bool
# All the supported Soc's
-source "sound/soc/at32/Kconfig"
-source "sound/soc/at91/Kconfig"
+source "sound/soc/atmel/Kconfig"
source "sound/soc/au1x/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/s3c24xx/Kconfig"
snd-soc-core-objs := soc-core.o soc-dapm.o
obj-$(CONFIG_SND_SOC) += snd-soc-core.o
-obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/
+obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/
obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/
+++ /dev/null
-config SND_AT32_SOC
- tristate "SoC Audio for the Atmel AT32 System-on-a-Chip"
- depends on AVR32 && SND_SOC
- help
- Say Y or M if you want to add support for codecs attached to
- the AT32 SSC interface. You will also need to
- to select the audio interfaces to support below.
-
-
-config SND_AT32_SOC_SSC
- tristate
-
-
-
-config SND_AT32_SOC_PLAYPAQ
- tristate "SoC Audio support for PlayPaq with WM8510"
- depends on SND_AT32_SOC && BOARD_PLAYPAQ
- select SND_AT32_SOC_SSC
- select SND_SOC_WM8510
- help
- Say Y or M here if you want to add support for SoC audio
- on the LRS PlayPaq.
-
-
-
-config SND_AT32_SOC_PLAYPAQ_SLAVE
- bool "Run CODEC on PlayPaq in slave mode"
- depends on SND_AT32_SOC_PLAYPAQ
- default n
- help
- Say Y if you want to run with the AT32 SSC generating the BCLK
- and FRAME signals on the PlayPaq. Unless you want to play
- with the AT32 as the SSC master, you probably want to say N here,
- as this will give you better sound quality.
+++ /dev/null
-# AT32 Platform Support
-snd-soc-at32-objs := at32-pcm.o
-snd-soc-at32-ssc-objs := at32-ssc.o
-
-obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o
-obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o
-
-# AT32 Machine Support
-snd-soc-playpaq-objs := playpaq_wm8510.o
-
-obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
+++ /dev/null
-/* sound/soc/at32/at32-pcm.h
- * ASoC PCM interface for Atmel AT32 SoC
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SOUND_SOC_AT32_AT32_PCM_H
-#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__
-
-#include <linux/atmel-ssc.h>
-
-
-/*
- * Registers and status bits that are required by the PCM driver
- * TODO: Is ptcr really used?
- */
-struct at32_pdc_regs {
- u32 xpr; /* PDC RX/TX pointer */
- u32 xcr; /* PDC RX/TX counter */
- u32 xnpr; /* PDC next RX/TX pointer */
- u32 xncr; /* PDC next RX/TX counter */
- u32 ptcr; /* PDC transfer control */
-};
-
-
-
-/*
- * SSC mask info
- */
-struct at32_ssc_mask {
- u32 ssc_enable; /* SSC RX/TX enable */
- u32 ssc_disable; /* SSC RX/TX disable */
- u32 ssc_endx; /* SSC ENDTX or ENDRX */
- u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */
- u32 pdc_enable; /* PDC RX/TX enable */
- u32 pdc_disable; /* PDC RX/TX disable */
-};
-
-
-
-/*
- * This structure, shared between the PCM driver and the interface,
- * contains all information required by the PCM driver to perform the
- * PDC DMA operation. All fields except dma_intr_handler() are initialized
- * by the interface. The dms_intr_handler() pointer is set by the PCM
- * driver and called by the interface SSC interrupt handler if it is
- * non-NULL.
- */
-struct at32_pcm_dma_params {
- char *name; /* stream identifier */
- int pdc_xfer_size; /* PDC counter increment in bytes */
- struct ssc_device *ssc; /* SSC device for stream */
- struct at32_pdc_regs *pdc; /* PDC register info */
- struct at32_ssc_mask *mask; /* SSC mask info */
- struct snd_pcm_substream *substream;
- void (*dma_intr_handler) (u32, struct snd_pcm_substream *);
-};
-
-
-
-/*
- * The AT32 ASoC platform driver
- */
-extern struct snd_soc_platform at32_soc_platform;
-
-
-
-/*
- * SSC register access (since ssc_writel() / ssc_readl() require literal name)
- */
-#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
-#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
-
-#endif /* __SOUND_SOC_AT32_AT32_PCM_H */
+++ /dev/null
-/* sound/soc/at32/at32-ssc.c
- * ASoC platform driver for AT32 using SSC as DAI
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Note that this is basically a port of the sound/soc/at91-ssc.c to
- * the AVR32 kernel. Thanks to Frank Mandarino for that code.
- */
-
-/* #define DEBUG */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/atmel_pdc.h>
-#include <linux/atmel-ssc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include "at32-pcm.h"
-#include "at32-ssc.h"
-
-
-
-/*-------------------------------------------------------------------------*\
- * Constants
-\*-------------------------------------------------------------------------*/
-#define NUM_SSC_DEVICES 3
-
-/*
- * SSC direction masks
- */
-#define SSC_DIR_MASK_UNUSED 0
-#define SSC_DIR_MASK_PLAYBACK 1
-#define SSC_DIR_MASK_CAPTURE 2
-
-/*
- * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
- * are expected to be used with SSC_BF
- */
-/* START bit field values */
-#define SSC_START_CONTINUOUS 0
-#define SSC_START_TX_RX 1
-#define SSC_START_LOW_RF 2
-#define SSC_START_HIGH_RF 3
-#define SSC_START_FALLING_RF 4
-#define SSC_START_RISING_RF 5
-#define SSC_START_LEVEL_RF 6
-#define SSC_START_EDGE_RF 7
-#define SSS_START_COMPARE_0 8
-
-/* CKI bit field values */
-#define SSC_CKI_FALLING 0
-#define SSC_CKI_RISING 1
-
-/* CKO bit field values */
-#define SSC_CKO_NONE 0
-#define SSC_CKO_CONTINUOUS 1
-#define SSC_CKO_TRANSFER 2
-
-/* CKS bit field values */
-#define SSC_CKS_DIV 0
-#define SSC_CKS_CLOCK 1
-#define SSC_CKS_PIN 2
-
-/* FSEDGE bit field values */
-#define SSC_FSEDGE_POSITIVE 0
-#define SSC_FSEDGE_NEGATIVE 1
-
-/* FSOS bit field values */
-#define SSC_FSOS_NONE 0
-#define SSC_FSOS_NEGATIVE 1
-#define SSC_FSOS_POSITIVE 2
-#define SSC_FSOS_LOW 3
-#define SSC_FSOS_HIGH 4
-#define SSC_FSOS_TOGGLE 5
-
-#define START_DELAY 1
-
-
-
-/*-------------------------------------------------------------------------*\
- * Module data
-\*-------------------------------------------------------------------------*/
-/*
- * SSC PDC registered required by the PCM DMA engine
- */
-static struct at32_pdc_regs pdc_tx_reg = {
- .xpr = SSC_PDC_TPR,
- .xcr = SSC_PDC_TCR,
- .xnpr = SSC_PDC_TNPR,
- .xncr = SSC_PDC_TNCR,
-};
-
-
-
-static struct at32_pdc_regs pdc_rx_reg = {
- .xpr = SSC_PDC_RPR,
- .xcr = SSC_PDC_RCR,
- .xnpr = SSC_PDC_RNPR,
- .xncr = SSC_PDC_RNCR,
-};
-
-
-
-/*
- * SSC and PDC status bits for transmit and receive
- */
-static struct at32_ssc_mask ssc_tx_mask = {
- .ssc_enable = SSC_BIT(CR_TXEN),
- .ssc_disable = SSC_BIT(CR_TXDIS),
- .ssc_endx = SSC_BIT(SR_ENDTX),
- .ssc_endbuf = SSC_BIT(SR_TXBUFE),
- .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS),
-};
-
-
-
-static struct at32_ssc_mask ssc_rx_mask = {
- .ssc_enable = SSC_BIT(CR_RXEN),
- .ssc_disable = SSC_BIT(CR_RXDIS),
- .ssc_endx = SSC_BIT(SR_ENDRX),
- .ssc_endbuf = SSC_BIT(SR_RXBUFF),
- .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN),
- .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS),
-};
-
-
-
-/*
- * DMA parameters for each SSC
- */
-static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
- {
- {
- .name = "SSC0 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC0 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC1 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC1 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
- {
- {
- .name = "SSC2 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC2 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- },
- },
-};
-
-
-
-static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = {
- {
- .name = "ssc0",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc1",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
- {
- .name = "ssc2",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
- .dir_mask = SSC_DIR_MASK_UNUSED,
- .initialized = 0,
- },
-};
-
-
-
-
-/*-------------------------------------------------------------------------*\
- * ISR
-\*-------------------------------------------------------------------------*/
-/*
- * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt
- * handler in the PCM driver.
- */
-static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id)
-{
- struct at32_ssc_info *ssc_p = dev_id;
- struct at32_pcm_dma_params *dma_params;
- u32 ssc_sr;
- u32 ssc_substream_mask;
- int i;
-
- ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) &
- ssc_readl(ssc_p->ssc->regs, IMR));
-
- /*
- * Loop through substreams attached to this SSC. If a DMA-related
- * interrupt occured on that substream, call the DMA interrupt
- * handler function, if one has been registered in the dma_param
- * structure by the PCM driver.
