flags.npiv_supported = 1;
if ((!ha->max_npiv_vports) ||
((ha->max_npiv_vports + 1) %
{
int rval;
uint8_t status = 0;
+ scsi_qla_host_t *vha;
if (ha->flags.online) {
ha->flags.online = 0;
if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
atomic_set(&ha->loop_state, LOOP_DOWN);
qla2x00_mark_all_devices_lost(ha, 0);
+ list_for_each_entry(vha, &ha->vp_list, vp_list)
+ qla2x00_mark_all_devices_lost(vha, 0);
} else {
if (!atomic_read(&ha->loop_down_timer))
atomic_set(&ha->loop_down_timer,
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
- sp->ha->status_srb = sp;
+ sp->fcport->ha->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
- "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
- cp->device->id, cp->device->lun, cp, cp->serial_number));
+ "cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
+ cp->device->channel, cp->device->id, cp->device->lun, cp,
+ cp->serial_number));
if (sense_len)
DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
CMD_ACTUAL_SNSLEN(cp)));
atomic_read(&fcport->state)));
cp->result = DID_BUS_BUSY << 16;
- if (atomic_read(&fcport->state) == FCS_ONLINE) {
- qla2x00_mark_device_lost(ha, fcport, 1, 1);
- }
+ if (atomic_read(&fcport->state) == FCS_ONLINE)
+ qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
case CS_RESET:
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
- qla2x00_mark_device_lost(ha, fcport, 1, 1);
+ qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
break;
default:
set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
- wake_up_process(ha->dpc_thread);
+ qla2xxx_wake_dpc(ha);
}
}
*/
#include "qla_def.h"
-#include <linux/version.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
#include <linux/smp_lock.h>
sp = pha->outstanding_cmds[cnt];
if (!sp)
continue;
- if (ha->vp_idx != sp->ha->vp_idx)
+
+ if (ha->vp_idx != sp->fcport->ha->vp_idx)
continue;
match = 0;
switch (type) {
sp = ha->outstanding_cmds[cnt];
if (sp) {
ha->outstanding_cmds[cnt] = NULL;
- sp->flags = 0;
sp->cmd->result = res;
- sp->cmd->host_scribble = (unsigned char *)NULL;
qla2x00_sp_compl(ha, sp);
}
}
static void
qla2x00_remove_one(struct pci_dev *pdev)
{
- scsi_qla_host_t *ha;
+ scsi_qla_host_t *ha, *vha, *temp;
ha = pci_get_drvdata(pdev);
+ list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
+ fc_vport_terminate(vha->fc_vport);
+
+ set_bit(UNLOADING, &ha->dpc_flags);
+
qla2x00_dfs_remove(ha);
qla84xx_put_chip(ha);
void
qla2xxx_wake_dpc(scsi_qla_host_t *ha)
{
- if (ha->dpc_thread)
- wake_up_process(ha->dpc_thread);
+ struct task_struct *t = ha->dpc_thread;
+
+ if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
+ wake_up_process(t);
}
/*
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k6"
+#define QLA2XXX_VERSION "8.02.01-k7"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on ARM && PLAT_S3C24XX
+ select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
* Companion function to spi_alloc_device. Devices allocated with
* spi_alloc_device can be added onto the spi bus with this function.
*
- * Returns 0 on success; non-zero on failure
+ * Returns 0 on success; negative errno on failure
*/
int spi_add_device(struct spi_device *spi)
{
+ static DEFINE_MUTEX(spi_add_lock);
struct device *dev = spi->master->dev.parent;
int status;
"%s.%u", spi->master->dev.bus_id,
spi->chip_select);
- /* drivers may modify this initial i/o setup */
+
+ /* We need to make sure there's no other device with this
+ * chipselect **BEFORE** we call setup(), else we'll trash
+ * its configuration. Lock against concurrent add() calls.
+ */
+ mutex_lock(&spi_add_lock);
+
+ if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id)
+ != NULL) {
+ dev_err(dev, "chipselect %d already in use\n",
+ spi->chip_select);
+ status = -EBUSY;
+ goto done;
+ }
+
+ /* Drivers may modify this initial i/o setup, but will
+ * normally rely on the device being setup. Devices
+ * using SPI_CS_HIGH can't coexist well otherwise...
+ */
status = spi->master->setup(spi);
if (status < 0) {
dev_err(dev, "can't %s %s, status %d\n",
"setup", spi->dev.bus_id, status);
- return status;
+ goto done;
}
- /* driver core catches callers that misbehave by defining
- * devices that already exist.
- */
+ /* Device may be bound to an active driver when this returns */
status = device_add(&spi->dev);
- if (status < 0) {
+ if (status < 0)
dev_err(dev, "can't %s %s, status %d\n",
"add", spi->dev.bus_id, status);
- return status;
- }
+ else
+ dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
- dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
- return 0;
+done:
+ mutex_unlock(&spi_add_lock);
+ return status;
}
EXPORT_SYMBOL_GPL(spi_add_device);
int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
{
+#ifdef CONFIG_SSB_PCIHOST
int err;
+#endif
switch (dev->bus->bustype) {
case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
err = pci_set_dma_mask(dev->bus->host_pci, mask);
if (err)
return err;
err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
return err;
+#endif
case SSB_BUSTYPE_SSB:
return dma_set_mask(dev->dev, mask);
default:
{
switch (dev->bus->bustype) {
case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
if (gfp_flags & GFP_DMA) {
/* Workaround: The PCI API does not support passing
* a GFP flag. */
size, dma_handle, gfp_flags);
}
return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+#endif
case SSB_BUSTYPE_SSB:
return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
default:
{
switch (dev->bus->bustype) {
case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
if (gfp_flags & GFP_DMA) {
/* Workaround: The PCI API does not support passing
* a GFP flag. */
pci_free_consistent(dev->bus->host_pci, size,
vaddr, dma_handle);
return;
+#endif
case SSB_BUSTYPE_SSB:
dma_free_coherent(dev->dev, size, vaddr, dma_handle);
return;
If you don't know what to do here, say N.
+config UIO_PDRV_GENIRQ
+ tristate "Userspace I/O platform driver with generic IRQ handling"
+ help
+ Platform driver for Userspace I/O devices, including generic
+ interrupt handling code. Shared interrupts are not supported.
+
+ This kernel driver requires that the matching userspace driver
+ handles interrupts in a special way. Userspace is responsible
+ for acknowledging the hardware device if needed, and re-enabling
+ interrupts in the interrupt controller using the write() syscall.
+
+ If you don't know what to do here, say N.
+
config UIO_SMX
tristate "SMX cryptengine UIO interface"
default n
obj-$(CONFIG_UIO) += uio.o
obj-$(CONFIG_UIO_CIF) += uio_cif.o
obj-$(CONFIG_UIO_PDRV) += uio_pdrv.o
+obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
obj-$(CONFIG_UIO_SMX) += uio_smx.o
uio_unregister_device(pdata->uioinfo);
+ kfree(pdata);
+
return 0;
}
MODULE_AUTHOR("Uwe Kleine-Koenig");
MODULE_DESCRIPTION("Userspace I/O platform driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" DRIVER_NAME);
--- /dev/null
+/*
+ * drivers/uio/uio_pdrv_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on uio_pdrv.c by Uwe Kleine-Koenig,
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio_pdrv_genirq"
+
+struct uio_pdrv_genirq_platdata {
+ struct uio_info *uioinfo;
+ spinlock_t lock;
+ unsigned long flags;
+};
+
+static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
+{
+ struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+
+ /* Just disable the interrupt in the interrupt controller, and
+ * remember the state so we can allow user space to enable it later.
+ */
+
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq_nosync(irq);
+
+ return IRQ_HANDLED;
+}
+
+static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+ struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+ unsigned long flags;
+
+ /* Allow user space to enable and disable the interrupt
+ * in the interrupt controller, but keep track of the
+ * state to prevent per-irq depth damage.
+ *
+ * Serialize this operation to support multiple tasks.
+ */
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (irq_on) {
+ if (test_and_clear_bit(0, &priv->flags))
+ enable_irq(dev_info->irq);
+ } else {
+ if (!test_and_set_bit(0, &priv->flags))
+ disable_irq(dev_info->irq);
+ }
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int uio_pdrv_genirq_probe(struct platform_device *pdev)
+{
+ struct uio_info *uioinfo = pdev->dev.platform_data;
+ struct uio_pdrv_genirq_platdata *priv;
+ struct uio_mem *uiomem;
+ int ret = -EINVAL;
+ int i;
+
+ if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+ dev_err(&pdev->dev, "missing platform_data\n");
+ goto bad0;
+ }
+
+ if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags) {
+ dev_err(&pdev->dev, "interrupt configuration error\n");
+ goto bad0;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "unable to kmalloc\n");
+ goto bad0;
+ }
+
+ priv->uioinfo = uioinfo;
+ spin_lock_init(&priv->lock);
+ priv->flags = 0; /* interrupt is enabled to begin with */
+
+ uiomem = &uioinfo->mem[0];
+
+ for (i = 0; i < pdev->num_resources; ++i) {
+ struct resource *r = &pdev->resource[i];
+
+ if (r->flags != IORESOURCE_MEM)
+ continue;
+
+ if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " I/O memory resources.\n");
+ break;
+ }
+
+ uiomem->memtype = UIO_MEM_PHYS;
+ uiomem->addr = r->start;
+ uiomem->size = r->end - r->start + 1;
+ ++uiomem;
+ }
+
+ while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+ uiomem->size = 0;
+ ++uiomem;
+ }
+
+ /* This driver requires no hardware specific kernel code to handle
+ * interrupts. Instead, the interrupt handler simply disables the
+ * interrupt in the interrupt controller. User space is responsible
+ * for performing hardware specific acknowledge and re-enabling of
+ * the interrupt in the interrupt controller.
+ *
+ * Interrupt sharing is not supported.
+ */
+
+ uioinfo->irq_flags = IRQF_DISABLED;
+ uioinfo->handler = uio_pdrv_genirq_handler;
+ uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+ uioinfo->priv = priv;
+
+ ret = uio_register_device(&pdev->dev, priv->uioinfo);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register uio device\n");
+ goto bad1;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ return 0;
+ bad1:
+ kfree(priv);
+ bad0:
+ return ret;
+}
+
+static int uio_pdrv_genirq_remove(struct platform_device *pdev)
+{
+ struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+ uio_unregister_device(priv->uioinfo);
+ kfree(priv);
+ return 0;
+}
+
+static struct platform_driver uio_pdrv_genirq = {
+ .probe = uio_pdrv_genirq_probe,
+ .remove = uio_pdrv_genirq_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init uio_pdrv_genirq_init(void)
+{
+ return platform_driver_register(&uio_pdrv_genirq);
+}
+
+static void __exit uio_pdrv_genirq_exit(void)
+{
+ platform_driver_unregister(&uio_pdrv_genirq);
+}
+
+module_init(uio_pdrv_genirq_init);
+module_exit(uio_pdrv_genirq_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
#include <linux/ctype.h>
#include <linux/sched.h>
#include <linux/kthread.h>
-#include <linux/version.h>
#include <linux/mutex.h>
#include <linux/freezer.h>
tasklet_schedule(&acm->urb_task);
done:
-err_out:
mutex_unlock(&acm->mutex);
+err_out:
mutex_unlock(&open_mutex);
return rv;
{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
*/
intf->pm_usage_cnt = !(driver->supports_autosuspend);
+ /* Carry out a deferred switch to altsetting 0 */
+ if (intf->needs_altsetting0) {
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ intf->needs_altsetting0 = 0;
+ }
+
error = driver->probe(intf, id);
if (error) {
mark_quiesced(intf);
driver->disconnect(intf);
- /* reset other interface state */
- usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+ /* Reset other interface state.
+ * We cannot do a Set-Interface if the device is suspended or
+ * if it is prepared for a system sleep (since installing a new
+ * altsetting means creating new endpoint device entries).
+ * When either of these happens, defer the Set-Interface.
+ */
+ if (!error && intf->dev.power.status == DPM_ON)
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ else
+ intf->needs_altsetting0 = 1;
usb_set_intfdata(intf, NULL);
intf->condition = USB_INTERFACE_UNBOUND;
* The caller must hold @intf's device's lock, but not its pm_mutex
* and not @intf->dev.sem.
*
- * FIXME: The caller must block system sleep transitions.
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
*/
void usb_rebind_intf(struct usb_interface *intf)
{
}
/* Try to rebind the interface */
- intf->needs_binding = 0;
- rc = device_attach(&intf->dev);
- if (rc < 0)
- dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+ if (intf->dev.power.status == DPM_ON) {
+ intf->needs_binding = 0;
+ rc = device_attach(&intf->dev);
+ if (rc < 0)
+ dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+ }
}
#ifdef CONFIG_PM
* or rebind interfaces that have been unbound, according to @action.
*
* The caller must hold @udev's device lock.
- * FIXME: For rebinds, the caller must block system sleep transitions.
*/
static void do_unbind_rebind(struct usb_device *udev, int action)
{
}
break;
case DO_REBIND:
- if (intf->needs_binding) {
-
- /* FIXME: The next line is needed because we are going to probe
- * the interface, but as far as the PM core is concerned the
- * interface is still suspended. The problem wouldn't exist
- * if we could rebind the interface during the interface's own
- * resume() call, but at the time the usb_device isn't locked!
- *
- * The real solution will be to carry this out during the device's
- * complete() callback. Until that is implemented, we have to
- * use this hack.
- */
-// intf->dev.power.sleeping = 0;
-
+ if (intf->needs_binding)
usb_rebind_intf(intf);
- }
break;
}
}
}
/* Caller has locked intf's usb_device's pm mutex */
-static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_device *udev,
+ struct usb_interface *intf, pm_message_t msg)
{
struct usb_driver *driver;
int status = 0;
/* with no hardware, USB interfaces only use FREEZE and ON states */
- if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
- !is_active(intf))
+ if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
goto done;
if (intf->condition == USB_INTERFACE_UNBOUND) /* This can't happen */
status = driver->suspend(intf, msg);
if (status == 0)
mark_quiesced(intf);
- else if (!interface_to_usbdev(intf)->auto_pm)
+ else if (!udev->auto_pm)
dev_err(&intf->dev, "%s error %d\n",
"suspend", status);
} else {
}
/* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
+static int usb_resume_interface(struct usb_device *udev,
+ struct usb_interface *intf, int reset_resume)
{
struct usb_driver *driver;
int status = 0;
- if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
- is_active(intf))
+ if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
goto done;
/* Don't let autoresume interfere with unbinding */
goto done;
/* Can't resume it if it doesn't have a driver. */
- if (intf->condition == USB_INTERFACE_UNBOUND)
+ if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+ /* Carry out a deferred switch to altsetting 0 */
+ if (intf->needs_altsetting0 &&
+ intf->dev.power.status == DPM_ON) {
+ usb_set_interface(udev, intf->altsetting[0].
+ desc.bInterfaceNumber, 0);
+ intf->needs_altsetting0 = 0;
+ }
goto done;
+ }
/* Don't resume if the interface is marked for rebinding */
if (intf->needs_binding)
if (udev->actconfig) {
for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- status = usb_suspend_interface(intf, msg);
+ status = usb_suspend_interface(udev, intf, msg);
if (status != 0)
break;
}
if (status != 0) {
while (--i >= 0) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf, 0);
+ usb_resume_interface(udev, intf, 0);
}
/* Try another autosuspend when the interfaces aren't busy */
if (status == 0 && udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
- usb_resume_interface(intf, udev->reset_resume);
+ usb_resume_interface(udev, intf, udev->reset_resume);
}
}
return status;
}
-static int usb_suspend(struct device *dev, pm_message_t message)
+int usb_suspend(struct device *dev, pm_message_t message)
{
struct usb_device *udev;
- if (!is_usb_device(dev)) /* Ignore PM for interfaces */
- return 0;
udev = to_usb_device(dev);
/* If udev is already suspended, we can skip this suspend and
return usb_external_suspend_device(udev, message);
}
-static int usb_resume(struct device *dev)
+int usb_resume(struct device *dev)
{
struct usb_device *udev;
- if (!is_usb_device(dev)) /* Ignore PM for interfaces */
- return 0;
udev = to_usb_device(dev);
/* If udev->skip_sys_resume is set then udev was already suspended
return usb_external_resume_device(udev);
}
-#else
-
-#define usb_suspend NULL
-#define usb_resume NULL
-
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
- .suspend = usb_suspend,
- .resume = usb_resume,
};
return retval;
}
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
- struct usb_hcd *hcd;
-
- hcd = container_of (bus, struct usb_hcd, self);
- if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
- hcd->driver->hub_irq_enable (hcd);
-}
-
/*-------------------------------------------------------------------------*/
int (*bus_suspend)(struct usb_hcd *);
int (*bus_resume)(struct usb_hcd *);
int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
- void (*hub_irq_enable)(struct usb_hcd *);
- /* Needed only if port-change IRQs are level-triggered */
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
extern struct mutex usb_bus_list_lock;
extern wait_queue_head_t usb_kill_urb_queue;
-extern void usb_enable_root_hub_irq(struct usb_bus *bus);
-
extern int usb_find_interface_driver(struct usb_device *dev,
struct usb_interface *interface);
}
clear_bit(port1, hub->busy_bits);
- if (!hub->hdev->parent && !hub->busy_bits[0])
- usb_enable_root_hub_irq(hub->hdev->bus);
status = check_port_resume_type(udev,
hub, port1, status, portchange, portstatus);
}
}
- /* If this is a root hub, tell the HCD it's okay to
- * re-enable port-change interrupts now. */
- if (!hdev->parent && !hub->busy_bits[0])
- usb_enable_root_hub_irq(hdev->bus);
-
loop_autopm:
/* Allow autosuspend if we're not going to run again */
if (list_empty(&hub->event_list))
break;
}
clear_bit(port1, parent_hub->busy_bits);
- if (!parent_hdev->parent && !parent_hub->busy_bits[0])
- usb_enable_root_hub_irq(parent_hdev->bus);
if (ret < 0)
goto re_enumerate;
void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
{
struct urb *victim;
+ unsigned long flags;
- spin_lock_irq(&anchor->lock);
+ spin_lock_irqsave(&anchor->lock, flags);
while (!list_empty(&anchor->urb_list)) {
victim = list_entry(anchor->urb_list.prev, struct urb,
anchor_list);
+ usb_get_urb(victim);
+ spin_unlock_irqrestore(&anchor->lock, flags);
/* this will unanchor the URB */
usb_unlink_urb(victim);
+ usb_put_urb(victim);
+ spin_lock_irqsave(&anchor->lock, flags);
}
- spin_unlock_irq(&anchor->lock);
+ spin_unlock_irqrestore(&anchor->lock, flags);
}
EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
}
#endif /* CONFIG_HOTPLUG */
-struct device_type usb_device_type = {
- .name = "usb_device",
- .release = usb_release_dev,
- .uevent = usb_dev_uevent,
-};
-
#ifdef CONFIG_PM
static int ksuspend_usb_init(void)
destroy_workqueue(ksuspend_usb_wq);
}
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce. And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+ return 0; /* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+ /* Currently used only for rebinding interfaces */
+ usb_resume(dev); /* Implement eventually? */
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+ return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+ return usb_resume(dev);
+}
+
+static struct pm_ops usb_device_pm_ops = {
+ .prepare = usb_dev_prepare,
+ .complete = usb_dev_complete,
+ .suspend = usb_dev_suspend,
+ .resume = usb_dev_resume,
+ .freeze = usb_dev_freeze,
+ .thaw = usb_dev_thaw,
+ .poweroff = usb_dev_poweroff,
+ .restore = usb_dev_restore,
+};
+
#else
#define ksuspend_usb_init() 0
#define ksuspend_usb_cleanup() do {} while (0)
+#define usb_device_pm_ops (*(struct pm_ops *)0)
#endif /* CONFIG_PM */
+struct device_type usb_device_type = {
+ .name = "usb_device",
+ .release = usb_release_dev,
+ .uevent = usb_dev_uevent,
+ .pm = &usb_device_pm_ops,
+};
+
/* Returns 1 if @usb_bus is WUSB, 0 otherwise */
static unsigned usb_bus_is_wusb(struct usb_bus *bus)
#ifdef CONFIG_PM
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev);
+
extern void usb_autosuspend_work(struct work_struct *work);
extern int usb_port_suspend(struct usb_device *dev);
extern int usb_port_resume(struct usb_device *dev);
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/sched.h>
struct pxa_udc *udc = the_controller;
int retval;
- if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+ if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
|| !driver->disconnect || !driver->setup)
return -EINVAL;
if (!udc)
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/version.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mbus.h>
-#include <asm/plat-orion/ehci-orion.h>
+#include <plat/ehci-orion.h>
#define rdl(off) __raw_readl(hcd->regs + (off))
#define wrl(off, val) __raw_writel((val), hcd->regs + (off))
/*
* write bank1 address twice to ensure the 90ns delay (time
* between BANK0 write and the priv_read_copy() call is at
- * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+ * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
*/
isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs +
HC_MEMORY_REG);
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
/*-------------------------------------------------------------------------*/
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-
- spin_lock_irq(&ohci->lock);
- if (!ohci->autostop)
- del_timer(&hcd->rh_timer); /* Prevent next poll */
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- spin_unlock_irq(&ohci->lock);
-}
-
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
int any_connected)
{
int poll_rh = 1;
+ int rhsc;
+ rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* keep on polling until we know a device is connected
- * and RHSC is enabled */
+ /* If no status changes are pending, enable status-change
+ * interrupts.
+ */
+ if (!rhsc && !changed) {
+ rhsc = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+ }
+
+ /* Keep on polling until we know a device is connected
+ * and RHSC is enabled, or until we autostop.
+ */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (ohci_readl(ohci, &ohci->regs->intrenable) &
- OHCI_INTR_RHSC)
+ if (rhsc)
poll_rh = 0;
} else {
ohci->autostop = 1;
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (time_after_eq(jiffies,
+ } else if (rhsc && time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
+ poll_rh = 0;
}
}
break;
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
+ if (!rhsc && (ohci->autostop ||
+ ohci_to_hcd(ohci)->self.root_hub->
+ do_remote_wakeup))
+ ohci_writel(ohci, OHCI_INTR_RHSC,
+ &ohci->regs->intrenable);
+
/* everything is idle, no need for polling */
poll_rh = 0;
}
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- int poll_rh = 1;
-
- /* keep on polling until RHSC is enabled */
+ /* If RHSC is enabled, don't poll */
if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- poll_rh = 0;
- return poll_rh;
+ return 0;
+
+ /* If no status changes are pending, enable status-change interrupts */
+ if (!changed) {
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ return 0;
+ }
+ return 1;
}
#endif /* CONFIG_PM */
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
.start_port_reset = ohci_start_port_reset,
#if defined(CONFIG_PM)
.bus_suspend = ohci_bus_suspend,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_s3c2410_hub_status_data,
.hub_control = ohci_s3c2410_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
- .hub_irq_enable = ohci_rhsc_enable,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
return 0;
}
-static void u132_hub_irq_enable(struct usb_hcd *hcd)
-{
- struct u132 *u132 = hcd_to_u132(hcd);
- if (u132->going > 1) {
- dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
- , u132->going);
- } else if (u132->going > 0)
- dev_err(&u132->platform_dev->dev, "device is being removed\n");
-}
-
#ifdef CONFIG_PM
static int u132_bus_suspend(struct usb_hcd *hcd)
.bus_suspend = u132_bus_suspend,
.bus_resume = u132_bus_resume,
.start_port_reset = u132_start_port_reset,
- .hub_irq_enable = u132_hub_irq_enable,
};
/*
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/poll.h>
-#include <linux/version.h>
#include <linux/usb/iowarrior.h>
/* Version Information */
{ USB_DEVICE(0x0711, 0x0900) },
{ USB_DEVICE(0x0711, 0x0901) },
{ USB_DEVICE(0x0711, 0x0902) },
+ { USB_DEVICE(0x0711, 0x0918) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
help
Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
-config USB_MUSB_LOGLEVEL
+config USB_MUSB_DEBUG
depends on USB_MUSB_HDRC
- int 'Logging Level (0 - none / 3 - annoying / ... )'
- default 0
+ bool "Enable debugging messages"
+ default n
help
- Set the logging level. 0 disables the debugging altogether,
- although when USB_DEBUG is set the value is at least 1.
- Starting at level 3, per-transfer (urb, usb_request, packet,
- or dma transfer) tracing may kick in.
+ This enables musb debugging. To set the logging level use the debug
+ module parameter. Starting at level 3, per-transfer (urb, usb_request,
+ packet, or dma transfer) tracing may kick in.
# Debugging
-MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
-
-ifeq ("$(strip $(MUSB_DEBUG))","")
- ifdef CONFIG_USB_DEBUG
- MUSB_DEBUG:=1
- else
- MUSB_DEBUG:=0
- endif
+ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
+ EXTRA_CFLAGS += -DDEBUG
endif
-
-ifneq ($(MUSB_DEBUG),0)
- EXTRA_CFLAGS += -DDEBUG
-
- ifeq ($(CONFIG_PROC_FS),y)
- musb_hdrc-objs += musb_procfs.o
- endif
-
-endif
-
-EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
-#if MUSB_DEBUG > 0
-unsigned debug = MUSB_DEBUG;
-module_param(debug, uint, 0);
-MODULE_PARM_DESC(debug, "initial debug message level");
-
-#define MUSB_VERSION_SUFFIX "/dbg"
-#endif
+unsigned debug;
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
#define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
#define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
-#define MUSB_VERSION_BASE "6.0"
-
-#ifndef MUSB_VERSION_SUFFIX
-#define MUSB_VERSION_SUFFIX ""
-#endif
-#define MUSB_VERSION MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+#define MUSB_VERSION "6.0"
#define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
musb->xceiv.state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ if (status)
+ goto fail;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb->xceiv.state = OTG_STATE_B_IDLE;
status = musb_gadget_setup(musb);
+ if (status)
+ goto fail;
DBG(1, "%s mode, status %d, dev%02x\n",
is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
}
- if (status == 0)
- musb_debug_create("driver/musb_hdrc", musb);
- else {
+ return 0;
+
fail:
- if (musb->clock)
- clk_put(musb->clock);
- device_init_wakeup(dev, 0);
- musb_free(musb);
- return status;
- }
+ if (musb->clock)
+ clk_put(musb->clock);
+ device_init_wakeup(dev, 0);
+ musb_free(musb);
+ return status;
#ifdef CONFIG_SYSFS
status = device_create_file(dev, &dev_attr_mode);
* - OTG mode: both roles are deactivated (or never-activated)
*/
musb_shutdown(pdev);
- musb_debug_delete("driver/musb_hdrc", musb);
#ifdef CONFIG_USB_MUSB_HDRC_HCD
if (musb->board_mode == MUSB_HOST)
usb_remove_hcd(musb_to_hcd(musb));
extern int __init musb_platform_init(struct musb *musb);
extern int musb_platform_exit(struct musb *musb);
-/*-------------------------- ProcFS definitions ---------------------*/
-
-struct proc_dir_entry;
-
-#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
-extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
-extern void musb_debug_delete(char *name, struct musb *data);
-
-#else
-static inline struct proc_dir_entry *
-musb_debug_create(char *name, struct musb *data)
-{
- return NULL;
-}
-static inline void musb_debug_delete(char *name, struct musb *data)
-{
-}
-#endif
-
#endif /* __MUSB_CORE_H__ */
__func__, __LINE__ , ## args); \
} } while (0)
-#if MUSB_DEBUG > 0
extern unsigned debug;
-#else
-#define debug 0
-#endif
static inline int _dbg_level(unsigned l)
{
return;
musb->ackpend = 0;
}
+ musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, tmp);
}
}
/* send it out, triggering a "txpktrdy cleared" irq */
+ musb_ep_select(musb->mregs, 0);
musb_writew(regs, MUSB_CSR0, csr);
}
+++ /dev/null
-/*
- * MUSB OTG driver debug support
- *
- * Copyright 2005 Mentor Graphics Corporation
- * Copyright (C) 2005-2006 by Texas Instruments
- * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h> /* FIXME remove procfs writes */
-#include <asm/arch/hardware.h>
-
-#include "musb_core.h"
-
-#include "davinci.h"
-
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-
-static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
-{
- int count;
- int tmp;
- struct usb_host_endpoint *hep = qh->hep;
- struct urb *urb;
-
- count = snprintf(buf, max, " qh %p dev%d ep%d%s max%d\n",
- qh, qh->dev->devnum, qh->epnum,
- ({ char *s; switch (qh->type) {
- case USB_ENDPOINT_XFER_BULK:
- s = "-bulk"; break;
- case USB_ENDPOINT_XFER_INT:
- s = "-int"; break;
- case USB_ENDPOINT_XFER_CONTROL:
- s = ""; break;
- default:
- s = "iso"; break;
- }; s; }),
- qh->maxpacket);
- if (count <= 0)
- return 0;
- buf += count;
- max -= count;
-
- list_for_each_entry(urb, &hep->urb_list, urb_list) {
- tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
- usb_pipein(urb->pipe) ? "in" : "out",
- urb, urb->actual_length,
- urb->transfer_buffer_length);
- if (tmp <= 0)
- break;
- tmp = min(tmp, (int)max);
- count += tmp;
- buf += tmp;
- max -= tmp;
- }
- return count;
-}
-
-static int
-dump_queue(struct list_head *q, char *buf, unsigned max)
-{
- int count = 0;
- struct musb_qh *qh;
-
- list_for_each_entry(qh, q, ring) {
- int tmp;
-
- tmp = dump_qh(qh, buf, max);
- if (tmp <= 0)
- break;
- tmp = min(tmp, (int)max);
- count += tmp;
- buf += tmp;
- max -= tmp;
- }
- return count;
-}
-
-#endif /* HCD */
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
-{
- char *buf = buffer;
- int code = 0;
- void __iomem *regs = ep->hw_ep->regs;
- char *mode = "1buf";
-
- if (ep->is_in) {
- if (ep->hw_ep->tx_double_buffered)
- mode = "2buf";
- } else {
- if (ep->hw_ep->rx_double_buffered)
- mode = "2buf";
- }
-
- do {
- struct usb_request *req;
-
- code = snprintf(buf, max,
- "\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
- ep->name, ep->current_epnum,
- mode, ep->dma ? " dma" : "",
- musb_readw(regs,
- (ep->is_in || !ep->current_epnum)
- ? MUSB_TXCSR
- : MUSB_RXCSR),
- musb_readw(regs, ep->is_in
- ? MUSB_TXMAXP
- : MUSB_RXMAXP)
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled() && ep->current_epnum) {
- unsigned cppi = ep->current_epnum - 1;
- void __iomem *base = ep->musb->ctrl_base;
- unsigned off1 = cppi << 2;
- void __iomem *ram = base;
- char tmp[16];
-
- if (ep->is_in) {
- ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
- tmp[0] = 0;
- } else {
- ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
- snprintf(tmp, sizeof tmp, "%d left, ",
- musb_readl(base,
- DAVINCI_RXCPPI_BUFCNT0_REG + off1));
- }
-
- code = snprintf(buf, max, "%cX DMA%d: %s"
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- ep->is_in ? 'T' : 'R',
- ep->current_epnum - 1, tmp,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (list_empty(&ep->req_list)) {
- code = snprintf(buf, max, "\t(queue empty)\n");
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- break;
- }
- list_for_each_entry(req, &ep->req_list, list) {
- code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
- req,
- req->zero ? "zero, " : "",
- req->short_not_ok ? "!short, " : "",
- req->actual, req->length);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- } while (0);
- return buf - buffer;
-}
-#endif
-
-static int
-dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
-{
- int code = 0;
- char *buf = aBuffer;
- struct musb_hw_ep *hw_ep = &musb->endpoints[epnum];
-
- do {
- musb_ep_select(musb->mregs, epnum);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- if (is_host_active(musb)) {
- int dump_rx, dump_tx;
- void __iomem *regs = hw_ep->regs;
-
- /* TEMPORARY (!) until we have a real periodic
- * schedule tree ...
- */
- if (!epnum) {
- /* control is shared, uses RX queue
- * but (mostly) shadowed tx registers
- */
- dump_tx = !list_empty(&musb->control);
- dump_rx = 0;
- } else if (hw_ep == musb->bulk_ep) {
- dump_tx = !list_empty(&musb->out_bulk);
- dump_rx = !list_empty(&musb->in_bulk);
- } else if (musb->periodic[epnum]) {
- struct usb_host_endpoint *hep;
-
- hep = musb->periodic[epnum]->hep;
- dump_rx = hep->desc.bEndpointAddress
- & USB_ENDPOINT_DIR_MASK;
- dump_tx = !dump_rx;
- } else
- break;
- /* END TEMPORARY */
-
-
- if (dump_rx) {
- code = snprintf(buf, max,
- "\nRX%d: %s rxcsr %04x interval %02x "
- "max %04x type %02x; "
- "dev %d hub %d port %d"
- "\n",
- epnum,
- hw_ep->rx_double_buffered
- ? "2buf" : "1buf",
- musb_readw(regs, MUSB_RXCSR),
- musb_readb(regs, MUSB_RXINTERVAL),
- musb_readw(regs, MUSB_RXMAXP),
- musb_readb(regs, MUSB_RXTYPE),
- /* FIXME: assumes multipoint */
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXFUNCADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXHUBADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_RXHUBPORT))
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled()
- && epnum
- && hw_ep->rx_channel) {
- unsigned cppi = epnum - 1;
- unsigned off1 = cppi << 2;
- void __iomem *base;
- void __iomem *ram;
- char tmp[16];
-
- base = musb->ctrl_base;
- ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
- cppi) + base;
- snprintf(tmp, sizeof tmp, "%d left, ",
- musb_readl(base,
- DAVINCI_RXCPPI_BUFCNT0_REG
- + off1));
-
- code = snprintf(buf, max,
- " rx dma%d: %s"
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- cppi, tmp,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (hw_ep == musb->bulk_ep
- && !list_empty(
- &musb->in_bulk)) {
- code = dump_queue(&musb->in_bulk,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (musb->periodic[epnum]) {
- code = dump_qh(musb->periodic[epnum],
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
-
- if (dump_tx) {
- code = snprintf(buf, max,
- "\nTX%d: %s txcsr %04x interval %02x "
- "max %04x type %02x; "
- "dev %d hub %d port %d"
- "\n",
- epnum,
- hw_ep->tx_double_buffered
- ? "2buf" : "1buf",
- musb_readw(regs, MUSB_TXCSR),
- musb_readb(regs, MUSB_TXINTERVAL),
- musb_readw(regs, MUSB_TXMAXP),
- musb_readb(regs, MUSB_TXTYPE),
- /* FIXME: assumes multipoint */
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXFUNCADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXHUBADDR)),
- musb_readb(musb->mregs,
- MUSB_BUSCTL_OFFSET(epnum,
- MUSB_TXHUBPORT))
- );
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
-
- if (is_cppi_enabled()
- && epnum
- && hw_ep->tx_channel) {
- unsigned cppi = epnum - 1;
- void __iomem *base;
- void __iomem *ram;
-
- base = musb->ctrl_base;
- ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
- cppi) + base;
- code = snprintf(buf, max,
- " tx dma%d: "
- "%08x %08x, %08x %08x; "
- "%08x %08x %08x .. %08x\n",
- cppi,
- musb_readl(ram, 0 * 4),
- musb_readl(ram, 1 * 4),
- musb_readl(ram, 2 * 4),
- musb_readl(ram, 3 * 4),
- musb_readl(ram, 4 * 4),
- musb_readl(ram, 5 * 4),
- musb_readl(ram, 6 * 4),
- musb_readl(ram, 7 * 4));
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
-
- if (hw_ep == musb->control_ep
- && !list_empty(
- &musb->control)) {
- code = dump_queue(&musb->control,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (hw_ep == musb->bulk_ep
- && !list_empty(
- &musb->out_bulk)) {
- code = dump_queue(&musb->out_bulk,
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- } else if (musb->periodic[epnum]) {
- code = dump_qh(musb->periodic[epnum],
- buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
- }
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- if (is_peripheral_active(musb)) {
- code = 0;
-
- if (hw_ep->ep_in.desc || !epnum) {
- code = dump_ep(&hw_ep->ep_in, buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- if (hw_ep->ep_out.desc) {
- code = dump_ep(&hw_ep->ep_out, buf, max);
- if (code <= 0)
- break;
- code = min(code, (int) max);
- buf += code;
- max -= code;
- }
- }
-#endif
- } while (0);
-
- return buf - aBuffer;
-}
-
-/* Dump the current status and compile options.
