nomce [IA-32] Machine Check Exception
+ nomca [IA-64] Disable machine check abort handling
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
+
+
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
error = -EINVAL;
goto out;
}
-
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
error = -EFAULT;
goto out;
}
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
}
}
/* now check if any cpu has matched */
- for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ allocated_flag = 0;
+ sum = 0;
+ for_each_online_cpu(cpu_num) {
if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (!allocated_flag) {
}
out_free:
- for (i = 0; i < num_online_cpus(); i++) {
+ for_each_online_cpu(i) {
if (ucode_cpu_info[i].mc) {
int j;
void *tmp = ucode_cpu_info[i].mc;
vfree(tmp);
- for (j = i; j < num_online_cpus(); j++) {
+ for_each_online_cpu(j) {
if (ucode_cpu_info[j].mc == tmp)
ucode_cpu_info[j].mc = NULL;
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:15:43 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_ITANIUM is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
# CONFIG_PERFMON is not set
CONFIG_IA64_PALINFO=m
# Firmware Drivers
#
CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
#
# Generic Driver Options
#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
#
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
-# Networking options
+# PHY device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
#
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
#
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
#
-# CONFIG_NET_SCHED is not set
#
-# Network testing
+# Ethernet (10000 Mbit)
#
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
#
# ISDN subsystem
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
#
# Input Device Drivers
#
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
#
# USB support
#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
CONFIG_HP_SIMSCSI=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_AGP_SGI_TIOCA=y
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
CONFIG_SGI_IOC4=y
CONFIG_SGI_IOC3=y
+#
+# EDAC - error detection and reporting (RAS)
+#
+
#
# File systems
#
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
+#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
#
# Dallas's 1-wire bus
#
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
#
CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
#
# File systems
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
- #define __NR_syscall_last 1255
- .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
- .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
+ // fill in zeros for the remaining entries
+ .zero:
+ .space fsyscall_table + 8*NR_syscalls - .zero, 0
// 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
ENTRY(unaligned_access)
DBG_FAULT(30)
- mov r16=cr.ipsr
mov r31=pr // prepare to save predicates
;;
br.sptk.many dispatch_unaligned_handler
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
#undef DEBUG_UNALIGNED_TRAP
#define IA64_FIRST_ROTATING_FR 32
#define SIGN_EXT9 0xffffffffffffff00ul
+/*
+ * sysctl settable hook which tells the kernel whether to honor the
+ * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want
+ * to allow the super user to enable/disable this for security reasons
+ * (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
/*
* For M-unit:
*
if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
goto force_sigbus;
- if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
- && within_logging_rate_limit())
+ if (!no_unaligned_warning &&
+ !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+ within_logging_rate_limit())
{
char buf[200]; /* comm[] is at most 16 bytes... */
size_t len;
if (user_mode(regs))
tty_write_message(current->signal->tty, buf);
buf[len-1] = '\0'; /* drop '\r' */
- printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */
+ /* watch for command names containing %s */
+ printk(KERN_WARNING "%s", buf);
+ } else {
+ if (no_unaligned_warning && !noprint_warning) {
+ noprint_warning = 1;
+ printk(KERN_WARNING "%s(%d) encountered an "
+ "unaligned exception which required\n"
+ "kernel assistance, which degrades "
+ "the performance of the application.\n"
+ "Unaligned exception warnings have "
+ "been disabled by the system "
+ "administrator\n"
+ "echo 0 > /proc/sys/kernel/ignore-"
+ "unaligned-usertrap to re-enable\n",
+ current->comm, current->pid);
+ }
}
} else {
if (within_logging_rate_limit())
char * __init
pcibios_setup (char *str)
{
- return NULL;
+ return str;
}
int
EXPORT_SYMBOL(sn_pci_controller_fixup);
EXPORT_SYMBOL(sn_bus_store_sysdata);
EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);
return error;
}
-struct dirent32 {
- unsigned int d_ino;
- unsigned int d_off;
- unsigned short d_reclen;
- char d_name[NAME_MAX + 1];
-};
-
-static void
-xlate_dirent(void *dirent64, void *dirent32, long n)
-{
- long off;
- struct dirent *dirp;
- struct dirent32 *dirp32;
-
- off = 0;
- while (off < n) {
- dirp = (struct dirent *)(dirent64 + off);
- dirp32 = (struct dirent32 *)(dirent32 + off);
- off += dirp->d_reclen;
- dirp32->d_ino = dirp->d_ino;
- dirp32->d_off = (unsigned int)dirp->d_off;
- dirp32->d_reclen = dirp->d_reclen;
- strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2));
- }
- return;
-}
-
-asmlinkage long
-sys32_getdents(unsigned int fd, void * dirent32, unsigned int count)
-{
- long n;
- void *dirent64;
-
- dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1));
- if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0)
- return(n);
- xlate_dirent(dirent64, dirent32, n);
- return(n);
-}
-
-asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count);
-
-asmlinkage int
-sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
-{
- int n;
- struct dirent dirent64;
-
- if ((n = old_readdir(fd, &dirent64, count)) < 0)
- return(n);
- xlate_dirent(&dirent64, dirent32, dirent64.d_reclen);
- return(n);
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
PTR sys_fdatasync
PTR sys_truncate
PTR sys_ftruncate /* 6075 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR sys_getcwd
PTR sys_chdir
PTR sys_fchdir
PTR sys_uselib
PTR sys_swapon
PTR sys_reboot
- PTR sys32_readdir
+ PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_msync
sparse_init();
paging_init();
resource_init();
+#ifdef CONFIG_SMP
+ plat_smp_setup();
+#endif
}
int __init fpu_disable(char *s)
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
- prom_prepare_cpus(max_cpus);
+ plat_prepare_cpus(max_cpus);
}
/* preload SMP state for boot cpu */
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
-void prom_prepare_cpus(unsigned int max_cpus)
+void plat_smp_setup(void)
{
unsigned long val;
int i, num;
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- if (i < max_cpus) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
- return ioremap_cacheable_cow(start, len);
+ return ioremap_cachable(start, len);
return ioremap_nocache(start, len);
}
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
r4k_blast_scache_page = blast_scache32_page;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
r4k_blast_scache = blast_scache32;
protected_blast_dcache_range(start, end);
}
- if (!cpu_icache_snoops_remote_store) {
+ if (!cpu_icache_snoops_remote_store && scache_size) {
if (end - start > scache_size)
r4k_blast_scache();
else
R4600_HIT_CACHEOP_WAR_IMPL;
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store)
+ if (!cpu_icache_snoops_remote_store && scache_size)
protected_writeback_scache_line(addr & ~(sc_lsize - 1));
protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (MIPS4K_ICACHE_REFILL_WAR) {
* We don't want to start the secondary CPU yet nor do we have a nice probing
* feature in PMON so we just assume presence of the secondary core.
