Remove some sort of bloaty code, try to get these pin_req arrays built at compile-time
 - move this static things to the blackfin board file
 - add pin_req array to struct bfin5xx_spi_master
 - tested on BF537/BF548 with SPI flash
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
 #include <asm/nand.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */
 
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */
 
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 #include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/reboot.h>
+#include <asm/portmux.h>
 #include <linux/spi/ad7877.h>
 
 /*
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 /* SPI (0) */
 
 #include <asm/dma.h>
 #include <asm/gpio.h>
 #include <asm/nand.h>
+#include <asm/portmux.h>
 #include <asm/mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
 };
 
 /* SPI controller data */
-static struct bfin5xx_spi_master bf54x_spi_master_info = {
+static struct bfin5xx_spi_master bf54x_spi_master_info0 = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bf54x_spi_master0 = {
        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
        .resource = bfin_spi0_resource,
        .dev = {
-               .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+               .platform_data = &bf54x_spi_master_info0, /* Passed to driver */
                },
 };
 
+static struct bfin5xx_spi_master bf54x_spi_master_info1 = {
+       .num_chipselect = 8,
+       .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
+};
+
 static struct platform_device bf54x_spi_master1 = {
        .name = "bfin-spi",
        .id = 1, /* Bus number */
        .num_resources = ARRAY_SIZE(bfin_spi1_resource),
        .resource = bfin_spi1_resource,
        .dev = {
-               .platform_data = &bf54x_spi_master_info, /* Passed to driver */
+               .platform_data = &bf54x_spi_master_info1, /* Passed to driver */
                },
 };
 #endif  /* spi master and devices */
 
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {
 
 #include <linux/pata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
 
 /*
  * Name the Board for the /proc/cpuinfo
 static struct bfin5xx_spi_master bfin_spi0_info = {
        .num_chipselect = 8,
        .enable_dma = 1,  /* master has the ability to do dma transfer */
+       .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 };
 
 static struct platform_device bfin_spi0_device = {