- * @param musb the device driver instance
- * @param buffer where to dump the status; it must be big enough to hold the
- * result otherwise "BAD THINGS HAPPENS(TM)".
- */
-static int dump_header_stats(struct musb *musb, char *buffer)
-{
- int code, count = 0;
- const void __iomem *mbase = musb->mregs;
-
- *buffer = 0;
- count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
- "(Power=%02x, DevCtl=%02x)\n",
- (musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
- musb_readb(mbase, MUSB_POWER),
- musb_readb(mbase, MUSB_DEVCTL));
- if (count <= 0)
- return 0;
- buffer += count;
-
- code = sprintf(buffer, "OTG state: %s; %sactive\n",
- otg_state_string(musb),
- musb->is_active ? "" : "in");
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-
- code = sprintf(buffer,
- "Options: "
-#ifdef CONFIG_MUSB_PIO_ONLY
- "pio"
-#elif defined(CONFIG_USB_TI_CPPI_DMA)
- "cppi-dma"
-#elif defined(CONFIG_USB_INVENTRA_DMA)
- "musb-dma"
-#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
- "tusb-omap-dma"
-#else
- "?dma?"
-#endif
- ", "
-#ifdef CONFIG_USB_MUSB_OTG
- "otg (peripheral+host)"
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- "peripheral"
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
- "host"
-#endif
- ", debug=%d [eps=%d]\n",
- debug,
- musb->nr_endpoints);
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- code = sprintf(buffer, "Peripheral address: %02x\n",
- musb_readb(musb->ctrl_base, MUSB_FADDR));
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-#endif
-
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
- code = sprintf(buffer, "Root port status: %08x\n",
- musb->port1_status);
- if (code <= 0)
- goto done;
- buffer += code;
- count += code;
-#endif
-
-#ifdef CONFIG_ARCH_DAVINCI
- code = sprintf(buffer,
- "DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
- "\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
- "\n",
- musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
- musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
- __raw_readl((void __force __iomem *)
- IO_ADDRESS(USBPHY_CTL_PADDR)),
- musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
- musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_USB_INT_SOURCE_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_USB_INT_MASK_REG));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-#endif /* DAVINCI */
-
-#ifdef CONFIG_USB_TUSB6010
- code = sprintf(buffer,
- "TUSB6010: devconf %08x, phy enable %08x drive %08x"
- "\n\totg %03x timer %08x"
- "\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
- "\n",
- musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
- musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
- musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
- musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
- musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
- musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
- musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
- musb_readl(musb->ctrl_base, TUSB_INT_SRC),
- musb_readl(musb->ctrl_base, TUSB_INT_MASK));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
-#endif /* DAVINCI */
-
- if (is_cppi_enabled() && musb->dma_controller) {
- code = sprintf(buffer,
- "CPPI: txcr=%d txsrc=%01x txena=%01x; "
- "rxcr=%d rxsrc=%01x rxena=%01x "
- "\n",
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_CTRL_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_RAW_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_TXCPPI_INTENAB_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_CTRL_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_RAW_REG),
- musb_readl(musb->ctrl_base,
- DAVINCI_RXCPPI_INTENAB_REG));
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
- }
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
- if (is_peripheral_enabled(musb)) {
- code = sprintf(buffer, "Gadget driver: %s\n",
- musb->gadget_driver
- ? musb->gadget_driver->driver.name
- : "(none)");
- if (code <= 0)
- goto done;
- count += code;
- buffer += code;
- }
-#endif
-
-done:
- return count;
-}
-
-/* Write to ProcFS
- *
- * C soft-connect
- * c soft-disconnect
- * I enable HS
- * i disable HS
- * s stop session
- * F force session (OTG-unfriendly)
- * E rElinquish bus (OTG)
- * H request host mode
- * h cancel host request
- * T start sending TEST_PACKET
- * D<num> set/query the debug level
- */
-static int musb_proc_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- char cmd;
- u8 reg;
- struct musb *musb = (struct musb *)data;
- void __iomem *mbase = musb->mregs;
-
- /* MOD_INC_USE_COUNT; */
-
- if (unlikely(copy_from_user(&cmd, buffer, 1)))
- return -EFAULT;
-
- switch (cmd) {
- case 'C':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- | MUSB_POWER_SOFTCONN;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'c':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- & ~MUSB_POWER_SOFTCONN;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'I':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- | MUSB_POWER_HSENAB;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'i':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_POWER)
- & ~MUSB_POWER_HSENAB;
- musb_writeb(mbase, MUSB_POWER, reg);
- }
- break;
-
- case 'F':
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg |= MUSB_DEVCTL_SESSION;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- break;
-
- case 'H':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg |= MUSB_DEVCTL_HR;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- /* MUSB_HST_MODE( ((struct musb*)data) ); */
- /* WARNING("Host Mode\n"); */
- }
- break;
-
- case 'h':
- if (mbase) {
- reg = musb_readb(mbase, MUSB_DEVCTL);
- reg &= ~MUSB_DEVCTL_HR;
- musb_writeb(mbase, MUSB_DEVCTL, reg);
- }
- break;
-
- case 'T':
- if (mbase) {
- musb_load_testpacket(musb);
- musb_writeb(mbase, MUSB_TESTMODE,
- MUSB_TEST_PACKET);
- }
- break;
-
-#if (MUSB_DEBUG > 0)
- /* set/read debug level */
- case 'D':{
- if (count > 1) {
- char digits[8], *p = digits;
- int i = 0, level = 0, sign = 1;
- int len = min(count - 1, (unsigned long)8);
-
- if (copy_from_user(&digits, &buffer[1], len))
- return -EFAULT;
-
- /* optional sign */
- if (*p == '-') {
- len -= 1;
- sign = -sign;
- p++;
- }
-
- /* read it */
- while (i++ < len && *p > '0' && *p < '9') {
- level = level * 10 + (*p - '0');
- p++;
- }
-
- level *= sign;
- DBG(1, "debug level %d\n", level);
- debug = level;
- }
- }
- break;
-
-
- case '?':
- INFO("?: you are seeing it\n");
- INFO("C/c: soft connect enable/disable\n");
- INFO("I/i: hispeed enable/disable\n");
- INFO("F: force session start\n");
- INFO("H: host mode\n");
- INFO("T: start sending TEST_PACKET\n");
- INFO("D: set/read dbug level\n");
- break;
-#endif
-
- default:
- ERR("Command %c not implemented\n", cmd);
- break;
- }
-
- musb_platform_try_idle(musb, 0);
-
- return count;
-}
-
-static int musb_proc_read(char *page, char **start,
- off_t off, int count, int *eof, void *data)
-{
- char *buffer = page;
- int code = 0;
- unsigned long flags;
- struct musb *musb = data;
- unsigned epnum;
-
- count -= off;
- count -= 1; /* for NUL at end */
- if (count <= 0)
- return -EINVAL;
-
- spin_lock_irqsave(&musb->lock, flags);
-
- code = dump_header_stats(musb, buffer);
- if (code > 0) {
- buffer += code;
- count -= code;
- }
-
- /* generate the report for the end points */
- /* REVISIT ... not unless something's connected! */
- for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
- epnum++) {
- code = dump_end_info(musb, epnum, buffer, count);
- if (code > 0) {
- buffer += code;
- count -= code;
- }
- }
-
- musb_platform_try_idle(musb, 0);
-
- spin_unlock_irqrestore(&musb->lock, flags);
- *eof = 1;
-
- return buffer - page;
-}
-
-void __devexit musb_debug_delete(char *name, struct musb *musb)
-{
- if (musb->proc_entry)
- remove_proc_entry(name, NULL);
-}
-
-struct proc_dir_entry *__init
-musb_debug_create(char *name, struct musb *data)
-{
- struct proc_dir_entry *pde;
-
- /* FIXME convert everything to seq_file; then later, debugfs */
-
- if (!name)
- return NULL;
-
- pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
- data->proc_entry = pde;
- if (pde) {
- pde->data = data;
- /* pde->owner = THIS_MODULE; */
-
- pde->read_proc = musb_proc_read;
- pde->write_proc = musb_proc_write;
-
- pde->size = 0;
-
- pr_debug("Registered /proc/%s\n", name);
- } else {
- pr_debug("Cannot create a valid proc file entry");
- }
-
- return pde;
-}
#include <linux/usb.h>
#include <linux/usb/serial.h>
-#include <linux/version.h>
-
/* the mode to be set when the port ist opened */
static int initial_mode = 1;
#define KYOCERA_PRODUCT_KPC680 0x180a
#define ANYDATA_VENDOR_ID 0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW 0x6202
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
#define ANYDATA_PRODUCT_ADU_500A 0x6502
{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
* Code is based on s3fb
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
{
struct fb_info *fbinfo = platform_get_drvdata(pdev);
- struct bfin_bf54xfb_info *info = fbinfo->par;
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
disable_dma(CH_EPPI0);
struct fb_info *fbinfo = platform_get_drvdata(pdev);
struct bfin_bf54xfb_info *info = fbinfo->par;
- enable_dma(CH_EPPI0);
- bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ if (info->lq043_open_cnt) {
+
+ bfin_write_EPPI0_CONTROL(0);
+ SSYNC();
+
+ config_dma(info);
+ config_ppi(info);
+
+ /* start dma */
+ enable_dma(CH_EPPI0);
+ bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+ }
return 0;
}
.page_mkwrite = fb_deferred_io_mkwrite,
};
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+ if (!PageDirty(page))
+ SetPageDirty(page);
+ return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+ .set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
{
vma->vm_ops = &fb_deferred_io_vm_ops;
}
EXPORT_SYMBOL_GPL(fb_deferred_io_init);
+void fb_deferred_io_open(struct fb_info *info,
+ struct inode *inode,
+ struct file *file)
+{
+ file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
void fb_deferred_io_cleanup(struct fb_info *info)
{
void *screen_base = (void __force *) info->screen_base;
if (res)
module_put(info->fbops->owner);
}
+#ifdef CONFIG_FB_DEFERRED_IO
+ if (info->fbdefio)
+ fb_deferred_io_open(info, inode, file);
+#endif
out:
unlock_kernel();
return res;
base_plane_width = machine_data->fsl_diu_info[0]->var.xres;
base_plane_height = machine_data->fsl_diu_info[0]->var.yres;
+ if (mfbi->x_aoi_d < 0)
+ mfbi->x_aoi_d = 0;
+ if (mfbi->y_aoi_d < 0)
+ mfbi->y_aoi_d = 0;
switch (index) {
case 0:
if (mfbi->x_aoi_d != 0)
info->fix.smem_len = 0;
}
+/*
+ * Using the fb_var_screeninfo in fb_info we set the aoi of this
+ * particular framebuffer. It is a light version of fsl_diu_set_par.
+ */
+static int fsl_diu_set_aoi(struct fb_info *info)
+{
+ struct fb_var_screeninfo *var = &info->var;
+ struct mfb_info *mfbi = info->par;
+ struct diu_ad *ad = mfbi->ad;
+
+ /* AOI should not be greater than display size */
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
+ ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
+ return 0;
+}
+
/*
* Using the fb_var_screeninfo in fb_info we set the resolution of this
* particular framebuffer. This function alters the fb_fix_screeninfo stored
diu_ops.get_pixel_format(var->bits_per_pixel,
machine_data->monitor_port);
ad->addr = cpu_to_le32(info->fix.smem_start);
- ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) |
- var->xres) | mfbi->g_alpha;
- /* fix me. AOI should not be greater than display size */
+ ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) |
+ var->xres_virtual) | mfbi->g_alpha;
+ /* AOI should not be greater than display size */
ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres);
- ad->offset_xyi = 0;
+ ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset);
ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d);
/* Disable chroma keying function */
else
info->var.vmode &= ~FB_VMODE_YWRAP;
+ fsl_diu_set_aoi(info);
+
return 0;
}
pr_debug("set AOI display offset of index %d to (%d,%d)\n",
mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d);
fsl_diu_check_var(&info->var, info);
- fsl_diu_set_par(info);
+ fsl_diu_set_aoi(info);
break;
case MFB_GET_AOID:
aoi_d.x_aoi_d = mfbi->x_aoi_d;
release_mem_region(fix->mmio_start, fix->mmio_len);
pci_set_drvdata(pdev, NULL);
+ fb_dealloc_cmap(&info->cmap);
kfree(info->pixmap.addr);
kfree(info);
}
pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
- pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+
+ if ((lccr0 & LCCR0_PAS) == 0)
+ pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
}
static void pxafb_enable_controller(struct pxafb_info *fbi)
if (lcd_conn == LCD_MONO_STN_8BPP)
fbi->lccr0 |= LCCR0_DPD;
+ fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0;
+
fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff);
fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0;
fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0;
#define pxafb_setup_options() (0)
#endif
-static int __devinit pxafb_probe(struct platform_device *dev)
-{
- struct pxafb_info *fbi;
- struct pxafb_mach_info *inf;
- struct resource *r;
- int irq, ret;
-
- dev_dbg(&dev->dev, "pxafb_probe\n");
-
- inf = dev->dev.platform_data;
- ret = -ENOMEM;
- fbi = NULL;
- if (!inf)
- goto failed;
-
- ret = pxafb_parse_options(&dev->dev, g_options);
- if (ret < 0)
- goto failed;
-
#ifdef DEBUG_VAR
- /* Check for various illegal bit-combinations. Currently only
- * a warning is given. */
+/* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+static void __devinit pxafb_check_options(struct device *dev,
+ struct pxafb_mach_info *inf)
+{
+ if (inf->lcd_conn)
+ return;
if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR0 setting contains "
+ dev_warn(dev, "machine LCCR0 setting contains "
"illegal bits: %08x\n",
inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
- dev_warn(&dev->dev, "machine LCCR3 setting contains "
+ dev_warn(dev, "machine LCCR3 setting contains "
"illegal bits: %08x\n",
inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
if (inf->lccr0 & LCCR0_DPD &&
((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
(inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
(inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
- dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is "
+ dev_warn(dev, "Double Pixel Data (DPD) mode is "
"only valid in passive mono"
" single panel mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
(inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
- dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
+ dev_warn(dev, "Dual panel only valid in passive mode\n");
if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
(inf->modes->upper_margin || inf->modes->lower_margin))
- dev_warn(&dev->dev, "Upper and lower margins must be 0 in "
+ dev_warn(dev, "Upper and lower margins must be 0 in "
"passive mode\n");
+}
+#else
+#define pxafb_check_options(...) do {} while (0)
#endif
+static int __devinit pxafb_probe(struct platform_device *dev)
+{
+ struct pxafb_info *fbi;
+ struct pxafb_mach_info *inf;
+ struct resource *r;
+ int irq, ret;
+
+ dev_dbg(&dev->dev, "pxafb_probe\n");
+
+ inf = dev->dev.platform_data;
+ ret = -ENOMEM;
+ fbi = NULL;
+ if (!inf)
+ goto failed;
+
+ ret = pxafb_parse_options(&dev->dev, g_options);
+ if (ret < 0)
+ goto failed;
+
+ pxafb_check_options(&dev->dev, inf);
+
dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",
inf->modes->xres,
inf->modes->yres,
* which is based on the code of neofb.
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
info->fbops = &sh_mobile_lcdc_ops;
info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+ info->var.width = cfg->lcd_size_cfg.width;
+ info->var.height = cfg->lcd_size_cfg.height;
info->var.activate = FB_ACTIVATE_NOW;
error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
if (error)
#define _VERMILION_H_
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/pci.h>
#include <asm/atomic.h>
#include <linux/mutex.h>
* (http://davesdomain.org.uk/viafb/)
*/
-#include <linux/version.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
writel(wdt_count, wdt_base + S3C2410_WTCNT);
writel(wtcon, wdt_base + S3C2410_WTCON);
spin_unlock(&wdt_lock);
-
- return 0;
}
static int s3c2410wdt_set_heartbeat(int timeout)
/* Stash our initial stack pointer into the mm structure */
current->mm->start_stack = (unsigned long )sp;
-
+#ifdef FLAT_PLAT_INIT
+ FLAT_PLAT_INIT(regs);
+#endif
DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
(int)regs, (int)start_addr, (int)current->mm->start_stack);
if (bprm->misc_bang)
goto _ret;
- bprm->misc_bang = 1;
-
/* to keep locking time low, we copy the interpreter string */
read_lock(&entries_lock);
fmt = check_file(bprm);
if (retval < 0)
goto _error;
+ bprm->misc_bang = 1;
+
retval = search_binary_handler (bprm, regs);
if (retval < 0)
goto _error;
if (inode)
iput(inode);
+ cifs_umount(sb, cifs_sb);
+
out_mount_failed:
if (cifs_sb) {
#ifdef CONFIG_CIFS_DFS_UPCALL
inode->i_fop = &simple_dir_operations;
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
+ } else if (rc) {
_FreeXid(xid);
iget_failed(inode);
return ERR_PTR(rc);
static int cramfs_iget5_test(struct inode *inode, void *opaque)
{
struct cramfs_inode *cramfs_inode = opaque;
-
- if (inode->i_ino != CRAMINO(cramfs_inode))
- return 0; /* does not match */
-
- if (inode->i_ino != 1)
- return 1;
-
- /* all empty directories, char, block, pipe, and sock, share inode #1 */
-
- if ((inode->i_mode != cramfs_inode->mode) ||
- (inode->i_gid != cramfs_inode->gid) ||
- (inode->i_uid != cramfs_inode->uid))
- return 0; /* does not match */
-
- if ((S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) &&
- (inode->i_rdev != old_decode_dev(cramfs_inode->size)))
- return 0; /* does not match */
-
- return 1; /* matches */
+ return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
}
static int cramfs_iget5_set(struct inode *inode, void *opaque)
{
- static struct timespec zerotime;
struct cramfs_inode *cramfs_inode = opaque;
- inode->i_mode = cramfs_inode->mode;
- inode->i_uid = cramfs_inode->uid;
- inode->i_size = cramfs_inode->size;
- inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
- inode->i_gid = cramfs_inode->gid;
- /* Struct copy intentional */
- inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
inode->i_ino = CRAMINO(cramfs_inode);
- /* inode->i_nlink is left 1 - arguably wrong for directories,
- but it's the best we can do without reading the directory
- contents. 1 yields the right result in GNU find, even
- without -noleaf option. */
- if (S_ISREG(inode->i_mode)) {
- inode->i_fop = &generic_ro_fops;
- inode->i_data.a_ops = &cramfs_aops;
- } else if (S_ISDIR(inode->i_mode)) {
- inode->i_op = &cramfs_dir_inode_operations;
- inode->i_fop = &cramfs_directory_operations;
- } else if (S_ISLNK(inode->i_mode)) {
- inode->i_op = &page_symlink_inode_operations;
- inode->i_data.a_ops = &cramfs_aops;
- } else {
- inode->i_size = 0;
- inode->i_blocks = 0;
- init_special_inode(inode, inode->i_mode,
- old_decode_dev(cramfs_inode->size));
- }
return 0;
}
struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
cramfs_iget5_test, cramfs_iget5_set,
cramfs_inode);
+ static struct timespec zerotime;
+
if (inode && (inode->i_state & I_NEW)) {
+ inode->i_mode = cramfs_inode->mode;
+ inode->i_uid = cramfs_inode->uid;
+ inode->i_size = cramfs_inode->size;
+ inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+ inode->i_gid = cramfs_inode->gid;
+ /* Struct copy intentional */
+ inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+ /* inode->i_nlink is left 1 - arguably wrong for directories,
+ but it's the best we can do without reading the directory
+ contents. 1 yields the right result in GNU find, even
+ without -noleaf option. */
+ if (S_ISREG(inode->i_mode)) {
+ inode->i_fop = &generic_ro_fops;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else if (S_ISDIR(inode->i_mode)) {
+ inode->i_op = &cramfs_dir_inode_operations;
+ inode->i_fop = &cramfs_directory_operations;
+ } else if (S_ISLNK(inode->i_mode)) {
+ inode->i_op = &page_symlink_inode_operations;
+ inode->i_data.a_ops = &cramfs_aops;
+ } else {
+ inode->i_size = 0;
+ inode->i_blocks = 0;
+ init_special_inode(inode, inode->i_mode,
+ old_decode_dev(cramfs_inode->size));
+ }
unlock_new_inode(inode);
}
return inode;
}
+static void cramfs_drop_inode(struct inode *inode)
+{
+ if (inode->i_ino == 1)
+ generic_delete_inode(inode);
+ else
+ generic_drop_inode(inode);
+}
+
/*
* We have our own block cache: don't fill up the buffer cache
* with the rom-image, because the way the filesystem is set
.put_super = cramfs_put_super,
.remount_fs = cramfs_remount,
.statfs = cramfs_statfs,
+ .drop_inode = cramfs_drop_inode,
};
static int cramfs_get_sb(struct file_system_type *fs_type,
free_blocks =
percpu_counter_sum_and_set(&sbi->s_freeblocks_counter);
#endif
+ if (free_blocks <= root_blocks)
+ /* we don't have free space */
+ return 0;
if (free_blocks - root_blocks < nblocks)
return free_blocks - root_blocks;
return nblocks;
get_dtype(sb, fname->file_type));
if (error) {
filp->f_pos = curr_pos;
- info->extra_fname = fname->next;
+ info->extra_fname = fname;
return error;
}
fname = fname->next;
* If there are any leftover names on the hash collision
* chain, return them first.
*/
- if (info->extra_fname &&
- call_filldir(filp, dirent, filldir, info->extra_fname))
- goto finished;
+ if (info->extra_fname) {
+ if (call_filldir(filp, dirent, filldir, info->extra_fname))
+ goto finished;
- if (!info->curr_node)
+ info->extra_fname = NULL;
+ info->curr_node = rb_next(info->curr_node);
+ if (!info->curr_node) {
+ if (info->next_hash == ~0) {
+ filp->f_pos = EXT4_HTREE_EOF;
+ goto finished;
+ }
+ info->curr_hash = info->next_hash;
+ info->curr_minor_hash = 0;
+ }
+ } else if (!info->curr_node)
info->curr_node = rb_first(&info->root);
while (1) {
extern void ext4_get_inode_flags(struct ext4_inode_info *);
extern void ext4_set_aops(struct inode *inode);
extern int ext4_writepage_trans_blocks(struct inode *);
+extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
+extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks);
extern int ext4_block_truncate_page(handle_t *handle,
struct address_space *mapping, loff_t from);
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
/* extents.c */
extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
+extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
+ int chunk);
extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
ext4_lblk_t iblock,
unsigned long max_blocks, struct buffer_head *bh_result,
extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
extern int ext4_extent_tree_init(handle_t *, struct inode *);
-extern int ext4_ext_calc_credits_for_insert(struct inode *, struct ext4_ext_path *);
+extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
+ int num,
+ struct ext4_ext_path *path);
extern int ext4_ext_try_to_merge(struct inode *inode,
struct ext4_ext_path *path,
struct ext4_extent *);
EXT4_XATTR_TRANS_BLOCKS - 2 + \
2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+/*
+ * Define the number of metadata blocks we need to account to modify data.
+ *
+ * This include super block, inode block, quota blocks and xattr blocks
+ */
+#define EXT4_META_TRANS_BLOCKS(sb) (EXT4_XATTR_TRANS_BLOCKS + \
+ 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+
/* Delete operations potentially hit one directory's namespace plus an
* entire inode, plus arbitrary amounts of bitmap/indirection data. Be
* generous. We can grow the delete transaction later if necessary. */
}
/*
- * ext4_ext_calc_credits_for_insert:
- * This routine returns max. credits that the extent tree can consume.
- * It should be OK for low-performance paths like ->writepage()
- * To allow many writing processes to fit into a single transaction,
- * the caller should calculate credits under i_data_sem and
- * pass the actual path.
+ * ext4_ext_calc_credits_for_single_extent:
+ * This routine returns max. credits that needed to insert an extent
+ * to the extent tree.
+ * When pass the actual path, the caller should calculate credits
+ * under i_data_sem.
*/
-int ext4_ext_calc_credits_for_insert(struct inode *inode,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
struct ext4_ext_path *path)
{
- int depth, needed;
-
if (path) {
+ int depth = ext_depth(inode);
+ int ret = 0;
+
/* probably there is space in leaf? */
- depth = ext_depth(inode);
if (le16_to_cpu(path[depth].p_hdr->eh_entries)
- < le16_to_cpu(path[depth].p_hdr->eh_max))
- return 1;
- }
+ < le16_to_cpu(path[depth].p_hdr->eh_max)) {
- /*
- * given 32-bit logical block (4294967296 blocks), max. tree
- * can be 4 levels in depth -- 4 * 340^4 == 53453440000.
- * Let's also add one more level for imbalance.
- */
- depth = 5;
-
- /* allocation of new data block(s) */
- needed = 2;
+ /*
+ * There are some space in the leaf tree, no
+ * need to account for leaf block credit
+ *
+ * bitmaps and block group descriptor blocks
+ * and other metadat blocks still need to be
+ * accounted.
+ */
+ /* 1 bitmap, 1 block group descriptor */
+ ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+ }
+ }
- /*
- * tree can be full, so it would need to grow in depth:
- * we need one credit to modify old root, credits for
- * new root will be added in split accounting
- */
- needed += 1;
+ return ext4_chunk_trans_blocks(inode, nrblocks);
+}
- /*
- * Index split can happen, we would need:
- * allocate intermediate indexes (bitmap + group)
- * + change two blocks at each level, but root (already included)
- */
- needed += (depth * 2) + (depth * 2);
+/*
+ * How many index/leaf blocks need to change/allocate to modify nrblocks?
+ *
+ * if nrblocks are fit in a single extent (chunk flag is 1), then
+ * in the worse case, each tree level index/leaf need to be changed
+ * if the tree split due to insert a new extent, then the old tree
+ * index/leaf need to be updated too
+ *
+ * If the nrblocks are discontiguous, they could cause
+ * the whole tree split more than once, but this is really rare.
+ */
+int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ int index;
+ int depth = ext_depth(inode);
- /* any allocation modifies superblock */
- needed += 1;
+ if (chunk)
+ index = depth * 2;
+ else
+ index = depth * 3;
- return needed;
+ return index;
}
static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
correct_index = 1;
credits += (ext_depth(inode)) + 1;
}
-#ifdef CONFIG_QUOTA
credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
err = ext4_ext_journal_restart(handle, credits);
if (err)
/*
* probably first extent we're gonna free will be last in block
*/
- err = ext4_writepage_trans_blocks(inode) + 3;
+ err = ext4_writepage_trans_blocks(inode);
handle = ext4_journal_start(inode, err);
if (IS_ERR(handle))
return;
down_write(&EXT4_I(inode)->i_data_sem);
ext4_ext_invalidate_cache(inode);
- ext4_mb_discard_inode_preallocations(inode);
+ ext4_discard_reservation(inode);
/*
* TODO: optimization is possible here.
ext4_journal_stop(handle);
}
-/*
- * ext4_ext_writepage_trans_blocks:
- * calculate max number of blocks we could modify
- * in order to allocate new block for an inode
- */
-int ext4_ext_writepage_trans_blocks(struct inode *inode, int num)
-{
- int needed;
-
- needed = ext4_ext_calc_credits_for_insert(inode, NULL);
-
- /* caller wants to allocate num blocks, but note it includes sb */
- needed = needed * num - (num - 1);
-
-#ifdef CONFIG_QUOTA
- needed += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
- return needed;
-}
-
static void ext4_falloc_update_inode(struct inode *inode,
int mode, loff_t new_size, int update_ctime)
{
max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
- block;
/*
- * credits to insert 1 extent into extent tree + buffers to be able to
- * modify 1 super block, 1 block bitmap and 1 group descriptor.
+ * credits to insert 1 extent into extent tree
*/
- credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
+ credits = ext4_chunk_trans_blocks(inode, max_blocks);
mutex_lock(&inode->i_mutex);
retry:
while (ret >= 0 && ret < max_blocks) {
goto found_flexbg;
}
- if (best_flex < 0 ||
+ if (flex_group[best_flex].free_inodes == 0 ||
(flex_group[i].free_blocks >
flex_group[best_flex].free_blocks &&
flex_group[i].free_inodes))
#include "acl.h"
#include "ext4_extents.h"
+#define MPAGE_DA_EXTENT_TAIL 0x01
+
static inline int ext4_begin_ordered_truncate(struct inode *inode,
loff_t new_size)
{
*/
static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
{
+ if (!blocks)
+ return 0;
+
if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
return ext4_ext_calc_metadata_amount(inode, blocks);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
}
-/* Maximum number of blocks we map for direct IO at once. */
-#define DIO_MAX_BLOCKS 4096
-/*
- * Number of credits we need for writing DIO_MAX_BLOCKS:
- * We need sb + group descriptor + bitmap + inode -> 4
- * For B blocks with A block pointers per block we need:
- * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect).
- * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25.
- */
-#define DIO_CREDITS 25
-
-
/*
* The ext4_get_blocks_wrap() function try to look up the requested blocks,
* and returns if the blocks are already mapped.
return retval;
}
+/* Maximum number of blocks we map for direct IO at once. */
+#define DIO_MAX_BLOCKS 4096
+
static int ext4_get_block(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
handle_t *handle = ext4_journal_current_handle();
int ret = 0, started = 0;
unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+ int dio_credits;
if (create && !handle) {
/* Direct IO write... */
if (max_blocks > DIO_MAX_BLOCKS)
max_blocks = DIO_MAX_BLOCKS;
- handle = ext4_journal_start(inode, DIO_CREDITS +
- 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb));
+ dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+ handle = ext4_journal_start(inode, dio_credits);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
goto out;
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
int total, mdb, mdb_free, release;
+ if (!to_free)
+ return; /* Nothing to release, exit */
+
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+
+ if (!EXT4_I(inode)->i_reserved_data_blocks) {
+ /*
+ * if there is no reserved blocks, but we try to free some
+ * then the counter is messed up somewhere.
+ * but since this function is called from invalidate
+ * page, it's harmless to return without any action
+ */
+ printk(KERN_INFO "ext4 delalloc try to release %d reserved "
+ "blocks for inode %lu, but there is no reserved "
+ "data blocks\n", to_free, inode->i_ino);
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ return;
+ }
+
/* recalculate the number of metablocks still need to be reserved */
total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
mdb = ext4_calc_metadata_amount(inode, total);
unsigned long first_page, next_page; /* extent of pages */
get_block_t *get_block;
struct writeback_control *wbc;
+ int io_done;
+ long pages_written;
};
/*
* mpage_da_submit_io - walks through extent of pages and try to write
- * them with __mpage_writepage()
+ * them with writepage() call back
*
* @mpd->inode: inode
* @mpd->first_page: first page of the extent
static int mpage_da_submit_io(struct mpage_da_data *mpd)
{
struct address_space *mapping = mpd->inode->i_mapping;
- struct mpage_data mpd_pp = {
- .bio = NULL,
- .last_block_in_bio = 0,
- .get_block = mpd->get_block,
- .use_writepage = 1,
- };
int ret = 0, err, nr_pages, i;
unsigned long index, end;
struct pagevec pvec;
BUG_ON(mpd->next_page <= mpd->first_page);
-
pagevec_init(&pvec, 0);
index = mpd->first_page;
end = mpd->next_page - 1;
break;
index++;
- err = __mpage_writepage(page, mpd->wbc, &mpd_pp);
-
+ err = mapping->a_ops->writepage(page, mpd->wbc);
+ if (!err)
+ mpd->pages_written++;
/*
* In error case, we have to continue because
* remaining pages are still locked
}
pagevec_release(&pvec);
}
- if (mpd_pp.bio)
- mpage_bio_submit(WRITE, mpd_pp.bio);
-
return ret;
}
int blocks = exbh->b_size >> inode->i_blkbits;
sector_t pblock = exbh->b_blocknr, cur_logical;
struct buffer_head *head, *bh;
- unsigned long index, end;
+ pgoff_t index, end;
struct pagevec pvec;
int nr_pages, i;
if (buffer_delay(bh)) {
bh->b_blocknr = pblock;
clear_buffer_delay(bh);
+ bh->b_bdev = inode->i_sb->s_bdev;
+ } else if (buffer_unwritten(bh)) {
+ bh->b_blocknr = pblock;
+ clear_buffer_unwritten(bh);
+ set_buffer_mapped(bh);
+ set_buffer_new(bh);
+ bh->b_bdev = inode->i_sb->s_bdev;
} else if (buffer_mapped(bh))
BUG_ON(bh->b_blocknr != pblock);
*
* The function skips space we know is already mapped to disk blocks.
*
- * The function ignores errors ->get_block() returns, thus real
- * error handling is postponed to __mpage_writepage()
*/
static void mpage_da_map_blocks(struct mpage_da_data *mpd)
{
+ int err = 0;
struct buffer_head *lbh = &mpd->lbh;
- int err = 0, remain = lbh->b_size;
sector_t next = lbh->b_blocknr;
struct buffer_head new;
if (buffer_mapped(lbh) && !buffer_delay(lbh))
return;
- while (remain) {
- new.b_state = lbh->b_state;
- new.b_blocknr = 0;
- new.b_size = remain;
- err = mpd->get_block(mpd->inode, next, &new, 1);
- if (err) {
- /*
- * Rather than implement own error handling
- * here, we just leave remaining blocks
- * unallocated and try again with ->writepage()
- */
- break;
- }
- BUG_ON(new.b_size == 0);
+ new.b_state = lbh->b_state;
+ new.b_blocknr = 0;
+ new.b_size = lbh->b_size;
- if (buffer_new(&new))
- __unmap_underlying_blocks(mpd->inode, &new);
+ /*
+ * If we didn't accumulate anything
+ * to write simply return
+ */
+ if (!new.b_size)
+ return;
+ err = mpd->get_block(mpd->inode, next, &new, 1);
+ if (err)
+ return;
+ BUG_ON(new.b_size == 0);
- /*
- * If blocks are delayed marked, we need to
- * put actual blocknr and drop delayed bit
- */
- if (buffer_delay(lbh))
- mpage_put_bnr_to_bhs(mpd, next, &new);
+ if (buffer_new(&new))
+ __unmap_underlying_blocks(mpd->inode, &new);
- /* go for the remaining blocks */
- next += new.b_size >> mpd->inode->i_blkbits;
- remain -= new.b_size;
- }
+ /*
+ * If blocks are delayed marked, we need to
+ * put actual blocknr and drop delayed bit
+ */
+ if (buffer_delay(lbh) || buffer_unwritten(lbh))
+ mpage_put_bnr_to_bhs(mpd, next, &new);
+
+ return;
}
-#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay))
+#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
+ (1 << BH_Delay) | (1 << BH_Unwritten))
/*
* mpage_add_bh_to_extent - try to add one more block to extent of blocks
static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
sector_t logical, struct buffer_head *bh)
{
- struct buffer_head *lbh = &mpd->lbh;
sector_t next;
+ size_t b_size = bh->b_size;
+ struct buffer_head *lbh = &mpd->lbh;
+ int nrblocks = lbh->b_size >> mpd->inode->i_blkbits;
- next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits);
-
+ /* check if thereserved journal credits might overflow */
+ if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+ if (nrblocks >= EXT4_MAX_TRANS_DATA) {
+ /*
+ * With non-extent format we are limited by the journal
+ * credit available. Total credit needed to insert
+ * nrblocks contiguous blocks is dependent on the
+ * nrblocks. So limit nrblocks.