- */
- for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
- dma_params = ssc_p->dma_params[i];
-
- if ((dma_params != NULL) &&
- (dma_params->dma_intr_handler != NULL)) {
- ssc_substream_mask = (dma_params->mask->ssc_endx |
- dma_params->mask->ssc_endbuf);
- if (ssc_sr & ssc_substream_mask) {
- dma_params->dma_intr_handler(ssc_sr,
- dma_params->
- substream);
- }
- }
- }
-
-
- return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*\
- * DAI functions
-\*-------------------------------------------------------------------------*/
-/*
- * Startup. Only that one substream allowed in each direction.
- */
-static int at32_ssc_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- int dir_mask;
-
- dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE);
-
- spin_lock_irq(&ssc_p->lock);
- if (ssc_p->dir_mask & dir_mask) {
- spin_unlock_irq(&ssc_p->lock);
- return -EBUSY;
- }
- ssc_p->dir_mask |= dir_mask;
- spin_unlock_irq(&ssc_p->lock);
-
- return 0;
-}
-
-
-
-/*
- * Shutdown. Clear DMA parameters and shutdown the SSC if there
- * are no other substreams open.
- */
-static void at32_ssc_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
- int dir_mask;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- if (dma_params != NULL) {
- ssc_writel(dma_params->ssc->regs, CR,
- dma_params->mask->ssc_disable);
- pr_debug("%s disabled SSC_SR=0x%08x\n",
- (substream->stream ? "receiver" : "transmit"),
- ssc_readl(ssc_p->ssc->regs, SR));
-
- dma_params->ssc = NULL;
- dma_params->substream = NULL;
- ssc_p->dma_params[substream->stream] = NULL;
- }
-
-
- dir_mask = 1 << substream->stream;
- spin_lock_irq(&ssc_p->lock);
- ssc_p->dir_mask &= ~dir_mask;
- if (!ssc_p->dir_mask) {
- /* Shutdown the SSC clock */
- pr_debug("at32-ssc: Stopping user %d clock\n",
- ssc_p->ssc->user);
- clk_disable(ssc_p->ssc->clk);
-
- if (ssc_p->initialized) {
- free_irq(ssc_p->ssc->irq, ssc_p);
- ssc_p->initialized = 0;
- }
-
- /* Reset the SSC */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- /* clear the SSC dividers */
- ssc_p->cmr_div = 0;
- ssc_p->tcmr_period = 0;
- ssc_p->rcmr_period = 0;
- }
- spin_unlock_irq(&ssc_p->lock);
-}
-
-
-
-/*
- * Set the SSC system clock rate
- */
-static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- /* TODO: What the heck do I do here? */
- return 0;
-}
-
-
-
-/*
- * Record DAI format for use by hw_params()
- */
-static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- ssc_p->daifmt = fmt;
- return 0;
-}
-
-
-
-/*
- * Record SSC clock dividers for use in hw_params()
- */
-static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- switch (div_id) {
- case AT32_SSC_CMR_DIV:
- /*
- * The same master clock divider is used for both
- * transmit and receive, so if a value has already
- * been set, it must match this value
- */
- if (ssc_p->cmr_div == 0)
- ssc_p->cmr_div = div;
- else if (div != ssc_p->cmr_div)
- return -EBUSY;
- break;
-
- case AT32_SSC_TCMR_PERIOD:
- ssc_p->tcmr_period = div;
- break;
-
- case AT32_SSC_RCMR_PERIOD:
- ssc_p->rcmr_period = div;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-
-
-/*
- * Configure the SSC
- */
-static int at32_ssc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int id = rtd->dai->cpu_dai->id;
- struct at32_ssc_info *ssc_p = &ssc_info[id];
- struct at32_pcm_dma_params *dma_params;
- int channels, bits;
- u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
- int ret;
-
-
- /*
- * Currently, there is only one set of dma_params for each direction.
- * If more are added, this code will have to be changed to select
- * the proper set
- */
- dma_params = &ssc_dma_params[id][substream->stream];
- dma_params->ssc = ssc_p->ssc;
- dma_params->substream = substream;
-
- ssc_p->dma_params[substream->stream] = dma_params;
-
-
- /*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the PCM driver's hw_params()
- * function. It should not be used for other purposes as it
- * is common to all substreams.
- */
- rtd->dai->cpu_dai->dma_data = dma_params;
-
- channels = params_channels(params);
-
-
- /*
- * Determine sample size in bits and the PDC increment
- */
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- bits = 8;
- dma_params->pdc_xfer_size = 1;
- break;
-
- case SNDRV_PCM_FORMAT_S16:
- bits = 16;
- dma_params->pdc_xfer_size = 2;
- break;
-
- case SNDRV_PCM_FORMAT_S24:
- bits = 24;
- dma_params->pdc_xfer_size = 4;
- break;
-
- case SNDRV_PCM_FORMAT_S32:
- bits = 32;
- dma_params->pdc_xfer_size = 4;
- break;
-
- default:
- pr_warning("at32-ssc: Unsupported PCM format %d",
- params_format(params));
- return -EINVAL;
- }
- pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n",
- bits, dma_params->pdc_xfer_size, channels);
-
-
- /*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field.
- */
- if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S)
- if (bits > 16) {
- pr_warning("at32-ssc: "
- "sample size %d is too large for I2S\n",
- bits);
- return -EINVAL;
- }
-
-
- /*
- * Compute the SSC register settings
- */
- switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK |
- SND_SOC_DAIFMT_MASTER_MASK)) {
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * I2S format, SSC provides BCLK and LRS clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(RFMR_FSLEN, bits - 1) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, SSC_START_FALLING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) |
- SSC_BF(TFMR_FSLEN, bits - 1) |
- SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) |
- SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
- /*
- * I2S format, CODEC supplies BCLK and LRC clock.
- *
- * The SSC transmit clock is obtained from the BCLK signal
- * on the TK line, and the SSC receive clock is generated from
- * the transmit clock.
- *
- * For single channel data, one sample is transferred on the
- * falling edge of the LRC clock. For two channel data, one
- * sample is transferred on both edges of the LRC clock.
- */
- pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n");
- start_event = ((channels == 1) ?
- SSC_START_FALLING_RF : SSC_START_EDGE_RF);
-
- rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) |
- SSC_BF(RCMR_START, start_event) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_CLOCK));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) |
- SSC_BF(TCMR_START, start_event) |
- SSC_BF(TCMR_CKI, SSC_CKI_FALLING) |
- SSC_BF(TCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(TCMR_CKS, SSC_CKS_PIN));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line
- */
- pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n");
- rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) |
- SSC_BF(RCMR_STTDLY, 1) |
- SSC_BF(RCMR_START, SSC_START_RISING_RF) |
- SSC_BF(RCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(RCMR_CKO, SSC_CKO_NONE) |
- SSC_BF(RCMR_CKS, SSC_CKS_DIV));
-
- rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(RFMR_DATNB, channels - 1) |
- SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1));
-
- tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) |
- SSC_BF(TCMR_STTDLY, 1) |
- SSC_BF(TCMR_START, SSC_START_RISING_RF) |
- SSC_BF(TCMR_CKI, SSC_CKI_RISING) |
- SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) |
- SSC_BF(TCMR_CKS, SSC_CKS_DIV));
-
- tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) |
- SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) |
- SSC_BF(TFMR_DATNB, channels - 1) |
- SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1));
- break;
-
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
- default:
- pr_warning("at32-ssc: unsupported DAI format 0x%x\n",
- ssc_p->daifmt);
- return -EINVAL;
- break;
- }
- pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
- rcmr, rfmr, tcmr, tfmr);
-
-
- if (!ssc_p->initialized) {
- /* enable peripheral clock */
- pr_debug("at32-ssc: Starting clock\n");
- clk_enable(ssc_p->ssc->clk);
-
- /* Reset the SSC and its PDC registers */
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
-
- ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
-
- ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
- ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
-
- ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0,
- ssc_p->name, ssc_p);
- if (ret < 0) {
- pr_warning("at32-ssc: request irq failed (%d)\n", ret);
- pr_debug("at32-ssc: Stopping clock\n");
- clk_disable(ssc_p->ssc->clk);
- return ret;
- }
-
- ssc_p->initialized = 1;
- }
-
- /* Set SSC clock mode register */
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
-
- /* set receive clock mode and format */
- ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
-
- /* set transmit clock mode and format */
- ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
- ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
-
- pr_debug("at32-ssc: SSC initialized\n");
- return 0;
-}
-
-
-
-static int at32_ssc_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at32_pcm_dma_params *dma_params;
-
- dma_params = ssc_p->dma_params[substream->stream];
-
- ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable);
-
- return 0;
-}
-
-
-
-#ifdef CONFIG_PM
-static int at32_ssc_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* Save the status register before disabling transmit and receive */
- ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
- ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
-
- /* Save the current interrupt mask, then disable unmasked interrupts */
- ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
- ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
-
- ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
- ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
- ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
- ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
- ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
-
- return 0;
-}
-
-
-
-static int at32_ssc_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at32_ssc_info *ssc_p;
- u32 cr;
-
- if (!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* restore SSC register settings */
- ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
- ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
- ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
- ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
- ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
-
- /* re-enable interrupts */
- ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
-
- /* Re-enable recieve and transmit as appropriate */
- cr = 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
- cr |=
- (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
- ssc_writel(ssc_p->ssc->regs, CR, cr);
-
- return 0;
-}
-#else /* CONFIG_PM */
-# define at32_ssc_suspend NULL
-# define at32_ssc_resume NULL
-#endif /* CONFIG_PM */
-
-
-#define AT32_SSC_RATES \
- (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
- SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
-
-
-#define AT32_SSC_FORMATS \
- (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \
- SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32)
-
-
-struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = {
- {
- .name = "at32-ssc0",
- .id = 0,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[0],
- },
- {
- .name = "at32-ssc1",
- .id = 1,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[1],
- },
- {
- .name = "at32-ssc2",
- .id = 2,
- .type = SND_SOC_DAI_PCM,
- .suspend = at32_ssc_suspend,
- .resume = at32_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT32_SSC_RATES,
- .formats = AT32_SSC_FORMATS,
- },
- .ops = {
- .startup = at32_ssc_startup,
- .shutdown = at32_ssc_shutdown,
- .prepare = at32_ssc_prepare,
- .hw_params = at32_ssc_hw_params,
- },
- .dai_ops = {
- .set_sysclk = at32_ssc_set_dai_sysclk,
- .set_fmt = at32_ssc_set_dai_fmt,
- .set_clkdiv = at32_ssc_set_dai_clkdiv,
- },
- .private_data = &ssc_info[2],
- },
-};
-EXPORT_SYMBOL_GPL(at32_ssc_dai);
-
-
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("AT32 SSC ASoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* sound/soc/at32/at32-ssc.h
- * ASoC SSC interface for Atmel AT32 SoC
- *
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __SOUND_SOC_AT32_AT32_SSC_H
-#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__
-
-#include <linux/types.h>
-#include <linux/atmel-ssc.h>
-
-#include "at32-pcm.h"
-
-
-
-struct at32_ssc_state {
- u32 ssc_cmr;
- u32 ssc_rcmr;
- u32 ssc_rfmr;
- u32 ssc_tcmr;
- u32 ssc_tfmr;
- u32 ssc_sr;
- u32 ssc_imr;
-};
-
-
-
-struct at32_ssc_info {
- char *name;
- struct ssc_device *ssc;
- spinlock_t lock; /* lock for dir_mask */
- unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
- unsigned short initialized; /* true if SSC has been initialized */
- unsigned short daifmt;
- unsigned short cmr_div;
- unsigned short tcmr_period;
- unsigned short rcmr_period;
- struct at32_pcm_dma_params *dma_params[2];
- struct at32_ssc_state ssc_state;
-};
-
-
-/* SSC divider ids */
-#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */
-#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
-#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
-
-
-extern struct snd_soc_dai at32_ssc_dai[];
-
-
-
-#endif /* __SOUND_SOC_AT32_AT32_SSC_H */
+++ /dev/null
-config SND_AT91_SOC
- tristate "SoC Audio for the Atmel AT91 System-on-Chip"
- depends on ARCH_AT91
- help
- Say Y or M if you want to add support for codecs attached to
- the AT91 SSC interface. You will also need
- to select the audio interfaces to support below.
-
-config SND_AT91_SOC_SSC
- tristate
+++ /dev/null
-# AT91 Platform Support
-snd-soc-at91-objs := at91-pcm.o
-snd-soc-at91-ssc-objs := at91-ssc.o
-
-obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o
-obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o
+++ /dev/null
-/*
- * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Mar 3, 2006
- *
- * Based on pxa2xx-pcm.c by:
- *
- * Author: Nicolas Pitre
- * Created: Nov 30, 2004
- * Copyright: (C) 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/atmel_pdc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_ssc.h>
-
-#include "at91-pcm.h"
-
-#if 0
-#define DBG(x...) printk(KERN_INFO "at91-pcm: " x)
-#else
-#define DBG(x...)
-#endif
-
-static const struct snd_pcm_hardware at91_pcm_hardware = {
- .info = SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_PAUSE,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
- .period_bytes_min = 32,
- .period_bytes_max = 8192,
- .periods_min = 2,
- .periods_max = 1024,
- .buffer_bytes_max = 32 * 1024,
-};
-
-struct at91_runtime_data {
- struct at91_pcm_dma_params *params;
- dma_addr_t dma_buffer; /* physical address of dma buffer */
- dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
- size_t period_size;
- dma_addr_t period_ptr; /* physical address of next period */
- u32 pdc_xpr_save; /* PDC register save */
- u32 pdc_xcr_save;
- u32 pdc_xnpr_save;
- u32 pdc_xncr_save;
-};
-
-static void at91_pcm_dma_irq(u32 ssc_sr,
- struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- static int count = 0;
-
- count++;
-
- if (ssc_sr & params->mask->ssc_endbuf) {
-
- printk(KERN_WARNING
- "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK
- ? "underrun" : "overrun",
- params->name, ssc_sr, count);
-
- /* re-start the PDC */
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
-
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end) {
- prtd->period_ptr = prtd->dma_buffer;
- }
-
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- }
-
- if (ssc_sr & params->mask->ssc_endx) {
-
- /* Load the PDC next pointer and counter registers */
- prtd->period_ptr += prtd->period_size;
- if (prtd->period_ptr >= prtd->dma_buffer_end) {
- prtd->period_ptr = prtd->dma_buffer;
- }
- at91_ssc_write(params->ssc_base + params->pdc->xnpr,
- prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
- }
-
- snd_pcm_period_elapsed(substream);
-}
-
-static int at91_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
-
- /* this may get called several times by oss emulation
- * with different params */
-
- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
- runtime->dma_bytes = params_buffer_bytes(params);
-
- prtd->params = rtd->dai->cpu_dai->dma_data;
- prtd->params->dma_intr_handler = at91_pcm_dma_irq;
-
- prtd->dma_buffer = runtime->dma_addr;
- prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
- prtd->period_size = params_period_bytes(params);
-
- DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n",
- prtd->params->name, runtime->dma_bytes, prtd->period_size);
- return 0;
-}
-
-static int at91_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
-
- if (params != NULL) {
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- prtd->params->dma_intr_handler = NULL;
- }
-
- return 0;
-}
-
-static int at91_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
-
- at91_ssc_write(params->ssc_base + AT91_SSC_IDR,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- return 0;
-}
-
-static int at91_pcm_trigger(struct snd_pcm_substream *substream,
- int cmd)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- int ret = 0;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- prtd->period_ptr = prtd->dma_buffer;
-
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xcr,
- prtd->period_size / params->pdc_xfer_size);
-
- prtd->period_ptr += prtd->period_size;
- at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr);
- at91_ssc_write(params->ssc_base + params->pdc->xncr,
- prtd->period_size / params->pdc_xfer_size);
-
- DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n",
- (unsigned long) prtd->period_ptr,
- at91_ssc_read(params->ssc_base + params->pdc->xpr),
- at91_ssc_read(params->ssc_base + params->pdc->xcr),
- at91_ssc_read(params->ssc_base + params->pdc->xnpr),
- at91_ssc_read(params->ssc_base + params->pdc->xncr));
-
- at91_ssc_write(params->ssc_base + AT91_SSC_IER,
- params->mask->ssc_endx | params->mask->ssc_endbuf);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR,
- params->mask->pdc_enable);
-
- DBG("sr=%lx imr=%lx\n",
- at91_ssc_read(params->ssc_base + AT91_SSC_SR),
- at91_ssc_read(params->ssc_base + AT91_SSC_IMR));
- break;
-
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
- break;
-
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- break;
-
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static snd_pcm_uframes_t at91_pcm_pointer(
- struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd = runtime->private_data;
- struct at91_pcm_dma_params *params = prtd->params;
- dma_addr_t ptr;
- snd_pcm_uframes_t x;
-
- ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr);
- x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
-
- if (x == runtime->buffer_size)
- x = 0;
- return x;
-}
-
-static int at91_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct at91_runtime_data *prtd;
- int ret = 0;
-
- snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware);
-
- /* ensure that buffer size is a multiple of period size */
- ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- goto out;
-
- prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL);
- if (prtd == NULL) {
- ret = -ENOMEM;
- goto out;
- }
- runtime->private_data = prtd;
-
- out:
- return ret;
-}