*/
-static char maxcpus_string[] __initdata =
- KERN_WARNING "max_cpus set to 0; using 1 instead\n";
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
- int enabled = 0, i;
-
- if (max_cpus == 0) {
- printk(maxcpus_string);
- max_cpus = 1;
- }
+ int i;
cpus_clear(phys_cpu_present_map);
for (i = 0; i < 2; i++) {
- if (i == max_cpus)
- break;
-
- /*
- * The boot CPU
- */
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
- enabled++;
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
/*
* Be paranoid. Enable the IPI only if we're really about to go SMP.
*/
- if (enabled > 1)
+ if (cpus_weight(cpu_possible_map))
set_c0_status(STATUSF_IP5);
}
REMOTE_HUB_CLR_INTR(nasid, i);
}
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
cnodeid_t cnode;
alloc_cpupda(0, 0);
}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+ /* We already did everything necessary earlier */
+}
+
/*
* Launch a slave into smp_bootstrap(). It doesn't take an argument, and we
* set sp to the kernel stack of the newly created idle process, gp to the proc
*
* Common setup before any secondaries are started
*/
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
int i, num;
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
- for (i=1, num=0; i<NR_CPUS; i++) {
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
- printk("Detected %i available secondary CPU(s)\n", num);
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
}
/*
unsigned long offset = address - vma->vm_start;
struct page *pg;
#ifdef CONFIG_PPC64
- void *vbase = test_thread_flag(TIF_32BIT) ?
- vdso32_kbase : vdso64_kbase;
+ void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+ vdso64_kbase : vdso32_kbase;
#else
void *vbase = vdso32_kbase;
#endif
.cfi_startproc
/* check for update count & load values */
1: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r4,1 /* pending update ? loop */
+ andi. r0,r8,1 /* pending update ? loop */
bne- 1b
- xor r0,r4,r4 /* create dependency */
+ xor r0,r8,r8 /* create dependency */
add r3,r3,r0
/* Get TB & offset it */
#ifdef CONFIG_PPC_ISERIES
if (_machine == PLATFORM_ISERIES_LPAR)
ret = iSeries_hpte_insert(hpteg, va,
- virt_to_abs(paddr),
+ __pa(vaddr),
tmp_mode,
HPTE_V_BOLTED,
psize);
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
static inline const char * pcid_name (struct pci_dev *pdev)
{
- if (pdev->dev.driver)
+ if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
return "";
}
}
}
}
+
+ eeh_add_device_tree_late(bus);
}
EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
{
u8 sec_busno;
struct pci_bus *child_bus;
- struct pci_dev *child_dev;
/* Get busno of downstream bus */
pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
pci_scan_child_bus(child_bus);
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
/* Fixup new pci devices without touching bus struct */
pcibios_fixup_new_pci_devices(child_bus, 0);
eeh_add_device_tree_early(dn);
- /* pci_scan_slot should find all children */
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- pcibios_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
+ if (_machine == PLATFORM_PSERIES_LPAR) {
+ /* use ofdt-based probe */
+ of_scan_bus(dn, bus);
+ if (!list_empty(&bus->devices)) {
+ pcibios_fixup_new_pci_devices(bus, 0);
+ pci_bus_add_devices(bus);
+ }
+ } else {
+ /* use legacy probe */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (num) {
+ pcibios_fixup_new_pci_devices(bus, 1);
+ pci_bus_add_devices(bus);
+ }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late (dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pcibios_pci_config_bridge(dev);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pcibios_pci_config_bridge(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
irq_exit();
}
-int __initdata unsync_tsc_on_multicluster;
-
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Some clustered boxes may have unsynced TSC problems if they are
+ * Clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /* Only do this check on IBM machines - big Unisys systems
- use multiple clusters too, but have synchronized TSC */
- if (!unsync_tsc_on_multicluster)
- return 0;
-
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
CFQ_CFQQ_FLAG_fifo_expire,
CFQ_CFQQ_FLAG_idle_window,
CFQ_CFQQ_FLAG_prio_changed,
- CFQ_CFQQ_FLAG_expired,
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(fifo_expire);
CFQ_CFQQ_FNS(idle_window);
CFQ_CFQQ_FNS(prio_changed);
-CFQ_CFQQ_FNS(expired);
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfqd->busy_queues)
+ if (cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
cfqq->slice_left = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
- cfq_clear_cfqq_expired(cfqq);
}
cfqd->active_queue = cfqq;
}
+/*
+ * current cfqq expired its slice (or was too idle), select new one
+ */
+static void
+__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int preempted)
+{
+ unsigned long now = jiffies;
+
+ if (cfq_cfqq_wait_request(cfqq))
+ del_timer(&cfqd->idle_slice_timer);
+
+ if (!preempted && !cfq_cfqq_dispatched(cfqq)) {
+ cfqq->service_last = now;
+ cfq_schedule_dispatch(cfqd);
+ }
+
+ cfq_clear_cfqq_must_dispatch(cfqq);
+ cfq_clear_cfqq_wait_request(cfqq);
+
+ /*