+ */
+ goto flush_it;
+ } else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
+ EXT4_MAX_TRANS_DATA) {
+ /*
+ * Adding the new buffer_head would make it cross the
+ * allowed limit for which we have journal credit
+ * reserved. So limit the new bh->b_size
+ */
+ b_size = (EXT4_MAX_TRANS_DATA - nrblocks) <<
+ mpd->inode->i_blkbits;
+ /* we will do mpage_da_submit_io in the next loop */
+ }
+ }
/*
* First block in the extent
*/
if (lbh->b_size == 0) {
lbh->b_blocknr = logical;
- lbh->b_size = bh->b_size;
+ lbh->b_size = b_size;
lbh->b_state = bh->b_state & BH_FLAGS;
return;
}
+ next = lbh->b_blocknr + nrblocks;
/*
* Can we merge the block to our big extent?
*/
if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) {
- lbh->b_size += bh->b_size;
+ lbh->b_size += b_size;
return;
}
+flush_it:
/*
* We couldn't merge the block to our extent, so we
* need to flush current extent and start new one
*/
mpage_da_map_blocks(mpd);
-
- /*
- * Now start a new extent
- */
- lbh->b_size = bh->b_size;
- lbh->b_state = bh->b_state & BH_FLAGS;
- lbh->b_blocknr = logical;
+ mpage_da_submit_io(mpd);
+ mpd->io_done = 1;
+ return;
}
/*
struct buffer_head *bh, *head, fake;
sector_t logical;
+ if (mpd->io_done) {
+ /*
+ * Rest of the page in the page_vec
+ * redirty then and skip then. We will
+ * try to to write them again after
+ * starting a new transaction
+ */
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return MPAGE_DA_EXTENT_TAIL;
+ }
/*
* Can we merge this page to current extent?
*/
if (mpd->next_page != page->index) {
/*
* Nope, we can't. So, we map non-allocated blocks
- * and start IO on them using __mpage_writepage()
+ * and start IO on them using writepage()
*/
if (mpd->next_page != mpd->first_page) {
mpage_da_map_blocks(mpd);
mpage_da_submit_io(mpd);
+ /*
+ * skip rest of the page in the page_vec
+ */
+ mpd->io_done = 1;
+ redirty_page_for_writepage(wbc, page);
+ unlock_page(page);
+ return MPAGE_DA_EXTENT_TAIL;
}
/*
set_buffer_dirty(bh);
set_buffer_uptodate(bh);
mpage_add_bh_to_extent(mpd, logical, bh);
+ if (mpd->io_done)
+ return MPAGE_DA_EXTENT_TAIL;
} else {
/*
* Page with regular buffer heads, just add all dirty ones
bh = head;
do {
BUG_ON(buffer_locked(bh));
- if (buffer_dirty(bh))
+ if (buffer_dirty(bh) &&
+ (!buffer_mapped(bh) || buffer_delay(bh))) {
mpage_add_bh_to_extent(mpd, logical, bh);
+ if (mpd->io_done)
+ return MPAGE_DA_EXTENT_TAIL;
+ }
logical++;
} while ((bh = bh->b_this_page) != head);
}
*
* This is a library function, which implements the writepages()
* address_space_operation.
- *
- * In order to avoid duplication of logic that deals with partial pages,
- * multiple bio per page, etc, we find non-allocated blocks, allocate
- * them with minimal calls to ->get_block() and re-use __mpage_writepage()
- *
- * It's important that we call __mpage_writepage() only once for each
- * involved page, otherwise we'd have to implement more complicated logic
- * to deal with pages w/o PG_lock or w/ PG_writeback and so on.
- *
- * See comments to mpage_writepages()
*/
static int mpage_da_writepages(struct address_space *mapping,
struct writeback_control *wbc,
get_block_t get_block)
{
struct mpage_da_data mpd;
+ long to_write;
int ret;
if (!get_block)
mpd.first_page = 0;
mpd.next_page = 0;
mpd.get_block = get_block;
+ mpd.io_done = 0;
+ mpd.pages_written = 0;
+
+ to_write = wbc->nr_to_write;
ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd);
/*
* Handle last extent of pages
*/
- if (mpd.next_page != mpd.first_page) {
+ if (!mpd.io_done && mpd.next_page != mpd.first_page) {
mpage_da_map_blocks(&mpd);
mpage_da_submit_io(&mpd);
}
+ wbc->nr_to_write = to_write - mpd.pages_written;
return ret;
}
}
/*
- * For now just follow the DIO way to estimate the max credits
- * needed to write out EXT4_MAX_WRITEBACK_PAGES.
- * todo: need to calculate the max credits need for
- * extent based files, currently the DIO credits is based on
- * indirect-blocks mapping way.
- *
- * Probably should have a generic way to calculate credits
- * for DIO, writepages, and truncate
+ * This is called via ext4_da_writepages() to
+ * calulate the total number of credits to reserve to fit
+ * a single extent allocation into a single transaction,
+ * ext4_da_writpeages() will loop calling this before
+ * the block allocation.
*/
-#define EXT4_MAX_WRITEBACK_PAGES DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS DIO_CREDITS
+
+static int ext4_da_writepages_trans_blocks(struct inode *inode)
+{
+ int max_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+
+ /*
+ * With non-extent format the journal credit needed to
+ * insert nrblocks contiguous block is dependent on
+ * number of contiguous block. So we will limit
+ * number of contiguous block to a sane value
+ */
+ if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+ (max_blocks > EXT4_MAX_TRANS_DATA))
+ max_blocks = EXT4_MAX_TRANS_DATA;
+
+ return ext4_chunk_trans_blocks(inode, max_blocks);
+}
static int ext4_da_writepages(struct address_space *mapping,
- struct writeback_control *wbc)
+ struct writeback_control *wbc)
{
- struct inode *inode = mapping->host;
handle_t *handle = NULL;
- int needed_blocks;
- int ret = 0;
- long to_write;
loff_t range_start = 0;
+ struct inode *inode = mapping->host;
+ int needed_blocks, ret = 0, nr_to_writebump = 0;
+ long to_write, pages_skipped = 0;
+ struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
/*
* No pages to write? This is mainly a kludge to avoid starting
* a transaction for special inodes like journal inode on last iput()
* because that could violate lock ordering on umount
*/
- if (!mapping->nrpages)
+ if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
return 0;
-
/*
- * Estimate the worse case needed credits to write out
- * EXT4_MAX_BUF_BLOCKS pages
+ * Make sure nr_to_write is >= sbi->s_mb_stream_request
+ * This make sure small files blocks are allocated in
+ * single attempt. This ensure that small files
+ * get less fragmented.
*/
- needed_blocks = EXT4_MAX_WRITEBACK_CREDITS;
+ if (wbc->nr_to_write < sbi->s_mb_stream_request) {
+ nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
+ wbc->nr_to_write = sbi->s_mb_stream_request;
+ }
- to_write = wbc->nr_to_write;
- if (!wbc->range_cyclic) {
+ if (!wbc->range_cyclic)
/*
* If range_cyclic is not set force range_cont
* and save the old writeback_index
*/
wbc->range_cont = 1;
- range_start = wbc->range_start;
- }
- while (!ret && to_write) {
+ range_start = wbc->range_start;
+ pages_skipped = wbc->pages_skipped;
+
+restart_loop:
+ to_write = wbc->nr_to_write;
+ while (!ret && to_write > 0) {
+
+ /*
+ * we insert one extent at a time. So we need
+ * credit needed for single extent allocation.
+ * journalled mode is currently not supported
+ * by delalloc
+ */
+ BUG_ON(ext4_should_journal_data(inode));
+ needed_blocks = ext4_da_writepages_trans_blocks(inode);
+
/* start a new transaction*/
handle = ext4_journal_start(inode, needed_blocks);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
+ printk(KERN_EMERG "%s: jbd2_start: "
+ "%ld pages, ino %lu; err %d\n", __func__,
+ wbc->nr_to_write, inode->i_ino, ret);
+ dump_stack();
goto out_writepages;
}
if (ext4_should_order_data(inode)) {
/*
* With ordered mode we need to add
- * the inode to the journal handle
+ * the inode to the journal handl
* when we do block allocation.
*/
ret = ext4_jbd2_file_inode(handle, inode);
ext4_journal_stop(handle);
goto out_writepages;
}
-
}
- /*
- * set the max dirty pages could be write at a time
- * to fit into the reserved transaction credits
- */
- if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES)
- wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES;
to_write -= wbc->nr_to_write;
ret = mpage_da_writepages(mapping, wbc,
- ext4_da_get_block_write);
+ ext4_da_get_block_write);
ext4_journal_stop(handle);
- if (wbc->nr_to_write) {
+ if (ret == MPAGE_DA_EXTENT_TAIL) {
+ /*
+ * got one extent now try with
+ * rest of the pages
+ */
+ to_write += wbc->nr_to_write;
+ ret = 0;
+ } else if (wbc->nr_to_write) {
/*
* There is no more writeout needed
* or we requested for a noblocking writeout
wbc->nr_to_write = to_write;
}
-out_writepages:
- wbc->nr_to_write = to_write;
- if (range_start)
+ if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) {
+ /* We skipped pages in this loop */
wbc->range_start = range_start;
+ wbc->nr_to_write = to_write +
+ wbc->pages_skipped - pages_skipped;
+ wbc->pages_skipped = pages_skipped;
+ goto restart_loop;
+ }
+
+out_writepages:
+ wbc->nr_to_write = to_write - nr_to_writebump;
+ wbc->range_start = range_start;
return ret;
}
* modify the block allocation tree.
*/
down_write(&ei->i_data_sem);
+
+ ext4_discard_reservation(inode);
+
/*
* The orphan list entry will now protect us from any crash which
* occurs before the truncate completes, so it is now safe to propagate
;
}
- ext4_discard_reservation(inode);
-
up_write(&ei->i_data_sem);
inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
ext4_mark_inode_dirty(handle, inode);
return 0;
}
+static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
+ int chunk)
+{
+ int indirects;
+
+ /* if nrblocks are contiguous */
+ if (chunk) {
+ /*
+ * With N contiguous data blocks, it need at most
+ * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
+ * 2 dindirect blocks
+ * 1 tindirect block
+ */
+ indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
+ return indirects + 3;
+ }
+ /*
+ * if nrblocks are not contiguous, worse case, each block touch
+ * a indirect block, and each indirect block touch a double indirect
+ * block, plus a triple indirect block
+ */
+ indirects = nrblocks * 2 + 1;
+ return indirects;
+}
+
+static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+ return ext4_indirect_trans_blocks(inode, nrblocks, 0);
+ return ext4_ext_index_trans_blocks(inode, nrblocks, 0);
+}
/*
- * How many blocks doth make a writepage()?
- *
- * With N blocks per page, it may be:
- * N data blocks
- * 2 indirect block
- * 2 dindirect
- * 1 tindirect
- * N+5 bitmap blocks (from the above)
- * N+5 group descriptor summary blocks
- * 1 inode block
- * 1 superblock.
- * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files
+ * Account for index blocks, block groups bitmaps and block group
+ * descriptor blocks if modify datablocks and index blocks
+ * worse case, the indexs blocks spread over different block groups
*
- * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS
+ * If datablocks are discontiguous, they are possible to spread over
+ * different block groups too. If they are contiugous, with flexbg,
+ * they could still across block group boundary.
*
- * With ordered or writeback data it's the same, less the N data blocks.
+ * Also account for superblock, inode, quota and xattr blocks
+ */
+int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+ int groups, gdpblocks;
+ int idxblocks;
+ int ret = 0;
+
+ /*
+ * How many index blocks need to touch to modify nrblocks?
+ * The "Chunk" flag indicating whether the nrblocks is
+ * physically contiguous on disk
+ *
+ * For Direct IO and fallocate, they calls get_block to allocate
+ * one single extent at a time, so they could set the "Chunk" flag
+ */
+ idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk);
+
+ ret = idxblocks;
+
+ /*
+ * Now let's see how many group bitmaps and group descriptors need
+ * to account
+ */
+ groups = idxblocks;
+ if (chunk)
+ groups += 1;
+ else
+ groups += nrblocks;
+
+ gdpblocks = groups;
+ if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
+ groups = EXT4_SB(inode->i_sb)->s_groups_count;
+ if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
+ gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
+
+ /* bitmaps and block group descriptor blocks */
+ ret += groups + gdpblocks;
+
+ /* Blocks for super block, inode, quota and xattr blocks */
+ ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
+
+ return ret;
+}
+
+/*
+ * Calulate the total number of credits to reserve to fit
+ * the modification of a single pages into a single transaction,
+ * which may include multiple chunks of block allocations.
*
- * If the inode's direct blocks can hold an integral number of pages then a
- * page cannot straddle two indirect blocks, and we can only touch one indirect
- * and dindirect block, and the "5" above becomes "3".
+ * This could be called via ext4_write_begin()
*
- * This still overestimates under most circumstances. If we were to pass the
- * start and end offsets in here as well we could do block_to_path() on each
- * block and work out the exact number of indirects which are touched. Pah.
+ * We need to consider the worse case, when
+ * one new block per extent.
*/
-
int ext4_writepage_trans_blocks(struct inode *inode)
{
int bpp = ext4_journal_blocks_per_page(inode);
- int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3;
int ret;
- if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
- return ext4_ext_writepage_trans_blocks(inode, bpp);
+ ret = ext4_meta_trans_blocks(inode, bpp, 0);
+ /* Account for data blocks for journalled mode */
if (ext4_should_journal_data(inode))
- ret = 3 * (bpp + indirects) + 2;
- else
- ret = 2 * (bpp + indirects) + 2;
-
-#ifdef CONFIG_QUOTA
- /* We know that structure was already allocated during DQUOT_INIT so
- * we will be updating only the data blocks + inodes */
- ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
+ ret += bpp;
return ret;
}
+/*
+ * Calculate the journal credits for a chunk of data modification.
+ *
+ * This is called from DIO, fallocate or whoever calling
+ * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ *
+ * journal buffers for data blocks are not included here, as DIO
+ * and fallocate do no need to journal data buffers.
+ */
+int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
+{
+ return ext4_meta_trans_blocks(inode, nrblocks, 1);
+}
+
/*
* The caller must have previously called ext4_reserve_inode_write().
* Give this, we know that the caller already has write access to iloc->bh.
mb_debug("use %u/%u from group pa %p\n", pa->pa_lstart-len, len, pa);
}
+/*
+ * Return the prealloc space that have minimal distance
+ * from the goal block. @cpa is the prealloc
+ * space that is having currently known minimal distance
+ * from the goal block.
+ */
+static struct ext4_prealloc_space *
+ext4_mb_check_group_pa(ext4_fsblk_t goal_block,
+ struct ext4_prealloc_space *pa,
+ struct ext4_prealloc_space *cpa)
+{
+ ext4_fsblk_t cur_distance, new_distance;
+
+ if (cpa == NULL) {
+ atomic_inc(&pa->pa_count);
+ return pa;
+ }
+ cur_distance = abs(goal_block - cpa->pa_pstart);
+ new_distance = abs(goal_block - pa->pa_pstart);
+
+ if (cur_distance < new_distance)
+ return cpa;
+
+ /* drop the previous reference */
+ atomic_dec(&cpa->pa_count);
+ atomic_inc(&pa->pa_count);
+ return pa;
+}
+
/*
* search goal blocks in preallocated space
*/
int order, i;
struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
struct ext4_locality_group *lg;
- struct ext4_prealloc_space *pa;
+ struct ext4_prealloc_space *pa, *cpa = NULL;
+ ext4_fsblk_t goal_block;
/* only data can be preallocated */
if (!(ac->ac_flags & EXT4_MB_HINT_DATA))
/* The max size of hash table is PREALLOC_TB_SIZE */
order = PREALLOC_TB_SIZE - 1;
+ goal_block = ac->ac_g_ex.fe_group * EXT4_BLOCKS_PER_GROUP(ac->ac_sb) +
+ ac->ac_g_ex.fe_start +
+ le32_to_cpu(EXT4_SB(ac->ac_sb)->s_es->s_first_data_block);
+ /*
+ * search for the prealloc space that is having
+ * minimal distance from the goal block.
+ */
for (i = order; i < PREALLOC_TB_SIZE; i++) {
rcu_read_lock();
list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i],
spin_lock(&pa->pa_lock);
if (pa->pa_deleted == 0 &&
pa->pa_free >= ac->ac_o_ex.fe_len) {
- atomic_inc(&pa->pa_count);
- ext4_mb_use_group_pa(ac, pa);
- spin_unlock(&pa->pa_lock);
- ac->ac_criteria = 20;
- rcu_read_unlock();
- return 1;
+
+ cpa = ext4_mb_check_group_pa(goal_block,
+ pa, cpa);
}
spin_unlock(&pa->pa_lock);
}
rcu_read_unlock();
}
+ if (cpa) {
+ ext4_mb_use_group_pa(ac, cpa);
+ ac->ac_criteria = 20;
+ return 1;
+ }
return 0;
}
* credit. But below we try to not accumalate too much
* of them by restarting the journal.
*/
- needed = ext4_ext_calc_credits_for_insert(inode, path);
+ needed = ext4_ext_calc_credits_for_single_extent(inode,
+ lb->last_block - lb->first_block + 1, path);
/*
* Make sure the credit we accumalated is not really high
if (reserved_gdb || gdb_off == 0) {
if (!EXT4_HAS_COMPAT_FEATURE(sb,
- EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+ EXT4_FEATURE_COMPAT_RESIZE_INODE)
+ || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
ext4_warning(sb, __func__,
"No reserved GDT blocks, can't resize");
return -EPERM;
#endif
ei->i_block_alloc_info = NULL;
ei->vfs_inode.i_version = 1;
+ ei->vfs_inode.i_data.writeback_index = 0;
memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
INIT_LIST_HEAD(&ei->i_prealloc_list);
spin_lock_init(&ei->i_prealloc_lock);
struct buffer_head *bh;
struct msdos_dir_entry *raw_entry;
loff_t i_pos;
- int err = 0;
+ int err;
retry:
i_pos = MSDOS_I(inode)->i_pos;
if (inode->i_ino == MSDOS_ROOT_INO || !i_pos)
return 0;
- lock_super(sb);
bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits);
if (!bh) {
printk(KERN_ERR "FAT: unable to read inode block "
"for updating (i_pos %lld)\n", i_pos);
- err = -EIO;
- goto out;
+ return -EIO;
}
spin_lock(&sbi->inode_hash_lock);
if (i_pos != MSDOS_I(inode)->i_pos) {
spin_unlock(&sbi->inode_hash_lock);
brelse(bh);
- unlock_super(sb);
goto retry;
}
}
spin_unlock(&sbi->inode_hash_lock);
mark_buffer_dirty(bh);
+ err = 0;
if (wait)
err = sync_dirty_buffer(bh);
brelse(bh);
-out:
- unlock_super(sb);
return err;
}
mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE);
mapping->assoc_mapping = NULL;
mapping->backing_dev_info = &default_backing_dev_info;
+ mapping->writeback_index = 0;
/*
* If the block_device provides a backing_dev_info for client
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
ret = set_task_ioprio(p, ioprio);
if (ret)
break;
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
pgrp = task_pgrp(current);
else
pgrp = find_vpid(who);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
tmpio = get_task_ioprio(p);
if (tmpio < 0)
continue;
ret = tmpio;
else
ret = ioprio_best(ret, tmpio);
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case IOPRIO_WHO_USER:
if (!who)
#ifndef _JFFS2_FS_I
#define _JFFS2_FS_I
-#include <linux/version.h>
#include <linux/rbtree.h>
#include <linux/posix_acl.h>
#include <linux/mutex.h>
struct buffer_head *bh;
struct omfs_sb_info *sbi = OMFS_SB(sb);
int bits_per_entry = 8 * sb->s_blocksize;
- int map, bit;
+ unsigned int map, bit;
int ret = 0;
u64 tmp;
struct omfs_sb_info *sbi = OMFS_SB(sb);
int bits_per_entry = 8 * sb->s_blocksize;
u64 tmp;
- int map, bit, ret;
+ unsigned int map, bit;
+ int ret;
tmp = block;
bit = do_div(tmp, bits_per_entry);
return err ? -EIO : 0;
}
+static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset)
+{
+ return (sbi->s_sys_blocksize - offset -
+ sizeof(struct omfs_extent)) /
+ sizeof(struct omfs_extent_entry) + 1;
+}
+
void omfs_make_empty_table(struct buffer_head *bh, int offset)
{
struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset];
struct buffer_head *bh;
u64 next, last;
u32 extent_count;
+ u32 max_extents;
int ret;
/* traverse extent table, freeing each entry that is greater
goto out;
oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
for (;;) {
- if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) {
- brelse(bh);
- goto out;
- }
+ if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next))
+ goto out_brelse;
extent_count = be32_to_cpu(oe->e_extent_count);
+
+ if (extent_count > max_extents)
+ goto out_brelse;
+
last = next;
next = be64_to_cpu(oe->e_next);
entry = &oe->e_entry;
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
}
ret = 0;
out:
return ret;
+out_brelse:
+ brelse(bh);
+ return ret;
}
static void omfs_truncate(struct inode *inode)
goto out;
}
}
- max_count = (sbi->s_sys_blocksize - OMFS_EXTENT_START -
- sizeof(struct omfs_extent)) /
- sizeof(struct omfs_extent_entry) + 1;
+ max_count = omfs_max_extents(sbi, OMFS_EXTENT_START);
/* TODO: add a continuation block here */
if (be32_to_cpu(oe->e_extent_count) > max_count-1)
sector_t next, offset;
int ret;
u64 new_block;
+ u32 max_extents;
int extent_count;
struct omfs_extent *oe;
struct omfs_extent_entry *entry;
goto out;
oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START);
next = inode->i_ino;
for (;;) {
next = be64_to_cpu(oe->e_next);
entry = &oe->e_entry;
+ if (extent_count > max_extents)
+ goto out_brelse;
+
offset = find_block(inode, entry, block, extent_count, &remain);
if (offset > 0) {
ret = 0;
if (!bh)
goto out;
oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]);
+ max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT);
}
if (create) {
ret = omfs_grow_extent(inode, oe, &new_block);
inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask);
inode->i_op = &omfs_dir_inops;
inode->i_fop = &omfs_dir_operations;
- inode->i_size = be32_to_cpu(oi->i_head.h_body_size) +
- sizeof(struct omfs_header);
+ inode->i_size = sbi->s_sys_blocksize;
inc_nlink(inode);
break;
case OMFS_FILE:
}
seq_printf(m,
- "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+ "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
vma->vm_start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
- vma->vm_pgoff << PAGE_SHIFT,
+ ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
MAJOR(dev), MINOR(dev), ino, &len);
if (file) {
ino = inode->i_ino;
}
- seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+ seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
vma->vm_start,
vma->vm_end,
flags & VM_READ ? 'r' : '-',
flags & VM_WRITE ? 'w' : '-',
flags & VM_EXEC ? 'x' : '-',
flags & VM_MAYSHARE ? 's' : 'p',
- vma->vm_pgoff << PAGE_SHIFT,
+ ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
MAJOR(dev), MINOR(dev), ino, &len);
/*
idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx;
- /* And make sure we have twice the index size of space reserved */
- idx_size <<= 1;
+ /* And make sure we have thrice the index size of space reserved */
+ idx_size = idx_size + (idx_size << 1);
/*
* We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes'
* This function makes sure UBIFS has enough free eraseblocks for index growth
* and data.
*
- * When budgeting index space, UBIFS reserves twice as more LEBs as the index
+ * When budgeting index space, UBIFS reserves thrice as many LEBs as the index
* would take if it was consolidated and written to the flash. This guarantees
* that the "in-the-gaps" commit method always succeeds and UBIFS will always
* be able to commit dirty index. So this function basically adds amount of
- * budgeted index space to the size of the current index, multiplies this by 2,
+ * budgeted index space to the size of the current index, multiplies this by 3,
* and makes sure this does not exceed the amount of free eraseblocks.
*
* Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables:
int err, idx_growth, data_growth, dd_growth;
struct retries_info ri;
+ ubifs_assert(req->new_page <= 1);
+ ubifs_assert(req->dirtied_page <= 1);
+ ubifs_assert(req->new_dent <= 1);
+ ubifs_assert(req->mod_dent <= 1);
+ ubifs_assert(req->new_ino <= 1);
+ ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
ubifs_assert(req->dirtied_ino <= 4);
ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+ ubifs_assert(!(req->new_ino_d & 7));
+ ubifs_assert(!(req->dirtied_ino_d & 7));
data_growth = calc_data_growth(c, req);
dd_growth = calc_dd_growth(c, req);
*/
void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req)
{
+ ubifs_assert(req->new_page <= 1);
+ ubifs_assert(req->dirtied_page <= 1);
+ ubifs_assert(req->new_dent <= 1);
+ ubifs_assert(req->mod_dent <= 1);
+ ubifs_assert(req->new_ino <= 1);
+ ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA);
ubifs_assert(req->dirtied_ino <= 4);
ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4);
+ ubifs_assert(!(req->new_ino_d & 7));
+ ubifs_assert(!(req->dirtied_ino_d & 7));
if (!req->recalculate) {
ubifs_assert(req->idx_growth >= 0);
ubifs_assert(req->data_growth >= 0);
ubifs_assert(c->budg_idx_growth >= 0);
ubifs_assert(c->budg_data_growth >= 0);
+ ubifs_assert(c->budg_dd_growth >= 0);
ubifs_assert(c->min_idx_lebs < c->main_lebs);
+ ubifs_assert(!(c->budg_idx_growth & 7));
+ ubifs_assert(!(c->budg_data_growth & 7));
+ ubifs_assert(!(c->budg_dd_growth & 7));
spin_unlock(&c->space_lock);
}
void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
struct ubifs_inode *ui)
{
- struct ubifs_budget_req req = {.dd_growth = c->inode_budget,
- .dirtied_ino_d = ui->data_len};
+ struct ubifs_budget_req req;
+ memset(&req, 0, sizeof(struct ubifs_budget_req));
+ req.dd_growth = c->inode_budget + ALIGN(ui->data_len, 8);
ubifs_release_budget(c, &req);
}
goto out_up;
}
+ c->cmt_no += 1;
err = ubifs_gc_start_commit(c);
if (err)
goto out_up;
goto out;
mutex_lock(&c->mst_mutex);
- c->mst_node->cmt_no = cpu_to_le64(++c->cmt_no);
+ c->mst_node->cmt_no = cpu_to_le64(c->cmt_no);
c->mst_node->log_lnum = cpu_to_le32(new_ltail_lnum);
c->mst_node->root_lnum = cpu_to_le32(zroot.lnum);
c->mst_node->root_offs = cpu_to_le32(zroot.offs);
void dbg_dump_lstats(const struct ubifs_lp_stats *lst)
{
spin_lock(&dbg_lock);
- printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs %d\n",
- lst->empty_lebs, lst->idx_lebs);
+ printk(KERN_DEBUG "(pid %d) Lprops statistics: empty_lebs %d, "
+ "idx_lebs %d\n", current->pid, lst->empty_lebs, lst->idx_lebs);
printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, "
"total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free,
lst->total_dirty);
struct ubifs_gced_idx_leb *idx_gc;
spin_lock(&dbg_lock);
- printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, "
- "budg_dd_growth %lld, budg_idx_growth %lld\n",
+ printk(KERN_DEBUG "(pid %d) Budgeting info: budg_data_growth %lld, "
+ "budg_dd_growth %lld, budg_idx_growth %lld\n", current->pid,
c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth);
printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, "
"freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth,
struct ubifs_lprops lp;
struct ubifs_lp_stats lst;
- printk(KERN_DEBUG "Dumping LEB properties\n");
+ printk(KERN_DEBUG "(pid %d) Dumping LEB properties\n", current->pid);
ubifs_get_lp_stats(c, &lst);
dbg_dump_lstats(&lst);
if (dbg_failure_mode)
return;
- printk(KERN_DEBUG "Dumping LEB %d\n", lnum);
+ printk(KERN_DEBUG "(pid %d) Dumping LEB %d\n", current->pid, lnum);
sleb = ubifs_scan(c, lnum, 0, c->dbg_buf);
if (IS_ERR(sleb)) {
{
int i;
- printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n",
- cat, heap->cnt);
+ printk(KERN_DEBUG "(pid %d) Dumping heap cat %d (%d elements)\n",
+ current->pid, cat, heap->cnt);
for (i = 0; i < heap->cnt; i++) {
struct ubifs_lprops *lprops = heap->arr[i];
{
int i;
- printk(KERN_DEBUG "Dumping pnode:\n");
+ printk(KERN_DEBUG "(pid %d) Dumping pnode:\n", current->pid);
printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n",
(size_t)pnode, (size_t)parent, (size_t)pnode->cnext);
printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n",
int level;
printk(KERN_DEBUG "\n");
- printk(KERN_DEBUG "Dumping the TNC tree\n");
+ printk(KERN_DEBUG "(pid %d) Dumping the TNC tree\n", current->pid);
znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL);
level = znode->level;
printk(KERN_DEBUG "== Level %d ==\n", level);
int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
int offset, int len, int dtype)
{
- int err;
+ int err, failing;
if (in_failure_mode(desc))
return -EIO;
- if (do_fail(desc, lnum, 1))
+ failing = do_fail(desc, lnum, 1);
+ if (failing)
cut_data(buf, len);
err = ubi_leb_write(desc, lnum, buf, offset, len, dtype);
if (err)
return err;
- if (in_failure_mode(desc))
+ if (failing)
return -EIO;
return 0;
}
#define UBIFS_DBG(op) op
-#define ubifs_assert(expr) do { \
+#define ubifs_assert(expr) do { \
if (unlikely(!(expr))) { \
printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
__func__, __LINE__, current->pid); \
const union ubifs_key *key);
/*
- * DBGKEY macros require dbg_lock to be held, which it is in the dbg message
+ * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message
* macros.
*/
#define DBGKEY(key) dbg_key_str0(c, (key))
#define DBGKEY1(key) dbg_key_str1(c, (key))
/* General messages */
-#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
+#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__)
/* Additional journal messages */
-#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__)
/* Additional TNC messages */
-#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__)
/* Additional lprops messages */
-#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__)
/* Additional LEB find messages */
-#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__)
/* Additional mount messages */
-#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__)
/* Additional I/O messages */
-#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__)
/* Additional commit messages */
-#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__)
/* Additional budgeting messages */
-#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__)
/* Additional log messages */
-#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__)
/* Additional gc messages */
-#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__)
/* Additional scan messages */
-#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__)
/* Additional recovery messages */
-#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__)
/*
* Debugging message type flags (must match msg_type_names in debug.c).
struct ubifs_zbranch *zbr, void *priv);
typedef int (*dbg_znode_callback)(struct ubifs_info *c,
struct ubifs_znode *znode, void *priv);
-
int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb,
dbg_znode_callback znode_cb, void *priv);
/* Checking functions */
int dbg_check_lprops(struct ubifs_info *c);
-
int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot);
int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot);
-
int dbg_check_cats(struct ubifs_info *c);
-
int dbg_check_ltab(struct ubifs_info *c);
-
int dbg_check_synced_i_size(struct inode *inode);
-
int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir);
-
int dbg_check_tnc(struct ubifs_info *c, int extra);
-
int dbg_check_idx_size(struct ubifs_info *c, long long idx_size);
-
int dbg_check_filesystem(struct ubifs_info *c);
-
void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat,
int add_pos);
-
int dbg_check_lprops(struct ubifs_info *c);
int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode,
int row, int col);
#else /* !CONFIG_UBIFS_FS_DEBUG */
#define UBIFS_DBG(op)
-#define ubifs_assert(expr) ({})
-#define ubifs_assert_cmt_locked(c)
+
+/* Use "if (0)" to make compiler check arguments even if debugging is off */
+#define ubifs_assert(expr) do { \
+ if (0 && (expr)) \
+ printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \
+ __func__, __LINE__, current->pid); \
+} while (0)
+
+#define dbg_err(fmt, ...) do { \
+ if (0) \
+ ubifs_err(fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define dbg_msg(fmt, ...) do { \
+ if (0) \
+ printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n", \
+ current->pid, __func__, ##__VA_ARGS__); \
+} while (0)
+
#define dbg_dump_stack()
-#define dbg_err(fmt, ...) ({})
-#define dbg_msg(fmt, ...) ({})
-#define dbg_key(c, key, fmt, ...) ({})
-
-#define dbg_gen(fmt, ...) ({})
-#define dbg_jnl(fmt, ...) ({})
-#define dbg_tnc(fmt, ...) ({})
-#define dbg_lp(fmt, ...) ({})
-#define dbg_find(fmt, ...) ({})
-#define dbg_mnt(fmt, ...) ({})
-#define dbg_io(fmt, ...) ({})
-#define dbg_cmt(fmt, ...) ({})
-#define dbg_budg(fmt, ...) ({})
-#define dbg_log(fmt, ...) ({})
-#define dbg_gc(fmt, ...) ({})
-#define dbg_scan(fmt, ...) ({})
-#define dbg_rcvry(fmt, ...) ({})
-
-#define dbg_ntype(type) ""
-#define dbg_cstate(cmt_state) ""
-#define dbg_get_key_dump(c, key) ({})
-#define dbg_dump_inode(c, inode) ({})
-#define dbg_dump_node(c, node) ({})
-#define dbg_dump_budget_req(req) ({})
-#define dbg_dump_lstats(lst) ({})
-#define dbg_dump_budg(c) ({})
-#define dbg_dump_lprop(c, lp) ({})
-#define dbg_dump_lprops(c) ({})
-#define dbg_dump_leb(c, lnum) ({})
-#define dbg_dump_znode(c, znode) ({})
-#define dbg_dump_heap(c, heap, cat) ({})
-#define dbg_dump_pnode(c, pnode, parent, iip) ({})
-#define dbg_dump_tnc(c) ({})
-#define dbg_dump_index(c) ({})
+#define ubifs_assert_cmt_locked(c)
-#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
+#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_jnl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_tnc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_lp(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_find(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_mnt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_cmt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_budg(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_log(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_gc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_scan(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__)
+
+#define DBGKEY(key) ((char *)(key))
+#define DBGKEY1(key) ((char *)(key))
+
+#define dbg_ntype(type) ""
+#define dbg_cstate(cmt_state) ""
+#define dbg_get_key_dump(c, key) ({})
+#define dbg_dump_inode(c, inode) ({})
+#define dbg_dump_node(c, node) ({})
+#define dbg_dump_budget_req(req) ({})
+#define dbg_dump_lstats(lst) ({})
+#define dbg_dump_budg(c) ({})
+#define dbg_dump_lprop(c, lp) ({})
+#define dbg_dump_lprops(c) ({})
+#define dbg_dump_leb(c, lnum) ({})
+#define dbg_dump_znode(c, znode) ({})
+#define dbg_dump_heap(c, heap, cat) ({})
+#define dbg_dump_pnode(c, pnode, parent, iip) ({})
+#define dbg_dump_tnc(c) ({})
+#define dbg_dump_index(c) ({})
+#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0
#define dbg_old_index_check_init(c, zroot) 0
#define dbg_check_old_index(c, zroot) 0
-
#define dbg_check_cats(c) 0
-
#define dbg_check_ltab(c) 0
-
#define dbg_check_synced_i_size(inode) 0
-
#define dbg_check_dir_size(c, dir) 0
-
#define dbg_check_tnc(c, x) 0
-
#define dbg_check_idx_size(c, idx_size) 0
-
#define dbg_check_filesystem(c) 0
-
#define dbg_check_heap(c, heap, cat, add_pos) ({})
-
#define dbg_check_lprops(c) 0
#define dbg_check_lpt_nodes(c, cnode, row, col) 0
-
#define dbg_force_in_the_gaps_enabled 0
#define dbg_force_in_the_gaps() 0
-
#define dbg_failure_mode 0
#define dbg_failure_mode_registration(c) ({})
#define dbg_failure_mode_deregistration(c) ({})
}
inode->i_ino = ++c->highest_inum;
- inode->i_generation = ++c->vfs_gen;
/*
* The creation sequence number remains with this inode for its
* lifetime. All nodes for this inode have a greater sequence number,
err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name);
if (err) {
- /*
- * Do not hash the direntry if parent 'i_nlink' is zero, because
- * this has side-effects - '->delete_inode()' call will not be
- * called for the parent orphan inode, because 'd_count' of its
- * direntry will stay 1 (it'll be negative direntry I guess)
- * and prevent 'iput_final()' until the dentry is destroyed due
- * to unmount or memory pressure.