-
-static int at91_pcm_close(struct snd_pcm_substream *substream)
-{
- struct at91_runtime_data *prtd = substream->runtime->private_data;
-
- kfree(prtd);
- return 0;
-}
-
-static int at91_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
-
- return dma_mmap_writecombine(substream->pcm->card->dev, vma,
- runtime->dma_area,
- runtime->dma_addr,
- runtime->dma_bytes);
-}
-
-struct snd_pcm_ops at91_pcm_ops = {
- .open = at91_pcm_open,
- .close = at91_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = at91_pcm_hw_params,
- .hw_free = at91_pcm_hw_free,
- .prepare = at91_pcm_prepare,
- .trigger = at91_pcm_trigger,
- .pointer = at91_pcm_pointer,
- .mmap = at91_pcm_mmap,
-};
-
-static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
- int stream)
-{
- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *buf = &substream->dma_buffer;
- size_t size = at91_pcm_hardware.buffer_bytes_max;
-
- buf->dev.type = SNDRV_DMA_TYPE_DEV;
- buf->dev.dev = pcm->card->dev;
- buf->private_data = NULL;
- buf->area = dma_alloc_writecombine(pcm->card->dev, size,
- &buf->addr, GFP_KERNEL);
-
- DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
- (void *) buf->area,
- (void *) buf->addr,
- size);
-
- if (!buf->area)
- return -ENOMEM;
-
- buf->bytes = size;
- return 0;
-}
-
-static u64 at91_pcm_dmamask = 0xffffffff;
-
-static int at91_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai, struct snd_pcm *pcm)
-{
- int ret = 0;
-
- if (!card->dev->dma_mask)
- card->dev->dma_mask = &at91_pcm_dmamask;
- if (!card->dev->coherent_dma_mask)
- card->dev->coherent_dma_mask = 0xffffffff;
-
- if (dai->playback.channels_min) {
- ret = at91_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_PLAYBACK);
- if (ret)
- goto out;
- }
-
- if (dai->capture.channels_min) {
- ret = at91_pcm_preallocate_dma_buffer(pcm,
- SNDRV_PCM_STREAM_CAPTURE);
- if (ret)
- goto out;
- }
- out:
- return ret;
-}
-
-static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm)
-{
- struct snd_pcm_substream *substream;
- struct snd_dma_buffer *buf;
- int stream;
-
- for (stream = 0; stream < 2; stream++) {
- substream = pcm->streams[stream].substream;
- if (!substream)
- continue;
-
- buf = &substream->dma_buffer;
- if (!buf->area)
- continue;
-
- dma_free_writecombine(pcm->card->dev, buf->bytes,
- buf->area, buf->addr);
- buf->area = NULL;
- }
-}
-
-#ifdef CONFIG_PM
-static int at91_pcm_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at91_runtime_data *prtd;
- struct at91_pcm_dma_params *params;
-
- if (!runtime)
- return 0;
-
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* disable the PDC and save the PDC registers */
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable);
-
- prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr);
- prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr);
- prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr);
- prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr);
-
- return 0;
-}
-
-static int at91_pcm_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
-{
- struct snd_pcm_runtime *runtime = dai->runtime;
- struct at91_runtime_data *prtd;
- struct at91_pcm_dma_params *params;
-
- if (!runtime)
- return 0;
-
- prtd = runtime->private_data;
- params = prtd->params;
-
- /* restore the PDC registers and enable the PDC */
- at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save);
- at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save);
-
- at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable);
- return 0;
-}
-#else
-#define at91_pcm_suspend NULL
-#define at91_pcm_resume NULL
-#endif
-
-struct snd_soc_platform at91_soc_platform = {
- .name = "at91-audio",
- .pcm_ops = &at91_pcm_ops,
- .pcm_new = at91_pcm_new,
- .pcm_free = at91_pcm_free_dma_buffers,
- .suspend = at91_pcm_suspend,
- .resume = at91_pcm_resume,
-};
-
-EXPORT_SYMBOL_GPL(at91_soc_platform);
-
-MODULE_AUTHOR("Frank Mandarino <fmandarino@endrelia.com>");
-MODULE_DESCRIPTION("Atmel AT91 PCM module");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Mar 3, 2006
- *
- * Based on pxa2xx-pcm.h by:
- *
- * Author: Nicolas Pitre
- * Created: Nov 30, 2004
- * Copyright: MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _AT91_PCM_H
-#define _AT91_PCM_H
-
-#include <mach/hardware.h>
-
-struct at91_ssc_periph {
- void __iomem *base;
- u32 pid;
-};
-
-/*
- * Registers and status bits that are required by the PCM driver.
- */
-struct at91_pdc_regs {
- unsigned int xpr; /* PDC recv/trans pointer */
- unsigned int xcr; /* PDC recv/trans counter */
- unsigned int xnpr; /* PDC next recv/trans pointer */
- unsigned int xncr; /* PDC next recv/trans counter */
- unsigned int ptcr; /* PDC transfer control */
-};
-
-struct at91_ssc_mask {
- u32 ssc_enable; /* SSC recv/trans enable */
- u32 ssc_disable; /* SSC recv/trans disable */
- u32 ssc_endx; /* SSC ENDTX or ENDRX */
- u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
- u32 pdc_enable; /* PDC recv/trans enable */
- u32 pdc_disable; /* PDC recv/trans disable */
-};
-
-/*
- * This structure, shared between the PCM driver and the interface,
- * contains all information required by the PCM driver to perform the
- * PDC DMA operation. All fields except dma_intr_handler() are initialized
- * by the interface. The dms_intr_handler() pointer is set by the PCM
- * driver and called by the interface SSC interrupt handler if it is
- * non-NULL.
- */
-struct at91_pcm_dma_params {
- char *name; /* stream identifier */
- int pdc_xfer_size; /* PDC counter increment in bytes */
- void __iomem *ssc_base; /* SSC base address */
- struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */
- struct at91_ssc_mask *mask;/* SSC & PDC status bits */
- struct snd_pcm_substream *substream;
- void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
-};
-
-extern struct snd_soc_platform at91_soc_platform;
-
-#define at91_ssc_read(a) ((unsigned long) __raw_readl(a))
-#define at91_ssc_write(a,v) __raw_writel((v),(a))
-
-#endif /* _AT91_PCM_H */
+++ /dev/null
-/*
- * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- *
- * Based on pxa2xx Platform drivers by
- * Liam Girdwood <lrg@slimlogic.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/atmel_pdc.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_ssc.h>
-
-#include "at91-pcm.h"
-#include "at91-ssc.h"
-
-#if 0
-#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x)
-#else
-#define DBG(x...)
-#endif
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
-#define NUM_SSC_DEVICES 1
-#else
-#define NUM_SSC_DEVICES 3
-#endif
-
-
-/*
- * SSC PDC registers required by the PCM DMA engine.
- */
-static struct at91_pdc_regs pdc_tx_reg = {
- .xpr = ATMEL_PDC_TPR,
- .xcr = ATMEL_PDC_TCR,
- .xnpr = ATMEL_PDC_TNPR,
- .xncr = ATMEL_PDC_TNCR,
-};
-
-static struct at91_pdc_regs pdc_rx_reg = {
- .xpr = ATMEL_PDC_RPR,
- .xcr = ATMEL_PDC_RCR,
- .xnpr = ATMEL_PDC_RNPR,
- .xncr = ATMEL_PDC_RNCR,
-};
-
-/*
- * SSC & PDC status bits for transmit and receive.
- */
-static struct at91_ssc_mask ssc_tx_mask = {
- .ssc_enable = AT91_SSC_TXEN,
- .ssc_disable = AT91_SSC_TXDIS,
- .ssc_endx = AT91_SSC_ENDTX,
- .ssc_endbuf = AT91_SSC_TXBUFE,
- .pdc_enable = ATMEL_PDC_TXTEN,
- .pdc_disable = ATMEL_PDC_TXTDIS,
-};
-
-static struct at91_ssc_mask ssc_rx_mask = {
- .ssc_enable = AT91_SSC_RXEN,
- .ssc_disable = AT91_SSC_RXDIS,
- .ssc_endx = AT91_SSC_ENDRX,
- .ssc_endbuf = AT91_SSC_RXBUFF,
- .pdc_enable = ATMEL_PDC_RXTEN,
- .pdc_disable = ATMEL_PDC_RXTDIS,
-};
-
-
-/*
- * DMA parameters.
- */
-static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
- {{
- .name = "SSC0 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC0 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
-#if NUM_SSC_DEVICES == 3
- {{
- .name = "SSC1 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC1 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
- {{
- .name = "SSC2 PCM out",
- .pdc = &pdc_tx_reg,
- .mask = &ssc_tx_mask,
- },
- {
- .name = "SSC2 PCM in",
- .pdc = &pdc_rx_reg,
- .mask = &ssc_rx_mask,
- }},
-#endif
-};
-
-struct at91_ssc_state {
- u32 ssc_cmr;
- u32 ssc_rcmr;
- u32 ssc_rfmr;
- u32 ssc_tcmr;
- u32 ssc_tfmr;
- u32 ssc_sr;
- u32 ssc_imr;
-};
-
-static struct at91_ssc_info {
- char *name;
- struct at91_ssc_periph ssc;
- spinlock_t lock; /* lock for dir_mask */
- unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
- unsigned short initialized; /* 1=SSC has been initialized */
- unsigned short daifmt;
- unsigned short cmr_div;
- unsigned short tcmr_period;
- unsigned short rcmr_period;
- struct at91_pcm_dma_params *dma_params[2];
- struct at91_ssc_state ssc_state;
-
-} ssc_info[NUM_SSC_DEVICES] = {
- {
- .name = "ssc0",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
-#if NUM_SSC_DEVICES == 3
- {
- .name = "ssc1",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
- {
- .name = "ssc2",
- .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
- .dir_mask = 0,
- .initialized = 0,
- },
-#endif
-};
-
-static unsigned int at91_ssc_sysclk;
-
-/*
- * SSC interrupt handler. Passes PDC interrupts to the DMA
- * interrupt handler in the PCM driver.
- */
-static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id)
-{
- struct at91_ssc_info *ssc_p = dev_id;
- struct at91_pcm_dma_params *dma_params;
- u32 ssc_sr;
- int i;
-
- ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)
- & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR);
-
- /*
- * Loop through the substreams attached to this SSC. If
- * a DMA-related interrupt occurred on that substream, call
- * the DMA interrupt handler function, if one has been
- * registered in the dma_params structure by the PCM driver.