+ * store what was left of this slice, if the queue idled out
+ * or was preempted
+ */
+ if (time_after(cfqq->slice_end, now))
+ cfqq->slice_left = cfqq->slice_end - now;
+ else
+ cfqq->slice_left = 0;
+
+ if (cfq_cfqq_on_rr(cfqq))
+ cfq_resort_rr_list(cfqq, preempted);
+
+ if (cfqq == cfqd->active_queue)
+ cfqd->active_queue = NULL;
+
+ if (cfqd->active_cic) {
+ put_io_context(cfqd->active_cic->ioc);
+ cfqd->active_cic = NULL;
+ }
+
+ cfqd->dispatch_slice = 0;
+}
+
+static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
+{
+ struct cfq_queue *cfqq = cfqd->active_queue;
+
+ if (cfqq)
+ __cfq_slice_expired(cfqd, cfqq, preempted);
+}
+
/*
* 0
* 0,1
static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
-
- /*
- * if current queue is expired but not done with its requests yet,
- * wait for that to happen
- */
- if ((cfqq = cfqd->active_queue) != NULL) {
- if (cfq_cfqq_expired(cfqq) && cfq_cfqq_dispatched(cfqq))
- return NULL;
- }
+ struct cfq_queue *cfqq = NULL;
/*
* if current list is non-empty, grab first entry. if it is empty,
return cfqq;
}
-/*
- * current cfqq expired its slice (or was too idle), select new one
- */
-static void
-__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int preempted)
-{
- unsigned long now = jiffies;
-
- if (cfq_cfqq_wait_request(cfqq))
- del_timer(&cfqd->idle_slice_timer);
-
- if (!preempted && !cfq_cfqq_dispatched(cfqq))
- cfqq->service_last = now;
-
- cfq_clear_cfqq_must_dispatch(cfqq);
- cfq_clear_cfqq_wait_request(cfqq);
-
- /*
- * store what was left of this slice, if the queue idled out
- * or was preempted
- */
- if (time_after(cfqq->slice_end, now))
- cfqq->slice_left = cfqq->slice_end - now;
- else
- cfqq->slice_left = 0;
-
- if (cfq_cfqq_on_rr(cfqq))
- cfq_resort_rr_list(cfqq, preempted);
-
- if (cfqq == cfqd->active_queue)
- cfqd->active_queue = NULL;
-
- if (cfqd->active_cic) {
- put_io_context(cfqd->active_cic->ioc);
- cfqd->active_cic = NULL;
- }
-
- cfqd->dispatch_slice = 0;
-}
-
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
-{
- struct cfq_queue *cfqq = cfqd->active_queue;
-
- if (cfqq) {
- /*
- * use deferred expiry, if there are requests in progress as
- * not to disturb the slice of the next queue
- */
- if (cfq_cfqq_dispatched(cfqq))
- cfq_mark_cfqq_expired(cfqq);
- else
- __cfq_slice_expired(cfqd, cfqq, preempted);
- }
-}
-
static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ unsigned long sl;
+
WARN_ON(!RB_EMPTY(&cfqq->sort_list));
WARN_ON(cfqq != cfqd->active_queue);
cfq_mark_cfqq_must_dispatch(cfqq);
cfq_mark_cfqq_wait_request(cfqq);
- if (!timer_pending(&cfqd->idle_slice_timer)) {
- unsigned long slice_left = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
-
- cfqd->idle_slice_timer.expires = jiffies + slice_left;
- add_timer(&cfqd->idle_slice_timer);
- }
-
+ sl = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
+ mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
return 1;
}
if (!cfqq)
goto new_queue;
- if (cfq_cfqq_expired(cfqq))
- goto new_queue;
-
/*
* slice has expired
*/
BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
BUG_ON(cfq_cfqq_on_rr(cfqq));
- if (unlikely(cfqd->active_queue == cfqq)) {
+ if (unlikely(cfqd->active_queue == cfqq))
__cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_cfqd(cfqq->cfqd);
spin_lock(q->queue_lock);
- if (unlikely(cic->cfqq == cfqd->active_queue)) {
+ if (unlikely(cic->cfqq == cfqd->active_queue))
__cfq_slice_expired(cfqd, cic->cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_queue(cic->cfqq);
cic->cfqq = NULL;
cfqq->service_last = now;
cfq_resort_rr_list(cfqq, 0);
}
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
+ cfq_schedule_dispatch(cfqd);
}
if (cfq_crq_is_sync(crq))
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ /* Don't copy past the end of the hardware receive buffer */
+ if (rx_op + c > 0x100) c = 0x100 - rx_op;
+
+ sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
-
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
int tx_active;
unsigned char signals; /* serial signal states */
- unsigned int init_error; /* initialization error */
+ int init_error; /* initialization error */
unsigned char *tx_buf;
int tx_count;
t->commit = 0;
t->read = 0;
/* DEBUG ONLY */
- memset(t->data, '*', size);
+/* memset(t->data, '*', size); */
/* printk("Flip recycle %p\n", t); */
return t;
}
if (i == ISO_CHANNELS) {
PRINT(KERN_ERR, ohci->host->id,
"No free channel found");
- return EAGAIN;
+ return -EAGAIN;
}
if (!(ohci->ISO_channel_usage & mask)) {
v.channel = i;
i = numslots;
break;
}
- if (!memcmp(buf[i].name, "FIS directory", 14))
+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
+ /* This is apparently the FIS directory entry for the
+ * FIS directory itself. The FIS directory size is
+ * one erase block, if the buf[i].size field is
+ * swab32(erasesize) then we know we are looking at
+ * a byte swapped FIS directory - swap all the entries!
+ * (NOTE: this is 'size' not 'data_length', size is
+ * the full size of the entry.)
+ */
+ if (swab32(buf[i].size) == master->erasesize) {
+ int j;
+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+ /* The unsigned long fields were written with the
+ * wrong byte sex, name and pad have no byte sex.
