[RAPIDIO] Add RapidIO node into MPC8641HPCN dts file

This adds properties describing the RapidIO controller to the
device-tree source for the MPC8641HPCN board.

Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 7f9b999843ce2e25a81c1c038c2a6ed05c3842e7..1e4bfe9cadb99093f58532aed1eea73a4cdf3c3e 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -26,6 +26,7 @@
                serial1 = &serial1;
                pci0 = &pci0;
                pci1 = &pci1;
+               rapidio0 = &rapidio0;
        };
 
        cpus {
@@ -500,4 +501,15 @@
                                  0x0 0x00100000>;
                };
        };
+       rapidio0: rapidio@f80c0000 {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               compatible = "fsl,rapidio-delta";
+               reg = <0xf80c0000 0x20000>;
+               ranges = <0 0 0xc0000000 0 0x20000000>;
+               interrupt-parent = <&mpic>;
+               /* err_irq bell_outb_irq bell_inb_irq
+                       msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */
+               interrupts = <48 2 49 2 50 2 53 2 54 2 55 2 56 2>;
+       };
 };