- */
- for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
- dma_params = ssc_p->dma_params[i];
-
- if (dma_params != NULL && dma_params->dma_intr_handler != NULL &&
- (ssc_sr &
- (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf)))
-
- dma_params->dma_intr_handler(ssc_sr, dma_params->substream);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Startup. Only that one substream allowed in each direction.
- */
-static int at91_ssc_startup(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- int dir_mask;
-
- DBG("ssc_startup: SSC_SR=0x%08lx\n",
- at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR));
- dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2;
-
- spin_lock_irq(&ssc_p->lock);
- if (ssc_p->dir_mask & dir_mask) {
- spin_unlock_irq(&ssc_p->lock);
- return -EBUSY;
- }
- ssc_p->dir_mask |= dir_mask;
- spin_unlock_irq(&ssc_p->lock);
-
- return 0;
-}
-
-/*
- * Shutdown. Clear DMA parameters and shutdown the SSC if there
- * are no other substreams open.
- */
-static void at91_ssc_shutdown(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at91_pcm_dma_params *dma_params;
- int dir, dir_mask;
-
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- dma_params = ssc_p->dma_params[dir];
-
- if (dma_params != NULL) {
- at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR,
- dma_params->mask->ssc_disable);
- DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"),
- at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR));
-
- dma_params->ssc_base = NULL;
- dma_params->substream = NULL;
- ssc_p->dma_params[dir] = NULL;
- }
-
- dir_mask = 1 << dir;
-
- spin_lock_irq(&ssc_p->lock);
- ssc_p->dir_mask &= ~dir_mask;
- if (!ssc_p->dir_mask) {
- /* Shutdown the SSC clock. */
- DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid);
-
- if (ssc_p->initialized) {
- free_irq(ssc_p->ssc.pid, ssc_p);
- ssc_p->initialized = 0;
- }
-
- /* Reset the SSC */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST);
-
- /* Clear the SSC dividers */
- ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
- }
- spin_unlock_irq(&ssc_p->lock);
-}
-
-/*
- * Record the SSC system clock rate.
- */
-static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
- int clk_id, unsigned int freq, int dir)
-{
- /*
- * The only clock supplied to the SSC is the AT91 master clock,
- * which is only used if the SSC is generating BCLK and/or
- * LRC clocks.
- */
- switch (clk_id) {
- case AT91_SYSCLK_MCK:
- at91_ssc_sysclk = freq;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Record the DAI format for use in hw_params().
- */
-static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- ssc_p->daifmt = fmt;
- return 0;
-}
-
-/*
- * Record SSC clock dividers for use in hw_params().
- */
-static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
- int div_id, int div)
-{
- struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
-
- switch (div_id) {
- case AT91SSC_CMR_DIV:
- /*
- * The same master clock divider is used for both
- * transmit and receive, so if a value has already
- * been set, it must match this value.
- */
- if (ssc_p->cmr_div == 0)
- ssc_p->cmr_div = div;
- else
- if (div != ssc_p->cmr_div)
- return -EBUSY;
- break;
-
- case AT91SSC_TCMR_PERIOD:
- ssc_p->tcmr_period = div;
- break;
-
- case AT91SSC_RCMR_PERIOD:
- ssc_p->rcmr_period = div;
- break;
-
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
- * Configure the SSC.
- */
-static int at91_ssc_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- int id = rtd->dai->cpu_dai->id;
- struct at91_ssc_info *ssc_p = &ssc_info[id];
- struct at91_pcm_dma_params *dma_params;
- int dir, channels, bits;
- u32 tfmr, rfmr, tcmr, rcmr;
- int start_event;
- int ret;
-
- /*
- * Currently, there is only one set of dma params for
- * each direction. If more are added, this code will
- * have to be changed to select the proper set.
- */
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
-
- dma_params = &ssc_dma_params[id][dir];
- dma_params->ssc_base = ssc_p->ssc.base;
- dma_params->substream = substream;
-
- ssc_p->dma_params[dir] = dma_params;
-
- /*
- * The cpu_dai->dma_data field is only used to communicate the
- * appropriate DMA parameters to the pcm driver hw_params()
- * function. It should not be used for other purposes
- * as it is common to all substreams.
- */
- rtd->dai->cpu_dai->dma_data = dma_params;
-
- channels = params_channels(params);
-
- /*
- * Determine sample size in bits and the PDC increment.
- */
- switch(params_format(params)) {
- case SNDRV_PCM_FORMAT_S8:
- bits = 8;
- dma_params->pdc_xfer_size = 1;
- break;
- case SNDRV_PCM_FORMAT_S16_LE:
- bits = 16;
- dma_params->pdc_xfer_size = 2;
- break;
- case SNDRV_PCM_FORMAT_S24_LE:
- bits = 24;
- dma_params->pdc_xfer_size = 4;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- bits = 32;
- dma_params->pdc_xfer_size = 4;
- break;
- default:
- printk(KERN_WARNING "at91-ssc: unsupported PCM format\n");
- return -EINVAL;
- }
-
- /*
- * The SSC only supports up to 16-bit samples in I2S format, due
- * to the size of the Frame Mode Register FSLEN field.
- */
- if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
- && bits > 16) {
- printk(KERN_WARNING
- "at91-ssc: sample size %d is too large for I2S\n", bits);
- return -EINVAL;
- }
-
- /*
- * Compute SSC register settings.
- */
- switch (ssc_p->daifmt
- & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * I2S format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line.
- */
- rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS)
- | (((bits - 1) << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS)
- | (((bits - 1) << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
- break;
-
- case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
- /*
- * I2S format, CODEC supplies BCLK and LRC clocks.
- *
- * The SSC transmit clock is obtained from the BCLK signal on
- * on the TK line, and the SSC receive clock is generated from the
- * transmit clock.
- *
- * For single channel data, one sample is transferred on the falling
- * edge of the LRC clock. For two channel data, one sample is
- * transferred on both edges of the LRC clock.
- */
- start_event = channels == 1
- ? AT91_SSC_START_FALLING_RF
- : AT91_SSC_START_EDGE_RF;
-
- rcmr = (( 0 << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( start_event ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (( 0 << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( 0 << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( start_event ) & AT91_SSC_START)
- | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (( 0 << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
- break;
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
- /*
- * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
- *
- * The SSC transmit and receive clocks are generated from the
- * MCK divider, and the BCLK signal is output on the SSC TK line.
- */
- rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_LOOP)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
- tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD)
- | (( 1 << 16) & AT91_SSC_STTDLY)
- | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START)
- | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI)
- | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO)
- | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS);
-
- tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE)
- | (( 0 << 23) & AT91_SSC_FSDEN)
- | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS)
- | (( 0 << 16) & AT91_SSC_FSLEN)
- | (((channels - 1) << 8) & AT91_SSC_DATNB)
- | (( 1 << 7) & AT91_SSC_MSBF)
- | (( 0 << 5) & AT91_SSC_DATDEF)
- | (((bits - 1) << 0) & AT91_SSC_DATALEN);
-
-
-
- break;
-
- case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
- default:
- printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n",
- ssc_p->daifmt);
- return -EINVAL;
- break;
- }
- DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr);
-
- if (!ssc_p->initialized) {
-
- /* Enable PMC peripheral clock for this SSC */
- DBG("Starting pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid);
-
- /* Reset the SSC and its PDC registers */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST);
-
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0);
- at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0);
-
- if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt,
- 0, ssc_p->name, ssc_p)) < 0) {
- printk(KERN_WARNING "at91-ssc: request_irq failure\n");
-
- DBG("Stopping pid %d clock\n", ssc_p->ssc.pid);
- at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid);
- return ret;
- }
-
- ssc_p->initialized = 1;
- }
-
- /* set SSC clock mode register */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div);
-
- /* set receive clock mode and format */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr);
-
- /* set transmit clock mode and format */
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr);
-
- DBG("hw_params: SSC initialized\n");
- return 0;
-}
-
-
-static int at91_ssc_prepare(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
- struct at91_pcm_dma_params *dma_params;
- int dir;
-
- dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1;
- dma_params = ssc_p->dma_params[dir];
-
- at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR,
- dma_params->mask->ssc_enable);
-
- DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit",
- at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR));
- return 0;
-}
-
-
-#ifdef CONFIG_PM
-static int at91_ssc_suspend(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at91_ssc_info *ssc_p;
-
- if(!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- /* Save the status register before disabling transmit and receive. */
- ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR,
- AT91_SSC_TXDIS | AT91_SSC_RXDIS);
-
- /* Save the current interrupt mask, then disable unmasked interrupts. */
- ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr);
-
- ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR);
- ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR);
- ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR);
- ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR);
- ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR);
-
- return 0;
-}
-
-static int at91_ssc_resume(struct platform_device *pdev,
- struct snd_soc_dai *cpu_dai)
-{
- struct at91_ssc_info *ssc_p;
-
- if(!cpu_dai->active)
- return 0;
-
- ssc_p = &ssc_info[cpu_dai->id];
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr);
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr);
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr);
-
- at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR,
- ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) |
- ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0));
-
- return 0;
-}
-
-#else
-#define at91_ssc_suspend NULL
-#define at91_ssc_resume NULL
-#endif
-
-#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
- SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
- SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
- SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\
- SNDRV_PCM_RATE_96000)
-
-#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
-
-struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = {
- { .name = "at91-ssc0",
- .id = 0,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[0].ssc,
- },
-#if NUM_SSC_DEVICES == 3
- { .name = "at91-ssc1",
- .id = 1,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[1].ssc,
- },
- { .name = "at91-ssc2",
- .id = 2,
- .type = SND_SOC_DAI_PCM,
- .suspend = at91_ssc_suspend,
- .resume = at91_ssc_resume,
- .playback = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .capture = {
- .channels_min = 1,
- .channels_max = 2,
- .rates = AT91_SSC_RATES,
- .formats = AT91_SSC_FORMATS,},
- .ops = {
- .startup = at91_ssc_startup,
- .shutdown = at91_ssc_shutdown,
- .prepare = at91_ssc_prepare,
- .hw_params = at91_ssc_hw_params,},
- .dai_ops = {
- .set_sysclk = at91_ssc_set_dai_sysclk,
- .set_fmt = at91_ssc_set_dai_fmt,
- .set_clkdiv = at91_ssc_set_dai_clkdiv,},
- .private_data = &ssc_info[2].ssc,
- },
-#endif
-};
-
-EXPORT_SYMBOL_GPL(at91_ssc_dai);
-
-/* Module information */
-MODULE_AUTHOR("Frank Mandarino, fmandarino@endrelia.com, www.endrelia.com");
-MODULE_DESCRIPTION("AT91 SSC ASoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC
- *
- * Author: Frank Mandarino <fmandarino@endrelia.com>
- * Endrelia Technologies Inc.