- */
- if (err == -ENOENT && dir->i_nlink != 0) {
+ if (err == -ENOENT) {
dbg_gen("not found");
goto done;
}
struct ubifs_inode *dir_ui = ubifs_inode(dir);
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
/*
* Budget request settings: new direntry, changing the target inode,
struct ubifs_inode *dir_ui = ubifs_inode(dir);
struct ubifs_info *c = dir->i_sb->s_fs_info;
int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len);
- struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .dirtied_ino_d = 1 };
+ struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
int err, devlen = 0;
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = devlen, .dirtied_ino = 1 };
+ .new_ino_d = ALIGN(devlen, 8),
+ .dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
int err, len = strlen(symname);
int sz_change = CALC_DENT_SIZE(dentry->d_name.len);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = len, .dirtied_ino = 1 };
+ .new_ino_d = ALIGN(len, 8),
+ .dirtied_ino = 1 };
/*
* Budget request settings: new inode, new direntry and changing parent
struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1,
.dirtied_ino = 3 };
struct ubifs_budget_req ino_req = { .dirtied_ino = 1,
- .dirtied_ino_d = old_inode_ui->data_len };
+ .dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) };
struct timespec time;
/*
loff_t new_size = attr->ia_size;
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
struct inode *inode = dentry->d_inode;
struct ubifs_info *c = inode->i_sb->s_fs_info;
- dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid);
+ dbg_gen("ino %lu, mode %#x, ia_valid %#x",
+ inode->i_ino, inode->i_mode, attr->ia_valid);
err = inode_change_ok(inode, attr);
if (err)
return err;
if (mctime_update_needed(inode, &now)) {
int err, release;
struct ubifs_budget_req req = { .dirtied_ino = 1,
- .dirtied_ino_d = ui->data_len };
+ .dirtied_ino_d = ALIGN(ui->data_len, 8) };
err = ubifs_budget_space(c, &req);
if (err)
.fsync = ubifs_fsync,
.unlocked_ioctl = ubifs_ioctl,
.splice_read = generic_file_splice_read,
+ .splice_write = generic_file_splice_write,
#ifdef CONFIG_COMPAT
.compat_ioctl = ubifs_compat_ioctl,
#endif
idx_lp = idx_heap->arr[0];
sum = idx_lp->free + idx_lp->dirty;
/*
- * Since we reserve twice as more space for the index than it
+ * Since we reserve thrice as much space for the index than it
* actually takes, it does not make sense to pick indexing LEBs
- * with less than half LEB of dirty space.
+ * with less than, say, half LEB of dirty space. May be half is
+ * not the optimal boundary - this should be tested and
+ * checked. This boundary should determine how much we use
+ * in-the-gaps to consolidate the index comparing to how much
+ * we use garbage collector to consolidate it. The "half"
+ * criteria just feels to be fine.
*/
if (sum < min_space || sum < c->half_leb_size)
idx_lp = NULL;
#include <linux/crc32.h>
#include "ubifs.h"
+/**
+ * ubifs_ro_mode - switch UBIFS to read read-only mode.
+ * @c: UBIFS file-system description object
+ * @err: error code which is the reason of switching to R/O mode
+ */
+void ubifs_ro_mode(struct ubifs_info *c, int err)
+{
+ if (!c->ro_media) {
+ c->ro_media = 1;
+ ubifs_warn("switched to read-only mode, error %d", err);
+ dbg_dump_stack();
+ }
+}
+
/**
* ubifs_check_node - check node.
* @c: UBIFS file-system description object
* @ino: buffer in which to pack inode node
* @inode: inode to pack
* @last: indicates the last node of the group
- * @last_reference: non-zero if this is a deletion inode
*/
static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino,
- const struct inode *inode, int last,
- int last_reference)
+ const struct inode *inode, int last)
{
- int data_len = 0;
+ int data_len = 0, last_reference = !inode->i_nlink;
struct ubifs_inode *ui = ubifs_inode(inode);
ino->ch.node_type = UBIFS_INO_NODE;
ubifs_prep_grp_node(c, dent, dlen, 0);
ino = (void *)dent + aligned_dlen;
- pack_inode(c, ino, inode, 0, last_reference);
+ pack_inode(c, ino, inode, 0);
ino = (void *)ino + aligned_ilen;
- pack_inode(c, ino, dir, 1, 0);
+ pack_inode(c, ino, dir, 1);
if (last_reference) {
err = ubifs_add_orphan(c, inode->i_ino);
release_head(c, BASEHD);
goto out_finish;
}
+ ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync);
* ubifs_jnl_write_inode - flush inode to the journal.
* @c: UBIFS file-system description object
* @inode: inode to flush
- * @deletion: inode has been deleted
*
* This function writes inode @inode to the journal. If the inode is
* synchronous, it also synchronizes the write-buffer. Returns zero in case of
* success and a negative error code in case of failure.
*/
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
- int deletion)
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode)
{
- int err, len, lnum, offs, sync = 0;
+ int err, lnum, offs;
struct ubifs_ino_node *ino;
struct ubifs_inode *ui = ubifs_inode(inode);
+ int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink;
- dbg_jnl("ino %lu%s", inode->i_ino,
- deletion ? " (last reference)" : "");
- if (deletion)
- ubifs_assert(inode->i_nlink == 0);
+ dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink);
- len = UBIFS_INO_NODE_SZ;
/*
* If the inode is being deleted, do not write the attached data. No
* need to synchronize the write-buffer either.
*/
- if (!deletion) {
+ if (!last_reference) {
len += ui->data_len;
sync = IS_SYNC(inode);
}
if (err)
goto out_free;
- pack_inode(c, ino, inode, 1, deletion);
+ pack_inode(c, ino, inode, 1);
err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync);
if (err)
goto out_release;
inode->i_ino);
release_head(c, BASEHD);
- if (deletion) {
+ if (last_reference) {
err = ubifs_tnc_remove_ino(c, inode->i_ino);
if (err)
goto out_ro;
return err;
}
+/**
+ * ubifs_jnl_delete_inode - delete an inode.
+ * @c: UBIFS file-system description object
+ * @inode: inode to delete
+ *
+ * This function deletes inode @inode which includes removing it from orphans,
+ * deleting it from TNC and, in some cases, writing a deletion inode to the
+ * journal.
+ *
+ * When regular file inodes are unlinked or a directory inode is removed, the
+ * 'ubifs_jnl_update()' function writes a corresponding deletion inode and
+ * direntry to the media, and adds the inode to orphans. After this, when the
+ * last reference to this inode has been dropped, this function is called. In
+ * general, it has to write one more deletion inode to the media, because if
+ * a commit happened between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal
+ * anymore, and in fact it might not be on the flash anymore, because it might
+ * have been garbage-collected already. And for optimization reasons UBIFS does
+ * not read the orphan area if it has been unmounted cleanly, so it would have
+ * no indication in the journal that there is a deleted inode which has to be
+ * removed from TNC.
+ *
+ * However, if there was no commit between 'ubifs_jnl_update()' and
+ * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion
+ * inode to the media for the second time. And this is quite a typical case.
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode)
+{
+ int err;
+ struct ubifs_inode *ui = ubifs_inode(inode);
+
+ ubifs_assert(inode->i_nlink == 0);
+
+ if (ui->del_cmtno != c->cmt_no)
+ /* A commit happened for sure */
+ return ubifs_jnl_write_inode(c, inode);
+
+ down_read(&c->commit_sem);
+ /*
+ * Check commit number again, because the first test has been done
+ * without @c->commit_sem, so a commit might have happened.
+ */
+ if (ui->del_cmtno != c->cmt_no) {
+ up_read(&c->commit_sem);
+ return ubifs_jnl_write_inode(c, inode);
+ }
+
+ err = ubifs_tnc_remove_ino(c, inode->i_ino);
+ if (err)
+ ubifs_ro_mode(c, err);
+ else
+ ubifs_delete_orphan(c, inode->i_ino);
+ up_read(&c->commit_sem);
+ return err;
+}
+
/**
* ubifs_jnl_rename - rename a directory entry.
* @c: UBIFS file-system description object
p = (void *)dent2 + aligned_dlen2;
if (new_inode) {
- pack_inode(c, p, new_inode, 0, last_reference);
+ pack_inode(c, p, new_inode, 0);
p += ALIGN(ilen, 8);
}
if (!move)
- pack_inode(c, p, old_dir, 1, 0);
+ pack_inode(c, p, old_dir, 1);
else {
- pack_inode(c, p, old_dir, 0, 0);
+ pack_inode(c, p, old_dir, 0);
p += ALIGN(plen, 8);
- pack_inode(c, p, new_dir, 1, 0);
+ pack_inode(c, p, new_dir, 1);
}
if (last_reference) {
release_head(c, BASEHD);
goto out_finish;
}
+ new_ui->del_cmtno = c->cmt_no;
}
err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync);
if (err)
goto out_free;
- pack_inode(c, ino, inode, 0, 0);
+ pack_inode(c, ino, inode, 0);
ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1);
if (dlen)
ubifs_prep_grp_node(c, dn, dlen, 1);
ubifs_prep_grp_node(c, xent, xlen, 0);
ino = (void *)xent + aligned_xlen;
- pack_inode(c, ino, inode, 0, 1);
+ pack_inode(c, ino, inode, 0);
ino = (void *)ino + UBIFS_INO_NODE_SZ;
- pack_inode(c, ino, host, 1, 0);
+ pack_inode(c, ino, host, 1);
err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync);
if (!sync && !err)
const struct inode *host)
{
int err, len1, len2, aligned_len, aligned_len1, lnum, offs;
- struct ubifs_inode *host_ui = ubifs_inode(inode);
+ struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_ino_node *ino;
union ubifs_key key;
int sync = IS_DIRSYNC(host);
if (err)
goto out_free;
- pack_inode(c, ino, host, 0, 0);
- pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0);
+ pack_inode(c, ino, host, 0);
+ pack_inode(c, (void *)ino + aligned_len1, inode, 1);
err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0);
if (!sync && !err) {
return 0;
out_unlock:
+ if (err != -EAGAIN)
+ ubifs_ro_mode(c, err);
mutex_unlock(&c->log_mutex);
kfree(ref);
kfree(bud);
return -ENOMEM;
cs->ch.node_type = UBIFS_CS_NODE;
- cs->cmt_no = cpu_to_le64(c->cmt_no + 1);
+ cs->cmt_no = cpu_to_le64(c->cmt_no);
ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0);
/*
return container_of(inode, struct ubifs_inode, vfs_inode);
}
-/**
- * ubifs_ro_mode - switch UBIFS to read read-only mode.
- * @c: UBIFS file-system description object
- * @err: error code which is the reason of switching to R/O mode
- */
-static inline void ubifs_ro_mode(struct ubifs_info *c, int err)
-{
- if (!c->ro_media) {
- c->ro_media = 1;
- ubifs_warn("switched to read-only mode, error %d", err);
- dbg_dump_stack();
- }
-}
-
/**
* ubifs_compr_present - check if compressor was compiled in.
* @compr_type: compressor type to check
{
int divisor, factor;
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1);
+ divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
do_div(free, divisor);
c->cmt_orphans -= cnt;
spin_unlock(&c->orphan_lock);
if (c->cmt_orphans)
- orph->cmt_no = cpu_to_le64(c->cmt_no + 1);
+ orph->cmt_no = cpu_to_le64(c->cmt_no);
else
/* Mark the last node of the commit */
- orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63));
+ orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63));
ubifs_assert(c->ohead_offs + len <= c->leb_size);
ubifs_assert(c->ohead_lnum >= c->orph_first);
ubifs_assert(c->ohead_lnum <= c->orph_last);
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/ctype.h>
-#include <linux/random.h>
#include <linux/kthread.h>
#include <linux/parser.h>
#include <linux/seq_file.h>
if (err)
goto out_invalid;
- /* Disable readahead */
+ /* Disable read-ahead */
inode->i_mapping->backing_dev_info = &c->bdi;
switch (inode->i_mode & S_IFMT) {
*/
static int ubifs_write_inode(struct inode *inode, int wait)
{
- int err;
+ int err = 0;
struct ubifs_info *c = inode->i_sb->s_fs_info;
struct ubifs_inode *ui = ubifs_inode(inode);
return 0;
}
- dbg_gen("inode %lu", inode->i_ino);
- err = ubifs_jnl_write_inode(c, inode, 0);
- if (err)
- ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+ /*
+ * As an optimization, do not write orphan inodes to the media just
+ * because this is not needed.
+ */
+ dbg_gen("inode %lu, mode %#x, nlink %u",
+ inode->i_ino, (int)inode->i_mode, inode->i_nlink);
+ if (inode->i_nlink) {
+ err = ubifs_jnl_write_inode(c, inode);
+ if (err)
+ ubifs_err("can't write inode %lu, error %d",
+ inode->i_ino, err);
+ }
ui->dirty = 0;
mutex_unlock(&ui->ui_mutex);
{
int err;
struct ubifs_info *c = inode->i_sb->s_fs_info;
+ struct ubifs_inode *ui = ubifs_inode(inode);
- if (ubifs_inode(inode)->xattr)
+ if (ui->xattr)
/*
* Extended attribute inode deletions are fully handled in
* 'ubifs_removexattr()'. These inodes are special and have
*/
goto out;
- dbg_gen("inode %lu", inode->i_ino);
+ dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
ubifs_assert(!atomic_read(&inode->i_count));
ubifs_assert(inode->i_nlink == 0);
if (is_bad_inode(inode))
goto out;
- ubifs_inode(inode)->ui_size = inode->i_size = 0;
- err = ubifs_jnl_write_inode(c, inode, 1);
+ ui->ui_size = inode->i_size = 0;
+ err = ubifs_jnl_delete_inode(c, inode);
if (err)
/*
* Worst case we have a lost orphan inode wasting space, so a
- * simple error message is ok here.
+ * simple error message is OK here.
*/
- ubifs_err("can't write inode %lu, error %d", inode->i_ino, err);
+ ubifs_err("can't delete inode %lu, error %d",
+ inode->i_ino, err);
+
out:
+ if (ui->dirty)
+ ubifs_release_dirty_inode_budget(c, ui);
clear_inode(inode);
}
if (err)
goto out_infos;
- ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num,
- c->vi.vol_id);
+ ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"",
+ c->vi.ubi_num, c->vi.vol_id, c->vi.name);
if (mounted_read_only)
ubifs_msg("mounted read-only");
x = (long long)c->main_lebs * c->leb_size;
*/
ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0);
ubifs_assert(c->budg_idx_growth == 0);
+ ubifs_assert(c->budg_dd_growth == 0);
ubifs_assert(c->budg_data_growth == 0);
/*
INIT_LIST_HEAD(&c->orph_new);
c->highest_inum = UBIFS_FIRST_INO;
- get_random_bytes(&c->vfs_gen, sizeof(int));
c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM;
ubi_get_volume_info(ubi, &c->vi);
}
/*
- * UBIFS provids 'backing_dev_info' in order to disable readahead. For
+ * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For
* UBIFS, I/O is not deferred, it is done immediately in readpage,
* which means the user would have to wait not just for their own I/O
- * but the readahead I/O as well i.e. completely pointless.
+ * but the read-ahead I/O as well i.e. completely pointless.
*
* Read-ahead will be disabled because @c->bdi.ra_pages is 0.
*/
written = layout_leb_in_gaps(c, p);
if (written < 0) {
err = written;
- if (err == -ENOSPC) {
- if (!dbg_force_in_the_gaps_enabled) {
- /*
- * Do not print scary warnings if the
- * debugging option which forces
- * in-the-gaps is enabled.
- */
- ubifs_err("out of space");
- spin_lock(&c->space_lock);
- dbg_dump_budg(c);
- spin_unlock(&c->space_lock);
- dbg_dump_lprops(c);
- }
- /* Try to commit anyway */
- err = 0;
- break;
+ if (err != -ENOSPC) {
+ kfree(c->gap_lebs);
+ c->gap_lebs = NULL;
+ return err;
}
- kfree(c->gap_lebs);
- c->gap_lebs = NULL;
- return err;
+ if (!dbg_force_in_the_gaps_enabled) {
+ /*
+ * Do not print scary warnings if the debugging
+ * option which forces in-the-gaps is enabled.
+ */
+ ubifs_err("out of space");
+ spin_lock(&c->space_lock);
+ dbg_dump_budg(c);
+ spin_unlock(&c->space_lock);
+ dbg_dump_lprops(c);
+ }
+ /* Try to commit anyway */
+ err = 0;
+ break;
}
p++;
cnt -= written;
/* Minimum number of orphan area logical eraseblocks */
#define UBIFS_MIN_ORPH_LEBS 1
/*
- * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1
+ * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1
* for GC, 1 for deletions, and at least 1 for committed data).
*/
-#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5)
+#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6)
/* Minimum number of logical eraseblocks */
#define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \
* Adrian Hunter
*/
-/* Implementation version 0.7 */
-
#ifndef __UBIFS_H__
#define __UBIFS_H__
* struct ubifs_inode - UBIFS in-memory inode description.
* @vfs_inode: VFS inode description object
* @creat_sqnum: sequence number at time of creation
+ * @del_cmtno: commit number corresponding to the time the inode was deleted,
+ * protected by @c->commit_sem;
* @xattr_size: summarized size of all extended attributes in bytes
* @xattr_cnt: count of extended attributes this inode has
* @xattr_names: sum of lengths of all extended attribute names belonging to
struct ubifs_inode {
struct inode vfs_inode;
unsigned long long creat_sqnum;
+ unsigned long long del_cmtno;
unsigned int xattr_size;
unsigned int xattr_cnt;
unsigned int xattr_names;
/**
* struct ubifs_budget_req - budget requirements of an operation.
*
- * @fast: non-zero if the budgeting should try to aquire budget quickly and
+ * @fast: non-zero if the budgeting should try to acquire budget quickly and
* should not try to call write-back
* @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields
* have to be re-calculated
* An inode may contain 4KiB of data at max., thus the widths of @new_ino_d
* is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made
* dirty by the re-name operation.
+ *
+ * Note, UBIFS aligns node lengths to 8-bytes boundary, so the requester has to
+ * make sure the amount of inode data which contribute to @new_ino_d and
+ * @dirtied_ino_d fields are aligned.
*/
struct ubifs_budget_req {
unsigned int fast:1;
unsigned int recalculate:1;
+#ifndef UBIFS_DEBUG
unsigned int new_page:1;
unsigned int dirtied_page:1;
unsigned int new_dent:1;
unsigned int mod_dent:1;
unsigned int new_ino:1;
unsigned int new_ino_d:13;
-#ifndef UBIFS_DEBUG
unsigned int dirtied_ino:4;
unsigned int dirtied_ino_d:15;
#else
/* Not bit-fields to check for overflows */
+ unsigned int new_page;
+ unsigned int dirtied_page;
+ unsigned int new_dent;
+ unsigned int mod_dent;
+ unsigned int new_ino;
+ unsigned int new_ino_d;
unsigned int dirtied_ino;
unsigned int dirtied_ino_d;
#endif
* struct ubifs_info - UBIFS file-system description data structure
* (per-superblock).
* @vfs_sb: VFS @struct super_block object
- * @bdi: backing device info object to make VFS happy and disable readahead
+ * @bdi: backing device info object to make VFS happy and disable read-ahead
*
* @highest_inum: highest used inode number
- * @vfs_gen: VFS inode generation counter
* @max_sqnum: current global sequence number
- * @cmt_no: commit number (last successfully completed commit)
- * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters
+ * @cmt_no: commit number of the last successfully completed commit, protected
+ * by @commit_sem
+ * @cnt_lock: protects @highest_inum and @max_sqnum counters
* @fmt_version: UBIFS on-flash format version
* @uuid: UUID from super block
*
struct backing_dev_info bdi;
ino_t highest_inum;
- unsigned int vfs_gen;
unsigned long long max_sqnum;
unsigned long long cmt_no;
spinlock_t cnt_lock;
extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT];
/* io.c */
+void ubifs_ro_mode(struct ubifs_info *c, int err);
int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len);
int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs,
int dtype);
int deletion, int xent);
int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode,
const union ubifs_key *key, const void *buf, int len);
-int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode,
- int last_reference);
+int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode);
+int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode);
int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir,
const struct dentry *old_dentry,
const struct inode *new_dir,
/*
* Limit the number of extended attributes per inode so that the total size
- * (xattr_size) is guaranteeded to fit in an 'unsigned int'.
+ * (@xattr_size) is guaranteeded to fit in an 'unsigned int'.
*/
#define MAX_XATTRS_PER_INODE 65535
struct inode *inode;
struct ubifs_inode *ui, *host_ui = ubifs_inode(host);
struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1,
- .new_ino_d = size, .dirtied_ino = 1,
- .dirtied_ino_d = host_ui->data_len};
+ .new_ino_d = ALIGN(size, 8), .dirtied_ino = 1,
+ .dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE)
return -ENOSPC;
/*
* Linux limits the maximum size of the extended attribute names list
- * to %XATTR_LIST_MAX. This means we should not allow creating more*
+ * to %XATTR_LIST_MAX. This means we should not allow creating more
* extended attributes if the name list becomes larger. This limitation
* is artificial for UBIFS, though.
*/
goto out_budg;
}
- mutex_lock(&host_ui->ui_mutex);
/* Re-define all operations to be "nothing" */
inode->i_mapping->a_ops = &none_address_operations;
inode->i_op = &none_inode_operations;
ui->data = kmalloc(size, GFP_NOFS);
if (!ui->data) {
err = -ENOMEM;
- goto out_unlock;
+ goto out_free;
}
-
memcpy(ui->data, value, size);
+ inode->i_size = ui->ui_size = size;
+ ui->data_len = size;
+
+ mutex_lock(&host_ui->ui_mutex);
host->i_ctime = ubifs_current_time(host);
host_ui->xattr_cnt += 1;
host_ui->xattr_size += CALC_DENT_SIZE(nm->len);
host_ui->xattr_size += CALC_XATTR_BYTES(size);
host_ui->xattr_names += nm->len;
- /*
- * We do not use i_size_write() because nobody can race with us as we
- * are holding host @host->i_mutex - every xattr operation for this
- * inode is serialized by it.
- */
- inode->i_size = ui->ui_size = size;
- ui->data_len = size;
err = ubifs_jnl_update(c, host, nm, inode, 0, 1);
if (err)
goto out_cancel;
host_ui->xattr_cnt -= 1;
host_ui->xattr_size -= CALC_DENT_SIZE(nm->len);
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
-out_unlock:
mutex_unlock(&host_ui->ui_mutex);
+out_free:
make_bad_inode(inode);
iput(inode);
out_budg:
struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_inode *ui = ubifs_inode(inode);
struct ubifs_budget_req req = { .dirtied_ino = 2,
- .dirtied_ino_d = size + host_ui->data_len };
+ .dirtied_ino_d = ALIGN(size, 8) + ALIGN(host_ui->data_len, 8) };
ubifs_assert(ui->data_len == inode->i_size);
err = ubifs_budget_space(c, &req);
if (err)
return err;
- mutex_lock(&host_ui->ui_mutex);
- host->i_ctime = ubifs_current_time(host);
- host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
- host_ui->xattr_size += CALC_XATTR_BYTES(size);
-
kfree(ui->data);
ui->data = kmalloc(size, GFP_NOFS);
if (!ui->data) {
err = -ENOMEM;
- goto out_unlock;
+ goto out_free;
}
-
memcpy(ui->data, value, size);
inode->i_size = ui->ui_size = size;
ui->data_len = size;
+ mutex_lock(&host_ui->ui_mutex);
+ host->i_ctime = ubifs_current_time(host);
+ host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len);
+ host_ui->xattr_size += CALC_XATTR_BYTES(size);
+
/*
* It is important to write the host inode after the xattr inode
* because if the host inode gets synchronized (via 'fsync()'), then
out_cancel:
host_ui->xattr_size -= CALC_XATTR_BYTES(size);
host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
- make_bad_inode(inode);
-out_unlock:
mutex_unlock(&host_ui->ui_mutex);
+ make_bad_inode(inode);
+out_free:
ubifs_release_budget(c, &req);
return err;
}
dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name,
host->i_ino, dentry->d_name.len, dentry->d_name.name, size);
+ ubifs_assert(mutex_is_locked(&host->i_mutex));
if (size > UBIFS_MAX_INO_DATA)
return -ERANGE;
if (!xent)
return -ENOMEM;
- mutex_lock(&host->i_mutex);
xent_key_init(c, &key, host->i_ino, &nm);
err = ubifs_tnc_lookup_nm(c, &key, xent, &nm);
if (err) {
out_iput:
iput(inode);
out_unlock:
- mutex_unlock(&host->i_mutex);
kfree(xent);
return err;
}
return -ERANGE;
lowest_xent_key(c, &key, host->i_ino);
-
- mutex_lock(&host->i_mutex);
while (1) {
int type;
pxent = xent;
key_read(c, &xent->key, &key);
}
- mutex_unlock(&host->i_mutex);
kfree(pxent);
if (err != -ENOENT) {
int err;
struct ubifs_inode *host_ui = ubifs_inode(host);
struct ubifs_inode *ui = ubifs_inode(inode);
- struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1,
- .dirtied_ino_d = host_ui->data_len };
+ struct ubifs_budget_req req = { .dirtied_ino = 2, .mod_dent = 1,
+ .dirtied_ino_d = ALIGN(host_ui->data_len, 8) };
ubifs_assert(ui->data_len == inode->i_size);
#ifndef __XFS_DMAPI_H__
#define __XFS_DMAPI_H__
-#include <linux/version.h>
/* Values used to define the on-disk version of dm_attrname_t. All
* on-disk attribute names start with the 8-byte string "SGI_DMI_".
*
*/
u32 acpi_ns_opens_scope(acpi_object_type type);
-void
+acpi_status
acpi_ns_build_external_path(struct acpi_namespace_node *node,
acpi_size size, char *name_buffer);
*/
#ifndef __ASM_ARM_REGS_NAND
-#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $"
+#define __ASM_ARM_REGS_NAND
#define S3C2410_NFREG(x) (x)
#ifndef __ASM_ARCH_REGS_TIMER_H
-#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $"
+#define __ASM_ARCH_REGS_TIMER_H
#define S3C_TIMERREG(x) (S3C_VA_TIMER + (x))
#define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c))
#ifndef __ASM_ARCH_REGS_WATCHDOG_H
-#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $"
+#define __ASM_ARCH_REGS_WATCHDOG_H
#define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG)
extern void s3c2410_init_clocks(int xtal);
-extern int s3c2410_baseclk_add(void);
-
#else
#define s3c2410_init_clocks NULL
#define s3c2410_init_uarts NULL
#define s3c2410_map_io NULL
#define s3c2410_init NULL
#endif
+
+extern int s3c2410_baseclk_add(void);
include include/asm-generic/Kbuild.asm
-header-y += fixed_code.h
+unifdef-y += fixed_code.h
extern void dump_bfin_mem(struct pt_regs *regs);
extern void dump_bfin_trace_buffer(void);
+/* init functions only */
extern int init_arch_irq(void);
-extern void bfin_reset(void);
-extern void _cplb_hdr(void);
-/* Blackfin cache functions */
extern void bfin_icache_init(void);
extern void bfin_dcache_init(void);
-extern int read_iloc(void);
-extern int bfin_console_init(void);
-extern asmlinkage void lower_to_irq14(void);
-extern asmlinkage void bfin_return_from_exception(void);
extern void init_exception_vectors(void);
-extern void init_dma(void);
extern void program_IAR(void);
-extern void evt14_softirq(void);
+
+extern void bfin_reset(void);
+extern asmlinkage void lower_to_irq14(void);
+extern asmlinkage void bfin_return_from_exception(void);
+extern asmlinkage void evt14_softirq(void);
extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
extern int bfin_internal_set_wake(unsigned int irq, unsigned int state);
-extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
-extern char fixed_code_start;
-extern char fixed_code_end;
-extern int atomic_xchg32(void);
-extern int atomic_cas32(void);
-extern int atomic_add32(void);
-extern int atomic_sub32(void);
-extern int atomic_ior32(void);
-extern int atomic_and32(void);
-extern int atomic_xor32(void);
-extern void safe_user_instruction(void);
-extern void sigreturn_stub(void);
-
extern void *l1_data_A_sram_alloc(size_t);
extern void *l1_data_B_sram_alloc(size_t);
extern void *l1_inst_sram_alloc(size_t);
extern int sram_free_with_lsl(const void*);
extern const char bfin_board_name[];
-extern unsigned long wall_jiffies;
extern unsigned long bfin_sic_iwr[];
+extern unsigned vr_wakeup;
extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
-extern struct file_operations dpmc_fops;
extern unsigned long _ramstart, _ramend, _rambase;
extern unsigned long memory_start, memory_end, physical_mem_end;
extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
_ebss_l2[], _l2_lma_start[];
-#ifdef CONFIG_MTD_UCLINUX
+/* only used when CONFIG_MTD_UCLINUX */
extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
+
+#ifdef CONFIG_BFIN_ICACHE_LOCK
+extern void cache_grab_lock(int way);
+extern void cache_lock(int way);
#endif
#endif
#ifndef __ASSEMBLY__
void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
-void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2);
void do_hibernate(int wakeup);
/* This file defines the fixed addresses where userspace programs can find
atomic code sequences. */
+#ifndef __BFIN_ASM_FIXED_CODE_H__
+#define __BFIN_ASM_FIXED_CODE_H__
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/linkage.h>
+#include <linux/ptrace.h>
+extern asmlinkage void finish_atomic_sections(struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void safe_user_instruction(void);
+extern void sigreturn_stub(void);
+#endif
+#endif
+
#define FIXED_CODE_START 0x400
#define SIGRETURN_STUB 0x400
#define SAFE_USER_INSTRUCTION 0x480
#define FIXED_CODE_END 0x490
+
+#endif
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define SDRAM_tRCD TRCD_2
#define SDRAM_tWR TWR_2
#endif
-#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612)
+#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612)
#define SDRAM_tRP TRP_2
#define SDRAM_tRP_num 2
#define SDRAM_tRAS TRAS_5
#endif
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#endif
+/* Level 2 Memory - none */
+
+#define L2_START 0
+#define L2_LENGTH 0
+
/* Scratch Pad Memory */
#define L1_SCRATCH_START 0xFFB00000
#define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS)
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_DMEM_CONTROL(unsigned int val);
-#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
-#endif
#define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS)
#define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val)
#define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR)
#define DTEST_DATA3 0xFFE0040C
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
-#if ANOMALY_05000125
-extern void bfin_write_IMEM_CONTROL(unsigned int val);
-#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
-#endif
#define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS)
#define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val)
#define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR)
#define __NR_semtimedop 357
#define __NR_timerfd_settime 358
#define __NR_timerfd_gettime 359
+#define __NR_signalfd4 360
+#define __NR_eventfd2 361
+#define __NR_epoll_create1 362
+#define __NR_dup3 363
+#define __NR_pipe2 364
+#define __NR_inotify_init1 365
-#define __NR_syscall 360
+#define __NR_syscall 366
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
include include/asm-generic/Kbuild.asm
-header-y += arch/
header-y += arch-v10/
header-y += arch-v32/
return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
}
+#define ioremap_wc ioremap_nocache
+
extern void iounmap(void volatile __iomem *addr);
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
/* Maximum address we can use for the control code buffer */
#define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000)
-#define KEXEC_CONTROL_CODE_SIZE 4096
+#define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
#define KEXEC_ARCH KEXEC_ARCH_MIPS
return (void *) (offset | 0x20000000);
}
+#define ioremap_wc ioremap_nocache
+
static inline void iounmap(void *addr)
{
}
#define ALIAS_TABLE_ENTRY_SIZE 2
#define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *))
-/* helper macros */
-#define LOW_U32(x) ((x) & ((1ULL << 32)-1))
-
/* Length of the MMIO region for the AMD IOMMU */
#define MMIO_REGION_LENGTH 0x4000
#define MMIO_EVT_TAIL_OFFSET 0x2018
#define MMIO_STATUS_OFFSET 0x2020
+/* MMIO status bits */
+#define MMIO_STATUS_COM_WAIT_INT_MASK 0x04
+
/* feature control bits */
#define CONTROL_IOMMU_EN 0x00ULL
#define CONTROL_HT_TUN_EN 0x01ULL
#define CMD_INV_IOMMU_PAGES 0x03
#define CMD_COMPL_WAIT_STORE_MASK 0x01
+#define CMD_COMPL_WAIT_INT_MASK 0x02
#define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01
#define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02
#define DEV_ENTRY_TRANSLATION 0x01
#define DEV_ENTRY_IR 0x3d
#define DEV_ENTRY_IW 0x3e
+#define DEV_ENTRY_NO_PAGE_FAULT 0x62
#define DEV_ENTRY_EX 0x67
#define DEV_ENTRY_SYSMGT1 0x68
#define DEV_ENTRY_SYSMGT2 0x69
{
asm volatile(LOCK_PREFIX "addq %1,%0"
: "=m" (v->counter)
- : "ir" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter));
}
/**
{
asm volatile(LOCK_PREFIX "subq %1,%0"
: "=m" (v->counter)
- : "ir" (i), "m" (v->counter));
+ : "er" (i), "m" (v->counter));
}
/**
asm volatile(LOCK_PREFIX "subq %2,%0; sete %1"
: "=m" (v->counter), "=qm" (c)
- : "ir" (i), "m" (v->counter) : "memory");
+ : "er" (i), "m" (v->counter) : "memory");
return c;
}
asm volatile(LOCK_PREFIX "addq %2,%0; sets %1"
: "=m" (v->counter), "=qm" (c)
- : "ir" (i), "m" (v->counter) : "memory");
+ : "er" (i), "m" (v->counter) : "memory");
return c;
}
#define ASM_X86__BUGS_H
extern void check_bugs(void);
+
+#ifdef CONFIG_CPU_SUP_INTEL_32
int ppro_with_ram_bug(void);
+#else
+static inline int ppro_with_ram_bug(void) { return 0; }
+#endif
#endif /* ASM_X86__BUGS_H */
#define NCAPINTS 8 /* N 32-bit words worth of info */
+/*
+ * Note: If the comment begins with a quoted string, that string is used
+ * in /proc/cpuinfo instead of the macro name. If the string is "",
+ * this feature bit is not displayed in /proc/cpuinfo at all.