+ */
+# define do_swab32(x) (x) = swab32(x)
+ do_swab32(buf[j].flash_base);
+ do_swab32(buf[j].mem_base);
+ do_swab32(buf[j].size);
+ do_swab32(buf[j].entry_point);
+ do_swab32(buf[j].data_length);
+ do_swab32(buf[j].desc_cksum);
+ do_swab32(buf[j].file_cksum);
+# undef do_swab32
+ }
+ }
break;
+ }
}
if (i == numslots) {
/* Didn't find it */
return -ENOMEM;
}
+static void cp_init_rings_index (struct cp_private *cp)
+{
+ cp->rx_tail = 0;
+ cp->tx_head = cp->tx_tail = 0;
+}
+
static int cp_init_rings (struct cp_private *cp)
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
- cp->rx_tail = 0;
- cp->tx_head = cp->tx_tail = 0;
+ cp_init_rings_index(cp);
return cp_refill_rx (cp);
}
spin_unlock_irqrestore (&cp->lock, flags);
- if (cp->pdev && cp->wol_enabled) {
- pci_save_state (cp->pdev);
- cp_set_d3_state (cp);
- }
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int cp_resume (struct pci_dev *pdev)
{
- struct net_device *dev;
- struct cp_private *cp;
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
- dev = pci_get_drvdata (pdev);
- cp = netdev_priv(dev);
+ if (!netif_running(dev))
+ return 0;
netif_device_attach (dev);
-
- if (cp->pdev && cp->wol_enabled) {
- pci_set_power_state (cp->pdev, PCI_D0);
- pci_restore_state (cp->pdev);
- }
-
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ /* FIXME: sh*t may happen if the Rx ring buffer is depleted */
+ cp_init_rings_index (cp);
cp_init_hw (cp);
netif_start_queue (dev);
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
-module_param(disable_msi, int, 0);
-MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
-/* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- struct sky2_hw *hw = dev_id;
- u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
-
- if (status == 0)
- return IRQ_NONE;
-
- if (status & Y2_IS_IRQ_SW) {
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- hw->msi = 1;
- }
- sky2_write32(hw, B0_Y2_SP_ICR, 2);
-
- sky2_read32(hw, B0_IMSK);
- return IRQ_HANDLED;
-}
-
-/* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
-{
- struct pci_dev *pdev = hw->pdev;
- int i, err;
-
- sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
-
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
- if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
- return err;
- }
-
- sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
- wmb();
-
- for (i = 0; i < 10; i++) {
- barrier();
- if (hw->msi)
- goto found;
- mdelay(1);
- }
-
- err = -EOPNOTSUPP;
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- found:
- sky2_write32(hw, B0_IMSK, 0);
-
- free_irq(pdev->irq, hw);
-
- return err;
-}
-
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
}
}
- if (!disable_msi && pci_enable_msi(pdev) == 0) {
- err = sky2_test_msi(hw);
- if (err == -EOPNOTSUPP) {
- /* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- pci_name(pdev));
- pci_disable_msi(pdev);
- }
- else if (err)
- goto err_out_unregister;
- }
-
err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
DRV_NAME, hw);
if (err) {
return 0;
err_out_unregister:
- if (hw->msi)
- pci_disable_msi(pdev);
if (dev1) {
unregister_netdev(dev1);
free_netdev(dev1);
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- if (hw->msi)
- pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
u32 intr_mask;
int pm_cap;
- int msi;
u8 chip_id;
u8 chip_rev;
u8 copper;
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
+
+ /* TG3 chips onboard the SunBlade-2500 don't have the
+ * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+ * are distinguishable from non-Sun variants by being
+ * named "network" by the firmware. Non-Sun cards will
+ * show up as being named "ethernet".
+ */
+ if (!strcmp(pcp->prom_name, "network"))
+ return 1;
}
return 0;
}
for (i = 0; i < vptr->options.numrx; i++) {
struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
+ struct rx_desc *rd = vptr->rd_ring + i;
+
+ memset(rd, 0, sizeof(*rd));
if (!rd_info->skb)
continue;
down_write(&dev->dev.bus->subsys.rwsem);
dev->card_link = clink;
dev->dev.driver = &drv->link.driver;
- if (drv->link.driver.probe) {
- if (drv->link.driver.probe(&dev->dev)) {
- dev->dev.driver = NULL;
- dev->card_link = NULL;
- up_write(&dev->dev.bus->subsys.rwsem);
- return NULL;
- }
+ if (pnp_bus_type.probe(&dev->dev)) {
+ dev->dev.driver = NULL;
+ dev->card_link = NULL;
+ up_write(&dev->dev.bus->subsys.rwsem);
+ return NULL;
}
device_bind_driver(&dev->dev);
up_write(&dev->dev.bus->subsys.rwsem);
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int libata_fua = 0;
+module_param_named(fua, libata_fua, int, 0444);
+MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
{
unsigned char model[41], fw[9];
+ if (!libata_fua)
+ return 0;
if (!ata_id_has_fua(id))
return 0;
/* libata-core.c */
extern int atapi_enabled;
+extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
static void sunsu_stop_rx(struct uart_port *port)
{
struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
- unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&up->port.lock, flags);
}
static void sunsu_enable_ms(struct uart_port *port)
#
menu "SN Devices"
+ depends on SGI_SN
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+ depends on MMTIMER
default m
---help---
This option enables basic support for the SGI IOC4-based Base IO
config SGI_IOC3
tristate "SGI IOC3 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2)
default m
---help---
This option enables basic support for the SGI IOC3-based Base IO
return presence;
}
-static inline int nic_read_bit(struct ioc3_driver_data *idd)
+static int nic_read_bit(struct ioc3_driver_data *idd)
{
int result;
unsigned long flags;
return result;
}
-static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
+static void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
writel(mcr_pack(6, 110), &idd->vma->mcr);
/* Interrupts */
-static inline void
-write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
+static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
{
unsigned long flags;
}
/* Add this IOC3 to all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(ioc3_submodules[id] && ioc3_submodules[id]->probe) {
idd->active[id] = 1;
idd->active[id] = !ioc3_submodules[id]->probe
(ioc3_submodules[id], idd);
}
- read_unlock(&ioc3_submodules_lock);
printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev));
idd = pci_get_drvdata(pdev);
/* Remove this IOC3 from all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(idd->active[id]) {
if(ioc3_submodules[id] && ioc3_submodules[id]->remove)
pci_name(pdev));
idd->active[id] = 0;
}
- read_unlock(&ioc3_submodules_lock);
/* Clear and disable all IRQs */
write_ireg(idd, ~0, IOC3_W_IEC);
ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
/* Reset halt state (does flush) */
lh7a40x_set_halt(_ep, 0);
- spin_unlock_irqrestore(&ep->dev->lock, flags);
-
DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
return 0;
}
break;
qep = &dev->ep[ep_num];
+ spin_unlock(&dev->lock);
if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
DEBUG_SETUP("SET_FEATURE (%d)\n",
ep_num);
ep_num);
lh7a40x_set_halt(&qep->ep, 0);
}
+ spin_lock(&dev->lock);
usb_set_index(0);
/* Reply with a ZLP on next IN token */
// DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
- /*
- * we need more memory:
- * oid_supported_list is the largest answer
+ /*
+ * we need more memory:
+ * gen_ndis_query_resp expects enough space for
+ * rndis_query_cmplt_type followed by data.