- * Created: Jan 9, 2007
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _AT91_SSC_H
-#define _AT91_SSC_H
-
-/* SSC system clock ids */
-#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
-
-/* SSC divider ids */
-#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */
-#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
-#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
-
-extern struct snd_soc_dai at91_ssc_dai[];
-
-#endif /* _AT91_SSC_H */
-
--- /dev/null
+config SND_ATMEL_SOC
+ tristate "SoC Audio for the Atmel System-on-Chip"
+ depends on ARCH_AT91 || AVR32
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the ATMEL SSC interface. You will also need
+ to select the audio interfaces to support below.
+
+config SND_ATMEL_SOC_SSC
+ tristate
+ depends on SND_ATMEL_SOC
+ help
+ Say Y or M if you want to add support for codecs the
+ ATMEL SSC interface. You will also needs to select the individual
+ machine drivers to support below.
+
+config SND_AT91_SOC_SAM9G20_WM8731
+ tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+ depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for SoC audio on WM8731-based
+ AT91sam9g20 evaluation board.
+
+config SND_AT32_SOC_PLAYPAQ
+ tristate "SoC Audio support for PlayPaq with WM8510"
+ depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8510
+ help
+ Say Y or M here if you want to add support for SoC audio
+ on the LRS PlayPaq.
+
+config SND_AT32_SOC_PLAYPAQ_SLAVE
+ bool "Run CODEC on PlayPaq in slave mode"
+ depends on SND_AT32_SOC_PLAYPAQ
+ default n
+ help
+ Say Y if you want to run with the AT32 SSC generating the BCLK
+ and FRAME signals on the PlayPaq. Unless you want to play
+ with the AT32 as the SSC master, you probably want to say N here,
+ as this will give you better sound quality.
--- /dev/null
+# AT91 Platform Support
+snd-soc-atmel-pcm-objs := atmel-pcm.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
+obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
+# AT91 Machine Support
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+
+# AT32 Machine Support
+snd-soc-playpaq-objs := playpaq_wm8510.o
+
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o
-/* sound/soc/at32/at32-pcm.c
- * ASoC PCM interface for Atmel AT32 SoC
+/*
+ * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC.
*
- * Copyright (C) 2008 Long Range Systems
- * Geoffrey Wossum <gwossum@acm.org>
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
*
- * Note that this is basically a port of the sound/soc/at91-pcm.c to
- * the AVR32 kernel. Thanks to Frank Mandarino for that code.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
+#include <linux/atmel-ssc.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
-#include "at32-pcm.h"
+#include <mach/hardware.h>
+#include "atmel-pcm.h"
/*--------------------------------------------------------------------------*\
/* TODO: These values were taken from the AT91 platform driver, check
* them against real values for AT32
*/
-static const struct snd_pcm_hardware at32_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_PAUSE),
-
- .formats = SNDRV_PCM_FMTBIT_S16,
- .period_bytes_min = 32,
- .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */
- .periods_min = 2,
- .periods_max = 1024,
- .buffer_bytes_max = 32 * 1024,
+static const struct snd_pcm_hardware atmel_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_PAUSE,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 2,
+ .periods_max = 1024,
+ .buffer_bytes_max = 32 * 1024,
};
-
/*--------------------------------------------------------------------------*\
* Data types
\*--------------------------------------------------------------------------*/
-struct at32_runtime_data {
- struct at32_pcm_dma_params *params;
- dma_addr_t dma_buffer; /* physical address of DMA buffer */
- dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
+struct atmel_runtime_data {
+ struct atmel_pcm_dma_params *params;
+ dma_addr_t dma_buffer; /* physical address of dma buffer */
+ dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
size_t period_size;
- dma_addr_t period_ptr; /* physical address of next period */
- int periods; /* period index of period_ptr */
+ dma_addr_t period_ptr; /* physical address of next period */
+ int periods; /* period index of period_ptr */
- /* Save PDC registers (for power management) */
+ /* PDC register save */
u32 pdc_xpr_save;
u32 pdc_xcr_save;
u32 pdc_xnpr_save;
};
-
/*--------------------------------------------------------------------------*\
* Helper functions
\*--------------------------------------------------------------------------*/
-static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
+static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+ int stream)
{
struct snd_pcm_substream *substream = pcm->streams[stream].substream;
- struct snd_dma_buffer *dmabuf = &substream->dma_buffer;
- size_t size = at32_pcm_hardware.buffer_bytes_max;
-
- dmabuf->dev.type = SNDRV_DMA_TYPE_DEV;
- dmabuf->dev.dev = pcm->card->dev;
- dmabuf->private_data = NULL;
- dmabuf->area = dma_alloc_coherent(pcm->card->dev, size,
- &dmabuf->addr, GFP_KERNEL);
- pr_debug("at32_pcm: preallocate_dma_buffer: "
- "area=%p, addr=%p, size=%ld\n",
- (void *)dmabuf->area, (void *)dmabuf->addr, size);
-
- if (!dmabuf->area)
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = atmel_pcm_hardware.buffer_bytes_max;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ pr_debug("atmel-pcm:"
+ "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
+ (void *) buf->area,
+ (void *) buf->addr,
+ size);
+
+ if (!buf->area)
return -ENOMEM;
- dmabuf->bytes = size;
+ buf->bytes = size;
return 0;
}
-
-
-
/*--------------------------------------------------------------------------*\
* ISR
\*--------------------------------------------------------------------------*/
-static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream)
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+ struct snd_pcm_substream *substream)
{
- struct snd_pcm_runtime *rtd = substream->runtime;
- struct at32_runtime_data *prtd = rtd->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
static int count;
count++;
+
if (ssc_sr & params->mask->ssc_endbuf) {
- pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
- substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
- "underrun" : "overrun", params->name, ssc_sr, count);
+ pr_warning("atmel-pcm: buffer %s on %s"
+ " (SSC_SR=%#x, count=%d)\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? "underrun" : "overrun",
+ params->name, ssc_sr, count);
/* re-start the PDC */
ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
if (prtd->period_ptr >= prtd->dma_buffer_end)
prtd->period_ptr = prtd->dma_buffer;
-
ssc_writex(params->ssc->regs, params->pdc->xpr,
prtd->period_ptr);
ssc_writex(params->ssc->regs, params->pdc->xcr,
params->mask->pdc_enable);
}
-
if (ssc_sr & params->mask->ssc_endx) {
/* Load the PDC next pointer and counter registers */
prtd->period_ptr += prtd->period_size;
if (prtd->period_ptr >= prtd->dma_buffer_end)
prtd->period_ptr = prtd->dma_buffer;
+
ssc_writex(params->ssc->regs, params->pdc->xnpr,
prtd->period_ptr);
ssc_writex(params->ssc->regs, params->pdc->xncr,
prtd->period_size / params->pdc_xfer_size);
}
-
snd_pcm_period_elapsed(substream);
}
-
/*--------------------------------------------------------------------------*\
* PCM operations
\*--------------------------------------------------------------------------*/
-static int at32_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd = runtime->private_data;
+ struct atmel_runtime_data *prtd = runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
/* this may get called several times by oss emulation
- * with different params
- */
+ * with different params */
+
snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
runtime->dma_bytes = params_buffer_bytes(params);
prtd->params = rtd->dai->cpu_dai->dma_data;
- prtd->params->dma_intr_handler = at32_pcm_dma_irq;
+ prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
prtd->dma_buffer = runtime->dma_addr;
prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
prtd->period_size = params_period_bytes(params);
- pr_debug("hw_params: DMA for %s initialized "
- "(dma_bytes=%ld, period_size=%ld)\n",
- prtd->params->name, runtime->dma_bytes, prtd->period_size);
-
+ pr_debug("atmel-pcm: "
+ "hw_params: DMA for %s initialized "
+ "(dma_bytes=%u, period_size=%u)\n",
+ prtd->params->name,
+ runtime->dma_bytes,
+ prtd->period_size);
return 0;
}
-
-
-static int at32_pcm_hw_free(struct snd_pcm_substream *substream)
+static int atmel_pcm_hw_free(struct snd_pcm_substream *substream)
{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
if (params != NULL) {
ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
return 0;
}
-
-
-static int at32_pcm_prepare(struct snd_pcm_substream *substream)
+static int atmel_pcm_prepare(struct snd_pcm_substream *substream)