+ */
+
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */
#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
+#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */
#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
+#define X86_FEATURE_CMOV (0*32+15) /* CMOV instructions */
+ /* (plus FCMOVcc, FCOMI with FPU) */
#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DS (0*32+21) /* Debug Store */
+#define X86_FEATURE_CLFLSH (0*32+19) /* "clflush" CLFLUSH instruction */
+#define X86_FEATURE_DS (0*32+21) /* "dts" Debug Store */
#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
- /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
+#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE/FXRSTOR, CR4.OSFXSR */
+#define X86_FEATURE_XMM (0*32+25) /* "sse" */
+#define X86_FEATURE_XMM2 (0*32+26) /* "sse2" */
+#define X86_FEATURE_SELFSNOOP (0*32+27) /* "ss" CPU self snoop */
#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
+#define X86_FEATURE_ACC (0*32+29) /* "tm" Automatic clock control */
#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
+#define X86_FEATURE_PBE (0*32+31) /* Pending Break Enable */
/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
/* Don't duplicate feature flags which are redundant with Intel! */
#define X86_FEATURE_MP (1*32+19) /* MP Capable. */
#define X86_FEATURE_NX (1*32+20) /* Execute Disable */
#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_GBPAGES (1*32+26) /* GB pages */
+#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSAVE/FXRSTOR optimizations */
+#define X86_FEATURE_GBPAGES (1*32+26) /* "pdpe1gb" GB pages */
#define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */
#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
/* cpu types for specific tunings: */
-#define X86_FEATURE_K8 (3*32+ 4) /* Opteron, Athlon64 */
-#define X86_FEATURE_K7 (3*32+ 5) /* Athlon */
-#define X86_FEATURE_P3 (3*32+ 6) /* P3 */
-#define X86_FEATURE_P4 (3*32+ 7) /* P4 */
+#define X86_FEATURE_K8 (3*32+ 4) /* "" Opteron, Athlon64 */
+#define X86_FEATURE_K7 (3*32+ 5) /* "" Athlon */
+#define X86_FEATURE_P3 (3*32+ 6) /* "" P3 */
+#define X86_FEATURE_P4 (3*32+ 7) /* "" P4 */
#define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
#define X86_FEATURE_UP (3*32+ 9) /* smp kernel running on up */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* "" FXSAVE leaks FOP/FIP/FOP */
#define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32 (3*32+14) /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32 (3*32+15) /* sysenter in ia32 userspace */
-#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
-#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
-#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP (3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_PEBS (3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32 (3*32+14) /* "" syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32 (3*32+15) /* "" sysenter in ia32 userspace */
+#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well */
+#define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* "" Mfence synchronizes RDTSC */
+#define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* "" Lfence synchronizes RDTSC */
+#define X86_FEATURE_11AP (3*32+19) /* "" Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL (3*32+20) /* The NOPL (0F 1F) instructions */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
-#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
-#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
+#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
+#define X86_FEATURE_PCLMULQDQ (4*32+ 1) /* PCLMULQDQ instruction */
+#define X86_FEATURE_DTES64 (4*32+ 2) /* 64-bit Debug Store */
+#define X86_FEATURE_MWAIT (4*32+ 3) /* "monitor" Monitor/Mwait support */
+#define X86_FEATURE_DSCPL (4*32+ 4) /* "ds_cpl" CPL Qual. Debug Store */
+#define X86_FEATURE_VMX (4*32+ 5) /* Hardware virtualization */
+#define X86_FEATURE_SMX (4*32+ 6) /* Safer mode */
#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
+#define X86_FEATURE_SSSE3 (4*32+ 9) /* Supplemental SSE-3 */
#define X86_FEATURE_CID (4*32+10) /* Context ID */
+#define X86_FEATURE_FMA (4*32+12) /* Fused multiply-add */
#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
+#define X86_FEATURE_PDCM (4*32+15) /* Performance Capabilities */
#define X86_FEATURE_DCA (4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_1 (4*32+19) /* "sse4_1" SSE-4.1 */
+#define X86_FEATURE_XMM4_2 (4*32+20) /* "sse4_2" SSE-4.2 */
#define X86_FEATURE_X2APIC (4*32+21) /* x2APIC */
+#define X86_FEATURE_AES (4*32+25) /* AES instructions */
+#define X86_FEATURE_XSAVE (4*32+26) /* XSAVE/XRSTOR/XSETBV/XGETBV */
+#define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */
+#define X86_FEATURE_AVX (4*32+28) /* Advanced Vector Extensions */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
-#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
-#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
-#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
+#define X86_FEATURE_XSTORE (5*32+ 2) /* "rng" RNG present (xstore) */
+#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* "rng_en" RNG enabled */
+#define X86_FEATURE_XCRYPT (5*32+ 6) /* "ace" on-CPU crypto (xcrypt) */
+#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* "ace_en" on-CPU crypto enabled */
#define X86_FEATURE_ACE2 (5*32+ 8) /* Advanced Cryptography Engine v2 */
#define X86_FEATURE_ACE2_EN (5*32+ 9) /* ACE v2 enabled */
-#define X86_FEATURE_PHE (5*32+ 10) /* PadLock Hash Engine */
-#define X86_FEATURE_PHE_EN (5*32+ 11) /* PHE enabled */
-#define X86_FEATURE_PMM (5*32+ 12) /* PadLock Montgomery Multiplier */
-#define X86_FEATURE_PMM_EN (5*32+ 13) /* PMM enabled */
+#define X86_FEATURE_PHE (5*32+10) /* PadLock Hash Engine */
+#define X86_FEATURE_PHE_EN (5*32+11) /* PHE enabled */
+#define X86_FEATURE_PMM (5*32+12) /* PadLock Montgomery Multiplier */
+#define X86_FEATURE_PMM_EN (5*32+13) /* PMM enabled */
/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-#define X86_FEATURE_IBS (6*32+ 10) /* Instruction Based Sampling */
+#define X86_FEATURE_SVM (6*32+ 2) /* Secure virtual machine */
+#define X86_FEATURE_EXTAPIC (6*32+ 3) /* Extended APIC space */
+#define X86_FEATURE_CR8_LEGACY (6*32+ 4) /* CR8 in 32-bit mode */
+#define X86_FEATURE_ABM (6*32+ 5) /* Advanced bit manipulation */
+#define X86_FEATURE_SSE4A (6*32+ 6) /* SSE-4A */
+#define X86_FEATURE_MISALIGNSSE (6*32+ 7) /* Misaligned SSE mode */
+#define X86_FEATURE_3DNOWPREFETCH (6*32+ 8) /* 3DNow prefetch instructions */
+#define X86_FEATURE_OSVW (6*32+ 9) /* OS Visible Workaround */
+#define X86_FEATURE_IBS (6*32+10) /* Instruction Based Sampling */
+#define X86_FEATURE_SSE5 (6*32+11) /* SSE-5 */
+#define X86_FEATURE_SKINIT (6*32+12) /* SKINIT/STGI instructions */
+#define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */
/*
* Auxiliary flags: Linux defined - For features scattered in various
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
#define cpu_has_gbpages boot_cpu_has(X86_FEATURE_GBPAGES)
#define cpu_has_arch_perfmon boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
#define cpu_has_pat boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_1 boot_cpu_has(X86_FEATURE_XMM4_1)
+#define cpu_has_xmm4_2 boot_cpu_has(X86_FEATURE_XMM4_2)
#define cpu_has_x2apic boot_cpu_has(X86_FEATURE_X2APIC)
+#define cpu_has_xsave boot_cpu_has(X86_FEATURE_XSAVE)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
# define cpu_has_invlpg 1
#define get_uv_system_type() UV_NONE
#define is_uv_system() 0
#define uv_wakeup_secondary(a, b) 1
+#define uv_system_init() do {} while (0)
#endif /* ASM_X86__GENAPIC_32_H */
extern struct genapic apic_x2apic_uv_x;
DECLARE_PER_CPU(int, x2apic_extra_bits);
extern void uv_cpu_init(void);
+extern void uv_system_init(void);
extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
extern void setup_apic_routing(void);
#define MSR_PIC_YSEL_HIGH 0x51400021
#define MSR_PIC_ZSEL_LOW 0x51400022
#define MSR_PIC_ZSEL_HIGH 0x51400023
+#define MSR_PIC_IRQM_LPC 0x51400025
#define MSR_MFGPT_IRQ 0x51400028
#define MSR_MFGPT_NR 0x51400029
}
extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable);
-extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable);
+extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable);
extern int geode_mfgpt_alloc_timer(int timer, int domain);
#define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1)
#define build_mmio_read(name, size, type, reg, barrier) \
static inline type name(const volatile void __iomem *addr) \
-{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \
+{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \
:"m" (*(volatile type __force *)addr) barrier); return ret; }
#define build_mmio_write(name, size, type, reg, barrier) \
{ asm volatile("mov" size " %0,%1": :reg (val), \
"m" (*(volatile type __force *)addr) barrier); }
-build_mmio_read(readb, "b", unsigned char, "q", :"memory")
-build_mmio_read(readw, "w", unsigned short, "r", :"memory")
-build_mmio_read(readl, "l", unsigned int, "r", :"memory")
+build_mmio_read(readb, "b", unsigned char, "=q", :"memory")
+build_mmio_read(readw, "w", unsigned short, "=r", :"memory")
+build_mmio_read(readl, "l", unsigned int, "=r", :"memory")
-build_mmio_read(__readb, "b", unsigned char, "q", )
-build_mmio_read(__readw, "w", unsigned short, "r", )
-build_mmio_read(__readl, "l", unsigned int, "r", )
+build_mmio_read(__readb, "b", unsigned char, "=q", )
+build_mmio_read(__readw, "w", unsigned short, "=r", )
+build_mmio_read(__readl, "l", unsigned int, "=r", )
build_mmio_write(writeb, "b", unsigned char, "q", :"memory")
build_mmio_write(writew, "w", unsigned short, "r", :"memory")
#define mmiowb() barrier()
#ifdef CONFIG_X86_64
-build_mmio_read(readq, "q", unsigned long, "r", :"memory")
-build_mmio_read(__readq, "q", unsigned long, "r", )
+build_mmio_read(readq, "q", unsigned long, "=r", :"memory")
+build_mmio_read(__readq, "q", unsigned long, "=r", )
build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
build_mmio_write(__writeq, "q", unsigned long, "r", )
#define CALL_FUNCTION_SINGLE_VECTOR 0xfb
#define THERMAL_APIC_VECTOR 0xfa
#define THRESHOLD_APIC_VECTOR 0xf9
+#define UV_BAU_MESSAGE 0xf8
#define INVALIDATE_TLB_VECTOR_END 0xf7
#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */
# define PAGES_NR 17
#endif
+#ifdef CONFIG_X86_32
+# define KEXEC_CONTROL_CODE_MAX_SIZE 2048
+#endif
+
#ifndef __ASSEMBLY__
#include <linux/string.h>
/* Maximum address we can use for the control code buffer */
# define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
-# define KEXEC_CONTROL_CODE_SIZE 4096
+# define KEXEC_CONTROL_PAGE_SIZE 4096
/* The native architecture */
# define KEXEC_ARCH KEXEC_ARCH_386
# define KEXEC_CONTROL_MEMORY_LIMIT (0xFFFFFFFFFFUL)
/* Allocate one page for the pdp and the second for the code */
-# define KEXEC_CONTROL_CODE_SIZE (4096UL + 4096UL)
+# define KEXEC_CONTROL_PAGE_SIZE (4096UL + 4096UL)
/* The native architecture */
# define KEXEC_ARCH KEXEC_ARCH_X86_64
void mce_log(struct mce *m);
DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
#ifdef CONFIG_X86_MCE_INTEL
void mce_intel_feature_init(struct cpuinfo_x86 *c);
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
+#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */
#define MCL_CURRENT 1 /* lock all current mappings */
#define MCL_FUTURE 2 /* lock all future mappings */
#ifdef CONFIG_PCI_MMCONFIG
extern void __cpuinit fam10h_check_enable_mmcfg(void);
-extern void __init check_enable_amd_mmconf_dmi(void);
+extern void __cpuinit check_enable_amd_mmconf_dmi(void);
#else
static inline void fam10h_check_enable_mmcfg(void) { }
static inline void check_enable_amd_mmconf_dmi(void) { }
reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags))
#define alloc_bootmem(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_nopanic(x) \
+ __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \
+ __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0)
#define alloc_bootmem_pages(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_pages_nopanic(x) \
+ __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \
+ __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_low_pages(x) \
__alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0)
#define alloc_bootmem_node(pgdat, x) \
{
DECLARE_ARGS(val, low, high);
- asm volatile("2: rdmsr ; xor %0,%0\n"
+ asm volatile("2: rdmsr ; xor %[err],%[err]\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
- "3: mov %3,%0 ; jmp 1b\n\t"
+ "3: mov %[fault],%[err] ; jmp 1b\n\t"
".previous\n\t"
_ASM_EXTABLE(2b, 3b)
- : "=r" (*err), EAX_EDX_RET(val, low, high)
- : "c" (msr), "i" (-EFAULT));
+ : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+ : "c" (msr), [fault] "i" (-EFAULT));
return EAX_EDX_VAL(val, low, high);
}
unsigned low, unsigned high)
{
int err;
- asm volatile("2: wrmsr ; xor %0,%0\n"
+ asm volatile("2: wrmsr ; xor %[err],%[err]\n"
"1:\n\t"
".section .fixup,\"ax\"\n\t"
- "3: mov %4,%0 ; jmp 1b\n\t"
+ "3: mov %[fault],%[err] ; jmp 1b\n\t"
".previous\n\t"
_ASM_EXTABLE(2b, 3b)
- : "=a" (err)
+ : [err] "=a" (err)
: "c" (msr), "0" (low), "d" (high),
- "i" (-EFAULT)
+ [fault] "i" (-EFAULT)
: "memory");
return err;
}
#define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
#ifdef CONFIG_SMP
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-
int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
#else /* CONFIG_SMP */
-static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
{
rdmsr(msr_no, *l, *h);
+ return 0;
}
-static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
{
wrmsr(msr_no, l, h);
+ return 0;
}
static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
u32 *l, u32 *h)
DEFINE_PER_CPU(_type, _name) = _initvalue; \
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
{ [0 ... NR_CPUS-1] = _initvalue }; \
- __typeof__(_type) *_name##_early_ptr = _name##_early_map
+ __typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
EXPORT_PER_CPU_SYMBOL(_name)
#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
#define VMEMMAP_START _AC(0xffffe20000000000, UL)
#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
-#define MODULES_END _AC(0xfffffffffff00000, UL)
+#define MODULES_END _AC(0xffffffffff000000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
#ifndef __ASSEMBLY__
outb(reg, 0x22);
outb(data, 0x23);
}
+
+#define getCx86_old(reg) ({ outb((reg), 0x22); inb(0x23); })
+
+#define setCx86_old(reg, data) do { \
+ outb((reg), 0x22); \
+ outb((data), 0x23); \
+} while (0)
+
extern unsigned long idle_halt;
extern unsigned long idle_nomwait;
+/*
+ * on systems with caches, caches must be flashed as the absolute
+ * last instruction before going into a suspended halt. Otherwise,
+ * dirty data can linger in the cache and become stale on resume,
+ * leading to strange errors.
+ *
+ * perform a variety of operations to guarantee that the compiler
+ * will not reorder instructions. wbinvd itself is serializing
+ * so the processor will not reorder.
+ *
+ * Systems without cache can just go into halt.
+ */
+static inline void wbinvd_halt(void)
+{
+ mb();
+ /* check for clflush to determine if wbinvd is legal */
+ if (cpu_has_clflush)
+ asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory");
+ else
+ while (1)
+ halt();
+}
+
extern void enable_sep_cpu(void);
extern int sysenter_setup(void);
# define NEED_3DNOW 0
#endif
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL (1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL 0
+#endif
+
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
#define REQUIRED_MASK2 0
-#define REQUIRED_MASK3 0
+#define REQUIRED_MASK3 (NEED_NOPL)
#define REQUIRED_MASK4 0
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
{
int tmp = ACCESS_ONCE(lock->slock);
- return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1;
+ return (((tmp >> 8) - tmp) & 0xff) > 1;
}
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
int tmp = ACCESS_ONCE(lock->slock);
- return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1;
+ return (((tmp >> 16) - tmp) & 0xffff) > 1;
}
static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
-#define UV_BAU_MESSAGE 200
-/*
- * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
- * To be dynamically allocated in the future
- */
#define UV_NET_ENDPOINT_INTD 0x38
#define UV_DESC_BASE_PNODE_SHIFT 49
#define UV_PAYLOADQ_PNODE_SHIFT 49
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/version.h>
#include <xen/interface/xen.h>
#include <xen/interface/version.h>
unifdef-y += isdnif.h
unifdef-y += isdn_divertif.h
unifdef-y += isdn_ppp.h
+unifdef-y += ivtv.h
+unifdef-y += ivtvfb.h
unifdef-y += joystick.h
unifdef-y += kdev_t.h
unifdef-y += kd.h
ATA_MAX_SECTORS_TAPE = 65535,
ATA_ID_WORDS = 256,
+ ATA_ID_CONFIG = 0,
+ ATA_ID_CYLS = 1,
+ ATA_ID_HEADS = 3,
+ ATA_ID_SECTORS = 6,
ATA_ID_SERNO = 10,
+ ATA_ID_BUF_SIZE = 21,
ATA_ID_FW_REV = 23,
ATA_ID_PROD = 27,
+ ATA_ID_MAX_MULTSECT = 47,
+ ATA_ID_DWORD_IO = 48,
+ ATA_ID_CAPABILITY = 49,
ATA_ID_OLD_PIO_MODES = 51,
+ ATA_ID_OLD_DMA_MODES = 52,
ATA_ID_FIELD_VALID = 53,
+ ATA_ID_CUR_CYLS = 54,
+ ATA_ID_CUR_HEADS = 55,
+ ATA_ID_CUR_SECTORS = 56,
+ ATA_ID_MULTSECT = 59,
+ ATA_ID_LBA_CAPACITY = 60,
+ ATA_ID_SWDMA_MODES = 62,
ATA_ID_MWDMA_MODES = 63,
ATA_ID_PIO_MODES = 64,
ATA_ID_EIDE_DMA_MIN = 65,
+ ATA_ID_EIDE_DMA_TIME = 66,
ATA_ID_EIDE_PIO = 67,
ATA_ID_EIDE_PIO_IORDY = 68,
- ATA_ID_UDMA_MODES = 88,
+ ATA_ID_QUEUE_DEPTH = 75,
ATA_ID_MAJOR_VER = 80,
+ ATA_ID_COMMAND_SET_1 = 82,
+ ATA_ID_COMMAND_SET_2 = 83,
+ ATA_ID_CFSSE = 84,
+ ATA_ID_CFS_ENABLE_1 = 85,
+ ATA_ID_CFS_ENABLE_2 = 86,
+ ATA_ID_CSF_DEFAULT = 87,
+ ATA_ID_UDMA_MODES = 88,
+ ATA_ID_HW_CONFIG = 93,
+ ATA_ID_SPG = 98,
+ ATA_ID_LBA_CAPACITY_2 = 100,
+ ATA_ID_LAST_LUN = 126,
+ ATA_ID_DLF = 128,
+ ATA_ID_CSFO = 129,
+ ATA_ID_CFA_POWER = 160,
ATA_ID_PIO4 = (1 << 1),
ATA_ID_SERNO_LEN = 20,
ATA_BUSY = (1 << 7), /* BSY status bit */
ATA_DRDY = (1 << 6), /* device ready */
ATA_DF = (1 << 5), /* device fault */
+ ATA_DSC = (1 << 4), /* drive seek complete */
ATA_DRQ = (1 << 3), /* data request i/o */
+ ATA_CORR = (1 << 2), /* corrected data error */
+ ATA_IDX = (1 << 1), /* index */
ATA_ERR = (1 << 0), /* have an error */
ATA_SRST = (1 << 2), /* software reset */
ATA_ICRC = (1 << 7), /* interface CRC error */
+ ATA_BBK = ATA_ICRC, /* pre-EIDE: block marked bad */
ATA_UNC = (1 << 6), /* uncorrectable media error */
+ ATA_MC = (1 << 5), /* media changed */
ATA_IDNF = (1 << 4), /* ID not found */
+ ATA_MCR = (1 << 3), /* media change requested */
ATA_ABORTED = (1 << 2), /* command aborted */
+ ATA_TRK0NF = (1 << 1), /* track 0 not found */
+ ATA_AMNF = (1 << 0), /* address mark not found */
+ ATAPI_LFS = 0xF0, /* last failed sense */
+ ATAPI_EOM = ATA_TRK0NF, /* end of media */
+ ATAPI_ILI = ATA_AMNF, /* illegal length indication */
+ ATAPI_IO = (1 << 1),
+ ATAPI_COD = (1 << 0),
/* ATA command block registers */
ATA_REG_DATA = 0x00,
ATA_CMD_PMP_WRITE = 0xE8,
ATA_CMD_CONF_OVERLAY = 0xB1,
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
+ ATA_CMD_SMART = 0xB0,
+ ATA_CMD_MEDIA_LOCK = 0xDE,
+ ATA_CMD_MEDIA_UNLOCK = 0xDF,
+ /* marked obsolete in the ATA/ATAPI-7 spec */
+ ATA_CMD_RESTORE = 0x10,
+ /* EXABYTE specific */
+ ATA_EXABYTE_ENABLE_NEST = 0xF0,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
+ /* Enable/Disable Automatic Acoustic Management */
+ SETFEATURES_AAM_ON = 0x42,
+ SETFEATURES_AAM_OFF = 0xC2,
+
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
ATA_DCO_IDENTIFY = 0xC2,
ATA_DCO_SET = 0xC3,
+ /* feature values for SMART */
+ ATA_SMART_ENABLE = 0xD8,
+ ATA_SMART_READ_VALUES = 0xD0,
+ ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+ /* password used in LBA Mid / LBA High for executing SMART commands */
+ ATA_SMART_LBAM_PASS = 0x4F,
+ ATA_SMART_LBAH_PASS = 0xC2,
+
/* ATAPI stuff */
ATAPI_PKT_DMA = (1 << 0),
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
/*
* id tests
*/
-#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
-#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
-#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
+#define ata_id_is_ata(id) (((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id) ((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id) ((id)[ATA_ID_CAPABILITY] & (1 << 8))
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
-#define ata_id_removeable(id) ((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id) (((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id) ((id)[ATA_ID_CONFIG] & (1 << 7))
#define ata_id_has_atapi_AN(id) \
( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
((id)[78] & (1 << 5)) )
-#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
#define ata_id_u32(id,n) \
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
#define ata_id_u64(id,n) \
((u64) (id)[(n) + 1] << 16) | \
((u64) (id)[(n) + 0]) )
-#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
+#define ata_id_cdb_intr(id) (((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
static inline bool ata_id_has_hipm(const u16 *id)
{
static inline int ata_id_has_fua(const u16 *id)
{
- if ((id[84] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
return 0;
- return id[84] & (1 << 6);
+ return id[ATA_ID_CFSSE] & (1 << 6);
}
static inline int ata_id_has_flush(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[83] & (1 << 12);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
}
static inline int ata_id_has_flush_ext(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[83] & (1 << 13);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
}
static inline int ata_id_has_lba48(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- if (!ata_id_u64(id, 100))
+ if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
return 0;
- return id[83] & (1 << 10);
+ return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
}
static inline int ata_id_hpa_enabled(const u16 *id)
{
/* Yes children, word 83 valid bits cover word 82 data */
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
/* And 87 covers 85-87 */
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
/* Check command sets enabled as well as supported */
- if ((id[85] & ( 1 << 10)) == 0)
+ if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
return 0;
- return id[82] & (1 << 10);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
}
static inline int ata_id_has_wcache(const u16 *id)
{
/* Yes children, word 83 valid bits cover word 82 data */
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[82] & (1 << 5);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
}
static inline int ata_id_has_pm(const u16 *id)
{
- if ((id[83] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
return 0;
- return id[82] & (1 << 3);
+ return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
}
static inline int ata_id_rahead_enabled(const u16 *id)
{
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
- return id[85] & (1 << 6);
+ return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
}
static inline int ata_id_wcache_enabled(const u16 *id)
{
- if ((id[87] & 0xC000) != 0x4000)
+ if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
return 0;
- return id[85] & (1 << 5);
+ return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
}
/**
static inline int ata_id_is_sata(const u16 *id)
{
- return ata_id_major_version(id) >= 5 && id[93] == 0;
+ return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
}
static inline int ata_id_has_tpm(const u16 *id)
/* ATA 8 reuses this flag for "trusted" computing */
if (ata_id_major_version(id) > 7)
return 0;
- if (id[48] & (1 << 0))
+ if (id[ATA_ID_DWORD_IO] & (1 << 0))
return 1;
return 0;
}
{
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
has not been issued to the device then the values of
- id[54] to id[56] are vendor specific. */
- return (id[53] & 0x01) && /* Current translation valid */
- id[54] && /* cylinders in current translation */
- id[55] && /* heads in current translation */
- id[55] <= 16 &&
- id[56]; /* sectors in current translation */
+ id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+ return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+ id[ATA_ID_CUR_CYLS] && /* cylinders in current translation */
+ id[ATA_ID_CUR_HEADS] && /* heads in current translation */
+ id[ATA_ID_CUR_HEADS] <= 16 &&
+ id[ATA_ID_CUR_SECTORS]; /* sectors in current translation */
}
static inline int ata_id_is_cfa(const u16 *id)
{
- u16 v = id[0];
- if (v == 0x848A) /* Standard CF */
+ if (id[ATA_ID_CONFIG] == 0x848A) /* Standard CF */
return 1;
/* Could be CF hiding as standard ATA */
- if (ata_id_major_version(id) >= 3 && id[82] != 0xFFFF &&
- (id[82] & ( 1 << 2)))
+ if (ata_id_major_version(id) >= 3 &&
+ id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
+ (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
return 1;
return 0;
}
{
if (ata_id_is_sata(dev_id))
return 0; /* SATA */
- if ((dev_id[93] & 0xE000) == 0x6000)
+ if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
return 0; /* 80 wire */
return 1;
}
static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
{
- if ((dev_id[93] & 0x2000) == 0x2000)
+ if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
return 0; /* 80 wire */
return 1;
}
static inline int atapi_cdb_len(const u16 *dev_id)
{
- u16 tmp = dev_id[0] & 0x3;
+ u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
switch (tmp) {
case 0: return 12;
case 1: return 16;
static inline int atapi_command_packet_set(const u16 *dev_id)
{
- return (dev_id[0] >> 8) & 0x1f;
+ return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
}
static inline int atapi_id_dmadir(const u16 *dev_id)
kernel_cap_t cap_set_effective(const kernel_cap_t pE_new);
-int capable(int cap);
-int __capable(struct task_struct *t, int cap);
+/**
+ * has_capability - Determine if a task has a superior capability available
+ * @t: The task in question
+ * @cap: The capability to be tested for
+ *
+ * Return true if the specified task has the given superior capability
+ * currently in effect, false if not.
+ *
+ * Note that this does not set PF_SUPERPRIV on the task.
+ */
+#define has_capability(t, cap) (security_capable((t), (cap)) == 0)
+
+extern int capable(int cap);
#endif /* __KERNEL__ */
unsigned long timeout);
extern unsigned long wait_for_completion_interruptible_timeout(
struct completion *x, unsigned long timeout);
+extern bool try_wait_for_completion(struct completion *x);
+extern bool completion_done(struct completion *x);
extern void complete(struct completion *);
extern void complete_all(struct completion *);
#define INIT_COMPLETION(x) ((x).done = 0)
-/**
- * try_wait_for_completion - try to decrement a completion without blocking
- * @x: completion structure
- *
- * Returns: 0 if a decrement cannot be done without blocking
- * 1 if a decrement succeeded.
- *
- * If a completion is being used as a counting completion,
- * attempt to decrement the counter without blocking. This
- * enables us to avoid waiting if the resource the completion
- * is protecting is not available.
- */
-static inline bool try_wait_for_completion(struct completion *x)
-{
- int ret = 1;
-
- spin_lock_irq(&x->wait.lock);
- if (!x->done)
- ret = 0;
- else
- x->done--;
- spin_unlock_irq(&x->wait.lock);
- return ret;
-}
-
-/**
- * completion_done - Test to see if a completion has any waiters
- * @x: completion structure
- *
- * Returns: 0 if there are waiters (wait_for_completion() in progress)
- * 1 if there are no waiters.
- *
- */
-static inline bool completion_done(struct completion *x)
-{
- int ret = 1;
-
- spin_lock_irq(&x->wait.lock);
- if (!x->done)
- ret = 0;
- spin_unlock_irq(&x->wait.lock);
- return ret;
-}
-
#endif
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ const char *init_name; /* initial name of the device */
struct device_type *type;
unsigned uevent_suppress:1;
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
-static inline const char *dev_name(struct device *dev)
+static inline const char *dev_name(const struct device *dev)
{
/* will be changed into kobject_name(&dev->kobj) in the near future */
return dev->bus_id;
extern void sysdev_shutdown(void);
/* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(struct device *dev);
+extern const char *dev_driver_string(const struct device *dev);
#define dev_printk(level, dev, format, arg...) \
printk(level "%s %s: " format , dev_driver_string(dev) , \
dev_name(dev) , ## arg)
*/
FILEID_INO32_GEN_PARENT = 2,
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number.
+ */
+ FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number,
+ * 64 bit parent object ID, 32 bit parent generation.
+ */
+ FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+ /*
+ * 64 bit object ID, 64 bit root object ID,
+ * 32 bit generation number,
+ * 64 bit parent object ID, 32 bit parent generation,
+ * 64 bit parent root object ID.
+ */
+ FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
/*
* 32 bit block number, 16 bit partition reference,
* 16 bit unused, 32 bit generation number.
/* drivers/video/fb_defio.c */
extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+ struct inode *inode,
+ struct file *file);
extern void fb_deferred_io_cleanup(struct fb_info *info);
extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
int datasync);
#ifndef FS_UART_PD_H
#define FS_UART_PD_H
-#include <linux/version.h>
#include <asm/types.h>
enum fs_uart_id {
#endif
}
+/* Ftrace disable/restore without lock. Some synchronization mechanism
+ * must be used to prevent ftrace_enabled to be changed between
+ * disable/restore. */
+static inline int __ftrace_enabled_save(void)
+{
+#ifdef CONFIG_FTRACE
+ int saved_ftrace_enabled = ftrace_enabled;
+ ftrace_enabled = 0;
+ return saved_ftrace_enabled;
+#else
+ return 0;
+#endif
+}
+
+static inline void __ftrace_enabled_restore(int enabled)
+{
+#ifdef CONFIG_FTRACE
+ ftrace_enabled = enabled;
+#endif
+}
+
#ifdef CONFIG_FRAME_POINTER
/* TODO: need to fix this for ARM */
# define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
#define TUNGETFEATURES _IOR('T', 207, unsigned int)
#define TUNSETOFFLOAD _IOW('T', 208, unsigned int)
#define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF _IOR('T', 210, unsigned int)
/* TUNSETIFF ifr flags */
#define IFF_TUN 0x0001
#ifndef __LINUX_IVTV_H__
#define __LINUX_IVTV_H__
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
#include <linux/types.h>
/* ivtv knows several distinct output modes: MPEG streaming,
#ifndef __LINUX_IVTVFB_H__
#define __LINUX_IVTVFB_H__
-#ifdef __KERNEL__
-#include <linux/compiler.h> /* need __user */
-#else
-#define __user
-#endif
+#include <linux/compiler.h>
#include <linux/types.h>
/* Framebuffer external API */
#error KEXEC_CONTROL_MEMORY_LIMIT not defined
#endif
-#ifndef KEXEC_CONTROL_CODE_SIZE
-#error KEXEC_CONTROL_CODE_SIZE not defined
+#ifndef KEXEC_CONTROL_PAGE_SIZE
+#error KEXEC_CONTROL_PAGE_SIZE not defined
#endif
#ifndef KEXEC_ARCH
ATA_DEV_NONE = 9, /* no device */
/* struct ata_link flags */
+ ATA_LFLAG_NO_HRST = (1 << 1), /* avoid hardreset */
ATA_LFLAG_NO_SRST = (1 << 2), /* avoid softreset */
ATA_LFLAG_ASSUME_ATA = (1 << 3), /* assume ATA class */
ATA_LFLAG_ASSUME_SEMB = (1 << 4), /* assume SEMB class */
unsigned int flags; /* ATA_LFLAG_xxx */
+ u32 saved_scontrol; /* SControl on probe */
unsigned int hw_sata_spd_limit;
unsigned int sata_spd_limit;
unsigned int sata_spd; /* current SATA PHY speed */
return from_jiffies + msecs_to_jiffies(timeout_msecs);
}
+/* Don't open code these in drivers as there are traps. Firstly the range may
+ change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+ > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+ return 1;
+ return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+ if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+ return 1;
+ return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+ return (adev->dma_mode == 0xFF ? 0 : 1);
+}
/**************************************************************************
* PMP - drivers/ata/libata-pmp.c
#endif
/*
- * vm_flags..
+ * vm_flags in vm_area_struct, see mm_types.h.