+ * oid_supported_list is the largest data reply
*/
- r = rndis_add_response (configNr, sizeof (oid_supported_list));
+ r = rndis_add_response (configNr,
+ sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type));
if (!r)
return -ENOMEM;
resp = (rndis_query_cmplt_type *) r->buf;
offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
#endif
- }
- /* always say Linux will own the hardware
- * by setting EHCI_USBLEGSUP_OS.
- */
- pci_write_config_byte(pdev, offset + 3, 1);
+ /* some systems get upset if this semaphore is
+ * set for any other reason than forcing a BIOS
+ * handoff..
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+ }
/* if boot firmware now owns EHCI, spin till
* it hands it over.
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
#define USB_VENDOR_ID_CODEMERCS 0x07c0
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
/*
* microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
*/
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
/*
* Active Robots product ids.
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
#define PALM_ZIRE_ID 0x0070
#define PALM_M100_ID 0x0080
+#define GSPDA_VENDOR_ID 0x115e
+#define GSPDA_XPLORE_M68_ID 0xf100
+
#define SONY_VENDOR_ID 0x054C
#define SONY_CLIE_3_5_ID 0x0038
#define SONY_CLIE_4_0_ID 0x0066
"Flashgate",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
+ "Thomson Multimedia Inc.",
+ "RCA RD1080 MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
current->flags &= ~PF_RANDOMIZE;
flush_thread();
+ /* Set the new mm task size. We have to do that late because it may
+ * depend on TIF_32BIT which is only updated in flush_thread() on
+ * some architectures like powerpc
+ */
+ current->mm->task_size = TASK_SIZE;
+
if (bprm->e_uid != current->euid || bprm->e_gid != current->egid ||
file_permission(bprm->file, MAY_READ) ||
(bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP)) {
/* Doesn't hurt to "reset" the validity timeout */
fuse_invalidate_entry_cache(entry);
+
+ /* For negative dentries, always do a fresh lookup */
if (!inode)
return 0;
fuse_lookup_init(req, entry->d_parent->d_inode, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
+ /* Zero nodeid is same as -ENOENT */
+ if (!err && !outarg.nodeid)
+ err = -ENOENT;
if (!err) {
struct fuse_inode *fi = get_fuse_inode(inode);
if (outarg.nodeid != get_node_id(inode)) {
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && ((outarg.nodeid && invalid_nodeid(outarg.nodeid)) ||
- !valid_mode(outarg.attr.mode)))
+ /* Zero nodeid is same as -ENOENT, but with valid timeout */
+ if (!err && outarg.nodeid &&
+ (invalid_nodeid(outarg.nodeid) || !valid_mode(outarg.attr.mode)))
err = -EIO;
if (!err && outarg.nodeid) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
/* First sum forwards in this page */
do {
- if (mapped != buffer_mapped(bh))
+ if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
return total;
total += bh->b_size;
} while ((bh = bh->b_this_page) != head);
kmem_zone_t *qm_dqtrxzone;
STATIC kmem_shaker_t xfs_qm_shaker;
+STATIC cred_t xfs_zerocr;
+STATIC xfs_inode_t xfs_zeroino;
+
STATIC void xfs_qm_list_init(xfs_dqlist_t *, char *, int);
STATIC void xfs_qm_list_destroy(xfs_dqlist_t *);
xfs_trans_t *tp;
int error;
unsigned long s;
- cred_t zerocr;
- xfs_inode_t zeroino;
int committed;
tp = xfs_trans_alloc(mp, XFS_TRANS_QM_QINOCREATE);
xfs_trans_cancel(tp, 0);
return error;
}
- memset(&zerocr, 0, sizeof(zerocr));
- memset(&zeroino, 0, sizeof(zeroino));
- if ((error = xfs_dir_ialloc(&tp, &zeroino, S_IFREG, 1, 0,
- &zerocr, 0, 1, ip, &committed))) {
+ if ((error = xfs_dir_ialloc(&tp, &xfs_zeroino, S_IFREG, 1, 0,
+ &xfs_zerocr, 0, 1, ip, &committed))) {
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
XFS_TRANS_ABORT);
return error;
/*
* Lock the inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
XFS_BMAP_INIT(&flist, &firstblock);
/*
/*
* Lock the bitmap inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL,
- &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
/*
* Get a buffer for the block.
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- if ((error = xfs_trans_iget(mp, tp, 0, mp->m_sb.sb_rbmino,
- XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rbmip);
/*
/*
* Get the summary inode into the transaction.
*/
- if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino,
- 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rsumip);
/*
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
sumbp = NULL;
/*
* Allocate by size, or near another block, or exactly at some block.
/*
* Synchronize by locking the bitmap inode.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
#if defined(__KERNEL__) && defined(DEBUG)
/*
* Check to see that this whole range is currently allocated.
