/* These are listed in *rough* order of decreasing usefulness and
    increasing noise level. */
-#define PVR2_TRACE_INFO       (1 <<  0) // Normal messages
-#define PVR2_TRACE_ERROR_LEGS (1 <<  1) // error messages
-#define PVR2_TRACE_TOLERANCE  (1 <<  2) // track tolerance-affected errors
-#define PVR2_TRACE_TRAP       (1 <<  3) // Trap & report misbehavior from app
-#define PVR2_TRACE_INIT       (1 <<  4) // misc initialization steps
-#define PVR2_TRACE_START_STOP (1 <<  5) // Streaming start / stop
-#define PVR2_TRACE_CTL        (1 <<  6) // commit of control changes
-#define PVR2_TRACE_DEBUG      (1 <<  7) // Temporary debug code
-#define PVR2_TRACE_EEPROM     (1 <<  8) // eeprom parsing / report
-#define PVR2_TRACE_STRUCT     (1 <<  9) // internal struct creation
-#define PVR2_TRACE_OPEN_CLOSE (1 << 10) // application open / close
-#define PVR2_TRACE_CREG       (1 << 11) // Main critical region entry / exit
-#define PVR2_TRACE_SYSFS      (1 << 12) // Sysfs driven I/O
-#define PVR2_TRACE_FIRMWARE   (1 << 13) // firmware upload actions
-#define PVR2_TRACE_CHIPS      (1 << 14) // chip broadcast operation
-#define PVR2_TRACE_I2C        (1 << 15) // I2C related stuff
-#define PVR2_TRACE_I2C_CMD    (1 << 16) // Software commands to I2C modules
-#define PVR2_TRACE_I2C_CORE   (1 << 17) // I2C core debugging
-#define PVR2_TRACE_I2C_TRAF   (1 << 18) // I2C traffic through the adapter
-#define PVR2_TRACE_V4LIOCTL   (1 << 19) // v4l ioctl details
-#define PVR2_TRACE_ENCODER    (1 << 20) // mpeg2 encoder operation
-#define PVR2_TRACE_BUF_POOL   (1 << 21) // Track buffer pool management
-#define PVR2_TRACE_BUF_FLOW   (1 << 22) // Track buffer flow in system
-#define PVR2_TRACE_DATA_FLOW  (1 << 23) // Track data flow
-#define PVR2_TRACE_DEBUGIFC   (1 << 24) // Debug interface actions
-#define PVR2_TRACE_GPIO       (1 << 25) // GPIO state bit changes
+#define PVR2_TRACE_INFO       (1 <<  0) /* Normal messages */
+#define PVR2_TRACE_ERROR_LEGS (1 <<  1) /* error messages */
+#define PVR2_TRACE_TOLERANCE  (1 <<  2) /* track tolerance-affected errors */
+#define PVR2_TRACE_TRAP       (1 <<  3) /* Trap & report app misbehavior */
+#define PVR2_TRACE_STD        (1 <<  4) /* Log video standard stuff */
+#define PVR2_TRACE_INIT       (1 <<  5) /* misc initialization steps */
+#define PVR2_TRACE_START_STOP (1 <<  6) /* Streaming start / stop */
+#define PVR2_TRACE_CTL        (1 <<  7) /* commit of control changes */
+#define PVR2_TRACE_DEBUG      (1 <<  8) /* Temporary debug code */
+#define PVR2_TRACE_EEPROM     (1 <<  9) /* eeprom parsing / report */
+#define PVR2_TRACE_STRUCT     (1 << 10) /* internal struct creation */
+#define PVR2_TRACE_OPEN_CLOSE (1 << 11) /* application open / close */
+#define PVR2_TRACE_CREG       (1 << 12) /* Main critical region entry / exit */
+#define PVR2_TRACE_SYSFS      (1 << 13) /* Sysfs driven I/O */
+#define PVR2_TRACE_FIRMWARE   (1 << 14) /* firmware upload actions */
+#define PVR2_TRACE_CHIPS      (1 << 15) /* chip broadcast operation */
+#define PVR2_TRACE_I2C        (1 << 16) /* I2C related stuff */
+#define PVR2_TRACE_I2C_CMD    (1 << 17) /* Software commands to I2C modules */
+#define PVR2_TRACE_I2C_CORE   (1 << 18) /* I2C core debugging */
+#define PVR2_TRACE_I2C_TRAF   (1 << 19) /* I2C traffic through the adapter */
+#define PVR2_TRACE_V4LIOCTL   (1 << 20) /* v4l ioctl details */
+#define PVR2_TRACE_ENCODER    (1 << 21) /* mpeg2 encoder operation */
+#define PVR2_TRACE_BUF_POOL   (1 << 22) /* Track buffer pool management */
+#define PVR2_TRACE_BUF_FLOW   (1 << 23) /* Track buffer flow in system */
+#define PVR2_TRACE_DATA_FLOW  (1 << 24) /* Track data flow */
+#define PVR2_TRACE_DEBUGIFC   (1 << 25) /* Debug interface actions */
+#define PVR2_TRACE_GPIO       (1 << 26) /* GPIO state bit changes */
 