*/
#define VM_READ 0x00000001 /* currently active flags */
#define VM_WRITE 0x00000002
struct vm_area_struct *vm_next;
pgprot_t vm_page_prot; /* Access permissions of this VMA. */
- unsigned long vm_flags; /* Flags, listed below. */
+ unsigned long vm_flags; /* Flags, see mm.h. */
struct rb_node vm_rb;
{
return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING);
}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+ /* Find root host bridge */
+ while (pdev->bus->self)
+ pdev = pdev->bus->self;
+
+ return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+ pdev->bus->number);
+}
#else
#if !defined(AE_ERROR)
typedef u32 acpi_status;
{return AE_ERROR;}
static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;}
static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{ return NULL; }
#endif
#endif /* _PCI_ACPI_H_ */
#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
+#define PCI_DEVICE_ID_INTEL_PCH_0 0x3b10
+#define PCI_DEVICE_ID_INTEL_PCH_1 0x3b11
+#define PCI_DEVICE_ID_INTEL_PCH_2 0x3b30
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0
#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5
} \
} while (0)
+#define do_each_pid_thread(pid, type, task) \
+ do_each_pid_task(pid, type, task) { \
+ struct task_struct *tg___ = task; \
+ do {
+
+#define while_each_pid_thread(pid, type, task) \
+ } while_each_thread(tg___, task); \
+ task = tg___; \
+ } while_each_pid_task(pid, type, task)
#endif /* _LINUX_PID_H */
* Architecture independent implemenations of sys_reboot commands.
*/
+extern void kernel_restart_prepare(char *cmd);
extern void kernel_restart(char *cmd);
extern void kernel_halt(void);
extern void kernel_power_off(void);
* Called from mm/filemap_xip.c to unmap empty zero page
*/
pte_t *page_check_address(struct page *, struct mm_struct *,
- unsigned long, spinlock_t **);
+ unsigned long, spinlock_t **, int);
/*
* Used by swapoff to help locate where page is expected in vma.
*/
extern int cap_capable(struct task_struct *tsk, int cap);
extern int cap_settime(struct timespec *ts, struct timezone *tz);
-extern int cap_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode);
+extern int cap_ptrace_traceme(struct task_struct *parent);
extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted);
* @alter contains the flag indicating whether changes are to be made.
* Return 0 if permission is granted.
*
- * @ptrace:
- * Check permission before allowing the @parent process to trace the
+ * @ptrace_may_access:
+ * Check permission before allowing the current process to trace the
* @child process.
* Security modules may also want to perform a process tracing check
* during an execve in the set_security or apply_creds hooks of
* binprm_security_ops if the process is being traced and its security
* attributes would be changed by the execve.
- * @parent contains the task_struct structure for parent process.
- * @child contains the task_struct structure for child process.
+ * @child contains the task_struct structure for the target process.
* @mode contains the PTRACE_MODE flags indicating the form of access.
* Return 0 if permission is granted.
+ * @ptrace_traceme:
+ * Check that the @parent process has sufficient permission to trace the
+ * current process before allowing the current process to present itself
+ * to the @parent process for tracing.
+ * The parent process will still have to undergo the ptrace_may_access
+ * checks before it is allowed to trace this one.
+ * @parent contains the task_struct structure for debugger process.
+ * Return 0 if permission is granted.
* @capget:
* Get the @effective, @inheritable, and @permitted capability sets for
* the @target process. The hook may also perform permission checking to
struct security_operations {
char name[SECURITY_NAME_MAX + 1];
- int (*ptrace) (struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+ int (*ptrace_may_access) (struct task_struct *child, unsigned int mode);
+ int (*ptrace_traceme) (struct task_struct *parent);
int (*capget) (struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable, kernel_cap_t *permitted);
extern void securityfs_remove(struct dentry *dentry);
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode);
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode);
+int security_ptrace_traceme(struct task_struct *parent);
int security_capget(struct task_struct *target,
kernel_cap_t *effective,
kernel_cap_t *inheritable,
return 0;
}
-static inline int security_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static inline int security_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
+{
+ return cap_ptrace_may_access(child, mode);
+}
+
+static inline int security_ptrace_traceme(struct task_struct *parent)
{
- return cap_ptrace(parent, child, mode);
+ return cap_ptrace_traceme(parent);
}
static inline int security_capget(struct task_struct *target,
extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
int hlen,
struct iovec *iov);
+extern int skb_copy_datagram_from_iovec(struct sk_buff *skb,
+ int offset,
+ struct iovec *from,
+ int len);
extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb);
extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
unsigned int flags);
#ifdef CONFIG_HIBERNATION
/* kernel/power/snapshot.c */
extern void __register_nosave_region(unsigned long b, unsigned long e, int km);
-static inline void register_nosave_region(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region(unsigned long b, unsigned long e)
{
__register_nosave_region(b, e, 0);
}
-static inline void register_nosave_region_late(unsigned long b, unsigned long e)
+static inline void __init register_nosave_region_late(unsigned long b, unsigned long e)
{
__register_nosave_region(b, e, 1);
}
extern int tick_init_highres(void);
extern int tick_program_event(ktime_t expires, int force);
extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
extern void tick_cancel_sched_timer(int cpu);
# else
static inline void tick_cancel_sched_timer(int cpu) { }
-# endif /* HIGHRES */
+# endif
# ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
extern struct tick_device *tick_get_broadcast_device(void);
extern void tty_driver_flush_buffer(struct tty_struct *tty);
extern void tty_throttle(struct tty_struct *tty);
extern void tty_unthrottle(struct tty_struct *tty);
+extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws);
extern int is_current_pgrp_orphaned(void);
extern struct pid *tty_get_pgrp(struct tty_struct *tty);
*
* Optional: If not provided then the write method is called under
* the atomic write lock to keep it serialized with the ldisc.
+ *
+ * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ * unsigned int rows, unsigned int cols);
+ *
+ * Called when a termios request is issued which changes the
+ * requested terminal geometry.
+ *
+ * Optional: the default action is to update the termios structure
+ * without error. This is usually the correct behaviour. Drivers should
+ * not force errors here if they are not resizable objects (eg a serial
+ * line). See tty_do_resize() if you need to wrap the standard method
+ * in your own logic - the usual case.
*/
#include <linux/fs.h>
int (*tiocmget)(struct tty_struct *tty, struct file *file);
int (*tiocmset)(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+ int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct winsize *ws);
#ifdef CONFIG_CONSOLE_POLL
int (*poll_init)(struct tty_driver *driver, int line, char *options);
int (*poll_get_char)(struct tty_driver *driver, int line);
* @sysfs_files_created: sysfs attributes exist
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ * has been deferred.
* @needs_binding: flag set when the driver should be re-probed or unbound
* following a reset or suspend operation it doesn't support.
* @dev: driver model's view of this device
unsigned is_active:1; /* the interface is not suspended */
unsigned sysfs_files_created:1; /* the sysfs attributes exist */
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
+ unsigned needs_altsetting0:1; /* switch to altsetting 0 is pending */
unsigned needs_binding:1; /* needs delayed unbind/rebind */
struct device dev; /* interface specific device info */
*/
#ifndef __LINUX_VIDEODEV2_H
#define __LINUX_VIDEODEV2_H
+
#ifdef __KERNEL__
#include <linux/time.h> /* need struct timeval */
-#include <linux/compiler.h> /* need __user */
#else
-#define __user
#include <sys/time.h>
#endif
+#include <linux/compiler.h>
#include <linux/ioctl.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/page.h> /* pgprot_t */
-struct vm_area_struct;
+struct vm_area_struct; /* vma defining user mapping in mm_types.h */
-/* bits in vm_struct->flags */
+/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
#define VM_MAP 0x00000004 /* vmap()ed pages */
int vc_allocate(unsigned int console);
int vc_cons_allocated(unsigned int console);
int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
-int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines);
void vc_deallocate(unsigned int console);
void reset_palette(struct vc_data *vc);
void do_blank_screen(int entering_gfx);
struct net_device *dev,
int strict);
-extern int ipv6_dev_get_saddr(struct net_device *dev,
+extern int ipv6_dev_get_saddr(struct net *net,
+ struct net_device *dev,
const struct in6_addr *daddr,
unsigned int srcprefs,
struct in6_addr *saddr);
{
struct sk_buff *skb;
struct netlink_callback *cb;
+ struct net *net;
};
extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
* rely on the host system for such buffering. This option is used
* to configure the IEEE 802.11 upper layer to buffer broadcast and
* multicast frames when there are power saving stations so that
- * the driver can fetch them with ieee80211_get_buffered_bc(). Note
- * that not setting this flag works properly only when the
- * %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because
- * otherwise the stack will not know when the DTIM beacon was sent.
+ * the driver can fetch them with ieee80211_get_buffered_bc().
*
* @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
* Hardware is not capable of short slot operation on the 2.4 GHz band.
* See the section "Frame filtering" for more information.
* This callback must be implemented and atomic.
*
- * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon
- * generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set)
- * mac80211 calls this function when a TIM bit must be set or cleared
- * for a given AID. Must be atomic.
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ * must be set or cleared for a given AID. Must be atomic.
*
* @set_key: See the section "Hardware crypto acceleration"
* This callback can sleep, and is only called between add_interface
extern int register_qdisc(struct Qdisc_ops *qops);
extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern void qdisc_list_del(struct Qdisc *q);
extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
{
__QDISC_STATE_RUNNING,
__QDISC_STATE_SCHED,
+ __QDISC_STATE_DEACTIVATED,
};
struct qdisc_size_table {
struct gnet_stats_basic bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
- struct rcu_head q_rcu;
int (*reshape_fail)(struct sk_buff *skb,
struct Qdisc *q);
return qdisc->dev_queue->qdisc;
}
+static inline struct Qdisc *qdisc_root_sleeping(struct Qdisc *qdisc)
+{
+ return qdisc->dev_queue->qdisc_sleeping;
+}
+
/* The qdisc root lock is a mechanism by which to top level
* of a qdisc tree can be locked from any qdisc node in the
* forest. This allows changing the configuration of some
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/blkdev.h>
+#include <scsi/scsi.h>
#include <asm/atomic.h>
struct request_queue;
static inline int scsi_device_protection(struct scsi_device *sdev)
{
- return sdev->inquiry[5] & (1<<0);
+ return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
}
#define MODULE_ALIAS_SCSI_DEVICE(type) \
If unsure say Y here.
-config SYSCTL_SYSCALL_CHECK
- bool "Sysctl checks" if EMBEDDED
- depends on SYSCTL_SYSCALL
- default y
- ---help---
- sys_sysctl uses binary paths that have been found challenging
- to properly maintain and use. This enables checks that help
- you to keep things correct.
-
- If unsure say Y here.
-
config KALLSYMS
bool "Load all symbols for debugging/ksymoops" if EMBEDDED
default y
return ret;
}
-int __capable(struct task_struct *t, int cap)
+/**
+ * capable - Determine if the current task has a superior capability in effect
+ * @cap: The capability to be tested for
+ *
+ * Return true if the current task has the given superior capability currently
+ * available for use, false if not.
+ *
+ * This sets PF_SUPERPRIV on the task if the capability is available on the
+ * assumption that it's about to be used.
+ */
+int capable(int cap)
{
- if (security_capable(t, cap) == 0) {
- t->flags |= PF_SUPERPRIV;
+ if (has_capability(current, cap)) {
+ current->flags |= PF_SUPERPRIV;
return 1;
}
return 0;
}
-
-int capable(int cap)
-{
- return __capable(current, cap);
-}
EXPORT_SYMBOL(capable);
#include <linux/slab.h>
#include <linux/fs.h>
#include <linux/kexec.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/highmem.h>
#include <linux/syscalls.h>
*
* The code for the transition from the current kernel to the
* the new kernel is placed in the control_code_buffer, whose size
- * is given by KEXEC_CONTROL_CODE_SIZE. In the best case only a single
+ * is given by KEXEC_CONTROL_PAGE_SIZE. In the best case only a single
* page of memory is necessary, but some architectures require more.
* Because this memory must be identity mapped in the transition from
* virtual to physical addresses it must live in the range
*/
result = -ENOMEM;
image->control_code_page = kimage_alloc_control_pages(image,
- get_order(KEXEC_CONTROL_CODE_SIZE));
+ get_order(KEXEC_CONTROL_PAGE_SIZE));
if (!image->control_code_page) {
printk(KERN_ERR "Could not allocate control_code_buffer\n");
goto out;
*/
result = -ENOMEM;
image->control_code_page = kimage_alloc_control_pages(image,
- get_order(KEXEC_CONTROL_CODE_SIZE));
+ get_order(KEXEC_CONTROL_PAGE_SIZE));
if (!image->control_code_page) {
printk(KERN_ERR "Could not allocate control_code_buffer\n");
goto out;
*/
struct kimage *kexec_image;
struct kimage *kexec_crash_image;
-/*
- * A home grown binary mutex.
- * Nothing can wait so this mutex is safe to use
- * in interrupt context :)
- */
-static int kexec_lock;
+
+static DEFINE_MUTEX(kexec_mutex);
asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
struct kexec_segment __user *segments,
unsigned long flags)
{
struct kimage **dest_image, *image;
- int locked;
int result;
/* We only trust the superuser with rebooting the system. */
*
* KISS: always take the mutex.
*/
- locked = xchg(&kexec_lock, 1);
- if (locked)
+ if (!mutex_trylock(&kexec_mutex))
return -EBUSY;
dest_image = &kexec_image;
image = xchg(dest_image, image);
out:
- locked = xchg(&kexec_lock, 0); /* Release the mutex */
- BUG_ON(!locked);
+ mutex_unlock(&kexec_mutex);
kimage_free(image);
return result;
void crash_kexec(struct pt_regs *regs)
{
- int locked;
-
-
- /* Take the kexec_lock here to prevent sys_kexec_load
+ /* Take the kexec_mutex here to prevent sys_kexec_load
* running on one cpu from replacing the crash kernel
* we are using after a panic on a different cpu.
*
* of memory the xchg(&kexec_crash_image) would be
* sufficient. But since I reuse the memory...
*/
- locked = xchg(&kexec_lock, 1);
- if (!locked) {
+ if (mutex_trylock(&kexec_mutex)) {
if (kexec_crash_image) {
struct pt_regs fixed_regs;
crash_setup_regs(&fixed_regs, regs);
machine_crash_shutdown(&fixed_regs);
machine_kexec(kexec_crash_image);
}
- locked = xchg(&kexec_lock, 0);
- BUG_ON(!locked);
+ mutex_unlock(&kexec_mutex);
}
}
module_init(crash_save_vmcoreinfo_init)
-/**
- * kernel_kexec - reboot the system
- *
- * Move into place and start executing a preloaded standalone
- * executable. If nothing was preloaded return an error.
+/*
+ * Move into place and start executing a preloaded standalone
+ * executable. If nothing was preloaded return an error.
*/
int kernel_kexec(void)
{
int error = 0;
- if (xchg(&kexec_lock, 1))
+ if (!mutex_trylock(&kexec_mutex))
return -EBUSY;
if (!kexec_image) {
error = -EINVAL;
goto Unlock;
}
- if (kexec_image->preserve_context) {
#ifdef CONFIG_KEXEC_JUMP
+ if (kexec_image->preserve_context) {
mutex_lock(&pm_mutex);
pm_prepare_console();
error = freeze_processes();
error = disable_nonboot_cpus();
if (error)
goto Resume_devices;
+ device_pm_lock();
local_irq_disable();
/* At this point, device_suspend() has been called,
* but *not* device_power_down(). We *must*
error = device_power_down(PMSG_FREEZE);
if (error)
goto Enable_irqs;
- save_processor_state();
+ } else
#endif
- } else {
- blocking_notifier_call_chain(&reboot_notifier_list,
- SYS_RESTART, NULL);
- system_state = SYSTEM_RESTART;
- device_shutdown();
- sysdev_shutdown();
+ {
+ kernel_restart_prepare(NULL);
printk(KERN_EMERG "Starting new kernel\n");
machine_shutdown();
}
machine_kexec(kexec_image);
- if (kexec_image->preserve_context) {
#ifdef CONFIG_KEXEC_JUMP
- restore_processor_state();
+ if (kexec_image->preserve_context) {
device_power_up(PMSG_RESTORE);
Enable_irqs:
local_irq_enable();
+ device_pm_unlock();
enable_nonboot_cpus();
Resume_devices:
device_resume(PMSG_RESTORE);
Restore_console:
pm_restore_console();
mutex_unlock(&pm_mutex);
-#endif
}
+#endif
Unlock:
- xchg(&kexec_lock, 0);
-
+ mutex_unlock(&kexec_mutex);
return error;
}
hlock = curr->held_locks + i;
if (chain_key != hlock->prev_chain_key) {
debug_locks_off();
- printk("hm#1, depth: %u [%u], %016Lx != %016Lx\n",
+ WARN(1, "hm#1, depth: %u [%u], %016Lx != %016Lx\n",
curr->lockdep_depth, i,
(unsigned long long)chain_key,
(unsigned long long)hlock->prev_chain_key);
- WARN_ON(1);
return;
}
id = hlock->class_idx - 1;
}
if (chain_key != curr->curr_chain_key) {
debug_locks_off();
- printk("hm#2, depth: %u [%u], %016Lx != %016Lx\n",
+ WARN(1, "hm#2, depth: %u [%u], %016Lx != %016Lx\n",
curr->lockdep_depth, i,
(unsigned long long)chain_key,
(unsigned long long)curr->curr_chain_key);
- WARN_ON(1);
}
#endif
}
hlock->trylock = trylock;
hlock->read = read;
hlock->check = check;
- hlock->hardirqs_off = hardirqs_off;
+ hlock->hardirqs_off = !!hardirqs_off;
#ifdef CONFIG_LOCK_STAT
hlock->waittime_stamp = 0;
hlock->holdtime_stamp = sched_clock();
extern unsigned int max_lockdep_depth;
extern unsigned int max_recursion_depth;
+#ifdef CONFIG_PROVE_LOCKING
extern unsigned long lockdep_count_forward_deps(struct lock_class *);
extern unsigned long lockdep_count_backward_deps(struct lock_class *);
+#else
+static inline unsigned long
+lockdep_count_forward_deps(struct lock_class *class)
+{
+ return 0;
+}
+static inline unsigned long
+lockdep_count_backward_deps(struct lock_class *class)
+{
+ return 0;
+}
+#endif
#ifdef CONFIG_DEBUG_LOCKDEP
/*
static int l_show(struct seq_file *m, void *v)
{
- unsigned long nr_forward_deps, nr_backward_deps;
struct lock_class *class = v;
struct lock_list *entry;
char c1, c2, c3, c4;
#ifdef CONFIG_DEBUG_LOCKDEP
seq_printf(m, " OPS:%8ld", class->ops);
#endif
- nr_forward_deps = lockdep_count_forward_deps(class);
- seq_printf(m, " FD:%5ld", nr_forward_deps);
-
- nr_backward_deps = lockdep_count_backward_deps(class);
- seq_printf(m, " BD:%5ld", nr_backward_deps);
+#ifdef CONFIG_PROVE_LOCKING
+ seq_printf(m, " FD:%5ld", lockdep_count_forward_deps(class));
+ seq_printf(m, " BD:%5ld", lockdep_count_backward_deps(class));
+#endif
get_usage_chars(class, &c1, &c2, &c3, &c4);
seq_printf(m, " %c%c%c%c", c1, c2, c3, c4);
if (class->usage_mask & LOCKF_ENABLED_HARDIRQS_READ)
nr_hardirq_read_unsafe++;
+#ifdef CONFIG_PROVE_LOCKING
sum_forward_deps += lockdep_count_forward_deps(class);
+#endif
}
#ifdef CONFIG_DEBUG_LOCKDEP
DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused);
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/nsproxy.h>
#include <linux/init_task.h>
#include <linux/mnt_namespace.h>
#include <linux/module.h>
#include <linux/file.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/genhd.h>
if (!dumpable && !capable(CAP_SYS_PTRACE))
return -EPERM;
- return security_ptrace(current, task, mode);
+ return security_ptrace_may_access(task, mode);
}
bool ptrace_may_access(struct task_struct *task, unsigned int mode)
goto repeat;
}
- ret = security_ptrace(current->parent, current,
- PTRACE_MODE_ATTACH);
+ ret = security_ptrace_traceme(current->parent);
/*
* Set the ptrace bit in the process ptrace flags.
* sections are delimited by rcu_read_lock() and rcu_read_unlock(),
* and may be nested.
*/
+void synchronize_rcu(void); /* Makes kernel-doc tools happy */
synchronize_rcu_xxx(synchronize_rcu, call_rcu)
EXPORT_SYMBOL_GPL(synchronize_rcu);
/*
* ratelimit for updating the group shares.
- * default: 0.5ms
+ * default: 0.25ms
*/
-const_debug unsigned int sysctl_sched_shares_ratelimit = 500000;
+unsigned int sysctl_sched_shares_ratelimit = 250000;
/*
* period over which we measure -rt task cpu usage in us.
}
EXPORT_SYMBOL(wait_for_completion_killable);
+/**
+ * try_wait_for_completion - try to decrement a completion without blocking
+ * @x: completion structure
+ *
+ * Returns: 0 if a decrement cannot be done without blocking
+ * 1 if a decrement succeeded.
+ *
+ * If a completion is being used as a counting completion,
+ * attempt to decrement the counter without blocking. This
+ * enables us to avoid waiting if the resource the completion
+ * is protecting is not available.
+ */
+bool try_wait_for_completion(struct completion *x)
+{
+ int ret = 1;
+
+ spin_lock_irq(&x->wait.lock);
+ if (!x->done)
+ ret = 0;
+ else
+ x->done--;
+ spin_unlock_irq(&x->wait.lock);
+ return ret;
+}
+EXPORT_SYMBOL(try_wait_for_completion);
+
+/**
+ * completion_done - Test to see if a completion has any waiters
+ * @x: completion structure
+ *
+ * Returns: 0 if there are waiters (wait_for_completion() in progress)
+ * 1 if there are no waiters.
+ *
+ */
+bool completion_done(struct completion *x)
+{
+ int ret = 1;
+
+ spin_lock_irq(&x->wait.lock);
+ if (!x->done)
+ ret = 0;
+ spin_unlock_irq(&x->wait.lock);
+ return ret;
+}
+EXPORT_SYMBOL(completion_done);
+
static long __sched
sleep_on_common(wait_queue_head_t *q, int state, long timeout)
{
sysctl_sched_latency = limit;
sysctl_sched_wakeup_granularity *= factor;
+
+ sysctl_sched_shares_ratelimit *= factor;
}
#ifdef CONFIG_SMP
WARN_ON(!parent); /* root should already exist */
tg->parent = parent;
- list_add_rcu(&tg->siblings, &parent->children);
INIT_LIST_HEAD(&tg->children);
+ list_add_rcu(&tg->siblings, &parent->children);
spin_unlock_irqrestore(&task_group_lock, flags);
return tg;
SCHED_FEAT(HRTICK, 1)
SCHED_FEAT(DOUBLE_TICK, 0)
SCHED_FEAT(ASYM_GRAN, 1)
-SCHED_FEAT(LB_BIAS, 0)
+SCHED_FEAT(LB_BIAS, 1)
SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
SCHED_FEAT(ASYM_EFF_LOAD, 1)
struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i);
s64 diff;
- if (iter == rt_rq)
+ if (iter == rt_rq || iter->rt_runtime == RUNTIME_INF)
continue;
spin_lock(&iter->rt_runtime_lock);
struct siginfo info;
unsigned long flags;
struct sighand_struct *psig;
+ int ret = sig;
BUG_ON(sig == -1);
* is implementation-defined: we do (if you don't want
* it, just use SIG_IGN instead).
*/
- tsk->exit_signal = -1;
+ ret = tsk->exit_signal = -1;
if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
sig = -1;
}
__wake_up_parent(tsk, tsk->parent);
spin_unlock_irqrestore(&psig->siglock, flags);
- return sig;
+ return ret;
}
static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
{
struct call_single_data d;
unsigned long flags;
- /* prevent preemption and reschedule on another processor */
+ /* prevent preemption and reschedule on another processor,
+ as well as CPU removal */
int me = get_cpu();
+ int err = 0;
/* Can deadlock when called with interrupts disabled */
WARN_ON(irqs_disabled());
local_irq_save(flags);
func(info);
local_irq_restore(flags);
- } else {
+ } else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) {
struct call_single_data *data = NULL;
if (!wait) {
data->func = func;
data->info = info;
generic_exec_single(cpu, data);
+ } else {
+ err = -ENXIO; /* CPU not online */
}
put_cpu();
- return 0;
+ return err;
}
EXPORT_SYMBOL(smp_call_function_single);
spin_acquire(&lock->dep_map, subclass, 0, _RET_IP_);
LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
}
-
EXPORT_SYMBOL(_spin_lock_nested);
unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass)
#endif
return flags;
}
-
EXPORT_SYMBOL(_spin_lock_irqsave_nested);
void __lockfunc _spin_lock_nest_lock(spinlock_t *lock,
spin_acquire_nest(&lock->dep_map, 0, 0, nest_lock, _RET_IP_);
LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock);
}
-
EXPORT_SYMBOL(_spin_lock_nest_lock);
#endif
pgrp = find_vpid(who);
else
pgrp = task_pgrp(current);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
error = set_one_prio(p, niceval, error);
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
pgrp = find_vpid(who);
else
pgrp = task_pgrp(current);
- do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+ do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
niceval = 20 - task_nice(p);
if (niceval > retval)
retval = niceval;
- } while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+ } while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
break;
case PRIO_USER:
user = current->user;
}
EXPORT_SYMBOL_GPL(emergency_restart);
-static void kernel_restart_prepare(char *cmd)
+void kernel_restart_prepare(char *cmd)
{
blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd);
system_state = SYSTEM_RESTART;
ts->nohz_mode = NOHZ_MODE_HIGHRES;
#endif
}
+#endif /* HIGH_RES_TIMERS */
+#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
void tick_cancel_sched_timer(int cpu)
{
struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
+# ifdef CONFIG_HIGH_RES_TIMERS
if (ts->sched_timer.base)
hrtimer_cancel(&ts->sched_timer);
+# endif
ts->nohz_mode = NOHZ_MODE_INACTIVE;
}
-#endif /* HIGH_RES_TIMERS */
+#endif
/**
* Async notification about clocksource changes
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/nsproxy.h>
#include <linux/slab.h>
#include <linux/user_namespace.h>
#include <linux/module.h>
#include <linux/uts.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/uts.h>
#include <linux/utsname.h>
-#include <linux/version.h>
#include <linux/sysctl.h>
static void *get_uts(ctl_table *table, int write)
Enable this option if you want to use the LatencyTOP tool
to find out which userspace is blocking on what kernel operations.
+config SYSCTL_SYSCALL_CHECK
+ bool "Sysctl checks"
+ depends on SYSCTL_SYSCALL
+ ---help---
+ sys_sysctl uses binary paths that have been found challenging
+ to properly maintain and use. This enables checks that help
+ you to keep things correct.
+
source kernel/trace/Kconfig
config PROVIDE_OHCI1394_DMA_INIT
return -ENOMEM;
/* ewww... some of these buggers have '/' in the name ... */
- s = strchr(kobj->name, '/');
- if (s)
+ while ((s = strchr(kobj->name, '/')))
s[0] = '!';
kfree(old_name);
if (lmb.memory.region[0].size < lmb.rmo_size)
lmb.rmo_size = lmb.memory.region[0].size;
+ memory_limit = lmb_end_of_DRAM();
+
/* And truncate any reserves above the limit also. */
for (i = 0; i < lmb.reserved.cnt; i++) {
p = &lmb.reserved.region[i];
}
#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
+static unsigned long align_idx(struct bootmem_data *bdata, unsigned long idx,
+ unsigned long step)
+{
+ unsigned long base = bdata->node_min_pfn;
+
+ /*
+ * Align the index with respect to the node start so that the
+ * combination of both satisfies the requested alignment.
+ */
+
+ return ALIGN(base + idx, step) - base;
+}
+
+static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,
+ unsigned long align)
+{
+ unsigned long base = PFN_PHYS(bdata->node_min_pfn);
+
+ /* Same as align_idx for byte offsets */
+
+ return ALIGN(base + off, align) - base;
+}
+
static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
else
start = ALIGN(min, step);
- sidx = start - bdata->node_min_pfn;;
+ sidx = start - bdata->node_min_pfn;
midx = max - bdata->node_min_pfn;
if (bdata->hint_idx > sidx) {
* catch the fallback below.
*/
fallback = sidx + 1;
- sidx = ALIGN(bdata->hint_idx, step);
+ sidx = align_idx(bdata, bdata->hint_idx, step);
}
while (1) {
unsigned long eidx, i, start_off, end_off;
find_block:
sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
- sidx = ALIGN(sidx, step);
+ sidx = align_idx(bdata, sidx, step);
eidx = sidx + PFN_UP(size);
if (sidx >= midx || eidx > midx)
for (i = sidx; i < eidx; i++)
if (test_bit(i, bdata->node_bootmem_map)) {
- sidx = ALIGN(i, step);
+ sidx = align_idx(bdata, i, step);
if (sidx == i)
sidx += step;
goto find_block;
}
- if (bdata->last_end_off &&
+ if (bdata->last_end_off & (PAGE_SIZE - 1) &&
PFN_DOWN(bdata->last_end_off) + 1 == sidx)
- start_off = ALIGN(bdata->last_end_off, align);
+ start_off = align_off(bdata, bdata->last_end_off, align);
else
start_off = PFN_PHYS(sidx);
}
if (fallback) {
- sidx = ALIGN(fallback - 1, step);
+ sidx = align_idx(bdata, fallback - 1, step);
fallback = 0;
goto find_block;
}
#include <linux/rmap.h>
#include <linux/mmu_notifier.h>
#include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
#include <asm/tlbflush.h>
#include <asm/io.h>
* We do use our own empty page to avoid interference with other users
* of ZERO_PAGE(), such as /dev/zero
*/
+static DEFINE_MUTEX(xip_sparse_mutex);
+static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
static struct page *__xip_sparse_page;
+/* called under xip_sparse_mutex */
static struct page *xip_sparse_page(void)
{
if (!__xip_sparse_page) {
struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
- if (page) {
- static DEFINE_SPINLOCK(xip_alloc_lock);
- spin_lock(&xip_alloc_lock);
- if (!__xip_sparse_page)
- __xip_sparse_page = page;
- else
- __free_page(page);
- spin_unlock(&xip_alloc_lock);
- }
+ if (page)
+ __xip_sparse_page = page;
}
return __xip_sparse_page;
}
pte_t pteval;
spinlock_t *ptl;
struct page *page;
+ unsigned count;
+ int locked = 0;
+
+ count = read_seqcount_begin(&xip_sparse_seq);
page = __xip_sparse_page;
if (!page)
return;
+retry:
spin_lock(&mapping->i_mmap_lock);
vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
mm = vma->vm_mm;
address = vma->vm_start +
((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
BUG_ON(address < vma->vm_start || address >= vma->vm_end);
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 1);
if (pte) {
/* Nuke the page table entry. */
flush_cache_page(vma, address, pte_pfn(*pte));
}
}
spin_unlock(&mapping->i_mmap_lock);
+
+ if (locked) {
+ mutex_unlock(&xip_sparse_mutex);
+ } else if (read_seqcount_retry(&xip_sparse_seq, count)) {
+ mutex_lock(&xip_sparse_mutex);
+ locked = 1;
+ goto retry;
+ }
}
/*
int error;
/* XXX: are VM_FAULT_ codes OK? */
-
+again:
size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
if (vmf->pgoff >= size)
return VM_FAULT_SIGBUS;
int err;
/* maybe shared writable, allocate new block */
+ mutex_lock(&xip_sparse_mutex);
error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
&xip_mem, &xip_pfn);
+ mutex_unlock(&xip_sparse_mutex);
if (error)
return VM_FAULT_SIGBUS;
/* unmap sparse mappings at pgoff from all other vmas */
BUG_ON(err);
return VM_FAULT_NOPAGE;
} else {
+ int err, ret = VM_FAULT_OOM;
+
+ mutex_lock(&xip_sparse_mutex);
+ write_seqcount_begin(&xip_sparse_seq);
+ error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
+ &xip_mem, &xip_pfn);
+ if (unlikely(!error)) {
+ write_seqcount_end(&xip_sparse_seq);
+ mutex_unlock(&xip_sparse_mutex);
+ goto again;
+ }
+ if (error != -ENODATA)
+ goto out;
/* not shared and writable, use xip_sparse_page() */
page = xip_sparse_page();
if (!page)
- return VM_FAULT_OOM;
+ goto out;
+ err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
+ page);
+ if (err == -ENOMEM)
+ goto out;
- page_cache_get(page);
- vmf->page = page;
- return 0;
+ ret = VM_FAULT_NOPAGE;
+out:
+ write_seqcount_end(&xip_sparse_seq);
+ mutex_unlock(&xip_sparse_mutex);
+
+ return ret;
}
}
&xip_mem, &xip_pfn);
if (status == -ENODATA) {
/* we allocate a new page unmap it */
+ mutex_lock(&xip_sparse_mutex);
status = a_ops->get_xip_mem(mapping, index, 1,
&xip_mem, &xip_pfn);
+ mutex_unlock(&xip_sparse_mutex);
if (!status)
/* unmap page at pgoff from all other vmas */
__xip_unmap(mapping, index);
#include "internal.h"
#ifdef CONFIG_DEBUG_MEMORY_INIT
-int __meminitdata mminit_loglevel;
+int mminit_loglevel;
#ifndef SECTIONS_SHIFT
#define SECTIONS_SHIFT 0
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/memcontrol.h>
+#include <linux/security.h>
int sysctl_panic_on_oom;
int sysctl_oom_kill_allocating_task;
* Superuser processes are usually more important, so we make it
* less likely that we kill those.
*/
- if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE))
+ if (has_capability(p, CAP_SYS_ADMIN) ||
+ has_capability(p, CAP_SYS_RESOURCE))
points /= 4;
/*
* tend to only have this flag set on applications they think
* of as important.
*/
- if (__capable(p, CAP_SYS_RAWIO))
+ if (has_capability(p, CAP_SYS_RAWIO))
points /= 4;
/*
/*
* Check that @page is mapped at @address into @mm.
*
+ * If @sync is false, page_check_address may perform a racy check to avoid
+ * the page table lock when the pte is not present (helpful when reclaiming
+ * highly shared pages).
+ *
* On success returns with pte mapped and locked.
*/
pte_t *page_check_address(struct page *page, struct mm_struct *mm,
- unsigned long address, spinlock_t **ptlp)
+ unsigned long address, spinlock_t **ptlp, int sync)
{
pgd_t *pgd;
pud_t *pud;
pte = pte_offset_map(pmd, address);
/* Make a quick check before getting the lock */
- if (!pte_present(*pte)) {
+ if (!sync && !pte_present(*pte)) {
pte_unmap(pte);
return NULL;
}
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 0);
if (!pte)
goto out;
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 1);
if (!pte)
goto out;
}
/*
- * It would be tidy to reset the PageAnon mapping here,
- * but that might overwrite a racing page_add_anon_rmap
- * which increments mapcount after us but sets mapping
- * before us: so leave the reset to free_hot_cold_page,
- * and remember that it's only reliable while mapped.
- * Leaving it set also helps swapoff to reinstate ptes
- * faster for those pages still in swapcache.
+ * Now that the last pte has gone, s390 must transfer dirty
+ * flag from storage key to struct page. We can usually skip
+ * this if the page is anon, so about to be freed; but perhaps
+ * not if it's in swapcache - there might be another pte slot
+ * containing the swap entry, but page not yet written to swap.
