-/*
- * idprom.h: Macros and defines for idprom routines
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC64_IDPROM_H
-#define _SPARC64_IDPROM_H
-
-#include <linux/types.h>
-
-struct idprom {
-       u8              id_format;      /* Format identifier (always 0x01) */
-       u8              id_machtype;    /* Machine type */
-       u8              id_ethaddr[6];  /* Hardware ethernet address */
-       s32             id_date;        /* Date of manufacture */
-       u32             id_sernum:24;   /* Unique serial number */
-       u8              id_cksum;       /* Checksum - xor of the data bytes */
-       u8              reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#endif /* !(_SPARC_IDPROM_H) */
+#include <asm-sparc/idprom.h>
 
-/*
- * include/asm-sparc64/sunbpp.h
- */
-
-#ifndef _ASM_SPARC64_SUNBPP_H
-#define _ASM_SPARC64_SUNBPP_H
-
-struct bpp_regs {
-  /* DMA registers */
-  __volatile__ __u32 p_csr;            /* DMA Control/Status Register */
-  __volatile__ __u32 p_addr;           /* Address Register */
-  __volatile__ __u32 p_bcnt;           /* Byte Count Register */
-  __volatile__ __u32 p_tst_csr;                /* Test Control/Status (DMA2 only) */
-  /* Parallel Port registers */
-  __volatile__ __u16 p_hcr;            /* Hardware Configuration Register */
-  __volatile__ __u16 p_ocr;            /* Operation Configuration Register */
-  __volatile__ __u8 p_dr;              /* Parallel Data Register */
-  __volatile__ __u8 p_tcr;             /* Transfer Control Register */
-  __volatile__ __u8 p_or;              /* Output Register */
-  __volatile__ __u8 p_ir;              /* Input Register */
-  __volatile__ __u16 p_icr;            /* Interrupt Control Register */
-};
-
-/* P_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* P_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* P_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* P_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* P_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* P_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-#endif /* !(_ASM_SPARC64_SUNBPP_H) */
+#include <asm-sparc/sunbpp.h>