return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0);
}
+/*
+ * Clock source related code
+ */
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = HPET_MASK,
+ .shift = HPET_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
/*
* Try to setup the HPET timer
*/
{
unsigned long id;
uint64_t hpet_freq;
+ u64 tmp;
if (!is_hpet_capable())
return 0;
/* Start the counter */
hpet_start_counter();
+ /* Initialize and register HPET clocksource
+ *
+ * hpet period is in femto seconds per cycle
+ * so we need to convert this to ns/cyc units
+ * aproximated by mult/2^shift
+ *
+ * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+ * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+ * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+ * (fsec/cyc << shift)/1000000 = mult
+ * (hpet_period << shift)/FSEC_PER_NSEC = mult
+ */
+ tmp = (u64)hpet_period << HPET_SHIFT;
+ do_div(tmp, FSEC_PER_NSEC);
+ clocksource_hpet.mult = (u32)tmp;
+
+ clocksource_register(&clocksource_hpet);
+
+
if (id & HPET_ID_LEGSUP) {
hpet_enable_int();
hpet_reserve_platform_timers(id);
return 0;
}
-/*
- * Clock source related code
- */
-static cycle_t read_hpet(void)
-{
- return (cycle_t)hpet_readl(HPET_COUNTER);
-}
-
-static struct clocksource clocksource_hpet = {
- .name = "hpet",
- .rating = 250,
- .read = read_hpet,
- .mask = HPET_MASK,
- .shift = HPET_SHIFT,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_hpet_clocksource(void)
-{
- u64 tmp;
-
- if (!hpet_virt_address)
- return -ENODEV;
-
- /*
- * hpet period is in femto seconds per cycle
- * so we need to convert this to ns/cyc units
- * aproximated by mult/2^shift
- *
- * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
- * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
- * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
- * (fsec/cyc << shift)/1000000 = mult
- * (hpet_period << shift)/FSEC_PER_NSEC = mult
- */
- tmp = (u64)hpet_period << HPET_SHIFT;
- do_div(tmp, FSEC_PER_NSEC);
- clocksource_hpet.mult = (u32)tmp;
-
- return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
#ifdef CONFIG_HPET_EMULATE_RTC
clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20);
return clocksource_register(&clocksource_pit);
}
-module_init(init_pit_clocksource);
+arch_initcall(init_pit_clocksource);
conswitchp = &dummy_con;
#endif
#endif
- tsc_init();
}
*/
void __init time_init(void)
{
+ tsc_init();
late_time_init = choose_time_init();
}
EXPORT_SYMBOL(recalibrate_cpu_khz);
-void __init tsc_init(void)
-{
- if (!cpu_has_tsc || tsc_disable)
- goto out_no_tsc;
-
- cpu_khz = calculate_cpu_khz();
- tsc_khz = cpu_khz;
-
- if (!cpu_khz)
- goto out_no_tsc;
-
- printk("Detected %lu.%03lu MHz processor.\n",
- (unsigned long)cpu_khz / 1000,
- (unsigned long)cpu_khz % 1000);
-
- set_cyc2ns_scale(cpu_khz);
- use_tsc_delay();
- return;
-
-out_no_tsc:
- /*
- * Set the tsc_disable flag if there's no TSC support, this
- * makes it a fast flag for the kernel to see whether it
- * should be using the TSC.
- */
- tsc_disable = 1;
-}
-
#ifdef CONFIG_CPU_FREQ
/*
static inline void check_geode_tsc_reliable(void) { }
#endif
-static int __init init_tsc_clocksource(void)
+
+void __init tsc_init(void)
{
+ if (!cpu_has_tsc || tsc_disable)
+ goto out_no_tsc;
- if (cpu_has_tsc && tsc_khz && !tsc_disable) {
- /* check blacklist */
- dmi_check_system(bad_tsc_dmi_table);
+ cpu_khz = calculate_cpu_khz();
+ tsc_khz = cpu_khz;
- unsynchronized_tsc();
- check_geode_tsc_reliable();
- current_tsc_khz = tsc_khz;
- clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
- clocksource_tsc.shift);
- /* lower the rating if we already know its unstable: */
- if (check_tsc_unstable()) {
- clocksource_tsc.rating = 0;
- clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- }
+ if (!cpu_khz)
+ goto out_no_tsc;
- return clocksource_register(&clocksource_tsc);
+ printk("Detected %lu.%03lu MHz processor.\n",
+ (unsigned long)cpu_khz / 1000,
+ (unsigned long)cpu_khz % 1000);
+
+ set_cyc2ns_scale(cpu_khz);
+ use_tsc_delay();
+
+ /* Check and install the TSC clocksource */
+ dmi_check_system(bad_tsc_dmi_table);
+
+ unsynchronized_tsc();
+ check_geode_tsc_reliable();
+ current_tsc_khz = tsc_khz;
+ clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
+ clocksource_tsc.shift);
+ /* lower the rating if we already know its unstable: */
+ if (check_tsc_unstable()) {
+ clocksource_tsc.rating = 0;
+ clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
}
+ clocksource_register(&clocksource_tsc);
- return 0;
-}
+ return;
-module_init(init_tsc_clocksource);
+out_no_tsc:
+ /*
+ * Set the tsc_disable flag if there's no TSC support, this
+ * makes it a fast flag for the kernel to see whether it
+ * should be using the TSC.