*/
if ((!PageAnon(page) || PageSwapCache(page)) &&
page_test_dirty(page)) {
page_clear_dirty(page);
set_page_dirty(page);
}
- mem_cgroup_uncharge_page(page);
+ mem_cgroup_uncharge_page(page);
__dec_zone_page_state(page,
- PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+ PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+ /*
+ * It would be tidy to reset the PageAnon mapping here,
+ * but that might overwrite a racing page_add_anon_rmap
+ * which increments mapcount after us but sets mapping
+ * before us: so leave the reset to free_hot_cold_page,
+ * and remember that it's only reliable while mapped.
+ * Leaving it set also helps swapoff to reinstate ptes
+ * faster for those pages still in swapcache.
+ */
}
}
if (address == -EFAULT)
goto out;
- pte = page_check_address(page, mm, address, &ptl);
+ pte = page_check_address(page, mm, address, &ptl, 0);
if (!pte)
goto out;
printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
swap_cache_info.add_total, swap_cache_info.del_total,
swap_cache_info.find_success, swap_cache_info.find_total);
- printk("Free swap = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
+ printk("Free swap = %ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10));
}
subsys_initcall(bt_init);
module_exit(bt_exit);
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth Core ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(compress_dst, bool, 0644);
MODULE_PARM_DESC(compress_dst, "Compress destination headers");
-MODULE_AUTHOR("David Libault <david.libault@inventel.fr>, Maxim Krasnyansky <maxk@qualcomm.com>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth BNEP ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
#include <linux/kernel.h>
#include <linux/init.h>
-#include <linux/platform_device.h>
-
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#undef BT_DBG
#define BT_DBG(D...)
#endif
+
+struct class *bt_class = NULL;
+EXPORT_SYMBOL_GPL(bt_class);
+
static struct workqueue_struct *btaddconn;
static struct workqueue_struct *btdelconn;
-static inline char *typetostr(int type)
+static inline char *link_typetostr(int type)
+{
+ switch (type) {
+ case ACL_LINK:
+ return "ACL";
+ case SCO_LINK:
+ return "SCO";
+ case ESCO_LINK:
+ return "eSCO";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static ssize_t show_link_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+ return sprintf(buf, "%s\n", link_typetostr(conn->type));
+}
+
+static ssize_t show_link_address(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+ bdaddr_t bdaddr;
+ baswap(&bdaddr, &conn->dst);
+ return sprintf(buf, "%s\n", batostr(&bdaddr));
+}
+
+static ssize_t show_link_features(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct hci_conn *conn = dev_get_drvdata(dev);
+
+ return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ conn->features[0], conn->features[1],
+ conn->features[2], conn->features[3],
+ conn->features[4], conn->features[5],
+ conn->features[6], conn->features[7]);
+}
+
+#define LINK_ATTR(_name,_mode,_show,_store) \
+struct device_attribute link_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+static LINK_ATTR(type, S_IRUGO, show_link_type, NULL);
+static LINK_ATTR(address, S_IRUGO, show_link_address, NULL);
+static LINK_ATTR(features, S_IRUGO, show_link_features, NULL);
+
+static struct attribute *bt_link_attrs[] = {
+ &link_attr_type.attr,
+ &link_attr_address.attr,
+ &link_attr_features.attr,
+ NULL
+};
+
+static struct attribute_group bt_link_group = {
+ .attrs = bt_link_attrs,
+};
+
+static struct attribute_group *bt_link_groups[] = {
+ &bt_link_group,
+ NULL
+};
+
+static void bt_link_release(struct device *dev)
+{
+ void *data = dev_get_drvdata(dev);
+ kfree(data);
+}
+
+static struct device_type bt_link = {
+ .name = "link",
+ .groups = bt_link_groups,
+ .release = bt_link_release,
+};
+
+static void add_conn(struct work_struct *work)
+{
+ struct hci_conn *conn = container_of(work, struct hci_conn, work);
+
+ flush_workqueue(btdelconn);
+
+ if (device_add(&conn->dev) < 0) {
+ BT_ERR("Failed to register connection device");
+ return;
+ }
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+ struct hci_dev *hdev = conn->hdev;
+
+ BT_DBG("conn %p", conn);
+
+ conn->dev.type = &bt_link;
+ conn->dev.class = bt_class;
+ conn->dev.parent = &hdev->dev;
+
+ snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
+ hdev->name, conn->handle);
+
+ dev_set_drvdata(&conn->dev, conn);
+
+ device_initialize(&conn->dev);
+
+ INIT_WORK(&conn->work, add_conn);
+
+ queue_work(btaddconn, &conn->work);
+}
+
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
+static int __match_tty(struct device *dev, void *data)
+{
+ return !strncmp(dev->bus_id, "rfcomm", 6);
+}
+
+static void del_conn(struct work_struct *work)
+{
+ struct hci_conn *conn = container_of(work, struct hci_conn, work);
+ struct hci_dev *hdev = conn->hdev;
+
+ while (1) {
+ struct device *dev;
+
+ dev = device_find_child(&conn->dev, NULL, __match_tty);
+ if (!dev)
+ break;
+ device_move(dev, NULL);
+ put_device(dev);
+ }
+
+ device_del(&conn->dev);
+ put_device(&conn->dev);
+ hci_dev_put(hdev);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ if (!device_is_registered(&conn->dev))
+ return;
+
+ INIT_WORK(&conn->work, del_conn);
+
+ queue_work(btdelconn, &conn->work);
+}
+
+static inline char *host_typetostr(int type)
{
switch (type) {
case HCI_VIRTUAL:
static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct hci_dev *hdev = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", typetostr(hdev->type));
+ return sprintf(buf, "%s\n", host_typetostr(hdev->type));
}
static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
static DEVICE_ATTR(sniff_min_interval, S_IRUGO | S_IWUSR,
show_sniff_min_interval, store_sniff_min_interval);
-static struct device_attribute *bt_attrs[] = {
- &dev_attr_type,
- &dev_attr_name,
- &dev_attr_class,
- &dev_attr_address,
- &dev_attr_features,
- &dev_attr_manufacturer,
- &dev_attr_hci_version,
- &dev_attr_hci_revision,
- &dev_attr_inquiry_cache,
- &dev_attr_idle_timeout,
- &dev_attr_sniff_max_interval,
- &dev_attr_sniff_min_interval,
+static struct attribute *bt_host_attrs[] = {
+ &dev_attr_type.attr,
+ &dev_attr_name.attr,
+ &dev_attr_class.attr,
+ &dev_attr_address.attr,
+ &dev_attr_features.attr,
+ &dev_attr_manufacturer.attr,
+ &dev_attr_hci_version.attr,
+ &dev_attr_hci_revision.attr,
+ &dev_attr_inquiry_cache.attr,
+ &dev_attr_idle_timeout.attr,
+ &dev_attr_sniff_max_interval.attr,
+ &dev_attr_sniff_min_interval.attr,
NULL
};
-static ssize_t show_conn_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
- return sprintf(buf, "%s\n", conn->type == ACL_LINK ? "ACL" : "SCO");
-}
-
-static ssize_t show_conn_address(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
- bdaddr_t bdaddr;
- baswap(&bdaddr, &conn->dst);
- return sprintf(buf, "%s\n", batostr(&bdaddr));
-}
-
-static ssize_t show_conn_features(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct hci_conn *conn = dev_get_drvdata(dev);
-
- return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
- conn->features[0], conn->features[1],
- conn->features[2], conn->features[3],
- conn->features[4], conn->features[5],
- conn->features[6], conn->features[7]);
-}
-
-#define CONN_ATTR(_name,_mode,_show,_store) \
-struct device_attribute conn_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-static CONN_ATTR(type, S_IRUGO, show_conn_type, NULL);
-static CONN_ATTR(address, S_IRUGO, show_conn_address, NULL);
-static CONN_ATTR(features, S_IRUGO, show_conn_features, NULL);
-
-static struct device_attribute *conn_attrs[] = {
- &conn_attr_type,
- &conn_attr_address,
- &conn_attr_features,
- NULL
+static struct attribute_group bt_host_group = {
+ .attrs = bt_host_attrs,
};
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
-
-static struct bus_type bt_bus = {
- .name = "bluetooth",
+static struct attribute_group *bt_host_groups[] = {
+ &bt_host_group,
+ NULL
};
-static struct platform_device *bt_platform;
-
-static void bt_release(struct device *dev)
+static void bt_host_release(struct device *dev)
{
void *data = dev_get_drvdata(dev);
kfree(data);
}
-static void add_conn(struct work_struct *work)
-{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
- int i;
-
- flush_workqueue(btdelconn);
-
- if (device_add(&conn->dev) < 0) {
- BT_ERR("Failed to register connection device");
- return;
- }
-
- for (i = 0; conn_attrs[i]; i++)
- if (device_create_file(&conn->dev, conn_attrs[i]) < 0)
- BT_ERR("Failed to create connection attribute");
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- BT_DBG("conn %p", conn);
-
- conn->dev.bus = &bt_bus;
- conn->dev.parent = &hdev->dev;
-
- conn->dev.release = bt_release;
-
- snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
- hdev->name, conn->handle);
-
- dev_set_drvdata(&conn->dev, conn);
-
- device_initialize(&conn->dev);
-
- INIT_WORK(&conn->work, add_conn);
-
- queue_work(btaddconn, &conn->work);
-}
-
-/*
- * The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- */
-static int __match_tty(struct device *dev, void *data)
-{
- return !strncmp(dev->bus_id, "rfcomm", 6);
-}
-
-static void del_conn(struct work_struct *work)
-{
- struct hci_conn *conn = container_of(work, struct hci_conn, work);
- struct hci_dev *hdev = conn->hdev;
-
- while (1) {
- struct device *dev;
-
- dev = device_find_child(&conn->dev, NULL, __match_tty);
- if (!dev)
- break;
- device_move(dev, NULL);
- put_device(dev);
- }
-
- device_del(&conn->dev);
- put_device(&conn->dev);
- hci_dev_put(hdev);
-}
-
-void hci_conn_del_sysfs(struct hci_conn *conn)
-{
- BT_DBG("conn %p", conn);
-
- if (!device_is_registered(&conn->dev))
- return;
-
- INIT_WORK(&conn->work, del_conn);
-
- queue_work(btdelconn, &conn->work);
-}
+static struct device_type bt_host = {
+ .name = "host",
+ .groups = bt_host_groups,
+ .release = bt_host_release,
+};
int hci_register_sysfs(struct hci_dev *hdev)
{
struct device *dev = &hdev->dev;
- unsigned int i;
int err;
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
- dev->bus = &bt_bus;
+ dev->type = &bt_host;
+ dev->class = bt_class;
dev->parent = hdev->parent;
strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
- dev->release = bt_release;
-
dev_set_drvdata(dev, hdev);
err = device_register(dev);
if (err < 0)
return err;
- for (i = 0; bt_attrs[i]; i++)
- if (device_create_file(dev, bt_attrs[i]) < 0)
- BT_ERR("Failed to create device attribute");
-
return 0;
}
int __init bt_sysfs_init(void)
{
- int err;
-
btaddconn = create_singlethread_workqueue("btaddconn");
- if (!btaddconn) {
- err = -ENOMEM;
- goto out;
- }
+ if (!btaddconn)
+ return -ENOMEM;
btdelconn = create_singlethread_workqueue("btdelconn");
if (!btdelconn) {
- err = -ENOMEM;
- goto out_del;
- }
-
- bt_platform = platform_device_register_simple("bluetooth", -1, NULL, 0);
- if (IS_ERR(bt_platform)) {
- err = PTR_ERR(bt_platform);
- goto out_platform;
+ destroy_workqueue(btaddconn);
+ return -ENOMEM;
}
- err = bus_register(&bt_bus);
- if (err < 0)
- goto out_bus;
-
bt_class = class_create(THIS_MODULE, "bluetooth");
if (IS_ERR(bt_class)) {
- err = PTR_ERR(bt_class);
- goto out_class;
+ destroy_workqueue(btdelconn);
+ destroy_workqueue(btaddconn);
+ return PTR_ERR(bt_class);
}
return 0;
-
-out_class:
- bus_unregister(&bt_bus);
-out_bus:
- platform_device_unregister(bt_platform);
-out_platform:
- destroy_workqueue(btdelconn);
-out_del:
- destroy_workqueue(btaddconn);
-out:
- return err;
}
void bt_sysfs_cleanup(void)
{
destroy_workqueue(btaddconn);
-
destroy_workqueue(btdelconn);
class_destroy(bt_class);
-
- bus_unregister(&bt_bus);
-
- platform_device_unregister(bt_platform);
}
module_init(l2cap_init);
module_exit(l2cap_exit);
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(l2cap_mtu, uint, 0644);
MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
module_param(disable_esco, bool, 0644);
MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
MODULE_DESCRIPTION("Bluetooth SCO ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
}
static struct ethtool_ops br_ethtool_ops = {
- .get_drvinfo = br_getinfo,
- .get_link = ethtool_op_get_link,
- .set_sg = br_set_sg,
- .set_tx_csum = br_set_tx_csum,
- .set_tso = br_set_tso,
+ .get_drvinfo = br_getinfo,
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = br_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = br_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = br_set_tso,
+ .get_ufo = ethtool_op_get_ufo,
+ .get_flags = ethtool_op_get_flags,
};
void br_dev_setup(struct net_device *dev)
return -EFAULT;
}
+/**
+ * skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
+ * @skb: buffer to copy
+ * @offset: offset in the buffer to start copying to
+ * @from: io vector to copy to
+ * @len: amount of data to copy to buffer from iovec
+ *
+ * Returns 0 or -EFAULT.
+ * Note: the iovec is modified during the copy.
+ */
+int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
+ struct iovec *from, int len)
+{
+ int start = skb_headlen(skb);
+ int i, copy = start - offset;
+
+ /* Copy header. */
+ if (copy > 0) {
+ if (copy > len)
+ copy = len;
+ if (memcpy_fromiovec(skb->data + offset, from, copy))
+ goto fault;
+ if ((len -= copy) == 0)
+ return 0;
+ offset += copy;
+ }
+
+ /* Copy paged appendix. Hmm... why does this look so complicated? */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ int end;
+
+ WARN_ON(start > offset + len);
+
+ end = start + skb_shinfo(skb)->frags[i].size;
+ if ((copy = end - offset) > 0) {
+ int err;
+ u8 *vaddr;
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ struct page *page = frag->page;
+
+ if (copy > len)
+ copy = len;
+ vaddr = kmap(page);
+ err = memcpy_fromiovec(vaddr + frag->page_offset +
+ offset - start, from, copy);
+ kunmap(page);
+ if (err)
+ goto fault;
+
+ if (!(len -= copy))
+ return 0;
+ offset += copy;
+ }
+ start = end;
+ }
+
+ if (skb_shinfo(skb)->frag_list) {
+ struct sk_buff *list = skb_shinfo(skb)->frag_list;
+
+ for (; list; list = list->next) {
+ int end;
+
+ WARN_ON(start > offset + len);
+
+ end = start + list->len;
+ if ((copy = end - offset) > 0) {
+ if (copy > len)
+ copy = len;
+ if (skb_copy_datagram_from_iovec(list,
+ offset - start,
+ from, copy))
+ goto fault;
+ if ((len -= copy) == 0)
+ return 0;
+ offset += copy;
+ }
+ start = end;
+ }
+ }
+ if (!len)
+ return 0;
+
+fault:
+ return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_from_iovec);
+
static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
u8 __user *to, int len,
__wsum *csump)
}
-void __netif_schedule(struct Qdisc *q)
+static inline void __netif_reschedule(struct Qdisc *q)
{
- if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) {
- struct softnet_data *sd;
- unsigned long flags;
+ struct softnet_data *sd;
+ unsigned long flags;
- local_irq_save(flags);
- sd = &__get_cpu_var(softnet_data);
- q->next_sched = sd->output_queue;
- sd->output_queue = q;
- raise_softirq_irqoff(NET_TX_SOFTIRQ);
- local_irq_restore(flags);
- }
+ local_irq_save(flags);
+ sd = &__get_cpu_var(softnet_data);
+ q->next_sched = sd->output_queue;
+ sd->output_queue = q;
+ raise_softirq_irqoff(NET_TX_SOFTIRQ);
+ local_irq_restore(flags);
+}
+
+void __netif_schedule(struct Qdisc *q)
+{
+ if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state))
+ __netif_reschedule(q);
}
EXPORT_SYMBOL(__netif_schedule);
spin_lock(root_lock);
- rc = qdisc_enqueue_root(skb, q);
- qdisc_run(q);
-
+ if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
+ kfree_skb(skb);
+ rc = NET_XMIT_DROP;
+ } else {
+ rc = qdisc_enqueue_root(skb, q);
+ qdisc_run(q);
+ }
spin_unlock(root_lock);
goto out;
head = head->next_sched;
- smp_mb__before_clear_bit();
- clear_bit(__QDISC_STATE_SCHED, &q->state);
-
root_lock = qdisc_lock(q);
if (spin_trylock(root_lock)) {
+ smp_mb__before_clear_bit();
+ clear_bit(__QDISC_STATE_SCHED,
+ &q->state);
qdisc_run(q);
spin_unlock(root_lock);
} else {
- __netif_schedule(q);
+ if (!test_bit(__QDISC_STATE_DEACTIVATED,
+ &q->state))
+ __netif_reschedule(q);
}
}
}
q = rxq->qdisc;
if (q != &noop_qdisc) {
spin_lock(qdisc_lock(q));
- result = qdisc_enqueue_root(skb, q);
+ if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
+ result = qdisc_enqueue_root(skb, q);
spin_unlock(qdisc_lock(q));
}
static struct gen_estimator_head elist[EST_MAX_INTERVAL+1];
-/* Protects against NULL dereference and RCU write-side */
+/* Protects against NULL dereference */
static DEFINE_RWLOCK(est_lock);
static void est_timer(unsigned long arg)
est->last_packets = bstats->packets;
est->avpps = rate_est->pps<<10;
- write_lock_bh(&est_lock);
if (!elist[idx].timer.function) {
INIT_LIST_HEAD(&elist[idx].list);
setup_timer(&elist[idx].timer, est_timer, idx);
mod_timer(&elist[idx].timer, jiffies + ((HZ/4) << idx));
list_add_rcu(&est->list, &elist[idx].list);
- write_unlock_bh(&est_lock);
return 0;
}
* Removes the rate estimator specified by &bstats and &rate_est
* and deletes the timer.
*
+ * NOTE: Called under rtnl_mutex
*/
void gen_kill_estimator(struct gnet_stats_basic *bstats,
struct gnet_stats_rate_est *rate_est)
if (!elist[idx].timer.function)
continue;
- write_lock_bh(&est_lock);
list_for_each_entry_safe(e, n, &elist[idx].list, list) {
if (e->rate_est != rate_est || e->bstats != bstats)
continue;
+ write_lock_bh(&est_lock);
e->bstats = NULL;
+ write_unlock_bh(&est_lock);
list_del_rcu(&e->list);
call_rcu(&e->e_rcu, __gen_kill_estimator);
}
- write_unlock_bh(&est_lock);
}
}
segs = nskb;
tail = nskb;
- nskb->dev = skb->dev;
- skb_copy_queue_mapping(nskb, skb);
- nskb->priority = skb->priority;
- nskb->protocol = skb->protocol;
- nskb->vlan_tci = skb->vlan_tci;
- nskb->dst = dst_clone(skb->dst);
- memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
- nskb->pkt_type = skb->pkt_type;
+ __copy_skb_header(nskb, skb);
nskb->mac_len = skb->mac_len;
skb_reserve(nskb, headroom);
skb_copy_from_linear_data(skb, skb_put(nskb, doffset),
doffset);
if (!sg) {
+ nskb->ip_summed = CHECKSUM_NONE;
nskb->csum = skb_copy_and_csum_bits(skb, offset,
skb_put(nskb, len),
len, 0);
frag = skb_shinfo(nskb)->frags;
k = 0;
- nskb->ip_summed = CHECKSUM_PARTIAL;
- nskb->csum = skb->csum;
skb_copy_from_linear_data_offset(skb, offset,
skb_put(nskb, hsize), hsize);
struct dccp_sock *dp = dccp_sk(sk);
long tstamp = dccp_timestamp();
- /* Stop the REQUEST timer */
- inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
- WARN_ON(sk->sk_send_head == NULL);
- __kfree_skb(sk->sk_send_head);
- sk->sk_send_head = NULL;
-
if (!between48(DCCP_SKB_CB(skb)->dccpd_ack_seq,
dp->dccps_awl, dp->dccps_awh)) {
dccp_pr_debug("invalid ackno: S.AWL=%llu, "
DCCP_ACKVEC_STATE_RECEIVED))
goto out_invalid_packet; /* FIXME: change error code */
+ /* Stop the REQUEST timer */
+ inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
+ WARN_ON(sk->sk_send_head == NULL);
+ kfree_skb(sk->sk_send_head);
+ sk->sk_send_head = NULL;
+
dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq;
dccp_update_gsr(sk, dp->dccps_isr);
/*
return net->ipv4.icmp_sk[smp_processor_id()];
}
-static inline int icmp_xmit_lock(struct sock *sk)
+static inline struct sock *icmp_xmit_lock(struct net *net)
{
+ struct sock *sk;
+
local_bh_disable();
+ sk = icmp_sk(net);
+
if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
/* This can happen if the output path signals a
* dst_link_failure() for an outgoing ICMP packet.
*/
local_bh_enable();
- return 1;
+ return NULL;
}
- return 0;
+ return sk;
}
static inline void icmp_xmit_unlock(struct sock *sk)
struct ipcm_cookie ipc;
struct rtable *rt = skb->rtable;
struct net *net = dev_net(rt->u.dst.dev);
- struct sock *sk = icmp_sk(net);
- struct inet_sock *inet = inet_sk(sk);
+ struct sock *sk;
+ struct inet_sock *inet;
__be32 daddr;
if (ip_options_echo(&icmp_param->replyopts, skb))
return;
- if (icmp_xmit_lock(sk))
+ sk = icmp_xmit_lock(net);
+ if (sk == NULL)
return;
+ inet = inet_sk(sk);
icmp_param->data.icmph.checksum = 0;
if (!rt)
goto out;
net = dev_net(rt->u.dst.dev);
- sk = icmp_sk(net);
/*
* Find the original header. It is expected to be valid, of course.
}
}
- if (icmp_xmit_lock(sk))
+ sk = icmp_xmit_lock(net);
+ if (sk == NULL)
return;
/*
(info->flags & IPT_ADDRTYPE_INVERT_SOURCE);
if (ret && info->dest)
ret &= match_type(dev, iph->daddr, info->dest) ^
- (info->flags & IPT_ADDRTYPE_INVERT_DEST);
+ !!(info->flags & IPT_ADDRTYPE_INVERT_DEST);
return ret;
}
range_size = ntohs(range->max.all) - min + 1;
}
- off = *rover;
if (range->flags & IP_NAT_RANGE_PROTO_RANDOM)
- off = net_random();
+ off = secure_ipv4_port_ephemeral(tuple->src.u3.ip, tuple->dst.u3.ip,
+ maniptype == IP_NAT_MANIP_SRC
+ ? tuple->dst.u.all
+ : tuple->src.u.all);
+ else
+ off = *rover;
for (i = 0; i < range_size; i++, off++) {
*portptr = htons(min + off % range_size);
return 0;
}
+static void rt_secret_reschedule(int old)
+{
+ struct net *net;
+ int new = ip_rt_secret_interval;
+ int diff = new - old;
+
+ if (!diff)
+ return;
+
+ rtnl_lock();
+ for_each_net(net) {
+ int deleted = del_timer_sync(&net->ipv4.rt_secret_timer);
+
+ if (!new)
+ continue;
+
+ if (deleted) {
+ long time = net->ipv4.rt_secret_timer.expires - jiffies;
+
+ if (time <= 0 || (time += diff) <= 0)
+ time = 0;
+
+ net->ipv4.rt_secret_timer.expires = time;
+ } else
+ net->ipv4.rt_secret_timer.expires = new;
+
+ net->ipv4.rt_secret_timer.expires += jiffies;
+ add_timer(&net->ipv4.rt_secret_timer);
+ }
+ rtnl_unlock();
+}
+
+static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
+ struct file *filp,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int old = ip_rt_secret_interval;
+ int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+
+ rt_secret_reschedule(old);
+
+ return ret;
+}
+
+static int ipv4_sysctl_rt_secret_interval_strategy(ctl_table *table,
+ int __user *name,
+ int nlen,
+ void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval,
+ size_t newlen)
+{
+ int old = ip_rt_secret_interval;
+ int ret = sysctl_jiffies(table, name, nlen, oldval, oldlenp, newval,
+ newlen);
+
+ rt_secret_reschedule(old);
+
+ return ret;
+}
+
static ctl_table ipv4_route_table[] = {
{
.ctl_name = NET_IPV4_ROUTE_GC_THRESH,
.data = &ip_rt_secret_interval,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec_jiffies,
- .strategy = &sysctl_jiffies,
+ .proc_handler = &ipv4_sysctl_rt_secret_interval,
+ .strategy = &ipv4_sysctl_rt_secret_interval_strategy,
},
{ .ctl_name = 0 }
};
net->ipv4.rt_secret_timer.data = (unsigned long)net;
init_timer_deferrable(&net->ipv4.rt_secret_timer);
- net->ipv4.rt_secret_timer.expires =
- jiffies + net_random() % ip_rt_secret_interval +
- ip_rt_secret_interval;
- add_timer(&net->ipv4.rt_secret_timer);
+ if (ip_rt_secret_interval) {
+ net->ipv4.rt_secret_timer.expires =
+ jiffies + net_random() % ip_rt_secret_interval +
+ ip_rt_secret_interval;
+ add_timer(&net->ipv4.rt_secret_timer);
+ }
return 0;
}
return ret;
}
-int ipv6_dev_get_saddr(struct net_device *dst_dev,
+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
const struct in6_addr *daddr, unsigned int prefs,
struct in6_addr *saddr)
{
struct ipv6_saddr_score scores[2],
*score = &scores[0], *hiscore = &scores[1];
- struct net *net = dev_net(dst_dev);
struct ipv6_saddr_dst dst;
struct net_device *dev;
int dst_type;
.fc_dst_len = plen,
.fc_flags = RTF_UP | flags,
.fc_nlinfo.nl_net = dev_net(dev),
+ .fc_protocol = RTPROT_KERNEL,
};
ipv6_addr_copy(&cfg.fc_dst, pfx);
if (flags & RT6_LOOKUP_F_SRCPREF_COA)
srcprefs |= IPV6_PREFER_SRC_COA;
- if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+ if (ipv6_dev_get_saddr(net,
+ ip6_dst_idev(&rt->u.dst)->dev,
&flp->fl6_dst, srcprefs,
&saddr))
goto again;
.flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
};
-static __inline__ int icmpv6_xmit_lock(struct sock *sk)
+static __inline__ struct sock *icmpv6_xmit_lock(struct net *net)
{
+ struct sock *sk;
+
local_bh_disable();
+ sk = icmpv6_sk(net);
if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
/* This can happen if the output path (f.e. SIT or
* ip6ip6 tunnel) signals dst_link_failure() for an
* outgoing ICMP6 packet.
*/
local_bh_enable();
- return 1;
+ return NULL;
}
- return 0;
+ return sk;
}
static __inline__ void icmpv6_xmit_unlock(struct sock *sk)
fl.fl_icmp_code = code;
security_skb_classify_flow(skb, &fl);
- sk = icmpv6_sk(net);
- np = inet6_sk(sk);
-
- if (icmpv6_xmit_lock(sk))
+ sk = icmpv6_xmit_lock(net);
+ if (sk == NULL)
return;
+ np = inet6_sk(sk);
if (!icmpv6_xrlim_allow(sk, type, &fl))
goto out;
fl.fl_icmp_type = ICMPV6_ECHO_REPLY;
security_skb_classify_flow(skb, &fl);
- sk = icmpv6_sk(net);
- np = inet6_sk(sk);
-
- if (icmpv6_xmit_lock(sk))
+ sk = icmpv6_xmit_lock(net);
+ if (sk == NULL)
return;
+ np = inet6_sk(sk);
if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst))
fl.oif = np->mcast_oif;
arg.skb = skb;
arg.cb = cb;
+ arg.net = net;
w->args = &arg;
for (h = s_h; h < FIB_TABLE_HASHSZ; h++, s_e = 0) {
goto out_err_release;
if (ipv6_addr_any(&fl->fl6_src)) {
- err = ipv6_dev_get_saddr(ip6_dst_idev(*dst)->dev,
+ err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
&fl->fl6_dst,
sk ? inet6_sk(sk)->srcprefs : 0,
&fl->fl6_src);
} else {
if (np->rxopt.bits.rxinfo) {
struct in6_pktinfo src_info;
- src_info.ipi6_ifindex = np->mcast_oif;
+ src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
}
}
if (np->rxopt.bits.rxoinfo) {
struct in6_pktinfo src_info;
- src_info.ipi6_ifindex = np->mcast_oif;
+ src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
}
override = 0;
in6_ifa_put(ifp);
} else {
- if (ipv6_dev_get_saddr(dev, daddr,
+ if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
inet6_sk(dev_net(dev)->ipv6.ndisc_sk)->srcprefs,
&tmpaddr))
return;
+ nla_total_size(sizeof(struct rta_cacheinfo));
}
-static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
+static int rt6_fill_node(struct net *net,
+ struct sk_buff *skb, struct rt6_info *rt,
struct in6_addr *dst, struct in6_addr *src,
int iif, int type, u32 pid, u32 seq,
int prefix, int nowait, unsigned int flags)
} else if (dst) {
struct inet6_dev *idev = ip6_dst_idev(&rt->u.dst);
struct in6_addr saddr_buf;
- if (ipv6_dev_get_saddr(idev ? idev->dev : NULL,
+ if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
dst, 0, &saddr_buf) == 0)
NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
}
} else
prefix = 0;
- return rt6_fill_node(arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
+ return rt6_fill_node(arg->net,
+ arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
NETLINK_CB(arg->cb->skb).pid, arg->cb->nlh->nlmsg_seq,
prefix, 0, NLM_F_MULTI);
}
rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
skb->dst = &rt->u.dst;
- err = rt6_fill_node(skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
+ err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
nlh->nlmsg_seq, 0, 0, 0);
if (err < 0) {
if (skb == NULL)
goto errout;
- err = rt6_fill_node(skb, rt, NULL, NULL, 0,
+ err = rt6_fill_node(net, skb, rt, NULL, NULL, 0,
event, info->pid, seq, 0, 0, 0);
if (err < 0) {
/* -EMSGSIZE implies BUG in rt6_nlmsg_size() */
static int xfrm6_get_saddr(xfrm_address_t *saddr, xfrm_address_t *daddr)
{
struct dst_entry *dst;
+ struct net_device *dev;
dst = xfrm6_dst_lookup(0, NULL, daddr);
if (IS_ERR(dst))
return -EHOSTUNREACH;
- ipv6_dev_get_saddr(ip6_dst_idev(dst)->dev,
+ dev = ip6_dst_idev(dst)->dev;
+ ipv6_dev_get_saddr(dev_net(dev), dev,
(struct in6_addr *)&daddr->a6, 0,
(struct in6_addr *)&saddr->a6);
dst_release(dst);
rcu_read_unlock();
return;
}
+ /* update new sta with its last rx activity */
+ sta->last_rx = jiffies;
}
/*
/* need to zero data of old helper */
memset(&help->help, 0, sizeof(help->help));
} else {
- help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+ help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
if (help == NULL)
return -ENOMEM;
}
ct->timeout.expires = jiffies + ct->timeout.expires * HZ;
ct->status |= IPS_CONFIRMED;
+ rcu_read_lock();
+ helper = __nf_ct_helper_find(rtuple);
+ if (helper) {
+ help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
+ if (help == NULL) {
+ rcu_read_unlock();
+ err = -ENOMEM;
+ goto err;
+ }
+ /* not in hash table yet so not strictly necessary */
+ rcu_assign_pointer(help->helper, helper);
+ }
+
if (cda[CTA_STATUS]) {
err = ctnetlink_change_status(ct, cda);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
goto err;
+ }
}
if (cda[CTA_PROTOINFO]) {
err = ctnetlink_change_protoinfo(ct, cda);
- if (err < 0)
+ if (err < 0) {
+ rcu_read_unlock();
goto err;
+ }
}
nf_ct_acct_ext_add(ct, GFP_KERNEL);
ct->mark = ntohl(nla_get_be32(cda[CTA_MARK]));
#endif
- rcu_read_lock();
- helper = __nf_ct_helper_find(rtuple);
- if (helper) {
- help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
- if (help == NULL) {
- rcu_read_unlock();
- err = -ENOMEM;
- goto err;
- }
- /* not in hash table yet so not strictly necessary */
- rcu_assign_pointer(help->helper, helper);
- }
-
/* setup master conntrack: this is a confirmed expectation */
if (master_ct) {
__set_bit(IPS_EXPECTED_BIT, &ct->status);
* calls and handling all the red tape such as issuing notifications
* if the call is successful.
*
+ * Suspended devices are not touched at all, and -EAGAIN is returned.
+ *
* Note that the @force parameter cannot override a (possibly cached)
* state of RFKILL_STATE_HARD_BLOCKED. Any device making use of
* RFKILL_STATE_HARD_BLOCKED implements either get_state() or
int retval = 0;
enum rfkill_state oldstate, newstate;
+ if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+ return -EBUSY;
+
oldstate = rfkill->state;
if (rfkill->get_state && !force &&
*
* This function toggles the state of all switches of given type,
* unless a specific switch is claimed by userspace (in which case,
- * that switch is left alone).
+ * that switch is left alone) or suspended.
*/
void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
{
/**
* rfkill_epo - emergency power off all transmitters
*
- * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex and rfkill->mutex.
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_mutex and rfkill->mutex.
