IXP4xx: add Ethernet and NPE support for IXP43x CPU.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>

diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index c73a94d0ca2ba12a43867b8c4dd2418dcadeb50a..252310234903d96147cc737729231cf9c161c392 100644 (file)
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
                for (i = 0; i < image->size; i++)
                        image->data[i] = swab32(image->data[i]);
 
-       if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-               print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+       if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+               print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
                          "IXP42x\n");
                goto err;
        }
@@ -596,7 +596,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
                  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
                  (image->id >> 8) & 0xFF, image->id & 0xFF);
 
-       if (!cpu_is_ixp46x()) {
+       if (cpu_is_ixp42x()) {
                if (!npe->id)
                        instr_size = NPE_A_42X_INSTR_SIZE;
                else

diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 5fce1d5c1a1a6cf273bc25b9983a10f620201df3..9cc43476bfa632f7e89e74a9dc04c9cb5469db49 100644 (file)
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -335,11 +335,20 @@ static int ixp4xx_mdio_register(void)
        if (!(mdio_bus = mdiobus_alloc()))
                return -ENOMEM;
 
-       /* All MII PHY accesses use NPE-B Ethernet registers */
-       spin_lock_init(&mdio_lock);
-       mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-       __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+       if (cpu_is_ixp43x()) {
+               /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
+               if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
+                       return -ENOSYS;
+               mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+       } else {
+               /* All MII PHY accesses use NPE-B Ethernet registers */
+               if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
+                       return -ENOSYS;
+               mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+       }
 
+       __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+       spin_lock_init(&mdio_lock);
        mdio_bus->name = "IXP4xx MII Bus";
        mdio_bus->read = &ixp4xx_mdio_read;
        mdio_bus->write = &ixp4xx_mdio_write;
@@ -1250,9 +1259,6 @@ static struct platform_driver ixp4xx_eth_driver = {
 static int __init eth_init_module(void)
 {
        int err;
-       if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-               return -ENOSYS;
-
        if ((err = ixp4xx_mdio_register()))
                return err;
        return platform_driver_register(&ixp4xx_eth_driver);