+ */
+ tsc_disable = 1;
+}
#include <asm/timex.h>
#include <asm/hpet.h>
+#define HPET_MASK 0xFFFFFFFF
+#define HPET_SHIFT 22
+
+/* FSEC = 10^-15 NSEC = 10^-9 */
+#define FSEC_PER_NSEC 1000000
+
int nohpet __initdata;
unsigned long hpet_address;
return 0;
}
+static cycle_t read_hpet(void)
+{
+ return (cycle_t)hpet_readl(HPET_COUNTER);
+}
+
+static cycle_t __vsyscall_fn vread_hpet(void)
+{
+ return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
+}
+
+struct clocksource clocksource_hpet = {
+ .name = "hpet",
+ .rating = 250,
+ .read = read_hpet,
+ .mask = (cycle_t)HPET_MASK,
+ .mult = 0, /* set below */
+ .shift = HPET_SHIFT,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .vread = vread_hpet,
+};
+
int hpet_arch_init(void)
{
unsigned int id;
+ u64 tmp;
if (!hpet_address)
return -1;
hpet_use_timer = (id & HPET_ID_LEGSUP);
+ /*
+ * hpet period is in femto seconds per cycle
+ * so we need to convert this to ns/cyc units
+ * aproximated by mult/2^shift
+ *
+ * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
+ * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
+ * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
+ * (fsec/cyc << shift)/1000000 = mult
+ * (hpet_period << shift)/FSEC_PER_NSEC = mult
+ */
+ tmp = (u64)hpet_period << HPET_SHIFT;
+ do_div(tmp, FSEC_PER_NSEC);
+ clocksource_hpet.mult = (u32)tmp;
+ clocksource_register(&clocksource_hpet);
+
return hpet_timer_stop_set_go(hpet_tick);
}
}
__setup("nohpet", nohpet_setup);
-
-#define HPET_MASK 0xFFFFFFFF
-#define HPET_SHIFT 22
-
-/* FSEC = 10^-15 NSEC = 10^-9 */
-#define FSEC_PER_NSEC 1000000
-
-static void *hpet_ptr;
-
-static cycle_t read_hpet(void)
-{
- return (cycle_t)readl(hpet_ptr);
-}
-
-static cycle_t __vsyscall_fn vread_hpet(void)
-{
- return readl((void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
-}
-
-struct clocksource clocksource_hpet = {
- .name = "hpet",
- .rating = 250,
- .read = read_hpet,
- .mask = (cycle_t)HPET_MASK,
- .mult = 0, /* set below */
- .shift = HPET_SHIFT,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- .vread = vread_hpet,
-};
-
-static int __init init_hpet_clocksource(void)
-{
- unsigned long hpet_period;
- void __iomem *hpet_base;
- u64 tmp;
-
- if (!hpet_address)
- return -ENODEV;
-
- /* calculate the hpet address: */
- hpet_base = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
- hpet_ptr = hpet_base + HPET_COUNTER;
-
- /* calculate the frequency: */
- hpet_period = readl(hpet_base + HPET_PERIOD);
-
- /*
- * hpet period is in femto seconds per cycle
- * so we need to convert this to ns/cyc units
- * aproximated by mult/2^shift
- *
- * fsec/cyc * 1nsec/1000000fsec = nsec/cyc = mult/2^shift
- * fsec/cyc * 1ns/1000000fsec * 2^shift = mult
- * fsec/cyc * 2^shift * 1nsec/1000000fsec = mult
- * (fsec/cyc << shift)/1000000 = mult
- * (hpet_period << shift)/FSEC_PER_NSEC = mult
- */
- tmp = (u64)hpet_period << HPET_SHIFT;
- do_div(tmp, FSEC_PER_NSEC);
- clocksource_hpet.mult = (u32)tmp;
-
- return clocksource_register(&clocksource_hpet);
-}
-
-module_init(init_hpet_clocksource);
set_cyc2ns_scale(cpu_khz);
printk(KERN_INFO "time.c: Detected %d.%03d MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
+ init_tsc_clocksource();
+
setup_irq(0, &irq0);
}
}
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
-static int __init init_tsc_clocksource(void)
+void __init init_tsc_clocksource(void)
{
if (!notsc) {
clocksource_tsc.mult = clocksource_khz2mult(cpu_khz,
if (check_tsc_unstable())
clocksource_tsc.rating = 0;
- return clocksource_register(&clocksource_tsc);
+ clocksource_register(&clocksource_tsc);
}
- return 0;
}
-
-module_init(init_tsc_clocksource);
return clocksource_register(&clocksource_acpi_pm);
}
-module_init(init_acpi_pm_clocksource);
+/* We use fs_initcall because we want the PCI fixups to have run
+ * but we still need to load before device_initcall
+ */
+fs_initcall(init_acpi_pm_clocksource);
return clocksource_register(&clocksource_cyclone);
}
-module_init(init_cyclone_clocksource);
+arch_initcall(init_cyclone_clocksource);
extern void tsc_init(void);
extern void mark_tsc_unstable(void);
extern int unsynchronized_tsc(void);
+extern void init_tsc_clocksource(void);
/*
* Boot-time check whether the TSCs are synchronized across
static char override_name[32];
static int finished_booting;
-/* clocksource_done_booting - Called near the end of bootup
+/* clocksource_done_booting - Called near the end of core bootup
*
- * Hack to avoid lots of clocksource churn at boot time
+ * Hack to avoid lots of clocksource churn at boot time.
+ * We use fs_initcall because we want this to start before
+ * device_initcall but after subsys_initcall.
*/
static int __init clocksource_done_booting(void)
{
finished_booting = 1;
return 0;
}
-late_initcall(clocksource_done_booting);
+fs_initcall(clocksource_done_booting);
#ifdef CONFIG_CLOCKSOURCE_WATCHDOG
static LIST_HEAD(watchdog_list);
projects / linux-2.6-omap-h63xx.git / commitdiff