 
 #endif /* __PVRUSB2_HDW_INTERNAL_H */
 
        std1 = get_default_standard(hdw);
 
        bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
-       pvr2_trace(PVR2_TRACE_INIT,
+       pvr2_trace(PVR2_TRACE_STD,
                   "Supported video standard(s) reported by eeprom: %.*s",
                   bcnt,buf);
 
        std2 = std1 & ~hdw->std_mask_avail;
        if (std2) {
                bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
-               pvr2_trace(PVR2_TRACE_INIT,
+               pvr2_trace(PVR2_TRACE_STD,
                           "Expanding supported video standards"
                           " to include: %.*s",
                           bcnt,buf);
 
        if (std1) {
                bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
-               pvr2_trace(PVR2_TRACE_INIT,
+               pvr2_trace(PVR2_TRACE_STD,
                           "Initial video standard forced to %.*s",
                           bcnt,buf);
                hdw->std_mask_cur = std1;
                             hdw->std_mask_eeprom)) continue;
                        bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
                                                  std_eeprom_maps[idx].std);
-                       pvr2_trace(PVR2_TRACE_INIT,
+                       pvr2_trace(PVR2_TRACE_STD,
                                   "Initial video standard guessed as %.*s",
                                   bcnt,buf);
                        hdw->std_mask_cur = std_eeprom_maps[idx].std;
                hdw->std_enum_cur = 1;
                hdw->std_mask_cur = hdw->std_defs[hdw->std_enum_cur-1].id;
                hdw->std_dirty = !0;
-               pvr2_trace(PVR2_TRACE_INIT,
+               pvr2_trace(PVR2_TRACE_STD,
                           "Initial video standard auto-selected to %s",
                           hdw->std_defs[hdw->std_enum_cur-1].name);
                return;
 
        std->id = id;
        bcnt = pvr2_std_id_to_str(std->name,sizeof(std->name)-1,id);
        std->name[bcnt] = 0;
-       pvr2_trace(PVR2_TRACE_INIT,"Set up standard idx=%u name=%s",
+       pvr2_trace(PVR2_TRACE_STD,"Set up standard idx=%u name=%s",
                   std->index,std->name);
        return !0;
 }
        v4l2_std_id idmsk,cmsk,fmsk;
        struct v4l2_standard *stddefs;
 
-       if (pvrusb2_debug & PVR2_TRACE_INIT) {
+       if (pvrusb2_debug & PVR2_TRACE_STD) {
                char buf[50];
                bcnt = pvr2_std_id_to_str(buf,sizeof(buf),id);
                pvr2_trace(
-                       PVR2_TRACE_INIT,"Mapping standards mask=0x%x (%.*s)",
+                       PVR2_TRACE_STD,"Mapping standards mask=0x%x (%.*s)",
                        (int)id,bcnt,buf);
        }
 
                        bcnt,buf);
        }
 
-       pvr2_trace(PVR2_TRACE_INIT,"Setting up %u unique standard(s)",
+       pvr2_trace(PVR2_TRACE_STD,"Setting up %u unique standard(s)",
                   std_cnt);
        if (!std_cnt) return NULL; // paranoia