__uint64_t seq; /* sequence number of file creation */
__uint64_t *seqp; /* pointer to seqno in inode */
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error)
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
ASSERT(ip == mp->m_rbmip);
seqp = (__uint64_t *)&ip->i_d.di_atime;
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
-#define MAX_COMPACT_NODES 512
+#define MAX_TIO_NODES MAX_NUMNODES
+#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
/*
* Maximum number of nodes in all partitions and in all coherency domains.
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
#define ioremap_nocache(offset, size) \
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
+/*
+ * ioremap_cachable - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU. Also enables full write-combining. Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size) \
+ __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT)
+
/*
* These two are MIPS specific ioremap variant. ioremap_cacheable_cow
* requests a cachable mapping, ioremap_uncached_accelerated requests a
return cpus_weight(cpu_callout_map);
}
-/* These are defined by the board-specific code. */
+/*
+ * These are defined by the board-specific code.
+ */
/*
* Cause the function described by call_data to be executed on the passed
extern void prom_init_secondary(void);
/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ * Populate cpu_possible_map before smp_init, called from setup_arch.
+ */
+extern void plat_smp_setup(void);
+
+/*
+ * Called after init_IRQ but before __cpu_up.
*/
extern void prom_prepare_cpus(unsigned int max_cpus);
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
#include <linux/string.h>
struct pci_dev;
+struct pci_bus;
struct device_node;
#ifdef CONFIG_EEH
*/
void eeh_add_device_early(struct device_node *);
void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *);
+void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device - undo EEH setup for the indicated pci device
static inline void eeh_add_device_early(struct device_node *dn) { }
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
static inline void eeh_remove_device(struct pci_dev *dev) { }
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
extern int acpi_skip_timer_override;
-extern int unsync_tsc_on_multicluster;
-
-static inline int acpi_madt_oem_check(char *oem, char *productid)
-{
- /* Copied from i386. Probably has too many entries. */
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))) {
- unsync_tsc_on_multicluster = 1;
- }
- return 0;
-}
-
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
#define EBT_LOG_ARP 0x02
+#define EBT_LOG_NFLOG 0x04
#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
#define EBT_LOG_PREFIX_SIZE 30
#define EBT_LOG_WATCHER "log"
#define IPT_LOG_TCPOPT 0x02 /* Log TCP options */
#define IPT_LOG_IPOPT 0x04 /* Log IP options */
#define IPT_LOG_UID 0x08 /* Log UID owning local socket */
-#define IPT_LOG_MASK 0x0f
+#define IPT_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IPT_LOG_MASK 0x1f
struct ipt_log_info {
unsigned char level;
#define IP6T_LOG_TCPOPT 0x02 /* Log TCP options */
#define IP6T_LOG_IPOPT 0x04 /* Log IP options */
#define IP6T_LOG_UID 0x08 /* Log UID owning local socket */
-#define IP6T_LOG_MASK 0x0f
+#define IP6T_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IP6T_LOG_MASK 0x1f
struct ip6t_log_info {
unsigned char level;
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
- unsigned long mmap_base; /* base of mmap area */
- unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
+ unsigned long mmap_base; /* base of mmap area */
+ unsigned long task_size; /* size of task vm space */
+ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */
pgd_t * pgd;
atomic_t mm_users; /* How many users with user space? */
KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+ KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
};
int (*init_state)(struct xfrm_state *x);
void (*destructor)(struct xfrm_state *);
int (*input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
- int (*post_input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
int (*output)(struct xfrm_state *, struct sk_buff *pskb);
/* Estimate maximal size of result of transformation of a dgram */
u32 (*get_max_size)(struct xfrm_state *, int size);
extern int acct_parm[];
#endif
+#ifdef CONFIG_IA64
+extern int no_unaligned_warning;
+#endif
+
static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
ctl_table *, void **);
static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
.mode = 0644,
.proc_handler = &proc_dointvec,
},
+#endif
+#ifdef CONFIG_IA64
+ {
+ .ctl_name = KERN_IA64_UNALIGNED,
+ .procname = "ignore-unaligned-usertrap",
+ .data = &no_unaligned_warning,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#endif
{ .ctl_name = 0 }
};
goto out;
}
- err = do_migrate_pages(mm, &old, &new, MPOL_MF_MOVE);
+ err = do_migrate_pages(mm, &old, &new,
+ capable(CAP_SYS_ADMIN) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE);
out:
mmput(mm);
return err;
struct vm_operations_struct generic_file_vm_ops = {
};
-EXPORT_SYMBOL(vmalloc);
EXPORT_SYMBOL(vfree);
EXPORT_SYMBOL(vmalloc_to_page);
EXPORT_SYMBOL(vmalloc_32);
{
return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
}
+EXPORT_SYMBOL(vmalloc);
+
+void *vmalloc_node(unsigned long size, int node)
+{
+ return vmalloc(size);
+}
+EXPORT_SYMBOL(vmalloc_node);
/*
* vmalloc_32 - allocate virtually continguos memory (32bit addressable)
{
struct mm_struct *mm = NULL;
task_t *p;
- unsigned long points;
+ unsigned long points = 0;
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
* through real pte's pointing to valid pages and then releasing
* the page from the swap cache.
*
- * Must hold page lock on page.
+ * Must hold page lock on page and mmap_sem of one vma that contains
+ * the page.
*/
void remove_from_swap(struct page *page)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
+ unsigned long mapping;
- if (!PageAnon(page) || !PageSwapCache(page))
+ if (!PageSwapCache(page))
return;
- anon_vma = page_lock_anon_vma(page);
- if (!anon_vma)
+ mapping = (unsigned long)page->mapping;
+
+ if (!mapping || (mapping & PAGE_MAPPING_ANON) == 0)
return;
+ /*
+ * We hold the mmap_sem lock. So no need to call page_lock_anon_vma.