*/
void rfkill_epo(void)
{
if (dev->power.power_state.event != PM_EVENT_ON) {
mutex_lock(&rfkill->mutex);
+ dev->power.power_state.event = PM_EVENT_ON;
+
/* restore radio state AND notify everybody */
rfkill_toggle_radio(rfkill, rfkill->state, 1);
mutex_unlock(&rfkill->mutex);
}
- dev->power.power_state = PMSG_ON;
return 0;
}
#else
if (n->nlmsg_type == RTM_DELTFILTER && t->tcm_handle == 0) {
spin_lock_bh(root_lock);
*back = tp->next;
- spin_lock_bh(root_lock);
+ spin_unlock_bh(root_lock);
tfilter_notify(skb, n, tp, fh, RTM_DELTFILTER);
tcf_destroy(tp);
#include <linux/kmod.h>
#include <linux/list.h>
#include <linux/hrtimer.h>
+#include <linux/lockdep.h>
#include <net/net_namespace.h>
#include <net/sock.h>
return NULL;
}
+/*
+ * This lock is needed until some qdiscs stop calling qdisc_tree_decrease_qlen()
+ * without rtnl_lock(); currently hfsc_dequeue(), netem_dequeue(), tbf_dequeue()
+ */
+static DEFINE_SPINLOCK(qdisc_list_lock);
+
+static void qdisc_list_add(struct Qdisc *q)
+{
+ if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+ spin_lock_bh(&qdisc_list_lock);
+ list_add_tail(&q->list, &qdisc_root_sleeping(q)->list);
+ spin_unlock_bh(&qdisc_list_lock);
+ }
+}
+
+void qdisc_list_del(struct Qdisc *q)
+{
+ if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+ spin_lock_bh(&qdisc_list_lock);
+ list_del(&q->list);
+ spin_unlock_bh(&qdisc_list_lock);
+ }
+}
+EXPORT_SYMBOL(qdisc_list_del);
+
struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle)
{
unsigned int i;
+ struct Qdisc *q;
+
+ spin_lock_bh(&qdisc_list_lock);
for (i = 0; i < dev->num_tx_queues; i++) {
struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
- struct Qdisc *q, *txq_root = txq->qdisc_sleeping;
+ struct Qdisc *txq_root = txq->qdisc_sleeping;
q = qdisc_match_from_root(txq_root, handle);
if (q)
- return q;
+ goto unlock;
}
- return qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+ q = qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+unlock:
+ spin_unlock_bh(&qdisc_list_lock);
+
+ return q;
}
static struct Qdisc *qdisc_leaf(struct Qdisc *p, u32 classid)
if (!s || tsize != s->tsize || (!tab && tsize > 0))
return ERR_PTR(-EINVAL);
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
list_for_each_entry(stab, &qdisc_stab_list, list) {
if (memcmp(&stab->szopts, s, sizeof(*s)))
if (tsize > 0 && memcmp(stab->data, tab, tsize * sizeof(u16)))
continue;
stab->refcnt++;
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
return stab;
}
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
stab = kmalloc(sizeof(*stab) + tsize * sizeof(u16), GFP_KERNEL);
if (!stab)
if (tsize > 0)
memcpy(stab->data, tab, tsize * sizeof(u16));
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
list_add_tail(&stab->list, &qdisc_stab_list);
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
return stab;
}
if (!tab)
return;
- spin_lock_bh(&qdisc_stab_lock);
+ spin_lock(&qdisc_stab_lock);
if (--tab->refcnt == 0) {
list_del(&tab->list);
kfree(tab);
}
- spin_unlock_bh(&qdisc_stab_lock);
+ spin_unlock(&qdisc_stab_lock);
}
EXPORT_SYMBOL(qdisc_put_stab);
wd->qdisc->flags &= ~TCQ_F_THROTTLED;
smp_wmb();
- __netif_schedule(wd->qdisc);
+ __netif_schedule(qdisc_root(wd->qdisc));
return HRTIMER_NORESTART;
}
{
ktime_t time;
+ if (test_bit(__QDISC_STATE_DEACTIVATED,
+ &qdisc_root_sleeping(wd->qdisc)->state))
+ return;
+
wd->qdisc->flags |= TCQ_F_THROTTLED;
time = ktime_set(0, 0);
time = ktime_add_ns(time, PSCHED_US2NS(expires));
if (new || old)
qdisc_notify(skb, n, clid, old, new);
- if (old) {
- spin_lock_bh(&old->q.lock);
+ if (old)
qdisc_destroy(old);
- spin_unlock_bh(&old->q.lock);
- }
}
/* Graft qdisc "new" to class "classid" of qdisc "parent" or
return err;
}
+/* lockdep annotation is needed for ingress; egress gets it only for name */
+static struct lock_class_key qdisc_tx_lock;
+static struct lock_class_key qdisc_rx_lock;
+
/*
Allocate and initialize new qdisc.
if (handle == TC_H_INGRESS) {
sch->flags |= TCQ_F_INGRESS;
handle = TC_H_MAKE(TC_H_INGRESS, 0);
+ lockdep_set_class(qdisc_lock(sch), &qdisc_rx_lock);
} else {
if (handle == 0) {
handle = qdisc_alloc_handle(dev);
if (handle == 0)
goto err_out3;
}
+ lockdep_set_class(qdisc_lock(sch), &qdisc_tx_lock);
}
sch->handle = handle;
goto err_out3;
}
}
- if ((parent != TC_H_ROOT) && !(sch->flags & TCQ_F_INGRESS))
- list_add_tail(&sch->list, &dev_queue->qdisc_sleeping->list);
+
+ qdisc_list_add(sch);
return sch;
}
}
graft:
- if (1) {
- spinlock_t *root_lock;
-
- err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
- if (err) {
- if (q) {
- root_lock = qdisc_root_lock(q);
- spin_lock_bh(root_lock);
- qdisc_destroy(q);
- spin_unlock_bh(root_lock);
- }
- return err;
- }
+ err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
+ if (err) {
+ if (q)
+ qdisc_destroy(q);
+ return err;
}
+
return 0;
}
struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
psched_tdiff_t delay = cl->undertime - q->now;
+ if (test_bit(__QDISC_STATE_DEACTIVATED,
+ &qdisc_root_sleeping(cl->qdisc)->state))
+ return;
+
if (!cl->delayed) {
psched_time_t sched = q->now;
ktime_t expires;
}
sch->flags &= ~TCQ_F_THROTTLED;
- __netif_schedule(sch);
+ __netif_schedule(qdisc_root(sch));
return HRTIMER_NORESTART;
}
}
EXPORT_SYMBOL(qdisc_reset);
-/* this is the rcu callback function to clean up a qdisc when there
- * are no further references to it */
-
-static void __qdisc_destroy(struct rcu_head *head)
+void qdisc_destroy(struct Qdisc *qdisc)
{
- struct Qdisc *qdisc = container_of(head, struct Qdisc, q_rcu);
const struct Qdisc_ops *ops = qdisc->ops;
+ if (qdisc->flags & TCQ_F_BUILTIN ||
+ !atomic_dec_and_test(&qdisc->refcnt))
+ return;
+
#ifdef CONFIG_NET_SCHED
+ qdisc_list_del(qdisc);
+
qdisc_put_stab(qdisc->stab);
#endif
gen_kill_estimator(&qdisc->bstats, &qdisc->rate_est);
kfree((char *) qdisc - qdisc->padded);
}
-
-/* Under qdisc_lock(qdisc) and BH! */
-
-void qdisc_destroy(struct Qdisc *qdisc)
-{
- if (qdisc->flags & TCQ_F_BUILTIN ||
- !atomic_dec_and_test(&qdisc->refcnt))
- return;
-
- if (qdisc->parent)
- list_del(&qdisc->list);
-
- call_rcu(&qdisc->q_rcu, __qdisc_destroy);
-}
EXPORT_SYMBOL(qdisc_destroy);
static bool dev_all_qdisc_sleeping_noop(struct net_device *dev)
struct Qdisc *new_qdisc = dev_queue->qdisc_sleeping;
int *need_watchdog_p = _need_watchdog;
+ if (!(new_qdisc->flags & TCQ_F_BUILTIN))
+ clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
+
rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
*need_watchdog_p = 1;
if (qdisc) {
spin_lock_bh(qdisc_lock(qdisc));
+ if (!(qdisc->flags & TCQ_F_BUILTIN))
+ set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
+
dev_queue->qdisc = qdisc_default;
qdisc_reset(qdisc);
}
}
-static bool some_qdisc_is_busy(struct net_device *dev, int lock)
+static bool some_qdisc_is_busy(struct net_device *dev)
{
unsigned int i;
q = dev_queue->qdisc_sleeping;
root_lock = qdisc_lock(q);
- if (lock)
- spin_lock_bh(root_lock);
+ spin_lock_bh(root_lock);
val = (test_bit(__QDISC_STATE_RUNNING, &q->state) ||
test_bit(__QDISC_STATE_SCHED, &q->state));
- if (lock)
- spin_unlock_bh(root_lock);
+ spin_unlock_bh(root_lock);
if (val)
return true;
void dev_deactivate(struct net_device *dev)
{
- bool running;
-
netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
synchronize_rcu();
/* Wait for outstanding qdisc_run calls. */
- do {
- while (some_qdisc_is_busy(dev, 0))
- yield();
-
- /*
- * Double-check inside queue lock to ensure that all effects
- * of the queue run are visible when we return.
- */
- running = some_qdisc_is_busy(dev, 1);
-
- /*
- * The running flag should never be set at this point because
- * we've already set dev->qdisc to noop_qdisc *inside* the same
- * pair of spin locks. That is, if any qdisc_run starts after
- * our initial test it should see the noop_qdisc and then
- * clear the RUNNING bit before dropping the queue lock. So
- * if it is set here then we've found a bug.
- */
- } while (WARN_ON_ONCE(running));
+ while (some_qdisc_is_busy(dev))
+ yield();
}
static void dev_init_scheduler_queue(struct net_device *dev,
struct Qdisc *qdisc_default = _qdisc_default;
if (qdisc) {
- spinlock_t *root_lock = qdisc_lock(qdisc);
-
dev_queue->qdisc = qdisc_default;
dev_queue->qdisc_sleeping = qdisc_default;
- spin_lock_bh(root_lock);
qdisc_destroy(qdisc);
- spin_unlock_bh(root_lock);
}
}
sch->qstats.drops++;
cl->qstats.drops++;
}
- return NET_XMIT_DROP;
+ return ret;
} else {
cl->bstats.packets +=
skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
sch->qstats.drops++;
cl->qstats.drops++;
}
- return NET_XMIT_DROP;
+ return ret;
} else
htb_activate(q, cl);
if ((ret = qdisc->ops->requeue(skb, qdisc)) == NET_XMIT_SUCCESS) {
sch->q.qlen++;
sch->qstats.requeues++;
- return 0;
+ return NET_XMIT_SUCCESS;
}
if (net_xmit_drop_count(ret))
sch->qstats.drops++;
- return NET_XMIT_DROP;
+ return ret;
}
struct tbf_sched_data *q = qdisc_priv(sch);
int ret;
- if (qdisc_pkt_len(skb) > q->max_size) {
- sch->qstats.drops++;
-#ifdef CONFIG_NET_CLS_ACT
- if (sch->reshape_fail == NULL || sch->reshape_fail(skb, sch))
-#endif
- kfree_skb(skb);
-
- return NET_XMIT_DROP;
- }
+ if (qdisc_pkt_len(skb) > q->max_size)
+ return qdisc_reshape_fail(skb, sch);
ret = qdisc_enqueue(skb, q->qdisc);
if (ret != 0) {
/* Initialize the CHUNKS parameter */
auth_chunks->param_hdr.type = SCTP_PARAM_CHUNKS;
+ auth_chunks->param_hdr.length = htons(sizeof(sctp_paramhdr_t));
/* If the Add-IP functionality is enabled, we must
* authenticate, ASCONF and ASCONF-ACK chunks
if (sctp_addip_enable) {
auth_chunks->chunks[0] = SCTP_CID_ASCONF;
auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
- auth_chunks->param_hdr.length =
- htons(sizeof(sctp_paramhdr_t) + 2);
+ auth_chunks->param_hdr.length += htons(2);
}
}
__func__, asoc, dst, NIP6(daddr->v6.sin6_addr));
if (!asoc) {
- ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
+ ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
+ dst ? ip6_dst_idev(dst)->dev : NULL,
&daddr->v6.sin6_addr,
inet6_sk(&sk->inet.sk)->srcprefs,
&saddr->v6.sin6_addr);
{
struct sctp_authchunk val;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authchunk))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
struct sctp_hmacalgo *hmacs;
int err;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen < sizeof(struct sctp_hmacalgo))
return -EINVAL;
struct sctp_association *asoc;
int ret;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen <= sizeof(struct sctp_authkey))
return -EINVAL;
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (optlen != sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, optlen))
static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
char __user *optval, int __user *optlen)
{
+ struct sctp_hmacalgo __user *p = (void __user *)optval;
struct sctp_hmac_algo_param *hmacs;
- __u16 param_len;
+ __u16 data_len = 0;
+ u32 num_idents;
+
+ if (!sctp_auth_enable)
+ return -EACCES;
hmacs = sctp_sk(sk)->ep->auth_hmacs_list;
- param_len = ntohs(hmacs->param_hdr.length);
+ data_len = ntohs(hmacs->param_hdr.length) - sizeof(sctp_paramhdr_t);
- if (len < param_len)
+ if (len < sizeof(struct sctp_hmacalgo) + data_len)
return -EINVAL;
+
+ len = sizeof(struct sctp_hmacalgo) + data_len;
+ num_idents = data_len / sizeof(u16);
+
if (put_user(len, optlen))
return -EFAULT;
- if (copy_to_user(optval, hmacs->hmac_ids, len))
+ if (put_user(num_idents, &p->shmac_num_idents))
+ return -EFAULT;
+ if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
return -EFAULT;
-
return 0;
}
struct sctp_authkeyid val;
struct sctp_association *asoc;
+ if (!sctp_auth_enable)
+ return -EACCES;
+
if (len < sizeof(struct sctp_authkeyid))
return -EINVAL;
if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid)))
else
val.scact_keynumber = sctp_sk(sk)->ep->active_key_id;
+ len = sizeof(struct sctp_authkeyid);
+ if (put_user(len, optlen))
+ return -EFAULT;
+ if (copy_to_user(optval, &val, len))
+ return -EFAULT;
+
return 0;
}
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
- u32 num_chunks;
+ u32 num_chunks = 0;
char __user *to;
- if (len <= sizeof(struct sctp_authchunks))
+ if (!sctp_auth_enable)
+ return -EACCES;
+
+ if (len < sizeof(struct sctp_authchunks))
return -EINVAL;
- if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+ if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
return -EFAULT;
to = p->gauth_chunks;
return -EINVAL;
ch = asoc->peer.peer_chunks;
+ if (!ch)
+ goto num;
/* See if the user provided enough room for all the data */
num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
if (len < num_chunks)
return -EINVAL;
- len = num_chunks;
- if (put_user(len, optlen))
+ if (copy_to_user(to, ch->chunks, num_chunks))
return -EFAULT;
+num:
+ len = sizeof(struct sctp_authchunks) + num_chunks;
+ if (put_user(len, optlen)) return -EFAULT;
if (put_user(num_chunks, &p->gauth_number_of_chunks))
return -EFAULT;
- if (copy_to_user(to, ch->chunks, len))
- return -EFAULT;
-
return 0;
}
struct sctp_authchunks val;
struct sctp_association *asoc;
struct sctp_chunks_param *ch;
- u32 num_chunks;
+ u32 num_chunks = 0;
char __user *to;
- if (len <= sizeof(struct sctp_authchunks))
+ if (!sctp_auth_enable)
+ return -EACCES;
+
+ if (len < sizeof(struct sctp_authchunks))
return -EINVAL;
- if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+ if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
return -EFAULT;
to = p->gauth_chunks;
else
ch = sctp_sk(sk)->ep->auth_chunk_list;
+ if (!ch)
+ goto num;
+
num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
- if (len < num_chunks)
+ if (len < sizeof(struct sctp_authchunks) + num_chunks)
return -EINVAL;
- len = num_chunks;
+ if (copy_to_user(to, ch->chunks, num_chunks))
+ return -EFAULT;
+num:
+ len = sizeof(struct sctp_authchunks) + num_chunks;
if (put_user(len, optlen))
return -EFAULT;
if (put_user(num_chunks, &p->gauth_number_of_chunks))
return -EFAULT;
- if (copy_to_user(to, ch->chunks, len))
- return -EFAULT;
return 0;
}
struct module *mod)
{
const unsigned long id_size = sizeof(struct pnp_device_id);
- const struct pnp_device_id *id = symval;
+ const unsigned int count = (size / id_size)-1;
+ const struct pnp_device_id *devs = symval;
+ unsigned int i;
device_id_check(mod->name, "pnp", size, id_size, symval);
- buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
- buf_printf(&mod->dev_table_buf,
- "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
+ for (i = 0; i < count; i++) {
+ const char *id = (char *)devs[i].id;
+
+ buf_printf(&mod->dev_table_buf,
+ "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+ buf_printf(&mod->dev_table_buf,
+ "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+ }
}
/* looks like: "pnp:dD" for every device of the card */
void security_fixup_ops(struct security_operations *ops)
{
- set_to_cap_if_null(ops, ptrace);
+ set_to_cap_if_null(ops, ptrace_may_access);
+ set_to_cap_if_null(ops, ptrace_traceme);
set_to_cap_if_null(ops, capget);
set_to_cap_if_null(ops, capset_check);
set_to_cap_if_null(ops, capset_set);
return 0;
}
-int cap_ptrace (struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int cap_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
/* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
- if (!cap_issubset(child->cap_permitted, parent->cap_permitted) &&
- !__capable(parent, CAP_SYS_PTRACE))
- return -EPERM;
- return 0;
+ if (cap_issubset(child->cap_permitted, current->cap_permitted))
+ return 0;
+ if (capable(CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
+}
+
+int cap_ptrace_traceme(struct task_struct *parent)
+{
+ /* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */
+ if (cap_issubset(current->cap_permitted, parent->cap_permitted))
+ return 0;
+ if (has_capability(parent, CAP_SYS_PTRACE))
+ return 0;
+ return -EPERM;
}
int cap_capget (struct task_struct *target, kernel_cap_t *effective,
static inline int cap_safe_nice(struct task_struct *p)
{
if (!cap_issubset(p->cap_permitted, current->cap_permitted) &&
- !__capable(current, CAP_SYS_NICE))
+ !capable(CAP_SYS_NICE))
return -EPERM;
return 0;
}
static struct security_operations rootplug_security_ops = {
/* Use the capability functions for some of the hooks */
- .ptrace = cap_ptrace,
+ .ptrace_may_access = cap_ptrace_may_access,
+ .ptrace_traceme = cap_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
/* Security operations */
-int security_ptrace(struct task_struct *parent, struct task_struct *child,
- unsigned int mode)
+int security_ptrace_may_access(struct task_struct *child, unsigned int mode)
{
- return security_ops->ptrace(parent, child, mode);
+ return security_ops->ptrace_may_access(child, mode);
+}
+
+int security_ptrace_traceme(struct task_struct *parent)
+{
+ return security_ops->ptrace_traceme(parent);
}
int security_capget(struct task_struct *target,
/* Hook functions begin here. */
-static int selinux_ptrace(struct task_struct *parent,
- struct task_struct *child,
- unsigned int mode)
+static int selinux_ptrace_may_access(struct task_struct *child,
+ unsigned int mode)
{
int rc;
- rc = secondary_ops->ptrace(parent, child, mode);
+ rc = secondary_ops->ptrace_may_access(child, mode);
if (rc)
return rc;
if (mode == PTRACE_MODE_READ) {
- struct task_security_struct *tsec = parent->security;
+ struct task_security_struct *tsec = current->security;
struct task_security_struct *csec = child->security;
return avc_has_perm(tsec->sid, csec->sid,
SECCLASS_FILE, FILE__READ, NULL);
}
- return task_has_perm(parent, child, PROCESS__PTRACE);
+ return task_has_perm(current, child, PROCESS__PTRACE);
+}
+
+static int selinux_ptrace_traceme(struct task_struct *parent)
+{
+ int rc;
+
+ rc = secondary_ops->ptrace_traceme(parent);
+ if (rc)
+ return rc;
+
+ return task_has_perm(parent, current, PROCESS__PTRACE);
}
static int selinux_capget(struct task_struct *target, kernel_cap_t *effective,
static struct security_operations selinux_ops = {
.name = "selinux",
- .ptrace = selinux_ptrace,
+ .ptrace_may_access = selinux_ptrace_may_access,
+ .ptrace_traceme = selinux_ptrace_traceme,
.capget = selinux_capget,
.capset_check = selinux_capset_check,
.capset_set = selinux_capset_set,
*/
/**
- * smack_ptrace - Smack approval on ptrace
- * @ptp: parent task pointer
+ * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH
* @ctp: child task pointer
*
* Returns 0 if access is OK, an error code otherwise
*
* Do the capability checks, and require read and write.
*/
-static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp,
- unsigned int mode)
+static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode)
{
int rc;
- rc = cap_ptrace(ptp, ctp, mode);
+ rc = cap_ptrace_may_access(ctp, mode);
if (rc != 0)
return rc;
- rc = smk_access(ptp->security, ctp->security, MAY_READWRITE);
- if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE))
+ rc = smk_access(current->security, ctp->security, MAY_READWRITE);
+ if (rc != 0 && capable(CAP_MAC_OVERRIDE))
return 0;
+ return rc;
+}
+
+/**
+ * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME
+ * @ptp: parent task pointer
+ *
+ * Returns 0 if access is OK, an error code otherwise
+ *
+ * Do the capability checks, and require read and write.
+ */
+static int smack_ptrace_traceme(struct task_struct *ptp)
+{
+ int rc;
+
+ rc = cap_ptrace_traceme(ptp);
+ if (rc != 0)
+ return rc;
+ rc = smk_access(ptp->security, current->security, MAY_READWRITE);
+ if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE))
+ return 0;
return rc;
}
*/
file = container_of(fown, struct file, f_owner);
rc = smk_access(file->f_security, tsk->security, MAY_WRITE);
- if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE))
+ if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE))
return 0;
return rc;
}
* account for the smack labels having gotten to
* be different in the first place.
*
- * This breaks the strict subjet/object access
+ * This breaks the strict subject/object access
* control ideal, taking the object's privilege
* state into account in the decision as well as
* the smack value.
*/
- if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE))
+ if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE))
return 0;
return rc;
{
char *newsmack;
- if (!__capable(p, CAP_MAC_ADMIN))
- return -EPERM;
-
/*
* Changing another process' Smack value is too dangerous
* and supports no sane use case.
if (p != current)
return -EPERM;
+ if (!capable(CAP_MAC_ADMIN))
+ return -EPERM;
+
if (value == NULL || size == 0 || size >= SMK_LABELLEN)
return -EINVAL;
struct security_operations smack_ops = {
.name = "smack",
- .ptrace = smack_ptrace,
+ .ptrace_may_access = smack_ptrace_may_access,
+ .ptrace_traceme = smack_ptrace_traceme,
.capget = cap_capget,
.capset_check = cap_capset_check,
.capset_set = cap_capset_set,
* all processes and objects when they are created.
*/
security_initcall(smack_init);
-
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/version.h>
#include <sound/core.h>
#include <sound/initval.h>
#include <sound/pcm.h>
select SND_OXYGEN_LIB
help
Say Y here to include support for sound cards based on the
- Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X.
+ Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X.
To compile this driver as a module, choose M here: the module
will be called snd-virtuoso.
/* Defines for Nvidia HDA support */
#define NVIDIA_HDA_TRANSREG_ADDR 0x4e
#define NVIDIA_HDA_ENABLE_COHBITS 0x0f
+#define NVIDIA_HDA_ISTRM_COH 0x4d
+#define NVIDIA_HDA_OSTRM_COH 0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT 0x01
/* Defines for Intel SCH HDA snoop control */
#define INTEL_SCH_HDA_DEVC 0x78
update_pci_byte(chip->pci,
NVIDIA_HDA_TRANSREG_ADDR,
0x0f, NVIDIA_HDA_ENABLE_COHBITS);
+ update_pci_byte(chip->pci,
+ NVIDIA_HDA_ISTRM_COH,
+ 0x01, NVIDIA_HDA_ENABLE_COHBIT);
+ update_pci_byte(chip->pci,
+ NVIDIA_HDA_OSTRM_COH,
+ 0x01, NVIDIA_HDA_ENABLE_COHBIT);
break;
case AZX_DRIVER_SCH:
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
tmp | 0x2010);
break;
case 0x10ec0888:
- alc888_coef_init(codec);
+ /*alc888_coef_init(codec);*/ /* called in alc_init() */
break;
case 0x10ec0267:
case 0x10ec0268:
unsigned int i;
alc_fix_pll(codec);
+ if (codec->vendor_id == 0x10ec0888)
+ alc888_coef_init(codec);
for (i = 0; i < spec->num_init_verbs; i++)
snd_hda_sequence_write(codec, spec->init_verbs[i]);
}
}
+static void alc882_auto_init_input_src(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+ const struct hda_input_mux *imux = spec->input_mux;
+ int c;
+
+ for (c = 0; c < spec->num_adc_nids; c++) {
+ hda_nid_t conn_list[HDA_MAX_NUM_INPUTS];
+ hda_nid_t nid = spec->capsrc_nids[c];
+ int conns, mute, idx, item;
+
+ conns = snd_hda_get_connections(codec, nid, conn_list,
+ ARRAY_SIZE(conn_list));
+ if (conns < 0)
+ continue;
+ for (idx = 0; idx < conns; idx++) {
+ /* if the current connection is the selected one,
+ * unmute it as default - otherwise mute it
+ */
+ mute = AMP_IN_MUTE(idx);
+ for (item = 0; item < imux->num_items; item++) {
+ if (imux->items[item].index == idx) {
+ if (spec->cur_mux[c] == item)
+ mute = AMP_IN_UNMUTE(idx);
+ break;
+ }
+ }
+ snd_hda_codec_write(codec, nid, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, mute);
+ }
+ }
+}
+
/* add mic boosts if needed */
static int alc_auto_add_mic_boost(struct hda_codec *codec)
{
alc882_auto_init_multi_out(codec);
alc882_auto_init_hp_out(codec);
alc882_auto_init_analog_input(codec);
+ alc882_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc883_auto_init_input_src alc882_auto_init_input_src
+
/* almost identical with ALC880 parser... */
static int alc883_parse_auto_config(struct hda_codec *codec)
{
alc883_auto_init_multi_out(codec);
alc883_auto_init_hp_out(codec);
alc883_auto_init_analog_input(codec);
+ alc883_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
codec->patch_ops = alc_patch_ops;
if (board_config == ALC883_AUTO)
spec->init_hook = alc883_auto_init;
- else if (codec->vendor_id == 0x10ec0888)
- spec->init_hook = alc888_coef_init;
#ifdef CONFIG_SND_HDA_POWER_SAVE
if (!spec->loopback.amplist)
#define alc262_auto_init_multi_out alc882_auto_init_multi_out
#define alc262_auto_init_hp_out alc882_auto_init_hp_out
#define alc262_auto_init_analog_input alc882_auto_init_analog_input
+#define alc262_auto_init_input_src alc882_auto_init_input_src
/* init callback for auto-configuration model -- overriding the default init */
alc262_auto_init_multi_out(codec);
alc262_auto_init_hp_out(codec);
alc262_auto_init_analog_input(codec);
+ alc262_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc861vd_auto_init_input_src alc882_auto_init_input_src
+
#define alc861vd_idx_to_mixer_vol(nid) ((nid) + 0x02)
#define alc861vd_idx_to_mixer_switch(nid) ((nid) + 0x0c)
alc861vd_auto_init_multi_out(codec);
alc861vd_auto_init_hp_out(codec);
alc861vd_auto_init_analog_input(codec);
+ alc861vd_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
}
}
+#define alc662_auto_init_input_src alc882_auto_init_input_src
+
static int alc662_parse_auto_config(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
alc662_auto_init_multi_out(codec);
alc662_auto_init_hp_out(codec);
alc662_auto_init_analog_input(codec);
+ alc662_auto_init_input_src(codec);
if (spec->unsol_event)
alc_sku_automute(codec);
}
*/
/*
- * Xonar DX
- * --------
+ * Xonar D1/DX
+ * -----------
*
* CMI8788:
*
* I²C <-> CS4398 (front)
* <-> CS4362A (surround, center/LFE, back)
*
- * GPI 0 <- external power present
+ * GPI 0 <- external power present (DX only)
*
* GPIO 0 -> enable output to speakers
* GPIO 1 -> enable front panel I/O
enum {
MODEL_D2,
MODEL_D2X,
+ MODEL_D1,
MODEL_DX,
};
{ OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 },
{ OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX },
{ OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X },
+ { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 },
{ }
};
MODULE_DEVICE_TABLE(pci, xonar_ids);
cs4362a_write(chip, 0x01, CS4362A_CPEN);
}
-static void xonar_dx_init(struct oxygen *chip)
+static void xonar_d1_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 800;
data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
- data->ext_power_reg = OXYGEN_GPI_DATA;
- data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
- data->ext_power_bit = GPI_DX_EXT_POWER;
data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
data->cs4362a_fm = CS4362A_FM_SINGLE |
CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
snd_component_add(chip->card, "CS5361");
}
+static void xonar_dx_init(struct oxygen *chip)
+{
+ struct xonar_data *data = chip->model_data;
+
+ data->ext_power_reg = OXYGEN_GPI_DATA;
+ data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
+ data->ext_power_bit = GPI_DX_EXT_POWER;
+ xonar_d1_init(chip);
+}
+
static void xonar_cleanup(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit);
}
-static void xonar_dx_cleanup(struct oxygen *chip)
+static void xonar_d1_cleanup(struct oxygen *chip)
{
xonar_cleanup(chip);
cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
xonar_enable_output(chip);
}
-static void xonar_dx_resume(struct oxygen *chip)
+static void xonar_d1_resume(struct oxygen *chip)
{
cs43xx_init(chip);
xonar_enable_output(chip);
.put = front_panel_put,
};
-static void xonar_dx_ac97_switch(struct oxygen *chip,
+static void xonar_d1_ac97_switch(struct oxygen *chip,
unsigned int reg, unsigned int mute)
{
if (reg == AC97_LINE) {
return 0;
}
-static int xonar_dx_control_filter(struct snd_kcontrol_new *template)
+static int xonar_d1_control_filter(struct snd_kcontrol_new *template)
{
if (!strncmp(template->name, "CD Capture ", 11))
return 1; /* no CD input */
return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip));
}
-static int xonar_dx_mixer_init(struct oxygen *chip)
+static int xonar_d1_mixer_init(struct oxygen *chip)
{
return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip));
}
.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
},
+ [MODEL_D1] = {
+ .shortname = "Xonar D1",
+ .longname = "Asus Virtuoso 100",
+ .chip = "AV200",
+ .owner = THIS_MODULE,
+ .init = xonar_d1_init,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
+ .set_dac_params = set_cs43xx_params,
+ .set_adc_params = set_cs53x1_params,
+ .update_dac_volume = update_cs43xx_volume,
+ .update_dac_mute = update_cs43xx_mute,
+ .ac97_switch = xonar_d1_ac97_switch,
+ .dac_tlv = cs4362a_db_scale,
+ .model_data_size = sizeof(struct xonar_data),
+ .pcm_dev_cfg = PLAYBACK_0_TO_I2S |
+ PLAYBACK_1_TO_SPDIF |
+ CAPTURE_0_FROM_I2S_2,
+ .dac_channels = 8,
+ .dac_volume_min = 0,
+ .dac_volume_max = 127,
+ .function_flags = OXYGEN_FUNCTION_2WIRE,
+ .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+ },
[MODEL_DX] = {
.shortname = "Xonar DX",
.longname = "Asus Virtuoso 100",
.chip = "AV200",
.owner = THIS_MODULE,
.init = xonar_dx_init,
- .control_filter = xonar_dx_control_filter,
- .mixer_init = xonar_dx_mixer_init,
- .cleanup = xonar_dx_cleanup,
- .suspend = xonar_dx_cleanup,
- .resume = xonar_dx_resume,
+ .control_filter = xonar_d1_control_filter,
+ .mixer_init = xonar_d1_mixer_init,
+ .cleanup = xonar_d1_cleanup,
+ .suspend = xonar_d1_cleanup,
+ .resume = xonar_d1_resume,
.set_dac_params = set_cs43xx_params,
.set_adc_params = set_cs53x1_params,
.update_dac_volume = update_cs43xx_volume,
.update_dac_mute = update_cs43xx_mute,
.gpio_changed = xonar_gpio_changed,
- .ac97_switch = xonar_dx_ac97_switch,
+ .ac97_switch = xonar_d1_ac97_switch,
.dac_tlv = cs4362a_db_scale,
.model_data_size = sizeof(struct xonar_data),
.pcm_dev_cfg = PLAYBACK_0_TO_I2S |
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/timer.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
0x0003, /* R35 - ClassD1 */
0x0000, /* R36 */
0x0100, /* R37 - ClassD3 */
- 0x0000, /* R38 */
+ 0x0079, /* R38 - ClassD4 */
0x0000, /* R39 - Input Mixer1 */
0x0000, /* R40 - Input Mixer2 */
0x0000, /* R41 - Input Mixer3 */
WM8990_CDMODE_BIT, 1, 0),
SOC_SINGLE("Speaker Output Attenuation Volume", WM8990_SPEAKER_VOLUME,
- WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0),
+ WM8990_SPKATTN_SHIFT, WM8990_SPKATTN_MASK, 0),
SOC_SINGLE("Speaker DC Boost Volume", WM8990_CLASSD3,
WM8990_DCGAIN_SHIFT, WM8990_DCGAIN_MASK, 0),
SOC_SINGLE("Speaker AC Boost Volume", WM8990_CLASSD3,
WM8990_ACGAIN_SHIFT, WM8990_ACGAIN_MASK, 0),
+SOC_SINGLE_TLV("Speaker Volume", WM8990_CLASSD4,
+ WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0, out_pga_tlv),
+SOC_SINGLE("Speaker ZC Switch", WM8990_CLASSD4,
+ WM8990_SPKZC_SHIFT, WM8990_SPKZC_MASK, 0),
SOC_WM899X_OUTPGA_SINGLE_R_TLV("Left DAC Digital Volume",
WM8990_LEFT_DAC_DIGITAL_VOLUME,
{"SPKMIX", "SPKMIX Left Mixer PGA Switch", "LOPGA"},
{"SPKMIX", "SPKMIX Right Mixer PGA Switch", "ROPGA"},
{"SPKMIX", "SPKMIX Right DAC Switch", "Right DAC"},
- {"SPKMIX", "SPKMIX Left DAC Switch", "Right DAC"},
+ {"SPKMIX", "SPKMIX Left DAC Switch", "Left DAC"},
/* LONMIX */
{"LONMIX", "LONMIX Left Mixer PGA Switch", "LOPGA"},
#define WM8990_SPEAKER_VOLUME 0x22
#define WM8990_CLASSD1 0x23
#define WM8990_CLASSD3 0x25
+#define WM8990_CLASSD4 0x26
#define WM8990_INPUT_MIXER1 0x27
#define WM8990_INPUT_MIXER2 0x28
#define WM8990_INPUT_MIXER3 0x29
/*
* R34 (0x22) - Speaker Volume
*/
-#define WM8990_SPKVOL_MASK 0x0003 /* SPKVOL - [1:0] */
-#define WM8990_SPKVOL_SHIFT 0
+#define WM8990_SPKATTN_MASK 0x0003 /* SPKATTN - [1:0] */
+#define WM8990_SPKATTN_SHIFT 0
/*
* R35 (0x23) - ClassD1
#define WM8990_DCGAIN_SHIFT 3
#define WM8990_ACGAIN_MASK 0x0007 /* ACGAIN - [2:0] */
#define WM8990_ACGAIN_SHIFT 0
+
+/*
+ * R38 (0x26) - ClassD4
+ */
+#define WM8990_SPKZC_MASK 0x0001 /* SPKZC */
+#define WM8990_SPKZC_SHIFT 7 /* SPKZC */
+#define WM8990_SPKVOL_MASK 0x007F /* SPKVOL - [6:0] */
+#define WM8990_SPKVOL_SHIFT 0 /* SPKVOL - [6:0] */
+
/*
* R39 (0x27) - Input Mixer1
*/
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <sound/core.h>
projects / linux-2.6-omap-h63xx.git / commitdiff