{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
ssc_writex(params->ssc->regs, SSC_IDR,
params->mask->ssc_endx | params->mask->ssc_endbuf);
ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
params->mask->pdc_disable);
-
return 0;
}
-
-static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
struct snd_pcm_runtime *rtd = substream->runtime;
- struct at32_runtime_data *prtd = rtd->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
+ struct atmel_runtime_data *prtd = rtd->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
int ret = 0;
- pr_debug("at32_pcm_trigger: buffer_size = %ld, "
- "dma_area = %p, dma_bytes = %ld\n",
- rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
+ pr_debug("atmel-pcm:buffer_size = %ld,"
+ "dma_area = %p, dma_bytes = %u\n",
+ rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
ssc_writex(params->ssc->regs, params->pdc->xncr,
prtd->period_size / params->pdc_xfer_size);
- pr_debug("trigger: period_ptr=%lx, xpr=%x, "
- "xcr=%d, xnpr=%x, xncr=%d\n",
- (unsigned long)prtd->period_ptr,
- ssc_readx(params->ssc->regs, params->pdc->xpr),
- ssc_readx(params->ssc->regs, params->pdc->xcr),
- ssc_readx(params->ssc->regs, params->pdc->xnpr),
- ssc_readx(params->ssc->regs, params->pdc->xncr));
+ pr_debug("atmel-pcm: trigger: "
+ "period_ptr=%lx, xpr=%u, "
+ "xcr=%u, xnpr=%u, xncr=%u\n",
+ (unsigned long)prtd->period_ptr,
+ ssc_readx(params->ssc->regs, params->pdc->xpr),
+ ssc_readx(params->ssc->regs, params->pdc->xcr),
+ ssc_readx(params->ssc->regs, params->pdc->xnpr),
+ ssc_readx(params->ssc->regs, params->pdc->xncr));
ssc_writex(params->ssc->regs, SSC_IER,
params->mask->ssc_endx | params->mask->ssc_endbuf);
ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
params->mask->pdc_enable);
- pr_debug("sr=%x, imr=%x\n",
- ssc_readx(params->ssc->regs, SSC_SR),
- ssc_readx(params->ssc->regs, SSC_IER));
+ pr_debug("sr=%u imr=%u\n",
+ ssc_readx(params->ssc->regs, SSC_SR),
+ ssc_readx(params->ssc->regs, SSC_IER));
break; /* SNDRV_PCM_TRIGGER_START */
-
-
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
params->mask->pdc_disable);
break;
-
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
return ret;
}
-
-
-static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream)
+static snd_pcm_uframes_t atmel_pcm_pointer(
+ struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd = runtime->private_data;
- struct at32_pcm_dma_params *params = prtd->params;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
dma_addr_t ptr;
snd_pcm_uframes_t x;
return x;
}
-
-
-static int at32_pcm_open(struct snd_pcm_substream *substream)
+static int atmel_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
- struct at32_runtime_data *prtd;
+ struct atmel_runtime_data *prtd;
int ret = 0;
- snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware);
+ snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware);
/* ensure that buffer size is a multiple of period size */
ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
+ SNDRV_PCM_HW_PARAM_PERIODS);
if (ret < 0)
goto out;
- prtd = kzalloc(sizeof(*prtd), GFP_KERNEL);
+ prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL);
if (prtd == NULL) {
ret = -ENOMEM;
goto out;
}
runtime->private_data = prtd;
-
-out:
+ out:
return ret;
}
-
-
-static int at32_pcm_close(struct snd_pcm_substream *substream)
+static int atmel_pcm_close(struct snd_pcm_substream *substream)
{
- struct at32_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
kfree(prtd);
return 0;
}
-
-static int at32_pcm_mmap(struct snd_pcm_substream *substream,
- struct vm_area_struct *vma)
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
{
return remap_pfn_range(vma, vma->vm_start,
- substream->dma_buffer.addr >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot);
+ substream->dma_buffer.addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
-
-
-static struct snd_pcm_ops at32_pcm_ops = {
- .open = at32_pcm_open,
- .close = at32_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = at32_pcm_hw_params,
- .hw_free = at32_pcm_hw_free,
- .prepare = at32_pcm_prepare,
- .trigger = at32_pcm_trigger,
- .pointer = at32_pcm_pointer,
- .mmap = at32_pcm_mmap,
+struct snd_pcm_ops atmel_pcm_ops = {
+ .open = atmel_pcm_open,
+ .close = atmel_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = atmel_pcm_hw_params,
+ .hw_free = atmel_pcm_hw_free,
+ .prepare = atmel_pcm_prepare,
+ .trigger = atmel_pcm_trigger,
+ .pointer = atmel_pcm_pointer,
+ .mmap = atmel_pcm_mmap,
};
-
/*--------------------------------------------------------------------------*\
* ASoC platform driver
\*--------------------------------------------------------------------------*/
-static u64 at32_pcm_dmamask = 0xffffffff;
+static u64 atmel_pcm_dmamask = 0xffffffff;
-static int at32_pcm_new(struct snd_card *card,
- struct snd_soc_dai *dai,
- struct snd_pcm *pcm)
+static int atmel_pcm_new(struct snd_card *card,
+ struct snd_soc_dai *dai, struct snd_pcm *pcm)
{
int ret = 0;
if (!card->dev->dma_mask)
- card->dev->dma_mask = &at32_pcm_dmamask;
+ card->dev->dma_mask = &atmel_pcm_dmamask;
if (!card->dev->coherent_dma_mask)
card->dev->coherent_dma_mask = 0xffffffff;
if (dai->playback.channels_min) {
- ret = at32_pcm_preallocate_dma_buffer(
- pcm, SNDRV_PCM_STREAM_PLAYBACK);
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
if (ret)
goto out;
}
if (dai->capture.channels_min) {
- pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n");
- ret = at32_pcm_preallocate_dma_buffer(
- pcm, SNDRV_PCM_STREAM_CAPTURE);
+ pr_debug("at32-pcm:"
+ "Allocating PCM capture DMA buffer\n");
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
if (ret)
goto out;
}
-
-
-out:
+ out:
return ret;
}
-
-
-static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm)
+static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm)
{
struct snd_pcm_substream *substream;
struct snd_dma_buffer *buf;
for (stream = 0; stream < 2; stream++) {
substream = pcm->streams[stream].substream;
- if (substream == NULL)
+ if (!substream)
continue;
buf = &substream->dma_buffer;
}
}
-
-
#ifdef CONFIG_PM
-static int at32_pcm_suspend(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int atmel_pcm_suspend(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = dai->runtime;
- struct at32_runtime_data *prtd;
- struct at32_pcm_dma_params *params;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
- if (runtime == NULL)
+ if (!runtime)
return 0;
+
prtd = runtime->private_data;
params = prtd->params;
- /* Disable the PDC and save the PDC registers */
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
- params->mask->pdc_disable);
+ /* disable the PDC and save the PDC registers */
+
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable);
prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr);
prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr);
return 0;
}
-
-
-static int at32_pcm_resume(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int atmel_pcm_resume(struct platform_device *pdev,
+ struct snd_soc_dai *dai)
{
struct snd_pcm_runtime *runtime = dai->runtime;
- struct at32_runtime_data *prtd;
- struct at32_pcm_dma_params *params;
+ struct atmel_runtime_data *prtd;
+ struct atmel_pcm_dma_params *params;
- if (runtime == NULL)
+ if (!runtime)
return 0;
+
prtd = runtime->private_data;
params = prtd->params;
- /* Restore the PDC registers and enable the PDC */
+ /* restore the PDC registers and enable the PDC */
ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save);
ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save);
ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save);
ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save);
- ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable);
+ ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable);
return 0;
}
-#else /* CONFIG_PM */
-# define at32_pcm_suspend NULL
-# define at32_pcm_resume NULL
-#endif /* CONFIG_PM */
-
-
-
-struct snd_soc_platform at32_soc_platform = {
- .name = "at32-audio",
- .pcm_ops = &at32_pcm_ops,
- .pcm_new = at32_pcm_new,
- .pcm_free = at32_pcm_free_dma_buffers,
- .suspend = at32_pcm_suspend,
- .resume = at32_pcm_resume,
+#else
+#define atmel_pcm_suspend NULL
+#define atmel_pcm_resume NULL
+#endif
+
+struct snd_soc_platform atmel_soc_platform = {
+ .name = "atmel-audio",
+ .pcm_ops = &atmel_pcm_ops,
+ .pcm_new = atmel_pcm_new,
+ .pcm_free = atmel_pcm_free_dma_buffers,
+ .suspend = atmel_pcm_suspend,
+ .resume = atmel_pcm_resume,
};
-EXPORT_SYMBOL_GPL(at32_soc_platform);
-
-
+EXPORT_SYMBOL_GPL(atmel_soc_platform);
-MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>");
-MODULE_DESCRIPTION("Atmel AT32 PCM module");
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("Atmel PCM module");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_PCM_H
+#define _ATMEL_PCM_H
+
+#include <linux/atmel-ssc.h>
+
+/*
+ * Registers and status bits that are required by the PCM driver.