+ */
+ anon_vma = (struct anon_vma *) (mapping - PAGE_MAPPING_ANON);
+ spin_lock(&anon_vma->lock);
+
list_for_each_entry(vma, &anon_vma->head, anon_vma_node)
remove_vma_swap(vma, page);
spin_unlock(&anon_vma->lock);
-
delete_from_swap_cache(page);
}
EXPORT_SYMBOL(remove_from_swap);
li.u.log.level = info->loglevel;
li.u.log.logflags = info->bitmask;
- nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li, info->prefix);
+ if (info->bitmask & EBT_LOG_NFLOG)
+ nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
+ else
+ ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
}
static struct ebt_watcher log =
get_random_bytes(&lopt->hash_rnd, sizeof(lopt->hash_rnd));
rwlock_init(&queue->syn_wait_lock);
queue->rskq_accept_head = queue->rskq_accept_head = NULL;
- queue->rskq_defer_accept = 0;
lopt->nr_table_entries = nr_table_entries;
write_lock_bh(&queue->syn_wait_lock);
/* dst->last_associate is not overwritten */
}
-static inline int is_beacon(int fc)
+static inline int is_beacon(__le16 fc)
{
return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
}
escape_essid(info_element->data,
info_element->len),
MAC_ARG(beacon->header.addr3),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
return;
}
escape_essid(network.ssid,
network.ssid_len),
MAC_ARG(network.bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
update_network(target, &network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
- if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->handle_beacon != NULL)
ieee->handle_beacon(dev, beacon, &network);
} else {
#include <net/protocol.h>
#include <net/udp.h>
-/* decapsulation data for use when post-processing */
-struct esp_decap_data {
- xfrm_address_t saddr;
- __u16 sport;
- __u8 proto;
-};
-
static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
int elen = skb->len - sizeof(struct ip_esp_hdr) - esp->conf.ivlen - alen;
int nfrags;
int encap_len = 0;
+ u8 nexthdr[2];
+ struct scatterlist *sg;
+ u8 workbuf[60];
+ int padlen;
if (!pskb_may_pull(skb, sizeof(struct ip_esp_hdr)))
goto out;
if (esp->conf.ivlen)
crypto_cipher_set_iv(esp->conf.tfm, esph->enc_data, crypto_tfm_alg_ivsize(esp->conf.tfm));
- {
- u8 nexthdr[2];
- struct scatterlist *sg = &esp->sgbuf[0];
- u8 workbuf[60];
- int padlen;
-
- if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
- sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
- if (!sg)
- goto out;
- }
- skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
- crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
- if (unlikely(sg != &esp->sgbuf[0]))
- kfree(sg);
-
- if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
- BUG();
+ sg = &esp->sgbuf[0];
- padlen = nexthdr[0];
- if (padlen+2 >= elen)
+ if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
+ sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
+ if (!sg)
goto out;
-
- /* ... check padding bits here. Silly. :-) */
-
- if (x->encap && decap && decap->decap_type) {
- struct esp_decap_data *encap_data;
- struct udphdr *uh = (struct udphdr *) (iph+1);
-
- encap_data = (struct esp_decap_data *) (decap->decap_data);
- encap_data->proto = 0;
-
- switch (decap->decap_type) {
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- encap_data->proto = AF_INET;
- encap_data->saddr.a4 = iph->saddr;
- encap_data->sport = uh->source;
- encap_len = (void*)esph - (void*)uh;
- break;
-
- default:
- goto out;
- }
- }
-
- iph->protocol = nexthdr[1];
- pskb_trim(skb, skb->len - alen - padlen - 2);
- memcpy(workbuf, skb->nh.raw, iph->ihl*4);
- skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
- skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
- memcpy(skb->nh.raw, workbuf, iph->ihl*4);
- skb->nh.iph->tot_len = htons(skb->len);
}
+ skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
+ crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
+ if (unlikely(sg != &esp->sgbuf[0]))
+ kfree(sg);
- return 0;
+ if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
+ BUG();
-out:
- return -EINVAL;
-}
+ padlen = nexthdr[0];
+ if (padlen+2 >= elen)
+ goto out;
-static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struct sk_buff *skb)
-{
-
- if (x->encap) {
- struct xfrm_encap_tmpl *encap;
- struct esp_decap_data *decap_data;
+ /* ... check padding bits here. Silly. :-) */
- encap = x->encap;
- decap_data = (struct esp_decap_data *)(decap->decap_data);
+ if (x->encap) {
+ struct xfrm_encap_tmpl *encap = x->encap;
+ struct udphdr *uh;
- /* first, make sure that the decap type == the encap type */
if (encap->encap_type != decap->decap_type)
- return -EINVAL;
+ goto out;
- switch (encap->encap_type) {
- default:
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- /*
- * 1) if the NAT-T peer's IP or port changed then
- * advertize the change to the keying daemon.
- * This is an inbound SA, so just compare
- * SRC ports.
- */
- if (decap_data->proto == AF_INET &&
- (decap_data->saddr.a4 != x->props.saddr.a4 ||
- decap_data->sport != encap->encap_sport)) {
- xfrm_address_t ipaddr;
-
- ipaddr.a4 = decap_data->saddr.a4;
- km_new_mapping(x, &ipaddr, decap_data->sport);
-
- /* XXX: perhaps add an extra
- * policy check here, to see
- * if we should allow or
- * reject a packet from a
- * different source
- * address/port.
- */
- }
-
- /*
- * 2) ignore UDP/TCP checksums in case
- * of NAT-T in Transport Mode, or
- * perform other post-processing fixes
- * as per * draft-ietf-ipsec-udp-encaps-06,
- * section 3.1.2
+ uh = (struct udphdr *)(iph + 1);
+ encap_len = (void*)esph - (void*)uh;
+
+ /*
+ * 1) if the NAT-T peer's IP or port changed then
+ * advertize the change to the keying daemon.
+ * This is an inbound SA, so just compare
+ * SRC ports.