+ */
+struct atmel_pdc_regs {
+ unsigned int xpr; /* PDC recv/trans pointer */
+ unsigned int xcr; /* PDC recv/trans counter */
+ unsigned int xnpr; /* PDC next recv/trans pointer */
+ unsigned int xncr; /* PDC next recv/trans counter */
+ unsigned int ptcr; /* PDC transfer control */
+};
+
+struct atmel_ssc_mask {
+ u32 ssc_enable; /* SSC recv/trans enable */
+ u32 ssc_disable; /* SSC recv/trans disable */
+ u32 ssc_endx; /* SSC ENDTX or ENDRX */
+ u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
+ u32 pdc_enable; /* PDC recv/trans enable */
+ u32 pdc_disable; /* PDC recv/trans disable */
+};
+
+/*
+ * This structure, shared between the PCM driver and the interface,
+ * contains all information required by the PCM driver to perform the
+ * PDC DMA operation. All fields except dma_intr_handler() are initialized
+ * by the interface. The dms_intr_handler() pointer is set by the PCM
+ * driver and called by the interface SSC interrupt handler if it is
+ * non-NULL.
+ */
+struct atmel_pcm_dma_params {
+ char *name; /* stream identifier */
+ int pdc_xfer_size; /* PDC counter increment in bytes */
+ struct ssc_device *ssc; /* SSC device for stream */
+ struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */
+ struct atmel_ssc_mask *mask; /* SSC & PDC status bits */
+ struct snd_pcm_substream *substream;
+ void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
+};
+
+extern struct snd_soc_platform atmel_soc_platform;
+
+
+/*
+ * SSC register access (since ssc_writel() / ssc_readl() require literal name)
+ */
+#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
+#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
+
+#endif /* _ATMEL_PCM_H */
--- /dev/null
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#define NUM_SSC_DEVICES 1
+#else
+#define NUM_SSC_DEVICES 3
+#endif
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#if NUM_SSC_DEVICES == 3
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#endif
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#if NUM_SSC_DEVICES == 3
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#endif
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct atmel_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ u32 ssc_substream_mask;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if ((dma_params != NULL) &&
+ (dma_params->dma_intr_handler != NULL)) {
+ ssc_substream_mask = (dma_params->mask->ssc_endx |
+ dma_params->mask->ssc_endbuf);
+ if (ssc_sr & ssc_substream_mask) {
+ dma_params->dma_intr_handler(ssc_sr,
+ dma_params->
+ substream);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ int dir_mask;
+
+ pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir_mask = SSC_DIR_MASK_PLAYBACK;
+ else
+ dir_mask = SSC_DIR_MASK_CAPTURE;
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
+ (dir ? "receive" : "transmit"),
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ dma_params->ssc = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ if (ssc_p->initialized) {
+ /* Shutdown the SSC clock. */
+ pr_debug("atmel_ssc_dau: Stopping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+
+ free_irq(ssc_p->ssc->irq, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case ATMEL_SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case ATMEL_SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case ATMEL_SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ int id = rtd->dai->cpu_dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ int start_event;
+ int ret;
+
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = &ssc_dma_params[id][dir];
+ dma_params->ssc = ssc_p->ssc;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ /*
+ * The cpu_dai->dma_data field is only used to communicate the
+ * appropriate DMA parameters to the pcm driver hw_params()
+ * function. It should not be used for other purposes
+ * as it is common to all substreams.
+ */
+ rtd->dai->cpu_dai->dma_data = dma_params;
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: sample size %d"
+ "is too large for I2S\n", bits);
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated
+ * from the MCK divider, and the BCLK signal
+ * is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, (bits - 1))
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, (bits - 1))
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * I2S format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is
+ * generated from the transmit clock.
+ *
+ * For single channel data, one sample is transferred
+ * on the falling edge of the LRC clock.
+ * For two channel data, one sample is
+ * transferred on both edges of the LRC clock.
+ */
+ start_event = ((channels == 1)
+ ? SSC_START_FALLING_RF
+ : SSC_START_EDGE_RF);
+
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output
+ * on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ break;
+ }
+ pr_debug("atmel_ssc_hw_params: "
+ "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+
+ /* Enable PMC peripheral clock for this SSC */
+ pr_debug("atmel_ssc_dai: Starting clock\n");
+ clk_enable(ssc_p->ssc->clk);
+
+ /* Reset the SSC and its PDC registers */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+
+ ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+ ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: request_irq failure\n");
+ pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+
+ pr_debug("%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct platform_device *pdev,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* Save the status register before disabling transmit and receive */
+ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+ /* Save the current interrupt mask, then disable unmasked interrupts */
+ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+ ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+ ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+ ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+ ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+ ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+ ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+ return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct platform_device *pdev,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+ u32 cr;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* restore SSC register settings */
+ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+ ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+ ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+ /* re-enable interrupts */
+ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+ /* Re-enable recieve and transmit as appropriate */
+ cr = 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+ ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+ return 0;
+}
+#else /* CONFIG_PM */
+# define atmel_ssc_suspend NULL
+# define atmel_ssc_resume NULL
+#endif /* CONFIG_PM */
+
+
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000)
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "atmel-ssc0",
+ .id = 0,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[0],
+ },
+#if NUM_SSC_DEVICES == 3
+ { .name = "atmel-ssc1",
+ .id = 1,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[1],
+ },
+ { .name = "atmel-ssc2",
+ .id = 2,
+ .type = SND_SOC_DAI_PCM,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,},
+ .dai_ops = {
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[2],
+ },
+#endif
+};
+EXPORT_SYMBOL_GPL(atmel_ssc_dai);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_SSC_DAI_H
+#define _ATMEL_SSC_DAI_H
+
+#include <linux/types.h>
+#include <linux/atmel-ssc.h>
+
+#include "atmel-pcm.h"
+
+/* SSC system clock ids */
+#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
+
+/* SSC divider ids */
+#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */
+#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
+#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
+/*
+ * SSC direction masks
+ */
+#define SSC_DIR_MASK_UNUSED 0
+#define SSC_DIR_MASK_PLAYBACK 1
+#define SSC_DIR_MASK_CAPTURE 2
+
+/*
+ * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
+ * are expected to be used with SSC_BF
+ */
+/* START bit field values */
+#define SSC_START_CONTINUOUS 0
+#define SSC_START_TX_RX 1
+#define SSC_START_LOW_RF 2
+#define SSC_START_HIGH_RF 3
+#define SSC_START_FALLING_RF 4
+#define SSC_START_RISING_RF 5
+#define SSC_START_LEVEL_RF 6
+#define SSC_START_EDGE_RF 7
+#define SSS_START_COMPARE_0 8
+
+/* CKI bit field values */
+#define SSC_CKI_FALLING 0
+#define SSC_CKI_RISING 1
+
+/* CKO bit field values */
+#define SSC_CKO_NONE 0
+#define SSC_CKO_CONTINUOUS 1
+#define SSC_CKO_TRANSFER 2
+
+/* CKS bit field values */
+#define SSC_CKS_DIV 0
+#define SSC_CKS_CLOCK 1
+#define SSC_CKS_PIN 2
+
+/* FSEDGE bit field values */
+#define SSC_FSEDGE_POSITIVE 0
+#define SSC_FSEDGE_NEGATIVE 1
+
+/* FSOS bit field values */
+#define SSC_FSOS_NONE 0
+#define SSC_FSOS_NEGATIVE 1
+#define SSC_FSOS_POSITIVE 2
+#define SSC_FSOS_LOW 3
+#define SSC_FSOS_HIGH 4
+#define SSC_FSOS_TOGGLE 5
+
+#define START_DELAY 1
+
+struct atmel_ssc_state {
+ u32 ssc_cmr;
+ u32 ssc_rcmr;
+ u32 ssc_rfmr;
+ u32 ssc_tcmr;
+ u32 ssc_tfmr;
+ u32 ssc_sr;
+ u32 ssc_imr;
+};
+
+
+struct atmel_ssc_info {
+ char *name;
+ struct ssc_device *ssc;
+ spinlock_t lock; /* lock for dir_mask */
+ unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
+ unsigned short initialized; /* true if SSC has been initialized */
+ unsigned short daifmt;
+ unsigned short cmr_div;
+ unsigned short tcmr_period;
+ unsigned short rcmr_period;
+ struct atmel_pcm_dma_params *dma_params[2];
+ struct atmel_ssc_state ssc_state;
+};
+extern struct snd_soc_dai atmel_ssc_dai[];
+
+#endif /* _AT91_SSC_DAI_H */
#include <mach/portmux.h>
#include "../codecs/wm8510.h"
-#include "at32-pcm.h"
-#include "at32-ssc.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
/*-------------------------------------------------------------------------*\
projects / linux-2.6-omap-h63xx.git / commitdiff