+ */
+ if (iph->saddr != x->props.saddr.a4 ||
+ uh->source != encap->encap_sport) {
+ xfrm_address_t ipaddr;
+
+ ipaddr.a4 = iph->saddr;
+ km_new_mapping(x, &ipaddr, uh->source);
+
+ /* XXX: perhaps add an extra
+ * policy check here, to see
+ * if we should allow or
+ * reject a packet from a
+ * different source
+ * address/port.
*/
- if (!x->props.mode)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- break;
}
+
+ /*
+ * 2) ignore UDP/TCP checksums in case
+ * of NAT-T in Transport Mode, or
+ * perform other post-processing fixes
+ * as per draft-ietf-ipsec-udp-encaps-06,
+ * section 3.1.2
+ */
+ if (!x->props.mode)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
+
+ iph->protocol = nexthdr[1];
+ pskb_trim(skb, skb->len - alen - padlen - 2);
+ memcpy(workbuf, skb->nh.raw, iph->ihl*4);
+ skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
+ skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
+ memcpy(skb->nh.raw, workbuf, iph->ihl*4);
+ skb->nh.iph->tot_len = htons(skb->len);
+
return 0;
+
+out:
+ return -EINVAL;
}
static u32 esp4_get_max_size(struct xfrm_state *x, int mtu)
.destructor = esp_destroy,
.get_max_size = esp4_get_max_size,
.input = esp_input,
- .post_input = esp_post_input,
.output = esp_output
};
static int __init esp4_init(void)
{
- struct xfrm_decap_state decap;
-
- if (sizeof(struct esp_decap_data) >
- sizeof(decap.decap_data)) {
- extern void decap_data_too_small(void);
-
- decap_data_too_small();
- }
-
if (xfrm_register_type(&esp_type, AF_INET) < 0) {
printk(KERN_INFO "ip esp init: can't add xfrm type\n");
return -EAGAIN;
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IPT_LOG_NFLOG)
+ nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IPT_CONTINUE;
}
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IP6T_LOG_NFLOG)
+ nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IP6T_CONTINUE;
}
#include <linux/skbuff.h>
#include <linux/netfilter.h>
#include <linux/seq_file.h>
+#include <linux/rcupdate.h>
#include <net/protocol.h>
#include "nf_internals.h"
* for queueing and must reinject all packets it receives, no matter what.
*/
static struct nf_queue_handler *queue_handler[NPROTO];
-static struct nf_queue_rerouter *queue_rerouter;
+static struct nf_queue_rerouter *queue_rerouter[NPROTO];
static DEFINE_RWLOCK(queue_handler_lock);
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memcpy(&queue_rerouter[pf], rer, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], rer);
write_unlock_bh(&queue_handler_lock);
return 0;
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memset(&queue_rerouter[pf], 0, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], NULL);
write_unlock_bh(&queue_handler_lock);
+ synchronize_rcu();
return 0;
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_rerouter);
struct net_device *physindev = NULL;
struct net_device *physoutdev = NULL;
#endif
+ struct nf_queue_rerouter *rerouter;
/* QUEUE == DROP if noone is waiting, to be safe. */
read_lock(&queue_handler_lock);
- if (!queue_handler[pf] || !queue_handler[pf]->outfn) {
+ if (!queue_handler[pf]) {
read_unlock(&queue_handler_lock);
kfree_skb(*skb);
return 1;
}
- info = kmalloc(sizeof(*info)+queue_rerouter[pf].rer_size, GFP_ATOMIC);
+ info = kmalloc(sizeof(*info)+queue_rerouter[pf]->rer_size, GFP_ATOMIC);
if (!info) {
if (net_ratelimit())
printk(KERN_ERR "OOM queueing packet %p\n",
if (physoutdev) dev_hold(physoutdev);
}
#endif
- if (queue_rerouter[pf].save)
- queue_rerouter[pf].save(*skb, info);
+ rerouter = rcu_dereference(queue_rerouter[pf]);
+ if (rerouter)
+ rerouter->save(*skb, info);
status = queue_handler[pf]->outfn(*skb, info, queuenum,
queue_handler[pf]->data);
- if (status >= 0 && queue_rerouter[pf].reroute)
- status = queue_rerouter[pf].reroute(skb, info);
-
read_unlock(&queue_handler_lock);
if (status < 0) {
{
struct list_head *elem = &info->elem->list;
struct list_head *i;
+ struct nf_queue_rerouter *rerouter;
rcu_read_lock();
break;
}
- if (elem == &nf_hooks[info->pf][info->hook]) {
+ if (i == &nf_hooks[info->pf][info->hook]) {
/* The module which sent it to userspace is gone. */
NFDEBUG("%s: module disappeared, dropping packet.\n",
__FUNCTION__);
verdict = NF_ACCEPT;
}
+ if (verdict == NF_ACCEPT) {
+ rerouter = rcu_dereference(queue_rerouter[info->pf]);
+ if (rerouter && rerouter->reroute(&skb, info) < 0)
+ verdict = NF_DROP;
+ }
+
if (verdict == NF_ACCEPT) {
next_hook:
verdict = nf_iterate(&nf_hooks[info->pf][info->hook],
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
-#endif
- queue_rerouter = kmalloc(NPROTO * sizeof(struct nf_queue_rerouter),
- GFP_KERNEL);
- if (!queue_rerouter)
- return -ENOMEM;
-#ifdef CONFIG_PROC_FS
pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde) {
- kfree(queue_rerouter);
+ if (!pde)
return -1;
- }
pde->proc_fops = &nfqueue_file_ops;
#endif
- memset(queue_rerouter, 0, NPROTO * sizeof(struct nf_queue_rerouter));
-
return 0;
}
struct sec_decap_state *xvec = &(skb->sp->x[i]);
if (!xfrm_selector_match(&xvec->xvec->sel, &fl, family))
return 0;
-
- /* If there is a post_input processor, try running it */
- if (xvec->xvec->type->post_input &&
- (xvec->xvec->type->post_input)(xvec->xvec,
- &(xvec->decap),
- skb) != 0)
- return 0;
}
}
projects / linux-2.6-omap-h63xx.git / commitdiff